diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2010-03-01 16:04:58 -0500 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-03-01 16:04:58 -0500 |
commit | 379e3a820da171cb1d97e8dccd736a69cebfb7c0 (patch) | |
tree | aef459cf9b4de9b85d357f487bb3e1170c9eea98 | |
parent | 8724fdb53d27d7b59b60c8a399cc67f9abfabb33 (diff) | |
parent | a55ab496ea9c820b7192c15ef1fbf3291edfe638 (diff) |
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (38 commits)
sata_via: Delay on vt6420 when starting ATAPI DMA write
ata: Detect Delkin Devices compact flash
pata_efar: Enable parallel scanning
pata_atiixp: enable parallel scan
[libata] pata_atiixp: add locking for parallel scanning
[libata] pata_efar: add locking for parallel scanning
libata: Pass host flags into the pci helper
[libata] pata_marvell: CONFIG_AHCI is really CONFIG_SATA_AHCI
libata: Allow pata_legacy to be built on non-ISA but PCI systems
pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards
[libata] pata_at91: fix backslash-continued string
pata_via: store UDMA masks in via_isa_bridges table
pata_via: fix address setup timings underlocking
pata_serverworks: fix error message
pata_serverworks: fix PIO setup for the second channel
pata_efar: fix secondary port support
pata_cypress: fix PIO timings underclocking
pata_cs5535: use correct values for PIO1 and PIO2 data timings
pata_cmd64x: remove unused definitions
...
48 files changed, 663 insertions, 417 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 56c6374a3989..01c52c415bdc 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig | |||
@@ -446,9 +446,9 @@ config PATA_JMICRON | |||
446 | 446 | ||
447 | config PATA_LEGACY | 447 | config PATA_LEGACY |
448 | tristate "Legacy ISA PATA support (Experimental)" | 448 | tristate "Legacy ISA PATA support (Experimental)" |
449 | depends on ISA && EXPERIMENTAL | 449 | depends on (ISA || PCI) && EXPERIMENTAL |
450 | help | 450 | help |
451 | This option enables support for ISA/VLB bus legacy PATA | 451 | This option enables support for ISA/VLB/PCI bus legacy PATA |
452 | ports and allows them to be accessed via the new ATA layer. | 452 | ports and allows them to be accessed via the new ATA layer. |
453 | 453 | ||
454 | If unsure, say N. | 454 | If unsure, say N. |
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index a6a736a7dbf2..6bd930b93bcc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c | |||
@@ -93,6 +93,9 @@ enum { | |||
93 | AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, | 93 | AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS, |
94 | AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + | 94 | AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + |
95 | AHCI_RX_FIS_SZ, | 95 | AHCI_RX_FIS_SZ, |
96 | AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ + | ||
97 | AHCI_CMD_TBL_AR_SZ + | ||
98 | (AHCI_RX_FIS_SZ * 16), | ||
96 | AHCI_IRQ_ON_SG = (1 << 31), | 99 | AHCI_IRQ_ON_SG = (1 << 31), |
97 | AHCI_CMD_ATAPI = (1 << 5), | 100 | AHCI_CMD_ATAPI = (1 << 5), |
98 | AHCI_CMD_WRITE = (1 << 6), | 101 | AHCI_CMD_WRITE = (1 << 6), |
@@ -170,6 +173,7 @@ enum { | |||
170 | PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ | 173 | PORT_SCR_ERR = 0x30, /* SATA phy register: SError */ |
171 | PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ | 174 | PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */ |
172 | PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ | 175 | PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */ |
176 | PORT_FBS = 0x40, /* FIS-based Switching */ | ||
173 | 177 | ||
174 | /* PORT_IRQ_{STAT,MASK} bits */ | 178 | /* PORT_IRQ_{STAT,MASK} bits */ |
175 | PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ | 179 | PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ |
@@ -208,6 +212,7 @@ enum { | |||
208 | PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ | 212 | PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ |
209 | PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ | 213 | PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ |
210 | PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ | 214 | PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ |
215 | PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ | ||
211 | PORT_CMD_PMP = (1 << 17), /* PMP attached */ | 216 | PORT_CMD_PMP = (1 << 17), /* PMP attached */ |
212 | PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ | 217 | PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ |
213 | PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ | 218 | PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ |
@@ -222,6 +227,14 @@ enum { | |||
222 | PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ | 227 | PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ |
223 | PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ | 228 | PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ |
224 | 229 | ||
230 | PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ | ||
231 | PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ | ||
232 | PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ | ||
233 | PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */ | ||
234 | PORT_FBS_SDE = (1 << 2), /* FBS single device error */ | ||
235 | PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ | ||
236 | PORT_FBS_EN = (1 << 0), /* Enable FBS */ | ||
237 | |||
225 | /* hpriv->flags bits */ | 238 | /* hpriv->flags bits */ |
226 | AHCI_HFLAG_NO_NCQ = (1 << 0), | 239 | AHCI_HFLAG_NO_NCQ = (1 << 0), |
227 | AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ | 240 | AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ |
@@ -304,6 +317,9 @@ struct ahci_port_priv { | |||
304 | unsigned int ncq_saw_dmas:1; | 317 | unsigned int ncq_saw_dmas:1; |
305 | unsigned int ncq_saw_sdb:1; | 318 | unsigned int ncq_saw_sdb:1; |
306 | u32 intr_mask; /* interrupts to enable */ | 319 | u32 intr_mask; /* interrupts to enable */ |
320 | bool fbs_supported; /* set iff FBS is supported */ | ||
321 | bool fbs_enabled; /* set iff FBS is enabled */ | ||
322 | int fbs_last_dev; /* save FBS.DEV of last FIS */ | ||
307 | /* enclosure management info per PM slot */ | 323 | /* enclosure management info per PM slot */ |
308 | struct ahci_em_priv em_priv[EM_MAX_SLOTS]; | 324 | struct ahci_em_priv em_priv[EM_MAX_SLOTS]; |
309 | }; | 325 | }; |
@@ -315,9 +331,12 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc); | |||
315 | static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); | 331 | static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc); |
316 | static int ahci_port_start(struct ata_port *ap); | 332 | static int ahci_port_start(struct ata_port *ap); |
317 | static void ahci_port_stop(struct ata_port *ap); | 333 | static void ahci_port_stop(struct ata_port *ap); |
334 | static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc); | ||
318 | static void ahci_qc_prep(struct ata_queued_cmd *qc); | 335 | static void ahci_qc_prep(struct ata_queued_cmd *qc); |
319 | static void ahci_freeze(struct ata_port *ap); | 336 | static void ahci_freeze(struct ata_port *ap); |
320 | static void ahci_thaw(struct ata_port *ap); | 337 | static void ahci_thaw(struct ata_port *ap); |
338 | static void ahci_enable_fbs(struct ata_port *ap); | ||
339 | static void ahci_disable_fbs(struct ata_port *ap); | ||
321 | static void ahci_pmp_attach(struct ata_port *ap); | 340 | static void ahci_pmp_attach(struct ata_port *ap); |
322 | static void ahci_pmp_detach(struct ata_port *ap); | 341 | static void ahci_pmp_detach(struct ata_port *ap); |
323 | static int ahci_softreset(struct ata_link *link, unsigned int *class, | 342 | static int ahci_softreset(struct ata_link *link, unsigned int *class, |
@@ -356,10 +375,10 @@ static ssize_t ahci_show_host_version(struct device *dev, | |||
356 | static ssize_t ahci_show_port_cmd(struct device *dev, | 375 | static ssize_t ahci_show_port_cmd(struct device *dev, |
357 | struct device_attribute *attr, char *buf); | 376 | struct device_attribute *attr, char *buf); |
358 | 377 | ||
359 | DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); | 378 | static DEVICE_ATTR(ahci_host_caps, S_IRUGO, ahci_show_host_caps, NULL); |
360 | DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); | 379 | static DEVICE_ATTR(ahci_host_cap2, S_IRUGO, ahci_show_host_cap2, NULL); |
361 | DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); | 380 | static DEVICE_ATTR(ahci_host_version, S_IRUGO, ahci_show_host_version, NULL); |
362 | DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); | 381 | static DEVICE_ATTR(ahci_port_cmd, S_IRUGO, ahci_show_port_cmd, NULL); |
363 | 382 | ||
364 | static struct device_attribute *ahci_shost_attrs[] = { | 383 | static struct device_attribute *ahci_shost_attrs[] = { |
365 | &dev_attr_link_power_management_policy, | 384 | &dev_attr_link_power_management_policy, |
@@ -390,7 +409,7 @@ static struct scsi_host_template ahci_sht = { | |||
390 | static struct ata_port_operations ahci_ops = { | 409 | static struct ata_port_operations ahci_ops = { |
391 | .inherits = &sata_pmp_port_ops, | 410 | .inherits = &sata_pmp_port_ops, |
392 | 411 | ||
393 | .qc_defer = sata_pmp_qc_defer_cmd_switch, | 412 | .qc_defer = ahci_pmp_qc_defer, |
394 | .qc_prep = ahci_qc_prep, | 413 | .qc_prep = ahci_qc_prep, |
395 | .qc_issue = ahci_qc_issue, | 414 | .qc_issue = ahci_qc_issue, |
396 | .qc_fill_rtf = ahci_qc_fill_rtf, | 415 | .qc_fill_rtf = ahci_qc_fill_rtf, |
@@ -570,6 +589,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { | |||
570 | { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ | 589 | { PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */ |
571 | { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ | 590 | { PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */ |
572 | { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ | 591 | { PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */ |
592 | { PCI_VDEVICE(INTEL, 0x1c02), board_ahci }, /* CPT AHCI */ | ||
593 | { PCI_VDEVICE(INTEL, 0x1c03), board_ahci }, /* CPT AHCI */ | ||
594 | { PCI_VDEVICE(INTEL, 0x1c04), board_ahci }, /* CPT RAID */ | ||
595 | { PCI_VDEVICE(INTEL, 0x1c05), board_ahci }, /* CPT RAID */ | ||
596 | { PCI_VDEVICE(INTEL, 0x1c06), board_ahci }, /* CPT RAID */ | ||
597 | { PCI_VDEVICE(INTEL, 0x1c07), board_ahci }, /* CPT RAID */ | ||
573 | 598 | ||
574 | /* JMicron 360/1/3/5/6, match class to avoid IDE function */ | 599 | /* JMicron 360/1/3/5/6, match class to avoid IDE function */ |
575 | { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, | 600 | { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, |
@@ -2045,6 +2070,17 @@ static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl) | |||
2045 | return si; | 2070 | return si; |
2046 | } | 2071 | } |
2047 | 2072 | ||
2073 | static int ahci_pmp_qc_defer(struct ata_queued_cmd *qc) | ||
2074 | { | ||
2075 | struct ata_port *ap = qc->ap; | ||
2076 | struct ahci_port_priv *pp = ap->private_data; | ||
2077 | |||
2078 | if (!sata_pmp_attached(ap) || pp->fbs_enabled) | ||
2079 | return ata_std_qc_defer(qc); | ||
2080 | else | ||
2081 | return sata_pmp_qc_defer_cmd_switch(qc); | ||
2082 | } | ||
2083 | |||
2048 | static void ahci_qc_prep(struct ata_queued_cmd *qc) | 2084 | static void ahci_qc_prep(struct ata_queued_cmd *qc) |
2049 | { | 2085 | { |
2050 | struct ata_port *ap = qc->ap; | 2086 | struct ata_port *ap = qc->ap; |
@@ -2083,6 +2119,31 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc) | |||
2083 | ahci_fill_cmd_slot(pp, qc->tag, opts); | 2119 | ahci_fill_cmd_slot(pp, qc->tag, opts); |
2084 | } | 2120 | } |
2085 | 2121 | ||
2122 | static void ahci_fbs_dec_intr(struct ata_port *ap) | ||
2123 | { | ||
2124 | struct ahci_port_priv *pp = ap->private_data; | ||
2125 | void __iomem *port_mmio = ahci_port_base(ap); | ||
2126 | u32 fbs = readl(port_mmio + PORT_FBS); | ||
2127 | int retries = 3; | ||
2128 | |||
2129 | DPRINTK("ENTER\n"); | ||
2130 | BUG_ON(!pp->fbs_enabled); | ||
2131 | |||
2132 | /* time to wait for DEC is not specified by AHCI spec, | ||
2133 | * add a retry loop for safety. | ||
2134 | */ | ||
2135 | writel(fbs | PORT_FBS_DEC, port_mmio + PORT_FBS); | ||
2136 | fbs = readl(port_mmio + PORT_FBS); | ||
2137 | while ((fbs & PORT_FBS_DEC) && retries--) { | ||
2138 | udelay(1); | ||
2139 | fbs = readl(port_mmio + PORT_FBS); | ||
2140 | } | ||
2141 | |||
2142 | if (fbs & PORT_FBS_DEC) | ||
2143 | dev_printk(KERN_ERR, ap->host->dev, | ||
2144 | "failed to clear device error\n"); | ||
2145 | } | ||
2146 | |||
2086 | static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) | 2147 | static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) |
2087 | { | 2148 | { |
2088 | struct ahci_host_priv *hpriv = ap->host->private_data; | 2149 | struct ahci_host_priv *hpriv = ap->host->private_data; |
@@ -2091,12 +2152,26 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) | |||
2091 | struct ata_link *link = NULL; | 2152 | struct ata_link *link = NULL; |
2092 | struct ata_queued_cmd *active_qc; | 2153 | struct ata_queued_cmd *active_qc; |
2093 | struct ata_eh_info *active_ehi; | 2154 | struct ata_eh_info *active_ehi; |
2155 | bool fbs_need_dec = false; | ||
2094 | u32 serror; | 2156 | u32 serror; |
2095 | 2157 | ||
2096 | /* determine active link */ | 2158 | /* determine active link with error */ |
2097 | ata_for_each_link(link, ap, EDGE) | 2159 | if (pp->fbs_enabled) { |
2098 | if (ata_link_active(link)) | 2160 | void __iomem *port_mmio = ahci_port_base(ap); |
2099 | break; | 2161 | u32 fbs = readl(port_mmio + PORT_FBS); |
2162 | int pmp = fbs >> PORT_FBS_DWE_OFFSET; | ||
2163 | |||
2164 | if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) && | ||
2165 | ata_link_online(&ap->pmp_link[pmp])) { | ||
2166 | link = &ap->pmp_link[pmp]; | ||
2167 | fbs_need_dec = true; | ||
2168 | } | ||
2169 | |||
2170 | } else | ||
2171 | ata_for_each_link(link, ap, EDGE) | ||
2172 | if (ata_link_active(link)) | ||
2173 | break; | ||
2174 | |||
2100 | if (!link) | 2175 | if (!link) |
2101 | link = &ap->link; | 2176 | link = &ap->link; |
2102 | 2177 | ||
@@ -2153,8 +2228,13 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) | |||
2153 | } | 2228 | } |
2154 | 2229 | ||
2155 | if (irq_stat & PORT_IRQ_IF_ERR) { | 2230 | if (irq_stat & PORT_IRQ_IF_ERR) { |
2156 | host_ehi->err_mask |= AC_ERR_ATA_BUS; | 2231 | if (fbs_need_dec) |
2157 | host_ehi->action |= ATA_EH_RESET; | 2232 | active_ehi->err_mask |= AC_ERR_DEV; |
2233 | else { | ||
2234 | host_ehi->err_mask |= AC_ERR_ATA_BUS; | ||
2235 | host_ehi->action |= ATA_EH_RESET; | ||
2236 | } | ||
2237 | |||
2158 | ata_ehi_push_desc(host_ehi, "interface fatal error"); | 2238 | ata_ehi_push_desc(host_ehi, "interface fatal error"); |
2159 | } | 2239 | } |
2160 | 2240 | ||
@@ -2169,7 +2249,10 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) | |||
2169 | 2249 | ||
2170 | if (irq_stat & PORT_IRQ_FREEZE) | 2250 | if (irq_stat & PORT_IRQ_FREEZE) |
2171 | ata_port_freeze(ap); | 2251 | ata_port_freeze(ap); |
2172 | else | 2252 | else if (fbs_need_dec) { |
2253 | ata_link_abort(link); | ||
2254 | ahci_fbs_dec_intr(ap); | ||
2255 | } else | ||
2173 | ata_port_abort(ap); | 2256 | ata_port_abort(ap); |
2174 | } | 2257 | } |
2175 | 2258 | ||
@@ -2222,12 +2305,19 @@ static void ahci_port_intr(struct ata_port *ap) | |||
2222 | /* If the 'N' bit in word 0 of the FIS is set, | 2305 | /* If the 'N' bit in word 0 of the FIS is set, |
2223 | * we just received asynchronous notification. | 2306 | * we just received asynchronous notification. |
2224 | * Tell libata about it. | 2307 | * Tell libata about it. |
