Added missing tegra files.HEADmaster

69 files changed, 8974 insertions, 0 deletions

diff --git a/arch/arm/plat-omap/include/plat/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
new file mode 100644
index 00000000000..56e7f2e7d12
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/blizzard.h
@@ -0,0 +1,12 @@
+#ifndef _BLIZZARD_H
+#define _BLIZZARD_H
+
+struct blizzard_platform_data {
+        void            (*power_up)(struct device *dev);
+        void            (*power_down)(struct device *dev);
+        unsigned long   (*get_clock_rate)(struct device *dev);
+
+        unsigned        te_connected:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
new file mode 100644
index 00000000000..51b102dc906
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
@@ -0,0 +1,76 @@
+/*
+ * arch/arm/plat-omap/include/mach/board-ams-delta.h
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#ifndef __ASM_ARCH_OMAP_AMS_DELTA_H
+#define __ASM_ARCH_OMAP_AMS_DELTA_H
+
+#if defined (CONFIG_MACH_AMS_DELTA)
+
+#define AMS_DELTA_LATCH1_PHYS           0x01000000
+#define AMS_DELTA_LATCH1_VIRT           0xEA000000
+#define AMS_DELTA_MODEM_PHYS            0x04000000
+#define AMS_DELTA_MODEM_VIRT            0xEB000000
+#define AMS_DELTA_LATCH2_PHYS           0x08000000
+#define AMS_DELTA_LATCH2_VIRT           0xEC000000
+
+#define AMS_DELTA_LATCH1_LED_CAMERA     0x01
+#define AMS_DELTA_LATCH1_LED_ADVERT     0x02
+#define AMS_DELTA_LATCH1_LED_EMAIL      0x04
+#define AMS_DELTA_LATCH1_LED_HANDSFREE  0x08
+#define AMS_DELTA_LATCH1_LED_VOICEMAIL  0x10
+#define AMS_DELTA_LATCH1_LED_VOICE      0x20
+
+#define AMS_DELTA_LATCH2_LCD_VBLEN      0x0001
+#define AMS_DELTA_LATCH2_LCD_NDISP      0x0002
+#define AMS_DELTA_LATCH2_NAND_NCE       0x0004
+#define AMS_DELTA_LATCH2_NAND_NRE       0x0008
+#define AMS_DELTA_LATCH2_NAND_NWP       0x0010
+#define AMS_DELTA_LATCH2_NAND_NWE       0x0020
+#define AMS_DELTA_LATCH2_NAND_ALE       0x0040
+#define AMS_DELTA_LATCH2_NAND_CLE       0x0080
+#define AMD_DELTA_LATCH2_KEYBRD_PWR     0x0100
+#define AMD_DELTA_LATCH2_KEYBRD_DATA    0x0200
+#define AMD_DELTA_LATCH2_SCARD_RSTIN    0x0400
+#define AMD_DELTA_LATCH2_SCARD_CMDVCC   0x0800
+#define AMS_DELTA_LATCH2_MODEM_NRESET   0x1000
+#define AMS_DELTA_LATCH2_MODEM_CODEC    0x2000
+
+#define AMS_DELTA_GPIO_PIN_KEYBRD_DATA  0
+#define AMS_DELTA_GPIO_PIN_KEYBRD_CLK   1
+#define AMS_DELTA_GPIO_PIN_MODEM_IRQ    2
+#define AMS_DELTA_GPIO_PIN_HOOK_SWITCH  4
+#define AMS_DELTA_GPIO_PIN_SCARD_NOFF   6
+#define AMS_DELTA_GPIO_PIN_SCARD_IO     7
+#define AMS_DELTA_GPIO_PIN_CONFIG       11
+#define AMS_DELTA_GPIO_PIN_NAND_RB      12
+
+#ifndef __ASSEMBLY__
+void ams_delta_latch1_write(u8 mask, u8 value);
+void ams_delta_latch2_write(u16 mask, u16 value);
+#endif
+
+#endif /* CONFIG_MACH_AMS_DELTA */
+
+#endif /* __ASM_ARCH_OMAP_AMS_DELTA_H */
diff --git a/arch/arm/plat-omap/include/plat/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h
new file mode 100644
index 00000000000..355adbdaae3
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/board-sx1.h
@@ -0,0 +1,52 @@
+/*
+ * Siemens SX1 board definitions
+ *
+ * Copyright: Vovan888 at gmail com
+ *
+ * This package is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+ * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+ */
+
+#ifndef __ASM_ARCH_SX1_I2C_CHIPS_H
+#define __ASM_ARCH_SX1_I2C_CHIPS_H
+
+#define SOFIA_MAX_LIGHT_VAL     0x2B
+
+#define SOFIA_I2C_ADDR          0x32
+/* Sofia reg 3 bits masks */
+#define SOFIA_POWER1_REG        0x03
+
+#define SOFIA_USB_POWER         0x01
+#define SOFIA_MMC_POWER         0x04
+#define SOFIA_BLUETOOTH_POWER   0x08
+#define SOFIA_MMILIGHT_POWER    0x20
+
+#define SOFIA_POWER2_REG        0x04
+#define SOFIA_BACKLIGHT_REG     0x06
+#define SOFIA_KEYLIGHT_REG      0x07
+#define SOFIA_DIMMING_REG       0x09
+
+
+/* Function Prototypes for SX1 devices control on I2C bus */
+
+int sx1_setbacklight(u8 backlight);
+int sx1_getbacklight(u8 *backlight);
+int sx1_setkeylight(u8 keylight);
+int sx1_getkeylight(u8 *keylight);
+
+int sx1_setmmipower(u8 onoff);
+int sx1_setusbpower(u8 onoff);
+int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value);
+int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value);
+
+/* MMC prototypes */
+
+extern void sx1_mmc_init(void);
+extern void sx1_mmc_slot_cover_handler(void *arg, int state);
+
+#endif /* __ASM_ARCH_SX1_I2C_CHIPS_H */
diff --git a/arch/arm/plat-omap/include/plat/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h
new file mode 100644
index 00000000000..27916b210f5
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/board-voiceblue.h
@@ -0,0 +1,19 @@
+/*
+ * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
+ *
+ * Hardware definitions for OMAP5910 based VoiceBlue board.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_VOICEBLUE_H
+#define __ASM_ARCH_VOICEBLUE_H
+
+extern void voiceblue_wdt_enable(void);
+extern void voiceblue_wdt_disable(void);
+extern void voiceblue_wdt_ping(void);
+
+#endif /*  __ASM_ARCH_VOICEBLUE_H */
+
diff --git a/arch/arm/plat-omap/include/plat/board.h b/arch/arm/plat-omap/include/plat/board.h
new file mode 100644
index 00000000000..97126dfd288
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -0,0 +1,176 @@
+/*
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004  Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+#ifndef _OMAP_BOARD_H
+#define _OMAP_BOARD_H
+
+#include <linux/types.h>
+
+#include <plat/gpio-switch.h>
+
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *      GEN_1   = 0x01150000
+ *      GEN_2   = 0x92200000
+ */
+enum {
+        OMAP3EVM_BOARD_GEN_1 = 0,       /* EVM Rev between  A - D */
+        OMAP3EVM_BOARD_GEN_2,           /* EVM Rev >= Rev E */
+};
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK          0x4f01
+#define OMAP_TAG_LCD            0x4f05
+#define OMAP_TAG_GPIO_SWITCH    0x4f06
+#define OMAP_TAG_FBMEM          0x4f08
+#define OMAP_TAG_STI_CONSOLE    0x4f09
+#define OMAP_TAG_CAMERA_SENSOR  0x4f0a
+
+#define OMAP_TAG_BOOT_REASON    0x4f80
+#define OMAP_TAG_FLASH_PART     0x4f81
+#define OMAP_TAG_VERSION_STR    0x4f82
+
+struct omap_clock_config {
+        /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+        u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+        u8 console_uart;
+        u32 console_speed;
+};
+
+struct omap_sti_console_config {
+        unsigned enable:1;
+        u8 channel;
+};
+
+struct omap_camera_sensor_config {
+        u16 reset_gpio;
+        int (*power_on)(void * data);
+        int (*power_off)(void * data);
+};
+
+struct omap_usb_config {
+        /* Configure drivers according to the connectors on your board:
+         *  - "A" connector (rectagular)
+         *      ... for host/OHCI use, set "register_host".
+         *  - "B" connector (squarish) or "Mini-B"
+         *      ... for device/gadget use, set "register_dev".
+         *  - "Mini-AB" connector (very similar to Mini-B)
+         *      ... for OTG use as device OR host, initialize "otg"
+         */
+        unsigned        register_host:1;
+        unsigned        register_dev:1;
+        u8              otg;    /* port number, 1-based:  usb1 == 2 */
+
+        u8              hmc_mode;
+
+        /* implicitly true if otg:  host supports remote wakeup? */
+        u8              rwc;
+
+        /* signaling pins used to talk to transceiver on usbN:
+         *  0 == usbN unused
+         *  2 == usb0-only, using internal transceiver
+         *  3 == 3 wire bidirectional
+         *  4 == 4 wire bidirectional
+         *  6 == 6 wire unidirectional (or TLL)
+         */
+        u8              pins[3];
+
+        struct platform_device *udc_device;
+        struct platform_device *ohci_device;
+        struct platform_device *otg_device;
+
+        u32 (*usb0_init)(unsigned nwires, unsigned is_device);
+        u32 (*usb1_init)(unsigned nwires);
+        u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
+};
+
+struct omap_lcd_config {
+        char panel_name[16];
+        char ctrl_name[16];
+        s16  nreset_gpio;
+        u8   data_lines;
+};
+
+struct device;
+struct fb_info;
+struct omap_backlight_config {
+        int default_intensity;
+        int (*set_power)(struct device *dev, int state);
+};
+
+struct omap_fbmem_config {
+        u32 start;
+        u32 size;
+};
+
+struct omap_pwm_led_platform_data {
+        const char *name;
+        int intensity_timer;
+        int blink_timer;
+        void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
+};
+
+struct omap_uart_config {
+        /* Bit field of UARTs present; bit 0 --> UART1 */
+        unsigned int enabled_uarts;
+};
+
+
+struct omap_flash_part_config {
+        char part_table[0];
+};
+
+struct omap_boot_reason_config {
+        char reason_str[12];
+};
+
+struct omap_version_config {
+        char component[12];
+        char version[12];
+};
+
+struct omap_board_config_entry {
+        u16 tag;
+        u16 len;
+        u8  data[0];
+};
+
+struct omap_board_config_kernel {
+        u16 tag;
+        const void *data;
+};
+
+extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
+
+#define omap_get_config(tag, type) \
+        ((const type *) __omap_get_config((tag), sizeof(type), 0))
+#define omap_get_nr_config(tag, type, nr) \
+        ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
+
+extern const void *__init omap_get_var_config(u16 tag, size_t *len);
+
+extern struct omap_board_config_kernel *omap_board_config;
+extern int omap_board_config_size;
+
+
+/* for TI reference platforms sharing the same debug card */
+extern int debug_card_init(u32 addr, unsigned gpio);
+
+/* OMAP3EVM revision */
+#if defined(CONFIG_MACH_OMAP3EVM)
+u8 get_omap3_evm_rev(void);
+#else
+#define get_omap3_evm_rev() (-EINVAL)
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
new file mode 100644
index 00000000000..387a9638991
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -0,0 +1,51 @@
+/*
+ * clkdev <-> OMAP integration
+ *
+ * Russell King <linux@arm.linux.org.uk>
+ *
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+
+#include <linux/clkdev.h>
+
+struct omap_clk {
+        u16                             cpu;
+        struct clk_lookup               lk;
+};
+
+#define CLK(dev, con, ck, cp)           \
+        {                               \
+                 .cpu = cp,             \
+                .lk = {                 \
+                        .dev_id = dev,  \
+                        .con_id = con,  \
+                        .clk = ck,      \
+                },                      \
+        }
+
+/* Platform flags for the clkdev-OMAP integration code */
+#define CK_310          (1 << 0)
+#define CK_7XX          (1 << 1)        /* 7xx, 850 */
+#define CK_1510         (1 << 2)
+#define CK_16XX         (1 << 3)        /* 16xx, 17xx, 5912 */
+#define CK_242X         (1 << 4)
+#define CK_243X         (1 << 5)        /* 243x, 253x */
+#define CK_3430ES1      (1 << 6)        /* 34xxES1 only */
+#define CK_3430ES2PLUS  (1 << 7)        /* 34xxES2, ES3, non-Sitara 35xx only */
+#define CK_3505         (1 << 8)
+#define CK_3517         (1 << 9)
+#define CK_36XX         (1 << 10)       /* 36xx/37xx-specific clocks */
+#define CK_443X         (1 << 11)
+#define CK_TI816X       (1 << 12)
+#define CK_446X         (1 << 13)
+
+
+#define CK_34XX         (CK_3430ES1 | CK_3430ES2PLUS)
+#define CK_AM35XX       (CK_3505 | CK_3517)     /* all Sitara AM35xx */
+#define CK_3XXX         (CK_34XX | CK_AM35XX | CK_36XX)
+
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h
new file mode 100644
index 00000000000..df4b9683f17
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -0,0 +1,316 @@
+/*
+ * OMAP clock: data structure definitions, function prototypes, shared macros
+ *
+ * Copyright (C) 2004-2005, 2008-2010 Nokia Corporation
+ * Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ * Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_OMAP_CLOCK_H
+#define __ARCH_ARM_OMAP_CLOCK_H
+
+#include <linux/list.h>
+
+struct module;
+struct clk;
+struct clockdomain;
+
+/**
+ * struct clkops - some clock function pointers
+ * @enable: fn ptr that enables the current clock in hardware
+ * @disable: fn ptr that enables the current clock in hardware
+ * @find_idlest: function returning the IDLEST register for the clock's IP blk
+ * @find_companion: function returning the "companion" clk reg for the clock
+ * @allow_idle: fn ptr that enables autoidle for the current clock in hardware
+ * @deny_idle: fn ptr that disables autoidle for the current clock in hardware
+ *
+ * A "companion" clk is an accompanying clock to the one being queried
+ * that must be enabled for the IP module connected to the clock to
+ * become accessible by the hardware.  Neither @find_idlest nor
+ * @find_companion should be needed; that information is IP
+ * block-specific; the hwmod code has been created to handle this, but
+ * until hwmod data is ready and drivers have been converted to use PM
+ * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
+ * @find_companion must, unfortunately, remain.
+ */
+struct clkops {
+        int                     (*enable)(struct clk *);
+        void                    (*disable)(struct clk *);
+        void                    (*find_idlest)(struct clk *, void __iomem **,
+                                               u8 *, u8 *);
+        void                    (*find_companion)(struct clk *, void __iomem **,
+                                                  u8 *);
+        void                    (*allow_idle)(struct clk *);
+        void                    (*deny_idle)(struct clk *);
+};
+
+#ifdef CONFIG_ARCH_OMAP2PLUS
+
+/* struct clksel_rate.flags possibilities */
+#define RATE_IN_242X            (1 << 0)
+#define RATE_IN_243X            (1 << 1)
+#define RATE_IN_3430ES1         (1 << 2)        /* 3430ES1 rates only */
+#define RATE_IN_3430ES2PLUS     (1 << 3)        /* 3430 ES >= 2 rates only */
+#define RATE_IN_36XX            (1 << 4)
+#define RATE_IN_4430            (1 << 5)
+#define RATE_IN_TI816X          (1 << 6)
+#define RATE_IN_4460            (1 << 7)
+
+#define RATE_IN_24XX            (RATE_IN_242X | RATE_IN_243X)
+#define RATE_IN_34XX            (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS)
+#define RATE_IN_3XXX            (RATE_IN_34XX | RATE_IN_36XX)
+#define RATE_IN_44XX            (RATE_IN_4430 | RATE_IN_4460)
+
+/* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */
+#define RATE_IN_3430ES2PLUS_36XX        (RATE_IN_3430ES2PLUS | RATE_IN_36XX)
+
+
+/**
+ * struct clksel_rate - register bitfield values corresponding to clk divisors
+ * @val: register bitfield value (shifted to bit 0)
+ * @div: clock divisor corresponding to @val
+ * @flags: (see "struct clksel_rate.flags possibilities" above)
+ *
+ * @val should match the value of a read from struct clk.clksel_reg
+ * AND'ed with struct clk.clksel_mask, shifted right to bit 0.
+ *
+ * @div is the divisor that should be applied to the parent clock's rate
+ * to produce the current clock's rate.
+ *
+ * XXX @flags probably should be replaced with an struct omap_chip.
+ */
+struct clksel_rate {
+        u32                     val;
+        u8                      div;
+        u8                      flags;
+};
+
+/**
+ * struct clksel - available parent clocks, and a pointer to their divisors
+ * @parent: struct clk * to a possible parent clock
+ * @rates: available divisors for this parent clock
+ *
+ * A struct clksel is always associated with one or more struct clks
+ * and one or more struct clksel_rates.
+ */
+struct clksel {
+        struct clk               *parent;
+        const struct clksel_rate *rates;
+};
+
+/**
+ * struct dpll_data - DPLL registers and integration data
+ * @mult_div1_reg: register containing the DPLL M and N bitfields
+ * @mult_mask: mask of the DPLL M bitfield in @mult_div1_reg
+ * @div1_mask: mask of the DPLL N bitfield in @mult_div1_reg
+ * @clk_bypass: struct clk pointer to the clock's bypass clock input
+ * @clk_ref: struct clk pointer to the clock's reference clock input
+ * @control_reg: register containing the DPLL mode bitfield
+ * @enable_mask: mask of the DPLL mode bitfield in @control_reg
+ * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate()
+ * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate()
+ * @max_multiplier: maximum valid non-bypass multiplier value (actual)
+ * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate()
+ * @min_divider: minimum valid non-bypass divider value (actual)
+ * @max_divider: maximum valid non-bypass divider value (actual)
+ * @modes: possible values of @enable_mask
+ * @autoidle_reg: register containing the DPLL autoidle mode bitfield
+ * @idlest_reg: register containing the DPLL idle status bitfield
+ * @autoidle_mask: mask of the DPLL autoidle mode bitfield in @autoidle_reg
+ * @freqsel_mask: mask of the DPLL jitter correction bitfield in @control_reg
+ * @idlest_mask: mask of the DPLL idle status bitfield in @idlest_reg
+ * @auto_recal_bit: bitshift of the driftguard enable bit in @control_reg
+ * @recal_en_bit: bitshift of the PRM_IRQENABLE_* bit for recalibration IRQs
+ * @recal_st_bit: bitshift of the PRM_IRQSTATUS_* bit for recalibration IRQs
+ * @flags: DPLL type/features (see below)
+ *
+ * Possible values for @flags:
+ * DPLL_J_TYPE: "J-type DPLL" (only some 36xx, 4xxx DPLLs)
+ *
+ * @freqsel_mask is only used on the OMAP34xx family and AM35xx.
+ *
+ * XXX Some DPLLs have multiple bypass inputs, so it's not technically
+ * correct to only have one @clk_bypass pointer.
+ *
+ * XXX The runtime-variable fields (@last_rounded_rate, @last_rounded_m,
+ * @last_rounded_n) should be separated from the runtime-fixed fields
+ * and placed into a different structure, so that the runtime-fixed data
+ * can be placed into read-only space.
+ */
+struct dpll_data {
+        void __iomem            *mult_div1_reg;
+        u32                     mult_mask;
+        u32                     div1_mask;
+        struct clk              *clk_bypass;
+        struct clk              *clk_ref;
+        void __iomem            *control_reg;
+        u32                     enable_mask;
+        unsigned long           last_rounded_rate;
+        u16                     last_rounded_m;
+        u16                     max_multiplier;
+        u8                      last_rounded_n;
+        u8                      min_divider;
+        u16                     max_divider;
+        u8                      modes;
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+        void __iomem            *autoidle_reg;
+        void __iomem            *idlest_reg;
+        u32                     autoidle_mask;
+        u32                     freqsel_mask;
+        u32                     idlest_mask;
+        u32                     dco_mask;
+        u32                     sddiv_mask;
+        u8                      auto_recal_bit;
+        u8                      recal_en_bit;
+        u8                      recal_st_bit;
+        u8                      flags;
+#  endif
+};
+
+#endif
+
+/*
+ * struct clk.flags possibilities
+ *
+ * XXX document the rest of the clock flags here
+ *
+ * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
+ *     bits share the same register.  This flag allows the
+ *     omap4_dpllmx*() code to determine which GATE_CTRL bit field
+ *     should be used.  This is a temporary solution - a better approach
+ *     would be to associate clock type-specific data with the clock,
+ *     similar to the struct dpll_data approach.
+ */
+#define ENABLE_REG_32BIT        (1 << 0)        /* Use 32-bit access */
+#define CLOCK_IDLE_CONTROL      (1 << 1)
+#define CLOCK_NO_IDLE_PARENT    (1 << 2)
+#define ENABLE_ON_INIT          (1 << 3)        /* Enable upon framework init */
+#define INVERT_ENABLE           (1 << 4)        /* 0 enables, 1 disables */
+#define CLOCK_CLKOUTX2          (1 << 5)
+
+/**
+ * struct clk - OMAP struct clk
+ * @node: list_head connecting this clock into the full clock list
+ * @ops: struct clkops * for this clock
+ * @name: the name of the clock in the hardware (used in hwmod data and debug)
+ * @parent: pointer to this clock's parent struct clk
+ * @children: list_head connecting to the child clks' @sibling list_heads
+ * @sibling: list_head connecting this clk to its parent clk's @children
+ * @rate: current clock rate
+ * @enable_reg: register to write to enable the clock (see @enable_bit)
+ * @recalc: fn ptr that returns the clock's current rate
+ * @set_rate: fn ptr that can change the clock's current rate
+ * @round_rate: fn ptr that can round the clock's current rate
+ * @init: fn ptr to do clock-specific initialization
+ * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
+ * @usecount: number of users that have requested this clock to be enabled
+ * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
+ * @flags: see "struct clk.flags possibilities" above
+ * @clksel_reg: for clksel clks, register va containing src/divisor select
+ * @clksel_mask: bitmask in @clksel_reg for the src/divisor selector
+ * @clksel: for clksel clks, pointer to struct clksel for this clock
+ * @dpll_data: for DPLLs, pointer to struct dpll_data for this clock
+ * @clkdm_name: clockdomain name that this clock is contained in
+ * @clkdm: pointer to struct clockdomain, resolved from @clkdm_name at runtime
+ * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
+ * @src_offset: bitshift for source selection bitfield (OMAP1 only)
+ *
+ * XXX @rate_offset, @src_offset should probably be removed and OMAP1
+ * clock code converted to use clksel.
+ *
+ * XXX @usecount is poorly named.  It should be "enable_count" or
+ * something similar.  "users" in the description refers to kernel
+ * code (core code or drivers) that have called clk_enable() and not
+ * yet called clk_disable(); the usecount of parent clocks is also
+ * incremented by the clock code when clk_enable() is called on child
+ * clocks and decremented by the clock code when clk_disable() is
+ * called on child clocks.
+ *
+ * XXX @clkdm, @usecount, @children, @sibling should be marked for
+ * internal use only.
+ *
+ * @children and @sibling are used to optimize parent-to-child clock
+ * tree traversals.  (child-to-parent traversals use @parent.)
+ *
+ * XXX The notion of the clock's current rate probably needs to be
+ * separated from the clock's target rate.
+ */
+struct clk {
+        struct list_head        node;
+        const struct clkops     *ops;
+        const char              *name;
+        struct clk              *parent;
+        struct list_head        children;
+        struct list_head        sibling;        /* node for children */
+        unsigned long           rate;
+        void __iomem            *enable_reg;
+        unsigned long           (*recalc)(struct clk *);
+        int                     (*set_rate)(struct clk *, unsigned long);
+        long                    (*round_rate)(struct clk *, unsigned long);
+        void                    (*init)(struct clk *);
+        u8                      enable_bit;
+        s8                      usecount;
+        u8                      fixed_div;
+        u8                      flags;
+#ifdef CONFIG_ARCH_OMAP2PLUS
+        void __iomem            *clksel_reg;
+        u32                     clksel_mask;
+        const struct clksel     *clksel;
+        struct dpll_data        *dpll_data;
+        const char              *clkdm_name;
+        struct clockdomain      *clkdm;
+#else
+        u8                      rate_offset;
+        u8                      src_offset;
+#endif
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
+        struct dentry           *dent;  /* For visible tree hierarchy */
+#endif
+};
+
+struct cpufreq_frequency_table;
+
+struct clk_functions {
+        int             (*clk_enable)(struct clk *clk);
+        void            (*clk_disable)(struct clk *clk);
+        long            (*clk_round_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_rate)(struct clk *clk, unsigned long rate);
+        int             (*clk_set_parent)(struct clk *clk, struct clk *parent);
+        void            (*clk_allow_idle)(struct clk *clk);
+        void            (*clk_deny_idle)(struct clk *clk);
+        void            (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+        void            (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+        void            (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
+};
+
+extern int mpurate;
+
+extern int clk_init(struct clk_functions *custom_clocks);
+extern void clk_preinit(struct clk *clk);
+extern int clk_register(struct clk *clk);
+extern void clk_reparent(struct clk *child, struct clk *parent);
+extern void clk_unregister(struct clk *clk);
+extern void propagate_rate(struct clk *clk);
+extern void recalculate_root_clocks(void);
+extern unsigned long followparent_recalc(struct clk *clk);
+extern void clk_enable_init_clocks(void);
+unsigned long omap_fixed_divisor_recalc(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
+#endif
+extern struct clk *omap_clk_get_by_name(const char *name);
+extern int omap_clk_enable_autoidle_all(void);
+extern int omap_clk_disable_autoidle_all(void);
+
+extern const struct clkops clkops_null;
+
+extern struct clk dummy_ck;
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h
new file mode 100644
index 00000000000..4564cc697d7
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -0,0 +1,104 @@
+/*
+ * arch/arm/plat-omap/include/mach/common.h
+ *
+ * Header for code common to all OMAP machines.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
+#define __ARCH_ARM_MACH_OMAP_COMMON_H
+
+#include <linux/delay.h>
+
+#include <plat/i2c.h>
+
+struct sys_timer;
+
+extern void omap_map_common_io(void);
+extern struct sys_timer omap1_timer;
+extern struct sys_timer omap2_timer;
+extern struct sys_timer omap3_timer;
+extern struct sys_timer omap3_secure_timer;
+extern struct sys_timer omap4_timer;
+extern bool omap_32k_timer_init(void);
+extern int __init omap_init_clocksource_32k(void);
+extern unsigned long long notrace omap_32k_sched_clock(void);
+
+extern void omap_reserve(void);
+
+/*
+ * IO bases for various OMAP processors
+ * Except the tap base, rest all the io bases
+ * listed are physical addresses.
+ */
+struct omap_globals {
+        u32             class;          /* OMAP class to detect */
+        void __iomem    *tap;           /* Control module ID code */
+        unsigned long   sdrc;           /* SDRAM Controller */
+        unsigned long   sms;            /* SDRAM Memory Scheduler */
+        unsigned long   ctrl;           /* System Control Module */
+        unsigned long   ctrl_pad;       /* PAD Control Module */
+        unsigned long   prm;            /* Power and Reset Management */
+        unsigned long   cm;             /* Clock Management */
+        unsigned long   cm2;
+};
+
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_3xxx(void);
+void omap2_set_globals_443x(void);
+void omap2_set_globals_ti816x(void);
+
+/* These get called from omap2_set_globals_xxxx(), do not call these */
+void omap2_set_globals_tap(struct omap_globals *);
+void omap2_set_globals_sdrc(struct omap_globals *);
+void omap2_set_globals_control(struct omap_globals *);
+void omap2_set_globals_prcm(struct omap_globals *);
+
+void omap3_map_io(void);
+
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)                 \
+({                                                              \
+        for (index = 0; index < timeout; index++) {             \
+                if (cond)                                       \
+                        break;                                  \
+                udelay(1);                                      \
+        }                                                       \
+})
+
+extern struct device *omap2_get_mpuss_device(void);
+extern struct device *omap2_get_iva_device(void);
+extern struct device *omap2_get_l3_device(void);
+extern struct device *omap4_get_dsp_device(void);
+
+#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/plat/dma-44xx.h b/arch/arm/plat-omap/include/plat/dma-44xx.h
new file mode 100644
index 00000000000..1f767cb2f38
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dma-44xx.h
@@ -0,0 +1,147 @@
+/*
+ * OMAP4 SDMA channel definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ * Copyright (C) 2009-2010 Nokia Corporation
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ * Paul Walmsley (paul@pwsan.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_DMA_H
+
+#define OMAP44XX_DMA_SYS_REQ0                   2
+#define OMAP44XX_DMA_SYS_REQ1                   3
+#define OMAP44XX_DMA_GPMC                       4
+#define OMAP44XX_DMA_DSS_DISPC_REQ              6
+#define OMAP44XX_DMA_SYS_REQ2                   7
+#define OMAP44XX_DMA_MCASP1_AXEVT               8
+#define OMAP44XX_DMA_ISS_REQ1                   9
+#define OMAP44XX_DMA_ISS_REQ2                   10
+#define OMAP44XX_DMA_MCASP1_AREVT               11
+#define OMAP44XX_DMA_ISS_REQ3                   12
+#define OMAP44XX_DMA_ISS_REQ4                   13
+#define OMAP44XX_DMA_DSS_RFBI_REQ               14
+#define OMAP44XX_DMA_SPI3_TX0                   15
+#define OMAP44XX_DMA_SPI3_RX0                   16
+#define OMAP44XX_DMA_MCBSP2_TX                  17
+#define OMAP44XX_DMA_MCBSP2_RX                  18
+#define OMAP44XX_DMA_MCBSP3_TX                  19
+#define OMAP44XX_DMA_MCBSP3_RX                  20
+#define OMAP44XX_DMA_C2C_SSCM_GPO0              21
+#define OMAP44XX_DMA_C2C_SSCM_GPO1              22
+#define OMAP44XX_DMA_SPI3_TX1                   23
+#define OMAP44XX_DMA_SPI3_RX1                   24
+#define OMAP44XX_DMA_I2C3_TX                    25
+#define OMAP44XX_DMA_I2C3_RX                    26
+#define OMAP44XX_DMA_I2C1_TX                    27
+#define OMAP44XX_DMA_I2C1_RX                    28
+#define OMAP44XX_DMA_I2C2_TX                    29
+#define OMAP44XX_DMA_I2C2_RX                    30
+#define OMAP44XX_DMA_MCBSP4_TX                  31
+#define OMAP44XX_DMA_MCBSP4_RX                  32
+#define OMAP44XX_DMA_MCBSP1_TX                  33
+#define OMAP44XX_DMA_MCBSP1_RX                  34
+#define OMAP44XX_DMA_SPI1_TX0                   35
+#define OMAP44XX_DMA_SPI1_RX0                   36
+#define OMAP44XX_DMA_SPI1_TX1                   37
+#define OMAP44XX_DMA_SPI1_RX1                   38
+#define OMAP44XX_DMA_SPI1_TX2                   39
+#define OMAP44XX_DMA_SPI1_RX2                   40
+#define OMAP44XX_DMA_SPI1_TX3                   41
+#define OMAP44XX_DMA_SPI1_RX3                   42
+#define OMAP44XX_DMA_SPI2_TX0                   43
+#define OMAP44XX_DMA_SPI2_RX0                   44
+#define OMAP44XX_DMA_SPI2_TX1                   45
+#define OMAP44XX_DMA_SPI2_RX1                   46
+#define OMAP44XX_DMA_MMC2_TX                    47
+#define OMAP44XX_DMA_MMC2_RX                    48
+#define OMAP44XX_DMA_UART1_TX                   49
+#define OMAP44XX_DMA_UART1_RX                   50
+#define OMAP44XX_DMA_UART2_TX                   51
+#define OMAP44XX_DMA_UART2_RX                   52
+#define OMAP44XX_DMA_UART3_TX                   53
+#define OMAP44XX_DMA_UART3_RX                   54
+#define OMAP44XX_DMA_UART4_TX                   55
+#define OMAP44XX_DMA_UART4_RX                   56
+#define OMAP44XX_DMA_MMC4_TX                    57
+#define OMAP44XX_DMA_MMC4_RX                    58
+#define OMAP44XX_DMA_MMC5_TX                    59
+#define OMAP44XX_DMA_MMC5_RX                    60
+#define OMAP44XX_DMA_MMC1_TX                    61
+#define OMAP44XX_DMA_MMC1_RX                    62
+#define OMAP44XX_DMA_SYS_REQ3                   64
+#define OMAP44XX_DMA_MCPDM_UP                   65
+#define OMAP44XX_DMA_MCPDM_DL                   66
+#define OMAP44XX_DMA_DMIC_REQ                   67
+#define OMAP44XX_DMA_C2C_SSCM_GPO2              68
+#define OMAP44XX_DMA_C2C_SSCM_GPO3              69
+#define OMAP44XX_DMA_SPI4_TX0                   70
+#define OMAP44XX_DMA_SPI4_RX0                   71
+#define OMAP44XX_DMA_DSS_DSI1_REQ0              72
+#define OMAP44XX_DMA_DSS_DSI1_REQ1              73
+#define OMAP44XX_DMA_DSS_DSI1_REQ2              74
+#define OMAP44XX_DMA_DSS_DSI1_REQ3              75
+#define OMAP44XX_DMA_DSS_HDMI_REQ               76
+#define OMAP44XX_DMA_MMC3_TX                    77
+#define OMAP44XX_DMA_MMC3_RX                    78
+#define OMAP44XX_DMA_USIM_TX                    79
+#define OMAP44XX_DMA_USIM_RX                    80
+#define OMAP44XX_DMA_DSS_DSI2_REQ0              81
+#define OMAP44XX_DMA_DSS_DSI2_REQ1              82
+#define OMAP44XX_DMA_DSS_DSI2_REQ2              83
+#define OMAP44XX_DMA_DSS_DSI2_REQ3              84
+#define OMAP44XX_DMA_SLIMBUS1_TX0               85
+#define OMAP44XX_DMA_SLIMBUS1_TX1               86
+#define OMAP44XX_DMA_SLIMBUS1_TX2               87
+#define OMAP44XX_DMA_SLIMBUS1_TX3               88
+#define OMAP44XX_DMA_SLIMBUS1_RX0               89
+#define OMAP44XX_DMA_SLIMBUS1_RX1               90
+#define OMAP44XX_DMA_SLIMBUS1_RX2               91
+#define OMAP44XX_DMA_SLIMBUS1_RX3               92
+#define OMAP44XX_DMA_SLIMBUS2_TX0               93
+#define OMAP44XX_DMA_SLIMBUS2_TX1               94
+#define OMAP44XX_DMA_SLIMBUS2_TX2               95
+#define OMAP44XX_DMA_SLIMBUS2_TX3               96
+#define OMAP44XX_DMA_SLIMBUS2_RX0               97
+#define OMAP44XX_DMA_SLIMBUS2_RX1               98
+#define OMAP44XX_DMA_SLIMBUS2_RX2               99
+#define OMAP44XX_DMA_SLIMBUS2_RX3               100
+#define OMAP44XX_DMA_ABE_REQ_0                  101
+#define OMAP44XX_DMA_ABE_REQ_1                  102
+#define OMAP44XX_DMA_ABE_REQ_2                  103
+#define OMAP44XX_DMA_ABE_REQ_3                  104
+#define OMAP44XX_DMA_ABE_REQ_4                  105
+#define OMAP44XX_DMA_ABE_REQ_5                  106
+#define OMAP44XX_DMA_ABE_REQ_6                  107
+#define OMAP44XX_DMA_ABE_REQ_7                  108
+#define OMAP44XX_DMA_AES1_P_CTX_IN_REQ          109
+#define OMAP44XX_DMA_AES1_P_DATA_IN_REQ         110
+#define OMAP44XX_DMA_AES1_P_DATA_OUT_REQ        111
+#define OMAP44XX_DMA_AES2_P_CTX_IN_REQ          112
+#define OMAP44XX_DMA_AES2_P_DATA_IN_REQ         113
+#define OMAP44XX_DMA_AES2_P_DATA_OUT_REQ        114
+#define OMAP44XX_DMA_DES_P_CTX_IN_REQ           115
+#define OMAP44XX_DMA_DES_P_DATA_IN_REQ          116
+#define OMAP44XX_DMA_DES_P_DATA_OUT_REQ         117
+#define OMAP44XX_DMA_SHA2_CTXIN_P               118
+#define OMAP44XX_DMA_SHA2_DIN_P                 119
+#define OMAP44XX_DMA_SHA2_CTXOUT_P              120
+#define OMAP44XX_DMA_AES1_P_CONTEXT_OUT_REQ     121
+#define OMAP44XX_DMA_AES2_P_CONTEXT_OUT_REQ     122
+#define OMAP44XX_DMA_I2C4_TX                    124
+#define OMAP44XX_DMA_I2C4_RX                    125
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h
new file mode 100644
index 00000000000..dc562a5c0a8
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -0,0 +1,538 @@
+/*
+ *  arch/arm/plat-omap/include/mach/dma.h
+ *
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+#include <linux/platform_device.h>
+
+/*
+ * TODO: These dma channel defines should go away once all
+ * the omap drivers hwmod adapted.
