1 files changed, 317 insertions, 234 deletions

diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3ed757e6bcc8..a13dbf3c2c05 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -22,8 +22,8 @@
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 
@@ -31,7 +31,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,41 +39,148 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
+#include <mach/hardware.h>
 #include <mach/pxa-regs.h>
 #include <mach/pxa2xx-regs.h>
-#include <mach/pxa2xx-gpio.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa2xx_spi.h>
 #include <mach/trizeps4.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/ohci.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
 
-/********************************************************************************************
+/*      comment out the following line if you want to use the
+ *      Standard UART from PXA for serial / irda transmission
+ *      and acivate it if you have status leds connected */
+#define STATUS_LEDS_ON_STUART_PINS 1
+
+/*****************************************************************************
+ * MultiFunctionPins of CPU
+ *****************************************************************************/
+static unsigned long trizeps4_pin_config[] __initdata = {
+        /* Chip Selects */
+        GPIO15_nCS_1,           /* DiskOnChip CS */
+        GPIO93_GPIO,            /* TRIZEPS4_DOC_IRQ */
+        GPIO94_GPIO,            /* DOC lock */
+
+        GPIO78_nCS_2,           /* DM9000 CS */
+        GPIO101_GPIO,           /* TRIZEPS4_ETH_IRQ */
+
+        GPIO79_nCS_3,           /* Logic CS */
+        GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,       /* Logic irq */
+
+        /* LCD - 16bpp Active TFT */
+        GPIO58_LCD_LDD_0,
+        GPIO59_LCD_LDD_1,
+        GPIO60_LCD_LDD_2,
+        GPIO61_LCD_LDD_3,
+        GPIO62_LCD_LDD_4,
+        GPIO63_LCD_LDD_5,
+        GPIO64_LCD_LDD_6,
+        GPIO65_LCD_LDD_7,
+        GPIO66_LCD_LDD_8,
+        GPIO67_LCD_LDD_9,
+        GPIO68_LCD_LDD_10,
+        GPIO69_LCD_LDD_11,
+        GPIO70_LCD_LDD_12,
+        GPIO71_LCD_LDD_13,
+        GPIO72_LCD_LDD_14,
+        GPIO73_LCD_LDD_15,
+        GPIO74_LCD_FCLK,
+        GPIO75_LCD_LCLK,
+        GPIO76_LCD_PCLK,
+        GPIO77_LCD_BIAS,
+
+        /* UART */
+        GPIO9_FFUART_CTS,
+        GPIO10_FFUART_DCD,
+        GPIO16_FFUART_TXD,
+        GPIO33_FFUART_DSR,
+        GPIO38_FFUART_RI,
+        GPIO82_FFUART_DTR,
+        GPIO83_FFUART_RTS,
+        GPIO96_FFUART_RXD,
+
+        GPIO42_BTUART_RXD,
+        GPIO43_BTUART_TXD,
+        GPIO44_BTUART_CTS,
+        GPIO45_BTUART_RTS,
+#ifdef STATUS_LEDS_ON_STUART_PINS
+        GPIO46_GPIO,
+        GPIO47_GPIO,
+#else
+        GPIO46_STUART_RXD,
+        GPIO47_STUART_TXD,
+#endif
+        /* PCMCIA */
+        GPIO11_GPIO,                    /* TRIZEPS4_CD_IRQ */
+        GPIO13_GPIO,                    /* TRIZEPS4_READY_NINT */
+        GPIO48_nPOE,
+        GPIO49_nPWE,
+        GPIO50_nPIOR,
+        GPIO51_nPIOW,
+        GPIO54_nPCE_2,
+        GPIO55_nPREG,
+        GPIO56_nPWAIT,
+        GPIO57_nIOIS16,
+        GPIO102_nPCE_1,
+        GPIO104_PSKTSEL,
+
+        /* MultiMediaCard */
+        GPIO32_MMC_CLK,
+        GPIO92_MMC_DAT_0,
+        GPIO109_MMC_DAT_1,
+        GPIO110_MMC_DAT_2,
+        GPIO111_MMC_DAT_3,
+        GPIO112_MMC_CMD,
+        GPIO12_GPIO,                    /* TRIZEPS4_MMC_IRQ */
+
+        /* USB OHCI */
+        GPIO88_USBH1_PWR,               /* USBHPWR1 */
+        GPIO89_USBH1_PEN,               /* USBHPEN1 */
+
+        /* I2C */
+        GPIO117_I2C_SCL,
+        GPIO118_I2C_SDA,
+};
+
+static unsigned long trizeps4wl_pin_config[] __initdata = {
+        /* SSP 2 */
+        GPIO14_SSP2_SFRM,
+        GPIO19_SSP2_SCLK,
+        GPIO53_GPIO,                    /* TRIZEPS4_SPI_IRQ */
+        GPIO86_SSP2_RXD,
+        GPIO87_SSP2_TXD,
+};
+
+/****************************************************************************
  * ONBOARD FLASH
- ********************************************************************************************/
+ ****************************************************************************/
 static struct mtd_partition trizeps4_partitions[] = {
         {
                 .name =         "Bootloader",
                 .offset =       0x00000000,
                 .size =         0x00040000,
                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
-        },{
+        }, {
                 .name =         "Backup",
                 .offset =       0x00040000,
                 .size =         0x00040000,
-        },{
+        }, {
                 .name =         "Image",
                 .offset =       0x00080000,
                 .size =         0x01080000,
-        },{
+        }, {
                 .name =         "IPSM",
                 .offset =       0x01100000,
                 .size =         0x00e00000,
-        },{
+        }, {
                 .name =         "Registry",
                 .offset =       0x01f00000,
                 .size =         MTDPART_SIZ_FULL,
@@ -105,9 +211,9 @@ static struct platform_device flash_device = {
         .num_resources = 1,
 };
 