2308 | * | ||
2309 | * Lack of SNotification should not appear in | ||
2310 | * ahci 1.2, so the workaround is unnecessary | ||
2311 | * when FBS is enabled. | ||
2225 | */ | 2312 | */ |
2226 | const __le32 *f = pp->rx_fis + RX_FIS_SDB; | 2313 | if (pp->fbs_enabled) |
2227 | u32 f0 = le32_to_cpu(f[0]); | 2314 | WARN_ON_ONCE(1); |
2228 | 2315 | else { | |
2229 | if (f0 & (1 << 15)) | 2316 | const __le32 *f = pp->rx_fis + RX_FIS_SDB; |
2230 | sata_async_notification(ap); | 2317 | u32 f0 = le32_to_cpu(f[0]); |
2318 | if (f0 & (1 << 15)) | ||
2319 | sata_async_notification(ap); | ||
2320 | } | ||
2231 | } | 2321 | } |
2232 | } | 2322 | } |
2233 | 2323 | ||
@@ -2321,6 +2411,15 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc) | |||
2321 | 2411 | ||
2322 | if (qc->tf.protocol == ATA_PROT_NCQ) | 2412 | if (qc->tf.protocol == ATA_PROT_NCQ) |
2323 | writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); | 2413 | writel(1 << qc->tag, port_mmio + PORT_SCR_ACT); |
2414 | |||
2415 | if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) { | ||
2416 | u32 fbs = readl(port_mmio + PORT_FBS); | ||
2417 | fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC); | ||
2418 | fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET; | ||
2419 | writel(fbs, port_mmio + PORT_FBS); | ||
2420 | pp->fbs_last_dev = qc->dev->link->pmp; | ||
2421 | } | ||
2422 | |||
2324 | writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); | 2423 | writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE); |
2325 | 2424 | ||
2326 | ahci_sw_activity(qc->dev->link); | 2425 | ahci_sw_activity(qc->dev->link); |
@@ -2333,6 +2432,9 @@ static bool ahci_qc_fill_rtf(struct ata_queued_cmd *qc) | |||
2333 | struct ahci_port_priv *pp = qc->ap->private_data; | 2432 | struct ahci_port_priv *pp = qc->ap->private_data; |
2334 | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; | 2433 | u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; |
2335 | 2434 | ||
2435 | if (pp->fbs_enabled) | ||
2436 | d2h_fis += qc->dev->link->pmp * AHCI_RX_FIS_SZ; | ||
2437 | |||
2336 | ata_tf_from_fis(d2h_fis, &qc->result_tf); | 2438 | ata_tf_from_fis(d2h_fis, &qc->result_tf); |
2337 | return true; | 2439 | return true; |
2338 | } | 2440 | } |
@@ -2381,6 +2483,71 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc) | |||
2381 | ahci_kick_engine(ap); | 2483 | ahci_kick_engine(ap); |
2382 | } | 2484 | } |
2383 | 2485 | ||
2486 | static void ahci_enable_fbs(struct ata_port *ap) | ||
2487 | { | ||
2488 | struct ahci_port_priv *pp = ap->private_data; | ||
2489 | void __iomem *port_mmio = ahci_port_base(ap); | ||
2490 | u32 fbs; | ||
2491 | int rc; | ||
2492 | |||
2493 | if (!pp->fbs_supported) | ||
2494 | return; | ||
2495 | |||
2496 | fbs = readl(port_mmio + PORT_FBS); | ||
2497 | if (fbs & PORT_FBS_EN) { | ||
2498 | pp->fbs_enabled = true; | ||
2499 | pp->fbs_last_dev = -1; /* initialization */ | ||
2500 | return; | ||
2501 | } | ||
2502 | |||
2503 | rc = ahci_stop_engine(ap); | ||
2504 | if (rc) | ||
2505 | return; | ||
2506 | |||
2507 | writel(fbs | PORT_FBS_EN, port_mmio + PORT_FBS); | ||
2508 | fbs = readl(port_mmio + PORT_FBS); | ||
2509 | if (fbs & PORT_FBS_EN) { | ||
2510 | dev_printk(KERN_INFO, ap->host->dev, "FBS is enabled.\n"); | ||
2511 | pp->fbs_enabled = true; | ||
2512 | pp->fbs_last_dev = -1; /* initialization */ | ||
2513 | } else | ||
2514 | dev_printk(KERN_ERR, ap->host->dev, "Failed to enable FBS\n"); | ||
2515 | |||
2516 | ahci_start_engine(ap); | ||
2517 | } | ||
2518 | |||
2519 | static void ahci_disable_fbs(struct ata_port *ap) | ||
2520 | { | ||
2521 | struct ahci_port_priv *pp = ap->private_data; | ||
2522 | void __iomem *port_mmio = ahci_port_base(ap); | ||
2523 | u32 fbs; | ||
2524 | int rc; | ||
2525 | |||
2526 | if (!pp->fbs_supported) | ||
2527 | return; | ||
2528 | |||
2529 | fbs = readl(port_mmio + PORT_FBS); | ||
2530 | if ((fbs & PORT_FBS_EN) == 0) { | ||
2531 | pp->fbs_enabled = false; | ||
2532 | return; | ||
2533 | } | ||
2534 | |||
2535 | rc = ahci_stop_engine(ap); | ||
2536 | if (rc) | ||
2537 | return; | ||
2538 | |||
2539 | writel(fbs & ~PORT_FBS_EN, port_mmio + PORT_FBS); | ||
2540 | fbs = readl(port_mmio + PORT_FBS); | ||
2541 | if (fbs & PORT_FBS_EN) | ||
2542 | dev_printk(KERN_ERR, ap->host->dev, "Failed to disable FBS\n"); | ||
2543 | else { | ||
2544 | dev_printk(KERN_INFO, ap->host->dev, "FBS is disabled.\n"); | ||
2545 | pp->fbs_enabled = false; | ||
2546 | } | ||
2547 | |||
2548 | ahci_start_engine(ap); | ||
2549 | } | ||
2550 | |||
2384 | static void ahci_pmp_attach(struct ata_port *ap) | 2551 | static void ahci_pmp_attach(struct ata_port *ap) |
2385 | { | 2552 | { |
2386 | void __iomem *port_mmio = ahci_port_base(ap); | 2553 | void __iomem *port_mmio = ahci_port_base(ap); |
@@ -2391,6 +2558,8 @@ static void ahci_pmp_attach(struct ata_port *ap) | |||
2391 | cmd |= PORT_CMD_PMP; | 2558 | cmd |= PORT_CMD_PMP; |
2392 | writel(cmd, port_mmio + PORT_CMD); | 2559 | writel(cmd, port_mmio + PORT_CMD); |
2393 | 2560 | ||
2561 | ahci_enable_fbs(ap); | ||
2562 | |||
2394 | pp->intr_mask |= PORT_IRQ_BAD_PMP; | 2563 | pp->intr_mask |= PORT_IRQ_BAD_PMP; |
2395 | writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); | 2564 | writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK); |
2396 | } | 2565 | } |
@@ -2401,6 +2570,8 @@ static void ahci_pmp_detach(struct ata_port *ap) | |||
2401 | struct ahci_port_priv *pp = ap->private_data; | 2570 | struct ahci_port_priv *pp = ap->private_data; |
2402 | u32 cmd; | 2571 | u32 cmd; |
2403 | 2572 | ||
2573 | ahci_disable_fbs(ap); | ||
2574 | |||
2404 | cmd = readl(port_mmio + PORT_CMD); | 2575 | cmd = readl(port_mmio + PORT_CMD); |
2405 | cmd &= ~PORT_CMD_PMP; | 2576 | cmd &= ~PORT_CMD_PMP; |
2406 | writel(cmd, port_mmio + PORT_CMD); | 2577 | writel(cmd, port_mmio + PORT_CMD); |
@@ -2492,20 +2663,40 @@ static int ahci_pci_device_resume(struct pci_dev *pdev) | |||
2492 | 2663 | ||
2493 | static int ahci_port_start(struct ata_port *ap) | 2664 | static int ahci_port_start(struct ata_port *ap) |
2494 | { | 2665 | { |
2666 | struct ahci_host_priv *hpriv = ap->host->private_data; | ||
2495 | struct device *dev = ap->host->dev; | 2667 | struct device *dev = ap->host->dev; |
2496 | struct ahci_port_priv *pp; | 2668 | struct ahci_port_priv *pp; |
2497 | void *mem; | 2669 | void *mem; |
2498 | dma_addr_t mem_dma; | 2670 | dma_addr_t mem_dma; |
2671 | size_t dma_sz, rx_fis_sz; | ||
2499 | 2672 | ||
2500 | pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); | 2673 | pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL); |
2501 | if (!pp) | 2674 | if (!pp) |
2502 | return -ENOMEM; | 2675 | return -ENOMEM; |
2503 | 2676 | ||
2504 | mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma, | 2677 | /* check FBS capability */ |
2505 | GFP_KERNEL); | 2678 | if ((hpriv->cap & HOST_CAP_FBS) && sata_pmp_supported(ap)) { |
2679 | void __iomem *port_mmio = ahci_port_base(ap); | ||
2680 | u32 cmd = readl(port_mmio + PORT_CMD); | ||
2681 | if (cmd & PORT_CMD_FBSCP) | ||
2682 | pp->fbs_supported = true; | ||
2683 | else | ||
2684 | dev_printk(KERN_WARNING, dev, | ||
2685 | "The port is not capable of FBS\n"); | ||
2686 | } | ||
2687 | |||
2688 | if (pp->fbs_supported) { | ||
2689 | dma_sz = AHCI_PORT_PRIV_FBS_DMA_SZ; | ||
2690 | rx_fis_sz = AHCI_RX_FIS_SZ * 16; | ||
2691 | } else { | ||
2692 | dma_sz = AHCI_PORT_PRIV_DMA_SZ; | ||
2693 | rx_fis_sz = AHCI_RX_FIS_SZ; | ||
2694 | } | ||
2695 | |||
2696 | mem = dmam_alloc_coherent(dev, dma_sz, &mem_dma, GFP_KERNEL); | ||
2506 | if (!mem) | 2697 | if (!mem) |
2507 | return -ENOMEM; | 2698 | return -ENOMEM; |
2508 | memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ); | 2699 | memset(mem, 0, dma_sz); |
2509 | 2700 | ||
2510 | /* | 2701 | /* |
2511 | * First item in chunk of DMA memory: 32-slot command table, | 2702 | * First item in chunk of DMA memory: 32-slot command table, |
@@ -2523,8 +2714,8 @@ static int ahci_port_start(struct ata_port *ap) | |||
2523 | pp->rx_fis = mem; | 2714 | pp->rx_fis = mem; |
2524 | pp->rx_fis_dma = mem_dma; | 2715 | pp->rx_fis_dma = mem_dma; |
2525 | 2716 | ||
2526 | mem += AHCI_RX_FIS_SZ; | 2717 | mem += rx_fis_sz; |
2527 | mem_dma += AHCI_RX_FIS_SZ; | 2718 | mem_dma += rx_fis_sz; |
2528 | 2719 | ||
2529 | /* | 2720 | /* |
2530 | * Third item: data area for storing a single command | 2721 | * Third item: data area for storing a single command |
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 12e26c3c68e3..33fb614f9784 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c | |||
@@ -155,7 +155,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id | |||
155 | return rc; | 155 | return rc; |
156 | pcim_pin_device(dev); | 156 | pcim_pin_device(dev); |
157 | } | 157 | } |
158 | return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL); | 158 | return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0); |
159 | } | 159 | } |
160 | 160 | ||
161 | static struct pci_device_id ata_generic[] = { | 161 | static struct pci_device_id ata_generic[] = { |
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 6f3f2257d0f0..c33806654e46 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c | |||
@@ -173,6 +173,7 @@ static int piix_sidpr_scr_read(struct ata_link *link, | |||
173 | unsigned int reg, u32 *val); | 173 | unsigned int reg, u32 *val); |
174 | static int piix_sidpr_scr_write(struct ata_link *link, | 174 | static int piix_sidpr_scr_write(struct ata_link *link, |
175 | unsigned int reg, u32 val); | 175 | unsigned int reg, u32 val); |
176 | static bool piix_irq_check(struct ata_port *ap); | ||
176 | #ifdef CONFIG_PM | 177 | #ifdef CONFIG_PM |
177 | static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); | 178 | static int piix_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg); |
178 | static int piix_pci_device_resume(struct pci_dev *pdev); | 179 | static int piix_pci_device_resume(struct pci_dev *pdev); |
@@ -291,6 +292,14 @@ static const struct pci_device_id piix_pci_tbl[] = { | |||
291 | { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, | 292 | { 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, |
292 | /* SATA Controller IDE (PCH) */ | 293 | /* SATA Controller IDE (PCH) */ |
293 | { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, | 294 | { 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, |
295 | /* SATA Controller IDE (CPT) */ | ||
296 | { 0x8086, 0x1c00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, | ||
297 | /* SATA Controller IDE (CPT) */ | ||
298 | { 0x8086, 0x1c01, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, | ||
299 | /* SATA Controller IDE (CPT) */ | ||
300 | { 0x8086, 0x1c08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, | ||
301 | /* SATA Controller IDE (CPT) */ | ||
302 | { 0x8086, 0x1c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, | ||
294 | { } /* terminate list */ | 303 | { } /* terminate list */ |
295 | }; | 304 | }; |
296 | 305 | ||
@@ -309,8 +318,13 @@ static struct scsi_host_template piix_sht = { | |||
309 | ATA_BMDMA_SHT(DRV_NAME), | 318 | ATA_BMDMA_SHT(DRV_NAME), |
310 | }; | 319 | }; |
311 | 320 | ||
312 | static struct ata_port_operations piix_pata_ops = { | 321 | static struct ata_port_operations piix_sata_ops = { |
313 | .inherits = &ata_bmdma32_port_ops, | 322 | .inherits = &ata_bmdma32_port_ops, |
323 | .sff_irq_check = piix_irq_check, | ||
324 | }; | ||
325 | |||
326 | static struct ata_port_operations piix_pata_ops = { | ||
327 | .inherits = &piix_sata_ops, | ||
314 | .cable_detect = ata_cable_40wire, | 328 | .cable_detect = ata_cable_40wire, |
315 | .set_piomode = piix_set_piomode, | 329 | .set_piomode = piix_set_piomode, |
316 | .set_dmamode = piix_set_dmamode, | 330 | .set_dmamode = piix_set_dmamode, |
@@ -328,10 +342,6 @@ static struct ata_port_operations ich_pata_ops = { | |||
328 | .set_dmamode = ich_set_dmamode, | 342 | .set_dmamode = ich_set_dmamode, |
329 | }; | 343 | }; |
330 | 344 | ||
331 | static struct ata_port_operations piix_sata_ops = { | ||
332 | .inherits = &ata_bmdma32_port_ops, | ||
333 | }; | ||
334 | |||
335 | static struct ata_port_operations piix_sidpr_sata_ops = { | 345 | static struct ata_port_operations piix_sidpr_sata_ops = { |
336 | .inherits = &piix_sata_ops, | 346 | .inherits = &piix_sata_ops, |
337 | .hardreset = sata_std_hardreset, | 347 | .hardreset = sata_std_hardreset, |
@@ -962,6 +972,14 @@ static int piix_sidpr_scr_write(struct ata_link *link, | |||
962 | return 0; | 972 | return 0; |
963 | } | 973 | } |
964 | 974 | ||
975 | static bool piix_irq_check(struct ata_port *ap) | ||
976 | { | ||
977 | if (unlikely(!ap->ioaddr.bmdma_addr)) | ||
978 | return false; | ||
979 | |||
980 | return ap->ops->bmdma_status(ap) & ATA_DMA_INTR; | ||
981 | } | ||
982 | |||
965 | #ifdef CONFIG_PM | 983 | #ifdef CONFIG_PM |
966 | static int piix_broken_suspend(void) | 984 | static int piix_broken_suspend(void) |
967 | { | 985 | { |
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 6728328f3bea..9c77b0d1a9d0 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c | |||
@@ -3211,6 +3211,7 @@ const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) | |||
3211 | int ata_timing_compute(struct ata_device *adev, unsigned short speed, | 3211 | int ata_timing_compute(struct ata_device *adev, unsigned short speed, |
3212 | struct ata_timing *t, int T, int UT) | 3212 | struct ata_timing *t, int T, int UT) |
3213 | { | 3213 | { |
3214 | const u16 *id = adev->id; | ||
3214 | const struct ata_timing *s; | 3215 | const struct ata_timing *s; |
3215 | struct ata_timing p; | 3216 | struct ata_timing p; |
3216 | 3217 | ||
@@ -3228,14 +3229,18 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed, | |||
3228 | * PIO/MW_DMA cycle timing. | 3229 | * PIO/MW_DMA cycle timing. |
3229 | */ | 3230 | */ |
3230 | 3231 | ||
3231 | if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ | 3232 | if (id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ |
3232 | memset(&p, 0, sizeof(p)); | 3233 | memset(&p, 0, sizeof(p)); |
3234 | |||
3233 | if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { | 3235 | if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) { |
3234 | if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO]; | 3236 | if (speed <= XFER_PIO_2) |
3235 | else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY]; | 3237 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO]; |
3236 | } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) { | 3238 | else if ((speed <= XFER_PIO_4) || |
3237 | p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN]; | 3239 | (speed == XFER_PIO_5 && !ata_id_is_cfa(id))) |
3238 | } | 3240 | p.cycle = p.cyc8b = id[ATA_ID_EIDE_PIO_IORDY]; |
3241 | } else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) | ||
3242 | p.cycle = id[ATA_ID_EIDE_DMA_MIN]; | ||
3243 | |||
3239 | ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); | 3244 | ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); |
3240 | } | 3245 | } |
3241 | 3246 | ||
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 730ef3c384ca..02441fd57e9e 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c | |||
@@ -1763,24 +1763,50 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance) | |||
1763 | { | 1763 | { |
1764 | struct ata_host *host = dev_instance; | 1764 | struct ata_host *host = dev_instance; |
1765 | unsigned int i; | 1765 | unsigned int i; |
1766 | unsigned int handled = 0; | 1766 | unsigned int handled = 0, polling = 0; |
1767 | unsigned long flags; | 1767 | unsigned long flags; |
1768 | 1768 | ||
