diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-03-04 11:24:06 -0500 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-03-04 11:24:06 -0500 |
commit | 4c10c937cc2eb197db565392db91d429eec71176 (patch) | |
tree | 02d7f15b314441e832f48f0f882882042361396c /drivers | |
parent | 9bb676966aa85e56af00b353387d3c274a26e480 (diff) | |
parent | 950f564b707ca1b1c5bb94cd1e7d2a0702bfcadc (diff) |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6: (49 commits)
drivers/ide: Fix continuation line formats
ide: fixed section mismatch warning in cmd640.c
ide: ide_timing_compute() fixup
ide: make ide_get_best_pio_mode() static
via82cxxx: use ->pio_mode value to determine pair device speed
tx493xide: use ->pio_mode value to determine pair device speed
siimage: use ->pio_mode value to determine pair device speed
palm_bk3710: use ->pio_mode value to determine pair device speed
it821x: use ->pio_mode value to determine pair device speed
cs5536: use ->pio_mode value to determine pair device speed
cs5535: use ->pio_mode value to determine pair device speed
cmd64x: fix handling of address setup timings
amd74xx: use ->pio_mode value to determine pair device speed
alim15x3: fix handling of UDMA enable bit
alim15x3: fix handling of DMA timings
alim15x3: fix handling of command timings
alim15x3: fix handling of address setup timings
ide-timings: use ->pio_mode value to determine fastest PIO speed
ide: change ->set_dma_mode method parameters
ide: change ->set_pio_mode method parameters
...
Diffstat (limited to 'drivers')
50 files changed, 611 insertions, 638 deletions
diff --git a/drivers/ide/aec62xx.c b/drivers/ide/aec62xx.c index 878f8ec6dbe1..57d00caefc86 100644 --- a/drivers/ide/aec62xx.c +++ b/drivers/ide/aec62xx.c | |||
@@ -81,15 +81,15 @@ static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entr | |||
81 | return chipset_table->ultra_settings; | 81 | return chipset_table->ultra_settings; |
82 | } | 82 | } |
83 | 83 | ||
84 | static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) | 84 | static void aec6210_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
85 | { | 85 | { |
86 | ide_hwif_t *hwif = drive->hwif; | ||
87 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 86 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
88 | struct ide_host *host = pci_get_drvdata(dev); | 87 | struct ide_host *host = pci_get_drvdata(dev); |
89 | struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; | 88 | struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; |
90 | u16 d_conf = 0; | 89 | u16 d_conf = 0; |
91 | u8 ultra = 0, ultra_conf = 0; | 90 | u8 ultra = 0, ultra_conf = 0; |
92 | u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; | 91 | u8 tmp0 = 0, tmp1 = 0, tmp2 = 0; |
92 | const u8 speed = drive->dma_mode; | ||
93 | unsigned long flags; | 93 | unsigned long flags; |
94 | 94 | ||
95 | local_irq_save(flags); | 95 | local_irq_save(flags); |
@@ -109,15 +109,15 @@ static void aec6210_set_mode(ide_drive_t *drive, const u8 speed) | |||
109 | local_irq_restore(flags); | 109 | local_irq_restore(flags); |
110 | } | 110 | } |
111 | 111 | ||
112 | static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) | 112 | static void aec6260_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
113 | { | 113 | { |
114 | ide_hwif_t *hwif = drive->hwif; | ||
115 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 114 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
116 | struct ide_host *host = pci_get_drvdata(dev); | 115 | struct ide_host *host = pci_get_drvdata(dev); |
117 | struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; | 116 | struct chipset_bus_clock_list_entry *bus_clock = host->host_priv; |
118 | u8 unit = drive->dn & 1; | 117 | u8 unit = drive->dn & 1; |
119 | u8 tmp1 = 0, tmp2 = 0; | 118 | u8 tmp1 = 0, tmp2 = 0; |
120 | u8 ultra = 0, drive_conf = 0, ultra_conf = 0; | 119 | u8 ultra = 0, drive_conf = 0, ultra_conf = 0; |
120 | const u8 speed = drive->dma_mode; | ||
121 | unsigned long flags; | 121 | unsigned long flags; |
122 | 122 | ||
123 | local_irq_save(flags); | 123 | local_irq_save(flags); |
@@ -134,9 +134,10 @@ static void aec6260_set_mode(ide_drive_t *drive, const u8 speed) | |||
134 | local_irq_restore(flags); | 134 | local_irq_restore(flags); |
135 | } | 135 | } |
136 | 136 | ||
137 | static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio) | 137 | static void aec_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
138 | { | 138 | { |
139 | drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0); | 139 | drive->dma_mode = drive->pio_mode; |
140 | hwif->port_ops->set_dma_mode(hwif, drive); | ||
140 | } | 141 | } |
141 | 142 | ||
142 | static int init_chipset_aec62xx(struct pci_dev *dev) | 143 | static int init_chipset_aec62xx(struct pci_dev *dev) |
diff --git a/drivers/ide/ali14xx.c b/drivers/ide/ali14xx.c index 90da1f953ed0..25b9fe3a9f8e 100644 --- a/drivers/ide/ali14xx.c +++ b/drivers/ide/ali14xx.c | |||
@@ -109,13 +109,14 @@ static DEFINE_SPINLOCK(ali14xx_lock); | |||
109 | * This function computes timing parameters | 109 | * This function computes timing parameters |
110 | * and sets controller registers accordingly. | 110 | * and sets controller registers accordingly. |
111 | */ | 111 | */ |
112 | static void ali14xx_set_pio_mode(ide_drive_t *drive, const u8 pio) | 112 | static void ali14xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
113 | { | 113 | { |
114 | int driveNum; | 114 | int driveNum; |
115 | int time1, time2; | 115 | int time1, time2; |
116 | u8 param1, param2, param3, param4; | 116 | u8 param1, param2, param3, param4; |
117 | unsigned long flags; | 117 | unsigned long flags; |
118 | int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; | 118 | int bus_speed = ide_vlb_clk ? ide_vlb_clk : 50; |
119 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
119 | struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); | 120 | struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); |
120 | 121 | ||
121 | /* calculate timing, according to PIO mode */ | 122 | /* calculate timing, according to PIO mode */ |
diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c index 0abc43f3101e..2c8016ad0e26 100644 --- a/drivers/ide/alim15x3.c +++ b/drivers/ide/alim15x3.c | |||
@@ -8,7 +8,7 @@ | |||
8 | * Copyright (C) 2002 Alan Cox | 8 | * Copyright (C) 2002 Alan Cox |
9 | * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> | 9 | * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw> |
10 | * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> | 10 | * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com> |
11 | * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> | 11 | * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz |
12 | * | 12 | * |
13 | * (U)DMA capable version of ali 1533/1543(C), 1535(D) | 13 | * (U)DMA capable version of ali 1533/1543(C), 1535(D) |
14 | * | 14 | * |
@@ -48,61 +48,84 @@ static u8 m5229_revision; | |||
48 | static u8 chip_is_1543c_e; | 48 | static u8 chip_is_1543c_e; |
49 | static struct pci_dev *isa_dev; | 49 | static struct pci_dev *isa_dev; |
50 | 50 | ||
51 | static void ali_fifo_control(ide_hwif_t *hwif, ide_drive_t *drive, int on) | ||
52 | { | ||
53 | struct pci_dev *pdev = to_pci_dev(hwif->dev); | ||
54 | int pio_fifo = 0x54 + hwif->channel; | ||
55 | u8 fifo; | ||
56 | int shift = 4 * (drive->dn & 1); | ||
57 | |||
58 | pci_read_config_byte(pdev, pio_fifo, &fifo); | ||
59 | fifo &= ~(0x0F << shift); | ||
60 | fifo |= (on << shift); | ||
61 | pci_write_config_byte(pdev, pio_fifo, fifo); | ||
62 | } | ||
63 | |||
64 | static void ali_program_timings(ide_hwif_t *hwif, ide_drive_t *drive, | ||
65 | struct ide_timing *t, u8 ultra) | ||
66 | { | ||
67 | struct pci_dev *dev = to_pci_dev(hwif->dev); | ||
68 | int port = hwif->channel ? 0x5c : 0x58; | ||
69 | int udmat = 0x56 + hwif->channel; | ||
70 | u8 unit = drive->dn & 1, udma; | ||
71 | int shift = 4 * unit; | ||
72 | |||
73 | /* Set up the UDMA */ | ||
74 | pci_read_config_byte(dev, udmat, &udma); | ||
75 | udma &= ~(0x0F << shift); | ||
76 | udma |= ultra << shift; | ||
77 | pci_write_config_byte(dev, udmat, udma); | ||
78 | |||
79 | if (t == NULL) | ||
80 | return; | ||
81 | |||
82 | t->setup = clamp_val(t->setup, 1, 8) & 7; | ||
83 | t->act8b = clamp_val(t->act8b, 1, 8) & 7; | ||
84 | t->rec8b = clamp_val(t->rec8b, 1, 16) & 15; | ||
85 | t->active = clamp_val(t->active, 1, 8) & 7; | ||
86 | t->recover = clamp_val(t->recover, 1, 16) & 15; | ||
87 | |||
88 | pci_write_config_byte(dev, port, t->setup); | ||
89 | pci_write_config_byte(dev, port + 1, (t->act8b << 4) | t->rec8b); | ||
90 | pci_write_config_byte(dev, port + unit + 2, | ||
91 | (t->active << 4) | t->recover); | ||
92 | } | ||
93 | |||
51 | /** | 94 | /** |
52 | * ali_set_pio_mode - set host controller for PIO mode | 95 | * ali_set_pio_mode - set host controller for PIO mode |
96 | * @hwif: port | ||
53 | * @drive: drive | 97 | * @drive: drive |
54 | * @pio: PIO mode number | ||
55 | * | 98 | * |
56 | * Program the controller for the given PIO mode. | 99 | * Program the controller for the given PIO mode. |
57 | */ | 100 | */ |
58 | 101 | ||
59 | static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio) | 102 | static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
60 | { | 103 | { |
61 | ide_hwif_t *hwif = drive->hwif; | 104 | ide_drive_t *pair = ide_get_pair_dev(drive); |
62 | struct pci_dev *dev = to_pci_dev(hwif->dev); | ||
63 | struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); | ||
64 | int s_time = t->setup, a_time = t->active, c_time = t->cycle; | ||
65 | u8 s_clc, a_clc, r_clc; | ||
66 | unsigned long flags; | ||
67 | int bus_speed = ide_pci_clk ? ide_pci_clk : 33; | 105 | int bus_speed = ide_pci_clk ? ide_pci_clk : 33; |
68 | int port = hwif->channel ? 0x5c : 0x58; | 106 | unsigned long T = 1000000 / bus_speed; /* PCI clock based */ |
69 | int portFIFO = hwif->channel ? 0x55 : 0x54; | 107 | struct ide_timing t; |
70 | u8 cd_dma_fifo = 0, unit = drive->dn & 1; | 108 | |
71 | 109 | ide_timing_compute(drive, drive->pio_mode, &t, T, 1); | |
72 | if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8) | 110 | if (pair) { |
73 | s_clc = 0; | 111 | struct ide_timing p; |
74 | if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8) | 112 | |
75 | a_clc = 0; | 113 | ide_timing_compute(pair, pair->pio_mode, &p, T, 1); |
76 | 114 | ide_timing_merge(&p, &t, &t, | |
77 | if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) { | 115 | IDE_TIMING_SETUP | IDE_TIMING_8BIT); |
78 | r_clc = 1; | 116 | if (pair->dma_mode) { |
79 | } else { | 117 | ide_timing_compute(pair, pair->dma_mode, &p, T, 1); |
80 | if (r_clc >= 16) | 118 | ide_timing_merge(&p, &t, &t, |
81 | r_clc = 0; | 119 | IDE_TIMING_SETUP | IDE_TIMING_8BIT); |
120 | } | ||
82 | } | 121 | } |
83 | local_irq_save(flags); | 122 | |
84 | |||
85 | /* | 123 | /* |
86 | * PIO mode => ATA FIFO on, ATAPI FIFO off | 124 | * PIO mode => ATA FIFO on, ATAPI FIFO off |
87 | */ | 125 | */ |
88 | pci_read_config_byte(dev, portFIFO, &cd_dma_fifo); | 126 | ali_fifo_control(hwif, drive, (drive->media == ide_disk) ? 0x05 : 0x00); |
89 | if (drive->media==ide_disk) { | 127 | |
90 | if (unit) { | 128 | ali_program_timings(hwif, drive, &t, 0); |
91 | pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50); | ||
92 | } else { | ||
93 | pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05); | ||
94 | } | ||
95 | } else { | ||
96 | if (unit) { | ||
97 | pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F); | ||
98 | } else { | ||
99 | pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0); | ||
100 | } | ||
101 | } | ||
102 | |||
103 | pci_write_config_byte(dev, port, s_clc); | ||
104 | pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc); | ||
105 | local_irq_restore(flags); | ||
106 | } | 129 | } |
107 | 130 | ||
108 | /** | 131 | /** |
@@ -132,44 +155,42 @@ static u8 ali_udma_filter(ide_drive_t *drive) | |||
132 | 155 | ||
133 | /** | 156 | /** |
134 | * ali_set_dma_mode - set host controller for DMA mode | 157 | * ali_set_dma_mode - set host controller for DMA mode |
158 | * @hwif: port | ||
135 | * @drive: drive | 159 | * @drive: drive |
136 | * @speed: DMA mode | ||
137 | * | 160 | * |
138 | * Configure the hardware for the desired IDE transfer mode. | 161 | * Configure the hardware for the desired IDE transfer mode. |
139 | */ | 162 | */ |
140 | 163 | ||
141 | static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed) | 164 | static void ali_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
142 | { | 165 | { |
143 | ide_hwif_t *hwif = drive->hwif; | 166 | static u8 udma_timing[7] = { 0xC, 0xB, 0xA, 0x9, 0x8, 0xF, 0xD }; |
144 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 167 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
145 | u8 speed1 = speed; | 168 | ide_drive_t *pair = ide_get_pair_dev(drive); |
146 | u8 unit = drive->dn & 1; | 169 | int bus_speed = ide_pci_clk ? ide_pci_clk : 33; |
170 | unsigned long T = 1000000 / bus_speed; /* PCI clock based */ | ||
171 | const u8 speed = drive->dma_mode; | ||
147 | u8 tmpbyte = 0x00; | 172 | u8 tmpbyte = 0x00; |
148 | int m5229_udma = (hwif->channel) ? 0x57 : 0x56; | 173 | struct ide_timing t; |
149 | |||
150 | if (speed == XFER_UDMA_6) | ||
151 | speed1 = 0x47; | ||
152 | 174 | ||
153 | if (speed < XFER_UDMA_0) { | 175 | if (speed < XFER_UDMA_0) { |
154 | u8 ultra_enable = (unit) ? 0x7f : 0xf7; | 176 | ide_timing_compute(drive, drive->dma_mode, &t, T, 1); |
155 | /* | 177 | if (pair) { |
156 | * clear "ultra enable" bit | 178 | struct ide_timing p; |
157 | */ | 179 | |
158 | pci_read_config_byte(dev, m5229_udma, &tmpbyte); | 180 | ide_timing_compute(pair, pair->pio_mode, &p, T, 1); |
159 | tmpbyte &= ultra_enable; | 181 | ide_timing_merge(&p, &t, &t, |
160 | pci_write_config_byte(dev, m5229_udma, tmpbyte); | 182 | IDE_TIMING_SETUP | IDE_TIMING_8BIT); |
161 | 183 | if (pair->dma_mode) { | |
162 | /* | 184 | ide_timing_compute(pair, pair->dma_mode, |
163 | * FIXME: Oh, my... DMA timings are never set. | 185 | &p, T, 1); |
164 | */ | 186 | ide_timing_merge(&p, &t, &t, |
187 | IDE_TIMING_SETUP | IDE_TIMING_8BIT); | ||
188 | } | ||
189 | } | ||
190 | ali_program_timings(hwif, drive, &t, 0); | ||
165 | } else { | 191 | } else { |
166 | pci_read_config_byte(dev, m5229_udma, &tmpbyte); | 192 | ali_program_timings(hwif, drive, NULL, |
167 | tmpbyte &= (0x0f << ((1-unit) << 2)); | 193 | udma_timing[speed - XFER_UDMA_0]); |
168 | /* | ||
169 | * enable ultra dma and set timing | ||
170 | */ | ||
171 | tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2)); | ||
172 | pci_write_config_byte(dev, m5229_udma, tmpbyte); | ||
173 | if (speed >= XFER_UDMA_3) { | 194 | if (speed >= XFER_UDMA_3) { |
174 | pci_read_config_byte(dev, 0x4b, &tmpbyte); | 195 | pci_read_config_byte(dev, 0x4b, &tmpbyte); |
175 | tmpbyte |= 1; | 196 | tmpbyte |= 1; |
@@ -355,19 +376,13 @@ static int ali_cable_override(struct pci_dev *pdev) | |||
355 | * | 376 | * |
356 | * This checks if the controller and the cable are capable | 377 | * This checks if the controller and the cable are capable |
357 | * of UDMA66 transfers. It doesn't check the drives. | 378 | * of UDMA66 transfers. It doesn't check the drives. |
358 | * But see note 2 below! | ||
359 | * | ||
360 | * FIXME: frobs bits that are not defined on newer ALi devicea | ||
361 | */ | 379 | */ |
362 | 380 | ||
363 | static u8 ali_cable_detect(ide_hwif_t *hwif) | 381 | static u8 ali_cable_detect(ide_hwif_t *hwif) |
364 | { | 382 | { |
365 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 383 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
366 | unsigned long flags; | ||
367 | u8 cbl = ATA_CBL_PATA40, tmpbyte; | 384 | u8 cbl = ATA_CBL_PATA40, tmpbyte; |
368 | 385 | ||
369 | local_irq_save(flags); | ||
370 | |||
371 | if (m5229_revision >= 0xC2) { | 386 | if (m5229_revision >= 0xC2) { |
372 | /* | 387 | /* |
373 | * m5229 80-pin cable detection (from Host View) | 388 | * m5229 80-pin cable detection (from Host View) |
@@ -387,8 +402,6 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) | |||
387 | } | 402 | } |
388 | } | 403 | } |
389 | 404 | ||
390 | local_irq_restore(flags); | ||
391 | |||
392 | return cbl; | 405 | return cbl; |
393 | } | 406 | } |
394 | 407 | ||
@@ -584,6 +597,6 @@ static void __exit ali15x3_ide_exit(void) | |||
584 | module_init(ali15x3_ide_init); | 597 | module_init(ali15x3_ide_init); |
585 | module_exit(ali15x3_ide_exit); | 598 | module_exit(ali15x3_ide_exit); |
586 | 599 | ||
587 | MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox"); | 600 | MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox, Bartlomiej Zolnierkiewicz"); |
588 | MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); | 601 | MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE"); |
589 | MODULE_LICENSE("GPL"); | 602 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c index 628cd2e5fed8..3747b2561f09 100644 --- a/drivers/ide/amd74xx.c +++ b/drivers/ide/amd74xx.c | |||
@@ -3,7 +3,7 @@ | |||
3 | * IDE driver for Linux. | 3 | * IDE driver for Linux. |
4 | * | 4 | * |
5 | * Copyright (c) 2000-2002 Vojtech Pavlik | 5 | * Copyright (c) 2000-2002 Vojtech Pavlik |
6 | * Copyright (c) 2007-2008 Bartlomiej Zolnierkiewicz | 6 | * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz |
7 | * | 7 | * |
8 | * Based on the work of: | 8 | * Based on the work of: |
9 | * Andre Hedrick | 9 | * Andre Hedrick |
@@ -70,7 +70,8 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, | |||
70 | default: return; | 70 | default: return; |
71 | } | 71 | } |
72 | 72 | ||
73 | pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t); | 73 | if (timing->udma) |
74 | pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + 3 - dn, t); | ||
74 | } | 75 | } |
75 | 76 | ||
76 | /* | 77 | /* |
@@ -78,14 +79,14 @@ static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask, | |||
78 | * to a desired transfer mode. It also can be called by upper layers. | 79 | * to a desired transfer mode. It also can be called by upper layers. |
79 | */ | 80 | */ |
80 | 81 | ||
81 | static void amd_set_drive(ide_drive_t *drive, const u8 speed) | 82 | static void amd_set_drive(ide_hwif_t *hwif, ide_drive_t *drive) |
82 | { | 83 | { |
83 | ide_hwif_t *hwif = drive->hwif; | ||
84 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 84 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
85 | ide_drive_t *peer = ide_get_pair_dev(drive); | 85 | ide_drive_t *peer = ide_get_pair_dev(drive); |
86 | struct ide_timing t, p; | 86 | struct ide_timing t, p; |
87 | int T, UT; | 87 | int T, UT; |
88 | u8 udma_mask = hwif->ultra_mask; | 88 | u8 udma_mask = hwif->ultra_mask; |
89 | const u8 speed = drive->dma_mode; | ||
89 | 90 | ||
90 | T = 1000000000 / amd_clock; | 91 | T = 1000000000 / amd_clock; |
91 | UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); | 92 | UT = (udma_mask == ATA_UDMA2) ? T : (T / 2); |
@@ -93,7 +94,7 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) | |||
93 | ide_timing_compute(drive, speed, &t, T, UT); | 94 | ide_timing_compute(drive, speed, &t, T, UT); |
94 | 95 | ||
95 | if (peer) { | 96 | if (peer) { |
96 | ide_timing_compute(peer, peer->current_speed, &p, T, UT); | 97 | ide_timing_compute(peer, peer->pio_mode, &p, T, UT); |
97 | ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); | 98 | ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); |
98 | } | 99 | } |
99 | 100 | ||
@@ -107,9 +108,10 @@ static void amd_set_drive(ide_drive_t *drive, const u8 speed) | |||
107 | * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. | 108 | * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning. |
108 | */ | 109 | */ |
109 | 110 | ||
110 | static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio) | 111 | static void amd_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
111 | { | 112 | { |
112 | amd_set_drive(drive, XFER_PIO_0 + pio); | 113 | drive->dma_mode = drive->pio_mode; |
114 | amd_set_drive(hwif, drive); | ||
113 | } | 115 | } |
114 | 116 | ||
115 | static void amd7409_cable_detect(struct pci_dev *dev) | 117 | static void amd7409_cable_detect(struct pci_dev *dev) |
@@ -340,6 +342,6 @@ static void __exit amd74xx_ide_exit(void) | |||
340 | module_init(amd74xx_ide_init); | 342 | module_init(amd74xx_ide_init); |
341 | module_exit(amd74xx_ide_exit); | 343 | module_exit(amd74xx_ide_exit); |
342 | 344 | ||
343 | MODULE_AUTHOR("Vojtech Pavlik"); | 345 | MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz"); |
344 | MODULE_DESCRIPTION("AMD PCI IDE driver"); | 346 | MODULE_DESCRIPTION("AMD PCI IDE driver"); |
345 | MODULE_LICENSE("GPL"); | 347 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index 248219a89a68..000a78e5246c 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c | |||
@@ -172,11 +172,12 @@ static void at91_ide_output_data(ide_drive_t *drive, struct ide_cmd *cmd, | |||