-/********************************************************************************************
+/****************************************************************************
  * DAVICOM DM9000 Ethernet
- ********************************************************************************************/
+ ****************************************************************************/
 static struct resource dm9000_resources[] = {
         [0] = {
                 .start  = TRIZEPS4_ETH_PHYS+0x300,
@@ -122,67 +228,68 @@ static struct resource dm9000_resources[] = {
         [2] = {
                 .start  = TRIZEPS4_ETH_IRQ,
                 .end    = TRIZEPS4_ETH_IRQ,
-                .flags  = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING),
+                .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
         },
 };
 
+static struct dm9000_plat_data tri_dm9000_platdata = {
+        .flags          = DM9000_PLATF_32BITONLY,
+};
+
 static struct platform_device dm9000_device = {
         .name           = "dm9000",
         .id             = -1,
         .num_resources  = ARRAY_SIZE(dm9000_resources),
         .resource       = dm9000_resources,
+        .dev            = {
+                .platform_data = &tri_dm9000_platdata,
+        }
 };
 
-/********************************************************************************************
- * PXA270 serial ports
- ********************************************************************************************/
-static struct plat_serial8250_port tri_serial_ports[] = {
-#ifdef CONFIG_SERIAL_PXA
-        /* this uses the own PXA driver */
+/****************************************************************************
+ * LED's on GPIO pins of PXA
+ ****************************************************************************/
+static struct gpio_led trizeps4_led[] = {
+#ifdef STATUS_LEDS_ON_STUART_PINS
         {
-                0,
-        },
-#else
-        /* this uses the generic 8520 driver */
-        [0] = {
-                .membase        = (void *)&FFUART,
-                .irq            = IRQ_FFUART,
-                .flags          = UPF_BOOT_AUTOCONF,
-                .iotype         = UPIO_MEM32,
-                .regshift       = 2,
-                .uartclk        = (921600*16),
-        },
-        [1] = {
-                .membase        = (void *)&BTUART,
-                .irq            = IRQ_BTUART,
-                .flags          = UPF_BOOT_AUTOCONF,
-                .iotype         = UPIO_MEM32,
-                .regshift       = 2,
-                .uartclk        = (921600*16),
+                .name = "led0:orange:heartbeat",        /* */
+                .default_trigger = "heartbeat",
+                .gpio = GPIO_HEARTBEAT_LED,
+                .active_low = 1,
         },
         {
-                0,
+                .name = "led1:yellow:cpubusy",          /* */
+                .default_trigger = "cpu-busy",
+                .gpio = GPIO_SYS_BUSY_LED,
+                .active_low = 1,
         },
 #endif
 };
 
