[PATCH] ppc: Remove powermac support from ARCH=ppc

This makes it possible to build kernels for PReP and/or CHRP
with ARCH=ppc by removing the (non-building) powermac support.
It's now also possible to select PReP and CHRP independently.
Powermac users should now build with ARCH=powerpc instead of
ARCH=ppc.  (This does mean that it is no longer possible to
build a 32-bit kernel for a G5.)

Signed-off-by: Paul Mackerras <paulus@samba.org>

6 files changed, 12 insertions, 358 deletions

diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
index ca0201300868..647da4c1d219 100644
--- a/arch/ppc/kernel/Makefile
+++ b/arch/ppc/kernel/Makefile
@@ -9,7 +9,6 @@ extra-$(CONFIG_44x)		:= head_44x.o
 extra-$(CONFIG_FSL_BOOKE)       := head_fsl_booke.o
 extra-$(CONFIG_8xx)             := head_8xx.o
 extra-$(CONFIG_6xx)             += idle_6xx.o
-extra-$(CONFIG_POWER4)          += idle_power4.o
 extra-y                         += vmlinux.lds
 
 obj-y                           := entry.o traps.o idle.o time.o misc.o \
@@ -17,7 +16,6 @@ obj-y				:= entry.o traps.o idle.o time.o misc.o \
                                         ppc_htab.o
 obj-$(CONFIG_6xx)               += l2cr.o cpu_setup_6xx.o
 obj-$(CONFIG_SOFTWARE_SUSPEND)  += swsusp.o
-obj-$(CONFIG_POWER4)            += cpu_setup_power4.o
 obj-$(CONFIG_MODULES)           += module.o ppc_ksyms.o
 obj-$(CONFIG_NOT_COHERENT_CACHE)        += dma-mapping.o
 obj-$(CONFIG_PCI)               += pci.o
diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S
index fb5658bba285..c3427eed8345 100644
--- a/arch/ppc/kernel/misc.S
+++ b/arch/ppc/kernel/misc.S
@@ -204,78 +204,6 @@ _GLOBAL(call_setup_cpu)
         mtctr   r5
         bctr
 
-#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx)
-
-/* This gets called by via-pmu.c to switch the PLL selection
- * on 750fx CPU. This function should really be moved to some
- * other place (as most of the cpufreq code in via-pmu
- */
-_GLOBAL(low_choose_750fx_pll)
-        /* Clear MSR:EE */
-        mfmsr   r7
-        rlwinm  r0,r7,0,17,15
-        mtmsr   r0
-
-        /* If switching to PLL1, disable HID0:BTIC */
-        cmplwi  cr0,r3,0
-        beq     1f
-        mfspr   r5,SPRN_HID0
-        rlwinm  r5,r5,0,27,25
-        sync
-        mtspr   SPRN_HID0,r5
-        isync
-        sync
-
-1:
-        /* Calc new HID1 value */
-        mfspr   r4,SPRN_HID1    /* Build a HID1:PS bit from parameter */
-        rlwinm  r5,r3,16,15,15  /* Clear out HID1:PS from value read */
-        rlwinm  r4,r4,0,16,14   /* Could have I used rlwimi here ? */
-        or      r4,r4,r5
-        mtspr   SPRN_HID1,r4
-
-        /* Store new HID1 image */
-        rlwinm  r6,r1,0,0,18
-        lwz     r6,TI_CPU(r6)
-        slwi    r6,r6,2
-        addis   r6,r6,nap_save_hid1@ha
-        stw     r4,nap_save_hid1@l(r6)
-
-        /* If switching to PLL0, enable HID0:BTIC */
-        cmplwi  cr0,r3,0
-        bne     1f
-        mfspr   r5,SPRN_HID0
-        ori     r5,r5,HID0_BTIC
-        sync
-        mtspr   SPRN_HID0,r5
-        isync
-        sync
-
-1:
-        /* Return */
-        mtmsr   r7
-        blr
-
-_GLOBAL(low_choose_7447a_dfs)
-        /* Clear MSR:EE */
-        mfmsr   r7
-        rlwinm  r0,r7,0,17,15
-        mtmsr   r0
-        
-        /* Calc new HID1 value */
-        mfspr   r4,SPRN_HID1
-        insrwi  r4,r3,1,9       /* insert parameter into bit 9 */
-        sync
-        mtspr   SPRN_HID1,r4
-        sync
-        isync
-
-        /* Return */
-        mtmsr   r7
-        blr
-
-#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */
-
 /*
  * complement mask on the msr then "or" some values on.
  *     _nmask_and_or_msr(nmask, value_to_or)
diff --git a/arch/ppc/kernel/pci.c b/arch/ppc/kernel/pci.c
index 704c846b2b0f..04d04c5bfdd0 100644
--- a/arch/ppc/kernel/pci.c
+++ b/arch/ppc/kernel/pci.c
@@ -1,5 +1,5 @@
 /*
- * Common pmac/prep/chrp pci routines. -- Cort
+ * Common prep/chrp pci routines. -- Cort
  */
 
