aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/igb/e1000_82575.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/igb/e1000_82575.c')
-rw-r--r--drivers/net/igb/e1000_82575.c2084
1 files changed, 2084 insertions, 0 deletions
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
new file mode 100644
index 00000000000..c0857bdfb03
--- /dev/null
+++ b/drivers/net/igb/e1000_82575.c
@@ -0,0 +1,2084 @@
1/*******************************************************************************
2
3 Intel(R) Gigabit Ethernet Linux driver
4 Copyright(c) 2007-2011 Intel Corporation.
5
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
9
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 more details.
14
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
18
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
21
22 Contact Information:
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25
26*******************************************************************************/
27
28/* e1000_82575
29 * e1000_82576
30 */
31
32#include <linux/types.h>
33#include <linux/if_ether.h>
34
35#include "e1000_mac.h"
36#include "e1000_82575.h"
37
38static s32 igb_get_invariants_82575(struct e1000_hw *);
39static s32 igb_acquire_phy_82575(struct e1000_hw *);
40static void igb_release_phy_82575(struct e1000_hw *);
41static s32 igb_acquire_nvm_82575(struct e1000_hw *);
42static void igb_release_nvm_82575(struct e1000_hw *);
43static s32 igb_check_for_link_82575(struct e1000_hw *);
44static s32 igb_get_cfg_done_82575(struct e1000_hw *);
45static s32 igb_init_hw_82575(struct e1000_hw *);
46static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
47static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
48static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
49static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
50static s32 igb_reset_hw_82575(struct e1000_hw *);
51static s32 igb_reset_hw_82580(struct e1000_hw *);
52static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
53static s32 igb_setup_copper_link_82575(struct e1000_hw *);
54static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
55static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
56static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
57static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
58static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
59 u16 *);
60static s32 igb_get_phy_id_82575(struct e1000_hw *);
61static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
62static bool igb_sgmii_active_82575(struct e1000_hw *);
63static s32 igb_reset_init_script_82575(struct e1000_hw *);
64static s32 igb_read_mac_addr_82575(struct e1000_hw *);
65static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
66static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw);
67static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
68static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw);
69static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw,
70 u16 offset);
71static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
72 u16 offset);
73static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
74static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
75static const u16 e1000_82580_rxpbs_table[] =
76 { 36, 72, 144, 1, 2, 4, 8, 16,
77 35, 70, 140 };
78#define E1000_82580_RXPBS_TABLE_SIZE \
79 (sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
80
81/**
82 * igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
83 * @hw: pointer to the HW structure
84 *
85 * Called to determine if the I2C pins are being used for I2C or as an
86 * external MDIO interface since the two options are mutually exclusive.
87 **/
88static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
89{
90 u32 reg = 0;
91 bool ext_mdio = false;
92
93 switch (hw->mac.type) {
94 case e1000_82575:
95 case e1000_82576:
96 reg = rd32(E1000_MDIC);
97 ext_mdio = !!(reg & E1000_MDIC_DEST);
98 break;
99 case e1000_82580:
100 case e1000_i350:
101 reg = rd32(E1000_MDICNFG);
102 ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
103 break;
104 default:
105 break;
106 }
107 return ext_mdio;
108}
109
110static s32 igb_get_invariants_82575(struct e1000_hw *hw)
111{
112 struct e1000_phy_info *phy = &hw->phy;
113 struct e1000_nvm_info *nvm = &hw->nvm;
114 struct e1000_mac_info *mac = &hw->mac;
115 struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
116 u32 eecd;
117 s32 ret_val;
118 u16 size;
119 u32 ctrl_ext = 0;
120
121 switch (hw->device_id) {
122 case E1000_DEV_ID_82575EB_COPPER:
123 case E1000_DEV_ID_82575EB_FIBER_SERDES:
124 case E1000_DEV_ID_82575GB_QUAD_COPPER:
125 mac->type = e1000_82575;
126 break;
127 case E1000_DEV_ID_82576:
128 case E1000_DEV_ID_82576_NS:
129 case E1000_DEV_ID_82576_NS_SERDES:
130 case E1000_DEV_ID_82576_FIBER:
131 case E1000_DEV_ID_82576_SERDES:
132 case E1000_DEV_ID_82576_QUAD_COPPER:
133 case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
134 case E1000_DEV_ID_82576_SERDES_QUAD:
135 mac->type = e1000_82576;
136 break;
137 case E1000_DEV_ID_82580_COPPER:
138 case E1000_DEV_ID_82580_FIBER:
139 case E1000_DEV_ID_82580_QUAD_FIBER:
140 case E1000_DEV_ID_82580_SERDES:
141 case E1000_DEV_ID_82580_SGMII:
142 case E1000_DEV_ID_82580_COPPER_DUAL:
143 case E1000_DEV_ID_DH89XXCC_SGMII:
144 case E1000_DEV_ID_DH89XXCC_SERDES:
145 case E1000_DEV_ID_DH89XXCC_BACKPLANE:
146 case E1000_DEV_ID_DH89XXCC_SFP:
147 mac->type = e1000_82580;
148 break;
149 case E1000_DEV_ID_I350_COPPER:
150 case E1000_DEV_ID_I350_FIBER:
151 case E1000_DEV_ID_I350_SERDES:
152 case E1000_DEV_ID_I350_SGMII:
153 mac->type = e1000_i350;
154 break;
155 default:
156 return -E1000_ERR_MAC_INIT;
157 break;
158 }
159
160 /* Set media type */
161 /*
162 * The 82575 uses bits 22:23 for link mode. The mode can be changed
163 * based on the EEPROM. We cannot rely upon device ID. There
164 * is no distinguishable difference between fiber and internal
165 * SerDes mode on the 82575. There can be an external PHY attached
166 * on the SGMII interface. For this, we'll set sgmii_active to true.
167 */
168 phy->media_type = e1000_media_type_copper;
169 dev_spec->sgmii_active = false;
170
171 ctrl_ext = rd32(E1000_CTRL_EXT);
172 switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
173 case E1000_CTRL_EXT_LINK_MODE_SGMII:
174 dev_spec->sgmii_active = true;
175 break;
176 case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
177 case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
178 hw->phy.media_type = e1000_media_type_internal_serdes;
179 break;
180 default:
181 break;
182 }
183
184 /* Set mta register count */
185 mac->mta_reg_count = 128;
186 /* Set rar entry count */
187 mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
188 if (mac->type == e1000_82576)
189 mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
190 if (mac->type == e1000_82580)
191 mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
192 if (mac->type == e1000_i350)
193 mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
194 /* reset */
195 if (mac->type >= e1000_82580)
196 mac->ops.reset_hw = igb_reset_hw_82580;
197 else
198 mac->ops.reset_hw = igb_reset_hw_82575;
199 /* Set if part includes ASF firmware */
200 mac->asf_firmware_present = true;
201 /* Set if manageability features are enabled. */
202 mac->arc_subsystem_valid =
203 (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
204 ? true : false;
205 /* enable EEE on i350 parts */
206 if (mac->type == e1000_i350)
207 dev_spec->eee_disable = false;
208 else
209 dev_spec->eee_disable = true;
210 /* physical interface link setup */
211 mac->ops.setup_physical_interface =
212 (hw->phy.media_type == e1000_media_type_copper)
213 ? igb_setup_copper_link_82575
214 : igb_setup_serdes_link_82575;
215
216 /* NVM initialization */
217 eecd = rd32(E1000_EECD);
218
219 nvm->opcode_bits = 8;
220 nvm->delay_usec = 1;
221 switch (nvm->override) {
222 case e1000_nvm_override_spi_large:
223 nvm->page_size = 32;
224 nvm->address_bits = 16;
225 break;
226 case e1000_nvm_override_spi_small:
227 nvm->page_size = 8;
228 nvm->address_bits = 8;
229 break;
230 default:
231 nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
232 nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
233 break;
234 }
235
236 nvm->type = e1000_nvm_eeprom_spi;
237
238 size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
239 E1000_EECD_SIZE_EX_SHIFT);
240
241 /*
242 * Added to a constant, "size" becomes the left-shift value
243 * for setting word_size.