-static struct platform_device uart_devices = {
-        .name           = "serial8250",
-        .id             = 0,
+static struct gpio_led_platform_data trizeps4_led_data = {
+        .leds           = trizeps4_led,
+        .num_leds       = ARRAY_SIZE(trizeps4_led),
+};
+
+static struct platform_device leds_devices = {
+        .name           = "leds-gpio",
+        .id             = -1,
         .dev            = {
-                .platform_data  = tri_serial_ports,
+                .platform_data  = &trizeps4_led_data,
         },
-        .num_resources  = 0,
-        .resource       = NULL,
 };
 
-static struct platform_device * trizeps4_devices[] __initdata = {
+static struct platform_device *trizeps4_devices[] __initdata = {
         &flash_device,
-        &uart_devices,
         &dm9000_device,
+        &leds_devices,
+};
+
+static struct platform_device *trizeps4wl_devices[] __initdata = {
+        &flash_device,
+        &leds_devices,
 };
 
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 static short trizeps_conxs_bcr;
 
 /* PCCARD power switching supports only 3,3V */
@@ -192,108 +299,63 @@ void board_pcmcia_power(int power)
                 /* switch power on, put in reset and enable buffers */
                 trizeps_conxs_bcr |= power;
                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-                trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
-                ConXS_BCR = trizeps_conxs_bcr;
+                trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
+                BCR_writew(trizeps_conxs_bcr);
                 /* wait a little */
                 udelay(2000);
                 /* take reset away */
-                trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
-                ConXS_BCR = trizeps_conxs_bcr;
+                trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
+                BCR_writew(trizeps_conxs_bcr);
                 udelay(2000);
         } else {
                 /* put in reset */
                 trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-                ConXS_BCR = trizeps_conxs_bcr;
+                BCR_writew(trizeps_conxs_bcr);
                 udelay(1000);
                 /* switch power off */
-                trizeps_conxs_bcr &= ~(0xf);
-                ConXS_BCR = trizeps_conxs_bcr;
-
+                trizeps_conxs_bcr &= ~0xf;
+                BCR_writew(trizeps_conxs_bcr);
         }
-        pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
+        pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
+                        trizeps_conxs_bcr);
 }
+EXPORT_SYMBOL(board_pcmcia_power);
 
 /* backlight power switching for LCD panel */
 static void board_backlight_power(int on)
 {
-        if (on) {
+        if (on)
                 trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-        } else {
+        else
                 trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-        }
-        pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
-        ConXS_BCR = trizeps_conxs_bcr;
-}
 
-/* Powersupply for MMC/SD cardslot */
-static void board_mci_power(struct device *dev, unsigned int vdd)
-{
-        struct pxamci_platform_data* p_d = dev->platform_data;
-
-        if (( 1 << vdd) & p_d->ocr_mask) {
-                pr_debug("%s: on\n", __func__);
-                /* FIXME fill in values here */
-        } else {
-                pr_debug("%s: off\n", __func__);
-                /* FIXME fill in values here */
-        }
-}
-
-static short trizeps_conxs_ircr;
-
-/* Switch modes and Power for IRDA receiver */
-static void board_irda_mode(struct device *dev, int mode)
-{
-        unsigned long flags;
-
-        local_irq_save(flags);
-        if (mode & IR_SIRMODE) {
-                /* Slow mode */
-                trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
-        } else if (mode & IR_FIRMODE) {
-                /* Fast mode */
-                trizeps_conxs_ircr |= ConXS_IRCR_MODE;
-        }
-        pxa2xx_transceiver_mode(dev, mode);
-        if (mode & IR_OFF) {
-                trizeps_conxs_ircr |= ConXS_IRCR_SD;
-        } else {
-                trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-        }
-        /* FIXME write values to register */
-        local_irq_restore(flags);
+        pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
+                        trizeps_conxs_bcr);
+        BCR_writew(trizeps_conxs_bcr);
 }
 
