[ARM] S3C: Move i2c headers to arch/arm/plat-s3c/include/plat.

Move the i2c headers to arch/arm/plat-s3c/include/plat
ready to clean out the old include directories.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

2 files changed, 0 insertions, 89 deletions

diff --git a/include/asm-arm/plat-s3c/iic.h b/include/asm-arm/plat-s3c/iic.h
deleted file mode 100644
index 5106acaa1d0e..000000000000
--- a/include/asm-arm/plat-s3c/iic.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/iic.h
- *
- * Copyright (c) 2004 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - I2C Controller platfrom_device info
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IIC_H
-#define __ASM_ARCH_IIC_H __FILE__
-
-#define S3C_IICFLG_FILTER       (1<<0)  /* enable s3c2440 filter */
-
-/* Notes:
- *      1) All frequencies are expressed in Hz
- *      2) A value of zero is `do not care`
-*/
-
-struct s3c2410_platform_i2c {
-        int             bus_num;        /* bus number to use */
-        unsigned int    flags;
-        unsigned int    slave_addr;     /* slave address for controller */
-        unsigned long   bus_freq;       /* standard bus frequency */
-        unsigned long   max_freq;       /* max frequency for the bus */
-        unsigned long   min_freq;       /* min frequency for the bus */
-        unsigned int    sda_delay;      /* pclks (s3c2440 only) */
-};
-
-#endif /* __ASM_ARCH_IIC_H */
diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/include/asm-arm/plat-s3c/regs-iic.h
deleted file mode 100644
index 2f7c17de8ac8..000000000000
--- a/include/asm-arm/plat-s3c/regs-iic.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-iic.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *              http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 I2C Controller
-*/
-
-#ifndef __ASM_ARCH_REGS_IIC_H
-#define __ASM_ARCH_REGS_IIC_H __FILE__
-
-/* see s3c2410x user guide, v1.1, section 9 (p447) for more info */
-
-#define S3C2410_IICREG(x) (x)
-
-#define S3C2410_IICCON    S3C2410_IICREG(0x00)
-#define S3C2410_IICSTAT   S3C2410_IICREG(0x04)
-#define S3C2410_IICADD    S3C2410_IICREG(0x08)
-#define S3C2410_IICDS     S3C2410_IICREG(0x0C)
-#define S3C2440_IICLC     S3C2410_IICREG(0x10)
-
-#define S3C2410_IICCON_ACKEN            (1<<7)
-#define S3C2410_IICCON_TXDIV_16         (0<<6)
-#define S3C2410_IICCON_TXDIV_512        (1<<6)
-#define S3C2410_IICCON_IRQEN            (1<<5)
-#define S3C2410_IICCON_IRQPEND          (1<<4)
-#define S3C2410_IICCON_SCALE(x)         ((x)&15)
-#define S3C2410_IICCON_SCALEMASK        (0xf)
-
-#define S3C2410_IICSTAT_MASTER_RX       (2<<6)
-#define S3C2410_IICSTAT_MASTER_TX       (3<<6)
-#define S3C2410_IICSTAT_SLAVE_RX        (0<<6)
-#define S3C2410_IICSTAT_SLAVE_TX        (1<<6)
-#define S3C2410_IICSTAT_MODEMASK        (3<<6)
-
-#define S3C2410_IICSTAT_START           (1<<5)
-#define S3C2410_IICSTAT_BUSBUSY         (1<<5)
-#define S3C2410_IICSTAT_TXRXEN          (1<<4)
-#define S3C2410_IICSTAT_ARBITR          (1<<3)
-#define S3C2410_IICSTAT_ASSLAVE         (1<<2)
-#define S3C2410_IICSTAT_ADDR0           (1<<1)
-#define S3C2410_IICSTAT_LASTBIT         (1<<0)
-
-#define S3C2410_IICLC_SDA_DELAY0        (0 << 0)
-#define S3C2410_IICLC_SDA_DELAY5        (1 << 0)
-#define S3C2410_IICLC_SDA_DELAY10       (2 << 0)
-#define S3C2410_IICLC_SDA_DELAY15       (3 << 0)
-#define S3C2410_IICLC_SDA_DELAY_MASK    (3 << 0)
-
-#define S3C2410_IICLC_FILTER_ON         (1<<2)
-
-#endif /* __ASM_ARCH_REGS_IIC_H */