244 */
245 size += NVM_WORD_SIZE_BASE_SHIFT;
246
247 /*
248 * Check for invalid size
249 */
250 if ((hw->mac.type == e1000_82576) && (size > 15)) {
251 printk("igb: The NVM size is not valid, "
252 "defaulting to 32K.\n");
253 size = 15;
254 }
255 nvm->word_size = 1 << size;
256 if (nvm->word_size == (1 << 15))
257 nvm->page_size = 128;
258
259 /* NVM Function Pointers */
260 nvm->ops.acquire = igb_acquire_nvm_82575;
261 if (nvm->word_size < (1 << 15))
262 nvm->ops.read = igb_read_nvm_eerd;
263 else
264 nvm->ops.read = igb_read_nvm_spi;
265
266 nvm->ops.release = igb_release_nvm_82575;
267 switch (hw->mac.type) {
268 case e1000_82580:
269 nvm->ops.validate = igb_validate_nvm_checksum_82580;
270 nvm->ops.update = igb_update_nvm_checksum_82580;
271 break;
272 case e1000_i350:
273 nvm->ops.validate = igb_validate_nvm_checksum_i350;
274 nvm->ops.update = igb_update_nvm_checksum_i350;
275 break;
276 default:
277 nvm->ops.validate = igb_validate_nvm_checksum;
278 nvm->ops.update = igb_update_nvm_checksum;
279 }
280 nvm->ops.write = igb_write_nvm_spi;
281
282 /* if part supports SR-IOV then initialize mailbox parameters */
283 switch (mac->type) {
284 case e1000_82576:
285 case e1000_i350:
286 igb_init_mbx_params_pf(hw);
287 break;
288 default:
289 break;
290 }
291
292 /* setup PHY parameters */
293 if (phy->media_type != e1000_media_type_copper) {
294 phy->type = e1000_phy_none;
295 return 0;
296 }
297
298 phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
299 phy->reset_delay_us = 100;
300
301 ctrl_ext = rd32(E1000_CTRL_EXT);
302
303 /* PHY function pointers */
304 if (igb_sgmii_active_82575(hw)) {
305 phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
306 ctrl_ext |= E1000_CTRL_I2C_ENA;
307 } else {
308 phy->ops.reset = igb_phy_hw_reset;
309 ctrl_ext &= ~E1000_CTRL_I2C_ENA;
310 }
311
312 wr32(E1000_CTRL_EXT, ctrl_ext);
313 igb_reset_mdicnfg_82580(hw);
314
315 if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
316 phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
317 phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
318 } else if (hw->mac.type >= e1000_82580) {
319 phy->ops.read_reg = igb_read_phy_reg_82580;
320 phy->ops.write_reg = igb_write_phy_reg_82580;
321 } else {
322 phy->ops.read_reg = igb_read_phy_reg_igp;
323 phy->ops.write_reg = igb_write_phy_reg_igp;
324 }
325
326 /* set lan id */
327 hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
328 E1000_STATUS_FUNC_SHIFT;
329
330 /* Set phy->phy_addr and phy->id. */
331 ret_val = igb_get_phy_id_82575(hw);
332 if (ret_val)
333 return ret_val;
334
335 /* Verify phy id and set remaining function pointers */
336 switch (phy->id) {
337 case I347AT4_E_PHY_ID:
338 case M88E1112_E_PHY_ID:
339 case M88E1111_I_PHY_ID:
340 phy->type = e1000_phy_m88;
341 phy->ops.get_phy_info = igb_get_phy_info_m88;
342
343 if (phy->id == I347AT4_E_PHY_ID ||
344 phy->id == M88E1112_E_PHY_ID)
345 phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
346 else
347 phy->ops.get_cable_length = igb_get_cable_length_m88;
348
349 phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
350 break;
351 case IGP03E1000_E_PHY_ID:
352 phy->type = e1000_phy_igp_3;
353 phy->ops.get_phy_info = igb_get_phy_info_igp;
354 phy->ops.get_cable_length = igb_get_cable_length_igp_2;
355 phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
356 phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
357 phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
358 break;
359 case I82580_I_PHY_ID:
360 case I350_I_PHY_ID:
361 phy->type = e1000_phy_82580;
362 phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
363 phy->ops.get_cable_length = igb_get_cable_length_82580;
364 phy->ops.get_phy_info = igb_get_phy_info_82580;
365 break;
366 default:
367 return -E1000_ERR_PHY;
368 }
369
370 return 0;
371}
372
373/**
374 * igb_acquire_phy_82575 - Acquire rights to access PHY
375 * @hw: pointer to the HW structure
376 *
377 * Acquire access rights to the correct PHY. This is a
378 * function pointer entry point called by the api module.
379 **/
380static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
381{
382 u16 mask = E1000_SWFW_PHY0_SM;
383
384 if (hw->bus.func == E1000_FUNC_1)
385 mask = E1000_SWFW_PHY1_SM;
386 else if (hw->bus.func == E1000_FUNC_2)
387 mask = E1000_SWFW_PHY2_SM;
388 else if (hw->bus.func == E1000_FUNC_3)
389 mask = E1000_SWFW_PHY3_SM;
390
391 return igb_acquire_swfw_sync_82575(hw, mask);
392}
393
394/**
395 * igb_release_phy_82575 - Release rights to access PHY
396 * @hw: pointer to the HW structure
397 *
398 * A wrapper to release access rights to the correct PHY. This is a
399 * function pointer entry point called by the api module.
400 **/
401static void igb_release_phy_82575(struct e1000_hw *hw)
402{
403 u16 mask = E1000_SWFW_PHY0_SM;
404
405 if (hw->bus.func == E1000_FUNC_1)
406 mask = E1000_SWFW_PHY1_SM;
407 else if (hw->bus.func == E1000_FUNC_2)
408 mask = E1000_SWFW_PHY2_SM;
409 else if (hw->bus.func == E1000_FUNC_3)
410 mask = E1000_SWFW_PHY3_SM;
411
412 igb_release_swfw_sync_82575(hw, mask);
413}
414
415/**
416 * igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
417 * @hw: pointer to the HW structure
418 * @offset: register offset to be read
419 * @data: pointer to the read data
420 *
421 * Reads the PHY register at offset using the serial gigabit media independent
422 * interface and stores the retrieved information in data.
423 **/
424static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
425 u16 *data)
426{
427 s32 ret_val = -E1000_ERR_PARAM;
428
429 if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
430 hw_dbg("PHY Address %u is out of range\n", offset);
431 goto out;
432 }
433
434 ret_val = hw->phy.ops.acquire(hw);
435 if (ret_val)
436 goto out;
437
438 ret_val = igb_read_phy_reg_i2c(hw, offset, data);
439
440 hw->phy.ops.release(hw);
441
442out:
443 return ret_val;
444}
445
446/**
447 * igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
448 * @hw: pointer to the HW structure
449 * @offset: register offset to write to
450 * @data: data to write at register offset
451 *
452 * Writes the data to PHY register at the offset using the serial gigabit
453 * media independent interface.
454 **/
455static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
456 u16 data)
457{
458 s32 ret_val = -E1000_ERR_PARAM;
459
460
461 if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
462 hw_dbg("PHY Address %d is out of range\n", offset);
463 goto out;
464 }
465
466 ret_val = hw->phy.ops.acquire(hw);
467 if (ret_val)
468 goto out;
469
470 ret_val = igb_write_phy_reg_i2c(hw, offset, data);
471
472 hw->phy.ops.release(hw);
473
474out:
475 return ret_val;
476}
477
478/**
479 * igb_get_phy_id_82575 - Retrieve PHY addr and id
480 * @hw: pointer to the HW structure
481 *
482 * Retrieves the PHY address and ID for both PHY's which do and do not use
483 * sgmi interface.
484 **/
485static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
486{
487 struct e1000_phy_info *phy = &hw->phy;
488 s32 ret_val = 0;
489 u16 phy_id;
490 u32 ctrl_ext;
491 u32 mdic;
492
493 /*
494 * For SGMII PHYs, we try the list of possible addresses until
495 * we find one that works. For non-SGMII PHYs
496 * (e.g. integrated copper PHYs), an address of 1 should
497 * work. The result of this function should mean phy->phy_addr
498 * and phy->id are set correctly.