172 | leave_16bit(chipselect, mode); | 172 | leave_16bit(chipselect, mode); |
173 | } | 173 | } |
174 | 174 | ||
175 | static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) | 175 | static void at91_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
176 | { | 176 | { |
177 | struct ide_timing *timing; | 177 | struct ide_timing *timing; |
178 | u8 chipselect = drive->hwif->select_data; | 178 | u8 chipselect = hwif->select_data; |
179 | int use_iordy = 0; | 179 | int use_iordy = 0; |
180 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
180 | 181 | ||
181 | pdbg("chipselect %u pio %u\n", chipselect, pio); | 182 | pdbg("chipselect %u pio %u\n", chipselect, pio); |
182 | 183 | ||
diff --git a/drivers/ide/atiixp.c b/drivers/ide/atiixp.c index 837322b10a4c..15f0ead89f5c 100644 --- a/drivers/ide/atiixp.c +++ b/drivers/ide/atiixp.c | |||
@@ -42,19 +42,20 @@ static DEFINE_SPINLOCK(atiixp_lock); | |||
42 | 42 | ||
43 | /** | 43 | /** |
44 | * atiixp_set_pio_mode - set host controller for PIO mode | 44 | * atiixp_set_pio_mode - set host controller for PIO mode |
45 | * @hwif: port | ||
45 | * @drive: drive | 46 | * @drive: drive |
46 | * @pio: PIO mode number | ||
47 | * | 47 | * |
48 | * Set the interface PIO mode. | 48 | * Set the interface PIO mode. |
49 | */ | 49 | */ |
50 | 50 | ||
51 | static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) | 51 | static void atiixp_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
52 | { | 52 | { |
53 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); | 53 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
54 | unsigned long flags; | 54 | unsigned long flags; |
55 | int timing_shift = (drive->dn ^ 1) * 8; | 55 | int timing_shift = (drive->dn ^ 1) * 8; |
56 | u32 pio_timing_data; | 56 | u32 pio_timing_data; |
57 | u16 pio_mode_data; | 57 | u16 pio_mode_data; |
58 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
58 | 59 | ||
59 | spin_lock_irqsave(&atiixp_lock, flags); | 60 | spin_lock_irqsave(&atiixp_lock, flags); |
60 | 61 | ||
@@ -74,21 +75,22 @@ static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
74 | 75 | ||
75 | /** | 76 | /** |
76 | * atiixp_set_dma_mode - set host controller for DMA mode | 77 | * atiixp_set_dma_mode - set host controller for DMA mode |
78 | * @hwif: port | ||
77 | * @drive: drive | 79 | * @drive: drive |
78 | * @speed: DMA mode | ||
79 | * | 80 | * |
80 | * Set a ATIIXP host controller to the desired DMA mode. This involves | 81 | * Set a ATIIXP host controller to the desired DMA mode. This involves |
81 | * programming the right timing data into the PCI configuration space. | 82 | * programming the right timing data into the PCI configuration space. |
82 | */ | 83 | */ |
83 | 84 | ||
84 | static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed) | 85 | static void atiixp_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
85 | { | 86 | { |
86 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); | 87 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
87 | unsigned long flags; | 88 | unsigned long flags; |
88 | int timing_shift = (drive->dn ^ 1) * 8; | 89 | int timing_shift = (drive->dn ^ 1) * 8; |
89 | u32 tmp32; | 90 | u32 tmp32; |
90 | u16 tmp16; | 91 | u16 tmp16; |
91 | u16 udma_ctl = 0; | 92 | u16 udma_ctl = 0; |
93 | const u8 speed = drive->dma_mode; | ||
92 | 94 | ||
93 | spin_lock_irqsave(&atiixp_lock, flags); | 95 | spin_lock_irqsave(&atiixp_lock, flags); |
94 | 96 | ||
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 349a67bf1a36..b26c23416fa7 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c | |||
@@ -99,12 +99,11 @@ static void au1xxx_output_data(ide_drive_t *drive, struct ide_cmd *cmd, | |||
99 | } | 99 | } |
100 | #endif | 100 | #endif |
101 | 101 | ||
102 | static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) | 102 | static void au1xxx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
103 | { | 103 | { |
104 | int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); | 104 | int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); |
105 | 105 | ||
106 | /* set pio mode! */ | 106 | switch (drive->pio_mode - XFER_PIO_0) { |
107 | switch(pio) { | ||
108 | case 0: | 107 | case 0: |
109 | mem_sttime = SBC_IDE_TIMING(PIO0); | 108 | mem_sttime = SBC_IDE_TIMING(PIO0); |
110 | 109 | ||
@@ -161,11 +160,11 @@ static void au1xxx_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
161 | au_writel(mem_stcfg,MEM_STCFG2); | 160 | au_writel(mem_stcfg,MEM_STCFG2); |
162 | } | 161 | } |
163 | 162 | ||
164 | static void auide_set_dma_mode(ide_drive_t *drive, const u8 speed) | 163 | static void auide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
165 | { | 164 | { |
166 | int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); | 165 | int mem_sttime = 0, mem_stcfg = au_readl(MEM_STCFG2); |
167 | 166 | ||
168 | switch(speed) { | 167 | switch (drive->dma_mode) { |
169 | #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA | 168 | #ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA |
170 | case XFER_MW_DMA_2: | 169 | case XFER_MW_DMA_2: |
171 | mem_sttime = SBC_IDE_TIMING(MDMA2); | 170 | mem_sttime = SBC_IDE_TIMING(MDMA2); |
@@ -297,8 +296,8 @@ static int auide_dma_test_irq(ide_drive_t *drive) | |||
297 | */ | 296 | */ |
298 | drive->waiting_for_dma++; | 297 | drive->waiting_for_dma++; |
299 | if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { | 298 | if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) { |
300 | printk(KERN_WARNING "%s: timeout waiting for ddma to \ | 299 | printk(KERN_WARNING "%s: timeout waiting for ddma to complete\n", |
301 | complete\n", drive->name); | 300 | drive->name); |
302 | return 1; | 301 | return 1; |
303 | } | 302 | } |
304 | udelay(10); | 303 | udelay(10); |
diff --git a/drivers/ide/cmd640.c b/drivers/ide/cmd640.c index 1a32d62ed86b..d2b8b272bc27 100644 --- a/drivers/ide/cmd640.c +++ b/drivers/ide/cmd640.c | |||
@@ -572,9 +572,10 @@ static void cmd640_set_mode(ide_drive_t *drive, unsigned int index, | |||
572 | program_drive_counts(drive, index); | 572 | program_drive_counts(drive, index); |
573 | } | 573 | } |
574 | 574 | ||
575 | static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) | 575 | static void cmd640_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
576 | { | 576 | { |
577 | unsigned int index = 0, cycle_time; | 577 | unsigned int index = 0, cycle_time; |
578 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
578 | u8 b; | 579 | u8 b; |
579 | 580 | ||
580 | switch (pio) { | 581 | switch (pio) { |
@@ -605,7 +606,7 @@ static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
605 | } | 606 | } |
606 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ | 607 | #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ |
607 | 608 | ||
608 | static void cmd640_init_dev(ide_drive_t *drive) | 609 | static void __init cmd640_init_dev(ide_drive_t *drive) |
609 | { | 610 | { |
610 | unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1); | 611 | unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1); |
611 | 612 | ||
diff --git a/drivers/ide/cmd64x.c b/drivers/ide/cmd64x.c index f2500c8826bb..5f80312e636b 100644 --- a/drivers/ide/cmd64x.c +++ b/drivers/ide/cmd64x.c | |||
@@ -7,6 +7,7 @@ | |||
7 | * Copyright (C) 1998 David S. Miller (davem@redhat.com) | 7 | * Copyright (C) 1998 David S. Miller (davem@redhat.com) |
8 | * | 8 | * |
9 | * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> | 9 | * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org> |
10 | * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz | ||
10 | * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@mvista.com> | 11 | * Copyright (C) 2007,2009 MontaVista Software, Inc. <source@mvista.com> |
11 | */ | 12 | */ |
12 | 13 | ||
@@ -50,72 +51,42 @@ | |||
50 | #define UDIDETCR1 0x7B | 51 | #define UDIDETCR1 0x7B |
51 | #define DTPR1 0x7C | 52 | #define DTPR1 0x7C |
52 | 53 | ||
53 | static u8 quantize_timing(int timing, int quant) | 54 | static void cmd64x_program_timings(ide_drive_t *drive, u8 mode) |
54 | { | ||
55 | return (timing + quant - 1) / quant; | ||
56 | } | ||
57 | |||
58 | /* | ||
59 | * This routine calculates active/recovery counts and then writes them into | ||
60 | * the chipset registers. | ||
61 | */ | ||
62 | static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time) | ||
63 | { | 55 | { |
56 | ide_hwif_t *hwif = drive->hwif; | ||
64 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); | 57 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); |
65 | int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33); | 58 | int bus_speed = ide_pci_clk ? ide_pci_clk : 33; |
66 | u8 cycle_count, active_count, recovery_count, drwtim; | 59 | const unsigned long T = 1000000 / bus_speed; |
67 | static const u8 recovery_values[] = | 60 | static const u8 recovery_values[] = |
68 | {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; | 61 | {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0}; |
62 | static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; | ||
63 | static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; | ||
69 | static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; | 64 | static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3}; |
65 | struct ide_timing t; | ||
66 | u8 arttim = 0; | ||
70 | 67 | ||
71 | cycle_count = quantize_timing( cycle_time, clock_time); | 68 | ide_timing_compute(drive, mode, &t, T, 0); |
72 | active_count = quantize_timing(active_time, clock_time); | ||
73 | recovery_count = cycle_count - active_count; | ||
74 | 69 | ||
75 | /* | 70 | /* |
76 | * In case we've got too long recovery phase, try to lengthen | 71 | * In case we've got too long recovery phase, try to lengthen |
77 | * the active phase | 72 | * the active phase |
78 | */ | 73 | */ |
79 | if (recovery_count > 16) { | 74 | if (t.recover > 16) { |
80 | active_count += recovery_count - 16; | 75 | t.active += t.recover - 16; |
81 | recovery_count = 16; | 76 | t.recover = 16; |
82 | } | 77 | } |
83 | if (active_count > 16) /* shouldn't actually happen... */ | 78 | if (t.active > 16) /* shouldn't actually happen... */ |
84 | active_count = 16; | 79 | t.active = 16; |
85 | 80 | ||
86 | /* | 81 | /* |
87 | * Convert values to internal chipset representation | 82 | * Convert values to internal chipset representation |
88 | */ | 83 | */ |
89 | recovery_count = recovery_values[recovery_count]; | 84 | t.recover = recovery_values[t.recover]; |
90 | active_count &= 0x0f; | 85 | t.active &= 0x0f; |
91 | 86 | ||
92 | /* Program the active/recovery counts into the DRWTIM register */ | 87 | /* Program the active/recovery counts into the DRWTIM register */ |
93 | drwtim = (active_count << 4) | recovery_count; | 88 | pci_write_config_byte(dev, drwtim_regs[drive->dn], |
94 | (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim); | 89 | (t.active << 4) | t.recover); |
95 | } | ||
96 | |||
97 | /* | ||
98 | * This routine writes into the chipset registers | ||
99 | * PIO setup/active/recovery timings. | ||
100 | */ | ||
101 | static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) | ||
102 | { | ||
103 | ide_hwif_t *hwif = drive->hwif; | ||
104 | struct pci_dev *dev = to_pci_dev(hwif->dev); | ||
105 | struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); | ||
106 | unsigned long setup_count; | ||
107 | unsigned int cycle_time; | ||
108 | u8 arttim = 0; | ||
109 | |||
110 | static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0}; | ||
111 | static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; | ||
112 | |||
113 | cycle_time = ide_pio_cycle_time(drive, pio); | ||
114 | |||
115 | program_cycle_times(drive, cycle_time, t->active); | ||
116 | |||
117 | setup_count = quantize_timing(t->setup, | ||
118 | 1000 / (ide_pci_clk ? ide_pci_clk : 33)); | ||
119 | 90 | ||
120 | /* | 91 | /* |
121 | * The primary channel has individual address setup timing registers | 92 | * The primary channel has individual address setup timing registers |
@@ -126,15 +97,21 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) | |||
126 | if (hwif->channel) { | 97 | if (hwif->channel) { |
127 | ide_drive_t *pair = ide_get_pair_dev(drive); | 98 | ide_drive_t *pair = ide_get_pair_dev(drive); |
128 | 99 | ||
129 | ide_set_drivedata(drive, (void *)setup_count); | 100 | if (pair) { |
101 | struct ide_timing tp; | ||
130 | 102 | ||
131 | if (pair) | 103 | ide_timing_compute(pair, pair->pio_mode, &tp, T, 0); |
132 | setup_count = max_t(u8, setup_count, | 104 | ide_timing_merge(&t, &tp, &t, IDE_TIMING_SETUP); |
133 | (unsigned long)ide_get_drivedata(pair)); | 105 | if (pair->dma_mode) { |
106 | ide_timing_compute(pair, pair->dma_mode, | ||
107 | &tp, T, 0); | ||
108 | ide_timing_merge(&tp, &t, &t, IDE_TIMING_SETUP); | ||
109 | } | ||
110 | } | ||
134 | } | 111 | } |
135 | 112 | ||
136 | if (setup_count > 5) /* shouldn't actually happen... */ | 113 | if (t.setup > 5) /* shouldn't actually happen... */ |
137 | setup_count = 5; | 114 | t.setup = 5; |
138 | 115 | ||
139 | /* | 116 | /* |
140 | * Program the address setup clocks into the ARTTIM registers. | 117 | * Program the address setup clocks into the ARTTIM registers. |
@@ -144,7 +121,7 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) | |||
144 | if (hwif->channel) | 121 | if (hwif->channel) |
145 | arttim &= ~ARTTIM23_INTR_CH1; | 122 | arttim &= ~ARTTIM23_INTR_CH1; |
146 | arttim &= ~0xc0; | 123 | arttim &= ~0xc0; |
147 | arttim |= setup_values[setup_count]; | 124 | arttim |= setup_values[t.setup]; |
148 | (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); | 125 | (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim); |
149 | } | 126 | } |
150 | 127 | ||
@@ -153,8 +130,10 @@ static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio) | |||
153 | * Special cases are 8: prefetch off, 9: prefetch on (both never worked) | 130 | * Special cases are 8: prefetch off, 9: prefetch on (both never worked) |
154 | */ | 131 | */ |
155 | 132 | ||
156 | static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) | 133 | static void cmd64x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
157 | { | 134 | { |
135 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
136 | |||
158 | /* | 137 | /* |
159 | * Filter out the prefetch control values | 138 | * Filter out the prefetch control values |
160 | * to prevent PIO5 from being programmed | 139 | * to prevent PIO5 from being programmed |
@@ -162,20 +141,18 @@ static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
162 | if (pio == 8 || pio == 9) | 141 | if (pio == 8 || pio == 9) |
163 | return; | 142 | return; |
164 | 143 | ||
165 | cmd64x_tune_pio(drive, pio); | 144 | cmd64x_program_timings(drive, XFER_PIO_0 + pio); |
166 | } | 145 | } |
167 | 146 | ||
168 | static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) | 147 | static void cmd64x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
169 | { | 148 | { |
170 | ide_hwif_t *hwif = drive->hwif; | ||
171 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 149 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
172 | u8 unit = drive->dn & 0x01; | 150 | u8 unit = drive->dn & 0x01; |
173 | u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; | 151 | u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0; |
152 | const u8 speed = drive->dma_mode; | ||
174 | 153 | ||
175 | if (speed >= XFER_SW_DMA_0) { | 154 | pci_read_config_byte(dev, pciU, ®U); |
176 | (void) pci_read_config_byte(dev, pciU, ®U); | 155 | regU &= ~(unit ? 0xCA : 0x35); |
177 | regU &= ~(unit ? 0xCA : 0x35); | ||
178 | } | ||
179 | 156 | ||
180 | switch(speed) { | 157 | switch(speed) { |
181 | case XFER_UDMA_5: | 158 | case XFER_UDMA_5: |
@@ -197,18 +174,13 @@ static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
197 | regU |= unit ? 0xC2 : 0x31; | 174 | regU |= unit ? 0xC2 : 0x31; |
198 | break; | 175 | break; |
199 | case XFER_MW_DMA_2: | 176 | case XFER_MW_DMA_2: |
200 | program_cycle_times(drive, 120, 70); | ||
201 | break; | ||
202 | case XFER_MW_DMA_1: | 177 | case XFER_MW_DMA_1: |
203 | program_cycle_times(drive, 150, 80); | ||
204 | break; | ||
205 | case XFER_MW_DMA_0: | 178 | case XFER_MW_DMA_0: |
206 | program_cycle_times(drive, 480, 215); | 179 | cmd64x_program_timings(drive, speed); |
207 | break; | 180 | break; |
208 | } | 181 | } |
209 | 182 | ||
210 | if (speed >= XFER_SW_DMA_0) | 183 | pci_write_config_byte(dev, pciU, regU); |
211 | (void) pci_write_config_byte(dev, pciU, regU); | ||
212 | } | 184 | } |
213 | 185 | ||
214 | static void cmd648_clear_irq(ide_drive_t *drive) | 186 | static void cmd648_clear_irq(ide_drive_t *drive) |
@@ -471,6 +443,6 @@ static void __exit cmd64x_ide_exit(void) | |||
471 | module_init(cmd64x_ide_init); | 443 | module_init(cmd64x_ide_init); |
472 | module_exit(cmd64x_ide_exit); | 444 | module_exit(cmd64x_ide_exit); |
473 | 445 | ||
474 | MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick"); | 446 | MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick, Bartlomiej Zolnierkiewicz"); |
475 | MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); | 447 | MODULE_DESCRIPTION("PCI driver module for CMD64x IDE"); |
476 | MODULE_LICENSE("GPL"); | 448 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/ide/cs5520.c b/drivers/ide/cs5520.c index 09f98ed0731f..2c1e5f7cd261 100644 --- a/drivers/ide/cs5520.c +++ b/drivers/ide/cs5520.c | |||
@@ -57,11 +57,11 @@ static struct pio_clocks cs5520_pio_clocks[]={ | |||
57 | {1, 2, 1} | 57 | {1, 2, 1} |
58 | }; | 58 | }; |
59 | 59 | ||
60 | static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) | 60 | static void cs5520_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
61 | { | 61 | { |
62 | ide_hwif_t *hwif = drive->hwif; | ||
63 | struct pci_dev *pdev = to_pci_dev(hwif->dev); | 62 | struct pci_dev *pdev = to_pci_dev(hwif->dev); |
64 | int controller = drive->dn > 1 ? 1 : 0; | 63 | int controller = drive->dn > 1 ? 1 : 0; |
64 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
65 | 65 | ||
66 | /* 8bit CAT/CRT - 8bit command timing for channel */ | 66 | /* 8bit CAT/CRT - 8bit command timing for channel */ |
67 | pci_write_config_byte(pdev, 0x62 + controller, | 67 | pci_write_config_byte(pdev, 0x62 + controller, |
@@ -81,11 +81,12 @@ static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
81 | (cs5520_pio_clocks[pio].assert)); | 81 | (cs5520_pio_clocks[pio].assert)); |
82 | } | 82 | } |
83 | 83 | ||
84 | static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed) | 84 | static void cs5520_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
85 | { | 85 | { |
86 | printk(KERN_ERR "cs55x0: bad ide timing.\n"); | 86 | printk(KERN_ERR "cs55x0: bad ide timing.\n"); |
87 | 87 | ||
88 | cs5520_set_pio_mode(drive, 0); | 88 | drive->pio_mode = XFER_PIO_0 + 0; |
89 | cs5520_set_pio_mode(hwif, drive); | ||
89 | } | 90 | } |
90 | 91 | ||
91 | static const struct ide_port_ops cs5520_port_ops = { | 92 | static const struct ide_port_ops cs5520_port_ops = { |
diff --git a/drivers/ide/cs5530.c b/drivers/ide/cs5530.c index 40bf05eddf6e..4dc4eb92b076 100644 --- a/drivers/ide/cs5530.c +++ b/drivers/ide/cs5530.c | |||
@@ -41,8 +41,8 @@ static unsigned int cs5530_pio_timings[2][5] = { | |||
41 | 41 | ||
42 | /** | 42 | /** |
43 | * cs5530_set_pio_mode - set host controller for PIO mode | 43 | * cs5530_set_pio_mode - set host controller for PIO mode |
44 | * @hwif: port | ||
44 | * @drive: drive | 45 | * @drive: drive |
45 | * @pio: PIO mode number | ||
46 | * | 46 | * |
47 | * Handles setting of PIO mode for the chipset. | 47 | * Handles setting of PIO mode for the chipset. |
48 | * | 48 | * |
@@ -50,10 +50,11 @@ static unsigned int cs5530_pio_timings[2][5] = { | |||
50 | * will have valid default PIO timings set up before we get here. | 50 | * will have valid default PIO timings set up before we get here. |
51 | */ | 51 | */ |
52 | 52 | ||
53 | static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio) | 53 | static void cs5530_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
54 | { | 54 | { |
55 | unsigned long basereg = CS5530_BASEREG(drive->hwif); | 55 | unsigned long basereg = CS5530_BASEREG(hwif); |
56 | unsigned int format = (inl(basereg + 4) >> 31) & 1; | 56 | unsigned int format = (inl(basereg + 4) >> 31) & 1; |
57 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
57 | 58 | ||
58 | outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); | 59 | outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3)); |
59 | } | 60 | } |
@@ -99,12 +100,12 @@ out: | |||
99 | return mask; | 100 | return mask; |
100 | } | 101 | } |
101 | 102 | ||
102 | static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) | 103 | static void cs5530_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
103 | { | 104 | { |
104 | unsigned long basereg; | 105 | unsigned long basereg; |
105 | unsigned int reg, timings = 0; | 106 | unsigned int reg, timings = 0; |