+ */
+
+/* Move omap4 specific defines to dma-44xx.h */
+#include "dma-44xx.h"
+
+/* DMA channels for omap1 */
+#define OMAP_DMA_NO_DEVICE              0
+#define OMAP_DMA_MCSI1_TX               1
+#define OMAP_DMA_MCSI1_RX               2
+#define OMAP_DMA_I2C_RX                 3
+#define OMAP_DMA_I2C_TX                 4
+#define OMAP_DMA_EXT_NDMA_REQ           5
+#define OMAP_DMA_EXT_NDMA_REQ2          6
+#define OMAP_DMA_UWIRE_TX               7
+#define OMAP_DMA_MCBSP1_TX              8
+#define OMAP_DMA_MCBSP1_RX              9
+#define OMAP_DMA_MCBSP3_TX              10
+#define OMAP_DMA_MCBSP3_RX              11
+#define OMAP_DMA_UART1_TX               12
+#define OMAP_DMA_UART1_RX               13
+#define OMAP_DMA_UART2_TX               14
+#define OMAP_DMA_UART2_RX               15
+#define OMAP_DMA_MCBSP2_TX              16
+#define OMAP_DMA_MCBSP2_RX              17
+#define OMAP_DMA_UART3_TX               18
+#define OMAP_DMA_UART3_RX               19
+#define OMAP_DMA_CAMERA_IF_RX           20
+#define OMAP_DMA_MMC_TX                 21
+#define OMAP_DMA_MMC_RX                 22
+#define OMAP_DMA_NAND                   23
+#define OMAP_DMA_IRQ_LCD_LINE           24
+#define OMAP_DMA_MEMORY_STICK           25
+#define OMAP_DMA_USB_W2FC_RX0           26
+#define OMAP_DMA_USB_W2FC_RX1           27
+#define OMAP_DMA_USB_W2FC_RX2           28
+#define OMAP_DMA_USB_W2FC_TX0           29
+#define OMAP_DMA_USB_W2FC_TX1           30
+#define OMAP_DMA_USB_W2FC_TX2           31
+
+/* These are only for 1610 */
+#define OMAP_DMA_CRYPTO_DES_IN          32
+#define OMAP_DMA_SPI_TX                 33
+#define OMAP_DMA_SPI_RX                 34
+#define OMAP_DMA_CRYPTO_HASH            35
+#define OMAP_DMA_CCP_ATTN               36
+#define OMAP_DMA_CCP_FIFO_NOT_EMPTY     37
+#define OMAP_DMA_CMT_APE_TX_CHAN_0      38
+#define OMAP_DMA_CMT_APE_RV_CHAN_0      39
+#define OMAP_DMA_CMT_APE_TX_CHAN_1      40
+#define OMAP_DMA_CMT_APE_RV_CHAN_1      41
+#define OMAP_DMA_CMT_APE_TX_CHAN_2      42
+#define OMAP_DMA_CMT_APE_RV_CHAN_2      43
+#define OMAP_DMA_CMT_APE_TX_CHAN_3      44
+#define OMAP_DMA_CMT_APE_RV_CHAN_3      45
+#define OMAP_DMA_CMT_APE_TX_CHAN_4      46
+#define OMAP_DMA_CMT_APE_RV_CHAN_4      47
+#define OMAP_DMA_CMT_APE_TX_CHAN_5      48
+#define OMAP_DMA_CMT_APE_RV_CHAN_5      49
+#define OMAP_DMA_CMT_APE_TX_CHAN_6      50
+#define OMAP_DMA_CMT_APE_RV_CHAN_6      51
+#define OMAP_DMA_CMT_APE_TX_CHAN_7      52
+#define OMAP_DMA_CMT_APE_RV_CHAN_7      53
+#define OMAP_DMA_MMC2_TX                54
+#define OMAP_DMA_MMC2_RX                55
+#define OMAP_DMA_CRYPTO_DES_OUT         56
+
+/* DMA channels for 24xx */
+#define OMAP24XX_DMA_NO_DEVICE          0
+#define OMAP24XX_DMA_XTI_DMA            1       /* S_DMA_0 */
+#define OMAP24XX_DMA_EXT_DMAREQ0        2       /* S_DMA_1 */
+#define OMAP24XX_DMA_EXT_DMAREQ1        3       /* S_DMA_2 */
+#define OMAP24XX_DMA_GPMC               4       /* S_DMA_3 */
+#define OMAP24XX_DMA_GFX                5       /* S_DMA_4 */
+#define OMAP24XX_DMA_DSS                6       /* S_DMA_5 */
+#define OMAP242X_DMA_VLYNQ_TX           7       /* S_DMA_6 */
+#define OMAP24XX_DMA_EXT_DMAREQ2        7       /* S_DMA_6 */
+#define OMAP24XX_DMA_CWT                8       /* S_DMA_7 */
+#define OMAP24XX_DMA_AES_TX             9       /* S_DMA_8 */
+#define OMAP24XX_DMA_AES_RX             10      /* S_DMA_9 */
+#define OMAP24XX_DMA_DES_TX             11      /* S_DMA_10 */
+#define OMAP24XX_DMA_DES_RX             12      /* S_DMA_11 */
+#define OMAP24XX_DMA_SHA1MD5_RX         13      /* S_DMA_12 */
+#define OMAP34XX_DMA_SHA2MD5_RX         13      /* S_DMA_12 */
+#define OMAP242X_DMA_EXT_DMAREQ2        14      /* S_DMA_13 */
+#define OMAP242X_DMA_EXT_DMAREQ3        15      /* S_DMA_14 */
+#define OMAP242X_DMA_EXT_DMAREQ4        16      /* S_DMA_15 */
+#define OMAP242X_DMA_EAC_AC_RD          17      /* S_DMA_16 */
+#define OMAP242X_DMA_EAC_AC_WR          18      /* S_DMA_17 */
+#define OMAP242X_DMA_EAC_MD_UL_RD       19      /* S_DMA_18 */
+#define OMAP242X_DMA_EAC_MD_UL_WR       20      /* S_DMA_19 */
+#define OMAP242X_DMA_EAC_MD_DL_RD       21      /* S_DMA_20 */
+#define OMAP242X_DMA_EAC_MD_DL_WR       22      /* S_DMA_21 */
+#define OMAP242X_DMA_EAC_BT_UL_RD       23      /* S_DMA_22 */
+#define OMAP242X_DMA_EAC_BT_UL_WR       24      /* S_DMA_23 */
+#define OMAP242X_DMA_EAC_BT_DL_RD       25      /* S_DMA_24 */
+#define OMAP242X_DMA_EAC_BT_DL_WR       26      /* S_DMA_25 */
+#define OMAP243X_DMA_EXT_DMAREQ3        14      /* S_DMA_13 */
+#define OMAP24XX_DMA_SPI3_TX0           15      /* S_DMA_14 */
+#define OMAP24XX_DMA_SPI3_RX0           16      /* S_DMA_15 */
+#define OMAP24XX_DMA_MCBSP3_TX          17      /* S_DMA_16 */
+#define OMAP24XX_DMA_MCBSP3_RX          18      /* S_DMA_17 */
+#define OMAP24XX_DMA_MCBSP4_TX          19      /* S_DMA_18 */
+#define OMAP24XX_DMA_MCBSP4_RX          20      /* S_DMA_19 */
+#define OMAP24XX_DMA_MCBSP5_TX          21      /* S_DMA_20 */
+#define OMAP24XX_DMA_MCBSP5_RX          22      /* S_DMA_21 */
+#define OMAP24XX_DMA_SPI3_TX1           23      /* S_DMA_22 */
+#define OMAP24XX_DMA_SPI3_RX1           24      /* S_DMA_23 */
+#define OMAP243X_DMA_EXT_DMAREQ4        25      /* S_DMA_24 */
+#define OMAP243X_DMA_EXT_DMAREQ5        26      /* S_DMA_25 */
+#define OMAP34XX_DMA_I2C3_TX            25      /* S_DMA_24 */
+#define OMAP34XX_DMA_I2C3_RX            26      /* S_DMA_25 */
+#define OMAP24XX_DMA_I2C1_TX            27      /* S_DMA_26 */
+#define OMAP24XX_DMA_I2C1_RX            28      /* S_DMA_27 */
+#define OMAP24XX_DMA_I2C2_TX            29      /* S_DMA_28 */
+#define OMAP24XX_DMA_I2C2_RX            30      /* S_DMA_29 */
+#define OMAP24XX_DMA_MCBSP1_TX          31      /* S_DMA_30 */
+#define OMAP24XX_DMA_MCBSP1_RX          32      /* S_DMA_31 */
+#define OMAP24XX_DMA_MCBSP2_TX          33      /* S_DMA_32 */
+#define OMAP24XX_DMA_MCBSP2_RX          34      /* S_DMA_33 */
+#define OMAP24XX_DMA_SPI1_TX0           35      /* S_DMA_34 */
+#define OMAP24XX_DMA_SPI1_RX0           36      /* S_DMA_35 */
+#define OMAP24XX_DMA_SPI1_TX1           37      /* S_DMA_36 */
+#define OMAP24XX_DMA_SPI1_RX1           38      /* S_DMA_37 */
+#define OMAP24XX_DMA_SPI1_TX2           39      /* S_DMA_38 */
+#define OMAP24XX_DMA_SPI1_RX2           40      /* S_DMA_39 */
+#define OMAP24XX_DMA_SPI1_TX3           41      /* S_DMA_40 */
+#define OMAP24XX_DMA_SPI1_RX3           42      /* S_DMA_41 */
+#define OMAP24XX_DMA_SPI2_TX0           43      /* S_DMA_42 */
+#define OMAP24XX_DMA_SPI2_RX0           44      /* S_DMA_43 */
+#define OMAP24XX_DMA_SPI2_TX1           45      /* S_DMA_44 */
+#define OMAP24XX_DMA_SPI2_RX1           46      /* S_DMA_45 */
+#define OMAP24XX_DMA_MMC2_TX            47      /* S_DMA_46 */
+#define OMAP24XX_DMA_MMC2_RX            48      /* S_DMA_47 */
+#define OMAP24XX_DMA_UART1_TX           49      /* S_DMA_48 */
+#define OMAP24XX_DMA_UART1_RX           50      /* S_DMA_49 */
+#define OMAP24XX_DMA_UART2_TX           51      /* S_DMA_50 */
+#define OMAP24XX_DMA_UART2_RX           52      /* S_DMA_51 */
+#define OMAP24XX_DMA_UART3_TX           53      /* S_DMA_52 */
+#define OMAP24XX_DMA_UART3_RX           54      /* S_DMA_53 */
+#define OMAP24XX_DMA_USB_W2FC_TX0       55      /* S_DMA_54 */
+#define OMAP24XX_DMA_USB_W2FC_RX0       56      /* S_DMA_55 */
+#define OMAP24XX_DMA_USB_W2FC_TX1       57      /* S_DMA_56 */
+#define OMAP24XX_DMA_USB_W2FC_RX1       58      /* S_DMA_57 */
+#define OMAP24XX_DMA_USB_W2FC_TX2       59      /* S_DMA_58 */
+#define OMAP24XX_DMA_USB_W2FC_RX2       60      /* S_DMA_59 */
+#define OMAP24XX_DMA_MMC1_TX            61      /* S_DMA_60 */
+#define OMAP24XX_DMA_MMC1_RX            62      /* S_DMA_61 */
+#define OMAP24XX_DMA_MS                 63      /* S_DMA_62 */
+#define OMAP242X_DMA_EXT_DMAREQ5        64      /* S_DMA_63 */
+#define OMAP243X_DMA_EXT_DMAREQ6        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_EXT_DMAREQ3        64      /* S_DMA_63 */
+#define OMAP34XX_DMA_AES2_TX            65      /* S_DMA_64 */
+#define OMAP34XX_DMA_AES2_RX            66      /* S_DMA_65 */
+#define OMAP34XX_DMA_DES2_TX            67      /* S_DMA_66 */
+#define OMAP34XX_DMA_DES2_RX            68      /* S_DMA_67 */
+#define OMAP34XX_DMA_SHA1MD5_RX         69      /* S_DMA_68 */
+#define OMAP34XX_DMA_SPI4_TX0           70      /* S_DMA_69 */
+#define OMAP34XX_DMA_SPI4_RX0           71      /* S_DMA_70 */
+#define OMAP34XX_DSS_DMA0               72      /* S_DMA_71 */
+#define OMAP34XX_DSS_DMA1               73      /* S_DMA_72 */
+#define OMAP34XX_DSS_DMA2               74      /* S_DMA_73 */
+#define OMAP34XX_DSS_DMA3               75      /* S_DMA_74 */
+#define OMAP34XX_DMA_MMC3_TX            77      /* S_DMA_76 */
+#define OMAP34XX_DMA_MMC3_RX            78      /* S_DMA_77 */
+#define OMAP34XX_DMA_USIM_TX            79      /* S_DMA_78 */
+#define OMAP34XX_DMA_USIM_RX            80      /* S_DMA_79 */
+
+#define OMAP36XX_DMA_UART4_TX           81      /* S_DMA_80 */
+#define OMAP36XX_DMA_UART4_RX           82      /* S_DMA_81 */
+
+/* Only for AM35xx */
+#define AM35XX_DMA_UART4_TX             54
+#define AM35XX_DMA_UART4_RX             55
+
+/*----------------------------------------------------------------------------*/
+
+#define OMAP1_DMA_TOUT_IRQ              (1 << 0)
+#define OMAP_DMA_DROP_IRQ               (1 << 1)
+#define OMAP_DMA_HALF_IRQ               (1 << 2)
+#define OMAP_DMA_FRAME_IRQ              (1 << 3)
+#define OMAP_DMA_LAST_IRQ               (1 << 4)
+#define OMAP_DMA_BLOCK_IRQ              (1 << 5)
+#define OMAP1_DMA_SYNC_IRQ              (1 << 6)
+#define OMAP2_DMA_PKT_IRQ               (1 << 7)
+#define OMAP2_DMA_TRANS_ERR_IRQ         (1 << 8)
+#define OMAP2_DMA_SECURE_ERR_IRQ        (1 << 9)
+#define OMAP2_DMA_SUPERVISOR_ERR_IRQ    (1 << 10)
+#define OMAP2_DMA_MISALIGNED_ERR_IRQ    (1 << 11)
+
+#define OMAP_DMA_CCR_EN                 (1 << 7)
+#define OMAP_DMA_CCR_RD_ACTIVE          (1 << 9)
+#define OMAP_DMA_CCR_WR_ACTIVE          (1 << 10)
+#define OMAP_DMA_CCR_SEL_SRC_DST_SYNC   (1 << 24)
+#define OMAP_DMA_CCR_BUFFERING_DISABLE  (1 << 25)
+
+#define OMAP_DMA_DATA_TYPE_S8           0x00
+#define OMAP_DMA_DATA_TYPE_S16          0x01
+#define OMAP_DMA_DATA_TYPE_S32          0x02
+
+#define OMAP_DMA_SYNC_ELEMENT           0x00
+#define OMAP_DMA_SYNC_FRAME             0x01
+#define OMAP_DMA_SYNC_BLOCK             0x02
+#define OMAP_DMA_SYNC_PACKET            0x03
+
+#define OMAP_DMA_DST_SYNC_PREFETCH      0x02
+#define OMAP_DMA_SRC_SYNC               0x01
+#define OMAP_DMA_DST_SYNC               0x00
+
+#define OMAP_DMA_PORT_EMIFF             0x00
+#define OMAP_DMA_PORT_EMIFS             0x01
+#define OMAP_DMA_PORT_OCP_T1            0x02
+#define OMAP_DMA_PORT_TIPB              0x03
+#define OMAP_DMA_PORT_OCP_T2            0x04
+#define OMAP_DMA_PORT_MPUI              0x05
+
+#define OMAP_DMA_AMODE_CONSTANT         0x00
+#define OMAP_DMA_AMODE_POST_INC         0x01
+#define OMAP_DMA_AMODE_SINGLE_IDX       0x02
+#define OMAP_DMA_AMODE_DOUBLE_IDX       0x03
+
+#define DMA_DEFAULT_FIFO_DEPTH          0x10
+#define DMA_DEFAULT_ARB_RATE            0x01
+/* Pass THREAD_RESERVE ORed with THREAD_FIFO for tparams */
+#define DMA_THREAD_RESERVE_NORM         (0x00 << 12) /* Def */
+#define DMA_THREAD_RESERVE_ONET         (0x01 << 12)
+#define DMA_THREAD_RESERVE_TWOT         (0x02 << 12)
+#define DMA_THREAD_RESERVE_THREET       (0x03 << 12)
+#define DMA_THREAD_FIFO_NONE            (0x00 << 14) /* Def */
+#define DMA_THREAD_FIFO_75              (0x01 << 14)
+#define DMA_THREAD_FIFO_25              (0x02 << 14)
+#define DMA_THREAD_FIFO_50              (0x03 << 14)
+
+/* DMA4_OCP_SYSCONFIG bits */
+#define DMA_SYSCONFIG_MIDLEMODE_MASK            (3 << 12)
+#define DMA_SYSCONFIG_CLOCKACTIVITY_MASK        (3 << 8)
+#define DMA_SYSCONFIG_EMUFREE                   (1 << 5)
+#define DMA_SYSCONFIG_SIDLEMODE_MASK            (3 << 3)
+#define DMA_SYSCONFIG_SOFTRESET                 (1 << 2)
+#define DMA_SYSCONFIG_AUTOIDLE                  (1 << 0)
+
+#define DMA_SYSCONFIG_MIDLEMODE(n)              ((n) << 12)
+#define DMA_SYSCONFIG_SIDLEMODE(n)              ((n) << 3)
+
+#define DMA_IDLEMODE_SMARTIDLE                  0x2
+#define DMA_IDLEMODE_NO_IDLE                    0x1
+#define DMA_IDLEMODE_FORCE_IDLE                 0x0
+
+/* Chaining modes*/
+#ifndef CONFIG_ARCH_OMAP1
+#define OMAP_DMA_STATIC_CHAIN           0x1
+#define OMAP_DMA_DYNAMIC_CHAIN          0x2
+#define OMAP_DMA_CHAIN_ACTIVE           0x1
+#define OMAP_DMA_CHAIN_INACTIVE         0x0
+#endif
+
+#define DMA_CH_PRIO_HIGH                0x1
+#define DMA_CH_PRIO_LOW                 0x0 /* Def */
+
+/* Errata handling */
+#define IS_DMA_ERRATA(id)               (errata & (id))
+#define SET_DMA_ERRATA(id)              (errata |= (id))
+
+#define DMA_ERRATA_IFRAME_BUFFERING     BIT(0x0)
+#define DMA_ERRATA_PARALLEL_CHANNELS    BIT(0x1)
+#define DMA_ERRATA_i378                 BIT(0x2)
+#define DMA_ERRATA_i541                 BIT(0x3)
+#define DMA_ERRATA_i88                  BIT(0x4)
+#define DMA_ERRATA_3_3                  BIT(0x5)
+#define DMA_ROMCODE_BUG                 BIT(0x6)
+
+/* Attributes for OMAP DMA Contrller */
+#define DMA_LINKED_LCH                  BIT(0x0)
+#define GLOBAL_PRIORITY                 BIT(0x1)
+#define RESERVE_CHANNEL                 BIT(0x2)
+#define IS_CSSA_32                      BIT(0x3)
+#define IS_CDSA_32                      BIT(0x4)
+#define IS_RW_PRIORITY                  BIT(0x5)
+#define ENABLE_1510_MODE                BIT(0x6)
+#define SRC_PORT                        BIT(0x7)
+#define DST_PORT                        BIT(0x8)
+#define SRC_INDEX                       BIT(0x9)
+#define DST_INDEX                       BIT(0xA)
+#define IS_BURST_ONLY4                  BIT(0xB)
+#define CLEAR_CSR_ON_READ               BIT(0xC)
+#define IS_WORD_16                      BIT(0xD)
+
+enum omap_reg_offsets {
+
+GCR,            GSCR,           GRST1,          HW_ID,
+PCH2_ID,        PCH0_ID,        PCH1_ID,        PCHG_ID,
+PCHD_ID,        CAPS_0,         CAPS_1,         CAPS_2,
+CAPS_3,         CAPS_4,         PCH2_SR,        PCH0_SR,
+PCH1_SR,        PCHD_SR,        REVISION,       IRQSTATUS_L0,
+IRQSTATUS_L1,   IRQSTATUS_L2,   IRQSTATUS_L3,   IRQENABLE_L0,
+IRQENABLE_L1,   IRQENABLE_L2,   IRQENABLE_L3,   SYSSTATUS,
+OCP_SYSCONFIG,
+
+/* omap1+ specific */
+CPC, CCR2, LCH_CTRL,
+
+/* Common registers for all omap's */
+CSDP,           CCR,            CICR,           CSR,
+CEN,            CFN,            CSFI,           CSEI,
+CSAC,           CDAC,           CDEI,
+CDFI,           CLNK_CTRL,
+
+/* Channel specific registers */
+CSSA,           CDSA,           COLOR,
+CCEN,           CCFN,
+
+/* omap3630 and omap4 specific */
+CDP,            CNDP,           CCDN,
+
+};
+
+enum omap_dma_burst_mode {
+        OMAP_DMA_DATA_BURST_DIS = 0,
+        OMAP_DMA_DATA_BURST_4,
+        OMAP_DMA_DATA_BURST_8,
+        OMAP_DMA_DATA_BURST_16,
+};
+
+enum end_type {
+        OMAP_DMA_LITTLE_ENDIAN = 0,
+        OMAP_DMA_BIG_ENDIAN
+};
+
+enum omap_dma_color_mode {
+        OMAP_DMA_COLOR_DIS = 0,
+        OMAP_DMA_CONSTANT_FILL,
+        OMAP_DMA_TRANSPARENT_COPY
+};
+
+enum omap_dma_write_mode {
+        OMAP_DMA_WRITE_NON_POSTED = 0,
+        OMAP_DMA_WRITE_POSTED,
+        OMAP_DMA_WRITE_LAST_NON_POSTED
+};
+
+enum omap_dma_channel_mode {
+        OMAP_DMA_LCH_2D = 0,
+        OMAP_DMA_LCH_G,
+        OMAP_DMA_LCH_P,
+        OMAP_DMA_LCH_PD
+};
+
+struct omap_dma_channel_params {
+        int data_type;          /* data type 8,16,32 */
+        int elem_count;         /* number of elements in a frame */
+        int frame_count;        /* number of frames in a element */
+
+        int src_port;           /* Only on OMAP1 REVISIT: Is this needed? */
+        int src_amode;          /* constant, post increment, indexed,
+                                        double indexed */
+        unsigned long src_start;        /* source address : physical */
+        int src_ei;             /* source element index */
+        int src_fi;             /* source frame index */
+
+        int dst_port;           /* Only on OMAP1 REVISIT: Is this needed? */
+        int dst_amode;          /* constant, post increment, indexed,
+                                        double indexed */
+        unsigned long dst_start;        /* source address : physical */
+        int dst_ei;             /* source element index */
+        int dst_fi;             /* source frame index */
+
+        int trigger;            /* trigger attached if the channel is
+                                        synchronized */
+        int sync_mode;          /* sycn on element, frame , block or packet */
+        int src_or_dst_synch;   /* source synch(1) or destination synch(0) */
+
+        int ie;                 /* interrupt enabled */
+
+        unsigned char read_prio;/* read priority */
+        unsigned char write_prio;/* write priority */
+
+#ifndef CONFIG_ARCH_OMAP1
+        enum omap_dma_burst_mode burst_mode; /* Burst mode 4/8/16 words */
+#endif
+};
+
+struct omap_dma_lch {
+        int next_lch;
+        int dev_id;
+        u16 saved_csr;
+        u16 enabled_irqs;
+        const char *dev_name;
+        void (*callback)(int lch, u16 ch_status, void *data);
+        void *data;
+        long flags;
+        /* required for Dynamic chaining */
+        int prev_linked_ch;
+        int next_linked_ch;
+        int state;
+        int chain_id;
+        int status;
+};
+
+struct omap_dma_dev_attr {
+        u32 dev_caps;
+        u16 lch_count;
+        u16 chan_count;
+        struct omap_dma_lch *chan;
+};
+
+/* System DMA platform data structure */
+struct omap_system_dma_plat_info {
+        struct omap_dma_dev_attr *dma_attr;
+        u32 errata;
+        void (*disable_irq_lch)(int lch);
+        void (*show_dma_caps)(void);
+        void (*clear_lch_regs)(int lch);
+        void (*clear_dma)(int lch);
+        void (*dma_write)(u32 val, int reg, int lch);
+        u32 (*dma_read)(int reg, int lch);
+};
+
+extern void omap_set_dma_priority(int lch, int dst_port, int priority);
+extern int omap_request_dma(int dev_id, const char *dev_name,
+                        void (*callback)(int lch, u16 ch_status, void *data),
+                        void *data, int *dma_ch);
+extern void omap_enable_dma_irq(int ch, u16 irq_bits);
+extern void omap_disable_dma_irq(int ch, u16 irq_bits);
+extern void omap_free_dma(int ch);
+extern void omap_start_dma(int lch);
+extern void omap_stop_dma(int lch);
+extern void omap_set_dma_transfer_params(int lch, int data_type,
+                                         int elem_count, int frame_count,
+                                         int sync_mode,
+                                         int dma_trigger, int src_or_dst_synch);
+extern void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode,
+                                    u32 color);
+extern void omap_set_dma_write_mode(int lch, enum omap_dma_write_mode mode);
+extern void omap_set_dma_channel_mode(int lch, enum omap_dma_channel_mode mode);
+
+extern void omap_set_dma_src_params(int lch, int src_port, int src_amode,
+                                    unsigned long src_start,
+                                    int src_ei, int src_fi);
+extern void omap_set_dma_src_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_src_data_pack(int lch, int enable);
+extern void omap_set_dma_src_burst_mode(int lch,
+                                        enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_dest_params(int lch, int dest_port, int dest_amode,
+                                     unsigned long dest_start,
+                                     int dst_ei, int dst_fi);
+extern void omap_set_dma_dest_index(int lch, int eidx, int fidx);
+extern void omap_set_dma_dest_data_pack(int lch, int enable);
+extern void omap_set_dma_dest_burst_mode(int lch,
+                                         enum omap_dma_burst_mode burst_mode);
+
+extern void omap_set_dma_params(int lch,
+                                struct omap_dma_channel_params *params);
+
+extern void omap_dma_link_lch(int lch_head, int lch_queue);
+extern void omap_dma_unlink_lch(int lch_head, int lch_queue);
+
+extern int omap_set_dma_callback(int lch,
+                        void (*callback)(int lch, u16 ch_status, void *data),
+                        void *data);
+extern dma_addr_t omap_get_dma_src_pos(int lch);
+extern dma_addr_t omap_get_dma_dst_pos(int lch);
+extern void omap_clear_dma(int lch);
+extern int omap_get_dma_active_status(int lch);
+extern int omap_dma_running(void);
+extern void omap_dma_set_global_params(int arb_rate, int max_fifo_depth,
+                                       int tparams);
+extern int omap_dma_set_prio_lch(int lch, unsigned char read_prio,
+                                 unsigned char write_prio);
+extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
+extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
+extern int omap_get_dma_index(int lch, int *ei, int *fi);
+
+void omap_dma_global_context_save(void);
+void omap_dma_global_context_restore(void);
+
+extern void omap_dma_disable_irq(int lch);
+
+/* Chaining APIs */
+#ifndef CONFIG_ARCH_OMAP1
+extern int omap_request_dma_chain(int dev_id, const char *dev_name,
+                                  void (*callback) (int lch, u16 ch_status,
+                                                    void *data),
+                                  int *chain_id, int no_of_chans,
+                                  int chain_mode,
+                                  struct omap_dma_channel_params params);
+extern int omap_free_dma_chain(int chain_id);
+extern int omap_dma_chain_a_transfer(int chain_id, int src_start,
+                                     int dest_start, int elem_count,
+                                     int frame_count, void *callbk_data);
+extern int omap_start_dma_chain_transfers(int chain_id);
+extern int omap_stop_dma_chain_transfers(int chain_id);
+extern int omap_get_dma_chain_index(int chain_id, int *ei, int *fi);
+extern int omap_get_dma_chain_dst_pos(int chain_id);
+extern int omap_get_dma_chain_src_pos(int chain_id);
+
+extern int omap_modify_dma_chain_params(int chain_id,
+                                        struct omap_dma_channel_params params);
+extern int omap_dma_chain_status(int chain_id);
+#endif
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
+#include <mach/lcd_dma.h>
+#else
+static inline int omap_lcd_dma_running(void)
+{
+        return 0;
+}
+#endif
+
+#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/plat/dsp.h b/arch/arm/plat-omap/include/plat/dsp.h
new file mode 100644
index 00000000000..9c604b390f9
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/dsp.h
@@ -0,0 +1,31 @@
+#ifndef __OMAP_DSP_H__
+#define __OMAP_DSP_H__
+
+#include <linux/types.h>
+
+struct omap_dsp_platform_data {
+        void (*dsp_set_min_opp) (u8 opp_id);
+        u8 (*dsp_get_opp) (void);
+        void (*cpu_set_freq) (unsigned long f);
+        unsigned long (*cpu_get_freq) (void);
+        unsigned long mpu_speed[6];
+
+        /* functions to write and read PRCM registers */
+        void (*dsp_prm_write)(u32, s16 , u16);
+        u32 (*dsp_prm_read)(s16 , u16);
+        u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16);
+        void (*dsp_cm_write)(u32, s16 , u16);
+        u32 (*dsp_cm_read)(s16 , u16);
+        u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16);
+
+        phys_addr_t phys_mempool_base;
+        phys_addr_t phys_mempool_size;
+};
+
+#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE)
+extern void omap_dsp_reserve_sdram_memblock(void);
+#else
+static inline void omap_dsp_reserve_sdram_memblock(void) { }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/flash.h b/arch/arm/plat-omap/include/plat/flash.h
new file mode 100644
index 00000000000..0d88499b79e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/flash.h
@@ -0,0 +1,17 @@
+/*
+ * Flash support for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP_FLASH_H
+#define __OMAP_FLASH_H
+
+#include <linux/mtd/map.h>
+
+struct platform_device;
+extern void omap1_set_vpp(struct platform_device *pdev, int enable);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
new file mode 100644
index 00000000000..bd3c6324ae1
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/fpga.h
@@ -0,0 +1,193 @@
+/*
+ * arch/arm/plat-omap/include/mach/fpga.h
+ *
+ * Interrupt handler for OMAP-1510 FPGA
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Copyright (C) 2002 MontaVista Software, Inc.
+ *
+ * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
+ * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_FPGA_H
+#define __ASM_ARCH_OMAP_FPGA_H
+
+extern void omap1510_fpga_init_irq(void);
+
+#define fpga_read(reg)                  __raw_readb(reg)
+#define fpga_write(val, reg)            __raw_writeb(val, reg)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  H2/P2 Debug board FPGA
+ * ---------------------------------------------------------------------------
+ */
+/* maps in the FPGA registers and the ETHR registers */
+#define H2P2_DBG_FPGA_BASE              0xE8000000              /* VA */
+#define H2P2_DBG_FPGA_SIZE              SZ_4K                   /* SIZE */
+#define H2P2_DBG_FPGA_START             0x04000000              /* PA */
+
+#define H2P2_DBG_FPGA_ETHR_START        (H2P2_DBG_FPGA_START + 0x300)
+#define H2P2_DBG_FPGA_FPGA_REV          IOMEM(H2P2_DBG_FPGA_BASE + 0x10)        /* FPGA Revision */
+#define H2P2_DBG_FPGA_BOARD_REV         IOMEM(H2P2_DBG_FPGA_BASE + 0x12)        /* Board Revision */
+#define H2P2_DBG_FPGA_GPIO              IOMEM(H2P2_DBG_FPGA_BASE + 0x14)        /* GPIO outputs */
+#define H2P2_DBG_FPGA_LEDS              IOMEM(H2P2_DBG_FPGA_BASE + 0x16)        /* LEDs outputs */
+#define H2P2_DBG_FPGA_MISC_INPUTS       IOMEM(H2P2_DBG_FPGA_BASE + 0x18)        /* Misc inputs */
+#define H2P2_DBG_FPGA_LAN_STATUS        IOMEM(H2P2_DBG_FPGA_BASE + 0x1A)        /* LAN Status line */
+#define H2P2_DBG_FPGA_LAN_RESET         IOMEM(H2P2_DBG_FPGA_BASE + 0x1C)        /* LAN Reset line */
+
+/* NOTE:  most boards don't have a static mapping for the FPGA ... */
+struct h2p2_dbg_fpga {
+        /* offset 0x00 */
+        u16             smc91x[8];
+        /* offset 0x10 */
+        u16             fpga_rev;
+        u16             board_rev;
+        u16             gpio_outputs;
+        u16             leds;
+        /* offset 0x18 */
+        u16             misc_inputs;
+        u16             lan_status;
+        u16             lan_reset;
+        u16             reserved0;
+        /* offset 0x20 */
+        u16             ps2_data;
+        u16             ps2_ctrl;
+        /* plus also 4 rs232 ports ... */
+};
+
+/* LEDs definition on debug board (16 LEDs, all physically green) */
+#define H2P2_DBG_FPGA_LED_GREEN         (1 << 15)
+#define H2P2_DBG_FPGA_LED_AMBER         (1 << 14)
+#define H2P2_DBG_FPGA_LED_RED           (1 << 13)
+#define H2P2_DBG_FPGA_LED_BLUE          (1 << 12)
+/*  cpu0 load-meter LEDs */
+#define H2P2_DBG_FPGA_LOAD_METER        (1 << 0)        // A bit of fun on our board ...
+#define H2P2_DBG_FPGA_LOAD_METER_SIZE   11
+#define H2P2_DBG_FPGA_LOAD_METER_MASK   ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
+
+#define H2P2_DBG_FPGA_P2_LED_TIMER              (1 << 0)
+#define H2P2_DBG_FPGA_P2_LED_IDLE               (1 << 1)
+
+/*
+ * ---------------------------------------------------------------------------
+ *  OMAP-1510 FPGA
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP1510_FPGA_BASE              0xE8000000              /* VA */
+#define OMAP1510_FPGA_SIZE              SZ_4K
+#define OMAP1510_FPGA_START             0x08000000              /* PA */
+
+/* Revision */
+#define OMAP1510_FPGA_REV_LOW                   IOMEM(OMAP1510_FPGA_BASE + 0x0)
+#define OMAP1510_FPGA_REV_HIGH                  IOMEM(OMAP1510_FPGA_BASE + 0x1)
+
+#define OMAP1510_FPGA_LCD_PANEL_CONTROL         IOMEM(OMAP1510_FPGA_BASE + 0x2)
+#define OMAP1510_FPGA_LED_DIGIT                 IOMEM(OMAP1510_FPGA_BASE + 0x3)
+#define INNOVATOR_FPGA_HID_SPI                  IOMEM(OMAP1510_FPGA_BASE + 0x4)
+#define OMAP1510_FPGA_POWER                     IOMEM(OMAP1510_FPGA_BASE + 0x5)
+
+/* Interrupt status */
+#define OMAP1510_FPGA_ISR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x6)
+#define OMAP1510_FPGA_ISR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x7)
+
+/* Interrupt mask */
+#define OMAP1510_FPGA_IMR_LO                    IOMEM(OMAP1510_FPGA_BASE + 0x8)
+#define OMAP1510_FPGA_IMR_HI                    IOMEM(OMAP1510_FPGA_BASE + 0x9)
+
+/* Reset registers */
+#define OMAP1510_FPGA_HOST_RESET                IOMEM(OMAP1510_FPGA_BASE + 0xa)
+#define OMAP1510_FPGA_RST                       IOMEM(OMAP1510_FPGA_BASE + 0xb)
+
+#define OMAP1510_FPGA_AUDIO                     IOMEM(OMAP1510_FPGA_BASE + 0xc)
+#define OMAP1510_FPGA_DIP                       IOMEM(OMAP1510_FPGA_BASE + 0xe)
+#define OMAP1510_FPGA_FPGA_IO                   IOMEM(OMAP1510_FPGA_BASE + 0xf)
+#define OMAP1510_FPGA_UART1                     IOMEM(OMAP1510_FPGA_BASE + 0x14)
+#define OMAP1510_FPGA_UART2                     IOMEM(OMAP1510_FPGA_BASE + 0x15)
+#define OMAP1510_FPGA_OMAP1510_STATUS           IOMEM(OMAP1510_FPGA_BASE + 0x16)
+#define OMAP1510_FPGA_BOARD_REV                 IOMEM(OMAP1510_FPGA_BASE + 0x18)
+#define OMAP1510P1_PPT_DATA                     IOMEM(OMAP1510_FPGA_BASE + 0x100)
+#define OMAP1510P1_PPT_STATUS                   IOMEM(OMAP1510_FPGA_BASE + 0x101)
+#define OMAP1510P1_PPT_CONTROL                  IOMEM(OMAP1510_FPGA_BASE + 0x102)
+
+#define OMAP1510_FPGA_TOUCHSCREEN               IOMEM(OMAP1510_FPGA_BASE + 0x204)
+
+#define INNOVATOR_FPGA_INFO                     IOMEM(OMAP1510_FPGA_BASE + 0x205)
+#define INNOVATOR_FPGA_LCD_BRIGHT_LO            IOMEM(OMAP1510_FPGA_BASE + 0x206)
+#define INNOVATOR_FPGA_LCD_BRIGHT_HI            IOMEM(OMAP1510_FPGA_BASE + 0x207)
+#define INNOVATOR_FPGA_LED_GRN_LO               IOMEM(OMAP1510_FPGA_BASE + 0x208)
+#define INNOVATOR_FPGA_LED_GRN_HI               IOMEM(OMAP1510_FPGA_BASE + 0x209)
+#define INNOVATOR_FPGA_LED_RED_LO               IOMEM(OMAP1510_FPGA_BASE + 0x20a)
+#define INNOVATOR_FPGA_LED_RED_HI               IOMEM(OMAP1510_FPGA_BASE + 0x20b)
+#define INNOVATOR_FPGA_CAM_USB_CONTROL          IOMEM(OMAP1510_FPGA_BASE + 0x20c)
+#define INNOVATOR_FPGA_EXP_CONTROL              IOMEM(OMAP1510_FPGA_BASE + 0x20d)
+#define INNOVATOR_FPGA_ISR2                     IOMEM(OMAP1510_FPGA_BASE + 0x20e)
+#define INNOVATOR_FPGA_IMR2                     IOMEM(OMAP1510_FPGA_BASE + 0x210)
+
+#define OMAP1510_FPGA_ETHR_START                (OMAP1510_FPGA_START + 0x300)
+
+/*
+ * Power up Giga UART driver, turn on HID clock.
+ * Turn off BT power, since we're not using it and it
+ * draws power.
+ */
+#define OMAP1510_FPGA_RESET_VALUE               0x42
+
+#define OMAP1510_FPGA_PCR_IF_PD0                (1 << 7)
+#define OMAP1510_FPGA_PCR_COM2_EN               (1 << 6)
+#define OMAP1510_FPGA_PCR_COM1_EN               (1 << 5)
+#define OMAP1510_FPGA_PCR_EXP_PD0               (1 << 4)
+#define OMAP1510_FPGA_PCR_EXP_PD1               (1 << 3)
+#define OMAP1510_FPGA_PCR_48MHZ_CLK             (1 << 2)
+#define OMAP1510_FPGA_PCR_4MHZ_CLK              (1 << 1)
+#define OMAP1510_FPGA_PCR_RSRVD_BIT0            (1 << 0)
+
+/*
+ * Innovator/OMAP1510 FPGA HID register bit definitions
+ */
+#define OMAP1510_FPGA_HID_SCLK  (1<<0)  /* output */
+#define OMAP1510_FPGA_HID_MOSI  (1<<1)  /* output */
+#define OMAP1510_FPGA_HID_nSS   (1<<2)  /* output 0/1 chip idle/select */
+#define OMAP1510_FPGA_HID_nHSUS (1<<3)  /* output 0/1 host active/suspended */
+#define OMAP1510_FPGA_HID_MISO  (1<<4)  /* input */
+#define OMAP1510_FPGA_HID_ATN   (1<<5)  /* input  0/1 chip idle/ATN */
+#define OMAP1510_FPGA_HID_rsrvd (1<<6)
+#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
+
+/* The FPGA IRQ is cascaded through GPIO_13 */
+#define OMAP1510_INT_FPGA               (IH_GPIO_BASE + 13)
+
+/* IRQ Numbers for interrupts muxed through the FPGA */
+#define OMAP1510_INT_FPGA_ATN           (OMAP_FPGA_IRQ_BASE + 0)
+#define OMAP1510_INT_FPGA_ACK           (OMAP_FPGA_IRQ_BASE + 1)
+#define OMAP1510_INT_FPGA2              (OMAP_FPGA_IRQ_BASE + 2)
+#define OMAP1510_INT_FPGA3              (OMAP_FPGA_IRQ_BASE + 3)
+#define OMAP1510_INT_FPGA4              (OMAP_FPGA_IRQ_BASE + 4)
+#define OMAP1510_INT_FPGA5              (OMAP_FPGA_IRQ_BASE + 5)
+#define OMAP1510_INT_FPGA6              (OMAP_FPGA_IRQ_BASE + 6)
+#define OMAP1510_INT_FPGA7              (OMAP_FPGA_IRQ_BASE + 7)
+#define OMAP1510_INT_FPGA8              (OMAP_FPGA_IRQ_BASE + 8)
+#define OMAP1510_INT_FPGA9              (OMAP_FPGA_IRQ_BASE + 9)
+#define OMAP1510_INT_FPGA10             (OMAP_FPGA_IRQ_BASE + 10)
+#define OMAP1510_INT_FPGA11             (OMAP_FPGA_IRQ_BASE + 11)
+#define OMAP1510_INT_FPGA12             (OMAP_FPGA_IRQ_BASE + 12)
+#define OMAP1510_INT_ETHER              (OMAP_FPGA_IRQ_BASE + 13)
+#define OMAP1510_INT_FPGAUART1          (OMAP_FPGA_IRQ_BASE + 14)
+#define OMAP1510_INT_FPGAUART2          (OMAP_FPGA_IRQ_BASE + 15)
+#define OMAP1510_INT_FPGA_TS            (OMAP_FPGA_IRQ_BASE + 16)
+#define OMAP1510_INT_FPGA17             (OMAP_FPGA_IRQ_BASE + 17)
+#define OMAP1510_INT_FPGA_CAM           (OMAP_FPGA_IRQ_BASE + 18)
+#define OMAP1510_INT_FPGA_RTC_A         (OMAP_FPGA_IRQ_BASE + 19)
+#define OMAP1510_INT_FPGA_RTC_B         (OMAP_FPGA_IRQ_BASE + 20)
+#define OMAP1510_INT_FPGA_CD            (OMAP_FPGA_IRQ_BASE + 21)
+#define OMAP1510_INT_FPGA22             (OMAP_FPGA_IRQ_BASE + 22)
+#define OMAP1510_INT_FPGA23             (OMAP_FPGA_IRQ_BASE + 23)
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
new file mode 100644
index 00000000000..10da0e07c0c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpio-switch.h
@@ -0,0 +1,54 @@
+/*
+ * GPIO switch definitions
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_SWITCH_H
+#define __ASM_ARCH_OMAP_GPIO_SWITCH_H
+
+#include <linux/types.h>
+
+/* Cover:
+ *      high -> closed
+ *      low  -> open
+ * Connection:
+ *      high -> connected
+ *      low  -> disconnected
+ * Activity:
+ *      high -> active
+ *      low  -> inactive
+ *
+ */
+#define OMAP_GPIO_SWITCH_TYPE_COVER             0x0000
+#define OMAP_GPIO_SWITCH_TYPE_CONNECTION        0x0001
+#define OMAP_GPIO_SWITCH_TYPE_ACTIVITY          0x0002
+#define OMAP_GPIO_SWITCH_FLAG_INVERTED          0x0001
+#define OMAP_GPIO_SWITCH_FLAG_OUTPUT            0x0002
+
+struct omap_gpio_switch {
+        const char *name;
+        s16 gpio;
+        unsigned flags:4;
+        unsigned type:4;
+
+        /* Time in ms to debounce when transitioning from
+         * inactive state to active state. */
+        u16 debounce_rising;
+        /* Same for transition from active to inactive state. */
+        u16 debounce_falling;
+
+        /* notify board-specific code about state changes */
+        void (* notify)(void *data, int state);
+        void *notify_data;
+};
+
+/* Call at init time only */
+extern void omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
+                                        int count);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
new file mode 100644
index 00000000000..91e8de3db08
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -0,0 +1,262 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpio.h
+ *
+ * OMAP GPIO handling defines and functions
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ *
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPIO_H
+#define __ASM_ARCH_OMAP_GPIO_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+
+#define OMAP1_MPUIO_BASE                        0xfffb5000
+
+/*
+ * These are the omap15xx/16xx offsets. The omap7xx offset are
+ * OMAP_MPUIO_ / 2 offsets below.