499 */
500 if (!(igb_sgmii_active_82575(hw))) {
501 phy->addr = 1;
502 ret_val = igb_get_phy_id(hw);
503 goto out;
504 }
505
506 if (igb_sgmii_uses_mdio_82575(hw)) {
507 switch (hw->mac.type) {
508 case e1000_82575:
509 case e1000_82576:
510 mdic = rd32(E1000_MDIC);
511 mdic &= E1000_MDIC_PHY_MASK;
512 phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
513 break;
514 case e1000_82580:
515 case e1000_i350:
516 mdic = rd32(E1000_MDICNFG);
517 mdic &= E1000_MDICNFG_PHY_MASK;
518 phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
519 break;
520 default:
521 ret_val = -E1000_ERR_PHY;
522 goto out;
523 break;
524 }
525 ret_val = igb_get_phy_id(hw);
526 goto out;
527 }
528
529 /* Power on sgmii phy if it is disabled */
530 ctrl_ext = rd32(E1000_CTRL_EXT);
531 wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
532 wrfl();
533 msleep(300);
534
535 /*
536 * The address field in the I2CCMD register is 3 bits and 0 is invalid.
537 * Therefore, we need to test 1-7
538 */
539 for (phy->addr = 1; phy->addr < 8; phy->addr++) {
540 ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
541 if (ret_val == 0) {
542 hw_dbg("Vendor ID 0x%08X read at address %u\n",
543 phy_id, phy->addr);
544 /*
545 * At the time of this writing, The M88 part is
546 * the only supported SGMII PHY product.
547 */
548 if (phy_id == M88_VENDOR)
549 break;
550 } else {
551 hw_dbg("PHY address %u was unreadable\n", phy->addr);
552 }
553 }
554
555 /* A valid PHY type couldn't be found. */
556 if (phy->addr == 8) {
557 phy->addr = 0;
558 ret_val = -E1000_ERR_PHY;
559 goto out;
560 } else {
561 ret_val = igb_get_phy_id(hw);
562 }
563
564 /* restore previous sfp cage power state */
565 wr32(E1000_CTRL_EXT, ctrl_ext);
566
567out:
568 return ret_val;
569}
570
571/**
572 * igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
573 * @hw: pointer to the HW structure
574 *
575 * Resets the PHY using the serial gigabit media independent interface.
576 **/
577static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
578{
579 s32 ret_val;
580
581 /*
582 * This isn't a true "hard" reset, but is the only reset
583 * available to us at this time.
584 */
585
586 hw_dbg("Soft resetting SGMII attached PHY...\n");
587
588 /*
589 * SFP documentation requires the following to configure the SPF module
590 * to work on SGMII. No further documentation is given.
591 */
592 ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
593 if (ret_val)
594 goto out;
595
596 ret_val = igb_phy_sw_reset(hw);
597
598out:
599 return ret_val;
600}
601
602/**
603 * igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
604 * @hw: pointer to the HW structure
605 * @active: true to enable LPLU, false to disable
606 *
607 * Sets the LPLU D0 state according to the active flag. When
608 * activating LPLU this function also disables smart speed
609 * and vice versa. LPLU will not be activated unless the
610 * device autonegotiation advertisement meets standards of
611 * either 10 or 10/100 or 10/100/1000 at all duplexes.
612 * This is a function pointer entry point only called by
613 * PHY setup routines.
614 **/
615static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
616{
617 struct e1000_phy_info *phy = &hw->phy;
618 s32 ret_val;
619 u16 data;
620
621 ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
622 if (ret_val)
623 goto out;
624
625 if (active) {
626 data |= IGP02E1000_PM_D0_LPLU;
627 ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
628 data);
629 if (ret_val)
630 goto out;
631
632 /* When LPLU is enabled, we should disable SmartSpeed */
633 ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
634 &data);
635 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
636 ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
637 data);
638 if (ret_val)
639 goto out;
640 } else {
641 data &= ~IGP02E1000_PM_D0_LPLU;
642 ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
643 data);
644 /*
645 * LPLU and SmartSpeed are mutually exclusive. LPLU is used
646 * during Dx states where the power conservation is most
647 * important. During driver activity we should enable
648 * SmartSpeed, so performance is maintained.
649 */
650 if (phy->smart_speed == e1000_smart_speed_on) {
651 ret_val = phy->ops.read_reg(hw,
652 IGP01E1000_PHY_PORT_CONFIG, &data);
653 if (ret_val)
654 goto out;
655
656 data |= IGP01E1000_PSCFR_SMART_SPEED;
657 ret_val = phy->ops.write_reg(hw,
658 IGP01E1000_PHY_PORT_CONFIG, data);
659 if (ret_val)
660 goto out;
661 } else if (phy->smart_speed == e1000_smart_speed_off) {
662 ret_val = phy->ops.read_reg(hw,
663 IGP01E1000_PHY_PORT_CONFIG, &data);
664 if (ret_val)
665 goto out;
666
667 data &= ~IGP01E1000_PSCFR_SMART_SPEED;
668 ret_val = phy->ops.write_reg(hw,
669 IGP01E1000_PHY_PORT_CONFIG, data);
670 if (ret_val)
671 goto out;
672 }
673 }
674
675out:
676 return ret_val;
677}
678
679/**
680 * igb_acquire_nvm_82575 - Request for access to EEPROM
681 * @hw: pointer to the HW structure
682 *
683 * Acquire the necessary semaphores for exclusive access to the EEPROM.
684 * Set the EEPROM access request bit and wait for EEPROM access grant bit.
685 * Return successful if access grant bit set, else clear the request for
686 * EEPROM access and return -E1000_ERR_NVM (-1).
687 **/
688static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
689{
690 s32 ret_val;
691
692 ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
693 if (ret_val)
694 goto out;
695
696 ret_val = igb_acquire_nvm(hw);
697
698 if (ret_val)
699 igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
700
701out:
702 return ret_val;
703}
704
705/**
706 * igb_release_nvm_82575 - Release exclusive access to EEPROM
707 * @hw: pointer to the HW structure
708 *
709 * Stop any current commands to the EEPROM and clear the EEPROM request bit,
710 * then release the semaphores acquired.
711 **/
712static void igb_release_nvm_82575(struct e1000_hw *hw)
713{
714 igb_release_nvm(hw);
715 igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
716}
717
718/**
719 * igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
720 * @hw: pointer to the HW structure
721 * @mask: specifies which semaphore to acquire
722 *
723 * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
724 * will also specify which port we're acquiring the lock for.
725 **/
726static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
727{
728 u32 swfw_sync;
729 u32 swmask = mask;
730 u32 fwmask = mask << 16;
731 s32 ret_val = 0;
732 s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
733
734 while (i < timeout) {
735 if (igb_get_hw_semaphore(hw)) {
736 ret_val = -E1000_ERR_SWFW_SYNC;
737 goto out;
738 }
739
740 swfw_sync = rd32(E1000_SW_FW_SYNC);
741 if (!(swfw_sync & (fwmask | swmask)))
742 break;
743
744 /*
745 * Firmware currently using resource (fwmask)
746 * or other software thread using resource (swmask)
747 */
748 igb_put_hw_semaphore(hw);
749 mdelay(5);
750 i++;
751 }
752
753 if (i == timeout) {
754 hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
755 ret_val = -E1000_ERR_SWFW_SYNC;
756 goto out;
757 }
758
759 swfw_sync |= swmask;
760 wr32(E1000_SW_FW_SYNC, swfw_sync);
761
762 igb_put_hw_semaphore(hw);
763
764out:
765 return ret_val;
766}
767
768/**
769 * igb_release_swfw_sync_82575 - Release SW/FW semaphore
770 * @hw: pointer to the HW structure
771 * @mask: specifies which semaphore to acquire
772 *
773 * Release the SW/FW semaphore used to access the PHY or NVM. The mask
774 * will also specify which port we're releasing the lock for.
775 **/
776static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
777{
778 u32 swfw_sync;
779
780 while (igb_get_hw_semaphore(hw) != 0);
781 /* Empty */
782
783 swfw_sync = rd32(E1000_SW_FW_SYNC);
784 swfw_sync &= ~mask;
785 wr32(E1000_SW_FW_SYNC, swfw_sync);
786
787 igb_put_hw_semaphore(hw);
788}
789
790/**
791 * igb_get_cfg_done_82575 - Read config done bit
792 * @hw: pointer to the HW structure
793 *
794 * Read the management control register for the config done bit for
795 * completion status. NOTE: silicon which is EEPROM-less will fail trying
796 * to read the config done bit, so an error is *ONLY* logged and returns
797 * 0. If we were to return with error, EEPROM-less silicon
798 * would not be able to be reset or change link.