106 | 107 | ||
107 | switch (mode) { | 108 | switch (drive->dma_mode) { |
108 | case XFER_UDMA_0: timings = 0x00921250; break; | 109 | case XFER_UDMA_0: timings = 0x00921250; break; |
109 | case XFER_UDMA_1: timings = 0x00911140; break; | 110 | case XFER_UDMA_1: timings = 0x00911140; break; |
110 | case XFER_UDMA_2: timings = 0x00911030; break; | 111 | case XFER_UDMA_2: timings = 0x00911030; break; |
@@ -112,7 +113,7 @@ static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode) | |||
112 | case XFER_MW_DMA_1: timings = 0x00012121; break; | 113 | case XFER_MW_DMA_1: timings = 0x00012121; break; |
113 | case XFER_MW_DMA_2: timings = 0x00002020; break; | 114 | case XFER_MW_DMA_2: timings = 0x00002020; break; |
114 | } | 115 | } |
115 | basereg = CS5530_BASEREG(drive->hwif); | 116 | basereg = CS5530_BASEREG(hwif); |
116 | reg = inl(basereg + 4); /* get drive0 config register */ | 117 | reg = inl(basereg + 4); /* get drive0 config register */ |
117 | timings |= reg & 0x80000000; /* preserve PIO format bit */ | 118 | timings |= reg & 0x80000000; /* preserve PIO format bit */ |
118 | if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ | 119 | if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */ |
diff --git a/drivers/ide/cs5535.c b/drivers/ide/cs5535.c index b883838adc24..5059fafadf29 100644 --- a/drivers/ide/cs5535.c +++ b/drivers/ide/cs5535.c | |||
@@ -86,7 +86,7 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) | |||
86 | cmd = pioa = speed - XFER_PIO_0; | 86 | cmd = pioa = speed - XFER_PIO_0; |
87 | 87 | ||
88 | if (pair) { | 88 | if (pair) { |
89 | u8 piob = ide_get_best_pio_mode(pair, 255, 4); | 89 | u8 piob = pair->pio_mode - XFER_PIO_0; |
90 | 90 | ||
91 | if (piob < cmd) | 91 | if (piob < cmd) |
92 | cmd = piob; | 92 | cmd = piob; |
@@ -129,28 +129,28 @@ static void cs5535_set_speed(ide_drive_t *drive, const u8 speed) | |||
129 | 129 | ||
130 | /** | 130 | /** |
131 | * cs5535_set_dma_mode - set host controller for DMA mode | 131 | * cs5535_set_dma_mode - set host controller for DMA mode |
132 | * @hwif: port | ||
132 | * @drive: drive | 133 | * @drive: drive |
133 | * @speed: DMA mode | ||
134 | * | 134 | * |
135 | * Programs the chipset for DMA mode. | 135 | * Programs the chipset for DMA mode. |
136 | */ | 136 | */ |
137 | 137 | ||
138 | static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed) | 138 | static void cs5535_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
139 | { | 139 | { |
140 | cs5535_set_speed(drive, speed); | 140 | cs5535_set_speed(drive, drive->dma_mode); |
141 | } | 141 | } |
142 | 142 | ||
143 | /** | 143 | /** |
144 | * cs5535_set_pio_mode - set host controller for PIO mode | 144 | * cs5535_set_pio_mode - set host controller for PIO mode |
145 | * @hwif: port | ||
145 | * @drive: drive | 146 | * @drive: drive |
146 | * @pio: PIO mode number | ||
147 | * | 147 | * |
148 | * A callback from the upper layers for PIO-only tuning. | 148 | * A callback from the upper layers for PIO-only tuning. |
149 | */ | 149 | */ |
150 | 150 | ||
151 | static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio) | 151 | static void cs5535_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
152 | { | 152 | { |
153 | cs5535_set_speed(drive, XFER_PIO_0 + pio); | 153 | cs5535_set_speed(drive, drive->pio_mode); |
154 | } | 154 | } |
155 | 155 | ||
156 | static u8 cs5535_cable_detect(ide_hwif_t *hwif) | 156 | static u8 cs5535_cable_detect(ide_hwif_t *hwif) |
diff --git a/drivers/ide/cs5536.c b/drivers/ide/cs5536.c index 9623b852c616..24214ab60ac0 100644 --- a/drivers/ide/cs5536.c +++ b/drivers/ide/cs5536.c | |||
@@ -125,11 +125,11 @@ static u8 cs5536_cable_detect(ide_hwif_t *hwif) | |||
125 | 125 | ||
126 | /** | 126 | /** |
127 | * cs5536_set_pio_mode - PIO timing setup | 127 | * cs5536_set_pio_mode - PIO timing setup |
128 | * @hwif: ATA port | ||
128 | * @drive: ATA device | 129 | * @drive: ATA device |
129 | * @pio: PIO mode number | ||
130 | */ | 130 | */ |
131 | 131 | ||
132 | static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) | 132 | static void cs5536_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
133 | { | 133 | { |
134 | static const u8 drv_timings[5] = { | 134 | static const u8 drv_timings[5] = { |
135 | 0x98, 0x55, 0x32, 0x21, 0x20, | 135 | 0x98, 0x55, 0x32, 0x21, 0x20, |
@@ -143,15 +143,16 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
143 | 0x99, 0x92, 0x90, 0x22, 0x20, | 143 | 0x99, 0x92, 0x90, 0x22, 0x20, |
144 | }; | 144 | }; |
145 | 145 | ||
146 | struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); | 146 | struct pci_dev *pdev = to_pci_dev(hwif->dev); |
147 | ide_drive_t *pair = ide_get_pair_dev(drive); | 147 | ide_drive_t *pair = ide_get_pair_dev(drive); |
148 | int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; | 148 | int cshift = (drive->dn & 1) ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT; |
149 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); | 149 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); |
150 | u32 cast; | 150 | u32 cast; |
151 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
151 | u8 cmd_pio = pio; | 152 | u8 cmd_pio = pio; |
152 | 153 | ||
153 | if (pair) | 154 | if (pair) |
154 | cmd_pio = min(pio, ide_get_best_pio_mode(pair, 255, 4)); | 155 | cmd_pio = min_t(u8, pio, pair->pio_mode - XFER_PIO_0); |
155 | 156 | ||
156 | timings &= (IDE_DRV_MASK << 8); | 157 | timings &= (IDE_DRV_MASK << 8); |
157 | timings |= drv_timings[pio]; | 158 | timings |= drv_timings[pio]; |
@@ -172,11 +173,11 @@ static void cs5536_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
172 | 173 | ||
173 | /** | 174 | /** |
174 | * cs5536_set_dma_mode - DMA timing setup | 175 | * cs5536_set_dma_mode - DMA timing setup |
176 | * @hwif: ATA port | ||
175 | * @drive: ATA device | 177 | * @drive: ATA device |
176 | * @mode: DMA mode | ||
177 | */ | 178 | */ |
178 | 179 | ||
179 | static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode) | 180 | static void cs5536_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
180 | { | 181 | { |
181 | static const u8 udma_timings[6] = { | 182 | static const u8 udma_timings[6] = { |
182 | 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, | 183 | 0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6, |
@@ -186,10 +187,11 @@ static void cs5536_set_dma_mode(ide_drive_t *drive, const u8 mode) | |||
186 | 0x67, 0x21, 0x20, | 187 | 0x67, 0x21, 0x20, |
187 | }; | 188 | }; |
188 | 189 | ||
189 | struct pci_dev *pdev = to_pci_dev(drive->hwif->dev); | 190 | struct pci_dev *pdev = to_pci_dev(hwif->dev); |
190 | int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; | 191 | int dshift = (drive->dn & 1) ? IDE_D1_SHIFT : IDE_D0_SHIFT; |
191 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); | 192 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); |
192 | u32 etc; | 193 | u32 etc; |
194 | const u8 mode = drive->dma_mode; | ||
193 | 195 | ||
194 | cs5536_read(pdev, ETC, &etc); | 196 | cs5536_read(pdev, ETC, &etc); |
195 | 197 | ||
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c index d6e2cbbc53a0..9383f67deae1 100644 --- a/drivers/ide/cy82c693.c +++ b/drivers/ide/cy82c693.c | |||
@@ -1,43 +1,11 @@ | |||
1 | /* | 1 | /* |
2 | * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer | 2 | * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer |
3 | * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator | 3 | * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator |
4 | * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz | ||
4 | * | 5 | * |
5 | * CYPRESS CY82C693 chipset IDE controller | 6 | * CYPRESS CY82C693 chipset IDE controller |
6 | * | 7 | * |
7 | * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. | 8 | * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards. |
8 | * Writing the driver was quite simple, since most of the job is | ||
9 | * done by the generic pci-ide support. | ||
10 | * The hard part was finding the CY82C693's datasheet on Cypress's | ||
11 | * web page :-(. But Altavista solved this problem :-). | ||
12 | * | ||
13 | * | ||
14 | * Notes: | ||
15 | * - I recently got a 16.8G IBM DTTA, so I was able to test it with | ||
16 | * a large and fast disk - the results look great, so I'd say the | ||
17 | * driver is working fine :-) | ||
18 | * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA | ||
19 | * - this is my first linux driver, so there's probably a lot of room | ||
20 | * for optimizations and bug fixing, so feel free to do it. | ||
21 | * - if using PIO mode it's a good idea to set the PIO mode and | ||
22 | * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda | ||
23 | * - I had some problems with my IBM DHEA with PIO modes < 2 | ||
24 | * (lost interrupts) ????? | ||
25 | * - first tests with DMA look okay, they seem to work, but there is a | ||
26 | * problem with sound - the BusMaster IDE TimeOut should fixed this | ||
27 | * | ||
28 | * Ancient History: | ||
29 | * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693 | ||
30 | * ASK@1999-01-23: v0.33 made a few minor code clean ups | ||
31 | * removed DMA clock speed setting by default | ||
32 | * added boot message | ||
33 | * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut | ||
34 | * added support to set DMA Controller Clock Speed | ||
35 | * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes | ||
36 | * on some drives. | ||
37 | * ASK@1998-10-29: v0.3 added support to set DMA modes | ||
38 | * ASK@1998-10-28: v0.2 added support to set PIO modes | ||
39 | * ASK@1998-10-27: v0.1 first version - chipset detection | ||
40 | * | ||
41 | */ | 9 | */ |
42 | 10 | ||
43 | #include <linux/module.h> | 11 | #include <linux/module.h> |
@@ -81,87 +49,13 @@ | |||
81 | #define CY82_INDEX_CHANNEL1 0x31 | 49 | #define CY82_INDEX_CHANNEL1 0x31 |
82 | #define CY82_INDEX_TIMEOUT 0x32 | 50 | #define CY82_INDEX_TIMEOUT 0x32 |
83 | 51 | ||
84 | /* the min and max PCI bus speed in MHz - from datasheet */ | ||
85 | #define CY82C963_MIN_BUS_SPEED 25 | ||
86 | #define CY82C963_MAX_BUS_SPEED 33 | ||
87 | |||
88 | /* the struct for the PIO mode timings */ | ||
89 | typedef struct pio_clocks_s { | ||
90 | u8 address_time; /* Address setup (clocks) */ | ||
91 | u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */ | ||
92 | u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */ | ||
93 | u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */ | ||
94 | } pio_clocks_t; | ||
95 | |||
96 | /* | ||
97 | * calc clocks using bus_speed | ||
98 | * returns (rounded up) time in bus clocks for time in ns | ||
99 | */ | ||
100 | static int calc_clk(int time, int bus_speed) | ||
101 | { | ||
102 | int clocks; | ||
103 | |||
104 | clocks = (time*bus_speed+999)/1000 - 1; | ||
105 | |||
106 | if (clocks < 0) | ||
107 | clocks = 0; | ||
108 | |||
109 | if (clocks > 0x0F) | ||
110 | clocks = 0x0F; | ||
111 | |||
112 | return clocks; | ||
113 | } | ||
114 | |||
115 | /* | ||
116 | * compute the values for the clock registers for PIO | ||
117 | * mode and pci_clk [MHz] speed | ||
118 | * | ||
119 | * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used | ||
120 | * for mode 3 and 4 drives 8 and 16-bit timings are the same | ||
121 | * | ||
122 | */ | ||
123 | static void compute_clocks(u8 pio, pio_clocks_t *p_pclk) | ||
124 | { | ||
125 | struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); | ||
126 | int clk1, clk2; | ||
127 | int bus_speed = ide_pci_clk ? ide_pci_clk : 33; | ||
128 | |||
129 | /* we don't check against CY82C693's min and max speed, | ||
130 | * so you can play with the idebus=xx parameter | ||
131 | */ | ||
132 | |||
133 | /* let's calc the address setup time clocks */ | ||
134 | p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed); | ||
135 | |||
136 | /* let's calc the active and recovery time clocks */ | ||
137 | clk1 = calc_clk(t->active, bus_speed); | ||
138 | |||
139 | /* calc recovery timing */ | ||
140 | clk2 = t->cycle - t->active - t->setup; | ||
141 | |||
142 | clk2 = calc_clk(clk2, bus_speed); | ||
143 | |||
144 | clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */ | ||
145 | |||
146 | /* note: we use the same values for 16bit IOR and IOW | ||
147 | * those are all the same, since I don't have other | ||
148 | * timings than those from ide-lib.c | ||
149 | */ | ||
150 | |||
151 | p_pclk->time_16r = (u8)clk1; | ||
152 | p_pclk->time_16w = (u8)clk1; | ||
153 | |||
154 | /* what are good values for 8bit ?? */ | ||
155 | p_pclk->time_8 = (u8)clk1; | ||
156 | } | ||
157 | |||
158 | /* | 52 | /* |
159 | * set DMA mode a specific channel for CY82C693 | 53 | * set DMA mode a specific channel for CY82C693 |
160 | */ | 54 | */ |
161 | 55 | ||
162 | static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) | 56 | static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
163 | { | 57 | { |
164 | ide_hwif_t *hwif = drive->hwif; | 58 | const u8 mode = drive->dma_mode; |
165 | u8 single = (mode & 0x10) >> 4, index = 0, data = 0; | 59 | u8 single = (mode & 0x10) >> 4, index = 0, data = 0; |
166 | 60 | ||
167 | index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; | 61 | index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0; |
@@ -186,12 +80,14 @@ static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode) | |||
186 | outb(data, CY82_DATA_PORT); | 80 | outb(data, CY82_DATA_PORT); |
187 | } | 81 | } |
188 | 82 | ||
189 | static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) | 83 | static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
190 | { | 84 | { |
191 | ide_hwif_t *hwif = drive->hwif; | ||
192 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 85 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
193 | pio_clocks_t pclk; | 86 | int bus_speed = ide_pci_clk ? ide_pci_clk : 33; |
87 | const unsigned long T = 1000000 / bus_speed; | ||
194 | unsigned int addrCtrl; | 88 | unsigned int addrCtrl; |
89 | struct ide_timing t; | ||
90 | u8 time_16, time_8; | ||
195 | 91 | ||
196 | /* select primary or secondary channel */ | 92 | /* select primary or secondary channel */ |
197 | if (hwif->index > 0) { /* drive is on the secondary channel */ | 93 | if (hwif->index > 0) { /* drive is on the secondary channel */ |
@@ -204,8 +100,12 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
204 | } | 100 | } |
205 | } | 101 | } |
206 | 102 | ||
207 | /* let's calc the values for this PIO mode */ | 103 | ide_timing_compute(drive, drive->pio_mode, &t, T, 1); |
208 | compute_clocks(pio, &pclk); | 104 | |
105 | time_16 = clamp_val(t.recover - 1, 0, 15) | | ||
106 | (clamp_val(t.active - 1, 0, 15) << 4); | ||
107 | time_8 = clamp_val(t.act8b - 1, 0, 15) | | ||
108 | (clamp_val(t.rec8b - 1, 0, 15) << 4); | ||
209 | 109 | ||
210 | /* now let's write the clocks registers */ | 110 | /* now let's write the clocks registers */ |
211 | if ((drive->dn & 1) == 0) { | 111 | if ((drive->dn & 1) == 0) { |
@@ -217,13 +117,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
217 | pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); | 117 | pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); |
218 | 118 | ||
219 | addrCtrl &= (~0xF); | 119 | addrCtrl &= (~0xF); |
220 | addrCtrl |= (unsigned int)pclk.address_time; | 120 | addrCtrl |= clamp_val(t.setup - 1, 0, 15); |
221 | pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); | 121 | pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); |
222 | 122 | ||
223 | /* now let's set the remaining registers */ | 123 | /* now let's set the remaining registers */ |
224 | pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r); | 124 | pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16); |
225 | pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w); | 125 | pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16); |
226 | pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8); | 126 | pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8); |
227 | } else { | 127 | } else { |
228 | /* | 128 | /* |
229 | * set slave drive | 129 | * set slave drive |
@@ -233,13 +133,13 @@ static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
233 | pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); | 133 | pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl); |
234 | 134 | ||
235 | addrCtrl &= (~0xF0); | 135 | addrCtrl &= (~0xF0); |
236 | addrCtrl |= ((unsigned int)pclk.address_time<<4); | 136 | addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4); |
237 | pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); | 137 | pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl); |
238 | 138 | ||
239 | /* now let's set the remaining registers */ | 139 | /* now let's set the remaining registers */ |
240 | pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r); | 140 | pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16); |
241 | pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w); | 141 | pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16); |
242 | pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8); | 142 | pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8); |
243 | } | 143 | } |
244 | } | 144 | } |
245 | 145 | ||
@@ -325,6 +225,6 @@ static void __exit cy82c693_ide_exit(void) | |||
325 | module_init(cy82c693_ide_init); | 225 | module_init(cy82c693_ide_init); |
326 | module_exit(cy82c693_ide_exit); | 226 | module_exit(cy82c693_ide_exit); |
327 | 227 | ||
328 | MODULE_AUTHOR("Andreas Krebs, Andre Hedrick"); | 228 | MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz"); |
329 | MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); | 229 | MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE"); |
330 | MODULE_LICENSE("GPL"); | 230 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/ide/dtc2278.c b/drivers/ide/dtc2278.c index c6b138122981..6929f7fce93a 100644 --- a/drivers/ide/dtc2278.c +++ b/drivers/ide/dtc2278.c | |||
@@ -68,11 +68,11 @@ static void sub22 (char b, char c) | |||
68 | 68 | ||
69 | static DEFINE_SPINLOCK(dtc2278_lock); | 69 | static DEFINE_SPINLOCK(dtc2278_lock); |
70 | 70 | ||
71 | static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio) | 71 | static void dtc2278_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
72 | { | 72 | { |
73 | unsigned long flags; | 73 | unsigned long flags; |
74 | 74 | ||
75 | if (pio >= 3) { | 75 | if (drive->pio_mode >= XFER_PIO_3) { |
76 | spin_lock_irqsave(&dtc2278_lock, flags); | 76 | spin_lock_irqsave(&dtc2278_lock, flags); |
77 | /* | 77 | /* |
78 | * This enables PIO mode4 (3?) on the first interface | 78 | * This enables PIO mode4 (3?) on the first interface |
diff --git a/drivers/ide/hpt366.c b/drivers/ide/hpt366.c index 4d90ac2dbb1b..b885c1d548f5 100644 --- a/drivers/ide/hpt366.c +++ b/drivers/ide/hpt366.c | |||
@@ -627,14 +627,14 @@ static u32 get_speed_setting(u8 speed, struct hpt_info *info) | |||
627 | return info->timings->clock_table[info->clock][i]; | 627 | return info->timings->clock_table[info->clock][i]; |
628 | } | 628 | } |
629 | 629 | ||
630 | static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) | 630 | static void hpt3xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
631 | { | 631 | { |
632 | ide_hwif_t *hwif = drive->hwif; | ||
633 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 632 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
634 | struct hpt_info *info = hpt3xx_get_info(hwif->dev); | 633 | struct hpt_info *info = hpt3xx_get_info(hwif->dev); |
635 | struct hpt_timings *t = info->timings; | 634 | struct hpt_timings *t = info->timings; |
636 | u8 itr_addr = 0x40 + (drive->dn * 4); | 635 | u8 itr_addr = 0x40 + (drive->dn * 4); |
637 | u32 old_itr = 0; | 636 | u32 old_itr = 0; |
637 | const u8 speed = drive->dma_mode; | ||
638 | u32 new_itr = get_speed_setting(speed, info); | 638 | u32 new_itr = get_speed_setting(speed, info); |
639 | u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask : | 639 | u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask : |
640 | (speed < XFER_UDMA_0 ? t->dma_mask : | 640 | (speed < XFER_UDMA_0 ? t->dma_mask : |
@@ -651,9 +651,10 @@ static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed) | |||
651 | pci_write_config_dword(dev, itr_addr, new_itr); | 651 | pci_write_config_dword(dev, itr_addr, new_itr); |
652 | } | 652 | } |
653 | 653 | ||
654 | static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio) | 654 | static void hpt3xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
655 | { | 655 | { |
656 | hpt3xx_set_mode(drive, XFER_PIO_0 + pio); | 656 | drive->dma_mode = drive->pio_mode; |
657 | hpt3xx_set_mode(hwif, drive); | ||
657 | } | 658 | } |
658 | 659 | ||
659 | static void hpt3xx_maskproc(ide_drive_t *drive, int mask) | 660 | static void hpt3xx_maskproc(ide_drive_t *drive, int mask) |
diff --git a/drivers/ide/ht6560b.c b/drivers/ide/ht6560b.c index aafed8060e17..d81e49680c3f 100644 --- a/drivers/ide/ht6560b.c +++ b/drivers/ide/ht6560b.c | |||
