Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ahci: add workaround for on-board 5723s on some gigabyte boards
  ahci: Soften up the dmesg on SB600 PMP softreset failure recovery
  Documentation/kernel-parameters.txt: document libata's ignore_hpa option
  sata_nv: MSI support, disabled by default
  libata: OCZ Vertex can't do HPA
  pata_atiixp: fix second channel support
  pata_at91: fix resource release

5 files changed, 99 insertions, 27 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 958c1fa4190..fe3eba5d6b3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -219,6 +219,8 @@ enum {
         AHCI_HFLAG_SECT255              = (1 << 8), /* max 255 sectors */
         AHCI_HFLAG_YES_NCQ              = (1 << 9), /* force NCQ cap on */
         AHCI_HFLAG_NO_SUSPEND           = (1 << 10), /* don't suspend */
+        AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as
+                                                        link offline */
 
         /* ap->flags bits */
 
@@ -1663,6 +1665,7 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
                              int (*check_ready)(struct ata_link *link))
 {
         struct ata_port *ap = link->ap;
+        struct ahci_host_priv *hpriv = ap->host->private_data;
         const char *reason = NULL;
         unsigned long now, msecs;
         struct ata_taskfile tf;
@@ -1701,12 +1704,21 @@ static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
 
         /* wait for link to become ready */
         rc = ata_wait_after_reset(link, deadline, check_ready);
-        /* link occupied, -ENODEV too is an error */
-        if (rc) {
+        if (rc == -EBUSY && hpriv->flags & AHCI_HFLAG_SRST_TOUT_IS_OFFLINE) {
+                /*
+                 * Workaround for cases where link online status can't
+                 * be trusted.  Treat device readiness timeout as link
+                 * offline.
+                 */
+                ata_link_printk(link, KERN_INFO,
+                                "device not ready, treating as offline\n");
+                *class = ATA_DEV_NONE;
+        } else if (rc) {
+                /* link occupied, -ENODEV too is an error */
                 reason = "device not ready";
                 goto fail;
-        }
-        *class = ahci_dev_classify(ap);
+        } else
+                *class = ahci_dev_classify(ap);
 
         DPRINTK("EXIT, class=%u\n", *class);
         return 0;
@@ -1773,7 +1785,8 @@ static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
                 irq_sts = readl(port_mmio + PORT_IRQ_STAT);
                 if (irq_sts & PORT_IRQ_BAD_PMP) {
                         ata_link_printk(link, KERN_WARNING,
-                                        "failed due to HW bug, retry pmp=0\n");
+                                        "applying SB600 PMP SRST workaround "
+                                        "and retrying\n");
                         rc = ahci_do_softreset(link, class, 0, deadline,
                                                ahci_check_ready);
                 }
@@ -2726,6 +2739,56 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
         return !ver || strcmp(ver, dmi->driver_data) < 0;
 }
 
+static bool ahci_broken_online(struct pci_dev *pdev)
+{
+#define ENCODE_BUSDEVFN(bus, slot, func)                        \
+        (void *)(unsigned long)(((bus) << 8) | PCI_DEVFN((slot), (func)))
+        static const struct dmi_system_id sysids[] = {
+                /*
+                 * There are several gigabyte boards which use
+                 * SIMG5723s configured as hardware RAID.  Certain
+                 * 5723 firmware revisions shipped there keep the link
+                 * online but fail to answer properly to SRST or
+                 * IDENTIFY when no device is attached downstream
+                 * causing libata to retry quite a few times leading
+                 * to excessive detection delay.
+                 *
+                 * As these firmwares respond to the second reset try
+                 * with invalid device signature, considering unknown
+                 * sig as offline works around the problem acceptably.
+                 */
+                {
+                        .ident = "EP45-DQ6",
+                        .matches = {
+                                DMI_MATCH(DMI_BOARD_VENDOR,
+                                          "Gigabyte Technology Co., Ltd."),
+                                DMI_MATCH(DMI_BOARD_NAME, "EP45-DQ6"),
+                        },
+                        .driver_data = ENCODE_BUSDEVFN(0x0a, 0x00, 0),
+                },
+                {
+                        .ident = "EP45-DS5",
+                        .matches = {
+                                DMI_MATCH(DMI_BOARD_VENDOR,
+                                          "Gigabyte Technology Co., Ltd."),
+                                DMI_MATCH(DMI_BOARD_NAME, "EP45-DS5"),
+                        },
+                        .driver_data = ENCODE_BUSDEVFN(0x03, 0x00, 0),
+                },
+                { }     /* terminate list */
+        };
+#undef ENCODE_BUSDEVFN
+        const struct dmi_system_id *dmi = dmi_first_match(sysids);
+        unsigned int val;
+
+        if (!dmi)
+                return false;
+
+        val = (unsigned long)dmi->driver_data;
+
+        return pdev->bus->number == (val >> 8) && pdev->devfn == (val & 0xff);
+}
+
 static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
         static int printed_version;
@@ -2841,6 +2904,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
                            "BIOS update required for suspend/resume\n");
         }
 