 #include <linux/config.h>
@@ -50,8 +50,7 @@ static void fixup_cpc710_pci64(struct pci_dev* dev);
 static u8* pci_to_OF_bus_map;
 #endif
 
-/* By default, we don't re-assign bus numbers. We do this only on
- * some pmacs
+/* By default, we don't re-assign bus numbers.
  */
 int pci_assign_all_buses;
 
@@ -780,17 +779,6 @@ pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
                 return NULL;
 
         /* Fixup bus number according to what OF think it is. */
-#ifdef CONFIG_PPC_PMAC
-        /* The G5 need a special case here. Basically, we don't remap all
-         * busses on it so we don't create the pci-OF-map. However, we do
-         * remap the AGP bus and so have to deal with it. A future better
-         * fix has to be done by making the remapping per-host and always
-         * filling the pci_to_OF map. --BenH
-         */
-        if (_machine == _MACH_Pmac && busnr >= 0xf0)
-                busnr -= 0xf0;
-        else
-#endif
         if (pci_to_OF_bus_map)
                 busnr = pci_to_OF_bus_map[busnr];
         if (busnr == 0xff)
@@ -1040,216 +1028,6 @@ void pcibios_add_platform_entries(struct pci_dev *pdev)
 }
 
 
-#ifdef CONFIG_PPC_PMAC
-/*
- * This set of routines checks for PCI<->PCI bridges that have closed
- * IO resources and have child devices. It tries to re-open an IO
- * window on them.
- *
- * This is a _temporary_ fix to workaround a problem with Apple's OF
- * closing IO windows on P2P bridges when the OF drivers of cards
- * below this bridge don't claim any IO range (typically ATI or
- * Adaptec).
- *
- * A more complete fix would be to use drivers/pci/setup-bus.c, which
- * involves a working pcibios_fixup_pbus_ranges(), some more care about
- * ordering when creating the host bus resources, and maybe a few more
- * minor tweaks
- */
-
-/* Initialize bridges with base/limit values we have collected */
-static void __init
-do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
-{
-        struct pci_dev *bridge = bus->self;
-        struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
-        u32 l;
-        u16 w;
-        struct resource res;
-
-        if (bus->resource[0] == NULL)
-                return;
-        res = *(bus->resource[0]);
-
-        DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
-        res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
-        res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
-        DBG("  IO window: %08lx-%08lx\n", res.start, res.end);
-
-        /* Set up the top and bottom of the PCI I/O segment for this bus. */
-        pci_read_config_dword(bridge, PCI_IO_BASE, &l);
-        l &= 0xffff000f;
-        l |= (res.start >> 8) & 0x00f0;
-        l |= res.end & 0xf000;
-        pci_write_config_dword(bridge, PCI_IO_BASE, l);
-
-        if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
-                l = (res.start >> 16) | (res.end & 0xffff0000);
-                pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
-        }
-
-        pci_read_config_word(bridge, PCI_COMMAND, &w);
-        w |= PCI_COMMAND_IO;
-        pci_write_config_word(bridge, PCI_COMMAND, w);
-
-#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
-        if (enable_vga) {
-                pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
-                w |= PCI_BRIDGE_CTL_VGA;
-                pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
-        }
-#endif
-}
-
-/* This function is pretty basic and actually quite broken for the
- * general case, it's enough for us right now though. It's supposed
- * to tell us if we need to open an IO range at all or not and what
- * size.
- */
-static int __init
-check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
-{
-        struct pci_dev *dev;
-        int     i;
-        int     rc = 0;
-
-#define push_end(res, size) do { unsigned long __sz = (size) ; \
-        res->end = ((res->end + __sz) / (__sz + 1)) * (__sz + 1) + __sz; \
-    } while (0)
-
-        list_for_each_entry(dev, &bus->devices, bus_list) {
-                u16 class = dev->class >> 8;
-
-                if (class == PCI_CLASS_DISPLAY_VGA ||
-                    class == PCI_CLASS_NOT_DEFINED_VGA)
-                        *found_vga = 1;
-                if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
-                        rc |= check_for_io_childs(dev->subordinate, res, found_vga);
-                if (class == PCI_CLASS_BRIDGE_CARDBUS)
-                        push_end(res, 0xfff);
-
-                for (i=0; i<PCI_NUM_RESOURCES; i++) {
-                        struct resource *r;
-                        unsigned long r_size;
-
-                        if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
-                            && i >= PCI_BRIDGE_RESOURCES)
-                                continue;
-                        r = &dev->resource[i];
-                        r_size = r->end - r->start;
-                        if (r_size < 0xfff)
-                                r_size = 0xfff;