@@ -279,9 +279,10 @@ static void ht_set_prefetch(ide_drive_t *drive, u8 state) | |||
279 | #endif | 279 | #endif |
280 | } | 280 | } |
281 | 281 | ||
282 | static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio) | 282 | static void ht6560b_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
283 | { | 283 | { |
284 | unsigned long flags, config; | 284 | unsigned long flags, config; |
285 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
285 | u8 timing; | 286 | u8 timing; |
286 | 287 | ||
287 | switch (pio) { | 288 | switch (pio) { |
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c index 0f67f1abbbd3..4a697a238e28 100644 --- a/drivers/ide/icside.c +++ b/drivers/ide/icside.c | |||
@@ -65,6 +65,8 @@ static struct cardinfo icside_cardinfo_v6_2 = { | |||
65 | }; | 65 | }; |
66 | 66 | ||
67 | struct icside_state { | 67 | struct icside_state { |
68 | unsigned int channel; | ||
69 | unsigned int enabled; | ||
68 | void __iomem *irq_port; | 70 | void __iomem *irq_port; |
69 | void __iomem *ioc_base; | 71 | void __iomem *ioc_base; |
70 | unsigned int sel; | 72 | unsigned int sel; |
@@ -114,11 +116,18 @@ static void icside_irqenable_arcin_v6 (struct expansion_card *ec, int irqnr) | |||
114 | struct icside_state *state = ec->irq_data; | 116 | struct icside_state *state = ec->irq_data; |
115 | void __iomem *base = state->irq_port; | 117 | void __iomem *base = state->irq_port; |
116 | 118 | ||
117 | writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); | 119 | state->enabled = 1; |
118 | readb(base + ICS_ARCIN_V6_INTROFFSET_2); | ||
119 | 120 | ||
120 | writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); | 121 | switch (state->channel) { |
121 | readb(base + ICS_ARCIN_V6_INTROFFSET_1); | 122 | case 0: |
123 | writeb(0, base + ICS_ARCIN_V6_INTROFFSET_1); | ||
124 | readb(base + ICS_ARCIN_V6_INTROFFSET_2); | ||
125 | break; | ||
126 | case 1: | ||
127 | writeb(0, base + ICS_ARCIN_V6_INTROFFSET_2); | ||
128 | readb(base + ICS_ARCIN_V6_INTROFFSET_1); | ||
129 | break; | ||
130 | } | ||
122 | } | 131 | } |
123 | 132 | ||
124 | /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) | 133 | /* Prototype: icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) |
@@ -128,6 +137,8 @@ static void icside_irqdisable_arcin_v6 (struct expansion_card *ec, int irqnr) | |||
128 | { | 137 | { |
129 | struct icside_state *state = ec->irq_data; | 138 | struct icside_state *state = ec->irq_data; |
130 | 139 | ||
140 | state->enabled = 0; | ||
141 | |||
131 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); | 142 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); |
132 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); | 143 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); |
133 | } | 144 | } |
@@ -149,6 +160,44 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { | |||
149 | .irqpending = icside_irqpending_arcin_v6, | 160 | .irqpending = icside_irqpending_arcin_v6, |
150 | }; | 161 | }; |
151 | 162 | ||
163 | /* | ||
164 | * Handle routing of interrupts. This is called before | ||
165 | * we write the command to the drive. | ||
166 | */ | ||
167 | static void icside_maskproc(ide_drive_t *drive, int mask) | ||
168 | { | ||
169 | ide_hwif_t *hwif = drive->hwif; | ||
170 | struct expansion_card *ec = ECARD_DEV(hwif->dev); | ||
171 | struct icside_state *state = ecard_get_drvdata(ec); | ||
172 | unsigned long flags; | ||
173 | |||
174 | local_irq_save(flags); | ||
175 | |||
176 | state->channel = hwif->channel; | ||
177 | |||
178 | if (state->enabled && !mask) { | ||
179 | switch (hwif->channel) { | ||
180 | case 0: | ||
181 | writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); | ||
182 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); | ||
183 | break; | ||
184 | case 1: | ||
185 | writeb(0, state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); | ||
186 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); | ||
187 | break; | ||
188 | } | ||
189 | } else { | ||
190 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_2); | ||
191 | readb(state->irq_port + ICS_ARCIN_V6_INTROFFSET_1); | ||
192 | } | ||
193 | |||
194 | local_irq_restore(flags); | ||
195 | } | ||
196 | |||
197 | static const struct ide_port_ops icside_v6_no_dma_port_ops = { | ||
198 | .maskproc = icside_maskproc, | ||
199 | }; | ||
200 | |||
152 | #ifdef CONFIG_BLK_DEV_IDEDMA_ICS | 201 | #ifdef CONFIG_BLK_DEV_IDEDMA_ICS |
153 | /* | 202 | /* |
154 | * SG-DMA support. | 203 | * SG-DMA support. |
@@ -185,10 +234,11 @@ static const expansioncard_ops_t icside_ops_arcin_v6 = { | |||
185 | * MW1 80 50 50 150 C | 234 | * MW1 80 50 50 150 C |
186 | * MW2 70 25 25 120 C | 235 | * MW2 70 25 25 120 C |
187 | */ | 236 | */ |
188 | static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) | 237 | static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
189 | { | 238 | { |
190 | unsigned long cycle_time; | 239 | unsigned long cycle_time; |
191 | int use_dma_info = 0; | 240 | int use_dma_info = 0; |
241 | const u8 xfer_mode = drive->dma_mode; | ||
192 | 242 | ||
193 | switch (xfer_mode) { | 243 | switch (xfer_mode) { |
194 | case XFER_MW_DMA_2: | 244 | case XFER_MW_DMA_2: |
@@ -228,6 +278,7 @@ static void icside_set_dma_mode(ide_drive_t *drive, const u8 xfer_mode) | |||
228 | 278 | ||
229 | static const struct ide_port_ops icside_v6_port_ops = { | 279 | static const struct ide_port_ops icside_v6_port_ops = { |
230 | .set_dma_mode = icside_set_dma_mode, | 280 | .set_dma_mode = icside_set_dma_mode, |
281 | .maskproc = icside_maskproc, | ||
231 | }; | 282 | }; |
232 | 283 | ||
233 | static void icside_dma_host_set(ide_drive_t *drive, int on) | 284 | static void icside_dma_host_set(ide_drive_t *drive, int on) |
@@ -272,6 +323,11 @@ static int icside_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd) | |||
272 | BUG_ON(dma_channel_active(ec->dma)); | 323 | BUG_ON(dma_channel_active(ec->dma)); |
273 | 324 | ||
274 | /* | 325 | /* |
326 | * Ensure that we have the right interrupt routed. | ||
327 | */ | ||
328 | icside_maskproc(drive, 0); | ||
329 | |||
330 | /* | ||
275 | * Route the DMA signals to the correct interface. | 331 | * Route the DMA signals to the correct interface. |
276 | */ | 332 | */ |
277 | writeb(state->sel | hwif->channel, state->ioc_base); | 333 | writeb(state->sel | hwif->channel, state->ioc_base); |
@@ -399,6 +455,7 @@ err_free: | |||
399 | 455 | ||
400 | static const struct ide_port_info icside_v6_port_info __initdata = { | 456 | static const struct ide_port_info icside_v6_port_info __initdata = { |
401 | .init_dma = icside_dma_off_init, | 457 | .init_dma = icside_dma_off_init, |
458 | .port_ops = &icside_v6_no_dma_port_ops, | ||
402 | .dma_ops = &icside_v6_dma_ops, | 459 | .dma_ops = &icside_v6_dma_ops, |
403 | .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, | 460 | .host_flags = IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO, |
404 | .mwdma_mask = ATA_MWDMA2, | 461 | .mwdma_mask = ATA_MWDMA2, |
diff --git a/drivers/ide/ide-cs.c b/drivers/ide/ide-cs.c index dd6396384c25..ab87e4f7cec9 100644 --- a/drivers/ide/ide-cs.c +++ b/drivers/ide/ide-cs.c | |||
@@ -121,19 +121,11 @@ static int ide_probe(struct pcmcia_device *link) | |||
121 | static void ide_detach(struct pcmcia_device *link) | 121 | static void ide_detach(struct pcmcia_device *link) |
122 | { | 122 | { |
123 | ide_info_t *info = link->priv; | 123 | ide_info_t *info = link->priv; |
124 | ide_hwif_t *hwif = info->host->ports[0]; | ||
125 | unsigned long data_addr, ctl_addr; | ||
126 | 124 | ||
127 | dev_dbg(&link->dev, "ide_detach(0x%p)\n", link); | 125 | dev_dbg(&link->dev, "ide_detach(0x%p)\n", link); |
128 | 126 | ||
129 | data_addr = hwif->io_ports.data_addr; | ||
130 | ctl_addr = hwif->io_ports.ctl_addr; | ||
131 | |||
132 | ide_release(link); | 127 | ide_release(link); |
133 | 128 | ||
134 | release_region(ctl_addr, 1); | ||
135 | release_region(data_addr, 8); | ||
136 | |||
137 | kfree(info); | 129 | kfree(info); |
138 | } /* ide_detach */ | 130 | } /* ide_detach */ |
139 | 131 | ||
@@ -354,12 +346,19 @@ static void ide_release(struct pcmcia_device *link) | |||
354 | 346 | ||
355 | dev_dbg(&link->dev, "ide_release(0x%p)\n", link); | 347 | dev_dbg(&link->dev, "ide_release(0x%p)\n", link); |
356 | 348 | ||
357 | if (info->ndev) | 349 | if (info->ndev) { |
358 | /* FIXME: if this fails we need to queue the cleanup somehow | 350 | ide_hwif_t *hwif = host->ports[0]; |
359 | -- need to investigate the required PCMCIA magic */ | 351 | unsigned long data_addr, ctl_addr; |
352 | |||
353 | data_addr = hwif->io_ports.data_addr; | ||
354 | ctl_addr = hwif->io_ports.ctl_addr; | ||
355 | |||
360 | ide_host_remove(host); | 356 | ide_host_remove(host); |
357 | info->ndev = 0; | ||
361 | 358 | ||
362 | info->ndev = 0; | 359 | release_region(ctl_addr, 1); |
360 | release_region(data_addr, 8); | ||
361 | } | ||
363 | 362 | ||
364 | pcmcia_disable_device(link); | 363 | pcmcia_disable_device(link); |
365 | } /* ide_release */ | 364 | } /* ide_release */ |
diff --git a/drivers/ide/ide-devsets.c b/drivers/ide/ide-devsets.c index 1099bf7cf968..c6935c78757c 100644 --- a/drivers/ide/ide-devsets.c +++ b/drivers/ide/ide-devsets.c | |||
@@ -105,15 +105,17 @@ static int set_pio_mode(ide_drive_t *drive, int arg) | |||
105 | return -ENOSYS; | 105 | return -ENOSYS; |
106 | 106 | ||
107 | if (set_pio_mode_abuse(drive->hwif, arg)) { | 107 | if (set_pio_mode_abuse(drive->hwif, arg)) { |
108 | drive->pio_mode = arg + XFER_PIO_0; | ||
109 | |||
108 | if (arg == 8 || arg == 9) { | 110 | if (arg == 8 || arg == 9) { |
109 | unsigned long flags; | 111 | unsigned long flags; |
110 | 112 | ||
111 | /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ | 113 | /* take lock for IDE_DFLAG_[NO_]UNMASK/[NO_]IO_32BIT */ |
112 | spin_lock_irqsave(&hwif->lock, flags); | 114 | spin_lock_irqsave(&hwif->lock, flags); |
113 | port_ops->set_pio_mode(drive, arg); | 115 | port_ops->set_pio_mode(hwif, drive); |
114 | spin_unlock_irqrestore(&hwif->lock, flags); | 116 | spin_unlock_irqrestore(&hwif->lock, flags); |
115 | } else | 117 | } else |
116 | port_ops->set_pio_mode(drive, arg); | 118 | port_ops->set_pio_mode(hwif, drive); |
117 | } else { | 119 | } else { |
118 | int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); | 120 | int keep_dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA); |
119 | 121 | ||
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 222c1ef65fb9..376f2dc410c5 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c | |||
@@ -231,7 +231,7 @@ u8 eighty_ninty_three(ide_drive_t *drive) | |||
231 | u16 *id = drive->id; | 231 | u16 *id = drive->id; |
232 | int ivb = ide_in_drive_list(id, ivb_list); | 232 | int ivb = ide_in_drive_list(id, ivb_list); |
233 | 233 | ||
234 | if (hwif->cbl == ATA_CBL_PATA40_SHORT) | 234 | if (hwif->cbl == ATA_CBL_SATA || hwif->cbl == ATA_CBL_PATA40_SHORT) |
235 | return 1; | 235 | return 1; |
236 | 236 | ||
237 | if (ivb) | 237 | if (ivb) |
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index f8c1ae6ad74c..fbedd35feb44 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c | |||
@@ -1042,6 +1042,8 @@ static void ide_port_init_devices(ide_hwif_t *hwif) | |||
1042 | if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) | 1042 | if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS) |
1043 | drive->dev_flags |= IDE_DFLAG_NO_UNMASK; | 1043 | drive->dev_flags |= IDE_DFLAG_NO_UNMASK; |
1044 | 1044 | ||
1045 | drive->pio_mode = XFER_PIO_0; | ||
1046 | |||
1045 | if (port_ops && port_ops->init_dev) | 1047 | if (port_ops && port_ops->init_dev) |
1046 | port_ops->init_dev(drive); | 1048 | port_ops->init_dev(drive); |
1047 | } | 1049 | } |
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 6a0e62542167..b07232880ec9 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c | |||
@@ -1365,7 +1365,7 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) | |||
1365 | * supported here, and not in the corresponding block interface. Our own | 1365 | * supported here, and not in the corresponding block interface. Our own |
1366 | * ide-tape ioctls are supported on both interfaces. | 1366 | * ide-tape ioctls are supported on both interfaces. |
1367 | */ | 1367 | */ |
1368 | static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, | 1368 | static long do_idetape_chrdev_ioctl(struct file *file, |
1369 | unsigned int cmd, unsigned long arg) | 1369 | unsigned int cmd, unsigned long arg) |
1370 | { | 1370 | { |
1371 | struct ide_tape_obj *tape = file->private_data; | 1371 | struct ide_tape_obj *tape = file->private_data; |
@@ -1420,6 +1420,16 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, | |||
1420 | } | 1420 | } |
1421 | } | 1421 | } |
1422 | 1422 | ||
1423 | static long idetape_chrdev_ioctl(struct file *file, | ||
1424 | unsigned int cmd, unsigned long arg) | ||
1425 | { | ||
1426 | long ret; | ||
1427 | lock_kernel(); | ||
1428 | ret = do_idetape_chrdev_ioctl(file, cmd, arg); | ||
1429 | unlock_kernel(); | ||
1430 | return ret; | ||
1431 | } | ||
1432 | |||
1423 | /* | 1433 | /* |
1424 | * Do a mode sense page 0 with block descriptor and if it succeeds set the tape | 1434 | * Do a mode sense page 0 with block descriptor and if it succeeds set the tape |
1425 | * block size with the reported value. | 1435 | * block size with the reported value. |
@@ -1888,7 +1898,7 @@ static const struct file_operations idetape_fops = { | |||
1888 | .owner = THIS_MODULE, | 1898 | .owner = THIS_MODULE, |
1889 | .read = idetape_chrdev_read, | 1899 | .read = idetape_chrdev_read, |
1890 | .write = idetape_chrdev_write, | 1900 | .write = idetape_chrdev_write, |
1891 | .ioctl = idetape_chrdev_ioctl, | 1901 | .unlocked_ioctl = idetape_chrdev_ioctl, |
1892 | .open = idetape_chrdev_open, | 1902 | .open = idetape_chrdev_open, |
1893 | .release = idetape_chrdev_release, | 1903 | .release = idetape_chrdev_release, |
1894 | }; | 1904 | }; |
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c index 001a56365be5..0e05f75934c9 100644 --- a/drivers/ide/ide-timings.c +++ b/drivers/ide/ide-timings.c | |||
@@ -166,12 +166,13 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed, | |||
166 | if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ | 166 | if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ |
167 | memset(&p, 0, sizeof(p)); | 167 | memset(&p, 0, sizeof(p)); |
168 | 168 | ||
169 | if (speed <= XFER_PIO_2) | 169 | if (speed >= XFER_PIO_0 && speed < XFER_SW_DMA_0) { |
170 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; | 170 | if (speed <= XFER_PIO_2) |
171 | else if ((speed <= XFER_PIO_4) || | 171 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; |
172 | (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) | 172 | else if ((speed <= XFER_PIO_4) || |
173 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; | 173 | (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) |
174 | else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) | 174 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; |
175 | } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) | ||
175 | p.cycle = id[ATA_ID_EIDE_DMA_MIN]; | 176 | p.cycle = id[ATA_ID_EIDE_DMA_MIN]; |
176 | 177 | ||
177 | ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); | 178 | ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); |
@@ -185,11 +186,10 @@ int ide_timing_compute(ide_drive_t *drive, u8 speed, | |||
185 | /* | 186 | /* |
186 | * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, | 187 | * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, |
187 | * S.M.A.R.T and some other commands. We have to ensure that the | 188 | * S.M.A.R.T and some other commands. We have to ensure that the |
188 | * DMA cycle timing is slower/equal than the fastest PIO timing. | 189 | * DMA cycle timing is slower/equal than the current PIO timing. |
189 | */ | 190 | */ |
190 | if (speed >= XFER_SW_DMA_0) { | 191 | if (speed >= XFER_SW_DMA_0) { |
191 | u8 pio = ide_get_best_pio_mode(drive, 255, 5); | 192 | ide_timing_compute(drive, drive->pio_mode, &p, T, UT); |
192 | ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); | ||
193 | ide_timing_merge(&p, t, t, IDE_TIMING_ALL); | 193 | ide_timing_merge(&p, t, t, IDE_TIMING_ALL); |
194 | } | 194 | } |
195 | 195 | ||
diff --git a/drivers/ide/ide-xfer-mode.c b/drivers/ide/ide-xfer-mode.c index 46d203ce60cc..5fc8d5c17de9 100644 --- a/drivers/ide/ide-xfer-mode.c +++ b/drivers/ide/ide-xfer-mode.c | |||
@@ -58,7 +58,7 @@ EXPORT_SYMBOL(ide_xfer_verbose); | |||
58 | * This is used by most chipset support modules when "auto-tuning". | 58 | * This is used by most chipset support modules when "auto-tuning". |
59 | */ | 59 | */ |
60 | 60 | ||
61 | u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) | 61 | static u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) |
62 | { | 62 | { |
63 | u16 *id = drive->id; | 63 | u16 *id = drive->id; |
64 | int pio_mode = -1, overridden = 0; | 64 | int pio_mode = -1, overridden = 0; |
@@ -105,7 +105,6 @@ u8 ide_get_best_pio_mode(ide_drive_t *drive, u8 mode_wanted, u8 max_mode) | |||
105 | 105 | ||
106 | return pio_mode; | 106 | return pio_mode; |
107 | } | 107 | } |
108 | EXPORT_SYMBOL_GPL(ide_get_best_pio_mode); | ||
109 | 108 | ||
110 | int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio) | 109 | int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio) |
111 | { | 110 | { |
@@ -135,17 +134,20 @@ int ide_set_pio_mode(ide_drive_t *drive, const u8 mode) | |||
135 | * set transfer mode on the device in ->set_pio_mode method... | 134 | * set transfer mode on the device in ->set_pio_mode method... |
136 | */ | 135 | */ |
137 | if (port_ops->set_dma_mode == NULL) { | 136 | if (port_ops->set_dma_mode == NULL) { |
138 | port_ops->set_pio_mode(drive, mode - XFER_PIO_0); | 137 | drive->pio_mode = mode; |
138 | port_ops->set_pio_mode(hwif, drive); | ||
139 | return 0; | 139 | return 0; |
140 | } | 140 | } |
141 | 141 | ||
142 | if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { | 142 | if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { |
143 | if (ide_config_drive_speed(drive, mode)) | 143 | if (ide_config_drive_speed(drive, mode)) |
144 | return -1; | 144 | return -1; |
145 | port_ops->set_pio_mode(drive, mode - XFER_PIO_0); | 145 | drive->pio_mode = mode; |
146 | port_ops->set_pio_mode(hwif, drive); | ||
146 | return 0; | 147 | return 0; |
147 | } else { | 148 | } else { |
148 | port_ops->set_pio_mode(drive, mode - XFER_PIO_0); | 149 | drive->pio_mode = mode; |
150 | port_ops->set_pio_mode(hwif, drive); | ||
149 | return ide_config_drive_speed(drive, mode); | 151 | return ide_config_drive_speed(drive, mode); |
150 | } | 152 | } |
151 | } | 153 | } |
@@ -164,10 +166,12 @@ int ide_set_dma_mode(ide_drive_t *drive, const u8 mode) | |||
164 | if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { | 166 | if (hwif->host_flags & IDE_HFLAG_POST_SET_MODE) { |
165 | if (ide_config_drive_speed(drive, mode)) | 167 | if (ide_config_drive_speed(drive, mode)) |
166 | return -1; | 168 | return -1; |
167 | port_ops->set_dma_mode(drive, mode); | 169 | drive->dma_mode = mode; |
170 | port_ops->set_dma_mode(hwif, drive); | ||
168 | return 0; | 171 | return 0; |
169 | } else { | 172 | } else { |
170 | port_ops->set_dma_mode(drive, mode); | 173 | drive->dma_mode = mode; |
174 | port_ops->set_dma_mode(hwif, drive); | ||
171 | return ide_config_drive_speed(drive, mode); | 175 | return ide_config_drive_speed(drive, mode); |
172 | } | 176 | } |
173 | } | 177 | } |
diff --git a/drivers/ide/it8172.c b/drivers/ide/it8172.c index 0d266a5b524d..560e66d07659 100644 --- a/drivers/ide/it8172.c +++ b/drivers/ide/it8172.c | |||
@@ -37,12 +37,12 @@ | |||
37 | 37 | ||
38 | #define DRV_NAME "IT8172" | 38 | #define DRV_NAME "IT8172" |
39 | 39 | ||
40 | static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) | 40 | static void it8172_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
41 | { | 41 | { |
42 | ide_hwif_t *hwif = drive->hwif; | ||
43 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 42 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
44 | u16 drive_enables; | 43 | u16 drive_enables; |
45 | u32 drive_timing; | 44 | u32 drive_timing; |
45 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
46 | 46 | ||
47 | /* | 47 | /* |
48 | * The highest value of DIOR/DIOW pulse width and recovery time | 48 | * The highest value of DIOR/DIOW pulse width and recovery time |
@@ -77,14 +77,14 @@ static void it8172_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
77 | pci_write_config_dword(dev, 0x44, drive_timing); | 77 | pci_write_config_dword(dev, 0x44, drive_timing); |
78 | } | 78 | } |
79 | 79 | ||
80 | static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) | 80 | static void it8172_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
81 | { | 81 | { |