-#else
-/* for other baseboards define dummies */
-void board_pcmcia_power(int power)      {;}
-#define board_backlight_power           NULL
-#define board_mci_power                 NULL
-#define board_irda_mode                 NULL
-
-#endif          /* CONFIG_MACH_TRIZEPS4_CONXS */
-EXPORT_SYMBOL(board_pcmcia_power);
+/* a I2C based RTC is known on CONXS board */
+static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
+        { I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
+};
 
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data)
+/****************************************************************************
+ * MMC card slot external to module
+ ****************************************************************************/
+static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+                void *data)
 {
         int err;
-        /* setup GPIO for PXA27x MMC controller */
-        pxa_gpio_mode(GPIO32_MMCCLK_MD);
-        pxa_gpio_mode(GPIO112_MMCCMD_MD);
-        pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-        pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-        pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-        pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-        pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 
         err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-                          IRQF_DISABLED | IRQF_TRIGGER_RISING,
-                          "MMC card detect", data);
-        if (err)
-                printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-        return err;
+                IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
+                "MMC card detect", data);
+        if (err) {
+                printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
+                                                "MMC card detect IRQ\n");
+                return -1;
+        }
+        return 0;
 }
 
 static void trizeps4_mci_exit(struct device *dev, void *data)
@@ -303,39 +365,69 @@ static void trizeps4_mci_exit(struct device *dev, void *data)
 
 static struct pxamci_platform_data trizeps4_mci_platform_data = {
         .ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
+        .detect_delay   = 1,
         .init           = trizeps4_mci_init,
         .exit           = trizeps4_mci_exit,
-        .setpower       = board_mci_power,
+        .get_ro         = NULL, /* write-protection not supported */
+        .setpower       = NULL, /* power-switching not supported */
 };
 
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-        .transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-        .transceiver_mode = board_irda_mode,
-};
+/****************************************************************************
+ * IRDA mode switching on stuart
+ ****************************************************************************/
+#ifndef STATUS_LEDS_ON_STUART_PINS
+static short trizeps_conxs_ircr;
 
-static int trizeps4_ohci_init(struct device *dev)
+static int trizeps4_irda_startup(struct device *dev)
 {
-        /* setup Port1 GPIO pin. */
-        pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);  /* USBHPWR1 */
-        pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT); /* USBHPEN1 */
-
-        /* Set the Power Control Polarity Low and Power Sense
-           Polarity Low to active low. */
-        UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-                ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
+        trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+        IRCR_writew(trizeps_conxs_ircr);
         return 0;
 }
 
-static void trizeps4_ohci_exit(struct device *dev)
+static void trizeps4_irda_shutdown(struct device *dev)
+{
+        trizeps_conxs_ircr |= ConXS_IRCR_SD;
+        IRCR_writew(trizeps_conxs_ircr);
+}
+
+static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 {
-        ;
+        unsigned long flags;
+
+        local_irq_save(flags);
+        /* Switch mode */
+        if (mode & IR_SIRMODE)
+                trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */
+        else if (mode & IR_FIRMODE) {
+                trizeps_conxs_ircr |= ConXS_IRCR_MODE;  /* Fast mode */
+
+        /* Switch power */
+        if (mode & IR_OFF)
+                trizeps_conxs_ircr |= ConXS_IRCR_SD;
+        else
+                trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+
+        IRCR_writew(trizeps_conxs_ircr);
+        local_irq_restore(flags);
+
+        pxa2xx_transceiver_mode(dev, mode);
 }
 