1769 | /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ | 1769 | /* TODO: make _irqsave conditional on x86 PCI IDE legacy mode */ |
1770 | spin_lock_irqsave(&host->lock, flags); | 1770 | spin_lock_irqsave(&host->lock, flags); |
1771 | 1771 | ||
1772 | for (i = 0; i < host->n_ports; i++) { | 1772 | for (i = 0; i < host->n_ports; i++) { |
1773 | struct ata_port *ap; | 1773 | struct ata_port *ap = host->ports[i]; |
1774 | struct ata_queued_cmd *qc; | ||
1774 | 1775 | ||
1775 | ap = host->ports[i]; | 1776 | if (unlikely(ap->flags & ATA_FLAG_DISABLED)) |
1776 | if (ap && | 1777 | continue; |
1777 | !(ap->flags & ATA_FLAG_DISABLED)) { | ||
1778 | struct ata_queued_cmd *qc; | ||
1779 | 1778 | ||
1780 | qc = ata_qc_from_tag(ap, ap->link.active_tag); | 1779 | qc = ata_qc_from_tag(ap, ap->link.active_tag); |
1781 | if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)) && | 1780 | if (qc) { |
1782 | (qc->flags & ATA_QCFLAG_ACTIVE)) | 1781 | if (!(qc->tf.flags & ATA_TFLAG_POLLING)) |
1783 | handled |= ata_sff_host_intr(ap, qc); | 1782 | handled |= ata_sff_host_intr(ap, qc); |
1783 | else | ||
1784 | polling |= 1 << i; | ||
1785 | } | ||
1786 | } | ||
1787 | |||
1788 | /* | ||
1789 | * If no port was expecting IRQ but the controller is actually | ||
1790 | * asserting IRQ line, nobody cared will ensue. Check IRQ | ||
1791 | * pending status if available and clear spurious IRQ. | ||
1792 | */ | ||
1793 | if (!handled) { | ||
1794 | for (i = 0; i < host->n_ports; i++) { | ||
1795 | struct ata_port *ap = host->ports[i]; | ||
1796 | |||
1797 | if (polling & (1 << i)) | ||
1798 | continue; | ||
1799 | |||
1800 | if (!ap->ops->sff_irq_check || | ||
1801 | !ap->ops->sff_irq_check(ap)) | ||
1802 | continue; | ||
1803 | |||
1804 | if (printk_ratelimit()) | ||
1805 | ata_port_printk(ap, KERN_INFO, | ||
1806 | "clearing spurious IRQ\n"); | ||
1807 | |||
1808 | ap->ops->sff_check_status(ap); | ||
1809 | ap->ops->sff_irq_clear(ap); | ||
1784 | } | 1810 | } |
1785 | } | 1811 | } |
1786 | 1812 | ||
@@ -3011,6 +3037,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); | |||
3011 | * @ppi: array of port_info, must be enough for two ports | 3037 | * @ppi: array of port_info, must be enough for two ports |
3012 | * @sht: scsi_host_template to use when registering the host | 3038 | * @sht: scsi_host_template to use when registering the host |
3013 | * @host_priv: host private_data | 3039 | * @host_priv: host private_data |
3040 | * @hflag: host flags | ||
3014 | * | 3041 | * |
3015 | * This is a helper function which can be called from a driver's | 3042 | * This is a helper function which can be called from a driver's |
3016 | * xxx_init_one() probe function if the hardware uses traditional | 3043 | * xxx_init_one() probe function if the hardware uses traditional |
@@ -3031,8 +3058,8 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); | |||
3031 | * Zero on success, negative on errno-based value on error. | 3058 | * Zero on success, negative on errno-based value on error. |
3032 | */ | 3059 | */ |
3033 | int ata_pci_sff_init_one(struct pci_dev *pdev, | 3060 | int ata_pci_sff_init_one(struct pci_dev *pdev, |
3034 | const struct ata_port_info * const *ppi, | 3061 | const struct ata_port_info * const *ppi, |
3035 | struct scsi_host_template *sht, void *host_priv) | 3062 | struct scsi_host_template *sht, void *host_priv, int hflag) |
3036 | { | 3063 | { |
3037 | struct device *dev = &pdev->dev; | 3064 | struct device *dev = &pdev->dev; |
3038 | const struct ata_port_info *pi = NULL; | 3065 | const struct ata_port_info *pi = NULL; |
@@ -3067,6 +3094,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev, | |||
3067 | if (rc) | 3094 | if (rc) |
3068 | goto out; | 3095 | goto out; |
3069 | host->private_data = host_priv; | 3096 | host->private_data = host_priv; |
3097 | host->flags |= hflag; | ||
3070 | 3098 | ||
3071 | pci_set_master(pdev); | 3099 | pci_set_master(pdev); |
3072 | rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); | 3100 | rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); |
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c index d8f35fe44421..294f3020a78a 100644 --- a/drivers/ata/pata_acpi.c +++ b/drivers/ata/pata_acpi.c | |||
@@ -259,7 +259,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id) | |||
259 | return rc; | 259 | return rc; |
260 | pcim_pin_device(pdev); | 260 | pcim_pin_device(pdev); |
261 | } | 261 | } |
262 | return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL); | 262 | return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0); |
263 | } | 263 | } |
264 | 264 | ||
265 | static const struct pci_device_id pacpi_pci_tbl[] = { | 265 | static const struct pci_device_id pacpi_pci_tbl[] = { |
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index 9434114b2ca8..dc61b72f751c 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c | |||
@@ -159,8 +159,7 @@ static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int o | |||
159 | * ali_program_modes - load mode registers | 159 | * ali_program_modes - load mode registers |
160 | * @ap: ALi channel to load | 160 | * @ap: ALi channel to load |
161 | * @adev: Device the timing is for | 161 | * @adev: Device the timing is for |
162 | * @cmd: Command timing | 162 | * @t: timing data |
163 | * @data: Data timing | ||
164 | * @ultra: UDMA timing or zero for off | 163 | * @ultra: UDMA timing or zero for off |
165 | * | 164 | * |
166 | * Loads the timing registers for cmd/data and disable UDMA if | 165 | * Loads the timing registers for cmd/data and disable UDMA if |
@@ -202,8 +201,7 @@ static void ali_program_modes(struct ata_port *ap, struct ata_device *adev, stru | |||
202 | * @ap: ATA interface | 201 | * @ap: ATA interface |
203 | * @adev: ATA device | 202 | * @adev: ATA device |
204 | * | 203 | * |
205 | * Program the ALi registers for PIO mode. FIXME: add timings for | 204 | * Program the ALi registers for PIO mode. |
206 | * PIO5. | ||
207 | */ | 205 | */ |
208 | 206 | ||
209 | static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) | 207 | static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) |
@@ -237,7 +235,7 @@ static void ali_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
237 | * @ap: ATA interface | 235 | * @ap: ATA interface |
238 | * @adev: ATA device | 236 | * @adev: ATA device |
239 | * | 237 | * |
240 | * FIXME: MWDMA timings | 238 | * Program the ALi registers for DMA mode. |
241 | */ | 239 | */ |
242 | 240 | ||
243 | static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 241 | static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
@@ -585,7 +583,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
585 | ppi[0] = &info_20_udma; | 583 | ppi[0] = &info_20_udma; |
586 | } | 584 | } |
587 | 585 | ||
588 | return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL); | 586 | return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0); |
589 | } | 587 | } |
590 | 588 | ||
591 | #ifdef CONFIG_PM | 589 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index 567f3f72774e..d95eca9c547e 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c | |||
@@ -574,7 +574,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
574 | } | 574 | } |
575 | 575 | ||
576 | /* And fire it up */ | 576 | /* And fire it up */ |
577 | return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv); | 577 | return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0); |
578 | } | 578 | } |
579 | 579 | ||
580 | #ifdef CONFIG_PM | 580 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c index d332cfdb0f30..4d066d6c30fa 100644 --- a/drivers/ata/pata_artop.c +++ b/drivers/ata/pata_artop.c | |||
@@ -421,7 +421,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id) | |||
421 | 421 | ||
422 | BUG_ON(ppi[0] == NULL); | 422 | BUG_ON(ppi[0] == NULL); |
423 | 423 | ||
424 | return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL); | 424 | return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0); |
425 | } | 425 | } |
426 | 426 | ||
427 | static const struct pci_device_id artop_pci_tbl[] = { | 427 | static const struct pci_device_id artop_pci_tbl[] = { |
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c index 41c94b1ae493..376dd380b43c 100644 --- a/drivers/ata/pata_at91.c +++ b/drivers/ata/pata_at91.c | |||
@@ -153,8 +153,8 @@ static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
153 | /* Compute ATA timing and set it to SMC */ | 153 | /* Compute ATA timing and set it to SMC */ |
154 | ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); | 154 | ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0); |
155 | if (ret) { | 155 | if (ret) { |
156 | dev_warn(ap->dev, "Failed to compute ATA timing %d, \ | 156 | dev_warn(ap->dev, "Failed to compute ATA timing %d, " |
157 | set PIO_0 timing\n", ret); | 157 | "set PIO_0 timing\n", ret); |
158 | set_smc_timing(ap->dev, info, &initial_timing); | 158 | set_smc_timing(ap->dev, info, &initial_timing); |
159 | } else { | 159 | } else { |
160 | set_smc_timing(ap->dev, info, &timing); | 160 | set_smc_timing(ap->dev, info, &timing); |
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index ae4454d4e955..cbaf2eddac6b 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c | |||
@@ -1,7 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * pata_atiixp.c - ATI PATA for new ATA layer | 2 | * pata_atiixp.c - ATI PATA for new ATA layer |
3 | * (C) 2005 Red Hat Inc | 3 | * (C) 2005 Red Hat Inc |
4 | * (C) 2009 Bartlomiej Zolnierkiewicz | 4 | * (C) 2009-2010 Bartlomiej Zolnierkiewicz |
5 | * | 5 | * |
6 | * Based on | 6 | * Based on |
7 | * | 7 | * |
@@ -46,6 +46,8 @@ static int atiixp_cable_detect(struct ata_port *ap) | |||
46 | return ATA_CBL_PATA40; | 46 | return ATA_CBL_PATA40; |
47 | } | 47 | } |
48 | 48 | ||
49 | static DEFINE_SPINLOCK(atiixp_lock); | ||
50 | |||
49 | /** | 51 | /** |
50 | * atiixp_set_pio_timing - set initial PIO mode data | 52 | * atiixp_set_pio_timing - set initial PIO mode data |
51 | * @ap: ATA interface | 53 | * @ap: ATA interface |
@@ -88,7 +90,10 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, | |||
88 | 90 | ||
89 | static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) | 91 | static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev) |
90 | { | 92 | { |
93 | unsigned long flags; | ||
94 | spin_lock_irqsave(&atiixp_lock, flags); | ||
91 | atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); | 95 | atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0); |
96 | spin_unlock_irqrestore(&atiixp_lock, flags); | ||
92 | } | 97 | } |
93 | 98 | ||
94 | /** | 99 | /** |
@@ -108,6 +113,9 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |||
108 | int dma = adev->dma_mode; | 113 | int dma = adev->dma_mode; |
109 | int dn = 2 * ap->port_no + adev->devno; | 114 | int dn = 2 * ap->port_no + adev->devno; |
110 | int wanted_pio; | 115 | int wanted_pio; |
116 | unsigned long flags; | ||
117 | |||
118 | spin_lock_irqsave(&atiixp_lock, flags); | ||
111 | 119 | ||
112 | if (adev->dma_mode >= XFER_UDMA_0) { | 120 | if (adev->dma_mode >= XFER_UDMA_0) { |
113 | u16 udma_mode_data; | 121 | u16 udma_mode_data; |
@@ -145,6 +153,7 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev) | |||
145 | 153 | ||
146 | if (adev->pio_mode != wanted_pio) | 154 | if (adev->pio_mode != wanted_pio) |
147 | atiixp_set_pio_timing(ap, adev, wanted_pio); | 155 | atiixp_set_pio_timing(ap, adev, wanted_pio); |
156 | spin_unlock_irqrestore(&atiixp_lock, flags); | ||
148 | } | 157 | } |
149 | 158 | ||
150 | /** | 159 | /** |
@@ -237,7 +246,8 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
237 | if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i])) | 246 | if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i])) |
238 | ppi[i] = &ata_dummy_port_info; | 247 | ppi[i] = &ata_dummy_port_info; |
239 | 248 | ||
240 | return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL); | 249 | return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL, |
250 | ATA_HOST_PARALLEL_SCAN); | ||
241 | } | 251 | } |
242 | 252 | ||
243 | static const struct pci_device_id atiixp[] = { | 253 | static const struct pci_device_id atiixp[] = { |
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c index 5acf9fa9b39f..6cd5d5dd9e3b 100644 --- a/drivers/ata/pata_cmd640.c +++ b/drivers/ata/pata_cmd640.c | |||
@@ -223,7 +223,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
223 | 223 | ||
224 | cmd640_hardware_init(pdev); | 224 | cmd640_hardware_init(pdev); |
225 | 225 | ||
226 | return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL); | 226 | return ata_pci_sff_init_one(pdev, ppi, &cmd640_sht, NULL, 0); |
227 | } | 227 | } |
228 | 228 | ||
229 | #ifdef CONFIG_PM | 229 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c index 0efb1f58f255..4c81a71b8877 100644 --- a/drivers/ata/pata_cmd64x.c +++ b/drivers/ata/pata_cmd64x.c | |||
@@ -2,6 +2,7 @@ | |||
2 | * pata_cmd64x.c - CMD64x PATA for new ATA layer | 2 | * pata_cmd64x.c - CMD64x PATA for new ATA layer |
3 | * (C) 2005 Red Hat Inc | 3 | * (C) 2005 Red Hat Inc |
4 | * Alan Cox <alan@lxorguk.ukuu.org.uk> | 4 | * Alan Cox <alan@lxorguk.ukuu.org.uk> |
5 | * (C) 2009-2010 Bartlomiej Zolnierkiewicz | ||
5 | * | 6 | * |
6 | * Based upon | 7 | * Based upon |
7 | * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 | 8 | * linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002 |
@@ -39,11 +40,7 @@ | |||
39 | 40 | ||
40 | enum { | 41 | enum { |
41 | CFR = 0x50, | 42 | CFR = 0x50, |
42 | CFR_INTR_CH0 = 0x02, | 43 | CFR_INTR_CH0 = 0x04, |
43 | CNTRL = 0x51, | ||
44 | CNTRL_DIS_RA0 = 0x40, | ||
45 | CNTRL_DIS_RA1 = 0x80, | ||
46 | CNTRL_ENA_2ND = 0x08, | ||
47 | CMDTIM = 0x52, | 44 | CMDTIM = 0x52, |
48 | ARTTIM0 = 0x53, | 45 | ARTTIM0 = 0x53, |
49 | DRWTIM0 = 0x54, | 46 | DRWTIM0 = 0x54, |
@@ -53,9 +50,6 @@ enum { | |||
53 | ARTTIM23_DIS_RA2 = 0x04, | 50 | ARTTIM23_DIS_RA2 = 0x04, |
54 | ARTTIM23_DIS_RA3 = 0x08, | 51 | ARTTIM23_DIS_RA3 = 0x08, |
55 | ARTTIM23_INTR_CH1 = 0x10, | 52 | ARTTIM23_INTR_CH1 = 0x10, |
56 | ARTTIM2 = 0x57, | ||
57 | ARTTIM3 = 0x57, | ||
58 | DRWTIM23 = 0x58, | ||
59 | DRWTIM2 = 0x58, | 53 | DRWTIM2 = 0x58, |
60 | BRST = 0x59, | 54 | BRST = 0x59, |
61 | DRWTIM3 = 0x5b, | 55 | DRWTIM3 = 0x5b, |
@@ -63,14 +57,11 @@ enum { | |||
63 | MRDMODE = 0x71, | 57 | MRDMODE = 0x71, |
64 | MRDMODE_INTR_CH0 = 0x04, | 58 | MRDMODE_INTR_CH0 = 0x04, |
65 | MRDMODE_INTR_CH1 = 0x08, | 59 | MRDMODE_INTR_CH1 = 0x08, |
66 | MRDMODE_BLK_CH0 = 0x10, | ||
67 | MRDMODE_BLK_CH1 = 0x20, | ||
68 | BMIDESR0 = 0x72, | 60 | BMIDESR0 = 0x72, |
69 | UDIDETCR0 = 0x73, | 61 | UDIDETCR0 = 0x73, |
70 | DTPR0 = 0x74, | 62 | DTPR0 = 0x74, |
71 | BMIDECR1 = 0x78, | 63 | BMIDECR1 = 0x78, |
72 | BMIDECSR = 0x79, | 64 | BMIDECSR = 0x79, |
73 | BMIDESR1 = 0x7A, | ||
74 | UDIDETCR1 = 0x7B, | 65 | UDIDETCR1 = 0x7B, |
75 | DTPR1 = 0x7C | 66 | DTPR1 = 0x7C |
76 | }; | 67 | }; |
@@ -130,8 +121,14 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m | |||
130 | 121 | ||
131 | if (pair) { | 122 | if (pair) { |
132 | struct ata_timing tp; | 123 | struct ata_timing tp; |
124 | |||
133 | ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); | 125 | ata_timing_compute(pair, pair->pio_mode, &tp, T, 0); |
134 | ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); | 126 | ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP); |
127 | if (pair->dma_mode) { | ||
128 | ata_timing_compute(pair, pair->dma_mode, | ||
129 | &tp, T, 0); | ||
130 | ata_timing_merge(&tp, &t, &t, ATA_TIMING_SETUP); | ||
131 | } | ||
135 | } | 132 | } |
136 | } | 133 | } |
137 | 134 | ||