82 | ide_hwif_t *hwif = drive->hwif; | ||
83 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 82 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
84 | int a_speed = 3 << (drive->dn * 4); | 83 | int a_speed = 3 << (drive->dn * 4); |
85 | int u_flag = 1 << drive->dn; | 84 | int u_flag = 1 << drive->dn; |
86 | int u_speed = 0; | 85 | int u_speed = 0; |
87 | u8 reg48, reg4a; | 86 | u8 reg48, reg4a; |
87 | const u8 speed = drive->dma_mode; | ||
88 | 88 | ||
89 | pci_read_config_byte(dev, 0x48, ®48); | 89 | pci_read_config_byte(dev, 0x48, ®48); |
90 | pci_read_config_byte(dev, 0x4a, ®4a); | 90 | pci_read_config_byte(dev, 0x4a, ®4a); |
@@ -98,14 +98,14 @@ static void it8172_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
98 | pci_write_config_byte(dev, 0x4a, reg4a | u_speed); | 98 | pci_write_config_byte(dev, 0x4a, reg4a | u_speed); |
99 | } else { | 99 | } else { |
100 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; | 100 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; |
101 | u8 pio; | ||
102 | 101 | ||
103 | pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); | 102 | pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); |
104 | pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); | 103 | pci_write_config_byte(dev, 0x4a, reg4a & ~a_speed); |
105 | 104 | ||
106 | pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; | 105 | drive->pio_mode = |
106 | mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; | ||
107 | 107 | ||
108 | it8172_set_pio_mode(drive, pio); | 108 | it8172_set_pio_mode(hwif, drive); |
109 | } | 109 | } |
110 | } | 110 | } |
111 | 111 | ||
diff --git a/drivers/ide/it8213.c b/drivers/ide/it8213.c index 47976167796a..46816ba26416 100644 --- a/drivers/ide/it8213.c +++ b/drivers/ide/it8213.c | |||
@@ -17,15 +17,14 @@ | |||
17 | 17 | ||
18 | /** | 18 | /** |
19 | * it8213_set_pio_mode - set host controller for PIO mode | 19 | * it8213_set_pio_mode - set host controller for PIO mode |
20 | * @hwif: port | ||
20 | * @drive: drive | 21 | * @drive: drive |
21 | * @pio: PIO mode number | ||
22 | * | 22 | * |
23 | * Set the interface PIO mode. | 23 | * Set the interface PIO mode. |
24 | */ | 24 | */ |
25 | 25 | ||
26 | static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) | 26 | static void it8213_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
27 | { | 27 | { |
28 | ide_hwif_t *hwif = drive->hwif; | ||
29 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 28 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
30 | int is_slave = drive->dn & 1; | 29 | int is_slave = drive->dn & 1; |
31 | int master_port = 0x40; | 30 | int master_port = 0x40; |
@@ -35,6 +34,7 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
35 | u8 slave_data; | 34 | u8 slave_data; |
36 | static DEFINE_SPINLOCK(tune_lock); | 35 | static DEFINE_SPINLOCK(tune_lock); |
37 | int control = 0; | 36 | int control = 0; |
37 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
38 | 38 | ||
39 | static const u8 timings[][2] = { | 39 | static const u8 timings[][2] = { |
40 | { 0, 0 }, | 40 | { 0, 0 }, |
@@ -74,15 +74,14 @@ static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
74 | 74 | ||
75 | /** | 75 | /** |
76 | * it8213_set_dma_mode - set host controller for DMA mode | 76 | * it8213_set_dma_mode - set host controller for DMA mode |
77 | * @hwif: port | ||
77 | * @drive: drive | 78 | * @drive: drive |
78 | * @speed: DMA mode | ||
79 | * | 79 | * |
80 | * Tune the ITE chipset for the DMA mode. | 80 | * Tune the ITE chipset for the DMA mode. |
81 | */ | 81 | */ |
82 | 82 | ||
83 | static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) | 83 | static void it8213_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
84 | { | 84 | { |
85 | ide_hwif_t *hwif = drive->hwif; | ||
86 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 85 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
87 | u8 maslave = 0x40; | 86 | u8 maslave = 0x40; |
88 | int a_speed = 3 << (drive->dn * 4); | 87 | int a_speed = 3 << (drive->dn * 4); |
@@ -92,6 +91,7 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
92 | int u_speed = 0; | 91 | int u_speed = 0; |
93 | u16 reg4042, reg4a; | 92 | u16 reg4042, reg4a; |
94 | u8 reg48, reg54, reg55; | 93 | u8 reg48, reg54, reg55; |
94 | const u8 speed = drive->dma_mode; | ||
95 | 95 | ||
96 | pci_read_config_word(dev, maslave, ®4042); | 96 | pci_read_config_word(dev, maslave, ®4042); |
97 | pci_read_config_byte(dev, 0x48, ®48); | 97 | pci_read_config_byte(dev, 0x48, ®48); |
@@ -120,7 +120,6 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
120 | pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); | 120 | pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); |
121 | } else { | 121 | } else { |
122 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; | 122 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; |
123 | u8 pio; | ||
124 | 123 | ||
125 | if (reg48 & u_flag) | 124 | if (reg48 & u_flag) |
126 | pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); | 125 | pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); |
@@ -132,11 +131,12 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
132 | pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); | 131 | pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); |
133 | 132 | ||
134 | if (speed >= XFER_MW_DMA_0) | 133 | if (speed >= XFER_MW_DMA_0) |
135 | pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; | 134 | drive->pio_mode = |
135 | mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; | ||
136 | else | 136 | else |
137 | pio = 2; /* only SWDMA2 is allowed */ | 137 | drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ |
138 | 138 | ||
139 | it8213_set_pio_mode(drive, pio); | 139 | it8213_set_pio_mode(hwif, drive); |
140 | } | 140 | } |
141 | } | 141 | } |
142 | 142 | ||
diff --git a/drivers/ide/it821x.c b/drivers/ide/it821x.c index 51aa745246dc..b2709c733485 100644 --- a/drivers/ide/it821x.c +++ b/drivers/ide/it821x.c | |||
@@ -228,18 +228,18 @@ static void it821x_clock_strategy(ide_drive_t *drive) | |||
228 | 228 | ||
229 | /** | 229 | /** |
230 | * it821x_set_pio_mode - set host controller for PIO mode | 230 | * it821x_set_pio_mode - set host controller for PIO mode |
231 | * @hwif: port | ||
231 | * @drive: drive | 232 | * @drive: drive |
232 | * @pio: PIO mode number | ||
233 | * | 233 | * |
234 | * Tune the host to the desired PIO mode taking into the consideration | 234 | * Tune the host to the desired PIO mode taking into the consideration |
235 | * the maximum PIO mode supported by the other device on the cable. | 235 | * the maximum PIO mode supported by the other device on the cable. |
236 | */ | 236 | */ |
237 | 237 | ||
238 | static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) | 238 | static void it821x_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
239 | { | 239 | { |
240 | ide_hwif_t *hwif = drive->hwif; | ||
241 | struct it821x_dev *itdev = ide_get_hwifdata(hwif); | 240 | struct it821x_dev *itdev = ide_get_hwifdata(hwif); |
242 | ide_drive_t *pair = ide_get_pair_dev(drive); | 241 | ide_drive_t *pair = ide_get_pair_dev(drive); |
242 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
243 | u8 unit = drive->dn & 1, set_pio = pio; | 243 | u8 unit = drive->dn & 1, set_pio = pio; |
244 | 244 | ||
245 | /* Spec says 89 ref driver uses 88 */ | 245 | /* Spec says 89 ref driver uses 88 */ |
@@ -252,7 +252,7 @@ static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
252 | * on the cable. | 252 | * on the cable. |
253 | */ | 253 | */ |
254 | if (pair) { | 254 | if (pair) { |
255 | u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); | 255 | u8 pair_pio = pair->pio_mode - XFER_PIO_0; |
256 | /* trim PIO to the slowest of the master/slave */ | 256 | /* trim PIO to the slowest of the master/slave */ |
257 | if (pair_pio < set_pio) | 257 | if (pair_pio < set_pio) |
258 | set_pio = pair_pio; | 258 | set_pio = pair_pio; |
@@ -393,14 +393,16 @@ static int it821x_dma_end(ide_drive_t *drive) | |||
393 | 393 | ||
394 | /** | 394 | /** |
395 | * it821x_set_dma_mode - set host controller for DMA mode | 395 | * it821x_set_dma_mode - set host controller for DMA mode |
396 | * @hwif: port | ||
396 | * @drive: drive | 397 | * @drive: drive |
397 | * @speed: DMA mode | ||
398 | * | 398 | * |
399 | * Tune the ITE chipset for the desired DMA mode. | 399 | * Tune the ITE chipset for the desired DMA mode. |
400 | */ | 400 | */ |
401 | 401 | ||
402 | static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed) | 402 | static void it821x_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
403 | { | 403 | { |
404 | const u8 speed = drive->dma_mode; | ||
405 | |||
404 | /* | 406 | /* |
405 | * MWDMA tuning is really hard because our MWDMA and PIO | 407 | * MWDMA tuning is really hard because our MWDMA and PIO |
406 | * timings are kept in the same place. We can switch in the | 408 | * timings are kept in the same place. We can switch in the |
diff --git a/drivers/ide/jmicron.c b/drivers/ide/jmicron.c index bf2be6431b20..74c2c4a6d909 100644 --- a/drivers/ide/jmicron.c +++ b/drivers/ide/jmicron.c | |||
@@ -80,19 +80,19 @@ static u8 jmicron_cable_detect(ide_hwif_t *hwif) | |||
80 | return ATA_CBL_PATA80; | 80 | return ATA_CBL_PATA80; |
81 | } | 81 | } |
82 | 82 | ||
83 | static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio) | 83 | static void jmicron_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
84 | { | 84 | { |
85 | } | 85 | } |
86 | 86 | ||
87 | /** | 87 | /** |
88 | * jmicron_set_dma_mode - set host controller for DMA mode | 88 | * jmicron_set_dma_mode - set host controller for DMA mode |
89 | * @hwif: port | ||
89 | * @drive: drive | 90 | * @drive: drive |
90 | * @mode: DMA mode | ||
91 | * | 91 | * |
92 | * As the JMicron snoops for timings we don't need to do anything here. | 92 | * As the JMicron snoops for timings we don't need to do anything here. |
93 | */ | 93 | */ |
94 | 94 | ||
95 | static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode) | 95 | static void jmicron_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
96 | { | 96 | { |
97 | } | 97 | } |
98 | 98 | ||
diff --git a/drivers/ide/opti621.c b/drivers/ide/opti621.c index f1d70d6630fe..1a53a4c375ed 100644 --- a/drivers/ide/opti621.c +++ b/drivers/ide/opti621.c | |||
@@ -8,77 +8,6 @@ | |||
8 | * Jan Harkes <jaharkes@cwi.nl>, | 8 | * Jan Harkes <jaharkes@cwi.nl>, |
9 | * Mark Lord <mlord@pobox.com> | 9 | * Mark Lord <mlord@pobox.com> |
10 | * Some parts of code are from ali14xx.c and from rz1000.c. | 10 | * Some parts of code are from ali14xx.c and from rz1000.c. |
11 | * | ||
12 | * OPTi is trademark of OPTi, Octek is trademark of Octek. | ||
13 | * | ||
14 | * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps | ||
15 | * and disassembled/traced setupvic.exe (DOS program). | ||
16 | * It increases kernel code about 2 kB. | ||
17 | * I don't have this card no more, but I hope I can get some in case | ||
18 | * of needed development. | ||
19 | * My card is Octek PIDE 1.01 (on card) or OPTiViC (program). | ||
20 | * It has a place for a secondary connector in circuit, but nothing | ||
21 | * is there. Also BIOS says no address for | ||
22 | * secondary controller (see bellow in ide_init_opti621). | ||
23 | * I've only tested this on my system, which only has one disk. | ||
24 | * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus | ||
25 | * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random | ||
26 | * lockups). I tried the OCTEK double speed CD-ROM and | ||
27 | * it does not work! But I can't boot DOS also, so it's probably | ||
28 | * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no | ||
29 | * problems) and Seagate 1GB (as slave, WD as master). My experiences | ||
30 | * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes | ||
31 | * it slows to about 100kB/s! I don't know why and I have | ||
32 | * not this drive now, so I can't try it again. | ||
33 | * I write this driver because I lost the paper ("manual") with | ||
34 | * settings of jumpers on the card and I have to boot Linux with | ||
35 | * Loadlin except LILO, cause I have to run the setupvic.exe program | ||
36 | * already or I get disk errors (my test: rpm -Vf | ||
37 | * /usr/X11R6/bin/XF86_SVGA - or any big file). | ||
38 | * Some numbers from hdparm -t /dev/hda: | ||
39 | * Timing buffer-cache reads: 32 MB in 3.02 seconds =10.60 MB/sec | ||
40 | * Timing buffered disk reads: 16 MB in 5.52 seconds = 2.90 MB/sec | ||
41 | * I have 4 Megs/s before, but I don't know why (maybe changes | ||
42 | * in hdparm test). | ||
43 | * After release of 0.1, I got some successful reports, so it might work. | ||
44 | * | ||
45 | * The main problem with OPTi is that some timings for master | ||
46 | * and slave must be the same. For example, if you have master | ||
47 | * PIO 3 and slave PIO 0, driver have to set some timings of | ||
48 | * master for PIO 0. Second problem is that opti621_set_pio_mode | ||
49 | * got only one drive to set, but have to set both drives. | ||
50 | * This is solved in compute_pios. If you don't set | ||
51 | * the second drive, compute_pios use ide_get_best_pio_mode | ||
52 | * for autoselect mode (you can change it to PIO 0, if you want). | ||
53 | * If you then set the second drive to another PIO, the old value | ||
54 | * (automatically selected) will be overrided by yours. | ||
55 | * There is a 25/33MHz switch in configuration | ||
56 | * register, but driver is written for use at any frequency. | ||
57 | * | ||
58 | * Version 0.1, Nov 8, 1996 | ||
59 | * by Jaromir Koutek, for 2.1.8. | ||
60 | * Initial version of driver. | ||
61 | * | ||
62 | * Version 0.2 | ||
63 | * Number 0.2 skipped. | ||
64 | * | ||
65 | * Version 0.3, Nov 29, 1997 | ||
66 | * by Mark Lord (probably), for 2.1.68 | ||
67 | * Updates for use with new IDE block driver. | ||
68 | * | ||
69 | * Version 0.4, Dec 14, 1997 | ||
70 | * by Jan Harkes | ||
71 | * Fixed some errors and cleaned the code. | ||
72 | * | ||
73 | * Version 0.5, Jan 2, 1998 | ||
74 | * by Jaromir Koutek | ||
75 | * Updates for use with (again) new IDE block driver. | ||
76 | * Update of documentation. | ||
77 | * | ||
78 | * Version 0.6, Jan 2, 1999 | ||
79 | * by Jaromir Koutek | ||
80 | * Reversed to version 0.3 of the driver, because | ||
81 | * 0.5 doesn't work. | ||
82 | */ | 11 | */ |
83 | 12 | ||
84 | #include <linux/types.h> | 13 | #include <linux/types.h> |
@@ -133,12 +62,12 @@ static u8 read_reg(int reg) | |||
133 | return ret; | 62 | return ret; |
134 | } | 63 | } |
135 | 64 | ||
136 | static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) | 65 | static void opti621_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
137 | { | 66 | { |
138 | ide_hwif_t *hwif = drive->hwif; | ||
139 | ide_drive_t *pair = ide_get_pair_dev(drive); | 67 | ide_drive_t *pair = ide_get_pair_dev(drive); |
140 | unsigned long flags; | 68 | unsigned long flags; |
141 | unsigned long mode = XFER_PIO_0 + pio, pair_mode; | 69 | unsigned long mode = drive->pio_mode, pair_mode; |
70 | const u8 pio = mode - XFER_PIO_0; | ||
142 | u8 tim, misc, addr_pio = pio, clk; | 71 | u8 tim, misc, addr_pio = pio, clk; |
143 | 72 | ||
144 | /* DRDY is default 2 (by OPTi Databook) */ | 73 | /* DRDY is default 2 (by OPTi Databook) */ |
diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index f8eddf05ecb8..9e8f4e1b0cc9 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c | |||
@@ -166,7 +166,7 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, | |||
166 | writel(val32, base + BK3710_DATRCVR); | 166 | writel(val32, base + BK3710_DATRCVR); |
167 | 167 | ||
168 | if (mate) { | 168 | if (mate) { |
169 | u8 mode2 = ide_get_best_pio_mode(mate, 255, 4); | 169 | u8 mode2 = mate->pio_mode - XFER_PIO_0; |
170 | 170 | ||
171 | if (mode2 < mode) | 171 | if (mode2 < mode) |
172 | mode = mode2; | 172 | mode = mode2; |
@@ -188,10 +188,11 @@ static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, | |||
188 | writel(val32, base + BK3710_REGRCVR); | 188 | writel(val32, base + BK3710_REGRCVR); |
189 | } | 189 | } |
190 | 190 | ||
191 | static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) | 191 | static void palm_bk3710_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
192 | { | 192 | { |
193 | int is_slave = drive->dn & 1; | 193 | int is_slave = drive->dn & 1; |
194 | void __iomem *base = (void *)drive->hwif->dma_base; | 194 | void __iomem *base = (void *)hwif->dma_base; |
195 | const u8 xferspeed = drive->dma_mode; | ||
195 | 196 | ||
196 | if (xferspeed >= XFER_UDMA_0) { | 197 | if (xferspeed >= XFER_UDMA_0) { |
197 | palm_bk3710_setudmamode(base, is_slave, | 198 | palm_bk3710_setudmamode(base, is_slave, |
@@ -203,12 +204,13 @@ static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) | |||
203 | } | 204 | } |
204 | } | 205 | } |
205 | 206 | ||
206 | static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) | 207 | static void palm_bk3710_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
207 | { | 208 | { |
208 | unsigned int cycle_time; | 209 | unsigned int cycle_time; |
209 | int is_slave = drive->dn & 1; | 210 | int is_slave = drive->dn & 1; |
210 | ide_drive_t *mate; | 211 | ide_drive_t *mate; |
211 | void __iomem *base = (void *)drive->hwif->dma_base; | 212 | void __iomem *base = (void *)hwif->dma_base; |
213 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
212 | 214 | ||
213 | /* | 215 | /* |
214 | * Obtain the drive PIO data for tuning the Palm Chip registers | 216 | * Obtain the drive PIO data for tuning the Palm Chip registers |
diff --git a/drivers/ide/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index 65ba8239e7b5..9546fe2a93f7 100644 --- a/drivers/ide/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c | |||
@@ -129,11 +129,11 @@ static struct udma_timing { | |||
129 | { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ | 129 | { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */ |
130 | }; | 130 | }; |
131 | 131 | ||
132 | static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) | 132 | static void pdcnew_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
133 | { | 133 | { |
134 | ide_hwif_t *hwif = drive->hwif; | ||
135 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 134 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
136 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; | 135 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; |
136 | const u8 speed = drive->dma_mode; | ||
137 | 137 | ||
138 | /* | 138 | /* |
139 | * IDE core issues SETFEATURES_XFER to the drive first (thanks to | 139 | * IDE core issues SETFEATURES_XFER to the drive first (thanks to |
@@ -167,11 +167,11 @@ static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
167 | } | 167 | } |
168 | } | 168 | } |
169 | 169 | ||
170 | static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio) | 170 | static void pdcnew_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
171 | { | 171 | { |
172 | ide_hwif_t *hwif = drive->hwif; | ||
173 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 172 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
174 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; | 173 | u8 adj = (drive->dn & 1) ? 0x08 : 0x00; |
174 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
175 | 175 | ||
176 | if (max_dma_rate(dev) == 4) { | 176 | if (max_dma_rate(dev) == 4) { |
177 | set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); | 177 | set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c); |
diff --git a/drivers/ide/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 35161dd840a0..c5f3841af360 100644 --- a/drivers/ide/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> | 2 | * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org> |
3 | * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. | 3 | * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc. |
4 | * Copyright (C) 2007 Bartlomiej Zolnierkiewicz | 4 | * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz |
5 | * | 5 | * |
6 | * Portions Copyright (C) 1999 Promise Technology, Inc. | 6 | * Portions Copyright (C) 1999 Promise Technology, Inc. |
7 | * Author: Frank Tiernan (frankt@promise.com) | 7 | * Author: Frank Tiernan (frankt@promise.com) |
@@ -21,23 +21,15 @@ | |||
21 | 21 | ||
22 | #define DRV_NAME "pdc202xx_old" | 22 | #define DRV_NAME "pdc202xx_old" |
23 | 23 | ||
24 | static void pdc_old_disable_66MHz_clock(ide_hwif_t *); | 24 | static void pdc202xx_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
25 | |||
26 | static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) | ||
27 | { | 25 | { |
28 | ide_hwif_t *hwif = drive->hwif; | ||
29 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 26 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
30 | u8 drive_pci = 0x60 + (drive->dn << 2); | 27 | u8 drive_pci = 0x60 + (drive->dn << 2); |
