1 files changed, 115 insertions, 28 deletions

diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 01f18a421b17..6ed41ec2bbf5 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -19,17 +19,22 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/list.h>
 #include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 
+#include <asm/exception.h>
 #include <asm/mach/irq.h>
 #include <asm/hardware/vic.h>
 
-#ifdef CONFIG_PM
 /**
  * struct vic_device - VIC PM device
  * @irq: The IRQ number for the base of the VIC.
@@ -40,6 +45,7 @@
  * @int_enable: Save for VIC_INT_ENABLE.
  * @soft_int: Save for VIC_INT_SOFT.
  * @protect: Save for VIC_PROTECT.
+ * @domain: The IRQ domain for the VIC.
  */
 struct vic_device {
         void __iomem    *base;
@@ -50,13 +56,13 @@ struct vic_device {
         u32             int_enable;
         u32             soft_int;
         u32             protect;
+        struct irq_domain domain;
 };
 
 /* we cannot allocate memory when VICs are initially registered */
 static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
-#endif /* CONFIG_PM */
 
 /**
  * vic_init2 - common initialisation code
@@ -156,39 +162,50 @@ static int __init vic_pm_init(void)
         return 0;
 }
 late_initcall(vic_pm_init);
+#endif /* CONFIG_PM */
 
 /**
- * vic_pm_register - Register a VIC for later power management control
+ * vic_register() - Register a VIC.
  * @base: The base address of the VIC.
  * @irq: The base IRQ for the VIC.
  * @resume_sources: bitmask of interrupts allowed for resume sources.
+ * @node: The device tree node associated with the VIC.
  *
  * Register the VIC with the system device tree so that it can be notified
  * of suspend and resume requests and ensure that the correct actions are
  * taken to re-instate the settings on resume.
+ *
+ * This also configures the IRQ domain for the VIC.
  */
-static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+static void __init vic_register(void __iomem *base, unsigned int irq,
+                                u32 resume_sources, struct device_node *node)
 {
         struct vic_device *v;
 
-        if (vic_id >= ARRAY_SIZE(vic_devices))
+        if (vic_id >= ARRAY_SIZE(vic_devices)) {
                 printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
-        else {
-                v = &vic_devices[vic_id];
-                v->base = base;
-                v->resume_sources = resume_sources;
-                v->irq = irq;
-                vic_id++;
+                return;
         }
+
+        v = &vic_devices[vic_id];
+        v->base = base;
+        v->resume_sources = resume_sources;
+        v->irq = irq;
+        vic_id++;
+
+        v->domain.irq_base = irq;
+        v->domain.nr_irq = 32;
+#ifdef CONFIG_OF_IRQ
+        v->domain.of_node = of_node_get(node);
+        v->domain.ops = &irq_domain_simple_ops;
+#endif /* CONFIG_OF */
+        irq_domain_add(&v->domain);
 }
-#else
-static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
-#endif /* CONFIG_PM */
 
 static void vic_ack_irq(struct irq_data *d)
 {
         void __iomem *base = irq_data_get_irq_chip_data(d);
-        unsigned int irq = d->irq & 31;
+        unsigned int irq = d->hwirq;
         writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
         /* moreover, clear the soft-triggered, in case it was the reason */
         writel(1 << irq, base + VIC_INT_SOFT_CLEAR);
@@ -197,14 +214,14 @@ static void vic_ack_irq(struct irq_data *d)
 static void vic_mask_irq(struct irq_data *d)
 {
         void __iomem *base = irq_data_get_irq_chip_data(d);
-        unsigned int irq = d->irq & 31;
+        unsigned int irq = d->hwirq;
         writel(1 << irq, base + VIC_INT_ENABLE_CLEAR);
 }
 
 static void vic_unmask_irq(struct irq_data *d)
 {
         void __iomem *base = irq_data_get_irq_chip_data(d);
-        unsigned int irq = d->irq & 31;
+        unsigned int irq = d->hwirq;
         writel(1 << irq, base + VIC_INT_ENABLE);
 }
 
@@ -226,7 +243,7 @@ static struct vic_device *vic_from_irq(unsigned int irq)
 static int vic_set_wake(struct irq_data *d, unsigned int on)
 {
         struct vic_device *v = vic_from_irq(d->irq);
-        unsigned int off = d->irq & 31;
+        unsigned int off = d->hwirq;
         u32 bit = 1 << off;
 
         if (!v)
@@ -330,15 +347,9 @@ static void __init vic_init_st(void __iomem *base, unsigned int irq_start,
         vic_set_irq_sources(base, irq_start, vic_sources);
 }
 
-/**
- * vic_init - initialise a vectored interrupt controller
- * @base: iomem base address
- * @irq_start: starting interrupt number, must be muliple of 32
- * @vic_sources: bitmask of interrupt sources to allow
- * @resume_sources: bitmask of interrupt sources to allow for resume
- */
-void __init vic_init(void __iomem *base, unsigned int irq_start,
-                     u32 vic_sources, u32 resume_sources)
+static void __init __vic_init(void __iomem *base, unsigned int irq_start,
+                              u32 vic_sources, u32 resume_sources,
+                              struct device_node *node)
 {
         unsigned int i;
         u32 cellid = 0;
@@ -375,5 +386,81 @@ void __init vic_init(void __iomem *base, unsigned int irq_start,
 
         vic_set_irq_sources(base, irq_start, vic_sources);
 
-        vic_pm_register(base, irq_start, resume_sources);
+        vic_register(base, irq_start, resume_sources, node);
+}
+
+/**
+ * vic_init() - initialise a vectored interrupt controller
+ * @base: iomem base address
+ * @irq_start: starting interrupt number, must be muliple of 32
+ * @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
+ */
+void __init vic_init(void __iomem *base, unsigned int irq_start,
+                     u32 vic_sources, u32 resume_sources)
+{
+        __vic_init(base, irq_start, vic_sources, resume_sources, NULL);
+}
+
+#ifdef CONFIG_OF
+int __init vic_of_init(struct device_node *node, struct device_node *parent)
+{
+        void __iomem *regs;
+        int irq_base;
+
+        if (WARN(parent, "non-root VICs are not supported"))
+                return -EINVAL;
+
+        regs = of_iomap(node, 0);
+        if (WARN_ON(!regs))
+                return -EIO;
+
+        irq_base = irq_alloc_descs(-1, 0, 32, numa_node_id());
+        if (WARN_ON(irq_base < 0))
+                goto out_unmap;
+
+        __vic_init(regs, irq_base, ~0, ~0, node);
+
+        return 0;
+
+ out_unmap:
+        iounmap(regs);
+
+        return -EIO;
+}
+#endif /* CONFIG OF */
+
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This does a single read of the
+ * status register and handles all interrupts in order from LSB first.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+        u32 stat, irq;
+        int handled = 0;
+
+        stat = readl_relaxed(vic->base + VIC_IRQ_STATUS);
+        while (stat) {
+                irq = ffs(stat) - 1;
+                handle_IRQ(irq_domain_to_irq(&vic->domain, irq), regs);
+                stat &= ~(1 << irq);
+                handled = 1;
+        }
+
+        return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+        int i, handled;
+
+        do {
+                for (i = 0, handled = 0; i < vic_id; ++i)
+                        handled |= handle_one_vic(&vic_devices[i], regs);
+        } while (handled);
 }