+ */
+#define OMAP_MPUIO_INPUT_LATCH          0x00
+#define OMAP_MPUIO_OUTPUT               0x04
+#define OMAP_MPUIO_IO_CNTL              0x08
+#define OMAP_MPUIO_KBR_LATCH            0x10
+#define OMAP_MPUIO_KBC                  0x14
+#define OMAP_MPUIO_GPIO_EVENT_MODE      0x18
+#define OMAP_MPUIO_GPIO_INT_EDGE        0x1c
+#define OMAP_MPUIO_KBD_INT              0x20
+#define OMAP_MPUIO_GPIO_INT             0x24
+#define OMAP_MPUIO_KBD_MASKIT           0x28
+#define OMAP_MPUIO_GPIO_MASKIT          0x2c
+#define OMAP_MPUIO_GPIO_DEBOUNCING      0x30
+#define OMAP_MPUIO_LATCH                0x34
+
+#define OMAP34XX_NR_GPIOS               6
+
+/*
+ * OMAP1510 GPIO registers
+ */
+#define OMAP1510_GPIO_DATA_INPUT        0x00
+#define OMAP1510_GPIO_DATA_OUTPUT       0x04
+#define OMAP1510_GPIO_DIR_CONTROL       0x08
+#define OMAP1510_GPIO_INT_CONTROL       0x0c
+#define OMAP1510_GPIO_INT_MASK          0x10
+#define OMAP1510_GPIO_INT_STATUS        0x14
+#define OMAP1510_GPIO_PIN_CONTROL       0x18
+
+#define OMAP1510_IH_GPIO_BASE           64
+
+/*
+ * OMAP1610 specific GPIO registers
+ */
+#define OMAP1610_GPIO_REVISION          0x0000
+#define OMAP1610_GPIO_SYSCONFIG         0x0010
+#define OMAP1610_GPIO_SYSSTATUS         0x0014
+#define OMAP1610_GPIO_IRQSTATUS1        0x0018
+#define OMAP1610_GPIO_IRQENABLE1        0x001c
+#define OMAP1610_GPIO_WAKEUPENABLE      0x0028
+#define OMAP1610_GPIO_DATAIN            0x002c
+#define OMAP1610_GPIO_DATAOUT           0x0030
+#define OMAP1610_GPIO_DIRECTION         0x0034
+#define OMAP1610_GPIO_EDGE_CTRL1        0x0038
+#define OMAP1610_GPIO_EDGE_CTRL2        0x003c
+#define OMAP1610_GPIO_CLEAR_IRQENABLE1  0x009c
+#define OMAP1610_GPIO_CLEAR_WAKEUPENA   0x00a8
+#define OMAP1610_GPIO_CLEAR_DATAOUT     0x00b0
+#define OMAP1610_GPIO_SET_IRQENABLE1    0x00dc
+#define OMAP1610_GPIO_SET_WAKEUPENA     0x00e8
+#define OMAP1610_GPIO_SET_DATAOUT       0x00f0
+
+/*
+ * OMAP7XX specific GPIO registers
+ */
+#define OMAP7XX_GPIO_DATA_INPUT         0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT        0x04
+#define OMAP7XX_GPIO_DIR_CONTROL        0x08
+#define OMAP7XX_GPIO_INT_CONTROL        0x0c
+#define OMAP7XX_GPIO_INT_MASK           0x10
+#define OMAP7XX_GPIO_INT_STATUS         0x14
+
+/*
+ * omap2+ specific GPIO registers
+ */
+#define OMAP24XX_GPIO_REVISION          0x0000
+#define OMAP24XX_GPIO_IRQSTATUS1        0x0018
+#define OMAP24XX_GPIO_IRQSTATUS2        0x0028
+#define OMAP24XX_GPIO_IRQENABLE2        0x002c
+#define OMAP24XX_GPIO_IRQENABLE1        0x001c
+#define OMAP24XX_GPIO_WAKE_EN           0x0020
+#define OMAP24XX_GPIO_CTRL              0x0030
+#define OMAP24XX_GPIO_OE                0x0034
+#define OMAP24XX_GPIO_DATAIN            0x0038
+#define OMAP24XX_GPIO_DATAOUT           0x003c
+#define OMAP24XX_GPIO_LEVELDETECT0      0x0040
+#define OMAP24XX_GPIO_LEVELDETECT1      0x0044
+#define OMAP24XX_GPIO_RISINGDETECT      0x0048
+#define OMAP24XX_GPIO_FALLINGDETECT     0x004c
+#define OMAP24XX_GPIO_DEBOUNCE_EN       0x0050
+#define OMAP24XX_GPIO_DEBOUNCE_VAL      0x0054
+#define OMAP24XX_GPIO_CLEARIRQENABLE1   0x0060
+#define OMAP24XX_GPIO_SETIRQENABLE1     0x0064
+#define OMAP24XX_GPIO_CLEARWKUENA       0x0080
+#define OMAP24XX_GPIO_SETWKUENA         0x0084
+#define OMAP24XX_GPIO_CLEARDATAOUT      0x0090
+#define OMAP24XX_GPIO_SETDATAOUT        0x0094
+
+#define OMAP4_GPIO_REVISION             0x0000
+#define OMAP4_GPIO_EOI                  0x0020
+#define OMAP4_GPIO_IRQSTATUSRAW0        0x0024
+#define OMAP4_GPIO_IRQSTATUSRAW1        0x0028
+#define OMAP4_GPIO_IRQSTATUS0           0x002c
+#define OMAP4_GPIO_IRQSTATUS1           0x0030
+#define OMAP4_GPIO_IRQSTATUSSET0        0x0034
+#define OMAP4_GPIO_IRQSTATUSSET1        0x0038
+#define OMAP4_GPIO_IRQSTATUSCLR0        0x003c
+#define OMAP4_GPIO_IRQSTATUSCLR1        0x0040
+#define OMAP4_GPIO_IRQWAKEN0            0x0044
+#define OMAP4_GPIO_IRQWAKEN1            0x0048
+#define OMAP4_GPIO_IRQENABLE1           0x011c
+#define OMAP4_GPIO_WAKE_EN              0x0120
+#define OMAP4_GPIO_IRQSTATUS2           0x0128
+#define OMAP4_GPIO_IRQENABLE2           0x012c
+#define OMAP4_GPIO_CTRL                 0x0130
+#define OMAP4_GPIO_OE                   0x0134
+#define OMAP4_GPIO_DATAIN               0x0138
+#define OMAP4_GPIO_DATAOUT              0x013c
+#define OMAP4_GPIO_LEVELDETECT0         0x0140
+#define OMAP4_GPIO_LEVELDETECT1         0x0144
+#define OMAP4_GPIO_RISINGDETECT         0x0148
+#define OMAP4_GPIO_FALLINGDETECT        0x014c
+#define OMAP4_GPIO_DEBOUNCENABLE        0x0150
+#define OMAP4_GPIO_DEBOUNCINGTIME       0x0154
+#define OMAP4_GPIO_CLEARIRQENABLE1      0x0160
+#define OMAP4_GPIO_SETIRQENABLE1        0x0164
+#define OMAP4_GPIO_CLEARWKUENA          0x0180
+#define OMAP4_GPIO_SETWKUENA            0x0184
+#define OMAP4_GPIO_CLEARDATAOUT         0x0190
+#define OMAP4_GPIO_SETDATAOUT           0x0194
+
+#define OMAP_MPUIO(nr)          (OMAP_MAX_GPIO_LINES + (nr))
+#define OMAP_GPIO_IS_MPUIO(nr)  ((nr) >= OMAP_MAX_GPIO_LINES)
+
+#define OMAP_GPIO_IRQ(nr)       (OMAP_GPIO_IS_MPUIO(nr) ? \
+                                 IH_MPUIO_BASE + ((nr) & 0x0f) : \
+                                 IH_GPIO_BASE + (nr))
+
+#define METHOD_MPUIO            0
+#define METHOD_GPIO_1510        1
+#define METHOD_GPIO_1610        2
+#define METHOD_GPIO_7XX         3
+#define METHOD_GPIO_24XX        5
+#define METHOD_GPIO_44XX        6
+
+struct omap_gpio_dev_attr {
+        int bank_width;         /* GPIO bank width */
+        bool dbck_flag;         /* dbck required or not - True for OMAP3&4 */
+};
+
+struct omap_gpio_reg_offs {
+        u16 revision;
+        u16 direction;
+        u16 datain;
+        u16 dataout;
+        u16 set_dataout;
+        u16 clr_dataout;
+        u16 irqstatus;
+        u16 irqstatus2;
+        u16 irqenable;
+        u16 set_irqenable;
+        u16 clr_irqenable;
+        u16 debounce;
+        u16 debounce_en;
+
+        bool irqenable_inv;
+};
+
+struct omap_gpio_platform_data {
+        u16 virtual_irq_start;
+        int bank_type;
+        int bank_width;         /* GPIO bank width */
+        int bank_stride;        /* Only needed for omap1 MPUIO */
+        bool dbck_flag;         /* dbck required or not - True for OMAP3&4 */
+
+        struct omap_gpio_reg_offs *regs;
+};
+
+/* TODO: Analyze removing gpio_bank_count usage from driver code */
+extern int gpio_bank_count;
+
+extern void omap2_gpio_prepare_for_idle(int off_mode);
+extern void omap2_gpio_resume_after_idle(void);
+extern void omap_set_gpio_debounce(int gpio, int enable);
+extern void omap_set_gpio_debounce_time(int gpio, int enable);
+extern void omap_gpio_save_context(void);
+extern void omap_gpio_restore_context(void);
+/*-------------------------------------------------------------------------*/
+
+/* Wrappers for "new style" GPIO calls, using the new infrastructure
+ * which lets us plug in FPGA, I2C, and other implementations.
+ * *
+ * The original OMAP-specific calls should eventually be removed.
+ */
+
+#include <linux/errno.h>
+#include <asm-generic/gpio.h>
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        __gpio_set_value(gpio, value);
+}
+
+static inline int gpio_cansleep(unsigned gpio)
+{
+        return __gpio_cansleep(gpio);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+        return __gpio_to_irq(gpio);
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+        int tmp;
+
+        /* omap1 SOC mpuio */
+        if (cpu_class_is_omap1() && (irq < (IH_MPUIO_BASE + 16)))
+                return (irq - IH_MPUIO_BASE) + OMAP_MAX_GPIO_LINES;
+
+        /* SOC gpio */
+        tmp = irq - IH_GPIO_BASE;
+        if (tmp < OMAP_MAX_GPIO_LINES)
+                return tmp;
+
+        /* we don't supply reverse mappings for non-SOC gpios */
+        return -EIO;
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
new file mode 100644
index 00000000000..b64fbee4d56
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96   (1 << 4)
+#define GPMC_MUX_ADD_DATA       (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON           (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON          (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+        int     cs;
+        int     gpio_irq;
+        int     gpio_pwrdwn;
+        int     gpio_reset;
+        int     wait_pin;       /* Optional GPMC_CONFIG1_WAITPINSELECT */
+        u32     flags;
+        int     (*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+        defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data       NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
new file mode 100644
index 00000000000..ea6c9c88c72
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/plat-omap/include/plat/gpmc-smsc911x.h
+ *
+ * Copyright (C) 2009 Li-Pro.Net
+ * Stephan Linz <linz@li-pro.net>
+ *
+ * Modified from arch/arm/plat-omap/include/plat/gpmc-smc91x.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__
+
+struct omap_smsc911x_platform_data {
+        int     id;
+        int     cs;
+        int     gpio_irq;
+        int     gpio_reset;
+        u32     flags;
+};
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d);
+
+#else
+
+static inline void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
new file mode 100644
index 00000000000..1527929b445
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -0,0 +1,160 @@
+/*
+ * General-Purpose Memory Controller for OMAP2
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_GPMC_H
+#define __OMAP2_GPMC_H
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM             8
+
+#define GPMC_CS_CONFIG1         0x00
+#define GPMC_CS_CONFIG2         0x04
+#define GPMC_CS_CONFIG3         0x08
+#define GPMC_CS_CONFIG4         0x0c
+#define GPMC_CS_CONFIG5         0x10
+#define GPMC_CS_CONFIG6         0x14
+#define GPMC_CS_CONFIG7         0x18
+#define GPMC_CS_NAND_COMMAND    0x1c
+#define GPMC_CS_NAND_ADDRESS    0x20
+#define GPMC_CS_NAND_DATA       0x24
+
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY     0x00000001
+#define GPMC_CONFIG_DEV_SIZE    0x00000002
+#define GPMC_CONFIG_DEV_TYPE    0x00000003
+#define GPMC_SET_IRQ_STATUS     0x00000004
+#define GPMC_CONFIG_WP          0x00000005
+
+#define GPMC_GET_IRQ_STATUS     0x00000006
+#define GPMC_PREFETCH_FIFO_CNT  0x00000007 /* bytes available in FIFO for r/w */
+#define GPMC_PREFETCH_COUNT     0x00000008 /* remaining bytes to be read/write*/
+#define GPMC_STATUS_BUFFER      0x00000009 /* 1: buffer is available to write */
+
+#define GPMC_NAND_COMMAND       0x0000000a
+#define GPMC_NAND_ADDRESS       0x0000000b
+#define GPMC_NAND_DATA          0x0000000c
+
+#define GPMC_ENABLE_IRQ         0x0000000d
+
+/* ECC commands */
+#define GPMC_ECC_READ           0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE          1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN        2 /* Reset before syndrom is read back */
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP     (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP  (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC     (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC      (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC    (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC     (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val)      ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON      (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON     (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val)  ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val)    ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
+#define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID            (1 << 6)
+
+#define GPMC_DEVICETYPE_NOR             0
+#define GPMC_DEVICETYPE_NAND            2
+#define GPMC_CONFIG_WRITEPROTECT        0x00000010
+#define GPMC_STATUS_BUFF_EMPTY          0x00000001
+#define WR_RD_PIN_MONITORING            0x00600000
+#define GPMC_PREFETCH_STATUS_FIFO_CNT(val)      ((val >> 24) & 0x7F)
+#define GPMC_PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define GPMC_IRQ_FIFOEVENTENABLE        0x01
+#define GPMC_IRQ_COUNT_EVENT            0x02
+
+#define PREFETCH_FIFOTHRESHOLD_MAX      0x40
+#define PREFETCH_FIFOTHRESHOLD(val)     ((val) << 8)
+
+enum omap_ecc {
+                /* 1-bit ecc: stored at end of spare area */
+        OMAP_ECC_HAMMING_CODE_DEFAULT = 0, /* Default, s/w method */
+        OMAP_ECC_HAMMING_CODE_HW, /* gpmc to detect the error */
+                /* 1-bit ecc: stored at beginning of spare area as romcode */
+        OMAP_ECC_HAMMING_CODE_HW_ROMCODE, /* gpmc method & romcode layout */
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+        /* Minimum clock period for synchronous mode (in picoseconds) */
+        u32 sync_clk;
+
+        /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+        u16 cs_on;              /* Assertion time */
+        u16 cs_rd_off;          /* Read deassertion time */
+        u16 cs_wr_off;          /* Write deassertion time */
+
+        /* ADV signal timings corresponding to GPMC_CONFIG3 */
+        u16 adv_on;             /* Assertion time */
+        u16 adv_rd_off;         /* Read deassertion time */
+        u16 adv_wr_off;         /* Write deassertion time */
+
+        /* WE signals timings corresponding to GPMC_CONFIG4 */
+        u16 we_on;              /* WE assertion time */
+        u16 we_off;             /* WE deassertion time */
+
+        /* OE signals timings corresponding to GPMC_CONFIG4 */
+        u16 oe_on;              /* OE assertion time */
+        u16 oe_off;             /* OE deassertion time */
+
+        /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+        u16 page_burst_access;  /* Multiple access word delay */
+        u16 access;             /* Start-cycle to first data valid delay */
+        u16 rd_cycle;           /* Total read cycle time */
+        u16 wr_cycle;           /* Total write cycle time */
+
+        /* The following are only on OMAP3430 */
+        u16 wr_access;          /* WRACCESSTIME */
+        u16 wr_data_mux_bus;    /* WRDATAONADMUXBUS */
+};
+
+extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns);
+extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps);
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns);
+extern unsigned long gpmc_get_fclk_period(void);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern u32 gpmc_cs_read_reg(int cs, int idx);
+extern int gpmc_cs_calc_divider(int cs, unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_cs_set_reserved(int cs, int reserved);
+extern int gpmc_cs_reserved(int cs);
+extern int gpmc_prefetch_enable(int cs, int fifo_th, int dma_mode,
+                                        unsigned int u32_count, int is_write);
+extern int gpmc_prefetch_reset(int cs);
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
+extern int gpmc_read_status(int cmd);
+extern int gpmc_cs_configure(int cs, int cmd, int wval);
+extern int gpmc_nand_read(int cs, int cmd);
+extern int gpmc_nand_write(int cs, int cmd, int wval);
+
+int gpmc_enable_hwecc(int cs, int mode, int dev_width, int ecc_size);
+int gpmc_calculate_ecc(int cs, const u_char *dat, u_char *ecc_code);
+#endif
diff --git a/arch/arm/plat-omap/include/plat/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
new file mode 100644
index 00000000000..e87efe1499b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -0,0 +1,291 @@
+/*
+ * arch/arm/plat-omap/include/mach/hardware.h
+ *
+ * Hardware definitions for TI OMAP processors and boards
+ *
+ * NOTE: Please put device driver specific defines into a separate header
+ *       file for each driver.
+ *
+ * Copyright (C) 2001 RidgeRun, Inc.
+ * Author: RidgeRun, Inc. Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Reorganized for Linux-2.6 by Tony Lindgren <tony@atomide.com>
+ *                          and Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP_HARDWARE_H
+#define __ASM_ARCH_OMAP_HARDWARE_H
+
+#include <asm/sizes.h>
+#ifndef __ASSEMBLER__
+#include <asm/types.h>
+#include <plat/cpu.h>
+#endif
+#include <plat/serial.h>
+
+/*
+ * ---------------------------------------------------------------------------
+ * Common definitions for all OMAP processors
+ * NOTE: Put all processor or board specific parts to the special header
+ *       files.
+ * ---------------------------------------------------------------------------
+ */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Timers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_MPU_TIMER1_BASE    (0xfffec500)
+#define OMAP_MPU_TIMER2_BASE    (0xfffec600)
+#define OMAP_MPU_TIMER3_BASE    (0xfffec700)
+#define MPU_TIMER_FREE          (1 << 6)
+#define MPU_TIMER_CLOCK_ENABLE  (1 << 5)
+#define MPU_TIMER_AR            (1 << 1)
+#define MPU_TIMER_ST            (1 << 0)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define CLKGEN_REG_BASE         (0xfffece00)
+#define ARM_CKCTL               (CLKGEN_REG_BASE + 0x0)
+#define ARM_IDLECT1             (CLKGEN_REG_BASE + 0x4)
+#define ARM_IDLECT2             (CLKGEN_REG_BASE + 0x8)
+#define ARM_EWUPCT              (CLKGEN_REG_BASE + 0xC)
+#define ARM_RSTCT1              (CLKGEN_REG_BASE + 0x10)
+#define ARM_RSTCT2              (CLKGEN_REG_BASE + 0x14)
+#define ARM_SYSST               (CLKGEN_REG_BASE + 0x18)
+#define ARM_IDLECT3             (CLKGEN_REG_BASE + 0x24)
+
+#define CK_RATEF                1
+#define CK_IDLEF                2
+#define CK_ENABLEF              4
+#define CK_SELECTF              8
+#define SETARM_IDLE_SHIFT
+
+/* DPLL control registers */
+#define DPLL_CTL                (0xfffecf00)
+
+/* DSP clock control. Must use __raw_readw() and __raw_writew() with these */
+#define DSP_CONFIG_REG_BASE     IOMEM(0xe1008000)
+#define DSP_CKCTL               (DSP_CONFIG_REG_BASE + 0x0)
+#define DSP_IDLECT1             (DSP_CONFIG_REG_BASE + 0x4)
+#define DSP_IDLECT2             (DSP_CONFIG_REG_BASE + 0x8)
+#define DSP_RSTCT2              (DSP_CONFIG_REG_BASE + 0x14)
+
+/*
+ * ---------------------------------------------------------------------------
+ * UPLD
+ * ---------------------------------------------------------------------------
+ */
+#define ULPD_REG_BASE           (0xfffe0800)
+#define ULPD_IT_STATUS          (ULPD_REG_BASE + 0x14)
+#define ULPD_SETUP_ANALOG_CELL_3        (ULPD_REG_BASE + 0x24)
+#define ULPD_CLOCK_CTRL         (ULPD_REG_BASE + 0x30)
+#       define DIS_USB_PVCI_CLK         (1 << 5)        /* no USB/FAC synch */
+#       define USB_MCLK_EN              (1 << 4)        /* enable W4_USB_CLKO */
+#define ULPD_SOFT_REQ           (ULPD_REG_BASE + 0x34)
+#       define SOFT_UDC_REQ             (1 << 4)
+#       define SOFT_USB_CLK_REQ         (1 << 3)
+#       define SOFT_DPLL_REQ            (1 << 0)
+#define ULPD_DPLL_CTRL          (ULPD_REG_BASE + 0x3c)
+#define ULPD_STATUS_REQ         (ULPD_REG_BASE + 0x40)
+#define ULPD_APLL_CTRL          (ULPD_REG_BASE + 0x4c)
+#define ULPD_POWER_CTRL         (ULPD_REG_BASE + 0x50)
+#define ULPD_SOFT_DISABLE_REQ_REG       (ULPD_REG_BASE + 0x68)
+#       define DIS_MMC2_DPLL_REQ        (1 << 11)
+#       define DIS_MMC1_DPLL_REQ        (1 << 10)
+#       define DIS_UART3_DPLL_REQ       (1 << 9)
+#       define DIS_UART2_DPLL_REQ       (1 << 8)
+#       define DIS_UART1_DPLL_REQ       (1 << 7)
+#       define DIS_USB_HOST_DPLL_REQ    (1 << 6)
+#define ULPD_SDW_CLK_DIV_CTRL_SEL       (ULPD_REG_BASE + 0x74)
+#define ULPD_CAM_CLK_CTRL       (ULPD_REG_BASE + 0x7c)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* Watchdog timer within the OMAP3.2 gigacell */
+#define OMAP_MPU_WATCHDOG_BASE  (0xfffec800)
+#define OMAP_WDT_TIMER          (OMAP_MPU_WATCHDOG_BASE + 0x0)
+#define OMAP_WDT_LOAD_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_READ_TIM       (OMAP_MPU_WATCHDOG_BASE + 0x4)
+#define OMAP_WDT_TIMER_MODE     (OMAP_MPU_WATCHDOG_BASE + 0x8)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#ifdef CONFIG_ARCH_OMAP1
+
+/*
+ * XXX: These probably want to be moved to arch/arm/mach-omap/omap1/irq.c
+ * or something similar.. -- PFM.
+ */
+
+#define OMAP_IH1_BASE           0xfffecb00
+#define OMAP_IH2_BASE           0xfffe0000
+
+#define OMAP_IH1_ITR            (OMAP_IH1_BASE + 0x00)
+#define OMAP_IH1_MIR            (OMAP_IH1_BASE + 0x04)
+#define OMAP_IH1_SIR_IRQ        (OMAP_IH1_BASE + 0x10)
+#define OMAP_IH1_SIR_FIQ        (OMAP_IH1_BASE + 0x14)
+#define OMAP_IH1_CONTROL        (OMAP_IH1_BASE + 0x18)
+#define OMAP_IH1_ILR0           (OMAP_IH1_BASE + 0x1c)
+#define OMAP_IH1_ISR            (OMAP_IH1_BASE + 0x9c)
+
+#define OMAP_IH2_ITR            (OMAP_IH2_BASE + 0x00)
+#define OMAP_IH2_MIR            (OMAP_IH2_BASE + 0x04)
+#define OMAP_IH2_SIR_IRQ        (OMAP_IH2_BASE + 0x10)
+#define OMAP_IH2_SIR_FIQ        (OMAP_IH2_BASE + 0x14)
+#define OMAP_IH2_CONTROL        (OMAP_IH2_BASE + 0x18)
+#define OMAP_IH2_ILR0           (OMAP_IH2_BASE + 0x1c)
+#define OMAP_IH2_ISR            (OMAP_IH2_BASE + 0x9c)
+
+#define IRQ_ITR_REG_OFFSET      0x00
+#define IRQ_MIR_REG_OFFSET      0x04
+#define IRQ_SIR_IRQ_REG_OFFSET  0x10
+#define IRQ_SIR_FIQ_REG_OFFSET  0x14
+#define IRQ_CONTROL_REG_OFFSET  0x18
+#define IRQ_ISR_REG_OFFSET      0x9c
+#define IRQ_ILR0_REG_OFFSET     0x1c
+#define IRQ_GMR_REG_OFFSET      0xa0
+
+#endif
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define MOD_CONF_CTRL_0         0xfffe1080
+#define MOD_CONF_CTRL_1         0xfffe1110
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin multiplexing registers
+ * ----------------------------------------------------------------------------
+ */
+#define FUNC_MUX_CTRL_0         0xfffe1000
+#define FUNC_MUX_CTRL_1         0xfffe1004
+#define FUNC_MUX_CTRL_2         0xfffe1008
+#define COMP_MODE_CTRL_0        0xfffe100c
+#define FUNC_MUX_CTRL_3         0xfffe1010
+#define FUNC_MUX_CTRL_4         0xfffe1014
+#define FUNC_MUX_CTRL_5         0xfffe1018
+#define FUNC_MUX_CTRL_6         0xfffe101C
+#define FUNC_MUX_CTRL_7         0xfffe1020
+#define FUNC_MUX_CTRL_8         0xfffe1024
+#define FUNC_MUX_CTRL_9         0xfffe1028
+#define FUNC_MUX_CTRL_A         0xfffe102C
+#define FUNC_MUX_CTRL_B         0xfffe1030
+#define FUNC_MUX_CTRL_C         0xfffe1034
+#define FUNC_MUX_CTRL_D         0xfffe1038
+#define PULL_DWN_CTRL_0         0xfffe1040
+#define PULL_DWN_CTRL_1         0xfffe1044
+#define PULL_DWN_CTRL_2         0xfffe1048
+#define PULL_DWN_CTRL_3         0xfffe104c
+#define PULL_DWN_CTRL_4         0xfffe10ac
+
+/* OMAP-1610 specific multiplexing registers */
+#define FUNC_MUX_CTRL_E         0xfffe1090
+#define FUNC_MUX_CTRL_F         0xfffe1094
+#define FUNC_MUX_CTRL_10        0xfffe1098
+#define FUNC_MUX_CTRL_11        0xfffe109c
+#define FUNC_MUX_CTRL_12        0xfffe10a0
+#define PU_PD_SEL_0             0xfffe10b4
+#define PU_PD_SEL_1             0xfffe10b8
+#define PU_PD_SEL_2             0xfffe10bc
+#define PU_PD_SEL_3             0xfffe10c0
+#define PU_PD_SEL_4             0xfffe10c4
+
+/* Timer32K for 1610 and 1710*/
+#define OMAP_TIMER32K_BASE      0xFFFBC400
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_PUBLIC_CNTL_BASE           0xfffed300
+#define MPU_PUBLIC_TIPB_CNTL            (TIPB_PUBLIC_CNTL_BASE + 0x8)
+#define TIPB_PRIVATE_CNTL_BASE          0xfffeca00
+#define MPU_PRIVATE_TIPB_CNTL           (TIPB_PRIVATE_CNTL_BASE + 0x8)
+
+/*
+ * ----------------------------------------------------------------------------
+ * MPUI interface
+ * ----------------------------------------------------------------------------
+ */
+#define MPUI_BASE                       (0xfffec900)
+#define MPUI_CTRL                       (MPUI_BASE + 0x0)
+#define MPUI_DEBUG_ADDR                 (MPUI_BASE + 0x4)
+#define MPUI_DEBUG_DATA                 (MPUI_BASE + 0x8)
+#define MPUI_DEBUG_FLAG                 (MPUI_BASE + 0xc)
+#define MPUI_STATUS_REG                 (MPUI_BASE + 0x10)
+#define MPUI_DSP_STATUS                 (MPUI_BASE + 0x14)
+#define MPUI_DSP_BOOT_CONFIG            (MPUI_BASE + 0x18)
+#define MPUI_DSP_API_CONFIG             (MPUI_BASE + 0x1c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * LED Pulse Generator
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_LPG1_BASE                  0xfffbd000
+#define OMAP_LPG2_BASE                  0xfffbd800
+#define OMAP_LPG1_LCR                   (OMAP_LPG1_BASE + 0x00)
+#define OMAP_LPG1_PMR                   (OMAP_LPG1_BASE + 0x04)
+#define OMAP_LPG2_LCR                   (OMAP_LPG2_BASE + 0x00)
+#define OMAP_LPG2_PMR                   (OMAP_LPG2_BASE + 0x04)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pulse-Width Light
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP_PWL_BASE                   0xfffb5800
+#define OMAP_PWL_ENABLE                 (OMAP_PWL_BASE + 0x00)
+#define OMAP_PWL_CLK_ENABLE             (OMAP_PWL_BASE + 0x04)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Processor specific defines
+ * ---------------------------------------------------------------------------
+ */
+
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
+#include <plat/ti816x.h>
+
+#endif  /* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/plat/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
new file mode 100644
index 00000000000..886248d32b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/hwa742.h
@@ -0,0 +1,8 @@
+#ifndef _HWA742_H
+#define _HWA742_H
+
+struct hwa742_platform_data {
+        unsigned        te_connected:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
new file mode 100644
index 00000000000..d72ec85c97e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -0,0 +1,314 @@
+/*
+ * arch/arm/plat-omap/include/mach/io.h
+ *
+ * IO definitions for TI OMAP processors and boards
+ *
+ * Copied from arch/arm/mach-sa1100/include/mach/io.h
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Modifications:
+ *  06-12-1997  RMK     Created.
+ *  07-04-1999  RMK     Major cleanup
+ */
+
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)         __typesafe_io(a)
+#define __mem_pci(a)    (a)
+
+/*
+ * ----------------------------------------------------------------------------
+ * I/O mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)                (x)
+#else
+#define IOMEM(x)                ((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET         0x01000000      /* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)    IOMEM((pa) - OMAP1_IO_OFFSET)
+
+#define OMAP2_L3_IO_OFFSET      0x90000000
+#define OMAP2_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
+
+
+#define OMAP2_L4_IO_OFFSET      0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa) IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP4_L3_IO_OFFSET      0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa) IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define OMAP4_L3_PER_IO_OFFSET  0xb1100000
+#define OMAP4_L3_PER_IO_ADDRESS(pa)     IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
+
+#define OMAP4_GPMC_IO_OFFSET            0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa)       IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_EMU_IO_OFFSET             0xaa800000      /* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa)        IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1_IO_PHYS           0xFFFB0000
+#define OMAP1_IO_SIZE           0x40000
+#define OMAP1_IO_VIRT           (OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap2 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP2 */
+#define L3_24XX_PHYS    L3_24XX_BASE    /* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT    (L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_24XX_SIZE    SZ_1M           /* 44kB of 128MB used, want 1MB sect */
+#define L4_24XX_PHYS    L4_24XX_BASE    /* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT    (L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_24XX_SIZE    SZ_1M           /* 1MB of 128MB used, want 1MB sect */
+
+#define L4_WK_243X_PHYS         L4_WK_243X_BASE /* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT         (L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_WK_243X_SIZE         SZ_1M
+#define OMAP243X_GPMC_PHYS      OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT      (OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+                                                /* 0x6e000000 --> 0xfe000000 */
+#define OMAP243X_GPMC_SIZE      SZ_1M
+#define OMAP243X_SDRC_PHYS      OMAP243X_SDRC_BASE
+                                                /* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT      (OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SDRC_SIZE      SZ_1M
+#define OMAP243X_SMS_PHYS       OMAP243X_SMS_BASE
+                                                /* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT       (OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP243X_SMS_SIZE       SZ_1M
+
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS       OMAP2420_DSP_MEM_BASE
+                                                /* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT       0xfc100000
+#define DSP_MEM_2420_SIZE       0x28000
+#define DSP_IPI_2420_PHYS       OMAP2420_DSP_IPI_BASE
+                                                /* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT       0xfc128000
+#define DSP_IPI_2420_SIZE       SZ_4K
+#define DSP_MMU_2420_PHYS       OMAP2420_DSP_MMU_BASE
+                                                /* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT       0xfc129000
+#define DSP_MMU_2420_SIZE       SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap3 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS            L3_34XX_BASE    /* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT            (L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
+#define L3_34XX_SIZE            SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS            L4_34XX_BASE    /* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT            (L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_34XX_SIZE            SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_PER_34XX_PHYS        L4_PER_34XX_BASE
+                                                /* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT        (L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_34XX_SIZE        SZ_1M
+
+#define L4_EMU_34XX_PHYS        L4_EMU_34XX_BASE
+                                                /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT        (L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE        SZ_8M
+
+#define OMAP34XX_GPMC_PHYS      OMAP34XX_GPMC_BASE
+                                                /* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT      (OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP34XX_GPMC_SIZE      SZ_1M
+
+#define OMAP343X_SMS_PHYS       OMAP343X_SMS_BASE
+                                                /* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT       (OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SMS_SIZE       SZ_1M
+
+#define OMAP343X_SDRC_PHYS      OMAP343X_SDRC_BASE
+                                                /* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT      (OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
+#define OMAP343X_SDRC_SIZE      SZ_1M
+
+/* 3430 IVA - currently unmapped */
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap4 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS            L3_44XX_BASE    /* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT            (L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
+#define L3_44XX_SIZE            SZ_1M
+
+#define L4_44XX_PHYS            L4_44XX_BASE    /* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT            (L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_44XX_SIZE            SZ_4M
+
+#define L4_PER_44XX_PHYS        L4_PER_44XX_BASE
+                                                /* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT        (L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_PER_44XX_SIZE        SZ_4M
+
+#define L4_ABE_44XX_PHYS        L4_ABE_44XX_BASE
+                                                /* 0x49000000 --> 0xfb000000 */
+#define L4_ABE_44XX_VIRT        (L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_ABE_44XX_SIZE        SZ_1M
+
+#define L4_EMU_44XX_PHYS        L4_EMU_44XX_BASE
+                                                /* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT        (L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE        SZ_8M
+
+#define OMAP44XX_GPMC_PHYS      OMAP44XX_GPMC_BASE
+                                                /* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT      (OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
+#define OMAP44XX_GPMC_SIZE      SZ_1M
+
+
+#define OMAP44XX_EMIF1_PHYS     OMAP44XX_EMIF1_BASE
+                                                /* 0x4c000000 --> 0xfd100000 */
+#define OMAP44XX_EMIF1_VIRT     (OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF1_SIZE     SZ_1M
+
+#define OMAP44XX_EMIF2_PHYS     OMAP44XX_EMIF2_BASE
+                                                /* 0x4d000000 --> 0xfd200000 */
+#define OMAP44XX_EMIF2_VIRT     (OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF2_SIZE     SZ_1M
+
+#define OMAP44XX_DMM_PHYS       OMAP44XX_DMM_BASE
+                                                /* 0x4e000000 --> 0xfd300000 */
+#define OMAP44XX_DMM_VIRT       (OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_DMM_SIZE       SZ_1M
+/*
+ * ----------------------------------------------------------------------------
+ * Omap specific register access
+ * ----------------------------------------------------------------------------
+ */
+
+#ifndef __ASSEMBLER__
+
+/*
+ * NOTE: Please use ioremap + __raw_read/write where possible instead of these
+ */
+
+extern u8 omap_readb(u32 pa);
+extern u16 omap_readw(u32 pa);
+extern u32 omap_readl(u32 pa);
+extern void omap_writeb(u8 v, u32 pa);
+extern void omap_writew(u16 v, u32 pa);
+extern void omap_writel(u32 v, u32 pa);
+
+struct omap_sdrc_params;
+
+extern void omap1_map_common_io(void);
+extern void omap1_init_common_hw(void);
+
+#ifdef CONFIG_SOC_OMAP2420
+extern void omap242x_map_common_io(void);
+#else
+static inline void omap242x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAP2430
+extern void omap243x_map_common_io(void);
+#else
+static inline void omap243x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP3
+extern void omap34xx_map_common_io(void);
+#else
+static inline void omap34xx_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_SOC_OMAPTI816X
+extern void omapti816x_map_common_io(void);
+#else
+static inline void omapti816x_map_common_io(void)
+{
+}
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+extern void omap44xx_map_common_io(void);
+#else
+static inline void omap44xx_map_common_io(void)
+{
+}
+#endif
+
+extern void omap2_init_common_infrastructure(void);
+extern void omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0,
+                                      struct omap_sdrc_params *sdrc_cs1);
+
+#define __arch_ioremap  omap_ioremap
+#define __arch_iounmap  omap_iounmap
+
+void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
+void omap_iounmap(volatile void __iomem *addr);
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
new file mode 100644
index 00000000000..7a6ec98a08e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -0,0 +1,180 @@
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+        u32 da;
+        u32 pa;
+        u32 pgsz, prsvd, valid;
+        union {
+                u16 ap;
+                struct {
+                        u32 endian, elsz, mixed;
+                };
+        };
+};
+
+struct omap_iommu {
+        const char      *name;
+        struct module   *owner;
+        struct clk      *clk;
+        void __iomem    *regbase;
+        struct device   *dev;
+        void            *isr_priv;
+        struct iommu_domain *domain;
+
+        unsigned int    refcount;
+        spinlock_t      iommu_lock;     /* global for this whole object */
+
+        /*
+         * We don't change iopgd for a situation like pgd for a task,
+         * but share it globally for each iommu.
+         */
+        u32             *iopgd;
+        spinlock_t      page_table_lock; /* protect iopgd */
+
+        int             nr_tlb_entries;
+
+        struct list_head        mmap;
+        struct mutex            mmap_lock; /* protect mmap */
+
+        void *ctx; /* iommu context: registres saved area */
+        u32 da_start;
+        u32 da_end;
+};
+
+struct cr_regs {
+        union {
+                struct {
+                        u16 cam_l;
+                        u16 cam_h;
+                };
+                u32 cam;
+        };
+        union {
+                struct {
+                        u16 ram_l;
+                        u16 ram_h;
+                };
+                u32 ram;
+        };
+};
+
+struct iotlb_lock {
+        short base;
+        short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+        unsigned long   version;
+
+        int (*enable)(struct omap_iommu *obj);
+        void (*disable)(struct omap_iommu *obj);
+        void (*set_twl)(struct omap_iommu *obj, bool on);
+        u32 (*fault_isr)(struct omap_iommu *obj, u32 *ra);
+
+        void (*tlb_read_cr)(struct omap_iommu *obj, struct cr_regs *cr);
+        void (*tlb_load_cr)(struct omap_iommu *obj, struct cr_regs *cr);
+
+        struct cr_regs *(*alloc_cr)(struct omap_iommu *obj,
+                                                        struct iotlb_entry *e);
+        int (*cr_valid)(struct cr_regs *cr);
+        u32 (*cr_to_virt)(struct cr_regs *cr);
+        void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+        ssize_t (*dump_cr)(struct omap_iommu *obj, struct cr_regs *cr,
+                                                        char *buf);
+
+        u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+        void (*save_ctx)(struct omap_iommu *obj);
+        void (*restore_ctx)(struct omap_iommu *obj);
+        ssize_t (*dump_ctx)(struct omap_iommu *obj, char *buf, ssize_t len);
+};
+
+struct iommu_platform_data {
+        const char *name;
+        const char *clk_name;
+        const int nr_tlb_entries;
+        u32 da_start;
+        u32 da_end;
+};
+
+/* IOMMU errors */
+#define OMAP_IOMMU_ERR_TLB_MISS         (1 << 0)
+#define OMAP_IOMMU_ERR_TRANS_FAULT      (1 << 1)
+#define OMAP_IOMMU_ERR_EMU_MISS         (1 << 2)
+#define OMAP_IOMMU_ERR_TBLWALK_FAULT    (1 << 3)
+#define OMAP_IOMMU_ERR_MULTIHIT_FAULT   (1 << 4)
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <plat/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes)                       \
+        (((bytes) >= SZ_16M) ? SZ_16M :         \
+         ((bytes) >= SZ_1M)  ? SZ_1M  :         \
+         ((bytes) >= SZ_64K) ? SZ_64K :         \
+         ((bytes) >= SZ_4K)  ? SZ_4K  : 0)
+
+#define bytes_to_iopgsz(bytes)                          \
+        (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M :       \
+         ((bytes) == SZ_1M)  ? MMU_CAM_PGSZ_1M  :       \
+         ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K :       \
+         ((bytes) == SZ_4K)  ? MMU_CAM_PGSZ_4K  : -1)
+
+#define iopgsz_to_bytes(iopgsz)                         \
+        (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M :      \
+         ((iopgsz) == MMU_CAM_PGSZ_1M)  ? SZ_1M  :      \
+         ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K :      \
+         ((iopgsz) == MMU_CAM_PGSZ_4K)  ? SZ_4K  : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 omap_iommu_arch_version(void);
+
+extern void omap_iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+
+extern int
+omap_iopgtable_store_entry(struct omap_iommu *obj, struct iotlb_entry *e);
+
+extern int omap_iommu_set_isr(const char *name,
+                 int (*isr)(struct omap_iommu *obj, u32 da, u32 iommu_errs,
+                                    void *priv),
+                         void *isr_priv);
+
+extern void omap_iommu_save_ctx(struct device *dev);
+extern void omap_iommu_restore_ctx(struct device *dev);
+
+extern int omap_install_iommu_arch(const struct iommu_functions *ops);
+extern void omap_uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int omap_foreach_iommu_device(void *data,
+                                int (*fn)(struct device *, void *));
+
+extern ssize_t
+omap_iommu_dump_ctx(struct omap_iommu *obj, char *buf, ssize_t len);
+extern size_t
+omap_dump_tlb_entries(struct omap_iommu *obj, char *buf, ssize_t len);
+
+#endif /* __MACH_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/plat/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
new file mode 100644
index 00000000000..d4116b595e4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/iommu2.h
@@ -0,0 +1,96 @@
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION            0x00
+#define MMU_SYSCONFIG           0x10
+#define MMU_SYSSTATUS           0x14
+#define MMU_IRQSTATUS           0x18
+#define MMU_IRQENABLE           0x1c
+#define MMU_WALKING_ST          0x40
+#define MMU_CNTL                0x44
+#define MMU_FAULT_AD            0x48
+#define MMU_TTB                 0x4c
+#define MMU_LOCK                0x50
+#define MMU_LD_TLB              0x54
+#define MMU_CAM                 0x58
+#define MMU_RAM                 0x5c
+#define MMU_GFLUSH              0x60
+#define MMU_FLUSH_ENTRY         0x64
+#define MMU_READ_CAM            0x68
+#define MMU_READ_RAM            0x6c
+#define MMU_EMU_FAULT_AD        0x70
+
+#define MMU_REG_SIZE            256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT     10
+#define MMU_LOCK_BASE_MASK      (0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x)        \
+        ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT     4
+#define MMU_LOCK_VICT_MASK      (0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x)        \
+        ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT     12
+#define MMU_CAM_VATAG_MASK \
+        ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P               (1 << 3)
+#define MMU_CAM_V               (1 << 2)
+#define MMU_CAM_PGSZ_MASK       3
+#define MMU_CAM_PGSZ_1M         (0 << 0)
+#define MMU_CAM_PGSZ_64K        (1 << 0)
+#define MMU_CAM_PGSZ_4K         (2 << 0)
+#define MMU_CAM_PGSZ_16M        (3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT     12
+#define MMU_RAM_PADDR_MASK \
+        ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT    9
+#define MMU_RAM_ENDIAN_MASK     (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG      (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE   (0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT      7
+#define MMU_RAM_ELSZ_MASK       (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8          (0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16         (1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32         (2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE       (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT     6
+#define MMU_RAM_MIXED_MASK      (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED           MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct omap_iommu *obj, size_t offs)
+{
+        return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct omap_iommu *obj, u32 val, size_t offs)
+{
+        __raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
diff --git a/arch/arm/plat-omap/include/plat/iopgtable.h b/arch/arm/plat-omap/include/plat/iopgtable.h
new file mode 100644
index 00000000000..e0c56aafc2e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/iopgtable.h
@@ -0,0 +1,102 @@
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2010 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+/*
+ * "L2 table" address mask and size definitions.
