aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts
Commit message (Collapse)AuthorAge
* ARM: mvebu: add Device Tree files for Armada 39x SoC and boardThomas Petazzoni2015-03-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds the Device Tree files for the Armada 39x family of processors, as well as one Armada 398 Development Board. Like for other Marvell EBU families, a common armada-39x.dtsi contains the description of the common features of all Armada 39x SoCs, while armada-390.dtsi and armada-398.dtsi respectively describe the specificities of those SoCs. Finally, an armada-398-db.dts file is added to describe the Armada 398 Development Board itself. So far, the following features are supported: * SMP: dual Cortex-A9 * Basic ARM IPs: SCU, timer, GIC, L2 cache * Basic Marvell IPs: pin-muxing, clocks, system controller, MBus controller, MPIC interrupt controller, timer, CPU reset for SMP, PMSU. * I2C * SPI * SDHCI * XOR * NAND * UART * PCIe Additional features will be supported in the future. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: fix unit address of MPIC nodesThomas Petazzoni2015-03-04
| | | | | | | | | | | | The Device Tree nodes describing the MPIC nodes on Armada 370, 375, 38x and XP had a unit address that did not match the first reg property, as suggested by the ePAPR. This commit fixes that. [gregory.clement@free-electrons.com: removed the armada-38x part, as it was already applied by a previous patch] Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: use stdout-path in all armada-*.dtsThomas Petazzoni2015-03-04
| | | | | | | | | | | This commit adds the stdout-path property in /chosen for all Armada boards that were not yet carrying this property, and gets rid of /chosen/bootargs which becomes unneeded: earlyprintk should not be used by default, and the console= parameter is replaced by the /chosen/stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: add serial port aliases on Armada 370/375/38x/XPThomas Petazzoni2015-03-04
| | | | | | | | | This commit adds 'serialX' aliases for the various serial ports on Armada 370, 375, 38x and XP platforms. It will allow the usage of the stdout-path property. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: remove aliases for Ethernet devices on Armada 370/375/38x/XPThomas Petazzoni2015-03-04
| | | | | | | | | | | | | Having aliases for Ethernet devices is useless, since the networking subsystem unfortunately doesn't care about aliases to name network interfaces. Note that the 'aliases' nodes in armada-370-xp.dtsi and armada-xp.dtsi become empty, but that we keep it as is since a followup patch will re-add some aliases to it. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: add UART labels to Armada 375Thomas Petazzoni2015-03-04
| | | | | | | | This commit adds the standard uart0 and uart1 DT labels to the Device Tree description of the Marvell Armada 375 SoC. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: add missing UART labels on Armada 38xThomas Petazzoni2015-03-04
| | | | | | | | | The Armada 38x had a label for UART0, but not UART1. This commit fixes that. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: fix usb@ unit address on Armada 38x to match register addressThomas Petazzoni2015-03-04
| | | | | | | | | | | On Marvell Armada 38x, the USB2 controller registers are at 0x58000, so the corresponding Device Tree node should have a unit address of 58000, and not 50000. We were using 50000 due to an incorrect copy/pastebin of Armada 370/XP code. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: a385-db-ap: Enable the NANDMaxime Ripard2015-03-04
| | | | | | | | The Armada 385 Access Point Development Board has a 1GB NAND SLC chip from Micron as its main storage. Enable it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: ARMADA XP: WRT1900AC: Add support for the Ethernet switchAndrew Lunn2015-03-04
| | | | | | | Add a DSA section to the DT blob representing the Ethernet switch. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: Kirkwood: enable GPIO fan alarm support for 2Big Network v2Simon Guinot2015-03-04