-                        if (r->flags & IORESOURCE_IO && (r_size) != 0) {
-                                rc = 1;
-                                push_end(res, r_size);
-                        }
-                }
-        }
-
-        return rc;
-}
-
-/* Here we scan all P2P bridges of a given level that have a closed
- * IO window. Note that the test for the presence of a VGA card should
- * be improved to take into account already configured P2P bridges,
- * currently, we don't see them and might end up configuring 2 bridges
- * with VGA pass through enabled
- */
-static void __init
-do_fixup_p2p_level(struct pci_bus *bus)
-{
-        struct pci_bus *b;
-        int i, parent_io;
-        int has_vga = 0;
-
-        for (parent_io=0; parent_io<4; parent_io++)
-                if (bus->resource[parent_io]
-                    && bus->resource[parent_io]->flags & IORESOURCE_IO)
-                        break;
-        if (parent_io >= 4)
-                return;
-
-        list_for_each_entry(b, &bus->children, node) {
-                struct pci_dev *d = b->self;
-                struct pci_controller* hose = (struct pci_controller *)d->sysdata;
-                struct resource *res = b->resource[0];
-                struct resource tmp_res;
-                unsigned long max;
-                int found_vga = 0;
-
-                memset(&tmp_res, 0, sizeof(tmp_res));
-                tmp_res.start = bus->resource[parent_io]->start;
-
-                /* We don't let low addresses go through that closed P2P bridge, well,
-                 * that may not be necessary but I feel safer that way
-                 */
-                if (tmp_res.start == 0)
-                        tmp_res.start = 0x1000;
-        
-                if (!list_empty(&b->devices) && res && res->flags == 0 &&
-                    res != bus->resource[parent_io] &&
-                    (d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
-                    check_for_io_childs(b, &tmp_res, &found_vga)) {
-                        u8 io_base_lo;
-
-                        printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
-
-                        if (found_vga) {
-                                if (has_vga) {
-                                        printk(KERN_WARNING "Skipping VGA, already active"
-                                            " on bus segment\n");
-                                        found_vga = 0;
-                                } else
-                                        has_vga = 1;
-                        }
-                        pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
-
-                        if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
-                                max = ((unsigned long) hose->io_base_virt
-                                        - isa_io_base) + 0xffffffff;
-                        else
-                                max = ((unsigned long) hose->io_base_virt
-                                        - isa_io_base) + 0xffff;
-
-                        *res = tmp_res;
-                        res->flags = IORESOURCE_IO;
-                        res->name = b->name;
-                
-                        /* Find a resource in the parent where we can allocate */
-                        for (i = 0 ; i < 4; i++) {
-                                struct resource *r = bus->resource[i];
-                                if (!r)
-                                        continue;
-                                if ((r->flags & IORESOURCE_IO) == 0)
-                                        continue;
-                                DBG("Trying to allocate from %08lx, size %08lx from parent"
-                                    " res %d: %08lx -> %08lx\n",
-                                        res->start, res->end, i, r->start, r->end);
-                        
-                                if (allocate_resource(r, res, res->end + 1, res->start, max,
-                                    res->end + 1, NULL, NULL) < 0) {
-                                        DBG("Failed !\n");
-                                        continue;
-                                }
-                                do_update_p2p_io_resource(b, found_vga);
-                                break;
-                        }
-                }
-                do_fixup_p2p_level(b);
-        }
-}
-
-static void
-pcibios_fixup_p2p_bridges(void)
-{
-        struct pci_bus *b;
-
-        list_for_each_entry(b, &pci_root_buses, node)
-                do_fixup_p2p_level(b);
-}
-
-#endif /* CONFIG_PPC_PMAC */
-
 static int __init
 pcibios_init(void)
 {
@@ -1290,9 +1068,6 @@ pcibios_init(void)
         pcibios_allocate_bus_resources(&pci_root_buses);
         pcibios_allocate_resources(0);
         pcibios_allocate_resources(1);
-#ifdef CONFIG_PPC_PMAC
-        pcibios_fixup_p2p_bridges();
-#endif /* CONFIG_PPC_PMAC */
         pcibios_assign_resources();
 
