Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: More device tree support updates" from Olof Johansson:
 "This branch contains a number of updates for device tree support on
  several ARM platforms, in particular:

   * AT91 continues the device tree conversion adding support for a
     number of on-chip drivers and other functionality
   * ux500 adds probing of some of the core SoC blocks through device
     tree
   * Initial device tree support for ST SPEAr600 platforms
   * kirkwood continues the conversion to device-tree probing"

Manually merge arch/arm/mach-ux500/Kconfig due to MACH_U8500 rename, and
drivers/usb/gadget/at91_udc.c due to header file include cleanups.

Also do an "evil merge" for the MACH_U8500 config option rename that the
affected RMI4 touchscreen driver in staging.  It's called MACH_MOP500
now, and it was missed during previous merges.

* tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  ARM: SPEAr600: Add device-tree support to SPEAr600 boards
  ARM: ux500: Provide local timer support for Device Tree
  ARM: ux500: Enable PL022 SSP Controller in Device Tree
  ARM: ux500: Enable PL310 Level 2 Cache Controller in Device Tree
  ARM: ux500: Enable PL011 AMBA UART Controller for Device Tree
  ARM: ux500: Enable Cortex-A9 GIC (Generic Interrupt Controller) in Device Tree
  ARM: ux500: db8500: list most devices in the snowball device tree
  ARM: ux500: split dts file for snowball into generic part
  ARM: ux500: combine the board init functions for DT boot
  ARM: ux500: Initial Device Tree support for Snowball
  ARM: ux500: CONFIG: Enable Device Tree support for future endeavours
  ARM: kirkwood: use devicetree for rtc-mv
  ARM: kirkwood: rtc-mv devicetree bindings
  ARM: kirkwood: fdt: define uart[01] as disabled, enable uart0
  ARM: kirkwood: fdt: facilitate new boards during fdt migration
  ARM: kirkwood: fdt: absorb kirkwood_init()
  ARM: kirkwood: fdt: use mrvl ticker symbol
  ARM: orion: wdt: use resource vice direct access
  ARM: Kirkwood: Remove tclk from kirkwood_asoc_platform_data.
  ARM: orion: spi: remove enable_clock_fix which is not used
  ...

67 files changed, 1798 insertions, 461 deletions

diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index a100db03ec90..92f36627e7f8 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -59,6 +59,26 @@
                                 reg = <0xfffff000 0x200>;
                         };
 
+                        ramc0: ramc@ffffea00 {
+                                compatible = "atmel,at91sam9260-sdramc";
+                                reg = <0xffffea00 0x200>;
+                        };
+
+                        pmc: pmc@fffffc00 {
+                                compatible = "atmel,at91rm9200-pmc";
+                                reg = <0xfffffc00 0x100>;
+                        };
+
+                        rstc@fffffd00 {
+                                compatible = "atmel,at91sam9260-rstc";
+                                reg = <0xfffffd00 0x10>;
+                        };
+
+                        shdwc@fffffd10 {
+                                compatible = "atmel,at91sam9260-shdwc";
+                                reg = <0xfffffd10 0x10>;
+                        };
+
                         pit: timer@fffffd30 {
                                 compatible = "atmel,at91sam9260-pit";
                                 reg = <0xfffffd30 0xf>;
@@ -171,6 +191,49 @@
                                 interrupts = <21 4>;
                                 status = "disabled";
                         };
+
+                        usb1: gadget@fffa4000 {
+                                compatible = "atmel,at91rm9200-udc";
+                                reg = <0xfffa4000 0x4000>;
+                                interrupts = <10 4>;
+                                status = "disabled";
+                        };
+                };
+
+                nand0: nand@40000000 {
+                        compatible = "atmel,at91rm9200-nand";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x40000000 0x10000000
+                               0xffffe800 0x200
+                              >;
+                        atmel,nand-addr-offset = <21>;
+                        atmel,nand-cmd-offset = <22>;
+                        gpios = <&pioC 13 0
+                                 &pioC 14 0
+                                 0
+                                >;
+                        status = "disabled";
                 };
+
+                usb0: ohci@00500000 {
+                        compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+                        reg = <0x00500000 0x100000>;
+                        interrupts = <20 4>;
+                        status = "disabled";
+                };
+        };
+
+        i2c@0 {
+                compatible = "i2c-gpio";
+                gpios = <&pioA 23 0 /* sda */
+                         &pioA 24 0 /* scl */
+                        >;
+                i2c-gpio,sda-open-drain;
+                i2c-gpio,scl-open-drain;
+                i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                status = "disabled";
         };
 };
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index e64eb932083b..ac0dc0031dda 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
         compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
         chosen {
-                bootargs = "128M console=ttyS0,115200 mtdparts=atmel_nand:8M(bootstrap/uboot/kernel)ro,-(rootfs) root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+                bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
         };
 
         ahb {
@@ -33,5 +33,17 @@
                                 status = "okay";
                         };
                 };
+
+                usb0: ohci@00600000 {
+                        status = "okay";
+                        num-ports = <2>;
+                        atmel,vbus-gpio = <&pioD 19 0
+                                           &pioD 20 0
+                                          >;
+                };
+
+                usb1: ehci@00700000 {
+                        status = "okay";
+                };
         };
 };
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index f779667159b1..3d0c32fb218f 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -60,6 +60,22 @@
                                 reg = <0xfffff000 0x200>;
                         };
 
+                        ramc0: ramc@ffffe400 {
+                                compatible = "atmel,at91sam9g45-ddramc";
+                                reg = <0xffffe400 0x200
+                                       0xffffe600 0x200>;
+                        };
+
+                        pmc: pmc@fffffc00 {
+                                compatible = "atmel,at91rm9200-pmc";
+                                reg = <0xfffffc00 0x100>;
+                        };
+
+                        rstc@fffffd00 {
+                                compatible = "atmel,at91sam9g45-rstc";
+                                reg = <0xfffffd00 0x10>;
+                        };
+
                         pit: timer@fffffd30 {
                                 compatible = "atmel,at91sam9260-pit";
                                 reg = <0xfffffd30 0xf>;
@@ -67,6 +83,11 @@
                         };
 
 
+                        shdwc@fffffd10 {
+                                compatible = "atmel,at91sam9rl-shdwc";
+                                reg = <0xfffffd10 0x10>;
+                        };
+
                         tcb0: timer@fff7c000 {
                                 compatible = "atmel,at91rm9200-tcb";
                                 reg = <0xfff7c000 0x100>;
@@ -180,5 +201,48 @@
                                 status = "disabled";
                         };
                 };
+
+                nand0: nand@40000000 {
+                        compatible = "atmel,at91rm9200-nand";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x40000000 0x10000000
+                               0xffffe200 0x200
+                              >;
+                        atmel,nand-addr-offset = <21>;
+                        atmel,nand-cmd-offset = <22>;
+                        gpios = <&pioC 8 0
+                                 &pioC 14 0
+                                 0
+                                >;
+                        status = "disabled";
+                };
+
+                usb0: ohci@00700000 {
+                        compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+                        reg = <0x00700000 0x100000>;
+                        interrupts = <22 4>;
+                        status = "disabled";
+                };
+
+                usb1: ehci@00800000 {
+                        compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+                        reg = <0x00800000 0x100000>;
+                        interrupts = <22 4>;
+                        status = "disabled";
+                };
+        };
+
+        i2c@0 {
+                compatible = "i2c-gpio";
+                gpios = <&pioA 20 0 /* sda */
+                         &pioA 21 0 /* scl */
+                        >;
+                i2c-gpio,sda-open-drain;
+                i2c-gpio,scl-open-drain;
+                i2c-gpio,delay-us = <5>;        /* ~100 kHz */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                status = "disabled";
         };
 };
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 15e25f903cad..c4c8ae4123d5 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -14,13 +14,24 @@
         compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
 
         chosen {
-                bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+                bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=jffs2";
         };
 
         memory@70000000 {
                 reg = <0x70000000 0x4000000>;
         };
 
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                main_clock: clock@0 {
+                        compatible = "atmel,osc", "fixed-clock";
+                        clock-frequency = <12000000>;
+                };
+        };
+
         ahb {
                 apb {
                         dbgu: serial@ffffee00 {
@@ -36,6 +47,39 @@
                                 status = "okay";
                         };
                 };
+
+                nand0: nand@40000000 {
+                        nand-bus-width = <8>;
+                        nand-ecc-mode = "soft";
+                        nand-on-flash-bbt;
+                        status = "okay";
+
+                        boot@0 {
+                                label = "bootstrap/uboot/kernel";
+                                reg = <0x0 0x400000>;
+                        };
+
+                        rootfs@400000 {
+                                label = "rootfs";
+                                reg = <0x400000 0x3C00000>;
+                        };
+
+                        data@4000000 {
+                                label = "data";
+                                reg = <0x4000000 0xC000000>;
+                        };
+                };
+
+                usb0: ohci@00700000 {
+                        status = "okay";
+                        num-ports = <2>;
+                        atmel,vbus-gpio = <&pioD 1 0
+                                           &pioD 3 0>;
+                };
+
+                usb1: ehci@00800000 {
+                        status = "okay";
+                };
         };
 
         leds {
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index a02e636d8a57..c111001f254e 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -58,6 +58,26 @@
                                 reg = <0xfffff000 0x200>;
                         };
 
+                        ramc0: ramc@ffffe800 {
+                                compatible = "atmel,at91sam9g45-ddramc";
+                                reg = <0xffffe800 0x200>;
+                        };
+
+                        pmc: pmc@fffffc00 {
+                                compatible = "atmel,at91rm9200-pmc";
+                                reg = <0xfffffc00 0x100>;
+                        };
+
+                        rstc@fffffe00 {
+                                compatible = "atmel,at91sam9g45-rstc";
+                                reg = <0xfffffe00 0x10>;
+                        };
+
+                        shdwc@fffffe10 {
+                                compatible = "atmel,at91sam9x5-shdwc";
+                                reg = <0xfffffe10 0x10>;
+                        };
+
                         pit: timer@fffffe30 {
                                 compatible = "atmel,at91sam9260-pit";
                                 reg = <0xfffffe30 0xf>;
@@ -172,5 +192,73 @@
                                 status = "disabled";
                         };
                 };
+
+                nand0: nand@40000000 {
+                        compatible = "atmel,at91rm9200-nand";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0x40000000 0x10000000
+                              >;
+                        atmel,nand-addr-offset = <21>;
+                        atmel,nand-cmd-offset = <22>;
+                        gpios = <&pioC 8 0
+                                 &pioC 14 0
+                                 0
+                                >;
+                        status = "disabled";
+                };
+
+                usb0: ohci@00600000 {
+                        compatible = "atmel,at91rm9200-ohci", "usb-ohci";
+                        reg = <0x00600000 0x100000>;
+                        interrupts = <22 4>;
+                        status = "disabled";
+                };
+
+                usb1: ehci@00700000 {
+                        compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
+                        reg = <0x00700000 0x100000>;
+                        interrupts = <22 4>;
+                        status = "disabled";
+                };
+        };
+
+        i2c@0 {
+                compatible = "i2c-gpio";
+                gpios = <&pioA 30 0 /* sda */
+                         &pioA 31 0 /* scl */
+                        >;
+                i2c-gpio,sda-open-drain;
+                i2c-gpio,scl-open-drain;
+                i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                status = "disabled";
+        };
+
+        i2c@1 {
+                compatible = "i2c-gpio";
+                gpios = <&pioC 0 0 /* sda */
+                         &pioC 1 0 /* scl */
+                        >;
+                i2c-gpio,sda-open-drain;
+                i2c-gpio,scl-open-drain;
+                i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                status = "disabled";
+        };
+
+        i2c@2 {
+                compatible = "i2c-gpio";
+                gpios = <&pioB 4 0 /* sda */
+                         &pioB 5 0 /* scl */
+                        >;
+                i2c-gpio,sda-open-drain;
+                i2c-gpio,scl-open-drain;
+                i2c-gpio,delay-us = <2>;        /* ~100 kHz */
+                #address-cells = <1>;
+                #size-cells = <0>;
+                status = "disabled";
         };
 };
diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 64ae3e890259..67936f83c694 100644
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -12,6 +12,51 @@
                 reg = <0x20000000 0x8000000>;
         };
 
