Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

847 files changed, 4303 insertions, 9420 deletions

diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 7337005ef5e1..cffc93d97f54 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -89,7 +89,7 @@ ID	Clock	Peripheral
 16      xor1    XOR DMA 1
 17      crypto  CESA engine
 18      pex1    PCIe Cntrl 1
-19      ge1     Gigabit Ethernet 0
+19      ge1     Gigabit Ethernet 1
 20      tdm     Time Division Mplx
 
 Required properties:
diff --git a/MAINTAINERS b/MAINTAINERS
index 22b754a8b4b3..f4da1b8314da 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4231,6 +4231,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 S:      Maintained
 T:      git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:      kernel/irq/
+F:      drivers/irqchip/
 
 IRQ DOMAINS (IRQ NUMBER MAPPING LIBRARY)
 M:      Benjamin Herrenschmidt <benh@kernel.crashing.org>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 09238c83e6d6..c038431f2567 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -344,10 +344,10 @@ config ARCH_BCM2835
         select ARM_ERRATA_411920
         select ARM_TIMER_SP804
         select CLKDEV_LOOKUP
+        select CLKSRC_OF
         select COMMON_CLK
         select CPU_V6
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select MULTI_IRQ_HANDLER
         select PINCTRL
         select PINCTRL_BCM2835
@@ -642,9 +642,9 @@ config ARCH_TEGRA
         select ARCH_HAS_CPUFREQ
         select CLKDEV_LOOKUP
         select CLKSRC_MMIO
+        select CLKSRC_OF
         select COMMON_CLK
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_CLK
         select HAVE_SMP
         select MIGHT_HAVE_CACHE_L2X0
@@ -744,7 +744,6 @@ config ARCH_S3C24XX
         select ARCH_HAS_CPUFREQ
         select ARCH_USES_GETTIMEOFFSET
         select CLKDEV_LOOKUP
-        select GENERIC_GPIO
         select HAVE_CLK
         select HAVE_S3C2410_I2C if I2C
         select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -787,7 +786,6 @@ config ARCH_S5P64X0
         select CLKSRC_MMIO
         select CPU_V6
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_CLK
         select HAVE_S3C2410_I2C if I2C
         select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -802,7 +800,6 @@ config ARCH_S5PC100
         select ARCH_USES_GETTIMEOFFSET
         select CLKDEV_LOOKUP
         select CPU_V7
-        select GENERIC_GPIO
         select HAVE_CLK
         select HAVE_S3C2410_I2C if I2C
         select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -820,7 +817,6 @@ config ARCH_S5PV210
         select CLKSRC_MMIO
         select CPU_V7
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_CLK
         select HAVE_S3C2410_I2C if I2C
         select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -838,7 +834,6 @@ config ARCH_EXYNOS
         select CLKDEV_LOOKUP
         select CPU_V7
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_CLK
         select HAVE_S3C2410_I2C if I2C
         select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -873,7 +868,6 @@ config ARCH_U300
         select COMMON_CLK
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_TCM
         select SPARSE_IRQ
         help
@@ -957,7 +951,6 @@ config ARCH_VT8500_SINGLE
         select COMMON_CLK
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_CLK
         select MULTI_IRQ_HANDLER
         select SPARSE_IRQ
@@ -1086,17 +1079,12 @@ source "arch/arm/mach-realview/Kconfig"
 source "arch/arm/mach-sa1100/Kconfig"
 
 source "arch/arm/plat-samsung/Kconfig"
-source "arch/arm/plat-s3c24xx/Kconfig"
 
 source "arch/arm/mach-socfpga/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
 source "arch/arm/mach-s3c24xx/Kconfig"
-if ARCH_S3C24XX
-source "arch/arm/mach-s3c2412/Kconfig"
-source "arch/arm/mach-s3c2440/Kconfig"
-endif
 
 if ARCH_S3C64XX
 source "arch/arm/mach-s3c64xx/Kconfig"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index fc2a591e1676..ad375a51a7d2 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -219,12 +219,12 @@ choice
                   Say Y here if you want kernel low-level debugging support
                   on i.MX51.
 
-        config DEBUG_IMX50_IMX53_UART
-                bool "i.MX50 and i.MX53 Debug UART"
-                depends on SOC_IMX50 || SOC_IMX53
+        config DEBUG_IMX53_UART
+                bool "i.MX53 Debug UART"
+                depends on SOC_IMX53
                 help
                   Say Y here if you want kernel low-level debugging support
-                  on i.MX50 or i.MX53.
+                  on i.MX53.
 
         config DEBUG_IMX6Q_UART
                 bool "i.MX6Q Debug UART"
@@ -497,7 +497,7 @@ config DEBUG_LL_INCLUDE
                                  DEBUG_IMX21_IMX27_UART || \
                                  DEBUG_IMX31_IMX35_UART || \
                                  DEBUG_IMX51_UART || \
-                                 DEBUG_IMX50_IMX53_UART ||\
+                                 DEBUG_IMX53_UART ||\
                                  DEBUG_IMX6Q_UART
         default "debug/highbank.S" if DEBUG_HIGHBANK_UART
         default "debug/mvebu.S" if DEBUG_MVEBU_UART
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 4bcd2d6b0535..1b7071681a5e 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_PRIMA2)		+= prima2
 machine-$(CONFIG_ARCH_PXA)              += pxa
 machine-$(CONFIG_ARCH_REALVIEW)         += realview
 machine-$(CONFIG_ARCH_RPC)              += rpc
-machine-$(CONFIG_ARCH_S3C24XX)          += s3c24xx s3c2412 s3c2440
+machine-$(CONFIG_ARCH_S3C24XX)          += s3c24xx
 machine-$(CONFIG_ARCH_S3C64XX)          += s3c64xx
 machine-$(CONFIG_ARCH_S5P64X0)          += s5p64x0
 machine-$(CONFIG_ARCH_S5PC100)          += s5pc100
@@ -204,7 +204,7 @@ plat-$(CONFIG_ARCH_S3C64XX)	+= samsung
 plat-$(CONFIG_PLAT_IOP)         += iop
 plat-$(CONFIG_PLAT_ORION)       += orion
 plat-$(CONFIG_PLAT_PXA)         += pxa
-plat-$(CONFIG_PLAT_S3C24XX)     += s3c24xx samsung
+plat-$(CONFIG_PLAT_S3C24XX)     += samsung
 plat-$(CONFIG_PLAT_S5P)         += samsung
 plat-$(CONFIG_PLAT_SPEAR)       += spear
 plat-$(CONFIG_PLAT_VERSATILE)   += versatile
diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c
index 9deb56a702ce..24b0475cb8bf 100644
--- a/arch/arm/boot/compressed/decompress.c
+++ b/arch/arm/boot/compressed/decompress.c
@@ -13,8 +13,6 @@ extern void error(char *);
 #define STATIC static
 #define STATIC_RW_DATA  /* non-static please */
 
-#define ARCH_HAS_DECOMP_WDOG
-
 /* Diagnostic functions */
 #ifdef DEBUG
 #  define Assert(cond,msg) {if(!(cond)) error(msg);}
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 45ceeb0e93e0..9353184d730d 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -1,26 +1,3 @@
-config ARM_GIC
-        bool
-        select IRQ_DOMAIN
-        select MULTI_IRQ_HANDLER
-
-config GIC_NON_BANKED
-        bool
-
-config ARM_VIC
-        bool
-        select IRQ_DOMAIN
-        select MULTI_IRQ_HANDLER
-
-config ARM_VIC_NR
-        int
-        default 4 if ARCH_S5PV210
-        default 3 if ARCH_S5PC100
-        default 2
-        depends on ARM_VIC
-        help
-          The maximum number of VICs available in the system, for
-          power management.
-
 config ICST
         bool
 
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e8a4e58f1b82..dc8dd0de5c0f 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -2,8 +2,6 @@
 # Makefile for the linux kernel.
 #
 
-obj-$(CONFIG_ARM_GIC)           += gic.o
-obj-$(CONFIG_ARM_VIC)           += vic.o
 obj-$(CONFIG_ICST)              += icst.o
 obj-$(CONFIG_SA1111)            += sa1111.o
 obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig
index c5212f43eee6..36fed66bd4b5 100644
--- a/arch/arm/configs/at91sam9263_defconfig
+++ b/arch/arm/configs/at91sam9263_defconfig
@@ -18,7 +18,6 @@ CONFIG_ARCH_AT91=y
 CONFIG_ARCH_AT91SAM9263=y
 CONFIG_MACH_AT91SAM9263EK=y
 CONFIG_MACH_USB_A9263=y
-CONFIG_MACH_NEOCORE926=y
 CONFIG_MTD_AT91_DATAFLASH_CARD=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_AEABI=y
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 69667133321f..6dddbf877b0c 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -32,7 +32,6 @@ CONFIG_MACH_PCM043=y
 CONFIG_MACH_MX35_3DS=y
 CONFIG_MACH_VPR200=y
 CONFIG_MACH_IMX51_DT=y
-CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_SOC_IMX53=y
 CONFIG_SOC_IMX6Q=y
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 917d4fcfd9b4..308ad7d6f98b 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -12,7 +12,6 @@
 
 struct tag;
 struct meminfo;
-struct sys_timer;
 struct pt_regs;
 struct smp_operations;
 #ifdef CONFIG_SMP
@@ -48,7 +47,7 @@ struct machine_desc {
         void                    (*map_io)(void);/* IO mapping function  */
         void                    (*init_early)(void);
         void                    (*init_irq)(void);
-        struct sys_timer        *timer;         /* system tick timer    */
+        void                    (*init_time)(void);
         void                    (*init_machine)(void);
         void                    (*init_late)(void);
 #ifdef CONFIG_MULTI_IRQ_HANDLER
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index 15cb035309f7..18c883023339 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -22,6 +22,7 @@ extern int show_fiq_list(struct seq_file *, int);
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 extern void (*handle_arch_irq)(struct pt_regs *);
+extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
 #endif
 
 /*
diff --git a/arch/arm/include/asm/mach/time.h b/arch/arm/include/asm/mach/time.h
index 6ca945f534ab..90c12e1e695c 100644
--- a/arch/arm/include/asm/mach/time.h
+++ b/arch/arm/include/asm/mach/time.h
@@ -10,36 +10,6 @@
 #ifndef __ASM_ARM_MACH_TIME_H
 #define __ASM_ARM_MACH_TIME_H
 
-/*
- * This is our kernel timer structure.
- *
- * - init
- *   Initialise the kernels jiffy timer source, claim interrupt
- *   using setup_irq.  This is called early on during initialisation
- *   while interrupts are still disabled on the local CPU.
- * - suspend
- *   Suspend the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled, after all normal devices
- *   have been suspended.  If no action is required, set this to
- *   NULL.
- * - resume
- *   Resume the kernel jiffy timer source, if necessary.  This
- *   is called with interrupts disabled before any normal devices
- *   are resumed.  If no action is required, set this to NULL.
- * - offset
- *   Return the timer offset in microseconds since the last timer
- *   interrupt.  Note: this must take account of any unprocessed
- *   timer interrupt which may be pending.
- */
-struct sys_timer {
-        void                    (*init)(void);
-        void                    (*suspend)(void);
-        void                    (*resume)(void);
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-        unsigned long           (*offset)(void);
-#endif
-};
-
 extern void timer_tick(void);
 
 struct timespec;
diff --git a/arch/arm/include/debug/imx.S b/arch/arm/include/debug/imx.S
index 0c4e17d4d359..c6f294cf18f0 100644
--- a/arch/arm/include/debug/imx.S
+++ b/arch/arm/include/debug/imx.S
@@ -34,7 +34,7 @@
 #define UART_PADDR      0x43f90000
 #elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR      0x73fbc000
-#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
+#elif defined (CONFIG_DEBUG_IMX53_UART)
 #define UART_PADDR      0x53fbc000
 #elif defined (CONFIG_DEBUG_IMX6Q_UART)
 #define UART_PADDR      IMX6Q_DEBUG_UART_BASE
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 896165096d6a..8e4ef4c83a74 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -117,6 +117,16 @@ void __init init_IRQ(void)
         machine_desc->init_irq();
 }
 
+#ifdef CONFIG_MULTI_IRQ_HANDLER
+void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
+{
+        if (handle_arch_irq)
+                return;
+
+        handle_arch_irq = handle_irq;
+}
+#endif
+
 #ifdef CONFIG_SPARSE_IRQ
 int __init arch_probe_nr_irqs(void)
 {
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 365c8d92e2eb..60340fa561d4 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -401,7 +401,8 @@ static void (*smp_cross_call)(const struct cpumask *, unsigned int);
 
 void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int))
 {
-        smp_cross_call = fn;
+        if (!smp_cross_call)
+                smp_cross_call = fn;
 }
 
 void arch_send_call_function_ipi_mask(const struct cpumask *mask)
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index ae0c7bb39ae8..c092115d903a 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -24,7 +24,6 @@
 
 #include <asm/smp_twd.h>
 #include <asm/localtimer.h>
-#include <asm/hardware/gic.h>
 
 /* set up by the platform code */
 static void __iomem *twd_base;
diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c
index 09be0c3c9069..955d92d265e5 100644
--- a/arch/arm/kernel/time.c
+++ b/arch/arm/kernel/time.c
@@ -21,7 +21,6 @@
 #include <linux/timex.h>
 #include <linux/errno.h>
 #include <linux/profile.h>
-#include <linux/syscore_ops.h>
 #include <linux/timer.h>
 #include <linux/irq.h>
 
@@ -31,11 +30,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-/*
- * Our system timer.
- */
-static struct sys_timer *system_timer;
-
 #if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE) || \
     defined(CONFIG_NVRAM) || defined(CONFIG_NVRAM_MODULE)
 /* this needs a better home */
@@ -69,16 +63,6 @@ unsigned long profile_pc(struct pt_regs *regs)
 EXPORT_SYMBOL(profile_pc);
 #endif
 
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-u32 arch_gettimeoffset(void)
-{
-        if (system_timer->offset != NULL)
-                return system_timer->offset() * 1000;
-
-        return 0;
-}
-#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
-
 #ifndef CONFIG_GENERIC_CLOCKEVENTS
 /*
  * Kernel system timer support.
@@ -129,43 +113,8 @@ int __init register_persistent_clock(clock_access_fn read_boot,
         return -EINVAL;
 }
 
-#if defined(CONFIG_PM) && !defined(CONFIG_GENERIC_CLOCKEVENTS)
-static int timer_suspend(void)
-{
-        if (system_timer->suspend)
-                system_timer->suspend();
-
-        return 0;
-}
-
-static void timer_resume(void)
-{
-        if (system_timer->resume)
-                system_timer->resume();
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct syscore_ops timer_syscore_ops = {
-        .suspend        = timer_suspend,
-        .resume         = timer_resume,
-};
-
-static int __init timer_init_syscore_ops(void)
-{
-        register_syscore_ops(&timer_syscore_ops);
-
-        return 0;
-}
-
-device_initcall(timer_init_syscore_ops);
-
 void __init time_init(void)
 {
-        system_timer = machine_desc->timer;
-        system_timer->init();
+        machine_desc->init_time();
         sched_clock_postinit();
 }
-
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 958358c91afd..6071f4c3d654 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -352,12 +352,6 @@ config MACH_USB_A9263
           Select this if you are using a Calao Systems USB-A9263.
           <http://www.calao-systems.com>
 
-config MACH_NEOCORE926
-        bool "Adeneo NEOCORE926"
-        select HAVE_AT91_DATAFLASH_CARD
-        help
-          Select this if you are using the Adeneo Neocore 926 board.
-
 endif
 
 # ----------------------------------------------------------
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index b38a1dcb79b8..39218ca6d8e8 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -66,7 +66,6 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
 obj-$(CONFIG_MACH_USB_A9263)    += board-usb-a926x.o
-obj-$(CONFIG_MACH_NEOCORE926)   += board-neocore926.o
 
 # AT91SAM9RL board-specific support
 obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index cafe98836c8a..2acdff4c1dfe 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -174,7 +174,6 @@ clkevt32k_next_event(unsigned long delta, struct clock_event_device *dev)
 static struct clock_event_device clkevt = {
         .name           = "at91_tick",
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .rating         = 150,
         .set_next_event = clkevt32k_next_event,
         .set_mode       = clkevt32k_mode,
@@ -265,17 +264,10 @@ void __init at91rm9200_timer_init(void)
         at91_st_write(AT91_ST_RTMR, 1);
 
         /* Setup timer clockevent, with minimum of two ticks (important!!) */
-        clkevt.mult = div_sc(AT91_SLOW_CLOCK, NSEC_PER_SEC, clkevt.shift);
-        clkevt.max_delta_ns = clockevent_delta2ns(AT91_ST_ALMV, &clkevt);
-        clkevt.min_delta_ns = clockevent_delta2ns(2, &clkevt) + 1;
         clkevt.cpumask = cpumask_of(0);
-        clockevents_register_device(&clkevt);
+        clockevents_config_and_register(&clkevt, AT91_SLOW_CLOCK,
+                                        2, AT91_ST_ALMV);
 
         /* register clocksource */
         clocksource_register_hz(&clk32k, AT91_SLOW_CLOCK);
 }
-
-struct sys_timer at91rm9200_timer = {
-        .init           = at91rm9200_timer_init,
-};
-
diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c
index 358412f1f5f8..3a4bc2e1a65e 100644
--- a/arch/arm/mach-at91/at91sam926x_time.c
+++ b/arch/arm/mach-at91/at91sam926x_time.c
@@ -104,12 +104,38 @@ pit_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         }
 }
 
+static void at91sam926x_pit_suspend(struct clock_event_device *cedev)
+{
+        /* Disable timer */
+        pit_write(AT91_PIT_MR, 0);
+}
+
+static void at91sam926x_pit_reset(void)
+{
+        /* Disable timer and irqs */
+        pit_write(AT91_PIT_MR, 0);
+
+        /* Clear any pending interrupts, wait for PIT to stop counting */
+        while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
+                cpu_relax();
+
+        /* Start PIT but don't enable IRQ */
+        pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
+}
+
+static void at91sam926x_pit_resume(struct clock_event_device *cedev)
+{
+        at91sam926x_pit_reset();
+}
+
 static struct clock_event_device pit_clkevt = {
         .name           = "pit",
         .features       = CLOCK_EVT_FEAT_PERIODIC,
         .shift          = 32,
         .rating         = 100,
         .set_mode       = pit_clkevt_mode,
+        .suspend        = at91sam926x_pit_suspend,
+        .resume         = at91sam926x_pit_resume,
 };
 
 
@@ -150,19 +176,6 @@ static struct irqaction at91sam926x_pit_irq = {
         .irq            = NR_IRQS_LEGACY + AT91_ID_SYS,
 };
 
-static void at91sam926x_pit_reset(void)
-{
-        /* Disable timer and irqs */
-        pit_write(AT91_PIT_MR, 0);
-
-        /* Clear any pending interrupts, wait for PIT to stop counting */
-        while (PIT_CPIV(pit_read(AT91_PIT_PIVR)) != 0)
-                cpu_relax();
-
-        /* Start PIT but don't enable IRQ */
-        pit_write(AT91_PIT_MR, (pit_cycle - 1) | AT91_PIT_PITEN);
-}
-
 #ifdef CONFIG_OF
 static struct of_device_id pit_timer_ids[] = {
         { .compatible = "atmel,at91sam9260-pit" },
@@ -211,7 +224,7 @@ static int __init of_at91sam926x_pit_init(void)
 /*
  * Set up both clocksource and clockevent support.
  */
-static void __init at91sam926x_pit_init(void)
+void __init at91sam926x_pit_init(void)
 {
         unsigned long   pit_rate;
         unsigned        bits;
@@ -250,12 +263,6 @@ static void __init at91sam926x_pit_init(void)
         clockevents_register_device(&pit_clkevt);
 }
 
-static void at91sam926x_pit_suspend(void)
-{
-        /* Disable timer */
-        pit_write(AT91_PIT_MR, 0);
-}
-
 void __init at91sam926x_ioremap_pit(u32 addr)
 {
 #if defined(CONFIG_OF)
@@ -272,9 +279,3 @@ void __init at91sam926x_ioremap_pit(u32 addr)
         if (!pit_base_addr)
                 panic("Impossible to ioremap PIT\n");
 }
-
-struct sys_timer at91sam926x_timer = {
-        .init           = at91sam926x_pit_init,
-        .suspend        = at91sam926x_pit_suspend,
-        .resume         = at91sam926x_pit_reset,
-};
diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c
index 0e57e440c061..0c07a4459cb2 100644
--- a/arch/arm/mach-at91/at91x40_time.c
+++ b/arch/arm/mach-at91/at91x40_time.c
@@ -42,9 +42,10 @@
 #define AT91_TC_CLK1BASE        0x40
 #define AT91_TC_CLK2BASE        0x80
 
-static unsigned long at91x40_gettimeoffset(void)
+static u32 at91x40_gettimeoffset(void)
 {
-        return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 / (AT91X40_MASTER_CLOCK / 128));
+        return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
+                (AT91X40_MASTER_CLOCK / 128)) * 1000;
 }
 
 static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
@@ -64,6 +65,8 @@ void __init at91x40_timer_init(void)
 {
         unsigned int v;
 
+        arch_gettimeoffset = at91x40_gettimeoffset;
+
         at91_tc_write(AT91_TC_BCR, 0);
         v = at91_tc_read(AT91_TC_BMR);
         v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
@@ -79,9 +82,3 @@ void __init at91x40_timer_init(void)
 
         at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
 }
-
-struct sys_timer at91x40_timer = {
-        .init   = at91x40_timer_init,
-        .offset = at91x40_gettimeoffset,
-};
-
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index b99b5752cc10..35ab632bbf68 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -90,7 +90,7 @@ static void __init onearm_board_init(void)
 
 MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
         /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = onearm_init_early,
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 854b97974287..f95e31cda4b3 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -210,7 +210,7 @@ static void __init afeb9260_board_init(void)
 
 MACHINE_START(AFEB9260, "Custom afeb9260 board")
         /* Maintainer: Sergey Lapin <slapin@ossfans.org> */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = afeb9260_init_early,
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index 28a18ce6d914..ade948b82662 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -187,7 +187,7 @@ static void __init cam60_board_init(void)
 
 MACHINE_START(CAM60, "KwikByte CAM60")
         /* Maintainer: KwikByte */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = cam60_init_early,
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c17bb533a949..92983050a9bd 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -157,7 +157,7 @@ static void __init carmeva_board_init(void)
 
 MACHINE_START(CARMEVA, "Carmeva")
         /* Maintainer: Conitec Datasystems */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = carmeva_init_early,
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index 847432441ecc..008527efdbcf 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -374,7 +374,7 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
 MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
 #endif
         /* Maintainer: Eric Benard - EUKREA Electromatique */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = cpu9krea_init_early,
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2a7af7868747..42f1353a4baf 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -178,7 +178,7 @@ static void __init cpuat91_board_init(void)
 
 MACHINE_START(CPUAT91, "Eukrea")
         /* Maintainer: Eric Benard - EUKREA Electromatique */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = cpuat91_init_early,
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 48a531e05be3..e5fde215225b 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -251,7 +251,7 @@ static void __init csb337_board_init(void)
 
 MACHINE_START(CSB337, "Cogent CSB337")
         /* Maintainer: Bill Gatliff */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = csb337_init_early,
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index ec0f3abd504b..fdf11061c577 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -132,7 +132,7 @@ static void __init csb637_board_init(void)
 
 MACHINE_START(CSB637, "Cogent CSB637")
         /* Maintainer: Bill Gatliff */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = csb637_init_early,
diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c
index 881170ce61dd..8db30132abed 100644
--- a/arch/arm/mach-at91/board-dt.c
+++ b/arch/arm/mach-at91/board-dt.c
@@ -49,7 +49,7 @@ static const char *at91_dt_board_compat[] __initdata = {
 
 DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = at91_dt_initialize,
diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c
index b489388a6f84..becf0a6a289e 100644
--- a/arch/arm/mach-at91/board-eb01.c
+++ b/arch/arm/mach-at91/board-eb01.c
@@ -44,7 +44,7 @@ static void __init at91eb01_init_early(void)
 
 MACHINE_START(AT91EB01, "Atmel AT91 EB01")
         /* Maintainer: Greg Ungerer <gerg@snapgear.com> */
-        .timer          = &at91x40_timer,
+        .init_time      = at91x40_timer_init,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = at91eb01_init_early,
         .init_irq       = at91eb01_init_irq,
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 9f5e71c95f05..f9be8161bbfa 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -116,7 +116,7 @@ static void __init eb9200_board_init(void)
 }
 
 MACHINE_START(ATEB9200, "Embest ATEB9200")
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = eb9200_init_early,
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index ef69e0ebe949..b2fcd71262ba 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -181,7 +181,7 @@ static void __init ecb_at91board_init(void)
 
 MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
         /* Maintainer: emQbit.com */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ecb_at91init_early,
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 50f3d3795c05..77de410efc90 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -149,7 +149,7 @@ static void __init eco920_board_init(void)
 
 MACHINE_START(ECO920, "eco920")
         /* Maintainer: Sascha Hauer */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = eco920_init_early,
diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c
index 5d44eba0f20f..737c08563628 100644
--- a/arch/arm/mach-at91/board-flexibity.c
+++ b/arch/arm/mach-at91/board-flexibity.c
@@ -159,7 +159,7 @@ static void __init flexibity_board_init(void)
 
 MACHINE_START(FLEXIBITY, "Flexibity Connect")
         /* Maintainer: Maxim Osipov */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = flexibity_init_early,
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index 191d37c16bab..2ea7059b840b 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -261,7 +261,7 @@ static void __init foxg20_board_init(void)
 
 MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20")
         /* Maintainer: Sergio Tanzilli */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = foxg20_init_early,
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 23a2fa17ab29..c1d61d247790 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -574,7 +574,7 @@ static void __init gsia18s_board_init(void)
 }
 
 MACHINE_START(GSIA18S, "GS_IA18_S")
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = gsia18s_init_early,
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 9a43d1e1a037..88e2f5d2d16d 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -103,7 +103,7 @@ static void __init kafa_board_init(void)
 
 MACHINE_START(KAFA, "Sperry-Sun KAFA")
         /* Maintainer: Sergei Sharonov */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = kafa_init_early,
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index f168bec2369f..0c519d9ebffc 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -149,7 +149,7 @@ static void __init kb9202_board_init(void)
 
 MACHINE_START(KB9200, "KB920x")
         /* Maintainer: KwikByte, Inc. */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = kb9202_init_early,
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
deleted file mode 100644
index bc7a1c4a1f6a..000000000000
--- a/arch/arm/mach-at91/board-neocore926.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-neocore926.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation
- *  Copyright (C) 2008 ADENEO.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init neocore926_init_early(void)
-{
-        /* Initialize processor: 20 MHz crystal */
-        at91_initialize(20000000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata neocore926_usbh_data = {
-        .ports          = 2,
-        .vbus_pin       = { AT91_PIN_PA24, AT91_PIN_PA21 },
-        .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata neocore926_udc_data = {
-        .vbus_pin       = AT91_PIN_PA25,
-        .pullup_pin     = -EINVAL,              /* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
-        return !at91_get_gpio_value(AT91_PIN_PA15);     /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
-        .model                  = 7843,
-        .x_min                  = 150,
-        .x_max                  = 3830,
-        .y_min                  = 190,
-        .y_max                  = 3830,
-        .vref_delay_usecs       = 100,
-        .x_plate_ohms           = 450,
-        .y_plate_ohms           = 250,
-        .pressure_max           = 15000,
-        .debounce_max           = 1,
-        .debounce_rep           = 0,
-        .debounce_tol           = (~0),
-        .get_pendown_state      = ads7843_pendown_state,
-};
-
-static void __init neocore926_add_device_ts(void)
-{
-        at91_set_B_periph(AT91_PIN_PA15, 1);    /* External IRQ1, with pullup */
-        at91_set_gpio_input(AT91_PIN_PC13, 1);  /* Touchscreen BUSY signal */
-}
-#else
-static void __init neocore926_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info neocore926_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
-        {       /* DataFlash card */
-                .modalias       = "mtd_dataflash",
-                .chip_select    = 0,
-                .max_speed_hz   = 15 * 1000 * 1000,
-                .bus_num        = 0,
-        },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-        {
-                .modalias       = "ads7846",
-                .chip_select    = 1,
-                .max_speed_hz   = 125000 * 16,
-                .bus_num        = 0,
-                .platform_data  = &ads_info,
-                .irq            = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
-        },
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata neocore926_mci0_data = {
-        .slot[0] = {
-                .bus_width      = 4,
-                .detect_pin     = AT91_PIN_PE18,
-                .wp_pin         = AT91_PIN_PE19,
-        },
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata neocore926_macb_data = {
-        .phy_irq_pin    = AT91_PIN_PE31,
-        .is_rmii        = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata neocore926_nand_partition[] = {
-        {
-                .name   = "Linux Kernel",       /* "Partition 1", */
-                .offset = 0,
-                .size   = SZ_8M,
-        },
-        {
-                .name   = "Filesystem",         /* "Partition 2", */
-                .offset = MTDPART_OFS_NXTBLK,
-                .size   = SZ_32M,
-        },
-        {
-                .name   = "Free",               /* "Partition 3", */
-                .offset = MTDPART_OFS_NXTBLK,
-                .size   = MTDPART_SIZ_FULL,
-        },
-};
-
-static struct atmel_nand_data __initdata neocore926_nand_data = {
-        .ale                    = 21,
-        .cle                    = 22,
-        .rdy_pin                = AT91_PIN_PB19,
-        .rdy_pin_active_low     = 1,
-        .enable_pin             = AT91_PIN_PD15,
-        .ecc_mode               = NAND_ECC_SOFT,
-        .parts                  = neocore926_nand_partition,
-        .num_parts              = ARRAY_SIZE(neocore926_nand_partition),
-        .det_pin                = -EINVAL,
-};
-
-static struct sam9_smc_config __initdata neocore926_nand_smc_config = {
-        .ncs_read_setup         = 0,
-        .nrd_setup              = 1,
-        .ncs_write_setup        = 0,
-        .nwe_setup              = 1,
-
-        .ncs_read_pulse         = 4,
-        .nrd_pulse              = 4,
-        .ncs_write_pulse        = 4,
-        .nwe_pulse              = 4,
-
-        .read_cycle             = 6,
-        .write_cycle            = 6,
-
-        .mode                   = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-        .tdf_cycles             = 2,
-};
-
-static void __init neocore926_add_device_nand(void)
-{
-        /* configure chip-select 3 (NAND) */
-        sam9_smc_configure(0, 3, &neocore926_nand_smc_config);
-
-        at91_add_device_nand(&neocore926_nand_data);
-}
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
-        {
-                .name           = "TX09D50VM1CCA @ 60",
-                .refresh        = 60,
-                .xres           = 240,          .yres           = 320,
-                .pixclock       = KHZ2PICOS(5000),
-
-                .left_margin    = 1,            .right_margin   = 33,
-                .upper_margin   = 1,            .lower_margin   = 0,
-                .hsync_len      = 5,            .vsync_len      = 1,
-
-                .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-                .vmode          = FB_VMODE_NONINTERLACED,
-        },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
-        .manufacturer   = "HIT",
-        .monitor        = "TX09D70VM1CCA",
-
-        .modedb         = at91_tft_vga_modes,
-        .modedb_len     = ARRAY_SIZE(at91_tft_vga_modes),
-        .hfmin          = 15000,
-        .hfmax          = 64000,
-        .vfmin          = 50,
-        .vfmax          = 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
-                                        | ATMEL_LCDC_DISTYPE_TFT \
-                                        | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(int on)
-{
-        at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data = {
-        .lcdcon_is_backlight            = true,
-        .default_bpp                    = 16,
-        .default_dmacon                 = ATMEL_LCDC_DMAEN,
-        .default_lcdcon2                = AT91SAM9263_DEFAULT_LCDCON2,
-        .default_monspecs               = &at91fb_default_monspecs,
-        .atmel_lcdfb_power_control      = at91_lcdc_power_control,
-        .guard_time                     = 1,
-        .lcd_wiring_mode                = ATMEL_LCDC_WIRING_RGB555,
-};
-
-#else
-static struct atmel_lcdfb_info __initdata neocore926_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button neocore926_buttons[] = {
-        {       /* BP1, "leftclic" */
-                .code           = BTN_LEFT,
-                .gpio           = AT91_PIN_PC5,
-                .active_low     = 1,
-                .desc           = "left_click",
-                .wakeup         = 1,
-        },
-        {       /* BP2, "rightclic" */
-                .code           = BTN_RIGHT,
-                .gpio           = AT91_PIN_PC4,
-                .active_low     = 1,
-                .desc           = "right_click",
-                .wakeup         = 1,
-        },
-};
-
-static struct gpio_keys_platform_data neocore926_button_data = {
-        .buttons        = neocore926_buttons,
-        .nbuttons       = ARRAY_SIZE(neocore926_buttons),
-};
-
-static struct platform_device neocore926_button_device = {
-        .name           = "gpio-keys",
-        .id             = -1,
-        .num_resources  = 0,
-        .dev            = {
-                .platform_data  = &neocore926_button_data,
-        }
-};
-
-static void __init neocore926_add_device_buttons(void)
-{
-        at91_set_GPIO_periph(AT91_PIN_PC5, 0);  /* left button */
-        at91_set_deglitch(AT91_PIN_PC5, 1);
-        at91_set_GPIO_periph(AT91_PIN_PC4, 0);  /* right button */
-        at91_set_deglitch(AT91_PIN_PC4, 1);
-
-        platform_device_register(&neocore926_button_device);
-}
-#else
-static void __init neocore926_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- */
-static struct ac97c_platform_data neocore926_ac97_data = {
-        .reset_pin      = AT91_PIN_PA13,
-};
-
-
-static void __init neocore926_board_init(void)
-{
-        /* Serial */
-        /* DBGU on ttyS0. (Rx & Tx only) */
-        at91_register_uart(0, 0, 0);
-
-        /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
-        at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-        at91_add_device_serial();
-
-        /* USB Host */
-        at91_add_device_usbh(&neocore926_usbh_data);
-
-        /* USB Device */
-        at91_add_device_udc(&neocore926_udc_data);
-
-        /* SPI */
-        at91_set_gpio_output(AT91_PIN_PE20, 1);         /* select spi0 clock */
-        at91_add_device_spi(neocore926_spi_devices, ARRAY_SIZE(neocore926_spi_devices));
-
-        /* Touchscreen */
-        neocore926_add_device_ts();
-
-        /* MMC */
-        at91_add_device_mci(0, &neocore926_mci0_data);
-
-        /* Ethernet */
-        at91_add_device_eth(&neocore926_macb_data);
-
-        /* NAND */
-        neocore926_add_device_nand();
-
-        /* I2C */
-        at91_add_device_i2c(NULL, 0);
-
-        /* LCD Controller */
-        at91_add_device_lcdc(&neocore926_lcdc_data);
-
-        /* Push Buttons */
-        neocore926_add_device_buttons();
-
-        /* AC97 */
-        at91_add_device_ac97(&neocore926_ac97_data);
-}
-
-MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
-        /* Maintainer: ADENEO */
-        .timer          = &at91sam926x_timer,
-        .map_io         = at91_map_io,
-        .handle_irq     = at91_aic_handle_irq,
-        .init_early     = neocore926_init_early,
-        .init_irq       = at91_init_irq_default,
-        .init_machine   = neocore926_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 0299554495dd..65c0d6b5ecba 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -217,7 +217,7 @@ static void __init pcontrol_g20_board_init(void)
 
 MACHINE_START(PCONTROL_G20, "PControl G20")
         /* Maintainer: pgsellmann@portner-elektronik.at */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = pcontrol_g20_init_early,
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 4938f1cd5e13..ab2b2ec36c14 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -119,7 +119,7 @@ static void __init picotux200_board_init(void)
 
 MACHINE_START(PICOTUX2XX, "picotux 200")
         /* Maintainer: Kleinhenz Elektronik GmbH */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = picotux200_init_early,
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 33b1628467ea..aa3bc9b0f150 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -257,7 +257,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
         /* Maintainer: calao-systems */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200-dt.c b/arch/arm/mach-at91/board-rm9200-dt.c
index 5f9ce3da3fde..3fcb6623a33e 100644
--- a/arch/arm/mach-at91/board-rm9200-dt.c
+++ b/arch/arm/mach-at91/board-rm9200-dt.c
@@ -47,7 +47,7 @@ static const char *at91rm9200_dt_board_compat[] __initdata = {
 };
 
 DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = at91rm9200_dt_initialize,
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 9e5061bef0d0..690541b18cbc 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -219,7 +219,7 @@ static void __init dk_board_init(void)
 
 MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
         /* Maintainer: SAN People/Atmel */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = dk_init_early,
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 58277dbc718f..8b17dadc1aba 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -186,7 +186,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
         /* Maintainer: SAN People/Atmel */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index 2e8b8339a206..f6d7f1958c7e 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -222,7 +222,7 @@ static void __init rsi_ews_board_init(void)
 
 MACHINE_START(RSI_EWS, "RSI EWS")
         /* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = rsi_ews_init_early,
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index b75fbf6003a1..43ee4dc43b50 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -218,7 +218,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
         /* Maintainer: Olimex */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index f0135cd1d858..0b153c87521d 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -343,7 +343,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 13ebaa8e4100..b446645c7727 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -612,7 +612,7 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
 MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
 #endif
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 89b9608742a7..3284df05df14 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -443,7 +443,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 1b7dd9f688d3..f9cd1f2c7146 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -409,7 +409,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
@@ -419,7 +419,7 @@ MACHINE_END
 
 MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index e4cc375e3a32..2a94896a1375 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -502,7 +502,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 377a1097afa7..aa265dcf2128 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -320,7 +320,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
         /* Maintainer: Atmel */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 98771500ddb9..3aaa9784cf0e 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -177,7 +177,7 @@ static void __init snapper9260_board_init(void)
 }
 
 MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = snapper9260_init_early,
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 48a962b61fa3..a033b8df9fb2 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -272,7 +272,7 @@ static void __init stamp9g20evb_board_init(void)
 
 MACHINE_START(PORTUXG20, "taskit PortuxG20")
         /* Maintainer: taskit GmbH */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = stamp9g20_init_early,
@@ -282,7 +282,7 @@ MACHINE_END
 
 MACHINE_START(STAMP9G20, "taskit Stamp9G20")
         /* Maintainer: taskit GmbH */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = stamp9g20_init_early,
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index c1060f96e589..2487d944a1bc 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -355,7 +355,7 @@ static void __init ek_board_init(void)
 
 MACHINE_START(USB_A9263, "CALAO USB_A9263")
         /* Maintainer: calao-systems */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
@@ -365,7 +365,7 @@ MACHINE_END
 
 MACHINE_START(USB_A9260, "CALAO USB_A9260")
         /* Maintainer: calao-systems */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
@@ -375,7 +375,7 @@ MACHINE_END
 
 MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
         /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
-        .timer          = &at91sam926x_timer,
+        .init_time      = at91sam926x_pit_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = ek_init_early,
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 8673aebcb85d..be083771df2e 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -587,7 +587,7 @@ static void __init yl9200_board_init(void)
 
 MACHINE_START(YL9200, "uCdragon YL-9200")
         /* Maintainer: S.Birtles */
-        .timer          = &at91rm9200_timer,
+        .init_time      = at91rm9200_timer_init,
         .map_io         = at91_map_io,
         .handle_irq     = at91_aic_handle_irq,
         .init_early     = yl9200_init_early,
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index fc593d615e7d..78ab06548658 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -36,12 +36,11 @@ extern int  __init at91_aic5_of_init(struct device_node *node,
 
 
  /* Timer */
-struct sys_timer;
 extern void at91rm9200_ioremap_st(u32 addr);
-extern struct sys_timer at91rm9200_timer;
+extern void at91rm9200_timer_init(void);
 extern void at91sam926x_ioremap_pit(u32 addr);
-extern struct sys_timer at91sam926x_timer;
-extern struct sys_timer at91x40_timer;
+extern void at91sam926x_pit_init(void);
+extern void at91x40_timer_init(void);
 
  /* Clocks */
 #ifdef CONFIG_AT91_PMC_UNIT
diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h
index 97ad68a826f8..5659f7c72120 100644
--- a/arch/arm/mach-at91/include/mach/uncompress.h
+++ b/arch/arm/mach-at91/include/mach/uncompress.h
@@ -196,6 +196,4 @@ static inline void flush(void)
                 barrier();
 }
 
-#define arch_decomp_wdog()
-
 #endif
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index 48705c10a0fe..bf02471d7e7c 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -7,7 +7,6 @@ config ARCH_BCM
         select ARM_GIC
         select CPU_V7
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select GENERIC_TIME
         select GPIO_BCM
         select SPARSE_IRQ
diff --git a/arch/arm/mach-bcm/board_bcm.c b/arch/arm/mach-bcm/board_bcm.c
index 3a62f1b1cabc..f0f9abafad29 100644
--- a/arch/arm/mach-bcm/board_bcm.c
+++ b/arch/arm/mach-bcm/board_bcm.c
@@ -11,34 +11,19 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
-
 #include <asm/mach/time.h>
 
-static const struct of_device_id irq_match[] = {
-        {.compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        {}
-};
-
 static void timer_init(void)
 {
 }
 
-static struct sys_timer timer = {
-        .init = timer_init,
-};
-
-static void __init init_irq(void)
-{
-        of_irq_init(irq_match);
-}
 
 static void __init board_init(void)
 {
@@ -49,9 +34,8 @@ static void __init board_init(void)
 static const char * const bcm11351_dt_compat[] = { "bcm,bcm11351", NULL, };
 
 DT_MACHINE_START(BCM11351_DT, "Broadcom Application Processor")
-        .init_irq = init_irq,
-        .timer = &timer,
+        .init_irq = irqchip_init,
+        .init_time = timer_init,
         .init_machine = board_init,
         .dt_compat = bcm11351_dt_compat,
-        .handle_irq = gic_handle_irq,
 MACHINE_END
diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c
index f0d739f4b7a3..d615a61e902c 100644
--- a/arch/arm/mach-bcm2835/bcm2835.c
+++ b/arch/arm/mach-bcm2835/bcm2835.c
@@ -17,8 +17,8 @@
 #include <linux/irqchip/bcm2835.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
-#include <linux/bcm2835_timer.h>
 #include <linux/clk/bcm2835.h>
+#include <linux/clocksource.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -104,7 +104,7 @@ DT_MACHINE_START(BCM2835, "BCM2835")
         .init_irq = bcm2835_init_irq,
         .handle_irq = bcm2835_handle_irq,
         .init_machine = bcm2835_init,
-        .timer = &bcm2835_timer,
+        .init_time = clocksource_of_init,
         .restart = bcm2835_restart,
         .dt_compat = bcm2835_compat
 MACHINE_END
diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h
index cc46dcc72377..bf86dca3bf71 100644
--- a/arch/arm/mach-bcm2835/include/mach/uncompress.h
+++ b/arch/arm/mach-bcm2835/include/mach/uncompress.h
@@ -42,4 +42,3 @@ static inline void flush(void)
 }
 
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-clps711x/board-autcpu12.c b/arch/arm/mach-clps711x/board-autcpu12.c
index 3fbf43f72589..f38584709df7 100644
--- a/arch/arm/mach-clps711x/board-autcpu12.c
+++ b/arch/arm/mach-clps711x/board-autcpu12.c
@@ -170,7 +170,7 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
         .nr_irqs        = CLPS711X_NR_IRQS,
         .map_io         = clps711x_map_io,
         .init_irq       = clps711x_init_irq,
-        .timer          = &clps711x_timer,
+        .init_time      = clps711x_timer_init,
         .init_machine   = autcpu12_init,
         .init_late      = autcpu12_init_late,
         .handle_irq     = clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/board-cdb89712.c b/arch/arm/mach-clps711x/board-cdb89712.c
index 60900ddf97c9..baab7da33c9b 100644
--- a/arch/arm/mach-clps711x/board-cdb89712.c
+++ b/arch/arm/mach-clps711x/board-cdb89712.c
@@ -140,7 +140,7 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
         .nr_irqs        = CLPS711X_NR_IRQS,
         .map_io         = clps711x_map_io,
         .init_irq       = clps711x_init_irq,
-        .timer          = &clps711x_timer,
+        .init_time      = clps711x_timer_init,
         .init_machine   = cdb89712_init,
         .handle_irq     = clps711x_handle_irq,
         .restart        = clps711x_restart,
diff --git a/arch/arm/mach-clps711x/board-clep7312.c b/arch/arm/mach-clps711x/board-clep7312.c
index 0b32a487183b..014aa3c19a03 100644
--- a/arch/arm/mach-clps711x/board-clep7312.c
+++ b/arch/arm/mach-clps711x/board-clep7312.c
@@ -40,7 +40,7 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
         .fixup          = fixup_clep7312,
         .map_io         = clps711x_map_io,
         .init_irq       = clps711x_init_irq,
-        .timer          = &clps711x_timer,
+        .init_time      = clps711x_timer_init,
         .handle_irq     = clps711x_handle_irq,
         .restart        = clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-edb7211.c b/arch/arm/mach-clps711x/board-edb7211.c
index 71aa5cf2c0d3..5f928e9ed2ef 100644
--- a/arch/arm/mach-clps711x/board-edb7211.c
+++ b/arch/arm/mach-clps711x/board-edb7211.c
@@ -173,7 +173,7 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
         .reserve        = edb7211_reserve,
         .map_io         = edb7211_map_io,
         .init_irq       = clps711x_init_irq,
-        .timer          = &clps711x_timer,
+        .init_time      = clps711x_timer_init,
         .init_machine   = edb7211_init,
         .handle_irq     = clps711x_handle_irq,
         .restart        = clps711x_restart,
diff --git a/arch/arm/mach-clps711x/board-fortunet.c b/arch/arm/mach-clps711x/board-fortunet.c
index 7d0125580366..c5675efc8c6a 100644
--- a/arch/arm/mach-clps711x/board-fortunet.c
+++ b/arch/arm/mach-clps711x/board-fortunet.c
@@ -78,7 +78,7 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
         .fixup          = fortunet_fixup,
         .map_io         = clps711x_map_io,
         .init_irq       = clps711x_init_irq,
-        .timer          = &clps711x_timer,
+        .init_time      = clps711x_timer_init,
         .handle_irq     = clps711x_handle_irq,
         .restart        = clps711x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-clps711x/board-p720t.c b/arch/arm/mach-clps711x/board-p720t.c
index 1518fc83babd..8d3ee6771135 100644
--- a/arch/arm/mach-clps711x/board-p720t.c
+++ b/arch/arm/mach-clps711x/board-p720t.c
@@ -224,7 +224,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
         .map_io         = p720t_map_io,
         .init_early     = p720t_init_early,
         .init_irq       = clps711x_init_irq,
-        .timer          = &clps711x_timer,
+        .init_time      = clps711x_timer_init,
         .init_machine   = p720t_init,
         .init_late      = p720t_init_late,
         .handle_irq     = clps711x_handle_irq,
diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c
index e046439573ee..20ff50f3ccf0 100644
--- a/arch/arm/mach-clps711x/common.c
+++ b/arch/arm/mach-clps711x/common.c
@@ -282,7 +282,7 @@ static void add_fixed_clk(struct clk *clk, const char *name, int rate)
         clk_register_clkdev(clk, name, NULL);
 }
 
-static void __init clps711x_timer_init(void)
+void __init clps711x_timer_init(void)
 {
         int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
         u32 tmp;
@@ -345,10 +345,6 @@ static void __init clps711x_timer_init(void)
         setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
 }
 
-struct sys_timer clps711x_timer = {
-        .init           = clps711x_timer_init,
-};
-
 void clps711x_restart(char mode, const char *cmd)
 {
         soft_restart(0);
diff --git a/arch/arm/mach-clps711x/common.h b/arch/arm/mach-clps711x/common.h
index b7c0c75c90c0..f84a7292c70e 100644
--- a/arch/arm/mach-clps711x/common.h
+++ b/arch/arm/mach-clps711x/common.h
@@ -8,10 +8,8 @@
 #define CLPS711X_NR_GPIO        (4 * 8 + 3)
 #define CLPS711X_GPIO(prt, bit) ((prt) * 8 + (bit))
 
-struct sys_timer;
-
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
+extern void clps711x_timer_init(void);
 extern void clps711x_handle_irq(struct pt_regs *regs);
 extern void clps711x_restart(char mode, const char *cmd);
-extern struct sys_timer clps711x_timer;
diff --git a/arch/arm/mach-clps711x/include/mach/uncompress.h b/arch/arm/mach-clps711x/include/mach/uncompress.h
index 7b28d6a47690..5f02d06dc655 100644
--- a/arch/arm/mach-clps711x/include/mach/uncompress.h
+++ b/arch/arm/mach-clps711x/include/mach/uncompress.h
@@ -53,5 +53,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index ae305397003c..a71867e1d8d6 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -28,7 +28,6 @@
 #include <linux/usb/ohci_pdriver.h>
 #include <asm/setup.h>
 #include <asm/mach-types.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -250,8 +249,7 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
         .atag_offset    = 0x100,
         .map_io         = cns3420_map_io,
         .init_irq       = cns3xxx_init_irq,
-        .timer          = &cns3xxx_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = cns3xxx_timer_init,
         .init_machine   = cns3420_init,
         .restart        = cns3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c
index 031805b1428d..e698f26cc0cb 100644
--- a/arch/arm/mach-cns3xxx/core.c
+++ b/arch/arm/mach-cns3xxx/core.c
@@ -12,10 +12,10 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/cns3xxx.h>
 #include "core.h"
@@ -134,7 +134,6 @@ static int cns3xxx_timer_set_next_event(unsigned long evt,
 
 static struct clock_event_device cns3xxx_tmr1_clockevent = {
         .name           = "cns3xxx timer1",
-        .shift          = 8,
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
         .set_mode       = cns3xxx_timer_set_mode,
         .set_next_event = cns3xxx_timer_set_next_event,
@@ -145,15 +144,9 @@ static struct clock_event_device cns3xxx_tmr1_clockevent = {
 static void __init cns3xxx_clockevents_init(unsigned int timer_irq)
 {
         cns3xxx_tmr1_clockevent.irq = timer_irq;
-        cns3xxx_tmr1_clockevent.mult =
-                div_sc((cns3xxx_cpu_clock() >> 3) * 1000000, NSEC_PER_SEC,
-                       cns3xxx_tmr1_clockevent.shift);
-        cns3xxx_tmr1_clockevent.max_delta_ns =
-                clockevent_delta2ns(0xffffffff, &cns3xxx_tmr1_clockevent);
-        cns3xxx_tmr1_clockevent.min_delta_ns =
-                clockevent_delta2ns(0xf, &cns3xxx_tmr1_clockevent);
-
-        clockevents_register_device(&cns3xxx_tmr1_clockevent);
+        clockevents_config_and_register(&cns3xxx_tmr1_clockevent,
+                                        (cns3xxx_cpu_clock() >> 3) * 1000000,
+                                        0xf, 0xffffffff);
 }
 
 /*
@@ -235,17 +228,13 @@ static void __init __cns3xxx_timer_init(unsigned int timer_irq)
         cns3xxx_clockevents_init(timer_irq);
 }
 
-static void __init cns3xxx_timer_init(void)
+void __init cns3xxx_timer_init(void)
 {
         cns3xxx_tmr1 = IOMEM(CNS3XXX_TIMER1_2_3_BASE_VIRT);
 
         __cns3xxx_timer_init(IRQ_CNS3XXX_TIMER0);
 }
 
-struct sys_timer cns3xxx_timer = {
-        .init = cns3xxx_timer_init,
-};
-
 #ifdef CONFIG_CACHE_L2X0
 
 void __init cns3xxx_l2x0_init(void)
diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h
index 4894b8c17151..b23b17b4da10 100644
--- a/arch/arm/mach-cns3xxx/core.h
+++ b/arch/arm/mach-cns3xxx/core.h
@@ -11,7 +11,7 @@
 #ifndef __CNS3XXX_CORE_H
 #define __CNS3XXX_CORE_H
 
-extern struct sys_timer cns3xxx_timer;
+extern void cns3xxx_timer_init(void);
 
 #ifdef CONFIG_CACHE_L2X0
 void __init cns3xxx_l2x0_init(void);
diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
index a91b6058ab4f..7a030b99df84 100644
--- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h
+++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h
@@ -51,4 +51,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 95b5e102ceb1..e3742716cbaa 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -679,7 +679,7 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
         .atag_offset    = 0x100,
         .map_io         = da830_evm_map_io,
         .init_irq       = cp_intc_init,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine   = da830_evm_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0299915575a8..3b3356097bb0 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1599,7 +1599,7 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
         .atag_offset    = 0x100,
         .map_io         = da850_evm_map_io,
         .init_irq       = cp_intc_init,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine   = da850_evm_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index cdf8d0746e79..147b8e1a4407 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -355,7 +355,7 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
         .atag_offset  = 0x100,
         .map_io       = dm355_evm_map_io,
         .init_irq     = davinci_irq_init,
-        .timer        = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine = dm355_evm_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index d41954507fc2..dff4ddc5ef81 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -274,7 +274,7 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
         .atag_offset  = 0x100,
         .map_io       = dm355_leopard_map_io,
         .init_irq     = davinci_irq_init,
-        .timer        = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine = dm355_leopard_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 5d49c75388ca..c2d4958a0cb6 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -616,7 +616,7 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
         .atag_offset    = 0x100,
         .map_io         = dm365_evm_map_io,
         .init_irq       = davinci_irq_init,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine   = dm365_evm_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index f5e018de7fa5..e4a16f98e6a2 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -825,7 +825,7 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
         .atag_offset  = 0x100,
         .map_io       = davinci_evm_map_io,
         .init_irq     = davinci_irq_init,
-        .timer        = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine = davinci_evm_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 6e2f1631df5b..de7adff324dc 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -818,7 +818,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
         .atag_offset  = 0x100,
         .map_io       = davinci_map_io,
         .init_irq     = davinci_irq_init,
-        .timer        = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine = evm_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
@@ -829,7 +829,7 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
         .atag_offset  = 0x100,
         .map_io       = davinci_map_io,
         .init_irq     = davinci_irq_init,
-        .timer        = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine = evm_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 43e4a0d663fa..b0df578bf744 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -570,7 +570,7 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
         .atag_offset    = 0x100,
         .map_io         = mityomapl138_map_io,
         .init_irq       = cp_intc_init,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine   = mityomapl138_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 3e3e3afebf88..1c98107527fa 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -237,7 +237,7 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
         .atag_offset    = 0x100,
         .map_io          = davinci_ntosd2_map_io,
         .init_irq       = davinci_irq_init,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine = davinci_ntosd2_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index dc1208e9e664..deb3922612b9 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -341,7 +341,7 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
         .atag_offset    = 0x100,
         .map_io         = omapl138_hawk_map_io,
         .init_irq       = cp_intc_init,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine   = omapl138_hawk_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 6957787fa7f3..739be7e738fe 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -155,7 +155,7 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
         .atag_offset  = 0x100,
         .map_io       = davinci_sffsdr_map_io,
         .init_irq     = davinci_irq_init,
-        .timer        = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine = davinci_sffsdr_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index be3099733b1f..4f416023d4e2 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -280,7 +280,7 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
         .atag_offset    = 0x100,
         .map_io         = tnetv107x_init,
         .init_irq       = cp_intc_init,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine   = tnetv107x_evm_board_init,
         .init_late      = davinci_init_late,
         .dma_zone_size  = SZ_128M,
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 37c27af18fa0..9a7c76efc8f8 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -56,7 +56,7 @@ static const char *da850_boards_compat[] __initdata = {
 DT_MACHINE_START(DA850_DT, "Generic DA850/OMAP-L138/AM18x")
         .map_io         = da850_init,
         .init_irq       = da8xx_init_irq,
-        .timer          = &davinci_timer,
+        .init_time      = davinci_timer_init,
         .init_machine   = da850_init_machine,
         .dt_compat      = da850_boards_compat,
         .init_late      = davinci_init_late,
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 046c7238a3d6..b124b77c90c5 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -15,9 +15,7 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 
-struct sys_timer;
-
-extern struct sys_timer davinci_timer;
+extern void davinci_timer_init(void);
 
 extern void davinci_irq_init(void);
 extern void __iomem *davinci_intc_base;
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 3a0ff905a69b..f49c2916aa3a 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -101,4 +101,3 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 }
 
 #define arch_decomp_setup()     __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 9847938785ca..bad361ec1666 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -337,7 +337,7 @@ static struct clock_event_device clockevent_davinci = {
 };
 
 
-static void __init davinci_timer_init(void)
+void __init davinci_timer_init(void)
 {
         struct clk *timer_clk;
         struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -410,11 +410,6 @@ static void __init davinci_timer_init(void)
                 timer32_config(&timers[i]);
 }
 
-struct sys_timer davinci_timer = {
-        .init   = davinci_timer_init,
-};
-
-
 /* reset board using watchdog timer */
 void davinci_watchdog_reset(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 792b4e2e24f1..0dc39cf30fdd 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -92,6 +92,6 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
         .map_io         = dove_map_io,
         .init_early     = dove_init_early,
         .init_irq       = dove_init_irq,
-        .timer          = &dove_timer,
+        .init_time      = dove_timer_init,
         .restart        = dove_restart,
 MACHINE_END
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 89f4f993cd03..ea84c535a110 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -8,35 +8,24 @@
  * warranty of any kind, whether express or implied.
  */
 
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
 #include <linux/clk-provider.h>
 #include <linux/clk/mvebu.h>
-#include <linux/ata_platform.h>
-#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_platform.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-#include <asm/timex.h>
+#include <linux/platform_data/dma-mv_xor.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <linux/platform_device.h>
 #include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/mach/pci.h>
-#include <mach/dove.h>
-#include <mach/pm.h>
 #include <mach/bridge-regs.h>
-#include <asm/mach/arch.h>
-#include <linux/irq.h>
-#include <plat/time.h>
-#include <linux/platform_data/usb-ehci-orion.h>
-#include <linux/platform_data/dma-mv_xor.h>
-#include <plat/irq.h>
+#include <mach/pm.h>
 #include <plat/common.h>
-#include <plat/addr-map.h>
+#include <plat/irq.h>
+#include <plat/time.h>
 #include "common.h"
 
 /*****************************************************************************
@@ -242,17 +231,13 @@ static int __init dove_find_tclk(void)
         return 166666667;
 }
 
-static void __init dove_timer_init(void)
+void __init dove_timer_init(void)
 {
         dove_tclk = dove_find_tclk();
         orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
                         IRQ_DOVE_BRIDGE, dove_tclk);
 }
 
-struct sys_timer dove_timer = {
-        .init = dove_timer_init,
-};
-
 /*****************************************************************************
  * Cryptographic Engines and Security Accelerator (CESA)
  ****************************************************************************/
@@ -454,7 +439,7 @@ DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)")
         .map_io         = dove_map_io,
         .init_early     = dove_init_early,
         .init_irq       = orion_dt_init_irq,
-        .timer          = &dove_timer,
+        .init_time      = dove_timer_init,
         .init_machine   = dove_dt_init,
         .restart        = dove_restart,
         .dt_compat      = dove_dt_board_compat,
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
index 1a233404b735..ee59fba4c6d1 100644
--- a/arch/arm/mach-dove/common.h
+++ b/arch/arm/mach-dove/common.h
@@ -14,7 +14,7 @@
 struct mv643xx_eth_platform_data;
 struct mv_sata_platform_data;
 
-extern struct sys_timer dove_timer;
+extern void dove_timer_init(void);
 
 /*
  * Basic Dove init functions used early by machine-setup.
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index bc2867f11346..76e26f949c27 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -98,6 +98,6 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
         .map_io         = dove_map_io,
         .init_early     = dove_init_early,
         .init_irq       = dove_init_irq,
-        .timer          = &dove_timer,
+        .init_time      = dove_timer_init,
         .restart        = dove_restart,
 MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
index 2c5cdd7a3eed..5c8ae9b9d39a 100644
--- a/arch/arm/mach-dove/include/mach/uncompress.h
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -34,4 +34,3 @@ static void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index f0fe6b5350e2..b13cc74114db 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -158,7 +158,7 @@ static void __init ebsa110_init_early(void)
  * interrupt, then the PIT counter will roll over (ie, be negative).
  * This actually works out to be convenient.
  */
-static unsigned long ebsa110_gettimeoffset(void)
+static u32 ebsa110_gettimeoffset(void)
 {
         unsigned long offset, count;
 
@@ -181,7 +181,7 @@ static unsigned long ebsa110_gettimeoffset(void)
          */
         offset = offset * (1000000 / HZ) / COUNT;
 
-        return offset;
+        return offset * 1000;
 }
 
 static irqreturn_t
@@ -213,8 +213,10 @@ static struct irqaction ebsa110_timer_irq = {
 /*
  * Set up timer interrupt.
  */
-static void __init ebsa110_timer_init(void)
+void __init ebsa110_timer_init(void)
 {
+        arch_gettimeoffset = ebsa110_gettimeoffset;
+
         /*
          * Timer 1, mode 2, LSB/MSB
          */
@@ -225,11 +227,6 @@ static void __init ebsa110_timer_init(void)
         setup_irq(IRQ_EBSA110_TIMER0, &ebsa110_timer_irq);
 }
 
-static struct sys_timer ebsa110_timer = {
-        .init           = ebsa110_timer_init,
-        .offset         = ebsa110_gettimeoffset,
-};
-
 static struct plat_serial8250_port serial_platform_data[] = {
         {
                 .iobase         = 0x3f8,
@@ -328,6 +325,6 @@ MACHINE_START(EBSA110, "EBSA110")
         .map_io         = ebsa110_map_io,
         .init_early     = ebsa110_init_early,
         .init_irq       = ebsa110_init_irq,
-        .timer          = &ebsa110_timer,
+        .init_time      = ebsa110_timer_init,
         .restart        = ebsa110_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ebsa110/include/mach/uncompress.h b/arch/arm/mach-ebsa110/include/mach/uncompress.h
index 32041509fbf8..ab64bea69c72 100644
--- a/arch/arm/mach-ebsa110/include/mach/uncompress.h
+++ b/arch/arm/mach-ebsa110/include/mach/uncompress.h
@@ -42,4 +42,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 41383bf03d4b..bda6c3a5c923 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -17,7 +17,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -39,8 +38,7 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = adssphere_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index e85bf17f2d2a..c49ed3dc1aea 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -34,6 +34,7 @@
 #include <linux/i2c-gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/export.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <mach/hardware.h>
 #include <linux/platform_data/video-ep93xx.h>
@@ -44,8 +45,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
-#include <asm/hardware/vic.h>
-
 #include "soc.h"
 
 /*************************************************************************
@@ -140,11 +139,29 @@ static struct irqaction ep93xx_timer_irq = {
         .handler        = ep93xx_timer_interrupt,
 };
 
-static void __init ep93xx_timer_init(void)
+static u32 ep93xx_gettimeoffset(void)
+{
+        int offset;
+
+        offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
+
+        /*
+         * Timer 4 is based on a 983.04 kHz reference clock,
+         * so dividing by 983040 gives the fraction of a second,
+         * so dividing by 0.983040 converts to uS.
+         * Refactor the calculation to avoid overflow.
+         * Finally, multiply by 1000 to give nS.
+         */
+        return (offset + (53 * offset / 3072)) * 1000;
+}
+
+void __init ep93xx_timer_init(void)
 {
         u32 tmode = EP93XX_TIMER123_CONTROL_MODE |
                     EP93XX_TIMER123_CONTROL_CLKSEL;
 
+        arch_gettimeoffset = ep93xx_gettimeoffset;
+
         /* Enable periodic HZ timer.  */
         __raw_writel(tmode, EP93XX_TIMER1_CONTROL);
         __raw_writel(TIMER1_RELOAD, EP93XX_TIMER1_LOAD);
@@ -158,21 +175,6 @@ static void __init ep93xx_timer_init(void)
         setup_irq(IRQ_EP93XX_TIMER1, &ep93xx_timer_irq);
 }
 
-static unsigned long ep93xx_gettimeoffset(void)
-{
-        int offset;
-
-        offset = __raw_readl(EP93XX_TIMER4_VALUE_LOW) - last_jiffy_time;
-
-        /* Calculate (1000000 / 983040) * offset.  */
-        return offset + (53 * offset / 3072);
-}
-
-struct sys_timer ep93xx_timer = {
-        .init           = ep93xx_timer_init,
-        .offset         = ep93xx_gettimeoffset,
-};
-
 
 /*************************************************************************
  * EP93xx IRQ handling
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index b8f53d57a299..27b14ae92c7e 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -39,7 +39,6 @@
 #include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -276,8 +275,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -290,8 +288,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -304,8 +301,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -318,8 +314,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -332,8 +327,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -346,8 +340,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -360,8 +353,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -374,8 +366,7 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = edb93xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 7fd705b5efe4..0cca5b183309 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -17,7 +17,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -39,8 +38,7 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = gesbc9312_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 33a5122c6dc8..a14e1b37beff 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -53,7 +53,7 @@ int ep93xx_ide_acquire_gpio(struct platform_device *pdev);
 void ep93xx_ide_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
-extern struct sys_timer ep93xx_timer;
+extern void ep93xx_timer_init(void);
 
 void ep93xx_restart(char, const char *);
 void ep93xx_init_late(void);
diff --git a/arch/arm/mach-ep93xx/include/mach/uncompress.h b/arch/arm/mach-ep93xx/include/mach/uncompress.h
index d64274fc5760..d2afb4dd82ab 100644
--- a/arch/arm/mach-ep93xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ep93xx/include/mach/uncompress.h
@@ -86,5 +86,3 @@ static void arch_decomp_setup(void)
 {
         ethernet_reset();
 }
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 3d7cdab725b2..373583c29825 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -18,7 +18,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -82,8 +81,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = micro9_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -96,8 +94,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = micro9_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -110,8 +107,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = micro9_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
@@ -124,8 +120,7 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = micro9_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 0eb3f17a6fa2..36f22c1a31fe 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -25,7 +25,6 @@
 #include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -83,8 +82,7 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = simone_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 50043eef1cf2..aa86f86638dd 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -31,7 +31,6 @@
 #include <linux/platform_data/video-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -176,8 +175,7 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
         .atag_offset    = 0x100,
         .map_io         = ep93xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = snappercl15_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index 3c4c233391dc..61f4b5dc4d7d 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -22,7 +22,6 @@
 
 #include <mach/hardware.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -246,8 +245,7 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
         .atag_offset    = 0x100,
         .map_io         = ts72xx_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = ts72xx_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index ba92e25e3016..605956fd07a2 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -34,7 +34,6 @@
 #include <linux/platform_data/spi-ep93xx.h>
 #include <mach/gpio-ep93xx.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
@@ -364,8 +363,7 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
         .atag_offset    = 0x100,
         .map_io         = vision_map_io,
         .init_irq       = ep93xx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &ep93xx_timer,
+        .init_time      = ep93xx_timer_init,
         .init_machine   = vision_init_machine,
         .init_late      = ep93xx_init_late,
         .restart        = ep93xx_restart,
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 0c7e3ad7ba93..d63d399c7bae 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
@@ -22,12 +23,13 @@
 #include <linux/of_irq.h>
 #include <linux/export.h>
 #include <linux/irqdomain.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/proc-fns.h>
 #include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/cacheflush.h>
@@ -35,7 +37,6 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 #include <mach/regs-gpio.h>
-#include <mach/pmu.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
@@ -440,220 +441,6 @@ static void __init exynos5_init_clocks(int xtal)
 #endif
 }
 
-#define COMBINER_ENABLE_SET     0x0
-#define COMBINER_ENABLE_CLEAR   0x4
-#define COMBINER_INT_STATUS     0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
-        unsigned int irq_offset;
-        unsigned int irq_mask;
-        void __iomem *base;
-};
-
-static struct irq_domain *combiner_irq_domain;
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
-        struct combiner_chip_data *combiner_data =
-                irq_data_get_irq_chip_data(data);
-
-        return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
-        u32 mask = 1 << (data->hwirq % 32);
-
-        __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
-        u32 mask = 1 << (data->hwirq % 32);
-
-        __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-        struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
-        struct irq_chip *chip = irq_get_chip(irq);
-        unsigned int cascade_irq, combiner_irq;
-        unsigned long status;
-
-        chained_irq_enter(chip, desc);
-
-        spin_lock(&irq_controller_lock);
-        status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
-        spin_unlock(&irq_controller_lock);
-        status &= chip_data->irq_mask;
-
-        if (status == 0)
-                goto out;
-
-        combiner_irq = __ffs(status);
-
-        cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
-        if (unlikely(cascade_irq >= NR_IRQS))
-                do_bad_IRQ(cascade_irq, desc);
-        else
-                generic_handle_irq(cascade_irq);
-
- out:
-        chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
-        .name           = "COMBINER",
-        .irq_mask       = combiner_mask_irq,
-        .irq_unmask     = combiner_unmask_irq,
-};
-
-static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
-        unsigned int max_nr;
-
-        if (soc_is_exynos5250())
-                max_nr = EXYNOS5_MAX_COMBINER_NR;
-        else
-                max_nr = EXYNOS4_MAX_COMBINER_NR;
-
-        if (combiner_nr >= max_nr)
-                BUG();
-        if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
-                BUG();
-        irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-static void __init combiner_init_one(unsigned int combiner_nr,
-                                     void __iomem *base)
-{
-        combiner_data[combiner_nr].base = base;
-        combiner_data[combiner_nr].irq_offset = irq_find_mapping(
-                combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
-        combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
-        /* Disable all interrupts */
-        __raw_writel(combiner_data[combiner_nr].irq_mask,
-                     base + COMBINER_ENABLE_CLEAR);
-}
-
-#ifdef CONFIG_OF
-static int combiner_irq_domain_xlate(struct irq_domain *d,
-                                     struct device_node *controller,
-                                     const u32 *intspec, unsigned int intsize,
-                                     unsigned long *out_hwirq,
-                                     unsigned int *out_type)
-{
-        if (d->of_node != controller)
-                return -EINVAL;
-
-        if (intsize < 2)
-                return -EINVAL;
-
-        *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
-        *out_type = 0;
-
-        return 0;
-}
-#else
-static int combiner_irq_domain_xlate(struct irq_domain *d,
-                                     struct device_node *controller,
-                                     const u32 *intspec, unsigned int intsize,
-                                     unsigned long *out_hwirq,
-                                     unsigned int *out_type)
-{
-        return -EINVAL;
-}
-#endif
-
-static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
-                                   irq_hw_number_t hw)
-{
-        irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
-        irq_set_chip_data(irq, &combiner_data[hw >> 3]);
-        set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-
-        return 0;
-}
-
-static struct irq_domain_ops combiner_irq_domain_ops = {
-        .xlate  = combiner_irq_domain_xlate,
-        .map    = combiner_irq_domain_map,
-};
-
-static void __init combiner_init(void __iomem *combiner_base,
-                                 struct device_node *np)
-{
-        int i, irq, irq_base;
-        unsigned int max_nr, nr_irq;
-
-        if (np) {
-                if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
-                        pr_warning("%s: number of combiners not specified, "
-                                "setting default as %d.\n",
-                                __func__, EXYNOS4_MAX_COMBINER_NR);
-                        max_nr = EXYNOS4_MAX_COMBINER_NR;
-                }
-        } else {
-                max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
-                                                EXYNOS4_MAX_COMBINER_NR;
-        }
-        nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
-
-        irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
-        if (IS_ERR_VALUE(irq_base)) {
-                irq_base = COMBINER_IRQ(0, 0);
-                pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
-        }
-
-        combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
-                                &combiner_irq_domain_ops, &combiner_data);
-        if (WARN_ON(!combiner_irq_domain)) {
-                pr_warning("%s: irq domain init failed\n", __func__);
-                return;
-        }
-
-        for (i = 0; i < max_nr; i++) {
-                combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
-                irq = IRQ_SPI(i);
-#ifdef CONFIG_OF
-                if (np)
-                        irq = irq_of_parse_and_map(np, i);
-#endif
-                combiner_cascade_irq(i, irq);
-        }
-}
-
-#ifdef CONFIG_OF
-static int __init combiner_of_init(struct device_node *np,
-                                   struct device_node *parent)
-{
-        void __iomem *combiner_base;
-
-        combiner_base = of_iomap(np, 0);
-        if (!combiner_base) {
-                pr_err("%s: failed to map combiner registers\n", __func__);
-                return -ENXIO;
-        }
-
-        combiner_init(combiner_base, np);
-
-        return 0;
-}
-
-static const struct of_device_id exynos_dt_irq_match[] = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
-        { .compatible = "samsung,exynos4210-combiner",
-                        .data = combiner_of_init, },
-        {},
-};
-#endif
-
 void __init exynos4_init_irq(void)
 {
         unsigned int gic_bank_offset;
@@ -664,7 +451,7 @@ void __init exynos4_init_irq(void)
                 gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
 #ifdef CONFIG_OF
         else
-                of_irq_init(exynos_dt_irq_match);
+                irqchip_init();
 #endif
 
         if (!of_have_populated_dt())
@@ -681,7 +468,7 @@ void __init exynos4_init_irq(void)
 void __init exynos5_init_irq(void)
 {
 #ifdef CONFIG_OF
-        of_irq_init(exynos_dt_irq_match);
+        irqchip_init();
 #endif
         /*
          * The parameters of s5p_init_irq() are for VIC init.
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 04744f9c120f..9339bb8954be 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,7 +12,7 @@
 #ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
 #define __ARCH_ARM_MACH_EXYNOS_COMMON_H
 
-extern struct sys_timer exynos4_timer;
+extern void exynos4_timer_init(void);
 
 struct map_desc;
 void exynos_init_io(struct map_desc *mach_desc, int size);
@@ -60,8 +60,31 @@ void exynos4212_register_clocks(void);
 #define exynos4212_register_clocks()
 #endif
 
+struct device_node;
+void combiner_init(void __iomem *combiner_base, struct device_node *np);
+
 extern struct smp_operations exynos_smp_ops;
 
 extern void exynos_cpu_die(unsigned int cpu);
 
+/* PMU(Power Management Unit) support */
+
+#define PMU_TABLE_END   NULL
+
+enum sys_powerdown {
+        SYS_AFTR,
+        SYS_LPA,
+        SYS_SLEEP,
+        NUM_SYS_POWERDOWN,
+};
+
+extern unsigned long l2x0_regs_phys;
+struct exynos_pmu_conf {
+        void __iomem *reg;
+        unsigned int val[NUM_SYS_POWERDOWN];
+};
+
+extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+extern void s3c_cpu_resume(void);
+
 #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
diff --git a/arch/arm/mach-exynos/cpuidle.c b/arch/arm/mach-exynos/cpuidle.c
index 050924152776..fcfe0251aa3e 100644
--- a/arch/arm/mach-exynos/cpuidle.c
+++ b/arch/arm/mach-exynos/cpuidle.c
@@ -23,10 +23,11 @@
 #include <asm/cpuidle.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
-#include <mach/pmu.h>
 
 #include <plat/cpu.h>
 
+#include "common.h"
+
 #define REG_DIRECTGO_ADDR       (samsung_rev() == EXYNOS4210_REV_1_1 ? \
                         S5P_INFORM7 : (samsung_rev() == EXYNOS4210_REV_1_0 ? \
                         (S5P_VA_SYSRAM + 0x24) : S5P_INFORM0))
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index 9d1a60951d7b..c662c89794b2 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -21,7 +21,8 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define EXYNOS4_AUDSS_INT_MEM   (0x03000000)
 
 static int exynos4_cfg_i2s(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-exynos/include/mach/pmu.h b/arch/arm/mach-exynos/include/mach/pmu.h
deleted file mode 100644
index 7c27c2d4bf44..000000000000
--- a/arch/arm/mach-exynos/include/mach/pmu.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/pmu.h
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com/
- *
- * EXYNOS4210 - PMU(Power Management Unit) support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_PMU_H
-#define __ASM_ARCH_PMU_H __FILE__
-
-#define PMU_TABLE_END   NULL
-
-enum sys_powerdown {
-        SYS_AFTR,
-        SYS_LPA,
-        SYS_SLEEP,
-        NUM_SYS_POWERDOWN,
-};
-
-extern unsigned long l2x0_regs_phys;
-struct exynos_pmu_conf {
-        void __iomem *reg;
-        unsigned int val[NUM_SYS_POWERDOWN];
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
-extern void s3c_cpu_resume(void);
-
-#endif /* __ASM_ARCH_PMU_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-audss.h b/arch/arm/mach-exynos/include/mach/regs-audss.h
deleted file mode 100644
index ca5a8b64218a..000000000000
--- a/arch/arm/mach-exynos/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-exynos4/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- *              http://www.samsung.com
- *
- * Exynos4 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define EXYNOS4_AUDSS_INT_MEM   (0x03000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-irq.h b/arch/arm/mach-exynos/include/mach/regs-irq.h
index 9c7b4bfd546f..f2b50506b9f6 100644
--- a/arch/arm/mach-exynos/include/mach/regs-irq.h
+++ b/arch/arm/mach-exynos/include/mach/regs-irq.h
@@ -13,7 +13,7 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/map.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
index b938f9fc1dd1..685f29173afa 100644
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ b/arch/arm/mach-exynos/mach-armlex4210.c
@@ -16,7 +16,6 @@
 #include <linux/smsc911x.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/cpu.h>
@@ -201,9 +200,8 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = armlex4210_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = armlex4210_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 92757ff817ae..112d10e53d20 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -15,7 +15,6 @@
 #include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <mach/map.h>
 
 #include <plat/cpu.h>
@@ -107,10 +106,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = exynos4_dt_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = exynos4_dt_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .dt_compat      = exynos4_dt_compat,
         .restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index ea9e3020972d..973a06637572 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -16,7 +16,6 @@
 #include <linux/io.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <mach/map.h>
 #include <mach/regs-pmu.h>
 
@@ -185,10 +184,9 @@ DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
         .init_irq       = exynos5_init_irq,
         .smp            = smp_ops(exynos_smp_ops),
         .map_io         = exynos5_dt_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = exynos5_dt_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .dt_compat      = exynos5_dt_compat,
         .restart        = exynos5_restart,
         .reserve        = exynos5_reserve,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index 27d4ed8b116e..b8b3fbf0bae7 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -39,7 +39,6 @@
 #include <media/v4l2-mediabus.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <plat/adc.h>
@@ -1379,10 +1378,9 @@ MACHINE_START(NURI, "NURI")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = nuri_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = nuri_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .reserve        = &nuri_reserve,
         .restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5e34b9c16196..579d2d171daa 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -29,7 +29,6 @@
 #include <linux/platform_data/usb-exynos.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -814,10 +813,9 @@ MACHINE_START(ORIGEN, "ORIGEN")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = origen_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = origen_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .reserve        = &origen_reserve,
         .restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
index ae6da40c2aa9..fe6149624b84 100644
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ b/arch/arm/mach-exynos/mach-smdk4x12.c
@@ -25,7 +25,6 @@
 #include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/samsung_fimd.h>
@@ -376,9 +375,8 @@ MACHINE_START(SMDK4212, "SMDK4212")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = smdk4x12_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = smdk4x12_machine_init,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .restart        = exynos4_restart,
         .reserve        = &smdk4x12_reserve,
 MACHINE_END
@@ -390,10 +388,9 @@ MACHINE_START(SMDK4412, "SMDK4412")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = smdk4x12_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = smdk4x12_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .restart        = exynos4_restart,
         .reserve        = &smdk4x12_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 35548e3c097d..d71672922b19 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -26,7 +26,6 @@
 #include <linux/platform_data/usb-exynos.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/platform_lcd.h>
@@ -423,9 +422,8 @@ MACHINE_START(SMDKV310, "SMDKV310")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = smdkv310_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = smdkv310_machine_init,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .reserve        = &smdkv310_reserve,
         .restart        = exynos4_restart,
 MACHINE_END
@@ -436,10 +434,9 @@ MACHINE_START(SMDKC210, "SMDKC210")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = smdkv310_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = smdkv310_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &exynos4_timer,
+        .init_time      = exynos4_timer_init,
         .reserve        = &smdkv310_reserve,
         .restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 9e3340f18950..c9d33a43103e 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -29,7 +29,6 @@
 #include <drm/exynos_drm.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 
 #include <video/samsung_fimd.h>
@@ -1151,10 +1150,9 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
         .smp            = smp_ops(exynos_smp_ops),
         .init_irq       = exynos4_init_irq,
         .map_io         = universal_map_io,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = universal_machine_init,
         .init_late      = exynos_init_late,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .reserve        = &universal_reserve,
         .restart        = exynos4_restart,
 MACHINE_END
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 57668eb68e75..c9d6650f9b5d 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -22,7 +22,6 @@
 #include <linux/of.h>
 
 #include <asm/arch_timer.h>
-#include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 
 #include <plat/cpu.h>
@@ -255,13 +254,9 @@ static struct irqaction mct_comp_event_irq = {
 
 static void exynos4_clockevent_init(void)
 {
-        clockevents_calc_mult_shift(&mct_comp_device, clk_rate, 5);
-        mct_comp_device.max_delta_ns =
-                clockevent_delta2ns(0xffffffff, &mct_comp_device);
-        mct_comp_device.min_delta_ns =
-                clockevent_delta2ns(0xf, &mct_comp_device);
         mct_comp_device.cpumask = cpumask_of(0);
-        clockevents_register_device(&mct_comp_device);
+        clockevents_config_and_register(&mct_comp_device, clk_rate,
+                                        0xf, 0xffffffff);
 
         if (soc_is_exynos5250())
                 setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
@@ -404,14 +399,8 @@ static int __cpuinit exynos4_local_timer_setup(struct clock_event_device *evt)
         evt->set_mode = exynos4_tick_set_mode;
         evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
         evt->rating = 450;
-
-        clockevents_calc_mult_shift(evt, clk_rate / (TICK_BASE_CNT + 1), 5);
-        evt->max_delta_ns =
-                clockevent_delta2ns(0x7fffffff, evt);
-        evt->min_delta_ns =
-                clockevent_delta2ns(0xf, evt);
-
-        clockevents_register_device(evt);
+        clockevents_config_and_register(evt, clk_rate / (TICK_BASE_CNT + 1),
+                                        0xf, 0x7fffffff);
 
         exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 
@@ -478,7 +467,7 @@ static void __init exynos4_timer_resources(void)
 #endif /* CONFIG_LOCAL_TIMERS */
 }
 
-static void __init exynos_timer_init(void)
+void __init exynos4_timer_init(void)
 {
         if (soc_is_exynos5440()) {
                 arch_timer_of_register();
@@ -494,7 +483,3 @@ static void __init exynos_timer_init(void)
         exynos4_clocksource_init();
         exynos4_clockevent_init();
 }
-
-struct sys_timer exynos4_timer = {
-        .init           = exynos_timer_init,
-};
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index c5c840e947b8..60f7c5be057d 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -20,9 +20,9 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 
@@ -149,7 +149,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct
 
                 __raw_writel(virt_to_phys(exynos4_secondary_startup),
                                                         cpu_boot_reg(phys_cpu));
-                gic_raise_softirq(cpumask_of(cpu), 0);
+                arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
                 if (pen_release == -1)
                         break;
@@ -190,8 +190,6 @@ static void __init exynos_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init exynos_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index 5106ab83e593..e3faaa812016 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -34,7 +34,8 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
 #include <mach/pm-core.h>
-#include <mach/pmu.h>
+
+#include "common.h"
 
 static struct sleep_save exynos4_set_clksrc[] = {
         { .reg = EXYNOS4_CLKSRC_MASK_TOP                , .val = 0x00000001, },
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index 3a48c852be6c..daebc1abc966 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -14,7 +14,8 @@
 #include <linux/bug.h>
 
 #include <mach/regs-clock.h>
-#include <mach/pmu.h>
+
+#include "common.h"
 
 static struct exynos_pmu_conf *exynos_pmu_config;
 
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 25b453601acc..6987a09ec219 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -90,6 +90,6 @@ MACHINE_START(CATS, "Chalice-CATS")
         .fixup          = fixup_cats,
         .map_io         = footbridge_map_io,
         .init_irq       = footbridge_init_irq,
-        .timer          = &isa_timer,
+        .init_time      = isa_timer_init,
         .restart        = footbridge_restart,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/common.h b/arch/arm/mach-footbridge/common.h
index c9767b892cb2..a846e50a07b8 100644
--- a/arch/arm/mach-footbridge/common.h
+++ b/arch/arm/mach-footbridge/common.h
@@ -1,6 +1,6 @@
 
-extern struct sys_timer footbridge_timer;
-extern struct sys_timer isa_timer;
+extern void footbridge_timer_init(void);
+extern void isa_timer_init(void);
 
 extern void isa_rtc_init(void);
 
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index 3b54196447c7..9ee78f7b4990 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -93,7 +93,7 @@ static struct irqaction footbridge_timer_irq = {
 /*
  * Set up timer interrupt.
  */
-static void __init footbridge_timer_init(void)
+void __init footbridge_timer_init(void)
 {
         struct clock_event_device *ce = &ckevt_dc21285;
 
@@ -101,14 +101,6 @@ static void __init footbridge_timer_init(void)
 
         setup_irq(ce->irq, &footbridge_timer_irq);
 
-        clockevents_calc_mult_shift(ce, mem_fclk_21285, 5);
-        ce->max_delta_ns = clockevent_delta2ns(0xffffff, ce);
-        ce->min_delta_ns = clockevent_delta2ns(0x000004, ce);
         ce->cpumask = cpumask_of(smp_processor_id());
-
-        clockevents_register_device(ce);
+        clockevents_config_and_register(ce, mem_fclk_21285, 0x4, 0xffffff);
 }
-
-struct sys_timer footbridge_timer = {
-        .init           = footbridge_timer_init,
-};
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index b09551ef89ca..b08243500e2e 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -101,7 +101,7 @@ MACHINE_START(EBSA285, "EBSA285")
         .video_end      = 0x000bffff,
         .map_io         = footbridge_map_io,
         .init_irq       = footbridge_init_irq,
-        .timer          = &footbridge_timer,
+        .init_time      = footbridge_timer_init,
         .restart        = footbridge_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-footbridge/include/mach/uncompress.h b/arch/arm/mach-footbridge/include/mach/uncompress.h
index 5dfa44287346..a69398c05a52 100644
--- a/arch/arm/mach-footbridge/include/mach/uncompress.h
+++ b/arch/arm/mach-footbridge/include/mach/uncompress.h
@@ -35,4 +35,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index c40bb415f4b5..d9301dd56354 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -31,14 +31,10 @@ static struct irqaction pit_timer_irq = {
         .dev_id         = &i8253_clockevent,
 };
 
-static void __init isa_timer_init(void)
+void __init isa_timer_init(void)
 {
         clocksource_i8253_init();
 
         setup_irq(i8253_clockevent.irq, &pit_timer_irq);
         clockevent_i8253_init(false);
 }
-
-struct sys_timer isa_timer = {
-        .init           = isa_timer_init,
-};
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index d2d14339c6c4..90ea23fdce4c 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -766,6 +766,6 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder")
         .fixup          = fixup_netwinder,
         .map_io         = footbridge_map_io,
         .init_irq       = footbridge_init_irq,
-        .timer          = &isa_timer,
+        .init_time      = isa_timer_init,
         .restart        = netwinder_restart,
 MACHINE_END
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index e1e9990fa957..7bdeabdcd4d8 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -18,7 +18,7 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
         .atag_offset    = 0x100,
         .map_io         = footbridge_map_io,
         .init_irq       = footbridge_init_irq,
-        .timer          = &footbridge_timer,
+        .init_time      = footbridge_timer_init,
         .restart        = footbridge_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 5927d3c253aa..08bd650c42f3 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -31,10 +31,6 @@
 
 #include "common.h"
 
-static struct sys_timer ib4220b_timer = {
-        .init   = gemini_timer_init,
-};
-
 static struct gpio_led ib4220b_leds[] = {
         {
                 .name                   = "nas4220b:orange:hdd",
@@ -105,6 +101,6 @@ MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
         .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
-        .timer          = &ib4220b_timer,
+        .init_time      = gemini_timer_init,
         .init_machine   = ib4220b_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index cd7437a1cea0..fa0a36337f4d 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -71,10 +71,6 @@ static struct platform_device rut1xx_leds = {
         },
 };
 
-static struct sys_timer rut1xx_timer = {
-        .init   = gemini_timer_init,
-};
-
 static void __init rut1xx_init(void)
 {
         gemini_gpio_init();
@@ -89,6 +85,6 @@ MACHINE_START(RUT100, "Teltonika RUT100")
         .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
-        .timer          = &rut1xx_timer,
+        .init_time      = gemini_timer_init,
         .init_machine   = rut1xx_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index a367880368f1..3321cd6cc1f3 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -80,10 +80,6 @@ static struct platform_device wbd111_leds_device = {
         },
 };
 
-static struct sys_timer wbd111_timer = {
-        .init   = gemini_timer_init,
-};
-
 static struct mtd_partition wbd111_partitions[] = {
         {
                 .name           = "RedBoot",
@@ -132,6 +128,6 @@ MACHINE_START(WBD111, "Wiliboard WBD-111")
         .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
-        .timer          = &wbd111_timer,
+        .init_time      = gemini_timer_init,
         .init_machine   = wbd111_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index f382811c1319..fe33c825fdaf 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -80,10 +80,6 @@ static struct platform_device wbd222_leds_device = {
         },
 };
 
-static struct sys_timer wbd222_timer = {
-        .init   = gemini_timer_init,
-};
-
 static struct mtd_partition wbd222_partitions[] = {
         {
                 .name           = "RedBoot",
@@ -132,6 +128,6 @@ MACHINE_START(WBD222, "Wiliboard WBD-222")
         .atag_offset    = 0x100,
         .map_io         = gemini_map_io,
         .init_irq       = gemini_init_irq,
-        .timer          = &wbd222_timer,
+        .init_time      = gemini_timer_init,
         .init_machine   = wbd222_init,
 MACHINE_END
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 0efa26247235..02e225673acb 100644
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -39,6 +39,4 @@ static inline void flush(void)
  */
 #define arch_decomp_setup()
 
-#define arch_decomp_wdog()
-
 #endif /* __MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index aa1331e86bcf..17ef91fa3d56 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -42,12 +42,12 @@ void __init arch_dma_init(dma_t *dma)
 }
 
 /*
- * Return usecs since last timer reload
+ * Return nsecs since last timer reload
  * (timercount * (usecs perjiffie)) / (ticks per jiffie)
  */
-unsigned long h720x_gettimeoffset(void)
+u32 h720x_gettimeoffset(void)
 {
-        return (CPU_REG (TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH;
+        return ((CPU_REG(TIMER_VIRT, TM0_COUNT) * tick_usec) / LATCH) * 1000;
 }
 
 /*
diff --git a/arch/arm/mach-h720x/common.h b/arch/arm/mach-h720x/common.h
index 2489537d33dd..7e738410ca93 100644
--- a/arch/arm/mach-h720x/common.h
+++ b/arch/arm/mach-h720x/common.h
@@ -13,18 +13,18 @@
  *
  */
 
-extern unsigned long h720x_gettimeoffset(void);
+extern u32 h720x_gettimeoffset(void);
 extern void __init h720x_init_irq(void);
 extern void __init h720x_map_io(void);
 extern void h720x_restart(char, const char *);
 
 #ifdef CONFIG_ARCH_H7202
-extern struct sys_timer h7202_timer;
+extern void h7202_timer_init(void);
 extern void __init init_hw_h7202(void);
 extern void __init h7202_init_irq(void);
 extern void __init h7202_init_time(void);
 #endif
 
 #ifdef CONFIG_ARCH_H7201
-extern struct sys_timer h7201_timer;
+extern void h7201_timer_init(void);
 #endif
diff --git a/arch/arm/mach-h720x/cpu-h7201.c b/arch/arm/mach-h720x/cpu-h7201.c
index 24df2a349a98..13c741215387 100644
--- a/arch/arm/mach-h720x/cpu-h7201.c
+++ b/arch/arm/mach-h720x/cpu-h7201.c
@@ -44,8 +44,10 @@ static struct irqaction h7201_timer_irq = {
 /*
  * Setup TIMER0 as system timer
  */
-void __init h7201_init_time(void)
+void __init h7201_timer_init(void)
 {
+        arch_gettimeoffset = h720x_gettimeoffset;
+
         CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
         CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
         CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -53,8 +55,3 @@ void __init h7201_init_time(void)
 
         setup_irq(IRQ_TIMER0, &h7201_timer_irq);
 }
-
-struct sys_timer h7201_timer = {
-        .init           = h7201_init_time,
-        .offset         = h720x_gettimeoffset,
-};
diff --git a/arch/arm/mach-h720x/cpu-h7202.c b/arch/arm/mach-h720x/cpu-h7202.c
index c37d570b852d..e2ae7e898f9d 100644
--- a/arch/arm/mach-h720x/cpu-h7202.c
+++ b/arch/arm/mach-h720x/cpu-h7202.c
@@ -178,8 +178,10 @@ static struct irqaction h7202_timer_irq = {
 /*
  * Setup TIMER0 as system timer
  */
-void __init h7202_init_time(void)
+void __init h7202_timer_init(void)
 {
+        arch_gettimeoffset = h720x_gettimeoffset;
+
         CPU_REG (TIMER_VIRT, TM0_PERIOD) = LATCH;
         CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_RESET;
         CPU_REG (TIMER_VIRT, TM0_CTRL) = TM_REPEAT | TM_START;
@@ -188,11 +190,6 @@ void __init h7202_init_time(void)
         setup_irq(IRQ_TIMER0, &h7202_timer_irq);
 }
 
-struct sys_timer h7202_timer = {
-        .init           = h7202_init_time,
-        .offset         = h720x_gettimeoffset,
-};
-
 void __init h7202_init_irq (void)
 {
         int     irq;
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 5fdb20c855e2..4fdeb686c0a9 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -32,7 +32,7 @@ MACHINE_START(H7201, "Hynix GMS30C7201")
         .atag_offset    = 0x1000,
         .map_io         = h720x_map_io,
         .init_irq       = h720x_init_irq,
-        .timer          = &h7201_timer,
+        .init_time      = h7201_timer_init,
         .dma_zone_size  = SZ_256M,
         .restart        = h720x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 169673036c59..f68e967a2062 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -74,7 +74,7 @@ MACHINE_START(H7202, "Hynix HMS30C7202")
         .atag_offset    = 0x100,
         .map_io         = h720x_map_io,
         .init_irq       = h7202_init_irq,
-        .timer          = &h7202_timer,
+        .init_time      = h7202_timer_init,
         .init_machine   = init_eval_h7202,
         .dma_zone_size  = SZ_256M,
         .restart        = h720x_restart,
diff --git a/arch/arm/mach-h720x/include/mach/uncompress.h b/arch/arm/mach-h720x/include/mach/uncompress.h
index d6623234f61e..43e343c4b50a 100644
--- a/arch/arm/mach-h720x/include/mach/uncompress.h
+++ b/arch/arm/mach-h720x/include/mach/uncompress.h
@@ -32,6 +32,5 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 65656ff0eb33..a4f9f50247d4 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -18,6 +18,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
@@ -34,7 +35,6 @@
 #include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/timer-sp.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -68,12 +68,6 @@ void highbank_set_cpu_jump(int cpu, void *jump_addr)
                           HB_JUMP_TABLE_PHYS(cpu) + 15);
 }
 
-const static struct of_device_id irq_match[] = {
-        { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        {}
-};
-
 #ifdef CONFIG_CACHE_L2X0
 static void highbank_l2x0_disable(void)
 {
@@ -84,7 +78,7 @@ static void highbank_l2x0_disable(void)
 
 static void __init highbank_init_irq(void)
 {
-        of_irq_init(irq_match);
+        irqchip_init();
 
         if (of_find_compatible_node(NULL, NULL, "arm,cortex-a9"))
                 highbank_scu_map_io();
@@ -131,10 +125,6 @@ static void __init highbank_timer_init(void)
         arch_timer_sched_clock_init();
 }
 
-static struct sys_timer highbank_timer = {
-        .init = highbank_timer_init,
-};
-
 static void highbank_power_off(void)
 {
         highbank_set_pwr_shutdown();
@@ -211,8 +201,7 @@ DT_MACHINE_START(HIGHBANK, "Highbank")
         .smp            = smp_ops(highbank_smp_ops),
         .map_io         = debug_ll_io_init,
         .init_irq       = highbank_init_irq,
-        .timer          = &highbank_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = highbank_timer_init,
         .init_machine   = highbank_init,
         .dt_compat      = highbank_match,
         .restart        = highbank_restart,
diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c
index 4ecc864ac8b9..8797a7001720 100644
--- a/arch/arm/mach-highbank/platsmp.c
+++ b/arch/arm/mach-highbank/platsmp.c
@@ -17,9 +17,9 @@
 #include <linux/init.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 
 #include "core.h"
 
@@ -33,7 +33,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
 static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
         highbank_set_cpu_jump(cpu, secondary_startup);
-        gic_raise_softirq(cpumask_of(cpu), 0);
+        arch_send_wakeup_ipi_mask(cpumask_of(cpu));
         return 0;
 }
 
@@ -56,8 +56,6 @@ static void __init highbank_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 64b40a4615b5..4c9c6f9d2c55 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -95,9 +95,6 @@ config MACH_MX27
 config ARCH_MX5
         bool
 
-config ARCH_MX50
-        bool
-
 config ARCH_MX51
         bool
 
@@ -164,11 +161,6 @@ config SOC_IMX5
         select CPU_V7
         select MXC_TZIC
 
-config SOC_IMX50
-        bool
-        select ARCH_MX50
-        select SOC_IMX5
-
 config  SOC_IMX51
         bool
         select ARCH_MX5
@@ -738,25 +730,10 @@ endif
 
 if ARCH_MULTI_V7
 
-comment "i.MX5 platforms:"
-
-config MACH_MX50_RDP
-        bool "Support MX50 reference design platform"
-        depends on BROKEN
-        select IMX_HAVE_PLATFORM_IMX_I2C
-        select IMX_HAVE_PLATFORM_IMX_UART
-        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-        select IMX_HAVE_PLATFORM_SPI_IMX
-        select SOC_IMX50
-        help
-          Include support for MX50 reference design platform (RDP) board. This
-          includes specific configurations for the board and its peripherals.
-
 comment "i.MX51 machines:"
 
 config MACH_IMX51_DT
         bool "Support i.MX51 platforms from device tree"
-        select MACH_MX51_BABBAGE
         select SOC_IMX51
         help
           Include support for Freescale i.MX51 based platforms
@@ -777,19 +754,6 @@ config MACH_MX51_BABBAGE
           u-boot. This includes specific configurations for the board and its
           peripherals.
 
