powerpc/85xx: Add T4240RDB board support

T4240RDB board Specification
----------------------------
Memory subsystem:
     6GB DDR3
     128MB NOR flash
     2GB NAND flash
Ethernet:
     Eight 1G SGMII ports
     Four 10Gbps SFP+ ports
PCIe:
     Two PCIe slots
USB:
     Two USB2.0 Type A ports
SDHC:
     One SD-card port
SATA:
     One SATA port
UART:
     Dual RJ45 ports

Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

1 files changed, 186 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/t4240rdb.dts b/arch/powerpc/boot/dts/t4240rdb.dts
new file mode 100644
index 000000000000..53761d4e8c51
--- /dev/null
+++ b/arch/powerpc/boot/dts/t4240rdb.dts
@@ -0,0 +1,186 @@
+/*
+ * T4240RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t4240si-pre.dtsi"
+
+/ {
+        model = "fsl,T4240RDB";
+        compatible = "fsl,T4240RDB";
+        #address-cells = <2>;
+        #size-cells = <2>;
+        interrupt-parent = <&mpic>;
+
+        ifc: localbus@ffe124000 {
+                reg = <0xf 0xfe124000 0 0x2000>;
+                ranges = <0 0 0xf 0xe8000000 0x08000000
+                          2 0 0xf 0xff800000 0x00010000
+                          3 0 0xf 0xffdf0000 0x00008000>;
+
+                nor@0,0 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "cfi-flash";
+                        reg = <0x0 0x0 0x8000000>;
+
+                        bank-width = <2>;
+                        device-width = <1>;
+                };
+
+                nand@2,0 {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "fsl,ifc-nand";
+                        reg = <0x2 0x0 0x10000>;
+                };
+        };
+
+        memory {
+                device_type = "memory";
+        };
+
+        dcsr: dcsr@f00000000 {
+                ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+        };
+
+        soc: soc@ffe000000 {
+                ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+                reg = <0xf 0xfe000000 0 0x00001000>;
+                spi@110000 {
+                        flash@0 {
+                                #address-cells = <1>;
+                                #size-cells = <1>;
+                                compatible = "sst,sst25wf040";
+                                reg = <0>;
+                                spi-max-frequency = <40000000>; /* input clock */
+                        };
+                };
+
+                i2c@118000 {
+                        eeprom@52 {
+                                compatible = "at24,24c256";
+                                reg = <0x52>;
+                        };
+                        eeprom@54 {
+                                compatible = "at24,24c256";
+                                reg = <0x54>;
+                        };
+                        eeprom@56 {
+                                compatible = "at24,24c256";
+                                reg = <0x56>;
+                        };
+                        rtc@68 {
+                                compatible = "dallas,ds1374";
+                                reg = <0x68>;
+                                interrupts = <0x1 0x1 0 0>;
+                        };
+                };
+
+                sdhc@114000 {
+                        voltage-ranges = <1800 1800 3300 3300>;
+                };
+        };
+
+        pci0: pcie@ffe240000 {
+                reg = <0xf 0xfe240000 0 0x10000>;
+                ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
+                          0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x20000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+
+        pci1: pcie@ffe250000 {
+                reg = <0xf 0xfe250000 0 0x10000>;
+                ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
+                          0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x20000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+
+        pci2: pcie@ffe260000 {
+                reg = <0xf 0xfe260000 0 0x1000>;
+                ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
+                          0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x20000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+
+        pci3: pcie@ffe270000 {
+                reg = <0xf 0xfe270000 0 0x10000>;
+                ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
+                          0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+                pcie@0 {
+                        ranges = <0x02000000 0 0xe0000000
+                                  0x02000000 0 0xe0000000
+                                  0 0x20000000
+
+                                  0x01000000 0 0x00000000
+                                  0x01000000 0 0x00000000
+                                  0 0x00010000>;
+                };
+        };
+
+        rio: rapidio@ffe0c0000 {
+                reg = <0xf 0xfe0c0000 0 0x11000>;
+
+                port1 {
+                        ranges = <0 0 0xc 0x20000000 0 0x10000000>;
+                };
+                port2 {
+                        ranges = <0 0 0xc 0x30000000 0 0x10000000>;
+                };
+        };
+};
+
+/include/ "fsl/t4240si-post.dtsi"