12 files changed, 383 insertions, 50 deletions

diff --git a/include/linux/arm-cci.h b/include/linux/arm-cci.h
new file mode 100644
index 000000000000..79d6edf446d5
--- /dev/null
+++ b/include/linux/arm-cci.h
@@ -0,0 +1,61 @@
+/*
+ * CCI cache coherent interconnect support
+ *
+ * Copyright (C) 2013 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_ARM_CCI_H
+#define __LINUX_ARM_CCI_H
+
+#include <linux/errno.h>
+#include <linux/types.h>
+
+struct device_node;
+
+#ifdef CONFIG_ARM_CCI
+extern bool cci_probed(void);
+extern int cci_ace_get_port(struct device_node *dn);
+extern int cci_disable_port_by_cpu(u64 mpidr);
+extern int __cci_control_port_by_device(struct device_node *dn, bool enable);
+extern int __cci_control_port_by_index(u32 port, bool enable);
+#else
+static inline bool cci_probed(void) { return false; }
+static inline int cci_ace_get_port(struct device_node *dn)
+{
+        return -ENODEV;
+}
+static inline int cci_disable_port_by_cpu(u64 mpidr) { return -ENODEV; }
+static inline int __cci_control_port_by_device(struct device_node *dn,
+                                               bool enable)
+{
+        return -ENODEV;
+}
+static inline int __cci_control_port_by_index(u32 port, bool enable)
+{
+        return -ENODEV;
+}
+#endif
+#define cci_disable_port_by_device(dev) \
+        __cci_control_port_by_device(dev, false)
+#define cci_enable_port_by_device(dev) \
+        __cci_control_port_by_device(dev, true)
+#define cci_disable_port_by_index(dev) \
+        __cci_control_port_by_index(dev, false)
+#define cci_enable_port_by_index(dev) \
+        __cci_control_port_by_index(dev, true)
+
+#endif
diff --git a/include/linux/clk/mvebu.h b/include/linux/clk/mvebu.h
deleted file mode 100644
index 8c4ae713b063..000000000000
--- a/include/linux/clk/mvebu.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __CLK_MVEBU_H_
-#define __CLK_MVEBU_H_
-
-void __init mvebu_clocks_init(void);
-
-#endif
diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h
index 56be7cd9aa8b..e062d317ccce 100644
--- a/include/linux/clk/zynq.h
+++ b/include/linux/clk/zynq.h
@@ -1,4 +1,5 @@
 /*
+ * Copyright (C) 2013 Xilinx Inc.
  * Copyright (C) 2012 National Instruments
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,6 +20,11 @@
 #ifndef __LINUX_CLK_ZYNQ_H_
 #define __LINUX_CLK_ZYNQ_H_
 
-void __init xilinx_zynq_clocks_init(void __iomem *slcr);
+#include <linux/spinlock.h>
 
+void zynq_clock_init(void __iomem *slcr);
+
+struct clk *clk_register_zynq_pll(const char *name, const char *parent,
+                void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index,
+                spinlock_t *lock);
 #endif
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index dd755ce2a5eb..07261d52a6df 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -53,5 +53,4 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs);
 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
 void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
 
-extern void dw_apb_timer_init(void);
 #endif /* __DW_APB_TIMER_H__ */
diff --git a/include/linux/mfd/davinci_voicecodec.h b/include/linux/mfd/davinci_voicecodec.h
index 0ab61320ffa8..7dd6524d2aac 100644
--- a/include/linux/mfd/davinci_voicecodec.h
+++ b/include/linux/mfd/davinci_voicecodec.h
@@ -26,8 +26,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/core.h>
-
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
 
