Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k,m68knommu: merge header files

Resolve trivial conflict in arch/m68knommu/include/asm/Kbuild

308 files changed, 31193 insertions, 0 deletions

diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild
new file mode 100644
index 000000000000..1a922fad76f7
--- /dev/null
+++ b/arch/m68k/include/asm/Kbuild
@@ -0,0 +1,2 @@
+include include/asm-generic/Kbuild.asm
+header-y += cachectl.h
diff --git a/arch/m68k/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h
new file mode 100644
index 000000000000..a337e56d09bf
--- /dev/null
+++ b/arch/m68k/include/asm/MC68328.h
@@ -0,0 +1,1266 @@
+
+/* include/asm-m68knommu/MC68328.h: '328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68328_H_
+#define _MC68328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR        0xfffff000
+#define SCR             BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8       0x01    /* 8-Bit Width Select */
+#define SCR_DMAP        0x04    /* Double Map */
+#define SCR_SO          0x08    /* Supervisor Only */
+#define SCR_BETEN       0x10    /* Bus-Error Time-Out Enable */
+#define SCR_PRV         0x20    /* Privilege Violation */
+#define SCR_WPV         0x40    /* Write Protect Violation */
+#define SCR_BETO        0x80    /* Bus-Error TimeOut */
+
+/*
+ * Mask Revision Register
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR      LONG_REF(MRR_ADDR)
+ 
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * Group Base Address Registers
+ */
+#define GRPBASEA_ADDR   0xfffff100
+#define GRPBASEB_ADDR   0xfffff102
+#define GRPBASEC_ADDR   0xfffff104
+#define GRPBASED_ADDR   0xfffff106
+
+#define GRPBASEA        WORD_REF(GRPBASEA_ADDR)
+#define GRPBASEB        WORD_REF(GRPBASEB_ADDR)
+#define GRPBASEC        WORD_REF(GRPBASEC_ADDR)
+#define GRPBASED        WORD_REF(GRPBASED_ADDR)
+
+#define GRPBASE_V         0x0001        /* Valid */
+#define GRPBASE_GBA_MASK  0xfff0        /* Group Base Address (bits 31-20) */
+
+/*
+ * Group Base Address Mask Registers 
+ */
+#define GRPMASKA_ADDR   0xfffff108
+#define GRPMASKB_ADDR   0xfffff10a
+#define GRPMASKC_ADDR   0xfffff10c
+#define GRPMASKD_ADDR   0xfffff10e
+
+#define GRPMASKA        WORD_REF(GRPMASKA_ADDR)
+#define GRPMASKB        WORD_REF(GRPMASKB_ADDR)
+#define GRPMASKC        WORD_REF(GRPMASKC_ADDR)
+#define GRPMASKD        WORD_REF(GRPMASKD_ADDR)
+
+#define GRMMASK_GMA_MASK 0xfffff0       /* Group Base Mask (bits 31-20) */
+
+/*
+ * Chip-Select Option Registers (group A)
+ */
+#define CSA0_ADDR       0xfffff110
+#define CSA1_ADDR       0xfffff114
+#define CSA2_ADDR       0xfffff118
+#define CSA3_ADDR       0xfffff11c
+
+#define CSA0            LONG_REF(CSA0_ADDR)
+#define CSA1            LONG_REF(CSA1_ADDR)
+#define CSA2            LONG_REF(CSA2_ADDR)
+#define CSA3            LONG_REF(CSA3_ADDR)
+
+#define CSA_WAIT_MASK   0x00000007      /* Wait State Selection */
+#define CSA_WAIT_SHIFT  0
+#define CSA_RO          0x00000008      /* Read-Only */
+#define CSA_AM_MASK     0x0000ff00      /* Address Mask (bits 23-16) */
+#define CSA_AM_SHIFT    8
+#define CSA_BUSW        0x00010000      /* Bus Width Select */
+#define CSA_AC_MASK     0xff000000      /* Address Compare (bits 23-16) */
+#define CSA_AC_SHIFT    24
+
+/*
+ * Chip-Select Option Registers (group B)
+ */
+#define CSB0_ADDR       0xfffff120
+#define CSB1_ADDR       0xfffff124
+#define CSB2_ADDR       0xfffff128
+#define CSB3_ADDR       0xfffff12c
+
+#define CSB0            LONG_REF(CSB0_ADDR)
+#define CSB1            LONG_REF(CSB1_ADDR)
+#define CSB2            LONG_REF(CSB2_ADDR)
+#define CSB3            LONG_REF(CSB3_ADDR)
+
+#define CSB_WAIT_MASK   0x00000007      /* Wait State Selection */
+#define CSB_WAIT_SHIFT  0
+#define CSB_RO          0x00000008      /* Read-Only */
+#define CSB_AM_MASK     0x0000ff00      /* Address Mask (bits 23-16) */
+#define CSB_AM_SHIFT    8
+#define CSB_BUSW        0x00010000      /* Bus Width Select */
+#define CSB_AC_MASK     0xff000000      /* Address Compare (bits 23-16) */
+#define CSB_AC_SHIFT    24
+
+/*
+ * Chip-Select Option Registers (group C)
+ */
+#define CSC0_ADDR       0xfffff130
+#define CSC1_ADDR       0xfffff134
+#define CSC2_ADDR       0xfffff138
+#define CSC3_ADDR       0xfffff13c
+
+#define CSC0            LONG_REF(CSC0_ADDR)
+#define CSC1            LONG_REF(CSC1_ADDR)
+#define CSC2            LONG_REF(CSC2_ADDR)
+#define CSC3            LONG_REF(CSC3_ADDR)
+
+#define CSC_WAIT_MASK   0x00000007      /* Wait State Selection */
+#define CSC_WAIT_SHIFT  0
+#define CSC_RO          0x00000008      /* Read-Only */
+#define CSC_AM_MASK     0x0000fff0      /* Address Mask (bits 23-12) */
+#define CSC_AM_SHIFT    4
+#define CSC_BUSW        0x00010000      /* Bus Width Select */
+#define CSC_AC_MASK     0xfff00000      /* Address Compare (bits 23-12) */
+#define CSC_AC_SHIFT    20
+
+/*
+ * Chip-Select Option Registers (group D)
+ */
+#define CSD0_ADDR       0xfffff140
+#define CSD1_ADDR       0xfffff144
+#define CSD2_ADDR       0xfffff148
+#define CSD3_ADDR       0xfffff14c
+
+#define CSD0            LONG_REF(CSD0_ADDR)
+#define CSD1            LONG_REF(CSD1_ADDR)
+#define CSD2            LONG_REF(CSD2_ADDR)
+#define CSD3            LONG_REF(CSD3_ADDR)
+
+#define CSD_WAIT_MASK   0x00000007      /* Wait State Selection */
+#define CSD_WAIT_SHIFT  0
+#define CSD_RO          0x00000008      /* Read-Only */
+#define CSD_AM_MASK     0x0000fff0      /* Address Mask (bits 23-12) */
+#define CSD_AM_SHIFT    4
+#define CSD_BUSW        0x00010000      /* Bus Width Select */
+#define CSD_AC_MASK     0xfff00000      /* Address Compare (bits 23-12) */
+#define CSD_AC_SHIFT    20
+
+/**********
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+ 
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR      0xfffff200
+#define PLLCR           WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL           0x0008   /* Disable PLL */
+#define PLLCR_CLKEN            0x0010   /* Clock (CLKO pin) enable */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700   /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_PIXCLK_SEL_MASK  0x3800   /* LCD Clock Selection */
+#define PLLCR_PIXCLK_SEL_SHIFT 11
+
+/* 'EZ328-compatible definitions */
+#define PLLCR_LCDCLK_SEL_MASK   PLLCR_PIXCLK_SEL_MASK
+#define PLLCR_LCDCLK_SEL_SHIFT  PLLCR_PIXCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR     0xfffff202
+#define PLLFSR          WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK  0x00ff          /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK  0x0f00          /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT     0x4000          /* Protect P & Q */
+#define PLLFSR_CLK32    0x8000          /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR      0xfffff207
+#define PCTRL           BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK        0x1f    /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT       0
+#define PCTRL_STOP              0x40    /* Enter power-save mode immediately */ 
+#define PCTRL_PCEN              0x80    /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR        0xfffff300
+#define IVR             BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADRR        0xfffff302
+#define ICR             WORD_REF(ICR_ADDR)
+
+#define ICR_ET6         0x0100  /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3         0x0200  /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2         0x0400  /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1         0x0800  /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6        0x1000  /* Polarity Control for IRQ6 */
+#define ICR_POL3        0x2000  /* Polarity Control for IRQ3 */
+#define ICR_POL2        0x4000  /* Polarity Control for IRQ2 */
+#define ICR_POL1        0x8000  /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR        0xfffff304
+#define IMR             LONG_REF(IMR_ADDR)
+ 
+/*
+ * Define the names for bit positions first. This is useful for
+ * request_irq
+ */
+#define SPIM_IRQ_NUM    0       /* SPI Master interrupt */
+#define TMR2_IRQ_NUM    1       /* Timer 2 interrupt */
+#define UART_IRQ_NUM    2       /* UART interrupt */    
+#define WDT_IRQ_NUM     3       /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM     4       /* RTC interrupt */
+#define KB_IRQ_NUM      6       /* Keyboard Interrupt */
+#define PWM_IRQ_NUM     7       /* Pulse-Width Modulator int. */
+#define INT0_IRQ_NUM    8       /* External INT0 */
+#define INT1_IRQ_NUM    9       /* External INT1 */
+#define INT2_IRQ_NUM    10      /* External INT2 */
+#define INT3_IRQ_NUM    11      /* External INT3 */
+#define INT4_IRQ_NUM    12      /* External INT4 */
+#define INT5_IRQ_NUM    13      /* External INT5 */
+#define INT6_IRQ_NUM    14      /* External INT6 */
+#define INT7_IRQ_NUM    15      /* External INT7 */
+#define IRQ1_IRQ_NUM    16      /* IRQ1 */
+#define IRQ2_IRQ_NUM    17      /* IRQ2 */
+#define IRQ3_IRQ_NUM    18      /* IRQ3 */
+#define IRQ6_IRQ_NUM    19      /* IRQ6 */
+#define PEN_IRQ_NUM     20      /* Pen Interrupt */
+#define SPIS_IRQ_NUM    21      /* SPI Slave Interrupt */
+#define TMR1_IRQ_NUM    22      /* Timer 1 interrupt */
+#define IRQ7_IRQ_NUM    23      /* IRQ7 */
+
+/* '328-compatible definitions */
+#define SPI_IRQ_NUM     SPIM_IRQ_NUM
+#define TMR_IRQ_NUM     TMR1_IRQ_NUM
+ 
+/*
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPIM       (1 << SPIM _IRQ_NUM)    /* Mask SPI Master interrupt */
+#define IMR_MTMR2       (1 << TMR2_IRQ_NUM)     /* Mask Timer 2 interrupt */
+#define IMR_MUART       (1 << UART_IRQ_NUM)     /* Mask UART interrupt */       
+#define IMR_MWDT        (1 << WDT_IRQ_NUM)      /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC        (1 << RTC_IRQ_NUM)      /* Mask RTC interrupt */
+#define IMR_MKB         (1 << KB_IRQ_NUM)       /* Mask Keyboard Interrupt */
+#define IMR_MPWM        (1 << PWM_IRQ_NUM)      /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0       (1 << INT0_IRQ_NUM)     /* Mask External INT0 */
+#define IMR_MINT1       (1 << INT1_IRQ_NUM)     /* Mask External INT1 */
+#define IMR_MINT2       (1 << INT2_IRQ_NUM)     /* Mask External INT2 */
+#define IMR_MINT3       (1 << INT3_IRQ_NUM)     /* Mask External INT3 */
+#define IMR_MINT4       (1 << INT4_IRQ_NUM)     /* Mask External INT4 */
+#define IMR_MINT5       (1 << INT5_IRQ_NUM)     /* Mask External INT5 */
+#define IMR_MINT6       (1 << INT6_IRQ_NUM)     /* Mask External INT6 */
+#define IMR_MINT7       (1 << INT7_IRQ_NUM)     /* Mask External INT7 */
+#define IMR_MIRQ1       (1 << IRQ1_IRQ_NUM)     /* Mask IRQ1 */
+#define IMR_MIRQ2       (1 << IRQ2_IRQ_NUM)     /* Mask IRQ2 */
+#define IMR_MIRQ3       (1 << IRQ3_IRQ_NUM)     /* Mask IRQ3 */
+#define IMR_MIRQ6       (1 << IRQ6_IRQ_NUM)     /* Mask IRQ6 */
+#define IMR_MPEN        (1 << PEN_IRQ_NUM)      /* Mask Pen Interrupt */
+#define IMR_MSPIS       (1 << SPIS_IRQ_NUM)     /* Mask SPI Slave Interrupt */
+#define IMR_MTMR1       (1 << TMR1_IRQ_NUM)     /* Mask Timer 1 interrupt */
+#define IMR_MIRQ7       (1 << IRQ7_IRQ_NUM)     /* Mask IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IMR_MSPI        IMR_MSPIM
+#define IMR_MTMR        IMR_MTMR1
+
+/* 
+ * Interrupt Wake-Up Enable Register
+ */
+#define IWR_ADDR        0xfffff308
+#define IWR             LONG_REF(IWR_ADDR)
+
+#define IWR_SPIM        (1 << SPIM _IRQ_NUM)    /* SPI Master interrupt */
+#define IWR_TMR2        (1 << TMR2_IRQ_NUM)     /* Timer 2 interrupt */
+#define IWR_UART        (1 << UART_IRQ_NUM)     /* UART interrupt */    
+#define IWR_WDT         (1 << WDT_IRQ_NUM)      /* Watchdog Timer interrupt */
+#define IWR_RTC         (1 << RTC_IRQ_NUM)      /* RTC interrupt */
+#define IWR_KB          (1 << KB_IRQ_NUM)       /* Keyboard Interrupt */
+#define IWR_PWM         (1 << PWM_IRQ_NUM)      /* Pulse-Width Modulator int. */
+#define IWR_INT0        (1 << INT0_IRQ_NUM)     /* External INT0 */
+#define IWR_INT1        (1 << INT1_IRQ_NUM)     /* External INT1 */
+#define IWR_INT2        (1 << INT2_IRQ_NUM)     /* External INT2 */
+#define IWR_INT3        (1 << INT3_IRQ_NUM)     /* External INT3 */
+#define IWR_INT4        (1 << INT4_IRQ_NUM)     /* External INT4 */
+#define IWR_INT5        (1 << INT5_IRQ_NUM)     /* External INT5 */
+#define IWR_INT6        (1 << INT6_IRQ_NUM)     /* External INT6 */
+#define IWR_INT7        (1 << INT7_IRQ_NUM)     /* External INT7 */
+#define IWR_IRQ1        (1 << IRQ1_IRQ_NUM)     /* IRQ1 */
+#define IWR_IRQ2        (1 << IRQ2_IRQ_NUM)     /* IRQ2 */
+#define IWR_IRQ3        (1 << IRQ3_IRQ_NUM)     /* IRQ3 */
+#define IWR_IRQ6        (1 << IRQ6_IRQ_NUM)     /* IRQ6 */
+#define IWR_PEN         (1 << PEN_IRQ_NUM)      /* Pen Interrupt */
+#define IWR_SPIS        (1 << SPIS_IRQ_NUM)     /* SPI Slave Interrupt */
+#define IWR_TMR1        (1 << TMR1_IRQ_NUM)     /* Timer 1 interrupt */
+#define IWR_IRQ7        (1 << IRQ7_IRQ_NUM)     /* IRQ7 */
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR        0xfffff30c
+#define ISR             LONG_REF(ISR_ADDR)
+
+#define ISR_SPIM        (1 << SPIM _IRQ_NUM)    /* SPI Master interrupt */
+#define ISR_TMR2        (1 << TMR2_IRQ_NUM)     /* Timer 2 interrupt */
+#define ISR_UART        (1 << UART_IRQ_NUM)     /* UART interrupt */    
+#define ISR_WDT         (1 << WDT_IRQ_NUM)      /* Watchdog Timer interrupt */
+#define ISR_RTC         (1 << RTC_IRQ_NUM)      /* RTC interrupt */
+#define ISR_KB          (1 << KB_IRQ_NUM)       /* Keyboard Interrupt */
+#define ISR_PWM         (1 << PWM_IRQ_NUM)      /* Pulse-Width Modulator int. */
+#define ISR_INT0        (1 << INT0_IRQ_NUM)     /* External INT0 */
+#define ISR_INT1        (1 << INT1_IRQ_NUM)     /* External INT1 */
+#define ISR_INT2        (1 << INT2_IRQ_NUM)     /* External INT2 */
+#define ISR_INT3        (1 << INT3_IRQ_NUM)     /* External INT3 */
+#define ISR_INT4        (1 << INT4_IRQ_NUM)     /* External INT4 */
+#define ISR_INT5        (1 << INT5_IRQ_NUM)     /* External INT5 */
+#define ISR_INT6        (1 << INT6_IRQ_NUM)     /* External INT6 */
+#define ISR_INT7        (1 << INT7_IRQ_NUM)     /* External INT7 */
+#define ISR_IRQ1        (1 << IRQ1_IRQ_NUM)     /* IRQ1 */
+#define ISR_IRQ2        (1 << IRQ2_IRQ_NUM)     /* IRQ2 */
+#define ISR_IRQ3        (1 << IRQ3_IRQ_NUM)     /* IRQ3 */
+#define ISR_IRQ6        (1 << IRQ6_IRQ_NUM)     /* IRQ6 */
+#define ISR_PEN         (1 << PEN_IRQ_NUM)      /* Pen Interrupt */
+#define ISR_SPIS        (1 << SPIS_IRQ_NUM)     /* SPI Slave Interrupt */
+#define ISR_TMR1        (1 << TMR1_IRQ_NUM)     /* Timer 1 interrupt */
+#define ISR_IRQ7        (1 << IRQ7_IRQ_NUM)     /* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define ISR_SPI ISR_SPIM
+#define ISR_TMR ISR_TMR1
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR        0xfffff310
+#define IPR             LONG_REF(IPR_ADDR)
+
+#define IPR_SPIM        (1 << SPIM _IRQ_NUM)    /* SPI Master interrupt */
+#define IPR_TMR2        (1 << TMR2_IRQ_NUM)     /* Timer 2 interrupt */
+#define IPR_UART        (1 << UART_IRQ_NUM)     /* UART interrupt */    
+#define IPR_WDT         (1 << WDT_IRQ_NUM)      /* Watchdog Timer interrupt */
+#define IPR_RTC         (1 << RTC_IRQ_NUM)      /* RTC interrupt */
+#define IPR_KB          (1 << KB_IRQ_NUM)       /* Keyboard Interrupt */
+#define IPR_PWM         (1 << PWM_IRQ_NUM)      /* Pulse-Width Modulator int. */
+#define IPR_INT0        (1 << INT0_IRQ_NUM)     /* External INT0 */
+#define IPR_INT1        (1 << INT1_IRQ_NUM)     /* External INT1 */
+#define IPR_INT2        (1 << INT2_IRQ_NUM)     /* External INT2 */
+#define IPR_INT3        (1 << INT3_IRQ_NUM)     /* External INT3 */
+#define IPR_INT4        (1 << INT4_IRQ_NUM)     /* External INT4 */
+#define IPR_INT5        (1 << INT5_IRQ_NUM)     /* External INT5 */
+#define IPR_INT6        (1 << INT6_IRQ_NUM)     /* External INT6 */
+#define IPR_INT7        (1 << INT7_IRQ_NUM)     /* External INT7 */
+#define IPR_IRQ1        (1 << IRQ1_IRQ_NUM)     /* IRQ1 */
+#define IPR_IRQ2        (1 << IRQ2_IRQ_NUM)     /* IRQ2 */
+#define IPR_IRQ3        (1 << IRQ3_IRQ_NUM)     /* IRQ3 */
+#define IPR_IRQ6        (1 << IRQ6_IRQ_NUM)     /* IRQ6 */
+#define IPR_PEN         (1 << PEN_IRQ_NUM)      /* Pen Interrupt */
+#define IPR_SPIS        (1 << SPIS_IRQ_NUM)     /* SPI Slave Interrupt */
+#define IPR_TMR1        (1 << TMR1_IRQ_NUM)     /* Timer 1 interrupt */
+#define IPR_IRQ7        (1 << IRQ7_IRQ_NUM)     /* IRQ7 */
+
+/* 'EZ328-compatible definitions */
+#define IPR_SPI IPR_SPIM
+#define IPR_TMR IPR_TMR1
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR      0xfffff400              /* Port A direction reg */
+#define PADATA_ADDR     0xfffff401              /* Port A data register */
+#define PASEL_ADDR      0xfffff403              /* Port A Select register */
+
+#define PADIR           BYTE_REF(PADIR_ADDR)
+#define PADATA          BYTE_REF(PADATA_ADDR)
+#define PASEL           BYTE_REF(PASEL_ADDR)
+
+#define PA(x)           (1 << (x))
+#define PA_A(x)         PA((x) - 16)    /* This is specific to PA only! */
+
+#define PA_A16          PA(0)           /* Use A16 as PA(0) */
+#define PA_A17          PA(1)           /* Use A17 as PA(1) */
+#define PA_A18          PA(2)           /* Use A18 as PA(2) */
+#define PA_A19          PA(3)           /* Use A19 as PA(3) */
+#define PA_A20          PA(4)           /* Use A20 as PA(4) */
+#define PA_A21          PA(5)           /* Use A21 as PA(5) */
+#define PA_A22          PA(6)           /* Use A22 as PA(6) */
+#define PA_A23          PA(7)           /* Use A23 as PA(7) */
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR      0xfffff408              /* Port B direction reg */
+#define PBDATA_ADDR     0xfffff409              /* Port B data register */
+#define PBSEL_ADDR      0xfffff40b              /* Port B Select Register */
+
+#define PBDIR           BYTE_REF(PBDIR_ADDR)
+#define PBDATA          BYTE_REF(PBDATA_ADDR)
+#define PBSEL           BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)           (1 << (x))
+#define PB_D(x)         PB(x)           /* This is specific to port B only */
+
+#define PB_D0           PB(0)           /* Use D0 as PB(0) */
+#define PB_D1           PB(1)           /* Use D1 as PB(1) */
+#define PB_D2           PB(2)           /* Use D2 as PB(2) */
+#define PB_D3           PB(3)           /* Use D3 as PB(3) */
+#define PB_D4           PB(4)           /* Use D4 as PB(4) */
+#define PB_D5           PB(5)           /* Use D5 as PB(5) */
+#define PB_D6           PB(6)           /* Use D6 as PB(6) */
+#define PB_D7           PB(7)           /* Use D7 as PB(7) */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR      0xfffff410              /* Port C direction reg */
+#define PCDATA_ADDR     0xfffff411              /* Port C data register */
+#define PCSEL_ADDR      0xfffff413              /* Port C Select Register */
+
+#define PCDIR           BYTE_REF(PCDIR_ADDR)
+#define PCDATA          BYTE_REF(PCDATA_ADDR)
+#define PCSEL           BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)           (1 << (x))
+
+#define PC_WE           PC(6)           /* Use WE    as PC(6) */
+#define PC_DTACK        PC(5)           /* Use DTACK as PC(5) */
+#define PC_IRQ7         PC(4)           /* Use IRQ7  as PC(4) */
+#define PC_LDS          PC(2)           /* Use LDS   as PC(2) */
+#define PC_UDS          PC(1)           /* Use UDS   as PC(1) */
+#define PC_MOCLK        PC(0)           /* Use MOCLK as PC(0) */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR      0xfffff418              /* Port D direction reg */
+#define PDDATA_ADDR     0xfffff419              /* Port D data register */
+#define PDPUEN_ADDR     0xfffff41a              /* Port D Pull-Up enable reg */
+#define PDPOL_ADDR      0xfffff41c              /* Port D Polarity Register */
+#define PDIRQEN_ADDR    0xfffff41d              /* Port D IRQ enable register */
+#define PDIQEG_ADDR     0xfffff41f              /* Port D IRQ Edge Register */
+
+#define PDDIR           BYTE_REF(PDDIR_ADDR)
+#define PDDATA          BYTE_REF(PDDATA_ADDR)
+#define PDPUEN          BYTE_REF(PDPUEN_ADDR)
+#define PDPOL           BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN         BYTE_REF(PDIRQEN_ADDR)
+#define PDIQEG          BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)           (1 << (x))
+#define PD_KB(x)        PD(x)           /* This is specific for Port D only */
+
+#define PD_KB0          PD(0)   /* Use KB0 as PD(0) */
+#define PD_KB1          PD(1)   /* Use KB1 as PD(1) */
+#define PD_KB2          PD(2)   /* Use KB2 as PD(2) */
+#define PD_KB3          PD(3)   /* Use KB3 as PD(3) */
+#define PD_KB4          PD(4)   /* Use KB4 as PD(4) */
+#define PD_KB5          PD(5)   /* Use KB5 as PD(5) */
+#define PD_KB6          PD(6)   /* Use KB6 as PD(6) */
+#define PD_KB7          PD(7)   /* Use KB7 as PD(7) */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR      0xfffff420              /* Port E direction reg */
+#define PEDATA_ADDR     0xfffff421              /* Port E data register */
+#define PEPUEN_ADDR     0xfffff422              /* Port E Pull-Up enable reg */
+#define PESEL_ADDR      0xfffff423              /* Port E Select Register */
+
+#define PEDIR           BYTE_REF(PEDIR_ADDR)
+#define PEDATA          BYTE_REF(PEDATA_ADDR)
+#define PEPUEN          BYTE_REF(PEPUEN_ADDR)
+#define PESEL           BYTE_REF(PESEL_ADDR)
+
+#define PE(x)           (1 << (x))
+
+#define PE_CSA1         PE(1)   /* Use CSA1 as PE(1) */
+#define PE_CSA2         PE(2)   /* Use CSA2 as PE(2) */
+#define PE_CSA3         PE(3)   /* Use CSA3 as PE(3) */
+#define PE_CSB0         PE(4)   /* Use CSB0 as PE(4) */
+#define PE_CSB1         PE(5)   /* Use CSB1 as PE(5) */
+#define PE_CSB2         PE(6)   /* Use CSB2 as PE(6) */
+#define PE_CSB3         PE(7)   /* Use CSB3 as PE(7) */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR      0xfffff428              /* Port F direction reg */
+#define PFDATA_ADDR     0xfffff429              /* Port F data register */
+#define PFPUEN_ADDR     0xfffff42a              /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR      0xfffff42b              /* Port F Select Register */
+
+#define PFDIR           BYTE_REF(PFDIR_ADDR)
+#define PFDATA          BYTE_REF(PFDATA_ADDR)
+#define PFPUEN          BYTE_REF(PFPUEN_ADDR)
+#define PFSEL           BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)           (1 << (x))
+#define PF_A(x)         PF((x) - 24)    /* This is Port F specific only */
+
+#define PF_A24          PF(0)   /* Use A24 as PF(0) */
+#define PF_A25          PF(1)   /* Use A25 as PF(1) */
+#define PF_A26          PF(2)   /* Use A26 as PF(2) */
+#define PF_A27          PF(3)   /* Use A27 as PF(3) */
+#define PF_A28          PF(4)   /* Use A28 as PF(4) */
+#define PF_A29          PF(5)   /* Use A29 as PF(5) */
+#define PF_A30          PF(6)   /* Use A30 as PF(6) */
+#define PF_A31          PF(7)   /* Use A31 as PF(7) */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR      0xfffff430              /* Port G direction reg */
+#define PGDATA_ADDR     0xfffff431              /* Port G data register */
+#define PGPUEN_ADDR     0xfffff432              /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR      0xfffff433              /* Port G Select Register */
+
+#define PGDIR           BYTE_REF(PGDIR_ADDR)
+#define PGDATA          BYTE_REF(PGDATA_ADDR)
+#define PGPUEN          BYTE_REF(PGPUEN_ADDR)
+#define PGSEL           BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)           (1 << (x))
+
+#define PG_UART_TXD     PG(0)   /* Use UART_TXD as PG(0) */
+#define PG_UART_RXD     PG(1)   /* Use UART_RXD as PG(1) */
+#define PG_PWMOUT       PG(2)   /* Use PWMOUT   as PG(2) */
+#define PG_TOUT2        PG(3)   /* Use TOUT2    as PG(3) */
+#define PG_TIN2         PG(4)   /* Use TIN2     as PG(4) */
+#define PG_TOUT1        PG(5)   /* Use TOUT1    as PG(5) */
+#define PG_TIN1         PG(6)   /* Use TIN1     as PG(6) */
+#define PG_RTCOUT       PG(7)   /* Use RTCOUT   as PG(7) */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR      0xfffff438              /* Port J direction reg */
+#define PJDATA_ADDR     0xfffff439              /* Port J data register */
+#define PJSEL_ADDR      0xfffff43b              /* Port J Select Register */
+
+#define PJDIR           BYTE_REF(PJDIR_ADDR)
+#define PJDATA          BYTE_REF(PJDATA_ADDR)
+#define PJSEL           BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)           (1 << (x)) 
+
+#define PJ_CSD3         PJ(7)   /* Use CSD3 as PJ(7) */
+
+/* 
+ * Port K
+ */
+#define PKDIR_ADDR      0xfffff440              /* Port K direction reg */
+#define PKDATA_ADDR     0xfffff441              /* Port K data register */
+#define PKPUEN_ADDR     0xfffff442              /* Port K Pull-Up enable reg */
+#define PKSEL_ADDR      0xfffff443              /* Port K Select Register */
+
+#define PKDIR           BYTE_REF(PKDIR_ADDR)
+#define PKDATA          BYTE_REF(PKDATA_ADDR)
+#define PKPUEN          BYTE_REF(PKPUEN_ADDR)
+#define PKSEL           BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)           (1 << (x))
+
+/* 
+ * Port M
+ */
+#define PMDIR_ADDR      0xfffff438              /* Port M direction reg */
+#define PMDATA_ADDR     0xfffff439              /* Port M data register */
+#define PMPUEN_ADDR     0xfffff43a              /* Port M Pull-Up enable reg */
+#define PMSEL_ADDR      0xfffff43b              /* Port M Select Register */
+
+#define PMDIR           BYTE_REF(PMDIR_ADDR)
+#define PMDATA          BYTE_REF(PMDATA_ADDR)
+#define PMPUEN          BYTE_REF(PMPUEN_ADDR)
+#define PMSEL           BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)           (1 << (x))
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR       0xfffff500
+#define PWMC            WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK        0x0007  /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT       0
+#define PWMC_PWMEN              0x0010  /* Enable PWM */
+#define PMNC_POL                0x0020  /* PWM Output Bit Polarity */
+#define PWMC_PIN                0x0080  /* Current PWM output pin status */
+#define PWMC_LOAD               0x0100  /* Force a new period */
+#define PWMC_IRQEN              0x4000  /* Interrupt Request Enable */
+#define PWMC_CLKSRC             0x8000  /* Clock Source Select */
+
+/* 'EZ328-compatible definitions */
+#define PWMC_EN PWMC_PWMEN
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR       0xfffff502
+#define PWMP            WORD_REF(PWMP_ADDR)
+
+/* 
+ * PWM Width Register 
+ */
+#define PWMW_ADDR       0xfffff504
+#define PWMW            WORD_REF(PWMW_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR     0xfffff506
+#define PWMCNT          WORD_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timers
+ *
+ **********/
+
+/* 
+ * Timer Unit 1 and 2 Control Registers
+ */
+#define TCTL1_ADDR      0xfffff600
+#define TCTL1           WORD_REF(TCTL1_ADDR)
+#define TCTL2_ADDR      0xfffff60c
+#define TCTL2           WORD_REF(TCTL2_ADDR)
+
+#define TCTL_TEN                0x0001  /* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK     0x000e  /* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP      0x0000       /* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK    0x0002       /* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004       /* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN       0x0006       /* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ     0x0008       /* 32kHz clock to prescaler */
+#define TCTL_IRQEN              0x0010  /* IRQ Enable    */
+#define TCTL_OM                 0x0020  /* Output Mode   */
+#define TCTL_CAP_MASK           0x00c0  /* Capture Edge: */
+#define   TCTL_CAP_RE           0x0040          /* Capture on rizing edge   */
+#define   TCTL_CAP_FE           0x0080          /* Capture on falling edge  */
+#define TCTL_FRR                0x0010  /* Free-Run Mode */
+
+/* 'EZ328-compatible definitions */
+#define TCTL_ADDR       TCTL1_ADDR
+#define TCTL            TCTL1
+
+/*
+ * Timer Unit 1 and 2 Prescaler Registers
+ */
+#define TPRER1_ADDR     0xfffff602
+#define TPRER1          WORD_REF(TPRER1_ADDR)
+#define TPRER2_ADDR     0xfffff60e
+#define TPRER2          WORD_REF(TPRER2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TPRER_ADDR      TPRER1_ADDR
+#define TPRER           TPRER1
+
+/*
+ * Timer Unit 1 and 2 Compare Registers
+ */
+#define TCMP1_ADDR      0xfffff604
+#define TCMP1           WORD_REF(TCMP1_ADDR)
+#define TCMP2_ADDR      0xfffff610
+#define TCMP2           WORD_REF(TCMP2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCMP_ADDR       TCMP1_ADDR
+#define TCMP            TCMP1
+
+/*
+ * Timer Unit 1 and 2 Capture Registers
+ */
+#define TCR1_ADDR       0xfffff606
+#define TCR1            WORD_REF(TCR1_ADDR)
+#define TCR2_ADDR       0xfffff612
+#define TCR2            WORD_REF(TCR2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCR_ADDR        TCR1_ADDR
+#define TCR             TCR1
+
+/*
+ * Timer Unit 1 and 2 Counter Registers
+ */
+#define TCN1_ADDR       0xfffff608
+#define TCN1            WORD_REF(TCN1_ADDR)
+#define TCN2_ADDR       0xfffff614
+#define TCN2            WORD_REF(TCN2_ADDR)
+
+/* 'EZ328-compatible definitions */
+#define TCN_ADDR        TCN1_ADDR
+#define TCN             TCN
+
+/*
+ * Timer Unit 1 and 2 Status Registers
+ */
+#define TSTAT1_ADDR     0xfffff60a
+#define TSTAT1          WORD_REF(TSTAT1_ADDR)
+#define TSTAT2_ADDR     0xfffff616
+#define TSTAT2          WORD_REF(TSTAT2_ADDR)
+
+#define TSTAT_COMP      0x0001          /* Compare Event occurred */
+#define TSTAT_CAPT      0x0001          /* Capture Event occurred */
+
+/* 'EZ328-compatible definitions */
+#define TSTAT_ADDR      TSTAT1_ADDR
+#define TSTAT           TSTAT1
+
+/*
+ * Watchdog Compare Register 
+ */
+#define WRR_ADDR        0xfffff61a
+#define WRR             WORD_REF(WRR_ADDR)
+
+/*
+ * Watchdog Counter Register 
+ */
+#define WCN_ADDR        0xfffff61c
+#define WCN             WORD_REF(WCN_ADDR)
+
+/*
+ * Watchdog Control and Status Register
+ */
+#define WCSR_ADDR       0xfffff618
+#define WCSR            WORD_REF(WCSR_ADDR)
+
+#define WCSR_WDEN       0x0001  /* Watchdog Enable */
+#define WCSR_FI         0x0002  /* Forced Interrupt (instead of SW reset)*/
+#define WCSR_WRST       0x0004  /* Watchdog Reset */
+
+/**********
+ *
+ * 0xFFFFF7xx -- Serial Periferial Interface Slave (SPIS)
+ *
+ **********/
+
+/*
+ * SPI Slave Register
+ */
+#define SPISR_ADDR      0xfffff700
+#define SPISR           WORD_REF(SPISR_ADDR)
+
+#define SPISR_DATA_ADDR 0xfffff701
+#define SPISR_DATA      BYTE_REF(SPISR_DATA_ADDR)
+
+#define SPISR_DATA_MASK  0x00ff /* Shifted data from the external device */
+#define SPISR_DATA_SHIFT 0
+#define SPISR_SPISEN     0x0100 /* SPIS module enable */
+#define SPISR_POL        0x0200 /* SPSCLK polarity control */
+#define SPISR_PHA        0x0400 /* Phase relationship between SPSCLK & SPSRxD */
+#define SPISR_OVWR       0x0800 /* Data buffer has been overwritten */
+#define SPISR_DATARDY    0x1000 /* Data ready */
+#define SPISR_ENPOL      0x2000 /* Enable Polarity */
+#define SPISR_IRQEN      0x4000 /* SPIS IRQ Enable */
+#define SPISR_SPISIRQ    0x8000 /* SPIS IRQ posted */
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR   0xfffff800
+#define SPIMDATA        WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR   0xfffff802
+#define SPIMCONT        WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK  0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL             0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA             0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN           0x0040 /* IRQ Enable */
+#define SPIMCONT_SPIMIRQ         0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH             0x0100 /* Exchange */
+#define SPIMCONT_RSPIMEN         0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK  0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* 'EZ328-compatible definitions */
+#define SPIMCONT_IRQ    SPIMCONT_SPIMIRQ
+#define SPIMCONT_ENABLE SPIMCONT_SPIMEN
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR     0xfffff900
+#define USTCNT          WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAVAILEN        0x0001  /* Transmitter Available Int Enable */
+#define USTCNT_TXHALFEN         0x0002  /* Transmitter Half Empty Int Enable */
+#define USTCNT_TXEMPTYEN        0x0004  /* Transmitter Empty Int Enable */
+#define USTCNT_RXREADYEN        0x0008  /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHALFEN         0x0010  /* Receiver Half-Full Int Enable */
+#define USTCNT_RXFULLEN         0x0020  /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSDELTAEN       0x0040  /* CTS Delta Interrupt Enable */
+#define USTCNT_GPIODELTAEN      0x0080  /* Old Data Interrupt Enable */
+#define USTCNT_8_7              0x0100  /* Eight or seven-bit transmission */
+#define USTCNT_STOP             0x0200  /* Stop bit transmission */
+#define USTCNT_ODD_EVEN         0x0400  /* Odd Parity */
+#define USTCNT_PARITYEN         0x0800  /* Parity Enable */
+#define USTCNT_CLKMODE          0x1000  /* Clock Mode Select */
+#define USTCNT_TXEN             0x2000  /* Transmitter Enable */
+#define USTCNT_RXEN             0x4000  /* Receiver Enable */
+#define USTCNT_UARTEN           0x8000  /* UART Enable */
+
+/* 'EZ328-compatible definitions */
+#define USTCNT_TXAE     USTCNT_TXAVAILEN 
+#define USTCNT_TXHE     USTCNT_TXHALFEN
+#define USTCNT_TXEE     USTCNT_TXEMPTYEN
+#define USTCNT_RXRE     USTCNT_RXREADYEN
+#define USTCNT_RXHE     USTCNT_RXHALFEN
+#define USTCNT_RXFE     USTCNT_RXFULLEN
+#define USTCNT_CTSD     USTCNT_CTSDELTAEN
+#define USTCNT_ODD      USTCNT_ODD_EVEN
+#define USTCNT_PEN      USTCNT_PARITYEN
+#define USTCNT_CLKM     USTCNT_CLKMODE
+#define USTCNT_UEN      USTCNT_UARTEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR      0xfffff902
+#define UBAUD           WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK    0x003f  /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT   0
+#define UBAUD_DIVIDE_MASK       0x0700  /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT      8
+#define UBAUD_BAUD_SRC          0x0800  /* Baud Rate Source */
+#define UBAUD_GPIOSRC           0x1000  /* GPIO source */
+#define UBAUD_GPIODIR           0x2000  /* GPIO Direction */
+#define UBAUD_GPIO              0x4000  /* Current GPIO pin status */
+#define UBAUD_GPIODELTA         0x8000  /* GPIO pin value changed */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR        0xfffff904
+#define URX             WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA      BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK  0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK        0x0200 /* Break Detected */
+#define URX_FRAME_ERROR  0x0400 /* Framing Error */
+#define URX_OVRUN        0x0800 /* Serial Overrun */
+#define URX_DATA_READY   0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF    0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL    0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR        0xfffff906
+#define UTX             WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA      BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK  0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA    0x0100 /* CTS changed */
+#define UTX_CTS_STATUS   0x0200 /* CTS State */
+#define UTX_IGNORE_CTS   0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK   0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL     0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF    0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY   0x8000 /* Transmit FIFO is empty */
+
+/* 'EZ328-compatible definitions */
+#define UTX_CTS_STAT    UTX_CTS_STATUS
+#define UTX_NOCTS       UTX_IGNORE_CTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR      0xfffff908
+#define UMISC           WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL     0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL     0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP  0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN    0x0020 /* Infra-Red Enable */
+#define UMISC_RTS        0x0040 /* Set RTS status */
+#define UMISC_RTSCONT    0x0080 /* Choose RTS control */
+#define UMISC_LOOP       0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC     0x4000 /* Clock Source */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+  volatile unsigned short int pad3;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR       0xfffffa00
+#define LSSA            LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK   0xfffffffe      /* Bit 0 is reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR       0xfffffa05
+#define LVPW            BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with 'EZ328 !!!)
+ */
+#define LXMAX_ADDR      0xfffffa08
+#define LXMAX           WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK   0x02ff          /* Bits 0-3 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR      0xfffffa0a
+#define LYMAX           WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK   0x02ff          /* Bits 10-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR       0xfffffa18
+#define LCXP            WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK    0xc000          /* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT   0x0000
+#define   LCXP_CC_BLACK         0x4000
+#define   LCXP_CC_REVERSED      0x8000
+#define   LCXP_CC_WHITE         0xc000
+#define LCXP_CXP_MASK   0x02ff          /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR       0xfffffa1a
+#define LCYP            WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK   0x01ff          /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR      0xfffffa1c
+#define LCWCH           WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK   0x001f          /* Cursor Height */
+#define LCWCH_CH_SHIFT  0
+#define LCWCH_CW_MASK   0x1f00          /* Cursor Width */
+#define LCWCH_CW_SHIFT  8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR      0xfffffa1f
+#define LBLKC           BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK   0x7f    /* Blink Divisor */
+#define LBLKC_BD_SHIFT  0
+#define LBLKC_BKEN      0x80    /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR      0xfffffa20
+#define LPICF           BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK    0x01    /* Gray-Scale Mode */
+#define   LPICF_GS_BW      0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define LPICF_PBSIZ_MASK 0x06   /* Panel Bus Width */
+#define   LPICF_PBSIZ_1    0x00
+#define   LPICF_PBSIZ_2    0x02
+#define   LPICF_PBSIZ_4    0x04
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR     0xfffffa21
+#define LPOLCF          BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL   0x01    /* Pixel Polarity */
+#define LPOLCF_LPPOL    0x02    /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL   0x04    /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL   0x08    /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR     0xfffffa23
+#define LACDRC          BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACD_MASK  0x0f   /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR      0xfffffa25
+#define LPXCD           BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK  0x3f    /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR     0xfffffa27
+#define LCKCON          BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_PCDS      0x01   /* Pixel Clock Divider Source Select */
+#define LCKCON_DWIDTH    0x02   /* Display Memory Width  */
+#define LCKCON_DWS_MASK  0x3c   /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 2
+#define LCKCON_DMA16     0x40   /* DMA burst length */
+#define LCKCON_LCDON     0x80   /* Enable LCD Controller */
+
+/* 'EZ328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+
+/*
+ * LCD Last Buffer Address Register
+ */
+#define LLBAR_ADDR      0xfffffa29
+#define LLBAR           BYTE_REF(LLBAR_ADDR)
+
+#define LLBAR_LBAR_MASK  0x7f   /* Number of memory words to fill 1 line */
+#define LLBAR_LBAR_SHIFT 0
+
+/*
+ * LCD Octet Terminal Count Register 
+ */
+#define LOTCR_ADDR      0xfffffa2b
+#define LOTCR           BYTE_REF(LOTCR_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR      0xfffffa2d
+#define LPOSR           BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_BOS       0x08    /* Byte offset (for B/W mode only */
+#define LPOSR_POS_MASK  0x07    /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR      0xfffffa31
+#define LFRCM           BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK  0x0f   /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK  0xf0   /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR      0xfffffa32
+#define LGPMR           WORD_REF(LGPMR_ADDR)
+
+#define LGPMR_GLEVEL3_MASK      0x000f
+#define LGPMR_GLEVEL3_SHIFT     0 
+#define LGPMR_GLEVEL2_MASK      0x00f0
+#define LGPMR_GLEVEL2_SHIFT     4 
+#define LGPMR_GLEVEL0_MASK      0x0f00
+#define LGPMR_GLEVEL0_SHIFT     8 
+#define LGPMR_GLEVEL1_MASK      0xf000
+#define LGPMR_GLEVEL1_SHIFT     12
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR    0xfffffb00
+#define RTCTIME         LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCTIME_SECONDS_SHIFT   0
+#define RTCTIME_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCTIME_MINUTES_SHIFT   16
+#define RTCTIME_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCTIME_HOURS_SHIFT     24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR     0xfffffb0c
+#define RTCCTL          WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_384      0x0020  /* Crystal Selection */
+#define RTCCTL_ENABLE   0x0080  /* RTC Enable */
+
+/* 'EZ328-compatible definitions */
+#define RTCCTL_XTL      RTCCTL_384
+#define RTCCTL_EN       RTCCTL_ENABLE
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR     0xfffffb0e
+#define RTCISR          WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW       0x0001  /* Stopwatch timed out */
+#define RTCISR_MIN      0x0002  /* 1-minute interrupt has occurred */
+#define RTCISR_ALM      0x0004  /* Alarm interrupt has occurred */
+#define RTCISR_DAY      0x0008  /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ      0x0010  /* 1Hz interrupt has occurred */
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR    0xfffffb10
+#define RTCIENR         WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW      0x0001  /* Stopwatch interrupt enable */
+#define RTCIENR_MIN     0x0002  /* 1-minute interrupt enable */
+#define RTCIENR_ALM     0x0004  /* Alarm interrupt enable */
+#define RTCIENR_DAY     0x0008  /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ     0x0010  /* 1Hz interrupt enable */
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR     0xfffffb12
+#define STPWCH          WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK  0x00ff /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+#endif /* _MC68328_H_ */
diff --git a/arch/m68k/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h
new file mode 100644
index 000000000000..6bb8f02685a2
--- /dev/null
+++ b/arch/m68k/include/asm/MC68332.h
@@ -0,0 +1,152 @@
+
+/* include/asm-m68knommu/MC68332.h: '332 control registers
+ *
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *
+ */
+
+#ifndef _MC68332_H_
+#define _MC68332_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+
+#define PORTE_ADDR      0xfffa11
+#define PORTE   BYTE_REF(PORTE_ADDR)
+#define DDRE_ADDR       0xfffa15
+#define DDRE    BYTE_REF(DDRE_ADDR)
+#define PEPAR_ADDR      0xfffa17
+#define PEPAR   BYTE_REF(PEPAR_ADDR)
+
+#define PORTF_ADDR      0xfffa19
+#define PORTF   BYTE_REF(PORTF_ADDR)
+#define DDRF_ADDR       0xfffa1d
+#define DDRF    BYTE_REF(DDRF_ADDR)
+#define PFPAR_ADDR      0xfffa1f
+#define PFPAR   BYTE_REF(PFPAR_ADDR)
+
+#define PORTQS_ADDR     0xfffc15
+#define PORTQS  BYTE_REF(PORTQS_ADDR)
+#define DDRQS_ADDR      0xfffc17
+#define DDRQS   BYTE_REF(DDRQS_ADDR)
+#define PQSPAR_ADDR     0xfffc16
+#define PQSPAR  BYTE_REF(PQSPAR_ADDR)
+
+#define CSPAR0_ADDR 0xFFFA44
+#define CSPAR0 WORD_REF(CSPAR0_ADDR)
+#define CSPAR1_ADDR 0xFFFA46
+#define CSPAR1 WORD_REF(CSPAR1_ADDR)
+#define CSARBT_ADDR 0xFFFA48
+#define CSARBT WORD_REF(CSARBT_ADDR)
+#define CSOPBT_ADDR 0xFFFA4A
+#define CSOPBT WORD_REF(CSOPBT_ADDR)
+#define CSBAR0_ADDR 0xFFFA4C
+#define CSBAR0 WORD_REF(CSBAR0_ADDR)
+#define CSOR0_ADDR 0xFFFA4E
+#define CSOR0 WORD_REF(CSOR0_ADDR)
+#define CSBAR1_ADDR 0xFFFA50
+#define CSBAR1 WORD_REF(CSBAR1_ADDR)
+#define CSOR1_ADDR 0xFFFA52
+#define CSOR1 WORD_REF(CSOR1_ADDR)
+#define CSBAR2_ADDR 0xFFFA54
+#define CSBAR2 WORD_REF(CSBAR2_ADDR)
+#define CSOR2_ADDR 0xFFFA56
+#define CSOR2 WORD_REF(CSOR2_ADDR)
+#define CSBAR3_ADDR 0xFFFA58
+#define CSBAR3 WORD_REF(CSBAR3_ADDR)
+#define CSOR3_ADDR 0xFFFA5A
+#define CSOR3 WORD_REF(CSOR3_ADDR)
+#define CSBAR4_ADDR 0xFFFA5C
+#define CSBAR4 WORD_REF(CSBAR4_ADDR)
+#define CSOR4_ADDR 0xFFFA5E
+#define CSOR4 WORD_REF(CSOR4_ADDR)
+#define CSBAR5_ADDR 0xFFFA60
+#define CSBAR5 WORD_REF(CSBAR5_ADDR)
+#define CSOR5_ADDR 0xFFFA62
+#define CSOR5 WORD_REF(CSOR5_ADDR)
+#define CSBAR6_ADDR 0xFFFA64
+#define CSBAR6 WORD_REF(CSBAR6_ADDR)
+#define CSOR6_ADDR 0xFFFA66
+#define CSOR6 WORD_REF(CSOR6_ADDR)
+#define CSBAR7_ADDR 0xFFFA68
+#define CSBAR7 WORD_REF(CSBAR7_ADDR)
+#define CSOR7_ADDR 0xFFFA6A
+#define CSOR7 WORD_REF(CSOR7_ADDR)
+#define CSBAR8_ADDR 0xFFFA6C
+#define CSBAR8 WORD_REF(CSBAR8_ADDR)
+#define CSOR8_ADDR 0xFFFA6E
+#define CSOR8 WORD_REF(CSOR8_ADDR)
+#define CSBAR9_ADDR 0xFFFA70
+#define CSBAR9 WORD_REF(CSBAR9_ADDR)
+#define CSOR9_ADDR 0xFFFA72
+#define CSOR9 WORD_REF(CSOR9_ADDR)
+#define CSBAR10_ADDR 0xFFFA74
+#define CSBAR10 WORD_REF(CSBAR10_ADDR)
+#define CSOR10_ADDR 0xFFFA76
+#define CSOR10 WORD_REF(CSOR10_ADDR)
+
+#define CSOR_MODE_ASYNC 0x0000
+#define CSOR_MODE_SYNC  0x8000
+#define CSOR_MODE_MASK  0x8000
+#define CSOR_BYTE_DISABLE       0x0000
+#define CSOR_BYTE_UPPER         0x4000
+#define CSOR_BYTE_LOWER         0x2000
+#define CSOR_BYTE_BOTH          0x6000
+#define CSOR_BYTE_MASK          0x6000
+#define CSOR_RW_RSVD            0x0000
+#define CSOR_RW_READ            0x0800
+#define CSOR_RW_WRITE           0x1000
+#define CSOR_RW_BOTH            0x1800
+#define CSOR_RW_MASK            0x1800
+#define CSOR_STROBE_DS          0x0400
+#define CSOR_STROBE_AS          0x0000
+#define CSOR_STROBE_MASK        0x0400
+#define CSOR_DSACK_WAIT(x)      (wait << 6)
+#define CSOR_DSACK_FTERM        (14 << 6)
+#define CSOR_DSACK_EXTERNAL     (15 << 6)
+#define CSOR_DSACK_MASK         0x03c0
+#define CSOR_SPACE_CPU          0x0000
+#define CSOR_SPACE_USER         0x0010
+#define CSOR_SPACE_SU           0x0020
+#define CSOR_SPACE_BOTH         0x0030
+#define CSOR_SPACE_MASK         0x0030
+#define CSOR_IPL_ALL            0x0000
+#define CSOR_IPL_PRIORITY(x)    (x << 1)
+#define CSOR_IPL_MASK           0x000e
+#define CSOR_AVEC_ON            0x0001
+#define CSOR_AVEC_OFF           0x0000
+#define CSOR_AVEC_MASK          0x0001
+
+#define CSBAR_ADDR(x)           ((addr >> 11) << 3) 
+#define CSBAR_ADDR_MASK         0xfff8
+#define CSBAR_BLKSIZE_2K        0x0000
+#define CSBAR_BLKSIZE_8K        0x0001
+#define CSBAR_BLKSIZE_16K       0x0002
+#define CSBAR_BLKSIZE_64K       0x0003
+#define CSBAR_BLKSIZE_128K      0x0004
+#define CSBAR_BLKSIZE_256K      0x0005
+#define CSBAR_BLKSIZE_512K      0x0006
+#define CSBAR_BLKSIZE_1M        0x0007
+#define CSBAR_BLKSIZE_MASK      0x0007
+
+#define CSPAR_DISC      0
+#define CSPAR_ALT       1
+#define CSPAR_CS8       2
+#define CSPAR_CS16      3
+#define CSPAR_MASK      3
+
+#define CSPAR0_CSBOOT(x) (x << 0)
+#define CSPAR0_CS0(x)   (x << 2)
+#define CSPAR0_CS1(x)   (x << 4)
+#define CSPAR0_CS2(x)   (x << 6)
+#define CSPAR0_CS3(x)   (x << 8)
+#define CSPAR0_CS4(x)   (x << 10)
+#define CSPAR0_CS5(x)   (x << 12)
+
+#define CSPAR1_CS6(x)   (x << 0)
+#define CSPAR1_CS7(x)   (x << 2)
+#define CSPAR1_CS8(x)   (x << 4)
+#define CSPAR1_CS9(x)   (x << 6)
+#define CSPAR1_CS10(x)  (x << 8)
+
+#endif
diff --git a/arch/m68k/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h
new file mode 100644
index 000000000000..69b7f9139e5e
--- /dev/null
+++ b/arch/m68k/include/asm/MC68EZ328.h
@@ -0,0 +1,1253 @@
+
+/* include/asm-m68knommu/MC68EZ328.h: 'EZ328 control registers
+ *
+ * Copyright (C) 1999  Vladimir Gurevich <vgurevic@cisco.com>
+ *                     Bear & Hare Software, Inc.
+ *
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ */
+
+#ifndef _MC68EZ328_H_
+#define _MC68EZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR        0xfffff000
+#define SCR             BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8       0x01    /* 8-Bit Width Select */
+#define SCR_DMAP        0x04    /* Double Map */
+#define SCR_SO          0x08    /* Supervisor Only */
+#define SCR_BETEN       0x10    /* Bus-Error Time-Out Enable */
+#define SCR_PRV         0x20    /* Privilege Violation */
+#define SCR_WPV         0x40    /* Write Protect Violation */
+#define SCR_BETO        0x80    /* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR      LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR      0xfffff100
+#define CSGBB_ADDR      0xfffff102
+
+#define CSGBC_ADDR      0xfffff104
+#define CSGBD_ADDR      0xfffff106
+
+#define CSGBA           WORD_REF(CSGBA_ADDR)
+#define CSGBB           WORD_REF(CSGBB_ADDR)
+#define CSGBC           WORD_REF(CSGBC_ADDR)
+#define CSGBD           WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR        0xfffff110
+#define CSB_ADDR        0xfffff112
+#define CSC_ADDR        0xfffff114
+#define CSD_ADDR        0xfffff116
+
+#define CSA             WORD_REF(CSA_ADDR)
+#define CSB             WORD_REF(CSB_ADDR)
+#define CSC             WORD_REF(CSC_ADDR)
+#define CSD             WORD_REF(CSD_ADDR)
+
+#define CSA_EN          0x0001          /* Chip-Select Enable */
+#define CSA_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK     0x0070          /* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW         0x0080          /* Data Bus Width */
+#define CSA_FLASH       0x0100          /* FLASH Memory Support */
+#define CSA_RO          0x8000          /* Read-Only */
+
+#define CSB_EN          0x0001          /* Chip-Select Enable */
+#define CSB_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK     0x0070          /* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW         0x0080          /* Data Bus Width */
+#define CSB_FLASH       0x0100          /* FLASH Memory Support */
+#define CSB_UPSIZ_MASK  0x1800          /* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP         0x2000          /* Readonly if protected */
+#define CSB_SOP         0x4000          /* Supervisor only if protected */
+#define CSB_RO          0x8000          /* Read-Only */
+
+#define CSC_EN          0x0001          /* Chip-Select Enable */
+#define CSC_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK     0x0070          /* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW         0x0080          /* Data Bus Width */
+#define CSC_FLASH       0x0100          /* FLASH Memory Support */
+#define CSC_UPSIZ_MASK  0x1800          /* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP         0x2000          /* Readonly if protected */
+#define CSC_SOP         0x4000          /* Supervisor only if protected */
+#define CSC_RO          0x8000          /* Read-Only */
+
+#define CSD_EN          0x0001          /* Chip-Select Enable */
+#define CSD_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK     0x0070          /* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW         0x0080          /* Data Bus Width */
+#define CSD_FLASH       0x0100          /* FLASH Memory Support */
+#define CSD_DRAM        0x0200          /* Dram Selection */
+#define CSD_COMB        0x0400          /* Combining */
+#define CSD_UPSIZ_MASK  0x1800          /* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP         0x2000          /* Readonly if protected */
+#define CSD_SOP         0x4000          /* Supervisor only if protected */
+#define CSD_RO          0x8000          /* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR      0xfffff118
+#define EMUCS           WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK   0x0070
+#define EMUCS_WS_SHIFT  4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR      0xfffff200
+#define PLLCR           WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL           0x0008   /* Disable PLL */
+#define PLLCR_CLKEN            0x0010   /* Clock (CLKO pin) enable */
+#define PLLCR_PRESC            0x0020   /* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700   /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800   /* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK   PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT  PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR     0xfffff202
+#define PLLFSR          WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK  0x00ff          /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK  0x0f00          /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT     0x4000          /* Protect P & Q */
+#define PLLFSR_CLK32    0x8000          /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR      0xfffff207
+#define PCTRL           BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK        0x1f    /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT       0
+#define PCTRL_PCEN              0x80    /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR        0xfffff300
+#define IVR             BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR        0xfffff302
+#define ICR             WORD_REF(ICR_ADDR)
+
+#define ICR_POL5        0x0080  /* Polarity Control for IRQ5 */
+#define ICR_ET6         0x0100  /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3         0x0200  /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2         0x0400  /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1         0x0800  /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6        0x1000  /* Polarity Control for IRQ6 */
+#define ICR_POL3        0x2000  /* Polarity Control for IRQ3 */
+#define ICR_POL2        0x4000  /* Polarity Control for IRQ2 */
+#define ICR_POL1        0x8000  /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR        0xfffff304
+#define IMR             LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI_IRQ_NUM     0       /* SPI interrupt */
+#define TMR_IRQ_NUM     1       /* Timer interrupt */
+#define UART_IRQ_NUM    2       /* UART interrupt */    
+#define WDT_IRQ_NUM     3       /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM     4       /* RTC interrupt */
+#define KB_IRQ_NUM      6       /* Keyboard Interrupt */
+#define PWM_IRQ_NUM     7       /* Pulse-Width Modulator int. */
+#define INT0_IRQ_NUM    8       /* External INT0 */
+#define INT1_IRQ_NUM    9       /* External INT1 */
+#define INT2_IRQ_NUM    10      /* External INT2 */
+#define INT3_IRQ_NUM    11      /* External INT3 */
+#define IRQ1_IRQ_NUM    16      /* IRQ1 */
+#define IRQ2_IRQ_NUM    17      /* IRQ2 */
+#define IRQ3_IRQ_NUM    18      /* IRQ3 */
+#define IRQ6_IRQ_NUM    19      /* IRQ6 */
+#define IRQ5_IRQ_NUM    20      /* IRQ5 */
+#define SAM_IRQ_NUM     22      /* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM    23      /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM    SPI_IRQ_NUM
+#define TMR1_IRQ_NUM    TMR_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI        (1 << SPI_IRQ_NUM)      /* Mask SPI interrupt */
+#define IMR_MTMR        (1 << TMR_IRQ_NUM)      /* Mask Timer interrupt */
+#define IMR_MUART       (1 << UART_IRQ_NUM)     /* Mask UART interrupt */       
+#define IMR_MWDT        (1 << WDT_IRQ_NUM)      /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC        (1 << RTC_IRQ_NUM)      /* Mask RTC interrupt */
+#define IMR_MKB         (1 << KB_IRQ_NUM)       /* Mask Keyboard Interrupt */
+#define IMR_MPWM        (1 << PWM_IRQ_NUM)      /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0       (1 << INT0_IRQ_NUM)     /* Mask External INT0 */
+#define IMR_MINT1       (1 << INT1_IRQ_NUM)     /* Mask External INT1 */
+#define IMR_MINT2       (1 << INT2_IRQ_NUM)     /* Mask External INT2 */
+#define IMR_MINT3       (1 << INT3_IRQ_NUM)     /* Mask External INT3 */
+#define IMR_MIRQ1       (1 << IRQ1_IRQ_NUM)     /* Mask IRQ1 */
+#define IMR_MIRQ2       (1 << IRQ2_IRQ_NUM)     /* Mask IRQ2 */
+#define IMR_MIRQ3       (1 << IRQ3_IRQ_NUM)     /* Mask IRQ3 */
+#define IMR_MIRQ6       (1 << IRQ6_IRQ_NUM)     /* Mask IRQ6 */
+#define IMR_MIRQ5       (1 << IRQ5_IRQ_NUM)     /* Mask IRQ5 */
+#define IMR_MSAM        (1 << SAM_IRQ_NUM)      /* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ       (1 << EMIQ_IRQ_NUM)     /* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM       IMR_MSPI
+#define IMR_MTMR1       IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR        0xfffff30c
+#define ISR             LONG_REF(ISR_ADDR)
+
+#define ISR_SPI         (1 << SPI_IRQ_NUM)      /* SPI interrupt */
+#define ISR_TMR         (1 << TMR_IRQ_NUM)      /* Timer interrupt */
+#define ISR_UART        (1 << UART_IRQ_NUM)     /* UART interrupt */    
+#define ISR_WDT         (1 << WDT_IRQ_NUM)      /* Watchdog Timer interrupt */
+#define ISR_RTC         (1 << RTC_IRQ_NUM)      /* RTC interrupt */
+#define ISR_KB          (1 << KB_IRQ_NUM)       /* Keyboard Interrupt */
+#define ISR_PWM         (1 << PWM_IRQ_NUM)      /* Pulse-Width Modulator interrupt */
+#define ISR_INT0        (1 << INT0_IRQ_NUM)     /* External INT0 */
+#define ISR_INT1        (1 << INT1_IRQ_NUM)     /* External INT1 */
+#define ISR_INT2        (1 << INT2_IRQ_NUM)     /* External INT2 */
+#define ISR_INT3        (1 << INT3_IRQ_NUM)     /* External INT3 */
+#define ISR_IRQ1        (1 << IRQ1_IRQ_NUM)     /* IRQ1 */
+#define ISR_IRQ2        (1 << IRQ2_IRQ_NUM)     /* IRQ2 */
+#define ISR_IRQ3        (1 << IRQ3_IRQ_NUM)     /* IRQ3 */
+#define ISR_IRQ6        (1 << IRQ6_IRQ_NUM)     /* IRQ6 */
+#define ISR_IRQ5        (1 << IRQ5_IRQ_NUM)     /* IRQ5 */
+#define ISR_SAM         (1 << SAM_IRQ_NUM)      /* Sampling Timer for RTC */
+#define ISR_EMIQ        (1 << EMIQ_IRQ_NUM)     /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM        ISR_SPI
+#define ISR_TMR1        ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR        0xfffff30c
+#define IPR             LONG_REF(IPR_ADDR)
+
+#define IPR_SPI         (1 << SPI_IRQ_NUM)      /* SPI interrupt */
+#define IPR_TMR         (1 << TMR_IRQ_NUM)      /* Timer interrupt */
+#define IPR_UART        (1 << UART_IRQ_NUM)     /* UART interrupt */    
+#define IPR_WDT         (1 << WDT_IRQ_NUM)      /* Watchdog Timer interrupt */
+#define IPR_RTC         (1 << RTC_IRQ_NUM)      /* RTC interrupt */
+#define IPR_KB          (1 << KB_IRQ_NUM)       /* Keyboard Interrupt */
+#define IPR_PWM         (1 << PWM_IRQ_NUM)      /* Pulse-Width Modulator interrupt */
+#define IPR_INT0        (1 << INT0_IRQ_NUM)     /* External INT0 */
+#define IPR_INT1        (1 << INT1_IRQ_NUM)     /* External INT1 */
+#define IPR_INT2        (1 << INT2_IRQ_NUM)     /* External INT2 */
+#define IPR_INT3        (1 << INT3_IRQ_NUM)     /* External INT3 */
+#define IPR_IRQ1        (1 << IRQ1_IRQ_NUM)     /* IRQ1 */
+#define IPR_IRQ2        (1 << IRQ2_IRQ_NUM)     /* IRQ2 */
+#define IPR_IRQ3        (1 << IRQ3_IRQ_NUM)     /* IRQ3 */
+#define IPR_IRQ6        (1 << IRQ6_IRQ_NUM)     /* IRQ6 */
+#define IPR_IRQ5        (1 << IRQ5_IRQ_NUM)     /* IRQ5 */
+#define IPR_SAM         (1 << SAM_IRQ_NUM)      /* Sampling Timer for RTC */
+#define IPR_EMIQ        (1 << EMIQ_IRQ_NUM)     /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM        IPR_SPI
+#define IPR_TMR1        IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR      0xfffff400              /* Port A direction reg */
+#define PADATA_ADDR     0xfffff401              /* Port A data register */
+#define PAPUEN_ADDR     0xfffff402              /* Port A Pull-Up enable reg */
+
+#define PADIR           BYTE_REF(PADIR_ADDR)
+#define PADATA          BYTE_REF(PADATA_ADDR)
+#define PAPUEN          BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)           (1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR      0xfffff408              /* Port B direction reg */
+#define PBDATA_ADDR     0xfffff409              /* Port B data register */
+#define PBPUEN_ADDR     0xfffff40a              /* Port B Pull-Up enable reg */
+#define PBSEL_ADDR      0xfffff40b              /* Port B Select Register */
+
+#define PBDIR           BYTE_REF(PBDIR_ADDR)
+#define PBDATA          BYTE_REF(PBDATA_ADDR)
+#define PBPUEN          BYTE_REF(PBPUEN_ADDR)
+#define PBSEL           BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)           (1 << (x))
+
+#define PB_CSB0         0x01    /* Use CSB0      as PB[0] */
+#define PB_CSB1         0x02    /* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0    0x04    /* Use CSC0/RAS0 as PB[2] */    
+#define PB_CSC1_RAS1    0x08    /* Use CSC1/RAS1 as PB[3] */    
+#define PB_CSD0_CAS0    0x10    /* Use CSD0/CAS0 as PB[4] */    
+#define PB_CSD1_CAS1    0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT     0x40    /* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO         0x80    /* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR      0xfffff410              /* Port C direction reg */
+#define PCDATA_ADDR     0xfffff411              /* Port C data register */
+#define PCPDEN_ADDR     0xfffff412              /* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR      0xfffff413              /* Port C Select Register */
+
+#define PCDIR           BYTE_REF(PCDIR_ADDR)
+#define PCDATA          BYTE_REF(PCDATA_ADDR)
+#define PCPDEN          BYTE_REF(PCPDEN_ADDR)
+#define PCSEL           BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)           (1 << (x))
+
+#define PC_LD0          0x01    /* Use LD0  as PC[0] */
+#define PC_LD1          0x02    /* Use LD1  as PC[1] */
+#define PC_LD2          0x04    /* Use LD2  as PC[2] */
+#define PC_LD3          0x08    /* Use LD3  as PC[3] */
+#define PC_LFLM         0x10    /* Use LFLM as PC[4] */
+#define PC_LLP          0x20    /* Use LLP  as PC[5] */
+#define PC_LCLK         0x40    /* Use LCLK as PC[6] */
+#define PC_LACD         0x80    /* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR      0xfffff418              /* Port D direction reg */
+#define PDDATA_ADDR     0xfffff419              /* Port D data register */
+#define PDPUEN_ADDR     0xfffff41a              /* Port D Pull-Up enable reg */
+#define PDSEL_ADDR      0xfffff41b              /* Port D Select Register */
+#define PDPOL_ADDR      0xfffff41c              /* Port D Polarity Register */
+#define PDIRQEN_ADDR    0xfffff41d              /* Port D IRQ enable register */
+#define PDKBEN_ADDR     0xfffff41e              /* Port D Keyboard Enable reg */
+#define PDIQEG_ADDR     0xfffff41f              /* Port D IRQ Edge Register */
+
+#define PDDIR           BYTE_REF(PDDIR_ADDR)
+#define PDDATA          BYTE_REF(PDDATA_ADDR)
+#define PDPUEN          BYTE_REF(PDPUEN_ADDR)
+#define PDSEL           BYTE_REF(PDSEL_ADDR)
+#define PDPOL           BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN         BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN          BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG          BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)           (1 << (x))
+
+#define PD_INT0         0x01    /* Use INT0 as PD[0] */
+#define PD_INT1         0x02    /* Use INT1 as PD[1] */
+#define PD_INT2         0x04    /* Use INT2 as PD[2] */
+#define PD_INT3         0x08    /* Use INT3 as PD[3] */
+#define PD_IRQ1         0x10    /* Use IRQ1 as PD[4] */
+#define PD_IRQ2         0x20    /* Use IRQ2 as PD[5] */
+#define PD_IRQ3         0x40    /* Use IRQ3 as PD[6] */
+#define PD_IRQ6         0x80    /* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR      0xfffff420              /* Port E direction reg */
+#define PEDATA_ADDR     0xfffff421              /* Port E data register */
+#define PEPUEN_ADDR     0xfffff422              /* Port E Pull-Up enable reg */
+#define PESEL_ADDR      0xfffff423              /* Port E Select Register */
+
+#define PEDIR           BYTE_REF(PEDIR_ADDR)
+#define PEDATA          BYTE_REF(PEDATA_ADDR)
+#define PEPUEN          BYTE_REF(PEPUEN_ADDR)
+#define PESEL           BYTE_REF(PESEL_ADDR)
+
+#define PE(x)           (1 << (x))
+
+#define PE_SPMTXD       0x01    /* Use SPMTXD as PE[0] */
+#define PE_SPMRXD       0x02    /* Use SPMRXD as PE[1] */
+#define PE_SPMCLK       0x04    /* Use SPMCLK as PE[2] */
+#define PE_DWE          0x08    /* Use DWE    as PE[3] */
+#define PE_RXD          0x10    /* Use RXD    as PE[4] */
+#define PE_TXD          0x20    /* Use TXD    as PE[5] */
+#define PE_RTS          0x40    /* Use RTS    as PE[6] */
+#define PE_CTS          0x80    /* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR      0xfffff428              /* Port F direction reg */
+#define PFDATA_ADDR     0xfffff429              /* Port F data register */
+#define PFPUEN_ADDR     0xfffff42a              /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR      0xfffff42b              /* Port F Select Register */
+
+#define PFDIR           BYTE_REF(PFDIR_ADDR)
+#define PFDATA          BYTE_REF(PFDATA_ADDR)
+#define PFPUEN          BYTE_REF(PFPUEN_ADDR)
+#define PFSEL           BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)           (1 << (x))
+
+#define PF_LCONTRAST    0x01    /* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1         0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR      0xfffff430              /* Port G direction reg */
+#define PGDATA_ADDR     0xfffff431              /* Port G data register */
+#define PGPUEN_ADDR     0xfffff432              /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR      0xfffff433              /* Port G Select Register */
+
+#define PGDIR           BYTE_REF(PGDIR_ADDR)
+#define PGDATA          BYTE_REF(PGDATA_ADDR)
+#define PGPUEN          BYTE_REF(PGPUEN_ADDR)
+#define PGSEL           BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)           (1 << (x))
+
+#define PG_BUSW_DTACK   0x01    /* Use BUSW/DTACK as PG[0] */
+#define PG_A0           0x02    /* Use A0         as PG[1] */
+#define PG_EMUIRQ       0x04    /* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D      0x08    /* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10    /* Use EMUCS      as PG[4] */
+#define PG_EMUBRK       0x20    /* Use EMUBRK     as PG[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register 
+ */
+#define PWMC_ADDR       0xfffff500
+#define PWMC            WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK        0x0003  /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT       0
+#define PWMC_REPEAT_MASK        0x000c  /* Sample Repeats */
+#define PWMC_REPEAT_SHIFT       2
+#define PWMC_EN                 0x0010  /* Enable PWM */
+#define PMNC_FIFOAV             0x0020  /* FIFO Available */
+#define PWMC_IRQEN              0x0040  /* Interrupt Request Enable */
+#define PWMC_IRQ                0x0080  /* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK     0x7f00  /* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT    8
+#define PWMC_CLKSRC             0x8000  /* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN      PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR       0xfffff502
+#define PWMS            WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR       0xfffff504
+#define PWMP            BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR     0xfffff505
+#define PWMCNT          BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR       0xfffff600
+#define TCTL            WORD_REF(TCTL_ADDR)
+
+#define TCTL_TEN                0x0001  /* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK     0x000e  /* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP      0x0000       /* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK    0x0002       /* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004       /* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN       0x0006       /* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ     0x0008       /* 32kHz clock to prescaler */
+#define TCTL_IRQEN              0x0010  /* IRQ Enable    */
+#define TCTL_OM                 0x0020  /* Output Mode   */
+#define TCTL_CAP_MASK           0x00c0  /* Capture Edge: */
+#define   TCTL_CAP_RE           0x0040          /* Capture on rizing edge   */
+#define   TCTL_CAP_FE           0x0080          /* Capture on falling edge  */
+#define TCTL_FRR                0x0010  /* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR      TCTL_ADDR
+#define TCTL1           TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR      0xfffff602
+#define TPRER           WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR     TPRER_ADDR
+#define TPRER1          TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR       0xfffff604
+#define TCMP            WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR      TCMP_ADDR
+#define TCMP1           TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR        0xfffff606
+#define TCR             WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR       TCR_ADDR
+#define TCR1            TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR        0xfffff608
+#define TCN             WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR       TCN_ADDR
+#define TCN1            TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR      0xfffff60a
+#define TSTAT           WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP      0x0001          /* Compare Event occurred */
+#define TSTAT_CAPT      0x0001          /* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR     TSTAT_ADDR
+#define TSTAT1          TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR   0xfffff800
+#define SPIMDATA        WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR   0xfffff802
+#define SPIMCONT        WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK  0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL             0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA             0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN           0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ             0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH             0x0100 /* Exchange */
+#define SPIMCONT_ENABLE          0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK  0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ        SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN         SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+#define USTCNT_ADDR     0xfffff900
+#define USTCNT          WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE     0x0001  /* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE     0x0002  /* Transmitter Half Empty Enable */
+#define USTCNT_TXEE     0x0004  /* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE     0x0008  /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE     0x0010  /* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE     0x0020  /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD     0x0040  /* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN     0x0080  /* Old Data Interrupt Enable */
+#define USTCNT_8_7      0x0100  /* Eight or seven-bit transmission */
+#define USTCNT_STOP     0x0200  /* Stop bit transmission */
+#define USTCNT_ODD      0x0400  /* Odd Parity */
+#define USTCNT_PEN      0x0800  /* Parity Enable */
+#define USTCNT_CLKM     0x1000  /* Clock Mode Select */
+#define USTCNT_TXEN     0x2000  /* Transmitter Enable */
+#define USTCNT_RXEN     0x4000  /* Receiver Enable */
+#define USTCNT_UEN      0x8000  /* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN        USTCNT_TXAE
+#define USTCNT_TXHALFEN         USTCNT_TXHE
+#define USTCNT_TXEMPTYEN        USTCNT_TXEE
+#define USTCNT_RXREADYEN        USTCNT_RXRE
+#define USTCNT_RXHALFEN         USTCNT_RXHE
+#define USTCNT_RXFULLEN         USTCNT_RXFE
+#define USTCNT_CTSDELTAEN       USTCNT_CTSD
+#define USTCNT_ODD_EVEN         USTCNT_ODD
+#define USTCNT_PARITYEN         USTCNT_PEN
+#define USTCNT_CLKMODE          USTCNT_CLKM
+#define USTCNT_UARTEN           USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR      0xfffff902
+#define UBAUD           WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK    0x003f  /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT   0
+#define UBAUD_DIVIDE_MASK       0x0700  /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT      8
+#define UBAUD_BAUD_SRC          0x0800  /* Baud Rate Source */
+#define UBAUD_UCLKDIR           0x2000  /* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR        0xfffff904
+#define URX             WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA      BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK  0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK        0x0200 /* Break Detected */
+#define URX_FRAME_ERROR  0x0400 /* Framing Error */
+#define URX_OVRUN        0x0800 /* Serial Overrun */
+#define URX_OLD_DATA     0x1000 /* Old data in FIFO */
+#define URX_DATA_READY   0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF    0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL    0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR        0xfffff906
+#define UTX             WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA      BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK  0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA    0x0100 /* CTS changed */
+#define UTX_CTS_STAT     0x0200 /* CTS State */
+#define UTX_BUSY         0x0400 /* FIFO is busy, sending a character */
+#define UTX_NOCTS        0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK   0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL     0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF    0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY   0x8000 /* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS  UTX_CTS_STAT
+#define UTX_IGNORE_CTS  UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR      0xfffff908
+#define UMISC           WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL     0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL     0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP  0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN    0x0020 /* Infra-Red Enable */
+#define UMISC_RTS        0x0040 /* Set RTS status */
+#define UMISC_RTSCONT    0x0080 /* Choose RTS control */
+#define UMISC_IR_TEST    0x0400 /* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP       0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC     0x4000 /* Clock Source */
+#define UMISC_BAUD_TEST  0x8000 /* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR       0xfffff90a
+#define NIPR            WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK    0x00ff  /* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT   0
+#define NIPR_SELECT_MASK        0x0700  /* Tap Selection */
+#define NIPR_SELECT_SHIFT       8
+#define NIPR_PRE_SEL            0x8000  /* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef volatile struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int pad1;
+  volatile unsigned short int pad2;
+} __attribute__((packed)) m68328_uart;
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR       0xfffffa00
+#define LSSA            LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK   0x1ffffffe      /* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR       0xfffffa05
+#define LVPW            BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR      0xfffffa08
+#define LXMAX           WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK   0x02f0          /* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR      0xfffffa0a
+#define LYMAX           WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK   0x01ff          /* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR       0xfffffa18
+#define LCXP            WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK    0xc000          /* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT   0x0000
+#define   LCXP_CC_BLACK         0x4000
+#define   LCXP_CC_REVERSED      0x8000
+#define   LCXP_CC_WHITE         0xc000
+#define LCXP_CXP_MASK   0x02ff          /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR       0xfffffa1a
+#define LCYP            WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK   0x01ff          /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR      0xfffffa1c
+#define LCWCH           WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK   0x001f          /* Cursor Height */
+#define LCWCH_CH_SHIFT  0
+#define LCWCH_CW_MASK   0x1f00          /* Cursor Width */
+#define LCWCH_CW_SHIFT  8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR      0xfffffa1f
+#define LBLKC           BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK   0x7f    /* Blink Divisor */
+#define LBLKC_BD_SHIFT  0
+#define LBLKC_BKEN      0x80    /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR      0xfffffa20
+#define LPICF           BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK    0x03    /* Gray-Scale Mode */
+#define   LPICF_GS_BW      0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c   /* Panel Bus Width */
+#define   LPICF_PBSIZ_1    0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR     0xfffffa21
+#define LPOLCF          BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL   0x01    /* Pixel Polarity */
+#define LPOLCF_LPPOL    0x02    /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL   0x04    /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL   0x08    /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR     0xfffffa23
+#define LACDRC          BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT    0x80   /* Signal Source Select */
+#define LACDRC_ACD_MASK  0x0f   /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR      0xfffffa25
+#define LPXCD           BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK  0x3f    /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR     0xfffffa27
+#define LCKCON          BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK  0x0f   /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH    0x40   /* Display Memory Width  */
+#define LCKCON_LCDON     0x80   /* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR       0xfffffa29
+#define LRRA            BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR      0xfffffa2d
+#define LPOSR           BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK  0x0f    /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR      0xfffffa31
+#define LFRCM           BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK  0x0f   /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK  0xf0   /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR      0xfffffa33
+#define LGPMR           BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK   0x0f
+#define LGPMR_G1_SHIFT  0
+#define LGPMR_G2_MASK   0xf0
+#define LGPMR_G2_SHIFT  4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR       0xfffffa36
+#define PWMR            WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK    0x00ff  /* Pulse Width */
+#define PWMR_PW_SHIFT   0
+#define PWMR_CCPEN      0x0100  /* Contrast Control Enable */
+#define PWMR_SRC_MASK   0x0600  /* Input Clock Source */
+#define   PWMR_SRC_LINE   0x0000        /* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200        /* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000        /* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR    0xfffffb00
+#define RTCTIME         LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCTIME_SECONDS_SHIFT   0
+#define RTCTIME_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCTIME_MINUTES_SHIFT   16
+#define RTCTIME_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCTIME_HOURS_SHIFT     24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR   0xfffffb0a
+#define WATCHDOG        WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN     0x0001  /* Watchdog Enabled */
+#define WATCHDOG_ISEL   0x0002  /* Select the watchdog interrupt */
+#define WATCHDOG_INTF   0x0080  /* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300       /* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR     0xfffffb0c
+#define RTCCTL          WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL      0x0020  /* Crystal Selection */
+#define RTCCTL_EN       0x0080  /* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384      RTCCTL_XTL
+#define RTCCTL_ENABLE   RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR     0xfffffb0e
+#define RTCISR          WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW       0x0001  /* Stopwatch timed out */
+#define RTCISR_MIN      0x0002  /* 1-minute interrupt has occurred */
+#define RTCISR_ALM      0x0004  /* Alarm interrupt has occurred */
+#define RTCISR_DAY      0x0008  /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ      0x0010  /* 1Hz interrupt has occurred */
+#define RTCISR_HR       0x0020  /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0     0x0100  /*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1     0x0200  /*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2     0x0400  /*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3     0x0800  /*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4     0x1000  /*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5     0x2000  /* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6     0x4000  /* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7     0x8000  /* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR    0xfffffb10
+#define RTCIENR         WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW      0x0001  /* Stopwatch interrupt enable */
+#define RTCIENR_MIN     0x0002  /* 1-minute interrupt enable */
+#define RTCIENR_ALM     0x0004  /* Alarm interrupt enable */
+#define RTCIENR_DAY     0x0008  /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ     0x0010  /* 1Hz interrupt enable */
+#define RTCIENR_HR      0x0020  /* 1-hour interrupt enable */
+#define RTCIENR_SAM0    0x0100  /*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1    0x0200  /*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2    0x0400  /*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3    0x0800  /*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4    0x1000  /*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5    0x2000  /* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6    0x4000  /* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7    0x8000  /* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR     0xfffffb12
+#define STPWCH          WORD_REF(STPWCH)
+
+#define STPWCH_CNT_MASK  0x003f /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR       0xfffffb1a
+#define DAYR            WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK  0x1ff   /* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR   0xfffffb1c
+#define DAYALARM        WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK    0x01ff  /* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT   0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR     0xfffffc00
+#define DRAMMC          WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK       0xc000  /* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10     0x0000
+#define   DRAMMC_ROW12_PA21     0x4000  
+#define   DRAMMC_ROW12_PA23     0x8000
+#define DRAMMC_ROW0_MASK        0x3000  /* Row address bit for MD0 */
+#define   DRAMMC_ROW0_PA11      0x0000
+#define   DRAMMC_ROW0_PA22      0x1000
+#define   DRAMMC_ROW0_PA23      0x2000
+#define DRAMMC_ROW11            0x0800  /* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10            0x0400  /* Row address bit for MD10 PA19/PA21 */
+#define DRAMMC_ROW9             0x0200  /* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8             0x0100  /* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10            0x0080  /* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9             0x0040  /* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8             0x0020  /* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK         0x001f  /* Reresh Cycle */
+#define DRAMMC_REF_SHIFT        0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR      0xfffffc02
+#define DRAMC           WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE          0x0001       /* DRAM Write Enable */
+#define DRAMC_RST          0x0002       /* Reset Burst Refresh Enable */
+#define DRAMC_LPR          0x0004       /* Low-Power Refresh Enable */
+#define DRAMC_SLW          0x0008       /* Slow RAM */
+#define DRAMC_LSP          0x0010       /* Light Sleep */
+#define DRAMC_MSW          0x0020       /* Slow Multiplexing */
+#define DRAMC_WS_MASK      0x00c0       /* Wait-states */
+#define DRAMC_WS_SHIFT     6
+#define DRAMC_PGSZ_MASK    0x0300       /* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000       
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define   DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO          0x0400       /* EDO DRAM */
+#define DRAMC_CLK          0x0800       /* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK      0x3000       /* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT     12
+#define DRAMC_RM           0x4000       /* Refresh Mode */
+#define DRAMC_EN           0x8000       /* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR    0xfffffd00
+#define ICEMACR         LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR    0xfffffd04
+#define ICEMAMR         LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR    0xfffffd08
+#define ICEMCCR         WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD      0x0001  /* Program/Data Cycle Selection */
+#define ICEMCCR_RW      0x0002  /* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR    0xfffffd0a
+#define ICEMCMR         WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM     0x0001  /* Program/Data Cycle Mask */
+#define ICEMCMR_RWM     0x0002  /* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR     0xfffffd0c
+#define ICEMCR          WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN      0x0001  /* Compare Enable */
+#define ICEMCR_PBEN     0x0002  /* Program Break Enable */
+#define ICEMCR_SB       0x0004  /* Single Breakpoint */
+#define ICEMCR_HMDIS    0x0008  /* HardMap disable */
+#define ICEMCR_BBIEN    0x0010  /* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR     0xfffffd0e
+#define ICEMSR          WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN    0x0001  /* Emulation Enable */
+#define ICEMSR_BRKIRQ   0x0002  /* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ    0x0004  /* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ    0x0008  /* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68EZ328_H_ */
diff --git a/arch/m68k/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h
new file mode 100644
index 000000000000..2b9bf626a0a5
--- /dev/null
+++ b/arch/m68k/include/asm/MC68VZ328.h
@@ -0,0 +1,1349 @@
+
+/* include/asm-m68knommu/MC68VZ328.h: 'VZ328 control registers
+ *
+ * Copyright (c) 2000-2001      Lineo Inc. <www.lineo.com>
+ * Copyright (c) 2000-2001      Lineo Canada Corp. <www.lineo.ca>
+ * Copyright (C) 1999           Vladimir Gurevich <vgurevic@cisco.com>
+ *                              Bare & Hare Software, Inc.
+ * Based on include/asm-m68knommu/MC68332.h
+ * Copyright (C) 1998  Kenneth Albanowski <kjahds@kjahds.com>,
+ *                     The Silver Hammer Group, Ltd.
+ *
+ * M68VZ328 fixes by Evan Stawnyczy <evan@lineo.com>
+ * vz multiport fixes by Michael Leslie <mleslie@lineo.com>
+ */
+
+#ifndef _MC68VZ328_H_
+#define _MC68VZ328_H_
+
+#define BYTE_REF(addr) (*((volatile unsigned char*)addr))
+#define WORD_REF(addr) (*((volatile unsigned short*)addr))
+#define LONG_REF(addr) (*((volatile unsigned long*)addr))
+
+#define PUT_FIELD(field, val) (((val) << field##_SHIFT) & field##_MASK)
+#define GET_FIELD(reg, field) (((reg) & field##_MASK) >> field##_SHIFT)
+
+/********** 
+ *
+ * 0xFFFFF0xx -- System Control
+ *
+ **********/
+ 
+/*
+ * System Control Register (SCR)
+ */
+#define SCR_ADDR        0xfffff000
+#define SCR             BYTE_REF(SCR_ADDR)
+
+#define SCR_WDTH8       0x01    /* 8-Bit Width Select */
+#define SCR_DMAP        0x04    /* Double Map */
+#define SCR_SO          0x08    /* Supervisor Only */
+#define SCR_BETEN       0x10    /* Bus-Error Time-Out Enable */
+#define SCR_PRV         0x20    /* Privilege Violation */
+#define SCR_WPV         0x40    /* Write Protect Violation */
+#define SCR_BETO        0x80    /* Bus-Error TimeOut */
+
+/*
+ * Silicon ID Register (Mask Revision Register (MRR) for '328 Compatibility)
+ */
+#define MRR_ADDR 0xfffff004
+#define MRR      LONG_REF(MRR_ADDR)
+
+/********** 
+ *
+ * 0xFFFFF1xx -- Chip-Select logic
+ *
+ **********/
+ 
+/*
+ * Chip Select Group Base Registers 
+ */
+#define CSGBA_ADDR      0xfffff100
+#define CSGBB_ADDR      0xfffff102
+
+#define CSGBC_ADDR      0xfffff104
+#define CSGBD_ADDR      0xfffff106
+
+#define CSGBA           WORD_REF(CSGBA_ADDR)
+#define CSGBB           WORD_REF(CSGBB_ADDR)
+#define CSGBC           WORD_REF(CSGBC_ADDR)
+#define CSGBD           WORD_REF(CSGBD_ADDR)
+
+/*
+ * Chip Select Registers 
+ */
+#define CSA_ADDR        0xfffff110
+#define CSB_ADDR        0xfffff112
+#define CSC_ADDR        0xfffff114
+#define CSD_ADDR        0xfffff116
+
+#define CSA             WORD_REF(CSA_ADDR)
+#define CSB             WORD_REF(CSB_ADDR)
+#define CSC             WORD_REF(CSC_ADDR)
+#define CSD             WORD_REF(CSD_ADDR)
+
+#define CSA_EN          0x0001          /* Chip-Select Enable */
+#define CSA_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSA_SIZ_SHIFT   1
+#define CSA_WS_MASK     0x0070          /* Wait State */
+#define CSA_WS_SHIFT    4
+#define CSA_BSW         0x0080          /* Data Bus Width */
+#define CSA_FLASH       0x0100          /* FLASH Memory Support */
+#define CSA_RO          0x8000          /* Read-Only */
+
+#define CSB_EN          0x0001          /* Chip-Select Enable */
+#define CSB_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSB_SIZ_SHIFT   1
+#define CSB_WS_MASK     0x0070          /* Wait State */
+#define CSB_WS_SHIFT    4
+#define CSB_BSW         0x0080          /* Data Bus Width */
+#define CSB_FLASH       0x0100          /* FLASH Memory Support */
+#define CSB_UPSIZ_MASK  0x1800          /* Unprotected memory block size */
+#define CSB_UPSIZ_SHIFT 11
+#define CSB_ROP         0x2000          /* Readonly if protected */
+#define CSB_SOP         0x4000          /* Supervisor only if protected */
+#define CSB_RO          0x8000          /* Read-Only */
+
+#define CSC_EN          0x0001          /* Chip-Select Enable */
+#define CSC_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSC_SIZ_SHIFT   1
+#define CSC_WS_MASK     0x0070          /* Wait State */
+#define CSC_WS_SHIFT    4
+#define CSC_BSW         0x0080          /* Data Bus Width */
+#define CSC_FLASH       0x0100          /* FLASH Memory Support */
+#define CSC_UPSIZ_MASK  0x1800          /* Unprotected memory block size */
+#define CSC_UPSIZ_SHIFT 11
+#define CSC_ROP         0x2000          /* Readonly if protected */
+#define CSC_SOP         0x4000          /* Supervisor only if protected */
+#define CSC_RO          0x8000          /* Read-Only */
+
+#define CSD_EN          0x0001          /* Chip-Select Enable */
+#define CSD_SIZ_MASK    0x000e          /* Chip-Select Size */
+#define CSD_SIZ_SHIFT   1
+#define CSD_WS_MASK     0x0070          /* Wait State */
+#define CSD_WS_SHIFT    4
+#define CSD_BSW         0x0080          /* Data Bus Width */
+#define CSD_FLASH       0x0100          /* FLASH Memory Support */
+#define CSD_DRAM        0x0200          /* Dram Selection */
+#define CSD_COMB        0x0400          /* Combining */
+#define CSD_UPSIZ_MASK  0x1800          /* Unprotected memory block size */
+#define CSD_UPSIZ_SHIFT 11
+#define CSD_ROP         0x2000          /* Readonly if protected */
+#define CSD_SOP         0x4000          /* Supervisor only if protected */
+#define CSD_RO          0x8000          /* Read-Only */
+
+/*
+ * Emulation Chip-Select Register 
+ */
+#define EMUCS_ADDR      0xfffff118
+#define EMUCS           WORD_REF(EMUCS_ADDR)
+
+#define EMUCS_WS_MASK   0x0070
+#define EMUCS_WS_SHIFT  4
+
+/********** 
+ *
+ * 0xFFFFF2xx -- Phase Locked Loop (PLL) & Power Control
+ *
+ **********/
+
+/*
+ * PLL Control Register 
+ */
+#define PLLCR_ADDR      0xfffff200
+#define PLLCR           WORD_REF(PLLCR_ADDR)
+
+#define PLLCR_DISPLL           0x0008   /* Disable PLL */
+#define PLLCR_CLKEN            0x0010   /* Clock (CLKO pin) enable */
+#define PLLCR_PRESC            0x0020   /* VCO prescaler */
+#define PLLCR_SYSCLK_SEL_MASK  0x0700   /* System Clock Selection */
+#define PLLCR_SYSCLK_SEL_SHIFT 8
+#define PLLCR_LCDCLK_SEL_MASK  0x3800   /* LCD Clock Selection */
+#define PLLCR_LCDCLK_SEL_SHIFT 11
+
+/* '328-compatible definitions */
+#define PLLCR_PIXCLK_SEL_MASK   PLLCR_LCDCLK_SEL_MASK
+#define PLLCR_PIXCLK_SEL_SHIFT  PLLCR_LCDCLK_SEL_SHIFT
+
+/*
+ * PLL Frequency Select Register
+ */
+#define PLLFSR_ADDR     0xfffff202
+#define PLLFSR          WORD_REF(PLLFSR_ADDR)
+
+#define PLLFSR_PC_MASK  0x00ff          /* P Count */
+#define PLLFSR_PC_SHIFT 0
+#define PLLFSR_QC_MASK  0x0f00          /* Q Count */
+#define PLLFSR_QC_SHIFT 8
+#define PLLFSR_PROT     0x4000          /* Protect P & Q */
+#define PLLFSR_CLK32    0x8000          /* Clock 32 (kHz) */
+
+/*
+ * Power Control Register
+ */
+#define PCTRL_ADDR      0xfffff207
+#define PCTRL           BYTE_REF(PCTRL_ADDR)
+
+#define PCTRL_WIDTH_MASK        0x1f    /* CPU Clock bursts width */
+#define PCTRL_WIDTH_SHIFT       0
+#define PCTRL_PCEN              0x80    /* Power Control Enable */
+
+/**********
+ *
+ * 0xFFFFF3xx -- Interrupt Controller
+ *
+ **********/
+
+/* 
+ * Interrupt Vector Register
+ */
+#define IVR_ADDR        0xfffff300
+#define IVR             BYTE_REF(IVR_ADDR)
+
+#define IVR_VECTOR_MASK 0xF8
+
+/*
+ * Interrupt control Register
+ */
+#define ICR_ADDR        0xfffff302
+#define ICR             WORD_REF(ICR_ADDR)
+
+#define ICR_POL5        0x0080  /* Polarity Control for IRQ5 */
+#define ICR_ET6         0x0100  /* Edge Trigger Select for IRQ6 */
+#define ICR_ET3         0x0200  /* Edge Trigger Select for IRQ3 */
+#define ICR_ET2         0x0400  /* Edge Trigger Select for IRQ2 */
+#define ICR_ET1         0x0800  /* Edge Trigger Select for IRQ1 */
+#define ICR_POL6        0x1000  /* Polarity Control for IRQ6 */
+#define ICR_POL3        0x2000  /* Polarity Control for IRQ3 */
+#define ICR_POL2        0x4000  /* Polarity Control for IRQ2 */
+#define ICR_POL1        0x8000  /* Polarity Control for IRQ1 */
+
+/*
+ * Interrupt Mask Register
+ */
+#define IMR_ADDR        0xfffff304
+#define IMR             LONG_REF(IMR_ADDR)
+
+/*
+ * Define the names for bit positions first. This is useful for 
+ * request_irq
+ */
+#define SPI2_IRQ_NUM    0       /* SPI 2 interrupt */
+#define TMR_IRQ_NUM     1       /* Timer 1 interrupt */
+#define UART1_IRQ_NUM   2       /* UART 1 interrupt */  
+#define WDT_IRQ_NUM     3       /* Watchdog Timer interrupt */
+#define RTC_IRQ_NUM     4       /* RTC interrupt */
+#define TMR2_IRQ_NUM    5       /* Timer 2 interrupt */
+#define KB_IRQ_NUM      6       /* Keyboard Interrupt */
+#define PWM1_IRQ_NUM    7       /* Pulse-Width Modulator 1 int. */
+#define INT0_IRQ_NUM    8       /* External INT0 */
+#define INT1_IRQ_NUM    9       /* External INT1 */
+#define INT2_IRQ_NUM    10      /* External INT2 */
+#define INT3_IRQ_NUM    11      /* External INT3 */
+#define UART2_IRQ_NUM   12      /* UART 2 interrupt */  
+#define PWM2_IRQ_NUM    13      /* Pulse-Width Modulator 1 int. */
+#define IRQ1_IRQ_NUM    16      /* IRQ1 */
+#define IRQ2_IRQ_NUM    17      /* IRQ2 */
+#define IRQ3_IRQ_NUM    18      /* IRQ3 */
+#define IRQ6_IRQ_NUM    19      /* IRQ6 */
+#define IRQ5_IRQ_NUM    20      /* IRQ5 */
+#define SPI1_IRQ_NUM    21      /* SPI 1 interrupt */
+#define SAM_IRQ_NUM     22      /* Sampling Timer for RTC */
+#define EMIQ_IRQ_NUM    23      /* Emulator Interrupt */
+
+#define SPI_IRQ_NUM     SPI2_IRQ_NUM
+
+/* '328-compatible definitions */
+#define SPIM_IRQ_NUM    SPI_IRQ_NUM
+#define TMR1_IRQ_NUM    TMR_IRQ_NUM
+#define UART_IRQ_NUM    UART1_IRQ_NUM
+
+/* 
+ * Here go the bitmasks themselves
+ */
+#define IMR_MSPI        (1 << SPI_IRQ_NUM)      /* Mask SPI interrupt */
+#define IMR_MTMR        (1 << TMR_IRQ_NUM)      /* Mask Timer interrupt */
+#define IMR_MUART       (1 << UART_IRQ_NUM)     /* Mask UART interrupt */       
+#define IMR_MWDT        (1 << WDT_IRQ_NUM)      /* Mask Watchdog Timer interrupt */
+#define IMR_MRTC        (1 << RTC_IRQ_NUM)      /* Mask RTC interrupt */
+#define IMR_MKB         (1 << KB_IRQ_NUM)       /* Mask Keyboard Interrupt */
+#define IMR_MPWM        (1 << PWM_IRQ_NUM)      /* Mask Pulse-Width Modulator int. */
+#define IMR_MINT0       (1 << INT0_IRQ_NUM)     /* Mask External INT0 */
+#define IMR_MINT1       (1 << INT1_IRQ_NUM)     /* Mask External INT1 */
+#define IMR_MINT2       (1 << INT2_IRQ_NUM)     /* Mask External INT2 */
+#define IMR_MINT3       (1 << INT3_IRQ_NUM)     /* Mask External INT3 */
+#define IMR_MIRQ1       (1 << IRQ1_IRQ_NUM)     /* Mask IRQ1 */
+#define IMR_MIRQ2       (1 << IRQ2_IRQ_NUM)     /* Mask IRQ2 */
+#define IMR_MIRQ3       (1 << IRQ3_IRQ_NUM)     /* Mask IRQ3 */
+#define IMR_MIRQ6       (1 << IRQ6_IRQ_NUM)     /* Mask IRQ6 */
+#define IMR_MIRQ5       (1 << IRQ5_IRQ_NUM)     /* Mask IRQ5 */
+#define IMR_MSAM        (1 << SAM_IRQ_NUM)      /* Mask Sampling Timer for RTC */
+#define IMR_MEMIQ       (1 << EMIQ_IRQ_NUM)     /* Mask Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IMR_MSPIM       IMR_MSPI
+#define IMR_MTMR1       IMR_MTMR
+
+/* 
+ * Interrupt Status Register 
+ */
+#define ISR_ADDR        0xfffff30c
+#define ISR             LONG_REF(ISR_ADDR)
+
+#define ISR_SPI         (1 << SPI_IRQ_NUM)      /* SPI interrupt */
+#define ISR_TMR         (1 << TMR_IRQ_NUM)      /* Timer interrupt */
+#define ISR_UART        (1 << UART_IRQ_NUM)     /* UART interrupt */    
+#define ISR_WDT         (1 << WDT_IRQ_NUM)      /* Watchdog Timer interrupt */
+#define ISR_RTC         (1 << RTC_IRQ_NUM)      /* RTC interrupt */
+#define ISR_KB          (1 << KB_IRQ_NUM)       /* Keyboard Interrupt */
+#define ISR_PWM         (1 << PWM_IRQ_NUM)      /* Pulse-Width Modulator interrupt */
+#define ISR_INT0        (1 << INT0_IRQ_NUM)     /* External INT0 */
+#define ISR_INT1        (1 << INT1_IRQ_NUM)     /* External INT1 */
+#define ISR_INT2        (1 << INT2_IRQ_NUM)     /* External INT2 */
+#define ISR_INT3        (1 << INT3_IRQ_NUM)     /* External INT3 */
+#define ISR_IRQ1        (1 << IRQ1_IRQ_NUM)     /* IRQ1 */
+#define ISR_IRQ2        (1 << IRQ2_IRQ_NUM)     /* IRQ2 */
+#define ISR_IRQ3        (1 << IRQ3_IRQ_NUM)     /* IRQ3 */
+#define ISR_IRQ6        (1 << IRQ6_IRQ_NUM)     /* IRQ6 */
+#define ISR_IRQ5        (1 << IRQ5_IRQ_NUM)     /* IRQ5 */
+#define ISR_SAM         (1 << SAM_IRQ_NUM)      /* Sampling Timer for RTC */
+#define ISR_EMIQ        (1 << EMIQ_IRQ_NUM)     /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define ISR_SPIM        ISR_SPI
+#define ISR_TMR1        ISR_TMR
+
+/* 
+ * Interrupt Pending Register 
+ */
+#define IPR_ADDR        0xfffff30c
+#define IPR             LONG_REF(IPR_ADDR)
+
+#define IPR_SPI         (1 << SPI_IRQ_NUM)      /* SPI interrupt */
+#define IPR_TMR         (1 << TMR_IRQ_NUM)      /* Timer interrupt */
+#define IPR_UART        (1 << UART_IRQ_NUM)     /* UART interrupt */    
+#define IPR_WDT         (1 << WDT_IRQ_NUM)      /* Watchdog Timer interrupt */
+#define IPR_RTC         (1 << RTC_IRQ_NUM)      /* RTC interrupt */
+#define IPR_KB          (1 << KB_IRQ_NUM)       /* Keyboard Interrupt */
+#define IPR_PWM         (1 << PWM_IRQ_NUM)      /* Pulse-Width Modulator interrupt */
+#define IPR_INT0        (1 << INT0_IRQ_NUM)     /* External INT0 */
+#define IPR_INT1        (1 << INT1_IRQ_NUM)     /* External INT1 */
+#define IPR_INT2        (1 << INT2_IRQ_NUM)     /* External INT2 */
+#define IPR_INT3        (1 << INT3_IRQ_NUM)     /* External INT3 */
+#define IPR_IRQ1        (1 << IRQ1_IRQ_NUM)     /* IRQ1 */
+#define IPR_IRQ2        (1 << IRQ2_IRQ_NUM)     /* IRQ2 */
+#define IPR_IRQ3        (1 << IRQ3_IRQ_NUM)     /* IRQ3 */
+#define IPR_IRQ6        (1 << IRQ6_IRQ_NUM)     /* IRQ6 */
+#define IPR_IRQ5        (1 << IRQ5_IRQ_NUM)     /* IRQ5 */
+#define IPR_SAM         (1 << SAM_IRQ_NUM)      /* Sampling Timer for RTC */
+#define IPR_EMIQ        (1 << EMIQ_IRQ_NUM)     /* Emulator Interrupt */
+
+/* '328-compatible definitions */
+#define IPR_SPIM        IPR_SPI
+#define IPR_TMR1        IPR_TMR
+
+/**********
+ *
+ * 0xFFFFF4xx -- Parallel Ports
+ *
+ **********/
+
+/*
+ * Port A
+ */
+#define PADIR_ADDR      0xfffff400              /* Port A direction reg */
+#define PADATA_ADDR     0xfffff401              /* Port A data register */
+#define PAPUEN_ADDR     0xfffff402              /* Port A Pull-Up enable reg */
+
+#define PADIR           BYTE_REF(PADIR_ADDR)
+#define PADATA          BYTE_REF(PADATA_ADDR)
+#define PAPUEN          BYTE_REF(PAPUEN_ADDR)
+
+#define PA(x)           (1 << (x))
+
+/* 
+ * Port B
+ */
+#define PBDIR_ADDR      0xfffff408              /* Port B direction reg */
+#define PBDATA_ADDR     0xfffff409              /* Port B data register */
+#define PBPUEN_ADDR     0xfffff40a              /* Port B Pull-Up enable reg */
+#define PBSEL_ADDR      0xfffff40b              /* Port B Select Register */
+
+#define PBDIR           BYTE_REF(PBDIR_ADDR)
+#define PBDATA          BYTE_REF(PBDATA_ADDR)
+#define PBPUEN          BYTE_REF(PBPUEN_ADDR)
+#define PBSEL           BYTE_REF(PBSEL_ADDR)
+
+#define PB(x)           (1 << (x))
+
+#define PB_CSB0         0x01    /* Use CSB0      as PB[0] */
+#define PB_CSB1         0x02    /* Use CSB1      as PB[1] */
+#define PB_CSC0_RAS0    0x04    /* Use CSC0/RAS0 as PB[2] */    
+#define PB_CSC1_RAS1    0x08    /* Use CSC1/RAS1 as PB[3] */    
+#define PB_CSD0_CAS0    0x10    /* Use CSD0/CAS0 as PB[4] */    
+#define PB_CSD1_CAS1    0x20    /* Use CSD1/CAS1 as PB[5] */
+#define PB_TIN_TOUT     0x40    /* Use TIN/TOUT  as PB[6] */
+#define PB_PWMO         0x80    /* Use PWMO      as PB[7] */
+
+/* 
+ * Port C
+ */
+#define PCDIR_ADDR      0xfffff410              /* Port C direction reg */
+#define PCDATA_ADDR     0xfffff411              /* Port C data register */
+#define PCPDEN_ADDR     0xfffff412              /* Port C Pull-Down enb. reg */
+#define PCSEL_ADDR      0xfffff413              /* Port C Select Register */
+
+#define PCDIR           BYTE_REF(PCDIR_ADDR)
+#define PCDATA          BYTE_REF(PCDATA_ADDR)
+#define PCPDEN          BYTE_REF(PCPDEN_ADDR)
+#define PCSEL           BYTE_REF(PCSEL_ADDR)
+
+#define PC(x)           (1 << (x))
+
+#define PC_LD0          0x01    /* Use LD0  as PC[0] */
+#define PC_LD1          0x02    /* Use LD1  as PC[1] */
+#define PC_LD2          0x04    /* Use LD2  as PC[2] */
+#define PC_LD3          0x08    /* Use LD3  as PC[3] */
+#define PC_LFLM         0x10    /* Use LFLM as PC[4] */
+#define PC_LLP          0x20    /* Use LLP  as PC[5] */
+#define PC_LCLK         0x40    /* Use LCLK as PC[6] */
+#define PC_LACD         0x80    /* Use LACD as PC[7] */
+
+/* 
+ * Port D
+ */
+#define PDDIR_ADDR      0xfffff418              /* Port D direction reg */
+#define PDDATA_ADDR     0xfffff419              /* Port D data register */
+#define PDPUEN_ADDR     0xfffff41a              /* Port D Pull-Up enable reg */
+#define PDSEL_ADDR      0xfffff41b              /* Port D Select Register */
+#define PDPOL_ADDR      0xfffff41c              /* Port D Polarity Register */
+#define PDIRQEN_ADDR    0xfffff41d              /* Port D IRQ enable register */
+#define PDKBEN_ADDR     0xfffff41e              /* Port D Keyboard Enable reg */
+#define PDIQEG_ADDR     0xfffff41f              /* Port D IRQ Edge Register */
+
+#define PDDIR           BYTE_REF(PDDIR_ADDR)
+#define PDDATA          BYTE_REF(PDDATA_ADDR)
+#define PDPUEN          BYTE_REF(PDPUEN_ADDR)
+#define PDSEL           BYTE_REF(PDSEL_ADDR)
+#define PDPOL           BYTE_REF(PDPOL_ADDR)
+#define PDIRQEN         BYTE_REF(PDIRQEN_ADDR)
+#define PDKBEN          BYTE_REF(PDKBEN_ADDR)
+#define PDIQEG          BYTE_REF(PDIQEG_ADDR)
+
+#define PD(x)           (1 << (x))
+
+#define PD_INT0         0x01    /* Use INT0 as PD[0] */
+#define PD_INT1         0x02    /* Use INT1 as PD[1] */
+#define PD_INT2         0x04    /* Use INT2 as PD[2] */
+#define PD_INT3         0x08    /* Use INT3 as PD[3] */
+#define PD_IRQ1         0x10    /* Use IRQ1 as PD[4] */
+#define PD_IRQ2         0x20    /* Use IRQ2 as PD[5] */
+#define PD_IRQ3         0x40    /* Use IRQ3 as PD[6] */
+#define PD_IRQ6         0x80    /* Use IRQ6 as PD[7] */
+
+/* 
+ * Port E
+ */
+#define PEDIR_ADDR      0xfffff420              /* Port E direction reg */
+#define PEDATA_ADDR     0xfffff421              /* Port E data register */
+#define PEPUEN_ADDR     0xfffff422              /* Port E Pull-Up enable reg */
+#define PESEL_ADDR      0xfffff423              /* Port E Select Register */
+
+#define PEDIR           BYTE_REF(PEDIR_ADDR)
+#define PEDATA          BYTE_REF(PEDATA_ADDR)
+#define PEPUEN          BYTE_REF(PEPUEN_ADDR)
+#define PESEL           BYTE_REF(PESEL_ADDR)
+
+#define PE(x)           (1 << (x))
+
+#define PE_SPMTXD       0x01    /* Use SPMTXD as PE[0] */
+#define PE_SPMRXD       0x02    /* Use SPMRXD as PE[1] */
+#define PE_SPMCLK       0x04    /* Use SPMCLK as PE[2] */
+#define PE_DWE          0x08    /* Use DWE    as PE[3] */
+#define PE_RXD          0x10    /* Use RXD    as PE[4] */
+#define PE_TXD          0x20    /* Use TXD    as PE[5] */
+#define PE_RTS          0x40    /* Use RTS    as PE[6] */
+#define PE_CTS          0x80    /* Use CTS    as PE[7] */
+
+/* 
+ * Port F
+ */
+#define PFDIR_ADDR      0xfffff428              /* Port F direction reg */
+#define PFDATA_ADDR     0xfffff429              /* Port F data register */
+#define PFPUEN_ADDR     0xfffff42a              /* Port F Pull-Up enable reg */
+#define PFSEL_ADDR      0xfffff42b              /* Port F Select Register */
+
+#define PFDIR           BYTE_REF(PFDIR_ADDR)
+#define PFDATA          BYTE_REF(PFDATA_ADDR)
+#define PFPUEN          BYTE_REF(PFPUEN_ADDR)
+#define PFSEL           BYTE_REF(PFSEL_ADDR)
+
+#define PF(x)           (1 << (x))
+
+#define PF_LCONTRAST    0x01    /* Use LCONTRAST as PF[0] */
+#define PF_IRQ5         0x02    /* Use IRQ5      as PF[1] */
+#define PF_CLKO         0x04    /* Use CLKO      as PF[2] */
+#define PF_A20          0x08    /* Use A20       as PF[3] */
+#define PF_A21          0x10    /* Use A21       as PF[4] */
+#define PF_A22          0x20    /* Use A22       as PF[5] */
+#define PF_A23          0x40    /* Use A23       as PF[6] */
+#define PF_CSA1         0x80    /* Use CSA1      as PF[7] */
+
+/* 
+ * Port G
+ */
+#define PGDIR_ADDR      0xfffff430              /* Port G direction reg */
+#define PGDATA_ADDR     0xfffff431              /* Port G data register */
+#define PGPUEN_ADDR     0xfffff432              /* Port G Pull-Up enable reg */
+#define PGSEL_ADDR      0xfffff433              /* Port G Select Register */
+
+#define PGDIR           BYTE_REF(PGDIR_ADDR)
+#define PGDATA          BYTE_REF(PGDATA_ADDR)
+#define PGPUEN          BYTE_REF(PGPUEN_ADDR)
+#define PGSEL           BYTE_REF(PGSEL_ADDR)
+
+#define PG(x)           (1 << (x))
+
+#define PG_BUSW_DTACK   0x01    /* Use BUSW/DTACK as PG[0] */
+#define PG_A0           0x02    /* Use A0         as PG[1] */
+#define PG_EMUIRQ       0x04    /* Use EMUIRQ     as PG[2] */
+#define PG_HIZ_P_D      0x08    /* Use HIZ/P/D    as PG[3] */
+#define PG_EMUCS        0x10    /* Use EMUCS      as PG[4] */
+#define PG_EMUBRK       0x20    /* Use EMUBRK     as PG[5] */
+
+/* 
+ * Port J
+ */
+#define PJDIR_ADDR      0xfffff438              /* Port J direction reg */
+#define PJDATA_ADDR     0xfffff439              /* Port J data register */
+#define PJPUEN_ADDR     0xfffff43A              /* Port J Pull-Up enb. reg */
+#define PJSEL_ADDR      0xfffff43B              /* Port J Select Register */
+
+#define PJDIR           BYTE_REF(PJDIR_ADDR)
+#define PJDATA          BYTE_REF(PJDATA_ADDR)
+#define PJPUEN          BYTE_REF(PJPUEN_ADDR)
+#define PJSEL           BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)           (1 << (x))
+
+/*
+ * Port K
+ */
+#define PKDIR_ADDR      0xfffff440              /* Port K direction reg */
+#define PKDATA_ADDR     0xfffff441              /* Port K data register */
+#define PKPUEN_ADDR     0xfffff442              /* Port K Pull-Up enb. reg */
+#define PKSEL_ADDR      0xfffff443              /* Port K Select Register */
+
+#define PKDIR           BYTE_REF(PKDIR_ADDR)
+#define PKDATA          BYTE_REF(PKDATA_ADDR)
+#define PKPUEN          BYTE_REF(PKPUEN_ADDR)
+#define PKSEL           BYTE_REF(PKSEL_ADDR)
+
+#define PK(x)           (1 << (x))
+
+#define PK_DATAREADY            0x01    /* Use ~DATA_READY  as PK[0] */
+#define PK_PWM2         0x01    /* Use PWM2  as PK[0] */
+#define PK_R_W          0x02    /* Use R/W  as PK[1] */
+#define PK_LDS          0x04    /* Use /LDS  as PK[2] */
+#define PK_UDS          0x08    /* Use /UDS  as PK[3] */
+#define PK_LD4          0x10    /* Use LD4 as PK[4] */
+#define PK_LD5          0x20    /* Use LD5  as PK[5] */
+#define PK_LD6          0x40    /* Use LD6 as PK[6] */
+#define PK_LD7          0x80    /* Use LD7 as PK[7] */
+
+#define PJDIR_ADDR      0xfffff438              /* Port J direction reg */
+#define PJDATA_ADDR     0xfffff439              /* Port J data register */
+#define PJPUEN_ADDR     0xfffff43A              /* Port J Pull-Up enable reg */
+#define PJSEL_ADDR      0xfffff43B              /* Port J Select Register */
+
+#define PJDIR           BYTE_REF(PJDIR_ADDR)
+#define PJDATA          BYTE_REF(PJDATA_ADDR)
+#define PJPUEN          BYTE_REF(PJPUEN_ADDR)
+#define PJSEL           BYTE_REF(PJSEL_ADDR)
+
+#define PJ(x)           (1 << (x))
+
+#define PJ_MOSI         0x01    /* Use MOSI       as PJ[0] */
+#define PJ_MISO         0x02    /* Use MISO       as PJ[1] */
+#define PJ_SPICLK1      0x04    /* Use SPICLK1    as PJ[2] */
+#define PJ_SS           0x08    /* Use SS         as PJ[3] */
+#define PJ_RXD2         0x10    /* Use RXD2       as PJ[4] */
+#define PJ_TXD2         0x20    /* Use TXD2       as PJ[5] */
+#define PJ_RTS2         0x40    /* Use RTS2       as PJ[5] */
+#define PJ_CTS2         0x80    /* Use CTS2       as PJ[5] */
+
+/*
+ * Port M
+ */
+#define PMDIR_ADDR      0xfffff448              /* Port M direction reg */
+#define PMDATA_ADDR     0xfffff449              /* Port M data register */
+#define PMPUEN_ADDR     0xfffff44a              /* Port M Pull-Up enable reg */
+#define PMSEL_ADDR      0xfffff44b              /* Port M Select Register */
+
+#define PMDIR           BYTE_REF(PMDIR_ADDR)
+#define PMDATA          BYTE_REF(PMDATA_ADDR)
+#define PMPUEN          BYTE_REF(PMPUEN_ADDR)
+#define PMSEL           BYTE_REF(PMSEL_ADDR)
+
+#define PM(x)           (1 << (x))
+
+#define PM_SDCLK        0x01    /* Use SDCLK      as PM[0] */
+#define PM_SDCE         0x02    /* Use SDCE       as PM[1] */
+#define PM_DQMH         0x04    /* Use DQMH       as PM[2] */
+#define PM_DQML         0x08    /* Use DQML       as PM[3] */
+#define PM_SDA10        0x10    /* Use SDA10      as PM[4] */
+#define PM_DMOE         0x20    /* Use DMOE       as PM[5] */
+
+/**********
+ *
+ * 0xFFFFF5xx -- Pulse-Width Modulator (PWM)
+ *
+ **********/
+
+/*
+ * PWM Control Register
+ */
+#define PWMC_ADDR       0xfffff500
+#define PWMC            WORD_REF(PWMC_ADDR)
+
+#define PWMC_CLKSEL_MASK        0x0003  /* Clock Selection */
+#define PWMC_CLKSEL_SHIFT       0
+#define PWMC_REPEAT_MASK        0x000c  /* Sample Repeats */
+#define PWMC_REPEAT_SHIFT       2
+#define PWMC_EN                 0x0010  /* Enable PWM */
+#define PMNC_FIFOAV             0x0020  /* FIFO Available */
+#define PWMC_IRQEN              0x0040  /* Interrupt Request Enable */
+#define PWMC_IRQ                0x0080  /* Interrupt Request (FIFO empty) */
+#define PWMC_PRESCALER_MASK     0x7f00  /* Incoming Clock prescaler */
+#define PWMC_PRESCALER_SHIFT    8
+#define PWMC_CLKSRC             0x8000  /* Clock Source Select */
+
+/* '328-compatible definitions */
+#define PWMC_PWMEN      PWMC_EN
+
+/*
+ * PWM Sample Register 
+ */
+#define PWMS_ADDR       0xfffff502
+#define PWMS            WORD_REF(PWMS_ADDR)
+
+/*
+ * PWM Period Register
+ */
+#define PWMP_ADDR       0xfffff504
+#define PWMP            BYTE_REF(PWMP_ADDR)
+
+/*
+ * PWM Counter Register
+ */
+#define PWMCNT_ADDR     0xfffff505
+#define PWMCNT          BYTE_REF(PWMCNT_ADDR)
+
+/**********
+ *
+ * 0xFFFFF6xx -- General-Purpose Timer
+ *
+ **********/
+
+/* 
+ * Timer Control register
+ */
+#define TCTL_ADDR       0xfffff600
+#define TCTL            WORD_REF(TCTL_ADDR)
+
+#define TCTL_TEN                0x0001  /* Timer Enable  */
+#define TCTL_CLKSOURCE_MASK     0x000e  /* Clock Source: */
+#define   TCTL_CLKSOURCE_STOP      0x0000       /* Stop count (disabled)    */
+#define   TCTL_CLKSOURCE_SYSCLK    0x0002       /* SYSCLK to prescaler      */
+#define   TCTL_CLKSOURCE_SYSCLK_16 0x0004       /* SYSCLK/16 to prescaler   */
+#define   TCTL_CLKSOURCE_TIN       0x0006       /* TIN to prescaler         */
+#define   TCTL_CLKSOURCE_32KHZ     0x0008       /* 32kHz clock to prescaler */
+#define TCTL_IRQEN              0x0010  /* IRQ Enable    */
+#define TCTL_OM                 0x0020  /* Output Mode   */
+#define TCTL_CAP_MASK           0x00c0  /* Capture Edge: */
+#define   TCTL_CAP_RE           0x0040          /* Capture on rizing edge   */
+#define   TCTL_CAP_FE           0x0080          /* Capture on falling edge  */
+#define TCTL_FRR                0x0010  /* Free-Run Mode */
+
+/* '328-compatible definitions */
+#define TCTL1_ADDR      TCTL_ADDR
+#define TCTL1           TCTL
+
+/*
+ * Timer Prescaler Register
+ */
+#define TPRER_ADDR      0xfffff602
+#define TPRER           WORD_REF(TPRER_ADDR)
+
+/* '328-compatible definitions */
+#define TPRER1_ADDR     TPRER_ADDR
+#define TPRER1          TPRER
+
+/*
+ * Timer Compare Register
+ */
+#define TCMP_ADDR       0xfffff604
+#define TCMP            WORD_REF(TCMP_ADDR)
+
+/* '328-compatible definitions */
+#define TCMP1_ADDR      TCMP_ADDR
+#define TCMP1           TCMP
+
+/*
+ * Timer Capture register
+ */
+#define TCR_ADDR        0xfffff606
+#define TCR             WORD_REF(TCR_ADDR)
+
+/* '328-compatible definitions */
+#define TCR1_ADDR       TCR_ADDR
+#define TCR1            TCR
+
+/*
+ * Timer Counter Register
+ */
+#define TCN_ADDR        0xfffff608
+#define TCN             WORD_REF(TCN_ADDR)
+
+/* '328-compatible definitions */
+#define TCN1_ADDR       TCN_ADDR
+#define TCN1            TCN
+
+/*
+ * Timer Status Register
+ */
+#define TSTAT_ADDR      0xfffff60a
+#define TSTAT           WORD_REF(TSTAT_ADDR)
+
+#define TSTAT_COMP      0x0001          /* Compare Event occurred */
+#define TSTAT_CAPT      0x0001          /* Capture Event occurred */
+
+/* '328-compatible definitions */
+#define TSTAT1_ADDR     TSTAT_ADDR
+#define TSTAT1          TSTAT
+
+/**********
+ *
+ * 0xFFFFF8xx -- Serial Periferial Interface Master (SPIM)
+ *
+ **********/
+
+/*
+ * SPIM Data Register
+ */
+#define SPIMDATA_ADDR   0xfffff800
+#define SPIMDATA        WORD_REF(SPIMDATA_ADDR)
+
+/*
+ * SPIM Control/Status Register
+ */
+#define SPIMCONT_ADDR   0xfffff802
+#define SPIMCONT        WORD_REF(SPIMCONT_ADDR)
+
+#define SPIMCONT_BIT_COUNT_MASK  0x000f /* Transfer Length in Bytes */
+#define SPIMCONT_BIT_COUNT_SHIFT 0
+#define SPIMCONT_POL             0x0010 /* SPMCLK Signel Polarity */
+#define SPIMCONT_PHA             0x0020 /* Clock/Data phase relationship */
+#define SPIMCONT_IRQEN           0x0040 /* IRQ Enable */
+#define SPIMCONT_IRQ             0x0080 /* Interrupt Request */
+#define SPIMCONT_XCH             0x0100 /* Exchange */
+#define SPIMCONT_ENABLE          0x0200 /* Enable SPIM */
+#define SPIMCONT_DATA_RATE_MASK  0xe000 /* SPIM Data Rate */
+#define SPIMCONT_DATA_RATE_SHIFT 13
+
+/* '328-compatible definitions */
+#define SPIMCONT_SPIMIRQ        SPIMCONT_IRQ
+#define SPIMCONT_SPIMEN         SPIMCONT_ENABLE
+
+/**********
+ *
+ * 0xFFFFF9xx -- UART
+ *
+ **********/
+
+/*
+ * UART Status/Control Register
+ */
+
+#define USTCNT_ADDR     0xfffff900
+#define USTCNT          WORD_REF(USTCNT_ADDR)
+
+#define USTCNT_TXAE     0x0001  /* Transmitter Available Interrupt Enable */
+#define USTCNT_TXHE     0x0002  /* Transmitter Half Empty Enable */
+#define USTCNT_TXEE     0x0004  /* Transmitter Empty Interrupt Enable */
+#define USTCNT_RXRE     0x0008  /* Receiver Ready Interrupt Enable */
+#define USTCNT_RXHE     0x0010  /* Receiver Half-Full Interrupt Enable */
+#define USTCNT_RXFE     0x0020  /* Receiver Full Interrupt Enable */
+#define USTCNT_CTSD     0x0040  /* CTS Delta Interrupt Enable */
+#define USTCNT_ODEN     0x0080  /* Old Data Interrupt Enable */
+#define USTCNT_8_7      0x0100  /* Eight or seven-bit transmission */
+#define USTCNT_STOP     0x0200  /* Stop bit transmission */
+#define USTCNT_ODD      0x0400  /* Odd Parity */
+#define USTCNT_PEN      0x0800  /* Parity Enable */
+#define USTCNT_CLKM     0x1000  /* Clock Mode Select */
+#define USTCNT_TXEN     0x2000  /* Transmitter Enable */
+#define USTCNT_RXEN     0x4000  /* Receiver Enable */
+#define USTCNT_UEN      0x8000  /* UART Enable */
+
+/* '328-compatible definitions */
+#define USTCNT_TXAVAILEN        USTCNT_TXAE
+#define USTCNT_TXHALFEN         USTCNT_TXHE
+#define USTCNT_TXEMPTYEN        USTCNT_TXEE
+#define USTCNT_RXREADYEN        USTCNT_RXRE
+#define USTCNT_RXHALFEN         USTCNT_RXHE
+#define USTCNT_RXFULLEN         USTCNT_RXFE
+#define USTCNT_CTSDELTAEN       USTCNT_CTSD
+#define USTCNT_ODD_EVEN         USTCNT_ODD
+#define USTCNT_PARITYEN         USTCNT_PEN
+#define USTCNT_CLKMODE          USTCNT_CLKM
+#define USTCNT_UARTEN           USTCNT_UEN
+
+/*
+ * UART Baud Control Register
+ */
+#define UBAUD_ADDR      0xfffff902
+#define UBAUD           WORD_REF(UBAUD_ADDR)
+
+#define UBAUD_PRESCALER_MASK    0x003f  /* Actual divisor is 65 - PRESCALER */
+#define UBAUD_PRESCALER_SHIFT   0
+#define UBAUD_DIVIDE_MASK       0x0700  /* Baud Rate freq. divizor */
+#define UBAUD_DIVIDE_SHIFT      8
+#define UBAUD_BAUD_SRC          0x0800  /* Baud Rate Source */
+#define UBAUD_UCLKDIR           0x2000  /* UCLK Direction */
+
+/*
+ * UART Receiver Register 
+ */
+#define URX_ADDR        0xfffff904
+#define URX             WORD_REF(URX_ADDR)
+
+#define URX_RXDATA_ADDR 0xfffff905
+#define URX_RXDATA      BYTE_REF(URX_RXDATA_ADDR)
+
+#define URX_RXDATA_MASK  0x00ff /* Received data */
+#define URX_RXDATA_SHIFT 0
+#define URX_PARITY_ERROR 0x0100 /* Parity Error */
+#define URX_BREAK        0x0200 /* Break Detected */
+#define URX_FRAME_ERROR  0x0400 /* Framing Error */
+#define URX_OVRUN        0x0800 /* Serial Overrun */
+#define URX_OLD_DATA     0x1000 /* Old data in FIFO */
+#define URX_DATA_READY   0x2000 /* Data Ready (FIFO not empty) */
+#define URX_FIFO_HALF    0x4000 /* FIFO is Half-Full */
+#define URX_FIFO_FULL    0x8000 /* FIFO is Full */
+
+/*
+ * UART Transmitter Register 
+ */
+#define UTX_ADDR        0xfffff906
+#define UTX             WORD_REF(UTX_ADDR)
+
+#define UTX_TXDATA_ADDR 0xfffff907
+#define UTX_TXDATA      BYTE_REF(UTX_TXDATA_ADDR)
+
+#define UTX_TXDATA_MASK  0x00ff /* Data to be transmitted */
+#define UTX_TXDATA_SHIFT 0
+#define UTX_CTS_DELTA    0x0100 /* CTS changed */
+#define UTX_CTS_STAT     0x0200 /* CTS State */
+#define UTX_BUSY         0x0400 /* FIFO is busy, sending a character */
+#define UTX_NOCTS        0x0800 /* Ignore CTS */
+#define UTX_SEND_BREAK   0x1000 /* Send a BREAK */
+#define UTX_TX_AVAIL     0x2000 /* Transmit FIFO has a slot available */
+#define UTX_FIFO_HALF    0x4000 /* Transmit FIFO is half empty */
+#define UTX_FIFO_EMPTY   0x8000 /* Transmit FIFO is empty */
+
+/* '328-compatible definitions */
+#define UTX_CTS_STATUS  UTX_CTS_STAT
+#define UTX_IGNORE_CTS  UTX_NOCTS
+
+/*
+ * UART Miscellaneous Register 
+ */
+#define UMISC_ADDR      0xfffff908
+#define UMISC           WORD_REF(UMISC_ADDR)
+
+#define UMISC_TX_POL     0x0004 /* Transmit Polarity */
+#define UMISC_RX_POL     0x0008 /* Receive Polarity */
+#define UMISC_IRDA_LOOP  0x0010 /* IrDA Loopback Enable */
+#define UMISC_IRDA_EN    0x0020 /* Infra-Red Enable */
+#define UMISC_RTS        0x0040 /* Set RTS status */
+#define UMISC_RTSCONT    0x0080 /* Choose RTS control */
+#define UMISC_IR_TEST    0x0400 /* IRDA Test Enable */
+#define UMISC_BAUD_RESET 0x0800 /* Reset Baud Rate Generation Counters */
+#define UMISC_LOOP       0x1000 /* Serial Loopback Enable */
+#define UMISC_FORCE_PERR 0x2000 /* Force Parity Error */
+#define UMISC_CLKSRC     0x4000 /* Clock Source */
+#define UMISC_BAUD_TEST  0x8000 /* Enable Baud Test Mode */
+
+/* 
+ * UART Non-integer Prescaler Register
+ */
+#define NIPR_ADDR       0xfffff90a
+#define NIPR            WORD_REF(NIPR_ADDR)
+
+#define NIPR_STEP_VALUE_MASK    0x00ff  /* NI prescaler step value */
+#define NIPR_STEP_VALUE_SHIFT   0
+#define NIPR_SELECT_MASK        0x0700  /* Tap Selection */
+#define NIPR_SELECT_SHIFT       8
+#define NIPR_PRE_SEL            0x8000  /* Non-integer prescaler select */
+
+
+/* generalization of uart control registers to support multiple ports: */
+typedef struct {
+  volatile unsigned short int ustcnt;
+  volatile unsigned short int ubaud;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char rxdata;
+    } b;
+  } urx;
+  union {
+    volatile unsigned short int w;
+    struct {
+      volatile unsigned char status;
+      volatile unsigned char txdata;
+    } b;
+  } utx;
+  volatile unsigned short int umisc;
+  volatile unsigned short int nipr;
+  volatile unsigned short int hmark;
+  volatile unsigned short int unused;
+} __attribute__((packed)) m68328_uart;
+
+
+
+
+/**********
+ *
+ * 0xFFFFFAxx -- LCD Controller
+ *
+ **********/
+
+/*
+ * LCD Screen Starting Address Register 
+ */
+#define LSSA_ADDR       0xfffffa00
+#define LSSA            LONG_REF(LSSA_ADDR)
+
+#define LSSA_SSA_MASK   0x1ffffffe      /* Bits 0 and 29-31 are reserved */
+
+/*
+ * LCD Virtual Page Width Register 
+ */
+#define LVPW_ADDR       0xfffffa05
+#define LVPW            BYTE_REF(LVPW_ADDR)
+
+/*
+ * LCD Screen Width Register (not compatible with '328 !!!) 
+ */
+#define LXMAX_ADDR      0xfffffa08
+#define LXMAX           WORD_REF(LXMAX_ADDR)
+
+#define LXMAX_XM_MASK   0x02f0          /* Bits 0-3 and 10-15 are reserved */
+
+/*
+ * LCD Screen Height Register
+ */
+#define LYMAX_ADDR      0xfffffa0a
+#define LYMAX           WORD_REF(LYMAX_ADDR)
+
+#define LYMAX_YM_MASK   0x01ff          /* Bits 9-15 are reserved */
+
+/*
+ * LCD Cursor X Position Register
+ */
+#define LCXP_ADDR       0xfffffa18
+#define LCXP            WORD_REF(LCXP_ADDR)
+
+#define LCXP_CC_MASK    0xc000          /* Cursor Control */
+#define   LCXP_CC_TRAMSPARENT   0x0000
+#define   LCXP_CC_BLACK         0x4000
+#define   LCXP_CC_REVERSED      0x8000
+#define   LCXP_CC_WHITE         0xc000
+#define LCXP_CXP_MASK   0x02ff          /* Cursor X position */
+
+/*
+ * LCD Cursor Y Position Register
+ */
+#define LCYP_ADDR       0xfffffa1a
+#define LCYP            WORD_REF(LCYP_ADDR)
+
+#define LCYP_CYP_MASK   0x01ff          /* Cursor Y Position */
+
+/*
+ * LCD Cursor Width and Heigth Register
+ */
+#define LCWCH_ADDR      0xfffffa1c
+#define LCWCH           WORD_REF(LCWCH_ADDR)
+
+#define LCWCH_CH_MASK   0x001f          /* Cursor Height */
+#define LCWCH_CH_SHIFT  0
+#define LCWCH_CW_MASK   0x1f00          /* Cursor Width */
+#define LCWCH_CW_SHIFT  8
+
+/*
+ * LCD Blink Control Register
+ */
+#define LBLKC_ADDR      0xfffffa1f
+#define LBLKC           BYTE_REF(LBLKC_ADDR)
+
+#define LBLKC_BD_MASK   0x7f    /* Blink Divisor */
+#define LBLKC_BD_SHIFT  0
+#define LBLKC_BKEN      0x80    /* Blink Enabled */
+
+/*
+ * LCD Panel Interface Configuration Register 
+ */
+#define LPICF_ADDR      0xfffffa20
+#define LPICF           BYTE_REF(LPICF_ADDR)
+
+#define LPICF_GS_MASK    0x03    /* Gray-Scale Mode */
+#define   LPICF_GS_BW      0x00
+#define   LPICF_GS_GRAY_4  0x01
+#define   LPICF_GS_GRAY_16 0x02
+#define LPICF_PBSIZ_MASK 0x0c   /* Panel Bus Width */
+#define   LPICF_PBSIZ_1    0x00
+#define   LPICF_PBSIZ_2    0x04
+#define   LPICF_PBSIZ_4    0x08
+
+/*
+ * LCD Polarity Configuration Register 
+ */
+#define LPOLCF_ADDR     0xfffffa21
+#define LPOLCF          BYTE_REF(LPOLCF_ADDR)
+
+#define LPOLCF_PIXPOL   0x01    /* Pixel Polarity */
+#define LPOLCF_LPPOL    0x02    /* Line Pulse Polarity */
+#define LPOLCF_FLMPOL   0x04    /* Frame Marker Polarity */
+#define LPOLCF_LCKPOL   0x08    /* LCD Shift Lock Polarity */
+
+/*
+ * LACD (LCD Alternate Crystal Direction) Rate Control Register
+ */
+#define LACDRC_ADDR     0xfffffa23
+#define LACDRC          BYTE_REF(LACDRC_ADDR)
+
+#define LACDRC_ACDSLT    0x80   /* Signal Source Select */
+#define LACDRC_ACD_MASK  0x0f   /* Alternate Crystal Direction Control */
+#define LACDRC_ACD_SHIFT 0
+
+/*
+ * LCD Pixel Clock Divider Register
+ */
+#define LPXCD_ADDR      0xfffffa25
+#define LPXCD           BYTE_REF(LPXCD_ADDR)
+
+#define LPXCD_PCD_MASK  0x3f    /* Pixel Clock Divider */
+#define LPXCD_PCD_SHIFT 0
+
+/*
+ * LCD Clocking Control Register
+ */
+#define LCKCON_ADDR     0xfffffa27
+#define LCKCON          BYTE_REF(LCKCON_ADDR)
+
+#define LCKCON_DWS_MASK  0x0f   /* Display Wait-State */
+#define LCKCON_DWS_SHIFT 0
+#define LCKCON_DWIDTH    0x40   /* Display Memory Width  */
+#define LCKCON_LCDON     0x80   /* Enable LCD Controller */
+
+/* '328-compatible definitions */
+#define LCKCON_DW_MASK  LCKCON_DWS_MASK
+#define LCKCON_DW_SHIFT LCKCON_DWS_SHIFT
+ 
+/*
+ * LCD Refresh Rate Adjustment Register 
+ */
+#define LRRA_ADDR       0xfffffa29
+#define LRRA            BYTE_REF(LRRA_ADDR)
+
+/*
+ * LCD Panning Offset Register
+ */
+#define LPOSR_ADDR      0xfffffa2d
+#define LPOSR           BYTE_REF(LPOSR_ADDR)
+
+#define LPOSR_POS_MASK  0x0f    /* Pixel Offset Code */
+#define LPOSR_POS_SHIFT 0
+
+/*
+ * LCD Frame Rate Control Modulation Register
+ */
+#define LFRCM_ADDR      0xfffffa31
+#define LFRCM           BYTE_REF(LFRCM_ADDR)
+
+#define LFRCM_YMOD_MASK  0x0f   /* Vertical Modulation */
+#define LFRCM_YMOD_SHIFT 0
+#define LFRCM_XMOD_MASK  0xf0   /* Horizontal Modulation */
+#define LFRCM_XMOD_SHIFT 4
+
+/*
+ * LCD Gray Palette Mapping Register
+ */
+#define LGPMR_ADDR      0xfffffa33
+#define LGPMR           BYTE_REF(LGPMR_ADDR)
+
+#define LGPMR_G1_MASK   0x0f
+#define LGPMR_G1_SHIFT  0
+#define LGPMR_G2_MASK   0xf0
+#define LGPMR_G2_SHIFT  4
+
+/* 
+ * PWM Contrast Control Register
+ */
+#define PWMR_ADDR       0xfffffa36
+#define PWMR            WORD_REF(PWMR_ADDR)
+
+#define PWMR_PW_MASK    0x00ff  /* Pulse Width */
+#define PWMR_PW_SHIFT   0
+#define PWMR_CCPEN      0x0100  /* Contrast Control Enable */
+#define PWMR_SRC_MASK   0x0600  /* Input Clock Source */
+#define   PWMR_SRC_LINE   0x0000        /* Line Pulse  */
+#define   PWMR_SRC_PIXEL  0x0200        /* Pixel Clock */
+#define   PWMR_SRC_LCD    0x4000        /* LCD clock   */
+
+/**********
+ *
+ * 0xFFFFFBxx -- Real-Time Clock (RTC)
+ *
+ **********/
+
+/*
+ * RTC Hours Minutes and Seconds Register
+ */
+#define RTCTIME_ADDR    0xfffffb00
+#define RTCTIME         LONG_REF(RTCTIME_ADDR)
+
+#define RTCTIME_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCTIME_SECONDS_SHIFT   0
+#define RTCTIME_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCTIME_MINUTES_SHIFT   16
+#define RTCTIME_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCTIME_HOURS_SHIFT     24
+
+/*
+ *  RTC Alarm Register 
+ */
+#define RTCALRM_ADDR    0xfffffb04
+#define RTCALRM         LONG_REF(RTCALRM_ADDR)
+
+#define RTCALRM_SECONDS_MASK    0x0000003f      /* Seconds */
+#define RTCALRM_SECONDS_SHIFT   0
+#define RTCALRM_MINUTES_MASK    0x003f0000      /* Minutes */
+#define RTCALRM_MINUTES_SHIFT   16
+#define RTCALRM_HOURS_MASK      0x1f000000      /* Hours */
+#define RTCALRM_HOURS_SHIFT     24
+
+/*
+ * Watchdog Timer Register 
+ */
+#define WATCHDOG_ADDR   0xfffffb0a
+#define WATCHDOG        WORD_REF(WATCHDOG_ADDR)
+
+#define WATCHDOG_EN     0x0001  /* Watchdog Enabled */
+#define WATCHDOG_ISEL   0x0002  /* Select the watchdog interrupt */
+#define WATCHDOG_INTF   0x0080  /* Watchdog interrupt occcured */
+#define WATCHDOG_CNT_MASK  0x0300       /* Watchdog Counter */
+#define WATCHDOG_CNT_SHIFT 8
+
+/*
+ * RTC Control Register
+ */
+#define RTCCTL_ADDR     0xfffffb0c
+#define RTCCTL          WORD_REF(RTCCTL_ADDR)
+
+#define RTCCTL_XTL      0x0020  /* Crystal Selection */
+#define RTCCTL_EN       0x0080  /* RTC Enable */
+
+/* '328-compatible definitions */
+#define RTCCTL_384      RTCCTL_XTL
+#define RTCCTL_ENABLE   RTCCTL_EN
+
+/*
+ * RTC Interrupt Status Register 
+ */
+#define RTCISR_ADDR     0xfffffb0e
+#define RTCISR          WORD_REF(RTCISR_ADDR)
+
+#define RTCISR_SW       0x0001  /* Stopwatch timed out */
+#define RTCISR_MIN      0x0002  /* 1-minute interrupt has occurred */
+#define RTCISR_ALM      0x0004  /* Alarm interrupt has occurred */
+#define RTCISR_DAY      0x0008  /* 24-hour rollover interrupt has occurred */
+#define RTCISR_1HZ      0x0010  /* 1Hz interrupt has occurred */
+#define RTCISR_HR       0x0020  /* 1-hour interrupt has occurred */
+#define RTCISR_SAM0     0x0100  /*   4Hz /   4.6875Hz interrupt has occurred */ 
+#define RTCISR_SAM1     0x0200  /*   8Hz /   9.3750Hz interrupt has occurred */ 
+#define RTCISR_SAM2     0x0400  /*  16Hz /  18.7500Hz interrupt has occurred */ 
+#define RTCISR_SAM3     0x0800  /*  32Hz /  37.5000Hz interrupt has occurred */ 
+#define RTCISR_SAM4     0x1000  /*  64Hz /  75.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM5     0x2000  /* 128Hz / 150.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM6     0x4000  /* 256Hz / 300.0000Hz interrupt has occurred */ 
+#define RTCISR_SAM7     0x8000  /* 512Hz / 600.0000Hz interrupt has occurred */ 
+
+/*
+ * RTC Interrupt Enable Register
+ */
+#define RTCIENR_ADDR    0xfffffb10
+#define RTCIENR         WORD_REF(RTCIENR_ADDR)
+
+#define RTCIENR_SW      0x0001  /* Stopwatch interrupt enable */
+#define RTCIENR_MIN     0x0002  /* 1-minute interrupt enable */
+#define RTCIENR_ALM     0x0004  /* Alarm interrupt enable */
+#define RTCIENR_DAY     0x0008  /* 24-hour rollover interrupt enable */
+#define RTCIENR_1HZ     0x0010  /* 1Hz interrupt enable */
+#define RTCIENR_HR      0x0020  /* 1-hour interrupt enable */
+#define RTCIENR_SAM0    0x0100  /*   4Hz /   4.6875Hz interrupt enable */ 
+#define RTCIENR_SAM1    0x0200  /*   8Hz /   9.3750Hz interrupt enable */ 
+#define RTCIENR_SAM2    0x0400  /*  16Hz /  18.7500Hz interrupt enable */ 
+#define RTCIENR_SAM3    0x0800  /*  32Hz /  37.5000Hz interrupt enable */ 
+#define RTCIENR_SAM4    0x1000  /*  64Hz /  75.0000Hz interrupt enable */ 
+#define RTCIENR_SAM5    0x2000  /* 128Hz / 150.0000Hz interrupt enable */ 
+#define RTCIENR_SAM6    0x4000  /* 256Hz / 300.0000Hz interrupt enable */ 
+#define RTCIENR_SAM7    0x8000  /* 512Hz / 600.0000Hz interrupt enable */ 
+
+/* 
+ * Stopwatch Minutes Register
+ */
+#define STPWCH_ADDR     0xfffffb12
+#define STPWCH          WORD_REF(STPWCH_ADDR)
+
+#define STPWCH_CNT_MASK  0x003f /* Stopwatch countdown value */
+#define SPTWCH_CNT_SHIFT 0
+
+/*
+ * RTC Day Count Register 
+ */
+#define DAYR_ADDR       0xfffffb1a
+#define DAYR            WORD_REF(DAYR_ADDR)
+
+#define DAYR_DAYS_MASK  0x1ff   /* Day Setting */
+#define DAYR_DAYS_SHIFT 0
+
+/*
+ * RTC Day Alarm Register 
+ */
+#define DAYALARM_ADDR   0xfffffb1c
+#define DAYALARM        WORD_REF(DAYALARM_ADDR)
+
+#define DAYALARM_DAYSAL_MASK    0x01ff  /* Day Setting of the Alarm */
+#define DAYALARM_DAYSAL_SHIFT   0
+
+/**********
+ *
+ * 0xFFFFFCxx -- DRAM Controller
+ *
+ **********/
+
+/*
+ * DRAM Memory Configuration Register 
+ */
+#define DRAMMC_ADDR     0xfffffc00
+#define DRAMMC          WORD_REF(DRAMMC_ADDR)
+
+#define DRAMMC_ROW12_MASK       0xc000  /* Row address bit for MD12 */
+#define   DRAMMC_ROW12_PA10     0x0000
+#define   DRAMMC_ROW12_PA21     0x4000  
+#define   DRAMMC_ROW12_PA23     0x8000
+#define DRAMMC_ROW0_MASK        0x3000  /* Row address bit for MD0 */
+#define   DRAMMC_ROW0_PA11      0x0000
+#define   DRAMMC_ROW0_PA22      0x1000
+#define   DRAMMC_ROW0_PA23      0x2000
+#define DRAMMC_ROW11            0x0800  /* Row address bit for MD11 PA20/PA22 */
+#define DRAMMC_ROW10            0x0400  /* Row address bit for MD10 PA19/PA21 */
+#define DRAMMC_ROW9             0x0200  /* Row address bit for MD9  PA9/PA19  */
+#define DRAMMC_ROW8             0x0100  /* Row address bit for MD8  PA10/PA20 */
+#define DRAMMC_COL10            0x0080  /* Col address bit for MD10 PA11/PA0  */
+#define DRAMMC_COL9             0x0040  /* Col address bit for MD9  PA10/PA0  */
+#define DRAMMC_COL8             0x0020  /* Col address bit for MD8  PA9/PA0   */
+#define DRAMMC_REF_MASK         0x001f  /* Reresh Cycle */
+#define DRAMMC_REF_SHIFT        0
+
+/*
+ * DRAM Control Register
+ */
+#define DRAMC_ADDR      0xfffffc02
+#define DRAMC           WORD_REF(DRAMC_ADDR)
+
+#define DRAMC_DWE          0x0001       /* DRAM Write Enable */
+#define DRAMC_RST          0x0002       /* Reset Burst Refresh Enable */
+#define DRAMC_LPR          0x0004       /* Low-Power Refresh Enable */
+#define DRAMC_SLW          0x0008       /* Slow RAM */
+#define DRAMC_LSP          0x0010       /* Light Sleep */
+#define DRAMC_MSW          0x0020       /* Slow Multiplexing */
+#define DRAMC_WS_MASK      0x00c0       /* Wait-states */
+#define DRAMC_WS_SHIFT     6
+#define DRAMC_PGSZ_MASK    0x0300       /* Page Size for fast page mode */
+#define DRAMC_PGSZ_SHIFT   8
+#define   DRAMC_PGSZ_256K  0x0000       
+#define   DRAMC_PGSZ_512K  0x0100
+#define   DRAMC_PGSZ_1024K 0x0200
+#define   DRAMC_PGSZ_2048K 0x0300
+#define DRAMC_EDO          0x0400       /* EDO DRAM */
+#define DRAMC_CLK          0x0800       /* Refresh Timer Clock source select */
+#define DRAMC_BC_MASK      0x3000       /* Page Access Clock Cycle (FP mode) */
+#define DRAMC_BC_SHIFT     12
+#define DRAMC_RM           0x4000       /* Refresh Mode */
+#define DRAMC_EN           0x8000       /* DRAM Controller enable */
+
+
+/**********
+ *
+ * 0xFFFFFDxx -- In-Circuit Emulation (ICE)
+ *
+ **********/
+
+/*
+ * ICE Module Address Compare Register
+ */
+#define ICEMACR_ADDR    0xfffffd00
+#define ICEMACR         LONG_REF(ICEMACR_ADDR)
+
+/*
+ * ICE Module Address Mask Register
+ */
+#define ICEMAMR_ADDR    0xfffffd04
+#define ICEMAMR         LONG_REF(ICEMAMR_ADDR)
+
+/*
+ * ICE Module Control Compare Register
+ */
+#define ICEMCCR_ADDR    0xfffffd08
+#define ICEMCCR         WORD_REF(ICEMCCR_ADDR)
+
+#define ICEMCCR_PD      0x0001  /* Program/Data Cycle Selection */
+#define ICEMCCR_RW      0x0002  /* Read/Write Cycle Selection */
+
+/*
+ * ICE Module Control Mask Register
+ */
+#define ICEMCMR_ADDR    0xfffffd0a
+#define ICEMCMR         WORD_REF(ICEMCMR_ADDR)
+
+#define ICEMCMR_PDM     0x0001  /* Program/Data Cycle Mask */
+#define ICEMCMR_RWM     0x0002  /* Read/Write Cycle Mask */
+
+/*
+ * ICE Module Control Register 
+ */
+#define ICEMCR_ADDR     0xfffffd0c
+#define ICEMCR          WORD_REF(ICEMCR_ADDR)
+
+#define ICEMCR_CEN      0x0001  /* Compare Enable */
+#define ICEMCR_PBEN     0x0002  /* Program Break Enable */
+#define ICEMCR_SB       0x0004  /* Single Breakpoint */
+#define ICEMCR_HMDIS    0x0008  /* HardMap disable */
+#define ICEMCR_BBIEN    0x0010  /* Bus Break Interrupt Enable */
+
+/*
+ * ICE Module Status Register 
+ */
+#define ICEMSR_ADDR     0xfffffd0e
+#define ICEMSR          WORD_REF(ICEMSR_ADDR)
+
+#define ICEMSR_EMUEN    0x0001  /* Emulation Enable */
+#define ICEMSR_BRKIRQ   0x0002  /* A-Line Vector Fetch Detected */
+#define ICEMSR_BBIRQ    0x0004  /* Bus Break Interrupt Detected */
+#define ICEMSR_EMIRQ    0x0008  /* EMUIRQ Falling Edge Detected */
+
+#endif /* _MC68VZ328_H_ */
diff --git a/arch/m68k/include/asm/a.out-core.h b/arch/m68k/include/asm/a.out-core.h
new file mode 100644
index 000000000000..f6bfc1d63ff6
--- /dev/null
+++ b/arch/m68k/include/asm/a.out-core.h
@@ -0,0 +1,67 @@
+/* a.out coredump register dumper
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_A_OUT_CORE_H
+#define _ASM_A_OUT_CORE_H
+
+#ifdef __KERNEL__
+
+#include <linux/user.h>
+#include <linux/elfcore.h>
+
+/*
+ * fill in the user structure for an a.out core dump
+ */
+static inline void aout_dump_thread(struct pt_regs *regs, struct user *dump)
+{
+        struct switch_stack *sw;
+
+/* changed the size calculations - should hopefully work better. lbt */
+        dump->magic = CMAGIC;
+        dump->start_code = 0;
+        dump->start_stack = rdusp() & ~(PAGE_SIZE - 1);
+        dump->u_tsize = ((unsigned long) current->mm->end_code) >> PAGE_SHIFT;
+        dump->u_dsize = ((unsigned long) (current->mm->brk +
+                                          (PAGE_SIZE-1))) >> PAGE_SHIFT;
+        dump->u_dsize -= dump->u_tsize;
+        dump->u_ssize = 0;
+
+        if (dump->start_stack < TASK_SIZE)
+                dump->u_ssize = ((unsigned long) (TASK_SIZE - dump->start_stack)) >> PAGE_SHIFT;
+
+        dump->u_ar0 = offsetof(struct user, regs);
+        sw = ((struct switch_stack *)regs) - 1;
+        dump->regs.d1 = regs->d1;
+        dump->regs.d2 = regs->d2;
+        dump->regs.d3 = regs->d3;
+        dump->regs.d4 = regs->d4;
+        dump->regs.d5 = regs->d5;
+        dump->regs.d6 = sw->d6;
+        dump->regs.d7 = sw->d7;
+        dump->regs.a0 = regs->a0;
+        dump->regs.a1 = regs->a1;
+        dump->regs.a2 = regs->a2;
+        dump->regs.a3 = sw->a3;
+        dump->regs.a4 = sw->a4;
+        dump->regs.a5 = sw->a5;
+        dump->regs.a6 = sw->a6;
+        dump->regs.d0 = regs->d0;
+        dump->regs.orig_d0 = regs->orig_d0;
+        dump->regs.stkadj = regs->stkadj;
+        dump->regs.sr = regs->sr;
+        dump->regs.pc = regs->pc;
+        dump->regs.fmtvec = (regs->format << 12) | regs->vector;
+        /* dump floating point stuff */
+        dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp);
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_A_OUT_CORE_H */
diff --git a/arch/m68k/include/asm/a.out.h b/arch/m68k/include/asm/a.out.h
new file mode 100644
index 000000000000..3885fe43432a
--- /dev/null
+++ b/arch/m68k/include/asm/a.out.h
@@ -0,0 +1,20 @@
+#ifndef __M68K_A_OUT_H__
+#define __M68K_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;         /* Use macros N_MAGIC, etc for access */
+  unsigned a_text;              /* length of text, in bytes */
+  unsigned a_data;              /* length of data, in bytes */
+  unsigned a_bss;               /* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;              /* length of symbol table data in file, in bytes */
+  unsigned a_entry;             /* start address */
+  unsigned a_trsize;            /* length of relocation info for text, in bytes */
+  unsigned a_drsize;            /* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)     ((a).a_trsize)
+#define N_DRSIZE(a)     ((a).a_drsize)
+#define N_SYMSIZE(a)    ((a).a_syms)
+
+#endif /* __M68K_A_OUT_H__ */
diff --git a/arch/m68k/include/asm/adb_iop.h b/arch/m68k/include/asm/adb_iop.h
new file mode 100644
index 000000000000..8a48e56f2d62
--- /dev/null
+++ b/arch/m68k/include/asm/adb_iop.h
@@ -0,0 +1,44 @@
+/*
+ * ADB through the IOP
+ * Written by Joshua M. Thompson
+ */
+
+/* IOP number and channel number for ADB */
+
+#define ADB_IOP         IOP_NUM_ISM
+#define ADB_CHAN        2
+
+/* From the A/UX headers...maybe important, maybe not */
+
+#define ADB_IOP_LISTEN  0x01
+#define ADB_IOP_TALK    0x02
+#define ADB_IOP_EXISTS  0x04
+#define ADB_IOP_FLUSH   0x08
+#define ADB_IOP_RESET   0x10
+#define ADB_IOP_INT     0x20
+#define ADB_IOP_POLL    0x40
+#define ADB_IOP_UNINT   0x80
+
+#define AIF_RESET       0x00
+#define AIF_FLUSH       0x01
+#define AIF_LISTEN      0x08
+#define AIF_TALK        0x0C
+
+/* Flag bits in struct adb_iopmsg */
+
+#define ADB_IOP_EXPLICIT        0x80    /* nonzero if explicit command */
+#define ADB_IOP_AUTOPOLL        0x40    /* auto/SRQ polling enabled    */
+#define ADB_IOP_SRQ             0x04    /* SRQ detected                */
+#define ADB_IOP_TIMEOUT         0x02    /* nonzero if timeout          */
+
+#ifndef __ASSEMBLY__
+
+struct adb_iopmsg {
+        __u8 flags;             /* ADB flags         */
+        __u8 count;             /* no. of data bytes */
+        __u8 cmd;               /* ADB command       */
+        __u8 data[8];           /* ADB data          */
+        __u8 spare[21];         /* spare             */
+};
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/amigahw.h b/arch/m68k/include/asm/amigahw.h
new file mode 100644
index 000000000000..5ca5dd951a4a
--- /dev/null
+++ b/arch/m68k/include/asm/amigahw.h
@@ -0,0 +1,350 @@
+/*
+** asm-m68k/amigahw.h -- This header defines some macros and pointers for
+**                    the various Amiga custom hardware registers.