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                main_clock: clock@0 {
+                        compatible = "atmel,osc", "fixed-clock";
+                        clock-frequency = <12000000>;
+                };
+        };
+
+        ahb {
+                nand0: nand@40000000 {
+                        nand-bus-width = <8>;
+                        nand-ecc-mode = "soft";
+                        nand-on-flash-bbt;
+                        status = "okay";
+
+                        at91bootstrap@0 {
+                                label = "at91bootstrap";
+                                reg = <0x0 0x40000>;
+                        };
+
+                        uboot@40000 {
+                                label = "u-boot";
+                                reg = <0x40000 0x80000>;
+                        };
+
+                        ubootenv@c0000 {
+                                label = "U-Boot Env";
+                                reg = <0xc0000 0x140000>;
+                        };
+
+                        kernel@200000 {
+                                label = "kernel";
+                                reg = <0x200000 0x600000>;
+                        };
+
+                        rootfs@800000 {
+                                label = "rootfs";
+                                reg = <0x800000 0x1f800000>;
+                        };
+                };
+        };
+
         leds {
                 compatible = "gpio-leds";
 
diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi
new file mode 100644
index 000000000000..d73dce645667
--- /dev/null
+++ b/arch/arm/boot/dts/db8500.dtsi
@@ -0,0 +1,275 @@
+/*
+ * Copyright 2012 Linaro Ltd
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        soc-u9500 {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "stericsson,db8500";
+                interrupt-parent = <&intc>;
+                ranges;
+
+                intc: interrupt-controller@a0411000 {
+                        compatible = "arm,cortex-a9-gic";
+                        #interrupt-cells = <3>;
+                        #address-cells = <1>;
+                        interrupt-controller;
+                        interrupt-parent;
+                        reg = <0xa0411000 0x1000>,
+                              <0xa0410100 0x100>;
+                };
+
+                L2: l2-cache {
+                        compatible = "arm,pl310-cache";
+                        reg = <0xa0412000 0x1000>;
+                        interrupts = <0 13 4>;
+                        cache-unified;
+                        cache-level = <2>;
+                };
+
+                pmu {
+                        compatible = "arm,cortex-a9-pmu";
+                        interrupts = <0 7 0x4>;
+                };
+
+                timer@a0410600 {
+                        compatible = "arm,cortex-a9-twd-timer";
+                        reg = <0xa0410600 0x20>;
+                        interrupts = <1 13 0x304>;
+                };
+
+                rtc@80154000 {
+                        compatible = "stericsson,db8500-rtc";
+                        reg = <0x80154000 0x1000>;
+                        interrupts = <0 18 0x4>;
+                };
+
+                gpio0: gpio@8012e000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8012e000 0x80>;
+                        interrupts = <0 119 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio1: gpio@8012e080 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8012e080 0x80>;
+                        interrupts = <0 120 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio2: gpio@8000e000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e000 0x80>;
+                        interrupts = <0 121 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio3: gpio@8000e080 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e080 0x80>;
+                        interrupts = <0 122 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio4: gpio@8000e100 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e100 0x80>;
+                        interrupts = <0 123 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio5: gpio@8000e180 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8000e180 0x80>;
+                        interrupts = <0 124 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio6: gpio@8011e000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8011e000 0x80>;
+                        interrupts = <0 125 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio7: gpio@8011e080 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0x8011e080 0x80>;
+                        interrupts = <0 126 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                gpio8: gpio@a03fe000 {
+                        compatible = "stericsson,db8500-gpio",
+                                "stmicroelectronics,nomadik-gpio";
+                        reg =  <0xa03fe000 0x80>;
+                        interrupts = <0 127 0x4>;
+                        supports-sleepmode;
+                        gpio-controller;
+                };
+
+                usb@a03e0000 {
+                        compatible = "stericsson,db8500-musb",
+                                "mentor,musb";
+                        reg = <0xa03e0000 0x10000>;
+                        interrupts = <0 23 0x4>;
+                };
+
+                dma-controller@801C0000 {
+                        compatible = "stericsson,db8500-dma40",
+                                        "stericsson,dma40";
+                        reg = <0x801C0000 0x1000 0x40010000 0x800>;
+                        interrupts = <0 25 0x4>;
+                };
+
+                prcmu@80157000 {
+                        compatible = "stericsson,db8500-prcmu";
+                        reg = <0x80157000 0x1000>;
+                        interrupts = <46 47>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+
+                        ab8500@5 {
+                                compatible = "stericsson,ab8500";
+                                reg = <5>; /* mailbox 5 is i2c */
+                                interrupts = <0 40 0x4>;
+                        };
+                };
+
+                i2c@80004000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80004000 0x1000>;
+                        interrupts = <0 21 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@80122000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80122000 0x1000>;
+                        interrupts = <0 22 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@80128000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80128000 0x1000>;
+                        interrupts = <0 55 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@80110000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x80110000 0x1000>;
+                        interrupts = <0 12 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                i2c@8012a000 {
+                        compatible = "stericsson,db8500-i2c", "stmicroelectronics,nomadik-i2c";
+                        reg = <0x8012a000 0x1000>;
+                        interrupts = <0 51 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                };
+
+                ssp@80002000 {
+                        compatible = "arm,pl022", "arm,primecell";
+                        reg = <80002000 0x1000>;
+                        interrupts = <0 14 0x4>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
+                        status = "disabled";
+
+                        // Add one of these for each child device
+                        cs-gpios = <&gpio0 31 &gpio4 14 &gpio4 16 &gpio6 22 &gpio7 0>;
+
+                };
+
+                uart@80120000 {
+                        compatible = "arm,pl011", "arm,primecell";
+                        reg = <0x80120000 0x1000>;
+                        interrupts = <0 11 0x4>;
+                        status = "disabled";
+                };
+                uart@80121000 {
+                        compatible = "arm,pl011", "arm,primecell";
+                        reg = <0x80121000 0x1000>;
+                        interrupts = <0 19 0x4>;
+                        status = "disabled";
+                };
+                uart@80007000 {
+                        compatible = "arm,pl011", "arm,primecell";
+                        reg = <0x80007000 0x1000>;
+                        interrupts = <0 26 0x4>;
+                        status = "disabled";
+                };
+
+                sdi@80126000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80126000 0x1000>;
+                        interrupts = <0 60 0x4>;
+                        status = "disabled";
+                };
+                sdi@80118000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80118000 0x1000>;
+                        interrupts = <0 50 0x4>;
+                        status = "disabled";
+                };
+                sdi@80005000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80005000 0x1000>;
+                        interrupts = <0 41 0x4>;
+                        status = "disabled";
+                };
+                sdi@80119000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80119000 0x1000>;
+                        interrupts = <0 59 0x4>;
+                        status = "disabled";
+                };
+                sdi@80114000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80114000 0x1000>;
+                        interrupts = <0 99 0x4>;
+                        status = "disabled";
+                };
+                sdi@80008000 {
+                        compatible = "arm,pl18x", "arm,primecell";
+                        reg = <0x80114000 0x1000>;
+                        interrupts = <0 100 0x4>;
+                        status = "disabled";
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts
index 8a5dff807b45..a5376b84227f 100644
--- a/arch/arm/boot/dts/kirkwood-dreamplug.dts
+++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts
@@ -4,7 +4,7 @@
 
 / {
         model = "Globalscale Technologies Dreamplug";
-        compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+        compatible = "globalscale,dreamplug-003-ds2001", "globalscale,dreamplug", "mrvl,kirkwood-88f6281", "mrvl,kirkwood";
 
         memory {
                 device_type = "memory";
@@ -15,11 +15,10 @@
                 bootargs = "console=ttyS0,115200n8 earlyprintk";
         };
 
-        serial@f1012000 {
-                compatible = "ns16550a";
-                reg = <0xf1012000 0xff>;
-                reg-shift = <2>;
-                interrupts = <33>;
-                clock-frequency = <200000000>;
+        ocp@f1000000 {
+                serial@12000 {
+                        clock-frequency = <200000000>;
+                        status = "ok";
+                };
         };
 };
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 771c6bbeb29a..3474ef890945 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -1,6 +1,36 @@
 /include/ "skeleton.dtsi"
 
 / {
-        compatible = "marvell,kirkwood";
-};
+        compatible = "mrvl,kirkwood";
+
+        ocp@f1000000 {
+                compatible = "simple-bus";
+                ranges = <0 0xf1000000 0x1000000>;
+                #address-cells = <1>;
+                #size-cells = <1>;
+
+                serial@12000 {
+                        compatible = "ns16550a";
+                        reg = <0x12000 0x100>;
+                        reg-shift = <2>;
+                        interrupts = <33>;
+                        /* set clock-frequency in board dts */
+                        status = "disabled";
+                };
 