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+        .transceiver_cap        = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+        .transceiver_mode       = trizeps4_irda_transceiver_mode,
+        .startup                = trizeps4_irda_startup,
+        .shutdown               = trizeps4_irda_shutdown,
+};
+#endif
+
+/****************************************************************************
+ * OHCI USB port
+ ****************************************************************************/
 static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
         .port_mode      = PMM_PERPORT_MODE,
-        .init           = trizeps4_ohci_init,
-        .exit           = trizeps4_ohci_exit,
+        .flags          = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 static struct map_desc trizeps4_io_desc[] __initdata = {
@@ -372,105 +464,80 @@ static struct map_desc trizeps4_io_desc[] __initdata = {
 };
 
 static struct pxafb_mode_info sharp_lcd_mode = {
-    .pixclock           = 78000,
-    .xres               = 640,
-    .yres               = 480,
-    .bpp                = 8,
-    .hsync_len          = 4,
-    .left_margin        = 4,
-    .right_margin       = 4,
-    .vsync_len          = 2,
-    .upper_margin       = 0,
-    .lower_margin       = 0,
-    .sync               = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-    .cmap_greyscale     = 0,
+        .pixclock       = 78000,
+        .xres           = 640,
+        .yres           = 480,
+        .bpp            = 8,
+        .hsync_len      = 4,
+        .left_margin    = 4,
+        .right_margin   = 4,
+        .vsync_len      = 2,
+        .upper_margin   = 0,
+        .lower_margin   = 0,
+        .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+        .cmap_greyscale = 0,
 };
 
 static struct pxafb_mach_info sharp_lcd = {
-    .modes              = &sharp_lcd_mode,
-    .num_modes  = 1,
-    .cmap_inverse       = 0,
-    .cmap_static        = 0,
-    .lccr0              = LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
-    .lccr3              = 0x0340ff02,
-    .pxafb_backlight_power = board_backlight_power,
+        .modes          = &sharp_lcd_mode,
+        .num_modes      = 1,
+        .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
+        .cmap_inverse   = 0,
+        .cmap_static    = 0,
+        .pxafb_backlight_power = board_backlight_power,
 };
 
 static struct pxafb_mode_info toshiba_lcd_mode = {
-    .pixclock           = 39720,
-    .xres               = 640,
-    .yres               = 480,
-    .bpp                = 8,
-    .hsync_len          = 63,
-    .left_margin        = 12,
-    .right_margin       = 12,
-    .vsync_len          = 4,
-    .upper_margin       = 32,
-    .lower_margin       = 10,
-    .sync               = 0,
-    .cmap_greyscale     = 0,
+        .pixclock       = 39720,
+        .xres           = 640,
+        .yres           = 480,
+        .bpp            = 8,
+        .hsync_len      = 63,
+        .left_margin    = 12,
+        .right_margin   = 12,
+        .vsync_len      = 4,
+        .upper_margin   = 32,
+        .lower_margin   = 10,
+        .sync           = 0,
+        .cmap_greyscale = 0,
 };
 
 static struct pxafb_mach_info toshiba_lcd = {
-    .modes              = &toshiba_lcd_mode,
-    .num_modes  = 1,
-    .cmap_inverse       = 0,
-    .cmap_static        = 0,
-    .lccr0              = LCCR0_Color | LCCR0_Act,
-    .lccr3              = 0x03400002,
-    .pxafb_backlight_power = board_backlight_power,
+        .modes          = &toshiba_lcd_mode,
+        .num_modes      = 1,
+        .lcd_conn       = (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
+        .cmap_inverse   = 0,
+        .cmap_static    = 0,
+        .pxafb_backlight_power = board_backlight_power,
 };
 
 static void __init trizeps4_init(void)
 {
-        platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+        pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
+        if (machine_is_trizeps4wl()) {
+                pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
+                platform_add_devices(trizeps4wl_devices,
+                                        ARRAY_SIZE(trizeps4wl_devices));
+        } else {
+                platform_add_devices(trizeps4_devices,
+                                        ARRAY_SIZE(trizeps4_devices));
+        }
 