| | | | | | | | | | | On the LaCie 2Big Network v2 (net2big_v2) board, the fan alarm is not wired to the I2C fan controller but to a separe GPIO. This GPIO can be controlled by using the gpio-fan driver. This patch adds the gpio-fan alarm description in the net2big_v2 DTS. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: Fix MPIC unit addressMaxime Ripard2015-03-04
| | | | | | | | | The unit-address is supposed to be equal the first reg address, which is not the case for the MPIC, that uses the mbus-controller one. Fix this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: dts: dove: Add some more common pinctrl settingsSebastian Hesselbarth2015-03-04
| | | | | | | | | | | This add common pinctrl settings for pcie[01]_clkreq, spi1, i2c[23], and internal i2c mux. These settings have either one or two options only, so put them into the SoC dtsi instead of repeating them on board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: dts: dove: Add node labels for PCIe ports 0 and 1Sebastian Hesselbarth2015-02-26
| | | | | | | | | Add pcie[01] node labels to allow to reference them easily from board level. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: dts: dove: Always include gpio and interrupt-controller headersSebastian Hesselbarth2015-02-26
| | | | | | | | | We want to enforce the use of named flags in GPIO and interrupt specifiers, include the corresponding headers to Dove's SoC dtsi. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: dts: dove: Fix uart[23] reg propertySebastian Hesselbarth2015-02-26
| | | | | | | | | | Fix Dove's register addresses of uart2 and uart3 nodes that seem to be broken since ages due to a copy-and-paste error. Cc: <stable@vger.kernel.org> # 3.7+ Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: add Linksys WRT1900AC (Mamba) supportImre Kaloz2015-02-26
| | | | | | | | | | | | | | | | | | | The Linksys WRT1900AC (Mamba) is a router that has - 2 mini-PCIe slots with Marvell 88W8864 radios - 1 USB 3.0 port - 1 USB 2.0/eSATAp port - 2 Ethernet interfaces connected to a 88E6172 switch (1x WAN + 4x LAN) - 128MB NAND flash - 256MB RAM gregory.clement@free-electrons.com: - add ARM to the title - fix the reference to CONFIG_DEBUG_MVEBU_UART0_ALTERNATE - fix the unbalanced comment for the syscfg partition Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RDGregory CLEMENT2015-02-23
| | | | | | | The Device Tree description of SDHCI on Armada 388 RD board was missing. This commit adds the node for it. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: Update the SDHCI node on Armada 38xGregory CLEMENT2015-02-23
| | | | | | | | | The binding of the armada-380-sdhci has been extended with a new register in order to be able to use the SDR50 and DDR50 mode. This commit add the resource associated to this new register for the Armada 38x. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci nodeGregory CLEMENT2015-02-23
| | | | | | | | | Instead of hardcoding the values of the interrupt flags, use the macros provided by <include/dt-bindings/interrupt-controller/irq.h> and <include/dt-bindings/interrupt-controller/arm-gic.h> for the Armada 38x SDHCI node. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
* Merge tag 'fixes-for-linus' of ↵Linus Torvalds2015-02-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A few fixes that came in too late to make it into the first set of pull requests but would still be nice to have in -rc1. The majority of these are trivial build fixes for bugs that I found myself using randconfig testing, and a set of two patches from Uwe to mark DT strings as 'const' where appropriate, to resolve inconsistent section attributes" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: make of_device_ids const ARM: make arrays containing machine compatible strings const ARM: mm: Remove Kconfig symbol CACHE_PL310 ARM: rockchip: force built-in regulator support for PM ARM: mvebu: build armada375-smp code conditionally ARM: sti: always enable RESET_CONTROLLER ARM: rockchip: make rockchip_suspend_init conditional ARM: ixp4xx: fix {in,out}s{bwl} data types ARM: prima2: do not select SMP_ON_UP ARM: at91: fix pm declarations ARM: davinci: multi-soc kernels require AUTO_ZRELADDR ARM: davinci: davinci_cfg_reg cannot be init ARM: BCM: put back ARCH_MULTI_V7 dependency for mobile ARM: vexpress: use ARM_CPU_SUSPEND if needed ARM: dts: add I2C device nodes for Broadcom Cygnus ARM: dts: BCM63xx: fix L2 cache properties