+**                    The naming conventions used here conform to those
+**                    used in the Amiga Hardware Reference Manual, 3rd Edition
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 9/24/92 by Greg Harp
+*/
+
+#ifndef _M68K_AMIGAHW_H
+#define _M68K_AMIGAHW_H
+
+#include <linux/ioport.h>
+
+    /*
+     *  Different Amiga models
+     */
+
+#define AMI_UNKNOWN     (0)
+#define AMI_500         (1)
+#define AMI_500PLUS     (2)
+#define AMI_600         (3)
+#define AMI_1000        (4)
+#define AMI_1200        (5)
+#define AMI_2000        (6)
+#define AMI_2500        (7)
+#define AMI_3000        (8)
+#define AMI_3000T       (9)
+#define AMI_3000PLUS    (10)
+#define AMI_4000        (11)
+#define AMI_4000T       (12)
+#define AMI_CDTV        (13)
+#define AMI_CD32        (14)
+#define AMI_DRACO       (15)
+
+
+    /*
+     *  Chipsets
+     */
+
+extern unsigned long amiga_chipset;
+
+#define CS_STONEAGE     (0)
+#define CS_OCS          (1)
+#define CS_ECS          (2)
+#define CS_AGA          (3)
+
+
+    /*
+     *  Miscellaneous
+     */
+
+extern unsigned long amiga_eclock;      /* 700 kHz E Peripheral Clock */
+extern unsigned long amiga_colorclock;  /* 3.5 MHz Color Clock */
+extern unsigned long amiga_chip_size;   /* Chip RAM Size (bytes) */
+extern unsigned char amiga_vblank;      /* VBLANK Frequency */
+
+
+#define AMIGAHW_DECLARE(name)   unsigned name : 1
+#define AMIGAHW_SET(name)       (amiga_hw_present.name = 1)
+#define AMIGAHW_PRESENT(name)   (amiga_hw_present.name)
+
+struct amiga_hw_present {
+    /* video hardware */
+    AMIGAHW_DECLARE(AMI_VIDEO);         /* Amiga Video */
+    AMIGAHW_DECLARE(AMI_BLITTER);       /* Amiga Blitter */
+    AMIGAHW_DECLARE(AMBER_FF);          /* Amber Flicker Fixer */
+    /* sound hardware */
+    AMIGAHW_DECLARE(AMI_AUDIO);         /* Amiga Audio */
+    /* disk storage interfaces */
+    AMIGAHW_DECLARE(AMI_FLOPPY);        /* Amiga Floppy */
+    AMIGAHW_DECLARE(A3000_SCSI);        /* SCSI (wd33c93, A3000 alike) */
+    AMIGAHW_DECLARE(A4000_SCSI);        /* SCSI (ncr53c710, A4000T alike) */
+    AMIGAHW_DECLARE(A1200_IDE);         /* IDE (A1200 alike) */
+    AMIGAHW_DECLARE(A4000_IDE);         /* IDE (A4000 alike) */
+    AMIGAHW_DECLARE(CD_ROM);            /* CD ROM drive */
+    /* other I/O hardware */
+    AMIGAHW_DECLARE(AMI_KEYBOARD);      /* Amiga Keyboard */
+    AMIGAHW_DECLARE(AMI_MOUSE);         /* Amiga Mouse */
+    AMIGAHW_DECLARE(AMI_SERIAL);        /* Amiga Serial */
+    AMIGAHW_DECLARE(AMI_PARALLEL);      /* Amiga Parallel */
+    /* real time clocks */
+    AMIGAHW_DECLARE(A2000_CLK);         /* Hardware Clock (A2000 alike) */
+    AMIGAHW_DECLARE(A3000_CLK);         /* Hardware Clock (A3000 alike) */
+    /* supporting hardware */
+    AMIGAHW_DECLARE(CHIP_RAM);          /* Chip RAM */
+    AMIGAHW_DECLARE(PAULA);             /* Paula (8364) */
+    AMIGAHW_DECLARE(DENISE);            /* Denise (8362) */
+    AMIGAHW_DECLARE(DENISE_HR);         /* Denise (8373) */
+    AMIGAHW_DECLARE(LISA);              /* Lisa (8375) */
+    AMIGAHW_DECLARE(AGNUS_PAL);         /* Normal/Fat PAL Agnus (8367/8371) */
+    AMIGAHW_DECLARE(AGNUS_NTSC);        /* Normal/Fat NTSC Agnus (8361/8370) */
+    AMIGAHW_DECLARE(AGNUS_HR_PAL);      /* Fat Hires PAL Agnus (8372) */
+    AMIGAHW_DECLARE(AGNUS_HR_NTSC);     /* Fat Hires NTSC Agnus (8372) */
+    AMIGAHW_DECLARE(ALICE_PAL);         /* PAL Alice (8374) */
+    AMIGAHW_DECLARE(ALICE_NTSC);        /* NTSC Alice (8374) */
+    AMIGAHW_DECLARE(MAGIC_REKICK);      /* A3000 Magic Hard Rekick */
+    AMIGAHW_DECLARE(PCMCIA);            /* PCMCIA Slot */
+    AMIGAHW_DECLARE(GG2_ISA);           /* GG2 Zorro2ISA Bridge */
+    AMIGAHW_DECLARE(ZORRO);             /* Zorro AutoConfig */
+    AMIGAHW_DECLARE(ZORRO3);            /* Zorro III */
+};
+
+extern struct amiga_hw_present amiga_hw_present;
+
+struct CUSTOM {
+    unsigned short bltddat;
+    unsigned short dmaconr;
+    unsigned short vposr;
+    unsigned short vhposr;
+    unsigned short dskdatr;
+    unsigned short joy0dat;
+    unsigned short joy1dat;
+    unsigned short clxdat;
+    unsigned short adkconr;
+    unsigned short pot0dat;
+    unsigned short pot1dat;
+    unsigned short potgor;
+    unsigned short serdatr;
+    unsigned short dskbytr;
+    unsigned short intenar;
+    unsigned short intreqr;
+    unsigned char  *dskptr;
+    unsigned short dsklen;
+    unsigned short dskdat;
+    unsigned short refptr;
+    unsigned short vposw;
+    unsigned short vhposw;
+    unsigned short copcon;
+    unsigned short serdat;
+    unsigned short serper;
+    unsigned short potgo;
+    unsigned short joytest;
+    unsigned short strequ;
+    unsigned short strvbl;
+    unsigned short strhor;
+    unsigned short strlong;
+    unsigned short bltcon0;
+    unsigned short bltcon1;
+    unsigned short bltafwm;
+    unsigned short bltalwm;
+    unsigned char  *bltcpt;
+    unsigned char  *bltbpt;
+    unsigned char  *bltapt;
+    unsigned char  *bltdpt;
+    unsigned short bltsize;
+    unsigned char  pad2d;
+    unsigned char  bltcon0l;
+    unsigned short bltsizv;
+    unsigned short bltsizh;
+    unsigned short bltcmod;
+    unsigned short bltbmod;
+    unsigned short bltamod;
+    unsigned short bltdmod;
+    unsigned short spare2[4];
+    unsigned short bltcdat;
+    unsigned short bltbdat;
+    unsigned short bltadat;
+    unsigned short spare3[3];
+    unsigned short deniseid;
+    unsigned short dsksync;
+    unsigned short *cop1lc;
+    unsigned short *cop2lc;
+    unsigned short copjmp1;
+    unsigned short copjmp2;
+    unsigned short copins;
+    unsigned short diwstrt;
+    unsigned short diwstop;
+    unsigned short ddfstrt;
+    unsigned short ddfstop;
+    unsigned short dmacon;
+    unsigned short clxcon;
+    unsigned short intena;
+    unsigned short intreq;
+    unsigned short adkcon;
+    struct {
+        unsigned short  *audlc;
+        unsigned short audlen;
+        unsigned short audper;
+        unsigned short audvol;
+        unsigned short auddat;
+        unsigned short audspare[2];
+    } aud[4];
+    unsigned char  *bplpt[8];
+    unsigned short bplcon0;
+    unsigned short bplcon1;
+    unsigned short bplcon2;
+    unsigned short bplcon3;
+    unsigned short bpl1mod;
+    unsigned short bpl2mod;
+    unsigned short bplcon4;
+    unsigned short clxcon2;
+    unsigned short bpldat[8];
+    unsigned char  *sprpt[8];
+    struct {
+        unsigned short pos;
+        unsigned short ctl;
+        unsigned short dataa;
+        unsigned short datab;
+    } spr[8];
+    unsigned short color[32];
+    unsigned short htotal;
+    unsigned short hsstop;
+    unsigned short hbstrt;
+    unsigned short hbstop;
+    unsigned short vtotal;
+    unsigned short vsstop;
+    unsigned short vbstrt;
+    unsigned short vbstop;
+    unsigned short sprhstrt;
+    unsigned short sprhstop;
+    unsigned short bplhstrt;
+    unsigned short bplhstop;
+    unsigned short hhposw;
+    unsigned short hhposr;
+    unsigned short beamcon0;
+    unsigned short hsstrt;
+    unsigned short vsstrt;
+    unsigned short hcenter;
+    unsigned short diwhigh;
+    unsigned short spare4[11];
+    unsigned short fmode;
+};
+
+/*
+ * DMA register bits
+ */
+#define DMAF_SETCLR             (0x8000)
+#define DMAF_AUD0               (0x0001)
+#define DMAF_AUD1               (0x0002)
+#define DMAF_AUD2               (0x0004)
+#define DMAF_AUD3               (0x0008)
+#define DMAF_DISK               (0x0010)
+#define DMAF_SPRITE             (0x0020)
+#define DMAF_BLITTER            (0x0040)
+#define DMAF_COPPER             (0x0080)
+#define DMAF_RASTER             (0x0100)
+#define DMAF_MASTER             (0x0200)
+#define DMAF_BLITHOG            (0x0400)
+#define DMAF_BLTNZERO           (0x2000)
+#define DMAF_BLTDONE            (0x4000)
+#define DMAF_ALL                (0x01FF)
+
+struct CIA {
+    unsigned char pra;          char pad0[0xff];
+    unsigned char prb;          char pad1[0xff];
+    unsigned char ddra;         char pad2[0xff];
+    unsigned char ddrb;         char pad3[0xff];
+    unsigned char talo;         char pad4[0xff];
+    unsigned char tahi;         char pad5[0xff];
+    unsigned char tblo;         char pad6[0xff];
+    unsigned char tbhi;         char pad7[0xff];
+    unsigned char todlo;        char pad8[0xff];
+    unsigned char todmid;       char pad9[0xff];
+    unsigned char todhi;        char pada[0x1ff];
+    unsigned char sdr;          char padb[0xff];
+    unsigned char icr;          char padc[0xff];
+    unsigned char cra;          char padd[0xff];
+    unsigned char crb;          char pade[0xff];
+};
+
+#define zTwoBase (0x80000000)
+#define ZTWO_PADDR(x) (((unsigned long)(x))-zTwoBase)
+#define ZTWO_VADDR(x) (((unsigned long)(x))+zTwoBase)
+
+#define CUSTOM_PHYSADDR     (0xdff000)
+#define amiga_custom ((*(volatile struct CUSTOM *)(zTwoBase+CUSTOM_PHYSADDR)))
+
+#define CIAA_PHYSADDR     (0xbfe001)
+#define CIAB_PHYSADDR     (0xbfd000)
+#define ciaa   ((*(volatile struct CIA *)(zTwoBase + CIAA_PHYSADDR)))
+#define ciab   ((*(volatile struct CIA *)(zTwoBase + CIAB_PHYSADDR)))
+
+#define CHIP_PHYSADDR       (0x000000)
+
+void amiga_chip_init (void);
+void *amiga_chip_alloc(unsigned long size, const char *name);
+void *amiga_chip_alloc_res(unsigned long size, struct resource *res);
+void amiga_chip_free(void *ptr);
+unsigned long amiga_chip_avail( void ); /*MILAN*/
+extern volatile unsigned short amiga_audio_min_period;
+
+static inline void amifb_video_off(void)
+{
+        if (amiga_chipset == CS_ECS || amiga_chipset == CS_AGA) {
+                /* program Denise/Lisa for a higher maximum play rate */
+                amiga_custom.htotal = 113;        /* 31 kHz */
+                amiga_custom.vtotal = 223;        /* 70 Hz */
+                amiga_custom.beamcon0 = 0x4390;   /* HARDDIS, VAR{BEAM,VSY,HSY,CSY}EN */
+                /* suspend the monitor */
+                amiga_custom.hsstrt = amiga_custom.hsstop = 116;
+                amiga_custom.vsstrt = amiga_custom.vsstop = 226;
+                amiga_audio_min_period = 57;
+        }
+}
+
+struct tod3000 {
+  unsigned int  :28, second2:4; /* lower digit */
+  unsigned int  :28, second1:4; /* upper digit */
+  unsigned int  :28, minute2:4; /* lower digit */
+  unsigned int  :28, minute1:4; /* upper digit */
+  unsigned int  :28, hour2:4;   /* lower digit */
+  unsigned int  :28, hour1:4;   /* upper digit */
+  unsigned int  :28, weekday:4;
+  unsigned int  :28, day2:4;    /* lower digit */
+  unsigned int  :28, day1:4;    /* upper digit */
+  unsigned int  :28, month2:4;  /* lower digit */
+  unsigned int  :28, month1:4;  /* upper digit */
+  unsigned int  :28, year2:4;   /* lower digit */
+  unsigned int  :28, year1:4;   /* upper digit */
+  unsigned int  :28, cntrl1:4;  /* control-byte 1 */
+  unsigned int  :28, cntrl2:4;  /* control-byte 2 */
+  unsigned int  :28, cntrl3:4;  /* control-byte 3 */
+};
+#define TOD3000_CNTRL1_HOLD     0
+#define TOD3000_CNTRL1_FREE     9
+#define tod_3000 ((*(volatile struct tod3000 *)(zTwoBase+0xDC0000)))
+
+struct tod2000 {
+  unsigned int  :28, second2:4; /* lower digit */
+  unsigned int  :28, second1:4; /* upper digit */
+  unsigned int  :28, minute2:4; /* lower digit */
+  unsigned int  :28, minute1:4; /* upper digit */
+  unsigned int  :28, hour2:4;   /* lower digit */
+  unsigned int  :28, hour1:4;   /* upper digit */
+  unsigned int  :28, day2:4;    /* lower digit */
+  unsigned int  :28, day1:4;    /* upper digit */
+  unsigned int  :28, month2:4;  /* lower digit */
+  unsigned int  :28, month1:4;  /* upper digit */
+  unsigned int  :28, year2:4;   /* lower digit */
+  unsigned int  :28, year1:4;   /* upper digit */
+  unsigned int  :28, weekday:4;
+  unsigned int  :28, cntrl1:4;  /* control-byte 1 */
+  unsigned int  :28, cntrl2:4;  /* control-byte 2 */
+  unsigned int  :28, cntrl3:4;  /* control-byte 3 */
+};
+
+#define TOD2000_CNTRL1_HOLD     (1<<0)
+#define TOD2000_CNTRL1_BUSY     (1<<1)
+#define TOD2000_CNTRL3_24HMODE  (1<<2)
+#define TOD2000_HOUR1_PM        (1<<2)
+#define tod_2000 ((*(volatile struct tod2000 *)(zTwoBase+0xDC0000)))
+
+#endif /* _M68K_AMIGAHW_H */
diff --git a/arch/m68k/include/asm/amigaints.h b/arch/m68k/include/asm/amigaints.h
new file mode 100644
index 000000000000..b1bcdb835ab9
--- /dev/null
+++ b/arch/m68k/include/asm/amigaints.h
@@ -0,0 +1,113 @@
+/*
+** amigaints.h -- Amiga Linux interrupt handling structs and prototypes
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 10/2/92 by Greg Harp
+*/
+
+#ifndef _ASMm68k_AMIGAINTS_H_
+#define _ASMm68k_AMIGAINTS_H_
+
+#include <asm/irq.h>
+
+/*
+** Amiga Interrupt sources.
+**
+*/
+
+#define AUTO_IRQS           (8)
+#define AMI_STD_IRQS        (14)
+#define CIA_IRQS            (5)
+#define AMI_IRQS            (32) /* AUTO_IRQS+AMI_STD_IRQS+2*CIA_IRQS */
+
+/* builtin serial port interrupts */
+#define IRQ_AMIGA_TBE           (IRQ_USER+0)
+#define IRQ_AMIGA_RBF           (IRQ_USER+11)
+
+/* floppy disk interrupts */
+#define IRQ_AMIGA_DSKBLK        (IRQ_USER+1)
+#define IRQ_AMIGA_DSKSYN        (IRQ_USER+12)
+
+/* software interrupts */
+#define IRQ_AMIGA_SOFT          (IRQ_USER+2)
+
+/* interrupts from external hardware */
+#define IRQ_AMIGA_PORTS         IRQ_AUTO_2
+#define IRQ_AMIGA_EXTER         IRQ_AUTO_6
+
+/* copper interrupt */
+#define IRQ_AMIGA_COPPER        (IRQ_USER+4)
+
+/* vertical blanking interrupt */
+#define IRQ_AMIGA_VERTB         (IRQ_USER+5)
+
+/* Blitter done interrupt */
+#define IRQ_AMIGA_BLIT          (IRQ_USER+6)
+
+/* Audio interrupts */
+#define IRQ_AMIGA_AUD0          (IRQ_USER+7)
+#define IRQ_AMIGA_AUD1          (IRQ_USER+8)
+#define IRQ_AMIGA_AUD2          (IRQ_USER+9)
+#define IRQ_AMIGA_AUD3          (IRQ_USER+10)
+
+/* CIA interrupt sources */
+#define IRQ_AMIGA_CIAA          (IRQ_USER+14)
+#define IRQ_AMIGA_CIAA_TA       (IRQ_USER+14)
+#define IRQ_AMIGA_CIAA_TB       (IRQ_USER+15)
+#define IRQ_AMIGA_CIAA_ALRM     (IRQ_USER+16)
+#define IRQ_AMIGA_CIAA_SP       (IRQ_USER+17)
+#define IRQ_AMIGA_CIAA_FLG      (IRQ_USER+18)
+#define IRQ_AMIGA_CIAB          (IRQ_USER+19)
+#define IRQ_AMIGA_CIAB_TA       (IRQ_USER+19)
+#define IRQ_AMIGA_CIAB_TB       (IRQ_USER+20)
+#define IRQ_AMIGA_CIAB_ALRM     (IRQ_USER+21)
+#define IRQ_AMIGA_CIAB_SP       (IRQ_USER+22)
+#define IRQ_AMIGA_CIAB_FLG      (IRQ_USER+23)
+
+
+/* INTREQR masks */
+#define IF_SETCLR   0x8000      /* set/clr bit */
+#define IF_INTEN    0x4000      /* master interrupt bit in INT* registers */
+#define IF_EXTER    0x2000      /* external level 6 and CIA B interrupt */
+#define IF_DSKSYN   0x1000      /* disk sync interrupt */
+#define IF_RBF      0x0800      /* serial receive buffer full interrupt */
+#define IF_AUD3     0x0400      /* audio channel 3 done interrupt */
+#define IF_AUD2     0x0200      /* audio channel 2 done interrupt */
+#define IF_AUD1     0x0100      /* audio channel 1 done interrupt */
+#define IF_AUD0     0x0080      /* audio channel 0 done interrupt */
+#define IF_BLIT     0x0040      /* blitter done interrupt */
+#define IF_VERTB    0x0020      /* vertical blanking interrupt */
+#define IF_COPER    0x0010      /* copper interrupt */
+#define IF_PORTS    0x0008      /* external level 2 and CIA A interrupt */
+#define IF_SOFT     0x0004      /* software initiated interrupt */
+#define IF_DSKBLK   0x0002      /* diskblock DMA finished */
+#define IF_TBE      0x0001      /* serial transmit buffer empty interrupt */
+
+/* CIA interrupt control register bits */
+
+#define CIA_ICR_TA      0x01
+#define CIA_ICR_TB      0x02
+#define CIA_ICR_ALRM    0x04
+#define CIA_ICR_SP      0x08
+#define CIA_ICR_FLG     0x10
+#define CIA_ICR_ALL     0x1f
+#define CIA_ICR_SETCLR  0x80
+
+extern void amiga_init_IRQ(void);
+
+/* to access the interrupt control registers of CIA's use only
+** these functions, they behave exactly like the amiga os routines
+*/
+
+extern struct ciabase ciaa_base, ciab_base;
+
+extern void cia_init_IRQ(struct ciabase *base);
+extern unsigned char cia_set_irq(struct ciabase *base, unsigned char mask);
+extern unsigned char cia_able_irq(struct ciabase *base, unsigned char mask);
+
+#endif /* asm-m68k/amigaints.h */
diff --git a/arch/m68k/include/asm/amigayle.h b/arch/m68k/include/asm/amigayle.h
new file mode 100644
index 000000000000..bb5a6aa329f3
--- /dev/null
+++ b/arch/m68k/include/asm/amigayle.h
@@ -0,0 +1,107 @@
+/*
+** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip
+**                        found on the Amiga 1200
+**                        This information was found by disassembling card.resource,
+**                        so the definitions may not be 100% correct
+**                        anyone has an official doc ?
+**
+** Copyright 1997 by Alain Malek
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 11/28/97 by Alain Malek
+*/
+
+#ifndef _M68K_AMIGAYLE_H_
+#define _M68K_AMIGAYLE_H_
+
+#include <linux/types.h>
+#include <asm/amigahw.h>
+
+/* memory layout */
+
+#define GAYLE_RAM               (0x600000+zTwoBase)
+#define GAYLE_RAMSIZE           (0x400000)
+#define GAYLE_ATTRIBUTE         (0xa00000+zTwoBase)
+#define GAYLE_ATTRIBUTESIZE     (0x020000)
+#define GAYLE_IO                (0xa20000+zTwoBase)     /* 16bit and even 8bit registers */
+#define GAYLE_IOSIZE            (0x010000)
+#define GAYLE_IO_8BITODD        (0xa30000+zTwoBase)     /* odd 8bit registers */
+
+/* offset for accessing odd IO registers */
+#define GAYLE_ODD               (GAYLE_IO_8BITODD-GAYLE_IO-1)
+
+/* GAYLE registers */
+
+struct GAYLE {
+        u_char cardstatus;
+        u_char pad0[0x1000-1];
+
+        u_char intreq;
+        u_char pad1[0x1000-1];
+
+        u_char inten;
+        u_char pad2[0x1000-1];
+
+        u_char config;
+        u_char pad3[0x1000-1];
+};
+
+#define GAYLE_ADDRESS   (0xda8000)      /* gayle main registers base address */
+
+#define GAYLE_RESET     (0xa40000)      /* write 0x00 to start reset,
+                                           read 1 byte to stop reset */
+
+#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
+#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))
+
+#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE))
+
+#if 0
+#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
+#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
+
+#define gayle_inw(a) readw( GAYLE_IO+(a) )
+#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) )
+#endif
+
+/* GAYLE_CARDSTATUS bit def */
+
+#define GAYLE_CS_CCDET          0x40    /* credit card detect */
+#define GAYLE_CS_BVD1           0x20    /* battery voltage detect 1 */
+#define GAYLE_CS_SC             0x20    /* credit card status change */
+#define GAYLE_CS_BVD2           0x10    /* battery voltage detect 2 */
+#define GAYLE_CS_DA             0x10    /* digital audio */
+#define GAYLE_CS_WR             0x08    /* write enable (1 == enabled) */
+#define GAYLE_CS_BSY            0x04    /* credit card busy */
+#define GAYLE_CS_IRQ            0x04    /* interrupt request */
+
+/* GAYLE_IRQ bit def */
+
+#define GAYLE_IRQ_IDE           0x80
+#define GAYLE_IRQ_CCDET         0x40
+#define GAYLE_IRQ_BVD1          0x20
+#define GAYLE_IRQ_SC            0x20
+#define GAYLE_IRQ_BVD2          0x10
+#define GAYLE_IRQ_DA            0x10
+#define GAYLE_IRQ_WR            0x08
+#define GAYLE_IRQ_BSY           0x04
+#define GAYLE_IRQ_IRQ           0x04
+#define GAYLE_IRQ_IDEACK1       0x02
+#define GAYLE_IRQ_IDEACK0       0x01
+
+/* GAYLE_CONFIG bit def
+   (bit 0-1 for program voltage, bit 2-3 for access speed */
+
+#define GAYLE_CFG_0V            0x00
+#define GAYLE_CFG_5V            0x01
+#define GAYLE_CFG_12V           0x02
+
+#define GAYLE_CFG_100NS         0x08
+#define GAYLE_CFG_150NS         0x04
+#define GAYLE_CFG_250NS         0x00
+#define GAYLE_CFG_720NS         0x0c
+
+#endif /* asm-m68k/amigayle.h */
diff --git a/arch/m68k/include/asm/amipcmcia.h b/arch/m68k/include/asm/amipcmcia.h
new file mode 100644
index 000000000000..6f1ec1887d82
--- /dev/null
+++ b/arch/m68k/include/asm/amipcmcia.h
@@ -0,0 +1,110 @@
+/*
+** asm-m68k/pcmcia.h -- Amiga Linux PCMCIA Definitions
+**
+** Copyright 1997 by Alain Malek
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 12/10/97 by Alain Malek
+*/
+
+#ifndef __AMIGA_PCMCIA_H__
+#define __AMIGA_PCMCIA_H__
+
+#include <asm/amigayle.h>
+
+/* prototypes */
+
+void pcmcia_reset(void);
+int pcmcia_copy_tuple(unsigned char tuple_id, void *tuple, int max_len);
+void pcmcia_program_voltage(int voltage);
+void pcmcia_access_speed(int speed);
+void pcmcia_write_enable(void);
+void pcmcia_write_disable(void);
+
+static inline u_char pcmcia_read_status(void)
+{
+        return (gayle.cardstatus & 0x7c);
+}
+
+static inline u_char pcmcia_get_intreq(void)
+{
+        return (gayle.intreq);
+}
+
+static inline void pcmcia_ack_int(u_char intreq)
+{
+        gayle.intreq = 0xf8;
+}
+
+static inline void pcmcia_enable_irq(void)
+{
+        gayle.inten |= GAYLE_IRQ_IRQ;
+}
+
+static inline void pcmcia_disable_irq(void)
+{
+        gayle.inten &= ~GAYLE_IRQ_IRQ;
+}
+
+#define PCMCIA_INSERTED (gayle.cardstatus & GAYLE_CS_CCDET)
+
+/* valid voltages for pcmcia_ProgramVoltage */
+
+#define PCMCIA_0V       0
+#define PCMCIA_5V       5
+#define PCMCIA_12V      12
+
+/* valid speeds for pcmcia_AccessSpeed */
+
+#define PCMCIA_SPEED_100NS      100
+#define PCMCIA_SPEED_150NS      150
+#define PCMCIA_SPEED_250NS      250
+#define PCMCIA_SPEED_720NS      720
+
+/* PCMCIA Tuple codes */
+
+#define CISTPL_NULL             0x00
+#define CISTPL_DEVICE           0x01
+#define CISTPL_LONGLINK_CB      0x02
+#define CISTPL_CONFIG_CB        0x04
+#define CISTPL_CFTABLE_ENTRY_CB 0x05
+#define CISTPL_LONGLINK_MFC     0x06
+#define CISTPL_BAR              0x07
+#define CISTPL_CHECKSUM         0x10
+#define CISTPL_LONGLINK_A       0x11
+#define CISTPL_LONGLINK_C       0x12
+#define CISTPL_LINKTARGET       0x13
+#define CISTPL_NO_LINK          0x14
+#define CISTPL_VERS_1           0x15
+#define CISTPL_ALTSTR           0x16
+#define CISTPL_DEVICE_A         0x17
+#define CISTPL_JEDEC_C          0x18
+#define CISTPL_JEDEC_A          0x19
+#define CISTPL_CONFIG           0x1a
+#define CISTPL_CFTABLE_ENTRY    0x1b
+#define CISTPL_DEVICE_OC        0x1c
+#define CISTPL_DEVICE_OA        0x1d
+#define CISTPL_DEVICE_GEO       0x1e
+#define CISTPL_DEVICE_GEO_A     0x1f
+#define CISTPL_MANFID           0x20
+#define CISTPL_FUNCID           0x21
+#define CISTPL_FUNCE            0x22
+#define CISTPL_SWIL             0x23
+#define CISTPL_END              0xff
+
+/* FUNCID */
+
+#define CISTPL_FUNCID_MULTI     0x00
+#define CISTPL_FUNCID_MEMORY    0x01
+#define CISTPL_FUNCID_SERIAL    0x02
+#define CISTPL_FUNCID_PARALLEL  0x03
+#define CISTPL_FUNCID_FIXED     0x04
+#define CISTPL_FUNCID_VIDEO     0x05
+#define CISTPL_FUNCID_NETWORK   0x06
+#define CISTPL_FUNCID_AIMS      0x07
+#define CISTPL_FUNCID_SCSI      0x08
+
+#endif
diff --git a/arch/m68k/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h
new file mode 100644
index 000000000000..871c0d5cfc3d
--- /dev/null
+++ b/arch/m68k/include/asm/anchor.h
@@ -0,0 +1,112 @@
+/****************************************************************************/
+
+/*
+ *      anchor.h -- Anchor CO-MEM Lite PCI host bridge part.
+ *
+ *      (C) Copyright 2000, Moreton Bay (www.moreton.com.au)
+ */
+
+/****************************************************************************/
+#ifndef anchor_h
+#define anchor_h
+/****************************************************************************/
+
+/*
+ *      Define basic addressing info.
+ */
+#if defined(CONFIG_M5407C3)
+#define COMEM_BASE      0xFFFF0000      /* Base of CO-MEM address space */
+#define COMEM_IRQ       25              /* IRQ of anchor part */
+#else
+#define COMEM_BASE      0x80000000      /* Base of CO-MEM address space */
+#define COMEM_IRQ       25              /* IRQ of anchor part */
+#endif
+
+/****************************************************************************/
+
+/*
+ *      4-byte registers of CO-MEM, so adjust register addresses for
+ *      easy access. Handy macro for word access too.
+ */
+#define LREG(a)         ((a) >> 2)
+#define WREG(a)         ((a) >> 1)
+
+
+/*
+ *      Define base addresses within CO-MEM Lite register address space.
+ */
+#define COMEM_I2O       0x0000          /* I2O registers */
+#define COMEM_OPREGS    0x0400          /* Operation registers */
+#define COMEM_PCIBUS    0x2000          /* Direct access to PCI bus */
+#define COMEM_SHMEM     0x4000          /* Shared memory region */
+
+#define COMEM_SHMEMSIZE 0x4000          /* Size of shared memory */
+
+
+/*
+ *      Define CO-MEM Registers.
+ */
+#define COMEM_I2OHISR   0x0030          /* I2O host interrupt status */
+#define COMEM_I2OHIMR   0x0034          /* I2O host interrupt mask */
+#define COMEM_I2OLISR   0x0038          /* I2O local interrupt status */
+#define COMEM_I2OLIMR   0x003c          /* I2O local interrupt mask */
+#define COMEM_IBFPFIFO  0x0040          /* I2O inbound free/post FIFO */
+#define COMEM_OBPFFIFO  0x0044          /* I2O outbound post/free FIFO */
+#define COMEM_IBPFFIFO  0x0048          /* I2O inbound post/free FIFO */
+#define COMEM_OBFPFIFO  0x004c          /* I2O outbound free/post FIFO */
+
+#define COMEM_DAHBASE   0x0460          /* Direct access base address */
+
+#define COMEM_NVCMD     0x04a0          /* I2C serial command */
+#define COMEM_NVREAD    0x04a4          /* I2C serial read */
+#define COMEM_NVSTAT    0x04a8          /* I2C status */
+
+#define COMEM_DMALBASE  0x04b0          /* DMA local base address */
+#define COMEM_DMAHBASE  0x04b4          /* DMA host base address */
+#define COMEM_DMASIZE   0x04b8          /* DMA size */
+#define COMEM_DMACTL    0x04bc          /* DMA control */
+
+#define COMEM_HCTL      0x04e0          /* Host control */
+#define COMEM_HINT      0x04e4          /* Host interrupt control/status */
+#define COMEM_HLDATA    0x04e8          /* Host to local data mailbox */
+#define COMEM_LINT      0x04f4          /* Local interrupt contole status */
+#define COMEM_LHDATA    0x04f8          /* Local to host data mailbox */
+
+#define COMEM_LBUSCFG   0x04fc          /* Local bus configuration */
+
+
+/*
+ *      Commands and flags for use with Direct Access Register.
+ */
+#define COMEM_DA_IACK   0x00000000      /* Interrupt acknowledge (read) */
+#define COMEM_DA_SPCL   0x00000010      /* Special cycle (write) */
+#define COMEM_DA_MEMRD  0x00000004      /* Memory read cycle */
+#define COMEM_DA_MEMWR  0x00000004      /* Memory write cycle */
+#define COMEM_DA_IORD   0x00000002      /* I/O read cycle */
+#define COMEM_DA_IOWR   0x00000002      /* I/O write cycle */
+#define COMEM_DA_CFGRD  0x00000006      /* Configuration read cycle */
+#define COMEM_DA_CFGWR  0x00000006      /* Configuration write cycle */
+
+#define COMEM_DA_ADDR(a)        ((a) & 0xffffe000)
+
+#define COMEM_DA_OFFSET(a)      ((a) & 0x00001fff)
+
+
+/*
+ *      The PCI bus will be limited in what slots will actually be used.
+ *      Define valid device numbers for different boards.
+ */
+#if defined(CONFIG_M5407C3)
+#define COMEM_MINDEV    14              /* Minimum valid DEVICE */
+#define COMEM_MAXDEV    14              /* Maximum valid DEVICE */
+#define COMEM_BRIDGEDEV 15              /* Slot bridge is in */
+#else
+#define COMEM_MINDEV    0               /* Minimum valid DEVICE */
+#define COMEM_MAXDEV    3               /* Maximum valid DEVICE */
+#endif
+
+#define COMEM_MAXPCI    (COMEM_MAXDEV+1)        /* Maximum PCI devices */
+
+
+/****************************************************************************/
+#endif  /* anchor_h */
diff --git a/arch/m68k/include/asm/apollodma.h b/arch/m68k/include/asm/apollodma.h
new file mode 100644
index 000000000000..954adc851adb
--- /dev/null
+++ b/arch/m68k/include/asm/apollodma.h
@@ -0,0 +1,248 @@
+/*
+ * linux/include/asm/dma.h: Defines for using and allocating dma channels.
+ * Written by Hennus Bergman, 1992.
+ * High DMA channel support & info by Hannu Savolainen
+ * and John Boyd, Nov. 1992.
+ */
+
+#ifndef _ASM_APOLLO_DMA_H
+#define _ASM_APOLLO_DMA_H
+
+#include <asm/apollohw.h>               /* need byte IO */
+#include <linux/spinlock.h>             /* And spinlocks */
+#include <linux/delay.h>
+
+
+#define dma_outb(val,addr) (*((volatile unsigned char *)(addr+IO_BASE)) = (val))
+#define dma_inb(addr)      (*((volatile unsigned char *)(addr+IO_BASE)))
+
+/*
+ * NOTES about DMA transfers:
+ *
+ *  controller 1: channels 0-3, byte operations, ports 00-1F
+ *  controller 2: channels 4-7, word operations, ports C0-DF
+ *
+ *  - ALL registers are 8 bits only, regardless of transfer size
+ *  - channel 4 is not used - cascades 1 into 2.
+ *  - channels 0-3 are byte - addresses/counts are for physical bytes
+ *  - channels 5-7 are word - addresses/counts are for physical words
+ *  - transfers must not cross physical 64K (0-3) or 128K (5-7) boundaries
+ *  - transfer count loaded to registers is 1 less than actual count
+ *  - controller 2 offsets are all even (2x offsets for controller 1)
+ *  - page registers for 5-7 don't use data bit 0, represent 128K pages
+ *  - page registers for 0-3 use bit 0, represent 64K pages
+ *
+ * DMA transfers are limited to the lower 16MB of _physical_ memory.
+ * Note that addresses loaded into registers must be _physical_ addresses,
+ * not logical addresses (which may differ if paging is active).
+ *
+ *  Address mapping for channels 0-3:
+ *
+ *   A23 ... A16 A15 ... A8  A7 ... A0    (Physical addresses)
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *    |  ...  |   |  ... |   |  ... |
+ *   P7  ...  P0  A7 ... A0  A7 ... A0
+ * |    Page    | Addr MSB | Addr LSB |   (DMA registers)
+ *
+ *  Address mapping for channels 5-7:
+ *
+ *   A23 ... A17 A16 A15 ... A9 A8 A7 ... A1 A0    (Physical addresses)
+ *    |  ...  |   \   \   ... \  \  \  ... \  \
+ *    |  ...  |    \   \   ... \  \  \  ... \  (not used)
+ *    |  ...  |     \   \   ... \  \  \  ... \
+ *   P7  ...  P1 (0) A7 A6  ... A0 A7 A6 ... A0
+ * |      Page      |  Addr MSB   |  Addr LSB  |   (DMA registers)
+ *
+ * Again, channels 5-7 transfer _physical_ words (16 bits), so addresses
+ * and counts _must_ be word-aligned (the lowest address bit is _ignored_ at
+ * the hardware level, so odd-byte transfers aren't possible).
+ *
+ * Transfer count (_not # bytes_) is limited to 64K, represented as actual
+ * count - 1 : 64K => 0xFFFF, 1 => 0x0000.  Thus, count is always 1 or more,
+ * and up to 128K bytes may be transferred on channels 5-7 in one operation.
+ *
+ */
+
+#define MAX_DMA_CHANNELS        8
+
+/* The maximum address that we can perform a DMA transfer to on this platform */#define MAX_DMA_ADDRESS      (PAGE_OFFSET+0x1000000)
+
+/* 8237 DMA controllers */
+#define IO_DMA1_BASE    0x10C00 /* 8 bit slave DMA, channels 0..3 */
+#define IO_DMA2_BASE    0x10D00 /* 16 bit master DMA, ch 4(=slave input)..7 */
+
+/* DMA controller registers */
+#define DMA1_CMD_REG            (IO_DMA1_BASE+0x08) /* command register (w) */
+#define DMA1_STAT_REG           (IO_DMA1_BASE+0x08) /* status register (r) */
+#define DMA1_REQ_REG            (IO_DMA1_BASE+0x09) /* request register (w) */
+#define DMA1_MASK_REG           (IO_DMA1_BASE+0x0A) /* single-channel mask (w) */
+#define DMA1_MODE_REG           (IO_DMA1_BASE+0x0B) /* mode register (w) */
+#define DMA1_CLEAR_FF_REG       (IO_DMA1_BASE+0x0C) /* clear pointer flip-flop (w) */
+#define DMA1_TEMP_REG           (IO_DMA1_BASE+0x0D) /* Temporary Register (r) */
+#define DMA1_RESET_REG          (IO_DMA1_BASE+0x0D) /* Master Clear (w) */
+#define DMA1_CLR_MASK_REG       (IO_DMA1_BASE+0x0E) /* Clear Mask */
+#define DMA1_MASK_ALL_REG       (IO_DMA1_BASE+0x0F) /* all-channels mask (w) */
+
+#define DMA2_CMD_REG            (IO_DMA2_BASE+0x10) /* command register (w) */
+#define DMA2_STAT_REG           (IO_DMA2_BASE+0x10) /* status register (r) */
+#define DMA2_REQ_REG            (IO_DMA2_BASE+0x12) /* request register (w) */
+#define DMA2_MASK_REG           (IO_DMA2_BASE+0x14) /* single-channel mask (w) */
+#define DMA2_MODE_REG           (IO_DMA2_BASE+0x16) /* mode register (w) */
+#define DMA2_CLEAR_FF_REG       (IO_DMA2_BASE+0x18) /* clear pointer flip-flop (w) */
+#define DMA2_TEMP_REG           (IO_DMA2_BASE+0x1A) /* Temporary Register (r) */
+#define DMA2_RESET_REG          (IO_DMA2_BASE+0x1A) /* Master Clear (w) */
+#define DMA2_CLR_MASK_REG       (IO_DMA2_BASE+0x1C) /* Clear Mask */
+#define DMA2_MASK_ALL_REG       (IO_DMA2_BASE+0x1E) /* all-channels mask (w) */
+
+#define DMA_ADDR_0              (IO_DMA1_BASE+0x00) /* DMA address registers */
+#define DMA_ADDR_1              (IO_DMA1_BASE+0x02)
+#define DMA_ADDR_2              (IO_DMA1_BASE+0x04)
+#define DMA_ADDR_3              (IO_DMA1_BASE+0x06)
+#define DMA_ADDR_4              (IO_DMA2_BASE+0x00)
+#define DMA_ADDR_5              (IO_DMA2_BASE+0x04)
+#define DMA_ADDR_6              (IO_DMA2_BASE+0x08)
+#define DMA_ADDR_7              (IO_DMA2_BASE+0x0C)
+
+#define DMA_CNT_0               (IO_DMA1_BASE+0x01)   /* DMA count registers */
+#define DMA_CNT_1               (IO_DMA1_BASE+0x03)
+#define DMA_CNT_2               (IO_DMA1_BASE+0x05)
+#define DMA_CNT_3               (IO_DMA1_BASE+0x07)
+#define DMA_CNT_4               (IO_DMA2_BASE+0x02)
+#define DMA_CNT_5               (IO_DMA2_BASE+0x06)
+#define DMA_CNT_6               (IO_DMA2_BASE+0x0A)
+#define DMA_CNT_7               (IO_DMA2_BASE+0x0E)
+
+#define DMA_MODE_READ   0x44    /* I/O to memory, no autoinit, increment, single mode */
+#define DMA_MODE_WRITE  0x48    /* memory to I/O, no autoinit, increment, single mode */
+#define DMA_MODE_CASCADE 0xC0   /* pass thru DREQ->HRQ, DACK<-HLDA only */
+
+#define DMA_AUTOINIT    0x10
+
+#define DMA_8BIT 0
+#define DMA_16BIT 1
+#define DMA_BUSMASTER 2
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&dma_spin_lock, flags);
+        return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+        spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+        if (dmanr<=3)
+                dma_outb(dmanr,  DMA1_MASK_REG);
+        else
+                dma_outb(dmanr & 3,  DMA2_MASK_REG);
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+        if (dmanr<=3)
+                dma_outb(dmanr | 4,  DMA1_MASK_REG);
+        else
+                dma_outb((dmanr & 3) | 4,  DMA2_MASK_REG);
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+        if (dmanr<=3)
+                dma_outb(0,  DMA1_CLEAR_FF_REG);
+        else
+                dma_outb(0,  DMA2_CLEAR_FF_REG);
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+        if (dmanr<=3)
+                dma_outb(mode | dmanr,  DMA1_MODE_REG);
+        else
+                dma_outb(mode | (dmanr&3),  DMA2_MODE_REG);
+}
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+        if (dmanr <= 3)  {
+            dma_outb( a & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+            dma_outb( (a>>8) & 0xff, ((dmanr&3)<<1) + IO_DMA1_BASE );
+        }  else  {
+            dma_outb( (a>>1) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+            dma_outb( (a>>9) & 0xff, ((dmanr&3)<<2) + IO_DMA2_BASE );
+        }
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+        count--;
+        if (dmanr <= 3)  {
+            dma_outb( count & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+            dma_outb( (count>>8) & 0xff, ((dmanr&3)<<1) + 1 + IO_DMA1_BASE );
+        } else {
+            dma_outb( (count>>1) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+            dma_outb( (count>>9) & 0xff, ((dmanr&3)<<2) + 2 + IO_DMA2_BASE );
+        }
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+        unsigned int io_port = (dmanr<=3)? ((dmanr&3)<<1) + 1 + IO_DMA1_BASE
+                                         : ((dmanr&3)<<2) + 2 + IO_DMA2_BASE;
+
+        /* using short to get 16-bit wrap around */
+        unsigned short count;
+
+        count = 1 + dma_inb(io_port);
+        count += dma_inb(io_port) << 8;
+
+        return (dmanr<=3)? count : (count<<1);
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char * device_id);     /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);       /* release it again */
+
+/* These are in arch/m68k/apollo/dma.c: */
+extern unsigned short dma_map_page(unsigned long phys_addr,int count,int type);
+extern void dma_unmap_page(unsigned short dma_addr);
+
+#endif /* _ASM_APOLLO_DMA_H */
diff --git a/arch/m68k/include/asm/apollohw.h b/arch/m68k/include/asm/apollohw.h
new file mode 100644
index 000000000000..a1373b9aa281
--- /dev/null
+++ b/arch/m68k/include/asm/apollohw.h
@@ -0,0 +1,108 @@
+/* apollohw.h : some structures to access apollo HW */
+
+#ifndef _ASMm68k_APOLLOHW_H_
+#define _ASMm68k_APOLLOHW_H_
+
+#include <linux/types.h>
+
+/*
+   apollo models
+*/
+
+extern u_long apollo_model;
+
+#define APOLLO_UNKNOWN (0)
+#define APOLLO_DN3000 (1)
+#define APOLLO_DN3010 (2)
+#define APOLLO_DN3500 (3)
+#define APOLLO_DN4000 (4)
+#define APOLLO_DN4500 (5)
+
+/*
+   see scn2681 data sheet for more info.
+   member names are read_write.
+*/
+
+#define DECLARE_2681_FIELD(x) unsigned char x; unsigned char dummy##x
+
+struct SCN2681 {
+
+        DECLARE_2681_FIELD(mra);
+        DECLARE_2681_FIELD(sra_csra);
+        DECLARE_2681_FIELD(BRGtest_cra);
+        DECLARE_2681_FIELD(rhra_thra);
+        DECLARE_2681_FIELD(ipcr_acr);
+        DECLARE_2681_FIELD(isr_imr);
+        DECLARE_2681_FIELD(ctu_ctur);
+        DECLARE_2681_FIELD(ctl_ctlr);
+        DECLARE_2681_FIELD(mrb);
+        DECLARE_2681_FIELD(srb_csrb);
+        DECLARE_2681_FIELD(tst_crb);
+        DECLARE_2681_FIELD(rhrb_thrb);
+        DECLARE_2681_FIELD(reserved);
+        DECLARE_2681_FIELD(ip_opcr);
+        DECLARE_2681_FIELD(startCnt_setOutBit);
+        DECLARE_2681_FIELD(stopCnt_resetOutBit);
+
+};
+
+#if 0
+struct mc146818 {
+
+        unsigned int second1:4, second2:4, alarm_second1:4, alarm_second2:4,
+                     minute1:4, minute2:4, alarm_minute1:4, alarm_minute2:4;
+        unsigned int hours1:4, hours2:4, alarm_hours1:4, alarm_hours2:4,
+                     day_of_week1:4, day_of_week2:4, day_of_month1:4, day_of_month2:4;
+        unsigned int month1:4, month2:4, year1:4, year2:4, :16;
+
+};
+#endif
+
+struct mc146818 {
+        unsigned char second, alarm_second;
+        unsigned char minute, alarm_minute;
+        unsigned char hours, alarm_hours;
+        unsigned char day_of_week, day_of_month;
+        unsigned char month, year;
+};
+
+
+#define IO_BASE 0x80000000
+
+extern u_long sio01_physaddr;
+extern u_long sio23_physaddr;
+extern u_long rtc_physaddr;
+extern u_long pica_physaddr;
+extern u_long picb_physaddr;
+extern u_long cpuctrl_physaddr;
+extern u_long timer_physaddr;
+
+#define SAU7_SIO01_PHYSADDR 0x10400
+#define SAU7_SIO23_PHYSADDR 0x10500
+#define SAU7_RTC_PHYSADDR 0x10900
+#define SAU7_PICA 0x11000
+#define SAU7_PICB 0x11100
+#define SAU7_CPUCTRL 0x10100
+#define SAU7_TIMER 0x010800
+
+#define SAU8_SIO01_PHYSADDR 0x8400
+#define SAU8_RTC_PHYSADDR 0x8900
+#define SAU8_PICA 0x9400
+#define SAU8_PICB 0x9500
+#define SAU8_CPUCTRL 0x8100
+#define SAU8_TIMER 0x8800
+
+#define sio01 ((*(volatile struct SCN2681 *)(IO_BASE + sio01_physaddr)))
+#define sio23 ((*(volatile struct SCN2681 *)(IO_BASE + sio23_physaddr)))
+#define rtc (((volatile struct mc146818 *)(IO_BASE + rtc_physaddr)))
+#define cpuctrl (*(volatile unsigned int *)(IO_BASE + cpuctrl_physaddr))
+#define pica (IO_BASE + pica_physaddr)
+#define picb (IO_BASE + picb_physaddr)
+#define timer (IO_BASE + timer_physaddr)
+#define addr_xlat_map ((unsigned short *)(IO_BASE + 0x17000))
+
+#define isaIO2mem(x) (((((x) & 0x3f8)  << 7) | (((x) & 0xfc00) >> 6) | ((x) & 0x7)) + 0x40000 + IO_BASE)
+
+#define IRQ_APOLLO      IRQ_USER
+
+#endif
diff --git a/arch/m68k/include/asm/atafd.h b/arch/m68k/include/asm/atafd.h
new file mode 100644
index 000000000000..8456889ee7da
--- /dev/null
+++ b/arch/m68k/include/asm/atafd.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_M68K_FD_H
+#define _ASM_M68K_FD_H
+
+/* Definitions for the Atari Floppy driver */
+
+struct atari_format_descr {
+    int track;                  /* to be formatted */
+    int head;                   /*   ""     ""     */
+    int sect_offset;            /* offset of first sector */
+};
+
+#endif
diff --git a/arch/m68k/include/asm/atafdreg.h b/arch/m68k/include/asm/atafdreg.h
new file mode 100644
index 000000000000..bbf80949fd9f
--- /dev/null
+++ b/arch/m68k/include/asm/atafdreg.h
@@ -0,0 +1,79 @@
+#ifndef _LINUX_FDREG_H
+#define _LINUX_FDREG_H
+
+/*
+** WD1772 stuff
+ */
+
+/* register codes */
+
+#define FDCSELREG_STP   (0x80)   /* command/status register */
+#define FDCSELREG_TRA   (0x82)   /* track register */
+#define FDCSELREG_SEC   (0x84)   /* sector register */
+#define FDCSELREG_DTA   (0x86)   /* data register */
+
+/* register names for FDC_READ/WRITE macros */
+
+#define FDCREG_CMD              0
+#define FDCREG_STATUS   0
+#define FDCREG_TRACK    2
+#define FDCREG_SECTOR   4
+#define FDCREG_DATA             6
+
+/* command opcodes */
+
+#define FDCCMD_RESTORE  (0x00)   /*  -                   */
+#define FDCCMD_SEEK     (0x10)   /*   |                  */
+#define FDCCMD_STEP     (0x20)   /*   |  TYP 1 Commands  */
+#define FDCCMD_STIN     (0x40)   /*   |                  */
+#define FDCCMD_STOT     (0x60)   /*  -                   */
+#define FDCCMD_RDSEC    (0x80)   /*  -   TYP 2 Commands  */
+#define FDCCMD_WRSEC    (0xa0)   /*  -          "        */
+#define FDCCMD_RDADR    (0xc0)   /*  -                   */
+#define FDCCMD_RDTRA    (0xe0)   /*   |  TYP 3 Commands  */
+#define FDCCMD_WRTRA    (0xf0)   /*  -                   */
+#define FDCCMD_FORCI    (0xd0)   /*  -   TYP 4 Command   */
+
+/* command modifier bits */
+
+#define FDCCMDADD_SR6   (0x00)   /* step rate settings */
+#define FDCCMDADD_SR12  (0x01)
+#define FDCCMDADD_SR2   (0x02)
+#define FDCCMDADD_SR3   (0x03)
+#define FDCCMDADD_V     (0x04)   /* verify */
+#define FDCCMDADD_H     (0x08)   /* wait for spin-up */
+#define FDCCMDADD_U     (0x10)   /* update track register */
+#define FDCCMDADD_M     (0x10)   /* multiple sector access */
+#define FDCCMDADD_E     (0x04)   /* head settling flag */
+#define FDCCMDADD_P     (0x02)   /* precompensation off */
+#define FDCCMDADD_A0    (0x01)   /* DAM flag */
+
+/* status register bits */
+
+#define FDCSTAT_MOTORON (0x80)   /* motor on */
+#define FDCSTAT_WPROT   (0x40)   /* write protected (FDCCMD_WR*) */
+#define FDCSTAT_SPINUP  (0x20)   /* motor speed stable (Type I) */
+#define FDCSTAT_DELDAM  (0x20)   /* sector has deleted DAM (Type II+III) */
+#define FDCSTAT_RECNF   (0x10)   /* record not found */
+#define FDCSTAT_CRC             (0x08)   /* CRC error */
+#define FDCSTAT_TR00    (0x04)   /* Track 00 flag (Type I) */
+#define FDCSTAT_LOST    (0x04)   /* Lost Data (Type II+III) */
+#define FDCSTAT_IDX             (0x02)   /* Index status (Type I) */
+#define FDCSTAT_DRQ             (0x02)   /* DRQ status (Type II+III) */
+#define FDCSTAT_BUSY    (0x01)   /* FDC is busy */
+
+
+/* PSG Port A Bit Nr 0 .. Side Sel .. 0 -> Side 1  1 -> Side 2 */
+#define DSKSIDE     (0x01)
+
+#define DSKDRVNONE  (0x06)
+#define DSKDRV0     (0x02)
+#define DSKDRV1     (0x04)
+
+/* step rates */
+#define FDCSTEP_6       0x00
+#define FDCSTEP_12      0x01
+#define FDCSTEP_2       0x02
+#define FDCSTEP_3       0x03
+
+#endif
diff --git a/arch/m68k/include/asm/atari_joystick.h b/arch/m68k/include/asm/atari_joystick.h
new file mode 100644
index 000000000000..93be7da9f2c7
--- /dev/null
+++ b/arch/m68k/include/asm/atari_joystick.h
@@ -0,0 +1,22 @@
+#ifndef _LINUX_ATARI_JOYSTICK_H
+#define _LINUX_ATARI_JOYSTICK_H
+
+/*
+ * linux/include/linux/atari_joystick.h
+ * header file for Atari Joystick driver
+ * by Robert de Vries (robert@and.nl) on 19Jul93
+ */
+
+void atari_joystick_interrupt(char*);
+int atari_joystick_init(void);
+extern int atari_mouse_buttons;
+
+struct joystick_status {
+        char            fire;
+        char            dir;
+        int             ready;
+        int             active;
+        wait_queue_head_t wait;
+};
+
+#endif
diff --git a/arch/m68k/include/asm/atari_stdma.h b/arch/m68k/include/asm/atari_stdma.h
new file mode 100644
index 000000000000..8e389b7fa70c
--- /dev/null
+++ b/arch/m68k/include/asm/atari_stdma.h
@@ -0,0 +1,22 @@
+
+#ifndef _atari_stdma_h
+#define _atari_stdma_h
+
+
+#include <linux/interrupt.h>
+
+
+/***************************** Prototypes *****************************/
+
+void stdma_lock(irq_handler_t handler, void *data);
+void stdma_release( void );
+int stdma_others_waiting( void );
+int stdma_islocked( void );
+void *stdma_locked_by( void );
+void stdma_init( void );
+
+/************************* End of Prototypes **************************/
+
+
+
+#endif  /* _atari_stdma_h */
diff --git a/arch/m68k/include/asm/atari_stram.h b/arch/m68k/include/asm/atari_stram.h
new file mode 100644
index 000000000000..7546d13963be
--- /dev/null
+++ b/arch/m68k/include/asm/atari_stram.h
@@ -0,0 +1,17 @@
+#ifndef _M68K_ATARI_STRAM_H
+#define _M68K_ATARI_STRAM_H
+
+/*
+ * Functions for Atari ST-RAM management
+ */
+
+/* public interface */
+void *atari_stram_alloc(long size, const char *owner);
+void atari_stram_free(void *);
+
+/* functions called internally by other parts of the kernel */
+void atari_stram_init(void);
+void atari_stram_reserve_pages(void *start_mem);
+void atari_stram_mem_init_hook (void);
+
+#endif /*_M68K_ATARI_STRAM_H */
diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h
new file mode 100644
index 000000000000..1412b4ab202f
--- /dev/null
+++ b/arch/m68k/include/asm/atarihw.h
@@ -0,0 +1,807 @@
+/*
+** linux/atarihw.h -- This header defines some macros and pointers for
+**                    the various Atari custom hardware registers.
+**
+** Copyright 1994 by Björn Brauel
+**
+** 5/1/94 Roman Hodek:
+**   Added definitions for TT specific chips.
+**
+** 1996-09-13 lars brinkhoff <f93labr@dd.chalmers.se>:
+**   Finally added definitions for the matrix/codec and the DSP56001 host
+**   interface.
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _LINUX_ATARIHW_H_
+#define _LINUX_ATARIHW_H_
+
+#include <linux/types.h>
+#include <asm/bootinfo.h>
+#include <asm/raw_io.h>
+
+extern u_long atari_mch_cookie;
+extern u_long atari_mch_type;
+extern u_long atari_switches;
+extern int atari_rtc_year_offset;
+extern int atari_dont_touch_floppy_select;
+
+/* convenience macros for testing machine type */
+#define MACH_IS_ST      ((atari_mch_cookie >> 16) == ATARI_MCH_ST)
+#define MACH_IS_STE     ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
+                         (atari_mch_cookie & 0xffff) == 0)
+#define MACH_IS_MSTE    ((atari_mch_cookie >> 16) == ATARI_MCH_STE && \
+                         (atari_mch_cookie & 0xffff) == 0x10)
+#define MACH_IS_TT      ((atari_mch_cookie >> 16) == ATARI_MCH_TT)
+#define MACH_IS_FALCON  ((atari_mch_cookie >> 16) == ATARI_MCH_FALCON)
+#define MACH_IS_MEDUSA  (atari_mch_type == ATARI_MACH_MEDUSA)
+#define MACH_IS_AB40    (atari_mch_type == ATARI_MACH_AB40)
+
+/* values for atari_switches */
+#define ATARI_SWITCH_IKBD       0x01
+#define ATARI_SWITCH_MIDI       0x02
+#define ATARI_SWITCH_SND6       0x04
+#define ATARI_SWITCH_SND7       0x08
+#define ATARI_SWITCH_OVSC_SHIFT 16
+#define ATARI_SWITCH_OVSC_IKBD  (ATARI_SWITCH_IKBD << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_MIDI  (ATARI_SWITCH_MIDI << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_SND6  (ATARI_SWITCH_SND6 << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_SND7  (ATARI_SWITCH_SND7 << ATARI_SWITCH_OVSC_SHIFT)
+#define ATARI_SWITCH_OVSC_MASK  0xffff0000
+
+/*
+ * Define several Hardware-Chips for indication so that for the ATARI we do
+ * no longer decide whether it is a Falcon or other machine . It's just
+ * important what hardware the machine uses
+ */
+
+/* ++roman 08/08/95: rewritten from ORing constants to a C bitfield */
+
+#define ATARIHW_DECLARE(name)   unsigned name : 1
+#define ATARIHW_SET(name)       (atari_hw_present.name = 1)
+#define ATARIHW_PRESENT(name)   (atari_hw_present.name)
+
+struct atari_hw_present {
+    /* video hardware */
+    ATARIHW_DECLARE(STND_SHIFTER);      /* ST-Shifter - no base low ! */
+    ATARIHW_DECLARE(EXTD_SHIFTER);      /* STe-Shifter - 24 bit address */
+    ATARIHW_DECLARE(TT_SHIFTER);        /* TT-Shifter */
+    ATARIHW_DECLARE(VIDEL_SHIFTER);     /* Falcon-Shifter */
+    /* sound hardware */
+    ATARIHW_DECLARE(YM_2149);           /* Yamaha YM 2149 */
+    ATARIHW_DECLARE(PCM_8BIT);          /* PCM-Sound in STe-ATARI */
+    ATARIHW_DECLARE(CODEC);             /* CODEC Sound (Falcon) */
+    /* disk storage interfaces */
+    ATARIHW_DECLARE(TT_SCSI);           /* Directly mapped NCR5380 */
+    ATARIHW_DECLARE(ST_SCSI);           /* NCR5380 via ST-DMA (Falcon) */
+    ATARIHW_DECLARE(ACSI);              /* Standard ACSI like in STs */
+    ATARIHW_DECLARE(IDE);               /* IDE Interface */
+    ATARIHW_DECLARE(FDCSPEED);          /* 8/16 MHz switch for FDC */
+    /* other I/O hardware */
+    ATARIHW_DECLARE(ST_MFP);            /* The ST-MFP (there should be no Atari
+                                           without it... but who knows?) */
+    ATARIHW_DECLARE(TT_MFP);            /* 2nd MFP */
+    ATARIHW_DECLARE(SCC);               /* Serial Communications Contr. */
+    ATARIHW_DECLARE(ST_ESCC);           /* SCC Z83230 in an ST */
+    ATARIHW_DECLARE(ANALOG_JOY);        /* Paddle Interface for STe
+                                           and Falcon */
+    ATARIHW_DECLARE(MICROWIRE);         /* Microwire Interface */
+    /* DMA */
+    ATARIHW_DECLARE(STND_DMA);          /* 24 Bit limited ST-DMA */
+    ATARIHW_DECLARE(EXTD_DMA);          /* 32 Bit ST-DMA */
+    ATARIHW_DECLARE(SCSI_DMA);          /* DMA for the NCR5380 */
+    ATARIHW_DECLARE(SCC_DMA);           /* DMA for the SCC */
+    /* real time clocks */
+    ATARIHW_DECLARE(TT_CLK);            /* TT compatible clock chip */
+    ATARIHW_DECLARE(MSTE_CLK);          /* Mega ST(E) clock chip */
+    /* supporting hardware */
+    ATARIHW_DECLARE(SCU);               /* System Control Unit */
+    ATARIHW_DECLARE(BLITTER);           /* Blitter */
+    ATARIHW_DECLARE(VME);               /* VME Bus */
+    ATARIHW_DECLARE(DSP56K);            /* DSP56k processor in Falcon */
+};
+
+extern struct atari_hw_present atari_hw_present;
+
+
+/* Reading the MFP port register gives a machine independent delay, since the
+ * MFP always has a 8 MHz clock. This avoids problems with the varying length
+ * of nops on various machines. Somebody claimed that the tstb takes 600 ns.
+ */
+#define MFPDELAY() \
+        __asm__ __volatile__ ( "tstb %0" : : "m" (mfp.par_dt_reg) : "cc" );
+
+/* Do cache push/invalidate for DMA read/write. This function obeys the
+ * snooping on some machines (Medusa) and processors: The Medusa itself can
+ * snoop, but only the '040 can source data from its cache to DMA writes i.e.,
+ * reads from memory). Both '040 and '060 invalidate cache entries on snooped
+ * DMA reads (i.e., writes to memory).
+ */
+
+
+#define atari_readb   raw_inb
+#define atari_writeb  raw_outb
+
+#define atari_inb_p   raw_inb
+#define atari_outb_p  raw_outb
+
+
+
+#include <linux/mm.h>
+#include <asm/cacheflush.h>
+
+static inline void dma_cache_maintenance( unsigned long paddr,
+                                          unsigned long len,
+                                          int writeflag )
+
+{
+        if (writeflag) {
+                if (!MACH_IS_MEDUSA || CPU_IS_060)
+                        cache_push( paddr, len );
+        }
+        else {
+                if (!MACH_IS_MEDUSA)
+                        cache_clear( paddr, len );
+        }
+}
+
+
+/*
+** Shifter
+ */
+#define ST_LOW  0
+#define ST_MID  1
+#define ST_HIGH 2
+#define TT_LOW  7
+#define TT_MID  4
+#define TT_HIGH 6
+
+#define SHF_BAS (0xffff8200)
+struct SHIFTER
+ {
+        u_char pad1;
+        u_char bas_hi;
+        u_char pad2;
+        u_char bas_md;
+        u_char pad3;
+        u_char volatile vcounthi;
+        u_char pad4;
+        u_char volatile vcountmid;
+        u_char pad5;
+        u_char volatile vcountlow;
+        u_char volatile syncmode;
+        u_char pad6;
+        u_char pad7;
+        u_char bas_lo;
+ };
+# define shifter ((*(volatile struct SHIFTER *)SHF_BAS))
+
+#define SHF_FBAS (0xffff820e)
+struct SHIFTER_F030
+ {
+  u_short off_next;
+  u_short scn_width;
+ };
+# define shifter_f030 ((*(volatile struct SHIFTER_F030 *)SHF_FBAS))
+
+
+#define SHF_TBAS (0xffff8200)
+struct SHIFTER_TT {
+        u_char  char_dummy0;
+        u_char  bas_hi;                 /* video mem base addr, high and mid byte */
+        u_char  char_dummy1;
+        u_char  bas_md;
+        u_char  char_dummy2;
+        u_char  vcount_hi;              /* pointer to currently displayed byte */
+        u_char  char_dummy3;
+        u_char  vcount_md;
+        u_char  char_dummy4;
+        u_char  vcount_lo;
+        u_short st_sync;                /* ST compatible sync mode register, unused */
+        u_char  char_dummy5;
+        u_char  bas_lo;                 /* video mem addr, low byte */
+        u_char  char_dummy6[2+3*16];
+        /* $ffff8240: */
+        u_short color_reg[16];  /* 16 color registers */
+        u_char  st_shiftmode;   /* ST compatible shift mode register, unused */
+        u_char  char_dummy7;
+        u_short tt_shiftmode;   /* TT shift mode register */
+
+
+};
+#define shifter_tt      ((*(volatile struct SHIFTER_TT *)SHF_TBAS))
+
+/* values for shifter_tt->tt_shiftmode */
+#define TT_SHIFTER_STLOW                0x0000
+#define TT_SHIFTER_STMID                0x0100
+#define TT_SHIFTER_STHIGH               0x0200
+#define TT_SHIFTER_TTLOW                0x0700
+#define TT_SHIFTER_TTMID                0x0400
+#define TT_SHIFTER_TTHIGH               0x0600
+#define TT_SHIFTER_MODEMASK     0x0700
+#define TT_SHIFTER_NUMMODE      0x0008
+#define TT_SHIFTER_PALETTE_MASK 0x000f
+#define TT_SHIFTER_GRAYMODE             0x1000
+
+/* 256 TT palette registers */
+#define TT_PALETTE_BASE (0xffff8400)
+#define tt_palette      ((volatile u_short *)TT_PALETTE_BASE)
+
+#define TT_PALETTE_RED_MASK             0x0f00
+#define TT_PALETTE_GREEN_MASK   0x00f0
+#define TT_PALETTE_BLUE_MASK    0x000f
+
+/*
+** Falcon030 VIDEL Video Controller
+** for description see File 'linux\tools\atari\hardware.txt
+ */
+#define f030_col ((u_long *)            0xffff9800)
+#define f030_xreg ((u_short*)           0xffff8282)
+#define f030_yreg ((u_short*)           0xffff82a2)
+#define f030_creg ((u_short*)           0xffff82c0)
+#define f030_sreg ((u_short*)           0xffff8260)
+#define f030_mreg ((u_short*)           0xffff820a)
+#define f030_linewidth ((u_short*)      0xffff820e)
+#define f030_hscroll ((u_char*)         0xffff8265)
+
+#define VIDEL_BAS (0xffff8260)
+struct VIDEL {
+        u_short st_shift;
+        u_short pad1;
+        u_char  xoffset_s;
+        u_char  xoffset;
+        u_short f_shift;
+        u_char  pad2[0x1a];
+        u_short hht;
+        u_short hbb;
+        u_short hbe;
+        u_short hdb;
+        u_short hde;
+        u_short hss;
+        u_char  pad3[0x14];
+        u_short vft;
+        u_short vbb;
+        u_short vbe;
+        u_short vdb;
+        u_short vde;
+        u_short vss;
+        u_char  pad4[0x12];
+        u_short control;
+        u_short mode;
+};
+#define videl   ((*(volatile struct VIDEL *)VIDEL_BAS))
+
+/*
+** DMA/WD1772 Disk Controller
+ */
+
+#define FWD_BAS (0xffff8604)
+struct DMA_WD
+ {
+  u_short fdc_acces_seccount;
+  u_short dma_mode_status;
+  u_char dma_vhi;       /* Some extended ST-DMAs can handle 32 bit addresses */
+  u_char dma_hi;
+  u_char char_dummy2;
+  u_char dma_md;
+  u_char char_dummy3;
+  u_char dma_lo;
+  u_short fdc_speed;
+ };
+# define dma_wd ((*(volatile struct DMA_WD *)FWD_BAS))
+/* alias */
+#define st_dma dma_wd
+/* The two highest bytes of an extended DMA as a short; this is a must
+ * for the Medusa.
+ */
+#define st_dma_ext_dmahi (*((volatile unsigned short *)0xffff8608))
+
+/*
+** YM2149 Sound Chip
+** access in bytes
+ */
+
+#define YM_BAS (0xffff8800)
+struct SOUND_YM
+ {
+  u_char rd_data_reg_sel;
+  u_char char_dummy1;
+  u_char wd_data;
+ };
+#define sound_ym ((*(volatile struct SOUND_YM *)YM_BAS))
+
+/* TT SCSI DMA */
+
+#define TT_SCSI_DMA_BAS (0xffff8700)
+struct TT_DMA {
+        u_char  char_dummy0;
+        u_char  dma_addr_hi;
+        u_char  char_dummy1;
+        u_char  dma_addr_hmd;
+        u_char  char_dummy2;
+        u_char  dma_addr_lmd;
+        u_char  char_dummy3;
+        u_char  dma_addr_lo;
+        u_char  char_dummy4;
+        u_char  dma_cnt_hi;
+        u_char  char_dummy5;
+        u_char  dma_cnt_hmd;
+        u_char  char_dummy6;
+        u_char  dma_cnt_lmd;
+        u_char  char_dummy7;
+        u_char  dma_cnt_lo;
+        u_long  dma_restdata;
+        u_short dma_ctrl;
+};
+#define tt_scsi_dma     ((*(volatile struct TT_DMA *)TT_SCSI_DMA_BAS))
+
+/* TT SCSI Controller 5380 */
+
+#define TT_5380_BAS     (0xffff8781)
+struct TT_5380 {
+        u_char  scsi_data;
+        u_char  char_dummy1;
+        u_char  scsi_icr;
+        u_char  char_dummy2;
+        u_char  scsi_mode;
+        u_char  char_dummy3;
+        u_char  scsi_tcr;
+        u_char  char_dummy4;
+        u_char  scsi_idstat;
+        u_char  char_dummy5;
+        u_char  scsi_dmastat;
+        u_char  char_dummy6;
+        u_char  scsi_targrcv;
+        u_char  char_dummy7;
+        u_char  scsi_inircv;
+};
+#define tt_scsi                 ((*(volatile struct TT_5380 *)TT_5380_BAS))
+#define tt_scsi_regp    ((volatile char *)TT_5380_BAS)
+
+
+/*
+** Falcon DMA Sound Subsystem
+ */
+
+#define MATRIX_BASE (0xffff8930)
+struct MATRIX
+{
+  u_short source;
+  u_short destination;
+  u_char external_frequency_divider;
+  u_char internal_frequency_divider;
+};
+#define falcon_matrix (*(volatile struct MATRIX *)MATRIX_BASE)
+
+#define CODEC_BASE (0xffff8936)
+struct CODEC
+{
+  u_char tracks;
+  u_char input_source;
+#define CODEC_SOURCE_ADC        1
+#define CODEC_SOURCE_MATRIX     2
+  u_char adc_source;
+#define ADC_SOURCE_RIGHT_PSG    1
+#define ADC_SOURCE_LEFT_PSG     2
+  u_char gain;
+#define CODEC_GAIN_RIGHT        0x0f
+#define CODEC_GAIN_LEFT         0xf0
+  u_char attenuation;
+#define CODEC_ATTENUATION_RIGHT 0x0f
+#define CODEC_ATTENUATION_LEFT  0xf0
+  u_char unused1;
+  u_char status;
+#define CODEC_OVERFLOW_RIGHT    1
+#define CODEC_OVERFLOW_LEFT     2
+  u_char unused2, unused3, unused4, unused5;
+  u_char gpio_directions;
+#define GPIO_IN                 0
+#define GPIO_OUT                1
+  u_char unused6;
+  u_char gpio_data;
+};
+#define falcon_codec (*(volatile struct CODEC *)CODEC_BASE)
+
+/*
+** Falcon Blitter
+*/
+
+#define BLT_BAS (0xffff8a00)
+
+struct BLITTER
+ {
+  u_short halftone[16];
+  u_short src_x_inc;
+  u_short src_y_inc;
+  u_long src_address;
+  u_short endmask1;
+  u_short endmask2;
+  u_short endmask3;
+  u_short dst_x_inc;
+  u_short dst_y_inc;
+  u_long dst_address;
+  u_short wd_per_line;
+  u_short ln_per_bb;
+  u_short hlf_op_reg;
+  u_short log_op_reg;
+  u_short lin_nm_reg;
+  u_short skew_reg;
+ };
+# define blitter ((*(volatile struct BLITTER *)BLT_BAS))
+
+
+/*
+** SCC Z8530
+ */
+
+#define SCC_BAS (0xffff8c81)
+struct SCC
+ {
+  u_char cha_a_ctrl;
+  u_char char_dummy1;
+  u_char cha_a_data;
+  u_char char_dummy2;
+  u_char cha_b_ctrl;
+  u_char char_dummy3;
+  u_char cha_b_data;
+ };
+# define scc ((*(volatile struct SCC*)SCC_BAS))
+
+/* The ESCC (Z85230) in an Atari ST. The channels are reversed! */
+# define st_escc ((*(volatile struct SCC*)0xfffffa31))
+# define st_escc_dsr ((*(volatile char *)0xfffffa39))
+
+/* TT SCC DMA Controller (same chip as SCSI DMA) */
+
+#define TT_SCC_DMA_BAS  (0xffff8c00)
+#define tt_scc_dma      ((*(volatile struct TT_DMA *)TT_SCC_DMA_BAS))
+
+/*
+** VIDEL Palette Register
+ */
+
+#define FPL_BAS (0xffff9800)
+struct VIDEL_PALETTE
+ {
+  u_long reg[256];
+ };
+# define videl_palette ((*(volatile struct VIDEL_PALETTE*)FPL_BAS))
+
+
+/*
+** Falcon DSP Host Interface
+ */
+
+#define DSP56K_HOST_INTERFACE_BASE (0xffffa200)
+struct DSP56K_HOST_INTERFACE {
+  u_char icr;
+#define DSP56K_ICR_RREQ 0x01
+#define DSP56K_ICR_TREQ 0x02
+#define DSP56K_ICR_HF0  0x08
+#define DSP56K_ICR_HF1  0x10
+#define DSP56K_ICR_HM0  0x20
+#define DSP56K_ICR_HM1  0x40
+#define DSP56K_ICR_INIT 0x80
+
+  u_char cvr;
+#define DSP56K_CVR_HV_MASK 0x1f
+#define DSP56K_CVR_HC   0x80
+
+  u_char isr;
+#define DSP56K_ISR_RXDF 0x01
+#define DSP56K_ISR_TXDE 0x02
+#define DSP56K_ISR_TRDY 0x04
+#define DSP56K_ISR_HF2  0x08
+#define DSP56K_ISR_HF3  0x10
+#define DSP56K_ISR_DMA  0x40
+#define DSP56K_ISR_HREQ 0x80
+
+  u_char ivr;
+
+  union {
+    u_char b[4];
+    u_short w[2];
+    u_long l;
+  } data;
+};
+#define dsp56k_host_interface ((*(volatile struct DSP56K_HOST_INTERFACE *)DSP56K_HOST_INTERFACE_BASE))
+
+/*
+** MFP 68901
+ */
+
+#define MFP_BAS (0xfffffa01)
+struct MFP
+ {
+  u_char par_dt_reg;
+  u_char char_dummy1;
+  u_char active_edge;
+  u_char char_dummy2;
+  u_char data_dir;
+  u_char char_dummy3;
+  u_char int_en_a;
+  u_char char_dummy4;
+  u_char int_en_b;
+  u_char char_dummy5;
+  u_char int_pn_a;
+  u_char char_dummy6;
+  u_char int_pn_b;
+  u_char char_dummy7;
+  u_char int_sv_a;
+  u_char char_dummy8;
+  u_char int_sv_b;
+  u_char char_dummy9;
+  u_char int_mk_a;
+  u_char char_dummy10;
+  u_char int_mk_b;
+  u_char char_dummy11;
+  u_char vec_adr;
+  u_char char_dummy12;
+  u_char tim_ct_a;
+  u_char char_dummy13;
+  u_char tim_ct_b;
+  u_char char_dummy14;
+  u_char tim_ct_cd;
+  u_char char_dummy15;
+  u_char tim_dt_a;
+  u_char char_dummy16;
+  u_char tim_dt_b;
+  u_char char_dummy17;
+  u_char tim_dt_c;
+  u_char char_dummy18;
+  u_char tim_dt_d;
+  u_char char_dummy19;
+  u_char sync_char;
+  u_char char_dummy20;
+  u_char usart_ctr;
+  u_char char_dummy21;
+  u_char rcv_stat;
+  u_char char_dummy22;
+  u_char trn_stat;
+  u_char char_dummy23;
+  u_char usart_dta;
+ };
+# define mfp ((*(volatile struct MFP*)MFP_BAS))
+
+/* TT's second MFP */
+
+#define TT_MFP_BAS      (0xfffffa81)
+# define tt_mfp ((*(volatile struct MFP*)TT_MFP_BAS))
+
+
+/* TT System Control Unit */
+
+#define TT_SCU_BAS      (0xffff8e01)
+struct TT_SCU {
+        u_char  sys_mask;
+        u_char  char_dummy1;
+        u_char  sys_stat;
+        u_char  char_dummy2;
+        u_char  softint;
+        u_char  char_dummy3;
+        u_char  vmeint;
+        u_char  char_dummy4;
+        u_char  gp_reg1;
+        u_char  char_dummy5;
+        u_char  gp_reg2;
+        u_char  char_dummy6;
+        u_char  vme_mask;
+        u_char  char_dummy7;
+        u_char  vme_stat;
+};
+#define tt_scu  ((*(volatile struct TT_SCU *)TT_SCU_BAS))
+
+/* TT real time clock */
+
+#define TT_RTC_BAS      (0xffff8961)
+struct TT_RTC {
+        u_char  regsel;
+        u_char  dummy;
+        u_char  data;
+};
+#define tt_rtc  ((*(volatile struct TT_RTC *)TT_RTC_BAS))
+
+
+/*
+** ACIA 6850
+ */
+/* constants for the ACIA registers */
+
+/* baudrate selection and reset (Baudrate = clock/factor) */
+#define ACIA_DIV1  0
+#define ACIA_DIV16 1
+#define ACIA_DIV64 2
+#define ACIA_RESET 3
+
+/* character format */
+#define ACIA_D7E2S (0<<2)       /* 7 data, even parity, 2 stop */
+#define ACIA_D7O2S (1<<2)       /* 7 data, odd parity, 2 stop */
+#define ACIA_D7E1S (2<<2)       /* 7 data, even parity, 1 stop */
+#define ACIA_D7O1S (3<<2)       /* 7 data, odd parity, 1 stop */
+#define ACIA_D8N2S (4<<2)       /* 8 data, no parity, 2 stop */
+#define ACIA_D8N1S (5<<2)       /* 8 data, no parity, 1 stop */
+#define ACIA_D8E1S (6<<2)       /* 8 data, even parity, 1 stop */
+#define ACIA_D8O1S (7<<2)       /* 8 data, odd parity, 1 stop */
+
+/* transmit control */
+#define ACIA_RLTID (0<<5)       /* RTS low, TxINT disabled */
+#define ACIA_RLTIE (1<<5)       /* RTS low, TxINT enabled */
+#define ACIA_RHTID (2<<5)       /* RTS high, TxINT disabled */
+#define ACIA_RLTIDSB (3<<5)     /* RTS low, TxINT disabled, send break */
+
+/* receive control */
+#define ACIA_RID (0<<7)         /* RxINT disabled */
+#define ACIA_RIE (1<<7)         /* RxINT enabled */
+
+/* status fields of the ACIA */
+#define ACIA_RDRF 1             /* Receive Data Register Full */
+#define ACIA_TDRE (1<<1)        /* Transmit Data Register Empty */
+#define ACIA_DCD  (1<<2)        /* Data Carrier Detect */
+#define ACIA_CTS  (1<<3)        /* Clear To Send */
+#define ACIA_FE   (1<<4)        /* Framing Error */
+#define ACIA_OVRN (1<<5)        /* Receiver Overrun */
+#define ACIA_PE   (1<<6)        /* Parity Error */
+#define ACIA_IRQ  (1<<7)        /* Interrupt Request */
+
+#define ACIA_BAS (0xfffffc00)
+struct ACIA
+ {
+  u_char key_ctrl;
+  u_char char_dummy1;
+  u_char key_data;
+  u_char char_dummy2;
+  u_char mid_ctrl;
+  u_char char_dummy3;
+  u_char mid_data;
+ };
+# define acia ((*(volatile struct ACIA*)ACIA_BAS))
+
+#define TT_DMASND_BAS (0xffff8900)
+struct TT_DMASND {
+        u_char  int_ctrl;       /* Falcon: Interrupt control */
+        u_char  ctrl;
+        u_char  pad2;
+        u_char  bas_hi;
+        u_char  pad3;
+        u_char  bas_mid;
+        u_char  pad4;
+        u_char  bas_low;
+        u_char  pad5;
+        u_char  addr_hi;
+        u_char  pad6;
+        u_char  addr_mid;
+        u_char  pad7;
+        u_char  addr_low;
+        u_char  pad8;
+        u_char  end_hi;
+        u_char  pad9;
+        u_char  end_mid;
+        u_char  pad10;
+        u_char  end_low;
+        u_char  pad11[12];
+        u_char  track_select;   /* Falcon */
+        u_char  mode;
+        u_char  pad12[14];
+        /* Falcon only: */
+        u_short cbar_src;
+        u_short cbar_dst;
+        u_char  ext_div;
+        u_char  int_div;
+        u_char  rec_track_select;
+        u_char  dac_src;
+        u_char  adc_src;
+        u_char  input_gain;
+        u_short output_atten;
+};
+# define tt_dmasnd ((*(volatile struct TT_DMASND *)TT_DMASND_BAS))
+
+#define DMASND_MFP_INT_REPLAY     0x01
+#define DMASND_MFP_INT_RECORD     0x02
+#define DMASND_TIMERA_INT_REPLAY  0x04
+#define DMASND_TIMERA_INT_RECORD  0x08
+
+#define DMASND_CTRL_OFF           0x00
+#define DMASND_CTRL_ON            0x01
+#define DMASND_CTRL_REPEAT        0x02
+#define DMASND_CTRL_RECORD_ON     0x10
+#define DMASND_CTRL_RECORD_OFF    0x00
+#define DMASND_CTRL_RECORD_REPEAT 0x20
+#define DMASND_CTRL_SELECT_REPLAY 0x00
+#define DMASND_CTRL_SELECT_RECORD 0x80
+#define DMASND_MODE_MONO          0x80
+#define DMASND_MODE_STEREO        0x00
+#define DMASND_MODE_8BIT          0x00
+#define DMASND_MODE_16BIT         0x40  /* Falcon only */
+#define DMASND_MODE_6KHZ          0x00  /* Falcon: mute */
+#define DMASND_MODE_12KHZ         0x01
+#define DMASND_MODE_25KHZ         0x02
+#define DMASND_MODE_50KHZ         0x03
+
+
+#define DMASNDSetBase(bufstart)                                         \
+    do {                                                                \
+        tt_dmasnd.bas_hi  = (unsigned char)(((bufstart) & 0xff0000) >> 16); \
+        tt_dmasnd.bas_mid = (unsigned char)(((bufstart) & 0x00ff00) >> 8); \
+        tt_dmasnd.bas_low = (unsigned char) ((bufstart) & 0x0000ff); \
+    } while( 0 )
+
+#define DMASNDGetAdr() ((tt_dmasnd.addr_hi << 16) +     \
+                        (tt_dmasnd.addr_mid << 8) +     \
+                        (tt_dmasnd.addr_low))
+
+#define DMASNDSetEnd(bufend)                            \
+    do {                                                \
+        tt_dmasnd.end_hi  = (unsigned char)(((bufend) & 0xff0000) >> 16); \
+        tt_dmasnd.end_mid = (unsigned char)(((bufend) & 0x00ff00) >> 8); \
+        tt_dmasnd.end_low = (unsigned char) ((bufend) & 0x0000ff); \
+    } while( 0 )
+
+
+#define TT_MICROWIRE_BAS        (0xffff8922)
+struct TT_MICROWIRE {
+        u_short data;
+        u_short mask;
+};
+# define tt_microwire ((*(volatile struct TT_MICROWIRE *)TT_MICROWIRE_BAS))
+
+#define MW_LM1992_ADDR          0x0400
+
+#define MW_LM1992_VOLUME(dB)    \
+    (0x0c0 | ((dB) < -80 ? 0 : (dB) > 0 ? 40 : (((dB) + 80) / 2)))
+#define MW_LM1992_BALLEFT(dB)   \
+    (0x140 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
+#define MW_LM1992_BALRIGHT(dB)  \
+    (0x100 | ((dB) < -40 ? 0 : (dB) > 0 ? 20 : (((dB) + 40) / 2)))
+#define MW_LM1992_TREBLE(dB)    \
+    (0x080 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
+#define MW_LM1992_BASS(dB)      \
+    (0x040 | ((dB) < -12 ? 0 : (dB) > 12 ? 12 : (((dB) / 2) + 6)))
+
+#define MW_LM1992_PSG_LOW       0x000
+#define MW_LM1992_PSG_HIGH      0x001
+#define MW_LM1992_PSG_OFF       0x002
+
+#define MSTE_RTC_BAS    (0xfffffc21)
+
+struct MSTE_RTC {
+        u_char sec_ones;
+        u_char dummy1;
+        u_char sec_tens;
+        u_char dummy2;
+        u_char min_ones;
+        u_char dummy3;
+        u_char min_tens;
+        u_char dummy4;
+        u_char hr_ones;
+        u_char dummy5;
+        u_char hr_tens;
+        u_char dummy6;
+        u_char weekday;
+        u_char dummy7;
+        u_char day_ones;
+        u_char dummy8;
+        u_char day_tens;
+        u_char dummy9;
+        u_char mon_ones;
+        u_char dummy10;
+        u_char mon_tens;
+        u_char dummy11;
+        u_char year_ones;
+        u_char dummy12;
+        u_char year_tens;
+        u_char dummy13;
+        u_char mode;
+        u_char dummy14;
+        u_char test;
+        u_char dummy15;
+        u_char reset;
+};
+
+#define mste_rtc ((*(volatile struct MSTE_RTC *)MSTE_RTC_BAS))
+
+#endif /* linux/atarihw.h */
+
diff --git a/arch/m68k/include/asm/atariints.h b/arch/m68k/include/asm/atariints.h
new file mode 100644
index 000000000000..5748e99f4e26
--- /dev/null
+++ b/arch/m68k/include/asm/atariints.h
@@ -0,0 +1,204 @@
+/*
+** atariints.h -- Atari Linux interrupt handling structs and prototypes
+**
+** Copyright 1994 by Björn Brauel
+**
+** 5/2/94 Roman Hodek:
+**   TT interrupt definitions added.
+**
+** 12/02/96: (Roman)
+**   Adapted to new int handling scheme (see ataints.c); revised numbering
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _LINUX_ATARIINTS_H_
+#define _LINUX_ATARIINTS_H_
+
+#include <asm/irq.h>
+#include <asm/atarihw.h>
+
+/*
+** Atari Interrupt sources.
+**
+*/
+
+#define STMFP_SOURCE_BASE  8
+#define TTMFP_SOURCE_BASE  24
+#define SCC_SOURCE_BASE    40
+#define VME_SOURCE_BASE    56
+#define VME_MAX_SOURCES    16
+
+#define NUM_ATARI_SOURCES   (VME_SOURCE_BASE+VME_MAX_SOURCES-STMFP_SOURCE_BASE)
+
+/* convert vector number to int source number */
+#define IRQ_VECTOR_TO_SOURCE(v) ((v) - ((v) < 0x20 ? 0x18 : (0x40-8)))
+
+/* convert irq_handler index to vector number */
+#define IRQ_SOURCE_TO_VECTOR(i) ((i) + ((i) < 8 ? 0x18 : (0x40-8)))
+
+/* interrupt service types */
+#define IRQ_TYPE_SLOW     0
+#define IRQ_TYPE_FAST     1
+#define IRQ_TYPE_PRIO     2
+
+/* ST-MFP interrupts */
+#define IRQ_MFP_BUSY      (8)
+#define IRQ_MFP_DCD       (9)
+#define IRQ_MFP_CTS       (10)
+#define IRQ_MFP_GPU       (11)
+#define IRQ_MFP_TIMD      (12)
+#define IRQ_MFP_TIMC      (13)
+#define IRQ_MFP_ACIA      (14)
+#define IRQ_MFP_FDC       (15)
+#define IRQ_MFP_ACSI      IRQ_MFP_FDC
+#define IRQ_MFP_FSCSI     IRQ_MFP_FDC
+#define IRQ_MFP_IDE       IRQ_MFP_FDC
+#define IRQ_MFP_TIMB      (16)
+#define IRQ_MFP_SERERR    (17)
+#define IRQ_MFP_SEREMPT   (18)
+#define IRQ_MFP_RECERR    (19)
+#define IRQ_MFP_RECFULL   (20)
+#define IRQ_MFP_TIMA      (21)
+#define IRQ_MFP_RI        (22)
+#define IRQ_MFP_MMD       (23)
+
+/* TT-MFP interrupts */
+#define IRQ_TT_MFP_IO0       (24)
+#define IRQ_TT_MFP_IO1       (25)
+#define IRQ_TT_MFP_SCC       (26)
+#define IRQ_TT_MFP_RI        (27)
+#define IRQ_TT_MFP_TIMD      (28)
+#define IRQ_TT_MFP_TIMC      (29)
+#define IRQ_TT_MFP_DRVRDY    (30)
+#define IRQ_TT_MFP_SCSIDMA   (31)
+#define IRQ_TT_MFP_TIMB      (32)
+#define IRQ_TT_MFP_SERERR    (33)
+#define IRQ_TT_MFP_SEREMPT   (34)
+#define IRQ_TT_MFP_RECERR    (35)
+#define IRQ_TT_MFP_RECFULL   (36)
+#define IRQ_TT_MFP_TIMA      (37)
+#define IRQ_TT_MFP_RTC       (38)
+#define IRQ_TT_MFP_SCSI      (39)
+
+/* SCC interrupts */
+#define IRQ_SCCB_TX          (40)
+#define IRQ_SCCB_STAT        (42)
+#define IRQ_SCCB_RX          (44)
+#define IRQ_SCCB_SPCOND      (46)
+#define IRQ_SCCA_TX          (48)
+#define IRQ_SCCA_STAT        (50)
+#define IRQ_SCCA_RX          (52)
+#define IRQ_SCCA_SPCOND      (54)
+
+
+#define INT_CLK   24576     /* CLK while int_clk =2.456MHz and divide = 100 */
+#define INT_TICKS 246       /* to make sched_time = 99.902... HZ */
+
+
+#define MFP_ENABLE      0
+#define MFP_PENDING     1
+#define MFP_SERVICE     2
+#define MFP_MASK        3
+
+/* Utility functions for setting/clearing bits in the interrupt registers of
+ * the MFP. 'type' should be constant, if 'irq' is constant, too, code size is
+ * reduced. set_mfp_bit() is nonsense for PENDING and SERVICE registers. */
+
+static inline int get_mfp_bit( unsigned irq, int type )
+
+{       unsigned char   mask, *reg;
+
+        mask = 1 << (irq & 7);
+        reg = (unsigned char *)&mfp.int_en_a + type*4 +
+                  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+        return( *reg & mask );
+}
+
+static inline void set_mfp_bit( unsigned irq, int type )
+
+{       unsigned char   mask, *reg;
+
+        mask = 1 << (irq & 7);
+        reg = (unsigned char *)&mfp.int_en_a + type*4 +
+                  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+        __asm__ __volatile__ ( "orb %0,%1"
+                              : : "di" (mask), "m" (*reg) : "memory" );
+}
+
+static inline void clear_mfp_bit( unsigned irq, int type )
+
+{       unsigned char   mask, *reg;
+
+        mask = ~(1 << (irq & 7));
+        reg = (unsigned char *)&mfp.int_en_a + type*4 +
+                  ((irq & 8) >> 2) + (((irq-8) & 16) << 3);
+        if (type == MFP_PENDING || type == MFP_SERVICE)
+                __asm__ __volatile__ ( "moveb %0,%1"
+                                      : : "di" (mask), "m" (*reg) : "memory" );
+        else
+                __asm__ __volatile__ ( "andb %0,%1"
+                                      : : "di" (mask), "m" (*reg) : "memory" );
+}
+
+/*
+ * {en,dis}able_irq have the usual semantics of temporary blocking the
+ * interrupt, but not loosing requests that happen between disabling and
+ * enabling. This is done with the MFP mask registers.
+ */
+
+static inline void atari_enable_irq( unsigned irq )
+
+{
+        if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+        set_mfp_bit( irq, MFP_MASK );
+}
+
+static inline void atari_disable_irq( unsigned irq )
+
+{
+        if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+        clear_mfp_bit( irq, MFP_MASK );
+}
+
+/*
+ * In opposite to {en,dis}able_irq, requests between turn{off,on}_irq are not
+ * "stored"
+ */
+
+static inline void atari_turnon_irq( unsigned irq )
+
+{
+        if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+        set_mfp_bit( irq, MFP_ENABLE );
+}
+
+static inline void atari_turnoff_irq( unsigned irq )
+
+{
+        if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+        clear_mfp_bit( irq, MFP_ENABLE );
+        clear_mfp_bit( irq, MFP_PENDING );
+}
+
+static inline void atari_clear_pending_irq( unsigned irq )
+
+{
+        if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return;
+        clear_mfp_bit( irq, MFP_PENDING );
+}
+
+static inline int atari_irq_pending( unsigned irq )
+
+{
+        if (irq < STMFP_SOURCE_BASE || irq >= SCC_SOURCE_BASE) return( 0 );
+        return( get_mfp_bit( irq, MFP_PENDING ) );
+}
+
+unsigned long atari_register_vme_int( void );
+void atari_unregister_vme_int( unsigned long );
+
+#endif /* linux/atariints.h */
diff --git a/arch/m68k/include/asm/atarikb.h b/arch/m68k/include/asm/atarikb.h
new file mode 100644
index 000000000000..546e7da5804f
--- /dev/null
+++ b/arch/m68k/include/asm/atarikb.h
@@ -0,0 +1,46 @@
+/*
+** atarikb.h -- This header contains the prototypes of functions of
+**              the intelligent keyboard of the Atari needed by the
+**              mouse and joystick drivers.
+**
+** Copyright 1994 by Robert de Vries
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created: 20 Feb 1994 by Robert de Vries
+*/
+
+#ifndef _LINUX_ATARIKB_H
+#define _LINUX_ATARIKB_H
+
+void ikbd_write(const char *, int);
+void ikbd_mouse_button_action(int mode);
+void ikbd_mouse_rel_pos(void);
+void ikbd_mouse_abs_pos(int xmax, int ymax);
+void ikbd_mouse_kbd_mode(int dx, int dy);
+void ikbd_mouse_thresh(int x, int y);
+void ikbd_mouse_scale(int x, int y);
+void ikbd_mouse_pos_get(int *x, int *y);
+void ikbd_mouse_pos_set(int x, int y);
+void ikbd_mouse_y0_bot(void);
+void ikbd_mouse_y0_top(void);
+void ikbd_mouse_disable(void);
+void ikbd_joystick_event_on(void);
+void ikbd_joystick_event_off(void);
+void ikbd_joystick_get_state(void);
+void ikbd_joystick_disable(void);
+
+/* Hook for MIDI serial driver */
+extern void (*atari_MIDI_interrupt_hook) (void);
+/* Hook for mouse driver */
+extern void (*atari_mouse_interrupt_hook) (char *);
+/* Hook for keyboard inputdev  driver */
+extern void (*atari_input_keyboard_interrupt_hook) (unsigned char, char);
+/* Hook for mouse inputdev  driver */
+extern void (*atari_input_mouse_interrupt_hook) (char *);
+
+int atari_keyb_init(void);
+
+#endif /* _LINUX_ATARIKB_H */
diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h
new file mode 100644
index 000000000000..8d29145ebb27
--- /dev/null
+++ b/arch/m68k/include/asm/atomic.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "atomic_no.h"
+#else
+#include "atomic_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/atomic_mm.h b/arch/m68k/include/asm/atomic_mm.h
new file mode 100644
index 000000000000..eb0ab9d4ee77
--- /dev/null
+++ b/arch/m68k/include/asm/atomic_mm.h
@@ -0,0 +1,196 @@
+#ifndef __ARCH_M68K_ATOMIC__
+#define __ARCH_M68K_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+#define ATOMIC_INIT(i)  { (i) }
+
+#define atomic_read(v)          ((v)->counter)
+#define atomic_set(v, i)        (((v)->counter) = i)
+
+static inline void atomic_add(int i, atomic_t *v)
+{
+        __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "id" (i));
+}
+
+static inline void atomic_sub(int i, atomic_t *v)
+{
+        __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "id" (i));
+}
+
+static inline void atomic_inc(atomic_t *v)
+{
+        __asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+static inline void atomic_dec(atomic_t *v)
+{
+        __asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static inline int atomic_dec_and_test(atomic_t *v)
+{
+        char c;
+        __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+        return c != 0;
+}
+
+static inline int atomic_inc_and_test(atomic_t *v)
+{
+        char c;
+        __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+        return c != 0;
+}
+
+#ifdef CONFIG_RMW_INSNS
+
+static inline int atomic_add_return(int i, atomic_t *v)
+{
+        int t, tmp;
+
+        __asm__ __volatile__(
+                        "1:     movel %2,%1\n"
+                        "       addl %3,%1\n"
+                        "       casl %2,%1,%0\n"
+                        "       jne 1b"
+                        : "+m" (*v), "=&d" (t), "=&d" (tmp)
+                        : "g" (i), "2" (atomic_read(v)));
+        return t;
+}
+
+static inline int atomic_sub_return(int i, atomic_t *v)
+{
+        int t, tmp;
+
+        __asm__ __volatile__(
+                        "1:     movel %2,%1\n"
+                        "       subl %3,%1\n"
+                        "       casl %2,%1,%0\n"
+                        "       jne 1b"
+                        : "+m" (*v), "=&d" (t), "=&d" (tmp)
+                        : "g" (i), "2" (atomic_read(v)));
+        return t;
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+#else /* !CONFIG_RMW_INSNS */
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+        unsigned long flags;
+        int t;
+
+        local_irq_save(flags);
+        t = atomic_read(v);
+        t += i;
+        atomic_set(v, t);
+        local_irq_restore(flags);
+
+        return t;
+}
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+        unsigned long flags;
+        int t;
+
+        local_irq_save(flags);
+        t = atomic_read(v);
+        t -= i;
+        atomic_set(v, t);
+        local_irq_restore(flags);
+
+        return t;
+}
+
+static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
+{
+        unsigned long flags;
+        int prev;
+
+        local_irq_save(flags);
+        prev = atomic_read(v);
+        if (prev == old)
+                atomic_set(v, new);
+        local_irq_restore(flags);
+        return prev;
+}
+
+static inline int atomic_xchg(atomic_t *v, int new)
+{
+        unsigned long flags;
+        int prev;
+
+        local_irq_save(flags);
+        prev = atomic_read(v);
+        atomic_set(v, new);
+        local_irq_restore(flags);
+        return prev;
+}
+
+#endif /* !CONFIG_RMW_INSNS */
+
+#define atomic_dec_return(v)    atomic_sub_return(1, (v))
+#define atomic_inc_return(v)    atomic_add_return(1, (v))
+
+static inline int atomic_sub_and_test(int i, atomic_t *v)
+{
+        char c;
+        __asm__ __volatile__("subl %2,%1; seq %0" : "=d" (c), "+m" (*v): "g" (i));
+        return c != 0;
+}
+
+static inline int atomic_add_negative(int i, atomic_t *v)
+{
+        char c;
+        __asm__ __volatile__("addl %2,%1; smi %0" : "=d" (c), "+m" (*v): "g" (i));
+        return c != 0;
+}
+
+static inline void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+        __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static inline void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+        __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+        int c, old;
+        c = atomic_read(v);
+        for (;;) {
+                if (unlikely(c == (u)))
+                        break;
+                old = atomic_cmpxchg((v), c, c + (a));
+                if (likely(old == c))
+                        break;
+                c = old;
+        }
+        return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()     barrier()
+#define smp_mb__after_atomic_dec()      barrier()
+#define smp_mb__before_atomic_inc()     barrier()
+#define smp_mb__after_atomic_inc()      barrier()
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_M68K_ATOMIC __ */
diff --git a/arch/m68k/include/asm/atomic_no.h b/arch/m68k/include/asm/atomic_no.h
new file mode 100644
index 000000000000..6bb674855a3f
--- /dev/null
+++ b/arch/m68k/include/asm/atomic_no.h
@@ -0,0 +1,155 @@
+#ifndef __ARCH_M68KNOMMU_ATOMIC__
+#define __ARCH_M68KNOMMU_ATOMIC__
+
+#include <linux/types.h>
+#include <asm/system.h>
+
+/*
+ * Atomic operations that C can't guarantee us.  Useful for
+ * resource counting etc..
+ */
+
+/*
+ * We do not have SMP m68k systems, so we don't have to deal with that.
+ */
+
+#define ATOMIC_INIT(i)  { (i) }
+
+#define atomic_read(v)          ((v)->counter)
+#define atomic_set(v, i)        (((v)->counter) = i)
+
+static __inline__ void atomic_add(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "d" (i));
+#else
+        __asm__ __volatile__("addl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ void atomic_sub(int i, atomic_t *v)
+{
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "d" (i));
+#else
+        __asm__ __volatile__("subl %1,%0" : "+m" (*v) : "di" (i));
+#endif
+}
+
+static __inline__ int atomic_sub_and_test(int i, atomic_t * v)
+{
+        char c;
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__("subl %2,%1; seq %0"
+                             : "=d" (c), "+m" (*v)
+                             : "d" (i));
+#else
+        __asm__ __volatile__("subl %2,%1; seq %0"
+                             : "=d" (c), "+m" (*v)
+                             : "di" (i));
+#endif
+        return c != 0;
+}
+
+static __inline__ void atomic_inc(volatile atomic_t *v)
+{
+        __asm__ __volatile__("addql #1,%0" : "+m" (*v));
+}
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+
+static __inline__ int atomic_inc_and_test(volatile atomic_t *v)
+{
+        char c;
+        __asm__ __volatile__("addql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+        return c != 0;
+}
+
+static __inline__ void atomic_dec(volatile atomic_t *v)
+{
+        __asm__ __volatile__("subql #1,%0" : "+m" (*v));
+}
+
+static __inline__ int atomic_dec_and_test(volatile atomic_t *v)
+{
+        char c;
+        __asm__ __volatile__("subql #1,%1; seq %0" : "=d" (c), "+m" (*v));
+        return c != 0;
+}
+
+static __inline__ void atomic_clear_mask(unsigned long mask, unsigned long *v)
+{
+        __asm__ __volatile__("andl %1,%0" : "+m" (*v) : "id" (~(mask)));
+}
+
+static __inline__ void atomic_set_mask(unsigned long mask, unsigned long *v)
+{
+        __asm__ __volatile__("orl %1,%0" : "+m" (*v) : "id" (mask));
+}
+
+/* Atomic operations are already serializing */
+#define smp_mb__before_atomic_dec()    barrier()
+#define smp_mb__after_atomic_dec() barrier()
+#define smp_mb__before_atomic_inc()    barrier()
+#define smp_mb__after_atomic_inc() barrier()
+
+static inline int atomic_add_return(int i, atomic_t * v)
+{
+        unsigned long temp, flags;
+
+        local_irq_save(flags);
+        temp = *(long *)v;
+        temp += i;
+        *(long *)v = temp;
+        local_irq_restore(flags);
+
+        return temp;
+}
+
+#define atomic_add_negative(a, v)       (atomic_add_return((a), (v)) < 0)
+
+static inline int atomic_sub_return(int i, atomic_t * v)
+{
+        unsigned long temp, flags;
+
+        local_irq_save(flags);
+        temp = *(long *)v;
+        temp -= i;
+        *(long *)v = temp;
+        local_irq_restore(flags);
+
+        return temp;
+}
+
+#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
+#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+
+static __inline__ int atomic_add_unless(atomic_t *v, int a, int u)
+{
+        int c, old;
+        c = atomic_read(v);
+        for (;;) {
+                if (unlikely(c == (u)))
+                        break;
+                old = atomic_cmpxchg((v), c, c + (a));
+                if (likely(old == c))
+                        break;
+                c = old;
+        }
+        return c != (u);
+}
+
+#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
+
+#define atomic_dec_return(v) atomic_sub_return(1,(v))
+#define atomic_inc_return(v) atomic_add_return(1,(v))
+
+#include <asm-generic/atomic.h>
+#endif /* __ARCH_M68KNOMMU_ATOMIC __ */
diff --git a/arch/m68k/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h
new file mode 100644
index 000000000000..844d6d52204b
--- /dev/null
+++ b/arch/m68k/include/asm/auxvec.h
@@ -0,0 +1,4 @@
+#ifndef __ASMm68k_AUXVEC_H
+#define __ASMm68k_AUXVEC_H
+
+#endif
diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h
new file mode 100644
index 000000000000..ce163abddaba
--- /dev/null
+++ b/arch/m68k/include/asm/bitops.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bitops_no.h"
+#else
+#include "bitops_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h
new file mode 100644
index 000000000000..9bde784e7bad
--- /dev/null
+++ b/arch/m68k/include/asm/bitops_mm.h
@@ -0,0 +1,464 @@
+#ifndef _M68K_BITOPS_H
+#define _M68K_BITOPS_H
+/*
+ * Copyright 1992, Linus Torvalds.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#include <linux/compiler.h>
+
+/*
+ * Require 68020 or better.
+ *
+ * They use the standard big-endian m680x0 bit ordering.
+ */
+
+#define test_and_set_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_test_and_set_bit(nr, vaddr) : \
+   __generic_test_and_set_bit(nr, vaddr))
+
+#define __test_and_set_bit(nr,vaddr) test_and_set_bit(nr,vaddr)
+
+static inline int __constant_test_and_set_bit(int nr, unsigned long *vaddr)
+{
+        char *p = (char *)vaddr + (nr ^ 31) / 8;
+        char retval;
+
+        __asm__ __volatile__ ("bset %2,%1; sne %0"
+                        : "=d" (retval), "+m" (*p)
+                        : "di" (nr & 7));
+
+        return retval;
+}
+
+static inline int __generic_test_and_set_bit(int nr, unsigned long *vaddr)
+{
+        char retval;
+
+        __asm__ __volatile__ ("bfset %2{%1:#1}; sne %0"
+                        : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+        return retval;
+}
+
+#define set_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_set_bit(nr, vaddr) : \
+   __generic_set_bit(nr, vaddr))
+
+#define __set_bit(nr,vaddr) set_bit(nr,vaddr)
+
+static inline void __constant_set_bit(int nr, volatile unsigned long *vaddr)
+{
+        char *p = (char *)vaddr + (nr ^ 31) / 8;
+        __asm__ __volatile__ ("bset %1,%0"
+                        : "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_set_bit(int nr, volatile unsigned long *vaddr)
+{
+        __asm__ __volatile__ ("bfset %1{%0:#1}"
+                        : : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+#define test_and_clear_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_test_and_clear_bit(nr, vaddr) : \
+   __generic_test_and_clear_bit(nr, vaddr))
+
+#define __test_and_clear_bit(nr,vaddr) test_and_clear_bit(nr,vaddr)
+
+static inline int __constant_test_and_clear_bit(int nr, unsigned long *vaddr)
+{
+        char *p = (char *)vaddr + (nr ^ 31) / 8;
+        char retval;
+
+        __asm__ __volatile__ ("bclr %2,%1; sne %0"
+                        : "=d" (retval), "+m" (*p)
+                        : "di" (nr & 7));
+
+        return retval;
+}
+
+static inline int __generic_test_and_clear_bit(int nr, unsigned long *vaddr)
+{
+        char retval;
+
+        __asm__ __volatile__ ("bfclr %2{%1:#1}; sne %0"
+                        : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+        return retval;
+}
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+
+#define clear_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_clear_bit(nr, vaddr) : \
+   __generic_clear_bit(nr, vaddr))
+#define __clear_bit(nr,vaddr) clear_bit(nr,vaddr)
+
+static inline void __constant_clear_bit(int nr, volatile unsigned long *vaddr)
+{
+        char *p = (char *)vaddr + (nr ^ 31) / 8;
+        __asm__ __volatile__ ("bclr %1,%0"
+                        : "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_clear_bit(int nr, volatile unsigned long *vaddr)
+{
+        __asm__ __volatile__ ("bfclr %1{%0:#1}"
+                        : : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+#define test_and_change_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_test_and_change_bit(nr, vaddr) : \
+   __generic_test_and_change_bit(nr, vaddr))
+
+#define __test_and_change_bit(nr,vaddr) test_and_change_bit(nr,vaddr)
+#define __change_bit(nr,vaddr) change_bit(nr,vaddr)
+
+static inline int __constant_test_and_change_bit(int nr, unsigned long *vaddr)
+{
+        char *p = (char *)vaddr + (nr ^ 31) / 8;
+        char retval;
+
+        __asm__ __volatile__ ("bchg %2,%1; sne %0"
+                        : "=d" (retval), "+m" (*p)
+                        : "di" (nr & 7));
+
+        return retval;
+}
+
+static inline int __generic_test_and_change_bit(int nr, unsigned long *vaddr)
+{
+        char retval;
+
+        __asm__ __volatile__ ("bfchg %2{%1:#1}; sne %0"
+                        : "=d" (retval) : "d" (nr^31), "o" (*vaddr) : "memory");
+
+        return retval;
+}
+
+#define change_bit(nr,vaddr) \
+  (__builtin_constant_p(nr) ? \
+   __constant_change_bit(nr, vaddr) : \
+   __generic_change_bit(nr, vaddr))
+
+static inline void __constant_change_bit(int nr, unsigned long *vaddr)
+{
+        char *p = (char *)vaddr + (nr ^ 31) / 8;
+        __asm__ __volatile__ ("bchg %1,%0"
+                        : "+m" (*p) : "di" (nr & 7));
+}
+
+static inline void __generic_change_bit(int nr, unsigned long *vaddr)
+{
+        __asm__ __volatile__ ("bfchg %1{%0:#1}"
+                        : : "d" (nr^31), "o" (*vaddr) : "memory");
+}
+
+static inline int test_bit(int nr, const unsigned long *vaddr)
+{
+        return (vaddr[nr >> 5] & (1UL << (nr & 31))) != 0;
+}
+
+static inline int find_first_zero_bit(const unsigned long *vaddr,
+                                      unsigned size)
+{
+        const unsigned long *p = vaddr;
+        int res = 32;
+        unsigned long num;
+
+        if (!size)
+                return 0;
+
+        size = (size + 31) >> 5;
+        while (!(num = ~*p++)) {
+                if (!--size)
+                        goto out;
+        }
+
+        __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+                              : "=d" (res) : "d" (num & -num));
+        res ^= 31;
+out:
+        return ((long)p - (long)vaddr - 4) * 8 + res;
+}
+
+static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
+                                     int offset)
+{
+        const unsigned long *p = vaddr + (offset >> 5);
+        int bit = offset & 31UL, res;
+
+        if (offset >= size)
+                return size;
+
+        if (bit) {
+                unsigned long num = ~*p++ & (~0UL << bit);
+                offset -= bit;
+
+                /* Look for zero in first longword */
+                __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+                                      : "=d" (res) : "d" (num & -num));
+                if (res < 32)
+                        return offset + (res ^ 31);
+                offset += 32;
+        }
+        /* No zero yet, search remaining full bytes for a zero */
+        res = find_first_zero_bit(p, size - ((long)p - (long)vaddr) * 8);
+        return offset + res;
+}
+
+static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
+{
+        const unsigned long *p = vaddr;
+        int res = 32;
+        unsigned long num;
+
+        if (!size)
+                return 0;
+
+        size = (size + 31) >> 5;
+        while (!(num = *p++)) {
+                if (!--size)
+                        goto out;
+        }
+
+        __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+                              : "=d" (res) : "d" (num & -num));
+        res ^= 31;
+out:
+        return ((long)p - (long)vaddr - 4) * 8 + res;
+}
+
+static inline int find_next_bit(const unsigned long *vaddr, int size,
+                                int offset)
+{
+        const unsigned long *p = vaddr + (offset >> 5);
+        int bit = offset & 31UL, res;
+
+        if (offset >= size)
+                return size;
+
+        if (bit) {
+                unsigned long num = *p++ & (~0UL << bit);
+                offset -= bit;
+
+                /* Look for one in first longword */
+                __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+                                      : "=d" (res) : "d" (num & -num));
+                if (res < 32)
+                        return offset + (res ^ 31);
+                offset += 32;
+        }
+        /* No one yet, search remaining full bytes for a one */
+        res = find_first_bit(p, size - ((long)p - (long)vaddr) * 8);
+        return offset + res;
+}
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+static inline unsigned long ffz(unsigned long word)
+{
+        int res;
+
+        __asm__ __volatile__ ("bfffo %1{#0,#0},%0"
+                              : "=d" (res) : "d" (~word & -~word));
+        return res ^ 31;
+}
+
+#ifdef __KERNEL__
+
+/*
+ * ffs: find first bit set. This is defined the same way as
+ * the libc and compiler builtin ffs routines, therefore
+ * differs in spirit from the above ffz (man ffs).
+ */
+
+static inline int ffs(int x)
+{
+        int cnt;
+
+        asm ("bfffo %1{#0:#0},%0" : "=d" (cnt) : "dm" (x & -x));
+
+        return 32 - cnt;
+}
+#define __ffs(x) (ffs(x) - 1)
+
+/*
+ * fls: find last bit set.
+ */
+
+static inline int fls(int x)
+{
+        int cnt;
+
+        asm ("bfffo %1{#0,#0},%0" : "=d" (cnt) : "dm" (x));
+
+        return 32 - cnt;
+}
+
+static inline int __fls(int x)
+{
+        return fls(x) - 1;
+}
+
+#include <asm-generic/bitops/fls64.h>
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+/* Bitmap functions for the minix filesystem */
+
+static inline int minix_find_first_zero_bit(const void *vaddr, unsigned size)
+{
+        const unsigned short *p = vaddr, *addr = vaddr;
+        int res;
+        unsigned short num;
+
+        if (!size)
+                return 0;
+
+        size = (size >> 4) + ((size & 15) > 0);
+        while (*p++ == 0xffff)
+        {
+                if (--size == 0)
+                        return (p - addr) << 4;
+        }
+
+        num = ~*--p;
+        __asm__ __volatile__ ("bfffo %1{#16,#16},%0"
+                              : "=d" (res) : "d" (num & -num));
+        return ((p - addr) << 4) + (res ^ 31);
+}
+
+#define minix_test_and_set_bit(nr, addr)        __test_and_set_bit((nr) ^ 16, (unsigned long *)(addr))
+#define minix_set_bit(nr,addr)                  __set_bit((nr) ^ 16, (unsigned long *)(addr))
+#define minix_test_and_clear_bit(nr, addr)      __test_and_clear_bit((nr) ^ 16, (unsigned long *)(addr))
+
+static inline int minix_test_bit(int nr, const void *vaddr)
+{
+        const unsigned short *p = vaddr;
+        return (p[nr >> 4] & (1U << (nr & 15))) != 0;
+}
+
+/* Bitmap functions for the ext2 filesystem. */
+
+#define ext2_set_bit(nr, addr)                  __test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_set_bit_atomic(lock, nr, addr)     test_and_set_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_clear_bit(nr, addr)                __test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+#define ext2_clear_bit_atomic(lock, nr, addr)   test_and_clear_bit((nr) ^ 24, (unsigned long *)(addr))
+
+static inline int ext2_test_bit(int nr, const void *vaddr)
+{
+        const unsigned char *p = vaddr;
+        return (p[nr >> 3] & (1U << (nr & 7))) != 0;
+}
+
+static inline int ext2_find_first_zero_bit(const void *vaddr, unsigned size)
+{
+        const unsigned long *p = vaddr, *addr = vaddr;
+        int res;
+
+        if (!size)
+                return 0;
+
+        size = (size >> 5) + ((size & 31) > 0);
+        while (*p++ == ~0UL)
+        {
+                if (--size == 0)
+                        return (p - addr) << 5;
+        }
+
+        --p;
+        for (res = 0; res < 32; res++)
+                if (!ext2_test_bit (res, p))
+                        break;
+        return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size,
+                                          unsigned offset)
+{
+        const unsigned long *addr = vaddr;
+        const unsigned long *p = addr + (offset >> 5);
+        int bit = offset & 31UL, res;
+
+        if (offset >= size)
+                return size;
+
+        if (bit) {
+                /* Look for zero in first longword */
+                for (res = bit; res < 32; res++)
+                        if (!ext2_test_bit (res, p))
+                                return (p - addr) * 32 + res;
+                p++;
+        }
+        /* No zero yet, search remaining full bytes for a zero */
+        res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
+        return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
+{
+        const unsigned long *p = vaddr, *addr = vaddr;
+        int res;
+
+        if (!size)
+                return 0;
+
+        size = (size >> 5) + ((size & 31) > 0);
+        while (*p++ == 0UL) {
+                if (--size == 0)
+                        return (p - addr) << 5;
+        }
+
+        --p;
+        for (res = 0; res < 32; res++)
+                if (ext2_test_bit(res, p))
+                        break;
+        return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
+                                     unsigned offset)
+{
+        const unsigned long *addr = vaddr;
+        const unsigned long *p = addr + (offset >> 5);
+        int bit = offset & 31UL, res;
+
+        if (offset >= size)
+                return size;
+
+        if (bit) {
+                /* Look for one in first longword */
+                for (res = bit; res < 32; res++)
+                        if (ext2_test_bit(res, p))
+                                return (p - addr) * 32 + res;
+                p++;
+        }
+        /* No set bit yet, search remaining full bytes for a set bit */
+        res = ext2_find_first_bit(p, size - 32 * (p - addr));
+        return (p - addr) * 32 + res;
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_BITOPS_H */
diff --git a/arch/m68k/include/asm/bitops_no.h b/arch/m68k/include/asm/bitops_no.h
new file mode 100644
index 000000000000..9d3cbe5fad1e
--- /dev/null
+++ b/arch/m68k/include/asm/bitops_no.h
@@ -0,0 +1,337 @@
+#ifndef _M68KNOMMU_BITOPS_H
+#define _M68KNOMMU_BITOPS_H
+
+/*
+ * Copyright 1992, Linus Torvalds.
+ */
+
+#include <linux/compiler.h>
+#include <asm/byteorder.h>      /* swab32 */
+
+#ifdef __KERNEL__
+
+#ifndef _LINUX_BITOPS_H
+#error only <linux/bitops.h> can be included directly
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline int ffs(unsigned int val)
+{
+        if (!val)
+                return 0;
+
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+                    );
+        val++;
+        return val;
+}
+
+static inline int __ffs(unsigned int val)
+{
+        asm volatile(
+                        "bitrev %0\n\t"
+                        "ff1 %0\n\t"
+                        : "=d" (val)
+                        : "0" (val)
+                    );
+        return val;
+}
+
+#else
+#include <asm-generic/bitops/ffs.h>
+#include <asm-generic/bitops/__ffs.h>
+#endif
+
+#include <asm-generic/bitops/sched.h>
+#include <asm-generic/bitops/ffz.h>
+
+static __inline__ void set_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %0,%%a0; bset %1,(%%a0)"
+             : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "d" (nr)
+             : "%a0", "cc");
+#else
+        __asm__ __volatile__ ("bset %1,%0"
+             : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "di" (nr)
+             : "cc");
+#endif
+}
+
+#define __set_bit(nr, addr) set_bit(nr, addr)
+
+/*
+ * clear_bit() doesn't provide any barrier for the compiler.
+ */
+#define smp_mb__before_clear_bit()      barrier()
+#define smp_mb__after_clear_bit()       barrier()
+
+static __inline__ void clear_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %0,%%a0; bclr %1,(%%a0)"
+             : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "d" (nr)
+             : "%a0", "cc");
+#else
+        __asm__ __volatile__ ("bclr %1,%0"
+             : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "di" (nr)
+             : "cc");
+#endif
+}
+
+#define __clear_bit(nr, addr) clear_bit(nr, addr)
+
+static __inline__ void change_bit(int nr, volatile unsigned long * addr)
+{
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %0,%%a0; bchg %1,(%%a0)"
+             : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "d" (nr)
+             : "%a0", "cc");
+#else
+        __asm__ __volatile__ ("bchg %1,%0"
+             : "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "di" (nr)
+             : "cc");
+#endif
+}
+
+#define __change_bit(nr, addr) change_bit(nr, addr)
+
+static __inline__ int test_and_set_bit(int nr, volatile unsigned long * addr)
+{
+        char retval;
+
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "d" (nr)
+             : "%a0");
+#else
+        __asm__ __volatile__ ("bset %2,%1; sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "di" (nr)
+             /* No clobber */);
+#endif
+
+        return retval;
+}
+
+#define __test_and_set_bit(nr, addr) test_and_set_bit(nr, addr)
+
+static __inline__ int test_and_clear_bit(int nr, volatile unsigned long * addr)
+{
+        char retval;
+
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "d" (nr)
+             : "%a0");
+#else
+        __asm__ __volatile__ ("bclr %2,%1; sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "di" (nr)
+             /* No clobber */);
+#endif
+
+        return retval;
+}
+
+#define __test_and_clear_bit(nr, addr) test_and_clear_bit(nr, addr)
+
+static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
+{
+        char retval;
+
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %1,%%a0\n\tbchg %2,(%%a0)\n\tsne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "d" (nr)
+             : "%a0");
+#else
+        __asm__ __volatile__ ("bchg %2,%1; sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[(nr^31) >> 3])
+             : "di" (nr)
+             /* No clobber */);
+#endif
+
+        return retval;
+}
+
+#define __test_and_change_bit(nr, addr) test_and_change_bit(nr, addr)
+
+/*
+ * This routine doesn't need to be atomic.
+ */
+static __inline__ int __constant_test_bit(int nr, const volatile unsigned long * addr)
+{
+        return ((1UL << (nr & 31)) & (((const volatile unsigned int *) addr)[nr >> 5])) != 0;
+}
+
+static __inline__ int __test_bit(int nr, const volatile unsigned long * addr)
+{
+        int     * a = (int *) addr;
+        int     mask;
+
+        a += nr >> 5;
+        mask = 1 << (nr & 0x1f);
+        return ((mask & *a) != 0);
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ __constant_test_bit((nr),(addr)) : \
+ __test_bit((nr),(addr)))
+
+#include <asm-generic/bitops/find.h>
+#include <asm-generic/bitops/hweight.h>
+#include <asm-generic/bitops/lock.h>
+
+static __inline__ int ext2_set_bit(int nr, volatile void * addr)
+{
+        char retval;
+
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %1,%%a0; bset %2,(%%a0); sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+             : "d" (nr)
+             : "%a0");
+#else
+        __asm__ __volatile__ ("bset %2,%1; sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+             : "di" (nr)
+             /* No clobber */);
+#endif
+
+        return retval;
+}
+
+static __inline__ int ext2_clear_bit(int nr, volatile void * addr)
+{
+        char retval;
+
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %1,%%a0; bclr %2,(%%a0); sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+             : "d" (nr)
+             : "%a0");
+#else
+        __asm__ __volatile__ ("bclr %2,%1; sne %0"
+             : "=d" (retval), "+m" (((volatile char *)addr)[nr >> 3])
+             : "di" (nr)
+             /* No clobber */);
+#endif
+
+        return retval;
+}
+
+#define ext2_set_bit_atomic(lock, nr, addr)             \
+        ({                                              \
+                int ret;                                \
+                spin_lock(lock);                        \
+                ret = ext2_set_bit((nr), (addr));       \
+                spin_unlock(lock);                      \
+                ret;                                    \
+        })
+
+#define ext2_clear_bit_atomic(lock, nr, addr)           \
+        ({                                              \
+                int ret;                                \
+                spin_lock(lock);                        \
+                ret = ext2_clear_bit((nr), (addr));     \
+                spin_unlock(lock);                      \
+                ret;                                    \
+        })
+
+static __inline__ int ext2_test_bit(int nr, const volatile void * addr)
+{
+        char retval;
+
+#ifdef CONFIG_COLDFIRE
+        __asm__ __volatile__ ("lea %1,%%a0; btst %2,(%%a0); sne %0"
+             : "=d" (retval)
+             : "m" (((const volatile char *)addr)[nr >> 3]), "d" (nr)
+             : "%a0");
+#else
+        __asm__ __volatile__ ("btst %2,%1; sne %0"
+             : "=d" (retval)
+             : "m" (((const volatile char *)addr)[nr >> 3]), "di" (nr)
+             /* No clobber */);
+#endif
+
+        return retval;
+}
+
+#define ext2_find_first_zero_bit(addr, size) \
+        ext2_find_next_zero_bit((addr), (size), 0)
+
+static __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+{
+        unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+        unsigned long result = offset & ~31UL;
+        unsigned long tmp;
+
+        if (offset >= size)
+                return size;
+        size -= result;
+        offset &= 31UL;
+        if(offset) {
+                /* We hold the little endian value in tmp, but then the
+                 * shift is illegal. So we could keep a big endian value
+                 * in tmp, like this:
+                 *
+                 * tmp = __swab32(*(p++));
+                 * tmp |= ~0UL >> (32-offset);
+                 *
+                 * but this would decrease performance, so we change the
+                 * shift:
+                 */
+                tmp = *(p++);
+                tmp |= __swab32(~0UL >> (32-offset));
+                if(size < 32)
+                        goto found_first;
+                if(~tmp)
+                        goto found_middle;
+                size -= 32;
+                result += 32;
+        }
+        while(size & ~31UL) {
+                if(~(tmp = *(p++)))
+                        goto found_middle;
+                result += 32;
+                size -= 32;
+        }
+        if(!size)
+                return result;
+        tmp = *p;
+
+found_first:
+        /* tmp is little endian, so we would have to swab the shift,
+         * see above. But then we have to swab tmp below for ffz, so
+         * we might as well do this here.
+         */
+        return result + ffz(__swab32(tmp) | (~0UL << size));
+found_middle:
+        return result + ffz(__swab32(tmp));
+}
+
+#define ext2_find_next_bit(addr, size, off) \
+        generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+#include <asm-generic/bitops/minix.h>
+
+#endif /* __KERNEL__ */
+
+#include <asm-generic/bitops/fls.h>
+#include <asm-generic/bitops/__fls.h>
+#include <asm-generic/bitops/fls64.h>
+
+#endif /* _M68KNOMMU_BITOPS_H */
diff --git a/arch/m68k/include/asm/blinken.h b/arch/m68k/include/asm/blinken.h
new file mode 100644
index 000000000000..1a749cf7b06d
--- /dev/null
+++ b/arch/m68k/include/asm/blinken.h
@@ -0,0 +1,32 @@
+/*
+** asm/blinken.h -- m68k blinkenlights support (currently hp300 only)
+**
+** (c) 1998 Phil Blundell <philb@gnu.org>
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _M68K_BLINKEN_H
+#define _M68K_BLINKEN_H
+
+#include <asm/setup.h>
+#include <asm/io.h>
+
+#define HP300_LEDS              0xf001ffff
+
+extern unsigned char ledstate;
+
+static __inline__ void blinken_leds(int on, int off)
+{
+        if (MACH_IS_HP300)
+        {
+                ledstate |= on;
+                ledstate &= ~off;
+                out_8(HP300_LEDS, ~ledstate);
+        }
+}
+
+#endif
diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h
new file mode 100644
index 000000000000..fedf3e326121
--- /dev/null
+++ b/arch/m68k/include/asm/bootinfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bootinfo_no.h"
+#else
+#include "bootinfo_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/bootinfo_mm.h b/arch/m68k/include/asm/bootinfo_mm.h
new file mode 100644
index 000000000000..fb8a06b9ab6a
--- /dev/null
+++ b/arch/m68k/include/asm/bootinfo_mm.h
@@ -0,0 +1,378 @@
+/*
+** asm/bootinfo.h -- Definition of the Linux/m68k boot information structure
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+**   Added bi_atari part of the machine dependent union bi_un; for now it
+**   contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+**   Renamed to setup.h; added some useful macros to allow gcc some
+**   optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+**   Redesign of the boot information structure; renamed to bootinfo.h again
+** 27/11/96 Geert Uytterhoeven:
+**   Backwards compatibility with bootinfo interface version 1.0
+*/
+
+#ifndef _M68K_BOOTINFO_H
+#define _M68K_BOOTINFO_H
+
+
+    /*
+     *  Bootinfo definitions
+     *
+     *  This is an easily parsable and extendable structure containing all
+     *  information to be passed from the bootstrap to the kernel.
+     *
+     *  This way I hope to keep all future changes back/forewards compatible.
+     *  Thus, keep your fingers crossed...
+     *
+     *  This structure is copied right after the kernel bss by the bootstrap
+     *  routine.
+     */
+
+#ifndef __ASSEMBLY__
+
+struct bi_record {
+    unsigned short tag;                 /* tag ID */
+    unsigned short size;                /* size of record (in bytes) */
+    unsigned long data[0];              /* data */
+};
+
+#endif /* __ASSEMBLY__ */
+
+
+    /*
+     *  Tag Definitions
+     *
+     *  Machine independent tags start counting from 0x0000
+     *  Machine dependent tags start counting from 0x8000
+     */
+
+#define BI_LAST                 0x0000  /* last record (sentinel) */
+#define BI_MACHTYPE             0x0001  /* machine type (u_long) */
+#define BI_CPUTYPE              0x0002  /* cpu type (u_long) */
+#define BI_FPUTYPE              0x0003  /* fpu type (u_long) */
+#define BI_MMUTYPE              0x0004  /* mmu type (u_long) */
+#define BI_MEMCHUNK             0x0005  /* memory chunk address and size */
+                                        /* (struct mem_info) */
+#define BI_RAMDISK              0x0006  /* ramdisk address and size */
+                                        /* (struct mem_info) */
+#define BI_COMMAND_LINE         0x0007  /* kernel command line parameters */
+                                        /* (string) */
+
+    /*
+     *  Amiga-specific tags
+     */
+
+#define BI_AMIGA_MODEL          0x8000  /* model (u_long) */
+#define BI_AMIGA_AUTOCON        0x8001  /* AutoConfig device */
+                                        /* (struct ConfigDev) */
+#define BI_AMIGA_CHIP_SIZE      0x8002  /* size of Chip RAM (u_long) */
+#define BI_AMIGA_VBLANK         0x8003  /* VBLANK frequency (u_char) */
+#define BI_AMIGA_PSFREQ         0x8004  /* power supply frequency (u_char) */
+#define BI_AMIGA_ECLOCK         0x8005  /* EClock frequency (u_long) */
+#define BI_AMIGA_CHIPSET        0x8006  /* native chipset present (u_long) */
+#define BI_AMIGA_SERPER         0x8007  /* serial port period (u_short) */
+
+    /*
+     *  Atari-specific tags
+     */
+
+#define BI_ATARI_MCH_COOKIE     0x8000  /* _MCH cookie from TOS (u_long) */
+#define BI_ATARI_MCH_TYPE       0x8001  /* special machine type (u_long) */
+                                        /* (values are ATARI_MACH_* defines */
+
+/* mch_cookie values (upper word) */
+#define ATARI_MCH_ST            0
+#define ATARI_MCH_STE           1
+#define ATARI_MCH_TT            2
+#define ATARI_MCH_FALCON        3
+
+/* mch_type values */
+#define ATARI_MACH_NORMAL       0       /* no special machine type */
+#define ATARI_MACH_MEDUSA       1       /* Medusa 040 */
+#define ATARI_MACH_HADES        2       /* Hades 040 or 060 */
+#define ATARI_MACH_AB40         3       /* Afterburner040 on Falcon */
+
+    /*
+     *  VME-specific tags
+     */
+
+#define BI_VME_TYPE             0x8000  /* VME sub-architecture (u_long) */
+#define BI_VME_BRDINFO          0x8001  /* VME board information (struct) */
+
+/* BI_VME_TYPE codes */
+#define VME_TYPE_TP34V          0x0034  /* Tadpole TP34V */
+#define VME_TYPE_MVME147        0x0147  /* Motorola MVME147 */
+#define VME_TYPE_MVME162        0x0162  /* Motorola MVME162 */
+#define VME_TYPE_MVME166        0x0166  /* Motorola MVME166 */
+#define VME_TYPE_MVME167        0x0167  /* Motorola MVME167 */
+#define VME_TYPE_MVME172        0x0172  /* Motorola MVME172 */
+#define VME_TYPE_MVME177        0x0177  /* Motorola MVME177 */
+#define VME_TYPE_BVME4000       0x4000  /* BVM Ltd. BVME4000 */
+#define VME_TYPE_BVME6000       0x6000  /* BVM Ltd. BVME6000 */
+
+/* BI_VME_BRDINFO is a 32 byte struct as returned by the Bug code on
+ * Motorola VME boards.  Contains board number, Bug version, board
+ * configuration options, etc.  See include/asm/mvme16xhw.h for details.
+ */
+
+
+    /*
+     *  Macintosh-specific tags (all u_long)
+     */
+
+#define BI_MAC_MODEL            0x8000  /* Mac Gestalt ID (model type) */
+#define BI_MAC_VADDR            0x8001  /* Mac video base address */
+#define BI_MAC_VDEPTH           0x8002  /* Mac video depth */
+#define BI_MAC_VROW             0x8003  /* Mac video rowbytes */
+#define BI_MAC_VDIM             0x8004  /* Mac video dimensions */
+#define BI_MAC_VLOGICAL         0x8005  /* Mac video logical base */
+#define BI_MAC_SCCBASE          0x8006  /* Mac SCC base address */
+#define BI_MAC_BTIME            0x8007  /* Mac boot time */
+#define BI_MAC_GMTBIAS          0x8008  /* Mac GMT timezone offset */
+#define BI_MAC_MEMSIZE          0x8009  /* Mac RAM size (sanity check) */
+#define BI_MAC_CPUID            0x800a  /* Mac CPU type (sanity check) */
+#define BI_MAC_ROMBASE          0x800b  /* Mac system ROM base address */
+
+    /*
+     *  Macintosh hardware profile data - unused, see macintosh.h for
+     *  resonable type values
+     */
+
+#define BI_MAC_VIA1BASE         0x8010  /* Mac VIA1 base address (always present) */
+#define BI_MAC_VIA2BASE         0x8011  /* Mac VIA2 base address (type varies) */
+#define BI_MAC_VIA2TYPE         0x8012  /* Mac VIA2 type (VIA, RBV, OSS) */
+#define BI_MAC_ADBTYPE          0x8013  /* Mac ADB interface type */
+#define BI_MAC_ASCBASE          0x8014  /* Mac Apple Sound Chip base address */
+#define BI_MAC_SCSI5380         0x8015  /* Mac NCR 5380 SCSI (base address, multi) */
+#define BI_MAC_SCSIDMA          0x8016  /* Mac SCSI DMA (base address) */
+#define BI_MAC_SCSI5396         0x8017  /* Mac NCR 53C96 SCSI (base address, multi) */
+#define BI_MAC_IDETYPE          0x8018  /* Mac IDE interface type */
+#define BI_MAC_IDEBASE          0x8019  /* Mac IDE interface base address */
+#define BI_MAC_NUBUS            0x801a  /* Mac Nubus type (none, regular, pseudo) */
+#define BI_MAC_SLOTMASK         0x801b  /* Mac Nubus slots present */
+#define BI_MAC_SCCTYPE          0x801c  /* Mac SCC serial type (normal, IOP) */
+#define BI_MAC_ETHTYPE          0x801d  /* Mac builtin ethernet type (Sonic, MACE */
+#define BI_MAC_ETHBASE          0x801e  /* Mac builtin ethernet base address */
+#define BI_MAC_PMU              0x801f  /* Mac power management / poweroff hardware */
+#define BI_MAC_IOP_SWIM         0x8020  /* Mac SWIM floppy IOP */
+#define BI_MAC_IOP_ADB          0x8021  /* Mac ADB IOP */
+
+    /*
+     * Mac: compatibility with old booter data format (temporarily)
+     * Fields unused with the new bootinfo can be deleted now; instead of
+     * adding new fields the struct might be splitted into a hardware address
+     * part and a hardware type part
+     */
+
+#ifndef __ASSEMBLY__
+
+struct mac_booter_data
+{
+        unsigned long videoaddr;
+        unsigned long videorow;
+        unsigned long videodepth;
+        unsigned long dimensions;
+        unsigned long args;
+        unsigned long boottime;
+        unsigned long gmtbias;
+        unsigned long bootver;
+        unsigned long videological;
+        unsigned long sccbase;
+        unsigned long id;
+        unsigned long memsize;
+        unsigned long serialmf;
+        unsigned long serialhsk;
+        unsigned long serialgpi;
+        unsigned long printmf;
+        unsigned long printhsk;
+        unsigned long printgpi;
+        unsigned long cpuid;
+        unsigned long rombase;
+        unsigned long adbdelay;
+        unsigned long timedbra;
+};
+
+extern struct mac_booter_data
+        mac_bi_data;
+
+#endif
+
+    /*
+     *  Apollo-specific tags
+     */
+
+#define BI_APOLLO_MODEL         0x8000  /* model (u_long) */
+
+    /*
+     *  HP300-specific tags
+     */
+
+#define BI_HP300_MODEL          0x8000  /* model (u_long) */
+#define BI_HP300_UART_SCODE     0x8001  /* UART select code (u_long) */
+#define BI_HP300_UART_ADDR      0x8002  /* phys. addr of UART (u_long) */
+
+    /*
+     * Stuff for bootinfo interface versioning
+     *
+     * At the start of kernel code, a 'struct bootversion' is located.
+     * bootstrap checks for a matching version of the interface before booting
+     * a kernel, to avoid user confusion if kernel and bootstrap don't work
+     * together :-)
+     *
+     * If incompatible changes are made to the bootinfo interface, the major
+     * number below should be stepped (and the minor reset to 0) for the
+     * appropriate machine. If a change is backward-compatible, the minor
+     * should be stepped. "Backwards-compatible" means that booting will work,
+     * but certain features may not.