799 **/
800static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
801{
802 s32 timeout = PHY_CFG_TIMEOUT;
803 s32 ret_val = 0;
804 u32 mask = E1000_NVM_CFG_DONE_PORT_0;
805
806 if (hw->bus.func == 1)
807 mask = E1000_NVM_CFG_DONE_PORT_1;
808 else if (hw->bus.func == E1000_FUNC_2)
809 mask = E1000_NVM_CFG_DONE_PORT_2;
810 else if (hw->bus.func == E1000_FUNC_3)
811 mask = E1000_NVM_CFG_DONE_PORT_3;
812
813 while (timeout) {
814 if (rd32(E1000_EEMNGCTL) & mask)
815 break;
816 msleep(1);
817 timeout--;
818 }
819 if (!timeout)
820 hw_dbg("MNG configuration cycle has not completed.\n");
821
822 /* If EEPROM is not marked present, init the PHY manually */
823 if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
824 (hw->phy.type == e1000_phy_igp_3))
825 igb_phy_init_script_igp3(hw);
826
827 return ret_val;
828}
829
830/**
831 * igb_check_for_link_82575 - Check for link
832 * @hw: pointer to the HW structure
833 *
834 * If sgmii is enabled, then use the pcs register to determine link, otherwise
835 * use the generic interface for determining link.
836 **/
837static s32 igb_check_for_link_82575(struct e1000_hw *hw)
838{
839 s32 ret_val;
840 u16 speed, duplex;
841
842 if (hw->phy.media_type != e1000_media_type_copper) {
843 ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
844 &duplex);
845 /*
846 * Use this flag to determine if link needs to be checked or
847 * not. If we have link clear the flag so that we do not
848 * continue to check for link.
849 */
850 hw->mac.get_link_status = !hw->mac.serdes_has_link;
851 } else {
852 ret_val = igb_check_for_copper_link(hw);
853 }
854
855 return ret_val;
856}
857
858/**
859 * igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
860 * @hw: pointer to the HW structure
861 **/
862void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
863{
864 u32 reg;
865
866
867 if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
868 !igb_sgmii_active_82575(hw))
869 return;
870
871 /* Enable PCS to turn on link */
872 reg = rd32(E1000_PCS_CFG0);
873 reg |= E1000_PCS_CFG_PCS_EN;
874 wr32(E1000_PCS_CFG0, reg);
875
876 /* Power up the laser */
877 reg = rd32(E1000_CTRL_EXT);
878 reg &= ~E1000_CTRL_EXT_SDP3_DATA;
879 wr32(E1000_CTRL_EXT, reg);
880
881 /* flush the write to verify completion */
882 wrfl();
883 msleep(1);
884}
885
886/**
887 * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
888 * @hw: pointer to the HW structure
889 * @speed: stores the current speed
890 * @duplex: stores the current duplex
891 *
892 * Using the physical coding sub-layer (PCS), retrieve the current speed and
893 * duplex, then store the values in the pointers provided.
894 **/
895static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
896 u16 *duplex)
897{
898 struct e1000_mac_info *mac = &hw->mac;
899 u32 pcs;
900
901 /* Set up defaults for the return values of this function */
902 mac->serdes_has_link = false;
903 *speed = 0;
904 *duplex = 0;
905
906 /*
907 * Read the PCS Status register for link state. For non-copper mode,
908 * the status register is not accurate. The PCS status register is
909 * used instead.
910 */
911 pcs = rd32(E1000_PCS_LSTAT);
912
913 /*
914 * The link up bit determines when link is up on autoneg. The sync ok
915 * gets set once both sides sync up and agree upon link. Stable link
916 * can be determined by checking for both link up and link sync ok
917 */
918 if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
919 mac->serdes_has_link = true;
920
921 /* Detect and store PCS speed */
922 if (pcs & E1000_PCS_LSTS_SPEED_1000) {
923 *speed = SPEED_1000;
924 } else if (pcs & E1000_PCS_LSTS_SPEED_100) {
925 *speed = SPEED_100;
926 } else {
927 *speed = SPEED_10;
928 }
929
930 /* Detect and store PCS duplex */
931 if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) {
932 *duplex = FULL_DUPLEX;
933 } else {
934 *duplex = HALF_DUPLEX;
935 }
936 }
937
938 return 0;
939}
940
941/**
942 * igb_shutdown_serdes_link_82575 - Remove link during power down
943 * @hw: pointer to the HW structure
944 *
945 * In the case of fiber serdes, shut down optics and PCS on driver unload
946 * when management pass thru is not enabled.
947 **/
948void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
949{
950 u32 reg;
951
952 if (hw->phy.media_type != e1000_media_type_internal_serdes &&
953 igb_sgmii_active_82575(hw))
954 return;
955
956 if (!igb_enable_mng_pass_thru(hw)) {
957 /* Disable PCS to turn off link */
958 reg = rd32(E1000_PCS_CFG0);
959 reg &= ~E1000_PCS_CFG_PCS_EN;
960 wr32(E1000_PCS_CFG0, reg);
961
962 /* shutdown the laser */
963 reg = rd32(E1000_CTRL_EXT);
964 reg |= E1000_CTRL_EXT_SDP3_DATA;
965 wr32(E1000_CTRL_EXT, reg);
966
967 /* flush the write to verify completion */
968 wrfl();
969 msleep(1);
970 }
971}
972
973/**
974 * igb_reset_hw_82575 - Reset hardware
975 * @hw: pointer to the HW structure
976 *
977 * This resets the hardware into a known state. This is a
978 * function pointer entry point called by the api module.
979 **/
980static s32 igb_reset_hw_82575(struct e1000_hw *hw)
981{
982 u32 ctrl, icr;
983 s32 ret_val;
984
985 /*
986 * Prevent the PCI-E bus from sticking if there is no TLP connection
987 * on the last TLP read/write transaction when MAC is reset.
988 */
989 ret_val = igb_disable_pcie_master(hw);
990 if (ret_val)
991 hw_dbg("PCI-E Master disable polling has failed.\n");
992
993 /* set the completion timeout for interface */
994 ret_val = igb_set_pcie_completion_timeout(hw);
995 if (ret_val) {
996 hw_dbg("PCI-E Set completion timeout has failed.\n");
997 }
998
999 hw_dbg("Masking off all interrupts\n");
1000 wr32(E1000_IMC, 0xffffffff);
1001
1002 wr32(E1000_RCTL, 0);
1003 wr32(E1000_TCTL, E1000_TCTL_PSP);
1004 wrfl();
1005
1006 msleep(10);
1007
1008 ctrl = rd32(E1000_CTRL);
1009
1010 hw_dbg("Issuing a global reset to MAC\n");
1011 wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
1012
1013 ret_val = igb_get_auto_rd_done(hw);
1014 if (ret_val) {
1015 /*
1016 * When auto config read does not complete, do not
1017 * return with an error. This can happen in situations
1018 * where there is no eeprom and prevents getting link.
1019 */
1020 hw_dbg("Auto Read Done did not complete\n");
1021 }
1022
1023 /* If EEPROM is not present, run manual init scripts */
1024 if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
1025 igb_reset_init_script_82575(hw);
1026
1027 /* Clear any pending interrupt events. */
1028 wr32(E1000_IMC, 0xffffffff);
1029 icr = rd32(E1000_ICR);
1030
1031 /* Install any alternate MAC address into RAR0 */
1032 ret_val = igb_check_alt_mac_addr(hw);
1033
1034 return ret_val;
1035}
1036
1037/**
1038 * igb_init_hw_82575 - Initialize hardware
1039 * @hw: pointer to the HW structure
1040 *
1041 * This inits the hardware readying it for operation.
