1 files changed, 0 insertions, 55 deletions

diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
deleted file mode 100644
index 4416ccc3347..00000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Generic CPU0 cpufreq driver
-
-It is a generic cpufreq driver for CPU0 frequency management.  It
-supports both uniprocessor (UP) and symmetric multiprocessor (SMP)
-systems which share clock and voltage across all CPUs.
-
-Both required and optional properties listed below must be defined
-under node /cpus/cpu@0.
-
-Required properties:
-- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt
-  for details
-
-Optional properties:
-- clock-latency: Specify the possible maximum transition latency for clock,
-  in unit of nanoseconds.
-- voltage-tolerance: Specify the CPU voltage tolerance in percentage.
-
-Examples:
-
-cpus {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        cpu@0 {
-                compatible = "arm,cortex-a9";
-                reg = <0>;
-                next-level-cache = <&L2>;
-                operating-points = <
-                        /* kHz    uV */
-                        792000  1100000
-                        396000  950000
-                        198000  850000
-                >;
-                transition-latency = <61036>; /* two CLK32 periods */
-        };
-
-        cpu@1 {
-                compatible = "arm,cortex-a9";
-                reg = <1>;
-                next-level-cache = <&L2>;
-        };
-
-        cpu@2 {
-                compatible = "arm,cortex-a9";
-                reg = <2>;
-                next-level-cache = <&L2>;
-        };
-
-        cpu@3 {
-                compatible = "arm,cortex-a9";
-                reg = <3>;
-                next-level-cache = <&L2>;
-        };
-};