+     */
+
+#define BOOTINFOV_MAGIC                 0x4249561A      /* 'BIV^Z' */
+#define MK_BI_VERSION(major,minor)      (((major)<<16)+(minor))
+#define BI_VERSION_MAJOR(v)             (((v) >> 16) & 0xffff)
+#define BI_VERSION_MINOR(v)             ((v) & 0xffff)
+
+#ifndef __ASSEMBLY__
+
+struct bootversion {
+    unsigned short branch;
+    unsigned long magic;
+    struct {
+        unsigned long machtype;
+        unsigned long version;
+    } machversions[0];
+};
+
+#endif /* __ASSEMBLY__ */
+
+#define AMIGA_BOOTI_VERSION    MK_BI_VERSION( 2, 0 )
+#define ATARI_BOOTI_VERSION    MK_BI_VERSION( 2, 1 )
+#define MAC_BOOTI_VERSION      MK_BI_VERSION( 2, 0 )
+#define MVME147_BOOTI_VERSION  MK_BI_VERSION( 2, 0 )
+#define MVME16x_BOOTI_VERSION  MK_BI_VERSION( 2, 0 )
+#define BVME6000_BOOTI_VERSION MK_BI_VERSION( 2, 0 )
+#define Q40_BOOTI_VERSION      MK_BI_VERSION( 2, 0 )
+#define HP300_BOOTI_VERSION    MK_BI_VERSION( 2, 0 )
+
+#ifdef BOOTINFO_COMPAT_1_0
+
+    /*
+     *  Backwards compatibility with bootinfo interface version 1.0
+     */
+
+#define COMPAT_AMIGA_BOOTI_VERSION    MK_BI_VERSION( 1, 0 )
+#define COMPAT_ATARI_BOOTI_VERSION    MK_BI_VERSION( 1, 0 )
+#define COMPAT_MAC_BOOTI_VERSION      MK_BI_VERSION( 1, 0 )
+
+#include <linux/zorro.h>
+
+#define COMPAT_NUM_AUTO    16
+
+struct compat_bi_Amiga {
+    int model;
+    int num_autocon;
+    struct ConfigDev autocon[COMPAT_NUM_AUTO];
+    unsigned long chip_size;
+    unsigned char vblank;
+    unsigned char psfreq;
+    unsigned long eclock;
+    unsigned long chipset;
+    unsigned long hw_present;
+};
+
+struct compat_bi_Atari {
+    unsigned long hw_present;
+    unsigned long mch_cookie;
+};
+
+#ifndef __ASSEMBLY__
+
+struct compat_bi_Macintosh
+{
+        unsigned long videoaddr;
+        unsigned long videorow;
+        unsigned long videodepth;
+        unsigned long dimensions;
+        unsigned long args;
+        unsigned long boottime;
+        unsigned long gmtbias;
+        unsigned long bootver;
+        unsigned long videological;
+        unsigned long sccbase;
+        unsigned long id;
+        unsigned long memsize;
+        unsigned long serialmf;
+        unsigned long serialhsk;
+        unsigned long serialgpi;
+        unsigned long printmf;
+        unsigned long printhsk;
+        unsigned long printgpi;
+        unsigned long cpuid;
+        unsigned long rombase;
+        unsigned long adbdelay;
+        unsigned long timedbra;
+};
+
+#endif
+
+struct compat_mem_info {
+    unsigned long addr;
+    unsigned long size;
+};
+
+#define COMPAT_NUM_MEMINFO  4
+
+#define COMPAT_CPUB_68020 0
+#define COMPAT_CPUB_68030 1
+#define COMPAT_CPUB_68040 2
+#define COMPAT_CPUB_68060 3
+#define COMPAT_FPUB_68881 5
+#define COMPAT_FPUB_68882 6
+#define COMPAT_FPUB_68040 7
+#define COMPAT_FPUB_68060 8
+
+#define COMPAT_CPU_68020    (1<<COMPAT_CPUB_68020)
+#define COMPAT_CPU_68030    (1<<COMPAT_CPUB_68030)
+#define COMPAT_CPU_68040    (1<<COMPAT_CPUB_68040)
+#define COMPAT_CPU_68060    (1<<COMPAT_CPUB_68060)
+#define COMPAT_CPU_MASK     (31)
+#define COMPAT_FPU_68881    (1<<COMPAT_FPUB_68881)
+#define COMPAT_FPU_68882    (1<<COMPAT_FPUB_68882)
+#define COMPAT_FPU_68040    (1<<COMPAT_FPUB_68040)
+#define COMPAT_FPU_68060    (1<<COMPAT_FPUB_68060)
+#define COMPAT_FPU_MASK     (0xfe0)
+
+#define COMPAT_CL_SIZE      (256)
+
+struct compat_bootinfo {
+    unsigned long machtype;
+    unsigned long cputype;
+    struct compat_mem_info memory[COMPAT_NUM_MEMINFO];
+    int num_memory;
+    unsigned long ramdisk_size;
+    unsigned long ramdisk_addr;
+    char command_line[COMPAT_CL_SIZE];
+    union {
+        struct compat_bi_Amiga     bi_ami;
+        struct compat_bi_Atari     bi_ata;
+        struct compat_bi_Macintosh bi_mac;
+    } bi_un;
+};
+
+#define bi_amiga        bi_un.bi_ami
+#define bi_atari        bi_un.bi_ata
+#define bi_mac          bi_un.bi_mac
+
+#endif /* BOOTINFO_COMPAT_1_0 */
+
+
+#endif /* _M68K_BOOTINFO_H */
diff --git a/arch/m68k/include/asm/bootinfo_no.h b/arch/m68k/include/asm/bootinfo_no.h
new file mode 100644
index 000000000000..c12e526f5189
--- /dev/null
+++ b/arch/m68k/include/asm/bootinfo_no.h
@@ -0,0 +1,2 @@
+
+/* Nothing for m68knommu */
diff --git a/arch/m68k/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h
new file mode 100644
index 000000000000..bdc1a4ac4fe9
--- /dev/null
+++ b/arch/m68k/include/asm/bootstd.h
@@ -0,0 +1,132 @@
+/* bootstd.h:  Bootloader system call interface
+ *
+ * (c) 1999, Rt-Control, Inc.
+ */
+
+#ifndef __BOOTSTD_H__
+#define __BOOTSTD_H__
+
+#define NR_BSC 21            /* last used bootloader system call */
+
+#define __BN_reset        0  /* reset and start the bootloader */
+#define __BN_test         1  /* tests the system call interface */
+#define __BN_exec         2  /* executes a bootloader image */
+#define __BN_exit         3  /* terminates a bootloader image */
+#define __BN_program      4  /* program FLASH from a chain */
+#define __BN_erase        5  /* erase sector(s) of FLASH */
+#define __BN_open         6
+#define __BN_write        7
+#define __BN_read         8
+#define __BN_close        9
+#define __BN_mmap         10 /* map a file descriptor into memory */
+#define __BN_munmap       11 /* remove a file to memory mapping */
+#define __BN_gethwaddr    12 /* get the hardware address of my interfaces */
+#define __BN_getserialnum 13 /* get the serial number of this board */
+#define __BN_getbenv      14 /* get a bootloader envvar */
+#define __BN_setbenv      15 /* get a bootloader envvar */
+#define __BN_setpmask     16 /* set the protection mask */
+#define __BN_readenv      17 /* read environment variables */
+#define __BN_flash_chattr_range         18
+#define __BN_flash_erase_range          19
+#define __BN_flash_write_range          20
+
+/* Calling conventions compatible to (uC)linux/68k
+ * We use simmilar macros to call into the bootloader as for uClinux
+ */
+
+#define __bsc_return(type, res) \
+do { \
+   if ((unsigned long)(res) >= (unsigned long)(-64)) { \
+      /* let errno be a function, preserve res in %d0 */ \
+      int __err = -(res); \
+      errno = __err; \
+      res = -1; \
+   } \
+   return (type)(res); \
+} while (0)
+
+#define _bsc0(type,name) \
+type name(void) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc1(type,name,atype,a) \
+type name(atype a) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc2(type,name,atype,a,btype,b) \
+type name(atype a, btype b) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc3(type,name,atype,a,btype,b,ctype,c) \
+type name(atype a, btype b, ctype c) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc4(type,name,atype,a,btype,b,ctype,c,dtype,d) \
+type name(atype a, btype b, ctype c, dtype d) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#define _bsc5(type,name,atype,a,btype,b,ctype,c,dtype,d,etype,e) \
+type name(atype a, btype b, ctype c, dtype d, etype e) \
+{ \
+   register long __res __asm__ ("%d0") = __BN_##name; \
+   register long __a __asm__ ("%d1") = (long)a; \
+   register long __b __asm__ ("%d2") = (long)b; \
+   register long __c __asm__ ("%d3") = (long)c; \
+   register long __d __asm__ ("%d4") = (long)d; \
+   register long __e __asm__ ("%d5") = (long)e; \
+   __asm__ __volatile__ ("trap #2" \
+                         : "=g" (__res) \
+                         : "0" (__res), "d" (__a), "d" (__b), \
+                           "d" (__c), "d" (__d), "d" (__e) \
+                         ); \
+   __bsc_return(type,__res); \
+}
+
+#endif /* __BOOTSTD_H__ */
diff --git a/arch/m68k/include/asm/bug.h b/arch/m68k/include/asm/bug.h
new file mode 100644
index 000000000000..997e0944ebc1
--- /dev/null
+++ b/arch/m68k/include/asm/bug.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bug_no.h"
+#else
+#include "bug_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/bug_mm.h b/arch/m68k/include/asm/bug_mm.h
new file mode 100644
index 000000000000..e5b528deb8a8
--- /dev/null
+++ b/arch/m68k/include/asm/bug_mm.h
@@ -0,0 +1,29 @@
+#ifndef _M68K_BUG_H
+#define _M68K_BUG_H
+
+
+#ifdef CONFIG_BUG
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#ifndef CONFIG_SUN3
+#define BUG() do { \
+        printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+        __builtin_trap(); \
+} while (0)
+#else
+#define BUG() do { \
+        printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
+        panic("BUG!"); \
+} while (0)
+#endif
+#else
+#define BUG() do { \
+        __builtin_trap(); \
+} while (0)
+#endif
+
+#define HAVE_ARCH_BUG
+#endif
+
+#include <asm-generic/bug.h>
+
+#endif
diff --git a/arch/m68k/include/asm/bug_no.h b/arch/m68k/include/asm/bug_no.h
new file mode 100644
index 000000000000..70e7dc0af21a
--- /dev/null
+++ b/arch/m68k/include/asm/bug_no.h
@@ -0,0 +1,4 @@
+#ifndef _M68KNOMMU_BUG_H
+#define _M68KNOMMU_BUG_H
+#include <asm-generic/bug.h>
+#endif
diff --git a/arch/m68k/include/asm/bugs.h b/arch/m68k/include/asm/bugs.h
new file mode 100644
index 000000000000..01f047d784ec
--- /dev/null
+++ b/arch/m68k/include/asm/bugs.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "bugs_no.h"
+#else
+#include "bugs_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/bugs_mm.h b/arch/m68k/include/asm/bugs_mm.h
new file mode 100644
index 000000000000..d01935592410
--- /dev/null
+++ b/arch/m68k/include/asm/bugs_mm.h
@@ -0,0 +1,14 @@
+/*
+ *  include/asm-m68k/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *      void check_bugs(void);
+ */
+
+extern void check_bugs(void);   /* in arch/m68k/kernel/setup.c */
diff --git a/arch/m68k/include/asm/bugs_no.h b/arch/m68k/include/asm/bugs_no.h
new file mode 100644
index 000000000000..5f382dac3a60
--- /dev/null
+++ b/arch/m68k/include/asm/bugs_no.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-m68k/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *      void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/arch/m68k/include/asm/bvme6000hw.h b/arch/m68k/include/asm/bvme6000hw.h
new file mode 100644
index 000000000000..f40d2f8510ee
--- /dev/null
+++ b/arch/m68k/include/asm/bvme6000hw.h
@@ -0,0 +1,150 @@
+#ifndef _M68K_BVME6000HW_H_
+#define _M68K_BVME6000HW_H_
+
+#include <asm/irq.h>
+
+/*
+ * PIT structure
+ */
+
+#define BVME_PIT_BASE   0xffa00000
+
+typedef struct {
+        unsigned char
+        pad_a[3], pgcr,
+        pad_b[3], psrr,
+        pad_c[3], paddr,
+        pad_d[3], pbddr,
+        pad_e[3], pcddr,
+        pad_f[3], pivr,
+        pad_g[3], pacr,
+        pad_h[3], pbcr,
+        pad_i[3], padr,
+        pad_j[3], pbdr,
+        pad_k[3], paar,
+        pad_l[3], pbar,
+        pad_m[3], pcdr,
+        pad_n[3], psr,
+        pad_o[3], res1,
+        pad_p[3], res2,
+        pad_q[3], tcr,
+        pad_r[3], tivr,
+        pad_s[3], res3,
+        pad_t[3], cprh,
+        pad_u[3], cprm,
+        pad_v[3], cprl,
+        pad_w[3], res4,
+        pad_x[3], crh,
+        pad_y[3], crm,
+        pad_z[3], crl,
+        pad_A[3], tsr,
+        pad_B[3], res5;
+} PitRegs_t, *PitRegsPtr;
+
+#define bvmepit   ((*(volatile PitRegsPtr)(BVME_PIT_BASE)))
+
+#define BVME_RTC_BASE   0xff900000
+
+typedef struct {
+        unsigned char
+        pad_a[3], msr,
+        pad_b[3], t0cr_rtmr,
+        pad_c[3], t1cr_omr,
+        pad_d[3], pfr_icr0,
+        pad_e[3], irr_icr1,
+        pad_f[3], bcd_tenms,
+        pad_g[3], bcd_sec,
+        pad_h[3], bcd_min,
+        pad_i[3], bcd_hr,
+        pad_j[3], bcd_dom,
+        pad_k[3], bcd_mth,
+        pad_l[3], bcd_year,
+        pad_m[3], bcd_ujcc,
+        pad_n[3], bcd_hjcc,
+        pad_o[3], bcd_dow,
+        pad_p[3], t0lsb,
+        pad_q[3], t0msb,
+        pad_r[3], t1lsb,
+        pad_s[3], t1msb,
+        pad_t[3], cmp_sec,
+        pad_u[3], cmp_min,
+        pad_v[3], cmp_hr,
+        pad_w[3], cmp_dom,
+        pad_x[3], cmp_mth,
+        pad_y[3], cmp_dow,
+        pad_z[3], sav_sec,
+        pad_A[3], sav_min,
+        pad_B[3], sav_hr,
+        pad_C[3], sav_dom,
+        pad_D[3], sav_mth,
+        pad_E[3], ram,
+        pad_F[3], test;
+} RtcRegs_t, *RtcPtr_t;
+
+
+#define BVME_I596_BASE  0xff100000
+
+#define BVME_ETHIRQ_REG 0xff20000b
+
+#define BVME_LOCAL_IRQ_STAT  0xff20000f
+
+#define BVME_ETHERR          0x02
+#define BVME_ABORT_STATUS    0x08
+
+#define BVME_NCR53C710_BASE     0xff000000
+
+#define BVME_SCC_A_ADDR 0xffb0000b
+#define BVME_SCC_B_ADDR 0xffb00003
+#define BVME_SCC_RTxC   7372800
+
+#define BVME_CONFIG_REG 0xff500003
+
+#define config_reg_ptr  (volatile unsigned char *)BVME_CONFIG_REG
+
+#define BVME_CONFIG_SW1 0x08
+#define BVME_CONFIG_SW2 0x04
+#define BVME_CONFIG_SW3 0x02
+#define BVME_CONFIG_SW4 0x01
+
+
+#define BVME_IRQ_TYPE_PRIO      0
+
+#define BVME_IRQ_PRN            (IRQ_USER+20)
+#define BVME_IRQ_TIMER          (IRQ_USER+25)
+#define BVME_IRQ_I596           IRQ_AUTO_2
+#define BVME_IRQ_SCSI           IRQ_AUTO_3
+#define BVME_IRQ_RTC            IRQ_AUTO_6
+#define BVME_IRQ_ABORT          IRQ_AUTO_7
+
+/* SCC interrupts */
+#define BVME_IRQ_SCC_BASE               IRQ_USER
+#define BVME_IRQ_SCCB_TX                IRQ_USER
+#define BVME_IRQ_SCCB_STAT              (IRQ_USER+2)
+#define BVME_IRQ_SCCB_RX                (IRQ_USER+4)
+#define BVME_IRQ_SCCB_SPCOND            (IRQ_USER+6)
+#define BVME_IRQ_SCCA_TX                (IRQ_USER+8)
+#define BVME_IRQ_SCCA_STAT              (IRQ_USER+10)
+#define BVME_IRQ_SCCA_RX                (IRQ_USER+12)
+#define BVME_IRQ_SCCA_SPCOND            (IRQ_USER+14)
+
+/* Address control registers */
+
+#define BVME_ACR_A32VBA         0xff400003
+#define BVME_ACR_A32MSK         0xff410003
+#define BVME_ACR_A24VBA         0xff420003
+#define BVME_ACR_A24MSK         0xff430003
+#define BVME_ACR_A16VBA         0xff440003
+#define BVME_ACR_A32LBA         0xff450003
+#define BVME_ACR_A24LBA         0xff460003
+#define BVME_ACR_ADDRCTL        0xff470003
+
+#define bvme_acr_a32vba         *(volatile unsigned char *)BVME_ACR_A32VBA
+#define bvme_acr_a32msk         *(volatile unsigned char *)BVME_ACR_A32MSK
+#define bvme_acr_a24vba         *(volatile unsigned char *)BVME_ACR_A24VBA
+#define bvme_acr_a24msk         *(volatile unsigned char *)BVME_ACR_A24MSK
+#define bvme_acr_a16vba         *(volatile unsigned char *)BVME_ACR_A16VBA
+#define bvme_acr_a32lba         *(volatile unsigned char *)BVME_ACR_A32LBA
+#define bvme_acr_a24lba         *(volatile unsigned char *)BVME_ACR_A24LBA
+#define bvme_acr_addrctl        *(volatile unsigned char *)BVME_ACR_ADDRCTL
+
+#endif
diff --git a/arch/m68k/include/asm/byteorder.h b/arch/m68k/include/asm/byteorder.h
new file mode 100644
index 000000000000..f20502a001f5
--- /dev/null
+++ b/arch/m68k/include/asm/byteorder.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "byteorder_no.h"
+#else
+#include "byteorder_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/byteorder_mm.h b/arch/m68k/include/asm/byteorder_mm.h
new file mode 100644
index 000000000000..31b260a88803
--- /dev/null
+++ b/arch/m68k/include/asm/byteorder_mm.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_BYTEORDER_H
+#define _M68K_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68K_BYTEORDER_H */
diff --git a/arch/m68k/include/asm/byteorder_no.h b/arch/m68k/include/asm/byteorder_no.h
new file mode 100644
index 000000000000..9c6c76a15041
--- /dev/null
+++ b/arch/m68k/include/asm/byteorder_no.h
@@ -0,0 +1,6 @@
+#ifndef _M68KNOMMU_BYTEORDER_H
+#define _M68KNOMMU_BYTEORDER_H
+
+#include <linux/byteorder/big_endian.h>
+
+#endif /* _M68KNOMMU_BYTEORDER_H */
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
new file mode 100644
index 000000000000..599c29bc8f40
--- /dev/null
+++ b/arch/m68k/include/asm/cache.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cache_no.h"
+#else
+#include "cache_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/cache_mm.h b/arch/m68k/include/asm/cache_mm.h
new file mode 100644
index 000000000000..fed3fd30de7e
--- /dev/null
+++ b/arch/m68k/include/asm/cache_mm.h
@@ -0,0 +1,11 @@
+/*
+ * include/asm-m68k/cache.h
+ */
+#ifndef __ARCH_M68K_CACHE_H
+#define __ARCH_M68K_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_SHIFT  4
+#define        L1_CACHE_BYTES  (1<< L1_CACHE_SHIFT)
+
+#endif
diff --git a/arch/m68k/include/asm/cache_no.h b/arch/m68k/include/asm/cache_no.h
new file mode 100644
index 000000000000..24e9eace5f8c
--- /dev/null
+++ b/arch/m68k/include/asm/cache_no.h
@@ -0,0 +1,12 @@
+#ifndef __ARCH_M68KNOMMU_CACHE_H
+#define __ARCH_M68KNOMMU_CACHE_H
+
+/* bytes per L1 cache line */
+#define        L1_CACHE_BYTES  16       /* this need to be at least 1 */
+
+/* m68k-elf-gcc  2.95.2 doesn't like these */
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
diff --git a/arch/m68k/include/asm/cachectl.h b/arch/m68k/include/asm/cachectl.h
new file mode 100644
index 000000000000..525978e959e3
--- /dev/null
+++ b/arch/m68k/include/asm/cachectl.h
@@ -0,0 +1,14 @@
+#ifndef _M68K_CACHECTL_H
+#define _M68K_CACHECTL_H
+
+/* Definitions for the cacheflush system call.  */
+
+#define FLUSH_SCOPE_LINE    1   /* Flush a cache line */
+#define FLUSH_SCOPE_PAGE    2   /* Flush a page */
+#define FLUSH_SCOPE_ALL     3   /* Flush the whole cache -- superuser only */
+
+#define FLUSH_CACHE_DATA    1   /* Writeback and flush data cache */
+#define FLUSH_CACHE_INSN    2   /* Flush instruction cache */
+#define FLUSH_CACHE_BOTH    3   /* Flush both caches */
+
+#endif /* _M68K_CACHECTL_H */
diff --git a/arch/m68k/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush.h
new file mode 100644
index 000000000000..a70d7319630a
--- /dev/null
+++ b/arch/m68k/include/asm/cacheflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "cacheflush_no.h"
+#else
+#include "cacheflush_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/cacheflush_mm.h b/arch/m68k/include/asm/cacheflush_mm.h
new file mode 100644
index 000000000000..16bf375fdbe1
--- /dev/null
+++ b/arch/m68k/include/asm/cacheflush_mm.h
@@ -0,0 +1,156 @@
+#ifndef _M68K_CACHEFLUSH_H
+#define _M68K_CACHEFLUSH_H
+
+#include <linux/mm.h>
+
+/* cache code */
+#define FLUSH_I_AND_D   (0x00000808)
+#define FLUSH_I         (0x00000008)
+
+/*
+ * Cache handling functions
+ */
+
+static inline void flush_icache(void)
+{
+        if (CPU_IS_040_OR_060)
+                asm volatile (  "nop\n"
+                        "       .chip   68040\n"
+                        "       cpusha  %bc\n"
+                        "       .chip   68k");
+        else {
+                unsigned long tmp;
+                asm volatile (  "movec  %%cacr,%0\n"
+                        "       or.w    %1,%0\n"
+                        "       movec   %0,%%cacr"
+                        : "=&d" (tmp)
+                        : "id" (FLUSH_I));
+        }
+}
+
+/*
+ * invalidate the cache for the specified memory range.
+ * It starts at the physical address specified for
+ * the given number of bytes.
+ */
+extern void cache_clear(unsigned long paddr, int len);
+/*
+ * push any dirty cache in the specified memory range.
+ * It starts at the physical address specified for
+ * the given number of bytes.
+ */
+extern void cache_push(unsigned long paddr, int len);
+
+/*
+ * push and invalidate pages in the specified user virtual
+ * memory range.
+ */
+extern void cache_push_v(unsigned long vaddr, int len);
+
+/* This is needed whenever the virtual mapping of the current
+   process changes.  */
+#define __flush_cache_all()                                     \
+({                                                              \
+        if (CPU_IS_040_OR_060)                                  \
+                __asm__ __volatile__("nop\n\t"                  \
+                                     ".chip 68040\n\t"          \
+                                     "cpusha %dc\n\t"           \
+                                     ".chip 68k");              \
+        else {                                                  \
+                unsigned long _tmp;                             \
+                __asm__ __volatile__("movec %%cacr,%0\n\t"      \
+                                     "orw %1,%0\n\t"            \
+                                     "movec %0,%%cacr"          \
+                                     : "=&d" (_tmp)             \
+                                     : "di" (FLUSH_I_AND_D));   \
+        }                                                       \
+})
+
+#define __flush_cache_030()                                     \
+({                                                              \
+        if (CPU_IS_020_OR_030) {                                \
+                unsigned long _tmp;                             \
+                __asm__ __volatile__("movec %%cacr,%0\n\t"      \
+                                     "orw %1,%0\n\t"            \
+                                     "movec %0,%%cacr"          \
+                                     : "=&d" (_tmp)             \
+                                     : "di" (FLUSH_I_AND_D));   \
+        }                                                       \
+})
+
+#define flush_cache_all() __flush_cache_all()
+
+#define flush_cache_vmap(start, end)            flush_cache_all()
+#define flush_cache_vunmap(start, end)          flush_cache_all()
+
+static inline void flush_cache_mm(struct mm_struct *mm)
+{
+        if (mm == current->mm)
+                __flush_cache_030();
+}
+
+#define flush_cache_dup_mm(mm)                  flush_cache_mm(mm)
+
+/* flush_cache_range/flush_cache_page must be macros to avoid
+   a dependency on linux/mm.h, which includes this file... */
+static inline void flush_cache_range(struct vm_area_struct *vma,
+                                     unsigned long start,
+                                     unsigned long end)
+{
+        if (vma->vm_mm == current->mm)
+                __flush_cache_030();
+}
+
+static inline void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
+{
+        if (vma->vm_mm == current->mm)
+                __flush_cache_030();
+}
+
+
+/* Push the page at kernel virtual address and clear the icache */
+/* RZ: use cpush %bc instead of cpush %dc, cinv %ic */
+static inline void __flush_page_to_ram(void *vaddr)
+{
+        if (CPU_IS_040_OR_060) {
+                __asm__ __volatile__("nop\n\t"
+                                     ".chip 68040\n\t"
+                                     "cpushp %%bc,(%0)\n\t"
+                                     ".chip 68k"
+                                     : : "a" (__pa(vaddr)));
+        } else {
+                unsigned long _tmp;
+                __asm__ __volatile__("movec %%cacr,%0\n\t"
+                                     "orw %1,%0\n\t"
+                                     "movec %0,%%cacr"
+                                     : "=&d" (_tmp)
+                                     : "di" (FLUSH_I));
+        }
+}
+
+#define flush_dcache_page(page)         __flush_page_to_ram(page_address(page))
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+#define flush_icache_page(vma, page)    __flush_page_to_ram(page_address(page))
+
+extern void flush_icache_user_range(struct vm_area_struct *vma, struct page *page,
+                                    unsigned long addr, int len);
+extern void flush_icache_range(unsigned long address, unsigned long endaddr);
+
+static inline void copy_to_user_page(struct vm_area_struct *vma,
+                                     struct page *page, unsigned long vaddr,
+                                     void *dst, void *src, int len)
+{
+        flush_cache_page(vma, vaddr, page_to_pfn(page));
+        memcpy(dst, src, len);
+        flush_icache_user_range(vma, page, vaddr, len);
+}
+static inline void copy_from_user_page(struct vm_area_struct *vma,
+                                       struct page *page, unsigned long vaddr,
+                                       void *dst, void *src, int len)
+{
+        flush_cache_page(vma, vaddr, page_to_pfn(page));
+        memcpy(dst, src, len);
+}
+
+#endif /* _M68K_CACHEFLUSH_H */
diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h
new file mode 100644
index 000000000000..87e5dc0413b4
--- /dev/null
+++ b/arch/m68k/include/asm/cacheflush_no.h
@@ -0,0 +1,84 @@
+#ifndef _M68KNOMMU_CACHEFLUSH_H
+#define _M68KNOMMU_CACHEFLUSH_H
+
+/*
+ * (C) Copyright 2000-2004, Greg Ungerer <gerg@snapgear.com>
+ */
+#include <linux/mm.h>
+
+#define flush_cache_all()                       __flush_cache_all()
+#define flush_cache_mm(mm)                      do { } while (0)
+#define flush_cache_dup_mm(mm)                  do { } while (0)
+#define flush_cache_range(vma, start, end)      __flush_cache_all()
+#define flush_cache_page(vma, vmaddr)           do { } while (0)
+#define flush_dcache_range(start,len)           __flush_cache_all()
+#define flush_dcache_page(page)                 do { } while (0)
+#define flush_dcache_mmap_lock(mapping)         do { } while (0)
+#define flush_dcache_mmap_unlock(mapping)       do { } while (0)
+#define flush_icache_range(start,len)           __flush_cache_all()
+#define flush_icache_page(vma,pg)               do { } while (0)
+#define flush_icache_user_range(vma,pg,adr,len) do { } while (0)
+#define flush_cache_vmap(start, end)            do { } while (0)
+#define flush_cache_vunmap(start, end)          do { } while (0)
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+        memcpy(dst, src, len)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+        memcpy(dst, src, len)
+
+static inline void __flush_cache_all(void)
+{
+#ifdef CONFIG_M5407
+        /*
+         *      Use cpushl to push and invalidate all cache lines.
+         *      Gas doesn't seem to know how to generate the ColdFire
+         *      cpushl instruction... Oh well, bit stuff it for now.
+         */
+        __asm__ __volatile__ (
+                "nop\n\t"
+                "clrl   %%d0\n\t"
+                "1:\n\t"
+                "movel  %%d0,%%a0\n\t"
+                "2:\n\t"
+                ".word  0xf468\n\t"
+                "addl   #0x10,%%a0\n\t"
+                "cmpl   #0x00000800,%%a0\n\t"
+                "blt    2b\n\t"
+                "addql  #1,%%d0\n\t"
+                "cmpil  #4,%%d0\n\t"
+                "bne    1b\n\t"
+                "movel  #0xb6088500,%%d0\n\t"
+                "movec  %%d0,%%CACR\n\t"
+                : : : "d0", "a0" );
+#endif /* CONFIG_M5407 */
+#if defined(CONFIG_M527x) || defined(CONFIG_M528x)
+        __asm__ __volatile__ (
+                "movel  #0x81000200, %%d0\n\t"
+                "movec  %%d0, %%CACR\n\t"
+                "nop\n\t"
+                : : : "d0" );
+#endif /* CONFIG_M527x || CONFIG_M528x */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+        __asm__ __volatile__ (
+                "movel  #0x81000100, %%d0\n\t"
+                "movec  %%d0, %%CACR\n\t"
+                "nop\n\t"
+                : : : "d0" );
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+#ifdef CONFIG_M5249
+        __asm__ __volatile__ (
+                "movel  #0xa1000200, %%d0\n\t"
+                "movec  %%d0, %%CACR\n\t"
+                "nop\n\t"
+                : : : "d0" );
+#endif /* CONFIG_M5249 */
+#ifdef CONFIG_M532x
+        __asm__ __volatile__ (
+                "movel  #0x81000200, %%d0\n\t"
+                "movec  %%d0, %%CACR\n\t"
+                "nop\n\t"
+                : : : "d0" );
+#endif /* CONFIG_M532x */
+}
+
+#endif /* _M68KNOMMU_CACHEFLUSH_H */
diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h
new file mode 100644
index 000000000000..1cf544767453
--- /dev/null
+++ b/arch/m68k/include/asm/checksum.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "checksum_no.h"
+#else
+#include "checksum_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/checksum_mm.h b/arch/m68k/include/asm/checksum_mm.h
new file mode 100644
index 000000000000..494f9aec37ea
--- /dev/null
+++ b/arch/m68k/include/asm/checksum_mm.h
@@ -0,0 +1,148 @@
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+                                                void *dst,
+                                                int len, __wsum sum,
+                                                int *csum_err);
+
+extern __wsum csum_partial_copy_nocheck(const void *src,
+                                              void *dst, int len,
+                                              __wsum sum);
+
+/*
+ *      This is a version of ip_compute_csum() optimized for IP headers,
+ *      which always checksum on 4 octet boundaries.
+ *
+ */
+static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
+{
+        unsigned int sum = 0;
+        unsigned long tmp;
+
+        __asm__ ("subqw #1,%2\n"
+                 "1:\t"
+                 "movel %1@+,%3\n\t"
+                 "addxl %3,%0\n\t"
+                 "dbra  %2,1b\n\t"
+                 "movel %0,%3\n\t"
+                 "swap  %3\n\t"
+                 "addxw %3,%0\n\t"
+                 "clrw  %3\n\t"
+                 "addxw %3,%0\n\t"
+                 : "=d" (sum), "=&a" (iph), "=&d" (ihl), "=&d" (tmp)
+                 : "0" (sum), "1" (iph), "2" (ihl)
+                 : "memory");
+        return (__force __sum16)~sum;
+}
+
+/*
+ *      Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+        unsigned int tmp = (__force u32)sum;
+        __asm__("swap %1\n\t"
+                "addw %1, %0\n\t"
+                "clrw %1\n\t"
+                "addxw %1, %0"
+                : "=&d" (sum), "=&d" (tmp)
+                : "0" (sum), "1" (tmp));
+        return (__force __sum16)~sum;
+}
+
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+{
+        __asm__ ("addl  %2,%0\n\t"
+                 "addxl %3,%0\n\t"
+                 "addxl %4,%0\n\t"
+                 "clrl %1\n\t"
+                 "addxl %1,%0"
+                 : "=&d" (sum), "=d" (saddr)
+                 : "g" (daddr), "1" (saddr), "d" (len + proto),
+                   "0" (sum));
+        return sum;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+static inline __sum16 ip_compute_csum(const void *buff, int len)
+{
+        return csum_fold (csum_partial(buff, len, 0));
+}
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+                __u32 len, unsigned short proto, __wsum sum)
+{
+        register unsigned long tmp;
+        __asm__("addl %2@,%0\n\t"
+                "movel %2@(4),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %2@(8),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %2@(12),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@,%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@(4),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@(8),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@(12),%1\n\t"
+                "addxl %1,%0\n\t"
+                "addxl %4,%0\n\t"
+                "clrl %1\n\t"
+                "addxl %1,%0"
+                : "=&d" (sum), "=&d" (tmp)
+                : "a" (saddr), "a" (daddr), "d" (len + proto),
+                  "0" (sum));
+
+        return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/checksum_no.h b/arch/m68k/include/asm/checksum_no.h
new file mode 100644
index 000000000000..81883482ffb1
--- /dev/null
+++ b/arch/m68k/include/asm/checksum_no.h
@@ -0,0 +1,132 @@
+#ifndef _M68K_CHECKSUM_H
+#define _M68K_CHECKSUM_H
+
+#include <linux/in6.h>
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+__wsum csum_partial(const void *buff, int len, __wsum sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+__wsum csum_partial_copy_nocheck(const void *src, void *dst,
+        int len, __wsum sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+
+extern __wsum csum_partial_copy_from_user(const void __user *src,
+        void *dst, int len, __wsum sum, int *csum_err);
+
+__sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+
+/*
+ *      Fold a partial checksum
+ */
+
+static inline __sum16 csum_fold(__wsum sum)
+{
+        unsigned int tmp = (__force u32)sum;
+#ifdef CONFIG_COLDFIRE
+        tmp = (tmp & 0xffff) + (tmp >> 16);
+        tmp = (tmp & 0xffff) + (tmp >> 16);
+        return (__force __sum16)~tmp;
+#else
+        __asm__("swap %1\n\t"
+                "addw %1, %0\n\t"
+                "clrw %1\n\t"
+                "addxw %1, %0"
+                : "=&d" (sum), "=&d" (tmp)
+                : "0" (sum), "1" (sum));
+        return (__force __sum16)~sum;
+#endif
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+{
+        __asm__ ("addl  %1,%0\n\t"
+                 "addxl %4,%0\n\t"
+                 "addxl %5,%0\n\t"
+                 "clrl %1\n\t"
+                 "addxl %1,%0"
+                 : "=&d" (sum), "=&d" (saddr)
+                 : "0" (daddr), "1" (saddr), "d" (len + proto),
+                   "d"(sum));
+        return sum;
+}
+
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+                  unsigned short proto, __wsum sum)
+{
+        return csum_fold(csum_tcpudp_nofold(saddr,daddr,len,proto,sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+#define _HAVE_ARCH_IPV6_CSUM
+static __inline__ __sum16
+csum_ipv6_magic(const struct in6_addr *saddr, const struct in6_addr *daddr,
+                __u32 len, unsigned short proto, __wsum sum)
+{
+        register unsigned long tmp;
+        __asm__("addl %2@,%0\n\t"
+                "movel %2@(4),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %2@(8),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %2@(12),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@,%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@(4),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@(8),%1\n\t"
+                "addxl %1,%0\n\t"
+                "movel %3@(12),%1\n\t"
+                "addxl %1,%0\n\t"
+                "addxl %4,%0\n\t"
+                "clrl %1\n\t"
+                "addxl %1,%0"
+                : "=&d" (sum), "=&d" (tmp)
+                : "a" (saddr), "a" (daddr), "d" (len + proto),
+                  "0" (sum));
+
+        return csum_fold(sum);
+}
+
+#endif /* _M68K_CHECKSUM_H */
diff --git a/arch/m68k/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h
new file mode 100644
index 000000000000..83a9fa4e618a
--- /dev/null
+++ b/arch/m68k/include/asm/coldfire.h
@@ -0,0 +1,51 @@
+/****************************************************************************/
+
+/*
+ *      coldfire.h -- Motorola ColdFire CPU sepecific defines
+ *
+ *      (C) Copyright 1999-2006, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef coldfire_h
+#define coldfire_h
+/****************************************************************************/
+
+
+/*
+ *      Define master clock frequency. This is essentially done at config
+ *      time now. No point enumerating dozens of possible clock options
+ *      here. Also the peripheral clock (bus clock) divide ratio is set
+ *      at config time too.
+ */
+#ifdef CONFIG_CLOCK_SET
+#define MCF_CLK         CONFIG_CLOCK_FREQ
+#define MCF_BUSCLK      (CONFIG_CLOCK_FREQ / CONFIG_CLOCK_DIV)
+#else
+#error "Don't know what your ColdFire CPU clock frequency is??"
+#endif
+
+/*
+ *      Define the processor support peripherals base address.
+ *      This is generally setup by the boards start up code.
+ */
+#define MCF_MBAR        0x10000000
+#define MCF_MBAR2       0x80000000
+#if defined(CONFIG_M520x)
+#define MCF_IPSBAR      0xFC000000
+#else
+#define MCF_IPSBAR      0x40000000
+#endif
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) || \
+    defined(CONFIG_M520x)
+#undef MCF_MBAR
+#define MCF_MBAR        MCF_IPSBAR
+#elif defined(CONFIG_M532x)
+#undef MCF_MBAR
+#define MCF_MBAR        0x00000000
+#endif
+
+/****************************************************************************/
+#endif  /* coldfire_h */
diff --git a/arch/m68k/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h
new file mode 100644
index 000000000000..edf5eb6c08d2
--- /dev/null
+++ b/arch/m68k/include/asm/commproc.h
@@ -0,0 +1,703 @@
+
+/*
+ * 68360 Communication Processor Module.
+ * Copyright (c) 2000 Michael Leslie <mleslie@lineo.com> (mc68360) after:
+ * Copyright (c) 1997 Dan Malek <dmalek@jlc.net> (mpc8xx)
+ *
+ * This file contains structures and information for the communication
+ * processor channels.  Some CPM control and status is available
+ * through the 68360 internal memory map.  See include/asm/360_immap.h for details.
+ * This file is not a complete map of all of the 360 QUICC's capabilities
+ *
+ * On the MBX board, EPPC-Bug loads CPM microcode into the first 512
+ * bytes of the DP RAM and relocates the I2C parameter area to the
+ * IDMA1 space.  The remaining DP RAM is available for buffer descriptors
+ * or other use.
+ */
+#ifndef __CPM_360__
+#define __CPM_360__
+
+
+/* CPM Command register masks: */
+#define CPM_CR_RST      ((ushort)0x8000)
+#define CPM_CR_OPCODE   ((ushort)0x0f00)
+#define CPM_CR_CHAN     ((ushort)0x00f0)
+#define CPM_CR_FLG      ((ushort)0x0001)
+
+/* CPM Command set (opcodes): */
+#define CPM_CR_INIT_TRX         ((ushort)0x0000)
+#define CPM_CR_INIT_RX          ((ushort)0x0001)
+#define CPM_CR_INIT_TX          ((ushort)0x0002)
+#define CPM_CR_HUNT_MODE        ((ushort)0x0003)
+#define CPM_CR_STOP_TX          ((ushort)0x0004)
+#define CPM_CR_GRSTOP_TX        ((ushort)0x0005)
+#define CPM_CR_RESTART_TX       ((ushort)0x0006)
+#define CPM_CR_CLOSE_RXBD       ((ushort)0x0007)
+#define CPM_CR_SET_GADDR        ((ushort)0x0008)
+#define CPM_CR_GCI_TIMEOUT      ((ushort)0x0009)
+#define CPM_CR_GCI_ABORT        ((ushort)0x000a)
+#define CPM_CR_RESET_BCS        ((ushort)0x000a)
+
+/* CPM Channel numbers. */
+#define CPM_CR_CH_SCC1  ((ushort)0x0000)
+#define CPM_CR_CH_SCC2  ((ushort)0x0004)
+#define CPM_CR_CH_SPI   ((ushort)0x0005)        /* SPI / Timers */
+#define CPM_CR_CH_TMR   ((ushort)0x0005)
+#define CPM_CR_CH_SCC3  ((ushort)0x0008)
+#define CPM_CR_CH_SMC1  ((ushort)0x0009)        /* SMC1 / IDMA1 */
+#define CPM_CR_CH_IDMA1 ((ushort)0x0009)
+#define CPM_CR_CH_SCC4  ((ushort)0x000c)
+#define CPM_CR_CH_SMC2  ((ushort)0x000d)        /* SMC2 / IDMA2 */
+#define CPM_CR_CH_IDMA2 ((ushort)0x000d)
+
+
+#define mk_cr_cmd(CH, CMD)      ((CMD << 8) | (CH << 4))
+
+#if 1 /* mleslie: I dinna think we have any such restrictions on
+       * DP RAM aboard the 360 board - see the MC68360UM p.3-3 */
+
+/* The dual ported RAM is multi-functional.  Some areas can be (and are
+ * being) used for microcode.  There is an area that can only be used
+ * as data ram for buffer descriptors, which is all we use right now.
+ * Currently the first 512 and last 256 bytes are used for microcode.
+ */
+/* mleslie: The uCquicc board is using no extra microcode in DPRAM */
+#define CPM_DATAONLY_BASE       ((uint)0x0000)
+#define CPM_DATAONLY_SIZE       ((uint)0x0800)
+#define CPM_DP_NOSPACE          ((uint)0x7fffffff)
+
+#endif
+
+
+/* Export the base address of the communication processor registers
+ * and dual port ram. */
+/* extern       cpm360_t        *cpmp; */               /* Pointer to comm processor */
+extern QUICC *pquicc;
+uint         m360_cpm_dpalloc(uint size);
+/* void         *m360_cpm_hostalloc(uint size); */
+void          m360_cpm_setbrg(uint brg, uint rate);
+
+#if 0 /* use QUICC_BD declared in include/asm/m68360_quicc.h  */
+/* Buffer descriptors used by many of the CPM protocols. */
+typedef struct cpm_buf_desc {
+        ushort  cbd_sc;         /* Status and Control */
+        ushort  cbd_datlen;     /* Data length in buffer */
+        uint    cbd_bufaddr;    /* Buffer address in host memory */
+} cbd_t;
+#endif
+
+
+/* rx bd status/control bits */
+#define BD_SC_EMPTY     ((ushort)0x8000)        /* Recieve is empty */
+#define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor in table */
+#define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
+#define BD_SC_LAST      ((ushort)0x0800)        /* Last buffer in frame OR control char */
+
+#define BD_SC_FIRST     ((ushort)0x0400)        /* 1st buffer in an HDLC frame */
+#define BD_SC_ADDR      ((ushort)0x0400)        /* 1st byte is a multidrop address */
+
+#define BD_SC_CM        ((ushort)0x0200)        /* Continous mode */
+#define BD_SC_ID        ((ushort)0x0100)        /* Received too many idles */
+
+#define BD_SC_AM        ((ushort)0x0080)        /* Multidrop address match */
+#define BD_SC_DE        ((ushort)0x0080)        /* DPLL Error (HDLC) */
+
+#define BD_SC_BR        ((ushort)0x0020)        /* Break received */
+#define BD_SC_LG        ((ushort)0x0020)        /* Frame length violation (HDLC) */
+
+#define BD_SC_FR        ((ushort)0x0010)        /* Framing error */
+#define BD_SC_NO        ((ushort)0x0010)        /* Nonoctet aligned frame (HDLC) */
+
+#define BD_SC_PR        ((ushort)0x0008)        /* Parity error */
+#define BD_SC_AB        ((ushort)0x0008)        /* Received abort Sequence (HDLC) */
+
+#define BD_SC_OV        ((ushort)0x0002)        /* Overrun */
+#define BD_SC_CD        ((ushort)0x0001)        /* Carrier Detect lost */
+
+/* tx bd status/control bits (as differ from rx bd) */
+#define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
+#define BD_SC_TC        ((ushort)0x0400)        /* Transmit CRC */
+#define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
+#define BD_SC_UN        ((ushort)0x0002)        /* Underrun */
+
+
+
+
+/* Parameter RAM offsets. */
+
+
+
+/* In 2.4 ppc, the PROFF_S?C? are used as byte offsets into DPRAM.
+ * In 2.0, we use a more structured C struct map of DPRAM, and so 
+ * instead, we need only a parameter ram `slot'  */
+
+#define PRSLOT_SCC1     0
+#define PRSLOT_SCC2     1
+#define PRSLOT_SCC3     2
+#define PRSLOT_SMC1     2
+#define PRSLOT_SCC4     3
+#define PRSLOT_SMC2     3
+
+
+/* #define PROFF_SCC1   ((uint)0x0000) */
+/* #define PROFF_SCC2   ((uint)0x0100) */
+/* #define PROFF_SCC3   ((uint)0x0200) */
+/* #define PROFF_SMC1   ((uint)0x0280) */
+/* #define PROFF_SCC4   ((uint)0x0300) */
+/* #define PROFF_SMC2   ((uint)0x0380) */
+
+
+/* Define enough so I can at least use the serial port as a UART.
+ * The MBX uses SMC1 as the host serial port.
+ */
+typedef struct smc_uart {
+        ushort  smc_rbase;      /* Rx Buffer descriptor base address */
+        ushort  smc_tbase;      /* Tx Buffer descriptor base address */
+        u_char  smc_rfcr;       /* Rx function code */
+        u_char  smc_tfcr;       /* Tx function code */
+        ushort  smc_mrblr;      /* Max receive buffer length */
+        uint    smc_rstate;     /* Internal */
+        uint    smc_idp;        /* Internal */
+        ushort  smc_rbptr;      /* Internal */
+        ushort  smc_ibc;        /* Internal */
+        uint    smc_rxtmp;      /* Internal */
+        uint    smc_tstate;     /* Internal */
+        uint    smc_tdp;        /* Internal */
+        ushort  smc_tbptr;      /* Internal */
+        ushort  smc_tbc;        /* Internal */
+        uint    smc_txtmp;      /* Internal */
+        ushort  smc_maxidl;     /* Maximum idle characters */
+        ushort  smc_tmpidl;     /* Temporary idle counter */
+        ushort  smc_brklen;     /* Last received break length */
+        ushort  smc_brkec;      /* rcv'd break condition counter */
+        ushort  smc_brkcr;      /* xmt break count register */
+        ushort  smc_rmask;      /* Temporary bit mask */
+} smc_uart_t;
+
+/* Function code bits.
+*/
+#define SMC_EB  ((u_char)0x10)  /* Set big endian byte order */
+
+/* SMC uart mode register.
+*/
+#define SMCMR_REN       ((ushort)0x0001)
+#define SMCMR_TEN       ((ushort)0x0002)
+#define SMCMR_DM        ((ushort)0x000c)
+#define SMCMR_SM_GCI    ((ushort)0x0000)
+#define SMCMR_SM_UART   ((ushort)0x0020)
+#define SMCMR_SM_TRANS  ((ushort)0x0030)
+#define SMCMR_SM_MASK   ((ushort)0x0030)
+#define SMCMR_PM_EVEN   ((ushort)0x0100)        /* Even parity, else odd */
+#define SMCMR_REVD      SMCMR_PM_EVEN
+#define SMCMR_PEN       ((ushort)0x0200)        /* Parity enable */
+#define SMCMR_BS        SMCMR_PEN
+#define SMCMR_SL        ((ushort)0x0400)        /* Two stops, else one */
+#define SMCR_CLEN_MASK  ((ushort)0x7800)        /* Character length */
+#define smcr_mk_clen(C) (((C) << 11) & SMCR_CLEN_MASK)
+
+/* SMC2 as Centronics parallel printer.  It is half duplex, in that
+ * it can only receive or transmit.  The parameter ram values for
+ * each direction are either unique or properly overlap, so we can
+ * include them in one structure.
+ */
+typedef struct smc_centronics {
+        ushort  scent_rbase;
+        ushort  scent_tbase;
+        u_char  scent_cfcr;
+        u_char  scent_smask;
+        ushort  scent_mrblr;
+        uint    scent_rstate;
+        uint    scent_r_ptr;
+        ushort  scent_rbptr;
+        ushort  scent_r_cnt;
+        uint    scent_rtemp;
+        uint    scent_tstate;
+        uint    scent_t_ptr;
+        ushort  scent_tbptr;
+        ushort  scent_t_cnt;
+        uint    scent_ttemp;
+        ushort  scent_max_sl;
+        ushort  scent_sl_cnt;
+        ushort  scent_character1;
+        ushort  scent_character2;
+        ushort  scent_character3;
+        ushort  scent_character4;
+        ushort  scent_character5;
+        ushort  scent_character6;
+        ushort  scent_character7;
+        ushort  scent_character8;
+        ushort  scent_rccm;
+        ushort  scent_rccr;
+} smc_cent_t;
+
+/* Centronics Status Mask Register.
+*/
+#define SMC_CENT_F      ((u_char)0x08)
+#define SMC_CENT_PE     ((u_char)0x04)
+#define SMC_CENT_S      ((u_char)0x02)
+
+/* SMC Event and Mask register.
+*/
+#define SMCM_BRKE       ((unsigned char)0x40)   /* When in UART Mode */
+#define SMCM_BRK        ((unsigned char)0x10)   /* When in UART Mode */
+#define SMCM_TXE        ((unsigned char)0x10)   /* When in Transparent Mode */
+#define SMCM_BSY        ((unsigned char)0x04)
+#define SMCM_TX         ((unsigned char)0x02)
+#define SMCM_RX         ((unsigned char)0x01)
+
+/* Baud rate generators.
+*/
+#define CPM_BRG_RST             ((uint)0x00020000)
+#define CPM_BRG_EN              ((uint)0x00010000)
+#define CPM_BRG_EXTC_INT        ((uint)0x00000000)
+#define CPM_BRG_EXTC_CLK2       ((uint)0x00004000)
+#define CPM_BRG_EXTC_CLK6       ((uint)0x00008000)
+#define CPM_BRG_ATB             ((uint)0x00002000)
+#define CPM_BRG_CD_MASK         ((uint)0x00001ffe)
+#define CPM_BRG_DIV16           ((uint)0x00000001)
+
+/* SCCs.
+*/
+#define SCC_GSMRH_IRP           ((uint)0x00040000)
+#define SCC_GSMRH_GDE           ((uint)0x00010000)
+#define SCC_GSMRH_TCRC_CCITT    ((uint)0x00008000)
+#define SCC_GSMRH_TCRC_BISYNC   ((uint)0x00004000)
+#define SCC_GSMRH_TCRC_HDLC     ((uint)0x00000000)
+#define SCC_GSMRH_REVD          ((uint)0x00002000)
+#define SCC_GSMRH_TRX           ((uint)0x00001000)
+#define SCC_GSMRH_TTX           ((uint)0x00000800)
+#define SCC_GSMRH_CDP           ((uint)0x00000400)
+#define SCC_GSMRH_CTSP          ((uint)0x00000200)
+#define SCC_GSMRH_CDS           ((uint)0x00000100)
+#define SCC_GSMRH_CTSS          ((uint)0x00000080)
+#define SCC_GSMRH_TFL           ((uint)0x00000040)
+#define SCC_GSMRH_RFW           ((uint)0x00000020)
+#define SCC_GSMRH_TXSY          ((uint)0x00000010)
+#define SCC_GSMRH_SYNL16        ((uint)0x0000000c)
+#define SCC_GSMRH_SYNL8         ((uint)0x00000008)
+#define SCC_GSMRH_SYNL4         ((uint)0x00000004)
+#define SCC_GSMRH_RTSM          ((uint)0x00000002)
+#define SCC_GSMRH_RSYN          ((uint)0x00000001)
+
+#define SCC_GSMRL_SIR           ((uint)0x80000000)      /* SCC2 only */
+#define SCC_GSMRL_EDGE_NONE     ((uint)0x60000000)
+#define SCC_GSMRL_EDGE_NEG      ((uint)0x40000000)
+#define SCC_GSMRL_EDGE_POS      ((uint)0x20000000)
+#define SCC_GSMRL_EDGE_BOTH     ((uint)0x00000000)
+#define SCC_GSMRL_TCI           ((uint)0x10000000)
+#define SCC_GSMRL_TSNC_3        ((uint)0x0c000000)
+#define SCC_GSMRL_TSNC_4        ((uint)0x08000000)
+#define SCC_GSMRL_TSNC_14       ((uint)0x04000000)
+#define SCC_GSMRL_TSNC_INF      ((uint)0x00000000)
+#define SCC_GSMRL_RINV          ((uint)0x02000000)
+#define SCC_GSMRL_TINV          ((uint)0x01000000)
+#define SCC_GSMRL_TPL_128       ((uint)0x00c00000)
+#define SCC_GSMRL_TPL_64        ((uint)0x00a00000)
+#define SCC_GSMRL_TPL_48        ((uint)0x00800000)
+#define SCC_GSMRL_TPL_32        ((uint)0x00600000)
+#define SCC_GSMRL_TPL_16        ((uint)0x00400000)
+#define SCC_GSMRL_TPL_8         ((uint)0x00200000)
+#define SCC_GSMRL_TPL_NONE      ((uint)0x00000000)
+#define SCC_GSMRL_TPP_ALL1      ((uint)0x00180000)
+#define SCC_GSMRL_TPP_01        ((uint)0x00100000)
+#define SCC_GSMRL_TPP_10        ((uint)0x00080000)
+#define SCC_GSMRL_TPP_ZEROS     ((uint)0x00000000)
+#define SCC_GSMRL_TEND          ((uint)0x00040000)
+#define SCC_GSMRL_TDCR_32       ((uint)0x00030000)
+#define SCC_GSMRL_TDCR_16       ((uint)0x00020000)
+#define SCC_GSMRL_TDCR_8        ((uint)0x00010000)
+#define SCC_GSMRL_TDCR_1        ((uint)0x00000000)
+#define SCC_GSMRL_RDCR_32       ((uint)0x0000c000)
+#define SCC_GSMRL_RDCR_16       ((uint)0x00008000)
+#define SCC_GSMRL_RDCR_8        ((uint)0x00004000)
+#define SCC_GSMRL_RDCR_1        ((uint)0x00000000)
+#define SCC_GSMRL_RENC_DFMAN    ((uint)0x00003000)
+#define SCC_GSMRL_RENC_MANCH    ((uint)0x00002000)
+#define SCC_GSMRL_RENC_FM0      ((uint)0x00001000)
+#define SCC_GSMRL_RENC_NRZI     ((uint)0x00000800)
+#define SCC_GSMRL_RENC_NRZ      ((uint)0x00000000)
+#define SCC_GSMRL_TENC_DFMAN    ((uint)0x00000600)
+#define SCC_GSMRL_TENC_MANCH    ((uint)0x00000400)
+#define SCC_GSMRL_TENC_FM0      ((uint)0x00000200)
+#define SCC_GSMRL_TENC_NRZI     ((uint)0x00000100)
+#define SCC_GSMRL_TENC_NRZ      ((uint)0x00000000)
+#define SCC_GSMRL_DIAG_LE       ((uint)0x000000c0)      /* Loop and echo */
+#define SCC_GSMRL_DIAG_ECHO     ((uint)0x00000080)
+#define SCC_GSMRL_DIAG_LOOP     ((uint)0x00000040)
+#define SCC_GSMRL_DIAG_NORM     ((uint)0x00000000)
+#define SCC_GSMRL_ENR           ((uint)0x00000020)
+#define SCC_GSMRL_ENT           ((uint)0x00000010)
+#define SCC_GSMRL_MODE_ENET     ((uint)0x0000000c)
+#define SCC_GSMRL_MODE_DDCMP    ((uint)0x00000009)
+#define SCC_GSMRL_MODE_BISYNC   ((uint)0x00000008)
+#define SCC_GSMRL_MODE_V14      ((uint)0x00000007)
+#define SCC_GSMRL_MODE_AHDLC    ((uint)0x00000006)
+#define SCC_GSMRL_MODE_PROFIBUS ((uint)0x00000005)
+#define SCC_GSMRL_MODE_UART     ((uint)0x00000004)
+#define SCC_GSMRL_MODE_SS7      ((uint)0x00000003)
+#define SCC_GSMRL_MODE_ATALK    ((uint)0x00000002)
+#define SCC_GSMRL_MODE_HDLC     ((uint)0x00000000)
+
+#define SCC_TODR_TOD            ((ushort)0x8000)
+
+/* SCC Event and Mask register.
+*/
+#define SCCM_TXE        ((unsigned char)0x10)
+#define SCCM_BSY        ((unsigned char)0x04)
+#define SCCM_TX         ((unsigned char)0x02)
+#define SCCM_RX         ((unsigned char)0x01)
+
+typedef struct scc_param {
+        ushort  scc_rbase;      /* Rx Buffer descriptor base address */
+        ushort  scc_tbase;      /* Tx Buffer descriptor base address */
+        u_char  scc_rfcr;       /* Rx function code */
+        u_char  scc_tfcr;       /* Tx function code */
+        ushort  scc_mrblr;      /* Max receive buffer length */
+        uint    scc_rstate;     /* Internal */
+        uint    scc_idp;        /* Internal */
+        ushort  scc_rbptr;      /* Internal */
+        ushort  scc_ibc;        /* Internal */
+        uint    scc_rxtmp;      /* Internal */
+        uint    scc_tstate;     /* Internal */
+        uint    scc_tdp;        /* Internal */
+        ushort  scc_tbptr;      /* Internal */
+        ushort  scc_tbc;        /* Internal */
+        uint    scc_txtmp;      /* Internal */
+        uint    scc_rcrc;       /* Internal */
+        uint    scc_tcrc;       /* Internal */
+} sccp_t;
+
+
+/* Function code bits.
+ */
+#define SCC_EB  ((u_char)0x10)  /* Set big endian byte order */
+#define SCC_FC_DMA ((u_char)0x08) /* Set SDMA */
+
+/* CPM Ethernet through SCC1.
+ */
+typedef struct scc_enet {
+        sccp_t  sen_genscc;
+        uint    sen_cpres;      /* Preset CRC */
+        uint    sen_cmask;      /* Constant mask for CRC */
+        uint    sen_crcec;      /* CRC Error counter */
+        uint    sen_alec;       /* alignment error counter */
+        uint    sen_disfc;      /* discard frame counter */
+        ushort  sen_pads;       /* Tx short frame pad character */
+        ushort  sen_retlim;     /* Retry limit threshold */
+        ushort  sen_retcnt;     /* Retry limit counter */
+        ushort  sen_maxflr;     /* maximum frame length register */
+        ushort  sen_minflr;     /* minimum frame length register */
+        ushort  sen_maxd1;      /* maximum DMA1 length */
+        ushort  sen_maxd2;      /* maximum DMA2 length */
+        ushort  sen_maxd;       /* Rx max DMA */
+        ushort  sen_dmacnt;     /* Rx DMA counter */
+        ushort  sen_maxb;       /* Max BD byte count */
+        ushort  sen_gaddr1;     /* Group address filter */
+        ushort  sen_gaddr2;
+        ushort  sen_gaddr3;
+        ushort  sen_gaddr4;
+        uint    sen_tbuf0data0; /* Save area 0 - current frame */
+        uint    sen_tbuf0data1; /* Save area 1 - current frame */
+        uint    sen_tbuf0rba;   /* Internal */
+        uint    sen_tbuf0crc;   /* Internal */
+        ushort  sen_tbuf0bcnt;  /* Internal */
+        ushort  sen_paddrh;     /* physical address (MSB) */
+        ushort  sen_paddrm;
+        ushort  sen_paddrl;     /* physical address (LSB) */
+        ushort  sen_pper;       /* persistence */
+        ushort  sen_rfbdptr;    /* Rx first BD pointer */
+        ushort  sen_tfbdptr;    /* Tx first BD pointer */
+        ushort  sen_tlbdptr;    /* Tx last BD pointer */
+        uint    sen_tbuf1data0; /* Save area 0 - current frame */
+        uint    sen_tbuf1data1; /* Save area 1 - current frame */
+        uint    sen_tbuf1rba;   /* Internal */
+        uint    sen_tbuf1crc;   /* Internal */
+        ushort  sen_tbuf1bcnt;  /* Internal */
+        ushort  sen_txlen;      /* Tx Frame length counter */
+        ushort  sen_iaddr1;     /* Individual address filter */
+        ushort  sen_iaddr2;
+        ushort  sen_iaddr3;
+        ushort  sen_iaddr4;
+        ushort  sen_boffcnt;    /* Backoff counter */
+
+        /* NOTE: Some versions of the manual have the following items
+         * incorrectly documented.  Below is the proper order.
+         */
+        ushort  sen_taddrh;     /* temp address (MSB) */
+        ushort  sen_taddrm;
+        ushort  sen_taddrl;     /* temp address (LSB) */
+} scc_enet_t;
+
+
+
+#if defined (CONFIG_UCQUICC)
+/* uCquicc has the following signals connected to Ethernet:
+ *  68360    - lxt905
+ * PA0/RXD1  - rxd
+ * PA1/TXD1  - txd
+ * PA8/CLK1  - tclk
+ * PA9/CLK2  - rclk
+ * PC0/!RTS1 - t_en
+ * PC1/!CTS1 - col
+ * PC5/!CD1  - cd
+ */
+#define PA_ENET_RXD     PA_RXD1
+#define PA_ENET_TXD     PA_TXD1
+#define PA_ENET_TCLK    PA_CLK1
+#define PA_ENET_RCLK    PA_CLK2
+#define PC_ENET_TENA    PC_RTS1
+#define PC_ENET_CLSN    PC_CTS1
+#define PC_ENET_RENA    PC_CD1
+
+/* Control bits in the SICR to route TCLK (CLK1) and RCLK (CLK2) to
+ * SCC1.
+ */
+#define SICR_ENET_MASK  ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x0000002c)
+
+#endif /* config_ucquicc */
+
+
+#ifdef MBX
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC1 use.  The TCLK and RCLK seem unique
+ * to the MBX860 board.  Any two of the four available clocks could be
+ * used, and the MPC860 cookbook manual has an example using different
+ * clock pins.
+ */
+#define PA_ENET_RXD     ((ushort)0x0001)
+#define PA_ENET_TXD     ((ushort)0x0002)
+#define PA_ENET_TCLK    ((ushort)0x0200)
+#define PA_ENET_RCLK    ((ushort)0x0800)
+#define PC_ENET_TENA    ((ushort)0x0001)
+#define PC_ENET_CLSN    ((ushort)0x0010)
+#define PC_ENET_RENA    ((ushort)0x0020)
+
+/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
+ * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
+ */
+#define SICR_ENET_MASK  ((uint)0x000000ff)
+#define SICR_ENET_CLKRT ((uint)0x0000003d)
+#endif
+
+#ifdef CONFIG_RPXLITE
+/* This ENET stuff is for the MPC850 with ethernet on SCC2.  Some of
+ * this may be unique to the RPX-Lite configuration.
+ * Note TENA is on Port B.
+ */
+#define PA_ENET_RXD     ((ushort)0x0004)
+#define PA_ENET_TXD     ((ushort)0x0008)
+#define PA_ENET_TCLK    ((ushort)0x0200)
+#define PA_ENET_RCLK    ((ushort)0x0800)
+#define PB_ENET_TENA    ((uint)0x00002000)
+#define PC_ENET_CLSN    ((ushort)0x0040)
+#define PC_ENET_RENA    ((ushort)0x0080)
+
+#define SICR_ENET_MASK  ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00003d00)
+#endif
+
+#ifdef CONFIG_BSEIP
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.
+ * This is unique to the BSE ip-Engine board.
+ */
+#define PA_ENET_RXD     ((ushort)0x0004)
+#define PA_ENET_TXD     ((ushort)0x0008)
+#define PA_ENET_TCLK    ((ushort)0x0100)
+#define PA_ENET_RCLK    ((ushort)0x0200)
+#define PB_ENET_TENA    ((uint)0x00002000)
+#define PC_ENET_CLSN    ((ushort)0x0040)
+#define PC_ENET_RENA    ((ushort)0x0080)
+
+/* BSE uses port B and C bits for PHY control also.
+*/
+#define PB_BSE_POWERUP  ((uint)0x00000004)
+#define PB_BSE_FDXDIS   ((uint)0x00008000)
+#define PC_BSE_LOOPBACK ((ushort)0x0800)
+
+#define SICR_ENET_MASK  ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT ((uint)0x00002c00)
+#endif
+
+/* SCC Event register as used by Ethernet.
+*/
+#define SCCE_ENET_GRA   ((ushort)0x0080)        /* Graceful stop complete */
+#define SCCE_ENET_TXE   ((ushort)0x0010)        /* Transmit Error */
+#define SCCE_ENET_RXF   ((ushort)0x0008)        /* Full frame received */
+#define SCCE_ENET_BSY   ((ushort)0x0004)        /* All incoming buffers full */
+#define SCCE_ENET_TXB   ((ushort)0x0002)        /* A buffer was transmitted */
+#define SCCE_ENET_RXB   ((ushort)0x0001)        /* A buffer was received */
+
+/* SCC Mode Register (PMSR) as used by Ethernet.
+*/
+#define SCC_PMSR_HBC    ((ushort)0x8000)        /* Enable heartbeat */
+#define SCC_PMSR_FC     ((ushort)0x4000)        /* Force collision */
+#define SCC_PMSR_RSH    ((ushort)0x2000)        /* Receive short frames */
+#define SCC_PMSR_IAM    ((ushort)0x1000)        /* Check individual hash */
+#define SCC_PMSR_ENCRC  ((ushort)0x0800)        /* Ethernet CRC mode */
+#define SCC_PMSR_PRO    ((ushort)0x0200)        /* Promiscuous mode */
+#define SCC_PMSR_BRO    ((ushort)0x0100)        /* Catch broadcast pkts */
+#define SCC_PMSR_SBT    ((ushort)0x0080)        /* Special backoff timer */
+#define SCC_PMSR_LPB    ((ushort)0x0040)        /* Set Loopback mode */
+#define SCC_PMSR_SIP    ((ushort)0x0020)        /* Sample Input Pins */
+#define SCC_PMSR_LCW    ((ushort)0x0010)        /* Late collision window */
+#define SCC_PMSR_NIB22  ((ushort)0x000a)        /* Start frame search */
+#define SCC_PMSR_FDE    ((ushort)0x0001)        /* Full duplex enable */
+
+/* Buffer descriptor control/status used by Ethernet receive.
+*/
+#define BD_ENET_RX_EMPTY        ((ushort)0x8000)
+#define BD_ENET_RX_WRAP         ((ushort)0x2000)
+#define BD_ENET_RX_INTR         ((ushort)0x1000)
+#define BD_ENET_RX_LAST         ((ushort)0x0800)
+#define BD_ENET_RX_FIRST        ((ushort)0x0400)
+#define BD_ENET_RX_MISS         ((ushort)0x0100)
+#define BD_ENET_RX_LG           ((ushort)0x0020)
+#define BD_ENET_RX_NO           ((ushort)0x0010)
+#define BD_ENET_RX_SH           ((ushort)0x0008)
+#define BD_ENET_RX_CR           ((ushort)0x0004)
+#define BD_ENET_RX_OV           ((ushort)0x0002)
+#define BD_ENET_RX_CL           ((ushort)0x0001)
+#define BD_ENET_RX_STATS        ((ushort)0x013f)        /* All status bits */
+
+/* Buffer descriptor control/status used by Ethernet transmit.
+*/
+#define BD_ENET_TX_READY        ((ushort)0x8000)
+#define BD_ENET_TX_PAD          ((ushort)0x4000)
+#define BD_ENET_TX_WRAP         ((ushort)0x2000)
+#define BD_ENET_TX_INTR         ((ushort)0x1000)
+#define BD_ENET_TX_LAST         ((ushort)0x0800)
+#define BD_ENET_TX_TC           ((ushort)0x0400)
+#define BD_ENET_TX_DEF          ((ushort)0x0200)
+#define BD_ENET_TX_HB           ((ushort)0x0100)
+#define BD_ENET_TX_LC           ((ushort)0x0080)
+#define BD_ENET_TX_RL           ((ushort)0x0040)
+#define BD_ENET_TX_RCMASK       ((ushort)0x003c)
+#define BD_ENET_TX_UN           ((ushort)0x0002)
+#define BD_ENET_TX_CSL          ((ushort)0x0001)
+#define BD_ENET_TX_STATS        ((ushort)0x03ff)        /* All status bits */
+
+/* SCC as UART
+*/
+typedef struct scc_uart {
+        sccp_t  scc_genscc;
+        uint    scc_res1;       /* Reserved */
+        uint    scc_res2;       /* Reserved */
+        ushort  scc_maxidl;     /* Maximum idle chars */
+        ushort  scc_idlc;       /* temp idle counter */
+        ushort  scc_brkcr;      /* Break count register */
+        ushort  scc_parec;      /* receive parity error counter */
+        ushort  scc_frmec;      /* receive framing error counter */
+        ushort  scc_nosec;      /* receive noise counter */
+        ushort  scc_brkec;      /* receive break condition counter */
+        ushort  scc_brkln;      /* last received break length */
+        ushort  scc_uaddr1;     /* UART address character 1 */
+        ushort  scc_uaddr2;     /* UART address character 2 */
+        ushort  scc_rtemp;      /* Temp storage */
+        ushort  scc_toseq;      /* Transmit out of sequence char */
+        ushort  scc_char1;      /* control character 1 */
+        ushort  scc_char2;      /* control character 2 */
+        ushort  scc_char3;      /* control character 3 */
+        ushort  scc_char4;      /* control character 4 */
+        ushort  scc_char5;      /* control character 5 */
+        ushort  scc_char6;      /* control character 6 */
+        ushort  scc_char7;      /* control character 7 */
+        ushort  scc_char8;      /* control character 8 */
+        ushort  scc_rccm;       /* receive control character mask */
+        ushort  scc_rccr;       /* receive control character register */
+        ushort  scc_rlbc;       /* receive last break character */
+} scc_uart_t;
+
+/* SCC Event and Mask registers when it is used as a UART.
+*/
+#define UART_SCCM_GLR           ((ushort)0x1000)
+#define UART_SCCM_GLT           ((ushort)0x0800)
+#define UART_SCCM_AB            ((ushort)0x0200)
+#define UART_SCCM_IDL           ((ushort)0x0100)
+#define UART_SCCM_GRA           ((ushort)0x0080)
+#define UART_SCCM_BRKE          ((ushort)0x0040)
+#define UART_SCCM_BRKS          ((ushort)0x0020)
+#define UART_SCCM_CCR           ((ushort)0x0008)
+#define UART_SCCM_BSY           ((ushort)0x0004)
+#define UART_SCCM_TX            ((ushort)0x0002)
+#define UART_SCCM_RX            ((ushort)0x0001)
+
+/* The SCC PMSR when used as a UART.
+*/
+#define SCU_PMSR_FLC            ((ushort)0x8000)
+#define SCU_PMSR_SL             ((ushort)0x4000)
+#define SCU_PMSR_CL             ((ushort)0x3000)
+#define SCU_PMSR_UM             ((ushort)0x0c00)
+#define SCU_PMSR_FRZ            ((ushort)0x0200)
+#define SCU_PMSR_RZS            ((ushort)0x0100)
+#define SCU_PMSR_SYN            ((ushort)0x0080)
+#define SCU_PMSR_DRT            ((ushort)0x0040)
+#define SCU_PMSR_PEN            ((ushort)0x0010)
+#define SCU_PMSR_RPM            ((ushort)0x000c)
+#define SCU_PMSR_REVP           ((ushort)0x0008)
+#define SCU_PMSR_TPM            ((ushort)0x0003)
+#define SCU_PMSR_TEVP           ((ushort)0x0003)
+
+/* CPM Transparent mode SCC.
+ */
+typedef struct scc_trans {
+        sccp_t  st_genscc;
+        uint    st_cpres;       /* Preset CRC */
+        uint    st_cmask;       /* Constant mask for CRC */
+} scc_trans_t;
+
+#define BD_SCC_TX_LAST          ((ushort)0x0800)
+
+
+
+/* CPM interrupts.  There are nearly 32 interrupts generated by CPM
+ * channels or devices.  All of these are presented to the PPC core
+ * as a single interrupt.  The CPM interrupt handler dispatches its
+ * own handlers, in a similar fashion to the PPC core handler.  We
+ * use the table as defined in the manuals (i.e. no special high
+ * priority and SCC1 == SCCa, etc...).
+ */
+/* #define CPMVEC_NR            32 */
+/* #define      CPMVEC_PIO_PC15         ((ushort)0x1f) */
+/* #define      CPMVEC_SCC1             ((ushort)0x1e) */
+/* #define      CPMVEC_SCC2             ((ushort)0x1d) */
+/* #define      CPMVEC_SCC3             ((ushort)0x1c) */
+/* #define      CPMVEC_SCC4             ((ushort)0x1b) */
+/* #define      CPMVEC_PIO_PC14         ((ushort)0x1a) */
+/* #define      CPMVEC_TIMER1           ((ushort)0x19) */
+/* #define      CPMVEC_PIO_PC13         ((ushort)0x18) */
+/* #define      CPMVEC_PIO_PC12         ((ushort)0x17) */
+/* #define      CPMVEC_SDMA_CB_ERR      ((ushort)0x16) */
+/* #define CPMVEC_IDMA1         ((ushort)0x15) */
+/* #define CPMVEC_IDMA2         ((ushort)0x14) */
+/* #define CPMVEC_TIMER2                ((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER     ((ushort)0x11) */
+/* #define CPMVEC_I2C           ((ushort)0x10) */
+/* #define      CPMVEC_PIO_PC11         ((ushort)0x0f) */
+/* #define      CPMVEC_PIO_PC10         ((ushort)0x0e) */
+/* #define CPMVEC_TIMER3                ((ushort)0x0c) */
+/* #define      CPMVEC_PIO_PC9          ((ushort)0x0b) */
+/* #define      CPMVEC_PIO_PC8          ((ushort)0x0a) */
+/* #define      CPMVEC_PIO_PC7          ((ushort)0x09) */
+/* #define CPMVEC_TIMER4                ((ushort)0x07) */
+/* #define      CPMVEC_PIO_PC6          ((ushort)0x06) */
+/* #define      CPMVEC_SPI              ((ushort)0x05) */
+/* #define      CPMVEC_SMC1             ((ushort)0x04) */
+/* #define      CPMVEC_SMC2             ((ushort)0x03) */
+/* #define      CPMVEC_PIO_PC5          ((ushort)0x02) */
+/* #define      CPMVEC_PIO_PC4          ((ushort)0x01) */
+/* #define      CPMVEC_ERROR            ((ushort)0x00) */
+
+extern void cpm_install_handler(int vec, void (*handler)(void *), void *dev_id);
+
+/* CPM interrupt configuration vector.
+*/
+#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
+#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
+#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
+#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
+#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
+#define CICR_IEN                ((uint)0x00000080)      /* Int. enable */
+#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
+#endif /* __CPM_360__ */
diff --git a/arch/m68k/include/asm/contregs.h b/arch/m68k/include/asm/contregs.h
new file mode 100644
index 000000000000..d1ea750bddfe
--- /dev/null
+++ b/arch/m68k/include/asm/contregs.h
@@ -0,0 +1,53 @@
+#ifndef _M68K_CONTREGS_H
+#define _M68K_CONTREGS_H
+
+/* contregs.h:  Addresses of registers in the ASI_CONTROL alternate address
+ *              space. These are for the mmu's context register, etc.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+/* 3=sun3
+   4=sun4 (as in sun4 sysmaint student book)
+   c=sun4c (according to davem) */
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Not cleared on read, byte.        */
+#define AC_SYNC_ERR   0x60000000    /*  c fault type                         */
+#define AC_SYNC_VA    0x60000004    /*  c fault virtual address              */
+#define AC_ASYNC_ERR  0x60000008    /*  c asynchronous fault type            */
+#define AC_ASYNC_VA   0x6000000c    /*  c async fault virtual address        */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4  Not used on Sun boards, byte       */
+#define AC_VME_VECTOR 0xE0000000    /* 4  For non-Autovector VME, byte       */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+/* s=Swift, h=Ross_HyperSPARC, v=TI_Viking, t=Tsunami, r=Ross_Cypress        */
+#define AC_M_PCR      0x0000        /* shv Processor Control Reg             */
+#define AC_M_CTPR     0x0100        /* shv Context Table Pointer Reg         */
+#define AC_M_CXR      0x0200        /* shv Context Register                  */
+#define AC_M_SFSR     0x0300        /* shv Synchronous Fault Status Reg      */
+#define AC_M_SFAR     0x0400        /* shv Synchronous Fault Address Reg     */
+#define AC_M_AFSR     0x0500        /*  hv Asynchronous Fault Status Reg     */
+#define AC_M_AFAR     0x0600        /*  hv Asynchronous Fault Address Reg    */
+#define AC_M_RESET    0x0700        /*  hv Reset Reg                         */
+#define AC_M_RPR      0x1000        /*  hv Root Pointer Reg                  */
+#define AC_M_TSUTRCR  0x1000        /* s   TLB Replacement Ctrl Reg          */
+#define AC_M_IAPTP    0x1100        /*  hv Instruction Access PTP            */
+#define AC_M_DAPTP    0x1200        /*  hv Data Access PTP                   */
+#define AC_M_ITR      0x1300        /*  hv Index Tag Register                */
+#define AC_M_TRCR     0x1400        /*  hv TLB Replacement Control Reg       */
+#define AC_M_SFSRX    0x1300        /* s   Synch Fault Status Reg prim       */
+#define AC_M_SFARX    0x1400        /* s   Synch Fault Address Reg prim      */
+#define AC_M_RPR1     0x1500        /*  h  Root Pointer Reg (entry 2)        */
+#define AC_M_IAPTP1   0x1600        /*  h  Instruction Access PTP (entry 2)  */
+#define AC_M_DAPTP1   0x1700        /*  h  Data Access PTP (entry 2)         */
+
+#endif /* _M68K_CONTREGS_H */
diff --git a/arch/m68k/include/asm/cputime.h b/arch/m68k/include/asm/cputime.h
new file mode 100644
index 000000000000..c79c5e892305
--- /dev/null
+++ b/arch/m68k/include/asm/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __M68K_CPUTIME_H
+#define __M68K_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __M68K_CPUTIME_H */
diff --git a/arch/m68k/include/asm/current.h b/arch/m68k/include/asm/current.h
new file mode 100644
index 000000000000..51b056dfaedd
--- /dev/null
+++ b/arch/m68k/include/asm/current.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "current_no.h"
+#else
+#include "current_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/current_mm.h b/arch/m68k/include/asm/current_mm.h
new file mode 100644
index 000000000000..8de8f8ceda61
--- /dev/null
+++ b/arch/m68k/include/asm/current_mm.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_CURRENT_H
+#define _M68K_CURRENT_H
+
+register struct task_struct *current __asm__("%a2");
+
+#endif /* !(_M68K_CURRENT_H) */
diff --git a/arch/m68k/include/asm/current_no.h b/arch/m68k/include/asm/current_no.h
new file mode 100644
index 000000000000..53ee0f9f7cef
--- /dev/null
+++ b/arch/m68k/include/asm/current_no.h
@@ -0,0 +1,24 @@
+#ifndef _M68KNOMMU_CURRENT_H
+#define _M68KNOMMU_CURRENT_H
+/*
+ *      current.h
+ *      (C) Copyright 2000, Lineo, David McCullough <davidm@uclinux.org>
+ *      (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ *
+ *      rather than dedicate a register (as the m68k source does), we
+ *      just keep a global,  we should probably just change it all to be
+ *      current and lose _current_task.
+ */
+
+#include <linux/thread_info.h>
+
+struct task_struct;
+
+static inline struct task_struct *get_current(void)
+{
+        return(current_thread_info()->task);
+}
+
+#define current get_current()
+
+#endif /* _M68KNOMMU_CURRENT_H */
diff --git a/arch/m68k/include/asm/dbg.h b/arch/m68k/include/asm/dbg.h
new file mode 100644
index 000000000000..27af3270f671
--- /dev/null
+++ b/arch/m68k/include/asm/dbg.h
@@ -0,0 +1,6 @@
+#define DEBUG 1
+#ifdef CONFIG_COLDFIRE
+#define BREAK asm volatile ("halt")
+#else
+#define BREAK *(volatile unsigned char *)0xdeadbee0 = 0
+#endif
diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h
new file mode 100644
index 000000000000..d2598e3dd7b2
--- /dev/null
+++ b/arch/m68k/include/asm/delay.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "delay_no.h"
+#else
+#include "delay_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/delay_mm.h b/arch/m68k/include/asm/delay_mm.h
new file mode 100644
index 000000000000..5ed92851bc6f
--- /dev/null
+++ b/arch/m68k/include/asm/delay_mm.h
@@ -0,0 +1,57 @@
+#ifndef _M68K_DELAY_H
+#define _M68K_DELAY_H
+
+#include <asm/param.h>
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ *
+ * Delay routines, using a pre-computed "loops_per_jiffy" value.
+ */
+
+static inline void __delay(unsigned long loops)
+{
+        __asm__ __volatile__ ("1: subql #1,%0; jcc 1b"
+                : "=d" (loops) : "0" (loops));
+}
+
+extern void __bad_udelay(void);
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+static inline void __const_udelay(unsigned long xloops)
+{
+        unsigned long tmp;
+
+        __asm__ ("mulul %2,%0:%1"
+                : "=d" (xloops), "=d" (tmp)
+                : "d" (xloops), "1" (loops_per_jiffy));
+        __delay(xloops * HZ);
+}
+
+static inline void __udelay(unsigned long usecs)
+{
+        __const_udelay(usecs * 4295);   /* 2**32 / 1000000 */
+}
+
+#define udelay(n) (__builtin_constant_p(n) ? \
+        ((n) > 20000 ? __bad_udelay() : __const_udelay((n) * 4295)) : \
+        __udelay(n))
+
+static inline unsigned long muldiv(unsigned long a, unsigned long b,
+                                   unsigned long c)
+{
+        unsigned long tmp;
+
+        __asm__ ("mulul %2,%0:%1; divul %3,%0:%1"
+                : "=d" (tmp), "=d" (a)
+                : "d" (b), "d" (c), "1" (a));
+        return a;
+}
+
+#endif /* defined(_M68K_DELAY_H) */
diff --git a/arch/m68k/include/asm/delay_no.h b/arch/m68k/include/asm/delay_no.h
new file mode 100644
index 000000000000..55cbd6294ab6
--- /dev/null
+++ b/arch/m68k/include/asm/delay_no.h
@@ -0,0 +1,76 @@
+#ifndef _M68KNOMMU_DELAY_H
+#define _M68KNOMMU_DELAY_H
+
+/*
+ * Copyright (C) 1994 Hamish Macdonald
+ * Copyright (C) 2004 Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/param.h>
+
+static inline void __delay(unsigned long loops)
+{
+#if defined(CONFIG_COLDFIRE)
+        /* The coldfire runs this loop at significantly different speeds
+         * depending upon long word alignment or not.  We'll pad it to
+         * long word alignment which is the faster version.
+         * The 0x4a8e is of course a 'tstl %fp' instruction.  This is better
+         * than using a NOP (0x4e71) instruction because it executes in one
+         * cycle not three and doesn't allow for an arbitary delay waiting
+         * for bus cycles to finish.  Also fp/a6 isn't likely to cause a
+         * stall waiting for the register to become valid if such is added
+         * to the coldfire at some stage.
+         */
+        __asm__ __volatile__ (  ".balignw 4, 0x4a8e\n\t"
+                                "1: subql #1, %0\n\t"
+                                "jcc 1b"
+                : "=d" (loops) : "0" (loops));
+#else
+        __asm__ __volatile__ (  "1: subql #1, %0\n\t"
+                                "jcc 1b"
+                : "=d" (loops) : "0" (loops));
+#endif
+}
+
+/*
+ *      Ideally we use a 32*32->64 multiply to calculate the number of
+ *      loop iterations, but the older standard 68k and ColdFire do not
+ *      have this instruction. So for them we have a clsoe approximation
+ *      loop using 32*32->32 multiplies only. This calculation based on
+ *      the ARM version of delay.
+ *
+ *      We want to implement:
+ *
+ *      loops = (usecs * 0x10c6 * HZ * loops_per_jiffy) / 2^32
+ */
+
+#define HZSCALE         (268435456 / (1000000/HZ))
+
+extern unsigned long loops_per_jiffy;
+
+static inline void _udelay(unsigned long usecs)
+{
+#if defined(CONFIG_M68328) || defined(CONFIG_M68EZ328) || \
+    defined(CONFIG_M68VZ328) || defined(CONFIG_M68360) || \
+    defined(CONFIG_COLDFIRE)
+        __delay((((usecs * HZSCALE) >> 11) * (loops_per_jiffy >> 11)) >> 6);
+#else
+        unsigned long tmp;
+
+        usecs *= 4295;          /* 2**32 / 1000000 */
+        __asm__ ("mulul %2,%0:%1"
+                : "=d" (usecs), "=d" (tmp)
+                : "d" (usecs), "1" (loops_per_jiffy*HZ));
+        __delay(usecs);
+#endif
+}
+
+/*
+ *      Moved the udelay() function into library code, no longer inlined.
+ *      I had to change the algorithm because we are overflowing now on
+ *      the faster ColdFire parts. The code is a little bigger, so it makes
+ *      sense to library it.
+ */
+extern void udelay(unsigned long usecs);
+
+#endif /* defined(_M68KNOMMU_DELAY_H) */
diff --git a/arch/m68k/include/asm/device.h b/arch/m68k/include/asm/device.h
new file mode 100644
index 000000000000..d8f9872b0e2d
--- /dev/null
+++ b/arch/m68k/include/asm/device.h
@@ -0,0 +1,7 @@
+/*
+ * Arch specific extensions to struct device
+ *
+ * This file is released under the GPLv2
+ */
+#include <asm-generic/device.h>
+
diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h
new file mode 100644
index 000000000000..d211d9f54276
--- /dev/null
+++ b/arch/m68k/include/asm/div64.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "div64_no.h"
+#else
+#include "div64_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/div64_mm.h b/arch/m68k/include/asm/div64_mm.h
new file mode 100644
index 000000000000..8243c931b5c0
--- /dev/null
+++ b/arch/m68k/include/asm/div64_mm.h
@@ -0,0 +1,28 @@
+#ifndef _M68K_DIV64_H
+#define _M68K_DIV64_H
+
+#include <linux/types.h>
+
+/* n = n / base; return rem; */
+
+#define do_div(n, base) ({                                      \
+        union {                                                 \
+                unsigned long n32[2];                           \
+                unsigned long long n64;                         \
+        } __n;                                                  \
+        unsigned long __rem, __upper;                           \
+                                                                \
+        __n.n64 = (n);                                          \
+        if ((__upper = __n.n32[0])) {                           \
+                asm ("divul.l %2,%1:%0"                         \
+                        : "=d" (__n.n32[0]), "=d" (__upper)     \
+                        : "d" (base), "0" (__n.n32[0]));        \
+        }                                                       \
+        asm ("divu.l %2,%1:%0"                                  \
+                : "=d" (__n.n32[1]), "=d" (__rem)               \
+                : "d" (base), "1" (__upper), "0" (__n.n32[1])); \
+        (n) = __n.n64;                                          \
+        __rem;                                                  \
+})
+
+#endif /* _M68K_DIV64_H */
diff --git a/arch/m68k/include/asm/div64_no.h b/arch/m68k/include/asm/div64_no.h
new file mode 100644
index 000000000000..6cd978cefb28
--- /dev/null
+++ b/arch/m68k/include/asm/div64_no.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h
new file mode 100644
index 000000000000..f4a4c7638f89
--- /dev/null
+++ b/arch/m68k/include/asm/dma-mapping.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma-mapping_no.h"
+#else
+#include "dma-mapping_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/dma-mapping_mm.h b/arch/m68k/include/asm/dma-mapping_mm.h
new file mode 100644
index 000000000000..26f505488c11
--- /dev/null
+++ b/arch/m68k/include/asm/dma-mapping_mm.h
@@ -0,0 +1,112 @@
+#ifndef _M68K_DMA_MAPPING_H
+#define _M68K_DMA_MAPPING_H
+
+#include <asm/cache.h>
+
+struct scatterlist;
+
+#ifndef CONFIG_MMU_SUN3
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+        return 1;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+        return 0;
+}
+
+static inline int dma_get_cache_alignment(void)
+{
+        return 1 << L1_CACHE_SHIFT;
+}
+
+static inline int dma_is_consistent(struct device *dev, dma_addr_t dma_addr)
+{
+        return 0;
+}
+
+extern void *dma_alloc_coherent(struct device *, size_t,
+                                dma_addr_t *, gfp_t);
+extern void dma_free_coherent(struct device *, size_t,
+                              void *, dma_addr_t);
+
+static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
+                                          dma_addr_t *handle, gfp_t flag)
+{
+        return dma_alloc_coherent(dev, size, handle, flag);
+}
+static inline void dma_free_noncoherent(struct device *dev, size_t size,
+                                        void *addr, dma_addr_t handle)
+{
+        dma_free_coherent(dev, size, addr, handle);
+}
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+                                  enum dma_data_direction dir)
+{
+        /* we use coherent allocation, so not much to do here. */
+}
+
+extern dma_addr_t dma_map_single(struct device *, void *, size_t,
+                                 enum dma_data_direction);
+static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
+                                    size_t size, enum dma_data_direction dir)
+{
+}
+
+extern dma_addr_t dma_map_page(struct device *, struct page *,
+                               unsigned long, size_t size,
+                               enum dma_data_direction);
+static inline void dma_unmap_page(struct device *dev, dma_addr_t address,
+                                  size_t size, enum dma_data_direction dir)
+{
+}
+
+extern int dma_map_sg(struct device *, struct scatterlist *, int,
+                      enum dma_data_direction);
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+                                int nhwentries, enum dma_data_direction dir)
+{
+}
+
+extern void dma_sync_single_for_device(struct device *, dma_addr_t, size_t,
+                                       enum dma_data_direction);
+extern void dma_sync_sg_for_device(struct device *, struct scatterlist *, int,
+                                   enum dma_data_direction);
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+                dma_addr_t dma_handle, unsigned long offset, size_t size,
+                enum dma_data_direction direction)
+{
+        /* just sync everything for now */
+        dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
+}
+
+static inline void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle,
+                                           size_t size, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+                                       int nents, enum dma_data_direction dir)
+{
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+                dma_addr_t dma_handle, unsigned long offset, size_t size,
+                enum dma_data_direction direction)
+{
+        /* just sync everything for now */
+        dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t handle)
+{
+        return 0;
+}
+
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif  /* _M68K_DMA_MAPPING_H */
diff --git a/arch/m68k/include/asm/dma-mapping_no.h b/arch/m68k/include/asm/dma-mapping_no.h
new file mode 100644
index 000000000000..6aeab18e58bd
--- /dev/null
+++ b/arch/m68k/include/asm/dma-mapping_no.h
@@ -0,0 +1,10 @@
+#ifndef _M68KNOMMU_DMA_MAPPING_H
+#define _M68KNOMMU_DMA_MAPPING_H
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif  /* _M68KNOMMU_DMA_MAPPING_H */
diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h
new file mode 100644
index 000000000000..b82e660cf1c2
--- /dev/null
+++ b/arch/m68k/include/asm/dma.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "dma_no.h"
+#else
+#include "dma_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/dma_mm.h b/arch/m68k/include/asm/dma_mm.h
new file mode 100644
index 000000000000..4240fbc946f8
--- /dev/null
+++ b/arch/m68k/include/asm/dma_mm.h
@@ -0,0 +1,16 @@
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+
+
+/* it's useless on the m68k, but unfortunately needed by the new
+   bootmem allocator (but this should do it for this) */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+#define MAX_DMA_CHANNELS 8
+
+extern int request_dma(unsigned int dmanr, const char * device_id);     /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);       /* release it again */
+
+#define isa_dma_bridge_buggy    (0)
+
+#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dma_no.h b/arch/m68k/include/asm/dma_no.h
new file mode 100644
index 000000000000..939a02056217
--- /dev/null
+++ b/arch/m68k/include/asm/dma_no.h
@@ -0,0 +1,494 @@
+#ifndef _M68K_DMA_H
+#define _M68K_DMA_H 1
+ 
+//#define       DMA_DEBUG       1
+
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * ColdFire DMA Model:
+ *   ColdFire DMA supports two forms of DMA: Single and Dual address. Single
+ * address mode emits a source address, and expects that the device will either
+ * pick up the data (DMA READ) or source data (DMA WRITE). This implies that
+ * the device will place data on the correct byte(s) of the data bus, as the
+ * memory transactions are always 32 bits. This implies that only 32 bit
+ * devices will find single mode transfers useful. Dual address DMA mode
+ * performs two cycles: source read and destination write. ColdFire will
+ * align the data so that the device will always get the correct bytes, thus
+ * is useful for 8 and 16 bit devices. This is the mode that is supported
+ * below.
+ *
+ * AUG/22/2000 : added support for 32-bit Dual-Address-Mode (K) 2000 
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * AUG/25/2000 : addad support for 8, 16 and 32-bit Single-Address-Mode (K)2000
+ *               Oliver Kamphenkel (O.Kamphenkel@tu-bs.de)
+ *
+ * APR/18/2002 : added proper support for MCF5272 DMA controller.
+ *               Arthur Shipkowski (art@videon-central.com)
+ */
+
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfdma.h>
+
+/*
+ * Set number of channels of DMA on ColdFire for different implementations.
+ */
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407) || \
+        defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MAX_M68K_DMA_CHANNELS 4
+#elif defined(CONFIG_M5272)
+#define MAX_M68K_DMA_CHANNELS 1
+#elif defined(CONFIG_M532x)
+#define MAX_M68K_DMA_CHANNELS 0
+#else
+#define MAX_M68K_DMA_CHANNELS 2
+#endif
+
+extern unsigned int dma_base_addr[MAX_M68K_DMA_CHANNELS];
+extern unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS];
+
+#if !defined(CONFIG_M5272)
+#define DMA_MODE_WRITE_BIT  0x01  /* Memory/IO to IO/Memory select */
+#define DMA_MODE_WORD_BIT   0x02  /* 8 or 16 bit transfers */
+#define DMA_MODE_LONG_BIT   0x04  /* or 32 bit transfers */
+#define DMA_MODE_SINGLE_BIT 0x08  /* single-address-mode */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ               0
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE              1
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD          2
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         3
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG          4
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         5
+/* I/O to memory, 8 bits, single-address-mode */     
+#define DMA_MODE_READ_SINGLE        8
+/* memory to I/O, 8 bits, single-address-mode */
+#define DMA_MODE_WRITE_SINGLE       9
+/* I/O to memory, 16 bits, single-address-mode */
+#define DMA_MODE_READ_WORD_SINGLE  10
+/* memory to I/O, 16 bits, single-address-mode */
+#define DMA_MODE_WRITE_WORD_SINGLE 11
+/* I/O to memory, 32 bits, single-address-mode */
+#define DMA_MODE_READ_LONG_SINGLE  12
+/* memory to I/O, 32 bits, single-address-mode */
+#define DMA_MODE_WRITE_LONG_SINGLE 13
+
+#else /* CONFIG_M5272 is defined */
+
+/* Source static-address mode */
+#define DMA_MODE_SRC_SA_BIT 0x01  
+/* Two bits to select between all four modes */
+#define DMA_MODE_SSIZE_MASK 0x06 
+/* Offset to shift bits in */
+#define DMA_MODE_SSIZE_OFF  0x01  
+/* Destination static-address mode */
+#define DMA_MODE_DES_SA_BIT 0x10  
+/* Two bits to select between all four modes */
+#define DMA_MODE_DSIZE_MASK 0x60  
+/* Offset to shift bits in */
+#define DMA_MODE_DSIZE_OFF  0x05
+/* Size modifiers */
+#define DMA_MODE_SIZE_LONG  0x00
+#define DMA_MODE_SIZE_BYTE  0x01
+#define DMA_MODE_SIZE_WORD  0x02
+#define DMA_MODE_SIZE_LINE  0x03
+
+/* 
+ * Aliases to help speed quick ports; these may be suboptimal, however. They
+ * do not include the SINGLE mode modifiers since the MCF5272 does not have a
+ * mode where the device is in control of its addressing.
+ */
+
+/* I/O to memory, 8 bits, mode */
+#define DMA_MODE_READ                 ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 8 bits, mode */
+#define DMA_MODE_WRITE              ((DMA_MODE_SIZE_BYTE << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_BYTE << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 16 bits, mode */
+#define DMA_MODE_READ_WORD              ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 16 bits, mode */
+#define DMA_MODE_WRITE_WORD         ((DMA_MODE_SIZE_WORD << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_WORD << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+/* I/O to memory, 32 bits, mode */
+#define DMA_MODE_READ_LONG              ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_SRC_SA_BIT)
+/* memory to I/O, 32 bits, mode */
+#define DMA_MODE_WRITE_LONG         ((DMA_MODE_SIZE_LONG << DMA_MODE_DSIZE_OFF) | (DMA_MODE_SIZE_LONG << DMA_MODE_SSIZE_OFF) | DMA_DES_SA_BIT)
+
+#endif /* !defined(CONFIG_M5272) */
+
+#if !defined(CONFIG_M5272)
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_DCR] |= MCFDMA_DCR_EEXT;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned char  *dmapb;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmapb = (unsigned char *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmawp[MCFDMA_DCR] &= ~MCFDMA_DCR_EEXT;
+  dmapb[MCFDMA_DSR] = MCFDMA_DSR_DONE;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned char  *dmabp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+
+  dmabp = (unsigned char *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmabp[MCFDMA_DSR] = MCFDMA_DSR_DONE; 
+
+  // Set command register
+  dmawp[MCFDMA_DCR] =
+    MCFDMA_DCR_INT |         // Enable completion irq
+    MCFDMA_DCR_CS |          // Force one xfer per request
+    MCFDMA_DCR_AA |          // Enable auto alignment
+    // single-address-mode
+    ((mode & DMA_MODE_SINGLE_BIT) ? MCFDMA_DCR_SAA : 0) |
+    // sets s_rw (-> r/w) high if Memory to I/0
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_S_RW : 0) |
+    // Memory to I/O or I/O to Memory
+    ((mode & DMA_MODE_WRITE_BIT) ? MCFDMA_DCR_SINC : MCFDMA_DCR_DINC) |
+    // 32 bit, 16 bit or 8 bit transfers
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_SSIZE_WORD : 
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_SSIZE_LONG :
+                                   MCFDMA_DCR_SSIZE_BYTE)) |
+    ((mode & DMA_MODE_WORD_BIT)  ? MCFDMA_DCR_DSIZE_WORD :
+     ((mode & DMA_MODE_LONG_BIT) ? MCFDMA_DCR_DSIZE_LONG :
+                                   MCFDMA_DCR_DSIZE_BYTE));
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DSR[%x]=%x DCR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmabp[MCFDMA_DSR], dmabp[MCFDMA_DSR],
+         (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned short *dmawp;
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmawp[MCFDMA_DCR] & MCFDMA_DCR_SINC) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_SAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_SAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DCR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+        __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DCR], dmawp[MCFDMA_DCR],
+        (int) &dmalp[MCFDMA_SAR], dmalp[MCFDMA_SAR],
+        (int) &dmalp[MCFDMA_DAR], dmalp[MCFDMA_DAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  dmawp[MCFDMA_BCR] = (unsigned short)count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned short *dmawp;
+  unsigned short count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+  count = dmawp[MCFDMA_BCR];
+  return((int) count);
+}
+#else /* CONFIG_M5272 is defined */
+
+/*
+ * The MCF5272 DMA controller is very different than the controller defined above
+ * in terms of register mapping.  For instance, with the exception of the 16-bit 
+ * interrupt register (IRQ#85, for reference), all of the registers are 32-bit.
+ *
+ * The big difference, however, is the lack of device-requested DMA.  All modes
+ * are dual address transfer, and there is no 'device' setup or direction bit.
+ * You can DMA between a device and memory, between memory and memory, or even between
+ * two devices directly, with any combination of incrementing and non-incrementing
+ * addresses you choose.  This puts a crimp in distinguishing between the 'device 
+ * address' set up by set_dma_device_addr.
+ *
+ * Therefore, there are two options.  One is to use set_dma_addr and set_dma_device_addr,
+ * which will act exactly as above in -- it will look to see if the source is set to
+ * autoincrement, and if so it will make the source use the set_dma_addr value and the
+ * destination the set_dma_device_addr value.  Otherwise the source will be set to the
+ * set_dma_device_addr value and the destination will get the set_dma_addr value.
+ *
+ * The other is to use the provided set_dma_src_addr and set_dma_dest_addr functions
+ * and make it explicit.  Depending on what you're doing, one of these two should work
+ * for you, but don't mix them in the same transfer setup.
+ */
+
+/* enable/disable a specific DMA channel */
+static __inline__ void enable_dma(unsigned int dmanr)
+{
+  volatile unsigned int  *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("enable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_EN;
+}
+
+static __inline__ void disable_dma(unsigned int dmanr)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("disable_dma(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  /* Turn off external requests, and stop any DMA in progress */
+  dmalp[MCFDMA_DMR] &= ~MCFDMA_DMR_EN;
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET;
+}
+
+/*
+ * Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while interrupts are disabled! ---
+ *
+ * This is a NOP for ColdFire. Provide a stub for compatibility.
+ */
+static __inline__ void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static __inline__ void set_dma_mode(unsigned int dmanr, char mode)
+{
+
+  volatile unsigned int   *dmalp;
+  volatile unsigned short *dmawp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_mode(dmanr=%d,mode=%d)\n", dmanr, mode);
+#endif
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmawp = (unsigned short *) dma_base_addr[dmanr];
+
+  // Clear config errors
+  dmalp[MCFDMA_DMR] |= MCFDMA_DMR_RESET; 
+
+  // Set command register
+  dmalp[MCFDMA_DMR] =
+    MCFDMA_DMR_RQM_DUAL |         // Mandatory Request Mode setting
+    MCFDMA_DMR_DSTT_SD  |         // Set up addressing types; set to supervisor-data.
+    MCFDMA_DMR_SRCT_SD  |         // Set up addressing types; set to supervisor-data. 
+    // source static-address-mode
+    ((mode & DMA_MODE_SRC_SA_BIT) ? MCFDMA_DMR_SRCM_SA : MCFDMA_DMR_SRCM_IA) |
+    // dest static-address-mode
+    ((mode & DMA_MODE_DES_SA_BIT) ? MCFDMA_DMR_DSTM_SA : MCFDMA_DMR_DSTM_IA) |
+    // burst, 32 bit, 16 bit or 8 bit transfers are separately configurable on the MCF5272
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_DSTS_OFF) |
+    (((mode & DMA_MODE_SSIZE_MASK) >> DMA_MODE_SSIZE_OFF) << MCFDMA_DMR_SRCS_OFF);
+    
+  dmawp[MCFDMA_DIR] |= MCFDMA_DIR_ASCEN;   /* Enable completion interrupts */
+  
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x DIR[%x]=%x\n", __FILE__, __LINE__,
+         dmanr, (int) &dmalp[MCFDMA_DMR], dmabp[MCFDMA_DMR],
+         (int) &dmawp[MCFDMA_DIR], dmawp[MCFDMA_DIR]);
+#endif
+}
+
+/* Set transfer address for specific DMA channel */
+static __inline__ void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+  volatile unsigned int   *dmalp;
+
+#ifdef DMA_DEBUG
+  printk("set_dma_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+
+  // Determine which address registers are used for memory/device accesses
+  if (dmalp[MCFDMA_DMR] & MCFDMA_DMR_SRCM) {
+    // Source incrementing, must be memory
+    dmalp[MCFDMA_DSAR] = a;
+    // Set dest address, must be device
+    dmalp[MCFDMA_DDAR] = dma_device_address[dmanr];
+  } else {
+    // Destination incrementing, must be memory
+    dmalp[MCFDMA_DDAR] = a;
+    // Set source address, must be device
+    dmalp[MCFDMA_DSAR] = dma_device_address[dmanr];
+  }
+
+#ifdef DEBUG_DMA
+  printk("%s(%d): dmanr=%d DMR[%x]=%x SAR[%x]=%08x DAR[%x]=%08x\n",
+        __FILE__, __LINE__, dmanr, (int) &dmawp[MCFDMA_DMR], dmawp[MCFDMA_DMR],
+        (int) &dmalp[MCFDMA_DSAR], dmalp[MCFDMA_DSAR],
+        (int) &dmalp[MCFDMA_DDAR], dmalp[MCFDMA_DDAR]);
+#endif
+}
+
+/*
+ * Specific for Coldfire - sets device address.
+ * Should be called after the mode set call, and before set DMA address.
+ */
+static __inline__ void set_dma_device_addr(unsigned int dmanr, unsigned int a)
+{
+#ifdef DMA_DEBUG
+  printk("set_dma_device_addr(dmanr=%d,a=%x)\n", dmanr, a);
+#endif
+
+  dma_device_address[dmanr] = a;
+}
+
+/*
+ * NOTE 2: "count" represents _bytes_.
+ *
+ * NOTE 3: While a 32-bit register, "count" is only a maximum 24-bit value.
+ */
+static __inline__ void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+  volatile unsigned int *dmalp;
+  
+#ifdef DMA_DEBUG
+  printk("set_dma_count(dmanr=%d,count=%d)\n", dmanr, count);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  dmalp[MCFDMA_DBCR] = count;
+}
+
+/*
+ * Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ */
+static __inline__ int get_dma_residue(unsigned int dmanr)
+{
+  volatile unsigned int *dmalp;
+  unsigned int count;
+
+#ifdef DMA_DEBUG
+  printk("get_dma_residue(dmanr=%d)\n", dmanr);
+#endif
+
+  dmalp = (unsigned int *) dma_base_addr[dmanr];
+  count = dmalp[MCFDMA_DBCR];
+  return(count);
+}
+
+#endif /* !defined(CONFIG_M5272) */
+#endif /* CONFIG_COLDFIRE */
+ 
+#define MAX_DMA_CHANNELS 8
+
+/* Don't define MAX_DMA_ADDRESS; it's useless on the m68k/coldfire and any
+   occurrence should be flagged as an error.  */
+/* under 2.4 it is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);      /* reserve a DMA channel */
+extern void free_dma(unsigned int dmanr);       /* release it again */
+ 
+#endif /* _M68K_DMA_H */
diff --git a/arch/m68k/include/asm/dsp56k.h b/arch/m68k/include/asm/dsp56k.h
new file mode 100644
index 000000000000..2d8c0c9f794b
--- /dev/null
+++ b/arch/m68k/include/asm/dsp56k.h
@@ -0,0 +1,35 @@
+/*
+ * linux/include/asm-m68k/dsp56k.h - defines and declarations for
+ *                                   DSP56k device driver
+ *
+ * Copyright (C) 1996,1997 Fredrik Noring, lars brinkhoff & Tomas Berndtsson
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+
+/* Used for uploading DSP binary code */
+struct dsp56k_upload {
+        int len;
+        char __user *bin;
+};
+
+/* For the DSP host flags */
+struct dsp56k_host_flags {
+        int dir;     /* Bit field. 1 = write output bit, 0 = do nothing.
+                      * 0x0000 means reading only, 0x0011 means
+                      * writing the bits stored in `out' on HF0 and HF1.
+                      * Note that HF2 and HF3 can only be read.
+                      */
+        int out;     /* Bit field like above. */
+        int status;  /* Host register's current state is returned */
+};
+
+/* ioctl command codes */
+#define DSP56K_UPLOAD           1    /* Upload DSP binary program       */
+#define DSP56K_SET_TX_WSIZE     2    /* Host transmit word size (1-4)   */
+#define DSP56K_SET_RX_WSIZE     3    /* Host receive word size (1-4)    */
+#define DSP56K_HOST_FLAGS       4    /* Host flag registers             */
+#define DSP56K_HOST_CMD         5    /* Trig Host Command (0-31)        */
diff --git a/arch/m68k/include/asm/dvma.h b/arch/m68k/include/asm/dvma.h
new file mode 100644
index 000000000000..890bbf7e7758
--- /dev/null
+++ b/arch/m68k/include/asm/dvma.h
@@ -0,0 +1,240 @@
+/*
+ * include/asm-m68k/dma.h
+ *
+ * Copyright 1995 (C) David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Hacked to fit Sun3x needs by Thomas Bogendoerfer
+ */
+
+#ifndef __M68K_DVMA_H
+#define __M68K_DVMA_H
+
+
+#define DVMA_PAGE_SHIFT 13
+#define DVMA_PAGE_SIZE  (1UL << DVMA_PAGE_SHIFT)
+#define DVMA_PAGE_MASK  (~(DVMA_PAGE_SIZE-1))
+#define DVMA_PAGE_ALIGN(addr)   ALIGN(addr, DVMA_PAGE_SIZE)
+
+extern void dvma_init(void);
+extern int dvma_map_iommu(unsigned long kaddr, unsigned long baddr,
+                          int len);
+
+#define dvma_malloc(x) dvma_malloc_align(x, 0)
+#define dvma_map(x, y) dvma_map_align(x, y, 0)
+#define dvma_map_vme(x, y) (dvma_map(x, y) & 0xfffff)
+#define dvma_map_align_vme(x, y, z) (dvma_map_align (x, y, z) & 0xfffff)
+extern unsigned long dvma_map_align(unsigned long kaddr, int len,
+                            int align);
+extern void *dvma_malloc_align(unsigned long len, unsigned long align);
+
+extern void dvma_unmap(void *baddr);
+extern void dvma_free(void *vaddr);
+
+
+#ifdef CONFIG_SUN3
+/* sun3 dvma page support */
+
+/* memory and pmegs potentially reserved for dvma */
+#define DVMA_PMEG_START 10
+#define DVMA_PMEG_END 16
+#define DVMA_START 0xf00000
+#define DVMA_END 0xfe0000
+#define DVMA_SIZE (DVMA_END-DVMA_START)
+#define IOMMU_TOTAL_ENTRIES 128
+#define IOMMU_ENTRIES 120
+
+/* empirical kludge -- dvma regions only seem to work right on 0x10000
+   byte boundaries */
+#define DVMA_REGION_SIZE 0x10000
+#define DVMA_ALIGN(addr) (((addr)+DVMA_REGION_SIZE-1) & \
+                         ~(DVMA_REGION_SIZE-1))
+
+/* virt <-> phys conversions */
+#define dvma_vtop(x) ((unsigned long)(x) & 0xffffff)
+#define dvma_ptov(x) ((unsigned long)(x) | 0xf000000)
+#define dvma_vtovme(x) ((unsigned long)(x) & 0x00fffff)
+#define dvma_vmetov(x) ((unsigned long)(x) | 0xff00000)
+#define dvma_vtob(x) dvma_vtop(x)
+#define dvma_btov(x) dvma_ptov(x)
+
+static inline int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr,
+                               int len)
+{
+        return 0;
+}
+
+#else /* Sun3x */
+
+/* sun3x dvma page support */
+
+#define DVMA_START 0x0
+#define DVMA_END 0xf00000
+#define DVMA_SIZE (DVMA_END-DVMA_START)
+#define IOMMU_TOTAL_ENTRIES        2048
+/* the prom takes the top meg */
+#define IOMMU_ENTRIES              (IOMMU_TOTAL_ENTRIES - 0x80)
+
+#define dvma_vtob(x) ((unsigned long)(x) & 0x00ffffff)
+#define dvma_btov(x) ((unsigned long)(x) | 0xff000000)
+
+extern int dvma_map_cpu(unsigned long kaddr, unsigned long vaddr, int len);
+
+
+
+/* everything below this line is specific to dma used for the onboard
+   ESP scsi on sun3x */
+
+/* Structure to describe the current status of DMA registers on the Sparc */
+struct sparc_dma_registers {
+  __volatile__ unsigned long cond_reg;  /* DMA condition register */
+  __volatile__ unsigned long st_addr;   /* Start address of this transfer */
+  __volatile__ unsigned long  cnt;      /* How many bytes to transfer */
+  __volatile__ unsigned long dma_test;  /* DMA test register */
+};
+
+/* DVMA chip revisions */
+enum dvma_rev {
+        dvmarev0,
+        dvmaesc1,
+        dvmarev1,
+        dvmarev2,
+        dvmarev3,
+        dvmarevplus,
+        dvmahme
+};
+
+#define DMA_HASCOUNT(rev)  ((rev)==dvmaesc1)
+
+/* Linux DMA information structure, filled during probe. */
+struct Linux_SBus_DMA {
+        struct Linux_SBus_DMA *next;
+        struct linux_sbus_device *SBus_dev;
+        struct sparc_dma_registers *regs;
+
+        /* Status, misc info */
+        int node;                /* Prom node for this DMA device */
+        int running;             /* Are we doing DMA now? */
+        int allocated;           /* Are we "owned" by anyone yet? */
+
+        /* Transfer information. */
+        unsigned long addr;      /* Start address of current transfer */
+        int nbytes;              /* Size of current transfer */
+        int realbytes;           /* For splitting up large transfers, etc. */
+
+        /* DMA revision */
+        enum dvma_rev revision;
+};
+
+extern struct Linux_SBus_DMA *dma_chain;
+
+/* Broken hardware... */
+#define DMA_ISBROKEN(dma)    ((dma)->revision == dvmarev1)
+#define DMA_ISESC1(dma)      ((dma)->revision == dvmaesc1)
+
+/* Fields in the cond_reg register */
+/* First, the version identification bits */
+#define DMA_DEVICE_ID    0xf0000000        /* Device identification bits */
+#define DMA_VERS0        0x00000000        /* Sunray DMA version */
+#define DMA_ESCV1        0x40000000        /* DMA ESC Version 1 */
+#define DMA_VERS1        0x80000000        /* DMA rev 1 */
+#define DMA_VERS2        0xa0000000        /* DMA rev 2 */
+#define DMA_VERHME       0xb0000000        /* DMA hme gate array */
+#define DMA_VERSPLUS     0x90000000        /* DMA rev 1 PLUS */
+
+#define DMA_HNDL_INTR    0x00000001        /* An IRQ needs to be handled */
+#define DMA_HNDL_ERROR   0x00000002        /* We need to take an error */
+#define DMA_FIFO_ISDRAIN 0x0000000c        /* The DMA FIFO is draining */
+#define DMA_INT_ENAB     0x00000010        /* Turn on interrupts */
+#define DMA_FIFO_INV     0x00000020        /* Invalidate the FIFO */
+#define DMA_ACC_SZ_ERR   0x00000040        /* The access size was bad */
+#define DMA_FIFO_STDRAIN 0x00000040        /* DMA_VERS1 Drain the FIFO */
+#define DMA_RST_SCSI     0x00000080        /* Reset the SCSI controller */
+#define DMA_RST_ENET     DMA_RST_SCSI      /* Reset the ENET controller */
+#define DMA_ST_WRITE     0x00000100        /* write from device to memory */
+#define DMA_ENABLE       0x00000200        /* Fire up DMA, handle requests */
+#define DMA_PEND_READ    0x00000400        /* DMA_VERS1/0/PLUS Pending Read */
+#define DMA_ESC_BURST    0x00000800        /* 1=16byte 0=32byte */
+#define DMA_READ_AHEAD   0x00001800        /* DMA read ahead partial longword */
+#define DMA_DSBL_RD_DRN  0x00001000        /* No EC drain on slave reads */
+#define DMA_BCNT_ENAB    0x00002000        /* If on, use the byte counter */
+#define DMA_TERM_CNTR    0x00004000        /* Terminal counter */
+#define DMA_CSR_DISAB    0x00010000        /* No FIFO drains during csr */
+#define DMA_SCSI_DISAB   0x00020000        /* No FIFO drains during reg */
+#define DMA_DSBL_WR_INV  0x00020000        /* No EC inval. on slave writes */
+#define DMA_ADD_ENABLE   0x00040000        /* Special ESC DVMA optimization */
+#define DMA_E_BURST8     0x00040000        /* ENET: SBUS r/w burst size */
+#define DMA_BRST_SZ      0x000c0000        /* SCSI: SBUS r/w burst size */
+#define DMA_BRST64       0x00080000        /* SCSI: 64byte bursts (HME on UltraSparc only) */
+#define DMA_BRST32       0x00040000        /* SCSI: 32byte bursts */
+#define DMA_BRST16       0x00000000        /* SCSI: 16byte bursts */
+#define DMA_BRST0        0x00080000        /* SCSI: no bursts (non-HME gate arrays) */
+#define DMA_ADDR_DISAB   0x00100000        /* No FIFO drains during addr */
+#define DMA_2CLKS        0x00200000        /* Each transfer = 2 clock ticks */
+#define DMA_3CLKS        0x00400000        /* Each transfer = 3 clock ticks */
+#define DMA_EN_ENETAUI   DMA_3CLKS         /* Put lance into AUI-cable mode */
+#define DMA_CNTR_DISAB   0x00800000        /* No IRQ when DMA_TERM_CNTR set */
+#define DMA_AUTO_NADDR   0x01000000        /* Use "auto nxt addr" feature */
+#define DMA_SCSI_ON      0x02000000        /* Enable SCSI dma */
+#define DMA_PARITY_OFF   0x02000000        /* HME: disable parity checking */
+#define DMA_LOADED_ADDR  0x04000000        /* Address has been loaded */
+#define DMA_LOADED_NADDR 0x08000000        /* Next address has been loaded */
+
+/* Values describing the burst-size property from the PROM */
+#define DMA_BURST1       0x01
+#define DMA_BURST2       0x02
+#define DMA_BURST4       0x04
+#define DMA_BURST8       0x08
+#define DMA_BURST16      0x10
+#define DMA_BURST32      0x20
+#define DMA_BURST64      0x40
+#define DMA_BURSTBITS    0x7f
+
+/* Determine highest possible final transfer address given a base */
+#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL))
+
+/* Yes, I hack a lot of elisp in my spare time... */
+#define DMA_ERROR_P(regs)  ((((regs)->cond_reg) & DMA_HNDL_ERROR))
+#define DMA_IRQ_P(regs)    ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)))
+#define DMA_WRITE_P(regs)  ((((regs)->cond_reg) & DMA_ST_WRITE))
+#define DMA_OFF(regs)      ((((regs)->cond_reg) &= (~DMA_ENABLE)))
+#define DMA_INTSOFF(regs)  ((((regs)->cond_reg) &= (~DMA_INT_ENAB)))
+#define DMA_INTSON(regs)   ((((regs)->cond_reg) |= (DMA_INT_ENAB)))
+#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV))
+#define DMA_SETSTART(regs, addr)  ((((regs)->st_addr) = (char *) addr))
+#define DMA_BEGINDMA_W(regs) \
+        ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB))))
+#define DMA_BEGINDMA_R(regs) \
+        ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE)))))
+
+/* For certain DMA chips, we need to disable ints upon irq entry
+ * and turn them back on when we are done.  So in any ESP interrupt
+ * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT
+ * when leaving the handler.  You have been warned...
+ */
+#define DMA_IRQ_ENTRY(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \
+   } while (0)
+
+#define DMA_IRQ_EXIT(dma, dregs) do { \
+        if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \
+   } while(0)
+
+/* Reset the friggin' thing... */
+#define DMA_RESET(dma) do { \
+        struct sparc_dma_registers *regs = dma->regs;                      \
+        /* Let the current FIFO drain itself */                            \
+        sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN));                         \
+        /* Reset the logic */                                              \
+        regs->cond_reg |= (DMA_RST_SCSI);     /* assert */                 \
+        __delay(400);                         /* let the bits set ;) */    \
+        regs->cond_reg &= ~(DMA_RST_SCSI);    /* de-assert */              \
+        sparc_dma_enable_interrupts(regs);    /* Re-enable interrupts */   \
+        /* Enable FAST transfers if available */                           \
+        if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS;            \
+        dma->running = 0;                                                  \
+} while(0)
+
+
+#endif /* !CONFIG_SUN3 */
+
+#endif /* !(__M68K_DVMA_H) */
diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h
new file mode 100644
index 000000000000..04ce488bc63f
--- /dev/null
+++ b/arch/m68k/include/asm/elf.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "elf_no.h"
+#else
+#include "elf_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/elf_mm.h b/arch/m68k/include/asm/elf_mm.h
new file mode 100644
index 000000000000..0b0f49eb876b
--- /dev/null
+++ b/arch/m68k/include/asm/elf_mm.h
@@ -0,0 +1,119 @@
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE      0
+#define R_68K_32        1
+#define R_68K_16        2
+#define R_68K_8         3
+#define R_68K_PC32      4
+#define R_68K_PC16      5
+#define R_68K_PC8       6
+#define R_68K_GOT32     7
+#define R_68K_GOT16     8
+#define R_68K_GOT8      9
+#define R_68K_GOT32O    10
+#define R_68K_GOT16O    11
+#define R_68K_GOT8O     12
+#define R_68K_PLT32     13
+#define R_68K_PLT16     14
+#define R_68K_PLT8      15
+#define R_68K_PLT32O    16
+#define R_68K_PLT16O    17
+#define R_68K_PLT8O     18
+#define R_68K_COPY      19
+#define R_68K_GLOB_DAT  20
+#define R_68K_JMP_SLOT  21
+#define R_68K_RELATIVE  22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS       ELFCLASS32
+#define ELF_DATA        ELFDATA2MSB
+#define ELF_ARCH        EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+   passed in %a1.  Although my copy of the ABI has no such statement, it
+   is actually used on ASV.  */
+#define ELF_PLAT_INIT(_r, load_addr)    _r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#ifndef CONFIG_SUN3
+#define ELF_EXEC_PAGESIZE       4096
+#else
+#define ELF_EXEC_PAGESIZE       8192
+#endif
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#ifndef CONFIG_SUN3
+#define ELF_ET_DYN_BASE         0xD0000000UL
+#else
+#define ELF_ET_DYN_BASE         0x0D800000UL
+#endif
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)                                \
+        /* Bleech. */                                                   \
+        pr_reg[0] = regs->d1;                                           \
+        pr_reg[1] = regs->d2;                                           \
+        pr_reg[2] = regs->d3;                                           \
+        pr_reg[3] = regs->d4;                                           \
+        pr_reg[4] = regs->d5;                                           \
+        pr_reg[7] = regs->a0;                                           \
+        pr_reg[8] = regs->a1;                                           \
+        pr_reg[9] = regs->a2;                                           \
+        pr_reg[14] = regs->d0;                                          \
+        pr_reg[15] = rdusp();                                           \
+        pr_reg[16] = regs->orig_d0;                                     \
+        pr_reg[17] = regs->sr;                                          \
+        pr_reg[18] = regs->pc;                                          \
+        pr_reg[19] = (regs->format << 12) | regs->vector;               \
+        {                                                               \
+          struct switch_stack *sw = ((struct switch_stack *)regs) - 1;  \
+          pr_reg[5] = sw->d6;                                           \
+          pr_reg[6] = sw->d7;                                           \
+          pr_reg[10] = sw->a3;                                          \
+          pr_reg[11] = sw->a4;                                          \
+          pr_reg[12] = sw->a5;                                          \
+          pr_reg[13] = sw->a6;                                          \
+        }
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif
diff --git a/arch/m68k/include/asm/elf_no.h b/arch/m68k/include/asm/elf_no.h
new file mode 100644
index 000000000000..b8046837f384
--- /dev/null
+++ b/arch/m68k/include/asm/elf_no.h
@@ -0,0 +1,110 @@
+#ifndef __ASMm68k_ELF_H
+#define __ASMm68k_ELF_H
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+
+/*
+ * 68k ELF relocation types
+ */
+#define R_68K_NONE  0
+#define R_68K_32    1
+#define R_68K_16    2
+#define R_68K_8     3
+#define R_68K_PC32  4
+#define R_68K_PC16  5
+#define R_68K_PC8   6
+#define R_68K_GOT32 7
+#define R_68K_GOT16 8
+#define R_68K_GOT8  9
+#define R_68K_GOT32O    10
+#define R_68K_GOT16O    11
+#define R_68K_GOT8O 12
+#define R_68K_PLT32 13
+#define R_68K_PLT16 14
+#define R_68K_PLT8  15
+#define R_68K_PLT32O    16
+#define R_68K_PLT16O    17
+#define R_68K_PLT8O 18
+#define R_68K_COPY  19
+#define R_68K_GLOB_DAT  20
+#define R_68K_JMP_SLOT  21
+#define R_68K_RELATIVE  22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof(struct user_regs_struct) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_m68kfp_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_68K)
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS       ELFCLASS32
+#define ELF_DATA        ELFDATA2MSB
+#define ELF_ARCH        EM_68K
+
+/* For SVR4/m68k the function pointer to be registered with `atexit' is
+   passed in %a1.  Although my copy of the ABI has no such statement, it
+   is actually used on ASV.  */
+#define ELF_PLAT_INIT(_r, load_addr)    _r->a1 = 0
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE       4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
+   use of this is to invoke "./ld.so someprog" to test out a new version of
+   the loader.  We need to make sure that it is out of the way of the program
+   that it will "exec", and that there is sufficient room for the brk.  */
+
+#define ELF_ET_DYN_BASE         0xD0000000UL
+
+#define ELF_CORE_COPY_REGS(pr_reg, regs)                                \
+        /* Bleech. */                                                   \
+        pr_reg[0] = regs->d1;                                           \
+        pr_reg[1] = regs->d2;                                           \
+        pr_reg[2] = regs->d3;                                           \
+        pr_reg[3] = regs->d4;                                           \
+        pr_reg[4] = regs->d5;                                           \
+        pr_reg[7] = regs->a0;                                           \
+        pr_reg[8] = regs->a1;                                           \
+        pr_reg[14] = regs->d0;                                          \
+        pr_reg[15] = rdusp();                                           \
+        pr_reg[16] = 0 /* regs->orig_d0 */;                             \
+        pr_reg[17] = regs->sr;                                          \
+        pr_reg[18] = regs->pc;                                          \
+        /* pr_reg[19] = (regs->format << 12) | regs->vector; */         \
+        {                                                               \
+          struct switch_stack *sw = ((struct switch_stack *)regs) - 1;  \
+          pr_reg[5] = sw->d6;                                           \
+          pr_reg[6] = sw->d7;                                           \
+          pr_reg[10] = sw->a3;                                          \
+          pr_reg[11] = sw->a4;                                          \
+          pr_reg[12] = sw->a5;                                          \
+          pr_reg[13] = sw->a6;                                          \
+        }
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this cpu supports.  */
+
+#define ELF_HWCAP       (0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.  */
+
+#define ELF_PLATFORM  (NULL)
+
+#define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+
+#endif
diff --git a/arch/m68k/include/asm/elia.h b/arch/m68k/include/asm/elia.h
new file mode 100644
index 000000000000..e037d4e2de33
--- /dev/null
+++ b/arch/m68k/include/asm/elia.h
@@ -0,0 +1,41 @@
+/****************************************************************************/
+
+/*
+ *      elia.h -- Lineo (formerly Moreton Bay) eLIA platform support.
+ *
+ *      (C) Copyright 1999-2000, Moreton Bay (www.moreton.com.au)
+ *      (C) Copyright 1999-2000, Lineo (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef elia_h
+#define elia_h
+/****************************************************************************/
+
+#include <asm/coldfire.h>
+
+#ifdef CONFIG_eLIA
+
+/*
+ *      The serial port DTR and DCD lines are also on the Parallel I/O
+ *      as well, so define those too.
+ */
+
+#define eLIA_DCD1               0x0001
+#define eLIA_DCD0               0x0002
+#define eLIA_DTR1               0x0004
+#define eLIA_DTR0               0x0008
+
+#define eLIA_PCIRESET           0x0020
+
+/*
+ *      Kernel macros to set and unset the LEDs.
+ */
+#ifndef __ASSEMBLY__
+extern unsigned short   ppdata;
+#endif /* __ASSEMBLY__ */
+
+#endif  /* CONFIG_eLIA */
+
+/****************************************************************************/
+#endif  /* elia_h */
diff --git a/arch/m68k/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h
new file mode 100644
index 000000000000..108d8c48e42e
--- /dev/null
+++ b/arch/m68k/include/asm/emergency-restart.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_EMERGENCY_RESTART_H
+#define _ASM_EMERGENCY_RESTART_H
+
+#include <asm-generic/emergency-restart.h>
+
+#endif /* _ASM_EMERGENCY_RESTART_H */
diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h
new file mode 100644
index 000000000000..876eec6f2b52
--- /dev/null
+++ b/arch/m68k/include/asm/entry.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "entry_no.h"
+#else
+#include "entry_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/entry_mm.h b/arch/m68k/include/asm/entry_mm.h
new file mode 100644
index 000000000000..5202f5a5b420
--- /dev/null
+++ b/arch/m68k/include/asm/entry_mm.h
@@ -0,0 +1,137 @@
+#ifndef __M68K_ENTRY_H
+#define __M68K_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ *      This allows access to the syscall arguments in registers d1-d5
+ *
+ *       0(sp) - d1
+ *       4(sp) - d2
+ *       8(sp) - d3
+ *       C(sp) - d4
+ *      10(sp) - d5
+ *      14(sp) - a0
+ *      18(sp) - a1
+ *      1C(sp) - a2
+ *      20(sp) - d0
+ *      24(sp) - orig_d0
+ *      28(sp) - stack adjustment
+ *      2C(sp) - sr
+ *      2E(sp) - pc
+ *      32(sp) - format & vector
+ */
+
+/*
+ * 97/05/14 Andreas: Register %a2 is now set to the current task throughout
+ *                   the whole kernel.
+ */
+
+/* the following macro is used when enabling interrupts */
+#if defined(MACH_ATARI_ONLY)
+        /* block out HSYNC on the atari */
+#define ALLOWINT        (~0x400)
+#define MAX_NOINT_IPL   3
+#else
+        /* portable version */
+#define ALLOWINT        (~0x700)
+#define MAX_NOINT_IPL   0
+#endif /* machine compilation types */
+
+#ifdef __ASSEMBLY__
+
+#define curptr a2
+
+LFLUSH_I_AND_D = 0x00000808
+LSIGTRAP = 5
+
+/* process bits for task_struct.ptrace */
+PT_TRACESYS_OFF = 3
+PT_TRACESYS_BIT = 1
+PT_PTRACED_OFF = 3
+PT_PTRACED_BIT = 0
+PT_DTRACE_OFF = 3
+PT_DTRACE_BIT = 2
+
+#define SAVE_ALL_INT save_all_int
+#define SAVE_ALL_SYS save_all_sys
+#define RESTORE_ALL restore_all
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs a3-a6 and d6-d7 are preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+/*
+ * a -1 in the orig_d0 field signifies
+ * that the stack frame is NOT for syscall
+ */
+.macro  save_all_int
+        clrl    %sp@-           | stk_adj
+        pea     -1:w            | orig d0
+        movel   %d0,%sp@-       | d0
+        moveml  %d1-%d5/%a0-%a1/%curptr,%sp@-
+.endm
+
+.macro  save_all_sys
+        clrl    %sp@-           | stk_adj
+        movel   %d0,%sp@-       | orig d0
+        movel   %d0,%sp@-       | d0
+        moveml  %d1-%d5/%a0-%a1/%curptr,%sp@-
+.endm
+
+.macro  restore_all
+        moveml  %sp@+,%a0-%a1/%curptr/%d1-%d5
+        movel   %sp@+,%d0
+        addql   #4,%sp          | orig d0
+        addl    %sp@+,%sp       | stk adj
+        rte
+.endm
+
+#define SWITCH_STACK_SIZE (6*4+4)       /* includes return address */
+
+#define SAVE_SWITCH_STACK save_switch_stack
+#define RESTORE_SWITCH_STACK restore_switch_stack
+#define GET_CURRENT(tmp) get_current tmp
+
+.macro  save_switch_stack
+        moveml  %a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro  restore_switch_stack
+        moveml  %sp@+,%a3-%a6/%d6-%d7
+.endm
+
+.macro  get_current reg=%d0
+        movel   %sp,\reg
+        andw    #-THREAD_SIZE,\reg
+        movel   \reg,%curptr
+        movel   %curptr@,%curptr
+.endm
+
+#else /* C source */
+
+#define STR(X) STR1(X)
+#define STR1(X) #X
+
+#define PT_OFF_ORIG_D0   0x24
+#define PT_OFF_FORMATVEC 0x32
+#define PT_OFF_SR        0x2C
+#define SAVE_ALL_INT                            \
+        "clrl   %%sp@-;"    /* stk_adj */       \
+        "pea    -1:w;"      /* orig d0 = -1 */  \
+        "movel  %%d0,%%sp@-;" /* d0 */          \
+        "moveml %%d1-%%d5/%%a0-%%a2,%%sp@-"
+#define GET_CURRENT(tmp) \
+        "movel  %%sp,"#tmp"\n\t" \
+        "andw   #-"STR(THREAD_SIZE)","#tmp"\n\t" \
+        "movel  "#tmp",%%a2\n\t" \
+        "movel  %%a2@,%%a2"
+
+#endif
+
+#endif /* __M68K_ENTRY_H */
diff --git a/arch/m68k/include/asm/entry_no.h b/arch/m68k/include/asm/entry_no.h
new file mode 100644
index 000000000000..c2553d26273d
--- /dev/null
+++ b/arch/m68k/include/asm/entry_no.h
@@ -0,0 +1,182 @@
+#ifndef __M68KNOMMU_ENTRY_H
+#define __M68KNOMMU_ENTRY_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Stack layout in 'ret_from_exception':
+ *
+ * This allows access to the syscall arguments in registers d1-d5
+ *
+ *       0(sp) - d1
+ *       4(sp) - d2
+ *       8(sp) - d3
+ *       C(sp) - d4
+ *      10(sp) - d5
+ *      14(sp) - a0
+ *      18(sp) - a1
+ *      1C(sp) - a2
+ *      20(sp) - d0
+ *      24(sp) - orig_d0
+ *      28(sp) - stack adjustment
+ *      2C(sp) - [ sr              ] [ format & vector ]
+ *      2E(sp) - [ pc-hiword       ] [ sr              ]
+ *      30(sp) - [ pc-loword       ] [ pc-hiword       ]
+ *      32(sp) - [ format & vector ] [ pc-loword       ]
+ *                ^^^^^^^^^^^^^^^^^   ^^^^^^^^^^^^^^^^^
+ *                      M68K              COLDFIRE
+ */
+
+#define ALLOWINT 0xf8ff
+
+#ifdef __ASSEMBLY__
+
+/* process bits for task_struct.flags */
+PF_TRACESYS_OFF = 3
+PF_TRACESYS_BIT = 5
+PF_PTRACED_OFF = 3
+PF_PTRACED_BIT = 4
+PF_DTRACE_OFF = 1
+PF_DTRACE_BIT = 5
+
+LENOSYS = 38
+
+#define SWITCH_STACK_SIZE (6*4+4)       /* Includes return address */
+
+/*
+ * This defines the normal kernel pt-regs layout.
+ *
+ * regs are a2-a6 and d6-d7 preserved by C code
+ * the kernel doesn't mess with usp unless it needs to
+ */
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * This is made a little more tricky on the ColdFire. There is no
+ * separate kernel and user stack pointers. Need to artificially
+ * construct a usp in software... When doing this we need to disable
+ * interrupts, otherwise bad things could happen.
+ */
+.macro SAVE_ALL
+        move    #0x2700,%sr             /* disable intrs */
+        btst    #5,%sp@(2)              /* from user? */
+        bnes    6f                      /* no, skip */
+        movel   %sp,sw_usp              /* save user sp */
+        addql   #8,sw_usp               /* remove exception */
+        movel   sw_ksp,%sp              /* kernel sp */
+        subql   #8,%sp                  /* room for exception */
+        clrl    %sp@-                   /* stkadj */
+        movel   %d0,%sp@-               /* orig d0 */
+        movel   %d0,%sp@-               /* d0 */
+        lea     %sp@(-32),%sp           /* space for 8 regs */
+        moveml  %d1-%d5/%a0-%a2,%sp@
+        movel   sw_usp,%a0              /* get usp */
+        movel   %a0@-,%sp@(PT_PC)       /* copy exception program counter */
+        movel   %a0@-,%sp@(PT_FORMATVEC)/* copy exception format/vector/sr */
+        bra     7f
+        6:
+        clrl    %sp@-                   /* stkadj */
+        movel   %d0,%sp@-               /* orig d0 */
+        movel   %d0,%sp@-               /* d0 */
+        lea     %sp@(-32),%sp           /* space for 8 regs */
+        moveml  %d1-%d5/%a0-%a2,%sp@
+        7:
+.endm
+
+.macro RESTORE_ALL
+        btst    #5,%sp@(PT_SR)          /* going user? */
+        bnes    8f                      /* no, skip */
+        move    #0x2700,%sr             /* disable intrs */
+        movel   sw_usp,%a0              /* get usp */
+        movel   %sp@(PT_PC),%a0@-       /* copy exception program counter */
+        movel   %sp@(PT_FORMATVEC),%a0@-/* copy exception format/vector/sr */
+        moveml  %sp@,%d1-%d5/%a0-%a2
+        lea     %sp@(32),%sp            /* space for 8 regs */
+        movel   %sp@+,%d0
+        addql   #4,%sp                  /* orig d0 */
+        addl    %sp@+,%sp               /* stkadj */
+        addql   #8,%sp                  /* remove exception */
+        movel   %sp,sw_ksp              /* save ksp */
+        subql   #8,sw_usp               /* set exception */
+        movel   sw_usp,%sp              /* restore usp */
+        rte
+        8:
+        moveml  %sp@,%d1-%d5/%a0-%a2
+        lea     %sp@(32),%sp            /* space for 8 regs */
+        movel   %sp@+,%d0
+        addql   #4,%sp                  /* orig d0 */
+        addl    %sp@+,%sp               /* stkadj */
+        rte
+.endm
+
+/*
+ * Quick exception save, use current stack only.
+ */
+.macro SAVE_LOCAL
+        move    #0x2700,%sr             /* disable intrs */
+        clrl    %sp@-                   /* stkadj */
+        movel   %d0,%sp@-               /* orig d0 */
+        movel   %d0,%sp@-               /* d0 */
+        lea     %sp@(-32),%sp           /* space for 8 regs */
+        moveml  %d1-%d5/%a0-%a2,%sp@
+.endm
+
+.macro RESTORE_LOCAL
+        moveml  %sp@,%d1-%d5/%a0-%a2
+        lea     %sp@(32),%sp            /* space for 8 regs */
+        movel   %sp@+,%d0
+        addql   #4,%sp                  /* orig d0 */
+        addl    %sp@+,%sp               /* stkadj */
+        rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+        lea     %sp@(-24),%sp           /* 6 regs */
+        moveml  %a3-%a6/%d6-%d7,%sp@
+.endm
+
+.macro RESTORE_SWITCH_STACK
+        moveml  %sp@,%a3-%a6/%d6-%d7
+        lea     %sp@(24),%sp            /* 6 regs */
+.endm
+
+/*
+ * Software copy of the user and kernel stack pointers... Ugh...
+ * Need these to get around ColdFire not having separate kernel
+ * and user stack pointers.
+ */
+.globl sw_usp
+.globl sw_ksp
+
+#else /* !CONFIG_COLDFIRE */
+
+/*
+ * Standard 68k interrupt entry and exit macros.
+ */
+.macro SAVE_ALL
+        clrl    %sp@-                   /* stkadj */
+        movel   %d0,%sp@-               /* orig d0 */
+        movel   %d0,%sp@-               /* d0 */
+        moveml  %d1-%d5/%a0-%a2,%sp@-
+.endm
+
+.macro RESTORE_ALL
+        moveml  %sp@+,%a0-%a2/%d1-%d5
+        movel   %sp@+,%d0
+        addql   #4,%sp                  /* orig d0 */
+        addl    %sp@+,%sp               /* stkadj */
+        rte
+.endm
+
+.macro SAVE_SWITCH_STACK
+        moveml  %a3-%a6/%d6-%d7,%sp@-
+.endm
+
+.macro RESTORE_SWITCH_STACK
+        moveml  %sp@+,%a3-%a6/%d6-%d7
+.endm
+
+#endif /* !CONFIG_COLDFIRE */
+#endif /* __ASSEMBLY__ */
+#endif /* __M68KNOMMU_ENTRY_H */
diff --git a/arch/m68k/include/asm/errno.h b/arch/m68k/include/asm/errno.h
new file mode 100644
index 000000000000..0d4e188d6ef6
--- /dev/null
+++ b/arch/m68k/include/asm/errno.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_ERRNO_H
+#define _M68K_ERRNO_H
+
+#include <asm-generic/errno.h>
+
+#endif /* _M68K_ERRNO_H */
diff --git a/arch/m68k/include/asm/fb.h b/arch/m68k/include/asm/fb.h
new file mode 100644
index 000000000000..97bcaefd2064
--- /dev/null
+++ b/arch/m68k/include/asm/fb.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fb_no.h"
+#else
+#include "fb_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/fb_mm.h b/arch/m68k/include/asm/fb_mm.h
new file mode 100644
index 000000000000..380b97ae8157
--- /dev/null
+++ b/arch/m68k/include/asm/fb_mm.h
@@ -0,0 +1,34 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+
+#include <linux/fb.h>
+#include <linux/fs.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+
+#ifdef CONFIG_SUN3
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+                                unsigned long off)
+{
+        pgprot_val(vma->vm_page_prot) |= SUN3_PAGE_NOCACHE;
+}
+#else
+static inline void fb_pgprotect(struct file *file, struct vm_area_struct *vma,
+                                unsigned long off)
+{
+        if (CPU_IS_020_OR_030)
+                pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE030;
+        if (CPU_IS_040_OR_060) {
+                pgprot_val(vma->vm_page_prot) &= _CACHEMASK040;
+                /* Use no-cache mode, serialized */
+                pgprot_val(vma->vm_page_prot) |= _PAGE_NOCACHE_S;
+        }
+}
+#endif /* CONFIG_SUN3 */
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+        return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/m68k/include/asm/fb_no.h b/arch/m68k/include/asm/fb_no.h
new file mode 100644
index 000000000000..c7df38030992
--- /dev/null
+++ b/arch/m68k/include/asm/fb_no.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_FB_H_
+#define _ASM_FB_H_
+#include <linux/fb.h>
+
+#define fb_pgprotect(...) do {} while (0)
+
+static inline int fb_is_primary_device(struct fb_info *info)
+{
+        return 0;
+}
+
+#endif /* _ASM_FB_H_ */
diff --git a/arch/m68k/include/asm/fbio.h b/arch/m68k/include/asm/fbio.h
new file mode 100644
index 000000000000..b9215a0907d3
--- /dev/null
+++ b/arch/m68k/include/asm/fbio.h
@@ -0,0 +1,330 @@
+#ifndef __LINUX_FBIO_H
+#define __LINUX_FBIO_H
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/* Constants used for fbio SunOS compatibility */
+/* (C) 1996 Miguel de Icaza */
+
+/* Frame buffer types */
+#define FBTYPE_NOTYPE           -1
+#define FBTYPE_SUN1BW           0   /* mono */
+#define FBTYPE_SUN1COLOR        1 
+#define FBTYPE_SUN2BW           2 
+#define FBTYPE_SUN2COLOR        3 
+#define FBTYPE_SUN2GP           4 
+#define FBTYPE_SUN5COLOR        5 
+#define FBTYPE_SUN3COLOR        6 
+#define FBTYPE_MEMCOLOR         7 
+#define FBTYPE_SUN4COLOR        8 
+ 
+#define FBTYPE_NOTSUN1          9 
+#define FBTYPE_NOTSUN2          10
+#define FBTYPE_NOTSUN3          11
+ 
+#define FBTYPE_SUNFAST_COLOR    12  /* cg6 */
+#define FBTYPE_SUNROP_COLOR     13
+#define FBTYPE_SUNFB_VIDEO      14
+#define FBTYPE_SUNGIFB          15
+#define FBTYPE_SUNGPLAS         16
+#define FBTYPE_SUNGP3           17
+#define FBTYPE_SUNGT            18
+#define FBTYPE_SUNLEO           19      /* zx Leo card */
+#define FBTYPE_MDICOLOR         20      /* cg14 */
+#define FBTYPE_TCXCOLOR         21      /* SUNW,tcx card */
+
+#define FBTYPE_LASTPLUSONE      21      /* This is not last + 1 in fact... */
+
+/* Does not seem to be listed in the Sun file either */
+#define FBTYPE_CREATOR          22
+#define FBTYPE_PCI_IGA1682      23
+#define FBTYPE_P9100COLOR       24
+
+#define FBTYPE_PCI_GENERIC      1000
+#define FBTYPE_PCI_MACH64       1001
+
+/* fbio ioctls */
+/* Returned by FBIOGTYPE */
+struct  fbtype {
+        int     fb_type;        /* fb type, see above */
+        int     fb_height;      /* pixels */
+        int     fb_width;       /* pixels */
+        int     fb_depth;
+        int     fb_cmsize;      /* color map entries */
+        int     fb_size;        /* fb size in bytes */
+};
+#define FBIOGTYPE _IOR('F', 0, struct fbtype)
+
+struct  fbcmap {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        unsigned char   __user *red;
+        unsigned char   __user *green;
+        unsigned char   __user *blue;
+};
+
+#ifdef __KERNEL__
+#define FBIOPUTCMAP_SPARC _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP_SPARC _IOW('F', 4, struct fbcmap)
+#else
+#define FBIOPUTCMAP _IOW('F', 3, struct fbcmap)
+#define FBIOGETCMAP _IOW('F', 4, struct fbcmap)
+#endif
+
+/* # of device specific values */
+#define FB_ATTR_NDEVSPECIFIC    8
+/* # of possible emulations */
+#define FB_ATTR_NEMUTYPES       4
+ 
+struct fbsattr {
+        int     flags;
+        int     emu_type;       /* -1 if none */
+        int     dev_specific[FB_ATTR_NDEVSPECIFIC];
+};
+ 
+struct fbgattr {
+        int     real_type;      /* real frame buffer type */
+        int     owner;          /* unknown */
+        struct fbtype fbtype;   /* real frame buffer fbtype */
+        struct fbsattr sattr;   
+        int     emu_types[FB_ATTR_NEMUTYPES]; /* supported emulations */
+};
+#define FBIOSATTR  _IOW('F', 5, struct fbgattr) /* Unsupported: */
+#define FBIOGATTR  _IOR('F', 6, struct fbgattr) /* supported */
+
+#define FBIOSVIDEO _IOW('F', 7, int)
+#define FBIOGVIDEO _IOR('F', 8, int)
+
+struct fbcursor {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap cmap;     /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        char __user *image;     /* cursor image bits */
+        char __user *mask;      /* cursor mask bits */
+};
+
+/* set/get cursor attributes/shape */
+#define FBIOSCURSOR     _IOW('F', 24, struct fbcursor)
+#define FBIOGCURSOR     _IOWR('F', 25, struct fbcursor)
+ 
+/* set/get cursor position */
+#define FBIOSCURPOS     _IOW('F', 26, struct fbcurpos)
+#define FBIOGCURPOS     _IOW('F', 27, struct fbcurpos)
+ 
+/* get max cursor size */
+#define FBIOGCURMAX     _IOR('F', 28, struct fbcurpos)
+
+/* wid manipulation */
+struct fb_wid_alloc {
+#define FB_WID_SHARED_8         0
+#define FB_WID_SHARED_24        1
+#define FB_WID_DBL_8            2
+#define FB_WID_DBL_24           3
+        __u32   wa_type;
+        __s32   wa_index;       /* Set on return */
+        __u32   wa_count;       
+};
+struct fb_wid_item {
+        __u32   wi_type;
+        __s32   wi_index;
+        __u32   wi_attrs;
+        __u32   wi_values[32];
+};
+struct fb_wid_list {
+        __u32   wl_flags;
+        __u32   wl_count;
+        struct fb_wid_item      *wl_list;
+};
+
+#define FBIO_WID_ALLOC  _IOWR('F', 30, struct fb_wid_alloc)
+#define FBIO_WID_FREE   _IOW('F', 31, struct fb_wid_alloc)
+#define FBIO_WID_PUT    _IOW('F', 32, struct fb_wid_list)
+#define FBIO_WID_GET    _IOWR('F', 33, struct fb_wid_list)
+
+/* Creator ioctls */
+#define FFB_IOCTL       ('F'<<8)
+#define FFB_SYS_INFO            (FFB_IOCTL|80)
+#define FFB_CLUTREAD            (FFB_IOCTL|81)
+#define FFB_CLUTPOST            (FFB_IOCTL|82)
+#define FFB_SETDIAGMODE         (FFB_IOCTL|83)
+#define FFB_GETMONITORID        (FFB_IOCTL|84)
+#define FFB_GETVIDEOMODE        (FFB_IOCTL|85)
+#define FFB_SETVIDEOMODE        (FFB_IOCTL|86)
+#define FFB_SETSERVER           (FFB_IOCTL|87)
+#define FFB_SETOVCTL            (FFB_IOCTL|88)
+#define FFB_GETOVCTL            (FFB_IOCTL|89)
+#define FFB_GETSAXNUM           (FFB_IOCTL|90)
+#define FFB_FBDEBUG             (FFB_IOCTL|91)
+
+/* Cg14 ioctls */
+#define MDI_IOCTL          ('M'<<8)
+#define MDI_RESET          (MDI_IOCTL|1)
+#define MDI_GET_CFGINFO    (MDI_IOCTL|2)
+#define MDI_SET_PIXELMODE  (MDI_IOCTL|3)
+#    define MDI_32_PIX     32
+#    define MDI_16_PIX     16
+#    define MDI_8_PIX      8
+
+struct mdi_cfginfo {
+        int     mdi_ncluts;     /* Number of implemented CLUTs in this MDI */
+        int     mdi_type;       /* FBTYPE name */
+        int     mdi_height;     /* height */
+        int     mdi_width;      /* widht */
+        int     mdi_size;       /* available ram */
+        int     mdi_mode;       /* 8bpp, 16bpp or 32bpp */
+        int     mdi_pixfreq;    /* pixel clock (from PROM) */
+};
+
+/* SparcLinux specific ioctl for the MDI, should be replaced for
+ * the SET_XLUT/SET_CLUTn ioctls instead
+ */
+#define MDI_CLEAR_XLUT       (MDI_IOCTL|9)
+
+/* leo & ffb ioctls */
+struct fb_clut_alloc {
+        __u32   clutid; /* Set on return */
+        __u32   flag;
+        __u32   index;
+};
+
+struct fb_clut {
+#define FB_CLUT_WAIT    0x00000001      /* Not yet implemented */
+        __u32   flag;
+        __u32   clutid;
+        __u32   offset;
+        __u32   count;
+        char *  red;
+        char *  green;
+        char *  blue;
+};
+
+struct fb_clut32 {
+        __u32   flag;
+        __u32   clutid;
+        __u32   offset;
+        __u32   count;
+        __u32   red;
+        __u32   green;
+        __u32   blue;
+};
+
+#define LEO_CLUTALLOC   _IOWR('L', 53, struct fb_clut_alloc)
+#define LEO_CLUTFREE    _IOW('L', 54, struct fb_clut_alloc)
+#define LEO_CLUTREAD    _IOW('L', 55, struct fb_clut)
+#define LEO_CLUTPOST    _IOW('L', 56, struct fb_clut)
+#define LEO_SETGAMMA    _IOW('L', 68, int) /* Not yet implemented */
+#define LEO_GETGAMMA    _IOR('L', 69, int) /* Not yet implemented */
+
+#ifdef __KERNEL__
+/* Addresses on the fd of a cgsix that are mappable */
+#define CG6_FBC    0x70000000
+#define CG6_TEC    0x70001000
+#define CG6_BTREGS 0x70002000
+#define CG6_FHC    0x70004000
+#define CG6_THC    0x70005000
+#define CG6_ROM    0x70006000
+#define CG6_RAM    0x70016000
+#define CG6_DHC    0x80000000
+
+#define CG3_MMAP_OFFSET 0x4000000
+
+/* Addresses on the fd of a tcx that are mappable */
+#define TCX_RAM8BIT             0x00000000
+#define TCX_RAM24BIT            0x01000000
+#define TCX_UNK3                0x10000000
+#define TCX_UNK4                0x20000000
+#define TCX_CONTROLPLANE        0x28000000
+#define TCX_UNK6                0x30000000
+#define TCX_UNK7                0x38000000
+#define TCX_TEC                 0x70000000
+#define TCX_BTREGS              0x70002000
+#define TCX_THC                 0x70004000
+#define TCX_DHC                 0x70008000
+#define TCX_ALT                 0x7000a000
+#define TCX_SYNC                0x7000e000
+#define TCX_UNK2                0x70010000
+
+/* CG14 definitions */
+
+/* Offsets into the OBIO space: */
+#define CG14_REGS        0       /* registers */
+#define CG14_CURSORREGS  0x1000  /* cursor registers */
+#define CG14_DACREGS     0x2000  /* DAC registers */
+#define CG14_XLUT        0x3000  /* X Look Up Table -- ??? */
+#define CG14_CLUT1       0x4000  /* Color Look Up Table */
+#define CG14_CLUT2       0x5000  /* Color Look Up Table */
+#define CG14_CLUT3       0x6000  /* Color Look Up Table */
+#define CG14_AUTO        0xf000
+
+#endif /* KERNEL */
+
+/* These are exported to userland for applications to use */
+/* Mappable offsets for the cg14: control registers */
+#define MDI_DIRECT_MAP 0x10000000
+#define MDI_CTLREG_MAP 0x20000000
+#define MDI_CURSOR_MAP 0x30000000
+#define MDI_SHDW_VRT_MAP 0x40000000
+
+/* Mappable offsets for the cg14: frame buffer resolutions */
+/* 32 bits */
+#define MDI_CHUNKY_XBGR_MAP 0x50000000
+#define MDI_CHUNKY_BGR_MAP 0x60000000
+
+/* 16 bits */
+#define MDI_PLANAR_X16_MAP 0x70000000
+#define MDI_PLANAR_C16_MAP 0x80000000
+
+/* 8 bit is done as CG3 MMAP offset */
+/* 32 bits, planar */
+#define MDI_PLANAR_X32_MAP 0x90000000
+#define MDI_PLANAR_B32_MAP 0xa0000000
+#define MDI_PLANAR_G32_MAP 0xb0000000
+#define MDI_PLANAR_R32_MAP 0xc0000000
+
+/* Mappable offsets on leo */
+#define LEO_SS0_MAP            0x00000000
+#define LEO_LC_SS0_USR_MAP     0x00800000
+#define LEO_LD_SS0_MAP         0x00801000
+#define LEO_LX_CURSOR_MAP      0x00802000
+#define LEO_SS1_MAP            0x00803000
+#define LEO_LC_SS1_USR_MAP     0x01003000
+#define LEO_LD_SS1_MAP         0x01004000
+#define LEO_UNK_MAP            0x01005000
+#define LEO_LX_KRN_MAP         0x01006000
+#define LEO_LC_SS0_KRN_MAP     0x01007000
+#define LEO_LC_SS1_KRN_MAP     0x01008000
+#define LEO_LD_GBL_MAP         0x01009000
+#define LEO_UNK2_MAP           0x0100a000
+
+#ifdef __KERNEL__
+struct  fbcmap32 {
+        int             index;          /* first element (0 origin) */
+        int             count;
+        u32             red;
+        u32             green;
+        u32             blue;
+};
+
+#define FBIOPUTCMAP32   _IOW('F', 3, struct fbcmap32)
+#define FBIOGETCMAP32   _IOW('F', 4, struct fbcmap32)
+
+struct fbcursor32 {
+        short set;              /* what to set, choose from the list above */
+        short enable;           /* cursor on/off */
+        struct fbcurpos pos;    /* cursor position */
+        struct fbcurpos hot;    /* cursor hot spot */
+        struct fbcmap32 cmap;   /* color map info */
+        struct fbcurpos size;   /* cursor bit map size */
+        u32     image;          /* cursor image bits */
+        u32     mask;           /* cursor mask bits */
+};
+
+#define FBIOSCURSOR32   _IOW('F', 24, struct fbcursor32)
+#define FBIOGCURSOR32   _IOW('F', 25, struct fbcursor32)
+#endif
+
+#endif /* __LINUX_FBIO_H */
diff --git a/arch/m68k/include/asm/fcntl.h b/arch/m68k/include/asm/fcntl.h
new file mode 100644
index 000000000000..1c369b20dc45
--- /dev/null
+++ b/arch/m68k/include/asm/fcntl.h
@@ -0,0 +1,11 @@
+#ifndef _M68K_FCNTL_H
+#define _M68K_FCNTL_H
+
+#define O_DIRECTORY     040000  /* must be a directory */
+#define O_NOFOLLOW      0100000 /* don't follow links */
+#define O_DIRECT        0200000 /* direct disk access hint - currently ignored */
+#define O_LARGEFILE     0400000
+
+#include <asm-generic/fcntl.h>
+
+#endif /* _M68K_FCNTL_H */
diff --git a/arch/m68k/include/asm/flat.h b/arch/m68k/include/asm/flat.h
new file mode 100644
index 000000000000..814b5174a8e0
--- /dev/null
+++ b/arch/m68k/include/asm/flat.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-m68knommu/flat.h -- uClinux flat-format executables
+ */
+
+#ifndef __M68KNOMMU_FLAT_H__
+#define __M68KNOMMU_FLAT_H__
+
+#define flat_stack_align(sp)                    /* nothing needed */
+#define flat_argvp_envp_on_stack()              1
+#define flat_old_ram_flag(flags)                (flags)
+#define flat_reloc_valid(reloc, size)           ((reloc) <= (size))
+#define flat_get_addr_from_rp(rp, relval, flags, p)     get_unaligned(rp)
+#define flat_put_addr_at_rp(rp, val, relval)    put_unaligned(val,rp)
+#define flat_get_relocate_addr(rel)             (rel)
+#define flat_set_persistent(relval, p)          0
+
+#endif /* __M68KNOMMU_FLAT_H__ */
diff --git a/arch/m68k/include/asm/floppy.h b/arch/m68k/include/asm/floppy.h
new file mode 100644
index 000000000000..697d50393dd0
--- /dev/null
+++ b/arch/m68k/include/asm/floppy.h
@@ -0,0 +1,254 @@
+/*
+ * Implementation independent bits of the Floppy driver.