28 | const u8 speed = drive->dma_mode; | ||
31 | 29 | ||
32 | u8 AP = 0, BP = 0, CP = 0; | 30 | u8 AP = 0, BP = 0, CP = 0; |
33 | u8 TA = 0, TB = 0, TC = 0; | 31 | u8 TA = 0, TB = 0, TC = 0; |
34 | 32 | ||
35 | /* | ||
36 | * TODO: do this once per channel | ||
37 | */ | ||
38 | if (dev->device != PCI_DEVICE_ID_PROMISE_20246) | ||
39 | pdc_old_disable_66MHz_clock(hwif); | ||
40 | |||
41 | pci_read_config_byte(dev, drive_pci, &AP); | 33 | pci_read_config_byte(dev, drive_pci, &AP); |
42 | pci_read_config_byte(dev, drive_pci + 1, &BP); | 34 | pci_read_config_byte(dev, drive_pci + 1, &BP); |
43 | pci_read_config_byte(dev, drive_pci + 2, &CP); | 35 | pci_read_config_byte(dev, drive_pci + 2, &CP); |
@@ -84,9 +76,10 @@ static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed) | |||
84 | } | 76 | } |
85 | } | 77 | } |
86 | 78 | ||
87 | static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio) | 79 | static void pdc202xx_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
88 | { | 80 | { |
89 | pdc202xx_set_mode(drive, XFER_PIO_0 + pio); | 81 | drive->dma_mode = drive->pio_mode; |
82 | pdc202xx_set_mode(hwif, drive); | ||
90 | } | 83 | } |
91 | 84 | ||
92 | static int pdc202xx_test_irq(ide_hwif_t *hwif) | 85 | static int pdc202xx_test_irq(ide_hwif_t *hwif) |
@@ -100,13 +93,13 @@ static int pdc202xx_test_irq(ide_hwif_t *hwif) | |||
100 | * bit 7: error, bit 6: interrupting, | 93 | * bit 7: error, bit 6: interrupting, |
101 | * bit 5: FIFO full, bit 4: FIFO empty | 94 | * bit 5: FIFO full, bit 4: FIFO empty |
102 | */ | 95 | */ |
103 | return ((sc1d & 0x50) == 0x40) ? 1 : 0; | 96 | return ((sc1d & 0x50) == 0x50) ? 1 : 0; |
104 | } else { | 97 | } else { |
105 | /* | 98 | /* |
106 | * bit 3: error, bit 2: interrupting, | 99 | * bit 3: error, bit 2: interrupting, |
107 | * bit 1: FIFO full, bit 0: FIFO empty | 100 | * bit 1: FIFO full, bit 0: FIFO empty |
108 | */ | 101 | */ |
109 | return ((sc1d & 0x05) == 0x04) ? 1 : 0; | 102 | return ((sc1d & 0x05) == 0x05) ? 1 : 0; |
110 | } | 103 | } |
111 | } | 104 | } |
112 | 105 | ||
@@ -145,6 +138,11 @@ static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif) | |||
145 | outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); | 138 | outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg); |
146 | } | 139 | } |
147 | 140 | ||
141 | static void pdc2026x_init_hwif(ide_hwif_t *hwif) | ||
142 | { | ||
143 | pdc_old_disable_66MHz_clock(hwif); | ||
144 | } | ||
145 | |||
148 | static void pdc202xx_dma_start(ide_drive_t *drive) | 146 | static void pdc202xx_dma_start(ide_drive_t *drive) |
149 | { | 147 | { |
150 | if (drive->current_speed > XFER_UDMA_2) | 148 | if (drive->current_speed > XFER_UDMA_2) |
@@ -261,6 +259,7 @@ static const struct ide_dma_ops pdc2026x_dma_ops = { | |||
261 | { \ | 259 | { \ |
262 | .name = DRV_NAME, \ | 260 | .name = DRV_NAME, \ |
263 | .init_chipset = init_chipset_pdc202xx, \ | 261 | .init_chipset = init_chipset_pdc202xx, \ |
262 | .init_hwif = pdc2026x_init_hwif, \ | ||
264 | .port_ops = &pdc2026x_port_ops, \ | 263 | .port_ops = &pdc2026x_port_ops, \ |
265 | .dma_ops = &pdc2026x_dma_ops, \ | 264 | .dma_ops = &pdc2026x_dma_ops, \ |
266 | .host_flags = IDE_HFLAGS_PDC202XX, \ | 265 | .host_flags = IDE_HFLAGS_PDC202XX, \ |
@@ -356,6 +355,6 @@ static void __exit pdc202xx_ide_exit(void) | |||
356 | module_init(pdc202xx_ide_init); | 355 | module_init(pdc202xx_ide_init); |
357 | module_exit(pdc202xx_ide_exit); | 356 | module_exit(pdc202xx_ide_exit); |
358 | 357 | ||
359 | MODULE_AUTHOR("Andre Hedrick, Frank Tiernan"); | 358 | MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Bartlomiej Zolnierkiewicz"); |
360 | MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); | 359 | MODULE_DESCRIPTION("PCI driver module for older Promise IDE"); |
361 | MODULE_LICENSE("GPL"); | 360 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c index bf14f39bd3a7..1bdca49e5a03 100644 --- a/drivers/ide/piix.c +++ b/drivers/ide/piix.c | |||
@@ -59,15 +59,14 @@ static int no_piix_dma; | |||
59 | 59 | ||
60 | /** | 60 | /** |
61 | * piix_set_pio_mode - set host controller for PIO mode | 61 | * piix_set_pio_mode - set host controller for PIO mode |
62 | * @port: port | ||
62 | * @drive: drive | 63 | * @drive: drive |
63 | * @pio: PIO mode number | ||
64 | * | 64 | * |
65 | * Set the interface PIO mode based upon the settings done by AMI BIOS. | 65 | * Set the interface PIO mode based upon the settings done by AMI BIOS. |
66 | */ | 66 | */ |
67 | 67 | ||
68 | static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) | 68 | static void piix_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
69 | { | 69 | { |
70 | ide_hwif_t *hwif = drive->hwif; | ||
71 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 70 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
72 | int is_slave = drive->dn & 1; | 71 | int is_slave = drive->dn & 1; |
73 | int master_port = hwif->channel ? 0x42 : 0x40; | 72 | int master_port = hwif->channel ? 0x42 : 0x40; |
@@ -77,6 +76,7 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
77 | u8 slave_data; | 76 | u8 slave_data; |
78 | static DEFINE_SPINLOCK(tune_lock); | 77 | static DEFINE_SPINLOCK(tune_lock); |
79 | int control = 0; | 78 | int control = 0; |
79 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
80 | 80 | ||
81 | /* ISP RTC */ | 81 | /* ISP RTC */ |
82 | static const u8 timings[][2]= { | 82 | static const u8 timings[][2]= { |
@@ -127,16 +127,15 @@ static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
127 | 127 | ||
128 | /** | 128 | /** |
129 | * piix_set_dma_mode - set host controller for DMA mode | 129 | * piix_set_dma_mode - set host controller for DMA mode |
130 | * @hwif: port | ||
130 | * @drive: drive | 131 | * @drive: drive |
131 | * @speed: DMA mode | ||
132 | * | 132 | * |
133 | * Set a PIIX host controller to the desired DMA mode. This involves | 133 | * Set a PIIX host controller to the desired DMA mode. This involves |
134 | * programming the right timing data into the PCI configuration space. | 134 | * programming the right timing data into the PCI configuration space. |
135 | */ | 135 | */ |
136 | 136 | ||
137 | static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) | 137 | static void piix_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
138 | { | 138 | { |
139 | ide_hwif_t *hwif = drive->hwif; | ||
140 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 139 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
141 | u8 maslave = hwif->channel ? 0x42 : 0x40; | 140 | u8 maslave = hwif->channel ? 0x42 : 0x40; |
142 | int a_speed = 3 << (drive->dn * 4); | 141 | int a_speed = 3 << (drive->dn * 4); |
@@ -147,6 +146,7 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
147 | int sitre; | 146 | int sitre; |
148 | u16 reg4042, reg4a; | 147 | u16 reg4042, reg4a; |
149 | u8 reg48, reg54, reg55; | 148 | u8 reg48, reg54, reg55; |
149 | const u8 speed = drive->dma_mode; | ||
150 | 150 | ||
151 | pci_read_config_word(dev, maslave, ®4042); | 151 | pci_read_config_word(dev, maslave, ®4042); |
152 | sitre = (reg4042 & 0x4000) ? 1 : 0; | 152 | sitre = (reg4042 & 0x4000) ? 1 : 0; |
@@ -176,7 +176,6 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
176 | pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); | 176 | pci_write_config_byte(dev, 0x54, reg54 & ~v_flag); |
177 | } else { | 177 | } else { |
178 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; | 178 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; |
179 | u8 pio; | ||
180 | 179 | ||
181 | if (reg48 & u_flag) | 180 | if (reg48 & u_flag) |
182 | pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); | 181 | pci_write_config_byte(dev, 0x48, reg48 & ~u_flag); |
@@ -188,11 +187,12 @@ static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
188 | pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); | 187 | pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag); |
189 | 188 | ||
190 | if (speed >= XFER_MW_DMA_0) | 189 | if (speed >= XFER_MW_DMA_0) |
191 | pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; | 190 | drive->pio_mode = |
191 | mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; | ||
192 | else | 192 | else |
193 | pio = 2; /* only SWDMA2 is allowed */ | 193 | drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ |
194 | 194 | ||
195 | piix_set_pio_mode(drive, pio); | 195 | piix_set_pio_mode(hwif, drive); |
196 | } | 196 | } |
197 | } | 197 | } |
198 | 198 | ||
diff --git a/drivers/ide/pmac.c b/drivers/ide/pmac.c index 7a4e788cab2f..850ee452e9bb 100644 --- a/drivers/ide/pmac.c +++ b/drivers/ide/pmac.c | |||
@@ -496,12 +496,11 @@ static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl) | |||
496 | /* | 496 | /* |
497 | * Old tuning functions (called on hdparm -p), sets up drive PIO timings | 497 | * Old tuning functions (called on hdparm -p), sets up drive PIO timings |
498 | */ | 498 | */ |
499 | static void | 499 | static void pmac_ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
500 | pmac_ide_set_pio_mode(ide_drive_t *drive, const u8 pio) | ||
501 | { | 500 | { |
502 | ide_hwif_t *hwif = drive->hwif; | ||
503 | pmac_ide_hwif_t *pmif = | 501 | pmac_ide_hwif_t *pmif = |
504 | (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); | 502 | (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); |
503 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
505 | struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); | 504 | struct ide_timing *tim = ide_timing_find_mode(XFER_PIO_0 + pio); |
506 | u32 *timings, t; | 505 | u32 *timings, t; |
507 | unsigned accessTicks, recTicks; | 506 | unsigned accessTicks, recTicks; |
@@ -778,14 +777,14 @@ set_timings_mdma(ide_drive_t *drive, int intf_type, u32 *timings, u32 *timings2, | |||
778 | #endif | 777 | #endif |
779 | } | 778 | } |
780 | 779 | ||
781 | static void pmac_ide_set_dma_mode(ide_drive_t *drive, const u8 speed) | 780 | static void pmac_ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
782 | { | 781 | { |
783 | ide_hwif_t *hwif = drive->hwif; | ||
784 | pmac_ide_hwif_t *pmif = | 782 | pmac_ide_hwif_t *pmif = |
785 | (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); | 783 | (pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent); |
786 | int ret = 0; | 784 | int ret = 0; |
787 | u32 *timings, *timings2, tl[2]; | 785 | u32 *timings, *timings2, tl[2]; |
788 | u8 unit = drive->dn & 1; | 786 | u8 unit = drive->dn & 1; |
787 | const u8 speed = drive->dma_mode; | ||
789 | 788 | ||
790 | timings = &pmif->timings[unit]; | 789 | timings = &pmif->timings[unit]; |
791 | timings2 = &pmif->timings[unit+2]; | 790 | timings2 = &pmif->timings[unit+2]; |
@@ -1651,8 +1650,8 @@ pmac_ide_dma_test_irq (ide_drive_t *drive) | |||
1651 | if ((status & FLUSH) == 0) | 1650 | if ((status & FLUSH) == 0) |
1652 | break; | 1651 | break; |
1653 | if (++timeout > 100) { | 1652 | if (++timeout > 100) { |
1654 | printk(KERN_WARNING "ide%d, ide_dma_test_irq \ | 1653 | printk(KERN_WARNING "ide%d, ide_dma_test_irq timeout flushing channel\n", |
1655 | timeout flushing channel\n", hwif->index); | 1654 | hwif->index); |
1656 | break; | 1655 | break; |
1657 | } | 1656 | } |
1658 | } | 1657 | } |
diff --git a/drivers/ide/qd65xx.c b/drivers/ide/qd65xx.c index 74696edc8d1d..3f0244fd8e62 100644 --- a/drivers/ide/qd65xx.c +++ b/drivers/ide/qd65xx.c | |||
@@ -189,15 +189,13 @@ static void qd_set_timing (ide_drive_t *drive, u8 timing) | |||
189 | printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); | 189 | printk(KERN_DEBUG "%s: %#x\n", drive->name, timing); |
190 | } | 190 | } |
191 | 191 | ||
192 | static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) | 192 | static void qd6500_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
193 | { | 193 | { |
194 | u16 *id = drive->id; | 194 | u16 *id = drive->id; |
195 | int active_time = 175; | 195 | int active_time = 175; |
196 | int recovery_time = 415; /* worst case values from the dos driver */ | 196 | int recovery_time = 415; /* worst case values from the dos driver */ |
197 | 197 | ||
198 | /* | 198 | /* FIXME: use drive->pio_mode value */ |
199 | * FIXME: use "pio" value | ||
200 | */ | ||
201 | if (!qd_find_disk_type(drive, &active_time, &recovery_time) && | 199 | if (!qd_find_disk_type(drive, &active_time, &recovery_time) && |
202 | (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) && | 200 | (id[ATA_ID_OLD_PIO_MODES] & 0xff) && (id[ATA_ID_FIELD_VALID] & 2) && |
203 | id[ATA_ID_EIDE_PIO] >= 240) { | 201 | id[ATA_ID_EIDE_PIO] >= 240) { |
@@ -211,9 +209,9 @@ static void qd6500_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
211 | active_time, recovery_time)); | 209 | active_time, recovery_time)); |
212 | } | 210 | } |
213 | 211 | ||
214 | static void qd6580_set_pio_mode(ide_drive_t *drive, const u8 pio) | 212 | static void qd6580_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
215 | { | 213 | { |
216 | ide_hwif_t *hwif = drive->hwif; | 214 | const u8 pio = drive->pio_mode - XFER_PIO_0; |
217 | struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); | 215 | struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio); |
218 | unsigned int cycle_time; | 216 | unsigned int cycle_time; |
219 | int active_time = 175; | 217 | int active_time = 175; |
diff --git a/drivers/ide/sc1200.c b/drivers/ide/sc1200.c index d467478d68da..134f1fd13866 100644 --- a/drivers/ide/sc1200.c +++ b/drivers/ide/sc1200.c | |||
@@ -122,13 +122,13 @@ out: | |||
122 | return mask; | 122 | return mask; |
123 | } | 123 | } |
124 | 124 | ||
125 | static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode) | 125 | static void sc1200_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
126 | { | 126 | { |
127 | ide_hwif_t *hwif = drive->hwif; | ||
128 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 127 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
129 | unsigned int reg, timings; | 128 | unsigned int reg, timings; |
130 | unsigned short pci_clock; | 129 | unsigned short pci_clock; |
131 | unsigned int basereg = hwif->channel ? 0x50 : 0x40; | 130 | unsigned int basereg = hwif->channel ? 0x50 : 0x40; |
131 | const u8 mode = drive->dma_mode; | ||
132 | 132 | ||
133 | static const u32 udma_timing[3][3] = { | 133 | static const u32 udma_timing[3][3] = { |
134 | { 0x00921250, 0x00911140, 0x00911030 }, | 134 | { 0x00921250, 0x00911140, 0x00911030 }, |
@@ -193,10 +193,10 @@ static int sc1200_dma_end(ide_drive_t *drive) | |||
193 | * will have valid default PIO timings set up before we get here. | 193 | * will have valid default PIO timings set up before we get here. |
194 | */ | 194 | */ |
195 | 195 | ||
196 | static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio) | 196 | static void sc1200_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
197 | { | 197 | { |
198 | ide_hwif_t *hwif = drive->hwif; | ||
199 | int mode = -1; | 198 | int mode = -1; |
199 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
200 | 200 | ||
201 | /* | 201 | /* |
202 | * bad abuse of ->set_pio_mode interface | 202 | * bad abuse of ->set_pio_mode interface |
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c index 1104bb301eb9..b7f5b0c4310c 100644 --- a/drivers/ide/scc_pata.c +++ b/drivers/ide/scc_pata.c | |||
@@ -199,16 +199,15 @@ scc_ide_outsl(unsigned long port, void *addr, u32 count) | |||
199 | 199 | ||
200 | /** | 200 | /** |
201 | * scc_set_pio_mode - set host controller for PIO mode | 201 | * scc_set_pio_mode - set host controller for PIO mode |
202 | * @hwif: port | ||
202 | * @drive: drive | 203 | * @drive: drive |
203 | * @pio: PIO mode number | ||
204 | * | 204 | * |
205 | * Load the timing settings for this device mode into the | 205 | * Load the timing settings for this device mode into the |
206 | * controller. | 206 | * controller. |
207 | */ | 207 | */ |
208 | 208 | ||
209 | static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) | 209 | static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
210 | { | 210 | { |
211 | ide_hwif_t *hwif = drive->hwif; | ||
212 | struct scc_ports *ports = ide_get_hwifdata(hwif); | 211 | struct scc_ports *ports = ide_get_hwifdata(hwif); |
213 | unsigned long ctl_base = ports->ctl; | 212 | unsigned long ctl_base = ports->ctl; |
214 | unsigned long cckctrl_port = ctl_base + 0xff0; | 213 | unsigned long cckctrl_port = ctl_base + 0xff0; |
@@ -216,6 +215,7 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
216 | unsigned long pioct_port = ctl_base + 0x004; | 215 | unsigned long pioct_port = ctl_base + 0x004; |
217 | unsigned long reg; | 216 | unsigned long reg; |
218 | int offset; | 217 | int offset; |
218 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
219 | 219 | ||
220 | reg = in_be32((void __iomem *)cckctrl_port); | 220 | reg = in_be32((void __iomem *)cckctrl_port); |
221 | if (reg & CCKCTRL_ATACLKOEN) { | 221 | if (reg & CCKCTRL_ATACLKOEN) { |
@@ -231,16 +231,15 @@ static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
231 | 231 | ||
232 | /** | 232 | /** |
233 | * scc_set_dma_mode - set host controller for DMA mode | 233 | * scc_set_dma_mode - set host controller for DMA mode |
234 | * @hwif: port | ||
234 | * @drive: drive | 235 | * @drive: drive |
235 | * @speed: DMA mode | ||
236 | * | 236 | * |
237 | * Load the timing settings for this device mode into the | 237 | * Load the timing settings for this device mode into the |
238 | * controller. | 238 | * controller. |
239 | */ | 239 | */ |
240 | 240 | ||
241 | static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) | 241 | static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
242 | { | 242 | { |
243 | ide_hwif_t *hwif = drive->hwif; | ||
244 | struct scc_ports *ports = ide_get_hwifdata(hwif); | 243 | struct scc_ports *ports = ide_get_hwifdata(hwif); |
245 | unsigned long ctl_base = ports->ctl; | 244 | unsigned long ctl_base = ports->ctl; |
246 | unsigned long cckctrl_port = ctl_base + 0xff0; | 245 | unsigned long cckctrl_port = ctl_base + 0xff0; |
@@ -254,6 +253,7 @@ static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
254 | int offset, idx; | 253 | int offset, idx; |
255 | unsigned long reg; | 254 | unsigned long reg; |
256 | unsigned long jcactsel; | 255 | unsigned long jcactsel; |
256 | const u8 speed = drive->dma_mode; | ||
257 | 257 | ||
258 | reg = in_be32((void __iomem *)cckctrl_port); | 258 | reg = in_be32((void __iomem *)cckctrl_port); |
259 | if (reg & CCKCTRL_ATACLKOEN) { | 259 | if (reg & CCKCTRL_ATACLKOEN) { |
@@ -872,20 +872,18 @@ static struct pci_driver scc_pci_driver = { | |||
872 | .remove = __devexit_p(scc_remove), | 872 | .remove = __devexit_p(scc_remove), |
873 | }; | 873 | }; |
874 | 874 | ||
875 | static int scc_ide_init(void) | 875 | static int __init scc_ide_init(void) |
876 | { | 876 | { |
877 | return ide_pci_register_driver(&scc_pci_driver); | 877 | return ide_pci_register_driver(&scc_pci_driver); |
878 | } | 878 | } |
879 | 879 | ||
880 | module_init(scc_ide_init); | 880 | static void __exit scc_ide_exit(void) |
881 | /* -- No exit code? | ||
882 | static void scc_ide_exit(void) | ||
883 | { | 881 | { |
884 | ide_pci_unregister_driver(&scc_pci_driver); | 882 | pci_unregister_driver(&scc_pci_driver); |
885 | } | 883 | } |
886 | module_exit(scc_ide_exit); | ||
887 | */ | ||
888 | 884 | ||
885 | module_init(scc_ide_init); | ||
886 | module_exit(scc_ide_exit); | ||
889 | 887 | ||
890 | MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); | 888 | MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE"); |
891 | MODULE_LICENSE("GPL"); | 889 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/ide/serverworks.c b/drivers/ide/serverworks.c index b6554ef92716..35fb8dabb55d 100644 --- a/drivers/ide/serverworks.c +++ b/drivers/ide/serverworks.c | |||
@@ -2,7 +2,7 @@ | |||
2 | * Copyright (C) 1998-2000 Michel Aubry | 2 | * Copyright (C) 1998-2000 Michel Aubry |
3 | * Copyright (C) 1998-2000 Andrzej Krzysztofowicz | 3 | * Copyright (C) 1998-2000 Andrzej Krzysztofowicz |
4 | * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> | 4 | * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org> |
5 | * Copyright (C) 2007 Bartlomiej Zolnierkiewicz | 5 | * Copyright (C) 2007-2010 Bartlomiej Zolnierkiewicz |
6 | * Portions copyright (c) 2001 Sun Microsystems | 6 | * Portions copyright (c) 2001 Sun Microsystems |
7 | * | 7 | * |
8 | * | 8 | * |
@@ -52,8 +52,6 @@ static const char *svwks_bad_ata100[] = { | |||
52 | NULL | 52 | NULL |
53 | }; | 53 | }; |
54 | 54 | ||
55 | static struct pci_dev *isa_dev; | ||
56 | |||
57 | static int check_in_drive_lists (ide_drive_t *drive, const char **list) | 55 | static int check_in_drive_lists (ide_drive_t *drive, const char **list) |
58 | { | 56 | { |
59 | char *m = (char *)&drive->id[ATA_ID_PROD]; | 57 | char *m = (char *)&drive->id[ATA_ID_PROD]; |
@@ -67,26 +65,14 @@ static int check_in_drive_lists (ide_drive_t *drive, const char **list) | |||