-config MACH_MX51_3DS
-        bool "Support MX51PDK (3DS)"
-        select IMX_HAVE_PLATFORM_IMX2_WDT
-        select IMX_HAVE_PLATFORM_IMX_KEYPAD
-        select IMX_HAVE_PLATFORM_IMX_UART
-        select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-        select IMX_HAVE_PLATFORM_SPI_IMX
-        select MXC_DEBUG_BOARD
-        select SOC_IMX51
-        help
-          Include support for MX51PDK (3DS) platform. This includes specific
-          configurations for the board and its peripherals.
-
 config MACH_EUKREA_CPUIMX51SD
         bool "Support Eukrea CPUIMX51SD module"
         select IMX_HAVE_PLATFORM_FSL_USB2_UDC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 0634b3152c24..240e0294c372 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -88,7 +88,6 @@ obj-$(CONFIG_MACH_EUKREA_CPUIMX35SD) += mach-cpuimx35.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD35_BASEBOARD) += eukrea_mbimxsd35-baseboard.o
 obj-$(CONFIG_MACH_VPR200) += mach-vpr200.o
 
-obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
@@ -103,10 +102,8 @@ endif
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index b27815de8473..41ba1bb0437b 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -22,10 +22,6 @@ zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
 params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
 initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
 
-zreladdr-$(CONFIG_SOC_IMX50)    += 0x70008000
-params_phys-$(CONFIG_SOC_IMX50) := 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000
-
 zreladdr-$(CONFIG_SOC_IMX51)    += 0x90008000
 params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
 initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index c0c4e723b7f5..19644f6524dc 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -56,8 +56,6 @@
 
 static void __iomem *ccm_base;
 
-void __init imx6q_clock_map_io(void) { }
-
 int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
 {
         u32 val = readl_relaxed(ccm_base + CLPCR);
diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h
index fa36fb84ab19..76c420043289 100644
--- a/arch/arm/mach-imx/common.h
+++ b/arch/arm/mach-imx/common.h
@@ -21,7 +21,6 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mx50_map_io(void);
 extern void mx51_map_io(void);
 extern void mx53_map_io(void);
 extern void imx1_init_early(void);
@@ -30,7 +29,6 @@ extern void imx25_init_early(void);
 extern void imx27_init_early(void);
 extern void imx31_init_early(void);
 extern void imx35_init_early(void);
-extern void imx50_init_early(void);
 extern void imx51_init_early(void);
 extern void imx53_init_early(void);
 extern void mxc_init_irq(void __iomem *);
@@ -41,7 +39,6 @@ extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
-extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
 extern void imx1_soc_init(void);
@@ -50,7 +47,6 @@ extern void imx25_soc_init(void);
 extern void imx27_soc_init(void);
 extern void imx31_soc_init(void);
 extern void imx35_soc_init(void);
-extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
 extern void imx51_init_late(void);
 extern void imx53_init_late(void);
@@ -109,18 +105,11 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx27_handle_irq avic_handle_irq
 #define imx31_handle_irq avic_handle_irq
 #define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
-#define imx6q_handle_irq gic_handle_irq
 
 extern void imx_enable_cpu(int cpu, bool enable);
 extern void imx_set_cpu_jump(int cpu, void *jump_addr);
-#ifdef CONFIG_DEBUG_LL
-extern void imx_lluart_map_io(void);
-#else
-static inline void imx_lluart_map_io(void) {}
-#endif
 extern void v7_cpu_resume(void);
 extern u32 *pl310_get_save_ptr(void);
 #ifdef CONFIG_SMP
@@ -139,7 +128,6 @@ extern void imx_gpc_init(void);
 extern void imx_gpc_pre_suspend(void);
 extern void imx_gpc_post_resume(void);
 extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
-extern void imx6q_clock_map_io(void);
 
 extern void imx_cpu_die(unsigned int cpu);
 extern int imx_cpu_kill(unsigned int cpu);
diff --git a/arch/arm/mach-imx/cpu-imx5.c b/arch/arm/mach-imx/cpu-imx5.c
index d88760014ff9..d7ce72252a4e 100644
--- a/arch/arm/mach-imx/cpu-imx5.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
@@ -22,7 +22,6 @@
 static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
-#define MX50_HW_ADADIG_DIGPROG  0xB0
 
 static int get_mx51_srev(void)
 {
@@ -108,41 +107,3 @@ int mx53_revision(void)
         return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx53_revision);
-
-static int get_mx50_srev(void)
-{
-        void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
-        u32 rev;
-
-        if (!anatop) {
-                mx5_cpu_rev = -EINVAL;
-                return 0;
-        }
-
-        rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
-        rev &= 0xff;
-
-        iounmap(anatop);
-        if (rev == 0x0)
-                return IMX_CHIP_REVISION_1_0;
-        else if (rev == 0x1)
-                return IMX_CHIP_REVISION_1_1;
-        return 0;
-}
-
-/*
- * Returns:
- *      the silicon revision of the cpu
- *      -EINVAL - not a mx50
- */
-int mx50_revision(void)
-{
-        if (!cpu_is_mx50())
-                return -EINVAL;
-
-        if (mx5_cpu_rev == -1)
-                mx5_cpu_rev = get_mx50_srev();
-
-        return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx50_revision);
diff --git a/arch/arm/mach-imx/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
deleted file mode 100644
index 2c290391f298..000000000000
--- a/arch/arm/mach-imx/devices-imx50.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
-#define imx50_add_imx_uart(id, pdata)   \
-        imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-
-extern const struct imx_fec_data imx50_fec_data;
-#define imx50_add_fec(pdata)    \
-        imx_add_fec(&imx50_fec_data, pdata)
-
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
-#define imx50_add_imx_i2c(id, pdata)    \
-        imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)
diff --git a/arch/arm/mach-imx/devices/Kconfig b/arch/arm/mach-imx/devices/Kconfig
index 9a8f1ca7bcb1..9b9ba1f4ffe1 100644
--- a/arch/arm/mach-imx/devices/Kconfig
+++ b/arch/arm/mach-imx/devices/Kconfig
@@ -1,6 +1,6 @@
 config IMX_HAVE_PLATFORM_FEC
         bool
-        default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
+        default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
 
 config IMX_HAVE_PLATFORM_FLEXCAN
         bool
diff --git a/arch/arm/mach-imx/devices/platform-fec.c b/arch/arm/mach-imx/devices/platform-fec.c
index 2cb188ad9a0a..63eba08f87b1 100644
--- a/arch/arm/mach-imx/devices/platform-fec.c
+++ b/arch/arm/mach-imx/devices/platform-fec.c
@@ -35,12 +35,6 @@ const struct imx_fec_data imx35_fec_data __initconst =
         imx_fec_data_entry_single(MX35, "imx27-fec");
 #endif
 
-#ifdef CONFIG_SOC_IMX50
-/* i.mx50 has the i.mx25 type fec */
-const struct imx_fec_data imx50_fec_data __initconst =
-        imx_fec_data_entry_single(MX50, "imx25-fec");
-#endif
-
 #ifdef CONFIG_SOC_IMX51
 /* i.mx51 has the i.mx27 type fec */
 const struct imx_fec_data imx51_fec_data __initconst =
diff --git a/arch/arm/mach-imx/devices/platform-imx-i2c.c b/arch/arm/mach-imx/devices/platform-imx-i2c.c
index 8e30e5703cd2..57d342e85c2f 100644
--- a/arch/arm/mach-imx/devices/platform-imx-i2c.c
+++ b/arch/arm/mach-imx/devices/platform-imx-i2c.c
@@ -70,16 +70,6 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
-#define imx50_imx_i2c_data_entry(_id, _hwid)                            \
-        imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
-        imx50_imx_i2c_data_entry(0, 1),
-        imx50_imx_i2c_data_entry(1, 2),
-        imx50_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #define imx51_imx_i2c_data_entry(_id, _hwid)                            \
diff --git a/arch/arm/mach-imx/devices/platform-imx-uart.c b/arch/arm/mach-imx/devices/platform-imx-uart.c
index 67bf866a2cb6..faac4aa6ca6d 100644
--- a/arch/arm/mach-imx/devices/platform-imx-uart.c
+++ b/arch/arm/mach-imx/devices/platform-imx-uart.c
@@ -94,18 +94,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = {
-#define imx50_imx_uart_data_entry(_id, _hwid)                           \
-        imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K)
-        imx50_imx_uart_data_entry(0, 1),
-        imx50_imx_uart_data_entry(1, 2),
-        imx50_imx_uart_data_entry(2, 3),
-        imx50_imx_uart_data_entry(3, 4),
-        imx50_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX50 */
-
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
 #define imx51_imx_uart_data_entry(_id, _hwid)                           \
diff --git a/arch/arm/mach-imx/epit.c b/arch/arm/mach-imx/epit.c
index 04a5961beeac..e02de188ae83 100644
--- a/arch/arm/mach-imx/epit.c
+++ b/arch/arm/mach-imx/epit.c
@@ -178,7 +178,6 @@ static struct irqaction epit_timer_irq = {
 static struct clock_event_device clockevent_epit = {
         .name           = "epit",
         .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .set_mode       = epit_set_mode,
         .set_next_event = epit_set_next_event,
         .rating         = 200,
@@ -186,18 +185,10 @@ static struct clock_event_device clockevent_epit = {
 
 static int __init epit_clockevent_init(struct clk *timer_clk)
 {
-        unsigned int c = clk_get_rate(timer_clk);
-
-        clockevent_epit.mult = div_sc(c, NSEC_PER_SEC,
-                                        clockevent_epit.shift);
-        clockevent_epit.max_delta_ns =
-                        clockevent_delta2ns(0xfffffffe, &clockevent_epit);
-        clockevent_epit.min_delta_ns =
-                        clockevent_delta2ns(0x800, &clockevent_epit);
-
         clockevent_epit.cpumask = cpumask_of(0);
-
-        clockevents_register_device(&clockevent_epit);
+        clockevents_config_and_register(&clockevent_epit,
+                                        clk_get_rate(timer_clk),
+                                        0x800, 0xfffffffe);
 
         return 0;
 }
diff --git a/arch/arm/mach-imx/gpc.c b/arch/arm/mach-imx/gpc.c
index e1537f9e45b8..ff24920699e4 100644
--- a/arch/arm/mach-imx/gpc.c
+++ b/arch/arm/mach-imx/gpc.c
@@ -15,7 +15,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 
 #define GPC_IMR1                0x008
 #define GPC_PGC_CPU_PDN         0x2a0
diff --git a/arch/arm/mach-imx/hardware.h b/arch/arm/mach-imx/hardware.h
index 3ce7fa3bd43f..911e9b31b03f 100644
--- a/arch/arm/mach-imx/hardware.h
+++ b/arch/arm/mach-imx/hardware.h
@@ -72,11 +72,6 @@
  *      AVIC    0x68000000+0x100000     ->      0xf5800000+0x100000
  *      X_MEMC  0xb8000000+0x010000     ->      0xf5c00000+0x010000
  *      SPBA0   0x50000000+0x100000     ->      0xf5400000+0x100000
- * mx50:
- *      TZIC    0x0fffc000+0x004000     ->      0xf4bfc000+0x004000
- *      AIPS1   0x53f00000+0x100000     ->      0xf5700000+0x100000
- *      SPBA0   0x50000000+0x100000     ->      0xf5400000+0x100000
- *      AIPS2   0x63f00000+0x100000     ->      0xf5300000+0x100000
  * mx51:
  *      TZIC    0x0fffc000+0x004000     ->      0xf4bfc000+0x004000
  *      IRAM    0x1ffe0000+0x020000     ->      0xf4fe0000+0x020000
@@ -108,7 +103,6 @@
 #include "mxc.h"
 
 #include "mx6q.h"
-#include "mx50.h"
 #include "mx51.h"
 #include "mx53.h"
 #include "mx3x.h"
diff --git a/arch/arm/mach-imx/imx25-dt.c b/arch/arm/mach-imx/imx25-dt.c
index e17dfbc42192..03b65e5ea541 100644
--- a/arch/arm/mach-imx/imx25-dt.c
+++ b/arch/arm/mach-imx/imx25-dt.c
@@ -22,15 +22,6 @@ static void __init imx25_dt_init(void)
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init imx25_timer_init(void)
-{
-        mx25_clocks_init_dt();
-}
-
-static struct sys_timer imx25_timer = {
-        .init = imx25_timer_init,
-};
-
 static const char * const imx25_dt_board_compat[] __initconst = {
         "fsl,imx25",
         NULL
@@ -41,7 +32,7 @@ DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
         .init_early     = imx25_init_early,
         .init_irq       = mx25_init_irq,
         .handle_irq     = imx25_handle_irq,
-        .timer          = &imx25_timer,
+        .init_time      = imx25_timer_init,
         .init_machine   = imx25_dt_init,
         .dt_compat      = imx25_dt_board_compat,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index ebfae96543c4..c915a490a11c 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -39,26 +39,22 @@ static void __init imx27_dt_init(void)
                              imx27_auxdata_lookup, NULL);
 }
 
-static void __init imx27_timer_init(void)
-{
-        mx27_clocks_init_dt();
-}
-
-static struct sys_timer imx27_timer = {
-        .init = imx27_timer_init,
-};
-
 static const char * const imx27_dt_board_compat[] __initconst = {
         "fsl,imx27",
         NULL
 };
 
+static void __init imx27_timer_init(void)
+{
+        mx27_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
         .map_io         = mx27_map_io,
         .init_early     = imx27_init_early,
         .init_irq       = mx27_init_irq,
         .handle_irq     = imx27_handle_irq,
-        .timer          = &imx27_timer,
+        .init_time      = imx27_timer_init,
         .init_machine   = imx27_dt_init,
         .dt_compat      = imx27_dt_board_compat,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c
index af476de2570e..b5c04eece780 100644
--- a/arch/arm/mach-imx/imx31-dt.c
+++ b/arch/arm/mach-imx/imx31-dt.c
@@ -38,26 +38,22 @@ static void __init imx31_dt_init(void)
                              imx31_auxdata_lookup, NULL);
 }
 
-static void __init imx31_timer_init(void)
-{
-        mx31_clocks_init_dt();
-}
-
-static struct sys_timer imx31_timer = {
-        .init = imx31_timer_init,
-};
-
 static const char *imx31_dt_board_compat[] __initdata = {
         "fsl,imx31",
         NULL
 };
 
+static void __init imx31_dt_timer_init(void)
+{
+        mx31_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)")
         .map_io         = mx31_map_io,
         .init_early     = imx31_init_early,
         .init_irq       = mx31_init_irq,
         .handle_irq     = imx31_handle_irq,
-        .timer          = &imx31_timer,
+        .init_time      = imx31_dt_timer_init,
         .init_machine   = imx31_dt_init,
         .dt_compat      = imx31_dt_board_compat,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5ffa40c673f8..e2926a8863f8 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -24,26 +24,22 @@ static void __init imx51_dt_init(void)
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init imx51_timer_init(void)
-{
-        mx51_clocks_init_dt();
-}
-
-static struct sys_timer imx51_timer = {
-        .init = imx51_timer_init,
-};
-
 static const char *imx51_dt_board_compat[] __initdata = {
         "fsl,imx51",
         NULL
 };
 
+static void __init imx51_timer_init(void)
+{
+        mx51_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX51_DT, "Freescale i.MX51 (Device Tree Support)")
         .map_io         = mx51_map_io,
         .init_early     = imx51_init_early,
         .init_irq       = mx51_init_irq,
         .handle_irq     = imx51_handle_irq,
-        .timer          = &imx51_timer,
+        .init_time      = imx51_timer_init,
         .init_machine   = imx51_dt_init,
         .init_late      = imx51_init_late,
         .dt_compat      = imx51_dt_board_compat,
diff --git a/arch/arm/mach-imx/iomux-mx50.h b/arch/arm/mach-imx/iomux-mx50.h
deleted file mode 100644
index 00f56e0e8009..000000000000
--- a/arch/arm/mach-imx/iomux-mx50.h
+++ /dev/null
@@ -1,977 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_IOMUX_MX50_H__
-#define __MACH_IOMUX_MX50_H__
-
-#include "iomux-v3.h"
-
-#define MX50_ELCDIF_PAD_CTRL    (PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_SD_PAD_CTRL        (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-                                        PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_UART_PAD_CTRL      (PAD_CTL_DSE_HIGH | PAD_CTL_PKE)
-
-#define MX50_I2C_PAD_CTRL       (PAD_CTL_ODE | PAD_CTL_DSE_HIGH | \
-                                        PAD_CTL_PUS_100K_UP | PAD_CTL_HYS)
-
-#define MX50_USB_PAD_CTRL       (PAD_CTL_PKE | PAD_CTL_PUE | \
-                                        PAD_CTL_DSE_HIGH | PAD_CTL_PUS_47K_UP)
-
-#define MX50_FEC_PAD_CTRL       (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-                                        PAD_CTL_PUS_22K_UP | PAD_CTL_ODE | \
-                                        PAD_CTL_DSE_HIGH)
-
-#define MX50_OWIRE_PAD_CTRL     (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-                                        PAD_CTL_PUS_100K_UP | PAD_CTL_ODE | \
-                                        PAD_CTL_DSE_HIGH | PAD_CTL_SRE_FAST)
-
-#define MX50_KEYPAD_CTRL        (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
-                                        PAD_CTL_PUS_100K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_CSPI_SS_PAD        (PAD_CTL_PKE | PAD_CTL_PUE | \
-                                        PAD_CTL_PUS_22K_UP | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL0__KEY_COL0     IOMUX_PAD(0x2CC, 0x20, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__GPIO_4_0     IOMUX_PAD(0x2CC, 0x20, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL0__NANDF_CLE    IOMUX_PAD(0x2CC, 0x20, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW0__KEY_ROW0     IOMUX_PAD(0x2D0, 0x24, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW0__GPIO_4_1     IOMUX_PAD(0x2D0, 0x24, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW0__NANDF_ALE    IOMUX_PAD(0x2D0, 0x24, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL1__KEY_COL1     IOMUX_PAD(0x2D4, 0x28, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__GPIO_4_2     IOMUX_PAD(0x2D4, 0x28, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL1__NANDF_CE0    IOMUX_PAD(0x2D4, 0x28, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW1__KEY_ROW1     IOMUX_PAD(0x2D8, 0x2C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW1__GPIO_4_3     IOMUX_PAD(0x2D8, 0x2C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW1__NANDF_CE1    IOMUX_PAD(0x2D8, 0x2C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL2__KEY_COL2     IOMUX_PAD(0x2DC, 0x30, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_COL2__GPIO_4_4     IOMUX_PAD(0x2DC, 0x30, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL2__NANDF_CE2    IOMUX_PAD(0x2DC, 0x30, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_ROW2__KEY_ROW2     IOMUX_PAD(0x2E0, 0x34, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW2__GPIO_4_5     IOMUX_PAD(0x2E0, 0x34, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW2__NANDF_CE3    IOMUX_PAD(0x2E0, 0x34, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_KEY_COL3__KEY_COL3     IOMUX_PAD(0x2E4, 0x38, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__GPIO_4_6     IOMUX_PAD(0x2E4, 0x38, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_COL3__NANDF_READY  IOMUX_PAD(0x2E4, 0x38, 2, 0x7b4, 0, PAD_CTL_PKE | \
-                                                        PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_KEY_COL3__SDMA_EXT0    IOMUX_PAD(0x2E4, 0x38, 6, 0x7b8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_KEY_ROW3__KEY_ROW3     IOMUX_PAD(0x2E8, 0x3C, 0, 0x0, 0, MX50_KEYPAD_CTRL)
-#define MX50_PAD_KEY_ROW3__GPIO_4_7     IOMUX_PAD(0x2E8, 0x3C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_KEY_ROW3__NANDF_DQS    IOMUX_PAD(0x2E8, 0x3C, 2, 0x7b0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_KEY_ROW3__SDMA_EXT1    IOMUX_PAD(0x2E8, 0x3C, 6, 0x7bc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SCL__I2C1_SCL     IOMUX_PAD(0x2EC, 0x40, IOMUX_CONFIG_SION, 0x0, 0, \
-                                                        MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__GPIO_6_18    IOMUX_PAD(0x2EC, 0x40, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SCL__UART2_TXD    IOMUX_PAD(0x2EC, 0x40, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C1_SDA__I2C1_SDA     IOMUX_PAD(0x2F0, 0x44, IOMUX_CONFIG_SION, 0x0, 0, \
-                                                        MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__GPIO_6_19    IOMUX_PAD(0x2F0, 0x44, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C1_SDA__UART2_RXD    IOMUX_PAD(0x2F0, 0x44, 2, 0x7cc, 1, MX50_UART_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SCL__I2C2_SCL     IOMUX_PAD(0x2F4, 0x48, IOMUX_CONFIG_SION, 0x0, 0, \
-                                                        MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__GPIO_6_20    IOMUX_PAD(0x2F4, 0x48, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__UART2_CTS    IOMUX_PAD(0x2F4, 0x48, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SCL__DCDC_OK      IOMUX_PAD(0x2F4, 0x48, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C2_SDA__I2C2_SDA     IOMUX_PAD(0x2F8, 0x4C, IOMUX_CONFIG_SION, 0x0, 0, \
-                                                        MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__GPIO_6_21    IOMUX_PAD(0x2F8, 0x4C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__UART2_RTS    IOMUX_PAD(0x2F8, 0x4C, 2, 0x7c8, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_I2C2_SDA__PWRSTABLE    IOMUX_PAD(0x2F8, 0x4C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SCL__I2C3_SCL     IOMUX_PAD(0x2FC, 0x50, IOMUX_CONFIG_SION, 0x0, 0, \
-                                                        MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPIO_6_22    IOMUX_PAD(0x2FC, 0x50, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__FEC_MDC      IOMUX_PAD(0x2FC, 0x50, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_I2C3_SCL__PMIC_RDY     IOMUX_PAD(0x2FC, 0x50, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__GPT_CAPIN1   IOMUX_PAD(0x2FC, 0x50, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SCL__USBOTG_OC    IOMUX_PAD(0x2FC, 0x50, 7, 0x7E8, 0, MX50_USB_PAD_CTRL)
-
-#define MX50_PAD_I2C3_SDA__I2C3_SDA     IOMUX_PAD(0x300, 0x54, IOMUX_CONFIG_SION, 0x0, 0, \
-                                                                MX50_I2C_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPIO_6_23    IOMUX_PAD(0x300, 0x54, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__FEC_MDIO     IOMUX_PAD(0x300, 0x54, 2, 0x774, 0, MX50_FEC_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__PWRFAIL_INT  IOMUX_PAD(0x300, 0x54, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__ALARM_DEB    IOMUX_PAD(0x300, 0x54, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__GPT_CAPIN1   IOMUX_PAD(0x300, 0x54, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_I2C3_SDA__USBOTG_PWR   IOMUX_PAD(0x300, 0x54, 7, 0x0, 0, \
-                                                        PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_PWM1__PWM1_PWMO        IOMUX_PAD(0x304, 0x58, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__GPIO_6_24        IOMUX_PAD(0x304, 0x58, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM1__USBOTG_OC        IOMUX_PAD(0x304, 0x58, 2, 0x7E8, 1, MX50_USB_PAD_CTRL)
-#define MX50_PAD_PWM1__GPT_CMPOUT1      IOMUX_PAD(0x304, 0x58, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PWM2__PWM2_PWMO        IOMUX_PAD(0x308, 0x5C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPIO_6_25        IOMUX_PAD(0x308, 0x5C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__USBOTG_PWR       IOMUX_PAD(0x308, 0x5C, 2, 0x0, 0, \
-                                                        PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_PWM2__DCDC_PWM         IOMUX_PAD(0x308, 0x5C, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__GPT_CMPOUT2      IOMUX_PAD(0x308, 0x5C, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_PWM2__ANY_PU_RST       IOMUX_PAD(0x308, 0x5C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_OWIRE__OWIRE           IOMUX_PAD(0x30C, 0x60, 0, 0x0, 0, MX50_OWIRE_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPIO_6_26       IOMUX_PAD(0x30C, 0x60, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__USBH1_OC        IOMUX_PAD(0x30C, 0x60, 2, 0x0, 0, MX50_USB_PAD_CTRL)
-#define MX50_PAD_OWIRE__SSI_EXT1_CLK    IOMUX_PAD(0x30C, 0x60, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__EPDC_PWRIRQ     IOMUX_PAD(0x30C, 0x60, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_OWIRE__GPT_CMPOUT3     IOMUX_PAD(0x30C, 0x60, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPITO__EPITO           IOMUX_PAD(0x310, 0x64, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPIO_6_27       IOMUX_PAD(0x310, 0x64, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__USBH1_PWR       IOMUX_PAD(0x310, 0x64, 2, 0x0, 0, \
-                                                        PAD_CTL_PKE | PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EPITO__SSI_EXT2_CLK    IOMUX_PAD(0x310, 0x64, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__TOG_EN          IOMUX_PAD(0x310, 0x64, 4, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPITO__GPT_CLKIN       IOMUX_PAD(0x310, 0x64, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_WDOG__WDOG             IOMUX_PAD(0x314, 0x68, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__GPIO_6_28        IOMUX_PAD(0x314, 0x68, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__WDOG_RST         IOMUX_PAD(0x314, 0x68, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_WDOG__XTAL32K          IOMUX_PAD(0x314, 0x68, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXFS__SSI_TXFS     IOMUX_PAD(0x318, 0x6C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXFS__GPIO_6_0     IOMUX_PAD(0x318, 0x6C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXC__SSI_TXC       IOMUX_PAD(0x31C, 0x70, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXC__GPIO_6_1      IOMUX_PAD(0x31C, 0x70, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_TXD__SSI_TXD       IOMUX_PAD(0x320, 0x74, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__GPIO_6_2      IOMUX_PAD(0x320, 0x74, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_TXD__CSPI_RDY      IOMUX_PAD(0x320, 0x74, 4, 0x6e8, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SSI_RXD__SSI_RXD       IOMUX_PAD(0x324, 0x78, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__GPIO_6_3      IOMUX_PAD(0x324, 0x78, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXD__CSPI_SS3      IOMUX_PAD(0x324, 0x78, 4, 0x6f4, 0, MX50_CSPI_SS_PAD)
-
-#define MX50_PAD_SSI_RXFS__AUD3_RXFS    IOMUX_PAD(0x328, 0x7C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__GPIO_6_4     IOMUX_PAD(0x328, 0x7C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__UART5_TXD    IOMUX_PAD(0x328, 0x7C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__WEIM_D6      IOMUX_PAD(0x328, 0x7C, 3, 0x804, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXFS__CSPI_SS2     IOMUX_PAD(0x328, 0x7C, 4, 0x6f0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXFS__FEC_COL      IOMUX_PAD(0x328, 0x7C, 5, 0x770, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SSI_RXFS__FEC_MDC      IOMUX_PAD(0x328, 0x7C, 6, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_SSI_RXC__AUD3_RXC      IOMUX_PAD(0x32C, 0x80, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__GPIO_6_5      IOMUX_PAD(0x32C, 0x80, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__UART5_RXD     IOMUX_PAD(0x32C, 0x80, 2, 0x7e4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__WEIM_D7       IOMUX_PAD(0x32C, 0x80, 3, 0x808, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__CSPI_SS1      IOMUX_PAD(0x32C, 0x80, 4, 0x6ec, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_SSI_RXC__FEC_RX_CLK    IOMUX_PAD(0x32C, 0x80, 5, 0x780, 0, NO_PAD_CTRL)
-#define MX50_PAD_SSI_RXC__FEC_MDIO      IOMUX_PAD(0x32C, 0x80, 6, 0x774, 1, MX50_FEC_PAD_CTRL)
-
-#define MX50_PAD_UART1_TXD__UART1_TXD   IOMUX_PAD(0x330, 0x84, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_TXD__GPIO_6_6    IOMUX_PAD(0x330, 0x84, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_RXD__UART1_RXD   IOMUX_PAD(0x334, 0x88, 0, 0x7c4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RXD__GPIO_6_7    IOMUX_PAD(0x334, 0x88, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART1_CTS__UART1_CTS   IOMUX_PAD(0x338, 0x8C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__GPIO_6_8    IOMUX_PAD(0x338, 0x8C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__UART5_TXD   IOMUX_PAD(0x338, 0x8C, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_D4      IOMUX_PAD(0x338, 0x8C, 4, 0x760, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_CTS__SD4_CMD     IOMUX_PAD(0x338, 0x8C, 5, 0x74c, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART1_RTS__UART1_RTS   IOMUX_PAD(0x33C, 0x90, 0, 0x7c0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__GPIO_6_9    IOMUX_PAD(0x33C, 0x90, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__UART5_RXD   IOMUX_PAD(0x33C, 0x90, 2, 0x7e4, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_D5      IOMUX_PAD(0x33C, 0x90, 4, 0x764, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART1_RTS__SD4_CLK     IOMUX_PAD(0x33C, 0x90, 5, 0x748, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_TXD__UART2_TXD   IOMUX_PAD(0x340, 0x94, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__GPIO_6_10   IOMUX_PAD(0x340, 0x94, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D6      IOMUX_PAD(0x340, 0x94, 4, 0x768, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_TXD__SD4_D4      IOMUX_PAD(0x340, 0x94, 5, 0x760, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RXD__UART2_RXD   IOMUX_PAD(0x344, 0x98, 0, 0x7cc, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__GPIO_6_11   IOMUX_PAD(0x344, 0x98, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D7      IOMUX_PAD(0x344, 0x98, 4, 0x76c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RXD__SD4_D5      IOMUX_PAD(0x344, 0x98, 5, 0x764, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_CTS__UART2_CTS   IOMUX_PAD(0x348, 0x9C, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__GPIO_6_12   IOMUX_PAD(0x348, 0x9C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_CMD     IOMUX_PAD(0x348, 0x9C, 4, 0x74c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_CTS__SD4_D6      IOMUX_PAD(0x348, 0x9C, 5, 0x768, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART2_RTS__UART2_RTS   IOMUX_PAD(0x34C, 0xA0, 0, 0x7c8, 3, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__GPIO_6_13   IOMUX_PAD(0x34C, 0xA0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_CLK     IOMUX_PAD(0x34C, 0xA0, 4, 0x748, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART2_RTS__SD4_D7      IOMUX_PAD(0x34C, 0xA0, 5, 0x76c, 1, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_UART3_TXD__UART3_TXD   IOMUX_PAD(0x350, 0xA4, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__GPIO_6_14   IOMUX_PAD(0x350, 0xA4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD1_D4      IOMUX_PAD(0x350, 0xA4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD4_D0      IOMUX_PAD(0x350, 0xA4, 4, 0x750, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__SD2_WP      IOMUX_PAD(0x350, 0xA4, 5, 0x744, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_TXD__WEIM_D12    IOMUX_PAD(0x350, 0xA4, 6, 0x81c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART3_RXD__UART3_RXD   IOMUX_PAD(0x354, 0xA8, 0, 0x7d4, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__GPIO_6_15   IOMUX_PAD(0x354, 0xA8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD1_D5      IOMUX_PAD(0x354, 0xA8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD4_D1      IOMUX_PAD(0x354, 0xA8, 4, 0x754, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__SD2_CD      IOMUX_PAD(0x354, 0xA8, 5, 0x740, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART3_RXD__WEIM_D13    IOMUX_PAD(0x354, 0xA8, 6, 0x820, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_TXD__UART4_TXD   IOMUX_PAD(0x358, 0xAC, 0, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__GPIO_6_16   IOMUX_PAD(0x358, 0xAC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__UART3_CTS   IOMUX_PAD(0x358, 0xAC, 2, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD1_D6      IOMUX_PAD(0x358, 0xAC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD4_D2      IOMUX_PAD(0x358, 0xAC, 4, 0x758, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__SD2_LCTL    IOMUX_PAD(0x358, 0xAC, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_TXD__WEIM_D14    IOMUX_PAD(0x358, 0xAC, 6, 0x824, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_UART4_RXD__UART4_RXD   IOMUX_PAD(0x35C, 0xB0, 0, 0x7dc, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__GPIO_6_17   IOMUX_PAD(0x35C, 0xB0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__UART3_RTS   IOMUX_PAD(0x35C, 0xB0, 2, 0x7d0, 1, MX50_UART_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_D7      IOMUX_PAD(0x35C, 0xB0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD4_D3      IOMUX_PAD(0x35C, 0xB0, 4, 0x75c, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__SD1_LCTL    IOMUX_PAD(0x35C, 0xB0, 5, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_UART4_RXD__WEIM_D15    IOMUX_PAD(0x35C, 0xB0, 6, 0x828, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SCLK__CSPI_SCLK   IOMUX_PAD(0x360, 0xB4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_SCLK__GPIO_4_8    IOMUX_PAD(0x360, 0xB4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MOSI__CSPI_MOSI   IOMUX_PAD(0x364, 0xB8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MOSI__GPIO_4_9    IOMUX_PAD(0x364, 0xB8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_MISO__CSPI_MISO   IOMUX_PAD(0x368, 0xBC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_CSPI_MISO__GPIO_4_10   IOMUX_PAD(0x368, 0xBC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_CSPI_SS0__CSPI_SS0     IOMUX_PAD(0x36C, 0xC0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_CSPI_SS0__GPIO_4_11    IOMUX_PAD(0x36C, 0xC0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SCLK__ECSPI1_SCLK       IOMUX_PAD(0x370, 0xC4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__GPIO_4_12         IOMUX_PAD(0x370, 0xC4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__CSPI_RDY          IOMUX_PAD(0x370, 0xC4, 2, 0x6e8, 1, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__ECSPI2_RDY        IOMUX_PAD(0x370, 0xC4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__UART3_RTS         IOMUX_PAD(0x370, 0xC4, 4, 0x7d0, 2, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__EPDC_SDCE6        IOMUX_PAD(0x370, 0xC4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SCLK__WEIM_D8           IOMUX_PAD(0x370, 0xC4, 7, 0x80c, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MOSI__ECSPI1_MOSI       IOMUX_PAD(0x374, 0xC8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__GPIO_4_13         IOMUX_PAD(0x374, 0xC8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__CSPI_SS1          IOMUX_PAD(0x374, 0xC8, 2, 0x6ec, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__ECSPI2_SS1        IOMUX_PAD(0x374, 0xC8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MOSI__UART3_CTS         IOMUX_PAD(0x374, 0xC8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__EPDC_SDCE7        IOMUX_PAD(0x374, 0xC8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MOSI__WEIM_D9           IOMUX_PAD(0x374, 0xC8, 7, 0x810, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_MISO__ECSPI1_MISO       IOMUX_PAD(0x378, 0xCC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__GPIO_4_14         IOMUX_PAD(0x378, 0xCC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__CSPI_SS2          IOMUX_PAD(0x378, 0xCC, 2, 0x6f0, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__ECSPI2_SS2        IOMUX_PAD(0x378, 0xCC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_MISO__UART4_RTS         IOMUX_PAD(0x378, 0xCC, 4, 0x7d8, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__EPDC_SDCE8        IOMUX_PAD(0x378, 0xCC, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_MISO__WEIM_D10          IOMUX_PAD(0x378, 0xCC, 7, 0x814, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI1_SS0__ECSPI1_SS0         IOMUX_PAD(0x37C, 0xD0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__GPIO_4_15          IOMUX_PAD(0x37C, 0xD0, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI1_SS0__CSPI_SS3           IOMUX_PAD(0x37C, 0xD0, 2, 0x6f4, 1, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__ECSPI2_SS3         IOMUX_PAD(0x37C, 0xD0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI1_SS0__UART4_CTS          IOMUX_PAD(0x37C, 0xD0, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__EPDC_SDCE9         IOMUX_PAD(0x37C, 0xD0, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI1_SS0__WEIM_D11           IOMUX_PAD(0x37C, 0xD0, 7, 0x818, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SCLK__ECSPI2_SCLK       IOMUX_PAD(0x380, 0xD4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__GPIO_4_16         IOMUX_PAD(0x380, 0xD4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_WR         IOMUX_PAD(0x380, 0xD4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ECSPI1_RDY        IOMUX_PAD(0x380, 0xD4, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__UART5_RTS         IOMUX_PAD(0x380, 0xD4, 4, 0x7e0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__ELCDIF_DOTCLK     IOMUX_PAD(0x380, 0xD4, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__NANDF_CEN4        IOMUX_PAD(0x380, 0xD4, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SCLK__WEIM_D8           IOMUX_PAD(0x380, 0xD4, 7, 0x80c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MOSI__ECSPI2_MOSI       IOMUX_PAD(0x384, 0xD8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__GPIO_4_17         IOMUX_PAD(0x384, 0xD8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_RD         IOMUX_PAD(0x384, 0xD8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ECSPI1_SS1        IOMUX_PAD(0x384, 0xD8, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MOSI__UART5_CTS         IOMUX_PAD(0x384, 0xD8, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__ELCDIF_EN         IOMUX_PAD(0x384, 0xD8, 5, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__NANDF_CEN5        IOMUX_PAD(0x384, 0xD8, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MOSI__WEIM_D9           IOMUX_PAD(0x384, 0xD8, 7, 0x810, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_MISO__ECSPI2_MISO       IOMUX_PAD(0x388, 0xDC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__GPIO_4_18         IOMUX_PAD(0x388, 0xDC, 1, 0x0, 0, PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_RS         IOMUX_PAD(0x388, 0xDC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ECSPI1_SS2        IOMUX_PAD(0x388, 0xDC, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_MISO__UART5_TXD         IOMUX_PAD(0x388, 0xDC, 4, 0x0, 0, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__ELCDIF_VSYNC      IOMUX_PAD(0x388, 0xDC, 5, 0x73c, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__NANDF_CEN6        IOMUX_PAD(0x388, 0xDC, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_MISO__WEIM_D10          IOMUX_PAD(0x388, 0xDC, 7, 0x814, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_ECSPI2_SS0__ECSPI2_SS0         IOMUX_PAD(0x38C, 0xE0, 0, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__GPIO_4_19          IOMUX_PAD(0x38C, 0xE0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_CS          IOMUX_PAD(0x38C, 0xE0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ECSPI1_SS3         IOMUX_PAD(0x38C, 0xE0, 3, 0x0, 0, MX50_CSPI_SS_PAD)
-#define MX50_PAD_ECSPI2_SS0__UART5_RXD          IOMUX_PAD(0x38C, 0xE0, 4, 0x7e4, 5, MX50_UART_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__ELCDIF_HSYNC       IOMUX_PAD(0x38C, 0xE0, 5, 0x6f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__NANDF_CEN7         IOMUX_PAD(0x38C, 0xE0, 6, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_ECSPI2_SS0__WEIM_D11           IOMUX_PAD(0x38C, 0xE0, 7, 0x818, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CLK__SD1_CLK       IOMUX_PAD(0x390, 0xE4, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__GPIO_5_0      IOMUX_PAD(0x390, 0xE4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CLK__CLKO          IOMUX_PAD(0x390, 0xE4, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_CMD__SD1_CMD       IOMUX_PAD(0x394, 0xE8, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__GPIO_5_1      IOMUX_PAD(0x394, 0xE8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_CMD__CLKO2         IOMUX_PAD(0x394, 0xE8, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D0__SD1_D0         IOMUX_PAD(0x398, 0xEC, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D0__GPIO_5_2       IOMUX_PAD(0x398, 0xEC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D0__PLL1_BYP       IOMUX_PAD(0x398, 0xEC, 7, 0x6dc, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D1__SD1_D1         IOMUX_PAD(0x39C, 0xF0, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D1__GPIO_5_3       IOMUX_PAD(0x39C, 0xF0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D1__PLL2_BYP       IOMUX_PAD(0x39C, 0xF0, 7, 0x6e0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D2__SD1_D2         IOMUX_PAD(0x3A0, 0xF4, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D2__GPIO_5_4       IOMUX_PAD(0x3A0, 0xF4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD1_D2__PLL3_BYP       IOMUX_PAD(0x3A0, 0xF4, 7, 0x6e4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD1_D3__SD1_D3         IOMUX_PAD(0x3A4, 0xF8, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD1_D3__GPIO_5_5       IOMUX_PAD(0x3A4, 0xF8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CLK__SD2_CLK       IOMUX_PAD(0x3A8, 0xFC, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__GPIO_5_6      IOMUX_PAD(0x3A8, 0xFC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CLK__MSHC_SCLK     IOMUX_PAD(0x3A8, 0xFC, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_CMD__SD2_CMD       IOMUX_PAD(0x3AC, 0x100, IOMUX_CONFIG_SION, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__GPIO_5_7      IOMUX_PAD(0x3AC, 0x100, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CMD__MSHC_BS       IOMUX_PAD(0x3AC, 0x100, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-
-#define MX50_PAD_SD2_D0__SD2_D0         IOMUX_PAD(0x3B0, 0x104, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__GPIO_5_8       IOMUX_PAD(0x3B0, 0x104, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D0__MSHC_D0        IOMUX_PAD(0x3B0, 0x104, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D0__KEY_COL4       IOMUX_PAD(0x3B0, 0x104, 3, 0x790, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D1__SD2_D1         IOMUX_PAD(0x3B4, 0x108, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__GPIO_5_9       IOMUX_PAD(0x3B4, 0x108, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D1__MSHC_D1        IOMUX_PAD(0x3B4, 0x108, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D1__KEY_ROW4       IOMUX_PAD(0x3B4, 0x108, 3, 0x7a0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D2__SD2_D2         IOMUX_PAD(0x3B8, 0x10C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__GPIO_5_10      IOMUX_PAD(0x3B8, 0x10C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D2__MSHC_D2        IOMUX_PAD(0x3B8, 0x10C, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D2__KEY_COL5       IOMUX_PAD(0x3B8, 0x10C, 3, 0x794, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D3__SD2_D3         IOMUX_PAD(0x3BC, 0x110, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__GPIO_5_11      IOMUX_PAD(0x3BC, 0x110, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D3__MSHC_D3        IOMUX_PAD(0x3BC, 0x110, 2, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D3__KEY_ROW5       IOMUX_PAD(0x3BC, 0x110, 3, 0x7a4, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D4__SD2_D4         IOMUX_PAD(0x3C0, 0x114, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D4__GPIO_5_12      IOMUX_PAD(0x3C0, 0x114, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__AUD4_RXFS      IOMUX_PAD(0x3C0, 0x114, 2, 0x6d0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__KEY_COL6       IOMUX_PAD(0x3C0, 0x114, 3, 0x798, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__WEIM_D0        IOMUX_PAD(0x3C0, 0x114, 4, 0x7ec, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D4__CCM_OUT0       IOMUX_PAD(0x3C0, 0x114, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D5__SD2_D5         IOMUX_PAD(0x3C4, 0x118, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D5__GPIO_5_13      IOMUX_PAD(0x3C4, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__AUD4_RXC       IOMUX_PAD(0x3C4, 0x118, 2, 0x6cc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__KEY_ROW6       IOMUX_PAD(0x3C4, 0x118, 3, 0x7a8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__WEIM_D1        IOMUX_PAD(0x3C4, 0x118, 4, 0x7f0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D5__CCM_OUT1       IOMUX_PAD(0x3C4, 0x118, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D6__SD2_D6         IOMUX_PAD(0x3C8, 0x11C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D6__GPIO_5_14      IOMUX_PAD(0x3C8, 0x11C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__AUD4_RXD       IOMUX_PAD(0x3C8, 0x11C, 2, 0x6c4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__KEY_COL7       IOMUX_PAD(0x3C8, 0x11C, 3, 0x79c, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__WEIM_D2        IOMUX_PAD(0x3C8, 0x11C, 4, 0x7f4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D6__CCM_OUT2       IOMUX_PAD(0x3C8, 0x11C, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_D7__SD2_D7         IOMUX_PAD(0x3CC, 0x120, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_D7__GPIO_5_15      IOMUX_PAD(0x3CC, 0x120, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__AUD4_TXFS      IOMUX_PAD(0x3CC, 0x120, 2, 0x6d8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__KEY_ROW7       IOMUX_PAD(0x3CC, 0x120, 3, 0x7ac, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__WEIM_D3        IOMUX_PAD(0x3CC, 0x120, 4, 0x7f8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_D7__CCM_STOP       IOMUX_PAD(0x3CC, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_WP__SD2_WP         IOMUX_PAD(0x3D0, 0x124, 0, 0x744, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_WP__GPIO_5_16      IOMUX_PAD(0x3D0, 0x124, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__AUD4_TXD       IOMUX_PAD(0x3D0, 0x124, 2, 0x6c8, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__WEIM_D4        IOMUX_PAD(0x3D0, 0x124, 4, 0x7fc, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_WP__CCM_WAIT       IOMUX_PAD(0x3D0, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD2_CD__SD2_CD         IOMUX_PAD(0x3D4, 0x128, 0, 0x740, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD2_CD__GPIO_5_17      IOMUX_PAD(0x3D4, 0x128, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__AUD4_TXC       IOMUX_PAD(0x3D4, 0x128, 2, 0x6d4, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__WEIM_D5        IOMUX_PAD(0x3D4, 0x128, 4, 0x800, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD2_CD__CCM_REF_EN     IOMUX_PAD(0x3D4, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_ON_REQ__PMIC_ON_REQ       IOMUX_PAD(0x3D8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_STBY_REQ__PMIC_STBY_REQ   IOMUX_PAD(0x3DC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_PORT_B__PMIC_PORT_B       IOMUX_PAD(0x3E0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE1__PMIC_BOOT_MODE1       IOMUX_PAD(0x3E4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_RESET_IN_B__PMIC_RESET_IN_B       IOMUX_PAD(0x3E8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_BOOT_MODE0__PMIC_BOOT_MODE0       IOMUX_PAD(0x3EC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_TEST_MODE__PMIC_TEST_MODE IOMUX_PAD(0x3F0, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TMS__PMIC_JTAG_TMS   IOMUX_PAD(0x3F4, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_MOD__PMIC_JTAG_MOD   IOMUX_PAD(0x3F8, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TRSTB__PMIC_JTAG_TRSTB       IOMUX_PAD(0x3FC, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDI__PMIC_JTAG_TDI   IOMUX_PAD(0x400, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TCK__PMIC_JTAG_TCK   IOMUX_PAD(0x404, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_PMIC_JTAG_TDO__PMIC_JTAG_TDO   IOMUX_PAD(0x408, 0, 0, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D0__DISP_D0       IOMUX_PAD(0x40C, 0x12C, 0, 0x6fc, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D0__GPIO_2_0      IOMUX_PAD(0x40C, 0x12C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D0__FEC_TXCLK     IOMUX_PAD(0x40C, 0x12C, 2, 0x78c, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-
-#define MX50_PAD_DISP_D1__DISP_D1       IOMUX_PAD(0x410, 0x130, 0, 0x700, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D1__GPIO_2_1      IOMUX_PAD(0x410, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D1__FEC_RX_ER     IOMUX_PAD(0x410, 0x130, 2, 0x788, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D1__WEIM_A17      IOMUX_PAD(0x410, 0x130, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D2__DISP_D2       IOMUX_PAD(0x414, 0x134, 0, 0x704, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D2__GPIO_2_2      IOMUX_PAD(0x414, 0x134, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D2__FEC_RX_DV     IOMUX_PAD(0x414, 0x134, 2, 0x784, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D2__WEIM_A18      IOMUX_PAD(0x414, 0x134, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D3__DISP_D3       IOMUX_PAD(0x418, 0x138, 0, 0x708, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D3__GPIO_2_3      IOMUX_PAD(0x418, 0x138, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_RXD1      IOMUX_PAD(0x418, 0x138, 2, 0x77C, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D3__WEIM_A19      IOMUX_PAD(0x418, 0x138, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D3__FEC_COL       IOMUX_PAD(0x418, 0x138, 4, 0x770, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D4__DISP_D4       IOMUX_PAD(0x41C, 0x13C, 0, 0x70c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D4__GPIO_2_4      IOMUX_PAD(0x41C, 0x13C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D4__FEC_RXD0      IOMUX_PAD(0x41C, 0x13C, 2, 0x778, 0, PAD_CTL_HYS | PAD_CTL_PKE)
-#define MX50_PAD_DISP_D4__WEIM_A20      IOMUX_PAD(0x41C, 0x13C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D5__DISP_D5       IOMUX_PAD(0x420, 0x140, 0, 0x710, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D5__GPIO_2_5      IOMUX_PAD(0x420, 0x140, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D5__FEC_TX_EN     IOMUX_PAD(0x420, 0x140, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D5__WEIM_A21      IOMUX_PAD(0x420, 0x140, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D6__DISP_D6       IOMUX_PAD(0x424, 0x144, 0, 0x714, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D6__GPIO_2_6      IOMUX_PAD(0x424, 0x144, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_TXD1      IOMUX_PAD(0x424, 0x144, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D6__WEIM_A22      IOMUX_PAD(0x424, 0x144, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D6__FEC_RX_CLK    IOMUX_PAD(0x424, 0x144, 4, 0x780, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D7__DISP_D7       IOMUX_PAD(0x428, 0x148, 0, 0x718, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D7__GPIO_2_7      IOMUX_PAD(0x428, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D7__FEC_TXD0      IOMUX_PAD(0x428, 0x148, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_DISP_D7__WEIM_A23      IOMUX_PAD(0x428, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
-
-
-#define MX50_PAD_DISP_WR__ELCDIF_WR     IOMUX_PAD(0x42C, 0x14C, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__GPIO_2_16     IOMUX_PAD(0x42C, 0x14C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_WR__ELCDIF_PIXCLK IOMUX_PAD(0x42C, 0x14C, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_WR__WEIM_A24      IOMUX_PAD(0x42C, 0x14C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RD__ELCDIF_RD     IOMUX_PAD(0x430, 0x150, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__GPIO_2_19     IOMUX_PAD(0x430, 0x150, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RD__ELCDIF_EN     IOMUX_PAD(0x430, 0x150, 2, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RD__WEIM_A25      IOMUX_PAD(0x430, 0x150, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RS__ELCDIF_RS     IOMUX_PAD(0x434, 0x154, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__GPIO_2_17     IOMUX_PAD(0x434, 0x154, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RS__ELCDIF_VSYNC  IOMUX_PAD(0x434, 0x154, 2, 0x73c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RS__WEIM_A26      IOMUX_PAD(0x434, 0x154, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_CS__ELCDIF_CS     IOMUX_PAD(0x438, 0x158, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__GPIO_2_21     IOMUX_PAD(0x438, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__ELCDIF_HSYNC  IOMUX_PAD(0x438, 0x158, 2, 0x6f8, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_A27      IOMUX_PAD(0x438, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_CS__WEIM_CS3      IOMUX_PAD(0x438, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_BUSY__ELCDIF_HSYNC        IOMUX_PAD(0x43C, 0x15C, 0, 0x6f8, 2, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__GPIO_2_18           IOMUX_PAD(0x43C, 0x15C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_BUSY__WEIM_CS3            IOMUX_PAD(0x43C, 0x15C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_RESET__ELCDIF_RST IOMUX_PAD(0x440, 0x160, 0, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__GPIO_2_20  IOMUX_PAD(0x440, 0x160, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_RESET__WEIM_CS3   IOMUX_PAD(0x440, 0x160, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CMD__SD3_CMD       IOMUX_PAD(0x444, 0x164, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CMD__GPIO_5_18     IOMUX_PAD(0x444, 0x164, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CMD__NANDF_WRN     IOMUX_PAD(0x444, 0x164, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CMD__SSP_CMD       IOMUX_PAD(0x444, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_CLK__SD3_CLK       IOMUX_PAD(0x448, 0x168, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_CLK__GPIO_5_19     IOMUX_PAD(0x448, 0x168, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_CLK__NANDF_RDN     IOMUX_PAD(0x448, 0x168, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_CLK__SSP_CLK       IOMUX_PAD(0x448, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D0__SD3_D0         IOMUX_PAD(0x44C, 0x16C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D0__GPIO_5_20      IOMUX_PAD(0x44C, 0x16C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D0__NANDF_D4       IOMUX_PAD(0x44C, 0x16C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D0__SSP_D0         IOMUX_PAD(0x44C, 0x16C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D0__PLL1_BYP       IOMUX_PAD(0x44C, 0x16C, 7, 0x6dc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D1__SD3_D1         IOMUX_PAD(0x450, 0x170, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D1__GPIO_5_21      IOMUX_PAD(0x450, 0x170, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D1__NANDF_D5       IOMUX_PAD(0x450, 0x170, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D1__PLL2_BYP       IOMUX_PAD(0x450, 0x170, 7, 0x6e0, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D2__SD3_D2         IOMUX_PAD(0x454, 0x174, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D2__GPIO_5_22      IOMUX_PAD(0x454, 0x174, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D2__NANDF_D6       IOMUX_PAD(0x454, 0x174, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D2__SSP_D2         IOMUX_PAD(0x454, 0x174, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_D2__PLL3_BYP       IOMUX_PAD(0x454, 0x174, 7, 0x6e4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D3__SD3_D3         IOMUX_PAD(0x458, 0x178, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D3__GPIO_5_23      IOMUX_PAD(0x458, 0x178, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D3__NANDF_D7       IOMUX_PAD(0x458, 0x178, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D3__SSP_D3         IOMUX_PAD(0x458, 0x178, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D4__SD3_D4         IOMUX_PAD(0x45C, 0x17C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D4__GPIO_5_24      IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D4__NANDF_D0       IOMUX_PAD(0x45C, 0x17C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D4__SSP_D4         IOMUX_PAD(0x45C, 0x17C, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D5__SD3_D5         IOMUX_PAD(0x460, 0x180, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D5__GPIO_5_25      IOMUX_PAD(0x460, 0x180, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D5__NANDF_D1       IOMUX_PAD(0x460, 0x180, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D5__SSP_D5         IOMUX_PAD(0x460, 0x180, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D6__SD3_D6         IOMUX_PAD(0x464, 0x184, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D6__GPIO_5_26      IOMUX_PAD(0x464, 0x184, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D6__NANDF_D2       IOMUX_PAD(0x464, 0x184, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D6__SSP_D6         IOMUX_PAD(0x464, 0x184, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_D7__SD3_D7         IOMUX_PAD(0x468, 0x188, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_D7__GPIO_5_27      IOMUX_PAD(0x468, 0x188, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_D7__NANDF_D3       IOMUX_PAD(0x468, 0x188, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_D7__SSP_D7         IOMUX_PAD(0x468, 0x188, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_SD3_WP__SD3_WP         IOMUX_PAD(0x46C, 0x18C, 0, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__GPIO_5_28      IOMUX_PAD(0x46C, 0x18C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_SD3_WP__NANDF_RESETN   IOMUX_PAD(0x46C, 0x18C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_SD3_WP__SSP_CD         IOMUX_PAD(0x46C, 0x18C, 3, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_SD3_WP__SD4_LCTL       IOMUX_PAD(0x46C, 0x18C, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_SD3_WP__WEIM_CS3       IOMUX_PAD(0x46C, 0x18C, 5, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D8__DISP_D8       IOMUX_PAD(0x470, 0x190, 0, 0x71c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D8__GPIO_2_8      IOMUX_PAD(0x470, 0x190, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__NANDF_CLE     IOMUX_PAD(0x470, 0x190, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD1_LCTL      IOMUX_PAD(0x470, 0x190, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__SD4_CMD       IOMUX_PAD(0x470, 0x190, 4, 0x74c, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D8__KEY_COL4      IOMUX_PAD(0x470, 0x190, 5, 0x790, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D8__FEC_TX_CLK    IOMUX_PAD(0x470, 0x190, 6, 0x78c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D9__DISP_D9       IOMUX_PAD(0x474, 0x194, 0, 0x720, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D9__GPIO_2_9      IOMUX_PAD(0x474, 0x194, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__NANDF_ALE     IOMUX_PAD(0x474, 0x194, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD2_LCTL      IOMUX_PAD(0x474, 0x194, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__SD4_CLK       IOMUX_PAD(0x474, 0x194, 4, 0x748, 2, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D9__KEY_ROW4      IOMUX_PAD(0x474, 0x194, 5, 0x7a0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D9__FEC_RX_ER     IOMUX_PAD(0x474, 0x194, 6, 0x788, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D10__DISP_D10     IOMUX_PAD(0x478, 0x198, 0, 0x724, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D10__GPIO_2_10    IOMUX_PAD(0x478, 0x198, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__NANDF_CEN0   IOMUX_PAD(0x478, 0x198, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD3_LCTL     IOMUX_PAD(0x478, 0x198, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__SD4_D0       IOMUX_PAD(0x478, 0x198, 4, 0x750, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D10__KEY_COL5     IOMUX_PAD(0x478, 0x198, 5, 0x794, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D10__FEC_RX_DV    IOMUX_PAD(0x478, 0x198, 6, 0x784, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D11__DISP_D11     IOMUX_PAD(0x47C, 0x19C, 0, 0x728, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D11__GPIO_2_11    IOMUX_PAD(0x47C, 0x19C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__NANDF_CEN1   IOMUX_PAD(0x47C, 0x19C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__SD4_D1       IOMUX_PAD(0x47C, 0x19C, 4, 0x754, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D11__KEY_ROW5     IOMUX_PAD(0x47C, 0x19C, 5, 0x7a4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D11__FEC_RDAT1    IOMUX_PAD(0x47C, 0x19C, 6, 0x77c, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D12__DISP_D12     IOMUX_PAD(0x480, 0x1A0, 0, 0x72c, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D12__GPIO_2_12    IOMUX_PAD(0x480, 0x1A0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__NANDF_CEN2   IOMUX_PAD(0x480, 0x1A0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD1_CD       IOMUX_PAD(0x480, 0x1A0, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__SD4_D2       IOMUX_PAD(0x480, 0x1A0, 4, 0x758, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D12__KEY_COL6     IOMUX_PAD(0x480, 0x1A0, 5, 0x798, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D12__FEC_RDAT0    IOMUX_PAD(0x480, 0x1A0, 6, 0x778, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D13__DISP_D13     IOMUX_PAD(0x484, 0x1A4, 0, 0x730, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D13__GPIO_2_13    IOMUX_PAD(0x484, 0x1A4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__NANDF_CEN3   IOMUX_PAD(0x484, 0x1A4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD3_CD       IOMUX_PAD(0x484, 0x1A4, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__SD4_D3       IOMUX_PAD(0x484, 0x1A4, 4, 0x75c, 1, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D13__KEY_ROW6     IOMUX_PAD(0x484, 0x1A4, 5, 0x7a8, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D13__FEC_TX_EN    IOMUX_PAD(0x484, 0x1A4, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D14__DISP_D14     IOMUX_PAD(0x488, 0x1A8, 0, 0x734, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D14__GPIO_2_14    IOMUX_PAD(0x488, 0x1A8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__NANDF_RDY0   IOMUX_PAD(0x488, 0x1A8, 2, 0x7b4, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD1_WP       IOMUX_PAD(0x488, 0x1A8, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__SD4_WP       IOMUX_PAD(0x488, 0x1A8, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D14__KEY_COL7     IOMUX_PAD(0x488, 0x1A8, 5, 0x79c, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D14__FEC_TDAT1    IOMUX_PAD(0x488, 0x1A8, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_DISP_D15__DISP_D15     IOMUX_PAD(0x48C, 0x1AC, 0, 0x738, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_DISP_D15__GPIO_2_15    IOMUX_PAD(0x48C, 0x1AC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__NANDF_DQS    IOMUX_PAD(0x48C, 0x1AC, 2, 0x7b0, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD3_RST      IOMUX_PAD(0x48C, 0x1AC, 3, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__SD4_CD       IOMUX_PAD(0x48C, 0x1AC, 4, 0x0, 0, MX50_SD_PAD_CTRL)
-#define MX50_PAD_DISP_D15__KEY_ROW7     IOMUX_PAD(0x48C, 0x1AC, 5, 0x7ac, 1, NO_PAD_CTRL)
-#define MX50_PAD_DISP_D15__FEC_TDAT0    IOMUX_PAD(0x48C, 0x1AC, 6, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D0__EPDC_D0       IOMUX_PAD(0x54C, 0x1B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__GPIO_3_0      IOMUX_PAD(0x54C, 0x1B0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__WEIM_D0       IOMUX_PAD(0x54C, 0x1B0, 2, 0x7ec, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_RS     IOMUX_PAD(0x54C, 0x1B0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D0__ELCDIF_PIXCLK IOMUX_PAD(0x54C, 0x1B0, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D1__EPDC_D1       IOMUX_PAD(0x550, 0x1B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__GPIO_3_1      IOMUX_PAD(0x550, 0x1B4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__WEIM_D1       IOMUX_PAD(0x550, 0x1B4, 2, 0x7f0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_CS     IOMUX_PAD(0x550, 0x1B4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D1__ELCDIF_EN     IOMUX_PAD(0x550, 0x1B4, 4, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D2__EPDC_D2       IOMUX_PAD(0x554, 0x1B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__GPIO_3_2      IOMUX_PAD(0x554, 0x1B8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__WEIM_D2       IOMUX_PAD(0x554, 0x1B8, 2, 0x7f4, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_WR     IOMUX_PAD(0x554, 0x1B8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D2__ELCDIF_VSYNC  IOMUX_PAD(0x554, 0x1B8, 4, 0x73c, 2, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D3__EPDC_D3       IOMUX_PAD(0x558, 0x1BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__GPIO_3_3      IOMUX_PAD(0x558, 0x1BC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__WEIM_D3       IOMUX_PAD(0x558, 0x1BC, 2, 0x7f8, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_RD     IOMUX_PAD(0x558, 0x1BC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D3__ELCDIF_HSYNC  IOMUX_PAD(0x558, 0x1BC, 4, 0x6f8, 3, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D4__EPDC_D4       IOMUX_PAD(0x55C, 0x1C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__GPIO_3_4      IOMUX_PAD(0x55C, 0x1C0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D4__WEIM_D4       IOMUX_PAD(0x55C, 0x1C0, 2, 0x7fc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D5__EPDC_D5       IOMUX_PAD(0x560, 0x1C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__GPIO_3_5      IOMUX_PAD(0x560, 0x1C4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D5__WEIM_D5       IOMUX_PAD(0x560, 0x1C4, 2, 0x800, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D6__EPDC_D6       IOMUX_PAD(0x564, 0x1C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__GPIO_3_6      IOMUX_PAD(0x564, 0x1C8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D6__WEIM_D6       IOMUX_PAD(0x564, 0x1C8, 2, 0x804, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D7__EPDC_D7       IOMUX_PAD(0x568, 0x1CC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__GPIO_3_7      IOMUX_PAD(0x568, 0x1CC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D7__WEIM_D7       IOMUX_PAD(0x568, 0x1CC, 2, 0x808, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D8__EPDC_D8       IOMUX_PAD(0x56C, 0x1D0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__GPIO_3_8      IOMUX_PAD(0x56C, 0x1D0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__WEIM_D8       IOMUX_PAD(0x56C, 0x1D0, 2, 0x80c, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D8__ELCDIF_D24    IOMUX_PAD(0x56C, 0x1D0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D9__EPDC_D9       IOMUX_PAD(0x570, 0x1D4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__GPIO_3_9      IOMUX_PAD(0x570, 0x1D4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__WEIM_D9       IOMUX_PAD(0x570, 0x1D4, 2, 0x810, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D9__ELCDIF_D25    IOMUX_PAD(0x570, 0x1D4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D10__EPDC_D10     IOMUX_PAD(0x574, 0x1D8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__GPIO_3_10    IOMUX_PAD(0x574, 0x1D8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__WEIM_D10     IOMUX_PAD(0x574, 0x1D8, 2, 0x814, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D10__ELCDIF_D26   IOMUX_PAD(0x574, 0x1D8, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D11__EPDC_D11     IOMUX_PAD(0x578, 0x1DC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__GPIO_3_11    IOMUX_PAD(0x578, 0x1DC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__WEIM_D11     IOMUX_PAD(0x578, 0x1DC, 2, 0x818, 2, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D11__ELCDIF_D27   IOMUX_PAD(0x578, 0x1DC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D12__EPDC_D12     IOMUX_PAD(0x57C, 0x1E0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__GPIO_3_12    IOMUX_PAD(0x57C, 0x1E0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__WEIM_D12     IOMUX_PAD(0x57C, 0x1E0, 2, 0x81c, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D12__ELCDIF_D28   IOMUX_PAD(0x57C, 0x1E0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D13__EPDC_D13     IOMUX_PAD(0x580, 0x1E4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__GPIO_3_13    IOMUX_PAD(0x580, 0x1E4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__WEIM_D13     IOMUX_PAD(0x580, 0x1E4, 2, 0x820, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D13__ELCDIF_D29   IOMUX_PAD(0x580, 0x1E4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D14__EPDC_D14     IOMUX_PAD(0x584, 0x1E8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__GPIO_3_14    IOMUX_PAD(0x584, 0x1E8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__WEIM_D14     IOMUX_PAD(0x584, 0x1E8, 2, 0x824, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__ELCDIF_D30   IOMUX_PAD(0x584, 0x1E8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D14__AUD6_TXD     IOMUX_PAD(0x584, 0x1E8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_D15__EPDC_D15     IOMUX_PAD(0x588, 0x1EC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__GPIO_3_15    IOMUX_PAD(0x588, 0x1EC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__WEIM_D15     IOMUX_PAD(0x588, 0x1EC, 2, 0x828, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__ELCDIF_D31   IOMUX_PAD(0x588, 0x1EC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_D15__AUD6_TXC     IOMUX_PAD(0x588, 0x1EC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDCLK__EPDC_GDCLK IOMUX_PAD(0x58C, 0x1F0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__GPIO_3_16  IOMUX_PAD(0x58C, 0x1F0, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__WEIM_D16   IOMUX_PAD(0x58C, 0x1F0, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__ELCDIF_D16 IOMUX_PAD(0x58C, 0x1F0, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDCLK__AUD6_TXFS  IOMUX_PAD(0x58C, 0x1F0, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDSP__EPDC_GDSP   IOMUX_PAD(0x590, 0x1F4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__GPIO_3_17   IOMUX_PAD(0x590, 0x1F4, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__WEIM_D17    IOMUX_PAD(0x590, 0x1F4, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__ELCDIF_D17  IOMUX_PAD(0x590, 0x1F4, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDSP__AUD6_RXD    IOMUX_PAD(0x590, 0x1F4, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDOE__EPDC_GDOE   IOMUX_PAD(0x594, 0x1F8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__GPIO_3_18   IOMUX_PAD(0x594, 0x1F8, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__WEIM_D18    IOMUX_PAD(0x594, 0x1F8, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__ELCDIF_D18  IOMUX_PAD(0x594, 0x1F8, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDOE__AUD6_RXC    IOMUX_PAD(0x594, 0x1F8, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_GDRL__EPDC_GDRL   IOMUX_PAD(0x598, 0x1FC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__GPIO_3_19   IOMUX_PAD(0x598, 0x1FC, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__WEIM_D19    IOMUX_PAD(0x598, 0x1FC, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__ELCDIF_D19  IOMUX_PAD(0x598, 0x1FC, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_GDRL__AUD6_RXFS   IOMUX_PAD(0x598, 0x1FC, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLK__EPDC_SDCLK IOMUX_PAD(0x59C, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__GPIO_3_20  IOMUX_PAD(0x59C, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__WEIM_D20   IOMUX_PAD(0x59C, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__ELCDIF_D20 IOMUX_PAD(0x59C, 0x200, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLK__AUD5_TXD   IOMUX_PAD(0x59C, 0x200, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOEZ__EPDC_SDOEZ IOMUX_PAD(0x5A0, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__GPIO_3_21  IOMUX_PAD(0x5A0, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__WEIM_D21   IOMUX_PAD(0x5A0, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__ELCDIF_D21 IOMUX_PAD(0x5A0, 0x204, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOEZ__AUD5_TXC   IOMUX_PAD(0x5A0, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOED__EPDC_SDOED IOMUX_PAD(0x5A4, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__GPIO_3_22  IOMUX_PAD(0x5A4, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__WEIM_D22   IOMUX_PAD(0x5A4, 0x208, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__ELCDIF_D22 IOMUX_PAD(0x5A4, 0x208, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOED__AUD5_TXFS  IOMUX_PAD(0x5A4, 0x208, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDOE__EPDC_SDOE   IOMUX_PAD(0x5A8, 0x20C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__GPIO_3_23   IOMUX_PAD(0x5A8, 0x20C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__WEIM_D23    IOMUX_PAD(0x5A8, 0x20C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__ELCDIF_D23  IOMUX_PAD(0x5A8, 0x20C, 3, 0x0, 0, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDOE__AUD5_RXD    IOMUX_PAD(0x5A8, 0x20C, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDLE__EPDC_SDLE   IOMUX_PAD(0x5AC, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__GPIO_3_24   IOMUX_PAD(0x5AC, 0x210, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__WEIM_D24    IOMUX_PAD(0x5AC, 0x210, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__ELCDIF_D8   IOMUX_PAD(0x5AC, 0x210, 3, 0x71c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDLE__AUD5_RXC    IOMUX_PAD(0x5AC, 0x210, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCLKN__EPDC_SDCLKN       IOMUX_PAD(0x5B0, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__GPIO_3_25         IOMUX_PAD(0x5B0, 0x214, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__WEIM_D25          IOMUX_PAD(0x5B0, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__ELCDIF_D9         IOMUX_PAD(0x5B0, 0x214, 3, 0x720, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCLKN__AUD5_RXFS         IOMUX_PAD(0x5B0, 0x214, 4, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDSHR__EPDC_SDSHR IOMUX_PAD(0x5B4, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__GPIO_3_26  IOMUX_PAD(0x5B4, 0x218, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__WEIM_D26   IOMUX_PAD(0x5B4, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__ELCDIF_D10 IOMUX_PAD(0x5B4, 0x218, 3, 0x724, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_SDSHR__AUD4_TXD   IOMUX_PAD(0x5B4, 0x218, 4, 0x6c8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCOM__EPDC_PWRCOM       IOMUX_PAD(0x5B8, 0x21C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__GPIO_3_27         IOMUX_PAD(0x5B8, 0x21C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__WEIM_D27          IOMUX_PAD(0x5B8, 0x21C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__ELCDIF_D11        IOMUX_PAD(0x5B8, 0x21C, 3, 0x728, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCOM__AUD4_TXC          IOMUX_PAD(0x5B8, 0x21C, 4, 0x6d4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRSTAT__EPDC_PWRSTAT     IOMUX_PAD(0x5BC, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__GPIO_3_28        IOMUX_PAD(0x5BC, 0x220, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__WEIM_D28         IOMUX_PAD(0x5BC, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__ELCDIF_D12       IOMUX_PAD(0x5BC, 0x220, 3, 0x72c, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRSTAT__AUD4_TXFS        IOMUX_PAD(0x5BC, 0x220, 4, 0x6d8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL0__EPDC_PWRCTRL0   IOMUX_PAD(0x5C0, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__GPIO_3_29       IOMUX_PAD(0x5C0, 0x224, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__WEIM_D29        IOMUX_PAD(0x5C0, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__ELCDIF_D13      IOMUX_PAD(0x5C0, 0x224, 3, 0x730, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL0__AUD4_RXD        IOMUX_PAD(0x5C0, 0x224, 4, 0x6c4, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL1__EPDC_PWRCTRL1   IOMUX_PAD(0x5C4, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__GPIO_3_30       IOMUX_PAD(0x5C4, 0x228, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__WEIM_D30        IOMUX_PAD(0x5C4, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__ELCDIF_D14      IOMUX_PAD(0x5C4, 0x228, 3, 0x734, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL1__AUD4_RXC        IOMUX_PAD(0x5C4, 0x228, 4, 0x6cc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL2__EPDC_PWRCTRL2   IOMUX_PAD(0x5C8, 0x22C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__GPIO_3_31       IOMUX_PAD(0x5C8, 0x22C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__WEIM_D31        IOMUX_PAD(0x5C8, 0x22C, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__ELCDIF_D15      IOMUX_PAD(0x5C8, 0x22C, 3, 0x738, 1, MX50_ELCDIF_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__AUD4_RXFS       IOMUX_PAD(0x5C8, 0x22C, 4, 0x6d0, 1, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL2__SDMA_EXT0       IOMUX_PAD(0x5C8, 0x22C, 6, 0x7b8, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_PWRCTRL3__PWRCTRL3        IOMUX_PAD(0x5CC, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__GPIO_4_20       IOMUX_PAD(0x5CC, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__WEIM_EB2        IOMUX_PAD(0x5CC, 0x230, 2, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_PWRCTRL3__SDMA_EXT1       IOMUX_PAD(0x5CC, 0x230, 6, 0x7bc, 1, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM0__EPDC_VCOM0 IOMUX_PAD(0x5D0, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__GPIO_4_21  IOMUX_PAD(0x5D0, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM0__WEIM_EB3   IOMUX_PAD(0x5D0, 0x234, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_VCOM1__EPDC_VCOM1 IOMUX_PAD(0x5D4, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__GPIO_4_22  IOMUX_PAD(0x5D4, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_VCOM1__WEIM_CS3   IOMUX_PAD(0x5D4, 0x238, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR0__EPDC_BDR0   IOMUX_PAD(0x5D8, 0x23C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__GPIO_4_23   IOMUX_PAD(0x5D8, 0x23C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR0__ELCDIF_D7   IOMUX_PAD(0x5D8, 0x23C, 3, 0x718, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_BDR1__EPDC_BDR1   IOMUX_PAD(0x5DC, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__GPIO_4_24   IOMUX_PAD(0x5DC, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_BDR1__ELCDIF_D6   IOMUX_PAD(0x5DC, 0x240, 3, 0x714, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE0__EPDC_SDCE0 IOMUX_PAD(0x5E0, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__GPIO_4_25  IOMUX_PAD(0x5E0, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE0__ELCDIF_D5  IOMUX_PAD(0x5E0, 0x244, 3, 0x710, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE1__EPDC_SDCE1 IOMUX_PAD(0x5E4, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__GPIO_4_26  IOMUX_PAD(0x5E4, 0x248, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE1__ELCDIF_D4  IOMUX_PAD(0x5E4, 0x248, 2, 0x70c, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE2__EPDC_SDCE2         IOMUX_PAD(0x5E8, 0x24C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__GPIO_4_27          IOMUX_PAD(0x5E8, 0x24C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE2__ELCDIF_DAT3        IOMUX_PAD(0x5E8, 0x24C, 3, 0x708, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE3__EPDC_SDCE3 IOMUX_PAD(0x5EC, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__GPIO_4_28  IOMUX_PAD(0x5EC, 0x250, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE3__ELCDIF_D2  IOMUX_PAD(0x5EC, 0x250, 3, 0x704, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE4__EPDC_SDCE4 IOMUX_PAD(0x5F0, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__GPIO_4_29  IOMUX_PAD(0x5F0, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE4__ELCDIF_D1  IOMUX_PAD(0x5F0, 0x254, 3, 0x700, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EPDC_SDCE5__EPDC_SDCE5 IOMUX_PAD(0x5F4, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__GPIO_4_30  IOMUX_PAD(0x5F4, 0x258, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EPDC_SDCE5__ELCDIF_D0  IOMUX_PAD(0x5F4, 0x258, 3, 0x6fc, 1, MX50_ELCDIF_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA0__WEIM_A0       IOMUX_PAD(0x5F8, 0x25C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__GPIO_1_0      IOMUX_PAD(0x5F8, 0x25C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA0__KEY_COL4      IOMUX_PAD(0x5f8, 0x25C, 3, 0x790, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA1__WEIM_A1       IOMUX_PAD(0x5FC, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__GPIO_1_1      IOMUX_PAD(0x5FC, 0x260, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA1__KEY_ROW4      IOMUX_PAD(0x5fc, 0x260, 3, 0x7a0, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA2__WEIM_A2       IOMUX_PAD(0x600, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__GPIO_1_2      IOMUX_PAD(0x600, 0x264, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA2__KEY_COL5      IOMUX_PAD(0x600, 0x264, 3, 0x794, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA3__WEIM_A3       IOMUX_PAD(0x604, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__GPIO_1_3      IOMUX_PAD(0x604, 0x268, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA3__KEY_ROW5      IOMUX_PAD(0x604, 0x268, 3, 0x7a4, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA4__WEIM_A4       IOMUX_PAD(0x608, 0x26C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__GPIO_1_4      IOMUX_PAD(0x608, 0x26C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA4__KEY_COL6      IOMUX_PAD(0x608, 0x26C, 3, 0x798, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA5__WEIM_A5       IOMUX_PAD(0x60C, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__GPIO_1_5      IOMUX_PAD(0x60C, 0x270, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA5__KEY_ROW6      IOMUX_PAD(0x60C, 0x270, 3, 0x7a8, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA6__WEIM_A6       IOMUX_PAD(0x610, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__GPIO_1_6      IOMUX_PAD(0x610, 0x274, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA6__KEY_COL7      IOMUX_PAD(0x610, 0x274, 3, 0x79c, 2, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA7__WEIM_A7       IOMUX_PAD(0x614, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__GPIO_1_7      IOMUX_PAD(0x614, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA7__KEY_ROW7      IOMUX_PAD(0x614, 0x278, 3, 0x7ac, 2, MX50_KEYPAD_CTRL)
-
-#define MX50_PAD_EIM_DA8__WEIM_A8       IOMUX_PAD(0x618, 0x27C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA8__GPIO_1_8      IOMUX_PAD(0x618, 0x27C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA8__NANDF_CLE     IOMUX_PAD(0x618, 0x27C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA9__WEIM_A9       IOMUX_PAD(0x61C, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA9__GPIO_1_9      IOMUX_PAD(0x61C, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA9__NANDF_ALE     IOMUX_PAD(0x61C, 0x280, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA10__WEIM_A10     IOMUX_PAD(0x620, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA10__GPIO_1_10    IOMUX_PAD(0x620, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA10__NANDF_CE0    IOMUX_PAD(0x620, 0x284, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA11__WEIM_A11     IOMUX_PAD(0x624, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA11__GPIO_1_11    IOMUX_PAD(0x624, 0x288, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA11__NANDF_CE1    IOMUX_PAD(0x624, 0x288, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-
-#define MX50_PAD_EIM_DA12__WEIM_A12     IOMUX_PAD(0x628, 0x28C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA12__GPIO_1_12    IOMUX_PAD(0x628, 0x28C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA12__NANDF_CE2    IOMUX_PAD(0x628, 0x28C, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA12__EPDC_SDCE6   IOMUX_PAD(0x628, 0x28C, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA13__WEIM_A13     IOMUX_PAD(0x62C, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA13__GPIO_1_13    IOMUX_PAD(0x62C, 0x290, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA13__NANDF_CE3    IOMUX_PAD(0x62C, 0x290, 2, 0x0, 0, PAD_CTL_DSE_HIGH)
-#define MX50_PIN_EIM_DA13__EPDC_SDCE7   IOMUX_PAD(0x62C, 0x290, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA14__WEIM_A14     IOMUX_PAD(0x630, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__GPIO_1_14    IOMUX_PAD(0x630, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA14__NANDF_READY  IOMUX_PAD(0x630, 0x294, 2, 0x7B4, 2, PAD_CTL_PKE | \
-                                                        PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
-#define MX50_PAD_EIM_DA14__EPDC_SDCE8   IOMUX_PAD(0x630, 0x294, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_DA15__WEIM_A15     IOMUX_PAD(0x634, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_DA15__GPIO_1_15    IOMUX_PAD(0x634, 0x298, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PIN_EIM_DA15__NANDF_DQS    IOMUX_PAD(0x634, 0x298, 2, 0x7B0, 2, PAD_CTL_DSE_HIGH)
-#define MX50_PAD_EIM_DA15__EPDC_SDCE9   IOMUX_PAD(0x634, 0x298, 3, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS2__WEIM_CS2      IOMUX_PAD(0x638, 0x29C, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__GPIO_1_16     IOMUX_PAD(0x638, 0x29C, 1, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS2__WEIM_A27      IOMUX_PAD(0x638, 0x29C, 2, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS1__WEIM_CS1      IOMUX_PAD(0x63C, 0x2A0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS1__GPIO_1_17     IOMUX_PAD(0x63C, 0x2A0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CS0__WEIM_CS0      IOMUX_PAD(0x640, 0x2A4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CS0__GPIO_1_18     IOMUX_PAD(0x640, 0x2A4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB0__WEIM_EB0      IOMUX_PAD(0x644, 0x2A8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB0__GPIO_1_19     IOMUX_PAD(0x644, 0x2A8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_EB1__WEIM_EB1      IOMUX_PAD(0x648, 0x2AC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_EB1__GPIO_1_20     IOMUX_PAD(0x648, 0x2AC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_WAIT__WEIM_WAIT    IOMUX_PAD(0x64C, 0x2B0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_WAIT__GPIO_1_21    IOMUX_PAD(0x64C, 0x2B0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_BCLK__WEIM_BCLK    IOMUX_PAD(0x650, 0x2B4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_BCLK__GPIO_1_22    IOMUX_PAD(0x650, 0x2B4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RDY__WEIM_RDY      IOMUX_PAD(0x654, 0x2B8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RDY__GPIO_1_23     IOMUX_PAD(0x654, 0x2B8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_OE__WEIM_OE        IOMUX_PAD(0x658, 0x2BC, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_OE__GPIO_1_24      IOMUX_PAD(0x658, 0x2BC, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_RW__WEIM_RW        IOMUX_PAD(0x65C, 0x2C0, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_RW__GPIO_1_25      IOMUX_PAD(0x65C, 0x2C0, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_LBA__WEIM_LBA      IOMUX_PAD(0x660, 0x2C4, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_LBA__GPIO_1_26     IOMUX_PAD(0x660, 0x2C4, 1, 0x0, 0, NO_PAD_CTRL)
-
-#define MX50_PAD_EIM_CRE__WEIM_CRE      IOMUX_PAD(0x664, 0x2C8, 0, 0x0, 0, NO_PAD_CTRL)
-#define MX50_PAD_EIM_CRE__GPIO_1_27     IOMUX_PAD(0x664, 0x2C8, 1, 0x0, 0, NO_PAD_CTRL)
-
-#endif /* __MACH_IOMUX_MX50_H__ */
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
deleted file mode 100644
index 2fdc9bf2fb5e..000000000000
--- a/arch/arm/mach-imx/lluart.c
+++ /dev/null
@@ -1,47 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <asm/page.h>
-#include <asm/sizes.h>
-#include <asm/mach/map.h>
-
-#include "hardware.h"
-
-#define IMX6Q_UART1_BASE_ADDR   0x02020000
-#define IMX6Q_UART2_BASE_ADDR   0x021e8000
-#define IMX6Q_UART3_BASE_ADDR   0x021ec000
-#define IMX6Q_UART4_BASE_ADDR   0x021f0000
-#define IMX6Q_UART5_BASE_ADDR   0x021f4000
-
-/*
- * IMX6Q_UART_BASE_ADDR is put in the middle to force the expansion
- * of IMX6Q_UART##n##_BASE_ADDR.
- */
-#define IMX6Q_UART_BASE_ADDR(n) IMX6Q_UART##n##_BASE_ADDR
-#define IMX6Q_UART_BASE(n)      IMX6Q_UART_BASE_ADDR(n)
-#define IMX6Q_DEBUG_UART_BASE   IMX6Q_UART_BASE(CONFIG_DEBUG_IMX6Q_UART_PORT)
-
-static struct map_desc imx_lluart_desc = {
-#ifdef CONFIG_DEBUG_IMX6Q_UART
-        .virtual        = IMX_IO_P2V(IMX6Q_DEBUG_UART_BASE),
-        .pfn            = __phys_to_pfn(IMX6Q_DEBUG_UART_BASE),
-        .length         = 0x4000,
-        .type           = MT_DEVICE,
-#endif
-};
-
-void __init imx_lluart_map_io(void)
-{
-        if (imx_lluart_desc.virtual)
-                iotable_init(&imx_lluart_desc, 1);
-}
diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c
index 5c9bd2c66e6d..067580b2969b 100644
--- a/arch/arm/mach-imx/mach-apf9328.c
+++ b/arch/arm/mach-imx/mach-apf9328.c
@@ -137,17 +137,13 @@ static void __init apf9328_timer_init(void)
         mx1_clocks_init(32768);
 }
 
-static struct sys_timer apf9328_timer = {
-        .init   = apf9328_timer_init,
-};
-
 MACHINE_START(APF9328, "Armadeus APF9328")
         /* Maintainer: Gwenhael Goavec-Merou, ARMadeus Systems */
         .map_io       = mx1_map_io,
         .init_early   = imx1_init_early,
         .init_irq     = mx1_init_irq,
         .handle_irq   = imx1_handle_irq,
-        .timer        = &apf9328_timer,
+        .init_time      = apf9328_timer_init,
         .init_machine = apf9328_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index 59bd6b06a6b5..368a6e3f5926 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -557,10 +557,6 @@ static void __init armadillo5x0_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer armadillo5x0_timer = {
-        .init   = armadillo5x0_timer_init,
-};
-
 MACHINE_START(ARMADILLO5X0, "Armadillo-500")
         /* Maintainer: Alberto Panizzo  */
         .atag_offset = 0x100,
@@ -568,7 +564,7 @@ MACHINE_START(ARMADILLO5X0, "Armadillo-500")
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &armadillo5x0_timer,
+        .init_time      = armadillo5x0_timer_init,
         .init_machine = armadillo5x0_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c
index 3a39d5aec07a..2d00476f7d2c 100644
--- a/arch/arm/mach-imx/mach-bug.c
+++ b/arch/arm/mach-imx/mach-bug.c
@@ -53,16 +53,12 @@ static void __init bug_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer bug_timer = {
-        .init = bug_timer_init,
-};
-
 MACHINE_START(BUG, "BugLabs BUGBase")
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &bug_timer,
+        .init_time      = bug_timer_init,
         .init_machine = bug_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index 12a370646b45..146559311bd2 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -309,17 +309,13 @@ static void __init eukrea_cpuimx27_timer_init(void)
         mx27_clocks_init(26000000);
 }
 
-static struct sys_timer eukrea_cpuimx27_timer = {
-        .init = eukrea_cpuimx27_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
         .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &eukrea_cpuimx27_timer,
+        .init_time      = eukrea_cpuimx27_timer_init,
         .init_machine = eukrea_cpuimx27_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 5a31bf8c8f4c..771362d1fbee 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -193,10 +193,6 @@ static void __init eukrea_cpuimx35_timer_init(void)
         mx35_clocks_init();
 }
 
-static struct sys_timer eukrea_cpuimx35_timer = {
-        .init   = eukrea_cpuimx35_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
         /* Maintainer: Eukrea Electromatique */
         .atag_offset = 0x100,
@@ -204,7 +200,7 @@ MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
         .init_early = imx35_init_early,
         .init_irq = mx35_init_irq,
         .handle_irq = imx35_handle_irq,
-        .timer = &eukrea_cpuimx35_timer,
+        .init_time      = eukrea_cpuimx35_timer_init,
         .init_machine = eukrea_cpuimx35_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index b727de029c8f..9b7393234f6f 100644
--- a/arch/arm/mach-imx/mach-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
@@ -355,10 +355,6 @@ static void __init eukrea_cpuimx51sd_timer_init(void)
         mx51_clocks_init(32768, 24000000, 22579200, 0);
 }
 
-static struct sys_timer mxc_timer = {
-        .init   = eukrea_cpuimx51sd_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
         /* Maintainer: Eric Bénard <eric@eukrea.com> */
         .atag_offset = 0x100,
@@ -366,7 +362,7 @@ MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
         .handle_irq = imx51_handle_irq,
-        .timer = &mxc_timer,
+        .init_time      = eukrea_cpuimx51sd_timer_init,
         .init_machine = eukrea_cpuimx51sd_init,
         .init_late      = imx51_init_late,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 75027a5ad8b7..4bf454424249 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -159,10 +159,6 @@ static void __init eukrea_cpuimx25_timer_init(void)
         mx25_clocks_init();
 }
 
-static struct sys_timer eukrea_cpuimx25_timer = {
-        .init   = eukrea_cpuimx25_timer_init,
-};
-
 MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
         /* Maintainer: Eukrea Electromatique */
         .atag_offset = 0x100,
@@ -170,7 +166,7 @@ MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
         .init_early = imx25_init_early,
         .init_irq = mx25_init_irq,
         .handle_irq = imx25_handle_irq,
-        .timer = &eukrea_cpuimx25_timer,
+        .init_time = eukrea_cpuimx25_timer_init,
         .init_machine = eukrea_cpuimx25_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 318bd8df7fcc..29ac8ee651d2 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -598,10 +598,6 @@ static void __init visstrim_m10_timer_init(void)
         mx27_clocks_init((unsigned long)25000000);
 }
 
-static struct sys_timer visstrim_m10_timer = {
-        .init   = visstrim_m10_timer_init,
-};
-
 MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
         .atag_offset = 0x100,
         .reserve = visstrim_reserve,
@@ -609,7 +605,7 @@ MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &visstrim_m10_timer,
+        .init_time      = visstrim_m10_timer_init,
         .init_machine = visstrim_m10_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 53a860112938..1a851aea6832 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -65,10 +65,6 @@ static void __init mx27ipcam_timer_init(void)
         mx27_clocks_init(25000000);
 }
 
-static struct sys_timer mx27ipcam_timer = {
-        .init   = mx27ipcam_timer_init,
-};
-
 MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
         /* maintainer: Freescale Semiconductor, Inc. */
         .atag_offset = 0x100,
@@ -76,7 +72,7 @@ MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &mx27ipcam_timer,
+        .init_time      = mx27ipcam_timer_init,
         .init_machine = mx27ipcam_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index fc8dce931378..3da2e3e44ce9 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -72,17 +72,13 @@ static void __init mx27lite_timer_init(void)
         mx27_clocks_init(26000000);
 }
 
-static struct sys_timer mx27lite_timer = {
-        .init   = mx27lite_timer_init,
-};
-
 MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
         .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &mx27lite_timer,
+        .init_time      = mx27lite_timer_init,
         .init_machine = mx27lite_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 860284dea0e7..f579c616feed 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -44,26 +44,22 @@ static void __init imx53_dt_init(void)
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
-static void __init imx53_timer_init(void)
-{
-        mx53_clocks_init_dt();
-}
-
-static struct sys_timer imx53_timer = {
-        .init = imx53_timer_init,
-};
-
 static const char *imx53_dt_board_compat[] __initdata = {
         "fsl,imx53",
         NULL
 };
 
+static void __init imx53_timer_init(void)
+{
+        mx53_clocks_init_dt();
+}
+
 DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)")
         .map_io         = mx53_map_io,
         .init_early     = imx53_init_early,
         .init_irq       = mx53_init_irq,
         .handle_irq     = imx53_handle_irq,
-        .timer          = &imx53_timer,
+        .init_time      = imx53_timer_init,
         .init_machine   = imx53_dt_init,
         .init_late      = imx53_init_late,
         .dt_compat      = imx53_dt_board_compat,
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 4eb1b3ac794c..5a18e7e5c564 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -29,8 +30,8 @@
 #include <asm/cpuidle.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/map.h>
 #include <asm/mach/time.h>
 #include <asm/system_misc.h>
 
@@ -216,22 +217,16 @@ static void __init imx6q_init_late(void)
 
 static void __init imx6q_map_io(void)
 {
-        imx_lluart_map_io();
+        debug_ll_io_init();
         imx_scu_map_io();
-        imx6q_clock_map_io();
 }
 
-static const struct of_device_id imx6q_irq_match[] __initconst = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        { /* sentinel */ }
-};
-
 static void __init imx6q_init_irq(void)
 {
         l2x0_of_init(0, ~0UL);
         imx_src_init();
         imx_gpc_init();
-        of_irq_init(imx6q_irq_match);
+        irqchip_init();
 }
 
 static void __init imx6q_timer_init(void)
@@ -241,10 +236,6 @@ static void __init imx6q_timer_init(void)
         imx_print_silicon_rev("i.MX6Q", imx6q_revision());
 }
 
-static struct sys_timer imx6q_timer = {
-        .init = imx6q_timer_init,
-};
-
 static const char *imx6q_dt_compat[] __initdata = {
         "fsl,imx6q",
         NULL,
@@ -254,8 +245,7 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)")
         .smp            = smp_ops(imx_smp_ops),
         .map_io         = imx6q_map_io,
         .init_irq       = imx6q_init_irq,
-        .handle_irq     = imx6q_handle_irq,
-        .timer          = &imx6q_timer,
+        .init_time      = imx6q_timer_init,
         .init_machine   = imx6q_init_machine,
         .init_late      = imx6q_init_late,
         .dt_compat      = imx6q_dt_compat,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index 2e536ea53444..c7bc41d6b468 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -284,17 +284,13 @@ static void __init kzm_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer kzm_timer = {
-        .init = kzm_timer_init,
-};
-
 MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
         .atag_offset = 0x100,
         .map_io = kzm_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &kzm_timer,
+        .init_time      = kzm_timer_init,
         .init_machine = kzm_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 06b483783e68..9f883e4d6fc9 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -132,10 +132,6 @@ static void __init mx1ads_timer_init(void)
         mx1_clocks_init(32000);
 }
 
-static struct sys_timer mx1ads_timer = {
-        .init   = mx1ads_timer_init,
-};
-
 MACHINE_START(MX1ADS, "Freescale MX1ADS")
         /* Maintainer: Sascha Hauer, Pengutronix */
         .atag_offset = 0x100,
@@ -143,7 +139,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
         .init_early = imx1_init_early,
         .init_irq = mx1_init_irq,
         .handle_irq = imx1_handle_irq,
-        .timer = &mx1ads_timer,
+        .init_time      = mx1ads_timer_init,
         .init_machine = mx1ads_init,
         .restart        = mxc_restart,
 MACHINE_END
@@ -154,7 +150,7 @@ MACHINE_START(MXLADS, "Freescale MXLADS")
         .init_early = imx1_init_early,
         .init_irq = mx1_init_irq,
         .handle_irq = imx1_handle_irq,
-        .timer = &mx1ads_timer,
+        .init_time      = mx1ads_timer_init,
         .init_machine = mx1ads_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index 6adb3136bb08..a06aa4dc37fc 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -318,10 +318,6 @@ static void __init mx21ads_timer_init(void)
         mx21_clocks_init(32768, 26000000);
 }
 
-static struct sys_timer mx21ads_timer = {
-        .init   = mx21ads_timer_init,
-};
-
 MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
         /* maintainer: Freescale Semiconductor, Inc. */
         .atag_offset = 0x100,
@@ -329,7 +325,7 @@ MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
         .init_early = imx21_init_early,
         .init_irq = mx21_init_irq,
         .handle_irq = imx21_handle_irq,
-        .timer = &mx21ads_timer,
+        .init_time      = mx21ads_timer_init,
         .init_machine = mx21ads_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index b1b03aa55bb8..8bcda688a006 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -257,10 +257,6 @@ static void __init mx25pdk_timer_init(void)
         mx25_clocks_init();
 }
 
-static struct sys_timer mx25pdk_timer = {
-        .init   = mx25pdk_timer_init,
-};
-
 MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
         /* Maintainer: Freescale Semiconductor, Inc. */
         .atag_offset = 0x100,
@@ -268,7 +264,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
         .init_early = imx25_init_early,
         .init_irq = mx25_init_irq,
         .handle_irq = imx25_handle_irq,
-        .timer = &mx25pdk_timer,
+        .init_time      = mx25pdk_timer_init,
         .init_machine = mx25pdk_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index d0e547fa925f..25b3e4c9bc0a 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -538,10 +538,6 @@ static void __init mx27pdk_timer_init(void)
         mx27_clocks_init(26000000);
 }
 
-static struct sys_timer mx27pdk_timer = {
-        .init   = mx27pdk_timer_init,
-};
-
 MACHINE_START(MX27_3DS, "Freescale MX27PDK")
         /* maintainer: Freescale Semiconductor, Inc. */
         .atag_offset = 0x100,
@@ -549,7 +545,7 @@ MACHINE_START(MX27_3DS, "Freescale MX27PDK")
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &mx27pdk_timer,
+        .init_time      = mx27pdk_timer_init,
         .init_machine = mx27pdk_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index 3d036f57f0e6..9821b824dcaf 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -323,10 +323,6 @@ static void __init mx27ads_timer_init(void)
         mx27_clocks_init(fref);
 }
 
-static struct sys_timer mx27ads_timer = {
-        .init   = mx27ads_timer_init,
-};
-
 static struct map_desc mx27ads_io_desc[] __initdata = {
         {
                 .virtual = PBC_BASE_ADDRESS,
@@ -349,7 +345,7 @@ MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &mx27ads_timer,
+        .init_time      = mx27ads_timer_init,
         .init_machine = mx27ads_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index bc301befdd06..1ed916175d41 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -762,10 +762,6 @@ static void __init mx31_3ds_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31_3ds_timer = {
-        .init   = mx31_3ds_timer_init,
-};
-
 static void __init mx31_3ds_reserve(void)
 {
         /* reserve MX31_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
@@ -780,7 +776,7 @@ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &mx31_3ds_timer,
+        .init_time      = mx31_3ds_timer_init,
         .init_machine = mx31_3ds_init,
         .reserve = mx31_3ds_reserve,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 8b56f8883f32..daf8889125cc 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -576,10 +576,6 @@ static void __init mx31ads_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31ads_timer = {
-        .init   = mx31ads_timer_init,
-};
-
 MACHINE_START(MX31ADS, "Freescale MX31ADS")
         /* Maintainer: Freescale Semiconductor, Inc. */
         .atag_offset = 0x100,
@@ -587,7 +583,7 @@ MACHINE_START(MX31ADS, "Freescale MX31ADS")
         .init_early = imx31_init_early,
         .init_irq = mx31ads_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &mx31ads_timer,
+        .init_time      = mx31ads_timer_init,
         .init_machine = mx31ads_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 08b9965c8b36..832b1e2f964e 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -303,17 +303,13 @@ static void __init mx31lilly_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31lilly_timer = {
-        .init   = mx31lilly_timer_init,
-};
-
 MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
         .atag_offset = 0x100,
         .map_io = mx31_map_io,
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &mx31lilly_timer,
+        .init_time      = mx31lilly_timer_init,
         .init_machine = mx31lilly_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index bdcd92e59518..bea07299b61a 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -285,10 +285,6 @@ static void __init mx31lite_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31lite_timer = {
-        .init   = mx31lite_timer_init,
-};
-
 MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
         /* Maintainer: Freescale Semiconductor, Inc. */
         .atag_offset = 0x100,
@@ -296,7 +292,7 @@ MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &mx31lite_timer,
+        .init_time      = mx31lite_timer_init,
         .init_machine = mx31lite_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index 2517cfa9f26b..dae4cd7be040 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -596,10 +596,6 @@ static void __init mx31moboard_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer mx31moboard_timer = {
-        .init   = mx31moboard_timer_init,
-};
-
 static void __init mx31moboard_reserve(void)
 {
         /* reserve 4 MiB for mx3-camera */
@@ -615,7 +611,7 @@ MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &mx31moboard_timer,
+        .init_time      = mx31moboard_timer_init,
         .init_machine = mx31moboard_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 5277da45d60c..a42f4f07051f 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -602,10 +602,6 @@ static void __init mx35pdk_timer_init(void)
         mx35_clocks_init();
 }
 
