19 files changed, 468 insertions, 263 deletions

diff --git a/drivers/media/video/cx18/Makefile b/drivers/media/video/cx18/Makefile
index b23d2e26120..f7bf0edf93f 100644
--- a/drivers/media/video/cx18/Makefile
+++ b/drivers/media/video/cx18/Makefile
@@ -2,7 +2,7 @@ cx18-objs    := cx18-driver.o cx18-cards.o cx18-i2c.o cx18-firmware.o cx18-gpio.
         cx18-queue.o cx18-streams.o cx18-fileops.o cx18-ioctl.o cx18-controls.o \
         cx18-mailbox.o cx18-vbi.o cx18-audio.o cx18-video.o cx18-irq.o \
         cx18-av-core.o cx18-av-audio.o cx18-av-firmware.o cx18-av-vbi.o cx18-scb.o \
-        cx18-dvb.o
+        cx18-dvb.o cx18-io.o
 
 obj-$(CONFIG_VIDEO_CX18) += cx18.o
 
diff --git a/drivers/media/video/cx18/cx18-audio.c b/drivers/media/video/cx18/cx18-audio.c
index 6d5b94fc708..57beddf0af4 100644
--- a/drivers/media/video/cx18/cx18-audio.c
+++ b/drivers/media/video/cx18/cx18-audio.c
@@ -22,6 +22,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-i2c.h"
 #include "cx18-cards.h"
 #include "cx18-audio.h"
@@ -60,10 +61,10 @@ int cx18_audio_set_io(struct cx18 *cx)
         if (err)
                 return err;
 
-        val = read_reg(CX18_AUDIO_ENABLE) & ~0x30;
+        val = cx18_read_reg(cx, CX18_AUDIO_ENABLE) & ~0x30;
         val |= (audio_input > CX18_AV_AUDIO_SERIAL2) ? 0x20 :
                                         (audio_input << 4);
-        write_reg(val | 0xb00, CX18_AUDIO_ENABLE);
+        cx18_write_reg(cx, val | 0xb00, CX18_AUDIO_ENABLE);
         cx18_vapi(cx, CX18_APU_RESETAI, 1, 0);
         return 0;
 }
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 3b0a2c45060..d8626e35465 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -22,27 +22,29 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 
 int cx18_av_write(struct cx18 *cx, u16 addr, u8 value)
 {
-        u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3));
+        u32 reg = 0xc40000 + (addr & ~3);
         u32 mask = 0xff;
         int shift = (addr & 3) * 8;
+        u32 x = cx18_read_reg(cx, reg);
 
         x = (x & ~(mask << shift)) | ((u32)value << shift);
-        writel(x, cx->reg_mem + 0xc40000 + (addr & ~3));
+        cx18_write_reg(cx, x, reg);
         return 0;
 }
 
 int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value)
 {
-        writel(value, cx->reg_mem + 0xc40000 + addr);
+        cx18_write_reg(cx, value, 0xc40000 + addr);
         return 0;
 }
 
 u8 cx18_av_read(struct cx18 *cx, u16 addr)
 {
-        u32 x = readl(cx->reg_mem + 0xc40000 + (addr & ~3));
+        u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3));
         int shift = (addr & 3) * 8;
 
         return (x >> shift) & 0xff;
@@ -50,7 +52,7 @@ u8 cx18_av_read(struct cx18 *cx, u16 addr)
 
 u32 cx18_av_read4(struct cx18 *cx, u16 addr)
 {
-        return readl(cx->reg_mem + 0xc40000 + addr);
+        return cx18_read_reg(cx, 0xc40000 + addr);
 }
 
 int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask,
diff --git a/drivers/media/video/cx18/cx18-av-firmware.c b/drivers/media/video/cx18/cx18-av-firmware.c
index e996a4e3123..0488b629770 100644
--- a/drivers/media/video/cx18/cx18-av-firmware.c
+++ b/drivers/media/video/cx18/cx18-av-firmware.c
@@ -20,6 +20,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include <linux/firmware.h>
 
 #define CX18_AUDIO_ENABLE 0xc72014
@@ -119,10 +120,10 @@ int cx18_av_loadfw(struct cx18 *cx)
            have a name in the spec. */
         cx18_av_write4(cx, 0x09CC, 1);
 
-        v = read_reg(CX18_AUDIO_ENABLE);
-        /* If bit 11 is 1 */
+        v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
+        /* If bit 11 is 1, clear bit 10 */
         if (v & 0x800)
-                write_reg(v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Clear bit 10 */
+                cx18_write_reg(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE);
 
         /* Enable WW auto audio standard detection */
         v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 3dfceb360b5..d31e1ec8d14 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -22,6 +22,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-version.h"
 #include "cx18-cards.h"
 #include "cx18-i2c.h"
@@ -651,7 +652,7 @@ static int __devinit cx18_probe(struct pci_dev *dev,
                 goto free_mem;
         }
         cx->reg_mem = cx->enc_mem + CX18_REG_OFFSET;
-        devtype = read_reg(0xC72028);
+        devtype = cx18_read_reg(cx, 0xC72028);
         switch (devtype & 0xff000000) {
         case 0xff000000:
                 CX18_INFO("cx23418 revision %08x (A)\n", devtype);
@@ -897,8 +898,8 @@ static void cx18_remove(struct pci_dev *pci_dev)
                 cx18_stop_all_captures(cx);
 
         /* Interrupts */
-        sw1_irq_disable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
-        sw2_irq_disable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
+        cx18_sw1_irq_disable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
+        cx18_sw2_irq_disable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
 
         cx18_halt_firmware(cx);
 
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 7bdd2fcdf20..2cfdbe44582 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -457,47 +457,4 @@ void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv);
 /* First-open initialization: load firmware, etc. */
 int cx18_init_on_first_open(struct cx18 *cx);
 
-/* This is a PCI post thing, where if the pci register is not read, then
-   the write doesn't always take effect right away. By reading back the
-   register any pending PCI writes will be performed (in order), and so
-   you can be sure that the writes are guaranteed to be done.
-
-   Rarely needed, only in some timing sensitive cases.
-   Apparently if this is not done some motherboards seem
-   to kill the firmware and get into the broken state until computer is
-   rebooted. */
-#define write_sync(val, reg) \
-        do { writel(val, reg); readl(reg); } while (0)
-
-#define read_reg(reg) readl(cx->reg_mem + (reg))
-#define write_reg(val, reg) writel(val, cx->reg_mem + (reg))
-#define write_reg_sync(val, reg) \
-        do { write_reg(val, reg); read_reg(reg); } while (0)
-
-#define read_enc(addr) readl(cx->enc_mem + (u32)(addr))
-#define write_enc(val, addr) writel(val, cx->enc_mem + (u32)(addr))
-#define write_enc_sync(val, addr) \
-        do { write_enc(val, addr); read_enc(addr); } while (0)
-
-#define sw1_irq_enable(val) do { \
-        write_reg(val, SW1_INT_STATUS); \
-        write_reg(read_reg(SW1_INT_ENABLE_PCI) | (val), SW1_INT_ENABLE_PCI); \
-} while (0)
-
-#define sw1_irq_disable(val) \
-        write_reg(read_reg(SW1_INT_ENABLE_PCI) & ~(val), SW1_INT_ENABLE_PCI);
-
-#define sw2_irq_enable(val) do { \
-        write_reg(val, SW2_INT_STATUS); \
-        write_reg(read_reg(SW2_INT_ENABLE_PCI) | (val), SW2_INT_ENABLE_PCI); \
-} while (0)
-
-#define sw2_irq_disable(val) \
-        write_reg(read_reg(SW2_INT_ENABLE_PCI) & ~(val), SW2_INT_ENABLE_PCI);
-
-#define setup_page(addr) do { \
-    u32 val = read_reg(0xD000F8) & ~0x1f00; \
-    write_reg(val | (((addr) >> 17) & 0x1f00), 0xD000F8); \
-} while (0)
-
 #endif /* CX18_DRIVER_H */
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 1e420a804fc..afc694e7bdb 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -21,6 +21,7 @@
 