         /* Call machine dependent post-init code */
@@ -1722,17 +1497,6 @@ long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
         struct pci_controller* hose;
         long result = -EOPNOTSUPP;
 
-        /* Argh ! Please forgive me for that hack, but that's the
-         * simplest way to get existing XFree to not lockup on some
-         * G5 machines... So when something asks for bus 0 io base
-         * (bus 0 is HT root), we return the AGP one instead.
-         */
-#ifdef CONFIG_PPC_PMAC
-        if (_machine == _MACH_Pmac && machine_is_compatible("MacRISC4"))
-                if (bus == 0)
-                        bus = 0xf0;
-#endif /* CONFIG_PPC_PMAC */
-
         hose = pci_bus_to_hose(bus);
         if (!hose)
                 return -ENODEV;
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index fb0da7c209db..3a6e4bcb3c53 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -34,7 +34,6 @@
 #include <asm/system.h>
 #include <asm/pci-bridge.h>
 #include <asm/irq.h>
-#include <asm/pmac_feature.h>
 #include <asm/dma.h>
 #include <asm/machdep.h>
 #include <asm/hw_irq.h>
@@ -58,7 +57,6 @@ extern void machine_check_exception(struct pt_regs *regs);
 extern void alignment_exception(struct pt_regs *regs);
 extern void program_check_exception(struct pt_regs *regs);
 extern void single_step_exception(struct pt_regs *regs);
-extern int pmac_newworld;
 extern int sys_sigreturn(struct pt_regs *regs);
 
 long long __ashrdi3(long long, int);
@@ -213,10 +211,6 @@ EXPORT_SYMBOL(adb_try_handler_change);
 EXPORT_SYMBOL(cuda_request);
 EXPORT_SYMBOL(cuda_poll);
 #endif /* CONFIG_ADB_CUDA */
-#ifdef CONFIG_PPC_PMAC
-EXPORT_SYMBOL(sys_ctrler);
-EXPORT_SYMBOL(pmac_newworld);
-#endif
 #ifdef CONFIG_PPC_OF
 EXPORT_SYMBOL(find_devices);
 EXPORT_SYMBOL(find_type_devices);
@@ -241,9 +235,6 @@ EXPORT_SYMBOL(of_node_put);
 #if defined(CONFIG_BOOTX_TEXT)
 EXPORT_SYMBOL(btext_update_display);
 #endif
-#if defined(CONFIG_SCSI) && defined(CONFIG_PPC_PMAC)
-EXPORT_SYMBOL(note_scsi_host);
-#endif
 #ifdef CONFIG_VT
 EXPORT_SYMBOL(kd_mksound);
 #endif
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index e707c6f6e61b..c08ab432e958 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -1,5 +1,5 @@
 /*
- * Common prep/pmac/chrp boot and setup code.
+ * Common prep/chrp boot and setup code.
  */
 
 #include <linux/config.h>
@@ -35,7 +35,6 @@
 #include <asm/machdep.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
-#include <asm/pmac_feature.h>
 #include <asm/sections.h>
 #include <asm/nvram.h>
 #include <asm/xmon.h>
@@ -55,7 +54,6 @@
 
 extern void platform_init(unsigned long r3, unsigned long r4,
                 unsigned long r5, unsigned long r6, unsigned long r7);
-extern void bootx_init(unsigned long r4, unsigned long phys);
 extern void identify_cpu(unsigned long offset, unsigned long cpu);
 extern void do_cpu_ftr_fixups(unsigned long offset);
 extern void reloc_got2(unsigned long offset);
@@ -80,8 +78,6 @@ EXPORT_SYMBOL(_machine);
 
 extern void prep_init(unsigned long r3, unsigned long r4,
                 unsigned long r5, unsigned long r6, unsigned long r7);
-extern void pmac_init(unsigned long r3, unsigned long r4,
-                unsigned long r5, unsigned long r6, unsigned long r7);
 extern void chrp_init(unsigned long r3, unsigned long r4,
                 unsigned long r5, unsigned long r6, unsigned long r7);
 
