Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd

Pull MTD changes from Brian Norris:
 - Unify some compile-time differences so that we have fewer uses of
   #ifdef CONFIG_OF in atmel_nand
 - Other general cleanups (removing unused functions, options,
   variables, fields; use correct interfaces)
 - Fix BUG() for new odd-sized NAND, which report non-power-of-2
   dimensions via ONFI
 - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.)
 - Improve differentiation between SLC and MLC NAND -- this clarifies an
   ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO
   ioctl), where the MTD_MLCNANDFLASH type was present but
   inconsistently used
 - Extend GPMI NAND to support multi-chip-select NAND for some platforms
 - Many improvements to the OMAP2/3 NAND driver, including an expanded
   DT binding to bring us closer to mainline support for some OMAP
   systems
 - Fix a deadlock in the error path of the Atmel NAND driver probe
 - Correct the error codes from MTD mmap() to conform to POSIX and the
   Linux Programmer's Manual.  This is an acknowledged change in the MTD
   ABI, but I can't imagine somebody relying on the non-standard -ENOSYS
   error code specifically.  Am I just being unimaginative? :)
 - Fix a few important GPMI NAND bugs (one regression from 3.12 and one
   long-standing race condition)
 - More? Read the log!

* tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits)
  mtd: gpmi: fix the NULL pointer
  mtd: gpmi: fix kernel BUG due to racing DMA operations
  mtd: mtdchar: return expected errors on mmap() call
  mtd: gpmi: only scan two chips for imx6
  mtd: gpmi: Use devm_kzalloc()
  mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected
  mtd: nand: use a local variable to simplify the nand_scan_tail
  mtd: nand: remove deprecated IRQF_DISABLED
  mtd: dataflash: Say if we find a device we don't support
  mtd: nand: omap: fix error return code in omap_nand_probe()
  mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES
  mtd: m25p80: fixup device removal failure path
  mtd: mxc_nand: Include linux/of.h header
  mtd: remove duplicated include from mtdcore.c
  mtd: m25p80: add support for Macronix mx25l3255e
  mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig
  mtd: nand: omap: updated devm_xx for all resource allocation and free calls
  mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c
  mtd: nand: omap: clean-up ecc layout for BCH ecc schemes
  mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe
  ...

65 files changed, 925 insertions, 984 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd
index bfd119ace6ad..1399bb2da3eb 100644
--- a/Documentation/ABI/testing/sysfs-class-mtd
+++ b/Documentation/ABI/testing/sysfs-class-mtd
@@ -104,7 +104,7 @@ Description:
                 One of the following ASCII strings, representing the device
                 type:
 
-                absent, ram, rom, nor, nand, dataflash, ubi, unknown
+                absent, ram, rom, nor, nand, mlc-nand, dataflash, ubi, unknown
 
 What:           /sys/class/mtd/mtdX/writesize
 Date:           April 2009
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index a248f42a121e..cd11926e07c7 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -1222,8 +1222,6 @@ in this page</entry>
 #define NAND_BBT_VERSION        0x00000100
 /* Create a bbt if none axists */
 #define NAND_BBT_CREATE         0x00000200
-/* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES   0x00000400
 /* Write bbt if neccecary */
 #define NAND_BBT_WRITE          0x00001000
 /* Read and write back block contents when writing bbt */
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index df338cb5059c..5e1f31b5ff70 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -22,10 +22,10 @@ Optional properties:
                                 width of 8 is assumed.
 
  - ti,nand-ecc-opt:             A string setting the ECC layout to use. One of:
-
-                "sw"            Software method (default)
-                "hw"            Hardware method
-                "hw-romcode"    gpmc hamming mode method & romcode layout
+                "sw"            <deprecated> use "ham1" instead
+                "hw"            <deprecated> use "ham1" instead
+                "hw-romcode"    <deprecated> use "ham1" instead
+                "ham1"          1-bit Hamming ecc code
                 "bch4"          4-bit BCH ecc code
                 "bch8"          8-bit BCH ecc code
 
@@ -36,8 +36,12 @@ Optional properties:
                 "prefetch-dma"          Prefetch enabled sDMA mode
                 "prefetch-irq"          Prefetch enabled irq mode
 
- - elm_id:      Specifies elm device node. This is required to support BCH
-                error correction using ELM module.
+ - elm_id:      <deprecated> use "ti,elm-id" instead
+ - ti,elm-id:   Specifies phandle of the ELM devicetree node.
+                ELM is an on-chip hardware engine on TI SoC which is used for
+                locating ECC errors for BCHx algorithms. SoC devices which have
+                ELM hardware engines should specify this device node in .dtsi
+                Using ELM for ECC error correction frees some CPU cycles.
 
 For inline partiton table parsing (optional):
 
diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c
index fc20a61f6b2a..ac82512b9c8c 100644
--- a/arch/arm/mach-omap2/board-flash.c
+++ b/arch/arm/mach-omap2/board-flash.c
@@ -142,7 +142,7 @@ __init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
         board_nand_data.nr_parts        = nr_parts;
         board_nand_data.devsize         = nand_type;