 #include "cx18-version.h"
 #include "cx18-dvb.h"
+#include "cx18-io.h"
 #include "cx18-streams.h"
 #include "cx18-cards.h"
 #include "s5h1409.h"
@@ -87,13 +88,13 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed)
         switch (cx->card->type) {
         case CX18_CARD_HVR_1600_ESMT:
         case CX18_CARD_HVR_1600_SAMSUNG:
-                v = read_reg(CX18_REG_DMUX_NUM_PORT_0_CONTROL);
+                v = cx18_read_reg(cx, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
                 v |= 0x00400000; /* Serial Mode */
                 v |= 0x00002000; /* Data Length - Byte */
                 v |= 0x00010000; /* Error - Polarity */
                 v |= 0x00020000; /* Error - Passthru */
                 v |= 0x000c0000; /* Error - Ignore */
-                write_reg(v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
+                cx18_write_reg(cx, v, CX18_REG_DMUX_NUM_PORT_0_CONTROL);
                 break;
 
         default:
diff --git a/drivers/media/video/cx18/cx18-firmware.c b/drivers/media/video/cx18/cx18-firmware.c
index 78fadd2ada5..51534428cd0 100644
--- a/drivers/media/video/cx18/cx18-firmware.c
+++ b/drivers/media/video/cx18/cx18-firmware.c
@@ -20,6 +20,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-scb.h"
 #include "cx18-irq.h"
 #include "cx18-firmware.h"
@@ -113,11 +114,11 @@ static int load_cpu_fw_direct(const char *fn, u8 __iomem *mem, struct cx18 *cx)
         src = (const u32 *)fw->data;
 
         for (i = 0; i < fw->size; i += 4096) {
-                setup_page(i);
+                cx18_setup_page(cx, i);
                 for (j = i; j < fw->size && j < i + 4096; j += 4) {
                         /* no need for endianness conversion on the ppc */
-                        __raw_writel(*src, dst);
-                        if (__raw_readl(dst) != *src) {
+                        cx18_raw_writel(cx, *src, dst);
+                        if (cx18_raw_readl(cx, dst) != *src) {
                                 CX18_ERR("Mismatch at offset %x\n", i);
                                 release_firmware(fw);
                                 return -EIO;
@@ -170,12 +171,15 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx)
                 if (offset + seghdr.size > sz)
                         break;
                 for (i = 0; i < seghdr.size; i += 4096) {
-                        setup_page(offset + i);
+                        cx18_setup_page(cx, offset + i);
                         for (j = i; j < seghdr.size && j < i + 4096; j += 4) {
                                 /* no need for endianness conversion on the ppc */
-                                __raw_writel(src[(offset + j) / 4], dst + seghdr.addr + j);
-                                if (__raw_readl(dst + seghdr.addr + j) != src[(offset + j) / 4]) {
-                                        CX18_ERR("Mismatch at offset %x\n", offset + j);
+                                cx18_raw_writel(cx, src[(offset + j) / 4],
+                                                dst + seghdr.addr + j);
+                                if (cx18_raw_readl(cx, dst + seghdr.addr + j)
+                                    != src[(offset + j) / 4]) {
+                                        CX18_ERR("Mismatch at offset %x\n",
+                                                 offset + j);
                                         release_firmware(fw);
                                         return -EIO;
                                 }
@@ -189,43 +193,45 @@ static int load_apu_fw_direct(const char *fn, u8 __iomem *dst, struct cx18 *cx)
         size = fw->size;
         release_firmware(fw);
         /* Clear bit0 for APU to start from 0 */
-        write_reg(read_reg(0xc72030) & ~1, 0xc72030);
+        cx18_write_reg(cx, cx18_read_reg(cx, 0xc72030) & ~1, 0xc72030);
         return size;
 }
 
 void cx18_halt_firmware(struct cx18 *cx)
 {
         CX18_DEBUG_INFO("Preparing for firmware halt.\n");
-        write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
-        write_reg(0x00020002, CX18_ADEC_CONTROL);
+        cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
+        cx18_write_reg(cx, 0x00020002, CX18_ADEC_CONTROL);
 }
 
 void cx18_init_power(struct cx18 *cx, int lowpwr)
 {
         /* power-down Spare and AOM PLLs */
         /* power-up fast, slow and mpeg PLLs */
-        write_reg(0x00000008, CX18_PLL_POWER_DOWN);
+        cx18_write_reg(cx, 0x00000008, CX18_PLL_POWER_DOWN);
 
         /* ADEC out of sleep */
-        write_reg(0x00020000, CX18_ADEC_CONTROL);
+        cx18_write_reg(cx, 0x00020000, CX18_ADEC_CONTROL);
 
         /* The fast clock is at 200/245 MHz */
-        write_reg(lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT);
-        write_reg(lowpwr ? 0x1EFBF37 : 0x038E3D7, CX18_FAST_CLOCK_PLL_FRAC);
+        cx18_write_reg(cx, lowpwr ? 0xD : 0x11, CX18_FAST_CLOCK_PLL_INT);
+        cx18_write_reg(cx, lowpwr ? 0x1EFBF37 : 0x038E3D7,
+                                                CX18_FAST_CLOCK_PLL_FRAC);
 
-        write_reg(2, CX18_FAST_CLOCK_PLL_POST);
-        write_reg(1, CX18_FAST_CLOCK_PLL_PRESCALE);
-        write_reg(4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH);
+        cx18_write_reg(cx, 2, CX18_FAST_CLOCK_PLL_POST);
+        cx18_write_reg(cx, 1, CX18_FAST_CLOCK_PLL_PRESCALE);
+        cx18_write_reg(cx, 4, CX18_FAST_CLOCK_PLL_ADJUST_BANDWIDTH);
 
         /* set slow clock to 125/120 MHz */
-        write_reg(lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT);
-        write_reg(lowpwr ? 0xEBAF05 : 0x18618A8, CX18_SLOW_CLOCK_PLL_FRAC);
-        write_reg(4, CX18_SLOW_CLOCK_PLL_POST);
+        cx18_write_reg(cx, lowpwr ? 0x11 : 0x10, CX18_SLOW_CLOCK_PLL_INT);
+        cx18_write_reg(cx, lowpwr ? 0xEBAF05 : 0x18618A8,
+                                                CX18_SLOW_CLOCK_PLL_FRAC);
+        cx18_write_reg(cx, 4, CX18_SLOW_CLOCK_PLL_POST);
 
         /* mpeg clock pll 54MHz */
-        write_reg(0xF, CX18_MPEG_CLOCK_PLL_INT);
-        write_reg(0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC);
-        write_reg(8, CX18_MPEG_CLOCK_PLL_POST);
+        cx18_write_reg(cx, 0xF, CX18_MPEG_CLOCK_PLL_INT);
+        cx18_write_reg(cx, 0x2BCFEF, CX18_MPEG_CLOCK_PLL_FRAC);
+        cx18_write_reg(cx, 8, CX18_MPEG_CLOCK_PLL_POST);
 