-static struct sys_timer mx35pdk_timer = {
-        .init   = mx35pdk_timer_init,
-};
-
 static void __init mx35_3ds_reserve(void)
 {
         /* reserve MX35_3DS_CAMERA_BUF_SIZE bytes for mx3-camera */
@@ -620,7 +616,7 @@ MACHINE_START(MX35_3DS, "Freescale MX35PDK")
         .init_early = imx35_init_early,
         .init_irq = mx35_init_irq,
         .handle_irq = imx35_handle_irq,
-        .timer = &mx35pdk_timer,
+        .init_time      = mx35pdk_timer_init,
         .init_machine = mx35_3ds_init,
         .reserve = mx35_3ds_reserve,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
deleted file mode 100644
index 0c1f88a80bdc..000000000000
--- a/arch/arm/mach-imx/mach-mx50_rdp.c
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx50.h"
-#include "hardware.h"
-#include "iomux-mx50.h"
-
-#define FEC_EN          IMX_GPIO_NR(6, 23)
-#define FEC_RESET_B     IMX_GPIO_NR(4, 12)
-
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
-        /* SD1 */
-        MX50_PAD_ECSPI2_SS0__GPIO_4_19,
-        MX50_PAD_EIM_CRE__GPIO_1_27,
-        MX50_PAD_SD1_CMD__SD1_CMD,
-
-        MX50_PAD_SD1_CLK__SD1_CLK,
-        MX50_PAD_SD1_D0__SD1_D0,
-        MX50_PAD_SD1_D1__SD1_D1,
-        MX50_PAD_SD1_D2__SD1_D2,
-        MX50_PAD_SD1_D3__SD1_D3,
-
-        /* SD2 */
-        MX50_PAD_SD2_CD__GPIO_5_17,
-        MX50_PAD_SD2_WP__GPIO_5_16,
-        MX50_PAD_SD2_CMD__SD2_CMD,
-        MX50_PAD_SD2_CLK__SD2_CLK,
-        MX50_PAD_SD2_D0__SD2_D0,
-        MX50_PAD_SD2_D1__SD2_D1,
-        MX50_PAD_SD2_D2__SD2_D2,
-        MX50_PAD_SD2_D3__SD2_D3,
-        MX50_PAD_SD2_D4__SD2_D4,
-        MX50_PAD_SD2_D5__SD2_D5,
-        MX50_PAD_SD2_D6__SD2_D6,
-        MX50_PAD_SD2_D7__SD2_D7,
-
-        /* SD3 */
-        MX50_PAD_SD3_CMD__SD3_CMD,
-        MX50_PAD_SD3_CLK__SD3_CLK,
-        MX50_PAD_SD3_D0__SD3_D0,
-        MX50_PAD_SD3_D1__SD3_D1,
-        MX50_PAD_SD3_D2__SD3_D2,
-        MX50_PAD_SD3_D3__SD3_D3,
-        MX50_PAD_SD3_D4__SD3_D4,
-        MX50_PAD_SD3_D5__SD3_D5,
-        MX50_PAD_SD3_D6__SD3_D6,
-        MX50_PAD_SD3_D7__SD3_D7,
-
-        /* PWR_INT */
-        MX50_PAD_ECSPI2_MISO__GPIO_4_18,
-
-        /* UART pad setting */
-        MX50_PAD_UART1_TXD__UART1_TXD,
-        MX50_PAD_UART1_RXD__UART1_RXD,
-        MX50_PAD_UART1_RTS__UART1_RTS,
-        MX50_PAD_UART2_TXD__UART2_TXD,
-        MX50_PAD_UART2_RXD__UART2_RXD,
-        MX50_PAD_UART2_CTS__UART2_CTS,
-        MX50_PAD_UART2_RTS__UART2_RTS,
-
-        MX50_PAD_I2C1_SCL__I2C1_SCL,
-        MX50_PAD_I2C1_SDA__I2C1_SDA,
-        MX50_PAD_I2C2_SCL__I2C2_SCL,
-        MX50_PAD_I2C2_SDA__I2C2_SDA,
-
-        MX50_PAD_EPITO__USBH1_PWR,
-        /* Need to comment below line if
-         * one needs to debug owire.
-         */
-        MX50_PAD_OWIRE__USBH1_OC,
-        /* using gpio to control otg pwr */
-        MX50_PAD_PWM2__GPIO_6_25,
-        MX50_PAD_I2C3_SCL__USBOTG_OC,
-
-        MX50_PAD_SSI_RXC__FEC_MDIO,
-        MX50_PAD_SSI_RXFS__FEC_MDC,
-        MX50_PAD_DISP_D0__FEC_TXCLK,
-        MX50_PAD_DISP_D1__FEC_RX_ER,
-        MX50_PAD_DISP_D2__FEC_RX_DV,
-        MX50_PAD_DISP_D3__FEC_RXD1,
-        MX50_PAD_DISP_D4__FEC_RXD0,
-        MX50_PAD_DISP_D5__FEC_TX_EN,
-        MX50_PAD_DISP_D6__FEC_TXD1,
-        MX50_PAD_DISP_D7__FEC_TXD0,
-        MX50_PAD_I2C3_SDA__GPIO_6_23,
-        MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
-
-        MX50_PAD_CSPI_SS0__CSPI_SS0,
-        MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
-        MX50_PAD_CSPI_MOSI__CSPI_MOSI,
-        MX50_PAD_CSPI_MISO__CSPI_MISO,
-
-        /* SGTL500_OSC_EN */
-        MX50_PAD_UART1_CTS__GPIO_6_8,
-
-        /* SGTL_AMP_SHDN */
-        MX50_PAD_UART3_RXD__GPIO_6_15,
-
-        /* Keypad */
-        MX50_PAD_KEY_COL0__KEY_COL0,
-        MX50_PAD_KEY_ROW0__KEY_ROW0,
-        MX50_PAD_KEY_COL1__KEY_COL1,
-        MX50_PAD_KEY_ROW1__KEY_ROW1,
-        MX50_PAD_KEY_COL2__KEY_COL2,
-        MX50_PAD_KEY_ROW2__KEY_ROW2,
-        MX50_PAD_KEY_COL3__KEY_COL3,
-        MX50_PAD_KEY_ROW3__KEY_ROW3,
-        MX50_PAD_EIM_DA0__KEY_COL4,
-        MX50_PAD_EIM_DA1__KEY_ROW4,
-        MX50_PAD_EIM_DA2__KEY_COL5,
-        MX50_PAD_EIM_DA3__KEY_ROW5,
-        MX50_PAD_EIM_DA4__KEY_COL6,
-        MX50_PAD_EIM_DA5__KEY_ROW6,
-        MX50_PAD_EIM_DA6__KEY_COL7,
-        MX50_PAD_EIM_DA7__KEY_ROW7,
-        /*EIM pads */
-        MX50_PAD_EIM_DA8__GPIO_1_8,
-        MX50_PAD_EIM_DA9__GPIO_1_9,
-        MX50_PAD_EIM_DA10__GPIO_1_10,
-        MX50_PAD_EIM_DA11__GPIO_1_11,
-        MX50_PAD_EIM_DA12__GPIO_1_12,
-        MX50_PAD_EIM_DA13__GPIO_1_13,
-        MX50_PAD_EIM_DA14__GPIO_1_14,
-        MX50_PAD_EIM_DA15__GPIO_1_15,
-        MX50_PAD_EIM_CS2__GPIO_1_16,
-        MX50_PAD_EIM_CS1__GPIO_1_17,
-        MX50_PAD_EIM_CS0__GPIO_1_18,
-        MX50_PAD_EIM_EB0__GPIO_1_19,
-        MX50_PAD_EIM_EB1__GPIO_1_20,
-        MX50_PAD_EIM_WAIT__GPIO_1_21,
-        MX50_PAD_EIM_BCLK__GPIO_1_22,
-        MX50_PAD_EIM_RDY__GPIO_1_23,
-        MX50_PAD_EIM_OE__GPIO_1_24,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-        .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fec_platform_data fec_data __initconst = {
-        .phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static inline void mx50_rdp_fec_reset(void)
-{
-        gpio_request(FEC_EN, "fec-en");
-        gpio_direction_output(FEC_EN, 0);
-        gpio_request(FEC_RESET_B, "fec-reset_b");
-        gpio_direction_output(FEC_RESET_B, 0);
-        msleep(1);
-        gpio_set_value(FEC_RESET_B, 1);
-}
-
-static const struct imxi2c_platform_data i2c_data __initconst = {
-        .bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx50_rdp_board_init(void)
-{
-        imx50_soc_init();
-
-        mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
-                                        ARRAY_SIZE(mx50_rdp_pads));
-
-        imx50_add_imx_uart(0, &uart_pdata);
-        imx50_add_imx_uart(1, &uart_pdata);
-        mx50_rdp_fec_reset();
-        imx50_add_fec(&fec_data);
-        imx50_add_imx_i2c(0, &i2c_data);
-        imx50_add_imx_i2c(1, &i2c_data);
-        imx50_add_imx_i2c(2, &i2c_data);
-}
-
-static void __init mx50_rdp_timer_init(void)
-{
-        mx50_clocks_init(32768, 24000000, 22579200);
-}
-
-static struct sys_timer mx50_rdp_timer = {
-        .init   = mx50_rdp_timer_init,
-};
-
-MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
-        .map_io = mx50_map_io,
-        .init_early = imx50_init_early,
-        .init_irq = mx50_init_irq,
-        .handle_irq = imx50_handle_irq,
-        .timer = &mx50_rdp_timer,
-        .init_machine = mx50_rdp_board_init,
-        .restart        = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
deleted file mode 100644
index abc25bd1107b..000000000000
--- a/arch/arm/mach-imx/mach-mx51_3ds.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2010 Jason Wang <jason77.wang@gmail.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "3ds_debugboard.h"
-#include "common.h"
-#include "devices-imx51.h"
-#include "hardware.h"
-#include "iomux-mx51.h"
-
-#define MX51_3DS_ECSPI2_CS      (GPIO_PORTC + 28)
-
-static iomux_v3_cfg_t mx51_3ds_pads[] = {
-        /* UART1 */
-        MX51_PAD_UART1_RXD__UART1_RXD,
-        MX51_PAD_UART1_TXD__UART1_TXD,
-        MX51_PAD_UART1_RTS__UART1_RTS,
-        MX51_PAD_UART1_CTS__UART1_CTS,
-
-        /* UART2 */
-        MX51_PAD_UART2_RXD__UART2_RXD,
-        MX51_PAD_UART2_TXD__UART2_TXD,
-        MX51_PAD_EIM_D25__UART2_CTS,
-        MX51_PAD_EIM_D26__UART2_RTS,
-
-        /* UART3 */
-        MX51_PAD_UART3_RXD__UART3_RXD,
-        MX51_PAD_UART3_TXD__UART3_TXD,
-        MX51_PAD_EIM_D24__UART3_CTS,
-        MX51_PAD_EIM_D27__UART3_RTS,
-
-        /* CPLD PARENT IRQ PIN */
-        MX51_PAD_GPIO1_6__GPIO1_6,
-
-        /* KPP */
-        MX51_PAD_KEY_ROW0__KEY_ROW0,
-        MX51_PAD_KEY_ROW1__KEY_ROW1,
-        MX51_PAD_KEY_ROW2__KEY_ROW2,
-        MX51_PAD_KEY_ROW3__KEY_ROW3,
-        MX51_PAD_KEY_COL0__KEY_COL0,
-        MX51_PAD_KEY_COL1__KEY_COL1,
-        MX51_PAD_KEY_COL2__KEY_COL2,
-        MX51_PAD_KEY_COL3__KEY_COL3,
-        MX51_PAD_KEY_COL4__KEY_COL4,
-        MX51_PAD_KEY_COL5__KEY_COL5,
-
-        /* eCSPI2 */
-        MX51_PAD_NANDF_RB2__ECSPI2_SCLK,
-        MX51_PAD_NANDF_RB3__ECSPI2_MISO,
-        MX51_PAD_NANDF_D15__ECSPI2_MOSI,
-        MX51_PAD_NANDF_D12__GPIO3_28,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-        .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static int mx51_3ds_board_keymap[] = {
-        KEY(0, 0, KEY_1),
-        KEY(0, 1, KEY_2),
-        KEY(0, 2, KEY_3),
-        KEY(0, 3, KEY_F1),
-        KEY(0, 4, KEY_UP),
-        KEY(0, 5, KEY_F2),
-
-        KEY(1, 0, KEY_4),
-        KEY(1, 1, KEY_5),
-        KEY(1, 2, KEY_6),
-        KEY(1, 3, KEY_LEFT),
-        KEY(1, 4, KEY_SELECT),
-        KEY(1, 5, KEY_RIGHT),
-
-        KEY(2, 0, KEY_7),
-        KEY(2, 1, KEY_8),
-        KEY(2, 2, KEY_9),
-        KEY(2, 3, KEY_F3),
-        KEY(2, 4, KEY_DOWN),
-        KEY(2, 5, KEY_F4),
-
-        KEY(3, 0, KEY_0),
-        KEY(3, 1, KEY_OK),
-        KEY(3, 2, KEY_ESC),
-        KEY(3, 3, KEY_ENTER),
-        KEY(3, 4, KEY_MENU),
-        KEY(3, 5, KEY_BACK)
-};
-
-static const struct matrix_keymap_data mx51_3ds_map_data __initconst = {
-        .keymap         = mx51_3ds_board_keymap,
-        .keymap_size    = ARRAY_SIZE(mx51_3ds_board_keymap),
-};
-
-static int mx51_3ds_spi2_cs[] = {
-        MXC_SPI_CS(0),
-        MX51_3DS_ECSPI2_CS,
-};
-
-static const struct spi_imx_master mx51_3ds_ecspi2_pdata __initconst = {
-        .chipselect     = mx51_3ds_spi2_cs,
-        .num_chipselect = ARRAY_SIZE(mx51_3ds_spi2_cs),
-};
-
-static struct spi_board_info mx51_3ds_spi_nor_device[] = {
-        {
-         .modalias = "m25p80",
-         .max_speed_hz = 25000000,      /* max spi clock (SCK) speed in HZ */
-         .bus_num = 1,
-         .chip_select = 1,
-         .mode = SPI_MODE_0,
-         .platform_data = NULL,},
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx51_3ds_init(void)
-{
-        imx51_soc_init();
-
-        mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads,
-                                        ARRAY_SIZE(mx51_3ds_pads));
-
-        imx51_add_imx_uart(0, &uart_pdata);
-        imx51_add_imx_uart(1, &uart_pdata);
-        imx51_add_imx_uart(2, &uart_pdata);
-
-        imx51_add_ecspi(1, &mx51_3ds_ecspi2_pdata);
-        spi_register_board_info(mx51_3ds_spi_nor_device,
-                                ARRAY_SIZE(mx51_3ds_spi_nor_device));
-
-        if (mxc_expio_init(MX51_CS5_BASE_ADDR, IMX_GPIO_NR(1, 6)))
-                printk(KERN_WARNING "Init of the debugboard failed, all "
-                                    "devices on the board are unusable.\n");
-
-        imx51_add_sdhci_esdhc_imx(0, NULL);
-        imx51_add_imx_keypad(&mx51_3ds_map_data);
-        imx51_add_imx2_wdt(0);
-}
-
-static void __init mx51_3ds_timer_init(void)
-{
-        mx51_clocks_init(32768, 24000000, 22579200, 0);
-}
-
-static struct sys_timer mx51_3ds_timer = {
-        .init = mx51_3ds_timer_init,
-};
-
-MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
-        /* Maintainer: Freescale Semiconductor, Inc. */
-        .atag_offset = 0x100,
-        .map_io = mx51_map_io,
-        .init_early = imx51_init_early,
-        .init_irq = mx51_init_irq,
-        .handle_irq = imx51_handle_irq,
-        .timer = &mx51_3ds_timer,
-        .init_machine = mx51_3ds_init,
-        .init_late      = imx51_init_late,
-        .restart        = mxc_restart,
-MACHINE_END
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index d9a84ca2199a..6c4d7feb4520 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -418,10 +418,6 @@ static void __init mx51_babbage_timer_init(void)
         mx51_clocks_init(32768, 24000000, 22579200, 0);
 }
 
-static struct sys_timer mx51_babbage_timer = {
-        .init = mx51_babbage_timer_init,
-};
-
 MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
         /* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
         .atag_offset = 0x100,
@@ -429,7 +425,7 @@ MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
         .init_early = imx51_init_early,
         .init_irq = mx51_init_irq,
         .handle_irq = imx51_handle_irq,
-        .timer = &mx51_babbage_timer,
+        .init_time      = mx51_babbage_timer_init,
         .init_machine = mx51_babbage_init,
         .init_late      = imx51_init_late,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index f4a8c7e108e1..a27faaba98ec 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -261,10 +261,6 @@ static void __init mxt_td60_timer_init(void)
         mx27_clocks_init(26000000);
 }
 
-static struct sys_timer mxt_td60_timer = {
-        .init   = mxt_td60_timer_init,
-};
-
 MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
         /* maintainer: Maxtrack Industrial */
         .atag_offset = 0x100,
@@ -272,7 +268,7 @@ MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &mxt_td60_timer,
+        .init_time      = mxt_td60_timer_init,
         .init_machine = mxt_td60_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index eee369fa94a2..b8b15bb1ffdf 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -416,10 +416,6 @@ static void __init pca100_timer_init(void)
         mx27_clocks_init(26000000);
 }
 
-static struct sys_timer pca100_timer = {
-        .init = pca100_timer_init,
-};
-
 MACHINE_START(PCA100, "phyCARD-i.MX27")
         .atag_offset = 0x100,
         .map_io = mx27_map_io,
@@ -427,6 +423,6 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
         .init_machine = pca100_init,
-        .timer = &pca100_timer,
+        .init_time      = pca100_timer_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 547fef133f65..bc0261e99d39 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -685,10 +685,6 @@ static void __init pcm037_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer pcm037_timer = {
-        .init   = pcm037_timer_init,
-};
-
 static void __init pcm037_reserve(void)
 {
         /* reserve 4 MiB for mx3-camera */
@@ -709,7 +705,7 @@ MACHINE_START(PCM037, "Phytec Phycore pcm037")
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &pcm037_timer,
+        .init_time      = pcm037_timer_init,
         .init_machine = pcm037_init,
         .init_late = pcm037_init_late,
         .restart        = mxc_restart,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 4aa0d0798605..e805ac273e9c 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -346,17 +346,13 @@ static void __init pcm038_timer_init(void)
         mx27_clocks_init(26000000);
 }
 
-static struct sys_timer pcm038_timer = {
-        .init = pcm038_timer_init,
-};
-
 MACHINE_START(PCM038, "phyCORE-i.MX27")
         .atag_offset = 0x100,
         .map_io = mx27_map_io,
         .init_early = imx27_init_early,
         .init_irq = mx27_init_irq,
         .handle_irq = imx27_handle_irq,
-        .timer = &pcm038_timer,
+        .init_time      = pcm038_timer_init,
         .init_machine = pcm038_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 92445440221e..8ed533f0f8ca 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -394,10 +394,6 @@ static void __init pcm043_timer_init(void)
         mx35_clocks_init();
 }
 
-static struct sys_timer pcm043_timer = {
-        .init   = pcm043_timer_init,
-};
-
 MACHINE_START(PCM043, "Phytec Phycore pcm043")
         /* Maintainer: Pengutronix */
         .atag_offset = 0x100,
@@ -405,7 +401,7 @@ MACHINE_START(PCM043, "Phytec Phycore pcm043")
         .init_early = imx35_init_early,
         .init_irq = mx35_init_irq,
         .handle_irq = imx35_handle_irq,
-        .timer = &pcm043_timer,
+        .init_time = pcm043_timer_init,
         .init_machine = pcm043_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 96d9a91f8a3b..22af27ed457e 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -260,10 +260,6 @@ static void __init qong_timer_init(void)
         mx31_clocks_init(26000000);
 }
 
-static struct sys_timer qong_timer = {
-        .init   = qong_timer_init,
-};
-
 MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
         /* Maintainer: DENX Software Engineering GmbH */
         .atag_offset = 0x100,
@@ -271,7 +267,7 @@ MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
         .init_early = imx31_init_early,
         .init_irq = mx31_init_irq,
         .handle_irq = imx31_handle_irq,
-        .timer = &qong_timer,
+        .init_time      = qong_timer_init,
         .init_machine = qong_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index fc970409dbaf..b0fa10dd79fe 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -131,10 +131,6 @@ static void __init scb9328_timer_init(void)
         mx1_clocks_init(32000);
 }
 
-static struct sys_timer scb9328_timer = {
-        .init   = scb9328_timer_init,
-};
-
 MACHINE_START(SCB9328, "Synertronixx scb9328")
         /* Sascha Hauer */
         .atag_offset = 100,
@@ -142,7 +138,7 @@ MACHINE_START(SCB9328, "Synertronixx scb9328")
         .init_early = imx1_init_early,
         .init_irq = mx1_init_irq,
         .handle_irq = imx1_handle_irq,
-        .timer = &scb9328_timer,
+        .init_time      = scb9328_timer_init,
         .init_machine = scb9328_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 3aecf91e4289..0910761e8280 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -305,17 +305,13 @@ static void __init vpr200_timer_init(void)
         mx35_clocks_init();
 }
 
-static struct sys_timer vpr200_timer = {
-        .init   = vpr200_timer_init,
-};
-
 MACHINE_START(VPR200, "VPR200")
         /* Maintainer: Creative Product Design */
         .map_io = mx35_map_io,
         .init_early = imx35_init_early,
         .init_irq = mx35_init_irq,
         .handle_irq = imx35_handle_irq,
-        .timer = &vpr200_timer,
+        .init_time = vpr200_timer_init,
         .init_machine = vpr200_board_init,
         .restart        = mxc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 79d71cf23a1d..cf34994cfe28 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -24,16 +24,6 @@
 #include "iomux-v3.h"
 
 /*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-        imx_map_entry(MX50, TZIC, MT_DEVICE),
-        imx_map_entry(MX50, SPBA0, MT_DEVICE),
-        imx_map_entry(MX50, AIPS1, MT_DEVICE),
-        imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
  * Define the MX51 memory map.
  */
 static struct map_desc mx51_io_desc[] __initdata = {
@@ -59,11 +49,6 @@ static struct map_desc mx53_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mx50_map_io(void)
-{
-        iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
 void __init mx51_map_io(void)
 {
         iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
@@ -74,13 +59,6 @@ void __init mx53_map_io(void)
         iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
 }
 
-void __init imx50_init_early(void)
-{
-        mxc_set_cpu_type(MXC_CPU_MX50);
-        mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-        mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
 /*
  * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
  * the Freescale marketing division. However this did not remove the
@@ -115,11 +93,6 @@ void __init imx53_init_early(void)
         mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-void __init mx50_init_irq(void)
-{
-        tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
 void __init mx51_init_irq(void)
 {
         tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
@@ -148,31 +121,10 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = {
         .script_addrs = &imx51_sdma_script,
 };
 
-static const struct resource imx50_audmux_res[] __initconst = {
-        DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
 static const struct resource imx51_audmux_res[] __initconst = {
         DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
-void __init imx50_soc_init(void)
-{
-        mxc_device_init();
-
-        /* i.mx50 has the i.mx35 type gpio */
-        mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-        mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-        mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-        mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-        mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-        mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-
-        /* i.mx50 has the i.mx31 type audmux */
-        platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
-                                        ARRAY_SIZE(imx50_audmux_res));
-}
-
 void __init imx51_soc_init(void)
 {
         mxc_device_init();
diff --git a/arch/arm/mach-imx/mx50.h b/arch/arm/mach-imx/mx50.h
deleted file mode 100644
index 09ac19c1570c..000000000000
--- a/arch/arm/mach-imx/mx50.h
+++ /dev/null
@@ -1,290 +0,0 @@
-#ifndef __MACH_MX50_H__
-#define __MACH_MX50_H__
-
-/*
- * IROM
- */
-#define MX50_IROM_BASE_ADDR             0x0
-#define MX50_IROM_SIZE                  SZ_64K
-
-/* TZIC */
-#define MX50_TZIC_BASE_ADDR             0x0fffc000
-#define MX50_TZIC_SIZE                  SZ_16K
-
-/*
- * IRAM
- */
-#define MX50_IRAM_BASE_ADDR     0xf8000000      /* internal ram */
-#define MX50_IRAM_PARTITIONS    16
-#define MX50_IRAM_SIZE          (MX50_IRAM_PARTITIONS * SZ_8K)  /* 128KB */
-
-/*
- * Databahn
- */
-#define MX50_DATABAHN_BASE_ADDR                 0x14000000
-
-/*
- * Graphics Memory of GPU
- */
-#define MX50_GPU2D_BASE_ADDR            0x20000000
-
-#define MX50_DEBUG_BASE_ADDR            0x40000000
-#define MX50_DEBUG_SIZE                 SZ_1M
-#define MX50_ETB_BASE_ADDR              (MX50_DEBUG_BASE_ADDR + 0x00001000)
-#define MX50_ETM_BASE_ADDR              (MX50_DEBUG_BASE_ADDR + 0x00002000)
-#define MX50_TPIU_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x00003000)
-#define MX50_CTI0_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x00004000)
-#define MX50_CTI1_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x00005000)
-#define MX50_CTI2_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x00006000)
-#define MX50_CTI3_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x00007000)
-#define MX50_CORTEX_DBG_BASE_ADDR       (MX50_DEBUG_BASE_ADDR + 0x00008000)
-
-#define MX50_APBHDMA_BASE_ADDR          (MX50_DEBUG_BASE_ADDR + 0x01000000)
-#define MX50_OCOTP_CTRL_BASE_ADDR       (MX50_DEBUG_BASE_ADDR + 0x01002000)
-#define MX50_DIGCTL_BASE_ADDR           (MX50_DEBUG_BASE_ADDR + 0x01004000)
-#define MX50_GPMI_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x01006000)
-#define MX50_BCH_BASE_ADDR              (MX50_DEBUG_BASE_ADDR + 0x01008000)
-#define MX50_ELCDIF_BASE_ADDR           (MX50_DEBUG_BASE_ADDR + 0x0100a000)
-#define MX50_EPXP_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x0100c000)
-#define MX50_DCP_BASE_ADDR              (MX50_DEBUG_BASE_ADDR + 0x0100e000)
-#define MX50_EPDC_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x01010000)
-#define MX50_QOSC_BASE_ADDR             (MX50_DEBUG_BASE_ADDR + 0x01012000)
-#define MX50_PERFMON_BASE_ADDR          (MX50_DEBUG_BASE_ADDR + 0x01014000)
-#define MX50_SSP_BASE_ADDR              (MX50_DEBUG_BASE_ADDR + 0x01016000)
-#define MX50_ANATOP_BASE_ADDR           (MX50_DEBUG_BASE_ADDR + 0x01018000)
-#define MX50_NIC_BASE_ADDR              (MX50_DEBUG_BASE_ADDR + 0x08000000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX50_SPBA0_BASE_ADDR            0x50000000
-#define MX50_SPBA0_SIZE                 SZ_1M
-
-#define MX50_MMC_SDHC1_BASE_ADDR        (MX50_SPBA0_BASE_ADDR + 0x00004000)
-#define MX50_MMC_SDHC2_BASE_ADDR        (MX50_SPBA0_BASE_ADDR + 0x00008000)
-#define MX50_UART3_BASE_ADDR            (MX50_SPBA0_BASE_ADDR + 0x0000c000)
-#define MX50_CSPI1_BASE_ADDR            (MX50_SPBA0_BASE_ADDR + 0x00010000)
-#define MX50_SSI2_BASE_ADDR             (MX50_SPBA0_BASE_ADDR + 0x00014000)
-#define MX50_MMC_SDHC3_BASE_ADDR        (MX50_SPBA0_BASE_ADDR + 0x00020000)
-#define MX50_MMC_SDHC4_BASE_ADDR        (MX50_SPBA0_BASE_ADDR + 0x00024000)
-
-/*
- * AIPS 1
- */
-#define MX50_AIPS1_BASE_ADDR    0x53f00000
-#define MX50_AIPS1_SIZE         SZ_1M
-
-#define MX50_OTG_BASE_ADDR      (MX50_AIPS1_BASE_ADDR + 0x00080000)
-#define MX50_GPIO1_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x00084000)
-#define MX50_GPIO2_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x00088000)
-#define MX50_GPIO3_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x0008c000)
-#define MX50_GPIO4_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x00090000)
-#define MX50_KPP_BASE_ADDR      (MX50_AIPS1_BASE_ADDR + 0x00094000)
-#define MX50_WDOG_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x00098000)
-#define MX50_GPT1_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x000a0000)
-#define MX50_SRTC_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x000a4000)
-#define MX50_IOMUXC_BASE_ADDR   (MX50_AIPS1_BASE_ADDR + 0x000a8000)
-#define MX50_EPIT1_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x000ac000)
-#define MX50_PWM1_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x000b4000)
-#define MX50_PWM2_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x000b8000)
-#define MX50_UART1_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x000bc000)
-#define MX50_UART2_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x000c0000)
-#define MX50_SRC_BASE_ADDR      (MX50_AIPS1_BASE_ADDR + 0x000d0000)
-#define MX50_CCM_BASE_ADDR      (MX50_AIPS1_BASE_ADDR + 0x000d4000)
-#define MX50_GPC_BASE_ADDR      (MX50_AIPS1_BASE_ADDR + 0x000d8000)
-#define MX50_GPIO5_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x000dc000)
-#define MX50_GPIO6_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x000e0000)
-#define MX50_I2C3_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x000ec000)
-#define MX50_UART4_BASE_ADDR    (MX50_AIPS1_BASE_ADDR + 0x000f0000)
-
-#define MX50_MSHC_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x000f4000)
-#define MX50_RNGB_BASE_ADDR     (MX50_AIPS1_BASE_ADDR + 0x000f8000)
-
-/*
- * AIPS 2
- */
-#define MX50_AIPS2_BASE_ADDR    0x63f00000
-#define MX50_AIPS2_SIZE         SZ_1M
-
-#define MX50_PLL1_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x00080000)
-#define MX50_PLL2_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x00084000)
-#define MX50_PLL3_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x00088000)
-#define MX50_UART5_BASE_ADDR    (MX50_AIPS2_BASE_ADDR + 0x00090000)
-#define MX50_AHBMAX_BASE_ADDR   (MX50_AIPS2_BASE_ADDR + 0x00094000)
-#define MX50_ARM_BASE_ADDR      (MX50_AIPS2_BASE_ADDR + 0x000a0000)
-#define MX50_OWIRE_BASE_ADDR    (MX50_AIPS2_BASE_ADDR + 0x000a4000)
-#define MX50_CSPI2_BASE_ADDR    (MX50_AIPS2_BASE_ADDR + 0x000ac000)
-#define MX50_SDMA_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x000b0000)
-#define MX50_ROMCP_BASE_ADDR    (MX50_AIPS2_BASE_ADDR + 0x000b8000)
-#define MX50_CSPI3_BASE_ADDR    (MX50_AIPS2_BASE_ADDR + 0x000c0000)
-#define MX50_I2C2_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x000c4000)
-#define MX50_I2C1_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x000c8000)
-#define MX50_SSI1_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x000cc000)
-#define MX50_AUDMUX_BASE_ADDR   (MX50_AIPS2_BASE_ADDR + 0x000d0000)
-#define MX50_WEIM_BASE_ADDR     (MX50_AIPS2_BASE_ADDR + 0x000d8000)
-#define MX50_FEC_BASE_ADDR      (MX50_AIPS2_BASE_ADDR + 0x000ec000)
-
-/*
- * Memory regions and CS
- */
-#define MX50_CSD0_BASE_ADDR             0x70000000
-#define MX50_CSD1_BASE_ADDR             0xb0000000
-#define MX50_CS0_BASE_ADDR              0xf0000000
-
-#define MX50_IO_P2V(x)                  IMX_IO_P2V(x)
-#define MX50_IO_ADDRESS(x)              IOMEM(MX50_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX50_SPBA_SDHC1         0x04
-#define MX50_SPBA_SDHC2         0x08
-#define MX50_SPBA_UART3         0x0c
-#define MX50_SPBA_CSPI1         0x10
-#define MX50_SPBA_SSI2          0x14
-#define MX50_SPBA_SDHC3         0x20
-#define MX50_SPBA_SDHC4         0x24
-#define MX50_SPBA_SPDIF         0x28
-#define MX50_SPBA_ATA           0x30
-#define MX50_SPBA_SLIM          0x34
-#define MX50_SPBA_HSI2C         0x38
-#define MX50_SPBA_CTRL          0x3c
-
-/*
- * DMA request assignments
- */
-#define MX50_DMA_REQ_GPC                1
-#define MX50_DMA_REQ_ATA_UART4_RX       2
-#define MX50_DMA_REQ_ATA_UART4_TX       3
-#define MX50_DMA_REQ_CSPI1_RX           6
-#define MX50_DMA_REQ_CSPI1_TX           7
-#define MX50_DMA_REQ_CSPI2_RX           8
-#define MX50_DMA_REQ_CSPI2_TX           9
-#define MX50_DMA_REQ_I2C3_SDHC3         10
-#define MX50_DMA_REQ_SDHC4              11
-#define MX50_DMA_REQ_UART2_FIRI_RX      12
-#define MX50_DMA_REQ_UART2_FIRI_TX      13
-#define MX50_DMA_REQ_EXT0               14
-#define MX50_DMA_REQ_EXT1               15
-#define MX50_DMA_REQ_UART5_RX           16
-#define MX50_DMA_REQ_UART5_TX           17
-#define MX50_DMA_REQ_UART1_RX           18
-#define MX50_DMA_REQ_UART1_TX           19
-#define MX50_DMA_REQ_I2C1_SDHC1         20
-#define MX50_DMA_REQ_I2C2_SDHC2         21
-#define MX50_DMA_REQ_SSI2_RX2           22
-#define MX50_DMA_REQ_SSI2_TX2           23
-#define MX50_DMA_REQ_SSI2_RX1           24
-#define MX50_DMA_REQ_SSI2_TX1           25
-#define MX50_DMA_REQ_SSI1_RX2           26
-#define MX50_DMA_REQ_SSI1_TX2           27
-#define MX50_DMA_REQ_SSI1_RX1           28
-#define MX50_DMA_REQ_SSI1_TX1           29
-#define MX50_DMA_REQ_CSPI_RX            38
-#define MX50_DMA_REQ_CSPI_TX            39
-#define MX50_DMA_REQ_UART3_RX           42
-#define MX50_DMA_REQ_UART3_TX           43
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX50_INT_MMC_SDHC1      (NR_IRQS_LEGACY + 1)
-#define MX50_INT_MMC_SDHC2      (NR_IRQS_LEGACY + 2)
-#define MX50_INT_MMC_SDHC3      (NR_IRQS_LEGACY + 3)
-#define MX50_INT_MMC_SDHC4      (NR_IRQS_LEGACY + 4)
-#define MX50_INT_DAP            (NR_IRQS_LEGACY + 5)
-#define MX50_INT_SDMA           (NR_IRQS_LEGACY + 6)
-#define MX50_INT_IOMUX          (NR_IRQS_LEGACY + 7)
-#define MX50_INT_UART4          (NR_IRQS_LEGACY + 13)
-#define MX50_INT_USB_H1         (NR_IRQS_LEGACY + 14)
-#define MX50_INT_USB_OTG        (NR_IRQS_LEGACY + 18)
-#define MX50_INT_DATABAHN       (NR_IRQS_LEGACY + 19)
-#define MX50_INT_ELCDIF         (NR_IRQS_LEGACY + 20)
-#define MX50_INT_EPXP           (NR_IRQS_LEGACY + 21)
-#define MX50_INT_SRTC_NTZ       (NR_IRQS_LEGACY + 24)
-#define MX50_INT_SRTC_TZ        (NR_IRQS_LEGACY + 25)
-#define MX50_INT_EPDC           (NR_IRQS_LEGACY + 27)
-#define MX50_INT_NIC            (NR_IRQS_LEGACY + 28)
-#define MX50_INT_SSI1           (NR_IRQS_LEGACY + 29)
-#define MX50_INT_SSI2           (NR_IRQS_LEGACY + 30)
-#define MX50_INT_UART1          (NR_IRQS_LEGACY + 31)
-#define MX50_INT_UART2          (NR_IRQS_LEGACY + 32)
-#define MX50_INT_UART3          (NR_IRQS_LEGACY + 33)
-#define MX50_INT_RESV34         (NR_IRQS_LEGACY + 34)
-#define MX50_INT_RESV35         (NR_IRQS_LEGACY + 35)
-#define MX50_INT_CSPI1          (NR_IRQS_LEGACY + 36)
-#define MX50_INT_CSPI2          (NR_IRQS_LEGACY + 37)
-#define MX50_INT_CSPI           (NR_IRQS_LEGACY + 38)
-#define MX50_INT_GPT            (NR_IRQS_LEGACY + 39)
-#define MX50_INT_EPIT1          (NR_IRQS_LEGACY + 40)
-#define MX50_INT_GPIO1_INT7     (NR_IRQS_LEGACY + 42)
-#define MX50_INT_GPIO1_INT6     (NR_IRQS_LEGACY + 43)
-#define MX50_INT_GPIO1_INT5     (NR_IRQS_LEGACY + 44)
-#define MX50_INT_GPIO1_INT4     (NR_IRQS_LEGACY + 45)
-#define MX50_INT_GPIO1_INT3     (NR_IRQS_LEGACY + 46)
-#define MX50_INT_GPIO1_INT2     (NR_IRQS_LEGACY + 47)
-#define MX50_INT_GPIO1_INT1     (NR_IRQS_LEGACY + 48)
-#define MX50_INT_GPIO1_INT0     (NR_IRQS_LEGACY + 49)
-#define MX50_INT_GPIO1_LOW      (NR_IRQS_LEGACY + 50)
-#define MX50_INT_GPIO1_HIGH     (NR_IRQS_LEGACY + 51)
-#define MX50_INT_GPIO2_LOW      (NR_IRQS_LEGACY + 52)
-#define MX50_INT_GPIO2_HIGH     (NR_IRQS_LEGACY + 53)
-#define MX50_INT_GPIO3_LOW      (NR_IRQS_LEGACY + 54)
-#define MX50_INT_GPIO3_HIGH     (NR_IRQS_LEGACY + 55)
-#define MX50_INT_GPIO4_LOW      (NR_IRQS_LEGACY + 56)
-#define MX50_INT_GPIO4_HIGH     (NR_IRQS_LEGACY + 57)
-#define MX50_INT_WDOG1          (NR_IRQS_LEGACY + 58)
-#define MX50_INT_KPP            (NR_IRQS_LEGACY + 60)
-#define MX50_INT_PWM1           (NR_IRQS_LEGACY + 61)
-#define MX50_INT_I2C1           (NR_IRQS_LEGACY + 62)
-#define MX50_INT_I2C2           (NR_IRQS_LEGACY + 63)
-#define MX50_INT_I2C3           (NR_IRQS_LEGACY + 64)
-#define MX50_INT_RESV65         (NR_IRQS_LEGACY + 65)
-#define MX50_INT_DCDC           (NR_IRQS_LEGACY + 66)
-#define MX50_INT_THERMAL_ALARM  (NR_IRQS_LEGACY + 67)
-#define MX50_INT_ANA3           (NR_IRQS_LEGACY + 68)
-#define MX50_INT_ANA4           (NR_IRQS_LEGACY + 69)
-#define MX50_INT_CCM1           (NR_IRQS_LEGACY + 71)
-#define MX50_INT_CCM2           (NR_IRQS_LEGACY + 72)
-#define MX50_INT_GPC1           (NR_IRQS_LEGACY + 73)
-#define MX50_INT_GPC2           (NR_IRQS_LEGACY + 74)
-#define MX50_INT_SRC            (NR_IRQS_LEGACY + 75)
-#define MX50_INT_NM             (NR_IRQS_LEGACY + 76)
-#define MX50_INT_PMU            (NR_IRQS_LEGACY + 77)
-#define MX50_INT_CTI_IRQ        (NR_IRQS_LEGACY + 78)
-#define MX50_INT_CTI1_TG0       (NR_IRQS_LEGACY + 79)
-#define MX50_INT_CTI1_TG1       (NR_IRQS_LEGACY + 80)
-#define MX50_INT_GPU2_IRQ       (NR_IRQS_LEGACY + 84)
-#define MX50_INT_GPU2_BUSY      (NR_IRQS_LEGACY + 85)
-#define MX50_INT_UART5          (NR_IRQS_LEGACY + 86)
-#define MX50_INT_FEC            (NR_IRQS_LEGACY + 87)
-#define MX50_INT_OWIRE          (NR_IRQS_LEGACY + 88)
-#define MX50_INT_CTI1_TG2       (NR_IRQS_LEGACY + 89)
-#define MX50_INT_SJC            (NR_IRQS_LEGACY + 90)
-#define MX50_INT_DCP_CHAN1_3    (NR_IRQS_LEGACY + 91)
-#define MX50_INT_DCP_CHAN0      (NR_IRQS_LEGACY + 92)
-#define MX50_INT_PWM2           (NR_IRQS_LEGACY + 94)
-#define MX50_INT_RNGB           (NR_IRQS_LEGACY + 97)
-#define MX50_INT_CTI1_TG3       (NR_IRQS_LEGACY + 98)
-#define MX50_INT_RAWNAND_BCH    (NR_IRQS_LEGACY + 100)
-#define MX50_INT_RAWNAND_GPMI   (NR_IRQS_LEGACY + 102)
-#define MX50_INT_GPIO5_LOW      (NR_IRQS_LEGACY + 103)
-#define MX50_INT_GPIO5_HIGH     (NR_IRQS_LEGACY + 104)
-#define MX50_INT_GPIO6_LOW      (NR_IRQS_LEGACY + 105)
-#define MX50_INT_GPIO6_HIGH     (NR_IRQS_LEGACY + 106)
-#define MX50_INT_MSHC           (NR_IRQS_LEGACY + 109)
-#define MX50_INT_APBHDMA_CHAN0  (NR_IRQS_LEGACY + 110)
-#define MX50_INT_APBHDMA_CHAN1  (NR_IRQS_LEGACY + 111)
-#define MX50_INT_APBHDMA_CHAN2  (NR_IRQS_LEGACY + 112)
-#define MX50_INT_APBHDMA_CHAN3  (NR_IRQS_LEGACY + 113)
-#define MX50_INT_APBHDMA_CHAN4  (NR_IRQS_LEGACY + 114)
-#define MX50_INT_APBHDMA_CHAN5  (NR_IRQS_LEGACY + 115)
-#define MX50_INT_APBHDMA_CHAN6  (NR_IRQS_LEGACY + 116)
-#define MX50_INT_APBHDMA_CHAN7  (NR_IRQS_LEGACY + 117)
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx50_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX50_H__ */
diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h
index d78298366a91..7dce17a9fe6c 100644
--- a/arch/arm/mach-imx/mxc.h
+++ b/arch/arm/mach-imx/mxc.h
@@ -32,7 +32,6 @@
 #define MXC_CPU_MX27            27
 #define MXC_CPU_MX31            31
 #define MXC_CPU_MX35            35
-#define MXC_CPU_MX50            50
 #define MXC_CPU_MX51            51
 #define MXC_CPU_MX53            53
 
@@ -126,18 +125,6 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()          (0)
 #endif
 
-#ifdef CONFIG_SOC_IMX50
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX50
-# endif
-# define cpu_is_mx50()          (mxc_cpu_type == MXC_CPU_MX50)
-#else
-# define cpu_is_mx50()          (0)
-#endif
-
 #ifdef CONFIG_SOC_IMX51
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type
diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c
index 66fae885c842..b2872ec614a4 100644
--- a/arch/arm/mach-imx/platsmp.c
+++ b/arch/arm/mach-imx/platsmp.c
@@ -12,9 +12,9 @@
 
 #include <linux/init.h>
 #include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
 #include <asm/page.h>
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
@@ -71,8 +71,6 @@ static void __init imx_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 void imx_smp_prepare(void)
diff --git a/arch/arm/mach-imx/pm-imx5.c b/arch/arm/mach-imx/pm-imx5.c
index 2e063c2deb9e..f67fd7ee8127 100644
--- a/arch/arm/mach-imx/pm-imx5.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -34,7 +34,7 @@
 
 /*
  * set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.
+ * mx5 because it can be used for mx51, and mx53.
  */
 static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 {
@@ -85,10 +85,7 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
         __raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
         __raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
         __raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
-        /* Enable NEON SRPG for all but MX50TO1.0. */
-        if (mx50_revision() != IMX_CHIP_REVISION_1_0)
-                __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+        __raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
 
         if (stop_mode) {
                 empgc0 |= MXC_SRPGCR_PCR;
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index f017302f6d09..62769df36db1 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -256,7 +256,6 @@ static struct irqaction mxc_timer_irq = {
 static struct clock_event_device clockevent_mxc = {
         .name           = "mxc_timer1",
         .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .set_mode       = mxc_set_mode,
         .set_next_event = mx1_2_set_next_event,
         .rating         = 200,
@@ -264,21 +263,13 @@ static struct clock_event_device clockevent_mxc = {
 
 static int __init mxc_clockevent_init(struct clk *timer_clk)
 {
-        unsigned int c = clk_get_rate(timer_clk);
-
         if (timer_is_v2())
                 clockevent_mxc.set_next_event = v2_set_next_event;
 
-        clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
-                                        clockevent_mxc.shift);
-        clockevent_mxc.max_delta_ns =
-                        clockevent_delta2ns(0xfffffffe, &clockevent_mxc);
-        clockevent_mxc.min_delta_ns =
-                        clockevent_delta2ns(0xff, &clockevent_mxc);
-
         clockevent_mxc.cpumask = cpumask_of(0);
-
-        clockevents_register_device(&clockevent_mxc);
+        clockevents_config_and_register(&clockevent_mxc,
+                                        clk_get_rate(timer_clk),
+                                        0xff, 0xfffffffe);
 
         return 0;
 }
diff --git a/arch/arm/mach-integrator/include/mach/uncompress.h b/arch/arm/mach-integrator/include/mach/uncompress.h
index 30452f00a164..8f3cc9954c16 100644
--- a/arch/arm/mach-integrator/include/mach/uncompress.h
+++ b/arch/arm/mach-integrator/include/mach/uncompress.h
@@ -46,5 +46,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 592c168f4b62..ea961445e0e9 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -425,7 +425,7 @@ void __init ap_init_early(void)
 
 #ifdef CONFIG_OF
 
-static void __init ap_init_timer_of(void)
+static void __init ap_of_timer_init(void)
 {
         struct device_node *node;
         const char *path;
@@ -464,10 +464,6 @@ static void __init ap_init_timer_of(void)
         integrator_clockevent_init(rate, base, irq);
 }
 
-static struct sys_timer ap_of_timer = {
-        .init           = ap_init_timer_of,
-};
-
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
         { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
         { /* Sentinel */ }
@@ -586,7 +582,7 @@ DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)")
         .init_early     = ap_init_early,
         .init_irq       = ap_init_irq_of,
         .handle_irq     = fpga_handle_irq,
-        .timer          = &ap_of_timer,
+        .init_time      = ap_of_timer_init,
         .init_machine   = ap_init_of,
         .restart        = integrator_restart,
         .dt_compat      = ap_dt_board_compat,
@@ -637,7 +633,7 @@ static struct platform_device cfi_flash_device = {
         .resource       = &cfi_flash_resource,
 };
 
-static void __init ap_init_timer(void)
+static void __init ap_timer_init(void)
 {
         struct clk *clk;
         unsigned long rate;
@@ -656,10 +652,6 @@ static void __init ap_init_timer(void)
                                 IRQ_TIMERINT1);
 }
 
-static struct sys_timer ap_timer = {
-        .init           = ap_init_timer,
-};
-
 #define INTEGRATOR_SC_VALID_INT 0x003fffff
 
 static void __init ap_init_irq(void)
@@ -716,7 +708,7 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator")
         .init_early     = ap_init_early,
         .init_irq       = ap_init_irq,
         .handle_irq     = fpga_handle_irq,
-        .timer          = &ap_timer,
+        .init_time      = ap_timer_init,
         .init_machine   = ap_init,
         .restart        = integrator_restart,
 MACHINE_END
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 01a888d7b0b8..2b0db82a5381 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -251,7 +251,7 @@ static void __init intcp_init_early(void)
 
 #ifdef CONFIG_OF
 
-static void __init intcp_timer_init_of(void)
+static void __init cp_of_timer_init(void)
 {
         struct device_node *node;
         const char *path;
@@ -283,10 +283,6 @@ static void __init intcp_timer_init_of(void)
         sp804_clockevents_init(base, irq, node->name);
 }
 
-static struct sys_timer cp_of_timer = {
-        .init           = intcp_timer_init_of,
-};
-
 static const struct of_device_id fpga_irq_of_match[] __initconst = {
         { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, },
         { /* Sentinel */ }
@@ -390,7 +386,7 @@ DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
         .init_early     = intcp_init_early,
         .init_irq       = intcp_init_irq_of,
         .handle_irq     = fpga_handle_irq,
-        .timer          = &cp_of_timer,
+        .init_time      = cp_of_timer_init,
         .init_machine   = intcp_init_of,
         .restart        = integrator_restart,
         .dt_compat      = intcp_dt_board_compat,
@@ -512,7 +508,7 @@ static void __init intcp_init_irq(void)
 #define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
 #define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
 
-static void __init intcp_timer_init(void)
+static void __init cp_timer_init(void)
 {
         writel(0, TIMER0_VA_BASE + TIMER_CTRL);
         writel(0, TIMER1_VA_BASE + TIMER_CTRL);
@@ -522,10 +518,6 @@ static void __init intcp_timer_init(void)
         sp804_clockevents_init(TIMER1_VA_BASE, IRQ_TIMERINT1, "timer1");
 }
 
-static struct sys_timer cp_timer = {
-        .init           = intcp_timer_init,
-};
-
 #define INTEGRATOR_CP_MMC_IRQS  { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 }
 #define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT }
 
@@ -565,7 +557,7 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
         .init_early     = intcp_init_early,
         .init_irq       = intcp_init_irq,
         .handle_irq     = fpga_handle_irq,
-        .timer          = &cp_timer,
+        .init_time      = cp_timer_init,
         .init_machine   = intcp_init,
         .restart        = integrator_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/include/mach/uncompress.h b/arch/arm/mach-iop13xx/include/mach/uncompress.h
index fa4f80522fad..d3791ece2772 100644
--- a/arch/arm/mach-iop13xx/include/mach/uncompress.h
+++ b/arch/arm/mach-iop13xx/include/mach/uncompress.h
@@ -20,4 +20,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index e3f3e7daa79e..02a8228ac2d3 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -84,17 +84,13 @@ static void __init iq81340mc_timer_init(void)
         iop_init_time(bus_freq);
 }
 
-static struct sys_timer iq81340mc_timer = {
-       .init       = iq81340mc_timer_init,
-};
-
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
         /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
         .atag_offset    = 0x100,
         .init_early     = iop13xx_init_early,
         .map_io         = iop13xx_map_io,
         .init_irq       = iop13xx_init_irq,
-        .timer          = &iq81340mc_timer,
+        .init_time      = iq81340mc_timer_init,
         .init_machine   = iq81340mc_init,
         .restart        = iop13xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index e94744111634..1b80f10722b3 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -86,17 +86,13 @@ static void __init iq81340sc_timer_init(void)
         iop_init_time(bus_freq);
 }
 
-static struct sys_timer iq81340sc_timer = {
-       .init       = iq81340sc_timer_init,
-};
-
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
         /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
         .atag_offset    = 0x100,
         .init_early     = iop13xx_init_early,
         .map_io         = iop13xx_map_io,
         .init_irq       = iop13xx_init_irq,
-        .timer          = &iq81340sc_timer,
+        .init_time      = iq81340sc_timer_init,
         .init_machine   = iq81340sc_init,
         .restart        = iop13xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 9f369f09c29d..31fbb6c61b25 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -40,10 +40,6 @@ static void __init em7210_timer_init(void)
         iop_init_time(200000000);
 }
 
-static struct sys_timer em7210_timer = {
-        .init           = em7210_timer_init,
-};
-
 /*
  * EM7210 RTC
  */
@@ -205,7 +201,7 @@ MACHINE_START(EM7210, "Lanner EM7210")
         .atag_offset    = 0x100,
         .map_io         = em7210_map_io,
         .init_irq       = iop32x_init_irq,
-        .timer          = &em7210_timer,
+        .init_time      = em7210_timer_init,
         .init_machine   = em7210_init_machine,
         .restart        = iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index 02e20c3912ba..ac304705fe68 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -44,10 +44,6 @@ static void __init glantank_timer_init(void)
         iop_init_time(200000000);
 }
 
-static struct sys_timer glantank_timer = {
-        .init           = glantank_timer_init,
-};
-
 
 /*
  * GLAN Tank I/O.
@@ -209,7 +205,7 @@ MACHINE_START(GLANTANK, "GLAN Tank")
         .atag_offset    = 0x100,
         .map_io         = glantank_map_io,
         .init_irq       = iop32x_init_irq,
-        .timer          = &glantank_timer,
+        .init_time      = glantank_timer_init,
         .init_machine   = glantank_init_machine,
         .restart        = iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/include/mach/uncompress.h b/arch/arm/mach-iop32x/include/mach/uncompress.h
index 4fd715496f45..b3d45fd365e7 100644
--- a/arch/arm/mach-iop32x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop32x/include/mach/uncompress.h
@@ -36,4 +36,3 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
  * nothing to do
  */
 #define arch_decomp_setup()     __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index ddd1c7ecfe57..f2cd2966212d 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -75,10 +75,6 @@ static void __init iq31244_timer_init(void)
         }
 }
 
-static struct sys_timer iq31244_timer = {
-        .init           = iq31244_timer_init,
-};
-
 
 /*
  * IQ31244 I/O.
@@ -314,7 +310,7 @@ MACHINE_START(IQ31244, "Intel IQ31244")
         .atag_offset    = 0x100,
         .map_io         = iq31244_map_io,
         .init_irq       = iop32x_init_irq,
-        .timer          = &iq31244_timer,
+        .init_time      = iq31244_timer_init,
         .init_machine   = iq31244_init_machine,
         .restart        = iop3xx_restart,
 MACHINE_END
@@ -329,7 +325,7 @@ MACHINE_START(EP80219, "Intel EP80219")
         .atag_offset    = 0x100,
         .map_io         = iq31244_map_io,
         .init_irq       = iop32x_init_irq,
-        .timer          = &iq31244_timer,
+        .init_time      = iq31244_timer_init,
         .init_machine   = iq31244_init_machine,
         .restart        = iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index bf155e6a3b45..015435de90dd 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -43,10 +43,6 @@ static void __init iq80321_timer_init(void)
         iop_init_time(200000000);
 }
 
-static struct sys_timer iq80321_timer = {
-        .init           = iq80321_timer_init,
-};
-
 
 /*
  * IQ80321 I/O.
@@ -188,7 +184,7 @@ MACHINE_START(IQ80321, "Intel IQ80321")
         .atag_offset    = 0x100,
         .map_io         = iq80321_map_io,
         .init_irq       = iop32x_init_irq,
-        .timer          = &iq80321_timer,
+        .init_time      = iq80321_timer_init,
         .init_machine   = iq80321_init_machine,
         .restart        = iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 5a7ae91e8849..ea0984a7449e 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -50,10 +50,6 @@ static void __init n2100_timer_init(void)
         iop_init_time(198000000);
 }
 
-static struct sys_timer n2100_timer = {
-        .init           = n2100_timer_init,
-};
-
 
 /*
  * N2100 I/O.
@@ -337,7 +333,7 @@ MACHINE_START(N2100, "Thecus N2100")
         .atag_offset    = 0x100,
         .map_io         = n2100_map_io,
         .init_irq       = iop32x_init_irq,
-        .timer          = &n2100_timer,
+        .init_time      = n2100_timer_init,
         .init_machine   = n2100_init_machine,
         .restart        = n2100_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop33x/include/mach/uncompress.h b/arch/arm/mach-iop33x/include/mach/uncompress.h
index f99bb848c5a1..ed282e14176d 100644
--- a/arch/arm/mach-iop33x/include/mach/uncompress.h
+++ b/arch/arm/mach-iop33x/include/mach/uncompress.h
@@ -34,4 +34,3 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
  * nothing to do
  */
 #define arch_decomp_setup()     __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index e74a7debe793..c43304a10fa7 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -45,10 +45,6 @@ static void __init iq80331_timer_init(void)
                 iop_init_time(266000000);
 }
 
-static struct sys_timer iq80331_timer = {
-        .init           = iq80331_timer_init,
-};
-
 
 /*
  * IQ80331 PCI.
@@ -143,7 +139,7 @@ MACHINE_START(IQ80331, "Intel IQ80331")
         .atag_offset    = 0x100,
         .map_io         = iop3xx_map_io,
         .init_irq       = iop33x_init_irq,
-        .timer          = &iq80331_timer,
+        .init_time      = iq80331_timer_init,
         .init_machine   = iq80331_init_machine,
         .restart        = iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index e2f5beece6e8..8192987e78e5 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -45,10 +45,6 @@ static void __init iq80332_timer_init(void)
                 iop_init_time(266000000);
 }
 
-static struct sys_timer iq80332_timer = {
-        .init           = iq80332_timer_init,
-};
-
 
 /*
  * IQ80332 PCI.
@@ -143,7 +139,7 @@ MACHINE_START(IQ80332, "Intel IQ80332")
         .atag_offset    = 0x100,
         .map_io         = iop3xx_map_io,
         .init_irq       = iop33x_init_irq,
-        .timer          = &iq80332_timer,
+        .init_time      = iq80332_timer_init,
         .init_machine   = iq80332_init_machine,
         .restart        = iop3xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 90e42e9982cb..6beec150c060 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = avila_init,
 #if defined(CONFIG_PCI)
@@ -187,7 +187,7 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = avila_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 8c0c0e2d0727..1dbeb7c99d58 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -307,10 +307,6 @@ void __init ixp4xx_timer_init(void)
         ixp4xx_clockevent_init();
 }
 
-struct sys_timer ixp4xx_timer = {
-        .init           = ixp4xx_timer_init,
-};
-
 static struct pxa2xx_udc_mach_info ixp4xx_udc_info;
 
 void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info)
@@ -523,22 +519,15 @@ static struct clock_event_device clockevent_ixp4xx = {
         .name           = "ixp4xx timer1",
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
         .rating         = 200,
-        .shift          = 24,
         .set_mode       = ixp4xx_set_mode,
         .set_next_event = ixp4xx_set_next_event,
 };
 
 static void __init ixp4xx_clockevent_init(void)
 {
-        clockevent_ixp4xx.mult = div_sc(IXP4XX_TIMER_FREQ, NSEC_PER_SEC,
-                                        clockevent_ixp4xx.shift);
-        clockevent_ixp4xx.max_delta_ns =
-                clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx);
-        clockevent_ixp4xx.min_delta_ns =
-                clockevent_delta2ns(0xf, &clockevent_ixp4xx);
         clockevent_ixp4xx.cpumask = cpumask_of(0);
-
-        clockevents_register_device(&clockevent_ixp4xx);
+        clockevents_config_and_register(&clockevent_ixp4xx, IXP4XX_TIMER_FREQ,
+                                        0xf, 0xfffffffe);
 }
 
 void ixp4xx_restart(char mode, const char *cmd)
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index 1b83110028d6..820cae8608fc 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = coyote_init,
 #if defined(CONFIG_PCI)
@@ -132,7 +132,7 @@ MACHINE_START(IXDPG425, "Intel IXDPG425")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = coyote_init,
         .restart        = ixp4xx_restart,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 97a0af8f1955..5d413f8c5700 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -226,10 +226,6 @@ static void __init dsmg600_timer_init(void)
     ixp4xx_timer_init();
 }
 
-static struct sys_timer dsmg600_timer = {
-    .init   = dsmg600_timer_init,
-};
-
 static void __init dsmg600_init(void)
 {
         ixp4xx_sys_init();
@@ -282,7 +278,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &dsmg600_timer,
+        .init_time      = dsmg600_timer_init,
         .init_machine   = dsmg600_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 9175a25a7511..429966b756ed 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -272,7 +272,7 @@ MACHINE_START(FSG, "Freecom FSG-3")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = fsg_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index 033c71758953..3d24b3fcee87 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = gateway7001_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 53b8348dfcc2..e54ff491c105 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -498,7 +498,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = gmlr_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 18ebc6be7969..16a12994fb53 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = gtwx5715_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/include/mach/platform.h b/arch/arm/mach-ixp4xx/include/mach/platform.h
index 5bce94aacca9..db5afb69c123 100644
--- a/arch/arm/mach-ixp4xx/include/mach/platform.h
+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
@@ -89,8 +89,6 @@ struct ixp4xx_pata_data {
         void __iomem    *cs1;
 };
 
-struct sys_timer;
-
 #define IXP4XX_ETH_NPEA         0x00
 #define IXP4XX_ETH_NPEB         0x10
 #define IXP4XX_ETH_NPEC         0x20
@@ -125,7 +123,6 @@ extern void ixp4xx_init_early(void);
 extern void ixp4xx_init_irq(void);
 extern void ixp4xx_sys_init(void);
 extern void ixp4xx_timer_init(void);
-extern struct sys_timer ixp4xx_timer;
 extern void ixp4xx_restart(char, const char *);
 extern void ixp4xx_pci_preinit(void);
 struct pci_sys_data;
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index eb945a926d07..7b25c0225e46 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -53,6 +53,4 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
  */
 #define arch_decomp_setup()     __arch_decomp_setup(arch_id)
 
-#define arch_decomp_wdog()
-
 #endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 108a9d3f382d..22d688b7d513 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -252,7 +252,7 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
@@ -268,7 +268,7 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
@@ -283,7 +283,7 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
@@ -298,7 +298,7 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = ixdp425_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 33cb0955b6bf..ed667ce9f576 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -317,7 +317,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .init_machine   = nas100d_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index e2903faaebb3..7e55236c26ea 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -232,10 +232,6 @@ static void __init nslu2_timer_init(void)
     ixp4xx_timer_init();
 }
 
-static struct sys_timer nslu2_timer = {
-    .init   = nslu2_timer_init,
-};
-
 static void __init nslu2_init(void)
 {
         uint8_t __iomem *f;
@@ -303,7 +299,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &nslu2_timer,
+        .init_time      = nslu2_timer_init,
         .init_machine   = nslu2_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 158ddb79821d..46a89f5e8269 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -245,7 +245,7 @@ MACHINE_START(DEVIXP, "Omicron DEVIXP")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .init_machine   = omixp_init,
         .restart        = ixp4xx_restart,
 MACHINE_END
@@ -257,7 +257,7 @@ MACHINE_START(MICCPT, "Omicron MICCPT")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .init_machine   = omixp_init,
 #if defined(CONFIG_PCI)
         .dma_zone_size  = SZ_64M,
@@ -272,7 +272,7 @@ MACHINE_START(MIC256, "Omicron MIC256")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .init_machine   = omixp_init,
         .restart        = ixp4xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 2798f435aaf4..d42730a1d4ab 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = vulcan_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index a785175b115b..8f9ea2f3a9a5 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2")
         .map_io         = ixp4xx_map_io,
         .init_early     = ixp4xx_init_early,
         .init_irq       = ixp4xx_init_irq,
-        .timer          = &ixp4xx_timer,
+        .init_time      = ixp4xx_timer_init,
         .atag_offset    = 0x100,
         .init_machine   = wg302v2_init,
 #if defined(CONFIG_PCI)
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index de4fd2bb1e27..d4af5c191c24 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -183,7 +183,7 @@ DT_MACHINE_START(KIRKWOOD_DT, "Marvell Kirkwood (Flattened Device Tree)")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = orion_dt_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .init_machine   = kirkwood_dt_init,
         .restart        = kirkwood_restart,
         .dt_compat      = kirkwood_dt_board_compat,
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
index 9f6f496380d8..9a857ae83984 100644
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ b/arch/arm/mach-kirkwood/board-ib62x0.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mv643xx_eth.h>
-#include <linux/input.h>
 #include "common.h"
 
 static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 56bfe5a1605a..3264925b8318 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -14,7 +14,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
         .phy_addr       = MV643XX_ETH_PHY_ADDR(1),
diff --git a/arch/arm/mach-kirkwood/board-nsa310.c b/arch/arm/mach-kirkwood/board-nsa310.c
index f58d2e1a4042..970174ad4a70 100644
--- a/arch/arm/mach-kirkwood/board-nsa310.c
+++ b/arch/arm/mach-kirkwood/board-nsa310.c
@@ -10,12 +10,10 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/i2c.h>
 #include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
+#include <linux/i2c.h>
 #include <mach/kirkwood.h>
+#include <linux/of.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -79,14 +77,10 @@ static void __init nsa310_gpio_init(void)
 
 void __init nsa310_init(void)
 {
-        u32 dev, rev;
-
         kirkwood_mpp_conf(nsa310_mpp_config);
 
         nsa310_gpio_init();
 
-        kirkwood_pcie_id(&dev, &rev);
-
         i2c_register_board_info(0, ARRAY_AND_SIZE(nsa310_i2c_info));
 }
 
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index bac21a554c91..b5ad4dff6b12 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -530,7 +530,7 @@ static int __init kirkwood_find_tclk(void)
         return 166666667;
 }
 
-static void __init kirkwood_timer_init(void)
+void __init kirkwood_timer_init(void)
 {
         kirkwood_tclk = kirkwood_find_tclk();
 
@@ -538,10 +538,6 @@ static void __init kirkwood_timer_init(void)
                         IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
 }
 
-struct sys_timer kirkwood_timer = {
-        .init = kirkwood_timer_init,
-};
-
 /*****************************************************************************
  * Audio
  ****************************************************************************/
diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h
index 5ffa57f08c80..283ab611e8da 100644
--- a/arch/arm/mach-kirkwood/common.h
+++ b/arch/arm/mach-kirkwood/common.h
@@ -156,7 +156,7 @@ void kirkwood_xor1_init(void);
 void kirkwood_crypto_init(void);
 
 extern int kirkwood_tclk;
-extern struct sys_timer kirkwood_timer;
+extern void kirkwood_timer_init(void);
 
 #define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
 
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 2c1a453df201..453418063c1e 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -226,6 +226,6 @@ MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index c49b177c1523..5a369fe74754 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -103,6 +103,6 @@ MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index 791a98fafa29..060ccf9cb63f 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -19,7 +19,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
-#include <linux/platform_data/mmc-mvsdio.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -107,6 +106,6 @@ MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 7cb55f982243..1c6e736cbbf8 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -126,6 +126,6 @@ MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/include/mach/uncompress.h b/arch/arm/mach-kirkwood/include/mach/uncompress.h
index 75d5497df3a8..5bca5534021f 100644
--- a/arch/arm/mach-kirkwood/include/mach/uncompress.h
+++ b/arch/arm/mach-kirkwood/include/mach/uncompress.h
@@ -44,4 +44,3 @@ static void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 6d8364a97810..ba384b992bef 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -167,6 +167,6 @@ MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 728e86d33f0c..3b706611da8e 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -263,7 +263,7 @@ MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
@@ -275,7 +275,7 @@ MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
@@ -287,7 +287,7 @@ MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index a3b091470b8a..913d032cdb19 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -404,7 +404,7 @@ MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
@@ -416,7 +416,7 @@ MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index 7e81e9b586bf..8ddd69fdc937 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -221,7 +221,7 @@ MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
@@ -234,7 +234,7 @@ MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
@@ -247,7 +247,7 @@ MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 19072c84008f..e4fd3129d36f 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -84,6 +84,6 @@ MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 9717101a7437..c7d93b48926b 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -120,6 +120,6 @@ MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 8a175948b28d..55b68fa39f45 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -143,7 +143,7 @@ MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
@@ -155,7 +155,7 @@ MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index f2daf711e72e..8736f8c97518 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -211,6 +211,6 @@ MACHINE_START(T5325, "HP t5325 Thin Client")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 73e2b6ca9564..283abff90228 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -137,6 +137,6 @@ MACHINE_START(TS219, "QNAP TS-119/TS-219")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index e4c61279ea86..81d585806b2f 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -181,6 +181,6 @@ MACHINE_START(TS41X, "QNAP TS-41x")
         .map_io         = kirkwood_map_io,
         .init_early     = kirkwood_init_early,
         .init_irq       = kirkwood_init_irq,
-        .timer          = &kirkwood_timer,
+        .init_time      = kirkwood_timer_init,
         .restart        = kirkwood_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index b0c306ccbc6e..456d6386edf8 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -227,6 +227,6 @@ MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = acs5k_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index e0d36cef2c56..d37c218c3584 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -125,6 +125,6 @@ MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = dsm320_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index a8270725b76d..3acbdfd31391 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -57,6 +57,6 @@ MACHINE_START(KS8695, "KS8695 Centaur Development Board")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = micrel_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
diff --git a/arch/arm/mach-ks8695/board-og.c b/arch/arm/mach-ks8695/board-og.c
index 1623ba461e47..002bc619bb68 100644
--- a/arch/arm/mach-ks8695/board-og.c
+++ b/arch/arm/mach-ks8695/board-og.c
@@ -145,7 +145,7 @@ MACHINE_START(CM4002, "OpenGear/CM4002")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = og_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -157,7 +157,7 @@ MACHINE_START(CM4008, "OpenGear/CM4008")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = og_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -169,7 +169,7 @@ MACHINE_START(CM41XX, "OpenGear/CM41xx")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = og_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -181,7 +181,7 @@ MACHINE_START(IM4004, "OpenGear/IM4004")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = og_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -193,7 +193,7 @@ MACHINE_START(IM42XX, "OpenGear/IM42xx")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = og_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ks8695/board-sg.c b/arch/arm/mach-ks8695/board-sg.c
index f35b98b5bf37..fdf2352d2cf8 100644
--- a/arch/arm/mach-ks8695/board-sg.c
+++ b/arch/arm/mach-ks8695/board-sg.c
@@ -91,7 +91,7 @@ MACHINE_START(LITE300, "SecureComputing/SG300")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = sg_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -103,7 +103,7 @@ MACHINE_START(SG310, "McAfee/SG310")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = sg_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
@@ -115,7 +115,7 @@ MACHINE_START(SE4200, "SecureComputing/SE4200")
         .map_io         = ks8695_map_io,
         .init_irq       = ks8695_init_irq,
         .init_machine   = sg_init,
-        .timer          = &ks8695_timer,
+        .init_time      = ks8695_timer_init,
         .restart        = ks8695_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-ks8695/generic.h b/arch/arm/mach-ks8695/generic.h
index f8bdb11a9c33..6e97ce462d73 100644
--- a/arch/arm/mach-ks8695/generic.h
+++ b/arch/arm/mach-ks8695/generic.h
@@ -13,4 +13,4 @@
 extern __init void ks8695_map_io(void);
 extern __init void ks8695_init_irq(void);
 extern void ks8695_restart(char, const char *);
-extern struct sys_timer ks8695_timer;
+extern void ks8695_timer_init(void);
diff --git a/arch/arm/mach-ks8695/include/mach/uncompress.h b/arch/arm/mach-ks8695/include/mach/uncompress.h
index 8879d610308a..c089a1aea674 100644
--- a/arch/arm/mach-ks8695/include/mach/uncompress.h
+++ b/arch/arm/mach-ks8695/include/mach/uncompress.h
@@ -32,6 +32,5 @@ static inline void flush(void)
 }
 
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-ks8695/time.c b/arch/arm/mach-ks8695/time.c
index 46c84bc7792c..c272a3863d5f 100644
--- a/arch/arm/mach-ks8695/time.c
+++ b/arch/arm/mach-ks8695/time.c
@@ -146,7 +146,7 @@ static void ks8695_timer_setup(void)
                                         0xFFFFFFFFU);
 }
 
-static void __init ks8695_timer_init (void)
+void __init ks8695_timer_init(void)
 {
         ks8695_timer_setup();
 
@@ -154,10 +154,6 @@ static void __init ks8695_timer_init (void)
         setup_irq(KS8695_IRQ_TIMER1, &ks8695_timer_irq);
 }
 
-struct sys_timer ks8695_timer = {
-        .init           = ks8695_timer_init,
-};
-
 void ks8695_restart(char mode, const char *cmd)
 {
         unsigned int reg;
diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h
index afeac3b1fae6..e0b26062a272 100644
--- a/arch/arm/mach-lpc32xx/common.h
+++ b/arch/arm/mach-lpc32xx/common.h
@@ -25,7 +25,7 @@
 /*
  * Other arch specific structures and functions
  */
-extern struct sys_timer lpc32xx_timer;
+extern void lpc32xx_timer_init(void);
 extern void __init lpc32xx_init_irq(void);
 extern void __init lpc32xx_map_io(void);
 extern void __init lpc32xx_serial_init(void);
diff --git a/arch/arm/mach-lpc32xx/include/mach/uncompress.h b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
index c142487d299a..1198a89183cd 100644
--- a/arch/arm/mach-lpc32xx/include/mach/uncompress.h
+++ b/arch/arm/mach-lpc32xx/include/mach/uncompress.h
@@ -55,6 +55,5 @@ static inline void flush(void)
 
 /* NULL functions; we don't presently need them */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index e8ff4c3f0566..c1cd5a943ab1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -263,7 +263,7 @@ DT_MACHINE_START(LPC32XX_DT, "LPC32XX SoC (Flattened Device Tree)")
         .atag_offset    = 0x100,
         .map_io         = lpc32xx_map_io,
         .init_irq       = lpc32xx_init_irq,
-        .timer          = &lpc32xx_timer,
+        .init_time      = lpc32xx_timer_init,
         .init_machine   = lpc3250_machine_init,
         .dt_compat      = lpc32xx_dt_compat,
         .restart        = lpc23xx_restart,
diff --git a/arch/arm/mach-lpc32xx/timer.c b/arch/arm/mach-lpc32xx/timer.c
index c40667c33161..20eab63d10ba 100644
--- a/arch/arm/mach-lpc32xx/timer.c
+++ b/arch/arm/mach-lpc32xx/timer.c
@@ -70,7 +70,6 @@ static void lpc32xx_clkevt_mode(enum clock_event_mode mode,
 static struct clock_event_device lpc32xx_clkevt = {
         .name           = "lpc32xx_clkevt",
         .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .rating         = 300,
         .set_next_event = lpc32xx_clkevt_next_event,
         .set_mode       = lpc32xx_clkevt_mode,
@@ -100,7 +99,7 @@ static struct irqaction lpc32xx_timer_irq = {
  * clocks need to be enabled here manually and then tagged as used in
  * the clock driver initialization
  */
-static void __init lpc32xx_timer_init(void)
+void __init lpc32xx_timer_init(void)
 {
         u32 clkrate, pllreg;
 
@@ -141,14 +140,8 @@ static void __init lpc32xx_timer_init(void)
         setup_irq(IRQ_LPC32XX_TIMER0, &lpc32xx_timer_irq);
 
         /* Setup the clockevent structure. */
-        lpc32xx_clkevt.mult = div_sc(clkrate, NSEC_PER_SEC,
-                lpc32xx_clkevt.shift);
-        lpc32xx_clkevt.max_delta_ns = clockevent_delta2ns(-1,
-                &lpc32xx_clkevt);
-        lpc32xx_clkevt.min_delta_ns = clockevent_delta2ns(1,
-                &lpc32xx_clkevt) + 1;
         lpc32xx_clkevt.cpumask = cpumask_of(0);
-        clockevents_register_device(&lpc32xx_clkevt);
+        clockevents_config_and_register(&lpc32xx_clkevt, clkrate, 1, -1);
 
         /* Use timer1 as clock source. */
         __raw_writel(LPC32XX_TIMER_CNTR_TCR_RESET,
@@ -161,8 +154,3 @@ static void __init lpc32xx_timer_init(void)
         clocksource_mmio_init(LPC32XX_TIMER_TC(LPC32XX_TIMER1_BASE),
                 "lpc32xx_clksrc", clkrate, 300, 32, clocksource_mmio_readl_up);
 }
-
-struct sys_timer lpc32xx_timer = {
-        .init           = &lpc32xx_timer_init,
-};
-
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index e5dba9c5dc54..9f64d5632e07 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -262,7 +262,7 @@ MACHINE_START(ASPENITE, "PXA168-based Aspenite Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = MMP_NR_IRQS,
         .init_irq       = pxa168_init_irq,
-        .timer          = &pxa168_timer,
+        .init_time      = pxa168_timer_init,
         .init_machine   = common_init,
         .restart        = pxa168_restart,
 MACHINE_END
@@ -271,7 +271,7 @@ MACHINE_START(ZYLONITE2, "PXA168-based Zylonite2 Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = MMP_NR_IRQS,
         .init_irq       = pxa168_init_irq,
-        .timer          = &pxa168_timer,
+        .init_time      = pxa168_timer_init,
         .init_machine   = common_init,
         .restart        = pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 603542ae6fbd..1f94957b56ae 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -45,7 +45,7 @@ MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = MMP_NR_IRQS,
         .init_irq       = pxa168_init_irq,
-        .timer          = &pxa168_timer,
+        .init_time      = pxa168_timer_init,
         .init_machine   = avengers_lite_init,
         .restart        = pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 5cb769cd26d9..2358011c7d8e 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -218,7 +218,7 @@ MACHINE_START(BROWNSTONE, "Brownstone Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = BROWNSTONE_NR_IRQS,
         .init_irq       = mmp2_init_irq,
-        .timer          = &mmp2_timer,
+        .init_time      = mmp2_timer_init,
         .init_machine   = brownstone_init,
         .restart        = mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/common.h b/arch/arm/mach-mmp/common.h
index bd453274fca2..0bdc50b134ce 100644
--- a/arch/arm/mach-mmp/common.h
+++ b/arch/arm/mach-mmp/common.h
@@ -1,7 +1,5 @@
 #define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
 
-struct sys_timer;
-
 extern void timer_init(int irq);
 
 extern void __init icu_init_irq(void);
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index 8059cc0905c6..754c352dd02b 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -121,7 +121,7 @@ MACHINE_START(FLINT, "Flint Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = FLINT_NR_IRQS,
         .init_irq       = mmp2_init_irq,
-        .timer          = &mmp2_timer,
+        .init_time      = mmp2_timer_init,
         .init_machine   = flint_init,
         .restart        = mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 5c3d61ee729a..d1e2d595e79c 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -194,7 +194,7 @@ MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = MMP_NR_IRQS,
         .init_irq       = pxa168_init_irq,
-        .timer          = &pxa168_timer,
+        .init_time      = pxa168_timer_init,
         .init_machine   = gplugd_init,
         .restart        = pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index c4ca4d17194a..0764f4ecec82 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -3,9 +3,7 @@
 
 #include <linux/platform_data/pxa_sdhci.h>
 
-struct sys_timer;
-
-extern struct sys_timer mmp2_timer;
+extern void mmp2_timer_init(void);
 extern void __init mmp2_init_icu(void);
 extern void __init mmp2_init_irq(void);
 extern void mmp2_clear_pmic_int(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 37632d964d50..7ed1df21ea1c 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -1,9 +1,7 @@
 #ifndef __ASM_MACH_PXA168_H
 #define __ASM_MACH_PXA168_H
 
-struct sys_timer;
-
-extern struct sys_timer pxa168_timer;
+extern void pxa168_timer_init(void);
 extern void __init pxa168_init_irq(void);
 extern void pxa168_restart(char, const char *);
 extern void pxa168_clear_keypad_wakeup(void);
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 3b58a3b2d7df..eff31ab6dc3b 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -1,9 +1,7 @@
 #ifndef __ASM_MACH_PXA910_H
 #define __ASM_MACH_PXA910_H
 
-struct sys_timer;
-
-extern struct sys_timer pxa910_timer;
+extern void pxa910_timer_init(void);
 extern void __init pxa910_init_irq(void);
 
 #include <linux/i2c.h>
diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h
index d6daeb7e4ef1..8890fa8fa771 100644
--- a/arch/arm/mach-mmp/include/mach/uncompress.h
+++ b/arch/arm/mach-mmp/include/mach/uncompress.h
@@ -43,9 +43,3 @@ static inline void arch_decomp_setup(void)
         if (machine_is_avengers_lite())
                 UART = (unsigned long *)UART3_BASE;
 }
-
-/*
- * nothing to do
- */
-
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index ff73249884d0..66634fd0ecb0 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -174,7 +174,7 @@ MACHINE_START(MARVELL_JASPER, "Jasper Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = JASPER_NR_IRQS,
         .init_irq       = mmp2_init_irq,
-        .timer          = &mmp2_timer,
+        .init_time      = mmp2_timer_init,
         .init_machine   = jasper_init,
         .restart        = mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp-dt.c b/arch/arm/mach-mmp/mmp-dt.c
index 033cc31b3c72..d063efa0a4f1 100644
--- a/arch/arm/mach-mmp/mmp-dt.c
+++ b/arch/arm/mach-mmp/mmp-dt.c
@@ -22,10 +22,6 @@
 extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
-static struct sys_timer mmp_dt_timer = {
-        .init   = mmp_dt_init_timer,
-};
-
 static const struct of_dev_auxdata pxa168_auxdata_lookup[] __initconst = {
         OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.0", NULL),
         OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4018000, "pxa2xx-uart.1", NULL),
@@ -69,7 +65,7 @@ static const char *mmp_dt_board_compat[] __initdata = {
 DT_MACHINE_START(PXA168_DT, "Marvell PXA168 (Device Tree Support)")
         .map_io         = mmp_map_io,
         .init_irq       = mmp_dt_irq_init,
-        .timer          = &mmp_dt_timer,
+        .init_time      = mmp_dt_init_timer,
         .init_machine   = pxa168_dt_init,
         .dt_compat      = mmp_dt_board_compat,
 MACHINE_END
@@ -77,7 +73,7 @@ MACHINE_END
 DT_MACHINE_START(PXA910_DT, "Marvell PXA910 (Device Tree Support)")
         .map_io         = mmp_map_io,
         .init_irq       = mmp_dt_irq_init,
-        .timer          = &mmp_dt_timer,
+        .init_time      = mmp_dt_init_timer,
         .init_machine   = pxa910_dt_init,
         .dt_compat      = mmp_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2-dt.c b/arch/arm/mach-mmp/mmp2-dt.c
index 535a5ed5977b..fad431aa6e09 100644
--- a/arch/arm/mach-mmp/mmp2-dt.c
+++ b/arch/arm/mach-mmp/mmp2-dt.c
@@ -24,10 +24,6 @@
 extern void __init mmp_dt_irq_init(void);
 extern void __init mmp_dt_init_timer(void);
 
-static struct sys_timer mmp_dt_timer = {
-        .init   = mmp_dt_init_timer,
-};
-
 static const struct of_dev_auxdata mmp2_auxdata_lookup[] __initconst = {
         OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4030000, "pxa2xx-uart.0", NULL),
         OF_DEV_AUXDATA("mrvl,mmp-uart", 0xd4017000, "pxa2xx-uart.1", NULL),
@@ -54,7 +50,7 @@ static const char *mmp2_dt_board_compat[] __initdata = {
 DT_MACHINE_START(MMP2_DT, "Marvell MMP2 (Device Tree Support)")
         .map_io         = mmp_map_io,
         .init_irq       = mmp_dt_irq_init,
-        .timer          = &mmp_dt_timer,
+        .init_time      = mmp_dt_init_timer,
         .init_machine   = mmp2_dt_init,
         .dt_compat      = mmp2_dt_board_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 3a3768c7a191..d94d114eef7b 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -114,7 +114,7 @@ postcore_initcall(mmp2_init);
 
 #define APBC_TIMERS     APBC_REG(0x024)
 
-static void __init mmp2_timer_init(void)
+void __init mmp2_timer_init(void)
 {
         unsigned long clk_rst;
 
@@ -130,10 +130,6 @@ static void __init mmp2_timer_init(void)
         timer_init(IRQ_MMP2_TIMER1);
 }
 
-struct sys_timer mmp2_timer = {
-        .init   = mmp2_timer_init,
-};
-
 /* on-chip devices */
 MMP2_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4030000, 0x30, 4, 5);
 MMP2_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4017000, 0x30, 20, 21);
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index b7f074f15498..9bc7b86a86a7 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -67,7 +67,7 @@ postcore_initcall(pxa168_init);
 #define TIMER_CLK_RST   (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
 #define APBC_TIMERS     APBC_REG(0x34)
 
-static void __init pxa168_timer_init(void)
+void __init pxa168_timer_init(void)
 {
         /* this is early, we have to initialize the CCU registers by
          * ourselves instead of using clk_* API. Clock rate is defined
@@ -81,10 +81,6 @@ static void __init pxa168_timer_init(void)
         timer_init(IRQ_PXA168_TIMER1);
 }
 
-struct sys_timer pxa168_timer = {
-        .init   = pxa168_timer_init,
-};
-
 void pxa168_clear_keypad_wakeup(void)
 {
         uint32_t val;
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 8b1e16fbb7a5..c6a89f1eca4e 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -101,7 +101,7 @@ postcore_initcall(pxa910_init);
 #define TIMER_CLK_RST   (APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3))
 #define APBC_TIMERS     APBC_REG(0x34)
 
-static void __init pxa910_timer_init(void)
+void __init pxa910_timer_init(void)
 {
         /* reset and configure */
         __raw_writel(APBC_APBCLK | APBC_RST, APBC_TIMERS);
@@ -110,10 +110,6 @@ static void __init pxa910_timer_init(void)
         timer_init(IRQ_PXA910_AP1_TIMER1);
 }
 
-struct sys_timer pxa910_timer = {
-        .init   = pxa910_timer_init,
-};
-
 /* on-chip devices */
 
 /* NOTE: there are totally 3 UARTs on PXA910:
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index b28f9084dfff..4c127d23955d 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -103,7 +103,7 @@ MACHINE_START(TAVOREVB, "PXA910 Evaluation Board (aka TavorEVB)")
         .map_io         = mmp_map_io,
         .nr_irqs        = MMP_NR_IRQS,
         .init_irq       = pxa910_init_irq,
-        .timer          = &pxa910_timer,
+        .init_time      = pxa910_timer_init,
         .init_machine   = tavorevb_init,
         .restart        = mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index dd30ea74785c..8609967975ed 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -86,7 +86,7 @@ MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = MMP_NR_IRQS,
         .init_irq       = pxa168_init_irq,
-        .timer          = &pxa168_timer,
+        .init_time      = pxa168_timer_init,
         .init_machine   = teton_bga_init,
         .restart        = pxa168_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c
index 936447c70977..86a18b3d252e 100644
--- a/arch/arm/mach-mmp/time.c
+++ b/arch/arm/mach-mmp/time.c
@@ -141,7 +141,6 @@ static void timer_set_mode(enum clock_event_mode mode,
 static struct clock_event_device ckevt = {
         .name           = "clockevent",
         .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .rating         = 200,
         .set_next_event = timer_set_next_event,
         .set_mode       = timer_set_mode,
@@ -198,15 +197,13 @@ void __init timer_init(int irq)
 
         setup_sched_clock(mmp_read_sched_clock, 32, CLOCK_TICK_RATE);
 
-        ckevt.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC, ckevt.shift);
-        ckevt.max_delta_ns = clockevent_delta2ns(MAX_DELTA, &ckevt);
-        ckevt.min_delta_ns = clockevent_delta2ns(MIN_DELTA, &ckevt);
         ckevt.cpumask = cpumask_of(0);
 
         setup_irq(irq, &timer_irq);
 
         clocksource_register_hz(&cksrc, CLOCK_TICK_RATE);
-        clockevents_register_device(&ckevt);
+        clockevents_config_and_register(&ckevt, CLOCK_TICK_RATE,
+                                        MIN_DELTA, MAX_DELTA);
 }
 
 #ifdef CONFIG_OF
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index ce55fd8821c4..6e474900b13e 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -218,7 +218,7 @@ MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
         .map_io         = mmp_map_io,
         .nr_irqs        = TTCDKB_NR_IRQS,
         .init_irq       = pxa910_init_irq,
-        .timer          = &pxa910_timer,
+        .init_time      = pxa910_timer_init,
         .init_machine   = ttc_dkb_init,
         .restart        = mmp_restart,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8660.c b/arch/arm/mach-msm/board-dt-8660.c
index b5b4de2cdf9e..7dcfc5300bbd 100644
--- a/arch/arm/mach-msm/board-dt-8660.c
+++ b/arch/arm/mach-msm/board-dt-8660.c
@@ -11,26 +11,15 @@
  */
 
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/board.h>
 #include "common.h"
 
-static const struct of_device_id msm_dt_gic_match[] __initconst = {
-        { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
-        {}
-};
-
-static void __init msm8x60_init_irq(void)
-{
-        of_irq_init(msm_dt_gic_match);
-}
-
 static void __init msm8x60_init_late(void)
 {
         smd_debugfs_init();
@@ -55,10 +44,9 @@ static const char *msm8x60_fluid_match[] __initdata = {
 DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
         .smp = smp_ops(msm_smp_ops),
         .map_io = msm_map_msm8x60_io,
-        .init_irq = msm8x60_init_irq,
-        .handle_irq = gic_handle_irq,
+        .init_irq = irqchip_init,
         .init_machine = msm8x60_dt_init,
         .init_late = msm8x60_init_late,
-        .timer = &msm_dt_timer,
+        .init_time      = msm_dt_timer_init,
         .dt_compat = msm8x60_fluid_match,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-dt-8960.c b/arch/arm/mach-msm/board-dt-8960.c
index 4490edb71c17..73019363ffa4 100644
--- a/arch/arm/mach-msm/board-dt-8960.c
+++ b/arch/arm/mach-msm/board-dt-8960.c
@@ -11,24 +11,13 @@
  */
 
 #include <linux/init.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
 #include "common.h"
 
-static const struct of_device_id msm_dt_gic_match[] __initconst = {
-        { .compatible = "qcom,msm-qgic2", .data = gic_of_init },
-        { }
-};
-
-static void __init msm_dt_init_irq(void)
-{
-        of_irq_init(msm_dt_gic_match);
-}
-
 static void __init msm_dt_init(void)
 {
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -42,9 +31,8 @@ static const char * const msm8960_dt_match[] __initconst = {
 DT_MACHINE_START(MSM8960_DT, "Qualcomm MSM (Flattened Device Tree)")
         .smp = smp_ops(msm_smp_ops),
         .map_io = msm_map_msm8960_io,
-        .init_irq = msm_dt_init_irq,
-        .timer = &msm_dt_timer,
+        .init_irq = irqchip_init,
+        .init_time      = msm_dt_timer_init,
         .init_machine = msm_dt_init,
         .dt_compat = msm8960_dt_match,
-        .handle_irq = gic_handle_irq,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 6ce542e2e21c..84d720af34ab 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -106,5 +106,5 @@ MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
         .init_irq       = halibut_init_irq,
         .init_machine   = halibut_init,
         .init_late      = halibut_init_late,
-        .timer          = &msm7x01_timer,
+        .init_time      = msm7x01_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index df00bc03ce74..30c3496db593 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -75,7 +75,7 @@ static void __init mahimahi_init_late(void)
         smd_debugfs_init();
 }
 
-extern struct sys_timer msm_timer;
+void msm_timer_init(void);
 
 MACHINE_START(MAHIMAHI, "mahimahi")
         .atag_offset    = 0x100,
@@ -84,5 +84,5 @@ MACHINE_START(MAHIMAHI, "mahimahi")
         .init_irq       = msm_init_irq,
         .init_machine   = mahimahi_init,
         .init_late      = mahimahi_init_late,
-        .timer          = &msm_timer,
+        .init_time      = msm_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index effa6f4336c7..7bc3f82e3ec9 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -131,7 +131,7 @@ MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
         .init_irq = msm7x30_init_irq,
         .init_machine = msm7x30_init,
         .init_late = msm7x30_init_late,
-        .timer = &msm7x30_timer,
+        .init_time      = msm7x30_timer_init,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
@@ -142,7 +142,7 @@ MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
         .init_irq = msm7x30_init_irq,
         .init_machine = msm7x30_init,
         .init_late = msm7x30_init_late,
-        .timer = &msm7x30_timer,
+        .init_time      = msm7x30_timer_init,
 MACHINE_END
 
 MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
@@ -153,5 +153,5 @@ MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
         .init_irq = msm7x30_init_irq,
         .init_machine = msm7x30_init,
         .init_late = msm7x30_init_late,
-        .timer = &msm7x30_timer,
+        .init_time      = msm7x30_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 2448fcf09eb1..686e7949a73a 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -200,7 +200,7 @@ MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
         .init_irq = qsd8x50_init_irq,
         .init_machine = qsd8x50_init,
         .init_late = qsd8x50_init_late,
-        .timer = &qsd8x50_timer,
+        .init_time      = qsd8x50_timer_init,
 MACHINE_END
 
 MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
@@ -209,5 +209,5 @@ MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
         .init_irq = qsd8x50_init_irq,
         .init_machine = qsd8x50_init,
         .init_late = qsd8x50_init_late,
-        .timer = &qsd8x50_timer,
+        .init_time      = qsd8x50_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index b7b0fc7e3278..70730111b37c 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -53,7 +53,7 @@ static struct platform_device *devices[] __initdata = {
         &msm_device_uart3,
 };
 
-extern struct sys_timer msm_timer;
+void msm_timer_init(void);
 
 static void __init sapphire_init_irq(void)
 {
@@ -113,5 +113,5 @@ MACHINE_START(SAPPHIRE, "sapphire")
         .init_irq       = sapphire_init_irq,
         .init_machine   = sapphire_init,
         .init_late      = sapphire_init_late,
-        .timer          = &msm_timer,
+        .init_time      = msm_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 4ba0800e243e..919bfa32871a 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -110,5 +110,5 @@ MACHINE_START(TROUT, "HTC Dream")
         .init_irq       = trout_init_irq,
         .init_machine   = trout_init,
         .init_late      = trout_init_late,
-        .timer          = &msm7x01_timer,
+        .init_time      = msm7x01_timer_init,
 MACHINE_END
diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
index 633a7159d5ff..ce8215a269e5 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -12,10 +12,10 @@
 #ifndef __MACH_COMMON_H
 #define __MACH_COMMON_H
 
-extern struct sys_timer msm7x01_timer;
-extern struct sys_timer msm7x30_timer;
-extern struct sys_timer msm_dt_timer;
-extern struct sys_timer qsd8x50_timer;
+extern void msm7x01_timer_init(void);
+extern void msm7x30_timer_init(void);
+extern void msm_dt_timer_init(void);
+extern void qsd8x50_timer_init(void);
 
 extern void msm_map_common_io(void);
 extern void msm_map_msm7x30_io(void);
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index c14011fe832d..fa97a10d8695 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -60,8 +60,4 @@ static inline void arch_decomp_setup(void)
 {
 }
 
-static inline void arch_decomp_wdog(void)
-{
-}
-
 #endif
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 7ed69b69c87c..42932865416a 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -15,8 +15,8 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/cacheflush.h>
 #include <asm/cputype.h>
 #include <asm/mach-types.h>
@@ -115,7 +115,7 @@ static int __cpuinit msm_boot_secondary(unsigned int cpu, struct task_struct *id
          * the boot monitor to read the system wide flags register,
          * and branch to the address found there.
          */
-        gic_raise_softirq(cpumask_of(cpu), 0);
+        arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
         timeout = jiffies + (1 * HZ);
         while (time_before(jiffies, timeout)) {
@@ -153,8 +153,6 @@ static void __init msm_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 476549a8a709..2969027f02fa 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -25,7 +25,6 @@
 #include <linux/of_irq.h>
 
 #include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
 #include <asm/localtimer.h>
 #include <asm/sched_clock.h>
 
@@ -144,13 +143,9 @@ static int __cpuinit msm_local_timer_setup(struct clock_event_device *evt)
         evt->rating = msm_clockevent.rating;
         evt->set_mode = msm_timer_set_mode;
         evt->set_next_event = msm_timer_set_next_event;
-        evt->shift = msm_clockevent.shift;
-        evt->mult = div_sc(GPT_HZ, NSEC_PER_SEC, evt->shift);
-        evt->max_delta_ns = clockevent_delta2ns(0xf0000000, evt);
-        evt->min_delta_ns = clockevent_delta2ns(4, evt);
 
         *__this_cpu_ptr(msm_evt.percpu_evt) = evt;
-        clockevents_register_device(evt);
+        clockevents_config_and_register(evt, GPT_HZ, 4, 0xf0000000);
         enable_percpu_irq(evt->irq, IRQ_TYPE_EDGE_RISING);
         return 0;
 }
@@ -229,7 +224,7 @@ static const struct of_device_id msm_gpt_match[] __initconst = {
         { },
 };
 
-static void __init msm_dt_timer_init(void)
+void __init msm_dt_timer_init(void)
 {
         struct device_node *np;
         u32 freq;
@@ -296,10 +291,6 @@ static void __init msm_dt_timer_init(void)
 
         msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
-
-struct sys_timer msm_dt_timer = {
-        .init = msm_dt_timer_init
-};
 #endif
 
 static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
@@ -317,7 +308,7 @@ static int __init msm_timer_map(phys_addr_t event, phys_addr_t source)
         return 0;
 }
 
-static void __init msm7x01_timer_init(void)
+void __init msm7x01_timer_init(void)
 {
         struct clocksource *cs = &msm_clocksource;
 
@@ -330,28 +321,16 @@ static void __init msm7x01_timer_init(void)
                         false);
 }
 
-struct sys_timer msm7x01_timer = {
-        .init = msm7x01_timer_init
-};
-
-static void __init msm7x30_timer_init(void)
+void __init msm7x30_timer_init(void)
 {
         if (msm_timer_map(0xc0100004, 0xc0100024))
                 return;
         msm_timer_init(24576000 / 4, 32, 1, false);
 }
 
-struct sys_timer msm7x30_timer = {
-        .init = msm7x30_timer_init
-};
-
-static void __init qsd8x50_timer_init(void)
+void __init qsd8x50_timer_init(void)
 {
         if (msm_timer_map(0xAC100000, 0xAC100010))
                 return;
         msm_timer_init(19200000 / 4, 32, 7, false);
 }
-
-struct sys_timer qsd8x50_timer = {
-        .init = qsd8x50_timer_init
-};
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index ee74ec97c141..1f2ef98b37c6 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -150,6 +150,6 @@ MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
         .map_io         = mv78xx0_map_io,
         .init_early     = mv78xx0_init_early,
         .init_irq       = mv78xx0_init_irq,
-        .timer          = &mv78xx0_timer,
+        .init_time      = mv78xx0_timer_init,
         .restart        = mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index d0cb4857b4b3..0efa14498ebc 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -336,16 +336,12 @@ void __init mv78xx0_init_early(void)
         orion_time_set_base(TIMER_VIRT_BASE);
 }
 
-static void __init_refok mv78xx0_timer_init(void)
+void __init_refok mv78xx0_timer_init(void)
 {
         orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
                         IRQ_MV78XX0_TIMER_1, get_tclk());
 }
 
-struct sys_timer mv78xx0_timer = {
-        .init = mv78xx0_timer_init,
-};
-
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-mv78xx0/common.h b/arch/arm/mach-mv78xx0/common.h
index 507c767d49e0..5e9485bad0ac 100644
--- a/arch/arm/mach-mv78xx0/common.h
+++ b/arch/arm/mach-mv78xx0/common.h
@@ -47,7 +47,7 @@ void mv78xx0_uart3_init(void);
 void mv78xx0_i2c_init(void);
 void mv78xx0_restart(char, const char *);
 
-extern struct sys_timer mv78xx0_timer;
+extern void mv78xx0_timer_init(void);
 
 
 #endif
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index 4d6d48bf51ef..4e0f22b30bc8 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -98,6 +98,6 @@ MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
         .map_io         = mv78xx0_map_io,
         .init_early     = mv78xx0_init_early,
         .init_irq       = mv78xx0_init_irq,
-        .timer          = &mv78xx0_timer,
+        .init_time      = mv78xx0_timer_init,
         .restart        = mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mv78xx0/include/mach/uncompress.h b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
index 365264298e79..6a761c44a296 100644
--- a/arch/arm/mach-mv78xx0/include/mach/uncompress.h
+++ b/arch/arm/mach-mv78xx0/include/mach/uncompress.h
@@ -44,4 +44,3 @@ static void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index 9a882706e138..d2d06f3957f3 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -83,6 +83,6 @@ MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
         .map_io         = mv78xx0_map_io,
         .init_early     = mv78xx0_init_early,
         .init_irq       = mv78xx0_init_irq,
-        .timer          = &mv78xx0_timer,
+        .init_time      = mv78xx0_timer_init,
         .restart        = mv78xx0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-mvebu/armada-370-xp.c b/arch/arm/mach-mvebu/armada-370-xp.c
index 7434b5e36197..a5ea616d6d12 100644
--- a/arch/arm/mach-mvebu/armada-370-xp.c
+++ b/arch/arm/mach-mvebu/armada-370-xp.c
@@ -56,10 +56,6 @@ void __init armada_370_xp_init_early(void)
         init_dma_coherent_pool_size(SZ_1M);
 }
 
-struct sys_timer armada_370_xp_timer = {
-        .init           = armada_370_xp_timer_and_clk_init,
-};
-
 static void __init armada_370_xp_dt_init(void)
 {
         of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -78,7 +74,7 @@ DT_MACHINE_START(ARMADA_XP_DT, "Marvell Armada 370/XP (Device Tree)")
         .init_early     = armada_370_xp_init_early,
         .init_irq       = armada_370_xp_init_irq,
         .handle_irq     = armada_370_xp_handle_irq,
-        .timer          = &armada_370_xp_timer,
+        .init_time      = armada_370_xp_timer_and_clk_init,
         .restart        = mvebu_restart,
         .dt_compat      = armada_370_xp_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index ef2811495446..533f5186e200 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -72,6 +72,5 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 }
 
 #define arch_decomp_setup()     __arch_decomp_setup(arch_id)
-#define arch_decomp_wdog()
 
 #endif /* __MACH_MXS_UNCOMPRESS_H__ */
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index c66129b5dd18..5fad7cefe8aa 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -163,19 +163,11 @@ static void __init imx23_timer_init(void)
         mx23_clocks_init();
 }
 
-static struct sys_timer imx23_timer = {
-        .init = imx23_timer_init,
-};
-
 static void __init imx28_timer_init(void)
 {
         mx28_clocks_init();
 }
 
-static struct sys_timer imx28_timer = {
-        .init = imx28_timer_init,
-};
-
 enum mac_oui {
         OUI_FSL,
         OUI_DENX,
@@ -446,7 +438,7 @@ DT_MACHINE_START(IMX23, "Freescale i.MX23 (Device Tree)")
         .map_io         = mx23_map_io,
         .init_irq       = icoll_init_irq,
         .handle_irq     = icoll_handle_irq,
-        .timer          = &imx23_timer,
+        .init_time      = imx23_timer_init,
         .init_machine   = mxs_machine_init,
         .dt_compat      = imx23_dt_compat,
         .restart        = mxs_restart,
@@ -456,7 +448,7 @@ DT_MACHINE_START(IMX28, "Freescale i.MX28 (Device Tree)")
         .map_io         = mx28_map_io,
         .init_irq       = icoll_init_irq,
         .handle_irq     = icoll_handle_irq,
-        .timer          = &imx28_timer,
+        .init_time      = imx28_timer_init,
         .init_machine   = mxs_machine_init,
         .dt_compat      = imx28_dt_compat,
         .restart        = mxs_restart,
diff --git a/arch/arm/mach-mxs/timer.c b/arch/arm/mach-mxs/timer.c
index 856f4c796061..27451b1ba3f1 100644
--- a/arch/arm/mach-mxs/timer.c
+++ b/arch/arm/mach-mxs/timer.c
@@ -195,7 +195,6 @@ static void mxs_set_mode(enum clock_event_mode mode,
 static struct clock_event_device mxs_clockevent_device = {
         .name           = "mxs_timrot",
         .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .set_mode       = mxs_set_mode,
         .set_next_event = timrotv2_set_next_event,
         .rating         = 200,
@@ -203,25 +202,12 @@ static struct clock_event_device mxs_clockevent_device = {
 
 static int __init mxs_clockevent_init(struct clk *timer_clk)
 {
-        unsigned int c = clk_get_rate(timer_clk);
-
-        mxs_clockevent_device.mult =
-                div_sc(c, NSEC_PER_SEC, mxs_clockevent_device.shift);
-        mxs_clockevent_device.cpumask = cpumask_of(0);
-        if (timrot_is_v1()) {
+        if (timrot_is_v1())
                 mxs_clockevent_device.set_next_event = timrotv1_set_next_event;
-                mxs_clockevent_device.max_delta_ns =
-                        clockevent_delta2ns(0xfffe, &mxs_clockevent_device);
-                mxs_clockevent_device.min_delta_ns =
-                        clockevent_delta2ns(0xf, &mxs_clockevent_device);
-        } else {
-                mxs_clockevent_device.max_delta_ns =
-                        clockevent_delta2ns(0xfffffffe, &mxs_clockevent_device);
-                mxs_clockevent_device.min_delta_ns =
-                        clockevent_delta2ns(0xf, &mxs_clockevent_device);
-        }
-
-        clockevents_register_device(&mxs_clockevent_device);
+        mxs_clockevent_device.cpumask = cpumask_of(0);
+        clockevents_config_and_register(&mxs_clockevent_device,
+                                        clk_get_rate(timer_clk), 0xf,
+                                        timrot_is_v1() ? 0xfffe : 0xfffffffe);
 
         return 0;
 }
diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c
index aa627465d914..27c2cb7ab813 100644
--- a/arch/arm/mach-netx/generic.c
+++ b/arch/arm/mach-netx/generic.c
@@ -23,9 +23,9 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <asm/mach/irq.h>
 
diff --git a/arch/arm/mach-netx/generic.h b/arch/arm/mach-netx/generic.h
index 9b915119b8d6..768b26bbb42b 100644
--- a/arch/arm/mach-netx/generic.h
+++ b/arch/arm/mach-netx/generic.h
@@ -21,5 +21,4 @@ extern void __init netx_map_io(void);
 extern void __init netx_init_irq(void);
 extern void netx_restart(char, const char *);
 
-struct sys_timer;
-extern struct sys_timer netx_timer;
+extern void netx_timer_init(void);
diff --git a/arch/arm/mach-netx/include/mach/uncompress.h b/arch/arm/mach-netx/include/mach/uncompress.h
index 84f91284f612..5cb1051b5831 100644
--- a/arch/arm/mach-netx/include/mach/uncompress.h
+++ b/arch/arm/mach-netx/include/mach/uncompress.h
@@ -73,4 +73,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index 8b781ff7c9e9..9b558eb3070f 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -204,8 +203,7 @@ MACHINE_START(NXDB500, "Hilscher nxdb500")
         .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &netx_timer,
+        .init_time      = netx_timer_init,
         .init_machine   = nxdb500_init,
         .restart        = netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index b26dbce334f2..a5e86cd365e7 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -97,8 +96,7 @@ MACHINE_START(NXDKN, "Hilscher nxdkn")
         .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &netx_timer,
+        .init_time      = netx_timer_init,
         .init_machine   = nxdkn_init,
         .restart        = netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index 257382efafa0..ad17885d0159 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -28,7 +28,6 @@
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <mach/netx-regs.h>
 #include <linux/platform_data/eth-netx.h>
 
@@ -181,8 +180,7 @@ MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
         .atag_offset    = 0x100,
         .map_io         = netx_map_io,
         .init_irq       = netx_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &netx_timer,
+        .init_time      = netx_timer_init,
         .init_machine   = nxeb500hmi_init,
         .restart        = netx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-netx/time.c b/arch/arm/mach-netx/time.c
index e24c141ba489..6df42e643031 100644
--- a/arch/arm/mach-netx/time.c
+++ b/arch/arm/mach-netx/time.c
@@ -76,7 +76,6 @@ static int netx_set_next_event(unsigned long evt,
 
 static struct clock_event_device netx_clockevent = {
         .name = "netx-timer" __stringify(TIMER_CLOCKEVENT),
-        .shift = 32,
         .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
         .set_next_event = netx_set_next_event,
         .set_mode = netx_set_mode,
@@ -107,7 +106,7 @@ static struct irqaction netx_timer_irq = {
 /*
  * Set up timer interrupt
  */
-static void __init netx_timer_init(void)
+void __init netx_timer_init(void)
 {
         /* disable timer initially */
         writel(0, NETX_GPIO_COUNTER_CTRL(0));
@@ -140,18 +139,9 @@ static void __init netx_timer_init(void)
         clocksource_mmio_init(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE),
                 "netx_timer", CLOCK_TICK_RATE, 200, 32, clocksource_mmio_readl_up);
 
-        netx_clockevent.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
-                        netx_clockevent.shift);
-        netx_clockevent.max_delta_ns =
-                clockevent_delta2ns(0xfffffffe, &netx_clockevent);
         /* with max_delta_ns >= delta2ns(0x800) the system currently runs fine.
          * Adding some safety ... */
-        netx_clockevent.min_delta_ns =
-                clockevent_delta2ns(0xa00, &netx_clockevent);
         netx_clockevent.cpumask = cpumask_of(0);
-        clockevents_register_device(&netx_clockevent);
+        clockevents_config_and_register(&netx_clockevent, CLOCK_TICK_RATE,
+                                        0xa00, 0xfffffffe);
 }
-
-struct sys_timer netx_timer = {
-        .init           = netx_timer_init,
-};
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 9f19069248da..aaed48d94374 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,7 +27,6 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 #include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <asm/hardware/vic.h>
 #include <asm/sizes.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -267,10 +266,6 @@ static void __init nomadik_timer_init(void)
         nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
 }
 
-static struct sys_timer nomadik_timer = {
-        .init   = nomadik_timer_init,
-};
-
 static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
         {
                 I2C_BOARD_INFO("stw4811", 0x2d),
@@ -352,8 +347,7 @@ MACHINE_START(NOMADIK, "NHK8815")
         .atag_offset    = 0x100,
         .map_io         = cpu8815_map_io,
         .init_irq       = cpu8815_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &nomadik_timer,
+        .init_time      = nomadik_timer_init,
         .init_machine   = nhk8815_platform_init,
         .restart        = cpu8815_restart,
 MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 1273931303fb..351404673f6c 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,13 +25,13 @@
 #include <linux/slab.h>
 #include <linux/irq.h>
 #include <linux/dma-mapping.h>
+#include <linux/irqchip/arm-vic.h>
 #include <linux/platform_data/clk-nomadik.h>
 #include <linux/platform_data/pinctrl-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
index 7d4687e9cbdf..f527af6527c8 100644
--- a/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -58,6 +58,4 @@ static inline void arch_decomp_setup(void)
 {
 }
 