+ */
+#define IOPGD_SHIFT             20
+#define IOPGD_SIZE              (1UL << IOPGD_SHIFT)
+#define IOPGD_MASK              (~(IOPGD_SIZE - 1))
+
+/*
+ * "section" address mask and size definitions.
+ */
+#define IOSECTION_SHIFT         20
+#define IOSECTION_SIZE          (1UL << IOSECTION_SHIFT)
+#define IOSECTION_MASK          (~(IOSECTION_SIZE - 1))
+
+/*
+ * "supersection" address mask and size definitions.
+ */
+#define IOSUPER_SHIFT           24
+#define IOSUPER_SIZE            (1UL << IOSUPER_SHIFT)
+#define IOSUPER_MASK            (~(IOSUPER_SIZE - 1))
+
+#define PTRS_PER_IOPGD          (1UL << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE        (PTRS_PER_IOPGD * sizeof(u32))
+
+/*
+ * "small page" address mask and size definitions.
+ */
+#define IOPTE_SHIFT             12
+#define IOPTE_SIZE              (1UL << IOPTE_SHIFT)
+#define IOPTE_MASK              (~(IOPTE_SIZE - 1))
+
+/*
+ * "large page" address mask and size definitions.
+ */
+#define IOLARGE_SHIFT           16
+#define IOLARGE_SIZE            (1UL << IOLARGE_SHIFT)
+#define IOLARGE_MASK            (~(IOLARGE_SIZE - 1))
+
+#define PTRS_PER_IOPTE          (1UL << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE        (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOPAGE_MASK             IOPTE_MASK
+
+/*
+ * some descriptor attributes.
+ */
+#define IOPGD_TABLE             (1 << 0)
+#define IOPGD_SECTION           (2 << 0)
+#define IOPGD_SUPER             (1 << 18 | 2 << 0)
+
+#define iopgd_is_table(x)       (((x) & 3) == IOPGD_TABLE)
+
+#define IOPTE_SMALL             (2 << 0)
+#define IOPTE_LARGE             (1 << 0)
+
+/* to find an entry in a page-table-directory */
+#define iopgd_index(da)         (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da)   ((obj)->iopgd + iopgd_index(da))
+
+#define iopgd_page_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
+#define iopgd_page_vaddr(iopgd) ((u32 *)phys_to_virt(iopgd_page_paddr(iopgd)))
+
+/* to find an entry in the second-level page table. */
+#define iopte_index(da)         (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da) (iopgd_page_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+                                   u32 flags)
+{
+        memset(e, 0, sizeof(*e));
+
+        e->da           = da;
+        e->pa           = pa;
+        e->valid        = 1;
+        /* FIXME: add OMAP1 support */
+        e->pgsz         = flags & MMU_CAM_PGSZ_MASK;
+        e->endian       = flags & MMU_RAM_ENDIAN_MASK;
+        e->elsz         = flags & MMU_RAM_ELSZ_MASK;
+        e->mixed        = flags & MMU_RAM_MIXED_MASK;
+
+        return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev)                                                   \
+        (struct omap_iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
diff --git a/arch/arm/plat-omap/include/plat/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
new file mode 100644
index 00000000000..498e57cda6c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
@@ -0,0 +1,89 @@
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+#include <linux/iommu.h>
+
+struct iovm_struct {
+        struct omap_iommu       *iommu; /* iommu object which this belongs to */
+        u32                     da_start; /* area definition */
+        u32                     da_end;
+        u32                     flags; /* IOVMF_: see below */
+        struct list_head        list; /* linked in ascending order */
+        const struct sg_table   *sgt; /* keep 'page' <-> 'da' mapping */
+        void                    *va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT          16
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK          (~((1 << 10) - 1))
+#define IOVMF_RAM_MASK          (~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK         (3 << 0)
+#define IOVMF_PGSZ_1M           MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K          MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K           MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M          MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK       (1 << 9)
+#define IOVMF_ENDIAN_BIG        MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE     MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK         (3 << 7)
+#define IOVMF_ELSZ_8            MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16           MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32           MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE         MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK        (1 << 6)
+#define IOVMF_MIXED             MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO              (1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC             (2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK        (3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT           (1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR            (2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK       (3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED          (1 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *omap_find_iovm_area(struct device *dev, u32 da);
+extern u32
+omap_iommu_vmap(struct iommu_domain *domain, struct device *dev, u32 da,
+                        const struct sg_table *sgt, u32 flags);
+extern struct sg_table *omap_iommu_vunmap(struct iommu_domain *domain,
+                                struct device *dev, u32 da);
+extern u32
+omap_iommu_vmalloc(struct iommu_domain *domain, struct device *dev,
+                                u32 da, size_t bytes, u32 flags);
+extern void
+omap_iommu_vfree(struct iommu_domain *domain, struct device *dev,
+                                const u32 da);
+extern void *omap_da_to_va(struct device *dev, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
diff --git a/arch/arm/plat-omap/include/plat/irda.h b/arch/arm/plat-omap/include/plat/irda.h
new file mode 100644
index 00000000000..40f60339d1c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/irda.h
@@ -0,0 +1,33 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irda.h
+ *
+ *  Copyright (C) 2005-2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_SEL          1       /* Selects IrDA */
+#define IR_SIRMODE      2
+#define IR_FIRMODE      4
+#define IR_MIRMODE      8
+
+struct omap_irda_config {
+        int transceiver_cap;
+        int (*transceiver_mode)(struct device *dev, int mode);
+        int (*select_irda)(struct device *dev, int state);
+        int rx_channel;
+        int tx_channel;
+        unsigned long dest_start;
+        unsigned long src_start;
+        int tx_trigger;
+        int rx_trigger;
+        int mode;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs-44xx.h b/arch/arm/plat-omap/include/plat/irqs-44xx.h
new file mode 100644
index 00000000000..518322c8011
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/irqs-44xx.h
@@ -0,0 +1,144 @@
+/*
+ * OMAP4 Interrupt lines definitions
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Santosh Shilimkar (santosh.shilimkar@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+#define __ARCH_ARM_MACH_OMAP2_OMAP44XX_IRQS_H
+
+/* OMAP44XX IRQs numbers definitions */
+#define OMAP44XX_IRQ_LOCALTIMER                 29
+#define OMAP44XX_IRQ_LOCALWDT                   30
+
+#define OMAP44XX_IRQ_GIC_START                  32
+
+#define OMAP44XX_IRQ_PL310                      (0 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI0                       (1 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CTI1                       (2 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ELM                        (4 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_1N                     (7 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SECURITY_EVENTS            (8 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_DBG                     (9 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_L3_APP                     (10 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PRCM                       (11 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_0                     (12 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_1                     (13 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_2                     (14 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SDMA_3                     (15 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP4                     (16 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP1                     (17 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_MCU                     (18 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_CORE                    (19 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPMC                       (20 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GFX                        (21 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP2                     (22 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCBSP3                     (23 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ISS_5                      (24 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DISPC                  (25 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MAIL_U0                    (26 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_0                 (27 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TESLA_MMU                  (28 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO1                      (29 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO2                      (30 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO3                      (31 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO4                      (32 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO5                      (33 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPIO6                      (34 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_USIM                       (35 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT3                       (36 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT1                       (37 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT2                       (38 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT3                       (39 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT4                       (40 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT5                       (41 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT6                       (42 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT7                       (43 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT8                       (44 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT9                       (45 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT10                      (46 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT11                      (47 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI4                       (48 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_S                     (49 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FPKA_SINTREQUEST_S         (50 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SHA1_P                     (51 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_RNG                        (52 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI1                   (53 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C1                       (56 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C2                       (57 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HDQ                        (58 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC5                       (59 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C3                       (61 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_I2C4                       (62 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_S                     (63 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES2_P                     (64 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI1                       (65 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI2                       (66 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P1                     (67 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_P2                     (68 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FDIF_3                     (69 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART4                      (70 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HSI_DMA                    (71 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART1                      (72 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART2                      (73 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UART3                      (74 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_PBIAS                      (75 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_OHCI                       (76 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EHCI                       (77 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_TLL                        (78 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_S                     (79 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_WDT2                       (80 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_S                      (81 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DES_P                      (82 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC1                       (83 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_DSI2                   (84 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_AES1_P                     (85 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC2                       (86 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MPU_ICR                    (87 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_C2C_SSCM_1                 (88 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB                      (89 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_FSUSB_SMI                  (90 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SPI3                       (91 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_MC_N                (92 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_HS_USB_DMA_N               (93 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC3                       (94 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_GPT12                      (95 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MMC4                       (96 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS1                   (97 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SLIMBUS2                   (98 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_ABE                        (99 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DUCATI_MMU                 (100 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DSS_HDMI                   (101 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SR_IVA                     (102 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_1     (103 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POSYNCITRPEND_0     (104 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_IVA_HD_POMBINTRPEND_0      (107 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AR                  (108 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCASP1_AX                  (109 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_1                    (110 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_EMIF4_2                    (111 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_MCPDM                      (112 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMM                        (113 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_DMIC                       (114 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_0                     (115 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_1                     (116 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_2                     (117 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_CDMA_3                     (118 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_SYS_2N                     (119 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_KBD_CTL                    (120 + OMAP44XX_IRQ_GIC_START)
+#define OMAP44XX_IRQ_UNIPRO1                    (124 + OMAP44XX_IRQ_GIC_START)
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
new file mode 100644
index 00000000000..30e10719b77
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -0,0 +1,459 @@
+/*
+ *  arch/arm/plat-omap/include/mach/irqs.h
+ *
+ *  Copyright (C) Greg Lonnon 2001
+ *  Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: The interrupt vectors for the OMAP-1509, OMAP-1510, and OMAP-1610
+ *       are different.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_IRQS_H
+#define __ASM_ARCH_OMAP15XX_IRQS_H
+
+/* All OMAP4 specific defines are moved to irqs-44xx.h */
+#include "irqs-44xx.h"
+
+/*
+ * IRQ numbers for interrupt handler 1
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ *
+ */
+#define INT_CAMERA              1
+#define INT_FIQ                 3
+#define INT_RTDX                6
+#define INT_DSP_MMU_ABORT       7
+#define INT_HOST                8
+#define INT_ABORT               9
+#define INT_BRIDGE_PRIV         13
+#define INT_GPIO_BANK1          14
+#define INT_UART3               15
+#define INT_TIMER3              16
+#define INT_DMA_CH0_6           19
+#define INT_DMA_CH1_7           20
+#define INT_DMA_CH2_8           21
+#define INT_DMA_CH3             22
+#define INT_DMA_CH4             23
+#define INT_DMA_CH5             24
+#define INT_DMA_LCD             25
+#define INT_TIMER1              26
+#define INT_WD_TIMER            27
+#define INT_BRIDGE_PUB          28
+#define INT_TIMER2              30
+#define INT_LCD_CTRL            31
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1510_IH2_IRQ        0
+#define INT_1510_RES2           2
+#define INT_1510_SPI_TX         4
+#define INT_1510_SPI_RX         5
+#define INT_1510_DSP_MAILBOX1   10
+#define INT_1510_DSP_MAILBOX2   11
+#define INT_1510_RES12          12
+#define INT_1510_LB_MMU         17
+#define INT_1510_RES18          18
+#define INT_1510_LOCAL_BUS      29
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 1
+ */
+#define INT_1610_IH2_IRQ        INT_1510_IH2_IRQ
+#define INT_1610_IH2_FIQ        2
+#define INT_1610_McBSP2_TX      4
+#define INT_1610_McBSP2_RX      5
+#define INT_1610_DSP_MAILBOX1   10
+#define INT_1610_DSP_MAILBOX2   11
+#define INT_1610_LCD_LINE       12
+#define INT_1610_GPTIMER1       17
+#define INT_1610_GPTIMER2       18
+#define INT_1610_SSR_FIFO_0     29
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
+ */
+#define INT_7XX_IH2_FIQ         0
+#define INT_7XX_IH2_IRQ         1
+#define INT_7XX_USB_NON_ISO     2
+#define INT_7XX_USB_ISO         3
+#define INT_7XX_ICR             4
+#define INT_7XX_EAC             5
+#define INT_7XX_GPIO_BANK1      6
+#define INT_7XX_GPIO_BANK2      7
+#define INT_7XX_GPIO_BANK3      8
+#define INT_7XX_McBSP2TX        10
+#define INT_7XX_McBSP2RX        11
+#define INT_7XX_McBSP2RX_OVF    12
+#define INT_7XX_LCD_LINE        14
+#define INT_7XX_GSM_PROTECT     15
+#define INT_7XX_TIMER3          16
+#define INT_7XX_GPIO_BANK5      17
+#define INT_7XX_GPIO_BANK6      18
+#define INT_7XX_SPGIO_WR        29
+
+/*
+ * IRQ numbers for interrupt handler 2
+ *
+ * NOTE: See also the OMAP-1510 and 1610 specific IRQ numbers below
+ */
+#define IH2_BASE                32
+
+#define INT_KEYBOARD            (1 + IH2_BASE)
+#define INT_uWireTX             (2 + IH2_BASE)
+#define INT_uWireRX             (3 + IH2_BASE)
+#define INT_I2C                 (4 + IH2_BASE)
+#define INT_MPUIO               (5 + IH2_BASE)
+#define INT_USB_HHC_1           (6 + IH2_BASE)
+#define INT_McBSP3TX            (10 + IH2_BASE)
+#define INT_McBSP3RX            (11 + IH2_BASE)
+#define INT_McBSP1TX            (12 + IH2_BASE)
+#define INT_McBSP1RX            (13 + IH2_BASE)
+#define INT_UART1               (14 + IH2_BASE)
+#define INT_UART2               (15 + IH2_BASE)
+#define INT_BT_MCSI1TX          (16 + IH2_BASE)
+#define INT_BT_MCSI1RX          (17 + IH2_BASE)
+#define INT_SOSSI_MATCH         (19 + IH2_BASE)
+#define INT_USB_W2FC            (20 + IH2_BASE)
+#define INT_1WIRE               (21 + IH2_BASE)
+#define INT_OS_TIMER            (22 + IH2_BASE)
+#define INT_MMC                 (23 + IH2_BASE)
+#define INT_GAUGE_32K           (24 + IH2_BASE)
+#define INT_RTC_TIMER           (25 + IH2_BASE)
+#define INT_RTC_ALARM           (26 + IH2_BASE)
+#define INT_MEM_STICK           (27 + IH2_BASE)
+
+/*
+ * OMAP-1510 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1510_DSP_MMU        (28 + IH2_BASE)
+#define INT_1510_COM_SPI_RO     (31 + IH2_BASE)
+
+/*
+ * OMAP-1610 specific IRQ numbers for interrupt handler 2
+ */
+#define INT_1610_FAC            (0 + IH2_BASE)
+#define INT_1610_USB_HHC_2      (7 + IH2_BASE)
+#define INT_1610_USB_OTG        (8 + IH2_BASE)
+#define INT_1610_SoSSI          (9 + IH2_BASE)
+#define INT_1610_SoSSI_MATCH    (19 + IH2_BASE)
+#define INT_1610_DSP_MMU        (28 + IH2_BASE)
+#define INT_1610_McBSP2RX_OF    (31 + IH2_BASE)
+#define INT_1610_STI            (32 + IH2_BASE)
+#define INT_1610_STI_WAKEUP     (33 + IH2_BASE)
+#define INT_1610_GPTIMER3       (34 + IH2_BASE)
+#define INT_1610_GPTIMER4       (35 + IH2_BASE)
+#define INT_1610_GPTIMER5       (36 + IH2_BASE)
+#define INT_1610_GPTIMER6       (37 + IH2_BASE)
+#define INT_1610_GPTIMER7       (38 + IH2_BASE)
+#define INT_1610_GPTIMER8       (39 + IH2_BASE)
+#define INT_1610_GPIO_BANK2     (40 + IH2_BASE)
+#define INT_1610_GPIO_BANK3     (41 + IH2_BASE)
+#define INT_1610_MMC2           (42 + IH2_BASE)
+#define INT_1610_CF             (43 + IH2_BASE)
+#define INT_1610_WAKE_UP_REQ    (46 + IH2_BASE)
+#define INT_1610_GPIO_BANK4     (48 + IH2_BASE)
+#define INT_1610_SPI            (49 + IH2_BASE)
+#define INT_1610_DMA_CH6        (53 + IH2_BASE)
+#define INT_1610_DMA_CH7        (54 + IH2_BASE)
+#define INT_1610_DMA_CH8        (55 + IH2_BASE)
+#define INT_1610_DMA_CH9        (56 + IH2_BASE)
+#define INT_1610_DMA_CH10       (57 + IH2_BASE)
+#define INT_1610_DMA_CH11       (58 + IH2_BASE)
+#define INT_1610_DMA_CH12       (59 + IH2_BASE)
+#define INT_1610_DMA_CH13       (60 + IH2_BASE)
+#define INT_1610_DMA_CH14       (61 + IH2_BASE)
+#define INT_1610_DMA_CH15       (62 + IH2_BASE)
+#define INT_1610_NAND           (63 + IH2_BASE)
+#define INT_1610_SHA1MD5        (91 + IH2_BASE)
+
+/*
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
+ */
+#define INT_7XX_HW_ERRORS       (0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL   (1 + IH2_BASE)
+#define INT_7XX_CFCD            (2 + IH2_BASE)
+#define INT_7XX_CFIREQ          (3 + IH2_BASE)
+#define INT_7XX_I2C             (4 + IH2_BASE)
+#define INT_7XX_PCC             (5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ    (6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1      (7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI       (8 + IH2_BASE)
+#define INT_7XX_VLYNQ           (9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4      (10 + IH2_BASE)
+#define INT_7XX_McBSP1TX        (11 + IH2_BASE)
+#define INT_7XX_McBSP1RX        (12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF     (13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1    (15 + IH2_BASE)
+#define INT_7XX_MCSI            (16 + IH2_BASE)
+#define INT_7XX_uWireTX         (17 + IH2_BASE)
+#define INT_7XX_uWireRX         (18 + IH2_BASE)
+#define INT_7XX_SMC_CD          (19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ        (20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE       (21 + IH2_BASE)
+#define INT_7XX_TIMER32K        (22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO        (23 + IH2_BASE)
+#define INT_7XX_UPLD            (24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1       (27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2       (28 + IH2_BASE)
+#define INT_7XX_USB_GENI        (29 + IH2_BASE)
+#define INT_7XX_USB_OTG         (30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF       (31 + IH2_BASE)
+#define INT_7XX_RNG             (32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN       (34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD    (35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5        (36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2      (37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE        (38 + IH2_BASE)
+#define INT_7XX_MPUIO           (39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF        (40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING  (42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC      (43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ     (46 + IH2_BASE)
+#define INT_7XX_DMA_CH6         (53 + IH2_BASE)
+#define INT_7XX_DMA_CH7         (54 + IH2_BASE)
+#define INT_7XX_DMA_CH8         (55 + IH2_BASE)
+#define INT_7XX_DMA_CH9         (56 + IH2_BASE)
+#define INT_7XX_DMA_CH10        (57 + IH2_BASE)
+#define INT_7XX_DMA_CH11        (58 + IH2_BASE)
+#define INT_7XX_DMA_CH12        (59 + IH2_BASE)
+#define INT_7XX_DMA_CH13        (60 + IH2_BASE)
+#define INT_7XX_DMA_CH14        (61 + IH2_BASE)
+#define INT_7XX_DMA_CH15        (62 + IH2_BASE)
+#define INT_7XX_NAND            (63 + IH2_BASE)
+
+#define INT_24XX_SYS_NIRQ       7
+#define INT_24XX_SDMA_IRQ0      12
+#define INT_24XX_SDMA_IRQ1      13
+#define INT_24XX_SDMA_IRQ2      14
+#define INT_24XX_SDMA_IRQ3      15
+#define INT_24XX_CAM_IRQ        24
+#define INT_24XX_DSS_IRQ        25
+#define INT_24XX_MAIL_U0_MPU    26
+#define INT_24XX_DSP_UMA        27
+#define INT_24XX_DSP_MMU        28
+#define INT_24XX_GPIO_BANK1     29
+#define INT_24XX_GPIO_BANK2     30
+#define INT_24XX_GPIO_BANK3     31
+#define INT_24XX_GPIO_BANK4     32
+#define INT_24XX_GPIO_BANK5     33
+#define INT_24XX_MAIL_U3_MPU    34
+#define INT_24XX_GPTIMER1       37
+#define INT_24XX_GPTIMER2       38
+#define INT_24XX_GPTIMER3       39
+#define INT_24XX_GPTIMER4       40
+#define INT_24XX_GPTIMER5       41
+#define INT_24XX_GPTIMER6       42
+#define INT_24XX_GPTIMER7       43
+#define INT_24XX_GPTIMER8       44
+#define INT_24XX_GPTIMER9       45
+#define INT_24XX_GPTIMER10      46
+#define INT_24XX_GPTIMER11      47
+#define INT_24XX_GPTIMER12      48
+#define INT_24XX_SHA1MD5        51
+#define INT_24XX_MCBSP4_IRQ_TX  54
+#define INT_24XX_MCBSP4_IRQ_RX  55
+#define INT_24XX_I2C1_IRQ       56
+#define INT_24XX_I2C2_IRQ       57
+#define INT_24XX_HDQ_IRQ        58
+#define INT_24XX_MCBSP1_IRQ_TX  59
+#define INT_24XX_MCBSP1_IRQ_RX  60
+#define INT_24XX_MCBSP2_IRQ_TX  62
+#define INT_24XX_MCBSP2_IRQ_RX  63
+#define INT_24XX_SPI1_IRQ       65
+#define INT_24XX_SPI2_IRQ       66
+#define INT_24XX_UART1_IRQ      72
+#define INT_24XX_UART2_IRQ      73
+#define INT_24XX_UART3_IRQ      74
+#define INT_24XX_USB_IRQ_GEN    75
+#define INT_24XX_USB_IRQ_NISO   76
+#define INT_24XX_USB_IRQ_ISO    77
+#define INT_24XX_USB_IRQ_HGEN   78
+#define INT_24XX_USB_IRQ_HSOF   79
+#define INT_24XX_USB_IRQ_OTG    80
+#define INT_24XX_MCBSP5_IRQ_TX  81
+#define INT_24XX_MCBSP5_IRQ_RX  82
+#define INT_24XX_MMC_IRQ        83
+#define INT_24XX_MMC2_IRQ       86
+#define INT_24XX_MCBSP3_IRQ_TX  89
+#define INT_24XX_MCBSP3_IRQ_RX  90
+#define INT_24XX_SPI3_IRQ       91
+
+#define INT_243X_MCBSP2_IRQ     16
+#define INT_243X_MCBSP3_IRQ     17
+#define INT_243X_MCBSP4_IRQ     18
+#define INT_243X_MCBSP5_IRQ     19
+#define INT_243X_MCBSP1_IRQ     64
+#define INT_243X_HS_USB_MC      92
+#define INT_243X_HS_USB_DMA     93
+#define INT_243X_CARKIT_IRQ     94
+
+#define INT_34XX_BENCH_MPU_EMUL 3
+#define INT_34XX_ST_MCBSP2_IRQ  4
+#define INT_34XX_ST_MCBSP3_IRQ  5
+#define INT_34XX_SSM_ABORT_IRQ  6
+#define INT_34XX_SYS_NIRQ       7
+#define INT_34XX_D2D_FW_IRQ     8
+#define INT_34XX_L3_DBG_IRQ     9
+#define INT_34XX_L3_APP_IRQ     10
+#define INT_34XX_PRCM_MPU_IRQ   11
+#define INT_34XX_MCBSP1_IRQ     16
+#define INT_34XX_MCBSP2_IRQ     17
+#define INT_34XX_GPMC_IRQ       20
+#define INT_34XX_MCBSP3_IRQ     22
+#define INT_34XX_MCBSP4_IRQ     23
+#define INT_34XX_CAM_IRQ        24
+#define INT_34XX_MCBSP5_IRQ     27
+#define INT_34XX_GPIO_BANK1     29
+#define INT_34XX_GPIO_BANK2     30
+#define INT_34XX_GPIO_BANK3     31
+#define INT_34XX_GPIO_BANK4     32
+#define INT_34XX_GPIO_BANK5     33
+#define INT_34XX_GPIO_BANK6     34
+#define INT_34XX_USIM_IRQ       35
+#define INT_34XX_WDT3_IRQ       36
+#define INT_34XX_SPI4_IRQ       48
+#define INT_34XX_SHA1MD52_IRQ   49
+#define INT_34XX_FPKA_READY_IRQ 50
+#define INT_34XX_SHA1MD51_IRQ   51
+#define INT_34XX_RNG_IRQ        52
+#define INT_34XX_I2C3_IRQ       61
+#define INT_34XX_FPKA_ERROR_IRQ 64
+#define INT_34XX_PBIAS_IRQ      75
+#define INT_34XX_OHCI_IRQ       76
+#define INT_34XX_EHCI_IRQ       77
+#define INT_34XX_TLL_IRQ        78
+#define INT_34XX_PARTHASH_IRQ   79
+#define INT_34XX_MMC3_IRQ       94
+#define INT_34XX_GPT12_IRQ      95
+
+#define INT_36XX_UART4_IRQ      80
+
+#define INT_35XX_HECC0_IRQ              24
+#define INT_35XX_HECC1_IRQ              28
+#define INT_35XX_EMAC_C0_RXTHRESH_IRQ   67
+#define INT_35XX_EMAC_C0_RX_PULSE_IRQ   68
+#define INT_35XX_EMAC_C0_TX_PULSE_IRQ   69
+#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
+#define INT_35XX_USBOTG_IRQ             71
+#define INT_35XX_UART4                  84
+#define INT_35XX_CCDC_VD0_IRQ           88
+#define INT_35XX_CCDC_VD1_IRQ           92
+#define INT_35XX_CCDC_VD2_IRQ           93
+
+/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
+ * 16 MPUIO lines */
+#define OMAP_MAX_GPIO_LINES     192
+#define IH_GPIO_BASE            (128 + IH2_BASE)
+#define IH_MPUIO_BASE           (OMAP_MAX_GPIO_LINES + IH_GPIO_BASE)
+#define OMAP_IRQ_END            (IH_MPUIO_BASE + 16)
+
+/* External FPGA handles interrupts on Innovator boards */
+#define OMAP_FPGA_IRQ_BASE      (OMAP_IRQ_END)
+#ifdef  CONFIG_MACH_OMAP_INNOVATOR
+#define OMAP_FPGA_NR_IRQS       24
+#else
+#define OMAP_FPGA_NR_IRQS       0
+#endif
+#define OMAP_FPGA_IRQ_END       (OMAP_FPGA_IRQ_BASE + OMAP_FPGA_NR_IRQS)
+
+/* External TWL4030 can handle interrupts on 2430 and 34xx boards */
+#define TWL4030_IRQ_BASE        (OMAP_FPGA_IRQ_END)
+#ifdef  CONFIG_TWL4030_CORE
+#define TWL4030_BASE_NR_IRQS    8
+#define TWL4030_PWR_NR_IRQS     8
+#else
+#define TWL4030_BASE_NR_IRQS    0
+#define TWL4030_PWR_NR_IRQS     0
+#endif
+#define TWL4030_IRQ_END         (TWL4030_IRQ_BASE + TWL4030_BASE_NR_IRQS)
+#define TWL4030_PWR_IRQ_BASE    TWL4030_IRQ_END
+#define TWL4030_PWR_IRQ_END     (TWL4030_PWR_IRQ_BASE + TWL4030_PWR_NR_IRQS)
+
+/* External TWL4030 gpio interrupts are optional */
+#define TWL4030_GPIO_IRQ_BASE   TWL4030_PWR_IRQ_END
+#ifdef  CONFIG_GPIO_TWL4030
+#define TWL4030_GPIO_NR_IRQS    18
+#else
+#define TWL4030_GPIO_NR_IRQS    0
+#endif
+#define TWL4030_GPIO_IRQ_END    (TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
+
+#define TWL6030_IRQ_BASE        (OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define TWL6030_BASE_NR_IRQS    20
+#else
+#define TWL6030_BASE_NR_IRQS    0
+#endif
+#define TWL6030_IRQ_END         (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
+
+#define TWL6040_CODEC_IRQ_BASE  TWL6030_IRQ_END
+#ifdef CONFIG_TWL6040_CODEC
+#define TWL6040_CODEC_NR_IRQS   6
+#else
+#define TWL6040_CODEC_NR_IRQS   0
+#endif
+#define TWL6040_CODEC_IRQ_END   (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS)
+
+/* Total number of interrupts depends on the enabled blocks above */
+#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END)
+#define TWL_IRQ_END             TWL4030_GPIO_IRQ_END
+#else
+#define TWL_IRQ_END             TWL6040_CODEC_IRQ_END
+#endif
+
+/* GPMC related */
+#define OMAP_GPMC_IRQ_BASE      (TWL_IRQ_END)
+#define OMAP_GPMC_NR_IRQS       8
+#define OMAP_GPMC_IRQ_END       (OMAP_GPMC_IRQ_BASE + OMAP_GPMC_NR_IRQS)
+
+
+#define NR_IRQS                 OMAP_GPMC_IRQ_END
+
+#define OMAP_IRQ_BIT(irq)       (1 << ((irq) % 32))
+
+#define INTCPS_NR_MIR_REGS      3
+#define INTCPS_NR_IRQS          96
+
+#ifndef __ASSEMBLY__
+extern void __iomem *omap_irq_base;
+void omap1_init_irq(void);
+void omap2_init_irq(void);
+void omap3_init_irq(void);
+void ti816x_init_irq(void);
+extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
+#endif
+
+#include <mach/hardware.h>
+
+#ifdef CONFIG_FIQ
+#define FIQ_START               1024
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
new file mode 100644
index 00000000000..793ce9d5329
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/keypad.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/plat-omap/include/mach/keypad.h
+ *
+ *  Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_KEYPAD_H
+#define ASMARM_ARCH_KEYPAD_H
+
+#ifndef CONFIG_ARCH_OMAP1
+#warning Please update the board to use matrix-keypad driver
+#endif
+#include <linux/input/matrix_keypad.h>
+
+struct omap_kp_platform_data {
+        int rows;
+        int cols;
+        const struct matrix_keymap_data *keymap_data;
+        bool rep;
+        unsigned long delay;
+        bool dbounce;
+        /* specific to OMAP242x*/
+        unsigned int *row_gpios;
+        unsigned int *col_gpios;
+};
+
+/* Group (0..3) -- when multiple keys are pressed, only the
+ * keys pressed in the same group are considered as pressed. This is
+ * in order to workaround certain crappy HW designs that produce ghost
+ * keypresses. Two free bits, not used by neither row/col nor keynum,
+ * must be available for use as group bits. The below GROUP_SHIFT
+ * macro definition is based on some prior knowledge of the
+ * matrix_keypad defined KEY() macro internals.
+ */
+#define GROUP_SHIFT     14
+#define GROUP_0         (0 << GROUP_SHIFT)
+#define GROUP_1         (1 << GROUP_SHIFT)
+#define GROUP_2         (2 << GROUP_SHIFT)
+#define GROUP_3         (3 << GROUP_SHIFT)
+#define GROUP_MASK      GROUP_3
+#if KEY_MAX & GROUP_MASK
+#error Group bits in conflict with keynum bits
+#endif
+
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/plat/l3_2xxx.h b/arch/arm/plat-omap/include/plat/l3_2xxx.h
new file mode 100644
index 00000000000..b8b5641379b
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l3_2xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_2xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *      Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_2XXX_H
+
+/* L3 CONNIDs */
+/* Display Sub system (DSS) */
+#define OMAP2_L3_CORE_FW_CONNID_DSS                     8
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l3_3xxx.h b/arch/arm/plat-omap/include/plat/l3_3xxx.h
new file mode 100644
index 00000000000..cde1938c5f8
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l3_3xxx.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/plat-omap/include/plat/l3_3xxx.h - L3 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *      Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L3_3XXX_H
+
+/* L3 Initiator IDs */
+/* Display Sub system (DSS) */
+#define OMAP3_L3_CORE_FW_INIT_ID_DSS                    29
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_2xxx.h b/arch/arm/plat-omap/include/plat/l4_2xxx.h
new file mode 100644
index 00000000000..3f39cf8a35c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_2xxx.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/plat-omap/include/plat/l4_2xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
+ *      Sumit Semwal
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_L4_2XXX_H
+
+/* L4 CORE */
+/* Display Sub system (DSS) */
+#define OMAP2420_L4_CORE_FW_DSS_CORE_REGION                     28
+#define OMAP2420_L4_CORE_FW_DSS_DISPC_REGION                    29
+#define OMAP2420_L4_CORE_FW_DSS_RFBI_REGION                     30
+#define OMAP2420_L4_CORE_FW_DSS_VENC_REGION                     31
+#define OMAP2420_L4_CORE_FW_DSS_TA_REGION                       32
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/l4_3xxx.h b/arch/arm/plat-omap/include/plat/l4_3xxx.h
new file mode 100644
index 00000000000..881a858b1ff
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/l4_3xxx.h
@@ -0,0 +1,34 @@
+/*
+ * arch/arm/plat-omap/include/mach/l4_3xxx.h - L4 firewall definitions
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_L4_3XXX_H
+
+/* L4 CORE */
+#define OMAP3_L4_CORE_FW_I2C1_REGION                            21
+#define OMAP3_L4_CORE_FW_I2C1_TA_REGION                         22
+#define OMAP3_L4_CORE_FW_I2C2_REGION                            23
+#define OMAP3_L4_CORE_FW_I2C2_TA_REGION                         24
+#define OMAP3_L4_CORE_FW_I2C3_REGION                            73
+#define OMAP3_L4_CORE_FW_I2C3_TA_REGION                         74
+
+/* Display Sub system (DSS) */
+#define OMAP3_L4_CORE_FW_DSS_PROT_GROUP                         2
+
+#define OMAP3_L4_CORE_FW_DSS_DSI_REGION                         104
+#define OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION                     3
+#define OMAP3_L4_CORE_FW_DSS_CORE_REGION                        4
+#define OMAP3_L4_CORE_FW_DSS_DISPC_REGION                       4
+#define OMAP3_L4_CORE_FW_DSS_RFBI_REGION                        5
+#define OMAP3_L4_CORE_FW_DSS_VENC_REGION                        6
+#define OMAP3_L4_CORE_FW_DSS_TA_REGION                          7
+#endif
diff --git a/arch/arm/plat-omap/include/plat/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
new file mode 100644
index 00000000000..8e52c657228
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/lcd_mipid.h
@@ -0,0 +1,29 @@
+#ifndef __LCD_MIPID_H
+#define __LCD_MIPID_H
+
+enum mipid_test_num {
+        MIPID_TEST_RGB_LINES,
+};
+
+enum mipid_test_result {
+        MIPID_TEST_SUCCESS,
+        MIPID_TEST_INVALID,
+        MIPID_TEST_FAILED,
+};
+
+#ifdef __KERNEL__
+
+struct mipid_platform_data {
+        int     nreset_gpio;
+        int     data_lines;
+
+        void    (*shutdown)(struct mipid_platform_data *pdata);
+        void    (*set_bklight_level)(struct mipid_platform_data *pdata,
+                                     int level);
+        int     (*get_bklight_level)(struct mipid_platform_data *pdata);
+        int     (*get_bklight_max)(struct mipid_platform_data *pdata);
+};
+
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/led.h b/arch/arm/plat-omap/include/plat/led.h
new file mode 100644
index 00000000000..25e451e7e2f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/led.h
@@ -0,0 +1,24 @@
+/*
+ *  arch/arm/plat-omap/include/mach/led.h
+ *
+ *  Copyright (C) 2006 Samsung Electronics
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ASMARM_ARCH_LED_H
+#define ASMARM_ARCH_LED_H
+
+struct omap_led_config {
+        struct led_classdev     cdev;
+        s16                     gpio;
+};
+
+struct omap_led_platform_data {
+        s16                     nr_leds;
+        struct omap_led_config  *leds;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
new file mode 100644
index 00000000000..9882c657b2d
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -0,0 +1,473 @@
+/*
+ * arch/arm/plat-omap/include/mach/mcbsp.h
+ *
+ * Defines for Multi-Channel Buffered Serial Port
+ *
+ * Copyright (C) 2002 RidgeRun, Inc.