+ *
+ * much of this file is derived from what was originally the Q40 floppy driver.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999, 2000, 2001
+ *
+ * Sun3x support added 2/4/2000 Sam Creasey (sammy@sammy.net)
+ *
+ */
+
+#include <asm/io.h>
+
+#include <linux/vmalloc.h>
+
+asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id);
+
+/* constants... */
+
+#undef MAX_DMA_ADDRESS
+#define MAX_DMA_ADDRESS   0x00  /* nothing like that */
+
+
+/*
+ * Again, the CMOS information doesn't work on m68k..
+ */
+#define FLOPPY0_TYPE (MACH_IS_Q40 ? 6 : 4)
+#define FLOPPY1_TYPE 0
+
+/* basically PC init + set use_virtual_dma */
+#define  FDC1 m68k_floppy_init()
+
+#define N_FDC 1
+#define N_DRIVE 8
+
+
+/* vdma globals adapted from asm-i386/floppy.h */
+
+static int virtual_dma_count=0;
+static int virtual_dma_residue=0;
+static char *virtual_dma_addr=NULL;
+static int virtual_dma_mode=0;
+static int doing_pdma=0;
+
+#include <asm/sun3xflop.h>
+
+extern spinlock_t  dma_spin_lock;
+
+static __inline__ unsigned long claim_dma_lock(void)
+{
+        unsigned long flags;
+        spin_lock_irqsave(&dma_spin_lock, flags);
+        return flags;
+}
+
+static __inline__ void release_dma_lock(unsigned long flags)
+{
+        spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+
+static __inline__ unsigned char fd_inb(int port)
+{
+        if(MACH_IS_Q40)
+                return inb_p(port);
+        else if(MACH_IS_SUN3X)
+                return sun3x_82072_fd_inb(port);
+        return 0;
+}
+
+static __inline__ void fd_outb(unsigned char value, int port)
+{
+        if(MACH_IS_Q40)
+                outb_p(value, port);
+        else if(MACH_IS_SUN3X)
+                sun3x_82072_fd_outb(value, port);
+}
+
+
+static int fd_request_irq(void)
+{
+        if(MACH_IS_Q40)
+                return request_irq(FLOPPY_IRQ, floppy_hardint,
+                                   IRQF_DISABLED, "floppy", floppy_hardint);
+        else if(MACH_IS_SUN3X)
+                return sun3xflop_request_irq();
+        return -ENXIO;
+}
+
+static void fd_free_irq(void)
+{
+        if(MACH_IS_Q40)
+                free_irq(FLOPPY_IRQ, floppy_hardint);
+}
+
+#define fd_request_dma()        vdma_request_dma(FLOPPY_DMA,"floppy")
+#define fd_get_dma_residue()    vdma_get_dma_residue(FLOPPY_DMA)
+#define fd_dma_mem_alloc(size)  vdma_mem_alloc(size)
+#define fd_dma_setup(addr, size, mode, io) vdma_dma_setup(addr, size, mode, io)
+
+#define fd_enable_irq()           /* nothing... */
+#define fd_disable_irq()          /* nothing... */
+
+#define fd_free_dma()             /* nothing */
+
+/* No 64k boundary crossing problems on Q40 - no DMA at all */
+#define CROSS_64KB(a,s) (0)
+
+#define DMA_MODE_READ  0x44    /* i386 look-alike */
+#define DMA_MODE_WRITE 0x48
+
+
+static int m68k_floppy_init(void)
+{
+  use_virtual_dma =1;
+  can_use_virtual_dma = 1;
+
+
+  if (MACH_IS_Q40)
+          return 0x3f0;
+  else if(MACH_IS_SUN3X)
+          return sun3xflop_init();
+  else
+    return -1;
+}
+
+
+static int vdma_request_dma(unsigned int dmanr, const char * device_id)
+{
+        return 0;
+}
+
+
+static int vdma_get_dma_residue(unsigned int dummy)
+{
+        return virtual_dma_count + virtual_dma_residue;
+}
+
+
+static unsigned long vdma_mem_alloc(unsigned long size)
+{
+        return (unsigned long) vmalloc(size);
+
+}
+
+static void _fd_dma_mem_free(unsigned long addr, unsigned long size)
+{
+        vfree((void *)addr);
+}
+#define fd_dma_mem_free(addr,size) _fd_dma_mem_free(addr, size)
+
+
+/* choose_dma_mode ???*/
+
+static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
+{
+        doing_pdma = 1;
+        virtual_dma_port = (MACH_IS_Q40 ? io : 0);
+        virtual_dma_mode = (mode  == DMA_MODE_WRITE);
+        virtual_dma_addr = addr;
+        virtual_dma_count = size;
+        virtual_dma_residue = 0;
+        return 0;
+}
+
+
+
+static void fd_disable_dma(void)
+{
+        doing_pdma = 0;
+        virtual_dma_residue += virtual_dma_count;
+        virtual_dma_count=0;
+}
+
+
+
+/* this is the only truly Q40 specific function */
+
+asmlinkage irqreturn_t floppy_hardint(int irq, void *dev_id)
+{
+        register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+        static int calls=0;
+        static int bytes=0;
+        static int dma_wait=0;
+#endif
+        if(!doing_pdma) {
+                floppy_interrupt(irq, dev_id);
+                return IRQ_HANDLED;
+        }
+
+#ifdef TRACE_FLPY_INT
+        if(!calls)
+                bytes = virtual_dma_count;
+#endif
+
+        {
+                register int lcount;
+                register char *lptr;
+
+                /* serve 1st byte fast: */
+
+                st=1;
+                for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+                    lcount; lcount--, lptr++) {
+                        st=inb(virtual_dma_port+4) & 0xa0 ;
+                        if(st != 0xa0)
+                                break;
+                        if(virtual_dma_mode)
+                                outb_p(*lptr, virtual_dma_port+5);
+                        else
+                                *lptr = inb_p(virtual_dma_port+5);
+                }
+
+                virtual_dma_count = lcount;
+                virtual_dma_addr = lptr;
+                st = inb(virtual_dma_port+4);
+        }
+
+#ifdef TRACE_FLPY_INT
+        calls++;
+#endif
+        if(st == 0x20)
+                return IRQ_HANDLED;
+        if(!(st & 0x20)) {
+                virtual_dma_residue += virtual_dma_count;
+                virtual_dma_count=0;
+#ifdef TRACE_FLPY_INT
+                printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
+                       virtual_dma_count, virtual_dma_residue, calls, bytes,
+                       dma_wait);
+                calls = 0;
+                dma_wait=0;
+#endif
+                doing_pdma = 0;
+                floppy_interrupt(irq, dev_id);
+                return IRQ_HANDLED;
+        }
+#ifdef TRACE_FLPY_INT
+        if(!virtual_dma_count)
+                dma_wait++;
+#endif
+        return IRQ_HANDLED;
+}
+
+#define EXTRA_FLOPPY_PARAMS
diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h
new file mode 100644
index 000000000000..e19bc5ed9c37
--- /dev/null
+++ b/arch/m68k/include/asm/fpu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "fpu_no.h"
+#else
+#include "fpu_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/fpu_mm.h b/arch/m68k/include/asm/fpu_mm.h
new file mode 100644
index 000000000000..ffb6b8cfc6d5
--- /dev/null
+++ b/arch/m68k/include/asm/fpu_mm.h
@@ -0,0 +1,21 @@
+#ifndef __M68K_FPU_H
+#define __M68K_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216)
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96)
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28)
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12)
+#else
+#define FPSTATESIZE (0)
+#endif
+
+#endif /* __M68K_FPU_H */
diff --git a/arch/m68k/include/asm/fpu_no.h b/arch/m68k/include/asm/fpu_no.h
new file mode 100644
index 000000000000..b16b2e4fca2a
--- /dev/null
+++ b/arch/m68k/include/asm/fpu_no.h
@@ -0,0 +1,21 @@
+#ifndef __M68KNOMMU_FPU_H
+#define __M68KNOMMU_FPU_H
+
+
+/*
+ * MAX floating point unit state size (FSAVE/FRESTORE)
+ */
+#if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#define FPSTATESIZE (216/sizeof(unsigned char))
+#elif defined(CONFIG_M68040)
+#define FPSTATESIZE (96/sizeof(unsigned char))
+#elif defined(CONFIG_M68KFPU_EMU)
+#define FPSTATESIZE (28/sizeof(unsigned char))
+#elif defined(CONFIG_M68060)
+#define FPSTATESIZE (12/sizeof(unsigned char))
+#else
+/* Assume no FP unit present then... */
+#define FPSTATESIZE (2) /* dummy size */
+#endif
+
+#endif /* __M68K_FPU_H */
diff --git a/arch/m68k/include/asm/futex.h b/arch/m68k/include/asm/futex.h
new file mode 100644
index 000000000000..6a332a9f099c
--- /dev/null
+++ b/arch/m68k/include/asm/futex.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_FUTEX_H
+#define _ASM_FUTEX_H
+
+#include <asm-generic/futex.h>
+
+#endif
diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h
new file mode 100644
index 000000000000..56d0d5db231c
--- /dev/null
+++ b/arch/m68k/include/asm/hardirq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hardirq_no.h"
+#else
+#include "hardirq_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h
new file mode 100644
index 000000000000..394ee946015c
--- /dev/null
+++ b/arch/m68k/include/asm/hardirq_mm.h
@@ -0,0 +1,16 @@
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+        unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS    8
+
+#endif
diff --git a/arch/m68k/include/asm/hardirq_no.h b/arch/m68k/include/asm/hardirq_no.h
new file mode 100644
index 000000000000..bfad28149a49
--- /dev/null
+++ b/arch/m68k/include/asm/hardirq_no.h
@@ -0,0 +1,27 @@
+#ifndef __M68K_HARDIRQ_H
+#define __M68K_HARDIRQ_H
+
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/irq.h>
+
+typedef struct {
+        unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>  /* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS    8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+void ack_bad_irq(unsigned int irq);
+
+#endif /* __M68K_HARDIRQ_H */
diff --git a/arch/m68k/include/asm/hp300hw.h b/arch/m68k/include/asm/hp300hw.h
new file mode 100644
index 000000000000..d998ea67c19c
--- /dev/null
+++ b/arch/m68k/include/asm/hp300hw.h
@@ -0,0 +1,25 @@
+#ifndef _M68K_HP300HW_H
+#define _M68K_HP300HW_H
+
+extern unsigned long hp300_model;
+
+/* This information was taken from NetBSD */
+#define HP_320          (0)     /* 16MHz 68020+HP MMU+16K external cache */
+#define HP_330          (1)     /* 16MHz 68020+68851 MMU */
+#define HP_340          (2)     /* 16MHz 68030 */
+#define HP_345          (3)     /* 50MHz 68030+32K external cache */
+#define HP_350          (4)     /* 25MHz 68020+HP MMU+32K external cache */
+#define HP_360          (5)     /* 25MHz 68030 */
+#define HP_370          (6)     /* 33MHz 68030+64K external cache */
+#define HP_375          (7)     /* 50MHz 68030+32K external cache */
+#define HP_380          (8)     /* 25MHz 68040 */
+#define HP_385          (9)     /* 33MHz 68040 */
+
+#define HP_400          (10)    /* 50MHz 68030+32K external cache */
+#define HP_425T         (11)    /* 25MHz 68040 - model 425t */
+#define HP_425S         (12)    /* 25MHz 68040 - model 425s */
+#define HP_425E         (13)    /* 25MHz 68040 - model 425e */
+#define HP_433T         (14)    /* 33MHz 68040 - model 433t */
+#define HP_433S         (15)    /* 33MHz 68040 - model 433s */
+
+#endif /* _M68K_HP300HW_H */
diff --git a/arch/m68k/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq.h
new file mode 100644
index 000000000000..e19526015890
--- /dev/null
+++ b/arch/m68k/include/asm/hw_irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "hw_irq_no.h"
+#else
+#include "hw_irq_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/hw_irq_mm.h b/arch/m68k/include/asm/hw_irq_mm.h
new file mode 100644
index 000000000000..eacef0951fbf
--- /dev/null
+++ b/arch/m68k/include/asm/hw_irq_mm.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_M68K_HW_IRQ_H
+#define __ASM_M68K_HW_IRQ_H
+
+/* Dummy include. */
+
+#endif
diff --git a/arch/m68k/include/asm/hw_irq_no.h b/arch/m68k/include/asm/hw_irq_no.h
new file mode 100644
index 000000000000..f3ec9e5ae049
--- /dev/null
+++ b/arch/m68k/include/asm/hw_irq_no.h
@@ -0,0 +1,4 @@
+#ifndef __M68KNOMMU_HW_IRQ_H__
+#define __M68KNOMMU_HW_IRQ_H__
+
+#endif /* __M68KNOMMU_HW_IRQ_H__ */
diff --git a/arch/m68k/include/asm/hwtest.h b/arch/m68k/include/asm/hwtest.h
new file mode 100644
index 000000000000..402c8a4401fe
--- /dev/null
+++ b/arch/m68k/include/asm/hwtest.h
@@ -0,0 +1,15 @@
+/* Routines to test for presence/absence of hardware registers:
+ * see arch/m68k/mm/hwtest.c.
+ *  -- PMM <pmaydell@chiark.greenend.org.uk> 05/1998
+ *
+ * Removed __init from decls.  We might want them in modules, and
+ * the code is tiny anyway.  16/5/98 pb
+ */
+
+#ifndef __ASM_HWTEST_H
+#define __ASM_HWTEST_H
+
+extern int hwreg_present(volatile void *regp);
+extern int hwreg_write(volatile void *regp, unsigned short val);
+
+#endif
diff --git a/arch/m68k/include/asm/ide.h b/arch/m68k/include/asm/ide.h
new file mode 100644
index 000000000000..b996a3c8cff5
--- /dev/null
+++ b/arch/m68k/include/asm/ide.h
@@ -0,0 +1,130 @@
+/*
+ *  linux/include/asm-m68k/ide.h
+ *
+ *  Copyright (C) 1994-1996  Linus Torvalds & authors
+ */
+
+/* Copyright(c) 1996 Kars de Jong */
+/* Based on the ide driver from 1.2.13pl8 */
+
+/*
+ * Credits (alphabetical):
+ *
+ *  - Bjoern Brauel
+ *  - Kars de Jong
+ *  - Torsten Ebeling
+ *  - Dwight Engen
+ *  - Thorsten Floeck
+ *  - Roman Hodek
+ *  - Guenther Kelleter
+ *  - Chris Lawrence
+ *  - Michael Rausch
+ *  - Christian Sauer
+ *  - Michael Schmitz
+ *  - Jes Soerensen
+ *  - Michael Thurm
+ *  - Geert Uytterhoeven
+ */
+
+#ifndef _M68K_IDE_H
+#define _M68K_IDE_H
+
+#ifdef __KERNEL__
+
+
+#include <asm/setup.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_ATARI
+#include <linux/interrupt.h>
+#include <asm/atari_stdma.h>
+#endif
+
+#ifdef CONFIG_MAC
+#include <asm/macints.h>
+#endif
+
+/*
+ * Get rid of defs from io.h - ide has its private and conflicting versions
+ * Since so far no single m68k platform uses ISA/PCI I/O space for IDE, we
+ * always use the `raw' MMIO versions
+ */
+#undef inb
+#undef inw
+#undef insw
+#undef inl
+#undef insl
+#undef outb
+#undef outw
+#undef outsw
+#undef outl
+#undef outsl
+#undef readb
+#undef readw
+#undef readl
+#undef writeb
+#undef writew
+#undef writel
+
+#define inb                             in_8
+#define inw                             in_be16
+#define insw(port, addr, n)             raw_insw((u16 *)port, addr, n)
+#define inl                             in_be32
+#define insl(port, addr, n)             raw_insl((u32 *)port, addr, n)
+#define outb(val, port)                 out_8(port, val)
+#define outw(val, port)                 out_be16(port, val)
+#define outsw(port, addr, n)            raw_outsw((u16 *)port, addr, n)
+#define outl(val, port)                 out_be32(port, val)
+#define outsl(port, addr, n)            raw_outsl((u32 *)port, addr, n)
+#define readb                           in_8
+#define readw                           in_be16
+#define __ide_mm_insw(port, addr, n)    raw_insw((u16 *)port, addr, n)
+#define readl                           in_be32
+#define __ide_mm_insl(port, addr, n)    raw_insl((u32 *)port, addr, n)
+#define writeb(val, port)               out_8(port, val)
+#define writew(val, port)               out_be16(port, val)
+#define __ide_mm_outsw(port, addr, n)   raw_outsw((u16 *)port, addr, n)
+#define writel(val, port)               out_be32(port, val)
+#define __ide_mm_outsl(port, addr, n)   raw_outsl((u32 *)port, addr, n)
+#if defined(CONFIG_ATARI) || defined(CONFIG_Q40)
+#define insw_swapw(port, addr, n)       raw_insw_swapw((u16 *)port, addr, n)
+#define outsw_swapw(port, addr, n)      raw_outsw_swapw((u16 *)port, addr, n)
+#endif
+
+#ifdef CONFIG_BLK_DEV_FALCON_IDE
+#define IDE_ARCH_LOCK
+
+extern int falconide_intr_lock;
+
+static __inline__ void ide_release_lock (void)
+{
+        if (MACH_IS_ATARI) {
+                if (falconide_intr_lock == 0) {
+                        printk("ide_release_lock: bug\n");
+                        return;
+                }
+                falconide_intr_lock = 0;
+                stdma_release();
+        }
+}
+
+static __inline__ void
+ide_get_lock(irq_handler_t handler, void *data)
+{
+        if (MACH_IS_ATARI) {
+                if (falconide_intr_lock == 0) {
+                        if (in_interrupt() > 0)
+                                panic( "Falcon IDE hasn't ST-DMA lock in interrupt" );
+                        stdma_lock(handler, data);
+                        falconide_intr_lock = 1;
+                }
+        }
+}
+#endif /* CONFIG_BLK_DEV_FALCON_IDE */
+
+#define IDE_ARCH_ACK_INTR
+#define ide_ack_intr(hwif)      ((hwif)->ack_intr ? (hwif)->ack_intr(hwif) : 1)
+
+#endif /* __KERNEL__ */
+#endif /* _M68K_IDE_H */
diff --git a/arch/m68k/include/asm/idprom.h b/arch/m68k/include/asm/idprom.h
new file mode 100644
index 000000000000..160616a89e05
--- /dev/null
+++ b/arch/m68k/include/asm/idprom.h
@@ -0,0 +1,27 @@
+#ifndef _M68K_IDPROM_H
+#define _M68K_IDPROM_H
+/*
+ * idprom.h: Macros and defines for idprom routines
+ *
+ * Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#include <linux/types.h>
+
+struct idprom {
+        u8              id_format;      /* Format identifier (always 0x01) */
+        u8              id_machtype;    /* Machine type */
+        u8              id_ethaddr[6];  /* Hardware ethernet address */
+        s32             id_date;        /* Date of manufacture */
+        u32             id_sernum:24;   /* Unique serial number */
+        u8              id_cksum;       /* Checksum - xor of the data bytes */
+        u8              reserved[16];
+};
+
+extern struct idprom *idprom;
+extern void idprom_init(void);
+
+/* Sun3: in control space */
+#define SUN3_IDPROM_BASE        0x00000000
+
+#endif /* !(_M68K_IDPROM_H) */
diff --git a/arch/m68k/include/asm/intersil.h b/arch/m68k/include/asm/intersil.h
new file mode 100644
index 000000000000..f482902cac8a
--- /dev/null
+++ b/arch/m68k/include/asm/intersil.h
@@ -0,0 +1,48 @@
+#ifndef _SUN3_INTERSIL_H
+#define _SUN3_INTERSIL_H
+/* bits 0 and 1 */
+#define INTERSIL_FREQ_32K        0x00
+#define INTERSIL_FREQ_1M         0x01
+#define INTERSIL_FREQ_2M         0x02
+#define INTERSIL_FREQ_4M         0x03
+
+/* bit 2 */
+#define INTERSIL_12H_MODE   0x00
+#define INTERSIL_24H_MODE   0x04
+
+/* bit 3 */
+#define INTERSIL_STOP            0x00
+#define INTERSIL_RUN             0x08
+
+/* bit 4 */
+#define INTERSIL_INT_ENABLE     0x10
+#define INTERSIL_INT_DISABLE    0x00
+
+/* bit 5 */
+#define INTERSIL_MODE_NORMAL     0x00
+#define INTERSIL_MODE_TEST       0x20
+
+#define INTERSIL_HZ_100_MASK     0x02
+
+struct intersil_dt {
+        unsigned char   csec;
+        unsigned char   hour;
+        unsigned char   minute;
+        unsigned char   second;
+        unsigned char   month;
+        unsigned char   day;
+        unsigned char   year;
+        unsigned char   weekday;
+};
+
+struct intersil_7170 {
+        struct intersil_dt counter;
+        struct intersil_dt alarm;
+        unsigned char   int_reg;
+        unsigned char   cmd_reg;
+};
+
+extern volatile char* clock_va;
+#define intersil_clock ((volatile struct intersil_7170 *) clock_va)
+#define intersil_clear() (void)intersil_clock->int_reg
+#endif
diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h
new file mode 100644
index 000000000000..c7210ba184ea
--- /dev/null
+++ b/arch/m68k/include/asm/io.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "io_no.h"
+#else
+#include "io_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
new file mode 100644
index 000000000000..9e673e3bd434
--- /dev/null
+++ b/arch/m68k/include/asm/io_mm.h
@@ -0,0 +1,369 @@
+/*
+ * linux/include/asm-m68k/io.h
+ *
+ * 4/1/00 RZ: - rewritten to avoid clashes between ISA/PCI and other
+ *              IO access
+ *            - added Q40 support
+ *            - added skeleton for GG-II and Amiga PCMCIA
+ * 2/3/01 RZ: - moved a few more defs into raw_io.h
+ *
+ * inX/outX should not be used by any driver unless it does
+ * ISA access. Other drivers should use function defined in raw_io.h
+ * or define its own macros on top of these.
+ *
+ *    inX(),outX()              are for ISA I/O
+ *    isa_readX(),isa_writeX()  are for ISA memory
+ */
+
+#ifndef _IO_H
+#define _IO_H
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <asm/raw_io.h>
+#include <asm/virtconvert.h>
+
+#include <asm-generic/iomap.h>
+
+#ifdef CONFIG_ATARI
+#include <asm/atarihw.h>
+#endif
+
+
+/*
+ * IO/MEM definitions for various ISA bridges
+ */
+
+
+#ifdef CONFIG_Q40
+
+#define q40_isa_io_base  0xff400000
+#define q40_isa_mem_base 0xff800000
+
+#define Q40_ISA_IO_B(ioaddr) (q40_isa_io_base+1+4*((unsigned long)(ioaddr)))
+#define Q40_ISA_IO_W(ioaddr) (q40_isa_io_base+  4*((unsigned long)(ioaddr)))
+#define Q40_ISA_MEM_B(madr)  (q40_isa_mem_base+1+4*((unsigned long)(madr)))
+#define Q40_ISA_MEM_W(madr)  (q40_isa_mem_base+  4*((unsigned long)(madr)))
+
+#define MULTI_ISA 0
+#endif /* Q40 */
+
+/* GG-II Zorro to ISA bridge */
+#ifdef CONFIG_GG2
+
+extern unsigned long gg2_isa_base;
+#define GG2_ISA_IO_B(ioaddr) (gg2_isa_base+1+((unsigned long)(ioaddr)*4))
+#define GG2_ISA_IO_W(ioaddr) (gg2_isa_base+  ((unsigned long)(ioaddr)*4))
+#define GG2_ISA_MEM_B(madr)  (gg2_isa_base+1+(((unsigned long)(madr)*4) & 0xfffff))
+#define GG2_ISA_MEM_W(madr)  (gg2_isa_base+  (((unsigned long)(madr)*4) & 0xfffff))
+
+#ifndef MULTI_ISA
+#define MULTI_ISA 0
+#else
+#undef MULTI_ISA
+#define MULTI_ISA 1
+#endif
+#endif /* GG2 */
+
+#ifdef CONFIG_AMIGA_PCMCIA
+#include <asm/amigayle.h>
+
+#define AG_ISA_IO_B(ioaddr) ( GAYLE_IO+(ioaddr)+(((ioaddr)&1)*GAYLE_ODD) )
+#define AG_ISA_IO_W(ioaddr) ( GAYLE_IO+(ioaddr) )
+
+#ifndef MULTI_ISA
+#define MULTI_ISA 0
+#else
+#undef MULTI_ISA
+#define MULTI_ISA 1
+#endif
+#endif /* AMIGA_PCMCIA */
+
+
+
+#ifdef CONFIG_ISA
+
+#if MULTI_ISA == 0
+#undef MULTI_ISA
+#endif
+
+#define ISA_TYPE_Q40 (1)
+#define ISA_TYPE_GG2 (2)
+#define ISA_TYPE_AG  (3)
+
+#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
+#define ISA_TYPE ISA_TYPE_Q40
+#define ISA_SEX  0
+#endif
+#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
+#define ISA_TYPE ISA_TYPE_AG
+#define ISA_SEX  1
+#endif
+#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
+#define ISA_TYPE ISA_TYPE_GG2
+#define ISA_SEX  0
+#endif
+
+#ifdef MULTI_ISA
+extern int isa_type;
+extern int isa_sex;
+
+#define ISA_TYPE isa_type
+#define ISA_SEX  isa_sex
+#endif
+
+/*
+ * define inline addr translation functions. Normally only one variant will
+ * be compiled in so the case statement will be optimised away
+ */
+
+static inline u8 __iomem *isa_itb(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
+#endif
+#ifdef CONFIG_GG2
+    case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
+#endif
+    default: return NULL; /* avoid warnings, just in case */
+    }
+}
+static inline u16 __iomem *isa_itw(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
+#endif
+#ifdef CONFIG_GG2
+    case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
+#endif
+    default: return NULL; /* avoid warnings, just in case */
+    }
+}
+static inline u32 __iomem *isa_itl(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
+#endif
+    default: return 0; /* avoid warnings, just in case */
+    }
+}
+static inline u8 __iomem *isa_mtb(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
+#endif
+#ifdef CONFIG_GG2
+    case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG: return (u8 __iomem *)addr;
+#endif
+    default: return NULL; /* avoid warnings, just in case */
+    }
+}
+static inline u16 __iomem *isa_mtw(unsigned long addr)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
+#endif
+#ifdef CONFIG_GG2
+    case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG: return (u16 __iomem *)addr;
+#endif
+    default: return NULL; /* avoid warnings, just in case */
+    }
+}
+
+
+#define isa_inb(port)      in_8(isa_itb(port))
+#define isa_inw(port)      (ISA_SEX ? in_be16(isa_itw(port)) : in_le16(isa_itw(port)))
+#define isa_inl(port)      (ISA_SEX ? in_be32(isa_itl(port)) : in_le32(isa_itl(port)))
+#define isa_outb(val,port) out_8(isa_itb(port),(val))
+#define isa_outw(val,port) (ISA_SEX ? out_be16(isa_itw(port),(val)) : out_le16(isa_itw(port),(val)))
+#define isa_outl(val,port) (ISA_SEX ? out_be32(isa_itl(port),(val)) : out_le32(isa_itl(port),(val)))
+
+#define isa_readb(p)       in_8(isa_mtb((unsigned long)(p)))
+#define isa_readw(p)       \
+        (ISA_SEX ? in_be16(isa_mtw((unsigned long)(p))) \
+                 : in_le16(isa_mtw((unsigned long)(p))))
+#define isa_writeb(val,p)  out_8(isa_mtb((unsigned long)(p)),(val))
+#define isa_writew(val,p)  \
+        (ISA_SEX ? out_be16(isa_mtw((unsigned long)(p)),(val))  \
+                 : out_le16(isa_mtw((unsigned long)(p)),(val)))
+
+static inline void isa_delay(void)
+{
+  switch(ISA_TYPE)
+    {
+#ifdef CONFIG_Q40
+    case ISA_TYPE_Q40: isa_outb(0,0x80); break;
+#endif
+#ifdef CONFIG_GG2
+    case ISA_TYPE_GG2: break;
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
+    case ISA_TYPE_AG: break;
+#endif
+    default: break; /* avoid warnings */
+    }
+}
+
+#define isa_inb_p(p)      ({u8 v=isa_inb(p);isa_delay();v;})
+#define isa_outb_p(v,p)   ({isa_outb((v),(p));isa_delay();})
+#define isa_inw_p(p)      ({u16 v=isa_inw(p);isa_delay();v;})
+#define isa_outw_p(v,p)   ({isa_outw((v),(p));isa_delay();})
+#define isa_inl_p(p)      ({u32 v=isa_inl(p);isa_delay();v;})
+#define isa_outl_p(v,p)   ({isa_outl((v),(p));isa_delay();})
+
+#define isa_insb(port, buf, nr) raw_insb(isa_itb(port), (u8 *)(buf), (nr))
+#define isa_outsb(port, buf, nr) raw_outsb(isa_itb(port), (u8 *)(buf), (nr))
+
+#define isa_insw(port, buf, nr)     \
+       (ISA_SEX ? raw_insw(isa_itw(port), (u16 *)(buf), (nr)) :    \
+                  raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
+
+#define isa_outsw(port, buf, nr)    \
+       (ISA_SEX ? raw_outsw(isa_itw(port), (u16 *)(buf), (nr)) :  \
+                  raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)))
+
+#define isa_insl(port, buf, nr)     \
+       (ISA_SEX ? raw_insl(isa_itl(port), (u32 *)(buf), (nr)) :    \
+                  raw_insw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
+
+#define isa_outsl(port, buf, nr)    \
+       (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) :  \
+                  raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
+
+
+#define inb     isa_inb
+#define inb_p   isa_inb_p
+#define outb    isa_outb
+#define outb_p  isa_outb_p
+#define inw     isa_inw
+#define inw_p   isa_inw_p
+#define outw    isa_outw
+#define outw_p  isa_outw_p
+#define inl     isa_inl
+#define inl_p   isa_inl_p
+#define outl    isa_outl
+#define outl_p  isa_outl_p
+#define insb    isa_insb
+#define insw    isa_insw
+#define insl    isa_insl
+#define outsb   isa_outsb
+#define outsw   isa_outsw
+#define outsl   isa_outsl
+#define readb   isa_readb
+#define readw   isa_readw
+#define writeb  isa_writeb
+#define writew  isa_writew
+
+#else  /* CONFIG_ISA */
+
+/*
+ * We need to define dummy functions for GENERIC_IOMAP support.
+ */
+#define inb(port)          0xff
+#define inb_p(port)        0xff
+#define outb(val,port)     ((void)0)
+#define outb_p(val,port)   ((void)0)
+#define inw(port)          0xffff
+#define outw(val,port)     ((void)0)
+#define inl(port)          0xffffffffUL
+#define outl(val,port)     ((void)0)
+
+#define insb(port,buf,nr)  ((void)0)
+#define outsb(port,buf,nr) ((void)0)
+#define insw(port,buf,nr)  ((void)0)
+#define outsw(port,buf,nr) ((void)0)
+#define insl(port,buf,nr)  ((void)0)
+#define outsl(port,buf,nr) ((void)0)
+
+/*
+ * These should be valid on any ioremap()ed region
+ */
+#define readb(addr)      in_8(addr)
+#define writeb(val,addr) out_8((addr),(val))
+#define readw(addr)      in_le16(addr)
+#define writew(val,addr) out_le16((addr),(val))
+
+#endif /* CONFIG_ISA */
+
+#define readl(addr)      in_le32(addr)
+#define writel(val,addr) out_le32((addr),(val))
+
+#define mmiowb()
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void __iomem *ioremap_writethrough(unsigned long physaddr,
+                                         unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void __iomem *ioremap_fullcache(unsigned long physaddr,
+                                      unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
+{
+        __builtin_memset((void __force *) addr, val, count);
+}
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
+{
+        __builtin_memcpy(dst, (void __force *) src, count);
+}
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
+{
+        __builtin_memcpy((void __force *) dst, src, count);
+}
+
+#ifndef CONFIG_SUN3
+#define IO_SPACE_LIMIT 0xffff
+#else
+#define IO_SPACE_LIMIT 0x0fffffff
+#endif
+
+#endif /* __KERNEL__ */
+
+#define __ARCH_HAS_NO_PAGE_ZERO_MAPPED          1
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* _IO_H */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
new file mode 100644
index 000000000000..6adef1ee2082
--- /dev/null
+++ b/arch/m68k/include/asm/io_no.h
@@ -0,0 +1,194 @@
+#ifndef _M68KNOMMU_IO_H
+#define _M68KNOMMU_IO_H
+
+#ifdef __KERNEL__
+
+
+/*
+ * These are for ISA/PCI shared memory _only_ and should never be used
+ * on any other type of memory, including Zorro memory. They are meant to
+ * access the bus in the bus byte order which is little-endian!.
+ *
+ * readX/writeX() are used to access memory mapped devices. On some
+ * architectures the memory mapped IO stuff needs to be accessed
+ * differently. On the m68k architecture, we just read/write the
+ * memory location directly.
+ */
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesireable for some devices.
+ */
+
+/*
+ * swap functions are sometimes needed to interface little-endian hardware
+ */
+static inline unsigned short _swapw(volatile unsigned short v)
+{
+    return ((v << 8) | (v >> 8));
+}
+
+static inline unsigned int _swapl(volatile unsigned long v)
+{
+    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
+}
+
+#define readb(addr) \
+    ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+    ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+    ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+static inline void io_outsb(unsigned int addr, void *buf, int len)
+{
+        volatile unsigned char *ap = (volatile unsigned char *) addr;
+        unsigned char *bp = (unsigned char *) buf;
+        while (len--)
+                *ap = *bp++;
+}
+
+static inline void io_outsw(unsigned int addr, void *buf, int len)
+{
+        volatile unsigned short *ap = (volatile unsigned short *) addr;
+        unsigned short *bp = (unsigned short *) buf;
+        while (len--)
+                *ap = _swapw(*bp++);
+}
+
+static inline void io_outsl(unsigned int addr, void *buf, int len)
+{
+        volatile unsigned int *ap = (volatile unsigned int *) addr;
+        unsigned int *bp = (unsigned int *) buf;
+        while (len--)
+                *ap = _swapl(*bp++);
+}
+
+static inline void io_insb(unsigned int addr, void *buf, int len)
+{
+        volatile unsigned char *ap = (volatile unsigned char *) addr;
+        unsigned char *bp = (unsigned char *) buf;
+        while (len--)
+                *bp++ = *ap;
+}
+
+static inline void io_insw(unsigned int addr, void *buf, int len)
+{
+        volatile unsigned short *ap = (volatile unsigned short *) addr;
+        unsigned short *bp = (unsigned short *) buf;
+        while (len--)
+                *bp++ = _swapw(*ap);
+}
+
+static inline void io_insl(unsigned int addr, void *buf, int len)
+{
+        volatile unsigned int *ap = (volatile unsigned int *) addr;
+        unsigned int *bp = (unsigned int *) buf;
+        while (len--)
+                *bp++ = _swapl(*ap);
+}
+
+#define mmiowb()
+
+/*
+ *      make the short names macros so specific devices
+ *      can override them as required
+ */
+
+#define memset_io(a,b,c)        memset((void *)(a),(b),(c))
+#define memcpy_fromio(a,b,c)    memcpy((a),(void *)(b),(c))
+#define memcpy_toio(a,b,c)      memcpy((void *)(a),(b),(c))
+
+#define inb(addr)    readb(addr)
+#define inw(addr)    readw(addr)
+#define inl(addr)    readl(addr)
+#define outb(x,addr) ((void) writeb(x,addr))
+#define outw(x,addr) ((void) writew(x,addr))
+#define outl(x,addr) ((void) writel(x,addr))
+
+#define inb_p(addr)    inb(addr)
+#define inw_p(addr)    inw(addr)
+#define inl_p(addr)    inl(addr)
+#define outb_p(x,addr) outb(x,addr)
+#define outw_p(x,addr) outw(x,addr)
+#define outl_p(x,addr) outl(x,addr)
+
+#define outsb(a,b,l) io_outsb(a,b,l)
+#define outsw(a,b,l) io_outsw(a,b,l)
+#define outsl(a,b,l) io_outsl(a,b,l)
+
+#define insb(a,b,l) io_insb(a,b,l)
+#define insw(a,b,l) io_insw(a,b,l)
+#define insl(a,b,l) io_insl(a,b,l)
+
+#define IO_SPACE_LIMIT 0xffff
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING              0
+#define IOMAP_NOCACHE_SER               1
+#define IOMAP_NOCACHE_NONSER            2
+#define IOMAP_WRITETHROUGH              3
+
+extern void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+static inline void *ioremap(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+static inline void *ioremap_writethrough(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+extern void iounmap(void *addr);
+
+/* Pages to physical address... */
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#define page_to_bus(page)       ((page - mem_map) << PAGE_SHIFT)
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+#define phys_to_virt(vaddr)     ((void *) (vaddr))
+#define virt_to_phys(vaddr)     ((unsigned long) (vaddr))
+
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)    __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)   p
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_IO_H */
diff --git a/arch/m68k/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h
new file mode 100644
index 000000000000..b279fe06dfe5
--- /dev/null
+++ b/arch/m68k/include/asm/ioctl.h
@@ -0,0 +1 @@
+#include <asm-generic/ioctl.h>
diff --git a/arch/m68k/include/asm/ioctls.h b/arch/m68k/include/asm/ioctls.h
new file mode 100644
index 000000000000..b8d2f4be7fd7
--- /dev/null
+++ b/arch/m68k/include/asm/ioctls.h
@@ -0,0 +1,84 @@
+#ifndef __ARCH_M68K_IOCTLS_H__
+#define __ARCH_M68K_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS          0x5401
+#define TCSETS          0x5402
+#define TCSETSW         0x5403
+#define TCSETSF         0x5404
+#define TCGETA          0x5405
+#define TCSETA          0x5406
+#define TCSETAW         0x5407
+#define TCSETAF         0x5408
+#define TCSBRK          0x5409
+#define TCXONC          0x540A
+#define TCFLSH          0x540B
+#define TIOCEXCL        0x540C
+#define TIOCNXCL        0x540D
+#define TIOCSCTTY       0x540E
+#define TIOCGPGRP       0x540F
+#define TIOCSPGRP       0x5410
+#define TIOCOUTQ        0x5411
+#define TIOCSTI         0x5412
+#define TIOCGWINSZ      0x5413
+#define TIOCSWINSZ      0x5414
+#define TIOCMGET        0x5415
+#define TIOCMBIS        0x5416
+#define TIOCMBIC        0x5417
+#define TIOCMSET        0x5418
+#define TIOCGSOFTCAR    0x5419
+#define TIOCSSOFTCAR    0x541A
+#define FIONREAD        0x541B
+#define TIOCINQ         FIONREAD
+#define TIOCLINUX       0x541C
+#define TIOCCONS        0x541D
+#define TIOCGSERIAL     0x541E
+#define TIOCSSERIAL     0x541F
+#define TIOCPKT         0x5420
+#define FIONBIO         0x5421
+#define TIOCNOTTY       0x5422
+#define TIOCSETD        0x5423
+#define TIOCGETD        0x5424
+#define TCSBRKP         0x5425  /* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK        0x5427  /* BSD compatibility */
+#define TIOCCBRK        0x5428  /* BSD compatibility */
+#define TIOCGSID        0x5429  /* Return the session ID of FD */
+#define TCGETS2         _IOR('T',0x2A, struct termios2)
+#define TCSETS2         _IOW('T',0x2B, struct termios2)
+#define TCSETSW2        _IOW('T',0x2C, struct termios2)
+#define TCSETSF2        _IOW('T',0x2D, struct termios2)
+#define TIOCGPTN        _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK      _IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX        0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX         0x5451
+#define FIOASYNC        0x5452
+#define TIOCSERCONFIG   0x5453
+#define TIOCSERGWILD    0x5454
+#define TIOCSERSWILD    0x5455
+#define TIOCGLCKTRMIOS  0x5456
+#define TIOCSLCKTRMIOS  0x5457
+#define TIOCSERGSTRUCT  0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT      0x545C  /* wait for a change on serial input line(s) */
+#define TIOCGICOUNT     0x545D  /* read serial port inline interrupt counts */
+#define FIOQSIZE        0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA             0
+#define TIOCPKT_FLUSHREAD        1
+#define TIOCPKT_FLUSHWRITE       2
+#define TIOCPKT_STOP             4
+#define TIOCPKT_START            8
+#define TIOCPKT_NOSTOP          16
+#define TIOCPKT_DOSTOP          32
+
+#define TIOCSER_TEMT    0x01    /* Transmitter physically empty */
+
+#endif /* __ARCH_M68K_IOCTLS_H__ */
diff --git a/arch/m68k/include/asm/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h
new file mode 100644
index 000000000000..a623ea3f0955
--- /dev/null
+++ b/arch/m68k/include/asm/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __m68k_IPCBUF_H__
+#define __m68k_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+        __kernel_key_t          key;
+        __kernel_uid32_t        uid;
+        __kernel_gid32_t        gid;
+        __kernel_uid32_t        cuid;
+        __kernel_gid32_t        cgid;
+        __kernel_mode_t         mode;
+        unsigned short          __pad1;
+        unsigned short          seq;
+        unsigned short          __pad2;
+        unsigned long           __unused1;
+        unsigned long           __unused2;
+};
+
+#endif /* __m68k_IPCBUF_H__ */
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
new file mode 100644
index 000000000000..d031416595b2
--- /dev/null
+++ b/arch/m68k/include/asm/irq.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "irq_no.h"
+#else
+#include "irq_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/irq_mm.h b/arch/m68k/include/asm/irq_mm.h
new file mode 100644
index 000000000000..226bfc0f21b1
--- /dev/null
+++ b/arch/m68k/include/asm/irq_mm.h
@@ -0,0 +1,125 @@
+#ifndef _M68K_IRQ_H_
+#define _M68K_IRQ_H_
+
+#include <linux/linkage.h>
+#include <linux/hardirq.h>
+#include <linux/spinlock_types.h>
+
+/*
+ * This should be the same as the max(NUM_X_SOURCES) for all the
+ * different m68k hosts compiled into the kernel.
+ * Currently the Atari has 72 and the Amiga 24, but if both are
+ * supported in the kernel it is better to make room for 72.
+ */
+#if defined(CONFIG_VME) || defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+#define NR_IRQS 200
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC)
+#define NR_IRQS 72
+#elif defined(CONFIG_Q40)
+#define NR_IRQS 43
+#elif defined(CONFIG_AMIGA)
+#define NR_IRQS 32
+#elif defined(CONFIG_APOLLO)
+#define NR_IRQS 24
+#elif defined(CONFIG_HP300)
+#define NR_IRQS 8
+#else
+#define NR_IRQS 0
+#endif
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+/*
+ * Interrupt source definitions
+ * General interrupt sources are the level 1-7.
+ * Adding an interrupt service routine for one of these sources
+ * results in the addition of that routine to a chain of routines.
+ * Each one is called in succession.  Each individual interrupt
+ * service routine should determine if the device associated with
+ * that routine requires service.
+ */
+
+#define IRQ_SPURIOUS    0
+
+#define IRQ_AUTO_1      1       /* level 1 interrupt */
+#define IRQ_AUTO_2      2       /* level 2 interrupt */
+#define IRQ_AUTO_3      3       /* level 3 interrupt */
+#define IRQ_AUTO_4      4       /* level 4 interrupt */
+#define IRQ_AUTO_5      5       /* level 5 interrupt */
+#define IRQ_AUTO_6      6       /* level 6 interrupt */
+#define IRQ_AUTO_7      7       /* level 7 interrupt (non-maskable) */
+
+#define IRQ_USER        8
+
+extern unsigned int irq_canonicalize(unsigned int irq);
+
+struct pt_regs;
+
+/*
+ * various flags for request_irq() - the Amiga now uses the standard
+ * mechanism like all other architectures - IRQF_DISABLED and
+ * IRQF_SHARED are your friends.
+ */
+#ifndef MACH_AMIGA_ONLY
+#define IRQ_FLG_LOCK    (0x0001)        /* handler is not replaceable   */
+#define IRQ_FLG_REPLACE (0x0002)        /* replace existing handler     */
+#define IRQ_FLG_FAST    (0x0004)
+#define IRQ_FLG_SLOW    (0x0008)
+#define IRQ_FLG_STD     (0x8000)        /* internally used              */
+#endif
+
+/*
+ * This structure is used to chain together the ISRs for a particular
+ * interrupt source (if it supports chaining).
+ */
+typedef struct irq_node {
+        int             (*handler)(int, void *);
+        void            *dev_id;
+        struct irq_node *next;
+        unsigned long   flags;
+        const char      *devname;
+} irq_node_t;
+
+/*
+ * This structure has only 4 elements for speed reasons
+ */
+struct irq_handler {
+        int             (*handler)(int, void *);
+        unsigned long   flags;
+        void            *dev_id;
+        const char      *devname;
+};
+
+struct irq_controller {
+        const char *name;
+        spinlock_t lock;
+        int (*startup)(unsigned int irq);
+        void (*shutdown)(unsigned int irq);
+        void (*enable)(unsigned int irq);
+        void (*disable)(unsigned int irq);
+};
+
+extern int m68k_irq_startup(unsigned int);
+extern void m68k_irq_shutdown(unsigned int);
+
+/*
+ * This function returns a new irq_node_t
+ */
+extern irq_node_t *new_irq_node(void);
+
+extern void m68k_setup_auto_interrupt(void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_user_interrupt(unsigned int vec, unsigned int cnt,
+                                      void (*handler)(unsigned int, struct pt_regs *));
+extern void m68k_setup_irq_controller(struct irq_controller *, unsigned int, unsigned int);
+
+asmlinkage void m68k_handle_int(unsigned int);
+asmlinkage void __m68k_handle_int(unsigned int, struct pt_regs *);
+
+#endif /* _M68K_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_no.h b/arch/m68k/include/asm/irq_no.h
new file mode 100644
index 000000000000..9373c31ac87d
--- /dev/null
+++ b/arch/m68k/include/asm/irq_no.h
@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_IRQ_H_
+#define _M68KNOMMU_IRQ_H_
+
+#ifdef CONFIG_COLDFIRE
+/*
+ * On the ColdFire we keep track of all vectors. That way drivers
+ * can register whatever vector number they wish, and we can deal
+ * with it.
+ */
+#define SYS_IRQS        256
+#define NR_IRQS         SYS_IRQS
+
+#else
+
+/*
+ * # of m68k interrupts
+ */
+#define SYS_IRQS        8
+#define NR_IRQS         (24 + SYS_IRQS)
+
+#endif /* CONFIG_COLDFIRE */
+
+
+#define irq_canonicalize(irq)   (irq)
+
+#endif /* _M68KNOMMU_IRQ_H_ */
diff --git a/arch/m68k/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h
new file mode 100644
index 000000000000..3dd9c0b70270
--- /dev/null
+++ b/arch/m68k/include/asm/irq_regs.h
@@ -0,0 +1 @@
+#include <asm-generic/irq_regs.h>
diff --git a/arch/m68k/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h
new file mode 100644
index 000000000000..6ece1b037665
--- /dev/null
+++ b/arch/m68k/include/asm/kdebug.h
@@ -0,0 +1 @@
+#include <asm-generic/kdebug.h>
diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h
new file mode 100644
index 000000000000..045d9fd122a2
--- /dev/null
+++ b/arch/m68k/include/asm/kmap_types.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "kmap_types_no.h"
+#else
+#include "kmap_types_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/kmap_types_mm.h b/arch/m68k/include/asm/kmap_types_mm.h
new file mode 100644
index 000000000000..c843c63d3801
--- /dev/null
+++ b/arch/m68k/include/asm/kmap_types_mm.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+        KM_BIO_SRC_IRQ,
+        KM_BIO_DST_IRQ,
+        KM_PTE0,
+        KM_PTE1,
+        KM_IRQ0,
+        KM_IRQ1,
+        KM_SOFTIRQ0,
+        KM_SOFTIRQ1,
+        KM_TYPE_NR
+};
+
+#endif  /* __ASM_M68K_KMAP_TYPES_H */
diff --git a/arch/m68k/include/asm/kmap_types_no.h b/arch/m68k/include/asm/kmap_types_no.h
new file mode 100644
index 000000000000..bfb6707575d1
--- /dev/null
+++ b/arch/m68k/include/asm/kmap_types_no.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_M68K_KMAP_TYPES_H
+#define __ASM_M68K_KMAP_TYPES_H
+
+enum km_type {
+        KM_BOUNCE_READ,
+        KM_SKB_SUNRPC_DATA,
+        KM_SKB_DATA_SOFTIRQ,
+        KM_USER0,
+        KM_USER1,
+        KM_BIO_SRC_IRQ,
+        KM_BIO_DST_IRQ,
+        KM_PTE0,
+        KM_PTE1,
+        KM_IRQ0,
+        KM_IRQ1,
+        KM_SOFTIRQ0,
+        KM_SOFTIRQ1,
+        KM_TYPE_NR
+};
+
+#endif
diff --git a/arch/m68k/include/asm/linkage.h b/arch/m68k/include/asm/linkage.h
new file mode 100644
index 000000000000..5a822bb790f7
--- /dev/null
+++ b/arch/m68k/include/asm/linkage.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
diff --git a/arch/m68k/include/asm/local.h b/arch/m68k/include/asm/local.h
new file mode 100644
index 000000000000..6c259263e1f0
--- /dev/null
+++ b/arch/m68k/include/asm/local.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_LOCAL_H
+#define _ASM_M68K_LOCAL_H
+
+#include <asm-generic/local.h>
+
+#endif /* _ASM_M68K_LOCAL_H */
diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h
new file mode 100644
index 000000000000..7e3594dea88b
--- /dev/null
+++ b/arch/m68k/include/asm/m5206sim.h
@@ -0,0 +1,131 @@
+/****************************************************************************/
+
+/*
+ *      m5206sim.h -- ColdFire 5206 System Integration Module support.
+ *
+ *      (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef m5206sim_h
+#define m5206sim_h
+/****************************************************************************/
+
+
+/*
+ *      Define the 5206 SIM register set addresses.
+ */
+#define MCFSIM_SIMR             0x03            /* SIM Config reg (r/w) */
+#define MCFSIM_ICR1             0x14            /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2             0x15            /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3             0x16            /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4             0x17            /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5             0x18            /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6             0x19            /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7             0x1a            /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8             0x1b            /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9             0x1c            /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10            0x1d            /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11            0x1e            /* Intr Ctrl reg 11 (r/w) */
+#define MCFSIM_ICR12            0x1f            /* Intr Ctrl reg 12 (r/w) */
+#define MCFSIM_ICR13            0x20            /* Intr Ctrl reg 13 (r/w) */
+#ifdef CONFIG_M5206e
+#define MCFSIM_ICR14            0x21            /* Intr Ctrl reg 14 (r/w) */
+#define MCFSIM_ICR15            0x22            /* Intr Ctrl reg 15 (r/w) */
+#endif
+
+#define MCFSIM_IMR              0x36            /* Interrupt Mask reg (r/w) */
+#define MCFSIM_IPR              0x3a            /* Interrupt Pend reg (r/w) */
+
+#define MCFSIM_RSR              0x40            /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR            0x41            /* System Protection reg (r/w)*/
+
+#define MCFSIM_SWIVR            0x42            /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR             0x43            /* SW Watchdog service (r/w) */
+
+#define MCFSIM_DCRR             0x46            /* DRAM Refresh reg (r/w) */
+#define MCFSIM_DCTR             0x4a            /* DRAM Timing reg (r/w) */
+#define MCFSIM_DAR0             0x4c            /* DRAM 0 Address reg(r/w) */
+#define MCFSIM_DMR0             0x50            /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DCR0             0x57            /* DRAM 0 Control reg (r/w) */
+#define MCFSIM_DAR1             0x58            /* DRAM 1 Address reg (r/w) */
+#define MCFSIM_DMR1             0x5c            /* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCR1             0x63            /* DRAM 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR0            0x64            /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0            0x68            /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0            0x6e            /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1            0x70            /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1            0x74            /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1            0x7a            /* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2            0x7c            /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2            0x80            /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2            0x86            /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3            0x88            /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3            0x8c            /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3            0x92            /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4            0x94            /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4            0x98            /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4            0x9e            /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5            0xa0            /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5            0xa4            /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5            0xaa            /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6            0xac            /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6            0xb0            /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6            0xb6            /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7            0xb8            /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7            0xbc            /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7            0xc2            /* CS 7 Control reg (r/w) */
+#define MCFSIM_DMCR             0xc6            /* Default control */
+
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR              0xca            /* Pin Assignment reg (r/w) */
+#else
+#define MCFSIM_PAR              0xcb            /* Pin Assignment reg (r/w) */
+#endif
+
+#define MCFSIM_PADDR            0x1c5           /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT            0x1c9           /* Parallel Port Value (r/w) */
+
+/*
+ *      Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#ifdef CONFIG_M5206e
+#define MCFSIM_PAR_DREQ0        0x100           /* Set to select DREQ0 input */
+                                                /* Clear to select T0 input */
+#define MCFSIM_PAR_DREQ1        0x200           /* Select DREQ1 input */
+                                                /* Clear to select T0 output */
+#endif
+
+/*
+ *      Some symbol defines for the Interrupt Control Register
+ */
+#define MCFSIM_SWDICR           MCFSIM_ICR8     /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR        MCFSIM_ICR9     /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR        MCFSIM_ICR10    /* Timer 2 ICR */
+#define MCFSIM_UART1ICR         MCFSIM_ICR12    /* UART 1 ICR */
+#define MCFSIM_UART2ICR         MCFSIM_ICR13    /* UART 2 ICR */
+#ifdef CONFIG_M5206e
+#define MCFSIM_DMA1ICR          MCFSIM_ICR14    /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR          MCFSIM_ICR15    /* DMA 2 ICR */
+#endif
+
+#if defined(CONFIG_M5206e)
+#define MCFSIM_IMR_MASKALL      0xfffe          /* All SIM intr sources */
+#endif
+
+/*
+ *      Macro to get and set IMR register. It is 16 bits on the 5206.
+ */
+#define mcf_getimr()            \
+        *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr)         \
+        *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IMR)) = (imr)
+
+#define mcf_getipr()            \
+        *((volatile unsigned short *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+#endif  /* m5206sim_h */
diff --git a/arch/m68k/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h
new file mode 100644
index 000000000000..49d016e6391a
--- /dev/null
+++ b/arch/m68k/include/asm/m520xsim.h
@@ -0,0 +1,63 @@
+/****************************************************************************/
+
+/*
+ *  m520xsim.h -- ColdFire 5207/5208 System Integration Module support.
+ *
+ *  (C) Copyright 2005, Intec Automation (mike@steroidmicros.com)
+ */
+
+/****************************************************************************/
+#ifndef m520xsim_h
+#define m520xsim_h
+/****************************************************************************/
+
+
+/*
+ *  Define the 5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0        0x48000     /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH        0x00        /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL        0x04        /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH        0x08        /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL        0x0c        /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH     0x10        /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL     0x14        /* Interrupt force 1-31 */
+#define MCFINTC_ICR0        0x40        /* Base ICR register */
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+#define MCFINT_UART2        28          /* Interrupt number for UART2 */
+#define MCFINT_QSPI         31          /* Interrupt number for QSPI */
+#define MCFINT_PIT1         4           /* Interrupt number for PIT1 (PIT0 in processor) */
+
+/*
+ *  SDRAM configuration registers.
+ */
+#define MCFSIM_SDMR         0x000a8000  /* SDRAM Mode/Extended Mode Register */
+#define MCFSIM_SDCR         0x000a8004  /* SDRAM Control Register */
+#define MCFSIM_SDCFG1       0x000a8008  /* SDRAM Configuration Register 1 */
+#define MCFSIM_SDCFG2       0x000a800c  /* SDRAM Configuration Register 2 */
+#define MCFSIM_SDCS0        0x000a8110  /* SDRAM Chip Select 0 Configuration */
+#define MCFSIM_SDCS1        0x000a8114  /* SDRAM Chip Select 1 Configuration */
+
+
+#define MCF_GPIO_PAR_UART                   (0xA4036)
+#define MCF_GPIO_PAR_FECI2C                 (0xA4033)
+#define MCF_GPIO_PAR_FEC                    (0xA4038)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD0         (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_UTXD0         (0x0002)
+
+#define MCF_GPIO_PAR_UART_PAR_URXD1         (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1         (0x0080)
+
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2   (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2   (0x04)
+
+#define ICR_INTRCONF            0x05
+#define MCFPIT_IMR              MCFINTC_IMRL
+#define MCFPIT_IMR_IBIT         (1 << MCFINT_PIT1)
+
+/****************************************************************************/
+#endif  /* m520xsim_h */
diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
new file mode 100644
index 000000000000..bf397313e93f
--- /dev/null
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -0,0 +1,45 @@
+/****************************************************************************/
+
+/*
+ *      m523xsim.h -- ColdFire 523x System Integration Module support.
+ *
+ *      (C) Copyright 2003-2005, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef m523xsim_h
+#define m523xsim_h
+/****************************************************************************/
+
+
+/*
+ *      Define the 523x SIM register set addresses.
+ */
+#define MCFICM_INTC0            0x0c00          /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1            0x0d00          /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH            0x00            /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL            0x04            /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH            0x08            /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL            0x0c            /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH         0x10            /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL         0x14            /* Interrupt force 1-31 */
+#define MCFINTC_IRLR            0x18            /* */
+#define MCFINTC_IACKL           0x19            /* */
+#define MCFINTC_ICR0            0x40            /* Base ICR register */
+
+#define MCFINT_VECBASE          64              /* Vector base number */
+#define MCFINT_UART0            13              /* Interrupt number for UART0 */
+#define MCFINT_PIT1             36              /* Interrupt number for PIT1 */
+#define MCFINT_QSPI             18              /* Interrupt number for QSPI */
+
+/*
+ *      SDRAM configuration registers.
+ */
+#define MCFSIM_DCR              0x44            /* SDRAM control */
+#define MCFSIM_DACR0            0x48            /* SDRAM base address 0 */
+#define MCFSIM_DMR0             0x4c            /* SDRAM address mask 0 */
+#define MCFSIM_DACR1            0x50            /* SDRAM base address 1 */
+#define MCFSIM_DMR1             0x54            /* SDRAM address mask 1 */
+
+/****************************************************************************/
+#endif  /* m523xsim_h */
diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h
new file mode 100644
index 000000000000..366eb8602d2f
--- /dev/null
+++ b/arch/m68k/include/asm/m5249sim.h
@@ -0,0 +1,209 @@
+/****************************************************************************/
+
+/*
+ *      m5249sim.h -- ColdFire 5249 System Integration Module support.
+ *
+ *      (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m5249sim_h
+#define m5249sim_h
+/****************************************************************************/
+
+/*
+ *      Define the 5249 SIM register set addresses.
+ */
+#define MCFSIM_RSR              0x00            /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR            0x01            /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR            0x02            /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR             0x03            /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR              0x04            /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR           0x06            /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_MPARK            0x0C            /* BUS Master Control Reg*/
+#define MCFSIM_IPR              0x40            /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR              0x44            /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR              0x4b            /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0             0x4c            /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1             0x4d            /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2             0x4e            /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3             0x4f            /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4             0x50            /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5             0x51            /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6             0x52            /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7             0x53            /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8             0x54            /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9             0x55            /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10            0x56            /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11            0x57            /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0            0x80            /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0            0x84            /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0            0x8a            /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1            0x8c            /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1            0x90            /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1            0x96            /* CS 1 Control reg (r/w) */
+#define MCFSIM_CSAR2            0x98            /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2            0x9c            /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2            0xa2            /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3            0xa4            /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3            0xa8            /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3            0xae            /* CS 3 Control reg (r/w) */
+
+#define MCFSIM_DCR              0x100           /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0            0x108           /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0             0x10c           /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1            0x110           /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1             0x114           /* DRAM 1 Mask reg (r/w) */
+
+
+/*
+ *      Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR           MCFSIM_ICR0     /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR        MCFSIM_ICR1     /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR        MCFSIM_ICR2     /* Timer 2 ICR */
+#define MCFSIM_UART1ICR         MCFSIM_ICR4     /* UART 1 ICR */
+#define MCFSIM_UART2ICR         MCFSIM_ICR5     /* UART 2 ICR */
+#define MCFSIM_DMA0ICR          MCFSIM_ICR6     /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR          MCFSIM_ICR7     /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR          MCFSIM_ICR8     /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR          MCFSIM_ICR9     /* DMA 3 ICR */
+
+/*
+ *      General purpose IO registers (in MBAR2).
+ */
+#define MCFSIM2_GPIOREAD        0x0             /* GPIO read values */
+#define MCFSIM2_GPIOWRITE       0x4             /* GPIO write values */
+#define MCFSIM2_GPIOENABLE      0x8             /* GPIO enabled */
+#define MCFSIM2_GPIOFUNC        0xc             /* GPIO function */
+#define MCFSIM2_GPIO1READ       0xb0            /* GPIO1 read values */
+#define MCFSIM2_GPIO1WRITE      0xb4            /* GPIO1 write values */
+#define MCFSIM2_GPIO1ENABLE     0xb8            /* GPIO1 enabled */
+#define MCFSIM2_GPIO1FUNC       0xbc            /* GPIO1 function */
+
+#define MCFSIM2_GPIOINTSTAT     0xc0            /* GPIO interrupt status */
+#define MCFSIM2_GPIOINTCLEAR    0xc0            /* GPIO interrupt clear */
+#define MCFSIM2_GPIOINTENABLE   0xc4            /* GPIO interrupt enable */
+
+#define MCFSIM2_INTLEVEL1       0x140           /* Interrupt level reg 1 */
+#define MCFSIM2_INTLEVEL2       0x144           /* Interrupt level reg 2 */
+#define MCFSIM2_INTLEVEL3       0x148           /* Interrupt level reg 3 */
+#define MCFSIM2_INTLEVEL4       0x14c           /* Interrupt level reg 4 */
+#define MCFSIM2_INTLEVEL5       0x150           /* Interrupt level reg 5 */
+#define MCFSIM2_INTLEVEL6       0x154           /* Interrupt level reg 6 */
+#define MCFSIM2_INTLEVEL7       0x158           /* Interrupt level reg 7 */
+#define MCFSIM2_INTLEVEL8       0x15c           /* Interrupt level reg 8 */
+
+#define MCFSIM2_DMAROUTE        0x188           /* DMA routing */
+
+#define MCFSIM2_IDECONFIG1      0x18c           /* IDEconfig1 */
+#define MCFSIM2_IDECONFIG2      0x190           /* IDEconfig2 */
+
+
+/*
+ *      Macro to set IMR register. It is 32 bits on the 5249.
+ */
+#define MCFSIM_IMR_MASKALL      0x7fffe         /* All SIM intr sources */
+
+#define mcf_getimr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr)         \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+/****************************************************************************/
+
+#ifdef __ASSEMBLER__
+
+/*
+ *      The M5249C3 board needs a little help getting all its SIM devices
+ *      initialized at kernel start time. dBUG doesn't set much up, so
+ *      we need to do it manually.
+ */
+.macro m5249c3_setup
+        /*
+         *      Set MBAR1 and MBAR2, just incase they are not set.
+         */
+        movel   #0x10000001,%a0
+        movec   %a0,%MBAR                       /* map MBAR region */
+        subql   #1,%a0                          /* get MBAR address in a0 */
+
+        movel   #0x80000001,%a1
+        movec   %a1,#3086                       /* map MBAR2 region */
+        subql   #1,%a1                          /* get MBAR2 address in a1 */
+
+        /*
+         *      Move secondary interrupts to base at 128.
+         */
+        moveb   #0x80,%d0
+        moveb   %d0,0x16b(%a1)                  /* interrupt base register */
+
+        /*
+         *      Work around broken CSMR0/DRAM vector problem.
+         */
+        movel   #0x001F0021,%d0                 /* disable C/I bit */
+        movel   %d0,0x84(%a0)                   /* set CSMR0 */
+
+        /*
+         *      Disable the PLL firstly. (Who knows what state it is
+         *      in here!).
+         */
+        movel   0x180(%a1),%d0                  /* get current PLL value */
+        andl    #0xfffffffe,%d0                 /* PLL bypass first */
+        movel   %d0,0x180(%a1)                  /* set PLL register */
+        nop
+
+#if CONFIG_CLOCK_FREQ == 140000000
+        /*
+         *      Set initial clock frequency. This assumes M5249C3 board
+         *      is fitted with 11.2896MHz crystal. It will program the
+         *      PLL for 140MHz. Lets go fast :-)
+         */
+        movel   #0x125a40f0,%d0                 /* set for 140MHz */
+        movel   %d0,0x180(%a1)                  /* set PLL register */
+        orl     #0x1,%d0
+        movel   %d0,0x180(%a1)                  /* set PLL register */
+#endif
+
+        /*
+         *      Setup CS1 for ethernet controller.
+         *      (Setup as per M5249C3 doco).
+         */
+        movel  #0xe0000000,%d0                  /* CS1 mapped at 0xe0000000 */
+        movel  %d0,0x8c(%a0)
+        movel  #0x001f0021,%d0                  /* CS1 size of 1Mb */
+        movel  %d0,0x90(%a0)
+        movew  #0x0080,%d0                      /* CS1 = 16bit port, AA */
+        movew  %d0,0x96(%a0)
+
+        /*
+         *      Setup CS2 for IDE interface.
+         */
+        movel   #0x50000000,%d0                 /* CS2 mapped at 0x50000000 */
+        movel   %d0,0x98(%a0)
+        movel   #0x001f0001,%d0                 /* CS2 size of 1MB */
+        movel   %d0,0x9c(%a0)
+        movew   #0x0080,%d0                     /* CS2 = 16bit, TA */
+        movew   %d0,0xa2(%a0)
+
+        movel   #0x00107000,%d0                 /* IDEconfig1 */
+        movel   %d0,0x18c(%a1)
+        movel   #0x000c0400,%d0                 /* IDEconfig2 */
+        movel   %d0,0x190(%a1)
+
+        movel   #0x00080000,%d0                 /* GPIO19, IDE reset bit */
+        orl     %d0,0xc(%a1)                    /* function GPIO19 */
+        orl     %d0,0x8(%a1)                    /* enable GPIO19 as output */
+        orl     %d0,0x4(%a1)                    /* de-assert IDE reset */
+.endm
+
+#define PLATFORM_SETUP  m5249c3_setup
+
+#endif /* __ASSEMBLER__ */
+
+/****************************************************************************/
+#endif  /* m5249sim_h */
diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h
new file mode 100644
index 000000000000..6217edc21139
--- /dev/null
+++ b/arch/m68k/include/asm/m5272sim.h
@@ -0,0 +1,78 @@
+/****************************************************************************/
+
+/*
+ *      m5272sim.h -- ColdFire 5272 System Integration Module support.
+ *
+ *      (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef m5272sim_h
+#define m5272sim_h
+/****************************************************************************/
+
+
+/*
+ *      Define the 5272 SIM register set addresses.
+ */
+#define MCFSIM_SCR              0x04            /* SIM Config reg (r/w) */
+#define MCFSIM_SPR              0x06            /* System Protection reg (r/w)*/
+#define MCFSIM_PMR              0x08            /* Power Management reg (r/w) */
+#define MCFSIM_APMR             0x0e            /* Active Low Power reg (r/w) */
+#define MCFSIM_DIR              0x10            /* Device Identity reg (r/w) */
+
+#define MCFSIM_ICR1             0x20            /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2             0x24            /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3             0x28            /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4             0x2c            /* Intr Ctrl reg 4 (r/w) */
+
+#define MCFSIM_ISR              0x30            /* Interrupt Source reg (r/w) */
+#define MCFSIM_PITR             0x34            /* Interrupt Transition (r/w) */
+#define MCFSIM_PIWR             0x38            /* Interrupt Wakeup reg (r/w) */
+#define MCFSIM_PIVR             0x3f            /* Interrupt Vector reg (r/w( */
+
+#define MCFSIM_WRRR             0x280           /* Watchdog reference (r/w) */
+#define MCFSIM_WIRR             0x284           /* Watchdog interrupt (r/w) */
+#define MCFSIM_WCR              0x288           /* Watchdog counter (r/w) */
+#define MCFSIM_WER              0x28c           /* Watchdog event (r/w) */
+
+#define MCFSIM_CSBR0            0x40            /* CS0 Base Address (r/w) */
+#define MCFSIM_CSOR0            0x44            /* CS0 Option (r/w) */
+#define MCFSIM_CSBR1            0x48            /* CS1 Base Address (r/w) */
+#define MCFSIM_CSOR1            0x4c            /* CS1 Option (r/w) */
+#define MCFSIM_CSBR2            0x50            /* CS2 Base Address (r/w) */
+#define MCFSIM_CSOR2            0x54            /* CS2 Option (r/w) */
+#define MCFSIM_CSBR3            0x58            /* CS3 Base Address (r/w) */
+#define MCFSIM_CSOR3            0x5c            /* CS3 Option (r/w) */
+#define MCFSIM_CSBR4            0x60            /* CS4 Base Address (r/w) */
+#define MCFSIM_CSOR4            0x64            /* CS4 Option (r/w) */
+#define MCFSIM_CSBR5            0x68            /* CS5 Base Address (r/w) */
+#define MCFSIM_CSOR5            0x6c            /* CS5 Option (r/w) */
+#define MCFSIM_CSBR6            0x70            /* CS6 Base Address (r/w) */
+#define MCFSIM_CSOR6            0x74            /* CS6 Option (r/w) */
+#define MCFSIM_CSBR7            0x78            /* CS7 Base Address (r/w) */
+#define MCFSIM_CSOR7            0x7c            /* CS7 Option (r/w) */
+
+#define MCFSIM_SDCR             0x180           /* SDRAM Configuration (r/w) */
+#define MCFSIM_SDTR             0x184           /* SDRAM Timing (r/w) */
+#define MCFSIM_DCAR0            0x4c            /* DRAM 0 Address reg(r/w) */
+#define MCFSIM_DCMR0            0x50            /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DCCR0            0x57            /* DRAM 0 Control reg (r/w) */
+#define MCFSIM_DCAR1            0x58            /* DRAM 1 Address reg (r/w) */
+#define MCFSIM_DCMR1            0x5c            /* DRAM 1 Mask reg (r/w) */
+#define MCFSIM_DCCR1            0x63            /* DRAM 1 Control reg (r/w) */
+
+#define MCFSIM_PACNT            0x80            /* Port A Control (r/w) */
+#define MCFSIM_PADDR            0x84            /* Port A Direction (r/w) */
+#define MCFSIM_PADAT            0x86            /* Port A Data (r/w) */
+#define MCFSIM_PBCNT            0x88            /* Port B Control (r/w) */
+#define MCFSIM_PBDDR            0x8c            /* Port B Direction (r/w) */
+#define MCFSIM_PBDAT            0x8e            /* Port B Data (r/w) */
+#define MCFSIM_PCDDR            0x94            /* Port C Direction (r/w) */
+#define MCFSIM_PCDAT            0x96            /* Port C Data (r/w) */
+#define MCFSIM_PDCNT            0x98            /* Port D Control (r/w) */
+
+
+/****************************************************************************/
+#endif  /* m5272sim_h */
diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h
new file mode 100644
index 000000000000..1f63ab3fb3e6
--- /dev/null
+++ b/arch/m68k/include/asm/m527xsim.h
@@ -0,0 +1,74 @@
+/****************************************************************************/
+
+/*
+ *      m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ *      (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m527xsim_h
+#define m527xsim_h
+/****************************************************************************/
+
+
+/*
+ *      Define the 5270/5271 SIM register set addresses.
+ */
+#define MCFICM_INTC0            0x0c00          /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1            0x0d00          /* Base for Interrupt Ctrl 1 */
+#define MCFINTC_IPRH            0x00            /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL            0x04            /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH            0x08            /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL            0x0c            /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH         0x10            /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL         0x14            /* Interrupt force 1-31 */
+#define MCFINTC_IRLR            0x18            /* */
+#define MCFINTC_IACKL           0x19            /* */
+#define MCFINTC_ICR0            0x40            /* Base ICR register */
+
+#define MCFINT_VECBASE          64              /* Vector base number */
+#define MCFINT_UART0            13              /* Interrupt number for UART0 */
+#define MCFINT_UART1            14              /* Interrupt number for UART1 */
+#define MCFINT_UART2            15              /* Interrupt number for UART2 */
+#define MCFINT_PIT1             36              /* Interrupt number for PIT1 */
+
+/*
+ *      SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271
+#define MCFSIM_DCR              0x40            /* SDRAM control */
+#define MCFSIM_DACR0            0x48            /* SDRAM base address 0 */
+#define MCFSIM_DMR0             0x4c            /* SDRAM address mask 0 */
+#define MCFSIM_DACR1            0x50            /* SDRAM base address 1 */
+#define MCFSIM_DMR1             0x54            /* SDRAM address mask 1 */
+#endif
+#ifdef CONFIG_M5275
+#define MCFSIM_DMR              0x40            /* SDRAM mode */
+#define MCFSIM_DCR              0x44            /* SDRAM control */
+#define MCFSIM_DCFG1            0x48            /* SDRAM configuration 1 */
+#define MCFSIM_DCFG2            0x4c            /* SDRAM configuration 2 */
+#define MCFSIM_DBAR0            0x50            /* SDRAM base address 0 */
+#define MCFSIM_DMR0             0x54            /* SDRAM address mask 0 */
+#define MCFSIM_DBAR1            0x58            /* SDRAM base address 1 */
+#define MCFSIM_DMR1             0x5c            /* SDRAM address mask 1 */
+#endif
+
+/*
+ *      GPIO pins setups to enable the UARTs.
+ */
+#ifdef CONFIG_M5271
+#define MCF_GPIO_PAR_UART       0x100048        /* PAR UART address */
+#define UART0_ENABLE_MASK       0x000f
+#define UART1_ENABLE_MASK       0x0ff0
+#define UART2_ENABLE_MASK       0x3000
+#endif
+#ifdef CONFIG_M5275
+#define MCF_GPIO_PAR_UART       0x10007c        /* PAR UART address */
+#define UART0_ENABLE_MASK       0x000f
+#define UART1_ENABLE_MASK       0x00f0
+#define UART2_ENABLE_MASK       0x3f00 
+#endif
+
+/****************************************************************************/
+#endif  /* m527xsim_h */
diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h
new file mode 100644
index 000000000000..28bf783a5d6d
--- /dev/null
+++ b/arch/m68k/include/asm/m528xsim.h
@@ -0,0 +1,159 @@
+/****************************************************************************/
+
+/*
+ *      m528xsim.h -- ColdFire 5280/5282 System Integration Module support.
+ *
+ *      (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m528xsim_h
+#define m528xsim_h
+/****************************************************************************/
+
+
+/*
+ *      Define the 5280/5282 SIM register set addresses.
+ */
+#define MCFICM_INTC0            0x0c00          /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1            0x0d00          /* Base for Interrupt Ctrl 0 */
+#define MCFINTC_IPRH            0x00            /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL            0x04            /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH            0x08            /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL            0x0c            /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH         0x10            /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL         0x14            /* Interrupt force 1-31 */
+#define MCFINTC_IRLR            0x18            /* */
+#define MCFINTC_IACKL           0x19            /* */
+#define MCFINTC_ICR0            0x40            /* Base ICR register */
+
+#define MCFINT_VECBASE          64              /* Vector base number */
+#define MCFINT_UART0            13              /* Interrupt number for UART0 */
+#define MCFINT_PIT1             55              /* Interrupt number for PIT1 */
+
+/*
+ *      SDRAM configuration registers.
+ */
+#define MCFSIM_DCR              0x44            /* SDRAM control */
+#define MCFSIM_DACR0            0x48            /* SDRAM base address 0 */
+#define MCFSIM_DMR0             0x4c            /* SDRAM address mask 0 */
+#define MCFSIM_DACR1            0x50            /* SDRAM base address 1 */
+#define MCFSIM_DMR1             0x54            /* SDRAM address mask 1 */
+
+/*
+ *      Derek Cheung - 6 Feb 2005
+ *              add I2C and QSPI register definition using Freescale's MCF5282
+ */
+/* set Port AS pin for I2C or UART */
+#define MCF5282_GPIO_PASPAR     (volatile u16 *) (MCF_IPSBAR + 0x00100056)
+
+/* Port UA Pin Assignment Register (8 Bit) */
+#define MCF5282_GPIO_PUAPAR     0x10005C
+
+/* Interrupt Mask Register Register Low */ 
+#define MCF5282_INTC0_IMRL      (volatile u32 *) (MCF_IPSBAR + 0x0C0C)
+/* Interrupt Control Register 7 */
+#define MCF5282_INTC0_ICR17     (volatile u8 *) (MCF_IPSBAR + 0x0C51)
+
+
+
+/*********************************************************************
+*
+* Inter-IC (I2C) Module
+*
+*********************************************************************/
+/* Read/Write access macros for general use */
+#define MCF5282_I2C_I2ADR       (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address 
+#define MCF5282_I2C_I2FDR       (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider
+#define MCF5282_I2C_I2CR        (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control
+#define MCF5282_I2C_I2SR        (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status
+#define MCF5282_I2C_I2DR        (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF5282_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
+
+#define MCF5282_I2C_I2FDR_IC(x)                         (((x)&0x3F))
+
+#define MCF5282_I2C_I2CR_IEN    (0x80)  // I2C enable
+#define MCF5282_I2C_I2CR_IIEN   (0x40)  // interrupt enable
+#define MCF5282_I2C_I2CR_MSTA   (0x20)  // master/slave mode
+#define MCF5282_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
+#define MCF5282_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
+#define MCF5282_I2C_I2CR_RSTA   (0x04)  // repeat start
+
+#define MCF5282_I2C_I2SR_ICF    (0x80)  // data transfer bit
+#define MCF5282_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
+#define MCF5282_I2C_I2SR_IBB    (0x20)  // I2C bus busy
+#define MCF5282_I2C_I2SR_IAL    (0x10)  // aribitration lost
+#define MCF5282_I2C_I2SR_SRW    (0x04)  // slave read/write
+#define MCF5282_I2C_I2SR_IIF    (0x02)  // I2C interrupt
+#define MCF5282_I2C_I2SR_RXAK   (0x01)  // received acknowledge
+
+
+
+/*********************************************************************
+*
+* Queued Serial Peripheral Interface (QSPI) Module
+*
+*********************************************************************/
+/* Derek - 21 Feb 2005 */
+/* change to the format used in I2C */
+/* Read/Write access macros for general use */
+#define MCF5282_QSPI_QMR        MCF_IPSBAR + 0x0340
+#define MCF5282_QSPI_QDLYR      MCF_IPSBAR + 0x0344
+#define MCF5282_QSPI_QWR        MCF_IPSBAR + 0x0348
+#define MCF5282_QSPI_QIR        MCF_IPSBAR + 0x034C
+#define MCF5282_QSPI_QAR        MCF_IPSBAR + 0x0350
+#define MCF5282_QSPI_QDR        MCF_IPSBAR + 0x0354
+#define MCF5282_QSPI_QCR        MCF_IPSBAR + 0x0354
+
+/* Bit level definitions and macros */
+#define MCF5282_QSPI_QMR_MSTR                           (0x8000)
+#define MCF5282_QSPI_QMR_DOHIE                          (0x4000)
+#define MCF5282_QSPI_QMR_BITS_16                        (0x0000)
+#define MCF5282_QSPI_QMR_BITS_8                         (0x2000)
+#define MCF5282_QSPI_QMR_BITS_9                         (0x2400)
+#define MCF5282_QSPI_QMR_BITS_10                        (0x2800)
+#define MCF5282_QSPI_QMR_BITS_11                        (0x2C00)
+#define MCF5282_QSPI_QMR_BITS_12                        (0x3000)
+#define MCF5282_QSPI_QMR_BITS_13                        (0x3400)
+#define MCF5282_QSPI_QMR_BITS_14                        (0x3800)
+#define MCF5282_QSPI_QMR_BITS_15                        (0x3C00)
+#define MCF5282_QSPI_QMR_CPOL                           (0x0200)
+#define MCF5282_QSPI_QMR_CPHA                           (0x0100)
+#define MCF5282_QSPI_QMR_BAUD(x)                        (((x)&0x00FF))
+
+#define MCF5282_QSPI_QDLYR_SPE                          (0x80)
+#define MCF5282_QSPI_QDLYR_QCD(x)                       (((x)&0x007F)<<8)
+#define MCF5282_QSPI_QDLYR_DTL(x)                       (((x)&0x00FF))
+
+#define MCF5282_QSPI_QWR_HALT                           (0x8000)
+#define MCF5282_QSPI_QWR_WREN                           (0x4000)
+#define MCF5282_QSPI_QWR_WRTO                           (0x2000)
+#define MCF5282_QSPI_QWR_CSIV                           (0x1000)
+#define MCF5282_QSPI_QWR_ENDQP(x)                       (((x)&0x000F)<<8)
+#define MCF5282_QSPI_QWR_CPTQP(x)                       (((x)&0x000F)<<4)
+#define MCF5282_QSPI_QWR_NEWQP(x)                       (((x)&0x000F))
+
+#define MCF5282_QSPI_QIR_WCEFB                          (0x8000)
+#define MCF5282_QSPI_QIR_ABRTB                          (0x4000)
+#define MCF5282_QSPI_QIR_ABRTL                          (0x1000)
+#define MCF5282_QSPI_QIR_WCEFE                          (0x0800)
+#define MCF5282_QSPI_QIR_ABRTE                          (0x0400)
+#define MCF5282_QSPI_QIR_SPIFE                          (0x0100)
+#define MCF5282_QSPI_QIR_WCEF                           (0x0008)
+#define MCF5282_QSPI_QIR_ABRT                           (0x0004)
+#define MCF5282_QSPI_QIR_SPIF                           (0x0001)
+
+#define MCF5282_QSPI_QAR_ADDR(x)                        (((x)&0x003F))
+
+#define MCF5282_QSPI_QDR_COMMAND(x)                     (((x)&0xFF00))
+#define MCF5282_QSPI_QCR_DATA(x)                        (((x)&0x00FF)<<8)
+#define MCF5282_QSPI_QCR_CONT                           (0x8000)
+#define MCF5282_QSPI_QCR_BITSE                          (0x4000)
+#define MCF5282_QSPI_QCR_DT                             (0x2000)
+#define MCF5282_QSPI_QCR_DSCK                           (0x1000)
+#define MCF5282_QSPI_QCR_CS                             (((x)&0x000F)<<8)
+
+/****************************************************************************/
+#endif  /* m528xsim_h */
diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h
new file mode 100644
index 000000000000..5886728409c0
--- /dev/null
+++ b/arch/m68k/include/asm/m5307sim.h
@@ -0,0 +1,181 @@
+/****************************************************************************/
+
+/*
+ *      m5307sim.h -- ColdFire 5307 System Integration Module support.
+ *
+ *      (C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *      (C) Copyright 1999,  Lineo (www.lineo.com)
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef m5307sim_h
+#define m5307sim_h
+/****************************************************************************/
+
+/*
+ *      Define the 5307 SIM register set addresses.
+ */
+#define MCFSIM_RSR              0x00            /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR            0x01            /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR            0x02            /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR             0x03            /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR              0x04            /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR           0x06            /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_PLLCR            0x08            /* PLL Controll Reg*/
+#define MCFSIM_MPARK            0x0C            /* BUS Master Control Reg*/
+#define MCFSIM_IPR              0x40            /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR              0x44            /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR              0x4b            /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0             0x4c            /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1             0x4d            /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2             0x4e            /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3             0x4f            /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4             0x50            /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5             0x51            /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6             0x52            /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7             0x53            /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8             0x54            /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9             0x55            /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10            0x56            /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11            0x57            /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0            0x80            /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0            0x84            /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0            0x8a            /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1            0x8c            /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1            0x90            /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1            0x96            /* CS 1 Control reg (r/w) */
+
+#ifdef CONFIG_OLDMASK
+#define MCFSIM_CSBAR            0x98            /* CS Base Address reg (r/w) */
+#define MCFSIM_CSBAMR           0x9c            /* CS Base Mask reg (r/w) */
+#define MCFSIM_CSMR2            0x9e            /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2            0xa2            /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSMR3            0xaa            /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3            0xae            /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSMR4            0xb6            /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4            0xba            /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSMR5            0xc2            /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5            0xc6            /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSMR6            0xce            /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6            0xd2            /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSMR7            0xda            /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7            0xde            /* CS 7 Control reg (r/w) */
+#else
+#define MCFSIM_CSAR2            0x98            /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2            0x9c            /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2            0xa2            /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3            0xa4            /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3            0xa8            /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3            0xae            /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4            0xb0            /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4            0xb4            /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4            0xba            /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5            0xbc            /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5            0xc0            /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5            0xc6            /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6            0xc8            /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6            0xcc            /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6            0xd2            /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7            0xd4            /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7            0xd8            /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7            0xde            /* CS 7 Control reg (r/w) */
+#endif /* CONFIG_OLDMASK */
+
+#define MCFSIM_DCR              0x100           /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0            0x108           /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0             0x10c           /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1            0x110           /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1             0x114           /* DRAM 1 Mask reg (r/w) */
+
+#define MCFSIM_PADDR            0x244           /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT            0x248           /* Parallel Data (r/w) */
+
+
+/* Definition offset address for CS2-7  -- old mask 5307 */
+
+#define MCF5307_CS2             (0x400000)
+#define MCF5307_CS3             (0x600000)
+#define MCF5307_CS4             (0x800000)
+#define MCF5307_CS5             (0xA00000)
+#define MCF5307_CS6             (0xC00000)
+#define MCF5307_CS7             (0xE00000)
+
+
+/*
+ *      Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR           MCFSIM_ICR0     /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR        MCFSIM_ICR1     /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR        MCFSIM_ICR2     /* Timer 2 ICR */
+#define MCFSIM_UART1ICR         MCFSIM_ICR4     /* UART 1 ICR */
+#define MCFSIM_UART2ICR         MCFSIM_ICR5     /* UART 2 ICR */
+#define MCFSIM_DMA0ICR          MCFSIM_ICR6     /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR          MCFSIM_ICR7     /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR          MCFSIM_ICR8     /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR          MCFSIM_ICR9     /* DMA 3 ICR */
+
+#if defined(CONFIG_M5307)
+#define MCFSIM_IMR_MASKALL      0x3fffe         /* All SIM intr sources */
+#endif
+
+/*
+ *      Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define mcf_getimr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr)         \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *      Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4     0x80
+#define IRQ3_LEVEL6     0x40
+#define IRQ1_LEVEL2     0x20
+
+
+/*
+ *      Define the Cache register flags.
+ */
+#define CACR_EC                 (1<<31)
+#define CACR_ESB                (1<<29)
+#define CACR_DPI                (1<<28)
+#define CACR_HLCK               (1<<27)
+#define CACR_CINVA              (1<<24)
+#define CACR_DNFB               (1<<10)
+#define CACR_DCM_WTHRU          (0<<8)
+#define CACR_DCM_WBACK          (1<<8)
+#define CACR_DCM_OFF_PRE        (2<<8)
+#define CACR_DCM_OFF_IMP        (3<<8)
+#define CACR_DW                 (1<<5)
+
+#define ACR_BASE_POS            24
+#define ACR_MASK_POS            16
+#define ACR_ENABLE              (1<<15)
+#define ACR_USER                (0<<13)
+#define ACR_SUPER               (1<<13)
+#define ACR_ANY                 (2<<13)
+#define ACR_CM_WTHRU            (0<<5)
+#define ACR_CM_WBACK            (1<<5)
+#define ACR_CM_OFF_PRE          (2<<5)
+#define ACR_CM_OFF_IMP          (3<<5)
+#define ACR_WPROTECT            (1<<2)
+
+/****************************************************************************/
+#endif  /* m5307sim_h */
diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h
new file mode 100644
index 000000000000..1835fd20a82c
--- /dev/null
+++ b/arch/m68k/include/asm/m532xsim.h
@@ -0,0 +1,2238 @@
+/****************************************************************************/
+
+/*
+ *      m532xsim.h -- ColdFire 5329 registers
+ */
+
+/****************************************************************************/
+#ifndef m532xsim_h
+#define m532xsim_h
+/****************************************************************************/
+
+#define MCF_REG32(x) (*(volatile unsigned long  *)(x))
+#define MCF_REG16(x) (*(volatile unsigned short *)(x))
+#define MCF_REG08(x) (*(volatile unsigned char  *)(x))
+
+#define MCFINT_VECBASE      64
+#define MCFINT_UART0        26          /* Interrupt number for UART0 */
+#define MCFINT_UART1        27          /* Interrupt number for UART1 */
+
+#define MCF_WTM_WCR     MCF_REG16(0xFC098000)
+
+/*
+ *      Define the 532x SIM register set addresses.
+ */
+#define MCFSIM_IPRL             0xFC048004
+#define MCFSIM_IPRH             0xFC048000
+#define MCFSIM_IPR              MCFSIM_IPRL
+#define MCFSIM_IMRL             0xFC04800C
+#define MCFSIM_IMRH             0xFC048008
+#define MCFSIM_IMR              MCFSIM_IMRL
+#define MCFSIM_ICR0             0xFC048040      
+#define MCFSIM_ICR1             0xFC048041      
+#define MCFSIM_ICR2             0xFC048042      
+#define MCFSIM_ICR3             0xFC048043      
+#define MCFSIM_ICR4             0xFC048044      
+#define MCFSIM_ICR5             0xFC048045      
+#define MCFSIM_ICR6             0xFC048046      
+#define MCFSIM_ICR7             0xFC048047      
+#define MCFSIM_ICR8             0xFC048048      
+#define MCFSIM_ICR9             0xFC048049      
+#define MCFSIM_ICR10            0xFC04804A
+#define MCFSIM_ICR11            0xFC04804B
+
+/*
+ *      Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR           MCFSIM_ICR0     /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR        MCFSIM_ICR1     /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR        MCFSIM_ICR2     /* Timer 2 ICR */
+#define MCFSIM_UART1ICR         MCFSIM_ICR4     /* UART 1 ICR */
+#define MCFSIM_UART2ICR         MCFSIM_ICR5     /* UART 2 ICR */
+#define MCFSIM_DMA0ICR          MCFSIM_ICR6     /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR          MCFSIM_ICR7     /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR          MCFSIM_ICR8     /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR          MCFSIM_ICR9     /* DMA 3 ICR */
+
+
+#define MCFSIM_IMR_MASKALL      0xFFFFFFFF      /* All SIM intr sources */
+
+#define MCFSIM_IMR_SIMR0        0xFC04801C
+#define MCFSIM_IMR_SIMR1        0xFC04C01C
+#define MCFSIM_IMR_CIMR0        0xFC04801D
+#define MCFSIM_IMR_CIMR1        0xFC04C01D
+
+#define MCFSIM_ICR_TIMER1       (0xFC048040+32)
+#define MCFSIM_ICR_TIMER2       (0xFC048040+33)
+
+
+/*
+ *      Macro to set IMR register. It is 32 bits on the 5307.
+ */
+#define mcf_getimr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr)         \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+#define mcf_getiprl()           \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRL))
+
+#define mcf_getiprh()           \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPRH))
+
+
+#define mcf_enable_irq0(irq)            \
+        *((volatile unsigned char*) (MCFSIM_IMR_CIMR0)) = (irq);
+
+#define mcf_enable_irq1(irq)            \
+        *((volatile unsigned char*) (MCFSIM_IMR_CIMR1)) = (irq);
+
+#define mcf_disable_irq0(irq)           \
+        *((volatile unsigned char*) (MCFSIM_IMR_SIMR0)) = (irq);
+
+#define mcf_disable_irq1(irq)           \
+        *((volatile unsigned char*) (MCFSIM_IMR_SIMR1)) = (irq);
+
+/*
+ *      Define the Cache register flags.
+ */
+#define CACR_EC                 (1<<31)
+#define CACR_ESB                (1<<29)
+#define CACR_DPI                (1<<28)
+#define CACR_HLCK               (1<<27)
+#define CACR_CINVA              (1<<24)
+#define CACR_DNFB               (1<<10)
+#define CACR_DCM_WTHRU          (0<<8)
+#define CACR_DCM_WBACK          (1<<8)
+#define CACR_DCM_OFF_PRE        (2<<8)
+#define CACR_DCM_OFF_IMP        (3<<8)
+#define CACR_DW                 (1<<5)
+
+#define ACR_BASE_POS            24
+#define ACR_MASK_POS            16
+#define ACR_ENABLE              (1<<15)
+#define ACR_USER                (0<<13)
+#define ACR_SUPER               (1<<13)
+#define ACR_ANY                 (2<<13)
+#define ACR_CM_WTHRU            (0<<5)
+#define ACR_CM_WBACK            (1<<5)
+#define ACR_CM_OFF_PRE          (2<<5)
+#define ACR_CM_OFF_IMP          (3<<5)
+#define ACR_WPROTECT            (1<<2)
+
+/*********************************************************************
+ *
+ * Inter-IC (I2C) Module
+ *
+ *********************************************************************/
+
+/* Read/Write access macros for general use */
+#define MCF532x_I2C_I2ADR       (volatile u8 *) (0xFC058000) // Address 
+#define MCF532x_I2C_I2FDR       (volatile u8 *) (0xFC058004) // Freq Divider
+#define MCF532x_I2C_I2CR        (volatile u8 *) (0xFC058008) // Control
+#define MCF532x_I2C_I2SR        (volatile u8 *) (0xFC05800C) // Status
+#define MCF532x_I2C_I2DR        (volatile u8 *) (0xFC058010) // Data I/O
+
+/* Bit level definitions and macros */
+#define MCF532x_I2C_I2ADR_ADDR(x)                       (((x)&0x7F)<<0x01)
+
+#define MCF532x_I2C_I2FDR_IC(x)                         (((x)&0x3F))
+
+#define MCF532x_I2C_I2CR_IEN    (0x80)  // I2C enable
+#define MCF532x_I2C_I2CR_IIEN   (0x40)  // interrupt enable
+#define MCF532x_I2C_I2CR_MSTA   (0x20)  // master/slave mode
+#define MCF532x_I2C_I2CR_MTX    (0x10)  // transmit/receive mode
+#define MCF532x_I2C_I2CR_TXAK   (0x08)  // transmit acknowledge enable
+#define MCF532x_I2C_I2CR_RSTA   (0x04)  // repeat start
+
+#define MCF532x_I2C_I2SR_ICF    (0x80)  // data transfer bit
+#define MCF532x_I2C_I2SR_IAAS   (0x40)  // I2C addressed as a slave
+#define MCF532x_I2C_I2SR_IBB    (0x20)  // I2C bus busy
+#define MCF532x_I2C_I2SR_IAL    (0x10)  // aribitration lost
+#define MCF532x_I2C_I2SR_SRW    (0x04)  // slave read/write
+#define MCF532x_I2C_I2SR_IIF    (0x02)  // I2C interrupt
+#define MCF532x_I2C_I2SR_RXAK   (0x01)  // received acknowledge
+
+#define MCF532x_PAR_FECI2C      (volatile u8 *) (0xFC0A4053)
+
+
+/*
+ *      The M5329EVB board needs a help getting its devices initialized 
+ *      at kernel start time if dBUG doesn't set it up (for example 
+ *      it is not used), so we need to do it manually.
+ */
+#ifdef __ASSEMBLER__
+.macro m5329EVB_setup
+        movel   #0xFC098000, %a7
+        movel   #0x0, (%a7)
+#define CORE_SRAM       0x80000000      
+#define CORE_SRAM_SIZE  0x8000
+        movel   #CORE_SRAM, %d0
+        addl    #0x221, %d0
+        movec   %d0,%RAMBAR1
+        movel   #CORE_SRAM, %sp
+        addl    #CORE_SRAM_SIZE, %sp
+        jsr     sysinit
+.endm
+#define PLATFORM_SETUP  m5329EVB_setup
+
+#endif /* __ASSEMBLER__ */
+
+/*********************************************************************
+ *
+ * Chip Configuration Module (CCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_CCM_CCR               MCF_REG16(0xFC0A0004)
+#define MCF_CCM_RCON              MCF_REG16(0xFC0A0008)
+#define MCF_CCM_CIR               MCF_REG16(0xFC0A000A)
+#define MCF_CCM_MISCCR            MCF_REG16(0xFC0A0010)
+#define MCF_CCM_CDR               MCF_REG16(0xFC0A0012)
+#define MCF_CCM_UHCSR             MCF_REG16(0xFC0A0014)
+#define MCF_CCM_UOCSR             MCF_REG16(0xFC0A0016)
+
+/* Bit definitions and macros for MCF_CCM_CCR */
+#define MCF_CCM_CCR_RESERVED      (0x0001)
+#define MCF_CCM_CCR_PLL_MODE      (0x0003)
+#define MCF_CCM_CCR_OSC_MODE      (0x0005)
+#define MCF_CCM_CCR_BOOTPS(x)     (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_CCR_LOAD          (0x0021)
+#define MCF_CCM_CCR_LIMP          (0x0041)
+#define MCF_CCM_CCR_CSC(x)        (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_RCON */
+#define MCF_CCM_RCON_RESERVED     (0x0001)
+#define MCF_CCM_RCON_PLL_MODE     (0x0003)
+#define MCF_CCM_RCON_OSC_MODE     (0x0005)
+#define MCF_CCM_RCON_BOOTPS(x)    (((x)&0x0003)<<3|0x0001)
+#define MCF_CCM_RCON_LOAD         (0x0021)
+#define MCF_CCM_RCON_LIMP         (0x0041)
+#define MCF_CCM_RCON_CSC(x)       (((x)&0x0003)<<8|0x0001)
+
+/* Bit definitions and macros for MCF_CCM_CIR */
+#define MCF_CCM_CIR_PRN(x)        (((x)&0x003F)<<0)
+#define MCF_CCM_CIR_PIN(x)        (((x)&0x03FF)<<6)
+
+/* Bit definitions and macros for MCF_CCM_MISCCR */
+#define MCF_CCM_MISCCR_USBSRC     (0x0001)
+#define MCF_CCM_MISCCR_USBDIV     (0x0002)
+#define MCF_CCM_MISCCR_SSI_SRC    (0x0010)
+#define MCF_CCM_MISCCR_TIM_DMA   (0x0020)
+#define MCF_CCM_MISCCR_SSI_PUS    (0x0040)
+#define MCF_CCM_MISCCR_SSI_PUE    (0x0080)
+#define MCF_CCM_MISCCR_LCD_CHEN   (0x0100)
+#define MCF_CCM_MISCCR_LIMP       (0x1000)
+#define MCF_CCM_MISCCR_PLL_LOCK   (0x2000)
+
+/* Bit definitions and macros for MCF_CCM_CDR */
+#define MCF_CCM_CDR_SSIDIV(x)     (((x)&0x000F)<<0)
+#define MCF_CCM_CDR_LPDIV(x)      (((x)&0x000F)<<8)
+
+/* Bit definitions and macros for MCF_CCM_UHCSR */
+#define MCF_CCM_UHCSR_XPDE        (0x0001)
+#define MCF_CCM_UHCSR_UHMIE       (0x0002)
+#define MCF_CCM_UHCSR_WKUP        (0x0004)
+#define MCF_CCM_UHCSR_PORTIND(x)  (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_CCM_UOCSR */
+#define MCF_CCM_UOCSR_XPDE        (0x0001)
+#define MCF_CCM_UOCSR_UOMIE       (0x0002)
+#define MCF_CCM_UOCSR_WKUP        (0x0004)
+#define MCF_CCM_UOCSR_PWRFLT      (0x0008)
+#define MCF_CCM_UOCSR_SEND        (0x0010)
+#define MCF_CCM_UOCSR_VVLD        (0x0020)
+#define MCF_CCM_UOCSR_BVLD        (0x0040)
+#define MCF_CCM_UOCSR_AVLD        (0x0080)
+#define MCF_CCM_UOCSR_DPPU        (0x0100)
+#define MCF_CCM_UOCSR_DCR_VBUS    (0x0200)
+#define MCF_CCM_UOCSR_CRG_VBUS    (0x0400)
+#define MCF_CCM_UOCSR_DRV_VBUS    (0x0800)
+#define MCF_CCM_UOCSR_DMPD        (0x1000)
+#define MCF_CCM_UOCSR_DPPD        (0x2000)
+#define MCF_CCM_UOCSR_PORTIND(x)  (((x)&0x0003)<<14)
+
+/*********************************************************************
+ *
+ * DMA Timers (DTIM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_DTIM0_DTMR           MCF_REG16(0xFC070000)
+#define MCF_DTIM0_DTXMR          MCF_REG08(0xFC070002)
+#define MCF_DTIM0_DTER           MCF_REG08(0xFC070003)
+#define MCF_DTIM0_DTRR           MCF_REG32(0xFC070004)
+#define MCF_DTIM0_DTCR           MCF_REG32(0xFC070008)
+#define MCF_DTIM0_DTCN           MCF_REG32(0xFC07000C)
+#define MCF_DTIM1_DTMR           MCF_REG16(0xFC074000)
+#define MCF_DTIM1_DTXMR          MCF_REG08(0xFC074002)
+#define MCF_DTIM1_DTER           MCF_REG08(0xFC074003)
+#define MCF_DTIM1_DTRR           MCF_REG32(0xFC074004)
+#define MCF_DTIM1_DTCR           MCF_REG32(0xFC074008)
+#define MCF_DTIM1_DTCN           MCF_REG32(0xFC07400C)
+#define MCF_DTIM2_DTMR           MCF_REG16(0xFC078000)
+#define MCF_DTIM2_DTXMR          MCF_REG08(0xFC078002)
+#define MCF_DTIM2_DTER           MCF_REG08(0xFC078003)
+#define MCF_DTIM2_DTRR           MCF_REG32(0xFC078004)
+#define MCF_DTIM2_DTCR           MCF_REG32(0xFC078008)
+#define MCF_DTIM2_DTCN           MCF_REG32(0xFC07800C)
+#define MCF_DTIM3_DTMR           MCF_REG16(0xFC07C000)
+#define MCF_DTIM3_DTXMR          MCF_REG08(0xFC07C002)
+#define MCF_DTIM3_DTER           MCF_REG08(0xFC07C003)
+#define MCF_DTIM3_DTRR           MCF_REG32(0xFC07C004)
+#define MCF_DTIM3_DTCR           MCF_REG32(0xFC07C008)
+#define MCF_DTIM3_DTCN           MCF_REG32(0xFC07C00C)
+#define MCF_DTIM_DTMR(x)         MCF_REG16(0xFC070000+((x)*0x4000))
+#define MCF_DTIM_DTXMR(x)        MCF_REG08(0xFC070002+((x)*0x4000))
+#define MCF_DTIM_DTER(x)         MCF_REG08(0xFC070003+((x)*0x4000))
+#define MCF_DTIM_DTRR(x)         MCF_REG32(0xFC070004+((x)*0x4000))
+#define MCF_DTIM_DTCR(x)         MCF_REG32(0xFC070008+((x)*0x4000))
+#define MCF_DTIM_DTCN(x)         MCF_REG32(0xFC07000C+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_DTIM_DTMR */
+#define MCF_DTIM_DTMR_RST        (0x0001)
+#define MCF_DTIM_DTMR_CLK(x)     (((x)&0x0003)<<1)
+#define MCF_DTIM_DTMR_FRR        (0x0008)
+#define MCF_DTIM_DTMR_ORRI       (0x0010)
+#define MCF_DTIM_DTMR_OM         (0x0020)
+#define MCF_DTIM_DTMR_CE(x)      (((x)&0x0003)<<6)
+#define MCF_DTIM_DTMR_PS(x)      (((x)&0x00FF)<<8)
+#define MCF_DTIM_DTMR_CE_ANY     (0x00C0)
+#define MCF_DTIM_DTMR_CE_FALL    (0x0080)
+#define MCF_DTIM_DTMR_CE_RISE    (0x0040)
+#define MCF_DTIM_DTMR_CE_NONE    (0x0000)
+#define MCF_DTIM_DTMR_CLK_DTIN   (0x0006)
+#define MCF_DTIM_DTMR_CLK_DIV16  (0x0004)
+#define MCF_DTIM_DTMR_CLK_DIV1   (0x0002)
+#define MCF_DTIM_DTMR_CLK_STOP   (0x0000)
+
+/* Bit definitions and macros for MCF_DTIM_DTXMR */
+#define MCF_DTIM_DTXMR_MODE16    (0x01)
+#define MCF_DTIM_DTXMR_DMAEN     (0x80)
+
+/* Bit definitions and macros for MCF_DTIM_DTER */
+#define MCF_DTIM_DTER_CAP        (0x01)
+#define MCF_DTIM_DTER_REF        (0x02)
+
+/* Bit definitions and macros for MCF_DTIM_DTRR */
+#define MCF_DTIM_DTRR_REF(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCR */
+#define MCF_DTIM_DTCR_CAP(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_DTIM_DTCN */
+#define MCF_DTIM_DTCN_CNT(x)     (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * FlexBus Chip Selects (FBCS)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_FBCS0_CSAR          MCF_REG32(0xFC008000)
+#define MCF_FBCS0_CSMR          MCF_REG32(0xFC008004)
+#define MCF_FBCS0_CSCR          MCF_REG32(0xFC008008)
+#define MCF_FBCS1_CSAR          MCF_REG32(0xFC00800C)
+#define MCF_FBCS1_CSMR          MCF_REG32(0xFC008010)
+#define MCF_FBCS1_CSCR          MCF_REG32(0xFC008014)
+#define MCF_FBCS2_CSAR          MCF_REG32(0xFC008018)
+#define MCF_FBCS2_CSMR          MCF_REG32(0xFC00801C)
+#define MCF_FBCS2_CSCR          MCF_REG32(0xFC008020)
+#define MCF_FBCS3_CSAR          MCF_REG32(0xFC008024)
+#define MCF_FBCS3_CSMR          MCF_REG32(0xFC008028)
+#define MCF_FBCS3_CSCR          MCF_REG32(0xFC00802C)
+#define MCF_FBCS4_CSAR          MCF_REG32(0xFC008030)
+#define MCF_FBCS4_CSMR          MCF_REG32(0xFC008034)
+#define MCF_FBCS4_CSCR          MCF_REG32(0xFC008038)
+#define MCF_FBCS5_CSAR          MCF_REG32(0xFC00803C)
+#define MCF_FBCS5_CSMR          MCF_REG32(0xFC008040)
+#define MCF_FBCS5_CSCR          MCF_REG32(0xFC008044)
+#define MCF_FBCS_CSAR(x)        MCF_REG32(0xFC008000+((x)*0x00C))
+#define MCF_FBCS_CSMR(x)        MCF_REG32(0xFC008004+((x)*0x00C))
+#define MCF_FBCS_CSCR(x)        MCF_REG32(0xFC008008+((x)*0x00C))
+
+/* Bit definitions and macros for MCF_FBCS_CSAR */
+#define MCF_FBCS_CSAR_BA(x)     ((x)&0xFFFF0000)
+
+/* Bit definitions and macros for MCF_FBCS_CSMR */
+#define MCF_FBCS_CSMR_V         (0x00000001)
+#define MCF_FBCS_CSMR_WP        (0x00000100)
+#define MCF_FBCS_CSMR_BAM(x)    (((x)&0x0000FFFF)<<16)
+#define MCF_FBCS_CSMR_BAM_4G    (0xFFFF0000)
+#define MCF_FBCS_CSMR_BAM_2G    (0x7FFF0000)
+#define MCF_FBCS_CSMR_BAM_1G    (0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_1024M (0x3FFF0000)
+#define MCF_FBCS_CSMR_BAM_512M  (0x1FFF0000)
+#define MCF_FBCS_CSMR_BAM_256M  (0x0FFF0000)
+#define MCF_FBCS_CSMR_BAM_128M  (0x07FF0000)
+#define MCF_FBCS_CSMR_BAM_64M   (0x03FF0000)
+#define MCF_FBCS_CSMR_BAM_32M   (0x01FF0000)
+#define MCF_FBCS_CSMR_BAM_16M   (0x00FF0000)
+#define MCF_FBCS_CSMR_BAM_8M    (0x007F0000)
+#define MCF_FBCS_CSMR_BAM_4M    (0x003F0000)
+#define MCF_FBCS_CSMR_BAM_2M    (0x001F0000)
+#define MCF_FBCS_CSMR_BAM_1M    (0x000F0000)
+#define MCF_FBCS_CSMR_BAM_1024K (0x000F0000)
+#define MCF_FBCS_CSMR_BAM_512K  (0x00070000)
+#define MCF_FBCS_CSMR_BAM_256K  (0x00030000)
+#define MCF_FBCS_CSMR_BAM_128K  (0x00010000)
+#define MCF_FBCS_CSMR_BAM_64K   (0x00000000)
+
+/* Bit definitions and macros for MCF_FBCS_CSCR */
+#define MCF_FBCS_CSCR_BSTW      (0x00000008)
+#define MCF_FBCS_CSCR_BSTR      (0x00000010)
+#define MCF_FBCS_CSCR_BEM       (0x00000020)
+#define MCF_FBCS_CSCR_PS(x)     (((x)&0x00000003)<<6)
+#define MCF_FBCS_CSCR_AA        (0x00000100)
+#define MCF_FBCS_CSCR_SBM       (0x00000200)
+#define MCF_FBCS_CSCR_WS(x)     (((x)&0x0000003F)<<10)
+#define MCF_FBCS_CSCR_WRAH(x)   (((x)&0x00000003)<<16)
+#define MCF_FBCS_CSCR_RDAH(x)   (((x)&0x00000003)<<18)
+#define MCF_FBCS_CSCR_ASET(x)   (((x)&0x00000003)<<20)
+#define MCF_FBCS_CSCR_SWSEN     (0x00800000)
+#define MCF_FBCS_CSCR_SWS(x)    (((x)&0x0000003F)<<26)
+#define MCF_FBCS_CSCR_PS_8      (0x0040)
+#define MCF_FBCS_CSCR_PS_16     (0x0080)
+#define MCF_FBCS_CSCR_PS_32     (0x0000)
+
+/*********************************************************************
+ *
+ * General Purpose I/O (GPIO)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_GPIO_PODR_FECH              MCF_REG08(0xFC0A4000)
+#define MCF_GPIO_PODR_FECL              MCF_REG08(0xFC0A4001)
+#define MCF_GPIO_PODR_SSI               MCF_REG08(0xFC0A4002)
+#define MCF_GPIO_PODR_BUSCTL            MCF_REG08(0xFC0A4003)
+#define MCF_GPIO_PODR_BE                MCF_REG08(0xFC0A4004)
+#define MCF_GPIO_PODR_CS                MCF_REG08(0xFC0A4005)
+#define MCF_GPIO_PODR_PWM               MCF_REG08(0xFC0A4006)
+#define MCF_GPIO_PODR_FECI2C            MCF_REG08(0xFC0A4007)
+#define MCF_GPIO_PODR_UART              MCF_REG08(0xFC0A4009)
+#define MCF_GPIO_PODR_QSPI              MCF_REG08(0xFC0A400A)
+#define MCF_GPIO_PODR_TIMER             MCF_REG08(0xFC0A400B)
+#define MCF_GPIO_PODR_LCDDATAH          MCF_REG08(0xFC0A400D)
+#define MCF_GPIO_PODR_LCDDATAM          MCF_REG08(0xFC0A400E)
+#define MCF_GPIO_PODR_LCDDATAL          MCF_REG08(0xFC0A400F)
+#define MCF_GPIO_PODR_LCDCTLH           MCF_REG08(0xFC0A4010)
+#define MCF_GPIO_PODR_LCDCTLL           MCF_REG08(0xFC0A4011)
+#define MCF_GPIO_PDDR_FECH              MCF_REG08(0xFC0A4014)
+#define MCF_GPIO_PDDR_FECL              MCF_REG08(0xFC0A4015)
+#define MCF_GPIO_PDDR_SSI               MCF_REG08(0xFC0A4016)
+#define MCF_GPIO_PDDR_BUSCTL            MCF_REG08(0xFC0A4017)
+#define MCF_GPIO_PDDR_BE                MCF_REG08(0xFC0A4018)
+#define MCF_GPIO_PDDR_CS                MCF_REG08(0xFC0A4019)
+#define MCF_GPIO_PDDR_PWM               MCF_REG08(0xFC0A401A)
+#define MCF_GPIO_PDDR_FECI2C            MCF_REG08(0xFC0A401B)
+#define MCF_GPIO_PDDR_UART              MCF_REG08(0xFC0A401C)
+#define MCF_GPIO_PDDR_QSPI              MCF_REG08(0xFC0A401E)
+#define MCF_GPIO_PDDR_TIMER             MCF_REG08(0xFC0A401F)
+#define MCF_GPIO_PDDR_LCDDATAH          MCF_REG08(0xFC0A4021)
+#define MCF_GPIO_PDDR_LCDDATAM          MCF_REG08(0xFC0A4022)
+#define MCF_GPIO_PDDR_LCDDATAL          MCF_REG08(0xFC0A4023)
+#define MCF_GPIO_PDDR_LCDCTLH           MCF_REG08(0xFC0A4024)
+#define MCF_GPIO_PDDR_LCDCTLL           MCF_REG08(0xFC0A4025)
+#define MCF_GPIO_PPDSDR_FECH            MCF_REG08(0xFC0A4028)
+#define MCF_GPIO_PPDSDR_FECL            MCF_REG08(0xFC0A4029)
+#define MCF_GPIO_PPDSDR_SSI             MCF_REG08(0xFC0A402A)
+#define MCF_GPIO_PPDSDR_BUSCTL          MCF_REG08(0xFC0A402B)
+#define MCF_GPIO_PPDSDR_BE              MCF_REG08(0xFC0A402C)
+#define MCF_GPIO_PPDSDR_CS              MCF_REG08(0xFC0A402D)
+#define MCF_GPIO_PPDSDR_PWM             MCF_REG08(0xFC0A402E)
+#define MCF_GPIO_PPDSDR_FECI2C          MCF_REG08(0xFC0A402F)
+#define MCF_GPIO_PPDSDR_UART            MCF_REG08(0xFC0A4031)
+#define MCF_GPIO_PPDSDR_QSPI            MCF_REG08(0xFC0A4032)
+#define MCF_GPIO_PPDSDR_TIMER           MCF_REG08(0xFC0A4033)
+#define MCF_GPIO_PPDSDR_LCDDATAH        MCF_REG08(0xFC0A4035)
+#define MCF_GPIO_PPDSDR_LCDDATAM        MCF_REG08(0xFC0A4036)
+#define MCF_GPIO_PPDSDR_LCDDATAL        MCF_REG08(0xFC0A4037)
+#define MCF_GPIO_PPDSDR_LCDCTLH         MCF_REG08(0xFC0A4038)
+#define MCF_GPIO_PPDSDR_LCDCTLL         MCF_REG08(0xFC0A4039)
+#define MCF_GPIO_PCLRR_FECH             MCF_REG08(0xFC0A403C)
+#define MCF_GPIO_PCLRR_FECL             MCF_REG08(0xFC0A403D)
+#define MCF_GPIO_PCLRR_SSI              MCF_REG08(0xFC0A403E)
+#define MCF_GPIO_PCLRR_BUSCTL           MCF_REG08(0xFC0A403F)
+#define MCF_GPIO_PCLRR_BE               MCF_REG08(0xFC0A4040)
+#define MCF_GPIO_PCLRR_CS               MCF_REG08(0xFC0A4041)
+#define MCF_GPIO_PCLRR_PWM              MCF_REG08(0xFC0A4042)
+#define MCF_GPIO_PCLRR_FECI2C           MCF_REG08(0xFC0A4043)
+#define MCF_GPIO_PCLRR_UART             MCF_REG08(0xFC0A4045)
+#define MCF_GPIO_PCLRR_QSPI             MCF_REG08(0xFC0A4046)
+#define MCF_GPIO_PCLRR_TIMER            MCF_REG08(0xFC0A4047)
+#define MCF_GPIO_PCLRR_LCDDATAH         MCF_REG08(0xFC0A4049)
+#define MCF_GPIO_PCLRR_LCDDATAM         MCF_REG08(0xFC0A404A)
+#define MCF_GPIO_PCLRR_LCDDATAL         MCF_REG08(0xFC0A404B)
+#define MCF_GPIO_PCLRR_LCDCTLH          MCF_REG08(0xFC0A404C)
+#define MCF_GPIO_PCLRR_LCDCTLL          MCF_REG08(0xFC0A404D)
+#define MCF_GPIO_PAR_FEC                MCF_REG08(0xFC0A4050)
+#define MCF_GPIO_PAR_PWM                MCF_REG08(0xFC0A4051)
+#define MCF_GPIO_PAR_BUSCTL             MCF_REG08(0xFC0A4052)
+#define MCF_GPIO_PAR_FECI2C             MCF_REG08(0xFC0A4053)
+#define MCF_GPIO_PAR_BE                 MCF_REG08(0xFC0A4054)
+#define MCF_GPIO_PAR_CS                 MCF_REG08(0xFC0A4055)
+#define MCF_GPIO_PAR_SSI                MCF_REG16(0xFC0A4056)
+#define MCF_GPIO_PAR_UART               MCF_REG16(0xFC0A4058)
+#define MCF_GPIO_PAR_QSPI               MCF_REG16(0xFC0A405A)
+#define MCF_GPIO_PAR_TIMER              MCF_REG08(0xFC0A405C)
+#define MCF_GPIO_PAR_LCDDATA            MCF_REG08(0xFC0A405D)
+#define MCF_GPIO_PAR_LCDCTL             MCF_REG16(0xFC0A405E)
+#define MCF_GPIO_PAR_IRQ                MCF_REG16(0xFC0A4060)
+#define MCF_GPIO_MSCR_FLEXBUS           MCF_REG08(0xFC0A4064)
+#define MCF_GPIO_MSCR_SDRAM             MCF_REG08(0xFC0A4065)
+#define MCF_GPIO_DSCR_I2C               MCF_REG08(0xFC0A4068)
+#define MCF_GPIO_DSCR_PWM               MCF_REG08(0xFC0A4069)
+#define MCF_GPIO_DSCR_FEC               MCF_REG08(0xFC0A406A)
+#define MCF_GPIO_DSCR_UART              MCF_REG08(0xFC0A406B)
+#define MCF_GPIO_DSCR_QSPI              MCF_REG08(0xFC0A406C)
+#define MCF_GPIO_DSCR_TIMER             MCF_REG08(0xFC0A406D)
+#define MCF_GPIO_DSCR_SSI               MCF_REG08(0xFC0A406E)
+#define MCF_GPIO_DSCR_LCD               MCF_REG08(0xFC0A406F)
+#define MCF_GPIO_DSCR_DEBUG             MCF_REG08(0xFC0A4070)
+#define MCF_GPIO_DSCR_CLKRST            MCF_REG08(0xFC0A4071)
+#define MCF_GPIO_DSCR_IRQ               MCF_REG08(0xFC0A4072)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECH */
+#define MCF_GPIO_PODR_FECH_PODR_FECH0              (0x01)
+#define MCF_GPIO_PODR_FECH_PODR_FECH1              (0x02)
+#define MCF_GPIO_PODR_FECH_PODR_FECH2              (0x04)
+#define MCF_GPIO_PODR_FECH_PODR_FECH3              (0x08)
+#define MCF_GPIO_PODR_FECH_PODR_FECH4              (0x10)
+#define MCF_GPIO_PODR_FECH_PODR_FECH5              (0x20)
+#define MCF_GPIO_PODR_FECH_PODR_FECH6              (0x40)
+#define MCF_GPIO_PODR_FECH_PODR_FECH7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECL */
+#define MCF_GPIO_PODR_FECL_PODR_FECL0              (0x01)
+#define MCF_GPIO_PODR_FECL_PODR_FECL1              (0x02)
+#define MCF_GPIO_PODR_FECL_PODR_FECL2              (0x04)
+#define MCF_GPIO_PODR_FECL_PODR_FECL3              (0x08)
+#define MCF_GPIO_PODR_FECL_PODR_FECL4              (0x10)
+#define MCF_GPIO_PODR_FECL_PODR_FECL5              (0x20)
+#define MCF_GPIO_PODR_FECL_PODR_FECL6              (0x40)
+#define MCF_GPIO_PODR_FECL_PODR_FECL7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_SSI */
+#define MCF_GPIO_PODR_SSI_PODR_SSI0                (0x01)
+#define MCF_GPIO_PODR_SSI_PODR_SSI1                (0x02)
+#define MCF_GPIO_PODR_SSI_PODR_SSI2                (0x04)
+#define MCF_GPIO_PODR_SSI_PODR_SSI3                (0x08)
+#define MCF_GPIO_PODR_SSI_PODR_SSI4                (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BUSCTL */
+#define MCF_GPIO_PODR_BUSCTL_POSDR_BUSCTL0         (0x01)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL1          (0x02)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL2          (0x04)
+#define MCF_GPIO_PODR_BUSCTL_PODR_BUSCTL3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_BE */
+#define MCF_GPIO_PODR_BE_PODR_BE0                  (0x01)
+#define MCF_GPIO_PODR_BE_PODR_BE1                  (0x02)
+#define MCF_GPIO_PODR_BE_PODR_BE2                  (0x04)
+#define MCF_GPIO_PODR_BE_PODR_BE3                  (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_CS */
+#define MCF_GPIO_PODR_CS_PODR_CS1                  (0x02)
+#define MCF_GPIO_PODR_CS_PODR_CS2                  (0x04)
+#define MCF_GPIO_PODR_CS_PODR_CS3                  (0x08)
+#define MCF_GPIO_PODR_CS_PODR_CS4                  (0x10)
+#define MCF_GPIO_PODR_CS_PODR_CS5                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_PWM */
+#define MCF_GPIO_PODR_PWM_PODR_PWM2                (0x04)
+#define MCF_GPIO_PODR_PWM_PODR_PWM3                (0x08)
+#define MCF_GPIO_PODR_PWM_PODR_PWM4                (0x10)
+#define MCF_GPIO_PODR_PWM_PODR_PWM5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_FECI2C */
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C0          (0x01)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C1          (0x02)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C2          (0x04)
+#define MCF_GPIO_PODR_FECI2C_PODR_FECI2C3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_UART */
+#define MCF_GPIO_PODR_UART_PODR_UART0              (0x01)
+#define MCF_GPIO_PODR_UART_PODR_UART1              (0x02)
+#define MCF_GPIO_PODR_UART_PODR_UART2              (0x04)
+#define MCF_GPIO_PODR_UART_PODR_UART3              (0x08)
+#define MCF_GPIO_PODR_UART_PODR_UART4              (0x10)
+#define MCF_GPIO_PODR_UART_PODR_UART5              (0x20)
+#define MCF_GPIO_PODR_UART_PODR_UART6              (0x40)
+#define MCF_GPIO_PODR_UART_PODR_UART7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_QSPI */
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI0              (0x01)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI1              (0x02)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI2              (0x04)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI3              (0x08)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI4              (0x10)
+#define MCF_GPIO_PODR_QSPI_PODR_QSPI5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_TIMER */
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER0            (0x01)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER1            (0x02)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER2            (0x04)
+#define MCF_GPIO_PODR_TIMER_PODR_TIMER3            (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAH */
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAH_PODR_LCDDATAH1      (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAM */
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM1      (0x02)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM2      (0x04)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM3      (0x08)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM4      (0x10)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM5      (0x20)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM6      (0x40)
+#define MCF_GPIO_PODR_LCDDATAM_PODR_LCDDATAM7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDDATAL */
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL0      (0x01)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL1      (0x02)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL2      (0x04)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL3      (0x08)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL4      (0x10)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL5      (0x20)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL6      (0x40)
+#define MCF_GPIO_PODR_LCDDATAL_PODR_LCDDATAL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLH */
+#define MCF_GPIO_PODR_LCDCTLH_PODR_LCDCTLH0        (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PODR_LCDCTLL */
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL0        (0x01)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL1        (0x02)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL2        (0x04)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL3        (0x08)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL4        (0x10)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL5        (0x20)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL6        (0x40)
+#define MCF_GPIO_PODR_LCDCTLL_PODR_LCDCTLL7        (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECH */
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH0              (0x01)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH1              (0x02)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH2              (0x04)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH3              (0x08)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH4              (0x10)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH5              (0x20)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH6              (0x40)
+#define MCF_GPIO_PDDR_FECH_PDDR_FECH7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECL */
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL0              (0x01)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL1              (0x02)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL2              (0x04)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL3              (0x08)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL4              (0x10)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL5              (0x20)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL6              (0x40)
+#define MCF_GPIO_PDDR_FECL_PDDR_FECL7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_SSI */
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI0                (0x01)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI1                (0x02)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI2                (0x04)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI3                (0x08)
+#define MCF_GPIO_PDDR_SSI_PDDR_SSI4                (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BUSCTL */
+#define MCF_GPIO_PDDR_BUSCTL_POSDR_BUSCTL0         (0x01)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL1          (0x02)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL2          (0x04)
+#define MCF_GPIO_PDDR_BUSCTL_PDDR_BUSCTL3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_BE */
+#define MCF_GPIO_PDDR_BE_PDDR_BE0                  (0x01)
+#define MCF_GPIO_PDDR_BE_PDDR_BE1                  (0x02)
+#define MCF_GPIO_PDDR_BE_PDDR_BE2                  (0x04)
+#define MCF_GPIO_PDDR_BE_PDDR_BE3                  (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_CS */
+#define MCF_GPIO_PDDR_CS_PDDR_CS1                  (0x02)
+#define MCF_GPIO_PDDR_CS_PDDR_CS2                  (0x04)
+#define MCF_GPIO_PDDR_CS_PDDR_CS3                  (0x08)
+#define MCF_GPIO_PDDR_CS_PDDR_CS4                  (0x10)
+#define MCF_GPIO_PDDR_CS_PDDR_CS5                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_PWM */
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM2                (0x04)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM3                (0x08)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM4                (0x10)
+#define MCF_GPIO_PDDR_PWM_PDDR_PWM5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_FECI2C */
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C0          (0x01)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C1          (0x02)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C2          (0x04)
+#define MCF_GPIO_PDDR_FECI2C_PDDR_FECI2C3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_UART */
+#define MCF_GPIO_PDDR_UART_PDDR_UART0              (0x01)
+#define MCF_GPIO_PDDR_UART_PDDR_UART1              (0x02)
+#define MCF_GPIO_PDDR_UART_PDDR_UART2              (0x04)
+#define MCF_GPIO_PDDR_UART_PDDR_UART3              (0x08)
+#define MCF_GPIO_PDDR_UART_PDDR_UART4              (0x10)
+#define MCF_GPIO_PDDR_UART_PDDR_UART5              (0x20)
+#define MCF_GPIO_PDDR_UART_PDDR_UART6              (0x40)
+#define MCF_GPIO_PDDR_UART_PDDR_UART7              (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_QSPI */
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI0              (0x01)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI1              (0x02)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI2              (0x04)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI3              (0x08)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI4              (0x10)
+#define MCF_GPIO_PDDR_QSPI_PDDR_QSPI5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_TIMER */
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER0            (0x01)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER1            (0x02)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER2            (0x04)
+#define MCF_GPIO_PDDR_TIMER_PDDR_TIMER3            (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAH */
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAH_PDDR_LCDDATAH1      (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAM */
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM1      (0x02)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM2      (0x04)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM3      (0x08)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM4      (0x10)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM5      (0x20)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM6      (0x40)
+#define MCF_GPIO_PDDR_LCDDATAM_PDDR_LCDDATAM7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDDATAL */
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL0      (0x01)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL1      (0x02)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL2      (0x04)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL3      (0x08)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL4      (0x10)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL5      (0x20)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL6      (0x40)
+#define MCF_GPIO_PDDR_LCDDATAL_PDDR_LCDDATAL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLH */
+#define MCF_GPIO_PDDR_LCDCTLH_PDDR_LCDCTLH0        (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PDDR_LCDCTLL */
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL0        (0x01)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL1        (0x02)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL2        (0x04)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL3        (0x08)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL4        (0x10)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL5        (0x20)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL6        (0x40)
+#define MCF_GPIO_PDDR_LCDCTLL_PDDR_LCDCTLL7        (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECH */
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH0          (0x01)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH1          (0x02)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH2          (0x04)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH3          (0x08)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH4          (0x10)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH5          (0x20)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH6          (0x40)
+#define MCF_GPIO_PPDSDR_FECH_PPDSDR_FECH7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECL */
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL0          (0x01)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL1          (0x02)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL2          (0x04)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL3          (0x08)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL4          (0x10)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL5          (0x20)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL6          (0x40)
+#define MCF_GPIO_PPDSDR_FECL_PPDSDR_FECL7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_SSI */
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI0            (0x01)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI1            (0x02)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI2            (0x04)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI3            (0x08)
+#define MCF_GPIO_PPDSDR_SSI_PPDSDR_SSI4            (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BUSCTL */
+#define MCF_GPIO_PPDSDR_BUSCTL_POSDR_BUSCTL0       (0x01)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL1      (0x02)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL2      (0x04)
+#define MCF_GPIO_PPDSDR_BUSCTL_PPDSDR_BUSCTL3      (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_BE */
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE0              (0x01)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE1              (0x02)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE2              (0x04)
+#define MCF_GPIO_PPDSDR_BE_PPDSDR_BE3              (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_CS */
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS1              (0x02)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS2              (0x04)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS3              (0x08)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS4              (0x10)
+#define MCF_GPIO_PPDSDR_CS_PPDSDR_CS5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_PWM */
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM2            (0x04)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM3            (0x08)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM4            (0x10)
+#define MCF_GPIO_PPDSDR_PWM_PPDSDR_PWM5            (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_FECI2C */
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C0      (0x01)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C1      (0x02)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C2      (0x04)
+#define MCF_GPIO_PPDSDR_FECI2C_PPDSDR_FECI2C3      (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_UART */
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART0          (0x01)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART1          (0x02)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART2          (0x04)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART3          (0x08)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART4          (0x10)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART5          (0x20)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART6          (0x40)
+#define MCF_GPIO_PPDSDR_UART_PPDSDR_UART7          (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_QSPI */
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI0          (0x01)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI1          (0x02)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI2          (0x04)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI3          (0x08)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI4          (0x10)
+#define MCF_GPIO_PPDSDR_QSPI_PPDSDR_QSPI5          (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_TIMER */
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER0        (0x01)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER1        (0x02)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER2        (0x04)
+#define MCF_GPIO_PPDSDR_TIMER_PPDSDR_TIMER3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAH */
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAH_PPDSDR_LCDDATAH1  (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAM */
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM1  (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM2  (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM3  (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM4  (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM5  (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM6  (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAM_PPDSDR_LCDDATAM7  (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDDATAL */
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL0  (0x01)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL1  (0x02)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL2  (0x04)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL3  (0x08)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL4  (0x10)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL5  (0x20)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL6  (0x40)
+#define MCF_GPIO_PPDSDR_LCDDATAL_PPDSDR_LCDDATAL7  (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLH */
+#define MCF_GPIO_PPDSDR_LCDCTLH_PPDSDR_LCDCTLH0    (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PPDSDR_LCDCTLL */
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL0    (0x01)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL1    (0x02)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL2    (0x04)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL3    (0x08)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL4    (0x10)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL5    (0x20)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL6    (0x40)
+#define MCF_GPIO_PPDSDR_LCDCTLL_PPDSDR_LCDCTLL7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECH */
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH0            (0x01)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH1            (0x02)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH2            (0x04)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH3            (0x08)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH4            (0x10)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH5            (0x20)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH6            (0x40)
+#define MCF_GPIO_PCLRR_FECH_PCLRR_FECH7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECL */
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL0            (0x01)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL1            (0x02)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL2            (0x04)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL3            (0x08)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL4            (0x10)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL5            (0x20)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL6            (0x40)
+#define MCF_GPIO_PCLRR_FECL_PCLRR_FECL7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_SSI */
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI0              (0x01)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI1              (0x02)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI2              (0x04)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI3              (0x08)
+#define MCF_GPIO_PCLRR_SSI_PCLRR_SSI4              (0x10)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BUSCTL */
+#define MCF_GPIO_PCLRR_BUSCTL_POSDR_BUSCTL0        (0x01)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL1        (0x02)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL2        (0x04)
+#define MCF_GPIO_PCLRR_BUSCTL_PCLRR_BUSCTL3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_BE */
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE0                (0x01)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE1                (0x02)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE2                (0x04)
+#define MCF_GPIO_PCLRR_BE_PCLRR_BE3                (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_CS */
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS1                (0x02)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS2                (0x04)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS3                (0x08)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS4                (0x10)
+#define MCF_GPIO_PCLRR_CS_PCLRR_CS5                (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_PWM */
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM2              (0x04)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM3              (0x08)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM4              (0x10)
+#define MCF_GPIO_PCLRR_PWM_PCLRR_PWM5              (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_FECI2C */
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C0        (0x01)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C1        (0x02)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C2        (0x04)
+#define MCF_GPIO_PCLRR_FECI2C_PCLRR_FECI2C3        (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_UART */
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART0            (0x01)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART1            (0x02)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART2            (0x04)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART3            (0x08)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART4            (0x10)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART5            (0x20)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART6            (0x40)
+#define MCF_GPIO_PCLRR_UART_PCLRR_UART7            (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_QSPI */
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI0            (0x01)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI1            (0x02)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI2            (0x04)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI3            (0x08)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI4            (0x10)
+#define MCF_GPIO_PCLRR_QSPI_PCLRR_QSPI5            (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_TIMER */