1042 **/
1043static s32 igb_init_hw_82575(struct e1000_hw *hw)
1044{
1045 struct e1000_mac_info *mac = &hw->mac;
1046 s32 ret_val;
1047 u16 i, rar_count = mac->rar_entry_count;
1048
1049 /* Initialize identification LED */
1050 ret_val = igb_id_led_init(hw);
1051 if (ret_val) {
1052 hw_dbg("Error initializing identification LED\n");
1053 /* This is not fatal and we should not stop init due to this */
1054 }
1055
1056 /* Disabling VLAN filtering */
1057 hw_dbg("Initializing the IEEE VLAN\n");
1058 igb_clear_vfta(hw);
1059
1060 /* Setup the receive address */
1061 igb_init_rx_addrs(hw, rar_count);
1062
1063 /* Zero out the Multicast HASH table */
1064 hw_dbg("Zeroing the MTA\n");
1065 for (i = 0; i < mac->mta_reg_count; i++)
1066 array_wr32(E1000_MTA, i, 0);
1067
1068 /* Zero out the Unicast HASH table */
1069 hw_dbg("Zeroing the UTA\n");
1070 for (i = 0; i < mac->uta_reg_count; i++)
1071 array_wr32(E1000_UTA, i, 0);
1072
1073 /* Setup link and flow control */
1074 ret_val = igb_setup_link(hw);
1075
1076 /*
1077 * Clear all of the statistics registers (clear on read). It is
1078 * important that we do this after we have tried to establish link
1079 * because the symbol error count will increment wildly if there
1080 * is no link.
1081 */
1082 igb_clear_hw_cntrs_82575(hw);
1083
1084 return ret_val;
1085}
1086
1087/**
1088 * igb_setup_copper_link_82575 - Configure copper link settings
1089 * @hw: pointer to the HW structure
1090 *
1091 * Configures the link for auto-neg or forced speed and duplex. Then we check
1092 * for link, once link is established calls to configure collision distance
1093 * and flow control are called.
1094 **/
1095static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
1096{
1097 u32 ctrl;
1098 s32 ret_val;
1099
1100 ctrl = rd32(E1000_CTRL);
1101 ctrl |= E1000_CTRL_SLU;
1102 ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
1103 wr32(E1000_CTRL, ctrl);
1104
1105 ret_val = igb_setup_serdes_link_82575(hw);
1106 if (ret_val)
1107 goto out;
1108
1109 if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
1110 /* allow time for SFP cage time to power up phy */
1111 msleep(300);
1112
1113 ret_val = hw->phy.ops.reset(hw);
1114 if (ret_val) {
1115 hw_dbg("Error resetting the PHY.\n");
1116 goto out;
1117 }
1118 }
1119 switch (hw->phy.type) {
1120 case e1000_phy_m88:
1121 if (hw->phy.id == I347AT4_E_PHY_ID ||
1122 hw->phy.id == M88E1112_E_PHY_ID)
1123 ret_val = igb_copper_link_setup_m88_gen2(hw);
1124 else
1125 ret_val = igb_copper_link_setup_m88(hw);
1126 break;
1127 case e1000_phy_igp_3:
1128 ret_val = igb_copper_link_setup_igp(hw);
1129 break;
1130 case e1000_phy_82580:
1131 ret_val = igb_copper_link_setup_82580(hw);
1132 break;
1133 default:
1134 ret_val = -E1000_ERR_PHY;
1135 break;
1136 }
1137
1138 if (ret_val)
1139 goto out;
1140
1141 ret_val = igb_setup_copper_link(hw);
1142out:
1143 return ret_val;
1144}
1145
1146/**
1147 * igb_setup_serdes_link_82575 - Setup link for serdes
1148 * @hw: pointer to the HW structure
1149 *
1150 * Configure the physical coding sub-layer (PCS) link. The PCS link is
1151 * used on copper connections where the serialized gigabit media independent
1152 * interface (sgmii), or serdes fiber is being used. Configures the link
1153 * for auto-negotiation or forces speed/duplex.
1154 **/
1155static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
1156{
1157 u32 ctrl_ext, ctrl_reg, reg;
1158 bool pcs_autoneg;
1159 s32 ret_val = E1000_SUCCESS;
1160 u16 data;
1161
1162 if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
1163 !igb_sgmii_active_82575(hw))
1164 return ret_val;
1165
1166
1167 /*
1168 * On the 82575, SerDes loopback mode persists until it is
1169 * explicitly turned off or a power cycle is performed. A read to
1170 * the register does not indicate its status. Therefore, we ensure
1171 * loopback mode is disabled during initialization.
1172 */
1173 wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
1174
1175 /* power on the sfp cage if present */
1176 ctrl_ext = rd32(E1000_CTRL_EXT);
1177 ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
1178 wr32(E1000_CTRL_EXT, ctrl_ext);
1179
1180 ctrl_reg = rd32(E1000_CTRL);
1181 ctrl_reg |= E1000_CTRL_SLU;
1182
1183 if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
1184 /* set both sw defined pins */
1185 ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
1186
1187 /* Set switch control to serdes energy detect */
1188 reg = rd32(E1000_CONNSW);
1189 reg |= E1000_CONNSW_ENRGSRC;
1190 wr32(E1000_CONNSW, reg);
1191 }
1192
1193 reg = rd32(E1000_PCS_LCTL);
1194
1195 /* default pcs_autoneg to the same setting as mac autoneg */
1196 pcs_autoneg = hw->mac.autoneg;
1197
1198 switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
1199 case E1000_CTRL_EXT_LINK_MODE_SGMII:
1200 /* sgmii mode lets the phy handle forcing speed/duplex */
1201 pcs_autoneg = true;
1202 /* autoneg time out should be disabled for SGMII mode */
1203 reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
1204 break;
1205 case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
1206 /* disable PCS autoneg and support parallel detect only */
1207 pcs_autoneg = false;
1208 default:
1209 if (hw->mac.type == e1000_82575 ||
1210 hw->mac.type == e1000_82576) {
1211 ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
1212 if (ret_val) {
1213 printk(KERN_DEBUG "NVM Read Error\n\n");
1214 return ret_val;
1215 }
1216
1217 if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
1218 pcs_autoneg = false;
1219 }
1220
1221 /*
1222 * non-SGMII modes only supports a speed of 1000/Full for the
1223 * link so it is best to just force the MAC and let the pcs
1224 * link either autoneg or be forced to 1000/Full
1225 */
1226 ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
1227 E1000_CTRL_FD | E1000_CTRL_FRCDPX;
1228
1229 /* set speed of 1000/Full if speed/duplex is forced */
1230 reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
1231 break;
1232 }
1233
1234 wr32(E1000_CTRL, ctrl_reg);
1235
1236 /*
1237 * New SerDes mode allows for forcing speed or autonegotiating speed
1238 * at 1gb. Autoneg should be default set by most drivers. This is the
1239 * mode that will be compatible with older link partners and switches.
1240 * However, both are supported by the hardware and some drivers/tools.
1241 */
1242 reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
1243 E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
1244
1245 /*
1246 * We force flow control to prevent the CTRL register values from being
1247 * overwritten by the autonegotiated flow control values
1248 */
1249 reg |= E1000_PCS_LCTL_FORCE_FCTRL;
1250
1251 if (pcs_autoneg) {
1252 /* Set PCS register for autoneg */
1253 reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
1254 E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
1255 hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
1256 } else {
1257 /* Set PCS register for forced link */
1258 reg |= E1000_PCS_LCTL_FSD; /* Force Speed */
1259
1260 hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
1261 }
1262
1263 wr32(E1000_PCS_LCTL, reg);
1264
1265 if (!igb_sgmii_active_82575(hw))
1266 igb_force_mac_fc(hw);
1267
1268 return ret_val;
1269}
1270
1271/**
1272 * igb_sgmii_active_82575 - Return sgmii state
1273 * @hw: pointer to the HW structure
1274 *
1275 * 82575 silicon has a serialized gigabit media independent interface (sgmii)
1276 * which can be enabled for use in the embedded applications. Simply
1277 * return the current state of the sgmii interface.
1278 **/
1279static bool igb_sgmii_active_82575(struct e1000_hw *hw)
1280{
1281 struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
1282 return dev_spec->sgmii_active;
1283}
1284
1285/**
1286 * igb_reset_init_script_82575 - Inits HW defaults after reset
1287 * @hw: pointer to the HW structure
1288 *
1289 * Inits recommended HW defaults after a reset when there is no EEPROM
1290 * detected. This is only for the 82575.