+                serial@12100 {
+                        compatible = "ns16550a";
+                        reg = <0x12100 0x100>;
+                        reg-shift = <2>;
+                        interrupts = <34>;
+                        /* set clock-frequency in board dts */
+                        status = "disabled";
+                };
+
+                rtc@10300 {
+                        compatible = "mrvl,kirkwood-rtc", "mrvl,orion-rtc";
+                        reg = <0x10300 0x20>;
+                        interrupts = <53>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts
new file mode 100644
index 000000000000..359c6d679156
--- /dev/null
+++ b/arch/arm/boot/dts/snowball.dts
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2011 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "db8500.dtsi"
+
+/ {
+        model = "Calao Systems Snowball platform with device tree";
+        compatible = "calaosystems,snowball-a9500";
+
+        memory {
+                reg = <0x00000000 0x20000000>;
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                button@1 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <2>;
+                        label = "userpb";
+                        gpios = <&gpio1 0>;
+                };
+                button@2 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <3>;
+                        label = "userpb";
+                        gpios = <&gpio4 23>;
+                };
+                button@3 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <4>;
+                        label = "userpb";
+                        gpios = <&gpio4 23>;
+                };
+                button@4 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <5>;
+                        label = "userpb";
+                        gpios = <&gpio5 1>;
+                };
+                button@5 {
+                        debounce_interval = <50>;
+                        wakeup = <1>;
+                        linux,code = <6>;
+                        label = "userpb";
+                        gpios = <&gpio5 2>;
+                };
+        };
+
+        leds {
+                compatible = "gpio-leds";
+                used-led {
+                        label = "user_led";
+                        gpios = <&gpio4 14>;
+                };
+        };
+
+        soc-u9500 {
+
+                external-bus@50000000 {
+                        compatible = "simple-bus";
+                        reg = <0x50000000 0x10000000>;
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        ranges;
+
+                        ethernet@50000000 {
+                                compatible = "smsc,9111";
+                                reg = <0x50000000 0x10000>;
+                                interrupts = <12>;
+                                interrupt-parent = <&gpio4>;
+                        };
+                };
+
+                sdi@80126000 {
+                        status = "enabled";
+                        cd-gpios = <&gpio6 26>;
+                };
+
+                sdi@80114000 {
+                        status = "enabled";
+                };
+
+                uart@80120000 {
+                        status = "okay";
+                };
+
+                uart@80121000 {
+                        status = "okay";
+                };
+
+                uart@80007000 {
+                        status = "okay";
+                };
+
+                i2c@80004000 {
+                        tc3589x@42 {
+                                //compatible = "tc3589x";
+                                reg = <0x42>;
+                                interrupts = <25>;
+                                interrupt-parent = <&gpio6>;
+                        };
+                        tps61052@33 {
+                                //compatible = "tps61052";
+                                reg = <0x33>;
+                        };
+                };
+
+                i2c@80128000 {
+                        lp5521@0x33 {
+                                // compatible = "lp5521";
+                                reg = <0x33>;
+                        };
+                        lp5521@0x34 {
+                                // compatible = "lp5521";
+                                reg = <0x34>;
+                        };
+                        bh1780@0x29 {
+                                // compatible = "rohm,bh1780gli";
+                                reg = <0x33>;
+                        };
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts
new file mode 100644
index 000000000000..636292e18c90
--- /dev/null
+++ b/arch/arm/boot/dts/spear600-evb.dts
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "spear600.dtsi"
+
+/ {
+        model = "ST SPEAr600 Evaluation Board";
+        compatible = "st,spear600-evb", "st,spear600";
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        memory {
+                device_type = "memory";
+                reg = <0 0x10000000>;
+        };
+
+        ahb {
+                gmac: ethernet@e0800000 {
+                        phy-mode = "gmii";
+                        status = "okay";
+                };
+
+                apb {
+                        serial@d0000000 {
+                                status = "okay";
+                        };
+
+                        serial@d0080000 {
+                                status = "okay";
+                        };
+
+                        i2c@d0200000 {
+                                clock-frequency = <400000>;
+                                status = "okay";
+                        };
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
new file mode 100644
index 000000000000..ebe0885a2b98
--- /dev/null
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -0,0 +1,174 @@
+/*
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+        compatible = "st,spear600";
+
+        cpus {
+                cpu@0 {
+                        compatible = "arm,arm926ejs";
+                };
+        };
+
+        memory {
+                device_type = "memory";
+                reg = <0 0x40000000>;
+        };
+
+        ahb {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                compatible = "simple-bus";
+                ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+                vic0: interrupt-controller@f1100000 {
+                        compatible = "arm,pl190-vic";
+                        interrupt-controller;
+                        reg = <0xf1100000 0x1000>;
+                        #interrupt-cells = <1>;
+                };
+
+                vic1: interrupt-controller@f1000000 {
+                        compatible = "arm,pl190-vic";
+                        interrupt-controller;
+                        reg = <0xf1000000 0x1000>;
+                        #interrupt-cells = <1>;
+                };
+
+                gmac: ethernet@e0800000 {
+                        compatible = "st,spear600-gmac";
+                        reg = <0xe0800000 0x8000>;
+                        interrupt-parent = <&vic1>;
+                        interrupts = <24 23>;
+                        interrupt-names = "macirq", "eth_wake_irq";
+                        status = "disabled";
+                };
+
+                fsmc: flash@d1800000 {
+                        compatible = "st,spear600-fsmc-nand";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0xd1800000 0x1000        /* FSMC Register */
+                               0xd2000000 0x4000>;      /* NAND Base */
+                        reg-names = "fsmc_regs", "nand_data";
+                        st,ale-off = <0x20000>;
+                        st,cle-off = <0x10000>;
+                        status = "disabled";
+                };
+
+                smi: flash@fc000000 {
+                        compatible = "st,spear600-smi";
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        reg = <0xfc000000 0x1000>;
+                        interrupt-parent = <&vic1>;
+                        interrupts = <12>;
+                        status = "disabled";
+                };
+
+                ehci@e1800000 {
+                        compatible = "st,spear600-ehci", "usb-ehci";
+                        reg = <0xe1800000 0x1000>;
+                        interrupt-parent = <&vic1>;
+                        interrupts = <27>;
+                        status = "disabled";
+                };
+
+                ehci@e2000000 {
+                        compatible = "st,spear600-ehci", "usb-ehci";
+                        reg = <0xe2000000 0x1000>;
+                        interrupt-parent = <&vic1>;
+                        interrupts = <29>;
+                        status = "disabled";
+                };
+
+                ohci@e1900000 {
+                        compatible = "st,spear600-ohci", "usb-ohci";
+                        reg = <0xe1900000 0x1000>;
+                        interrupt-parent = <&vic1>;
+                        interrupts = <26>;
+                        status = "disabled";
+                };
+
+                ohci@e2100000 {
+                        compatible = "st,spear600-ohci", "usb-ohci";
+                        reg = <0xe2100000 0x1000>;
+                        interrupt-parent = <&vic1>;
+                        interrupts = <28>;
+                        status = "disabled";
+                };
+
+                apb {
+                        #address-cells = <1>;
+                        #size-cells = <1>;
+                        compatible = "simple-bus";
+                        ranges = <0xd0000000 0xd0000000 0x30000000>;
+
+                        serial@d0000000 {
+                                compatible = "arm,pl011", "arm,primecell";
+                                reg = <0xd0000000 0x1000>;
+                                interrupt-parent = <&vic0>;
+                                interrupts = <24>;
+                                status = "disabled";
+                        };
+
+                        serial@d0080000 {
+                                compatible = "arm,pl011", "arm,primecell";
+                                reg = <0xd0080000 0x1000>;
+                                interrupt-parent = <&vic0>;
+                                interrupts = <25>;
+                                status = "disabled";
+                        };
+
+                        /* local/cpu GPIO */
+                        gpio0: gpio@f0100000 {
+                                #gpio-cells = <2>;
+                                compatible = "arm,pl061", "arm,primecell";
+                                gpio-controller;
+                                reg = <0xf0100000 0x1000>;
+                                interrupt-parent = <&vic0>;
+                                interrupts = <18>;
+                        };
+
+                        /* basic GPIO */
+                        gpio1: gpio@fc980000 {
+                                #gpio-cells = <2>;
+                                compatible = "arm,pl061", "arm,primecell";
+                                gpio-controller;
+                                reg = <0xfc980000 0x1000>;
+                                interrupt-parent = <&vic1>;
+                                interrupts = <19>;
+                        };
+
+                        /* appl GPIO */
+                        gpio2: gpio@d8100000 {
+                                #gpio-cells = <2>;
+                                compatible = "arm,pl061", "arm,primecell";
+                                gpio-controller;
+                                reg = <0xd8100000 0x1000>;
+                                interrupt-parent = <&vic1>;
+                                interrupts = <4>;
+                        };
+
+                        i2c@d0200000 {
+                                #address-cells = <1>;
+                                #size-cells = <0>;
+                                compatible = "snps,designware-i2c";
+                                reg = <0xd0200000 0x1000>;
+                                interrupt-parent = <&vic0>;
+                                interrupts = <28>;
+                                status = "disabled";
+                        };
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 876d5c92ce36..dbf1c5a171c2 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -112,6 +112,7 @@
 
         usb@c5000000 {
                 nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
+                dr_mode = "otg";
         };
 
         gpio-keys {
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index aff8a175aa40..108e894a8926 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -190,6 +190,7 @@
                 reg = <0xc5000000 0x4000>;
                 interrupts = < 0 20 0x04 >;
                 phy_type = "utmi";
+                nvidia,has-legacy-mode;
         };
 
         usb@c5004000 {
diff --git a/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
new file mode 100644
index 000000000000..ad3eca17c436
--- /dev/null
+++ b/arch/arm/boot/dts/usb_a9g20-dab-mmx.dtsi
@@ -0,0 +1,96 @@
+/*
+ * calao-dab-mmx.dtsi - Device Tree Include file for Calao DAB-MMX Daughter Board
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2.
+ */
+
+/ {
+        ahb {
+                apb {
+                        usart1: serial@fffb4000 {
+                                status = "okay";
+                        };
+
+                        usart3: serial@fffd0000 {
+                                status = "okay";
+                        };
+                };
+        };
+
+        i2c-gpio@0 {
+                status = "okay";
+        };
+
+        leds {
+                compatible = "gpio-leds";
+
+                user_led1 {
+                        label = "user_led1";
+                        gpios = <&pioB 20 1>;
+                };
+
+/*
+* led already used by mother board but active as high
+*               user_led2 {
+*                       label = "user_led2";
+*                       gpios = <&pioB 21 1>;
+*               };
+*/
+                user_led3 {
+                        label = "user_led3";
+                        gpios = <&pioB 22 1>;
+                };
+
+                user_led4 {
+                        label = "user_led4";
+                        gpios = <&pioB 23 1>;
+                };
+
+                red {
+                        label = "red";
+                        gpios = <&pioB 24 1>;
+                };
+
+                orange {
+                        label = "orange";
+                        gpios = <&pioB 30 1>;
+                };
+
+                green {
+                        label = "green";
+                        gpios = <&pioB 31 1>;
+                };
+        };
+
+        gpio_keys {
+                compatible = "gpio-keys";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                user_pb1 {
+                        label = "user_pb1";
+                        gpios = <&pioB 25 1>;
+                        linux,code = <0x100>;
+                };
+
+                user_pb2 {
+                        label = "user_pb2";
+                        gpios = <&pioB 13 1>;
+                        linux,code = <0x101>;
+                };
+
+                user_pb3 {
+                        label = "user_pb3";
+                        gpios = <&pioA 26 1>;
+                        linux,code = <0x102>;
+                };
+
+                user_pb4 {
+                        label = "user_pb4";
+                        gpios = <&pioC 9 1>;
+                        linux,code = <0x103>;
+                };
+        };
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index d74545a2a77c..3b3c4e0fa79f 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -13,13 +13,24 @@
         compatible = "calao,usb-a9g20", "atmel,at91sam9g20", "atmel,at91sam9";
 
         chosen {
-                bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox)ro,128k(bareboxenv),128k(bareboxenv2),4M(kernel),120M(rootfs),-(data) root=/dev/mtdblock5 rw rootfstype=ubifs";
+                bootargs = "mem=64M console=ttyS0,115200 root=/dev/mtdblock5 rw rootfstype=ubifs";
         };
 
         memory@20000000 {
                 reg = <0x20000000 0x4000000>;
         };
 