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER0          (0x01)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER1          (0x02)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER2          (0x04)
+#define MCF_GPIO_PCLRR_TIMER_PCLRR_TIMER3          (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAH */
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAH_PCLRR_LCDDATAH1    (0x02)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAM */
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM1    (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM2    (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM3    (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM4    (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM5    (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM6    (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAM_PCLRR_LCDDATAM7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDDATAL */
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL0    (0x01)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL1    (0x02)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL2    (0x04)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL3    (0x08)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL4    (0x10)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL5    (0x20)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL6    (0x40)
+#define MCF_GPIO_PCLRR_LCDDATAL_PCLRR_LCDDATAL7    (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLH */
+#define MCF_GPIO_PCLRR_LCDCTLH_PCLRR_LCDCTLH0      (0x01)
+
+/* Bit definitions and macros for MCF_GPIO_PCLRR_LCDCTLL */
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL0      (0x01)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL1      (0x02)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL2      (0x04)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL3      (0x08)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL4      (0x10)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL5      (0x20)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL6      (0x40)
+#define MCF_GPIO_PCLRR_LCDCTLL_PCLRR_LCDCTLL7      (0x80)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FEC */
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII(x)            (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_GPIO           (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_URTS1          (0x04)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC            (0x0C)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_GPIO          (0x00)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_UART          (0x01)
+#define MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC           (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_PWM */
+#define MCF_GPIO_PAR_PWM_PAR_PWM1(x)               (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_PWM_PAR_PWM3(x)               (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_PWM_PAR_PWM5                  (0x10)
+#define MCF_GPIO_PAR_PWM_PAR_PWM7                  (0x20)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BUSCTL */
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS(x)              (((x)&0x03)<<3)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB                (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA                 (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE                 (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_OE_OE              (0x80)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TA_TA              (0x40)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_GPIO           (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_RWB_RWB            (0x20)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_GPIO            (0x00)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_DACK0           (0x10)
+#define MCF_GPIO_PAR_BUSCTL_PAR_TS_TS              (0x18)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_FECI2C */
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA(x)             (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO(x)            (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC(x)             (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_UTXD2          (0x40)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_SCL            (0x80)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC           (0xC0)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_GPIO          (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_URXD2         (0x10)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_SDA           (0x20)
+#define MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO         (0x30)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2          (0x04)
+#define MCF_GPIO_PAR_FECI2C_PAR_SCL_SCL            (0x0C)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_GPIO           (0x00)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2          (0x02)
+#define MCF_GPIO_PAR_FECI2C_PAR_SDA_SDA            (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_BE */
+#define MCF_GPIO_PAR_BE_PAR_BE0                    (0x01)
+#define MCF_GPIO_PAR_BE_PAR_BE1                    (0x02)
+#define MCF_GPIO_PAR_BE_PAR_BE2                    (0x04)
+#define MCF_GPIO_PAR_BE_PAR_BE3                    (0x08)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_CS */
+#define MCF_GPIO_PAR_CS_PAR_CS1                    (0x02)
+#define MCF_GPIO_PAR_CS_PAR_CS2                    (0x04)
+#define MCF_GPIO_PAR_CS_PAR_CS3                    (0x08)
+#define MCF_GPIO_PAR_CS_PAR_CS4                    (0x10)
+#define MCF_GPIO_PAR_CS_PAR_CS5                    (0x20)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_GPIO            (0x00)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_SDCS1           (0x01)
+#define MCF_GPIO_PAR_CS_PAR_CS_CS1_CS1             (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_SSI */
+#define MCF_GPIO_PAR_SSI_PAR_MCLK                  (0x0080)
+#define MCF_GPIO_PAR_SSI_PAR_TXD(x)                (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_SSI_PAR_RXD(x)                (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_SSI_PAR_FS(x)                 (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_SSI_PAR_BCLK(x)               (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_UART */
+#define MCF_GPIO_PAR_UART_PAR_UTXD0                (0x0001)
+#define MCF_GPIO_PAR_UART_PAR_URXD0                (0x0002)
+#define MCF_GPIO_PAR_UART_PAR_URTS0                (0x0004)
+#define MCF_GPIO_PAR_UART_PAR_UCTS0                (0x0008)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1(x)             (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_UART_PAR_URXD1(x)             (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_UART_PAR_URTS1(x)             (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1(x)             (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_SSI_BCLK       (0x0800)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_ULPI_D7        (0x0400)
+#define MCF_GPIO_PAR_UART_PAR_UCTS1_UCTS1          (0x0C00)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_SSI_FS         (0x0200)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_ULPI_D6        (0x0100)
+#define MCF_GPIO_PAR_UART_PAR_URTS1_URTS1          (0x0300)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_SSI_RXD        (0x0080)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_ULPI_D5        (0x0040)
+#define MCF_GPIO_PAR_UART_PAR_URXD1_URXD1          (0x00C0)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_GPIO           (0x0000)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_SSI_TXD        (0x0020)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_ULPI_D4        (0x0010)
+#define MCF_GPIO_PAR_UART_PAR_UTXD1_UTXD1          (0x0030)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_QSPI */
+#define MCF_GPIO_PAR_QSPI_PAR_SCK(x)               (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_QSPI_PAR_DOUT(x)              (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_QSPI_PAR_DIN(x)               (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS0(x)              (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS1(x)              (((x)&0x0003)<<12)
+#define MCF_GPIO_PAR_QSPI_PAR_PCS2(x)              (((x)&0x0003)<<14)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_TIMER */
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0(x)             (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1(x)             (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2(x)             (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3(x)             (((x)&0x03)<<6)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TOUT3          (0x80)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_URXD2          (0x40)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN3_TIN3           (0xC0)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TOUT2          (0x20)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_UTXD2          (0x10)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN2_TIN2           (0x30)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TOUT1          (0x08)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_DACK1          (0x04)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN1_TIN1           (0x0C)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_GPIO           (0x00)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TOUT0          (0x02)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_DREQ0          (0x01)
+#define MCF_GPIO_PAR_TIMER_PAR_TIN0_TIN0           (0x03)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDDATA */
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD7_0(x)          (((x)&0x03)<<0)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD15_8(x)         (((x)&0x03)<<2)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD16(x)           (((x)&0x03)<<4)
+#define MCF_GPIO_PAR_LCDDATA_PAR_LD17(x)           (((x)&0x03)<<6)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_LCDCTL */
+#define MCF_GPIO_PAR_LCDCTL_PAR_CLS                (0x0001)
+#define MCF_GPIO_PAR_LCDCTL_PAR_PS                 (0x0002)
+#define MCF_GPIO_PAR_LCDCTL_PAR_REV                (0x0004)
+#define MCF_GPIO_PAR_LCDCTL_PAR_SPL_SPR            (0x0008)
+#define MCF_GPIO_PAR_LCDCTL_PAR_CONTRAST           (0x0010)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LSCLK              (0x0020)
+#define MCF_GPIO_PAR_LCDCTL_PAR_LP_HSYNC           (0x0040)
+#define MCF_GPIO_PAR_LCDCTL_PAR_FLM_VSYNC          (0x0080)
+#define MCF_GPIO_PAR_LCDCTL_PAR_ACD_OE             (0x0100)
+
+/* Bit definitions and macros for MCF_GPIO_PAR_IRQ */
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ1(x)               (((x)&0x0003)<<4)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ2(x)               (((x)&0x0003)<<6)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ4(x)               (((x)&0x0003)<<8)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ5(x)               (((x)&0x0003)<<10)
+#define MCF_GPIO_PAR_IRQ_PAR_IRQ6(x)               (((x)&0x0003)<<12)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_FLEXBUS */
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_ADDRCTL(x)      (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DLOWER(x)       (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_FLEXBUS_MSCR_DUPPER(x)       (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_MSCR_SDRAM */
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDRAM(x)          (((x)&0x03)<<0)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLK(x)          (((x)&0x03)<<2)
+#define MCF_GPIO_MSCR_SDRAM_MSCR_SDCLKB(x)         (((x)&0x03)<<4)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_I2C */
+#define MCF_GPIO_DSCR_I2C_I2C_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_PWM */
+#define MCF_GPIO_DSCR_PWM_PWM_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_FEC */
+#define MCF_GPIO_DSCR_FEC_FEC_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_UART */
+#define MCF_GPIO_DSCR_UART_UART0_DSE(x)            (((x)&0x03)<<0)
+#define MCF_GPIO_DSCR_UART_UART1_DSE(x)            (((x)&0x03)<<2)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_QSPI */
+#define MCF_GPIO_DSCR_QSPI_QSPI_DSE(x)             (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_TIMER */
+#define MCF_GPIO_DSCR_TIMER_TIMER_DSE(x)           (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_SSI */
+#define MCF_GPIO_DSCR_SSI_SSI_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_LCD */
+#define MCF_GPIO_DSCR_LCD_LCD_DSE(x)               (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_DEBUG */
+#define MCF_GPIO_DSCR_DEBUG_DEBUG_DSE(x)           (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_CLKRST */
+#define MCF_GPIO_DSCR_CLKRST_CLKRST_DSE(x)         (((x)&0x03)<<0)
+
+/* Bit definitions and macros for MCF_GPIO_DSCR_IRQ */
+#define MCF_GPIO_DSCR_IRQ_IRQ_DSE(x)               (((x)&0x03)<<0)
+
+/*********************************************************************
+ *
+ * Interrupt Controller (INTC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_INTC0_IPRH             MCF_REG32(0xFC048000)
+#define MCF_INTC0_IPRL             MCF_REG32(0xFC048004)
+#define MCF_INTC0_IMRH             MCF_REG32(0xFC048008)
+#define MCF_INTC0_IMRL             MCF_REG32(0xFC04800C)
+#define MCF_INTC0_INTFRCH          MCF_REG32(0xFC048010)
+#define MCF_INTC0_INTFRCL          MCF_REG32(0xFC048014)
+#define MCF_INTC0_ICONFIG          MCF_REG16(0xFC04801A)
+#define MCF_INTC0_SIMR             MCF_REG08(0xFC04801C)
+#define MCF_INTC0_CIMR             MCF_REG08(0xFC04801D)
+#define MCF_INTC0_CLMASK           MCF_REG08(0xFC04801E)
+#define MCF_INTC0_SLMASK           MCF_REG08(0xFC04801F)
+#define MCF_INTC0_ICR0             MCF_REG08(0xFC048040)
+#define MCF_INTC0_ICR1             MCF_REG08(0xFC048041)
+#define MCF_INTC0_ICR2             MCF_REG08(0xFC048042)
+#define MCF_INTC0_ICR3             MCF_REG08(0xFC048043)
+#define MCF_INTC0_ICR4             MCF_REG08(0xFC048044)
+#define MCF_INTC0_ICR5             MCF_REG08(0xFC048045)
+#define MCF_INTC0_ICR6             MCF_REG08(0xFC048046)
+#define MCF_INTC0_ICR7             MCF_REG08(0xFC048047)
+#define MCF_INTC0_ICR8             MCF_REG08(0xFC048048)
+#define MCF_INTC0_ICR9             MCF_REG08(0xFC048049)
+#define MCF_INTC0_ICR10            MCF_REG08(0xFC04804A)
+#define MCF_INTC0_ICR11            MCF_REG08(0xFC04804B)
+#define MCF_INTC0_ICR12            MCF_REG08(0xFC04804C)
+#define MCF_INTC0_ICR13            MCF_REG08(0xFC04804D)
+#define MCF_INTC0_ICR14            MCF_REG08(0xFC04804E)
+#define MCF_INTC0_ICR15            MCF_REG08(0xFC04804F)
+#define MCF_INTC0_ICR16            MCF_REG08(0xFC048050)
+#define MCF_INTC0_ICR17            MCF_REG08(0xFC048051)
+#define MCF_INTC0_ICR18            MCF_REG08(0xFC048052)
+#define MCF_INTC0_ICR19            MCF_REG08(0xFC048053)
+#define MCF_INTC0_ICR20            MCF_REG08(0xFC048054)
+#define MCF_INTC0_ICR21            MCF_REG08(0xFC048055)
+#define MCF_INTC0_ICR22            MCF_REG08(0xFC048056)
+#define MCF_INTC0_ICR23            MCF_REG08(0xFC048057)
+#define MCF_INTC0_ICR24            MCF_REG08(0xFC048058)
+#define MCF_INTC0_ICR25            MCF_REG08(0xFC048059)
+#define MCF_INTC0_ICR26            MCF_REG08(0xFC04805A)
+#define MCF_INTC0_ICR27            MCF_REG08(0xFC04805B)
+#define MCF_INTC0_ICR28            MCF_REG08(0xFC04805C)
+#define MCF_INTC0_ICR29            MCF_REG08(0xFC04805D)
+#define MCF_INTC0_ICR30            MCF_REG08(0xFC04805E)
+#define MCF_INTC0_ICR31            MCF_REG08(0xFC04805F)
+#define MCF_INTC0_ICR32            MCF_REG08(0xFC048060)
+#define MCF_INTC0_ICR33            MCF_REG08(0xFC048061)
+#define MCF_INTC0_ICR34            MCF_REG08(0xFC048062)
+#define MCF_INTC0_ICR35            MCF_REG08(0xFC048063)
+#define MCF_INTC0_ICR36            MCF_REG08(0xFC048064)
+#define MCF_INTC0_ICR37            MCF_REG08(0xFC048065)
+#define MCF_INTC0_ICR38            MCF_REG08(0xFC048066)
+#define MCF_INTC0_ICR39            MCF_REG08(0xFC048067)
+#define MCF_INTC0_ICR40            MCF_REG08(0xFC048068)
+#define MCF_INTC0_ICR41            MCF_REG08(0xFC048069)
+#define MCF_INTC0_ICR42            MCF_REG08(0xFC04806A)
+#define MCF_INTC0_ICR43            MCF_REG08(0xFC04806B)
+#define MCF_INTC0_ICR44            MCF_REG08(0xFC04806C)
+#define MCF_INTC0_ICR45            MCF_REG08(0xFC04806D)
+#define MCF_INTC0_ICR46            MCF_REG08(0xFC04806E)
+#define MCF_INTC0_ICR47            MCF_REG08(0xFC04806F)
+#define MCF_INTC0_ICR48            MCF_REG08(0xFC048070)
+#define MCF_INTC0_ICR49            MCF_REG08(0xFC048071)
+#define MCF_INTC0_ICR50            MCF_REG08(0xFC048072)
+#define MCF_INTC0_ICR51            MCF_REG08(0xFC048073)
+#define MCF_INTC0_ICR52            MCF_REG08(0xFC048074)
+#define MCF_INTC0_ICR53            MCF_REG08(0xFC048075)
+#define MCF_INTC0_ICR54            MCF_REG08(0xFC048076)
+#define MCF_INTC0_ICR55            MCF_REG08(0xFC048077)
+#define MCF_INTC0_ICR56            MCF_REG08(0xFC048078)
+#define MCF_INTC0_ICR57            MCF_REG08(0xFC048079)
+#define MCF_INTC0_ICR58            MCF_REG08(0xFC04807A)
+#define MCF_INTC0_ICR59            MCF_REG08(0xFC04807B)
+#define MCF_INTC0_ICR60            MCF_REG08(0xFC04807C)
+#define MCF_INTC0_ICR61            MCF_REG08(0xFC04807D)
+#define MCF_INTC0_ICR62            MCF_REG08(0xFC04807E)
+#define MCF_INTC0_ICR63            MCF_REG08(0xFC04807F)
+#define MCF_INTC0_ICR(x)           MCF_REG08(0xFC048040+((x)*0x001))
+#define MCF_INTC0_SWIACK           MCF_REG08(0xFC0480E0)
+#define MCF_INTC0_L1IACK           MCF_REG08(0xFC0480E4)
+#define MCF_INTC0_L2IACK           MCF_REG08(0xFC0480E8)
+#define MCF_INTC0_L3IACK           MCF_REG08(0xFC0480EC)
+#define MCF_INTC0_L4IACK           MCF_REG08(0xFC0480F0)
+#define MCF_INTC0_L5IACK           MCF_REG08(0xFC0480F4)
+#define MCF_INTC0_L6IACK           MCF_REG08(0xFC0480F8)
+#define MCF_INTC0_L7IACK           MCF_REG08(0xFC0480FC)
+#define MCF_INTC0_LIACK(x)         MCF_REG08(0xFC0480E4+((x)*0x004))
+#define MCF_INTC1_IPRH             MCF_REG32(0xFC04C000)
+#define MCF_INTC1_IPRL             MCF_REG32(0xFC04C004)
+#define MCF_INTC1_IMRH             MCF_REG32(0xFC04C008)
+#define MCF_INTC1_IMRL             MCF_REG32(0xFC04C00C)
+#define MCF_INTC1_INTFRCH          MCF_REG32(0xFC04C010)
+#define MCF_INTC1_INTFRCL          MCF_REG32(0xFC04C014)
+#define MCF_INTC1_ICONFIG          MCF_REG16(0xFC04C01A)
+#define MCF_INTC1_SIMR             MCF_REG08(0xFC04C01C)
+#define MCF_INTC1_CIMR             MCF_REG08(0xFC04C01D)
+#define MCF_INTC1_CLMASK           MCF_REG08(0xFC04C01E)
+#define MCF_INTC1_SLMASK           MCF_REG08(0xFC04C01F)
+#define MCF_INTC1_ICR0             MCF_REG08(0xFC04C040)
+#define MCF_INTC1_ICR1             MCF_REG08(0xFC04C041)
+#define MCF_INTC1_ICR2             MCF_REG08(0xFC04C042)
+#define MCF_INTC1_ICR3             MCF_REG08(0xFC04C043)
+#define MCF_INTC1_ICR4             MCF_REG08(0xFC04C044)
+#define MCF_INTC1_ICR5             MCF_REG08(0xFC04C045)
+#define MCF_INTC1_ICR6             MCF_REG08(0xFC04C046)
+#define MCF_INTC1_ICR7             MCF_REG08(0xFC04C047)
+#define MCF_INTC1_ICR8             MCF_REG08(0xFC04C048)
+#define MCF_INTC1_ICR9             MCF_REG08(0xFC04C049)
+#define MCF_INTC1_ICR10            MCF_REG08(0xFC04C04A)
+#define MCF_INTC1_ICR11            MCF_REG08(0xFC04C04B)
+#define MCF_INTC1_ICR12            MCF_REG08(0xFC04C04C)
+#define MCF_INTC1_ICR13            MCF_REG08(0xFC04C04D)
+#define MCF_INTC1_ICR14            MCF_REG08(0xFC04C04E)
+#define MCF_INTC1_ICR15            MCF_REG08(0xFC04C04F)
+#define MCF_INTC1_ICR16            MCF_REG08(0xFC04C050)
+#define MCF_INTC1_ICR17            MCF_REG08(0xFC04C051)
+#define MCF_INTC1_ICR18            MCF_REG08(0xFC04C052)
+#define MCF_INTC1_ICR19            MCF_REG08(0xFC04C053)
+#define MCF_INTC1_ICR20            MCF_REG08(0xFC04C054)
+#define MCF_INTC1_ICR21            MCF_REG08(0xFC04C055)
+#define MCF_INTC1_ICR22            MCF_REG08(0xFC04C056)
+#define MCF_INTC1_ICR23            MCF_REG08(0xFC04C057)
+#define MCF_INTC1_ICR24            MCF_REG08(0xFC04C058)
+#define MCF_INTC1_ICR25            MCF_REG08(0xFC04C059)
+#define MCF_INTC1_ICR26            MCF_REG08(0xFC04C05A)
+#define MCF_INTC1_ICR27            MCF_REG08(0xFC04C05B)
+#define MCF_INTC1_ICR28            MCF_REG08(0xFC04C05C)
+#define MCF_INTC1_ICR29            MCF_REG08(0xFC04C05D)
+#define MCF_INTC1_ICR30            MCF_REG08(0xFC04C05E)
+#define MCF_INTC1_ICR31            MCF_REG08(0xFC04C05F)
+#define MCF_INTC1_ICR32            MCF_REG08(0xFC04C060)
+#define MCF_INTC1_ICR33            MCF_REG08(0xFC04C061)
+#define MCF_INTC1_ICR34            MCF_REG08(0xFC04C062)
+#define MCF_INTC1_ICR35            MCF_REG08(0xFC04C063)
+#define MCF_INTC1_ICR36            MCF_REG08(0xFC04C064)
+#define MCF_INTC1_ICR37            MCF_REG08(0xFC04C065)
+#define MCF_INTC1_ICR38            MCF_REG08(0xFC04C066)
+#define MCF_INTC1_ICR39            MCF_REG08(0xFC04C067)
+#define MCF_INTC1_ICR40            MCF_REG08(0xFC04C068)
+#define MCF_INTC1_ICR41            MCF_REG08(0xFC04C069)
+#define MCF_INTC1_ICR42            MCF_REG08(0xFC04C06A)
+#define MCF_INTC1_ICR43            MCF_REG08(0xFC04C06B)
+#define MCF_INTC1_ICR44            MCF_REG08(0xFC04C06C)
+#define MCF_INTC1_ICR45            MCF_REG08(0xFC04C06D)
+#define MCF_INTC1_ICR46            MCF_REG08(0xFC04C06E)
+#define MCF_INTC1_ICR47            MCF_REG08(0xFC04C06F)
+#define MCF_INTC1_ICR48            MCF_REG08(0xFC04C070)
+#define MCF_INTC1_ICR49            MCF_REG08(0xFC04C071)
+#define MCF_INTC1_ICR50            MCF_REG08(0xFC04C072)
+#define MCF_INTC1_ICR51            MCF_REG08(0xFC04C073)
+#define MCF_INTC1_ICR52            MCF_REG08(0xFC04C074)
+#define MCF_INTC1_ICR53            MCF_REG08(0xFC04C075)
+#define MCF_INTC1_ICR54            MCF_REG08(0xFC04C076)
+#define MCF_INTC1_ICR55            MCF_REG08(0xFC04C077)
+#define MCF_INTC1_ICR56            MCF_REG08(0xFC04C078)
+#define MCF_INTC1_ICR57            MCF_REG08(0xFC04C079)
+#define MCF_INTC1_ICR58            MCF_REG08(0xFC04C07A)
+#define MCF_INTC1_ICR59            MCF_REG08(0xFC04C07B)
+#define MCF_INTC1_ICR60            MCF_REG08(0xFC04C07C)
+#define MCF_INTC1_ICR61            MCF_REG08(0xFC04C07D)
+#define MCF_INTC1_ICR62            MCF_REG08(0xFC04C07E)
+#define MCF_INTC1_ICR63            MCF_REG08(0xFC04C07F)
+#define MCF_INTC1_ICR(x)           MCF_REG08(0xFC04C040+((x)*0x001))
+#define MCF_INTC1_SWIACK           MCF_REG08(0xFC04C0E0)
+#define MCF_INTC1_L1IACK           MCF_REG08(0xFC04C0E4)
+#define MCF_INTC1_L2IACK           MCF_REG08(0xFC04C0E8)
+#define MCF_INTC1_L3IACK           MCF_REG08(0xFC04C0EC)
+#define MCF_INTC1_L4IACK           MCF_REG08(0xFC04C0F0)
+#define MCF_INTC1_L5IACK           MCF_REG08(0xFC04C0F4)
+#define MCF_INTC1_L6IACK           MCF_REG08(0xFC04C0F8)
+#define MCF_INTC1_L7IACK           MCF_REG08(0xFC04C0FC)
+#define MCF_INTC1_LIACK(x)         MCF_REG08(0xFC04C0E4+((x)*0x004))
+#define MCF_INTC_IPRH(x)           MCF_REG32(0xFC048000+((x)*0x4000))
+#define MCF_INTC_IPRL(x)           MCF_REG32(0xFC048004+((x)*0x4000))
+#define MCF_INTC_IMRH(x)           MCF_REG32(0xFC048008+((x)*0x4000))
+#define MCF_INTC_IMRL(x)           MCF_REG32(0xFC04800C+((x)*0x4000))
+#define MCF_INTC_INTFRCH(x)        MCF_REG32(0xFC048010+((x)*0x4000))
+#define MCF_INTC_INTFRCL(x)        MCF_REG32(0xFC048014+((x)*0x4000))
+#define MCF_INTC_ICONFIG(x)        MCF_REG16(0xFC04801A+((x)*0x4000))
+#define MCF_INTC_SIMR(x)           MCF_REG08(0xFC04801C+((x)*0x4000))
+#define MCF_INTC_CIMR(x)           MCF_REG08(0xFC04801D+((x)*0x4000))
+#define MCF_INTC_CLMASK(x)         MCF_REG08(0xFC04801E+((x)*0x4000))
+#define MCF_INTC_SLMASK(x)         MCF_REG08(0xFC04801F+((x)*0x4000))
+#define MCF_INTC_ICR0(x)           MCF_REG08(0xFC048040+((x)*0x4000))
+#define MCF_INTC_ICR1(x)           MCF_REG08(0xFC048041+((x)*0x4000))
+#define MCF_INTC_ICR2(x)           MCF_REG08(0xFC048042+((x)*0x4000))
+#define MCF_INTC_ICR3(x)           MCF_REG08(0xFC048043+((x)*0x4000))
+#define MCF_INTC_ICR4(x)           MCF_REG08(0xFC048044+((x)*0x4000))
+#define MCF_INTC_ICR5(x)           MCF_REG08(0xFC048045+((x)*0x4000))
+#define MCF_INTC_ICR6(x)           MCF_REG08(0xFC048046+((x)*0x4000))
+#define MCF_INTC_ICR7(x)           MCF_REG08(0xFC048047+((x)*0x4000))
+#define MCF_INTC_ICR8(x)           MCF_REG08(0xFC048048+((x)*0x4000))
+#define MCF_INTC_ICR9(x)           MCF_REG08(0xFC048049+((x)*0x4000))
+#define MCF_INTC_ICR10(x)          MCF_REG08(0xFC04804A+((x)*0x4000))
+#define MCF_INTC_ICR11(x)          MCF_REG08(0xFC04804B+((x)*0x4000))
+#define MCF_INTC_ICR12(x)          MCF_REG08(0xFC04804C+((x)*0x4000))
+#define MCF_INTC_ICR13(x)          MCF_REG08(0xFC04804D+((x)*0x4000))
+#define MCF_INTC_ICR14(x)          MCF_REG08(0xFC04804E+((x)*0x4000))
+#define MCF_INTC_ICR15(x)          MCF_REG08(0xFC04804F+((x)*0x4000))
+#define MCF_INTC_ICR16(x)          MCF_REG08(0xFC048050+((x)*0x4000))
+#define MCF_INTC_ICR17(x)          MCF_REG08(0xFC048051+((x)*0x4000))
+#define MCF_INTC_ICR18(x)          MCF_REG08(0xFC048052+((x)*0x4000))
+#define MCF_INTC_ICR19(x)          MCF_REG08(0xFC048053+((x)*0x4000))
+#define MCF_INTC_ICR20(x)          MCF_REG08(0xFC048054+((x)*0x4000))
+#define MCF_INTC_ICR21(x)          MCF_REG08(0xFC048055+((x)*0x4000))
+#define MCF_INTC_ICR22(x)          MCF_REG08(0xFC048056+((x)*0x4000))
+#define MCF_INTC_ICR23(x)          MCF_REG08(0xFC048057+((x)*0x4000))
+#define MCF_INTC_ICR24(x)          MCF_REG08(0xFC048058+((x)*0x4000))
+#define MCF_INTC_ICR25(x)          MCF_REG08(0xFC048059+((x)*0x4000))
+#define MCF_INTC_ICR26(x)          MCF_REG08(0xFC04805A+((x)*0x4000))
+#define MCF_INTC_ICR27(x)          MCF_REG08(0xFC04805B+((x)*0x4000))
+#define MCF_INTC_ICR28(x)          MCF_REG08(0xFC04805C+((x)*0x4000))
+#define MCF_INTC_ICR29(x)          MCF_REG08(0xFC04805D+((x)*0x4000))
+#define MCF_INTC_ICR30(x)          MCF_REG08(0xFC04805E+((x)*0x4000))
+#define MCF_INTC_ICR31(x)          MCF_REG08(0xFC04805F+((x)*0x4000))
+#define MCF_INTC_ICR32(x)          MCF_REG08(0xFC048060+((x)*0x4000))
+#define MCF_INTC_ICR33(x)          MCF_REG08(0xFC048061+((x)*0x4000))
+#define MCF_INTC_ICR34(x)          MCF_REG08(0xFC048062+((x)*0x4000))
+#define MCF_INTC_ICR35(x)          MCF_REG08(0xFC048063+((x)*0x4000))
+#define MCF_INTC_ICR36(x)          MCF_REG08(0xFC048064+((x)*0x4000))
+#define MCF_INTC_ICR37(x)          MCF_REG08(0xFC048065+((x)*0x4000))
+#define MCF_INTC_ICR38(x)          MCF_REG08(0xFC048066+((x)*0x4000))
+#define MCF_INTC_ICR39(x)          MCF_REG08(0xFC048067+((x)*0x4000))
+#define MCF_INTC_ICR40(x)          MCF_REG08(0xFC048068+((x)*0x4000))
+#define MCF_INTC_ICR41(x)          MCF_REG08(0xFC048069+((x)*0x4000))
+#define MCF_INTC_ICR42(x)          MCF_REG08(0xFC04806A+((x)*0x4000))
+#define MCF_INTC_ICR43(x)          MCF_REG08(0xFC04806B+((x)*0x4000))
+#define MCF_INTC_ICR44(x)          MCF_REG08(0xFC04806C+((x)*0x4000))
+#define MCF_INTC_ICR45(x)          MCF_REG08(0xFC04806D+((x)*0x4000))
+#define MCF_INTC_ICR46(x)          MCF_REG08(0xFC04806E+((x)*0x4000))
+#define MCF_INTC_ICR47(x)          MCF_REG08(0xFC04806F+((x)*0x4000))
+#define MCF_INTC_ICR48(x)          MCF_REG08(0xFC048070+((x)*0x4000))
+#define MCF_INTC_ICR49(x)          MCF_REG08(0xFC048071+((x)*0x4000))
+#define MCF_INTC_ICR50(x)          MCF_REG08(0xFC048072+((x)*0x4000))
+#define MCF_INTC_ICR51(x)          MCF_REG08(0xFC048073+((x)*0x4000))
+#define MCF_INTC_ICR52(x)          MCF_REG08(0xFC048074+((x)*0x4000))
+#define MCF_INTC_ICR53(x)          MCF_REG08(0xFC048075+((x)*0x4000))
+#define MCF_INTC_ICR54(x)          MCF_REG08(0xFC048076+((x)*0x4000))
+#define MCF_INTC_ICR55(x)          MCF_REG08(0xFC048077+((x)*0x4000))
+#define MCF_INTC_ICR56(x)          MCF_REG08(0xFC048078+((x)*0x4000))
+#define MCF_INTC_ICR57(x)          MCF_REG08(0xFC048079+((x)*0x4000))
+#define MCF_INTC_ICR58(x)          MCF_REG08(0xFC04807A+((x)*0x4000))
+#define MCF_INTC_ICR59(x)          MCF_REG08(0xFC04807B+((x)*0x4000))
+#define MCF_INTC_ICR60(x)          MCF_REG08(0xFC04807C+((x)*0x4000))
+#define MCF_INTC_ICR61(x)          MCF_REG08(0xFC04807D+((x)*0x4000))
+#define MCF_INTC_ICR62(x)          MCF_REG08(0xFC04807E+((x)*0x4000))
+#define MCF_INTC_ICR63(x)          MCF_REG08(0xFC04807F+((x)*0x4000))
+#define MCF_INTC_SWIACK(x)         MCF_REG08(0xFC0480E0+((x)*0x4000))
+#define MCF_INTC_L1IACK(x)         MCF_REG08(0xFC0480E4+((x)*0x4000))
+#define MCF_INTC_L2IACK(x)         MCF_REG08(0xFC0480E8+((x)*0x4000))
+#define MCF_INTC_L3IACK(x)         MCF_REG08(0xFC0480EC+((x)*0x4000))
+#define MCF_INTC_L4IACK(x)         MCF_REG08(0xFC0480F0+((x)*0x4000))
+#define MCF_INTC_L5IACK(x)         MCF_REG08(0xFC0480F4+((x)*0x4000))
+#define MCF_INTC_L6IACK(x)         MCF_REG08(0xFC0480F8+((x)*0x4000))
+#define MCF_INTC_L7IACK(x)         MCF_REG08(0xFC0480FC+((x)*0x4000))
+
+/* Bit definitions and macros for MCF_INTC_IPRH */
+#define MCF_INTC_IPRH_INT32        (0x00000001)
+#define MCF_INTC_IPRH_INT33        (0x00000002)
+#define MCF_INTC_IPRH_INT34        (0x00000004)
+#define MCF_INTC_IPRH_INT35        (0x00000008)
+#define MCF_INTC_IPRH_INT36        (0x00000010)
+#define MCF_INTC_IPRH_INT37        (0x00000020)
+#define MCF_INTC_IPRH_INT38        (0x00000040)
+#define MCF_INTC_IPRH_INT39        (0x00000080)
+#define MCF_INTC_IPRH_INT40        (0x00000100)
+#define MCF_INTC_IPRH_INT41        (0x00000200)
+#define MCF_INTC_IPRH_INT42        (0x00000400)
+#define MCF_INTC_IPRH_INT43        (0x00000800)
+#define MCF_INTC_IPRH_INT44        (0x00001000)
+#define MCF_INTC_IPRH_INT45        (0x00002000)
+#define MCF_INTC_IPRH_INT46        (0x00004000)
+#define MCF_INTC_IPRH_INT47        (0x00008000)
+#define MCF_INTC_IPRH_INT48        (0x00010000)
+#define MCF_INTC_IPRH_INT49        (0x00020000)
+#define MCF_INTC_IPRH_INT50        (0x00040000)
+#define MCF_INTC_IPRH_INT51        (0x00080000)
+#define MCF_INTC_IPRH_INT52        (0x00100000)
+#define MCF_INTC_IPRH_INT53        (0x00200000)
+#define MCF_INTC_IPRH_INT54        (0x00400000)
+#define MCF_INTC_IPRH_INT55        (0x00800000)
+#define MCF_INTC_IPRH_INT56        (0x01000000)
+#define MCF_INTC_IPRH_INT57        (0x02000000)
+#define MCF_INTC_IPRH_INT58        (0x04000000)
+#define MCF_INTC_IPRH_INT59        (0x08000000)
+#define MCF_INTC_IPRH_INT60        (0x10000000)
+#define MCF_INTC_IPRH_INT61        (0x20000000)
+#define MCF_INTC_IPRH_INT62        (0x40000000)
+#define MCF_INTC_IPRH_INT63        (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IPRL */
+#define MCF_INTC_IPRL_INT0         (0x00000001)
+#define MCF_INTC_IPRL_INT1         (0x00000002)
+#define MCF_INTC_IPRL_INT2         (0x00000004)
+#define MCF_INTC_IPRL_INT3         (0x00000008)
+#define MCF_INTC_IPRL_INT4         (0x00000010)
+#define MCF_INTC_IPRL_INT5         (0x00000020)
+#define MCF_INTC_IPRL_INT6         (0x00000040)
+#define MCF_INTC_IPRL_INT7         (0x00000080)
+#define MCF_INTC_IPRL_INT8         (0x00000100)
+#define MCF_INTC_IPRL_INT9         (0x00000200)
+#define MCF_INTC_IPRL_INT10        (0x00000400)
+#define MCF_INTC_IPRL_INT11        (0x00000800)
+#define MCF_INTC_IPRL_INT12        (0x00001000)
+#define MCF_INTC_IPRL_INT13        (0x00002000)
+#define MCF_INTC_IPRL_INT14        (0x00004000)
+#define MCF_INTC_IPRL_INT15        (0x00008000)
+#define MCF_INTC_IPRL_INT16        (0x00010000)
+#define MCF_INTC_IPRL_INT17        (0x00020000)
+#define MCF_INTC_IPRL_INT18        (0x00040000)
+#define MCF_INTC_IPRL_INT19        (0x00080000)
+#define MCF_INTC_IPRL_INT20        (0x00100000)
+#define MCF_INTC_IPRL_INT21        (0x00200000)
+#define MCF_INTC_IPRL_INT22        (0x00400000)
+#define MCF_INTC_IPRL_INT23        (0x00800000)
+#define MCF_INTC_IPRL_INT24        (0x01000000)
+#define MCF_INTC_IPRL_INT25        (0x02000000)
+#define MCF_INTC_IPRL_INT26        (0x04000000)
+#define MCF_INTC_IPRL_INT27        (0x08000000)
+#define MCF_INTC_IPRL_INT28        (0x10000000)
+#define MCF_INTC_IPRL_INT29        (0x20000000)
+#define MCF_INTC_IPRL_INT30        (0x40000000)
+#define MCF_INTC_IPRL_INT31        (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRH */
+#define MCF_INTC_IMRH_INT_MASK32   (0x00000001)
+#define MCF_INTC_IMRH_INT_MASK33   (0x00000002)
+#define MCF_INTC_IMRH_INT_MASK34   (0x00000004)
+#define MCF_INTC_IMRH_INT_MASK35   (0x00000008)
+#define MCF_INTC_IMRH_INT_MASK36   (0x00000010)
+#define MCF_INTC_IMRH_INT_MASK37   (0x00000020)
+#define MCF_INTC_IMRH_INT_MASK38   (0x00000040)
+#define MCF_INTC_IMRH_INT_MASK39   (0x00000080)
+#define MCF_INTC_IMRH_INT_MASK40   (0x00000100)
+#define MCF_INTC_IMRH_INT_MASK41   (0x00000200)
+#define MCF_INTC_IMRH_INT_MASK42   (0x00000400)
+#define MCF_INTC_IMRH_INT_MASK43   (0x00000800)
+#define MCF_INTC_IMRH_INT_MASK44   (0x00001000)
+#define MCF_INTC_IMRH_INT_MASK45   (0x00002000)
+#define MCF_INTC_IMRH_INT_MASK46   (0x00004000)
+#define MCF_INTC_IMRH_INT_MASK47   (0x00008000)
+#define MCF_INTC_IMRH_INT_MASK48   (0x00010000)
+#define MCF_INTC_IMRH_INT_MASK49   (0x00020000)
+#define MCF_INTC_IMRH_INT_MASK50   (0x00040000)
+#define MCF_INTC_IMRH_INT_MASK51   (0x00080000)
+#define MCF_INTC_IMRH_INT_MASK52   (0x00100000)
+#define MCF_INTC_IMRH_INT_MASK53   (0x00200000)
+#define MCF_INTC_IMRH_INT_MASK54   (0x00400000)
+#define MCF_INTC_IMRH_INT_MASK55   (0x00800000)
+#define MCF_INTC_IMRH_INT_MASK56   (0x01000000)
+#define MCF_INTC_IMRH_INT_MASK57   (0x02000000)
+#define MCF_INTC_IMRH_INT_MASK58   (0x04000000)
+#define MCF_INTC_IMRH_INT_MASK59   (0x08000000)
+#define MCF_INTC_IMRH_INT_MASK60   (0x10000000)
+#define MCF_INTC_IMRH_INT_MASK61   (0x20000000)
+#define MCF_INTC_IMRH_INT_MASK62   (0x40000000)
+#define MCF_INTC_IMRH_INT_MASK63   (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_IMRL */
+#define MCF_INTC_IMRL_INT_MASK0    (0x00000001)
+#define MCF_INTC_IMRL_INT_MASK1    (0x00000002)
+#define MCF_INTC_IMRL_INT_MASK2    (0x00000004)
+#define MCF_INTC_IMRL_INT_MASK3    (0x00000008)
+#define MCF_INTC_IMRL_INT_MASK4    (0x00000010)
+#define MCF_INTC_IMRL_INT_MASK5    (0x00000020)
+#define MCF_INTC_IMRL_INT_MASK6    (0x00000040)
+#define MCF_INTC_IMRL_INT_MASK7    (0x00000080)
+#define MCF_INTC_IMRL_INT_MASK8    (0x00000100)
+#define MCF_INTC_IMRL_INT_MASK9    (0x00000200)
+#define MCF_INTC_IMRL_INT_MASK10   (0x00000400)
+#define MCF_INTC_IMRL_INT_MASK11   (0x00000800)
+#define MCF_INTC_IMRL_INT_MASK12   (0x00001000)
+#define MCF_INTC_IMRL_INT_MASK13   (0x00002000)
+#define MCF_INTC_IMRL_INT_MASK14   (0x00004000)
+#define MCF_INTC_IMRL_INT_MASK15   (0x00008000)
+#define MCF_INTC_IMRL_INT_MASK16   (0x00010000)
+#define MCF_INTC_IMRL_INT_MASK17   (0x00020000)
+#define MCF_INTC_IMRL_INT_MASK18   (0x00040000)
+#define MCF_INTC_IMRL_INT_MASK19   (0x00080000)
+#define MCF_INTC_IMRL_INT_MASK20   (0x00100000)
+#define MCF_INTC_IMRL_INT_MASK21   (0x00200000)
+#define MCF_INTC_IMRL_INT_MASK22   (0x00400000)
+#define MCF_INTC_IMRL_INT_MASK23   (0x00800000)
+#define MCF_INTC_IMRL_INT_MASK24   (0x01000000)
+#define MCF_INTC_IMRL_INT_MASK25   (0x02000000)
+#define MCF_INTC_IMRL_INT_MASK26   (0x04000000)
+#define MCF_INTC_IMRL_INT_MASK27   (0x08000000)
+#define MCF_INTC_IMRL_INT_MASK28   (0x10000000)
+#define MCF_INTC_IMRL_INT_MASK29   (0x20000000)
+#define MCF_INTC_IMRL_INT_MASK30   (0x40000000)
+#define MCF_INTC_IMRL_INT_MASK31   (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCH */
+#define MCF_INTC_INTFRCH_INTFRC32  (0x00000001)
+#define MCF_INTC_INTFRCH_INTFRC33  (0x00000002)
+#define MCF_INTC_INTFRCH_INTFRC34  (0x00000004)
+#define MCF_INTC_INTFRCH_INTFRC35  (0x00000008)
+#define MCF_INTC_INTFRCH_INTFRC36  (0x00000010)
+#define MCF_INTC_INTFRCH_INTFRC37  (0x00000020)
+#define MCF_INTC_INTFRCH_INTFRC38  (0x00000040)
+#define MCF_INTC_INTFRCH_INTFRC39  (0x00000080)
+#define MCF_INTC_INTFRCH_INTFRC40  (0x00000100)
+#define MCF_INTC_INTFRCH_INTFRC41  (0x00000200)
+#define MCF_INTC_INTFRCH_INTFRC42  (0x00000400)
+#define MCF_INTC_INTFRCH_INTFRC43  (0x00000800)
+#define MCF_INTC_INTFRCH_INTFRC44  (0x00001000)
+#define MCF_INTC_INTFRCH_INTFRC45  (0x00002000)
+#define MCF_INTC_INTFRCH_INTFRC46  (0x00004000)
+#define MCF_INTC_INTFRCH_INTFRC47  (0x00008000)
+#define MCF_INTC_INTFRCH_INTFRC48  (0x00010000)
+#define MCF_INTC_INTFRCH_INTFRC49  (0x00020000)
+#define MCF_INTC_INTFRCH_INTFRC50  (0x00040000)
+#define MCF_INTC_INTFRCH_INTFRC51  (0x00080000)
+#define MCF_INTC_INTFRCH_INTFRC52  (0x00100000)
+#define MCF_INTC_INTFRCH_INTFRC53  (0x00200000)
+#define MCF_INTC_INTFRCH_INTFRC54  (0x00400000)
+#define MCF_INTC_INTFRCH_INTFRC55  (0x00800000)
+#define MCF_INTC_INTFRCH_INTFRC56  (0x01000000)
+#define MCF_INTC_INTFRCH_INTFRC57  (0x02000000)
+#define MCF_INTC_INTFRCH_INTFRC58  (0x04000000)
+#define MCF_INTC_INTFRCH_INTFRC59  (0x08000000)
+#define MCF_INTC_INTFRCH_INTFRC60  (0x10000000)
+#define MCF_INTC_INTFRCH_INTFRC61  (0x20000000)
+#define MCF_INTC_INTFRCH_INTFRC62  (0x40000000)
+#define MCF_INTC_INTFRCH_INTFRC63  (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_INTFRCL */
+#define MCF_INTC_INTFRCL_INTFRC0   (0x00000001)
+#define MCF_INTC_INTFRCL_INTFRC1   (0x00000002)
+#define MCF_INTC_INTFRCL_INTFRC2   (0x00000004)
+#define MCF_INTC_INTFRCL_INTFRC3   (0x00000008)
+#define MCF_INTC_INTFRCL_INTFRC4   (0x00000010)
+#define MCF_INTC_INTFRCL_INTFRC5   (0x00000020)
+#define MCF_INTC_INTFRCL_INTFRC6   (0x00000040)
+#define MCF_INTC_INTFRCL_INTFRC7   (0x00000080)
+#define MCF_INTC_INTFRCL_INTFRC8   (0x00000100)
+#define MCF_INTC_INTFRCL_INTFRC9   (0x00000200)
+#define MCF_INTC_INTFRCL_INTFRC10  (0x00000400)
+#define MCF_INTC_INTFRCL_INTFRC11  (0x00000800)
+#define MCF_INTC_INTFRCL_INTFRC12  (0x00001000)
+#define MCF_INTC_INTFRCL_INTFRC13  (0x00002000)
+#define MCF_INTC_INTFRCL_INTFRC14  (0x00004000)
+#define MCF_INTC_INTFRCL_INTFRC15  (0x00008000)
+#define MCF_INTC_INTFRCL_INTFRC16  (0x00010000)
+#define MCF_INTC_INTFRCL_INTFRC17  (0x00020000)
+#define MCF_INTC_INTFRCL_INTFRC18  (0x00040000)
+#define MCF_INTC_INTFRCL_INTFRC19  (0x00080000)
+#define MCF_INTC_INTFRCL_INTFRC20  (0x00100000)
+#define MCF_INTC_INTFRCL_INTFRC21  (0x00200000)
+#define MCF_INTC_INTFRCL_INTFRC22  (0x00400000)
+#define MCF_INTC_INTFRCL_INTFRC23  (0x00800000)
+#define MCF_INTC_INTFRCL_INTFRC24  (0x01000000)
+#define MCF_INTC_INTFRCL_INTFRC25  (0x02000000)
+#define MCF_INTC_INTFRCL_INTFRC26  (0x04000000)
+#define MCF_INTC_INTFRCL_INTFRC27  (0x08000000)
+#define MCF_INTC_INTFRCL_INTFRC28  (0x10000000)
+#define MCF_INTC_INTFRCL_INTFRC29  (0x20000000)
+#define MCF_INTC_INTFRCL_INTFRC30  (0x40000000)
+#define MCF_INTC_INTFRCL_INTFRC31  (0x80000000)
+
+/* Bit definitions and macros for MCF_INTC_ICONFIG */
+#define MCF_INTC_ICONFIG_EMASK     (0x0020)
+#define MCF_INTC_ICONFIG_ELVLPRI1  (0x0200)
+#define MCF_INTC_ICONFIG_ELVLPRI2  (0x0400)
+#define MCF_INTC_ICONFIG_ELVLPRI3  (0x0800)
+#define MCF_INTC_ICONFIG_ELVLPRI4  (0x1000)
+#define MCF_INTC_ICONFIG_ELVLPRI5  (0x2000)
+#define MCF_INTC_ICONFIG_ELVLPRI6  (0x4000)
+#define MCF_INTC_ICONFIG_ELVLPRI7  (0x8000)
+
+/* Bit definitions and macros for MCF_INTC_SIMR */
+#define MCF_INTC_SIMR_SIMR(x)      (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CIMR */
+#define MCF_INTC_CIMR_CIMR(x)      (((x)&0x7F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_CLMASK */
+#define MCF_INTC_CLMASK_CLMASK(x)  (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SLMASK */
+#define MCF_INTC_SLMASK_SLMASK(x)  (((x)&0x0F)<<0)
+
+/* Bit definitions and macros for MCF_INTC_ICR */
+#define MCF_INTC_ICR_IL(x)         (((x)&0x07)<<0)
+
+/* Bit definitions and macros for MCF_INTC_SWIACK */
+#define MCF_INTC_SWIACK_VECTOR(x)  (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_INTC_LIACK */
+#define MCF_INTC_LIACK_VECTOR(x)   (((x)&0xFF)<<0)
+
+/********************************************************************/
+/*********************************************************************
+*
+* LCD Controller (LCDC)
+*
+*********************************************************************/
+
+/* Register read/write macros */
+#define MCF_LCDC_LSSAR                  MCF_REG32(0xFC0AC000)
+#define MCF_LCDC_LSR                    MCF_REG32(0xFC0AC004)
+#define MCF_LCDC_LVPWR                  MCF_REG32(0xFC0AC008)
+#define MCF_LCDC_LCPR                   MCF_REG32(0xFC0AC00C)
+#define MCF_LCDC_LCWHBR                 MCF_REG32(0xFC0AC010)
+#define MCF_LCDC_LCCMR                  MCF_REG32(0xFC0AC014)
+#define MCF_LCDC_LPCR                   MCF_REG32(0xFC0AC018)
+#define MCF_LCDC_LHCR                   MCF_REG32(0xFC0AC01C)
+#define MCF_LCDC_LVCR                   MCF_REG32(0xFC0AC020)
+#define MCF_LCDC_LPOR                   MCF_REG32(0xFC0AC024)
+#define MCF_LCDC_LSCR                   MCF_REG32(0xFC0AC028)
+#define MCF_LCDC_LPCCR                  MCF_REG32(0xFC0AC02C)
+#define MCF_LCDC_LDCR                   MCF_REG32(0xFC0AC030)
+#define MCF_LCDC_LRMCR                  MCF_REG32(0xFC0AC034)
+#define MCF_LCDC_LICR                   MCF_REG32(0xFC0AC038)
+#define MCF_LCDC_LIER                   MCF_REG32(0xFC0AC03C)
+#define MCF_LCDC_LISR                   MCF_REG32(0xFC0AC040)
+#define MCF_LCDC_LGWSAR                 MCF_REG32(0xFC0AC050)
+#define MCF_LCDC_LGWSR                  MCF_REG32(0xFC0AC054)
+#define MCF_LCDC_LGWVPWR                MCF_REG32(0xFC0AC058)
+#define MCF_LCDC_LGWPOR                 MCF_REG32(0xFC0AC05C)
+#define MCF_LCDC_LGWPR                  MCF_REG32(0xFC0AC060)
+#define MCF_LCDC_LGWCR                  MCF_REG32(0xFC0AC064)
+#define MCF_LCDC_LGWDCR                 MCF_REG32(0xFC0AC068)
+#define MCF_LCDC_BPLUT_BASE             MCF_REG32(0xFC0AC800)
+#define MCF_LCDC_GWLUT_BASE             MCF_REG32(0xFC0ACC00)
+
+/* Bit definitions and macros for MCF_LCDC_LSSAR */
+#define MCF_LCDC_LSSAR_SSA(x)           (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LSR */
+#define MCF_LCDC_LSR_YMAX(x)            (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LSR_XMAX(x)            (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LVPWR */
+#define MCF_LCDC_LVPWR_VPW(x)           (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LCPR */
+#define MCF_LCDC_LCPR_CYP(x)            (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LCPR_CXP(x)            (((x)&0x000003FF)<<16)
+#define MCF_LCDC_LCPR_OP                (0x10000000)
+#define MCF_LCDC_LCPR_CC(x)             (((x)&0x00000003)<<30)
+#define MCF_LCDC_LCPR_CC_TRANSPARENT    (0x00000000)
+#define MCF_LCDC_LCPR_CC_OR             (0x40000000)
+#define MCF_LCDC_LCPR_CC_XOR            (0x80000000)
+#define MCF_LCDC_LCPR_CC_AND            (0xC0000000)
+#define MCF_LCDC_LCPR_OP_ON             (0x10000000)
+#define MCF_LCDC_LCPR_OP_OFF            (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCWHBR */
+#define MCF_LCDC_LCWHBR_BD(x)           (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LCWHBR_CH(x)           (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LCWHBR_CW(x)           (((x)&0x0000001F)<<24)
+#define MCF_LCDC_LCWHBR_BK_EN           (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_ON        (0x80000000)
+#define MCF_LCDC_LCWHBR_BK_EN_OFF       (0x00000000)
+
+/* Bit definitions and macros for MCF_LCDC_LCCMR */
+#define MCF_LCDC_LCCMR_CUR_COL_B(x)     (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LCCMR_CUR_COL_G(x)     (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LCCMR_CUR_COL_R(x)     (((x)&0x0000003F)<<12)
+
+/* Bit definitions and macros for MCF_LCDC_LPCR */
+#define MCF_LCDC_LPCR_PCD(x)            (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LPCR_SHARP             (0x00000040)
+#define MCF_LCDC_LPCR_SCLKSEL           (0x00000080)
+#define MCF_LCDC_LPCR_ACD(x)            (((x)&0x0000007F)<<8)
+#define MCF_LCDC_LPCR_ACDSEL            (0x00008000)
+#define MCF_LCDC_LPCR_REV_VS            (0x00010000)
+#define MCF_LCDC_LPCR_SWAP_SEL          (0x00020000)
+#define MCF_LCDC_LPCR_ENDSEL            (0x00040000)
+#define MCF_LCDC_LPCR_SCLKIDLE          (0x00080000)
+#define MCF_LCDC_LPCR_OEPOL             (0x00100000)
+#define MCF_LCDC_LPCR_CLKPOL            (0x00200000)
+#define MCF_LCDC_LPCR_LPPOL             (0x00400000)
+#define MCF_LCDC_LPCR_FLM               (0x00800000)
+#define MCF_LCDC_LPCR_PIXPOL            (0x01000000)
+#define MCF_LCDC_LPCR_BPIX(x)           (((x)&0x00000007)<<25)
+#define MCF_LCDC_LPCR_PBSIZ(x)          (((x)&0x00000003)<<28)
+#define MCF_LCDC_LPCR_COLOR             (0x40000000)
+#define MCF_LCDC_LPCR_TFT               (0x80000000)
+#define MCF_LCDC_LPCR_MODE_MONOCGROME   (0x00000000)
+#define MCF_LCDC_LPCR_MODE_CSTN         (0x40000000)
+#define MCF_LCDC_LPCR_MODE_TFT          (0xC0000000)
+#define MCF_LCDC_LPCR_PBSIZ_1           (0x00000000)
+#define MCF_LCDC_LPCR_PBSIZ_2           (0x10000000)
+#define MCF_LCDC_LPCR_PBSIZ_4           (0x20000000)
+#define MCF_LCDC_LPCR_PBSIZ_8           (0x30000000)
+#define MCF_LCDC_LPCR_BPIX_1bpp         (0x00000000)
+#define MCF_LCDC_LPCR_BPIX_2bpp         (0x02000000)
+#define MCF_LCDC_LPCR_BPIX_4bpp         (0x04000000)
+#define MCF_LCDC_LPCR_BPIX_8bpp         (0x06000000)
+#define MCF_LCDC_LPCR_BPIX_12bpp        (0x08000000)
+#define MCF_LCDC_LPCR_BPIX_16bpp        (0x0A000000)
+#define MCF_LCDC_LPCR_BPIX_18bpp        (0x0C000000)
+
+#define MCF_LCDC_LPCR_PANEL_TYPE(x)     (((x)&0x00000003)<<30) 
+
+/* Bit definitions and macros for MCF_LCDC_LHCR */
+#define MCF_LCDC_LHCR_H_WAIT_2(x)       (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LHCR_H_WAIT_1(x)       (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LHCR_H_WIDTH(x)        (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LVCR */
+#define MCF_LCDC_LVCR_V_WAIT_2(x)       (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LVCR_V_WAIT_1(x)       (((x)&0x000000FF)<<8)
+#define MCF_LCDC_LVCR_V_WIDTH(x)      (((x)&0x0000003F)<<26)
+
+/* Bit definitions and macros for MCF_LCDC_LPOR */
+#define MCF_LCDC_LPOR_POS(x)            (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LPCCR */
+#define MCF_LCDC_LPCCR_PW(x)            (((x)&0x000000FF)<<0)
+#define MCF_LCDC_LPCCR_CC_EN            (0x00000100)
+#define MCF_LCDC_LPCCR_SCR(x)           (((x)&0x00000003)<<9)
+#define MCF_LCDC_LPCCR_LDMSK            (0x00008000)
+#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x)  (((x)&0x000001FF)<<16)
+#define MCF_LCDC_LPCCR_SCR_LINEPULSE    (0x00000000)
+#define MCF_LCDC_LPCCR_SCR_PIXELCLK     (0x00002000)
+#define MCF_LCDC_LPCCR_SCR_LCDCLOCK     (0x00004000)
+
+/* Bit definitions and macros for MCF_LCDC_LDCR */
+#define MCF_LCDC_LDCR_TM(x)             (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LDCR_HM(x)             (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LDCR_BURST             (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LRMCR */
+#define MCF_LCDC_LRMCR_SEL_REF          (0x00000001)
+
+/* Bit definitions and macros for MCF_LCDC_LICR */
+#define MCF_LCDC_LICR_INTCON            (0x00000001)
+#define MCF_LCDC_LICR_INTSYN            (0x00000004)
+#define MCF_LCDC_LICR_GW_INT_CON        (0x00000010)
+
+/* Bit definitions and macros for MCF_LCDC_LIER */
+#define MCF_LCDC_LIER_BOF_EN            (0x00000001)
+#define MCF_LCDC_LIER_EOF_EN            (0x00000002)
+#define MCF_LCDC_LIER_ERR_RES_EN        (0x00000004)
+#define MCF_LCDC_LIER_UDR_ERR_EN        (0x00000008)
+#define MCF_LCDC_LIER_GW_BOF_EN         (0x00000010)
+#define MCF_LCDC_LIER_GW_EOF_EN         (0x00000020)
+#define MCF_LCDC_LIER_GW_ERR_RES_EN     (0x00000040)
+#define MCF_LCDC_LIER_GW_UDR_ERR_EN     (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LISR */
+#define MCF_LCDC_LISR_BOF               (0x00000001)
+#define MCF_LCDC_LISR_EOF               (0x00000002)
+#define MCF_LCDC_LISR_ERR_RES           (0x00000004)
+#define MCF_LCDC_LISR_UDR_ERR           (0x00000008)
+#define MCF_LCDC_LISR_GW_BOF            (0x00000010)
+#define MCF_LCDC_LISR_GW_EOF            (0x00000020)
+#define MCF_LCDC_LISR_GW_ERR_RES        (0x00000040)
+#define MCF_LCDC_LISR_GW_UDR_ERR        (0x00000080)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSAR */
+#define MCF_LCDC_LGWSAR_GWSA(x)         (((x)&0x3FFFFFFF)<<2)
+
+/* Bit definitions and macros for MCF_LCDC_LGWSR */
+#define MCF_LCDC_LGWSR_GWH(x)           (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWSR_GWW(x)           (((x)&0x0000003F)<<20)
+
+/* Bit definitions and macros for MCF_LCDC_LGWVPWR */
+#define MCF_LCDC_LGWVPWR_GWVPW(x)       (((x)&0x000003FF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPOR */
+#define MCF_LCDC_LGWPOR_GWPO(x)         (((x)&0x0000001F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_LGWPR */
+#define MCF_LCDC_LGWPR_GWYP(x)          (((x)&0x000003FF)<<0)
+#define MCF_LCDC_LGWPR_GWXP(x)          (((x)&0x000003FF)<<16)
+
+/* Bit definitions and macros for MCF_LCDC_LGWCR */
+#define MCF_LCDC_LGWCR_GWCKB(x)         (((x)&0x0000003F)<<0)
+#define MCF_LCDC_LGWCR_GWCKG(x)         (((x)&0x0000003F)<<6)
+#define MCF_LCDC_LGWCR_GWCKR(x)         (((x)&0x0000003F)<<12)
+#define MCF_LCDC_LGWCR_GW_RVS           (0x00200000)
+#define MCF_LCDC_LGWCR_GWE              (0x00400000)
+#define MCF_LCDC_LGWCR_GWCKE            (0x00800000)
+#define MCF_LCDC_LGWCR_GWAV(x)          (((x)&0x000000FF)<<24)
+
+/* Bit definitions and macros for MCF_LCDC_LGWDCR */
+#define MCF_LCDC_LGWDCR_GWTM(x)         (((x)&0x0000001F)<<0)
+#define MCF_LCDC_LGWDCR_GWHM(x)         (((x)&0x0000001F)<<16)
+#define MCF_LCDC_LGWDCR_GWBT            (0x80000000)
+
+/* Bit definitions and macros for MCF_LCDC_LSCR */
+#define MCF_LCDC_LSCR_PS_RISE_DELAY(x)    (((x)&0x0000003F)<<26)
+#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x)   (((x)&0x000000FF)<<16)
+#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8)
+#define MCF_LCDC_LSCR_GRAY_2(x)                   (((x)&0x0000000F)<<4)
+#define MCF_LCDC_LSCR_GRAY_1(x)                   (((x)&0x0000000F)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */
+#define MCF_LCDC_BPLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
+
+/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */
+#define MCF_LCDC_GWLUT_BASE_BASE(x)     (((x)&0xFFFFFFFF)<<0)
+
+/*********************************************************************
+ *
+ * Phase Locked Loop (PLL)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_PLL_PODR              MCF_REG08(0xFC0C0000)
+#define MCF_PLL_PLLCR             MCF_REG08(0xFC0C0004)
+#define MCF_PLL_PMDR              MCF_REG08(0xFC0C0008)
+#define MCF_PLL_PFDR              MCF_REG08(0xFC0C000C)
+
+/* Bit definitions and macros for MCF_PLL_PODR */
+#define MCF_PLL_PODR_BUSDIV(x)    (((x)&0x0F)<<0)
+#define MCF_PLL_PODR_CPUDIV(x)    (((x)&0x0F)<<4)
+
+/* Bit definitions and macros for MCF_PLL_PLLCR */
+#define MCF_PLL_PLLCR_DITHDEV(x)  (((x)&0x07)<<0)
+#define MCF_PLL_PLLCR_DITHEN      (0x80)
+
+/* Bit definitions and macros for MCF_PLL_PMDR */
+#define MCF_PLL_PMDR_MODDIV(x)    (((x)&0xFF)<<0)
+
+/* Bit definitions and macros for MCF_PLL_PFDR */
+#define MCF_PLL_PFDR_MFD(x)       (((x)&0xFF)<<0)
+
+/*********************************************************************
+ *
+ * System Control Module Registers (SCM)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SCM_MPR                     MCF_REG32(0xFC000000)
+#define MCF_SCM_PACRA                   MCF_REG32(0xFC000020)
+#define MCF_SCM_PACRB                   MCF_REG32(0xFC000024)
+#define MCF_SCM_PACRC                   MCF_REG32(0xFC000028)
+#define MCF_SCM_PACRD                   MCF_REG32(0xFC00002C)
+#define MCF_SCM_PACRE                   MCF_REG32(0xFC000040)
+#define MCF_SCM_PACRF                   MCF_REG32(0xFC000044)
+
+#define MCF_SCM_BCR                     MCF_REG32(0xFC040024)
+
+/*********************************************************************
+ *
+ * SDRAM Controller (SDRAMC)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_SDRAMC_SDMR                 MCF_REG32(0xFC0B8000)
+#define MCF_SDRAMC_SDCR                 MCF_REG32(0xFC0B8004)
+#define MCF_SDRAMC_SDCFG1               MCF_REG32(0xFC0B8008)
+#define MCF_SDRAMC_SDCFG2               MCF_REG32(0xFC0B800C)
+#define MCF_SDRAMC_LIMP_FIX             MCF_REG32(0xFC0B8080)
+#define MCF_SDRAMC_SDDS                 MCF_REG32(0xFC0B8100)
+#define MCF_SDRAMC_SDCS0                MCF_REG32(0xFC0B8110)
+#define MCF_SDRAMC_SDCS1                MCF_REG32(0xFC0B8114)
+#define MCF_SDRAMC_SDCS2                MCF_REG32(0xFC0B8118)
+#define MCF_SDRAMC_SDCS3                MCF_REG32(0xFC0B811C)
+#define MCF_SDRAMC_SDCS(x)              MCF_REG32(0xFC0B8110+((x)*0x004))
+
+/* Bit definitions and macros for MCF_SDRAMC_SDMR */
+#define MCF_SDRAMC_SDMR_CMD             (0x00010000)
+#define MCF_SDRAMC_SDMR_AD(x)           (((x)&0x00000FFF)<<18)
+#define MCF_SDRAMC_SDMR_BNKAD(x)        (((x)&0x00000003)<<30)
+#define MCF_SDRAMC_SDMR_BNKAD_LMR       (0x00000000)
+#define MCF_SDRAMC_SDMR_BNKAD_LEMR      (0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCR */
+#define MCF_SDRAMC_SDCR_IPALL           (0x00000002)
+#define MCF_SDRAMC_SDCR_IREF            (0x00000004)
+#define MCF_SDRAMC_SDCR_DQS_OE(x)       (((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCR_PS(x)           (((x)&0x00000003)<<12)
+#define MCF_SDRAMC_SDCR_RCNT(x)         (((x)&0x0000003F)<<16)
+#define MCF_SDRAMC_SDCR_OE_RULE         (0x00400000)
+#define MCF_SDRAMC_SDCR_MUX(x)          (((x)&0x00000003)<<24)
+#define MCF_SDRAMC_SDCR_REF             (0x10000000)
+#define MCF_SDRAMC_SDCR_DDR             (0x20000000)
+#define MCF_SDRAMC_SDCR_CKE             (0x40000000)
+#define MCF_SDRAMC_SDCR_MODE_EN         (0x80000000)
+#define MCF_SDRAMC_SDCR_PS_16           (0x00002000)
+#define MCF_SDRAMC_SDCR_PS_32           (0x00000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG1 */
+#define MCF_SDRAMC_SDCFG1_WTLAT(x)      (((x)&0x00000007)<<4)
+#define MCF_SDRAMC_SDCFG1_REF2ACT(x)    (((x)&0x0000000F)<<8)
+#define MCF_SDRAMC_SDCFG1_PRE2ACT(x)    (((x)&0x00000007)<<12)
+#define MCF_SDRAMC_SDCFG1_ACT2RW(x)     (((x)&0x00000007)<<16)
+#define MCF_SDRAMC_SDCFG1_RDLAT(x)      (((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG1_SWT2RD(x)     (((x)&0x00000007)<<24)
+#define MCF_SDRAMC_SDCFG1_SRD2RW(x)     (((x)&0x0000000F)<<28)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCFG2 */
+#define MCF_SDRAMC_SDCFG2_BL(x)         (((x)&0x0000000F)<<16)
+#define MCF_SDRAMC_SDCFG2_BRD2WT(x)     (((x)&0x0000000F)<<20)
+#define MCF_SDRAMC_SDCFG2_BWT2RW(x)     (((x)&0x0000000F)<<24)
+#define MCF_SDRAMC_SDCFG2_BRD2PRE(x)    (((x)&0x0000000F)<<28)
+
+/* Device Errata - LIMP mode work around */
+#define MCF_SDRAMC_REFRESH              (0x40000000)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDDS */
+#define MCF_SDRAMC_SDDS_SB_D(x)         (((x)&0x00000003)<<0)
+#define MCF_SDRAMC_SDDS_SB_S(x)         (((x)&0x00000003)<<2)
+#define MCF_SDRAMC_SDDS_SB_A(x)         (((x)&0x00000003)<<4)
+#define MCF_SDRAMC_SDDS_SB_C(x)         (((x)&0x00000003)<<6)
+#define MCF_SDRAMC_SDDS_SB_E(x)         (((x)&0x00000003)<<8)
+
+/* Bit definitions and macros for MCF_SDRAMC_SDCS */
+#define MCF_SDRAMC_SDCS_CSSZ(x)         (((x)&0x0000001F)<<0)
+#define MCF_SDRAMC_SDCS_BASE(x)         (((x)&0x00000FFF)<<20)
+#define MCF_SDRAMC_SDCS_BA(x)           ((x)&0xFFF00000)
+#define MCF_SDRAMC_SDCS_CSSZ_DIABLE     (0x00000000)
+#define MCF_SDRAMC_SDCS_CSSZ_1MBYTE     (0x00000013)
+#define MCF_SDRAMC_SDCS_CSSZ_2MBYTE     (0x00000014)
+#define MCF_SDRAMC_SDCS_CSSZ_4MBYTE     (0x00000015)
+#define MCF_SDRAMC_SDCS_CSSZ_8MBYTE     (0x00000016)
+#define MCF_SDRAMC_SDCS_CSSZ_16MBYTE    (0x00000017)
+#define MCF_SDRAMC_SDCS_CSSZ_32MBYTE    (0x00000018)
+#define MCF_SDRAMC_SDCS_CSSZ_64MBYTE    (0x00000019)
+#define MCF_SDRAMC_SDCS_CSSZ_128MBYTE   (0x0000001A)
+#define MCF_SDRAMC_SDCS_CSSZ_256MBYTE   (0x0000001B)
+#define MCF_SDRAMC_SDCS_CSSZ_512MBYTE   (0x0000001C)
+#define MCF_SDRAMC_SDCS_CSSZ_1GBYTE     (0x0000001D)
+#define MCF_SDRAMC_SDCS_CSSZ_2GBYTE     (0x0000001E)
+#define MCF_SDRAMC_SDCS_CSSZ_4GBYTE     (0x0000001F)
+
+/*********************************************************************
+ *
+ *      FlexCAN module registers
+ *
+ *********************************************************************/
+#define MCF_FLEXCAN_BASEADDR(x)         (0xFC020000+(x)*0x0800)
+#define MCF_FLEXCAN_CANMCR(x)           MCF_REG32(0xFC020000+(x)*0x0800+0x00)
+#define MCF_FLEXCAN_CANCTRL(x)          MCF_REG32(0xFC020000+(x)*0x0800+0x04)
+#define MCF_FLEXCAN_TIMER(x)            MCF_REG32(0xFC020000+(x)*0x0800+0x08)
+#define MCF_FLEXCAN_RXGMASK(x)          MCF_REG32(0xFC020000+(x)*0x0800+0x10)
+#define MCF_FLEXCAN_RX14MASK(x)         MCF_REG32(0xFC020000+(x)*0x0800+0x14)
+#define MCF_FLEXCAN_RX15MASK(x)         MCF_REG32(0xFC020000+(x)*0x0800+0x18)
+#define MCF_FLEXCAN_ERRCNT(x)           MCF_REG32(0xFC020000+(x)*0x0800+0x1C)
+#define MCF_FLEXCAN_ERRSTAT(x)          MCF_REG32(0xFC020000+(x)*0x0800+0x20)
+#define MCF_FLEXCAN_IMASK(x)            MCF_REG32(0xFC020000+(x)*0x0800+0x28)
+#define MCF_FLEXCAN_IFLAG(x)            MCF_REG32(0xFC020000+(x)*0x0800+0x30)
+
+#define MCF_FLEXCAN_MB_CNT(x,y)         MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0)
+#define MCF_FLEXCAN_MB_ID(x,y)          MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4)
+#define MCF_FLEXCAN_MB_DB(x,y,z)        MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1)
+
+/*
+ *      FlexCAN Module Configuration Register
+ */
+#define CANMCR_MDIS             (0x80000000)
+#define CANMCR_FRZ              (0x40000000)
+#define CANMCR_HALT             (0x10000000)
+#define CANMCR_SOFTRST          (0x02000000)
+#define CANMCR_FRZACK           (0x01000000)
+#define CANMCR_SUPV             (0x00800000)
+#define CANMCR_MAXMB(x)         ((x)&0x0F)
+
+/*
+ *      FlexCAN Control Register
+ */
+#define CANCTRL_PRESDIV(x)      (((x)&0xFF)<<24)
+#define CANCTRL_RJW(x)          (((x)&0x03)<<22)
+#define CANCTRL_PSEG1(x)        (((x)&0x07)<<19)
+#define CANCTRL_PSEG2(x)        (((x)&0x07)<<16)
+#define CANCTRL_BOFFMSK         (0x00008000)
+#define CANCTRL_ERRMSK          (0x00004000)
+#define CANCTRL_CLKSRC          (0x00002000)
+#define CANCTRL_LPB             (0x00001000)
+#define CANCTRL_SAMP            (0x00000080)
+#define CANCTRL_BOFFREC         (0x00000040)
+#define CANCTRL_TSYNC           (0x00000020)
+#define CANCTRL_LBUF            (0x00000010)
+#define CANCTRL_LOM             (0x00000008)
+#define CANCTRL_PROPSEG(x)      ((x)&0x07)
+
+/*
+ *      FlexCAN Error Counter Register
+ */
+#define ERRCNT_RXECTR(x)        (((x)&0xFF)<<8)
+#define ERRCNT_TXECTR(x)        ((x)&0xFF)
+
+/*
+ *      FlexCAN Error and Status Register
+ */
+#define ERRSTAT_BITERR(x)       (((x)&0x03)<<14)
+#define ERRSTAT_ACKERR           (0x00002000)
+#define ERRSTAT_CRCERR           (0x00001000)
+#define ERRSTAT_FRMERR           (0x00000800)
+#define ERRSTAT_STFERR           (0x00000400)
+#define ERRSTAT_TXWRN            (0x00000200)
+#define ERRSTAT_RXWRN            (0x00000100)
+#define ERRSTAT_IDLE             (0x00000080)
+#define ERRSTAT_TXRX             (0x00000040)
+#define ERRSTAT_FLTCONF(x)       (((x)&0x03)<<4)
+#define ERRSTAT_BOFFINT          (0x00000004)
+#define ERRSTAT_ERRINT           (0x00000002)
+
+/*
+ *      Interrupt Mask Register
+ */
+#define IMASK_BUF15M            (0x8000)
+#define IMASK_BUF14M            (0x4000)
+#define IMASK_BUF13M            (0x2000)
+#define IMASK_BUF12M            (0x1000)
+#define IMASK_BUF11M            (0x0800)
+#define IMASK_BUF10M            (0x0400)
+#define IMASK_BUF9M             (0x0200)
+#define IMASK_BUF8M             (0x0100)
+#define IMASK_BUF7M             (0x0080)
+#define IMASK_BUF6M             (0x0040)
+#define IMASK_BUF5M             (0x0020)
+#define IMASK_BUF4M             (0x0010)
+#define IMASK_BUF3M             (0x0008)
+#define IMASK_BUF2M             (0x0004)
+#define IMASK_BUF1M             (0x0002)
+#define IMASK_BUF0M             (0x0001)
+#define IMASK_BUFnM(x)          (0x1<<(x))
+#define IMASK_BUFF_ENABLE_ALL   (0x1111)
+#define IMASK_BUFF_DISABLE_ALL  (0x0000)
+
+/*
+ *      Interrupt Flag Register
+ */
+#define IFLAG_BUF15M            (0x8000)
+#define IFLAG_BUF14M            (0x4000)
+#define IFLAG_BUF13M            (0x2000)
+#define IFLAG_BUF12M            (0x1000)
+#define IFLAG_BUF11M            (0x0800)
+#define IFLAG_BUF10M            (0x0400)
+#define IFLAG_BUF9M             (0x0200)
+#define IFLAG_BUF8M             (0x0100)
+#define IFLAG_BUF7M             (0x0080)
+#define IFLAG_BUF6M             (0x0040)
+#define IFLAG_BUF5M             (0x0020)
+#define IFLAG_BUF4M             (0x0010)
+#define IFLAG_BUF3M             (0x0008)
+#define IFLAG_BUF2M             (0x0004)
+#define IFLAG_BUF1M             (0x0002)
+#define IFLAG_BUF0M             (0x0001)
+#define IFLAG_BUFF_SET_ALL      (0xFFFF)
+#define IFLAG_BUFF_CLEAR_ALL    (0x0000)
+#define IFLAG_BUFnM(x)          (0x1<<(x))
+
+/*
+ *      Message Buffers
+ */
+#define MB_CNT_CODE(x)          (((x)&0x0F)<<24)
+#define MB_CNT_SRR              (0x00400000)
+#define MB_CNT_IDE              (0x00200000)
+#define MB_CNT_RTR              (0x00100000)
+#define MB_CNT_LENGTH(x)        (((x)&0x0F)<<16)
+#define MB_CNT_TIMESTAMP(x)     ((x)&0xFFFF)
+#define MB_ID_STD(x)            (((x)&0x07FF)<<18)
+#define MB_ID_EXT(x)            ((x)&0x3FFFF)
+
+/*********************************************************************
+ *
+ * Edge Port Module (EPORT)
+ *
+ *********************************************************************/
+
+/* Register read/write macros */
+#define MCF_EPORT_EPPAR                MCF_REG16(0xFC094000)
+#define MCF_EPORT_EPDDR                MCF_REG08(0xFC094002)
+#define MCF_EPORT_EPIER                MCF_REG08(0xFC094003)
+#define MCF_EPORT_EPDR                 MCF_REG08(0xFC094004)
+#define MCF_EPORT_EPPDR                MCF_REG08(0xFC094005)
+#define MCF_EPORT_EPFR                 MCF_REG08(0xFC094006)
+
+/* Bit definitions and macros for MCF_EPORT_EPPAR */
+#define MCF_EPORT_EPPAR_EPPA1(x)       (((x)&0x0003)<<2)
+#define MCF_EPORT_EPPAR_EPPA2(x)       (((x)&0x0003)<<4)
+#define MCF_EPORT_EPPAR_EPPA3(x)       (((x)&0x0003)<<6)
+#define MCF_EPORT_EPPAR_EPPA4(x)       (((x)&0x0003)<<8)
+#define MCF_EPORT_EPPAR_EPPA5(x)       (((x)&0x0003)<<10)
+#define MCF_EPORT_EPPAR_EPPA6(x)       (((x)&0x0003)<<12)
+#define MCF_EPORT_EPPAR_EPPA7(x)       (((x)&0x0003)<<14)
+#define MCF_EPORT_EPPAR_LEVEL          (0)
+#define MCF_EPORT_EPPAR_RISING         (1)
+#define MCF_EPORT_EPPAR_FALLING        (2)
+#define MCF_EPORT_EPPAR_BOTH           (3)
+#define MCF_EPORT_EPPAR_EPPA7_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA7_RISING   (0x4000)
+#define MCF_EPORT_EPPAR_EPPA7_FALLING  (0x8000)
+#define MCF_EPORT_EPPAR_EPPA7_BOTH     (0xC000)
+#define MCF_EPORT_EPPAR_EPPA6_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA6_RISING   (0x1000)
+#define MCF_EPORT_EPPAR_EPPA6_FALLING  (0x2000)
+#define MCF_EPORT_EPPAR_EPPA6_BOTH     (0x3000)
+#define MCF_EPORT_EPPAR_EPPA5_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA5_RISING   (0x0400)
+#define MCF_EPORT_EPPAR_EPPA5_FALLING  (0x0800)
+#define MCF_EPORT_EPPAR_EPPA5_BOTH     (0x0C00)
+#define MCF_EPORT_EPPAR_EPPA4_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA4_RISING   (0x0100)
+#define MCF_EPORT_EPPAR_EPPA4_FALLING  (0x0200)
+#define MCF_EPORT_EPPAR_EPPA4_BOTH     (0x0300)
+#define MCF_EPORT_EPPAR_EPPA3_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA3_RISING   (0x0040)
+#define MCF_EPORT_EPPAR_EPPA3_FALLING  (0x0080)
+#define MCF_EPORT_EPPAR_EPPA3_BOTH     (0x00C0)
+#define MCF_EPORT_EPPAR_EPPA2_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA2_RISING   (0x0010)
+#define MCF_EPORT_EPPAR_EPPA2_FALLING  (0x0020)
+#define MCF_EPORT_EPPAR_EPPA2_BOTH     (0x0030)
+#define MCF_EPORT_EPPAR_EPPA1_LEVEL    (0x0000)
+#define MCF_EPORT_EPPAR_EPPA1_RISING   (0x0004)
+#define MCF_EPORT_EPPAR_EPPA1_FALLING  (0x0008)
+#define MCF_EPORT_EPPAR_EPPA1_BOTH     (0x000C)
+
+/* Bit definitions and macros for MCF_EPORT_EPDDR */
+#define MCF_EPORT_EPDDR_EPDD1          (0x02)
+#define MCF_EPORT_EPDDR_EPDD2          (0x04)
+#define MCF_EPORT_EPDDR_EPDD3          (0x08)
+#define MCF_EPORT_EPDDR_EPDD4          (0x10)
+#define MCF_EPORT_EPDDR_EPDD5          (0x20)
+#define MCF_EPORT_EPDDR_EPDD6          (0x40)
+#define MCF_EPORT_EPDDR_EPDD7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPIER */
+#define MCF_EPORT_EPIER_EPIE1          (0x02)
+#define MCF_EPORT_EPIER_EPIE2          (0x04)
+#define MCF_EPORT_EPIER_EPIE3          (0x08)
+#define MCF_EPORT_EPIER_EPIE4          (0x10)
+#define MCF_EPORT_EPIER_EPIE5          (0x20)
+#define MCF_EPORT_EPIER_EPIE6          (0x40)
+#define MCF_EPORT_EPIER_EPIE7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPDR */
+#define MCF_EPORT_EPDR_EPD1            (0x02)
+#define MCF_EPORT_EPDR_EPD2            (0x04)
+#define MCF_EPORT_EPDR_EPD3            (0x08)
+#define MCF_EPORT_EPDR_EPD4            (0x10)
+#define MCF_EPORT_EPDR_EPD5            (0x20)
+#define MCF_EPORT_EPDR_EPD6            (0x40)
+#define MCF_EPORT_EPDR_EPD7            (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPPDR */
+#define MCF_EPORT_EPPDR_EPPD1          (0x02)
+#define MCF_EPORT_EPPDR_EPPD2          (0x04)
+#define MCF_EPORT_EPPDR_EPPD3          (0x08)
+#define MCF_EPORT_EPPDR_EPPD4          (0x10)
+#define MCF_EPORT_EPPDR_EPPD5          (0x20)
+#define MCF_EPORT_EPPDR_EPPD6          (0x40)
+#define MCF_EPORT_EPPDR_EPPD7          (0x80)
+
+/* Bit definitions and macros for MCF_EPORT_EPFR */
+#define MCF_EPORT_EPFR_EPF1            (0x02)
+#define MCF_EPORT_EPFR_EPF2            (0x04)
+#define MCF_EPORT_EPFR_EPF3            (0x08)
+#define MCF_EPORT_EPFR_EPF4            (0x10)
+#define MCF_EPORT_EPFR_EPF5            (0x20)
+#define MCF_EPORT_EPFR_EPF6            (0x40)
+#define MCF_EPORT_EPFR_EPF7            (0x80)
+
+/********************************************************************/
+#endif  /* m532xsim_h */
diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h
new file mode 100644
index 000000000000..cc22c4a53005
--- /dev/null
+++ b/arch/m68k/include/asm/m5407sim.h
@@ -0,0 +1,157 @@
+/****************************************************************************/
+
+/*
+ *      m5407sim.h -- ColdFire 5407 System Integration Module support.
+ *
+ *      (C) Copyright 2000,  Lineo (www.lineo.com)
+ *      (C) Copyright 1999,  Moreton Bay Ventures Pty Ltd.
+ *
+ *      Modified by David W. Miller for the MCF5307 Eval Board.
+ */
+
+/****************************************************************************/
+#ifndef m5407sim_h
+#define m5407sim_h
+/****************************************************************************/
+
+/*
+ *      Define the 5407 SIM register set addresses.
+ */
+#define MCFSIM_RSR              0x00            /* Reset Status reg (r/w) */
+#define MCFSIM_SYPCR            0x01            /* System Protection reg (r/w)*/
+#define MCFSIM_SWIVR            0x02            /* SW Watchdog intr reg (r/w) */
+#define MCFSIM_SWSR             0x03            /* SW Watchdog service (r/w) */
+#define MCFSIM_PAR              0x04            /* Pin Assignment reg (r/w) */
+#define MCFSIM_IRQPAR           0x06            /* Interrupt Assignment reg (r/w) */
+#define MCFSIM_PLLCR            0x08            /* PLL Controll Reg*/
+#define MCFSIM_MPARK            0x0C            /* BUS Master Control Reg*/
+#define MCFSIM_IPR              0x40            /* Interrupt Pend reg (r/w) */
+#define MCFSIM_IMR              0x44            /* Interrupt Mask reg (r/w) */
+#define MCFSIM_AVR              0x4b            /* Autovector Ctrl reg (r/w) */
+#define MCFSIM_ICR0             0x4c            /* Intr Ctrl reg 0 (r/w) */
+#define MCFSIM_ICR1             0x4d            /* Intr Ctrl reg 1 (r/w) */
+#define MCFSIM_ICR2             0x4e            /* Intr Ctrl reg 2 (r/w) */
+#define MCFSIM_ICR3             0x4f            /* Intr Ctrl reg 3 (r/w) */
+#define MCFSIM_ICR4             0x50            /* Intr Ctrl reg 4 (r/w) */
+#define MCFSIM_ICR5             0x51            /* Intr Ctrl reg 5 (r/w) */
+#define MCFSIM_ICR6             0x52            /* Intr Ctrl reg 6 (r/w) */
+#define MCFSIM_ICR7             0x53            /* Intr Ctrl reg 7 (r/w) */
+#define MCFSIM_ICR8             0x54            /* Intr Ctrl reg 8 (r/w) */
+#define MCFSIM_ICR9             0x55            /* Intr Ctrl reg 9 (r/w) */
+#define MCFSIM_ICR10            0x56            /* Intr Ctrl reg 10 (r/w) */
+#define MCFSIM_ICR11            0x57            /* Intr Ctrl reg 11 (r/w) */
+
+#define MCFSIM_CSAR0            0x80            /* CS 0 Address 0 reg (r/w) */
+#define MCFSIM_CSMR0            0x84            /* CS 0 Mask 0 reg (r/w) */
+#define MCFSIM_CSCR0            0x8a            /* CS 0 Control reg (r/w) */
+#define MCFSIM_CSAR1            0x8c            /* CS 1 Address reg (r/w) */
+#define MCFSIM_CSMR1            0x90            /* CS 1 Mask reg (r/w) */
+#define MCFSIM_CSCR1            0x96            /* CS 1 Control reg (r/w) */
+
+#define MCFSIM_CSAR2            0x98            /* CS 2 Address reg (r/w) */
+#define MCFSIM_CSMR2            0x9c            /* CS 2 Mask reg (r/w) */
+#define MCFSIM_CSCR2            0xa2            /* CS 2 Control reg (r/w) */
+#define MCFSIM_CSAR3            0xa4            /* CS 3 Address reg (r/w) */
+#define MCFSIM_CSMR3            0xa8            /* CS 3 Mask reg (r/w) */
+#define MCFSIM_CSCR3            0xae            /* CS 3 Control reg (r/w) */
+#define MCFSIM_CSAR4            0xb0            /* CS 4 Address reg (r/w) */
+#define MCFSIM_CSMR4            0xb4            /* CS 4 Mask reg (r/w) */
+#define MCFSIM_CSCR4            0xba            /* CS 4 Control reg (r/w) */
+#define MCFSIM_CSAR5            0xbc            /* CS 5 Address reg (r/w) */
+#define MCFSIM_CSMR5            0xc0            /* CS 5 Mask reg (r/w) */
+#define MCFSIM_CSCR5            0xc6            /* CS 5 Control reg (r/w) */
+#define MCFSIM_CSAR6            0xc8            /* CS 6 Address reg (r/w) */
+#define MCFSIM_CSMR6            0xcc            /* CS 6 Mask reg (r/w) */
+#define MCFSIM_CSCR6            0xd2            /* CS 6 Control reg (r/w) */
+#define MCFSIM_CSAR7            0xd4            /* CS 7 Address reg (r/w) */
+#define MCFSIM_CSMR7            0xd8            /* CS 7 Mask reg (r/w) */
+#define MCFSIM_CSCR7            0xde            /* CS 7 Control reg (r/w) */
+
+#define MCFSIM_DCR              0x100           /* DRAM Control reg (r/w) */
+#define MCFSIM_DACR0            0x108           /* DRAM 0 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR0             0x10c           /* DRAM 0 Mask reg (r/w) */
+#define MCFSIM_DACR1            0x110           /* DRAM 1 Addr and Ctrl (r/w) */
+#define MCFSIM_DMR1             0x114           /* DRAM 1 Mask reg (r/w) */
+
+#define MCFSIM_PADDR            0x244           /* Parallel Direction (r/w) */
+#define MCFSIM_PADAT            0x248           /* Parallel Data (r/w) */
+
+
+/*
+ *      Some symbol defines for the above...
+ */
+#define MCFSIM_SWDICR           MCFSIM_ICR0     /* Watchdog timer ICR */
+#define MCFSIM_TIMER1ICR        MCFSIM_ICR1     /* Timer 1 ICR */
+#define MCFSIM_TIMER2ICR        MCFSIM_ICR2     /* Timer 2 ICR */
+#define MCFSIM_UART1ICR         MCFSIM_ICR4     /* UART 1 ICR */
+#define MCFSIM_UART2ICR         MCFSIM_ICR5     /* UART 2 ICR */
+#define MCFSIM_DMA0ICR          MCFSIM_ICR6     /* DMA 0 ICR */
+#define MCFSIM_DMA1ICR          MCFSIM_ICR7     /* DMA 1 ICR */
+#define MCFSIM_DMA2ICR          MCFSIM_ICR8     /* DMA 2 ICR */
+#define MCFSIM_DMA3ICR          MCFSIM_ICR9     /* DMA 3 ICR */
+
+/*
+ *      Macro to set IMR register. It is 32 bits on the 5407.
+ */
+#define mcf_getimr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR))
+
+#define mcf_setimr(imr)         \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr);
+
+#define mcf_getipr()            \
+        *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IPR))
+
+
+/*
+ *      Some symbol defines for the Parallel Port Pin Assignment Register
+ */
+#define MCFSIM_PAR_DREQ0        0x40            /* Set to select DREQ0 input */
+                                                /* Clear to select par I/O */
+#define MCFSIM_PAR_DREQ1        0x20            /* Select DREQ1 input */
+                                                /* Clear to select par I/O */
+
+/*
+ *       Defines for the IRQPAR Register
+ */
+#define IRQ5_LEVEL4     0x80
+#define IRQ3_LEVEL6     0x40
+#define IRQ1_LEVEL2     0x20
+
+
+/*
+ *      Define the Cache register flags.
+ */
+#define CACR_DEC                0x80000000      /* Enable data cache */
+#define CACR_DWP                0x40000000      /* Data write protection */
+#define CACR_DESB               0x20000000      /* Enable data store buffer */
+#define CACR_DDPI               0x10000000      /* Disable CPUSHL */
+#define CACR_DHCLK              0x08000000      /* Half data cache lock mode */
+#define CACR_DDCM_WT            0x00000000      /* Write through cache*/
+#define CACR_DDCM_CP            0x02000000      /* Copyback cache */
+#define CACR_DDCM_P             0x04000000      /* No cache, precise */
+#define CACR_DDCM_IMP           0x06000000      /* No cache, imprecise */
+#define CACR_DCINVA             0x01000000      /* Invalidate data cache */
+#define CACR_BEC                0x00080000      /* Enable branch cache */
+#define CACR_BCINVA             0x00040000      /* Invalidate branch cache */
+#define CACR_IEC                0x00008000      /* Enable instruction cache */
+#define CACR_DNFB               0x00002000      /* Inhibited fill buffer */
+#define CACR_IDPI               0x00001000      /* Disable CPUSHL */
+#define CACR_IHLCK              0x00000800      /* Intruction cache half lock */
+#define CACR_IDCM               0x00000400      /* Intruction cache inhibit */
+#define CACR_ICINVA             0x00000100      /* Invalidate instr cache */
+
+#define ACR_BASE_POS            24              /* Address Base */
+#define ACR_MASK_POS            16              /* Address Mask */
+#define ACR_ENABLE              0x00008000      /* Enable address */
+#define ACR_USER                0x00000000      /* User mode access only */
+#define ACR_SUPER               0x00002000      /* Supervisor mode only */
+#define ACR_ANY                 0x00004000      /* Match any access mode */
+#define ACR_CM_WT               0x00000000      /* Write through mode */
+#define ACR_CM_CP               0x00000020      /* Copyback mode */
+#define ACR_CM_OFF_PRE          0x00000040      /* No cache, precise */
+#define ACR_CM_OFF_IMP          0x00000060      /* No cache, imprecise */
+#define ACR_WPROTECT            0x00000004      /* Write protect */
+
+/****************************************************************************/
+#endif  /* m5407sim_h */
diff --git a/arch/m68k/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h
new file mode 100644
index 000000000000..eb7d39ef2855
--- /dev/null
+++ b/arch/m68k/include/asm/m68360.h
@@ -0,0 +1,13 @@
+#include "m68360_regs.h"
+#include "m68360_pram.h"
+#include "m68360_quicc.h"
+#include "m68360_enet.h"
+
+#ifdef CONFIG_M68360
+
+#define CPM_INTERRUPT    4
+
+/* see MC68360 User's Manual, p. 7-377  */
+#define CPM_VECTOR_BASE  0x04           /* 3 MSbits of CPM vector */
+
+#endif /* CONFIG_M68360 */
diff --git a/arch/m68k/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h
new file mode 100644
index 000000000000..c36f4d059203
--- /dev/null
+++ b/arch/m68k/include/asm/m68360_enet.h
@@ -0,0 +1,177 @@
+/***********************************
+ * $Id: m68360_enet.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions for the ETHERNET controllers
+ ***************************************
+ */
+
+#ifndef __ETHER_H
+#define __ETHER_H
+
+#include "quicc_simple.h"
+
+/*
+ * transmit BD's
+ */
+#define T_R     0x8000          /* ready bit */
+#define E_T_PAD 0x4000          /* short frame padding */
+#define T_W     0x2000          /* wrap bit */
+#define T_I     0x1000          /* interrupt on completion */
+#define T_L     0x0800          /* last in frame */
+#define T_TC    0x0400          /* transmit CRC (when last) */
+
+#define T_DEF   0x0200          /* defer indication */
+#define T_HB    0x0100          /* heartbeat */
+#define T_LC    0x0080          /* error: late collision */
+#define T_RL    0x0040          /* error: retransmission limit */
+#define T_RC    0x003c          /* retry count */
+#define T_UN    0x0002          /* error: underrun */
+#define T_CSL   0x0001          /* carier sense lost */
+#define T_ERROR (T_HB | T_LC | T_RL | T_UN | T_CSL)
+
+/*
+ * receive BD's
+ */
+#define R_E     0x8000          /* buffer empty */
+#define R_W     0x2000          /* wrap bit */
+#define R_I     0x1000          /* interrupt on reception */
+#define R_L     0x0800          /* last BD in frame */
+#define R_F     0x0400          /* first BD in frame */
+#define R_M     0x0100          /* received because of promisc. mode */
+
+#define R_LG    0x0020          /* frame too long */
+#define R_NO    0x0010          /* non-octet aligned */
+#define R_SH    0x0008          /* short frame */
+#define R_CR    0x0004          /* receive CRC error */
+#define R_OV    0x0002          /* receive overrun */
+#define R_CL    0x0001          /* collision */
+#define ETHER_R_ERROR (R_LG | R_NO | R_SH | R_CR | R_OV | R_CL)
+
+
+/*
+ * ethernet interrupts
+ */
+#define ETHERNET_GRA    0x0080  /* graceful stop complete */
+#define ETHERNET_TXE    0x0010  /* transmit error         */
+#define ETHERNET_RXF    0x0008  /* receive frame          */
+#define ETHERNET_BSY    0x0004  /* busy condition         */
+#define ETHERNET_TXB    0x0002  /* transmit buffer        */
+#define ETHERNET_RXB    0x0001  /* receive buffer         */
+
+/*
+ * ethernet protocol specific mode register (PSMR)
+ */
+#define ETHER_HBC       0x8000    /* heartbeat checking      */
+#define ETHER_FC        0x4000    /* force collision         */
+#define ETHER_RSH       0x2000    /* receive short frames    */
+#define ETHER_IAM       0x1000    /* individual address mode */
+#define ETHER_CRC_32    (0x2<<10) /* Enable CRC              */
+#define ETHER_PRO       0x0200    /* promiscuous             */
+#define ETHER_BRO       0x0100    /* broadcast address       */
+#define ETHER_SBT       0x0080    /* stop backoff timer      */
+#define ETHER_LPB       0x0040    /* Loop Back Mode          */
+#define ETHER_SIP       0x0020    /* sample input pins       */
+#define ETHER_LCW       0x0010    /* late collision window   */
+#define ETHER_NIB_13    (0x0<<1)  /* # of ignored bits 13    */
+#define ETHER_NIB_14    (0x1<<1)  /* # of ignored bits 14    */
+#define ETHER_NIB_15    (0x2<<1)  /* # of ignored bits 15    */
+#define ETHER_NIB_16    (0x3<<1)  /* # of ignored bits 16    */
+#define ETHER_NIB_21    (0x4<<1)  /* # of ignored bits 21    */
+#define ETHER_NIB_22    (0x5<<1)  /* # of ignored bits 22    */
+#define ETHER_NIB_23    (0x6<<1)  /* # of ignored bits 23    */
+#define ETHER_NIB_24    (0x7<<1)  /* # of ignored bits 24    */
+
+/*
+ * ethernet specific parameters
+ */
+#define CRC_WORD 4          /* Length in bytes of CRC */               
+#define C_PRES   0xffffffff /* preform 32 bit CRC */
+#define C_MASK   0xdebb20e3 /* comply with 32 bit CRC */       
+#define CRCEC    0x00000000
+#define ALEC     0x00000000
+#define DISFC    0x00000000
+#define PADS     0x00000000
+#define RET_LIM  0x000f     /* retry 15 times to send a frame before interrupt */
+#define ETH_MFLR 0x05ee     /* 1518 max frame size */
+#define MINFLR   0x0040     /* Minimum frame size 64 */
+#define MAXD1    0x05ee     /* Max dma count 1518 */
+#define MAXD2    0x05ee
+#define GADDR1   0x00000000 /* Clear group address */  
+#define GADDR2   0x00000000
+#define GADDR3   0x00000000    
+#define GADDR4   0x00000000    
+#define P_PER    0x00000000 /*not used */              
+#define IADDR1   0x00000000 /* Individual hash table not used */       
+#define IADDR2   0x00000000
+#define IADDR3   0x00000000    
+#define IADDR4   0x00000000            
+#define TADDR_H  0x00000000 /* clear this regs */              
+#define TADDR_M  0x00000000            
+#define TADDR_L  0x00000000            
+
+/*       SCC Parameter Ram */
+#define RFCR    0x18 /* normal operation */
+#define TFCR    0x18 /* normal operation */
+#define E_MRBLR 1518 /* Max ethernet frame length */
+
+/*
+ * ethernet specific structure
+ */
+typedef union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+} ETHER_ADDR;
+
+typedef struct {
+    int        max_frame_length;
+    int        promisc_mode;
+    int        reject_broadcast;
+    ETHER_ADDR phys_adr;
+} ETHER_SPECIFIC;
+
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[1];
+} ETHER_FRAME;
+
+#define MAX_DATALEN 1500
+typedef struct {
+    ETHER_ADDR     dst_addr;
+    ETHER_ADDR     src_addr;
+    unsigned short type_or_len;
+    unsigned char  data[MAX_DATALEN];
+    unsigned char  fcs[CRC_WORD];
+} ETHER_MAX_FRAME;
+
+
+/*
+ * Internal ethernet function prototypes
+ */
+void        ether_interrupt(int scc_num);
+/* mleslie: debug */
+/* static void ethernet_rx_internal(int scc_num); */
+/* static void ethernet_tx_internal(int scc_num); */
+
+/*
+ * User callable routines prototypes (ethernet specific)
+ */
+void ethernet_init(int                       scc_number,
+                   alloc_routine             *alloc_buffer,
+                   free_routine              *free_buffer,
+                   store_rx_buffer_routine   *store_rx_buffer,
+                   handle_tx_error_routine   *handle_tx_error,
+                   handle_rx_error_routine   *handle_rx_error,
+                   handle_lost_error_routine *handle_lost_error,
+                   ETHER_SPECIFIC            *ether_spec);
+int  ethernet_tx(int scc_number, void *buf, int length);
+
+#endif
+
diff --git a/arch/m68k/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h
new file mode 100644
index 000000000000..e6088bbce93d
--- /dev/null
+++ b/arch/m68k/include/asm/m68360_pram.h
@@ -0,0 +1,431 @@
+/***********************************
+ * $Id: m68360_pram.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the parameter area RAM.
+ * Note that different structures are overlaid
+ * at the same offsets for the different modes
+ * of operation.
+ ***************************************
+ */
+
+#ifndef __PRAM_H
+#define __PRAM_H
+
+/* Time slot assignment table */
+#define VALID_SLOT      0x8000
+#define WRAP_SLOT       0x4000
+
+/*****************************************************************
+        Global Multichannel parameter RAM
+*****************************************************************/
+struct global_multi_pram {
+    /*
+     * Global Multichannel parameter RAM
+     */
+    unsigned long   mcbase;             /* Multichannel Base pointer */
+    unsigned short  qmcstate;           /* Multichannel Controller state */
+    unsigned short  mrblr;              /* Maximum Receive Buffer Length */
+    unsigned short  tx_s_ptr;           /* TSTATx Pointer */
+    unsigned short  rxptr;              /* Current Time slot entry in TSATRx */
+    unsigned short  grfthr;             /* Global Receive frame threshold */
+    unsigned short  grfcnt;             /* Global Receive Frame Count */
+    unsigned long   intbase;            /* Multichannel Base address */
+    unsigned long   iintptr;            /* Pointer to interrupt queue */
+    unsigned short  rx_s_ptr;           /* TSTARx Pointer */
+
+    unsigned short  txptr;              /* Current Time slot entry in TSATTx */
+    unsigned long   c_mask32;           /* CRC Constant (debb20e3) */
+    unsigned short  tsatrx[32];         /* Time Slot Assignment Table Rx */
+    unsigned short  tsattx[32];         /* Time Slot Assignment Table Tx */
+    unsigned short  c_mask16;           /* CRC Constant (f0b8) */
+};
+
+/*****************************************************************
+        Quicc32 HDLC parameter RAM
+*****************************************************************/
+struct quicc32_pram {
+
+    unsigned short  tbase;              /* Tx Buffer Descriptors Base Address */
+    unsigned short  chamr;              /* Channel Mode Register */
+    unsigned long   tstate;             /* Tx Internal State */
+    unsigned long   txintr;             /* Tx Internal Data Pointer */
+    unsigned short  tbptr;              /* Tx Buffer Descriptor Pointer */
+    unsigned short  txcntr;             /* Tx Internal Byte Count */
+    unsigned long   tupack;             /* (Tx Temp) */
+    unsigned long   zistate;            /* Zero Insertion machine state */
+    unsigned long   tcrc;               /* Temp Transmit CRC */
+    unsigned short  intmask;            /* Channel's interrupt mask flags */
+    unsigned short  bdflags;            
+    unsigned short  rbase;              /* Rx Buffer Descriptors Base Address */
+    unsigned short  mflr;               /* Max Frame Length Register */
+    unsigned long   rstate;             /* Rx Internal State */
+    unsigned long   rxintr;             /* Rx Internal Data Pointer */
+    unsigned short  rbptr;              /* Rx Buffer Descriptor Pointer */
+    unsigned short  rxbyc;              /* Rx Internal Byte Count */
+    unsigned long   rpack;              /* (Rx Temp) */
+    unsigned long   zdstate;            /* Zero Deletion machine state */
+    unsigned long   rcrc;               /* Temp Transmit CRC */
+    unsigned short  maxc;               /* Max_length counter */
+    unsigned short  tmp_mb;             /* Temp */
+};
+
+
+/*****************************************************************
+        HDLC parameter RAM
+*****************************************************************/
+
+struct hdlc_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * HDLC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   c_mask;         /* CRC constant */
+    unsigned long   c_pres;         /* CRC preset */
+    unsigned short  disfc;          /* discarded frame counter */
+    unsigned short  crcec;          /* CRC error counter */
+    unsigned short  abtsc;          /* abort sequence counter */
+    unsigned short  nmarc;          /* nonmatching address rx cnt */
+    unsigned short  retrc;          /* frame retransmission cnt */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  max_cnt;        /* maximum length counter */
+    unsigned short  rfthr;          /* received frames threshold */
+    unsigned short  rfcnt;          /* received frames count */
+    unsigned short  hmask;          /* user defined frm addr mask */
+    unsigned short  haddr1;         /* user defined frm address 1 */
+    unsigned short  haddr2;         /* user defined frm address 2 */
+    unsigned short  haddr3;         /* user defined frm address 3 */
+    unsigned short  haddr4;         /* user defined frm address 4 */
+    unsigned short  tmp;            /* temp */
+    unsigned short  tmp_mb;         /* temp */
+};
+
+
+
+/*****************************************************************
+        UART parameter RAM
+*****************************************************************/
+
+/*
+ * bits in uart control characters table
+ */
+#define CC_INVALID  0x8000          /* control character is valid */
+#define CC_REJ      0x4000          /* don't store char in buffer */
+#define CC_CHAR     0x00ff          /* control character */
+
+/* UART */
+struct uart_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rx_temp;        /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * UART specific parameter RAM
+     */
+    unsigned char   RESERVED1[8];   /* Reserved area */
+    unsigned short  max_idl;        /* maximum idle characters */
+    unsigned short  idlc;           /* rx idle counter (internal) */
+    unsigned short  brkcr;          /* break count register */
+                   
+    unsigned short  parec;          /* Rx parity error counter */
+    unsigned short  frmer;          /* Rx framing error counter */
+    unsigned short  nosec;          /* Rx noise counter */
+    unsigned short  brkec;          /* Rx break character counter */
+    unsigned short  brkln;          /* Reaceive break length */
+                   
+    unsigned short  uaddr1;         /* address character 1 */
+    unsigned short  uaddr2;         /* address character 2 */
+    unsigned short  rtemp;          /* temp storage */
+    unsigned short  toseq;          /* Tx out of sequence char */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Rx control char mask */
+    unsigned short  rccr;           /* Rx control char register */
+    unsigned short  rlbc;           /* Receive last break char */
+};
+
+
+
+/*****************************************************************
+        BISYNC parameter RAM
+*****************************************************************/
+
+struct bisync_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * BISYNC specific parameter RAM
+     */
+    unsigned char   RESERVED1[4];   /* Reserved area */
+    unsigned long   crcc;           /* CRC Constant Temp Value */
+    unsigned short  prcrc;          /* Preset Receiver CRC-16/LRC */
+    unsigned short  ptcrc;          /* Preset Transmitter CRC-16/LRC */
+    unsigned short  parec;          /* Receive Parity Error Counter */
+    unsigned short  bsync;          /* BISYNC SYNC Character */
+    unsigned short  bdle;           /* BISYNC DLE Character */
+    unsigned short  cc[8];          /* Rx control characters */
+    unsigned short  rccm;           /* Receive Control Character Mask */
+};
+
+/*****************************************************************
+        IOM2 parameter RAM
+        (overlaid on tx bd[5] of SCC channel[2])
+*****************************************************************/
+struct iom2_pram {
+    unsigned short  ci_data;        /* ci data */
+    unsigned short  monitor_data;   /* monitor data */
+    unsigned short  tstate;         /* transmitter state */
+    unsigned short  rstate;         /* receiver state */
+};
+
+/*****************************************************************
+        SPI/SMC parameter RAM
+        (overlaid on tx bd[6,7] of SCC channel[2])
+*****************************************************************/
+
+#define SPI_R       0x8000          /* Ready bit in BD */
+
+struct spi_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+};
+
+struct smc_uart_pram {
+    unsigned short  rbase;          /* Rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  max_idl;        /* Maximum IDLE Characters */
+    unsigned short  idlc;           /* Temporary IDLE Counter */
+    unsigned short  brkln;          /* Last Rx Break Length */
+    unsigned short  brkec;          /* Rx Break Condition Counter */
+    unsigned short  brkcr;          /* Break Count Register (Tx) */
+    unsigned short  r_mask;         /* Temporary bit mask */
+};
+
+struct smc_trnsp_pram {
+    unsigned short  rbase;          /* rx BD Base Address */
+    unsigned short  tbase;          /* Tx BD Base Address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned short  reserved[5];    /* Reserved */
+};
+
+struct idma_pram {
+    unsigned short  ibase;          /* IDMA BD Base Address */
+    unsigned short  ibptr;          /* IDMA buffer descriptor pointer */
+    unsigned long   istate;         /* IDMA internal state */
+    unsigned long   itemp;          /* IDMA temp */
+};
+
+struct ethernet_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * ETHERNET specific parameter RAM
+     */
+    unsigned long   c_pres;         /* preset CRC */
+    unsigned long   c_mask;         /* constant mask for CRC */
+    unsigned long   crcec;          /* CRC error counter */
+    unsigned long   alec;           /* alighnment error counter */
+    unsigned long   disfc;          /* discard frame counter */
+    unsigned short  pads;           /* short frame PAD characters */
+    unsigned short  ret_lim;        /* retry limit threshold */
+    unsigned short  ret_cnt;        /* retry limit counter */
+    unsigned short  mflr;           /* maximum frame length reg */
+    unsigned short  minflr;         /* minimum frame length reg */
+    unsigned short  maxd1;          /* maximum DMA1 length reg */
+    unsigned short  maxd2;          /* maximum DMA2 length reg */
+    unsigned short  maxd;           /* rx max DMA */
+    unsigned short  dma_cnt;        /* rx dma counter */
+    unsigned short  max_b;          /* max bd byte count */
+    unsigned short  gaddr1;         /* group address filter 1 */
+    unsigned short  gaddr2;         /* group address filter 2 */
+    unsigned short  gaddr3;         /* group address filter 3 */
+    unsigned short  gaddr4;         /* group address filter 4 */
+    unsigned long   tbuf0_data0;    /* save area 0 - current frm */
+    unsigned long   tbuf0_data1;    /* save area 1 - current frm */
+    unsigned long   tbuf0_rba0;
+    unsigned long   tbuf0_crc;
+    unsigned short  tbuf0_bcnt;
+    union {
+        unsigned char b[6];
+        struct {
+            unsigned short high;
+            unsigned short middl;
+            unsigned short low;
+        } w;
+    } paddr;
+    unsigned short  p_per;          /* persistence */
+    unsigned short  rfbd_ptr;       /* rx first bd pointer */
+    unsigned short  tfbd_ptr;       /* tx first bd pointer */
+    unsigned short  tlbd_ptr;       /* tx last bd pointer */
+    unsigned long   tbuf1_data0;    /* save area 0 - next frame */
+    unsigned long   tbuf1_data1;    /* save area 1 - next frame */
+    unsigned long   tbuf1_rba0;
+    unsigned long   tbuf1_crc;
+    unsigned short  tbuf1_bcnt;
+    unsigned short  tx_len;         /* tx frame length counter */
+    unsigned short  iaddr1;         /* individual address filter 1*/
+    unsigned short  iaddr2;         /* individual address filter 2*/
+    unsigned short  iaddr3;         /* individual address filter 3*/
+    unsigned short  iaddr4;         /* individual address filter 4*/
+    unsigned short  boff_cnt;       /* back-off counter */
+    unsigned short  taddr_h;        /* temp address (MSB) */
+    unsigned short  taddr_m;        /* temp address */
+    unsigned short  taddr_l;        /* temp address (LSB) */
+};
+
+struct transparent_pram {
+    /*
+     * SCC parameter RAM
+     */
+    unsigned short  rbase;          /* RX BD base address */
+    unsigned short  tbase;          /* TX BD base address */
+    unsigned char   rfcr;           /* Rx function code */
+    unsigned char   tfcr;           /* Tx function code */
+    unsigned short  mrblr;          /* Rx buffer length */
+    unsigned long   rstate;         /* Rx internal state */
+    unsigned long   rptr;           /* Rx internal data pointer */
+    unsigned short  rbptr;          /* rb BD Pointer */
+    unsigned short  rcount;         /* Rx internal byte count */
+    unsigned long   rtemp;          /* Rx temp */
+    unsigned long   tstate;         /* Tx internal state */
+    unsigned long   tptr;           /* Tx internal data pointer */
+    unsigned short  tbptr;          /* Tx BD pointer */
+    unsigned short  tcount;         /* Tx byte count */
+    unsigned long   ttemp;          /* Tx temp */
+    unsigned long   rcrc;           /* temp receive CRC */
+    unsigned long   tcrc;           /* temp transmit CRC */
+   
+    /*
+     * TRANSPARENT specific parameter RAM
+     */
+    unsigned long   crc_p;          /* CRC Preset */
+    unsigned long   crc_c;          /* CRC constant */
+};
+
+struct timer_pram {
+    /*
+     * RISC timers parameter RAM
+     */
+    unsigned short  tm_base;        /* RISC timer table base adr */
+    unsigned short  tm_ptr;         /* RISC timer table pointer */
+    unsigned short  r_tmr;          /* RISC timer mode register */
+    unsigned short  r_tmv;          /* RISC timer valid register */
+    unsigned long   tm_cmd;         /* RISC timer cmd register */
+    unsigned long   tm_cnt;         /* RISC timer internal cnt */
+};
+
+#endif
diff --git a/arch/m68k/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h
new file mode 100644
index 000000000000..6d40f4d18e10
--- /dev/null
+++ b/arch/m68k/include/asm/m68360_quicc.h
@@ -0,0 +1,362 @@
+/***********************************
+ * $Id: m68360_quicc.h,v 1.1 2002/03/02 15:01:07 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of QUICC memory structures
+ ***************************************
+ */
+
+#ifndef __M68360_QUICC_H
+#define __M68360_QUICC_H
+
+/*
+ * include registers and
+ * parameter ram definitions files
+ */
+#include <asm/m68360_regs.h>
+#include <asm/m68360_pram.h>
+
+
+
+/* Buffer Descriptors */
+typedef struct quicc_bd {
+    volatile unsigned short     status;
+    volatile unsigned short     length;
+    volatile unsigned char      *buf;     /* WARNING: This is only true if *char is 32 bits */
+} QUICC_BD;
+
+
+#ifdef MOTOROLA_ORIGINAL
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /*user data bd's Ucode*/
+    volatile unsigned char      udata_bd[0x200];       /*user data Ucode     */
+    volatile unsigned char      ucode_ext[0x100];      /*Ucode Extention ram */
+    volatile unsigned char      RESERVED1[0x500];      /* Reserved area      */
+};
+#else
+struct user_data {
+    /* BASE + 0x000: user data memory */
+    volatile unsigned char      udata_bd_ucode[0x400]; /* user data, bds, Ucode*/
+    volatile unsigned char      udata_bd1[0x200];       /* user, bds */
+    volatile unsigned char      ucode_bd_scratch[0x100]; /* user, bds, ucode scratch */
+    volatile unsigned char      udata_bd2[0x100];       /* user, bds */
+    volatile unsigned char      RESERVED1[0x400];      /* Reserved area      */
+};
+#endif
+
+
+/*
+ * internal ram
+ */
+typedef struct quicc {
+        union {
+                struct quicc32_pram ch_pram_tbl[32];    /* 32*64(bytes) per channel */  
+                struct user_data                u;
+        }ch_or_u;       /* multipul or user space */
+
+    /* BASE + 0xc00: PARAMETER RAM */
+        union {
+                struct scc_pram {
+                        union {
+                                struct hdlc_pram        h;
+                                struct uart_pram        u;
+                                struct bisync_pram      b;
+                                struct transparent_pram t;
+                                unsigned char   RESERVED66[0x70];
+                        } pscc;               /* scc parameter area (protocol dependent) */
+                        union {
+                                struct {
+                                        unsigned char       RESERVED70[0x10];
+                                        struct spi_pram     spi;
+                                        unsigned char       RESERVED72[0x8];
+                                        struct timer_pram   timer;
+                                } timer_spi;
+                                struct {
+                                        struct idma_pram idma;
+                                        unsigned char       RESERVED67[0x4];
+                                        union {
+                                                struct smc_uart_pram u;
+                                                struct smc_trnsp_pram t;
+                                        } psmc;
+                                } idma_smc;
+                        } pothers;
+                } scc;
+                struct ethernet_pram    enet_scc;
+                struct global_multi_pram        m;
+                unsigned char   pr[0x100];
+        } pram[4];
+
+    /* reserved */
+
+    /* BASE + 0x1000: INTERNAL REGISTERS */
+    /* SIM */
+    volatile unsigned long      sim_mcr;        /* module configuration reg */
+    volatile unsigned short     sim_simtr;      /* module test register     */
+    volatile unsigned char      RESERVED2[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_avr;        /* auto vector reg          */
+    volatile unsigned char      sim_rsr;        /* reset status reg         */
+    volatile unsigned char      RESERVED3[0x2]; /* Reserved area            */
+    volatile unsigned char      sim_clkocr;     /* CLCO control register    */
+    volatile unsigned char      RESERVED62[0x3];        /* Reserved area    */
+    volatile unsigned short     sim_pllcr;      /* PLL control register     */
+    volatile unsigned char      RESERVED63[0x2];        /* Reserved area    */
+    volatile unsigned short     sim_cdvcr;      /* Clock devider control register */
+    volatile unsigned short     sim_pepar;      /* Port E pin assignment register */
+    volatile unsigned char      RESERVED64[0xa];        /* Reserved area    */
+    volatile unsigned char      sim_sypcr;      /* system protection control*/
+    volatile unsigned char      sim_swiv;       /* software interrupt vector*/
+    volatile unsigned char      RESERVED6[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_picr;       /* periodic interrupt control reg */
+    volatile unsigned char      RESERVED7[0x2]; /* Reserved area            */
+    volatile unsigned short     sim_pitr;       /* periodic interrupt timing reg */
+    volatile unsigned char      RESERVED8[0x3]; /* Reserved area            */
+    volatile unsigned char      sim_swsr;       /* software service         */
+    volatile unsigned long      sim_bkar;       /* breakpoint address register*/
+    volatile unsigned long      sim_bkcr;       /* breakpoint control register*/
+    volatile unsigned char      RESERVED10[0x8];        /* Reserved area    */
+    /* MEMC */
+    volatile unsigned long      memc_gmr;       /* Global memory register   */
+    volatile unsigned short     memc_mstat;     /* MEMC status register     */
+    volatile unsigned char      RESERVED11[0xa];        /* Reserved area    */
+    volatile unsigned long      memc_br0;       /* base register 0          */
+    volatile unsigned long      memc_or0;       /* option register 0        */
+    volatile unsigned char      RESERVED12[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br1;       /* base register 1          */
+    volatile unsigned long      memc_or1;       /* option register 1        */
+    volatile unsigned char      RESERVED13[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br2;       /* base register 2          */
+    volatile unsigned long      memc_or2;       /* option register 2        */
+    volatile unsigned char      RESERVED14[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br3;       /* base register 3          */
+    volatile unsigned long      memc_or3;       /* option register 3        */
+    volatile unsigned char      RESERVED15[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br4;       /* base register 3          */
+    volatile unsigned long      memc_or4;       /* option register 3        */
+    volatile unsigned char      RESERVED16[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br5;       /* base register 3          */
+    volatile unsigned long      memc_or5;       /* option register 3        */
+    volatile unsigned char      RESERVED17[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br6;       /* base register 3          */
+    volatile unsigned long      memc_or6;       /* option register 3        */
+    volatile unsigned char      RESERVED18[0x8];        /* Reserved area    */
+    volatile unsigned long      memc_br7;       /* base register 3          */
+    volatile unsigned long      memc_or7;       /* option register 3        */
+    volatile unsigned char      RESERVED9[0x28];        /* Reserved area    */
+    /* TEST */
+    volatile unsigned short     test_tstmra;    /* master shift a           */
+    volatile unsigned short     test_tstmrb;    /* master shift b           */
+    volatile unsigned short     test_tstsc;     /* shift count              */
+    volatile unsigned short     test_tstrc;     /* repetition counter       */
+    volatile unsigned short     test_creg;      /* control                  */
+    volatile unsigned short     test_dreg;      /* destributed register     */
+    volatile unsigned char      RESERVED58[0x404];      /* Reserved area    */
+    /* IDMA1 */
+    volatile unsigned short     idma_iccr;      /* channel configuration reg*/
+    volatile unsigned char      RESERVED19[0x2];        /* Reserved area    */
+    volatile unsigned short     idma1_cmr;      /* dma mode reg             */
+    volatile unsigned char      RESERVED68[0x2];        /* Reserved area    */
+    volatile unsigned long      idma1_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma1_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma1_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma1_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED20;     /* Reserved area            */
+    volatile unsigned char      idma1_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED21;     /* Reserved area            */
+    volatile unsigned char      idma1_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED22[0x3];        /* Reserved area    */
+    /* SDMA */
+    volatile unsigned char      sdma_sdsr;      /* status reg               */
+    volatile unsigned char      RESERVED23;     /* Reserved area            */
+    volatile unsigned short     sdma_sdcr;      /* configuration reg        */
+    volatile unsigned long      sdma_sdar;      /* address reg              */
+    /* IDMA2 */
+    volatile unsigned char      RESERVED69[0x2];        /* Reserved area    */
+    volatile unsigned short     idma2_cmr;      /* dma mode reg             */
+    volatile unsigned long      idma2_sapr;     /* dma source addr ptr      */
+    volatile unsigned long      idma2_dapr;     /* dma destination addr ptr */
+    volatile unsigned long      idma2_bcr;      /* dma byte count reg       */
+    volatile unsigned char      idma2_fcr;      /* function code reg        */
+    volatile unsigned char      RESERVED24;     /* Reserved area            */
+    volatile unsigned char      idma2_cmar;     /* channel mask reg         */
+    volatile unsigned char      RESERVED25;     /* Reserved area            */
+    volatile unsigned char      idma2_csr;      /* channel status reg       */
+    volatile unsigned char      RESERVED26[0x7];        /* Reserved area    */
+    /* Interrupt Controller */
+    volatile unsigned long      intr_cicr;      /* CP interrupt configuration reg*/
+    volatile unsigned long      intr_cipr;      /* CP interrupt pending reg */
+    volatile unsigned long      intr_cimr;      /* CP interrupt mask reg    */
+    volatile unsigned long      intr_cisr;      /* CP interrupt in service reg*/
+    /* Parallel I/O */
+    volatile unsigned short     pio_padir;      /* port A data direction reg */
+    volatile unsigned short     pio_papar;      /* port A pin assignment reg */
+    volatile unsigned short     pio_paodr;      /* port A open drain reg    */
+    volatile unsigned short     pio_padat;      /* port A data register     */
+    volatile unsigned char      RESERVED28[0x8];        /* Reserved area    */
+    volatile unsigned short     pio_pcdir;      /* port C data direction reg*/
+    volatile unsigned short     pio_pcpar;      /* port C pin assignment reg*/
+    volatile unsigned short     pio_pcso;       /* port C special options   */
+    volatile unsigned short     pio_pcdat;      /* port C data register     */
+    volatile unsigned short     pio_pcint;      /* port C interrupt cntrl reg */
+    volatile unsigned char      RESERVED29[0x16];       /* Reserved area    */
+    /* Timer */
+    volatile unsigned short     timer_tgcr;     /* timer global configuration reg */
+    volatile unsigned char      RESERVED30[0xe];        /* Reserved area    */
+    volatile unsigned short     timer_tmr1;     /* timer 1 mode reg         */
+    volatile unsigned short     timer_tmr2;     /* timer 2 mode reg         */
+    volatile unsigned short     timer_trr1;     /* timer 1 referance reg    */
+    volatile unsigned short     timer_trr2;     /* timer 2 referance reg    */
+    volatile unsigned short     timer_tcr1;     /* timer 1 capture reg      */
+    volatile unsigned short     timer_tcr2;     /* timer 2 capture reg      */
+    volatile unsigned short     timer_tcn1;     /* timer 1 counter reg      */
+    volatile unsigned short     timer_tcn2;     /* timer 2 counter reg      */
+    volatile unsigned short     timer_tmr3;     /* timer 3 mode reg         */
+    volatile unsigned short     timer_tmr4;     /* timer 4 mode reg         */
+    volatile unsigned short     timer_trr3;     /* timer 3 referance reg    */
+    volatile unsigned short     timer_trr4;     /* timer 4 referance reg    */
+    volatile unsigned short     timer_tcr3;     /* timer 3 capture reg      */
+    volatile unsigned short     timer_tcr4;     /* timer 4 capture reg      */
+    volatile unsigned short     timer_tcn3;     /* timer 3 counter reg      */
+    volatile unsigned short     timer_tcn4;     /* timer 4 counter reg      */
+    volatile unsigned short     timer_ter1;     /* timer 1 event reg        */
+    volatile unsigned short     timer_ter2;     /* timer 2 event reg        */
+    volatile unsigned short     timer_ter3;     /* timer 3 event reg        */
+    volatile unsigned short     timer_ter4;     /* timer 4 event reg        */
+    volatile unsigned char      RESERVED34[0x8];        /* Reserved area    */
+    /* CP */
+    volatile unsigned short     cp_cr;          /* command register         */
+    volatile unsigned char      RESERVED35[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rccr;        /* main configuration reg   */
+    volatile unsigned char      RESERVED37;     /* Reserved area            */
+    volatile unsigned char      cp_rmds;        /* development support status reg */
+    volatile unsigned long      cp_rmdr;        /* development support control reg */
+    volatile unsigned short     cp_rctr1;       /* ram break register 1     */
+    volatile unsigned short     cp_rctr2;       /* ram break register 2     */
+    volatile unsigned short     cp_rctr3;       /* ram break register 3     */
+    volatile unsigned short     cp_rctr4;       /* ram break register 4     */
+    volatile unsigned char      RESERVED59[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rter;        /* RISC timers event reg    */
+    volatile unsigned char      RESERVED38[0x2];        /* Reserved area    */
+    volatile unsigned short     cp_rtmr;        /* RISC timers mask reg     */
+    volatile unsigned char      RESERVED39[0x14];       /* Reserved area    */
+    /* BRG */
+    union {
+        volatile unsigned long l;
+        struct {
+            volatile unsigned short BRGC_RESERV:14;
+            volatile unsigned short rst:1;
+            volatile unsigned short en:1;
+            volatile unsigned short extc:2;
+            volatile unsigned short atb:1;
+            volatile unsigned short cd:12;
+            volatile unsigned short div16:1;
+        } b;
+    } brgc[4];                                  /* BRG1-BRG4 configuration regs*/
+    /* SCC registers */
+    struct scc_regs {
+        union {
+            struct {
+                /* Low word. */
+                volatile unsigned short GSMR_RESERV2:1;
+                volatile unsigned short edge:2;
+                volatile unsigned short tci:1;
+                volatile unsigned short tsnc:2;
+                volatile unsigned short rinv:1;
+                volatile unsigned short tinv:1;
+                volatile unsigned short tpl:3;
+                volatile unsigned short tpp:2;
+                volatile unsigned short tend:1;
+                volatile unsigned short tdcr:2;
+                volatile unsigned short rdcr:2;
+                volatile unsigned short renc:3;
+                volatile unsigned short tenc:3;
+                volatile unsigned short diag:2;
+                volatile unsigned short enr:1;
+                volatile unsigned short ent:1;
+                volatile unsigned short mode:4;
+                /* High word. */
+                volatile unsigned short GSMR_RESERV1:14;
+                volatile unsigned short pri:1;
+                volatile unsigned short gde:1;
+                volatile unsigned short tcrc:2;
+                volatile unsigned short revd:1;
+                volatile unsigned short trx:1;
+                volatile unsigned short ttx:1;
+                volatile unsigned short cdp:1;
+                volatile unsigned short ctsp:1;
+                volatile unsigned short cds:1;
+                volatile unsigned short ctss:1;
+                volatile unsigned short tfl:1;
+                volatile unsigned short rfw:1;
+                volatile unsigned short txsy:1;
+                volatile unsigned short synl:2;
+                volatile unsigned short rtsm:1;
+                volatile unsigned short rsyn:1;
+            } b;
+            struct {
+                volatile unsigned long low;
+                volatile unsigned long high;
+            } w;
+        } scc_gsmr;                         /* SCC general mode reg         */
+        volatile unsigned short scc_psmr;   /* protocol specific mode reg   */
+        volatile unsigned char  RESERVED42[0x2]; /* Reserved area           */
+        volatile unsigned short scc_todr; /* SCC transmit on demand         */
+        volatile unsigned short scc_dsr;        /* SCC data sync reg        */
+        volatile unsigned short scc_scce;       /* SCC event reg            */
+        volatile unsigned char  RESERVED43[0x2];/* Reserved area            */
+        volatile unsigned short scc_sccm;       /* SCC mask reg             */
+        volatile unsigned char  RESERVED44[0x1];/* Reserved area            */
+        volatile unsigned char  scc_sccs;       /* SCC status reg           */
+        volatile unsigned char  RESERVED45[0x8]; /* Reserved area           */
+    } scc_regs[4];
+    /* SMC */
+    struct smc_regs {
+        volatile unsigned char  RESERVED46[0x2]; /* Reserved area           */
+        volatile unsigned short smc_smcmr;       /* SMC mode reg            */
+        volatile unsigned char  RESERVED60[0x2]; /* Reserved area           */
+        volatile unsigned char  smc_smce;        /* SMC event reg           */
+        volatile unsigned char  RESERVED47[0x3]; /* Reserved area           */
+        volatile unsigned char  smc_smcm;        /* SMC mask reg            */
+        volatile unsigned char  RESERVED48[0x5]; /* Reserved area           */
+    } smc_regs[2];
+    /* SPI */
+    volatile unsigned short     spi_spmode;     /* SPI mode reg             */
+    volatile unsigned char      RESERVED51[0x4];        /* Reserved area    */
+    volatile unsigned char      spi_spie;       /* SPI event reg            */
+    volatile unsigned char      RESERVED52[0x3];        /* Reserved area    */
+    volatile unsigned char      spi_spim;       /* SPI mask reg             */
+    volatile unsigned char      RESERVED53[0x2];        /* Reserved area    */
+    volatile unsigned char      spi_spcom;      /* SPI command reg          */
+    volatile unsigned char      RESERVED54[0x4];        /* Reserved area    */
+    /* PIP */
+    volatile unsigned short     pip_pipc;       /* pip configuration reg    */
+    volatile unsigned char      RESERVED65[0x2];        /* Reserved area    */
+    volatile unsigned short     pip_ptpr;       /* pip timing parameters reg */
+    volatile unsigned long      pip_pbdir;      /* port b data direction reg */
+    volatile unsigned long      pip_pbpar;      /* port b pin assignment reg */
+    volatile unsigned long      pip_pbodr;      /* port b open drain reg    */
+    volatile unsigned long      pip_pbdat;      /* port b data reg          */
+    volatile unsigned char      RESERVED71[0x18];       /* Reserved area    */
+    /* Serial Interface */
+    volatile unsigned long      si_simode;      /* SI mode register         */
+    volatile unsigned char      si_sigmr;       /* SI global mode register  */
+    volatile unsigned char      RESERVED55;     /* Reserved area            */
+    volatile unsigned char      si_sistr;       /* SI status register       */
+    volatile unsigned char      si_sicmr;       /* SI command register      */
+    volatile unsigned char      RESERVED56[0x4]; /* Reserved area           */
+    volatile unsigned long      si_sicr;        /* SI clock routing         */
+    volatile unsigned long      si_sirp;        /* SI ram pointers          */
+    volatile unsigned char      RESERVED57[0xc]; /* Reserved area           */
+    volatile unsigned short     si_siram[0x80]; /* SI routing ram          */
+} QUICC;
+
+#endif
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 4
+ * End:
+ */
diff --git a/arch/m68k/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h
new file mode 100644
index 000000000000..d57217ca4f27
--- /dev/null
+++ b/arch/m68k/include/asm/m68360_regs.h
@@ -0,0 +1,408 @@
+/***********************************
+ * $Id: m68360_regs.h,v 1.2 2002/10/26 15:03:55 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Definitions of the QUICC registers
+ ***************************************
+ */
+
+#ifndef __REGISTERS_H
+#define __REGISTERS_H
+
+#define CLEAR_BIT(x, bit)  x =bit 
+
+/*****************************************************************
+        Command Register
+*****************************************************************/
+
+/* bit fields within command register */
+#define SOFTWARE_RESET  0x8000
+#define CMD_OPCODE      0x0f00
+#define CMD_CHANNEL     0x00f0
+#define CMD_FLAG        0x0001
+
+/* general command opcodes */
+#define INIT_RXTX_PARAMS        0x0000
+#define INIT_RX_PARAMS          0x0100
+#define INIT_TX_PARAMS          0x0200
+#define ENTER_HUNT_MODE         0x0300
+#define STOP_TX                 0x0400
+#define GR_STOP_TX              0x0500
+#define RESTART_TX              0x0600
+#define CLOSE_RX_BD             0x0700
+#define SET_ENET_GROUP          0x0800
+#define RESET_ENET_GROUP        0x0900
+
+/* quicc32 CP commands */
+#define STOP_TX_32              0x0e00  /*add chan# bits 2-6 */
+#define ENTER_HUNT_MODE_32      0x1e00
+
+/* quicc32 mask/event SCC register */
+#define GOV     0x01
+#define GUN     0x02
+#define GINT    0x04
+#define IQOV    0x08
+
+
+/* Timer commands */
+#define SET_TIMER               0x0800
+
+/* Multi channel Interrupt structure */
+#define INTR_VALID      0x8000  /* Valid interrupt entry */
+#define INTR_WRAP       0x4000  /* Wrap bit in the interrupt entry table */
+#define INTR_CH_NU      0x07c0  /* Channel Num in interrupt table */
+#define INTR_MASK_BITS  0x383f
+
+/*
+ * General SCC mode register (GSMR)
+ */
+
+#define MODE_HDLC               0x0
+#define MODE_APPLE_TALK         0x2
+#define MODE_SS7                0x3
+#define MODE_UART               0x4
+#define MODE_PROFIBUS           0x5
+#define MODE_ASYNC_HDLC         0x6
+#define MODE_V14                0x7
+#define MODE_BISYNC             0x8
+#define MODE_DDCMP              0x9
+#define MODE_MULTI_CHANNEL      0xa
+#define MODE_ETHERNET           0xc
+
+#define DIAG_NORMAL             0x0
+#define DIAG_LOCAL_LPB          0x1
+#define DIAG_AUTO_ECHO          0x2
+#define DIAG_LBP_ECHO           0x3
+
+/* For RENC and TENC fields in GSMR */
+#define ENC_NRZ                 0x0
+#define ENC_NRZI                0x1
+#define ENC_FM0                 0x2
+#define ENC_MANCH               0x4
+#define ENC_DIFF_MANC           0x6
+
+/* For TDCR and RDCR fields in GSMR */
+#define CLOCK_RATE_1            0x0
+#define CLOCK_RATE_8            0x1
+#define CLOCK_RATE_16           0x2
+#define CLOCK_RATE_32           0x3
+
+#define TPP_00                  0x0
+#define TPP_10                  0x1
+#define TPP_01                  0x2
+#define TPP_11                  0x3
+
+#define TPL_NO                  0x0
+#define TPL_8                   0x1
+#define TPL_16                  0x2
+#define TPL_32                  0x3
+#define TPL_48                  0x4
+#define TPL_64                  0x5
+#define TPL_128                 0x6
+
+#define TSNC_INFINITE           0x0
+#define TSNC_14_65              0x1
+#define TSNC_4_15               0x2
+#define TSNC_3_1                0x3
+
+#define EDGE_BOTH               0x0
+#define EDGE_POS                0x1
+#define EDGE_NEG                0x2
+#define EDGE_NO                 0x3
+
+#define SYNL_NO                 0x0
+#define SYNL_4                  0x1
+#define SYNL_8                  0x2
+#define SYNL_16                 0x3
+
+#define TCRC_CCITT16            0x0
+#define TCRC_CRC16              0x1
+#define TCRC_CCITT32            0x2
+
+
+/*****************************************************************
+        TODR (Transmit on demand) Register
+*****************************************************************/
+#define TODR_TOD        0x8000  /* Transmit on demand */
+
+
+/*****************************************************************
+        CICR register settings
+*****************************************************************/
+
+/* note that relative irq priorities of the SCCs can be reordered
+ * if desired - see p. 7-377 of the MC68360UM */
+#define CICR_SCA_SCC1           ((uint)0x00000000)      /* SCC1 @ SCCa */
+#define CICR_SCB_SCC2           ((uint)0x00040000)      /* SCC2 @ SCCb */
+#define CICR_SCC_SCC3           ((uint)0x00200000)      /* SCC3 @ SCCc */
+#define CICR_SCD_SCC4           ((uint)0x00c00000)      /* SCC4 @ SCCd */
+
+#define CICR_IRL_MASK           ((uint)0x0000e000)      /* Core interrupt */
+#define CICR_HP_MASK            ((uint)0x00001f00)      /* Hi-pri int. */
+#define CICR_VBA_MASK           ((uint)0x000000e0)      /* Vector Base Address */
+#define CICR_SPS                ((uint)0x00000001)      /* SCC Spread */
+
+
+/*****************************************************************
+       Interrupt bits for CIPR and CIMR (MC68360UM p. 7-379)
+*****************************************************************/
+
+#define INTR_PIO_PC0    0x80000000      /* parallel I/O C bit 0 */
+#define INTR_SCC1       0x40000000      /* SCC port 1 */
+#define INTR_SCC2       0x20000000      /* SCC port 2 */
+#define INTR_SCC3       0x10000000      /* SCC port 3 */
+#define INTR_SCC4       0x08000000      /* SCC port 4 */
+#define INTR_PIO_PC1    0x04000000      /* parallel i/o C bit 1 */
+#define INTR_TIMER1     0x02000000      /* timer 1 */
+#define INTR_PIO_PC2    0x01000000      /* parallel i/o C bit 2 */
+#define INTR_PIO_PC3    0x00800000      /* parallel i/o C bit 3 */
+#define INTR_SDMA_BERR  0x00400000      /* SDMA channel bus error */
+#define INTR_DMA1       0x00200000      /* idma 1 */
+#define INTR_DMA2       0x00100000      /* idma 2 */
+#define INTR_TIMER2     0x00040000      /* timer 2 */
+#define INTR_CP_TIMER   0x00020000      /* CP timer */
+#define INTR_PIP_STATUS 0x00010000      /* PIP status */
+#define INTR_PIO_PC4    0x00008000      /* parallel i/o C bit 4 */
+#define INTR_PIO_PC5    0x00004000      /* parallel i/o C bit 5 */
+#define INTR_TIMER3     0x00001000      /* timer 3 */
+#define INTR_PIO_PC6    0x00000800      /* parallel i/o C bit 6 */
+#define INTR_PIO_PC7    0x00000400      /* parallel i/o C bit 7 */
+#define INTR_PIO_PC8    0x00000200      /* parallel i/o C bit 8 */
+#define INTR_TIMER4     0x00000080      /* timer 4 */
+#define INTR_PIO_PC9    0x00000040      /* parallel i/o C bit 9 */
+#define INTR_SCP        0x00000020      /* SCP */
+#define INTR_SMC1       0x00000010      /* SMC 1 */
+#define INTR_SMC2       0x00000008      /* SMC 2 */
+#define INTR_PIO_PC10   0x00000004      /* parallel i/o C bit 10 */
+#define INTR_PIO_PC11   0x00000002      /* parallel i/o C bit 11 */
+#define INTR_ERR        0x00000001      /* error */
+
+
+/*****************************************************************
+        CPM Interrupt vector encodings (MC68360UM p. 7-376)
+*****************************************************************/
+
+#define CPMVEC_NR               32
+#define CPMVEC_PIO_PC0          0x1f
+#define CPMVEC_SCC1             0x1e
+#define CPMVEC_SCC2             0x1d
+#define CPMVEC_SCC3             0x1c
+#define CPMVEC_SCC4             0x1b
+#define CPMVEC_PIO_PC1          0x1a
+#define CPMVEC_TIMER1           0x19
+#define CPMVEC_PIO_PC2          0x18
+#define CPMVEC_PIO_PC3          0x17
+#define CPMVEC_SDMA_CB_ERR      0x16
+#define CPMVEC_IDMA1            0x15
+#define CPMVEC_IDMA2            0x14
+#define CPMVEC_RESERVED3        0x13
+#define CPMVEC_TIMER2           0x12
+#define CPMVEC_RISCTIMER        0x11
+#define CPMVEC_RESERVED2        0x10
+#define CPMVEC_PIO_PC4          0x0f
+#define CPMVEC_PIO_PC5          0x0e
+#define CPMVEC_TIMER3           0x0c
+#define CPMVEC_PIO_PC6          0x0b
+#define CPMVEC_PIO_PC7          0x0a
+#define CPMVEC_PIO_PC8          0x09
+#define CPMVEC_RESERVED1        0x08
+#define CPMVEC_TIMER4           0x07
+#define CPMVEC_PIO_PC9          0x06
+#define CPMVEC_SPI              0x05
+#define CPMVEC_SMC1             0x04
+#define CPMVEC_SMC2             0x03
+#define CPMVEC_PIO_PC10         0x02
+#define CPMVEC_PIO_PC11         0x01
+#define CPMVEC_ERROR            0x00
+
+/* #define CPMVEC_PIO_PC0               ((ushort)0x1f) */
+/* #define CPMVEC_SCC1          ((ushort)0x1e) */
+/* #define CPMVEC_SCC2          ((ushort)0x1d) */
+/* #define CPMVEC_SCC3          ((ushort)0x1c) */
+/* #define CPMVEC_SCC4          ((ushort)0x1b) */
+/* #define CPMVEC_PIO_PC1               ((ushort)0x1a) */
+/* #define CPMVEC_TIMER1                ((ushort)0x19) */
+/* #define CPMVEC_PIO_PC2               ((ushort)0x18) */
+/* #define CPMVEC_PIO_PC3               ((ushort)0x17) */
+/* #define CPMVEC_SDMA_CB_ERR   ((ushort)0x16) */
+/* #define CPMVEC_IDMA1         ((ushort)0x15) */
+/* #define CPMVEC_IDMA2         ((ushort)0x14) */
+/* #define CPMVEC_RESERVED3     ((ushort)0x13) */
+/* #define CPMVEC_TIMER2                ((ushort)0x12) */
+/* #define CPMVEC_RISCTIMER     ((ushort)0x11) */
+/* #define CPMVEC_RESERVED2     ((ushort)0x10) */
+/* #define CPMVEC_PIO_PC4               ((ushort)0x0f) */
+/* #define CPMVEC_PIO_PC5               ((ushort)0x0e) */
+/* #define CPMVEC_TIMER3                ((ushort)0x0c) */
+/* #define CPMVEC_PIO_PC6               ((ushort)0x0b) */
+/* #define CPMVEC_PIO_PC7               ((ushort)0x0a) */
+/* #define CPMVEC_PIO_PC8               ((ushort)0x09) */
+/* #define CPMVEC_RESERVED1     ((ushort)0x08) */
+/* #define CPMVEC_TIMER4                ((ushort)0x07) */
+/* #define CPMVEC_PIO_PC9               ((ushort)0x06) */
+/* #define CPMVEC_SPI           ((ushort)0x05) */
+/* #define CPMVEC_SMC1          ((ushort)0x04) */
+/* #define CPMVEC_SMC2          ((ushort)0x03) */
+/* #define CPMVEC_PIO_PC10              ((ushort)0x02) */
+/* #define CPMVEC_PIO_PC11              ((ushort)0x01) */
+/* #define CPMVEC_ERROR         ((ushort)0x00) */
+
+
+/*****************************************************************
+ *        PIO control registers
+ *****************************************************************/
+
+/* Port A - See 360UM p. 7-358
+ * 
+ *  Note that most of these pins have alternate functions
+ */
+
+
+/* The macros are nice, but there are all sorts of references to 1-indexed
+ * facilities on the 68360... */
+/* #define PA_RXD(n)    ((ushort)(0x01<<(2*n))) */
+/* #define PA_TXD(n)    ((ushort)(0x02<<(2*n))) */
+
+#define PA_RXD1         ((ushort)0x0001)
+#define PA_TXD1         ((ushort)0x0002)
+#define PA_RXD2         ((ushort)0x0004)
+#define PA_TXD2         ((ushort)0x0008)
+#define PA_RXD3         ((ushort)0x0010)
+#define PA_TXD3         ((ushort)0x0020)
+#define PA_RXD4         ((ushort)0x0040)
+#define PA_TXD4         ((ushort)0x0080)
+
+#define PA_CLK1         ((ushort)0x0100)
+#define PA_CLK2         ((ushort)0x0200)
+#define PA_CLK3         ((ushort)0x0400)
+#define PA_CLK4         ((ushort)0x0800)
+#define PA_CLK5         ((ushort)0x1000)
+#define PA_CLK6         ((ushort)0x2000)
+#define PA_CLK7         ((ushort)0x4000)
+#define PA_CLK8         ((ushort)0x8000)
+
+
+/* Port B - See 360UM p. 7-362
+ */
+
+
+/* Port C - See 360UM p. 7-365
+ */
+
+#define PC_RTS1         ((ushort)0x0001)
+#define PC_RTS2         ((ushort)0x0002)
+#define PC__RTS3        ((ushort)0x0004) /* !RTS3 */
+#define PC__RTS4        ((ushort)0x0008) /* !RTS4 */
+
+#define PC_CTS1         ((ushort)0x0010)
+#define PC_CD1          ((ushort)0x0020)
+#define PC_CTS2         ((ushort)0x0040)
+#define PC_CD2          ((ushort)0x0080)
+#define PC_CTS3         ((ushort)0x0100)
+#define PC_CD3          ((ushort)0x0200)
+#define PC_CTS4         ((ushort)0x0400)
+#define PC_CD4          ((ushort)0x0800)
+
+
+
+/*****************************************************************
+        chip select option register
+*****************************************************************/
+#define DTACK           0xe000
+#define ADR_MASK        0x1ffc
+#define RDWR_MASK       0x0002
+#define FC_MASK         0x0001
+
+/*****************************************************************
+        tbase and rbase registers
+*****************************************************************/
+#define TBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbase))
+#define RBD_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbase))
+#define TBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->tbptr))
+#define RBD_CUR_ADDR(quicc,pram) ((struct quicc_bd *) \
+    (quicc->ch_or_u.u.udata_bd_ucode + pram->rbptr))
+#define TBD_SET_CUR_ADDR(bd,quicc,pram) pram->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define RBD_SET_CUR_ADDR(bd,quicc,pram) pram->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(quicc->ch_or_u.u.udata_bd_ucode)))
+#define INCREASE_TBD(bd,quicc,pram) {  \
+    if((bd)->status & T_W)             \
+        (bd) = TBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_TBD(bd,quicc,pram) {  \
+    if ((bd) == TBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+#define INCREASE_RBD(bd,quicc,pram) {  \
+    if((bd)->status & R_W)             \
+        (bd) = RBD_ADDR(quicc,pram);   \
+    else                               \
+        (bd)++;                        \
+}
+#define DECREASE_RBD(bd,quicc,pram) {  \
+    if ((bd) == RBD_ADDR(quicc, pram)) \
+        while (!((bd)->status & T_W))  \
+            (bd)++;                    \
+    else                               \
+        (bd)--;                        \
+}
+
+/*****************************************************************
+        Macros for Multi channel
+*****************************************************************/
+#define QMC_BASE(quicc,page) (struct global_multi_pram *)(&quicc->pram[page])
+#define MCBASE(quicc,page) (unsigned long)(quicc->pram[page].m.mcbase)
+#define CHANNEL_PRAM_BASE(quicc,channel) ((struct quicc32_pram *) \
+                (&(quicc->ch_or_u.ch_pram_tbl[channel])))
+#define TBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbase)))
+#define RBD_32_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbase)))
+#define TBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->tbptr)))
+#define RBD_32_CUR_ADDR(quicc,page,channel) ((struct quicc_bd *) \
+    (MCBASE(quicc,page) + (CHANNEL_PRAM_BASE(quicc,channel)->rbptr)))
+#define TBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->tbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+#define RBD_32_SET_CUR_ADDR(bd,quicc,page,channel) \
+     CHANNEL_PRAM_BASE(quicc,channel)->rbptr = \
+    ((unsigned short)((char *)(bd) - (char *)(MCBASE(quicc,page))))
+
+#define INCREASE_TBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & T_W)                        \
+        (bd) = TBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_TBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == TBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+#define INCREASE_RBD_32(bd,quicc,page,channel) {  \
+    if((bd)->status & R_W)                        \
+        (bd) = RBD_32_ADDR(quicc,page,channel);   \
+    else                                          \
+        (bd)++;                                   \
+}
+#define DECREASE_RBD_32(bd,quicc,page,channel) {  \
+    if ((bd) == RBD_32_ADDR(quicc, page,channel)) \
+        while (!((bd)->status & T_W))             \
+            (bd)++;                               \
+    else                                          \
+        (bd)--;                                   \
+}
+
+#endif
diff --git a/arch/m68k/include/asm/mac_asc.h b/arch/m68k/include/asm/mac_asc.h
new file mode 100644
index 000000000000..fc2e5467b41e
--- /dev/null
+++ b/arch/m68k/include/asm/mac_asc.h
@@ -0,0 +1,27 @@
+/*
+ *      Apple Sound Chip
+ */
+
+#ifndef __ASM_MAC_ASC_H
+#define __ASM_MAC_ASC_H
+
+/*
+ *      ASC offsets and controls
+ */
+
+#define ASC_BUF_BASE    0x00    /* RAM buffer offset */
+#define ASC_BUF_SIZE    0x800
+
+#define ASC_CONTROL     0x800
+#define ASC_CONTROL_OFF         0x00
+#define ASC_FREQ(chan,byte)     ((0x810)+((chan)<<3)+(byte))
+#define ASC_ENABLE      0x801
+#define ASC_ENABLE_SAMPLE       0x02
+#define ASC_MODE        0x802
+#define ASC_MODE_SAMPLE         0x02
+
+#define ASC_VOLUME      0x806
+#define ASC_CHAN        0x807   /* ??? */
+
+
+#endif
diff --git a/arch/m68k/include/asm/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h
new file mode 100644
index 000000000000..c2a042b8c349
--- /dev/null
+++ b/arch/m68k/include/asm/mac_baboon.h
@@ -0,0 +1,32 @@
+/*
+ * Definitions for the "Baboon" custom IC on the PowerBook 190.
+ */
+
+#define BABOON_BASE (0x50F1A000)        /* same as IDE controller base */
+
+#ifndef __ASSEMBLY__
+
+struct baboon {
+        char    pad1[208];      /* generic IDE registers, not used here */
+        short   mb_control;     /* Control register:
+                                 * bit 5 : slot 2 power control
+                                 * bit 6 : slot 1 power control
+                                 */
+        char    pad2[2];
+        short   mb_status;      /* (0xD4) media bay status register:
+                                 *
+                                 * bit 0: ????
+                                 * bit 1: IDE interrupt active?
+                                 * bit 2: bay status, 0 = full, 1 = empty
+                                 * bit 3: ????
+                                 */
+        char    pad3[2];        /* (0xD6) not used */
+        short   mb_ifr;         /* (0xD8) media bay interrupt flags register:
+                                 *
+                                 * bit 0: ????
+                                 * bit 1: IDE controller interrupt
+                                 * bit 2: media bay status change interrupt
+                                 */
+};
+
+#endif /* __ASSEMBLY **/
diff --git a/arch/m68k/include/asm/mac_iop.h b/arch/m68k/include/asm/mac_iop.h
new file mode 100644
index 000000000000..a2c7e6fcca38
--- /dev/null
+++ b/arch/m68k/include/asm/mac_iop.h
@@ -0,0 +1,162 @@
+/*
+ * I/O Processor (IOP) defines and structures, mostly snagged from A/UX
+ * header files.
+ *
+ * The original header from which this was taken is copyrighted. I've done some
+ * rewriting (in fact my changes make this a bit more readable, IMHO) but some
+ * more should be done.
+ */
+
+/*
+ * This is the base address of the IOPs. Use this as the address of
+ * a "struct iop" (see below) to see where the actual registers fall.
+ */
+
+#define SCC_IOP_BASE_IIFX       (0x50F04000)
+#define ISM_IOP_BASE_IIFX       (0x50F12000)
+
+#define SCC_IOP_BASE_QUADRA     (0x50F0C000)
+#define ISM_IOP_BASE_QUADRA     (0x50F1E000)
+
+/* IOP status/control register bits: */
+
+#define IOP_BYPASS      0x01    /* bypass-mode hardware access */
+#define IOP_AUTOINC     0x02    /* allow autoincrement of ramhi/lo */
+#define IOP_RUN         0x04    /* set to 0 to reset IOP chip */
+#define IOP_IRQ         0x08    /* generate IRQ to IOP if 1 */
+#define IOP_INT0        0x10    /* intr priority from IOP to host */
+#define IOP_INT1        0x20    /* intr priority from IOP to host */
+#define IOP_HWINT       0x40    /* IRQ from hardware; bypass mode only */
+#define IOP_DMAINACTIVE 0x80    /* no DMA request active; bypass mode only */
+
+#define NUM_IOPS        2
+#define NUM_IOP_CHAN    7
+#define NUM_IOP_MSGS    NUM_IOP_CHAN*8
+#define IOP_MSG_LEN     32
+
+/* IOP reference numbers, used by the globally-visible iop_xxx functions */
+
+#define IOP_NUM_SCC     0
+#define IOP_NUM_ISM     1
+
+/* IOP channel states */
+
+#define IOP_MSG_IDLE            0       /* idle                         */
+#define IOP_MSG_NEW             1       /* new message sent             */
+#define IOP_MSG_RCVD            2       /* message received; processing */
+#define IOP_MSG_COMPLETE        3       /* message processing complete  */
+
+/* IOP message status codes */
+
+#define IOP_MSGSTATUS_UNUSED    0       /* Unusued message structure       */
+#define IOP_MSGSTATUS_WAITING   1       /* waiting for channel             */
+#define IOP_MSGSTATUS_SENT      2       /* message sent, awaiting reply    */
+#define IOP_MSGSTATUS_COMPLETE  3       /* message complete and reply rcvd */
+#define IOP_MSGSTATUS_UNSOL     6       /* message is unsolicited          */
+
+/* IOP memory addresses of the members of the mac_iop_kernel structure. */
+
+#define IOP_ADDR_MAX_SEND_CHAN  0x0200
+#define IOP_ADDR_SEND_STATE     0x0201
+#define IOP_ADDR_PATCH_CTRL     0x021F
+#define IOP_ADDR_SEND_MSG       0x0220
+#define IOP_ADDR_MAX_RECV_CHAN  0x0300
+#define IOP_ADDR_RECV_STATE     0x0301
+#define IOP_ADDR_ALIVE          0x031F
+#define IOP_ADDR_RECV_MSG       0x0320
+
+#ifndef __ASSEMBLY__
+
+/*
+ * IOP Control registers, staggered because in usual Apple style they were
+ * too lazy to decode the A0 bit. This structure is assumed to begin at
+ * one of the xxx_IOP_BASE addresses given above.