 /*
  * Register values.
diff --git a/include/linux/mfd/syscon/clps711x.h b/include/linux/mfd/syscon/clps711x.h
new file mode 100644
index 000000000000..26355abae515
--- /dev/null
+++ b/include/linux/mfd/syscon/clps711x.h
@@ -0,0 +1,94 @@
+/*
+ *  CLPS711X system register bits definitions
+ *
+ *  Copyright (C) 2013 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _LINUX_MFD_SYSCON_CLPS711X_H_
+#define _LINUX_MFD_SYSCON_CLPS711X_H_
+
+#define SYSCON_OFFSET           (0x00)
+#define SYSFLG_OFFSET           (0x40)
+
+#define SYSCON1_KBDSCAN(x)      ((x) & 15)
+#define SYSCON1_KBDSCAN_MASK    (15)
+#define SYSCON1_TC1M            (1 << 4)
+#define SYSCON1_TC1S            (1 << 5)
+#define SYSCON1_TC2M            (1 << 6)
+#define SYSCON1_TC2S            (1 << 7)
+#define SYSCON1_BZTOG           (1 << 9)
+#define SYSCON1_BZMOD           (1 << 10)
+#define SYSCON1_DBGEN           (1 << 11)
+#define SYSCON1_LCDEN           (1 << 12)
+#define SYSCON1_CDENTX          (1 << 13)
+#define SYSCON1_CDENRX          (1 << 14)
+#define SYSCON1_SIREN           (1 << 15)
+#define SYSCON1_ADCKSEL(x)      (((x) & 3) << 16)
+#define SYSCON1_ADCKSEL_MASK    (3 << 16)
+#define SYSCON1_EXCKEN          (1 << 18)
+#define SYSCON1_WAKEDIS         (1 << 19)
+#define SYSCON1_IRTXM           (1 << 20)
+
+#define SYSCON2_SERSEL          (1 << 0)
+#define SYSCON2_KBD6            (1 << 1)
+#define SYSCON2_DRAMZ           (1 << 2)
+#define SYSCON2_KBWEN           (1 << 3)
+#define SYSCON2_SS2TXEN         (1 << 4)
+#define SYSCON2_PCCARD1         (1 << 5)
+#define SYSCON2_PCCARD2         (1 << 6)
+#define SYSCON2_SS2RXEN         (1 << 7)
+#define SYSCON2_SS2MAEN         (1 << 9)
+#define SYSCON2_OSTB            (1 << 12)
+#define SYSCON2_CLKENSL         (1 << 13)
+#define SYSCON2_BUZFREQ         (1 << 14)
+
+#define SYSCON3_ADCCON          (1 << 0)
+#define SYSCON3_CLKCTL0         (1 << 1)
+#define SYSCON3_CLKCTL1         (1 << 2)
+#define SYSCON3_DAISEL          (1 << 3)
+#define SYSCON3_ADCCKNSEN       (1 << 4)
+#define SYSCON3_VERSN(x)        (((x) >> 5) & 7)
+#define SYSCON3_VERSN_MASK      (7 << 5)
+#define SYSCON3_FASTWAKE        (1 << 8)
+#define SYSCON3_DAIEN           (1 << 9)
+#define SYSCON3_128FS           SYSCON3_DAIEN
+#define SYSCON3_ENPD67          (1 << 10)
+
+#define SYSCON_UARTEN           (1 << 8)
+
+#define SYSFLG1_MCDR            (1 << 0)
+#define SYSFLG1_DCDET           (1 << 1)
+#define SYSFLG1_WUDR            (1 << 2)
+#define SYSFLG1_WUON            (1 << 3)
+#define SYSFLG1_CTS             (1 << 8)
+#define SYSFLG1_DSR             (1 << 9)
+#define SYSFLG1_DCD             (1 << 10)
+#define SYSFLG1_NBFLG           (1 << 12)
+#define SYSFLG1_RSTFLG          (1 << 13)
+#define SYSFLG1_PFFLG           (1 << 14)
+#define SYSFLG1_CLDFLG          (1 << 15)
+#define SYSFLG1_CRXFE           (1 << 24)
+#define SYSFLG1_CTXFF           (1 << 25)
+#define SYSFLG1_SSIBUSY         (1 << 26)
+#define SYSFLG1_ID              (1 << 29)
+#define SYSFLG1_VERID(x)        (((x) >> 30) & 3)
+#define SYSFLG1_VERID_MASK      (3 << 30)
+
+#define SYSFLG2_SSRXOF          (1 << 0)
+#define SYSFLG2_RESVAL          (1 << 1)
+#define SYSFLG2_RESFRM          (1 << 2)
+#define SYSFLG2_SS2RXFE         (1 << 3)
+#define SYSFLG2_SS2TXFF         (1 << 4)
+#define SYSFLG2_SS2TXUF         (1 << 5)
+#define SYSFLG2_CKMODE          (1 << 6)
+
+#define SYSFLG_UBUSY            (1 << 11)
+#define SYSFLG_URXFE            (1 << 22)
+#define SYSFLG_UTXFF            (1 << 23)
+
+#endif
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
new file mode 100644
index 000000000000..57300fd7cc03
--- /dev/null
+++ b/include/linux/platform_data/edma.h
@@ -0,0 +1,183 @@
+/*
+ *  TI EDMA definitions
+ *
+ *  Copyright (C) 2006-2013 Texas Instruments.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ *  Channel     Triggers transfers, usually from a hardware event but
+ *              also manually or by "chaining" from DMA completions.