+        clocks {
+                #address-cells = <1>;
+                #size-cells = <1>;
+                ranges;
+
+                main_clock: clock@0 {
+                        compatible = "atmel,osc", "fixed-clock";
+                        clock-frequency = <12000000>;
+                };
+        };
+
         ahb {
                 apb {
                         dbgu: serial@fffff200 {
@@ -30,6 +41,58 @@
                                 phy-mode = "rmii";
                                 status = "okay";
                         };
+
+                        usb1: gadget@fffa4000 {
+                                atmel,vbus-gpio = <&pioC 5 0>;
+                                status = "okay";
+                        };
+                };
+
+                nand0: nand@40000000 {
+                        nand-bus-width = <8>;
+                        nand-ecc-mode = "soft";
+                        nand-on-flash-bbt;
+                        status = "okay";
+
+                        at91bootstrap@0 {
+                                label = "at91bootstrap";
+                                reg = <0x0 0x20000>;
+                        };
+
+                        barebox@20000 {
+                                label = "barebox";
+                                reg = <0x20000 0x40000>;
+                        };
+
+                        bareboxenv@60000 {
+                                label = "bareboxenv";
+                                reg = <0x60000 0x20000>;
+                        };
+
+                        bareboxenv2@80000 {
+                                label = "bareboxenv2";
+                                reg = <0x80000 0x20000>;
+                        };
+
+                        kernel@a0000 {
+                                label = "kernel";
+                                reg = <0xa0000 0x400000>;
+                        };
+
+                        rootfs@4a0000 {
+                                label = "rootfs";
+                                reg = <0x4a0000 0x7800000>;
+                        };
+
+                        data@7ca0000 {
+                                label = "data";
+                                reg = <0x7ca0000 0x8360000>;
+                        };
+                };
+
+                usb0: ohci@00500000 {
+                        num-ports = <2>;
+                        status = "okay";
                 };
         };
 
@@ -55,4 +118,13 @@
                         gpio-key,wakeup;
                 };
         };
+
+        i2c@0 {
+                status = "okay";
+
+                rv3029c2@56 {
+                        compatible = "rv3029c2";
+                        reg = <0x56>;
+                };
+        };
 };
diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig
index 9123568d9a8d..994d331b2319 100644
--- a/arch/arm/configs/at91sam9g20_defconfig
+++ b/arch/arm/configs/at91sam9g20_defconfig
@@ -74,6 +74,8 @@ CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
 CONFIG_SPI=y
 CONFIG_SPI_ATMEL=y
 CONFIG_SPI_SPIDEV=y
@@ -105,6 +107,7 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
 CONFIG_RTC_DRV_AT91SAM9=y
 CONFIG_EXT2_FS=y
 CONFIG_MSDOS_FS=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d7b6e7b7271..889d73ac1ae1 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -13,6 +13,7 @@ CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
+CONFIG_MACH_UX500_DT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index e55cdcbd81fb..45db05d8d94c 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -20,9 +20,11 @@ config HAVE_AT91_USART5
 
 config AT91_SAM9_ALT_RESET
         bool
+        default !ARCH_AT91X40
 
 config AT91_SAM9G45_RESET
         bool
+        default !ARCH_AT91X40
 
 menu "Atmel AT91 System-on-Chip"
 
@@ -45,7 +47,6 @@ config ARCH_AT91SAM9260
         select HAVE_AT91_USART4
         select HAVE_AT91_USART5
         select HAVE_NET_MACB
-        select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9261
         bool "AT91SAM9261"
@@ -53,7 +54,6 @@ config ARCH_AT91SAM9261
         select GENERIC_CLOCKEVENTS
         select HAVE_FB_ATMEL
         select HAVE_AT91_DBGU0
-        select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G10
         bool "AT91SAM9G10"
@@ -61,7 +61,6 @@ config ARCH_AT91SAM9G10
         select GENERIC_CLOCKEVENTS
         select HAVE_AT91_DBGU0
         select HAVE_FB_ATMEL
-        select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9263
         bool "AT91SAM9263"
@@ -70,7 +69,6 @@ config ARCH_AT91SAM9263
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
         select HAVE_AT91_DBGU1
-        select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9RL
         bool "AT91SAM9RL"
@@ -79,7 +77,6 @@ config ARCH_AT91SAM9RL
         select HAVE_AT91_USART3
         select HAVE_FB_ATMEL
         select HAVE_AT91_DBGU0
-        select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G20
         bool "AT91SAM9G20"
@@ -90,7 +87,6 @@ config ARCH_AT91SAM9G20
         select HAVE_AT91_USART4
         select HAVE_AT91_USART5
         select HAVE_NET_MACB
-        select AT91_SAM9_ALT_RESET
 
 config ARCH_AT91SAM9G45
         bool "AT91SAM9G45"
@@ -100,7 +96,6 @@ config ARCH_AT91SAM9G45
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
         select HAVE_AT91_DBGU1
-        select AT91_SAM9G45_RESET
 
 config ARCH_AT91SAM9X5
         bool "AT91SAM9x5 family"
@@ -109,7 +104,6 @@ config ARCH_AT91SAM9X5
         select HAVE_FB_ATMEL
         select HAVE_NET_MACB
         select HAVE_AT91_DBGU0
-        select AT91_SAM9G45_RESET
 
 config ARCH_AT91X40
         bool "AT91x40"
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 14b5a9c9a514..d1e5750a6a04 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -216,6 +216,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
         CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
         CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
         CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
+        CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
         CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 0014573dfe17..df3bceacc86c 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -232,6 +232,8 @@ static struct clk_lookup periph_clocks_lookups[] = {
         /* more tc lookup table for DT entries */
         CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
         CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
+        CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
+        CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
         /* fake hclk clock */
         CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
         CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c
index a34d96afa746..b6831eeb7b76 100644
--- a/arch/arm/mach-at91/at91sam9x5.c
+++ b/arch/arm/mach-at91/at91sam9x5.c
@@ -131,7 +131,7 @@ static struct clk dma1_clk = {
         .type           = CLK_TYPE_PERIPHERAL,
 };
 static struct clk uhphs_clk = {
-        .name           = "uhphs_clk",
+        .name           = "uhphs",
         .pmc_mask       = 1 << AT91SAM9X5_ID_UHPHS,
         .type           = CLK_TYPE_PERIPHERAL,
 };
@@ -230,6 +230,9 @@ static struct clk_lookup periph_clocks_lookups[] = {
         /* additional fake clock for macb_hclk */
         CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
         CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
+        CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
+        CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
+        CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
 };
 
 /*
@@ -299,14 +302,8 @@ static void __init at91sam9x5_map_io(void)
         at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
 }
 
-static void __init at91sam9x5_ioremap_registers(void)
-{
-        at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
-}
-
 void __init at91sam9x5_initialize(void)
 {
-        arm_pm_restart = at91sam9g45_restart;
         at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
 
         /* Register GPIO subsystem (using DT) */
@@ -314,11 +311,6 @@ void __init at91sam9x5_initialize(void)
 }
 
 /* --------------------------------------------------------------------
- *  AT91SAM9x5 devices (temporary before modification of code)
- * -------------------------------------------------------------------- */
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-
-/* --------------------------------------------------------------------
  *  Interrupt initialization
  * -------------------------------------------------------------------- */
 /*
@@ -362,7 +354,6 @@ static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9x5_soc = {
         .map_io = at91sam9x5_map_io,
         .default_irq_priority = at91sam9x5_default_irq_priority,
-        .ioremap_registers = at91sam9x5_ioremap_registers,
         .register_clocks = at91sam9x5_register_clocks,
         .init = at91sam9x5_initialize,
 };
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 3bb40694b02d..161efbaa1029 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -138,6 +138,7 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .bus_width_16   = 0,
+        .ecc_mode       = NAND_ECC_SOFT,
         .parts          = afeb9260_nand_partition,
         .num_parts      = ARRAY_SIZE(afeb9260_nand_partition),
         .det_pin        = -EINVAL,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 8510e9e54988..c6d44ee0c77e 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -140,6 +140,7 @@ static struct atmel_nand_data __initdata cam60_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA9,
         .enable_pin     = AT91_PIN_PA7,
+        .ecc_mode       = NAND_ECC_SOFT,
         .parts          = cam60_nand_partition,
         .num_parts      = ARRAY_SIZE(cam60_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 989e1c5a9ca0..5f3680e7c883 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -117,6 +117,7 @@ static struct atmel_nand_data __initdata cpu9krea_nand_data = {
         .enable_pin     = AT91_PIN_PC14,
         .bus_width_16   = 0,
         .det_pin        = -EINVAL,
+        .ecc_mode       = NAND_ECC_SOFT,
 };
 
 #ifdef CONFIG_MACH_CPU9260
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 583b72472ad9..c18d4d307801 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -19,10 +19,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
-#include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/system_rev.h>
-#include <mach/at91sam9_smc.h>
 
 #include <asm/setup.h>
 #include <asm/irq.h>
@@ -30,58 +27,9 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include "sam9_smc.h"
 #include "generic.h"
 
 
-static void __init ek_init_early(void)
-{
-        /* Initialize processor: 12.000 MHz crystal */
-        at91_initialize(12000000);
-}
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
-        .ale            = 21,
-        .cle            = 22,
-        .det_pin        = -EINVAL,
-        .rdy_pin        = AT91_PIN_PC8,
-        .enable_pin     = AT91_PIN_PC14,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-        .ncs_read_setup         = 0,
-        .nrd_setup              = 2,
-        .ncs_write_setup        = 0,
-        .nwe_setup              = 2,
-
-        .ncs_read_pulse         = 4,
-        .nrd_pulse              = 4,
-        .ncs_write_pulse        = 4,
-        .nwe_pulse              = 4,
-
-        .read_cycle             = 7,
-        .write_cycle            = 7,
-
-        .mode                   = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
-        .tdf_cycles             = 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
-        ek_nand_data.bus_width_16 = board_have_nand_16bit();
-        /* setup bus-width (8 or 16) */
-        if (ek_nand_data.bus_width_16)
-                ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
-        else
-                ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
-        /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
-        at91_add_device_nand(&ek_nand_data);
-}
-
 static const struct of_device_id irq_of_match[] __initconst = {
 
         { .compatible = "atmel,at91rm9200-aic", .data = at91_aic_of_init },
@@ -98,9 +46,6 @@ static void __init at91_dt_init_irq(void)
 static void __init at91_dt_device_init(void)
 {
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
-        /* NAND */
-        ek_add_device_nand();
 }
 
