Fix common misspellings

Fixes generated by 'codespell' and manually reviewed.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>

1370 files changed, 2679 insertions, 2679 deletions

diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
index d1d484d4a06..f703b288115 100644
--- a/drivers/acpi/apei/ghes.c
+++ b/drivers/acpi/apei/ghes.c
@@ -241,7 +241,7 @@ static inline int ghes_severity(int severity)
         case CPER_SEV_FATAL:
                 return GHES_SEV_PANIC;
         default:
-                /* Unkown, go panic */
+                /* Unknown, go panic */
                 return GHES_SEV_PANIC;
         }
 }
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index fa84e974433..ad350173956 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -1164,7 +1164,7 @@ int acpi_processor_set_throttling(struct acpi_processor *pr,
                          */
                         if (!match_pr->flags.throttling) {
                                 ACPI_DEBUG_PRINT((ACPI_DB_INFO,
-                                        "Throttling Controll is unsupported "
+                                        "Throttling Control is unsupported "
                                         "on CPU %d\n", i));
                                 continue;
                         }
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 31e9e10f657..ec574fc8fbc 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -1354,7 +1354,7 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video,
                 status = acpi_video_bus_get_one_device(dev, video);
                 if (ACPI_FAILURE(status)) {
                         printk(KERN_WARNING PREFIX
-                                        "Cant attach device\n");
+                                        "Can't attach device\n");
                         continue;
                 }
         }
@@ -1373,7 +1373,7 @@ static int acpi_video_bus_put_one_device(struct acpi_video_device *device)
                                             acpi_video_device_notify);
         if (ACPI_FAILURE(status)) {
                 printk(KERN_WARNING PREFIX
-                       "Cant remove video notify handler\n");
+                       "Can't remove video notify handler\n");
         }
         if (device->backlight) {
                 backlight_device_unregister(device->backlight);
diff --git a/drivers/amba/bus.c b/drivers/amba/bus.c
index 6d2bb2524b6..82104050315 100644
--- a/drivers/amba/bus.c
+++ b/drivers/amba/bus.c
@@ -760,7 +760,7 @@ int amba_request_regions(struct amba_device *dev, const char *name)
 }
 
 /**
- *      amba_release_regions - release mem regions assoicated with device
+ *      amba_release_regions - release mem regions associated with device
  *      @dev: amba_device structure for device
  *
  *      Release regions claimed by a successful call to amba_request_regions.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index e62f693be8e..39d829cd82d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -926,7 +926,7 @@ static bool ahci_broken_suspend(struct pci_dev *pdev)
                 /*
                  * Acer eMachines G725 has the same problem.  BIOS
                  * V1.03 is known to be broken.  V3.04 is known to
-                 * work.  Inbetween, there are V1.06, V2.06 and V3.03
+                 * work.  Between, there are V1.06, V2.06 and V3.03
                  * that we don't have much idea about.  For now,
                  * blacklist anything older than V3.04.
                  *
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index ccaf0812205..39865009c25 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -225,7 +225,7 @@ enum {
         /* em_ctl bits */
         EM_CTL_RST              = (1 << 9), /* Reset */
         EM_CTL_TM               = (1 << 8), /* Transmit Message */
-        EM_CTL_MR               = (1 << 0), /* Message Recieved */
+        EM_CTL_MR               = (1 << 0), /* Message Received */
         EM_CTL_ALHD             = (1 << 26), /* Activity LED */
         EM_CTL_XMT              = (1 << 25), /* Transmit Only */
         EM_CTL_SMB              = (1 << 24), /* Single Message Buffer */
@@ -281,7 +281,7 @@ struct ahci_port_priv {
 };
 
 struct ahci_host_priv {
-        void __iomem *          mmio;           /* bus-independant mem map */
+        void __iomem *          mmio;           /* bus-independent mem map */
         unsigned int            flags;          /* AHCI_HFLAG_* */
         u32                     cap;            /* cap to use */
         u32                     cap2;           /* cap2 to use */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index cdec4ab3b15..0bc3fd6c3fd 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -38,16 +38,16 @@
  *  Hardware documentation available at http://developer.intel.com/
  *
  * Documentation
- *      Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
+ *      Publicly available from Intel web site. Errata documentation
+ * is also publicly available. As an aide to anyone hacking on this
  * driver the list of errata that are relevant is below, going back to
  * PIIX4. Older device documentation is now a bit tricky to find.
  *
  * The chipsets all follow very much the same design. The original Triton
- * series chipsets do _not_ support independant device timings, but this
+ * series chipsets do _not_ support independent device timings, but this
  * is fixed in Triton II. With the odd mobile exception the chips then
  * change little except in gaining more modes until SATA arrives. This
- * driver supports only the chips with independant timing (that is those
+ * driver supports only the chips with independent timing (that is those
  * with SITRE and the 0x44 timing register). See pata_oldpiix and pata_mpiix
  * for the early chip drivers.
  *
@@ -122,7 +122,7 @@ enum {
         P2                      = 2,  /* port 2 */
         P3                      = 3,  /* port 3 */
         IDE                     = -1, /* IDE */
-        NA                      = -2, /* not avaliable */
+        NA                      = -2, /* not available */
         RV                      = -3, /* reserved */
 