+ *              Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ *  Slot        Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ *              "set"), source and destination addresses, a link to a
+ *              next PaRAM slot (if any), options for the transfer, and
+ *              instructions for updating those addresses.  There are
+ *              more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers.  An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers.  When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining).  The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface.  (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+        unsigned int opt;
+        unsigned int src;
+        unsigned int a_b_cnt;
+        unsigned int dst;
+        unsigned int src_dst_bidx;
+        unsigned int link_bcntrld;
+        unsigned int src_dst_cidx;
+        unsigned int ccnt;
+};
+
+/* fields in edmacc_param.opt */
+#define SAM             BIT(0)
+#define DAM             BIT(1)
+#define SYNCDIM         BIT(2)
+#define STATIC          BIT(3)
+#define EDMA_FWID       (0x07 << 8)
+#define TCCMODE         BIT(11)
+#define EDMA_TCC(t)     ((t) << 12)
+#define TCINTEN         BIT(20)
+#define ITCINTEN        BIT(21)
+#define TCCHEN          BIT(22)
+#define ITCCHEN         BIT(23)
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+        INCR = 0,
+        FIFO = 1
+};
+
+enum fifo_width {
+        W8BIT = 0,
+        W16BIT = 1,
+        W32BIT = 2,
+        W64BIT = 3,
+        W128BIT = 4,
+        W256BIT = 5
+};
+
+enum dma_event_q {
+        EVENTQ_0 = 0,
+        EVENTQ_1 = 1,
+        EVENTQ_2 = 2,
+        EVENTQ_3 = 3,
+        EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+        ASYNC = 0,
+        ABSYNC = 1
+};
+
+#define EDMA_CTLR_CHAN(ctlr, chan)      (((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i)                    ((i) >> 16)
+#define EDMA_CHAN_SLOT(i)               ((i) & 0xffff)
+
+#define EDMA_CHANNEL_ANY                -1      /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY                   -1      /* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY             1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT     1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
+
+#define EDMA_MAX_CC               2
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+        void (*callback)(unsigned channel, u16 ch_status, void *data),
+        void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(unsigned ctlr, int slot);
+void edma_free_slot(unsigned slot);
+
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+                                enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+                                 enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+                u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+struct edma_rsv_info {
+
+        const s16       (*rsv_chans)[2];
+        const s16       (*rsv_slots)[2];
+};
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+        /* how many dma resources of each type */
+        unsigned        n_channel;
+        unsigned        n_region;
+        unsigned        n_slot;
+        unsigned        n_tc;
+        unsigned        n_cc;
+        /*
+         * Default queue is expected to be a low-priority queue.
+         * This way, long transfers on the default queue started
+         * by the codec engine will not cause audio defects.
+         */
+        enum dma_event_q        default_queue;
+
+        /* Resource reservation for other cores */
+        struct edma_rsv_info    *rsv;
+
+        s8      (*queue_tc_mapping)[2];
+        s8      (*queue_priority_mapping)[2];
+        const s16       (*xbar_chans)[2];
+};
+
+#endif
diff --git a/include/linux/platform_data/gpio-rcar.h b/include/linux/platform_data/gpio-rcar.h
index b253f77a7ddf..2d8d69432813 100644
--- a/include/linux/platform_data/gpio-rcar.h
+++ b/include/linux/platform_data/gpio-rcar.h
@@ -17,10 +17,13 @@
 #define __GPIO_RCAR_H__
 