-#define arch_decomp_wdog() /* nothing to do here */
-
 #endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 2e98a3ac7c5e..2aab761ee68d 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -628,6 +628,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
         .init_irq       = omap1_init_irq,
         .init_machine   = ams_delta_init,
         .init_late      = ams_delta_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 560a7dcf0a56..702d58039cc1 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -364,6 +364,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_fsample_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 608e7d2a2778..e1d9171774bc 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -84,6 +84,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_generic_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 2274bd677efc..0dac3d239e32 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -461,6 +461,6 @@ MACHINE_START(OMAP_H2, "TI-H2")
         .init_irq       = omap1_init_irq,
         .init_machine   = h2_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 1051935f0aac..816ecd13f81e 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -454,6 +454,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
         .init_irq       = omap1_init_irq,
         .init_machine   = h3_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 356f816c84a6..35a2379b986f 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -603,6 +603,6 @@ MACHINE_START(HERALD, "HTC Herald")
         .init_irq       = omap1_init_irq,
         .init_machine   = htcherald_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index f8033fab0f82..bd5f02e9c354 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -458,6 +458,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
         .init_irq       = omap1_init_irq,
         .init_machine   = innovator_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 24d2f2df11a0..4695ca717706 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -242,6 +242,6 @@ MACHINE_START(NOKIA770, "Nokia 770")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_nokia770_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 872ea47cd28a..a7ce69286688 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -609,6 +609,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
         .init_irq       = omap1_init_irq,
         .init_machine   = osk_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index c33dceb46607..845a1a7aef95 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -268,6 +268,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_palmte_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index 2948b0ee4be8..65a4a3e357f2 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -314,6 +314,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_palmtt_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 7a05895c0be3..01c970071fd8 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -330,6 +330,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_palmz71_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 27f8d12ec222..8b2f7127f716 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -326,6 +326,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_perseus2_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 20ed52ae1714..9732a98f3e06 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -407,6 +407,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
         .init_irq       = omap1_init_irq,
         .init_machine   = omap_sx1_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = omap1_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index abf705f49b19..6c116e1a4b01 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -289,6 +289,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
         .init_irq       = omap1_init_irq,
         .init_machine   = voiceblue_init,
         .init_late      = omap1_init_late,
-        .timer          = &omap1_timer,
+        .init_time      = omap1_timer_init,
         .restart        = voiceblue_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap1/common.h b/arch/arm/mach-omap1/common.h
index b53e0854422f..fb18831e88aa 100644
--- a/arch/arm/mach-omap1/common.h
+++ b/arch/arm/mach-omap1/common.h
@@ -75,7 +75,7 @@ extern void __init omap_check_revision(void);
 extern void omap1_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
                                unsigned int ctrl);
 
-extern struct sys_timer omap1_timer;
+extern void omap1_timer_init(void);
 #ifdef CONFIG_OMAP_32K_TIMER
 extern int omap_32k_timer_init(void);
 #else
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
index ad6fbe7d83f2..4869633de8cd 100644
--- a/arch/arm/mach-omap1/include/mach/uncompress.h
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -115,8 +115,3 @@ static inline void arch_decomp_setup(void)
                 DEBUG_LL_OMAP1(3, sx1);
         } while (0);
 }
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index 4d4816fd6fc9..726ec23d29c7 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -145,7 +145,6 @@ static void omap_mpu_set_mode(enum clock_event_mode mode,
 static struct clock_event_device clockevent_mpu_timer1 = {
         .name           = "mpu_timer1",
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .set_next_event = omap_mpu_set_next_event,
         .set_mode       = omap_mpu_set_mode,
 };
@@ -170,15 +169,9 @@ static __init void omap_init_mpu_timer(unsigned long rate)
         setup_irq(INT_TIMER1, &omap_mpu_timer1_irq);
         omap_mpu_timer_start(0, (rate / HZ) - 1, 1);
 
-        clockevent_mpu_timer1.mult = div_sc(rate, NSEC_PER_SEC,
-                                            clockevent_mpu_timer1.shift);
-        clockevent_mpu_timer1.max_delta_ns =
-                clockevent_delta2ns(-1, &clockevent_mpu_timer1);
-        clockevent_mpu_timer1.min_delta_ns =
-                clockevent_delta2ns(1, &clockevent_mpu_timer1);
-
         clockevent_mpu_timer1.cpumask = cpumask_of(0);
-        clockevents_register_device(&clockevent_mpu_timer1);
+        clockevents_config_and_register(&clockevent_mpu_timer1, rate,
+                                        1, -1);
 }
 
 
@@ -236,12 +229,8 @@ static inline void omap_mpu_timer_init(void)
  * Timer initialization
  * ---------------------------------------------------------------------------
  */
-static void __init omap1_timer_init(void)
+void __init omap1_timer_init(void)
 {
         if (omap_32k_timer_init() != 0)
                 omap_mpu_timer_init();
 }
-
-struct sys_timer omap1_timer = {
-        .init           = omap1_timer_init,
-};
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index 41152fadd4c0..0b74246ba62c 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -140,7 +140,6 @@ static void omap_32k_timer_set_mode(enum clock_event_mode mode,
 static struct clock_event_device clockevent_32k_timer = {
         .name           = "32k-timer",
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .set_next_event = omap_32k_timer_set_next_event,
         .set_mode       = omap_32k_timer_set_mode,
 };
@@ -165,16 +164,9 @@ static __init void omap_init_32k_timer(void)
 {
         setup_irq(INT_OS_TIMER, &omap_32k_timer_irq);
 
-        clockevent_32k_timer.mult = div_sc(OMAP_32K_TICKS_PER_SEC,
-                                           NSEC_PER_SEC,
-                                           clockevent_32k_timer.shift);
-        clockevent_32k_timer.max_delta_ns =
-                clockevent_delta2ns(0xfffffffe, &clockevent_32k_timer);
-        clockevent_32k_timer.min_delta_ns =
-                clockevent_delta2ns(1, &clockevent_32k_timer);
-
         clockevent_32k_timer.cpumask = cpumask_of(0);
-        clockevents_register_device(&clockevent_32k_timer);
+        clockevents_config_and_register(&clockevent_32k_timer,
+                                        OMAP_32K_TICKS_PER_SEC, 1, 0xfffffffe);
 }
 
 /*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1337f2c51f9e..a3e0aaa4886b 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -286,6 +286,6 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_2430sdp_init,
         .init_late      = omap2430_init_late,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .restart        = omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 8a2e242910eb..e71ebdefc679 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -599,6 +599,6 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_3430sdp_init,
         .init_late      = omap3430_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index 050aaa771254..33846274bb8a 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -211,6 +211,6 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_sdp_init,
         .init_late      = omap3630_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 8e8efccf762f..508e2752b7de 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -26,11 +26,11 @@
 #include <linux/regulator/fixed.h>
 #include <linux/leds.h>
 #include <linux/leds_pwm.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/omap4-keypad.h>
 #include <linux/usb/musb.h>
 #include <linux/usb/phy.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -724,9 +724,8 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
         .map_io         = omap4_map_io,
         .init_early     = omap4430_init_early,
         .init_irq       = gic_init_irq,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = omap_4430sdp_init,
         .init_late      = omap4430_init_late,
-        .timer          = &omap4_timer,
+        .init_time      = omap4_local_timer_init,
         .restart        = omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 51b96a1206d1..07f0be24a5d1 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -92,6 +92,6 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = am3517_crane_init,
         .init_late      = am35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f81a303b87ff..6f5b2a05f4b2 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -393,6 +393,6 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = am3517_evm_init,
         .init_late      = am35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 5d0a61f54165..3a6ca74709ab 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -337,6 +337,6 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_apollon_init,
         .init_late      = omap2420_init_late,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .restart        = omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index f1172f2f1a7e..231a7d825f99 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -753,7 +753,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = cm_t35_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
 
@@ -766,6 +766,6 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = cm_t3730_init,
         .init_late     = omap3630_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index ebbc2adb499e..6a9529ab95cd 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -297,6 +297,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = cm_t3517_init,
         .init_late      = am35xx_init_late,
-        .timer          = &omap3_gp_timer,
+        .init_time      = omap3_gp_gptimer_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 77cade52b022..a37514ecc385 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -645,6 +645,6 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = devkit8000_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_secure_timer,
+        .init_time      = omap3_secure_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 53cb380b7877..2590463e4b57 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -16,7 +16,6 @@
 #include <linux/of_platform.h>
 #include <linux/irqdomain.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 
 #include "common.h"
@@ -65,7 +64,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)")
         .init_irq       = omap_intc_of_init,
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_generic_init,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .dt_compat      = omap242x_boards_compat,
         .restart        = omap2xxx_restart,
 MACHINE_END
@@ -84,7 +83,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
         .init_irq       = omap_intc_of_init,
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_generic_init,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .dt_compat      = omap243x_boards_compat,
         .restart        = omap2xxx_restart,
 MACHINE_END
@@ -103,7 +102,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
         .init_irq       = omap_intc_of_init,
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_generic_init,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .dt_compat      = omap3_boards_compat,
         .restart        = omap3xxx_restart,
 MACHINE_END
@@ -120,7 +119,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
         .init_irq       = omap_intc_of_init,
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_generic_init,
-        .timer          = &omap3_secure_timer,
+        .init_time      = omap3_secure_sync32k_timer_init,
         .dt_compat      = omap3_gp_boards_compat,
         .restart        = omap3xxx_restart,
 MACHINE_END
@@ -139,7 +138,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)")
         .init_irq       = omap_intc_of_init,
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_generic_init,
-        .timer          = &omap3_am33xx_timer,
+        .init_time      = omap3_am33xx_gptimer_timer_init,
         .dt_compat      = am33xx_boards_compat,
 MACHINE_END
 #endif
@@ -156,10 +155,9 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)")
         .map_io         = omap4_map_io,
         .init_early     = omap4430_init_early,
         .init_irq       = omap_gic_of_init,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = omap_generic_init,
         .init_late      = omap4430_init_late,
-        .timer          = &omap4_timer,
+        .init_time      = omap4_local_timer_init,
         .dt_compat      = omap4_boards_compat,
         .restart        = omap44xx_restart,
 MACHINE_END
@@ -177,9 +175,8 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP5 (Flattened Device Tree)")
         .map_io         = omap5_map_io,
         .init_early     = omap5_init_early,
         .init_irq       = omap_gic_of_init,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = omap_generic_init,
-        .timer          = &omap5_timer,
+        .init_time      = omap5_realtime_timer_init,
         .dt_compat      = omap5_boards_compat,
         .restart        = omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 3be1311f9e33..812c829fa46f 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -342,6 +342,6 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = omap_h4_init,
         .init_late      = omap2420_init_late,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .restart        = omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 15e58815a131..3f97f30d788e 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -657,7 +657,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = igep_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
 
@@ -670,6 +670,6 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = igep_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index 3b5510a433f0..b12fe966a7b9 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -437,6 +437,6 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_ldp_init,
         .init_late      = omap3430_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 0abb30fe399c..f6eeb87e4e95 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -731,7 +731,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = n8x0_init_machine,
         .init_late      = omap2420_init_late,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .restart        = omap2xxx_restart,
 MACHINE_END
 
@@ -744,7 +744,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = n8x0_init_machine,
         .init_late      = omap2420_init_late,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .restart        = omap2xxx_restart,
 MACHINE_END
 
@@ -757,6 +757,6 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
         .handle_irq     = omap2_intc_handle_irq,
         .init_machine   = n8x0_init_machine,
         .init_late      = omap2420_init_late,
-        .timer          = &omap2_timer,
+        .init_time      = omap2_sync32k_timer_init,
         .restart        = omap2xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4616f9269d00..d07058b9c284 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -546,6 +546,6 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3_beagle_init,
         .init_late      = omap3_init_late,
-        .timer          = &omap3_secure_timer,
+        .init_time      = omap3_secure_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 202389503457..f43763647d58 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -759,6 +759,6 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3_evm_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 9409eb897e2f..bab51e64c4b5 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -233,7 +233,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3logic_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
 
@@ -246,6 +246,6 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3logic_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 1ac3e81969e0..07cc0884e761 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -620,6 +620,6 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3pandora_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 63cb204e0811..0490acbc4331 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -429,6 +429,6 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
         .handle_irq             = omap3_intc_handle_irq,
         .init_machine           = omap3_stalker_init,
         .init_late              = omap35xx_init_late,
-        .timer                  = &omap3_secure_timer,
+        .init_time              = omap3_secure_sync32k_timer_init,
         .restart                = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 6b22ce3581d7..91daf71190cf 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -388,6 +388,6 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap3_touchbook_init,
         .init_late      = omap3430_init_late,
-        .timer          = &omap3_secure_timer,
+        .init_time      = omap3_secure_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 40184cc494f9..7b152d04a602 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -32,9 +32,9 @@
 #include <linux/usb/musb.h>
 #include <linux/usb/phy.h>
 #include <linux/wl12xx.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/omap-abe-twl6040.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -461,9 +461,8 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
         .map_io         = omap4_map_io,
         .init_early     = omap4430_init_early,
         .init_irq       = gic_init_irq,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = omap4_panda_init,
         .init_late      = omap4430_init_late,
-        .timer          = &omap4_timer,
+        .init_time      = omap4_local_timer_init,
         .restart        = omap44xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 7e43ff3f704c..6975a8585dae 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -553,6 +553,6 @@ MACHINE_START(OVERO, "Gumstix Overo")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = overo_init,
         .init_late      = omap35xx_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index f8a272c253f5..345e8c4b8731 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -149,7 +149,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = rm680_init,
         .init_late      = omap3630_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
 
@@ -162,6 +162,6 @@ MACHINE_START(NOKIA_RM696, "Nokia RM-696 board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = rm680_init,
         .init_late      = omap3630_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index d0374ea2dfb0..f7c4616cbb60 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -123,6 +123,6 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = rx51_init,
         .init_late      = omap3430_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index 1a3e056d63a7..6273c286e1d8 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -43,7 +43,7 @@ MACHINE_START(TI8168EVM, "ti8168evm")
         .map_io         = ti81xx_map_io,
         .init_early     = ti81xx_init_early,
         .init_irq       = ti81xx_init_irq,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .init_machine   = ti81xx_evm_init,
         .init_late      = ti81xx_init_late,
         .restart        = omap44xx_restart,
@@ -55,7 +55,7 @@ MACHINE_START(TI8148EVM, "ti8148evm")
         .map_io         = ti81xx_map_io,
         .init_early     = ti81xx_init_early,
         .init_irq       = ti81xx_init_irq,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .init_machine   = ti81xx_evm_init,
         .init_late      = ti81xx_init_late,
         .restart        = omap44xx_restart,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index d7fa31e67238..d257cf1e0abe 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -137,7 +137,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_zoom_init,
         .init_late      = omap3430_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
 
@@ -150,6 +150,6 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
         .handle_irq     = omap3_intc_handle_irq,
         .init_machine   = omap_zoom_init,
         .init_late      = omap3630_init_late,
-        .timer          = &omap3_timer,
+        .init_time      = omap3_sync32k_timer_init,
         .restart        = omap3xxx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h
index 948bcaa82eb6..b4350274361b 100644
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -79,13 +79,13 @@ static inline int omap_mux_late_init(void)
 
 extern void omap2_init_common_infrastructure(void);
 
-extern struct sys_timer omap2_timer;
-extern struct sys_timer omap3_timer;
-extern struct sys_timer omap3_secure_timer;
-extern struct sys_timer omap3_gp_timer;
-extern struct sys_timer omap3_am33xx_timer;
-extern struct sys_timer omap4_timer;
-extern struct sys_timer omap5_timer;
+extern void omap2_sync32k_timer_init(void);
+extern void omap3_sync32k_timer_init(void);
+extern void omap3_secure_sync32k_timer_init(void);
+extern void omap3_gp_gptimer_timer_init(void);
+extern void omap3_am33xx_gptimer_timer_init(void);
+extern void omap4_local_timer_init(void);
+extern void omap5_realtime_timer_init(void);
 
 void omap2420_init_early(void);
 void omap2430_init_early(void);
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
index 8e3546d3e041..7b360acd19c9 100644
--- a/arch/arm/mach-omap2/include/mach/uncompress.h
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -169,8 +169,3 @@ static inline void arch_decomp_setup(void)
                 DEBUG_LL_AM33XX(1, am335xevm);
         } while (0);
 }
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index cd42d921940d..361677983af0 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -19,9 +19,9 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 
 #include "omap-secure.h"
@@ -157,7 +157,7 @@ static int __cpuinit omap4_boot_secondary(unsigned int cpu, struct task_struct *
                 booted = true;
         }
 
-        gic_raise_softirq(cpumask_of(cpu), 0);
+        arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
         /*
          * Now the secondary core is starting up let it run its
@@ -231,8 +231,6 @@ static void __init omap4_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init omap4_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c
index 8633a43acae2..f8bb3b9b6a76 100644
--- a/arch/arm/mach-omap2/omap-wakeupgen.c
+++ b/arch/arm/mach-omap2/omap-wakeupgen.c
@@ -24,8 +24,7 @@
 #include <linux/cpu.h>
 #include <linux/notifier.h>
 #include <linux/cpu_pm.h>
-
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include "omap-wakeupgen.h"
 #include "omap-secure.h"
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 6897ae21bb82..547094883606 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -15,13 +15,14 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/memblock.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/export.h>
+#include <linux/irqchip/arm-gic.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/map.h>
 #include <asm/memblock.h>
@@ -255,16 +256,10 @@ static int __init omap4_sar_ram_init(void)
 }
 early_initcall(omap4_sar_ram_init);
 
-static struct of_device_id irq_match[] __initdata = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        { .compatible = "arm,cortex-a15-gic", .data = gic_of_init, },
-        { }
-};
-
 void __init omap_gic_of_init(void)
 {
         omap_wakeupgen_init();
-        of_irq_init(irq_match);
+        irqchip_init();
 }
 
 #if defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c
index 265de51b43d9..71729888ff03 100644
--- a/arch/arm/mach-omap2/timer.c
+++ b/arch/arm/mach-omap2/timer.c
@@ -131,7 +131,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
 static struct clock_event_device clockevent_gpt = {
         .name           = "gp_timer",
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
-        .shift          = 32,
         .rating         = 300,
         .set_next_event = omap2_gp_timer_set_next_event,
         .set_mode       = omap2_gp_timer_set_mode,
@@ -336,17 +335,11 @@ static void __init omap2_gp_clockevent_init(int gptimer_id,
 
         __omap_dm_timer_int_enable(&clkev, OMAP_TIMER_INT_OVERFLOW);
 
-        clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC,
-                                     clockevent_gpt.shift);
-        clockevent_gpt.max_delta_ns =
-                clockevent_delta2ns(0xffffffff, &clockevent_gpt);
-        clockevent_gpt.min_delta_ns =
-                clockevent_delta2ns(3, &clockevent_gpt);
-                /* Timer internal resynch latency. */
-
         clockevent_gpt.cpumask = cpu_possible_mask;
         clockevent_gpt.irq = omap_dm_timer_get_irq(&clkev);
-        clockevents_register_device(&clockevent_gpt);
+        clockevents_config_and_register(&clockevent_gpt, clkev.rate,
+                                        3, /* Timer internal resynch latency */
+                                        0xffffffff);
 
         pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n",
                 gptimer_id, clkev.rate);
@@ -552,7 +545,7 @@ static inline void __init realtime_counter_init(void)
 
 #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,   \
                                clksrc_nr, clksrc_src)                   \
-static void __init omap##name##_gptimer_timer_init(void)                \
+void __init omap##name##_gptimer_timer_init(void)                       \
 {                                                                       \
         omap_dmtimer_init();                                            \
         omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);    \
@@ -561,7 +554,7 @@ static void __init omap##name##_gptimer_timer_init(void)		\
 
 #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop,  \
                                 clksrc_nr, clksrc_src)                  \
-static void __init omap##name##_sync32k_timer_init(void)                \
+void __init omap##name##_sync32k_timer_init(void)               \
 {                                                                       \
         omap_dmtimer_init();                                            \
         omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop);    \
@@ -572,33 +565,23 @@ static void __init omap##name##_sync32k_timer_init(void)		\
                 omap2_sync32k_clocksource_init();                       \
 }
 
-#define OMAP_SYS_TIMER(name, clksrc)                                    \
-struct sys_timer omap##name##_timer = {                                 \
-        .init   = omap##name##_##clksrc##_timer_init,                   \
-};
-
 #ifdef CONFIG_ARCH_OMAP2
 OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon",
                         2, OMAP2_MPU_SOURCE);
-OMAP_SYS_TIMER(2, sync32k);
 #endif /* CONFIG_ARCH_OMAP2 */
 
 #ifdef CONFIG_ARCH_OMAP3
 OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon",
                         2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3, sync32k);
 OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure",
                         2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3_secure, sync32k);
 OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon",
                        2, OMAP3_MPU_SOURCE);
-OMAP_SYS_TIMER(3_gp, gptimer);
 #endif /* CONFIG_ARCH_OMAP3 */
 
 #ifdef CONFIG_SOC_AM33XX
 OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon",
                        2, OMAP4_MPU_SOURCE);
-OMAP_SYS_TIMER(3_am33xx, gptimer);
 #endif /* CONFIG_SOC_AM33XX */
 
 #ifdef CONFIG_ARCH_OMAP4
@@ -606,7 +589,7 @@ OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
                         2, OMAP4_MPU_SOURCE);
 #ifdef CONFIG_LOCAL_TIMERS
 static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29);
-static void __init omap4_local_timer_init(void)
+void __init omap4_local_timer_init(void)
 {
         omap4_sync32k_timer_init();
         /* Local timers are not supprted on OMAP4430 ES1.0 */
@@ -624,18 +607,17 @@ static void __init omap4_local_timer_init(void)
         }
 }
 #else /* CONFIG_LOCAL_TIMERS */
-static void __init omap4_local_timer_init(void)
+void __init omap4_local_timer_init(void)
 {
         omap4_sync32k_timer_init();
 }
 #endif /* CONFIG_LOCAL_TIMERS */
-OMAP_SYS_TIMER(4, local);
 #endif /* CONFIG_ARCH_OMAP4 */
 
 #ifdef CONFIG_SOC_OMAP5
 OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon",
                         2, OMAP4_MPU_SOURCE);
-static void __init omap5_realtime_timer_init(void)
+void __init omap5_realtime_timer_init(void)
 {
         int err;
 
@@ -646,7 +628,6 @@ static void __init omap5_realtime_timer_init(void)
         if (err)
                 pr_err("%s: arch_timer_register failed %d\n", __func__, err);
 }
-OMAP_SYS_TIMER(5, realtime);
 #endif /* CONFIG_SOC_OMAP5 */
 
 /**
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
index 32e5c211a89b..35a8014529ca 100644
--- a/arch/arm/mach-orion5x/board-dt.c
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -72,7 +72,7 @@ DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion_dt_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .init_machine   = orion5x_dt_init,
         .restart        = orion5x_restart,
         .dt_compat      = orion5x_dt_compat,
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 550f92320afb..d068f1431c40 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -217,7 +217,7 @@ int __init orion5x_find_tclk(void)
         return 166666667;
 }
 
-static void __init orion5x_timer_init(void)
+void __init orion5x_timer_init(void)
 {
         orion5x_tclk = orion5x_find_tclk();
 
@@ -225,10 +225,6 @@ static void __init orion5x_timer_init(void)
                         IRQ_ORION5X_BRIDGE, orion5x_tclk);
 }
 
-struct sys_timer orion5x_timer = {
-        .init = orion5x_timer_init,
-};
-
 
 /*****************************************************************************
  * General
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 7db5cdd9c4b7..e60345760283 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -15,7 +15,7 @@ void orion5x_init(void);
 void orion5x_id(u32 *dev, u32 *rev, char **dev_name);
 void clk_init(void);
 extern int orion5x_tclk;
-extern struct sys_timer orion5x_timer;
+extern void orion5x_timer_init(void);
 
 /*
  * Enumerations and functions for Orion windows mapping. Used by Orion core
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index e3629c063df2..57d0af74874d 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -342,7 +342,7 @@ MACHINE_START(D2NET, "LaCie d2 Network")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
@@ -355,7 +355,7 @@ MACHINE_START(BIGDISK, "LaCie Big Disk Network")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 41fe2b1ff47c..76665640087b 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -362,6 +362,6 @@ MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index e533588880ff..6eb1732757fd 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -714,7 +714,7 @@ MACHINE_START(DNS323, "D-Link DNS-323")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/include/mach/uncompress.h b/arch/arm/mach-orion5x/include/mach/uncompress.h
index 4322dba468a4..abd26b542c3c 100644
--- a/arch/arm/mach-orion5x/include/mach/uncompress.h
+++ b/arch/arm/mach-orion5x/include/mach/uncompress.h
@@ -46,4 +46,3 @@ static void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f1ae10ae5bd4..b98403526218 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -383,7 +383,7 @@ MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
@@ -397,7 +397,7 @@ MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 0c9e413b5805..044da5b6a6ae 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -322,7 +322,7 @@ MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index c1b5d8a58037..d49f93423f52 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -269,7 +269,7 @@ MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 949eaa8f12e3..8e3965c6c0fe 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -271,7 +271,7 @@ MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index 1c16d045333e..0ec94a1f2b16 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -265,7 +265,7 @@ MACHINE_START(MSS2, "Maxtor Shared Storage II")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index c87fde4deeca..18143f2a9093 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -233,7 +233,7 @@ MACHINE_START(MV2120, "HP Media Vault mv2120")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index 3506f16c0bf2..282e503b003e 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -425,7 +425,7 @@ MACHINE_START(NET2BIG, "LaCie 2Big Network")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 9b1c95310291..d6e72f672afb 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -171,7 +171,7 @@ MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 51ba2b81a10b..c8b7913310e5 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -183,7 +183,7 @@ MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 0a56b9444f1b..f9e156725d7c 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -281,6 +281,6 @@ MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index ed50910b08a4..78a1e6ab1b9d 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -123,7 +123,7 @@ MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 90e571dc4deb..acc0877ec1c9 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -361,7 +361,7 @@ MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index b184f680e0db..9c17f0c2b488 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -326,7 +326,7 @@ MACHINE_START(TS209, "QNAP TS-109/TS-209")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index a5c2e64c4ece..8cc5ab6c503e 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -315,7 +315,7 @@ MACHINE_START(TS409, "QNAP TS-409")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index b0727dcd1ef9..e960855d32ac 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -619,6 +619,6 @@ MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
         .map_io         = ts78xx_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 754c12b6abf0..66552ca7e05d 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -176,7 +176,7 @@ MACHINE_START(WNR854T, "Netgear WNR854T")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 45c21251eb1e..2c5408e2e689 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -264,7 +264,7 @@ MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
         .map_io         = orion5x_map_io,
         .init_early     = orion5x_init_early,
         .init_irq       = orion5x_init_irq,
-        .timer          = &orion5x_timer,
+        .init_time      = orion5x_timer_init,
         .fixup          = tag_fixup_mem32,
         .restart        = orion5x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-picoxcell/Kconfig b/arch/arm/mach-picoxcell/Kconfig
index 868796f8085c..13bae78b215a 100644
--- a/arch/arm/mach-picoxcell/Kconfig
+++ b/arch/arm/mach-picoxcell/Kconfig
@@ -7,7 +7,6 @@ config ARCH_PICOXCELL
         select DW_APB_TIMER
         select DW_APB_TIMER_OF
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_TCM
         select NO_IOPORT
         select SPARSE_IRQ
diff --git a/arch/arm/mach-picoxcell/common.c b/arch/arm/mach-picoxcell/common.c
index f6c0849af5e9..70b441ad1d18 100644
--- a/arch/arm/mach-picoxcell/common.c
+++ b/arch/arm/mach-picoxcell/common.c
@@ -9,6 +9,7 @@
  */
 #include <linux/delay.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -17,7 +18,6 @@
 #include <linux/dw_apb_timer.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
 
 #include "common.h"
@@ -70,16 +70,6 @@ static const char *picoxcell_dt_match[] = {
         NULL
 };
 
-static const struct of_device_id vic_of_match[] __initconst = {
-        { .compatible = "arm,pl192-vic", .data = vic_of_init, },
-        { /* Sentinel */ }
-};
-
-static void __init picoxcell_init_irq(void)
-{
-        of_irq_init(vic_of_match);
-}
-
 static void picoxcell_wdt_restart(char mode, const char *cmd)
 {
         /*
@@ -97,9 +87,8 @@ static void picoxcell_wdt_restart(char mode, const char *cmd)
 DT_MACHINE_START(PICOXCELL, "Picochip picoXcell")
         .map_io         = picoxcell_map_io,
         .nr_irqs        = NR_IRQS_LEGACY,
-        .init_irq       = picoxcell_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &dw_apb_timer,
+        .init_irq       = irqchip_init,
+        .init_time      = dw_apb_timer_init,
         .init_machine   = picoxcell_init_machine,
         .dt_compat      = picoxcell_dt_match,
         .restart        = picoxcell_wdt_restart,
diff --git a/arch/arm/mach-picoxcell/common.h b/arch/arm/mach-picoxcell/common.h
index a65cb02f84c8..481b42a4ef15 100644
--- a/arch/arm/mach-picoxcell/common.h
+++ b/arch/arm/mach-picoxcell/common.h
@@ -12,6 +12,6 @@
 
 #include <asm/mach/time.h>
 
-extern struct sys_timer dw_apb_timer;
+extern void dw_apb_timer_init(void);
 
 #endif /* __PICOXCELL_COMMON_H__ */
diff --git a/arch/arm/mach-prima2/common.c b/arch/arm/mach-prima2/common.c
index f25a54194639..ed3570e5eb8f 100644
--- a/arch/arm/mach-prima2/common.c
+++ b/arch/arm/mach-prima2/common.c
@@ -40,7 +40,7 @@ DT_MACHINE_START(PRIMA2_DT, "Generic PRIMA2 (Flattened Device Tree)")
         /* Maintainer: Barry Song <baohua.song@csr.com> */
         .map_io         = sirfsoc_map_lluart,
         .init_irq       = sirfsoc_of_irq_init,
-        .timer          = &sirfsoc_timer,
+        .init_time      = sirfsoc_timer_init,
         .dma_zone_size  = SZ_256M,
         .init_machine   = sirfsoc_mach_init,
         .init_late      = sirfsoc_init_late,
diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h
index 60d826fc2185..9c75f124e3cf 100644
--- a/arch/arm/mach-prima2/common.h
+++ b/arch/arm/mach-prima2/common.h
@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <asm/mach/time.h>
 
-extern struct sys_timer sirfsoc_timer;
+extern void sirfsoc_timer_init(void);
 
 extern void __init sirfsoc_of_irq_init(void);
 extern void __init sirfsoc_of_clk_init(void);
diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h
index 0c898fcf909c..f72ca26ab4fe 100644
--- a/arch/arm/mach-prima2/include/mach/uncompress.h
+++ b/arch/arm/mach-prima2/include/mach/uncompress.h
@@ -17,8 +17,6 @@ void arch_decomp_setup(void)
 {
 }
 
-#define arch_decomp_wdog()
-
 static __inline__ void putc(char c)
 {
         /*
diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c
index d95bf252f694..a7a2c199c3ea 100644
--- a/arch/arm/mach-prima2/timer.c
+++ b/arch/arm/mach-prima2/timer.c
@@ -175,19 +175,13 @@ static u32 notrace sirfsoc_read_sched_clock(void)
 
 static void __init sirfsoc_clockevent_init(void)
 {
-        clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60);
-
-        sirfsoc_clockevent.max_delta_ns =
-                clockevent_delta2ns(-2, &sirfsoc_clockevent);
-        sirfsoc_clockevent.min_delta_ns =
-                clockevent_delta2ns(2, &sirfsoc_clockevent);
-
         sirfsoc_clockevent.cpumask = cpumask_of(0);
-        clockevents_register_device(&sirfsoc_clockevent);
+        clockevents_config_and_register(&sirfsoc_clockevent, CLOCK_TICK_RATE,
+                                        2, -2);
 }
 
 /* initialize the kernel jiffy timer source */
-static void __init sirfsoc_timer_init(void)
+void __init sirfsoc_timer_init(void)
 {
         unsigned long rate;
         struct clk *clk;
@@ -226,7 +220,7 @@ static struct of_device_id timer_ids[] = {
         {},
 };
 
-static void __init sirfsoc_of_timer_map(void)
+void __init sirfsoc_of_timer_map(void)
 {
         struct device_node *np;
         const unsigned int *intspec;
@@ -245,7 +239,3 @@ static void __init sirfsoc_of_timer_map(void)
 
         of_node_put(np);
 }
-
-struct sys_timer sirfsoc_timer = {
-        .init = sirfsoc_timer_init,
-};
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 208229342514..2f71b3fbd319 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -822,7 +822,7 @@ MACHINE_START(BALLOON3, "Balloon3")
         .nr_irqs        = BALLOON3_NR_IRQS,
         .init_irq       = balloon3_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = balloon3_init,
         .atag_offset    = 0x100,
         .restart        = pxa_restart,
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 9a8760b72913..c092730749b9 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -153,7 +153,7 @@ MACHINE_START(CAPC7117,
         .nr_irqs = PXA_NR_IRQS,
         .init_irq = pxa3xx_init_irq,
         .handle_irq = pxa3xx_handle_irq,
-        .timer = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine = capc7117_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index a103c8ffea9f..bb99f59a36d8 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -520,7 +520,7 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
         .init_irq       = cmx2xx_init_irq,
         /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = cmx2xx_init,
 #ifdef CONFIG_PCI
         .dma_zone_size  = SZ_64M,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index cc2b23afcaaf..8091aac89edf 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -854,7 +854,7 @@ MACHINE_START(CM_X300, "CM-X300 module")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = cm_x300_init,
         .fixup          = cm_x300_fixup,
         .restart        = pxa_restart,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index b2f227d36125..5f9d9303b346 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -313,7 +313,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 
@@ -324,7 +324,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index a9c9c163dd95..f1a1ac1fbd85 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -189,7 +189,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 25515cd7e68f..f6cc8b0ab82f 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -259,7 +259,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 7c83f52c549c..a5b8fead7d61 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -733,7 +733,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
         .init_machine   = corgi_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = corgi_restart,
 MACHINE_END
 #endif
@@ -746,7 +746,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
         .init_machine   = corgi_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = corgi_restart,
 MACHINE_END
 #endif
@@ -759,7 +759,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
         .init_machine   = corgi_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = corgi_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 7039f44b3647..fadfff8feaef 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -278,6 +278,6 @@ MACHINE_START(CSB726, "Cogent CSB726")
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
         .init_machine   = csb726_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 1b6411439ec8..446563a7d1ad 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1298,7 +1298,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = em_x270_init,
         .restart        = pxa_restart,
 MACHINE_END
@@ -1309,7 +1309,7 @@ MACHINE_START(EXEDA, "Compulab eXeda")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = em_x270_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index be2ee9bf5c6e..8280ebcaab9f 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -195,7 +195,7 @@ MACHINE_START(E330, "Toshiba e330")
         .handle_irq     = pxa25x_handle_irq,
         .fixup          = eseries_fixup,
         .init_machine   = e330_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
@@ -246,7 +246,7 @@ MACHINE_START(E350, "Toshiba e350")
         .handle_irq     = pxa25x_handle_irq,
         .fixup          = eseries_fixup,
         .init_machine   = e350_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
@@ -370,7 +370,7 @@ MACHINE_START(E400, "Toshiba e400")
         .handle_irq     = pxa25x_handle_irq,
         .fixup          = eseries_fixup,
         .init_machine   = e400_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
@@ -566,7 +566,7 @@ MACHINE_START(E740, "Toshiba e740")
         .handle_irq     = pxa25x_handle_irq,
         .fixup          = eseries_fixup,
         .init_machine   = e740_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
@@ -765,7 +765,7 @@ MACHINE_START(E750, "Toshiba e750")
         .handle_irq     = pxa25x_handle_irq,
         .fixup          = eseries_fixup,
         .init_machine   = e750_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
@@ -977,7 +977,7 @@ MACHINE_START(E800, "Toshiba e800")
         .handle_irq     = pxa25x_handle_irq,
         .fixup          = eseries_fixup,
         .init_machine   = e800_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index dc58fa0edb66..dca10709be8f 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -802,7 +802,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = a780_init,
         .restart        = pxa_restart,
 MACHINE_END
@@ -869,7 +869,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = e680_init,
         .restart        = pxa_restart,
 MACHINE_END
@@ -936,7 +936,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = a1200_init,
         .restart        = pxa_restart,
 MACHINE_END
@@ -1128,7 +1128,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = a910_init,
         .restart        = pxa_restart,
 MACHINE_END
@@ -1195,7 +1195,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = e6_init,
         .restart        = pxa_restart,
 MACHINE_END
@@ -1236,7 +1236,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
         .nr_irqs        = EZX_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = e2_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 42d5cca66257..fd7ea39b78c0 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -10,9 +10,8 @@
  */
 
 struct irq_data;
-struct sys_timer;
 
-extern struct sys_timer pxa_timer;
+extern void pxa_timer_init(void);
 
 extern void __init pxa_map_io(void);
 
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 60755a6bb1c6..00b92dad7b81 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -238,7 +238,7 @@ MACHINE_START(GUMSTIX, "Gumstix")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = gumstix_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index e7dec589f014..875ec3351499 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -208,7 +208,7 @@ MACHINE_START(H5400, "HP iPAQ H5000")
         .nr_irqs = PXA_NR_IRQS,
         .init_irq = pxa25x_init_irq,
         .handle_irq = pxa25x_handle_irq,
-        .timer = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine = h5000_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index 2962de898da9..7a8d749a07b8 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -164,6 +164,6 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
         .init_irq = pxa25x_init_irq,
         .handle_irq = pxa25x_handle_irq,
         .init_machine = himalaya_init,
-        .timer = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index e2c6391863fe..133109ec7332 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -900,6 +900,6 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
         .init_irq     = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
         .init_machine = hx4700_init,
-        .timer        = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index 1d02eabc9c65..fe31bfcbb8df 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -196,7 +196,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = icontrol_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 64507cdd2e8f..343c4e3a7c5d 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -279,7 +279,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = idp_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index 5519a34b667f..8c27757e68ff 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -72,8 +72,3 @@ static inline void arch_decomp_setup(void)
                 uart_is_pxa = 0;
         }
 }
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 402874f9021f..e848c4607baf 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -443,7 +443,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
         .nr_irqs        = LITTLETON_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = littleton_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1a63eaa89867..1255ee00f3d1 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -503,7 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
         .nr_irqs        = LPD270_NR_IRQS,
         .init_irq       = lpd270_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = lpd270_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 553056d9a3c5..d8a1be619f21 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -650,7 +650,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
         .nr_irqs        = LUBBOCK_NR_IRQS,
         .init_irq       = lubbock_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = lubbock_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index f7922404d941..f44532fc648b 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -774,6 +774,6 @@ MACHINE_START(MAGICIAN, "HTC Magician")
         .init_irq = pxa27x_init_irq,
         .handle_irq = pxa27x_handle_irq,
         .init_machine = magician_init,
-        .timer = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f27a61ee7ac7..7a12c1ba90ff 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -714,7 +714,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
         .nr_irqs        = MAINSTONE_NR_IRQS,
         .init_irq       = mainstone_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = mainstone_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2831308dba68..f8979b943cbf 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -762,6 +762,6 @@ MACHINE_START(MIOA701, "MIO A701")
         .init_irq       = &pxa27x_init_irq,
         .handle_irq     = &pxa27x_handle_irq,
         .init_machine   = mioa701_machine_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = mioa701_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 152efbf093f6..854f1f562d6b 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -93,7 +93,7 @@ static void __init mp900c_init(void)
 /* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
 MACHINE_START(NEC_MP900, "MobilePro900/C")
         .atag_offset    = 0x220100,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .map_io         = pxa25x_map_io,
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 8bcc96e3b0db..909b713e5789 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -347,7 +347,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = palmld_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 5ca7b904a30e..5033fd07968f 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -208,7 +208,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = palmt5_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index ca924cfedfc0..100b176f7e88 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -542,7 +542,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = palmtc_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 32e0d7998355..0742721ced2d 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -363,7 +363,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = palmte2_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 577512845a6c..a29849d181c8 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -501,7 +501,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = treo680_init,
         .restart        = pxa_restart,
 MACHINE_END
@@ -515,7 +515,7 @@ MACHINE_START(CENTRO, "Palm Centro 685")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq       = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = centro_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 8b4366628a12..627c93a7364c 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -366,7 +366,7 @@ MACHINE_START(PALMTX, "Palm T|X")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = palmtx_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 8cdd4f58e253..18b7fcd98592 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -404,7 +404,7 @@ MACHINE_START(PALMZ72, "Palm Zire72")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = palmz72_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index fe9054435b6f..69918c7e3f1f 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -263,7 +263,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
         .nr_irqs        = PCM027_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = pcm027_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 2910bb935c75..50ccd5f1d560 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -469,7 +469,7 @@ MACHINE_START(POODLE, "SHARP Poodle")
         .nr_irqs        = POODLE_NR_IRQS,       /* 4 for LoCoMo */
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = poodle_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index c9192cea0033..3835979a0dd3 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -55,7 +55,7 @@ DT_MACHINE_START(PXA_DT, "Marvell PXA3xx (Device Tree Support)")
         .map_io         = pxa3xx_map_io,
         .init_irq       = pxa3xx_dt_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
         .init_machine   = pxa3xx_dt_init,
         .dt_compat      = pxa3xx_dt_board_compat,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 25b08bfa997b..af41888acbd6 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1095,7 +1095,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
@@ -1108,7 +1108,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
@@ -1121,7 +1121,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 08d87a5d2639..710c493eac89 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -601,7 +601,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq       = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = saar_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 7e2cb880daa6..362726c49c70 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -986,7 +986,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
         .init_machine   = spitz_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = spitz_restart,
 MACHINE_END
 #endif
@@ -1000,7 +1000,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
         .init_machine   = spitz_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = spitz_restart,
 MACHINE_END
 #endif
@@ -1014,7 +1014,7 @@ MACHINE_START(AKITA, "SHARP Akita")
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
         .init_machine   = spitz_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = spitz_restart,
 MACHINE_END
 #endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 456560b5aad4..88fde43c948c 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1006,7 +1006,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = imote2_init,
         .atag_offset    = 0x100,
         .restart        = pxa_restart,
@@ -1019,7 +1019,7 @@ MACHINE_START(STARGATE2, "Stargate 2")
         .nr_irqs = STARGATE_NR_IRQS,
         .init_irq = pxa27x_init_irq,
         .handle_irq = pxa27x_handle_irq,
-        .timer = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine = stargate2_init,
         .atag_offset = 0x100,
         .restart        = pxa_restart,
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 1a25f8a7b0ce..f55979c09a5f 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -494,7 +494,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq       = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = tavorevb_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 4bc47d63698b..8f1ee92aea30 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -89,48 +89,10 @@ pxa_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *dev)
         }
 }
 
-static struct clock_event_device ckevt_pxa_osmr0 = {
-        .name           = "osmr0",
-        .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .rating         = 200,
-        .set_next_event = pxa_osmr0_set_next_event,
-        .set_mode       = pxa_osmr0_set_mode,
-};
-
-static struct irqaction pxa_ost0_irq = {
-        .name           = "ost0",
-        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-        .handler        = pxa_ost0_interrupt,
-        .dev_id         = &ckevt_pxa_osmr0,
-};
-
-static void __init pxa_timer_init(void)
-{
-        unsigned long clock_tick_rate = get_clock_tick_rate();
-
-        writel_relaxed(0, OIER);
-        writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
-
-        setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
-
-        clockevents_calc_mult_shift(&ckevt_pxa_osmr0, clock_tick_rate, 4);
-        ckevt_pxa_osmr0.max_delta_ns =
-                clockevent_delta2ns(0x7fffffff, &ckevt_pxa_osmr0);
-        ckevt_pxa_osmr0.min_delta_ns =
-                clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_pxa_osmr0) + 1;
-        ckevt_pxa_osmr0.cpumask = cpumask_of(0);
-
-        setup_irq(IRQ_OST0, &pxa_ost0_irq);
-
-        clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
-                clocksource_mmio_readl_up);
-        clockevents_register_device(&ckevt_pxa_osmr0);
-}
-
 #ifdef CONFIG_PM
 static unsigned long osmr[4], oier, oscr;
 
-static void pxa_timer_suspend(void)
+static void pxa_timer_suspend(struct clock_event_device *cedev)
 {
         osmr[0] = readl_relaxed(OSMR0);
         osmr[1] = readl_relaxed(OSMR1);
@@ -140,7 +102,7 @@ static void pxa_timer_suspend(void)
         oscr = readl_relaxed(OSCR);
 }
 
-static void pxa_timer_resume(void)
+static void pxa_timer_resume(struct clock_event_device *cedev)
 {
         /*
          * Ensure that we have at least MIN_OSCR_DELTA between match
@@ -163,8 +125,38 @@ static void pxa_timer_resume(void)
 #define pxa_timer_resume NULL
 #endif
 
-struct sys_timer pxa_timer = {
-        .init           = pxa_timer_init,
+static struct clock_event_device ckevt_pxa_osmr0 = {
+        .name           = "osmr0",
+        .features       = CLOCK_EVT_FEAT_ONESHOT,
+        .rating         = 200,
+        .set_next_event = pxa_osmr0_set_next_event,
+        .set_mode       = pxa_osmr0_set_mode,
         .suspend        = pxa_timer_suspend,
         .resume         = pxa_timer_resume,
 };
+
+static struct irqaction pxa_ost0_irq = {
+        .name           = "ost0",
+        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler        = pxa_ost0_interrupt,
+        .dev_id         = &ckevt_pxa_osmr0,
+};
+
+void __init pxa_timer_init(void)
+{
+        unsigned long clock_tick_rate = get_clock_tick_rate();
+
+        writel_relaxed(0, OIER);
+        writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+
+        setup_sched_clock(pxa_read_sched_clock, 32, clock_tick_rate);
+
+        ckevt_pxa_osmr0.cpumask = cpumask_of(0);
+
+        setup_irq(IRQ_OST0, &pxa_ost0_irq);
+
+        clocksource_mmio_init(OSCR, "oscr0", clock_tick_rate, 200, 32,
+                clocksource_mmio_readl_up);
+        clockevents_config_and_register(&ckevt_pxa_osmr0, clock_tick_rate,
+                MIN_OSCR_DELTA * 2, 0x7fffffff);
+}
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 233629edf7ee..9e7998d3635f 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -982,6 +982,6 @@ MACHINE_START(TOSA, "SHARP Tosa")
         .init_irq       = pxa25x_init_irq,
         .handle_irq       = pxa25x_handle_irq,
         .init_machine   = tosa_init,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = tosa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index fbbcbed4d1d4..c58043462acd 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -561,7 +561,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 
@@ -573,6 +573,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index c773e4dded64..9c363c081d3f 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -997,7 +997,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = viper_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = viper_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 491b6c9a2a9b..aa89488f961e 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -719,7 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = vpac270_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 4275713ccd10..13b1d4586d7d 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -185,7 +185,7 @@ MACHINE_START(XCEP, "Iskratel XCEP")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa25x_init_irq,
         .handle_irq     = pxa25x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .restart        = pxa_restart,
 MACHINE_END
 
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 97529face7aa..989903a7e467 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -722,7 +722,7 @@ MACHINE_START(ZIPIT2, "Zipit Z2")
         .nr_irqs        = PXA_NR_IRQS,
         .init_irq       = pxa27x_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = z2_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index abd3aa145083..f5d436434566 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -910,7 +910,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
         .nr_irqs        = ZEUS_NR_IRQS,
         .init_irq       = zeus_init_irq,
         .handle_irq     = pxa27x_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = zeus_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 226279fac9d4..1f00d650ac27 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -428,7 +428,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
         .nr_irqs        = ZYLONITE_NR_IRQS,
         .init_irq       = pxa3xx_init_irq,
         .handle_irq     = pxa3xx_handle_irq,
-        .timer          = &pxa_timer,
+        .init_time      = pxa_timer_init,
         .init_machine   = zylonite_init,
         .restart        = pxa_restart,
 MACHINE_END
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 682467480588..1d5ee5c9a1dc 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -42,7 +42,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
 
-#include <asm/hardware/gic.h>
 
 #include <mach/platform.h>
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-realview/include/mach/uncompress.h b/arch/arm/mach-realview/include/mach/uncompress.h
index 83050378ffd2..cfa30d21783b 100644
--- a/arch/arm/mach-realview/include/mach/uncompress.h
+++ b/arch/arm/mach-realview/include/mach/uncompress.h
@@ -75,4 +75,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 300f7064465d..98e3052b7933 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -14,7 +14,6 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/smp_scu.h>
 
@@ -59,8 +58,6 @@ static void __init realview_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init realview_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 28511d43637a..5b1c8bfe6fa9 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -27,13 +27,13 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_twd.h>
 
@@ -418,10 +418,6 @@ static void __init realview_eb_timer_init(void)
         realview_eb_twd_init();
 }
 
-static struct sys_timer realview_eb_timer = {
-        .init           = realview_eb_timer_init,
-};
-
 static void realview_eb_restart(char mode, const char *cmd)
 {
         void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -472,8 +468,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
         .map_io         = realview_eb_map_io,
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
-        .timer          = &realview_eb_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = realview_eb_timer_init,
         .init_machine   = realview_eb_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 07d6672ddae7..d5e83a1f6982 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -29,13 +29,13 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
@@ -329,10 +329,6 @@ static void __init realview_pb1176_timer_init(void)
         realview_timer_init(IRQ_DC1176_TIMER0);
 }
 
-static struct sys_timer realview_pb1176_timer = {
-        .init           = realview_pb1176_timer_init,
-};
-
 static void realview_pb1176_restart(char mode, const char *cmd)
 {
         void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -384,8 +380,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
         .map_io         = realview_pb1176_map_io,
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
-        .timer          = &realview_pb1176_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = realview_pb1176_timer_init,
         .init_machine   = realview_pb1176_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 7ed53d75350f..c3cfe213b5e6 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -27,13 +27,13 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/smp_twd.h>
 
@@ -316,10 +316,6 @@ static void __init realview_pb11mp_timer_init(void)
         realview_pb11mp_twd_init();
 }
 
-static struct sys_timer realview_pb11mp_timer = {
-        .init           = realview_pb11mp_timer_init,
-};
-
 static void realview_pb11mp_restart(char mode, const char *cmd)
 {
         void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -367,8 +363,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
         .map_io         = realview_pb11mp_map_io,
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
-        .timer          = &realview_pb11mp_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = realview_pb11mp_timer_init,
         .init_machine   = realview_pb11mp_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 9992431b8a15..dde652a59620 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -27,12 +27,12 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -264,10 +264,6 @@ static void __init realview_pba8_timer_init(void)
         realview_timer_init(IRQ_PBA8_TIMER0_1);
 }
 
-static struct sys_timer realview_pba8_timer = {
-        .init           = realview_pba8_timer_init,
-};
-
 static void realview_pba8_restart(char mode, const char *cmd)
 {
         void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
@@ -308,8 +304,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
         .map_io         = realview_pba8_map_io,
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
-        .timer          = &realview_pba8_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = realview_pba8_timer_init,
         .init_machine   = realview_pba8_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 4f486f05108a..54f0185b01e3 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -26,13 +26,13 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-realview.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 #include <asm/smp_twd.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include <asm/mach/arch.h>
@@ -324,10 +324,6 @@ static void __init realview_pbx_timer_init(void)
         realview_pbx_twd_init();
 }
 
-static struct sys_timer realview_pbx_timer = {
-        .init           = realview_pbx_timer_init,
-};
-
 static void realview_pbx_fixup(struct tag *tags, char **from,
                                struct meminfo *meminfo)
 {
@@ -404,8 +400,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
         .map_io         = realview_pbx_map_io,
         .init_early     = realview_init_early,
         .init_irq       = gic_init_irq,
-        .timer          = &realview_pbx_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = realview_pbx_timer_init,
         .init_machine   = realview_pbx_init,
 #ifdef CONFIG_ZONE_DMA
         .dma_zone_size  = SZ_256M,
diff --git a/arch/arm/mach-rpc/include/mach/uncompress.h b/arch/arm/mach-rpc/include/mach/uncompress.h
index 9cd9bcdad6cc..0fd4b0b8ef22 100644
--- a/arch/arm/mach-rpc/include/mach/uncompress.h
+++ b/arch/arm/mach-rpc/include/mach/uncompress.h
@@ -189,8 +189,3 @@ static void arch_decomp_setup(void)
         if (nr_pages * page_size < 4096*1024) error("<4M of mem\n");
 }
 #endif
-
-/*
- * nothing to do
- */
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index f3fa259ce01f..a302cf5e0fc7 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -211,7 +211,7 @@ static void rpc_restart(char mode, const char *cmd)
         soft_restart(0);
 }
 
-extern struct sys_timer ioc_timer;
+void ioc_timer_init(void);
 
 MACHINE_START(RISCPC, "Acorn-RiscPC")
         /* Maintainer: Russell King */
@@ -220,6 +220,6 @@ MACHINE_START(RISCPC, "Acorn-RiscPC")
         .reserve_lp1    = 1,
         .map_io         = rpc_map_io,
         .init_irq       = rpc_init_irq,
-        .timer          = &ioc_timer,
+        .init_time      = ioc_timer_init,
         .restart        = rpc_restart,
 MACHINE_END
diff --git a/arch/arm/mach-rpc/time.c b/arch/arm/mach-rpc/time.c
index 581fca934bb3..9a6def14df01 100644
--- a/arch/arm/mach-rpc/time.c
+++ b/arch/arm/mach-rpc/time.c
@@ -24,7 +24,7 @@
 
 #include <asm/mach/time.h>
 
-unsigned long ioc_timer_gettimeoffset(void)
+static u32 ioc_timer_gettimeoffset(void)
 {
         unsigned int count1, count2, status;
         long offset;
@@ -56,7 +56,7 @@ unsigned long ioc_timer_gettimeoffset(void)
         }
 
         offset = (LATCH - offset) * (tick_nsec / 1000);
-        return (offset + LATCH/2) / LATCH;
+        return ((offset + LATCH/2) / LATCH) * 1000;
 }
 
 void __init ioctime_init(void)
@@ -82,14 +82,9 @@ static struct irqaction ioc_timer_irq = {
 /*
  * Set up timer interrupt.
  */
-static void __init ioc_timer_init(void)
+void __init ioc_timer_init(void)
 {
+        arch_gettimeoffset = ioc_timer_gettimeoffset;
         ioctime_init();
         setup_irq(IRQ_TIMER0, &ioc_timer_irq);
 }
-
-struct sys_timer ioc_timer = {
-        .init           = ioc_timer_init,
-        .offset         = ioc_timer_gettimeoffset,
-};
-
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
deleted file mode 100644
index 68d89cb96af0..000000000000
--- a/arch/arm/mach-s3c2410/Kconfig
+++ /dev/null
@@ -1,20 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# cpu frequency scaling support
-
-config S3C2410_CPUFREQ
-        bool
-        depends on CPU_FREQ_S3C24XX && CPU_S3C2410
-        select S3C2410_CPUFREQ_UTILS
-        help
-          CPU Frequency scaling support for S3C2410
-
-config S3C2410_PLLTABLE
-        bool
-        depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
-        default y
-        help
-          Select the PLL table for the S3C2410
-
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
deleted file mode 100644
index 6b9a316e0041..000000000000
--- a/arch/arm/mach-s3c2410/Makefile
+++ /dev/null
@@ -1,14 +0,0 @@
-# arch/arm/mach-s3c2410/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y                           :=
-obj-m                           :=
-obj-n                           :=
-obj-                            :=
-
-obj-$(CONFIG_S3C2410_CPUFREQ)   += cpu-freq.o
-obj-$(CONFIG_S3C2410_PLLTABLE)  += pll.o
-
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
deleted file mode 100644
index 495f6928cbaa..000000000000
--- a/arch/arm/mach-s3c2412/Kconfig
+++ /dev/null
@@ -1,13 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-# Note, the S3C2412 IOtiming support is in plat-s3c24xx
-
-config S3C2412_CPUFREQ
-        bool
-        depends on CPU_FREQ_S3C24XX && CPU_S3C2412
-        default y
-        select S3C2412_IOTIMING
-        help
-          CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile
deleted file mode 100644
index 41a6c279fb2f..000000000000
--- a/arch/arm/mach-s3c2412/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# arch/arm/mach-s3c2412/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y                           :=
-obj-m                           :=
-obj-n                           :=
-obj-                            :=
-
-obj-$(CONFIG_S3C2412_CPUFREQ)   += cpu-freq.o
diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c
deleted file mode 100644
index 4526f6ba31a8..000000000000
--- a/arch/arm/mach-s3c2412/gpio.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/gpio.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * http://armlinux.simtec.co.uk/.
- *
- * S3C2412/S3C2413 specific GPIO support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-
-#include <plat/gpio-core.h>
-
-int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state)
-{
-        struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin);
-        unsigned long offs = pin - chip->chip.base;
-        unsigned long flags;
-        unsigned long slpcon;
-
-        offs *= 2;
-
-        if (pin < S3C2410_GPB(0))
-                return -EINVAL;
-
-        if (pin >= S3C2410_GPF(0) &&
-            pin <= S3C2410_GPG(16))
-                return -EINVAL;
-
-        if (pin > S3C2410_GPH(16))
-                return -EINVAL;
-
-        local_irq_save(flags);
-
-        slpcon = __raw_readl(chip->base + 0x0C);
-
-        slpcon &= ~(3 << offs);
-        slpcon |= state << offs;
-
-        __raw_writel(slpcon, chip->base + 0x0C);
-
-        local_irq_restore(flags);
-
-        return 0;
-}
-
-EXPORT_SYMBOL(s3c2412_gpio_set_sleepcfg);
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
deleted file mode 100644
index a4d7fd27bec5..000000000000
--- a/arch/arm/mach-s3c2440/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config S3C2440_CPUFREQ
-        bool "S3C2440/S3C2442 CPU Frequency scaling support"
-        depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
-        default y
-        select S3C2410_CPUFREQ_UTILS
-        help
-          CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
-
-config S3C2440_XTAL_12000000
-        bool
-        help
-          Indicate that the build needs to support 12MHz system
-          crystal.
-
-config S3C2440_XTAL_16934400
-        bool
-        help
-          Indicate that the build needs to support 16.9344MHz system
-          crystal.
-
-config S3C2440_PLL_12000000
-        bool
-        depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
-        default y if CPU_FREQ_S3C24XX_PLL
-        help
-          PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
-
-config S3C2440_PLL_16934400
-        bool
-        depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
-        default y if CPU_FREQ_S3C24XX_PLL
-        help
-          PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
deleted file mode 100644
index c46092439814..000000000000
--- a/arch/arm/mach-s3c2440/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# arch/arm/mach-s3c2440/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y                           :=
-obj-m                           :=
-obj-n                           :=
-obj-                            :=
-
-obj-$(CONFIG_CPU_S3C2440)       += dsc.o
-
-obj-$(CONFIG_S3C2440_CPUFREQ)   += s3c2440-cpufreq.o
-
-obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
-obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
diff --git a/arch/arm/mach-s3c2440/dsc.c b/arch/arm/mach-s3c2440/dsc.c
deleted file mode 100644
index 9ea66e31f626..000000000000
--- a/arch/arm/mach-s3c2440/dsc.c
+++ /dev/null
@@ -1,54 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/dsc.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *   Ben Dooks <ben@simtec.co.uk>
- *
- * Samsung S3C2440 Drive Strength Control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/io.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c244x.h>
-
-int s3c2440_set_dsc(unsigned int pin, unsigned int value)
-{
-        void __iomem *base;
-        unsigned long val;
-        unsigned long flags;
-        unsigned long mask;
-
-        base = (pin & S3C2440_SELECT_DSC1) ? S3C2440_DSC1 : S3C2440_DSC0;
-        mask = 3 << S3C2440_DSC_GETSHIFT(pin);
-
-        local_irq_save(flags);
-
-        val = __raw_readl(base);
-        val &= ~mask;
-        val |= value & mask;
-        __raw_writel(val, base);
-
-        local_irq_restore(flags);
-        return 0;
-}
-
-EXPORT_SYMBOL(s3c2440_set_dsc);
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 7079a70b1ab8..37f513d1588e 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -9,6 +9,15 @@
 
 if ARCH_S3C24XX
 
+config PLAT_S3C24XX
+        def_bool y
+        select ARCH_REQUIRE_GPIOLIB
+        select NO_IOPORT
+        select S3C_DEV_NAND
+        select IRQ_DOMAIN
+        help
+          Base platform code for any Samsung S3C24XX device
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -83,6 +92,17 @@ config CPU_S3C2443
 
 # common code
 
+config S3C2410_CLOCK
+        bool
+        help
+          Clock code for the S3C2410, and similar processors which
+          is currently includes the S3C2410, S3C2440, S3C2442.
+
+config S3C24XX_DCLK
+        bool
+        help
+          Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
+
 config S3C24XX_SMDK
         bool
         help
@@ -111,6 +131,22 @@ config S3C24XX_SETUP_TS
         help
           Compile in platform device definition for Samsung TouchScreen.
 
+config S3C24XX_DMA
+        bool "S3C2410 DMA support"
+        depends on ARCH_S3C24XX
+        select S3C_DMA
+        help
+          S3C2410 DMA support. This is needed for drivers like sound which
+          use the S3C2410's DMA system to move data to and from the
+          peripheral blocks.
+
+config S3C2410_DMA_DEBUG
+        bool "S3C2410 DMA support debug"
+        depends on ARCH_S3C24XX && S3C2410_DMA
+        help
+          Enable debugging output for the DMA code. This option sends info
+          to the kernel log, at priority KERN_DEBUG.
+
 config S3C2410_DMA
         bool
         depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -123,10 +159,92 @@ config S3C2410_PM
         help
           Power Management code common to S3C2410 and better
 
+# low-level serial option nodes
+
+config CPU_LLSERIAL_S3C2410_ONLY
+        bool
+        default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
+
+config CPU_LLSERIAL_S3C2440_ONLY
+        bool
+        default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
+
+config CPU_LLSERIAL_S3C2410
+        bool
+        help
+          Selected if there is an S3C2410 (or register compatible) serial
+          low-level implementation needed
+
+config CPU_LLSERIAL_S3C2440
+        bool
+        help
+          Selected if there is an S3C2440 (or register compatible) serial
+          low-level implementation needed
+
+# gpio configurations
+
+config S3C24XX_GPIO_EXTRA
+        int
+        default 128 if S3C24XX_GPIO_EXTRA128
+        default 64 if S3C24XX_GPIO_EXTRA64
+        default 16 if ARCH_H1940
+        default 0
+
+config S3C24XX_GPIO_EXTRA64
+        bool
+        help
+          Add an extra 64 gpio numbers to the available GPIO pool. This is
+          available for boards that need extra gpios for external devices.
+
+config S3C24XX_GPIO_EXTRA128
+        bool
+        help
+          Add an extra 128 gpio numbers to the available GPIO pool. This is
+          available for boards that need extra gpios for external devices.
+
+# cpu frequency items common between s3c2410 and s3c2440/s3c2442
+
+config S3C2410_IOTIMING
+        bool
+        depends on CPU_FREQ_S3C24XX
+        help
+          Internal node to select io timing code that is common to the s3c2410
+          and s3c2440/s3c2442 cpu frequency support.
+
+config S3C2410_CPUFREQ_UTILS
+        bool
+        depends on CPU_FREQ_S3C24XX
+        help
+          Internal node to select timing code that is common to the s3c2410
+          and s3c2440/s3c244 cpu frequency support.
+
+# cpu frequency support common to s3c2412, s3c2413 and s3c2442
+
+config S3C2412_IOTIMING
+        bool
+        depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
+        help
+          Intel node to select io timing code that is common to the s3c2412
+          and the s3c2443.
+
 # cpu-specific sections
 
 if CPU_S3C2410
 
+config S3C2410_CPUFREQ
+        bool
+        depends on CPU_FREQ_S3C24XX && CPU_S3C2410
+        select S3C2410_CPUFREQ_UTILS
+        help
+          CPU Frequency scaling support for S3C2410
+
+config S3C2410_PLL
+        bool
+        depends on S3C2410_CPUFREQ && CPU_FREQ_S3C24XX_PLL
+        default y
+        help
+          Select the PLL table for the S3C2410
+
 config S3C24XX_SIMTEC_NOR
         bool
         help
@@ -267,6 +385,14 @@ config CPU_S3C2412_ONLY
                    !CPU_S3C2443 && CPU_S3C2412
         default y
 
+config S3C2412_CPUFREQ
+        bool
+        depends on CPU_FREQ_S3C24XX && CPU_S3C2412
+        default y
+        select S3C2412_IOTIMING
+        help
+          CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
+
 config S3C2412_DMA
         bool
         help
@@ -367,11 +493,45 @@ endif	# CPU_S3C2416
 
 if CPU_S3C2440
 
+config S3C2440_CPUFREQ
+        bool "S3C2440/S3C2442 CPU Frequency scaling support"
+        depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
+        default y
+        select S3C2410_CPUFREQ_UTILS
+        help
+          CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
+
 config S3C2440_DMA
         bool
         help
           Support for S3C2440 specific DMA code5A
 
+config S3C2440_XTAL_12000000
+        bool
+        help
+          Indicate that the build needs to support 12MHz system
+          crystal.
+
+config S3C2440_XTAL_16934400
+        bool
+        help
+          Indicate that the build needs to support 16.9344MHz system
+          crystal.
+
+config S3C2440_PLL_12000000
+        bool
+        depends on S3C2440_CPUFREQ && S3C2440_XTAL_12000000
+        default y if CPU_FREQ_S3C24XX_PLL
+        help
+          PLL tables for S3C2440 or S3C2442 CPUs with 12MHz crystals.
+
+config S3C2440_PLL_16934400
+        bool
+        depends on S3C2440_CPUFREQ && S3C2440_XTAL_16934400
+        default y if CPU_FREQ_S3C24XX_PLL
+        help
+          PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
+
 comment "S3C2440 Boards"
 
 #
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 0ab6ab15da4c..af53d27d5c36 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -14,26 +14,32 @@ obj-				:=
 
 # core
 
-obj-y                           += common.o
+obj-y                           += common.o irq.o
 
 obj-$(CONFIG_CPU_S3C2410)       += s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ)   += cpufreq-s3c2410.o
 obj-$(CONFIG_S3C2410_DMA)       += dma-s3c2410.o
+obj-$(CONFIG_S3C2410_PLL)       += pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)        += pm-s3c2410.o sleep-s3c2410.o
 
 obj-$(CONFIG_CPU_S3C2412)       += s3c2412.o irq-s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_S3C2412_CPUFREQ)   += cpufreq-s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)       += dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)        += pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)  += sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)       += s3c2416.o irq-s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)       += s3c2416.o clock-s3c2416.o
 obj-$(CONFIG_S3C2416_PM)        += pm-s3c2416.o
 
 obj-$(CONFIG_CPU_S3C2440)       += s3c2440.o irq-s3c2440.o clock-s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)       += s3c2442.o
 obj-$(CONFIG_CPU_S3C244X)       += s3c244x.o irq-s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_S3C2440_CPUFREQ)   += cpufreq-s3c2440.o
 obj-$(CONFIG_S3C2440_DMA)       += dma-s3c2440.o
+obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
+obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)       += s3c2443.o irq-s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)       += s3c2443.o clock-s3c2443.o
 
 # PM
 
@@ -41,9 +47,21 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
+obj-$(CONFIG_S3C24XX_DCLK)      += clock-dclk.o
+obj-$(CONFIG_S3C24XX_DMA)       += dma.o
+
+obj-$(CONFIG_S3C2410_CLOCK)     += clock-s3c2410.o
+obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
+
+obj-$(CONFIG_S3C2410_IOTIMING)  += iotiming-s3c2410.o
+obj-$(CONFIG_S3C2412_IOTIMING)  += iotiming-s3c2412.o
+
 obj-$(CONFIG_S3C2443_COMMON)    += common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)       += dma-s3c2443.o
 
+obj-$(CONFIG_CPU_FREQ_S3C24XX)  += cpufreq.o
+obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpufreq-debugfs.o
+
 #
 # machine support
 # following is ordered alphabetically by option text.
diff --git a/arch/arm/mach-s3c24xx/anubis.h b/arch/arm/mach-s3c24xx/anubis.h
new file mode 100644
index 000000000000..2691665f27d9
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/anubis.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2005 Simtec Electronics
+ *      http://www.simtec.co.uk/products/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * ANUBIS - CPLD control constants
+ * ANUBIS - IRQ Number definitions
+ * ANUBIS - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_ANUBIS_H
+#define __MACH_S3C24XX_ANUBIS_H __FILE__
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define ANUBIS_CTRL1_NANDSEL            (0x3)
+
+/* IDREG - revision */
+
+#define ANUBIS_IDREG_REVMASK            (0x7)
+
+/* irq */
+
+#define ANUBIS_IRQ_IDE0                 IRQ_EINT2
+#define ANUBIS_IRQ_IDE1                 IRQ_EINT3
+#define ANUBIS_IRQ_ASIX                 IRQ_EINT1
+
+/* map */
+
+/* start peripherals off after the S3C2410 */
+
+#define ANUBIS_IOADDR(x)                (S3C2410_ADDR((x) + 0x01800000))
+
+#define ANUBIS_PA_CPLD                  (S3C2410_CS1 | (1<<26))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define ANUBIS_VA_CTRL1                 ANUBIS_IOADDR(0x00000000)
+#define ANUBIS_PA_CTRL1                 ANUBIS_PA_CPLD
+
+#define ANUBIS_VA_IDREG                 ANUBIS_IOADDR(0x00300000)
+#define ANUBIS_PA_IDREG                 (ANUBIS_PA_CPLD + (3 << 23))
+
+#define ANUBIS_IDEPRI                   ANUBIS_IOADDR(0x01000000)
+#define ANUBIS_IDEPRIAUX                ANUBIS_IOADDR(0x01100000)
+#define ANUBIS_IDESEC                   ANUBIS_IOADDR(0x01200000)
+#define ANUBIS_IDESECAUX                ANUBIS_IOADDR(0x01300000)
+
+#endif /* __MACH_S3C24XX_ANUBIS_H */
diff --git a/arch/arm/mach-s3c24xx/bast-ide.c b/arch/arm/mach-s3c24xx/bast-ide.c
index ba02cf8d80a2..3f0288f2f542 100644
--- a/arch/arm/mach-s3c24xx/bast-ide.c
+++ b/arch/arm/mach-s3c24xx/bast-ide.c
@@ -25,8 +25,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
+
+#include "bast.h"
 
 /* IDE ports */
 
@@ -34,12 +34,10 @@ static struct pata_platform_info bast_ide_platdata = {
         .ioport_shift   = 5,
 };
 
-#define IDE_CS  S3C2410_CS5
-
 static struct resource bast_ide0_resource[] = {
-        [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
-        [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
-        [2] = DEFINE_RES_IRQ(IRQ_IDE0),
+        [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRI, 8 * 0x20),
+        [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDEPRIAUX + (6 * 0x20), 0x20),
+        [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE0),
 };
 
 static struct platform_device bast_device_ide0 = {
@@ -55,9 +53,9 @@ static struct platform_device bast_device_ide0 = {
 };
 
 static struct resource bast_ide1_resource[] = {
-        [0] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
-        [1] = DEFINE_RES_MEM(IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
-        [2] = DEFINE_RES_IRQ(IRQ_IDE1),
+        [0] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESEC, 8 * 0x20),
+        [1] = DEFINE_RES_MEM(BAST_IDE_CS + BAST_PA_IDESECAUX + (6 * 0x20), 0x20),
+        [2] = DEFINE_RES_IRQ(BAST_IRQ_IDE1),
 };
 
 static struct platform_device bast_device_ide1 = {
diff --git a/arch/arm/mach-s3c24xx/bast-irq.c b/arch/arm/mach-s3c24xx/bast-irq.c
index ac7b2ad5c405..c0daa9590b4c 100644
--- a/arch/arm/mach-s3c24xx/bast-irq.c
+++ b/arch/arm/mach-s3c24xx/bast-irq.c
@@ -27,27 +27,20 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
-
+#include <asm/mach-types.h>
 #include <asm/mach/irq.h>
 
+#include <mach/hardware.h>
 #include <mach/regs-irq.h>
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
 
 #include <plat/irq.h>
 
-#if 0
-#include <asm/debug-ll.h>
-#endif
+#include "bast.h"
 
 #define irqdbf(x...)
 #define irqdbf2(x...)
 
-
 /* handle PC104 ISA interrupts from the system CPLD */
 
 /* table of ISA irq nos to the relevant mask... zero means
@@ -87,7 +80,7 @@ bast_pc104_mask(struct irq_data *data)
 static void
 bast_pc104_maskack(struct irq_data *data)
 {
-        struct irq_desc *desc = irq_desc + IRQ_ISA;
+        struct irq_desc *desc = irq_desc + BAST_IRQ_ISA;
 
         bast_pc104_mask(data);
         desc->irq_data.chip->irq_ack(&desc->irq_data);
@@ -122,7 +115,7 @@ bast_irq_pc104_demux(unsigned int irq,
         if (unlikely(stat == 0)) {
                 /* ack if we get an irq with nothing (ie, startup) */
 
-                desc = irq_desc + IRQ_ISA;
+                desc = irq_desc + BAST_IRQ_ISA;
                 desc->irq_data.chip->irq_ack(&desc->irq_data);
         } else {
                 /* handle the IRQ */
@@ -147,7 +140,7 @@ static __init int bast_irq_init(void)
 
                 __raw_writeb(0x0, BAST_VA_PC104_IRQMASK);
 
-                irq_set_chained_handler(IRQ_ISA, bast_irq_pc104_demux);
+                irq_set_chained_handler(BAST_IRQ_ISA, bast_irq_pc104_demux);
 
                 /* register our IRQs */
 
diff --git a/arch/arm/mach-s3c24xx/bast.h b/arch/arm/mach-s3c24xx/bast.h
new file mode 100644
index 000000000000..5c7534bae92d
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/bast.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * BAST - CPLD control constants
+ * BAST - IRQ Number definitions
+ * BAST - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_BAST_H
+#define __MACH_S3C24XX_BAST_H __FILE__
+
+/* CTRL1 - Audio LR routing */
+
+#define BAST_CPLD_CTRL1_LRCOFF          (0x00)
+#define BAST_CPLD_CTRL1_LRCADC          (0x01)
+#define BAST_CPLD_CTRL1_LRCDAC          (0x02)
+#define BAST_CPLD_CTRL1_LRCARM          (0x03)
+#define BAST_CPLD_CTRL1_LRMASK          (0x03)
+
+/* CTRL2 - NAND WP control, IDE Reset assert/check */
+
+#define BAST_CPLD_CTRL2_WNAND           (0x04)
+#define BAST_CPLD_CTLR2_IDERST          (0x08)
+
+/* CTRL3 - rom write control, CPLD identity */
+
+#define BAST_CPLD_CTRL3_IDMASK          (0x0e)
+#define BAST_CPLD_CTRL3_ROMWEN          (0x01)
+
+/* CTRL4 - 8bit LCD interface control/status */
+
+#define BAST_CPLD_CTRL4_LLAT            (0x01)
+#define BAST_CPLD_CTRL4_LCDRW           (0x02)
+#define BAST_CPLD_CTRL4_LCDCMD          (0x04)
+#define BAST_CPLD_CTRL4_LCDE2           (0x01)
+
+/* CTRL5 - DMA routing */
+
+#define BAST_CPLD_DMA0_PRIIDE           (0)
+#define BAST_CPLD_DMA0_SECIDE           (1)
+#define BAST_CPLD_DMA0_ISA15            (2)
+#define BAST_CPLD_DMA0_ISA36            (3)
+
+#define BAST_CPLD_DMA1_PRIIDE           (0 << 2)
+#define BAST_CPLD_DMA1_SECIDE           (1 << 2)
+#define BAST_CPLD_DMA1_ISA15            (2 << 2)
+#define BAST_CPLD_DMA1_ISA36            (3 << 2)
+
+/* irq numbers to onboard peripherals */
+
+#define BAST_IRQ_USBOC                  IRQ_EINT18
+#define BAST_IRQ_IDE0                   IRQ_EINT16
+#define BAST_IRQ_IDE1                   IRQ_EINT17
+#define BAST_IRQ_PCSERIAL1              IRQ_EINT15
+#define BAST_IRQ_PCSERIAL2              IRQ_EINT14
+#define BAST_IRQ_PCPARALLEL             IRQ_EINT13
+#define BAST_IRQ_ASIX                   IRQ_EINT11
+#define BAST_IRQ_DM9000                 IRQ_EINT10
+#define BAST_IRQ_ISA                    IRQ_EINT9
+#define BAST_IRQ_SMALERT                IRQ_EINT8
+
+/* map */
+
+/*
+ * ok, we've used up to 0x13000000, now we need to find space for the
+ * peripherals that live in the nGCS[x] areas, which are quite numerous
+ * in their space. We also have the board's CPLD to find register space
+ * for.
+ */
+
+#define BAST_IOADDR(x)                  (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define BAST_VA_CTRL1                   BAST_IOADDR(0x00000000)
+#define BAST_PA_CTRL1                   (S3C2410_CS5 | 0x7800000)
+
+#define BAST_VA_CTRL2                   BAST_IOADDR(0x00100000)
+#define BAST_PA_CTRL2                   (S3C2410_CS1 | 0x6000000)
+
+#define BAST_VA_CTRL3                   BAST_IOADDR(0x00200000)
+#define BAST_PA_CTRL3                   (S3C2410_CS1 | 0x6800000)
+
+#define BAST_VA_CTRL4                   BAST_IOADDR(0x00300000)
+#define BAST_PA_CTRL4                   (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define BAST_PA_PC104_IRQREQ            (S3C2410_CS5 | 0x6000000)
+#define BAST_VA_PC104_IRQREQ            BAST_IOADDR(0x00400000)
+
+#define BAST_PA_PC104_IRQRAW            (S3C2410_CS5 | 0x6800000)
+#define BAST_VA_PC104_IRQRAW            BAST_IOADDR(0x00500000)
+
+#define BAST_PA_PC104_IRQMASK           (S3C2410_CS5 | 0x7000000)
+#define BAST_VA_PC104_IRQMASK           BAST_IOADDR(0x00600000)
+
+#define BAST_PA_LCD_RCMD1               (0x8800000)
+#define BAST_VA_LCD_RCMD1               BAST_IOADDR(0x00700000)
+
+#define BAST_PA_LCD_WCMD1               (0x8000000)
+#define BAST_VA_LCD_WCMD1               BAST_IOADDR(0x00800000)
+
+#define BAST_PA_LCD_RDATA1              (0x9800000)
+#define BAST_VA_LCD_RDATA1              BAST_IOADDR(0x00900000)
+
+#define BAST_PA_LCD_WDATA1              (0x9000000)
+#define BAST_VA_LCD_WDATA1              BAST_IOADDR(0x00A00000)
+
+#define BAST_PA_LCD_RCMD2               (0xA800000)
+#define BAST_VA_LCD_RCMD2               BAST_IOADDR(0x00B00000)
+
+#define BAST_PA_LCD_WCMD2               (0xA000000)
+#define BAST_VA_LCD_WCMD2               BAST_IOADDR(0x00C00000)
+
+#define BAST_PA_LCD_RDATA2              (0xB800000)
+#define BAST_VA_LCD_RDATA2              BAST_IOADDR(0x00D00000)
+
+#define BAST_PA_LCD_WDATA2              (0xB000000)
+#define BAST_VA_LCD_WDATA2              BAST_IOADDR(0x00E00000)
+
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x00000000 to 0x01000000 16MB ISA IO space
+ * 0x01000000 to 0x02000000 16MB ISA memory space
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
+ * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define BAST_VA_MULTISPACE              (0xE0000000)
+
+#define BAST_VA_ISAIO                   (BAST_VA_MULTISPACE + 0x00000000)
+#define BAST_VA_ISAMEM                  (BAST_VA_MULTISPACE + 0x01000000)
+#define BAST_VA_IDEPRI                  (BAST_VA_MULTISPACE + 0x02000000)
+#define BAST_VA_IDEPRIAUX               (BAST_VA_MULTISPACE + 0x02100000)
+#define BAST_VA_IDESEC                  (BAST_VA_MULTISPACE + 0x02200000)
+#define BAST_VA_IDESECAUX               (BAST_VA_MULTISPACE + 0x02300000)
+#define BAST_VA_ASIXNET                 (BAST_VA_MULTISPACE + 0x02400000)
+#define BAST_VA_DM9000                  (BAST_VA_MULTISPACE + 0x02500000)
+#define BAST_VA_SUPERIO                 (BAST_VA_MULTISPACE + 0x02600000)
+
+#define BAST_VAM_CS2                    (0x00000000)
+#define BAST_VAM_CS3                    (0x04000000)
+#define BAST_VAM_CS4                    (0x08000000)
+#define BAST_VAM_CS5                    (0x0C000000)
+
+/* physical offset addresses for the peripherals */
+
+#define BAST_PA_ISAIO                   (0x00000000)
+#define BAST_PA_ASIXNET                 (0x01000000)
+#define BAST_PA_SUPERIO                 (0x01800000)
+#define BAST_PA_IDEPRI                  (0x02000000)
+#define BAST_PA_IDEPRIAUX               (0x02800000)
+#define BAST_PA_IDESEC                  (0x03000000)
+#define BAST_PA_IDESECAUX               (0x03800000)
+#define BAST_PA_ISAMEM                  (0x04000000)
+#define BAST_PA_DM9000                  (0x05000000)
+
+/* some configurations for the peripherals */
+
+#define BAST_PCSIO                      (BAST_VA_SUPERIO + BAST_VAM_CS2)
+
+#define BAST_ASIXNET_CS                 BAST_VAM_CS5
+#define BAST_DM9000_CS                  BAST_VAM_CS4
+
+#define BAST_IDE_CS     S3C2410_CS5
+
+#endif /* __MACH_S3C24XX_BAST_H */
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
index f95d3268ae1f..1edd9b2369c5 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/mach-s3c24xx/clock-dclk.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/clock-dclk.c
- *
+/*
  * Copyright (c) 2004-2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *      http://armlinux.simtec.co.uk/
diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
index 25dc4d4397b1..641266f3d152 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-clock.c
+++ b/arch/arm/mach-s3c24xx/clock-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/clock.c
- *
+/*
  * Copyright (c) 2006 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index c2f596e7bc2d..ed6276fcaa3b 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -15,4 +15,6 @@
 void s3c2410_restart(char mode, const char *cmd);
 void s3c244x_restart(char mode, const char *cmd);
 
+extern struct syscore_ops s3c24xx_irq_syscore_ops;
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
index c7adad0e8de0..9b7b4289d66c 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-debugfs.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq-debugfs.c
- *
+/*
  * Copyright (c) 2009 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
index 5404535da1a5..cfa0dd8723ec 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/cpu-freq.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -81,7 +80,7 @@ static int s3c2410_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
         cfg->divs.p_divisor = pdiv;
         cfg->divs.h_divisor = hdiv;
 
-        return 0      ;
+        return 0;
 }
 
 static struct s3c_cpufreq_info s3c2410_cpufreq_info = {
@@ -131,7 +130,6 @@ static int __init s3c2410_cpufreq_init(void)
 {
         return subsys_interface_register(&s3c2410_cpufreq_interface);
 }
-
 arch_initcall(s3c2410_cpufreq_init);
 
 static int s3c2410a_cpufreq_add(struct device *dev,
@@ -159,5 +157,4 @@ static int __init s3c2410a_cpufreq_init(void)
 {
         return subsys_interface_register(&s3c2410a_cpufreq_interface);
 }
-
 arch_initcall(s3c2410a_cpufreq_init);
diff --git a/arch/arm/mach-s3c2412/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
index 125be7d5fa60..8bf0f3a77476 100644
--- a/arch/arm/mach-s3c2412/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/cpu-freq.c
- *
+/*
  * Copyright 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -26,12 +25,13 @@
 #include <asm/mach/map.h>
 
 #include <mach/regs-clock.h>
-#include <mach/regs-s3c2412-mem.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/cpu-freq-core.h>
 
+#include "s3c2412.h"
+
 /* our clock resources. */
 static struct clk *xtal;
 static struct clk *fclk;
@@ -111,7 +111,7 @@ static int s3c2412_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
 
         return 0;
 
- invalid:
+invalid:
         return -EINVAL;
 }
 
@@ -255,5 +255,4 @@ static int s3c2412_cpufreq_init(void)
 {
         return subsys_interface_register(&s3c2412_cpufreq_interface);
 }
-
 arch_initcall(s3c2412_cpufreq_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
index 61776764d9f4..72b2cc8a5a85 100644
--- a/arch/arm/mach-s3c2440/s3c2440-cpufreq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-s3c2440.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
- *
+/*
  * Copyright (c) 2006-2009 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -310,5 +309,4 @@ static int s3c2442_cpufreq_init(void)
 {
         return subsys_interface_register(&s3c2442_cpufreq_interface);
 }
-
 subsys_initcall(s3c2442_cpufreq_init);
diff --git a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
index 43ea80190d87..ddd8280e3875 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-cpufreq-utils.c
- *
+/*
  * Copyright (c) 2009 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -17,11 +16,12 @@
 #include <linux/io.h>
 
 #include <mach/map.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu-freq-core.h>
 
+#include "regs-mem.h"
+
 /**
  * s3c2410_cpufreq_setrefresh - set SDRAM refresh value
  * @cfg: The frequency configuration
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/mach-s3c24xx/cpufreq.c
index 468079938884..5f181e733eee 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/mach-s3c24xx/cpufreq.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/cpu-freq.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2410.c b/arch/arm/mach-s3c24xx/dma-s3c2410.c
index 4803338cf56e..25d085adc93c 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2410.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2412.c b/arch/arm/mach-s3c24xx/dma-s3c2412.c
index 38472ac920ff..d2408ba372cb 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2412.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2440.c b/arch/arm/mach-s3c24xx/dma-s3c2440.c
index 5f0a0c8ef84f..0b86e74d104f 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2440.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2440.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/mach-s3c24xx/dma-s3c2443.c b/arch/arm/mach-s3c24xx/dma-s3c2443.c
index 2d94228d2866..05536254a3f8 100644
--- a/arch/arm/mach-s3c24xx/dma-s3c2443.c
+++ b/arch/arm/mach-s3c24xx/dma-s3c2443.c
@@ -27,7 +27,6 @@
 #include <mach/regs-gpio.h>
 #include <plat/regs-ac97.h>
 #include <plat/regs-dma.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/regs-sdi.h>
 #include <plat/regs-iis.h>
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/mach-s3c24xx/dma.c
index ba3e76c95504..aab64909e9a3 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/mach-s3c24xx/dma.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/dma.c
- *
+/*
  * Copyright 2003-2006 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24xx/include/mach/gta02.h b/arch/arm/mach-s3c24xx/gta02.h
index 217393482153..9430a71e9184 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gta02.h
+++ b/arch/arm/mach-s3c24xx/gta02.h
@@ -1,5 +1,13 @@
-#ifndef _GTA02_H
-#define _GTA02_H
+/*
+ * GTA02 header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_GTA02_H
+#define __MACH_S3C24XX_GTA02_H __FILE__
 
 #include <mach/regs-gpio.h>
 
@@ -12,4 +20,4 @@
 
 #define GTA02_IRQ_PCF50633      IRQ_EINT9
 
-#endif /* _GTA02_H */
+#endif /* __MACH_S3C24XX_GTA02_H */
diff --git a/arch/arm/mach-s3c24xx/h1940-bluetooth.c b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
index 3f40c61b6e02..5b98bfd1df43 100644
--- a/arch/arm/mach-s3c24xx/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c24xx/h1940-bluetooth.c
@@ -19,10 +19,10 @@
 #include <linux/gpio.h>
 #include <linux/rfkill.h>
 
-#include <mach/regs-gpio.h>
 #include <mach/hardware.h>
-#include <mach/h1940-latch.h>
-#include <mach/h1940.h>
+#include <mach/regs-gpio.h>
+
+#include "h1940.h"
 
 #define DRV_NAME "h1940-bt"
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h b/arch/arm/mach-s3c24xx/h1940.h
index fc897d3a056c..2950cc466840 100644
--- a/arch/arm/mach-s3c24xx/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c24xx/h1940.h
@@ -1,20 +1,30 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+/*
+ * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
  *
  * Copyright (c) 2005 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
  *
- *  iPAQ H1940 series - latch definitions
+ * iPAQ H1940 series definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_H1940_LATCH_H
-#define __ASM_ARCH_H1940_LATCH_H
+#ifndef __MACH_S3C24XX_H1940_H
+#define __MACH_S3C24XX_H1940_H __FILE__
 
-#include <asm/gpio.h>
+#define H1940_SUSPEND_CHECKSUM          (0x30003ff8)
+#define H1940_SUSPEND_RESUMEAT          (0x30081000)
+#define H1940_SUSPEND_CHECK             (0x30080000)
+
+extern void h1940_pm_return(void);
+extern int h1940_led_blink_set(unsigned gpio, int state,
+                               unsigned long *delay_on,
+                               unsigned long *delay_off);
+
+#include <linux/gpio.h>
 
 #define H1940_LATCH_GPIO(x)             (S3C_GPIO_END + (x))
 
@@ -40,4 +50,4 @@
 #define H1940_LATCH_LED_GREEN           H1940_LATCH_GPIO(14)
 #define H1940_LATCH_LED_FLASH           H1940_LATCH_GPIO(15)
 
-#endif /* __ASM_ARCH_H1940_LATCH_H */
+#endif /* __MACH_S3C24XX_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h b/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
deleted file mode 100644
index 1b614d5a81f3..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-cpld.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-cpld.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *      http://www.simtec.co.uk/products/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISCPLD_H
-#define __ASM_ARCH_ANUBISCPLD_H
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define ANUBIS_CTRL1_NANDSEL            (0x3)
-
-/* IDREG - revision */
-
-#define ANUBIS_IDREG_REVMASK            (0x7)
-
-#endif /* __ASM_ARCH_ANUBISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h b/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
deleted file mode 100644
index a2a328134e34..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-irq.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-irq.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *      http://www.simtec.co.uk/products/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- *  ANUBIS - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_ANUBISIRQ_H
-#define __ASM_ARCH_ANUBISIRQ_H
-
-#define IRQ_IDE0       IRQ_EINT2
-#define IRQ_IDE1       IRQ_EINT3
-#define IRQ_ASIX       IRQ_EINT1
-
-#endif /* __ASM_ARCH_ANUBISIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h b/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
deleted file mode 100644
index c9deb3a5b2c3..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/anubis-map.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/anubis-map.h
- *
- * Copyright (c) 2005 Simtec Electronics
- *      http://www.simtec.co.uk/products/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * ANUBIS - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-#ifndef __ASM_ARCH_ANUBISMAP_H
-#define __ASM_ARCH_ANUBISMAP_H
-
-/* start peripherals off after the S3C2410 */
-
-#define ANUBIS_IOADDR(x)        (S3C2410_ADDR((x) + 0x01800000))
-
-#define ANUBIS_PA_CPLD          (S3C2410_CS1 | (1<<26))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define ANUBIS_VA_CTRL1     ANUBIS_IOADDR(0x00000000)    /* 0x01800000 */
-#define ANUBIS_PA_CTRL1     (ANUBIS_PA_CPLD)
-
-#define ANUBIS_VA_IDREG     ANUBIS_IOADDR(0x00300000)    /* 0x01B00000 */
-#define ANUBIS_PA_IDREG     (ANUBIS_PA_CPLD + (3<<23))
-
-#define ANUBIS_IDEPRI       ANUBIS_IOADDR(0x01000000)
-#define ANUBIS_IDEPRIAUX    ANUBIS_IOADDR(0x01100000)
-#define ANUBIS_IDESEC       ANUBIS_IOADDR(0x01200000)
-#define ANUBIS_IDESECAUX    ANUBIS_IOADDR(0x01300000)
-
-#endif /* __ASM_ARCH_ANUBISMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h b/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
deleted file mode 100644
index bee2a7a932a0..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-cpld.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * BAST - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTCPLD_H
-#define __ASM_ARCH_BASTCPLD_H
-
-/* CTRL1 - Audio LR routing */
-
-#define BAST_CPLD_CTRL1_LRCOFF      (0x00)
-#define BAST_CPLD_CTRL1_LRCADC      (0x01)
-#define BAST_CPLD_CTRL1_LRCDAC      (0x02)
-#define BAST_CPLD_CTRL1_LRCARM      (0x03)
-#define BAST_CPLD_CTRL1_LRMASK      (0x03)
-
-/* CTRL2 - NAND WP control, IDE Reset assert/check */
-
-#define BAST_CPLD_CTRL2_WNAND       (0x04)
-#define BAST_CPLD_CTLR2_IDERST      (0x08)
-
-/* CTRL3 - rom write control, CPLD identity */
-
-#define BAST_CPLD_CTRL3_IDMASK      (0x0e)
-#define BAST_CPLD_CTRL3_ROMWEN      (0x01)
-
-/* CTRL4 - 8bit LCD interface control/status */
-
-#define BAST_CPLD_CTRL4_LLAT        (0x01)
-#define BAST_CPLD_CTRL4_LCDRW       (0x02)
-#define BAST_CPLD_CTRL4_LCDCMD      (0x04)
-#define BAST_CPLD_CTRL4_LCDE2       (0x01)
-
-/* CTRL5 - DMA routing */
-
-#define BAST_CPLD_DMA0_PRIIDE      (0<<0)
-#define BAST_CPLD_DMA0_SECIDE      (1<<0)
-#define BAST_CPLD_DMA0_ISA15       (2<<0)
-#define BAST_CPLD_DMA0_ISA36       (3<<0)
-
-#define BAST_CPLD_DMA1_PRIIDE      (0<<2)
-#define BAST_CPLD_DMA1_SECIDE      (1<<2)
-#define BAST_CPLD_DMA1_ISA15       (2<<2)
-#define BAST_CPLD_DMA1_ISA36       (3<<2)
-
-#endif /* __ASM_ARCH_BASTCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h b/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
deleted file mode 100644
index cac428c42e7f..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-irq.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_BASTIRQ_H
-#define __ASM_ARCH_BASTIRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC      IRQ_EINT18
-#define IRQ_IDE0       IRQ_EINT16
-#define IRQ_IDE1       IRQ_EINT17
-#define IRQ_PCSERIAL1  IRQ_EINT15
-#define IRQ_PCSERIAL2  IRQ_EINT14
-#define IRQ_PCPARALLEL IRQ_EINT13
-#define IRQ_ASIX       IRQ_EINT11
-#define IRQ_DM9000     IRQ_EINT10
-#define IRQ_ISA        IRQ_EINT9
-#define IRQ_SMALERT    IRQ_EINT8
-
-#endif /* __ASM_ARCH_BASTIRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/bast-map.h b/arch/arm/mach-s3c24xx/include/mach/bast-map.h
deleted file mode 100644
index eecea2a50f8f..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/bast-map.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/bast-map.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * Machine BAST - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_BASTMAP_H
-#define __ASM_ARCH_BASTMAP_H
-
-#define BAST_IOADDR(x)     (S3C2410_ADDR((x) + 0x01300000))
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define BAST_VA_CTRL1       BAST_IOADDR(0x00000000)      /* 0x01300000 */
-#define BAST_PA_CTRL1       (S3C2410_CS5 | 0x7800000)
-
-#define BAST_VA_CTRL2       BAST_IOADDR(0x00100000)      /* 0x01400000 */
-#define BAST_PA_CTRL2       (S3C2410_CS1 | 0x6000000)
-
-#define BAST_VA_CTRL3       BAST_IOADDR(0x00200000)      /* 0x01500000 */
-#define BAST_PA_CTRL3       (S3C2410_CS1 | 0x6800000)
-
-#define BAST_VA_CTRL4       BAST_IOADDR(0x00300000)      /* 0x01600000 */
-#define BAST_PA_CTRL4       (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define BAST_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define BAST_VA_PC104_IRQREQ  BAST_IOADDR(0x00400000)
-
-#define BAST_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define BAST_VA_PC104_IRQRAW  BAST_IOADDR(0x00500000)
-
-#define BAST_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define BAST_VA_PC104_IRQMASK BAST_IOADDR(0x00600000)
-
-#define BAST_PA_LCD_RCMD1     (0x8800000)
-#define BAST_VA_LCD_RCMD1     BAST_IOADDR(0x00700000)
-
-#define BAST_PA_LCD_WCMD1     (0x8000000)
-#define BAST_VA_LCD_WCMD1     BAST_IOADDR(0x00800000)
-
-#define BAST_PA_LCD_RDATA1    (0x9800000)
-#define BAST_VA_LCD_RDATA1    BAST_IOADDR(0x00900000)
-
-#define BAST_PA_LCD_WDATA1    (0x9000000)
-#define BAST_VA_LCD_WDATA1    BAST_IOADDR(0x00A00000)
-
-#define BAST_PA_LCD_RCMD2     (0xA800000)
-#define BAST_VA_LCD_RCMD2     BAST_IOADDR(0x00B00000)
-
-#define BAST_PA_LCD_WCMD2     (0xA000000)
-#define BAST_VA_LCD_WCMD2     BAST_IOADDR(0x00C00000)
-
-#define BAST_PA_LCD_RDATA2    (0xB800000)
-#define BAST_VA_LCD_RDATA2    BAST_IOADDR(0x00D00000)
-
-#define BAST_PA_LCD_WDATA2    (0xB000000)
-#define BAST_VA_LCD_WDATA2    BAST_IOADDR(0x00E00000)
-
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x00000000 to 0x01000000 16MB ISA IO space
- * 0x01000000 to 0x02000000 16MB ISA memory space
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02400000 to 0x02500000 1MB  ASIX ethernet controller
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controller
- * 0x02600000 to 0x02700000 1MB  PC SuperIO controller
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VA_ISAIO      (BAST_VA_MULTISPACE + 0x00000000)
-#define BAST_VA_ISAMEM     (BAST_VA_MULTISPACE + 0x01000000)
-#define BAST_VA_IDEPRI     (BAST_VA_MULTISPACE + 0x02000000)
-#define BAST_VA_IDEPRIAUX  (BAST_VA_MULTISPACE + 0x02100000)
-#define BAST_VA_IDESEC     (BAST_VA_MULTISPACE + 0x02200000)
-#define BAST_VA_IDESECAUX  (BAST_VA_MULTISPACE + 0x02300000)
-#define BAST_VA_ASIXNET    (BAST_VA_MULTISPACE + 0x02400000)
-#define BAST_VA_DM9000     (BAST_VA_MULTISPACE + 0x02500000)
-#define BAST_VA_SUPERIO    (BAST_VA_MULTISPACE + 0x02600000)
-
-#define BAST_VA_MULTISPACE (0xE0000000)
-
-#define BAST_VAM_CS2 (0x00000000)
-#define BAST_VAM_CS3 (0x04000000)
-#define BAST_VAM_CS4 (0x08000000)
-#define BAST_VAM_CS5 (0x0C000000)
-
-/* physical offset addresses for the peripherals */
-
-#define BAST_PA_ISAIO     (0x00000000)
-#define BAST_PA_ASIXNET   (0x01000000)
-#define BAST_PA_SUPERIO   (0x01800000)
-#define BAST_PA_IDEPRI    (0x02000000)
-#define BAST_PA_IDEPRIAUX (0x02800000)
-#define BAST_PA_IDESEC    (0x03000000)
-#define BAST_PA_IDESECAUX (0x03800000)
-#define BAST_PA_ISAMEM    (0x04000000)
-#define BAST_PA_DM9000    (0x05000000)
-
-/* some configurations for the peripherals */
-
-#define BAST_PCSIO (BAST_VA_SUPERIO + BAST_VAM_CS2)
-/*  */
-
-#define BAST_ASIXNET_CS  BAST_VAM_CS5
-#define BAST_IDE_CS      BAST_VAM_CS5
-#define BAST_DM9000_CS   BAST_VAM_CS4
-
-#endif /* __ASM_ARCH_BASTMAP_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h b/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
deleted file mode 100644
index c53ad34c6579..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-fns.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h b/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
deleted file mode 100644
index 3890a05948fb..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-nrs.h
+++ /dev/null
@@ -1,97 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio-nrs.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410 - GPIO bank numbering
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __MACH_GPIONRS_H
-#define __MACH_GPIONRS_H
-
-#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
-
-#define S3C2410_GPIO_BANKG   (32*6)
-#define S3C2410_GPIO_BANKH   (32*7)
-
-/* GPIO sizes for various SoCs:
- *
- *             2442
- *   2410 2412 2440 2443 2416
- *   ---- ---- ---- ---- ----
- * A 23   22   25   16   25
- * B 11   11   11   11   9
- * C 16   15   16   16   16
- * D 16   16   16   16   16
- * E 16   16   16   16   16
- * F 8    8    8    8    8
- * G 16   16   16   16   8
- * H 11   11   9    15   15
- * J --   --   13   16   --
- * K --   --   --   --   16
- * L --   --   --   15   7
- * M --   --   --   2    2
- */
-
-/* GPIO bank sizes */
-#define S3C2410_GPIO_A_NR       (32)
-#define S3C2410_GPIO_B_NR       (32)
-#define S3C2410_GPIO_C_NR       (32)
-#define S3C2410_GPIO_D_NR       (32)
-#define S3C2410_GPIO_E_NR       (32)
-#define S3C2410_GPIO_F_NR       (32)
-#define S3C2410_GPIO_G_NR       (32)
-#define S3C2410_GPIO_H_NR       (32)
-#define S3C2410_GPIO_J_NR       (32)    /* technically 16. */
-#define S3C2410_GPIO_K_NR       (32)    /* technically 16. */
-#define S3C2410_GPIO_L_NR       (32)    /* technically 15. */
-#define S3C2410_GPIO_M_NR       (32)    /* technically 2. */
-
-#if CONFIG_S3C_GPIO_SPACE != 0
-#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
-#endif
-
-#define S3C2410_GPIO_NEXT(__gpio) \
-        ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
-
-#ifndef __ASSEMBLY__
-
-enum s3c_gpio_number {
-        S3C2410_GPIO_A_START = 0,
-        S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
-        S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
-        S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
-        S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
-        S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
-        S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
-        S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
-        S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
-        S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
-        S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
-        S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
-};
-
-#endif /* __ASSEMBLY__ */
-
-/* S3C2410 GPIO number definitions. */
-
-#define S3C2410_GPA(_nr)        (S3C2410_GPIO_A_START + (_nr))
-#define S3C2410_GPB(_nr)        (S3C2410_GPIO_B_START + (_nr))
-#define S3C2410_GPC(_nr)        (S3C2410_GPIO_C_START + (_nr))
-#define S3C2410_GPD(_nr)        (S3C2410_GPIO_D_START + (_nr))
-#define S3C2410_GPE(_nr)        (S3C2410_GPIO_E_START + (_nr))
-#define S3C2410_GPF(_nr)        (S3C2410_GPIO_F_START + (_nr))
-#define S3C2410_GPG(_nr)        (S3C2410_GPIO_G_START + (_nr))
-#define S3C2410_GPH(_nr)        (S3C2410_GPIO_H_START + (_nr))
-#define S3C2410_GPJ(_nr)        (S3C2410_GPIO_J_START + (_nr))
-#define S3C2410_GPK(_nr)        (S3C2410_GPIO_K_START + (_nr))
-#define S3C2410_GPL(_nr)        (S3C2410_GPIO_L_START + (_nr))
-#define S3C2410_GPM(_nr)        (S3C2410_GPIO_M_START + (_nr))
-
-#endif /* __MACH_GPIONRS_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h b/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
deleted file mode 100644
index c410a078622c..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/gpio-track.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/* arch/arm/mach-s3c24100/include/mach/gpio-core.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C2410 - GPIO core support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_CORE_H
-#define __ASM_ARCH_GPIO_CORE_H __FILE__
-
-#include <mach/regs-gpio.h>
-
-extern struct samsung_gpio_chip s3c24xx_gpios[];
-
-static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
-{
-        struct samsung_gpio_chip *chip;
-
-        if (pin > S3C_GPIO_END)
-                return NULL;
-
-        chip = &s3c24xx_gpios[pin/32];
-        return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
-}
-
-#endif /* __ASM_ARCH_GPIO_CORE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/gpio.h b/arch/arm/mach-s3c24xx/include/mach/gpio.h
index 6fac70f3484e..14591563ca70 100644
--- a/arch/arm/mach-s3c24xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/gpio.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/gpio.h
- *
+/*
  * Copyright (c) 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -15,6 +14,9 @@
  * devices that need GPIO.
  */
 