 static const char *at91_dt_board_compat[] __initdata = {
@@ -114,7 +59,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
         /* Maintainer: Atmel */
         .timer          = &at91sam926x_timer,
         .map_io         = at91_map_io,
-        .init_early     = ek_init_early,
+        .init_early     = at91_dt_initialize,
         .init_irq       = at91_dt_init_irq,
         .init_machine   = at91_dt_device_init,
         .dt_compat      = at91_dt_board_compat,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index bb9914582013..59b92aab9bcf 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -108,6 +108,7 @@ static struct atmel_nand_data __initdata kb9202_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC29,
         .enable_pin     = AT91_PIN_PC28,
+        .ecc_mode       = NAND_ECC_SOFT,
         .parts          = kb9202_nand_partition,
         .num_parts      = ARRAY_SIZE(kb9202_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 3f8617c0e04e..57d5f6a4726a 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -190,6 +190,7 @@ static struct atmel_nand_data __initdata neocore926_nand_data = {
         .rdy_pin                = AT91_PIN_PB19,
         .rdy_pin_active_low     = 1,
         .enable_pin             = AT91_PIN_PD15,
+        .ecc_mode               = NAND_ECC_SOFT,
         .parts                  = neocore926_nand_partition,
         .num_parts              = ARRAY_SIZE(neocore926_nand_partition),
         .det_pin                = -EINVAL,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index e029d220cb84..b6ed5ed7081a 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -138,6 +138,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 9083df04e7ed..01332aa538b2 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -150,6 +150,8 @@ static struct atmel_nand_data __initdata dk_nand_data = {
         .det_pin        = AT91_PIN_PB1,
         .rdy_pin        = AT91_PIN_PC2,
         .enable_pin     = -EINVAL,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = dk_nand_partition,
         .num_parts      = ARRAY_SIZE(dk_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 84bce587735f..e8b116b6cba6 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -139,6 +139,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
+        .ecc_mode       = NAND_ECC_SOFT,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index be8233bcabdc..d5aec55b0eb4 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -181,6 +181,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 40895072a1a7..c3f994462864 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC15,
         .enable_pin     = AT91_PIN_PC14,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 29f66052fe63..66f0ddf4b2ae 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -187,6 +187,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 843d6286c6f4..8923ec9f5831 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -166,6 +166,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC13,
         .enable_pin     = AT91_PIN_PC14,
         .det_pin        = -EINVAL,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 57497e2b8878..e1bea73e6b30 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -148,6 +148,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .rdy_pin        = AT91_PIN_PC8,
         .enable_pin     = AT91_PIN_PC14,
         .det_pin        = -EINVAL,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index c1366d0032bf..b109ce2ba864 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -94,6 +94,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PD17,
         .enable_pin     = AT91_PIN_PB6,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 3c2e3fcc310c..ebc9d01ce742 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -110,6 +110,7 @@ static struct atmel_nand_data __initdata snapper9260_nand_data = {
         .bus_width_16   = 0,
         .enable_pin     = -EINVAL,
         .det_pin        = -EINVAL,
+        .ecc_mode       = NAND_ECC_SOFT,
 };
 
 static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 72eb3b4d9ab6..7640049410a0 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -86,6 +86,7 @@ static struct atmel_nand_data __initdata nand_data = {
         .enable_pin     = AT91_PIN_PC14,
         .bus_width_16   = 0,
         .det_pin        = -EINVAL,
+        .ecc_mode       = NAND_ECC_SOFT,
 };
 
 static struct sam9_smc_config __initdata nand_smc_config = {
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 26c36fc2d1e5..b7483a3d0980 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -198,6 +198,8 @@ static struct atmel_nand_data __initdata ek_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PA22,
         .enable_pin     = AT91_PIN_PD15,
+        .ecc_mode       = NAND_ECC_SOFT,
+        .on_flash_bbt   = 1,
         .parts          = ek_nand_partition,
         .num_parts      = ARRAY_SIZE(ek_nand_partition),
 };
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 52f460768f71..38dd279d30b2 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -182,6 +182,7 @@ static struct atmel_nand_data __initdata yl9200_nand_data = {
         .det_pin        = -EINVAL,
         .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
         .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
+        .ecc_mode       = NAND_ECC_SOFT,
         .parts          = yl9200_nand_partition,
         .num_parts      = ARRAY_SIZE(yl9200_nand_partition),
 };
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index be51ca7f694d..a0f4d7424cdc 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
@@ -671,16 +672,12 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
         uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 
-int __init at91_clock_init(unsigned long main_clock)
+static int __init at91_pmc_init(unsigned long main_clock)
 {
         unsigned tmp, freq, mckr;
         int i;
         int pll_overclock = false;
 
-        at91_pmc_base = ioremap(AT91_PMC, 256);
-        if (!at91_pmc_base)
-                panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
-
         /*
          * When the bootloader initialized the main oscillator correctly,
          * there's no problem using the cycle counter.  But if it didn't,
@@ -802,6 +799,55 @@ int __init at91_clock_init(unsigned long main_clock)
         return 0;
 }
 
+#if defined(CONFIG_OF)
+static struct of_device_id pmc_ids[] = {
+        { .compatible = "atmel,at91rm9200-pmc" },
+        { /*sentinel*/ }
+};
+
+static struct of_device_id osc_ids[] = {
+        { .compatible = "atmel,osc" },
+        { /*sentinel*/ }
+};
+
+int __init at91_dt_clock_init(void)
+{
+        struct device_node *np;
+        u32 main_clock = 0;
+
+        np = of_find_matching_node(NULL, pmc_ids);
+        if (!np)
+                panic("unable to find compatible pmc node in dtb\n");
+
+        at91_pmc_base = of_iomap(np, 0);
+        if (!at91_pmc_base)
+                panic("unable to map pmc cpu registers\n");
+
+        of_node_put(np);
+
+        /* retrieve the freqency of fixed clocks from device tree */
+        np = of_find_matching_node(NULL, osc_ids);
+        if (np) {
+                u32 rate;
+                if (!of_property_read_u32(np, "clock-frequency", &rate))
+                        main_clock = rate;
+        }
+
+        of_node_put(np);
+
+        return at91_pmc_init(main_clock);
+}
+#endif
+
+int __init at91_clock_init(unsigned long main_clock)
+{
+        at91_pmc_base = ioremap(AT91_PMC, 256);
+        if (!at91_pmc_base)
+                panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
+
+        return at91_pmc_init(main_clock);
+}
+
 /*
  * Several unused clocks may be active.  Turn them off.
  */
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 459f01a4a546..dd9b346c451d 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -20,6 +20,7 @@ extern void __init at91_init_sram(int bank, unsigned long base,
 extern void __init at91rm9200_set_type(int type);
 extern void __init at91_initialize(unsigned long main_clock);
 extern void __init at91x40_initialize(unsigned long main_clock);
+extern void __init at91_dt_initialize(void);
 
  /* Interrupts */
 extern void __init at91_init_irq_default(void);
@@ -52,6 +53,7 @@ extern void __init at91sam9rl_set_console_clock(int id);
 extern void __init at91sam9g45_set_console_clock(int id);
 #ifdef CONFIG_AT91_PMC_UNIT
 extern int __init at91_clock_init(unsigned long main_clock);
+extern int __init at91_dt_clock_init(void);
 #else
 static int inline at91_clock_init(unsigned long main_clock) { return 0; }
 #endif
diff --git a/arch/arm/mach-at91/include/mach/at91_shdwc.h b/arch/arm/mach-at91/include/mach/at91_shdwc.h
index 1d4fe822c77a..60478ea8bd46 100644
--- a/arch/arm/mach-at91/include/mach/at91_shdwc.h
+++ b/arch/arm/mach-at91/include/mach/at91_shdwc.h
@@ -36,9 +36,11 @@ extern void __iomem *at91_shdwc_base;
 #define                 AT91_SHDW_WKMODE0_HIGH          1
 #define                 AT91_SHDW_WKMODE0_LOW           2
 #define                 AT91_SHDW_WKMODE0_ANYLEVEL      3
-#define         AT91_SHDW_CPTWK0        (0xf << 4)              /* Counter On Wake Up 0 */
+#define         AT91_SHDW_CPTWK0_MAX    0xf                     /* Maximum Counter On Wake Up 0 */
+#define         AT91_SHDW_CPTWK0        (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
 #define                 AT91_SHDW_CPTWK0_(x)    ((x) << 4)
 #define         AT91_SHDW_RTTWKEN       (1   << 16)             /* Real Time Timer Wake-up Enable */
+#define         AT91_SHDW_RTCWKEN       (1   << 17)             /* Real Time Clock Wake-up Enable */
 
 #define AT91_SHDW_SR            0x08                    /* Shut Down Status Register */
 #define         AT91_SHDW_WAKEUP0       (1 <<  0)               /* Wake-up 0 Status */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h
index a297a77d88e2..88e43d534cdf 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9x5.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h
@@ -55,11 +55,6 @@
 #define AT91SAM9X5_BASE_USART2  0xf8024000
 
 /*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_DDRSDRC0        0xffffe800
-
-/*
  * Base addresses for early serial code (uncompress.h)
  */
 #define AT91_DBGU       AT91_BASE_DBGU0
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index dc8d6d4f17cf..544a5d5ce416 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -41,6 +41,7 @@
 #include <sound/atmel-ac97c.h>
 #include <linux/serial.h>
 #include <linux/platform_data/macb.h>
+#include <linux/platform_data/atmel.h>
 
  /* USB Device */
 struct at91_udc_data {
@@ -98,20 +99,6 @@ extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
- /* NAND / SmartMedia */
-struct atmel_nand_data {
-        int             enable_pin;     /* chip enable */
-        int             det_pin;        /* card detect */
-        int             rdy_pin;        /* ready/busy */
-        u8              rdy_pin_active_low;     /* rdy_pin value is inverted */
-        u8              ale;            /* address line number connected to ALE */
-        u8              cle;            /* address line number connected to CLE */
-        u8              bus_width_16;   /* buswidth is 16 bit */
-        u8              correction_cap; /* PMECC correction capability */
-        u16             sector_size;    /* Sector size for PMECC */
-        struct mtd_partition *parts;
-        unsigned int    num_parts;
-};
 extern void __init at91_add_device_nand(struct atmel_nand_data *data);
 
  /* I2C*/
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 6c9d5e69ac28..f630250c6b87 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -197,19 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 extern u32 at91_slow_clock_sz;
 #endif
 
-void __iomem *at91_ramc_base[2];
-
-void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
-{
-        if (id < 0 || id > 1) {
-                pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
-                BUG();
-        }
-        at91_ramc_base[id] = ioremap(addr, size);
-        if (!at91_ramc_base[id])
-                panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
-}
-
 static int at91_pm_enter(suspend_state_t state)
 {
         at91_gpio_suspend();
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 372396c2ecb6..1083739e3065 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -9,6 +9,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <linux/pm.h>
+#include <linux/of_address.h>
 
 #include <asm/mach/map.h>
 
@@ -51,6 +52,19 @@ void __init at91_init_interrupts(unsigned int *priority)
         at91_gpio_irq_setup();
 }
 
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+        if (id < 0 || id > 1) {
+                pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+                BUG();
+        }
+        at91_ramc_base[id] = ioremap(addr, size);
+        if (!at91_ramc_base[id])
+                panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
+
 static struct map_desc sram_desc[2] __initdata;
 
 void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
@@ -285,6 +299,150 @@ void __init at91_ioremap_matrix(u32 base_addr)
                 panic("Impossible to ioremap at91_matrix_base\n");
 }
 