+ * Author: Steve Johnson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_OMAP_MCBSP_H
+#define __ASM_ARCH_OMAP_MCBSP_H
+
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
+#include <plat/clock.h>
+
+/* macro for building platform_device for McBSP ports */
+#define OMAP_MCBSP_PLATFORM_DEVICE(port_nr)             \
+static struct platform_device omap_mcbsp##port_nr = {   \
+        .name   = "omap-mcbsp-dai",                     \
+        .id     = port_nr - 1,                  \
+}
+
+#define MCBSP_CONFIG_TYPE2      0x2
+#define MCBSP_CONFIG_TYPE3      0x3
+#define MCBSP_CONFIG_TYPE4      0x4
+
+#define OMAP7XX_MCBSP1_BASE     0xfffb1000
+#define OMAP7XX_MCBSP2_BASE     0xfffb1800
+
+#define OMAP1510_MCBSP1_BASE    0xe1011800
+#define OMAP1510_MCBSP2_BASE    0xfffb1000
+#define OMAP1510_MCBSP3_BASE    0xe1017000
+
+#define OMAP1610_MCBSP1_BASE    0xe1011800
+#define OMAP1610_MCBSP2_BASE    0xfffb1000
+#define OMAP1610_MCBSP3_BASE    0xe1017000
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OMAP_MCBSP_REG_DRR2     0x00
+#define OMAP_MCBSP_REG_DRR1     0x02
+#define OMAP_MCBSP_REG_DXR2     0x04
+#define OMAP_MCBSP_REG_DXR1     0x06
+#define OMAP_MCBSP_REG_DRR      0x02
+#define OMAP_MCBSP_REG_DXR      0x06
+#define OMAP_MCBSP_REG_SPCR2    0x08
+#define OMAP_MCBSP_REG_SPCR1    0x0a
+#define OMAP_MCBSP_REG_RCR2     0x0c
+#define OMAP_MCBSP_REG_RCR1     0x0e
+#define OMAP_MCBSP_REG_XCR2     0x10
+#define OMAP_MCBSP_REG_XCR1     0x12
+#define OMAP_MCBSP_REG_SRGR2    0x14
+#define OMAP_MCBSP_REG_SRGR1    0x16
+#define OMAP_MCBSP_REG_MCR2     0x18
+#define OMAP_MCBSP_REG_MCR1     0x1a
+#define OMAP_MCBSP_REG_RCERA    0x1c
+#define OMAP_MCBSP_REG_RCERB    0x1e
+#define OMAP_MCBSP_REG_XCERA    0x20
+#define OMAP_MCBSP_REG_XCERB    0x22
+#define OMAP_MCBSP_REG_PCR0     0x24
+#define OMAP_MCBSP_REG_RCERC    0x26
+#define OMAP_MCBSP_REG_RCERD    0x28
+#define OMAP_MCBSP_REG_XCERC    0x2A
+#define OMAP_MCBSP_REG_XCERD    0x2C
+#define OMAP_MCBSP_REG_RCERE    0x2E
+#define OMAP_MCBSP_REG_RCERF    0x30
+#define OMAP_MCBSP_REG_XCERE    0x32
+#define OMAP_MCBSP_REG_XCERF    0x34
+#define OMAP_MCBSP_REG_RCERG    0x36
+#define OMAP_MCBSP_REG_RCERH    0x38
+#define OMAP_MCBSP_REG_XCERG    0x3A
+#define OMAP_MCBSP_REG_XCERH    0x3C
+
+/* Dummy defines, these are not available on omap1 */
+#define OMAP_MCBSP_REG_XCCR     0x00
+#define OMAP_MCBSP_REG_RCCR     0x00
+
+#else
+
+#define OMAP_MCBSP_REG_DRR2     0x00
+#define OMAP_MCBSP_REG_DRR1     0x04
+#define OMAP_MCBSP_REG_DXR2     0x08
+#define OMAP_MCBSP_REG_DXR1     0x0C
+#define OMAP_MCBSP_REG_DRR      0x00
+#define OMAP_MCBSP_REG_DXR      0x08
+#define OMAP_MCBSP_REG_SPCR2    0x10
+#define OMAP_MCBSP_REG_SPCR1    0x14
+#define OMAP_MCBSP_REG_RCR2     0x18
+#define OMAP_MCBSP_REG_RCR1     0x1C
+#define OMAP_MCBSP_REG_XCR2     0x20
+#define OMAP_MCBSP_REG_XCR1     0x24
+#define OMAP_MCBSP_REG_SRGR2    0x28
+#define OMAP_MCBSP_REG_SRGR1    0x2C
+#define OMAP_MCBSP_REG_MCR2     0x30
+#define OMAP_MCBSP_REG_MCR1     0x34
+#define OMAP_MCBSP_REG_RCERA    0x38
+#define OMAP_MCBSP_REG_RCERB    0x3C
+#define OMAP_MCBSP_REG_XCERA    0x40
+#define OMAP_MCBSP_REG_XCERB    0x44
+#define OMAP_MCBSP_REG_PCR0     0x48
+#define OMAP_MCBSP_REG_RCERC    0x4C
+#define OMAP_MCBSP_REG_RCERD    0x50
+#define OMAP_MCBSP_REG_XCERC    0x54
+#define OMAP_MCBSP_REG_XCERD    0x58
+#define OMAP_MCBSP_REG_RCERE    0x5C
+#define OMAP_MCBSP_REG_RCERF    0x60
+#define OMAP_MCBSP_REG_XCERE    0x64
+#define OMAP_MCBSP_REG_XCERF    0x68
+#define OMAP_MCBSP_REG_RCERG    0x6C
+#define OMAP_MCBSP_REG_RCERH    0x70
+#define OMAP_MCBSP_REG_XCERG    0x74
+#define OMAP_MCBSP_REG_XCERH    0x78
+#define OMAP_MCBSP_REG_SYSCON   0x8C
+#define OMAP_MCBSP_REG_THRSH2   0x90
+#define OMAP_MCBSP_REG_THRSH1   0x94
+#define OMAP_MCBSP_REG_IRQST    0xA0
+#define OMAP_MCBSP_REG_IRQEN    0xA4
+#define OMAP_MCBSP_REG_WAKEUPEN 0xA8
+#define OMAP_MCBSP_REG_XCCR     0xAC
+#define OMAP_MCBSP_REG_RCCR     0xB0
+#define OMAP_MCBSP_REG_XBUFFSTAT        0xB4
+#define OMAP_MCBSP_REG_RBUFFSTAT        0xB8
+#define OMAP_MCBSP_REG_SSELCR   0xBC
+
+#define OMAP_ST_REG_REV         0x00
+#define OMAP_ST_REG_SYSCONFIG   0x10
+#define OMAP_ST_REG_IRQSTATUS   0x18
+#define OMAP_ST_REG_IRQENABLE   0x1C
+#define OMAP_ST_REG_SGAINCR     0x24
+#define OMAP_ST_REG_SFIRCR      0x28
+#define OMAP_ST_REG_SSELCR      0x2C
+
+#endif
+
+/************************** McBSP SPCR1 bit definitions ***********************/
+#define RRST                    0x0001
+#define RRDY                    0x0002
+#define RFULL                   0x0004
+#define RSYNC_ERR               0x0008
+#define RINTM(value)            ((value)<<4)    /* bits 4:5 */
+#define ABIS                    0x0040
+#define DXENA                   0x0080
+#define CLKSTP(value)           ((value)<<11)   /* bits 11:12 */
+#define RJUST(value)            ((value)<<13)   /* bits 13:14 */
+#define ALB                     0x8000
+#define DLB                     0x8000
+
+/************************** McBSP SPCR2 bit definitions ***********************/
+#define XRST            0x0001
+#define XRDY            0x0002
+#define XEMPTY          0x0004
+#define XSYNC_ERR       0x0008
+#define XINTM(value)    ((value)<<4)            /* bits 4:5 */
+#define GRST            0x0040
+#define FRST            0x0080
+#define SOFT            0x0100
+#define FREE            0x0200
+
+/************************** McBSP PCR bit definitions *************************/
+#define CLKRP           0x0001
+#define CLKXP           0x0002
+#define FSRP            0x0004
+#define FSXP            0x0008
+#define DR_STAT         0x0010
+#define DX_STAT         0x0020
+#define CLKS_STAT       0x0040
+#define SCLKME          0x0080
+#define CLKRM           0x0100
+#define CLKXM           0x0200
+#define FSRM            0x0400
+#define FSXM            0x0800
+#define RIOEN           0x1000
+#define XIOEN           0x2000
+#define IDLE_EN         0x4000
+
+/************************** McBSP RCR1 bit definitions ************************/
+#define RWDLEN1(value)          ((value)<<5)    /* Bits 5:7 */
+#define RFRLEN1(value)          ((value)<<8)    /* Bits 8:14 */
+
+/************************** McBSP XCR1 bit definitions ************************/
+#define XWDLEN1(value)          ((value)<<5)    /* Bits 5:7 */
+#define XFRLEN1(value)          ((value)<<8)    /* Bits 8:14 */
+
+/*************************** McBSP RCR2 bit definitions ***********************/
+#define RDATDLY(value)          (value)         /* Bits 0:1 */
+#define RFIG                    0x0004
+#define RCOMPAND(value)         ((value)<<3)    /* Bits 3:4 */
+#define RWDLEN2(value)          ((value)<<5)    /* Bits 5:7 */
+#define RFRLEN2(value)          ((value)<<8)    /* Bits 8:14 */
+#define RPHASE                  0x8000
+
+/*************************** McBSP XCR2 bit definitions ***********************/
+#define XDATDLY(value)          (value)         /* Bits 0:1 */
+#define XFIG                    0x0004
+#define XCOMPAND(value)         ((value)<<3)    /* Bits 3:4 */
+#define XWDLEN2(value)          ((value)<<5)    /* Bits 5:7 */
+#define XFRLEN2(value)          ((value)<<8)    /* Bits 8:14 */
+#define XPHASE                  0x8000
+
+/************************* McBSP SRGR1 bit definitions ************************/
+#define CLKGDV(value)           (value)         /* Bits 0:7 */
+#define FWID(value)             ((value)<<8)    /* Bits 8:15 */
+
+/************************* McBSP SRGR2 bit definitions ************************/
+#define FPER(value)             (value)         /* Bits 0:11 */
+#define FSGM                    0x1000
+#define CLKSM                   0x2000
+#define CLKSP                   0x4000
+#define GSYNC                   0x8000
+
+/************************* McBSP MCR1 bit definitions *************************/
+#define RMCM                    0x0001
+#define RCBLK(value)            ((value)<<2)    /* Bits 2:4 */
+#define RPABLK(value)           ((value)<<5)    /* Bits 5:6 */
+#define RPBBLK(value)           ((value)<<7)    /* Bits 7:8 */
+
+/************************* McBSP MCR2 bit definitions *************************/
+#define XMCM(value)             (value)         /* Bits 0:1 */
+#define XCBLK(value)            ((value)<<2)    /* Bits 2:4 */
+#define XPABLK(value)           ((value)<<5)    /* Bits 5:6 */
+#define XPBBLK(value)           ((value)<<7)    /* Bits 7:8 */
+
+/*********************** McBSP XCCR bit definitions *************************/
+#define EXTCLKGATE              0x8000
+#define PPCONNECT               0x4000
+#define DXENDLY(value)          ((value)<<12)   /* Bits 12:13 */
+#define XFULL_CYCLE             0x0800
+#define DILB                    0x0020
+#define XDMAEN                  0x0008
+#define XDISABLE                0x0001
+
+/********************** McBSP RCCR bit definitions *************************/
+#define RFULL_CYCLE             0x0800
+#define RDMAEN                  0x0008
+#define RDISABLE                0x0001
+
+/********************** McBSP SYSCONFIG bit definitions ********************/
+#define CLOCKACTIVITY(value)    ((value)<<8)
+#define SIDLEMODE(value)        ((value)<<3)
+#define ENAWAKEUP               0x0004
+#define SOFTRST                 0x0002
+
+/********************** McBSP SSELCR bit definitions ***********************/
+#define SIDETONEEN              0x0400
+
+/********************** McBSP Sidetone SYSCONFIG bit definitions ***********/
+#define ST_AUTOIDLE             0x0001
+
+/********************** McBSP Sidetone SGAINCR bit definitions *************/
+#define ST_CH1GAIN(value)       ((value<<16))   /* Bits 16:31 */
+#define ST_CH0GAIN(value)       (value)         /* Bits 0:15 */
+
+/********************** McBSP Sidetone SFIRCR bit definitions **************/
+#define ST_FIRCOEFF(value)      (value)         /* Bits 0:15 */
+
+/********************** McBSP Sidetone SSELCR bit definitions **************/
+#define ST_COEFFWRDONE          0x0004
+#define ST_COEFFWREN            0x0002
+#define ST_SIDETONEEN           0x0001
+
+/********************** McBSP DMA operating modes **************************/
+#define MCBSP_DMA_MODE_ELEMENT          0
+#define MCBSP_DMA_MODE_THRESHOLD        1
+#define MCBSP_DMA_MODE_FRAME            2
+
+/********************** McBSP WAKEUPEN bit definitions *********************/
+#define XEMPTYEOFEN             0x4000
+#define XRDYEN                  0x0400
+#define XEOFEN                  0x0200
+#define XFSXEN                  0x0100
+#define XSYNCERREN              0x0080
+#define RRDYEN                  0x0008
+#define REOFEN                  0x0004
+#define RFSREN                  0x0002
+#define RSYNCERREN              0x0001
+
+/* CLKR signal muxing options */
+#define CLKR_SRC_CLKR           0
+#define CLKR_SRC_CLKX           1
+
+/* FSR signal muxing options */
+#define FSR_SRC_FSR             0
+#define FSR_SRC_FSX             1
+
+/* McBSP functional clock sources */
+#define MCBSP_CLKS_PRCM_SRC     0
+#define MCBSP_CLKS_PAD_SRC      1
+
+/* we don't do multichannel for now */
+struct omap_mcbsp_reg_cfg {
+        u16 spcr2;
+        u16 spcr1;
+        u16 rcr2;
+        u16 rcr1;
+        u16 xcr2;
+        u16 xcr1;
+        u16 srgr2;
+        u16 srgr1;
+        u16 mcr2;
+        u16 mcr1;
+        u16 pcr0;
+        u16 rcerc;
+        u16 rcerd;
+        u16 xcerc;
+        u16 xcerd;
+        u16 rcere;
+        u16 rcerf;
+        u16 xcere;
+        u16 xcerf;
+        u16 rcerg;
+        u16 rcerh;
+        u16 xcerg;
+        u16 xcerh;
+        u16 xccr;
+        u16 rccr;
+};
+
+typedef enum {
+        OMAP_MCBSP_WORD_8 = 0,
+        OMAP_MCBSP_WORD_12,
+        OMAP_MCBSP_WORD_16,
+        OMAP_MCBSP_WORD_20,
+        OMAP_MCBSP_WORD_24,
+        OMAP_MCBSP_WORD_32,
+} omap_mcbsp_word_length;
+
+/* Platform specific configuration */
+struct omap_mcbsp_ops {
+        void (*request)(unsigned int);
+        void (*free)(unsigned int);
+        int (*set_clks_src)(u8, u8);
+};
+
+struct omap_mcbsp_platform_data {
+        unsigned long phys_base;
+        u8 dma_rx_sync, dma_tx_sync;
+        u16 rx_irq, tx_irq;
+        struct omap_mcbsp_ops *ops;
+#ifdef CONFIG_ARCH_OMAP3
+        /* Sidetone block for McBSP 2 and 3 */
+        unsigned long phys_base_st;
+#endif
+        u16 buffer_size;
+        unsigned int mcbsp_config_type;
+};
+
+struct omap_mcbsp_st_data {
+        void __iomem *io_base_st;
+        bool running;
+        bool enabled;
+        s16 taps[128];  /* Sidetone filter coefficients */
+        int nr_taps;    /* Number of filter coefficients in use */
+        s16 ch0gain;
+        s16 ch1gain;
+};
+
+struct omap_mcbsp {
+        struct device *dev;
+        unsigned long phys_base;
+        unsigned long phys_dma_base;
+        void __iomem *io_base;
+        u8 id;
+        u8 free;
+
+        int rx_irq;
+        int tx_irq;
+
+        /* DMA stuff */
+        u8 dma_rx_sync;
+        u8 dma_tx_sync;
+
+        /* Protect the field .free, while checking if the mcbsp is in use */
+        spinlock_t lock;
+        struct omap_mcbsp_platform_data *pdata;
+        struct clk *fclk;
+#ifdef CONFIG_ARCH_OMAP3
+        struct omap_mcbsp_st_data *st_data;
+        int dma_op_mode;
+        u16 max_tx_thres;
+        u16 max_rx_thres;
+#endif
+        void *reg_cache;
+        unsigned int mcbsp_config_type;
+};
+
+/**
+ * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod
+ * @sidetone: name of the sidetone device
+ */
+struct omap_mcbsp_dev_attr {
+        const char *sidetone;
+};
+
+extern struct omap_mcbsp **mcbsp_ptr;
+extern int omap_mcbsp_count, omap_mcbsp_cache_size;
+
+#define omap_mcbsp_check_valid_id(id)   (id < omap_mcbsp_count)
+#define id_to_mcbsp_ptr(id)             mcbsp_ptr[id];
+
+int omap_mcbsp_init(void);
+void omap_mcbsp_register_board_cfg(struct resource *res, int res_count,
+                        struct omap_mcbsp_platform_data *config, int size);
+void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg * config);
+#ifdef CONFIG_ARCH_OMAP3
+void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold);
+void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold);
+u16 omap_mcbsp_get_max_tx_threshold(unsigned int id);
+u16 omap_mcbsp_get_max_rx_threshold(unsigned int id);
+u16 omap_mcbsp_get_fifo_size(unsigned int id);
+u16 omap_mcbsp_get_tx_delay(unsigned int id);
+u16 omap_mcbsp_get_rx_delay(unsigned int id);
+int omap_mcbsp_get_dma_op_mode(unsigned int id);
+#else
+static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold)
+{ }
+static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_fifo_size(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_tx_delay(unsigned int id) { return 0; }
+static inline u16 omap_mcbsp_get_rx_delay(unsigned int id) { return 0; }
+static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; }
+#endif
+int omap_mcbsp_request(unsigned int id);
+void omap_mcbsp_free(unsigned int id);
+void omap_mcbsp_start(unsigned int id, int tx, int rx);
+void omap_mcbsp_stop(unsigned int id, int tx, int rx);
+
+/* McBSP functional clock source changing function */
+extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id);
+
+/* McBSP signal muxing API */
+void omap2_mcbsp1_mux_clkr_src(u8 mux);
+void omap2_mcbsp1_mux_fsr_src(u8 mux);
+
+int omap_mcbsp_dma_ch_params(unsigned int id, unsigned int stream);
+int omap_mcbsp_dma_reg_params(unsigned int id, unsigned int stream);
+
+#ifdef CONFIG_ARCH_OMAP3
+/* Sidetone specific API */
+int omap_st_set_chgain(unsigned int id, int channel, s16 chgain);
+int omap_st_get_chgain(unsigned int id, int channel, s16 *chgain);
+int omap_st_enable(unsigned int id);
+int omap_st_disable(unsigned int id);
+int omap_st_is_enabled(unsigned int id);
+#else
+static inline int omap_st_set_chgain(unsigned int id, int channel,
+                                     s16 chgain) { return 0; }
+static inline int omap_st_get_chgain(unsigned int id, int channel,
+                                     s16 *chgain) { return 0; }
+static inline int omap_st_enable(unsigned int id) { return 0; }
+static inline int omap_st_disable(unsigned int id) { return 0; }
+static inline int omap_st_is_enabled(unsigned int id) {  return 0; }
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
new file mode 100644
index 00000000000..3d51b18131c
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
@@ -0,0 +1,26 @@
+#ifndef _OMAP2_MCSPI_H
+#define _OMAP2_MCSPI_H
+
+#define OMAP2_MCSPI_REV 0
+#define OMAP3_MCSPI_REV 1
+#define OMAP4_MCSPI_REV 2
+
+#define OMAP4_MCSPI_REG_OFFSET 0x100
+
+struct omap2_mcspi_platform_config {
+        unsigned short  num_cs;
+        unsigned int regs_offset;
+};
+
+struct omap2_mcspi_dev_attr {
+        unsigned short num_chipselect;
+};
+
+struct omap2_mcspi_device_config {
+        unsigned turbo_mode:1;
+
+        /* Do we want one channel enabled at the same time? */
+        unsigned single_channel:1;
+};
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
new file mode 100644
index 00000000000..e6720aa2d55
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/plat-omap/include/mach/memory.h
+ *
+ * Memory map for OMAP-1510 and 1610
+ *
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
+ * Copyright (C) 1999 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#if defined(CONFIG_ARCH_OMAP1)
+#define PLAT_PHYS_OFFSET                UL(0x10000000)
+#else
+#define PLAT_PHYS_OFFSET                UL(0x80000000)
+#endif
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET      UL(0x30000000)
+
+#define virt_to_lbus(x)         ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x)         ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev)     (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_pfn_to_dma(dev, pfn)     \
+        ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
+           if (is_lbus_device(dev)) \
+                __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+           __dma; })
+
+#define __arch_dma_to_pfn(dev, addr)    \
+        ({ dma_addr_t __dma = addr;                             \
+           if (is_lbus_device(dev))                             \
+                __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;      \
+           __phys_to_pfn(__dma);                                \
+        })
+
+#define __arch_dma_to_virt(dev, addr)   ({ (void *) (is_lbus_device(dev) ? \
+                                                lbus_to_virt(addr) : \
+                                                __phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr)   ({ unsigned long __addr = (unsigned long)(addr); \
+                                           (dma_addr_t) (is_lbus_device(dev) ? \
+                                                virt_to_lbus(__addr) : \
+                                                __virt_to_phys(__addr)); })
+
+#endif  /* CONFIG_ARCH_OMAP15XX */
+
+/* Override the ARM default */
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+
+#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
+#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
+#endif
+
+#define CONSISTENT_DMA_SIZE \
+        (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
+
+#endif
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/plat/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
new file mode 100644
index 00000000000..4a970ec62dd
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/menelaus.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/plat-omap/include/mach/menelaus.h
+ *
+ * Functions to access Menelaus power management chip
+ */
+
+#ifndef __ASM_ARCH_MENELAUS_H
+#define __ASM_ARCH_MENELAUS_H
+
+struct device;
+
+struct menelaus_platform_data {
+        int (* late_init)(struct device *dev);
+};
+
+extern int menelaus_register_mmc_callback(void (*callback)(void *data, u8 card_mask),
+                                          void *data);
+extern void menelaus_unregister_mmc_callback(void);
+extern int menelaus_set_mmc_opendrain(int slot, int enable);
+extern int menelaus_set_mmc_slot(int slot, int enable, int power, int cd_on);
+
+extern int menelaus_set_vmem(unsigned int mV);
+extern int menelaus_set_vio(unsigned int mV);
+extern int menelaus_set_vmmc(unsigned int mV);
+extern int menelaus_set_vaux(unsigned int mV);
+extern int menelaus_set_vdcdc(int dcdc, unsigned int mV);
+extern int menelaus_set_slot_sel(int enable);
+extern int menelaus_get_slot_pin_states(void);
+extern int menelaus_set_vcore_sw(unsigned int mV);
+extern int menelaus_set_vcore_hw(unsigned int roof_mV, unsigned int floor_mV);
+
+#define EN_VPLL_SLEEP   (1 << 7)
+#define EN_VMMC_SLEEP   (1 << 6)
+#define EN_VAUX_SLEEP   (1 << 5)
+#define EN_VIO_SLEEP    (1 << 4)
+#define EN_VMEM_SLEEP   (1 << 3)
+#define EN_DC3_SLEEP    (1 << 2)
+#define EN_DC2_SLEEP    (1 << 1)
+#define EN_VC_SLEEP     (1 << 0)
+
+extern int menelaus_set_regulator_sleep(int enable, u32 val);
+
+#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_MENELAUS)
+#define omap_has_menelaus()     1
+#else
+#define omap_has_menelaus()     0
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
new file mode 100644
index 00000000000..c7b874186c2
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -0,0 +1,182 @@
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __OMAP2_MMC_H
+#define __OMAP2_MMC_H
+
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/mmc/host.h>
+
+#include <plat/board.h>
+
+#define OMAP15XX_NR_MMC         1
+#define OMAP16XX_NR_MMC         2
+#define OMAP1_MMC_SIZE          0x080
+#define OMAP1_MMC1_BASE         0xfffb7800
+#define OMAP1_MMC2_BASE         0xfffb7c00      /* omap16xx only */
+
+#define OMAP24XX_NR_MMC         2
+#define OMAP2420_MMC_SIZE       OMAP1_MMC_SIZE
+#define OMAP2_MMC1_BASE         0x4809c000
+
+#define OMAP4_MMC_REG_OFFSET    0x100
+
+#define OMAP_MMC_MAX_SLOTS      2
+
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT   BIT(1)
+
+struct omap_mmc_dev_attr {
+        u8 flags;
+};
+
+struct omap_mmc_platform_data {
+        /* back-link to device */
+        struct device *dev;
+
+        /* number of slots per controller */
+        unsigned nr_slots:2;
+
+        /* set if your board has components or wiring that limits the
+         * maximum frequency on the MMC bus */
+        unsigned int max_freq;
+
+        /* switch the bus to a new slot */
+        int (*switch_slot)(struct device *dev, int slot);
+        /* initialize board-specific MMC functionality, can be NULL if
+         * not supported */
+        int (*init)(struct device *dev);
+        void (*cleanup)(struct device *dev);
+        void (*shutdown)(struct device *dev);
+
+        /* To handle board related suspend/resume functionality for MMC */
+        int (*suspend)(struct device *dev, int slot);
+        int (*resume)(struct device *dev, int slot);
+
+        /* Return context loss count due to PM states changing */
+        int (*get_context_loss_count)(struct device *dev);
+
+        u64 dma_mask;
+
+        /* Integrating attributes from the omap_hwmod layer */
+        u8 controller_flags;
+
+        /* Register offset deviation */
+        u16 reg_offset;
+
+        struct omap_mmc_slot_data {
+
+                /*
+                 * 4/8 wires and any additional host capabilities
+                 * need to OR'd all capabilities (ref. linux/mmc/host.h)
+                 */
+                u8  wires;      /* Used for the MMC driver on omap1 and 2420 */
+                u32 caps;       /* Used for the MMC driver on 2430 and later */
+
+                /*
+                 * nomux means "standard" muxing is wrong on this board, and
+                 * that board-specific code handled it before common init logic.
+                 */
+                unsigned nomux:1;
+
+                /* switch pin can be for card detect (default) or card cover */
+                unsigned cover:1;
+
+                /* use the internal clock */
+                unsigned internal_clock:1;
+
+                /* nonremovable e.g. eMMC */
+                unsigned nonremovable:1;
+
+                /* Try to sleep or power off when possible */
+                unsigned power_saving:1;
+
+                /* If using power_saving and the MMC power is not to go off */
+                unsigned no_off:1;
+
+                /* eMMC does not handle power off when not in sleep state */
+                unsigned no_regulator_off_init:1;
+
+                /* Regulator off remapped to sleep */
+                unsigned vcc_aux_disable_is_sleep:1;
+
+                /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS         (1 << 0)
+#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+                unsigned features;
+
+                int switch_pin;                 /* gpio (card detect) */
+                int gpio_wp;                    /* gpio (write protect) */
+
+                int (*set_bus_mode)(struct device *dev, int slot, int bus_mode);
+                int (*set_power)(struct device *dev, int slot,
+                                 int power_on, int vdd);
+                int (*get_ro)(struct device *dev, int slot);
+                int (*set_sleep)(struct device *dev, int slot, int sleep,
+                                 int vdd, int cardsleep);
+                void (*remux)(struct device *dev, int slot, int power_on);
+                /* Call back before enabling / disabling regulators */
+                void (*before_set_reg)(struct device *dev, int slot,
+                                       int power_on, int vdd);
+                /* Call back after enabling / disabling regulators */
+                void (*after_set_reg)(struct device *dev, int slot,
+                                      int power_on, int vdd);
+                /* if we have special card, init it using this callback */
+                void (*init_card)(struct mmc_card *card);
+
+                /* return MMC cover switch state, can be NULL if not supported.
+                 *
+                 * possible return values:
+                 *   0 - closed
+                 *   1 - open
+                 */
+                int (*get_cover_state)(struct device *dev, int slot);
+
+                const char *name;
+                u32 ocr_mask;
+
+                /* Card detection IRQs */
+                int card_detect_irq;
+                int (*card_detect)(struct device *dev, int slot);
+
+                unsigned int ban_openended:1;
+
+        } slots[OMAP_MMC_MAX_SLOTS];
+};
+
+/* called from board-specific card detection service routine */
+extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
+                                        int is_closed);
+
+#if     defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
+        defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                                int nr_controllers);
+void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
+int omap_mmc_add(const char *name, int id, unsigned long base,
+                                unsigned long size, unsigned int irq,
+                                struct omap_mmc_platform_data *data);
+#else
+static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
+                                int nr_controllers)
+{
+}
+static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
+{
+}
+static inline int omap_mmc_add(const char *name, int id, unsigned long base,
+                                unsigned long size, unsigned int irq,
+                                struct omap_mmc_platform_data *data)
+{
+        return 0;
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
new file mode 100644
index 00000000000..999ffba2690
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -0,0 +1,102 @@
+/*
+ * Support for compiling in multiple OMAP processors
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __PLAT_OMAP_MULTI_H
+#define __PLAT_OMAP_MULTI_H
+
+/*
+ * Test if multicore OMAP support is needed
+ */
+#undef MULTI_OMAP1
+#undef MULTI_OMAP2
+#undef OMAP_NAME
+
+#ifdef CONFIG_ARCH_OMAP730
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap730
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP850
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap850
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP15XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap1510
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP16XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP1
+#  define MULTI_OMAP1
+# else
+#  define OMAP_NAME omap16xx
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP2PLUS
+# if (defined(OMAP_NAME) || defined(MULTI_OMAP1))
+#  error "OMAP1 and OMAP2PLUS can't be selected at the same time"
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2420
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2420
+# endif
+#endif
+#ifdef CONFIG_SOC_OMAP2430
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap2430
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP3
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap3
+# endif
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME omap4
+# endif
+#endif
+
+#endif  /* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/mux.h b/arch/arm/plat-omap/include/plat/mux.h
new file mode 100644
index 00000000000..aeba71796ad
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -0,0 +1,454 @@
+/*
+ * arch/arm/plat-omap/include/mach/mux.h
+ *
+ * Table of the Omap register configurations for the FUNC_MUX and
+ * PULL_DWN combinations.
+ *
+ * Copyright (C) 2004 - 2008 Texas Instruments Inc.
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * NOTE: Please use the following naming style for new pin entries.
+ *       For example, W8_1610_MMC2_DAT0, where:
+ *       - W8        = ball
+ *       - 1610      = 1510 or 1610, none if common for both 1510 and 1610
+ *       - MMC2_DAT0 = function
+ */
+
+#ifndef __ASM_ARCH_MUX_H
+#define __ASM_ARCH_MUX_H
+
+#define PU_PD_SEL_NA            0       /* No pu_pd reg available */
+#define PULL_DWN_CTRL_NA        0       /* No pull-down control needed */
+
+#ifdef  CONFIG_OMAP_MUX_DEBUG
+#define MUX_REG(reg, mode_offset, mode) .mux_reg_name = "FUNC_MUX_CTRL_"#reg, \
+                                        .mux_reg = FUNC_MUX_CTRL_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG(reg, bit, status)      .pull_name = "PULL_DWN_CTRL_"#reg, \
+                                        .pull_reg = PULL_DWN_CTRL_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#define PU_PD_REG(reg, status)          .pu_pd_name = "PU_PD_SEL_"#reg, \
+                                        .pu_pd_reg = PU_PD_SEL_##reg, \
+                                        .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+                                        .mux_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)  .pull_name = "OMAP7XX_IO_CONF_"#reg, \
+                                        .pull_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#else
+
+#define MUX_REG(reg, mode_offset, mode) .mux_reg = FUNC_MUX_CTRL_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG(reg, bit, status)      .pull_reg = PULL_DWN_CTRL_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#define PU_PD_REG(reg, status)          .pu_pd_reg = PU_PD_SEL_##reg, \
+                                        .pu_pd_val = status,
+
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+                                        .mux_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .mask_offset = mode_offset, \
+                                        .mask = mode,
+
+#define PULL_REG_7XX(reg, bit, status)  .pull_reg = OMAP7XX_IO_CONF_##reg, \
+                                        .pull_bit = bit, \
+                                        .pull_val = status,
+
+#endif /* CONFIG_OMAP_MUX_DEBUG */
+
+#define MUX_CFG(desc, mux_reg, mode_offset, mode,       \
+                pull_reg, pull_bit, pull_status,        \
+                pu_pd_reg, pu_pd_status, debug_status)  \
+{                                                       \
+        .name =  desc,                                  \
+        .debug = debug_status,                          \
+        MUX_REG(mux_reg, mode_offset, mode)             \
+        PULL_REG(pull_reg, pull_bit, pull_status)       \
+        PU_PD_REG(pu_pd_reg, pu_pd_status)              \
+},
+
+
+/*
+ * OMAP730/850 has a slightly different config for the pin mux.
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
+ *   not the FUNC_MUX_CTRL_x regs from hardware.h
+ * - for pull-up/down, only has one enable bit which is is in the same register
+ *   as mux config
+ */
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,   \
+                   pull_bit, pull_status, debug_status)\
+{                                                       \
+        .name =  desc,                                  \
+        .debug = debug_status,                          \
+        MUX_REG_7XX(mux_reg, mode_offset, mode)         \
+        PULL_REG_7XX(mux_reg, pull_bit, pull_status)    \
+        PU_PD_REG(NA, 0)                \
+},
+
+struct pin_config {
+        char                    *name;
+        const unsigned int      mux_reg;
+        unsigned char           debug;
+
+        const unsigned char mask_offset;
+        const unsigned char mask;
+
+        const char *pull_name;
+        const unsigned int pull_reg;
+        const unsigned char pull_val;
+        const unsigned char pull_bit;
+
+        const char *pu_pd_name;
+        const unsigned int pu_pd_reg;
+        const unsigned char pu_pd_val;
+
+#if     defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+        const char *mux_reg_name;
+#endif
+
+};
+
+enum omap7xx_index {
+        /* OMAP 730 keyboard */
+        E2_7XX_KBR0,
+        J7_7XX_KBR1,
+        E1_7XX_KBR2,
+        F3_7XX_KBR3,
+        D2_7XX_KBR4,
+        C2_7XX_KBC0,
+        D3_7XX_KBC1,
+        E4_7XX_KBC2,
+        F4_7XX_KBC3,
+        E3_7XX_KBC4,
+
+        /* USB */
+        AA17_7XX_USB_DM,
+        W16_7XX_USB_PU_EN,
+        W17_7XX_USB_VBUSI,
+        W18_7XX_USB_DMCK_OUT,
+        W19_7XX_USB_DCRST,
+
+        /* MMC */
+        MMC_7XX_CMD,
+        MMC_7XX_CLK,
+        MMC_7XX_DAT0,
+
+        /* I2C */
+        I2C_7XX_SCL,
+        I2C_7XX_SDA,
+
+        /* SPI */
+        SPI_7XX_1,
+        SPI_7XX_2,
+        SPI_7XX_3,
+        SPI_7XX_4,
+        SPI_7XX_5,
+        SPI_7XX_6,
+
+        /* UART */
+        UART_7XX_1,
+        UART_7XX_2,
+};
+
+enum omap1xxx_index {
+        /* UART1 (BT_UART_GATING)*/
+        UART1_TX = 0,
+        UART1_RTS,
+
+        /* UART2 (COM_UART_GATING)*/
+        UART2_TX,
+        UART2_RX,
+        UART2_CTS,
+        UART2_RTS,
+
+        /* UART3 (GIGA_UART_GATING) */
+        UART3_TX,
+        UART3_RX,
+        UART3_CTS,
+        UART3_RTS,
+        UART3_CLKREQ,
+        UART3_BCLK,     /* 12MHz clock out */
+        Y15_1610_UART3_RTS,
+
+        /* PWT & PWL */
+        PWT,
+        PWL,
+
+        /* USB master generic */
+        R18_USB_VBUS,
+        R18_1510_USB_GPIO0,
+        W4_USB_PUEN,
+        W4_USB_CLKO,
+        W4_USB_HIGHZ,
+        W4_GPIO58,
+
+        /* USB1 master */
+        USB1_SUSP,
+        USB1_SEO,
+        W13_1610_USB1_SE0,
+        USB1_TXEN,
+        USB1_TXD,
+        USB1_VP,
+        USB1_VM,
+        USB1_RCV,
+        USB1_SPEED,
+        R13_1610_USB1_SPEED,
+        R13_1710_USB1_SE0,
+
+        /* USB2 master */
+        USB2_SUSP,
+        USB2_VP,
+        USB2_TXEN,
+        USB2_VM,
+        USB2_RCV,
+        USB2_SEO,
+        USB2_TXD,
+
+        /* OMAP-1510 GPIO */
+        R18_1510_GPIO0,
+        R19_1510_GPIO1,
+        M14_1510_GPIO2,
+
+        /* OMAP1610 GPIO */
+        P18_1610_GPIO3,
+        Y15_1610_GPIO17,
+
+        /* OMAP-1710 GPIO */
+        R18_1710_GPIO0,
+        V2_1710_GPIO10,
+        N21_1710_GPIO14,
+        W15_1710_GPIO40,
+
+        /* MPUIO */
+        MPUIO2,
+        N15_1610_MPUIO2,
+        MPUIO4,
+        MPUIO5,
+        T20_1610_MPUIO5,
+        W11_1610_MPUIO6,
+        V10_1610_MPUIO7,
+        W11_1610_MPUIO9,
+        V10_1610_MPUIO10,
+        W10_1610_MPUIO11,
+        E20_1610_MPUIO13,
+        U20_1610_MPUIO14,
+        E19_1610_MPUIO15,
+
+        /* MCBSP2 */
+        MCBSP2_CLKR,
+        MCBSP2_CLKX,
+        MCBSP2_DR,
+        MCBSP2_DX,
+        MCBSP2_FSR,
+        MCBSP2_FSX,
+
+        /* MCBSP3 */
+        MCBSP3_CLKX,
+
+        /* Misc ballouts */
+        BALLOUT_V8_ARMIO3,
+        N20_HDQ,
+
+        /* OMAP-1610 MMC2 */
+        W8_1610_MMC2_DAT0,
+        V8_1610_MMC2_DAT1,
+        W15_1610_MMC2_DAT2,
+        R10_1610_MMC2_DAT3,
+        Y10_1610_MMC2_CLK,
+        Y8_1610_MMC2_CMD,
+        V9_1610_MMC2_CMDDIR,
+        V5_1610_MMC2_DATDIR0,
+        W19_1610_MMC2_DATDIR1,
+        R18_1610_MMC2_CLKIN,
+
+        /* OMAP-1610 External Trace Interface */
+        M19_1610_ETM_PSTAT0,
+        L15_1610_ETM_PSTAT1,
+        L18_1610_ETM_PSTAT2,
+        L19_1610_ETM_D0,
+        J19_1610_ETM_D6,
+        J18_1610_ETM_D7,
+
+        /* OMAP16XX GPIO */
+        P20_1610_GPIO4,
+        V9_1610_GPIO7,
+        W8_1610_GPIO9,
+        N20_1610_GPIO11,
+        N19_1610_GPIO13,
+        P10_1610_GPIO22,
+        V5_1610_GPIO24,
+        AA20_1610_GPIO_41,
+        W19_1610_GPIO48,
+        M7_1610_GPIO62,
+        V14_16XX_GPIO37,
+        R9_16XX_GPIO18,
+        L14_16XX_GPIO49,
+
+        /* OMAP-1610 uWire */
+        V19_1610_UWIRE_SCLK,
+        U18_1610_UWIRE_SDI,
+        W21_1610_UWIRE_SDO,
+        N14_1610_UWIRE_CS0,
+        P15_1610_UWIRE_CS3,
+        N15_1610_UWIRE_CS1,
+
+        /* OMAP-1610 SPI */
+        U19_1610_SPIF_SCK,
+        U18_1610_SPIF_DIN,
+        P20_1610_SPIF_DIN,
+        W21_1610_SPIF_DOUT,
+        R18_1610_SPIF_DOUT,
+        N14_1610_SPIF_CS0,
+        N15_1610_SPIF_CS1,
+        T19_1610_SPIF_CS2,
+        P15_1610_SPIF_CS3,
+
+        /* OMAP-1610 Flash */
+        L3_1610_FLASH_CS2B_OE,
+        M8_1610_FLASH_CS2B_WE,
+
+        /* First MMC */
+        MMC_CMD,
+        MMC_DAT1,
+        MMC_DAT2,
+        MMC_DAT0,
+        MMC_CLK,
+        MMC_DAT3,
+
+        /* OMAP-1710 MMC CMDDIR and DATDIR0 */
+        M15_1710_MMC_CLKI,
+        P19_1710_MMC_CMDDIR,
+        P20_1710_MMC_DATDIR0,
+
+        /* OMAP-1610 USB0 alternate pin configuration */
+        W9_USB0_TXEN,
+        AA9_USB0_VP,
+        Y5_USB0_RCV,
+        R9_USB0_VM,
+        V6_USB0_TXD,
+        W5_USB0_SE0,
+        V9_USB0_SPEED,
+        V9_USB0_SUSP,
+
+        /* USB2 */
+        W9_USB2_TXEN,
+        AA9_USB2_VP,
+        Y5_USB2_RCV,
+        R9_USB2_VM,
+        V6_USB2_TXD,
+        W5_USB2_SE0,
+
+        /* 16XX UART */
+        R13_1610_UART1_TX,
+        V14_16XX_UART1_RX,
+        R14_1610_UART1_CTS,
+        AA15_1610_UART1_RTS,
+        R9_16XX_UART2_RX,
+        L14_16XX_UART3_RX,
+
+        /* I2C OMAP-1610 */
+        I2C_SCL,
+        I2C_SDA,
+
+        /* Keypad */
+        F18_1610_KBC0,
+        D20_1610_KBC1,
+        D19_1610_KBC2,
+        E18_1610_KBC3,
+        C21_1610_KBC4,
+        G18_1610_KBR0,
+        F19_1610_KBR1,
+        H14_1610_KBR2,
+        E20_1610_KBR3,
+        E19_1610_KBR4,
+        N19_1610_KBR5,
+
+        /* Power management */
+        T20_1610_LOW_PWR,
+
+        /* MCLK Settings */
+        V5_1710_MCLK_ON,
+        V5_1710_MCLK_OFF,
+        R10_1610_MCLK_ON,
+        R10_1610_MCLK_OFF,
+
+        /* CompactFlash controller */
+        P11_1610_CF_CD2,
+        R11_1610_CF_IOIS16,
+        V10_1610_CF_IREQ,
+        W10_1610_CF_RESET,
+        W11_1610_CF_CD1,
+
+        /* parallel camera */
+        J15_1610_CAM_LCLK,
+        J18_1610_CAM_D7,
+        J19_1610_CAM_D6,
+        J14_1610_CAM_D5,
+        K18_1610_CAM_D4,
+        K19_1610_CAM_D3,
+        K15_1610_CAM_D2,
+        K14_1610_CAM_D1,
+        L19_1610_CAM_D0,
+        L18_1610_CAM_VS,
+        L15_1610_CAM_HS,
+        M19_1610_CAM_RSTZ,
+        Y15_1610_CAM_OUTCLK,
+
+        /* serial camera */
+        H19_1610_CAM_EXCLK,
+        Y12_1610_CCP_CLKP,
+        W13_1610_CCP_CLKM,
+        W14_1610_CCP_DATAP,
+        Y14_1610_CCP_DATAM,
+
+};
+
+struct omap_mux_cfg {
+        struct pin_config       *pins;
+        unsigned long           size;
+        int                     (*cfg_reg)(const struct pin_config *cfg);
+};
+
+#ifdef  CONFIG_OMAP_MUX
+/* setup pin muxing in Linux */
+extern int omap1_mux_init(void);
+extern int omap_mux_register(struct omap_mux_cfg *);
+extern int omap_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
+static inline int omap1_mux_init(void) { return 0; }
+static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+extern int omap2_mux_init(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h
new file mode 100644
index 00000000000..67fc5060183
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/nand.h
@@ -0,0 +1,44 @@
+/*
+ * arch/arm/plat-omap/include/mach/nand.h
+ *
+ * Copyright (C) 2006 Micron Technology Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/gpmc.h>
+#include <linux/mtd/partitions.h>
+
+enum nand_io {
+        NAND_OMAP_PREFETCH_POLLED = 0,  /* prefetch polled mode, default */
+        NAND_OMAP_POLLED,               /* polled mode, without prefetch */
+        NAND_OMAP_PREFETCH_DMA,         /* prefetch enabled sDMA mode */
+        NAND_OMAP_PREFETCH_IRQ          /* prefetch enabled irq mode */
+};
+
+struct omap_nand_platform_data {
+        int                     cs;
+        struct mtd_partition    *parts;
+        struct gpmc_timings     *gpmc_t;
+        int                     nr_parts;
+        bool                    dev_ready;
+        int                     gpmc_irq;
+        enum nand_io            xfer_type;
+        unsigned long           phys_base;
+        int                     devsize;
+        enum omap_ecc           ecc_opt;
+};
+
+/* minimum size for IO mapping */
+#define NAND_IO_SIZE    4
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d)
+{
+        return 0;
+}
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h
new file mode 100644
index 00000000000..b53055b390d
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-alsa.h
@@ -0,0 +1,123 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap-alsa.h
+ *
+ * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards.