+        if (ahci_broken_online(pdev)) {
+                hpriv->flags |= AHCI_HFLAG_SRST_TOUT_IS_OFFLINE;
+                dev_info(&pdev->dev,
+                         "online status unreliable, applying workaround\n");
+        }
+
         /* CAP.NP sometimes indicate the index of the last enabled
          * port, at other times, that of the last possible port, so
          * determining the maximum port number requires looking at
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8ac98ff16d7..072ba5ea138 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4302,6 +4302,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
         { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
         { "MAXTOR 6L080L4",     "A93.0500",     ATA_HORKAGE_BROKEN_HPA },
 
+        /* this one allows HPA unlocking but fails IOs on the area */
+        { "OCZ-VERTEX",             "1.30",     ATA_HORKAGE_BROKEN_HPA },
+
         /* Devices which report 1 sector over size HPA */
         { "ST340823A",          NULL,           ATA_HORKAGE_HPA_SIZE, },
         { "ST320413A",          NULL,           ATA_HORKAGE_HPA_SIZE, },
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 5702affcb32..41c94b1ae49 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -250,7 +250,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
                 ata_port_desc(ap, "no IRQ, using PIO polling");
         }
 
-        info = kzalloc(sizeof(*info), GFP_KERNEL);
+        info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
 
         if (!info) {
                 dev_err(dev, "failed to allocate memory for private data\n");
@@ -275,7 +275,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
         if (!info->ide_addr) {
                 dev_err(dev, "failed to map IO base\n");
                 ret = -ENOMEM;
-                goto err_ide_ioremap;
+                goto err_put;
         }
 
         info->alt_addr = devm_ioremap(dev,
@@ -284,7 +284,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
         if (!info->alt_addr) {
                 dev_err(dev, "failed to map CTL base\n");
                 ret = -ENOMEM;
-                goto err_alt_ioremap;
+                goto err_put;
         }
 
         ap->ioaddr.cmd_addr = info->ide_addr;
@@ -303,13 +303,8 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
                         irq ? ata_sff_interrupt : NULL,
                         irq_flags, &pata_at91_sht);
 
-err_alt_ioremap:
-        devm_iounmap(dev, info->ide_addr);
-
-err_ide_ioremap:
+err_put:
         clk_put(info->mck);
-        kfree(info);
-
         return ret;
 }
 
@@ -317,7 +312,6 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
 {
         struct ata_host *host = dev_get_drvdata(&pdev->dev);
         struct at91_ide_info *info;
-        struct device *dev = &pdev->dev;
 
         if (!host)
                 return 0;
@@ -328,11 +322,8 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
         if (!info)
                 return 0;
 
-        devm_iounmap(dev, info->ide_addr);
-        devm_iounmap(dev, info->alt_addr);
         clk_put(info->mck);
 
-        kfree(info);
         return 0;
 }
 
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index bec0b8ade66..45915566e4e 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,6 +1,7 @@
 /*
  * pata_atiixp.c        - ATI PATA for new ATA layer
  *                        (C) 2005 Red Hat Inc
+ *                        (C) 2009 Bartlomiej Zolnierkiewicz
  *
  * Based on
  *
@@ -61,20 +62,19 @@ static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev,
 
         struct pci_dev *pdev = to_pci_dev(ap->host->dev);
         int dn = 2 * ap->port_no + adev->devno;
-
-        /* Check this is correct - the order is odd in both drivers */
         int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
-        u16 pio_mode_data, pio_timing_data;
+        u32 pio_timing_data;
+        u16 pio_mode_data;
 
         pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
         pio_mode_data &= ~(0x7 << (4 * dn));
         pio_mode_data |= pio << (4 * dn);
         pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
 
-        pci_read_config_word(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
+        pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
         pio_timing_data &= ~(0xFF << timing_shift);
         pio_timing_data |= (pio_timings[pio] << timing_shift);
-        pci_write_config_word(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
+        pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
 }
 
 /**
@@ -119,16 +119,17 @@ static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
                 udma_mode_data |= dma << (4 * dn);
                 pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
         } else {
-                u16 mwdma_timing_data;
-                /* Check this is correct - the order is odd in both drivers */
                 int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
+                u32 mwdma_timing_data;
 
                 dma -= XFER_MW_DMA_0;
 
-                pci_read_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, &mwdma_timing_data);
+                pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+                                      &mwdma_timing_data);
                 mwdma_timing_data &= ~(0xFF << timing_shift);
                 mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
-                pci_write_config_word(pdev, ATIIXP_IDE_MWDMA_TIMING, mwdma_timing_data);
+                pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
+                                       mwdma_timing_data);
         }
         /*
          *      We must now look at the PIO mode situation. We may need to
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index b2d11f300c3..86a40582999 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -602,6 +602,7 @@ MODULE_VERSION(DRV_VERSION);
 
 static int adma_enabled;
 static int swncq_enabled = 1;
+static int msi_enabled;
 
 static void nv_adma_register_mode(struct ata_port *ap)
 {
@@ -2459,6 +2460,11 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
         } else if (type == SWNCQ)
                 nv_swncq_host_init(host);
 
+        if (msi_enabled) {
+                dev_printk(KERN_NOTICE, &pdev->dev, "Using MSI\n");
+                pci_enable_msi(pdev);
+        }
+
         pci_set_master(pdev);
         return ata_host_activate(host, pdev->irq, ipriv->irq_handler,
                                  IRQF_SHARED, ipriv->sht);
@@ -2558,4 +2564,6 @@ module_param_named(adma, adma_enabled, bool, 0444);
 MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
 MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
+module_param_named(msi, msi_enabled, bool, 0444);
+MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");