+#ifndef __MACH_GPIO_H
+#define __MACH_GPIO_H __FILE__
+
 #ifdef CONFIG_CPU_S3C244X
 #define ARCH_NR_GPIOS   (32 * 9 + CONFIG_S3C24XX_GPIO_EXTRA)
 #elif defined(CONFIG_CPU_S3C2443) || defined(CONFIG_CPU_S3C2416)
@@ -23,8 +25,83 @@
 #define ARCH_NR_GPIOS   (256 + CONFIG_S3C24XX_GPIO_EXTRA)
 #endif
 
-#include <mach/gpio-nrs.h>
-#include <mach/gpio-fns.h>
+/*
+ * GPIO sizes for various SoCs:
+ *
+ *   2410 2412 2440 2443 2416
+ *             2442
+ *   ---- ---- ---- ---- ----
+ * A  23   22   25   16   25
+ * B  11   11   11   11   9
+ * C  16   15   16   16   16
+ * D  16   16   16   16   16
+ * E  16   16   16   16   16
+ * F  8    8    8    8    8
+ * G  16   16   16   16   8
+ * H  11   11   9    15   15
+ * J  --   --   13   16   --
+ * K  --   --   --   --   16
+ * L  --   --   --   15   7
+ * M  --   --   --   2    2
+ */
+
+/* GPIO bank sizes */
+
+#define S3C2410_GPIO_A_NR       (32)
+#define S3C2410_GPIO_B_NR       (32)
+#define S3C2410_GPIO_C_NR       (32)
+#define S3C2410_GPIO_D_NR       (32)
+#define S3C2410_GPIO_E_NR       (32)
+#define S3C2410_GPIO_F_NR       (32)
+#define S3C2410_GPIO_G_NR       (32)
+#define S3C2410_GPIO_H_NR       (32)
+#define S3C2410_GPIO_J_NR       (32)    /* technically 16. */
+#define S3C2410_GPIO_K_NR       (32)    /* technically 16. */
+#define S3C2410_GPIO_L_NR       (32)    /* technically 15. */
+#define S3C2410_GPIO_M_NR       (32)    /* technically 2. */
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be nonzero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+        ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+        S3C2410_GPIO_A_START = 0,
+        S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+        S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+        S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+        S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+        S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+        S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+        S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+        S3C2410_GPIO_J_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_H),
+        S3C2410_GPIO_K_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_J),
+        S3C2410_GPIO_L_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_K),
+        S3C2410_GPIO_M_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_L),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr)        (S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr)        (S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr)        (S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr)        (S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr)        (S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr)        (S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr)        (S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr)        (S3C2410_GPIO_H_START + (_nr))
+#define S3C2410_GPJ(_nr)        (S3C2410_GPIO_J_START + (_nr))
+#define S3C2410_GPK(_nr)        (S3C2410_GPIO_K_START + (_nr))
+#define S3C2410_GPL(_nr)        (S3C2410_GPIO_L_START + (_nr))
+#define S3C2410_GPM(_nr)        (S3C2410_GPIO_M_START + (_nr))
+
+#include <plat/gpio-cfg.h>
 
 #ifdef CONFIG_CPU_S3C244X
 #define S3C_GPIO_END    (S3C2410_GPJ(0) + 32)
@@ -33,3 +110,5 @@
 #else
 #define S3C_GPIO_END    (S3C2410_GPH(0) + 32)
 #endif
+
+#endif /* __MACH_GPIO_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/h1940.h b/arch/arm/mach-s3c24xx/include/mach/h1940.h
deleted file mode 100644
index 2aa683c8d3d6..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/h1940.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/h1940.h
- *
- * Copyright 2006 Ben Dooks <ben-linux@fluff.org>
- *
- * H1940 definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_H1940_H
-#define __ASM_ARCH_H1940_H
-
-#define H1940_SUSPEND_CHECKSUM          (0x30003ff8)
-#define H1940_SUSPEND_RESUMEAT          (0x30081000)
-#define H1940_SUSPEND_CHECK             (0x30080000)
-
-extern void h1940_pm_return(void);
-extern int h1940_led_blink_set(unsigned gpio, int state,
-        unsigned long *delay_on, unsigned long *delay_off);
-
-
-#endif /* __ASM_ARCH_H1940_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/hardware.h b/arch/arm/mach-s3c24xx/include/mach/hardware.h
index aef5631eac58..a6cc14a092fc 100644
--- a/arch/arm/mach-s3c24xx/include/mach/hardware.h
+++ b/arch/arm/mach-s3c24xx/include/mach/hardware.h
@@ -23,12 +23,6 @@ extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
 
 #endif /* CONFIG_CPU_S3C2440 */
 
-#ifdef CONFIG_CPU_S3C2412
-
-extern int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state);
-
-#endif /* CONFIG_CPU_S3C2412 */
-
 #endif /* __ASSEMBLY__ */
 
 #include <asm/sizes.h>
diff --git a/arch/arm/mach-s3c24xx/include/mach/idle.h b/arch/arm/mach-s3c24xx/include/mach/idle.h
deleted file mode 100644
index e9ddd706b16e..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/idle.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/idle.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *              http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 CPU Idle controls
-*/
-
-#ifndef __ASM_ARCH_IDLE_H
-#define __ASM_ARCH_IDLE_H __FILE__
-
-/* This allows the over-ride of the default idle code, in case there
- * is any other things to be done over idle (like DVS)
-*/
-
-extern void (*s3c24xx_idle)(void);
-
-extern void s3c24xx_default_idle(void);
-
-#endif /* __ASM_ARCH_IDLE_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h b/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
deleted file mode 100644
index e9e36b0abbac..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-cpld.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-cpld.h
- *
- * Copyright 2005 Simtec Electronics
- *      http://www.simtec.co.uk/products/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * OSIRIS - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_OSIRISCPLD_H
-#define __ASM_ARCH_OSIRISCPLD_H
-
-/* CTRL0 - NAND WP control */
-
-#define OSIRIS_CTRL0_NANDSEL            (0x3)
-#define OSIRIS_CTRL0_BOOT_INT           (1<<3)
-#define OSIRIS_CTRL0_PCMCIA             (1<<4)
-#define OSIRIS_CTRL0_FIX8               (1<<5)
-#define OSIRIS_CTRL0_PCMCIA_nWAIT       (1<<6)
-#define OSIRIS_CTRL0_PCMCIA_nIOIS16     (1<<7)
-
-#define OSIRIS_CTRL1_FIX8               (1<<0)
-
-#define OSIRIS_ID_REVMASK               (0x7)
-
-#endif /* __ASM_ARCH_OSIRISCPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index a11a638bd599..c2ef016032ab 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -14,8 +14,6 @@
 #ifndef __ASM_ARCH_REGS_GPIO_H
 #define __ASM_ARCH_REGS_GPIO_H
 
-#include <mach/gpio-nrs.h>
-
 #define S3C24XX_MISCCR          S3C24XX_GPIOREG2(0x80)
 
 /* general configuration options */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
deleted file mode 100644
index e0c67b0163d8..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-mem.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-mem.h
- *
- * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
- *              http://www.simtec.co.uk/products/SWLINUX/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2410 Memory Control register definitions
-*/
-
-#ifndef __ASM_ARM_MEMREGS_H
-#define __ASM_ARM_MEMREGS_H
-
-#ifndef S3C2410_MEMREG
-#define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-/* bus width, and wait state control */
-#define S3C2410_BWSCON                  S3C2410_MEMREG(0x0000)
-
-/* bank zero config - note, pinstrapped from OM pins! */
-#define S3C2410_BWSCON_DW0_16           (1<<1)
-#define S3C2410_BWSCON_DW0_32           (2<<1)
-
-/* bank one configs */
-#define S3C2410_BWSCON_DW1_8            (0<<4)
-#define S3C2410_BWSCON_DW1_16           (1<<4)
-#define S3C2410_BWSCON_DW1_32           (2<<4)
-#define S3C2410_BWSCON_WS1              (1<<6)
-#define S3C2410_BWSCON_ST1              (1<<7)
-
-/* bank 2 configurations */
-#define S3C2410_BWSCON_DW2_8            (0<<8)
-#define S3C2410_BWSCON_DW2_16           (1<<8)
-#define S3C2410_BWSCON_DW2_32           (2<<8)
-#define S3C2410_BWSCON_WS2              (1<<10)
-#define S3C2410_BWSCON_ST2              (1<<11)
-
-/* bank 3 configurations */
-#define S3C2410_BWSCON_DW3_8            (0<<12)
-#define S3C2410_BWSCON_DW3_16           (1<<12)
-#define S3C2410_BWSCON_DW3_32           (2<<12)
-#define S3C2410_BWSCON_WS3              (1<<14)
-#define S3C2410_BWSCON_ST3              (1<<15)
-
-/* bank 4 configurations */
-#define S3C2410_BWSCON_DW4_8            (0<<16)
-#define S3C2410_BWSCON_DW4_16           (1<<16)
-#define S3C2410_BWSCON_DW4_32           (2<<16)
-#define S3C2410_BWSCON_WS4              (1<<18)
-#define S3C2410_BWSCON_ST4              (1<<19)
-
-/* bank 5 configurations */
-#define S3C2410_BWSCON_DW5_8            (0<<20)
-#define S3C2410_BWSCON_DW5_16           (1<<20)
-#define S3C2410_BWSCON_DW5_32           (2<<20)
-#define S3C2410_BWSCON_WS5              (1<<22)
-#define S3C2410_BWSCON_ST5              (1<<23)
-
-/* bank 6 configurations */
-#define S3C2410_BWSCON_DW6_8            (0<<24)
-#define S3C2410_BWSCON_DW6_16           (1<<24)
-#define S3C2410_BWSCON_DW6_32           (2<<24)
-#define S3C2410_BWSCON_WS6              (1<<26)
-#define S3C2410_BWSCON_ST6              (1<<27)
-
-/* bank 7 configurations */
-#define S3C2410_BWSCON_DW7_8            (0<<28)
-#define S3C2410_BWSCON_DW7_16           (1<<28)
-#define S3C2410_BWSCON_DW7_32           (2<<28)
-#define S3C2410_BWSCON_WS7              (1<<30)
-#define S3C2410_BWSCON_ST7              (1<<31)
-
-/* accesor functions for getting BANK(n) configuration. (n != 0) */
-
-#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
-
-#define S3C2410_BWSCON_DW8              (0)
-#define S3C2410_BWSCON_DW16             (1)
-#define S3C2410_BWSCON_DW32             (2)
-#define S3C2410_BWSCON_WS               (1 << 2)
-#define S3C2410_BWSCON_ST               (1 << 3)
-
-/* memory set (rom, ram) */
-#define S3C2410_BANKCON0                S3C2410_MEMREG(0x0004)
-#define S3C2410_BANKCON1                S3C2410_MEMREG(0x0008)
-#define S3C2410_BANKCON2                S3C2410_MEMREG(0x000C)
-#define S3C2410_BANKCON3                S3C2410_MEMREG(0x0010)
-#define S3C2410_BANKCON4                S3C2410_MEMREG(0x0014)
-#define S3C2410_BANKCON5                S3C2410_MEMREG(0x0018)
-#define S3C2410_BANKCON6                S3C2410_MEMREG(0x001C)
-#define S3C2410_BANKCON7                S3C2410_MEMREG(0x0020)
-
-/* bank configuration registers */
-
-#define S3C2410_BANKCON_PMCnorm         (0x00)
-#define S3C2410_BANKCON_PMC4            (0x01)
-#define S3C2410_BANKCON_PMC8            (0x02)
-#define S3C2410_BANKCON_PMC16           (0x03)
-
-/* bank configurations for banks 0..7, note banks
- * 6 and 7 have different configurations depending on
- * the memory type bits */
-
-#define S3C2410_BANKCON_Tacp2           (0x0 << 2)
-#define S3C2410_BANKCON_Tacp3           (0x1 << 2)
-#define S3C2410_BANKCON_Tacp4           (0x2 << 2)
-#define S3C2410_BANKCON_Tacp6           (0x3 << 2)
-#define S3C2410_BANKCON_Tacp_SHIFT      (2)
-
-#define S3C2410_BANKCON_Tcah0           (0x0 << 4)
-#define S3C2410_BANKCON_Tcah1           (0x1 << 4)
-#define S3C2410_BANKCON_Tcah2           (0x2 << 4)
-#define S3C2410_BANKCON_Tcah4           (0x3 << 4)
-#define S3C2410_BANKCON_Tcah_SHIFT      (4)
-
-#define S3C2410_BANKCON_Tcoh0           (0x0 << 6)
-#define S3C2410_BANKCON_Tcoh1           (0x1 << 6)
-#define S3C2410_BANKCON_Tcoh2           (0x2 << 6)
-#define S3C2410_BANKCON_Tcoh4           (0x3 << 6)
-#define S3C2410_BANKCON_Tcoh_SHIFT      (6)
-
-#define S3C2410_BANKCON_Tacc1           (0x0 << 8)
-#define S3C2410_BANKCON_Tacc2           (0x1 << 8)
-#define S3C2410_BANKCON_Tacc3           (0x2 << 8)
-#define S3C2410_BANKCON_Tacc4           (0x3 << 8)
-#define S3C2410_BANKCON_Tacc6           (0x4 << 8)
-#define S3C2410_BANKCON_Tacc8           (0x5 << 8)
-#define S3C2410_BANKCON_Tacc10          (0x6 << 8)
-#define S3C2410_BANKCON_Tacc14          (0x7 << 8)
-#define S3C2410_BANKCON_Tacc_SHIFT      (8)
-
-#define S3C2410_BANKCON_Tcos0           (0x0 << 11)
-#define S3C2410_BANKCON_Tcos1           (0x1 << 11)
-#define S3C2410_BANKCON_Tcos2           (0x2 << 11)
-#define S3C2410_BANKCON_Tcos4           (0x3 << 11)
-#define S3C2410_BANKCON_Tcos_SHIFT      (11)
-
-#define S3C2410_BANKCON_Tacs0           (0x0 << 13)
-#define S3C2410_BANKCON_Tacs1           (0x1 << 13)
-#define S3C2410_BANKCON_Tacs2           (0x2 << 13)
-#define S3C2410_BANKCON_Tacs4           (0x3 << 13)
-#define S3C2410_BANKCON_Tacs_SHIFT      (13)
-
-#define S3C2410_BANKCON_SRAM            (0x0 << 15)
-#define S3C2410_BANKCON_SDRAM           (0x3 << 15)
-
-/* next bits only for SDRAM in 6,7 */
-#define S3C2410_BANKCON_Trcd2           (0x00 << 2)
-#define S3C2410_BANKCON_Trcd3           (0x01 << 2)
-#define S3C2410_BANKCON_Trcd4           (0x02 << 2)
-
-/* control column address select */
-#define S3C2410_BANKCON_SCANb8          (0x00 << 0)
-#define S3C2410_BANKCON_SCANb9          (0x01 << 0)
-#define S3C2410_BANKCON_SCANb10         (0x02 << 0)
-
-#define S3C2410_REFRESH                 S3C2410_MEMREG(0x0024)
-#define S3C2410_BANKSIZE                S3C2410_MEMREG(0x0028)
-#define S3C2410_MRSRB6                  S3C2410_MEMREG(0x002C)
-#define S3C2410_MRSRB7                  S3C2410_MEMREG(0x0030)
-
-/* refresh control */
-
-#define S3C2410_REFRESH_REFEN           (1<<23)
-#define S3C2410_REFRESH_SELF            (1<<22)
-#define S3C2410_REFRESH_REFCOUNTER      ((1<<11)-1)
-
-#define S3C2410_REFRESH_TRP_MASK        (3<<20)
-#define S3C2410_REFRESH_TRP_2clk        (0<<20)
-#define S3C2410_REFRESH_TRP_3clk        (1<<20)
-#define S3C2410_REFRESH_TRP_4clk        (2<<20)
-
-#define S3C2410_REFRESH_TSRC_MASK       (3<<18)
-#define S3C2410_REFRESH_TSRC_4clk       (0<<18)
-#define S3C2410_REFRESH_TSRC_5clk       (1<<18)
-#define S3C2410_REFRESH_TSRC_6clk       (2<<18)
-#define S3C2410_REFRESH_TSRC_7clk       (3<<18)
-
-
-/* mode select register(s) */
-
-#define  S3C2410_MRSRB_CL1              (0x00 << 4)
-#define  S3C2410_MRSRB_CL2              (0x02 << 4)
-#define  S3C2410_MRSRB_CL3              (0x03 << 4)
-
-/* bank size register */
-#define S3C2410_BANKSIZE_128M           (0x2 << 0)
-#define S3C2410_BANKSIZE_64M            (0x1 << 0)
-#define S3C2410_BANKSIZE_32M            (0x0 << 0)
-#define S3C2410_BANKSIZE_16M            (0x7 << 0)
-#define S3C2410_BANKSIZE_8M             (0x6 << 0)
-#define S3C2410_BANKSIZE_4M             (0x5 << 0)
-#define S3C2410_BANKSIZE_2M             (0x4 << 0)
-#define S3C2410_BANKSIZE_MASK           (0x7 << 0)
-#define S3C2410_BANKSIZE_SCLK_EN        (1<<4)
-#define S3C2410_BANKSIZE_SCKE_EN        (1<<5)
-#define S3C2410_BANKSIZE_BURST          (1<<7)
-
-#endif /* __ASM_ARM_MEMREGS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-power.h b/arch/arm/mach-s3c24xx/include/mach/regs-power.h
deleted file mode 100644
index 4932b87bdf3d..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-power.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-power.h
- *
- * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX power control register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_PWR
-#define __ASM_ARM_REGS_PWR __FILE__
-
-#define S3C24XX_PWRREG(x) ((x) + S3C24XX_VA_CLKPWR)
-
-#define S3C2412_PWRMODECON      S3C24XX_PWRREG(0x20)
-#define S3C2412_PWRCFG          S3C24XX_PWRREG(0x24)
-
-#define S3C2412_INFORM0         S3C24XX_PWRREG(0x70)
-#define S3C2412_INFORM1         S3C24XX_PWRREG(0x74)
-#define S3C2412_INFORM2         S3C24XX_PWRREG(0x78)
-#define S3C2412_INFORM3         S3C24XX_PWRREG(0x7C)
-
-#define S3C2412_PWRCFG_BATF_IRQ                 (1<<0)
-#define S3C2412_PWRCFG_BATF_IGNORE              (2<<0)
-#define S3C2412_PWRCFG_BATF_SLEEP               (3<<0)
-#define S3C2412_PWRCFG_BATF_MASK                (3<<0)
-
-#define S3C2412_PWRCFG_STANDBYWFI_IGNORE        (0<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_IDLE          (1<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_STOP          (2<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_SLEEP         (3<<6)
-#define S3C2412_PWRCFG_STANDBYWFI_MASK          (3<<6)
-
-#define S3C2412_PWRCFG_RTC_MASKIRQ              (1<<8)
-#define S3C2412_PWRCFG_NAND_NORST               (1<<9)
-
-#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
deleted file mode 100644
index fb6352515090..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412-mem.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412-mem.h
- *
- * Copyright (c) 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2412_MEM
-#define __ASM_ARM_REGS_S3C2412_MEM
-
-#define S3C2412_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#define S3C2412_EBIREG(x) (S3C2412_VA_EBI + (x))
-
-#define S3C2412_SSMCREG(x) (S3C2412_VA_SSMC + (x))
-#define S3C2412_SSMC(x, o) (S3C2412_SSMCREG((x * 0x20) + (o)))
-
-#define S3C2412_BANKCFG                 S3C2412_MEMREG(0x00)
-#define S3C2412_BANKCON1                S3C2412_MEMREG(0x04)
-#define S3C2412_BANKCON2                S3C2412_MEMREG(0x08)
-#define S3C2412_BANKCON3                S3C2412_MEMREG(0x0C)
-
-#define S3C2412_REFRESH                 S3C2412_MEMREG(0x10)
-#define S3C2412_TIMEOUT                 S3C2412_MEMREG(0x14)
-
-/* EBI control registers */
-
-#define S3C2412_EBI_PR                  S3C2412_EBIREG(0x00)
-#define S3C2412_EBI_BANKCFG             S3C2412_EBIREG(0x04)
-
-/* SSMC control registers */
-
-#define S3C2412_SSMC_BANK(x)            S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMIDCYR(x)              S3C2412_SSMC(x, 0x00)
-#define S3C2412_SMBWSTRD(x)             S3C2412_SSMC(x, 0x04)
-#define S3C2412_SMBWSTWRR(x)            S3C2412_SSMC(x, 0x08)
-#define S3C2412_SMBWSTOENR(x)           S3C2412_SSMC(x, 0x0C)
-#define S3C2412_SMBWSTWENR(x)           S3C2412_SSMC(x, 0x10)
-#define S3C2412_SMBCR(x)                S3C2412_SSMC(x, 0x14)
-#define S3C2412_SMBSR(x)                S3C2412_SSMC(x, 0x18)
-#define S3C2412_SMBWSTBRDR(x)           S3C2412_SSMC(x, 0x1C)
-
-#endif /*  __ASM_ARM_REGS_S3C2412_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
deleted file mode 100644
index aa69dc79bc38..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2412.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2412.h
- *
- * Copyright 2007 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2412 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2412_H
-#define __ASM_ARCH_REGS_S3C2412_H "s3c2412"
-
-#define S3C2412_SWRST           (S3C24XX_VA_CLKPWR + 0x30)
-#define S3C2412_SWRST_RESET     (0x533C2412)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif  /* __ASM_ARCH_REGS_S3C2412_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
deleted file mode 100644
index 2f31b74974af..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416-mem.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416-mem.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *      as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *      Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 memory register definitions
-*/
-
-#ifndef __ASM_ARM_REGS_S3C2416_MEM
-#define __ASM_ARM_REGS_S3C2416_MEM
-
-#ifndef S3C2416_MEMREG
-#define S3C2416_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x))
-#endif
-
-#define S3C2416_BANKCFG                 S3C2416_MEMREG(0x00)
-#define S3C2416_BANKCON1                S3C2416_MEMREG(0x04)
-#define S3C2416_BANKCON2                S3C2416_MEMREG(0x08)
-#define S3C2416_BANKCON3                S3C2416_MEMREG(0x0C)
-
-#define S3C2416_REFRESH                 S3C2416_MEMREG(0x10)
-#define S3C2416_TIMEOUT                 S3C2416_MEMREG(0x14)
-
-#endif /*  __ASM_ARM_REGS_S3C2416_MEM */
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
deleted file mode 100644
index e443167efb87..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2416.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/regs-s3c2416.h
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *      as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *      Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C2416 specific register definitions
-*/
-
-#ifndef __ASM_ARCH_REGS_S3C2416_H
-#define __ASM_ARCH_REGS_S3C2416_H "s3c2416"
-
-#define S3C2416_SWRST           (S3C24XX_VA_CLKPWR + 0x44)
-#define S3C2416_SWRST_RESET     (0x533C2416)
-
-/* see regs-power.h for the other registers in the power block. */
-
-#endif  /* __ASM_ARCH_REGS_S3C2416_H */
-
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
deleted file mode 100644
index e4119913d7c5..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-cpld.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
- *
- * Copyright (c) 2003 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * VR1000 - CPLD control constants
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000CPLD_H
-#define __ASM_ARCH_VR1000CPLD_H
-
-#define VR1000_CPLD_CTRL2_RAMWEN     (0x04)   /* SRAM Write Enable */
-
-#endif /* __ASM_ARCH_VR1000CPLD_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
deleted file mode 100644
index 47add133b8ee..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-irq.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - IRQ Number definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_VR1000IRQ_H
-#define __ASM_ARCH_VR1000IRQ_H
-
-/* irq numbers to onboard peripherals */
-
-#define IRQ_USBOC            IRQ_EINT19
-#define IRQ_IDE0             IRQ_EINT16
-#define IRQ_IDE1             IRQ_EINT17
-#define IRQ_VR1000_SERIAL    IRQ_EINT12
-#define IRQ_VR1000_DM9000A   IRQ_EINT10
-#define IRQ_VR1000_DM9000N   IRQ_EINT9
-#define IRQ_SMALERT          IRQ_EINT8
-
-#endif /* __ASM_ARCH_VR1000IRQ_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h b/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
deleted file mode 100644
index 28376e56dd3b..000000000000
--- a/arch/arm/mach-s3c24xx/include/mach/vr1000-map.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/vr1000-map.h
- *
- * Copyright (c) 2003-2005 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * Machine VR1000 - Memory map definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x13000000, now we need to find space for the
- * peripherals that live in the nGCS[x] areas, which are quite numerous
- * in their space. We also have the board's CPLD to find register space
- * for.
- */
-
-#ifndef __ASM_ARCH_VR1000MAP_H
-#define __ASM_ARCH_VR1000MAP_H
-
-#include <mach/bast-map.h>
-
-#define VR1000_IOADDR(x) BAST_IOADDR(x)
-
-/* we put the CPLD registers next, to get them out of the way */
-
-#define VR1000_VA_CTRL1     VR1000_IOADDR(0x00000000)    /* 0x01300000 */
-#define VR1000_PA_CTRL1     (S3C2410_CS5 | 0x7800000)
-
-#define VR1000_VA_CTRL2     VR1000_IOADDR(0x00100000)    /* 0x01400000 */
-#define VR1000_PA_CTRL2     (S3C2410_CS1 | 0x6000000)
-
-#define VR1000_VA_CTRL3     VR1000_IOADDR(0x00200000)    /* 0x01500000 */
-#define VR1000_PA_CTRL3     (S3C2410_CS1 | 0x6800000)
-
-#define VR1000_VA_CTRL4     VR1000_IOADDR(0x00300000)    /* 0x01600000 */
-#define VR1000_PA_CTRL4     (S3C2410_CS1 | 0x7000000)
-
-/* next, we have the PC104 ISA interrupt registers */
-
-#define VR1000_PA_PC104_IRQREQ  (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
-#define VR1000_VA_PC104_IRQREQ  VR1000_IOADDR(0x00400000)
-
-#define VR1000_PA_PC104_IRQRAW  (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
-#define VR1000_VA_PC104_IRQRAW  VR1000_IOADDR(0x00500000)
-
-#define VR1000_PA_PC104_IRQMASK (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
-#define VR1000_VA_PC104_IRQMASK VR1000_IOADDR(0x00600000)
-
-/* 0xE0000000 contains the IO space that is split by speed and
- * whether the access is for 8 or 16bit IO... this ensures that
- * the correct access is made
- *
- * 0x10000000 of space, partitioned as so:
- *
- * 0x00000000 to 0x04000000  8bit,  slow
- * 0x04000000 to 0x08000000  16bit, slow
- * 0x08000000 to 0x0C000000  16bit, net
- * 0x0C000000 to 0x10000000  16bit, fast
- *
- * each of these spaces has the following in:
- *
- * 0x02000000 to 0x02100000 1MB  IDE primary channel
- * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
- * 0x02200000 to 0x02400000 1MB  IDE secondary channel
- * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
- * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
- * 0x02600000 to 0x02700000 1MB
- *
- * the phyiscal layout of the zones are:
- *  nGCS2 - 8bit, slow
- *  nGCS3 - 16bit, slow
- *  nGCS4 - 16bit, net
- *  nGCS5 - 16bit, fast
- */
-
-#define VR1000_VA_MULTISPACE (0xE0000000)
-
-#define VR1000_VA_ISAIO            (VR1000_VA_MULTISPACE + 0x00000000)
-#define VR1000_VA_ISAMEM           (VR1000_VA_MULTISPACE + 0x01000000)
-#define VR1000_VA_IDEPRI           (VR1000_VA_MULTISPACE + 0x02000000)
-#define VR1000_VA_IDEPRIAUX        (VR1000_VA_MULTISPACE + 0x02100000)
-#define VR1000_VA_IDESEC           (VR1000_VA_MULTISPACE + 0x02200000)
-#define VR1000_VA_IDESECAUX        (VR1000_VA_MULTISPACE + 0x02300000)
-#define VR1000_VA_ASIXNET          (VR1000_VA_MULTISPACE + 0x02400000)
-#define VR1000_VA_DM9000           (VR1000_VA_MULTISPACE + 0x02500000)
-#define VR1000_VA_SUPERIO          (VR1000_VA_MULTISPACE + 0x02600000)
-
-/* physical offset addresses for the peripherals */
-
-#define VR1000_PA_IDEPRI           (0x02000000)
-#define VR1000_PA_IDEPRIAUX        (0x02800000)
-#define VR1000_PA_IDESEC           (0x03000000)
-#define VR1000_PA_IDESECAUX        (0x03800000)
-#define VR1000_PA_DM9000           (0x05000000)
-
-#define VR1000_PA_SERIAL           (0x11800000)
-#define VR1000_VA_SERIAL           (VR1000_IOADDR(0x00700000))
-
-/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
-#define VR1000_PA_SRAM             (S3C2410_CS1 | 0x05000000)
-
-/* some configurations for the peripherals */
-
-#define VR1000_DM9000_CS         VR1000_VAM_CS4
-
-#endif /* __ASM_ARCH_VR1000MAP_H */
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
index b1908e56da1b..4cd13ab6496b 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2410.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
- *
+/*
  * Copyright (c) 2006-2009 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -20,11 +19,12 @@
 #include <linux/slab.h>
 
 #include <mach/map.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu-freq-core.h>
 
+#include "regs-mem.h"
+
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
 /**
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
index 48eee39ab369..663436d9db01 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/mach-s3c24xx/iotiming-s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -28,12 +27,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/regs-s3c2412-mem.h>
-
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 #include <plat/clock.h>
 
+#include "s3c2412.h"
+
 #define print_ns(x) ((x) / 10), ((x) % 10)
 
 /**
diff --git a/arch/arm/mach-s3c24xx/irq-pm.c b/arch/arm/mach-s3c24xx/irq-pm.c
index 0efb2e2848c8..e1199599873e 100644
--- a/arch/arm/mach-s3c24xx/irq-pm.c
+++ b/arch/arm/mach-s3c24xx/irq-pm.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
@@ -29,18 +30,18 @@
  * set bit to 1 in allow bitfield to enable the wakeup settings on it
 */
 
-unsigned long s3c_irqwake_intallow      = 1L << (IRQ_RTC - IRQ_EINT0) | 0xfL;
+unsigned long s3c_irqwake_intallow      = 1L << 30 | 0xfL;
 unsigned long s3c_irqwake_eintallow     = 0x0000fff0L;
 
 int s3c_irq_wake(struct irq_data *data, unsigned int state)
 {
-        unsigned long irqbit = 1 << (data->irq - IRQ_EINT0);
+        unsigned long irqbit = 1 << data->hwirq;
 
         if (!(s3c_irqwake_intallow & irqbit))
                 return -ENOENT;
 
-        printk(KERN_INFO "wake %s for irq %d\n",
-               state ? "enabled" : "disabled", data->irq);
+        pr_info("wake %s for hwirq %lu\n",
+                state ? "enabled" : "disabled", data->hwirq);
 
         if (!state)
                 s3c_irqwake_intmask |= irqbit;
@@ -64,7 +65,7 @@ static unsigned long save_extint[3];
 static unsigned long save_eintflt[4];
 static unsigned long save_eintmask;
 
-int s3c24xx_irq_suspend(void)
+static int s3c24xx_irq_suspend(void)
 {
         unsigned int i;
 
@@ -80,7 +81,7 @@ int s3c24xx_irq_suspend(void)
         return 0;
 }
 
-void s3c24xx_irq_resume(void)
+static void s3c24xx_irq_resume(void)
 {
         unsigned int i;
 
@@ -93,3 +94,31 @@ void s3c24xx_irq_resume(void)
         s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
         __raw_writel(save_eintmask, S3C24XX_EINTMASK);
 }
+
+struct syscore_ops s3c24xx_irq_syscore_ops = {
+        .suspend        = s3c24xx_irq_suspend,
+        .resume         = s3c24xx_irq_resume,
+};
+
+#ifdef CONFIG_CPU_S3C2416
+static struct sleep_save s3c2416_irq_save[] = {
+        SAVE_ITEM(S3C2416_INTMSK2),
+};
+
+static int s3c2416_irq_suspend(void)
+{
+        s3c_pm_do_save(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+
+        return 0;
+}
+
+static void s3c2416_irq_resume(void)
+{
+        s3c_pm_do_restore(s3c2416_irq_save, ARRAY_SIZE(s3c2416_irq_save));
+}
+
+struct syscore_ops s3c2416_irq_syscore_ops = {
+        .suspend        = s3c2416_irq_suspend,
+        .resume         = s3c2416_irq_resume,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2412.c b/arch/arm/mach-s3c24xx/irq-s3c2412.c
index e65619ddbccc..67d763178d3f 100644
--- a/arch/arm/mach-s3c24xx/irq-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/irq-s3c2412.c
@@ -33,12 +33,13 @@
 
 #include <mach/regs-irq.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/irq.h>
 #include <plat/pm.h>
 
+#include "s3c2412-power.h"
+
 #define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
 #define INTMSK_SUB(start, end) (INTMSK(start, end) << ((start - S3C2410_IRQSUB(0))))
 
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c
deleted file mode 100644
index ff141b0af26b..000000000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2416.c
+++ /dev/null
@@ -1,348 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/irq.c
- *
- * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com>,
- *      as part of OpenInkpot project
- * Copyright (c) 2009 Promwad Innovation Company
- *      Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-#include <linux/syscore_ops.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2416_irq_demux(unsigned int irq, unsigned int len)
-{
-        unsigned int subsrc, submsk;
-        unsigned int end;
-
-        /* read the current pending interrupts, and the mask
-         * for what it is available */
-
-        subsrc = __raw_readl(S3C2410_SUBSRCPND);
-        submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-        subsrc  &= ~submsk;
-        subsrc >>= (irq - S3C2410_IRQSUB(0));
-        subsrc  &= (1 << len)-1;
-
-        end = len + irq;
-
-        for (; irq < end && subsrc; irq++) {
-                if (subsrc & 1)
-                        generic_handle_irq(irq);
-
-                subsrc >>= 1;
-        }
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2416_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2416_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97  (1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97  INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2416_irq_wdtac97_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2416_irq_wdtac97_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2416_irq_wdtac97 = {
-        .irq_mask       = s3c2416_irq_wdtac97_mask,
-        .irq_unmask     = s3c2416_irq_wdtac97_unmask,
-        .irq_ack        = s3c2416_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2416_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2416_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD      (1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD      INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2416_irq_lcd_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2416_irq_lcd_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2416_irq_lcd = {
-        .irq_mask       = s3c2416_irq_lcd_mask,
-        .irq_unmask     = s3c2416_irq_lcd_unmask,
-        .irq_ack        = s3c2416_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2416_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2416_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA      (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA      INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-
-static void s3c2416_irq_dma_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2416_irq_dma_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2416_irq_dma_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2416_irq_dma = {
-        .irq_mask       = s3c2416_irq_dma_mask,
-        .irq_unmask     = s3c2416_irq_dma_unmask,
-        .irq_ack        = s3c2416_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2416_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2416_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3    (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3    (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2416_irq_uart3_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2416_irq_uart3_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2416_irq_uart3 = {
-        .irq_mask       = s3c2416_irq_uart3_mask,
-        .irq_unmask     = s3c2416_irq_uart3_unmask,
-        .irq_ack        = s3c2416_irq_uart3_ack,
-};
-
-/* second interrupt register */
-
-static inline void s3c2416_irq_ack_second(struct irq_data *data)
-{
-        unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-
-        __raw_writel(bitval, S3C2416_SRCPND2);
-        __raw_writel(bitval, S3C2416_INTPND2);
-}
-
-static void s3c2416_irq_mask_second(struct irq_data *data)
-{
-        unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-        unsigned long mask;
-
-        mask = __raw_readl(S3C2416_INTMSK2);
-        mask |= bitval;
-        __raw_writel(mask, S3C2416_INTMSK2);
-}
-
-static void s3c2416_irq_unmask_second(struct irq_data *data)
-{
-        unsigned long bitval = 1UL << (data->irq - IRQ_S3C2416_2D);
-        unsigned long mask;
-
-        mask = __raw_readl(S3C2416_INTMSK2);
-        mask &= ~bitval;
-        __raw_writel(mask, S3C2416_INTMSK2);
-}
-
-struct irq_chip s3c2416_irq_second = {
-        .irq_ack        = s3c2416_irq_ack_second,
-        .irq_mask       = s3c2416_irq_mask_second,
-        .irq_unmask     = s3c2416_irq_unmask_second,
-};
-
-
-/* IRQ initialisation code */
-
-static int s3c2416_add_sub(unsigned int base,
-                                   void (*demux)(unsigned int,
-                                                 struct irq_desc *),
-                                   struct irq_chip *chip,
-                                   unsigned int start, unsigned int end)
-{
-        unsigned int irqno;
-
-        irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-        irq_set_chained_handler(base, demux);
-
-        for (irqno = start; irqno <= end; irqno++) {
-                irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        return 0;
-}
-
-static void s3c2416_irq_add_second(void)
-{
-        unsigned long pend;
-        unsigned long last;
-        int irqno;
-        int i;
-
-        /* first, clear all interrupts pending... */
-        last = 0;
-        for (i = 0; i < 4; i++) {
-                pend = __raw_readl(S3C2416_INTPND2);
-
-                if (pend == 0 || pend == last)
-                        break;
-
-                __raw_writel(pend, S3C2416_SRCPND2);
-                __raw_writel(pend, S3C2416_INTPND2);
-                printk(KERN_INFO "irq: clearing pending status %08x\n",
-                       (int)pend);
-                last = pend;
-        }
-
-        for (irqno = IRQ_S3C2416_2D; irqno <= IRQ_S3C2416_I2S1; irqno++) {
-                switch (irqno) {
-                case IRQ_S3C2416_RESERVED2:
-                case IRQ_S3C2416_RESERVED3:
-                        /* no IRQ here */
-                        break;
-                default:
-                        irq_set_chip_and_handler(irqno, &s3c2416_irq_second,
-                                                 handle_edge_irq);
-                        set_irq_flags(irqno, IRQF_VALID);
-                }
-        }
-}
-
-static int s3c2416_irq_add(struct device *dev,
-                                  struct subsys_interface *sif)
-{
-        printk(KERN_INFO "S3C2416: IRQ Support\n");
-
-        s3c2416_add_sub(IRQ_LCD, s3c2416_irq_demux_lcd, &s3c2416_irq_lcd,
-                        IRQ_S3C2443_LCD2, IRQ_S3C2443_LCD4);
-
-        s3c2416_add_sub(IRQ_S3C2443_DMA, s3c2416_irq_demux_dma,
-                        &s3c2416_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-        s3c2416_add_sub(IRQ_S3C2443_UART3, s3c2416_irq_demux_uart3,
-                        &s3c2416_irq_uart3,
-                        IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-        s3c2416_add_sub(IRQ_WDT, s3c2416_irq_demux_wdtac97,
-                        &s3c2416_irq_wdtac97,
-                        IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-        s3c2416_irq_add_second();
-
-        return 0;
-}
-
-static struct subsys_interface s3c2416_irq_interface = {
-        .name           = "s3c2416_irq",
-        .subsys         = &s3c2416_subsys,
-        .add_dev        = s3c2416_irq_add,
-};
-
-static int __init s3c2416_irq_init(void)
-{
-        return subsys_interface_register(&s3c2416_irq_interface);
-}
-
-arch_initcall(s3c2416_irq_init);
-
-#ifdef CONFIG_PM
-static struct sleep_save irq_save[] = {
-        SAVE_ITEM(S3C2416_INTMSK2),
-};
-
-int s3c2416_irq_suspend(void)
-{
-        s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
-
-        return 0;
-}
-
-void s3c2416_irq_resume(void)
-{
-        s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
-}
-
-struct syscore_ops s3c2416_irq_syscore_ops = {
-        .suspend        = s3c2416_irq_suspend,
-        .resume         = s3c2416_irq_resume,
-};
-#endif
diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c
deleted file mode 100644
index 5e69109c0928..000000000000
--- a/arch/arm/mach-s3c24xx/irq-s3c2443.c
+++ /dev/null
@@ -1,281 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/irq.c
- *
- * Copyright (c) 2007 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-#define INTMSK(start, end) ((1 << ((end) + 1 - (start))) - 1)
-
-static inline void s3c2443_irq_demux(unsigned int irq, unsigned int len)
-{
-        unsigned int subsrc, submsk;
-        unsigned int end;
-
-        /* read the current pending interrupts, and the mask
-         * for what it is available */
-
-        subsrc = __raw_readl(S3C2410_SUBSRCPND);
-        submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-        subsrc  &= ~submsk;
-        subsrc >>= (irq - S3C2410_IRQSUB(0));
-        subsrc  &= (1 << len)-1;
-
-        end = len + irq;
-
-        for (; irq < end && subsrc; irq++) {
-                if (subsrc & 1)
-                        generic_handle_irq(irq);
-
-                subsrc >>= 1;
-        }
-}
-
-/* WDT/AC97 sub interrupts */
-
-static void s3c2443_irq_demux_wdtac97(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2443_irq_demux(IRQ_S3C2443_WDT, 4);
-}
-
-#define INTMSK_WDTAC97  (1UL << (IRQ_WDT - IRQ_EINT0))
-#define SUBMSK_WDTAC97  INTMSK(IRQ_S3C2443_WDT, IRQ_S3C2443_AC97)
-
-static void s3c2443_irq_wdtac97_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_WDTAC97);
-}
-
-static void s3c2443_irq_wdtac97_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_WDTAC97, SUBMSK_WDTAC97);
-}
-
-static struct irq_chip s3c2443_irq_wdtac97 = {
-        .irq_mask       = s3c2443_irq_wdtac97_mask,
-        .irq_unmask     = s3c2443_irq_wdtac97_unmask,
-        .irq_ack        = s3c2443_irq_wdtac97_ack,
-};
-
-/* LCD sub interrupts */
-
-static void s3c2443_irq_demux_lcd(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2443_irq_demux(IRQ_S3C2443_LCD1, 4);
-}
-
-#define INTMSK_LCD      (1UL << (IRQ_LCD - IRQ_EINT0))
-#define SUBMSK_LCD      INTMSK(IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4)
-
-static void s3c2443_irq_lcd_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_LCD);
-}
-
-static void s3c2443_irq_lcd_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_LCD, SUBMSK_LCD);
-}
-
-static struct irq_chip s3c2443_irq_lcd = {
-        .irq_mask       = s3c2443_irq_lcd_mask,
-        .irq_unmask     = s3c2443_irq_lcd_unmask,
-        .irq_ack        = s3c2443_irq_lcd_ack,
-};
-
-/* DMA sub interrupts */
-
-static void s3c2443_irq_demux_dma(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2443_irq_demux(IRQ_S3C2443_DMA0, 6);
-}
-
-#define INTMSK_DMA      (1UL << (IRQ_S3C2443_DMA - IRQ_EINT0))
-#define SUBMSK_DMA      INTMSK(IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5)
-
-static void s3c2443_irq_dma_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static void s3c2443_irq_dma_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_DMA);
-}
-
-static void s3c2443_irq_dma_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_DMA, SUBMSK_DMA);
-}
-
-static struct irq_chip s3c2443_irq_dma = {
-        .irq_mask       = s3c2443_irq_dma_mask,
-        .irq_unmask     = s3c2443_irq_dma_unmask,
-        .irq_ack        = s3c2443_irq_dma_ack,
-};
-
-/* UART3 sub interrupts */
-
-static void s3c2443_irq_demux_uart3(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2443_irq_demux(IRQ_S3C2443_RX3, 3);
-}
-
-#define INTMSK_UART3    (1UL << (IRQ_S3C2443_UART3 - IRQ_EINT0))
-#define SUBMSK_UART3    (0x7 << (IRQ_S3C2443_RX3 - S3C2410_IRQSUB(0)))
-
-static void s3c2443_irq_uart3_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_UART3);
-}
-
-static void s3c2443_irq_uart3_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_UART3, SUBMSK_UART3);
-}
-
-static struct irq_chip s3c2443_irq_uart3 = {
-        .irq_mask       = s3c2443_irq_uart3_mask,
-        .irq_unmask     = s3c2443_irq_uart3_unmask,
-        .irq_ack        = s3c2443_irq_uart3_ack,
-};
-
-/* CAM sub interrupts */
-
-static void s3c2443_irq_demux_cam(unsigned int irq, struct irq_desc *desc)
-{
-        s3c2443_irq_demux(IRQ_S3C2440_CAM_C, 4);
-}
-
-#define INTMSK_CAM      (1UL << (IRQ_CAM - IRQ_EINT0))
-#define SUBMSK_CAM      INTMSK(IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P)
-
-static void s3c2443_irq_cam_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static void s3c2443_irq_cam_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_CAM);
-}
-
-static void s3c2443_irq_cam_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_CAM, SUBMSK_CAM);
-}
-
-static struct irq_chip s3c2443_irq_cam = {
-        .irq_mask       = s3c2443_irq_cam_mask,
-        .irq_unmask     = s3c2443_irq_cam_unmask,
-        .irq_ack        = s3c2443_irq_cam_ack,
-};
-
-/* IRQ initialisation code */
-
-static int s3c2443_add_sub(unsigned int base,
-                                   void (*demux)(unsigned int,
-                                                 struct irq_desc *),
-                                   struct irq_chip *chip,
-                                   unsigned int start, unsigned int end)
-{
-        unsigned int irqno;
-
-        irq_set_chip_and_handler(base, &s3c_irq_level_chip, handle_level_irq);
-        irq_set_chained_handler(base, demux);
-
-        for (irqno = start; irqno <= end; irqno++) {
-                irq_set_chip_and_handler(irqno, chip, handle_level_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        return 0;
-}
-
-static int s3c2443_irq_add(struct device *dev,
-                                  struct subsys_interface *sif)
-{
-        printk("S3C2443: IRQ Support\n");
-
-        s3c2443_add_sub(IRQ_CAM, s3c2443_irq_demux_cam, &s3c2443_irq_cam,
-                        IRQ_S3C2440_CAM_C, IRQ_S3C2440_CAM_P);
-
-        s3c2443_add_sub(IRQ_LCD, s3c2443_irq_demux_lcd, &s3c2443_irq_lcd,
-                        IRQ_S3C2443_LCD1, IRQ_S3C2443_LCD4);
-
-        s3c2443_add_sub(IRQ_S3C2443_DMA, s3c2443_irq_demux_dma,
-                        &s3c2443_irq_dma, IRQ_S3C2443_DMA0, IRQ_S3C2443_DMA5);
-
-        s3c2443_add_sub(IRQ_S3C2443_UART3, s3c2443_irq_demux_uart3,
-                        &s3c2443_irq_uart3,
-                        IRQ_S3C2443_RX3, IRQ_S3C2443_ERR3);
-
-        s3c2443_add_sub(IRQ_WDT, s3c2443_irq_demux_wdtac97,
-                        &s3c2443_irq_wdtac97,
-                        IRQ_S3C2443_WDT, IRQ_S3C2443_AC97);
-
-        return 0;
-}
-
-static struct subsys_interface s3c2443_irq_interface = {
-        .name           = "s3c2443_irq",
-        .subsys         = &s3c2443_subsys,
-        .add_dev        = s3c2443_irq_add,
-};
-
-static int __init s3c2443_irq_init(void)
-{
-        return subsys_interface_register(&s3c2443_irq_interface);
-}
-
-arch_initcall(s3c2443_irq_init);
-
diff --git a/arch/arm/mach-s3c24xx/irq.c b/arch/arm/mach-s3c24xx/irq.c
new file mode 100644
index 000000000000..cb9f5e011e73
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/irq.c
@@ -0,0 +1,822 @@
+/*
+ * S3C24XX IRQ handling
+ *
+ * Copyright (c) 2003-2004 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ * Copyright (c) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+*/
+
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/irqdomain.h>
+
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-irqtype.h>
+#include <plat/pm.h>
+#include <plat/irq.h>
+
+#define S3C_IRQTYPE_NONE        0
+#define S3C_IRQTYPE_EINT        1
+#define S3C_IRQTYPE_EDGE        2
+#define S3C_IRQTYPE_LEVEL       3
+
+struct s3c_irq_data {
+        unsigned int type;
+        unsigned long parent_irq;
+
+        /* data gets filled during init */
+        struct s3c_irq_intc *intc;
+        unsigned long sub_bits;
+        struct s3c_irq_intc *sub_intc;
+};
+
+/*
+ * Sructure holding the controller data
+ * @reg_pending         register holding pending irqs
+ * @reg_intpnd          special register intpnd in main intc
+ * @reg_mask            mask register
+ * @domain              irq_domain of the controller
+ * @parent              parent controller for ext and sub irqs
+ * @irqs                irq-data, always s3c_irq_data[32]
+ */
+struct s3c_irq_intc {
+        void __iomem            *reg_pending;
+        void __iomem            *reg_intpnd;
+        void __iomem            *reg_mask;
+        struct irq_domain       *domain;
+        struct s3c_irq_intc     *parent;
+        struct s3c_irq_data     *irqs;
+};
+
+static void s3c_irq_mask(struct irq_data *data)
+{
+        struct s3c_irq_intc *intc = data->domain->host_data;
+        struct s3c_irq_intc *parent_intc = intc->parent;
+        struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+        struct s3c_irq_data *parent_data;
+        unsigned long mask;
+        unsigned int irqno;
+
+        mask = __raw_readl(intc->reg_mask);
+        mask |= (1UL << data->hwirq);
+        __raw_writel(mask, intc->reg_mask);
+
+        if (parent_intc && irq_data->parent_irq) {
+                parent_data = &parent_intc->irqs[irq_data->parent_irq];
+
+                /* check to see if we need to mask the parent IRQ */
+                if ((mask & parent_data->sub_bits) == parent_data->sub_bits) {
+                        irqno = irq_find_mapping(parent_intc->domain,
+                                         irq_data->parent_irq);
+                        s3c_irq_mask(irq_get_irq_data(irqno));
+                }
+        }
+}
+
+static void s3c_irq_unmask(struct irq_data *data)
+{
+        struct s3c_irq_intc *intc = data->domain->host_data;
+        struct s3c_irq_intc *parent_intc = intc->parent;
+        struct s3c_irq_data *irq_data = &intc->irqs[data->hwirq];
+        unsigned long mask;
+        unsigned int irqno;
+
+        mask = __raw_readl(intc->reg_mask);
+        mask &= ~(1UL << data->hwirq);
+        __raw_writel(mask, intc->reg_mask);
+
+        if (parent_intc && irq_data->parent_irq) {
+                irqno = irq_find_mapping(parent_intc->domain,
+                                         irq_data->parent_irq);
+                s3c_irq_unmask(irq_get_irq_data(irqno));
+        }
+}
+
+static inline void s3c_irq_ack(struct irq_data *data)
+{
+        struct s3c_irq_intc *intc = data->domain->host_data;
+        unsigned long bitval = 1UL << data->hwirq;
+
+        __raw_writel(bitval, intc->reg_pending);
+        if (intc->reg_intpnd)
+                __raw_writel(bitval, intc->reg_intpnd);
+}
+
+static int s3c_irqext_type_set(void __iomem *gpcon_reg,
+                               void __iomem *extint_reg,
+                               unsigned long gpcon_offset,
+                               unsigned long extint_offset,
+                               unsigned int type)
+{
+        unsigned long newvalue = 0, value;
+
+        /* Set the GPIO to external interrupt mode */
+        value = __raw_readl(gpcon_reg);
+        value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
+        __raw_writel(value, gpcon_reg);
+
+        /* Set the external interrupt to pointed trigger type */
+        switch (type)
+        {
+                case IRQ_TYPE_NONE:
+                        pr_warn("No edge setting!\n");
+                        break;
+
+                case IRQ_TYPE_EDGE_RISING:
+                        newvalue = S3C2410_EXTINT_RISEEDGE;
+                        break;
+
+                case IRQ_TYPE_EDGE_FALLING:
+                        newvalue = S3C2410_EXTINT_FALLEDGE;
+                        break;
+
+                case IRQ_TYPE_EDGE_BOTH:
+                        newvalue = S3C2410_EXTINT_BOTHEDGE;
+                        break;
+
+                case IRQ_TYPE_LEVEL_LOW:
+                        newvalue = S3C2410_EXTINT_LOWLEV;
+                        break;
+
+                case IRQ_TYPE_LEVEL_HIGH:
+                        newvalue = S3C2410_EXTINT_HILEV;
+                        break;
+
+                default:
+                        pr_err("No such irq type %d", type);
+                        return -EINVAL;
+        }
+
+        value = __raw_readl(extint_reg);
+        value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
+        __raw_writel(value, extint_reg);
+
+        return 0;
+}
+
+/* FIXME: make static when it's out of plat-samsung/irq.h */
+int s3c_irqext_type(struct irq_data *data, unsigned int type)
+{
+        void __iomem *extint_reg;
+        void __iomem *gpcon_reg;
+        unsigned long gpcon_offset, extint_offset;
+
+        if ((data->hwirq >= 4) && (data->hwirq <= 7)) {
+                gpcon_reg = S3C2410_GPFCON;
+                extint_reg = S3C24XX_EXTINT0;
+                gpcon_offset = (data->hwirq) * 2;
+                extint_offset = (data->hwirq) * 4;
+        } else if ((data->hwirq >= 8) && (data->hwirq <= 15)) {
+                gpcon_reg = S3C2410_GPGCON;
+                extint_reg = S3C24XX_EXTINT1;
+                gpcon_offset = (data->hwirq - 8) * 2;
+                extint_offset = (data->hwirq - 8) * 4;
+        } else if ((data->hwirq >= 16) && (data->hwirq <= 23)) {
+                gpcon_reg = S3C2410_GPGCON;
+                extint_reg = S3C24XX_EXTINT2;
+                gpcon_offset = (data->hwirq - 8) * 2;
+                extint_offset = (data->hwirq - 16) * 4;
+        } else {
+                return -EINVAL;
+        }
+
+        return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+                                   extint_offset, type);
+}
+
+static int s3c_irqext0_type(struct irq_data *data, unsigned int type)
+{
+        void __iomem *extint_reg;
+        void __iomem *gpcon_reg;
+        unsigned long gpcon_offset, extint_offset;
+
+        if ((data->hwirq >= 0) && (data->hwirq <= 3)) {
+                gpcon_reg = S3C2410_GPFCON;
+                extint_reg = S3C24XX_EXTINT0;
+                gpcon_offset = (data->hwirq) * 2;
+                extint_offset = (data->hwirq) * 4;
+        } else {
+                return -EINVAL;
+        }
+
+        return s3c_irqext_type_set(gpcon_reg, extint_reg, gpcon_offset,
+                                   extint_offset, type);
+}
+
+struct irq_chip s3c_irq_chip = {
+        .name           = "s3c",
+        .irq_ack        = s3c_irq_ack,
+        .irq_mask       = s3c_irq_mask,
+        .irq_unmask     = s3c_irq_unmask,
+        .irq_set_wake   = s3c_irq_wake
+};
+
+struct irq_chip s3c_irq_level_chip = {
+        .name           = "s3c-level",
+        .irq_mask       = s3c_irq_mask,
+        .irq_unmask     = s3c_irq_unmask,
+        .irq_ack        = s3c_irq_ack,
+};
+
+static struct irq_chip s3c_irqext_chip = {
+        .name           = "s3c-ext",
+        .irq_mask       = s3c_irq_mask,
+        .irq_unmask     = s3c_irq_unmask,
+        .irq_ack        = s3c_irq_ack,
+        .irq_set_type   = s3c_irqext_type,
+        .irq_set_wake   = s3c_irqext_wake
+};
+
+static struct irq_chip s3c_irq_eint0t4 = {
+        .name           = "s3c-ext0",
+        .irq_ack        = s3c_irq_ack,
+        .irq_mask       = s3c_irq_mask,
+        .irq_unmask     = s3c_irq_unmask,
+        .irq_set_wake   = s3c_irq_wake,
+        .irq_set_type   = s3c_irqext0_type,
+};
+
+static void s3c_irq_demux(unsigned int irq, struct irq_desc *desc)
+{
+        struct irq_chip *chip = irq_desc_get_chip(desc);
+        struct s3c_irq_intc *intc = desc->irq_data.domain->host_data;
+        struct s3c_irq_data *irq_data = &intc->irqs[desc->irq_data.hwirq];
+        struct s3c_irq_intc *sub_intc = irq_data->sub_intc;
+        unsigned long src;
+        unsigned long msk;
+        unsigned int n;
+
+        chained_irq_enter(chip, desc);
+
+        src = __raw_readl(sub_intc->reg_pending);
+        msk = __raw_readl(sub_intc->reg_mask);
+
+        src &= ~msk;
+        src &= irq_data->sub_bits;
+
+        while (src) {
+                n = __ffs(src);
+                src &= ~(1 << n);
+                generic_handle_irq(irq_find_mapping(sub_intc->domain, n));
+        }
+
+        chained_irq_exit(chip, desc);
+}
+
+#ifdef CONFIG_FIQ
+/**
+ * s3c24xx_set_fiq - set the FIQ routing
+ * @irq: IRQ number to route to FIQ on processor.
+ * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
+ *
+ * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
+ * @on is true, the @irq is checked to see if it can be routed and the
+ * interrupt controller updated to route the IRQ. If @on is false, the FIQ
+ * routing is cleared, regardless of which @irq is specified.
+ */
+int s3c24xx_set_fiq(unsigned int irq, bool on)
+{
+        u32 intmod;
+        unsigned offs;
+
+        if (on) {
+                offs = irq - FIQ_START;
+                if (offs > 31)
+                        return -EINVAL;
+
+                intmod = 1 << offs;
+        } else {
+                intmod = 0;
+        }
+
+        __raw_writel(intmod, S3C2410_INTMOD);
+        return 0;
+}
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
+#endif
+
+static int s3c24xx_irq_map(struct irq_domain *h, unsigned int virq,
+                                                        irq_hw_number_t hw)
+{
+        struct s3c_irq_intc *intc = h->host_data;
+        struct s3c_irq_data *irq_data = &intc->irqs[hw];
+        struct s3c_irq_intc *parent_intc;
+        struct s3c_irq_data *parent_irq_data;
+        unsigned int irqno;
+
+        if (!intc) {
+                pr_err("irq-s3c24xx: no controller found for hwirq %lu\n", hw);
+                return -EINVAL;
+        }
+
+        if (!irq_data) {
+                pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n", hw);
+                return -EINVAL;
+        }
+
+        /* attach controller pointer to irq_data */
+        irq_data->intc = intc;
+
+        /* set handler and flags */
+        switch (irq_data->type) {
+        case S3C_IRQTYPE_NONE:
+                return 0;
+        case S3C_IRQTYPE_EINT:
+                if (irq_data->parent_irq)
+                        irq_set_chip_and_handler(virq, &s3c_irqext_chip,
+                                                 handle_edge_irq);
+                else
+                        irq_set_chip_and_handler(virq, &s3c_irq_eint0t4,
+                                                 handle_edge_irq);
+                break;
+        case S3C_IRQTYPE_EDGE:
+                if (irq_data->parent_irq ||
+                    intc->reg_pending == S3C2416_SRCPND2)
+                        irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+                                                 handle_edge_irq);
+                else
+                        irq_set_chip_and_handler(virq, &s3c_irq_chip,
+                                                 handle_edge_irq);
+                break;
+        case S3C_IRQTYPE_LEVEL:
+                if (irq_data->parent_irq)
+                        irq_set_chip_and_handler(virq, &s3c_irq_level_chip,
+                                                 handle_level_irq);
+                else
+                        irq_set_chip_and_handler(virq, &s3c_irq_chip,
+                                                 handle_level_irq);
+                break;
+        default:
+                pr_err("irq-s3c24xx: unsupported irqtype %d\n", irq_data->type);
+                return -EINVAL;
+        }
+        set_irq_flags(virq, IRQF_VALID);
+
+        if (irq_data->parent_irq) {
+                parent_intc = intc->parent;
+                if (!parent_intc) {
+                        pr_err("irq-s3c24xx: no parent controller found for hwirq %lu\n",
+                               hw);
+                        goto err;
+                }
+
+                parent_irq_data = &parent_intc->irqs[irq_data->parent_irq];
+                if (!irq_data) {
+                        pr_err("irq-s3c24xx: no irq data found for hwirq %lu\n",
+                               hw);
+                        goto err;
+                }
+
+                parent_irq_data->sub_intc = intc;
+                parent_irq_data->sub_bits |= (1UL << hw);
+
+                /* attach the demuxer to the parent irq */
+                irqno = irq_find_mapping(parent_intc->domain,
+                                         irq_data->parent_irq);
+                if (!irqno) {
+                        pr_err("irq-s3c24xx: could not find mapping for parent irq %lu\n",
+                               irq_data->parent_irq);
+                        goto err;
+                }
+                irq_set_chained_handler(irqno, s3c_irq_demux);
+        }
+
+        return 0;
+
+err:
+        set_irq_flags(virq, 0);
+
+        /* the only error can result from bad mapping data*/
+        return -EINVAL;
+}
+
+static struct irq_domain_ops s3c24xx_irq_ops = {
+        .map = s3c24xx_irq_map,
+        .xlate = irq_domain_xlate_twocell,
+};
+
+static void s3c24xx_clear_intc(struct s3c_irq_intc *intc)
+{
+        void __iomem *reg_source;
+        unsigned long pend;
+        unsigned long last;
+        int i;
+
+        /* if intpnd is set, read the next pending irq from there */
+        reg_source = intc->reg_intpnd ? intc->reg_intpnd : intc->reg_pending;
+
+        last = 0;
+        for (i = 0; i < 4; i++) {
+                pend = __raw_readl(reg_source);
+
+                if (pend == 0 || pend == last)
+                        break;
+
+                __raw_writel(pend, intc->reg_pending);
+                if (intc->reg_intpnd)
+                        __raw_writel(pend, intc->reg_intpnd);
+
+                pr_info("irq: clearing pending status %08x\n", (int)pend);
+                last = pend;
+        }
+}
+
+struct s3c_irq_intc *s3c24xx_init_intc(struct device_node *np,
+                                       struct s3c_irq_data *irq_data,
+                                       struct s3c_irq_intc *parent,
+                                       unsigned long address)
+{
+        struct s3c_irq_intc *intc;
+        void __iomem *base = (void *)0xf6000000; /* static mapping */
+        int irq_num;
+        int irq_start;
+        int irq_offset;
+        int ret;
+
+        intc = kzalloc(sizeof(struct s3c_irq_intc), GFP_KERNEL);
+        if (!intc)
+                return ERR_PTR(-ENOMEM);
+
+        intc->irqs = irq_data;
+
+        if (parent)
+                intc->parent = parent;
+
+        /* select the correct data for the controller.
+         * Need to hard code the irq num start and offset
+         * to preserve the static mapping for now
+         */
+        switch (address) {
+        case 0x4a000000:
+                pr_debug("irq: found main intc\n");
+                intc->reg_pending = base;
+                intc->reg_mask = base + 0x08;
+                intc->reg_intpnd = base + 0x10;
+                irq_num = 32;
+                irq_start = S3C2410_IRQ(0);
+                irq_offset = 0;
+                break;
+        case 0x4a000018:
+                pr_debug("irq: found subintc\n");
+                intc->reg_pending = base + 0x18;
+                intc->reg_mask = base + 0x1c;
+                irq_num = 29;
+                irq_start = S3C2410_IRQSUB(0);
+                irq_offset = 0;
+                break;
+        case 0x4a000040:
+                pr_debug("irq: found intc2\n");
+                intc->reg_pending = base + 0x40;
+                intc->reg_mask = base + 0x48;
+                intc->reg_intpnd = base + 0x50;
+                irq_num = 8;
+                irq_start = S3C2416_IRQ(0);
+                irq_offset = 0;
+                break;
+        case 0x560000a4:
+                pr_debug("irq: found eintc\n");
+                base = (void *)0xfd000000;
+
+                intc->reg_mask = base + 0xa4;
+                intc->reg_pending = base + 0x08;
+                irq_num = 20;
+                irq_start = S3C2410_IRQ(32);
+                irq_offset = 4;
+                break;
+        default:
+                pr_err("irq: unsupported controller address\n");
+                ret = -EINVAL;
+                goto err;
+        }
+
+        /* now that all the data is complete, init the irq-domain */
+        s3c24xx_clear_intc(intc);
+        intc->domain = irq_domain_add_legacy(np, irq_num, irq_start,
+                                             irq_offset, &s3c24xx_irq_ops,
+                                             intc);
+        if (!intc->domain) {
+                pr_err("irq: could not create irq-domain\n");
+                ret = -EINVAL;
+                goto err;
+        }
+
+        return intc;
+
+err:
+        kfree(intc);
+        return ERR_PTR(ret);
+}
+
+/* s3c24xx_init_irq
+ *
+ * Initialise S3C2410 IRQ system
+*/
+
+static struct s3c_irq_data init_base[32] = {
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+        { .type = S3C_IRQTYPE_EDGE, }, /* WDT */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* LCD */
+        { .type = S3C_IRQTYPE_EDGE, }, /* DMA0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* DMA1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* DMA2 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* DMA3 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SDI */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+        { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+        { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_eint[32] = {
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT4 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT5 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT6 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 4 }, /* EINT7 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT8 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT9 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT10 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT11 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT12 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT13 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT14 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT15 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT16 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT17 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT18 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT19 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT20 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT21 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT22 */
+        { .type = S3C_IRQTYPE_EINT, .parent_irq = 5 }, /* EINT23 */
+};
+
+static struct s3c_irq_data init_subint[32] = {
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+        { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+        { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+};
+
+void __init s3c24xx_init_irq(void)
+{
+        struct s3c_irq_intc *main_intc;
+
+#ifdef CONFIG_FIQ
+        init_FIQ(FIQ_START);
+#endif
+
+        main_intc = s3c24xx_init_intc(NULL, &init_base[0], NULL, 0x4a000000);
+        if (IS_ERR(main_intc)) {
+                pr_err("irq: could not create main interrupt controller\n");
+                return;
+        }
+
+        s3c24xx_init_intc(NULL, &init_subint[0], main_intc, 0x4a000018);
+        s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+}
+
+#ifdef CONFIG_CPU_S3C2416
+static struct s3c_irq_data init_s3c2416base[32] = {
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+        { .type = S3C_IRQTYPE_NONE, }, /* reserved */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+        { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+        { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+        { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+        { .type = S3C_IRQTYPE_NONE, },
+        { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+static struct s3c_irq_data init_s3c2416subint[32] = {
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+        { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+        { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+        { .type = S3C_IRQTYPE_NONE }, /* reserved */
+        { .type = S3C_IRQTYPE_NONE }, /* reserved */
+        { .type = S3C_IRQTYPE_NONE }, /* reserved */
+        { .type = S3C_IRQTYPE_NONE }, /* reserved */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+static struct s3c_irq_data init_s3c2416_second[32] = {
+        { .type = S3C_IRQTYPE_EDGE }, /* 2D */
+        { .type = S3C_IRQTYPE_EDGE }, /* IIC1 */
+        { .type = S3C_IRQTYPE_NONE }, /* reserved */
+        { .type = S3C_IRQTYPE_NONE }, /* reserved */
+        { .type = S3C_IRQTYPE_EDGE }, /* PCM0 */
+        { .type = S3C_IRQTYPE_EDGE }, /* PCM1 */
+        { .type = S3C_IRQTYPE_EDGE }, /* I2S0 */
+        { .type = S3C_IRQTYPE_EDGE }, /* I2S1 */
+};
+
+void __init s3c2416_init_irq(void)
+{
+        struct s3c_irq_intc *main_intc;
+
+        pr_info("S3C2416: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+        init_FIQ(FIQ_START);
+#endif
+
+        main_intc = s3c24xx_init_intc(NULL, &init_s3c2416base[0], NULL, 0x4a000000);
+        if (IS_ERR(main_intc)) {
+                pr_err("irq: could not create main interrupt controller\n");
+                return;
+        }
+
+        s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+        s3c24xx_init_intc(NULL, &init_s3c2416subint[0], main_intc, 0x4a000018);
+
+        s3c24xx_init_intc(NULL, &init_s3c2416_second[0], NULL, 0x4a000040);
+}
+
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+static struct s3c_irq_data init_s3c2443base[32] = {
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT0 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT1 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT2 */
+        { .type = S3C_IRQTYPE_EINT, }, /* EINT3 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* EINT4to7 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* EINT8to23 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* CAM */
+        { .type = S3C_IRQTYPE_EDGE, }, /* nBATT_FLT */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TICK */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* WDT/AC97 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER2 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER3 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* TIMER4 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART2 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* LCD */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* DMA */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART3 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* CFON */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SDI1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SDI0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SPI0 */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* NAND */
+        { .type = S3C_IRQTYPE_EDGE, }, /* USBD */
+        { .type = S3C_IRQTYPE_EDGE, }, /* USBH */
+        { .type = S3C_IRQTYPE_EDGE, }, /* IIC */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* UART0 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* SPI1 */
+        { .type = S3C_IRQTYPE_EDGE, }, /* RTC */
+        { .type = S3C_IRQTYPE_LEVEL, }, /* ADCPARENT */
+};
+
+
+static struct s3c_irq_data init_s3c2443subint[32] = {
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 28 }, /* UART0-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 23 }, /* UART1-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 15 }, /* UART2-ERR */
+        { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* TC */
+        { .type = S3C_IRQTYPE_EDGE, .parent_irq = 31 }, /* ADC */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_C */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 6 }, /* CAM_P */
+        { .type = S3C_IRQTYPE_NONE }, /* reserved */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD1 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD2 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD3 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 16 }, /* LCD4 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA0 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA1 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA2 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA3 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA4 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 17 }, /* DMA5 */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-RX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-TX */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 18 }, /* UART3-ERR */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* WDT */
+        { .type = S3C_IRQTYPE_LEVEL, .parent_irq = 9 }, /* AC97 */
+};
+
+void __init s3c2443_init_irq(void)
+{
+        struct s3c_irq_intc *main_intc;
+
+        pr_info("S3C2443: IRQ Support\n");
+
+#ifdef CONFIG_FIQ
+        init_FIQ(FIQ_START);
+#endif
+
+        main_intc = s3c24xx_init_intc(NULL, &init_s3c2443base[0], NULL, 0x4a000000);
+        if (IS_ERR(main_intc)) {
+                pr_err("irq: could not create main interrupt controller\n");
+                return;
+        }
+
+        s3c24xx_init_intc(NULL, &init_eint[0], main_intc, 0x560000a4);
+        s3c24xx_init_intc(NULL, &init_s3c2443subint[0], main_intc, 0x4a000018);
+}
+#endif
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index f4ad99c1e476..0e0279e79150 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -237,6 +237,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
         .map_io         = amlm5900_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = amlm5900_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 1ee8c4638743..bb595f15ce36 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -28,17 +28,12 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/anubis-map.h>
-#include <mach/anubis-irq.h>
-#include <mach/anubis-cpld.h>
-
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -55,8 +50,9 @@
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
 
-#include "simtec.h"
+#include "anubis.h"
 #include "common.h"
+#include "simtec.h"
 
 #define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
@@ -237,7 +233,7 @@ static struct pata_platform_info anubis_ide_platdata = {
 static struct resource anubis_ide0_resource[] = {
         [0] = DEFINE_RES_MEM(S3C2410_CS3, 8 * 32),
         [2] = DEFINE_RES_MEM(S3C2410_CS3 + (1 << 26) + (6 * 32), 32),
-        [3] = DEFINE_RES_IRQ(IRQ_IDE0),
+        [3] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide0 = {
@@ -254,7 +250,7 @@ static struct platform_device anubis_device_ide0 = {
 static struct resource anubis_ide1_resource[] = {
         [0] = DEFINE_RES_MEM(S3C2410_CS4, 8 * 32),
         [1] = DEFINE_RES_MEM(S3C2410_CS4 + (1 << 26) + (6 * 32), 32),
-        [2] = DEFINE_RES_IRQ(IRQ_IDE0),
+        [2] = DEFINE_RES_IRQ(ANUBIS_IRQ_IDE0),
 };
 
 static struct platform_device anubis_device_ide1 = {
@@ -279,7 +275,7 @@ static struct ax_plat_data anubis_asix_platdata = {
 
 static struct resource anubis_asix_resource[] = {
         [0] = DEFINE_RES_MEM(S3C2410_CS5, 0x20 * 0x20),
-        [1] = DEFINE_RES_IRQ(IRQ_ASIX),
+        [1] = DEFINE_RES_IRQ(ANUBIS_IRQ_ASIX),
 };
 
 static struct platform_device anubis_device_asix = {
@@ -448,6 +444,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
         .map_io         = anubis_map_io,
         .init_machine   = anubis_init,
         .init_irq       = s3c24xx_init_irq,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 00381fe5de32..b4bc60c78ebb 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -14,6 +14,7 @@
 
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/list.h>
 #include <linux/timer.h>
@@ -34,7 +35,6 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -210,6 +210,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
         .map_io         = at2440evb_map_io,
         .init_machine   = at2440evb_init,
         .init_irq       = s3c24xx_init_irq,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index 6a30ce7e4aa7..ca6618081041 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -24,48 +24,41 @@
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
+#include <linux/serial_8250.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <linux/platform_data/hwmon-s3c.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
 #include <net/ax88796.h>
 
+#include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
 #include <asm/mach-types.h>
 
-//#include <asm/debug-ll.h>
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 
-#include <linux/platform_data/hwmon-s3c.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <mach/fb.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/serial_8250.h>
-
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/regs-serial.h>
 
-#include "simtec.h"
+#include "bast.h"
 #include "common.h"
+#include "simtec.h"
 
 #define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
@@ -312,7 +305,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
 static struct resource bast_dm9k_resource[] = {
         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000, 4),
         [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_DM9000 + 0x40, 0x40),
-        [2] = DEFINE_RES_NAMED(IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
+        [2] = DEFINE_RES_NAMED(BAST_IRQ_DM9000 , 1, NULL, IORESOURCE_IRQ \
                                         | IORESOURCE_IRQ_HIGHLEVEL),
 };
 
@@ -343,7 +336,7 @@ static struct platform_device bast_device_dm9k = {
 static struct plat_serial8250_port bast_sio_data[] = {
         [0] = {
                 .mapbase        = SERIAL_BASE + 0x2f8,
-                .irq            = IRQ_PCSERIAL1,
+                .irq            = BAST_IRQ_PCSERIAL1,
                 .flags          = SERIAL_FLAGS,
                 .iotype         = UPIO_MEM,
                 .regshift       = 0,
@@ -351,7 +344,7 @@ static struct plat_serial8250_port bast_sio_data[] = {
         },
         [1] = {
                 .mapbase        = SERIAL_BASE + 0x3f8,
-                .irq            = IRQ_PCSERIAL2,
+                .irq            = BAST_IRQ_PCSERIAL2,
                 .flags          = SERIAL_FLAGS,
                 .iotype         = UPIO_MEM,
                 .regshift       = 0,
@@ -390,7 +383,7 @@ static struct ax_plat_data bast_asix_platdata = {
 static struct resource bast_asix_resource[] = {
         [0] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET, 0x18 * 0x20),
         [1] = DEFINE_RES_MEM(S3C2410_CS5 + BAST_PA_ASIXNET + (0x1f * 0x20), 1),
-        [2] = DEFINE_RES_IRQ(IRQ_ASIX),
+        [2] = DEFINE_RES_IRQ(BAST_IRQ_ASIX),
 };
 
 static struct platform_device bast_device_asix = {
@@ -612,6 +605,6 @@ MACHINE_START(BAST, "Simtec-BAST")
         .map_io         = bast_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = bast_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 973b87ca87f4..a25e8c5a7b4c 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -1,6 +1,4 @@
 /*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
  * S3C2442 Machine Support for Openmoko GTA02 / FreeRunner.
  *
  * Copyright (C) 2006-2009 by Openmoko, Inc.
@@ -23,7 +21,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
  */
 
 #include <linux/kernel.h>
@@ -34,62 +31,59 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/platform_device.h>
 #include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/s3c24xx.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
 
 #include <linux/mmc/host.h>
 
+#include <linux/mfd/pcf50633/adc.h>
+#include <linux/mfd/pcf50633/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <linux/mfd/pcf50633/mbc.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/io.h>
 
-#include <linux/i2c.h>
 #include <linux/regulator/machine.h>
 
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-#include <linux/mfd/pcf50633/backlight.h>
-
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/s3c24xx.h>
 
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/irq.h>
-#include <asm/mach-types.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-ohci-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
 #include <mach/fb.h>
-
-#include <linux/platform_data/usb-ohci-s3c2410.h>
-#include <mach/regs-mem.h>
 #include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-irq.h>
 
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
-#include <plat/pm.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
+#include <plat/devs.h>
 #include <plat/gpio-cfg.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "gta02.h"
 
 static struct pcf50633 *gta02_pcf;
 
@@ -595,6 +589,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
         .map_io         = gta02_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = gta02_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index b23dd1b106e8..79bc0830d740 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-h1940.c
- *
+/*
  * Copyright (c) 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
@@ -37,40 +36,36 @@
 #include <linux/mmc/host.h>
 #include <linux/export.h>
 
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-lcd.h>
-#include <mach/regs-clock.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
 
-#include <mach/regs-gpio.h>
-#include <mach/gpio-fns.h>
-#include <mach/gpio-nrs.h>
+#include <sound/uda1380.h>
 
-#include <mach/h1940.h>
-#include <mach/h1940-latch.h>
 #include <mach/fb.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/i2c-s3c2410.h>
+#include <mach/hardware.h>
+#include <mach/regs-clock.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
-#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <plat/regs-serial.h>
 
-#include <sound/uda1380.h>
 
 #include "common.h"
+#include "h1940.h"
 
 #define H1940_LATCH             ((void __force __iomem *)0xF8000000)
 
@@ -746,6 +741,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
         .reserve        = h1940_reserve,
         .init_irq       = h1940_init_irq,
         .init_machine   = h1940_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index c9954e26b492..54e83c1f780c 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -35,9 +35,7 @@
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/fb.h>
 
@@ -56,6 +54,8 @@
 #include <plat/pm.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 
+#include "s3c2412-power.h"
+
 static struct map_desc jive_iodesc[] __initdata = {
 };
 
@@ -661,6 +661,6 @@ MACHINE_START(JIVE, "JIVE")
         .init_irq       = s3c24xx_init_irq,
         .map_io         = jive_map_io,
         .init_machine   = jive_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index a31d5b83e5f7..2865e5919f2c 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -40,7 +40,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-lcd.h>
 #include <mach/irqs.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
@@ -688,6 +687,6 @@ MACHINE_START(MINI2440, "MINI2440")
         .map_io         = mini2440_map_io,
         .init_machine   = mini2440_init,
         .init_irq       = s3c24xx_init_irq,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index c53a9bfe1417..d9d04b240295 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -589,7 +589,7 @@ MACHINE_START(N30, "Acer-N30")
                                 Ben Dooks <ben-linux@fluff.org>
         */
         .atag_offset    = 0x100,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .init_machine   = n30_init,
         .init_irq       = s3c24xx_init_irq,
         .map_io         = n30_map_io,
@@ -600,7 +600,7 @@ MACHINE_START(N35, "Acer-N35")
         /* Maintainer: Christer Weinigel <christer@weinigel.se>
         */
         .atag_offset    = 0x100,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .init_machine   = n30_init,
         .init_irq       = s3c24xx_init_irq,
         .map_io         = n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index a2b92b0898e2..a454e2461860 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -153,6 +153,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
         .map_io         = nexcoder_map_io,
         .init_machine   = nexcoder_init,
         .init_irq       = s3c24xx_init_irq,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index c52100ef2322..ae2cbdf3e3ca 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-osiris.c
- *
+/*
  * Copyright (c) 2005-2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -26,22 +25,12 @@
 
 #include <linux/i2c/tps65010.h>
 
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
-
-#include <mach/osiris-map.h>
-#include <mach/osiris-cpld.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/mach-types.h>
 
-#include <plat/cpu-freq.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
-#include <mach/regs-lcd.h>
 #include <linux/platform_data/mtd-nand-s3c2410.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -50,12 +39,20 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/gpio-cfg.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
+#include <plat/devs.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-serial.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-lcd.h>
 
 #include "common.h"
+#include "osiris.h"
+#include "regs-mem.h"
 
 /* onboard perihperal map */
 
@@ -429,6 +426,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
         .map_io         = osiris_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = osiris_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bca39f0232b3..40a47d6c6a85 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-otom.c
+/*
  *
  * Copyright (c) 2004 Nex Vision
  *   Guillaume GOURAT <guillaume.gourat@nexvision.fr>
@@ -6,7 +6,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
  */
 
 #include <linux/kernel.h>
@@ -19,26 +18,25 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
+#include <linux/platform_data/i2c-s3c2410.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/otom-map.h>
-
 #include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/s3c2410.h>
 #include <plat/clock.h>
-#include <plat/devs.h>
-#include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
+#include <plat/s3c2410.h>
 
 #include "common.h"
+#include "otom.h"
 
 static struct map_desc otom11_iodesc[] __initdata = {
   /* Device area */
@@ -118,6 +116,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
         .map_io         = otom11_map_io,
         .init_machine   = otom11_init,
         .init_irq       = s3c24xx_init_irq,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 7b6ba13d7285..56175f0941b1 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -343,6 +343,6 @@ MACHINE_START(QT2410, "QT2410")
         .map_io         = qt2410_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = qt2410_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index 0606f2faaa5c..1f9ba2ae5288 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2440/mach-rx1950.c
- *
+/*
  * Copyright (c) 2006-2009 Victor Chukhantsev, Denis Grigoriev,
  * Copyright (c) 2007-2010 Vasily Khoruzhick
  *
@@ -37,31 +36,31 @@
 
 #include <linux/mmc/host.h>
 
+#include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach-types.h>
 
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/mmc-s3cmci.h>
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+#include <linux/platform_data/usb-s3c2410_udc.h>
+
+#include <sound/uda1380.h>
+
+#include <mach/fb.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
-#include <mach/h1940.h>
-#include <mach/fb.h>
 
 #include <plat/clock.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-iic.h>
-#include <linux/platform_data/mmc-s3cmci.h>
-#include <linux/platform_data/usb-s3c2410_udc.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
 #include <plat/pm.h>
-#include <plat/irq.h>
-#include <linux/platform_data/touchscreen-s3c2410.h>
-
-#include <sound/uda1380.h>
+#include <plat/regs-iic.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "h1940.h"
 
 #define LCD_PWM_PERIOD 192960
 #define LCD_PWM_DUTY 127353
@@ -814,6 +813,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
         .reserve        = rx1950_reserve,
         .init_irq = s3c24xx_init_irq,
         .init_machine = rx1950_init_machine,
-        .timer = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index dacbb9a2122a..f20418a2fb1b 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -31,27 +31,27 @@
 #include <linux/mtd/partitions.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
+#include <mach/fb.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/h1940.h>
-#include <linux/platform_data/mtd-nand-s3c2410.h>
-#include <mach/fb.h>
-
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/devs.h>
 #include <plat/pm.h>
+#include <plat/regs-serial.h>
 
 #include "common.h"
+#include "h1940.h"
 
 static struct map_desc rx3715_iodesc[] __initdata = {
         /* dump ISA space somewhere unused */
@@ -212,6 +212,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
         .reserve        = rx3715_reserve,
         .init_irq       = rx3715_init_irq,
         .init_machine   = rx3715_init_machine,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index 82796b97cb04..e184bfa9613a 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -117,6 +117,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
         .map_io         = smdk2410_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = smdk2410_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index ce99fd8bbbc5..86d7847c9d45 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -37,7 +37,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <linux/platform_data/usb-s3c2410_udc.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <mach/fb.h>
@@ -133,7 +132,7 @@ MACHINE_START(S3C2413, "S3C2413")
         .init_irq       = s3c24xx_init_irq,
         .map_io         = smdk2413_map_io,
         .init_machine   = smdk2413_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2412_restart,
 MACHINE_END
 
@@ -145,7 +144,7 @@ MACHINE_START(SMDK2412, "SMDK2412")
         .init_irq       = s3c24xx_init_irq,
         .map_io         = smdk2413_map_io,
         .init_machine   = smdk2413_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2412_restart,
 MACHINE_END
 
@@ -157,6 +156,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
         .init_irq       = s3c24xx_init_irq,
         .map_io         = smdk2413_map_io,
         .init_machine   = smdk2413_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index f30d7fccbfee..ebb2e61f3d07 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -39,7 +39,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/regs-s3c2443-clock.h>
 
-#include <mach/idle.h>
 #include <linux/platform_data/leds-s3c24xx.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -251,9 +250,9 @@ MACHINE_START(SMDK2416, "SMDK2416")
         /* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
         .atag_offset    = 0x100,
 
-        .init_irq       = s3c24xx_init_irq,
+        .init_irq       = s3c2416_init_irq,
         .map_io         = smdk2416_map_io,
         .init_machine   = smdk2416_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index b7ff882c6ce6..08cc38c8a4ae 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -35,7 +35,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -182,6 +181,6 @@ MACHINE_START(S3C2440, "SMDK2440")
         .init_irq       = s3c24xx_init_irq,
         .map_io         = smdk2440_map_io,
         .init_machine   = smdk2440_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 2568656f046f..fc65d74d3c73 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -35,7 +35,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
@@ -141,9 +140,9 @@ MACHINE_START(SMDK2443, "SMDK2443")
         /* Maintainer: Ben Dooks <ben-linux@fluff.org> */
         .atag_offset    = 0x100,
 
-        .init_irq       = s3c24xx_init_irq,
+        .init_irq       = s3c2443_init_irq,
         .map_io         = smdk2443_map_io,
         .init_machine   = smdk2443_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2443_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 495bf5cf52e9..24b3d79e7b2c 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -149,6 +149,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
         .map_io         = tct_hammer_map_io,
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = tct_hammer_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 14d5b12e388c..ec42d1e4e465 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/mach-vr1000.c
- *
+/*
  * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
@@ -32,27 +31,25 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/bast-map.h>
-#include <mach/vr1000-map.h>
-#include <mach/vr1000-irq.h>
-#include <mach/vr1000-cpld.h>
-
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
 #include <linux/platform_data/leds-s3c24xx.h>
+#include <linux/platform_data/i2c-s3c2410.h>
+#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
 
 #include <plat/clock.h>
-#include <plat/devs.h>
 #include <plat/cpu.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/asoc-s3c24xx_simtec.h>
+#include <plat/devs.h>
+#include <plat/regs-serial.h>
 
-#include "simtec.h"
+#include "bast.h"
 #include "common.h"
+#include "simtec.h"
+#include "vr1000.h"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -143,7 +140,7 @@ static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
 static struct plat_serial8250_port serial_platform_data[] = {
         [0] = {
                 .mapbase        = VR1000_SERIAL_MAPBASE(0),
-                .irq            = IRQ_VR1000_SERIAL + 0,
+                .irq            = VR1000_IRQ_SERIAL + 0,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                 .iotype         = UPIO_MEM,
                 .regshift       = 0,
@@ -151,7 +148,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
         },
         [1] = {
                 .mapbase        = VR1000_SERIAL_MAPBASE(1),
-                .irq            = IRQ_VR1000_SERIAL + 1,
+                .irq            = VR1000_IRQ_SERIAL + 1,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                 .iotype         = UPIO_MEM,
                 .regshift       = 0,
@@ -159,7 +156,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
         },
         [2] = {
                 .mapbase        = VR1000_SERIAL_MAPBASE(2),
-                .irq            = IRQ_VR1000_SERIAL + 2,
+                .irq            = VR1000_IRQ_SERIAL + 2,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                 .iotype         = UPIO_MEM,
                 .regshift       = 0,
@@ -167,7 +164,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
         },
         [3] = {
                 .mapbase        = VR1000_SERIAL_MAPBASE(3),
-                .irq            = IRQ_VR1000_SERIAL + 3,
+                .irq            = VR1000_IRQ_SERIAL + 3,
                 .flags          = UPF_BOOT_AUTOCONF | UPF_IOREMAP,
                 .iotype         = UPIO_MEM,
                 .regshift       = 0,
@@ -189,14 +186,14 @@ static struct platform_device serial_device = {
 static struct resource vr1000_dm9k0_resource[] = {
         [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000, 4),
         [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x40, 0x40),
-        [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000A, 1, NULL, IORESOURCE_IRQ \
+        [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000A, 1, NULL, IORESOURCE_IRQ \
                                                 | IORESOURCE_IRQ_HIGHLEVEL),
 };
 
 static struct resource vr1000_dm9k1_resource[] = {
         [0] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0x80, 4),
         [1] = DEFINE_RES_MEM(S3C2410_CS5 + VR1000_PA_DM9000 + 0xC0, 0x40),
-        [2] = DEFINE_RES_NAMED(IRQ_VR1000_DM9000N, 1, NULL, IORESOURCE_IRQ \
+        [2] = DEFINE_RES_NAMED(VR1000_IRQ_DM9000N, 1, NULL, IORESOURCE_IRQ \
                                                 | IORESOURCE_IRQ_HIGHLEVEL),
 };
 
@@ -357,6 +354,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
         .map_io         = vr1000_map_io,
         .init_machine   = vr1000_init,
         .init_irq       = s3c24xx_init_irq,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index f1d44ae11833..3e2bfddc9df1 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -36,7 +36,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-lcd.h>
 
-#include <mach/idle.h>
 #include <mach/fb.h>
 
 #include <linux/platform_data/i2c-s3c2410.h>
@@ -161,6 +160,6 @@ MACHINE_START(VSTMS, "VSTMS")
         .init_irq       = s3c24xx_init_irq,
         .init_machine   = vstms_init,
         .map_io         = vstms_map_io,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h b/arch/arm/mach-s3c24xx/osiris.h
index 17380f848428..b8d56074abac 100644
--- a/arch/arm/mach-s3c24xx/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c24xx/osiris.h
@@ -1,9 +1,9 @@
-/* arch/arm/mach-s3c2410/include/mach/osiris-map.h
- *
+/*
  * Copyright 2005 Simtec Electronics
  *      http://www.simtec.co.uk/products/
  *      Ben Dooks <ben@simtec.co.uk>
  *
+ * OSIRIS - CPLD control constants
  * OSIRIS - Memory map definitions
  *
  * This program is free software; you can redistribute it and/or modify
@@ -11,10 +11,21 @@
  * published by the Free Software Foundation.
 */
 
-/* needs arch/map.h including with this */
+#ifndef __MACH_S3C24XX_OSIRIS_H
+#define __MACH_S3C24XX_OSIRIS_H __FILE__
+
+/* CTRL0 - NAND WP control */
+
+#define OSIRIS_CTRL0_NANDSEL            (0x3)
+#define OSIRIS_CTRL0_BOOT_INT           (1<<3)
+#define OSIRIS_CTRL0_PCMCIA             (1<<4)
+#define OSIRIS_CTRL0_FIX8               (1<<5)
+#define OSIRIS_CTRL0_PCMCIA_nWAIT       (1<<6)
+#define OSIRIS_CTRL0_PCMCIA_nIOIS16     (1<<7)
+
+#define OSIRIS_CTRL1_FIX8               (1<<0)
 
-#ifndef __ASM_ARCH_OSIRISMAP_H
-#define __ASM_ARCH_OSIRISMAP_H
+#define OSIRIS_ID_REVMASK               (0x7)
 
 /* start peripherals off after the S3C2410 */
 
@@ -39,4 +50,4 @@
 #define OSIRIS_VA_IDREG         OSIRIS_IOADDR(0x00700000)
 #define OSIRIS_PA_IDREG         (OSIRIS_PA_CPLD + (7<<23))
 
-#endif /* __ASM_ARCH_OSIRISMAP_H */
+#endif /* __MACH_S3C24XX_OSIRIS_H */
diff --git a/arch/arm/mach-s3c24xx/include/mach/otom-map.h b/arch/arm/mach-s3c24xx/otom.h
index f9277a52c145..321b7be1c0f7 100644
--- a/arch/arm/mach-s3c24xx/include/mach/otom-map.h
+++ b/arch/arm/mach-s3c24xx/otom.h
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/include/mach/otom-map.h
- *
+/*
  * (c) 2005 Guillaume GOURAT / NexVision
  *          guillaume.gourat@nexvision.fr
  *
@@ -10,21 +9,20 @@
  * published by the Free Software Foundation.
 */
 
-/* needs arch/map.h including with this */
-
-/* ok, we've used up to 0x01300000, now we need to find space for the
+/*
+ * ok, we've used up to 0x01300000, now we need to find space for the
  * peripherals that live in the nGCS[x] areas, which are quite numerous
  * in their space.
  */
 
-#ifndef __ASM_ARCH_OTOMMAP_H
-#define __ASM_ARCH_OTOMMAP_H
+#ifndef __MACH_S3C24XX_OTOM_H
+#define __MACH_S3C24XX_OTOM_H __FILE__
 
-#define OTOM_PA_CS8900A_BASE       (S3C2410_CS3 + 0x01000000)   /* nGCS3 +0x01000000 */
-#define OTOM_VA_CS8900A_BASE       S3C2410_ADDR(0x04000000)             /* 0xF4000000 */
+#define OTOM_PA_CS8900A_BASE    (S3C2410_CS3 + 0x01000000)      /* nGCS3 +0x01000000 */
+#define OTOM_VA_CS8900A_BASE    S3C2410_ADDR(0x04000000)        /* 0xF4000000 */
 
 /* physical offset addresses for the peripherals */
 
-#define OTOM_PA_FLASH0_BASE        (S3C2410_CS0)                                /* Bank 0 */
+#define OTOM_PA_FLASH0_BASE     (S3C2410_CS0)
 
-#endif /* __ASM_ARCH_OTOMMAP_H */
+#endif /* __MACH_S3C24XX_OTOM_H */
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c24xx/pll-s3c2410.c
index e0b3b347da82..dcf3420a3271 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2410/pll.c
- *
+/*
  * Copyright (c) 2006-2007 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -82,7 +81,6 @@ static int __init s3c2410_pll_init(void)
         return subsys_interface_register(&s3c2410_plls_interface);
 
 }
-
 arch_initcall(s3c2410_pll_init);
 
 static struct subsys_interface s3c2410a_plls_interface = {
@@ -95,5 +93,4 @@ static int __init s3c2410a_pll_init(void)
 {
         return subsys_interface_register(&s3c2410a_plls_interface);
 }
-
 arch_initcall(s3c2410a_pll_init);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index 551fb433be87..673781758319 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-12000000.c
- *
+/*
  * Copyright (c) 2006-2007 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -83,7 +82,6 @@ static int __init s3c2440_pll_12mhz(void)
         return subsys_interface_register(&s3c2440_plls12_interface);
 
 }
-
 arch_initcall(s3c2440_pll_12mhz);
 
 static struct subsys_interface s3c2442_plls12_interface = {
@@ -97,5 +95,4 @@ static int __init s3c2442_pll_12mhz(void)
         return subsys_interface_register(&s3c2442_plls12_interface);
 
 }
-
 arch_initcall(s3c2442_pll_12mhz);
diff --git a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 3f15bcf64290..debfa106289b 100644
--- a/arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -1,5 +1,4 @@
-/* arch/arm/mach-s3c2440/s3c2440-pll-16934400.c
- *
+/*
  * Copyright (c) 2006-2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
  *      Ben Dooks <ben@simtec.co.uk>
@@ -111,7 +110,6 @@ static int __init s3c2440_pll_16934400(void)
 {
         return subsys_interface_register(&s3c2440_plls169344_interface);
 }
-
 arch_initcall(s3c2440_pll_16934400);
 
 static struct subsys_interface s3c2442_plls169344_interface = {
@@ -124,5 +122,4 @@ static int __init s3c2442_pll_16934400(void)
 {
         return subsys_interface_register(&s3c2442_plls169344_interface);
 }
-
 arch_initcall(s3c2442_pll_16934400);
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2410.c b/arch/arm/mach-s3c24xx/pm-s3c2410.c
index 949ae05e07c5..2d82c4f116cd 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2410.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2410.c
@@ -29,16 +29,16 @@
 #include <linux/gpio.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/h1940.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "h1940.h"
+
 static void s3c2410_pm_prepare(void)
 {
         /* ensure at least GSTATUS3 has the resume address */
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2412.c b/arch/arm/mach-s3c24xx/pm-s3c2412.c
index f5dc2b254a5a..668a78a8b195 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2412.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2412.c
@@ -21,19 +21,19 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/cacheflush.h>
 #include <asm/irq.h>
 
-#include <mach/regs-power.h>
+#include <mach/hardware.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
-
 #include <plat/s3c2412.h>
 
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
 extern void s3c2412_sleep_enter(void);
 
 static int s3c2412_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm-s3c2416.c b/arch/arm/mach-s3c24xx/pm-s3c2416.c
index 1a9e8dd194ff..44923895f558 100644
--- a/arch/arm/mach-s3c24xx/pm-s3c2416.c
+++ b/arch/arm/mach-s3c24xx/pm-s3c2416.c
@@ -16,12 +16,13 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/regs-power.h>
 #include <mach/regs-s3c2443-clock.h>
 
 #include <plat/cpu.h>
 #include <plat/pm.h>
 
+#include "s3c2412-power.h"
+
 extern void s3c2412_sleep_enter(void);
 
 static int s3c2416_cpu_suspend(unsigned long arg)
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 724755f0b0f5..caa5b7211380 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -38,7 +38,6 @@
 #include <plat/regs-serial.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 #include <mach/regs-irq.h>
 
 #include <asm/mach/time.h>
@@ -46,6 +45,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/pm.h>
 
+#include "regs-mem.h"
+
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h b/arch/arm/mach-s3c24xx/regs-dsc.h
index 98fd4a05587c..98fd4a05587c 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-dsc.h
+++ b/arch/arm/mach-s3c24xx/regs-dsc.h
diff --git a/arch/arm/mach-s3c24xx/regs-mem.h b/arch/arm/mach-s3c24xx/regs-mem.h
new file mode 100644
index 000000000000..86b1258368c2
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/regs-mem.h
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2004 Simtec Electronics <linux@simtec.co.uk>
+ *              http://www.simtec.co.uk/products/SWLINUX/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 Memory Control register definitions
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H
+#define __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H __FILE__
+
+#define S3C2410_MEMREG(x)               (S3C24XX_VA_MEMCTRL + (x))
+
+#define S3C2410_BWSCON                  S3C2410_MEMREG(0x00)
+#define S3C2410_BANKCON0                S3C2410_MEMREG(0x04)
+#define S3C2410_BANKCON1                S3C2410_MEMREG(0x08)
+#define S3C2410_BANKCON2                S3C2410_MEMREG(0x0C)
+#define S3C2410_BANKCON3                S3C2410_MEMREG(0x10)
+#define S3C2410_BANKCON4                S3C2410_MEMREG(0x14)
+#define S3C2410_BANKCON5                S3C2410_MEMREG(0x18)
+#define S3C2410_BANKCON6                S3C2410_MEMREG(0x1C)
+#define S3C2410_BANKCON7                S3C2410_MEMREG(0x20)
+#define S3C2410_REFRESH                 S3C2410_MEMREG(0x24)
+#define S3C2410_BANKSIZE                S3C2410_MEMREG(0x28)
+
+#define S3C2410_BWSCON_ST1              (1 << 7)
+#define S3C2410_BWSCON_ST2              (1 << 11)
+#define S3C2410_BWSCON_ST3              (1 << 15)
+#define S3C2410_BWSCON_ST4              (1 << 19)
+#define S3C2410_BWSCON_ST5              (1 << 23)
+
+#define S3C2410_BWSCON_GET(_bwscon, _bank) (((_bwscon) >> ((_bank) * 4)) & 0xf)
+
+#define S3C2410_BWSCON_WS               (1 << 2)
+
+#define S3C2410_BANKCON_PMC16           (0x3)
+
+#define S3C2410_BANKCON_Tacp_SHIFT      (2)
+#define S3C2410_BANKCON_Tcah_SHIFT      (4)
+#define S3C2410_BANKCON_Tcoh_SHIFT      (6)
+#define S3C2410_BANKCON_Tacc_SHIFT      (8)
+#define S3C2410_BANKCON_Tcos_SHIFT      (11)
+#define S3C2410_BANKCON_Tacs_SHIFT      (13)
+
+#define S3C2410_BANKCON_SDRAM           (0x3 << 15)
+
+#define S3C2410_REFRESH_SELF            (1 << 22)
+
+#define S3C2410_BANKSIZE_MASK           (0x7 << 0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_REGS_MEM_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index a3c5cb086ee2..9ebef95da721 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -49,6 +49,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 /* Initial IO mappings */
 
 static struct map_desc s3c2410_iodesc[] __initdata = {
@@ -182,8 +184,8 @@ int __init s3c2410_init(void)
 