+ *
+ * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi>
+ *
+ * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil
+ * Written by Daniel Petrini, David Cohen, Anderson Briglia
+ *            {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  History
+ *  -------
+ *
+ *  2005/07/25 INdT-10LE Kernel Team -  Alsa driver for omap osk,
+ *                                      original version based in sa1100 driver
+ *                                      and omap oss driver.
+ */
+
+#ifndef __OMAP_ALSA_H
+#define __OMAP_ALSA_H
+
+#include <plat/dma.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <plat/mcbsp.h>
+#include <linux/platform_device.h>
+
+#define DMA_BUF_SIZE    (1024 * 8)
+
+/*
+ * Buffer management for alsa and dma
+ */
+struct audio_stream {
+        char *id;               /* identification string */
+        int stream_id;          /* numeric identification */
+        int dma_dev;            /* dma number of that device */
+        int *lch;               /* Chain of channels this stream is linked to */
+        char started;           /* to store if the chain was started or not */
+        int dma_q_head;         /* DMA Channel Q Head */
+        int dma_q_tail;         /* DMA Channel Q Tail */
+        char dma_q_count;       /* DMA Channel Q Count */
+        int active:1;           /* we are using this stream for transfer now */
+        int period;             /* current transfer period */
+        int periods;            /* current count of periods registerd in the DMA engine */
+        spinlock_t dma_lock;    /* for locking in DMA operations */
+        struct snd_pcm_substream *stream;       /* the pcm stream */
+        unsigned linked:1;      /* dma channels linked */
+        int offset;             /* store start position of the last period in the alsa buffer */
+        int (*hw_start)(void);  /* interface to start HW interface, e.g. McBSP */
+        int (*hw_stop)(void);   /* interface to stop HW interface, e.g. McBSP */
+};
+
+/*
+ * Alsa card structure for aic23
+ */
+struct snd_card_omap_codec {
+        struct snd_card *card;
+        struct snd_pcm *pcm;
+        long samplerate;
+        struct audio_stream s[2];       /* playback & capture */
+};
+
+/* Codec specific information and function pointers.
+ * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c)
+ * are responsible for defining the function pointers.
+ */
+struct omap_alsa_codec_config {
+        char    *name;
+        struct  omap_mcbsp_reg_cfg *mcbsp_regs_alsa;
+        struct  snd_pcm_hw_constraint_list *hw_constraints_rates;
+        struct  snd_pcm_hardware *snd_omap_alsa_playback;
+        struct  snd_pcm_hardware *snd_omap_alsa_capture;
+        void    (*codec_configure_dev)(void);
+        void    (*codec_set_samplerate)(long);
+        void    (*codec_clock_setup)(void);
+        int     (*codec_clock_on)(void);
+        int     (*codec_clock_off)(void);
+        int     (*get_default_samplerate)(void);
+};
+
+/*********** Mixer function prototypes *************************/
+int snd_omap_mixer(struct snd_card_omap_codec *);
+void snd_omap_init_mixer(void);
+
+#ifdef CONFIG_PM
+void snd_omap_suspend_mixer(void);
+void snd_omap_resume_mixer(void);
+#endif
+
+int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config);
+int snd_omap_alsa_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state);
+int snd_omap_alsa_resume(struct platform_device *pdev);
+#else
+#define snd_omap_alsa_suspend   NULL
+#define snd_omap_alsa_resume    NULL
+#endif
+
+void callback_omap_alsa_sound_dma(void *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
new file mode 100644
index 00000000000..0840df813f4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
@@ -0,0 +1,352 @@
+/*
+ * omap-pm.h - OMAP power management interface
+ *
+ * Copyright (C) 2008-2010 Texas Instruments, Inc.
+ * Copyright (C) 2008-2010 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Interface developed by (in alphabetical order): Karthik Dasu, Jouni
+ * Högander, Tony Lindgren, Rajendra Nayak, Sakari Poussa,
+ * Veeramanikandan Raju, Anand Sawant, Igor Stoppa, Paul Walmsley,
+ * Richard Woodruff
+ */
+
+#ifndef ASM_ARM_ARCH_OMAP_OMAP_PM_H
+#define ASM_ARM_ARCH_OMAP_OMAP_PM_H
+
+#include <linux/device.h>
+#include <linux/cpufreq.h>
+#include <linux/clk.h>
+#include <linux/opp.h>
+
+/*
+ * agent_id values for use with omap_pm_set_min_bus_tput():
+ *
+ * OCP_INITIATOR_AGENT is only valid for devices that can act as
+ * initiators -- it represents the device's L3 interconnect
+ * connection.  OCP_TARGET_AGENT represents the device's L4
+ * interconnect connection.
+ */
+#define OCP_TARGET_AGENT                1
+#define OCP_INITIATOR_AGENT             2
+
+/**
+ * omap_pm_if_early_init - OMAP PM init code called before clock fw init
+ * @mpu_opp_table: array ptr to struct omap_opp for MPU
+ * @dsp_opp_table: array ptr to struct omap_opp for DSP
+ * @l3_opp_table : array ptr to struct omap_opp for CORE
+ *
+ * Initialize anything that must be configured before the clock
+ * framework starts.  The "_if_" is to avoid name collisions with the
+ * PM idle-loop code.
+ */
+int __init omap_pm_if_early_init(void);
+
+/**
+ * omap_pm_if_init - OMAP PM init code called after clock fw init
+ *
+ * The main initialization code.  OPP tables are passed in here.  The
+ * "_if_" is to avoid name collisions with the PM idle-loop code.
+ */
+int __init omap_pm_if_init(void);
+
+/**
+ * omap_pm_if_exit - OMAP PM exit code
+ *
+ * Exit code; currently unused.  The "_if_" is to avoid name
+ * collisions with the PM idle-loop code.
+ */
+void omap_pm_if_exit(void);
+
+/*
+ * Device-driver-originated constraints (via board-*.c files, platform_data)
+ */
+
+
+/**
+ * omap_pm_set_max_mpu_wakeup_lat - set the maximum MPU wakeup latency
+ * @dev: struct device * requesting the constraint
+ * @t: maximum MPU wakeup latency in microseconds
+ *
+ * Request that the maximum interrupt latency for the MPU to be no
+ * greater than @t microseconds. "Interrupt latency" in this case is
+ * defined as the elapsed time from the occurrence of a hardware or
+ * timer interrupt to the time when the device driver's interrupt
+ * service routine has been entered by the MPU.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the MPU powerdomain into, and
+ * possibly the CORE powerdomain as well, since interrupt handling
+ * code currently runs from SDRAM.  Advanced PM or board*.c code may
+ * also configure interrupt controller priorities, OCP bus priorities,
+ * CPU speed(s), etc.
+ *
+ * This function will not affect device wakeup latency, e.g., time
+ * elapsed from when a device driver enables a hardware device with
+ * clk_enable(), to when the device is ready for register access or
+ * other use.  To control this device wakeup latency, use
+ * omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Multiple calls to omap_pm_set_max_mpu_wakeup_lat() will replace the
+ * previous t value.  To remove the latency target for the MPU, call
+ * with t = -1.
+ *
+ * XXX This constraint will be deprecated soon in favor of the more
+ * general omap_pm_set_max_dev_wakeup_lat()
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_bus_tput - set minimum bus throughput needed by device
+ * @dev: struct device * requesting the constraint
+ * @tbus_id: interconnect to operate on (OCP_{INITIATOR,TARGET}_AGENT)
+ * @r: minimum throughput (in KiB/s)
+ *
+ * Request that the minimum data throughput on the OCP interconnect
+ * attached to device @dev interconnect agent @tbus_id be no less
+ * than @r KiB/s.
+ *
+ * It is expected that the OMAP PM or bus code will use this
+ * information to set the interconnect clock to run at the lowest
+ * possible speed that satisfies all current system users.  The PM or
+ * bus code will adjust the estimate based on its model of the bus, so
+ * device driver authors should attempt to specify an accurate
+ * quantity for their device use case, and let the PM or bus code
+ * overestimate the numbers as necessary to handle request/response
+ * latency, other competing users on the system, etc.  On OMAP2/3, if
+ * a driver requests a minimum L4 interconnect speed constraint, the
+ * code will also need to add an minimum L3 interconnect speed
+ * constraint,
+ *
+ * Multiple calls to omap_pm_set_min_bus_tput() will replace the
+ * previous rate value for this device.  To remove the interconnect
+ * throughput restriction for this device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r);
+
+
+/**
+ * omap_pm_set_max_dev_wakeup_lat - set the maximum device enable latency
+ * @req_dev: struct device * requesting the constraint, or NULL if none
+ * @dev: struct device * to set the constraint one
+ * @t: maximum device wakeup latency in microseconds
+ *
+ * Request that the maximum amount of time necessary for a device @dev
+ * to become accessible after its clocks are enabled should be no
+ * greater than @t microseconds.  Specifically, this represents the
+ * time from when a device driver enables device clocks with
+ * clk_enable(), to when the register reads and writes on the device
+ * will succeed.  This function should be called before clk_disable()
+ * is called, since the power state transition decision may be made
+ * during clk_disable().
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the powerdomain enclosing this
+ * device into.
+ *
+ * Multiple calls to omap_pm_set_max_dev_wakeup_lat() will replace the
+ * previous wakeup latency values for this device.  To remove the
+ * wakeup latency restriction for this device, call with t = -1.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev,
+                                   long t);
+
+
+/**
+ * omap_pm_set_max_sdma_lat - set the maximum system DMA transfer start latency
+ * @dev: struct device *
+ * @t: maximum DMA transfer start latency in microseconds
+ *
+ * Request that the maximum system DMA transfer start latency for this
+ * device 'dev' should be no greater than 't' microseconds.  "DMA
+ * transfer start latency" here is defined as the elapsed time from
+ * when a device (e.g., McBSP) requests that a system DMA transfer
+ * start or continue, to the time at which data starts to flow into
+ * that device from the system DMA controller.
+ *
+ * It is intended that underlying PM code will use this information to
+ * determine what power state to put the CORE powerdomain into.
+ *
+ * Since system DMA transfers may not involve the MPU, this function
+ * will not affect MPU wakeup latency.  Use set_max_cpu_lat() to do
+ * so.  Similarly, this function will not affect device wakeup latency
+ * -- use set_max_dev_wakeup_lat() to affect that.
+ *
+ * Multiple calls to set_max_sdma_lat() will replace the previous t
+ * value for this device.  To remove the maximum DMA latency for this
+ * device, call with t = -1.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_max_sdma_lat(struct device *dev, long t);
+
+
+/**
+ * omap_pm_set_min_clk_rate - set minimum clock rate requested by @dev
+ * @dev: struct device * requesting the constraint
+ * @clk: struct clk * to set the minimum rate constraint on
+ * @r: minimum rate in Hz
+ *
+ * Request that the minimum clock rate on the device @dev's clk @clk
+ * be no less than @r Hz.
+ *
+ * It is expected that the OMAP PM code will use this information to
+ * find an OPP or clock setting that will satisfy this clock rate
+ * constraint, along with any other applicable system constraints on
+ * the clock rate or corresponding voltage, etc.
+ *
+ * omap_pm_set_min_clk_rate() differs from the clock code's
+ * clk_set_rate() in that it considers other constraints before taking
+ * any hardware action, and may change a system OPP rather than just a
+ * clock rate.  clk_set_rate() is intended to be a low-level
+ * interface.
+ *
+ * omap_pm_set_min_clk_rate() is easily open to abuse.  A better API
+ * would be something like "omap_pm_set_min_dev_performance()";
+ * however, there is no easily-generalizable concept of performance
+ * that applies to all devices.  Only a device (and possibly the
+ * device subsystem) has both the subsystem-specific knowledge, and
+ * the hardware IP block-specific knowledge, to translate a constraint
+ * on "touchscreen sampling accuracy" or "number of pixels or polygons
+ * rendered per second" to a clock rate.  This translation can be
+ * dependent on the hardware IP block's revision, or firmware version,
+ * and the driver is the only code on the system that has this
+ * information and can know how to translate that into a clock rate.
+ *
+ * The intended use-case for this function is for userspace or other
+ * kernel code to communicate a particular performance requirement to
+ * a subsystem; then for the subsystem to communicate that requirement
+ * to something that is meaningful to the device driver; then for the
+ * device driver to convert that requirement to a clock rate, and to
+ * then call omap_pm_set_min_clk_rate().
+ *
+ * Users of this function (such as device drivers) should not simply
+ * call this function with some high clock rate to ensure "high
+ * performance."  Rather, the device driver should take a performance
+ * constraint from its subsystem, such as "render at least X polygons
+ * per second," and use some formula or table to convert that into a
+ * clock rate constraint given the hardware type and hardware
+ * revision.  Device drivers or subsystems should not assume that they
+ * know how to make a power/performance tradeoff - some device use
+ * cases may tolerate a lower-fidelity device function for lower power
+ * consumption; others may demand a higher-fidelity device function,
+ * no matter what the power consumption.
+ *
+ * Multiple calls to omap_pm_set_min_clk_rate() will replace the
+ * previous rate value for the device @dev.  To remove the minimum clock
+ * rate constraint for the device, call with r = 0.
+ *
+ * Returns -EINVAL for an invalid argument, -ERANGE if the constraint
+ * is not satisfiable, or 0 upon success.
+ */
+int omap_pm_set_min_clk_rate(struct device *dev, struct clk *c, long r);
+
+/*
+ * DSP Bridge-specific constraints
+ */
+
+/**
+ * omap_pm_dsp_get_opp_table - get OPP->DSP clock frequency table
+ *
+ * Intended for use by DSPBridge.  Returns an array of OPP->DSP clock
+ * frequency entries.  The final item in the array should have .rate =
+ * .opp_id = 0.
+ */
+const struct omap_opp *omap_pm_dsp_get_opp_table(void);
+
+/**
+ * omap_pm_dsp_set_min_opp - receive desired OPP target ID from DSP Bridge
+ * @opp_id: target DSP OPP ID
+ *
+ * Set a minimum OPP ID for the DSP.  This is intended to be called
+ * only from the DSP Bridge MPU-side driver.  Unfortunately, the only
+ * information that code receives from the DSP/BIOS load estimator is the
+ * target OPP ID; hence, this interface.  No return value.
+ */
+void omap_pm_dsp_set_min_opp(u8 opp_id);
+
+/**
+ * omap_pm_dsp_get_opp - report the current DSP OPP ID
+ *
+ * Report the current OPP for the DSP.  Since on OMAP3, the DSP and
+ * MPU share a single voltage domain, the OPP ID returned back may
+ * represent a higher DSP speed than the OPP requested via
+ * omap_pm_dsp_set_min_opp().
+ *
+ * Returns the current VDD1 OPP ID, or 0 upon error.
+ */
+u8 omap_pm_dsp_get_opp(void);
+
+
+/*
+ * CPUFreq-originated constraint
+ *
+ * In the future, this should be handled by custom OPP clocktype
+ * functions.
+ */
+
+/**
+ * omap_pm_cpu_get_freq_table - return a cpufreq_frequency_table array ptr
+ *
+ * Provide a frequency table usable by CPUFreq for the current chip/board.
+ * Returns a pointer to a struct cpufreq_frequency_table array or NULL
+ * upon error.
+ */
+struct cpufreq_frequency_table **omap_pm_cpu_get_freq_table(void);
+
+/**
+ * omap_pm_cpu_set_freq - set the current minimum MPU frequency
+ * @f: MPU frequency in Hz
+ *
+ * Set the current minimum CPU frequency.  The actual CPU frequency
+ * used could end up higher if the DSP requested a higher OPP.
+ * Intended to be called by plat-omap/cpu_omap.c:omap_target().  No
+ * return value.
+ */
+void omap_pm_cpu_set_freq(unsigned long f);
+
+/**
+ * omap_pm_cpu_get_freq - report the current CPU frequency
+ *
+ * Returns the current MPU frequency, or 0 upon error.
+ */
+unsigned long omap_pm_cpu_get_freq(void);
+
+
+/*
+ * Device context loss tracking
+ */
+
+/**
+ * omap_pm_get_dev_context_loss_count - return count of times dev has lost ctx
+ * @dev: struct device *
+ *
+ * This function returns the number of times that the device @dev has
+ * lost its internal context.  This generally occurs on a powerdomain
+ * transition to OFF.  Drivers use this as an optimization to avoid restoring
+ * context if the device hasn't lost it.  To use, drivers should initially
+ * call this in their context save functions and store the result.  Early in
+ * the driver's context restore function, the driver should call this function
+ * again, and compare the result to the stored counter.  If they differ, the
+ * driver must restore device context.   If the number of context losses
+ * exceeds the maximum positive integer, the function will wrap to 0 and
+ * continue counting.  Returns the number of context losses for this device,
+ * or zero upon error.
+ */
+u32 omap_pm_get_dev_context_loss_count(struct device *dev);
+
+void omap_pm_enable_off_mode(void);
+void omap_pm_disable_off_mode(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h
new file mode 100644
index 00000000000..2682043f5a5
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -0,0 +1,116 @@
+/*
+ * Driver for OMAP-UART controller.
+ * Based on drivers/serial/8250.c
+ *
+ * Copyright (C) 2010 Texas Instruments.
+ *
+ * Authors:
+ *      Govindraj R     <govindraj.raja@ti.com>
+ *      Thara Gopinath  <thara@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __OMAP_SERIAL_H__
+#define __OMAP_SERIAL_H__
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <plat/mux.h>
+
+#define DRIVER_NAME     "omap_uart"
+
+/*
+ * Use tty device name as ttyO, [O -> OMAP]
+ * in bootargs we specify as console=ttyO0 if uart1
+ * is used as console uart.
+ */
+#define OMAP_SERIAL_NAME        "ttyO"
+
+#define OMAP_MODE13X_SPEED      230400
+
+/* WER = 0x7F
+ * Enable module level wakeup in WER reg
+ */
+#define OMAP_UART_WER_MOD_WKUP  0X7F
+
+/* Enable XON/XOFF flow control on output */
+#define OMAP_UART_SW_TX         0x04
+
+/* Enable XON/XOFF flow control on input */
+#define OMAP_UART_SW_RX         0x04
+
+#define OMAP_UART_SYSC_RESET    0X07
+#define OMAP_UART_TCR_TRIG      0X0F
+#define OMAP_UART_SW_CLR        0XF0
+#define OMAP_UART_FIFO_CLR      0X06
+
+#define OMAP_UART_DMA_CH_FREE   -1
+
+#define RX_TIMEOUT              (3 * HZ)
+#define OMAP_MAX_HSUART_PORTS   4
+
+#define MSR_SAVE_FLAGS          UART_MSR_ANY_DELTA
+
+struct omap_uart_port_info {
+        bool                    dma_enabled;    /* To specify DMA Mode */
+        unsigned int            uartclk;        /* UART clock rate */
+        void __iomem            *membase;       /* ioremap cookie or NULL */
+        resource_size_t         mapbase;        /* resource base */
+        unsigned long           irqflags;       /* request_irq flags */
+        upf_t                   flags;          /* UPF_* flags */
+};
+
+struct uart_omap_dma {
+        u8                      uart_dma_tx;
+        u8                      uart_dma_rx;
+        int                     rx_dma_channel;
+        int                     tx_dma_channel;
+        dma_addr_t              rx_buf_dma_phys;
+        dma_addr_t              tx_buf_dma_phys;
+        unsigned int            uart_base;
+        /*
+         * Buffer for rx dma.It is not required for tx because the buffer
+         * comes from port structure.
+         */
+        unsigned char           *rx_buf;
+        unsigned int            prev_rx_dma_pos;
+        int                     tx_buf_size;
+        int                     tx_dma_used;
+        int                     rx_dma_used;
+        spinlock_t              tx_lock;
+        spinlock_t              rx_lock;
+        /* timer to poll activity on rx dma */
+        struct timer_list       rx_timer;
+        int                     rx_buf_size;
+        int                     rx_timeout;
+};
+
+struct uart_omap_port {
+        struct uart_port        port;
+        struct uart_omap_dma    uart_dma;
+        struct platform_device  *pdev;
+
+        unsigned char           ier;
+        unsigned char           lcr;
+        unsigned char           mcr;
+        unsigned char           fcr;
+        unsigned char           efr;
+
+        int                     use_dma;
+        /*
+         * Some bits in registers are cleared on a read, so they must
+         * be saved whenever the register is read but the bits will not
+         * be immediately processed.
+         */
+        unsigned int            lsr_break_flag;
+        unsigned char           msr_saved_flags;
+        char                    name[20];
+        unsigned long           port_activity;
+};
+
+#endif /* __OMAP_SERIAL_H__ */
diff --git a/arch/arm/plat-omap/include/plat/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h
new file mode 100644
index 00000000000..d2400466813
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap1510.h
@@ -0,0 +1,50 @@
+/* arch/arm/plat-omap/include/mach/omap1510.h
+ *
+ * Hardware definitions for TI OMAP1510 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP15XX_H
+#define __ASM_ARCH_OMAP15XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP1510_DSP_BASE       0xE0000000
+#define OMAP1510_DSP_SIZE       0x28000
+#define OMAP1510_DSP_START      0xE0000000
+
+#define OMAP1510_DSPREG_BASE    0xE1000000
+#define OMAP1510_DSPREG_SIZE    SZ_128K
+#define OMAP1510_DSPREG_START   0xE1000000
+
+#define OMAP1510_DSP_MMU_BASE   (0xfffed200)
+
+#endif /*  __ASM_ARCH_OMAP15XX_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
new file mode 100644
index 00000000000..e69e1d857b4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -0,0 +1,202 @@
+/* arch/arm/plat-omap/include/mach/omap16xx.h
+ *
+ * Hardware definitions for TI OMAP1610/5912/1710 processors.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP16XX_H
+#define __ASM_ARCH_OMAP16XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP16XX_DSP_BASE       0xE0000000
+#define OMAP16XX_DSP_SIZE       0x28000
+#define OMAP16XX_DSP_START      0xE0000000
+
+#define OMAP16XX_DSPREG_BASE    0xE1000000
+#define OMAP16XX_DSPREG_SIZE    SZ_128K
+#define OMAP16XX_DSPREG_START   0xE1000000
+
+#define OMAP16XX_SEC_BASE       0xFFFE4000
+#define OMAP16XX_SEC_DES        (OMAP16XX_SEC_BASE + 0x0000)
+#define OMAP16XX_SEC_SHA1MD5    (OMAP16XX_SEC_BASE + 0x0800)
+#define OMAP16XX_SEC_RNG        (OMAP16XX_SEC_BASE + 0x1000)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Interrupts
+ * ---------------------------------------------------------------------------
+ */
+#define OMAP_IH2_0_BASE         (0xfffe0000)
+#define OMAP_IH2_1_BASE         (0xfffe0100)
+#define OMAP_IH2_2_BASE         (0xfffe0200)
+#define OMAP_IH2_3_BASE         (0xfffe0300)
+
+#define OMAP_IH2_0_ITR          (OMAP_IH2_0_BASE + 0x00)
+#define OMAP_IH2_0_MIR          (OMAP_IH2_0_BASE + 0x04)
+#define OMAP_IH2_0_SIR_IRQ      (OMAP_IH2_0_BASE + 0x10)
+#define OMAP_IH2_0_SIR_FIQ      (OMAP_IH2_0_BASE + 0x14)
+#define OMAP_IH2_0_CONTROL      (OMAP_IH2_0_BASE + 0x18)
+#define OMAP_IH2_0_ILR0         (OMAP_IH2_0_BASE + 0x1c)
+#define OMAP_IH2_0_ISR          (OMAP_IH2_0_BASE + 0x9c)
+
+#define OMAP_IH2_1_ITR          (OMAP_IH2_1_BASE + 0x00)
+#define OMAP_IH2_1_MIR          (OMAP_IH2_1_BASE + 0x04)
+#define OMAP_IH2_1_SIR_IRQ      (OMAP_IH2_1_BASE + 0x10)
+#define OMAP_IH2_1_SIR_FIQ      (OMAP_IH2_1_BASE + 0x14)
+#define OMAP_IH2_1_CONTROL      (OMAP_IH2_1_BASE + 0x18)
+#define OMAP_IH2_1_ILR1         (OMAP_IH2_1_BASE + 0x1c)
+#define OMAP_IH2_1_ISR          (OMAP_IH2_1_BASE + 0x9c)
+
+#define OMAP_IH2_2_ITR          (OMAP_IH2_2_BASE + 0x00)
+#define OMAP_IH2_2_MIR          (OMAP_IH2_2_BASE + 0x04)
+#define OMAP_IH2_2_SIR_IRQ      (OMAP_IH2_2_BASE + 0x10)
+#define OMAP_IH2_2_SIR_FIQ      (OMAP_IH2_2_BASE + 0x14)
+#define OMAP_IH2_2_CONTROL      (OMAP_IH2_2_BASE + 0x18)
+#define OMAP_IH2_2_ILR2         (OMAP_IH2_2_BASE + 0x1c)
+#define OMAP_IH2_2_ISR          (OMAP_IH2_2_BASE + 0x9c)
+
+#define OMAP_IH2_3_ITR          (OMAP_IH2_3_BASE + 0x00)
+#define OMAP_IH2_3_MIR          (OMAP_IH2_3_BASE + 0x04)
+#define OMAP_IH2_3_SIR_IRQ      (OMAP_IH2_3_BASE + 0x10)
+#define OMAP_IH2_3_SIR_FIQ      (OMAP_IH2_3_BASE + 0x14)
+#define OMAP_IH2_3_CONTROL      (OMAP_IH2_3_BASE + 0x18)
+#define OMAP_IH2_3_ILR3         (OMAP_IH2_3_BASE + 0x1c)
+#define OMAP_IH2_3_ISR          (OMAP_IH2_3_BASE + 0x9c)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Clocks
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_ARM_IDLECT3    (CLKGEN_REG_BASE + 0x24)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Pin configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV6   (1 << 8)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV7   (1 << 9)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV8   (1 << 10)
+#define OMAP16XX_CONF_VOLTAGE_VDDSHV9   (1 << 11)
+#define OMAP16XX_SUBLVDS_CONF_VALID     (1 << 13)
+
+/*
+ * ----------------------------------------------------------------------------
+ * System control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP1610_RESET_CONTROL  0xfffe1140
+
+/*
+ * ---------------------------------------------------------------------------
+ * TIPB bus interface
+ * ---------------------------------------------------------------------------
+ */
+#define TIPB_SWITCH_BASE                 (0xfffbc800)
+#define OMAP16XX_MMCSD2_SSW_MPU_CONF    (TIPB_SWITCH_BASE + 0x160)
+
+/* UART3 Registers Mapping through MPU bus */
+#define UART3_RHR               (OMAP1_UART3_BASE + 0)
+#define UART3_THR               (OMAP1_UART3_BASE + 0)
+#define UART3_DLL               (OMAP1_UART3_BASE + 0)
+#define UART3_IER               (OMAP1_UART3_BASE + 4)
+#define UART3_DLH               (OMAP1_UART3_BASE + 4)
+#define UART3_IIR               (OMAP1_UART3_BASE + 8)
+#define UART3_FCR               (OMAP1_UART3_BASE + 8)
+#define UART3_EFR               (OMAP1_UART3_BASE + 8)
+#define UART3_LCR               (OMAP1_UART3_BASE + 0x0C)
+#define UART3_MCR               (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON1_ADDR1        (OMAP1_UART3_BASE + 0x10)
+#define UART3_XON2_ADDR2        (OMAP1_UART3_BASE + 0x14)
+#define UART3_LSR               (OMAP1_UART3_BASE + 0x14)
+#define UART3_TCR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_MSR               (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF1             (OMAP1_UART3_BASE + 0x18)
+#define UART3_XOFF2             (OMAP1_UART3_BASE + 0x1C)
+#define UART3_SPR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_TLR               (OMAP1_UART3_BASE + 0x1C)
+#define UART3_MDR1              (OMAP1_UART3_BASE + 0x20)
+#define UART3_MDR2              (OMAP1_UART3_BASE + 0x24)
+#define UART3_SFLSR             (OMAP1_UART3_BASE + 0x28)
+#define UART3_TXFLL             (OMAP1_UART3_BASE + 0x28)
+#define UART3_RESUME            (OMAP1_UART3_BASE + 0x2C)
+#define UART3_TXFLH             (OMAP1_UART3_BASE + 0x2C)
+#define UART3_SFREGL            (OMAP1_UART3_BASE + 0x30)
+#define UART3_RXFLL             (OMAP1_UART3_BASE + 0x30)
+#define UART3_SFREGH            (OMAP1_UART3_BASE + 0x34)
+#define UART3_RXFLH             (OMAP1_UART3_BASE + 0x34)
+#define UART3_BLR               (OMAP1_UART3_BASE + 0x38)
+#define UART3_ACREG             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_DIV16             (OMAP1_UART3_BASE + 0x3C)
+#define UART3_SCR               (OMAP1_UART3_BASE + 0x40)
+#define UART3_SSR               (OMAP1_UART3_BASE + 0x44)
+#define UART3_EBLR              (OMAP1_UART3_BASE + 0x48)
+#define UART3_OSC_12M_SEL       (OMAP1_UART3_BASE + 0x4C)
+#define UART3_MVR               (OMAP1_UART3_BASE + 0x50)
+
+/*
+ * ---------------------------------------------------------------------------
+ * Watchdog timer
+ * ---------------------------------------------------------------------------
+ */
+
+/* 32-bit Watchdog timer in OMAP 16XX */
+#define OMAP_16XX_WATCHDOG_BASE        (0xfffeb000)
+#define OMAP_16XX_WIDR         (OMAP_16XX_WATCHDOG_BASE + 0x00)
+#define OMAP_16XX_WD_SYSCONFIG (OMAP_16XX_WATCHDOG_BASE + 0x10)
+#define OMAP_16XX_WD_SYSSTATUS (OMAP_16XX_WATCHDOG_BASE + 0x14)
+#define OMAP_16XX_WCLR         (OMAP_16XX_WATCHDOG_BASE + 0x24)
+#define OMAP_16XX_WCRR         (OMAP_16XX_WATCHDOG_BASE + 0x28)
+#define OMAP_16XX_WLDR         (OMAP_16XX_WATCHDOG_BASE + 0x2c)
+#define OMAP_16XX_WTGR         (OMAP_16XX_WATCHDOG_BASE + 0x30)
+#define OMAP_16XX_WWPS         (OMAP_16XX_WATCHDOG_BASE + 0x34)
+#define OMAP_16XX_WSPR         (OMAP_16XX_WATCHDOG_BASE + 0x48)
+
+#define WCLR_PRE_SHIFT         5
+#define WCLR_PTV_SHIFT         2
+
+#define WWPS_W_PEND_WSPR       (1 << 4)
+#define WWPS_W_PEND_WTGR       (1 << 3)
+#define WWPS_W_PEND_WLDR       (1 << 2)
+#define WWPS_W_PEND_WCRR       (1 << 1)
+#define WWPS_W_PEND_WCLR       (1 << 0)
+
+#define WSPR_ENABLE_0          (0x0000bbbb)
+#define WSPR_ENABLE_1          (0x00004444)
+#define WSPR_DISABLE_0         (0x0000aaaa)
+#define WSPR_DISABLE_1         (0x00005555)
+
+#define OMAP16XX_DSP_MMU_BASE   (0xfffed200)
+#define OMAP16XX_MAILBOX_BASE   (0xfffcf000)
+
+#endif /*  __ASM_ARCH_OMAP16XX_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
new file mode 100644
index 00000000000..92df9e27cc5
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
@@ -0,0 +1,89 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap24xx.h
+ *
+ * This file contains the processor specific definitions
+ * of the TI OMAP24XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#ifndef __ASM_ARCH_OMAP2_H
+#define __ASM_ARCH_OMAP2_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers. Note also that some of these defines are needed
+ * for omap1 to compile without adding ifdefs.
+ */
+
+#define L4_24XX_BASE            0x48000000
+#define L4_WK_243X_BASE         0x49000000
+#define L3_24XX_BASE            0x68000000
+
+/* interrupt controller */
+#define OMAP24XX_IC_BASE        (L4_24XX_BASE + 0xfe000)
+#define OMAP24XX_IVA_INTC_BASE  0x40000000
+
+#define OMAP242X_CTRL_BASE      L4_24XX_BASE
+#define OMAP2420_32KSYNCT_BASE  (L4_24XX_BASE + 0x4000)
+#define OMAP2420_PRCM_BASE      (L4_24XX_BASE + 0x8000)
+#define OMAP2420_CM_BASE        (L4_24XX_BASE + 0x8000)
+#define OMAP2420_PRM_BASE       OMAP2420_CM_BASE
+#define OMAP2420_SDRC_BASE      (L3_24XX_BASE + 0x9000)
+#define OMAP2420_SMS_BASE       0x68008000
+#define OMAP2420_GPMC_BASE      0x6800a000
+
+#define OMAP2430_32KSYNCT_BASE  (L4_WK_243X_BASE + 0x20000)
+#define OMAP2430_PRCM_BASE      (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_CM_BASE        (L4_WK_243X_BASE + 0x6000)
+#define OMAP2430_PRM_BASE       OMAP2430_CM_BASE
+
+#define OMAP243X_SMS_BASE       0x6C000000
+#define OMAP243X_SDRC_BASE      0x6D000000
+#define OMAP243X_GPMC_BASE      0x6E000000
+#define OMAP243X_SCM_BASE       (L4_WK_243X_BASE + 0x2000)
+#define OMAP243X_CTRL_BASE      OMAP243X_SCM_BASE
+#define OMAP243X_HS_BASE        (L4_24XX_BASE + 0x000ac000)
+
+/* DSP SS */
+#define OMAP2420_DSP_BASE       0x58000000
+#define OMAP2420_DSP_MEM_BASE   (OMAP2420_DSP_BASE + 0x0)
+#define OMAP2420_DSP_IPI_BASE   (OMAP2420_DSP_BASE + 0x1000000)
+#define OMAP2420_DSP_MMU_BASE   (OMAP2420_DSP_BASE + 0x2000000)
+
+#define OMAP243X_DSP_BASE       0x5C000000
+#define OMAP243X_DSP_MEM_BASE   (OMAP243X_DSP_BASE + 0x0)
+#define OMAP243X_DSP_MMU_BASE   (OMAP243X_DSP_BASE + 0x1000000)
+
+/* Mailbox */
+#define OMAP24XX_MAILBOX_BASE   (L4_24XX_BASE + 0x94000)
+
+/* Camera */
+#define OMAP24XX_CAMERA_BASE    (L4_24XX_BASE + 0x52000)
+
+/* Security */
+#define OMAP24XX_SEC_BASE       (L4_24XX_BASE + 0xA0000)
+#define OMAP24XX_SEC_RNG_BASE   (OMAP24XX_SEC_BASE + 0x0000)
+#define OMAP24XX_SEC_DES_BASE   (OMAP24XX_SEC_BASE + 0x2000)
+#define OMAP24XX_SEC_SHA1MD5_BASE (OMAP24XX_SEC_BASE + 0x4000)
+#define OMAP24XX_SEC_AES_BASE   (OMAP24XX_SEC_BASE + 0x6000)
+#define OMAP24XX_SEC_PKA_BASE   (OMAP24XX_SEC_BASE + 0x8000)
+
+#endif /* __ASM_ARCH_OMAP2_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
new file mode 100644
index 00000000000..b9e85886b9d
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -0,0 +1,99 @@
+/*
+ * arch/arm/plat-omap/include/mach/omap34xx.h
+ *
+ * This file contains the processor specific definitions of the TI OMAP34XX.
+ *
+ * Copyright (C) 2007 Texas Instruments.