| * Merge tag 'arm-soc/for-3.20/dts' of http://github.com/broadcom/stblinux into ↵Arnd Bergmann2015-02-18
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fixes This pull request contains the following Broadcom SoCs Device Tree changes: - Ray adds support for the Cygnus i2c Device Tree controller on Cygnus SoCs - Fixes to the BCM63138 dtsi file for the L2 cache controller properties * tag 'arm-soc/for-3.20/dts' of http://github.com/broadcom/stblinux: ARM: dts: add I2C device nodes for Broadcom Cygnus ARM: dts: BCM63xx: fix L2 cache properties
| | * ARM: dts: add I2C device nodes for Broadcom CygnusRay Jui2015-02-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add I2C device nodes and its properties in bcm-cygnus.dtsi but keep them disabled there. Individual I2C devices can be enabled in board specific dts file when I2C slave devices are enabled in the future Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
| | * ARM: dts: BCM63xx: fix L2 cache propertiesFlorian Fainelli2015-02-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The L2 cache properties were completely off with respect to what the hardware is configured for. Fix the cache-size, cache-line-size and cache-sets to reflect the L2 cache controller we have: 512KB, 16 ways and 32 bytes per cache-line. Fixes: 46d4bca0445a0 ("ARM: BCM63XX: add BCM63138 minimal Device Tree") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* | | Merge tag 'clk-for-linus-3.20' of ↵Linus Torvalds2015-02-21
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.linaro.org/people/mike.turquette/linux Pull clock framework updates from Mike Turquette: "The clock framework changes contain the usual driver additions, enhancements and fixes mostly for ARM32, ARM64, MIPS and Power-based devices. Additionally the framework core underwent a bit of surgery with two major changes: - The boundary between the clock core and clock providers (e.g clock drivers) is now more well defined with dedicated provider helper functions. struct clk no longer maps 1:1 with the hardware clock but is a true per-user cookie which helps us tracker users of hardware clocks and debug bad behavior. - The addition of rate constraints for clocks. Rate ranges are now supported which are analogous to the voltage ranges in the regulator framework. Unfortunately these changes to the core created some breakeage. We think we fixed it all up but for this reason there are lots of last minute commits trying to undo the damage" * tag 'clk-for-linus-3.20' of git://git.linaro.org/people/mike.turquette/linux: (113 commits) clk: Only recalculate the rate if needed Revert "clk: mxs: Fix invalid 32-bit access to frac registers" clk: qoriq: Add support for the platform PLL powerpc/corenet: Enable CLK_QORIQ clk: Replace explicit clk assignment with __clk_hw_set_clk clk: Add __clk_hw_set_clk helper function clk: Don't dereference parent clock if is NULL MIPS: Alchemy: Remove bogus args from alchemy_clk_fgcs_detr clkdev: Always allocate a struct clk and call __clk_get() w/ CCF clk: shmobile: div6: Avoid division by zero in .round_rate() clk: mxs: Fix invalid 32-bit access to frac registers clk: omap: compile legacy omap3 clocks conditionally clkdev: Export clk_register_clkdev clk: Add rate constraints to clocks clk: remove clk-private.h pci: xgene: do not use clk-private.h arm: omap2+ remove dead clock code clk: Make clk API return per-user struct clk instances clk: tegra: Define PLLD_DSI and remove dsia(b)_mux clk: tegra: Add support for the Tegra132 CAR IP block ...
