OMAP7XX: Update core omap1 files to use omap7xx.h

This patch is part of a series which removes references to omap730 in code
which is shared with omap850, replacing them with references to omap7xx.

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Reviewed-by: Zebediah C. McClure <zmc@lurian.net>

7 files changed, 33 insertions, 33 deletions

diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a7ead1b93226..e53f7748ac13 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void)
         /*
          * Hold GSM Reset until needed
          */
-        omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+        omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
         /*
          * UARTs -> done automagically by 8250 driver
@@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void)
          */
 
         /* Flash: CS0 timings setup */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-        omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+        omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
         /*
          * Ethernet support through the debug board
          * CS1 timings setup
          */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-        omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+        omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
         /*
          * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
          * It is used as the Ethernet controller interrupt
          */
-        omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+        omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 83406699f310..ec22838e8e79 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void)
         /*
          * Hold GSM Reset until needed
          */
-        omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+        omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
         /*
          * UARTs -> done automagically by 8250 driver
@@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void)
          */
 
         /* Flash: CS0 timings setup */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-        omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+        omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
         /*
          * Ethernet support through the debug board
          * CS1 timings setup
          */
-        omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-        omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+        omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+        omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
         /*
          * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
          * It is used as the Ethernet controller interrupt
          */
-        omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+        omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index fcbea61cb8ca..c24cc28238f9 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -862,7 +862,7 @@ int __init omap1_clk_init(void)
 
 #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
         /* Select slicer output as OMAP input clock */
-        omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
+        omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
 #endif
 
         /* Amstrad Delta wants BCLK high when inactive */
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 19de57f74e84..157d5082ffea 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -39,14 +39,14 @@ static struct map_desc omap_io_desc[] __initdata = {
 #if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
 static struct map_desc omap730_io_desc[] __initdata = {
         {
-                .virtual        = OMAP730_DSP_BASE,
-                .pfn            = __phys_to_pfn(OMAP730_DSP_START),
-                .length         = OMAP730_DSP_SIZE,
+                .virtual        = OMAP7XX_DSP_BASE,
+                .pfn            = __phys_to_pfn(OMAP7XX_DSP_START),
+                .length         = OMAP7XX_DSP_SIZE,
                 .type           = MT_DEVICE
         }, {
-                .virtual        = OMAP730_DSPREG_BASE,
-                .pfn            = __phys_to_pfn(OMAP730_DSPREG_START),
-                .length         = OMAP730_DSPREG_SIZE,
+                .virtual        = OMAP7XX_DSPREG_BASE,
+                .pfn            = __phys_to_pfn(OMAP7XX_DSPREG_START),
+                .length         = OMAP7XX_DSPREG_SIZE,
                 .type           = MT_DEVICE
         }
 };
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h
index 26c1fbff08aa..99c42412c0a1 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/mach/hardware.h
@@ -280,7 +280,7 @@
  * ---------------------------------------------------------------------------
  */
 
-#include "omap730.h"
+#include "omap7xx.h"
 #include "omap1510.h"
 #include "omap16xx.h"
 #include "omap24xx.h"
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 587fb63d2323..66ae302f0c0f 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -51,13 +51,13 @@
                                         .pu_pd_reg = PU_PD_SEL_##reg, \
                                         .pu_pd_val = status,
 
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
-                                        .mux_reg = OMAP730_IO_CONF_##reg, \
+#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+                                        .mux_reg = OMAP7XX_IO_CONF_##reg, \
                                         .mask_offset = mode_offset, \
                                         .mask = mode,
 
-#define PULL_REG_730(reg, bit, status)  .pull_name = "OMAP730_IO_CONF_"#reg, \
-                                        .pull_reg = OMAP730_IO_CONF_##reg, \
+#define PULL_REG_730(reg, bit, status)  .pull_name = "OMAP7XX_IO_CONF_"#reg, \
+                                        .pull_reg = OMAP7XX_IO_CONF_##reg, \
                                         .pull_bit = bit, \
                                         .pull_val = status,
 
@@ -75,11 +75,11 @@
                                         .pu_pd_val = status,
 
 #define MUX_REG_730(reg, mode_offset, mode) \
-                                        .mux_reg = OMAP730_IO_CONF_##reg, \
+                                        .mux_reg = OMAP7XX_IO_CONF_##reg, \
                                         .mask_offset = mode_offset, \
                                         .mask = mode,
 
-#define PULL_REG_730(reg, bit, status)  .pull_reg = OMAP730_IO_CONF_##reg, \
+#define PULL_REG_730(reg, bit, status)  .pull_reg = OMAP7XX_IO_CONF_##reg, \
                                         .pull_bit = bit, \
                                         .pull_val = status,
 
@@ -99,7 +99,7 @@
 
 /*
  * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
  * - for pull-up/down, only has one enable bit which is is in the same register
  *   as mux config
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index 388fd9490939..23a205f4a2b1 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -13,7 +13,7 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 
-#include <mach/omap730.h>
+#include <mach/omap7xx.h>
 #include <mach/omap1510.h>
 #include <mach/omap16xx.h>
 #include <mach/omap24xx.h>
@@ -34,12 +34,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
                         return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
         }
         if (cpu_is_omap7xx()) {
-                if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
-                        return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+                if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
+                        return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
 
-                if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
-                        return XLATE(p, OMAP730_DSPREG_BASE,
-                                        OMAP730_DSPREG_START);
+                if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
+                        return XLATE(p, OMAP7XX_DSPREG_BASE,
+                                        OMAP7XX_DSPREG_START);
         }
         if (cpu_is_omap15xx()) {
                 if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))