OMAP7XX: Update core omap1 files to use omap7xx.h

This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>

4 files changed, 19 insertions, 19 deletions

diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a7ead1b93226..e53f7748ac13 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void)
         /*
          * Hold GSM Reset until needed
          */
-        omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+        omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
         /*
          * UARTs -> done automagically by 8250 driver
@@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void)
          */
 
         /* Flash: CS0 timings setup */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-        omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+        omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
         /*
          * Ethernet support through the debug board
          * CS1 timings setup
          */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-        omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+        omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
         /*
          * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
          * It is used as the Ethernet controller interrupt
          */
-        omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+        omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 83406699f310..ec22838e8e79 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void)
         /*
          * Hold GSM Reset until needed
          */
-        omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+        omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
         /*
          * UARTs -> done automagically by 8250 driver
@@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void)
          */
 
         /* Flash: CS0 timings setup */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-        omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+        omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
         /*
          * Ethernet support through the debug board
          * CS1 timings setup
          */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-        omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+        omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
         /*
          * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
          * It is used as the Ethernet controller interrupt
          */
-        omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+        omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index fcbea61cb8ca..c24cc28238f9 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -862,7 +862,7 @@ int __init omap1_clk_init(void)
 
 #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
         /* Select slicer output as OMAP input clock */
-        omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+        omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
 #endif
 
         /* Amstrad Delta wants BCLK high when inactive */
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 19de57f74e84..157d5082ffea 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -39,14 +39,14 @@ static struct map_desc omap_io_desc[] __initdata = {
 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
 static struct map_desc omap730_io_desc[] __initdata = {
         {
-                .virtual        = OMAP730_DSP_BASE,
-                .pfn            = __phys_to_pfn(OMAP730_DSP_START),
-                .length         = OMAP730_DSP_SIZE,
+                .virtual        = OMAP7XX_DSP_BASE,
+                .pfn            = __phys_to_pfn(OMAP7XX_DSP_START),
+                .length         = OMAP7XX_DSP_SIZE,
                 .type           = MT_DEVICE
         }, {
-                .virtual        = OMAP730_DSPREG_BASE,
-                .pfn            = __phys_to_pfn(OMAP730_DSPREG_START),
-                .length         = OMAP730_DSPREG_SIZE,
+                .virtual        = OMAP7XX_DSPREG_BASE,
+                .pfn            = __phys_to_pfn(OMAP7XX_DSPREG_START),
+                .length         = OMAP7XX_DSPREG_SIZE,
                 .type           = MT_DEVICE
         }
 };