+ * Copyright (C) 2007 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_OMAP3_H
+#define __ASM_ARCH_OMAP3_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+
+#define L4_34XX_BASE            0x48000000
+#define L4_WK_34XX_BASE         0x48300000
+#define L4_PER_34XX_BASE        0x49000000
+#define L4_EMU_34XX_BASE        0x54000000
+#define L3_34XX_BASE            0x68000000
+
+#define OMAP3430_32KSYNCT_BASE  0x48320000
+#define OMAP3430_CM_BASE        0x48004800
+#define OMAP3430_PRM_BASE       0x48306800
+#define OMAP343X_SMS_BASE       0x6C000000
+#define OMAP343X_SDRC_BASE      0x6D000000
+#define OMAP34XX_GPMC_BASE      0x6E000000
+#define OMAP343X_SCM_BASE       0x48002000
+#define OMAP343X_CTRL_BASE      OMAP343X_SCM_BASE
+
+#define OMAP34XX_IC_BASE        0x48200000
+
+#define OMAP3430_ISP_BASE               (L4_34XX_BASE + 0xBC000)
+#define OMAP3430_ISP_CBUFF_BASE         (OMAP3430_ISP_BASE + 0x0100)
+#define OMAP3430_ISP_CCP2_BASE          (OMAP3430_ISP_BASE + 0x0400)
+#define OMAP3430_ISP_CCDC_BASE          (OMAP3430_ISP_BASE + 0x0600)
+#define OMAP3430_ISP_HIST_BASE          (OMAP3430_ISP_BASE + 0x0A00)
+#define OMAP3430_ISP_H3A_BASE           (OMAP3430_ISP_BASE + 0x0C00)
+#define OMAP3430_ISP_PREV_BASE          (OMAP3430_ISP_BASE + 0x0E00)
+#define OMAP3430_ISP_RESZ_BASE          (OMAP3430_ISP_BASE + 0x1000)
+#define OMAP3430_ISP_SBL_BASE           (OMAP3430_ISP_BASE + 0x1200)
+#define OMAP3430_ISP_MMU_BASE           (OMAP3430_ISP_BASE + 0x1400)
+#define OMAP3430_ISP_CSI2A_REGS1_BASE   (OMAP3430_ISP_BASE + 0x1800)
+#define OMAP3430_ISP_CSIPHY2_BASE       (OMAP3430_ISP_BASE + 0x1970)
+#define OMAP3630_ISP_CSI2A_REGS2_BASE   (OMAP3430_ISP_BASE + 0x19C0)
+#define OMAP3630_ISP_CSI2C_REGS1_BASE   (OMAP3430_ISP_BASE + 0x1C00)
+#define OMAP3630_ISP_CSIPHY1_BASE       (OMAP3430_ISP_BASE + 0x1D70)
+#define OMAP3630_ISP_CSI2C_REGS2_BASE   (OMAP3430_ISP_BASE + 0x1DC0)
+
+#define OMAP3430_ISP_END                (OMAP3430_ISP_BASE         + 0x06F)
+#define OMAP3430_ISP_CBUFF_END          (OMAP3430_ISP_CBUFF_BASE   + 0x077)
+#define OMAP3430_ISP_CCP2_END           (OMAP3430_ISP_CCP2_BASE    + 0x1EF)
+#define OMAP3430_ISP_CCDC_END           (OMAP3430_ISP_CCDC_BASE    + 0x0A7)
+#define OMAP3430_ISP_HIST_END           (OMAP3430_ISP_HIST_BASE    + 0x047)
+#define OMAP3430_ISP_H3A_END            (OMAP3430_ISP_H3A_BASE     + 0x05F)
+#define OMAP3430_ISP_PREV_END           (OMAP3430_ISP_PREV_BASE    + 0x09F)
+#define OMAP3430_ISP_RESZ_END           (OMAP3430_ISP_RESZ_BASE    + 0x0AB)
+#define OMAP3430_ISP_SBL_END            (OMAP3430_ISP_SBL_BASE     + 0x0FB)
+#define OMAP3430_ISP_MMU_END            (OMAP3430_ISP_MMU_BASE     + 0x06F)
+#define OMAP3430_ISP_CSI2A_REGS1_END    (OMAP3430_ISP_CSI2A_REGS1_BASE + 0x16F)
+#define OMAP3430_ISP_CSIPHY2_END        (OMAP3430_ISP_CSIPHY2_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2A_REGS2_END    (OMAP3630_ISP_CSI2A_REGS2_BASE + 0x3F)
+#define OMAP3630_ISP_CSI2C_REGS1_END    (OMAP3630_ISP_CSI2C_REGS1_BASE + 0x16F)
+#define OMAP3630_ISP_CSIPHY1_END        (OMAP3630_ISP_CSIPHY1_BASE + 0x00B)
+#define OMAP3630_ISP_CSI2C_REGS2_END    (OMAP3630_ISP_CSI2C_REGS2_BASE + 0x3F)
+
+#define OMAP34XX_HSUSB_OTG_BASE (L4_34XX_BASE + 0xAB000)
+#define OMAP34XX_USBTLL_BASE    (L4_34XX_BASE + 0x62000)
+#define OMAP34XX_UHH_CONFIG_BASE        (L4_34XX_BASE + 0x64000)
+#define OMAP34XX_OHCI_BASE      (L4_34XX_BASE + 0x64400)
+#define OMAP34XX_EHCI_BASE      (L4_34XX_BASE + 0x64800)
+#define OMAP34XX_SR1_BASE       0x480C9000
+#define OMAP34XX_SR2_BASE       0x480CB000
+
+#define OMAP34XX_MAILBOX_BASE           (L4_34XX_BASE + 0x94000)
+
+/* Security */
+#define OMAP34XX_SEC_BASE       (L4_34XX_BASE + 0xA0000)
+#define OMAP34XX_SEC_SHA1MD5_BASE       (OMAP34XX_SEC_BASE + 0x23000)
+#define OMAP34XX_SEC_AES_BASE   (OMAP34XX_SEC_BASE + 0x25000)
+
+#endif /* __ASM_ARCH_OMAP3_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h
new file mode 100644
index 00000000000..9fe6c878323
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h
@@ -0,0 +1,15 @@
+#ifndef ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+#define ARCH_ARM_PLAT_OMAP4_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+struct omap4_keypad_platform_data {
+        const struct matrix_keymap_data *keymap_data;
+
+        u8 rows;
+        u8 cols;
+};
+
+extern int omap4_keyboard_init(struct omap4_keypad_platform_data *,
+                                struct omap_board_data *);
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
new file mode 100644
index 00000000000..ea2b8a6306e
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -0,0 +1,61 @@
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE                    0x4a000000
+#define L4_WK_44XX_BASE                 0x4a300000
+#define L4_PER_44XX_BASE                0x48000000
+#define L4_EMU_44XX_BASE                0x54000000
+#define L3_44XX_BASE                    0x44000000
+#define OMAP44XX_EMIF1_BASE             0x4c000000
+#define OMAP44XX_EMIF2_BASE             0x4d000000
+#define OMAP44XX_DMM_BASE               0x4e000000
+#define OMAP4430_32KSYNCT_BASE          0x4a304000
+#define OMAP4430_CM1_BASE               0x4a004000
+#define OMAP4430_CM_BASE                OMAP4430_CM1_BASE
+#define OMAP4430_CM2_BASE               0x4a008000
+#define OMAP4430_PRM_BASE               0x4a306000
+#define OMAP4430_PRCM_MPU_BASE          0x48243000
+#define OMAP44XX_GPMC_BASE              0x50000000
+#define OMAP443X_SCM_BASE               0x4a002000
+#define OMAP443X_CTRL_BASE              0x4a100000
+#define OMAP44XX_IC_BASE                0x48200000
+#define OMAP44XX_IVA_INTC_BASE          0x40000000
+#define IRQ_SIR_IRQ                     0x0040
+#define OMAP44XX_GIC_DIST_BASE          0x48241000
+#define OMAP44XX_GIC_CPU_BASE           0x48240100
+#define OMAP44XX_SCU_BASE               0x48240000
+#define OMAP44XX_LOCAL_TWD_BASE         0x48240600
+#define OMAP44XX_L2CACHE_BASE           0x48242000
+#define OMAP44XX_WKUPGEN_BASE           0x48281000
+#define OMAP44XX_MCPDM_BASE             0x40132000
+#define OMAP44XX_MCPDM_L3_BASE          0x49032000
+
+#define OMAP44XX_MAILBOX_BASE           (L4_44XX_BASE + 0xF4000)
+#define OMAP44XX_HSUSB_OTG_BASE         (L4_44XX_BASE + 0xAB000)
+
+#define OMAP4_MMU1_BASE                 0x55082000
+#define OMAP4_MMU2_BASE                 0x4A066000
+
+#define OMAP44XX_USBTLL_BASE            (L4_44XX_BASE + 0x62000)
+#define OMAP44XX_UHH_CONFIG_BASE        (L4_44XX_BASE + 0x64000)
+#define OMAP44XX_HSUSB_OHCI_BASE        (L4_44XX_BASE + 0x64800)
+#define OMAP44XX_HSUSB_EHCI_BASE        (L4_44XX_BASE + 0x64C00)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h
new file mode 100644
index 00000000000..14272bc1a6f
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap730.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap730.h
+ *
+ * Hardware definitions for TI OMAP730 processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP730_H
+#define __ASM_ARCH_OMAP730_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP730_DSP_BASE        0xE0000000
+#define OMAP730_DSP_SIZE        0x50000
+#define OMAP730_DSP_START       0xE0000000
+
+#define OMAP730_DSPREG_BASE     0xE1000000
+#define OMAP730_DSPREG_SIZE     SZ_128K
+#define OMAP730_DSPREG_START    0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_CONFIG_BASE     0xfffe1000
+#define OMAP730_IO_CONF_0       0xfffe1070
+#define OMAP730_IO_CONF_1       0xfffe1074
+#define OMAP730_IO_CONF_2       0xfffe1078
+#define OMAP730_IO_CONF_3       0xfffe107c
+#define OMAP730_IO_CONF_4       0xfffe1080
+#define OMAP730_IO_CONF_5       0xfffe1084
+#define OMAP730_IO_CONF_6       0xfffe1088
+#define OMAP730_IO_CONF_7       0xfffe108c
+#define OMAP730_IO_CONF_8       0xfffe1090
+#define OMAP730_IO_CONF_9       0xfffe1094
+#define OMAP730_IO_CONF_10      0xfffe1098
+#define OMAP730_IO_CONF_11      0xfffe109c
+#define OMAP730_IO_CONF_12      0xfffe10a0
+#define OMAP730_IO_CONF_13      0xfffe10a4
+
+#define OMAP730_MODE_1          0xfffe1010
+#define OMAP730_MODE_2          0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP730_MODE2_OFFSET    0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_FLASH_CFG_0     0xfffecc10
+#define OMAP730_FLASH_ACFG_0    0xfffecc50
+#define OMAP730_FLASH_CFG_1     0xfffecc14
+#define OMAP730_FLASH_ACFG_1    0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_ICR_BASE        0xfffbb800
+#define OMAP730_DSP_M_CTL       0xfffbb804
+#define OMAP730_DSP_MMU_BASE    0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP730 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP730_PCC_UPLD_CTRL_BASE      (0xfffe0900)
+#define OMAP730_PCC_UPLD_CTRL           (OMAP730_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP730_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
new file mode 100644
index 00000000000..48e4757e1e3
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -0,0 +1,107 @@
+/* arch/arm/plat-omap/include/mach/omap7xx.h
+ *
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE        0xE0000000
+#define OMAP7XX_DSP_SIZE        0x50000
+#define OMAP7XX_DSP_START       0xE0000000
+
+#define OMAP7XX_DSPREG_BASE     0xE1000000
+#define OMAP7XX_DSPREG_SIZE     SZ_128K
+#define OMAP7XX_DSPREG_START    0xE1000000
+
+#define OMAP7XX_SPI1_BASE       0xfffc0800
+#define OMAP7XX_SPI2_BASE       0xfffc1000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE     0xfffe1000
+#define OMAP7XX_IO_CONF_0       0xfffe1070
+#define OMAP7XX_IO_CONF_1       0xfffe1074
+#define OMAP7XX_IO_CONF_2       0xfffe1078
+#define OMAP7XX_IO_CONF_3       0xfffe107c
+#define OMAP7XX_IO_CONF_4       0xfffe1080
+#define OMAP7XX_IO_CONF_5       0xfffe1084
+#define OMAP7XX_IO_CONF_6       0xfffe1088
+#define OMAP7XX_IO_CONF_7       0xfffe108c
+#define OMAP7XX_IO_CONF_8       0xfffe1090
+#define OMAP7XX_IO_CONF_9       0xfffe1094
+#define OMAP7XX_IO_CONF_10      0xfffe1098
+#define OMAP7XX_IO_CONF_11      0xfffe109c
+#define OMAP7XX_IO_CONF_12      0xfffe10a0
+#define OMAP7XX_IO_CONF_13      0xfffe10a4
+
+#define OMAP7XX_MODE_1          0xfffe1010
+#define OMAP7XX_MODE_2          0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET    0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0     0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0    0xfffecc50
+#define OMAP7XX_FLASH_CFG_1     0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1    0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE        0xfffbb800
+#define OMAP7XX_DSP_M_CTL       0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE    0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE      (0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL           (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h
new file mode 100644
index 00000000000..c33f6798171
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap850.h
@@ -0,0 +1,102 @@
+/* arch/arm/plat-omap/include/mach/omap850.h
+ *
+ * Hardware definitions for TI OMAP850 processor.
+ *
+ * Derived from omap730.h by Zebediah C. McClure <zmc@lurian.net>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP850_H
+#define __ASM_ARCH_OMAP850_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP850_DSP_BASE        0xE0000000
+#define OMAP850_DSP_SIZE        0x50000
+#define OMAP850_DSP_START       0xE0000000
+
+#define OMAP850_DSPREG_BASE     0xE1000000
+#define OMAP850_DSPREG_SIZE     SZ_128K
+#define OMAP850_DSPREG_START    0xE1000000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_CONFIG_BASE     0xfffe1000
+#define OMAP850_IO_CONF_0       0xfffe1070
+#define OMAP850_IO_CONF_1       0xfffe1074
+#define OMAP850_IO_CONF_2       0xfffe1078
+#define OMAP850_IO_CONF_3       0xfffe107c
+#define OMAP850_IO_CONF_4       0xfffe1080
+#define OMAP850_IO_CONF_5       0xfffe1084
+#define OMAP850_IO_CONF_6       0xfffe1088
+#define OMAP850_IO_CONF_7       0xfffe108c
+#define OMAP850_IO_CONF_8       0xfffe1090
+#define OMAP850_IO_CONF_9       0xfffe1094
+#define OMAP850_IO_CONF_10      0xfffe1098
+#define OMAP850_IO_CONF_11      0xfffe109c
+#define OMAP850_IO_CONF_12      0xfffe10a0
+#define OMAP850_IO_CONF_13      0xfffe10a4
+
+#define OMAP850_MODE_1          0xfffe1010
+#define OMAP850_MODE_2          0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP850_MODE2_OFFSET    0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_FLASH_CFG_0     0xfffecc10
+#define OMAP850_FLASH_ACFG_0    0xfffecc50
+#define OMAP850_FLASH_CFG_1     0xfffecc14
+#define OMAP850_FLASH_ACFG_1    0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_ICR_BASE        0xfffbb800
+#define OMAP850_DSP_M_CTL       0xfffbb804
+#define OMAP850_DSP_MMU_BASE    0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP850 PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP850_PCC_UPLD_CTRL_BASE      (0xfffe0900)
+#define OMAP850_PCC_UPLD_CTRL           (OMAP850_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP850_H */
+
diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
new file mode 100644
index 00000000000..ee405b36df4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -0,0 +1,162 @@
+/*
+ * omap_device headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Paul Walmsley
+ *
+ * Developed in collaboration with (alphabetical order): Benoit
+ * Cousson, Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram
+ * Pandita, Sakari Poussa, Anand Sawant, Santosh Shilimkar, Richard
+ * Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Eventually this type of functionality should either be
+ * a) implemented via arch-specific pointers in platform_device
+ * or
+ * b) implemented as a proper omap_bus/omap_device in Linux, no more
+ *    platform_device
+ *
+ * omap_device differs from omap_hwmod in that it includes external
+ * (e.g., board- and system-level) integration details.  omap_hwmod
+ * stores hardware data that is invariant for a given OMAP chip.
+ *
+ * To do:
+ * - GPIO integration
+ * - regulator integration
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_DEVICE_H
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+
+#include <plat/omap_hwmod.h>
+
+extern struct device omap_device_parent;
+
+/* omap_device._state values */
+#define OMAP_DEVICE_STATE_UNKNOWN       0
+#define OMAP_DEVICE_STATE_ENABLED       1
+#define OMAP_DEVICE_STATE_IDLE          2
+#define OMAP_DEVICE_STATE_SHUTDOWN      3
+
+/* omap_device.flags values */
+#define OMAP_DEVICE_SUSPENDED BIT(0)
+#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1)
+
+/**
+ * struct omap_device - omap_device wrapper for platform_devices
+ * @pdev: platform_device
+ * @hwmods: (one .. many per omap_device)
+ * @hwmods_cnt: ARRAY_SIZE() of @hwmods
+ * @pm_lats: ptr to an omap_device_pm_latency table
+ * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
+ * @pm_lat_level: array index of the last odpl entry executed - -1 if never
+ * @dev_wakeup_lat: dev wakeup latency in nanoseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
+ * @_state: one of OMAP_DEVICE_STATE_* (see above)
+ * @flags: device flags
+ *
+ * Integrates omap_hwmod data into Linux platform_device.
+ *
+ * Field names beginning with underscores are for the internal use of
+ * the omap_device code.
+ *
+ */
+struct omap_device {
+        struct platform_device          pdev;
+        struct omap_hwmod               **hwmods;
+        struct omap_device_pm_latency   *pm_lats;
+        u32                             dev_wakeup_lat;
+        u32                             _dev_wakeup_lat_limit;
+        u8                              pm_lats_cnt;
+        s8                              pm_lat_level;
+        u8                              hwmods_cnt;
+        u8                              _state;
+        u8                              flags;
+};
+
+/* Device driver interface (call via platform_data fn ptrs) */
+
+int omap_device_enable(struct platform_device *pdev);
+int omap_device_idle(struct platform_device *pdev);
+int omap_device_shutdown(struct platform_device *pdev);
+
+/* Core code interface */
+
+int omap_device_count_resources(struct omap_device *od);
+int omap_device_fill_resources(struct omap_device *od, struct resource *res);
+
+struct omap_device *omap_device_build(const char *pdev_name, int pdev_id,
+                                      struct omap_hwmod *oh, void *pdata,
+                                      int pdata_len,
+                                      struct omap_device_pm_latency *pm_lats,
+                                      int pm_lats_cnt, int is_early_device);
+
+struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
+                                         struct omap_hwmod **oh, int oh_cnt,
+                                         void *pdata, int pdata_len,
+                                         struct omap_device_pm_latency *pm_lats,
+                                         int pm_lats_cnt, int is_early_device);
+
+int omap_device_register(struct omap_device *od);
+int omap_early_device_register(struct omap_device *od);
+
+void __iomem *omap_device_get_rt_va(struct omap_device *od);
+
+/* OMAP PM interface */
+int omap_device_align_pm_lat(struct platform_device *pdev,
+                             u32 new_wakeup_lat_limit);
+struct powerdomain *omap_device_get_pwrdm(struct omap_device *od);
+u32 omap_device_get_context_loss_count(struct platform_device *pdev);
+
+/* Other */
+
+int omap_device_idle_hwmods(struct omap_device *od);
+int omap_device_enable_hwmods(struct omap_device *od);
+
+int omap_device_disable_clocks(struct omap_device *od);
+int omap_device_enable_clocks(struct omap_device *od);
+
+static inline void omap_device_disable_idle_on_suspend(struct omap_device *od)
+{
+        od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND;
+}
+
+/*
+ * Entries should be kept in latency order ascending
+ *
+ * deact_lat is the maximum number of microseconds required to complete
+ * deactivate_func() at the device's slowest OPP.
+ *
+ * act_lat is the maximum number of microseconds required to complete
+ * activate_func() at the device's slowest OPP.
+ *
+ * This will result in some suboptimal power management decisions at fast
+ * OPPs, but avoids having to recompute all device power management decisions
+ * if the system shifts from a fast OPP to a slow OPP (in order to meet
+ * latency requirements).
+ *
+ * XXX should deactivate_func/activate_func() take platform_device pointers
+ * rather than omap_device pointers?
+ */
+struct omap_device_pm_latency {
+        u32 deactivate_lat;
+        u32 deactivate_lat_worst;
+        int (*deactivate_func)(struct omap_device *od);
+        u32 activate_lat;
+        u32 activate_lat_worst;
+        int (*activate_func)(struct omap_device *od);
+        u32 flags;
+};
+
+#define OMAP_DEVICE_LATENCY_AUTO_ADJUST BIT(1)
+
+/* Get omap_device pointer from platform_device pointer */
+#define to_omap_device(x) container_of((x), struct omap_device, pdev)
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
new file mode 100644
index 00000000000..0e329ca88a7
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -0,0 +1,619 @@
+/*
+ * omap_hwmod macros, structures
+ *
+ * Copyright (C) 2009-2011 Nokia Corporation
+ * Copyright (C) 2011 Texas Instruments, Inc.
+ * Paul Walmsley
+ *
+ * Created in collaboration with (alphabetical order): Benoît Cousson,
+ * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari
+ * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These headers and macros are used to define OMAP on-chip module
+ * data and their integration with other OMAP modules and Linux.
+ * Copious documentation and references can also be found in the
+ * omap_hwmod code, in arch/arm/mach-omap2/omap_hwmod.c (as of this
+ * writing).
+ *
+ * To do:
+ * - add interconnect error log structures
+ * - add pinmuxing
+ * - init_conn_id_bit (CONNID_BIT_VECTOR)
+ * - implement default hwmod SMS/SDRC flags?
+ * - move Linux-specific data ("non-ROM data") out
+ *
+ */
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <plat/cpu.h>
+
+struct omap_device;
+
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type1;
+extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2;
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE1. These are for IPs compliant
+ * with the original PRCM protocol defined for OMAP2420
+ */
+#define SYSC_TYPE1_MIDLEMODE_SHIFT      12
+#define SYSC_TYPE1_MIDLEMODE_MASK       (0x3 << SYSC_MIDLEMODE_SHIFT)
+#define SYSC_TYPE1_CLOCKACTIVITY_SHIFT  8
+#define SYSC_TYPE1_CLOCKACTIVITY_MASK   (0x3 << SYSC_CLOCKACTIVITY_SHIFT)
+#define SYSC_TYPE1_SIDLEMODE_SHIFT      3
+#define SYSC_TYPE1_SIDLEMODE_MASK       (0x3 << SYSC_SIDLEMODE_SHIFT)
+#define SYSC_TYPE1_ENAWAKEUP_SHIFT      2
+#define SYSC_TYPE1_ENAWAKEUP_MASK       (1 << SYSC_ENAWAKEUP_SHIFT)
+#define SYSC_TYPE1_SOFTRESET_SHIFT      1
+#define SYSC_TYPE1_SOFTRESET_MASK       (1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_TYPE1_AUTOIDLE_SHIFT       0
+#define SYSC_TYPE1_AUTOIDLE_MASK        (1 << SYSC_AUTOIDLE_SHIFT)
+
+/*
+ * OCP SYSCONFIG bit shifts/masks TYPE2. These are for IPs compliant
+ * with the new PRCM protocol defined for new OMAP4 IPs.
+ */
+#define SYSC_TYPE2_SOFTRESET_SHIFT      0
+#define SYSC_TYPE2_SOFTRESET_MASK       (1 << SYSC_TYPE2_SOFTRESET_SHIFT)
+#define SYSC_TYPE2_SIDLEMODE_SHIFT      2
+#define SYSC_TYPE2_SIDLEMODE_MASK       (0x3 << SYSC_TYPE2_SIDLEMODE_SHIFT)
+#define SYSC_TYPE2_MIDLEMODE_SHIFT      4
+#define SYSC_TYPE2_MIDLEMODE_MASK       (0x3 << SYSC_TYPE2_MIDLEMODE_SHIFT)
+
+/* OCP SYSSTATUS bit shifts/masks */
+#define SYSS_RESETDONE_SHIFT            0
+#define SYSS_RESETDONE_MASK             (1 << SYSS_RESETDONE_SHIFT)
+
+/* Master standby/slave idle mode flags */
+#define HWMOD_IDLEMODE_FORCE            (1 << 0)
+#define HWMOD_IDLEMODE_NO               (1 << 1)
+#define HWMOD_IDLEMODE_SMART            (1 << 2)
+#define HWMOD_IDLEMODE_SMART_WKUP       (1 << 3)
+
+/* modulemode control type (SW or HW) */
+#define MODULEMODE_HWCTRL               1
+#define MODULEMODE_SWCTRL               2
+
+
+/**
+ * struct omap_hwmod_mux_info - hwmod specific mux configuration
+ * @pads:              array of omap_device_pad entries
+ * @nr_pads:           number of omap_device_pad entries
+ *
+ * Note that this is currently built during init as needed.
+ */
+struct omap_hwmod_mux_info {
+        int                             nr_pads;
+        struct omap_device_pad          *pads;
+        int                             nr_pads_dynamic;
+        struct omap_device_pad          **pads_dynamic;
+        bool                            enabled;
+};
+
+/**
+ * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
+ * @name: name of the IRQ channel (module local name)
+ * @irq: IRQ channel ID (should be non-negative except -1 = terminator)
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_irq_info {
+        const char      *name;
+        s16             irq;
+};
+
+/**
+ * struct omap_hwmod_dma_info - DMA channels used by the hwmod
+ * @name: name of the DMA channel (module local name)
+ * @dma_req: DMA request ID (should be non-negative except -1 = terminator)
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_dma_info {
+        const char      *name;
+        s16             dma_req;
+};
+
+/**
+ * struct omap_hwmod_rst_info - IPs reset lines use by hwmod
+ * @name: name of the reset line (module local name)
+ * @rst_shift: Offset of the reset bit
+ * @st_shift: Offset of the reset status bit (OMAP2/3 only)
+ *
+ * @name should be something short, e.g., "cpu0" or "rst". It is defined
+ * locally to the hwmod.
+ */
+struct omap_hwmod_rst_info {
+        const char      *name;
+        u8              rst_shift;
+        u8              st_shift;
+};
+
+/**
+ * struct omap_hwmod_opt_clk - optional clocks used by this hwmod
+ * @role: "sys", "32k", "tv", etc -- for use in clk_get()
+ * @clk: opt clock: OMAP clock name
+ * @_clk: pointer to the struct clk (filled in at runtime)
+ *
+ * The module's interface clock and main functional clock should not
+ * be added as optional clocks.
+ */
+struct omap_hwmod_opt_clk {
+        const char      *role;
+        const char      *clk;
+        struct clk      *_clk;
+};
+
+
+/* omap_hwmod_omap2_firewall.flags bits */
+#define OMAP_FIREWALL_L3                (1 << 0)
+#define OMAP_FIREWALL_L4                (1 << 1)
+
+/**
+ * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data
+ * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_*
+ * @l4_fw_region: L4 firewall region ID
+ * @l4_prot_group: L4 protection group ID
+ * @flags: (see omap_hwmod_omap2_firewall.flags macros above)
+ */
+struct omap_hwmod_omap2_firewall {
+        u8 l3_perm_bit;
+        u8 l4_fw_region;
+        u8 l4_prot_group;
+        u8 flags;
+};
+
+
+/*
+ * omap_hwmod_addr_space.flags bits
+ *
+ * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init.
+ * ADDR_TYPE_RT: Address space contains module register target data.
+ */
+#define ADDR_MAP_ON_INIT        (1 << 0)        /* XXX does not belong */
+#define ADDR_TYPE_RT            (1 << 1)
+
+/**
+ * struct omap_hwmod_addr_space - address space handled by the hwmod
+ * @name: name of the address space
+ * @pa_start: starting physical address
+ * @pa_end: ending physical address
+ * @flags: (see omap_hwmod_addr_space.flags macros above)
+ *
+ * Address space doesn't necessarily follow physical interconnect
+ * structure.  GPMC is one example.
+ */
+struct omap_hwmod_addr_space {
+        const char *name;
+        u32 pa_start;
+        u32 pa_end;
+        u8 flags;
+};
+
+
+/*
+ * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this
+ * interface to interact with the hwmod.  Used to add sleep dependencies
+ * when the module is enabled or disabled.
+ */
+#define OCP_USER_MPU                    (1 << 0)
+#define OCP_USER_SDMA                   (1 << 1)
+
+/* omap_hwmod_ocp_if.flags bits */
+#define OCPIF_SWSUP_IDLE                (1 << 0)
+#define OCPIF_CAN_BURST                 (1 << 1)
+
+/**
+ * struct omap_hwmod_ocp_if - OCP interface data
+ * @master: struct omap_hwmod that initiates OCP transactions on this link
+ * @slave: struct omap_hwmod that responds to OCP transactions on this link
+ * @addr: address space associated with this link
+ * @clk: interface clock: OMAP clock name
+ * @_clk: pointer to the interface struct clk (filled in at runtime)
+ * @fw: interface firewall data
+ * @width: OCP data width
+ * @user: initiators using this interface (see OCP_USER_* macros above)
+ * @flags: OCP interface flags (see OCPIF_* macros above)
+ *
+ * It may also be useful to add a tag_cnt field for OCP2.x devices.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod_ocp_if {
+        struct omap_hwmod               *master;
+        struct omap_hwmod               *slave;
+        struct omap_hwmod_addr_space    *addr;
+        const char                      *clk;
+        struct clk                      *_clk;
+        union {
+                struct omap_hwmod_omap2_firewall omap2;
+        }                               fw;
+        u8                              width;
+        u8                              user;
+        u8                              flags;
+};
+
+
+/* Macros for use in struct omap_hwmod_sysconfig */
+
+/* Flags for use in omap_hwmod_sysconfig.idlemodes */
+#define MASTER_STANDBY_SHIFT    4
+#define SLAVE_IDLE_SHIFT        0
+#define SIDLE_FORCE             (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT)
+#define SIDLE_NO                (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART             (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT)
+#define SIDLE_SMART_WKUP        (HWMOD_IDLEMODE_SMART_WKUP << SLAVE_IDLE_SHIFT)
+#define MSTANDBY_FORCE          (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_NO             (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART          (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT)
+#define MSTANDBY_SMART_WKUP     (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT)
+
+/* omap_hwmod_sysconfig.sysc_flags capability flags */
+#define SYSC_HAS_AUTOIDLE       (1 << 0)
+#define SYSC_HAS_SOFTRESET      (1 << 1)
+#define SYSC_HAS_ENAWAKEUP      (1 << 2)
+#define SYSC_HAS_EMUFREE        (1 << 3)
+#define SYSC_HAS_CLOCKACTIVITY  (1 << 4)
+#define SYSC_HAS_SIDLEMODE      (1 << 5)
+#define SYSC_HAS_MIDLEMODE      (1 << 6)
+#define SYSS_HAS_RESET_STATUS   (1 << 7)
+#define SYSC_NO_CACHE           (1 << 8)  /* XXX SW flag, belongs elsewhere */
+#define SYSC_HAS_RESET_STATUS   (1 << 9)
+
+/* omap_hwmod_sysconfig.clockact flags */
+#define CLOCKACT_TEST_BOTH      0x0
+#define CLOCKACT_TEST_MAIN      0x1
+#define CLOCKACT_TEST_ICLK      0x2
+#define CLOCKACT_TEST_NONE      0x3
+
+/**
+ * struct omap_hwmod_sysc_fields - hwmod OCP_SYSCONFIG register field offsets.
+ * @midle_shift: Offset of the midle bit
+ * @clkact_shift: Offset of the clockactivity bit
+ * @sidle_shift: Offset of the sidle bit
+ * @enwkup_shift: Offset of the enawakeup bit
+ * @srst_shift: Offset of the softreset bit
+ * @autoidle_shift: Offset of the autoidle bit
+ */
+struct omap_hwmod_sysc_fields {
+        u8 midle_shift;
+        u8 clkact_shift;
+        u8 sidle_shift;
+        u8 enwkup_shift;
+        u8 srst_shift;
+        u8 autoidle_shift;
+};
+
+/**
+ * struct omap_hwmod_class_sysconfig - hwmod class OCP_SYS* data
+ * @rev_offs: IP block revision register offset (from module base addr)
+ * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
+ * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
+ * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
+ * @clockact: the default value of the module CLOCKACTIVITY bits
+ *
+ * @clockact describes to the module which clocks are likely to be
+ * disabled when the PRCM issues its idle request to the module.  Some
+ * modules have separate clockdomains for the interface clock and main
+ * functional clock, and can check whether they should acknowledge the
+ * idle request based on the internal module functionality that has
+ * been associated with the clocks marked in @clockact.  This field is
+ * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below)
+ *
+ * @sysc_fields: structure containing the offset positions of various bits in
+ * SYSCONFIG register. This can be populated using omap_hwmod_sysc_type1 or
+ * omap_hwmod_sysc_type2 defined in omap_hwmod_common_data.c depending on
+ * whether the device ip is compliant with the original PRCM protocol
+ * defined for OMAP2420 or the new PRCM protocol for new OMAP4 IPs.
+ * If the device follows a different scheme for the sysconfig register ,
+ * then this field has to be populated with the correct offset structure.
+ */
+struct omap_hwmod_class_sysconfig {
+        u16 rev_offs;
+        u16 sysc_offs;
+        u16 syss_offs;
+        u16 sysc_flags;
+        u8 idlemodes;
+        u8 clockact;
+        struct omap_hwmod_sysc_fields *sysc_fields;
+};
+
+/**
+ * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data
+ * @module_offs: PRCM submodule offset from the start of the PRM/CM
+ * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3)
+ * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs
+ * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3)
+ * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit
+ * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit
+ *
+ * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST,
+ * WKEN, GRPSEL registers.  In an ideal world, no extra information
+ * would be needed for IDLEST information, but alas, there are some
+ * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit
+ * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST)
+ */
+struct omap_hwmod_omap2_prcm {
+        s16 module_offs;
+        u8 prcm_reg_id;
+        u8 module_bit;
+        u8 idlest_reg_id;
+        u8 idlest_idle_bit;
+        u8 idlest_stdby_bit;
+};
+
+
+/**
+ * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
+ * @clkctrl_reg: PRCM address of the clock control register
+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
+ * @submodule_wkdep_bit: bit shift of the WKDEP range
+ */
+struct omap_hwmod_omap4_prcm {
+        u16             clkctrl_offs;
+        u16             rstctrl_offs;
+        u16             context_offs;
+        u8              submodule_wkdep_bit;
+        u8              modulemode;
+};
+
+
+/*
+ * omap_hwmod.flags definitions
+ *
+ * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out
+ *     of idle, rather than relying on module smart-idle
+ * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out
+ *     of standby, rather than relying on module smart-standby
+ * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for
+ *     SDRAM controller, etc. XXX probably belongs outside the main hwmod file
+ *     XXX Should be HWMOD_SETUP_NO_RESET
+ * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
+ *     controller, etc. XXX probably belongs outside the main hwmod file
+ *     XXX Should be HWMOD_SETUP_NO_IDLE
+ * HWMOD_NO_OCP_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ *     when module is enabled, rather than the default, which is to
+ *     enable autoidle
+ * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
+ * HWMOD_NO_IDLEST: this module does not have idle status - this is the case
+ *     only for few initiator modules on OMAP2 & 3.
+ * HWMOD_CONTROL_OPT_CLKS_IN_RESET: Enable all optional clocks during reset.
+ *     This is needed for devices like DSS that require optional clocks enabled
+ *     in order to complete the reset. Optional clocks will be disabled
+ *     again after the reset.
+ * HWMOD_16BIT_REG: Module has 16bit registers
+ */
+#define HWMOD_SWSUP_SIDLE                       (1 << 0)
+#define HWMOD_SWSUP_MSTANDBY                    (1 << 1)
+#define HWMOD_INIT_NO_RESET                     (1 << 2)
+#define HWMOD_INIT_NO_IDLE                      (1 << 3)
+#define HWMOD_NO_OCP_AUTOIDLE                   (1 << 4)
+#define HWMOD_SET_DEFAULT_CLOCKACT              (1 << 5)
+#define HWMOD_NO_IDLEST                         (1 << 6)
+#define HWMOD_CONTROL_OPT_CLKS_IN_RESET         (1 << 7)
+#define HWMOD_16BIT_REG                         (1 << 8)
+
+/*
+ * omap_hwmod._int_flags definitions
+ * These are for internal use only and are managed by the omap_hwmod code.
+ *
+ * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module
+ * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP
+ * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached
+ */
+#define _HWMOD_NO_MPU_PORT                      (1 << 0)
+#define _HWMOD_WAKEUP_ENABLED                   (1 << 1)
+#define _HWMOD_SYSCONFIG_LOADED                 (1 << 2)
+
+/*
+ * omap_hwmod._state definitions
+ *
+ * INITIALIZED: reset (optionally), initialized, enabled, disabled
+ *              (optionally)
+ *
+ *
+ */
+#define _HWMOD_STATE_UNKNOWN                    0
+#define _HWMOD_STATE_REGISTERED                 1
+#define _HWMOD_STATE_CLKS_INITED                2
+#define _HWMOD_STATE_INITIALIZED                3
+#define _HWMOD_STATE_ENABLED                    4
+#define _HWMOD_STATE_IDLE                       5
+#define _HWMOD_STATE_DISABLED                   6
+
+/**
+ * struct omap_hwmod_class - the type of an IP block
+ * @name: name of the hwmod_class
+ * @sysc: device SYSCONFIG/SYSSTATUS register data
+ * @rev: revision of the IP class
+ * @pre_shutdown: ptr to fn to be executed immediately prior to device shutdown
+ * @reset: ptr to fn to be executed in place of the standard hwmod reset fn
+ *
+ * Represent the class of a OMAP hardware "modules" (e.g. timer,
+ * smartreflex, gpio, uart...)
+ *
+ * @pre_shutdown is a function that will be run immediately before
+ * hwmod clocks are disabled, etc.  It is intended for use for hwmods
+ * like the MPU watchdog, which cannot be disabled with the standard
+ * omap_hwmod_shutdown().  The function should return 0 upon success,
+ * or some negative error upon failure.  Returning an error will cause
+ * omap_hwmod_shutdown() to abort the device shutdown and return an
+ * error.
+ *
+ * If @reset is defined, then the function it points to will be
+ * executed in place of the standard hwmod _reset() code in
+ * mach-omap2/omap_hwmod.c.  This is needed for IP blocks which have
+ * unusual reset sequences - usually processor IP blocks like the IVA.
+ */
+struct omap_hwmod_class {
+        const char                              *name;
+        struct omap_hwmod_class_sysconfig       *sysc;
+        u32                                     rev;
+        int                                     (*pre_shutdown)(struct omap_hwmod *oh);
+        int                                     (*reset)(struct omap_hwmod *oh);
+};
+
+/**
+ * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks)
+ * @name: name of the hwmod
+ * @class: struct omap_hwmod_class * to the class of this hwmod
+ * @od: struct omap_device currently associated with this hwmod (internal use)
+ * @mpu_irqs: ptr to an array of MPU IRQs
+ * @sdma_reqs: ptr to an array of System DMA request IDs
+ * @prcm: PRCM data pertaining to this hwmod
+ * @main_clk: main clock: OMAP clock name
+ * @_clk: pointer to the main struct clk (filled in at runtime)
+ * @opt_clks: other device clocks that drivers can request (0..*)
+ * @vdd_name: voltage domain name
+ * @voltdm: pointer to voltage domain (filled in at runtime)
+ * @masters: ptr to array of OCP ifs that this hwmod can initiate on
+ * @slaves: ptr to array of OCP ifs that this hwmod can respond on
+ * @dev_attr: arbitrary device attributes that can be passed to the driver
+ * @_sysc_cache: internal-use hwmod flags
+ * @_mpu_rt_va: cached register target start address (internal use)
+ * @_mpu_port_index: cached MPU register target slave ID (internal use)
+ * @opt_clks_cnt: number of @opt_clks
+ * @master_cnt: number of @master entries
+ * @slaves_cnt: number of @slave entries
+ * @response_lat: device OCP response latency (in interface clock cycles)
+ * @_int_flags: internal-use hwmod flags
+ * @_state: internal-use hwmod state
+ * @_postsetup_state: internal-use state to leave the hwmod in after _setup()
+ * @flags: hwmod flags (documented below)
+ * @omap_chip: OMAP chips this hwmod is present on
+ * @_lock: spinlock serializing operations on this hwmod
+ * @node: list node for hwmod list (internal use)
+ *
+ * @main_clk refers to this module's "main clock," which for our
+ * purposes is defined as "the functional clock needed for register
+ * accesses to complete."  Modules may not have a main clock if the
+ * interface clock also serves as a main clock.
+ *
+ * Parameter names beginning with an underscore are managed internally by
+ * the omap_hwmod code and should not be set during initialization.
+ */
+struct omap_hwmod {
+        const char                      *name;
+        struct omap_hwmod_class         *class;
+        struct omap_device              *od;
+        struct omap_hwmod_mux_info      *mux;
+        struct omap_hwmod_irq_info      *mpu_irqs;
+        struct omap_hwmod_dma_info      *sdma_reqs;
+        struct omap_hwmod_rst_info      *rst_lines;
+        union {
+                struct omap_hwmod_omap2_prcm omap2;
+                struct omap_hwmod_omap4_prcm omap4;
+        }                               prcm;
+        const char                      *main_clk;
+        struct clk                      *_clk;
+        struct omap_hwmod_opt_clk       *opt_clks;
+        char                            *clkdm_name;
+        struct clockdomain              *clkdm;
+        char                            *vdd_name;
+        struct voltagedomain            *voltdm;
+        struct omap_hwmod_ocp_if        **masters; /* connect to *_IA */
+        struct omap_hwmod_ocp_if        **slaves;  /* connect to *_TA */
+        void                            *dev_attr;
+        u32                             _sysc_cache;
+        void __iomem                    *_mpu_rt_va;
+        spinlock_t                      _lock;
+        struct list_head                node;
+        u16                             flags;
+        u8                              _mpu_port_index;
+        u8                              response_lat;
+        u8                              rst_lines_cnt;
+        u8                              opt_clks_cnt;
+        u8                              masters_cnt;
+        u8                              slaves_cnt;
+        u8                              hwmods_cnt;
+        u8                              _int_flags;
+        u8                              _state;
+        u8                              _postsetup_state;
+        const struct omap_chip_id       omap_chip;
+};
+
+int omap_hwmod_register(struct omap_hwmod **ohs);
+struct omap_hwmod *omap_hwmod_lookup(const char *name);
+int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
+                        void *data);
+
+int __init omap_hwmod_setup_one(const char *name);
+
+int omap_hwmod_enable(struct omap_hwmod *oh);
+int _omap_hwmod_enable(struct omap_hwmod *oh);
+int omap_hwmod_idle(struct omap_hwmod *oh);
+int _omap_hwmod_idle(struct omap_hwmod *oh);
+int omap_hwmod_shutdown(struct omap_hwmod *oh);
+
+int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name);
+int omap_hwmod_read_hardreset(struct omap_hwmod *oh, const char *name);
+
+int omap_hwmod_enable_clocks(struct omap_hwmod *oh);
+int omap_hwmod_disable_clocks(struct omap_hwmod *oh);
+
+int omap_hwmod_set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode);
+int omap_hwmod_set_ocp_autoidle(struct omap_hwmod *oh, u8 autoidle);
+
+int omap_hwmod_reset(struct omap_hwmod *oh);
+void omap_hwmod_ocp_barrier(struct omap_hwmod *oh);
+
+void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs);
+u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs);
+int omap_hwmod_softreset(struct omap_hwmod *oh);
+
+int omap_hwmod_count_resources(struct omap_hwmod *oh);
+int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res);
+
+struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh);
+void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh);
+
+int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh,
+                                 struct omap_hwmod *init_oh);
+int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
+                                 struct omap_hwmod *init_oh);
+
+int omap_hwmod_set_clockact_both(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_main(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh);
+int omap_hwmod_set_clockact_none(struct omap_hwmod *oh);
+
+int omap_hwmod_enable_wakeup(struct omap_hwmod *oh);
+int omap_hwmod_disable_wakeup(struct omap_hwmod *oh);
+
+int omap_hwmod_for_each_by_class(const char *classname,
+                                 int (*fn)(struct omap_hwmod *oh,
+                                           void *user),
+                                 void *user);
+
+int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state);
+u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh);
+
+int omap_hwmod_no_setup_reset(struct omap_hwmod *oh);
+
+/*
+ * Chip variant-specific hwmod init routines - XXX should be converted
+ * to use initcalls once the initial boot ordering is straightened out
+ */
+extern int omap2420_hwmod_init(void);
+extern int omap2430_hwmod_init(void);
+extern int omap3xxx_hwmod_init(void);
+extern int omap44xx_hwmod_init(void);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
new file mode 100644
index 00000000000..2858667d2e4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/onenand.h
@@ -0,0 +1,53 @@
+/*
+ * arch/arm/plat-omap/include/mach/onenand.h
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Author: Juha Yrjola
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#define ONENAND_SYNC_READ       (1 << 0)
+#define ONENAND_SYNC_READWRITE  (1 << 1)
+
+struct onenand_freq_info {
+        u16                     maf_id;
+        u16                     dev_id;
+        u16                     ver_id;
+};
+
+struct omap_onenand_platform_data {
+        int                     cs;
+        int                     gpio_irq;
+        struct mtd_partition    *parts;
+        int                     nr_parts;
+        int                     (*onenand_setup)(void __iomem *, int *freq_ptr);
+        int             (*get_freq)(const struct onenand_freq_info *freq_info,
+                                    bool *clk_dep);
+        int                     dma_channel;
+        u8                      flags;
+        u8                      regulator_can_sleep;
+        u8                      skip_initial_unlocking;
+};
+
+#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+        defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data      NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/param.h b/arch/arm/plat-omap/include/plat/param.h
new file mode 100644
index 00000000000..1eb4dc32697
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/param.h
@@ -0,0 +1,8 @@
+/*
+ *  arch/arm/plat-omap/include/mach/param.h
+ *
+ */
+
+#ifdef CONFIG_OMAP_32K_TIMER_HZ
+#define HZ      CONFIG_OMAP_32K_TIMER_HZ
+#endif
diff --git a/arch/arm/plat-omap/include/plat/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
new file mode 100644
index 00000000000..267f43bb2a4
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/plat-omap/include/mach/prcm.h
+ *
+ * Access definations for use in OMAP24XX clock and power management
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * XXX This file is deprecated.  The PRCM is an OMAP2+-only subsystem,
+ * so this file doesn't belong in plat-omap/include/plat.  Please
+ * do not add anything new to this file.