         /* Defaults */
         /* APU = SC or SC/2 = 125/62.5 */
@@ -242,81 +248,84 @@ void cx18_init_power(struct cx18 *cx, int lowpwr)
         /* VFC = disabled */
         /* USB = disabled */
 
-        write_reg(lowpwr ? 0xFFFF0020 : 0x00060004, CX18_CLOCK_SELECT1);
-        write_reg(lowpwr ? 0xFFFF0004 : 0x00060006, CX18_CLOCK_SELECT2);
+        cx18_write_reg(cx, lowpwr ? 0xFFFF0020 : 0x00060004,
+                                                        CX18_CLOCK_SELECT1);
+        cx18_write_reg(cx, lowpwr ? 0xFFFF0004 : 0x00060006,
+                                                        CX18_CLOCK_SELECT2);
 
-        write_reg(0xFFFF0002, CX18_HALF_CLOCK_SELECT1);
-        write_reg(0xFFFF0104, CX18_HALF_CLOCK_SELECT2);
+        cx18_write_reg(cx, 0xFFFF0002, CX18_HALF_CLOCK_SELECT1);
+        cx18_write_reg(cx, 0xFFFF0104, CX18_HALF_CLOCK_SELECT2);
 
-        write_reg(0xFFFF9026, CX18_CLOCK_ENABLE1);
-        write_reg(0xFFFF3105, CX18_CLOCK_ENABLE2);
+        cx18_write_reg(cx, 0xFFFF9026, CX18_CLOCK_ENABLE1);
+        cx18_write_reg(cx, 0xFFFF3105, CX18_CLOCK_ENABLE2);
 }
 
 void cx18_init_memory(struct cx18 *cx)
 {
         cx18_msleep_timeout(10, 0);
-        write_reg(0x10000, CX18_DDR_SOFT_RESET);
+        cx18_write_reg(cx, 0x10000, CX18_DDR_SOFT_RESET);
         cx18_msleep_timeout(10, 0);
 
-        write_reg(cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG);
+        cx18_write_reg(cx, cx->card->ddr.chip_config, CX18_DDR_CHIP_CONFIG);
 
         cx18_msleep_timeout(10, 0);
 
-        write_reg(cx->card->ddr.refresh, CX18_DDR_REFRESH);
-        write_reg(cx->card->ddr.timing1, CX18_DDR_TIMING1);
-        write_reg(cx->card->ddr.timing2, CX18_DDR_TIMING2);
+        cx18_write_reg(cx, cx->card->ddr.refresh, CX18_DDR_REFRESH);
+        cx18_write_reg(cx, cx->card->ddr.timing1, CX18_DDR_TIMING1);
+        cx18_write_reg(cx, cx->card->ddr.timing2, CX18_DDR_TIMING2);
 
         cx18_msleep_timeout(10, 0);
 
         /* Initialize DQS pad time */
-        write_reg(cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE);
-        write_reg(cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS);
+        cx18_write_reg(cx, cx->card->ddr.tune_lane, CX18_DDR_TUNE_LANE);
+        cx18_write_reg(cx, cx->card->ddr.initial_emrs, CX18_DDR_INITIAL_EMRS);
 
         cx18_msleep_timeout(10, 0);
 
-        write_reg(0x20000, CX18_DDR_SOFT_RESET);
+        cx18_write_reg(cx, 0x20000, CX18_DDR_SOFT_RESET);
         cx18_msleep_timeout(10, 0);
 
         /* use power-down mode when idle */
-        write_reg(0x00000010, CX18_DDR_POWER_REG);
-
-        write_reg(0x10001, CX18_REG_BUS_TIMEOUT_EN);
-
-        write_reg(0x48, CX18_DDR_MB_PER_ROW_7);
-        write_reg(0xE0000, CX18_DDR_BASE_63_ADDR);
-
-        write_reg(0x00000101, CX18_WMB_CLIENT02);  /* AO */
-        write_reg(0x00000101, CX18_WMB_CLIENT09);  /* AI2 */
-        write_reg(0x00000101, CX18_WMB_CLIENT05);  /* VIM1 */
-        write_reg(0x00000101, CX18_WMB_CLIENT06);  /* AI1 */
-        write_reg(0x00000101, CX18_WMB_CLIENT07);  /* 3D comb */
-        write_reg(0x00000101, CX18_WMB_CLIENT10);  /* ME */
-        write_reg(0x00000101, CX18_WMB_CLIENT12);  /* ENC */
-        write_reg(0x00000101, CX18_WMB_CLIENT13);  /* PK */
-        write_reg(0x00000101, CX18_WMB_CLIENT11);  /* RC */
-        write_reg(0x00000101, CX18_WMB_CLIENT14);  /* AVO */
+        cx18_write_reg(cx, 0x00000010, CX18_DDR_POWER_REG);
+
+        cx18_write_reg(cx, 0x10001, CX18_REG_BUS_TIMEOUT_EN);
+
+        cx18_write_reg(cx, 0x48, CX18_DDR_MB_PER_ROW_7);
+        cx18_write_reg(cx, 0xE0000, CX18_DDR_BASE_63_ADDR);
+
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT02);  /* AO */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT09);  /* AI2 */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT05);  /* VIM1 */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT06);  /* AI1 */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT07);  /* 3D comb */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT10);  /* ME */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT12);  /* ENC */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT13);  /* PK */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT11);  /* RC */
+        cx18_write_reg(cx, 0x00000101, CX18_WMB_CLIENT14);  /* AVO */
 }
 
 int cx18_firmware_init(struct cx18 *cx)
 {
         /* Allow chip to control CLKRUN */
-        write_reg(0x5, CX18_DSP0_INTERRUPT_MASK);
+        cx18_write_reg(cx, 0x5, CX18_DSP0_INTERRUPT_MASK);
 
-        write_reg(0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
+        cx18_write_reg(cx, 0x000F000F, CX18_PROC_SOFT_RESET); /* stop the fw */
 
         cx18_msleep_timeout(1, 0);
 
-        sw1_irq_enable(IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
-        sw2_irq_enable(IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
+        cx18_sw1_irq_enable(cx, IRQ_CPU_TO_EPU | IRQ_APU_TO_EPU);
+        cx18_sw2_irq_enable(cx, IRQ_CPU_TO_EPU_ACK | IRQ_APU_TO_EPU_ACK);
 
         /* Only if the processor is not running */
-        if (read_reg(CX18_PROC_SOFT_RESET) & 8) {
+        if (cx18_read_reg(cx, CX18_PROC_SOFT_RESET) & 8) {
                 int sz = load_apu_fw_direct("v4l-cx23418-apu.fw",
                                cx->enc_mem, cx);
 
-                write_enc(0xE51FF004, 0);
-                write_enc(0xa00000, 4);  /* todo: not hardcoded */
-                write_reg(0x00010000, CX18_PROC_SOFT_RESET); /* Start APU */
+                cx18_write_enc(cx, 0xE51FF004, 0);
+                cx18_write_enc(cx, 0xa00000, 4);  /* todo: not hardcoded */
+                /* Start APU */
+                cx18_write_reg(cx, 0x00010000, CX18_PROC_SOFT_RESET);
                 cx18_msleep_timeout(500, 0);
 
                 sz = sz <= 0 ? sz : load_cpu_fw_direct("v4l-cx23418-cpu.fw",
@@ -326,9 +335,10 @@ int cx18_firmware_init(struct cx18 *cx)
                         int retries = 0;
 
