Added missing tegra files.HEADmaster

1 files changed, 293 insertions, 0 deletions

diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c
new file mode 100644
index 00000000000..e6be5711c70
--- /dev/null
+++ b/arch/arm/mach-ixp23xx/pci.c
@@ -0,0 +1,293 @@
+/*
+ * arch/arm/mach-ixp23xx/pci.c
+ *
+ * PCI routines for IXP23XX based systems
+ *
+ * Copyright (c) 2005 MontaVista Software, Inc.
+ *
+ * based on original code:
+ *
+ * Author: Naeem Afzal <naeem.m.afzal@intel.com>
+ * Copyright 2002-2005 Intel Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/sizes.h>
+#include <asm/system.h>
+#include <asm/mach/pci.h>
+#include <mach/hardware.h>
+
+extern int (*external_fault) (unsigned long, struct pt_regs *);
+
+static volatile int pci_master_aborts = 0;
+
+#ifdef DEBUG
+#define DBG(x...)       printk(x)
+#else
+#define DBG(x...)
+#endif
+
+int clear_master_aborts(void);
+
+static u32
+*ixp23xx_pci_config_addr(unsigned int bus_nr, unsigned int devfn, int where)
+{
+        u32 *paddress;
+
+        /*
+         * Must be dword aligned
+         */
+        where &= ~3;
+
+        /*
+         * For top bus, generate type 0, else type 1
+         */
+        if (!bus_nr) {
+                if (PCI_SLOT(devfn) >= 8)
+                        return 0;
+
+                paddress = (u32 *) (IXP23XX_PCI_CFG0_VIRT
+                                    | (1 << (PCI_SLOT(devfn) + 16))
+                                    | (PCI_FUNC(devfn) << 8) | where);
+        } else {
+                paddress = (u32 *) (IXP23XX_PCI_CFG1_VIRT
+                                    | (bus_nr << 16)
+                                    | (PCI_SLOT(devfn) << 11)
+                                    | (PCI_FUNC(devfn) << 8) | where);
+        }
+
+        return paddress;
+}
+
+/*
+ * Mask table, bits to mask for quantity of size 1, 2 or 4 bytes.
+ * 0 and 3 are not valid indexes...
+ */
+static u32 bytemask[] = {
+        /*0*/   0,
+        /*1*/   0xff,
+        /*2*/   0xffff,
+        /*3*/   0,
+        /*4*/   0xffffffff,
+};
+
+static int ixp23xx_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+                                int where, int size, u32 *value)
+{
+        u32 n;
+        u32 *addr;
+
+        n = where % 4;
+
+        DBG("In config_read(%d) %d from dev %d:%d:%d\n", size, where,
+                bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+        addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+        if (!addr)
+                return PCIBIOS_DEVICE_NOT_FOUND;
+
+        pci_master_aborts = 0;
+        *value = (*addr >> (8*n)) & bytemask[size];
+        if (pci_master_aborts) {
+                        pci_master_aborts = 0;
+                        *value = 0xffffffff;
+                        return PCIBIOS_DEVICE_NOT_FOUND;
+                }
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+/*
+ * We don't do error checking on the address for writes.
+ * It's assumed that the user checked for the device existing first
+ * by doing a read first.
+ */
+static int ixp23xx_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+                                        int where, int size, u32 value)
+{
+        u32 mask;
+        u32 *addr;
+        u32 temp;
+
+        mask = ~(bytemask[size] << ((where % 0x4) * 8));
+        addr = ixp23xx_pci_config_addr(bus->number, devfn, where);
+        if (!addr)
+                return PCIBIOS_DEVICE_NOT_FOUND;
+        temp = (u32) (value) << ((where % 0x4) * 8);
+        *addr = (*addr & mask) | temp;
+
+        clear_master_aborts();
+
+        return PCIBIOS_SUCCESSFUL;
+}
+
+struct pci_ops ixp23xx_pci_ops = {
+        .read   = ixp23xx_pci_read_config,
+        .write  = ixp23xx_pci_write_config,
+};
+
+struct pci_bus *ixp23xx_pci_scan_bus(int nr, struct pci_sys_data *sysdata)
+{
+        return pci_scan_bus(sysdata->busnr, &ixp23xx_pci_ops, sysdata);
+}
+
+int ixp23xx_pci_abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
+{
+        volatile unsigned long temp;
+        unsigned long flags;
+
+        pci_master_aborts = 1;
+
+        local_irq_save(flags);
+        temp = *IXP23XX_PCI_CONTROL;
+
+        /*
+         * master abort and cmd tgt err
+         */
+        if (temp & ((1 << 8) | (1 << 5)))
+                *IXP23XX_PCI_CONTROL = temp;
+
+        temp = *IXP23XX_PCI_CMDSTAT;
+
+        if (temp & (1 << 29))
+                *IXP23XX_PCI_CMDSTAT = temp;
+        local_irq_restore(flags);
+
+        /*
+         * If it was an imprecise abort, then we need to correct the
+         * return address to be _after_ the instruction.