67 | static u8 svwks_udma_filter(ide_drive_t *drive) | 65 | static u8 svwks_udma_filter(ide_drive_t *drive) |
68 | { | 66 | { |
69 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); | 67 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); |
70 | u8 mask = 0; | ||
71 | 68 | ||
72 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) | 69 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) { |
73 | return 0x1f; | 70 | return 0x1f; |
74 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { | ||
75 | u32 reg = 0; | ||
76 | if (isa_dev) | ||
77 | pci_read_config_dword(isa_dev, 0x64, ®); | ||
78 | |||
79 | /* | ||
80 | * Don't enable UDMA on disk devices for the moment | ||
81 | */ | ||
82 | if(drive->media == ide_disk) | ||
83 | return 0; | ||
84 | /* Check the OSB4 DMA33 enable bit */ | ||
85 | return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0; | ||
86 | } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { | 71 | } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) { |
87 | return 0x07; | 72 | return 0x07; |
88 | } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) { | 73 | } else { |
89 | u8 btr = 0, mode; | 74 | u8 btr = 0, mode, mask; |
75 | |||
90 | pci_read_config_byte(dev, 0x5A, &btr); | 76 | pci_read_config_byte(dev, 0x5A, &btr); |
91 | mode = btr & 0x3; | 77 | mode = btr & 0x3; |
92 | 78 | ||
@@ -101,13 +87,9 @@ static u8 svwks_udma_filter(ide_drive_t *drive) | |||
101 | case 1: mask = 0x07; break; | 87 | case 1: mask = 0x07; break; |
102 | default: mask = 0x00; break; | 88 | default: mask = 0x00; break; |
103 | } | 89 | } |
104 | } | ||
105 | if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) || | ||
106 | (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) && | ||
107 | (!(PCI_FUNC(dev->devfn) & 1))) | ||
108 | mask = 0x1f; | ||
109 | 90 | ||
110 | return mask; | 91 | return mask; |
92 | } | ||
111 | } | 93 | } |
112 | 94 | ||
113 | static u8 svwks_csb_check (struct pci_dev *dev) | 95 | static u8 svwks_csb_check (struct pci_dev *dev) |
@@ -124,12 +106,13 @@ static u8 svwks_csb_check (struct pci_dev *dev) | |||
124 | return 0; | 106 | return 0; |
125 | } | 107 | } |
126 | 108 | ||
127 | static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) | 109 | static void svwks_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
128 | { | 110 | { |
129 | static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; | 111 | static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 }; |
130 | static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; | 112 | static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 }; |
131 | 113 | ||
132 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); | 114 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
115 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
133 | 116 | ||
134 | pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]); | 117 | pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]); |
135 | 118 | ||
@@ -145,14 +128,14 @@ static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
145 | } | 128 | } |
146 | } | 129 | } |
147 | 130 | ||
148 | static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed) | 131 | static void svwks_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
149 | { | 132 | { |
150 | static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; | 133 | static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 }; |
151 | static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; | 134 | static const u8 dma_modes[] = { 0x77, 0x21, 0x20 }; |
152 | static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; | 135 | static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 }; |
153 | 136 | ||
154 | ide_hwif_t *hwif = drive->hwif; | ||
155 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 137 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
138 | const u8 speed = drive->dma_mode; | ||
156 | u8 unit = drive->dn & 1; | 139 | u8 unit = drive->dn & 1; |
157 | 140 | ||
158 | u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; | 141 | u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0; |
@@ -185,8 +168,9 @@ static int init_chipset_svwks(struct pci_dev *dev) | |||
185 | 168 | ||
186 | /* OSB4 : South Bridge and IDE */ | 169 | /* OSB4 : South Bridge and IDE */ |
187 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { | 170 | if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) { |
188 | isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS, | 171 | struct pci_dev *isa_dev = |
189 | PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); | 172 | pci_get_device(PCI_VENDOR_ID_SERVERWORKS, |
173 | PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL); | ||
190 | if (isa_dev) { | 174 | if (isa_dev) { |
191 | pci_read_config_dword(isa_dev, 0x64, ®); | 175 | pci_read_config_dword(isa_dev, 0x64, ®); |
192 | reg &= ~0x00002000; /* disable 600ns interrupt mask */ | 176 | reg &= ~0x00002000; /* disable 600ns interrupt mask */ |
@@ -195,6 +179,7 @@ static int init_chipset_svwks(struct pci_dev *dev) | |||
195 | "enabled.\n", pci_name(dev)); | 179 | "enabled.\n", pci_name(dev)); |
196 | reg |= 0x00004000; /* enable UDMA/33 support */ | 180 | reg |= 0x00004000; /* enable UDMA/33 support */ |
197 | pci_write_config_dword(isa_dev, 0x64, reg); | 181 | pci_write_config_dword(isa_dev, 0x64, reg); |
182 | pci_dev_put(isa_dev); | ||
198 | } | 183 | } |
199 | } | 184 | } |
200 | 185 | ||
@@ -343,7 +328,6 @@ static u8 svwks_cable_detect(ide_hwif_t *hwif) | |||
343 | static const struct ide_port_ops osb4_port_ops = { | 328 | static const struct ide_port_ops osb4_port_ops = { |
344 | .set_pio_mode = svwks_set_pio_mode, | 329 | .set_pio_mode = svwks_set_pio_mode, |
345 | .set_dma_mode = svwks_set_dma_mode, | 330 | .set_dma_mode = svwks_set_dma_mode, |
346 | .udma_filter = svwks_udma_filter, | ||
347 | }; | 331 | }; |
348 | 332 | ||
349 | static const struct ide_port_ops svwks_port_ops = { | 333 | static const struct ide_port_ops svwks_port_ops = { |
@@ -460,6 +444,6 @@ static void __exit svwks_ide_exit(void) | |||
460 | module_init(svwks_ide_init); | 444 | module_init(svwks_ide_init); |
461 | module_exit(svwks_ide_exit); | 445 | module_exit(svwks_ide_exit); |
462 | 446 | ||
463 | MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick"); | 447 | MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick, Bartlomiej Zolnierkiewicz"); |
464 | MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE"); | 448 | MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE"); |
465 | MODULE_LICENSE("GPL"); | 449 | MODULE_LICENSE("GPL"); |
diff --git a/drivers/ide/sgiioc4.c b/drivers/ide/sgiioc4.c index b7d61dc64096..e3ea591f66d3 100644 --- a/drivers/ide/sgiioc4.c +++ b/drivers/ide/sgiioc4.c | |||
@@ -255,7 +255,7 @@ static int sgiioc4_dma_end(ide_drive_t *drive) | |||
255 | return dma_stat; | 255 | return dma_stat; |
256 | } | 256 | } |
257 | 257 | ||
258 | static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed) | 258 | static void sgiioc4_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
259 | { | 259 | { |
260 | } | 260 | } |
261 | 261 | ||
diff --git a/drivers/ide/siimage.c b/drivers/ide/siimage.c index d95df528562f..ddeda444a27a 100644 --- a/drivers/ide/siimage.c +++ b/drivers/ide/siimage.c | |||
@@ -229,19 +229,18 @@ static u8 sil_sata_udma_filter(ide_drive_t *drive) | |||
229 | 229 | ||
230 | /** | 230 | /** |
231 | * sil_set_pio_mode - set host controller for PIO mode | 231 | * sil_set_pio_mode - set host controller for PIO mode |
232 | * @hwif: port | ||
232 | * @drive: drive | 233 | * @drive: drive |
233 | * @pio: PIO mode number | ||
234 | * | 234 | * |
235 | * Load the timing settings for this device mode into the | 235 | * Load the timing settings for this device mode into the |
236 | * controller. | 236 | * controller. |
237 | */ | 237 | */ |
238 | 238 | ||
239 | static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) | 239 | static void sil_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
240 | { | 240 | { |
241 | static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; | 241 | static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 }; |
242 | static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; | 242 | static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 }; |
243 | 243 | ||
244 | ide_hwif_t *hwif = drive->hwif; | ||
245 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 244 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
246 | ide_drive_t *pair = ide_get_pair_dev(drive); | 245 | ide_drive_t *pair = ide_get_pair_dev(drive); |
247 | u32 speedt = 0; | 246 | u32 speedt = 0; |
@@ -249,6 +248,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) | |||
249 | unsigned long addr = siimage_seldev(drive, 0x04); | 248 | unsigned long addr = siimage_seldev(drive, 0x04); |
250 | unsigned long tfaddr = siimage_selreg(hwif, 0x02); | 249 | unsigned long tfaddr = siimage_selreg(hwif, 0x02); |
251 | unsigned long base = (unsigned long)hwif->hwif_data; | 250 | unsigned long base = (unsigned long)hwif->hwif_data; |
251 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
252 | u8 tf_pio = pio; | 252 | u8 tf_pio = pio; |
253 | u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; | 253 | u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0; |
254 | u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) | 254 | u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84) |
@@ -258,7 +258,7 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) | |||
258 | 258 | ||
259 | /* trim *taskfile* PIO to the slowest of the master/slave */ | 259 | /* trim *taskfile* PIO to the slowest of the master/slave */ |
260 | if (pair) { | 260 | if (pair) { |
261 | u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4); | 261 | u8 pair_pio = pair->pio_mode - XFER_PIO_0; |
262 | 262 | ||
263 | if (pair_pio < tf_pio) | 263 | if (pair_pio < tf_pio) |
264 | tf_pio = pair_pio; | 264 | tf_pio = pair_pio; |
@@ -289,19 +289,18 @@ static void sil_set_pio_mode(ide_drive_t *drive, u8 pio) | |||
289 | 289 | ||
290 | /** | 290 | /** |
291 | * sil_set_dma_mode - set host controller for DMA mode | 291 | * sil_set_dma_mode - set host controller for DMA mode |
292 | * @hwif: port | ||
292 | * @drive: drive | 293 | * @drive: drive |
293 | * @speed: DMA mode | ||
294 | * | 294 | * |
295 | * Tune the SiI chipset for the desired DMA mode. | 295 | * Tune the SiI chipset for the desired DMA mode. |
296 | */ | 296 | */ |
297 | 297 | ||
298 | static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) | 298 | static void sil_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
299 | { | 299 | { |
300 | static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; | 300 | static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 }; |
301 | static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; | 301 | static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 }; |
302 | static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; | 302 | static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 }; |
303 | 303 | ||
304 | ide_hwif_t *hwif = drive->hwif; | ||
305 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 304 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
306 | unsigned long base = (unsigned long)hwif->hwif_data; | 305 | unsigned long base = (unsigned long)hwif->hwif_data; |
307 | u16 ultra = 0, multi = 0; | 306 | u16 ultra = 0, multi = 0; |
@@ -311,6 +310,7 @@ static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
311 | : (mmio ? 0xB4 : 0x80); | 310 | : (mmio ? 0xB4 : 0x80); |
312 | unsigned long ma = siimage_seldev(drive, 0x08); | 311 | unsigned long ma = siimage_seldev(drive, 0x08); |
313 | unsigned long ua = siimage_seldev(drive, 0x0C); | 312 | unsigned long ua = siimage_seldev(drive, 0x0C); |
313 | const u8 speed = drive->dma_mode; | ||
314 | 314 | ||
315 | scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); | 315 | scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A)); |
316 | mode = sil_ioread8 (dev, base + addr_mask); | 316 | mode = sil_ioread8 (dev, base + addr_mask); |
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c index 468706082fb5..db7f4e761dbc 100644 --- a/drivers/ide/sis5513.c +++ b/drivers/ide/sis5513.c | |||
@@ -290,10 +290,10 @@ static void config_drive_art_rwp(ide_drive_t *drive) | |||
290 | pci_write_config_byte(dev, 0x4b, rw_prefetch); | 290 | pci_write_config_byte(dev, 0x4b, rw_prefetch); |
291 | } | 291 | } |
292 | 292 | ||
293 | static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio) | 293 | static void sis_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
294 | { | 294 | { |
295 | config_drive_art_rwp(drive); | 295 | config_drive_art_rwp(drive); |
296 | sis_program_timings(drive, XFER_PIO_0 + pio); | 296 | sis_program_timings(drive, drive->pio_mode); |
297 | } | 297 | } |
298 | 298 | ||
299 | static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) | 299 | static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode) |
@@ -340,8 +340,10 @@ static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode) | |||
340 | sis_ata33_program_udma_timings(drive, mode); | 340 | sis_ata33_program_udma_timings(drive, mode); |
341 | } | 341 | } |
342 | 342 | ||
343 | static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed) | 343 | static void sis_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
344 | { | 344 | { |
345 | const u8 speed = drive->dma_mode; | ||
346 | |||
345 | if (speed >= XFER_UDMA_0) | 347 | if (speed >= XFER_UDMA_0) |
346 | sis_program_udma_timings(drive, speed); | 348 | sis_program_udma_timings(drive, speed); |
347 | else | 349 | else |
diff --git a/drivers/ide/sl82c105.c b/drivers/ide/sl82c105.c index 3c2bbf0057ea..f21dc2ad7682 100644 --- a/drivers/ide/sl82c105.c +++ b/drivers/ide/sl82c105.c | |||
@@ -63,12 +63,13 @@ static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio) | |||
63 | /* | 63 | /* |
64 | * Configure the chipset for PIO mode. | 64 | * Configure the chipset for PIO mode. |
65 | */ | 65 | */ |
66 | static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) | 66 | static void sl82c105_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
67 | { | 67 | { |
68 | struct pci_dev *dev = to_pci_dev(drive->hwif->dev); | 68 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
69 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); | 69 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); |
70 | int reg = 0x44 + drive->dn * 4; | 70 | int reg = 0x44 + drive->dn * 4; |
71 | u16 drv_ctrl; | 71 | u16 drv_ctrl; |
72 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
72 | 73 | ||
73 | drv_ctrl = get_pio_timings(drive, pio); | 74 | drv_ctrl = get_pio_timings(drive, pio); |
74 | 75 | ||
@@ -91,11 +92,12 @@ static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
91 | /* | 92 | /* |
92 | * Configure the chipset for DMA mode. | 93 | * Configure the chipset for DMA mode. |
93 | */ | 94 | */ |
94 | static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed) | 95 | static void sl82c105_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
95 | { | 96 | { |
96 | static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; | 97 | static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200}; |
97 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); | 98 | unsigned long timings = (unsigned long)ide_get_drivedata(drive); |
98 | u16 drv_ctrl; | 99 | u16 drv_ctrl; |
100 | const u8 speed = drive->dma_mode; | ||
99 | 101 | ||
100 | drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; | 102 | drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0]; |
101 | 103 | ||
diff --git a/drivers/ide/slc90e66.c b/drivers/ide/slc90e66.c index 1ccfb40e7215..864ffe0e26d9 100644 --- a/drivers/ide/slc90e66.c +++ b/drivers/ide/slc90e66.c | |||
@@ -18,9 +18,8 @@ | |||
18 | 18 | ||
19 | static DEFINE_SPINLOCK(slc90e66_lock); | 19 | static DEFINE_SPINLOCK(slc90e66_lock); |
20 | 20 | ||
21 | static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) | 21 | static void slc90e66_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
22 | { | 22 | { |
23 | ide_hwif_t *hwif = drive->hwif; | ||
24 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 23 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
25 | int is_slave = drive->dn & 1; | 24 | int is_slave = drive->dn & 1; |
26 | int master_port = hwif->channel ? 0x42 : 0x40; | 25 | int master_port = hwif->channel ? 0x42 : 0x40; |
@@ -29,6 +28,8 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
29 | u16 master_data; | 28 | u16 master_data; |
30 | u8 slave_data; | 29 | u8 slave_data; |
31 | int control = 0; | 30 | int control = 0; |
31 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
32 | |||
32 | /* ISP RTC */ | 33 | /* ISP RTC */ |
33 | static const u8 timings[][2] = { | 34 | static const u8 timings[][2] = { |
34 | { 0, 0 }, | 35 | { 0, 0 }, |
@@ -71,14 +72,14 @@ static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
71 | spin_unlock_irqrestore(&slc90e66_lock, flags); | 72 | spin_unlock_irqrestore(&slc90e66_lock, flags); |
72 | } | 73 | } |
73 | 74 | ||
74 | static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) | 75 | static void slc90e66_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
75 | { | 76 | { |
76 | ide_hwif_t *hwif = drive->hwif; | ||
77 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 77 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
78 | u8 maslave = hwif->channel ? 0x42 : 0x40; | 78 | u8 maslave = hwif->channel ? 0x42 : 0x40; |
79 | int sitre = 0, a_speed = 7 << (drive->dn * 4); | 79 | int sitre = 0, a_speed = 7 << (drive->dn * 4); |
80 | int u_speed = 0, u_flag = 1 << drive->dn; | 80 | int u_speed = 0, u_flag = 1 << drive->dn; |
81 | u16 reg4042, reg44, reg48, reg4a; | 81 | u16 reg4042, reg44, reg48, reg4a; |
82 | const u8 speed = drive->dma_mode; | ||
82 | 83 | ||
83 | pci_read_config_word(dev, maslave, ®4042); | 84 | pci_read_config_word(dev, maslave, ®4042); |
84 | sitre = (reg4042 & 0x4000) ? 1 : 0; | 85 | sitre = (reg4042 & 0x4000) ? 1 : 0; |
@@ -98,7 +99,6 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
98 | } | 99 | } |
99 | } else { | 100 | } else { |
100 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; | 101 | const u8 mwdma_to_pio[] = { 0, 3, 4 }; |
101 | u8 pio; | ||
102 | 102 | ||
103 | if (reg48 & u_flag) | 103 | if (reg48 & u_flag) |
104 | pci_write_config_word(dev, 0x48, reg48 & ~u_flag); | 104 | pci_write_config_word(dev, 0x48, reg48 & ~u_flag); |
@@ -106,11 +106,12 @@ static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed) | |||
106 | pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); | 106 | pci_write_config_word(dev, 0x4a, reg4a & ~a_speed); |
107 | 107 | ||
108 | if (speed >= XFER_MW_DMA_0) | 108 | if (speed >= XFER_MW_DMA_0) |
109 | pio = mwdma_to_pio[speed - XFER_MW_DMA_0]; | 109 | drive->pio_mode = |
110 | mwdma_to_pio[speed - XFER_MW_DMA_0] + XFER_PIO_0; | ||
110 | else | 111 | else |
111 | pio = 2; /* only SWDMA2 is allowed */ | 112 | drive->pio_mode = XFER_PIO_2; /* for SWDMA2 */ |
112 | 113 | ||
113 | slc90e66_set_pio_mode(drive, pio); | 114 | slc90e66_set_pio_mode(hwif, drive); |
114 | } | 115 | } |
115 | } | 116 | } |
116 | 117 | ||
diff --git a/drivers/ide/tc86c001.c b/drivers/ide/tc86c001.c index 05a93d6baecc..e444d24934b3 100644 --- a/drivers/ide/tc86c001.c +++ b/drivers/ide/tc86c001.c | |||
@@ -13,11 +13,11 @@ | |||
13 | 13 | ||
14 | #define DRV_NAME "tc86c001" | 14 | #define DRV_NAME "tc86c001" |
15 | 15 | ||
16 | static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) | 16 | static void tc86c001_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
17 | { | 17 | { |
18 | ide_hwif_t *hwif = drive->hwif; | ||
19 | unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); | 18 | unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00); |
20 | u16 mode, scr = inw(scr_port); | 19 | u16 mode, scr = inw(scr_port); |
20 | const u8 speed = drive->dma_mode; | ||
21 | 21 | ||
22 | switch (speed) { | 22 | switch (speed) { |
23 | case XFER_UDMA_4: mode = 0x00c0; break; | 23 | case XFER_UDMA_4: mode = 0x00c0; break; |
@@ -41,9 +41,10 @@ static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed) | |||
41 | outw(scr, scr_port); | 41 | outw(scr, scr_port); |
42 | } | 42 | } |
43 | 43 | ||
44 | static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio) | 44 | static void tc86c001_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
45 | { | 45 | { |
46 | tc86c001_set_mode(drive, XFER_PIO_0 + pio); | 46 | drive->dma_mode = drive->pio_mode; |
47 | tc86c001_set_mode(hwif, drive); | ||
47 | } | 48 | } |
48 | 49 | ||
49 | /* | 50 | /* |
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c index 8773c3ba7462..7953447eae0f 100644 --- a/drivers/ide/triflex.c +++ b/drivers/ide/triflex.c | |||
@@ -34,9 +34,8 @@ | |||
34 | 34 | ||
35 | #define DRV_NAME "triflex" | 35 | #define DRV_NAME "triflex" |