         PIIX_AHCI_DEVICE        = 6,
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b91e19cab10..423c0a6952b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5340,7 +5340,7 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
  *
  *      Resume @host.  Actual operation is performed by EH.  This
  *      function requests EH to perform PM operations and returns.
- *      Note that all resume operations are performed parallely.
+ *      Note that all resume operations are performed parallelly.
  *
  *      LOCKING:
  *      Kernel thread context (may sleep).
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index df3f3140c9c..88cd22fa65c 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -771,7 +771,7 @@ void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
                 /* process port suspend request */
                 ata_eh_handle_port_suspend(ap);
 
-                /* Exception might have happend after ->error_handler
+                /* Exception might have happened after ->error_handler
                  * recovered the port but before this point.  Repeat
                  * EH in such case.
                  */
@@ -1742,7 +1742,7 @@ void ata_eh_analyze_ncq_error(struct ata_link *link)
  *
  *      Analyze taskfile of @qc and further determine cause of
  *      failure.  This function also requests ATAPI sense data if
- *      avaliable.
+ *      available.
  *
  *      LOCKING:
  *      Kernel thread context (may sleep).
@@ -1893,7 +1893,7 @@ static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
  *         occurred during last 5 mins, NCQ_OFF.
  *
  *      3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors
- *         ocurred during last 5 mins, FALLBACK_TO_PIO
+ *         occurred during last 5 mins, FALLBACK_TO_PIO
  *
  *      4. If more than 3 TOUT_HSM or UNK_DEV errors occurred
  *         during last 10 mins, NCQ_OFF.
@@ -2577,7 +2577,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
         if (link->flags & ATA_LFLAG_NO_SRST)
                 softreset = NULL;
 
-        /* make sure each reset attemp is at least COOL_DOWN apart */
+        /* make sure each reset attempt is at least COOL_DOWN apart */
         if (ehc->i.flags & ATA_EHI_DID_RESET) {
                 now = jiffies;
                 WARN_ON(time_after(ehc->last_reset, now));
@@ -2736,7 +2736,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
                         if (!reset) {
                                 ata_link_printk(link, KERN_ERR,
                                                 "follow-up softreset required "
-                                                "but no softreset avaliable\n");
+                                                "but no softreset available\n");
                                 failed_link = link;
                                 rc = -EINVAL;
                                 goto fail;
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index a8341999135..e2f57e9e12f 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -999,7 +999,7 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
  *      @qc: Command that we are erroring out
  *
  *      Generate sense block for a failed ATA command @qc.  Descriptor
- *      format is used to accomodate LBA48 block address.
+ *      format is used to accommodate LBA48 block address.
  *
  *      LOCKING:
  *      None.
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index cf7acbc0cfc..f8380ce0f4d 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2839,7 +2839,7 @@ unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
                 bmdma_stopped = true;
 
                 if (unlikely(host_stat & ATA_DMA_ERR)) {
-                        /* error when transfering data to/from memory */
+                        /* error when transferring data to/from memory */
                         qc->err_mask |= AC_ERR_HOST_BUS;
                         ap->hsm_task_state = HSM_ST_ERR;
                 }
@@ -3032,7 +3032,7 @@ void ata_bmdma_start(struct ata_queued_cmd *qc)
          * Or maybe I'm just being paranoid.
          *
          * FIXME: The posting of this write means I/O starts are
-         * unneccessarily delayed for MMIO
+         * unnecessarily delayed for MMIO
          */
 }
 EXPORT_SYMBOL_GPL(ata_bmdma_start);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 620a07cabe3..b0975a5ad8c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -11,7 +11,7 @@
  *      Power management on ports
  *
  *
- *  Documentation publically available.
+ *  Documentation publicly available.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c
index 65cee74605b..719bb73a73e 100644
--- a/drivers/ata/pata_arasan_cf.c
+++ b/drivers/ata/pata_arasan_cf.c
@@ -385,7 +385,7 @@ static inline int wait4buf(struct arasan_cf_dev *acdev)
                 return -ETIMEDOUT;
         }
 
-        /* Check if PIO Error interrupt has occured */
+        /* Check if PIO Error interrupt has occurred */
         if (acdev->dma_status & ATA_DMA_ERR)
                 return -EAGAIN;
 
