1 files changed, 0 insertions, 46 deletions

diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt
deleted file mode 100644
index 3545ea704b5..00000000000
--- a/Documentation/devicetree/bindings/arm/davinci/nand.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-* Texas Instruments Davinci NAND
-
-This file provides information, what the device node for the
-davinci nand interface contain.
-
-Required properties:
-- compatible: "ti,davinci-nand";
-- reg : contain 2 offset/length values:
-        - offset and length for the access window
-        - offset and length for accessing the aemif control registers
-- ti,davinci-chipselect: Indicates on the davinci_nand driver which
-                         chipselect is used for accessing the nand.
-
-Recommended properties :
-- ti,davinci-mask-ale: mask for ale
-- ti,davinci-mask-cle: mask for cle
-- ti,davinci-mask-chipsel: mask for chipselect
-- ti,davinci-ecc-mode: ECC mode valid values for davinci driver:
-                - "none"
-                - "soft"
-                - "hw"
-- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4.
-- ti,davinci-nand-buswidth: buswidth 8 or 16
-- ti,davinci-nand-use-bbt: use flash based bad block table support.
-
-nand device bindings may contain additional sub-nodes describing
-partitions of the address space. See partition.txt for more detail.
-
-Example(da850 EVM ):
-nand_cs3@62000000 {
-        compatible = "ti,davinci-nand";
-        reg = <0x62000000 0x807ff
-                0x68000000 0x8000>;
-        ti,davinci-chipselect = <1>;
-        ti,davinci-mask-ale = <0>;
-        ti,davinci-mask-cle = <0>;
-        ti,davinci-mask-chipsel = <0>;
-        ti,davinci-ecc-mode = "hw";
-        ti,davinci-ecc-bits = <4>;
-        ti,davinci-nand-use-bbt;
-
-        partition@180000 {
-                label = "ubifs";
-                reg = <0x180000 0x7e80000>;
-        };
-};