blackfin: twi: move twi bit mask macro to twi head file

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

1 files changed, 70 insertions, 0 deletions

diff --git a/arch/blackfin/include/asm/bfin_twi.h b/arch/blackfin/include/asm/bfin_twi.h
index e767d649dfc..74d10237f70 100644
--- a/arch/blackfin/include/asm/bfin_twi.h
+++ b/arch/blackfin/include/asm/bfin_twi.h
@@ -42,4 +42,74 @@ struct bfin_twi_regs {
 
 #undef __BFP
 
+/*  ********************  TWO-WIRE INTERFACE (TWI) MASKS  ***********************/
+/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y);  )                                */
+#define CLKLOW(x)       ((x) & 0xFF)    /* Periods Clock Is Held Low                    */
+#define CLKHI(y)        (((y)&0xFF)<<0x8)       /* Periods Before New Clock Low                 */
+
+/* TWI_PRESCALE Masks                                                                                                                   */
+#define PRESCALE        0x007F  /* SCLKs Per Internal Time Reference (10MHz)    */
+#define TWI_ENA         0x0080  /* TWI Enable                                                                   */
+#define SCCB            0x0200  /* SCCB Compatibility Enable                                    */
+
+/* TWI_SLAVE_CTL Masks                                                                                                                  */
+#define SEN                     0x0001  /* Slave Enable                                                                 */
+#define SADD_LEN        0x0002  /* Slave Address Length                                                 */
+#define STDVAL          0x0004  /* Slave Transmit Data Valid                                    */
+#define NAK                     0x0008  /* NAK/ACK* Generated At Conclusion Of Transfer */
+#define GEN                     0x0010  /* General Call Address Matching Enabled                */
+
+/* TWI_SLAVE_STAT Masks                                                                                                                 */
+#define SDIR            0x0001  /* Slave Transfer Direction (Transmit/Receive*) */
+#define GCALL           0x0002  /* General Call Indicator                                               */
+
+/* TWI_MASTER_CTL Masks                                                                                                 */
+#define MEN                     0x0001  /* Master Mode Enable                                           */
+#define MADD_LEN        0x0002  /* Master Address Length                                        */
+#define MDIR            0x0004  /* Master Transmit Direction (RX/TX*)           */
+#define FAST            0x0008  /* Use Fast Mode Timing Specs                           */
+#define STOP            0x0010  /* Issue Stop Condition                                         */
+#define RSTART          0x0020  /* Repeat Start or Stop* At End Of Transfer     */
+#define DCNT            0x3FC0  /* Data Bytes To Transfer                                       */
+#define SDAOVR          0x4000  /* Serial Data Override                                         */
+#define SCLOVR          0x8000  /* Serial Clock Override                                        */
+
+/* TWI_MASTER_STAT Masks                                                                                                                */
+#define MPROG           0x0001  /* Master Transfer In Progress                                  */
+#define LOSTARB         0x0002  /* Lost Arbitration Indicator (Xfer Aborted)    */
+#define ANAK            0x0004  /* Address Not Acknowledged                                             */
+#define DNAK            0x0008  /* Data Not Acknowledged                                                */
+#define BUFRDERR        0x0010  /* Buffer Read Error                                                    */
+#define BUFWRERR        0x0020  /* Buffer Write Error                                                   */
+#define SDASEN          0x0040  /* Serial Data Sense                                                    */
+#define SCLSEN          0x0080  /* Serial Clock Sense                                                   */
+#define BUSBUSY         0x0100  /* Bus Busy Indicator                                                   */
+
+/* TWI_INT_SRC and TWI_INT_ENABLE Masks                                         */
+#define SINIT           0x0001  /* Slave Transfer Initiated     */
+#define SCOMP           0x0002  /* Slave Transfer Complete      */
+#define SERR            0x0004  /* Slave Transfer Error         */
+#define SOVF            0x0008  /* Slave Overflow                       */
+#define MCOMP           0x0010  /* Master Transfer Complete     */
+#define MERR            0x0020  /* Master Transfer Error        */
+#define XMTSERV         0x0040  /* Transmit FIFO Service        */
+#define RCVSERV         0x0080  /* Receive FIFO Service         */
+
+/* TWI_FIFO_CTRL Masks                                                                                          */
+#define XMTFLUSH        0x0001  /* Transmit Buffer Flush                        */
+#define RCVFLUSH        0x0002  /* Receive Buffer Flush                         */
+#define XMTINTLEN       0x0004  /* Transmit Buffer Interrupt Length     */
+#define RCVINTLEN       0x0008  /* Receive Buffer Interrupt Length      */
+
+/* TWI_FIFO_STAT Masks                                                                                                                  */
+#define XMTSTAT         0x0003  /* Transmit FIFO Status                                                 */
+#define XMT_EMPTY       0x0000  /*              Transmit FIFO Empty                                             */
+#define XMT_HALF        0x0001  /*              Transmit FIFO Has 1 Byte To Write               */
+#define XMT_FULL        0x0003  /*              Transmit FIFO Full (2 Bytes To Write)   */
+
+#define RCVSTAT         0x000C  /* Receive FIFO Status                                                  */
+#define RCV_EMPTY       0x0000  /*              Receive FIFO Empty                                              */
+#define RCV_HALF        0x0004  /*              Receive FIFO Has 1 Byte To Read                 */
+#define RCV_FULL        0x000C  /*              Receive FIFO Full (2 Bytes To Read)             */
+
 #endif