| * \ \ Merge branch 'clk-next' into v3.19-rc7Michael Turquette2015-02-02
| |\ \ \
| | * | | ARM: sunxi: dt: Add sample and output mmc clocksMaxime Ripard2015-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the sample and output clocks for the MMC phase support. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Chen-Yu Tsai <wens@csie.org>
| | * | | ARM: dts: sun8i: Add PLL6 and MBUS clock nodesChen-Yu Tsai2014-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the clock driver supports PLL6 and MBUS on sun8i correctly, add the corresponding clock nodes to the dtsi. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | | ARM: dts: sun8i: Unify ahb1 clock nodesChen-Yu Tsai2014-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock driver has unified support for the ahb1 clock. Unify the clock nodes so it works. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | | ARM: dts: sun6i: Unify ahb1 clock nodesChen-Yu Tsai2014-12-21
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | The clock driver has unified support for the ahb1 clock. Unify the clock nodes so it works. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | | | Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2015-02-18
|\ \ \ \ | |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull dmaengine updates from Vinod Koul: "This update brings: - the big cleanup up by Maxime for device control and slave capabilities. This makes the API much cleaner. - new IMG MDC driver by Andrew - new Renesas R-Car Gen2 DMA Controller driver by Laurent along with bunch of fixes on rcar drivers - odd fixes and updates spread over driver" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (130 commits) dmaengine: pl330: add DMA_PAUSE feature dmaengine: pl330: improve pl330_tx_status() function dmaengine: rcar-dmac: Disable channel 0 when using IOMMU dmaengine: rcar-dmac: Work around descriptor mode IOMMU errata dmaengine: rcar-dmac: Allocate hardware descriptors with DMAC device dmaengine: rcar-dmac: Fix oops due to unintialized list in error ISR dmaengine: rcar-dmac: Fix spinlock issues in interrupt dmaenegine: edma: fix sparse warnings dmaengine: rcar-dmac: Fix uninitialized variable usage dmaengine: shdmac: extend PM methods dmaengine: shdmac: use SET_RUNTIME_PM_OPS() dmaengine: pl330: fix bug that cause start the same descs in cyclic dmaengine: at_xdmac: allow muliple dwidths when doing slave transfers dmaengine: at_xdmac: simplify channel configuration stuff dmaengine: at_xdmac: introduce save_cc field dmaengine: at_xdmac: wait for in-progress transaction to complete after pausing a channel ioat: fail self-test if wait_for_completion times out dmaengine: dw: define DW_DMA_MAX_NR_MASTERS dmaengine: dw: amend description of dma_dev field dmatest: move src_off, dst_off, len inside loop ...
| * | | dmaengine: dw: define DW_DMA_MAX_NR_MASTERSAndy Shevchenko2015-02-05
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of using magic number in the code the patch provides DW_DMA_MAX_NR_MASTERS constant. While here, restrict the reading of data width array by amount of the actual number of AHB masters. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | | Merge tag 'drivers-for-linus' of ↵Linus Torvalds2015-02-17
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. This time around, much of this is for at91, with the bulk of it being syscon and udc drivers. Also, there's: - coupled cpuidle support for Samsung Exynos4210 - Renesas 73A0 common-clk work - of/platform changes to tear down DMA mappings on device destruction - a few updates to the TI Keystone knav code" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits) cpuidle: exynos: add coupled cpuidle support for exynos4210 ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM soc: ti: knav_qmss_queue: export API calls for use by user driver of/platform: teardown DMA mappings on device destruction usb: gadget: at91_udc: Allocate udc instance usb: gadget: at91_udc: Update DT binding documentation usb: gadget: at91_udc: Rework for multi-platform kernel support usb: gadget: at91_udc: Simplify probe and remove functions usb: gadget: at91_udc: Remove non-DT handling code usb: gadget: at91_udc: Document DT clocks and clock-names property usb: gadget: at91_udc: Drop uclk clock usb: gadget: at91_udc: Fix clock names mfd: syscon: Add Atmel SMC binding doc mfd: syscon: Add atmel-smc registers definition mfd: syscon: Add Atmel Matrix bus DT binding documentation mfd: syscon: Add atmel-matrix registers definition clk: shmobile: fix sparse NULL pointer warning ...