@@ -324,20 +320,15 @@ early_init(int r3, int r4, int r5)
         identify_cpu(offset, 0);
         do_cpu_ftr_fixups(offset);
 
-#if defined(CONFIG_PPC_MULTIPLATFORM)
+#if defined(CONFIG_PPC_OF)
         reloc_got2(offset);
 
-        /* If we came here from BootX, clear the screen,
-         * set up some pointers and return. */
-        if ((r3 == 0x426f6f58) && (r5 == 0))
-                bootx_init(r4, phys);
-
         /*
          * don't do anything on prep
          * for now, don't use bootinfo because it breaks yaboot 0.5
          * and assume that if we didn't find a magic number, we have OF
          */
-        else if (*(unsigned long *)(0) != 0xdeadc0de)
+        if (*(unsigned long *)(0) != 0xdeadc0de)
                 phys = prom_init(r3, r4, (prom_entry)r5);
 
         reloc_got2(-offset);
@@ -424,6 +415,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
         }
 #endif
 
+#ifdef CONFIG_PPC_OF
         have_of = 1;
 
         /* prom_init has already been called from __start */
@@ -495,19 +487,17 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 #endif /* CONFIG_ADB */
 
         switch (_machine) {
-#ifdef CONFIG_PPC_PMAC
-        case _MACH_Pmac:
-                pmac_init(r3, r4, r5, r6, r7);
-                break;
-#endif
 #ifdef CONFIG_PPC_CHRP
         case _MACH_chrp:
                 chrp_init(r3, r4, r5, r6, r7);
                 break;
 #endif
         }
+#endif /* CONFIG_PPC_OF */
 }
+#endif /* CONFIG_PPC_MULTIPLATFORM */
 
+#ifdef CONFIG_PPC_OF
 #ifdef CONFIG_SERIAL_CORE_CONSOLE
 extern char *of_stdout_device;
 
@@ -564,7 +554,7 @@ static int __init set_preferred_console(void)
 }
 console_initcall(set_preferred_console);
 #endif /* CONFIG_SERIAL_CORE_CONSOLE */
-#endif /* CONFIG_PPC_MULTIPLATFORM */
+#endif /* CONFIG_PPC_OF */
 
 struct bi_record *find_bootinfo(void)
 {
@@ -747,14 +737,6 @@ void __init setup_arch(char **cmdline_p)
         if (ppc_md.init_early)
                 ppc_md.init_early();
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
-        /* This could be called "early setup arch", it must be done
-         * now because xmon need it
-         */
-        if (_machine == _MACH_Pmac)
-                pmac_feature_init();    /* New cool way */
-#endif
-
 #ifdef CONFIG_XMON
         xmon_init(1);
         if (strstr(cmd_line, "xmon"))
diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c
index 9dbc4d28fa28..6d0a1838d94c 100644
--- a/arch/ppc/kernel/traps.c
+++ b/arch/ppc/kernel/traps.c
@@ -38,9 +38,6 @@
 #include <asm/io.h>
 #include <asm/reg.h>
 #include <asm/xmon.h>
-#ifdef CONFIG_PMAC_BACKLIGHT
-#include <asm/backlight.h>
-#endif
 #include <asm/pmc.h>
 
 #ifdef CONFIG_XMON
@@ -85,12 +82,6 @@ int die(const char * str, struct pt_regs * fp, long err)
         int nl = 0;
         console_verbose();
         spin_lock_irq(&die_lock);
-#ifdef CONFIG_PMAC_BACKLIGHT
-        if (_machine == _MACH_Pmac) {
-                set_backlight_enable(1);
-                set_backlight_level(BACKLIGHT_MAX);
-        }
-#endif
         printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
 #ifdef CONFIG_PREEMPT
         printk("PREEMPT ");
@@ -159,7 +150,7 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
  */
 static inline int check_io_access(struct pt_regs *regs)
 {
-#if defined CONFIG_PPC_PMAC || defined CONFIG_8xx
+#if defined CONFIG_8xx
         unsigned long msr = regs->msr;
         const struct exception_table_entry *entry;
         unsigned int *nip = (unsigned int *)regs->nip;
@@ -196,7 +187,7 @@ static inline int check_io_access(struct pt_regs *regs)
                         return 1;
                 }
         }
-#endif /* CONFIG_PPC_PMAC */
+#endif /* CONFIG_8xx */
         return 0;
 }