@@ -147,7 +144,9 @@ static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 m | |||
147 | /* Now convert the clocks into values we can actually stuff into | 144 | /* Now convert the clocks into values we can actually stuff into |
148 | the chip */ | 145 | the chip */ |
149 | 146 | ||
150 | if (t.recover > 1) | 147 | if (t.recover == 16) |
148 | t.recover = 0; | ||
149 | else if (t.recover > 1) | ||
151 | t.recover--; | 150 | t.recover--; |
152 | else | 151 | else |
153 | t.recover = 15; | 152 | t.recover = 15; |
@@ -245,7 +244,7 @@ static void cmd648_bmdma_stop(struct ata_queued_cmd *qc) | |||
245 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 244 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
246 | u8 dma_intr; | 245 | u8 dma_intr; |
247 | int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; | 246 | int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0; |
248 | int dma_reg = ap->port_no ? ARTTIM2 : CFR; | 247 | int dma_reg = ap->port_no ? ARTTIM23 : CFR; |
249 | 248 | ||
250 | ata_bmdma_stop(qc); | 249 | ata_bmdma_stop(qc); |
251 | 250 | ||
@@ -368,7 +367,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
368 | pci_write_config_byte(pdev, UDIDETCR0, 0xF0); | 367 | pci_write_config_byte(pdev, UDIDETCR0, 0xF0); |
369 | #endif | 368 | #endif |
370 | 369 | ||
371 | return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL); | 370 | return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0); |
372 | } | 371 | } |
373 | 372 | ||
374 | #ifdef CONFIG_PM | 373 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index c974b05e4129..738ad2e14a97 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c | |||
@@ -324,7 +324,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
324 | ppi[1] = &info_palmax_secondary; | 324 | ppi[1] = &info_palmax_secondary; |
325 | 325 | ||
326 | /* Now kick off ATA set up */ | 326 | /* Now kick off ATA set up */ |
327 | return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL); | 327 | return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0); |
328 | } | 328 | } |
329 | 329 | ||
330 | #ifdef CONFIG_PM | 330 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c index 71cef9a962d4..a02e6459fdcc 100644 --- a/drivers/ata/pata_cs5535.c +++ b/drivers/ata/pata_cs5535.c | |||
@@ -100,7 +100,7 @@ static int cs5535_cable_detect(struct ata_port *ap) | |||
100 | static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) | 100 | static void cs5535_set_piomode(struct ata_port *ap, struct ata_device *adev) |
101 | { | 101 | { |
102 | static const u16 pio_timings[5] = { | 102 | static const u16 pio_timings[5] = { |
103 | 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 | 103 | 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 |
104 | }; | 104 | }; |
105 | static const u16 pio_cmd_timings[5] = { | 105 | static const u16 pio_cmd_timings[5] = { |
106 | 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 | 106 | 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 |
@@ -198,7 +198,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
198 | rdmsr(ATAC_CH0D1_PIO, timings, dummy); | 198 | rdmsr(ATAC_CH0D1_PIO, timings, dummy); |
199 | if (CS5535_BAD_PIO(timings)) | 199 | if (CS5535_BAD_PIO(timings)) |
200 | wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); | 200 | wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0); |
201 | return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL); | 201 | return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0); |
202 | } | 202 | } |
203 | 203 | ||
204 | static const struct pci_device_id cs5535[] = { | 204 | static const struct pci_device_id cs5535[] = { |
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c index ffee3978ec83..914ae3506ff5 100644 --- a/drivers/ata/pata_cs5536.c +++ b/drivers/ata/pata_cs5536.c | |||
@@ -260,7 +260,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
260 | return -ENODEV; | 260 | return -ENODEV; |
261 | } | 261 | } |
262 | 262 | ||
263 | return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL); | 263 | return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0); |
264 | } | 264 | } |
265 | 265 | ||
266 | static const struct pci_device_id cs5536[] = { | 266 | static const struct pci_device_id cs5536[] = { |
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c index 8fb040bf7361..0fcc096b8dac 100644 --- a/drivers/ata/pata_cypress.c +++ b/drivers/ata/pata_cypress.c | |||
@@ -62,14 +62,16 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
62 | return; | 62 | return; |
63 | } | 63 | } |
64 | 64 | ||
65 | time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4); | 65 | time_16 = clamp_val(t.recover - 1, 0, 15) | |
66 | time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4); | 66 | (clamp_val(t.active - 1, 0, 15) << 4); |
67 | time_8 = clamp_val(t.act8b - 1, 0, 15) | | ||
68 | (clamp_val(t.rec8b - 1, 0, 15) << 4); | ||
67 | 69 | ||
68 | if (adev->devno == 0) { | 70 | if (adev->devno == 0) { |
69 | pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); | 71 | pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); |
70 | 72 | ||
71 | addr &= ~0x0F; /* Mask bits */ | 73 | addr &= ~0x0F; /* Mask bits */ |
72 | addr |= clamp_val(t.setup, 0, 15); | 74 | addr |= clamp_val(t.setup - 1, 0, 15); |
73 | 75 | ||
74 | pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); | 76 | pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); |
75 | pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); | 77 | pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16); |
@@ -79,7 +81,7 @@ static void cy82c693_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
79 | pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); | 81 | pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr); |
80 | 82 | ||
81 | addr &= ~0xF0; /* Mask bits */ | 83 | addr &= ~0xF0; /* Mask bits */ |
82 | addr |= (clamp_val(t.setup, 0, 15) << 4); | 84 | addr |= (clamp_val(t.setup - 1, 0, 15) << 4); |
83 | 85 | ||
84 | pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); | 86 | pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr); |
85 | pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); | 87 | pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16); |
@@ -136,7 +138,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i | |||
136 | if (PCI_FUNC(pdev->devfn) != 1) | 138 | if (PCI_FUNC(pdev->devfn) != 1) |
137 | return -ENODEV; | 139 | return -ENODEV; |
138 | 140 | ||
139 | return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL); | 141 | return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0); |
140 | } | 142 | } |
141 | 143 | ||
142 | static const struct pci_device_id cy82c693[] = { | 144 | static const struct pci_device_id cy82c693[] = { |
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c index b2e71e6473ed..3bac0e079691 100644 --- a/drivers/ata/pata_efar.c +++ b/drivers/ata/pata_efar.c | |||
@@ -2,7 +2,7 @@ | |||
2 | * pata_efar.c - EFAR PIIX clone controller driver | 2 | * pata_efar.c - EFAR PIIX clone controller driver |
3 | * | 3 | * |
4 | * (C) 2005 Red Hat | 4 | * (C) 2005 Red Hat |
5 | * (C) 2009 Bartlomiej Zolnierkiewicz | 5 | * (C) 2009-2010 Bartlomiej Zolnierkiewicz |
6 | * | 6 | * |
7 | * Some parts based on ata_piix.c by Jeff Garzik and others. | 7 | * Some parts based on ata_piix.c by Jeff Garzik and others. |
8 | * | 8 | * |
@@ -68,6 +68,8 @@ static int efar_cable_detect(struct ata_port *ap) | |||
68 | return ATA_CBL_PATA80; | 68 | return ATA_CBL_PATA80; |
69 | } | 69 | } |
70 | 70 | ||
71 | static DEFINE_SPINLOCK(efar_lock); | ||
72 | |||
71 | /** | 73 | /** |
72 | * efar_set_piomode - Initialize host controller PATA PIO timings | 74 | * efar_set_piomode - Initialize host controller PATA PIO timings |
73 | * @ap: Port whose timings we are configuring | 75 | * @ap: Port whose timings we are configuring |
@@ -84,7 +86,9 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) | |||
84 | unsigned int pio = adev->pio_mode - XFER_PIO_0; | 86 | unsigned int pio = adev->pio_mode - XFER_PIO_0; |
85 | struct pci_dev *dev = to_pci_dev(ap->host->dev); | 87 | struct pci_dev *dev = to_pci_dev(ap->host->dev); |
86 | unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; | 88 | unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; |
89 | unsigned long flags; | ||
87 | u16 idetm_data; | 90 | u16 idetm_data; |
91 | u8 udma_enable; | ||
88 | int control = 0; | 92 | int control = 0; |
89 | 93 | ||
90 | /* | 94 | /* |
@@ -107,6 +111,8 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) | |||
107 | if (adev->class == ATA_DEV_ATA) | 111 | if (adev->class == ATA_DEV_ATA) |
108 | control |= 4; /* PPE */ | 112 | control |= 4; /* PPE */ |
109 | 113 | ||
114 | spin_lock_irqsave(&efar_lock, flags); | ||
115 | |||
110 | pci_read_config_word(dev, idetm_port, &idetm_data); | 116 | pci_read_config_word(dev, idetm_port, &idetm_data); |
111 | 117 | ||
112 | /* Set PPE, IE, and TIME as appropriate */ | 118 | /* Set PPE, IE, and TIME as appropriate */ |
@@ -131,6 +137,11 @@ static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) | |||
131 | 137 | ||
132 | idetm_data |= 0x4000; /* Ensure SITRE is set */ | 138 | idetm_data |= 0x4000; /* Ensure SITRE is set */ |
133 | pci_write_config_word(dev, idetm_port, idetm_data); | 139 | pci_write_config_word(dev, idetm_port, idetm_data); |
140 | |||
141 | pci_read_config_byte(dev, 0x48, &udma_enable); | ||
142 | udma_enable &= ~(1 << (2 * ap->port_no + adev->devno)); | ||
143 | pci_write_config_byte(dev, 0x48, udma_enable); | ||
144 | spin_unlock_irqrestore(&efar_lock, flags); | ||
134 | } | 145 | } |
135 | 146 | ||
136 | /** | 147 | /** |
@@ -151,6 +162,7 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |||
151 | u16 master_data; | 162 | u16 master_data; |
152 | u8 speed = adev->dma_mode; | 163 | u8 speed = adev->dma_mode; |
153 | int devid = adev->devno + 2 * ap->port_no; | 164 | int devid = adev->devno + 2 * ap->port_no; |
165 | unsigned long flags; | ||
154 | u8 udma_enable; | 166 | u8 udma_enable; |
155 | 167 | ||
156 | static const /* ISP RTC */ | 168 | static const /* ISP RTC */ |
@@ -160,6 +172,8 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |||
160 | { 2, 1 }, | 172 | { 2, 1 }, |
161 | { 2, 3 }, }; | 173 | { 2, 3 }, }; |
162 | 174 | ||
175 | spin_lock_irqsave(&efar_lock, flags); | ||
176 | |||
163 | pci_read_config_word(dev, master_port, &master_data); | 177 | pci_read_config_word(dev, master_port, &master_data); |
164 | pci_read_config_byte(dev, 0x48, &udma_enable); | 178 | pci_read_config_byte(dev, 0x48, &udma_enable); |
165 | 179 | ||
@@ -217,6 +231,7 @@ static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) | |||
217 | pci_write_config_word(dev, master_port, master_data); | 231 | pci_write_config_word(dev, master_port, master_data); |
218 | } | 232 | } |
219 | pci_write_config_byte(dev, 0x48, udma_enable); | 233 | pci_write_config_byte(dev, 0x48, udma_enable); |
234 | spin_unlock_irqrestore(&efar_lock, flags); | ||
220 | } | 235 | } |
221 | 236 | ||
222 | static struct scsi_host_template efar_sht = { | 237 | static struct scsi_host_template efar_sht = { |
@@ -256,13 +271,14 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | |||
256 | .udma_mask = ATA_UDMA4, | 271 | .udma_mask = ATA_UDMA4, |
257 | .port_ops = &efar_ops, | 272 | .port_ops = &efar_ops, |
258 | }; | 273 | }; |
259 | const struct ata_port_info *ppi[] = { &info, NULL }; | 274 | const struct ata_port_info *ppi[] = { &info, &info }; |
260 | 275 | ||
261 | if (!printed_version++) | 276 | if (!printed_version++) |
262 | dev_printk(KERN_DEBUG, &pdev->dev, | 277 | dev_printk(KERN_DEBUG, &pdev->dev, |
263 | "version " DRV_VERSION "\n"); | 278 | "version " DRV_VERSION "\n"); |
264 | 279 | ||
265 | return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL); | 280 | return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL, |
281 | ATA_HOST_PARALLEL_SCAN); | ||
266 | } | 282 | } |
267 | 283 | ||
268 | static const struct pci_device_id efar_pci_tbl[] = { | 284 | static const struct pci_device_id efar_pci_tbl[] = { |
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c index 0bd48e8f21bd..af49bfb57247 100644 --- a/drivers/ata/pata_hpt366.c +++ b/drivers/ata/pata_hpt366.c | |||
@@ -11,9 +11,7 @@ | |||
11 | * | 11 | * |
12 | * | 12 | * |
13 | * TODO | 13 | * TODO |
14 | * Maybe PLL mode | 14 | * Look into engine reset on timeout errors. Should not be required. |
15 | * Look into engine reset on timeout errors. Should not be | ||
16 | * required. | ||
17 | */ | 15 | */ |
18 | 16 | ||
19 | 17 | ||
@@ -27,7 +25,7 @@ | |||
27 | #include <linux/libata.h> | 25 | #include <linux/libata.h> |
28 | 26 | ||
29 | #define DRV_NAME "pata_hpt366" | 27 | #define DRV_NAME "pata_hpt366" |
30 | #define DRV_VERSION "0.6.7" | 28 | #define DRV_VERSION "0.6.8" |
31 | 29 | ||
32 | struct hpt_clock { | 30 | struct hpt_clock { |
33 | u8 xfer_mode; | 31 | u8 xfer_mode; |
@@ -207,17 +205,8 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, | |||
207 | { | 205 | { |
208 | struct hpt_clock *clocks = ap->host->private_data; | 206 | struct hpt_clock *clocks = ap->host->private_data; |
209 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 207 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
210 | u32 addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); | 208 | u32 addr = 0x40 + 4 * adev->devno; |
211 | u32 addr2 = 0x51 + 4 * ap->port_no; | ||
212 | u32 mask, reg; | 209 | u32 mask, reg; |
213 | u8 fast; | ||
214 | |||
215 | /* Fast interrupt prediction disable, hold off interrupt disable */ | ||
216 | pci_read_config_byte(pdev, addr2, &fast); | ||
217 | if (fast & 0x80) { | ||
218 | fast &= ~0x80; | ||
219 | pci_write_config_byte(pdev, addr2, fast); | ||
220 | } | ||
221 | 210 | ||
222 | /* determine timing mask and find matching clock entry */ | 211 | /* determine timing mask and find matching clock entry */ |
223 | if (mode < XFER_MW_DMA_0) | 212 | if (mode < XFER_MW_DMA_0) |
@@ -240,9 +229,9 @@ static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev, | |||
240 | * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid | 229 | * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid |
241 | * problems handling I/O errors later. | 230 | * problems handling I/O errors later. |
242 | */ | 231 | */ |
243 | pci_read_config_dword(pdev, addr1, ®); | 232 | pci_read_config_dword(pdev, addr, ®); |
244 | reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000; | 233 | reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000; |
245 | pci_write_config_dword(pdev, addr1, reg); | 234 | pci_write_config_dword(pdev, addr, reg); |
246 | } | 235 | } |
247 | 236 | ||
248 | /** | 237 | /** |
@@ -372,7 +361,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
372 | break; | 361 | break; |
373 | } | 362 | } |
374 | /* Now kick off ATA set up */ | 363 | /* Now kick off ATA set up */ |
375 | return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv); | 364 | return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0); |
376 | } | 365 | } |
377 | 366 | ||
378 | #ifdef CONFIG_PM | 367 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 4224cfccedef..8839307a64cf 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c | |||
@@ -24,7 +24,7 @@ | |||
24 | #include <linux/libata.h> | 24 | #include <linux/libata.h> |
25 | 25 | ||
26 | #define DRV_NAME "pata_hpt37x" | 26 | #define DRV_NAME "pata_hpt37x" |
27 | #define DRV_VERSION "0.6.14" | 27 | #define DRV_VERSION "0.6.15" |
28 | 28 | ||
29 | struct hpt_clock { | 29 | struct hpt_clock { |
30 | u8 xfer_speed; | 30 | u8 xfer_speed; |
@@ -39,25 +39,24 @@ struct hpt_chip { | |||
39 | 39 | ||