-/*      set_pxa_fb_info(&sharp_lcd); */
-        set_pxa_fb_info(&toshiba_lcd);
+        if (0)  /* dont know how to determine LCD */
+                set_pxa_fb_info(&sharp_lcd);
+        else
+                set_pxa_fb_info(&toshiba_lcd);
 
         pxa_set_mci_info(&trizeps4_mci_platform_data);
+#ifndef STATUS_LEDS_ON_STUART_PINS
         pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+#endif
         pxa_set_ohci_info(&trizeps4_ohci_platform_data);
         pxa_set_ac97_info(NULL);
-}
-
-static void __init trizeps4_map_io(void)
-{
-        pxa_map_io();
-        iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
-
-        /* for DiskOnChip */
-        pxa_gpio_mode(GPIO15_nCS_1_MD);
-
-        /* for off-module PIC on ConXS board */
-        pxa_gpio_mode(GPIO_PIC | GPIO_IN);
-
-        /* UCB1400 irq */
-        pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
-
-        /* for DM9000 LAN */
-        pxa_gpio_mode(GPIO78_nCS_2_MD);
-        pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-
-        /* for PCMCIA device */
-        pxa_gpio_mode(GPIO_PCD | GPIO_IN);
-        pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
-
-        /* for I2C adapter */
-        pxa_gpio_mode(GPIO117_I2CSCL_MD);
-        pxa_gpio_mode(GPIO118_I2CSDA_MD);
+        pxa_set_i2c_info(NULL);
+        i2c_register_board_info(0, trizeps4_i2c_devices,
+                                        ARRAY_SIZE(trizeps4_i2c_devices));
 
-        /* MMC_DET s.o. */
-        pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
-
-        /* whats that for ??? */
-        pxa_gpio_mode(GPIO79_nCS_3_MD);
-
-#ifdef CONFIG_LEDS
-        pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);          /* LED1 */
-        pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);          /* LED2 */
-#endif
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 #ifdef CONFIG_IDE_PXA_CF
         /* if boot direct from compact flash dont disable power */
         trizeps_conxs_bcr = 0x0009;
@@ -478,18 +545,24 @@ static void __init trizeps4_map_io(void)
         /* this is the reset value */
         trizeps_conxs_bcr = 0x00A0;
 #endif
-        ConXS_BCR = trizeps_conxs_bcr;
-#endif
+        BCR_writew(trizeps_conxs_bcr);
+        board_backlight_power(1);
+}
+
+static void __init trizeps4_map_io(void)
+{
+        pxa_map_io();
+        iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
 
-#warning FIXME - accessing PM registers directly is deprecated
-        PWER  = 0x00000002;
-        PFER  = 0x00000000;
-        PRER  = 0x00000002;
-        PGSR0 = 0x0158C000;
-        PGSR1 = 0x00FF0080;
-        PGSR2 = 0x0001C004;
-        /* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-        PCFR |= PCFR_OPDE;
+        if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+                /* if flash is 16 bit wide its a Trizeps4 WL */
+                __machine_arch_type = MACH_TYPE_TRIZEPS4WL;
+                trizeps4_flash_data[0].width = 2;
+        } else {
+                /* if flash is 32 bit wide its a Trizeps4 */
+                __machine_arch_type = MACH_TYPE_TRIZEPS4;
+                trizeps4_flash_data[0].width = 4;
+        }
 }
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
@@ -503,3 +576,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
         .timer          = &pxa_timer,
 MACHINE_END
 
+MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
+        /* MAINTAINER("Jürgen Schindele") */
+        .phys_io        = 0x40000000,
+        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+        .boot_params    = TRIZEPS4_SDRAM_BASE + 0x100,
+        .init_machine   = trizeps4_init,
+        .map_io         = trizeps4_map_io,
+        .init_irq       = pxa27x_init_irq,
+        .timer          = &pxa_timer,
+MACHINE_END