 #ifdef CONFIG_PM
         register_syscore_ops(&s3c2410_pm_syscore_ops);
-#endif
         register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
 
         return device_register(&s3c2410_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2412-power.h b/arch/arm/mach-s3c24xx/s3c2412-power.h
new file mode 100644
index 000000000000..1b02c5ddb31b
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412-power.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H
+#define __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H __FILE__
+
+#define S3C24XX_PWRREG(x)                       ((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2412_PWRMODECON                      S3C24XX_PWRREG(0x20)
+#define S3C2412_PWRCFG                          S3C24XX_PWRREG(0x24)
+
+#define S3C2412_INFORM0                         S3C24XX_PWRREG(0x70)
+#define S3C2412_INFORM1                         S3C24XX_PWRREG(0x74)
+#define S3C2412_INFORM2                         S3C24XX_PWRREG(0x78)
+#define S3C2412_INFORM3                         S3C24XX_PWRREG(0x7C)
+
+#define S3C2412_PWRCFG_BATF_IRQ                 (1 << 0)
+#define S3C2412_PWRCFG_BATF_IGNORE              (2 << 0)
+#define S3C2412_PWRCFG_BATF_SLEEP               (3 << 0)
+#define S3C2412_PWRCFG_BATF_MASK                (3 << 0)
+
+#define S3C2412_PWRCFG_STANDBYWFI_IGNORE        (0 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_IDLE          (1 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_STOP          (2 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_SLEEP         (3 << 6)
+#define S3C2412_PWRCFG_STANDBYWFI_MASK          (3 << 6)
+
+#define S3C2412_PWRCFG_RTC_MASKIRQ              (1 << 8)
+#define S3C2412_PWRCFG_NAND_NORST               (1 << 9)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_POWER_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 6c5f4031ff0c..0d592159a5c3 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s3c2412/s3c2412.c
- *
+/*
  * Copyright (c) 2006 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
  *
@@ -28,28 +27,31 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/hardware.h>
 #include <asm/proc-fns.h>
 #include <asm/irq.h>
 #include <asm/system_misc.h>
 
-#include <plat/cpu-freq.h>
-
+#include <mach/hardware.h>
 #include <mach/regs-clock.h>
-#include <plat/regs-serial.h>
-#include <mach/regs-power.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
-#include <plat/regs-spi.h>
-#include <mach/regs-s3c2412.h>
 
-#include <plat/s3c2412.h>
+#include <plat/clock.h>
 #include <plat/cpu.h>
+#include <plat/cpu-freq.h>
 #include <plat/devs.h>
-#include <plat/clock.h>
-#include <plat/pm.h>
-#include <plat/pll.h>
 #include <plat/nand-core.h>
+#include <plat/pll.h>
+#include <plat/pm.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-spi.h>
+#include <plat/s3c2412.h>
+
+#include "common.h"
+#include "regs-dsc.h"
+#include "s3c2412-power.h"
+
+#define S3C2412_SWRST                   (S3C24XX_VA_CLKPWR + 0x30)
+#define S3C2412_SWRST_RESET             (0x533C2412)
 
 #ifndef CONFIG_CPU_S3C2412_ONLY
 void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
@@ -244,8 +246,8 @@ int __init s3c2412_init(void)
 
 #ifdef CONFIG_PM
         register_syscore_ops(&s3c2412_pm_syscore_ops);
-#endif
         register_syscore_ops(&s3c24xx_irq_syscore_ops);
+#endif
 
         return device_register(&s3c2412_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2412.h b/arch/arm/mach-s3c24xx/s3c2412.h
new file mode 100644
index 000000000000..548ced42cbb7
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/s3c2412.h
@@ -0,0 +1,26 @@
+/*
+ * Copyright (c) 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_S3C24XX_S3C2412_H
+#define __ARCH_ARM_REGS_S3C24XX_S3C2412_H __FILE__
+
+#define S3C2412_MEMREG(x)               (S3C24XX_VA_MEMCTRL + (x))
+#define S3C2412_EBIREG(x)               (S3C2412_VA_EBI + (x))
+
+#define S3C2412_SSMCREG(x)              (S3C2412_VA_SSMC + (x))
+#define S3C2412_SSMC(x, o)              (S3C2412_SSMCREG((x * 0x20) + (o)))
+
+#define S3C2412_REFRESH                 S3C2412_MEMREG(0x10)
+
+#define S3C2412_EBI_BANKCFG             S3C2412_EBIREG(0x4)
+
+#define S3C2412_SSMC_BANK(x)            S3C2412_SSMC(x, 0x0)
+
+#endif /* __ARCH_ARM_MACH_S3C24XX_S3C2412_H */
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index 77ee0b732237..e30476db0295 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -63,6 +63,8 @@
 #include <plat/rtc-core.h>
 #include <plat/spi-core.h>
 
+#include "common.h"
+
 static struct map_desc s3c2416_iodesc[] __initdata = {
         IODESC_ENT(WATCHDOG),
         IODESC_ENT(CLKPWR),
@@ -105,9 +107,9 @@ int __init s3c2416_init(void)
 
 #ifdef CONFIG_PM
         register_syscore_ops(&s3c2416_pm_syscore_ops);
-#endif
         register_syscore_ops(&s3c24xx_irq_syscore_ops);
         register_syscore_ops(&s3c2416_irq_syscore_ops);
+#endif
 
         return device_register(&s3c2416_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c2440.c b/arch/arm/mach-s3c24xx/s3c2440.c
index 2b3dddb49af7..559e394e8989 100644
--- a/arch/arm/mach-s3c24xx/s3c2440.c
+++ b/arch/arm/mach-s3c24xx/s3c2440.c
@@ -40,6 +40,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 static struct device s3c2440_dev = {
         .bus            = &s3c2440_subsys,
 };
@@ -57,9 +59,9 @@ int __init s3c2440_init(void)
 
 #ifdef CONFIG_PM
         register_syscore_ops(&s3c2410_pm_syscore_ops);
+        register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
         register_syscore_ops(&s3c244x_pm_syscore_ops);
-        register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
         /* register our system device for everything else */
 
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 22cb7c94a8c8..f732826c2359 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -51,6 +51,8 @@
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
 
+#include "common.h"
+
 /* S3C2442 extended clock support */
 
 static unsigned long s3c2442_camif_upll_round(struct clk *clk,
@@ -172,9 +174,9 @@ int __init s3c2442_init(void)
 
 #ifdef CONFIG_PM
         register_syscore_ops(&s3c2410_pm_syscore_ops);
+        register_syscore_ops(&s3c24xx_irq_syscore_ops);
 #endif
         register_syscore_ops(&s3c244x_pm_syscore_ops);
-        register_syscore_ops(&s3c24xx_irq_syscore_ops);
 
         return device_register(&s3c2442_dev);
 }
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index b0b60a1154d6..ad2671baa910 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -36,7 +36,6 @@
 #include <mach/regs-clock.h>
 #include <plat/regs-serial.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-dsc.h>
 
 #include <plat/s3c2410.h>
 #include <plat/s3c244x.h>
@@ -48,6 +47,8 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "regs-dsc.h"
+
 static struct map_desc s3c244x_iodesc[] __initdata = {
         IODESC_ENT(CLKPWR),
         IODESC_ENT(TIMER),
diff --git a/arch/arm/mach-s3c24xx/simtec-audio.c b/arch/arm/mach-s3c24xx/simtec-audio.c
index fd0ef05763a9..67cb5120dfeb 100644
--- a/arch/arm/mach-s3c24xx/simtec-audio.c
+++ b/arch/arm/mach-s3c24xx/simtec-audio.c
@@ -17,16 +17,13 @@
 #include <linux/device.h>
 #include <linux/io.h>
 
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-#include <mach/bast-cpld.h>
-
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
 #include <plat/devs.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 /* platform ops for audio */
diff --git a/arch/arm/mach-s3c24xx/simtec-nor.c b/arch/arm/mach-s3c24xx/simtec-nor.c
index 029744fcaacb..8884bffa619a 100644
--- a/arch/arm/mach-s3c24xx/simtec-nor.c
+++ b/arch/arm/mach-s3c24xx/simtec-nor.c
@@ -27,9 +27,8 @@
 #include <asm/mach/irq.h>
 
 #include <mach/map.h>
-#include <mach/bast-map.h>
-#include <mach/bast-cpld.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 static void simtec_nor_vpp(struct platform_device *pdev, int vpp)
diff --git a/arch/arm/mach-s3c24xx/simtec-pm.c b/arch/arm/mach-s3c24xx/simtec-pm.c
index 699f93171297..38a2f1fdebab 100644
--- a/arch/arm/mach-s3c24xx/simtec-pm.c
+++ b/arch/arm/mach-s3c24xx/simtec-pm.c
@@ -28,12 +28,13 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
 
 #include <asm/mach-types.h>
 
 #include <plat/pm.h>
 
+#include "regs-mem.h"
+
 #define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c
index ddf7a3c743ac..2ed2e32430dc 100644
--- a/arch/arm/mach-s3c24xx/simtec-usb.c
+++ b/arch/arm/mach-s3c24xx/simtec-usb.c
@@ -28,15 +28,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/bast-map.h>
-#include <mach/bast-irq.h>
-
 #include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <linux/platform_data/usb-ohci-s3c2410.h>
 #include <plat/devs.h>
 
+#include "bast.h"
 #include "simtec.h"
 
 /* control power and monitor over-current events on various Simtec
@@ -79,7 +77,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
         int ret;
 
         if (on) {
-                ret = request_irq(IRQ_USBOC, usb_simtec_ocirq,
+                ret = request_irq(BAST_IRQ_USBOC, usb_simtec_ocirq,
                                   IRQF_DISABLED | IRQF_TRIGGER_RISING |
                                    IRQF_TRIGGER_FALLING,
                                   "USB Over-current", info);
@@ -87,7 +85,7 @@ static void usb_simtec_enableoc(struct s3c2410_hcd_info *info, int on)
                         printk(KERN_ERR "failed to request usb oc irq\n");
                 }
         } else {
-                free_irq(IRQ_USBOC, info);
+                free_irq(BAST_IRQ_USBOC, info);
         }
 }
 
diff --git a/arch/arm/mach-s3c24xx/sleep-s3c2410.S b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
index 65200ae72c90..dd47c8fa07fa 100644
--- a/arch/arm/mach-s3c24xx/sleep-s3c2410.S
+++ b/arch/arm/mach-s3c24xx/sleep-s3c2410.S
@@ -31,9 +31,10 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
 #include <plat/regs-serial.h>
 
+#include "regs-mem.h"
+
         /* s3c2410_cpu_suspend
          *
          * put the cpu into sleep mode
diff --git a/arch/arm/mach-s3c24xx/sleep.S b/arch/arm/mach-s3c24xx/sleep.S
index c56612569b40..7f378b662da6 100644
--- a/arch/arm/mach-s3c24xx/sleep.S
+++ b/arch/arm/mach-s3c24xx/sleep.S
@@ -31,7 +31,6 @@
 
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-mem.h>
 #include <plat/regs-serial.h>
 
 /* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
diff --git a/arch/arm/mach-s3c24xx/vr1000.h b/arch/arm/mach-s3c24xx/vr1000.h
new file mode 100644
index 000000000000..7fcd2c2f183c
--- /dev/null
+++ b/arch/arm/mach-s3c24xx/vr1000.h
@@ -0,0 +1,118 @@
+
+/* arch/arm/mach-s3c2410/include/mach/vr1000-cpld.h
+ *
+ * Copyright (c) 2003 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * VR1000 - CPLD control constants
+ * Machine VR1000 - IRQ Number definitions
+ * Machine VR1000 - Memory map definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C24XX_VR1000_H
+#define __MACH_S3C24XX_VR1000_H __FILE__
+
+#define VR1000_CPLD_CTRL2_RAMWEN        (0x04)  /* SRAM Write Enable */
+
+/* irq numbers to onboard peripherals */
+
+#define VR1000_IRQ_USBOC                IRQ_EINT19
+#define VR1000_IRQ_IDE0                 IRQ_EINT16
+#define VR1000_IRQ_IDE1                 IRQ_EINT17
+#define VR1000_IRQ_SERIAL               IRQ_EINT12
+#define VR1000_IRQ_DM9000A              IRQ_EINT10
+#define VR1000_IRQ_DM9000N              IRQ_EINT9
+#define VR1000_IRQ_SMALERT              IRQ_EINT8
+
+/* map */
+
+#define VR1000_IOADDR(x)                (S3C2410_ADDR((x) + 0x01300000))
+
+/* we put the CPLD registers next, to get them out of the way */
+
+#define VR1000_VA_CTRL1                 VR1000_IOADDR(0x00000000) /* 0x01300000 */
+#define VR1000_PA_CTRL1                 (S3C2410_CS5 | 0x7800000)
+
+#define VR1000_VA_CTRL2                 VR1000_IOADDR(0x00100000) /* 0x01400000 */
+#define VR1000_PA_CTRL2                 (S3C2410_CS1 | 0x6000000)
+
+#define VR1000_VA_CTRL3                 VR1000_IOADDR(0x00200000) /* 0x01500000 */
+#define VR1000_PA_CTRL3                 (S3C2410_CS1 | 0x6800000)
+
+#define VR1000_VA_CTRL4                 VR1000_IOADDR(0x00300000) /* 0x01600000 */
+#define VR1000_PA_CTRL4                 (S3C2410_CS1 | 0x7000000)
+
+/* next, we have the PC104 ISA interrupt registers */
+
+#define VR1000_PA_PC104_IRQREQ          (S3C2410_CS5 | 0x6000000) /* 0x01700000 */
+#define VR1000_VA_PC104_IRQREQ          VR1000_IOADDR(0x00400000)
+
+#define VR1000_PA_PC104_IRQRAW          (S3C2410_CS5 | 0x6800000) /* 0x01800000 */
+#define VR1000_VA_PC104_IRQRAW          VR1000_IOADDR(0x00500000)
+
+#define VR1000_PA_PC104_IRQMASK         (S3C2410_CS5 | 0x7000000) /* 0x01900000 */
+#define VR1000_VA_PC104_IRQMASK         VR1000_IOADDR(0x00600000)
+
+/*
+ * 0xE0000000 contains the IO space that is split by speed and
+ * whether the access is for 8 or 16bit IO... this ensures that
+ * the correct access is made
+ *
+ * 0x10000000 of space, partitioned as so:
+ *
+ * 0x00000000 to 0x04000000  8bit,  slow
+ * 0x04000000 to 0x08000000  16bit, slow
+ * 0x08000000 to 0x0C000000  16bit, net
+ * 0x0C000000 to 0x10000000  16bit, fast
+ *
+ * each of these spaces has the following in:
+ *
+ * 0x02000000 to 0x02100000 1MB  IDE primary channel
+ * 0x02100000 to 0x02200000 1MB  IDE primary channel aux
+ * 0x02200000 to 0x02400000 1MB  IDE secondary channel
+ * 0x02300000 to 0x02400000 1MB  IDE secondary channel aux
+ * 0x02500000 to 0x02600000 1MB  Davicom DM9000 ethernet controllers
+ * 0x02600000 to 0x02700000 1MB
+ *
+ * the phyiscal layout of the zones are:
+ *  nGCS2 - 8bit, slow
+ *  nGCS3 - 16bit, slow
+ *  nGCS4 - 16bit, net
+ *  nGCS5 - 16bit, fast
+ */
+
+#define VR1000_VA_MULTISPACE    (0xE0000000)
+
+#define VR1000_VA_ISAIO         (VR1000_VA_MULTISPACE + 0x00000000)
+#define VR1000_VA_ISAMEM        (VR1000_VA_MULTISPACE + 0x01000000)
+#define VR1000_VA_IDEPRI        (VR1000_VA_MULTISPACE + 0x02000000)
+#define VR1000_VA_IDEPRIAUX     (VR1000_VA_MULTISPACE + 0x02100000)
+#define VR1000_VA_IDESEC        (VR1000_VA_MULTISPACE + 0x02200000)
+#define VR1000_VA_IDESECAUX     (VR1000_VA_MULTISPACE + 0x02300000)
+#define VR1000_VA_ASIXNET       (VR1000_VA_MULTISPACE + 0x02400000)
+#define VR1000_VA_DM9000        (VR1000_VA_MULTISPACE + 0x02500000)
+#define VR1000_VA_SUPERIO       (VR1000_VA_MULTISPACE + 0x02600000)
+
+/* physical offset addresses for the peripherals */
+
+#define VR1000_PA_IDEPRI        (0x02000000)
+#define VR1000_PA_IDEPRIAUX     (0x02800000)
+#define VR1000_PA_IDESEC        (0x03000000)
+#define VR1000_PA_IDESECAUX     (0x03800000)
+#define VR1000_PA_DM9000        (0x05000000)
+
+#define VR1000_PA_SERIAL        (0x11800000)
+#define VR1000_VA_SERIAL        (VR1000_IOADDR(0x00700000))
+
+/* VR1000 ram is in CS1, with A26..A24 = 2_101 */
+#define VR1000_PA_SRAM          (S3C2410_CS1 | 0x05000000)
+
+/* some configurations for the peripherals */
+
+#define VR1000_DM9000_CS        VR1000_VAM_CS4
+
+#endif /* __MACH_S3C24XX_VR1000_H */
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 803711e283b2..8499415be9cd 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -23,7 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-clock.h>
 
 #include <plat/cpu.h>
@@ -33,6 +32,8 @@
 #include <plat/clock-clksrc.h>
 #include <plat/pll.h>
 
+#include "regs-sys.h"
+
 /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call
  * ext_xtal_mux for want of an actual name from the manual.
 */
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index aef303b8997e..0b9c0ba44834 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -25,10 +25,10 @@
 #include <linux/dma-mapping.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/hardware/vic.h>
 #include <asm/system_misc.h>
 
 #include <mach/map.h>
diff --git a/arch/arm/mach-s3c64xx/cpuidle.c b/arch/arm/mach-s3c64xx/cpuidle.c
index acb197ccf3f7..ead5fab0dbb5 100644
--- a/arch/arm/mach-s3c64xx/cpuidle.c
+++ b/arch/arm/mach-s3c64xx/cpuidle.c
@@ -20,8 +20,8 @@
 
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
-#include <mach/regs-syscon-power.h>
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
 
 static int s3c64xx_enter_idle(struct cpuidle_device *dev,
                               struct cpuidle_driver *drv,
diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/crag6410.h
index 4c3c9994fc2c..4c3c9994fc2c 100644
--- a/arch/arm/mach-s3c64xx/include/mach/crag6410.h
+++ b/arch/arm/mach-s3c64xx/crag6410.h
diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c
index f2a7a1725596..ec29b35f25c0 100644
--- a/arch/arm/mach-s3c64xx/dma.c
+++ b/arch/arm/mach-s3c64xx/dma.c
@@ -28,10 +28,10 @@
 #include <mach/map.h>
 #include <mach/irqs.h>
 
-#include <mach/regs-sys.h>
-
 #include <asm/hardware/pl080.h>
 
+#include "regs-sys.h"
+
 /* dma channel state information */
 
 struct s3c64xx_dmac {
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
index bcce68a0bb75..6a1127891c87 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
+++ b/arch/arm/mach-s3c64xx/include/mach/regs-irq.h
@@ -15,6 +15,5 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/vic.h>
 
 #endif /* __ASM_ARCH_6400_REGS_IRQ_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
deleted file mode 100644
index b91e02093289..000000000000
--- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * S3C64XX system register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_SYS_H
-#define __PLAT_REGS_SYS_H __FILE__
-
-#define S3C_SYSREG(x)           (S3C_VA_SYS + (x))
-
-#define S3C64XX_AHB_CON0        S3C_SYSREG(0x100)
-#define S3C64XX_AHB_CON1        S3C_SYSREG(0x104)
-#define S3C64XX_AHB_CON2        S3C_SYSREG(0x108)
-
-#define S3C64XX_SDMA_SEL        S3C_SYSREG(0x110)
-
-#define S3C64XX_OTHERS          S3C_SYSREG(0x900)
-
-#define S3C64XX_OTHERS_USBMASK  (1 << 16)
-#define S3C64XX_OTHERS_SYNCMUXSEL       (1 << 6)
-
-#endif /* _PLAT_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/tick.h b/arch/arm/mach-s3c64xx/include/mach/tick.h
index ebe18a9469b8..db9c1b1d56a4 100644
--- a/arch/arm/mach-s3c64xx/include/mach/tick.h
+++ b/arch/arm/mach-s3c64xx/include/mach/tick.h
@@ -15,6 +15,8 @@
 #ifndef __ASM_ARCH_TICK_H
 #define __ASM_ARCH_TICK_H __FILE__
 
+#include <linux/irqchip/arm-vic.h>
+
 /* note, the timer interrutps turn up in 2 places, the vic and then
  * the timer block. We take the VIC as the base at the moment.
  */
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 99e82ac81b69..728eef3296b2 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -31,7 +31,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -50,9 +49,9 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
 
 #include "common.h"
+#include "regs-modem.h"
 
 /* DM9000 */
 #define ANW6410_PA_DM9000       (0x18000000)
@@ -230,10 +229,9 @@ MACHINE_START(ANW6410, "A&W6410")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = anw6410_map_io,
         .init_machine   = anw6410_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 755c0bb119f4..bf3d1c09b085 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -29,7 +29,7 @@
 
 #include <linux/platform_data/spi-s3c64xx.h>
 
-#include <mach/crag6410.h>
+#include "crag6410.h"
 
 static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
         .line = S3C64XX_GPC(3),
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index bf6311a28f3d..1acf02bace57 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -42,7 +42,6 @@
 
 #include <sound/wm1250-ev1.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -50,12 +49,7 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/crag6410.h>
-
-#include <mach/regs-gpio-memport.h>
 
 #include <plat/regs-serial.h>
 #include <plat/fb.h>
@@ -72,6 +66,10 @@
 #include <plat/pm.h>
 
 #include "common.h"
+#include "crag6410.h"
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
 
 /* serial port setup */
 
@@ -867,10 +865,9 @@ MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
         /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = crag6410_map_io,
         .init_machine   = crag6410_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index 2b144893ddc4..7212eb9cfeb9 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -30,7 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -273,10 +272,9 @@ MACHINE_START(HMT, "Airgoo-HMT")
         /* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = hmt_map_io,
         .init_machine   = hmt_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 07c349cca333..4b41fcdaa7b6 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -24,15 +24,12 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
@@ -46,6 +43,8 @@
 #include <video/samsung_fimd.h>
 
 #include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
 
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -352,10 +351,9 @@ MACHINE_START(MINI6410, "MINI6410")
         /* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = mini6410_map_io,
         .init_machine   = mini6410_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index e5f9a79b535d..8d3cedd995ff 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -26,7 +26,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -101,10 +100,9 @@ MACHINE_START(NCP, "NCP")
         /* Maintainer: Samsung Electronics */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = ncp_map_io,
         .init_machine   = ncp_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 7476f7c722ab..fa12bd21ad82 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -25,15 +25,12 @@
 #include <linux/serial_core.h>
 #include <linux/types.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
-#include <mach/regs-srom.h>
 
 #include <plat/adc.h>
 #include <plat/cpu.h>
@@ -47,6 +44,8 @@
 #include <video/samsung_fimd.h>
 
 #include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
 
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -331,10 +330,9 @@ MACHINE_START(REAL6410, "REAL6410")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = real6410_map_io,
         .init_machine   = real6410_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index c6d7390939ae..fc3e9b32e26f 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -25,7 +25,6 @@
 
 #include <mach/map.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-modem.h>
 
 #include <plat/clock.h>
 #include <plat/cpu.h>
@@ -41,6 +40,7 @@
 #include <video/platform_lcd.h>
 
 #include "common.h"
+#include "regs-modem.h"
 
 #define UCON S3C2410_UCON_DEFAULT
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 96d6da2b6b5f..ca2afcfce573 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -17,7 +17,6 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -153,10 +152,9 @@ MACHINE_START(SMARTQ5, "SmartQ 5")
         /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smartq_map_io,
         .init_machine   = smartq5_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 7d1167bdc921..37bb0c632a5e 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -17,7 +17,6 @@
 #include <linux/leds.h>
 #include <linux/platform_device.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -169,10 +168,9 @@ MACHINE_START(SMARTQ7, "SmartQ 7")
         /* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
         .atag_offset    = 0x100,
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smartq_map_io,
         .init_machine   = smartq7_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index a928fae5694e..a392869c8342 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -22,7 +22,6 @@
 
 #include <asm/mach-types.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -90,10 +89,9 @@ MACHINE_START(SMDK6400, "SMDK6400")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6400_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6400_map_io,
         .init_machine   = smdk6400_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index 574a9eef588d..ba7544e2d04d 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -45,7 +45,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -57,10 +56,7 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <mach/regs-modem.h>
 #include <mach/regs-gpio.h>
-#include <mach/regs-sys.h>
-#include <mach/regs-srom.h>
 #include <linux/platform_data/ata-samsung_cf.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 #include <plat/fb.h>
@@ -75,6 +71,9 @@
 #include <plat/backlight.h>
 
 #include "common.h"
+#include "regs-modem.h"
+#include "regs-srom.h"
+#include "regs-sys.h"
 
 #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
 #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
@@ -700,10 +699,9 @@ MACHINE_START(SMDK6410, "SMDK6410")
         .atag_offset    = 0x100,
 
         .init_irq       = s3c6410_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6410_map_io,
         .init_machine   = smdk6410_machine_init,
         .init_late      = s3c64xx_init_late,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s3c64xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c
index ce8499063228..6a1f91fea678 100644
--- a/arch/arm/mach-s3c64xx/pm.c
+++ b/arch/arm/mach-s3c64xx/pm.c
@@ -26,12 +26,13 @@
 #include <plat/pm.h>
 #include <plat/wakeup-mask.h>
 
-#include <mach/regs-sys.h>
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
-#include <mach/regs-syscon-power.h>
-#include <mach/regs-gpio-memport.h>
-#include <mach/regs-modem.h>
+
+#include "regs-gpio-memport.h"
+#include "regs-modem.h"
+#include "regs-sys.h"
+#include "regs-syscon-power.h"
 
 struct s3c64xx_pm_domain {
         char *const name;
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h b/arch/arm/mach-s3c64xx/regs-gpio-memport.h
index 82342f6fd27d..b927593019f5 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-gpio-memport.h
+++ b/arch/arm/mach-s3c64xx/regs-gpio-memport.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio-memport.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      Ben Dooks <ben@simtec.co.uk>
@@ -8,8 +7,8 @@
  * S3C64XX - GPIO memory port register definitions
  */
 
-#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H
-#define __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_GPIO_MEMPORT_H
+#define __MACH_S3C64XX_REGS_GPIO_MEMPORT_H __FILE__
 
 #define S3C64XX_MEM0CONSTOP     S3C64XX_GPIOREG(0x1B0)
 #define S3C64XX_MEM1CONSTOP     S3C64XX_GPIOREG(0x1B4)
@@ -21,5 +20,5 @@
 #define S3C64XX_MEM0DRVCON      S3C64XX_GPIOREG(0x1D0)
 #define S3C64XX_MEM1DRVCON      S3C64XX_GPIOREG(0x1D4)
 
-#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_MEMPORT_H */
+#endif /* __MACH_S3C64XX_REGS_GPIO_MEMPORT_H */
 
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h b/arch/arm/mach-s3c64xx/regs-modem.h
index 49f7759dedfa..073cdd3a03be 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-modem.h
+++ b/arch/arm/mach-s3c64xx/regs-modem.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-modem.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
@@ -12,10 +11,10 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __PLAT_S3C64XX_REGS_MODEM_H
-#define __PLAT_S3C64XX_REGS_MODEM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_MODEM_H
+#define __MACH_S3C64XX_REGS_MODEM_H __FILE__
 
-#define S3C64XX_MODEMREG(x)     (S3C64XX_VA_MODEM + (x))
+#define S3C64XX_MODEMREG(x)                     (S3C64XX_VA_MODEM + (x))
 
 #define S3C64XX_MODEM_INT2AP                    S3C64XX_MODEMREG(0x0)
 #define S3C64XX_MODEM_INT2MODEM                 S3C64XX_MODEMREG(0x4)
@@ -28,4 +27,4 @@
 #define MIFPCON_INT2M_LEVEL                     (1 << 4)
 #define MIFPCON_LCD_BYPASS                      (1 << 3)
 
-#endif /* __PLAT_S3C64XX_REGS_MODEM_H */
+#endif /* __MACH_S3C64XX_REGS_MODEM_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h b/arch/arm/mach-s3c64xx/regs-srom.h
index 756731b36297..d56f3386eb00 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-srom.h
+++ b/arch/arm/mach-s3c64xx/regs-srom.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-srom.h
- *
+/*
  * Copyright 2009 Andy Green <andy@warmcat.com>
  *
  * S3C64XX SROM definitions
@@ -9,8 +8,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __PLAT_REGS_SROM_H
-#define __PLAT_REGS_SROM_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SROM_H
+#define __MACH_S3C64XX_REGS_SROM_H __FILE__
 
 #define S3C64XX_SROMREG(x)      (S3C_VA_MEM + (x))
 
@@ -29,7 +28,7 @@
 #define S3C64XX_SROM_BW__DATAWIDTH__SHIFT       0
 #define S3C64XX_SROM_BW__WAITENABLE__SHIFT      2
 #define S3C64XX_SROM_BW__BYTEENABLE__SHIFT      3
-#define S3C64XX_SROM_BW__CS_MASK 0xf
+#define S3C64XX_SROM_BW__CS_MASK                0xf
 
 #define S3C64XX_SROM_BW__NCS0__SHIFT    0
 #define S3C64XX_SROM_BW__NCS1__SHIFT    4
@@ -56,4 +55,4 @@
 #define S3C64XX_SROM_BCX__TACS__SHIFT   28
 #define S3C64XX_SROM_BCX__TACS__MASK    0xf
 
-#endif /* _PLAT_REGS_SROM_H */
+#endif /* __MACH_S3C64XX_REGS_SROM_H */
diff --git a/arch/arm/mach-s3c64xx/regs-sys.h b/arch/arm/mach-s3c64xx/regs-sys.h
new file mode 100644
index 000000000000..8c411fbb0cd9
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/regs-sys.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX system register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __MACH_S3C64XX_REGS_SYS_H
+#define __MACH_S3C64XX_REGS_SYS_H __FILE__
+
+#define S3C_SYSREG(x)                   (S3C_VA_SYS + (x))
+
+#define S3C64XX_AHB_CON0                S3C_SYSREG(0x100)
+#define S3C64XX_AHB_CON1                S3C_SYSREG(0x104)
+#define S3C64XX_AHB_CON2                S3C_SYSREG(0x108)
+
+#define S3C64XX_SDMA_SEL                S3C_SYSREG(0x110)
+
+#define S3C64XX_OTHERS                  S3C_SYSREG(0x900)
+
+#define S3C64XX_OTHERS_USBMASK          (1 << 16)
+#define S3C64XX_OTHERS_SYNCMUXSEL       (1 << 6)
+
+#endif /* __MACH_S3C64XX_REGS_SYS_H */
diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h b/arch/arm/mach-s3c64xx/regs-syscon-power.h
index 270d96ac9705..6e16b3404da9 100644
--- a/arch/arm/mach-s3c64xx/include/mach/regs-syscon-power.h
+++ b/arch/arm/mach-s3c64xx/regs-syscon-power.h
@@ -1,5 +1,4 @@
-/* arch/arm/plat-s3c64xx/include/plat/regs-syscon-power.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
  *      http://armlinux.simtec.co.uk/
@@ -12,8 +11,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __PLAT_S3C64XX_REGS_SYSCON_POWER_H
-#define __PLAT_S3C64XX_REGS_SYSCON_POWER_H __FILE__
+#ifndef __MACH_S3C64XX_REGS_SYSCON_POWER_H
+#define __MACH_S3C64XX_REGS_SYSCON_POWER_H __FILE__
 
 #define S3C64XX_PWR_CFG                         S3C_SYSREG(0x804)
 
@@ -113,4 +112,4 @@
 #define S3C64XX_INFORM2                         S3C_SYSREG(0xA08)
 #define S3C64XX_INFORM3                         S3C_SYSREG(0xA0C)
 
-#endif /* __PLAT_S3C64XX_REGS_SYSCON_POWER_H */
+#endif /* __MACH_S3C64XX_REGS_SYSCON_POWER_H */
diff --git a/arch/arm/mach-s3c64xx/setup-usb-phy.c b/arch/arm/mach-s3c64xx/setup-usb-phy.c
index f6757e02d7db..c8174d95339b 100644
--- a/arch/arm/mach-s3c64xx/setup-usb-phy.c
+++ b/arch/arm/mach-s3c64xx/setup-usb-phy.c
@@ -15,11 +15,12 @@
 #include <linux/io.h>
 #include <linux/platform_device.h>
 #include <mach/map.h>
-#include <mach/regs-sys.h>
 #include <plat/cpu.h>
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/usb-phy.h>
 
+#include "regs-sys.h"
+
 static int s3c_usb_otgphy_init(struct platform_device *pdev)
 {
         struct clk *xusbxti;
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index 5112371079d0..3537815247f1 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -23,7 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -32,6 +31,7 @@
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
 
+#include "clock.h"
 #include "common.h"
 
 static u32 epll_div[][5] = {
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index 154dea702d70..af384ddd2dcf 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -23,7 +23,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/s5p64x0-clock.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -32,6 +31,7 @@
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
 
+#include "clock.h"
 #include "common.h"
 
 static struct clksrc_clk clk_mout_dpll = {
diff --git a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h b/arch/arm/mach-s5p64x0/clock.h
index 0ef47d1b7670..28b8e3c6bd24 100644
--- a/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
+++ b/arch/arm/mach-s5p64x0/clock.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *              http://www.samsung.com
  *
@@ -10,8 +9,8 @@
  * published by the Free Software Foundation.
 */
 
-#ifndef __ASM_ARCH_CLOCK_H
-#define __ASM_ARCH_CLOCK_H __FILE__
+#ifndef __MACH_S5P64X0_CLOCK_H
+#define __MACH_S5P64X0_CLOCK_H __FILE__
 
 #include <linux/clk.h>
 
@@ -36,4 +35,4 @@ extern int s5p64x0_mem_ctrl(struct clk *clk, int enable);
 
 extern int s5p64x0_clk48m_ctrl(struct clk *clk, int enable);
 
-#endif /* __ASM_ARCH_CLOCK_H */
+#endif /* __MACH_S5P64X0_CLOCK_H */
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
deleted file mode 100644
index 700dac6c43f3..000000000000
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ /dev/null
@@ -1,508 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/gpiolib.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * S5P64X0 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-clock.h>
-
-#include <plat/cpu.h>
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-/*
- * S5P6440 GPIO bank summary:
- *
- * Bank GPIOs   Style   SlpCon  ExtInt Group
- * A    6       4Bit    Yes     1
- * B    7       4Bit    Yes     1
- * C    8       4Bit    Yes     2
- * F    2       2Bit    Yes     4 [1]
- * G    7       4Bit    Yes     5
- * H    10      4Bit[2] Yes     6
- * I    16      2Bit    Yes     None
- * J    12      2Bit    Yes     None
- * N    16      2Bit    No      IRQ_EINT
- * P    8       2Bit    Yes     8
- * R    15      4Bit[2] Yes     8
- *
- * S5P6450 GPIO bank summary:
- *
- * Bank GPIOs   Style   SlpCon  ExtInt Group
- * A    6       4Bit    Yes     1
- * B    7       4Bit    Yes     1
- * C    8       4Bit    Yes     2
- * D    8       4Bit    Yes     None
- * F    2       2Bit    Yes     None
- * G    14      4Bit[2] Yes     5
- * H    10      4Bit[2] Yes     6
- * I    16      2Bit    Yes     None
- * J    12      2Bit    Yes     None
- * K    5       4Bit    Yes     None
- * N    16      2Bit    No      IRQ_EINT
- * P    11      2Bit    Yes     8
- * Q    14      2Bit    Yes     None
- * R    15      4Bit[2] Yes     None
- * S    8       2Bit    Yes     None
- *
- * [1] BANKF pins 14,15 do not form part of the external interrupt sources
- * [2] BANK has two control registers, GPxCON0 and GPxCON1
- */
-
-static int s5p64x0_gpiolib_rbank_4bit2_input(struct gpio_chip *chip,
-                                             unsigned int offset)
-{
-        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-        void __iomem *base = ourchip->base;
-        void __iomem *regcon = base;
-        unsigned long con;
-        unsigned long flags;
-
-        switch (offset) {
-        case 6:
-                offset += 1;
-        case 0:
-        case 1:
-        case 2:
-        case 3:
-        case 4:
-        case 5:
-                regcon -= 4;
-                break;
-        default:
-                offset -= 7;
-                break;
-        }
-
-        s3c_gpio_lock(ourchip, flags);
-
-        con = __raw_readl(regcon);
-        con &= ~(0xf << con_4bit_shift(offset));
-        __raw_writel(con, regcon);
-
-        s3c_gpio_unlock(ourchip, flags);
-
-        return 0;
-}
-
-static int s5p64x0_gpiolib_rbank_4bit2_output(struct gpio_chip *chip,
-                                              unsigned int offset, int value)
-{
-        struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
-        void __iomem *base = ourchip->base;
-        void __iomem *regcon = base;
-        unsigned long con;
-        unsigned long dat;
-        unsigned long flags;
-        unsigned con_offset  = offset;
-
-        switch (con_offset) {
-        case 6:
-                con_offset += 1;
-        case 0:
-        case 1:
-        case 2:
-        case 3:
-        case 4:
-        case 5:
-                regcon -= 4;
-                break;
-        default:
-                con_offset -= 7;
-                break;
-        }
-
-        s3c_gpio_lock(ourchip, flags);
-
-        con = __raw_readl(regcon);
-        con &= ~(0xf << con_4bit_shift(con_offset));
-        con |= 0x1 << con_4bit_shift(con_offset);
-
-        dat = __raw_readl(base + GPIODAT_OFF);
-        if (value)
-                dat |= 1 << offset;
-        else
-                dat &= ~(1 << offset);
-
-        __raw_writel(con, regcon);
-        __raw_writel(dat, base + GPIODAT_OFF);
-
-        s3c_gpio_unlock(ourchip, flags);
-
-        return 0;
-}
-
-int s5p64x0_gpio_setcfg_4bit_rbank(struct s3c_gpio_chip *chip,
-                                   unsigned int off, unsigned int cfg)
-{
-        void __iomem *reg = chip->base;
-        unsigned int shift;
-        u32 con;
-
-        switch (off) {
-        case 0:
-        case 1:
-        case 2:
-        case 3:
-        case 4:
-        case 5:
-                shift = (off & 7) * 4;
-                reg -= 4;
-                break;
-        case 6:
-                shift = ((off + 1) & 7) * 4;
-                reg -= 4;
-        default:
-                shift = ((off + 1) & 7) * 4;
-                break;
-        }
-
-        if (s3c_gpio_is_cfg_special(cfg)) {
-                cfg &= 0xf;
-                cfg <<= shift;
-        }
-
-        con = __raw_readl(reg);
-        con &= ~(0xf << shift);
-        con |= cfg;
-        __raw_writel(con, reg);
-
-        return 0;
-}
-
-static struct s3c_gpio_cfg s5p64x0_gpio_cfgs[] = {
-        {
-                .cfg_eint       = 0,
-        }, {
-                .cfg_eint       = 7,
-        }, {
-                .cfg_eint       = 3,
-                .set_config     = s5p64x0_gpio_setcfg_4bit_rbank,
-        }, {
-                .cfg_eint       = 0,
-                .set_config     = s3c_gpio_setcfg_s3c24xx,
-                .get_config     = s3c_gpio_getcfg_s3c24xx,
-        }, {
-                .cfg_eint       = 2,
-                .set_config     = s3c_gpio_setcfg_s3c24xx,
-                .get_config     = s3c_gpio_getcfg_s3c24xx,
-        }, {
-                .cfg_eint       = 3,
-                .set_config     = s3c_gpio_setcfg_s3c24xx,
-                .get_config     = s3c_gpio_getcfg_s3c24xx,
-        },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit[] = {
-        {
-                .base   = S5P64X0_GPA_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6440_GPA(0),
-                        .ngpio  = S5P6440_GPIO_A_NR,
-                        .label  = "GPA",
-                },
-        }, {
-                .base   = S5P64X0_GPB_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6440_GPB(0),
-                        .ngpio  = S5P6440_GPIO_B_NR,
-                        .label  = "GPB",
-                },
-        }, {
-                .base   = S5P64X0_GPC_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6440_GPC(0),
-                        .ngpio  = S5P6440_GPIO_C_NR,
-                        .label  = "GPC",
-                },
-        }, {
-                .base   = S5P64X0_GPG_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6440_GPG(0),
-                        .ngpio  = S5P6440_GPIO_G_NR,
-                        .label  = "GPG",
-                },
-        },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_4bit2[] = {
-        {
-                .base   = S5P64X0_GPH_BASE + 0x4,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6440_GPH(0),
-                        .ngpio  = S5P6440_GPIO_H_NR,
-                        .label  = "GPH",
-                },
-        },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_rbank_4bit2[] = {
-        {
-                .base   = S5P64X0_GPR_BASE + 0x4,
-                .config = &s5p64x0_gpio_cfgs[2],
-                .chip   = {
-                        .base   = S5P6440_GPR(0),
-                        .ngpio  = S5P6440_GPIO_R_NR,
-                        .label  = "GPR",
-                },
-        },
-};
-
-static struct s3c_gpio_chip s5p6440_gpio_2bit[] = {
-        {
-                .base   = S5P64X0_GPF_BASE,
-                .config = &s5p64x0_gpio_cfgs[5],
-                .chip   = {
-                        .base   = S5P6440_GPF(0),
-                        .ngpio  = S5P6440_GPIO_F_NR,
-                        .label  = "GPF",
-                },
-        }, {
-                .base   = S5P64X0_GPI_BASE,
-                .config = &s5p64x0_gpio_cfgs[3],
-                .chip   = {
-                        .base   = S5P6440_GPI(0),
-                        .ngpio  = S5P6440_GPIO_I_NR,
-                        .label  = "GPI",
-                },
-        }, {
-                .base   = S5P64X0_GPJ_BASE,
-                .config = &s5p64x0_gpio_cfgs[3],
-                .chip   = {
-                        .base   = S5P6440_GPJ(0),
-                        .ngpio  = S5P6440_GPIO_J_NR,
-                        .label  = "GPJ",
-                },
-        }, {
-                .base   = S5P64X0_GPN_BASE,
-                .config = &s5p64x0_gpio_cfgs[4],
-                .chip   = {
-                        .base   = S5P6440_GPN(0),
-                        .ngpio  = S5P6440_GPIO_N_NR,
-                        .label  = "GPN",
-                },
-        }, {
-                .base   = S5P64X0_GPP_BASE,
-                .config = &s5p64x0_gpio_cfgs[5],
-                .chip   = {
-                        .base   = S5P6440_GPP(0),
-                        .ngpio  = S5P6440_GPIO_P_NR,
-                        .label  = "GPP",
-                },
-        },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit[] = {
-        {
-                .base   = S5P64X0_GPA_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6450_GPA(0),
-                        .ngpio  = S5P6450_GPIO_A_NR,
-                        .label  = "GPA",
-                },
-        }, {
-                .base   = S5P64X0_GPB_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6450_GPB(0),
-                        .ngpio  = S5P6450_GPIO_B_NR,
-                        .label  = "GPB",
-                },
-        }, {
-                .base   = S5P64X0_GPC_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6450_GPC(0),
-                        .ngpio  = S5P6450_GPIO_C_NR,
-                        .label  = "GPC",
-                },
-        }, {
-                .base   = S5P6450_GPD_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6450_GPD(0),
-                        .ngpio  = S5P6450_GPIO_D_NR,
-                        .label  = "GPD",
-                },
-        }, {
-                .base   = S5P6450_GPK_BASE,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6450_GPK(0),
-                        .ngpio  = S5P6450_GPIO_K_NR,
-                        .label  = "GPK",
-                },
-        },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_4bit2[] = {
-        {
-                .base   = S5P64X0_GPG_BASE + 0x4,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6450_GPG(0),
-                        .ngpio  = S5P6450_GPIO_G_NR,
-                        .label  = "GPG",
-                },
-        }, {
-                .base   = S5P64X0_GPH_BASE + 0x4,
-                .config = &s5p64x0_gpio_cfgs[1],
-                .chip   = {
-                        .base   = S5P6450_GPH(0),
-                        .ngpio  = S5P6450_GPIO_H_NR,
-                        .label  = "GPH",
-                },
-        },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_rbank_4bit2[] = {
-        {
-                .base   = S5P64X0_GPR_BASE + 0x4,
-                .config = &s5p64x0_gpio_cfgs[2],
-                .chip   = {
-                        .base   = S5P6450_GPR(0),
-                        .ngpio  = S5P6450_GPIO_R_NR,
-                        .label  = "GPR",
-                },
-        },
-};
-
-static struct s3c_gpio_chip s5p6450_gpio_2bit[] = {
-        {
-                .base   = S5P64X0_GPF_BASE,
-                .config = &s5p64x0_gpio_cfgs[5],
-                .chip   = {
-                        .base   = S5P6450_GPF(0),
-                        .ngpio  = S5P6450_GPIO_F_NR,
-                        .label  = "GPF",
-                },
-        }, {
-                .base   = S5P64X0_GPI_BASE,
-                .config = &s5p64x0_gpio_cfgs[3],
-                .chip   = {
-                        .base   = S5P6450_GPI(0),
-                        .ngpio  = S5P6450_GPIO_I_NR,
-                        .label  = "GPI",
-                },
-        }, {
-                .base   = S5P64X0_GPJ_BASE,
-                .config = &s5p64x0_gpio_cfgs[3],
-                .chip   = {
-                        .base   = S5P6450_GPJ(0),
-                        .ngpio  = S5P6450_GPIO_J_NR,
-                        .label  = "GPJ",
-                },
-        }, {
-                .base   = S5P64X0_GPN_BASE,
-                .config = &s5p64x0_gpio_cfgs[4],
-                .chip   = {
-                        .base   = S5P6450_GPN(0),
-                        .ngpio  = S5P6450_GPIO_N_NR,
-                        .label  = "GPN",
-                },
-        }, {
-                .base   = S5P64X0_GPP_BASE,
-                .config = &s5p64x0_gpio_cfgs[5],
-                .chip   = {
-                        .base   = S5P6450_GPP(0),
-                        .ngpio  = S5P6450_GPIO_P_NR,
-                        .label  = "GPP",
-                },
-        }, {
-                .base   = S5P6450_GPQ_BASE,
-                .config = &s5p64x0_gpio_cfgs[4],
-                .chip   = {
-                        .base   = S5P6450_GPQ(0),
-                        .ngpio  = S5P6450_GPIO_Q_NR,
-                        .label  = "GPQ",
-                },
-        }, {
-                .base   = S5P6450_GPS_BASE,
-                .config = &s5p64x0_gpio_cfgs[5],
-                .chip   = {
-                        .base   = S5P6450_GPS(0),
-                        .ngpio  = S5P6450_GPIO_S_NR,
-                        .label  = "GPS",
-                },
-        },
-};
-
-void __init s5p64x0_gpiolib_set_cfg(struct s3c_gpio_cfg *chipcfg, int nr_chips)
-{
-        for (; nr_chips > 0; nr_chips--, chipcfg++) {
-                if (!chipcfg->set_config)
-                        chipcfg->set_config     = s3c_gpio_setcfg_s3c64xx_4bit;
-                if (!chipcfg->get_config)
-                        chipcfg->get_config     = s3c_gpio_getcfg_s3c64xx_4bit;
-                if (!chipcfg->set_pull)
-                        chipcfg->set_pull       = s3c_gpio_setpull_updown;
-                if (!chipcfg->get_pull)
-                        chipcfg->get_pull       = s3c_gpio_getpull_updown;
-        }
-}
-
-static void __init s5p64x0_gpio_add_rbank_4bit2(struct s3c_gpio_chip *chip,
-                                                int nr_chips)
-{
-        for (; nr_chips > 0; nr_chips--, chip++) {
-                chip->chip.direction_input = s5p64x0_gpiolib_rbank_4bit2_input;
-                chip->chip.direction_output =
-                                        s5p64x0_gpiolib_rbank_4bit2_output;
-                s3c_gpiolib_add(chip);
-        }
-}
-
-static int __init s5p64x0_gpiolib_init(void)
-{
-        s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
-                                ARRAY_SIZE(s5p64x0_gpio_cfgs));
-
-        if (soc_is_s5p6450()) {
-                samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
-                                        ARRAY_SIZE(s5p6450_gpio_2bit));
-
-                samsung_gpiolib_add_4bit_chips(s5p6450_gpio_4bit,
-                                        ARRAY_SIZE(s5p6450_gpio_4bit));
-
-                samsung_gpiolib_add_4bit2_chips(s5p6450_gpio_4bit2,
-                                        ARRAY_SIZE(s5p6450_gpio_4bit2));
-
-                s5p64x0_gpio_add_rbank_4bit2(s5p6450_gpio_rbank_4bit2,
-                                        ARRAY_SIZE(s5p6450_gpio_rbank_4bit2));
-        } else {
-                samsung_gpiolib_add_2bit_chips(s5p6440_gpio_2bit,
-                                        ARRAY_SIZE(s5p6440_gpio_2bit));
-
-                samsung_gpiolib_add_4bit_chips(s5p6440_gpio_4bit,
-                                        ARRAY_SIZE(s5p6440_gpio_4bit));
-
-                samsung_gpiolib_add_4bit2_chips(s5p6440_gpio_4bit2,
-                                        ARRAY_SIZE(s5p6440_gpio_4bit2));
-
-                s5p64x0_gpio_add_rbank_4bit2(s5p6440_gpio_rbank_4bit2,
-                                        ARRAY_SIZE(s5p6440_gpio_rbank_4bit2));
-        }
-
-        return 0;
-}
-core_initcall(s5p64x0_gpiolib_init);
diff --git a/arch/arm/mach-s5p64x0/include/mach/i2c.h b/arch/arm/mach-s5p64x0/i2c.h
index 887d25209e8e..1e5bb4ea200d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/i2c.h
+++ b/arch/arm/mach-s5p64x0/i2c.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/i2c.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *              http://www.samsung.com
  *
diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
index 4aaebdace55f..d60397d1ff40 100644
--- a/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5p64x0/include/mach/regs-irq.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/vic.h>
 #include <mach/map.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/tick.h b/arch/arm/mach-s5p64x0/include/mach/tick.h
deleted file mode 100644
index 00aa7f1d8e51..000000000000
--- a/arch/arm/mach-s5p64x0/include/mach/tick.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/tick.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S5P64X0 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-        u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-        return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX        (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5p64x0/include/mach/uncompress.h b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
index 1608faf870ff..19e0d64d78c5 100644
--- a/arch/arm/mach-s5p64x0/include/mach/uncompress.h
+++ b/arch/arm/mach-s5p64x0/include/mach/uncompress.h
@@ -116,33 +116,6 @@ static inline void flush(void)
                 *((volatile unsigned int __force *)(ad)) = (d); \
         } while (0)
 
-/*
- * CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
- */
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-        __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-        __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-        __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-        __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
 
 #ifdef CONFIG_S3C_BOOT_ERROR_RESET
 
@@ -192,7 +165,6 @@ static void arch_decomp_setup(void)
          */
 
         arch_detect_cpu();
-        arch_decomp_wdog_start();
 
         /*
          * Enable the UART FIFOs if they where not enabled and our
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 1af823558c60..e23723a5a214 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -29,7 +29,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -38,7 +37,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/i2c.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/regs-serial.h>
@@ -56,6 +54,7 @@
 #include <plat/sdhci.h>
 
 #include "common.h"
+#include "i2c.h"
 
 #define SMDK6440_UCON_DEFAULT   (S3C2410_UCON_TXILEVEL |        \
                                 S3C2410_UCON_RXILEVEL |         \
@@ -272,9 +271,8 @@ MACHINE_START(SMDK6440, "SMDK6440")
         .atag_offset    = 0x100,
 
         .init_irq       = s5p6440_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6440_map_io,
         .init_machine   = smdk6440_machine_init,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .restart        = s5p64x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 62526ccf6b70..ca10963a959e 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -29,7 +29,6 @@
 #include <video/platform_lcd.h>
 #include <video/samsung_fimd.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/irq.h>
@@ -38,7 +37,6 @@
 #include <mach/hardware.h>
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/i2c.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/regs-serial.h>
@@ -56,6 +54,7 @@
 #include <plat/sdhci.h>
 
 #include "common.h"
+#include "i2c.h"
 
 #define SMDK6450_UCON_DEFAULT   (S3C2410_UCON_TXILEVEL |        \
                                 S3C2410_UCON_RXILEVEL |         \
@@ -291,9 +290,8 @@ MACHINE_START(SMDK6450, "SMDK6450")
         .atag_offset    = 0x100,
 
         .init_irq       = s5p6450_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smdk6450_map_io,
         .init_machine   = smdk6450_machine_init,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .restart        = s5p64x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5p64x0/setup-i2c0.c b/arch/arm/mach-s5p64x0/setup-i2c0.c
index a32edc545e6c..569b76ac98cb 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c0.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c0.c
@@ -21,7 +21,7 @@ struct platform_device; /* don't need the contents */
 #include <plat/gpio-cfg.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <mach/i2c.h>
+#include "i2c.h"
 
 void s5p6440_i2c0_cfg_gpio(struct platform_device *dev)
 {
diff --git a/arch/arm/mach-s5p64x0/setup-i2c1.c b/arch/arm/mach-s5p64x0/setup-i2c1.c
index ca2c5c7f8aa6..867374e6d0bc 100644
--- a/arch/arm/mach-s5p64x0/setup-i2c1.c
+++ b/arch/arm/mach-s5p64x0/setup-i2c1.c
@@ -21,7 +21,7 @@ struct platform_device; /* don't need the contents */
 #include <plat/gpio-cfg.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <mach/i2c.h>
+#include "i2c.h"
 
 void s5p6440_i2c1_cfg_gpio(struct platform_device *dev)
 {
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-irq.h b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
index 4d9036d0f288..761627897f30 100644
--- a/arch/arm/mach-s5pc100/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pc100/include/mach/regs-irq.h
@@ -14,6 +14,5 @@
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
 #include <mach/map.h>
-#include <asm/hardware/vic.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/tick.h b/arch/arm/mach-s5pc100/include/mach/tick.h
index 20f68730ed18..0af8e41230ed 100644
--- a/arch/arm/mach-s5pc100/include/mach/tick.h
+++ b/arch/arm/mach-s5pc100/include/mach/tick.h
@@ -15,6 +15,8 @@
 #ifndef __ASM_ARCH_TICK_H
 #define __ASM_ARCH_TICK_H __FILE__
 
+#include <linux/irqchip/arm-vic.h>
+
 /* note, the timer interrutps turn up in 2 places, the vic and then
  * the timer block. We take the VIC as the base at the moment.
  */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 9abe95e806ab..185a19583898 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -25,7 +25,6 @@
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -254,9 +253,8 @@ MACHINE_START(SMDKC100, "SMDKC100")
         /* Maintainer: Byungho Min <bhmin@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pc100_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smdkc100_map_io,
         .init_machine   = smdkc100_machine_init,
-        .timer          = &s3c24xx_timer,
+        .init_time      = s3c24xx_timer_init,
         .restart        = s5pc100_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c
index addfb165c13d..2d67361ef431 100644
--- a/arch/arm/mach-s5pv210/dev-audio.c
+++ b/arch/arm/mach-s5pv210/dev-audio.c
@@ -18,7 +18,8 @@
 #include <mach/map.h>
 #include <mach/dma.h>
 #include <mach/irqs.h>
-#include <mach/regs-audss.h>
+
+#define S5PV210_AUDSS_INT_MEM   (0xC0000000)
 
 static int s5pv210_cfg_i2s(struct platform_device *pdev)
 {
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h
deleted file mode 100644
index eacc1f790807..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-audss.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-audss.h
- *
- * Copyright (c) 2011 Samsung Electronics
- *              http://www.samsung.com
- *
- * S5PV210 Audio SubSystem clock register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __PLAT_REGS_AUDSS_H
-#define __PLAT_REGS_AUDSS_H __FILE__
-
-#define S5PV210_AUDSS_INT_MEM   (0xC0000000)
-
-#endif /* _PLAT_REGS_AUDSS_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-irq.h b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
index 5c3b104a7c86..d8bc1e6c7aaa 100644
--- a/arch/arm/mach-s5pv210/include/mach/regs-irq.h
+++ b/arch/arm/mach-s5pv210/include/mach/regs-irq.h
@@ -13,7 +13,6 @@
 #ifndef __ASM_ARCH_REGS_IRQ_H
 #define __ASM_ARCH_REGS_IRQ_H __FILE__
 
-#include <asm/hardware/vic.h>
 #include <mach/map.h>
 
 #endif /* __ASM_ARCH_REGS_IRQ_H */
diff --git a/arch/arm/mach-s5pv210/include/mach/regs-sys.h b/arch/arm/mach-s5pv210/include/mach/regs-sys.h
deleted file mode 100644
index cccb1eddaa38..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/regs-sys.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/* arch/arm/mach-s5pv210/include/mach/regs-sys.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com/
- *
- * S5PV210 - System registers definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#define S5PV210_USB_PHY_CON     (S3C_VA_SYS + 0xE80C)
-#define S5PV210_USB_PHY0_EN     (1 << 0)
-#define S5PV210_USB_PHY1_EN     (1 << 1)
diff --git a/arch/arm/mach-s5pv210/include/mach/tick.h b/arch/arm/mach-s5pv210/include/mach/tick.h
deleted file mode 100644
index 7993b3603ccf..000000000000
--- a/arch/arm/mach-s5pv210/include/mach/tick.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/include/mach/tick.h
- *
- * Copyright (c) 2009 Samsung Electronics Co., Ltd.
- *              http://www.samsung.com/
- *
- * Based on arch/arm/mach-s3c6400/include/mach/tick.h
- *
- * S5PV210 - Timer tick support definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_TICK_H
-#define __ASM_ARCH_TICK_H __FILE__
-
-static inline u32 s3c24xx_ostimer_pending(void)
-{
-        u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS);
-        return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0)));
-}
-
-#define TICK_MAX        (0xffffffff)
-
-#endif /* __ASM_ARCH_TICK_H */
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index ee9fa5c2ef2c..11900a8e88a3 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/gpio.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -685,9 +684,8 @@ MACHINE_START(AQUILA, "Aquila")
            Kyungmin Park <kyungmin.park@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = aquila_map_io,
         .init_machine   = aquila_machine_init,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .restart        = s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index c72b31078c99..570481591746 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -29,7 +29,6 @@
 #include <linux/interrupt.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -972,10 +971,9 @@ MACHINE_START(GONI, "GONI")
         /* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = goni_map_io,
         .init_machine   = goni_machine_init,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .reserve        = &goni_reserve,
         .restart        = s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f1f3bd37ecda..28bd0248a3e2 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -15,7 +15,6 @@
 #include <linux/i2c.h>
 #include <linux/device.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -152,10 +151,9 @@ MACHINE_START(SMDKC110, "SMDKC110")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smdkc110_map_io,
         .init_machine   = smdkc110_machine_init,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .restart        = s5pv210_restart,
         .reserve        = &smdkc110_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 6bc8404bf678..3c73f36869bb 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -21,7 +21,6 @@
 #include <linux/pwm_backlight.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -328,10 +327,9 @@ MACHINE_START(SMDKV210, "SMDKV210")
         /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = smdkv210_map_io,
         .init_machine   = smdkv210_machine_init,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .restart        = s5pv210_restart,
         .reserve        = &smdkv210_reserve,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 18785cb5e1ef..2d4c5531819c 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -14,7 +14,6 @@
 #include <linux/init.h>
 #include <linux/serial_core.h>
 
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/setup.h>
@@ -129,9 +128,8 @@ MACHINE_START(TORBRECK, "TORBRECK")
         /* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
         .atag_offset    = 0x100,
         .init_irq       = s5pv210_init_irq,
-        .handle_irq     = vic_handle_irq,
         .map_io         = torbreck_map_io,
         .init_machine   = torbreck_machine_init,
-        .timer          = &s5p_timer,
+        .init_time      = s5p_timer_init,
         .restart        = s5pv210_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s5pv210/setup-usb-phy.c b/arch/arm/mach-s5pv210/setup-usb-phy.c
index be39cf4aa91b..356a0900af03 100644
--- a/arch/arm/mach-s5pv210/setup-usb-phy.c
+++ b/arch/arm/mach-s5pv210/setup-usb-phy.c
@@ -12,12 +12,17 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+
 #include <mach/map.h>
-#include <mach/regs-sys.h>
+
 #include <plat/cpu.h>
 #include <plat/regs-usb-hsotg-phy.h>
 #include <plat/usb-phy.h>
 
+#define S5PV210_USB_PHY_CON     (S3C_VA_SYS + 0xE80C)
+#define S5PV210_USB_PHY0_EN     (1 << 0)
+#define S5PV210_USB_PHY1_EN     (1 << 1)
+
 static int s5pv210_usb_otgphy_init(struct platform_device *pdev)
 {
         struct clk *xusbxti;
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 442497363db9..e838ba27e443 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -622,7 +622,7 @@ MACHINE_START(ASSABET, "Intel-Assabet")
         .map_io         = assabet_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = assabet_init,
         .init_late      = sa11x0_init_late,
 #ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b2dadf3ea3df..63361b6d04e9 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -336,7 +336,7 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
         .init_late      = sa11x0_init_late,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
 #ifdef CONFIG_SA1111
         .dma_zone_size  = SZ_1M,
 #endif
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 304bca4a07c0..2d25ececb415 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -174,7 +174,7 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
         .map_io         = cerf_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = cerf_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = cerf_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 45f424f5fca6..612a45689770 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -399,7 +399,7 @@ MACHINE_START(COLLIE, "Sharp-Collie")
         .map_io         = collie_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = collie_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index a5b7c13da3e3..2abc6a1f6e86 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -4,9 +4,7 @@
  * Author: Nicolas Pitre
  */
 
-struct sys_timer;
-
-extern struct sys_timer sa1100_timer;
+extern void sa1100_timer_init(void);
 extern void __init sa1100_map_io(void);
 extern void __init sa1100_init_irq(void);
 extern void __init sa1100_init_gpio(void);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index e1571eab08ae..b8f2b151539b 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -108,7 +108,7 @@ MACHINE_START(H3100, "Compaq iPAQ H3100")
         .map_io         = h3100_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = h3100_mach_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index ba7a2901ab88..b8dc5bd22623 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -158,7 +158,7 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
         .map_io         = h3600_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = h3600_mach_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index d005939c41fc..643d5f2d9af9 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -229,7 +229,7 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board")
         .map_io         = hackkit_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = hackkit_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/include/mach/uncompress.h b/arch/arm/mach-sa1100/include/mach/uncompress.h
index 5cf71da60e42..73093dc89829 100644
--- a/arch/arm/mach-sa1100/include/mach/uncompress.h
+++ b/arch/arm/mach-sa1100/include/mach/uncompress.h
@@ -49,4 +49,3 @@ static inline void flush(void)
  * Nothing to do for these
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 35cfc428b4d4..c0b1f5bafae4 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -346,7 +346,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
         .map_io         = jornada720_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = jornada720_mach_init,
         .init_late      = sa11x0_init_late,
 #ifdef CONFIG_SA1111
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index bca7e60b24d3..51b0eb52c014 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -171,6 +171,6 @@ MACHINE_START(LART, "LART")
         .init_irq       = sa1100_init_irq,
         .init_machine   = lart_init,
         .init_late      = sa11x0_init_late,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .restart        = sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 102e08f7b109..f1cb3784d525 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -110,7 +110,7 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine")
         .map_io         = nanoengine_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = nanoengine_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index c51bb63f90fb..091261878eff 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -133,7 +133,7 @@ MACHINE_START(PLEB, "PLEB")
         .map_io         = pleb_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = pleb_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 6460d25fbb88..c8866bce7386 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -102,7 +102,7 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
         .map_io         = shannon_map_io,
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .init_machine   = shannon_init,
         .init_late      = sa11x0_init_late,
         .restart        = sa11x0_restart,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 6d65f65fcb23..bcbc94540e45 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,6 +396,6 @@ MACHINE_START(SIMPAD, "Simpad")
         .nr_irqs        = SA1100_NR_IRQS,
         .init_irq       = sa1100_init_irq,
         .init_late      = sa11x0_init_late,
-        .timer          = &sa1100_timer,
+        .init_time      = sa1100_timer_init,
         .restart        = sa11x0_restart,
 MACHINE_END
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 80702c9ecc77..a59a13a665a6 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -69,46 +69,10 @@ sa1100_osmr0_set_mode(enum clock_event_mode mode, struct clock_event_device *c)
         }
 }
 
-static struct clock_event_device ckevt_sa1100_osmr0 = {
-        .name           = "osmr0",
-        .features       = CLOCK_EVT_FEAT_ONESHOT,
-        .rating         = 200,
-        .set_next_event = sa1100_osmr0_set_next_event,
-        .set_mode       = sa1100_osmr0_set_mode,
-};
-
-static struct irqaction sa1100_timer_irq = {
-        .name           = "ost0",
-        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-        .handler        = sa1100_ost0_interrupt,
-        .dev_id         = &ckevt_sa1100_osmr0,
-};
-
-static void __init sa1100_timer_init(void)
-{
-        writel_relaxed(0, OIER);
-        writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
-
-        setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
-
-        clockevents_calc_mult_shift(&ckevt_sa1100_osmr0, 3686400, 4);
-        ckevt_sa1100_osmr0.max_delta_ns =
-                clockevent_delta2ns(0x7fffffff, &ckevt_sa1100_osmr0);
-        ckevt_sa1100_osmr0.min_delta_ns =
-                clockevent_delta2ns(MIN_OSCR_DELTA * 2, &ckevt_sa1100_osmr0) + 1;
-        ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
-
-        setup_irq(IRQ_OST0, &sa1100_timer_irq);
-
-        clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
-                clocksource_mmio_readl_up);
-        clockevents_register_device(&ckevt_sa1100_osmr0);
-}
-
 #ifdef CONFIG_PM
 unsigned long osmr[4], oier;
 
-static void sa1100_timer_suspend(void)
+static void sa1100_timer_suspend(struct clock_event_device *cedev)
 {
         osmr[0] = readl_relaxed(OSMR0);
         osmr[1] = readl_relaxed(OSMR1);
@@ -117,7 +81,7 @@ static void sa1100_timer_suspend(void)
         oier = readl_relaxed(OIER);
 }
 
-static void sa1100_timer_resume(void)
+static void sa1100_timer_resume(struct clock_event_device *cedev)
 {
         writel_relaxed(0x0f, OSSR);
         writel_relaxed(osmr[0], OSMR0);
@@ -136,8 +100,36 @@ static void sa1100_timer_resume(void)
 #define sa1100_timer_resume NULL
 #endif
 
-struct sys_timer sa1100_timer = {
-        .init           = sa1100_timer_init,
+static struct clock_event_device ckevt_sa1100_osmr0 = {
+        .name           = "osmr0",
+        .features       = CLOCK_EVT_FEAT_ONESHOT,
+        .rating         = 200,
+        .set_next_event = sa1100_osmr0_set_next_event,
+        .set_mode       = sa1100_osmr0_set_mode,
         .suspend        = sa1100_timer_suspend,
         .resume         = sa1100_timer_resume,
 };
+
+static struct irqaction sa1100_timer_irq = {
+        .name           = "ost0",
+        .flags          = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+        .handler        = sa1100_ost0_interrupt,
+        .dev_id         = &ckevt_sa1100_osmr0,
+};
+
+void __init sa1100_timer_init(void)
+{
+        writel_relaxed(0, OIER);
+        writel_relaxed(OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3, OSSR);
+
+        setup_sched_clock(sa1100_read_sched_clock, 32, 3686400);
+
+        ckevt_sa1100_osmr0.cpumask = cpumask_of(0);
+
+        setup_irq(IRQ_OST0, &sa1100_timer_irq);
+
+        clocksource_mmio_init(OSCR, "oscr", CLOCK_TICK_RATE, 200, 32,
+                clocksource_mmio_readl_up);
+        clockevents_config_and_register(&ckevt_sa1100_osmr0, 3686400,
+                                        MIN_OSCR_DELTA * 2, 0x7fffffff);
+}
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 9ad2e9737fb5..b63dec848195 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -128,10 +128,6 @@ static void __init shark_timer_init(void)
         setup_irq(IRQ_TIMER, &shark_timer_irq);
 }
 
-static struct sys_timer shark_timer = {
-        .init           = shark_timer_init,
-};
-
 static void shark_init_early(void)
 {
         disable_hlt();
@@ -142,7 +138,7 @@ MACHINE_START(SHARK, "Shark")
         .atag_offset    = 0x3000,
         .init_early     = shark_init_early,
         .init_irq       = shark_init_irq,
-        .timer          = &shark_timer,
+        .init_time      = shark_timer_init,
         .dma_zone_size  = SZ_4M,
         .restart        = shark_restart,
 MACHINE_END
diff --git a/arch/arm/mach-shark/include/mach/uncompress.h b/arch/arm/mach-shark/include/mach/uncompress.h
index 22ccab4c3c5e..a168435aecc9 100644
--- a/arch/arm/mach-shark/include/mach/uncompress.h
+++ b/arch/arm/mach-shark/include/mach/uncompress.h
@@ -48,4 +48,3 @@ static void putr()
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 032d10817e79..705bc63c7984 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -40,6 +40,7 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
+#include <linux/irqchip/arm-gic.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -49,7 +50,6 @@
 #include <mach/common.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
@@ -668,8 +668,7 @@ MACHINE_START(AG5EVM, "ag5evm")
         .init_early     = sh73a0_add_early_devices,
         .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = sh73a0_init_irq,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = ag5evm_init,
         .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = sh73a0_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 08294fa9e0d4..2928cd686808 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -1344,5 +1344,5 @@ MACHINE_START(AP4EVB, "ap4evb")
         .handle_irq     = shmobile_handle_irq_intc,
         .init_machine   = ap4evb_init,
         .init_late      = sh7372_pm_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = sh7372_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index 0679ca6bf1f6..6bcf3cbd9223 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -1192,9 +1192,6 @@ static void __init eva_earlytimer_init(void)
 static void __init eva_add_early_devices(void)
 {
         r8a7740_add_early_devices();
-
-        /* override timer setup with board-specific code */
-        shmobile_timer.init = eva_earlytimer_init;
 }
 
 #define RESCNT2 IOMEM(0xe6188020)
@@ -1216,7 +1213,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
         .handle_irq     = shmobile_handle_irq_intc,
         .init_machine   = eva_init,
         .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = eva_earlytimer_init,
         .dt_compat      = eva_boards_compat_dt,
         .restart        = eva_restart,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-bonito.c b/arch/arm/mach-shmobile/board-bonito.c
index cb8c994e1430..331b7ce4edd8 100644
--- a/arch/arm/mach-shmobile/board-bonito.c
+++ b/arch/arm/mach-shmobile/board-bonito.c
@@ -499,9 +499,6 @@ static void __init bonito_earlytimer_init(void)
 static void __init bonito_add_early_devices(void)
 {
         r8a7740_add_early_devices();
-
-        /* override timer setup with board-specific code */
-        shmobile_timer.init = bonito_earlytimer_init;
 }
 
 MACHINE_START(BONITO, "bonito")
@@ -511,5 +508,5 @@ MACHINE_START(BONITO, "bonito")
         .handle_irq     = shmobile_handle_irq_intc,
         .init_machine   = bonito_init,
         .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = bonito_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index bf88f9a8b7ac..d759a9c2b9e8 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -35,6 +35,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/leds-renesas-tpu.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
@@ -47,7 +48,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/traps.h>
 
@@ -550,8 +550,7 @@ MACHINE_START(KOTA2, "kota2")
         .init_early     = sh73a0_add_early_devices,
         .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = sh73a0_init_irq,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = kota2_init,
         .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = sh73a0_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index b52bc0d1273f..c254782aa727 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -28,7 +28,6 @@
 #include <mach/emev2.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 /* Dummy supplies, where voltage doesn't matter */
 static struct regulator_consumer_supply dummy_supplies[] = {
@@ -89,9 +88,8 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d")
         .init_early     = emev2_add_early_devices,
         .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = emev2_init_irq,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = kzm9d_add_standard_devices,
         .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = shmobile_timer_init,
         .dt_compat      = kzm9d_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
index f41b71e8df3e..5394d804a716 100644
--- a/arch/arm/mach-shmobile/board-kzm9g.c
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -25,6 +25,7 @@
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/input.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mmc/sh_mobile_sdhi.h>
@@ -42,7 +43,6 @@
 #include <mach/sh73a0.h>
 #include <mach/common.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <video/sh_mobile_lcdc.h>
@@ -792,10 +792,9 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g")
         .init_early     = sh73a0_add_early_devices,
         .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = sh73a0_init_irq,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = kzm_init,
         .init_late      = shmobile_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = sh73a0_earlytimer_init,
         .restart        = kzm9g_restart,
         .dt_compat      = kzm9g_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 3fd716dae405..e2fafca9432b 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -1589,6 +1589,6 @@ DT_MACHINE_START(MACKEREL_DT, "mackerel")
         .handle_irq     = shmobile_handle_irq_intc,
         .init_machine   = mackerel_init,
         .init_late      = sh7372_pm_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = sh7372_earlytimer_init,
         .dt_compat  = mackerel_boards_compat_dt,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c
index 449f9289567d..cdcb799e802f 100644
--- a/arch/arm/mach-shmobile/board-marzen.c
+++ b/arch/arm/mach-shmobile/board-marzen.c
@@ -44,7 +44,6 @@
 #include <mach/irqs.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 #include <asm/traps.h>
 
 /* Fixed 3.3V regulator to be used by SDHI0 */
@@ -382,8 +381,7 @@ MACHINE_START(MARZEN, "marzen")
         .init_early     = r8a7779_add_early_devices,
         .nr_irqs        = NR_IRQS_LEGACY,
         .init_irq       = r8a7779_init_irq,
-        .handle_irq     = gic_handle_irq,
         .init_machine   = marzen_init,
         .init_late      = marzen_init_late,
-        .timer          = &shmobile_timer,
+        .init_time      = r8a7779_earlytimer_init,
 MACHINE_END
diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h
index dfeca79e9e96..a57439eec11a 100644
--- a/arch/arm/mach-shmobile/include/mach/common.h
+++ b/arch/arm/mach-shmobile/include/mach/common.h
@@ -2,7 +2,7 @@
 #define __ARCH_MACH_COMMON_H
 
 extern void shmobile_earlytimer_init(void);
-extern struct sys_timer shmobile_timer;
+extern void shmobile_timer_init(void);
 extern void shmobile_setup_delay(unsigned int max_cpu_core_mhz,
                          unsigned int mult, unsigned int div);
 struct twd_local_timer;
@@ -20,6 +20,7 @@ extern void shmobile_cpuidle_set_driver(struct cpuidle_driver *drv);
 
 extern void sh7372_init_irq(void);
 extern void sh7372_map_io(void);
+extern void sh7372_earlytimer_init(void);
 extern void sh7372_add_early_devices(void);
 extern void sh7372_add_standard_devices(void);
 extern void sh7372_clock_init(void);
@@ -32,6 +33,7 @@ extern struct clk sh7372_extal2_clk;
 
 extern void sh73a0_init_irq(void);
 extern void sh73a0_map_io(void);
+extern void sh73a0_earlytimer_init(void);
 extern void sh73a0_add_early_devices(void);
 extern void sh73a0_add_standard_devices(void);
 extern void sh73a0_clock_init(void);
@@ -50,6 +52,7 @@ extern void r8a7740_pinmux_init(void);
 
 extern void r8a7779_init_irq(void);
 extern void r8a7779_map_io(void);
+extern void r8a7779_earlytimer_init(void);
 extern void r8a7779_add_early_devices(void);
 extern void r8a7779_add_standard_devices(void);
 extern void r8a7779_clock_init(void);
diff --git a/arch/arm/mach-shmobile/include/mach/uncompress.h b/arch/arm/mach-shmobile/include/mach/uncompress.h
index 0bd7556b1387..f1aee56781e7 100644
--- a/arch/arm/mach-shmobile/include/mach/uncompress.h
+++ b/arch/arm/mach-shmobile/include/mach/uncompress.h
@@ -16,6 +16,4 @@ static void arch_decomp_setup(void)
 {
 }
 
-#define arch_decomp_wdog()
-
 #endif /* __ASM_MACH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c
index ef66f1a8aa2e..8807c27f71f9 100644
--- a/arch/arm/mach-shmobile/intc-r8a7779.c
+++ b/arch/arm/mach-shmobile/intc-r8a7779.c
@@ -22,10 +22,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <mach/intc.h>
 #include <mach/r8a7779.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index f0c5e5190601..978369973be4 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -23,10 +23,10 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/intc.h>
 #include <mach/irqs.h>
 #include <mach/sh73a0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index ed8d2351915e..1f958d7b0bac 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -12,7 +12,6 @@
  */
 #include <linux/init.h>
 #include <linux/smp.h>
-#include <asm/hardware/gic.h>
 
 void __init shmobile_smp_init_cpus(unsigned int ncores)
 {
@@ -26,6 +25,4 @@ void __init shmobile_smp_init_cpus(unsigned int ncores)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index a47beeb18283..47662a581c0a 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,13 +20,14 @@
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/gpio-em.h>
 #include <linux/of_platform.h>
 #include <linux/delay.h>
 #include <linux/input.h>
 #include <linux/io.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
 
 static struct map_desc emev2_io_desc[] __initdata = {
 #ifdef CONFIG_SMP
@@ -445,29 +445,18 @@ void __init emev2_add_standard_devices_dt(void)
                              emev2_auxdata_lookup, NULL);
 }
 
-static const struct of_device_id emev2_dt_irq_match[] = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        {},
-};
-
 static const char *emev2_boards_compat_dt[] __initdata = {
         "renesas,emev2",
         NULL,
 };
 
-void __init emev2_init_irq_dt(void)
-{
-        of_irq_init(emev2_dt_irq_match);
-}
-
 DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
         .smp            = smp_ops(emev2_smp_ops),
         .init_early     = emev2_init_delay,
         .nr_irqs        = NR_IRQS_LEGACY,
-        .init_irq       = emev2_init_irq_dt,
-        .handle_irq     = gic_handle_irq,
+        .init_irq       = irqchip_init,
         .init_machine   = emev2_add_standard_devices_dt,
-        .timer          = &shmobile_timer,
+        .init_time      = shmobile_timer_init,
         .dt_compat      = emev2_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 095222469d03..03c69f9979aa 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -705,12 +705,6 @@ void __init r8a7740_add_standard_devices(void)
         rmobile_add_device_to_domain("A3SP",    &i2c1_device);
 }
 
-static void __init r8a7740_earlytimer_init(void)
-{
-        r8a7740_clock_init(0);
-        shmobile_earlytimer_init();
-}
-
 void __init r8a7740_add_early_devices(void)
 {
         early_platform_add_devices(r8a7740_early_devices,
@@ -718,9 +712,6 @@ void __init r8a7740_add_early_devices(void)
 
         /* setup early console here as well */
         shmobile_setup_console();
-
-        /* override timer setup with soc-specific code */
-        shmobile_timer.init = r8a7740_earlytimer_init;
 }
 
 #ifdef CONFIG_USE_OF
@@ -763,7 +754,7 @@ DT_MACHINE_START(R8A7740_DT, "Generic R8A7740 (Flattened Device Tree)")
         .init_irq       = r8a7740_init_irq,
         .handle_irq     = shmobile_handle_irq_intc,
         .init_machine   = r8a7740_add_standard_devices_dt,
-        .timer          = &shmobile_timer,
+        .init_time      = shmobile_timer_init,
         .dt_compat      = r8a7740_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 7a1ad4f38539..a181ced09e45 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -339,7 +339,7 @@ void __init r8a7779_add_standard_devices(void)
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
 void __init __weak r8a7779_register_twd(void) { }
 
-static void __init r8a7779_earlytimer_init(void)
+void __init r8a7779_earlytimer_init(void)
 {
         r8a7779_clock_init();
         shmobile_earlytimer_init();
@@ -366,7 +366,4 @@ void __init r8a7779_add_early_devices(void)
          * As a final step pass earlyprint=sh-sci.2,115200 on the kernel
          * command line in case of the marzen board.
          */
-
-        /* override timer setup with soc-specific code */
-        shmobile_timer.init = r8a7779_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index c917882424a7..191ae72e21ba 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1054,7 +1054,7 @@ void __init sh7372_add_standard_devices(void)
                                        ARRAY_SIZE(domain_devices));
 }
 
-static void __init sh7372_earlytimer_init(void)
+void __init sh7372_earlytimer_init(void)
 {
         sh7372_clock_init();
         shmobile_earlytimer_init();
@@ -1067,9 +1067,6 @@ void __init sh7372_add_early_devices(void)
 
         /* setup early console here as well */
         shmobile_setup_console();
-
-        /* override timer setup with soc-specific code */
-        shmobile_timer.init = sh7372_earlytimer_init;
 }
 
 #ifdef CONFIG_USE_OF
@@ -1113,7 +1110,7 @@ DT_MACHINE_START(SH7372_DT, "Generic SH7372 (Flattened Device Tree)")
         .init_irq       = sh7372_init_irq,
         .handle_irq     = shmobile_handle_irq_intc,
         .init_machine   = sh7372_add_standard_devices_dt,
-        .timer          = &shmobile_timer,
+        .init_time      = shmobile_timer_init,
         .dt_compat      = sh7372_boards_compat_dt,
 MACHINE_END
 
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index db99a4ade80c..8c2d6424f470 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -796,7 +796,7 @@ void __init sh73a0_add_standard_devices(void)
 /* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
 void __init __weak sh73a0_register_twd(void) { }
 
-static void __init sh73a0_earlytimer_init(void)
+void __init sh73a0_earlytimer_init(void)
 {
         sh73a0_clock_init();
         shmobile_earlytimer_init();
@@ -810,7 +810,4 @@ void __init sh73a0_add_early_devices(void)
 
         /* setup early console here as well */
         shmobile_setup_console();
-
-        /* override timer setup with soc-specific code */
-        shmobile_timer.init = sh73a0_earlytimer_init;
 }
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index f67456286280..953eb1f9388d 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -23,11 +23,11 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <mach/emev2.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 #include <asm/cacheflush.h>
 
 #define EMEV2_SCU_BASE 0x1e000000
@@ -100,7 +100,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct *
         /* Tell ROM loader about our vector (in headsmp.S) */
         emev2_set_boot_vector(__pa(shmobile_secondary_vector));
 
-        gic_raise_softirq(cpumask_of(cpu), 0);
+        arch_send_wakeup_ipi_mask(cpumask_of(cpu));
         return 0;
 }
 
diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c
index 2ce6af9a6a37..3a4acf23edcf 100644
--- a/arch/arm/mach-shmobile/smp-r8a7779.c
+++ b/arch/arm/mach-shmobile/smp-r8a7779.c
@@ -23,12 +23,12 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <mach/r8a7779.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
 
 #define AVECR IOMEM(0xfe700040)
 
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 624f00f70abf..5c5bcb595350 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -23,12 +23,12 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/delay.h>
+#include <linux/irqchip/arm-gic.h>
 #include <mach/common.h>
 #include <asm/smp_plat.h>
 #include <mach/sh73a0.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
-#include <asm/hardware/gic.h>
 
 #define WUPCR           IOMEM(0xe6151010)
 #define SRESCR          IOMEM(0xe6151018)
diff --git a/arch/arm/mach-shmobile/timer.c b/arch/arm/mach-shmobile/timer.c
index a68919727e24..fdbe54a11555 100644
--- a/arch/arm/mach-shmobile/timer.c
+++ b/arch/arm/mach-shmobile/timer.c
@@ -60,10 +60,6 @@ void __init shmobile_earlytimer_init(void)
         late_time_init = shmobile_late_time_init;
 }
 
-static void __init shmobile_timer_init(void)
+void __init shmobile_timer_init(void)
 {
 }
-
-struct sys_timer shmobile_timer = {
-        .init           = shmobile_timer_init,
-};
diff --git a/arch/arm/mach-socfpga/platsmp.c b/arch/arm/mach-socfpga/platsmp.c
index 68dd1b69512a..4e9e69d9e7de 100644
--- a/arch/arm/mach-socfpga/platsmp.c
+++ b/arch/arm/mach-socfpga/platsmp.c
@@ -22,9 +22,9 @@
 #include <linux/io.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_plat.h>
 
@@ -83,8 +83,6 @@ static void __init socfpga_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init socfpga_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-socfpga/socfpga.c b/arch/arm/mach-socfpga/socfpga.c
index 6732924a5fee..27d68468a027 100644
--- a/arch/arm/mach-socfpga/socfpga.c
+++ b/arch/arm/mach-socfpga/socfpga.c
@@ -15,12 +15,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/dw_apb_timer.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
@@ -62,11 +62,6 @@ static void __init socfpga_map_io(void)
         early_printk("Early printk initialized\n");
 }
 
-const static struct of_device_id irq_match[] = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        {}
-};
-
 void __init socfpga_sysmgr_init(void)
 {
         struct device_node *np;
@@ -78,9 +73,9 @@ void __init socfpga_sysmgr_init(void)
         rst_manager_base_addr = of_iomap(np, 0);
 }
 
-static void __init gic_init_irq(void)
+static void __init socfpga_init_irq(void)
 {
-        of_irq_init(irq_match);
+        irqchip_init();
         socfpga_sysmgr_init();
 }
 
@@ -105,9 +100,8 @@ static const char *altera_dt_match[] = {
 DT_MACHINE_START(SOCFPGA, "Altera SOCFPGA")
         .smp            = smp_ops(socfpga_smp_ops),
         .map_io         = socfpga_map_io,
-        .init_irq       = gic_init_irq,
-        .handle_irq     = gic_handle_irq,
-        .timer          = &dw_apb_timer,
+        .init_irq       = socfpga_init_irq,
+        .init_time      = dw_apb_timer_init,
         .init_machine   = socfpga_cyclone5_init,
         .restart        = socfpga_cyclone5_restart,
         .dt_compat      = altera_dt_match,
diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h
index c33f4d9361bd..633e678e01a3 100644
--- a/arch/arm/mach-spear13xx/include/mach/generic.h
+++ b/arch/arm/mach-spear13xx/include/mach/generic.h
@@ -18,7 +18,7 @@
 #include <asm/mach/time.h>
 
 /* Add spear13xx structure declarations here */
-extern struct sys_timer spear13xx_timer;
+extern void spear13xx_timer_init(void);
 extern struct pl022_ssp_controller pl022_plat_data;
 extern struct dw_dma_platform_data dmac_plat_data;
 extern struct dw_dma_slave cf_dma_priv;
@@ -28,7 +28,6 @@ extern struct dw_dma_slave nand_write_dma_priv;
 /* Add spear13xx family function declarations here */
 void __init spear_setup_of_timer(void);
 void __init spear13xx_map_io(void);
-void __init spear13xx_dt_init_irq(void);
 void __init spear13xx_l2x0_init(void);
 bool dw_dma_filter(struct dma_chan *chan, void *slave);
 void spear_restart(char, const char *);
diff --git a/arch/arm/mach-spear13xx/platsmp.c b/arch/arm/mach-spear13xx/platsmp.c
index 2eaa3fa7b432..af4ade61cd95 100644
--- a/arch/arm/mach-spear13xx/platsmp.c
+++ b/arch/arm/mach-spear13xx/platsmp.c
@@ -15,8 +15,8 @@
 #include <linux/jiffies.h>
 #include <linux/io.h>
 #include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <mach/spear.h>
 #include <mach/generic.h>
@@ -104,8 +104,6 @@ static void __init spear13xx_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init spear13xx_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c
index 02f4724bb0d4..56214d1076ef 100644
--- a/arch/arm/mach-spear13xx/spear1310.c
+++ b/arch/arm/mach-spear13xx/spear1310.c
@@ -14,9 +14,9 @@
 #define pr_fmt(fmt) "SPEAr1310: " fmt
 
 #include <linux/amba/pl022.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
 #include <linux/pata_arasan_cf_data.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <mach/generic.h>
@@ -90,9 +90,8 @@ static void __init spear1310_map_io(void)
 DT_MACHINE_START(SPEAR1310_DT, "ST SPEAr1310 SoC with Flattened Device Tree")
         .smp            =       smp_ops(spear13xx_smp_ops),
         .map_io         =       spear1310_map_io,
-        .init_irq       =       spear13xx_dt_init_irq,
-        .handle_irq     =       gic_handle_irq,
-        .timer          =       &spear13xx_timer,
+        .init_irq       =       irqchip_init,
+        .init_time      =       spear13xx_timer_init,
         .init_machine   =       spear1310_dt_init,
         .restart        =       spear_restart,
         .dt_compat      =       spear1310_dt_board_compat,
diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c
index 081014fb314a..9a28beb2a113 100644
--- a/arch/arm/mach-spear13xx/spear1340.c
+++ b/arch/arm/mach-spear13xx/spear1340.c
@@ -18,7 +18,7 @@
 #include <linux/delay.h>
 #include <linux/dw_dmac.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/gic.h>
+#include <linux/irqchip.h>
 #include <asm/mach/arch.h>
 #include <mach/dma.h>
 #include <mach/generic.h>
@@ -184,9 +184,8 @@ static const char * const spear1340_dt_board_compat[] = {
 DT_MACHINE_START(SPEAR1340_DT, "ST SPEAr1340 SoC with Flattened Device Tree")
         .smp            =       smp_ops(spear13xx_smp_ops),
         .map_io         =       spear13xx_map_io,
-        .init_irq       =       spear13xx_dt_init_irq,
-        .handle_irq     =       gic_handle_irq,
-        .timer          =       &spear13xx_timer,
+        .init_irq       =       irqchip_init,
+        .init_time      =       spear13xx_timer_init,
         .init_machine   =       spear1340_dt_init,
         .restart        =       spear_restart,
         .dt_compat      =       spear1340_dt_board_compat,
diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c
index c4af775a8451..c7d2b4a8d8cc 100644
--- a/arch/arm/mach-spear13xx/spear13xx.c
+++ b/arch/arm/mach-spear13xx/spear13xx.c
@@ -17,9 +17,8 @@
 #include <linux/clk.h>
 #include <linux/dw_dmac.h>
 #include <linux/err.h>
-#include <linux/of_irq.h>
+#include <linux/of.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 #include <asm/smp_twd.h>
 #include <mach/dma.h>
@@ -153,7 +152,7 @@ static void __init spear13xx_clk_init(void)
                 pr_err("%s: Unknown machine\n", __func__);
 }
 
-static void __init spear13xx_timer_init(void)
+void __init spear13xx_timer_init(void)
 {
         char pclk_name[] = "osc_24m_clk";
         struct clk *gpt_clk, *pclk;
@@ -182,17 +181,3 @@ static void __init spear13xx_timer_init(void)
         spear_setup_of_timer();
         twd_local_timer_of_register();
 }
-
-struct sys_timer spear13xx_timer = {
-        .init = spear13xx_timer_init,
-};
-
-static const struct of_device_id gic_of_match[] __initconst = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
-        { /* Sentinel */ }
-};
-
-void __init spear13xx_dt_init_irq(void)
-{
-        of_irq_init(gic_of_match);
-}
diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
index ce19113ca791..df310799e416 100644
--- a/arch/arm/mach-spear3xx/include/mach/generic.h
+++ b/arch/arm/mach-spear3xx/include/mach/generic.h
@@ -22,7 +22,7 @@
 #include <asm/mach/map.h>
 
 /* Add spear3xx family device structure declarations here */
-extern struct sys_timer spear3xx_timer;
+extern void spear3xx_timer_init(void);
 extern struct pl022_ssp_controller pl022_plat_data;
 extern struct pl08x_platform_data pl080_plat_data;
 
@@ -30,7 +30,6 @@ extern struct pl08x_platform_data pl080_plat_data;
 void __init spear_setup_of_timer(void);
 void __init spear3xx_clk_init(void);
 void __init spear3xx_map_io(void);
-void __init spear3xx_dt_init_irq(void);
 
 void spear_restart(char, const char *);
 
diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c
index a69cbfdb07ee..bbc9b7e9c62c 100644
--- a/arch/arm/mach-spear3xx/spear300.c
+++ b/arch/arm/mach-spear3xx/spear300.c
@@ -14,8 +14,8 @@
 #define pr_fmt(fmt) "SPEAr300: " fmt
 
 #include <linux/amba/pl08x.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -212,9 +212,8 @@ static void __init spear300_map_io(void)
 
 DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree")
         .map_io         =       spear300_map_io,
-        .init_irq       =       spear3xx_dt_init_irq,
-        .handle_irq     =       vic_handle_irq,
-        .timer          =       &spear3xx_timer,
+        .init_irq       =       irqchip_init,
+        .init_time      =       spear3xx_timer_init,
         .init_machine   =       spear300_dt_init,
         .restart        =       spear_restart,
         .dt_compat      =       spear300_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c
index b963ebb10b56..c13a434a8195 100644
--- a/arch/arm/mach-spear3xx/spear310.c
+++ b/arch/arm/mach-spear3xx/spear310.c
@@ -15,8 +15,8 @@
 
 #include <linux/amba/pl08x.h>
 #include <linux/amba/serial.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -254,9 +254,8 @@ static void __init spear310_map_io(void)
 
 DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree")
         .map_io         =       spear310_map_io,
-        .init_irq       =       spear3xx_dt_init_irq,
-        .handle_irq     =       vic_handle_irq,
-        .timer          =       &spear3xx_timer,
+        .init_irq       =       irqchip_init,
+        .init_time      =       spear3xx_timer_init,
         .init_machine   =       spear310_dt_init,
         .restart        =       spear_restart,
         .dt_compat      =       spear310_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c
index 66e3a0c33e75..e1c77079a3e5 100644
--- a/arch/arm/mach-spear3xx/spear320.c
+++ b/arch/arm/mach-spear3xx/spear320.c
@@ -16,8 +16,8 @@
 #include <linux/amba/pl022.h>
 #include <linux/amba/pl08x.h>
 #include <linux/amba/serial.h>
+#include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -268,9 +268,8 @@ static void __init spear320_map_io(void)
 
 DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree")
         .map_io         =       spear320_map_io,
-        .init_irq       =       spear3xx_dt_init_irq,
-        .handle_irq     =       vic_handle_irq,
-        .timer          =       &spear3xx_timer,
+        .init_irq       =       irqchip_init,
+        .init_time      =       spear3xx_timer_init,
         .init_machine   =       spear320_dt_init,
         .restart        =       spear_restart,
         .dt_compat      =       spear320_dt_board_compat,
diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c
index 38fe95db31a7..b2ba516ca2d4 100644
--- a/arch/arm/mach-spear3xx/spear3xx.c
+++ b/arch/arm/mach-spear3xx/spear3xx.c
@@ -15,11 +15,8 @@
 
 #include <linux/amba/pl022.h>
 #include <linux/amba/pl08x.h>
-#include <linux/irqchip/spear-shirq.h>
-#include <linux/of_irq.h>
 #include <linux/io.h>
 #include <asm/hardware/pl080.h>
-#include <asm/hardware/vic.h>
 #include <plat/pl080.h>
 #include <mach/generic.h>
 #include <mach/spear.h>
@@ -87,7 +84,7 @@ void __init spear3xx_map_io(void)
         iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc));
 }
 
-static void __init spear3xx_timer_init(void)
+void __init spear3xx_timer_init(void)
 {
         char pclk_name[] = "pll3_clk";
         struct clk *gpt_clk, *pclk;
@@ -115,20 +112,3 @@ static void __init spear3xx_timer_init(void)
 
         spear_setup_of_timer();
 }
-
-struct sys_timer spear3xx_timer = {
-        .init = spear3xx_timer_init,
-};
-
-static const struct of_device_id vic_of_match[] __initconst = {
-        { .compatible = "arm,pl190-vic", .data = vic_of_init, },
-        { .compatible = "st,spear300-shirq", .data = spear300_shirq_of_init, },
-        { .compatible = "st,spear310-shirq", .data = spear310_shirq_of_init, },
-        { .compatible = "st,spear320-shirq", .data = spear320_shirq_of_init, },
-        { /* Sentinel */ }
-};
-
-void __init spear3xx_dt_init_irq(void)
-{
-        of_irq_init(vic_of_match);
-}
diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c
index 5a5a52db252b..b8bd33ca88bd 100644
--- a/arch/arm/mach-spear6xx/spear6xx.c
+++ b/arch/arm/mach-spear6xx/spear6xx.c
@@ -16,12 +16,11 @@
 #include <linux/amba/pl08x.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/irqchip.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <asm/hardware/pl080.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
@@ -374,7 +373,7 @@ void __init spear6xx_map_io(void)
         iotable_init(spear6xx_io_desc, ARRAY_SIZE(spear6xx_io_desc));
 }
 
-static void __init spear6xx_timer_init(void)
+void __init spear6xx_timer_init(void)
 {
         char pclk_name[] = "pll3_clk";
         struct clk *gpt_clk, *pclk;
@@ -403,10 +402,6 @@ static void __init spear6xx_timer_init(void)
         spear_setup_of_timer();
 }
 
-struct sys_timer spear6xx_timer = {
-        .init = spear6xx_timer_init,
-};
-
 /* Add auxdata to pass platform data */
 struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = {
         OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL,
@@ -425,21 +420,10 @@ static const char *spear600_dt_board_compat[] = {
         NULL
 };
 
-static const struct of_device_id vic_of_match[] __initconst = {
-        { .compatible = "arm,pl190-vic", .data = vic_of_init, },
-        { /* Sentinel */ }
-};
-
-static void __init spear6xx_dt_init_irq(void)
-{
-        of_irq_init(vic_of_match);
-}
-
 DT_MACHINE_START(SPEAR600_DT, "ST SPEAr600 (Flattened Device Tree)")
         .map_io         =       spear6xx_map_io,
-        .init_irq       =       spear6xx_dt_init_irq,
-        .handle_irq     =       vic_handle_irq,
-        .timer          =       &spear6xx_timer,
+        .init_irq       =       irqchip_init,
+        .init_time      =       spear6xx_timer_init,
         .init_machine   =       spear600_dt_init,
         .restart        =       spear_restart,
         .dt_compat      =       spear600_dt_board_compat,
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 1dc8a92e5a5f..23afb732cb40 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -21,15 +21,16 @@
 
 #include <linux/irqchip/sunxi.h>
 
-#include <asm/hardware/vic.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include "sunxi.h"
 
 #define WATCHDOG_CTRL_REG       0x00
+#define WATCHDOG_CTRL_RESTART           (1 << 0)
 #define WATCHDOG_MODE_REG       0x04
+#define WATCHDOG_MODE_ENABLE            (1 << 0)
+#define WATCHDOG_MODE_RESET_ENABLE      (1 << 1)
 
 static void __iomem *wdt_base;
 
@@ -50,11 +51,19 @@ static void sunxi_restart(char mode, const char *cmd)
                 return;
 
         /* Enable timer and set reset bit in the watchdog */
-        writel(3, wdt_base + WATCHDOG_MODE_REG);
-        writel(0xa57 << 1 | 1, wdt_base + WATCHDOG_CTRL_REG);
-        while(1) {
+        writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
+                wdt_base + WATCHDOG_MODE_REG);
+
+        /*
+         * Restart the watchdog. The default (and lowest) interval
+         * value for the watchdog is 0.5s.
+         */
+        writel(WATCHDOG_CTRL_RESTART, wdt_base + WATCHDOG_CTRL_REG);
+
+        while (1) {
                 mdelay(5);
-                writel(3, wdt_base + WATCHDOG_MODE_REG);
+                writel(WATCHDOG_MODE_ENABLE | WATCHDOG_MODE_RESET_ENABLE,
+                        wdt_base + WATCHDOG_MODE_REG);
         }
 }
 
@@ -91,6 +100,6 @@ DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
         .init_irq       = sunxi_init_irq,
         .handle_irq     = sunxi_handle_irq,
         .restart        = sunxi_restart,
-        .timer          = &sunxi_timer,
+        .init_time      = &sunxi_timer_init,
         .dt_compat      = sunxi_board_dt_compat,
 MACHINE_END
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index b442f15fd01a..1ec7f80e2af5 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -6,9 +6,9 @@ config ARCH_TEGRA_2x_SOC
         bool "Enable support for Tegra20 family"
         select ARCH_REQUIRE_GPIOLIB
         select ARM_ERRATA_720789
-        select ARM_ERRATA_742230
+        select ARM_ERRATA_742230 if SMP
         select ARM_ERRATA_751472
-        select ARM_ERRATA_754327
+        select ARM_ERRATA_754327 if SMP
         select ARM_ERRATA_764369 if SMP
         select ARM_GIC
         select CPU_FREQ_TABLE if CPU_FREQ
diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile
index 0979e8bba78a..f0520961bafe 100644
--- a/arch/arm/mach-tegra/Makefile
+++ b/arch/arm/mach-tegra/Makefile
@@ -2,15 +2,16 @@ obj-y                                   += common.o
 obj-y                                   += io.o
 obj-y                                   += irq.o
 obj-y                                   += clock.o
-obj-y                                   += timer.o
 obj-y                                   += fuse.o
 obj-y                                   += pmc.o
 obj-y                                   += flowctrl.o
 obj-y                                   += powergate.o
 obj-y                                   += apbio.o
 obj-y                                   += pm.o
+obj-y                                   += reset.o
+obj-y                                   += reset-handler.o
+obj-y                                   += sleep.o
 obj-$(CONFIG_CPU_IDLE)                  += cpuidle.o
-obj-$(CONFIG_CPU_IDLE)                  += sleep.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_clocks_data.o
 obj-$(CONFIG_ARCH_TEGRA_2x_SOC)         += tegra20_speedo.o
@@ -27,7 +28,6 @@ ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_ARCH_TEGRA_3x_SOC)         += cpuidle-tegra30.o
 endif
 obj-$(CONFIG_SMP)                       += platsmp.o headsmp.o
-obj-$(CONFIG_SMP)                       += reset.o
 obj-$(CONFIG_HOTPLUG_CPU)               += hotplug.o
 obj-$(CONFIG_CPU_FREQ)                  += cpu-tegra.o
 obj-$(CONFIG_TEGRA_PCI)                 += pcie.o
diff --git a/arch/arm/mach-tegra/apbio.c b/arch/arm/mach-tegra/apbio.c
index d091675ba376..d7aa52ea6cfc 100644
--- a/arch/arm/mach-tegra/apbio.c
+++ b/arch/arm/mach-tegra/apbio.c
@@ -38,7 +38,7 @@ static void tegra_apb_writel_direct(u32 value, unsigned long offset);
 static struct dma_chan *tegra_apb_dma_chan;
 static struct dma_slave_config dma_sconfig;
 