40 | /* key for bus clock timings | 40 | /* key for bus clock timings |
41 | * bit | 41 | * bit |
42 | * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW | 42 | * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. |
43 | * DMA. cycles = value + 1 | 43 | * cycles = value + 1 |
44 | * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW | 44 | * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. |
45 | * DMA. cycles = value + 1 | 45 | * cycles = value + 1 |
46 | * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file | 46 | * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file |
47 | * register access. | 47 | * register access. |
48 | * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file | 48 | * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file |
49 | * register access. | 49 | * register access. |
50 | * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. | 50 | * 18:20 udma_cycle_time. Clock cycles for UDMA xfer. |
51 | * during task file register access. | 51 | * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock. |
52 | * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA | 52 | * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer. |
53 | * xfer. | 53 | * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file |
54 | * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task | ||
55 | * register access. | 54 | * register access. |
56 | * 28 UDMA enable | 55 | * 28 UDMA enable. |
57 | * 29 DMA enable | 56 | * 29 DMA enable. |
58 | * 30 PIO_MST enable. if set, the chip is in bus master mode during | 57 | * 30 PIO_MST enable. If set, the chip is in bus master mode during |
59 | * PIO. | 58 | * PIO xfer. |
60 | * 31 FIFO enable. | 59 | * 31 FIFO enable. Only for PIO. |
61 | */ | 60 | */ |
62 | 61 | ||
63 | static struct hpt_clock hpt37x_timings_33[] = { | 62 | static struct hpt_clock hpt37x_timings_33[] = { |
@@ -384,20 +383,12 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) | |||
384 | return ata_sff_prereset(link, deadline); | 383 | return ata_sff_prereset(link, deadline); |
385 | } | 384 | } |
386 | 385 | ||
387 | /** | 386 | static void hpt370_set_mode(struct ata_port *ap, struct ata_device *adev, |
388 | * hpt370_set_piomode - PIO setup | 387 | u8 mode) |
389 | * @ap: ATA interface | ||
390 | * @adev: device on the interface | ||
391 | * | ||
392 | * Perform PIO mode setup. | ||
393 | */ | ||
394 | |||
395 | static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) | ||
396 | { | 388 | { |
397 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 389 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
398 | u32 addr1, addr2; | 390 | u32 addr1, addr2; |
399 | u32 reg; | 391 | u32 reg, timing, mask; |
400 | u32 mode; | ||
401 | u8 fast; | 392 | u8 fast; |
402 | 393 | ||
403 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); | 394 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); |
@@ -409,11 +400,31 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
409 | fast |= 0x01; | 400 | fast |= 0x01; |
410 | pci_write_config_byte(pdev, addr2, fast); | 401 | pci_write_config_byte(pdev, addr2, fast); |
411 | 402 | ||
403 | /* Determine timing mask and find matching mode entry */ | ||
404 | if (mode < XFER_MW_DMA_0) | ||
405 | mask = 0xcfc3ffff; | ||
406 | else if (mode < XFER_UDMA_0) | ||
407 | mask = 0x31c001ff; | ||
408 | else | ||
409 | mask = 0x303c0000; | ||
410 | |||
411 | timing = hpt37x_find_mode(ap, mode); | ||
412 | |||
412 | pci_read_config_dword(pdev, addr1, ®); | 413 | pci_read_config_dword(pdev, addr1, ®); |
413 | mode = hpt37x_find_mode(ap, adev->pio_mode); | 414 | reg = (reg & ~mask) | (timing & mask); |
414 | mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ | 415 | pci_write_config_dword(pdev, addr1, reg); |
415 | reg &= ~0xCFC3FFFF; /* Strip timing bits */ | 416 | } |
416 | pci_write_config_dword(pdev, addr1, reg | mode); | 417 | /** |
418 | * hpt370_set_piomode - PIO setup | ||
419 | * @ap: ATA interface | ||
420 | * @adev: device on the interface | ||
421 | * | ||
422 | * Perform PIO mode setup. | ||
423 | */ | ||
424 | |||
425 | static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) | ||
426 | { | ||
427 | hpt370_set_mode(ap, adev, adev->pio_mode); | ||
417 | } | 428 | } |
418 | 429 | ||
419 | /** | 430 | /** |
@@ -421,33 +432,12 @@ static void hpt370_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
421 | * @ap: ATA interface | 432 | * @ap: ATA interface |
422 | * @adev: Device being configured | 433 | * @adev: Device being configured |
423 | * | 434 | * |
424 | * Set up the channel for MWDMA or UDMA modes. Much the same as with | 435 | * Set up the channel for MWDMA or UDMA modes. |
425 | * PIO, load the mode number and then set MWDMA or UDMA flag. | ||
426 | */ | 436 | */ |
427 | 437 | ||
428 | static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 438 | static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
429 | { | 439 | { |
430 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 440 | hpt370_set_mode(ap, adev, adev->dma_mode); |
431 | u32 addr1, addr2; | ||
432 | u32 reg, mode, mask; | ||
433 | u8 fast; | ||
434 | |||
435 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); | ||
436 | addr2 = 0x51 + 4 * ap->port_no; | ||
437 | |||
438 | /* Fast interrupt prediction disable, hold off interrupt disable */ | ||
439 | pci_read_config_byte(pdev, addr2, &fast); | ||
440 | fast &= ~0x02; | ||
441 | fast |= 0x01; | ||
442 | pci_write_config_byte(pdev, addr2, fast); | ||
443 | |||
444 | mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; | ||
445 | |||
446 | pci_read_config_dword(pdev, addr1, ®); | ||
447 | mode = hpt37x_find_mode(ap, adev->dma_mode); | ||
448 | mode &= mask; | ||
449 | reg &= ~mask; | ||
450 | pci_write_config_dword(pdev, addr1, reg | mode); | ||
451 | } | 441 | } |
452 | 442 | ||
453 | /** | 443 | /** |
@@ -461,24 +451,25 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) | |||
461 | { | 451 | { |
462 | struct ata_port *ap = qc->ap; | 452 | struct ata_port *ap = qc->ap; |
463 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 453 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
464 | u8 dma_stat = ioread8(ap->ioaddr.bmdma_addr + 2); | ||
465 | u8 dma_cmd; | ||
466 | void __iomem *bmdma = ap->ioaddr.bmdma_addr; | 454 | void __iomem *bmdma = ap->ioaddr.bmdma_addr; |
455 | u8 dma_stat = ioread8(bmdma + ATA_DMA_STATUS); | ||
456 | u8 dma_cmd; | ||
467 | 457 | ||
468 | if (dma_stat & 0x01) { | 458 | if (dma_stat & ATA_DMA_ACTIVE) { |
469 | udelay(20); | 459 | udelay(20); |
470 | dma_stat = ioread8(bmdma + 2); | 460 | dma_stat = ioread8(bmdma + ATA_DMA_STATUS); |
471 | } | 461 | } |
472 | if (dma_stat & 0x01) { | 462 | if (dma_stat & ATA_DMA_ACTIVE) { |
473 | /* Clear the engine */ | 463 | /* Clear the engine */ |
474 | pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); | 464 | pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); |
475 | udelay(10); | 465 | udelay(10); |
476 | /* Stop DMA */ | 466 | /* Stop DMA */ |
477 | dma_cmd = ioread8(bmdma ); | 467 | dma_cmd = ioread8(bmdma + ATA_DMA_CMD); |
478 | iowrite8(dma_cmd & 0xFE, bmdma); | 468 | iowrite8(dma_cmd & ~ATA_DMA_START, bmdma + ATA_DMA_CMD); |
479 | /* Clear Error */ | 469 | /* Clear Error */ |
480 | dma_stat = ioread8(bmdma + 2); | 470 | dma_stat = ioread8(bmdma + ATA_DMA_STATUS); |
481 | iowrite8(dma_stat | 0x06 , bmdma + 2); | 471 | iowrite8(dma_stat | ATA_DMA_INTR | ATA_DMA_ERR, |
472 | bmdma + ATA_DMA_STATUS); | ||
482 | /* Clear the engine */ | 473 | /* Clear the engine */ |
483 | pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); | 474 | pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); |
484 | udelay(10); | 475 | udelay(10); |
@@ -486,20 +477,12 @@ static void hpt370_bmdma_stop(struct ata_queued_cmd *qc) | |||
486 | ata_bmdma_stop(qc); | 477 | ata_bmdma_stop(qc); |
487 | } | 478 | } |
488 | 479 | ||
489 | /** | 480 | static void hpt372_set_mode(struct ata_port *ap, struct ata_device *adev, |
490 | * hpt372_set_piomode - PIO setup | 481 | u8 mode) |
491 | * @ap: ATA interface | ||
492 | * @adev: device on the interface | ||
493 | * | ||
494 | * Perform PIO mode setup. | ||
495 | */ | ||
496 | |||
497 | static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) | ||
498 | { | 482 | { |
499 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 483 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
500 | u32 addr1, addr2; | 484 | u32 addr1, addr2; |
501 | u32 reg; | 485 | u32 reg, timing, mask; |
502 | u32 mode; | ||
503 | u8 fast; | 486 | u8 fast; |
504 | 487 | ||
505 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); | 488 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); |
@@ -510,13 +493,32 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
510 | fast &= ~0x07; | 493 | fast &= ~0x07; |
511 | pci_write_config_byte(pdev, addr2, fast); | 494 | pci_write_config_byte(pdev, addr2, fast); |
512 | 495 | ||
496 | /* Determine timing mask and find matching mode entry */ | ||
497 | if (mode < XFER_MW_DMA_0) | ||
498 | mask = 0xcfc3ffff; | ||
499 | else if (mode < XFER_UDMA_0) | ||
500 | mask = 0x31c001ff; | ||
501 | else | ||
502 | mask = 0x303c0000; | ||
503 | |||
504 | timing = hpt37x_find_mode(ap, mode); | ||
505 | |||
513 | pci_read_config_dword(pdev, addr1, ®); | 506 | pci_read_config_dword(pdev, addr1, ®); |
514 | mode = hpt37x_find_mode(ap, adev->pio_mode); | 507 | reg = (reg & ~mask) | (timing & mask); |
508 | pci_write_config_dword(pdev, addr1, reg); | ||
509 | } | ||
510 | |||
511 | /** | ||
512 | * hpt372_set_piomode - PIO setup | ||
513 | * @ap: ATA interface | ||
514 | * @adev: device on the interface | ||
515 | * | ||
516 | * Perform PIO mode setup. | ||
517 | */ | ||
515 | 518 | ||
516 | printk("Find mode for %d reports %X\n", adev->pio_mode, mode); | 519 | static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) |
517 | mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ | 520 | { |
518 | reg &= ~0xCFC3FFFF; /* Strip timing bits */ | 521 | hpt372_set_mode(ap, adev, adev->pio_mode); |
519 | pci_write_config_dword(pdev, addr1, reg | mode); | ||
520 | } | 522 | } |
521 | 523 | ||
522 | /** | 524 | /** |
@@ -524,33 +526,12 @@ static void hpt372_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
524 | * @ap: ATA interface | 526 | * @ap: ATA interface |
525 | * @adev: Device being configured | 527 | * @adev: Device being configured |
526 | * | 528 | * |
527 | * Set up the channel for MWDMA or UDMA modes. Much the same as with | 529 | * Set up the channel for MWDMA or UDMA modes. |
528 | * PIO, load the mode number and then set MWDMA or UDMA flag. | ||
529 | */ | 530 | */ |
530 | 531 | ||
531 | static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 532 | static void hpt372_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
532 | { | 533 | { |
533 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 534 | hpt372_set_mode(ap, adev, adev->dma_mode); |
534 | u32 addr1, addr2; | ||
535 | u32 reg, mode, mask; | ||
536 | u8 fast; | ||
537 | |||
538 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); | ||
539 | addr2 = 0x51 + 4 * ap->port_no; | ||
540 | |||
541 | /* Fast interrupt prediction disable, hold off interrupt disable */ | ||
542 | pci_read_config_byte(pdev, addr2, &fast); | ||
543 | fast &= ~0x07; | ||
544 | pci_write_config_byte(pdev, addr2, fast); | ||
545 | |||
546 | mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; | ||
547 | |||
548 | pci_read_config_dword(pdev, addr1, ®); | ||
549 | mode = hpt37x_find_mode(ap, adev->dma_mode); | ||
550 | printk("Find mode for DMA %d reports %X\n", adev->dma_mode, mode); | ||
551 | mode &= mask; | ||
552 | reg &= ~mask; | ||
553 | pci_write_config_dword(pdev, addr1, reg | mode); | ||
554 | } | 535 | } |
555 | 536 | ||
556 | /** | 537 | /** |
@@ -1006,7 +987,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
1006 | } | 987 | } |
1007 | 988 | ||
1008 | /* Now kick off ATA set up */ | 989 | /* Now kick off ATA set up */ |
1009 | return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data); | 990 | return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0); |
1010 | } | 991 | } |
1011 | 992 | ||
1012 | static const struct pci_device_id hpt37x[] = { | 993 | static const struct pci_device_id hpt37x[] = { |
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c index dd26bc73bd9a..01457b266f3d 100644 --- a/drivers/ata/pata_hpt3x2n.c +++ b/drivers/ata/pata_hpt3x2n.c | |||
@@ -25,7 +25,7 @@ | |||
25 | #include <linux/libata.h> | 25 | #include <linux/libata.h> |
26 | 26 | ||
27 | #define DRV_NAME "pata_hpt3x2n" | 27 | #define DRV_NAME "pata_hpt3x2n" |
28 | #define DRV_VERSION "0.3.8" | 28 | #define DRV_VERSION "0.3.10" |
29 | 29 | ||
30 | enum { | 30 | enum { |
31 | HPT_PCI_FAST = (1 << 31), | 31 | HPT_PCI_FAST = (1 << 31), |
@@ -45,25 +45,24 @@ struct hpt_chip { | |||
45 | 45 | ||
46 | /* key for bus clock timings | 46 | /* key for bus clock timings |
47 | * bit | 47 | * bit |
48 | * 0:3 data_high_time. inactive time of DIOW_/DIOR_ for PIO and MW | 48 | * 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA. |
49 | * DMA. cycles = value + 1 | 49 | * cycles = value + 1 |
50 | * 4:8 data_low_time. active time of DIOW_/DIOR_ for PIO and MW | 50 | * 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA. |
51 | * DMA. cycles = value + 1 | 51 | * cycles = value + 1 |
52 | * 9:12 cmd_high_time. inactive time of DIOW_/DIOR_ during task file | 52 | * 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file |
53 | * register access. | 53 | * register access. |
54 | * 13:17 cmd_low_time. active time of DIOW_/DIOR_ during task file | 54 | * 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file |
55 | * register access. | 55 | * register access. |
56 | * 18:21 udma_cycle_time. clock freq and clock cycles for UDMA xfer. | 56 | * 18:20 udma_cycle_time. Clock cycles for UDMA xfer. |
57 | * during task file register access. | 57 | * 21 CLK frequency for UDMA: 0=ATA clock, 1=dual ATA clock. |
58 | * 22:24 pre_high_time. time to initialize 1st cycle for PIO and MW DMA | 58 | * 22:24 pre_high_time. Time to initialize 1st cycle for PIO and MW DMA xfer. |
59 | * xfer. | 59 | * 25:27 cmd_pre_high_time. Time to initialize 1st PIO cycle for task file |
60 | * 25:27 cmd_pre_high_time. time to initialize 1st PIO cycle for task | ||
61 | * register access. | 60 | * register access. |
62 | * 28 UDMA enable | 61 | * 28 UDMA enable. |
63 | * 29 DMA enable | 62 | * 29 DMA enable. |
64 | * 30 PIO_MST enable. if set, the chip is in bus master mode during | 63 | * 30 PIO_MST enable. If set, the chip is in bus master mode during |
65 | * PIO. | 64 | * PIO xfer. |
66 | * 31 FIFO enable. | 65 | * 31 FIFO enable. Only for PIO. |
67 | */ | 66 | */ |
68 | 67 | ||
69 | /* 66MHz DPLL clocks */ | 68 | /* 66MHz DPLL clocks */ |
@@ -161,20 +160,12 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline) | |||
161 | return ata_sff_prereset(link, deadline); | 160 | return ata_sff_prereset(link, deadline); |
162 | } | 161 | } |
163 | 162 | ||
164 | /** | 163 | static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev, |
165 | * hpt3x2n_set_piomode - PIO setup | 164 | u8 mode) |
166 | * @ap: ATA interface | ||
167 | * @adev: device on the interface | ||
168 | * | ||
169 | * Perform PIO mode setup. | ||
170 | */ | ||
171 | |||
172 | static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) | ||
173 | { | 165 | { |
174 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 166 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
175 | u32 addr1, addr2; | 167 | u32 addr1, addr2; |