36 | 36 | ||
37 | static void triflex_set_mode(ide_drive_t *drive, const u8 speed) | 37 | static void triflex_set_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
38 | { | 38 | { |
39 | ide_hwif_t *hwif = drive->hwif; | ||
40 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 39 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
41 | u32 triflex_timings = 0; | 40 | u32 triflex_timings = 0; |
42 | u16 timing = 0; | 41 | u16 timing = 0; |
@@ -44,7 +43,7 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) | |||
44 | 43 | ||
45 | pci_read_config_dword(dev, channel_offset, &triflex_timings); | 44 | pci_read_config_dword(dev, channel_offset, &triflex_timings); |
46 | 45 | ||
47 | switch(speed) { | 46 | switch (drive->dma_mode) { |
48 | case XFER_MW_DMA_2: | 47 | case XFER_MW_DMA_2: |
49 | timing = 0x0103; | 48 | timing = 0x0103; |
50 | break; | 49 | break; |
@@ -82,9 +81,10 @@ static void triflex_set_mode(ide_drive_t *drive, const u8 speed) | |||
82 | pci_write_config_dword(dev, channel_offset, triflex_timings); | 81 | pci_write_config_dword(dev, channel_offset, triflex_timings); |
83 | } | 82 | } |
84 | 83 | ||
85 | static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio) | 84 | static void triflex_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
86 | { | 85 | { |
87 | triflex_set_mode(drive, XFER_PIO_0 + pio); | 86 | drive->dma_mode = drive->pio_mode; |
87 | triflex_set_mode(hwif, drive); | ||
88 | } | 88 | } |
89 | 89 | ||
90 | static const struct ide_port_ops triflex_port_ops = { | 90 | static const struct ide_port_ops triflex_port_ops = { |
diff --git a/drivers/ide/tx4938ide.c b/drivers/ide/tx4938ide.c index fd59c0d235b5..1d80f1fdbc97 100644 --- a/drivers/ide/tx4938ide.c +++ b/drivers/ide/tx4938ide.c | |||
@@ -56,16 +56,15 @@ static void tx4938ide_tune_ebusc(unsigned int ebus_ch, | |||
56 | &tx4938_ebuscptr->cr[ebus_ch]); | 56 | &tx4938_ebuscptr->cr[ebus_ch]); |
57 | } | 57 | } |
58 | 58 | ||
59 | static void tx4938ide_set_pio_mode(ide_drive_t *drive, const u8 pio) | 59 | static void tx4938ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
60 | { | 60 | { |
61 | ide_hwif_t *hwif = drive->hwif; | ||
62 | struct tx4938ide_platform_info *pdata = hwif->dev->platform_data; | 61 | struct tx4938ide_platform_info *pdata = hwif->dev->platform_data; |
63 | u8 safe = pio; | 62 | u8 safe = drive->pio_mode - XFER_PIO_0; |
64 | ide_drive_t *pair; | 63 | ide_drive_t *pair; |
65 | 64 | ||
66 | pair = ide_get_pair_dev(drive); | 65 | pair = ide_get_pair_dev(drive); |
67 | if (pair) | 66 | if (pair) |
68 | safe = min(safe, ide_get_best_pio_mode(pair, 255, 5)); | 67 | safe = min(safe, pair->pio_mode - XFER_PIO_0); |
69 | tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); | 68 | tx4938ide_tune_ebusc(pdata->ebus_ch, pdata->gbus_clock, safe); |
70 | } | 69 | } |
71 | 70 | ||
diff --git a/drivers/ide/tx4939ide.c b/drivers/ide/tx4939ide.c index 64b58ecc3f0e..3c7367751873 100644 --- a/drivers/ide/tx4939ide.c +++ b/drivers/ide/tx4939ide.c | |||
@@ -104,17 +104,17 @@ static void tx4939ide_writeb(u8 val, void __iomem *base, u32 reg) | |||
104 | 104 | ||
105 | #define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base) | 105 | #define TX4939IDE_BASE(hwif) ((void __iomem *)(hwif)->extra_base) |
106 | 106 | ||
107 | static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) | 107 | static void tx4939ide_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
108 | { | 108 | { |
109 | ide_hwif_t *hwif = drive->hwif; | ||
110 | int is_slave = drive->dn; | 109 | int is_slave = drive->dn; |
111 | u32 mask, val; | 110 | u32 mask, val; |
111 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
112 | u8 safe = pio; | 112 | u8 safe = pio; |
113 | ide_drive_t *pair; | 113 | ide_drive_t *pair; |
114 | 114 | ||
115 | pair = ide_get_pair_dev(drive); | 115 | pair = ide_get_pair_dev(drive); |
116 | if (pair) | 116 | if (pair) |
117 | safe = min(safe, ide_get_best_pio_mode(pair, 255, 4)); | 117 | safe = min(safe, pair->pio_mode - XFER_PIO_0); |
118 | /* | 118 | /* |
119 | * Update Command Transfer Mode for master/slave and Data | 119 | * Update Command Transfer Mode for master/slave and Data |
120 | * Transfer Mode for this drive. | 120 | * Transfer Mode for this drive. |
@@ -125,10 +125,10 @@ static void tx4939ide_set_pio_mode(ide_drive_t *drive, const u8 pio) | |||
125 | /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */ | 125 | /* tx4939ide_tf_load_fixup() will set the Sys_Ctl register */ |
126 | } | 126 | } |
127 | 127 | ||
128 | static void tx4939ide_set_dma_mode(ide_drive_t *drive, const u8 mode) | 128 | static void tx4939ide_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
129 | { | 129 | { |
130 | ide_hwif_t *hwif = drive->hwif; | ||
131 | u32 mask, val; | 130 | u32 mask, val; |
131 | const u8 mode = drive->dma_mode; | ||
132 | 132 | ||
133 | /* Update Data Transfer Mode for this drive. */ | 133 | /* Update Data Transfer Mode for this drive. */ |
134 | if (mode >= XFER_UDMA_0) | 134 | if (mode >= XFER_UDMA_0) |
diff --git a/drivers/ide/umc8672.c b/drivers/ide/umc8672.c index 60f936e2319c..47adcd09cb26 100644 --- a/drivers/ide/umc8672.c +++ b/drivers/ide/umc8672.c | |||
@@ -104,10 +104,11 @@ static void umc_set_speeds(u8 speeds[]) | |||
104 | speeds[0], speeds[1], speeds[2], speeds[3]); | 104 | speeds[0], speeds[1], speeds[2], speeds[3]); |
105 | } | 105 | } |
106 | 106 | ||
107 | static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio) | 107 | static void umc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
108 | { | 108 | { |
109 | ide_hwif_t *hwif = drive->hwif, *mate = hwif->mate; | 109 | ide_hwif_t *mate = hwif->mate; |
110 | unsigned long uninitialized_var(flags); | 110 | unsigned long uninitialized_var(flags); |
111 | const u8 pio = drive->pio_mode - XFER_PIO_0; | ||
111 | 112 | ||
112 | printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", | 113 | printk("%s: setting umc8672 to PIO mode%d (speed %d)\n", |
113 | drive->name, pio, pio_to_umc[pio]); | 114 | drive->name, pio, pio_to_umc[pio]); |
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 028de26a25fe..e65d010b708d 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c | |||
@@ -6,7 +6,7 @@ | |||
6 | * vt8235, vt8237, vt8237a | 6 | * vt8235, vt8237, vt8237a |
7 | * | 7 | * |
8 | * Copyright (c) 2000-2002 Vojtech Pavlik | 8 | * Copyright (c) 2000-2002 Vojtech Pavlik |
9 | * Copyright (c) 2007 Bartlomiej Zolnierkiewicz | 9 | * Copyright (c) 2007-2010 Bartlomiej Zolnierkiewicz |
10 | * | 10 | * |
11 | * Based on the work of: | 11 | * Based on the work of: |
12 | * Michel Aubry | 12 | * Michel Aubry |
@@ -54,6 +54,11 @@ | |||
54 | #define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ | 54 | #define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ |
55 | #define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ | 55 | #define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ |
56 | #define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ | 56 | #define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ |
57 | #define VIA_SATA_PATA 0x80 /* SATA/PATA combined configuration */ | ||
58 | |||
59 | enum { | ||
60 | VIA_IDFLAG_SINGLE = (1 << 1), /* single channel controller */ | ||
61 | }; | ||
57 | 62 | ||
58 | /* | 63 | /* |
59 | * VIA SouthBridge chips. | 64 | * VIA SouthBridge chips. |
@@ -67,11 +72,13 @@ static struct via_isa_bridge { | |||
67 | u8 udma_mask; | 72 | u8 udma_mask; |
68 | u8 flags; | 73 | u8 flags; |
69 | } via_isa_bridges[] = { | 74 | } via_isa_bridges[] = { |
70 | { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 75 | { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
71 | { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 76 | { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
72 | { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 77 | { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
78 | { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | ||
73 | { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 79 | { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
74 | { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 80 | { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
81 | { "vt6415", PCI_DEVICE_ID_VIA_6410, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST }, | ||
75 | { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 82 | { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
76 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 83 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
77 | { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | 84 | { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
@@ -92,6 +99,7 @@ static struct via_isa_bridge { | |||
92 | { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, | 99 | { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, |
93 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, | 100 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, |
94 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, | 101 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, |
102 | { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, | ||
95 | { NULL } | 103 | { NULL } |
96 | }; | 104 | }; |
97 | 105 | ||
@@ -102,6 +110,7 @@ struct via82cxxx_dev | |||
102 | { | 110 | { |
103 | struct via_isa_bridge *via_config; | 111 | struct via_isa_bridge *via_config; |
104 | unsigned int via_80w; | 112 | unsigned int via_80w; |
113 | u8 cached_device[2]; | ||
105 | }; | 114 | }; |
106 | 115 | ||
107 | /** | 116 | /** |
@@ -137,30 +146,45 @@ static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) | |||
137 | case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; | 146 | case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; |
138 | case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; | 147 | case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; |
139 | case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; | 148 | case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; |
140 | default: return; | ||
141 | } | 149 | } |
142 | 150 | ||
143 | pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); | 151 | /* Set UDMA unless device is not UDMA capable */ |
152 | if (vdev->via_config->udma_mask) { | ||
153 | u8 udma_etc; | ||
154 | |||
155 | pci_read_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, &udma_etc); | ||
156 | |||
157 | /* clear transfer mode bit */ | ||
158 | udma_etc &= ~0x20; | ||
159 | |||
160 | if (timing->udma) { | ||
161 | /* preserve 80-wire cable detection bit */ | ||
162 | udma_etc &= 0x10; | ||
163 | udma_etc |= t; | ||
164 | } | ||
165 | |||
166 | pci_write_config_byte(dev, VIA_UDMA_TIMING + 3 - dn, udma_etc); | ||
167 | } | ||
144 | } | 168 | } |
145 | 169 | ||
146 | /** | 170 | /** |
147 | * via_set_drive - configure transfer mode | 171 | * via_set_drive - configure transfer mode |
172 | * @hwif: port | ||
148 | * @drive: Drive to set up | 173 | * @drive: Drive to set up |
149 | * @speed: desired speed | ||
150 | * | 174 | * |
151 | * via_set_drive() computes timing values configures the chipset to | 175 | * via_set_drive() computes timing values configures the chipset to |
152 | * a desired transfer mode. It also can be called by upper layers. | 176 | * a desired transfer mode. It also can be called by upper layers. |
153 | */ | 177 | */ |
154 | 178 | ||
155 | static void via_set_drive(ide_drive_t *drive, const u8 speed) | 179 | static void via_set_drive(ide_hwif_t *hwif, ide_drive_t *drive) |
156 | { | 180 | { |
157 | ide_hwif_t *hwif = drive->hwif; | ||
158 | ide_drive_t *peer = ide_get_pair_dev(drive); | 181 | ide_drive_t *peer = ide_get_pair_dev(drive); |
159 | struct pci_dev *dev = to_pci_dev(hwif->dev); | 182 | struct pci_dev *dev = to_pci_dev(hwif->dev); |
160 | struct ide_host *host = pci_get_drvdata(dev); | 183 | struct ide_host *host = pci_get_drvdata(dev); |
161 | struct via82cxxx_dev *vdev = host->host_priv; | 184 | struct via82cxxx_dev *vdev = host->host_priv; |
162 | struct ide_timing t, p; | 185 | struct ide_timing t, p; |
163 | unsigned int T, UT; | 186 | unsigned int T, UT; |
187 | const u8 speed = drive->dma_mode; | ||
164 | 188 | ||
165 | T = 1000000000 / via_clock; | 189 | T = 1000000000 / via_clock; |
166 | 190 | ||
@@ -175,7 +199,7 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) | |||
175 | ide_timing_compute(drive, speed, &t, T, UT); | 199 | ide_timing_compute(drive, speed, &t, T, UT); |
176 | 200 | ||
177 | if (peer) { | 201 | if (peer) { |
178 | ide_timing_compute(peer, peer->current_speed, &p, T, UT); | 202 | ide_timing_compute(peer, peer->pio_mode, &p, T, UT); |
179 | ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); | 203 | ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); |
180 | } | 204 | } |
181 | 205 | ||
@@ -184,22 +208,24 @@ static void via_set_drive(ide_drive_t *drive, const u8 speed) | |||
184 | 208 | ||
185 | /** | 209 | /** |
186 | * via_set_pio_mode - set host controller for PIO mode | 210 | * via_set_pio_mode - set host controller for PIO mode |
211 | * @hwif: port | ||
187 | * @drive: drive | 212 | * @drive: drive |
188 | * @pio: PIO mode number | ||
189 | * | 213 | * |
190 | * A callback from the upper layers for PIO-only tuning. | 214 | * A callback from the upper layers for PIO-only tuning. |
191 | */ | 215 | */ |
192 | 216 | ||
193 | static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) | 217 | static void via_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive) |
194 | { | 218 | { |
195 | via_set_drive(drive, XFER_PIO_0 + pio); | 219 | drive->dma_mode = drive->pio_mode; |
220 | via_set_drive(hwif, drive); | ||
196 | } | 221 | } |
197 | 222 | ||
198 | static struct via_isa_bridge *via_config_find(struct pci_dev **isa) | 223 | static struct via_isa_bridge *via_config_find(struct pci_dev **isa) |
199 | { | 224 | { |
200 | struct via_isa_bridge *via_config; | 225 | struct via_isa_bridge *via_config; |
201 | 226 | ||
202 | for (via_config = via_isa_bridges; via_config->id; via_config++) | 227 | for (via_config = via_isa_bridges; |
228 | via_config->id != PCI_DEVICE_ID_VIA_ANON; via_config++) | ||
203 | if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + | 229 | if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + |
204 | !!(via_config->flags & VIA_BAD_ID), | 230 | !!(via_config->flags & VIA_BAD_ID), |
205 | via_config->id, NULL))) { | 231 | via_config->id, NULL))) { |
@@ -362,6 +388,9 @@ static u8 via82cxxx_cable_detect(ide_hwif_t *hwif) | |||
362 | if (via_cable_override(pdev)) | 388 | if (via_cable_override(pdev)) |
363 | return ATA_CBL_PATA40_SHORT; | 389 | return ATA_CBL_PATA40_SHORT; |
364 | 390 | ||
391 | if ((vdev->via_config->flags & VIA_SATA_PATA) && hwif->channel == 0) | ||
392 | return ATA_CBL_SATA; | ||
393 | |||
365 | if ((vdev->via_80w >> hwif->channel) & 1) | 394 | if ((vdev->via_80w >> hwif->channel) & 1) |
366 | return ATA_CBL_PATA80; | 395 | return ATA_CBL_PATA80; |
367 | else | 396 | else |
@@ -374,10 +403,66 @@ static const struct ide_port_ops via_port_ops = { | |||
374 | .cable_detect = via82cxxx_cable_detect, | 403 | .cable_detect = via82cxxx_cable_detect, |
375 | }; | 404 | }; |
376 | 405 | ||
406 | static void via_write_devctl(ide_hwif_t *hwif, u8 ctl) | ||
407 | { | ||
408 | struct via82cxxx_dev *vdev = hwif->host->host_priv; | ||
409 | |||
410 | outb(ctl, hwif->io_ports.ctl_addr); | ||
411 | outb(vdev->cached_device[hwif->channel], hwif->io_ports.device_addr); | ||
412 | } | ||
413 | |||
414 | static void __via_dev_select(ide_drive_t *drive, u8 select) | ||
415 | { | ||
416 | ide_hwif_t *hwif = drive->hwif; | ||
417 | struct via82cxxx_dev *vdev = hwif->host->host_priv; | ||
418 | |||
419 | outb(select, hwif->io_ports.device_addr); | ||
420 | vdev->cached_device[hwif->channel] = select; | ||
421 | } | ||
422 | |||
423 | static void via_dev_select(ide_drive_t *drive) | ||
424 | { | ||
425 | __via_dev_select(drive, drive->select | ATA_DEVICE_OBS); | ||
426 | } | ||
427 | |||
428 | static void via_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid) | ||
429 | { | ||
430 | ide_hwif_t *hwif = drive->hwif; | ||
431 | struct ide_io_ports *io_ports = &hwif->io_ports; | ||
432 | |||
433 | if (valid & IDE_VALID_FEATURE) | ||
434 | outb(tf->feature, io_ports->feature_addr); | ||
435 | if (valid & IDE_VALID_NSECT) | ||
436 | outb(tf->nsect, io_ports->nsect_addr); | ||
437 | if (valid & IDE_VALID_LBAL) | ||
438 | outb(tf->lbal, io_ports->lbal_addr); | ||
439 | if (valid & IDE_VALID_LBAM) | ||
440 | outb(tf->lbam, io_ports->lbam_addr); | ||
441 | if (valid & IDE_VALID_LBAH) | ||
442 | outb(tf->lbah, io_ports->lbah_addr); | ||
443 | if (valid & IDE_VALID_DEVICE) | ||
444 | __via_dev_select(drive, tf->device); | ||
445 | } | ||
446 | |||
447 | const struct ide_tp_ops via_tp_ops = { | ||
448 | .exec_command = ide_exec_command, | ||
449 | .read_status = ide_read_status, | ||
450 | .read_altstatus = ide_read_altstatus, | ||
451 | .write_devctl = via_write_devctl, | ||
452 | |||
453 | .dev_select = via_dev_select, | ||
454 | .tf_load = via_tf_load, | ||
455 | .tf_read = ide_tf_read, | ||
456 | |||
457 | .input_data = ide_input_data, | ||
458 | .output_data = ide_output_data, | ||
459 | }; | ||
460 | |||
377 | static const struct ide_port_info via82cxxx_chipset __devinitdata = { | 461 | static const struct ide_port_info via82cxxx_chipset __devinitdata = { |
378 | .name = DRV_NAME, | 462 | .name = DRV_NAME, |
379 | .init_chipset = init_chipset_via82cxxx, | 463 | .init_chipset = init_chipset_via82cxxx, |
380 | .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, | 464 | .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, |
465 | .tp_ops = &via_tp_ops, | ||
381 | .port_ops = &via_port_ops, | 466 | .port_ops = &via_port_ops, |
382 | .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | | 467 | .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | |
383 | IDE_HFLAG_POST_SET_MODE | | 468 | IDE_HFLAG_POST_SET_MODE | |
@@ -402,11 +487,6 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i | |||
402 | * Find the ISA bridge and check we know what it is. | 487 | * Find the ISA bridge and check we know what it is. |
403 | */ | 488 | */ |
404 | via_config = via_config_find(&isa); | 489 | via_config = via_config_find(&isa); |
405 | if (!via_config->id) { | ||
406 | printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n", | ||
407 | pci_name(dev)); | ||
408 | return -ENODEV; | ||
409 | } | ||
410 | 490 | ||
411 | /* | 491 | /* |
412 | * Print the boot message. | 492 | * Print the boot message. |
@@ -436,10 +516,13 @@ static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_i | |||
436 | via_clock = 33333; | 516 | via_clock = 33333; |
437 | } | 517 | } |
438 | 518 | ||
439 | if (idx == 0) | 519 | if (idx == 1) |
440 | d.host_flags |= IDE_HFLAG_NO_AUTODMA; | ||
441 | else | ||
442 | d.enablebits[1].reg = d.enablebits[0].reg = 0; | 520 | d.enablebits[1].reg = d.enablebits[0].reg = 0; |
521 | else | ||
522 | d.host_flags |= IDE_HFLAG_NO_AUTODMA; | ||
523 | |||
524 | if (idx == VIA_IDFLAG_SINGLE) | ||
525 | d.host_flags |= IDE_HFLAG_SINGLE; | ||
443 | 526 | ||
444 | if ((via_config->flags & VIA_NO_UNMASK) == 0) | 527 | if ((via_config->flags & VIA_NO_UNMASK) == 0) |
445 | d.host_flags |= IDE_HFLAG_UNMASK_IRQS; | 528 | d.host_flags |= IDE_HFLAG_UNMASK_IRQS; |
@@ -475,8 +558,9 @@ static const struct pci_device_id via_pci_tbl[] = { | |||
475 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, | 558 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, |
476 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, | 559 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, |
477 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, | 560 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, |
478 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, | 561 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), VIA_IDFLAG_SINGLE }, |
479 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, | 562 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, |
563 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6415), 1 }, | ||
480 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, | 564 | { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, |
481 | { 0, }, | 565 | { 0, }, |
482 | }; | 566 | }; |
@@ -504,6 +588,6 @@ static void __exit via_ide_exit(void) | |||
504 | module_init(via_ide_init); | 588 | module_init(via_ide_init); |
505 | module_exit(via_ide_exit); | 589 | module_exit(via_ide_exit); |
506 | 590 | ||
507 | MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); | 591 | MODULE_AUTHOR("Vojtech Pavlik, Bartlomiej Zolnierkiewicz, Michel Aubry, Jeff Garzik, Andre Hedrick"); |
508 | MODULE_DESCRIPTION("PCI driver module for VIA IDE"); | 592 | MODULE_DESCRIPTION("PCI driver module for VIA IDE"); |
509 | MODULE_LICENSE("GPL"); | 593 | MODULE_LICENSE("GPL"); |