+         */
+        if (fsr & (1 << 10))
+                regs->ARM_pc += 4;
+
+        return 0;
+}
+
+int clear_master_aborts(void)
+{
+        volatile u32 temp;
+
+        temp = *IXP23XX_PCI_CONTROL;
+
+        /*
+         * master abort and cmd tgt err
+         */
+        if (temp & ((1 << 8) | (1 << 5)))
+                *IXP23XX_PCI_CONTROL = temp;
+
+        temp = *IXP23XX_PCI_CMDSTAT;
+
+        if (temp & (1 << 29))
+                *IXP23XX_PCI_CMDSTAT = temp;
+
+        return 0;
+}
+
+static void __init ixp23xx_pci_common_init(void)
+{
+#ifdef __ARMEB__
+        *IXP23XX_PCI_CONTROL |= 0x20000;        /* set I/O swapping */
+#endif
+        /*
+         * ADDR_31 needs to be clear for PCI memory access to CPP memory
+         */
+        *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_ADDR_31;
+        *IXP23XX_CPP2XSI_CURR_XFER_REG3 |= IXP23XX_CPP2XSI_PSH_OFF;
+
+        /*
+         * Select correct memory for PCI inbound transactions
+         */
+        if (ixp23xx_cpp_boot()) {
+                *IXP23XX_PCI_CPP_ADDR_BITS &= ~(1 << 1);
+        } else {
+                *IXP23XX_PCI_CPP_ADDR_BITS |= (1 << 1);
+
+                /*
+                 * Enable coherency on A2 silicon.
+                 */
+                if (arch_is_coherent())
+                        *IXP23XX_CPP2XSI_CURR_XFER_REG3 &= ~IXP23XX_CPP2XSI_COH_OFF;
+        }
+}
+
+void __init ixp23xx_pci_preinit(void)
+{
+        pcibios_min_io = 0;
+        pcibios_min_mem = 0xe0000000;
+
+        pci_set_flags(0);
+
+        ixp23xx_pci_common_init();
+
+        hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0,
+                        "PCI config cycle to non-existent device");
+
+        *IXP23XX_PCI_ADDR_EXT = 0x0000e000;
+}
+
+/*
+ * Prevent PCI layer from seeing the inbound host-bridge resources
+ */
+static void __devinit pci_fixup_ixp23xx(struct pci_dev *dev)
+{
+        int i;
+
+        dev->class &= 0xff;
+        dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+        for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+                dev->resource[i].start = 0;
+                dev->resource[i].end   = 0;
+                dev->resource[i].flags = 0;
+        }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x9002, pci_fixup_ixp23xx);
+
+/*
+ * IXP2300 systems often have large resource requirements, so we just
+ * use our own resource space.
+ */
+static struct resource ixp23xx_pci_mem_space = {
+        .start  = IXP23XX_PCI_MEM_START,
+        .end    = IXP23XX_PCI_MEM_START + IXP23XX_PCI_MEM_SIZE - 1,
+        .flags  = IORESOURCE_MEM,
+        .name   = "PCI Mem Space"
+};
+
+static struct resource ixp23xx_pci_io_space = {
+        .start  = 0x00000100,
+        .end    = 0x01ffffff,
+        .flags  = IORESOURCE_IO,
+        .name   = "PCI I/O Space"
+};
+
+int ixp23xx_pci_setup(int nr, struct pci_sys_data *sys)
+{
+        if (nr >= 1)
+                return 0;
+
+        sys->resource[0] = &ixp23xx_pci_io_space;
+        sys->resource[1] = &ixp23xx_pci_mem_space;
+        sys->resource[2] = NULL;
+
+        return 1;
+}
+
+void __init ixp23xx_pci_slave_init(void)
+{
+        ixp23xx_pci_common_init();
+}