                         /* start the CPU */
-                        write_reg(0x00080000, CX18_PROC_SOFT_RESET);
+                        cx18_write_reg(cx, 0x00080000, CX18_PROC_SOFT_RESET);
                         while (retries++ < 50) { /* Loop for max 500mS */
-                                if ((read_reg(CX18_PROC_SOFT_RESET) & 1) == 0)
+                                if ((cx18_read_reg(cx, CX18_PROC_SOFT_RESET)
+                                     & 1) == 0)
                                         break;
                                 cx18_msleep_timeout(10, 0);
                         }
@@ -342,6 +352,6 @@ int cx18_firmware_init(struct cx18 *cx)
                         return -EIO;
         }
         /* initialize GPIO */
-        write_reg(0x14001400, 0xC78110);
+        cx18_write_reg(cx, 0x14001400, 0xC78110);
         return 0;
 }
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index 3d495dba498..3bdffbf7a96 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -22,6 +22,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-cards.h"
 #include "cx18-gpio.h"
 #include "tuner-xc2028.h"
@@ -49,11 +50,11 @@ static void gpio_write(struct cx18 *cx)
         u32 dir = cx->gpio_dir;
         u32 val = cx->gpio_val;
 
-        write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
-        write_reg(((dir & 0xffff) << 16) | (val & 0xffff),
+        cx18_write_reg(cx, (dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
+        cx18_write_reg(cx, ((dir & 0xffff) << 16) | (val & 0xffff),
                         CX18_REG_GPIO_OUT1);
-        write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2);
-        write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
+        cx18_write_reg(cx, dir & 0xffff0000, CX18_REG_GPIO_DIR2);
+        cx18_write_reg_sync(cx, (dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
                         CX18_REG_GPIO_OUT2);
 }
 
@@ -141,8 +142,10 @@ void cx18_gpio_init(struct cx18 *cx)
         }
 
         CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n",
-                   read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2),
-                   read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2));
+                        cx18_read_reg(cx, CX18_REG_GPIO_DIR1),
+                        cx18_read_reg(cx, CX18_REG_GPIO_DIR2),
+                        cx18_read_reg(cx, CX18_REG_GPIO_OUT1),
+                        cx18_read_reg(cx, CX18_REG_GPIO_OUT2));
 
         gpio_write(cx);
         mutex_unlock(&cx->gpio_lock);
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index 7d8fb25baae..aa09e557b19 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -22,6 +22,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-cards.h"
 #include "cx18-gpio.h"
 #include "cx18-av-core.h"
@@ -156,12 +157,12 @@ static void cx18_setscl(void *data, int state)
         struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx;
         int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
         u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR;
-        u32 r = read_reg(addr);
+        u32 r = cx18_read_reg(cx, addr);
 
         if (state)
-                write_reg_sync(r | SETSCL_BIT, addr);
+                cx18_write_reg_sync(cx, r | SETSCL_BIT, addr);
         else
-                write_reg_sync(r & ~SETSCL_BIT, addr);
+                cx18_write_reg_sync(cx, r & ~SETSCL_BIT, addr);
 }
 
 static void cx18_setsda(void *data, int state)
@@ -169,12 +170,12 @@ static void cx18_setsda(void *data, int state)
         struct cx18 *cx = ((struct cx18_i2c_algo_callback_data *)data)->cx;
         int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
         u32 addr = bus_index ? CX18_REG_I2C_2_WR : CX18_REG_I2C_1_WR;
-        u32 r = read_reg(addr);
+        u32 r = cx18_read_reg(cx, addr);
 
         if (state)
-                write_reg_sync(r | SETSDL_BIT, addr);
+                cx18_write_reg_sync(cx, r | SETSDL_BIT, addr);
         else
-                write_reg_sync(r & ~SETSDL_BIT, addr);
+                cx18_write_reg_sync(cx, r & ~SETSDL_BIT, addr);
 }
 
 static int cx18_getscl(void *data)
@@ -183,7 +184,7 @@ static int cx18_getscl(void *data)
         int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
         u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD;
 
-        return read_reg(addr) & GETSCL_BIT;
+        return cx18_read_reg(cx, addr) & GETSCL_BIT;
 }
 
 static int cx18_getsda(void *data)
@@ -192,7 +193,7 @@ static int cx18_getsda(void *data)
         int bus_index = ((struct cx18_i2c_algo_callback_data *)data)->bus_index;
         u32 addr = bus_index ? CX18_REG_I2C_2_RD : CX18_REG_I2C_1_RD;
 
-        return read_reg(addr) & GETSDL_BIT;
+        return cx18_read_reg(cx, addr) & GETSDL_BIT;
 }
 
 /* template for i2c-bit-algo */
@@ -392,29 +393,33 @@ int init_cx18_i2c(struct cx18 *cx)
                 cx->i2c_adap[i].dev.parent = &cx->dev->dev;
         }
 
-        if (read_reg(CX18_REG_I2C_2_WR) != 0x0003c02f) {
+        if (cx18_read_reg(cx, CX18_REG_I2C_2_WR) != 0x0003c02f) {
                 /* Reset/Unreset I2C hardware block */
-                write_reg(0x10000000, 0xc71004); /* Clock select 220MHz */
-                write_reg_sync(0x10001000, 0xc71024); /* Clock Enable */
+                /* Clock select 220MHz */
+                cx18_write_reg(cx, 0x10000000, 0xc71004);
+                /* Clock Enable */
+                cx18_write_reg_sync(cx, 0x10001000, 0xc71024);
         }
         /* courtesy of Steven Toth <stoth@hauppauge.com> */
-        write_reg_sync(0x00c00000, 0xc7001c);
+        cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c);
         mdelay(10);
-        write_reg_sync(0x00c000c0, 0xc7001c);
+        cx18_write_reg_sync(cx, 0x00c000c0, 0xc7001c);
         mdelay(10);
-        write_reg_sync(0x00c00000, 0xc7001c);
+        cx18_write_reg_sync(cx, 0x00c00000, 0xc7001c);
         mdelay(10);
 
-        write_reg_sync(0x00c00000, 0xc730c8); /* Set to edge-triggered intrs. */
-        write_reg_sync(0x00c00000, 0xc730c4); /* Clear any stale intrs */
+        /* Set to edge-triggered intrs. */
+        cx18_write_reg_sync(cx, 0x00c00000, 0xc730c8);
+        /* Clear any stale intrs */
+        cx18_write_reg_sync(cx, 0x00c00000, 0xc730c4);
 
         /* Hw I2C1 Clock Freq ~100kHz */
-        write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_1_WR);
+        cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_1_WR);
         cx18_setscl(&cx->i2c_algo_cb_data[0], 1);
         cx18_setsda(&cx->i2c_algo_cb_data[0], 1);
 
         /* Hw I2C2 Clock Freq ~100kHz */
-        write_reg_sync(0x00021c0f & ~4, CX18_REG_I2C_2_WR);
+        cx18_write_reg_sync(cx, 0x00021c0f & ~4, CX18_REG_I2C_2_WR);
         cx18_setscl(&cx->i2c_algo_cb_data[1], 1);
         cx18_setsda(&cx->i2c_algo_cb_data[1], 1);
 