+ */
+
+struct mac_iop {
+    __u8        ram_addr_hi;    /* shared RAM address hi byte */
+    __u8        pad0;
+    __u8        ram_addr_lo;    /* shared RAM address lo byte */
+    __u8        pad1;
+    __u8        status_ctrl;    /* status/control register */
+    __u8        pad2[3];
+    __u8        ram_data;       /* RAM data byte at ramhi/lo */
+
+    __u8        pad3[23];
+
+    /* Bypass-mode hardware access registers */
+
+    union {
+        struct {                /* SCC registers */
+            __u8 sccb_cmd;      /* SCC B command reg */
+            __u8 pad4;
+            __u8 scca_cmd;      /* SCC A command reg */
+            __u8 pad5;
+            __u8 sccb_data;     /* SCC B data */
+            __u8 pad6;
+            __u8 scca_data;     /* SCC A data */
+        } scc_regs;
+
+        struct {                /* ISM registers */
+            __u8 wdata;         /* write a data byte */
+            __u8 pad7;
+            __u8 wmark;         /* write a mark byte */
+            __u8 pad8;
+            __u8 wcrc;          /* write 2-byte crc to disk */
+            __u8 pad9;
+            __u8 wparams;       /* write the param regs */
+            __u8 pad10;
+            __u8 wphase;        /* write the phase states & dirs */
+            __u8 pad11;
+            __u8 wsetup;        /* write the setup register */
+            __u8 pad12;
+            __u8 wzeroes;       /* mode reg: 1's clr bits, 0's are x */
+            __u8 pad13;
+            __u8 wones;         /* mode reg: 1's set bits, 0's are x */
+            __u8 pad14;
+            __u8 rdata;         /* read a data byte */
+            __u8 pad15;
+            __u8 rmark;         /* read a mark byte */
+            __u8 pad16;
+            __u8 rerror;        /* read the error register */
+            __u8 pad17;
+            __u8 rparams;       /* read the param regs */
+            __u8 pad18;
+            __u8 rphase;        /* read the phase states & dirs */
+            __u8 pad19;
+            __u8 rsetup;        /* read the setup register */
+            __u8 pad20;
+            __u8 rmode;         /* read the mode register */
+            __u8 pad21;
+            __u8 rhandshake;    /* read the handshake register */
+        } ism_regs;
+    } b;
+};
+
+/* This structure is used to track IOP messages in the Linux kernel */
+
+struct iop_msg {
+        struct iop_msg  *next;          /* next message in queue or NULL     */
+        uint    iop_num;                /* IOP number                        */
+        uint    channel;                /* channel number                    */
+        void    *caller_priv;           /* caller private data               */
+        int     status;                 /* status of this message            */
+        __u8    message[IOP_MSG_LEN];   /* the message being sent/received   */
+        __u8    reply[IOP_MSG_LEN];     /* the reply to the message          */
+        void    (*handler)(struct iop_msg *);
+                                        /* function to call when reply recvd */
+};
+
+extern int iop_scc_present,iop_ism_present;
+
+extern int iop_listen(uint, uint,
+                        void (*handler)(struct iop_msg *),
+                        const char *);
+extern int iop_send_message(uint, uint, void *, uint, __u8 *,
+                            void (*)(struct iop_msg *));
+extern void iop_complete_message(struct iop_msg *);
+extern void iop_upload_code(uint, __u8 *, uint, __u16);
+extern void iop_download_code(uint, __u8 *, uint, __u16);
+extern __u8 *iop_compare_code(uint, __u8 *, uint, __u16);
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h
new file mode 100644
index 000000000000..39a5c292eaee
--- /dev/null
+++ b/arch/m68k/include/asm/mac_mouse.h
@@ -0,0 +1,23 @@
+#ifndef _ASM_MAC_MOUSE_H
+#define _ASM_MAC_MOUSE_H
+
+/*
+ * linux/include/asm-m68k/mac_mouse.h
+ * header file for Macintosh ADB mouse driver
+ * 27-10-97 Michael Schmitz
+ * copied from:
+ * header file for Atari Mouse driver
+ * by Robert de Vries (robert@and.nl) on 19Jul93
+ */
+
+struct mouse_status {
+        char            buttons;
+        short           dx;
+        short           dy;
+        int             ready;
+        int             active;
+        wait_queue_head_t wait;
+        struct fasync_struct *fasyncptr;
+};
+
+#endif
diff --git a/arch/m68k/include/asm/mac_oss.h b/arch/m68k/include/asm/mac_oss.h
new file mode 100644
index 000000000000..7221f7251934
--- /dev/null
+++ b/arch/m68k/include/asm/mac_oss.h
@@ -0,0 +1,94 @@
+/*
+ *      OSS
+ *
+ *      This is used in place of VIA2 on the IIfx.
+ */
+
+#define OSS_BASE        (0x50f1a000)
+
+/*
+ * Interrupt level offsets for mac_oss->irq_level
+ */
+
+#define OSS_NUBUS0      0
+#define OSS_NUBUS1      1
+#define OSS_NUBUS2      2
+#define OSS_NUBUS3      3
+#define OSS_NUBUS4      4
+#define OSS_NUBUS5      5
+#define OSS_IOPISM      6
+#define OSS_IOPSCC      7
+#define OSS_SOUND       8
+#define OSS_SCSI        9
+#define OSS_60HZ        10
+#define OSS_VIA1        11
+#define OSS_UNUSED1     12
+#define OSS_UNUSED2     13
+#define OSS_PARITY      14
+#define OSS_UNUSED3     15
+
+#define OSS_NUM_SOURCES 16
+
+/*
+ * Pending interrupt bits in mac_oss->irq_pending
+ */
+
+#define OSS_IP_NUBUS0   0x0001
+#define OSS_IP_NUBUS1   0x0002
+#define OSS_IP_NUBUS2   0x0004
+#define OSS_IP_NUBUS3   0x0008
+#define OSS_IP_NUBUS4   0x0010
+#define OSS_IP_NUBUS5   0x0020
+#define OSS_IP_IOPISM   0x0040
+#define OSS_IP_IOPSCC   0x0080
+#define OSS_IP_SOUND    0x0100
+#define OSS_IP_SCSI     0x0200
+#define OSS_IP_60HZ     0x0400
+#define OSS_IP_VIA1     0x0800
+#define OSS_IP_UNUSED1  0x1000
+#define OSS_IP_UNUSED2  0x2000
+#define OSS_IP_PARITY   0x4000
+#define OSS_IP_UNUSED3  0x8000
+
+#define OSS_IP_NUBUS (OSS_IP_NUBUS0|OSS_IP_NUBUS1|OSS_IP_NUBUS2|OSS_IP_NUBUS3|OSS_IP_NUBUS4|OSS_IP_NUBUS5)
+
+/*
+ * Rom Control Register
+ */
+
+#define OSS_POWEROFF    0x80
+
+/*
+ * OSS Interrupt levels for various sub-systems
+ *
+ * This mapping is layed out with two things in mind: first, we try to keep
+ * things on their own levels to avoid having to do double-dispatches. Second,
+ * the levels match as closely as possible the alternate IRQ mapping mode (aka
+ * "A/UX mode") available on some VIA machines.
+ */
+
+#define OSS_IRQLEV_DISABLED     0
+#define OSS_IRQLEV_IOPISM       1       /* ADB? */
+#define OSS_IRQLEV_SCSI         IRQ_AUTO_2
+#define OSS_IRQLEV_NUBUS        IRQ_AUTO_3      /* keep this on its own level */
+#define OSS_IRQLEV_IOPSCC       IRQ_AUTO_4      /* matches VIA alternate mapping */
+#define OSS_IRQLEV_SOUND        IRQ_AUTO_5      /* matches VIA alternate mapping */
+#define OSS_IRQLEV_60HZ         6       /* matches VIA alternate mapping */
+#define OSS_IRQLEV_VIA1         IRQ_AUTO_6      /* matches VIA alternate mapping */
+#define OSS_IRQLEV_PARITY       7       /* matches VIA alternate mapping */
+
+#ifndef __ASSEMBLY__
+
+struct mac_oss {
+    __u8  irq_level[0x10];      /* [0x000-0x00f] Interrupt levels */
+    __u8  padding0[0x1F2];      /* [0x010-0x201] IO space filler */
+    __u16 irq_pending;          /* [0x202-0x203] pending interrupts bits */
+    __u8  rom_ctrl;             /* [0x204-0x204] ROM cntl reg (for poweroff) */
+    __u8  padding1[0x2];        /* [0x205-0x206] currently unused by A/UX */
+    __u8  ack_60hz;             /* [0x207-0x207] 60 Hz ack. */
+};
+
+extern volatile struct mac_oss *oss;
+extern int oss_present;
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/mac_psc.h b/arch/m68k/include/asm/mac_psc.h
new file mode 100644
index 000000000000..7808bb0b2323
--- /dev/null
+++ b/arch/m68k/include/asm/mac_psc.h
@@ -0,0 +1,248 @@
+/*
+ * Apple Peripheral System Controller (PSC)
+ *
+ * The PSC is used on the AV Macs to control IO functions not handled
+ * by the VIAs (Ethernet, DSP, SCC, Sound). This includes nine DMA
+ * channels.
+ *
+ * The first seven DMA channels appear to be "one-shot" and are actually
+ * sets of two channels; one member is active while the other is being
+ * configured, and then you flip the active member and start all over again.
+ * The one-shot channels are grouped together and are:
+ *
+ * 1. SCSI
+ * 2. Ethernet Read
+ * 3. Ethernet Write
+ * 4. Floppy Disk Controller
+ * 5. SCC Channel A Receive
+ * 6. SCC Channel B Receive
+ * 7. SCC Channel A Transmit
+ *
+ * The remaining two channels are handled somewhat differently. They appear
+ * to be closely tied and share one set of registers. They also seem to run
+ * continuously, although how you keep the buffer filled in this scenario is
+ * not understood as there seems to be only one input and one output buffer
+ * pointer.
+ *
+ * Much of this was extrapolated from what was known about the Ethernet
+ * registers and subsequently confirmed using MacsBug (ie by pinging the
+ * machine with easy-to-find patterns and looking for them in the DMA
+ * buffers, or by sending a file over the serial ports and finding the
+ * file in the buffers.)
+ *
+ * 1999-05-25 (jmt)
+ */
+
+#define PSC_BASE        (0x50F31000)
+
+/*
+ * The IER/IFR registers work like the VIA, except that it has 4
+ * of them each on different interrupt levels, and each register
+ * set only seems to handle four interrupts instead of seven.
+ *
+ * To access a particular set of registers, add 0xn0 to the base
+ * where n = 3,4,5 or 6.
+ */
+
+#define pIFRbase        0x100
+#define pIERbase        0x104
+
+/*
+ * One-shot DMA control registers
+ */
+
+#define PSC_MYSTERY     0x804
+
+#define PSC_CTL_BASE    0xC00
+
+#define PSC_SCSI_CTL    0xC00
+#define PSC_ENETRD_CTL  0xC10
+#define PSC_ENETWR_CTL  0xC20
+#define PSC_FDC_CTL     0xC30
+#define PSC_SCCA_CTL    0xC40
+#define PSC_SCCB_CTL    0xC50
+#define PSC_SCCATX_CTL  0xC60
+
+/*
+ * DMA channels. Add +0x10 for the second channel in the set.
+ * You're supposed to use one channel while the other runs and
+ * then flip channels and do the whole thing again.
+ */
+
+#define PSC_ADDR_BASE   0x1000
+#define PSC_LEN_BASE    0x1004
+#define PSC_CMD_BASE    0x1008
+
+#define PSC_SET0        0x00
+#define PSC_SET1        0x10
+
+#define PSC_SCSI_ADDR   0x1000  /* confirmed */
+#define PSC_SCSI_LEN    0x1004  /* confirmed */
+#define PSC_SCSI_CMD    0x1008  /* confirmed */
+#define PSC_ENETRD_ADDR 0x1020  /* confirmed */
+#define PSC_ENETRD_LEN  0x1024  /* confirmed */
+#define PSC_ENETRD_CMD  0x1028  /* confirmed */
+#define PSC_ENETWR_ADDR 0x1040  /* confirmed */
+#define PSC_ENETWR_LEN  0x1044  /* confirmed */
+#define PSC_ENETWR_CMD  0x1048  /* confirmed */
+#define PSC_FDC_ADDR    0x1060  /* strongly suspected */
+#define PSC_FDC_LEN     0x1064  /* strongly suspected */
+#define PSC_FDC_CMD     0x1068  /* strongly suspected */
+#define PSC_SCCA_ADDR   0x1080  /* confirmed */
+#define PSC_SCCA_LEN    0x1084  /* confirmed */
+#define PSC_SCCA_CMD    0x1088  /* confirmed */
+#define PSC_SCCB_ADDR   0x10A0  /* confirmed */
+#define PSC_SCCB_LEN    0x10A4  /* confirmed */
+#define PSC_SCCB_CMD    0x10A8  /* confirmed */
+#define PSC_SCCATX_ADDR 0x10C0  /* confirmed */
+#define PSC_SCCATX_LEN  0x10C4  /* confirmed */
+#define PSC_SCCATX_CMD  0x10C8  /* confirmed */
+
+/*
+ * Free-running DMA registers. The only part known for sure are the bits in
+ * the control register, the buffer addresses and the buffer length. Everything
+ * else is anybody's guess.
+ *
+ * These registers seem to be mirrored every thirty-two bytes up until offset
+ * 0x300. It's safe to assume then that a new set of registers starts there.
+ */
+
+#define PSC_SND_CTL     0x200   /*
+                                 * [ 16-bit ]
+                                 * Sound (Singer?) control register.
+                                 *
+                                 * bit 0  : ????
+                                 * bit 1  : ????
+                                 * bit 2  : Set to one to enable sound
+                                 *          output. Possibly a mute flag.
+                                 * bit 3  : ????
+                                 * bit 4  : ????
+                                 * bit 5  : ????
+                                 * bit 6  : Set to one to enable pass-thru
+                                 *          audio. In this mode the audio data
+                                 *          seems to appear in both the input
+                                 *          buffer and the output buffer.
+                                 * bit 7  : Set to one to activate the
+                                 *          sound input DMA or zero to
+                                 *          disable it.
+                                 * bit 8  : Set to one to activate the
+                                 *          sound output DMA or zero to
+                                 *          disable it.
+                                 * bit 9  : \
+                                 * bit 11 :  |
+                                 *          These two bits control the sample
+                                 *          rate. Usually set to binary 10 and
+                                 *          MacOS 8.0 says I'm at 48 KHz. Using
+                                 *          a binary value of 01 makes things
+                                 *          sound about 1/2 speed (24 KHz?) and
+                                 *          binary 00 is slower still (22 KHz?)
+                                 *
+                                 * Setting this to 0x0000 is a good way to
+                                 * kill all DMA at boot time so that the
+                                 * PSC won't overwrite the kernel image
+                                 * with sound data.
+                                 */
+
+/*
+ * 0x0202 - 0x0203 is unused. Writing there
+ * seems to clobber the control register.
+ */
+
+#define PSC_SND_SOURCE  0x204   /*
+                                 * [ 32-bit ]
+                                 * Controls input source and volume:
+                                 *
+                                 * bits 12-15 : input source volume, 0 - F
+                                 * bits 16-19 : unknown, always 0x5
+                                 * bits 20-23 : input source selection:
+                                 *                  0x3 = CD Audio
+                                 *                  0x4 = External Audio
+                                 *
+                                 * The volume is definitely not the general
+                                 * output volume as it doesn't affect the
+                                 * alert sound volume.
+                                 */
+#define PSC_SND_STATUS1 0x208   /*
+                                 * [ 32-bit ]
+                                 * Appears to be a read-only status register.
+                                 * The usual value is 0x00400002.
+                                 */
+#define PSC_SND_HUH3    0x20C   /*
+                                 * [ 16-bit ]
+                                 * Unknown 16-bit value, always 0x0000.
+                                 */
+#define PSC_SND_BITS2GO 0x20E   /*
+                                 * [ 16-bit ]
+                                 * Counts down to zero from some constant
+                                 * value. The value appears to be the
+                                 * number of _bits_ remaining before the
+                                 * buffer is full, which would make sense
+                                 * since Apple's docs say the sound DMA
+                                 * channels are 1 bit wide.
+                                 */
+#define PSC_SND_INADDR  0x210   /*
+                                 * [ 32-bit ]
+                                 * Address of the sound input DMA buffer
+                                 */
+#define PSC_SND_OUTADDR 0x214   /*
+                                 * [ 32-bit ]
+                                 * Address of the sound output DMA buffer
+                                 */
+#define PSC_SND_LEN     0x218   /*
+                                 * [ 16-bit ]
+                                 * Length of both buffers in eight-byte units.
+                                 */
+#define PSC_SND_HUH4    0x21A   /*
+                                 * [ 16-bit ]
+                                 * Unknown, always 0x0000.
+                                 */
+#define PSC_SND_STATUS2 0x21C   /*
+                                 * [ 16-bit ]
+                                 * Appears to e a read-only status register.
+                                 * The usual value is 0x0200.
+                                 */
+#define PSC_SND_HUH5    0x21E   /*
+                                 * [ 16-bit ]
+                                 * Unknown, always 0x0000.
+                                 */
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *psc;
+extern int psc_present;
+
+/*
+ *      Access functions
+ */
+
+static inline void psc_write_byte(int offset, __u8 data)
+{
+        *((volatile __u8 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_word(int offset, __u16 data)
+{
+        *((volatile __u16 *)(psc + offset)) = data;
+}
+
+static inline void psc_write_long(int offset, __u32 data)
+{
+        *((volatile __u32 *)(psc + offset)) = data;
+}
+
+static inline u8 psc_read_byte(int offset)
+{
+        return *((volatile __u8 *)(psc + offset));
+}
+
+static inline u16 psc_read_word(int offset)
+{
+        return *((volatile __u16 *)(psc + offset));
+}
+
+static inline u32 psc_read_long(int offset)
+{
+        return *((volatile __u32 *)(psc + offset));
+}
+
+#endif /* __ASSEMBLY__ */
diff --git a/arch/m68k/include/asm/mac_via.h b/arch/m68k/include/asm/mac_via.h
new file mode 100644
index 000000000000..39afb438b656
--- /dev/null
+++ b/arch/m68k/include/asm/mac_via.h
@@ -0,0 +1,267 @@
+/*
+ *      6522 Versatile Interface Adapter (VIA)
+ *
+ *      There are two of these on the Mac II. Some IRQ's are vectored
+ *      via them as are assorted bits and bobs - eg rtc, adb. The picture
+ *      is a bit incomplete as the Mac documentation doesn't cover this well
+ */
+
+#ifndef _ASM_MAC_VIA_H_
+#define _ASM_MAC_VIA_H_
+
+/*
+ * Base addresses for the VIAs. There are two in every machine,
+ * although on some machines the second is an RBV or an OSS.
+ * The OSS is different enough that it's handled separately.
+ *
+ * Do not use these values directly; use the via1 and via2 variables
+ * instead (and don't forget to check rbv_present when using via2!)
+ */
+
+#define VIA1_BASE       (0x50F00000)
+#define VIA2_BASE       (0x50F02000)
+#define  RBV_BASE       (0x50F26000)
+
+/*
+ *      Not all of these are true post MacII I think.
+ *      CSA: probably the ones CHRP marks as 'unused' change purposes
+ *      when the IWM becomes the SWIM.
+ *      http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
+ *      ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
+ *
+ * also, http://developer.apple.com/technotes/hw/hw_09.html claims the
+ * following changes for IIfx:
+ * VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
+ * Also, "All of the functionality of VIA2 has been moved to other chips".
+ */
+
+#define VIA1A_vSccWrReq 0x80    /* SCC write. (input)
+                                 * [CHRP] SCC WREQ: Reflects the state of the
+                                 * Wait/Request pins from the SCC.
+                                 * [Macintosh Family Hardware]
+                                 * as CHRP on SE/30,II,IIx,IIcx,IIci.
+                                 * on IIfx, "0 means an active request"
+                                 */
+#define VIA1A_vRev8     0x40    /* Revision 8 board ???
+                                 * [CHRP] En WaitReqB: Lets the WaitReq_L
+                                 * signal from port B of the SCC appear on
+                                 * the PA7 input pin. Output.
+                                 * [Macintosh Family] On the SE/30, this
+                                 * is the bit to flip screen buffers.
+                                 * 0=alternate, 1=main.
+                                 * on II,IIx,IIcx,IIci,IIfx this is a bit
+                                 * for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
+                                 */
+#define VIA1A_vHeadSel  0x20    /* Head select for IWM.
+                                 * [CHRP] unused.
+                                 * [Macintosh Family] "Floppy disk
+                                 * state-control line SEL" on all but IIfx
+                                 */
+#define VIA1A_vOverlay  0x10    /* [Macintosh Family] On SE/30,II,IIx,IIcx
+                                 * this bit enables the "Overlay" address
+                                 * map in the address decoders as it is on
+                                 * reset for mapping the ROM over the reset
+                                 * vector. 1=use overlay map.
+                                 * On the IIci,IIfx it is another bit of the
+                                 * CPU ID: 0=normal IIci, 1=IIci with parity
+                                 * feature or IIfx.
+                                 * [CHRP] En WaitReqA: Lets the WaitReq_L
+                                 * signal from port A of the SCC appear
+                                 * on the PA7 input pin (CHRP). Output.
+                                 * [MkLinux] "Drive Select"
+                                 *  (with 0x20 being 'disk head select')
+                                 */
+#define VIA1A_vSync     0x08    /* [CHRP] Sync Modem: modem clock select:
+                                 * 1: select the external serial clock to
+                                 *    drive the SCC's /RTxCA pin.
+                                 * 0: Select the 3.6864MHz clock to drive
+                                 *    the SCC cell.
+                                 * [Macintosh Family] Correct on all but IIfx
+                                 */
+
+/* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
+ * on Macs which had the PWM sound hardware.  Reserved on newer models.
+ * On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
+ * bit 2: 1=IIci, 0=IIfx
+ * bit 1: 1 on both IIci and IIfx.
+ * MkLinux sez bit 0 is 'burnin flag' in this case.
+ * CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
+ * inputs, these bits will read 0.
+ */
+#define VIA1A_vVolume   0x07    /* Audio volume mask for PWM */
+#define VIA1A_CPUID0    0x02    /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID1    0x04    /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID2    0x10    /* CPU id bit 0 on RBV, others */
+#define VIA1A_CPUID3    0x40    /* CPU id bit 0 on RBV, others */
+
+/* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
+ * CHRP offers no info. */
+#define VIA1B_vSound    0x80    /* Sound enable (for compatibility with
+                                 * PWM hardware) 0=enabled.
+                                 * Also, on IIci w/parity, shows parity error
+                                 * 0=error, 1=OK. */
+#define VIA1B_vMystery  0x40    /* On IIci, parity enable. 0=enabled,1=disabled
+                                 * On SE/30, vertical sync interrupt enable.
+                                 * 0=enabled. This vSync interrupt shows up
+                                 * as a slot $E interrupt. */
+#define VIA1B_vADBS2    0x20    /* ADB state input bit 1 (unused on IIfx) */
+#define VIA1B_vADBS1    0x10    /* ADB state input bit 0 (unused on IIfx) */
+#define VIA1B_vADBInt   0x08    /* ADB interrupt 0=interrupt (unused on IIfx)*/
+#define VIA1B_vRTCEnb   0x04    /* Enable Real time clock. 0=enabled. */
+#define VIA1B_vRTCClk   0x02    /* Real time clock serial-clock line. */
+#define VIA1B_vRTCData  0x01    /* Real time clock serial-data line. */
+
+/* MkLinux defines the following "VIA1 Register B contents where they
+ * differ from standard VIA1".  From the naming scheme, we assume they
+ * correspond to a VIA work-alike named 'EVR'. */
+#define EVRB_XCVR       0x08    /* XCVR_SESSION* */
+#define EVRB_FULL       0x10    /* VIA_FULL */
+#define EVRB_SYSES      0x20    /* SYS_SESSION */
+#define EVRB_AUXIE      0x00    /* Enable A/UX Interrupt Scheme */
+#define EVRB_AUXID      0x40    /* Disable A/UX Interrupt Scheme */
+#define EVRB_SFTWRIE    0x00    /* Software Interrupt ReQuest */
+#define EVRB_SFTWRID    0x80    /* Software Interrupt ReQuest */
+
+/*
+ *      VIA2 A register is the interrupt lines raised off the nubus
+ *      slots.
+ *      The below info is from 'Macintosh Family Hardware.'
+ *      MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
+ *      It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
+ *      defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
+ *      Perhaps OSS uses vRAM1 and vRAM2 for ADB.
+ */
+
+#define VIA2A_vRAM1     0x80    /* RAM size bit 1 (IIci: reserved) */
+#define VIA2A_vRAM0     0x40    /* RAM size bit 0 (IIci: internal video IRQ) */
+#define VIA2A_vIRQE     0x20    /* IRQ from slot $E */
+#define VIA2A_vIRQD     0x10    /* IRQ from slot $D */
+#define VIA2A_vIRQC     0x08    /* IRQ from slot $C */
+#define VIA2A_vIRQB     0x04    /* IRQ from slot $B */
+#define VIA2A_vIRQA     0x02    /* IRQ from slot $A */
+#define VIA2A_vIRQ9     0x01    /* IRQ from slot $9 */
+
+/* RAM size bits decoded as follows:
+ * bit1 bit0  size of ICs in bank A
+ *  0    0    256 kbit
+ *  0    1    1 Mbit
+ *  1    0    4 Mbit
+ *  1    1   16 Mbit
+ */
+
+/*
+ *      Register B has the fun stuff in it
+ */
+
+#define VIA2B_vVBL      0x80    /* VBL output to VIA1 (60.15Hz) driven by
+                                 * timer T1.
+                                 * on IIci, parity test: 0=test mode.
+                                 * [MkLinux] RBV_PARODD: 1=odd,0=even. */
+#define VIA2B_vSndJck   0x40    /* External sound jack status.
+                                 * 0=plug is inserted.  On SE/30, always 0 */
+#define VIA2B_vTfr0     0x20    /* Transfer mode bit 0 ack from NuBus */
+#define VIA2B_vTfr1     0x10    /* Transfer mode bit 1 ack from NuBus */
+#define VIA2B_vMode32   0x08    /* 24/32bit switch - doubles as cache flush
+                                 * on II, AMU/PMMU control.
+                                 *   if AMU, 0=24bit to 32bit translation
+                                 *   if PMMU, 1=PMMU is accessing page table.
+                                 * on SE/30 tied low.
+                                 * on IIx,IIcx,IIfx, unused.
+                                 * on IIci/RBV, cache control. 0=flush cache.
+                                 */
+#define VIA2B_vPower    0x04    /* Power off, 0=shut off power.
+                                 * on SE/30 this signal sent to PDS card. */
+#define VIA2B_vBusLk    0x02    /* Lock NuBus transactions, 0=locked.
+                                 * on SE/30 sent to PDS card. */
+#define VIA2B_vCDis     0x01    /* Cache control. On IIci, 1=disable cache card
+                                 * on others, 0=disable processor's instruction
+                                 * and data caches. */
+
+/* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
+ * Another example of a valid function that has no ROM support is the use
+ * of the alternate video page for page-flipping animation. Since there
+ * is no ROM call to flip pages, it is necessary to go play with the
+ * right bit in the VIA chip (6522 Versatile Interface Adapter).
+ * [CSA: don't know which one this is, but it's one of 'em!]
+ */
+
+/*
+ *      6522 registers - see databook.
+ * CSA: Assignments for VIA1 confirmed from CHRP spec.
+ */
+
+/* partial address decode.  0xYYXX : XX part for RBV, YY part for VIA */
+/* Note: 15 VIA regs, 8 RBV regs */
+
+#define vBufB   0x0000  /* [VIA/RBV]  Register B */
+#define vBufAH  0x0200  /* [VIA only] Buffer A, with handshake. DON'T USE! */
+#define vDirB   0x0400  /* [VIA only] Data Direction Register B. */
+#define vDirA   0x0600  /* [VIA only] Data Direction Register A. */
+#define vT1CL   0x0800  /* [VIA only] Timer one counter low. */
+#define vT1CH   0x0a00  /* [VIA only] Timer one counter high. */
+#define vT1LL   0x0c00  /* [VIA only] Timer one latches low. */
+#define vT1LH   0x0e00  /* [VIA only] Timer one latches high. */
+#define vT2CL   0x1000  /* [VIA only] Timer two counter low. */
+#define vT2CH   0x1200  /* [VIA only] Timer two counter high. */
+#define vSR     0x1400  /* [VIA only] Shift register. */
+#define vACR    0x1600  /* [VIA only] Auxilary control register. */
+#define vPCR    0x1800  /* [VIA only] Peripheral control register. */
+                        /*            CHRP sez never ever to *write* this.
+                         *            Mac family says never to *change* this.
+                         * In fact we need to initialize it once at start. */
+#define vIFR    0x1a00  /* [VIA/RBV]  Interrupt flag register. */
+#define vIER    0x1c00  /* [VIA/RBV]  Interrupt enable register. */
+#define vBufA   0x1e00  /* [VIA/RBV] register A (no handshake) */
+
+/* The RBV only decodes the bottom eight address lines; the VIA doesn't
+ * decode the bottom eight -- so vBufB | rBufB will always get you BufB */
+/* CSA: in fact, only bits 0,1, and 4 seem to be decoded.
+ * BUT note the values for rIER and rIFR, where the top 8 bits *do* seem
+ * to matter.  In fact *all* of the top 8 bits seem to matter;
+ * setting rIER=0x1813 and rIFR=0x1803 doesn't work, either.
+ * Perhaps some sort of 'compatibility mode' is built-in? [21-May-1999]
+ */
+
+#define rBufB   0x0000  /* [VIA/RBV]  Register B */
+#define rExp    0x0001  /* [RBV only] RBV future expansion (always 0) */
+#define rSIFR   0x0002  /* [RBV only] RBV slot interrupts register. */
+#define rIFR    0x1a03  /* [VIA/RBV]  RBV interrupt flag register. */
+#define rMonP   0x0010  /* [RBV only] RBV video monitor type. */
+#define rChpT   0x0011  /* [RBV only] RBV test mode register (reads as 0). */
+#define rSIER   0x0012  /* [RBV only] RBV slot interrupt enables. */
+#define rIER    0x1c13  /* [VIA/RBV]  RBV interrupt flag enable register. */
+#define rBufA   rSIFR   /* the 'slot interrupts register' is BufA on a VIA */
+
+/*
+ * Video monitor parameters, for rMonP:
+ */
+#define RBV_DEPTH  0x07 /* bits per pixel: 000=1,001=2,010=4,011=8 */
+#define RBV_MONID  0x38 /* monitor type, as below. */
+#define RBV_VIDOFF 0x40 /* 1 turns off onboard video */
+/* Supported monitor types: */
+#define MON_15BW   (1<<3) /* 15" BW portrait. */
+#define MON_IIGS   (2<<3) /* 12" color (modified IIGS monitor). */
+#define MON_15RGB  (5<<3) /* 15" RGB portrait. */
+#define MON_12OR13 (6<<3) /* 12" BW or 13" RGB. */
+#define MON_NONE   (7<<3) /* No monitor attached. */
+
+/* To clarify IER manipulations */
+#define IER_SET_BIT(b) (0x80 | (1<<(b)) )
+#define IER_CLR_BIT(b) (0x7F & (1<<(b)) )
+
+#ifndef __ASSEMBLY__
+
+extern volatile __u8 *via1,*via2;
+extern int rbv_present,via_alt_mapping;
+
+static inline int rbv_set_video_bpp(int bpp)
+{
+        char val = (bpp==1)?0:(bpp==2)?1:(bpp==4)?2:(bpp==8)?3:-1;
+        if (!rbv_present || val<0) return -1;
+        via2[rMonP] = (via2[rMonP] & ~RBV_DEPTH) | val;
+        return 0;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_MAC_VIA_H_ */
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
new file mode 100644
index 000000000000..fc24b6fc5508
--- /dev/null
+++ b/arch/m68k/include/asm/machdep.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "machdep_no.h"
+#else
+#include "machdep_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/machdep_mm.h b/arch/m68k/include/asm/machdep_mm.h
new file mode 100644
index 000000000000..5637dcef314e
--- /dev/null
+++ b/arch/m68k/include/asm/machdep_mm.h
@@ -0,0 +1,35 @@
+#ifndef _M68K_MACHDEP_H
+#define _M68K_MACHDEP_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+struct pt_regs;
+struct mktime;
+struct rtc_time;
+struct rtc_pll_info;
+struct buffer_head;
+
+extern void (*mach_sched_init) (irq_handler_t handler);
+/* machine dependent irq functions */
+extern void (*mach_init_IRQ) (void);
+extern void (*mach_get_model) (char *model);
+extern void (*mach_get_hardware_list) (struct seq_file *m);
+/* machine dependent timer functions */
+extern unsigned long (*mach_gettimeoffset)(void);
+extern int (*mach_hwclk)(int, struct rtc_time*);
+extern unsigned int (*mach_get_ss)(void);
+extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
+extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
+extern int (*mach_set_clock_mmss)(unsigned long);
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+extern unsigned long (*mach_hd_init) (unsigned long, unsigned long);
+extern void (*mach_hd_setup)(char *, int *);
+extern long mach_max_dma_address;
+extern void (*mach_heartbeat) (int);
+extern void (*mach_l2_flush) (int);
+extern void (*mach_beep) (unsigned int, unsigned int);
+
+#endif /* _M68K_MACHDEP_H */
diff --git a/arch/m68k/include/asm/machdep_no.h b/arch/m68k/include/asm/machdep_no.h
new file mode 100644
index 000000000000..de9f47a51cc2
--- /dev/null
+++ b/arch/m68k/include/asm/machdep_no.h
@@ -0,0 +1,26 @@
+#ifndef _M68KNOMMU_MACHDEP_H
+#define _M68KNOMMU_MACHDEP_H
+
+#include <linux/interrupt.h>
+
+/* Hardware clock functions */
+extern void hw_timer_init(void);
+extern unsigned long hw_timer_offset(void);
+
+extern irqreturn_t arch_timer_interrupt(int irq, void *dummy);
+
+/* Machine dependent time handling */
+extern void (*mach_gettod)(int *year, int *mon, int *day, int *hour,
+                           int *min, int *sec);
+extern int (*mach_set_clock_mmss)(unsigned long);
+
+/* machine dependent power off functions */
+extern void (*mach_reset)( void );
+extern void (*mach_halt)( void );
+extern void (*mach_power_off)( void );
+
+extern void config_BSP(char *command, int len);
+
+extern void do_IRQ(int irq, struct pt_regs *fp);
+
+#endif /* _M68KNOMMU_MACHDEP_H */
diff --git a/arch/m68k/include/asm/machines.h b/arch/m68k/include/asm/machines.h
new file mode 100644
index 000000000000..be667e84f01b
--- /dev/null
+++ b/arch/m68k/include/asm/machines.h
@@ -0,0 +1,85 @@
+/*
+ * machines.h:  Defines for taking apart the machine type value in the
+ *              idprom and determining the kind of machine we are on.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au)
+ */
+#ifndef _SPARC_MACHINES_H
+#define _SPARC_MACHINES_H
+
+struct Sun_Machine_Models {
+        char *name;
+        unsigned char id_machtype;
+};
+
+/* Current number of machines we know about that has an IDPROM
+ * machtype entry including one entry for the 0x80 OBP machines.
+ */
+// reduced along with table in arch/m68k/sun3/idprom.c
+// sun3 port doesn't need to know about sparc machines.
+//#define NUM_SUN_MACHINES   23
+#define NUM_SUN_MACHINES  8
+
+/* The machine type in the idprom area looks like this:
+ *
+ * ---------------
+ * | ARCH | MACH |
+ * ---------------
+ *  7    4 3    0
+ *
+ * The ARCH field determines the architecture line (sun4, sun4c, etc).
+ * The MACH field determines the machine make within that architecture.
+ */
+
+#define SM_ARCH_MASK  0xf0
+#define SM_SUN3       0x10
+#define SM_SUN4       0x20
+#define SM_SUN3X      0x40
+#define SM_SUN4C      0x50
+#define SM_SUN4M      0x70
+#define SM_SUN4M_OBP  0x80
+
+#define SM_TYP_MASK   0x0f
+/* Sun3 machines */
+#define SM_3_160      0x01    /* Sun 3/160 series */
+#define SM_3_50       0x02    /* Sun 3/50 series */
+#define SM_3_260      0x03    /* Sun 3/260 series */
+#define SM_3_110      0x04    /* Sun 3/110 series */
+#define SM_3_60       0x07    /* Sun 3/60 series */
+#define SM_3_E        0x08    /* Sun 3/E series */
+
+/* Sun3x machines */
+#define SM_3_460      0x01    /* Sun 3/460 (460,470,480) series */
+#define SM_3_80       0x02    /* Sun 3/80 series */
+
+/* Sun4 machines */
+#define SM_4_260      0x01    /* Sun 4/200 series */
+#define SM_4_110      0x02    /* Sun 4/100 series */
+#define SM_4_330      0x03    /* Sun 4/300 series */
+#define SM_4_470      0x04    /* Sun 4/400 series */
+
+/* Sun4c machines                Full Name              - PROM NAME */
+#define SM_4C_SS1     0x01    /* Sun4c SparcStation 1   - Sun 4/60  */
+#define SM_4C_IPC     0x02    /* Sun4c SparcStation IPC - Sun 4/40  */
+#define SM_4C_SS1PLUS 0x03    /* Sun4c SparcStation 1+  - Sun 4/65  */
+#define SM_4C_SLC     0x04    /* Sun4c SparcStation SLC - Sun 4/20  */
+#define SM_4C_SS2     0x05    /* Sun4c SparcStation 2   - Sun 4/75  */
+#define SM_4C_ELC     0x06    /* Sun4c SparcStation ELC - Sun 4/25  */
+#define SM_4C_IPX     0x07    /* Sun4c SparcStation IPX - Sun 4/50  */
+
+/* Sun4m machines, these predate the OpenBoot.  These values only mean
+ * something if the value in the ARCH field is SM_SUN4M, if it is
+ * SM_SUN4M_OBP then you have the following situation:
+ * 1) You either have a sun4d, a sun4e, or a recently made sun4m.
+ * 2) You have to consult OpenBoot to determine which machine this is.
+ */
+#define SM_4M_SS60    0x01    /* Sun4m SparcSystem 600                  */
+#define SM_4M_SS50    0x02    /* Sun4m SparcStation 10                  */
+#define SM_4M_SS40    0x03    /* Sun4m SparcStation 5                   */
+
+/* Sun4d machines -- N/A */
+/* Sun4e machines -- N/A */
+/* Sun4u machines -- N/A */
+
+#endif /* !(_SPARC_MACHINES_H) */
diff --git a/arch/m68k/include/asm/machw.h b/arch/m68k/include/asm/machw.h
new file mode 100644
index 000000000000..2b4de0c2ce4a
--- /dev/null
+++ b/arch/m68k/include/asm/machw.h
@@ -0,0 +1,49 @@
+/*
+** linux/machw.h -- This header defines some macros and pointers for
+**                    the various Macintosh custom hardware registers.
+**
+** Copyright 1997 by Michael Schmitz
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _ASM_MACHW_H_
+#define _ASM_MACHW_H_
+
+/*
+ * head.S maps the videomem to VIDEOMEMBASE
+ */
+
+#define VIDEOMEMBASE    0xf0000000
+#define VIDEOMEMSIZE    (4096*1024)
+#define VIDEOMEMMASK    (-4096*1024)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/types.h>
+
+#if 0
+/*
+** SCC Z8530
+*/
+
+#define MAC_SCC_BAS (0x50F04000)
+struct MAC_SCC
+ {
+  u_char cha_a_ctrl;
+  u_char char_dummy1;
+  u_char cha_a_data;
+  u_char char_dummy2;
+  u_char cha_b_ctrl;
+  u_char char_dummy3;
+  u_char cha_b_data;
+ };
+# define mac_scc ((*(volatile struct SCC*)MAC_SCC_BAS))
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* linux/machw.h */
diff --git a/arch/m68k/include/asm/macintosh.h b/arch/m68k/include/asm/macintosh.h
new file mode 100644
index 000000000000..05309f7e3d06
--- /dev/null
+++ b/arch/m68k/include/asm/macintosh.h
@@ -0,0 +1,135 @@
+#ifndef __ASM_MACINTOSH_H
+#define __ASM_MACINTOSH_H
+
+#include <linux/seq_file.h>
+#include <linux/interrupt.h>
+
+/*
+ *      Apple Macintoshisms
+ */
+
+extern void mac_reset(void);
+extern void mac_poweroff(void);
+extern void mac_init_IRQ(void);
+extern int mac_irq_pending(unsigned int);
+
+/*
+ *      Floppy driver magic hook - probably shouldnt be here
+ */
+
+extern void via1_set_head(int);
+
+/*
+ *      Macintosh Table
+ */
+
+struct mac_model
+{
+        short ident;
+        char *name;
+        char adb_type;
+        char via_type;
+        char scsi_type;
+        char ide_type;
+        char scc_type;
+        char ether_type;
+        char nubus_type;
+};
+
+#define MAC_ADB_NONE            0
+#define MAC_ADB_II              1
+#define MAC_ADB_IISI            2
+#define MAC_ADB_CUDA            3
+#define MAC_ADB_PB1             4
+#define MAC_ADB_PB2             5
+#define MAC_ADB_IOP             6
+
+#define MAC_VIA_II              1
+#define MAC_VIA_IIci            2
+#define MAC_VIA_QUADRA          3
+
+#define MAC_SCSI_NONE           0
+#define MAC_SCSI_OLD            1
+#define MAC_SCSI_QUADRA         2
+#define MAC_SCSI_QUADRA2        3
+#define MAC_SCSI_QUADRA3        4
+
+#define MAC_IDE_NONE            0
+#define MAC_IDE_QUADRA          1
+#define MAC_IDE_PB              2
+#define MAC_IDE_BABOON          3
+
+#define MAC_SCC_II              1
+#define MAC_SCC_IOP             2
+#define MAC_SCC_QUADRA          3
+#define MAC_SCC_PSC             4
+
+#define MAC_ETHER_NONE          0
+#define MAC_ETHER_SONIC         1
+#define MAC_ETHER_MACE          2
+
+#define MAC_NO_NUBUS            0
+#define MAC_NUBUS               1
+
+/*
+ *      Gestalt numbers
+ */
+
+#define MAC_MODEL_II            6
+#define MAC_MODEL_IIX           7
+#define MAC_MODEL_IICX          8
+#define MAC_MODEL_SE30          9
+#define MAC_MODEL_IICI          11
+#define MAC_MODEL_IIFX          13      /* And well numbered it is too */
+#define MAC_MODEL_IISI          18
+#define MAC_MODEL_LC            19
+#define MAC_MODEL_Q900          20
+#define MAC_MODEL_PB170         21
+#define MAC_MODEL_Q700          22
+#define MAC_MODEL_CLII          23      /* aka: P200 */
+#define MAC_MODEL_PB140         25
+#define MAC_MODEL_Q950          26      /* aka: WGS95 */
+#define MAC_MODEL_LCIII         27      /* aka: P450 */
+#define MAC_MODEL_PB210         29
+#define MAC_MODEL_C650          30
+#define MAC_MODEL_PB230         32
+#define MAC_MODEL_PB180         33
+#define MAC_MODEL_PB160         34
+#define MAC_MODEL_Q800          35      /* aka: WGS80 */
+#define MAC_MODEL_Q650          36
+#define MAC_MODEL_LCII          37      /* aka: P400/405/410/430 */
+#define MAC_MODEL_PB250         38
+#define MAC_MODEL_IIVI          44
+#define MAC_MODEL_P600          45      /* aka: P600CD */
+#define MAC_MODEL_IIVX          48
+#define MAC_MODEL_CCL           49      /* aka: P250 */
+#define MAC_MODEL_PB165C        50
+#define MAC_MODEL_C610          52      /* aka: WGS60 */
+#define MAC_MODEL_Q610          53
+#define MAC_MODEL_PB145         54      /* aka: PB145B */
+#define MAC_MODEL_P520          56      /* aka: LC520 */
+#define MAC_MODEL_C660          60
+#define MAC_MODEL_P460          62      /* aka: LCIII+, P466/P467 */
+#define MAC_MODEL_PB180C        71
+#define MAC_MODEL_PB520         72      /* aka: PB520C, PB540, PB540C, PB550C */
+#define MAC_MODEL_PB270C        77
+#define MAC_MODEL_Q840          78
+#define MAC_MODEL_P550          80      /* aka: LC550, P560 */
+#define MAC_MODEL_CCLII         83      /* aka: P275 */
+#define MAC_MODEL_PB165         84
+#define MAC_MODEL_PB190         85      /* aka: PB190CS */
+#define MAC_MODEL_TV            88
+#define MAC_MODEL_P475          89      /* aka: LC475, P476 */
+#define MAC_MODEL_P475F         90      /* aka: P475 w/ FPU (no LC040) */
+#define MAC_MODEL_P575          92      /* aka: LC575, P577/P578 */
+#define MAC_MODEL_Q605          94
+#define MAC_MODEL_Q605_ACC      95      /* Q605 accelerated to 33 MHz */
+#define MAC_MODEL_Q630          98      /* aka: LC630, P630/631/635/636/637/638/640 */
+#define MAC_MODEL_P588          99      /* aka: LC580, P580 */
+#define MAC_MODEL_PB280         102
+#define MAC_MODEL_PB280C        103
+#define MAC_MODEL_PB150         115
+
+extern struct mac_model *macintosh_config;
+
+#endif
diff --git a/arch/m68k/include/asm/macints.h b/arch/m68k/include/asm/macints.h
new file mode 100644
index 000000000000..679c48ab4407
--- /dev/null
+++ b/arch/m68k/include/asm/macints.h
@@ -0,0 +1,155 @@
+/*
+** macints.h -- Macintosh Linux interrupt handling structs and prototypes
+**
+** Copyright 1997 by Michael Schmitz
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+*/
+
+#ifndef _ASM_MACINTS_H_
+#define _ASM_MACINTS_H_
+
+#include <asm/irq.h>
+
+/* Setting this prints debugging info for unclaimed interrupts */
+
+#define DEBUG_SPURIOUS
+
+/* Setting this prints debugging info on each autovector interrupt */
+
+/* #define DEBUG_IRQS */
+
+/* Setting this prints debugging info on each Nubus interrupt */
+
+/* #define DEBUG_NUBUS_INT */
+
+/* Setting this prints debugging info on irqs as they enabled and disabled. */
+
+/* #define DEBUG_IRQUSE */
+
+/*
+ * Base IRQ number for all Mac68K interrupt sources. Each source
+ * has eight indexes (base -> base+7).
+ */
+
+#define VIA1_SOURCE_BASE        8
+#define VIA2_SOURCE_BASE        16
+#define MAC_SCC_SOURCE_BASE     24
+#define PSC3_SOURCE_BASE        24
+#define PSC4_SOURCE_BASE        32
+#define PSC5_SOURCE_BASE        40
+#define PSC6_SOURCE_BASE        48
+#define NUBUS_SOURCE_BASE       56
+#define BABOON_SOURCE_BASE      64
+
+/*
+ * Maximum IRQ number is BABOON_SOURCE_BASE + 7,
+ * giving us IRQs up through 71
+ */
+
+#define NUM_MAC_SOURCES         72
+
+/*
+ * clean way to separate IRQ into its source and index
+ */
+
+#define IRQ_SRC(irq)    (irq >> 3)
+#define IRQ_IDX(irq)    (irq & 7)
+
+/* VIA1 interrupts */
+#define IRQ_VIA1_0        (8)           /* one second int. */
+#define IRQ_VIA1_1        (9)           /* VBlank int. */
+#define IRQ_MAC_VBL       IRQ_VIA1_1
+#define IRQ_VIA1_2        (10)          /* ADB SR shifts complete */
+#define IRQ_MAC_ADB       IRQ_VIA1_2
+#define IRQ_MAC_ADB_SR    IRQ_VIA1_2
+#define IRQ_VIA1_3        (11)          /* ADB SR CB2 ?? */
+#define IRQ_MAC_ADB_SD    IRQ_VIA1_3
+#define IRQ_VIA1_4        (12)          /* ADB SR ext. clock pulse */
+#define IRQ_MAC_ADB_CL    IRQ_VIA1_4
+#define IRQ_VIA1_5        (13)
+#define IRQ_MAC_TIMER_2   IRQ_VIA1_5
+#define IRQ_VIA1_6        (14)
+#define IRQ_MAC_TIMER_1   IRQ_VIA1_6
+#define IRQ_VIA1_7        (15)
+
+/* VIA2/RBV interrupts */
+#define IRQ_VIA2_0        (16)
+#define IRQ_MAC_SCSIDRQ   IRQ_VIA2_0
+#define IRQ_VIA2_1        (17)
+#define IRQ_MAC_NUBUS     IRQ_VIA2_1
+#define IRQ_VIA2_2        (18)
+#define IRQ_VIA2_3        (19)
+#define IRQ_MAC_SCSI      IRQ_VIA2_3
+#define IRQ_VIA2_4        (20)
+#define IRQ_VIA2_5        (21)
+#define IRQ_VIA2_6        (22)
+#define IRQ_VIA2_7        (23)
+
+/* Level 3 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC3_0        (24)
+#define IRQ_MAC_MACE      IRQ_PSC3_0
+#define IRQ_PSC3_1        (25)
+#define IRQ_PSC3_2        (26)
+#define IRQ_PSC3_3        (27)
+
+/* Level 4 (SCC) interrupts */
+#define IRQ_SCC              (32)
+#define IRQ_SCCA             (33)
+#define IRQ_SCCB             (34)
+#if 0 /* FIXME: are there multiple interrupt conditions on the SCC ?? */
+/* SCC interrupts */
+#define IRQ_SCCB_TX          (32)
+#define IRQ_SCCB_STAT        (33)
+#define IRQ_SCCB_RX          (34)
+#define IRQ_SCCB_SPCOND      (35)
+#define IRQ_SCCA_TX          (36)
+#define IRQ_SCCA_STAT        (37)
+#define IRQ_SCCA_RX          (38)
+#define IRQ_SCCA_SPCOND      (39)
+#endif
+
+/* Level 4 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC4_0        (32)
+#define IRQ_PSC4_1        (33)
+#define IRQ_PSC4_2        (34)
+#define IRQ_PSC4_3        (35)
+#define IRQ_MAC_MACE_DMA  IRQ_PSC4_3
+
+/* Level 5 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC5_0        (40)
+#define IRQ_PSC5_1        (41)
+#define IRQ_PSC5_2        (42)
+#define IRQ_PSC5_3        (43)
+
+/* Level 6 (PSC, AV Macs only) interrupts */
+#define IRQ_PSC6_0        (48)
+#define IRQ_PSC6_1        (49)
+#define IRQ_PSC6_2        (50)
+#define IRQ_PSC6_3        (51)
+
+/* Nubus interrupts (cascaded to VIA2) */
+#define IRQ_NUBUS_9       (56)
+#define IRQ_NUBUS_A       (57)
+#define IRQ_NUBUS_B       (58)
+#define IRQ_NUBUS_C       (59)
+#define IRQ_NUBUS_D       (60)
+#define IRQ_NUBUS_E       (61)
+#define IRQ_NUBUS_F       (62)
+
+/* Baboon interrupts (cascaded to nubus slot $C) */
+#define IRQ_BABOON_0      (64)
+#define IRQ_BABOON_1      (65)
+#define IRQ_BABOON_2      (66)
+#define IRQ_BABOON_3      (67)
+
+#define SLOT2IRQ(x)       (x + 47)
+#define IRQ2SLOT(x)       (x - 47)
+
+#define INT_CLK   24576     /* CLK while int_clk =2.456MHz and divide = 100 */
+#define INT_TICKS 246       /* to make sched_time = 99.902... HZ */
+
+#endif /* asm/macints.h */
diff --git a/arch/m68k/include/asm/math-emu.h b/arch/m68k/include/asm/math-emu.h
new file mode 100644
index 000000000000..ddfab96403cb
--- /dev/null
+++ b/arch/m68k/include/asm/math-emu.h
@@ -0,0 +1,315 @@
+#ifndef _ASM_M68K_SETUP_H
+#define _ASM_M68K_SETUP_H
+
+#include <asm/setup.h>
+#include <linux/linkage.h>
+
+/* Status Register bits */
+
+/* accrued exception bits */
+#define FPSR_AEXC_INEX  3
+#define FPSR_AEXC_DZ    4
+#define FPSR_AEXC_UNFL  5
+#define FPSR_AEXC_OVFL  6
+#define FPSR_AEXC_IOP   7
+
+/* exception status bits */
+#define FPSR_EXC_INEX1  8
+#define FPSR_EXC_INEX2  9
+#define FPSR_EXC_DZ     10
+#define FPSR_EXC_UNFL   11
+#define FPSR_EXC_OVFL   12
+#define FPSR_EXC_OPERR  13
+#define FPSR_EXC_SNAN   14
+#define FPSR_EXC_BSUN   15
+
+/* quotient byte, assumes big-endian, of course */
+#define FPSR_QUOTIENT(fpsr) (*((signed char *) &(fpsr) + 1))
+
+/* condition code bits */
+#define FPSR_CC_NAN     24
+#define FPSR_CC_INF     25
+#define FPSR_CC_Z       26
+#define FPSR_CC_NEG     27
+
+
+/* Control register bits */
+
+/* rounding mode */
+#define FPCR_ROUND_RN   0               /* round to nearest/even */
+#define FPCR_ROUND_RZ   1               /* round to zero */
+#define FPCR_ROUND_RM   2               /* minus infinity */
+#define FPCR_ROUND_RP   3               /* plus infinity */
+
+/* rounding precision */
+#define FPCR_PRECISION_X        0       /* long double */
+#define FPCR_PRECISION_S        1       /* double */
+#define FPCR_PRECISION_D        2       /* float */
+
+
+/* Flags to select the debugging output */
+#define PDECODE         0
+#define PEXECUTE        1
+#define PCONV           2
+#define PNORM           3
+#define PREGISTER       4
+#define PINSTR          5
+#define PUNIMPL         6
+#define PMOVEM          7
+
+#define PMDECODE        (1<<PDECODE)
+#define PMEXECUTE       (1<<PEXECUTE)
+#define PMCONV          (1<<PCONV)
+#define PMNORM          (1<<PNORM)
+#define PMREGISTER      (1<<PREGISTER)
+#define PMINSTR         (1<<PINSTR)
+#define PMUNIMPL        (1<<PUNIMPL)
+#define PMMOVEM         (1<<PMOVEM)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+
+union fp_mant64 {
+        unsigned long long m64;
+        unsigned long m32[2];
+};
+
+union fp_mant128 {
+        unsigned long long m64[2];
+        unsigned long m32[4];
+};
+
+/* internal representation of extended fp numbers */
+struct fp_ext {
+        unsigned char lowmant;
+        unsigned char sign;
+        unsigned short exp;
+        union fp_mant64 mant;
+};
+
+/* C representation of FPU registers */
+/* NOTE: if you change this, you have to change the assembler offsets
+   below and the size in <asm/fpu.h>, too */
+struct fp_data {
+        struct fp_ext fpreg[8];
+        unsigned int fpcr;
+        unsigned int fpsr;
+        unsigned int fpiar;
+        unsigned short prec;
+        unsigned short rnd;
+        struct fp_ext temp[2];
+};
+
+#ifdef FPU_EMU_DEBUG
+extern unsigned int fp_debugprint;
+
+#define dprint(bit, fmt, args...) ({                    \
+        if (fp_debugprint & (1 << (bit)))               \
+                printk(fmt, ## args);                   \
+})
+#else
+#define dprint(bit, fmt, args...)
+#endif
+
+#define uprint(str) ({                                  \
+        static int __count = 3;                         \
+                                                        \
+        if (__count > 0) {                              \
+                printk("You just hit an unimplemented " \
+                       "fpu instruction (%s)\n", str);  \
+                printk("Please report this to ....\n"); \
+                __count--;                              \
+        }                                               \
+})
+
+#define FPDATA          ((struct fp_data *)current->thread.fp)
+
+#else   /* __ASSEMBLY__ */
+
+#define FPDATA          %a2
+
+/* offsets from the base register to the floating point data in the task struct */
+#define FPD_FPREG       (TASK_THREAD+THREAD_FPREG+0)
+#define FPD_FPCR        (TASK_THREAD+THREAD_FPREG+96)
+#define FPD_FPSR        (TASK_THREAD+THREAD_FPREG+100)
+#define FPD_FPIAR       (TASK_THREAD+THREAD_FPREG+104)
+#define FPD_PREC        (TASK_THREAD+THREAD_FPREG+108)
+#define FPD_RND         (TASK_THREAD+THREAD_FPREG+110)
+#define FPD_TEMPFP1     (TASK_THREAD+THREAD_FPREG+112)
+#define FPD_TEMPFP2     (TASK_THREAD+THREAD_FPREG+124)
+#define FPD_SIZEOF      (TASK_THREAD+THREAD_FPREG+136)
+
+/* offsets on the stack to access saved registers,
+ * these are only used during instruction decoding
+ * where we always know how deep we're on the stack.
+ */
+#define FPS_DO          (PT_D0)
+#define FPS_D1          (PT_D1)
+#define FPS_D2          (PT_D2)
+#define FPS_A0          (PT_A0)
+#define FPS_A1          (PT_A1)
+#define FPS_A2          (PT_A2)
+#define FPS_SR          (PT_SR)
+#define FPS_PC          (PT_PC)
+#define FPS_EA          (PT_PC+6)
+#define FPS_PC2         (PT_PC+10)
+
+.macro  fp_get_fp_reg
+        lea     (FPD_FPREG,FPDATA,%d0.w*4),%a0
+        lea     (%a0,%d0.w*8),%a0
+.endm
+
+/* Macros used to get/put the current program counter.
+ * 020/030 use a different stack frame then 040/060, for the
+ * 040/060 the return pc points already to the next location,
+ * so this only needs to be modified for jump instructions.
+ */
+.macro  fp_get_pc dest
+        move.l  (FPS_PC+4,%sp),\dest
+.endm
+
+.macro  fp_put_pc src,jump=0
+        move.l  \src,(FPS_PC+4,%sp)
+.endm
+
+.macro  fp_get_instr_data       f,s,dest,label
+        getuser \f,%sp@(FPS_PC+4)@(0),\dest,\label,%sp@(FPS_PC+4)
+        addq.l  #\s,%sp@(FPS_PC+4)
+.endm
+
+.macro  fp_get_instr_word       dest,label,addr
+        fp_get_instr_data       w,2,\dest,\label,\addr
+.endm
+
+.macro  fp_get_instr_long       dest,label,addr
+        fp_get_instr_data       l,4,\dest,\label,\addr
+.endm
+
+/* These macros are used to read from/write to user space
+ * on error we jump to the fixup section, load the fault
+ * address into %a0 and jump to the exit.
+ * (derived from <asm/uaccess.h>)
+ */
+.macro  getuser size,src,dest,label,addr
+|       printf  ,"[\size<%08x]",1,\addr
+.Lu1\@: moves\size      \src,\dest
+
+        .section .fixup,"ax"
+        .even
+.Lu2\@: move.l  \addr,%a0
+        jra     \label
+        .previous
+
+        .section __ex_table,"a"
+        .align  4
+        .long   .Lu1\@,.Lu2\@
+        .previous
+.endm
+
+.macro  putuser size,src,dest,label,addr
+|       printf  ,"[\size>%08x]",1,\addr
+.Lu1\@: moves\size      \src,\dest
+.Lu2\@:
+
+        .section .fixup,"ax"
+        .even
+.Lu3\@: move.l  \addr,%a0
+        jra     \label
+        .previous
+
+        .section __ex_table,"a"
+        .align  4
+        .long   .Lu1\@,.Lu3\@
+        .long   .Lu2\@,.Lu3\@
+        .previous
+.endm
+
+/* work around binutils idiocy */
+old_gas=-1
+.irp    gas_ident.x .x
+old_gas=old_gas+1
+.endr
+.if !old_gas
+.irp    m b,w,l
+.macro  getuser.\m src,dest,label,addr
+        getuser .\m,\src,\dest,\label,\addr
+.endm
+.macro  putuser.\m src,dest,label,addr
+        putuser .\m,\src,\dest,\label,\addr
+.endm
+.endr
+.endif
+
+.macro  movestack       nr,arg1,arg2,arg3,arg4,arg5
+        .if     \nr
+        movestack       (\nr-1),\arg2,\arg3,\arg4,\arg5
+        move.l  \arg1,-(%sp)
+        .endif
+.endm
+
+.macro  printf  bit=-1,string,nr=0,arg1,arg2,arg3,arg4,arg5
+#ifdef FPU_EMU_DEBUG
+        .data
+.Lpdata\@:
+        .string "\string"
+        .previous
+
+        movem.l %d0/%d1/%a0/%a1,-(%sp)
+        .if     \bit+1
+#if 0
+        moveq   #\bit,%d0
+        andw    #7,%d0
+        btst    %d0,fp_debugprint+((31-\bit)/8)
+#else
+        btst    #\bit,fp_debugprint+((31-\bit)/8)
+#endif
+        jeq     .Lpskip\@
+        .endif
+        movestack       \nr,\arg1,\arg2,\arg3,\arg4,\arg5
+        pea     .Lpdata\@
+        jsr     printk
+        lea     ((\nr+1)*4,%sp),%sp
+.Lpskip\@:
+        movem.l (%sp)+,%d0/%d1/%a0/%a1
+#endif
+.endm
+
+.macro  printx  bit,fp
+#ifdef FPU_EMU_DEBUG
+        movem.l %d0/%a0,-(%sp)
+        lea     \fp,%a0
+#if 0
+        moveq   #'+',%d0
+        tst.w   (%a0)
+        jeq     .Lx1\@
+        moveq   #'-',%d0
+.Lx1\@: printf  \bit," %c",1,%d0
+        move.l  (4,%a0),%d0
+        bclr    #31,%d0
+        jne     .Lx2\@
+        printf  \bit,"0."
+        jra     .Lx3\@
+.Lx2\@: printf  \bit,"1."
+.Lx3\@: printf  \bit,"%08x%08x",2,%d0,%a0@(8)
+        move.w  (2,%a0),%d0
+        ext.l   %d0
+        printf  \bit,"E%04x",1,%d0
+#else
+        printf  \bit," %08x%08x%08x",3,%a0@,%a0@(4),%a0@(8)
+#endif
+        movem.l (%sp)+,%d0/%a0
+#endif
+.endm
+
+.macro  debug   instr,args
+#ifdef FPU_EMU_DEBUG
+        \instr  \args
+#endif
+.endm
+
+
+#endif  /* __ASSEMBLY__ */
+
+#endif  /* _ASM_M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc.h
new file mode 100644
index 000000000000..fb90dcf78426
--- /dev/null
+++ b/arch/m68k/include/asm/mc146818rtc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mc146818rtc_no.h"
+#else
+#include "mc146818rtc_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/mc146818rtc_mm.h b/arch/m68k/include/asm/mc146818rtc_mm.h
new file mode 100644
index 000000000000..9f70a01f73dc
--- /dev/null
+++ b/arch/m68k/include/asm/mc146818rtc_mm.h
@@ -0,0 +1,26 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _ASM_MC146818RTC_H
+#define _ASM_MC146818RTC_H
+
+
+#ifdef CONFIG_ATARI
+/* RTC in Atari machines */
+
+#include <asm/atarihw.h>
+
+#define RTC_PORT(x)     (TT_RTC_BAS + 2*(x))
+#define RTC_ALWAYS_BCD  0
+
+#define CMOS_READ(addr) ({ \
+atari_outb_p((addr),RTC_PORT(0)); \
+atari_inb_p(RTC_PORT(1)); \
+})
+#define CMOS_WRITE(val, addr) ({ \
+atari_outb_p((addr),RTC_PORT(0)); \
+atari_outb_p((val),RTC_PORT(1)); \
+})
+#endif /* CONFIG_ATARI */
+
+#endif /* _ASM_MC146818RTC_H */
diff --git a/arch/m68k/include/asm/mc146818rtc_no.h b/arch/m68k/include/asm/mc146818rtc_no.h
new file mode 100644
index 000000000000..907a0481a140
--- /dev/null
+++ b/arch/m68k/include/asm/mc146818rtc_no.h
@@ -0,0 +1,9 @@
+/*
+ * Machine dependent access functions for RTC registers.
+ */
+#ifndef _M68KNOMMU_MC146818RTC_H
+#define _M68KNOMMU_MC146818RTC_H
+
+/* empty include file to satisfy the include in genrtc.c/ide-geometry.c */
+
+#endif /* _M68KNOMMU_MC146818RTC_H */
diff --git a/arch/m68k/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h
new file mode 100644
index 000000000000..c042634fadaa
--- /dev/null
+++ b/arch/m68k/include/asm/mcfcache.h
@@ -0,0 +1,150 @@
+/****************************************************************************/
+
+/*
+ *      mcfcache.h -- ColdFire CPU cache support code
+ *
+ *      (C) Copyright 2004, Greg Ungerer <gerg@snapgear.com>
+ */
+
+/****************************************************************************/
+#ifndef __M68KNOMMU_MCFCACHE_H
+#define __M68KNOMMU_MCFCACHE_H
+/****************************************************************************/
+
+
+/*
+ *      The different ColdFire families have different cache arrangments.
+ *      Everything from a small instruction only cache, to configurable
+ *      data and/or instruction cache, to unified instruction/data, to 
+ *      harvard style separate instruction and data caches.
+ */
+
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272)
+/*
+ *      Simple version 2 core cache. These have instruction cache only,
+ *      we just need to invalidate it and enable it.
+ */
+.macro CACHE_ENABLE
+        movel   #0x01000000,%d0         /* invalidate cache cmd */
+        movec   %d0,%CACR               /* do invalidate cache */
+        movel   #0x80000100,%d0         /* setup cache mask */
+        movec   %d0,%CACR               /* enable cache */
+.endm
+#endif /* CONFIG_M5206 || CONFIG_M5206e || CONFIG_M5272 */
+
+#if defined(CONFIG_M523x) || defined(CONFIG_M527x)
+/*
+ *      New version 2 cores have a configurable split cache arrangement.
+ *      For now I am just enabling instruction cache - but ultimately I
+ *      think a split instruction/data cache would be better.
+ */
+.macro CACHE_ENABLE
+        movel   #0x01400000,%d0
+        movec   %d0,%CACR               /* invalidate cache */
+        nop
+        movel   #0x0000c000,%d0         /* set SDRAM cached only */
+        movec   %d0,%ACR0
+        movel   #0x00000000,%d0         /* no other regions cached */
+        movec   %d0,%ACR1
+        movel   #0x80400100,%d0         /* configure cache */
+        movec   %d0,%CACR               /* enable cache */
+        nop
+.endm
+#endif /* CONFIG_M523x || CONFIG_M527x */
+
+#if defined(CONFIG_M528x)
+.macro CACHE_ENABLE
+        nop
+        movel   #0x01000000, %d0
+        movec   %d0, %CACR              /* Invalidate cache */
+        nop
+        movel   #0x0000c020, %d0        /* Set SDRAM cached only */
+        movec   %d0, %ACR0
+        movel   #0x00000000, %d0        /* No other regions cached */
+        movec   %d0, %ACR1
+        movel   #0x80000200, %d0        /* Setup cache mask */
+        movec   %d0, %CACR              /* Enable cache */
+        nop
+.endm
+#endif /* CONFIG_M528x */
+
+#if defined(CONFIG_M5249) || defined(CONFIG_M5307)
+/*
+ *      The version 3 core cache. Oddly enough the version 2 core 5249
+ *      has the same SDRAM and cache setup as the version 3 cores.
+ *      This is a single unified instruction/data cache.
+ */
+.macro CACHE_ENABLE
+        movel   #0x01000000,%d0         /* invalidate whole cache */
+        movec   %d0,%CACR
+        nop
+#if defined(DEBUGGER_COMPATIBLE_CACHE) || defined(CONFIG_SECUREEDGEMP3)
+        movel   #0x0000c000,%d0         /* set SDRAM cached (write-thru) */
+#else
+        movel   #0x0000c020,%d0         /* set SDRAM cached (copyback) */
+#endif
+        movec   %d0,%ACR0
+        movel   #0x00000000,%d0         /* no other regions cached */
+        movec   %d0,%ACR1
+        movel   #0xa0000200,%d0         /* enable cache */
+        movec   %d0,%CACR
+        nop
+.endm
+#endif /* CONFIG_M5249 || CONFIG_M5307 */
+
+#if defined(CONFIG_M532x)
+.macro CACHE_ENABLE
+        movel   #0x01000000,%d0         /* invalidate cache cmd */
+        movec   %d0,%CACR               /* do invalidate cache */
+        nop
+        movel   #0x4001C000,%d0         /* set SDRAM cached (write-thru) */
+        movec   %d0,%ACR0
+        movel   #0x00000000,%d0         /* no other regions cached */
+        movec   %d0,%ACR1
+        movel   #0x80000200,%d0         /* setup cache mask */
+        movec   %d0,%CACR               /* enable cache */
+        nop
+.endm
+#endif /* CONFIG_M532x */
+
+#if defined(CONFIG_M5407)
+/*
+ *      Version 4 cores have a true harvard style separate instruction
+ *      and data cache. Invalidate and enable cache, also enable write
+ *      buffers and branch accelerator.
+ */
+.macro CACHE_ENABLE
+        movel   #0x01040100,%d0         /* invalidate whole cache */
+        movec   %d0,%CACR
+        nop
+        movel   #0x000fc000,%d0         /* set SDRAM cached only */
+        movec   %d0, %ACR0
+        movel   #0x00000000,%d0         /* no other regions cached */
+        movec   %d0, %ACR1
+        movel   #0x000fc000,%d0         /* set SDRAM cached only */
+        movec   %d0, %ACR2
+        movel   #0x00000000,%d0         /* no other regions cached */
+        movec   %d0, %ACR3
+        movel   #0xb6088400,%d0         /* enable caches */
+        movec   %d0,%CACR
+        nop
+.endm
+#endif /* CONFIG_M5407 */
+
+#if defined(CONFIG_M520x)
+.macro CACHE_ENABLE
+        move.l  #0x01000000,%d0         /* invalidate whole cache */
+        movec   %d0,%CACR
+        nop
+        move.l  #0x0000c000,%d0         /* set SDRAM cached (write-thru) */
+        movec   %d0,%ACR0
+        move.l  #0x00000000,%d0         /* no other regions cached */
+        movec   %d0,%ACR1
+        move.l  #0x80400000,%d0         /* enable 8K instruction cache */
+        movec   %d0,%CACR
+        nop
+.endm
+#endif /* CONFIG_M520x */
+
+/****************************************************************************/
+#endif  /* __M68KNOMMU_MCFCACHE_H */
diff --git a/arch/m68k/include/asm/mcfdma.h b/arch/m68k/include/asm/mcfdma.h
new file mode 100644
index 000000000000..705c52c79cd8
--- /dev/null
+++ b/arch/m68k/include/asm/mcfdma.h
@@ -0,0 +1,144 @@
+/****************************************************************************/
+
+/*
+ *      mcfdma.h -- Coldfire internal DMA support defines.
+ *
+ *      (C) Copyright 1999, Rob Scott (rscott@mtrob.ml.org)
+ */
+
+/****************************************************************************/
+#ifndef mcfdma_h
+#define mcfdma_h
+/****************************************************************************/
+
+
+/*
+ *      Get address specific defines for this Coldfire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define MCFDMA_BASE0            0x200           /* Base address of DMA 0 */
+#define MCFDMA_BASE1            0x240           /* Base address of DMA 1 */
+#elif defined(CONFIG_M5272)
+#define MCFDMA_BASE0            0x0e0           /* Base address of DMA 0 */
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+/* These are relative to the IPSBAR, not MBAR */
+#define MCFDMA_BASE0            0x100           /* Base address of DMA 0 */
+#define MCFDMA_BASE1            0x140           /* Base address of DMA 1 */
+#define MCFDMA_BASE2            0x180           /* Base address of DMA 2 */
+#define MCFDMA_BASE3            0x1C0           /* Base address of DMA 3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFDMA_BASE0            0x300           /* Base address of DMA 0 */
+#define MCFDMA_BASE1            0x340           /* Base address of DMA 1 */
+#define MCFDMA_BASE2            0x380           /* Base address of DMA 2 */
+#define MCFDMA_BASE3            0x3C0           /* Base address of DMA 3 */
+#endif
+
+
+#if !defined(CONFIG_M5272)
+
+/*
+ *      Define the DMA register set addresses.
+ *      Note: these are longword registers, use unsigned long as data type
+ */
+#define MCFDMA_SAR              0x00            /* DMA source address (r/w) */
+#define MCFDMA_DAR              0x01            /* DMA destination adr (r/w) */
+/* these are word registers, use unsigned short data type */
+#define MCFDMA_DCR              0x04            /* DMA control reg (r/w) */
+#define MCFDMA_BCR              0x06            /* DMA byte count reg (r/w) */
+/* these are byte registers, use unsiged char data type */
+#define MCFDMA_DSR              0x10            /* DMA status reg (r/w) */
+#define MCFDMA_DIVR             0x14            /* DMA interrupt vec (r/w) */
+
+/*
+ *      Bit definitions for the DMA Control Register (DCR).
+ */
+#define MCFDMA_DCR_INT          0x8000          /* Enable completion irq */
+#define MCFDMA_DCR_EEXT         0x4000          /* Enable external DMA req */
+#define MCFDMA_DCR_CS           0x2000          /* Enable cycle steal */
+#define MCFDMA_DCR_AA           0x1000          /* Enable auto alignment */
+#define MCFDMA_DCR_BWC_MASK     0x0E00          /* Bandwidth ctl mask */
+#define MCFDMA_DCR_BWC_512      0x0200          /* Bandwidth:   512 Bytes */
+#define MCFDMA_DCR_BWC_1024     0x0400          /* Bandwidth:  1024 Bytes */
+#define MCFDMA_DCR_BWC_2048     0x0600          /* Bandwidth:  2048 Bytes */
+#define MCFDMA_DCR_BWC_4096     0x0800          /* Bandwidth:  4096 Bytes */
+#define MCFDMA_DCR_BWC_8192     0x0a00          /* Bandwidth:  8192 Bytes */
+#define MCFDMA_DCR_BWC_16384    0x0c00          /* Bandwidth: 16384 Bytes */
+#define MCFDMA_DCR_BWC_32768    0x0e00          /* Bandwidth: 32768 Bytes */
+#define MCFDMA_DCR_SAA          0x0100          /* Single Address Access */
+#define MCFDMA_DCR_S_RW         0x0080          /* SAA read/write value */
+#define MCFDMA_DCR_SINC         0x0040          /* Source addr inc enable */
+#define MCFDMA_DCR_SSIZE_MASK   0x0030          /* Src xfer size */
+#define MCFDMA_DCR_SSIZE_LONG   0x0000          /* Src xfer size, 00 = longw */
+#define MCFDMA_DCR_SSIZE_BYTE   0x0010          /* Src xfer size, 01 = byte */
+#define MCFDMA_DCR_SSIZE_WORD   0x0020          /* Src xfer size, 10 = word */
+#define MCFDMA_DCR_SSIZE_LINE   0x0030          /* Src xfer size, 11 = line */
+#define MCFDMA_DCR_DINC         0x0008          /* Dest addr inc enable */
+#define MCFDMA_DCR_DSIZE_MASK   0x0006          /* Dest xfer size */
+#define MCFDMA_DCR_DSIZE_LONG   0x0000          /* Dest xfer size, 00 = long */
+#define MCFDMA_DCR_DSIZE_BYTE   0x0002          /* Dest xfer size, 01 = byte */
+#define MCFDMA_DCR_DSIZE_WORD   0x0004          /* Dest xfer size, 10 = word */
+#define MCFDMA_DCR_DSIZE_LINE   0x0006          /* Dest xfer size, 11 = line */
+#define MCFDMA_DCR_START        0x0001          /* Start transfer */
+
+/*
+ *      Bit definitions for the DMA Status Register (DSR).
+ */
+#define MCFDMA_DSR_CE           0x40            /* Config error */
+#define MCFDMA_DSR_BES          0x20            /* Bus Error on source */
+#define MCFDMA_DSR_BED          0x10            /* Bus Error on dest */
+#define MCFDMA_DSR_REQ          0x04            /* Requests remaining */
+#define MCFDMA_DSR_BSY          0x02            /* Busy */
+#define MCFDMA_DSR_DONE         0x01            /* DMA transfer complete */
+
+#else /* This is an MCF5272 */
+
+#define MCFDMA_DMR        0x00    /* Mode Register (r/w) */
+#define MCFDMA_DIR        0x03    /* Interrupt trigger register (r/w) */
+#define MCFDMA_DSAR       0x03    /* Source Address register (r/w) */
+#define MCFDMA_DDAR       0x04    /* Destination Address register (r/w) */
+#define MCFDMA_DBCR       0x02    /* Byte Count Register (r/w) */
+
+/* Bit definitions for the DMA Mode Register (DMR) */
+#define MCFDMA_DMR_RESET     0x80000000L /* Reset bit */
+#define MCFDMA_DMR_EN        0x40000000L /* DMA enable */
+#define MCFDMA_DMR_RQM       0x000C0000L /* Request Mode Mask */
+#define MCFDMA_DMR_RQM_DUAL  0x000C0000L /* Dual address mode, the only valid mode */
+#define MCFDMA_DMR_DSTM      0x00002000L /* Destination addressing mask */
+#define MCFDMA_DMR_DSTM_SA   0x00000000L /* Destination uses static addressing */
+#define MCFDMA_DMR_DSTM_IA   0x00002000L /* Destination uses incremental addressing */
+#define MCFDMA_DMR_DSTT_UD   0x00000400L /* Destination is user data */
+#define MCFDMA_DMR_DSTT_UC   0x00000800L /* Destination is user code */
+#define MCFDMA_DMR_DSTT_SD   0x00001400L /* Destination is supervisor data */
+#define MCFDMA_DMR_DSTT_SC   0x00001800L /* Destination is supervisor code */
+#define MCFDMA_DMR_DSTS_OFF  0x8         /* offset to the destination size bits */
+#define MCFDMA_DMR_DSTS_LONG 0x00000000L /* Long destination size */
+#define MCFDMA_DMR_DSTS_BYTE 0x00000100L /* Byte destination size */
+#define MCFDMA_DMR_DSTS_WORD 0x00000200L /* Word destination size */
+#define MCFDMA_DMR_DSTS_LINE 0x00000300L /* Line destination size */
+#define MCFDMA_DMR_SRCM      0x00000020L /* Source addressing mask */
+#define MCFDMA_DMR_SRCM_SA   0x00000000L /* Source uses static addressing */
+#define MCFDMA_DMR_SRCM_IA   0x00000020L /* Source uses incremental addressing */
+#define MCFDMA_DMR_SRCT_UD   0x00000004L /* Source is user data */
+#define MCFDMA_DMR_SRCT_UC   0x00000008L /* Source is user code */
+#define MCFDMA_DMR_SRCT_SD   0x00000014L /* Source is supervisor data */
+#define MCFDMA_DMR_SRCT_SC   0x00000018L /* Source is supervisor code */
+#define MCFDMA_DMR_SRCS_OFF  0x0         /* Offset to the source size bits */
+#define MCFDMA_DMR_SRCS_LONG 0x00000000L /* Long source size */
+#define MCFDMA_DMR_SRCS_BYTE 0x00000001L /* Byte source size */
+#define MCFDMA_DMR_SRCS_WORD 0x00000002L /* Word source size */
+#define MCFDMA_DMR_SRCS_LINE 0x00000003L /* Line source size */
+
+/* Bit definitions for the DMA interrupt register (DIR) */
+#define MCFDMA_DIR_INVEN     0x1000 /* Invalid Combination interrupt enable */
+#define MCFDMA_DIR_ASCEN     0x0800 /* Address Sequence Complete (Completion) interrupt enable */
+#define MCFDMA_DIR_TEEN      0x0200 /* Transfer Error interrupt enable */
+#define MCFDMA_DIR_TCEN      0x0100 /* Transfer Complete (a bus transfer, that is) interrupt enable */
+#define MCFDMA_DIR_INV       0x0010 /* Invalid Combination */
+#define MCFDMA_DIR_ASC       0x0008 /* Address Sequence Complete (DMA Completion) */
+#define MCFDMA_DIR_TE        0x0002 /* Transfer Error */
+#define MCFDMA_DIR_TC        0x0001 /* Transfer Complete */
+
+#endif /* !defined(CONFIG_M5272) */ 
+
+/****************************************************************************/
+#endif  /* mcfdma_h */
diff --git a/arch/m68k/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h
new file mode 100644
index 000000000000..319899c47a2c
--- /dev/null
+++ b/arch/m68k/include/asm/mcfmbus.h
@@ -0,0 +1,77 @@
+/****************************************************************************/
+
+/*
+ *      mcfmbus.h -- Coldfire MBUS support defines.
+ *
+ *      (C) Copyright 1999, Martin Floeer (mfloeer@axcent.de) 
+ */
+
+/****************************************************************************/
+
+
+#ifndef mcfmbus_h
+#define mcfmbus_h
+
+
+#define MCFMBUS_BASE            0x280
+#define MCFMBUS_IRQ_VECTOR      0x19
+#define MCFMBUS_IRQ             0x1
+#define MCFMBUS_CLK             0x3f
+#define MCFMBUS_IRQ_LEVEL       0x07    /*IRQ Level 1*/
+#define MCFMBUS_ADDRESS         0x01
+
+
+/*
+*       Define the 5307 MBUS register set addresses
+*/
+
+#define MCFMBUS_MADR    0x00
+#define MCFMBUS_MFDR    0x04
+#define MCFMBUS_MBCR    0x08
+#define MCFMBUS_MBSR    0x0C
+#define MCFMBUS_MBDR    0x10
+
+
+#define MCFMBUS_MADR_ADDR(a)    (((a)&0x7F)<<0x01) /*Slave Address*/
+
+#define MCFMBUS_MFDR_MBC(a)     ((a)&0x3F)         /*M-Bus Clock*/
+
+/*
+*       Define bit flags in Control Register
+*/
+
+#define MCFMBUS_MBCR_MEN           (0x80)  /* M-Bus Enable                 */
+#define MCFMBUS_MBCR_MIEN          (0x40)  /* M-Bus Interrupt Enable       */
+#define MCFMBUS_MBCR_MSTA          (0x20)  /* Master/Slave Mode Select Bit */
+#define MCFMBUS_MBCR_MTX           (0x10)  /* Transmit/Rcv Mode Select Bit */
+#define MCFMBUS_MBCR_TXAK          (0x08)  /* Transmit Acknowledge Enable  */
+#define MCFMBUS_MBCR_RSTA          (0x04)  /* Repeat Start                 */
+
+/*
+*       Define bit flags in Status Register
+*/
+
+#define MCFMBUS_MBSR_MCF           (0x80)  /* Data Transfer Complete       */
+#define MCFMBUS_MBSR_MAAS          (0x40)  /* Addressed as a Slave         */
+#define MCFMBUS_MBSR_MBB           (0x20)  /* Bus Busy                     */
+#define MCFMBUS_MBSR_MAL           (0x10)  /* Arbitration Lost             */
+#define MCFMBUS_MBSR_SRW           (0x04)  /* Slave Transmit               */
+#define MCFMBUS_MBSR_MIF           (0x02)  /* M-Bus Interrupt              */
+#define MCFMBUS_MBSR_RXAK          (0x01)  /* No Acknowledge Received      */
+
+/*
+*       Define bit flags in DATA I/O Register
+*/
+
+#define MCFMBUS_MBDR_READ          (0x01)  /* 1=read 0=write MBUS */
+
+#define MBUSIOCSCLOCK           1
+#define MBUSIOCGCLOCK           2
+#define MBUSIOCSADDR                    3
+#define MBUSIOCGADDR                    4
+#define MBUSIOCSSLADDR                  5
+#define MBUSIOCGSLADDR                  6
+#define MBUSIOCSSUBADDR                 7
+#define MBUSIOCGSUBADDR                 8
+
+#endif
diff --git a/arch/m68k/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h
new file mode 100644
index 000000000000..431f63aadd0e
--- /dev/null
+++ b/arch/m68k/include/asm/mcfne.h
@@ -0,0 +1,325 @@
+/****************************************************************************/
+
+/*
+ *      mcfne.h -- NE2000 in ColdFire eval boards.
+ *
+ *      (C) Copyright 1999-2000, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000,      Lineo (www.lineo.com)
+ *      (C) Copyright 2001,      SnapGear (www.snapgear.com)
+ *
+ *      19990409 David W. Miller  Converted from m5206ne.h for 5307 eval board
+ *
+ *      Hacked support for m5206e Cadre III evaluation board
+ *      Fred Stevens (fred.stevens@pemstar.com) 13 April 1999
+ */
+
+/****************************************************************************/
+#ifndef mcfne_h
+#define mcfne_h
+/****************************************************************************/
+
+
+/*
+ *      Support for NE2000 clones devices in ColdFire based boards.
+ *      Not all boards address these parts the same way, some use a
+ *      direct addressing method, others use a side-band address space
+ *      to access odd address registers, some require byte swapping
+ *      others do not.
+ */
+#define BSWAP(w)        (((w) << 8) | ((w) >> 8))
+#define RSWAP(w)        (w)
+
+
+/*
+ *      Define the basic hardware resources of NE2000 boards.
+ */
+
+#if defined(CONFIG_ARN5206)
+#define NE2000_ADDR             0x40000300
+#define NE2000_ODDOFFSET        0x00010000
+#define NE2000_IRQ_VECTOR       0xf0
+#define NE2000_IRQ_PRIORITY     2
+#define NE2000_IRQ_LEVEL        4
+#define NE2000_BYTE             volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206eC3)
+#define NE2000_ADDR             0x40000300
+#define NE2000_ODDOFFSET        0x00010000
+#define NE2000_IRQ_VECTOR       0x1c
+#define NE2000_IRQ_PRIORITY     2
+#define NE2000_IRQ_LEVEL        4
+#define NE2000_BYTE             volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+#define NE2000_ADDR             0x30000300
+#define NE2000_IRQ_VECTOR       25
+#define NE2000_IRQ_PRIORITY     1
+#define NE2000_IRQ_LEVEL        3
+#define NE2000_BYTE             volatile unsigned char
+#endif
+
+#if defined(CONFIG_M5307C3)
+#define NE2000_ADDR             0x40000300
+#define NE2000_ODDOFFSET        0x00010000
+#define NE2000_IRQ_VECTOR       0x1b
+#define NE2000_BYTE             volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+#define NE2000_ADDR             0x30600300
+#define NE2000_ODDOFFSET        0x00008000
+#define NE2000_IRQ_VECTOR       67
+#undef  BSWAP
+#define BSWAP(w)                (w)
+#define NE2000_BYTE             volatile unsigned short
+#undef  RSWAP
+#define RSWAP(w)                (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_NETtel)
+#define NE2000_ADDR0            0x30600300
+#define NE2000_ADDR1            0x30800300
+#define NE2000_ODDOFFSET        0x00008000
+#define NE2000_IRQ_VECTOR0      27
+#define NE2000_IRQ_VECTOR1      29
+#undef  BSWAP
+#define BSWAP(w)                (w)
+#define NE2000_BYTE             volatile unsigned short
+#undef  RSWAP
+#define RSWAP(w)                (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_M5307) && defined(CONFIG_SECUREEDGEMP3)
+#define NE2000_ADDR             0x30600300
+#define NE2000_ODDOFFSET        0x00008000
+#define NE2000_IRQ_VECTOR       27
+#undef  BSWAP
+#define BSWAP(w)                (w)
+#define NE2000_BYTE             volatile unsigned short
+#undef  RSWAP
+#define RSWAP(w)                (((w) << 8) | ((w) >> 8))
+#endif
+
+#if defined(CONFIG_ARN5307)
+#define NE2000_ADDR             0xfe600300
+#define NE2000_ODDOFFSET        0x00010000
+#define NE2000_IRQ_VECTOR       0x1b
+#define NE2000_IRQ_PRIORITY     2
+#define NE2000_IRQ_LEVEL        3
+#define NE2000_BYTE             volatile unsigned short
+#endif
+
+#if defined(CONFIG_M5407C3)
+#define NE2000_ADDR             0x40000300
+#define NE2000_ODDOFFSET        0x00010000
+#define NE2000_IRQ_VECTOR       0x1b
+#define NE2000_BYTE             volatile unsigned short
+#endif
+
+/****************************************************************************/
+
+/*
+ *      Side-band address space for odd address requires re-mapping
+ *      many of the standard ISA access functions.
+ */
+#ifdef NE2000_ODDOFFSET
+
+#undef outb
+#undef outb_p
+#undef inb
+#undef inb_p
+#undef outsb
+#undef outsw
+#undef insb
+#undef insw
+
+#define outb    ne2000_outb
+#define inb     ne2000_inb
+#define outb_p  ne2000_outb
+#define inb_p   ne2000_inb
+#define outsb   ne2000_outsb
+#define outsw   ne2000_outsw
+#define insb    ne2000_insb
+#define insw    ne2000_insw
+
+
+#ifndef COLDFIRE_NE2000_FUNCS
+
+void ne2000_outb(unsigned int val, unsigned int addr);
+int  ne2000_inb(unsigned int addr);
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len);
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsb(unsigned int addr, void *vbuf, unsigned long len);
+void ne2000_outsw(unsigned int addr, void *vbuf, unsigned long len);
+
+#else
+
+/*
+ *      This macro converts a conventional register address into the
+ *      real memory pointer of the mapped NE2000 device.
+ *      On most NE2000 implementations on ColdFire boards the chip is
+ *      mapped in kinda funny, due to its ISA heritage.
+ */
+#define NE2000_PTR(addr)        ((addr&0x1)?(NE2000_ODDOFFSET+addr-1):(addr))
+#define NE2000_DATA_PTR(addr)   (addr)
+
+
+void ne2000_outb(unsigned int val, unsigned int addr)
+{
+        NE2000_BYTE     *rp;
+
+        rp = (NE2000_BYTE *) NE2000_PTR(addr);
+        *rp = RSWAP(val);
+}
+
+int ne2000_inb(unsigned int addr)
+{
+        NE2000_BYTE     *rp, val;
+
+        rp = (NE2000_BYTE *) NE2000_PTR(addr);
+        val = *rp;
+        return((int) ((NE2000_BYTE) RSWAP(val)));
+}
+
+void ne2000_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+        NE2000_BYTE     *rp, val;
+        unsigned char   *buf;
+
+        buf = (unsigned char *) vbuf;
+        rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+        for (; (len > 0); len--) {
+                val = *rp;
+                *buf++ = RSWAP(val);
+        }
+}
+
+void ne2000_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+        volatile unsigned short *rp;
+        unsigned short          w, *buf;
+
+        buf = (unsigned short *) vbuf;
+        rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+        for (; (len > 0); len--) {
+                w = *rp;
+                *buf++ = BSWAP(w);
+        }
+}
+
+void ne2000_outsb(unsigned int addr, const void *vbuf, unsigned long len)
+{
+        NE2000_BYTE     *rp, val;
+        unsigned char   *buf;
+
+        buf = (unsigned char *) vbuf;
+        rp = (NE2000_BYTE *) NE2000_DATA_PTR(addr);
+        for (; (len > 0); len--) {
+                val = *buf++;
+                *rp = RSWAP(val);
+        }
+}
+
+void ne2000_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+        volatile unsigned short *rp;
+        unsigned short          w, *buf;
+
+        buf = (unsigned short *) vbuf;
+        rp = (volatile unsigned short *) NE2000_DATA_PTR(addr);
+        for (; (len > 0); len--) {
+                w = *buf++;
+                *rp = BSWAP(w);
+        }
+}
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+#endif /* NE2000_OFFOFFSET */
+
+/****************************************************************************/
+
+#ifdef COLDFIRE_NE2000_FUNCS
+
+/*
+ *      Lastly the interrupt set up code...
+ *      Minor differences between the different board types.
+ */
+
+#if defined(CONFIG_ARN5206)
+void ne2000_irqsetup(int irq)
+{
+        volatile unsigned char  *icrp;
+
+        icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+        *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2;
+        mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206eC3)
+void ne2000_irqsetup(int irq)
+{
+        volatile unsigned char  *icrp;
+
+        icrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_ICR4);
+        *icrp = MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI2 | MCFSIM_ICR_AUTOVEC;
+        mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT4);
+}
+#endif
+
+#if defined(CONFIG_M5206e) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+        mcf_autovector(irq);
+}
+#endif
+
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+void ne2000_irqsetup(int irq)
+{
+        volatile unsigned long  *icrp;
+        volatile unsigned long  *pitr;
+
+        /* The NE2000 device uses external IRQ3 */
+        icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+        *icrp = (*icrp & 0x77077777) | 0x00d00000;
+
+        pitr = (volatile unsigned long *) (MCF_MBAR + MCFSIM_PITR);
+        *pitr = *pitr | 0x20000000;
+}
+
+void ne2000_irqack(int irq)
+{
+        volatile unsigned long  *icrp;
+
+        /* The NE2000 device uses external IRQ3 */
+        icrp = (volatile unsigned long *) (MCF_MBAR + MCFSIM_ICR1);
+        *icrp = (*icrp & 0x77777777) | 0x00800000;
+}
+#endif
+
+#if defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+
+void ne2000_irqsetup(int irq)
+{
+        mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+        mcf_autovector(irq);
+}
+
+#else
+
+void ne2000_irqsetup(int irq)
+{
+        mcf_setimr(mcf_getimr() & ~MCFSIM_IMR_EINT3);
+}
+
+#endif /* ! CONFIG_NETtel || CONFIG_SECUREEDGEMP3 */
+#endif /* CONFIG_M5307 || CONFIG_M5407 */
+
+#endif /* COLDFIRE_NE2000_FUNCS */
+
+/****************************************************************************/
+#endif  /* mcfne_h */
diff --git a/arch/m68k/include/asm/mcfpci.h b/arch/m68k/include/asm/mcfpci.h
new file mode 100644
index 000000000000..f1507dd06ec6
--- /dev/null
+++ b/arch/m68k/include/asm/mcfpci.h
@@ -0,0 +1,119 @@
+/****************************************************************************/
+
+/*
+ *      mcfpci.h -- PCI bridge on ColdFire eval boards.
+ *
+ *      (C) Copyright 2000, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000, Lineo Inc. (www.lineo.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfpci_h
+#define mcfpci_h
+/****************************************************************************/
+
+
+#ifdef CONFIG_PCI
+
+/*
+ *      Address regions in the PCI address space are not mapped into the
+ *      normal memory space of the ColdFire. They must be accessed via
+ *      handler routines. This is easy for I/O space (inb/outb/etc) but
+ *      needs some code changes to support ordinary memory. Interrupts
+ *      also need to be vectored through the PCI handler first, then it
+ *      will call the actual driver sub-handlers.
+ */
+
+/*
+ *      Un-define all the standard I/O access routines.
+ */
+#undef  inb
+#undef  inw
+#undef  inl
+#undef  inb_p
+#undef  inw_p
+#undef  insb
+#undef  insw
+#undef  insl
+#undef  outb
+#undef  outw
+#undef  outl
+#undef  outb_p
+#undef  outw_p
+#undef  outsb
+#undef  outsw
+#undef  outsl
+
+#undef  request_irq
+#undef  free_irq
+
+#undef  bus_to_virt
+#undef  virt_to_bus
+
+
+/*
+ *      Re-direct all I/O memory accesses functions to PCI specific ones.
+ */
+#define inb     pci_inb
+#define inw     pci_inw
+#define inl     pci_inl
+#define inb_p   pci_inb
+#define inw_p   pci_inw
+#define insb    pci_insb
+#define insw    pci_insw
+#define insl    pci_insl
+
+#define outb    pci_outb
+#define outw    pci_outw
+#define outl    pci_outl
+#define outb_p  pci_outb
+#define outw_p  pci_outw
+#define outsb   pci_outsb
+#define outsw   pci_outsw
+#define outsl   pci_outsl
+
+#define request_irq     pci_request_irq
+#define free_irq        pci_free_irq
+
+#define virt_to_bus     pci_virt_to_bus
+#define bus_to_virt     pci_bus_to_virt
+
+#define CONFIG_COMEMPCI 1
+
+
+/*
+ *      Prototypes of the real PCI functions (defined in bios32.c).
+ */
+unsigned char   pci_inb(unsigned int addr);
+unsigned short  pci_inw(unsigned int addr);
+unsigned int    pci_inl(unsigned int addr);
+void            pci_insb(void *addr, void *buf, int len);
+void            pci_insw(void *addr, void *buf, int len);
+void            pci_insl(void *addr, void *buf, int len);
+
+void            pci_outb(unsigned char val, unsigned int addr);
+void            pci_outw(unsigned short val, unsigned int addr);
+void            pci_outl(unsigned int val, unsigned int addr);
+void            pci_outsb(void *addr, void *buf, int len);
+void            pci_outsw(void *addr, void *buf, int len);
+void            pci_outsl(void *addr, void *buf, int len);
+
+int             pci_request_irq(unsigned int irq,
+                        void (*handler)(int, void *, struct pt_regs *),
+                        unsigned long flags,
+                        const char *device,
+                        void *dev_id);
+void            pci_free_irq(unsigned int irq, void *dev_id);
+
+void            *pci_bmalloc(int size);
+void            pci_bmfree(void *bmp, int len);
+void            pci_copytoshmem(unsigned long bmp, void *src, int size);
+void            pci_copyfromshmem(void *dst, unsigned long bmp, int size);
+unsigned long   pci_virt_to_bus(volatile void *address);
+void            *pci_bus_to_virt(unsigned long address);
+void            pci_bmcpyto(void *dst, void *src, int len);
+void            pci_bmcpyfrom(void *dst, void *src, int len);
+
+#endif /* CONFIG_PCI */
+/****************************************************************************/
+#endif  /* mcfpci_h */
diff --git a/arch/m68k/include/asm/mcfpit.h b/arch/m68k/include/asm/mcfpit.h
new file mode 100644
index 000000000000..f570cf64fd29
--- /dev/null
+++ b/arch/m68k/include/asm/mcfpit.h
@@ -0,0 +1,64 @@
+/****************************************************************************/
+
+/*
+ *      mcfpit.h -- ColdFire internal PIT timer support defines.
+ *
+ *      (C) Copyright 2003, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef mcfpit_h
+#define mcfpit_h
+/****************************************************************************/
+
+
+/*
+ *      Get address specific defines for the 5270/5271, 5280/5282, and 5208.
+ */
+#if defined(CONFIG_M520x)
+#define MCFPIT_BASE1            0x00080000      /* Base address of TIMER1 */
+#define MCFPIT_BASE2            0x00084000      /* Base address of TIMER2 */
+#else
+#define MCFPIT_BASE1            0x00150000      /* Base address of TIMER1 */
+#define MCFPIT_BASE2            0x00160000      /* Base address of TIMER2 */
+#define MCFPIT_BASE3            0x00170000      /* Base address of TIMER3 */
+#define MCFPIT_BASE4            0x00180000      /* Base address of TIMER4 */
+#endif
+
+/*
+ *      Define the PIT timer register set addresses.
+ */
+#define MCFPIT_PCSR             0x0             /* PIT control register */
+#define MCFPIT_PMR              0x2             /* PIT modulus register */
+#define MCFPIT_PCNTR            0x4             /* PIT count register */
+
+/*
+ *      Bit definitions for the PIT Control and Status register.
+ */
+#define MCFPIT_PCSR_CLK1        0x0000          /* System clock divisor */
+#define MCFPIT_PCSR_CLK2        0x0100          /* System clock divisor */
+#define MCFPIT_PCSR_CLK4        0x0200          /* System clock divisor */
+#define MCFPIT_PCSR_CLK8        0x0300          /* System clock divisor */
+#define MCFPIT_PCSR_CLK16       0x0400          /* System clock divisor */
+#define MCFPIT_PCSR_CLK32       0x0500          /* System clock divisor */
+#define MCFPIT_PCSR_CLK64       0x0600          /* System clock divisor */
+#define MCFPIT_PCSR_CLK128      0x0700          /* System clock divisor */
+#define MCFPIT_PCSR_CLK256      0x0800          /* System clock divisor */
+#define MCFPIT_PCSR_CLK512      0x0900          /* System clock divisor */
+#define MCFPIT_PCSR_CLK1024     0x0a00          /* System clock divisor */
+#define MCFPIT_PCSR_CLK2048     0x0b00          /* System clock divisor */
+#define MCFPIT_PCSR_CLK4096     0x0c00          /* System clock divisor */
+#define MCFPIT_PCSR_CLK8192     0x0d00          /* System clock divisor */
+#define MCFPIT_PCSR_CLK16384    0x0e00          /* System clock divisor */
+#define MCFPIT_PCSR_CLK32768    0x0f00          /* System clock divisor */
+#define MCFPIT_PCSR_DOZE        0x0040          /* Clock run in doze mode */
+#define MCFPIT_PCSR_HALTED      0x0020          /* Clock run in halt mode */
+#define MCFPIT_PCSR_OVW         0x0010          /* Overwrite PIT counter now */
+#define MCFPIT_PCSR_PIE         0x0008          /* Enable PIT interrupt */
+#define MCFPIT_PCSR_PIF         0x0004          /* PIT interrupt flag */
+#define MCFPIT_PCSR_RLD         0x0002          /* Reload counter */
+#define MCFPIT_PCSR_EN          0x0001          /* Enable PIT */
+#define MCFPIT_PCSR_DISABLE     0x0000          /* Disable PIT */
+
+/****************************************************************************/
+#endif  /* mcfpit_h */
diff --git a/arch/m68k/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h
new file mode 100644
index 000000000000..da3f2ceff3a4
--- /dev/null
+++ b/arch/m68k/include/asm/mcfsim.h
@@ -0,0 +1,126 @@
+/****************************************************************************/
+
+/*
+ *      mcfsim.h -- ColdFire System Integration Module support.
+ *
+ *      (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfsim_h
+#define mcfsim_h
+/****************************************************************************/
+
+
+/*
+ *      Include 5204, 5206/e, 5235, 5249, 5270/5271, 5272, 5280/5282,
+ *      5307 or 5407 specific addresses.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#include <asm/m5206sim.h>
+#elif defined(CONFIG_M520x)
+#include <asm/m520xsim.h>
+#elif defined(CONFIG_M523x)
+#include <asm/m523xsim.h>
+#elif defined(CONFIG_M5249)
+#include <asm/m5249sim.h>
+#elif defined(CONFIG_M527x)
+#include <asm/m527xsim.h>
+#elif defined(CONFIG_M5272)
+#include <asm/m5272sim.h>
+#elif defined(CONFIG_M528x)
+#include <asm/m528xsim.h>
+#elif defined(CONFIG_M5307)
+#include <asm/m5307sim.h>
+#elif defined(CONFIG_M532x)
+#include <asm/m532xsim.h>
+#elif defined(CONFIG_M5407)
+#include <asm/m5407sim.h>
+#endif
+
+
+/*
+ *      Define the base address of the SIM within the MBAR address space.
+ */
+#define MCFSIM_BASE             0x0             /* Base address of SIM */
+
+
+/*
+ *      Bit definitions for the ICR family of registers.
+ */
+#define MCFSIM_ICR_AUTOVEC      0x80            /* Auto-vectored intr */
+#define MCFSIM_ICR_LEVEL0       0x00            /* Level 0 intr */
+#define MCFSIM_ICR_LEVEL1       0x04            /* Level 1 intr */
+#define MCFSIM_ICR_LEVEL2       0x08            /* Level 2 intr */
+#define MCFSIM_ICR_LEVEL3       0x0c            /* Level 3 intr */
+#define MCFSIM_ICR_LEVEL4       0x10            /* Level 4 intr */
+#define MCFSIM_ICR_LEVEL5       0x14            /* Level 5 intr */
+#define MCFSIM_ICR_LEVEL6       0x18            /* Level 6 intr */
+#define MCFSIM_ICR_LEVEL7       0x1c            /* Level 7 intr */
+
+#define MCFSIM_ICR_PRI0         0x00            /* Priority 0 intr */
+#define MCFSIM_ICR_PRI1         0x01            /* Priority 1 intr */
+#define MCFSIM_ICR_PRI2         0x02            /* Priority 2 intr */
+#define MCFSIM_ICR_PRI3         0x03            /* Priority 3 intr */
+
+/*
+ *      Bit definitions for the Interrupt Mask register (IMR).
+ */
+#define MCFSIM_IMR_EINT1        0x0002          /* External intr # 1 */
+#define MCFSIM_IMR_EINT2        0x0004          /* External intr # 2 */
+#define MCFSIM_IMR_EINT3        0x0008          /* External intr # 3 */
+#define MCFSIM_IMR_EINT4        0x0010          /* External intr # 4 */
+#define MCFSIM_IMR_EINT5        0x0020          /* External intr # 5 */
+#define MCFSIM_IMR_EINT6        0x0040          /* External intr # 6 */
+#define MCFSIM_IMR_EINT7        0x0080          /* External intr # 7 */
+
+#define MCFSIM_IMR_SWD          0x0100          /* Software Watchdog intr */
+#define MCFSIM_IMR_TIMER1       0x0200          /* TIMER 1 intr */
+#define MCFSIM_IMR_TIMER2       0x0400          /* TIMER 2 intr */
+#define MCFSIM_IMR_MBUS         0x0800          /* MBUS intr    */
+#define MCFSIM_IMR_UART1        0x1000          /* UART 1 intr */
+#define MCFSIM_IMR_UART2        0x2000          /* UART 2 intr */
+
+#if defined(CONFIG_M5206e)
+#define MCFSIM_IMR_DMA1         0x4000          /* DMA 1 intr */
+#define MCFSIM_IMR_DMA2         0x8000          /* DMA 2 intr */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307)
+#define MCFSIM_IMR_DMA0         0x4000          /* DMA 0 intr */
+#define MCFSIM_IMR_DMA1         0x8000          /* DMA 1 intr */
+#define MCFSIM_IMR_DMA2         0x10000         /* DMA 2 intr */
+#define MCFSIM_IMR_DMA3         0x20000         /* DMA 3 intr */
+#endif
+
+/*
+ *      Mask for all of the SIM devices. Some parts have more or less
+ *      SIM devices. This is a catchall for the sandard set.
+ */
+#ifndef MCFSIM_IMR_MASKALL
+#define MCFSIM_IMR_MASKALL      0x3ffe          /* All intr sources */
+#endif
+
+
+/*
+ *      PIT interrupt settings, if not found in mXXXXsim.h file.
+ */
+#ifndef ICR_INTRCONF
+#define ICR_INTRCONF            0x2b            /* PIT1 level 5, priority 3 */
+#endif
+#ifndef MCFPIT_IMR
+#define MCFPIT_IMR              MCFINTC_IMRH
+#endif
+#ifndef MCFPIT_IMR_IBIT
+#define MCFPIT_IMR_IBIT         (1 << (MCFINT_PIT1 - 32))
+#endif
+
+
+#ifndef __ASSEMBLY__
+/*
+ *      Definition for the interrupt auto-vectoring support.
+ */
+extern void     mcf_autovector(unsigned int vec);
+#endif /* __ASSEMBLY__ */
+
+/****************************************************************************/
+#endif  /* mcfsim_h */
diff --git a/arch/m68k/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h
new file mode 100644
index 000000000000..2d7a4dbd9683
--- /dev/null
+++ b/arch/m68k/include/asm/mcfsmc.h
@@ -0,0 +1,187 @@
+/****************************************************************************/
+
+/*
+ *      mcfsmc.h -- SMC ethernet support for ColdFire environments.
+ *
+ *      (C) Copyright 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfsmc_h
+#define mcfsmc_h
+/****************************************************************************/
+
+/*
+ *      None of the current ColdFire targets that use the SMC91x111
+ *      allow 8 bit accesses. So this code is 16bit access only.
+ */
+
+
+#undef  outb
+#undef  inb
+#undef  outw
+#undef  outwd
+#undef  inw     
+#undef  outl
+#undef  inl
+
+#undef  outsb
+#undef  outsw
+#undef  outsl
+#undef  insb
+#undef  insw
+#undef  insl
+
+/*
+ *      Re-defines for ColdFire environment... The SMC part is
+ *      mapped into memory space, so remap the PC-style in/out
+ *      routines to handle that.
+ */
+#define outb    smc_outb
+#define inb     smc_inb
+#define outw    smc_outw
+#define outwd   smc_outwd
+#define inw     smc_inw
+#define outl    smc_outl
+#define inl     smc_inl
+
+#define outsb   smc_outsb
+#define outsw   smc_outsw
+#define outsl   smc_outsl
+#define insb    smc_insb
+#define insw    smc_insw
+#define insl    smc_insl
+
+
+static inline int smc_inb(unsigned int addr)
+{
+        register unsigned short w;
+        w = *((volatile unsigned short *) (addr & ~0x1));
+        return(((addr & 0x1) ? w : (w >> 8)) & 0xff);
+}
+
+static inline void smc_outw(unsigned int val, unsigned int addr)
+{
+        *((volatile unsigned short *) addr) = (val << 8) | (val >> 8);
+}
+
+static inline int smc_inw(unsigned int addr)
+{
+        register unsigned short w;
+        w = *((volatile unsigned short *) addr);
+        return(((w << 8) | (w >> 8)) & 0xffff);
+}
+
+static inline void smc_outl(unsigned long val, unsigned int addr)
+{
+        *((volatile unsigned long *) addr) = 
+                ((val << 8) & 0xff000000) | ((val >> 8) & 0x00ff0000) |
+                ((val << 8) & 0x0000ff00) | ((val >> 8) & 0x000000ff);
+}
+
+static inline void smc_outwd(unsigned int val, unsigned int addr)
+{
+        *((volatile unsigned short *) addr) = val;
+}
+
+
+/*
+ *      The rep* functions are used to feed the data port with
+ *      raw data. So we do not byte swap them when copying.
+ */
+
+static inline void smc_insb(unsigned int addr, void *vbuf, int unsigned long len)
+{
+        volatile unsigned short *rp;
+        unsigned short          *buf, *ebuf;
+
+        buf = (unsigned short *) vbuf;
+        rp = (volatile unsigned short *) addr;
+
+        /* Copy as words for as long as possible */
+        for (ebuf = buf + (len >> 1); (buf < ebuf); )
+                *buf++ = *rp;
+
+        /* Lastly, handle left over byte */
+        if (len & 0x1)
+                *((unsigned char *) buf) = (*rp >> 8) & 0xff;
+}
+
+static inline void smc_insw(unsigned int addr, void *vbuf, unsigned long len)
+{
+        volatile unsigned short *rp;
+        unsigned short          *buf, *ebuf;
+
+        buf = (unsigned short *) vbuf;
+        rp = (volatile unsigned short *) addr;
+        for (ebuf = buf + len; (buf < ebuf); )
+                *buf++ = *rp;
+}
+
+static inline void smc_insl(unsigned int addr, void *vbuf, unsigned long len)
+{
+        volatile unsigned long  *rp;
+        unsigned long           *buf, *ebuf;
+
+        buf = (unsigned long *) vbuf;
+        rp = (volatile unsigned long *) addr;
+        for (ebuf = buf + len; (buf < ebuf); )
+                *buf++ = *rp;
+}
+
+static inline void smc_outsw(unsigned int addr, const void *vbuf, unsigned long len)
+{
+        volatile unsigned short *rp;
+        unsigned short          *buf, *ebuf;
+
+        buf = (unsigned short *) vbuf;
+        rp = (volatile unsigned short *) addr;
+        for (ebuf = buf + len; (buf < ebuf); )
+                *rp = *buf++;
+}
+
+static inline void smc_outsl(unsigned int addr, void *vbuf, unsigned long len)
+{
+        volatile unsigned long  *rp;
+        unsigned long           *buf, *ebuf;
+
+        buf = (unsigned long *) vbuf;
+        rp = (volatile unsigned long *) addr;
+        for (ebuf = buf + len; (buf < ebuf); )
+                *rp = *buf++;
+}
+
+
+#ifdef CONFIG_NETtel
+/*
+ *      Re-map the address space of at least one of the SMC ethernet
+ *      parts. Both parts power up decoding the same address, so we
+ *      need to move one of them first, before doing enything else.
+ *
+ *      We also increase the number of wait states for this part by one.
+ */
+
+void smc_remap(unsigned int ioaddr)
+{
+        static int              once = 0;
+        extern unsigned short   ppdata;
+        if (once++ == 0) {
+                *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADDR)) = 0x00ec;
+                ppdata |= 0x0080;
+                *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+                outw(0x0001, ioaddr + BANK_SELECT);
+                outw(0x0001, ioaddr + BANK_SELECT);
+                outw(0x0067, ioaddr + BASE);
+
+                ppdata &= ~0x0080;
+                *((volatile unsigned short *)(MCF_MBAR+MCFSIM_PADAT)) = ppdata;
+        }
+        
+        *((volatile unsigned short *)(MCF_MBAR+MCFSIM_CSCR3)) = 0x1180;
+}
+
+#endif
+
+/****************************************************************************/
+#endif  /* mcfsmc_h */
diff --git a/arch/m68k/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h
new file mode 100644
index 000000000000..0f90f6d2227a
--- /dev/null
+++ b/arch/m68k/include/asm/mcftimer.h
@@ -0,0 +1,80 @@
+/****************************************************************************/
+
+/*
+ *      mcftimer.h -- ColdFire internal TIMER support defines.
+ *
+ *      (C) Copyright 1999-2006, Greg Ungerer <gerg@snapgear.com>
+ *      (C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcftimer_h
+#define mcftimer_h
+/****************************************************************************/
+
+
+/*
+ *      Get address specific defines for this ColdFire member.
+ */
+#if defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#define MCFTIMER_BASE1          0x100           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2          0x120           /* Base address of TIMER2 */
+#elif defined(CONFIG_M5272)
+#define MCFTIMER_BASE1          0x200           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2          0x220           /* Base address of TIMER2 */
+#define MCFTIMER_BASE3          0x240           /* Base address of TIMER4 */
+#define MCFTIMER_BASE4          0x260           /* Base address of TIMER3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#define MCFTIMER_BASE1          0x140           /* Base address of TIMER1 */
+#define MCFTIMER_BASE2          0x180           /* Base address of TIMER2 */
+#elif defined(CONFIG_M532x)
+#define MCFTIMER_BASE1          0xfc070000      /* Base address of TIMER1 */
+#define MCFTIMER_BASE2          0xfc074000      /* Base address of TIMER2 */
+#define MCFTIMER_BASE3          0xfc078000      /* Base address of TIMER3 */
+#define MCFTIMER_BASE4          0xfc07c000      /* Base address of TIMER4 */
+#endif
+
+
+/*
+ *      Define the TIMER register set addresses.
+ */
+#define MCFTIMER_TMR            0x00            /* Timer Mode reg (r/w) */
+#define MCFTIMER_TRR            0x04            /* Timer Reference (r/w) */
+#define MCFTIMER_TCR            0x08            /* Timer Capture reg (r/w) */
+#define MCFTIMER_TCN            0x0C            /* Timer Counter reg (r/w) */
+#if defined(CONFIG_M532x)
+#define MCFTIMER_TER            0x03            /* Timer Event reg (r/w) */
+#else
+#define MCFTIMER_TER            0x11            /* Timer Event reg (r/w) */
+#endif
+
+/*
+ *      Bit definitions for the Timer Mode Register (TMR).
+ *      Register bit flags are common accross ColdFires.
+ */
+#define MCFTIMER_TMR_PREMASK    0xff00          /* Prescalar mask */
+#define MCFTIMER_TMR_DISCE      0x0000          /* Disable capture */
+#define MCFTIMER_TMR_ANYCE      0x00c0          /* Capture any edge */
+#define MCFTIMER_TMR_FALLCE     0x0080          /* Capture fallingedge */
+#define MCFTIMER_TMR_RISECE     0x0040          /* Capture rising edge */
+#define MCFTIMER_TMR_ENOM       0x0020          /* Enable output toggle */
+#define MCFTIMER_TMR_DISOM      0x0000          /* Do single output pulse  */
+#define MCFTIMER_TMR_ENORI      0x0010          /* Enable ref interrupt */
+#define MCFTIMER_TMR_DISORI     0x0000          /* Disable ref interrupt */
+#define MCFTIMER_TMR_RESTART    0x0008          /* Restart counter */
+#define MCFTIMER_TMR_FREERUN    0x0000          /* Free running counter */
+#define MCFTIMER_TMR_CLKTIN     0x0006          /* Input clock is TIN */
+#define MCFTIMER_TMR_CLK16      0x0004          /* Input clock is /16 */
+#define MCFTIMER_TMR_CLK1       0x0002          /* Input clock is /1 */
+#define MCFTIMER_TMR_CLKSTOP    0x0000          /* Stop counter */
+#define MCFTIMER_TMR_ENABLE     0x0001          /* Enable timer */
+#define MCFTIMER_TMR_DISABLE    0x0000          /* Disable timer */
+
+/*
+ *      Bit definitions for the Timer Event Registers (TER).
+ */
+#define MCFTIMER_TER_CAP        0x01            /* Capture event */
+#define MCFTIMER_TER_REF        0x02            /* Refernece event */
+
+/****************************************************************************/
+#endif  /* mcftimer_h */
diff --git a/arch/m68k/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h
new file mode 100644
index 000000000000..ef2293873612
--- /dev/null
+++ b/arch/m68k/include/asm/mcfuart.h
@@ -0,0 +1,216 @@
+/****************************************************************************/
+
+/*
+ *      mcfuart.h -- ColdFire internal UART support defines.
+ *
+ *      (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com)
+ *      (C) Copyright 2000, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfuart_h
+#define mcfuart_h
+/****************************************************************************/
+
+/*
+ *      Define the base address of the UARTS within the MBAR address
+ *      space.
+ */
+#if defined(CONFIG_M5272)
+#define MCFUART_BASE1           0x100           /* Base address of UART1 */
+#define MCFUART_BASE2           0x140           /* Base address of UART2 */
+#elif defined(CONFIG_M5206) || defined(CONFIG_M5206e)
+#if defined(CONFIG_NETtel)
+#define MCFUART_BASE1           0x180           /* Base address of UART1 */
+#define MCFUART_BASE2           0x140           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1           0x140           /* Base address of UART1 */
+#define MCFUART_BASE2           0x180           /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x)
+#define MCFUART_BASE1           0x200           /* Base address of UART1 */
+#define MCFUART_BASE2           0x240           /* Base address of UART2 */
+#define MCFUART_BASE3           0x280           /* Base address of UART3 */
+#elif defined(CONFIG_M5249) || defined(CONFIG_M5307) || defined(CONFIG_M5407)
+#if defined(CONFIG_NETtel) || defined(CONFIG_SECUREEDGEMP3)
+#define MCFUART_BASE1           0x200           /* Base address of UART1 */
+#define MCFUART_BASE2           0x1c0           /* Base address of UART2 */
+#else
+#define MCFUART_BASE1           0x1c0           /* Base address of UART1 */
+#define MCFUART_BASE2           0x200           /* Base address of UART2 */
+#endif
+#elif defined(CONFIG_M520x)
+#define MCFUART_BASE1           0x60000         /* Base address of UART1 */
+#define MCFUART_BASE2           0x64000         /* Base address of UART2 */
+#define MCFUART_BASE3           0x68000         /* Base address of UART2 */
+#elif defined(CONFIG_M532x)
+#define MCFUART_BASE1           0xfc060000      /* Base address of UART1 */
+#define MCFUART_BASE2           0xfc064000      /* Base address of UART2 */
+#define MCFUART_BASE3           0xfc068000      /* Base address of UART3 */
+#endif
+
+
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+struct mcf_platform_uart {
+        unsigned long   mapbase;        /* Physical address base */
+        void __iomem    *membase;       /* Virtual address if mapped */
+        unsigned int    irq;            /* Interrupt vector */
+        unsigned int    uartclk;        /* UART clock rate */
+};
+
+/*
+ *      Define the ColdFire UART register set addresses.
+ */
+#define MCFUART_UMR             0x00            /* Mode register (r/w) */
+#define MCFUART_USR             0x04            /* Status register (r) */
+#define MCFUART_UCSR            0x04            /* Clock Select (w) */
+#define MCFUART_UCR             0x08            /* Command register (w) */
+#define MCFUART_URB             0x0c            /* Receiver Buffer (r) */
+#define MCFUART_UTB             0x0c            /* Transmit Buffer (w) */
+#define MCFUART_UIPCR           0x10            /* Input Port Change (r) */
+#define MCFUART_UACR            0x10            /* Auxiliary Control (w) */
+#define MCFUART_UISR            0x14            /* Interrupt Status (r) */
+#define MCFUART_UIMR            0x14            /* Interrupt Mask (w) */
+#define MCFUART_UBG1            0x18            /* Baud Rate MSB (r/w) */
+#define MCFUART_UBG2            0x1c            /* Baud Rate LSB (r/w) */
+#ifdef  CONFIG_M5272
+#define MCFUART_UTF             0x28            /* Transmitter FIFO (r/w) */
+#define MCFUART_URF             0x2c            /* Receiver FIFO (r/w) */
+#define MCFUART_UFPD            0x30            /* Frac Prec. Divider (r/w) */
+#else
+#define MCFUART_UIVR            0x30            /* Interrupt Vector (r/w) */
+#endif
+#define MCFUART_UIPR            0x34            /* Input Port (r) */
+#define MCFUART_UOP1            0x38            /* Output Port Bit Set (w) */
+#define MCFUART_UOP0            0x3c            /* Output Port Bit Reset (w) */
+
+
+/*
+ *      Define bit flags in Mode Register 1 (MR1).
+ */
+#define MCFUART_MR1_RXRTS       0x80            /* Auto RTS flow control */
+#define MCFUART_MR1_RXIRQFULL   0x40            /* RX IRQ type FULL */
+#define MCFUART_MR1_RXIRQRDY    0x00            /* RX IRQ type RDY */
+#define MCFUART_MR1_RXERRBLOCK  0x20            /* RX block error mode */
+#define MCFUART_MR1_RXERRCHAR   0x00            /* RX char error mode */
+
+#define MCFUART_MR1_PARITYNONE  0x10            /* No parity */
+#define MCFUART_MR1_PARITYEVEN  0x00            /* Even parity */
+#define MCFUART_MR1_PARITYODD   0x04            /* Odd parity */
+#define MCFUART_MR1_PARITYSPACE 0x08            /* Space parity */
+#define MCFUART_MR1_PARITYMARK  0x0c            /* Mark parity */
+
+#define MCFUART_MR1_CS5         0x00            /* 5 bits per char */
+#define MCFUART_MR1_CS6         0x01            /* 6 bits per char */
+#define MCFUART_MR1_CS7         0x02            /* 7 bits per char */
+#define MCFUART_MR1_CS8         0x03            /* 8 bits per char */
+
+/*
+ *      Define bit flags in Mode Register 2 (MR2).
+ */
+#define MCFUART_MR2_LOOPBACK    0x80            /* Loopback mode */
+#define MCFUART_MR2_REMOTELOOP  0xc0            /* Remote loopback mode */
+#define MCFUART_MR2_AUTOECHO    0x40            /* Automatic echo */
+#define MCFUART_MR2_TXRTS       0x20            /* Assert RTS on TX */
+#define MCFUART_MR2_TXCTS       0x10            /* Auto CTS flow control */
+
+#define MCFUART_MR2_STOP1       0x07            /* 1 stop bit */
+#define MCFUART_MR2_STOP15      0x08            /* 1.5 stop bits */
+#define MCFUART_MR2_STOP2       0x0f            /* 2 stop bits */
+
+/*
+ *      Define bit flags in Status Register (USR).
+ */
+#define MCFUART_USR_RXBREAK     0x80            /* Received BREAK */
+#define MCFUART_USR_RXFRAMING   0x40            /* Received framing error */
+#define MCFUART_USR_RXPARITY    0x20            /* Received parity error */
+#define MCFUART_USR_RXOVERRUN   0x10            /* Received overrun error */
+#define MCFUART_USR_TXEMPTY     0x08            /* Transmitter empty */
+#define MCFUART_USR_TXREADY     0x04            /* Transmitter ready */
+#define MCFUART_USR_RXFULL      0x02            /* Receiver full */
+#define MCFUART_USR_RXREADY     0x01            /* Receiver ready */
+
+#define MCFUART_USR_RXERR       (MCFUART_USR_RXBREAK | MCFUART_USR_RXFRAMING | \
+                                MCFUART_USR_RXPARITY | MCFUART_USR_RXOVERRUN)
+
+/*
+ *      Define bit flags in Clock Select Register (UCSR).
+ */
+#define MCFUART_UCSR_RXCLKTIMER 0xd0            /* RX clock is timer */
+#define MCFUART_UCSR_RXCLKEXT16 0xe0            /* RX clock is external x16 */
+#define MCFUART_UCSR_RXCLKEXT1  0xf0            /* RX clock is external x1 */
+
+#define MCFUART_UCSR_TXCLKTIMER 0x0d            /* TX clock is timer */
+#define MCFUART_UCSR_TXCLKEXT16 0x0e            /* TX clock is external x16 */
+#define MCFUART_UCSR_TXCLKEXT1  0x0f            /* TX clock is external x1 */
+
+/*
+ *      Define bit flags in Command Register (UCR).
+ */
+#define MCFUART_UCR_CMDNULL             0x00    /* No command */
+#define MCFUART_UCR_CMDRESETMRPTR       0x10    /* Reset MR pointer */
+#define MCFUART_UCR_CMDRESETRX          0x20    /* Reset receiver */
+#define MCFUART_UCR_CMDRESETTX          0x30    /* Reset transmitter */
+#define MCFUART_UCR_CMDRESETERR         0x40    /* Reset error status */
+#define MCFUART_UCR_CMDRESETBREAK       0x50    /* Reset BREAK change */
+#define MCFUART_UCR_CMDBREAKSTART       0x60    /* Start BREAK */
+#define MCFUART_UCR_CMDBREAKSTOP        0x70    /* Stop BREAK */
+
+#define MCFUART_UCR_TXNULL      0x00            /* No TX command */
+#define MCFUART_UCR_TXENABLE    0x04            /* Enable TX */
+#define MCFUART_UCR_TXDISABLE   0x08            /* Disable TX */
+#define MCFUART_UCR_RXNULL      0x00            /* No RX command */
+#define MCFUART_UCR_RXENABLE    0x01            /* Enable RX */
+#define MCFUART_UCR_RXDISABLE   0x02            /* Disable RX */
+
+/*
+ *      Define bit flags in Input Port Change Register (UIPCR).
+ */
+#define MCFUART_UIPCR_CTSCOS    0x10            /* CTS change of state */
+#define MCFUART_UIPCR_CTS       0x01            /* CTS value */
+
+/*
+ *      Define bit flags in Input Port Register (UIP).
+ */
+#define MCFUART_UIPR_CTS        0x01            /* CTS value */
+
+/*
+ *      Define bit flags in Output Port Registers (UOP).
+ *      Clear bit by writing to UOP0, set by writing to UOP1.
+ */
+#define MCFUART_UOP_RTS         0x01            /* RTS set or clear */
+
+/*
+ *      Define bit flags in the Auxiliary Control Register (UACR).
+ */
+#define MCFUART_UACR_IEC        0x01            /* Input enable control */
+
+/*
+ *      Define bit flags in Interrupt Status Register (UISR).
+ *      These same bits are used for the Interrupt Mask Register (UIMR).
+ */
+#define MCFUART_UIR_COS         0x80            /* Change of state (CTS) */
+#define MCFUART_UIR_DELTABREAK  0x04            /* Break start or stop */
+#define MCFUART_UIR_RXREADY     0x02            /* Receiver ready */
+#define MCFUART_UIR_TXREADY     0x01            /* Transmitter ready */
+
+#ifdef  CONFIG_M5272
+/*
+ *      Define bit flags in the Transmitter FIFO Register (UTF).
+ */
+#define MCFUART_UTF_TXB         0x1f            /* Transmitter data level */
+#define MCFUART_UTF_FULL        0x20            /* Transmitter fifo full */
+#define MCFUART_UTF_TXS         0xc0            /* Transmitter status */
+
+/*
+ *      Define bit flags in the Receiver FIFO Register (URF).
+ */
+#define MCFUART_URF_RXB         0x1f            /* Receiver data level */
+#define MCFUART_URF_FULL        0x20            /* Receiver fifo full */
+#define MCFUART_URF_RXS         0xc0            /* Receiver status */
+#endif
+
+/****************************************************************************/
+#endif  /* mcfuart_h */
diff --git a/arch/m68k/include/asm/mcfwdebug.h b/arch/m68k/include/asm/mcfwdebug.h
new file mode 100644
index 000000000000..27f70e45d700
--- /dev/null
+++ b/arch/m68k/include/asm/mcfwdebug.h
@@ -0,0 +1,118 @@
+/****************************************************************************/
+
+/*
+ *      mcfdebug.h -- ColdFire Debug Module support.
+ *
+ *      (C) Copyright 2001, Lineo Inc. (www.lineo.com) 
+ */
+
+/****************************************************************************/
+#ifndef mcfdebug_h
+#define mcfdebug_h
+/****************************************************************************/
+
+/* Define the debug module registers */
+#define MCFDEBUG_CSR    0x0                     /* Configuration status         */
+#define MCFDEBUG_BAAR   0x5                     /* BDM address attribute        */
+#define MCFDEBUG_AATR   0x6                     /* Address attribute trigger    */
+#define MCFDEBUG_TDR    0x7                     /* Trigger definition           */
+#define MCFDEBUG_PBR    0x8                     /* PC breakpoint                */
+#define MCFDEBUG_PBMR   0x9                     /* PC breakpoint mask           */
+#define MCFDEBUG_ABHR   0xc                     /* High address breakpoint      */
+#define MCFDEBUG_ABLR   0xd                     /* Low address breakpoint       */
+#define MCFDEBUG_DBR    0xe                     /* Data breakpoint              */
+#define MCFDEBUG_DBMR   0xf                     /* Data breakpoint mask         */
+
+/* Define some handy constants for the trigger definition register */
+#define MCFDEBUG_TDR_TRC_DISP   0x00000000      /* display on DDATA only        */
+#define MCFDEBUG_TDR_TRC_HALT   0x40000000      /* Processor halt on BP         */
+#define MCFDEBUG_TDR_TRC_INTR   0x80000000      /* Debug intr on BP             */
+#define MCFDEBUG_TDR_LXT1       0x00004000      /* TDR level 1                  */
+#define MCFDEBUG_TDR_LXT2       0x00008000      /* TDR level 2                  */
+#define MCFDEBUG_TDR_EBL1       0x00002000      /* Enable breakpoint level 1    */
+#define MCFDEBUG_TDR_EBL2       0x20000000      /* Enable breakpoint level 2    */
+#define MCFDEBUG_TDR_EDLW1      0x00001000      /* Enable data BP longword      */
+#define MCFDEBUG_TDR_EDLW2      0x10000000
+#define MCFDEBUG_TDR_EDWL1      0x00000800      /* Enable data BP lower word    */
+#define MCFDEBUG_TDR_EDWL2      0x08000000
+#define MCFDEBUG_TDR_EDWU1      0x00000400      /* Enable data BP upper word    */
+#define MCFDEBUG_TDR_EDWU2      0x04000000
+#define MCFDEBUG_TDR_EDLL1      0x00000200      /* Enable data BP low low byte  */
+#define MCFDEBUG_TDR_EDLL2      0x02000000
+#define MCFDEBUG_TDR_EDLM1      0x00000100      /* Enable data BP low mid byte  */
+#define MCFDEBUG_TDR_EDLM2      0x01000000
+#define MCFDEBUG_TDR_EDUM1      0x00000080      /* Enable data BP up mid byte   */
+#define MCFDEBUG_TDR_EDUM2      0x00800000
+#define MCFDEBUG_TDR_EDUU1      0x00000040      /* Enable data BP up up byte    */
+#define MCFDEBUG_TDR_EDUU2      0x00400000
+#define MCFDEBUG_TDR_DI1        0x00000020      /* Data BP invert               */
+#define MCFDEBUG_TDR_DI2        0x00200000
+#define MCFDEBUG_TDR_EAI1       0x00000010      /* Enable address BP inverted   */
+#define MCFDEBUG_TDR_EAI2       0x00100000
+#define MCFDEBUG_TDR_EAR1       0x00000008      /* Enable address BP range      */
+#define MCFDEBUG_TDR_EAR2       0x00080000
+#define MCFDEBUG_TDR_EAL1       0x00000004      /* Enable address BP low        */
+#define MCFDEBUG_TDR_EAL2       0x00040000
+#define MCFDEBUG_TDR_EPC1       0x00000002      /* Enable PC BP                 */
+#define MCFDEBUG_TDR_EPC2       0x00020000
+#define MCFDEBUG_TDR_PCI1       0x00000001      /* PC BP invert                 */
+#define MCFDEBUG_TDR_PCI2       0x00010000
+
+/* Constants for the address attribute trigger register */
+#define MCFDEBUG_AAR_RESET      0x00000005
+/* Fields not yet implemented */
+
+/* And some definitions for the writable sections of the CSR */
+#define MCFDEBUG_CSR_RESET      0x00100000
+#define MCFDEBUG_CSR_PSTCLK     0x00020000      /* PSTCLK disable               */
+#define MCFDEBUG_CSR_IPW        0x00010000      /* Inhibit processor writes     */
+#define MCFDEBUG_CSR_MAP        0x00008000      /* Processor refs in emul mode  */
+#define MCFDEBUG_CSR_TRC        0x00004000      /* Emul mode on trace exception */
+#define MCFDEBUG_CSR_EMU        0x00002000      /* Force emulation mode         */
+#define MCFDEBUG_CSR_DDC_READ   0x00000800      /* Debug data control           */
+#define MCFDEBUG_CSR_DDC_WRITE  0x00001000
+#define MCFDEBUG_CSR_UHE        0x00000400      /* User mode halt enable        */
+#define MCFDEBUG_CSR_BTB0       0x00000000      /* Branch target 0 bytes        */
+#define MCFDEBUG_CSR_BTB2       0x00000100      /* Branch target 2 bytes        */
+#define MCFDEBUG_CSR_BTB3       0x00000200      /* Branch target 3 bytes        */
+#define MCFDEBUG_CSR_BTB4       0x00000300      /* Branch target 4 bytes        */
+#define MCFDEBUG_CSR_NPL        0x00000040      /* Non-pipelined mode           */
+#define MCFDEBUG_CSR_SSM        0x00000010      /* Single step mode             */
+
+/* Constants for the BDM address attribute register */
+#define MCFDEBUG_BAAR_RESET     0x00000005
+/* Fields not yet implemented */
+
+
+/* This routine wrappers up the wdebug asm instruction so that the register
+ * and value can be relatively easily specified.  The biggest hassle here is
+ * that the debug module instructions (2 longs) must be long word aligned and
+ * some pointer fiddling is performed to ensure this.
+ */
+static inline void wdebug(int reg, unsigned long data) {
+        unsigned short dbg_spc[6];
+        unsigned short *dbg;
+
+        // Force alignment to long word boundary
+        dbg = (unsigned short *)((((unsigned long)dbg_spc) + 3) & 0xfffffffc);
+
+        // Build up the debug instruction
+        dbg[0] = 0x2c80 | (reg & 0xf);
+        dbg[1] = (data >> 16) & 0xffff;
+        dbg[2] = data & 0xffff;
+        dbg[3] = 0;
+
+        // Perform the wdebug instruction
+#if 0
+        // This strain is for gas which doesn't have the wdebug instructions defined
+        asm(    "move.l %0, %%a0\n\t"
+                ".word  0xfbd0\n\t"
+                ".word  0x0003\n\t"
+            :: "g" (dbg) : "a0");
+#else
+        // And this is for when it does
+        asm(    "wdebug (%0)" :: "a" (dbg));
+#endif
+}
+
+#endif
diff --git a/arch/m68k/include/asm/md.h b/arch/m68k/include/asm/md.h
new file mode 100644
index 000000000000..d2f78f226f3d
--- /dev/null
+++ b/arch/m68k/include/asm/md.h
@@ -0,0 +1,13 @@
+/*
+ * md.h: High speed xor_block operation for RAID4/5
+ *
+ */
+
+#ifndef __ASM_MD_H
+#define __ASM_MD_H
+
+/* #define HAVE_ARCH_XORBLOCK */
+
+#define MD_XORBLOCK_ALIGNMENT   sizeof(long)
+
+#endif /* __ASM_MD_H */
diff --git a/arch/m68k/include/asm/mman.h b/arch/m68k/include/asm/mman.h
new file mode 100644
index 000000000000..1626d37f4898
--- /dev/null
+++ b/arch/m68k/include/asm/mman.h
@@ -0,0 +1,17 @@
+#ifndef __M68K_MMAN_H__
+#define __M68K_MMAN_H__
+
+#include <asm-generic/mman.h>
+
+#define MAP_GROWSDOWN   0x0100          /* stack-like segment */
+#define MAP_DENYWRITE   0x0800          /* ETXTBSY */
+#define MAP_EXECUTABLE  0x1000          /* mark it as an executable */
+#define MAP_LOCKED      0x2000          /* pages are locked */
+#define MAP_NORESERVE   0x4000          /* don't check for reservations */
+#define MAP_POPULATE    0x8000          /* populate (prefault) pagetables */
+#define MAP_NONBLOCK    0x10000         /* do not block on IO */
+
+#define MCL_CURRENT     1               /* lock all current mappings */
+#define MCL_FUTURE      2               /* lock all future mappings */
+
+#endif /* __M68K_MMAN_H__ */
diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h
new file mode 100644
index 000000000000..a81d3946675f
--- /dev/null
+++ b/arch/m68k/include/asm/mmu.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_no.h"
+#else
+#include "mmu_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h
new file mode 100644
index 000000000000..b440928fc6c7
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_context.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "mmu_context_no.h"
+#else
+#include "mmu_context_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/mmu_context_mm.h b/arch/m68k/include/asm/mmu_context_mm.h
new file mode 100644
index 000000000000..894dacbcee14
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_context_mm.h
@@ -0,0 +1,154 @@
+#ifndef __M68K_MMU_CONTEXT_H
+#define __M68K_MMU_CONTEXT_H
+
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+#ifndef CONFIG_SUN3
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+
+static inline int init_new_context(struct task_struct *tsk,
+                                   struct mm_struct *mm)
+{
+        mm->context = virt_to_phys(mm->pgd);
+        return 0;
+}
+
+#define destroy_context(mm)             do { } while(0)
+
+static inline void switch_mm_0230(struct mm_struct *mm)
+{
+        unsigned long crp[2] = {
+                0x80000000 | _PAGE_TABLE, mm->context
+        };
+        unsigned long tmp;
+
+        asm volatile (".chip 68030");
+
+        /* flush MC68030/MC68020 caches (they are virtually addressed) */
+        asm volatile (
+                "movec %%cacr,%0;"
+                "orw %1,%0; "
+                "movec %0,%%cacr"
+                : "=d" (tmp) : "di" (FLUSH_I_AND_D));
+
+        /* Switch the root pointer. For a 030-only kernel,
+         * avoid flushing the whole ATC, we only need to
+         * flush the user entries. The 68851 does this by
+         * itself. Avoid a runtime check here.
+         */
+        asm volatile (
+#ifdef CPU_M68030_ONLY
+                "pmovefd %0,%%crp; "
+                "pflush #0,#4"
+#else
+                "pmove %0,%%crp"
+#endif
+                : : "m" (crp[0]));
+
+        asm volatile (".chip 68k");
+}
+
+static inline void switch_mm_0460(struct mm_struct *mm)
+{
+        asm volatile (".chip 68040");
+
+        /* flush address translation cache (user entries) */
+        asm volatile ("pflushan");
+
+        /* switch the root pointer */
+        asm volatile ("movec %0,%%urp" : : "r" (mm->context));
+
+        if (CPU_IS_060) {
+                unsigned long tmp;
+
+                /* clear user entries in the branch cache */
+                asm volatile (
+                        "movec %%cacr,%0; "
+                        "orl %1,%0; "
+                        "movec %0,%%cacr"
+                        : "=d" (tmp): "di" (0x00200000));
+        }
+
+        asm volatile (".chip 68k");
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+        if (prev != next) {
+                if (CPU_IS_020_OR_030)
+                        switch_mm_0230(next);
+                else
+                        switch_mm_0460(next);
+        }
+}
+
+#define deactivate_mm(tsk,mm)   do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+                               struct mm_struct *next_mm)
+{
+        next_mm->context = virt_to_phys(next_mm->pgd);
+
+        if (CPU_IS_020_OR_030)
+                switch_mm_0230(next_mm);
+        else
+                switch_mm_0460(next_mm);
+}
+
+#else  /* CONFIG_SUN3 */
+#include <asm/sun3mmu.h>
+#include <linux/sched.h>
+
+extern unsigned long get_free_context(struct mm_struct *mm);
+extern void clear_context(unsigned long context);
+
+/* set the context for a new task to unmapped */
+static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+        mm->context = SUN3_INVALID_CONTEXT;
+        return 0;
+}
+
+/* find the context given to this process, and if it hasn't already
+   got one, go get one for it. */
+static inline void get_mmu_context(struct mm_struct *mm)
+{
+        if(mm->context == SUN3_INVALID_CONTEXT)
+                mm->context = get_free_context(mm);
+}
+
+/* flush context if allocated... */
+static inline void destroy_context(struct mm_struct *mm)
+{
+        if(mm->context != SUN3_INVALID_CONTEXT)
+                clear_context(mm->context);
+}
+
+static inline void activate_context(struct mm_struct *mm)
+{
+        get_mmu_context(mm);
+        sun3_put_context(mm->context);
+}
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+        activate_context(tsk->mm);
+}
+
+#define deactivate_mm(tsk,mm)   do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+                               struct mm_struct *next_mm)
+{
+        activate_context(next_mm);
+}
+
+#endif
+#endif
diff --git a/arch/m68k/include/asm/mmu_context_no.h b/arch/m68k/include/asm/mmu_context_no.h
new file mode 100644
index 000000000000..9ccee4278c97
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_context_no.h
@@ -0,0 +1,33 @@
+#ifndef __M68KNOMMU_MMU_CONTEXT_H
+#define __M68KNOMMU_MMU_CONTEXT_H
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgalloc.h>
+#include <asm-generic/mm_hooks.h>
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+        // mm->context = virt_to_phys(mm->pgd);
+        return(0);
+}
+
+#define destroy_context(mm)             do { } while(0)
+
+static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk)
+{
+}
+
+#define deactivate_mm(tsk,mm)   do { } while (0)
+
+static inline void activate_mm(struct mm_struct *prev_mm,
+                               struct mm_struct *next_mm)
+{
+}
+
+#endif
diff --git a/arch/m68k/include/asm/mmu_mm.h b/arch/m68k/include/asm/mmu_mm.h
new file mode 100644
index 000000000000..ccd36d26615a
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_mm.h
@@ -0,0 +1,7 @@
+#ifndef __MMU_H
+#define __MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif
diff --git a/arch/m68k/include/asm/mmu_no.h b/arch/m68k/include/asm/mmu_no.h
new file mode 100644
index 000000000000..e2da1e6f09fe
--- /dev/null
+++ b/arch/m68k/include/asm/mmu_no.h
@@ -0,0 +1,10 @@
+#ifndef __M68KNOMMU_MMU_H
+#define __M68KNOMMU_MMU_H
+
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+typedef struct {
+        unsigned long           end_brk;
+} mm_context_t;
+
+#endif /* __M68KNOMMU_MMU_H */
diff --git a/arch/m68k/include/asm/mmzone.h b/arch/m68k/include/asm/mmzone.h
new file mode 100644
index 000000000000..e1f1ec7b7006
--- /dev/null
+++ b/arch/m68k/include/asm/mmzone.h
@@ -0,0 +1,9 @@
+#ifndef _ASM_M68K_MMZONE_H_
+#define _ASM_M68K_MMZONE_H_
+
+extern pg_data_t pg_data_map[];
+
+#define NODE_DATA(nid)          (&pg_data_map[nid])
+#define NODE_MEM_MAP(nid)       (NODE_DATA(nid)->node_mem_map)
+
+#endif /* _ASM_M68K_MMZONE_H_ */
diff --git a/arch/m68k/include/asm/module.h b/arch/m68k/include/asm/module.h
new file mode 100644
index 000000000000..79b59d137dd0
--- /dev/null
+++ b/arch/m68k/include/asm/module.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "module_no.h"
+#else
+#include "module_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/module_mm.h b/arch/m68k/include/asm/module_mm.h
new file mode 100644
index 000000000000..382d20a6fc18
--- /dev/null
+++ b/arch/m68k/include/asm/module_mm.h
@@ -0,0 +1,39 @@
+#ifndef _ASM_M68K_MODULE_H
+#define _ASM_M68K_MODULE_H
+
+struct mod_arch_specific {
+        struct m68k_fixup_info *fixup_start, *fixup_end;
+};
+
+#define MODULE_ARCH_INIT {                              \
+        .fixup_start            = __start_fixup,        \
+        .fixup_end              = __stop_fixup,         \
+}
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+
+enum m68k_fixup_type {
+        m68k_fixup_memoffset,
+        m68k_fixup_vnode_shift,
+};
+
+struct m68k_fixup_info {
+        enum m68k_fixup_type type;
+        void *addr;
+};
+
+#define m68k_fixup(type, addr)                  \
+        "       .section \".m68k_fixup\",\"aw\"\n"      \
+        "       .long " #type "," #addr "\n"    \
+        "       .previous\n"
+
+extern struct m68k_fixup_info __start_fixup[], __stop_fixup[];
+
+struct module;
+extern void module_fixup(struct module *mod, struct m68k_fixup_info *start,
+                         struct m68k_fixup_info *end);
+
+#endif /* _ASM_M68K_MODULE_H */
diff --git a/arch/m68k/include/asm/module_no.h b/arch/m68k/include/asm/module_no.h
new file mode 100644
index 000000000000..2e45ab50b232
--- /dev/null
+++ b/arch/m68k/include/asm/module_no.h
@@ -0,0 +1,11 @@
+#ifndef ASM_M68KNOMMU_MODULE_H
+#define ASM_M68KNOMMU_MODULE_H
+
+struct mod_arch_specific {
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+#endif /* ASM_M68KNOMMU_MODULE_H */
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
new file mode 100644
index 000000000000..d08bf6261df8
--- /dev/null
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -0,0 +1,109 @@
+#ifndef _MOTOROLA_PGALLOC_H
+#define _MOTOROLA_PGALLOC_H
+
+#include <asm/tlb.h>
+#include <asm/tlbflush.h>
+
+extern pmd_t *get_pointer_table(void);
+extern int free_pointer_table(pmd_t *);
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long address)
+{
+        pte_t *pte;
+
+        pte = (pte_t *)__get_free_page(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO);
+        if (pte) {
+                __flush_page_to_ram(pte);
+                flush_tlb_kernel_page(pte);
+                nocache_page(pte);
+        }
+
+        return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+        cache_page(pte);
+        free_page((unsigned long) pte);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+        struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO, 0);
+        pte_t *pte;
+
+        if(!page)
+                return NULL;
+
+        pte = kmap(page);
+        if (pte) {
+                __flush_page_to_ram(pte);
+                flush_tlb_kernel_page(pte);
+                nocache_page(pte);
+        }
+        kunmap(pte);
+        pgtable_page_ctor(page);
+        return page;
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t page)
+{
+        pgtable_page_dtor(page);
+        cache_page(kmap(page));
+        kunmap(page);
+        __free_page(page);
+}
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+{
+        pgtable_page_dtor(page);
+        cache_page(kmap(page));
+        kunmap(page);
+        __free_page(page);
+}
+
+
+static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
+{
+        return get_pointer_table();
+}
+
+static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
+{
+        return free_pointer_table(pmd);
+}
+
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+{
+        return free_pointer_table(pmd);
+}
+
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+        pmd_free(mm, (pmd_t *)pgd);
+}
+
+static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+        return (pgd_t *)get_pointer_table();
+}
+
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+        pmd_set(pmd, pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
+{
+        pmd_set(pmd, page_address(page));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+        pgd_set(pgd, pmd);
+}
+
+#endif /* _MOTOROLA_PGALLOC_H */
diff --git a/arch/m68k/include/asm/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h
new file mode 100644
index 000000000000..8e9a8a754dde
--- /dev/null
+++ b/arch/m68k/include/asm/motorola_pgtable.h
@@ -0,0 +1,291 @@
+#ifndef _MOTOROLA_PGTABLE_H
+#define _MOTOROLA_PGTABLE_H
+
+
+/*
+ * Definitions for MMU descriptors
+ */
+#define _PAGE_PRESENT   0x001
+#define _PAGE_SHORT     0x002
+#define _PAGE_RONLY     0x004
+#define _PAGE_ACCESSED  0x008
+#define _PAGE_DIRTY     0x010
+#define _PAGE_SUPER     0x080   /* 68040 supervisor only */
+#define _PAGE_GLOBAL040 0x400   /* 68040 global bit, used for kva descs */
+#define _PAGE_NOCACHE030 0x040  /* 68030 no-cache mode */
+#define _PAGE_NOCACHE   0x060   /* 68040 cache mode, non-serialized */
+#define _PAGE_NOCACHE_S 0x040   /* 68040 no-cache mode, serialized */
+#define _PAGE_CACHE040  0x020   /* 68040 cache mode, cachable, copyback */
+#define _PAGE_CACHE040W 0x000   /* 68040 cache mode, cachable, write-through */
+
+#define _DESCTYPE_MASK  0x003
+
+#define _CACHEMASK040   (~0x060)
+#define _TABLE_MASK     (0xfffffe00)
+
+#define _PAGE_TABLE     (_PAGE_SHORT)
+#define _PAGE_CHG_MASK  (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_NOCACHE)
+
+#define _PAGE_PROTNONE  0x004
+#define _PAGE_FILE      0x008   /* pagecache or swap? */
+
+#ifndef __ASSEMBLY__
+
+/* This is the cache mode to be used for pages containing page descriptors for
+ * processors >= '040. It is in pte_mknocache(), and the variable is defined
+ * and initialized in head.S */
+extern int m68k_pgtable_cachemode;
+
+/* This is the cache mode for normal pages, for supervisor access on
+ * processors >= '040. It is used in pte_mkcache(), and the variable is
+ * defined and initialized in head.S */
+
+#if defined(CPU_M68060_ONLY) && defined(CONFIG_060_WRITETHROUGH)
+#define m68k_supervisor_cachemode _PAGE_CACHE040W
+#elif defined(CPU_M68040_OR_M68060_ONLY)
+#define m68k_supervisor_cachemode _PAGE_CACHE040
+#elif defined(CPU_M68020_OR_M68030_ONLY)
+#define m68k_supervisor_cachemode 0
+#else
+extern int m68k_supervisor_cachemode;
+#endif
+
+#if defined(CPU_M68040_OR_M68060_ONLY)
+#define mm_cachebits _PAGE_CACHE040
+#elif defined(CPU_M68020_OR_M68030_ONLY)
+#define mm_cachebits 0
+#else
+extern unsigned long mm_cachebits;
+#endif
+
+#define PAGE_NONE       __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_SHARED     __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_COPY       __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_READONLY   __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED | mm_cachebits)
+#define PAGE_KERNEL     __pgprot(_PAGE_PRESENT | _PAGE_DIRTY | _PAGE_ACCESSED | mm_cachebits)
+
+/* Alternate definitions that are compile time constants, for
+   initializing protection_map.  The cachebits are fixed later.  */
+#define PAGE_NONE_C     __pgprot(_PAGE_PROTNONE | _PAGE_ACCESSED)
+#define PAGE_SHARED_C   __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
+#define PAGE_COPY_C     __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
+#define PAGE_READONLY_C __pgprot(_PAGE_PRESENT | _PAGE_RONLY | _PAGE_ACCESSED)
+
+/*
+ * The m68k can't do page protection for execute, and considers that the same are read.
