Merge branch 'spear/dwdma' into late/cleanup

This is a series originally prepared for inclusion in 3.9, which did
not work out because of dependencies on the dmaengine driver. All the
changes for the dmaengine code are merged in 3.9 now, so we can finally
do the switchover and remove the now unnecessary dma definitions for
spear13xx from the platform code.

The dma platform_data actually made up the majority of the spear13xx
platform code overall, so moving that into device tree files makes the
code substantially smaller.

* spear/dwdma:
  ata: arasan: remove the need for platform_data
  ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT
  serial: pl011: use generic DMA slave configuration if possible
  spi: pl022: use generic DMA slave configuration if possible

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 37 insertions, 25 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 3ea5408fcbeb..c25b00ef9dbb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -245,7 +245,7 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
         }
 }
 
-static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
+static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
 {
         /* DMA is the sole user of the platform data right now */
         struct amba_pl011_data *plat = uap->port.dev->platform_data;
@@ -259,20 +259,25 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
         struct dma_chan *chan;
         dma_cap_mask_t mask;
 
-        /* We need platform data */
-        if (!plat || !plat->dma_filter) {
-                dev_info(uap->port.dev, "no DMA platform data\n");
-                return;
-        }
+        chan = dma_request_slave_channel(dev, "tx");
 
-        /* Try to acquire a generic DMA engine slave TX channel */
-        dma_cap_zero(mask);
-        dma_cap_set(DMA_SLAVE, mask);
-
-        chan = dma_request_channel(mask, plat->dma_filter, plat->dma_tx_param);
         if (!chan) {
-                dev_err(uap->port.dev, "no TX DMA channel!\n");
-                return;
+                /* We need platform data */
+                if (!plat || !plat->dma_filter) {
+                        dev_info(uap->port.dev, "no DMA platform data\n");
+                        return;
+                }
+
+                /* Try to acquire a generic DMA engine slave TX channel */
+                dma_cap_zero(mask);
+                dma_cap_set(DMA_SLAVE, mask);
+
+                chan = dma_request_channel(mask, plat->dma_filter,
+                                                plat->dma_tx_param);
+                if (!chan) {
+                        dev_err(uap->port.dev, "no TX DMA channel!\n");
+                        return;
+                }
         }
 
         dmaengine_slave_config(chan, &tx_conf);
@@ -282,7 +287,18 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
                  dma_chan_name(uap->dmatx.chan));
 
         /* Optionally make use of an RX channel as well */
-        if (plat->dma_rx_param) {
+        chan = dma_request_slave_channel(dev, "rx");
+        
+        if (!chan && plat->dma_rx_param) {
+                chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
+
+                if (!chan) {
+                        dev_err(uap->port.dev, "no RX DMA channel!\n");
+                        return;
+                }
+        }
+
+        if (chan) {
                 struct dma_slave_config rx_conf = {
                         .src_addr = uap->port.mapbase + UART01x_DR,
                         .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -291,12 +307,6 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
                         .device_fc = false,
                 };
 
-                chan = dma_request_channel(mask, plat->dma_filter, plat->dma_rx_param);
-                if (!chan) {
-                        dev_err(uap->port.dev, "no RX DMA channel!\n");
-                        return;
-                }
-
                 dmaengine_slave_config(chan, &rx_conf);
                 uap->dmarx.chan = chan;
 
@@ -315,6 +325,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
 struct dma_uap {
         struct list_head node;
         struct uart_amba_port *uap;
+        struct device *dev;
 };
 
 static LIST_HEAD(pl011_dma_uarts);
@@ -325,7 +336,7 @@ static int __init pl011_dma_initcall(void)
 
         list_for_each_safe(node, tmp, &pl011_dma_uarts) {
                 struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
-                pl011_dma_probe_initcall(dmau->uap);
+                pl011_dma_probe_initcall(dmau->dev, dmau->uap);
                 list_del(node);
                 kfree(dmau);
         }
@@ -334,18 +345,19 @@ static int __init pl011_dma_initcall(void)
 
 device_initcall(pl011_dma_initcall);
 
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
         struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
         if (dmau) {
                 dmau->uap = uap;
+                dmau->dev = dev;
                 list_add_tail(&dmau->node, &pl011_dma_uarts);
         }
 }
 #else
-static void pl011_dma_probe(struct uart_amba_port *uap)
+static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
 {
-        pl011_dma_probe_initcall(uap);
+        pl011_dma_probe_initcall(dev, uap);
 }
 #endif
 
@@ -2020,7 +2032,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
         uap->port.ops = &amba_pl011_pops;
         uap->port.flags = UPF_BOOT_AUTOCONF;
         uap->port.line = i;
-        pl011_dma_probe(uap);
+        pl011_dma_probe(&dev->dev, uap);
 
         /* Ensure interrupts from this UART are masked and cleared */
         writew(0, uap->port.membase + UART011_IMSC);