176 | u32 reg; | 168 | u32 reg, timing, mask; |
177 | u32 mode; | ||
178 | u8 fast; | 169 | u8 fast; |
179 | 170 | ||
180 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); | 171 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); |
@@ -185,11 +176,32 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
185 | fast &= ~0x07; | 176 | fast &= ~0x07; |
186 | pci_write_config_byte(pdev, addr2, fast); | 177 | pci_write_config_byte(pdev, addr2, fast); |
187 | 178 | ||
179 | /* Determine timing mask and find matching mode entry */ | ||
180 | if (mode < XFER_MW_DMA_0) | ||
181 | mask = 0xcfc3ffff; | ||
182 | else if (mode < XFER_UDMA_0) | ||
183 | mask = 0x31c001ff; | ||
184 | else | ||
185 | mask = 0x303c0000; | ||
186 | |||
187 | timing = hpt3x2n_find_mode(ap, mode); | ||
188 | |||
188 | pci_read_config_dword(pdev, addr1, ®); | 189 | pci_read_config_dword(pdev, addr1, ®); |
189 | mode = hpt3x2n_find_mode(ap, adev->pio_mode); | 190 | reg = (reg & ~mask) | (timing & mask); |
190 | mode &= 0xCFC3FFFF; /* Leave DMA bits alone */ | 191 | pci_write_config_dword(pdev, addr1, reg); |
191 | reg &= ~0xCFC3FFFF; /* Strip timing bits */ | 192 | } |
192 | pci_write_config_dword(pdev, addr1, reg | mode); | 193 | |
194 | /** | ||
195 | * hpt3x2n_set_piomode - PIO setup | ||
196 | * @ap: ATA interface | ||
197 | * @adev: device on the interface | ||
198 | * | ||
199 | * Perform PIO mode setup. | ||
200 | */ | ||
201 | |||
202 | static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) | ||
203 | { | ||
204 | hpt3x2n_set_mode(ap, adev, adev->pio_mode); | ||
193 | } | 205 | } |
194 | 206 | ||
195 | /** | 207 | /** |
@@ -197,32 +209,12 @@ static void hpt3x2n_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
197 | * @ap: ATA interface | 209 | * @ap: ATA interface |
198 | * @adev: Device being configured | 210 | * @adev: Device being configured |
199 | * | 211 | * |
200 | * Set up the channel for MWDMA or UDMA modes. Much the same as with | 212 | * Set up the channel for MWDMA or UDMA modes. |
201 | * PIO, load the mode number and then set MWDMA or UDMA flag. | ||
202 | */ | 213 | */ |
203 | 214 | ||
204 | static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 215 | static void hpt3x2n_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
205 | { | 216 | { |
206 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 217 | hpt3x2n_set_mode(ap, adev, adev->dma_mode); |
207 | u32 addr1, addr2; | ||
208 | u32 reg, mode, mask; | ||
209 | u8 fast; | ||
210 | |||
211 | addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no); | ||
212 | addr2 = 0x51 + 4 * ap->port_no; | ||
213 | |||
214 | /* Fast interrupt prediction disable, hold off interrupt disable */ | ||
215 | pci_read_config_byte(pdev, addr2, &fast); | ||
216 | fast &= ~0x07; | ||
217 | pci_write_config_byte(pdev, addr2, fast); | ||
218 | |||
219 | mask = adev->dma_mode < XFER_UDMA_0 ? 0x31C001FF : 0x303C0000; | ||
220 | |||
221 | pci_read_config_dword(pdev, addr1, ®); | ||
222 | mode = hpt3x2n_find_mode(ap, adev->dma_mode); | ||
223 | mode &= mask; | ||
224 | reg &= ~mask; | ||
225 | pci_write_config_dword(pdev, addr1, reg | mode); | ||
226 | } | 218 | } |
227 | 219 | ||
228 | /** | 220 | /** |
@@ -544,19 +536,19 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
544 | pci_mhz); | 536 | pci_mhz); |
545 | /* Set our private data up. We only need a few flags so we use | 537 | /* Set our private data up. We only need a few flags so we use |
546 | it directly */ | 538 | it directly */ |
547 | if (pci_mhz > 60) { | 539 | if (pci_mhz > 60) |
548 | hpriv = (void *)(PCI66 | USE_DPLL); | 540 | hpriv = (void *)(PCI66 | USE_DPLL); |
549 | /* | 541 | |
550 | * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in | 542 | /* |
551 | * the MISC. register to stretch the UltraDMA Tss timing. | 543 | * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in |
552 | * NOTE: This register is only writeable via I/O space. | 544 | * the MISC. register to stretch the UltraDMA Tss timing. |
553 | */ | 545 | * NOTE: This register is only writeable via I/O space. |
554 | if (dev->device == PCI_DEVICE_ID_TTI_HPT371) | 546 | */ |
555 | outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c); | 547 | if (dev->device == PCI_DEVICE_ID_TTI_HPT371) |
556 | } | 548 | outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c); |
557 | 549 | ||
558 | /* Now kick off ATA set up */ | 550 | /* Now kick off ATA set up */ |
559 | return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv); | 551 | return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0); |
560 | } | 552 | } |
561 | 553 | ||
562 | static const struct pci_device_id hpt3x2n[] = { | 554 | static const struct pci_device_id hpt3x2n[] = { |
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c index 8f3325adceb3..f971f0de88e6 100644 --- a/drivers/ata/pata_it8213.c +++ b/drivers/ata/pata_it8213.c | |||
@@ -273,7 +273,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en | |||
273 | dev_printk(KERN_DEBUG, &pdev->dev, | 273 | dev_printk(KERN_DEBUG, &pdev->dev, |
274 | "version " DRV_VERSION "\n"); | 274 | "version " DRV_VERSION "\n"); |
275 | 275 | ||
276 | return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL); | 276 | return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0); |
277 | } | 277 | } |
278 | 278 | ||
279 | static const struct pci_device_id it8213_pci_tbl[] = { | 279 | static const struct pci_device_id it8213_pci_tbl[] = { |
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index edc5c1fed150..9bde1cb5f981 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c | |||
@@ -932,7 +932,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
932 | else | 932 | else |
933 | ppi[0] = &info_smart; | 933 | ppi[0] = &info_smart; |
934 | } | 934 | } |
935 | return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL); | 935 | return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0); |
936 | } | 936 | } |
937 | 937 | ||
938 | #ifdef CONFIG_PM | 938 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c index 3a1474ac8838..565e01e6ac7c 100644 --- a/drivers/ata/pata_jmicron.c +++ b/drivers/ata/pata_jmicron.c | |||
@@ -144,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i | |||
144 | }; | 144 | }; |
145 | const struct ata_port_info *ppi[] = { &info, NULL }; | 145 | const struct ata_port_info *ppi[] = { &info, NULL }; |
146 | 146 | ||
147 | return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL); | 147 | return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0); |
148 | } | 148 | } |
149 | 149 | ||
150 | static const struct pci_device_id jmicron_pci_tbl[] = { | 150 | static const struct pci_device_id jmicron_pci_tbl[] = { |
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 950da39cae3d..e8ca02e5a71d 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c | |||
@@ -147,13 +147,13 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i | |||
147 | if (pdev->device == 0x6101) | 147 | if (pdev->device == 0x6101) |
148 | ppi[1] = &ata_dummy_port_info; | 148 | ppi[1] = &ata_dummy_port_info; |
149 | 149 | ||
150 | #if defined(CONFIG_AHCI) || defined(CONFIG_AHCI_MODULE) | 150 | #if defined(CONFIG_SATA_AHCI) || defined(CONFIG_SATA_AHCI_MODULE) |
151 | if (!marvell_pata_active(pdev)) { | 151 | if (!marvell_pata_active(pdev)) { |
152 | printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n"); | 152 | printk(KERN_INFO DRV_NAME ": PATA port not active, deferring to AHCI driver.\n"); |
153 | return -ENODEV; | 153 | return -ENODEV; |
154 | } | 154 | } |
155 | #endif | 155 | #endif |
156 | return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL); | 156 | return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0); |
157 | } | 157 | } |
158 | 158 | ||
159 | static const struct pci_device_id marvell_pci_tbl[] = { | 159 | static const struct pci_device_id marvell_pci_tbl[] = { |
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c index f0d52f72f5bb..94f979a7f4f7 100644 --- a/drivers/ata/pata_netcell.c +++ b/drivers/ata/pata_netcell.c | |||
@@ -82,7 +82,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e | |||
82 | ata_pci_bmdma_clear_simplex(pdev); | 82 | ata_pci_bmdma_clear_simplex(pdev); |
83 | 83 | ||
84 | /* And let the library code do the work */ | 84 | /* And let the library code do the work */ |
85 | return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL); | 85 | return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0); |
86 | } | 86 | } |
87 | 87 | ||
88 | static const struct pci_device_id netcell_pci_tbl[] = { | 88 | static const struct pci_device_id netcell_pci_tbl[] = { |
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c index ca53fac06717..2110863bb3db 100644 --- a/drivers/ata/pata_ns87410.c +++ b/drivers/ata/pata_ns87410.c | |||
@@ -148,7 +148,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
148 | .port_ops = &ns87410_port_ops | 148 | .port_ops = &ns87410_port_ops |
149 | }; | 149 | }; |
150 | const struct ata_port_info *ppi[] = { &info, NULL }; | 150 | const struct ata_port_info *ppi[] = { &info, NULL }; |
151 | return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL); | 151 | return ata_pci_sff_init_one(dev, ppi, &ns87410_sht, NULL, 0); |
152 | } | 152 | } |
153 | 153 | ||
154 | static const struct pci_device_id ns87410[] = { | 154 | static const struct pci_device_id ns87410[] = { |
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c index 061aa1c41a48..830431f036a1 100644 --- a/drivers/ata/pata_ns87415.c +++ b/drivers/ata/pata_ns87415.c | |||
@@ -380,7 +380,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e | |||
380 | 380 | ||
381 | ns87415_fixup(pdev); | 381 | ns87415_fixup(pdev); |
382 | 382 | ||
383 | return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL); | 383 | return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0); |
384 | } | 384 | } |
385 | 385 | ||
386 | static const struct pci_device_id ns87415_pci_tbl[] = { | 386 | static const struct pci_device_id ns87415_pci_tbl[] = { |
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c index 9a8687db6b2d..5f6aba7eb0dd 100644 --- a/drivers/ata/pata_oldpiix.c +++ b/drivers/ata/pata_oldpiix.c | |||
@@ -248,7 +248,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e | |||
248 | dev_printk(KERN_DEBUG, &pdev->dev, | 248 | dev_printk(KERN_DEBUG, &pdev->dev, |
249 | "version " DRV_VERSION "\n"); | 249 | "version " DRV_VERSION "\n"); |
250 | 250 | ||
251 | return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL); | 251 | return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0); |
252 | } | 252 | } |
253 | 253 | ||
254 | static const struct pci_device_id oldpiix_pci_tbl[] = { | 254 | static const struct pci_device_id oldpiix_pci_tbl[] = { |
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c index 99eddda2d2e5..00c5a02a94fc 100644 --- a/drivers/ata/pata_opti.c +++ b/drivers/ata/pata_opti.c | |||
@@ -172,7 +172,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
172 | if (!printed_version++) | 172 | if (!printed_version++) |
173 | dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); | 173 | dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); |
174 | 174 | ||
175 | return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL); | 175 | return ata_pci_sff_init_one(dev, ppi, &opti_sht, NULL, 0); |
176 | } | 176 | } |
177 | 177 | ||
178 | static const struct pci_device_id opti[] = { | 178 | static const struct pci_device_id opti[] = { |
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c index 86885a445f97..76b7d12b1e8d 100644 --- a/drivers/ata/pata_optidma.c +++ b/drivers/ata/pata_optidma.c | |||
@@ -429,7 +429,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
429 | if (optiplus_with_udma(dev)) | 429 | if (optiplus_with_udma(dev)) |
430 | ppi[0] = &info_82c700_udma; | 430 | ppi[0] = &info_82c700_udma; |
431 | 431 | ||
432 | return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL); | 432 | return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0); |
433 | } | 433 | } |
434 | 434 | ||
435 | static const struct pci_device_id optidma[] = { | 435 | static const struct pci_device_id optidma[] = { |
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 1b392c9e8531..36103531feeb 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c | |||
@@ -136,7 +136,7 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev, | |||
136 | * | 136 | * |
137 | */ | 137 | */ |
138 | 138 | ||
139 | void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) | 139 | static void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc) |
140 | { | 140 | { |
141 | int count; | 141 | int count; |
142 | struct ata_port *ap; | 142 | struct ata_port *ap; |
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c index 2f3c9bed63d9..9ac0897cf8b0 100644 --- a/drivers/ata/pata_pdc202xx_old.c +++ b/drivers/ata/pata_pdc202xx_old.c | |||
@@ -2,7 +2,7 @@ | |||
2 | * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer | 2 | * pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer |
3 | * (C) 2005 Red Hat Inc | 3 | * (C) 2005 Red Hat Inc |
4 | * Alan Cox <alan@lxorguk.ukuu.org.uk> | 4 | * Alan Cox <alan@lxorguk.ukuu.org.uk> |
5 | * (C) 2007,2009 Bartlomiej Zolnierkiewicz | 5 | * (C) 2007,2009,2010 Bartlomiej Zolnierkiewicz |
6 | * | 6 | * |
7 | * Based in part on linux/drivers/ide/pci/pdc202xx_old.c | 7 | * Based in part on linux/drivers/ide/pci/pdc202xx_old.c |
8 | * | 8 | * |
@@ -35,6 +35,15 @@ static int pdc2026x_cable_detect(struct ata_port *ap) | |||
35 | return ATA_CBL_PATA80; | 35 | return ATA_CBL_PATA80; |
36 | } | 36 | } |
37 | 37 | ||
38 | static void pdc202xx_exec_command(struct ata_port *ap, | ||
39 | const struct ata_taskfile *tf) | ||
40 | { | ||
41 | DPRINTK("ata%u: cmd 0x%X\n", ap->print_id, tf->command); | ||
42 | |||
43 | iowrite8(tf->command, ap->ioaddr.command_addr); | ||
44 | ndelay(400); | ||
45 | } | ||
46 | |||
38 | /** | 47 | /** |
39 | * pdc202xx_configure_piomode - set chip PIO timing | 48 | * pdc202xx_configure_piomode - set chip PIO timing |
40 | * @ap: ATA interface | 49 | * @ap: ATA interface |
@@ -271,6 +280,8 @@ static struct ata_port_operations pdc2024x_port_ops = { | |||
271 | .cable_detect = ata_cable_40wire, | 280 | .cable_detect = ata_cable_40wire, |
272 | .set_piomode = pdc202xx_set_piomode, | 281 | .set_piomode = pdc202xx_set_piomode, |
273 | .set_dmamode = pdc202xx_set_dmamode, | 282 | .set_dmamode = pdc202xx_set_dmamode, |
283 | |||
284 | .sff_exec_command = pdc202xx_exec_command, | ||
274 | }; | 285 | }; |
275 | 286 | ||
276 | static struct ata_port_operations pdc2026x_port_ops = { | 287 | static struct ata_port_operations pdc2026x_port_ops = { |
@@ -284,6 +295,8 @@ static struct ata_port_operations pdc2026x_port_ops = { | |||
284 | .dev_config = pdc2026x_dev_config, | 295 | .dev_config = pdc2026x_dev_config, |
285 | 296 | ||
286 | .port_start = pdc2026x_port_start, | 297 | .port_start = pdc2026x_port_start, |
298 | |||
299 | .sff_exec_command = pdc202xx_exec_command, | ||
287 | }; | 300 | }; |
288 | 301 | ||
289 | static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) | 302 | static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id) |
@@ -324,7 +337,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id | |||
324 | return -ENODEV; | 337 | return -ENODEV; |
325 | } | 338 | } |
326 | } | 339 | } |
327 | return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL); | 340 | return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0); |
328 | } | 341 | } |
329 | 342 | ||
330 | static const struct pci_device_id pdc202xx[] = { | 343 | static const struct pci_device_id pdc202xx[] = { |