@@ -428,8 +433,10 @@ void exit_cx18_i2c(struct cx18 *cx)
 {
         int i;
         CX18_DEBUG_I2C("i2c exit\n");
-        write_reg(read_reg(CX18_REG_I2C_1_WR) | 4, CX18_REG_I2C_1_WR);
-        write_reg(read_reg(CX18_REG_I2C_2_WR) | 4, CX18_REG_I2C_2_WR);
+        cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_1_WR) | 4,
+                                                        CX18_REG_I2C_1_WR);
+        cx18_write_reg(cx, cx18_read_reg(cx, CX18_REG_I2C_2_WR) | 4,
+                                                        CX18_REG_I2C_2_WR);
 
         for (i = 0; i < 2; i++) {
                 i2c_del_adapter(&cx->i2c_adap[i]);
diff --git a/drivers/media/video/cx18/cx18-io.c b/drivers/media/video/cx18/cx18-io.c
new file mode 100644
index 00000000000..c53d9b6e5e4
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-io.c
@@ -0,0 +1,142 @@
+/*
+ *  cx18 driver PCI memory mapped IO access routines
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ *  02111-1307  USA
+ */
+
+#include "cx18-driver.h"
+#include "cx18-irq.h"
+
+void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr)
+{
+        __raw_writel(val, addr);
+}
+
+u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr)
+{
+        return __raw_readl(addr);
+}
+
+u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr)
+{
+        writel(val, addr);
+        return readl(addr);
+}
+
+void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr)
+{
+        writel(val, addr);
+}
+
+u32 cx18_readl(struct cx18 *cx, const void __iomem *addr)
+{
+        return readl(addr);
+}
+
+
+/* Access "register" region of CX23418 memory mapped I/O */
+u32 cx18_read_reg(struct cx18 *cx, u32 reg)
+{
+        return readl(cx->reg_mem + reg);
+}
+
+void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg)
+{
+        writel(val, cx->reg_mem + reg);
+}
+
+u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg)
+{
+        return cx18_write_sync(cx, val, cx->reg_mem + reg);
+}
+
+/* Access "encoder memory" region of CX23418 memory mapped I/O */
+u32 cx18_read_enc(struct cx18 *cx, u32 addr)
+{
+        return readl(cx->enc_mem + addr);
+}
+
+void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr)
+{
+        writel(val, cx->enc_mem + addr);
+}
+
+u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr)
+{
+        return cx18_write_sync(cx, val, cx->enc_mem + addr);
+}
+
+void cx18_memcpy_fromio(struct cx18 *cx, void *to,
+                        const void __iomem *from, unsigned int len)
+{
+        memcpy_fromio(to, from, len);
+}
+
+void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count)
+{
+        memset_io(addr, val, count);
+}
+
+void cx18_sw1_irq_enable(struct cx18 *cx, u32 val)
+{
+        u32 r;
+        cx18_write_reg(cx, val, SW1_INT_STATUS);
+        r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
+        cx18_write_reg(cx, r | val, SW1_INT_ENABLE_PCI);
+}
+
+void cx18_sw1_irq_disable(struct cx18 *cx, u32 val)
+{
+        u32 r;
+        r = cx18_read_reg(cx, SW1_INT_ENABLE_PCI);
+        cx18_write_reg(cx, r & ~val, SW1_INT_ENABLE_PCI);
+}
+
+void cx18_sw2_irq_enable(struct cx18 *cx, u32 val)
+{
+        u32 r;
+        cx18_write_reg(cx, val, SW2_INT_STATUS);
+        r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
+        cx18_write_reg(cx, r | val, SW2_INT_ENABLE_PCI);
+}
+
+void cx18_sw2_irq_disable(struct cx18 *cx, u32 val)
+{
+        u32 r;
+        r = cx18_read_reg(cx, SW2_INT_ENABLE_PCI);
+        cx18_write_reg(cx, r & ~val, SW2_INT_ENABLE_PCI);
+}
+
+void cx18_setup_page(struct cx18 *cx, u32 addr)
+{
+        u32 val;
+        val = cx18_read_reg(cx, 0xD000F8);
+        val = (val & ~0x1f00) | ((addr >> 17) & 0x1f00);
+        cx18_write_reg(cx, val, 0xD000F8);
+}
+
+/* Tries to recover from the CX23418 responding improperly on the PCI bus */
+int cx18_pci_try_recover(struct cx18 *cx)
+{
+        u16 status;
+
+        pci_read_config_word(cx->dev, PCI_STATUS, &status);
+        pci_write_config_word(cx->dev, PCI_STATUS, status);
+        return 0;
+}
diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h
new file mode 100644
index 00000000000..7c08c0add49
--- /dev/null
+++ b/drivers/media/video/cx18/cx18-io.h
@@ -0,0 +1,69 @@
+/*
+ *  cx18 driver PCI memory mapped IO access routines
+ *
+ *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
+ *  Copyright (C) 2008  Andy Walls <awalls@radix.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA
+ *  02111-1307  USA
+ */
+
+#ifndef CX18_IO_H
+#define CX18_IO_H
+
+#include "cx18-driver.h"
+
+/* This is a PCI post thing, where if the pci register is not read, then
+   the write doesn't always take effect right away. By reading back the
+   register any pending PCI writes will be performed (in order), and so
+   you can be sure that the writes are guaranteed to be done.
+
+   Rarely needed, only in some timing sensitive cases.
+   Apparently if this is not done some motherboards seem
+   to kill the firmware and get into the broken state until computer is
+   rebooted. */
+u32 cx18_write_sync(struct cx18 *cx, u32 val, void __iomem *addr);
+
+void cx18_writel(struct cx18 *cx, u32 val, void __iomem *addr);
+u32 cx18_readl(struct cx18 *cx, const void __iomem *addr);
+
+/* No endiannes conversion calls */
+void cx18_raw_writel(struct cx18 *cx, u32 val, void __iomem *addr);
+u32 cx18_raw_readl(struct cx18 *cx, const void __iomem *addr);
+
+/* Access "register" region of CX23418 memory mapped I/O */
+u32 cx18_read_reg(struct cx18 *cx, u32 reg);
+void cx18_write_reg(struct cx18 *cx, u32 val, u32 reg);
+u32 cx18_write_reg_sync(struct cx18 *cx, u32 val, u32 reg);
+
+/* Access "encoder memory" region of CX23418 memory mapped I/O */
+u32 cx18_read_enc(struct cx18 *cx, u32 addr);
+void cx18_write_enc(struct cx18 *cx, u32 val, u32 addr);
+u32 cx18_write_enc_sync(struct cx18 *cx, u32 val, u32 addr);
+
+void cx18_memcpy_fromio(struct cx18 *cx, void *to,
+                        const void __iomem *from, unsigned int len);
+void cx18_memset_io(struct cx18 *cx, void __iomem *addr, int val, size_t count);
+
+void cx18_sw1_irq_enable(struct cx18 *cx, u32 val);
+void cx18_sw1_irq_disable(struct cx18 *cx, u32 val);
+void cx18_sw2_irq_enable(struct cx18 *cx, u32 val);
+void cx18_sw2_irq_disable(struct cx18 *cx, u32 val);
+void cx18_setup_page(struct cx18 *cx, u32 addr);
+
+/* Tries to recover from the CX23418 responding improperly on the PCI bus */
+int cx18_pci_try_recover(struct cx18 *cx);
+
+#endif /* CX18_IO_H */
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 84507a39f2b..8b26b3fefb1 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -22,6 +22,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-version.h"
 #include "cx18-mailbox.h"
 #include "cx18-i2c.h"
@@ -286,9 +287,9 @@ static int cx18_cxc(struct cx18 *cx, unsigned int cmd, void *arg)
 