-bool tegra_apb_dma_init(void)
+static bool tegra_apb_dma_init(void)
 {
         dma_cap_mask_t mask;
 
diff --git a/arch/arm/mach-tegra/board-dt-tegra20.c b/arch/arm/mach-tegra/board-dt-tegra20.c
index 734d9cc87f2e..d320f7ad7350 100644
--- a/arch/arm/mach-tegra/board-dt-tegra20.c
+++ b/arch/arm/mach-tegra/board-dt-tegra20.c
@@ -15,6 +15,7 @@
  *
  */
 
+#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -25,7 +26,6 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/pda_power.h>
 #include <linux/platform_data/tegra_usb.h>
@@ -34,7 +34,6 @@
 #include <linux/i2c-tegra.h>
 #include <linux/usb/tegra_usb_phy.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -45,31 +44,31 @@
 #include "common.h"
 #include "iomap.h"
 
-struct tegra_ehci_platform_data tegra_ehci1_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci1_pdata = {
         .operating_mode = TEGRA_USB_OTG,
         .power_down_on_bus_suspend = 1,
         .vbus_gpio = -1,
 };
 
-struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
+static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = {
         .reset_gpio = -1,
         .clk = "cdev2",
 };
 
-struct tegra_ehci_platform_data tegra_ehci2_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci2_pdata = {
         .phy_config = &tegra_ehci2_ulpi_phy_config,
         .operating_mode = TEGRA_USB_HOST,
         .power_down_on_bus_suspend = 1,
         .vbus_gpio = -1,
 };
 
-struct tegra_ehci_platform_data tegra_ehci3_pdata = {
+static struct tegra_ehci_platform_data tegra_ehci3_pdata = {
         .operating_mode = TEGRA_USB_HOST,
         .power_down_on_bus_suspend = 1,
         .vbus_gpio = -1,
 };
 
-struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = {
         OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL),
         OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL),
         OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL),
@@ -202,8 +201,7 @@ DT_MACHINE_START(TEGRA_DT, "nVidia Tegra20 (Flattened Device Tree)")
         .smp            = smp_ops(tegra_smp_ops),
         .init_early     = tegra20_init_early,
         .init_irq       = tegra_dt_init_irq,
-        .handle_irq     = gic_handle_irq,
-        .timer          = &tegra_sys_timer,
+        .init_time      = clocksource_of_init,
         .init_machine   = tegra_dt_init,
         .init_late      = tegra_dt_init_late,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
index 6497d1236b08..97e1f67fc31d 100644
--- a/arch/arm/mach-tegra/board-dt-tegra30.c
+++ b/arch/arm/mach-tegra/board-dt-tegra30.c
@@ -23,6 +23,7 @@
  *
  */
 
+#include <linux/clocksource.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -31,14 +32,13 @@
 #include <linux/of_platform.h>
 
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include "board.h"
 #include "clock.h"
 #include "common.h"
 #include "iomap.h"
 
-struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
+static struct of_dev_auxdata tegra30_auxdata_lookup[] __initdata = {
         OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000000, "sdhci-tegra.0", NULL),
         OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000200, "sdhci-tegra.1", NULL),
         OF_DEV_AUXDATA("nvidia,tegra20-sdhci", 0x78000400, "sdhci-tegra.2", NULL),
@@ -112,8 +112,7 @@ DT_MACHINE_START(TEGRA30_DT, "NVIDIA Tegra30 (Flattened Device Tree)")
         .map_io         = tegra_map_common_io,
         .init_early     = tegra30_init_early,
         .init_irq       = tegra_dt_init_irq,
-        .handle_irq     = gic_handle_irq,
-        .timer          = &tegra_sys_timer,
+        .init_time      = clocksource_of_init,
         .init_machine   = tegra30_dt_init,
         .init_late      = tegra_init_late,
         .restart        = tegra_assert_system_reset,
diff --git a/arch/arm/mach-tegra/board.h b/arch/arm/mach-tegra/board.h
index 91fbe733a21e..da8f5a3c4240 100644
--- a/arch/arm/mach-tegra/board.h
+++ b/arch/arm/mach-tegra/board.h
@@ -55,5 +55,4 @@ static inline int harmony_pcie_init(void) { return 0; }
 
 void __init tegra_paz00_wifikill_init(void);
 
-extern struct sys_timer tegra_sys_timer;
 #endif
diff --git a/arch/arm/mach-tegra/common.c b/arch/arm/mach-tegra/common.c
index d54cfc54b9fe..8f0ffe97ffee 100644
--- a/arch/arm/mach-tegra/common.c
+++ b/arch/arm/mach-tegra/common.c
@@ -21,10 +21,9 @@
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
-#include <linux/of_irq.h>
+#include <linux/irqchip.h>
 
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/powergate.h>
 
@@ -37,6 +36,7 @@
 #include "apbio.h"
 #include "sleep.h"
 #include "pm.h"
+#include "reset.h"
 
 /*
  * Storage for debug-macro.S's state.
@@ -57,15 +57,10 @@ u32 tegra_uart_config[4] = {
 };
 
 #ifdef CONFIG_OF
-static const struct of_device_id tegra_dt_irq_match[] __initconst = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init },
-        { }
-};
-
 void __init tegra_dt_init_irq(void)
 {
         tegra_init_irq();
-        of_irq_init(tegra_dt_irq_match);
+        irqchip_init();
 }
 #endif
 
@@ -137,6 +132,7 @@ static void __init tegra_init_cache(void)
 #ifdef CONFIG_ARCH_TEGRA_2x_SOC
 void __init tegra20_init_early(void)
 {
+        tegra_cpu_reset_handler_init();
         tegra_apb_io_init();
         tegra_init_fuse();
         tegra2_init_clocks();
@@ -150,6 +146,7 @@ void __init tegra20_init_early(void)
 #ifdef CONFIG_ARCH_TEGRA_3x_SOC
 void __init tegra30_init_early(void)
 {
+        tegra_cpu_reset_handler_init();
         tegra_apb_io_init();
         tegra_init_fuse();
         tegra30_init_clocks();
diff --git a/arch/arm/mach-tegra/common.h b/arch/arm/mach-tegra/common.h
index 02f71b4f1e51..32f8eb3fe344 100644
--- a/arch/arm/mach-tegra/common.h
+++ b/arch/arm/mach-tegra/common.h
@@ -1,4 +1,5 @@
 extern struct smp_operations tegra_smp_ops;
 
+extern int tegra_cpu_kill(unsigned int cpu);
 extern void tegra_cpu_die(unsigned int cpu);
 extern int tegra_cpu_disable(unsigned int cpu);
diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c
index a36a03d3c9a0..ece29ab15b59 100644
--- a/arch/arm/mach-tegra/cpu-tegra.c
+++ b/arch/arm/mach-tegra/cpu-tegra.c
@@ -214,24 +214,6 @@ static int tegra_cpu_init(struct cpufreq_policy *policy)
         if (policy->cpu >= NUM_CPUS)
                 return -EINVAL;
 
-        cpu_clk = clk_get_sys(NULL, "cpu");
-        if (IS_ERR(cpu_clk))
-                return PTR_ERR(cpu_clk);
-
-        pll_x_clk = clk_get_sys(NULL, "pll_x");
-        if (IS_ERR(pll_x_clk))
-                return PTR_ERR(pll_x_clk);
-
-        pll_p_clk = clk_get_sys(NULL, "pll_p");
-        if (IS_ERR(pll_p_clk))
-                return PTR_ERR(pll_p_clk);
-
-        emc_clk = clk_get_sys("cpu", "emc");
-        if (IS_ERR(emc_clk)) {
-                clk_put(cpu_clk);
-                return PTR_ERR(emc_clk);
-        }
-
         clk_prepare_enable(emc_clk);
         clk_prepare_enable(cpu_clk);
 
@@ -255,8 +237,6 @@ static int tegra_cpu_exit(struct cpufreq_policy *policy)
 {
         cpufreq_frequency_table_cpuinfo(policy, freq_table);
         clk_disable_unprepare(emc_clk);
-        clk_put(emc_clk);
-        clk_put(cpu_clk);
         return 0;
 }
 
@@ -277,12 +257,32 @@ static struct cpufreq_driver tegra_cpufreq_driver = {
 
 static int __init tegra_cpufreq_init(void)
 {
+        cpu_clk = clk_get_sys(NULL, "cpu");
+        if (IS_ERR(cpu_clk))
+                return PTR_ERR(cpu_clk);
+
+        pll_x_clk = clk_get_sys(NULL, "pll_x");
+        if (IS_ERR(pll_x_clk))
+                return PTR_ERR(pll_x_clk);
+
+        pll_p_clk = clk_get_sys(NULL, "pll_p");
+        if (IS_ERR(pll_p_clk))
+                return PTR_ERR(pll_p_clk);
+
+        emc_clk = clk_get_sys("cpu", "emc");
+        if (IS_ERR(emc_clk)) {
+                clk_put(cpu_clk);
+                return PTR_ERR(emc_clk);
+        }
+
         return cpufreq_register_driver(&tegra_cpufreq_driver);
 }
 
 static void __exit tegra_cpufreq_exit(void)
 {
         cpufreq_unregister_driver(&tegra_cpufreq_driver);
+        clk_put(emc_clk);
+        clk_put(cpu_clk);
 }
 
 
diff --git a/arch/arm/mach-tegra/cpuidle-tegra30.c b/arch/arm/mach-tegra/cpuidle-tegra30.c
index 5e8cbf5b799f..82530bd9b8c2 100644
--- a/arch/arm/mach-tegra/cpuidle-tegra30.c
+++ b/arch/arm/mach-tegra/cpuidle-tegra30.c
@@ -121,9 +121,9 @@ static inline bool tegra30_cpu_core_power_down(struct cpuidle_device *dev,
 }
 #endif
 
-static int __cpuinit tegra30_idle_lp2(struct cpuidle_device *dev,
-                                      struct cpuidle_driver *drv,
-                                      int index)
+static int tegra30_idle_lp2(struct cpuidle_device *dev,
+                            struct cpuidle_driver *drv,
+                            int index)
 {
         u32 cpu = is_smp() ? cpu_logical_map(dev->cpu) : dev->cpu;
         bool entered_lp2 = false;
diff --git a/arch/arm/mach-tegra/flowctrl.c b/arch/arm/mach-tegra/flowctrl.c
index a2250ddae797..5393eb2cae21 100644
--- a/arch/arm/mach-tegra/flowctrl.c
+++ b/arch/arm/mach-tegra/flowctrl.c
@@ -26,14 +26,14 @@
 #include "flowctrl.h"
 #include "iomap.h"
 
-u8 flowctrl_offset_halt_cpu[] = {
+static u8 flowctrl_offset_halt_cpu[] = {
         FLOW_CTRL_HALT_CPU0_EVENTS,
         FLOW_CTRL_HALT_CPU1_EVENTS,
         FLOW_CTRL_HALT_CPU1_EVENTS + 8,
         FLOW_CTRL_HALT_CPU1_EVENTS + 16,
 };
 
-u8 flowctrl_offset_cpu_csr[] = {
+static u8 flowctrl_offset_cpu_csr[] = {
         FLOW_CTRL_CPU0_CSR,
         FLOW_CTRL_CPU1_CSR,
         FLOW_CTRL_CPU1_CSR + 8,
diff --git a/arch/arm/mach-tegra/headsmp.S b/arch/arm/mach-tegra/headsmp.S
index 4a317fae6860..b2834810b02b 100644
--- a/arch/arm/mach-tegra/headsmp.S
+++ b/arch/arm/mach-tegra/headsmp.S
@@ -1,22 +1,9 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 
-#include <asm/cache.h>
-#include <asm/asm-offsets.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include "flowctrl.h"
-#include "iomap.h"
-#include "reset.h"
 #include "sleep.h"
 
-#define APB_MISC_GP_HIDREV      0x804
-#define PMC_SCRATCH41   0x140
-
-#define RESET_DATA(x)   ((TEGRA_RESET_##x)*4)
-
         .section ".text.head", "ax"
-        __CPUINIT
 
 /*
  * Tegra specific entry point for secondary CPUs.
@@ -61,7 +48,6 @@ ENTRY(v7_invalidate_l1)
         mov     pc, lr
 ENDPROC(v7_invalidate_l1)
 
-
 ENTRY(tegra_secondary_startup)
         bl      v7_invalidate_l1
         /* Enable coresight */
@@ -69,210 +55,3 @@ ENTRY(tegra_secondary_startup)
         mcr     p14, 0, r0, c7, c12, 6
         b       secondary_startup
 ENDPROC(tegra_secondary_startup)
-
-#ifdef CONFIG_PM_SLEEP
-/*
- *      tegra_resume
- *
- *        CPU boot vector when restarting the a CPU following
- *        an LP2 transition. Also branched to by LP0 and LP1 resume after
- *        re-enabling sdram.
- */
-ENTRY(tegra_resume)
-        bl      v7_invalidate_l1
-        /* Enable coresight */
-        mov32   r0, 0xC5ACCE55
-        mcr     p14, 0, r0, c7, c12, 6
-
-        cpu_id  r0
-        cmp     r0, #0                          @ CPU0?
-        bne     cpu_resume                      @ no
-
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-        /* Are we on Tegra20? */
-        mov32   r6, TEGRA_APB_MISC_BASE
-        ldr     r0, [r6, #APB_MISC_GP_HIDREV]
-        and     r0, r0, #0xff00
-        cmp     r0, #(0x20 << 8)
-        beq     1f                              @ Yes
-        /* Clear the flow controller flags for this CPU. */
-        mov32   r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR   @ CPU0 CSR
-        ldr     r1, [r2]
-        /* Clear event & intr flag */
-        orr     r1, r1, \
-                #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-        movw    r0, #0x0FFD     @ enable, cluster_switch, immed, & bitmaps
-        bic     r1, r1, r0
-        str     r1, [r2]
-1:
-#endif
-
-#ifdef CONFIG_HAVE_ARM_SCU
-        /* enable SCU */
-        mov32   r0, TEGRA_ARM_PERIF_BASE
-        ldr     r1, [r0]
-        orr     r1, r1, #1
-        str     r1, [r0]
-#endif
-
-        /* L2 cache resume & re-enable */
-        l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
-
-        b       cpu_resume
-ENDPROC(tegra_resume)
-#endif
-
-#ifdef CONFIG_CACHE_L2X0
-        .globl  l2x0_saved_regs_addr
-l2x0_saved_regs_addr:
-        .long   0
-#endif
-
-        .align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler_start)
-
-/*
- * __tegra_cpu_reset_handler:
- *
- * Common handler for all CPU reset events.
- *
- * Register usage within the reset handler:
- *
- *      R7  = CPU present (to the OS) mask
- *      R8  = CPU in LP1 state mask
- *      R9  = CPU in LP2 state mask
- *      R10 = CPU number
- *      R11 = CPU mask
- *      R12 = pointer to reset handler data
- *
- * NOTE: This code is copied to IRAM. All code and data accesses
- *       must be position-independent.
- */
-
-        .align L1_CACHE_SHIFT
-ENTRY(__tegra_cpu_reset_handler)
-
-        cpsid   aif, 0x13                       @ SVC mode, interrupts disabled
-        mrc     p15, 0, r10, c0, c0, 5          @ MPIDR
-        and     r10, r10, #0x3                  @ R10 = CPU number
-        mov     r11, #1
-        mov     r11, r11, lsl r10               @ R11 = CPU mask
-        adr     r12, __tegra_cpu_reset_handler_data
-
-#ifdef CONFIG_SMP
-        /* Does the OS know about this CPU? */
-        ldr     r7, [r12, #RESET_DATA(MASK_PRESENT)]
-        tst     r7, r11                         @ if !present
-        bleq    __die                           @ CPU not present (to OS)
-#endif
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-        /* Are we on Tegra20? */
-        mov32   r6, TEGRA_APB_MISC_BASE
-        ldr     r0, [r6, #APB_MISC_GP_HIDREV]
-        and     r0, r0, #0xff00
-        cmp     r0, #(0x20 << 8)
-        bne     1f
-        /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
-        mov32   r6, TEGRA_PMC_BASE
-        mov     r0, #0
-        cmp     r10, #0
-        strne   r0, [r6, #PMC_SCRATCH41]
-1:
-#endif
-
-        /* Waking up from LP2? */
-        ldr     r9, [r12, #RESET_DATA(MASK_LP2)]
-        tst     r9, r11                         @ if in_lp2
-        beq     __is_not_lp2
-        ldr     lr, [r12, #RESET_DATA(STARTUP_LP2)]
-        cmp     lr, #0
-        bleq    __die                           @ no LP2 startup handler
-        bx      lr
-
-__is_not_lp2:
-
-#ifdef CONFIG_SMP
-        /*
-         * Can only be secondary boot (initial or hotplug) but CPU 0
-         * cannot be here.
-         */
-        cmp     r10, #0
-        bleq    __die                           @ CPU0 cannot be here
-        ldr     lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
-        cmp     lr, #0
-        bleq    __die                           @ no secondary startup handler
-        bx      lr
-#endif
-
-/*
- * We don't know why the CPU reset. Just kill it.
- * The LR register will contain the address we died at + 4.
- */
-
-__die:
-        sub     lr, lr, #4
-        mov32   r7, TEGRA_PMC_BASE
-        str     lr, [r7, #PMC_SCRATCH41]
-
-        mov32   r7, TEGRA_CLK_RESET_BASE
-
-        /* Are we on Tegra20? */
-        mov32   r6, TEGRA_APB_MISC_BASE
-        ldr     r0, [r6, #APB_MISC_GP_HIDREV]
-        and     r0, r0, #0xff00
-        cmp     r0, #(0x20 << 8)
-        bne     1f
-
-#ifdef CONFIG_ARCH_TEGRA_2x_SOC
-        mov32   r0, 0x1111
-        mov     r1, r0, lsl r10
-        str     r1, [r7, #0x340]                @ CLK_RST_CPU_CMPLX_SET
-#endif
-1:
-#ifdef CONFIG_ARCH_TEGRA_3x_SOC
-        mov32   r6, TEGRA_FLOW_CTRL_BASE
-
-        cmp     r10, #0
-        moveq   r1, #FLOW_CTRL_HALT_CPU0_EVENTS
-        moveq   r2, #FLOW_CTRL_CPU0_CSR
-        movne   r1, r10, lsl #3
-        addne   r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
-        addne   r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
-
-        /* Clear CPU "event" and "interrupt" flags and power gate
-           it when halting but not before it is in the "WFI" state. */
-        ldr     r0, [r6, +r2]
-        orr     r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
-        orr     r0, r0, #FLOW_CTRL_CSR_ENABLE
-        str     r0, [r6, +r2]
-
-        /* Unconditionally halt this CPU */
-        mov     r0, #FLOW_CTRL_WAITEVENT
-        str     r0, [r6, +r1]
-        ldr     r0, [r6, +r1]                   @ memory barrier
-
-        dsb
-        isb
-        wfi                                     @ CPU should be power gated here
-
-        /* If the CPU didn't power gate above just kill it's clock. */
-
-        mov     r0, r11, lsl #8
-        str     r0, [r7, #348]                  @ CLK_CPU_CMPLX_SET
-#endif
-
-        /* If the CPU still isn't dead, just spin here. */
-        b       .
-ENDPROC(__tegra_cpu_reset_handler)
-
-        .align L1_CACHE_SHIFT
-        .type   __tegra_cpu_reset_handler_data, %object
-        .globl  __tegra_cpu_reset_handler_data
-__tegra_cpu_reset_handler_data:
-        .rept   TEGRA_RESET_DATA_SIZE
-        .long   0
-        .endr
-        .align L1_CACHE_SHIFT
-
-ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/hotplug.c b/arch/arm/mach-tegra/hotplug.c
index dca5141a2c31..6a27de4001ee 100644
--- a/arch/arm/mach-tegra/hotplug.c
+++ b/arch/arm/mach-tegra/hotplug.c
@@ -19,6 +19,17 @@
 
 static void (*tegra_hotplug_shutdown)(void);
 
+int tegra_cpu_kill(unsigned cpu)
+{
+        cpu = cpu_logical_map(cpu);
+
+        /* Clock gate the CPU */
+        tegra_wait_cpu_in_reset(cpu);
+        tegra_disable_cpu_clock(cpu);
+
+        return 1;
+}
+
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -26,18 +37,12 @@ static void (*tegra_hotplug_shutdown)(void);
  */
 void __ref tegra_cpu_die(unsigned int cpu)
 {
-        cpu = cpu_logical_map(cpu);
-
-        /* Flush the L1 data cache. */
-        flush_cache_all();
+        /* Clean L1 data cache */
+        tegra_disable_clean_inv_dcache();
 
         /* Shut down the current CPU. */
         tegra_hotplug_shutdown();
 
-        /* Clock gate the CPU */
-        tegra_wait_cpu_in_reset(cpu);
-        tegra_disable_cpu_clock(cpu);
-
         /* Should never return here. */
         BUG();
 }
diff --git a/arch/arm/mach-tegra/include/mach/uncompress.h b/arch/arm/mach-tegra/include/mach/uncompress.h
index 485003f9b636..08386418196f 100644
--- a/arch/arm/mach-tegra/include/mach/uncompress.h
+++ b/arch/arm/mach-tegra/include/mach/uncompress.h
@@ -172,8 +172,4 @@ static inline void arch_decomp_setup(void)
         uart[UART_LCR << DEBUG_UART_SHIFT] = 3;
 }
 
-static inline void arch_decomp_wdog(void)
-{
-}
-
 #endif
diff --git a/arch/arm/mach-tegra/irq.c b/arch/arm/mach-tegra/irq.c
index b7886f183511..2ff2128cb9d8 100644
--- a/arch/arm/mach-tegra/irq.c
+++ b/arch/arm/mach-tegra/irq.c
@@ -22,8 +22,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/of.h>
-
-#include <asm/hardware/gic.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include "board.h"
 #include "iomap.h"
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 1b926df99c4b..3c4a43c892a5 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -18,11 +18,12 @@
 #include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach-types.h>
 #include <asm/smp_scu.h>
+#include <asm/smp_plat.h>
 
 #include <mach/powergate.h>
 
@@ -36,6 +37,7 @@
 
 extern void tegra_secondary_startup(void);
 
+static cpumask_t tegra_cpu_init_mask;
 static void __iomem *scu_base = IO_ADDRESS(TEGRA_ARM_PERIF_BASE);
 
 #define EVP_CPU_RESET_VECTOR \
@@ -50,6 +52,7 @@ static void __cpuinit tegra_secondary_init(unsigned int cpu)
          */
         gic_secondary_init(0);
 
+        cpumask_set_cpu(cpu, &tegra_cpu_init_mask);
 }
 
 static int tegra20_power_up_cpu(unsigned int cpu)
@@ -72,14 +75,42 @@ static int tegra30_power_up_cpu(unsigned int cpu)
         if (pwrgateid < 0)
                 return pwrgateid;
 
-        /* If this is the first boot, toggle powergates directly. */
+        /*
+         * The power up sequence of cold boot CPU and warm boot CPU
+         * was different.
+         *
+         * For warm boot CPU that was resumed from CPU hotplug, the
+         * power will be resumed automatically after un-halting the
+         * flow controller of the warm boot CPU. We need to wait for
+         * the confirmaiton that the CPU is powered then removing
+         * the IO clamps.
+         * For cold boot CPU, do not wait. After the cold boot CPU be
+         * booted, it will run to tegra_secondary_init() and set
+         * tegra_cpu_init_mask which influences what tegra30_power_up_cpu()
+         * next time around.
+         */
+        if (cpumask_test_cpu(cpu, &tegra_cpu_init_mask)) {
+                timeout = jiffies + msecs_to_jiffies(50);
+                do {
+                        if (!tegra_powergate_is_powered(pwrgateid))
+                                goto remove_clamps;
+                        udelay(10);
+                } while (time_before(jiffies, timeout));
+        }
+
+        /*
+         * The power status of the cold boot CPU is power gated as
+         * default. To power up the cold boot CPU, the power should
+         * be un-gated by un-toggling the power gate register
+         * manually.
+         */
         if (!tegra_powergate_is_powered(pwrgateid)) {
                 ret = tegra_powergate_power_on(pwrgateid);
                 if (ret)
                         return ret;
 
                 /* Wait for the power to come up. */
-                timeout = jiffies + 10*HZ;
+                timeout = jiffies + msecs_to_jiffies(100);
                 while (tegra_powergate_is_powered(pwrgateid)) {
                         if (time_after(jiffies, timeout))
                                 return -ETIMEDOUT;
@@ -87,6 +118,7 @@ static int tegra30_power_up_cpu(unsigned int cpu)
                 }
         }
 
+remove_clamps:
         /* CPU partition is powered. Enable the CPU clock. */
         tegra_enable_cpu_clock(cpu);
         udelay(10);
@@ -105,6 +137,8 @@ static int __cpuinit tegra_boot_secondary(unsigned int cpu, struct task_struct *
 {
         int status;
 
+        cpu = cpu_logical_map(cpu);
+
         /*
          * Force the CPU into reset. The CPU must remain in reset when the
          * flow controller state is cleared (which will cause the flow
@@ -159,13 +193,13 @@ static void __init tegra_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init tegra_smp_prepare_cpus(unsigned int max_cpus)
 {
-        tegra_cpu_reset_handler_init();
+        /* Always mark the boot CPU (CPU0) as initialized. */
+        cpumask_set_cpu(0, &tegra_cpu_init_mask);
+
         scu_enable(scu_base);
 }
 
@@ -175,6 +209,7 @@ struct smp_operations tegra_smp_ops __initdata = {
         .smp_secondary_init     = tegra_secondary_init,
         .smp_boot_secondary     = tegra_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
+        .cpu_kill               = tegra_cpu_kill,
         .cpu_die                = tegra_cpu_die,
         .cpu_disable            = tegra_cpu_disable,
 #endif
diff --git a/arch/arm/mach-tegra/pm.c b/arch/arm/mach-tegra/pm.c
index 1b11707eaca0..498d70b33775 100644
--- a/arch/arm/mach-tegra/pm.c
+++ b/arch/arm/mach-tegra/pm.c
@@ -148,7 +148,7 @@ static void suspend_cpu_complex(void)
         save_cpu_arch_register();
 }
 
-void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id)
+void tegra_clear_cpu_in_lp2(int phy_cpu_id)
 {
         u32 *cpu_in_lp2 = tegra_cpu_lp2_mask;
 
@@ -160,7 +160,7 @@ void __cpuinit tegra_clear_cpu_in_lp2(int phy_cpu_id)
         spin_unlock(&tegra_lp2_lock);
 }
 
-bool __cpuinit tegra_set_cpu_in_lp2(int phy_cpu_id)
+bool tegra_set_cpu_in_lp2(int phy_cpu_id)
 {
         bool last_cpu = false;
         cpumask_t *cpu_lp2_mask = tegra_cpu_lp2_mask;
diff --git a/arch/arm/mach-tegra/reset-handler.S b/arch/arm/mach-tegra/reset-handler.S
new file mode 100644
index 000000000000..54382ceade4a
--- /dev/null
+++ b/arch/arm/mach-tegra/reset-handler.S
@@ -0,0 +1,239 @@
+/*
+ * Copyright (c) 2012, NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+#include <asm/cache.h>
+#include <asm/asm-offsets.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include "flowctrl.h"
+#include "iomap.h"
+#include "reset.h"
+#include "sleep.h"
+
+#define APB_MISC_GP_HIDREV      0x804
+#define PMC_SCRATCH41   0x140
+
+#define RESET_DATA(x)   ((TEGRA_RESET_##x)*4)
+
+#ifdef CONFIG_PM_SLEEP
+/*
+ *      tegra_resume
+ *
+ *        CPU boot vector when restarting the a CPU following
+ *        an LP2 transition. Also branched to by LP0 and LP1 resume after
+ *        re-enabling sdram.
+ */
+ENTRY(tegra_resume)
+        bl      v7_invalidate_l1
+        /* Enable coresight */
+        mov32   r0, 0xC5ACCE55
+        mcr     p14, 0, r0, c7, c12, 6
+
+        cpu_id  r0
+        cmp     r0, #0                          @ CPU0?
+        bne     cpu_resume                      @ no
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+        /* Are we on Tegra20? */
+        mov32   r6, TEGRA_APB_MISC_BASE
+        ldr     r0, [r6, #APB_MISC_GP_HIDREV]
+        and     r0, r0, #0xff00
+        cmp     r0, #(0x20 << 8)
+        beq     1f                              @ Yes
+        /* Clear the flow controller flags for this CPU. */
+        mov32   r2, TEGRA_FLOW_CTRL_BASE + FLOW_CTRL_CPU0_CSR   @ CPU0 CSR
+        ldr     r1, [r2]
+        /* Clear event & intr flag */
+        orr     r1, r1, \
+                #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+        movw    r0, #0x0FFD     @ enable, cluster_switch, immed, & bitmaps
+        bic     r1, r1, r0
+        str     r1, [r2]
+1:
+#endif
+
+#ifdef CONFIG_HAVE_ARM_SCU
+        /* enable SCU */
+        mov32   r0, TEGRA_ARM_PERIF_BASE
+        ldr     r1, [r0]
+        orr     r1, r1, #1
+        str     r1, [r0]
+#endif
+
+        /* L2 cache resume & re-enable */
+        l2_cache_resume r0, r1, r2, l2x0_saved_regs_addr
+
+        b       cpu_resume
+ENDPROC(tegra_resume)
+#endif
+
+#ifdef CONFIG_CACHE_L2X0
+        .globl  l2x0_saved_regs_addr
+l2x0_saved_regs_addr:
+        .long   0
+#endif
+
+        .align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler_start)
+
+/*
+ * __tegra_cpu_reset_handler:
+ *
+ * Common handler for all CPU reset events.
+ *
+ * Register usage within the reset handler:
+ *
+ *      R7  = CPU present (to the OS) mask
+ *      R8  = CPU in LP1 state mask
+ *      R9  = CPU in LP2 state mask
+ *      R10 = CPU number
+ *      R11 = CPU mask
+ *      R12 = pointer to reset handler data
+ *
+ * NOTE: This code is copied to IRAM. All code and data accesses
+ *       must be position-independent.
+ */
+
+        .align L1_CACHE_SHIFT
+ENTRY(__tegra_cpu_reset_handler)
+
+        cpsid   aif, 0x13                       @ SVC mode, interrupts disabled
+        mrc     p15, 0, r10, c0, c0, 5          @ MPIDR
+        and     r10, r10, #0x3                  @ R10 = CPU number
+        mov     r11, #1
+        mov     r11, r11, lsl r10               @ R11 = CPU mask
+        adr     r12, __tegra_cpu_reset_handler_data
+
+#ifdef CONFIG_SMP
+        /* Does the OS know about this CPU? */
+        ldr     r7, [r12, #RESET_DATA(MASK_PRESENT)]
+        tst     r7, r11                         @ if !present
+        bleq    __die                           @ CPU not present (to OS)
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+        /* Are we on Tegra20? */
+        mov32   r6, TEGRA_APB_MISC_BASE
+        ldr     r0, [r6, #APB_MISC_GP_HIDREV]
+        and     r0, r0, #0xff00
+        cmp     r0, #(0x20 << 8)
+        bne     1f
+        /* If not CPU0, don't let CPU0 reset CPU1 now that CPU1 is coming up. */
+        mov32   r6, TEGRA_PMC_BASE
+        mov     r0, #0
+        cmp     r10, #0
+        strne   r0, [r6, #PMC_SCRATCH41]
+1:
+#endif
+
+        /* Waking up from LP2? */
+        ldr     r9, [r12, #RESET_DATA(MASK_LP2)]
+        tst     r9, r11                         @ if in_lp2
+        beq     __is_not_lp2
+        ldr     lr, [r12, #RESET_DATA(STARTUP_LP2)]
+        cmp     lr, #0
+        bleq    __die                           @ no LP2 startup handler
+        bx      lr
+
+__is_not_lp2:
+
+#ifdef CONFIG_SMP
+        /*
+         * Can only be secondary boot (initial or hotplug) but CPU 0
+         * cannot be here.
+         */
+        cmp     r10, #0
+        bleq    __die                           @ CPU0 cannot be here
+        ldr     lr, [r12, #RESET_DATA(STARTUP_SECONDARY)]
+        cmp     lr, #0
+        bleq    __die                           @ no secondary startup handler
+        bx      lr
+#endif
+
+/*
+ * We don't know why the CPU reset. Just kill it.
+ * The LR register will contain the address we died at + 4.
+ */
+
+__die:
+        sub     lr, lr, #4
+        mov32   r7, TEGRA_PMC_BASE
+        str     lr, [r7, #PMC_SCRATCH41]
+
+        mov32   r7, TEGRA_CLK_RESET_BASE
+
+        /* Are we on Tegra20? */
+        mov32   r6, TEGRA_APB_MISC_BASE
+        ldr     r0, [r6, #APB_MISC_GP_HIDREV]
+        and     r0, r0, #0xff00
+        cmp     r0, #(0x20 << 8)
+        bne     1f
+
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
+        mov32   r0, 0x1111
+        mov     r1, r0, lsl r10
+        str     r1, [r7, #0x340]                @ CLK_RST_CPU_CMPLX_SET
+#endif
+1:
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+        mov32   r6, TEGRA_FLOW_CTRL_BASE
+
+        cmp     r10, #0
+        moveq   r1, #FLOW_CTRL_HALT_CPU0_EVENTS
+        moveq   r2, #FLOW_CTRL_CPU0_CSR
+        movne   r1, r10, lsl #3
+        addne   r2, r1, #(FLOW_CTRL_CPU1_CSR-8)
+        addne   r1, r1, #(FLOW_CTRL_HALT_CPU1_EVENTS-8)
+
+        /* Clear CPU "event" and "interrupt" flags and power gate
+           it when halting but not before it is in the "WFI" state. */
+        ldr     r0, [r6, +r2]
+        orr     r0, r0, #FLOW_CTRL_CSR_INTR_FLAG | FLOW_CTRL_CSR_EVENT_FLAG
+        orr     r0, r0, #FLOW_CTRL_CSR_ENABLE
+        str     r0, [r6, +r2]
+
+        /* Unconditionally halt this CPU */
+        mov     r0, #FLOW_CTRL_WAITEVENT
+        str     r0, [r6, +r1]
+        ldr     r0, [r6, +r1]                   @ memory barrier
+
+        dsb
+        isb
+        wfi                                     @ CPU should be power gated here
+
+        /* If the CPU didn't power gate above just kill it's clock. */
+
+        mov     r0, r11, lsl #8
+        str     r0, [r7, #348]                  @ CLK_CPU_CMPLX_SET
+#endif
+
+        /* If the CPU still isn't dead, just spin here. */
+        b       .
+ENDPROC(__tegra_cpu_reset_handler)
+
+        .align L1_CACHE_SHIFT
+        .type   __tegra_cpu_reset_handler_data, %object
+        .globl  __tegra_cpu_reset_handler_data
+__tegra_cpu_reset_handler_data:
+        .rept   TEGRA_RESET_DATA_SIZE
+        .long   0
+        .endr
+        .align L1_CACHE_SHIFT
+
+ENTRY(__tegra_cpu_reset_handler_end)
diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c
index 3fd89ecd158e..1ac434e0068f 100644
--- a/arch/arm/mach-tegra/reset.c
+++ b/arch/arm/mach-tegra/reset.c
@@ -75,7 +75,7 @@ void __init tegra_cpu_reset_handler_init(void)
 
 #ifdef CONFIG_SMP
         __tegra_cpu_reset_handler_data[TEGRA_RESET_MASK_PRESENT] =
-                *((u32 *)cpu_present_mask);
+                *((u32 *)cpu_possible_mask);
         __tegra_cpu_reset_handler_data[TEGRA_RESET_STARTUP_SECONDARY] =
                 virt_to_phys((void *)tegra_secondary_startup);
 #endif
diff --git a/arch/arm/mach-tegra/sleep-tegra20.S b/arch/arm/mach-tegra/sleep-tegra20.S
index 72ce709799da..ad2ca07d0578 100644
--- a/arch/arm/mach-tegra/sleep-tegra20.S
+++ b/arch/arm/mach-tegra/sleep-tegra20.S
@@ -33,9 +33,6 @@
  * should never return
  */
 ENTRY(tegra20_hotplug_shutdown)
-        /* Turn off SMP coherency */
-        exit_smp r4, r5
-
         /* Put this CPU down */
         cpu_id  r0
         bl      tegra20_cpu_shutdown
diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S
index 562a8e7e413d..63a15bd9b653 100644
--- a/arch/arm/mach-tegra/sleep-tegra30.S
+++ b/arch/arm/mach-tegra/sleep-tegra30.S
@@ -32,9 +32,6 @@
  * Should never return.
  */
 ENTRY(tegra30_hotplug_shutdown)
-        /* Turn off SMP coherency */
-        exit_smp r4, r5
-
         /* Powergate this CPU */
         mov     r0, #TEGRA30_POWER_HOTPLUG_SHUTDOWN
         bl      tegra30_cpu_shutdown
diff --git a/arch/arm/mach-tegra/sleep.S b/arch/arm/mach-tegra/sleep.S
index 26afa7cbed11..addae357da3f 100644
--- a/arch/arm/mach-tegra/sleep.S
+++ b/arch/arm/mach-tegra/sleep.S
@@ -34,7 +34,7 @@
 #include "flowctrl.h"
 #include "sleep.h"
 
-#ifdef CONFIG_PM_SLEEP
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PM_SLEEP)
 /*
  * tegra_disable_clean_inv_dcache
  *
@@ -60,7 +60,9 @@ ENTRY(tegra_disable_clean_inv_dcache)
 
         ldmfd   sp!, {r0, r4-r5, r7, r9-r11, pc}
 ENDPROC(tegra_disable_clean_inv_dcache)
+#endif
 
+#ifdef CONFIG_PM_SLEEP
 /*
  * tegra_sleep_cpu_finish(unsigned long v2p)
  *
diff --git a/arch/arm/mach-tegra/sleep.h b/arch/arm/mach-tegra/sleep.h
index 9821ee725420..56505c381ea8 100644
--- a/arch/arm/mach-tegra/sleep.h
+++ b/arch/arm/mach-tegra/sleep.h
@@ -106,6 +106,7 @@ exit_l2_resume:
 #else
 void tegra_resume(void);
 int tegra_sleep_cpu_finish(unsigned long);
+void tegra_disable_clean_inv_dcache(void);
 
 #ifdef CONFIG_HOTPLUG_CPU
 void tegra20_hotplug_init(void);
diff --git a/arch/arm/mach-tegra/tegra30_clocks_data.c b/arch/arm/mach-tegra/tegra30_clocks_data.c
index 6942c7add3bb..741d264d5ecb 100644
--- a/arch/arm/mach-tegra/tegra30_clocks_data.c
+++ b/arch/arm/mach-tegra/tegra30_clocks_data.c
@@ -1183,7 +1183,7 @@ static struct clk tegra_dsib = {
         .num_parents = ARRAY_SIZE(mux_plld_out0_plld2_out0),
 };
 
-struct clk *tegra_list_clks[] = {
+static struct clk *tegra_list_clks[] = {
         &tegra_apbdma,
         &tegra_rtc,
         &tegra_kbc,
@@ -1289,7 +1289,7 @@ struct clk *tegra_list_clks[] = {
  * configuration.  List those here to register them twice in the clock lookup
  * table under two names.
  */
-struct clk_duplicate tegra_clk_duplicates[] = {
+static struct clk_duplicate tegra_clk_duplicates[] = {
         CLK_DUPLICATE("uarta",  "serial8250.0", NULL),
         CLK_DUPLICATE("uartb",  "serial8250.1", NULL),
         CLK_DUPLICATE("uartc",  "serial8250.2", NULL),
@@ -1340,7 +1340,7 @@ struct clk_duplicate tegra_clk_duplicates[] = {
         CLK_DUPLICATE("pll_d2_out0", "hdmi", "parent"),
 };
 
-struct clk *tegra_ptr_clks[] = {
+static struct clk *tegra_ptr_clks[] = {
         &tegra_clk_32k,
         &tegra_clk_m,
         &tegra_clk_m_div2,
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 4ce77cdc31cc..12060ae4e8f1 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -31,11 +31,11 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/clk-u300.h>
 #include <linux/platform_data/pinctrl-coh901.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach/map.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -1779,8 +1779,7 @@ MACHINE_START(U300, "Ericsson AB U335 S335/B335 Prototype Board")
         .map_io         = u300_map_io,
         .nr_irqs        = 0,
         .init_irq       = u300_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &u300_timer,
+        .init_time      = u300_timer_init,
         .init_machine   = u300_init_machine,
         .restart        = u300_restart,
 MACHINE_END
diff --git a/arch/arm/mach-u300/include/mach/uncompress.h b/arch/arm/mach-u300/include/mach/uncompress.h
index 29acb718acf7..783e7e60101b 100644
--- a/arch/arm/mach-u300/include/mach/uncompress.h
+++ b/arch/arm/mach-u300/include/mach/uncompress.h
@@ -43,4 +43,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index 1da10e20e996..d9e73209c9b8 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -349,7 +349,7 @@ static u32 notrace u300_read_sched_clock(void)
 /*
  * This sets up the system timers, clock source and clock event.
  */
-static void __init u300_timer_init(void)
+void __init u300_timer_init(void)
 {
         struct clk *clk;
         unsigned long rate;
@@ -413,11 +413,3 @@ static void __init u300_timer_init(void)
          * used by hrtimers!
          */
 }
-
-/*
- * Very simple system timer that only register the clock event and
- * clock source.
- */
-struct sys_timer u300_timer = {
-        .init           = u300_timer_init,
-};
diff --git a/arch/arm/mach-u300/timer.h b/arch/arm/mach-u300/timer.h
index b5e9791762e0..d34287bc34f5 100644
--- a/arch/arm/mach-u300/timer.h
+++ b/arch/arm/mach-u300/timer.h
@@ -1 +1 @@
-extern struct sys_timer u300_timer;
+extern void u300_timer_init(void);
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
index 1f47d962e3a1..7037d3687e9f 100644
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ b/arch/arm/mach-ux500/board-mop500-uib.c
@@ -13,6 +13,7 @@
 
 #include <mach/hardware.h>
 #include "board-mop500.h"
+#include "id.h"
 
 enum mop500_uib {
         STUIB,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index b8781caa54b8..3868aa4ff15e 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -40,7 +40,6 @@
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -197,7 +196,7 @@ static struct platform_device snowball_sbnet_dev = {
         },
 };
 
-static struct ab8500_platform_data ab8500_platdata = {
+struct ab8500_platform_data ab8500_platdata = {
         .irq_base       = MOP500_AB8500_IRQ_BASE,
         .regulator_reg_init = ab8500_regulator_reg_init,
         .num_regulator_reg_init = ARRAY_SIZE(ab8500_regulator_reg_init),
@@ -633,6 +632,7 @@ static void __init mop500_init_machine(void)
         int i2c0_devs;
         int i;
 
+        platform_device_register(&db8500_prcmu_device);
         mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
 
         mop500_pinmaps_init();
@@ -667,6 +667,7 @@ static void __init snowball_init_machine(void)
         struct device *parent = NULL;
         int i;
 
+        platform_device_register(&db8500_prcmu_device);
         snowball_pinmaps_init();
         parent = u8500_init_devices(&ab8500_platdata);
 
@@ -692,6 +693,7 @@ static void __init hrefv60_init_machine(void)
         int i2c0_devs;
         int i;
 
+        platform_device_register(&db8500_prcmu_device);
         /*
          * The HREFv60 board removed a GPIO expander and routed
          * all these GPIO pins to the internal GPIO controller
@@ -733,8 +735,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
-        .timer          = &ux500_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = ux500_timer_init,
         .init_machine   = mop500_init_machine,
         .init_late      = ux500_init_late,
 MACHINE_END
@@ -743,8 +744,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
         .atag_offset    = 0x100,
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
-        .timer          = &ux500_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = ux500_timer_init,
         .init_machine   = mop500_init_machine,
         .init_late      = ux500_init_late,
 MACHINE_END
@@ -754,8 +754,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
         .smp            = smp_ops(ux500_smp_ops),
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
-        .timer          = &ux500_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = ux500_timer_init,
         .init_machine   = hrefv60_init_machine,
         .init_late      = ux500_init_late,
 MACHINE_END
@@ -766,8 +765,7 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
-        .timer          = &ux500_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = ux500_timer_init,
         .init_machine   = snowball_init_machine,
         .init_late      = NULL,
 MACHINE_END
diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c
index 75d5b512a3d5..1c1609da76ce 100644
--- a/arch/arm/mach-ux500/cache-l2x0.c
+++ b/arch/arm/mach-ux500/cache-l2x0.c
@@ -10,7 +10,8 @@
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <mach/hardware.h>
-#include <mach/id.h>
+
+#include "id.h"
 
 static void __iomem *l2x0_base;
 
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index b80ad9610e97..19235cf7bbe3 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -27,7 +27,6 @@
 #include <asm/pmu.h>
 #include <asm/mach/map.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware/gic.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
@@ -37,7 +36,9 @@
 
 #include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
+
 #include "board-mop500.h"
+#include "id.h"
 
 /* minimum static i/o mapping required to boot U8500 platforms */
 static struct map_desc u8500_uart_io_desc[] __initdata = {
@@ -137,14 +138,9 @@ static struct platform_device db8500_pmu_device = {
         .dev.platform_data      = &db8500_pmu_platdata,
 };
 
-static struct platform_device db8500_prcmu_device = {
-        .name                   = "db8500-prcmu",
-};
-
 static struct platform_device *platform_devs[] __initdata = {
         &u8500_dma40_device,
         &db8500_pmu_device,
-        &db8500_prcmu_device,
 };
 
 static resource_size_t __initdata db8500_gpio_base[] = {
@@ -284,6 +280,8 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
         OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
         OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
         OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
+        OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
+                        &db8500_prcmu_pdata),
         /* Requires device name bindings. */
         OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE,
                 "pinctrl-db8500", NULL),
@@ -341,8 +339,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
         .map_io         = u8500_map_io,
         .init_irq       = ux500_init_irq,
         /* we re-use nomadik timer here */
-        .timer          = &ux500_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = ux500_timer_init,
         .init_machine   = u8500_init_machine,
         .init_late      = NULL,
         .dt_compat      = stericsson_dt_platform_compat,
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index d4dcec53171a..537870d3fea8 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -17,9 +17,10 @@
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/platform_data/clk-ux500.h>
 
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include <mach/hardware.h>
@@ -27,6 +28,7 @@
 #include <mach/devices.h>
 
 #include "board-mop500.h"
+#include "id.h"
 
 void __iomem *_PRCMU_BASE;
 
@@ -42,11 +44,6 @@ void __iomem *_PRCMU_BASE;
  * This feels fragile because it depends on the gpio device getting probed
  * _before_ any device uses the gpio interrupts.
 */
-static const struct of_device_id ux500_dt_irq_match[] = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        {},
-};
-
 void __init ux500_init_irq(void)
 {
         void __iomem *dist_base;
@@ -62,7 +59,7 @@ void __init ux500_init_irq(void)
 
 #ifdef CONFIG_OF
         if (of_have_populated_dt())
-                of_irq_init(ux500_dt_irq_match);
+                irqchip_init();
         else
 #endif
                 gic_init(0, 29, dist_base, cpu_base);
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index 318d49020894..f3d9419f75d3 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -13,11 +13,13 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/platform_data/dma-ste-dma40.h>
+#include <linux/mfd/dbx500-prcmu.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/irqs.h>
 
+#include "devices-db8500.h"
 #include "ste-dma40-db8500.h"
 
 static struct resource dma40_resources[] = {
@@ -194,3 +196,45 @@ struct platform_device u8500_ske_keypad_device = {
         .num_resources = ARRAY_SIZE(keypad_resources),
         .resource = keypad_resources,
 };
+
+struct prcmu_pdata db8500_prcmu_pdata = {
+        .ab_platdata    = &ab8500_platdata,
+        .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET,
+        .legacy_offset  = DB8500_PRCMU_LEGACY_OFFSET,
+};
+
+static struct resource db8500_prcmu_res[] = {
+        {
+                .name  = "prcmu",
+                .start = U8500_PRCMU_BASE,
+                .end   = U8500_PRCMU_BASE + SZ_8K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .name  = "prcmu-tcdm",
+                .start = U8500_PRCMU_TCDM_BASE,
+                .end   = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+        {
+                .name  = "irq",
+                .start = IRQ_DB8500_PRCMU1,
+                .end   = IRQ_DB8500_PRCMU1,
+                .flags = IORESOURCE_IRQ,
+        },
+        {
+                .name  = "prcmu-tcpm",
+                .start = U8500_PRCMU_TCPM_BASE,
+                .end   = U8500_PRCMU_TCPM_BASE + SZ_4K - 1,
+                .flags = IORESOURCE_MEM,
+        },
+};
+
+struct platform_device db8500_prcmu_device = {
+        .name                   = "db8500-prcmu",
+        .resource               = db8500_prcmu_res,
+        .num_resources          = ARRAY_SIZE(db8500_prcmu_res),
+        .dev = {
+                .platform_data = &db8500_prcmu_pdata,
+        },
+};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index a5e05f6e256f..dbcb35c48f06 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -14,6 +14,11 @@
 
 struct ske_keypad_platform_data;
 struct pl022_ssp_controller;
+struct platform_device;
+
+extern struct ab8500_platform_data ab8500_platdata;
+extern struct prcmu_pdata db8500_prcmu_pdata;
+extern struct platform_device db8500_prcmu_device;
 
 static inline struct platform_device *
 db8500_add_ske_keypad(struct device *parent,
diff --git a/arch/arm/mach-ux500/id.c b/arch/arm/mach-ux500/id.c
index d1579920139f..9f951842e1e5 100644
--- a/arch/arm/mach-ux500/id.c
+++ b/arch/arm/mach-ux500/id.c
@@ -17,6 +17,8 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "id.h"
+
 struct dbx500_asic_id dbx500_id;
 
 static unsigned int ux500_read_asicid(phys_addr_t addr)
diff --git a/arch/arm/mach-ux500/include/mach/id.h b/arch/arm/mach-ux500/id.h
index 9c42642ab168..bcc58a8cccbc 100644
--- a/arch/arm/mach-ux500/include/mach/id.h
+++ b/arch/arm/mach-ux500/id.h
@@ -61,9 +61,14 @@ static inline bool __attribute_const__ cpu_is_u8540(void)
         return dbx500_partnumber() == 0x8540;
 }
 
+static inline bool __attribute_const__ cpu_is_u8580(void)
+{
+        return dbx500_partnumber() == 0x8580;
+}
+
 static inline bool cpu_is_ux540_family(void)
 {
-        return cpu_is_u9540() || cpu_is_u8540();
+        return cpu_is_u9540() || cpu_is_u8540() || cpu_is_u8580();
 }
 
 /*
@@ -115,6 +120,20 @@ static inline bool cpu_is_u8500v20_or_later(void)
         return (cpu_is_u8500() && !cpu_is_u8500v10() && !cpu_is_u8500v11());
 }
 
+/*
+ * 8540 revisions
+ */
+
+static inline bool __attribute_const__ cpu_is_u8540v10(void)
+{
+        return cpu_is_u8540() && dbx500_revision() == 0xA0;
+}
+
+static inline bool __attribute_const__ cpu_is_u8580v10(void)
+{
+        return cpu_is_u8580() && dbx500_revision() == 0xA0;
+}
+
 static inline bool ux500_is_svp(void)
 {
         return false;
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
index 28d16e744bfd..5201ddace503 100644
--- a/arch/arm/mach-ux500/include/mach/hardware.h
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -39,7 +39,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <mach/id.h>
 extern void __iomem *_PRCMU_BASE;
 
 #define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
index 6be4c4d2ab88..bddce2b49372 100644
--- a/arch/arm/mach-ux500/include/mach/setup.h
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -28,8 +28,7 @@ extern struct device *ux500_soc_device_init(const char *soc_id);
 struct amba_device;
 extern void __init amba_add_devices(struct amba_device *devs[], int num);
 
-struct sys_timer;
-extern struct sys_timer ux500_timer;
+extern void ux500_timer_init(void);
 
 #define __IO_DEV_DESC(x, sz)    {               \
         .virtual        = IO_ADDRESS(x),        \
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index d60ecd1753f0..36969d52e53a 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -54,6 +54,4 @@ static inline void arch_decomp_setup(void)
         ux500_uart_base = (void __iomem *)U8500_UART2_BASE;
 }
 
-#define arch_decomp_wdog() /* nothing to do here */
-
 #endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index 3db7782f3afb..18f7af339dc9 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -16,14 +16,17 @@
 #include <linux/device.h>
 #include <linux/smp.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_scu.h>
+
 #include <mach/hardware.h>
 #include <mach/setup.h>
 
+#include "id.h"
+
 /* This is called from headsmp.S to wakeup the secondary core */
 extern void u8500_secondary_startup(void);
 
@@ -91,7 +94,7 @@ static int __cpuinit ux500_boot_secondary(unsigned int cpu, struct task_struct *
          */
         write_pen_release(cpu_logical_map(cpu));
 
-        smp_send_reschedule(cpu);
+        arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
         timeout = jiffies + (1 * HZ);
         while (time_before(jiffies, timeout)) {
@@ -155,8 +158,6 @@ static void __init ux500_smp_init_cpus(void)
 
         for (i = 0; i < ncores; i++)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init ux500_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index 875309acb022..a6af0b8732ba 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -17,6 +17,8 @@
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 
+#include "id.h"
+
 #ifdef CONFIG_HAVE_ARM_TWD
 static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer,
                               U8500_TWD_BASE, IRQ_LOCALTIMER);
@@ -46,7 +48,7 @@ const static struct of_device_id prcmu_timer_of_match[] __initconst = {
         { },
 };
 
-static void __init ux500_timer_init(void)
+void __init ux500_timer_init(void)
 {
         void __iomem *mtu_timer_base;
         void __iomem *prcmu_timer_base;
@@ -99,14 +101,3 @@ dt_fail:
         clksrc_dbx500_prcmu_init(prcmu_timer_base);
         ux500_twd_init();
 }
-
-static void ux500_timer_reset(void)
-{
-        nmdk_clkevt_reset();
-        nmdk_clksrc_reset();
-}
-
-struct sys_timer ux500_timer = {
-        .init           = ux500_timer_init,
-        .resume         = ux500_timer_reset,
-};
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 43478c299cc8..25160aeaa3b7 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -32,6 +32,7 @@
 #include <linux/amba/mmci.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
+#include <linux/irqchip/arm-vic.h>
 #include <linux/irqchip/versatile-fpga.h>
 #include <linux/gfp.h>
 #include <linux/clkdev.h>
@@ -41,7 +42,6 @@
 #include <asm/irq.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -783,7 +783,7 @@ void __init versatile_init(void)
 /*
  * Set up timer interrupt, and return the current time in seconds.
  */
-static void __init versatile_timer_init(void)
+void __init versatile_timer_init(void)
 {
         u32 val;
 
@@ -810,8 +810,3 @@ static void __init versatile_timer_init(void)
         sp804_clocksource_init(TIMER3_VA_BASE, "timer3");
         sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMERINT0_1, "timer0");
 }
-
-struct sys_timer versatile_timer = {
-        .init           = versatile_timer_init,
-};
-
diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h
index 683e60776a85..5c1b87d1da6b 100644
--- a/arch/arm/mach-versatile/core.h
+++ b/arch/arm/mach-versatile/core.h
@@ -29,7 +29,7 @@ extern void __init versatile_init(void);
 extern void __init versatile_init_early(void);
 extern void __init versatile_init_irq(void);
 extern void __init versatile_map_io(void);
-extern struct sys_timer versatile_timer;
+extern void versatile_timer_init(void);
 extern void versatile_restart(char, const char *);
 extern unsigned int mmc_status(struct device *dev);
 #ifdef CONFIG_OF
diff --git a/arch/arm/mach-versatile/include/mach/uncompress.h b/arch/arm/mach-versatile/include/mach/uncompress.h
index 3dd0048afb34..986e3d303f3c 100644
--- a/arch/arm/mach-versatile/include/mach/uncompress.h
+++ b/arch/arm/mach-versatile/include/mach/uncompress.h
@@ -43,4 +43,3 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index 98f65493177a..1caef1093793 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -26,7 +26,6 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
@@ -39,8 +38,7 @@ MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &versatile_timer,
+        .init_time      = versatile_timer_init,
         .init_machine   = versatile_init,
         .restart        = versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c
index ae5ad3c8f3dd..2558f2e957c3 100644
--- a/arch/arm/mach-versatile/versatile_dt.c
+++ b/arch/arm/mach-versatile/versatile_dt.c
@@ -24,7 +24,6 @@
 #include <linux/init.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <asm/hardware/vic.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
@@ -46,8 +45,7 @@ DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)")
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &versatile_timer,
+        .init_time      = versatile_timer_init,
         .init_machine   = versatile_dt_init,
         .dt_compat      = versatile_dt_match,
         .restart        = versatile_restart,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 19738331bd3d..611d140c8695 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -27,7 +27,6 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <asm/hardware/vic.h>
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
@@ -107,8 +106,7 @@ MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
         .map_io         = versatile_map_io,
         .init_early     = versatile_init_early,
         .init_irq       = versatile_init_irq,
-        .handle_irq     = vic_handle_irq,
-        .timer          = &versatile_timer,
+        .init_time      = versatile_timer_init,
         .init_machine   = versatile_pb_init,
         .restart        = versatile_restart,
 MACHINE_END
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 60838ddb8564..6f34497a4245 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -10,10 +10,10 @@
 #include <linux/amba/clcd.h>
 #include <linux/clkdev.h>
 #include <linux/vexpress.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/smp_scu.h>
 #include <asm/smp_twd.h>
 
@@ -182,8 +182,6 @@ static void __init ct_ca9x4_init_cpu_map(void)
 
         for (i = 0; i < ncores; ++i)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index c5d70de9bb4e..dc1ace55d557 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -16,7 +16,6 @@
 #include <linux/vexpress.h>
 
 #include <asm/smp_scu.h>
-#include <asm/hardware/gic.h>
 #include <asm/mach/map.h>
 
 #include <mach/motherboard.h>
@@ -128,8 +127,6 @@ static void __init vexpress_dt_smp_init_cpus(void)
 
         for (i = 0; i < ncores; ++i)
                 set_cpu_possible(i, true);
-
-        set_smp_cross_call(gic_raise_softirq);
 }
 
 static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 011661a6c5cb..915683cb67d6 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -7,6 +7,7 @@
 #include <linux/io.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/irqchip.h>
 #include <linux/of_address.h>
 #include <linux/of_fdt.h>
 #include <linux/of_irq.h>
@@ -30,7 +31,6 @@
 #include <asm/mach/time.h>
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/timer-sp.h>
 
 #include <mach/ct-ca9x4.h>
@@ -291,10 +291,6 @@ static void __init v2m_timer_init(void)
         v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
 }
 
-static struct sys_timer v2m_timer = {
-        .init   = v2m_timer_init,
-};
-
 static void __init v2m_init_early(void)
 {
         if (ct_desc->init_early)
@@ -376,8 +372,7 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
         .map_io         = v2m_map_io,
         .init_early     = v2m_init_early,
         .init_irq       = v2m_init_irq,
-        .timer          = &v2m_timer,
-        .handle_irq     = gic_handle_irq,
+        .init_time      = v2m_timer_init,
         .init_machine   = v2m_init,
         .restart        = vexpress_restart,
 MACHINE_END
@@ -434,16 +429,6 @@ void __init v2m_dt_init_early(void)
         }
 }
 
-static  struct of_device_id vexpress_irq_match[] __initdata = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        {}
-};
-
-static void __init v2m_dt_init_irq(void)
-{
-        of_irq_init(vexpress_irq_match);
-}
-
 static void __init v2m_dt_timer_init(void)
 {
         struct device_node *node = NULL;
@@ -468,10 +453,6 @@ static void __init v2m_dt_timer_init(void)
                                 24000000);
 }
 
-static struct sys_timer v2m_dt_timer = {
-        .init = v2m_dt_timer_init,
-};
-
 static const struct of_device_id v2m_dt_bus_match[] __initconst = {
         { .compatible = "simple-bus", },
         { .compatible = "arm,amba-bus", },
@@ -497,9 +478,8 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
         .smp            = smp_ops(vexpress_smp_ops),
         .map_io         = v2m_dt_map_io,
         .init_early     = v2m_dt_init_early,
-        .init_irq       = v2m_dt_init_irq,
-        .timer          = &v2m_dt_timer,
+        .init_irq       = irqchip_init,
+        .init_time      = v2m_dt_timer_init,
         .init_machine   = v2m_dt_init,
-        .handle_irq     = gic_handle_irq,
         .restart        = vexpress_restart,
 MACHINE_END
diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
index 2ed0b7d95db6..9adcb9e76f54 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -4,9 +4,10 @@ config ARCH_VT8500
         select ARCH_HAS_CPUFREQ
         select ARCH_REQUIRE_GPIOLIB
         select CLKDEV_LOOKUP
+        select CLKSRC_OF
         select CPU_ARM926T
         select GENERIC_CLOCKEVENTS
-        select GENERIC_GPIO
         select HAVE_CLK
+        select VT8500_TIMER
         help
           Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
diff --git a/arch/arm/mach-vt8500/Makefile b/arch/arm/mach-vt8500/Makefile
index e035251cda48..92ceb2436b60 100644
--- a/arch/arm/mach-vt8500/Makefile
+++ b/arch/arm/mach-vt8500/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_ARCH_VT8500) += irq.o timer.o vt8500.o
+obj-$(CONFIG_ARCH_VT8500) += irq.o vt8500.o
diff --git a/arch/arm/mach-vt8500/common.h b/arch/arm/mach-vt8500/common.h
index 6f2b843115db..77611a6968d6 100644
--- a/arch/arm/mach-vt8500/common.h
+++ b/arch/arm/mach-vt8500/common.h
@@ -18,7 +18,6 @@
 
 #include <linux/of.h>
 
-void __init vt8500_timer_init(void);
 int __init vt8500_irq_init(struct device_node *node,
                                 struct device_node *parent);
 
diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h
index e6e81fdaf109..5b4f19ecb4cc 100644
--- a/arch/arm/mach-vt8500/include/mach/uncompress.h
+++ b/arch/arm/mach-vt8500/include/mach/uncompress.h
@@ -34,4 +34,3 @@ static void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c
index 3c66d48ea082..fe99b709f11f 100644
--- a/arch/arm/mach-vt8500/vt8500.c
+++ b/arch/arm/mach-vt8500/vt8500.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/pm.h>
 
@@ -175,10 +176,6 @@ static void __init vt8500_init_irq(void)
         of_irq_init(vt8500_irq_match);
 };
 
-static struct sys_timer vt8500_timer = {
-        .init = vt8500_timer_init,
-};
-
 static const char * const vt8500_dt_compat[] = {
         "via,vt8500",
         "wm,wm8650",
@@ -189,8 +186,8 @@ DT_MACHINE_START(WMT_DT, "VIA/Wondermedia SoC (Device Tree Support)")
         .dt_compat      = vt8500_dt_compat,
         .map_io         = vt8500_map_io,
         .init_irq       = vt8500_init_irq,
-        .timer          = &vt8500_timer,
         .init_machine   = vt8500_init,
+        .init_time      = clocksource_of_init,
         .restart        = vt8500_restart,
         .handle_irq     = vt8500_handle_irq,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h
index 03130212ace2..4b7c324ff664 100644
--- a/arch/arm/mach-w90x900/include/mach/uncompress.h
+++ b/arch/arm/mach-w90x900/include/mach/uncompress.h
@@ -24,8 +24,6 @@
 #include <mach/map.h>
 #include <linux/serial_reg.h>
 
-#define arch_decomp_wdog()
-
 #define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
 static volatile u32 * const uart_base = (u32 *)UART0_PA;
 
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index b4243e4f1565..92f1c978f35e 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -37,6 +37,6 @@ MACHINE_START(W90P910EVB, "W90P910EVB")
         .map_io         = nuc910evb_map_io,
         .init_irq       = nuc900_init_irq,
         .init_machine   = nuc910evb_init,
-        .timer          = &nuc900_timer,
+        .init_time      = nuc900_timer_init,
         .restart        = nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 500fe5932ce9..26f7189056e3 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -40,6 +40,6 @@ MACHINE_START(W90P950EVB, "W90P950EVB")
         .map_io         = nuc950evb_map_io,
         .init_irq       = nuc900_init_irq,
         .init_machine   = nuc950evb_init,
-        .timer          = &nuc900_timer,
+        .init_time      = nuc900_timer_init,
         .restart        = nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index cbb3adc3db10..9b4e73fe10e5 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -37,6 +37,6 @@ MACHINE_START(W90N960EVB, "W90N960EVB")
         .map_io         = nuc960evb_map_io,
         .init_irq       = nuc900_init_irq,
         .init_machine   = nuc960evb_init,
-        .timer          = &nuc900_timer,
+        .init_time      = nuc900_timer_init,
         .restart        = nuc9xx_restart,
 MACHINE_END
diff --git a/arch/arm/mach-w90x900/nuc9xx.h b/arch/arm/mach-w90x900/nuc9xx.h
index 91acb4047793..88ef4b267089 100644
--- a/arch/arm/mach-w90x900/nuc9xx.h
+++ b/arch/arm/mach-w90x900/nuc9xx.h
@@ -15,10 +15,9 @@
  *
  */
 struct map_desc;
-struct sys_timer;
 
 /* core initialisation functions */
 
 extern void nuc900_init_irq(void);
-extern struct sys_timer nuc900_timer;
+extern void nuc900_timer_init(void);
 extern void nuc9xx_restart(char, const char *);
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index fa27c498ac09..30fbca844575 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -91,7 +91,6 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
 
 static struct clock_event_device nuc900_clockevent_device = {
         .name           = "nuc900-timer0",
-        .shift          = 32,
         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
         .set_mode       = nuc900_clockevent_setmode,
         .set_next_event = nuc900_clockevent_setnextevent,
@@ -133,15 +132,10 @@ static void __init nuc900_clockevents_init(void)
         __raw_writel(RESETINT, REG_TISR);
         setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
 
-        nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
-                                        nuc900_clockevent_device.shift);
-        nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
-                                        &nuc900_clockevent_device);
-        nuc900_clockevent_device.min_delta_ns = clockevent_delta2ns(0xf,
-                                        &nuc900_clockevent_device);
         nuc900_clockevent_device.cpumask = cpumask_of(0);
 
-        clockevents_register_device(&nuc900_clockevent_device);
+        clockevents_config_and_register(&nuc900_clockevent_device, rate,
+                                        0xf, 0xffffffff);
 }
 
 static void __init nuc900_clocksource_init(void)
@@ -167,12 +161,8 @@ static void __init nuc900_clocksource_init(void)
                 TDR_SHIFT, clocksource_mmio_readl_down);
 }
 
-static void __init nuc900_timer_init(void)
+void __init nuc900_timer_init(void)
 {
         nuc900_clocksource_init();
         nuc900_clockevents_init();
 }
-
-struct sys_timer nuc900_timer = {
-        .init           = nuc900_timer_init,
-};
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index e16d4bed0f7a..5c8983218183 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -24,6 +24,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -31,7 +32,6 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
@@ -55,19 +55,6 @@ static void __init xilinx_init_machine(void)
         of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
 }
 
-static struct of_device_id irq_match[] __initdata = {
-        { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-        { }
-};
-
-/**
- * xilinx_irq_init() - Interrupt controller initialization for the GIC.
- */
-static void __init xilinx_irq_init(void)
-{
-        of_irq_init(irq_match);
-}
-
 #define SCU_PERIPH_PHYS         0xF8F00000
 #define SCU_PERIPH_SIZE         SZ_8K
 #define SCU_PERIPH_VIRT         (VMALLOC_END - SCU_PERIPH_SIZE)
@@ -90,16 +77,9 @@ static void __init xilinx_zynq_timer_init(void)
 
         xilinx_zynq_clocks_init(slcr);
 
-        xttcpss_timer_init();
+        xttcps_timer_init();
 }
 
-/*
- * Instantiate and initialize the system timer structure
- */
-static struct sys_timer xttcpss_sys_timer = {
-        .init           = xilinx_zynq_timer_init,
-};
-
 /**
  * xilinx_map_io() - Create memory mappings needed for early I/O.
  */
@@ -117,9 +97,8 @@ static const char *xilinx_dt_match[] = {
 
 MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
         .map_io         = xilinx_map_io,
-        .init_irq       = xilinx_irq_init,
-        .handle_irq     = gic_handle_irq,
+        .init_irq       = irqchip_init,
         .init_machine   = xilinx_init_machine,
-        .timer          = &xttcpss_sys_timer,
+        .init_time      = xilinx_zynq_timer_init,
         .dt_compat      = xilinx_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 954b91c13c91..8b4dbbaa01cf 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,6 +17,6 @@
 #ifndef __MACH_ZYNQ_COMMON_H__
 #define __MACH_ZYNQ_COMMON_H__
 
-void __init xttcpss_timer_init(void);
+void __init xttcps_timer_init(void);
 
 #endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index de3df283da74..f9fbc9c1e7a6 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -15,39 +15,29 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
-
 #include "common.h"
 
 /*
  * Timer Register Offset Definitions of Timer 1, Increment base address by 4
  * and use same offsets for Timer 2
  */
-#define XTTCPSS_CLK_CNTRL_OFFSET        0x00 /* Clock Control Reg, RW */
-#define XTTCPSS_CNT_CNTRL_OFFSET        0x0C /* Counter Control Reg, RW */
-#define XTTCPSS_COUNT_VAL_OFFSET        0x18 /* Counter Value Reg, RO */
-#define XTTCPSS_INTR_VAL_OFFSET         0x24 /* Interval Count Reg, RW */
-#define XTTCPSS_MATCH_1_OFFSET          0x30 /* Match 1 Value Reg, RW */
-#define XTTCPSS_MATCH_2_OFFSET          0x3C /* Match 2 Value Reg, RW */
-#define XTTCPSS_MATCH_3_OFFSET          0x48 /* Match 3 Value Reg, RW */
-#define XTTCPSS_ISR_OFFSET              0x54 /* Interrupt Status Reg, RO */
-#define XTTCPSS_IER_OFFSET              0x60 /* Interrupt Enable Reg, RW */
-
-#define XTTCPSS_CNT_CNTRL_DISABLE_MASK  0x1
-
-/* Setup the timers to use pre-scaling, using a fixed value for now that will
+#define XTTCPS_CLK_CNTRL_OFFSET         0x00 /* Clock Control Reg, RW */
+#define XTTCPS_CNT_CNTRL_OFFSET         0x0C /* Counter Control Reg, RW */
+#define XTTCPS_COUNT_VAL_OFFSET         0x18 /* Counter Value Reg, RO */
+#define XTTCPS_INTR_VAL_OFFSET          0x24 /* Interval Count Reg, RW */
+#define XTTCPS_ISR_OFFSET               0x54 /* Interrupt Status Reg, RO */
+#define XTTCPS_IER_OFFSET               0x60 /* Interrupt Enable Reg, RW */
+
+#define XTTCPS_CNT_CNTRL_DISABLE_MASK   0x1
+
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
  * work across most input frequency, but it may need to be more dynamic
  */
 #define PRESCALE_EXPONENT       11      /* 2 ^ PRESCALE_EXPONENT = PRESCALE */
@@ -57,72 +47,73 @@
 #define CNT_CNTRL_RESET         (1<<4)
 
 /**
- * struct xttcpss_timer - This definition defines local timer structure
+ * struct xttcps_timer - This definition defines local timer structure
  *
  * @base_addr:  Base address of timer
  **/
-struct xttcpss_timer {
+struct xttcps_timer {
         void __iomem    *base_addr;
 };
 
-struct xttcpss_timer_clocksource {
-        struct xttcpss_timer    xttc;
+struct xttcps_timer_clocksource {
+        struct xttcps_timer     xttc;
         struct clocksource      cs;
 };
 
-#define to_xttcpss_timer_clksrc(x) \
-                container_of(x, struct xttcpss_timer_clocksource, cs)
+#define to_xttcps_timer_clksrc(x) \
+                container_of(x, struct xttcps_timer_clocksource, cs)
 
-struct xttcpss_timer_clockevent {
-        struct xttcpss_timer            xttc;
+struct xttcps_timer_clockevent {
+        struct xttcps_timer             xttc;
         struct clock_event_device       ce;
         struct clk                      *clk;
 };
 
-#define to_xttcpss_timer_clkevent(x) \
-                container_of(x, struct xttcpss_timer_clockevent, ce)
+#define to_xttcps_timer_clkevent(x) \
+                container_of(x, struct xttcps_timer_clockevent, ce)
 
 /**
- * xttcpss_set_interval - Set the timer interval value
+ * xttcps_set_interval - Set the timer interval value
  *
  * @timer:      Pointer to the timer instance
  * @cycles:     Timer interval ticks
  **/
-static void xttcpss_set_interval(struct xttcpss_timer *timer,
+static void xttcps_set_interval(struct xttcps_timer *timer,
                                         unsigned long cycles)
 {
         u32 ctrl_reg;
 
         /* Disable the counter, set the counter value  and re-enable counter */
-        ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-        ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-        __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+        ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
+        ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
+        __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 
-        __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
+        __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
 
-        /* Reset the counter (0x10) so that it starts from 0, one-shot
-           mode makes this needed for timing to be right. */
+        /*
+         * Reset the counter (0x10) so that it starts from 0, one-shot
+         * mode makes this needed for timing to be right.
+         */
         ctrl_reg |= CNT_CNTRL_RESET;
-        ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-        __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+        ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
+        __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 }
 
 /**
- * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
+ * xttcps_clock_event_interrupt - Clock event timer interrupt handler
  *
  * @irq:        IRQ number of the Timer
- * @dev_id:     void pointer to the xttcpss_timer instance
+ * @dev_id:     void pointer to the xttcps_timer instance
  *
  * returns: Always IRQ_HANDLED - success
  **/
-static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
+static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
 {
-        struct xttcpss_timer_clockevent *xttce = dev_id;
-        struct xttcpss_timer *timer = &xttce->xttc;
+        struct xttcps_timer_clockevent *xttce = dev_id;
+        struct xttcps_timer *timer = &xttce->xttc;
 
         /* Acknowledge the interrupt and call event handler */
-        __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
-                        timer->base_addr + XTTCPSS_ISR_OFFSET);
+        __raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
 
         xttce->ce.event_handler(&xttce->ce);
 
@@ -136,46 +127,46 @@ static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
  **/
 static cycle_t __xttc_clocksource_read(struct clocksource *cs)
 {
-        struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc;
+        struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
 
         return (cycle_t)__raw_readl(timer->base_addr +
-                                XTTCPSS_COUNT_VAL_OFFSET);
+                                XTTCPS_COUNT_VAL_OFFSET);
 }
 
 /**
- * xttcpss_set_next_event - Sets the time interval for next event
+ * xttcps_set_next_event - Sets the time interval for next event
  *
  * @cycles:     Timer interval ticks
  * @evt:        Address of clock event instance
  *
  * returns: Always 0 - success
  **/
-static int xttcpss_set_next_event(unsigned long cycles,
+static int xttcps_set_next_event(unsigned long cycles,
                                         struct clock_event_device *evt)
 {
-        struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
-        struct xttcpss_timer *timer = &xttce->xttc;
+        struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+        struct xttcps_timer *timer = &xttce->xttc;
 
-        xttcpss_set_interval(timer, cycles);
+        xttcps_set_interval(timer, cycles);
         return 0;
 }
 
 /**
- * xttcpss_set_mode - Sets the mode of timer
+ * xttcps_set_mode - Sets the mode of timer
  *
  * @mode:       Mode to be set
  * @evt:        Address of clock event instance
  **/
-static void xttcpss_set_mode(enum clock_event_mode mode,
+static void xttcps_set_mode(enum clock_event_mode mode,
                                         struct clock_event_device *evt)
 {
-        struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
-        struct xttcpss_timer *timer = &xttce->xttc;
+        struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+        struct xttcps_timer *timer = &xttce->xttc;
         u32 ctrl_reg;
 
         switch (mode) {
         case CLOCK_EVT_MODE_PERIODIC:
-                xttcpss_set_interval(timer,
+                xttcps_set_interval(timer,
                                      DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
                                                        PRESCALE * HZ));
                 break;
@@ -183,17 +174,17 @@ static void xttcpss_set_mode(enum clock_event_mode mode,
         case CLOCK_EVT_MODE_UNUSED:
         case CLOCK_EVT_MODE_SHUTDOWN:
                 ctrl_reg = __raw_readl(timer->base_addr +
-                                        XTTCPSS_CNT_CNTRL_OFFSET);
-                ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+                                        XTTCPS_CNT_CNTRL_OFFSET);
+                ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
                 __raw_writel(ctrl_reg,
-                                timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+                                timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
                 break;
         case CLOCK_EVT_MODE_RESUME:
                 ctrl_reg = __raw_readl(timer->base_addr +
-                                        XTTCPSS_CNT_CNTRL_OFFSET);
-                ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+                                        XTTCPS_CNT_CNTRL_OFFSET);
+                ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
                 __raw_writel(ctrl_reg,
-                                timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+                                timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
                 break;
         }
 }
@@ -201,7 +192,7 @@ static void xttcpss_set_mode(enum clock_event_mode mode,
 static void __init zynq_ttc_setup_clocksource(struct device_node *np,
                                              void __iomem *base)
 {
-        struct xttcpss_timer_clocksource *ttccs;
+        struct xttcps_timer_clocksource *ttccs;
         struct clk *clk;
         int err;
         u32 reg;
@@ -230,11 +221,11 @@ static void __init zynq_ttc_setup_clocksource(struct device_node *np,
         ttccs->cs.mask = CLOCKSOURCE_MASK(16);
         ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-        __raw_writel(0x0,  ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET);
+        __raw_writel(0x0,  ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
         __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-                     ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
+                     ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
         __raw_writel(CNT_CNTRL_RESET,
-                     ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+                     ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 
         err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
         if (WARN_ON(err))
@@ -244,7 +235,7 @@ static void __init zynq_ttc_setup_clocksource(struct device_node *np,
 static void __init zynq_ttc_setup_clockevent(struct device_node *np,
                                             void __iomem *base)
 {
-        struct xttcpss_timer_clockevent *ttcce;
+        struct xttcps_timer_clockevent *ttcce;
         int err, irq;
         u32 reg;
 
@@ -272,17 +263,18 @@ static void __init zynq_ttc_setup_clockevent(struct device_node *np,
 
         ttcce->ce.name = np->name;
         ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-        ttcce->ce.set_next_event = xttcpss_set_next_event;
-        ttcce->ce.set_mode = xttcpss_set_mode;
+        ttcce->ce.set_next_event = xttcps_set_next_event;
+        ttcce->ce.set_mode = xttcps_set_mode;
         ttcce->ce.rating = 200;
         ttcce->ce.irq = irq;
+        ttcce->ce.cpumask = cpu_possible_mask;
 
-        __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+        __raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
         __raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-                     ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
-        __raw_writel(0x1,  ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET);
+                     ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
+        __raw_writel(0x1,  ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
 
-        err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER,
+        err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
                           np->name, ttcce);
         if (WARN_ON(err))
                 return;
@@ -301,12 +293,12 @@ static const __initconst struct of_device_id zynq_ttc_match[] = {
 };
 
 /**
- * xttcpss_timer_init - Initialize the timer
+ * xttcps_timer_init - Initialize the timer
  *
  * Initializes the timer hardware and register the clock source and clock event
  * timers with Linux kernal timer framework
  **/
-void __init xttcpss_timer_init(void)
+void __init xttcps_timer_init(void)
 {
         struct device_node *np;
 
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index cbfbbe461788..837a2d52e9db 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -156,14 +156,9 @@ void __init iop_init_time(unsigned long tick_rate)
         write_tmr0(timer_ctl & ~IOP_TMR_EN);
         write_tisr(1);
         setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
-        clockevents_calc_mult_shift(&iop_clockevent,
-                                    tick_rate, IOP_MIN_RANGE);
-        iop_clockevent.max_delta_ns =
-                clockevent_delta2ns(0xfffffffe, &iop_clockevent);
-        iop_clockevent.min_delta_ns =
-                clockevent_delta2ns(0xf, &iop_clockevent);
         iop_clockevent.cpumask = cpumask_of(0);
-        clockevents_register_device(&iop_clockevent);
+        clockevents_config_and_register(&iop_clockevent, tick_rate,
+                                        0xf, 0xfffffffe);
 
         /*
          * Set up free-running clocksource timer 1.
diff --git a/arch/arm/plat-orion/time.c b/arch/arm/plat-orion/time.c
index 0f4fa863dd55..5d5ac0f05422 100644
--- a/arch/arm/plat-orion/time.c
+++ b/arch/arm/plat-orion/time.c
@@ -156,7 +156,6 @@ orion_clkevt_mode(enum clock_event_mode mode, struct clock_event_device *dev)
 static struct clock_event_device orion_clkevt = {
         .name           = "orion_tick",
         .features       = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
-        .shift          = 32,
         .rating         = 300,
         .set_next_event = orion_clkevt_next_event,
         .set_mode       = orion_clkevt_mode,
@@ -221,9 +220,6 @@ orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
          * Setup clockevent timer (interrupt-driven).
          */
         setup_irq(irq, &orion_timer_irq);
-        orion_clkevt.mult = div_sc(tclk, NSEC_PER_SEC, orion_clkevt.shift);
-        orion_clkevt.max_delta_ns = clockevent_delta2ns(0xfffffffe, &orion_clkevt);
-        orion_clkevt.min_delta_ns = clockevent_delta2ns(1, &orion_clkevt);
         orion_clkevt.cpumask = cpumask_of(0);
-        clockevents_register_device(&orion_clkevt);
+        clockevents_config_and_register(&orion_clkevt, tclk, 1, 0xfffffffe);
 }
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
deleted file mode 100644
index eef3b6a2f8a8..000000000000
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ /dev/null
@@ -1,116 +0,0 @@
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-config PLAT_S3C24XX
-        bool
-        depends on ARCH_S3C24XX
-        default y
-        select ARCH_REQUIRE_GPIOLIB
-        select NO_IOPORT
-        select S3C_DEV_NAND
-        help
-          Base platform code for any Samsung S3C24XX device
-
-if PLAT_S3C24XX
-
-# low-level serial option nodes
-
-config CPU_LLSERIAL_S3C2410_ONLY
-        bool
-        default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440
-
-config CPU_LLSERIAL_S3C2440_ONLY
-        bool
-        default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410
-
-config CPU_LLSERIAL_S3C2410
-        bool
-        help
-          Selected if there is an S3C2410 (or register compatible) serial
-          low-level implementation needed
-
-config CPU_LLSERIAL_S3C2440
-        bool
-        help
-          Selected if there is an S3C2440 (or register compatible) serial
-          low-level implementation needed
-
-# code that is shared between a number of the s3c24xx implementations
-
-config S3C2410_CLOCK
-        bool
-        help
-          Clock code for the S3C2410, and similar processors which
-          is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-        bool
-        help
-          Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
-# gpio configurations
-
-config S3C24XX_GPIO_EXTRA
-        int
-        default 128 if S3C24XX_GPIO_EXTRA128
-        default 64 if S3C24XX_GPIO_EXTRA64
-        default 16 if ARCH_H1940
-        default 0
-
-config S3C24XX_GPIO_EXTRA64
-        bool
-        help
-          Add an extra 64 gpio numbers to the available GPIO pool. This is
-          available for boards that need extra gpios for external devices.
-
-config S3C24XX_GPIO_EXTRA128
-        bool
-        help
-          Add an extra 128 gpio numbers to the available GPIO pool. This is
-          available for boards that need extra gpios for external devices.
-
-config S3C24XX_DMA
-        bool "S3C2410 DMA support"
-        depends on ARCH_S3C24XX
-        select S3C_DMA
-        help
-          S3C2410 DMA support. This is needed for drivers like sound which
-          use the S3C2410's DMA system to move data to and from the
-          peripheral blocks.
-
-config S3C2410_DMA_DEBUG
-        bool "S3C2410 DMA support debug"
-        depends on ARCH_S3C24XX && S3C2410_DMA
-        help
-          Enable debugging output for the DMA code. This option sends info
-          to the kernel log, at priority KERN_DEBUG.
-
-# common code for s3c24xx based machines, such as the SMDKs.
-
-# cpu frequency items common between s3c2410 and s3c2440/s3c2442
-
-config S3C2410_IOTIMING
-        bool
-        depends on CPU_FREQ_S3C24XX
-        help
-          Internal node to select io timing code that is common to the s3c2410
-          and s3c2440/s3c2442 cpu frequency support.
-
-config S3C2410_CPUFREQ_UTILS
-        bool
-        depends on CPU_FREQ_S3C24XX
-        help
-          Internal node to select timing code that is common to the s3c2410
-          and s3c2440/s3c244 cpu frequency support.
-
-# cpu frequency support common to s3c2412, s3c2413 and s3c2442
-
-config S3C2412_IOTIMING
-        bool
-        depends on CPU_FREQ_S3C24XX && (CPU_S3C2412 || CPU_S3C2443)
-        help
-          Intel node to select io timing code that is common to the s3c2412
-          and the s3c2443.
-
-endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
deleted file mode 100644
index 9f60549c8da1..000000000000
--- a/arch/arm/plat-s3c24xx/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-# arch/arm/plat-s3c24xx/Makefile
-#
-# Copyright 2007 Simtec Electronics
-#
-# Licensed under GPLv2
-
-obj-y                           :=
-obj-m                           :=
-obj-n                           :=
-obj-                            :=
-
-
-# Core files
-
-obj-y                           += irq.o
-obj-$(CONFIG_S3C24XX_DCLK)      += clock-dclk.o
-
-obj-$(CONFIG_CPU_FREQ_S3C24XX)  += cpu-freq.o
-obj-$(CONFIG_CPU_FREQ_S3C24XX_DEBUGFS) += cpu-freq-debugfs.o
-
-# Architecture dependent builds
-
-obj-$(CONFIG_S3C2410_CLOCK)     += s3c2410-clock.o
-obj-$(CONFIG_S3C24XX_DMA)       += dma.o
-obj-$(CONFIG_S3C2410_IOTIMING)  += s3c2410-iotiming.o
-obj-$(CONFIG_S3C2412_IOTIMING)  += s3c2412-iotiming.o
-obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
deleted file mode 100644
index fe57bbbf166b..000000000000
--- a/arch/arm/plat-s3c24xx/irq.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/irq.c
- *
- * Copyright (c) 2003-2004 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/device.h>
-#include <linux/syscore_ops.h>
-
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include <plat/regs-irqtype.h>
-
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/irq.h>
-
-static void
-s3c_irq_mask(struct irq_data *data)
-{
-        unsigned int irqno = data->irq - IRQ_EINT0;
-        unsigned long mask;
-
-        mask = __raw_readl(S3C2410_INTMSK);
-        mask |= 1UL << irqno;
-        __raw_writel(mask, S3C2410_INTMSK);
-}
-
-static inline void
-s3c_irq_ack(struct irq_data *data)
-{
-        unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-
-        __raw_writel(bitval, S3C2410_SRCPND);
-        __raw_writel(bitval, S3C2410_INTPND);
-}
-
-static inline void
-s3c_irq_maskack(struct irq_data *data)
-{
-        unsigned long bitval = 1UL << (data->irq - IRQ_EINT0);
-        unsigned long mask;
-
-        mask = __raw_readl(S3C2410_INTMSK);
-        __raw_writel(mask|bitval, S3C2410_INTMSK);
-
-        __raw_writel(bitval, S3C2410_SRCPND);
-        __raw_writel(bitval, S3C2410_INTPND);
-}
-
-
-static void
-s3c_irq_unmask(struct irq_data *data)
-{
-        unsigned int irqno = data->irq;
-        unsigned long mask;
-
-        if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
-                irqdbf2("s3c_irq_unmask %d\n", irqno);
-
-        irqno -= IRQ_EINT0;
-
-        mask = __raw_readl(S3C2410_INTMSK);
-        mask &= ~(1UL << irqno);
-        __raw_writel(mask, S3C2410_INTMSK);
-}
-
-struct irq_chip s3c_irq_level_chip = {
-        .name           = "s3c-level",
-        .irq_ack        = s3c_irq_maskack,
-        .irq_mask       = s3c_irq_mask,
-        .irq_unmask     = s3c_irq_unmask,
-        .irq_set_wake   = s3c_irq_wake
-};
-
-struct irq_chip s3c_irq_chip = {
-        .name           = "s3c",
-        .irq_ack        = s3c_irq_ack,
-        .irq_mask       = s3c_irq_mask,
-        .irq_unmask     = s3c_irq_unmask,
-        .irq_set_wake   = s3c_irq_wake
-};
-
-static void
-s3c_irqext_mask(struct irq_data *data)
-{
-        unsigned int irqno = data->irq - EXTINT_OFF;
-        unsigned long mask;
-
-        mask = __raw_readl(S3C24XX_EINTMASK);
-        mask |= ( 1UL << irqno);
-        __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-static void
-s3c_irqext_ack(struct irq_data *data)
-{
-        unsigned long req;
-        unsigned long bit;
-        unsigned long mask;
-
-        bit = 1UL << (data->irq - EXTINT_OFF);
-
-        mask = __raw_readl(S3C24XX_EINTMASK);
-
-        __raw_writel(bit, S3C24XX_EINTPEND);
-
-        req = __raw_readl(S3C24XX_EINTPEND);
-        req &= ~mask;
-
-        /* not sure if we should be acking the parent irq... */
-
-        if (data->irq <= IRQ_EINT7) {
-                if ((req & 0xf0) == 0)
-                        s3c_irq_ack(irq_get_irq_data(IRQ_EINT4t7));
-        } else {
-                if ((req >> 8) == 0)
-                        s3c_irq_ack(irq_get_irq_data(IRQ_EINT8t23));
-        }
-}
-
-static void
-s3c_irqext_unmask(struct irq_data *data)
-{
-        unsigned int irqno = data->irq - EXTINT_OFF;
-        unsigned long mask;
-
-        mask = __raw_readl(S3C24XX_EINTMASK);
-        mask &= ~(1UL << irqno);
-        __raw_writel(mask, S3C24XX_EINTMASK);
-}
-
-int
-s3c_irqext_type(struct irq_data *data, unsigned int type)
-{
-        void __iomem *extint_reg;
-        void __iomem *gpcon_reg;
-        unsigned long gpcon_offset, extint_offset;
-        unsigned long newvalue = 0, value;
-
-        if ((data->irq >= IRQ_EINT0) && (data->irq <= IRQ_EINT3)) {
-                gpcon_reg = S3C2410_GPFCON;
-                extint_reg = S3C24XX_EXTINT0;
-                gpcon_offset = (data->irq - IRQ_EINT0) * 2;
-                extint_offset = (data->irq - IRQ_EINT0) * 4;
-        } else if ((data->irq >= IRQ_EINT4) && (data->irq <= IRQ_EINT7)) {
-                gpcon_reg = S3C2410_GPFCON;
-                extint_reg = S3C24XX_EXTINT0;
-                gpcon_offset = (data->irq - (EXTINT_OFF)) * 2;
-                extint_offset = (data->irq - (EXTINT_OFF)) * 4;
-        } else if ((data->irq >= IRQ_EINT8) && (data->irq <= IRQ_EINT15)) {
-                gpcon_reg = S3C2410_GPGCON;
-                extint_reg = S3C24XX_EXTINT1;
-                gpcon_offset = (data->irq - IRQ_EINT8) * 2;
-                extint_offset = (data->irq - IRQ_EINT8) * 4;
-        } else if ((data->irq >= IRQ_EINT16) && (data->irq <= IRQ_EINT23)) {
-                gpcon_reg = S3C2410_GPGCON;
-                extint_reg = S3C24XX_EXTINT2;
-                gpcon_offset = (data->irq - IRQ_EINT8) * 2;
-                extint_offset = (data->irq - IRQ_EINT16) * 4;
-        } else {
-                return -1;
-        }
-
-        /* Set the GPIO to external interrupt mode */
-        value = __raw_readl(gpcon_reg);
-        value = (value & ~(3 << gpcon_offset)) | (0x02 << gpcon_offset);
-        __raw_writel(value, gpcon_reg);
-
-        /* Set the external interrupt to pointed trigger type */
-        switch (type)
-        {
-                case IRQ_TYPE_NONE:
-                        printk(KERN_WARNING "No edge setting!\n");
-                        break;
-
-                case IRQ_TYPE_EDGE_RISING:
-                        newvalue = S3C2410_EXTINT_RISEEDGE;
-                        break;
-
-                case IRQ_TYPE_EDGE_FALLING:
-                        newvalue = S3C2410_EXTINT_FALLEDGE;
-                        break;
-
-                case IRQ_TYPE_EDGE_BOTH:
-                        newvalue = S3C2410_EXTINT_BOTHEDGE;
-                        break;
-
-                case IRQ_TYPE_LEVEL_LOW:
-                        newvalue = S3C2410_EXTINT_LOWLEV;
-                        break;
-
-                case IRQ_TYPE_LEVEL_HIGH:
-                        newvalue = S3C2410_EXTINT_HILEV;
-                        break;
-
-                default:
-                        printk(KERN_ERR "No such irq type %d", type);
-                        return -1;
-        }
-
-        value = __raw_readl(extint_reg);
-        value = (value & ~(7 << extint_offset)) | (newvalue << extint_offset);
-        __raw_writel(value, extint_reg);
-
-        return 0;
-}
-
-static struct irq_chip s3c_irqext_chip = {
-        .name           = "s3c-ext",
-        .irq_mask       = s3c_irqext_mask,
-        .irq_unmask     = s3c_irqext_unmask,
-        .irq_ack        = s3c_irqext_ack,
-        .irq_set_type   = s3c_irqext_type,
-        .irq_set_wake   = s3c_irqext_wake
-};
-
-static struct irq_chip s3c_irq_eint0t4 = {
-        .name           = "s3c-ext0",
-        .irq_ack        = s3c_irq_ack,
-        .irq_mask       = s3c_irq_mask,
-        .irq_unmask     = s3c_irq_unmask,
-        .irq_set_wake   = s3c_irq_wake,
-        .irq_set_type   = s3c_irqext_type,
-};
-
-/* mask values for the parent registers for each of the interrupt types */
-
-#define INTMSK_UART0     (1UL << (IRQ_UART0 - IRQ_EINT0))
-#define INTMSK_UART1     (1UL << (IRQ_UART1 - IRQ_EINT0))
-#define INTMSK_UART2     (1UL << (IRQ_UART2 - IRQ_EINT0))
-#define INTMSK_ADCPARENT (1UL << (IRQ_ADCPARENT - IRQ_EINT0))
-
-
-/* UART0 */
-
-static void
-s3c_irq_uart0_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_UART0, 7);
-}
-
-static void
-s3c_irq_uart0_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_UART0);
-}
-
-static void
-s3c_irq_uart0_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_UART0, 7);
-}
-
-static struct irq_chip s3c_irq_uart0 = {
-        .name           = "s3c-uart0",
-        .irq_mask       = s3c_irq_uart0_mask,
-        .irq_unmask     = s3c_irq_uart0_unmask,
-        .irq_ack        = s3c_irq_uart0_ack,
-};
-
-/* UART1 */
-
-static void
-s3c_irq_uart1_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static void
-s3c_irq_uart1_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_UART1);
-}
-
-static void
-s3c_irq_uart1_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_UART1, 7 << 3);
-}
-
-static struct irq_chip s3c_irq_uart1 = {
-        .name           = "s3c-uart1",
-        .irq_mask       = s3c_irq_uart1_mask,
-        .irq_unmask     = s3c_irq_uart1_unmask,
-        .irq_ack        = s3c_irq_uart1_ack,
-};
-
-/* UART2 */
-
-static void
-s3c_irq_uart2_mask(struct irq_data *data)
-{
-        s3c_irqsub_mask(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static void
-s3c_irq_uart2_unmask(struct irq_data *data)
-{
-        s3c_irqsub_unmask(data->irq, INTMSK_UART2);
-}
-
-static void
-s3c_irq_uart2_ack(struct irq_data *data)
-{
-        s3c_irqsub_maskack(data->irq, INTMSK_UART2, 7 << 6);
-}
-
-static struct irq_chip s3c_irq_uart2 = {
-        .name           = "s3c-uart2",
-        .irq_mask       = s3c_irq_uart2_mask,
-        .irq_unmask     = s3c_irq_uart2_unmask,
-        .irq_ack        = s3c_irq_uart2_ack,
-};
-
-/* ADC and Touchscreen */
-
-static void
-s3c_irq_adc_mask(struct irq_data *d)
-{
-        s3c_irqsub_mask(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static void
-s3c_irq_adc_unmask(struct irq_data *d)
-{
-        s3c_irqsub_unmask(d->irq, INTMSK_ADCPARENT);
-}
-
-static void
-s3c_irq_adc_ack(struct irq_data *d)
-{
-        s3c_irqsub_ack(d->irq, INTMSK_ADCPARENT, 3 << 9);
-}
-
-static struct irq_chip s3c_irq_adc = {
-        .name           = "s3c-adc",
-        .irq_mask       = s3c_irq_adc_mask,
-        .irq_unmask     = s3c_irq_adc_unmask,
-        .irq_ack        = s3c_irq_adc_ack,
-};
-
-/* irq demux for adc */
-static void s3c_irq_demux_adc(unsigned int irq,
-                              struct irq_desc *desc)
-{
-        unsigned int subsrc, submsk;
-        unsigned int offset = 9;
-
-        /* read the current pending interrupts, and the mask
-         * for what it is available */
-
-        subsrc = __raw_readl(S3C2410_SUBSRCPND);
-        submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-        subsrc &= ~submsk;
-        subsrc >>= offset;
-        subsrc &= 3;
-
-        if (subsrc != 0) {
-                if (subsrc & 1) {
-                        generic_handle_irq(IRQ_TC);
-                }
-                if (subsrc & 2) {
-                        generic_handle_irq(IRQ_ADC);
-                }
-        }
-}
-
-static void s3c_irq_demux_uart(unsigned int start)
-{
-        unsigned int subsrc, submsk;
-        unsigned int offset = start - IRQ_S3CUART_RX0;
-
-        /* read the current pending interrupts, and the mask
-         * for what it is available */
-
-        subsrc = __raw_readl(S3C2410_SUBSRCPND);
-        submsk = __raw_readl(S3C2410_INTSUBMSK);
-
-        irqdbf2("s3c_irq_demux_uart: start=%d (%d), subsrc=0x%08x,0x%08x\n",
-                start, offset, subsrc, submsk);
-
-        subsrc &= ~submsk;
-        subsrc >>= offset;
-        subsrc &= 7;
-
-        if (subsrc != 0) {
-                if (subsrc & 1)
-                        generic_handle_irq(start);
-
-                if (subsrc & 2)
-                        generic_handle_irq(start+1);
-
-                if (subsrc & 4)
-                        generic_handle_irq(start+2);
-        }
-}
-
-/* uart demux entry points */
-
-static void
-s3c_irq_demux_uart0(unsigned int irq,
-                    struct irq_desc *desc)
-{
-        irq = irq;
-        s3c_irq_demux_uart(IRQ_S3CUART_RX0);
-}
-
-static void
-s3c_irq_demux_uart1(unsigned int irq,
-                    struct irq_desc *desc)
-{
-        irq = irq;
-        s3c_irq_demux_uart(IRQ_S3CUART_RX1);
-}
-
-static void
-s3c_irq_demux_uart2(unsigned int irq,
-                    struct irq_desc *desc)
-{
-        irq = irq;
-        s3c_irq_demux_uart(IRQ_S3CUART_RX2);
-}
-
-static void
-s3c_irq_demux_extint8(unsigned int irq,
-                      struct irq_desc *desc)
-{
-        unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-        unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-        eintpnd &= ~eintmsk;
-        eintpnd &= ~0xff;       /* ignore lower irqs */
-
-        /* we may as well handle all the pending IRQs here */
-
-        while (eintpnd) {
-                irq = __ffs(eintpnd);
-                eintpnd &= ~(1<<irq);
-
-                irq += (IRQ_EINT4 - 4);
-                generic_handle_irq(irq);
-        }
-
-}
-
-static void
-s3c_irq_demux_extint4t7(unsigned int irq,
-                        struct irq_desc *desc)
-{
-        unsigned long eintpnd = __raw_readl(S3C24XX_EINTPEND);
-        unsigned long eintmsk = __raw_readl(S3C24XX_EINTMASK);
-
-        eintpnd &= ~eintmsk;
-        eintpnd &= 0xff;        /* only lower irqs */
-
-        /* we may as well handle all the pending IRQs here */
-
-        while (eintpnd) {
-                irq = __ffs(eintpnd);
-                eintpnd &= ~(1<<irq);
-
-                irq += (IRQ_EINT4 - 4);
-
-                generic_handle_irq(irq);
-        }
-}
-
-#ifdef CONFIG_FIQ
-/**
- * s3c24xx_set_fiq - set the FIQ routing
- * @irq: IRQ number to route to FIQ on processor.
- * @on: Whether to route @irq to the FIQ, or to remove the FIQ routing.
- *
- * Change the state of the IRQ to FIQ routing depending on @irq and @on. If
- * @on is true, the @irq is checked to see if it can be routed and the
- * interrupt controller updated to route the IRQ. If @on is false, the FIQ
- * routing is cleared, regardless of which @irq is specified.
- */
-int s3c24xx_set_fiq(unsigned int irq, bool on)
-{
-        u32 intmod;
-        unsigned offs;
-
-        if (on) {
-                offs = irq - FIQ_START;
-                if (offs > 31)
-                        return -EINVAL;
-
-                intmod = 1 << offs;
-        } else {
-                intmod = 0;
-        }
-
-        __raw_writel(intmod, S3C2410_INTMOD);
-        return 0;
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
-#endif
-
-
-/* s3c24xx_init_irq
- *
- * Initialise S3C2410 IRQ system
-*/
-
-void __init s3c24xx_init_irq(void)
-{
-        unsigned long pend;
-        unsigned long last;
-        int irqno;
-        int i;
-
-#ifdef CONFIG_FIQ
-        init_FIQ(FIQ_START);
-#endif
-
-        irqdbf("s3c2410_init_irq: clearing interrupt status flags\n");
-
-        /* first, clear all interrupts pending... */
-
-        last = 0;
-        for (i = 0; i < 4; i++) {
-                pend = __raw_readl(S3C24XX_EINTPEND);
-
-                if (pend == 0 || pend == last)
-                        break;
-
-                __raw_writel(pend, S3C24XX_EINTPEND);
-                printk("irq: clearing pending ext status %08x\n", (int)pend);
-                last = pend;
-        }
-
-        last = 0;
-        for (i = 0; i < 4; i++) {
-                pend = __raw_readl(S3C2410_INTPND);
-
-                if (pend == 0 || pend == last)
-                        break;
-
-                __raw_writel(pend, S3C2410_SRCPND);
-                __raw_writel(pend, S3C2410_INTPND);
-                printk("irq: clearing pending status %08x\n", (int)pend);
-                last = pend;
-        }
-
-        last = 0;
-        for (i = 0; i < 4; i++) {
-                pend = __raw_readl(S3C2410_SUBSRCPND);
-
-                if (pend == 0 || pend == last)
-                        break;
-
-                printk("irq: clearing subpending status %08x\n", (int)pend);
-                __raw_writel(pend, S3C2410_SUBSRCPND);
-                last = pend;
-        }
-
-        /* register the main interrupts */
-
-        irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
-
-        for (irqno = IRQ_EINT4t7; irqno <= IRQ_ADCPARENT; irqno++) {
-                /* set all the s3c2410 internal irqs */
-
-                switch (irqno) {
-                        /* deal with the special IRQs (cascaded) */
-
-                case IRQ_EINT4t7:
-                case IRQ_EINT8t23:
-                case IRQ_UART0:
-                case IRQ_UART1:
-                case IRQ_UART2:
-                case IRQ_ADCPARENT:
-                        irq_set_chip_and_handler(irqno, &s3c_irq_level_chip,
-                                                 handle_level_irq);
-                        break;
-
-                case IRQ_RESERVED6:
-                case IRQ_RESERVED24:
-                        /* no IRQ here */
-                        break;
-
-                default:
-                        //irqdbf("registering irq %d (s3c irq)\n", irqno);
-                        irq_set_chip_and_handler(irqno, &s3c_irq_chip,
-                                                 handle_edge_irq);
-                        set_irq_flags(irqno, IRQF_VALID);
-                }
-        }
-
-        /* setup the cascade irq handlers */
-
-        irq_set_chained_handler(IRQ_EINT4t7, s3c_irq_demux_extint4t7);
-        irq_set_chained_handler(IRQ_EINT8t23, s3c_irq_demux_extint8);
-
-        irq_set_chained_handler(IRQ_UART0, s3c_irq_demux_uart0);
-        irq_set_chained_handler(IRQ_UART1, s3c_irq_demux_uart1);
-        irq_set_chained_handler(IRQ_UART2, s3c_irq_demux_uart2);
-        irq_set_chained_handler(IRQ_ADCPARENT, s3c_irq_demux_adc);
-
-        /* external interrupts */
-
-        for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
-                irqdbf("registering irq %d (ext int)\n", irqno);
-                irq_set_chip_and_handler(irqno, &s3c_irq_eint0t4,
-                                         handle_edge_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
-                irqdbf("registering irq %d (extended s3c irq)\n", irqno);
-                irq_set_chip_and_handler(irqno, &s3c_irqext_chip,
-                                         handle_edge_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        /* register the uart interrupts */
-
-        irqdbf("s3c2410: registering external interrupts\n");
-
-        for (irqno = IRQ_S3CUART_RX0; irqno <= IRQ_S3CUART_ERR0; irqno++) {
-                irqdbf("registering irq %d (s3c uart0 irq)\n", irqno);
-                irq_set_chip_and_handler(irqno, &s3c_irq_uart0,
-                                         handle_level_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        for (irqno = IRQ_S3CUART_RX1; irqno <= IRQ_S3CUART_ERR1; irqno++) {
-                irqdbf("registering irq %d (s3c uart1 irq)\n", irqno);
-                irq_set_chip_and_handler(irqno, &s3c_irq_uart1,
-                                         handle_level_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        for (irqno = IRQ_S3CUART_RX2; irqno <= IRQ_S3CUART_ERR2; irqno++) {
-                irqdbf("registering irq %d (s3c uart2 irq)\n", irqno);
-                irq_set_chip_and_handler(irqno, &s3c_irq_uart2,
-                                         handle_level_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        for (irqno = IRQ_TC; irqno <= IRQ_ADC; irqno++) {
-                irqdbf("registering irq %d (s3c adc irq)\n", irqno);
-                irq_set_chip_and_handler(irqno, &s3c_irq_adc, handle_edge_irq);
-                set_irq_flags(irqno, IRQF_VALID);
-        }
-
-        irqdbf("s3c2410: registered interrupt handlers\n");
-}
-
-struct syscore_ops s3c24xx_irq_syscore_ops = {
-        .suspend        = s3c24xx_irq_suspend,
-        .resume         = s3c24xx_irq_resume,
-};
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index b69e11dc679d..37703ef6dfc7 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -194,8 +194,7 @@ extern void s3c24xx_init_uartdevs(char *name,
 