+#if defined(CONFIG_OF)
+static struct of_device_id rstc_ids[] = {
+        { .compatible = "atmel,at91sam9260-rstc", .data = at91sam9_alt_restart },
+        { .compatible = "atmel,at91sam9g45-rstc", .data = at91sam9g45_restart },
+        { /*sentinel*/ }
+};
+
+static void at91_dt_rstc(void)
+{
+        struct device_node *np;
+        const struct of_device_id *of_id;
+
+        np = of_find_matching_node(NULL, rstc_ids);
+        if (!np)
+                panic("unable to find compatible rstc node in dtb\n");
+
+        at91_rstc_base = of_iomap(np, 0);
+        if (!at91_rstc_base)
+                panic("unable to map rstc cpu registers\n");
+
+        of_id = of_match_node(rstc_ids, np);
+        if (!of_id)
+                panic("AT91: rtsc no restart function availlable\n");
+
+        arm_pm_restart = of_id->data;
+
+        of_node_put(np);
+}
+
+static struct of_device_id ramc_ids[] = {
+        { .compatible = "atmel,at91sam9260-sdramc" },
+        { .compatible = "atmel,at91sam9g45-ddramc" },
+        { /*sentinel*/ }
+};
+
+static void at91_dt_ramc(void)
+{
+        struct device_node *np;
+
+        np = of_find_matching_node(NULL, ramc_ids);
+        if (!np)
+                panic("unable to find compatible ram conroller node in dtb\n");
+
+        at91_ramc_base[0] = of_iomap(np, 0);
+        if (!at91_ramc_base[0])
+                panic("unable to map ramc[0] cpu registers\n");
+        /* the controller may have 2 banks */
+        at91_ramc_base[1] = of_iomap(np, 1);
+
+        of_node_put(np);
+}
+
+static struct of_device_id shdwc_ids[] = {
+        { .compatible = "atmel,at91sam9260-shdwc", },
+        { .compatible = "atmel,at91sam9rl-shdwc", },
+        { .compatible = "atmel,at91sam9x5-shdwc", },
+        { /*sentinel*/ }
+};
+
+static const char *shdwc_wakeup_modes[] = {
+        [AT91_SHDW_WKMODE0_NONE]        = "none",
+        [AT91_SHDW_WKMODE0_HIGH]        = "high",
+        [AT91_SHDW_WKMODE0_LOW]         = "low",
+        [AT91_SHDW_WKMODE0_ANYLEVEL]    = "any",
+};
+
+const int at91_dtget_shdwc_wakeup_mode(struct device_node *np)
+{
+        const char *pm;
+        int err, i;
+
+        err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
+        if (err < 0)
+                return AT91_SHDW_WKMODE0_ANYLEVEL;
+
+        for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
+                if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
+                        return i;
+
+        return -ENODEV;
+}
+
+static void at91_dt_shdwc(void)
+{
+        struct device_node *np;
+        int wakeup_mode;
+        u32 reg;
+        u32 mode = 0;
+
+        np = of_find_matching_node(NULL, shdwc_ids);
+        if (!np) {
+                pr_debug("AT91: unable to find compatible shutdown (shdwc) conroller node in dtb\n");
+                return;
+        }
+
+        at91_shdwc_base = of_iomap(np, 0);
+        if (!at91_shdwc_base)
+                panic("AT91: unable to map shdwc cpu registers\n");
+
+        wakeup_mode = at91_dtget_shdwc_wakeup_mode(np);
+        if (wakeup_mode < 0) {
+                pr_warn("AT91: shdwc unknown wakeup mode\n");
+                goto end;
+        }
+
+        if (!of_property_read_u32(np, "atmel,wakeup-counter", &reg)) {
+                if (reg > AT91_SHDW_CPTWK0_MAX) {
+                        pr_warn("AT91: shdwc wakeup conter 0x%x > 0x%x reduce it to 0x%x\n",
+                                reg, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
+                        reg = AT91_SHDW_CPTWK0_MAX;
+                }
+                mode |= AT91_SHDW_CPTWK0_(reg);
+        }
+
+        if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
+                        mode |= AT91_SHDW_RTCWKEN;
+
+        if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
+                        mode |= AT91_SHDW_RTTWKEN;
+
+        at91_shdwc_write(AT91_SHDW_MR, wakeup_mode | mode);
+
+end:
+        pm_power_off = at91sam9_poweroff;
+
+        of_node_put(np);
+}
+
+void __init at91_dt_initialize(void)
+{
+        at91_dt_rstc();
+        at91_dt_ramc();
+        at91_dt_shdwc();
+
+        /* Init clock subsystem */
+        at91_dt_clock_init();
+
+        /* Register the processor-specific clocks */
+        at91_boot_soc.register_clocks();
+
+        at91_boot_soc.init();
+}
+#endif
+
 void __init at91_initialize(unsigned long main_clock)
 {
         at91_boot_soc.ioremap_registers();
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index acbc5e1db06f..e299a9576bf0 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -21,3 +21,4 @@ obj-$(CONFIG_MACH_T5325)		+= t5325-setup.o
 
 obj-$(CONFIG_CPU_IDLE)                  += cpuidle.o
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)          += board-dt.o
+obj-$(CONFIG_MACH_DREAMPLUG_DT)         += board-dreamplug.o
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
new file mode 100644
index 000000000000..985453994dd3
--- /dev/null
+++ b/arch/arm/mach-kirkwood/board-dreamplug.c
@@ -0,0 +1,152 @@
+/*
+ * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
+ *
+ * arch/arm/mach-kirkwood/board-dreamplug.c
+ *
+ * Marvell DreamPlug Reference Board Init for drivers not converted to
+ * flattened device tree yet.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
+#include <plat/mvsdio.h>
+#include "common.h"
+#include "mpp.h"
+
+struct mtd_partition dreamplug_partitions[] = {
+        {
+                .name   = "u-boot",
+                .size   = SZ_512K,
+                .offset = 0,
+        },
+        {
+                .name   = "u-boot env",
+                .size   = SZ_64K,
+                .offset = SZ_512K + SZ_512K,
+        },
+        {
+                .name   = "dtb",
+                .size   = SZ_64K,
+                .offset = SZ_512K + SZ_512K + SZ_512K,
+        },
+};
+
+static const struct flash_platform_data dreamplug_spi_slave_data = {
+        .type           = "mx25l1606e",
+        .name           = "spi_flash",
+        .parts          = dreamplug_partitions,
+        .nr_parts       = ARRAY_SIZE(dreamplug_partitions),
+};
+
+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
+        {
+                .modalias       = "m25p80",
+                .platform_data  = &dreamplug_spi_slave_data,
+                .irq            = -1,
+                .max_speed_hz   = 50000000,
+                .bus_num        = 0,
+                .chip_select    = 0,
+        },
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
+        .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
+};
+
+static struct mv_sata_platform_data dreamplug_sata_data = {
+        .n_ports        = 1,
+};
+
+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
+        /* unfortunately the CD signal has not been connected */
+};
+
+static struct gpio_led dreamplug_led_pins[] = {
+        {
+                .name                   = "dreamplug:blue:bluetooth",
+                .gpio                   = 47,
+                .active_low             = 1,
+        },
+        {
+                .name                   = "dreamplug:green:wifi",
+                .gpio                   = 48,
+                .active_low             = 1,
+        },
+        {
+                .name                   = "dreamplug:green:wifi_ap",
+                .gpio                   = 49,
+                .active_low             = 1,
+        },
+};
+
+static struct gpio_led_platform_data dreamplug_led_data = {
+        .leds           = dreamplug_led_pins,
+        .num_leds       = ARRAY_SIZE(dreamplug_led_pins),
+};
+
+static struct platform_device dreamplug_leds = {
+        .name   = "leds-gpio",
+        .id     = -1,
+        .dev    = {
+                .platform_data  = &dreamplug_led_data,
+        }
+};
+
+static unsigned int dreamplug_mpp_config[] __initdata = {
+        MPP0_SPI_SCn,
+        MPP1_SPI_MOSI,
+        MPP2_SPI_SCK,
+        MPP3_SPI_MISO,
+        MPP47_GPIO,     /* Bluetooth LED */
+        MPP48_GPIO,     /* Wifi LED */
+        MPP49_GPIO,     /* Wifi AP LED */
+        0
+};
+
+void __init dreamplug_init(void)
+{
+        /*
+         * Basic setup. Needs to be called early.
+         */
+        kirkwood_mpp_conf(dreamplug_mpp_config);
+
+        spi_register_board_info(dreamplug_spi_slave_info,
+                                ARRAY_SIZE(dreamplug_spi_slave_info));
+        kirkwood_spi_init();
+
+        kirkwood_ehci_init();
+        kirkwood_ge00_init(&dreamplug_ge00_data);
+        kirkwood_ge01_init(&dreamplug_ge01_data);
+        kirkwood_sata_init(&dreamplug_sata_data);
+        kirkwood_sdio_init(&dreamplug_mvsdio_data);
+
+        platform_device_register(&dreamplug_leds);
+}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index fbe6405602ed..1c672d9e6656 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -3,7 +3,7 @@
  *
  * arch/arm/mach-kirkwood/board-dt.c
  *
- * Marvell DreamPlug Reference Board Setup
+ * Flattened Device Tree board initialization
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2.  This program is licensed "as is" without any
@@ -12,150 +12,45 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/partitions.h>
-#include <linux/ata_platform.h>
-#include <linux/mv643xx_eth.h>
 #include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
-#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
-#include <plat/mvsdio.h>
+#include <asm/mach/map.h>
+#include <mach/bridge-regs.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct of_device_id kirkwood_dt_match_table[] __initdata = {
         { .compatible = "simple-bus", },
         { }
 };
 
-struct mtd_partition dreamplug_partitions[] = {
-        {
-                .name   = "u-boot",
-                .size   = SZ_512K,
-                .offset = 0,
-        },
-        {
-                .name   = "u-boot env",
-                .size   = SZ_64K,
-                .offset = SZ_512K + SZ_512K,
-        },
-        {
-                .name   = "dtb",
-                .size   = SZ_64K,
-                .offset = SZ_512K + SZ_512K + SZ_512K,
-        },
-};
-
-static const struct flash_platform_data dreamplug_spi_slave_data = {
-        .type           = "mx25l1606e",
-        .name           = "spi_flash",
-        .parts          = dreamplug_partitions,
-        .nr_parts       = ARRAY_SIZE(dreamplug_partitions),
-};
-
-static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
-        {
-                .modalias       = "m25p80",
-                .platform_data  = &dreamplug_spi_slave_data,
-                .irq            = -1,
-                .max_speed_hz   = 50000000,
-                .bus_num        = 0,
-                .chip_select    = 0,
-        },
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv_sata_platform_data dreamplug_sata_data = {
-        .n_ports        = 1,
-};
-
-static struct mvsdio_platform_data dreamplug_mvsdio_data = {
-        /* unfortunately the CD signal has not been connected */
-};
-
-static struct gpio_led dreamplug_led_pins[] = {
-        {
-                .name                   = "dreamplug:blue:bluetooth",
-                .gpio                   = 47,
-                .active_low             = 1,
-        },
-        {
-                .name                   = "dreamplug:green:wifi",
-                .gpio                   = 48,
-                .active_low             = 1,
-        },
-        {
-                .name                   = "dreamplug:green:wifi_ap",
-                .gpio                   = 49,
-                .active_low             = 1,
-        },
-};
-
-static struct gpio_led_platform_data dreamplug_led_data = {
-        .leds           = dreamplug_led_pins,
-        .num_leds       = ARRAY_SIZE(dreamplug_led_pins),
-};
-
-static struct platform_device dreamplug_leds = {
-        .name   = "leds-gpio",
-        .id     = -1,
-        .dev    = {
-                .platform_data  = &dreamplug_led_data,
-        }
-};
-
-static unsigned int dreamplug_mpp_config[] __initdata = {
-        MPP0_SPI_SCn,
-        MPP1_SPI_MOSI,
-        MPP2_SPI_SCK,
-        MPP3_SPI_MISO,
-        MPP47_GPIO,     /* Bluetooth LED */
-        MPP48_GPIO,     /* Wifi LED */
-        MPP49_GPIO,     /* Wifi AP LED */
-        0
-};
-
-static void __init dreamplug_init(void)
+static void __init kirkwood_dt_init(void)
 {
+        pr_info("Kirkwood: %s, TCLK=%d.\n", kirkwood_id(), kirkwood_tclk);
+
         /*
-         * Basic setup. Needs to be called early.
+         * Disable propagation of mbus errors to the CPU local bus,
+         * as this causes mbus errors (which can occur for example
+         * for PCI aborts) to throw CPU aborts, which we're not set
+         * up to deal with.
          */
-        kirkwood_mpp_conf(dreamplug_mpp_config);
+        writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
 