         spin_lock_irqsave(&cx18_cards_lock, flags);
         if (cmd == VIDIOC_DBG_G_REGISTER)
-                regs->val = read_enc(regs->reg);
+                regs->val = cx18_read_enc(cx, regs->reg);
         else
-                write_enc(regs->val, regs->reg);
+                cx18_write_enc(cx, regs->val, regs->reg);
         spin_unlock_irqrestore(&cx18_cards_lock, flags);
         return 0;
 }
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index ab218315c84..55a50a2b048 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -20,6 +20,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-firmware.h"
 #include "cx18-fileops.h"
 #include "cx18-queue.h"
@@ -60,8 +61,8 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
         if (mb->args[2] != 1)
                 CX18_WARN("Ack struct = %d for %s\n",
                         mb->args[2], s->name);
-        id = read_enc(off);
-        buf = cx18_queue_get_buf_irq(s, id, read_enc(off + 4));
+        id = cx18_read_enc(cx, off);
+        buf = cx18_queue_get_buf_irq(s, id, cx18_read_enc(cx, off + 4));
         CX18_DEBUG_HI_DMA("DMA DONE for %s (buffer %d)\n", s->name, id);
         if (buf) {
                 cx18_buf_sync_for_cpu(s, buf);
@@ -81,7 +82,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb)
                         set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
         } else {
                 CX18_WARN("Could not find buf %d for stream %s\n",
-                                read_enc(off), s->name);
+                                cx18_read_enc(cx, off), s->name);
         }
         mb->error = 0;
         mb->cmd = 0;
@@ -97,8 +98,8 @@ static void epu_debug(struct cx18 *cx, struct cx18_mailbox *mb)
         char *p;
 
         if (mb->args[1]) {
-                setup_page(mb->args[1]);
-                memcpy_fromio(str, cx->enc_mem + mb->args[1], 252);
+                cx18_setup_page(cx, mb->args[1]);
+                cx18_memcpy_fromio(cx, str, cx->enc_mem + mb->args[1], 252);
                 str[252] = 0;
         }
         cx18_mb_ack(cx, mb);
@@ -113,7 +114,7 @@ static void hpu_cmd(struct cx18 *cx, u32 sw1)
         struct cx18_mailbox mb;
 
         if (sw1 & IRQ_CPU_TO_EPU) {
-                memcpy_fromio(&mb, &cx->scb->cpu2epu_mb, sizeof(mb));
+                cx18_memcpy_fromio(cx, &mb, &cx->scb->cpu2epu_mb, sizeof(mb));
                 mb.error = 0;
 
                 switch (mb.cmd) {
@@ -141,16 +142,16 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
 
         spin_lock(&cx->dma_reg_lock);
 
-        hw2_mask = read_reg(HW2_INT_MASK5_PCI);
-        hw2 = read_reg(HW2_INT_CLR_STATUS) & hw2_mask;
-        sw2_mask = read_reg(SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK;
-        sw2 = read_reg(SW2_INT_STATUS) & sw2_mask;
-        sw1_mask = read_reg(SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU;
-        sw1 = read_reg(SW1_INT_STATUS) & sw1_mask;
+        hw2_mask = cx18_read_reg(cx, HW2_INT_MASK5_PCI);
+        hw2 = cx18_read_reg(cx, HW2_INT_CLR_STATUS) & hw2_mask;
+        sw2_mask = cx18_read_reg(cx, SW2_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU_ACK;
+        sw2 = cx18_read_reg(cx, SW2_INT_STATUS) & sw2_mask;
+        sw1_mask = cx18_read_reg(cx, SW1_INT_ENABLE_PCI) | IRQ_EPU_TO_HPU;
+        sw1 = cx18_read_reg(cx, SW1_INT_STATUS) & sw1_mask;
 
-        write_reg(sw2&sw2_mask, SW2_INT_STATUS);
-        write_reg(sw1&sw1_mask, SW1_INT_STATUS);
-        write_reg(hw2&hw2_mask, HW2_INT_CLR_STATUS);
+        cx18_write_reg(cx, sw2&sw2_mask, SW2_INT_STATUS);
+        cx18_write_reg(cx, sw1&sw1_mask, SW1_INT_STATUS);
+        cx18_write_reg(cx, hw2&hw2_mask, HW2_INT_CLR_STATUS);
 
         if (sw1 || sw2 || hw2)
                 CX18_DEBUG_HI_IRQ("SW1: %x  SW2: %x  HW2: %x\n", sw1, sw2, hw2);
@@ -161,15 +162,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id)
         */
 
         if (sw2) {
-                if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) |
-                           readl(&cx->scb->cpu2epu_irq_ack)))
+                if (sw2 & (cx18_readl(cx, &cx->scb->cpu2hpu_irq_ack) |
+                           cx18_readl(cx, &cx->scb->cpu2epu_irq_ack)))
                         wake_up(&cx->mb_cpu_waitq);
-                if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) |
-                           readl(&cx->scb->apu2epu_irq_ack)))
+                if (sw2 & (cx18_readl(cx, &cx->scb->apu2hpu_irq_ack) |
+                           cx18_readl(cx, &cx->scb->apu2epu_irq_ack)))
                         wake_up(&cx->mb_apu_waitq);
-                if (sw2 & readl(&cx->scb->epu2hpu_irq_ack))
+                if (sw2 & cx18_readl(cx, &cx->scb->epu2hpu_irq_ack))
                         wake_up(&cx->mb_epu_waitq);
-                if (sw2 & readl(&cx->scb->hpu2epu_irq_ack))
+                if (sw2 & cx18_readl(cx, &cx->scb->hpu2epu_irq_ack))
                         wake_up(&cx->mb_hpu_waitq);
         }
 
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 1b9fbf9a6bc..9d18dd22de7 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -22,6 +22,7 @@
 #include <stdarg.h>
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-scb.h"
 #include "cx18-irq.h"
 #include "cx18-mailbox.h"
@@ -106,20 +107,20 @@ static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu
         switch (rpu) {
         case APU:
                 mb = &cx->scb->epu2apu_mb;
-                *state = readl(&cx->scb->apu_state);
-                *irq = readl(&cx->scb->epu2apu_irq);
+                *state = cx18_readl(cx, &cx->scb->apu_state);
+                *irq = cx18_readl(cx, &cx->scb->epu2apu_irq);
                 break;
 
         case CPU:
                 mb = &cx->scb->epu2cpu_mb;
-                *state = readl(&cx->scb->cpu_state);
-                *irq = readl(&cx->scb->epu2cpu_irq);
+                *state = cx18_readl(cx, &cx->scb->cpu_state);
+                *irq = cx18_readl(cx, &cx->scb->epu2cpu_irq);
                 break;
 
         case HPU:
                 mb = &cx->scb->epu2hpu_mb;
-                *state = readl(&cx->scb->hpu_state);
-                *irq = readl(&cx->scb->epu2hpu_irq);
+                *state = cx18_readl(cx, &cx->scb->hpu_state);
+                *irq = cx18_readl(cx, &cx->scb->epu2hpu_irq);
                 break;
         }
 
@@ -127,8 +128,8 @@ static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu
                 return mb;
 
         do {
-                *req = readl(&mb->request);
-                ack = readl(&mb->ack);
+                *req = cx18_readl(cx, &mb->request);
+                ack = cx18_readl(cx, &mb->ack);
                 wait_count++;
         } while (*req != ack && wait_count < 600);
 
@@ -173,9 +174,9 @@ long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
                 return -EINVAL;
         }
 
-        setup_page(SCB_OFFSET);
-        write_sync(mb->request, &ack_mb->ack);
-        write_reg(ack_irq, SW2_INT_SET);
+        cx18_setup_page(cx, SCB_OFFSET);
+        cx18_write_sync(cx, mb->request, &ack_mb->ack);
+        cx18_write_reg(cx, ack_irq, SW2_INT_SET);
         return 0;
 }
 