 /* timer for 2410/2440 */
 
-struct sys_timer;
-extern struct sys_timer s3c24xx_timer;
+extern void s3c24xx_timer_init(void);
 
 extern struct syscore_ops s3c2410_pm_syscore_ops;
 extern struct syscore_ops s3c2412_pm_syscore_ops;
diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h
index f7a3ea2c498a..cf5aae5b0975 100644
--- a/arch/arm/plat-samsung/include/plat/gpio-core.h
+++ b/arch/arm/plat-samsung/include/plat/gpio-core.h
@@ -106,7 +106,18 @@ static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chi
 #else
 /* machine specific code should provide samsung_gpiolib_getchip */
 
-#include <mach/gpio-track.h>
+extern struct samsung_gpio_chip s3c24xx_gpios[];
+
+static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin)
+{
+        struct samsung_gpio_chip *chip;
+
+        if (pin > S3C_GPIO_END)
+                return NULL;
+
+        chip = &s3c24xx_gpios[pin/32];
+        return ((pin - chip->chip.base) < chip->chip.ngpio) ? chip : NULL;
+}
 
 static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { }
 #endif
diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h
deleted file mode 100644
index d1ecef0e38e0..000000000000
--- a/arch/arm/plat-samsung/include/plat/gpio-fns.h
+++ /dev/null
@@ -1 +0,0 @@
-#include <plat/gpio-cfg.h>
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index 887a0c954379..f6fcadeee969 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -109,17 +109,11 @@ extern void s3c_pm_do_restore_core(struct sleep_save *ptr, int count);
 #ifdef CONFIG_PM
 extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
 extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
-extern int s3c24xx_irq_suspend(void);
-extern void s3c24xx_irq_resume(void);
 #else
 #define s3c_irq_wake NULL
 #define s3c_irqext_wake NULL
-#define s3c24xx_irq_suspend NULL
-#define s3c24xx_irq_resume  NULL
 #endif
 
-extern struct syscore_ops s3c24xx_irq_syscore_ops;
-
 /* PM debug functions */
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h
index 7178e338e25e..f27399a3c68d 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2416.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2416.h
@@ -25,6 +25,7 @@ extern  int s3c2416_baseclk_add(void);
 
 extern void s3c2416_restart(char mode, const char *cmd);
 
+extern void s3c2416_init_irq(void);
 extern struct syscore_ops s3c2416_irq_syscore_ops;
 
 #else
diff --git a/arch/arm/plat-samsung/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h
index a5b794ff838b..71b88ec48956 100644
--- a/arch/arm/plat-samsung/include/plat/s3c2443.h
+++ b/arch/arm/plat-samsung/include/plat/s3c2443.h
@@ -25,6 +25,8 @@ extern void s3c2443_init_clocks(int xtal);
 extern  int s3c2443_baseclk_add(void);
 
 extern void s3c2443_restart(char mode, const char *cmd);
+
+extern void s3c2443_init_irq(void);
 #else
 #define s3c2443_init_clocks NULL
 #define s3c2443_init_uarts NULL
diff --git a/arch/arm/plat-samsung/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h
index 3a70aebc9205..9c96f3586ce0 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-time.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-time.h
@@ -36,5 +36,5 @@ struct s5p_timer_source {
 
 extern void __init s5p_set_timer_source(enum s5p_timer_mode event,
                                         enum s5p_timer_mode source);
-extern  struct sys_timer s5p_timer;
+extern  void s5p_timer_init(void);
 #endif /* __ASM_PLAT_S5P_TIME_H */
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index 7e068d182c3d..438b24846e7f 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -97,33 +97,6 @@ static inline void flush(void)
                 *((volatile unsigned int __force *)(ad)) = (d); \
         } while (0)
 
-/* CONFIG_S3C_BOOT_WATCHDOG
- *
- * Simple boot-time watchdog setup, to reboot the system if there is
- * any problem with the boot process
-*/
-
-#ifdef CONFIG_S3C_BOOT_WATCHDOG
-
-#define WDOG_COUNT (0xff00)
-
-static inline void arch_decomp_wdog(void)
-{
-        __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-}
-
-static void arch_decomp_wdog_start(void)
-{
-        __raw_writel(WDOG_COUNT, S3C2410_WTDAT);
-        __raw_writel(WDOG_COUNT, S3C2410_WTCNT);
-        __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x80), S3C2410_WTCON);
-}
-
-#else
-#define arch_decomp_wdog_start()
-#define arch_decomp_wdog()
-#endif
-
 #ifdef CONFIG_S3C_BOOT_ERROR_RESET
 
 static void arch_decomp_error(const char *x)
@@ -173,7 +146,6 @@ arch_decomp_setup(void)
          */
 
         arch_detect_cpu();
-        arch_decomp_wdog_start();
 
         /* Enable the UART FIFOs if they where not enabled and our
          * configuration says we should turn them on.
diff --git a/arch/arm/plat-samsung/s5p-irq-eint.c b/arch/arm/plat-samsung/s5p-irq-eint.c
index 33bd3f3d20f5..faa651602780 100644
--- a/arch/arm/plat-samsung/s5p-irq-eint.c
+++ b/arch/arm/plat-samsung/s5p-irq-eint.c
@@ -15,8 +15,7 @@
 #include <linux/io.h>
 #include <linux/device.h>
 #include <linux/gpio.h>
-
-#include <asm/hardware/vic.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <plat/regs-irqtype.h>
 
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index dfb47d638f03..103e371f5e35 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -13,8 +13,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-
-#include <asm/hardware/vic.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <mach/map.h>
 #include <plat/regs-timer.h>
diff --git a/arch/arm/plat-samsung/s5p-time.c b/arch/arm/plat-samsung/s5p-time.c
index 028b6e877eb9..e92510cf82ee 100644
--- a/arch/arm/plat-samsung/s5p-time.c
+++ b/arch/arm/plat-samsung/s5p-time.c
@@ -274,15 +274,8 @@ static void __init s5p_clockevent_init(void)
         clock_rate = clk_get_rate(tin_event);
         clock_count_per_tick = clock_rate / HZ;
 
-        clockevents_calc_mult_shift(&time_event_device,
-                                    clock_rate, S5PTIMER_MIN_RANGE);
-        time_event_device.max_delta_ns =
-                clockevent_delta2ns(-1, &time_event_device);
-        time_event_device.min_delta_ns =
-                clockevent_delta2ns(1, &time_event_device);
-
         time_event_device.cpumask = cpumask_of(0);
-        clockevents_register_device(&time_event_device);
+        clockevents_config_and_register(&time_event_device, clock_rate, 1, -1);
 
         irq_number = timer_source.event_id + IRQ_TIMER0;
         setup_irq(irq_number, &s5p_clock_event_irq);
@@ -393,13 +386,9 @@ static void __init s5p_timer_resources(void)
         clk_enable(tin_source);
 }
 
-static void __init s5p_timer_init(void)
+void __init s5p_timer_init(void)
 {
         s5p_timer_resources();
         s5p_clockevent_init();
         s5p_clocksource_init();
 }
-
-struct sys_timer s5p_timer = {
-        .init           = s5p_timer_init,
-};
diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c
index 60552e22f22e..73defd00c3e4 100644
--- a/arch/arm/plat-samsung/time.c
+++ b/arch/arm/plat-samsung/time.c
@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
 
 #include <asm/mach-types.h>
 
@@ -95,7 +96,7 @@ static inline unsigned long timer_ticks_to_usec(unsigned long ticks)
  * IRQs are disabled before entering here from do_gettimeofday()
  */
 
-static unsigned long s3c2410_gettimeoffset (void)
+static u32 s3c2410_gettimeoffset(void)
 {
         unsigned long tdone;
         unsigned long tval;
@@ -120,7 +121,7 @@ static unsigned long s3c2410_gettimeoffset (void)
                         tdone += timer_startval;
         }
 
-        return timer_ticks_to_usec(tdone);
+        return timer_ticks_to_usec(tdone) * 1000;
 }
 
 
@@ -271,15 +272,16 @@ static void __init s3c2410_timer_resources(void)
         clk_enable(tin);
 }
 
-static void __init s3c2410_timer_init(void)
+static struct syscore_ops s3c24xx_syscore_ops = {
+        .resume         = s3c2410_timer_setup,
+};
+
+void __init s3c24xx_timer_init(void)
 {
+        arch_gettimeoffset = s3c2410_gettimeoffset;
+
         s3c2410_timer_resources();
         s3c2410_timer_setup();
         setup_irq(IRQ_TIMER4, &s3c2410_timer_irq);
+        register_syscore_ops(&s3c24xx_syscore_ops);
 }
-
-struct sys_timer s3c24xx_timer = {
-        .init           = s3c2410_timer_init,
-        .offset         = s3c2410_gettimeoffset,
-        .resume         = s3c2410_timer_setup
-};
diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h
index 2ce6cb17a98b..51b2dc93e4da 100644
--- a/arch/arm/plat-spear/include/plat/uncompress.h
+++ b/arch/arm/plat-spear/include/plat/uncompress.h
@@ -38,6 +38,5 @@ static inline void flush(void)
  * nothing to do
  */
 #define arch_decomp_setup()
-#define arch_decomp_wdog()
 
 #endif /* __PLAT_UNCOMPRESS_H */
diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c
index 03321af5de9f..bd5c53cd6962 100644
--- a/arch/arm/plat-spear/time.c
+++ b/arch/arm/plat-spear/time.c
@@ -186,15 +186,9 @@ static void __init spear_clockevent_init(int irq)
         tick_rate = clk_get_rate(gpt_clk);
         tick_rate >>= CTRL_PRESCALER16;
 
-        clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
-
-        clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
-                        &clkevt);
-        clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
-
         clkevt.cpumask = cpumask_of(0);
 
-        clockevents_register_device(&clkevt);
+        clockevents_config_and_register(&clkevt, tick_rate, 3, 0xfff0);
 
         setup_irq(irq, &spear_timer_irq);
 }
diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c
index 04ca4937d8ca..f2ac15561778 100644
--- a/arch/arm/plat-versatile/platsmp.c
+++ b/arch/arm/plat-versatile/platsmp.c
@@ -14,10 +14,10 @@
 #include <linux/device.h>
 #include <linux/jiffies.h>
 #include <linux/smp.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/cacheflush.h>
 #include <asm/smp_plat.h>
-#include <asm/hardware/gic.h>
 
 /*
  * Write pen_release in a way that is guaranteed to be visible to all
@@ -79,7 +79,7 @@ int __cpuinit versatile_boot_secondary(unsigned int cpu, struct task_struct *idl
          * the boot monitor to read the system wide flags register,
          * and branch to the address found there.
          */
-        gic_raise_softirq(cpumask_of(cpu), 0);
+        arch_send_wakeup_ipi_mask(cpumask_of(cpu));
 
         timeout = jiffies + (1 * HZ);
         while (time_before(jiffies, timeout)) {
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 2310b249675f..3126b920a4a5 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -85,7 +85,7 @@ time_sched_init(irqreturn_t(*timer_routine) (int, void *))
 /*
  * Should return useconds since last timer tick
  */
-u32 arch_gettimeoffset(void)
+static u32 blackfin_gettimeoffset(void)
 {
         unsigned long offset;
         unsigned long clocks_per_jiffy;
@@ -141,6 +141,10 @@ void read_persistent_clock(struct timespec *ts)
 
 void __init time_init(void)
 {
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+        arch_gettimeoffset = blackfin_gettimeoffset;
+#endif
+
 #ifdef CONFIG_RTC_DRV_BFIN
         /* [#2663] hack to filter junk RTC values that would cause
          * userspace to have to deal with time values greater than
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index bcffcb6a9415..fce7c541d70d 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -55,9 +55,9 @@ unsigned long get_ns_in_jiffie(void)
         return ns;
 }
 
-unsigned long do_slow_gettimeoffset(void)
+static u32 cris_v10_gettimeoffset(void)
 {
-        unsigned long count;
+        u32 count;
 
         /* The timer interrupt comes from Etrax timer 0. In order to get
          * better precision, we check the current value. It might have
@@ -65,8 +65,8 @@ unsigned long do_slow_gettimeoffset(void)
          */
         count = *R_TIMER0_DATA;
 
-        /* Convert timer value to usec */
-        return (TIMER0_DIV - count) * ((NSEC_PER_SEC/1000)/HZ)/TIMER0_DIV;
+        /* Convert timer value to nsec */
+        return (TIMER0_DIV - count) * (NSEC_PER_SEC/HZ)/TIMER0_DIV;
 }
 
 /* Excerpt from the Etrax100 HSDD about the built-in watchdog:
@@ -191,6 +191,8 @@ static struct irqaction irq2  = {
 void __init
 time_init(void)
 {       
+        arch_gettimeoffset = cris_v10_gettimeoffset;
+
         /* probe for the RTC and read it if it exists 
          * Before the RTC can be probed the loops_per_usec variable needs 
          * to be initialized to make usleep work. A better value for 
diff --git a/arch/cris/kernel/time.c b/arch/cris/kernel/time.c
index 277ffc459e4b..fe6acdabbc8d 100644
--- a/arch/cris/kernel/time.c
+++ b/arch/cris/kernel/time.c
@@ -39,17 +39,6 @@
 extern unsigned long loops_per_jiffy; /* init/main.c */
 unsigned long loops_per_usec;
 
-
-#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern unsigned long do_slow_gettimeoffset(void);
-static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
-
-u32 arch_gettimeoffset(void)
-{
-       return do_gettimeoffset() * 1000;
-}
-#endif
-
 int set_rtc_mmss(unsigned long nowtime)
 {
         D(printk(KERN_DEBUG "set_rtc_mmss(%lu)\n", nowtime));
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index 84dd04048db9..1a15f81ea1bd 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -57,7 +57,7 @@ extern void smp_local_timer_interrupt(void);
 
 static unsigned long latch;
 
-u32 arch_gettimeoffset(void)
+static u32 m32r_gettimeoffset(void)
 {
         unsigned long  elapsed_time = 0;  /* [us] */
 
@@ -165,6 +165,8 @@ void read_persistent_clock(struct timespec *ts)
 
 void __init time_init(void)
 {
+        arch_gettimeoffset = m32r_gettimeoffset;
+
 #if defined(CONFIG_CHIP_M32102) || defined(CONFIG_CHIP_XNUX2) \
         || defined(CONFIG_CHIP_VDEC2) || defined(CONFIG_CHIP_M32700) \
         || defined(CONFIG_CHIP_OPSP) || defined(CONFIG_CHIP_M32104)
diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c
index ee01b7a38e58..b819390e29cd 100644
--- a/arch/m68k/amiga/config.c
+++ b/arch/m68k/amiga/config.c
@@ -95,7 +95,7 @@ static void amiga_sched_init(irq_handler_t handler);
 static void amiga_get_model(char *model);
 static void amiga_get_hardware_list(struct seq_file *m);
 /* amiga specific timer functions */
-static unsigned long amiga_gettimeoffset(void);
+static u32 amiga_gettimeoffset(void);
 extern void amiga_mksound(unsigned int count, unsigned int ticks);
 static void amiga_reset(void);
 extern void amiga_init_sound(void);
@@ -377,7 +377,7 @@ void __init config_amiga(void)
         mach_init_IRQ        = amiga_init_IRQ;
         mach_get_model       = amiga_get_model;
         mach_get_hardware_list = amiga_get_hardware_list;
-        mach_gettimeoffset   = amiga_gettimeoffset;
+        arch_gettimeoffset   = amiga_gettimeoffset;
 
         /*
          * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI
@@ -482,10 +482,10 @@ static void __init amiga_sched_init(irq_handler_t timer_routine)
 #define TICK_SIZE 10000
 
 /* This is always executed with interrupts disabled.  */
-static unsigned long amiga_gettimeoffset(void)
+static u32 amiga_gettimeoffset(void)
 {
         unsigned short hi, lo, hi2;
-        unsigned long ticks, offset = 0;
+        u32 ticks, offset = 0;
 
         /* read CIA B timer A current value */
         hi  = ciab.tahi;
@@ -507,7 +507,7 @@ static unsigned long amiga_gettimeoffset(void)
         ticks = jiffy_ticks - ticks;
         ticks = (10000 * ticks) / jiffy_ticks;
 
-        return ticks + offset;
+        return (ticks + offset) * 1000;
 }
 
 static void amiga_reset(void)  __noreturn;
diff --git a/arch/m68k/apollo/config.c b/arch/m68k/apollo/config.c
index f5565d6eeb8e..3ea56b90e718 100644
--- a/arch/m68k/apollo/config.c
+++ b/arch/m68k/apollo/config.c
@@ -26,7 +26,7 @@ u_long apollo_model;
 
 extern void dn_sched_init(irq_handler_t handler);
 extern void dn_init_IRQ(void);
-extern unsigned long dn_gettimeoffset(void);
+extern u32 dn_gettimeoffset(void);
 extern int dn_dummy_hwclk(int, struct rtc_time *);
 extern int dn_dummy_set_clock_mmss(unsigned long);
 extern void dn_dummy_reset(void);
@@ -151,7 +151,7 @@ void __init config_apollo(void)
 
         mach_sched_init=dn_sched_init; /* */
         mach_init_IRQ=dn_init_IRQ;
-        mach_gettimeoffset   = dn_gettimeoffset;
+        arch_gettimeoffset   = dn_gettimeoffset;
         mach_max_dma_address = 0xffffffff;
         mach_hwclk           = dn_dummy_hwclk; /* */
         mach_set_clock_mmss  = dn_dummy_set_clock_mmss; /* */
@@ -203,10 +203,9 @@ void dn_sched_init(irq_handler_t timer_routine)
                 pr_err("Couldn't register timer interrupt\n");
 }
 
-unsigned long dn_gettimeoffset(void) {
-
+u32 dn_gettimeoffset(void)
+{
         return 0xdeadbeef;
-
 }
 
 int dn_dummy_hwclk(int op, struct rtc_time *t) {
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index d8eb32747ac5..037c11c99331 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -74,7 +74,7 @@ static void atari_heartbeat(int on);
 
 /* atari specific timer functions (in time.c) */
 extern void atari_sched_init(irq_handler_t);
-extern unsigned long atari_gettimeoffset (void);
+extern u32 atari_gettimeoffset(void);
 extern int atari_mste_hwclk (int, struct rtc_time *);
 extern int atari_tt_hwclk (int, struct rtc_time *);
 extern int atari_mste_set_clock_mmss (unsigned long);
@@ -204,7 +204,7 @@ void __init config_atari(void)
         mach_init_IRQ        = atari_init_IRQ;
         mach_get_model   = atari_get_model;
         mach_get_hardware_list = atari_get_hardware_list;
-        mach_gettimeoffset   = atari_gettimeoffset;
+        arch_gettimeoffset   = atari_gettimeoffset;
         mach_reset           = atari_reset;
         mach_max_dma_address = 0xffffff;
 #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
diff --git a/arch/m68k/atari/time.c b/arch/m68k/atari/time.c
index c0cc68a2c829..da8f981c36d6 100644
--- a/arch/m68k/atari/time.c
+++ b/arch/m68k/atari/time.c
@@ -42,9 +42,9 @@ atari_sched_init(irq_handler_t timer_routine)
 #define TICK_SIZE 10000
 
 /* This is always executed with interrupts disabled.  */
-unsigned long atari_gettimeoffset (void)
+u32 atari_gettimeoffset(void)
 {
-  unsigned long ticks, offset = 0;
+  u32 ticks, offset = 0;
 
   /* read MFP timer C current value */
   ticks = st_mfp.tim_dt_c;
@@ -57,7 +57,7 @@ unsigned long atari_gettimeoffset (void)
   ticks = INT_TICKS - ticks;
   ticks = ticks * 10000L / INT_TICKS;
 
-  return ticks + offset;
+  return (ticks + offset) * 1000;
 }
 
 
diff --git a/arch/m68k/bvme6000/config.c b/arch/m68k/bvme6000/config.c
index 0bf850a20ea2..8943aa4c18e6 100644
--- a/arch/m68k/bvme6000/config.c
+++ b/arch/m68k/bvme6000/config.c
@@ -38,7 +38,7 @@
 
 static void bvme6000_get_model(char *model);
 extern void bvme6000_sched_init(irq_handler_t handler);
-extern unsigned long bvme6000_gettimeoffset (void);
+extern u32 bvme6000_gettimeoffset(void);
 extern int bvme6000_hwclk (int, struct rtc_time *);
 extern int bvme6000_set_clock_mmss (unsigned long);
 extern void bvme6000_reset (void);
@@ -110,7 +110,7 @@ void __init config_bvme6000(void)
     mach_max_dma_address = 0xffffffff;
     mach_sched_init      = bvme6000_sched_init;
     mach_init_IRQ        = bvme6000_init_IRQ;
-    mach_gettimeoffset   = bvme6000_gettimeoffset;
+    arch_gettimeoffset   = bvme6000_gettimeoffset;
     mach_hwclk           = bvme6000_hwclk;
     mach_set_clock_mmss  = bvme6000_set_clock_mmss;
     mach_reset           = bvme6000_reset;
@@ -216,13 +216,13 @@ void bvme6000_sched_init (irq_handler_t timer_routine)
  * results...
  */
 
-unsigned long bvme6000_gettimeoffset (void)
+u32 bvme6000_gettimeoffset(void)
 {
     volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
     volatile PitRegsPtr pit = (PitRegsPtr)BVME_PIT_BASE;
     unsigned char msr = rtc->msr & 0xc0;
     unsigned char t1int, t1op;
-    unsigned long v = 800000, ov;
+    u32 v = 800000, ov;
 
     rtc->msr = 0;       /* Ensure timer registers accessible */
 
@@ -246,7 +246,7 @@ unsigned long bvme6000_gettimeoffset (void)
         v += 10000;                     /* Int pending, + 10ms */
     rtc->msr = msr;
 
-    return v;
+    return v * 1000;
 }
 
 /*
diff --git a/arch/m68k/hp300/config.c b/arch/m68k/hp300/config.c
index bf16af1edacf..b7609f791522 100644
--- a/arch/m68k/hp300/config.c
+++ b/arch/m68k/hp300/config.c
@@ -251,7 +251,7 @@ void __init config_hp300(void)
         mach_sched_init      = hp300_sched_init;
         mach_init_IRQ        = hp300_init_IRQ;
         mach_get_model       = hp300_get_model;
-        mach_gettimeoffset   = hp300_gettimeoffset;
+        arch_gettimeoffset   = hp300_gettimeoffset;
         mach_hwclk           = hp300_hwclk;
         mach_get_ss          = hp300_get_ss;
         mach_reset           = hp300_reset;
diff --git a/arch/m68k/hp300/time.c b/arch/m68k/hp300/time.c
index 29a71be9fa5b..749543b425a4 100644
--- a/arch/m68k/hp300/time.c
+++ b/arch/m68k/hp300/time.c
@@ -46,7 +46,7 @@ static irqreturn_t hp300_tick(int irq, void *dev_id)
         return vector(irq, NULL);
 }
 
-unsigned long hp300_gettimeoffset(void)
+u32 hp300_gettimeoffset(void)
 {
   /* Read current timer 1 value */
   unsigned char lsb, msb1, msb2;
@@ -59,7 +59,7 @@ unsigned long hp300_gettimeoffset(void)
     /* A carry happened while we were reading.  Read it again */
     lsb = in_8(CLOCKBASE + 7);
   ticks = INTVAL - ((msb2 << 8) | lsb);
-  return (USECS_PER_JIFFY * ticks) / INTVAL;
+  return ((USECS_PER_JIFFY * ticks) / INTVAL) * 1000;
 }
 
 void __init hp300_sched_init(irq_handler_t vector)
diff --git a/arch/m68k/hp300/time.h b/arch/m68k/hp300/time.h
index 7b98242960de..f5583ec4033d 100644
--- a/arch/m68k/hp300/time.h
+++ b/arch/m68k/hp300/time.h
@@ -1,2 +1,2 @@
 extern void hp300_sched_init(irq_handler_t vector);
-extern unsigned long hp300_gettimeoffset(void);
+extern u32 hp300_gettimeoffset(void);
diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h
index 825c1c813196..953ca21da8ee 100644
--- a/arch/m68k/include/asm/machdep.h
+++ b/arch/m68k/include/asm/machdep.h
@@ -3,6 +3,7 @@
 
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
+#include <linux/time.h>
 
 struct pt_regs;
 struct mktime;
@@ -16,7 +17,6 @@ extern void (*mach_init_IRQ) (void);
 extern void (*mach_get_model) (char *model);
 extern void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
-extern unsigned long (*mach_gettimeoffset)(void);
 extern int (*mach_hwclk)(int, struct rtc_time*);
 extern unsigned int (*mach_get_ss)(void);
 extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
diff --git a/arch/m68k/kernel/setup_mm.c b/arch/m68k/kernel/setup_mm.c
index d872ce4807c9..80cfbe56ea32 100644
--- a/arch/m68k/kernel/setup_mm.c
+++ b/arch/m68k/kernel/setup_mm.c
@@ -84,7 +84,6 @@ void (*mach_init_IRQ) (void) __initdata = NULL;
 void (*mach_get_model) (char *model);
 void (*mach_get_hardware_list) (struct seq_file *m);
 /* machine dependent timer functions */
-unsigned long (*mach_gettimeoffset) (void);
 int (*mach_hwclk) (int, struct rtc_time*);
 EXPORT_SYMBOL(mach_hwclk);
 int (*mach_set_clock_mmss) (unsigned long);
diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c
index 5d0bcaad2e55..bea6bcf8f9b8 100644
--- a/arch/m68k/kernel/time.c
+++ b/arch/m68k/kernel/time.c
@@ -80,18 +80,8 @@ void read_persistent_clock(struct timespec *ts)
         }
 }
 
-void __init time_init(void)
-{
-        mach_sched_init(timer_interrupt);
-}
-
 #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 
-u32 arch_gettimeoffset(void)
-{
-        return mach_gettimeoffset() * 1000;
-}
-
 static int __init rtc_init(void)
 {
         struct platform_device *pdev;
@@ -106,3 +96,8 @@ static int __init rtc_init(void)
 module_init(rtc_init);
 
 #endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */
+
+void __init time_init(void)
+{
+        mach_sched_init(timer_interrupt);
+}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index d9f62e0f46c0..afb95d5fb26b 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -52,7 +52,7 @@ struct mac_booter_data mac_bi_data;
 static unsigned long mac_orig_videoaddr;
 
 /* Mac specific timer functions */
-extern unsigned long mac_gettimeoffset(void);
+extern u32 mac_gettimeoffset(void);
 extern int mac_hwclk(int, struct rtc_time *);
 extern int mac_set_clock_mmss(unsigned long);
 extern void iop_preinit(void);
@@ -177,7 +177,7 @@ void __init config_mac(void)
         mach_sched_init = mac_sched_init;
         mach_init_IRQ = mac_init_IRQ;
         mach_get_model = mac_get_model;
-        mach_gettimeoffset = mac_gettimeoffset;
+        arch_gettimeoffset = mac_gettimeoffset;
         mach_hwclk = mac_hwclk;
         mach_set_clock_mmss = mac_set_clock_mmss;
         mach_reset = mac_reset;
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 2d85662715fb..5d1458bb871b 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -327,7 +327,7 @@ void via_debug_dump(void)
  * TBI: get time offset between scheduling timer ticks
  */
 
-unsigned long mac_gettimeoffset (void)
+u32 mac_gettimeoffset(void)
 {
         unsigned long ticks, offset = 0;
 
@@ -341,7 +341,7 @@ unsigned long mac_gettimeoffset (void)
         ticks = MAC_CLOCK_TICK - ticks;
         ticks = ticks * 10000L / MAC_CLOCK_TICK;
 
-        return ticks + offset;
+        return (ticks + offset) * 1000;
 }
 
 /*
diff --git a/arch/m68k/mvme147/config.c b/arch/m68k/mvme147/config.c
index a41c09149e23..1c6262803b94 100644
--- a/arch/m68k/mvme147/config.c
+++ b/arch/m68k/mvme147/config.c
@@ -37,7 +37,7 @@
 
 static void mvme147_get_model(char *model);
 extern void mvme147_sched_init(irq_handler_t handler);
-extern unsigned long mvme147_gettimeoffset (void);
+extern u32 mvme147_gettimeoffset(void);
 extern int mvme147_hwclk (int, struct rtc_time *);
 extern int mvme147_set_clock_mmss (unsigned long);
 extern void mvme147_reset (void);
@@ -88,7 +88,7 @@ void __init config_mvme147(void)
         mach_max_dma_address    = 0x01000000;
         mach_sched_init         = mvme147_sched_init;
         mach_init_IRQ           = mvme147_init_IRQ;
-        mach_gettimeoffset      = mvme147_gettimeoffset;
+        arch_gettimeoffset      = mvme147_gettimeoffset;
         mach_hwclk              = mvme147_hwclk;
         mach_set_clock_mmss     = mvme147_set_clock_mmss;
         mach_reset              = mvme147_reset;
@@ -127,7 +127,7 @@ void mvme147_sched_init (irq_handler_t timer_routine)
 
 /* This is always executed with interrupts disabled.  */
 /* XXX There are race hazards in this code XXX */
-unsigned long mvme147_gettimeoffset (void)
+u32 mvme147_gettimeoffset(void)
 {
         volatile unsigned short *cp = (volatile unsigned short *)0xfffe1012;
         unsigned short n;
@@ -137,7 +137,7 @@ unsigned long mvme147_gettimeoffset (void)
                 n = *cp;
 
         n -= PCC_TIMER_PRELOAD;
-        return (unsigned long)n * 25 / 4;
+        return ((unsigned long)n * 25 / 4) * 1000;
 }
 
 static int bcd2int (unsigned char b)
diff --git a/arch/m68k/mvme16x/config.c b/arch/m68k/mvme16x/config.c
index b6d7d8a7a3dd..080a342458a1 100644
--- a/arch/m68k/mvme16x/config.c
+++ b/arch/m68k/mvme16x/config.c
@@ -43,7 +43,7 @@ static MK48T08ptr_t volatile rtc = (MK48T08ptr_t)MVME_RTC_BASE;
 
 static void mvme16x_get_model(char *model);
 extern void mvme16x_sched_init(irq_handler_t handler);
-extern unsigned long mvme16x_gettimeoffset (void);
+extern u32 mvme16x_gettimeoffset(void);
 extern int mvme16x_hwclk (int, struct rtc_time *);
 extern int mvme16x_set_clock_mmss (unsigned long);
 extern void mvme16x_reset (void);
@@ -289,7 +289,7 @@ void __init config_mvme16x(void)
     mach_max_dma_address = 0xffffffff;
     mach_sched_init      = mvme16x_sched_init;
     mach_init_IRQ        = mvme16x_init_IRQ;
-    mach_gettimeoffset   = mvme16x_gettimeoffset;
+    arch_gettimeoffset   = mvme16x_gettimeoffset;
     mach_hwclk           = mvme16x_hwclk;
     mach_set_clock_mmss  = mvme16x_set_clock_mmss;
     mach_reset           = mvme16x_reset;
@@ -405,9 +405,9 @@ void mvme16x_sched_init (irq_handler_t timer_routine)
 
 
 /* This is always executed with interrupts disabled.  */
-unsigned long mvme16x_gettimeoffset (void)
+u32 mvme16x_gettimeoffset(void)
 {
-    return (*(volatile unsigned long *)0xfff42008);
+    return (*(volatile u32 *)0xfff42008) * 1000;
 }
 
 int bcd2int (unsigned char b)
diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c
index 1adb5b7b0d1a..658542b914fc 100644
--- a/arch/m68k/q40/config.c
+++ b/arch/m68k/q40/config.c
@@ -40,7 +40,7 @@ extern void q40_init_IRQ(void);
 static void q40_get_model(char *model);
 extern void q40_sched_init(irq_handler_t handler);
 
-static unsigned long q40_gettimeoffset(void);
+static u32 q40_gettimeoffset(void);
 static int q40_hwclk(int, struct rtc_time *);
 static unsigned int q40_get_ss(void);
 static int q40_set_clock_mmss(unsigned long);
@@ -170,7 +170,7 @@ void __init config_q40(void)
         mach_sched_init = q40_sched_init;
 
         mach_init_IRQ = q40_init_IRQ;
-        mach_gettimeoffset = q40_gettimeoffset;
+        arch_gettimeoffset = q40_gettimeoffset;
         mach_hwclk = q40_hwclk;
         mach_get_ss = q40_get_ss;
         mach_get_rtc_pll = q40_get_rtc_pll;
@@ -204,9 +204,9 @@ int q40_parse_bootinfo(const struct bi_record *rec)
 }
 
 
-static unsigned long q40_gettimeoffset(void)
+static u32 q40_gettimeoffset(void)
 {
-        return 5000 * (ql_ticks != 0);
+        return 5000 * (ql_ticks != 0) * 1000;
 }
 
 
diff --git a/arch/m68k/sun3/config.c b/arch/m68k/sun3/config.c
index 2ca25bd01a96..f59ec58083f8 100644
--- a/arch/m68k/sun3/config.c
+++ b/arch/m68k/sun3/config.c
@@ -36,7 +36,7 @@
 
 char sun3_reserved_pmeg[SUN3_PMEGS_NUM];
 
-extern unsigned long sun3_gettimeoffset(void);
+extern u32 sun3_gettimeoffset(void);
 static void sun3_sched_init(irq_handler_t handler);
 extern void sun3_get_model (char* model);
 extern int sun3_hwclk(int set, struct rtc_time *t);
@@ -141,7 +141,7 @@ void __init config_sun3(void)
         mach_sched_init      =  sun3_sched_init;
         mach_init_IRQ        =  sun3_init_IRQ;
         mach_reset           =  sun3_reboot;
-        mach_gettimeoffset   =  sun3_gettimeoffset;
+        arch_gettimeoffset   =  sun3_gettimeoffset;
         mach_get_model       =  sun3_get_model;
         mach_hwclk           =  sun3_hwclk;
         mach_halt            =  sun3_halt;
diff --git a/arch/m68k/sun3/intersil.c b/arch/m68k/sun3/intersil.c
index 94fe8016f1f0..889829e11f1d 100644
--- a/arch/m68k/sun3/intersil.c
+++ b/arch/m68k/sun3/intersil.c
@@ -23,9 +23,9 @@
 #define START_VAL (INTERSIL_RUN | INTERSIL_INT_ENABLE | INTERSIL_24H_MODE)
 
 /* does this need to be implemented? */
-unsigned long sun3_gettimeoffset(void)
+u32 sun3_gettimeoffset(void)
 {
-  return 1;
+  return 1000;
 }
 
 
diff --git a/arch/m68k/sun3x/config.c b/arch/m68k/sun3x/config.c
index dd306c84d36d..0532d64d191e 100644
--- a/arch/m68k/sun3x/config.c
+++ b/arch/m68k/sun3x/config.c
@@ -48,7 +48,7 @@ void __init config_sun3x(void)
         mach_sched_init      = sun3x_sched_init;
         mach_init_IRQ        = sun3_init_IRQ;
 
-        mach_gettimeoffset   = sun3x_gettimeoffset;
+        arch_gettimeoffset   = sun3x_gettimeoffset;
         mach_reset           = sun3x_reboot;
 
         mach_hwclk           = sun3x_hwclk;
diff --git a/arch/m68k/sun3x/time.c b/arch/m68k/sun3x/time.c
index 1d0a72480409..c8eb08add6b0 100644
--- a/arch/m68k/sun3x/time.c
+++ b/arch/m68k/sun3x/time.c
@@ -71,7 +71,7 @@ int sun3x_hwclk(int set, struct rtc_time *t)
         return 0;
 }
 /* Not much we can do here */
-unsigned long sun3x_gettimeoffset (void)
+u32 sun3x_gettimeoffset(void)
 {
     return 0L;
 }
diff --git a/arch/m68k/sun3x/time.h b/arch/m68k/sun3x/time.h
index 6909e1297534..a4f9126be7e2 100644
--- a/arch/m68k/sun3x/time.h
+++ b/arch/m68k/sun3x/time.h
@@ -2,7 +2,7 @@
 #define SUN3X_TIME_H
 
 extern int sun3x_hwclk(int set, struct rtc_time *t);
-unsigned long sun3x_gettimeoffset (void);
+u32 sun3x_gettimeoffset(void);
 void sun3x_sched_init(irq_handler_t vector);
 
 struct mostek_dt {
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 7fdcbd3f4da5..7d978c1bd528 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -1,3 +1,6 @@
+config CLKSRC_OF
+        bool
+
 config CLKSRC_I8253
         bool
 
@@ -25,6 +28,9 @@ config ARMADA_370_XP_TIMER
 config SUNXI_TIMER
         bool
 
+config VT8500_TIMER
+        bool
+
 config CLKSRC_NOMADIK_MTU
         bool
         depends on (ARCH_NOMADIK || ARCH_U8500)
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index f93453d01673..596c45c2f192 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o
 obj-$(CONFIG_ATMEL_TCB_CLKSRC)  += tcb_clksrc.o
 obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o
 obj-$(CONFIG_X86_PM_TIMER)      += acpi_pm.o
@@ -16,5 +17,7 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU)	+= clksrc-dbx500-prcmu.o
 obj-$(CONFIG_ARMADA_370_XP_TIMER)       += time-armada-370-xp.o
 obj-$(CONFIG_ARCH_BCM2835)      += bcm2835_timer.o
 obj-$(CONFIG_SUNXI_TIMER)       += sunxi_timer.o
+obj-$(CONFIG_ARCH_TEGRA)        += tegra20_timer.o
+obj-$(CONFIG_VT8500_TIMER)      += vt8500_timer.o
 
 obj-$(CONFIG_CLKSRC_ARM_GENERIC)        += arm_generic.o
diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c
index bc19f12c20ce..50c68fef944b 100644
--- a/drivers/clocksource/bcm2835_timer.c
+++ b/drivers/clocksource/bcm2835_timer.c
@@ -16,7 +16,6 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/bcm2835_timer.h>
 #include <linux/bitops.h>
 #include <linux/clockchips.h>
 #include <linux/clocksource.h>
@@ -101,7 +100,7 @@ static struct of_device_id bcm2835_time_match[] __initconst = {
         {}
 };
 
-static void __init bcm2835_time_init(void)
+static void __init bcm2835_timer_init(void)
 {
         struct device_node *node;
         void __iomem *base;
@@ -155,7 +154,5 @@ static void __init bcm2835_time_init(void)
 
         pr_info("bcm2835: system timer (irq = %d)\n", irq);
 }
-
-struct sys_timer bcm2835_timer = {
-        .init = bcm2835_time_init,
-};
+CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer",
+                        bcm2835_timer_init);
diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c
new file mode 100644
index 000000000000..bdabdaa8d00f
--- /dev/null
+++ b/drivers/clocksource/clksrc-of.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/init.h>
+#include <linux/of.h>
+
+extern struct of_device_id __clksrc_of_table[];
+
+static const struct of_device_id __clksrc_of_table_sentinel
+        __used __section(__clksrc_of_table_end);
+
+void __init clocksource_of_init(void)
+{
+        struct device_node *np;
+        const struct of_device_id *match;
+        void (*init_func)(void);
+
+        for_each_matching_node_and_match(np, __clksrc_of_table, &match) {
+                init_func = match->data;
+                init_func();
+        }
+}
diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c
index d9279385304d..ea210482dd20 100644
--- a/drivers/clocksource/cs5535-clockevt.c
+++ b/drivers/clocksource/cs5535-clockevt.c
@@ -100,7 +100,6 @@ static struct clock_event_device cs5535_clockevent = {
         .set_mode = mfgpt_set_mode,
         .set_next_event = mfgpt_next_event,
         .rating = 250,
-        .shift = 32
 };
 
 static irqreturn_t mfgpt_tick(int irq, void *dev_id)
@@ -169,17 +168,11 @@ static int __init cs5535_mfgpt_init(void)
         cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val);
 
         /* Set up the clock event */
-        cs5535_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC,
-                        cs5535_clockevent.shift);
-        cs5535_clockevent.min_delta_ns = clockevent_delta2ns(0xF,
-                        &cs5535_clockevent);
-        cs5535_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE,
-                        &cs5535_clockevent);
-
         printk(KERN_INFO DRV_NAME
                 ": Registering MFGPT timer as a clock event, using IRQ %d\n",
                 timer_irq);
-        clockevents_register_device(&cs5535_clockevent);
+        clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ,
+                                        0xF, 0xFFFE);
 
         return 0;
 
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index f7dba5b79b44..ab09ed3742ee 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -107,7 +107,7 @@ static const struct of_device_id osctimer_ids[] __initconst = {
         {},
 };
 
-static void __init timer_init(void)
+void __init dw_apb_timer_init(void)
 {
         struct device_node *event_timer, *source_timer;
 
@@ -125,7 +125,3 @@ static void __init timer_init(void)
 
         init_sched_clock();
 }
-
-struct sys_timer dw_apb_timer = {
-        .init = timer_init,
-};
diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c
index 8914c3c1c88b..025afc6dd324 100644
--- a/drivers/clocksource/nomadik-mtu.c
+++ b/drivers/clocksource/nomadik-mtu.c
@@ -134,12 +134,32 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode,
         }
 }
 
+void nmdk_clksrc_reset(void)
+{
+        /* Disable */
+        writel(0, mtu_base + MTU_CR(0));
+
+        /* ClockSource: configure load and background-load, and fire it up */
+        writel(nmdk_cycle, mtu_base + MTU_LR(0));
+        writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
+
+        writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
+               mtu_base + MTU_CR(0));
+}
+
+static void nmdk_clkevt_resume(struct clock_event_device *cedev)
+{
+        nmdk_clkevt_reset();
+        nmdk_clksrc_reset();
+}
+
 static struct clock_event_device nmdk_clkevt = {
         .name           = "mtu_1",
         .features       = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC,
         .rating         = 200,
         .set_mode       = nmdk_clkevt_mode,
         .set_next_event = nmdk_clkevt_next,
+        .resume         = nmdk_clkevt_resume,
 };
 
 /*
@@ -161,19 +181,6 @@ static struct irqaction nmdk_timer_irq = {
         .dev_id         = &nmdk_clkevt,
 };
 
-void nmdk_clksrc_reset(void)
-{
-        /* Disable */
-        writel(0, mtu_base + MTU_CR(0));
-
-        /* ClockSource: configure load and background-load, and fire it up */
-        writel(nmdk_cycle, mtu_base + MTU_LR(0));
-        writel(nmdk_cycle, mtu_base + MTU_BGLR(0));
-
-        writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA,
-               mtu_base + MTU_CR(0));
-}
-
 void __init nmdk_timer_init(void __iomem *base, int irq)
 {
         unsigned long rate;
diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c
index 93d09d0e009f..4086b9167159 100644
--- a/drivers/clocksource/sunxi_timer.c
+++ b/drivers/clocksource/sunxi_timer.c
@@ -74,7 +74,6 @@ static int sunxi_clkevt_next_event(unsigned long evt,
 
 static struct clock_event_device sunxi_clockevent = {
         .name = "sunxi_tick",
-        .shift = 32,
         .rating = 300,
         .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
         .set_mode = sunxi_clkevt_mode,
@@ -104,7 +103,7 @@ static struct of_device_id sunxi_timer_dt_ids[] = {
         { }
 };
 
-static void __init sunxi_timer_init(void)
+void __init sunxi_timer_init(void)
 {
         struct device_node *node;
         unsigned long rate = 0;
@@ -154,18 +153,8 @@ static void __init sunxi_timer_init(void)
         val = readl(timer_base + TIMER_CTL_REG);
         writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG);
 
-        sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL,
-                                NSEC_PER_SEC,
-                                sunxi_clockevent.shift);
-        sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff,
-                                                            &sunxi_clockevent);
-        sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1,
-                                                            &sunxi_clockevent);
         sunxi_clockevent.cpumask = cpumask_of(0);
 
-        clockevents_register_device(&sunxi_clockevent);
+        clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL,
+                                        0x1, 0xff);
 }
-
-struct sys_timer sunxi_timer = {
-        .init = sunxi_timer_init,
-};
diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c
index 32cb929b8eb6..8a6187225dd0 100644
--- a/drivers/clocksource/tcb_clksrc.c
+++ b/drivers/clocksource/tcb_clksrc.c
@@ -157,7 +157,6 @@ static struct tc_clkevt_device clkevt = {
                 .name           = "tc_clkevt",
                 .features       = CLOCK_EVT_FEAT_PERIODIC
                                         | CLOCK_EVT_FEAT_ONESHOT,
-                .shift          = 32,
                 /* Should be lower than at91rm9200's system timer */
                 .rating         = 125,
                 .set_next_event = tc_next_event,
@@ -196,13 +195,9 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx)
 
         timer_clock = clk32k_divisor_idx;
 
-        clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift);
-        clkevt.clkevt.max_delta_ns
-                = clockevent_delta2ns(0xffff, &clkevt.clkevt);
-        clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1;
         clkevt.clkevt.cpumask = cpumask_of(0);
 
-        clockevents_register_device(&clkevt.clkevt);
+        clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff);
 
         setup_irq(irq, &tc_irqaction);
 }
diff --git a/arch/arm/mach-tegra/timer.c b/drivers/clocksource/tegra20_timer.c
index e4863f3e9ee7..0bde03feb095 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/drivers/clocksource/tegra20_timer.c
@@ -1,6 +1,4 @@
 /*
- * arch/arch/mach-tegra/timer.c
- *
  * Copyright (C) 2010 Google, Inc.
  *
  * Author:
@@ -33,8 +31,6 @@
 #include <asm/smp_twd.h>
 #include <asm/sched_clock.h>
 
-#include "board.h"
-
 #define RTC_SECONDS            0x08
 #define RTC_SHADOW_SECONDS     0x0c
 #define RTC_MILLISECONDS       0x10
@@ -168,7 +164,7 @@ static const struct of_device_id rtc_match[] __initconst = {
         {}
 };
 
-static void __init tegra_init_timer(void)
+static void __init tegra20_init_timer(void)
 {
         struct device_node *np;
         struct clk *clk;
@@ -183,7 +179,7 @@ static void __init tegra_init_timer(void)
 
         timer_reg_base = of_iomap(np, 0);
         if (!timer_reg_base) {
-                pr_err("Can't map timer registers");
+                pr_err("Can't map timer registers\n");
                 BUG();
         }
 
@@ -259,23 +255,16 @@ static void __init tegra_init_timer(void)
                 BUG();
         }
 
-        clockevents_calc_mult_shift(&tegra_clockevent, 1000000, 5);
-        tegra_clockevent.max_delta_ns =
-                clockevent_delta2ns(0x1fffffff, &tegra_clockevent);
-        tegra_clockevent.min_delta_ns =
-                clockevent_delta2ns(0x1, &tegra_clockevent);
         tegra_clockevent.cpumask = cpu_all_mask;
         tegra_clockevent.irq = tegra_timer_irq.irq;
-        clockevents_register_device(&tegra_clockevent);
+        clockevents_config_and_register(&tegra_clockevent, 1000000,
+                                        0x1, 0x1fffffff);
 #ifdef CONFIG_HAVE_ARM_TWD
         twd_local_timer_of_register();
 #endif
         register_persistent_clock(NULL, tegra_read_persistent_clock);
 }
-
-struct sys_timer tegra_sys_timer = {
-        .init = tegra_init_timer,
-};
+CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer);
 
 #ifdef CONFIG_PM
 static u32 usec_config;
diff --git a/arch/arm/mach-vt8500/timer.c b/drivers/clocksource/vt8500_timer.c
index 3dd21a47881f..8efc86b5b5dd 100644
--- a/arch/arm/mach-vt8500/timer.c
+++ b/drivers/clocksource/vt8500_timer.c
@@ -134,7 +134,7 @@ static struct of_device_id vt8500_timer_ids[] = {
         { }
 };
 
-void __init vt8500_timer_init(void)
+static void __init vt8500_timer_init(void)
 {
         struct device_node *np;
         int timer_irq;
@@ -168,17 +168,13 @@ void __init vt8500_timer_init(void)
                 pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n",
                                         __func__, clocksource.name);
 
-        clockevents_calc_mult_shift(&clockevent, VT8500_TIMER_HZ, 4);
-
-        /* copy-pasted from mach-msm; no idea */
-        clockevent.max_delta_ns =
-                clockevent_delta2ns(0xf0000000, &clockevent);
-        clockevent.min_delta_ns = clockevent_delta2ns(4, &clockevent);
         clockevent.cpumask = cpumask_of(0);
 
         if (setup_irq(timer_irq, &irq))
                 pr_err("%s: setup_irq failed for %s\n", __func__,
                                                         clockevent.name);
-        clockevents_register_device(&clockevent);
+        clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ,
+                                        4, 0xf0000000);
 }
 
+CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init)
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 79a84860ea56..48a1988149d8 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
-#include <mach/id.h>
 
 static struct cpufreq_frequency_table *freq_table;
 static struct clk *armss_clk;
@@ -165,9 +164,6 @@ static struct platform_driver db8500_cpufreq_plat_driver = {
 
 static int __init db8500_cpufreq_register(void)
 {
-        if (!cpu_is_u8500_family())
-                return -ENODEV;
-
         pr_info("cpufreq for DB8500 started\n");
         return platform_driver_register(&db8500_cpufreq_plat_driver);
 }
diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c
index 69b676dd3358..78057a357ddb 100644
--- a/drivers/cpufreq/exynos-cpufreq.c
+++ b/drivers/cpufreq/exynos-cpufreq.c
@@ -18,10 +18,10 @@
 #include <linux/cpufreq.h>
 #include <linux/suspend.h>
 
-#include <mach/cpufreq.h>
-
 #include <plat/cpu.h>
 
+#include "exynos-cpufreq.h"
+
 static struct exynos_dvfs_info *exynos_info;
 
 static struct regulator *arm_regulator;
diff --git a/arch/arm/mach-exynos/include/mach/cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h
index b5d39dd03b2a..92b852ee5ddc 100644
--- a/arch/arm/mach-exynos/include/mach/cpufreq.h
+++ b/drivers/cpufreq/exynos-cpufreq.h
@@ -1,5 +1,4 @@
-/* linux/arch/arm/mach-exynos/include/mach/cpufreq.h
- *
+/*
  * Copyright (c) 2010 Samsung Electronics Co., Ltd.
  *              http://www.samsung.com
  *
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index de91755e2556..add7fbec4fc9 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -18,7 +18,8 @@
 #include <linux/cpufreq.h>
 
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c
index 0661039e5d4a..08b7477b0aa2 100644
--- a/drivers/cpufreq/exynos4x12-cpufreq.c
+++ b/drivers/cpufreq/exynos4x12-cpufreq.c
@@ -18,7 +18,8 @@
 #include <linux/cpufreq.h>
 
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c
index b9344869f822..9fae466d7746 100644
--- a/drivers/cpufreq/exynos5250-cpufreq.c
+++ b/drivers/cpufreq/exynos5250-cpufreq.c
@@ -19,7 +19,8 @@
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
-#include <mach/cpufreq.h>
+
+#include "exynos-cpufreq.h"
 
 static struct clk *cpu_clk;
 static struct clk *moutcore;
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index b2016ed941ac..b3643ff007e4 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -38,7 +38,6 @@
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
-#include <plat/gpio-fns.h>
 #include <plat/pm.h>
 
 int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip,
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index 62ca575701d3..a350969e5efe 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -1,3 +1,30 @@
+config IRQCHIP
+        def_bool y
+        depends on OF_IRQ
+
+config ARM_GIC
+        bool
+        select IRQ_DOMAIN
+        select MULTI_IRQ_HANDLER
+
+config GIC_NON_BANKED
+        bool
+
+config ARM_VIC
+        bool
+        select IRQ_DOMAIN
+        select MULTI_IRQ_HANDLER
+
+config ARM_VIC_NR
+        int
+        default 4 if ARCH_S5PV210
+        default 3 if ARCH_S5PC100
+        default 2
+        depends on ARM_VIC
+        help
+          The maximum number of VICs available in the system, for
+          power management.
+
 config VERSATILE_FPGA_IRQ
         bool
         select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index bf4609a5bd9d..e65fbf2cdf71 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -1,4 +1,9 @@
+obj-$(CONFIG_IRQCHIP)                   += irqchip.o
+
 obj-$(CONFIG_ARCH_BCM2835)              += irq-bcm2835.o
+obj-$(CONFIG_ARCH_EXYNOS)               += exynos-combiner.o
 obj-$(CONFIG_ARCH_SUNXI)                += irq-sunxi.o
-obj-$(CONFIG_VERSATILE_FPGA_IRQ)        += irq-versatile-fpga.o
 obj-$(CONFIG_ARCH_SPEAR3XX)             += spear-shirq.o
+obj-$(CONFIG_ARM_GIC)                   += irq-gic.o
+obj-$(CONFIG_ARM_VIC)                   += irq-vic.o
+obj-$(CONFIG_VERSATILE_FPGA_IRQ)        += irq-versatile-fpga.o
diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c
new file mode 100644
index 000000000000..04d86a9803f4
--- /dev/null
+++ b/drivers/irqchip/exynos-combiner.c
@@ -0,0 +1,230 @@
+/*
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ *              http://www.samsung.com
+ *
+ * Combiner irqchip for EXYNOS
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/mach/irq.h>
+
+#include <plat/cpu.h>
+
+#include "irqchip.h"
+
+#define COMBINER_ENABLE_SET     0x0
+#define COMBINER_ENABLE_CLEAR   0x4
+#define COMBINER_INT_STATUS     0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+        unsigned int irq_offset;
+        unsigned int irq_mask;
+        void __iomem *base;
+};
+
+static struct irq_domain *combiner_irq_domain;
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+        struct combiner_chip_data *combiner_data =
+                irq_data_get_irq_chip_data(data);
+
+        return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+        u32 mask = 1 << (data->hwirq % 32);
+
+        __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+        u32 mask = 1 << (data->hwirq % 32);
+
+        __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+        struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+        struct irq_chip *chip = irq_get_chip(irq);
+        unsigned int cascade_irq, combiner_irq;
+        unsigned long status;
+
+        chained_irq_enter(chip, desc);
+
+        spin_lock(&irq_controller_lock);
+        status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+        spin_unlock(&irq_controller_lock);
+        status &= chip_data->irq_mask;
+
+        if (status == 0)
+                goto out;
+
+        combiner_irq = __ffs(status);
+
+        cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+        if (unlikely(cascade_irq >= NR_IRQS))
+                do_bad_IRQ(cascade_irq, desc);
+        else
+                generic_handle_irq(cascade_irq);
+
+ out:
+        chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+        .name           = "COMBINER",
+        .irq_mask       = combiner_mask_irq,
+        .irq_unmask     = combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+        unsigned int max_nr;
+
+        if (soc_is_exynos5250())
+                max_nr = EXYNOS5_MAX_COMBINER_NR;
+        else
+                max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+        if (combiner_nr >= max_nr)
+                BUG();
+        if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+                BUG();
+        irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init_one(unsigned int combiner_nr,
+                                     void __iomem *base)
+{
+        combiner_data[combiner_nr].base = base;
+        combiner_data[combiner_nr].irq_offset = irq_find_mapping(
+                combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER);
+        combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+        /* Disable all interrupts */
+        __raw_writel(combiner_data[combiner_nr].irq_mask,
+                     base + COMBINER_ENABLE_CLEAR);
+}
+
+#ifdef CONFIG_OF
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+                                     struct device_node *controller,
+                                     const u32 *intspec, unsigned int intsize,
+                                     unsigned long *out_hwirq,
+                                     unsigned int *out_type)
+{
+        if (d->of_node != controller)
+                return -EINVAL;
+
+        if (intsize < 2)
+                return -EINVAL;
+
+        *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1];
+        *out_type = 0;
+
+        return 0;
+}
+#else
+static int combiner_irq_domain_xlate(struct irq_domain *d,
+                                     struct device_node *controller,
+                                     const u32 *intspec, unsigned int intsize,
+                                     unsigned long *out_hwirq,
+                                     unsigned int *out_type)
+{
+        return -EINVAL;
+}
+#endif
+
+static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq,
+                                   irq_hw_number_t hw)
+{
+        irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq);
+        irq_set_chip_data(irq, &combiner_data[hw >> 3]);
+        set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+
+        return 0;
+}
+
+static struct irq_domain_ops combiner_irq_domain_ops = {
+        .xlate  = combiner_irq_domain_xlate,
+        .map    = combiner_irq_domain_map,
+};
+
+void __init combiner_init(void __iomem *combiner_base,
+                          struct device_node *np)
+{
+        int i, irq, irq_base;
+        unsigned int max_nr, nr_irq;
+
+        if (np) {
+                if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) {
+                        pr_warning("%s: number of combiners not specified, "
+                                "setting default as %d.\n",
+                                __func__, EXYNOS4_MAX_COMBINER_NR);
+                        max_nr = EXYNOS4_MAX_COMBINER_NR;
+                }
+        } else {
+                max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR :
+                                                EXYNOS4_MAX_COMBINER_NR;
+        }
+        nr_irq = max_nr * MAX_IRQ_IN_COMBINER;
+
+        irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0);
+        if (IS_ERR_VALUE(irq_base)) {
+                irq_base = COMBINER_IRQ(0, 0);
+                pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base);
+        }
+
+        combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0,
+                                &combiner_irq_domain_ops, &combiner_data);
+        if (WARN_ON(!combiner_irq_domain)) {
+                pr_warning("%s: irq domain init failed\n", __func__);
+                return;
+        }
+
+        for (i = 0; i < max_nr; i++) {
+                combiner_init_one(i, combiner_base + (i >> 2) * 0x10);
+                irq = IRQ_SPI(i);
+#ifdef CONFIG_OF
+                if (np)
+                        irq = irq_of_parse_and_map(np, i);
+#endif
+                combiner_cascade_irq(i, irq);
+        }
+}
+
+#ifdef CONFIG_OF
+static int __init combiner_of_init(struct device_node *np,
+                                   struct device_node *parent)
+{
+        void __iomem *combiner_base;
+
+        combiner_base = of_iomap(np, 0);
+        if (!combiner_base) {
+                pr_err("%s: failed to map combiner registers\n", __func__);
+                return -ENXIO;
+        }
+
+        combiner_init(combiner_base, np);
+
+        return 0;
+}
+IRQCHIP_DECLARE(exynos4210_combiner, "samsung,exynos4210-combiner",
+                combiner_of_init);
+#endif
diff --git a/arch/arm/common/gic.c b/drivers/irqchip/irq-gic.c
index 87dfa9026c5b..644d72468423 100644
--- a/arch/arm/common/gic.c
+++ b/drivers/irqchip/irq-gic.c
@@ -38,12 +38,14 @@
 #include <linux/interrupt.h>
 #include <linux/percpu.h>
 #include <linux/slab.h>
+#include <linux/irqchip/arm-gic.h>
 
 #include <asm/irq.h>
 #include <asm/exception.h>
 #include <asm/smp_plat.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware/gic.h>
+
+#include "irqchip.h"
 
 union gic_base {
         void __iomem *common_base;
@@ -276,7 +278,7 @@ static int gic_set_wake(struct irq_data *d, unsigned int on)
 #define gic_set_wake    NULL
 #endif
 
-asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
+static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
 {
         u32 irqstat, irqnr;
         struct gic_chip_data *gic = &gic_data[0];
@@ -638,6 +640,27 @@ static void __init gic_pm_init(struct gic_chip_data *gic)
 }
 #endif
 
+#ifdef CONFIG_SMP
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
+{
+        int cpu;
+        unsigned long map = 0;
+
+        /* Convert our logical CPU mask into a physical one. */
+        for_each_cpu(cpu, mask)
+                map |= 1 << cpu_logical_map(cpu);
+
+        /*
+         * Ensure that stores to Normal memory are visible to the
+         * other CPUs before issuing the IPI.
+         */
+        dsb();
+
+        /* this always happens on GIC0 */
+        writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
+}
+#endif
+
 static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq,
                                 irq_hw_number_t hw)
 {
@@ -764,6 +787,12 @@ void __init gic_init_bases(unsigned int gic_nr, int irq_start,
         if (WARN_ON(!gic->domain))
                 return;
 
+#ifdef CONFIG_SMP
+        set_smp_cross_call(gic_raise_softirq);
+#endif
+
+        set_handle_irq(gic_handle_irq);
+
         gic_chip.flags |= gic_arch_extn.flags;
         gic_dist_init(gic);
         gic_cpu_init(gic);
@@ -777,27 +806,6 @@ void __cpuinit gic_secondary_init(unsigned int gic_nr)
         gic_cpu_init(&gic_data[gic_nr]);
 }
 
-#ifdef CONFIG_SMP
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
-{
-        int cpu;
-        unsigned long map = 0;
-
-        /* Convert our logical CPU mask into a physical one. */
-        for_each_cpu(cpu, mask)
-                map |= gic_cpu_map[cpu];
-
-        /*
-         * Ensure that stores to Normal memory are visible to the
-         * other CPUs before issuing the IPI.
-         */
-        dsb();
-
-        /* this always happens on GIC0 */
-        writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT);
-}
-#endif
-
 #ifdef CONFIG_OF
 static int gic_cnt __initdata = 0;
 
@@ -829,4 +837,9 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
         gic_cnt++;
         return 0;
 }
+IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
+IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
+IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
+IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
+
 #endif
diff --git a/arch/arm/common/vic.c b/drivers/irqchip/irq-vic.c
index 8f324b99416e..3cf97aaebe40 100644
--- a/arch/arm/common/vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -30,10 +30,29 @@
 #include <linux/syscore_ops.h>
 #include <linux/device.h>
 #include <linux/amba/bus.h>
+#include <linux/irqchip/arm-vic.h>
 
 #include <asm/exception.h>
 #include <asm/mach/irq.h>
-#include <asm/hardware/vic.h>
+
+#include "irqchip.h"
+
+#define VIC_IRQ_STATUS                  0x00
+#define VIC_FIQ_STATUS                  0x04
+#define VIC_INT_SELECT                  0x0c    /* 1 = FIQ, 0 = IRQ */
+#define VIC_INT_SOFT                    0x18
+#define VIC_INT_SOFT_CLEAR              0x1c
+#define VIC_PROTECT                     0x20
+#define VIC_PL190_VECT_ADDR             0x30    /* PL190 only */
+#define VIC_PL190_DEF_VECT_ADDR         0x34    /* PL190 only */
+
+#define VIC_VECT_ADDR0                  0x100   /* 0 to 15 (0..31 PL192) */
+#define VIC_VECT_CNTL0                  0x200   /* 0 to 15 (0..31 PL192) */
+#define VIC_ITCR                        0x300   /* VIC test control register */
+
+#define VIC_VECT_CNTL_ENABLE            (1 << 5)
+
+#define VIC_PL192_VECT_ADDR             0xF00
 
 /**
  * struct vic_device - VIC PM device
@@ -66,6 +85,8 @@ static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
 
 static int vic_id;
 
+static void vic_handle_irq(struct pt_regs *regs);
+
 /**
  * vic_init2 - common initialisation code
  * @base: Base of the VIC.
@@ -182,6 +203,40 @@ static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq,
         return 0;
 }
 
+/*
+ * Handle each interrupt in a single VIC.  Returns non-zero if we've
+ * handled at least one interrupt.  This reads the status register
+ * before handling each interrupt, which is necessary given that
+ * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
+ */
+static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
+{
+        u32 stat, irq;
+        int handled = 0;
+
+        while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
+                irq = ffs(stat) - 1;
+                handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
+                handled = 1;
+        }
+
+        return handled;
+}
+
+/*
+ * Keep iterating over all registered VIC's until there are no pending
+ * interrupts.
+ */
+static asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
+{
+        int i, handled;
+
+        do {
+                for (i = 0, handled = 0; i < vic_id; ++i)
+                        handled |= handle_one_vic(&vic_devices[i], regs);
+        } while (handled);
+}
+
 static struct irq_domain_ops vic_irqdomain_ops = {
         .map = vic_irqdomain_map,
         .xlate = irq_domain_xlate_onetwocell,
@@ -218,6 +273,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
         v->valid_sources = valid_sources;
         v->resume_sources = resume_sources;
         v->irq = irq;
+        set_handle_irq(vic_handle_irq);
         vic_id++;
         v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
                                           &vic_irqdomain_ops, v);
@@ -427,38 +483,7 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
 
         return 0;
 }
+IRQCHIP_DECLARE(arm_pl190_vic, "arm,pl190-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_pl192_vic, "arm,pl192-vic", vic_of_init);
+IRQCHIP_DECLARE(arm_versatile_vic, "arm,versatile-vic", vic_of_init);
 #endif /* CONFIG OF */
-
-/*
- * Handle each interrupt in a single VIC.  Returns non-zero if we've
- * handled at least one interrupt.  This reads the status register
- * before handling each interrupt, which is necessary given that
- * handle_IRQ may briefly re-enable interrupts for soft IRQ handling.
- */
-static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
-{
-        u32 stat, irq;
-        int handled = 0;
-
-        while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
-                irq = ffs(stat) - 1;
-                handle_IRQ(irq_find_mapping(vic->domain, irq), regs);
-                handled = 1;
-        }
-
-        return handled;
-}
-
-/*
- * Keep iterating over all registered VIC's until there are no pending
- * interrupts.
- */
-asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs)
-{
-        int i, handled;
-
-        do {
-                for (i = 0, handled = 0; i < vic_id; ++i)
-                        handled |= handle_one_vic(&vic_devices[i], regs);
-        } while (handled);
-}
diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c
new file mode 100644
index 000000000000..f496afce29de
--- /dev/null
+++ b/drivers/irqchip/irqchip.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_irq.h>
+
+#include "irqchip.h"
+
+/*
+ * This special of_device_id is the sentinel at the end of the
+ * of_device_id[] array of all irqchips. It is automatically placed at
+ * the end of the array by the linker, thanks to being part of a
+ * special section.
+ */
+static const struct of_device_id
+irqchip_of_match_end __used __section(__irqchip_of_end);
+
+extern struct of_device_id __irqchip_begin[];
+
+void __init irqchip_init(void)
+{
+        of_irq_init(__irqchip_begin);
+}
diff --git a/drivers/irqchip/irqchip.h b/drivers/irqchip/irqchip.h
new file mode 100644
index 000000000000..e445ba2d6add
--- /dev/null
+++ b/drivers/irqchip/irqchip.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _IRQCHIP_H
+#define _IRQCHIP_H
+
+/*
+ * This macro must be used by the different irqchip drivers to declare
+ * the association between their DT compatible string and their
+ * initialization function.
+ *
+ * @name: name that must be unique accross all IRQCHIP_DECLARE of the
+ * same file.
+ * @compstr: compatible string of the irqchip driver
+ * @fn: initialization function
+ */
+#define IRQCHIP_DECLARE(name,compstr,fn)                                \
+        static const struct of_device_id irqchip_of_match_##name        \
+        __used __section(__irqchip_of_table)                            \
+        = { .compatible = compstr, .data = fn }
+
+#endif
diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c
index 80e1d2fd9d4c..8527743b5cef 100644
--- a/drivers/irqchip/spear-shirq.c
+++ b/drivers/irqchip/spear-shirq.c
@@ -25,6 +25,8 @@
 #include <linux/of_irq.h>
 #include <linux/spinlock.h>
 
+#include "irqchip.h"
+
 static DEFINE_SPINLOCK(lock);
 
 /* spear300 shared irq registers offsets and masks */
@@ -300,6 +302,7 @@ int __init spear300_shirq_of_init(struct device_node *np,
         return shirq_init(spear300_shirq_blocks,
                         ARRAY_SIZE(spear300_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear300_shirq, "st,spear300-shirq", spear300_shirq_of_init);
 
 int __init spear310_shirq_of_init(struct device_node *np,
                 struct device_node *parent)
@@ -307,6 +310,7 @@ int __init spear310_shirq_of_init(struct device_node *np,
         return shirq_init(spear310_shirq_blocks,
                         ARRAY_SIZE(spear310_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear310_shirq, "st,spear310-shirq", spear310_shirq_of_init);
 
 int __init spear320_shirq_of_init(struct device_node *np,
                 struct device_node *parent)
@@ -314,3 +318,4 @@ int __init spear320_shirq_of_init(struct device_node *np,
         return shirq_init(spear320_shirq_blocks,
                         ARRAY_SIZE(spear320_shirq_blocks), np);
 }
+IRQCHIP_DECLARE(spear320_shirq, "st,spear320-shirq", spear320_shirq_of_init);
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 268f45d42394..1192518e1aca 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -26,22 +26,18 @@
 #include <linux/fs.h>
 #include <linux/platform_device.h>
 #include <linux/uaccess.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/dbx500-prcmu.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
 #include <linux/cpufreq.h>
-#include <asm/hardware/gic.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/db8500-regs.h>
-#include <mach/id.h>
 #include "dbx500-prcmu-regs.h"
 
-/* Offset for the firmware version within the TCPM */
-#define PRCMU_FW_VERSION_OFFSET 0xA4
-
 /* Index of different voltages to be used when accessing AVSData */
 #define PRCM_AVS_BASE           0x2FC
 #define PRCM_AVS_VBB_RET        (PRCM_AVS_BASE + 0x0)
@@ -216,10 +212,8 @@
 #define PRCM_REQ_MB5_I2C_HW_BITS        (PRCM_REQ_MB5 + 0x1)
 #define PRCM_REQ_MB5_I2C_REG            (PRCM_REQ_MB5 + 0x2)
 #define PRCM_REQ_MB5_I2C_VAL            (PRCM_REQ_MB5 + 0x3)
-#define PRCMU_I2C_WRITE(slave) \
-        (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define PRCMU_I2C_READ(slave) \
-        (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
+#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
+#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
 #define PRCMU_I2C_STOP_EN               BIT(3)
 
 /* Mailbox 5 ACKs */
@@ -1049,12 +1043,13 @@ int db8500_prcmu_get_ddr_opp(void)
  *
  * This function sets the operating point of the DDR.
  */
+static bool enable_set_ddr_opp;
 int db8500_prcmu_set_ddr_opp(u8 opp)
 {
         if (opp < DDR_100_OPP || opp > DDR_25_OPP)
                 return -EINVAL;
         /* Changing the DDR OPP can hang the hardware pre-v21 */
-        if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20())
+        if (enable_set_ddr_opp)
                 writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
 
         return 0;
@@ -2706,21 +2701,43 @@ static struct irq_chip prcmu_irq_chip = {
         .irq_unmask     = prcmu_irq_unmask,
 };
 
-static char *fw_project_name(u8 project)
+static __init char *fw_project_name(u32 project)
 {
         switch (project) {
         case PRCMU_FW_PROJECT_U8500:
                 return "U8500";
-        case PRCMU_FW_PROJECT_U8500_C2:
-                return "U8500 C2";
+        case PRCMU_FW_PROJECT_U8400:
+                return "U8400";
         case PRCMU_FW_PROJECT_U9500:
                 return "U9500";
-        case PRCMU_FW_PROJECT_U9500_C2:
-                return "U9500 C2";
+        case PRCMU_FW_PROJECT_U8500_MBB:
+                return "U8500 MBB";
+        case PRCMU_FW_PROJECT_U8500_C1:
+                return "U8500 C1";
+        case PRCMU_FW_PROJECT_U8500_C2:
+                return "U8500 C2";
+        case PRCMU_FW_PROJECT_U8500_C3:
+                return "U8500 C3";
+        case PRCMU_FW_PROJECT_U8500_C4:
+                return "U8500 C4";
+        case PRCMU_FW_PROJECT_U9500_MBL:
+                return "U9500 MBL";
+        case PRCMU_FW_PROJECT_U8500_MBL:
+                return "U8500 MBL";
+        case PRCMU_FW_PROJECT_U8500_MBL2:
+                return "U8500 MBL2";
         case PRCMU_FW_PROJECT_U8520:
-                return "U8520";
+                return "U8520 MBL";
         case PRCMU_FW_PROJECT_U8420:
                 return "U8420";
+        case PRCMU_FW_PROJECT_U9540:
+                return "U9540";
+        case PRCMU_FW_PROJECT_A9420:
+                return "A9420";
+        case PRCMU_FW_PROJECT_L8540:
+                return "L8540";
+        case PRCMU_FW_PROJECT_L8580:
+                return "L8580";
         default:
                 return "Unknown";
         }
@@ -2766,36 +2783,44 @@ static int db8500_irq_init(struct device_node *np)
         return 0;
 }
 
-void __init db8500_prcmu_early_init(void)
+static void dbx500_fw_version_init(struct platform_device *pdev,
+                            u32 version_offset)
 {
-        if (cpu_is_u8500v2() || cpu_is_u9540()) {
-                void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
-
-                if (tcpm_base != NULL) {
-                        u32 version;
-                        version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET);
-                        fw_info.version.project = version & 0xFF;
-                        fw_info.version.api_version = (version >> 8) & 0xFF;
-                        fw_info.version.func_version = (version >> 16) & 0xFF;
-                        fw_info.version.errata = (version >> 24) & 0xFF;
-                        fw_info.valid = true;
-                        pr_info("PRCMU firmware: %s, version %d.%d.%d\n",
-                                fw_project_name(fw_info.version.project),
-                                (version >> 8) & 0xFF, (version >> 16) & 0xFF,
-                                (version >> 24) & 0xFF);
-                        iounmap(tcpm_base);
-                }
+        struct resource *res;
+        void __iomem *tcpm_base;
 
-                if (cpu_is_u9540())
-                        tcdm_base = ioremap_nocache(U8500_PRCMU_TCDM_BASE,
-                                                SZ_4K + SZ_8K) + SZ_8K;
-                else
-                        tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE);
-        } else {
-                pr_err("prcmu: Unsupported chip version\n");
-                BUG();
+        res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+                                           "prcmu-tcpm");
+        if (!res) {
+                dev_err(&pdev->dev,
+                        "Error: no prcmu tcpm memory region provided\n");
+                return;
         }
+        tcpm_base = ioremap(res->start, resource_size(res));
+        if (tcpm_base != NULL) {
+                u32 version;
+
+                version = readl(tcpm_base + version_offset);
+                fw_info.version.project = (version & 0xFF);
+                fw_info.version.api_version = (version >> 8) & 0xFF;
+                fw_info.version.func_version = (version >> 16) & 0xFF;
+                fw_info.version.errata = (version >> 24) & 0xFF;
+                strncpy(fw_info.version.project_name,
+                        fw_project_name(fw_info.version.project),
+                        PRCMU_FW_PROJECT_NAME_LEN);
+                fw_info.valid = true;
+                pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
+                        fw_info.version.project_name,
+                        fw_info.version.project,
+                        fw_info.version.api_version,
+                        fw_info.version.func_version,
+                        fw_info.version.errata);
+                iounmap(tcpm_base);
+        }
+}
 
+void __init db8500_prcmu_early_init(void)
+{
         spin_lock_init(&mb0_transfer.lock);
         spin_lock_init(&mb0_transfer.dbb_irqs_lock);
         mutex_init(&mb0_transfer.ac_wake_lock);
@@ -3105,23 +3130,30 @@ static void db8500_prcmu_update_cpufreq(void)
  */
 static int db8500_prcmu_probe(struct platform_device *pdev)
 {
-        struct ab8500_platform_data *ab8500_platdata = pdev->dev.platform_data;
         struct device_node *np = pdev->dev.of_node;
+        struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev);
         int irq = 0, err = 0, i;
-
-        if (ux500_is_svp())
-                return -ENODEV;
+        struct resource *res;
 
         init_prcm_registers();
 
+        dbx500_fw_version_init(pdev, pdata->version_offset);
+        res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
+        if (!res) {
+                dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
+                return -ENOENT;
+        }
+        tcdm_base = devm_ioremap(&pdev->dev, res->start,
+                        resource_size(res));
+
         /* Clean up the mailbox interrupts after pre-kernel code. */
         writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
 
-        if (np)
-                irq = platform_get_irq(pdev, 0);
-
-        if (!np || irq <= 0)
-                irq = IRQ_DB8500_PRCMU1;
+        irq = platform_get_irq(pdev, 0);
+        if (irq <= 0) {
+                dev_err(&pdev->dev, "no prcmu irq provided\n");
+                return -ENOENT;
+        }
 
         err = request_threaded_irq(irq, prcmu_irq_handler,
                 prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
@@ -3135,13 +3167,12 @@ static int db8500_prcmu_probe(struct platform_device *pdev)
 
         for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) {
                 if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) {
-                        db8500_prcmu_devs[i].platform_data = ab8500_platdata;
+                        db8500_prcmu_devs[i].platform_data = pdata->ab_platdata;
                         db8500_prcmu_devs[i].pdata_size = sizeof(struct ab8500_platform_data);
                 }
         }
 
-        if (cpu_is_u8500v20_or_later())
-                prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
+        prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET);
 
         db8500_prcmu_update_cpufreq();
 
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index c1fe60ad1540..afa12c7a025c 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -149,6 +149,24 @@
 #define TRACE_SYSCALLS()
 #endif
 
+#ifdef CONFIG_CLKSRC_OF
+#define CLKSRC_OF_TABLES() . = ALIGN(8);                                \
+                           VMLINUX_SYMBOL(__clksrc_of_table) = .;       \
+                           *(__clksrc_of_table)                         \
+                           *(__clksrc_of_table_end)
+#else
+#define CLKSRC_OF_TABLES()
+#endif
+
+#ifdef CONFIG_IRQCHIP
+#define IRQCHIP_OF_MATCH_TABLE()                                        \
+        . = ALIGN(8);                                                   \
+        VMLINUX_SYMBOL(__irqchip_begin) = .;                            \
+        *(__irqchip_of_table)                                           \
+        *(__irqchip_of_end)
+#else
+#define IRQCHIP_OF_MATCH_TABLE()
+#endif
 
 #ifdef CONFIG_COMMON_CLK
 #define CLK_OF_TABLES() . = ALIGN(8);                           \
@@ -503,7 +521,9 @@
         CPU_DISCARD(init.rodata)                                        \
         MEM_DISCARD(init.rodata)                                        \
         CLK_OF_TABLES()                                                 \
-        KERNEL_DTB()
+        CLKSRC_OF_TABLES()                                              \
+        KERNEL_DTB()                                                    \
+        IRQCHIP_OF_MATCH_TABLE()
 
 #define INIT_TEXT                                                       \
         *(.init.text)                                                   \
diff --git a/include/linux/bcm2835_timer.h b/include/linux/bcm2835_timer.h
deleted file mode 100644
index 25680fe0903c..000000000000
--- a/include/linux/bcm2835_timer.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright 2012 Simon Arlott
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __BCM2835_TIMER_H
-#define __BCM2835_TIMER_H
-
-#include <asm/mach/time.h>
-
-extern struct sys_timer bcm2835_timer;
-
-#endif
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index 4dceaf8ae152..27cfda427dd9 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -332,4 +332,15 @@ extern int clocksource_mmio_init(void __iomem *, const char *,
 
 extern int clocksource_i8253_init(void);
 
+#ifdef CONFIG_CLKSRC_OF
+extern void clocksource_of_init(void);
+
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)                        \
+        static const struct of_device_id __clksrc_of_table_##name       \
+                __used __section(__clksrc_of_table)                     \
+                 = { .compatible = compat, .data = fn };
+#else
+#define CLOCKSOURCE_OF_DECLARE(name, compat, fn)
+#endif
+
 #endif /* _LINUX_CLOCKSOURCE_H */
diff --git a/include/linux/dw_apb_timer.h b/include/linux/dw_apb_timer.h
index 1148575fd134..dd755ce2a5eb 100644
--- a/include/linux/dw_apb_timer.h
+++ b/include/linux/dw_apb_timer.h
@@ -53,5 +53,5 @@ void dw_apb_clocksource_start(struct dw_apb_clocksource *dw_cs);
 cycle_t dw_apb_clocksource_read(struct dw_apb_clocksource *dw_cs);
 void dw_apb_clocksource_unregister(struct dw_apb_clocksource *dw_cs);
 
-extern struct sys_timer dw_apb_timer;
+extern void dw_apb_timer_init(void);
 #endif /* __DW_APB_TIMER_H__ */
diff --git a/include/linux/irqchip.h b/include/linux/irqchip.h
new file mode 100644
index 000000000000..e0006f1d35a0
--- /dev/null
+++ b/include/linux/irqchip.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef _LINUX_IRQCHIP_H
+#define _LINUX_IRQCHIP_H
+
+void irqchip_init(void);
+
+#endif
diff --git a/arch/arm/include/asm/hardware/gic.h b/include/linux/irqchip/arm-gic.h
index 4b1ce6cd477f..a67ca55e6f4e 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/include/linux/irqchip/arm-gic.h
@@ -1,5 +1,5 @@
 /*
- *  arch/arm/include/asm/hardware/gic.h
+ *  include/linux/irqchip/arm-gic.h
  *
  *  Copyright (C) 2002 ARM Limited, All Rights Reserved.
  *
@@ -7,10 +7,8 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_ARM_HARDWARE_GIC_H
-#define __ASM_ARM_HARDWARE_GIC_H
-
-#include <linux/compiler.h>
+#ifndef __LINUX_IRQCHIP_ARM_GIC_H
+#define __LINUX_IRQCHIP_ARM_GIC_H
 
 #define GIC_CPU_CTRL                    0x00
 #define GIC_CPU_PRIMASK                 0x04
@@ -32,19 +30,14 @@
 #define GIC_DIST_CONFIG                 0xc00
 #define GIC_DIST_SOFTINT                0xf00
 
-#ifndef __ASSEMBLY__
-#include <linux/irqdomain.h>
 struct device_node;
 
 extern struct irq_chip gic_arch_extn;
 
 void gic_init_bases(unsigned int, int, void __iomem *, void __iomem *,
                     u32 offset, struct device_node *);
-int gic_of_init(struct device_node *node, struct device_node *parent);
 void gic_secondary_init(unsigned int);
-void gic_handle_irq(struct pt_regs *regs);
 void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
 
 static inline void gic_init(unsigned int nr, int start,
                             void __iomem *dist , void __iomem *cpu)
@@ -53,5 +46,3 @@ static inline void gic_init(unsigned int nr, int start,
 }
 
 #endif
-
-#endif
diff --git a/arch/arm/include/asm/hardware/vic.h b/include/linux/irqchip/arm-vic.h
index 2bebad36fc83..e3c82dc95756 100644
--- a/arch/arm/include/asm/hardware/vic.h
+++ b/include/linux/irqchip/arm-vic.h
@@ -20,29 +20,11 @@
 #ifndef __ASM_ARM_HARDWARE_VIC_H
 #define __ASM_ARM_HARDWARE_VIC_H
 
-#define VIC_IRQ_STATUS                  0x00
-#define VIC_FIQ_STATUS                  0x04
+#include <linux/types.h>
+
 #define VIC_RAW_STATUS                  0x08
-#define VIC_INT_SELECT                  0x0c    /* 1 = FIQ, 0 = IRQ */
 #define VIC_INT_ENABLE                  0x10    /* 1 = enable, 0 = disable */
 #define VIC_INT_ENABLE_CLEAR            0x14
-#define VIC_INT_SOFT                    0x18
-#define VIC_INT_SOFT_CLEAR              0x1c
-#define VIC_PROTECT                     0x20
-#define VIC_PL190_VECT_ADDR             0x30    /* PL190 only */
-#define VIC_PL190_DEF_VECT_ADDR         0x34    /* PL190 only */
-
-#define VIC_VECT_ADDR0                  0x100   /* 0 to 15 (0..31 PL192) */
-#define VIC_VECT_CNTL0                  0x200   /* 0 to 15 (0..31 PL192) */
-#define VIC_ITCR                        0x300   /* VIC test control register */
-
-#define VIC_VECT_CNTL_ENABLE            (1 << 5)
-
-#define VIC_PL192_VECT_ADDR             0xF00
-
-#ifndef __ASSEMBLY__
-#include <linux/compiler.h>
-#include <linux/types.h>
 
 struct device_node;
 struct pt_regs;
@@ -50,8 +32,5 @@ struct pt_regs;
 void __vic_init(void __iomem *base, int irq_start, u32 vic_sources,
                 u32 resume_sources, struct device_node *node);
 void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
-int vic_of_init(struct device_node *node, struct device_node *parent);
-void vic_handle_irq(struct pt_regs *regs);
 
-#endif /* __ASSEMBLY__ */
 #endif
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index 6ee4247df11e..77a46ae2fc17 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -16,12 +16,6 @@
 /*
  * Registers
  */
-#define DB8500_PRCM_GPIOCR 0x138
-#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0     BIT(0)
-#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD      BIT(9)
-#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1     BIT(11)
-#define DB8500_PRCM_GPIOCR_SPI2_SELECT          BIT(23)
-
 #define DB8500_PRCM_LINE_VALUE 0x170
 #define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0      BIT(3)
 
@@ -493,20 +487,6 @@ struct prcmu_auto_pm_config {
         u8 sva_policy;
 };
 
-#define PRCMU_FW_PROJECT_U8500          2
-#define PRCMU_FW_PROJECT_U9500          4
-#define PRCMU_FW_PROJECT_U8500_C2       7
-#define PRCMU_FW_PROJECT_U9500_C2       11
-#define PRCMU_FW_PROJECT_U8520          13
-#define PRCMU_FW_PROJECT_U8420          14
-
-struct prcmu_fw_version {
-        u8 project;
-        u8 api_version;
-        u8 func_version;
-        u8 errata;
-};
-
 #ifdef CONFIG_MFD_DB8500_PRCMU
 
 void db8500_prcmu_early_init(void);
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index c202d6c4d879..f8bac7cfc25f 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -12,6 +12,10 @@
 #include <linux/notifier.h>
 #include <linux/err.h>
 
+/* Offset for the firmware version within the TCPM */
+#define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
+#define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
+
 /* PRCMU Wakeup defines */
 enum prcmu_wakeup_index {
         PRCMU_WAKEUP_INDEX_RTC,
@@ -214,12 +218,52 @@ enum ddr_pwrst {
         DDR_PWR_STATE_OFFHIGHLAT    = 0x03
 };
 
+#define DB8500_PRCMU_LEGACY_OFFSET              0xDD4
+
+struct prcmu_pdata
+{
+        bool enable_set_ddr_opp;
+        bool enable_ape_opp_100_voltage;
+        struct ab8500_platform_data *ab_platdata;
+        u32 version_offset;
+        u32 legacy_offset;
+        u32 adt_offset;
+};
+
+#define PRCMU_FW_PROJECT_U8500          2
+#define PRCMU_FW_PROJECT_U8400          3
+#define PRCMU_FW_PROJECT_U9500          4 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8500_MBB      5
+#define PRCMU_FW_PROJECT_U8500_C1       6
+#define PRCMU_FW_PROJECT_U8500_C2       7
+#define PRCMU_FW_PROJECT_U8500_C3       8
+#define PRCMU_FW_PROJECT_U8500_C4       9
+#define PRCMU_FW_PROJECT_U9500_MBL      10
+#define PRCMU_FW_PROJECT_U8500_MBL      11 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8500_MBL2     12 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8520          13
+#define PRCMU_FW_PROJECT_U8420          14
+#define PRCMU_FW_PROJECT_A9420          20
+/* [32..63] 9540 and derivatives */
+#define PRCMU_FW_PROJECT_U9540          32
+/* [64..95] 8540 and derivatives */
+#define PRCMU_FW_PROJECT_L8540          64
+/* [96..126] 8580 and derivatives */
+#define PRCMU_FW_PROJECT_L8580          96
+
+#define PRCMU_FW_PROJECT_NAME_LEN       20
+struct prcmu_fw_version {
+        u32 project; /* Notice, project shifted with 8 on ux540 */
+        u8 api_version;
+        u8 func_version;
+        u8 errata;
+        char project_name[PRCMU_FW_PROJECT_NAME_LEN];
+};
+
 #include <linux/mfd/db8500-prcmu.h>
 
 #if defined(CONFIG_UX500_SOC_DB8500)
 
-#include <mach/id.h>
-
 static inline void __init prcmu_early_init(void)
 {
         return db8500_prcmu_early_init();
@@ -626,85 +670,6 @@ static inline void prcmu_clear(unsigned int reg, u32 bits)
         prcmu_write_masked(reg, bits, 0);
 }
 
-#if defined(CONFIG_UX500_SOC_DB8500)
-
-/**
- * prcmu_enable_spi2 - Enables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_enable_spi2(void)
-{
-        if (cpu_is_u8500())
-                prcmu_set(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_disable_spi2 - Disables pin muxing for SPI2 on OtherAlternateC1.
- */
-static inline void prcmu_disable_spi2(void)
-{
-        if (cpu_is_u8500())
-                prcmu_clear(DB8500_PRCM_GPIOCR, DB8500_PRCM_GPIOCR_SPI2_SELECT);
-}
-
-/**
- * prcmu_enable_stm_mod_uart - Enables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_enable_stm_mod_uart(void)
-{
-        if (cpu_is_u8500()) {
-                prcmu_set(DB8500_PRCM_GPIOCR,
-                        (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-                         DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-        }
-}
-
-/**
- * prcmu_disable_stm_mod_uart - Disables pin muxing for STMMOD
- * and UARTMOD on OtherAlternateC3.
- */
-static inline void prcmu_disable_stm_mod_uart(void)
-{
-        if (cpu_is_u8500()) {
-                prcmu_clear(DB8500_PRCM_GPIOCR,
-                        (DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 |
-                         DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0));
-        }
-}
-
-/**
- * prcmu_enable_stm_ape - Enables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_enable_stm_ape(void)
-{
-        if (cpu_is_u8500()) {
-                prcmu_set(DB8500_PRCM_GPIOCR,
-                        DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-        }
-}
-
-/**
- * prcmu_disable_stm_ape - Disables pin muxing for STM APE on OtherAlternateC1.
- */
-static inline void prcmu_disable_stm_ape(void)
-{
-        if (cpu_is_u8500()) {
-                prcmu_clear(DB8500_PRCM_GPIOCR,
-                        DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD);
-        }
-}
-
-#else
-
-static inline void prcmu_enable_spi2(void) {}
-static inline void prcmu_disable_spi2(void) {}
-static inline void prcmu_enable_stm_mod_uart(void) {}
-static inline void prcmu_disable_stm_mod_uart(void) {}
-static inline void prcmu_enable_stm_ape(void) {}
-static inline void prcmu_disable_stm_ape(void) {}
-
-#endif
-
 /* PRCMU QoS APE OPP class */
 #define PRCMU_QOS_APE_OPP 1
 #define PRCMU_QOS_DDR_OPP 2
diff --git a/include/linux/sunxi_timer.h b/include/linux/sunxi_timer.h
index b9165bba6e61..18081787e5f3 100644
--- a/include/linux/sunxi_timer.h
+++ b/include/linux/sunxi_timer.h
@@ -19,6 +19,6 @@
 
 #include <asm/mach/time.h>
 
-extern struct sys_timer sunxi_timer;
+void sunxi_timer_init(void);
 
 #endif
diff --git a/include/linux/time.h b/include/linux/time.h
index a3ab6a814a9c..d4835dfdf25e 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -154,9 +154,7 @@ void timekeeping_inject_sleeptime(struct timespec *delta);
  * finer then tick granular time.
  */
 #ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
-extern u32 arch_gettimeoffset(void);
-#else
-static inline u32 arch_gettimeoffset(void) { return 0; }
+extern u32 (*arch_gettimeoffset)(void);
 #endif
 
 extern void do_gettimeofday(struct timeval *tv);
diff --git a/kernel/time/clockevents.c b/kernel/time/clockevents.c
index 30b6de0d977c..c6d6400ee137 100644
--- a/kernel/time/clockevents.c
+++ b/kernel/time/clockevents.c
@@ -339,6 +339,7 @@ void clockevents_config_and_register(struct clock_event_device *dev,
         clockevents_config(dev, freq);
         clockevents_register_device(dev);
 }
+EXPORT_SYMBOL_GPL(clockevents_config_and_register);
 
 /**
  * clockevents_update_freq - Update frequency and reprogram a clock event device.
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 1e35515a875e..9a0bc98fbe1d 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -138,6 +138,20 @@ static void tk_setup_internals(struct timekeeper *tk, struct clocksource *clock)
 }
 
 /* Timekeeper helper functions. */
+
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
+u32 (*arch_gettimeoffset)(void);
+
+u32 get_arch_timeoffset(void)
+{
+        if (likely(arch_gettimeoffset))
+                return arch_gettimeoffset();
+        return 0;
+}
+#else
+static inline u32 get_arch_timeoffset(void) { return 0; }
+#endif
+
 static inline s64 timekeeping_get_ns(struct timekeeper *tk)
 {
         cycle_t cycle_now, cycle_delta;
@@ -154,8 +168,8 @@ static inline s64 timekeeping_get_ns(struct timekeeper *tk)
         nsec = cycle_delta * tk->mult + tk->xtime_nsec;
         nsec >>= tk->shift;
 
-        /* If arch requires, add in gettimeoffset() */
-        return nsec + arch_gettimeoffset();
+        /* If arch requires, add in get_arch_timeoffset() */
+        return nsec + get_arch_timeoffset();
 }
 
 static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)
@@ -174,8 +188,8 @@ static inline s64 timekeeping_get_ns_raw(struct timekeeper *tk)
         /* convert delta to nanoseconds. */
         nsec = clocksource_cyc2ns(cycle_delta, clock->mult, clock->shift);
 
-        /* If arch requires, add in gettimeoffset() */
-        return nsec + arch_gettimeoffset();
+        /* If arch requires, add in get_arch_timeoffset() */
+        return nsec + get_arch_timeoffset();
 }
 
 static RAW_NOTIFIER_HEAD(pvclock_gtod_chain);
@@ -257,8 +271,8 @@ static void timekeeping_forward_now(struct timekeeper *tk)
 
         tk->xtime_nsec += cycle_delta * tk->mult;
 
-        /* If arch requires, add in gettimeoffset() */
-        tk->xtime_nsec += (u64)arch_gettimeoffset() << tk->shift;
+        /* If arch requires, add in get_arch_timeoffset() */
+        tk->xtime_nsec += (u64)get_arch_timeoffset() << tk->shift;
 
         tk_normalize_xtime(tk);
 
diff --git a/sound/soc/samsung/h1940_uda1380.c b/sound/soc/samsung/h1940_uda1380.c
index 3870e9678b5d..15a3817aa5c8 100644
--- a/sound/soc/samsung/h1940_uda1380.c
+++ b/sound/soc/samsung/h1940_uda1380.c
@@ -21,7 +21,6 @@
 #include <sound/jack.h>
 
 #include <plat/regs-iis.h>
-#include <mach/h1940-latch.h>
 #include <asm/mach-types.h>
 
 #include "s3c24xx-i2s.h"
@@ -147,9 +146,9 @@ static int h1940_spk_power(struct snd_soc_dapm_widget *w,
                                 struct snd_kcontrol *kcontrol, int event)
 {
         if (SND_SOC_DAPM_EVENT_ON(event))
-                gpio_set_value(H1940_LATCH_AUDIO_POWER, 1);
+                gpio_set_value(S3C_GPIO_END + 9, 1);
         else
-                gpio_set_value(H1940_LATCH_AUDIO_POWER, 0);
+                gpio_set_value(S3C_GPIO_END + 9, 0);
 
         return 0;
 }
@@ -233,11 +232,11 @@ static int __init h1940_init(void)
                 return -ENODEV;
 
         /* configure some gpios */
-        ret = gpio_request(H1940_LATCH_AUDIO_POWER, "speaker-power");
+        ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
         if (ret)
                 goto err_out;
 
-        ret = gpio_direction_output(H1940_LATCH_AUDIO_POWER, 0);
+        ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
         if (ret)
                 goto err_gpio;
 
@@ -258,7 +257,7 @@ static int __init h1940_init(void)
 err_plat:
         platform_device_put(s3c24xx_snd_device);
 err_gpio:
-        gpio_free(H1940_LATCH_AUDIO_POWER);
+        gpio_free(S3C_GPIO_END + 9);
 
 err_out:
         return ret;
@@ -269,7 +268,7 @@ static void __exit h1940_exit(void)
         platform_device_unregister(s3c24xx_snd_device);
         snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
                 hp_jack_gpios);
-        gpio_free(H1940_LATCH_AUDIO_POWER);
+        gpio_free(S3C_GPIO_END + 9);
 }
 
 module_init(h1940_init);
diff --git a/sound/soc/samsung/neo1973_wm8753.c b/sound/soc/samsung/neo1973_wm8753.c
index c7e965f80d2e..a301d8cfaa34 100644
--- a/sound/soc/samsung/neo1973_wm8753.c
+++ b/sound/soc/samsung/neo1973_wm8753.c
@@ -237,7 +237,7 @@ static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
 {
         gta02_speaker_enabled = ucontrol->value.integer.value[0];
 
-        gpio_set_value(GTA02_GPIO_HP_IN, !gta02_speaker_enabled);
+        gpio_set_value(S3C2410_GPJ(2), !gta02_speaker_enabled);
 
         return 0;
 }
@@ -252,7 +252,7 @@ static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
 static int lm4853_event(struct snd_soc_dapm_widget *w,
                         struct snd_kcontrol *k, int event)
 {
-        gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(event));
+        gpio_set_value(S3C2410_GPJ(1), SND_SOC_DAPM_EVENT_OFF(event));
 
         return 0;
 }
@@ -396,8 +396,8 @@ static struct snd_soc_codec_conf neo1973_codec_conf[] = {
 };
 
 static const struct gpio neo1973_gta02_gpios[] = {
-        { GTA02_GPIO_HP_IN, GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
-        { GTA02_GPIO_AMP_SHUT, GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
+        { S3C2410_GPJ(2), GPIOF_OUT_INIT_HIGH, "GTA02_HP_IN" },
+        { S3C2410_GPJ(1), GPIOF_OUT_INIT_HIGH, "GTA02_AMP_SHUT" },
 };
 
 static struct snd_soc_card neo1973 = {