+ * Also, write permissions imply read permissions. This is the closest we can get..
+ */
+#define __P000  PAGE_NONE_C
+#define __P001  PAGE_READONLY_C
+#define __P010  PAGE_COPY_C
+#define __P011  PAGE_COPY_C
+#define __P100  PAGE_READONLY_C
+#define __P101  PAGE_READONLY_C
+#define __P110  PAGE_COPY_C
+#define __P111  PAGE_COPY_C
+
+#define __S000  PAGE_NONE_C
+#define __S001  PAGE_READONLY_C
+#define __S010  PAGE_SHARED_C
+#define __S011  PAGE_SHARED_C
+#define __S100  PAGE_READONLY_C
+#define __S101  PAGE_READONLY_C
+#define __S110  PAGE_SHARED_C
+#define __S111  PAGE_SHARED_C
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
+        return pte;
+}
+
+static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
+{
+        unsigned long ptbl = virt_to_phys(ptep) | _PAGE_TABLE | _PAGE_ACCESSED;
+        unsigned long *ptr = pmdp->pmd;
+        short i = 16;
+        while (--i >= 0) {
+                *ptr++ = ptbl;
+                ptbl += (sizeof(pte_t)*PTRS_PER_PTE/16);
+        }
+}
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+        pgd_val(*pgdp) = _PAGE_TABLE | _PAGE_ACCESSED | __pa(pmdp);
+}
+
+#define __pte_page(pte) ((unsigned long)__va(pte_val(pte) & PAGE_MASK))
+#define __pmd_page(pmd) ((unsigned long)__va(pmd_val(pmd) & _TABLE_MASK))
+#define __pgd_page(pgd) ((unsigned long)__va(pgd_val(pgd) & _TABLE_MASK))
+
+
+#define pte_none(pte)           (!pte_val(pte))
+#define pte_present(pte)        (pte_val(pte) & (_PAGE_PRESENT | _PAGE_PROTNONE))
+#define pte_clear(mm,addr,ptep)         ({ pte_val(*(ptep)) = 0; })
+
+#define pte_page(pte)           virt_to_page(__va(pte_val(pte)))
+#define pte_pfn(pte)            (pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)      __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+
+#define pmd_none(pmd)           (!pmd_val(pmd))
+#define pmd_bad(pmd)            ((pmd_val(pmd) & _DESCTYPE_MASK) != _PAGE_TABLE)
+#define pmd_present(pmd)        (pmd_val(pmd) & _PAGE_TABLE)
+#define pmd_clear(pmdp) ({                      \
+        unsigned long *__ptr = pmdp->pmd;       \
+        short __i = 16;                         \
+        while (--__i >= 0)                      \
+                *__ptr++ = 0;                   \
+})
+#define pmd_page(pmd)           virt_to_page(__va(pmd_val(pmd)))
+
+
+#define pgd_none(pgd)           (!pgd_val(pgd))
+#define pgd_bad(pgd)            ((pgd_val(pgd) & _DESCTYPE_MASK) != _PAGE_TABLE)
+#define pgd_present(pgd)        (pgd_val(pgd) & _PAGE_TABLE)
+#define pgd_clear(pgdp)         ({ pgd_val(*pgdp) = 0; })
+#define pgd_page(pgd)           (mem_map + ((unsigned long)(__va(pgd_val(pgd)) - PAGE_OFFSET) >> PAGE_SHIFT))
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+        printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline int pte_write(pte_t pte)          { return !(pte_val(pte) & _PAGE_RONLY); }
+static inline int pte_dirty(pte_t pte)          { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte)          { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)           { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte)        { return 0; }
+
+static inline pte_t pte_wrprotect(pte_t pte)    { pte_val(pte) |= _PAGE_RONLY; return pte; }
+static inline pte_t pte_mkclean(pte_t pte)      { pte_val(pte) &= ~_PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkold(pte_t pte)        { pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)      { pte_val(pte) &= ~_PAGE_RONLY; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)      { pte_val(pte) |= _PAGE_DIRTY; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)      { pte_val(pte) |= _PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mknocache(pte_t pte)
+{
+        pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_pgtable_cachemode;
+        return pte;
+}
+static inline pte_t pte_mkcache(pte_t pte)
+{
+        pte_val(pte) = (pte_val(pte) & _CACHEMASK040) | m68k_supervisor_cachemode;
+        return pte;
+}
+static inline pte_t pte_mkspecial(pte_t pte)    { return pte; }
+
+#define PAGE_DIR_OFFSET(tsk,address) pgd_offset((tsk),(address))
+
+#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
+
+/* to find an entry in a page-table-directory */
+static inline pgd_t *pgd_offset(const struct mm_struct *mm,
+                                unsigned long address)
+{
+        return mm->pgd + pgd_index(address);
+}
+
+#define swapper_pg_dir kernel_pg_dir
+extern pgd_t kernel_pg_dir[128];
+
+static inline pgd_t *pgd_offset_k(unsigned long address)
+{
+        return kernel_pg_dir + (address >> PGDIR_SHIFT);
+}
+
+
+/* Find an entry in the second-level page table.. */
+static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
+{
+        return (pmd_t *)__pgd_page(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PMD-1));
+}
+
+/* Find an entry in the third-level page table.. */
+static inline pte_t *pte_offset_kernel(pmd_t *pmdp, unsigned long address)
+{
+        return (pte_t *)__pmd_page(*pmdp) + ((address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1));
+}
+
+#define pte_offset_map(pmdp,address) ((pte_t *)__pmd_page(*pmdp) + (((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+#define pte_offset_map_nested(pmdp, address) pte_offset_map(pmdp, address)
+#define pte_unmap(pte)          ((void)0)
+#define pte_unmap_nested(pte)   ((void)0)
+
+/*
+ * Allocate and free page tables. The xxx_kernel() versions are
+ * used to allocate a kernel page table - this turns on ASN bits
+ * if any.
+ */
+
+/* Prior to calling these routines, the page should have been flushed
+ * from both the cache and ATC, or the CPU might not notice that the
+ * cache setting for the page has been changed. -jskov
+ */
+static inline void nocache_page(void *vaddr)
+{
+        unsigned long addr = (unsigned long)vaddr;
+
+        if (CPU_IS_040_OR_060) {
+                pgd_t *dir;
+                pmd_t *pmdp;
+                pte_t *ptep;
+
+                dir = pgd_offset_k(addr);
+                pmdp = pmd_offset(dir, addr);
+                ptep = pte_offset_kernel(pmdp, addr);
+                *ptep = pte_mknocache(*ptep);
+        }
+}
+
+static inline void cache_page(void *vaddr)
+{
+        unsigned long addr = (unsigned long)vaddr;
+
+        if (CPU_IS_040_OR_060) {
+                pgd_t *dir;
+                pmd_t *pmdp;
+                pte_t *ptep;
+
+                dir = pgd_offset_k(addr);
+                pmdp = pmd_offset(dir, addr);
+                ptep = pte_offset_kernel(pmdp, addr);
+                *ptep = pte_mkcache(*ptep);
+        }
+}
+
+#define PTE_FILE_MAX_BITS       28
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+        return pte.pte >> 4;
+}
+
+static inline pte_t pgoff_to_pte(unsigned off)
+{
+        pte_t pte = { (off << 4) + _PAGE_FILE };
+        return pte;
+}
+
+/* Encode and de-code a swap entry (must be !pte_none(e) && !pte_present(e)) */
+#define __swp_type(x)           (((x).val >> 4) & 0xff)
+#define __swp_offset(x)         ((x).val >> 12)
+#define __swp_entry(type, offset) ((swp_entry_t) { ((type) << 4) | ((offset) << 12) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)   ((pte_t) { (x).val })
+
+#endif  /* !__ASSEMBLY__ */
+#endif /* _MOTOROLA_PGTABLE_H */
diff --git a/arch/m68k/include/asm/movs.h b/arch/m68k/include/asm/movs.h
new file mode 100644
index 000000000000..67dbea36960f
--- /dev/null
+++ b/arch/m68k/include/asm/movs.h
@@ -0,0 +1,55 @@
+#ifndef  __MOVS_H__
+#define __MOVS_H__
+
+/*
+** movs.h
+**
+** Inline assembly macros to generate movs & related instructions
+*/
+
+/* Set DFC register value */
+
+#define SET_DFC(x) \
+        __asm__ __volatile__ (" movec %0,%/dfc" : : "d" (x));
+
+/* Get DFC register value */
+
+#define GET_DFC(x) \
+        __asm__ __volatile__ (" movec %/dfc, %0" : "=d" (x) : );
+
+/* Set SFC register value */
+
+#define SET_SFC(x) \
+        __asm__ __volatile__ (" movec %0,%/sfc" : : "d" (x));
+
+/* Get SFC register value */
+
+#define GET_SFC(x) \
+        __asm__ __volatile__ (" movec %/sfc, %0" : "=d" (x) : );
+
+#define SET_VBR(x) \
+        __asm__ __volatile__ (" movec %0,%/vbr" : : "r" (x));
+
+#define GET_VBR(x) \
+        __asm__ __volatile__ (" movec %/vbr, %0" : "=g" (x) : );
+
+/* Set a byte using the "movs" instruction */
+
+#define SET_CONTROL_BYTE(addr,value) \
+        __asm__ __volatile__ (" movsb %0, %1@" : : "d" (value), "a" (addr));
+
+/* Get a byte using the "movs" instruction */
+
+#define GET_CONTROL_BYTE(addr,value) \
+        __asm__ __volatile__ (" movsb %1@, %0" : "=d" (value) : "a" (addr));
+
+/* Set a (long)word using the "movs" instruction */
+
+#define SET_CONTROL_WORD(addr,value) \
+        __asm__ __volatile__ (" movsl %0, %1@" : : "d" (value), "a" (addr));
+
+/* Get a (long)word using the "movs" instruction */
+
+#define GET_CONTROL_WORD(addr,value) \
+        __asm__ __volatile__ (" movsl %1@, %0" : "=d" (value) : "a" (addr));
+#endif
diff --git a/arch/m68k/include/asm/msgbuf.h b/arch/m68k/include/asm/msgbuf.h
new file mode 100644
index 000000000000..243cb798de8f
--- /dev/null
+++ b/arch/m68k/include/asm/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef _M68K_MSGBUF_H
+#define _M68K_MSGBUF_H
+
+/*
+ * The msqid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+        struct ipc64_perm msg_perm;
+        __kernel_time_t msg_stime;      /* last msgsnd time */
+        unsigned long   __unused1;
+        __kernel_time_t msg_rtime;      /* last msgrcv time */
+        unsigned long   __unused2;
+        __kernel_time_t msg_ctime;      /* last change time */
+        unsigned long   __unused3;
+        unsigned long  msg_cbytes;      /* current number of bytes on queue */
+        unsigned long  msg_qnum;        /* number of messages in queue */
+        unsigned long  msg_qbytes;      /* max number of bytes on queue */
+        __kernel_pid_t msg_lspid;       /* pid of last msgsnd */
+        __kernel_pid_t msg_lrpid;       /* last receive pid */
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+#endif /* _M68K_MSGBUF_H */
diff --git a/arch/m68k/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h
new file mode 100644
index 000000000000..458c1f7fbc18
--- /dev/null
+++ b/arch/m68k/include/asm/mutex.h
@@ -0,0 +1,9 @@
+/*
+ * Pull in the generic implementation for the mutex fastpath.
+ *
+ * TODO: implement optimized primitives instead, or leave the generic
+ * implementation in place, or pick the atomic_xchg() based generic
+ * implementation. (see asm-generic/mutex-xchg.h for details)
+ */
+
+#include <asm-generic/mutex-dec.h>
diff --git a/arch/m68k/include/asm/mvme147hw.h b/arch/m68k/include/asm/mvme147hw.h
new file mode 100644
index 000000000000..b81043108472
--- /dev/null
+++ b/arch/m68k/include/asm/mvme147hw.h
@@ -0,0 +1,113 @@
+#ifndef _MVME147HW_H_
+#define _MVME147HW_H_
+
+#include <asm/irq.h>
+
+typedef struct {
+        unsigned char
+                ctrl,
+                bcd_sec,
+                bcd_min,
+                bcd_hr,
+                bcd_dow,
+                bcd_dom,
+                bcd_mth,
+                bcd_year;
+} MK48T02;
+
+#define RTC_WRITE       0x80
+#define RTC_READ        0x40
+#define RTC_STOP        0x20
+
+#define m147_rtc ((MK48T02 * volatile)0xfffe07f8)
+
+
+struct pcc_regs {
+   volatile u_long      dma_tadr;
+   volatile u_long      dma_dadr;
+   volatile u_long      dma_bcr;
+   volatile u_long      dma_hr;
+   volatile u_short     t1_preload;
+   volatile u_short     t1_count;
+   volatile u_short     t2_preload;
+   volatile u_short     t2_count;
+   volatile u_char      t1_int_cntrl;
+   volatile u_char      t1_cntrl;
+   volatile u_char      t2_int_cntrl;
+   volatile u_char      t2_cntrl;
+   volatile u_char      ac_fail;
+   volatile u_char      watchdog;
+   volatile u_char      lpt_intr;
+   volatile u_char      lpt_cntrl;
+   volatile u_char      dma_intr;
+   volatile u_char      dma_cntrl;
+   volatile u_char      bus_error;
+   volatile u_char      dma_status;
+   volatile u_char      abort;
+   volatile u_char      ta_fnctl;
+   volatile u_char      serial_cntrl;
+   volatile u_char      general_cntrl;
+   volatile u_char      lan_cntrl;
+   volatile u_char      general_status;
+   volatile u_char      scsi_interrupt;
+   volatile u_char      slave;
+   volatile u_char      soft1_cntrl;
+   volatile u_char      int_base;
+   volatile u_char      soft2_cntrl;
+   volatile u_char      revision_level;
+   volatile u_char      lpt_data;
+   volatile u_char      lpt_status;
+   };
+
+#define m147_pcc ((struct pcc_regs * volatile)0xfffe1000)
+
+
+#define PCC_INT_ENAB            0x08
+
+#define PCC_TIMER_INT_CLR       0x80
+#define PCC_TIMER_PRELOAD       63936l
+
+#define PCC_LEVEL_ABORT         0x07
+#define PCC_LEVEL_SERIAL        0x04
+#define PCC_LEVEL_ETH           0x04
+#define PCC_LEVEL_TIMER1        0x04
+#define PCC_LEVEL_SCSI_PORT     0x04
+#define PCC_LEVEL_SCSI_DMA      0x04
+
+#define PCC_IRQ_AC_FAIL         (IRQ_USER+0)
+#define PCC_IRQ_BERR            (IRQ_USER+1)
+#define PCC_IRQ_ABORT           (IRQ_USER+2)
+/* #define PCC_IRQ_SERIAL       (IRQ_USER+3) */
+#define PCC_IRQ_PRINTER         (IRQ_USER+7)
+#define PCC_IRQ_TIMER1          (IRQ_USER+8)
+#define PCC_IRQ_TIMER2          (IRQ_USER+9)
+#define PCC_IRQ_SOFTWARE1       (IRQ_USER+10)
+#define PCC_IRQ_SOFTWARE2       (IRQ_USER+11)
+
+
+#define M147_SCC_A_ADDR         0xfffe3002
+#define M147_SCC_B_ADDR         0xfffe3000
+#define M147_SCC_PCLK           5000000
+
+#define MVME147_IRQ_SCSI_PORT   (IRQ_USER+0x45)
+#define MVME147_IRQ_SCSI_DMA    (IRQ_USER+0x46)
+
+/* SCC interrupts, for MVME147 */
+
+#define MVME147_IRQ_TYPE_PRIO   0
+#define MVME147_IRQ_SCC_BASE            (IRQ_USER+32)
+#define MVME147_IRQ_SCCB_TX             (IRQ_USER+32)
+#define MVME147_IRQ_SCCB_STAT           (IRQ_USER+34)
+#define MVME147_IRQ_SCCB_RX             (IRQ_USER+36)
+#define MVME147_IRQ_SCCB_SPCOND         (IRQ_USER+38)
+#define MVME147_IRQ_SCCA_TX             (IRQ_USER+40)
+#define MVME147_IRQ_SCCA_STAT           (IRQ_USER+42)
+#define MVME147_IRQ_SCCA_RX             (IRQ_USER+44)
+#define MVME147_IRQ_SCCA_SPCOND         (IRQ_USER+46)
+
+#define MVME147_LANCE_BASE      0xfffe1800
+#define MVME147_LANCE_IRQ       (IRQ_USER+4)
+
+#define ETHERNET_ADDRESS 0xfffe0778
+
+#endif
diff --git a/arch/m68k/include/asm/mvme16xhw.h b/arch/m68k/include/asm/mvme16xhw.h
new file mode 100644
index 000000000000..6117f56653d2
--- /dev/null
+++ b/arch/m68k/include/asm/mvme16xhw.h
@@ -0,0 +1,111 @@
+#ifndef _M68K_MVME16xHW_H_
+#define _M68K_MVME16xHW_H_
+
+#include <asm/irq.h>
+
+/* Board ID data structure - pointer to this retrieved from Bug by head.S */
+
+/* Note, bytes 12 and 13 are board no in BCD (0162,0166,0167,0177,etc) */
+
+extern long mvme_bdid_ptr;
+
+typedef struct {
+        char    bdid[4];
+        u_char  rev, mth, day, yr;
+        u_short size, reserved;
+        u_short brdno;
+        char brdsuffix[2];
+        u_long  options;
+        u_short clun, dlun, ctype, dnum;
+        u_long  option2;
+} t_bdid, *p_bdid;
+
+
+typedef struct {
+        u_char  ack_icr,
+                flt_icr,
+                sel_icr,
+                pe_icr,
+                bsy_icr,
+                spare1,
+                isr,
+                cr,
+                spare2,
+                spare3,
+                spare4,
+                data;
+} MVMElp, *MVMElpPtr;
+
+#define MVME_LPR_BASE   0xfff42030
+
+#define mvmelp   ((*(volatile MVMElpPtr)(MVME_LPR_BASE)))
+
+typedef struct {
+        unsigned char
+                ctrl,
+                bcd_sec,
+                bcd_min,
+                bcd_hr,
+                bcd_dow,
+                bcd_dom,
+                bcd_mth,
+                bcd_year;
+} MK48T08_t, *MK48T08ptr_t;
+
+#define RTC_WRITE       0x80
+#define RTC_READ        0x40
+#define RTC_STOP        0x20
+
+#define MVME_RTC_BASE   0xfffc1ff8
+
+#define MVME_I596_BASE  0xfff46000
+
+#define MVME_SCC_A_ADDR 0xfff45005
+#define MVME_SCC_B_ADDR 0xfff45001
+#define MVME_SCC_PCLK   10000000
+
+#define MVME162_IRQ_TYPE_PRIO   0
+
+#define MVME167_IRQ_PRN         (IRQ_USER+20)
+#define MVME16x_IRQ_I596        (IRQ_USER+23)
+#define MVME16x_IRQ_SCSI        (IRQ_USER+21)
+#define MVME16x_IRQ_FLY         (IRQ_USER+63)
+#define MVME167_IRQ_SER_ERR     (IRQ_USER+28)
+#define MVME167_IRQ_SER_MODEM   (IRQ_USER+29)
+#define MVME167_IRQ_SER_TX      (IRQ_USER+30)
+#define MVME167_IRQ_SER_RX      (IRQ_USER+31)
+#define MVME16x_IRQ_TIMER       (IRQ_USER+25)
+#define MVME167_IRQ_ABORT       (IRQ_USER+46)
+#define MVME162_IRQ_ABORT       (IRQ_USER+30)
+
+/* SCC interrupts, for MVME162 */
+#define MVME162_IRQ_SCC_BASE            (IRQ_USER+0)
+#define MVME162_IRQ_SCCB_TX             (IRQ_USER+0)
+#define MVME162_IRQ_SCCB_STAT           (IRQ_USER+2)
+#define MVME162_IRQ_SCCB_RX             (IRQ_USER+4)
+#define MVME162_IRQ_SCCB_SPCOND         (IRQ_USER+6)
+#define MVME162_IRQ_SCCA_TX             (IRQ_USER+8)
+#define MVME162_IRQ_SCCA_STAT           (IRQ_USER+10)
+#define MVME162_IRQ_SCCA_RX             (IRQ_USER+12)
+#define MVME162_IRQ_SCCA_SPCOND         (IRQ_USER+14)
+
+/* MVME162 version register */
+
+#define MVME162_VERSION_REG     0xfff4202e
+
+extern unsigned short mvme16x_config;
+
+/* Lower 8 bits must match the revision register in the MC2 chip */
+
+#define MVME16x_CONFIG_SPEED_32         0x0001
+#define MVME16x_CONFIG_NO_VMECHIP2      0x0002
+#define MVME16x_CONFIG_NO_SCSICHIP      0x0004
+#define MVME16x_CONFIG_NO_ETHERNET      0x0008
+#define MVME16x_CONFIG_GOT_FPU          0x0010
+
+#define MVME16x_CONFIG_GOT_LP           0x0100
+#define MVME16x_CONFIG_GOT_CD2401       0x0200
+#define MVME16x_CONFIG_GOT_SCCA         0x0400
+#define MVME16x_CONFIG_GOT_SCCB         0x0800
+
+#endif
diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h
new file mode 100644
index 000000000000..0299f6a2deeb
--- /dev/null
+++ b/arch/m68k/include/asm/nettel.h
@@ -0,0 +1,108 @@
+/****************************************************************************/
+
+/*
+ *      nettel.h -- Lineo (formerly Moreton Bay) NETtel support.
+ *
+ *      (C) Copyright 1999-2000, Moreton Bay (www.moretonbay.com)
+ *      (C) Copyright 2000-2001, Lineo Inc. (www.lineo.com) 
+ *      (C) Copyright 2001-2002, SnapGear Inc., (www.snapgear.com) 
+ */
+
+/****************************************************************************/
+#ifndef nettel_h
+#define nettel_h
+/****************************************************************************/
+
+
+/****************************************************************************/
+#ifdef CONFIG_NETtel
+/****************************************************************************/
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif
+
+/*---------------------------------------------------------------------------*/
+#if defined(CONFIG_M5307)
+/*
+ *      NETtel/5307 based hardware first. DTR/DCD lines are wired to
+ *      GPIO lines. Most of the LED's are driver through a latch
+ *      connected to CS2.
+ */
+#define MCFPP_DCD1      0x0001
+#define MCFPP_DCD0      0x0002
+#define MCFPP_DTR1      0x0004
+#define MCFPP_DTR0      0x0008
+
+#define NETtel_LEDADDR  0x30400000
+
+#ifndef __ASSEMBLY__
+
+extern volatile unsigned short ppdata;
+
+/*
+ *      These functions defined to give quasi generic access to the
+ *      PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+        volatile unsigned short *pp;
+        pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+        return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+        volatile unsigned short *pp;
+        pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
+        ppdata = (ppdata & ~mask) | bits;
+        *pp = ppdata;
+}
+#endif
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5206e)
+/*
+ *      NETtel/5206e based hardware has leds on latch on CS3.
+ *      No support modem for lines??
+ */
+#define NETtel_LEDADDR  0x50000000
+
+/*---------------------------------------------------------------------------*/
+#elif defined(CONFIG_M5272)
+/*
+ *      NETtel/5272 based hardware. DTR/DCD lines are wired to GPB lines.
+ */
+#define MCFPP_DCD0      0x0080
+#define MCFPP_DCD1      0x0000          /* Port 1 no DCD support */
+#define MCFPP_DTR0      0x0040
+#define MCFPP_DTR1      0x0000          /* Port 1 no DTR support */
+
+#ifndef __ASSEMBLY__
+/*
+ *      These functions defined to give quasi generic access to the
+ *      PPIO bits used for DTR/DCD.
+ */
+static __inline__ unsigned int mcf_getppdata(void)
+{
+        volatile unsigned short *pp;
+        pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+        return((unsigned int) *pp);
+}
+
+static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
+{
+        volatile unsigned short *pp;
+        pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
+        *pp = (*pp & ~mask) | bits;
+}
+#endif
+
+#endif
+/*---------------------------------------------------------------------------*/
+
+/****************************************************************************/
+#endif /* CONFIG_NETtel */
+/****************************************************************************/
+#endif  /* nettel_h */
diff --git a/arch/m68k/include/asm/nubus.h b/arch/m68k/include/asm/nubus.h
new file mode 100644
index 000000000000..d6be9976f1ae
--- /dev/null
+++ b/arch/m68k/include/asm/nubus.h
@@ -0,0 +1,46 @@
+#ifndef _ASM_M68K_NUBUS_H
+#define _ASM_M68K_NUBUS_H
+
+#include <asm/raw_io.h>
+
+#define nubus_readb raw_inb
+#define nubus_readw raw_inw
+#define nubus_readl raw_inl
+
+#define nubus_writeb raw_outb
+#define nubus_writew raw_outw
+#define nubus_writel raw_outl
+
+#define nubus_memset_io(a,b,c)          memset((void *)(a),(b),(c))
+#define nubus_memcpy_fromio(a,b,c)      memcpy((a),(void *)(b),(c))
+#define nubus_memcpy_toio(a,b,c)        memcpy((void *)(a),(b),(c))
+
+static inline void *nubus_remap_nocache_ser(unsigned long physaddr,
+                                            unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void *nubus_remap_nocache_nonser(unsigned long physaddr,
+                                               unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
+}
+
+static inline void *nbus_remap_writethrough(unsigned long physaddr,
+                                            unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+static inline void *nubus_remap_fullcache(unsigned long physaddr,
+                                          unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define nubus_unmap iounmap
+#define nubus_iounmap iounmap
+#define nubus_ioremap nubus_remap_nocache_ser
+
+#endif /* _ASM_NUBUS_H */
diff --git a/arch/m68k/include/asm/openprom.h b/arch/m68k/include/asm/openprom.h
new file mode 100644
index 000000000000..d33cdadf78e1
--- /dev/null
+++ b/arch/m68k/include/asm/openprom.h
@@ -0,0 +1,312 @@
+#ifndef __SPARC_OPENPROM_H
+#define __SPARC_OPENPROM_H
+
+/* openprom.h:  Prom structures and defines for access to the OPENBOOT
+ *              prom routines and data areas.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+
+/* Empirical constants... */
+#ifdef CONFIG_SUN3
+#define KADB_DEBUGGER_BEGVM     0x0fee0000    /* There is no kadb yet but...*/
+#define LINUX_OPPROM_BEGVM      0x0fef0000
+#define LINUX_OPPROM_ENDVM      0x0ff10000    /* I think this is right - tm */
+#else
+#define KADB_DEBUGGER_BEGVM     0xffc00000    /* Where kern debugger is in virt-mem */
+#define LINUX_OPPROM_BEGVM      0xffd00000
+#define LINUX_OPPROM_ENDVM      0xfff00000
+#define LINUX_OPPROM_MAGIC      0x10010407
+#endif
+
+#ifndef __ASSEMBLY__
+/* V0 prom device operations. */
+struct linux_dev_v0_funcs {
+        int (*v0_devopen)(char *device_str);
+        int (*v0_devclose)(int dev_desc);
+        int (*v0_rdblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+        int (*v0_wrblkdev)(int dev_desc, int num_blks, int blk_st, char *buf);
+        int (*v0_wrnetdev)(int dev_desc, int num_bytes, char *buf);
+        int (*v0_rdnetdev)(int dev_desc, int num_bytes, char *buf);
+        int (*v0_rdchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+        int (*v0_wrchardev)(int dev_desc, int num_bytes, int dummy, char *buf);
+        int (*v0_seekdev)(int dev_desc, long logical_offst, int from);
+};
+
+/* V2 and later prom device operations. */
+struct linux_dev_v2_funcs {
+        int (*v2_inst2pkg)(int d);      /* Convert ihandle to phandle */
+        char * (*v2_dumb_mem_alloc)(char *va, unsigned sz);
+        void (*v2_dumb_mem_free)(char *va, unsigned sz);
+
+        /* To map devices into virtual I/O space. */
+        char * (*v2_dumb_mmap)(char *virta, int which_io, unsigned paddr, unsigned sz);
+        void (*v2_dumb_munmap)(char *virta, unsigned size);
+
+        int (*v2_dev_open)(char *devpath);
+        void (*v2_dev_close)(int d);
+        int (*v2_dev_read)(int d, char *buf, int nbytes);
+        int (*v2_dev_write)(int d, char *buf, int nbytes);
+        int (*v2_dev_seek)(int d, int hi, int lo);
+
+        /* Never issued (multistage load support) */
+        void (*v2_wheee2)(void);
+        void (*v2_wheee3)(void);
+};
+
+struct linux_mlist_v0 {
+        struct linux_mlist_v0 *theres_more;
+        char *start_adr;
+        unsigned num_bytes;
+};
+
+struct linux_mem_v0 {
+        struct linux_mlist_v0 **v0_totphys;
+        struct linux_mlist_v0 **v0_prommap;
+        struct linux_mlist_v0 **v0_available; /* What we can use */
+};
+
+/* Arguments sent to the kernel from the boot prompt. */
+struct linux_arguments_v0 {
+        char *argv[8];
+        char args[100];
+        char boot_dev[2];
+        int boot_dev_ctrl;
+        int boot_dev_unit;
+        int dev_partition;
+        char *kernel_file_name;
+        void *aieee1;           /* XXX */
+};
+
+/* V2 and up boot things. */
+struct linux_bootargs_v2 {
+        char **bootpath;
+        char **bootargs;
+        int *fd_stdin;
+        int *fd_stdout;
+};
+
+#if defined(CONFIG_SUN3) || defined(CONFIG_SUN3X)
+struct linux_romvec {
+        char            *pv_initsp;
+        int             (*pv_startmon)(void);
+
+        int             *diagberr;
+
+        struct linux_arguments_v0 **pv_v0bootargs;
+        unsigned        *pv_sun3mem;
+
+        unsigned char   (*pv_getchar)(void);
+        int             (*pv_putchar)(int ch);
+        int             (*pv_nbgetchar)(void);
+        int             (*pv_nbputchar)(int ch);
+        unsigned char   *pv_echo;
+        unsigned char   *pv_insource;
+        unsigned char   *pv_outsink;
+
+        int             (*pv_getkey)(void);
+        int             (*pv_initgetkey)(void);
+        unsigned int    *pv_translation;
+        unsigned char   *pv_keybid;
+        int             *pv_screen_x;
+        int             *pv_screen_y;
+        struct keybuf   *pv_keybuf;
+
+        char            *pv_monid;
+
+        /*
+         * Frame buffer output and terminal emulation
+         */
+
+        int             (*pv_fbwritechar)(char);
+        int             *pv_fbaddr;
+        char            **pv_font;
+        int             (*pv_fbwritestr)(char);
+
+        void            (*pv_reboot)(char *bootstr);
+
+        /*
+         * Line input and parsing
+         */
+
+        unsigned char   *pv_linebuf;
+        unsigned char   **pv_lineptr;
+        int             *pv_linesize;
+        int             (*pv_getline)(void);
+        unsigned char   (*pv_getnextchar)(void);
+        unsigned char   (*pv_peeknextchar)(void);
+        int             *pv_fbthere;
+        int             (*pv_getnum)(void);
+
+        void            (*pv_printf)(const char *fmt, ...);
+        int             (*pv_printhex)(void);
+
+        unsigned char   *pv_leds;
+        int             (*pv_setleds)(void);
+
+        /*
+         * Non-maskable interrupt  (nmi) information
+         */
+
+        int             (*pv_nmiaddr)(void);
+        int             (*pv_abortentry)(void);
+        int             *pv_nmiclock;
+
+        int             *pv_fbtype;
+
+        /*
+         * Assorted other things
+         */
+
+        unsigned        pv_romvers;
+        struct globram  *pv_globram;
+        char            *pv_kbdzscc;
+
+        int             *pv_keyrinit;
+        unsigned char   *pv_keyrtick;
+        unsigned        *pv_memoryavail;
+        long            *pv_resetaddr;
+        long            *pv_resetmap;
+
+        void            (*pv_halt)(void);
+        unsigned char   *pv_memorybitmap;
+
+#ifdef CONFIG_SUN3
+        void            (*pv_setctxt)(int ctxt, char *va, int pmeg);
+        void            (*pv_vector_cmd)(void);
+        int             dummy1z;
+        int             dummy2z;
+        int             dummy3z;
+        int             dummy4z;
+#endif
+};
+#else
+/* The top level PROM vector. */
+struct linux_romvec {
+        /* Version numbers. */
+        unsigned int pv_magic_cookie;
+        unsigned int pv_romvers;
+        unsigned int pv_plugin_revision;
+        unsigned int pv_printrev;
+
+        /* Version 0 memory descriptors. */
+        struct linux_mem_v0 pv_v0mem;
+
+        /* Node operations. */
+        struct linux_nodeops *pv_nodeops;
+
+        char **pv_bootstr;
+        struct linux_dev_v0_funcs pv_v0devops;
+
+        char *pv_stdin;
+        char *pv_stdout;
+#define PROMDEV_KBD     0               /* input from keyboard */
+#define PROMDEV_SCREEN  0               /* output to screen */
+#define PROMDEV_TTYA    1               /* in/out to ttya */
+#define PROMDEV_TTYB    2               /* in/out to ttyb */
+
+        /* Blocking getchar/putchar.  NOT REENTRANT! (grr) */
+        int (*pv_getchar)(void);
+        void (*pv_putchar)(int ch);
+
+        /* Non-blocking variants. */
+        int (*pv_nbgetchar)(void);
+        int (*pv_nbputchar)(int ch);
+
+        void (*pv_putstr)(char *str, int len);
+
+        /* Miscellany. */
+        void (*pv_reboot)(char *bootstr);
+        void (*pv_printf)(__const__ char *fmt, ...);
+        void (*pv_abort)(void);
+        __volatile__ int *pv_ticks;
+        void (*pv_halt)(void);
+        void (**pv_synchook)(void);
+
+        /* Evaluate a forth string, not different proto for V0 and V2->up. */
+        union {
+                void (*v0_eval)(int len, char *str);
+                void (*v2_eval)(char *str);
+        } pv_fortheval;
+
+        struct linux_arguments_v0 **pv_v0bootargs;
+
+        /* Get ether address. */
+        unsigned int (*pv_enaddr)(int d, char *enaddr);
+
+        struct linux_bootargs_v2 pv_v2bootargs;
+        struct linux_dev_v2_funcs pv_v2devops;
+
+        int filler[15];
+
+        /* This one is sun4c/sun4 only. */
+        void (*pv_setctxt)(int ctxt, char *va, int pmeg);
+
+        /* Prom version 3 Multiprocessor routines. This stuff is crazy.
+         * No joke. Calling these when there is only one cpu probably
+         * crashes the machine, have to test this. :-)
+         */
+
+        /* v3_cpustart() will start the cpu 'whichcpu' in mmu-context
+         * 'thiscontext' executing at address 'prog_counter'
+         */
+        int (*v3_cpustart)(unsigned int whichcpu, int ctxtbl_ptr,
+                           int thiscontext, char *prog_counter);
+
+        /* v3_cpustop() will cause cpu 'whichcpu' to stop executing
+         * until a resume cpu call is made.
+         */
+        int (*v3_cpustop)(unsigned int whichcpu);
+
+        /* v3_cpuidle() will idle cpu 'whichcpu' until a stop or
+         * resume cpu call is made.
+         */
+        int (*v3_cpuidle)(unsigned int whichcpu);
+
+        /* v3_cpuresume() will resume processor 'whichcpu' executing
+         * starting with whatever 'pc' and 'npc' were left at the
+         * last 'idle' or 'stop' call.
+         */
+        int (*v3_cpuresume)(unsigned int whichcpu);
+};
+#endif
+
+/* Routines for traversing the prom device tree. */
+struct linux_nodeops {
+        int (*no_nextnode)(int node);
+        int (*no_child)(int node);
+        int (*no_proplen)(int node, char *name);
+        int (*no_getprop)(int node, char *name, char *val);
+        int (*no_setprop)(int node, char *name, char *val, int len);
+        char * (*no_nextprop)(int node, char *name);
+};
+
+/* More fun PROM structures for device probing. */
+#define PROMREG_MAX     16
+#define PROMVADDR_MAX   16
+#define PROMINTR_MAX    15
+
+struct linux_prom_registers {
+        int which_io;         /* is this in OBIO space? */
+        char *phys_addr;      /* The physical address of this register */
+        int reg_size;         /* How many bytes does this register take up? */
+};
+
+struct linux_prom_irqs {
+        int pri;    /* IRQ priority */
+        int vector; /* This is foobar, what does it do? */
+};
+
+/* Element of the "ranges" vector */
+struct linux_prom_ranges {
+        unsigned int ot_child_space;
+        unsigned int ot_child_base;             /* Bus feels this */
+        unsigned int ot_parent_space;
+        unsigned int ot_parent_base;            /* CPU looks from here */
+        unsigned int or_size;
+};
+
+#endif /* !(__ASSEMBLY__) */
+
+#endif /* !(__SPARC_OPENPROM_H) */
diff --git a/arch/m68k/include/asm/oplib.h b/arch/m68k/include/asm/oplib.h
new file mode 100644
index 000000000000..f082d03336bd
--- /dev/null
+++ b/arch/m68k/include/asm/oplib.h
@@ -0,0 +1,291 @@
+/*
+ * oplib.h:  Describes the interface and available routines in the
+ *           Linux Prom library.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef __SPARC_OPLIB_H
+#define __SPARC_OPLIB_H
+
+#include <asm/openprom.h>
+
+/* The master romvec pointer... */
+extern struct linux_romvec *romvec;
+
+/* Enumeration to describe the prom major version we have detected. */
+enum prom_major_version {
+        PROM_V0,      /* Original sun4c V0 prom */
+        PROM_V2,      /* sun4c and early sun4m V2 prom */
+        PROM_V3,      /* sun4m and later, up to sun4d/sun4e machines V3 */
+        PROM_P1275,   /* IEEE compliant ISA based Sun PROM, only sun4u */
+};
+
+extern enum prom_major_version prom_vers;
+/* Revision, and firmware revision. */
+extern unsigned int prom_rev, prom_prev;
+
+/* Root node of the prom device tree, this stays constant after
+ * initialization is complete.
+ */
+extern int prom_root_node;
+
+/* Pointer to prom structure containing the device tree traversal
+ * and usage utility functions.  Only prom-lib should use these,
+ * users use the interface defined by the library only!
+ */
+extern struct linux_nodeops *prom_nodeops;
+
+/* The functions... */
+
+/* You must call prom_init() before using any of the library services,
+ * preferably as early as possible.  Pass it the romvec pointer.
+ */
+extern void prom_init(struct linux_romvec *rom_ptr);
+
+/* Boot argument acquisition, returns the boot command line string. */
+extern char *prom_getbootargs(void);
+
+/* Device utilities. */
+
+/* Map and unmap devices in IO space at virtual addresses. Note that the
+ * virtual address you pass is a request and the prom may put your mappings
+ * somewhere else, so check your return value as that is where your new
+ * mappings really are!
+ *
+ * Another note, these are only available on V2 or higher proms!
+ */
+extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
+extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
+
+/* Device operations. */
+
+/* Open the device described by the passed string.  Note, that the format
+ * of the string is different on V0 vs. V2->higher proms.  The caller must
+ * know what he/she is doing!  Returns the device descriptor, an int.
+ */
+extern int prom_devopen(char *device_string);
+
+/* Close a previously opened device described by the passed integer
+ * descriptor.
+ */
+extern int prom_devclose(int device_handle);
+
+/* Do a seek operation on the device described by the passed integer
+ * descriptor.
+ */
+extern void prom_seek(int device_handle, unsigned int seek_hival,
+                      unsigned int seek_lowval);
+
+/* Machine memory configuration routine. */
+
+/* This function returns a V0 format memory descriptor table, it has three
+ * entries.  One for the total amount of physical ram on the machine, one
+ * for the amount of physical ram available, and one describing the virtual
+ * areas which are allocated by the prom.  So, in a sense the physical
+ * available is a calculation of the total physical minus the physical mapped
+ * by the prom with virtual mappings.
+ *
+ * These lists are returned pre-sorted, this should make your life easier
+ * since the prom itself is way too lazy to do such nice things.
+ */
+extern struct linux_mem_v0 *prom_meminfo(void);
+
+/* Miscellaneous routines, don't really fit in any category per se. */
+
+/* Reboot the machine with the command line passed. */
+extern void prom_reboot(char *boot_command);
+
+/* Evaluate the forth string passed. */
+extern void prom_feval(char *forth_string);
+
+/* Enter the prom, with possibility of continuation with the 'go'
+ * command in newer proms.
+ */
+extern void prom_cmdline(void);
+
+/* Enter the prom, with no chance of continuation for the stand-alone
+ * which calls this.
+ */
+extern void prom_halt(void);
+
+/* Set the PROM 'sync' callback function to the passed function pointer.
+ * When the user gives the 'sync' command at the prom prompt while the
+ * kernel is still active, the prom will call this routine.
+ *
+ * XXX The arguments are different on V0 vs. V2->higher proms, grrr! XXX
+ */
+typedef void (*sync_func_t)(void);
+extern void prom_setsync(sync_func_t func_ptr);
+
+/* Acquire the IDPROM of the root node in the prom device tree.  This
+ * gets passed a buffer where you would like it stuffed.  The return value
+ * is the format type of this idprom or 0xff on error.
+ */
+extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
+
+/* Get the prom major version. */
+extern int prom_version(void);
+
+/* Get the prom plugin revision. */
+extern int prom_getrev(void);
+
+/* Get the prom firmware revision. */
+extern int prom_getprev(void);
+
+/* Character operations to/from the console.... */
+
+/* Non-blocking get character from console. */
+extern int prom_nbgetchar(void);
+
+/* Non-blocking put character to console. */
+extern int prom_nbputchar(char character);
+
+/* Blocking get character from console. */
+extern char prom_getchar(void);
+
+/* Blocking put character to console. */
+extern void prom_putchar(char character);
+
+/* Prom's internal printf routine, don't use in kernel/boot code. */
+void prom_printf(char *fmt, ...);
+
+/* Query for input device type */
+
+enum prom_input_device {
+        PROMDEV_IKBD,                   /* input from keyboard */
+        PROMDEV_ITTYA,                  /* input from ttya */
+        PROMDEV_ITTYB,                  /* input from ttyb */
+        PROMDEV_I_UNK,
+};
+
+extern enum prom_input_device prom_query_input_device(void);
+
+/* Query for output device type */
+
+enum prom_output_device {
+        PROMDEV_OSCREEN,                /* to screen */
+        PROMDEV_OTTYA,                  /* to ttya */
+        PROMDEV_OTTYB,                  /* to ttyb */
+        PROMDEV_O_UNK,
+};
+
+extern enum prom_output_device prom_query_output_device(void);
+
+/* Multiprocessor operations... */
+
+/* Start the CPU with the given device tree node, context table, and context
+ * at the passed program counter.
+ */
+extern int prom_startcpu(int cpunode, struct linux_prom_registers *context_table,
+                         int context, char *program_counter);
+
+/* Stop the CPU with the passed device tree node. */
+extern int prom_stopcpu(int cpunode);
+
+/* Idle the CPU with the passed device tree node. */
+extern int prom_idlecpu(int cpunode);
+
+/* Re-Start the CPU with the passed device tree node. */
+extern int prom_restartcpu(int cpunode);
+
+/* PROM memory allocation facilities... */
+
+/* Allocated at possibly the given virtual address a chunk of the
+ * indicated size.
+ */
+extern char *prom_alloc(char *virt_hint, unsigned int size);
+
+/* Free a previously allocated chunk. */
+extern void prom_free(char *virt_addr, unsigned int size);
+
+/* Sun4/sun4c specific memory-management startup hook. */
+
+/* Map the passed segment in the given context at the passed
+ * virtual address.
+ */
+extern void prom_putsegment(int context, unsigned long virt_addr,
+                            int physical_segment);
+
+/* PROM device tree traversal functions... */
+
+/* Get the child node of the given node, or zero if no child exists. */
+extern int prom_getchild(int parent_node);
+
+/* Get the next sibling node of the given node, or zero if no further
+ * siblings exist.
+ */
+extern int prom_getsibling(int node);
+
+/* Get the length, at the passed node, of the given property type.
+ * Returns -1 on error (ie. no such property at this node).
+ */
+extern int prom_getproplen(int thisnode, char *property);
+
+/* Fetch the requested property using the given buffer.  Returns
+ * the number of bytes the prom put into your buffer or -1 on error.
+ */
+extern int prom_getproperty(int thisnode, char *property,
+                            char *prop_buffer, int propbuf_size);
+
+/* Acquire an integer property. */
+extern int prom_getint(int node, char *property);
+
+/* Acquire an integer property, with a default value. */
+extern int prom_getintdefault(int node, char *property, int defval);
+
+/* Acquire a boolean property, 0=FALSE 1=TRUE. */
+extern int prom_getbool(int node, char *prop);
+
+/* Acquire a string property, null string on error. */
+extern void prom_getstring(int node, char *prop, char *buf, int bufsize);
+
+/* Does the passed node have the given "name"? YES=1 NO=0 */
+extern int prom_nodematch(int thisnode, char *name);
+
+/* Search all siblings starting at the passed node for "name" matching
+ * the given string.  Returns the node on success, zero on failure.
+ */
+extern int prom_searchsiblings(int node_start, char *name);
+
+/* Return the first property type, as a string, for the given node.
+ * Returns a null string on error.
+ */
+extern char *prom_firstprop(int node);
+
+/* Returns the next property after the passed property for the given
+ * node.  Returns null string on failure.
+ */
+extern char *prom_nextprop(int node, char *prev_property);
+
+/* Returns 1 if the specified node has given property. */
+extern int prom_node_has_property(int node, char *property);
+
+/* Set the indicated property at the given node with the passed value.
+ * Returns the number of bytes of your value that the prom took.
+ */
+extern int prom_setprop(int node, char *prop_name, char *prop_value,
+                        int value_size);
+
+extern int prom_pathtoinode(char *path);
+extern int prom_inst2pkg(int);
+
+/* Dorking with Bus ranges... */
+
+/* Adjust reg values with the passed ranges. */
+extern void prom_adjust_regs(struct linux_prom_registers *regp, int nregs,
+                             struct linux_prom_ranges *rangep, int nranges);
+
+/* Adjust child ranges with the passed parent ranges. */
+extern void prom_adjust_ranges(struct linux_prom_ranges *cranges, int ncranges,
+                               struct linux_prom_ranges *pranges, int npranges);
+
+/* Apply promlib probed OBIO ranges to registers. */
+extern void prom_apply_obio_ranges(struct linux_prom_registers *obioregs, int nregs);
+
+/* Apply ranges of any prom node (and optionally parent node as well) to registers. */
+extern void prom_apply_generic_ranges(int node, int parent,
+                                      struct linux_prom_registers *sbusregs, int nregs);
+
+
+#endif /* !(__SPARC_OPLIB_H) */
diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h
new file mode 100644
index 000000000000..f2b4480cc98a
--- /dev/null
+++ b/arch/m68k/include/asm/page.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_no.h"
+#else
+#include "page_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/page_mm.h b/arch/m68k/include/asm/page_mm.h
new file mode 100644
index 000000000000..a34b8bad7847
--- /dev/null
+++ b/arch/m68k/include/asm/page_mm.h
@@ -0,0 +1,228 @@
+#ifndef _M68K_PAGE_H
+#define _M68K_PAGE_H
+
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#ifndef CONFIG_SUN3
+#define PAGE_SHIFT      (12)
+#else
+#define PAGE_SHIFT      (13)
+#endif
+#define PAGE_SIZE       (_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#if PAGE_SHIFT < 13
+#define THREAD_SIZE (8192)
+#else
+#define THREAD_SIZE PAGE_SIZE
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <linux/compiler.h>
+
+#include <asm/module.h>
+
+#define get_user_page(vaddr)            __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)      free_page(addr)
+
+/*
+ * We don't need to check for alignment etc.
+ */
+#ifdef CPU_M68040_OR_M68060_ONLY
+static inline void copy_page(void *to, void *from)
+{
+  unsigned long tmp;
+
+  __asm__ __volatile__("1:\t"
+                       ".chip 68040\n\t"
+                       "move16 %1@+,%0@+\n\t"
+                       "move16 %1@+,%0@+\n\t"
+                       ".chip 68k\n\t"
+                       "dbra  %2,1b\n\t"
+                       : "=a" (to), "=a" (from), "=d" (tmp)
+                       : "0" (to), "1" (from) , "2" (PAGE_SIZE / 32 - 1)
+                       );
+}
+
+static inline void clear_page(void *page)
+{
+        unsigned long tmp;
+        unsigned long *sp = page;
+
+        *sp++ = 0;
+        *sp++ = 0;
+        *sp++ = 0;
+        *sp++ = 0;
+
+        __asm__ __volatile__("1:\t"
+                             ".chip 68040\n\t"
+                             "move16 %2@+,%0@+\n\t"
+                             ".chip 68k\n\t"
+                             "subqw  #8,%2\n\t"
+                             "subqw  #8,%2\n\t"
+                             "dbra   %1,1b\n\t"
+                             : "=a" (sp), "=d" (tmp)
+                             : "a" (page), "0" (sp),
+                               "1" ((PAGE_SIZE - 16) / 16 - 1));
+}
+
+#else
+#define clear_page(page)        memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)      memcpy((to), (from), PAGE_SIZE)
+#endif
+
+#define clear_user_page(addr, vaddr, page)      \
+        do {    clear_page(addr);               \
+                flush_dcache_page(page);        \
+        } while (0)
+#define copy_user_page(to, from, vaddr, page)   \
+        do {    copy_page(to, from);            \
+                flush_dcache_page(page);        \
+        } while (0)
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((&x)->pmd[0])
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET             (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+extern unsigned long m68k_memoffset;
+
+#ifndef CONFIG_SUN3
+
+#define WANT_PAGE_VIRTUAL
+
+static inline unsigned long ___pa(void *vaddr)
+{
+        unsigned long paddr;
+        asm (
+                "1:     addl #0,%0\n"
+                m68k_fixup(%c2, 1b+2)
+                : "=r" (paddr)
+                : "0" (vaddr), "i" (m68k_fixup_memoffset));
+        return paddr;
+}
+#define __pa(vaddr)     ___pa((void *)(vaddr))
+static inline void *__va(unsigned long paddr)
+{
+        void *vaddr;
+        asm (
+                "1:     subl #0,%0\n"
+                m68k_fixup(%c2, 1b+2)
+                : "=r" (vaddr)
+                : "0" (paddr), "i" (m68k_fixup_memoffset));
+        return vaddr;
+}
+
+#else   /* !CONFIG_SUN3 */
+/* This #define is a horrible hack to suppress lots of warnings. --m */
+#define __pa(x) ___pa((unsigned long)(x))
+static inline unsigned long ___pa(unsigned long x)
+{
+     if(x == 0)
+          return 0;
+     if(x >= PAGE_OFFSET)
+        return (x-PAGE_OFFSET);
+     else
+        return (x+0x2000000);
+}
+
+static inline void *__va(unsigned long x)
+{
+     if(x == 0)
+          return (void *)0;
+
+     if(x < 0x2000000)
+        return (void *)(x+PAGE_OFFSET);
+     else
+        return (void *)(x-0x2000000);
+}
+#endif  /* CONFIG_SUN3 */
+
+/*
+ * NOTE: virtual isn't really correct, actually it should be the offset into the
+ * memory node, but we have no highmem, so that works for now.
+ * TODO: implement (fast) pfn<->pgdat_idx conversion functions, this makes lots
+ * of the shifts unnecessary.
+ */
+#define virt_to_pfn(kaddr)      (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)        __va((pfn) << PAGE_SHIFT)
+
+extern int m68k_virt_to_node_shift;
+
+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
+#define __virt_to_node(addr)    (&pg_data_map[0])
+#else
+extern struct pglist_data *pg_data_table[];
+
+static inline __attribute_const__ int __virt_to_node_shift(void)
+{
+        int shift;
+
+        asm (
+                "1:     moveq   #0,%0\n"
+                m68k_fixup(%c1, 1b)
+                : "=d" (shift)
+                : "i" (m68k_fixup_vnode_shift));
+        return shift;
+}
+
+#define __virt_to_node(addr)    (pg_data_table[(unsigned long)(addr) >> __virt_to_node_shift()])
+#endif
+
+#define virt_to_page(addr) ({                                           \
+        pfn_to_page(virt_to_pfn(addr));                                 \
+})
+#define page_to_virt(page) ({                                           \
+        pfn_to_virt(page_to_pfn(page));                                 \
+})
+
+#define pfn_to_page(pfn) ({                                             \
+        unsigned long __pfn = (pfn);                                    \
+        struct pglist_data *pgdat;                                      \
+        pgdat = __virt_to_node((unsigned long)pfn_to_virt(__pfn));      \
+        pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn);          \
+})
+#define page_to_pfn(_page) ({                                           \
+        struct page *__p = (_page);                                     \
+        struct pglist_data *pgdat;                                      \
+        pgdat = &pg_data_map[page_to_nid(__p)];                         \
+        ((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn;          \
+})
+
+#define virt_addr_valid(kaddr)  ((void *)(kaddr) >= (void *)PAGE_OFFSET && (void *)(kaddr) < high_memory)
+#define pfn_valid(pfn)          virt_addr_valid(pfn_to_virt(pfn))
+
+#endif /* __ASSEMBLY__ */
+
+#define VM_DATA_DEFAULT_FLAGS   (VM_READ | VM_WRITE | VM_EXEC | \
+                                 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+#include <asm-generic/page.h>
+
+#endif /* _M68K_PAGE_H */
diff --git a/arch/m68k/include/asm/page_no.h b/arch/m68k/include/asm/page_no.h
new file mode 100644
index 000000000000..3a1ede4544cb
--- /dev/null
+++ b/arch/m68k/include/asm/page_no.h
@@ -0,0 +1,77 @@
+#ifndef _M68KNOMMU_PAGE_H
+#define _M68KNOMMU_PAGE_H
+
+/* PAGE_SHIFT determines the page size */
+
+#define PAGE_SHIFT      (12)
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+ 
+#define get_user_page(vaddr)            __get_free_page(GFP_KERNEL)
+#define free_user_page(page, addr)      free_page(addr)
+
+#define clear_page(page)        memset((page), 0, PAGE_SIZE)
+#define copy_page(to,from)      memcpy((to), (from), PAGE_SIZE)
+
+#define clear_user_page(page, vaddr, pg)        clear_page(page)
+#define copy_user_page(to, from, vaddr, pg)     copy_page(to, from)
+
+#define __alloc_zeroed_user_highpage(movableflags, vma, vaddr) \
+        alloc_page_vma(GFP_HIGHUSER | __GFP_ZERO | movableflags, vma, vaddr)
+#define __HAVE_ARCH_ALLOC_ZEROED_USER_HIGHPAGE
+
+/*
+ * These are used to make use of C type-checking..
+ */
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd[16]; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+typedef struct page *pgtable_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((&x)->pmd[0])
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
+#endif /* !__ASSEMBLY__ */
+
+#include <asm/page_offset.h>
+
+#define PAGE_OFFSET             (PAGE_OFFSET_RAW)
+
+#ifndef __ASSEMBLY__
+
+#define __pa(vaddr)             virt_to_phys((void *)(vaddr))
+#define __va(paddr)             phys_to_virt((unsigned long)(paddr))
+
+#define virt_to_pfn(kaddr)      (__pa(kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)        __va((pfn) << PAGE_SHIFT)
+
+#define virt_to_page(addr)      (mem_map + (((unsigned long)(addr)-PAGE_OFFSET) >> PAGE_SHIFT))
+#define page_to_virt(page)      ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)        virt_to_page(pfn_to_virt(pfn))
+#define page_to_pfn(page)       virt_to_pfn(page_to_virt(page))
+#define pfn_valid(pfn)          ((pfn) < max_mapnr)
+
+#define virt_addr_valid(kaddr)  (((void *)(kaddr) >= (void *)PAGE_OFFSET) && \
+                                ((void *)(kaddr) < (void *)memory_end))
+
+#endif /* __ASSEMBLY__ */
+
+#include <asm-generic/page.h>
+
+#endif /* _M68KNOMMU_PAGE_H */
diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h
new file mode 100644
index 000000000000..66455c849fbb
--- /dev/null
+++ b/arch/m68k/include/asm/page_offset.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "page_offset_no.h"
+#else
+#include "page_offset_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/page_offset_mm.h b/arch/m68k/include/asm/page_offset_mm.h
new file mode 100644
index 000000000000..1cbdb7f30ac2
--- /dev/null
+++ b/arch/m68k/include/asm/page_offset_mm.h
@@ -0,0 +1,8 @@
+
+/* This handles the memory map.. */
+#ifndef CONFIG_SUN3
+#define PAGE_OFFSET_RAW         0x00000000
+#else
+#define PAGE_OFFSET_RAW         0x0E000000
+#endif
+
diff --git a/arch/m68k/include/asm/page_offset_no.h b/arch/m68k/include/asm/page_offset_no.h
new file mode 100644
index 000000000000..d4e73e0ba646
--- /dev/null
+++ b/arch/m68k/include/asm/page_offset_no.h
@@ -0,0 +1,5 @@
+
+
+/* This handles the memory map.. */
+#define PAGE_OFFSET_RAW         CONFIG_RAMBASE
+
diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h
new file mode 100644
index 000000000000..40d1112a4588
--- /dev/null
+++ b/arch/m68k/include/asm/param.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "param_no.h"
+#else
+#include "param_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/param_mm.h b/arch/m68k/include/asm/param_mm.h
new file mode 100644
index 000000000000..536a27888358
--- /dev/null
+++ b/arch/m68k/include/asm/param_mm.h
@@ -0,0 +1,22 @@
+#ifndef _M68K_PARAM_H
+#define _M68K_PARAM_H
+
+#ifdef __KERNEL__
+# define HZ             CONFIG_HZ       /* Internal kernel timer frequency */
+# define USER_HZ        100             /* .. some user interfaces are in "ticks" */
+# define CLOCKS_PER_SEC (USER_HZ)       /* like times() */
+#endif
+
+#ifndef HZ
+#define HZ 100
+#endif
+
+#define EXEC_PAGESIZE   8192
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+
+#endif /* _M68K_PARAM_H */
diff --git a/arch/m68k/include/asm/param_no.h b/arch/m68k/include/asm/param_no.h
new file mode 100644
index 000000000000..6044397adb64
--- /dev/null
+++ b/arch/m68k/include/asm/param_no.h
@@ -0,0 +1,22 @@
+#ifndef _M68KNOMMU_PARAM_H
+#define _M68KNOMMU_PARAM_H
+
+#ifdef __KERNEL__
+#define HZ CONFIG_HZ
+#define USER_HZ         HZ
+#define CLOCKS_PER_SEC  (USER_HZ)
+#endif
+
+#ifndef HZ
+#define HZ      100
+#endif
+
+#define EXEC_PAGESIZE   4096
+
+#ifndef NOGROUP
+#define NOGROUP         (-1)
+#endif
+
+#define MAXHOSTNAMELEN  64      /* max length of hostname */
+
+#endif /* _M68KNOMMU_PARAM_H */
diff --git a/arch/m68k/include/asm/parport.h b/arch/m68k/include/asm/parport.h
new file mode 100644
index 000000000000..646b1872f73b
--- /dev/null
+++ b/arch/m68k/include/asm/parport.h
@@ -0,0 +1,26 @@
+/*
+ * parport.h: platform-specific PC-style parport initialisation
+ *
+ * Copyright (C) 1999, 2000  Tim Waugh <tim@cyberelk.demon.co.uk>
+ *
+ * This file should only be included by drivers/parport/parport_pc.c.
+ *
+ * RZ: for use with Q40 and other ISA machines
+ */
+
+#ifndef _ASM_M68K_PARPORT_H
+#define _ASM_M68K_PARPORT_H 1
+
+#define insl(port,buf,len)   isa_insb(port,buf,(len)<<2)
+#define outsl(port,buf,len)  isa_outsb(port,buf,(len)<<2)
+
+/* no dma, or IRQ autoprobing */
+static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
+static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
+{
+        if (! (MACH_IS_Q40))
+          return 0; /* count=0 */
+        return parport_pc_find_isa_ports (PARPORT_IRQ_NONE, PARPORT_DMA_NONE);
+}
+
+#endif /* !(_ASM_M68K_PARPORT_H) */
diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h
new file mode 100644
index 000000000000..dbea95373080
--- /dev/null
+++ b/arch/m68k/include/asm/pci.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pci_no.h"
+#else
+#include "pci_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/pci_mm.h b/arch/m68k/include/asm/pci_mm.h
new file mode 100644
index 000000000000..4ad0aea48ab4
--- /dev/null
+++ b/arch/m68k/include/asm/pci_mm.h
@@ -0,0 +1,12 @@
+#ifndef _ASM_M68K_PCI_H
+#define _ASM_M68K_PCI_H
+
+#include <asm-generic/pci-dma-compat.h>
+
+/* The PCI address space does equal the physical memory
+ * address space.  The networking and block device layers use
+ * this boolean for bounce buffer decisions.
+ */
+#define PCI_DMA_BUS_IS_PHYS     (1)
+
+#endif /* _ASM_M68K_PCI_H */
diff --git a/arch/m68k/include/asm/pci_no.h b/arch/m68k/include/asm/pci_no.h
new file mode 100644
index 000000000000..9abbc03c73ee
--- /dev/null
+++ b/arch/m68k/include/asm/pci_no.h
@@ -0,0 +1,29 @@
+#ifndef M68KNOMMU_PCI_H
+#define M68KNOMMU_PCI_H
+
+#include <asm/pci_mm.h>
+
+#ifdef CONFIG_COMEMPCI
+/*
+ *      These are pretty much arbitary with the CoMEM implementation.
+ *      We have the whole address space to ourselves.
+ */
+#define PCIBIOS_MIN_IO          0x100
+#define PCIBIOS_MIN_MEM         0x00010000
+
+#define pcibios_scan_all_fns(a, b)      0
+
+/*
+ * Return whether the given PCI device DMA address mask can
+ * be supported properly.  For example, if your device can
+ * only drive the low 24-bits during PCI bus mastering, then
+ * you would pass 0x00ffffff as the mask to this function.
+ */
+static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask)
+{
+        return 1;
+}
+
+#endif /* CONFIG_COMEMPCI */
+
+#endif /* M68KNOMMU_PCI_H */
diff --git a/arch/m68k/include/asm/percpu.h b/arch/m68k/include/asm/percpu.h
new file mode 100644
index 000000000000..0859d048faf5
--- /dev/null
+++ b/arch/m68k/include/asm/percpu.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_M68K_PERCPU_H
+#define __ASM_M68K_PERCPU_H
+
+#include <asm-generic/percpu.h>
+
+#endif  /* __ASM_M68K_PERCPU_H */
diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h
new file mode 100644
index 000000000000..059cb73e78fc
--- /dev/null
+++ b/arch/m68k/include/asm/pgalloc.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgalloc_no.h"
+#else
+#include "pgalloc_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/pgalloc_mm.h b/arch/m68k/include/asm/pgalloc_mm.h
new file mode 100644
index 000000000000..4cb1a57ab763
--- /dev/null
+++ b/arch/m68k/include/asm/pgalloc_mm.h
@@ -0,0 +1,19 @@
+
+#ifndef M68K_PGALLOC_H
+#define M68K_PGALLOC_H
+
+#include <linux/mm.h>
+#include <linux/highmem.h>
+#include <asm/setup.h>
+#include <asm/virtconvert.h>
+
+
+#ifdef CONFIG_SUN3
+#include <asm/sun3_pgalloc.h>
+#else
+#include <asm/motorola_pgalloc.h>
+#endif
+
+extern void m68k_setup_node(int node);
+
+#endif /* M68K_PGALLOC_H */
diff --git a/arch/m68k/include/asm/pgalloc_no.h b/arch/m68k/include/asm/pgalloc_no.h
new file mode 100644
index 000000000000..d6352f671ec0
--- /dev/null
+++ b/arch/m68k/include/asm/pgalloc_no.h
@@ -0,0 +1,8 @@
+#ifndef _M68KNOMMU_PGALLOC_H
+#define _M68KNOMMU_PGALLOC_H
+
+#include <asm/setup.h>
+
+#define check_pgt_cache()       do { } while (0)
+
+#endif /* _M68KNOMMU_PGALLOC_H */
diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h
new file mode 100644
index 000000000000..ee6759eb445a
--- /dev/null
+++ b/arch/m68k/include/asm/pgtable.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "pgtable_no.h"
+#else
+#include "pgtable_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/pgtable_mm.h b/arch/m68k/include/asm/pgtable_mm.h
new file mode 100644
index 000000000000..0b604f0f192d
--- /dev/null
+++ b/arch/m68k/include/asm/pgtable_mm.h
@@ -0,0 +1,166 @@
+#ifndef _M68K_PGTABLE_H
+#define _M68K_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+#include <asm/setup.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/processor.h>
+#include <linux/sched.h>
+#include <linux/threads.h>
+
+/*
+ * This file contains the functions and defines necessary to modify and use
+ * the m68k page table tree.
+ */
+
+#include <asm/virtconvert.h>
+
+/* Certain architectures need to do special things when pte's
+ * within a page table are directly modified.  Thus, the following
+ * hook is made available.
+ */
+#define set_pte(pteptr, pteval)                                 \
+        do{                                                     \
+                *(pteptr) = (pteval);                           \
+        } while(0)
+#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
+
+
+/* PMD_SHIFT determines the size of the area a second-level page table can map */
+#ifdef CONFIG_SUN3
+#define PMD_SHIFT       17
+#else
+#define PMD_SHIFT       22
+#endif
+#define PMD_SIZE        (1UL << PMD_SHIFT)
+#define PMD_MASK        (~(PMD_SIZE-1))
+
+/* PGDIR_SHIFT determines what a third-level page table entry can map */
+#ifdef CONFIG_SUN3
+#define PGDIR_SHIFT     17
+#else
+#define PGDIR_SHIFT     25
+#endif
+#define PGDIR_SIZE      (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK      (~(PGDIR_SIZE-1))
+
+/*
+ * entries per page directory level: the m68k is configured as three-level,
+ * so we do have PMD level physically.
+ */
+#ifdef CONFIG_SUN3
+#define PTRS_PER_PTE   16
+#define PTRS_PER_PMD   1
+#define PTRS_PER_PGD   2048
+#else
+#define PTRS_PER_PTE    1024
+#define PTRS_PER_PMD    8
+#define PTRS_PER_PGD    128
+#endif
+#define USER_PTRS_PER_PGD       (TASK_SIZE/PGDIR_SIZE)
+#define FIRST_USER_ADDRESS      0
+
+/* Virtual address region for use by kernel_map() */
+#ifdef CONFIG_SUN3
+#define KMAP_START     0x0DC00000
+#define KMAP_END       0x0E000000
+#else
+#define KMAP_START      0xd0000000
+#define KMAP_END        0xf0000000
+#endif
+
+#ifndef CONFIG_SUN3
+/* Just any arbitrary offset to the start of the vmalloc VM area: the
+ * current 8MB value just means that there will be a 8MB "hole" after the
+ * physical memory until the kernel virtual memory starts.  That means that
+ * any out-of-bounds memory accesses will hopefully be caught.
+ * The vmalloc() routines leaves a hole of 4kB between each vmalloced
+ * area for the same reason. ;)
+ */
+#define VMALLOC_OFFSET  (8*1024*1024)
+#define VMALLOC_START (((unsigned long) high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1))
+#define VMALLOC_END KMAP_START
+#else
+extern unsigned long vmalloc_end;
+#define VMALLOC_START 0x0f800000
+#define VMALLOC_END vmalloc_end
+#endif /* CONFIG_SUN3 */
+
+/* zero page used for uninitialized stuff */
+extern void *empty_zero_page;
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)        (virt_to_page(empty_zero_page))
+
+/* number of bits that fit into a memory pointer */
+#define BITS_PER_PTR                    (8*sizeof(unsigned long))
+
+/* to align the pointer to a pointer address */
+#define PTR_MASK                        (~(sizeof(void*)-1))
+
+/* sizeof(void*)==1<<SIZEOF_PTR_LOG2 */
+/* 64-bit machines, beware!  SRB. */
+#define SIZEOF_PTR_LOG2                        2
+
+extern void kernel_set_cachemode(void *addr, unsigned long size, int cmode);
+
+/*
+ * The m68k doesn't have any external MMU info: the kernel page
+ * tables contain all the necessary information.  The Sun3 does, but
+ * they are updated on demand.
+ */
+static inline void update_mmu_cache(struct vm_area_struct *vma,
+                                    unsigned long address, pte_t pte)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#define kern_addr_valid(addr)   (1)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)         \
+                remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/* MMU-specific headers */
+
+#ifdef CONFIG_SUN3
+#include <asm/sun3_pgtable.h>
+#else
+#include <asm/motorola_pgtable.h>
+#endif
+
+#ifndef __ASSEMBLY__
+#include <asm-generic/pgtable.h>
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+#ifdef SUN3_PAGE_NOCACHE
+# define __SUN3_PAGE_NOCACHE    SUN3_PAGE_NOCACHE
+#else
+# define __SUN3_PAGE_NOCACHE    0
+#endif
+#define pgprot_noncached(prot)                                                  \
+        (MMU_IS_SUN3                                                            \
+         ? (__pgprot(pgprot_val(prot) | __SUN3_PAGE_NOCACHE))                   \
+         : ((MMU_IS_851 || MMU_IS_030)                                          \
+            ? (__pgprot(pgprot_val(prot) | _PAGE_NOCACHE030))                   \
+            : (MMU_IS_040 || MMU_IS_060)                                        \
+            ? (__pgprot((pgprot_val(prot) & _CACHEMASK040) | _PAGE_NOCACHE_S))  \
+            : (prot)))
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * No page table caches to initialise
+ */
+#define pgtable_cache_init()    do { } while (0)
+
+#define check_pgt_cache()       do { } while (0)
+
+#endif /* _M68K_PGTABLE_H */
diff --git a/arch/m68k/include/asm/pgtable_no.h b/arch/m68k/include/asm/pgtable_no.h
new file mode 100644
index 000000000000..46251016e821
--- /dev/null
+++ b/arch/m68k/include/asm/pgtable_no.h
@@ -0,0 +1,70 @@
+#ifndef _M68KNOMMU_PGTABLE_H
+#define _M68KNOMMU_PGTABLE_H
+
+#include <asm-generic/4level-fixup.h>
+
+/*
+ * (C) Copyright 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <linux/slab.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/io.h>
+
+/*
+ * Trivial page table functions.
+ */
+#define pgd_present(pgd)        (1)
+#define pgd_none(pgd)           (0)
+#define pgd_bad(pgd)            (0)
+#define pgd_clear(pgdp)
+#define kern_addr_valid(addr)   (1)
+#define pmd_offset(a, b)        ((void *)0)
+
+#define PAGE_NONE       __pgprot(0)
+#define PAGE_SHARED     __pgprot(0)
+#define PAGE_COPY       __pgprot(0)
+#define PAGE_READONLY   __pgprot(0)
+#define PAGE_KERNEL     __pgprot(0)
+
+extern void paging_init(void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define __swp_type(x)           (0)
+#define __swp_offset(x)         (0)
+#define __swp_entry(typ,off)    ((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)   ((pte_t) { (x).val })
+
+static inline int pte_file(pte_t pte) { return 0; }
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+#define ZERO_PAGE(vaddr)        (virt_to_page(0))
+
+/*
+ * These would be in other places but having them here reduces the diffs.
+ */
+extern unsigned int kobjsize(const void *objp);
+
+/*
+ * No page table caches to initialise.
+ */
+#define pgtable_cache_init()    do { } while (0)
+
+#define io_remap_pfn_range(vma, vaddr, pfn, size, prot)         \
+                remap_pfn_range(vma, vaddr, pfn, size, prot)
+
+/*
+ * All 32bit addresses are effectively valid for vmalloc...
+ * Sort of meaningless for non-VM targets.
+ */
+#define VMALLOC_START   0
+#define VMALLOC_END     0xffffffff
+
+#include <asm-generic/pgtable.h>
+
+#endif /* _M68KNOMMU_PGTABLE_H */
diff --git a/arch/m68k/include/asm/poll.h b/arch/m68k/include/asm/poll.h
new file mode 100644
index 000000000000..f080fcdb61bf
--- /dev/null
+++ b/arch/m68k/include/asm/poll.h
@@ -0,0 +1,9 @@
+#ifndef __m68k_POLL_H
+#define __m68k_POLL_H
+
+#define POLLWRNORM      POLLOUT
+#define POLLWRBAND      256
+
+#include <asm-generic/poll.h>
+
+#endif
diff --git a/arch/m68k/include/asm/posix_types.h b/arch/m68k/include/asm/posix_types.h
new file mode 100644
index 000000000000..63cdcc142d93
--- /dev/null
+++ b/arch/m68k/include/asm/posix_types.h
@@ -0,0 +1,61 @@
+#ifndef __ARCH_M68K_POSIX_TYPES_H
+#define __ARCH_M68K_POSIX_TYPES_H
+
+/*
+ * This file is generally used by user-level software, so you need to
+ * be a little careful about namespace pollution etc.  Also, we cannot
+ * assume GCC is being used.
+ */
+
+typedef unsigned long   __kernel_ino_t;
+typedef unsigned short  __kernel_mode_t;
+typedef unsigned short  __kernel_nlink_t;
+typedef long            __kernel_off_t;
+typedef int             __kernel_pid_t;
+typedef unsigned short  __kernel_ipc_pid_t;
+typedef unsigned short  __kernel_uid_t;
+typedef unsigned short  __kernel_gid_t;
+typedef unsigned int    __kernel_size_t;
+typedef int             __kernel_ssize_t;
+typedef int             __kernel_ptrdiff_t;
+typedef long            __kernel_time_t;
+typedef long            __kernel_suseconds_t;
+typedef long            __kernel_clock_t;
+typedef int             __kernel_timer_t;
+typedef int             __kernel_clockid_t;
+typedef int             __kernel_daddr_t;
+typedef char *          __kernel_caddr_t;
+typedef unsigned short  __kernel_uid16_t;
+typedef unsigned short  __kernel_gid16_t;
+typedef unsigned int    __kernel_uid32_t;
+typedef unsigned int    __kernel_gid32_t;
+
+typedef unsigned short  __kernel_old_uid_t;
+typedef unsigned short  __kernel_old_gid_t;
+typedef unsigned short  __kernel_old_dev_t;
+
+#ifdef __GNUC__
+typedef long long       __kernel_loff_t;
+#endif
+
+typedef struct {
+        int     val[2];
+} __kernel_fsid_t;
+
+#if defined(__KERNEL__)
+
+#undef  __FD_SET
+#define __FD_SET(d, set)        ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
+
+#undef  __FD_CLR
+#define __FD_CLR(d, set)        ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
+
+#undef  __FD_ISSET
+#define __FD_ISSET(d, set)      ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
+
+#undef  __FD_ZERO
+#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
+
+#endif /* defined(__KERNEL__) */
+
+#endif
diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h
new file mode 100644
index 000000000000..fc3f2c22f2b8
--- /dev/null
+++ b/arch/m68k/include/asm/processor.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "processor_no.h"
+#else
+#include "processor_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/processor_mm.h b/arch/m68k/include/asm/processor_mm.h
new file mode 100644
index 000000000000..1f61ef53f0e0
--- /dev/null
+++ b/arch/m68k/include/asm/processor_mm.h
@@ -0,0 +1,130 @@
+/*
+ * include/asm-m68k/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/thread_info.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+
+static inline unsigned long rdusp(void)
+{
+        unsigned long usp;
+
+        __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+        return usp;
+}
+
+static inline void wrusp(unsigned long usp)
+{
+        __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_SIZE       (0xF0000000UL)
+#else
+#define TASK_SIZE       (0x0E000000UL)
+#endif
+
+#ifdef __KERNEL__
+#define STACK_TOP       TASK_SIZE
+#define STACK_TOP_MAX   STACK_TOP
+#endif
+
+/* This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.
+ */
+#ifndef CONFIG_SUN3
+#define TASK_UNMAPPED_BASE      0xC0000000UL
+#else
+#define TASK_UNMAPPED_BASE      0x0A000000UL
+#endif
+#define TASK_UNMAPPED_ALIGN(addr, off)  PAGE_ALIGN(addr)
+
+struct thread_struct {
+        unsigned long  ksp;             /* kernel stack pointer */
+        unsigned long  usp;             /* user stack pointer */
+        unsigned short sr;              /* saved status register */
+        unsigned short fs;              /* saved fs (sfc, dfc) */
+        unsigned long  crp[2];          /* cpu root pointer */
+        unsigned long  esp0;            /* points to SR of stack frame */
+        unsigned long  faddr;           /* info about last fault */
+        int            signo, code;
+        unsigned long  fp[8*3];
+        unsigned long  fpcntl[3];       /* fp control regs */
+        unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+        struct thread_info info;
+};
+
+#define INIT_THREAD  {                                                  \
+        .ksp    = sizeof(init_stack) + (unsigned long) init_stack,      \
+        .sr     = PS_S,                                                 \
+        .fs     = __KERNEL_DS,                                          \
+        .info   = INIT_THREAD_INFO(init_task),                          \
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ */
+static inline void start_thread(struct pt_regs * regs, unsigned long pc,
+                                unsigned long usp)
+{
+        /* reads from user space */
+        set_fs(USER_DS);
+
+        regs->pc = pc;
+        regs->sr &= ~0x2000;
+        wrusp(usp);
+}
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+extern unsigned long thread_saved_pc(struct task_struct *tsk);
+
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)   \
+    ({                  \
+        unsigned long eip = 0;   \
+        if ((tsk)->thread.esp0 > PAGE_SIZE && \
+            (virt_addr_valid((tsk)->thread.esp0))) \
+              eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+        eip; })
+#define KSTK_ESP(tsk)   ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()     barrier()
+
+#endif
diff --git a/arch/m68k/include/asm/processor_no.h b/arch/m68k/include/asm/processor_no.h
new file mode 100644
index 000000000000..91cba18acdd3
--- /dev/null
+++ b/arch/m68k/include/asm/processor_no.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-m68knommu/processor.h
+ *
+ * Copyright (C) 1995 Hamish Macdonald
+ */
+
+#ifndef __ASM_M68K_PROCESSOR_H
+#define __ASM_M68K_PROCESSOR_H
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l;})
+
+#include <linux/compiler.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/segment.h>
+#include <asm/fpu.h>
+#include <asm/ptrace.h>
+#include <asm/current.h>
+
+static inline unsigned long rdusp(void)
+{
+#ifdef CONFIG_COLDFIRE
+        extern unsigned int sw_usp;
+        return(sw_usp);
+#else
+        unsigned long usp;
+        __asm__ __volatile__("move %/usp,%0" : "=a" (usp));
+        return usp;
+#endif
+}
+
+static inline void wrusp(unsigned long usp)
+{
+#ifdef CONFIG_COLDFIRE
+        extern unsigned int sw_usp;
+        sw_usp = usp;
+#else
+        __asm__ __volatile__("move %0,%/usp" : : "a" (usp));
+#endif
+}
+
+/*
+ * User space process size: 3.75GB. This is hardcoded into a few places,
+ * so don't change it unless you know what you are doing.
+ */
+#define TASK_SIZE       (0xF0000000UL)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's. We won't be using it
+ */
+#define TASK_UNMAPPED_BASE      0
+
+/* 
+ * if you change this structure, you must change the code and offsets
+ * in m68k/machasm.S
+ */
+   
+struct thread_struct {
+        unsigned long  ksp;             /* kernel stack pointer */
+        unsigned long  usp;             /* user stack pointer */
+        unsigned short sr;              /* saved status register */
+        unsigned short fs;              /* saved fs (sfc, dfc) */
+        unsigned long  crp[2];          /* cpu root pointer */
+        unsigned long  esp0;            /* points to SR of stack frame */
+        unsigned long  fp[8*3];
+        unsigned long  fpcntl[3];       /* fp control regs */
+        unsigned char  fpstate[FPSTATESIZE];  /* floating point state */
+};
+
+#define INIT_THREAD  { \
+        sizeof(init_stack) + (unsigned long) init_stack, 0, \
+        PS_S, __KERNEL_DS, \
+        {0, 0}, 0, {0,}, {0, 0, 0}, {0,}, \
+}
+
+/*
+ * Coldfire stacks need to be re-aligned on trap exit, conventional
+ * 68k can handle this case cleanly.
+ */
+#if defined(CONFIG_COLDFIRE)
+#define reformat(_regs)         do { (_regs)->format = 0x4; } while(0)
+#else
+#define reformat(_regs)         do { } while (0)
+#endif
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ *
+ * pass the data segment into user programs if it exists,
+ * it can't hurt anything as far as I can tell
+ */
+#define start_thread(_regs, _pc, _usp)                  \
+do {                                                    \
+        set_fs(USER_DS); /* reads from user space */    \
+        (_regs)->pc = (_pc);                            \
+        ((struct switch_stack *)(_regs))[-1].a6 = 0;    \
+        reformat(_regs);                                \
+        if (current->mm)                                \
+                (_regs)->d5 = current->mm->start_data;  \
+        (_regs)->sr &= ~0x2000;                         \
+        wrusp(_usp);                                    \
+} while(0)
+
+/* Forward declaration, a strange C thing */
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)    do { } while (0)
+
+extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
+
+/*
+ * Free current thread data structures etc..
+ */
+static inline void exit_thread(void)
+{
+}
+
+unsigned long thread_saved_pc(struct task_struct *tsk);
+unsigned long get_wchan(struct task_struct *p);
+
+#define KSTK_EIP(tsk)   \
+    ({                  \
+        unsigned long eip = 0;   \
+        if ((tsk)->thread.esp0 > PAGE_SIZE && \
+            (virt_addr_valid((tsk)->thread.esp0))) \
+              eip = ((struct pt_regs *) (tsk)->thread.esp0)->pc; \
+        eip; })
+#define KSTK_ESP(tsk)   ((tsk) == current ? rdusp() : (tsk)->thread.usp)
+
+#define cpu_relax()    barrier()
+
+#endif
diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h
new file mode 100644
index 000000000000..e83cd2f66101
--- /dev/null
+++ b/arch/m68k/include/asm/ptrace.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ptrace_no.h"
+#else
+#include "ptrace_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/ptrace_mm.h b/arch/m68k/include/asm/ptrace_mm.h
new file mode 100644
index 000000000000..57e763d79bf4
--- /dev/null
+++ b/arch/m68k/include/asm/ptrace_mm.h
@@ -0,0 +1,80 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1      0
+#define PT_D2      1
+#define PT_D3      2
+#define PT_D4      3
+#define PT_D5      4
+#define PT_D6      5
+#define PT_D7      6
+#define PT_A0      7
+#define PT_A1      8
+#define PT_A2      9
+#define PT_A3      10
+#define PT_A4      11
+#define PT_A5      12
+#define PT_A6      13
+#define PT_D0      14
+#define PT_USP     15
+#define PT_ORIG_D0 16
+#define PT_SR      17
+#define PT_PC      18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+  unsigned short sr;
+  unsigned long  pc;
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+        unsigned long  d6;
+        unsigned long  d7;
+        unsigned long  a3;
+        unsigned long  a4;
+        unsigned long  a5;
+        unsigned long  a6;
+        unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/ptrace_no.h b/arch/m68k/include/asm/ptrace_no.h
new file mode 100644
index 000000000000..8c9194b98548
--- /dev/null
+++ b/arch/m68k/include/asm/ptrace_no.h
@@ -0,0 +1,87 @@
+#ifndef _M68K_PTRACE_H
+#define _M68K_PTRACE_H
+
+#define PT_D1      0
+#define PT_D2      1
+#define PT_D3      2
+#define PT_D4      3
+#define PT_D5      4
+#define PT_D6      5
+#define PT_D7      6
+#define PT_A0      7
+#define PT_A1      8
+#define PT_A2      9
+#define PT_A3      10
+#define PT_A4      11
+#define PT_A5      12
+#define PT_A6      13
+#define PT_D0      14
+#define PT_USP     15
+#define PT_ORIG_D0 16
+#define PT_SR      17
+#define PT_PC      18
+
+#ifndef __ASSEMBLY__
+
+/* this struct defines the way the registers are stored on the
+   stack during a system call. */
+
+struct pt_regs {
+  long     d1;
+  long     d2;
+  long     d3;
+  long     d4;
+  long     d5;
+  long     a0;
+  long     a1;
+  long     a2;
+  long     d0;
+  long     orig_d0;
+  long     stkadj;
+#ifdef CONFIG_COLDFIRE
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+  unsigned short sr;
+  unsigned long  pc;
+#else
+  unsigned short sr;
+  unsigned long  pc;
+  unsigned format :  4; /* frame format specifier */
+  unsigned vector : 12; /* vector offset */
+#endif
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+        unsigned long  d6;
+        unsigned long  d7;
+        unsigned long  a3;
+        unsigned long  a4;
+        unsigned long  a5;
+        unsigned long  a6;
+        unsigned long  retpc;
+};
+
+/* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
+#define PTRACE_GETREGS            12
+#define PTRACE_SETREGS            13
+#define PTRACE_GETFPREGS          14
+#define PTRACE_SETFPREGS          15
+
+#ifdef __KERNEL__
+
+#ifndef PS_S
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#endif
+
+#define user_mode(regs) (!((regs)->sr & PS_S))
+#define instruction_pointer(regs) ((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+extern void show_regs(struct pt_regs *);
+#endif /* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+#endif /* _M68K_PTRACE_H */
diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h
new file mode 100644
index 000000000000..3907a09d4fca
--- /dev/null
+++ b/arch/m68k/include/asm/q40_master.h
@@ -0,0 +1,69 @@
+/*
+ * Q40 master Chip Control
+ * RTC stuff merged for compactnes..
+*/
+
+#ifndef _Q40_MASTER_H
+#define _Q40_MASTER_H
+
+#include <asm/raw_io.h>
+
+
+#define q40_master_addr 0xff000000
+
+#define IIRQ_REG            0x0       /* internal IRQ reg */
+#define EIRQ_REG            0x4       /* external ... */
+#define KEYCODE_REG         0x1c      /* value of received scancode  */
+#define DISPLAY_CONTROL_REG 0x18
+#define FRAME_CLEAR_REG     0x24
+#define LED_REG             0x30
+
+#define Q40_LED_ON()        master_outb(1,LED_REG)
+#define Q40_LED_OFF()       master_outb(0,LED_REG)
+
+#define INTERRUPT_REG       IIRQ_REG  /* "native" ints */
+#define KEY_IRQ_ENABLE_REG  0x08      /**/
+#define KEYBOARD_UNLOCK_REG 0x20      /* clear kb int */
+
+#define SAMPLE_ENABLE_REG   0x14      /* generate SAMPLE ints */
+#define SAMPLE_RATE_REG     0x2c
+#define SAMPLE_CLEAR_REG    0x28
+#define SAMPLE_LOW          0x00
+#define SAMPLE_HIGH         0x01
+
+#define FRAME_RATE_REG       0x38      /* generate FRAME ints at 200 HZ rate */
+
+#if 0
+#define SER_ENABLE_REG      0x0c      /* allow serial ints to be generated */
+#endif
+#define EXT_ENABLE_REG      0x10      /* ... rest of the ISA ints ... */
+
+
+#define master_inb(_reg_)      in_8((unsigned char *)q40_master_addr+_reg_)
+#define master_outb(_b_,_reg_)  out_8((unsigned char *)q40_master_addr+_reg_,_b_)
+
+/* RTC defines */
+
+#define Q40_RTC_BASE        (0xff021ffc)
+
+#define Q40_RTC_YEAR        (*(volatile unsigned char *)(Q40_RTC_BASE+0))
+#define Q40_RTC_MNTH        (*(volatile unsigned char *)(Q40_RTC_BASE-4))
+#define Q40_RTC_DATE        (*(volatile unsigned char *)(Q40_RTC_BASE-8))
+#define Q40_RTC_DOW         (*(volatile unsigned char *)(Q40_RTC_BASE-12))
+#define Q40_RTC_HOUR        (*(volatile unsigned char *)(Q40_RTC_BASE-16))
+#define Q40_RTC_MINS        (*(volatile unsigned char *)(Q40_RTC_BASE-20))
+#define Q40_RTC_SECS        (*(volatile unsigned char *)(Q40_RTC_BASE-24))
+#define Q40_RTC_CTRL        (*(volatile unsigned char *)(Q40_RTC_BASE-28))
+
+/* some control bits */
+#define Q40_RTC_READ   64  /* prepare for reading */
+#define Q40_RTC_WRITE  128
+
+/* define some Q40 specific ints */
+#include "q40ints.h"
+
+/* misc defs */
+#define DAC_LEFT  ((unsigned char *)0xff008000)
+#define DAC_RIGHT ((unsigned char *)0xff008004)
+
+#endif /* _Q40_MASTER_H */
diff --git a/arch/m68k/include/asm/q40ints.h b/arch/m68k/include/asm/q40ints.h
new file mode 100644
index 000000000000..3d970afb708f
--- /dev/null
+++ b/arch/m68k/include/asm/q40ints.h
@@ -0,0 +1,29 @@
+/*
+ * contains some Q40 related interrupt definitions
+ */
+
+#define Q40_IRQ_MAX      (34)
+
+#define Q40_IRQ_SAMPLE    (34)
+#define Q40_IRQ_KEYBOARD (32)
+#define Q40_IRQ_FRAME    (33)
+
+
+/* masks for interrupt regiosters*/
+/* internal, IIRQ_REG */
+#define Q40_IRQ_KEYB_MASK    (2)
+#define Q40_IRQ_SER_MASK     (1<<2)
+#define Q40_IRQ_FRAME_MASK   (1<<3)
+#define Q40_IRQ_EXT_MASK     (1<<4)    /* is a EIRQ */
+/* eirq, EIRQ_REG */
+#define Q40_IRQ3_MASK        (1)
+#define Q40_IRQ4_MASK        (1<<1)
+#define Q40_IRQ5_MASK        (1<<2)
+#define Q40_IRQ6_MASK        (1<<3)
+#define Q40_IRQ7_MASK        (1<<4)
+#define Q40_IRQ10_MASK       (1<<5)
+#define Q40_IRQ14_MASK       (1<<6)
+#define Q40_IRQ15_MASK       (1<<7)
+
+extern unsigned long q40_probe_irq_on (void);
+extern int q40_probe_irq_off (unsigned long irqs);
diff --git a/arch/m68k/include/asm/quicc_simple.h b/arch/m68k/include/asm/quicc_simple.h
new file mode 100644
index 000000000000..c3636932d4bc
--- /dev/null
+++ b/arch/m68k/include/asm/quicc_simple.h
@@ -0,0 +1,52 @@
+/***********************************
+ * $Id: quicc_simple.h,v 1.1 2002/03/02 15:01:10 gerg Exp $
+ ***********************************
+ *
+ ***************************************
+ * Simple drivers common header
+ ***************************************
+ */
+
+#ifndef __SIMPLE_H
+#define __SIMPLE_H
+
+/* #include "quicc.h" */
+
+#define GLB_SCC_0   0
+#define GLB_SCC_1   1
+#define GLB_SCC_2   2
+#define GLB_SCC_3   3
+
+typedef void (int_routine)(unsigned short interrupt_event);
+typedef int_routine *int_routine_ptr; 
+typedef void *(alloc_routine)(int length);
+typedef void (free_routine)(int scc_num, int channel_num, void *buf);
+typedef void (store_rx_buffer_routine)(int scc_num, int channel_num, void *buff, int length);
+typedef int  (handle_tx_error_routine)(int scc_num, int channel_num, QUICC_BD *tbd);
+typedef void (handle_rx_error_routine)(int scc_num, int channel_num, QUICC_BD *rbd);
+typedef void (handle_lost_error_routine)(int scc_num, int channel_num);
+
+/* user defined functions for global errors */
+typedef void (handle_glob_overrun_routine)(int scc_number);
+typedef void (handle_glob_underrun_routine)(int scc_number);
+typedef void (glob_intr_q_overflow_routine)(int scc_number);
+
+/*
+ * General initialization and command routines
+ */
+void quicc_issue_cmd (unsigned short cmd, int scc_num);
+void quicc_init(void);
+void quicc_scc_init(int scc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_smc_init(int smc_number, int number_of_rx_buf, int number_of_tx_buf);
+void quicc_scc_start(int scc_num);
+void quicc_scc_loopback(int scc_num);
+
+/* Interrupt enable/disable routines for critical pieces of code*/
+unsigned short  IntrDis(void);
+void            IntrEna(unsigned short old_sr);
+
+/* For debugging */
+void print_rbd(int scc_num);
+void print_tbd(int scc_num);
+
+#endif
diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h
new file mode 100644
index 000000000000..d9eb9834ccc8
--- /dev/null
+++ b/arch/m68k/include/asm/raw_io.h
@@ -0,0 +1,347 @@
+/*
+ * linux/include/asm-m68k/raw_io.h
+ *
+ * 10/20/00 RZ: - created from bits of io.h and ide.h to cleanup namespace
+ *
+ */
+
+#ifndef _RAW_IO_H
+#define _RAW_IO_H
+
+#ifdef __KERNEL__
+
+#include <asm/types.h>
+
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING              0
+#define IOMAP_NOCACHE_SER               1
+#define IOMAP_NOCACHE_NONSER            2
+#define IOMAP_WRITETHROUGH              3
+
+extern void iounmap(void __iomem *addr);
+
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
+                       int cacheflag);
+extern void __iounmap(void *addr, unsigned long size);
+
+
+/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
+ * two accesses to memory, which may be undesirable for some devices.
+ */
+#define in_8(addr) \
+    ({ u8 __v = (*(__force volatile u8 *) (addr)); __v; })
+#define in_be16(addr) \
+    ({ u16 __v = (*(__force volatile u16 *) (addr)); __v; })
+#define in_be32(addr) \
+    ({ u32 __v = (*(__force volatile u32 *) (addr)); __v; })
+#define in_le16(addr) \
+    ({ u16 __v = le16_to_cpu(*(__force volatile __le16 *) (addr)); __v; })
+#define in_le32(addr) \
+    ({ u32 __v = le32_to_cpu(*(__force volatile __le32 *) (addr)); __v; })
+
+#define out_8(addr,b) (void)((*(__force volatile u8 *) (addr)) = (b))
+#define out_be16(addr,w) (void)((*(__force volatile u16 *) (addr)) = (w))
+#define out_be32(addr,l) (void)((*(__force volatile u32 *) (addr)) = (l))
+#define out_le16(addr,w) (void)((*(__force volatile __le16 *) (addr)) = cpu_to_le16(w))
+#define out_le32(addr,l) (void)((*(__force volatile __le32 *) (addr)) = cpu_to_le32(l))
+
+#define raw_inb in_8
+#define raw_inw in_be16
+#define raw_inl in_be32
+#define __raw_readb in_8
+#define __raw_readw in_be16
+#define __raw_readl in_be32
+
+#define raw_outb(val,port) out_8((port),(val))
+#define raw_outw(val,port) out_be16((port),(val))
+#define raw_outl(val,port) out_be32((port),(val))
+#define __raw_writeb(val,addr) out_8((addr),(val))
+#define __raw_writew(val,addr) out_be16((addr),(val))
+#define __raw_writel(val,addr) out_be32((addr),(val))
+
+static inline void raw_insb(volatile u8 __iomem *port, u8 *buf, unsigned int len)
+{
+        unsigned int i;
+
+        for (i = 0; i < len; i++)
+                *buf++ = in_8(port);
+}
+
+static inline void raw_outsb(volatile u8 __iomem *port, const u8 *buf,
+                             unsigned int len)
+{
+        unsigned int i;
+
+        for (i = 0; i < len; i++)
+                out_8(port, *buf++);
+}
+
+static inline void raw_insw(volatile u16 __iomem *port, u16 *buf, unsigned int nr)
+{
+        unsigned int tmp;
+
+        if (nr & 15) {
+                tmp = (nr & 15) - 1;
+                asm volatile (
+                        "1: movew %2@,%0@+; dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+        if (nr >> 4) {
+                tmp = (nr >> 4) - 1;
+                asm volatile (
+                        "1: "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "movew %2@,%0@+; "
+                        "dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+}
+
+static inline void raw_outsw(volatile u16 __iomem *port, const u16 *buf,
+                             unsigned int nr)
+{
+        unsigned int tmp;
+
+        if (nr & 15) {
+                tmp = (nr & 15) - 1;
+                asm volatile (
+                        "1: movew %0@+,%2@; dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+        if (nr >> 4) {
+                tmp = (nr >> 4) - 1;
+                asm volatile (
+                        "1: "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "movew %0@+,%2@; "
+                        "dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+}
+
+static inline void raw_insl(volatile u32 __iomem *port, u32 *buf, unsigned int nr)
+{
+        unsigned int tmp;
+
+        if (nr & 15) {
+                tmp = (nr & 15) - 1;
+                asm volatile (
+                        "1: movel %2@,%0@+; dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+        if (nr >> 4) {
+                tmp = (nr >> 4) - 1;
+                asm volatile (
+                        "1: "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "movel %2@,%0@+; "
+                        "dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+}
+
+static inline void raw_outsl(volatile u32 __iomem *port, const u32 *buf,
+                             unsigned int nr)
+{
+        unsigned int tmp;
+
+        if (nr & 15) {
+                tmp = (nr & 15) - 1;
+                asm volatile (
+                        "1: movel %0@+,%2@; dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+        if (nr >> 4) {
+                tmp = (nr >> 4) - 1;
+                asm volatile (
+                        "1: "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "movel %0@+,%2@; "
+                        "dbra %1,1b"
+                        : "=a" (buf), "=d" (tmp)
+                        : "a" (port), "0" (buf),
+                          "1" (tmp));
+        }
+}
+
+
+static inline void raw_insw_swapw(volatile u16 __iomem *port, u16 *buf,
+                                  unsigned int nr)
+{
+    if ((nr) % 8)
+        __asm__ __volatile__
+               ("\tmovel %0,%/a0\n\t"
+                "movel %1,%/a1\n\t"
+                "movel %2,%/d6\n\t"
+                "subql #1,%/d6\n"
+                "1:\tmovew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "dbra %/d6,1b"
+                :
+                : "g" (port), "g" (buf), "g" (nr)
+                : "d0", "a0", "a1", "d6");
+    else
+        __asm__ __volatile__
+               ("movel %0,%/a0\n\t"
+                "movel %1,%/a1\n\t"
+                "movel %2,%/d6\n\t"
+                "lsrl  #3,%/d6\n\t"
+                "subql #1,%/d6\n"
+                "1:\tmovew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "movew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "movew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "movew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "movew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "movew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "movew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "movew %/a0@,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a1@+\n\t"
+                "dbra %/d6,1b"
+                :
+                : "g" (port), "g" (buf), "g" (nr)
+                : "d0", "a0", "a1", "d6");
+}
+
+static inline void raw_outsw_swapw(volatile u16 __iomem *port, const u16 *buf,
+                                   unsigned int nr)
+{
+    if ((nr) % 8)
+        __asm__ __volatile__
+               ("movel %0,%/a0\n\t"
+                "movel %1,%/a1\n\t"
+                "movel %2,%/d6\n\t"
+                "subql #1,%/d6\n"
+                "1:\tmovew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "dbra %/d6,1b"
+                :
+                : "g" (port), "g" (buf), "g" (nr)
+                : "d0", "a0", "a1", "d6");
+    else
+        __asm__ __volatile__
+               ("movel %0,%/a0\n\t"
+                "movel %1,%/a1\n\t"
+                "movel %2,%/d6\n\t"
+                "lsrl  #3,%/d6\n\t"
+                "subql #1,%/d6\n"
+                "1:\tmovew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "movew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "movew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "movew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "movew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "movew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "movew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "movew %/a1@+,%/d0\n\t"
+                "rolw  #8,%/d0\n\t"
+                "movew %/d0,%/a0@\n\t"
+                "dbra %/d6,1b"
+                :
+                : "g" (port), "g" (buf), "g" (nr)
+                : "d0", "a0", "a1", "d6");
+}
+
+#endif /* __KERNEL__ */
+
+#endif /* _RAW_IO_H */
diff --git a/arch/m68k/include/asm/resource.h b/arch/m68k/include/asm/resource.h
new file mode 100644
index 000000000000..e7d35019f337
--- /dev/null
+++ b/arch/m68k/include/asm/resource.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_RESOURCE_H
+#define _M68K_RESOURCE_H
+
+#include <asm-generic/resource.h>
+
+#endif /* _M68K_RESOURCE_H */
diff --git a/arch/m68k/include/asm/rtc.h b/arch/m68k/include/asm/rtc.h
new file mode 100644
index 000000000000..5d3e03859844
--- /dev/null
+++ b/arch/m68k/include/asm/rtc.h
@@ -0,0 +1,76 @@
+/* include/asm-m68k/rtc.h
+ *
+ * Copyright Richard Zidlicky
+ * implementation details for genrtc/q40rtc driver
+ */
+/* permission is hereby granted to copy, modify and redistribute this code
+ * in terms of the GNU Library General Public License, Version 2 or later,
+ * at your option.
+ */
+
+#ifndef _ASM_RTC_H
+#define _ASM_RTC_H
+
+#ifdef __KERNEL__
+
+#include <linux/rtc.h>
+#include <asm/errno.h>
+#include <asm/machdep.h>
+
+#define RTC_PIE 0x40            /* periodic interrupt enable */
+#define RTC_AIE 0x20            /* alarm interrupt enable */
+#define RTC_UIE 0x10            /* update-finished interrupt enable */
+
+/* some dummy definitions */
+#define RTC_BATT_BAD 0x100      /* battery bad */
+#define RTC_SQWE 0x08           /* enable square-wave output */
+#define RTC_DM_BINARY 0x04      /* all time/date values are BCD if clear */
+#define RTC_24H 0x02            /* 24 hour mode - else hours bit 7 means pm */
+#define RTC_DST_EN 0x01         /* auto switch DST - works f. USA only */
+
+static inline unsigned int get_rtc_time(struct rtc_time *time)
+{
+        /*
+         * Only the values that we read from the RTC are set. We leave
+         * tm_wday, tm_yday and tm_isdst untouched. Even though the
+         * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
+         * by the RTC when initially set to a non-zero value.
+         */
+        mach_hwclk(0, time);
+        return RTC_24H;
+}
+
+static inline int set_rtc_time(struct rtc_time *time)
+{
+        return mach_hwclk(1, time);
+}
+
+static inline unsigned int get_rtc_ss(void)
+{
+        if (mach_get_ss)
+                return mach_get_ss();
+        else{
+                struct rtc_time h;
+
+                get_rtc_time(&h);
+                return h.tm_sec;
+        }
+}
+
+static inline int get_rtc_pll(struct rtc_pll_info *pll)
+{
+        if (mach_get_rtc_pll)
+                return mach_get_rtc_pll(pll);
+        else
+                return -EINVAL;
+}
+static inline int set_rtc_pll(struct rtc_pll_info *pll)
+{
+        if (mach_set_rtc_pll)
+                return mach_set_rtc_pll(pll);
+        else
+                return -EINVAL;
+}
+#endif /* __KERNEL__ */
+
+#endif /* _ASM__RTC_H */
diff --git a/arch/m68k/include/asm/sbus.h b/arch/m68k/include/asm/sbus.h
new file mode 100644
index 000000000000..bfe3ba147f2e
--- /dev/null
+++ b/arch/m68k/include/asm/sbus.h
@@ -0,0 +1,45 @@
+/*
+ * some sbus structures and macros to make usage of sbus drivers possible
+ */
+
+#ifndef __M68K_SBUS_H
+#define __M68K_SBUS_H
+
+struct sbus_dev {
+        struct {
+                unsigned int which_io;
+                unsigned int phys_addr;
+        } reg_addrs[1];
+};
+
+/* sbus IO functions stolen from include/asm-sparc/io.h for the serial driver */
+/* No SBUS on the Sun3, kludge -- sam */
+
+static inline void _sbus_writeb(unsigned char val, unsigned long addr)
+{
+        *(volatile unsigned char *)addr = val;
+}
+
+static inline unsigned char _sbus_readb(unsigned long addr)
+{
+        return *(volatile unsigned char *)addr;
+}
+
+static inline void _sbus_writel(unsigned long val, unsigned long addr)
+{
+        *(volatile unsigned long *)addr = val;
+
+}
+
+extern inline unsigned long _sbus_readl(unsigned long addr)
+{
+        return *(volatile unsigned long *)addr;
+}
+
+
+#define sbus_readb(a) _sbus_readb((unsigned long)a)
+#define sbus_writeb(v, a) _sbus_writeb(v, (unsigned long)a)
+#define sbus_readl(a) _sbus_readl((unsigned long)a)
+#define sbus_writel(v, a) _sbus_writel(v, (unsigned long)a)
+
+#endif
diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h
new file mode 100644
index 000000000000..b7e528636252
--- /dev/null
+++ b/arch/m68k/include/asm/scatterlist.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "scatterlist_no.h"
+#else
+#include "scatterlist_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/scatterlist_mm.h b/arch/m68k/include/asm/scatterlist_mm.h
new file mode 100644
index 000000000000..d3a7a0edfeca
--- /dev/null
+++ b/arch/m68k/include/asm/scatterlist_mm.h
@@ -0,0 +1,23 @@
+#ifndef _M68K_SCATTERLIST_H
+#define _M68K_SCATTERLIST_H
+
+#include <linux/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long sg_magic;
+#endif
+        unsigned long page_link;
+        unsigned int offset;
+        unsigned int length;
+
+        __u32 dma_address;      /* A place to hang host-specific addresses at. */
+};
+
+/* This is bogus and should go away. */
+#define ISA_DMA_THRESHOLD (0x00ffffff)
+
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#endif /* !(_M68K_SCATTERLIST_H) */
diff --git a/arch/m68k/include/asm/scatterlist_no.h b/arch/m68k/include/asm/scatterlist_no.h
new file mode 100644
index 000000000000..afc4788b0d2c
--- /dev/null
+++ b/arch/m68k/include/asm/scatterlist_no.h
@@ -0,0 +1,22 @@
+#ifndef _M68KNOMMU_SCATTERLIST_H
+#define _M68KNOMMU_SCATTERLIST_H
+
+#include <linux/mm.h>
+#include <asm/types.h>
+
+struct scatterlist {
+#ifdef CONFIG_DEBUG_SG
+        unsigned long   sg_magic;
+#endif
+        unsigned long   page_link;
+        unsigned int    offset;
+        dma_addr_t      dma_address;
+        unsigned int    length;
+};
+
+#define sg_dma_address(sg)      ((sg)->dma_address)
+#define sg_dma_len(sg)          ((sg)->length)
+
+#define ISA_DMA_THRESHOLD       (0xffffffff)
+
+#endif /* !(_M68KNOMMU_SCATTERLIST_H) */
diff --git a/arch/m68k/include/asm/sections.h b/arch/m68k/include/asm/sections.h
new file mode 100644
index 000000000000..d64967ecfec6
--- /dev/null
+++ b/arch/m68k/include/asm/sections.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_SECTIONS_H
+#define _ASM_M68K_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+#endif /* _ASM_M68K_SECTIONS_H */
diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h
new file mode 100644
index 000000000000..82583bc004bd
--- /dev/null
+++ b/arch/m68k/include/asm/segment.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "segment_no.h"
+#else
+#include "segment_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/segment_mm.h b/arch/m68k/include/asm/segment_mm.h
new file mode 100644
index 000000000000..7b0b2d3127f9
--- /dev/null
+++ b/arch/m68k/include/asm/segment_mm.h
@@ -0,0 +1,57 @@
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE     (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+        unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+#define USER_DS         MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS       MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+        mm_segment_t _v;
+        __asm__ ("movec %/dfc,%0":"=r" (_v.seg):);
+
+        return _v;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+        __asm__ __volatile__ ("movec %0,%/sfc\n\t"
+                              "movec %0,%/dfc\n\t"
+                              : /* no outputs */ : "r" (val.seg) : "memory");
+}
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
diff --git a/arch/m68k/include/asm/segment_no.h b/arch/m68k/include/asm/segment_no.h
new file mode 100644
index 000000000000..42318ebec7ec
--- /dev/null
+++ b/arch/m68k/include/asm/segment_no.h
@@ -0,0 +1,51 @@
+#ifndef _M68K_SEGMENT_H
+#define _M68K_SEGMENT_H
+
+/* define constants */
+/* Address spaces (FC0-FC2) */
+#define USER_DATA     (1)
+#ifndef __USER_DS
+#define __USER_DS     (USER_DATA)
+#endif
+#define USER_PROGRAM  (2)
+#define SUPER_DATA    (5)
+#ifndef __KERNEL_DS
+#define __KERNEL_DS   (SUPER_DATA)
+#endif
+#define SUPER_PROGRAM (6)
+#define CPU_SPACE     (7)
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+        unsigned long seg;
+} mm_segment_t;
+
+#define MAKE_MM_SEG(s)  ((mm_segment_t) { (s) })
+#define USER_DS         MAKE_MM_SEG(__USER_DS)
+#define KERNEL_DS       MAKE_MM_SEG(__KERNEL_DS)
+
+/*
+ * Get/set the SFC/DFC registers for MOVES instructions
+ */
+
+static inline mm_segment_t get_fs(void)
+{
+    return USER_DS;
+}
+
+static inline mm_segment_t get_ds(void)
+{
+    /* return the supervisor data space code */
+    return KERNEL_DS;
+}
+
+static inline void set_fs(mm_segment_t val)
+{
+}
+
+#define segment_eq(a,b) ((a).seg == (b).seg)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_SEGMENT_H */
diff --git a/arch/m68k/include/asm/sembuf.h b/arch/m68k/include/asm/sembuf.h
new file mode 100644
index 000000000000..2308052a8c24
--- /dev/null
+++ b/arch/m68k/include/asm/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef _M68K_SEMBUF_H
+#define _M68K_SEMBUF_H
+
+/*
+ * The semid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+        struct ipc64_perm sem_perm;             /* permissions .. see ipc.h */
+        __kernel_time_t sem_otime;              /* last semop time */
+        unsigned long   __unused1;
+        __kernel_time_t sem_ctime;              /* last change time */
+        unsigned long   __unused2;
+        unsigned long   sem_nsems;              /* no. of semaphores in array */
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* _M68K_SEMBUF_H */
diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h
new file mode 100644
index 000000000000..2b90d6e69070
--- /dev/null
+++ b/arch/m68k/include/asm/serial.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-m68k/serial.h
+ *
+ * currently this seems useful only for a Q40,
+ * it's an almost exact copy of ../asm-alpha/serial.h
+ *
+ */
+
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ *
+ * It'd be nice if someone built a serial card with a 24.576 MHz
+ * clock, since the 16550A is capable of handling a top speed of 1.5
+ * megabits/second; but this requires the faster clock.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+/* Standard COM flags (except for COM4, because of the 8514 problem) */
+#ifdef CONFIG_SERIAL_DETECT_IRQ
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ)
+#define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ)
+#else
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+#define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF
+#endif
+
+#define SERIAL_PORT_DFNS                        \
+        /* UART CLK   PORT IRQ     FLAGS        */                      \
+        { 0, BASE_BAUD, 0x3F8, 4, STD_COM_FLAGS },      /* ttyS0 */     \
+        { 0, BASE_BAUD, 0x2F8, 3, STD_COM_FLAGS },      /* ttyS1 */     \
+        { 0, BASE_BAUD, 0x3E8, 4, STD_COM_FLAGS },      /* ttyS2 */     \
+        { 0, BASE_BAUD, 0x2E8, 3, STD_COM4_FLAGS },     /* ttyS3 */
diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h
new file mode 100644
index 000000000000..842f86f75ccd
--- /dev/null
+++ b/arch/m68k/include/asm/setup.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "setup_no.h"
+#else
+#include "setup_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/setup_mm.h b/arch/m68k/include/asm/setup_mm.h
new file mode 100644
index 000000000000..4dfb3952b375
--- /dev/null
+++ b/arch/m68k/include/asm/setup_mm.h
@@ -0,0 +1,376 @@
+/*
+** asm/setup.h -- Definition of the Linux/m68k setup information
+**
+** Copyright 1992 by Greg Harp
+**
+** This file is subject to the terms and conditions of the GNU General Public
+** License.  See the file COPYING in the main directory of this archive
+** for more details.
+**
+** Created 09/29/92 by Greg Harp
+**
+** 5/2/94 Roman Hodek:
+**   Added bi_atari part of the machine dependent union bi_un; for now it
+**   contains just a model field to distinguish between TT and Falcon.
+** 26/7/96 Roman Zippel:
+**   Renamed to setup.h; added some useful macros to allow gcc some
+**   optimizations if possible.
+** 5/10/96 Geert Uytterhoeven:
+**   Redesign of the boot information structure; moved boot information
+**   structure to bootinfo.h
+*/
+
+#ifndef _M68K_SETUP_H
+#define _M68K_SETUP_H
+
+
+
+    /*
+     *  Linux/m68k Architectures
+     */
+
+#define MACH_AMIGA    1
+#define MACH_ATARI    2
+#define MACH_MAC      3
+#define MACH_APOLLO   4
+#define MACH_SUN3     5
+#define MACH_MVME147  6
+#define MACH_MVME16x  7
+#define MACH_BVME6000 8
+#define MACH_HP300    9
+#define MACH_Q40     10
+#define MACH_SUN3X   11
+
+#define COMMAND_LINE_SIZE 256
+
+#ifdef __KERNEL__
+
+#define CL_SIZE COMMAND_LINE_SIZE
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_machtype;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_AMIGA)
+#  define MACH_IS_AMIGA (0)
+#elif defined(CONFIG_ATARI) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+        || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+        || defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_AMIGA (m68k_machtype == MACH_AMIGA)
+#else
+#  define MACH_AMIGA_ONLY
+#  define MACH_IS_AMIGA (1)
+#  define MACH_TYPE (MACH_AMIGA)
+#endif
+
+#if !defined(CONFIG_ATARI)
+#  define MACH_IS_ATARI (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_APOLLO) \
+        || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)               \
+        || defined(CONFIG_HP300) || defined(CONFIG_Q40)                      \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_ATARI (m68k_machtype == MACH_ATARI)
+#else
+#  define MACH_ATARI_ONLY
+#  define MACH_IS_ATARI (1)
+#  define MACH_TYPE (MACH_ATARI)
+#endif
+
+#if !defined(CONFIG_MAC)
+#  define MACH_IS_MAC (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_ATARI) || defined(CONFIG_APOLLO) \
+        || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)                 \
+        || defined(CONFIG_HP300) || defined(CONFIG_Q40)                        \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_MAC (m68k_machtype == MACH_MAC)
+#else
+#  define MACH_MAC_ONLY
+#  define MACH_IS_MAC (1)
+#  define MACH_TYPE (MACH_MAC)
+#endif
+
+#if defined(CONFIG_SUN3)
+#define MACH_IS_SUN3 (1)
+#define MACH_SUN3_ONLY (1)
+#define MACH_TYPE (MACH_SUN3)
+#else
+#define MACH_IS_SUN3 (0)
+#endif
+
+#if !defined (CONFIG_APOLLO)
+#  define MACH_IS_APOLLO (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+        || defined(CONFIG_MVME16x) || defined(CONFIG_BVME6000)              \
+        || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_APOLLO (m68k_machtype == MACH_APOLLO)
+#else
+#  define MACH_APOLLO_ONLY
+#  define MACH_IS_APOLLO (1)
+#  define MACH_TYPE (MACH_APOLLO)
+#endif
+
+#if !defined (CONFIG_MVME147)
+#  define MACH_IS_MVME147 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+        || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+        || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME16x)
+#  define MACH_IS_MVME147 (m68k_machtype == MACH_MVME147)
+#else
+#  define MACH_MVME147_ONLY
+#  define MACH_IS_MVME147 (1)
+#  define MACH_TYPE (MACH_MVME147)
+#endif
+
+#if !defined (CONFIG_MVME16x)
+#  define MACH_IS_MVME16x (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+        || defined(CONFIG_APOLLO) || defined(CONFIG_BVME6000)               \
+        || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_MVME16x (m68k_machtype == MACH_MVME16x)
+#else
+#  define MACH_MVME16x_ONLY
+#  define MACH_IS_MVME16x (1)
+#  define MACH_TYPE (MACH_MVME16x)
+#endif
+
+#if !defined (CONFIG_BVME6000)
+#  define MACH_IS_BVME6000 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+        || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+        || defined(CONFIG_HP300) || defined(CONFIG_Q40)                     \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_BVME6000 (m68k_machtype == MACH_BVME6000)
+#else
+#  define MACH_BVME6000_ONLY
+#  define MACH_IS_BVME6000 (1)
+#  define MACH_TYPE (MACH_BVME6000)
+#endif
+
+#if !defined (CONFIG_HP300)
+#  define MACH_IS_HP300 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+        || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x) \
+        || defined(CONFIG_BVME6000) || defined(CONFIG_Q40) \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_HP300 (m68k_machtype == MACH_HP300)
+#else
+#  define MACH_HP300_ONLY
+#  define MACH_IS_HP300 (1)
+#  define MACH_TYPE (MACH_HP300)
+#endif
+
+#if !defined (CONFIG_Q40)
+#  define MACH_IS_Q40 (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+        || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+        || defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+        || defined(CONFIG_SUN3X) || defined(CONFIG_MVME147)
+#  define MACH_IS_Q40 (m68k_machtype == MACH_Q40)
+#else
+#  define MACH_Q40_ONLY
+#  define MACH_IS_Q40 (1)
+#  define MACH_TYPE (MACH_Q40)
+#endif
+
+#if !defined (CONFIG_SUN3X)
+#  define MACH_IS_SUN3X (0)
+#elif defined(CONFIG_AMIGA) || defined(CONFIG_MAC) || defined(CONFIG_ATARI) \
+        || defined(CONFIG_APOLLO) || defined(CONFIG_MVME16x)                \
+        || defined(CONFIG_BVME6000) || defined(CONFIG_HP300)                \
+        || defined(CONFIG_Q40) || defined(CONFIG_MVME147)
+#  define MACH_IS_SUN3X (m68k_machtype == MACH_SUN3X)
+#else
+#  define CONFIG_SUN3X_ONLY
+#  define MACH_IS_SUN3X (1)
+#  define MACH_TYPE (MACH_SUN3X)
+#endif
+
+#ifndef MACH_TYPE
+#  define MACH_TYPE (m68k_machtype)
+#endif
+
+#endif /* __KERNEL__ */
+
+
+    /*
+     *  CPU, FPU and MMU types
+     *
+     *  Note: we may rely on the following equalities:
+     *
+     *      CPU_68020 == MMU_68851
+     *      CPU_68030 == MMU_68030
+     *      CPU_68040 == FPU_68040 == MMU_68040
+     *      CPU_68060 == FPU_68060 == MMU_68060
+     */
+
+#define CPUB_68020     0
+#define CPUB_68030     1
+#define CPUB_68040     2
+#define CPUB_68060     3
+
+#define CPU_68020      (1<<CPUB_68020)
+#define CPU_68030      (1<<CPUB_68030)
+#define CPU_68040      (1<<CPUB_68040)
+#define CPU_68060      (1<<CPUB_68060)
+
+#define FPUB_68881     0
+#define FPUB_68882     1
+#define FPUB_68040     2                       /* Internal FPU */
+#define FPUB_68060     3                       /* Internal FPU */
+#define FPUB_SUNFPA    4                       /* Sun-3 FPA */
+
+#define FPU_68881      (1<<FPUB_68881)
+#define FPU_68882      (1<<FPUB_68882)
+#define FPU_68040      (1<<FPUB_68040)
+#define FPU_68060      (1<<FPUB_68060)
+#define FPU_SUNFPA     (1<<FPUB_SUNFPA)
+
+#define MMUB_68851     0
+#define MMUB_68030     1                       /* Internal MMU */
+#define MMUB_68040     2                       /* Internal MMU */
+#define MMUB_68060     3                       /* Internal MMU */
+#define MMUB_APOLLO    4                       /* Custom Apollo */
+#define MMUB_SUN3      5                       /* Custom Sun-3 */
+
+#define MMU_68851      (1<<MMUB_68851)
+#define MMU_68030      (1<<MMUB_68030)
+#define MMU_68040      (1<<MMUB_68040)
+#define MMU_68060      (1<<MMUB_68060)
+#define MMU_SUN3       (1<<MMUB_SUN3)
+#define MMU_APOLLO     (1<<MMUB_APOLLO)
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+extern unsigned long m68k_cputype;
+extern unsigned long m68k_fputype;
+extern unsigned long m68k_mmutype;
+#ifdef CONFIG_VME
+extern unsigned long vme_brdtype;
+#endif
+
+    /*
+     *  m68k_is040or060 is != 0 for a '040 or higher;
+     *  used numbers are 4 for 68040 and 6 for 68060.
+     */
+
+extern int m68k_is040or060;
+#endif /* !__ASSEMBLY__ */
+
+#if !defined(CONFIG_M68020)
+#  define CPU_IS_020 (0)
+#  define MMU_IS_851 (0)
+#  define MMU_IS_SUN3 (0)
+#elif defined(CONFIG_M68030) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#  define CPU_IS_020 (m68k_cputype & CPU_68020)
+#  define MMU_IS_851 (m68k_mmutype & MMU_68851)
+#  define MMU_IS_SUN3 (0)       /* Sun3 not supported with other CPU enabled */
+#else
+#  define CPU_M68020_ONLY
+#  define CPU_IS_020 (1)
+#ifdef MACH_SUN3_ONLY
+#  define MMU_IS_SUN3 (1)
+#  define MMU_IS_851 (0)
+#else
+#  define MMU_IS_SUN3 (0)
+#  define MMU_IS_851 (1)
+#endif
+#endif
+
+#if !defined(CONFIG_M68030)
+#  define CPU_IS_030 (0)
+#  define MMU_IS_030 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#  define CPU_IS_030 (m68k_cputype & CPU_68030)
+#  define MMU_IS_030 (m68k_mmutype & MMU_68030)
+#else
+#  define CPU_M68030_ONLY
+#  define CPU_IS_030 (1)
+#  define MMU_IS_030 (1)
+#endif
+
+#if !defined(CONFIG_M68040)
+#  define CPU_IS_040 (0)
+#  define MMU_IS_040 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68060)
+#  define CPU_IS_040 (m68k_cputype & CPU_68040)
+#  define MMU_IS_040 (m68k_mmutype & MMU_68040)
+#else
+#  define CPU_M68040_ONLY
+#  define CPU_IS_040 (1)
+#  define MMU_IS_040 (1)
+#endif
+
+#if !defined(CONFIG_M68060)
+#  define CPU_IS_060 (0)
+#  define MMU_IS_060 (0)
+#elif defined(CONFIG_M68020) || defined(CONFIG_M68030) || defined(CONFIG_M68040)
+#  define CPU_IS_060 (m68k_cputype & CPU_68060)
+#  define MMU_IS_060 (m68k_mmutype & MMU_68060)
+#else
+#  define CPU_M68060_ONLY
+#  define CPU_IS_060 (1)
+#  define MMU_IS_060 (1)
+#endif
+
+#if !defined(CONFIG_M68020) && !defined(CONFIG_M68030)
+#  define CPU_IS_020_OR_030 (0)
+#else
+#  define CPU_M68020_OR_M68030
+#  if defined(CONFIG_M68040) || defined(CONFIG_M68060)
+#    define CPU_IS_020_OR_030 (!m68k_is040or060)
+#  else
+#    define CPU_M68020_OR_M68030_ONLY
+#    define CPU_IS_020_OR_030 (1)
+#  endif
+#endif
+
+#if !defined(CONFIG_M68040) && !defined(CONFIG_M68060)
+#  define CPU_IS_040_OR_060 (0)
+#else
+#  define CPU_M68040_OR_M68060
+#  if defined(CONFIG_M68020) || defined(CONFIG_M68030)
+#    define CPU_IS_040_OR_060 (m68k_is040or060)
+#  else
+#    define CPU_M68040_OR_M68060_ONLY
+#    define CPU_IS_040_OR_060 (1)
+#  endif
+#endif
+
+#define CPU_TYPE (m68k_cputype)
+
+#ifdef CONFIG_M68KFPU_EMU
+#  ifdef CONFIG_M68KFPU_EMU_ONLY
+#    define FPU_IS_EMU (1)
+#  else
+#    define FPU_IS_EMU (!m68k_fputype)
+#  endif
+#else
+#  define FPU_IS_EMU (0)
+#endif
+
+
+    /*
+     *  Miscellaneous
+     */
+
+#define NUM_MEMINFO     4
+
+#ifndef __ASSEMBLY__
+struct mem_info {
+        unsigned long addr;             /* physical address of memory chunk */
+        unsigned long size;             /* length of memory chunk (in bytes) */
+};
+
+extern int m68k_num_memory;             /* # of memory blocks found (and used) */
+extern int m68k_realnum_memory;         /* real # of memory blocks found */
+extern struct mem_info m68k_memory[NUM_MEMINFO];/* memory description */
+#endif
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SETUP_H */
diff --git a/arch/m68k/include/asm/setup_no.h b/arch/m68k/include/asm/setup_no.h
new file mode 100644
index 000000000000..45d286ce9398
--- /dev/null
+++ b/arch/m68k/include/asm/setup_no.h
@@ -0,0 +1,10 @@
+#ifdef __KERNEL__
+
+#include <asm/setup_mm.h>
+
+/* We have a bigger command line buffer. */
+#undef COMMAND_LINE_SIZE
+
+#endif  /*  __KERNEL__  */
+
+#define COMMAND_LINE_SIZE       512
diff --git a/arch/m68k/include/asm/shm.h b/arch/m68k/include/asm/shm.h
new file mode 100644
index 000000000000..fa56ec84a126
--- /dev/null
+++ b/arch/m68k/include/asm/shm.h
@@ -0,0 +1,31 @@
+#ifndef _M68K_SHM_H
+#define _M68K_SHM_H
+
+
+/* format of page table entries that correspond to shared memory pages
+   currently out in swap space (see also mm/swap.c):
+   bits 0-1 (PAGE_PRESENT) is  = 0
+   bits 8..2 (SWP_TYPE) are = SHM_SWP_TYPE
+   bits 31..9 are used like this:
+   bits 15..9 (SHM_ID) the id of the shared memory segment
+   bits 30..16 (SHM_IDX) the index of the page within the shared memory segment
+                    (actually only bits 25..16 get used since SHMMAX is so low)
+   bit 31 (SHM_READ_ONLY) flag whether the page belongs to a read-only attach
+*/
+/* on the m68k both bits 0 and 1 must be zero */
+/* format on the sun3 is similar, but bits 30, 31 are set to zero and all
+   others are reduced by 2. --m */
+
+#ifndef CONFIG_SUN3
+#define SHM_ID_SHIFT    9
+#else
+#define SHM_ID_SHIFT    7
+#endif
+#define _SHM_ID_BITS    7
+#define SHM_ID_MASK     ((1<<_SHM_ID_BITS)-1)
+
+#define SHM_IDX_SHIFT   (SHM_ID_SHIFT+_SHM_ID_BITS)
+#define _SHM_IDX_BITS   15
+#define SHM_IDX_MASK    ((1<<_SHM_IDX_BITS)-1)
+
+#endif /* _M68K_SHM_H */
diff --git a/arch/m68k/include/asm/shmbuf.h b/arch/m68k/include/asm/shmbuf.h
new file mode 100644
index 000000000000..f8928d62f1b7
--- /dev/null
+++ b/arch/m68k/include/asm/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef _M68K_SHMBUF_H
+#define _M68K_SHMBUF_H
+
+/*
+ * The shmid64_ds structure for m68k architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+        struct ipc64_perm       shm_perm;       /* operation perms */
+        size_t                  shm_segsz;      /* size of segment (bytes) */
+        __kernel_time_t         shm_atime;      /* last attach time */
+        unsigned long           __unused1;
+        __kernel_time_t         shm_dtime;      /* last detach time */
+        unsigned long           __unused2;
+        __kernel_time_t         shm_ctime;      /* last change time */
+        unsigned long           __unused3;
+        __kernel_pid_t          shm_cpid;       /* pid of creator */
+        __kernel_pid_t          shm_lpid;       /* pid of last operator */
+        unsigned long           shm_nattch;     /* no. of current attaches */
+        unsigned long           __unused4;
+        unsigned long           __unused5;
+};
+
+struct shminfo64 {
+        unsigned long   shmmax;
+        unsigned long   shmmin;
+        unsigned long   shmmni;
+        unsigned long   shmseg;
+        unsigned long   shmall;
+        unsigned long   __unused1;
+        unsigned long   __unused2;
+        unsigned long   __unused3;
+        unsigned long   __unused4;
+};
+
+#endif /* _M68K_SHMBUF_H */
diff --git a/arch/m68k/include/asm/shmparam.h b/arch/m68k/include/asm/shmparam.h
new file mode 100644
index 000000000000..558892a2efb3
--- /dev/null
+++ b/arch/m68k/include/asm/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_SHMPARAM_H
+#define _M68K_SHMPARAM_H
+
+#define SHMLBA PAGE_SIZE                 /* attach addr a multiple of this */
+
+#endif /* _M68K_SHMPARAM_H */
diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h
new file mode 100644
index 000000000000..bff6d40345a9
--- /dev/null
+++ b/arch/m68k/include/asm/sigcontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "sigcontext_no.h"
+#else
+#include "sigcontext_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/sigcontext_mm.h b/arch/m68k/include/asm/sigcontext_mm.h
new file mode 100644
index 000000000000..64fbe34cf26f
--- /dev/null
+++ b/arch/m68k/include/asm/sigcontext_mm.h
@@ -0,0 +1,19 @@
+#ifndef _ASM_M68k_SIGCONTEXT_H
+#define _ASM_M68k_SIGCONTEXT_H
+
+struct sigcontext {
+        unsigned long  sc_mask;         /* old sigmask */
+        unsigned long  sc_usp;          /* old user stack pointer */
+        unsigned long  sc_d0;
+        unsigned long  sc_d1;
+        unsigned long  sc_a0;
+        unsigned long  sc_a1;
+        unsigned short sc_sr;
+        unsigned long  sc_pc;
+        unsigned short sc_formatvec;
+        unsigned long  sc_fpregs[2*3];  /* room for two fp registers */
+        unsigned long  sc_fpcntl[3];
+        unsigned char  sc_fpstate[216];
+};
+
+#endif
diff --git a/arch/m68k/include/asm/sigcontext_no.h b/arch/m68k/include/asm/sigcontext_no.h
new file mode 100644
index 000000000000..36c293fc133d
--- /dev/null
+++ b/arch/m68k/include/asm/sigcontext_no.h
@@ -0,0 +1,17 @@
+#ifndef _ASM_M68KNOMMU_SIGCONTEXT_H
+#define _ASM_M68KNOMMU_SIGCONTEXT_H
+
+struct sigcontext {
+        unsigned long  sc_mask;         /* old sigmask */
+        unsigned long  sc_usp;          /* old user stack pointer */
+        unsigned long  sc_d0;
+        unsigned long  sc_d1;
+        unsigned long  sc_a0;
+        unsigned long  sc_a1;
+        unsigned long  sc_a5;
+        unsigned short sc_sr;
+        unsigned long  sc_pc;
+        unsigned short sc_formatvec;
+};
+
+#endif
diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h
new file mode 100644
index 000000000000..61219d7affc8
--- /dev/null
+++ b/arch/m68k/include/asm/siginfo.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "siginfo_no.h"
+#else
+#include "siginfo_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/siginfo_mm.h b/arch/m68k/include/asm/siginfo_mm.h
new file mode 100644
index 000000000000..05a8d6d90b58
--- /dev/null
+++ b/arch/m68k/include/asm/siginfo_mm.h
@@ -0,0 +1,92 @@
+#ifndef _M68K_SIGINFO_H
+#define _M68K_SIGINFO_H
+
+#define HAVE_ARCH_SIGINFO_T
+#define HAVE_ARCH_COPY_SIGINFO
+
+#include <asm-generic/siginfo.h>
+
+typedef struct siginfo {
+        int si_signo;
+        int si_errno;
+        int si_code;
+
+        union {
+                int _pad[SI_PAD_SIZE];
+
+                /* kill() */
+                struct {
+                        __kernel_pid_t _pid;    /* sender's pid */
+                        __kernel_uid_t _uid;    /* backwards compatibility */
+                        __kernel_uid32_t _uid32; /* sender's uid */
+                } _kill;
+
+                /* POSIX.1b timers */
+                struct {
+                        timer_t _tid;           /* timer id */
+                        int _overrun;           /* overrun count */
+                        char _pad[sizeof( __ARCH_SI_UID_T) - sizeof(int)];
+                        sigval_t _sigval;       /* same as below */
+                        int _sys_private;       /* not to be passed to user */
+                } _timer;
+
+                /* POSIX.1b signals */
+                struct {
+                        __kernel_pid_t _pid;    /* sender's pid */
+                        __kernel_uid_t _uid;    /* backwards compatibility */
+                        sigval_t _sigval;
+                        __kernel_uid32_t _uid32; /* sender's uid */
+                } _rt;
+
+                /* SIGCHLD */
+                struct {
+                        __kernel_pid_t _pid;    /* which child */
+                        __kernel_uid_t _uid;    /* backwards compatibility */
+                        int _status;            /* exit code */
+                        clock_t _utime;
+                        clock_t _stime;
+                        __kernel_uid32_t _uid32; /* sender's uid */
+                } _sigchld;
+
+                /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */
+                struct {
+                        void *_addr; /* faulting insn/memory ref. */
+                } _sigfault;
+
+                /* SIGPOLL */
+                struct {
+                        int _band;      /* POLL_IN, POLL_OUT, POLL_MSG */
+                        int _fd;
+                } _sigpoll;
+        } _sifields;
+} siginfo_t;
+
+#define UID16_SIGINFO_COMPAT_NEEDED
+
+/*
+ * How these fields are to be accessed.
+ */
+#undef si_uid
+#ifdef __KERNEL__
+#define si_uid          _sifields._kill._uid32
+#define si_uid16        _sifields._kill._uid
+#else
+#define si_uid          _sifields._kill._uid
+#endif
+
+#ifdef __KERNEL__
+
+#include <linux/string.h>
+
+static inline void copy_siginfo(struct siginfo *to, struct siginfo *from)
+{
+        if (from->si_code < 0)
+                memcpy(to, from, sizeof(*to));
+        else
+                /* _sigchld is currently the largest know union member */
+                memcpy(to, from, 3*sizeof(int) + sizeof(from->_sifields._sigchld));
+}
+
+#endif /* __KERNEL__ */
+
+#endif
diff --git a/arch/m68k/include/asm/siginfo_no.h b/arch/m68k/include/asm/siginfo_no.h
new file mode 100644
index 000000000000..b18e5f4064ae
--- /dev/null
+++ b/arch/m68k/include/asm/siginfo_no.h
@@ -0,0 +1,6 @@
+#ifndef _M68KNOMMU_SIGINFO_H
+#define _M68KNOMMU_SIGINFO_H
+
+#include <asm-generic/siginfo.h>
+
+#endif
diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h
new file mode 100644
index 000000000000..3c19988bd93c
--- /dev/null
+++ b/arch/m68k/include/asm/signal.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "signal_no.h"
+#else
+#include "signal_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/signal_mm.h b/arch/m68k/include/asm/signal_mm.h
new file mode 100644
index 000000000000..3db8a81942f1
--- /dev/null
+++ b/arch/m68k/include/asm/signal_mm.h
@@ -0,0 +1,206 @@
+#ifndef _M68K_SIGNAL_H
+#define _M68K_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG           64
+#define _NSIG_BPW       32
+#define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+
+typedef struct {
+        unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG            32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS          31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001
+#define SA_NOCLDWAIT    0x00000002
+#define SA_SIGINFO      0x00000004
+#define SA_ONSTACK      0x08000000
+#define SA_RESTART      0x10000000
+#define SA_NODEFER      0x40000000
+#define SA_RESETHAND    0x80000000
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+
+/*
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        __sigrestore_t sa_restorer;
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void __user *ss_sp;
+        int ss_flags;
+        size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+#include <asm/sigcontext.h>
+
+#define __HAVE_ARCH_SIG_BITOPS
+
+static inline void sigaddset(sigset_t *set, int _sig)
+{
+        asm ("bfset %0{%1,#1}"
+                : "+od" (*set)
+                : "id" ((_sig - 1) ^ 31)
+                : "cc");
+}
+
+static inline void sigdelset(sigset_t *set, int _sig)
+{
+        asm ("bfclr %0{%1,#1}"
+                : "+od" (*set)
+                : "id" ((_sig - 1) ^ 31)
+                : "cc");
+}
+
+static inline int __const_sigismember(sigset_t *set, int _sig)
+{
+        unsigned long sig = _sig - 1;
+        return 1 & (set->sig[sig / _NSIG_BPW] >> (sig % _NSIG_BPW));
+}
+
+static inline int __gen_sigismember(sigset_t *set, int _sig)
+{
+        int ret;
+        asm ("bfextu %1{%2,#1},%0"
+                : "=d" (ret)
+                : "od" (*set), "id" ((_sig-1) ^ 31)
+                : "cc");
+        return ret;
+}
+
+#define sigismember(set,sig)                    \
+        (__builtin_constant_p(sig) ?            \
+         __const_sigismember(set,sig) :         \
+         __gen_sigismember(set,sig))
+
+static inline int sigfindinword(unsigned long word)
+{
+        asm ("bfffo %1{#0,#0},%0"
+                : "=d" (word)
+                : "d" (word & -word)
+                : "cc");
+        return word ^ 31;
+}
+
+struct pt_regs;
+extern void ptrace_signal_deliver(struct pt_regs *regs, void *cookie);
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SIGNAL_H */
diff --git a/arch/m68k/include/asm/signal_no.h b/arch/m68k/include/asm/signal_no.h
new file mode 100644
index 000000000000..216c08be54a0
--- /dev/null
+++ b/arch/m68k/include/asm/signal_no.h
@@ -0,0 +1,159 @@
+#ifndef _M68KNOMMU_SIGNAL_H
+#define _M68KNOMMU_SIGNAL_H
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+#ifdef __KERNEL__
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+
+#define _NSIG           64
+#define _NSIG_BPW       32
+#define _NSIG_WORDS     (_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;             /* at least 32 bits */
+
+typedef struct {
+        unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG            32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+#define SIGHUP           1
+#define SIGINT           2
+#define SIGQUIT          3
+#define SIGILL           4
+#define SIGTRAP          5
+#define SIGABRT          6
+#define SIGIOT           6
+#define SIGBUS           7
+#define SIGFPE           8
+#define SIGKILL          9
+#define SIGUSR1         10
+#define SIGSEGV         11
+#define SIGUSR2         12
+#define SIGPIPE         13
+#define SIGALRM         14
+#define SIGTERM         15
+#define SIGSTKFLT       16
+#define SIGCHLD         17
+#define SIGCONT         18
+#define SIGSTOP         19
+#define SIGTSTP         20
+#define SIGTTIN         21
+#define SIGTTOU         22
+#define SIGURG          23
+#define SIGXCPU         24
+#define SIGXFSZ         25
+#define SIGVTALRM       26
+#define SIGPROF         27
+#define SIGWINCH        28
+#define SIGIO           29
+#define SIGPOLL         SIGIO
+/*
+#define SIGLOST         29
+*/
+#define SIGPWR          30
+#define SIGSYS          31
+#define SIGUNUSED       31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN        32
+#define SIGRTMAX        _NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP    0x00000001
+#define SA_NOCLDWAIT    0x00000002
+#define SA_SIGINFO      0x00000004
+#define SA_ONSTACK      0x08000000
+#define SA_RESTART      0x10000000
+#define SA_NODEFER      0x40000000
+#define SA_RESETHAND    0x80000000
+
+#define SA_NOMASK       SA_NODEFER
+#define SA_ONESHOT      SA_RESETHAND
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK      1
+#define SS_DISABLE      2
+
+#define MINSIGSTKSZ     2048
+#define SIGSTKSZ        8192
+
+#include <asm-generic/signal.h>
+
+#ifdef __KERNEL__
+struct old_sigaction {
+        __sighandler_t sa_handler;
+        old_sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+struct sigaction {
+        __sighandler_t sa_handler;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+        sigset_t sa_mask;               /* mask last for extensibility */
+};
+
+struct k_sigaction {
+        struct sigaction sa;
+};
+#else
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+        union {
+          __sighandler_t _sa_handler;
+          void (*_sa_sigaction)(int, struct siginfo *, void *);
+        } _u;
+        sigset_t sa_mask;
+        unsigned long sa_flags;
+        void (*sa_restorer)(void);
+};
+
+#define sa_handler      _u._sa_handler
+#define sa_sigaction    _u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+typedef struct sigaltstack {
+        void *ss_sp;
+        int ss_flags;
+        size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68KNOMMU_SIGNAL_H */
diff --git a/arch/m68k/include/asm/smp.h b/arch/m68k/include/asm/smp.h
new file mode 100644
index 000000000000..9e9bd7e58922
--- /dev/null
+++ b/arch/m68k/include/asm/smp.h
@@ -0,0 +1 @@
+/* nothing required here yet */
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
new file mode 100644
index 000000000000..dbc64e92c41a
--- /dev/null
+++ b/arch/m68k/include/asm/socket.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_SOCKET_H
+#define _ASM_SOCKET_H
+
+#include <asm/sockios.h>
+
+/* For setsockopt(2) */
+#define SOL_SOCKET      1
+
+#define SO_DEBUG        1
+#define SO_REUSEADDR    2
+#define SO_TYPE         3
+#define SO_ERROR        4
+#define SO_DONTROUTE    5
+#define SO_BROADCAST    6
+#define SO_SNDBUF       7
+#define SO_RCVBUF       8
+#define SO_SNDBUFFORCE  32
+#define SO_RCVBUFFORCE  33
+#define SO_KEEPALIVE    9
+#define SO_OOBINLINE    10
+#define SO_NO_CHECK     11
+#define SO_PRIORITY     12
+#define SO_LINGER       13
+#define SO_BSDCOMPAT    14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED     16
+#define SO_PEERCRED     17
+#define SO_RCVLOWAT     18
+#define SO_SNDLOWAT     19
+#define SO_RCVTIMEO     20
+#define SO_SNDTIMEO     21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION              22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT        23
+#define SO_SECURITY_ENCRYPTION_NETWORK          24
+
+#define SO_BINDTODEVICE 25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP            29
+#define SCM_TIMESTAMP           SO_TIMESTAMP
+
+#define SO_ACCEPTCONN           30
+
+#define SO_PEERSEC             31
+#define SO_PASSSEC              34
+#define SO_TIMESTAMPNS          35
+#define SCM_TIMESTAMPNS         SO_TIMESTAMPNS
+
+#define SO_MARK                 36
+
+#endif /* _ASM_SOCKET_H */
diff --git a/arch/m68k/include/asm/sockios.h b/arch/m68k/include/asm/sockios.h
new file mode 100644
index 000000000000..c04a23943cb7
--- /dev/null
+++ b/arch/m68k/include/asm/sockios.h
@@ -0,0 +1,13 @@
+#ifndef __ARCH_M68K_SOCKIOS__
+#define __ARCH_M68K_SOCKIOS__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN       0x8901
+#define SIOCSPGRP       0x8902
+#define FIOGETOWN       0x8903
+#define SIOCGPGRP       0x8904
+#define SIOCATMARK      0x8905
+#define SIOCGSTAMP      0x8906          /* Get stamp (timeval) */
+#define SIOCGSTAMPNS    0x8907          /* Get stamp (timespec) */
+
+#endif /* __ARCH_M68K_SOCKIOS__ */
diff --git a/arch/m68k/include/asm/spinlock.h b/arch/m68k/include/asm/spinlock.h
new file mode 100644
index 000000000000..20f46e27b534
--- /dev/null
+++ b/arch/m68k/include/asm/spinlock.h
@@ -0,0 +1,6 @@
+#ifndef __M68K_SPINLOCK_H
+#define __M68K_SPINLOCK_H
+
+#error "m68k doesn't do SMP yet"
+
+#endif
diff --git a/arch/m68k/include/asm/stat.h b/arch/m68k/include/asm/stat.h
new file mode 100644
index 000000000000..dd38bc2e9f98
--- /dev/null
+++ b/arch/m68k/include/asm/stat.h
@@ -0,0 +1,77 @@
+#ifndef _M68K_STAT_H
+#define _M68K_STAT_H
+
+struct __old_kernel_stat {
+        unsigned short st_dev;
+        unsigned short st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned long  st_size;
+        unsigned long  st_atime;
+        unsigned long  st_mtime;
+        unsigned long  st_ctime;
+};
+
+struct stat {
+        unsigned short st_dev;
+        unsigned short __pad1;
+        unsigned long  st_ino;
+        unsigned short st_mode;
+        unsigned short st_nlink;
+        unsigned short st_uid;
+        unsigned short st_gid;
+        unsigned short st_rdev;
+        unsigned short __pad2;
+        unsigned long  st_size;
+        unsigned long  st_blksize;
+        unsigned long  st_blocks;
+        unsigned long  st_atime;
+        unsigned long  __unused1;
+        unsigned long  st_mtime;
+        unsigned long  __unused2;
+        unsigned long  st_ctime;
+        unsigned long  __unused3;
+        unsigned long  __unused4;
+        unsigned long  __unused5;
+};
+
+/* This matches struct stat64 in glibc2.1, hence the absolutely
+ * insane amounts of padding around dev_t's.
