spi: efm32: properly namespace location property

While reviewing an i2c driver for efm32 that needs a similar property
Wolfram Sang pointed out that "location" is a too generic name for
something that is efm32 specific. So add an appropriate namespace and
fall back to the generic name in case of failure.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

1 files changed, 2 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt
index a590ca51be75..25c02ba530da 100644
--- a/Documentation/devicetree/bindings/spi/efm32-spi.txt
+++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt
@@ -8,7 +8,7 @@ Required properties:
 - interrupts: pair specifying rx and tx irq
 - clocks: phandle to the spi clock
 - cs-gpios: see spi-bus.txt
-- location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
+- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values.
 
 Example:
 
@@ -20,7 +20,7 @@ spi1: spi@0x4000c400 { /* USART1 */
         interrupts = <15 16>;
         clocks = <&cmu 20>;
         cs-gpios = <&gpio 51 1>; // D3
-        location = <1>;
+        efm32,location = <1>;
         status = "ok";
 
         ks8851@0 {