-        spi_register_board_info(dreamplug_spi_slave_info,
-                                ARRAY_SIZE(dreamplug_spi_slave_info));
-        kirkwood_spi_init();
+        kirkwood_setup_cpu_mbus();
 
-        kirkwood_ehci_init();
-        kirkwood_ge00_init(&dreamplug_ge00_data);
-        kirkwood_ge01_init(&dreamplug_ge01_data);
-        kirkwood_sata_init(&dreamplug_sata_data);
-        kirkwood_sdio_init(&dreamplug_mvsdio_data);
+#ifdef CONFIG_CACHE_FEROCEON_L2
+        kirkwood_l2_init();
+#endif
 
-        platform_device_register(&dreamplug_leds);
-}
+        /* internal devices that every board has */
+        kirkwood_wdt_init();
+        kirkwood_xor0_init();
+        kirkwood_xor1_init();
+        kirkwood_crypto_init();
 
-static void __init kirkwood_dt_init(void)
-{
-        kirkwood_init();
+#ifdef CONFIG_KEXEC
+        kexec_reinit = kirkwood_enable_pcie;
+#endif
 
         if (of_machine_is_compatible("globalscale,dreamplug"))
                 dreamplug_init();
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index 77d4852e19f2..a02cae881f2f 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -279,7 +279,7 @@ void __init kirkwood_crypto_init(void)
 /*****************************************************************************
  * XOR0
  ****************************************************************************/
-static void __init kirkwood_xor0_init(void)
+void __init kirkwood_xor0_init(void)
 {
         kirkwood_clk_ctrl |= CGC_XOR0;
 
@@ -291,7 +291,7 @@ static void __init kirkwood_xor0_init(void)
 /*****************************************************************************
  * XOR1
  ****************************************************************************/
-static void __init kirkwood_xor1_init(void)
+void __init kirkwood_xor1_init(void)
 {
         kirkwood_clk_ctrl |= CGC_XOR1;
 
@@ -303,7 +303,7 @@ static void __init kirkwood_xor1_init(void)
 /*****************************************************************************
  * Watchdog
  ****************************************************************************/
-static void __init kirkwood_wdt_init(void)
+void __init kirkwood_wdt_init(void)
 {
         orion_wdt_init(kirkwood_tclk);
 }
@@ -392,7 +392,7 @@ void __init kirkwood_audio_init(void)
 /*
  * Identify device ID and revision.
  */
-static char * __init kirkwood_id(void)
+char * __init kirkwood_id(void)
 {
         u32 dev, rev;
 
@@ -435,7 +435,7 @@ static char * __init kirkwood_id(void)
         }
 }
 
-static void __init kirkwood_l2_init(void)
+void __init kirkwood_l2_init(void)
 {
 #ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
         writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
@@ -450,7 +450,6 @@ void __init kirkwood_init(void)
 {
         printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
                 kirkwood_id(), kirkwood_tclk);
-        kirkwood_i2s_data.tclk = kirkwood_tclk;
 
         /*
          * Disable propagation of mbus errors to the CPU local bus,
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 9071a397136d..fa8e7689c436 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -51,6 +51,21 @@ void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev
 void kirkwood_audio_init(void);
 void kirkwood_restart(char, const char *);
 
+/* board init functions for boards not fully converted to fdt */
+#ifdef CONFIG_MACH_DREAMPLUG_DT
+void dreamplug_init(void);
+#else
+static inline void dreamplug_init(void) {};
+#endif
+
+/* early init functions not converted to fdt yet */
+char *kirkwood_id(void);
+void kirkwood_l2_init(void);
+void kirkwood_wdt_init(void);
+void kirkwood_xor0_init(void);
+void kirkwood_xor1_init(void);
+void kirkwood_crypto_init(void);
+
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;
 
diff --git a/arch/arm/mach-spear6xx/Kconfig b/arch/arm/mach-spear6xx/Kconfig
index ff4ae5ba00f1..fbe298bd1d92 100644
--- a/arch/arm/mach-spear6xx/Kconfig
+++ b/arch/arm/mach-spear6xx/Kconfig
@@ -5,11 +5,12 @@
 if ARCH_SPEAR6XX
 
 menu "SPEAr6xx Implementations"
-config BOARD_SPEAR600_EVB
-        bool "SPEAr600 Evaluation Board"
+config BOARD_SPEAR600_DT
+        bool "SPEAr600 generic board configured via device-tree"
         select MACH_SPEAR600
+        select USE_OF
         help
-          Supports ST SPEAr600 Evaluation Board
+          Supports ST SPEAr600 boards configured via the device-tree
 
 endmenu
 
diff --git a/arch/arm/mach-spear6xx/Makefile b/arch/arm/mach-spear6xx/Makefile
index cc1a4d82d459..76e5750552fc 100644
--- a/arch/arm/mach-spear6xx/Makefile
+++ b/arch/arm/mach-spear6xx/Makefile
@@ -4,9 +4,3 @@
 
 # common files
 obj-y   += clock.o spear6xx.o
-
-# spear600 specific files
-obj-$(CONFIG_MACH_SPEAR600) += spear600.o
-
-# spear600 boards files
-obj-$(CONFIG_BOARD_SPEAR600_EVB) += spear600_evb.o
diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c
index ac70e0d88fef..358f2800f17b 100644
--- a/arch/arm/mach-spear6xx/clock.c
+++ b/arch/arm/mach-spear6xx/clock.c
@@ -641,8 +641,8 @@ static struct clk_lookup spear_clk_lookups[] = {
         { .con_id = "gpt0_synth_clk",   .clk = &gpt0_synth_clk},
         { .con_id = "gpt2_synth_clk",   .clk = &gpt2_synth_clk},
         { .con_id = "gpt3_synth_clk",   .clk = &gpt3_synth_clk},
-        { .dev_id = "uart0",            .clk = &uart0_clk},
-        { .dev_id = "uart1",            .clk = &uart1_clk},
+        { .dev_id = "d0000000.serial",  .clk = &uart0_clk},
+        { .dev_id = "d0080000.serial",  .clk = &uart1_clk},
         { .dev_id = "firda",            .clk = &firda_clk},
         { .dev_id = "clcd",             .clk = &clcd_clk},
         { .dev_id = "gpt0",             .clk = &gpt0_clk},
@@ -655,20 +655,20 @@ static struct clk_lookup spear_clk_lookups[] = {
         { .con_id = "usbh.1_clk",       .clk = &usbh1_clk},
         /* clock derived from ahb clk */
         { .con_id = "apb_clk",          .clk = &apb_clk},
-        { .dev_id = "i2c_designware.0", .clk = &i2c_clk},
+        { .dev_id = "d0200000.i2c",     .clk = &i2c_clk},
         { .dev_id = "dma",              .clk = &dma_clk},
         { .dev_id = "jpeg",             .clk = &jpeg_clk},
         { .dev_id = "gmac",             .clk = &gmac_clk},
         { .dev_id = "smi",              .clk = &smi_clk},
-        { .con_id = "fsmc",             .clk = &fsmc_clk},
+        { .dev_id = "fsmc-nand",        .clk = &fsmc_clk},
         /* clock derived from apb clk */
         { .dev_id = "adc",              .clk = &adc_clk},
         { .dev_id = "ssp-pl022.0",      .clk = &ssp0_clk},
         { .dev_id = "ssp-pl022.1",      .clk = &ssp1_clk},
         { .dev_id = "ssp-pl022.2",      .clk = &ssp2_clk},
-        { .dev_id = "gpio0",            .clk = &gpio0_clk},
-        { .dev_id = "gpio1",            .clk = &gpio1_clk},
-        { .dev_id = "gpio2",            .clk = &gpio2_clk},
+        { .dev_id = "f0100000.gpio",    .clk = &gpio0_clk},
+        { .dev_id = "fc980000.gpio",    .clk = &gpio1_clk},
+        { .dev_id = "d8100000.gpio",    .clk = &gpio2_clk},
 };
 
 void __init spear6xx_clk_init(void)
diff --git a/arch/arm/mach-spear6xx/spear600.c b/arch/arm/mach-spear6xx/spear600.c
deleted file mode 100644
index d0e6eeae9b04..000000000000
--- a/arch/arm/mach-spear6xx/spear600.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/spear600.c
- *
- * SPEAr600 machine source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/ptrace.h>
-#include <asm/irq.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-/* Add spear600 specific devices here */
-
-void __init spear600_init(void)
-{
-        /* call spear6xx family common init function */
-        spear6xx_init();
-}
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
deleted file mode 100644
index c6e4254741cc..000000000000
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/spear600_evb.c
- *
- * SPEAr600 evaluation board source file
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware/vic.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <mach/generic.h>
-#include <mach/hardware.h>
-
-static struct amba_device *amba_devs[] __initdata = {
-        &gpio_device[0],
-        &gpio_device[1],
-        &gpio_device[2],
-        &uart_device[0],
-        &uart_device[1],
-};
-
-static struct platform_device *plat_devs[] __initdata = {
-};
-
-static void __init spear600_evb_init(void)
-{
-        unsigned int i;
-
-        /* call spear600 machine init function */
-        spear600_init();
-
-        /* Add Platform Devices */
-        platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs));
-
-        /* Add Amba Devices */
-        for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
-                amba_device_register(amba_devs[i], &iomem_resource);
-}
-
-MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
-        .atag_offset    =       0x100,
-        .map_io         =       spear6xx_map_io,
-        .init_irq       =       spear6xx_init_irq,
-        .handle_irq     =       vic_handle_irq,
-        .timer          =       &spear6xx_timer,
-        .init_machine   =       spear600_evb_init,
-        .restart        =       spear_restart,
-MACHINE_END
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index b997b1b10ba0..2ed8b14c82c8 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -6,111 +6,21 @@
  * Copyright (C) 2009 ST Microelectronics
  * Rajeev Kumar<rajeev-dlh.kumar@st.com>
  *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/types.h>
-#include <linux/amba/pl061.h>
-#include <linux/ptrace.h>
-#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
 #include <asm/hardware/vic.h>
-#include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/hardware.h>
-#include <mach/irqs.h>
-
-/* Add spear6xx machines common devices here */
-/* uart device registration */
-struct amba_device uart_device[] = {
-        {
-                .dev = {
-                        .init_name = "uart0",
-                },
-                .res = {
-                        .start = SPEAR6XX_ICM1_UART0_BASE,
-                        .end = SPEAR6XX_ICM1_UART0_BASE + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                },
-                .irq = {IRQ_UART_0},
-        }, {
-                .dev = {
-                        .init_name = "uart1",
-                },
-                .res = {
-                        .start = SPEAR6XX_ICM1_UART1_BASE,
-                        .end = SPEAR6XX_ICM1_UART1_BASE + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                },
-                .irq = {IRQ_UART_1},
-        }
-};
-
-/* gpio device registration */
-static struct pl061_platform_data gpio_plat_data[] = {
-        {
-                .gpio_base      = 0,
-                .irq_base       = SPEAR_GPIO0_INT_BASE,
-        }, {
-                .gpio_base      = 8,
-                .irq_base       = SPEAR_GPIO1_INT_BASE,
-        }, {
-                .gpio_base      = 16,
-                .irq_base       = SPEAR_GPIO2_INT_BASE,
-        },
-};
-
-struct amba_device gpio_device[] = {
-        {
-                .dev = {
-                        .init_name = "gpio0",
-                        .platform_data = &gpio_plat_data[0],
-                },
-                .res = {
-                        .start = SPEAR6XX_CPU_GPIO_BASE,
-                        .end = SPEAR6XX_CPU_GPIO_BASE + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                },
-                .irq = {IRQ_LOCAL_GPIO},
-        }, {
-                .dev = {
-                        .init_name = "gpio1",
-                        .platform_data = &gpio_plat_data[1],
-                },
-                .res = {
-                        .start = SPEAR6XX_ICM3_GPIO_BASE,
-                        .end = SPEAR6XX_ICM3_GPIO_BASE + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                },
-                .irq = {IRQ_BASIC_GPIO},
-        }, {
-                .dev = {
-                        .init_name = "gpio2",
-                        .platform_data = &gpio_plat_data[2],
-                },
-                .res = {
-                        .start = SPEAR6XX_ICM2_GPIO_BASE,
-                        .end = SPEAR6XX_ICM2_GPIO_BASE + SZ_4K - 1,
-                        .flags = IORESOURCE_MEM,
-                },
-                .irq = {IRQ_APPL_GPIO},
-        }
-};
-
-/* This will add devices, and do machine specific tasks */
-void __init spear6xx_init(void)
-{
-        /* nothing to do for now */
-}
-
-/* This will initialize vic */
-void __init spear6xx_init_irq(void)
-{
-        vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_PRI_BASE, 0, ~0, 0);
-        vic_init((void __iomem *)VA_SPEAR6XX_CPU_VIC_SEC_BASE, 32, ~0, 0);
-}
 