1291 **/
1292static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
1293{
1294 if (hw->mac.type == e1000_82575) {
1295 hw_dbg("Running reset init script for 82575\n");
1296 /* SerDes configuration via SERDESCTRL */
1297 igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
1298 igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
1299 igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
1300 igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
1301
1302 /* CCM configuration via CCMCTL register */
1303 igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
1304 igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
1305
1306 /* PCIe lanes configuration */
1307 igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
1308 igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
1309 igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
1310 igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
1311
1312 /* PCIe PLL Configuration */
1313 igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
1314 igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
1315 igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
1316 }
1317
1318 return 0;
1319}
1320
1321/**
1322 * igb_read_mac_addr_82575 - Read device MAC address
1323 * @hw: pointer to the HW structure
1324 **/
1325static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
1326{
1327 s32 ret_val = 0;
1328
1329 /*
1330 * If there's an alternate MAC address place it in RAR0
1331 * so that it will override the Si installed default perm
1332 * address.
1333 */
1334 ret_val = igb_check_alt_mac_addr(hw);
1335 if (ret_val)
1336 goto out;
1337
1338 ret_val = igb_read_mac_addr(hw);
1339
1340out:
1341 return ret_val;
1342}
1343
1344/**
1345 * igb_power_down_phy_copper_82575 - Remove link during PHY power down
1346 * @hw: pointer to the HW structure
1347 *
1348 * In the case of a PHY power down to save power, or to turn off link during a
1349 * driver unload, or wake on lan is not enabled, remove the link.
1350 **/
1351void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
1352{
1353 /* If the management interface is not enabled, then power down */
1354 if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
1355 igb_power_down_phy_copper(hw);
1356}
1357
1358/**
1359 * igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
1360 * @hw: pointer to the HW structure
1361 *
1362 * Clears the hardware counters by reading the counter registers.
1363 **/
1364static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
1365{
1366 igb_clear_hw_cntrs_base(hw);
1367
1368 rd32(E1000_PRC64);
1369 rd32(E1000_PRC127);
1370 rd32(E1000_PRC255);
1371 rd32(E1000_PRC511);
1372 rd32(E1000_PRC1023);
1373 rd32(E1000_PRC1522);
1374 rd32(E1000_PTC64);
1375 rd32(E1000_PTC127);
1376 rd32(E1000_PTC255);
1377 rd32(E1000_PTC511);
1378 rd32(E1000_PTC1023);
1379 rd32(E1000_PTC1522);
1380
1381 rd32(E1000_ALGNERRC);
1382 rd32(E1000_RXERRC);
1383 rd32(E1000_TNCRS);
1384 rd32(E1000_CEXTERR);
1385 rd32(E1000_TSCTC);
1386 rd32(E1000_TSCTFC);
1387
1388 rd32(E1000_MGTPRC);
1389 rd32(E1000_MGTPDC);
1390 rd32(E1000_MGTPTC);
1391
1392 rd32(E1000_IAC);
1393 rd32(E1000_ICRXOC);
1394
1395 rd32(E1000_ICRXPTC);
1396 rd32(E1000_ICRXATC);
1397 rd32(E1000_ICTXPTC);
1398 rd32(E1000_ICTXATC);
1399 rd32(E1000_ICTXQEC);
1400 rd32(E1000_ICTXQMTC);
1401 rd32(E1000_ICRXDMTC);
1402
1403 rd32(E1000_CBTMPC);
1404 rd32(E1000_HTDPMC);
1405 rd32(E1000_CBRMPC);
1406 rd32(E1000_RPTHC);
1407 rd32(E1000_HGPTC);
1408 rd32(E1000_HTCBDPC);
1409 rd32(E1000_HGORCL);
1410 rd32(E1000_HGORCH);
1411 rd32(E1000_HGOTCL);
1412 rd32(E1000_HGOTCH);
1413 rd32(E1000_LENERRS);
1414
1415 /* This register should not be read in copper configurations */
1416 if (hw->phy.media_type == e1000_media_type_internal_serdes ||
1417 igb_sgmii_active_82575(hw))
1418 rd32(E1000_SCVPC);
1419}
1420
1421/**
1422 * igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
1423 * @hw: pointer to the HW structure
1424 *
1425 * After rx enable if managability is enabled then there is likely some
1426 * bad data at the start of the fifo and possibly in the DMA fifo. This
1427 * function clears the fifos and flushes any packets that came in as rx was
1428 * being enabled.
1429 **/
1430void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
1431{
1432 u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
1433 int i, ms_wait;
1434
1435 if (hw->mac.type != e1000_82575 ||
1436 !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
1437 return;
1438
1439 /* Disable all RX queues */
1440 for (i = 0; i < 4; i++) {
1441 rxdctl[i] = rd32(E1000_RXDCTL(i));
1442 wr32(E1000_RXDCTL(i),
1443 rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
1444 }
1445 /* Poll all queues to verify they have shut down */
1446 for (ms_wait = 0; ms_wait < 10; ms_wait++) {
1447 msleep(1);
1448 rx_enabled = 0;
1449 for (i = 0; i < 4; i++)
1450 rx_enabled |= rd32(E1000_RXDCTL(i));
1451 if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
1452 break;
1453 }
1454
1455 if (ms_wait == 10)
1456 hw_dbg("Queue disable timed out after 10ms\n");
1457
1458 /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
1459 * incoming packets are rejected. Set enable and wait 2ms so that
1460 * any packet that was coming in as RCTL.EN was set is flushed
1461 */
1462 rfctl = rd32(E1000_RFCTL);
1463 wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
1464
1465 rlpml = rd32(E1000_RLPML);
1466 wr32(E1000_RLPML, 0);
1467
1468 rctl = rd32(E1000_RCTL);
1469 temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
1470 temp_rctl |= E1000_RCTL_LPE;
1471
1472 wr32(E1000_RCTL, temp_rctl);
1473 wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
1474 wrfl();
1475 msleep(2);
1476
1477 /* Enable RX queues that were previously enabled and restore our
1478 * previous state
1479 */
1480 for (i = 0; i < 4; i++)
1481 wr32(E1000_RXDCTL(i), rxdctl[i]);
1482 wr32(E1000_RCTL, rctl);
1483 wrfl();
1484
1485 wr32(E1000_RLPML, rlpml);
1486 wr32(E1000_RFCTL, rfctl);
1487
1488 /* Flush receive errors generated by workaround */
1489 rd32(E1000_ROC);
1490 rd32(E1000_RNBC);
1491 rd32(E1000_MPC);
1492}
1493
1494/**
1495 * igb_set_pcie_completion_timeout - set pci-e completion timeout
1496 * @hw: pointer to the HW structure
1497 *
1498 * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
1499 * however the hardware default for these parts is 500us to 1ms which is less
1500 * than the 10ms recommended by the pci-e spec. To address this we need to
1501 * increase the value to either 10ms to 200ms for capability version 1 config,
1502 * or 16ms to 55ms for version 2.
1503 **/
1504static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
1505{
1506 u32 gcr = rd32(E1000_GCR);
1507 s32 ret_val = 0;
1508 u16 pcie_devctl2;
1509
1510 /* only take action if timeout value is defaulted to 0 */
1511 if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
1512 goto out;
1513
1514 /*
1515 * if capababilities version is type 1 we can write the
1516 * timeout of 10ms to 200ms through the GCR register
1517 */
1518 if (!(gcr & E1000_GCR_CAP_VER2)) {
1519 gcr |= E1000_GCR_CMPL_TMOUT_10ms;
1520 goto out;
1521 }
1522
1523 /*
1524 * for version 2 capabilities we need to write the config space
1525 * directly in order to set the completion timeout value for
1526 * 16ms to 55ms
1527 */
1528 ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
1529 &pcie_devctl2);
1530 if (ret_val)
1531 goto out;
1532
1533 pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
1534
1535 ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
1536 &pcie_devctl2);
1537out:
1538 /* disable completion timeout resend */
1539 gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
1540
1541 wr32(E1000_GCR, gcr);
1542 return ret_val;
1543}
1544
1545/**
1546 * igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
1547 * @hw: pointer to the hardware struct
1548 * @enable: state to enter, either enabled or disabled
1549 * @pf: Physical Function pool - do not set anti-spoofing for the PF
1550 *
1551 * enables/disables L2 switch anti-spoofing functionality.