+ */
+
+#ifndef __ASM_ARM_ARCH_OMAP_PRCM_H
+#define __ASM_ARM_ARCH_OMAP_PRCM_H
+
+u32 omap_prcm_get_reset_sources(void);
+int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, u8 idlest,
+                         const char *name);
+
+#endif
+
+
+
diff --git a/arch/arm/plat-omap/include/plat/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
new file mode 100644
index 00000000000..925b12b500d
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -0,0 +1,165 @@
+#ifndef ____ASM_ARCH_SDRC_H
+#define ____ASM_ARCH_SDRC_H
+
+/*
+ * OMAP2/3 SDRC/SMS register definitions
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2008 Nokia Corporation
+ *
+ * Tony Lindgren
+ * Paul Walmsley
+ * Richard Woodruff
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <mach/io.h>
+
+/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */
+
+#define SDRC_SYSCONFIG          0x010
+#define SDRC_CS_CFG             0x040
+#define SDRC_SHARING            0x044
+#define SDRC_ERR_TYPE           0x04C
+#define SDRC_DLLA_CTRL          0x060
+#define SDRC_DLLA_STATUS        0x064
+#define SDRC_DLLB_CTRL          0x068
+#define SDRC_DLLB_STATUS        0x06C
+#define SDRC_POWER              0x070
+#define SDRC_MCFG_0             0x080
+#define SDRC_MR_0               0x084
+#define SDRC_EMR2_0             0x08c
+#define SDRC_ACTIM_CTRL_A_0     0x09c
+#define SDRC_ACTIM_CTRL_B_0     0x0a0
+#define SDRC_RFR_CTRL_0         0x0a4
+#define SDRC_MANUAL_0           0x0a8
+#define SDRC_MCFG_1             0x0B0
+#define SDRC_MR_1               0x0B4
+#define SDRC_EMR2_1             0x0BC
+#define SDRC_ACTIM_CTRL_A_1     0x0C4
+#define SDRC_ACTIM_CTRL_B_1     0x0C8
+#define SDRC_RFR_CTRL_1         0x0D4
+#define SDRC_MANUAL_1           0x0D8
+
+#define SDRC_POWER_AUTOCOUNT_SHIFT      8
+#define SDRC_POWER_AUTOCOUNT_MASK       (0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT        4
+#define SDRC_POWER_CLKCTRL_MASK         (0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT  (0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
+/*
+ * These values represent the number of memory clock cycles between
+ * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
+ * rows per device, and include a subtraction of a 50 cycle window in the
+ * event that the autorefresh command is delayed due to other SDRC activity.
+ * The '| 1' sets the ARE field to send one autorefresh when the autorefresh
+ * counter reaches 0.
+ *
+ * These represent optimal values for common parts, it won't work for all.
+ * As long as you scale down, most parameters are still work, they just
+ * become sub-optimal. The RFR value goes in the opposite direction. If you
+ * don't adjust it down as your clock period increases the refresh interval
+ * will not be met. Setting all parameters for complete worst case may work,
+ * but may cut memory performance by 2x. Due to errata the DLLs need to be
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists acorss production samples.
+ *
+ * Only the FULL speed values are given. Current code is such that rate
+ * changes must be made at DPLLoutx2. The actual value adjustment for low
+ * frequency operation will be handled by omap_set_performance()
+ *
+ * By having the boot loader boot up in the fastest L4 speed available likely
+ * will result in something which you can switch between.
+ */
+#define SDRC_RFR_CTRL_165MHz    (0x00044c00 | 1)
+#define SDRC_RFR_CTRL_133MHz    (0x0003de00 | 1)
+#define SDRC_RFR_CTRL_100MHz    (0x0002da01 | 1)
+#define SDRC_RFR_CTRL_110MHz    (0x0002da01 | 1) /* Need to calc */
+#define SDRC_RFR_CTRL_BYPASS    (0x00005000 | 1) /* Need to calc */
+
+
+/*
+ * SMS register access
+ */
+
+#define OMAP242X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+#define OMAP243X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+#define OMAP343X_SMS_REGADDR(reg)                                       \
+                (void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+
+/* SMS register offsets - read/write with sms_{read,write}_reg() */
+
+#define SMS_SYSCONFIG                   0x010
+#define SMS_ROT_CONTROL(context)        (0x180 + 0x10 * context)
+#define SMS_ROT_SIZE(context)           (0x184 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context)    (0x188 + 0x10 * context)
+/* REVISIT: fill in other SMS registers here */
+
+
+#ifndef __ASSEMBLER__
+
+/**
+ * struct omap_sdrc_params - SDRC parameters for a given SDRC clock rate
+ * @rate: SDRC clock rate (in Hz)
+ * @actim_ctrla: Value to program to SDRC_ACTIM_CTRLA for this rate
+ * @actim_ctrlb: Value to program to SDRC_ACTIM_CTRLB for this rate
+ * @rfr_ctrl: Value to program to SDRC_RFR_CTRL for this rate
+ * @mr: Value to program to SDRC_MR for this rate
+ *
+ * This structure holds a pre-computed set of register values for the
+ * SDRC for a given SDRC clock rate and SDRAM chip.  These are
+ * intended to be pre-computed and specified in an array in the board-*.c
+ * files.  The structure is keyed off the 'rate' field.
+ */
+struct omap_sdrc_params {
+        unsigned long rate;
+        u32 actim_ctrla;
+        u32 actim_ctrlb;
+        u32 rfr_ctrl;
+        u32 mr;
+};
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+void omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+                            struct omap_sdrc_params *sdrc_cs1);
+#else
+static inline void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
+                                          struct omap_sdrc_params *sdrc_cs1) {};
+#endif
+
+int omap2_sdrc_get_params(unsigned long r,
+                          struct omap_sdrc_params **sdrc_cs0,
+                          struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx);
+void omap2_sms_write_rot_size(u32 val, unsigned ctx);
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
+
+#ifdef CONFIG_ARCH_OMAP2
+
+struct memory_timings {
+        u32 m_type;             /* ddr = 1, sdr = 0 */
+        u32 dll_mode;           /* use lock mode = 1, unlock mode = 0 */
+        u32 slow_dll_ctrl;      /* unlock mode, dll value for slow speed */
+        u32 fast_dll_ctrl;      /* unlock mode, dll value for fast speed */
+        u32 base_cs;            /* base chip select to use for calculations */
+};
+
+extern void omap2xxx_sdrc_init_params(u32 force_lock_to_unlock_mode);
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
+
+u32 omap2xxx_sdrc_dll_is_unlocked(void);
+u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
+
+#endif  /* CONFIG_ARCH_OMAP2 */
+
+#endif  /* __ASSEMBLER__ */
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
new file mode 100644
index 00000000000..de3b10c1812
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -0,0 +1,120 @@
+/*
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_SERIAL_H
+#define __ASM_ARCH_SERIAL_H
+
+#include <linux/init.h>
+
+/*
+ * Memory entry used for the DEBUG_LL UART configuration. See also
+ * uncompress.h and debug-macro.S.
+ *
+ * Note that using a memory location for storing the UART configuration
+ * has at least two limitations:
+ *
+ * 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
+ *    uncompress code could then partially overwrite itself
+ * 2. We assume printascii is called at least once before paging_init,
+ *    and addruart has a chance to read OMAP_UART_INFO
+ */
+#define OMAP_UART_INFO          (PLAT_PHYS_OFFSET + 0x3ffc)
+
+/* OMAP1 serial ports */
+#define OMAP1_UART1_BASE        0xfffb0000
+#define OMAP1_UART2_BASE        0xfffb0800
+#define OMAP1_UART3_BASE        0xfffb9800
+
+/* OMAP2 serial ports */
+#define OMAP2_UART1_BASE        0x4806a000
+#define OMAP2_UART2_BASE        0x4806c000
+#define OMAP2_UART3_BASE        0x4806e000
+
+/* OMAP3 serial ports */
+#define OMAP3_UART1_BASE        OMAP2_UART1_BASE
+#define OMAP3_UART2_BASE        OMAP2_UART2_BASE
+#define OMAP3_UART3_BASE        0x49020000
+#define OMAP3_UART4_BASE        0x49042000      /* Only on 36xx */
+
+/* OMAP4 serial ports */
+#define OMAP4_UART1_BASE        OMAP2_UART1_BASE
+#define OMAP4_UART2_BASE        OMAP2_UART2_BASE
+#define OMAP4_UART3_BASE        0x48020000
+#define OMAP4_UART4_BASE        0x4806e000
+
+/* TI816X serial ports */
+#define TI816X_UART1_BASE       0x48020000
+#define TI816X_UART2_BASE       0x48022000
+#define TI816X_UART3_BASE       0x48024000
+
+/* AM3505/3517 UART4 */
+#define AM35XX_UART4_BASE       0x4809E000      /* Only on AM3505/3517 */
+
+/* External port on Zoom2/3 */
+#define ZOOM_UART_BASE          0x10000000
+#define ZOOM_UART_VIRT          0xfa400000
+
+#define OMAP_PORT_SHIFT         2
+#define OMAP7XX_PORT_SHIFT      0
+#define ZOOM_PORT_SHIFT         1
+
+#define OMAP1510_BASE_BAUD      (12000000/16)
+#define OMAP16XX_BASE_BAUD      (48000000/16)
+#define OMAP24XX_BASE_BAUD      (48000000/16)
+
+/*
+ * DEBUG_LL port encoding stored into the UART1 scratchpad register by
+ * decomp_setup in uncompress.h
+ */
+#define OMAP1UART1              11
+#define OMAP1UART2              12
+#define OMAP1UART3              13
+#define OMAP2UART1              21
+#define OMAP2UART2              22
+#define OMAP2UART3              23
+#define OMAP3UART1              OMAP2UART1
+#define OMAP3UART2              OMAP2UART2
+#define OMAP3UART3              33
+#define OMAP3UART4              34              /* Only on 36xx */
+#define OMAP4UART1              OMAP2UART1
+#define OMAP4UART2              OMAP2UART2
+#define OMAP4UART3              43
+#define OMAP4UART4              44
+#define TI816XUART1             81
+#define TI816XUART2             82
+#define TI816XUART3             83
+#define ZOOM_UART               95              /* Only on zoom2/3 */
+
+/* This is only used by 8250.c for omap1510 */
+#define is_omap_port(pt)        ({int __ret = 0;                        \
+                        if ((pt)->port.mapbase == OMAP1_UART1_BASE ||   \
+                            (pt)->port.mapbase == OMAP1_UART2_BASE ||   \
+                            (pt)->port.mapbase == OMAP1_UART3_BASE)     \
+                                __ret = 1;                              \
+                        __ret;                                          \
+                        })
+
+#ifndef __ASSEMBLER__
+
+struct omap_board_data;
+
+extern void omap_serial_init(void);
+extern void omap_serial_init_port(struct omap_board_data *bdata);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/system.h b/arch/arm/plat-omap/include/plat/system.h
new file mode 100644
index 00000000000..c5fa9e92900
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -0,0 +1,17 @@
+/*
+ * Copied from arch/arm/mach-sa1100/include/mach/system.h
+ * Copyright (c) 1999 Nicolas Pitre <nico@fluxnic.net>
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/proc-fns.h>
+
+static inline void arch_idle(void)
+{
+        cpu_do_idle();
+}
+
+extern void (*arch_reset)(char, const char *);
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/tc.h b/arch/arm/plat-omap/include/plat/tc.h
new file mode 100644
index 00000000000..d2fcd789bb9
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/tc.h
@@ -0,0 +1,106 @@
+/*
+ * arch/arm/plat-omap/include/mach/tc.h
+ *
+ * OMAP Traffic Controller
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __ASM_ARCH_TC_H
+#define __ASM_ARCH_TC_H
+
+#define TCMIF_BASE              0xfffecc00
+#define OMAP_TC_OCPT1_PRIOR     (TCMIF_BASE + 0x00)
+#define OMAP_TC_EMIFS_PRIOR     (TCMIF_BASE + 0x04)
+#define OMAP_TC_EMIFF_PRIOR     (TCMIF_BASE + 0x08)
+#define EMIFS_CONFIG            (TCMIF_BASE + 0x0c)
+#define EMIFS_CS0_CONFIG        (TCMIF_BASE + 0x10)
+#define EMIFS_CS1_CONFIG        (TCMIF_BASE + 0x14)
+#define EMIFS_CS2_CONFIG        (TCMIF_BASE + 0x18)
+#define EMIFS_CS3_CONFIG        (TCMIF_BASE + 0x1c)
+#define EMIFF_SDRAM_CONFIG      (TCMIF_BASE + 0x20)
+#define EMIFF_MRS               (TCMIF_BASE + 0x24)
+#define TC_TIMEOUT1             (TCMIF_BASE + 0x28)
+#define TC_TIMEOUT2             (TCMIF_BASE + 0x2c)
+#define TC_TIMEOUT3             (TCMIF_BASE + 0x30)
+#define TC_ENDIANISM            (TCMIF_BASE + 0x34)
+#define EMIFF_SDRAM_CONFIG_2    (TCMIF_BASE + 0x3c)
+#define EMIF_CFG_DYNAMIC_WS     (TCMIF_BASE + 0x40)
+#define EMIFS_ACS0              (TCMIF_BASE + 0x50)
+#define EMIFS_ACS1              (TCMIF_BASE + 0x54)
+#define EMIFS_ACS2              (TCMIF_BASE + 0x58)
+#define EMIFS_ACS3              (TCMIF_BASE + 0x5c)
+#define OMAP_TC_OCPT2_PRIOR     (TCMIF_BASE + 0xd0)
+
+/* external EMIFS chipselect regions */
+#define OMAP_CS0_PHYS           0x00000000
+#define OMAP_CS0_SIZE           SZ_64M
+
+#define OMAP_CS1_PHYS           0x04000000
+#define OMAP_CS1_SIZE           SZ_64M
+
+#define OMAP_CS1A_PHYS          OMAP_CS1_PHYS
+#define OMAP_CS1A_SIZE          SZ_32M
+
+#define OMAP_CS1B_PHYS          (OMAP_CS1A_PHYS + OMAP_CS1A_SIZE)
+#define OMAP_CS1B_SIZE          SZ_32M
+
+#define OMAP_CS2_PHYS           0x08000000
+#define OMAP_CS2_SIZE           SZ_64M
+
+#define OMAP_CS2A_PHYS          OMAP_CS2_PHYS
+#define OMAP_CS2A_SIZE          SZ_32M
+
+#define OMAP_CS2B_PHYS          (OMAP_CS2A_PHYS + OMAP_CS2A_SIZE)
+#define OMAP_CS2B_SIZE          SZ_32M
+
+#define OMAP_CS3_PHYS           0x0c000000
+#define OMAP_CS3_SIZE           SZ_64M
+
+#ifndef __ASSEMBLER__
+
+/* EMIF Slow Interface Configuration Register */
+#define OMAP_EMIFS_CONFIG_FR            (1 << 4)
+#define OMAP_EMIFS_CONFIG_PDE           (1 << 3)
+#define OMAP_EMIFS_CONFIG_PWD_EN        (1 << 2)
+#define OMAP_EMIFS_CONFIG_BM            (1 << 1)
+#define OMAP_EMIFS_CONFIG_WP            (1 << 0)
+
+#define EMIFS_CCS(n)            (EMIFS_CS0_CONFIG + (4 * (n)))
+#define EMIFS_ACS(n)            (EMIFS_ACS0 + (4 * (n)))
+
+/* Almost all documentation for chip and board memory maps assumes
+ * BM is clear.  Most devel boards have a switch to control booting
+ * from NOR flash (using external chipselect 3) rather than mask ROM,
+ * which uses BM to interchange the physical CS0 and CS3 addresses.
+ */
+static inline u32 omap_cs0_phys(void)
+{
+        return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+                        ?  OMAP_CS3_PHYS : 0;
+}
+
+static inline u32 omap_cs3_phys(void)
+{
+        return (omap_readl(EMIFS_CONFIG) & OMAP_EMIFS_CONFIG_BM)
+                        ? 0 : OMAP_CS3_PHYS;
+}
+
+#endif  /* __ASSEMBLER__ */
+
+#endif  /* __ASM_ARCH_TC_H */
diff --git a/arch/arm/plat-omap/include/plat/ti816x.h b/arch/arm/plat-omap/include/plat/ti816x.h
new file mode 100644
index 00000000000..50510f5dda1
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/ti816x.h
@@ -0,0 +1,27 @@
+/*
+ * This file contains the address data for various TI816X modules.
+ *
+ * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_TI816X_H
+#define __ASM_ARCH_TI816X_H
+
+#define L4_SLOW_TI816X_BASE     0x48000000
+
+#define TI816X_SCM_BASE         0x48140000
+#define TI816X_CTRL_BASE        TI816X_SCM_BASE
+#define TI816X_PRCM_BASE        0x48180000
+
+#define TI816X_ARM_INTC_BASE    0x48200000
+
+#endif /* __ASM_ARCH_TI816X_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
new file mode 100644
index 00000000000..a067484cc4a
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -0,0 +1,184 @@
+/*
+ * arch/arm/plat-omap/include/mach/uncompress.h
+ *
+ * Serial port stubs for kernel decompress status messages
+ *
+ * Initially based on:
+ * linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: Greg Lonnon <glonnon@ridgerun.com>
+ *
+ * Rewritten by:
+ * Author: <source@mvista.com>
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/serial_reg.h>
+
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+
+#include <plat/serial.h>
+
+#define MDR1_MODE_MASK                  0x07
+
+volatile u8 *uart_base;
+int uart_shift;
+
+/*
+ * Store the DEBUG_LL uart number into memory.
+ * See also debug-macro.S, and serial.c for related code.
+ */
+static void set_omap_uart_info(unsigned char port)
+{
+        *(volatile u32 *)OMAP_UART_INFO = port;
+}
+
+static void putc(int c)
+{
+        if (!uart_base)
+                return;
+
+        /* Check for UART 16x mode */
+        if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
+                return;
+
+        while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
+                barrier();
+        uart_base[UART_TX << uart_shift] = c;
+}
+
+static inline void flush(void)
+{
+}
+
+/*
+ * Macros to configure UART1 and debug UART
+ */
+#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id)               \
+        if (machine_is_##mach()) {                                      \
+                uart_base = (volatile u8 *)(dbg_uart);                  \
+                uart_shift = (dbg_shft);                                \
+                port = (dbg_id);                                        \
+                set_omap_uart_info(port);                               \
+                break;                                                  \
+        }
+
+#define DEBUG_LL_OMAP7XX(p, mach)                                       \
+        _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
+                OMAP1UART##p)
+
+#define DEBUG_LL_OMAP1(p, mach)                                         \
+        _DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT,    \
+                OMAP1UART##p)
+
+#define DEBUG_LL_OMAP2(p, mach)                                         \
+        _DEBUG_LL_ENTRY(mach, OMAP2_UART##p##_BASE, OMAP_PORT_SHIFT,    \
+                OMAP2UART##p)
+
+#define DEBUG_LL_OMAP3(p, mach)                                         \
+        _DEBUG_LL_ENTRY(mach, OMAP3_UART##p##_BASE, OMAP_PORT_SHIFT,    \
+                OMAP3UART##p)
+
+#define DEBUG_LL_OMAP4(p, mach)                                         \
+        _DEBUG_LL_ENTRY(mach, OMAP4_UART##p##_BASE, OMAP_PORT_SHIFT,    \
+                OMAP4UART##p)
+
+/* Zoom2/3 shift is different for UART1 and external port */
+#define DEBUG_LL_ZOOM(mach)                                             \
+        _DEBUG_LL_ENTRY(mach, ZOOM_UART_BASE, ZOOM_PORT_SHIFT, ZOOM_UART)
+
+#define DEBUG_LL_TI816X(p, mach)                                        \
+        _DEBUG_LL_ENTRY(mach, TI816X_UART##p##_BASE, OMAP_PORT_SHIFT,   \
+                TI816XUART##p)
+
+static inline void __arch_decomp_setup(unsigned long arch_id)
+{
+        int port = 0;
+
+        /*
+         * Initialize the port based on the machine ID from the bootloader.
+         * Note that we're using macros here instead of switch statement
+         * as machine_is functions are optimized out for the boards that
+         * are not selected.
+         */
+        do {
+                /* omap7xx/8xx based boards using UART1 with shift 0 */
+                DEBUG_LL_OMAP7XX(1, herald);
+                DEBUG_LL_OMAP7XX(1, omap_perseus2);
+
+                /* omap15xx/16xx based boards using UART1 */
+                DEBUG_LL_OMAP1(1, ams_delta);
+                DEBUG_LL_OMAP1(1, nokia770);
+                DEBUG_LL_OMAP1(1, omap_h2);
+                DEBUG_LL_OMAP1(1, omap_h3);
+                DEBUG_LL_OMAP1(1, omap_innovator);
+                DEBUG_LL_OMAP1(1, omap_osk);
+                DEBUG_LL_OMAP1(1, omap_palmte);
+                DEBUG_LL_OMAP1(1, omap_palmz71);
+
+                /* omap15xx/16xx based boards using UART2 */
+                DEBUG_LL_OMAP1(2, omap_palmtt);
+
+                /* omap15xx/16xx based boards using UART3 */
+                DEBUG_LL_OMAP1(3, sx1);
+
+                /* omap2 based boards using UART1 */
+                DEBUG_LL_OMAP2(1, omap_2430sdp);
+                DEBUG_LL_OMAP2(1, omap_apollon);
+                DEBUG_LL_OMAP2(1, omap_h4);
+
+                /* omap2 based boards using UART3 */
+                DEBUG_LL_OMAP2(3, nokia_n800);
+                DEBUG_LL_OMAP2(3, nokia_n810);
+                DEBUG_LL_OMAP2(3, nokia_n810_wimax);
+
+                /* omap3 based boards using UART1 */
+                DEBUG_LL_OMAP2(1, omap3evm);
+                DEBUG_LL_OMAP3(1, omap_3430sdp);
+                DEBUG_LL_OMAP3(1, omap_3630sdp);
+                DEBUG_LL_OMAP3(1, omap3530_lv_som);
+                DEBUG_LL_OMAP3(1, omap3_torpedo);
+
+                /* omap3 based boards using UART3 */
+                DEBUG_LL_OMAP3(3, cm_t35);
+                DEBUG_LL_OMAP3(3, cm_t3517);
+                DEBUG_LL_OMAP3(3, cm_t3730);
+                DEBUG_LL_OMAP3(3, craneboard);
+                DEBUG_LL_OMAP3(3, devkit8000);
+                DEBUG_LL_OMAP3(3, igep0020);
+                DEBUG_LL_OMAP3(3, igep0030);
+                DEBUG_LL_OMAP3(3, nokia_rm680);
+                DEBUG_LL_OMAP3(3, nokia_rx51);
+                DEBUG_LL_OMAP3(3, omap3517evm);
+                DEBUG_LL_OMAP3(3, omap3_beagle);
+                DEBUG_LL_OMAP3(3, omap3_pandora);
+                DEBUG_LL_OMAP3(3, omap_ldp);
+                DEBUG_LL_OMAP3(3, overo);
+                DEBUG_LL_OMAP3(3, touchbook);
+
+                /* omap4 based boards using UART3 */
+                DEBUG_LL_OMAP4(3, omap_4430sdp);
+                DEBUG_LL_OMAP4(3, omap4_panda);
+
+                /* zoom2/3 external uart */
+                DEBUG_LL_ZOOM(omap_zoom2);
+                DEBUG_LL_ZOOM(omap_zoom3);
+
+                /* TI8168 base boards using UART3 */
+                DEBUG_LL_TI816X(3, ti8168evm);
+
+        } while (0);
+}
+
+#define arch_decomp_setup()     __arch_decomp_setup(arch_id)
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
new file mode 100644
index 00000000000..17d3c939775
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -0,0 +1,296 @@
+// include/asm-arm/mach-omap/usb.h
+
+#ifndef __ASM_ARCH_OMAP_USB_H
+#define __ASM_ARCH_OMAP_USB_H
+
+#include <linux/usb/musb.h>
+#include <plat/board.h>
+
+#define OMAP3_HS_USB_PORTS      3
+
+enum usbhs_omap_port_mode {
+        OMAP_USBHS_PORT_MODE_UNUSED,
+        OMAP_EHCI_PORT_MODE_PHY,
+        OMAP_EHCI_PORT_MODE_TLL,
+        OMAP_EHCI_PORT_MODE_HSIC,
+        OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0,
+        OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM,
+        OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0,
+        OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM,
+        OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0,
+        OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM,
+        OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0,
+        OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM,
+        OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0,
+        OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM
+};
+
+struct usbhs_omap_board_data {
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
+
+        /* have to be valid if phy_reset is true and portx is in phy mode */
+        int     reset_gpio_port[OMAP3_HS_USB_PORTS];
+
+        /* Set this to true for ES2.x silicon */
+        unsigned                        es2_compatibility:1;
+
+        unsigned                        phy_reset:1;
+
+        /*
+         * Regulators for USB PHYs.
+         * Each PHY can have a separate regulator.
+         */
+        struct regulator                *regulator[OMAP3_HS_USB_PORTS];
+};
+
+struct ehci_hcd_omap_platform_data {
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
+        int                             reset_gpio_port[OMAP3_HS_USB_PORTS];
+        struct regulator                *regulator[OMAP3_HS_USB_PORTS];
+        unsigned                        phy_reset:1;
+};
+
+struct ohci_hcd_omap_platform_data {
+        enum usbhs_omap_port_mode       port_mode[OMAP3_HS_USB_PORTS];
+        unsigned                        es2_compatibility:1;
+};
+
+struct usbhs_omap_platform_data {
+        enum usbhs_omap_port_mode               port_mode[OMAP3_HS_USB_PORTS];
+
+        struct ehci_hcd_omap_platform_data      *ehci_data;
+        struct ohci_hcd_omap_platform_data      *ohci_data;
+};
+/*-------------------------------------------------------------------------*/
+
+#define OMAP1_OTG_BASE                  0xfffb0400
+#define OMAP1_UDC_BASE                  0xfffb4000
+#define OMAP1_OHCI_BASE                 0xfffba000
+
+#define OMAP2_OHCI_BASE                 0x4805e000
+#define OMAP2_UDC_BASE                  0x4805e200
+#define OMAP2_OTG_BASE                  0x4805e300
+
+#ifdef CONFIG_ARCH_OMAP1
+
+#define OTG_BASE                        OMAP1_OTG_BASE
+#define UDC_BASE                        OMAP1_UDC_BASE
+#define OMAP_OHCI_BASE                  OMAP1_OHCI_BASE
+
+#else
+
+#define OTG_BASE                        OMAP2_OTG_BASE
+#define UDC_BASE                        OMAP2_UDC_BASE
+#define OMAP_OHCI_BASE                  OMAP2_OHCI_BASE
+
+struct omap_musb_board_data {
+        u8      interface_type;
+        u8      mode;
+        u16     power;
+        unsigned extvbus:1;
+        void    (*set_phy_power)(u8 on);
+        void    (*clear_irq)(void);
+        void    (*set_mode)(u8 mode);
+        void    (*reset)(void);
+};
+
+enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
+
+extern void usb_musb_init(struct omap_musb_board_data *board_data);
+
+extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
+
+extern int omap_usbhs_enable(struct device *dev);
+extern void omap_usbhs_disable(struct device *dev);
+
+extern int omap4430_phy_power(struct device *dev, int ID, int on);
+extern int omap4430_phy_set_clk(struct device *dev, int on);
+extern int omap4430_phy_init(struct device *dev);
+extern int omap4430_phy_exit(struct device *dev);
+extern int omap4430_phy_suspend(struct device *dev, int suspend);
+#endif
+
+extern void am35x_musb_reset(void);
+extern void am35x_musb_phy_power(u8 on);
+extern void am35x_musb_clear_irq(void);
+extern void am35x_set_mode(u8 musb_mode);
+
+/*
+ * FIXME correct answer depends on hmc_mode,
+ * as does (on omap1) any nonzero value for config->otg port number
+ */
+#ifdef  CONFIG_USB_GADGET_OMAP
+#define is_usb0_device(config)  1
+#else
+#define is_usb0_device(config)  0
+#endif
+
+void omap_otg_init(struct omap_usb_config *config);
+
+#if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE)
+void omap1_usb_init(struct omap_usb_config *pdata);
+#else
+static inline void omap1_usb_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE)
+void omap2_usbfs_init(struct omap_usb_config *pdata);
+#else
+static inline void omap2_usbfs_init(struct omap_usb_config *pdata)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * OTG and transceiver registers, for OMAPs starting with ARM926
+ */
+#define OTG_REV                         (OTG_BASE + 0x00)
+#define OTG_SYSCON_1                    (OTG_BASE + 0x04)
+#       define   USB2_TRX_MODE(w)       (((w)>>24)&0x07)
+#       define   USB1_TRX_MODE(w)       (((w)>>20)&0x07)
+#       define   USB0_TRX_MODE(w)       (((w)>>16)&0x07)
+#       define   OTG_IDLE_EN            (1 << 15)
+#       define   HST_IDLE_EN            (1 << 14)
+#       define   DEV_IDLE_EN            (1 << 13)
+#       define   OTG_RESET_DONE         (1 << 2)
+#       define   OTG_SOFT_RESET         (1 << 1)
+#define OTG_SYSCON_2                    (OTG_BASE + 0x08)
+#       define   OTG_EN                 (1 << 31)
+#       define   USBX_SYNCHRO           (1 << 30)
+#       define   OTG_MST16              (1 << 29)
+#       define   SRP_GPDATA             (1 << 28)
+#       define   SRP_GPDVBUS            (1 << 27)
+#       define   SRP_GPUVBUS(w)         (((w)>>24)&0x07)
+#       define   A_WAIT_VRISE(w)        (((w)>>20)&0x07)
+#       define   B_ASE_BRST(w)          (((w)>>16)&0x07)
+#       define   SRP_DPW                (1 << 14)
+#       define   SRP_DATA               (1 << 13)
+#       define   SRP_VBUS               (1 << 12)
+#       define   OTG_PADEN              (1 << 10)
+#       define   HMC_PADEN              (1 << 9)
+#       define   UHOST_EN               (1 << 8)
+#       define   HMC_TLLSPEED           (1 << 7)
+#       define   HMC_TLLATTACH          (1 << 6)
+#       define   OTG_HMC(w)             (((w)>>0)&0x3f)
+#define OTG_CTRL                        (OTG_BASE + 0x0c)
+#       define   OTG_USB2_EN            (1 << 29)
+#       define   OTG_USB2_DP            (1 << 28)
+#       define   OTG_USB2_DM            (1 << 27)
+#       define   OTG_USB1_EN            (1 << 26)
+#       define   OTG_USB1_DP            (1 << 25)
+#       define   OTG_USB1_DM            (1 << 24)
+#       define   OTG_USB0_EN            (1 << 23)
+#       define   OTG_USB0_DP            (1 << 22)
+#       define   OTG_USB0_DM            (1 << 21)
+#       define   OTG_ASESSVLD           (1 << 20)
+#       define   OTG_BSESSEND           (1 << 19)
+#       define   OTG_BSESSVLD           (1 << 18)
+#       define   OTG_VBUSVLD            (1 << 17)
+#       define   OTG_ID                 (1 << 16)
+#       define   OTG_DRIVER_SEL         (1 << 15)
+#       define   OTG_A_SETB_HNPEN       (1 << 12)
+#       define   OTG_A_BUSREQ           (1 << 11)
+#       define   OTG_B_HNPEN            (1 << 9)
+#       define   OTG_B_BUSREQ           (1 << 8)
+#       define   OTG_BUSDROP            (1 << 7)
+#       define   OTG_PULLDOWN           (1 << 5)
+#       define   OTG_PULLUP             (1 << 4)
+#       define   OTG_DRV_VBUS           (1 << 3)
+#       define   OTG_PD_VBUS            (1 << 2)
+#       define   OTG_PU_VBUS            (1 << 1)
+#       define   OTG_PU_ID              (1 << 0)
+#define OTG_IRQ_EN                      (OTG_BASE + 0x10)       /* 16-bit */
+#       define   DRIVER_SWITCH          (1 << 15)
+#       define   A_VBUS_ERR             (1 << 13)
+#       define   A_REQ_TMROUT           (1 << 12)
+#       define   A_SRP_DETECT           (1 << 11)
+#       define   B_HNP_FAIL             (1 << 10)
+#       define   B_SRP_TMROUT           (1 << 9)
+#       define   B_SRP_DONE             (1 << 8)
+#       define   B_SRP_STARTED          (1 << 7)
+#       define   OPRT_CHG               (1 << 0)
+#define OTG_IRQ_SRC                     (OTG_BASE + 0x14)       /* 16-bit */
+        // same bits as in IRQ_EN
+#define OTG_OUTCTRL                     (OTG_BASE + 0x18)       /* 16-bit */
+#       define   OTGVPD                 (1 << 14)
+#       define   OTGVPU                 (1 << 13)
+#       define   OTGPUID                (1 << 12)
+#       define   USB2VDR                (1 << 10)
+#       define   USB2PDEN               (1 << 9)
+#       define   USB2PUEN               (1 << 8)
+#       define   USB1VDR                (1 << 6)
+#       define   USB1PDEN               (1 << 5)
+#       define   USB1PUEN               (1 << 4)
+#       define   USB0VDR                (1 << 2)
+#       define   USB0PDEN               (1 << 1)
+#       define   USB0PUEN               (1 << 0)
+#define OTG_TEST                        (OTG_BASE + 0x20)       /* 16-bit */
+#define OTG_VENDOR_CODE                 (OTG_BASE + 0xfc)       /* 16-bit */
+
+/*-------------------------------------------------------------------------*/
+
+/* OMAP1 */
+#define USB_TRANSCEIVER_CTRL            (0xfffe1000 + 0x0064)
+#       define  CONF_USB2_UNI_R         (1 << 8)
+#       define  CONF_USB1_UNI_R         (1 << 7)
+#       define  CONF_USB_PORT0_R(x)     (((x)>>4)&0x7)
+#       define  CONF_USB0_ISOLATE_R     (1 << 3)
+#       define  CONF_USB_PWRDN_DM_R     (1 << 2)
+#       define  CONF_USB_PWRDN_DP_R     (1 << 1)
+
+/* OMAP2 */
+#       define  USB_UNIDIR                      0x0
+#       define  USB_UNIDIR_TLL                  0x1
+#       define  USB_BIDIR                       0x2
+#       define  USB_BIDIR_TLL                   0x3
+#       define  USBTXWRMODEI(port, x)   ((x) << (22 - (port * 2)))
+#       define  USBT2TLL5PI             (1 << 17)
+#       define  USB0PUENACTLOI          (1 << 16)
+#       define  USBSTANDBYCTRL          (1 << 15)
+/* AM35x */
+/* USB 2.0 PHY Control */
+#define CONF2_PHY_GPIOMODE      (1 << 23)
+#define CONF2_OTGMODE           (3 << 14)
+#define CONF2_NO_OVERRIDE       (0 << 14)
+#define CONF2_FORCE_HOST        (1 << 14)
+#define CONF2_FORCE_DEVICE      (2 << 14)
+#define CONF2_FORCE_HOST_VBUS_LOW (3 << 14)
+#define CONF2_SESENDEN          (1 << 13)
+#define CONF2_VBDTCTEN          (1 << 12)
+#define CONF2_REFFREQ_24MHZ     (2 << 8)
+#define CONF2_REFFREQ_26MHZ     (7 << 8)
+#define CONF2_REFFREQ_13MHZ     (6 << 8)
+#define CONF2_REFFREQ           (0xf << 8)
+#define CONF2_PHYCLKGD          (1 << 7)
+#define CONF2_VBUSSENSE         (1 << 6)
+#define CONF2_PHY_PLLON         (1 << 5)
+#define CONF2_RESET             (1 << 4)
+#define CONF2_PHYPWRDN          (1 << 3)
+#define CONF2_OTGPWRDN          (1 << 2)
+#define CONF2_DATPOL            (1 << 1)
+
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB)
+u32 omap1_usb0_init(unsigned nwires, unsigned is_device);
+u32 omap1_usb1_init(unsigned nwires);
+u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup);
+#else
+static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device)
+{
+        return 0;
+}
+static inline u32 omap1_usb1_init(unsigned nwires)
+{
+        return 0;
+
+}
+static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
+{
+        return 0;
+}
+#endif
+
+#endif  /* __ASM_ARCH_OMAP_USB_H */
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
new file mode 100644
index 00000000000..0aa4ecd12c7
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -0,0 +1,62 @@
+/*
+ * VRAM manager for OMAP
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRAM_H__
+#define __OMAP_VRAM_H__
+
+#include <linux/types.h>
+
+#define OMAP_VRAM_MEMTYPE_SDRAM         0
+#define OMAP_VRAM_MEMTYPE_SRAM          1
+#define OMAP_VRAM_MEMTYPE_MAX           1
+
+extern int omap_vram_add_region(unsigned long paddr, size_t size);
+extern int omap_vram_free(unsigned long paddr, size_t size);
+extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_reserve(unsigned long paddr, size_t size);
+extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
+                unsigned long *largest_free_block);
+
+#ifdef CONFIG_OMAP2_VRAM
+extern void omap_vram_set_sdram_vram(u32 size, u32 start);
+extern void omap_vram_set_sram_vram(u32 size, u32 start);
+
+extern void omap_vram_reserve_sdram_memblock(void);
+extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+                                            unsigned long sram_vstart,
+                                            unsigned long sram_size,
+                                            unsigned long pstart_avail,
+                                            unsigned long size_avail);
+#else
+static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
+static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
+
+static inline void omap_vram_reserve_sdram_memblock(void) { }
+static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+                                            unsigned long sram_vstart,
+                                            unsigned long sram_size,
+                                            unsigned long pstart_avail,
+                                            unsigned long size_avail)
+{
+        return 0;
+}
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
new file mode 100644
index 00000000000..3792bdea2f6
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vrfb.h
@@ -0,0 +1,66 @@
+/*
+ * VRFB Rotation Engine
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRFB_H__
+#define __OMAP_VRFB_H__
+
+#define OMAP_VRFB_LINE_LEN 2048
+
+struct vrfb {
+        u8 context;
+        void __iomem *vaddr[4];
+        unsigned long paddr[4];
+        u16 xres;
+        u16 yres;
+        u16 xoffset;
+        u16 yoffset;
+        u8 bytespp;
+        bool yuv_mode;
+};
+
+#ifdef CONFIG_OMAP2_VRFB
+extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
+                u8 bytespp);
+extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
+extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
+extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+                u16 width, u16 height,
+                unsigned bytespp, bool yuv_mode);
+extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
+extern void omap_vrfb_restore_context(void);
+
+#else
+static inline int omap_vrfb_request_ctx(struct vrfb *vrfb) { return 0; }
+static inline void omap_vrfb_release_ctx(struct vrfb *vrfb) {}
+static inline void omap_vrfb_adjust_size(u16 *width, u16 *height,
+                u8 bytespp) {}
+static inline u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp)
+                { return 0; }
+static inline u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp)
+                { return 0; }
+static inline void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+                u16 width, u16 height, unsigned bytespp, bool yuv_mode) {}
+static inline int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot)
+                { return 0; }
+static inline void omap_vrfb_restore_context(void) {}
+#endif
+#endif /* __VRFB_H */