 /* Following will create static virtual/physical mappings */
 static struct map_desc spear6xx_io_desc[] __initdata = {
@@ -181,3 +91,33 @@ static void __init spear6xx_timer_init(void)
 struct sys_timer spear6xx_timer = {
         .init = spear6xx_timer_init,
 };
+
+static void __init spear600_dt_init(void)
+{
+        of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *spear600_dt_board_compat[] = {
+        "st,spear600",
+        NULL
+};
+
+static const struct of_device_id vic_of_match[] __initconst = {
+        { .compatible = "arm,pl190-vic", .data = vic_of_init, },
+        { /* Sentinel */ }
+};
+
+static void __init spear6xx_dt_init_irq(void)
+{
+        of_irq_init(vic_of_match);
+}
+
+DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
+        .map_io         =       spear6xx_map_io,
+        .init_irq       =       spear6xx_dt_init_irq,
+        .handle_irq     =       vic_handle_irq,
+        .timer          =       &spear6xx_timer,
+        .init_machine   =       spear600_dt_init,
+        .restart        =       spear_restart,
+        .dt_compat      =       spear600_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 8904d18de01a..880d02ec89d4 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -58,6 +58,12 @@ config UX500_AUTO_PLATFORM
           At least one platform needs to be selected in order to build
           a working kernel. If everything else is disabled, this
           automatically enables MACH_MOP500.
+
+config MACH_UX500_DT
+        bool "Generic U8500 support using device tree"
+        depends on MACH_MOP500
+        select USE_OF
+
 endmenu
 
 config UX500_DEBUG_UART
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
index ff0a4b5b0a82..dd5cd00e2554 100644
--- a/arch/arm/mach-ux500/Makefile.boot
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -2,3 +2,4 @@
 params_phys-y   := 0x00000100
 initrd_phys-y   := 0x00800000
 
+dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 29d330374994..77d03c1fbd04 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -30,6 +30,9 @@
 #include <linux/gpio_keys.h>
 #include <linux/delay.h>
 
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
 #include <linux/leds.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -440,7 +443,7 @@ static struct stedma40_chan_cfg ssp0_dma_cfg_tx = {
 };
 #endif
 
-static struct pl022_ssp_controller ssp0_platform_data = {
+static struct pl022_ssp_controller ssp0_plat = {
         .bus_id = 0,
 #ifdef CONFIG_STE_DMA40
         .enable_dma = 1,
@@ -458,7 +461,7 @@ static struct pl022_ssp_controller ssp0_platform_data = {
 
 static void __init mop500_spi_init(struct device *parent)
 {
-        db8500_add_ssp0(parent, &ssp0_platform_data);
+        db8500_add_ssp0(parent, &ssp0_plat);
 }
 
 #ifdef CONFIG_STE_DMA40
@@ -618,6 +621,7 @@ static void __init mop500_init_machine(void)
 
         mop500_pins_init();
 
+        /* FIXME: parent of ab8500 should be prcmu */
         for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
                 mop500_platform_devs[i]->dev.parent = parent;
 
@@ -738,3 +742,94 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
         .handle_irq     = gic_handle_irq,
         .init_machine   = snowball_init_machine,
 MACHINE_END
+
+#ifdef CONFIG_MACH_UX500_DT
+
+struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
+        OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
+        OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
+        OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
+        OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
+        {},
+};
+
+static const struct of_device_id u8500_soc_node[] = {
+        /* only create devices below soc node */
+        { .compatible = "stericsson,db8500", },
+        { },
+};
+
+static void __init u8500_init_machine(void)
+{
+        struct device *parent = NULL;
+        int i2c0_devs;
+        int i;
+
+        parent = u8500_init_devices();
+        i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
+
+        for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
+                mop500_platform_devs[i]->dev.parent = parent;
+        for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
+                snowball_platform_devs[i]->dev.parent = parent;
+
+        /* automatically probe child nodes of db8500 device */
+        of_platform_populate(NULL, u8500_soc_node, u8500_auxdata_lookup, parent);
+
+        if (of_machine_is_compatible("st-ericsson,mop500")) {
+                mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+                mop500_pins_init();
+
+                platform_add_devices(mop500_platform_devs,
+                                ARRAY_SIZE(mop500_platform_devs));
+
+                mop500_sdi_init(parent);
+        } else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+                snowball_pins_init();
+                platform_add_devices(snowball_platform_devs,
+                                ARRAY_SIZE(snowball_platform_devs));
+
+                snowball_sdi_init(parent);
+        } else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
+                /*
+                 * The HREFv60 board removed a GPIO expander and routed
+                 * all these GPIO pins to the internal GPIO controller
+                 * instead.
+                 */
+                mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+                i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
+                hrefv60_pins_init();
+                platform_add_devices(mop500_platform_devs,
+                                ARRAY_SIZE(mop500_platform_devs));
+
+                hrefv60_sdi_init(parent);
+        }
+        mop500_i2c_init(parent);
+
+        i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
+        i2c_register_board_info(2, mop500_i2c2_devices,
+                                ARRAY_SIZE(mop500_i2c2_devices));
+
+        /* This board has full regulator constraints */
+        regulator_has_full_constraints();
+}
+
+static const char * u8500_dt_board_compat[] = {
+        "calaosystems,snowball-a9500",
+        "st-ericsson,hrefv60+",
+        "st-ericsson,u8500",
+        "st-ericsson,mop500",
+        NULL,
+};
+
+
+DT_MACHINE_START(U8500_DT, "ST-Ericsson U8500 platform (Device Tree Support)")
+        .map_io         = u8500_map_io,
+        .init_irq       = ux500_init_irq,
+        /* we re-use nomadik timer here */
+        .timer          = &ux500_timer,
+        .handle_irq     = gic_handle_irq,
+        .init_machine   = u8500_init_machine,
+        .dt_compat      = u8500_dt_board_compat,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index da5569d83d58..77a75ed0df67 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -5,6 +5,8 @@
  */
 
 #include <linux/io.h>
+#include <linux/of.h>
+
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/hardware.h>
@@ -45,7 +47,10 @@ static int __init ux500_l2x0_init(void)
         ux500_l2x0_unlock();
 
         /* 64KB way size, 8 way associativity, force WA */
-        l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
+        if (of_have_populated_dt())
+                l2x0_of_init(0x3e060000, 0xc0000fff);
+        else
+                l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff);
 
         /*
          * We can't disable l2 as we are in non secure mode, currently
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 6242e88e5fd3..d11f3892a27d 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -16,6 +16,8 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/stat.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
 
 #include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
@@ -28,6 +30,11 @@
 
 void __iomem *_PRCMU_BASE;
 
+static const struct of_device_id ux500_dt_irq_match[] = {
+        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+        {},
+};
+
 void __init ux500_init_irq(void)
 {
         void __iomem *dist_base;
@@ -42,7 +49,12 @@ void __init ux500_init_irq(void)
         } else
                 ux500_unknown_soc();
 
-        gic_init(0, 29, dist_base, cpu_base);
+#ifdef CONFIG_OF
+        if (of_have_populated_dt())
+                of_irq_init(ux500_dt_irq_match);
+        else
+#endif
+                gic_init(0, 29, dist_base, cpu_base);
 
         /*
          * Init clocks here so that they are available for system timer
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index e9d580702fbb..d37df98b5c32 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -7,6 +7,7 @@
 #include <linux/io.h>
 #include <linux/errno.h>
 #include <linux/clksrc-dbx500-prcmu.h>
+#include <linux/of.h>
 
 #include <asm/smp_twd.h>
 
@@ -30,9 +31,13 @@ static void __init ux500_twd_init(void)
         twd_local_timer = cpu_is_u5500() ? &u5500_twd_local_timer :
                                            &u8500_twd_local_timer;
 
-        err = twd_local_timer_register(twd_local_timer);
-        if (err)
-                pr_err("twd_local_timer_register failed %d\n", err);
+        if (of_have_populated_dt())
+                twd_local_timer_of_register();
+        else {
+                err = twd_local_timer_register(twd_local_timer);
+                if (err)
+                        pr_err("twd_local_timer_register failed %d\n", err);
+        }
 }
 #else
 #define ux500_twd_init()        do { } while(0)
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index 089899a7db72..74daf5ed1432 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -21,6 +21,7 @@
 #include <plat/orion_wdt.h>
 #include <plat/mv_xor.h>
 #include <plat/ehci-orion.h>
+#include <mach/bridge-regs.h>
 
 /* Fill in the resources structure and link it into the platform
    device structure. There is always a memory region, and nearly
@@ -568,13 +569,17 @@ void __init orion_spi_1_init(unsigned long mapbase,
  ****************************************************************************/
 static struct orion_wdt_platform_data orion_wdt_data;
 
+static struct resource orion_wdt_resource =
+                DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+
 static struct platform_device orion_wdt_device = {
         .name           = "orion_wdt",
         .id             = -1,
         .dev            = {
                 .platform_data  = &orion_wdt_data,
         },
-        .num_resources  = 0,
+        .resource       = &orion_wdt_resource,
+        .num_resources  = 1,
 };
 
 void __init orion_wdt_init(unsigned long tclk)
diff --git a/arch/arm/plat-orion/include/plat/audio.h b/arch/arm/plat-orion/include/plat/audio.h
index 885f8abd927b..d6a55bd2e578 100644
--- a/arch/arm/plat-orion/include/plat/audio.h
+++ b/arch/arm/plat-orion/include/plat/audio.h
@@ -2,7 +2,6 @@
 #define __PLAT_AUDIO_H
 
 struct kirkwood_asoc_platform_data {
-        u32 tclk;
         int burst;
 };
 #endif