 struct gpio_rcar_config {
-        unsigned int gpio_base;
+        int gpio_base;
         unsigned int irq_base;
         unsigned int number_of_pins;
         const char *pctl_name;
+        unsigned has_both_edge_trigger:1;
 };
 
+#define RCAR_GP_PIN(bank, pin)          (((bank) * 32) + (pin))
+
 #endif /* __GPIO_RCAR_H__ */
diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h
deleted file mode 100644
index dfbc65d10484..000000000000
--- a/include/linux/platform_data/pinctrl-coh901.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2007-2012 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_U300_H
-#define __MACH_U300_GPIO_U300_H
-
-/**
- * struct u300_gpio_platform - U300 GPIO platform data
- * @ports: number of GPIO block ports
- * @gpio_base: first GPIO number for this block (use a free range)
- */
-struct u300_gpio_platform {
-        u8 ports;
-        int gpio_base;
-};
-
-#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h
index 7af305b37868..8dc2fa47a2aa 100644
--- a/include/linux/platform_data/spi-davinci.h
+++ b/include/linux/platform_data/spi-davinci.h
@@ -19,7 +19,7 @@
 #ifndef __ARCH_ARM_DAVINCI_SPI_H
 #define __ARCH_ARM_DAVINCI_SPI_H
 
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
 
 #define SPI_INTERN_CS   0xFF
 
diff --git a/include/linux/platform_data/usb-rcar-phy.h b/include/linux/platform_data/usb-rcar-phy.h
new file mode 100644
index 000000000000..8ec6964a32a5
--- /dev/null
+++ b/include/linux/platform_data/usb-rcar-phy.h
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Cogent Embedded, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __USB_RCAR_PHY_H
+#define __USB_RCAR_PHY_H
+
+#include <linux/types.h>
+
+struct rcar_phy_platform_data {
+        bool ferrite_bead:1;    /* (R8A7778 only)                       */
+
+        bool port1_func:1;      /* true: port 1 used by function, false: host */
+        unsigned penc1:1;       /* Output of the PENC1 pin in function mode */
+        struct {                /* Overcurrent pin control for ports 0..2 */
+                bool select_3_3v:1; /* true: USB_OVCn pin, false: OVCn pin */
+                                /* Set to false on port 1 in function mode */
+                bool active_high:1; /* true: active  high, false: active low */
+                                /* Set to true  on port 1 in function mode */
+        } ovc_pin[3];           /* (R8A7778 only has 2 ports)           */
+};
+
+#endif /* __USB_RCAR_PHY_H */
diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h
index 99238b096f7e..7eb4dcd0d386 100644
--- a/include/linux/usb/ehci_pdriver.h
+++ b/include/linux/usb/ehci_pdriver.h
@@ -19,6 +19,9 @@
 #ifndef __USB_CORE_EHCI_PDRIVER_H
 #define __USB_CORE_EHCI_PDRIVER_H
 
+struct platform_device;
+struct usb_hcd;
+
 /**
  * struct usb_ehci_pdata - platform_data for generic ehci driver
  *
@@ -50,6 +53,7 @@ struct usb_ehci_pdata {
         /* Turn on only VBUS suspend power and hotplug detection,
          * turn off everything else */
         void (*power_suspend)(struct platform_device *pdev);
+        int (*pre_setup)(struct usb_hcd *hcd);
 };
 
 #endif /* __USB_CORE_EHCI_PDRIVER_H */