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c index bfe0180f3efa..981615414849 100644 --- a/drivers/ata/pata_piccolo.c +++ b/drivers/ata/pata_piccolo.c | |||
@@ -95,7 +95,7 @@ static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id | |||
95 | }; | 95 | }; |
96 | const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; | 96 | const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info }; |
97 | /* Just one port for the moment */ | 97 | /* Just one port for the moment */ |
98 | return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL); | 98 | return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0); |
99 | } | 99 | } |
100 | 100 | ||
101 | static struct pci_device_id ata_tosh[] = { | 101 | static struct pci_device_id ata_tosh[] = { |
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c index 4fd25e737d9a..fc9602229acb 100644 --- a/drivers/ata/pata_radisys.c +++ b/drivers/ata/pata_radisys.c | |||
@@ -227,7 +227,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e | |||
227 | dev_printk(KERN_DEBUG, &pdev->dev, | 227 | dev_printk(KERN_DEBUG, &pdev->dev, |
228 | "version " DRV_VERSION "\n"); | 228 | "version " DRV_VERSION "\n"); |
229 | 229 | ||
230 | return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL); | 230 | return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0); |
231 | } | 231 | } |
232 | 232 | ||
233 | static const struct pci_device_id radisys_pci_tbl[] = { | 233 | static const struct pci_device_id radisys_pci_tbl[] = { |
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c index 2932998fc4c6..4a454a88aa9d 100644 --- a/drivers/ata/pata_rz1000.c +++ b/drivers/ata/pata_rz1000.c | |||
@@ -95,7 +95,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en | |||
95 | printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); | 95 | printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); |
96 | 96 | ||
97 | if (rz1000_fifo_disable(pdev) == 0) | 97 | if (rz1000_fifo_disable(pdev) == 0) |
98 | return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL); | 98 | return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0); |
99 | 99 | ||
100 | printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); | 100 | printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n"); |
101 | /* Not safe to use so skip */ | 101 | /* Not safe to use so skip */ |
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index 3bbed8322ecf..dfecc6f964b0 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c | |||
@@ -237,7 +237,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
237 | }; | 237 | }; |
238 | const struct ata_port_info *ppi[] = { &info, NULL }; | 238 | const struct ata_port_info *ppi[] = { &info, NULL }; |
239 | 239 | ||
240 | return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL); | 240 | return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0); |
241 | } | 241 | } |
242 | 242 | ||
243 | static const struct pci_device_id sc1200[] = { | 243 | static const struct pci_device_id sc1200[] = { |
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index beaed12d50e4..9524d54035f7 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c | |||
@@ -1,6 +1,7 @@ | |||
1 | /* | 1 | /* |
2 | * pata_serverworks.c - Serverworks PATA for new ATA layer | 2 | * pata_serverworks.c - Serverworks PATA for new ATA layer |
3 | * (C) 2005 Red Hat Inc | 3 | * (C) 2005 Red Hat Inc |
4 | * (C) 2010 Bartlomiej Zolnierkiewicz | ||
4 | * | 5 | * |
5 | * based upon | 6 | * based upon |
6 | * | 7 | * |
@@ -253,7 +254,7 @@ static void serverworks_set_piomode(struct ata_port *ap, struct ata_device *adev | |||
253 | if (serverworks_is_csb(pdev)) { | 254 | if (serverworks_is_csb(pdev)) { |
254 | pci_read_config_word(pdev, 0x4A, &csb5_pio); | 255 | pci_read_config_word(pdev, 0x4A, &csb5_pio); |
255 | csb5_pio &= ~(0x0F << devbits); | 256 | csb5_pio &= ~(0x0F << devbits); |
256 | pci_write_config_byte(pdev, 0x4A, csb5_pio | (pio << devbits)); | 257 | pci_write_config_word(pdev, 0x4A, csb5_pio | (pio << devbits)); |
257 | } | 258 | } |
258 | } | 259 | } |
259 | 260 | ||
@@ -327,7 +328,7 @@ static int serverworks_fixup_osb4(struct pci_dev *pdev) | |||
327 | pci_dev_put(isa_dev); | 328 | pci_dev_put(isa_dev); |
328 | return 0; | 329 | return 0; |
329 | } | 330 | } |
330 | printk(KERN_WARNING "ata_serverworks: Unable to find bridge.\n"); | 331 | printk(KERN_WARNING DRV_NAME ": Unable to find bridge.\n"); |
331 | return -ENODEV; | 332 | return -ENODEV; |
332 | } | 333 | } |
333 | 334 | ||
@@ -459,7 +460,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id | |||
459 | if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) | 460 | if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) |
460 | ata_pci_bmdma_clear_simplex(pdev); | 461 | ata_pci_bmdma_clear_simplex(pdev); |
461 | 462 | ||
462 | return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL); | 463 | return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0); |
463 | } | 464 | } |
464 | 465 | ||
465 | #ifdef CONFIG_PM | 466 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index a2ace48a4610..c6c589c23ffc 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c | |||
@@ -356,7 +356,7 @@ static int __devinit sil680_init_one(struct pci_dev *pdev, | |||
356 | IRQF_SHARED, &sil680_sht); | 356 | IRQF_SHARED, &sil680_sht); |
357 | 357 | ||
358 | use_ioports: | 358 | use_ioports: |
359 | return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL); | 359 | return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0); |
360 | } | 360 | } |
361 | 361 | ||
362 | #ifdef CONFIG_PM | 362 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 5c30d56dec84..b6708032f321 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c | |||
@@ -826,7 +826,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) | |||
826 | 826 | ||
827 | sis_fixup(pdev, chipset); | 827 | sis_fixup(pdev, chipset); |
828 | 828 | ||
829 | return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset); | 829 | return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0); |
830 | } | 830 | } |
831 | 831 | ||
832 | #ifdef CONFIG_PM | 832 | #ifdef CONFIG_PM |
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 29f733c32066..733b042a7469 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c | |||
@@ -316,7 +316,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id | |||
316 | val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; | 316 | val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; |
317 | pci_write_config_dword(dev, 0x40, val); | 317 | pci_write_config_dword(dev, 0x40, val); |
318 | 318 | ||
319 | return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL); | 319 | return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0); |
320 | } | 320 | } |
321 | 321 | ||
322 | static const struct pci_device_id sl82c105[] = { | 322 | static const struct pci_device_id sl82c105[] = { |
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c index f1f13ff222fd..48f50600ed2a 100644 --- a/drivers/ata/pata_triflex.c +++ b/drivers/ata/pata_triflex.c | |||
@@ -201,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id) | |||
201 | if (!printed_version++) | 201 | if (!printed_version++) |
202 | dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); | 202 | dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n"); |
203 | 203 | ||
204 | return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL); | 204 | return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0); |
205 | } | 205 | } |
206 | 206 | ||
207 | static const struct pci_device_id triflex[] = { | 207 | static const struct pci_device_id triflex[] = { |
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 0d97890af681..3059ec017de3 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c | |||
@@ -22,6 +22,7 @@ | |||
22 | * VIA VT8233c - UDMA100 | 22 | * VIA VT8233c - UDMA100 |
23 | * VIA VT8235 - UDMA133 | 23 | * VIA VT8235 - UDMA133 |
24 | * VIA VT8237 - UDMA133 | 24 | * VIA VT8237 - UDMA133 |
25 | * VIA VT8237A - UDMA133 | ||
25 | * VIA VT8237S - UDMA133 | 26 | * VIA VT8237S - UDMA133 |
26 | * VIA VT8251 - UDMA133 | 27 | * VIA VT8251 - UDMA133 |
27 | * | 28 | * |
@@ -64,26 +65,15 @@ | |||
64 | #define DRV_NAME "pata_via" | 65 | #define DRV_NAME "pata_via" |
65 | #define DRV_VERSION "0.3.4" | 66 | #define DRV_VERSION "0.3.4" |
66 | 67 | ||
67 | /* | ||
68 | * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx | ||
69 | * driver. | ||
70 | */ | ||
71 | |||
72 | enum { | 68 | enum { |
73 | VIA_UDMA = 0x007, | 69 | VIA_BAD_PREQ = 0x01, /* Crashes if PREQ# till DDACK# set */ |
74 | VIA_UDMA_NONE = 0x000, | 70 | VIA_BAD_CLK66 = 0x02, /* 66 MHz clock doesn't work correctly */ |
75 | VIA_UDMA_33 = 0x001, | 71 | VIA_SET_FIFO = 0x04, /* Needs to have FIFO split set */ |
76 | VIA_UDMA_66 = 0x002, | 72 | VIA_NO_UNMASK = 0x08, /* Doesn't work with IRQ unmasking on */ |
77 | VIA_UDMA_100 = 0x003, | 73 | VIA_BAD_ID = 0x10, /* Has wrong vendor ID (0x1107) */ |
78 | VIA_UDMA_133 = 0x004, | 74 | VIA_BAD_AST = 0x20, /* Don't touch Address Setup Timing */ |
79 | VIA_BAD_PREQ = 0x010, /* Crashes if PREQ# till DDACK# set */ | 75 | VIA_NO_ENABLES = 0x40, /* Has no enablebits */ |
80 | VIA_BAD_CLK66 = 0x020, /* 66 MHz clock doesn't work correctly */ | 76 | VIA_SATA_PATA = 0x80, /* SATA/PATA combined configuration */ |
81 | VIA_SET_FIFO = 0x040, /* Needs to have FIFO split set */ | ||
82 | VIA_NO_UNMASK = 0x080, /* Doesn't work with IRQ unmasking on */ | ||
83 | VIA_BAD_ID = 0x100, /* Has wrong vendor ID (0x1107) */ | ||
84 | VIA_BAD_AST = 0x200, /* Don't touch Address Setup Timing */ | ||
85 | VIA_NO_ENABLES = 0x400, /* Has no enablebits */ | ||
86 | VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ | ||
87 | }; | 77 | }; |
88 | 78 | ||
89 | enum { | 79 | enum { |
@@ -99,40 +89,37 @@ static const struct via_isa_bridge { | |||
99 | u16 id; | 89 | u16 id; |
100 | u8 rev_min; | 90 | u8 rev_min; |
101 | u8 rev_max; | 91 | u8 rev_max; |
102 | u16 flags; | 92 | u8 udma_mask; |
93 | u8 flags; | ||
103 | } via_isa_bridges[] = { | 94 | } via_isa_bridges[] = { |
104 | { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, | 95 | { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
105 | VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, | 96 | { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
106 | { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | | 97 | { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
107 | VIA_BAD_AST | VIA_SATA_PATA }, | 98 | { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
108 | { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, | 99 | { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
109 | VIA_UDMA_133 | VIA_BAD_AST }, | 100 | { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_SATA_PATA }, |
110 | { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 101 | { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, |
111 | { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 102 | { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, ATA_UDMA6, VIA_BAD_AST | VIA_NO_ENABLES }, |
112 | { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, | 103 | { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
113 | { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, | 104 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
114 | { "vt6415", PCI_DEVICE_ID_VIA_6415, 0x00, 0xff, VIA_UDMA_133 | VIA_BAD_AST | VIA_NO_ENABLES }, | 105 | { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
115 | { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 106 | { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
116 | { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 107 | { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, |
117 | { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 108 | { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, |
118 | { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, | 109 | { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, |
119 | { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 }, | 110 | { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, |
120 | { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 }, | 111 | { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, |
121 | { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 }, | 112 | { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, |
122 | { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 }, | 113 | { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, |
123 | { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 }, | 114 | { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, |
124 | { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, | 115 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, |
125 | { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 }, | 116 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, |
126 | { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 }, | 117 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, |
127 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO }, | 118 | { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, |
128 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ }, | 119 | { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, |
129 | { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO }, | 120 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, |
130 | { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO }, | 121 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, |
131 | { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, | 122 | { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, |
132 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, | ||
133 | { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, | ||
134 | { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, | ||
135 | VIA_UDMA_133 | VIA_BAD_AST }, | ||
136 | { NULL } | 123 | { NULL } |
137 | }; | 124 | }; |
138 | 125 | ||
@@ -191,10 +178,10 @@ static int via_cable_detect(struct ata_port *ap) { | |||
191 | return ATA_CBL_SATA; | 178 | return ATA_CBL_SATA; |
192 | 179 | ||
193 | /* Early chips are 40 wire */ | 180 | /* Early chips are 40 wire */ |
194 | if ((config->flags & VIA_UDMA) < VIA_UDMA_66) | 181 | if (config->udma_mask < ATA_UDMA4) |
195 | return ATA_CBL_PATA40; | 182 | return ATA_CBL_PATA40; |
196 | /* UDMA 66 chips have only drive side logic */ | 183 | /* UDMA 66 chips have only drive side logic */ |
197 | else if ((config->flags & VIA_UDMA) < VIA_UDMA_100) | 184 | else if (config->udma_mask < ATA_UDMA5) |
198 | return ATA_CBL_PATA_UNK; | 185 | return ATA_CBL_PATA_UNK; |
199 | /* UDMA 100 or later */ | 186 | /* UDMA 100 or later */ |
200 | pci_read_config_dword(pdev, 0x50, &ata66); | 187 | pci_read_config_dword(pdev, 0x50, &ata66); |
@@ -229,11 +216,10 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) | |||
229 | 216 | ||
230 | 217 | ||
231 | /** | 218 | /** |
232 | * via_do_set_mode - set initial PIO mode data | 219 | * via_do_set_mode - set transfer mode data |
233 | * @ap: ATA interface | 220 | * @ap: ATA interface |
234 | * @adev: ATA device | 221 | * @adev: ATA device |
235 | * @mode: ATA mode being programmed | 222 | * @mode: ATA mode being programmed |
236 | * @tdiv: Clocks per PCI clock | ||
237 | * @set_ast: Set to program address setup | 223 | * @set_ast: Set to program address setup |
238 | * @udma_type: UDMA mode/format of registers | 224 | * @udma_type: UDMA mode/format of registers |
239 | * | 225 | * |
@@ -244,17 +230,27 @@ static int via_pre_reset(struct ata_link *link, unsigned long deadline) | |||