| * \ \ Merge tag 'renesas-sh73a0-ccf-for-v3.20' of ↵Olof Johansson2015-01-12
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers Merge "Renesas ARM Based SoC sh73a0 CCF Updates for v3.20" from Simon Horman: * Add sh73a0 CCF support * tag 'renesas-sh73a0-ccf-for-v3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0: disable legacy clock initialization ARM: shmobile: sh73a0: add MSTP clock assignments to DT ARM: shmobile: kzm9g-reference: Common clock framework DT description ARM: shmobile: sh73a0: Common clock framework DT description ARM: shmobile: sh73a0: Add CPG register bits header clk: shmobile: sh73a0 common clock framework implementation Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | ARM: shmobile: sh73a0: add MSTP clock assignments to DTUlrich Hecht2014-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assigns clocks to cmt1, i2c*, mmcif, sdhi*, and scif*. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| | * | | ARM: shmobile: kzm9g-reference: Common clock framework DT descriptionUlrich Hecht2014-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KZM9G-specific clock overrides. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
| | * | | ARM: shmobile: sh73a0: Common clock framework DT descriptionUlrich Hecht2014-12-21
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Declares all sh73a0 clocks supported by the legacy clock framework. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* | | | Merge tag 'dt-for-linus' of ↵Linus Torvalds2015-02-17
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC DT updates from Olof Johansson: "DT changes continue to be the bulk of our merge window contents. We continue to have a large set of changes across the board as new platforms and drivers are added. Some of the new platforms are: - Alphascale ASM9260 - Marvell Armada 388 - CSR Atlas7 - TI Davinci DM816x - Hisilicon HiP01 - ST STiH418 There have also been some sweeping changes, including relicensing of DTS contents from GPL to GPLv2+/X11 so that the same files can be reused in other non-GPL projects more easily. There's also been changes to the DT Makefile to make it a little less conflict-ridden and churny down the road" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits) ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 ARM: dts: am57xx-beagle-x15: Fix USB2 mode ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB ARM: dts: dra72-evm: Add extcon nodes for USB ARM: dts: dra7-evm: Add extcon nodes for USB ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb ...
| * \ \ \ Merge tag 'samsung-dt-4' of ↵Olof Johansson2015-02-06
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung 4th DT updates for v3.20" from Kukjin Kim: - For exynos4 SoCs : add PPMU node : add syscon phandle for video-phy node - For exynos4415 SoC : add mipi dsi and fimd device nodes - For exynos3250-monk and exynos3250-rinato boards : add PPMU node - For exynos4412-trats2 board : add maxim77693 fuel gauge and battery charger nodes : fix regarding CLK_MOUT_CAMn parent and CLK_UART_ISP_SCLK clocks : switch max77686 regulators to GPIO control : add suspend configuration for max77686 regulators : add PPMU node and sound nodes * tag 'samsung-dt-4' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add PPMU node for exynos4412-trats2 ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato ARM: dts: Add PPMU dt node for exynos4 and exynos4210 ARM: dts: Add PPMU dt node for exynos3250 ARM: dts: add mipi dsi device node for exynos4415 ARM: dts: add fimd device node for exynos4415 ARM: dts: Add syscon phandle to the video-phy node for Exynos4 ARM: dts: Add sound nodes for exynos4412-trats2 ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2 ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi ARM: dts: Add max77693 charger node for exynos4412-trats2 ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2 ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2 ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2 Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | | ARM: dts: Add PPMU node for exynos4412-trats2Chanwoo Choi2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add dt node for PPMU_{DMC0|DMC1|LEFTBUS|RIGHTBUS} for exynos4412-trats2 board. Each PPMU dt node includes one event of 'PPMU Count3'. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinatoChanwoo Choi2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds PPMU dt node for Exynos3250 based Rinato and Monk boards. The PPMU node is used to get the utilization of DMC0/DMC1/ LEFTBUS/RIGHTBUS Block. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Add PPMU dt node for exynos4 and exynos4210Chanwoo Choi2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add PPMUs (Platform Performance Monitoring Unit) dt node for Exynos4 (Exynos4210/4212/4412) SoCs. PPMU dt node is used for monitor the utilization of each IP. The Exynos4210/Exynos4212/Exynos4412 SoC includes following PPMUs: - PPMU_DMC0 0x106A_0000 - PPMU_DMC1 0x106B_0000 - PPMU_CPU 0x106C_0000 - PPMU_ACP 0x10AE_0000 - PPMU_RIGHT_BUS 0x112A_0000 - PPMU_LEFT_BUS 0x116A_0000 - PPMU_FSYS 0x1263_0000 - PPMU_LCD0 0x11E4_0000 - PPMU_CAMIF 0x11AC_0000 - PPMU_IMAGE 0x12AA_0000 - PPMU_TV 0x12E4_0000 - PPMU_3D 0x1322_0000 - PPMU_MFC_LEFT 0x1366_0000 - PPMU_MFC_RIGHT 0x1367_0000 Additionally, the Exynos4210 SoC includes following PPMUs: - PPMU_LCD1 0x1224_0000 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Add PPMU dt node for exynos3250Chanwoo Choi2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds PPMU (Platform Performance Monitoring Unit) dt node to estimate the utilization of each IP in Exynos SoC through DEVFREQ Event subsystem. This patch adds following PPMU dt nodes: - PPMU_DMC0 0x106a0000 - PPMU_DMC1 0x106b0000 - PPMU_RIGHTBUS 0x112A0000 - PPMU_LEFTBUS 0x116A0000 - PPMU_CAMIF 0x11AC0000 - PPMU_LCD0 0x11E40000 - PPMU_FSYS 0x12630000 - PPMU_3D 0x13220000 - PPMU_MFC 0x13660000 - PPMU_CPU 0x106c0000 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: add mipi dsi device node for exynos4415YoungJun Cho2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds mipi dsi device node to exynos4415.dtsi. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: add fimd device node for exynos4415YoungJun Cho2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds fimd device node to exynos4415.dtsi. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Add syscon phandle to the video-phy node for Exynos4Sylwester Nawrocki2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is required to fix regression after introducing the PMU device nodes required for the PMU driver modified in commit 14fc8b93d473 ("ARM: EXYNOS: Add platform driver support for Exynos PMU"). This change is needed to make MIPI DSI displays and MIPI CSI-2 camera sensors working again on Exynos4 boards. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Add sound nodes for exynos4412-trats2Inha Song2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add WM1811 audio codec, I2S interface and the sound machine nodes to enable audio on exynos4412-trats2 board. Signed-off-by: Inha Song <ideal.song@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2Sylwester Nawrocki2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to get exact 24MHz clock frequency value for the camera sensor and avoid rounding errors the parent clock must be CLK_XUSBXTI, not CLK_MOUT_MPLL_USER_T. Currently the sensor's master clock frequency is too high and the sensor doesn't work properly. This fixes commit 0357a4438d531ef3cf529e80ffcd208eb8e35f55 ("ARM: dts: Specify default clocks for Exynos4 camera devices"). Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsiSylwester Nawrocki2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assign proper FIMC-IS UART gate clock in the device DT node and not use the SRC_MASK gate. This fixes regression introduced in commit a37c82a3b3c0910019abfd22a97be1f ("clk: samsung: exynos4: Remove SRC_MASK_ISP gates"). Without this change exynos4 fimc-is driver fails to probe with an error log: [ 1.842447] ERROR: could not get clock /camera/fimc-is@12000000:uart(13) [ 1.848529] exynos4-fimc-is 12000000.fimc-is: failed to get clock: uart [ 1.855275] exynos4-fimc-is: probe of 12000000.fimc-is failed with error -2 Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
| | * | | | ARM: dts: Add max77693 charger node for exynos4412-trats2Krzysztof Kozlowski2015-02-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add to Trats2 DTS new node for configuring the max77693 charger driver. Only the maxim,constant-microvolt differs from default value but set all of the optional properties anyway. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 00:30:07 -0500