1552 **/
1553void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
1554{
1555 u32 dtxswc;
1556
1557 switch (hw->mac.type) {
1558 case e1000_82576:
1559 case e1000_i350:
1560 dtxswc = rd32(E1000_DTXSWC);
1561 if (enable) {
1562 dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
1563 E1000_DTXSWC_VLAN_SPOOF_MASK);
1564 /* The PF can spoof - it has to in order to
1565 * support emulation mode NICs */
1566 dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
1567 } else {
1568 dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
1569 E1000_DTXSWC_VLAN_SPOOF_MASK);
1570 }
1571 wr32(E1000_DTXSWC, dtxswc);
1572 break;
1573 default:
1574 break;
1575 }
1576}
1577
1578/**
1579 * igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
1580 * @hw: pointer to the hardware struct
1581 * @enable: state to enter, either enabled or disabled
1582 *
1583 * enables/disables L2 switch loopback functionality.
1584 **/
1585void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
1586{
1587 u32 dtxswc = rd32(E1000_DTXSWC);
1588
1589 if (enable)
1590 dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
1591 else
1592 dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
1593
1594 wr32(E1000_DTXSWC, dtxswc);
1595}
1596
1597/**
1598 * igb_vmdq_set_replication_pf - enable or disable vmdq replication
1599 * @hw: pointer to the hardware struct
1600 * @enable: state to enter, either enabled or disabled
1601 *
1602 * enables/disables replication of packets across multiple pools.
1603 **/
1604void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
1605{
1606 u32 vt_ctl = rd32(E1000_VT_CTL);
1607
1608 if (enable)
1609 vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
1610 else
1611 vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
1612
1613 wr32(E1000_VT_CTL, vt_ctl);
1614}
1615
1616/**
1617 * igb_read_phy_reg_82580 - Read 82580 MDI control register
1618 * @hw: pointer to the HW structure
1619 * @offset: register offset to be read
1620 * @data: pointer to the read data
1621 *
1622 * Reads the MDI control register in the PHY at offset and stores the
1623 * information read to data.
1624 **/
1625static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
1626{
1627 s32 ret_val;
1628
1629
1630 ret_val = hw->phy.ops.acquire(hw);
1631 if (ret_val)
1632 goto out;
1633
1634 ret_val = igb_read_phy_reg_mdic(hw, offset, data);
1635
1636 hw->phy.ops.release(hw);
1637
1638out:
1639 return ret_val;
1640}
1641
1642/**
1643 * igb_write_phy_reg_82580 - Write 82580 MDI control register
1644 * @hw: pointer to the HW structure
1645 * @offset: register offset to write to
1646 * @data: data to write to register at offset
1647 *
1648 * Writes data to MDI control register in the PHY at offset.
1649 **/
1650static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
1651{
1652 s32 ret_val;
1653
1654
1655 ret_val = hw->phy.ops.acquire(hw);
1656 if (ret_val)
1657 goto out;
1658
1659 ret_val = igb_write_phy_reg_mdic(hw, offset, data);
1660
1661 hw->phy.ops.release(hw);
1662
1663out:
1664 return ret_val;
1665}
1666
1667/**
1668 * igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
1669 * @hw: pointer to the HW structure
1670 *
1671 * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
1672 * the values found in the EEPROM. This addresses an issue in which these
1673 * bits are not restored from EEPROM after reset.
1674 **/
1675static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
1676{
1677 s32 ret_val = 0;
1678 u32 mdicnfg;
1679 u16 nvm_data = 0;
1680
1681 if (hw->mac.type != e1000_82580)
1682 goto out;
1683 if (!igb_sgmii_active_82575(hw))
1684 goto out;
1685
1686 ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
1687 NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
1688 &nvm_data);
1689 if (ret_val) {
1690 hw_dbg("NVM Read Error\n");
1691 goto out;
1692 }
1693
1694 mdicnfg = rd32(E1000_MDICNFG);
1695 if (nvm_data & NVM_WORD24_EXT_MDIO)
1696 mdicnfg |= E1000_MDICNFG_EXT_MDIO;
1697 if (nvm_data & NVM_WORD24_COM_MDIO)
1698 mdicnfg |= E1000_MDICNFG_COM_MDIO;
1699 wr32(E1000_MDICNFG, mdicnfg);
1700out:
1701 return ret_val;
1702}
1703
1704/**
1705 * igb_reset_hw_82580 - Reset hardware
1706 * @hw: pointer to the HW structure
1707 *
1708 * This resets function or entire device (all ports, etc.)
1709 * to a known state.
1710 **/
1711static s32 igb_reset_hw_82580(struct e1000_hw *hw)
1712{
1713 s32 ret_val = 0;
1714 /* BH SW mailbox bit in SW_FW_SYNC */
1715 u16 swmbsw_mask = E1000_SW_SYNCH_MB;
1716 u32 ctrl, icr;
1717 bool global_device_reset = hw->dev_spec._82575.global_device_reset;
1718
1719
1720 hw->dev_spec._82575.global_device_reset = false;
1721
1722 /* Get current control state. */
1723 ctrl = rd32(E1000_CTRL);
1724
1725 /*
1726 * Prevent the PCI-E bus from sticking if there is no TLP connection
1727 * on the last TLP read/write transaction when MAC is reset.
1728 */
1729 ret_val = igb_disable_pcie_master(hw);
1730 if (ret_val)
1731 hw_dbg("PCI-E Master disable polling has failed.\n");
1732
1733 hw_dbg("Masking off all interrupts\n");
1734 wr32(E1000_IMC, 0xffffffff);
1735 wr32(E1000_RCTL, 0);
1736 wr32(E1000_TCTL, E1000_TCTL_PSP);
1737 wrfl();
1738
1739 msleep(10);
1740
1741 /* Determine whether or not a global dev reset is requested */
1742 if (global_device_reset &&
1743 igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
1744 global_device_reset = false;
1745
1746 if (global_device_reset &&
1747 !(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
1748 ctrl |= E1000_CTRL_DEV_RST;
1749 else
1750 ctrl |= E1000_CTRL_RST;
1751
1752 wr32(E1000_CTRL, ctrl);
1753 wrfl();
1754
1755 /* Add delay to insure DEV_RST has time to complete */
1756 if (global_device_reset)
1757 msleep(5);
1758
1759 ret_val = igb_get_auto_rd_done(hw);
1760 if (ret_val) {
1761 /*
1762 * When auto config read does not complete, do not
1763 * return with an error. This can happen in situations
1764 * where there is no eeprom and prevents getting link.
1765 */
1766 hw_dbg("Auto Read Done did not complete\n");
1767 }
1768
1769 /* If EEPROM is not present, run manual init scripts */
1770 if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
1771 igb_reset_init_script_82575(hw);
1772
1773 /* clear global device reset status bit */
1774 wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
1775
1776 /* Clear any pending interrupt events. */
1777 wr32(E1000_IMC, 0xffffffff);
1778 icr = rd32(E1000_ICR);
1779
1780 ret_val = igb_reset_mdicnfg_82580(hw);
1781 if (ret_val)
1782 hw_dbg("Could not reset MDICNFG based on EEPROM\n");
1783
1784 /* Install any alternate MAC address into RAR0 */
1785 ret_val = igb_check_alt_mac_addr(hw);
1786
1787 /* Release semaphore */
1788 if (global_device_reset)
1789 igb_release_swfw_sync_82575(hw, swmbsw_mask);
1790
1791 return ret_val;
1792}
1793
1794/**
1795 * igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
1796 * @data: data received by reading RXPBS register
1797 *
1798 * The 82580 uses a table based approach for packet buffer allocation sizes.
1799 * This function converts the retrieved value into the correct table value
1800 * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
1801 * 0x0 36 72 144 1 2 4 8 16
1802 * 0x8 35 70 140 rsv rsv rsv rsv rsv
1803 */
1804u16 igb_rxpbs_adjust_82580(u32 data)
1805{
1806 u16 ret_val = 0;
1807
1808 if (data < E1000_82580_RXPBS_TABLE_SIZE)
1809 ret_val = e1000_82580_rxpbs_table[data];
1810
1811 return ret_val;
1812}
1813
1814/**
1815 * igb_validate_nvm_checksum_with_offset - Validate EEPROM
1816 * checksum
1817 * @hw: pointer to the HW structure
1818 * @offset: offset in words of the checksum protected region
1819 *
1820 * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
1821 * and then verifies that the sum of the EEPROM is equal to 0xBABA.