244 | * on the two channels. | 230 | * on the two channels. |
245 | */ | 231 | */ |
246 | 232 | ||
247 | static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mode, int tdiv, int set_ast, int udma_type) | 233 | static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, |
234 | int mode, int set_ast, int udma_type) | ||
248 | { | 235 | { |
249 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 236 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
250 | struct ata_device *peer = ata_dev_pair(adev); | 237 | struct ata_device *peer = ata_dev_pair(adev); |
251 | struct ata_timing t, p; | 238 | struct ata_timing t, p; |
252 | static int via_clock = 33333; /* Bus clock in kHZ - ought to be tunable one day */ | 239 | static int via_clock = 33333; /* Bus clock in kHZ */ |
253 | unsigned long T = 1000000000 / via_clock; | 240 | unsigned long T = 1000000000 / via_clock; |
254 | unsigned long UT = T/tdiv; | 241 | unsigned long UT = T; |
255 | int ut; | 242 | int ut; |
256 | int offset = 3 - (2*ap->port_no) - adev->devno; | 243 | int offset = 3 - (2*ap->port_no) - adev->devno; |
257 | 244 | ||
245 | switch (udma_type) { | ||
246 | case ATA_UDMA4: | ||
247 | UT = T / 2; break; | ||
248 | case ATA_UDMA5: | ||
249 | UT = T / 3; break; | ||
250 | case ATA_UDMA6: | ||
251 | UT = T / 4; break; | ||
252 | } | ||
253 | |||
258 | /* Calculate the timing values we require */ | 254 | /* Calculate the timing values we require */ |
259 | ata_timing_compute(adev, mode, &t, T, UT); | 255 | ata_timing_compute(adev, mode, &t, T, UT); |
260 | 256 | ||
@@ -273,7 +269,7 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo | |||
273 | 269 | ||
274 | pci_read_config_byte(pdev, 0x4C, &setup); | 270 | pci_read_config_byte(pdev, 0x4C, &setup); |
275 | setup &= ~(3 << shift); | 271 | setup &= ~(3 << shift); |
276 | setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */ | 272 | setup |= (clamp_val(t.setup, 1, 4) - 1) << shift; |
277 | pci_write_config_byte(pdev, 0x4C, setup); | 273 | pci_write_config_byte(pdev, 0x4C, setup); |
278 | } | 274 | } |
279 | 275 | ||
@@ -284,22 +280,20 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo | |||
284 | ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); | 280 | ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1)); |
285 | 281 | ||
286 | /* Load the UDMA bits according to type */ | 282 | /* Load the UDMA bits according to type */ |
287 | switch(udma_type) { | 283 | switch (udma_type) { |
288 | default: | 284 | case ATA_UDMA2: |
289 | /* BUG() ? */ | 285 | default: |
290 | /* fall through */ | 286 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; |
291 | case 33: | 287 | break; |
292 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03; | 288 | case ATA_UDMA4: |
293 | break; | 289 | ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; |
294 | case 66: | 290 | break; |
295 | ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f; | 291 | case ATA_UDMA5: |
296 | break; | 292 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; |
297 | case 100: | 293 | break; |
298 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; | 294 | case ATA_UDMA6: |
299 | break; | 295 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; |
300 | case 133: | 296 | break; |
301 | ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07; | ||
302 | break; | ||
303 | } | 297 | } |
304 | 298 | ||
305 | /* Set UDMA unless device is not UDMA capable */ | 299 | /* Set UDMA unless device is not UDMA capable */ |
@@ -325,22 +319,16 @@ static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) | |||
325 | { | 319 | { |
326 | const struct via_isa_bridge *config = ap->host->private_data; | 320 | const struct via_isa_bridge *config = ap->host->private_data; |
327 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; | 321 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; |
328 | int mode = config->flags & VIA_UDMA; | ||
329 | static u8 tclock[5] = { 1, 1, 2, 3, 4 }; | ||
330 | static u8 udma[5] = { 0, 33, 66, 100, 133 }; | ||
331 | 322 | ||
332 | via_do_set_mode(ap, adev, adev->pio_mode, tclock[mode], set_ast, udma[mode]); | 323 | via_do_set_mode(ap, adev, adev->pio_mode, set_ast, config->udma_mask); |
333 | } | 324 | } |
334 | 325 | ||
335 | static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) | 326 | static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) |
336 | { | 327 | { |
337 | const struct via_isa_bridge *config = ap->host->private_data; | 328 | const struct via_isa_bridge *config = ap->host->private_data; |
338 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; | 329 | int set_ast = (config->flags & VIA_BAD_AST) ? 0 : 1; |
339 | int mode = config->flags & VIA_UDMA; | ||
340 | static u8 tclock[5] = { 1, 1, 2, 3, 4 }; | ||
341 | static u8 udma[5] = { 0, 33, 66, 100, 133 }; | ||
342 | 330 | ||
343 | via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]); | 331 | via_do_set_mode(ap, adev, adev->dma_mode, set_ast, config->udma_mask); |
344 | } | 332 | } |
345 | 333 | ||
346 | /** | 334 | /** |
@@ -604,33 +592,29 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
604 | via_config_fifo(pdev, config->flags); | 592 | via_config_fifo(pdev, config->flags); |
605 | 593 | ||
606 | /* Clock set up */ | 594 | /* Clock set up */ |
607 | switch(config->flags & VIA_UDMA) { | 595 | switch (config->udma_mask) { |
608 | case VIA_UDMA_NONE: | 596 | case 0x00: |
609 | if (config->flags & VIA_NO_UNMASK) | 597 | if (config->flags & VIA_NO_UNMASK) |
610 | ppi[0] = &via_mwdma_info_borked; | 598 | ppi[0] = &via_mwdma_info_borked; |
611 | else | 599 | else |
612 | ppi[0] = &via_mwdma_info; | 600 | ppi[0] = &via_mwdma_info; |
613 | break; | 601 | break; |
614 | case VIA_UDMA_33: | 602 | case ATA_UDMA2: |
615 | ppi[0] = &via_udma33_info; | 603 | ppi[0] = &via_udma33_info; |
616 | break; | 604 | break; |
617 | case VIA_UDMA_66: | 605 | case ATA_UDMA4: |
618 | ppi[0] = &via_udma66_info; | 606 | ppi[0] = &via_udma66_info; |
619 | /* The 66 MHz devices require we enable the clock */ | 607 | break; |
620 | pci_read_config_dword(pdev, 0x50, &timing); | 608 | case ATA_UDMA5: |
621 | timing |= 0x80008; | 609 | ppi[0] = &via_udma100_info; |
622 | pci_write_config_dword(pdev, 0x50, timing); | 610 | break; |
623 | break; | 611 | case ATA_UDMA6: |
624 | case VIA_UDMA_100: | 612 | ppi[0] = &via_udma133_info; |
625 | ppi[0] = &via_udma100_info; | 613 | break; |
626 | break; | 614 | default: |
627 | case VIA_UDMA_133: | 615 | WARN_ON(1); |
628 | ppi[0] = &via_udma133_info; | 616 | return -ENODEV; |
629 | break; | 617 | } |
630 | default: | ||
631 | WARN_ON(1); | ||
632 | return -ENODEV; | ||
633 | } | ||
634 | 618 | ||
635 | if (config->flags & VIA_BAD_CLK66) { | 619 | if (config->flags & VIA_BAD_CLK66) { |
636 | /* Disable the 66MHz clock on problem devices */ | 620 | /* Disable the 66MHz clock on problem devices */ |
@@ -640,7 +624,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
640 | } | 624 | } |
641 | 625 | ||
642 | /* We have established the device type, now fire it up */ | 626 | /* We have established the device type, now fire it up */ |
643 | return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config); | 627 | return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0); |
644 | } | 628 | } |
645 | 629 | ||
646 | #ifdef CONFIG_PM | 630 | #ifdef CONFIG_PM |
@@ -667,7 +651,7 @@ static int via_reinit_one(struct pci_dev *pdev) | |||
667 | 651 | ||
668 | via_config_fifo(pdev, config->flags); | 652 | via_config_fifo(pdev, config->flags); |
669 | 653 | ||
670 | if ((config->flags & VIA_UDMA) == VIA_UDMA_66) { | 654 | if (config->udma_mask == ATA_UDMA4) { |
671 | /* The 66 MHz devices require we enable the clock */ | 655 | /* The 66 MHz devices require we enable the clock */ |
672 | pci_read_config_dword(pdev, 0x50, &timing); | 656 | pci_read_config_dword(pdev, 0x50, &timing); |
673 | timing |= 0x80008; | 657 | timing |= 0x80008; |
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 02efd9a83d26..08f65492cc81 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c | |||
@@ -40,11 +40,13 @@ | |||
40 | #include <linux/blkdev.h> | 40 | #include <linux/blkdev.h> |
41 | #include <linux/delay.h> | 41 | #include <linux/delay.h> |
42 | #include <linux/device.h> | 42 | #include <linux/device.h> |
43 | #include <scsi/scsi.h> | ||
44 | #include <scsi/scsi_cmnd.h> | ||
43 | #include <scsi/scsi_host.h> | 45 | #include <scsi/scsi_host.h> |
44 | #include <linux/libata.h> | 46 | #include <linux/libata.h> |
45 | 47 | ||
46 | #define DRV_NAME "sata_via" | 48 | #define DRV_NAME "sata_via" |
47 | #define DRV_VERSION "2.4" | 49 | #define DRV_VERSION "2.6" |
48 | 50 | ||
49 | /* | 51 | /* |
50 | * vt8251 is different from other sata controllers of VIA. It has two | 52 | * vt8251 is different from other sata controllers of VIA. It has two |
@@ -80,6 +82,7 @@ static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val); | |||
80 | static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); | 82 | static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); |
81 | static void svia_noop_freeze(struct ata_port *ap); | 83 | static void svia_noop_freeze(struct ata_port *ap); |
82 | static int vt6420_prereset(struct ata_link *link, unsigned long deadline); | 84 | static int vt6420_prereset(struct ata_link *link, unsigned long deadline); |
85 | static void vt6420_bmdma_start(struct ata_queued_cmd *qc); | ||
83 | static int vt6421_pata_cable_detect(struct ata_port *ap); | 86 | static int vt6421_pata_cable_detect(struct ata_port *ap); |
84 | static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); | 87 | static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev); |
85 | static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); | 88 | static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev); |
@@ -121,6 +124,7 @@ static struct ata_port_operations vt6420_sata_ops = { | |||
121 | .inherits = &svia_base_ops, | 124 | .inherits = &svia_base_ops, |
122 | .freeze = svia_noop_freeze, | 125 | .freeze = svia_noop_freeze, |
123 | .prereset = vt6420_prereset, | 126 | .prereset = vt6420_prereset, |
127 | .bmdma_start = vt6420_bmdma_start, | ||
124 | }; | 128 | }; |
125 | 129 | ||
126 | static struct ata_port_operations vt6421_pata_ops = { | 130 | static struct ata_port_operations vt6421_pata_ops = { |
@@ -377,6 +381,17 @@ static int vt6420_prereset(struct ata_link *link, unsigned long deadline) | |||
377 | return 0; | 381 | return 0; |
378 | } | 382 | } |
379 | 383 | ||
384 | static void vt6420_bmdma_start(struct ata_queued_cmd *qc) | ||
385 | { | ||
386 | struct ata_port *ap = qc->ap; | ||
387 | if ((qc->tf.command == ATA_CMD_PACKET) && | ||
388 | (qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) { | ||
389 | /* Prevents corruption on some ATAPI burners */ | ||
390 | ata_sff_pause(ap); | ||
391 | } | ||
392 | ata_bmdma_start(qc); | ||
393 | } | ||
394 | |||
380 | static int vt6421_pata_cable_detect(struct ata_port *ap) | 395 | static int vt6421_pata_cable_detect(struct ata_port *ap) |
381 | { | 396 | { |
382 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 397 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
@@ -392,14 +407,16 @@ static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev) | |||
392 | { | 407 | { |
393 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 408 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
394 | static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; | 409 | static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 }; |
395 | pci_write_config_byte(pdev, PATA_PIO_TIMING, pio_bits[adev->pio_mode - XFER_PIO_0]); | 410 | pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno, |
411 | pio_bits[adev->pio_mode - XFER_PIO_0]); | ||
396 | } | 412 | } |
397 | 413 | ||
398 | static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) | 414 | static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) |
399 | { | 415 | { |
400 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); | 416 | struct pci_dev *pdev = to_pci_dev(ap->host->dev); |
401 | static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; | 417 | static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; |
402 | pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]); | 418 | pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno, |
419 | udma_bits[adev->dma_mode - XFER_UDMA_0]); | ||
403 | } | 420 | } |
404 | 421 | ||
405 | static const unsigned int svia_bar_sizes[] = { | 422 | static const unsigned int svia_bar_sizes[] = { |
diff --git a/drivers/staging/phison/phison.c b/drivers/staging/phison/phison.c index 3817d7497049..fcba78d21636 100644 --- a/drivers/staging/phison/phison.c +++ b/drivers/staging/phison/phison.c | |||
@@ -62,7 +62,7 @@ static int phison_init_one(struct pci_dev *pdev, const struct pci_device_id *id) | |||
62 | }; | 62 | }; |
63 | const struct ata_port_info *ppi[] = { &info, NULL }; | 63 | const struct ata_port_info *ppi[] = { &info, NULL }; |
64 | 64 | ||
65 | ret = ata_pci_sff_init_one(pdev, ppi, &phison_sht, NULL); | 65 | ret = ata_pci_sff_init_one(pdev, ppi, &phison_sht, NULL, 0); |
66 | 66 | ||
67 | dev_dbg(&pdev->dev, "phison_init_one(), ret = %x\n", ret); | 67 | dev_dbg(&pdev->dev, "phison_init_one(), ret = %x\n", ret); |
68 | 68 | ||
diff --git a/include/linux/ata.h b/include/linux/ata.h index 20f31567ccee..b4c85e2adef5 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h | |||
@@ -841,7 +841,8 @@ static inline int ata_id_current_chs_valid(const u16 *id) | |||
841 | 841 | ||
842 | static inline int ata_id_is_cfa(const u16 *id) | 842 | static inline int ata_id_is_cfa(const u16 *id) |
843 | { | 843 | { |
844 | if (id[ATA_ID_CONFIG] == 0x848A) /* Traditional CF */ | 844 | if ((id[ATA_ID_CONFIG] == 0x848A) || /* Traditional CF */ |
845 | (id[ATA_ID_CONFIG] == 0x844A)) /* Delkin Devices CF */ | ||
845 | return 1; | 846 | return 1; |
846 | /* | 847 | /* |
847 | * CF specs don't require specific value in the word 0 anymore and yet | 848 | * CF specs don't require specific value in the word 0 anymore and yet |
diff --git a/include/linux/libata.h b/include/linux/libata.h index 73112250862c..f8ea71e6d0e2 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h | |||
@@ -857,6 +857,7 @@ struct ata_port_operations { | |||
857 | unsigned int (*sff_data_xfer)(struct ata_device *dev, | 857 | unsigned int (*sff_data_xfer)(struct ata_device *dev, |
858 | unsigned char *buf, unsigned int buflen, int rw); | 858 | unsigned char *buf, unsigned int buflen, int rw); |
859 | u8 (*sff_irq_on)(struct ata_port *); | 859 | u8 (*sff_irq_on)(struct ata_port *); |
860 | bool (*sff_irq_check)(struct ata_port *); | ||
860 | void (*sff_irq_clear)(struct ata_port *); | 861 | void (*sff_irq_clear)(struct ata_port *); |
861 | 862 | ||
862 | void (*bmdma_setup)(struct ata_queued_cmd *qc); | 863 | void (*bmdma_setup)(struct ata_queued_cmd *qc); |
@@ -1642,8 +1643,8 @@ extern int ata_pci_sff_activate_host(struct ata_host *host, | |||
1642 | irq_handler_t irq_handler, | 1643 | irq_handler_t irq_handler, |
1643 | struct scsi_host_template *sht); | 1644 | struct scsi_host_template *sht); |
1644 | extern int ata_pci_sff_init_one(struct pci_dev *pdev, | 1645 | extern int ata_pci_sff_init_one(struct pci_dev *pdev, |
1645 | const struct ata_port_info * const * ppi, | 1646 | const struct ata_port_info * const * ppi, |
1646 | struct scsi_host_template *sht, void *host_priv); | 1647 | struct scsi_host_template *sht, void *host_priv, int hflags); |
1647 | #endif /* CONFIG_PCI */ | 1648 | #endif /* CONFIG_PCI */ |
1648 | 1649 | ||
1649 | /** | 1650 | /** |