@@ -200,7 +201,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
                 CX18_DEBUG_HI_API("%s\n", info->name);
         else
                 CX18_DEBUG_API("%s\n", info->name);
-        setup_page(SCB_OFFSET);
+        cx18_setup_page(cx, SCB_OFFSET);
         mb = cx18_mb_is_complete(cx, info->rpu, &state, &irq, &req);
 
         if (mb == NULL) {
@@ -209,11 +210,11 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
         }
 
         oldreq = req - 1;
-        writel(cmd, &mb->cmd);
+        cx18_writel(cx, cmd, &mb->cmd);
         for (i = 0; i < args; i++)
-                writel(data[i], &mb->args[i]);
-        writel(0, &mb->error);
-        writel(req, &mb->request);
+                cx18_writel(cx, data[i], &mb->args[i]);
+        cx18_writel(cx, 0, &mb->error);
+        cx18_writel(cx, req, &mb->request);
 
         switch (info->rpu) {
         case APU: waitq = &cx->mb_apu_waitq; break;
@@ -224,9 +225,10 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
         }
         if (info->flags & API_FAST)
                 timeout /= 2;
-        write_reg(irq, SW1_INT_SET);
+        cx18_write_reg(cx, irq, SW1_INT_SET);
 
-        while (!sig && readl(&mb->ack) != readl(&mb->request) && cnt < 660) {
+        while (!sig && cx18_readl(cx, &mb->ack) != cx18_readl(cx, &mb->request)
+               && cnt < 660) {
                 if (cnt > 200 && !in_atomic())
                         sig = cx18_msleep_timeout(10, 1);
                 cnt++;
@@ -234,13 +236,13 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[])
         if (sig)
                 return -EINTR;
         if (cnt == 660) {
-                writel(oldreq, &mb->request);
+                cx18_writel(cx, oldreq, &mb->request);
                 CX18_ERR("mb %s failed\n", info->name);
                 return -EINVAL;
         }
         for (i = 0; i < MAX_MB_ARGUMENTS; i++)
-                data[i] = readl(&mb->args[i]);
-        err = readl(&mb->error);
+                data[i] = cx18_readl(cx, &mb->args[i]);
+        err = cx18_readl(cx, &mb->error);
         if (!in_atomic() && (info->flags & API_SLOW))
                 cx18_msleep_timeout(300, 0);
         if (err)
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index a33ba04a268..48976833e23 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -170,6 +170,7 @@ int cx18_stream_alloc(struct cx18_stream *s)
                 }
                 buf->id = cx->buffer_id++;
                 INIT_LIST_HEAD(&buf->list);
+                /* FIXME - check for mmio */
                 buf->dma_handle = pci_map_single(s->cx->dev,
                                 buf->buf, s->buf_size, s->dma);
                 cx18_buf_sync_for_cpu(s, buf);
@@ -193,6 +194,7 @@ void cx18_stream_free(struct cx18_stream *s)
 
         /* empty q_free */
         while ((buf = cx18_dequeue(s, &s->q_free))) {
+                /* FIXME - check for mmio */
                 pci_unmap_single(s->cx->dev, buf->dma_handle,
                                 s->buf_size, s->dma);
                 kfree(buf->buf);
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index 7f93bb13c09..0c7df932d17 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -28,6 +28,7 @@
 static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s,
         struct cx18_buffer *buf)
 {
+        /* FIXME check IO transfers */
         pci_dma_sync_single_for_cpu(s->cx->dev, buf->dma_handle,
                                 s->buf_size, s->dma);
 }
@@ -35,6 +36,7 @@ static inline void cx18_buf_sync_for_cpu(struct cx18_stream *s,
 static inline void cx18_buf_sync_for_device(struct cx18_stream *s,
         struct cx18_buffer *buf)
 {
+        /* FIXME check IO transfers */
         pci_dma_sync_single_for_device(s->cx->dev, buf->dma_handle,
                                 s->buf_size, s->dma);
 }
diff --git a/drivers/media/video/cx18/cx18-scb.c b/drivers/media/video/cx18/cx18-scb.c
index 30bc803e30d..f56d3772aa6 100644
--- a/drivers/media/video/cx18/cx18-scb.c
+++ b/drivers/media/video/cx18/cx18-scb.c
@@ -20,102 +20,103 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-scb.h"
 
 void cx18_init_scb(struct cx18 *cx)
 {
-        setup_page(SCB_OFFSET);
-        memset_io(cx->scb, 0, 0x10000);
+        cx18_setup_page(cx, SCB_OFFSET);
+        cx18_memset_io(cx, cx->scb, 0, 0x10000);
 
-        writel(IRQ_APU_TO_CPU,     &cx->scb->apu2cpu_irq);
-        writel(IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack);
-        writel(IRQ_HPU_TO_CPU,     &cx->scb->hpu2cpu_irq);
-        writel(IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack);
-        writel(IRQ_PPU_TO_CPU,     &cx->scb->ppu2cpu_irq);
-        writel(IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack);
-        writel(IRQ_EPU_TO_CPU,     &cx->scb->epu2cpu_irq);
-        writel(IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack);
+        cx18_writel(cx, IRQ_APU_TO_CPU,     &cx->scb->apu2cpu_irq);
+        cx18_writel(cx, IRQ_CPU_TO_APU_ACK, &cx->scb->cpu2apu_irq_ack);
+        cx18_writel(cx, IRQ_HPU_TO_CPU,     &cx->scb->hpu2cpu_irq);
+        cx18_writel(cx, IRQ_CPU_TO_HPU_ACK, &cx->scb->cpu2hpu_irq_ack);
+        cx18_writel(cx, IRQ_PPU_TO_CPU,     &cx->scb->ppu2cpu_irq);
+        cx18_writel(cx, IRQ_CPU_TO_PPU_ACK, &cx->scb->cpu2ppu_irq_ack);
+        cx18_writel(cx, IRQ_EPU_TO_CPU,     &cx->scb->epu2cpu_irq);
+        cx18_writel(cx, IRQ_CPU_TO_EPU_ACK, &cx->scb->cpu2epu_irq_ack);
 
-        writel(IRQ_CPU_TO_APU,     &cx->scb->cpu2apu_irq);
-        writel(IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack);
-        writel(IRQ_HPU_TO_APU,     &cx->scb->hpu2apu_irq);
-        writel(IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack);
-        writel(IRQ_PPU_TO_APU,     &cx->scb->ppu2apu_irq);
-        writel(IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack);
-        writel(IRQ_EPU_TO_APU,     &cx->scb->epu2apu_irq);
-        writel(IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack);
+        cx18_writel(cx, IRQ_CPU_TO_APU,     &cx->scb->cpu2apu_irq);
+        cx18_writel(cx, IRQ_APU_TO_CPU_ACK, &cx->scb->apu2cpu_irq_ack);
+        cx18_writel(cx, IRQ_HPU_TO_APU,     &cx->scb->hpu2apu_irq);
+        cx18_writel(cx, IRQ_APU_TO_HPU_ACK, &cx->scb->apu2hpu_irq_ack);
+        cx18_writel(cx, IRQ_PPU_TO_APU,     &cx->scb->ppu2apu_irq);
+        cx18_writel(cx, IRQ_APU_TO_PPU_ACK, &cx->scb->apu2ppu_irq_ack);
+        cx18_writel(cx, IRQ_EPU_TO_APU,     &cx->scb->epu2apu_irq);
+        cx18_writel(cx, IRQ_APU_TO_EPU_ACK, &cx->scb->apu2epu_irq_ack);
 