1822 **/
1823s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
1824{
1825 s32 ret_val = 0;
1826 u16 checksum = 0;
1827 u16 i, nvm_data;
1828
1829 for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
1830 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
1831 if (ret_val) {
1832 hw_dbg("NVM Read Error\n");
1833 goto out;
1834 }
1835 checksum += nvm_data;
1836 }
1837
1838 if (checksum != (u16) NVM_SUM) {
1839 hw_dbg("NVM Checksum Invalid\n");
1840 ret_val = -E1000_ERR_NVM;
1841 goto out;
1842 }
1843
1844out:
1845 return ret_val;
1846}
1847
1848/**
1849 * igb_update_nvm_checksum_with_offset - Update EEPROM
1850 * checksum
1851 * @hw: pointer to the HW structure
1852 * @offset: offset in words of the checksum protected region
1853 *
1854 * Updates the EEPROM checksum by reading/adding each word of the EEPROM
1855 * up to the checksum. Then calculates the EEPROM checksum and writes the
1856 * value to the EEPROM.
1857 **/
1858s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
1859{
1860 s32 ret_val;
1861 u16 checksum = 0;
1862 u16 i, nvm_data;
1863
1864 for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
1865 ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
1866 if (ret_val) {
1867 hw_dbg("NVM Read Error while updating checksum.\n");
1868 goto out;
1869 }
1870 checksum += nvm_data;
1871 }
1872 checksum = (u16) NVM_SUM - checksum;
1873 ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
1874 &checksum);
1875 if (ret_val)
1876 hw_dbg("NVM Write Error while updating checksum.\n");
1877
1878out:
1879 return ret_val;
1880}
1881
1882/**
1883 * igb_validate_nvm_checksum_82580 - Validate EEPROM checksum
1884 * @hw: pointer to the HW structure
1885 *
1886 * Calculates the EEPROM section checksum by reading/adding each word of
1887 * the EEPROM and then verifies that the sum of the EEPROM is
1888 * equal to 0xBABA.
1889 **/
1890static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
1891{
1892 s32 ret_val = 0;
1893 u16 eeprom_regions_count = 1;
1894 u16 j, nvm_data;
1895 u16 nvm_offset;
1896
1897 ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
1898 if (ret_val) {
1899 hw_dbg("NVM Read Error\n");
1900 goto out;
1901 }
1902
1903 if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
1904 /* if checksums compatibility bit is set validate checksums
1905 * for all 4 ports. */
1906 eeprom_regions_count = 4;
1907 }
1908
1909 for (j = 0; j < eeprom_regions_count; j++) {
1910 nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
1911 ret_val = igb_validate_nvm_checksum_with_offset(hw,
1912 nvm_offset);
1913 if (ret_val != 0)
1914 goto out;
1915 }
1916
1917out:
1918 return ret_val;
1919}
1920
1921/**
1922 * igb_update_nvm_checksum_82580 - Update EEPROM checksum
1923 * @hw: pointer to the HW structure
1924 *
1925 * Updates the EEPROM section checksums for all 4 ports by reading/adding
1926 * each word of the EEPROM up to the checksum. Then calculates the EEPROM
1927 * checksum and writes the value to the EEPROM.
1928 **/
1929static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
1930{
1931 s32 ret_val;
1932 u16 j, nvm_data;
1933 u16 nvm_offset;
1934
1935 ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
1936 if (ret_val) {
1937 hw_dbg("NVM Read Error while updating checksum"
1938 " compatibility bit.\n");
1939 goto out;
1940 }
1941
1942 if ((nvm_data & NVM_COMPATIBILITY_BIT_MASK) == 0) {
1943 /* set compatibility bit to validate checksums appropriately */
1944 nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
1945 ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
1946 &nvm_data);
1947 if (ret_val) {
1948 hw_dbg("NVM Write Error while updating checksum"
1949 " compatibility bit.\n");
1950 goto out;
1951 }
1952 }
1953
1954 for (j = 0; j < 4; j++) {
1955 nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
1956 ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
1957 if (ret_val)
1958 goto out;
1959 }
1960
1961out:
1962 return ret_val;
1963}
1964
1965/**
1966 * igb_validate_nvm_checksum_i350 - Validate EEPROM checksum
1967 * @hw: pointer to the HW structure
1968 *
1969 * Calculates the EEPROM section checksum by reading/adding each word of
1970 * the EEPROM and then verifies that the sum of the EEPROM is
1971 * equal to 0xBABA.
1972 **/
1973static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw)
1974{
1975 s32 ret_val = 0;
1976 u16 j;
1977 u16 nvm_offset;
1978
1979 for (j = 0; j < 4; j++) {
1980 nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
1981 ret_val = igb_validate_nvm_checksum_with_offset(hw,
1982 nvm_offset);
1983 if (ret_val != 0)
1984 goto out;
1985 }
1986
1987out:
1988 return ret_val;
1989}
1990
1991/**
1992 * igb_update_nvm_checksum_i350 - Update EEPROM checksum
1993 * @hw: pointer to the HW structure
1994 *
1995 * Updates the EEPROM section checksums for all 4 ports by reading/adding
1996 * each word of the EEPROM up to the checksum. Then calculates the EEPROM
1997 * checksum and writes the value to the EEPROM.
1998 **/
1999static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
2000{
2001 s32 ret_val = 0;
2002 u16 j;
2003 u16 nvm_offset;
2004
2005 for (j = 0; j < 4; j++) {
2006 nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
2007 ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
2008 if (ret_val != 0)
2009 goto out;
2010 }
2011
2012out:
2013 return ret_val;
2014}
2015
2016/**
2017 * igb_set_eee_i350 - Enable/disable EEE support
2018 * @hw: pointer to the HW structure
2019 *
2020 * Enable/disable EEE based on setting in dev_spec structure.
2021 *
2022 **/
2023s32 igb_set_eee_i350(struct e1000_hw *hw)
2024{
2025 s32 ret_val = 0;
2026 u32 ipcnfg, eeer, ctrl_ext;
2027
2028 ctrl_ext = rd32(E1000_CTRL_EXT);
2029 if ((hw->mac.type != e1000_i350) ||
2030 (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK))
2031 goto out;
2032 ipcnfg = rd32(E1000_IPCNFG);
2033 eeer = rd32(E1000_EEER);
2034
2035 /* enable or disable per user setting */
2036 if (!(hw->dev_spec._82575.eee_disable)) {
2037 ipcnfg |= (E1000_IPCNFG_EEE_1G_AN |
2038 E1000_IPCNFG_EEE_100M_AN);
2039 eeer |= (E1000_EEER_TX_LPI_EN |
2040 E1000_EEER_RX_LPI_EN |
2041 E1000_EEER_LPI_FC);
2042
2043 } else {
2044 ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN |
2045 E1000_IPCNFG_EEE_100M_AN);
2046 eeer &= ~(E1000_EEER_TX_LPI_EN |
2047 E1000_EEER_RX_LPI_EN |
2048 E1000_EEER_LPI_FC);
2049 }
2050 wr32(E1000_IPCNFG, ipcnfg);
2051 wr32(E1000_EEER, eeer);
2052out:
2053
2054 return ret_val;
2055}
2056
2057static struct e1000_mac_operations e1000_mac_ops_82575 = {
2058 .init_hw = igb_init_hw_82575,
2059 .check_for_link = igb_check_for_link_82575,
2060 .rar_set = igb_rar_set,
2061 .read_mac_addr = igb_read_mac_addr_82575,
2062 .get_speed_and_duplex = igb_get_speed_and_duplex_copper,
2063};
2064
2065static struct e1000_phy_operations e1000_phy_ops_82575 = {
2066 .acquire = igb_acquire_phy_82575,
2067 .get_cfg_done = igb_get_cfg_done_82575,
2068 .release = igb_release_phy_82575,
2069};
2070
2071static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
2072 .acquire = igb_acquire_nvm_82575,
2073 .read = igb_read_nvm_eerd,
2074 .release = igb_release_nvm_82575,
2075 .write = igb_write_nvm_spi,
2076};
2077
2078const struct e1000_info e1000_82575_info = {
2079 .get_invariants = igb_get_invariants_82575,
2080 .mac_ops = &e1000_mac_ops_82575,
2081 .phy_ops = &e1000_phy_ops_82575,
2082 .nvm_ops = &e1000_nvm_ops_82575,
2083};
2084
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-16 10:25:22 -0400