+ */
+struct stat64 {
+        unsigned long long      st_dev;
+        unsigned char   __pad1[2];
+
+#define STAT64_HAS_BROKEN_ST_INO        1
+        unsigned long   __st_ino;
+
+        unsigned int    st_mode;
+        unsigned int    st_nlink;
+
+        unsigned long   st_uid;
+        unsigned long   st_gid;
+
+        unsigned long long      st_rdev;
+        unsigned char   __pad3[2];
+
+        long long       st_size;
+        unsigned long   st_blksize;
+
+        unsigned long long      st_blocks;      /* Number 512-byte blocks allocated. */
+
+        unsigned long   st_atime;
+        unsigned long   st_atime_nsec;
+
+        unsigned long   st_mtime;
+        unsigned long   st_mtime_nsec;
+
+        unsigned long   st_ctime;
+        unsigned long   st_ctime_nsec;
+
+        unsigned long long      st_ino;
+};
+
+#endif /* _M68K_STAT_H */
diff --git a/arch/m68k/include/asm/statfs.h b/arch/m68k/include/asm/statfs.h
new file mode 100644
index 000000000000..08d93f14e061
--- /dev/null
+++ b/arch/m68k/include/asm/statfs.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_STATFS_H
+#define _M68K_STATFS_H
+
+#include <asm-generic/statfs.h>
+
+#endif /* _M68K_STATFS_H */
diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h
new file mode 100644
index 000000000000..2c356f90f171
--- /dev/null
+++ b/arch/m68k/include/asm/string.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "string_no.h"
+#else
+#include "string_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/string_mm.h b/arch/m68k/include/asm/string_mm.h
new file mode 100644
index 000000000000..2eb7df1e0f5d
--- /dev/null
+++ b/arch/m68k/include/asm/string_mm.h
@@ -0,0 +1,131 @@
+#ifndef _M68K_STRING_H_
+#define _M68K_STRING_H_
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+
+static inline size_t __kernel_strlen(const char *s)
+{
+        const char *sc;
+
+        for (sc = s; *sc++; )
+                ;
+        return sc - s - 1;
+}
+
+static inline char *__kernel_strcpy(char *dest, const char *src)
+{
+        char *xdest = dest;
+
+        asm volatile ("\n"
+                "1:     move.b  (%1)+,(%0)+\n"
+                "       jne     1b"
+                : "+a" (dest), "+a" (src)
+                : : "memory");
+        return xdest;
+}
+
+#ifndef __IN_STRING_C
+
+#define __HAVE_ARCH_STRLEN
+#define strlen(s)       (__builtin_constant_p(s) ?      \
+                         __builtin_strlen(s) :          \
+                         __kernel_strlen(s))
+
+#define __HAVE_ARCH_STRNLEN
+static inline size_t strnlen(const char *s, size_t count)
+{
+        const char *sc = s;
+
+        asm volatile ("\n"
+                "1:     subq.l  #1,%1\n"
+                "       jcs     2f\n"
+                "       tst.b   (%0)+\n"
+                "       jne     1b\n"
+                "       subq.l  #1,%0\n"
+                "2:"
+                : "+a" (sc), "+d" (count));
+        return sc - s;
+}
+
+#define __HAVE_ARCH_STRCPY
+#if __GNUC__ >= 4
+#define strcpy(d, s)    (__builtin_constant_p(s) &&     \
+                         __builtin_strlen(s) <= 32 ?    \
+                         __builtin_strcpy(d, s) :       \
+                         __kernel_strcpy(d, s))
+#else
+#define strcpy(d, s)    __kernel_strcpy(d, s)
+#endif
+
+#define __HAVE_ARCH_STRNCPY
+static inline char *strncpy(char *dest, const char *src, size_t n)
+{
+        char *xdest = dest;
+
+        asm volatile ("\n"
+                "       jra     2f\n"
+                "1:     move.b  (%1),(%0)+\n"
+                "       jeq     2f\n"
+                "       addq.l  #1,%1\n"
+                "2:     subq.l  #1,%2\n"
+                "       jcc     1b\n"
+                : "+a" (dest), "+a" (src), "+d" (n)
+                : : "memory");
+        return xdest;
+}
+
+#define __HAVE_ARCH_STRCAT
+#define strcat(d, s)    ({                      \
+        char *__d = (d);                        \
+        strcpy(__d + strlen(__d), (s));         \
+})
+
+#define __HAVE_ARCH_STRCHR
+static inline char *strchr(const char *s, int c)
+{
+        char sc, ch = c;
+
+        for (; (sc = *s++) != ch; ) {
+                if (!sc)
+                        return NULL;
+        }
+        return (char *)s - 1;
+}
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char *cs, const char *ct)
+{
+        char res;
+
+        asm ("\n"
+                "1:     move.b  (%0)+,%2\n"     /* get *cs */
+                "       cmp.b   (%1)+,%2\n"     /* compare a byte */
+                "       jne     2f\n"           /* not equal, break out */
+                "       tst.b   %2\n"           /* at end of cs? */
+                "       jne     1b\n"           /* no, keep going */
+                "       jra     3f\n"           /* strings are equal */
+                "2:     sub.b   -(%1),%2\n"     /* *cs - *ct */
+                "3:"
+                : "+a" (cs), "+a" (ct), "=d" (res));
+        return res;
+}
+
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, __kernel_size_t);
+#define memset(d, c, n) __builtin_memset(d, c, n)
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+#define memcpy(d, s, n) __builtin_memcpy(d, s, n)
+
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#define __HAVE_ARCH_MEMCMP
+extern int memcmp(const void *, const void *, __kernel_size_t);
+#define memcmp(d, s, n) __builtin_memcmp(d, s, n)
+
+#endif
+
+#endif /* _M68K_STRING_H_ */
diff --git a/arch/m68k/include/asm/string_no.h b/arch/m68k/include/asm/string_no.h
new file mode 100644
index 000000000000..af09e17000fc
--- /dev/null
+++ b/arch/m68k/include/asm/string_no.h
@@ -0,0 +1,126 @@
+#ifndef _M68KNOMMU_STRING_H_
+#define _M68KNOMMU_STRING_H_
+
+#ifdef __KERNEL__ /* only set these up for kernel code */
+
+#include <asm/setup.h>
+#include <asm/page.h>
+
+#define __HAVE_ARCH_STRCPY
+static inline char * strcpy(char * dest,const char *src)
+{
+  char *xdest = dest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+        "jne 1b"
+        : "=a" (dest), "=a" (src)
+        : "0" (dest), "1" (src) : "memory");
+  return xdest;
+}
+
+#define __HAVE_ARCH_STRNCPY
+static inline char * strncpy(char *dest, const char *src, size_t n)
+{
+  char *xdest = dest;
+
+  if (n == 0)
+    return xdest;
+
+  __asm__ __volatile__
+       ("1:\tmoveb %1@+,%0@+\n\t"
+        "jeq 2f\n\t"
+        "subql #1,%2\n\t"
+        "jne 1b\n\t"
+        "2:"
+        : "=a" (dest), "=a" (src), "=d" (n)
+        : "0" (dest), "1" (src), "2" (n)
+        : "memory");
+  return xdest;
+}
+
+
+#ifndef CONFIG_COLDFIRE
+
+#define __HAVE_ARCH_STRCMP
+static inline int strcmp(const char * cs,const char * ct)
+{
+  char __res;
+
+  __asm__
+       ("1:\tmoveb %0@+,%2\n\t" /* get *cs */
+        "cmpb %1@+,%2\n\t"      /* compare a byte */
+        "jne  2f\n\t"           /* not equal, break out */
+        "tstb %2\n\t"           /* at end of cs? */
+        "jne  1b\n\t"           /* no, keep going */
+        "jra  3f\n\t"           /* strings are equal */
+        "2:\tsubb %1@-,%2\n\t"  /* *cs - *ct */
+        "3:"
+        : "=a" (cs), "=a" (ct), "=d" (__res)
+        : "0" (cs), "1" (ct));
+
+  return __res;
+}
+
+#define __HAVE_ARCH_STRNCMP
+static inline int strncmp(const char * cs,const char * ct,size_t count)
+{
+  char __res;
+
+  if (!count)
+    return 0;
+  __asm__
+       ("1:\tmovb %0@+,%3\n\t"          /* get *cs */
+        "cmpb   %1@+,%3\n\t"            /* compare a byte */
+        "jne    3f\n\t"                 /* not equal, break out */
+        "tstb   %3\n\t"                 /* at end of cs? */
+        "jeq    4f\n\t"                 /* yes, all done */
+        "subql  #1,%2\n\t"              /* no, adjust count */
+        "jne    1b\n\t"                 /* more to do, keep going */
+        "2:\tmoveq #0,%3\n\t"           /* strings are equal */
+        "jra    4f\n\t"
+        "3:\tsubb %1@-,%3\n\t"          /* *cs - *ct */
+        "4:"
+        : "=a" (cs), "=a" (ct), "=d" (count), "=d" (__res)
+        : "0" (cs), "1" (ct), "2" (count));
+  return __res;
+}
+
+#endif /* CONFIG_COLDFIRE */
+
+#define __HAVE_ARCH_MEMSET
+extern void * memset(void * s, int c, size_t count);
+
+#define __HAVE_ARCH_MEMCPY
+extern void * memcpy(void *d, const void *s, size_t count);
+
+#else /* KERNEL */
+
+/*
+ *      let user libraries deal with these,
+ *      IMHO the kernel has no place defining these functions for user apps
+ */
+
+#define __HAVE_ARCH_STRCPY 1
+#define __HAVE_ARCH_STRNCPY 1
+#define __HAVE_ARCH_STRCAT 1
+#define __HAVE_ARCH_STRNCAT 1
+#define __HAVE_ARCH_STRCMP 1
+#define __HAVE_ARCH_STRNCMP 1
+#define __HAVE_ARCH_STRNICMP 1
+#define __HAVE_ARCH_STRCHR 1
+#define __HAVE_ARCH_STRRCHR 1
+#define __HAVE_ARCH_STRSTR 1
+#define __HAVE_ARCH_STRLEN 1
+#define __HAVE_ARCH_STRNLEN 1
+#define __HAVE_ARCH_MEMSET 1
+#define __HAVE_ARCH_MEMCPY 1
+#define __HAVE_ARCH_MEMMOVE 1
+#define __HAVE_ARCH_MEMSCAN 1
+#define __HAVE_ARCH_MEMCMP 1
+#define __HAVE_ARCH_MEMCHR 1
+#define __HAVE_ARCH_STRTOK 1
+
+#endif /* KERNEL */
+
+#endif /* _M68K_STRING_H_ */
diff --git a/arch/m68k/include/asm/sun3-head.h b/arch/m68k/include/asm/sun3-head.h
new file mode 100644
index 000000000000..05af2f18b3bd
--- /dev/null
+++ b/arch/m68k/include/asm/sun3-head.h
@@ -0,0 +1,10 @@
+#ifndef __SUN3_HEAD_H
+#define __SUN3_HEAD_H
+
+#define KERNBASE        0xE000000  /* First address the kernel will eventually be */
+#define LOAD_ADDR       0x4000      /* prom jumps to us here unless this is elf /boot */
+#define FC_CONTROL  3
+#define FC_SUPERD    5
+#define FC_CPU      7
+
+#endif /* __SUN3_HEAD_H */
diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
new file mode 100644
index 000000000000..d4c83f143816
--- /dev/null
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
@@ -0,0 +1,102 @@
+/* sun3_pgalloc.h --
+ * reorganization around 2.3.39, routines moved from sun3_pgtable.h
+ *
+ *
+ * 02/27/2002 -- Modified to support "highpte" implementation in 2.5.5 (Sam)
+ *
+ * moved 1/26/2000 Sam Creasey
+ */
+
+#ifndef _SUN3_PGALLOC_H
+#define _SUN3_PGALLOC_H
+
+#include <asm/tlb.h>
+
+/* FIXME - when we get this compiling */
+/* erm, now that it's compiling, what do we do with it? */
+#define _KERNPG_TABLE 0
+
+extern const char bad_pmd_string[];
+
+#define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); })
+
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+        free_page((unsigned long) pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t page)
+{
+        pgtable_page_dtor(page);
+        __free_page(page);
+}
+
+#define __pte_free_tlb(tlb,pte)                         \
+do {                                                    \
+        pgtable_page_dtor(pte);                         \
+        tlb_remove_page((tlb), pte);                    \
+} while (0)
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+                                          unsigned long address)
+{
+        unsigned long page = __get_free_page(GFP_KERNEL|__GFP_REPEAT);
+
+        if (!page)
+                return NULL;
+
+        memset((void *)page, 0, PAGE_SIZE);
+        return (pte_t *) (page);
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+                                        unsigned long address)
+{
+        struct page *page = alloc_pages(GFP_KERNEL|__GFP_REPEAT, 0);
+
+        if (page == NULL)
+                return NULL;
+
+        clear_highpage(page);
+        pgtable_page_ctor(page);
+        return page;
+
+}
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
+{
+        pmd_val(*pmd) = __pa((unsigned long)pte);
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page)
+{
+        pmd_val(*pmd) = __pa((unsigned long)page_address(page));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * allocating and freeing a pmd is trivial: the 1-entry pmd is
+ * inside the pgd, so has no extra memory associated with it.
+ */
+#define pmd_free(mm, x)                 do { } while (0)
+#define __pmd_free_tlb(tlb, x)          do { } while (0)
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+        free_page((unsigned long) pgd);
+}
+
+static inline pgd_t * pgd_alloc(struct mm_struct *mm)
+{
+     pgd_t *new_pgd;
+
+     new_pgd = (pgd_t *)get_zeroed_page(GFP_KERNEL);
+     memcpy(new_pgd, swapper_pg_dir, PAGE_SIZE);
+     memset(new_pgd, 0, (PAGE_OFFSET >> PGDIR_SHIFT));
+     return new_pgd;
+}
+
+#define pgd_populate(mm, pmd, pte) BUG()
+
+#endif /* SUN3_PGALLOC_H */
diff --git a/arch/m68k/include/asm/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h
new file mode 100644
index 000000000000..f847ec732d62
--- /dev/null
+++ b/arch/m68k/include/asm/sun3_pgtable.h
@@ -0,0 +1,234 @@
+#ifndef _SUN3_PGTABLE_H
+#define _SUN3_PGTABLE_H
+
+#include <asm/sun3mmu.h>
+
+#ifndef __ASSEMBLY__
+#include <asm/virtconvert.h>
+#include <linux/linkage.h>
+
+/*
+ * This file contains all the things which change drastically for the sun3
+ * pagetable stuff, to avoid making too much of a mess of the generic m68k
+ * `pgtable.h'; this should only be included from the generic file. --m
+ */
+
+/* For virtual address to physical address conversion */
+#define VTOP(addr)      __pa(addr)
+#define PTOV(addr)      __va(addr)
+
+
+#endif  /* !__ASSEMBLY__ */
+
+/* These need to be defined for compatibility although the sun3 doesn't use them */
+#define _PAGE_NOCACHE030 0x040
+#define _CACHEMASK040   (~0x060)
+#define _PAGE_NOCACHE_S 0x040
+
+/* Page protection values within PTE. */
+#define SUN3_PAGE_VALID     (0x80000000)
+#define SUN3_PAGE_WRITEABLE (0x40000000)
+#define SUN3_PAGE_SYSTEM    (0x20000000)
+#define SUN3_PAGE_NOCACHE   (0x10000000)
+#define SUN3_PAGE_ACCESSED  (0x02000000)
+#define SUN3_PAGE_MODIFIED  (0x01000000)
+
+
+/* Externally used page protection values. */
+#define _PAGE_PRESENT   (SUN3_PAGE_VALID)
+#define _PAGE_ACCESSED  (SUN3_PAGE_ACCESSED)
+
+#define PTE_FILE_MAX_BITS 28
+
+/* Compound page protection values. */
+//todo: work out which ones *should* have SUN3_PAGE_NOCACHE and fix...
+// is it just PAGE_KERNEL and PAGE_SHARED?
+#define PAGE_NONE       __pgprot(SUN3_PAGE_VALID \
+                                 | SUN3_PAGE_ACCESSED \
+                                 | SUN3_PAGE_NOCACHE)
+#define PAGE_SHARED     __pgprot(SUN3_PAGE_VALID \
+                                 | SUN3_PAGE_WRITEABLE \
+                                 | SUN3_PAGE_ACCESSED \
+                                 | SUN3_PAGE_NOCACHE)
+#define PAGE_COPY       __pgprot(SUN3_PAGE_VALID \
+                                 | SUN3_PAGE_ACCESSED \
+                                 | SUN3_PAGE_NOCACHE)
+#define PAGE_READONLY   __pgprot(SUN3_PAGE_VALID \
+                                 | SUN3_PAGE_ACCESSED \
+                                 | SUN3_PAGE_NOCACHE)
+#define PAGE_KERNEL     __pgprot(SUN3_PAGE_VALID \
+                                 | SUN3_PAGE_WRITEABLE \
+                                 | SUN3_PAGE_SYSTEM \
+                                 | SUN3_PAGE_NOCACHE \
+                                 | SUN3_PAGE_ACCESSED \
+                                 | SUN3_PAGE_MODIFIED)
+#define PAGE_INIT       __pgprot(SUN3_PAGE_VALID \
+                                 | SUN3_PAGE_WRITEABLE \
+                                 | SUN3_PAGE_SYSTEM \
+                                 | SUN3_PAGE_NOCACHE)
+
+/*
+ * Page protections for initialising protection_map. The sun3 has only two
+ * protection settings, valid (implying read and execute) and writeable. These
+ * are as close as we can get...
+ */
+#define __P000  PAGE_NONE
+#define __P001  PAGE_READONLY
+#define __P010  PAGE_COPY
+#define __P011  PAGE_COPY
+#define __P100  PAGE_READONLY
+#define __P101  PAGE_READONLY
+#define __P110  PAGE_COPY
+#define __P111  PAGE_COPY
+
+#define __S000  PAGE_NONE
+#define __S001  PAGE_READONLY
+#define __S010  PAGE_SHARED
+#define __S011  PAGE_SHARED
+#define __S100  PAGE_READONLY
+#define __S101  PAGE_READONLY
+#define __S110  PAGE_SHARED
+#define __S111  PAGE_SHARED
+
+/* Use these fake page-protections on PMDs. */
+#define SUN3_PMD_VALID  (0x00000001)
+#define SUN3_PMD_MASK   (0x0000003F)
+#define SUN3_PMD_MAGIC  (0x0000002B)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, pgprot) pfn_pte(page_to_pfn(page), (pgprot))
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+        pte_val(pte) = (pte_val(pte) & SUN3_PAGE_CHG_MASK) | pgprot_val(newprot);
+        return pte;
+}
+
+#define pmd_set(pmdp,ptep) do {} while (0)
+
+static inline void pgd_set(pgd_t *pgdp, pmd_t *pmdp)
+{
+        pgd_val(*pgdp) = virt_to_phys(pmdp);
+}
+
+#define __pte_page(pte) \
+((unsigned long) __va ((pte_val (pte) & SUN3_PAGE_PGNUM_MASK) << PAGE_SHIFT))
+#define __pmd_page(pmd) \
+((unsigned long) __va (pmd_val (pmd) & PAGE_MASK))
+
+static inline int pte_none (pte_t pte) { return !pte_val (pte); }
+static inline int pte_present (pte_t pte) { return pte_val (pte) & SUN3_PAGE_VALID; }
+static inline void pte_clear (struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+{
+        pte_val (*ptep) = 0;
+}
+
+#define pte_pfn(pte)            (pte_val(pte) & SUN3_PAGE_PGNUM_MASK)
+#define pfn_pte(pfn, pgprot) \
+({ pte_t __pte; pte_val(__pte) = pfn | pgprot_val(pgprot); __pte; })
+
+#define pte_page(pte)           virt_to_page(__pte_page(pte))
+#define pmd_page(pmd)           virt_to_page(__pmd_page(pmd))
+
+
+static inline int pmd_none2 (pmd_t *pmd) { return !pmd_val (*pmd); }
+#define pmd_none(pmd) pmd_none2(&(pmd))
+//static inline int pmd_bad (pmd_t pmd) { return (pmd_val (pmd) & SUN3_PMD_MASK) != SUN3_PMD_MAGIC; }
+static inline int pmd_bad2 (pmd_t *pmd) { return 0; }
+#define pmd_bad(pmd) pmd_bad2(&(pmd))
+static inline int pmd_present2 (pmd_t *pmd) { return pmd_val (*pmd) & SUN3_PMD_VALID; }
+/* #define pmd_present(pmd) pmd_present2(&(pmd)) */
+#define pmd_present(pmd) (!pmd_none2(&(pmd)))
+static inline void pmd_clear (pmd_t *pmdp) { pmd_val (*pmdp) = 0; }
+
+static inline int pgd_none (pgd_t pgd) { return 0; }
+static inline int pgd_bad (pgd_t pgd) { return 0; }
+static inline int pgd_present (pgd_t pgd) { return 1; }
+static inline void pgd_clear (pgd_t *pgdp) {}
+
+
+#define pte_ERROR(e) \
+        printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+#define pmd_ERROR(e) \
+        printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+#define pgd_ERROR(e) \
+        printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not...
+ * [we have the full set here even if they don't change from m68k]
+ */
+static inline int pte_write(pte_t pte)          { return pte_val(pte) & SUN3_PAGE_WRITEABLE; }
+static inline int pte_dirty(pte_t pte)          { return pte_val(pte) & SUN3_PAGE_MODIFIED; }
+static inline int pte_young(pte_t pte)          { return pte_val(pte) & SUN3_PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte)           { return pte_val(pte) & SUN3_PAGE_ACCESSED; }
+static inline int pte_special(pte_t pte)        { return 0; }
+
+static inline pte_t pte_wrprotect(pte_t pte)    { pte_val(pte) &= ~SUN3_PAGE_WRITEABLE; return pte; }
+static inline pte_t pte_mkclean(pte_t pte)      { pte_val(pte) &= ~SUN3_PAGE_MODIFIED; return pte; }
+static inline pte_t pte_mkold(pte_t pte)        { pte_val(pte) &= ~SUN3_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mkwrite(pte_t pte)      { pte_val(pte) |= SUN3_PAGE_WRITEABLE; return pte; }
+static inline pte_t pte_mkdirty(pte_t pte)      { pte_val(pte) |= SUN3_PAGE_MODIFIED; return pte; }
+static inline pte_t pte_mkyoung(pte_t pte)      { pte_val(pte) |= SUN3_PAGE_ACCESSED; return pte; }
+static inline pte_t pte_mknocache(pte_t pte)    { pte_val(pte) |= SUN3_PAGE_NOCACHE; return pte; }
+// use this version when caches work...
+//static inline pte_t pte_mkcache(pte_t pte)    { pte_val(pte) &= SUN3_PAGE_NOCACHE; return pte; }
+// until then, use:
+static inline pte_t pte_mkcache(pte_t pte)      { return pte; }
+static inline pte_t pte_mkspecial(pte_t pte)    { return pte; }
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern pgd_t kernel_pg_dir[PTRS_PER_PGD];
+
+/* Find an entry in a pagetable directory. */
+#define pgd_index(address)     ((address) >> PGDIR_SHIFT)
+
+#define pgd_offset(mm, address) \
+((mm)->pgd + pgd_index(address))
+
+/* Find an entry in a kernel pagetable directory. */
+#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+/* Find an entry in the second-level pagetable. */
+static inline pmd_t *pmd_offset (pgd_t *pgd, unsigned long address)
+{
+        return (pmd_t *) pgd;
+}
+
+static inline unsigned long pte_to_pgoff(pte_t pte)
+{
+        return pte.pte & SUN3_PAGE_PGNUM_MASK;
+}
+
+static inline pte_t pgoff_to_pte(unsigned off)
+{
+        pte_t pte = { off + SUN3_PAGE_ACCESSED };
+        return pte;
+}
+
+
+/* Find an entry in the third-level pagetable. */
+#define pte_index(address) ((address >> PAGE_SHIFT) & (PTRS_PER_PTE-1))
+#define pte_offset_kernel(pmd, address) ((pte_t *) __pmd_page(*pmd) + pte_index(address))
+/* FIXME: should we bother with kmap() here? */
+#define pte_offset_map(pmd, address) ((pte_t *)kmap(pmd_page(*pmd)) + pte_index(address))
+#define pte_offset_map_nested(pmd, address) pte_offset_map(pmd, address)
+#define pte_unmap(pte) kunmap(pte)
+#define pte_unmap_nested(pte) kunmap(pte)
+
+/* Macros to (de)construct the fake PTEs representing swap pages. */
+#define __swp_type(x)           ((x).val & 0x7F)
+#define __swp_offset(x)         (((x).val) >> 7)
+#define __swp_entry(type,offset) ((swp_entry_t) { ((type) | ((offset) << 7)) })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)   ((pte_t) { (x).val })
+
+#endif  /* !__ASSEMBLY__ */
+#endif  /* !_SUN3_PGTABLE_H */
diff --git a/arch/m68k/include/asm/sun3ints.h b/arch/m68k/include/asm/sun3ints.h
new file mode 100644
index 000000000000..309d6e6a1374
--- /dev/null
+++ b/arch/m68k/include/asm/sun3ints.h
@@ -0,0 +1,37 @@
+/*
+ * sun3ints.h -- Linux/Sun3 interrupt handling code definitions
+ *
+ * Erik Verbruggen (erik@bigmama.xtdnet.nl)
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef SUN3INTS_H
+#define SUN3INTS_H
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/intersil.h>
+#include <asm/oplib.h>
+#include <asm/traps.h>
+#include <asm/irq.h>
+
+#define SUN3_INT_VECS 192
+
+void sun3_enable_irq(unsigned int irq);
+void sun3_disable_irq(unsigned int irq);
+extern void sun3_init_IRQ (void);
+extern void sun3_enable_interrupts (void);
+extern void sun3_disable_interrupts (void);
+extern volatile unsigned char* sun3_intreg;
+
+/* master list of VME vectors -- don't fuck with this */
+#define SUN3_VEC_FLOPPY         (IRQ_USER+0)
+#define SUN3_VEC_VMESCSI0       (IRQ_USER+0)
+#define SUN3_VEC_VMESCSI1       (IRQ_USER+1)
+#define SUN3_VEC_CG             (IRQ_USER+104)
+
+
+#endif /* SUN3INTS_H */
diff --git a/arch/m68k/include/asm/sun3mmu.h b/arch/m68k/include/asm/sun3mmu.h
new file mode 100644
index 000000000000..d8f17a0d8c9f
--- /dev/null
+++ b/arch/m68k/include/asm/sun3mmu.h
@@ -0,0 +1,171 @@
+/*
+ * Definitions for Sun3 custom MMU.
+ */
+#ifndef __SUN3_MMU_H__
+#define __SUN3_MMU_H__
+
+#include <linux/types.h>
+#include <asm/movs.h>
+#include <asm/sun3-head.h>
+
+/* MMU characteristics. */
+#define SUN3_SEGMAPS_PER_CONTEXT        2048
+#define SUN3_PMEGS_NUM                  256
+#define SUN3_CONTEXTS_NUM               8
+
+#define SUN3_PMEG_SIZE_BITS      17
+#define SUN3_PMEG_SIZE           (1 << SUN3_PMEG_SIZE_BITS)
+#define SUN3_PMEG_MASK           (SUN3_PMEG_SIZE - 1)
+
+#define SUN3_PTE_SIZE_BITS       13
+#define SUN3_PTE_SIZE            (1 << SUN3_PTE_SIZE_BITS)
+#define SUN3_PTE_MASK            (SUN3_PTE_SIZE - 1)
+
+#define SUN3_CONTROL_MASK       (0x0FFFFFFC)
+#define SUN3_INVALID_PMEG       255
+#define SUN3_INVALID_CONTEXT 255
+
+#define AC_IDPROM     0x00000000    /* 34  ID PROM, R/O, byte, 32 bytes      */
+#define AC_PAGEMAP    0x10000000    /* 3   Pagemap R/W, long                 */
+#define AC_SEGMAP     0x20000000    /* 3   Segment map, byte                 */
+#define AC_CONTEXT    0x30000000    /* 34c current mmu-context               */
+#define AC_SENABLE    0x40000000    /* 34c system dvma/cache/reset enable reg*/
+#define AC_UDVMA_ENB  0x50000000    /* 34  Not used on Sun boards, byte      */
+#define AC_BUS_ERROR  0x60000000    /* 34  Cleared on read, byte.            */
+#define AC_SYNC_ERR   0x60000000    /*   c fault type                        */
+#define AC_SYNC_VA    0x60000004    /*   c fault virtual address             */
+#define AC_ASYNC_ERR  0x60000008    /*   c asynchronous fault type           */
+#define AC_ASYNC_VA   0x6000000c    /*   c async fault virtual address       */
+#define AC_LEDS       0x70000000    /* 34  Zero turns on LEDs, byte          */
+#define AC_CACHETAGS  0x80000000    /* 34c direct access to the VAC tags     */
+#define AC_CACHEDDATA 0x90000000    /* 3 c direct access to the VAC data     */
+#define AC_UDVMA_MAP  0xD0000000    /* 4   Not used on Sun boards, byte      */
+#define AC_VME_VECTOR 0xE0000000    /* 4   For non-Autovector VME, byte      */
+#define AC_BOOT_SCC   0xF0000000    /* 34  bypass to access Zilog 8530. byte.*/
+
+#define SUN3_PAGE_CHG_MASK (SUN3_PAGE_PGNUM_MASK \
+                            | SUN3_PAGE_ACCESSED | SUN3_PAGE_MODIFIED)
+
+/* Bus access type within PTE. */
+#define SUN3_PAGE_TYPE_MASK   (0x0c000000)
+#define SUN3_PAGE_TYPE_MEMORY (0x00000000)
+#define SUN3_PAGE_TYPE_IO     (0x04000000)
+#define SUN3_PAGE_TYPE_VME16  (0x08000000)
+#define SUN3_PAGE_TYPE_VME32  (0x0c000000)
+
+/* Mask for page number within PTE. */
+#define SUN3_PAGE_PGNUM_MASK (0x0007FFFF)
+
+/* Bits within bus-error register. */
+#define SUN3_BUSERR_WATCHDOG    (0x01)
+#define SUN3_BUSERR_unused      (0x02)
+#define SUN3_BUSERR_FPAENERR    (0x04)
+#define SUN3_BUSERR_FPABERR     (0x08)
+#define SUN3_BUSERR_VMEBERR     (0x10)
+#define SUN3_BUSERR_TIMEOUT     (0x20)
+#define SUN3_BUSERR_PROTERR     (0x40)
+#define SUN3_BUSERR_INVALID     (0x80)
+
+#ifndef __ASSEMBLY__
+
+/* Read bus error status register (implicitly clearing it). */
+static inline unsigned char sun3_get_buserr(void)
+{
+        unsigned char sfc, c;
+
+        GET_SFC (sfc);
+        SET_SFC (FC_CONTROL);
+        GET_CONTROL_BYTE (AC_BUS_ERROR, c);
+        SET_SFC (sfc);
+
+        return c;
+}
+
+/* Read segmap from hardware MMU. */
+static inline unsigned long sun3_get_segmap(unsigned long addr)
+{
+        register unsigned long entry;
+        unsigned char c, sfc;
+
+        GET_SFC (sfc);
+        SET_SFC (FC_CONTROL);
+        GET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), c);
+        SET_SFC (sfc);
+        entry = c;
+
+        return entry;
+}
+
+/* Write segmap to hardware MMU. */
+static inline void sun3_put_segmap(unsigned long addr, unsigned long entry)
+{
+        unsigned char sfc;
+
+        GET_DFC (sfc);
+        SET_DFC (FC_CONTROL);
+        SET_CONTROL_BYTE (AC_SEGMAP | (addr & SUN3_CONTROL_MASK), entry);
+        SET_DFC (sfc);
+
+        return;
+}
+
+/* Read PTE from hardware MMU. */
+static inline unsigned long sun3_get_pte(unsigned long addr)
+{
+        register unsigned long entry;
+        unsigned char sfc;
+
+        GET_SFC (sfc);
+        SET_SFC (FC_CONTROL);
+        GET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
+        SET_SFC (sfc);
+
+        return entry;
+}
+
+/* Write PTE to hardware MMU. */
+static inline void sun3_put_pte(unsigned long addr, unsigned long entry)
+{
+        unsigned char sfc;
+
+        GET_DFC (sfc);
+        SET_DFC (FC_CONTROL);
+        SET_CONTROL_WORD (AC_PAGEMAP | (addr & SUN3_CONTROL_MASK), entry);
+        SET_DFC (sfc);
+
+        return;
+}
+
+/* get current context */
+static inline unsigned char sun3_get_context(void)
+{
+        unsigned char sfc, c;
+
+        GET_SFC(sfc);
+        SET_SFC(FC_CONTROL);
+        GET_CONTROL_BYTE(AC_CONTEXT, c);
+        SET_SFC(sfc);
+
+        return c;
+}
+
+/* set alternate context */
+static inline void sun3_put_context(unsigned char c)
+{
+        unsigned char dfc;
+        GET_DFC(dfc);
+        SET_DFC(FC_CONTROL);
+        SET_CONTROL_BYTE(AC_CONTEXT, c);
+        SET_DFC(dfc);
+
+        return;
+}
+
+extern void __iomem *sun3_ioremap(unsigned long phys, unsigned long size,
+                          unsigned long type);
+
+extern int sun3_map_test(unsigned long addr, char *val);
+
+#endif  /* !__ASSEMBLY__ */
+
+#endif  /* !__SUN3_MMU_H__ */
diff --git a/arch/m68k/include/asm/sun3x.h b/arch/m68k/include/asm/sun3x.h
new file mode 100644
index 000000000000..f5691a1ed7cc
--- /dev/null
+++ b/arch/m68k/include/asm/sun3x.h
@@ -0,0 +1,27 @@
+#ifndef SUN3X_H
+#define SUN3X_H
+
+/* hardware addresses */
+#define SUN3X_IOMMU       0x60000000
+#define SUN3X_ENAREG      0x61000000
+#define SUN3X_INTREG      0x61001400
+#define SUN3X_DIAGREG     0x61001800
+#define SUN3X_ZS1         0x62000000
+#define SUN3X_ZS2         0x62002000
+#define SUN3X_LANCE       0x65002000
+#define SUN3X_EEPROM      0x64000000
+#define SUN3X_IDPROM      0x640007d8
+#define SUN3X_VIDEO_BASE  0x50000000
+#define SUN3X_VIDEO_P4ID  0x50300000
+#define SUN3X_ESP_BASE    0x66000000
+#define SUN3X_ESP_DMA     0x66001000
+#define SUN3X_FDC         0x6e000000
+#define SUN3X_FDC_FCR     0x6e000400
+#define SUN3X_FDC_FVR     0x6e000800
+
+/* some NVRAM addresses */
+#define SUN3X_EEPROM_CONS       (SUN3X_EEPROM + 0x1f)
+#define SUN3X_EEPROM_PORTA      (SUN3X_EEPROM + 0x58)
+#define SUN3X_EEPROM_PORTB      (SUN3X_EEPROM + 0x60)
+
+#endif
diff --git a/arch/m68k/include/asm/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h
new file mode 100644
index 000000000000..32c45f84ac60
--- /dev/null
+++ b/arch/m68k/include/asm/sun3xflop.h
@@ -0,0 +1,263 @@
+/* sun3xflop.h: Sun3/80 specific parts of the floppy driver.
+ *
+ * Derived partially from asm-sparc/floppy.h, which is:
+ *     Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ *
+ * Sun3x version 2/4/2000 Sam Creasey (sammy@sammy.net)
+ */
+
+#ifndef __ASM_SUN3X_FLOPPY_H
+#define __ASM_SUN3X_FLOPPY_H
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+#include <asm/sun3x.h>
+
+/* default interrupt vector */
+#define SUN3X_FDC_IRQ 0x40
+
+/* some constants */
+#define FCR_TC 0x1
+#define FCR_EJECT 0x2
+#define FCR_MTRON 0x4
+#define FCR_DSEL1 0x8
+#define FCR_DSEL0 0x10
+
+/* We don't need no stinkin' I/O port allocation crap. */
+#undef release_region
+#undef request_region
+#define release_region(X, Y)    do { } while(0)
+#define request_region(X, Y, Z) (1)
+
+struct sun3xflop_private {
+        volatile unsigned char *status_r;
+        volatile unsigned char *data_r;
+        volatile unsigned char *fcr_r;
+        volatile unsigned char *fvr_r;
+        unsigned char fcr;
+} sun3x_fdc;
+
+/* Super paranoid... */
+#undef HAVE_DISABLE_HLT
+
+/* Routines unique to each controller type on a Sun. */
+static unsigned char sun3x_82072_fd_inb(int port)
+{
+        static int once = 0;
+//      udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to read unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 4: /* FD_STATUS */
+                return (*sun3x_fdc.status_r) & ~STATUS_DMA;
+        case 5: /* FD_DATA */
+                return (*sun3x_fdc.data_r);
+        case 7: /* FD_DIR */
+                /* ugly hack, I can't find a way to actually detect the disk */
+                if(!once) {
+                        once = 1;
+                        return 0x80;
+                }
+                return 0;
+        };
+        panic("sun_82072_fd_inb: How did I get here?");
+}
+
+static void sun3x_82072_fd_outb(unsigned char value, int port)
+{
+//      udelay(5);
+        switch(port & 7) {
+        default:
+                printk("floppy: Asked to write to unknown port %d\n", port);
+                panic("floppy: Port bolixed.");
+        case 2: /* FD_DOR */
+                /* Oh geese, 82072 on the Sun has no DOR register,
+                 * so we make do with taunting the FCR.
+                 *
+                 * ASSUMPTIONS:  There will only ever be one floppy
+                 *               drive attached to a Sun controller
+                 *               and it will be at drive zero.
+                 */
+
+        {
+                unsigned char fcr = sun3x_fdc.fcr;
+
+                if(value & 0x10) {
+                        fcr |= (FCR_DSEL0 | FCR_MTRON);
+                } else
+                        fcr &= ~(FCR_DSEL0 | FCR_MTRON);
+
+
+                if(fcr != sun3x_fdc.fcr) {
+                        *(sun3x_fdc.fcr_r) = fcr;
+                        sun3x_fdc.fcr = fcr;
+                }
+        }
+                break;
+        case 5: /* FD_DATA */
+                *(sun3x_fdc.data_r) = value;
+                break;
+        case 7: /* FD_DCR */
+                *(sun3x_fdc.status_r) = value;
+                break;
+        case 4: /* FD_STATUS */
+                *(sun3x_fdc.status_r) = value;
+                break;
+        };
+        return;
+}
+
+
+asmlinkage irqreturn_t sun3xflop_hardint(int irq, void *dev_id)
+{
+        register unsigned char st;
+
+#undef TRACE_FLPY_INT
+#define NO_FLOPPY_ASSEMBLER
+
+#ifdef TRACE_FLPY_INT
+        static int calls=0;
+        static int bytes=0;
+        static int dma_wait=0;
+#endif
+        if(!doing_pdma) {
+                floppy_interrupt(irq, dev_id);
+                return IRQ_HANDLED;
+        }
+
+//      printk("doing pdma\n");// st %x\n", sun_fdc->status_82072);
+
+#ifdef TRACE_FLPY_INT
+        if(!calls)
+                bytes = virtual_dma_count;
+#endif
+
+        {
+                register int lcount;
+                register char *lptr;
+
+                for(lcount=virtual_dma_count, lptr=virtual_dma_addr;
+                    lcount; lcount--, lptr++) {
+/*                      st=fd_inb(virtual_dma_port+4) & 0x80 ;  */
+                        st = *(sun3x_fdc.status_r);
+/*                      if(st != 0xa0)                  */
+/*                              break;                  */
+
+                        if((st & 0x80) == 0) {
+                                virtual_dma_count = lcount;
+                                virtual_dma_addr = lptr;
+                                return IRQ_HANDLED;
+                        }
+
+                        if((st & 0x20) == 0)
+                                break;
+
+                        if(virtual_dma_mode)
+/*                              fd_outb(*lptr, virtual_dma_port+5); */
+                                *(sun3x_fdc.data_r) = *lptr;
+                        else
+/*                              *lptr = fd_inb(virtual_dma_port+5); */
+                                *lptr = *(sun3x_fdc.data_r);
+                }
+
+                virtual_dma_count = lcount;
+                virtual_dma_addr = lptr;
+/*              st = fd_inb(virtual_dma_port+4);   */
+                st = *(sun3x_fdc.status_r);
+        }
+
+#ifdef TRACE_FLPY_INT
+        calls++;
+#endif
+//      printk("st=%02x\n", st);
+        if(st == 0x20)
+                return IRQ_HANDLED;
+        if(!(st & 0x20)) {
+                virtual_dma_residue += virtual_dma_count;
+                virtual_dma_count=0;
+                doing_pdma = 0;
+
+#ifdef TRACE_FLPY_INT
+                printk("count=%x, residue=%x calls=%d bytes=%x dma_wait=%d\n",
+                       virtual_dma_count, virtual_dma_residue, calls, bytes,
+                       dma_wait);
+                calls = 0;
+                dma_wait=0;
+#endif
+
+                floppy_interrupt(irq, dev_id);
+                return IRQ_HANDLED;
+        }
+
+
+#ifdef TRACE_FLPY_INT
+        if(!virtual_dma_count)
+                dma_wait++;
+#endif
+        return IRQ_HANDLED;
+}
+
+static int sun3xflop_request_irq(void)
+{
+        static int once = 0;
+        int error;
+
+        if(!once) {
+                once = 1;
+                error = request_irq(FLOPPY_IRQ, sun3xflop_hardint,
+                                    IRQF_DISABLED, "floppy", NULL);
+                return ((error == 0) ? 0 : -1);
+        } else return 0;
+}
+
+static void __init floppy_set_flags(int *ints,int param, int param2);
+
+static int sun3xflop_init(void)
+{
+        if(FLOPPY_IRQ < 0x40)
+                FLOPPY_IRQ = SUN3X_FDC_IRQ;
+
+        sun3x_fdc.status_r = (volatile unsigned char *)SUN3X_FDC;
+        sun3x_fdc.data_r  = (volatile unsigned char *)(SUN3X_FDC+1);
+        sun3x_fdc.fcr_r = (volatile unsigned char *)SUN3X_FDC_FCR;
+        sun3x_fdc.fvr_r = (volatile unsigned char *)SUN3X_FDC_FVR;
+        sun3x_fdc.fcr = 0;
+
+        /* Last minute sanity check... */
+        if(*sun3x_fdc.status_r == 0xff) {
+                return -1;
+        }
+
+        *sun3x_fdc.fvr_r = FLOPPY_IRQ;
+
+        *sun3x_fdc.fcr_r = FCR_TC;
+        udelay(10);
+        *sun3x_fdc.fcr_r = 0;
+
+        /* Success... */
+        floppy_set_flags(NULL, 1, FD_BROKEN_DCL); // I don't know how to detect this.
+        allowed_drive_mask = 0x01;
+        return (int) SUN3X_FDC;
+}
+
+/* I'm not precisely sure this eject routine works */
+static int sun3x_eject(void)
+{
+        if(MACH_IS_SUN3X) {
+
+                sun3x_fdc.fcr |= (FCR_DSEL0 | FCR_EJECT);
+                *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
+                udelay(10);
+                sun3x_fdc.fcr &= ~(FCR_DSEL0 | FCR_EJECT);
+                *(sun3x_fdc.fcr_r) = sun3x_fdc.fcr;
+        }
+
+        return 0;
+}
+
+#define fd_eject(drive) sun3x_eject()
+
+#endif /* !(__ASM_SUN3X_FLOPPY_H) */
diff --git a/arch/m68k/include/asm/sun3xprom.h b/arch/m68k/include/asm/sun3xprom.h
new file mode 100644
index 000000000000..6735efcf5f6d
--- /dev/null
+++ b/arch/m68k/include/asm/sun3xprom.h
@@ -0,0 +1,43 @@
+/* Useful PROM locations */
+
+#ifndef SUN3X_PROM_H
+#define SUN3X_PROM_H
+
+extern void (*sun3x_putchar)(int);
+extern int (*sun3x_getchar)(void);
+extern int (*sun3x_mayget)(void);
+extern int (*sun3x_mayput)(int);
+
+void sun3x_reboot(void);
+void sun3x_abort(void);
+void sun3x_prom_init(void);
+unsigned long sun3x_prom_ptov(unsigned long pa, unsigned long size);
+
+/* interesting hardware locations */
+#define SUN3X_IOMMU       0x60000000
+#define SUN3X_ENAREG      0x61000000
+#define SUN3X_INTREG      0x61001400
+#define SUN3X_DIAGREG     0x61001800
+#define SUN3X_ZS1         0x62000000
+#define SUN3X_ZS2         0x62002000
+#define SUN3X_LANCE       0x65002000
+#define SUN3X_EEPROM      0x64000000
+#define SUN3X_IDPROM      0x640007d8
+#define SUN3X_VIDEO_BASE  0x50400000
+#define SUN3X_VIDEO_REGS  0x50300000
+
+/* vector table */
+#define SUN3X_PROM_BASE   0xfefe0000
+#define SUN3X_P_GETCHAR   (SUN3X_PROM_BASE + 20)
+#define SUN3X_P_PUTCHAR   (SUN3X_PROM_BASE + 24)
+#define SUN3X_P_MAYGET    (SUN3X_PROM_BASE + 28)
+#define SUN3X_P_MAYPUT    (SUN3X_PROM_BASE + 32)
+#define SUN3X_P_REBOOT    (SUN3X_PROM_BASE + 96)
+#define SUN3X_P_SETLEDS   (SUN3X_PROM_BASE + 144)
+#define SUN3X_P_ABORT     (SUN3X_PROM_BASE + 152)
+
+/* mapped area */
+#define SUN3X_MAP_START   0xfee00000
+#define SUN3X_MAP_END     0xff000000
+
+#endif
diff --git a/arch/m68k/include/asm/suspend.h b/arch/m68k/include/asm/suspend.h
new file mode 100644
index 000000000000..57b3ddb4d269
--- /dev/null
+++ b/arch/m68k/include/asm/suspend.h
@@ -0,0 +1,6 @@
+#ifndef _M68K_SUSPEND_H
+#define _M68K_SUSPEND_H
+
+/* Dummy include. */
+
+#endif  /* _M68K_SUSPEND_H */
diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h
new file mode 100644
index 000000000000..e69de29bb2d1
--- /dev/null
+++ b/arch/m68k/include/asm/swab.h
diff --git a/arch/m68k/include/asm/swab_mm.h b/arch/m68k/include/asm/swab_mm.h
new file mode 100644
index 000000000000..7221e3066825
--- /dev/null
+++ b/arch/m68k/include/asm/swab_mm.h
@@ -0,0 +1,16 @@
+#ifndef _M68K_SWAB_H
+#define _M68K_SWAB_H
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#define __SWAB_64_THRU_32__
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+        __asm__("rolw #8,%0; swap %0; rolw #8,%0" : "=d" (val) : "0" (val));
+        return val;
+}
+#define __arch_swab32 __arch_swab32
+
+#endif /* _M68K_SWAB_H */
diff --git a/arch/m68k/include/asm/swab_no.h b/arch/m68k/include/asm/swab_no.h
new file mode 100644
index 000000000000..e582257db300
--- /dev/null
+++ b/arch/m68k/include/asm/swab_no.h
@@ -0,0 +1,24 @@
+#ifndef _M68KNOMMU_SWAB_H
+#define _M68KNOMMU_SWAB_H
+
+#include <linux/types.h>
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __SWAB_64_THRU_32__
+#endif
+
+#if defined (__mcfisaaplus__) || defined (__mcfisac__)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 val)
+{
+        asm(
+                        "byterev %0"
+                        : "=d" (val)
+                        : "0" (val)
+           );
+        return val;
+}
+
+#define __arch_swab32 __arch_swab32
+#endif
+
+#endif /* _M68KNOMMU_SWAB_H */
diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h
new file mode 100644
index 000000000000..ccea925ff4f5
--- /dev/null
+++ b/arch/m68k/include/asm/system.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "system_no.h"
+#else
+#include "system_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/system_mm.h b/arch/m68k/include/asm/system_mm.h
new file mode 100644
index 000000000000..dbb6515ffd5b
--- /dev/null
+++ b/arch/m68k/include/asm/system_mm.h
@@ -0,0 +1,218 @@
+#ifndef _M68K_SYSTEM_H
+#define _M68K_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <linux/kernel.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+#ifdef __KERNEL__
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last) do { \
+  register void *_prev __asm__ ("a0") = (prev); \
+  register void *_next __asm__ ("a1") = (next); \
+  register void *_last __asm__ ("d1"); \
+  __asm__ __volatile__("jbsr resume" \
+                       : "=a" (_prev), "=a" (_next), "=d" (_last) \
+                       : "0" (_prev), "1" (_next) \
+                       : "d0", "d2", "d3", "d4", "d5"); \
+  (last) = _last; \
+} while (0)
+
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop()           do { asm volatile ("nop"); barrier(); } while (0)
+#define mb()            barrier()
+#define rmb()           barrier()
+#define wmb()           barrier()
+#define read_barrier_depends()  ((void)0)
+#define set_mb(var, value)      ({ (var) = (value); wmb(); })
+
+#define smp_mb()        barrier()
+#define smp_rmb()       barrier()
+#define smp_wmb()       barrier()
+#define smp_read_barrier_depends()      ((void)0)
+
+/* interrupt control.. */
+#if 0
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#else
+#include <linux/hardirq.h>
+#define local_irq_enable() ({                                                   \
+        if (MACH_IS_Q40 || !hardirq_count())                                    \
+                asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory");    \
+})
+#endif
+#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+static inline int irqs_disabled(void)
+{
+        unsigned long flags;
+        local_save_flags(flags);
+        return flags & ~ALLOWINT;
+}
+
+/* For spinlocks etc */
+#define local_irq_save(x)       ({ local_save_flags(x); local_irq_disable(); })
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+        unsigned long flags, tmp;
+
+        local_irq_save(flags);
+
+        switch (size) {
+        case 1:
+                tmp = *(u8 *)ptr;
+                *(u8 *)ptr = x;
+                x = tmp;
+                break;
+        case 2:
+                tmp = *(u16 *)ptr;
+                *(u16 *)ptr = x;
+                x = tmp;
+                break;
+        case 4:
+                tmp = *(u32 *)ptr;
+                *(u32 *)ptr = x;
+                x = tmp;
+                break;
+        default:
+                BUG();
+        }
+
+        local_irq_restore(flags);
+        return x;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+        switch (size) {
+            case 1:
+                __asm__ __volatile__
+                        ("moveb %2,%0\n\t"
+                         "1:\n\t"
+                         "casb %0,%1,%2\n\t"
+                         "jne 1b"
+                         : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+                break;
+            case 2:
+                __asm__ __volatile__
+                        ("movew %2,%0\n\t"
+                         "1:\n\t"
+                         "casw %0,%1,%2\n\t"
+                         "jne 1b"
+                         : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+                break;
+            case 4:
+                __asm__ __volatile__
+                        ("movel %2,%0\n\t"
+                         "1:\n\t"
+                         "casl %0,%1,%2\n\t"
+                         "jne 1b"
+                         : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+                break;
+        }
+        return x;
+}
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+/*
+ * Atomic compare and exchange.  Compare OLD with MEM, if identical,
+ * store NEW in MEM.  Return the initial value in MEM.  Success is
+ * indicated by comparing RETURN with OLD.
+ */
+#ifdef CONFIG_RMW_INSNS
+#define __HAVE_ARCH_CMPXCHG     1
+
+static inline unsigned long __cmpxchg(volatile void *p, unsigned long old,
+                                      unsigned long new, int size)
+{
+        switch (size) {
+        case 1:
+                __asm__ __volatile__ ("casb %0,%2,%1"
+                                      : "=d" (old), "=m" (*(char *)p)
+                                      : "d" (new), "0" (old), "m" (*(char *)p));
+                break;
+        case 2:
+                __asm__ __volatile__ ("casw %0,%2,%1"
+                                      : "=d" (old), "=m" (*(short *)p)
+                                      : "d" (new), "0" (old), "m" (*(short *)p));
+                break;
+        case 4:
+                __asm__ __volatile__ ("casl %0,%2,%1"
+                                      : "=d" (old), "=m" (*(int *)p)
+                                      : "d" (new), "0" (old), "m" (*(int *)p));
+                break;
+        }
+        return old;
+}
+
+#define cmpxchg(ptr, o, n)                                                  \
+        ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),           \
+                        (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg_local(ptr, o, n)                                            \
+        ((__typeof__(*(ptr)))__cmpxchg((ptr), (unsigned long)(o),           \
+                        (unsigned long)(n), sizeof(*(ptr))))
+#else
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)                                               \
+        ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+                        (unsigned long)(n), sizeof(*(ptr))))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#endif
+
+#define arch_align_stack(x) (x)
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_SYSTEM_H */
diff --git a/arch/m68k/include/asm/system_no.h b/arch/m68k/include/asm/system_no.h
new file mode 100644
index 000000000000..40f49de69821
--- /dev/null
+++ b/arch/m68k/include/asm/system_no.h
@@ -0,0 +1,324 @@
+#ifndef _M68KNOMMU_SYSTEM_H
+#define _M68KNOMMU_SYSTEM_H
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/entry.h>
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.  This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+/*
+ * switch_to() saves the extra registers, that are not saved
+ * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
+ * a0-a1. Some of these are used by schedule() and its predecessors
+ * and so we might get see unexpected behaviors when a task returns
+ * with unexpected register values.
+ *
+ * syscall stores these registers itself and none of them are used
+ * by syscall after the function in the syscall has been called.
+ *
+ * Beware that resume now expects *next to be in d1 and the offset of
+ * tss to be in a1. This saves a few instructions as we no longer have
+ * to push them onto the stack and read them back right after.
+ *
+ * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
+ *
+ * Changed 96/09/19 by Andreas Schwab
+ * pass prev in a0, next in a1, offset of tss in d1, and whether
+ * the mm structures are shared in d2 (to avoid atc flushing).
+ */
+asmlinkage void resume(void);
+#define switch_to(prev,next,last)                               \
+{                                                               \
+  void *_last;                                                  \
+  __asm__ __volatile__(                                         \
+        "movel  %1, %%a0\n\t"                                   \
+        "movel  %2, %%a1\n\t"                                   \
+        "jbsr resume\n\t"                                       \
+        "movel  %%d1, %0\n\t"                                   \
+       : "=d" (_last)                                           \
+       : "d" (prev), "d" (next)                                 \
+       : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
+  (last) = _last;                                               \
+}
+
+#ifdef CONFIG_COLDFIRE
+#define local_irq_enable() __asm__ __volatile__ (               \
+        "move %/sr,%%d0\n\t"                                    \
+        "andi.l #0xf8ff,%%d0\n\t"                               \
+        "move %%d0,%/sr\n"                                      \
+        : /* no outputs */                                      \
+        :                                                       \
+        : "cc", "%d0", "memory")
+#define local_irq_disable() __asm__ __volatile__ (              \
+        "move %/sr,%%d0\n\t"                                    \
+        "ori.l #0x0700,%%d0\n\t"                                \
+        "move %%d0,%/sr\n"                                      \
+        : /* no outputs */                                      \
+        :                                                       \
+        : "cc", "%d0", "memory")
+/* For spinlocks etc */
+#define local_irq_save(x) __asm__ __volatile__ (                \
+        "movew %%sr,%0\n\t"                                     \
+        "movew #0x0700,%%d0\n\t"                                \
+        "or.l  %0,%%d0\n\t"                                     \
+        "movew %%d0,%/sr"                                       \
+        : "=d" (x)                                              \
+        :                                                       \
+        : "cc", "%d0", "memory")
+#else
+
+/* portable version */ /* FIXME - see entry.h*/
+#define ALLOWINT 0xf8ff
+
+#define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
+#define local_irq_disable() asm volatile ("oriw  #0x0700,%%sr": : : "memory")
+#endif
+
+#define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
+#define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
+
+/* For spinlocks etc */
+#ifndef local_irq_save
+#define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
+#endif
+
+#define irqs_disabled()                 \
+({                                      \
+        unsigned long flags;            \
+        local_save_flags(flags);        \
+        ((flags & 0x0700) == 0x0700);   \
+})
+
+#define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on m68k...
+ */
+#define nop()  asm volatile ("nop"::)
+#define mb()   asm volatile (""   : : :"memory")
+#define rmb()  asm volatile (""   : : :"memory")
+#define wmb()  asm volatile (""   : : :"memory")
+#define set_mb(var, value)      ({ (var) = (value); wmb(); })
+
+#ifdef CONFIG_SMP
+#define smp_mb()        mb()
+#define smp_rmb()       rmb()
+#define smp_wmb()       wmb()
+#define smp_read_barrier_depends()      read_barrier_depends()
+#else
+#define smp_mb()        barrier()
+#define smp_rmb()       barrier()
+#define smp_wmb()       barrier()
+#define smp_read_barrier_depends()      do { } while(0)
+#endif
+
+#define read_barrier_depends()  ((void)0)
+
+#define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+#ifndef CONFIG_RMW_INSNS
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+  unsigned long tmp, flags;
+
+  local_irq_save(flags);
+
+  switch (size) {
+  case 1:
+    __asm__ __volatile__
+    ("moveb %2,%0\n\t"
+     "moveb %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 2:
+    __asm__ __volatile__
+    ("movew %2,%0\n\t"
+     "movew %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  case 4:
+    __asm__ __volatile__
+    ("movel %2,%0\n\t"
+     "movel %1,%2"
+    : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
+    break;
+  }
+  local_irq_restore(flags);
+  return tmp;
+}
+#else
+static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
+{
+        switch (size) {
+            case 1:
+                __asm__ __volatile__
+                        ("moveb %2,%0\n\t"
+                         "1:\n\t"
+                         "casb %0,%1,%2\n\t"
+                         "jne 1b"
+                         : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+                break;
+            case 2:
+                __asm__ __volatile__
+                        ("movew %2,%0\n\t"
+                         "1:\n\t"
+                         "casw %0,%1,%2\n\t"
+                         "jne 1b"
+                         : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+                break;
+            case 4:
+                __asm__ __volatile__
+                        ("movel %2,%0\n\t"
+                         "1:\n\t"
+                         "casl %0,%1,%2\n\t"
+                         "jne 1b"
+                         : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
+                break;
+        }
+        return x;
+}
+#endif
+
+#include <asm-generic/cmpxchg-local.h>
+
+/*
+ * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
+ * them available.
+ */
+#define cmpxchg_local(ptr, o, n)                                               \
+        ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
+                        (unsigned long)(n), sizeof(*(ptr))))
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#ifndef CONFIG_SMP
+#include <asm-generic/cmpxchg.h>
+#endif
+
+#if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
+        defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
+#define HARD_RESET_NOW() ({             \
+        local_irq_disable();            \
+        asm("                           \
+        moveal #0x10c00000, %a0;        \
+        moveb #0, 0xFFFFF300;           \
+        moveal 0(%a0), %sp;             \
+        moveal 4(%a0), %a0;             \
+        jmp (%a0);                      \
+        ");                             \
+})
+#endif
+
+#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
+/*
+ * Need to account for broken early mask of 5272 silicon. So don't
+ * jump through the original start address. Jump strait into the
+ * known start of the FLASH code.
+ */
+#define HARD_RESET_NOW() ({             \
+        asm("                           \
+        movew #0x2700, %sr;             \
+        jmp 0xf0000400;                 \
+        ");                             \
+})
+#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
+      defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
+#define HARD_RESET_NOW() ({             \
+        asm("                           \
+        movew #0x2700, %sr;             \
+        moveal #0x10000044, %a0;        \
+        movel #0xffffffff, (%a0);       \
+        moveal #0x10000001, %a0;        \
+        moveb #0x00, (%a0);             \
+        moveal #0xf0000004, %a0;        \
+        moveal (%a0), %a0;              \
+        jmp (%a0);                      \
+        ");                             \
+})
+#elif defined(CONFIG_M5272)
+/*
+ * Retrieve the boot address in flash using CSBR0 and CSOR0
+ * find the reset vector at flash_address + 4 (e.g. 0x400)
+ * remap it in the flash's current location (e.g. 0xf0000400)
+ * and jump there.
+ */ 
+#define HARD_RESET_NOW() ({             \
+        asm("                           \
+        movew #0x2700, %%sr;            \
+        move.l  %0+0x40,%%d0;           \
+        and.l   %0+0x44,%%d0;           \
+        andi.l  #0xfffff000,%%d0;       \
+        mov.l   %%d0,%%a0;              \
+        or.l    4(%%a0),%%d0;           \
+        mov.l   %%d0,%%a0;              \
+        jmp (%%a0);"                    \
+        : /* No output */               \
+        : "o" (*(char *)MCF_MBAR) );    \
+})
+#elif defined(CONFIG_M528x)
+/*
+ * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
+ * that when set, resets the MCF528x.
+ */
+#define HARD_RESET_NOW() \
+({                                              \
+        unsigned char volatile *reset;          \
+        asm("move.w     #0x2700, %sr");         \
+        reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000));    \
+        while(1)                                \
+        *reset |= (0x01 << 7);\
+})
+#elif defined(CONFIG_M523x)
+#define HARD_RESET_NOW() ({             \
+        asm("                           \
+        movew #0x2700, %sr;             \
+        movel #0x01000000, %sp;         \
+        moveal #0x40110000, %a0;        \
+        moveb #0x80, (%a0);             \
+        ");                             \
+})
+#elif defined(CONFIG_M520x)
+        /*
+         * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register 
+         * RCR), that when set, resets the MCF5208.
+         */
+#define HARD_RESET_NOW()                \
+({                                      \
+        unsigned char volatile *reset;  \
+        asm("move.w     #0x2700, %sr"); \
+        reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000));     \
+        while(1)                        \
+                *reset |= 0x80;         \
+})
+#else
+#define HARD_RESET_NOW() ({             \
+        asm("                           \
+        movew #0x2700, %sr;             \
+        moveal #0x4, %a0;               \
+        moveal (%a0), %a0;              \
+        jmp (%a0);                      \
+        ");                             \
+})
+#endif
+#endif
+#define arch_align_stack(x) (x)
+
+
+static inline int irqs_disabled_flags(unsigned long flags)
+{
+        if (flags & 0x0700)
+                return 0;
+        else
+                return 1;
+}
+
+#endif /* _M68KNOMMU_SYSTEM_H */
diff --git a/arch/m68k/include/asm/termbits.h b/arch/m68k/include/asm/termbits.h
new file mode 100644
index 000000000000..8c14170996bb
--- /dev/null
+++ b/arch/m68k/include/asm/termbits.h
@@ -0,0 +1,200 @@
+#ifndef __ARCH_M68K_TERMBITS_H__
+#define __ARCH_M68K_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char   cc_t;
+typedef unsigned int    speed_t;
+typedef unsigned int    tcflag_t;
+
+#define NCCS 19
+struct termios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+};
+
+struct termios2 {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+struct ktermios {
+        tcflag_t c_iflag;               /* input mode flags */
+        tcflag_t c_oflag;               /* output mode flags */
+        tcflag_t c_cflag;               /* control mode flags */
+        tcflag_t c_lflag;               /* local mode flags */
+        cc_t c_line;                    /* line discipline */
+        cc_t c_cc[NCCS];                /* control characters */
+        speed_t c_ispeed;               /* input speed */
+        speed_t c_ospeed;               /* output speed */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK  0000001
+#define BRKINT  0000002
+#define IGNPAR  0000004
+#define PARMRK  0000010
+#define INPCK   0000020
+#define ISTRIP  0000040
+#define INLCR   0000100
+#define IGNCR   0000200
+#define ICRNL   0000400
+#define IUCLC   0001000
+#define IXON    0002000
+#define IXANY   0004000
+#define IXOFF   0010000
+#define IMAXBEL 0020000
+#define IUTF8   0040000
+
+/* c_oflag bits */
+#define OPOST   0000001
+#define OLCUC   0000002
+#define ONLCR   0000004
+#define OCRNL   0000010
+#define ONOCR   0000020
+#define ONLRET  0000040
+#define OFILL   0000100
+#define OFDEL   0000200
+#define NLDLY   0000400
+#define   NL0   0000000
+#define   NL1   0000400
+#define CRDLY   0003000
+#define   CR0   0000000
+#define   CR1   0001000
+#define   CR2   0002000
+#define   CR3   0003000
+#define TABDLY  0014000
+#define   TAB0  0000000
+#define   TAB1  0004000
+#define   TAB2  0010000
+#define   TAB3  0014000
+#define   XTABS 0014000
+#define BSDLY   0020000
+#define   BS0   0000000
+#define   BS1   0020000
+#define VTDLY   0040000
+#define   VT0   0000000
+#define   VT1   0040000
+#define FFDLY   0100000
+#define   FF0   0000000
+#define   FF1   0100000
+
+/* c_cflag bit meaning */
+#define CBAUD   0010017
+#define  B0     0000000         /* hang up */
+#define  B50    0000001
+#define  B75    0000002
+#define  B110   0000003
+#define  B134   0000004
+#define  B150   0000005
+#define  B200   0000006
+#define  B300   0000007
+#define  B600   0000010
+#define  B1200  0000011
+#define  B1800  0000012
+#define  B2400  0000013
+#define  B4800  0000014
+#define  B9600  0000015
+#define  B19200 0000016
+#define  B38400 0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE   0000060
+#define   CS5   0000000
+#define   CS6   0000020
+#define   CS7   0000040
+#define   CS8   0000060
+#define CSTOPB  0000100
+#define CREAD   0000200
+#define PARENB  0000400
+#define PARODD  0001000
+#define HUPCL   0002000
+#define CLOCAL  0004000
+#define CBAUDEX 0010000
+#define    BOTHER 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD    002003600000          /* input baud rate */
+#define CMSPAR    010000000000          /* mark or space (stick) parity */
+#define CRTSCTS   020000000000          /* flow control */
+
+#define IBSHIFT 16                      /* Shift from CBAUD to CIBAUD */
+
+/* c_lflag bits */
+#define ISIG    0000001
+#define ICANON  0000002
+#define XCASE   0000004
+#define ECHO    0000010
+#define ECHOE   0000020
+#define ECHOK   0000040
+#define ECHONL  0000100
+#define NOFLSH  0000200
+#define TOSTOP  0000400
+#define ECHOCTL 0001000
+#define ECHOPRT 0002000
+#define ECHOKE  0004000
+#define FLUSHO  0010000
+#define PENDIN  0040000
+#define IEXTEN  0100000
+
+
+/* tcflow() and TCXONC use these */
+#define TCOOFF          0
+#define TCOON           1
+#define TCIOFF          2
+#define TCION           3
+
+/* tcflush() and TCFLSH use these */
+#define TCIFLUSH        0
+#define TCOFLUSH        1
+#define TCIOFLUSH       2
+
+/* tcsetattr uses these */
+#define TCSANOW         0
+#define TCSADRAIN       1
+#define TCSAFLUSH       2
+
+#endif /* __ARCH_M68K_TERMBITS_H__ */
diff --git a/arch/m68k/include/asm/termios.h b/arch/m68k/include/asm/termios.h
new file mode 100644
index 000000000000..0823032e4045
--- /dev/null
+++ b/arch/m68k/include/asm/termios.h
@@ -0,0 +1,92 @@
+#ifndef _M68K_TERMIOS_H
+#define _M68K_TERMIOS_H
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+        unsigned short ws_row;
+        unsigned short ws_col;
+        unsigned short ws_xpixel;
+        unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+        unsigned short c_iflag;         /* input mode flags */
+        unsigned short c_oflag;         /* output mode flags */
+        unsigned short c_cflag;         /* control mode flags */
+        unsigned short c_lflag;         /* local mode flags */
+        unsigned char c_line;           /* line discipline */
+        unsigned char c_cc[NCC];        /* control characters */
+};
+
+#ifdef __KERNEL__
+/*      intr=^C         quit=^|         erase=del       kill=^U
+        eof=^D          vtime=\0        vmin=\1         sxtc=\0
+        start=^Q        stop=^S         susp=^Z         eol=\0
+        reprint=^R      discard=^U      werase=^W       lnext=^V
+        eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+#endif
+
+/* modem lines */
+#define TIOCM_LE        0x001
+#define TIOCM_DTR       0x002
+#define TIOCM_RTS       0x004
+#define TIOCM_ST        0x008
+#define TIOCM_SR        0x010
+#define TIOCM_CTS       0x020
+#define TIOCM_CAR       0x040
+#define TIOCM_RNG       0x080
+#define TIOCM_DSR       0x100
+#define TIOCM_CD        TIOCM_CAR
+#define TIOCM_RI        TIOCM_RNG
+#define TIOCM_OUT1      0x2000
+#define TIOCM_OUT2      0x4000
+#define TIOCM_LOOP      0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+#ifdef __KERNEL__
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+        unsigned short tmp; \
+        get_user(tmp, &(termio)->c_iflag); \
+        (termios)->c_iflag = (0xffff0000 & ((termios)->c_iflag)) | tmp; \
+        get_user(tmp, &(termio)->c_oflag); \
+        (termios)->c_oflag = (0xffff0000 & ((termios)->c_oflag)) | tmp; \
+        get_user(tmp, &(termio)->c_cflag); \
+        (termios)->c_cflag = (0xffff0000 & ((termios)->c_cflag)) | tmp; \
+        get_user(tmp, &(termio)->c_lflag); \
+        (termios)->c_lflag = (0xffff0000 & ((termios)->c_lflag)) | tmp; \
+        get_user((termios)->c_line, &(termio)->c_line); \
+        copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+        put_user((termios)->c_iflag, &(termio)->c_iflag); \
+        put_user((termios)->c_oflag, &(termio)->c_oflag); \
+        put_user((termios)->c_cflag, &(termio)->c_cflag); \
+        put_user((termios)->c_lflag, &(termio)->c_lflag); \
+        put_user((termios)->c_line,  &(termio)->c_line); \
+        copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif  /* __KERNEL__ */
+
+#endif /* _M68K_TERMIOS_H */
diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h
new file mode 100644
index 000000000000..f31a3f42b7b3
--- /dev/null
+++ b/arch/m68k/include/asm/thread_info.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "thread_info_no.h"
+#else
+#include "thread_info_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/thread_info_mm.h b/arch/m68k/include/asm/thread_info_mm.h
new file mode 100644
index 000000000000..af0fda46e94b
--- /dev/null
+++ b/arch/m68k/include/asm/thread_info_mm.h
@@ -0,0 +1,57 @@
+#ifndef _ASM_M68K_THREAD_INFO_H
+#define _ASM_M68K_THREAD_INFO_H
+
+#include <asm/types.h>
+#include <asm/page.h>
+
+struct thread_info {
+        struct task_struct      *task;          /* main task structure */
+        unsigned long           flags;
+        struct exec_domain      *exec_domain;   /* execution domain */
+        int                     preempt_count;  /* 0 => preemptable, <0 => BUG */
+        __u32 cpu; /* should always be 0 on m68k */
+        struct restart_block    restart_block;
+};
+
+#define PREEMPT_ACTIVE          0x4000000
+
+#define INIT_THREAD_INFO(tsk)                   \
+{                                               \
+        .task           = &tsk,                 \
+        .exec_domain    = &default_exec_domain, \
+        .restart_block = {                      \
+                .fn = do_no_restart_syscall,    \
+        },                                      \
+}
+
+/* THREAD_SIZE should be 8k, so handle differently for 4k and 8k machines */
+#define THREAD_SIZE_ORDER (13 - PAGE_SHIFT)
+
+#define init_thread_info        (init_task.thread.info)
+#define init_stack              (init_thread_union.stack)
+
+#define task_thread_info(tsk)   (&(tsk)->thread.info)
+#define task_stack_page(tsk)    ((tsk)->stack)
+#define current_thread_info()   task_thread_info(current)
+
+#define __HAVE_THREAD_FUNCTIONS
+
+#define setup_thread_stack(p, org) ({                   \
+        *(struct task_struct **)(p)->stack = (p);       \
+        task_thread_info(p)->task = (p);                \
+})
+
+#define end_of_stack(p) ((unsigned long *)(p)->stack + 1)
+
+/* entry.S relies on these definitions!
+ * bits 0-7 are tested at every exception exit
+ * bits 8-15 are also tested at syscall exit
+ */
+#define TIF_SIGPENDING          6       /* signal pending */
+#define TIF_NEED_RESCHED        7       /* rescheduling necessary */
+#define TIF_DELAYED_TRACE       14      /* single step a syscall */
+#define TIF_SYSCALL_TRACE       15      /* syscall trace active */
+#define TIF_MEMDIE              16
+#define TIF_FREEZE              17      /* thread is freezing for suspend */
+
+#endif  /* _ASM_M68K_THREAD_INFO_H */
diff --git a/arch/m68k/include/asm/thread_info_no.h b/arch/m68k/include/asm/thread_info_no.h
new file mode 100644
index 000000000000..82529f424ea3
--- /dev/null
+++ b/arch/m68k/include/asm/thread_info_no.h
@@ -0,0 +1,100 @@
+/* thread_info.h: m68knommu low-level thread information
+ * adapted from the i386 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ *
+ * Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ * - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ */
+
+#ifndef _ASM_THREAD_INFO_H
+#define _ASM_THREAD_INFO_H
+
+#include <asm/page.h>
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Size of kernel stack for each process. This must be a power of 2...
+ */
+#ifdef CONFIG_4KSTACKS
+#define THREAD_SIZE_ORDER (0)
+#else
+#define THREAD_SIZE_ORDER (1)
+#endif
+                                                                                
+/*
+ * for asm files, THREAD_SIZE is now generated by asm-offsets.c
+ */
+#define THREAD_SIZE (PAGE_SIZE<<THREAD_SIZE_ORDER)
+
+/*
+ * low level task data.
+ */
+struct thread_info {
+        struct task_struct *task;               /* main task structure */
+        struct exec_domain *exec_domain;        /* execution domain */
+        unsigned long      flags;               /* low level flags */
+        int                cpu;                 /* cpu we're on */
+        int                preempt_count;       /* 0 => preemptable, <0 => BUG */
+        struct restart_block restart_block;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+#define INIT_THREAD_INFO(tsk)                   \
+{                                               \
+        .task           = &tsk,                 \
+        .exec_domain    = &default_exec_domain, \
+        .flags          = 0,                    \
+        .cpu            = 0,                    \
+        .restart_block  = {                     \
+                .fn = do_no_restart_syscall,    \
+        },                                      \
+}
+
+#define init_thread_info        (init_thread_union.thread_info)
+#define init_stack              (init_thread_union.stack)
+
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+        struct thread_info *ti;
+        __asm__(
+                "move.l %%sp, %0 \n\t"
+                "and.l  %1, %0"
+                : "=&d"(ti)
+                : "di" (~(THREAD_SIZE-1))
+                );
+        return ti;
+}
+
+#endif /* __ASSEMBLY__ */
+
+#define PREEMPT_ACTIVE  0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE       0       /* syscall trace active */
+#define TIF_SIGPENDING          1       /* signal pending */
+#define TIF_NEED_RESCHED        2       /* rescheduling necessary */
+#define TIF_POLLING_NRFLAG      3       /* true if poll_idle() is polling
+                                           TIF_NEED_RESCHED */
+#define TIF_MEMDIE              4
+#define TIF_FREEZE              16      /* is freezing for suspend */
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE      (1<<TIF_SYSCALL_TRACE)
+#define _TIF_SIGPENDING         (1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED       (1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG     (1<<TIF_POLLING_NRFLAG)
+#define _TIF_FREEZE             (1<<TIF_FREEZE)
+
+#define _TIF_WORK_MASK          0x0000FFFE      /* work to do on interrupt/exception return */
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h
new file mode 100644
index 000000000000..719762980578
--- /dev/null
+++ b/arch/m68k/include/asm/timex.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "timex_no.h"
+#else
+#include "timex_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/timex_mm.h b/arch/m68k/include/asm/timex_mm.h
new file mode 100644
index 000000000000..b87f2f278f67
--- /dev/null
+++ b/arch/m68k/include/asm/timex_mm.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-m68k/timex.h
+ *
+ * m68k architecture timex specifications
+ */
+#ifndef _ASMm68k_TIMEX_H
+#define _ASMm68k_TIMEX_H
+
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+        return 0;
+}
+
+#endif
diff --git a/arch/m68k/include/asm/timex_no.h b/arch/m68k/include/asm/timex_no.h
new file mode 100644
index 000000000000..109050f3fe91
--- /dev/null
+++ b/arch/m68k/include/asm/timex_no.h
@@ -0,0 +1,23 @@
+/*
+ * linux/include/asm-m68knommu/timex.h
+ *
+ * m68knommu architecture timex specifications
+ */
+#ifndef _ASM_M68KNOMMU_TIMEX_H
+#define _ASM_M68KNOMMU_TIMEX_H
+
+#ifdef CONFIG_COLDFIRE
+#include <asm/coldfire.h>
+#define CLOCK_TICK_RATE MCF_CLK
+#else
+#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
+#endif
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+        return 0;
+}
+
+#endif
diff --git a/arch/m68k/include/asm/tlb.h b/arch/m68k/include/asm/tlb.h
new file mode 100644
index 000000000000..1785cff73449
--- /dev/null
+++ b/arch/m68k/include/asm/tlb.h
@@ -0,0 +1,20 @@
+#ifndef _M68K_TLB_H
+#define _M68K_TLB_H
+
+/*
+ * m68k doesn't need any special per-pte or
+ * per-vma handling..
+ */
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#define tlb_end_vma(tlb, vma)   do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address)      do { } while (0)
+
+/*
+ * .. because we flush the whole mm when it
+ * fills up.
+ */
+#define tlb_flush(tlb)          flush_tlb_mm((tlb)->mm)
+
+#include <asm-generic/tlb.h>
+
+#endif /* _M68K_TLB_H */
diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h
new file mode 100644
index 000000000000..b6f93b30951e
--- /dev/null
+++ b/arch/m68k/include/asm/tlbflush.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "tlbflush_no.h"
+#else
+#include "tlbflush_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/tlbflush_mm.h b/arch/m68k/include/asm/tlbflush_mm.h
new file mode 100644
index 000000000000..acb6bf21a321
--- /dev/null
+++ b/arch/m68k/include/asm/tlbflush_mm.h
@@ -0,0 +1,219 @@
+#ifndef _M68K_TLBFLUSH_H
+#define _M68K_TLBFLUSH_H
+
+
+#ifndef CONFIG_SUN3
+
+#include <asm/current.h>
+
+static inline void flush_tlb_kernel_page(void *addr)
+{
+        if (CPU_IS_040_OR_060) {
+                mm_segment_t old_fs = get_fs();
+                set_fs(KERNEL_DS);
+                __asm__ __volatile__(".chip 68040\n\t"
+                                     "pflush (%0)\n\t"
+                                     ".chip 68k"
+                                     : : "a" (addr));
+                set_fs(old_fs);
+        } else if (CPU_IS_020_OR_030)
+                __asm__ __volatile__("pflush #4,#4,(%0)" : : "a" (addr));
+}
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+        if (CPU_IS_040_OR_060)
+                __asm__ __volatile__(".chip 68040\n\t"
+                                     "pflushan\n\t"
+                                     ".chip 68k");
+        else if (CPU_IS_020_OR_030)
+                __asm__ __volatile__("pflush #0,#4");
+}
+
+static inline void __flush_tlb040_one(unsigned long addr)
+{
+        __asm__ __volatile__(".chip 68040\n\t"
+                             "pflush (%0)\n\t"
+                             ".chip 68k"
+                             : : "a" (addr));
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+        if (CPU_IS_040_OR_060)
+                __flush_tlb040_one(addr);
+        else if (CPU_IS_020_OR_030)
+                __asm__ __volatile__("pflush #0,#4,(%0)" : : "a" (addr));
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+        if (CPU_IS_040_OR_060)
+                __asm__ __volatile__(".chip 68040\n\t"
+                                     "pflusha\n\t"
+                                     ".chip 68k");
+        else if (CPU_IS_020_OR_030)
+                __asm__ __volatile__("pflusha");
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+        if (mm == current->active_mm)
+                __flush_tlb();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+        if (vma->vm_mm == current->active_mm) {
+                mm_segment_t old_fs = get_fs();
+                set_fs(USER_DS);
+                __flush_tlb_one(addr);
+                set_fs(old_fs);
+        }
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+                                   unsigned long start, unsigned long end)
+{
+        if (vma->vm_mm == current->active_mm)
+                __flush_tlb();
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+        flush_tlb_all();
+}
+
+#else
+
+
+/* Reserved PMEGs. */
+extern char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
+extern unsigned long pmeg_vaddr[SUN3_PMEGS_NUM];
+extern unsigned char pmeg_alloc[SUN3_PMEGS_NUM];
+extern unsigned char pmeg_ctx[SUN3_PMEGS_NUM];
+
+/* Flush all userspace mappings one by one...  (why no flush command,
+   sun?) */
+static inline void flush_tlb_all(void)
+{
+       unsigned long addr;
+       unsigned char ctx, oldctx;
+
+       oldctx = sun3_get_context();
+       for(addr = 0x00000000; addr < TASK_SIZE; addr += SUN3_PMEG_SIZE) {
+               for(ctx = 0; ctx < 8; ctx++) {
+                       sun3_put_context(ctx);
+                       sun3_put_segmap(addr, SUN3_INVALID_PMEG);
+               }
+       }
+
+       sun3_put_context(oldctx);
+       /* erase all of the userspace pmeg maps, we've clobbered them
+          all anyway */
+       for(addr = 0; addr < SUN3_INVALID_PMEG; addr++) {
+               if(pmeg_alloc[addr] == 1) {
+                       pmeg_alloc[addr] = 0;
+                       pmeg_ctx[addr] = 0;
+                       pmeg_vaddr[addr] = 0;
+               }
+       }
+
+}
+
+/* Clear user TLB entries within the context named in mm */
+static inline void flush_tlb_mm (struct mm_struct *mm)
+{
+     unsigned char oldctx;
+     unsigned char seg;
+     unsigned long i;
+
+     oldctx = sun3_get_context();
+     sun3_put_context(mm->context);
+
+     for(i = 0; i < TASK_SIZE; i += SUN3_PMEG_SIZE) {
+             seg = sun3_get_segmap(i);
+             if(seg == SUN3_INVALID_PMEG)
+                     continue;
+
+             sun3_put_segmap(i, SUN3_INVALID_PMEG);
+             pmeg_alloc[seg] = 0;
+             pmeg_ctx[seg] = 0;
+             pmeg_vaddr[seg] = 0;
+     }
+
+     sun3_put_context(oldctx);
+
+}
+
+/* Flush a single TLB page. In this case, we're limited to flushing a
+   single PMEG */
+static inline void flush_tlb_page (struct vm_area_struct *vma,
+                                   unsigned long addr)
+{
+        unsigned char oldctx;
+        unsigned char i;
+
+        oldctx = sun3_get_context();
+        sun3_put_context(vma->vm_mm->context);
+        addr &= ~SUN3_PMEG_MASK;
+        if((i = sun3_get_segmap(addr)) != SUN3_INVALID_PMEG)
+        {
+                pmeg_alloc[i] = 0;
+                pmeg_ctx[i] = 0;
+                pmeg_vaddr[i] = 0;
+                sun3_put_segmap (addr,  SUN3_INVALID_PMEG);
+        }
+        sun3_put_context(oldctx);
+
+}
+/* Flush a range of pages from TLB. */
+
+static inline void flush_tlb_range (struct vm_area_struct *vma,
+                      unsigned long start, unsigned long end)
+{
+        struct mm_struct *mm = vma->vm_mm;
+        unsigned char seg, oldctx;
+
+        start &= ~SUN3_PMEG_MASK;
+
+        oldctx = sun3_get_context();
+        sun3_put_context(mm->context);
+
+        while(start < end)
+        {
+                if((seg = sun3_get_segmap(start)) == SUN3_INVALID_PMEG)
+                     goto next;
+                if(pmeg_ctx[seg] == mm->context) {
+                        pmeg_alloc[seg] = 0;
+                        pmeg_ctx[seg] = 0;
+                        pmeg_vaddr[seg] = 0;
+                }
+                sun3_put_segmap(start, SUN3_INVALID_PMEG);
+        next:
+                start += SUN3_PMEG_SIZE;
+        }
+}
+
+static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+        flush_tlb_all();
+}
+
+/* Flush kernel page from TLB. */
+static inline void flush_tlb_kernel_page (unsigned long addr)
+{
+        sun3_put_segmap (addr & ~(SUN3_PMEG_SIZE - 1), SUN3_INVALID_PMEG);
+}
+
+#endif
+
+#endif /* _M68K_TLBFLUSH_H */
diff --git a/arch/m68k/include/asm/tlbflush_no.h b/arch/m68k/include/asm/tlbflush_no.h
new file mode 100644
index 000000000000..a470cfb803eb
--- /dev/null
+++ b/arch/m68k/include/asm/tlbflush_no.h
@@ -0,0 +1,55 @@
+#ifndef _M68KNOMMU_TLBFLUSH_H
+#define _M68KNOMMU_TLBFLUSH_H
+
+/*
+ * Copyright (C) 2000 Lineo, David McCullough <davidm@uclinux.org>
+ * Copyright (C) 2000-2002, Greg Ungerer <gerg@snapgear.com>
+ */
+
+#include <asm/setup.h>
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+        BUG();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+        BUG();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+        BUG();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+        BUG();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+        BUG();
+}
+
+static inline void flush_tlb_range(struct mm_struct *mm,
+                                   unsigned long start, unsigned long end)
+{
+        BUG();
+}
+
+static inline void flush_tlb_kernel_page(unsigned long addr)
+{
+        BUG();
+}
+
+#endif /* _M68KNOMMU_TLBFLUSH_H */
diff --git a/arch/m68k/include/asm/topology.h b/arch/m68k/include/asm/topology.h
new file mode 100644
index 000000000000..ca173e9f26ff
--- /dev/null
+++ b/arch/m68k/include/asm/topology.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_M68K_TOPOLOGY_H
+#define _ASM_M68K_TOPOLOGY_H
+
+#include <asm-generic/topology.h>
+
+#endif /* _ASM_M68K_TOPOLOGY_H */
diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h
new file mode 100644
index 000000000000..3011ec0f5365
--- /dev/null
+++ b/arch/m68k/include/asm/traps.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "traps_no.h"
+#else
+#include "traps_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/traps_mm.h b/arch/m68k/include/asm/traps_mm.h
new file mode 100644
index 000000000000..8caef25624c7
--- /dev/null
+++ b/arch/m68k/include/asm/traps_mm.h
@@ -0,0 +1,272 @@
+/*
+ *  linux/include/asm/traps.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68K_TRAPS_H
+#define _M68K_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+typedef void (*e_vector)(void);
+
+asmlinkage void auto_inthandler(void);
+asmlinkage void user_inthandler(void);
+asmlinkage void bad_inthandler(void);
+
+extern e_vector vectors[];
+
+#endif
+
+#define VEC_RESETSP (0)
+#define VEC_RESETPC (1)
+#define VEC_BUSERR  (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK     (6)
+#define VEC_TRAP    (7)
+#define VEC_PRIV    (8)
+#define VEC_TRACE   (9)
+#define VEC_LINE10  (10)
+#define VEC_LINE11  (11)
+#define VEC_RESV12  (12)
+#define VEC_COPROC  (13)
+#define VEC_FORMAT  (14)
+#define VEC_UNINT   (15)
+#define VEC_RESV16  (16)
+#define VEC_RESV17  (17)
+#define VEC_RESV18  (18)
+#define VEC_RESV19  (19)
+#define VEC_RESV20  (20)
+#define VEC_RESV21  (21)
+#define VEC_RESV22  (22)
+#define VEC_RESV23  (23)
+#define VEC_SPUR    (24)
+#define VEC_INT1    (25)
+#define VEC_INT2    (26)
+#define VEC_INT3    (27)
+#define VEC_INT4    (28)
+#define VEC_INT5    (29)
+#define VEC_INT6    (30)
+#define VEC_INT7    (31)
+#define VEC_SYS     (32)
+#define VEC_TRAP1   (33)
+#define VEC_TRAP2   (34)
+#define VEC_TRAP3   (35)
+#define VEC_TRAP4   (36)
+#define VEC_TRAP5   (37)
+#define VEC_TRAP6   (38)
+#define VEC_TRAP7   (39)
+#define VEC_TRAP8   (40)
+#define VEC_TRAP9   (41)
+#define VEC_TRAP10  (42)
+#define VEC_TRAP11  (43)
+#define VEC_TRAP12  (44)
+#define VEC_TRAP13  (45)
+#define VEC_TRAP14  (46)
+#define VEC_TRAP15  (47)
+#define VEC_FPBRUC  (48)
+#define VEC_FPIR    (49)
+#define VEC_FPDIVZ  (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE    (52)
+#define VEC_FPOVER  (53)
+#define VEC_FPNAN   (54)
+#define VEC_FPUNSUP (55)
+#define VEC_MMUCFG  (56)
+#define VEC_MMUILL  (57)
+#define VEC_MMUACC  (58)
+#define VEC_RESV59  (59)
+#define VEC_UNIMPEA (60)
+#define VEC_UNIMPII (61)
+#define VEC_RESV62  (62)
+#define VEC_RESV63  (63)
+#define VEC_USER    (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T  (0x8000)
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#define PS_C  (0x0001)
+
+/* bits for 68020/68030 special status word */
+
+#define FC    (0x8000)
+#define FB    (0x4000)
+#define RC    (0x2000)
+#define RB    (0x1000)
+#define DF    (0x0100)
+#define RM    (0x0080)
+#define RW    (0x0040)
+#define SZ    (0x0030)
+#define DFC   (0x0007)
+
+/* bits for 68030 MMU status register (mmusr,psr) */
+
+#define MMU_B        (0x8000)    /* bus error */
+#define MMU_L        (0x4000)    /* limit violation */
+#define MMU_S        (0x2000)    /* supervisor violation */
+#define MMU_WP       (0x0800)    /* write-protected */
+#define MMU_I        (0x0400)    /* invalid descriptor */
+#define MMU_M        (0x0200)    /* ATC entry modified */
+#define MMU_T        (0x0040)    /* transparent translation */
+#define MMU_NUM      (0x0007)    /* number of levels traversed */
+
+
+/* bits for 68040 special status word */
+#define CP_040  (0x8000)
+#define CU_040  (0x4000)
+#define CT_040  (0x2000)
+#define CM_040  (0x1000)
+#define MA_040  (0x0800)
+#define ATC_040 (0x0400)
+#define LK_040  (0x0200)
+#define RW_040  (0x0100)
+#define SIZ_040 (0x0060)
+#define TT_040  (0x0018)
+#define TM_040  (0x0007)
+
+/* bits for 68040 write back status word */
+#define WBV_040   (0x80)
+#define WBSIZ_040 (0x60)
+#define WBBYT_040 (0x20)
+#define WBWRD_040 (0x40)
+#define WBLNG_040 (0x00)
+#define WBTT_040  (0x18)
+#define WBTM_040  (0x07)
+
+/* bus access size codes */
+#define BA_SIZE_BYTE    (0x20)
+#define BA_SIZE_WORD    (0x40)
+#define BA_SIZE_LONG    (0x00)
+#define BA_SIZE_LINE    (0x60)
+
+/* bus access transfer type codes */
+#define BA_TT_MOVE16    (0x08)
+
+/* bits for 68040 MMU status register (mmusr) */
+#define MMU_B_040   (0x0800)
+#define MMU_G_040   (0x0400)
+#define MMU_S_040   (0x0080)
+#define MMU_CM_040  (0x0060)
+#define MMU_M_040   (0x0010)
+#define MMU_WP_040  (0x0004)
+#define MMU_T_040   (0x0002)
+#define MMU_R_040   (0x0001)
+
+/* bits in the 68060 fault status long word (FSLW) */
+#define MMU060_MA       (0x08000000)    /* misaligned */
+#define MMU060_LK       (0x02000000)    /* locked transfer */
+#define MMU060_RW       (0x01800000)    /* read/write */
+# define MMU060_RW_W    (0x00800000)    /* write */
+# define MMU060_RW_R    (0x01000000)    /* read */
+# define MMU060_RW_RMW  (0x01800000)    /* read/modify/write */
+# define MMU060_W       (0x00800000)    /* general write, includes rmw */
+#define MMU060_SIZ      (0x00600000)    /* transfer size */
+#define MMU060_TT       (0x00180000)    /* transfer type (TT) bits */
+#define MMU060_TM       (0x00070000)    /* transfer modifier (TM) bits */
+#define MMU060_IO       (0x00008000)    /* instruction or operand */
+#define MMU060_PBE      (0x00004000)    /* push buffer bus error */
+#define MMU060_SBE      (0x00002000)    /* store buffer bus error */
+#define MMU060_PTA      (0x00001000)    /* pointer A fault */
+#define MMU060_PTB      (0x00000800)    /* pointer B fault */
+#define MMU060_IL       (0x00000400)    /* double indirect descr fault */
+#define MMU060_PF       (0x00000200)    /* page fault (invalid descr) */
+#define MMU060_SP       (0x00000100)    /* supervisor protection */
+#define MMU060_WP       (0x00000080)    /* write protection */
+#define MMU060_TWE      (0x00000040)    /* bus error on table search */
+#define MMU060_RE       (0x00000020)    /* bus error on read */
+#define MMU060_WE       (0x00000010)    /* bus error on write */
+#define MMU060_TTR      (0x00000008)    /* error caused by TTR translation */
+#define MMU060_BPE      (0x00000004)    /* branch prediction error */
+#define MMU060_SEE      (0x00000001)    /* software emulated error */
+
+/* cases of missing or invalid descriptors */
+#define MMU060_DESC_ERR (MMU060_PTA | MMU060_PTB | \
+                         MMU060_IL  | MMU060_PF)
+/* bits that indicate real errors */
+#define MMU060_ERR_BITS (MMU060_PBE | MMU060_SBE | MMU060_DESC_ERR | MMU060_SP | \
+                         MMU060_WP  | MMU060_TWE | MMU060_RE       | MMU060_WE)
+
+/* structure for stack frames */
+
+struct frame {
+    struct pt_regs ptregs;
+    union {
+            struct {
+                    unsigned long  iaddr;    /* instruction address */
+            } fmt2;
+            struct {
+                    unsigned long  effaddr;  /* effective address */
+            } fmt3;
+            struct {
+                    unsigned long  effaddr;  /* effective address */
+                    unsigned long  pc;       /* pc of faulted instr */
+            } fmt4;
+            struct {
+                    unsigned long  effaddr;  /* effective address */
+                    unsigned short ssw;      /* special status word */
+                    unsigned short wb3s;     /* write back 3 status */
+                    unsigned short wb2s;     /* write back 2 status */
+                    unsigned short wb1s;     /* write back 1 status */
+                    unsigned long  faddr;    /* fault address */
+                    unsigned long  wb3a;     /* write back 3 address */
+                    unsigned long  wb3d;     /* write back 3 data */
+                    unsigned long  wb2a;     /* write back 2 address */
+                    unsigned long  wb2d;     /* write back 2 data */
+                    unsigned long  wb1a;     /* write back 1 address */
+                    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
+                    unsigned long  pd1;      /* push data 1*/
+                    unsigned long  pd2;      /* push data 2*/
+                    unsigned long  pd3;      /* push data 3*/
+            } fmt7;
+            struct {
+                    unsigned long  iaddr;    /* instruction address */
+                    unsigned short int1[4];  /* internal registers */
+            } fmt9;
+            struct {
+                    unsigned short int1;
+                    unsigned short ssw;      /* special status word */
+                    unsigned short isc;      /* instruction stage c */
+                    unsigned short isb;      /* instruction stage b */
+                    unsigned long  daddr;    /* data cycle fault address */
+                    unsigned short int2[2];
+                    unsigned long  dobuf;    /* data cycle output buffer */
+                    unsigned short int3[2];
+            } fmta;
+            struct {
+                    unsigned short int1;
+                    unsigned short ssw;     /* special status word */
+                    unsigned short isc;     /* instruction stage c */
+                    unsigned short isb;     /* instruction stage b */
+                    unsigned long  daddr;   /* data cycle fault address */
+                    unsigned short int2[2];
+                    unsigned long  dobuf;   /* data cycle output buffer */
+                    unsigned short int3[4];
+                    unsigned long  baddr;   /* stage B address */
+                    unsigned short int4[2];
+                    unsigned long  dibuf;   /* data cycle input buffer */
+                    unsigned short int5[3];
+                    unsigned       ver : 4; /* stack frame version # */
+                    unsigned       int6:12;
+                    unsigned short int7[18];
+            } fmtb;
+    } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68K_TRAPS_H */
diff --git a/arch/m68k/include/asm/traps_no.h b/arch/m68k/include/asm/traps_no.h
new file mode 100644
index 000000000000..d0671e5f8e29
--- /dev/null
+++ b/arch/m68k/include/asm/traps_no.h
@@ -0,0 +1,154 @@
+/*
+ *  linux/include/asm/traps.h
+ *
+ *  Copyright (C) 1993        Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _M68KNOMMU_TRAPS_H
+#define _M68KNOMMU_TRAPS_H
+
+#ifndef __ASSEMBLY__
+
+typedef void (*e_vector)(void);
+
+extern e_vector vectors[];
+extern void init_vectors(void);
+extern void enable_vector(unsigned int irq);
+extern void disable_vector(unsigned int irq);
+extern void ack_vector(unsigned int irq);
+
+#endif
+
+#define VEC_BUSERR  (2)
+#define VEC_ADDRERR (3)
+#define VEC_ILLEGAL (4)
+#define VEC_ZERODIV (5)
+#define VEC_CHK     (6)
+#define VEC_TRAP    (7)
+#define VEC_PRIV    (8)
+#define VEC_TRACE   (9)
+#define VEC_LINE10  (10)
+#define VEC_LINE11  (11)
+#define VEC_RESV1   (12)
+#define VEC_COPROC  (13)
+#define VEC_FORMAT  (14)
+#define VEC_UNINT   (15)
+#define VEC_SPUR    (24)
+#define VEC_INT1    (25)
+#define VEC_INT2    (26)
+#define VEC_INT3    (27)
+#define VEC_INT4    (28)
+#define VEC_INT5    (29)
+#define VEC_INT6    (30)
+#define VEC_INT7    (31)
+#define VEC_SYS     (32)
+#define VEC_TRAP1   (33)
+#define VEC_TRAP2   (34)
+#define VEC_TRAP3   (35)
+#define VEC_TRAP4   (36)
+#define VEC_TRAP5   (37)
+#define VEC_TRAP6   (38)
+#define VEC_TRAP7   (39)
+#define VEC_TRAP8   (40)
+#define VEC_TRAP9   (41)
+#define VEC_TRAP10  (42)
+#define VEC_TRAP11  (43)
+#define VEC_TRAP12  (44)
+#define VEC_TRAP13  (45)
+#define VEC_TRAP14  (46)
+#define VEC_TRAP15  (47)
+#define VEC_FPBRUC  (48)
+#define VEC_FPIR    (49)
+#define VEC_FPDIVZ  (50)
+#define VEC_FPUNDER (51)
+#define VEC_FPOE    (52)
+#define VEC_FPOVER  (53)
+#define VEC_FPNAN   (54)
+#define VEC_FPUNSUP (55)
+#define VEC_UNIMPEA (60)
+#define VEC_UNIMPII (61)
+#define VEC_USER    (64)
+
+#define VECOFF(vec) ((vec)<<2)
+
+#ifndef __ASSEMBLY__
+
+/* Status register bits */
+#define PS_T  (0x8000)
+#define PS_S  (0x2000)
+#define PS_M  (0x1000)
+#define PS_C  (0x0001)
+
+/* structure for stack frames */
+
+struct frame {
+    struct pt_regs ptregs;
+    union {
+            struct {
+                    unsigned long  iaddr;    /* instruction address */
+            } fmt2;
+            struct {
+                    unsigned long  effaddr;  /* effective address */
+            } fmt3;
+            struct {
+                    unsigned long  effaddr;  /* effective address */
+                    unsigned long  pc;       /* pc of faulted instr */
+            } fmt4;
+            struct {
+                    unsigned long  effaddr;  /* effective address */
+                    unsigned short ssw;      /* special status word */
+                    unsigned short wb3s;     /* write back 3 status */
+                    unsigned short wb2s;     /* write back 2 status */
+                    unsigned short wb1s;     /* write back 1 status */
+                    unsigned long  faddr;    /* fault address */
+                    unsigned long  wb3a;     /* write back 3 address */
+                    unsigned long  wb3d;     /* write back 3 data */
+                    unsigned long  wb2a;     /* write back 2 address */
+                    unsigned long  wb2d;     /* write back 2 data */
+                    unsigned long  wb1a;     /* write back 1 address */
+                    unsigned long  wb1dpd0;  /* write back 1 data/push data 0*/
+                    unsigned long  pd1;      /* push data 1*/
+                    unsigned long  pd2;      /* push data 2*/
+                    unsigned long  pd3;      /* push data 3*/
+            } fmt7;
+            struct {
+                    unsigned long  iaddr;    /* instruction address */
+                    unsigned short int1[4];  /* internal registers */
+            } fmt9;
+            struct {
+                    unsigned short int1;
+                    unsigned short ssw;      /* special status word */
+                    unsigned short isc;      /* instruction stage c */
+                    unsigned short isb;      /* instruction stage b */
+                    unsigned long  daddr;    /* data cycle fault address */
+                    unsigned short int2[2];
+                    unsigned long  dobuf;    /* data cycle output buffer */
+                    unsigned short int3[2];
+            } fmta;
+            struct {
+                    unsigned short int1;
+                    unsigned short ssw;     /* special status word */
+                    unsigned short isc;     /* instruction stage c */
+                    unsigned short isb;     /* instruction stage b */
+                    unsigned long  daddr;   /* data cycle fault address */
+                    unsigned short int2[2];
+                    unsigned long  dobuf;   /* data cycle output buffer */
+                    unsigned short int3[4];
+                    unsigned long  baddr;   /* stage B address */
+                    unsigned short int4[2];
+                    unsigned long  dibuf;   /* data cycle input buffer */
+                    unsigned short int5[3];
+                    unsigned       ver : 4; /* stack frame version # */
+                    unsigned       int6:12;
+                    unsigned short int7[18];
+            } fmtb;
+    } un;
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _M68KNOMMU_TRAPS_H */
diff --git a/arch/m68k/include/asm/types.h b/arch/m68k/include/asm/types.h
new file mode 100644
index 000000000000..6441cb5f8e7c
--- /dev/null
+++ b/arch/m68k/include/asm/types.h
@@ -0,0 +1,37 @@
+#ifndef _M68K_TYPES_H
+#define _M68K_TYPES_H
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+#include <asm-generic/int-ll64.h>
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned short umode_t;
+
+#endif /* __ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+/* DMA addresses are always 32-bits wide */
+
+typedef u32 dma_addr_t;
+typedef u32 dma64_addr_t;
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* _M68K_TYPES_H */
diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h
new file mode 100644
index 000000000000..38f92dbb9a45
--- /dev/null
+++ b/arch/m68k/include/asm/uaccess.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "uaccess_no.h"
+#else
+#include "uaccess_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h
new file mode 100644
index 000000000000..7107f3fbdbb6
--- /dev/null
+++ b/arch/m68k/include/asm/uaccess_mm.h
@@ -0,0 +1,374 @@
+#ifndef __M68K_UACCESS_H
+#define __M68K_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/compiler.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <asm/segment.h>
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+/* We let the MMU do all checking */
+static inline int access_ok(int type, const void __user *addr,
+                            unsigned long size)
+{
+        return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+extern int __put_user_bad(void);
+extern int __get_user_bad(void);
+
+#define __put_user_asm(res, x, ptr, bwl, reg, err)      \
+asm volatile ("\n"                                      \
+        "1:     moves."#bwl"    %2,%1\n"                \
+        "2:\n"                                          \
+        "       .section .fixup,\"ax\"\n"               \
+        "       .even\n"                                \
+        "10:    moveq.l %3,%0\n"                        \
+        "       jra 2b\n"                               \
+        "       .previous\n"                            \
+        "\n"                                            \
+        "       .section __ex_table,\"a\"\n"            \
+        "       .align  4\n"                            \
+        "       .long   1b,10b\n"                       \
+        "       .long   2b,10b\n"                       \
+        "       .previous"                              \
+        : "+d" (res), "=m" (*(ptr))                     \
+        : #reg (x), "i" (err))
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define __put_user(x, ptr)                                              \
+({                                                                      \
+        typeof(*(ptr)) __pu_val = (x);                                  \
+        int __pu_err = 0;                                               \
+        __chk_user_ptr(ptr);                                            \
+        switch (sizeof (*(ptr))) {                                      \
+        case 1:                                                         \
+                __put_user_asm(__pu_err, __pu_val, ptr, b, d, -EFAULT); \
+                break;                                                  \
+        case 2:                                                         \
+                __put_user_asm(__pu_err, __pu_val, ptr, w, d, -EFAULT); \
+                break;                                                  \
+        case 4:                                                         \
+                __put_user_asm(__pu_err, __pu_val, ptr, l, r, -EFAULT); \
+                break;                                                  \
+        case 8:                                                         \
+            {                                                           \
+                const void __user *__pu_ptr = (ptr);                    \
+                asm volatile ("\n"                                      \
+                        "1:     moves.l %2,(%1)+\n"                     \
+                        "2:     moves.l %R2,(%1)\n"                     \
+                        "3:\n"                                          \
+                        "       .section .fixup,\"ax\"\n"               \
+                        "       .even\n"                                \
+                        "10:    movel %3,%0\n"                          \
+                        "       jra 3b\n"                               \
+                        "       .previous\n"                            \
+                        "\n"                                            \
+                        "       .section __ex_table,\"a\"\n"            \
+                        "       .align 4\n"                             \
+                        "       .long 1b,10b\n"                         \
+                        "       .long 2b,10b\n"                         \
+                        "       .long 3b,10b\n"                         \
+                        "       .previous"                              \
+                        : "+d" (__pu_err), "+a" (__pu_ptr)              \
+                        : "r" (__pu_val), "i" (-EFAULT)                 \
+                        : "memory");                                    \
+                break;                                                  \
+            }                                                           \
+        default:                                                        \
+                __pu_err = __put_user_bad();                            \
+                break;                                                  \
+        }                                                               \
+        __pu_err;                                                       \
+})
+#define put_user(x, ptr)        __put_user(x, ptr)
+
+
+#define __get_user_asm(res, x, ptr, type, bwl, reg, err) ({     \
+        type __gu_val;                                          \
+        asm volatile ("\n"                                      \
+                "1:     moves."#bwl"    %2,%1\n"                \
+                "2:\n"                                          \
+                "       .section .fixup,\"ax\"\n"               \
+                "       .even\n"                                \
+                "10:    move.l  %3,%0\n"                        \
+                "       sub."#bwl"      %1,%1\n"                \
+                "       jra     2b\n"                           \
+                "       .previous\n"                            \
+                "\n"                                            \
+                "       .section __ex_table,\"a\"\n"            \
+                "       .align  4\n"                            \
+                "       .long   1b,10b\n"                       \
+                "       .previous"                              \
+                : "+d" (res), "=&" #reg (__gu_val)              \
+                : "m" (*(ptr)), "i" (err));                     \
+        (x) = (typeof(*(ptr)))(unsigned long)__gu_val;          \
+})
+
+#define __get_user(x, ptr)                                              \
+({                                                                      \
+        int __gu_err = 0;                                               \
+        __chk_user_ptr(ptr);                                            \
+        switch (sizeof(*(ptr))) {                                       \
+        case 1:                                                         \
+                __get_user_asm(__gu_err, x, ptr, u8, b, d, -EFAULT);    \
+                break;                                                  \
+        case 2:                                                         \
+                __get_user_asm(__gu_err, x, ptr, u16, w, d, -EFAULT);   \
+                break;                                                  \
+        case 4:                                                         \
+                __get_user_asm(__gu_err, x, ptr, u32, l, r, -EFAULT);   \
+                break;                                                  \
+/*      case 8: disabled because gcc-4.1 has a broken typeof            \
+            {                                                           \
+                const void *__gu_ptr = (ptr);                           \
+                u64 __gu_val;                                           \
+                asm volatile ("\n"                                      \
+                        "1:     moves.l (%2)+,%1\n"                     \
+                        "2:     moves.l (%2),%R1\n"                     \
+                        "3:\n"                                          \
+                        "       .section .fixup,\"ax\"\n"               \
+                        "       .even\n"                                \
+                        "10:    move.l  %3,%0\n"                        \
+                        "       sub.l   %1,%1\n"                        \
+                        "       sub.l   %R1,%R1\n"                      \
+                        "       jra     3b\n"                           \
+                        "       .previous\n"                            \
+                        "\n"                                            \
+                        "       .section __ex_table,\"a\"\n"            \
+                        "       .align  4\n"                            \
+                        "       .long   1b,10b\n"                       \
+                        "       .long   2b,10b\n"                       \
+                        "       .previous"                              \
+                        : "+d" (__gu_err), "=&r" (__gu_val),            \
+                          "+a" (__gu_ptr)                               \
+                        : "i" (-EFAULT)                                 \
+                        : "memory");                                    \
+                (x) = (typeof(*(ptr)))__gu_val;                         \
+                break;                                                  \
+            }   */                                                      \
+        default:                                                        \
+                __gu_err = __get_user_bad();                            \
+                break;                                                  \
+        }                                                               \
+        __gu_err;                                                       \
+})
+#define get_user(x, ptr) __get_user(x, ptr)
+
+unsigned long __generic_copy_from_user(void *to, const void __user *from, unsigned long n);
+unsigned long __generic_copy_to_user(void __user *to, const void *from, unsigned long n);
+
+#define __constant_copy_from_user_asm(res, to, from, tmp, n, s1, s2, s3)\
+        asm volatile ("\n"                                              \
+                "1:     moves."#s1"     (%2)+,%3\n"                     \
+                "       move."#s1"      %3,(%1)+\n"                     \
+                "2:     moves."#s2"     (%2)+,%3\n"                     \
+                "       move."#s2"      %3,(%1)+\n"                     \
+                "       .ifnc   \""#s3"\",\"\"\n"                       \
+                "3:     moves."#s3"     (%2)+,%3\n"                     \
+                "       move."#s3"      %3,(%1)+\n"                     \
+                "       .endif\n"                                       \
+                "4:\n"                                                  \
+                "       .section __ex_table,\"a\"\n"                    \
+                "       .align  4\n"                                    \
+                "       .long   1b,10f\n"                               \
+                "       .long   2b,20f\n"                               \
+                "       .ifnc   \""#s3"\",\"\"\n"                       \
+                "       .long   3b,30f\n"                               \
+                "       .endif\n"                                       \
+                "       .previous\n"                                    \
+                "\n"                                                    \
+                "       .section .fixup,\"ax\"\n"                       \
+                "       .even\n"                                        \
+                "10:    clr."#s1"       (%1)+\n"                        \
+                "20:    clr."#s2"       (%1)+\n"                        \
+                "       .ifnc   \""#s3"\",\"\"\n"                       \
+                "30:    clr."#s3"       (%1)+\n"                        \
+                "       .endif\n"                                       \
+                "       moveq.l #"#n",%0\n"                             \
+                "       jra     4b\n"                                   \
+                "       .previous\n"                                    \
+                : "+d" (res), "+&a" (to), "+a" (from), "=&d" (tmp)      \
+                : : "memory")
+
+static __always_inline unsigned long
+__constant_copy_from_user(void *to, const void __user *from, unsigned long n)
+{
+        unsigned long res = 0, tmp;
+
+        switch (n) {
+        case 1:
+                __get_user_asm(res, *(u8 *)to, (u8 __user *)from, u8, b, d, 1);
+                break;
+        case 2:
+                __get_user_asm(res, *(u16 *)to, (u16 __user *)from, u16, w, d, 2);
+                break;
+        case 3:
+                __constant_copy_from_user_asm(res, to, from, tmp, 3, w, b,);
+                break;
+        case 4:
+                __get_user_asm(res, *(u32 *)to, (u32 __user *)from, u32, l, r, 4);
+                break;
+        case 5:
+                __constant_copy_from_user_asm(res, to, from, tmp, 5, l, b,);
+                break;
+        case 6:
+                __constant_copy_from_user_asm(res, to, from, tmp, 6, l, w,);
+                break;
+        case 7:
+                __constant_copy_from_user_asm(res, to, from, tmp, 7, l, w, b);
+                break;
+        case 8:
+                __constant_copy_from_user_asm(res, to, from, tmp, 8, l, l,);
+                break;
+        case 9:
+                __constant_copy_from_user_asm(res, to, from, tmp, 9, l, l, b);
+                break;
+        case 10:
+                __constant_copy_from_user_asm(res, to, from, tmp, 10, l, l, w);
+                break;
+        case 12:
+                __constant_copy_from_user_asm(res, to, from, tmp, 12, l, l, l);
+                break;
+        default:
+                /* we limit the inlined version to 3 moves */
+                return __generic_copy_from_user(to, from, n);
+        }
+
+        return res;
+}
+
+#define __constant_copy_to_user_asm(res, to, from, tmp, n, s1, s2, s3)  \
+        asm volatile ("\n"                                              \
+                "       move."#s1"      (%2)+,%3\n"                     \
+                "11:    moves."#s1"     %3,(%1)+\n"                     \
+                "12:    move."#s2"      (%2)+,%3\n"                     \
+                "21:    moves."#s2"     %3,(%1)+\n"                     \
+                "22:\n"                                                 \
+                "       .ifnc   \""#s3"\",\"\"\n"                       \
+                "       move."#s3"      (%2)+,%3\n"                     \
+                "31:    moves."#s3"     %3,(%1)+\n"                     \
+                "32:\n"                                                 \
+                "       .endif\n"                                       \
+                "4:\n"                                                  \
+                "\n"                                                    \
+                "       .section __ex_table,\"a\"\n"                    \
+                "       .align  4\n"                                    \
+                "       .long   11b,5f\n"                               \
+                "       .long   12b,5f\n"                               \
+                "       .long   21b,5f\n"                               \
+                "       .long   22b,5f\n"                               \
+                "       .ifnc   \""#s3"\",\"\"\n"                       \
+                "       .long   31b,5f\n"                               \
+                "       .long   32b,5f\n"                               \
+                "       .endif\n"                                       \
+                "       .previous\n"                                    \
+                "\n"                                                    \
+                "       .section .fixup,\"ax\"\n"                       \
+                "       .even\n"                                        \
+                "5:     moveq.l #"#n",%0\n"                             \
+                "       jra     4b\n"                                   \
+                "       .previous\n"                                    \
+                : "+d" (res), "+a" (to), "+a" (from), "=&d" (tmp)       \
+                : : "memory")
+
+static __always_inline unsigned long
+__constant_copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+        unsigned long res = 0, tmp;
+
+        switch (n) {
+        case 1:
+                __put_user_asm(res, *(u8 *)from, (u8 __user *)to, b, d, 1);
+                break;
+        case 2:
+                __put_user_asm(res, *(u16 *)from, (u16 __user *)to, w, d, 2);
+                break;
+        case 3:
+                __constant_copy_to_user_asm(res, to, from, tmp, 3, w, b,);
+                break;
+        case 4:
+                __put_user_asm(res, *(u32 *)from, (u32 __user *)to, l, r, 4);
+                break;
+        case 5:
+                __constant_copy_to_user_asm(res, to, from, tmp, 5, l, b,);
+                break;
+        case 6:
+                __constant_copy_to_user_asm(res, to, from, tmp, 6, l, w,);
+                break;
+        case 7:
+                __constant_copy_to_user_asm(res, to, from, tmp, 7, l, w, b);
+                break;
+        case 8:
+                __constant_copy_to_user_asm(res, to, from, tmp, 8, l, l,);
+                break;
+        case 9:
+                __constant_copy_to_user_asm(res, to, from, tmp, 9, l, l, b);
+                break;
+        case 10:
+                __constant_copy_to_user_asm(res, to, from, tmp, 10, l, l, w);
+                break;
+        case 12:
+                __constant_copy_to_user_asm(res, to, from, tmp, 12, l, l, l);
+                break;
+        default:
+                /* limit the inlined version to 3 moves */
+                return __generic_copy_to_user(to, from, n);
+        }
+
+        return res;
+}
+
+#define __copy_from_user(to, from, n)           \
+(__builtin_constant_p(n) ?                      \
+ __constant_copy_from_user(to, from, n) :       \
+ __generic_copy_from_user(to, from, n))
+
+#define __copy_to_user(to, from, n)             \
+(__builtin_constant_p(n) ?                      \
+ __constant_copy_to_user(to, from, n) :         \
+ __generic_copy_to_user(to, from, n))
+
+#define __copy_to_user_inatomic         __copy_to_user
+#define __copy_from_user_inatomic       __copy_from_user
+
+#define copy_from_user(to, from, n)     __copy_from_user(to, from, n)
+#define copy_to_user(to, from, n)       __copy_to_user(to, from, n)
+
+long strncpy_from_user(char *dst, const char __user *src, long count);
+long strnlen_user(const char __user *src, long n);
+unsigned long __clear_user(void __user *to, unsigned long n);
+
+#define clear_user      __clear_user
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+#endif /* _M68K_UACCESS_H */
diff --git a/arch/m68k/include/asm/uaccess_no.h b/arch/m68k/include/asm/uaccess_no.h
new file mode 100644
index 000000000000..68bbe9b312f1
--- /dev/null
+++ b/arch/m68k/include/asm/uaccess_no.h
@@ -0,0 +1,181 @@
+#ifndef __M68KNOMMU_UACCESS_H
+#define __M68KNOMMU_UACCESS_H
+
+/*
+ * User space memory access functions
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+
+#define VERIFY_READ     0
+#define VERIFY_WRITE    1
+
+#define access_ok(type,addr,size)       _access_ok((unsigned long)(addr),(size))
+
+/*
+ * It is not enough to just have access_ok check for a real RAM address.
+ * This would disallow the case of code/ro-data running XIP in flash/rom.
+ * Ideally we would check the possible flash ranges too, but that is
+ * currently not so easy.
+ */
+static inline int _access_ok(unsigned long addr, unsigned long size)
+{
+        return 1;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+        unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table(unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+#define put_user(x, ptr)                                \
+({                                                      \
+    int __pu_err = 0;                                   \
+    typeof(*(ptr)) __pu_val = (x);                      \
+    switch (sizeof (*(ptr))) {                          \
+    case 1:                                             \
+        __put_user_asm(__pu_err, __pu_val, ptr, b);     \
+        break;                                          \
+    case 2:                                             \
+        __put_user_asm(__pu_err, __pu_val, ptr, w);     \
+        break;                                          \
+    case 4:                                             \
+        __put_user_asm(__pu_err, __pu_val, ptr, l);     \
+        break;                                          \
+    case 8:                                             \
+        memcpy(ptr, &__pu_val, sizeof (*(ptr))); \
+        break;                                          \
+    default:                                            \
+        __pu_err = __put_user_bad();                    \
+        break;                                          \
+    }                                                   \
+    __pu_err;                                           \
+})
+#define __put_user(x, ptr) put_user(x, ptr)
+
+extern int __put_user_bad(void);
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+
+#define __ptr(x) ((unsigned long *)(x))
+
+#define __put_user_asm(err,x,ptr,bwl)                           \
+        __asm__ ("move" #bwl " %0,%1"                           \
+                : /* no outputs */                                              \
+                :"d" (x),"m" (*__ptr(ptr)) : "memory")
+
+#define get_user(x, ptr)                                        \
+({                                                              \
+    int __gu_err = 0;                                           \
+    typeof(x) __gu_val = 0;                                     \
+    switch (sizeof(*(ptr))) {                                   \
+    case 1:                                                     \
+        __get_user_asm(__gu_err, __gu_val, ptr, b, "=d");       \
+        break;                                                  \
+    case 2:                                                     \
+        __get_user_asm(__gu_err, __gu_val, ptr, w, "=r");       \
+        break;                                                  \
+    case 4:                                                     \
+        __get_user_asm(__gu_err, __gu_val, ptr, l, "=r");       \
+        break;                                                  \
+    case 8:                                                     \
+        memcpy((void *) &__gu_val, ptr, sizeof (*(ptr)));       \
+        break;                                                  \
+    default:                                                    \
+        __gu_val = 0;                                           \
+        __gu_err = __get_user_bad();                            \
+        break;                                                  \
+    }                                                           \
+    (x) = (typeof(*(ptr))) __gu_val;                            \
+    __gu_err;                                                   \
+})
+#define __get_user(x, ptr) get_user(x, ptr)
+
+extern int __get_user_bad(void);
+
+#define __get_user_asm(err,x,ptr,bwl,reg)                       \
+        __asm__ ("move" #bwl " %1,%0"                           \
+                 : "=d" (x)                                     \
+                 : "m" (*__ptr(ptr)))
+
+#define copy_from_user(to, from, n)             (memcpy(to, from, n), 0)
+#define copy_to_user(to, from, n)               (memcpy(to, from, n), 0)
+
+#define __copy_from_user(to, from, n) copy_from_user(to, from, n)
+#define __copy_to_user(to, from, n) copy_to_user(to, from, n)
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_to_user_ret(to,from,n,retval) ({ if (copy_to_user(to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) ({ if (copy_from_user(to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user(char *dst, const char *src, long count)
+{
+        char *tmp;
+        strncpy(dst, src, count);
+        for (tmp = dst; *tmp && count > 0; tmp++, count--)
+                ;
+        return(tmp - dst); /* DAVIDM should we count a NUL ?  check getname */
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user(const char *src, long n)
+{
+        return(strlen(src) + 1); /* DAVIDM make safer */
+}
+
+#define strlen_user(str) strnlen_user(str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+__clear_user(void *to, unsigned long n)
+{
+        memset(to, 0, n);
+        return 0;
+}
+
+#define clear_user(to,n)        __clear_user(to,n)
+
+#endif /* _M68KNOMMU_UACCESS_H */
diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h
new file mode 100644
index 000000000000..b53cd160c0b3
--- /dev/null
+++ b/arch/m68k/include/asm/ucontext.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "ucontext_no.h"
+#else
+#include "ucontext_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/ucontext_mm.h b/arch/m68k/include/asm/ucontext_mm.h
new file mode 100644
index 000000000000..e4e22669edc0
--- /dev/null
+++ b/arch/m68k/include/asm/ucontext_mm.h
@@ -0,0 +1,30 @@
+#ifndef _M68K_UCONTEXT_H
+#define _M68K_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+        int f_fpcntl[3];
+        int f_fpregs[8*3];
+} fpregset_t;
+
+struct mcontext {
+        int version;
+        gregset_t gregs;
+        fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+        unsigned long     uc_flags;
+        struct ucontext  *uc_link;
+        stack_t           uc_stack;
+        struct mcontext   uc_mcontext;
+        unsigned long     uc_filler[80];
+        sigset_t          uc_sigmask;   /* mask last for extensibility */
+};
+
+#endif
diff --git a/arch/m68k/include/asm/ucontext_no.h b/arch/m68k/include/asm/ucontext_no.h
new file mode 100644
index 000000000000..713a27f901cd
--- /dev/null
+++ b/arch/m68k/include/asm/ucontext_no.h
@@ -0,0 +1,32 @@
+#ifndef _M68KNOMMU_UCONTEXT_H
+#define _M68KNOMMU_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 18
+typedef greg_t gregset_t[NGREG];
+
+typedef struct fpregset {
+        int f_pcr;
+        int f_psr;
+        int f_fpiaddr;
+        int f_fpregs[8][3];
+} fpregset_t;
+
+struct mcontext {
+        int version;
+        gregset_t gregs;
+        fpregset_t fpregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+        unsigned long     uc_flags;
+        struct ucontext  *uc_link;
+        stack_t           uc_stack;
+        struct mcontext   uc_mcontext;
+        unsigned long     uc_filler[80];
+        sigset_t          uc_sigmask;   /* mask last for extensibility */
+};
+
+#endif
diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h
new file mode 100644
index 000000000000..c640bba3bdf4
--- /dev/null
+++ b/arch/m68k/include/asm/unaligned.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unaligned_no.h"
+#else
+#include "unaligned_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/unaligned_mm.h b/arch/m68k/include/asm/unaligned_mm.h
new file mode 100644
index 000000000000..77698f2dc33c
--- /dev/null
+++ b/arch/m68k/include/asm/unaligned_mm.h
@@ -0,0 +1,13 @@
+#ifndef _ASM_M68K_UNALIGNED_H
+#define _ASM_M68K_UNALIGNED_H
+
+/*
+ * The m68k can do unaligned accesses itself.
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned   __get_unaligned_be
+#define put_unaligned   __put_unaligned_be
+
+#endif /* _ASM_M68K_UNALIGNED_H */
diff --git a/arch/m68k/include/asm/unaligned_no.h b/arch/m68k/include/asm/unaligned_no.h
new file mode 100644
index 000000000000..eb1ea4cb9a59
--- /dev/null
+++ b/arch/m68k/include/asm/unaligned_no.h
@@ -0,0 +1,25 @@
+#ifndef _ASM_M68KNOMMU_UNALIGNED_H
+#define _ASM_M68KNOMMU_UNALIGNED_H
+
+
+#ifdef CONFIG_COLDFIRE
+#include <linux/unaligned/be_struct.h>
+#include <linux/unaligned/le_byteshift.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned   __get_unaligned_be
+#define put_unaligned   __put_unaligned_be
+
+#else
+/*
+ * The m68k can do unaligned accesses itself. 
+ */
+#include <linux/unaligned/access_ok.h>
+#include <linux/unaligned/generic.h>
+
+#define get_unaligned   __get_unaligned_be
+#define put_unaligned   __put_unaligned_be
+
+#endif
+
+#endif /* _ASM_M68KNOMMU_UNALIGNED_H */
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
new file mode 100644
index 000000000000..df1d9d4cb1fd
--- /dev/null
+++ b/arch/m68k/include/asm/unistd.h
@@ -0,0 +1,5 @@
+#ifdef __uClinux__
+#include "unistd_no.h"
+#else
+#include "unistd_mm.h"
+#endif
diff --git a/arch/m68k/include/asm/unistd_mm.h b/arch/m68k/include/asm/unistd_mm.h
new file mode 100644
index 000000000000..3c19027331fa
--- /dev/null
+++ b/arch/m68k/include/asm/unistd_mm.h
@@ -0,0 +1,372 @@
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_waitpid              7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_chown               16
+#define __NR_break               17
+#define __NR_oldstat             18
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_oldfstat            28
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_stty                31
+#define __NR_gtty                32
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_ftime               35
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_prof                44
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_lock                53
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_mpx                 56
+#define __NR_setpgid             57
+#define __NR_ulimit              58
+#define __NR_oldolduname         59
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sgetmask            68
+#define __NR_ssetmask            69
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_select              82
+#define __NR_symlink             83
+#define __NR_oldlstat            84
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_profil              98
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_ioperm             101
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_olduname           109
+#define __NR_iopl               /* 110 */ not supported
+#define __NR_vhangup            111
+#define __NR_idle               /* 112 */ Obsolete
+#define __NR_vm86               /* 113 */ not supported
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_cacheflush         123
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+#define __NR_getpagesize        166
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_lchown             182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg            188     /* some people actually want streams */
+#define __NR_putpmsg            189     /* some people actually want streams */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191
+#define __NR_mmap2              192
+#define __NR_truncate64         193
+#define __NR_ftruncate64        194
+#define __NR_stat64             195
+#define __NR_lstat64            196
+#define __NR_fstat64            197
+#define __NR_chown32            198
+#define __NR_getuid32           199
+#define __NR_getgid32           200
+#define __NR_geteuid32          201
+#define __NR_getegid32          202
+#define __NR_setreuid32         203
+#define __NR_setregid32         204
+#define __NR_getgroups32        205
+#define __NR_setgroups32        206
+#define __NR_fchown32           207
+#define __NR_setresuid32        208
+#define __NR_getresuid32        209
+#define __NR_setresgid32        210
+#define __NR_getresgid32        211
+#define __NR_lchown32           212
+#define __NR_setuid32           213
+#define __NR_setgid32           214
+#define __NR_setfsuid32         215
+#define __NR_setfsgid32         216
+#define __NR_pivot_root         217
+#define __NR_getdents64         220
+#define __NR_gettid             221
+#define __NR_tkill              222
+#define __NR_setxattr           223
+#define __NR_lsetxattr          224
+#define __NR_fsetxattr          225
+#define __NR_getxattr           226
+#define __NR_lgetxattr          227
+#define __NR_fgetxattr          228
+#define __NR_listxattr          229
+#define __NR_llistxattr         230
+#define __NR_flistxattr         231
+#define __NR_removexattr        232
+#define __NR_lremovexattr       233
+#define __NR_fremovexattr       234
+#define __NR_futex              235
+#define __NR_sendfile64         236
+#define __NR_mincore            237
+#define __NR_madvise            238
+#define __NR_fcntl64            239
+#define __NR_readahead          240
+#define __NR_io_setup           241
+#define __NR_io_destroy         242
+#define __NR_io_getevents       243
+#define __NR_io_submit          244
+#define __NR_io_cancel          245
+#define __NR_fadvise64          246
+#define __NR_exit_group         247
+#define __NR_lookup_dcookie     248
+#define __NR_epoll_create       249
+#define __NR_epoll_ctl          250
+#define __NR_epoll_wait         251
+#define __NR_remap_file_pages   252
+#define __NR_set_tid_address    253
+#define __NR_timer_create       254
+#define __NR_timer_settime      255
+#define __NR_timer_gettime      256
+#define __NR_timer_getoverrun   257
+#define __NR_timer_delete       258
+#define __NR_clock_settime      259
+#define __NR_clock_gettime      260
+#define __NR_clock_getres       261
+#define __NR_clock_nanosleep    262
+#define __NR_statfs64           263
+#define __NR_fstatfs64          264
+#define __NR_tgkill             265
+#define __NR_utimes             266
+#define __NR_fadvise64_64       267
+#define __NR_mbind              268
+#define __NR_get_mempolicy      269
+#define __NR_set_mempolicy      270
+#define __NR_mq_open            271
+#define __NR_mq_unlink          272
+#define __NR_mq_timedsend       273
+#define __NR_mq_timedreceive    274
+#define __NR_mq_notify          275
+#define __NR_mq_getsetattr      276
+#define __NR_waitid             277
+#define __NR_vserver            278
+#define __NR_add_key            279
+#define __NR_request_key        280
+#define __NR_keyctl             281
+#define __NR_ioprio_set         282
+#define __NR_ioprio_get         283
+#define __NR_inotify_init       284
+#define __NR_inotify_add_watch  285
+#define __NR_inotify_rm_watch   286
+#define __NR_migrate_pages      287
+#define __NR_openat             288
+#define __NR_mkdirat            289
+#define __NR_mknodat            290
+#define __NR_fchownat           291
+#define __NR_futimesat          292
+#define __NR_fstatat64          293
+#define __NR_unlinkat           294
+#define __NR_renameat           295
+#define __NR_linkat             296
+#define __NR_symlinkat          297
+#define __NR_readlinkat         298
+#define __NR_fchmodat           299
+#define __NR_faccessat          300
+#define __NR_pselect6           301
+#define __NR_ppoll              302
+#define __NR_unshare            303
+#define __NR_set_robust_list    304
+#define __NR_get_robust_list    305
+#define __NR_splice             306
+#define __NR_sync_file_range    307
+#define __NR_tee                308
+#define __NR_vmsplice           309
+#define __NR_move_pages         310
+#define __NR_sched_setaffinity  311
+#define __NR_sched_getaffinity  312
+#define __NR_kexec_load         313
+#define __NR_getcpu             314
+#define __NR_epoll_pwait        315
+#define __NR_utimensat          316
+#define __NR_signalfd           317
+#define __NR_timerfd_create     318
+#define __NR_eventfd            319
+#define __NR_fallocate          320
+#define __NR_timerfd_settime    321
+#define __NR_timerfd_gettime    322
+#define __NR_signalfd4          323
+#define __NR_eventfd2           324
+#define __NR_epoll_create1      325
+#define __NR_dup3               326
+#define __NR_pipe2              327
+#define __NR_inotify_init1      328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls             329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/include/asm/unistd_no.h b/arch/m68k/include/asm/unistd_no.h
new file mode 100644
index 000000000000..b034a2f7b444
--- /dev/null
+++ b/arch/m68k/include/asm/unistd_no.h
@@ -0,0 +1,372 @@
+#ifndef _ASM_M68K_UNISTD_H_
+#define _ASM_M68K_UNISTD_H_
+
+/*
+ * This file contains the system call numbers.
+ */
+
+#define __NR_restart_syscall      0
+#define __NR_exit                 1
+#define __NR_fork                 2
+#define __NR_read                 3
+#define __NR_write                4
+#define __NR_open                 5
+#define __NR_close                6
+#define __NR_waitpid              7
+#define __NR_creat                8
+#define __NR_link                 9
+#define __NR_unlink              10
+#define __NR_execve              11
+#define __NR_chdir               12
+#define __NR_time                13
+#define __NR_mknod               14
+#define __NR_chmod               15
+#define __NR_chown               16
+#define __NR_break               17
+#define __NR_oldstat             18
+#define __NR_lseek               19
+#define __NR_getpid              20
+#define __NR_mount               21
+#define __NR_umount              22
+#define __NR_setuid              23
+#define __NR_getuid              24
+#define __NR_stime               25
+#define __NR_ptrace              26
+#define __NR_alarm               27
+#define __NR_oldfstat            28
+#define __NR_pause               29
+#define __NR_utime               30
+#define __NR_stty                31
+#define __NR_gtty                32
+#define __NR_access              33
+#define __NR_nice                34
+#define __NR_ftime               35
+#define __NR_sync                36
+#define __NR_kill                37
+#define __NR_rename              38
+#define __NR_mkdir               39
+#define __NR_rmdir               40
+#define __NR_dup                 41
+#define __NR_pipe                42
+#define __NR_times               43
+#define __NR_prof                44
+#define __NR_brk                 45
+#define __NR_setgid              46
+#define __NR_getgid              47
+#define __NR_signal              48
+#define __NR_geteuid             49
+#define __NR_getegid             50
+#define __NR_acct                51
+#define __NR_umount2             52
+#define __NR_lock                53
+#define __NR_ioctl               54
+#define __NR_fcntl               55
+#define __NR_mpx                 56
+#define __NR_setpgid             57
+#define __NR_ulimit              58
+#define __NR_oldolduname         59
+#define __NR_umask               60
+#define __NR_chroot              61
+#define __NR_ustat               62
+#define __NR_dup2                63
+#define __NR_getppid             64
+#define __NR_getpgrp             65
+#define __NR_setsid              66
+#define __NR_sigaction           67
+#define __NR_sgetmask            68
+#define __NR_ssetmask            69
+#define __NR_setreuid            70
+#define __NR_setregid            71
+#define __NR_sigsuspend          72
+#define __NR_sigpending          73
+#define __NR_sethostname         74
+#define __NR_setrlimit           75
+#define __NR_getrlimit           76
+#define __NR_getrusage           77
+#define __NR_gettimeofday        78
+#define __NR_settimeofday        79
+#define __NR_getgroups           80
+#define __NR_setgroups           81
+#define __NR_select              82
+#define __NR_symlink             83
+#define __NR_oldlstat            84
+#define __NR_readlink            85
+#define __NR_uselib              86
+#define __NR_swapon              87
+#define __NR_reboot              88
+#define __NR_readdir             89
+#define __NR_mmap                90
+#define __NR_munmap              91
+#define __NR_truncate            92
+#define __NR_ftruncate           93
+#define __NR_fchmod              94
+#define __NR_fchown              95
+#define __NR_getpriority         96
+#define __NR_setpriority         97
+#define __NR_profil              98
+#define __NR_statfs              99
+#define __NR_fstatfs            100
+#define __NR_ioperm             101
+#define __NR_socketcall         102
+#define __NR_syslog             103
+#define __NR_setitimer          104
+#define __NR_getitimer          105
+#define __NR_stat               106
+#define __NR_lstat              107
+#define __NR_fstat              108
+#define __NR_olduname           109
+#define __NR_iopl               /* 110 */ not supported
+#define __NR_vhangup            111
+#define __NR_idle               /* 112 */ Obsolete
+#define __NR_vm86               /* 113 */ not supported
+#define __NR_wait4              114
+#define __NR_swapoff            115
+#define __NR_sysinfo            116
+#define __NR_ipc                117
+#define __NR_fsync              118
+#define __NR_sigreturn          119
+#define __NR_clone              120
+#define __NR_setdomainname      121
+#define __NR_uname              122
+#define __NR_cacheflush         123
+#define __NR_adjtimex           124
+#define __NR_mprotect           125
+#define __NR_sigprocmask        126
+#define __NR_create_module      127
+#define __NR_init_module        128
+#define __NR_delete_module      129
+#define __NR_get_kernel_syms    130
+#define __NR_quotactl           131
+#define __NR_getpgid            132
+#define __NR_fchdir             133
+#define __NR_bdflush            134
+#define __NR_sysfs              135
+#define __NR_personality        136
+#define __NR_afs_syscall        137 /* Syscall for Andrew File System */
+#define __NR_setfsuid           138
+#define __NR_setfsgid           139
+#define __NR__llseek            140
+#define __NR_getdents           141
+#define __NR__newselect         142
+#define __NR_flock              143
+#define __NR_msync              144
+#define __NR_readv              145
+#define __NR_writev             146
+#define __NR_getsid             147
+#define __NR_fdatasync          148
+#define __NR__sysctl            149
+#define __NR_mlock              150
+#define __NR_munlock            151
+#define __NR_mlockall           152
+#define __NR_munlockall         153
+#define __NR_sched_setparam             154
+#define __NR_sched_getparam             155
+#define __NR_sched_setscheduler         156
+#define __NR_sched_getscheduler         157
+#define __NR_sched_yield                158
+#define __NR_sched_get_priority_max     159
+#define __NR_sched_get_priority_min     160
+#define __NR_sched_rr_get_interval      161
+#define __NR_nanosleep          162
+#define __NR_mremap             163
+#define __NR_setresuid          164
+#define __NR_getresuid          165
+#define __NR_getpagesize        166
+#define __NR_query_module       167
+#define __NR_poll               168
+#define __NR_nfsservctl         169
+#define __NR_setresgid          170
+#define __NR_getresgid          171
+#define __NR_prctl              172
+#define __NR_rt_sigreturn       173
+#define __NR_rt_sigaction       174
+#define __NR_rt_sigprocmask     175
+#define __NR_rt_sigpending      176
+#define __NR_rt_sigtimedwait    177
+#define __NR_rt_sigqueueinfo    178
+#define __NR_rt_sigsuspend      179
+#define __NR_pread64            180
+#define __NR_pwrite64           181
+#define __NR_lchown             182
+#define __NR_getcwd             183
+#define __NR_capget             184
+#define __NR_capset             185
+#define __NR_sigaltstack        186
+#define __NR_sendfile           187
+#define __NR_getpmsg            188     /* some people actually want streams */
+#define __NR_putpmsg            189     /* some people actually want streams */
+#define __NR_vfork              190
+#define __NR_ugetrlimit         191
+#define __NR_mmap2              192
+#define __NR_truncate64         193
+#define __NR_ftruncate64        194
+#define __NR_stat64             195
+#define __NR_lstat64            196
+#define __NR_fstat64            197
+#define __NR_chown32            198
+#define __NR_getuid32           199
+#define __NR_getgid32           200
+#define __NR_geteuid32          201
+#define __NR_getegid32          202
+#define __NR_setreuid32         203
+#define __NR_setregid32         204
+#define __NR_getgroups32        205
+#define __NR_setgroups32        206
+#define __NR_fchown32           207
+#define __NR_setresuid32        208
+#define __NR_getresuid32        209
+#define __NR_setresgid32        210
+#define __NR_getresgid32        211
+#define __NR_lchown32           212
+#define __NR_setuid32           213
+#define __NR_setgid32           214
+#define __NR_setfsuid32         215
+#define __NR_setfsgid32         216
+#define __NR_pivot_root         217
+#define __NR_getdents64         220
+#define __NR_gettid             221
+#define __NR_tkill              222
+#define __NR_setxattr           223
+#define __NR_lsetxattr          224
+#define __NR_fsetxattr          225
+#define __NR_getxattr           226
+#define __NR_lgetxattr          227
+#define __NR_fgetxattr          228
+#define __NR_listxattr          229
+#define __NR_llistxattr         230
+#define __NR_flistxattr         231
+#define __NR_removexattr        232
+#define __NR_lremovexattr       233
+#define __NR_fremovexattr       234
+#define __NR_futex              235
+#define __NR_sendfile64         236
+#define __NR_mincore            237
+#define __NR_madvise            238
+#define __NR_fcntl64            239
+#define __NR_readahead          240
+#define __NR_io_setup           241
+#define __NR_io_destroy         242
+#define __NR_io_getevents       243
+#define __NR_io_submit          244
+#define __NR_io_cancel          245
+#define __NR_fadvise64          246
+#define __NR_exit_group         247
+#define __NR_lookup_dcookie     248
+#define __NR_epoll_create       249
+#define __NR_epoll_ctl          250
+#define __NR_epoll_wait         251
+#define __NR_remap_file_pages   252
+#define __NR_set_tid_address    253
+#define __NR_timer_create       254
+#define __NR_timer_settime      255
+#define __NR_timer_gettime      256
+#define __NR_timer_getoverrun   257
+#define __NR_timer_delete       258
+#define __NR_clock_settime      259
+#define __NR_clock_gettime      260
+#define __NR_clock_getres       261
+#define __NR_clock_nanosleep    262
+#define __NR_statfs64           263
+#define __NR_fstatfs64          264
+#define __NR_tgkill             265
+#define __NR_utimes             266
+#define __NR_fadvise64_64       267
+#define __NR_mbind              268
+#define __NR_get_mempolicy      269
+#define __NR_set_mempolicy      270
+#define __NR_mq_open            271
+#define __NR_mq_unlink          272
+#define __NR_mq_timedsend       273
+#define __NR_mq_timedreceive    274
+#define __NR_mq_notify          275
+#define __NR_mq_getsetattr      276
+#define __NR_waitid             277
+#define __NR_vserver            278
+#define __NR_add_key            279
+#define __NR_request_key        280
+#define __NR_keyctl             281
+#define __NR_ioprio_set         282
+#define __NR_ioprio_get         283
+#define __NR_inotify_init       284
+#define __NR_inotify_add_watch  285
+#define __NR_inotify_rm_watch   286
+#define __NR_migrate_pages      287
+#define __NR_openat             288
+#define __NR_mkdirat            289
+#define __NR_mknodat            290
+#define __NR_fchownat           291
+#define __NR_futimesat          292
+#define __NR_fstatat64          293
+#define __NR_unlinkat           294
+#define __NR_renameat           295
+#define __NR_linkat             296
+#define __NR_symlinkat          297
+#define __NR_readlinkat         298
+#define __NR_fchmodat           299
+#define __NR_faccessat          300
+#define __NR_pselect6           301
+#define __NR_ppoll              302
+#define __NR_unshare            303
+#define __NR_set_robust_list    304
+#define __NR_get_robust_list    305
+#define __NR_splice             306
+#define __NR_sync_file_range    307
+#define __NR_tee                308
+#define __NR_vmsplice           309
+#define __NR_move_pages         310
+#define __NR_sched_setaffinity  311
+#define __NR_sched_getaffinity  312
+#define __NR_kexec_load         313
+#define __NR_getcpu             314
+#define __NR_epoll_pwait        315
+#define __NR_utimensat          316
+#define __NR_signalfd           317
+#define __NR_timerfd_create     318
+#define __NR_eventfd            319
+#define __NR_fallocate          320
+#define __NR_timerfd_settime    321
+#define __NR_timerfd_gettime    322
+#define __NR_signalfd4          323
+#define __NR_eventfd2           324
+#define __NR_epoll_create1      325
+#define __NR_dup3               326
+#define __NR_pipe2              327
+#define __NR_inotify_init1      328
+
+#ifdef __KERNEL__
+
+#define NR_syscalls             329
+
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_OLD_STAT
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLD_GETRLIMIT
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+
+/*
+ * "Conditional" syscalls
+ *
+ * What we want is __attribute__((weak,alias("sys_ni_syscall"))),
+ * but it doesn't work on all toolchains, so we just do it by hand
+ */
+#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/include/asm/user.h b/arch/m68k/include/asm/user.h
new file mode 100644
index 000000000000..f1f478d6e050
--- /dev/null
+++ b/arch/m68k/include/asm/user.h
@@ -0,0 +1,86 @@
+#ifndef _M68K_USER_H
+#define _M68K_USER_H
+
+/* Core file format: The core file is written in such a way that gdb
+   can understand it and provide useful information to the user (under
+   linux we use the 'trad-core' bfd).  There are quite a number of
+   obstacles to being able to view the contents of the floating point
+   registers, and until these are solved you will not be able to view the
+   contents of them.  Actually, you can read in the core file and look at
+   the contents of the user struct to find out what the floating point
+   registers contain.
+   The actual file contents are as follows:
+   UPAGE: 1 page consisting of a user struct that tells gdb what is present
+   in the file.  Directly after this is a copy of the task_struct, which
+   is currently not used by gdb, but it may come in useful at some point.
+   All of the registers are stored as part of the upage.  The upage should
+   always be only one page.
+   DATA: The data area is stored.  We use current->end_text to
+   current->brk to pick up all of the user variables, plus any memory
+   that may have been malloced.  No attempt is made to determine if a page
+   is demand-zero or if a page is totally unused, we just cover the entire
+   range.  All of the addresses are rounded in such a way that an integral
+   number of pages is written.
+   STACK: We need the stack information in order to get a meaningful
+   backtrace.  We need to write the data from (esp) to
+   current->start_stack, so we round each of these off in order to be able
+   to write an integer number of pages.
+   The minimum core file size is 3 pages, or 12288 bytes.
+*/
+
+struct user_m68kfp_struct {
+        unsigned long  fpregs[8*3];     /* fp0-fp7 registers */
+        unsigned long  fpcntl[3];       /* fp control regs */
+};
+
+/* This is the old layout of "struct pt_regs" as of Linux 1.x, and
+   is still the layout used by user (the new pt_regs doesn't have
+   all registers). */
+struct user_regs_struct {
+        long d1,d2,d3,d4,d5,d6,d7;
+        long a0,a1,a2,a3,a4,a5,a6;
+        long d0;
+        long usp;
+        long orig_d0;
+        short stkadj;
+        short sr;
+        long pc;
+        short fmtvec;
+        short __fill;
+};
+
+
+/* When the kernel dumps core, it starts by dumping the user struct -
+   this will be used by gdb to figure out where the data and stack segments
+   are within the file, and what virtual addresses to use. */
+struct user{
+/* We start with the registers, to mimic the way that "memory" is returned
+   from the ptrace(3,...) function.  */
+  struct user_regs_struct regs; /* Where the registers are actually stored */
+/* ptrace does not yet supply these.  Someday.... */
+  int u_fpvalid;                /* True if math co-processor being used. */
+                                /* for this mess. Not yet used. */
+  struct user_m68kfp_struct m68kfp; /* Math Co-processor registers. */
+/* The rest of this junk is to help gdb figure out what goes where */
+  unsigned long int u_tsize;    /* Text segment size (pages). */
+  unsigned long int u_dsize;    /* Data segment size (pages). */
+  unsigned long int u_ssize;    /* Stack segment size (pages). */
+  unsigned long start_code;     /* Starting virtual address of text. */
+  unsigned long start_stack;    /* Starting virtual address of stack area.
+                                   This is actually the bottom of the stack,
+                                   the top of the stack is always found in the
+                                   esp register.  */
+  long int signal;              /* Signal that caused the core dump. */
+  int reserved;                 /* No longer used */
+  unsigned long u_ar0;          /* Used by gdb to help find the values for */
+                                /* the registers. */
+  struct user_m68kfp_struct* u_fpstate; /* Math Co-processor pointer. */
+  unsigned long magic;          /* To uniquely identify a core file */
+  char u_comm[32];              /* User command that was responsible */
+};
+#define NBPG 4096
+#define UPAGES 1
+#define HOST_TEXT_START_ADDR (u.start_code)
+#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG)
+
+#endif
diff --git a/arch/m68k/include/asm/virtconvert.h b/arch/m68k/include/asm/virtconvert.h
new file mode 100644
index 000000000000..22ab05c9c52b
--- /dev/null
+++ b/arch/m68k/include/asm/virtconvert.h
@@ -0,0 +1,48 @@
+#ifndef __VIRT_CONVERT__
+#define __VIRT_CONVERT__
+
+/*
+ * Macros used for converting between virtual and physical mappings.
+ */
+
+#ifdef __KERNEL__
+
+#include <linux/compiler.h>
+#include <linux/mmzone.h>
+#include <asm/setup.h>
+#include <asm/page.h>
+
+/*
+ * Change virtual addresses to physical addresses and vv.
+ */
+static inline unsigned long virt_to_phys(void *address)
+{
+        return __pa(address);
+}
+
+static inline void *phys_to_virt(unsigned long address)
+{
+        return __va(address);
+}
+
+/* Permanent address of a page. */
+#ifdef CONFIG_SINGLE_MEMORY_CHUNK
+#define page_to_phys(page) \
+        __pa(PAGE_OFFSET + (((page) - pg_data_map[0].node_mem_map) << PAGE_SHIFT))
+#else
+#define page_to_phys(_page) ({                                          \
+        struct page *__page = _page;                                    \
+        struct pglist_data *pgdat;                                      \
+        pgdat = pg_data_table[page_to_nid(__page)];                     \
+        page_to_pfn(__page) << PAGE_SHIFT;                              \
+})
+#endif
+
+/*
+ * IO bus memory addresses are 1:1 with the physical address,
+ */
+#define virt_to_bus virt_to_phys
+#define bus_to_virt phys_to_virt
+
+#endif
+#endif
diff --git a/arch/m68k/include/asm/xor.h b/arch/m68k/include/asm/xor.h
new file mode 100644
index 000000000000..c82eb12a5b18
--- /dev/null
+++ b/arch/m68k/include/asm/xor.h
@@ -0,0 +1 @@
+#include <asm-generic/xor.h>
diff --git a/arch/m68k/include/asm/zorro.h b/arch/m68k/include/asm/zorro.h
new file mode 100644
index 000000000000..5ce97c22b582
--- /dev/null
+++ b/arch/m68k/include/asm/zorro.h
@@ -0,0 +1,45 @@
+#ifndef _ASM_M68K_ZORRO_H
+#define _ASM_M68K_ZORRO_H
+
+#include <asm/raw_io.h>
+
+#define z_readb raw_inb
+#define z_readw raw_inw
+#define z_readl raw_inl
+
+#define z_writeb raw_outb
+#define z_writew raw_outw
+#define z_writel raw_outl
+
+#define z_memset_io(a,b,c)      memset((void *)(a),(b),(c))
+#define z_memcpy_fromio(a,b,c)  memcpy((a),(void *)(b),(c))
+#define z_memcpy_toio(a,b,c)    memcpy((void *)(a),(b),(c))
+
+static inline void __iomem *z_remap_nocache_ser(unsigned long physaddr,
+                                        unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+static inline void __iomem *z_remap_nocache_nonser(unsigned long physaddr,
+                                           unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_NOCACHE_NONSER);
+}
+
+static inline void __iomem *z_remap_writethrough(unsigned long physaddr,
+                                         unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+static inline void __iomem *z_remap_fullcache(unsigned long physaddr,
+                                      unsigned long size)
+{
+        return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+#define z_unmap iounmap
+#define z_iounmap iounmap
+#define z_ioremap z_remap_nocache_ser
+
+#endif /* _ASM_M68K_ZORRO_H */