-        writel(IRQ_CPU_TO_HPU,     &cx->scb->cpu2hpu_irq);
-        writel(IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack);
-        writel(IRQ_APU_TO_HPU,     &cx->scb->apu2hpu_irq);
-        writel(IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack);
-        writel(IRQ_PPU_TO_HPU,     &cx->scb->ppu2hpu_irq);
-        writel(IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack);
-        writel(IRQ_EPU_TO_HPU,     &cx->scb->epu2hpu_irq);
-        writel(IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack);
+        cx18_writel(cx, IRQ_CPU_TO_HPU,     &cx->scb->cpu2hpu_irq);
+        cx18_writel(cx, IRQ_HPU_TO_CPU_ACK, &cx->scb->hpu2cpu_irq_ack);
+        cx18_writel(cx, IRQ_APU_TO_HPU,     &cx->scb->apu2hpu_irq);
+        cx18_writel(cx, IRQ_HPU_TO_APU_ACK, &cx->scb->hpu2apu_irq_ack);
+        cx18_writel(cx, IRQ_PPU_TO_HPU,     &cx->scb->ppu2hpu_irq);
+        cx18_writel(cx, IRQ_HPU_TO_PPU_ACK, &cx->scb->hpu2ppu_irq_ack);
+        cx18_writel(cx, IRQ_EPU_TO_HPU,     &cx->scb->epu2hpu_irq);
+        cx18_writel(cx, IRQ_HPU_TO_EPU_ACK, &cx->scb->hpu2epu_irq_ack);
 
-        writel(IRQ_CPU_TO_PPU,     &cx->scb->cpu2ppu_irq);
-        writel(IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack);
-        writel(IRQ_APU_TO_PPU,     &cx->scb->apu2ppu_irq);
-        writel(IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack);
-        writel(IRQ_HPU_TO_PPU,     &cx->scb->hpu2ppu_irq);
-        writel(IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack);
-        writel(IRQ_EPU_TO_PPU,     &cx->scb->epu2ppu_irq);
-        writel(IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack);
+        cx18_writel(cx, IRQ_CPU_TO_PPU,     &cx->scb->cpu2ppu_irq);
+        cx18_writel(cx, IRQ_PPU_TO_CPU_ACK, &cx->scb->ppu2cpu_irq_ack);
+        cx18_writel(cx, IRQ_APU_TO_PPU,     &cx->scb->apu2ppu_irq);
+        cx18_writel(cx, IRQ_PPU_TO_APU_ACK, &cx->scb->ppu2apu_irq_ack);
+        cx18_writel(cx, IRQ_HPU_TO_PPU,     &cx->scb->hpu2ppu_irq);
+        cx18_writel(cx, IRQ_PPU_TO_HPU_ACK, &cx->scb->ppu2hpu_irq_ack);
+        cx18_writel(cx, IRQ_EPU_TO_PPU,     &cx->scb->epu2ppu_irq);
+        cx18_writel(cx, IRQ_PPU_TO_EPU_ACK, &cx->scb->ppu2epu_irq_ack);
 
-        writel(IRQ_CPU_TO_EPU,     &cx->scb->cpu2epu_irq);
-        writel(IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack);
-        writel(IRQ_APU_TO_EPU,     &cx->scb->apu2epu_irq);
-        writel(IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack);
-        writel(IRQ_HPU_TO_EPU,     &cx->scb->hpu2epu_irq);
-        writel(IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack);
-        writel(IRQ_PPU_TO_EPU,     &cx->scb->ppu2epu_irq);
-        writel(IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack);
+        cx18_writel(cx, IRQ_CPU_TO_EPU,     &cx->scb->cpu2epu_irq);
+        cx18_writel(cx, IRQ_EPU_TO_CPU_ACK, &cx->scb->epu2cpu_irq_ack);
+        cx18_writel(cx, IRQ_APU_TO_EPU,     &cx->scb->apu2epu_irq);
+        cx18_writel(cx, IRQ_EPU_TO_APU_ACK, &cx->scb->epu2apu_irq_ack);
+        cx18_writel(cx, IRQ_HPU_TO_EPU,     &cx->scb->hpu2epu_irq);
+        cx18_writel(cx, IRQ_EPU_TO_HPU_ACK, &cx->scb->epu2hpu_irq_ack);
+        cx18_writel(cx, IRQ_PPU_TO_EPU,     &cx->scb->ppu2epu_irq);
+        cx18_writel(cx, IRQ_EPU_TO_PPU_ACK, &cx->scb->epu2ppu_irq_ack);
 
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2cpu_mb),
                         &cx->scb->apu2cpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2cpu_mb),
                         &cx->scb->hpu2cpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2cpu_mb),
                         &cx->scb->ppu2cpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2cpu_mb),
                         &cx->scb->epu2cpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2apu_mb),
                         &cx->scb->cpu2apu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2apu_mb),
                         &cx->scb->hpu2apu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2apu_mb),
                         &cx->scb->ppu2apu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2apu_mb),
                         &cx->scb->epu2apu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2hpu_mb),
                         &cx->scb->cpu2hpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2hpu_mb),
                         &cx->scb->apu2hpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2hpu_mb),
                         &cx->scb->ppu2hpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2hpu_mb),
                         &cx->scb->epu2hpu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2ppu_mb),
                         &cx->scb->cpu2ppu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2ppu_mb),
                         &cx->scb->apu2ppu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2ppu_mb),
                         &cx->scb->hpu2ppu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, epu2ppu_mb),
                         &cx->scb->epu2ppu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu2epu_mb),
                         &cx->scb->cpu2epu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, apu2epu_mb),
                         &cx->scb->apu2epu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, hpu2epu_mb),
                         &cx->scb->hpu2epu_mb_offset);
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, ppu2epu_mb),
                         &cx->scb->ppu2epu_mb_offset);
 
-        writel(SCB_OFFSET + offsetof(struct cx18_scb, cpu_state),
+        cx18_writel(cx, SCB_OFFSET + offsetof(struct cx18_scb, cpu_state),
                         &cx->scb->ipc_offset);
 
-        writel(1, &cx->scb->hpu_state);
-        writel(1, &cx->scb->epu_state);
+        cx18_writel(cx, 1, &cx->scb->hpu_state);
+        cx18_writel(cx, 1, &cx->scb->epu_state);
 }
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index 4d5b446895c..c752a6a4dbd 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -22,6 +22,7 @@
  */
 
 #include "cx18-driver.h"
+#include "cx18-io.h"
 #include "cx18-fileops.h"
 #include "cx18-mailbox.h"
 #include "cx18-i2c.h"
@@ -469,7 +470,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
 
         if (atomic_read(&cx->tot_capturing) == 0) {
                 clear_bit(CX18_F_I_EOS, &cx->i_flags);
-                write_reg(7, CX18_DSP0_INTERRUPT_MASK);
+                cx18_write_reg(cx, 7, CX18_DSP0_INTERRUPT_MASK);
         }
 
         cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
@@ -479,8 +480,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s)
         list_for_each(p, &s->q_free.list) {
                 struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list);
 
-                writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr);
-                writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
+                cx18_writel(cx, buf->dma_handle,
+                                        &cx->scb->cpu_mdl[buf->id].paddr);
+                cx18_writel(cx, s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
                 cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
                         (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
                         1, buf->id, s->buf_size);
@@ -563,7 +565,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end)
         if (atomic_read(&cx->tot_capturing) > 0)
                 return 0;
 
-        write_reg(5, CX18_DSP0_INTERRUPT_MASK);
+        cx18_write_reg(cx, 5, CX18_DSP0_INTERRUPT_MASK);
         wake_up(&s->waitq);
 
         return 0;