@@ -450,7 +450,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg)
         /*
          * For each sg:
          * MAX_XFER_COUNT data will be transferred before we get transfer
-         * complete interrupt. Inbetween after FIFO_SIZE data
+         * complete interrupt. Between after FIFO_SIZE data
          * buffer available interrupt will be generated. At this time we will
          * fill FIFO again: max FIFO_SIZE data.
          */
@@ -463,7 +463,7 @@ static int sg_xfer(struct arasan_cf_dev *acdev, struct scatterlist *sg)
                                 acdev->vbase + XFER_CTR);
                 spin_unlock_irqrestore(&acdev->host->lock, flags);
 
-                /* continue dma xfers untill current sg is completed */
+                /* continue dma xfers until current sg is completed */
                 while (xfer_cnt) {
                         /* wait for read to complete */
                         if (!write) {
@@ -563,7 +563,7 @@ static void data_xfer(struct work_struct *work)
 
 chan_request_fail:
         spin_lock_irqsave(&acdev->host->lock, flags);
-        /* error when transfering data to/from memory */
+        /* error when transferring data to/from memory */
         qc->err_mask |= AC_ERR_HOST_BUS;
         qc->ap->hsm_task_state = HSM_ST_ERR;
 
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index e0b58b8dfe6..ea64967000f 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1342,7 +1342,7 @@ static unsigned int bfin_ata_host_intr(struct ata_port *ap,
                         ap->ops->bmdma_stop(qc);
 
                         if (unlikely(host_stat & ATA_DMA_ERR)) {
-                                /* error when transfering data to/from memory */
+                                /* error when transferring data to/from memory */
                                 qc->err_mask |= AC_ERR_HOST_BUS;
                                 ap->hsm_task_state = HSM_ST_ERR;
                         }
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 030952f1f97..e3254fcff0f 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -29,7 +29,7 @@
  * General Public License for more details.
  *
  * Documentation:
- *      Not publically available.
+ *      Not publicly available.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index b21f0021f54..d8d9c580774 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -15,7 +15,7 @@
  * with PCI IDE and also that we do not disable the device when our driver is
  * unloaded (as it has many other functions).
  *
- * The driver conciously keeps this logic internally to avoid pushing quirky
+ * The driver consciously keeps this logic internally to avoid pushing quirky
  * PATA history into the clean libata layer.
  *
  * Thinkpad specific note: If you boot an MPIIX using a thinkpad with a PCMCIA
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 4a454a88aa9..4d04471794b 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -112,7 +112,7 @@ static int rz1000_reinit_one(struct pci_dev *pdev)
         if (rc)
                 return rc;
 
-        /* If this fails on resume (which is a "cant happen" case), we
+        /* If this fails on resume (which is a "can't happen" case), we
            must stop as any progress risks data loss */
         if (rz1000_fifo_disable(pdev))
                 panic("rz1000 fifo");
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 00eefbd84b3..118787caa93 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -11,7 +11,7 @@
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *
- *  Documentation publically available.
+ *  Documentation publicly available.
  *
  *      If you have strange problems with nVidia chipset systems please
  *      see the SI support documentation and update your system BIOS
@@ -43,7 +43,7 @@
  *
  *      Turn a config register offset into the right address in either
  *      PCI space or MMIO space to access the control register in question
- *      Thankfully this is a configuration operation so isnt performance
+ *      Thankfully this is a configuration operation so isn't performance
  *      criticial.
  */
 
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index c04abc393fc..be08ff92db1 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -331,7 +331,7 @@ static void sis_old_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
         if (adev->dma_mode < XFER_UDMA_0) {
                 /* bits 3-0 hold recovery timing bits 8-10 active timing and
-                   the higher bits are dependant on the device */
+                   the higher bits are dependent on the device */
                 timing &= ~0x870F;
                 timing |= mwdma_bits[speed];
         } else {
@@ -371,7 +371,7 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 
         if (adev->dma_mode < XFER_UDMA_0) {
                 /* bits 3-0 hold recovery timing bits 8-10 active timing and
-                   the higher bits are dependant on the device, bit 15 udma */
+                   the higher bits are dependent on the device, bit 15 udma */
                 timing &= ~0x870F;
                 timing |= mwdma_bits[speed];
         } else {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 0d1f89e571d..03b6d69d619 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -30,7 +30,7 @@
  * Loosely based on the piix & svwks drivers.
  *
  * Documentation:
- *      Not publically available.
+ *      Not publicly available.
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 0f91e583892..35a71d875d0 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -42,7 +42,7 @@ enum {
 
         /*
          * SATA-FSL host controller supports a max. of (15+1) direct PRDEs, and
-         * chained indirect PRDEs upto a max count of 63.
+         * chained indirect PRDEs up to a max count of 63.
          * We are allocating an array of 63 PRDEs contiguously, but PRDE#15 will
          * be setup as an indirect descriptor, pointing to it's next
          * (contiguous) PRDE. Though chained indirect PRDE arrays are
@@ -907,7 +907,7 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
         ata_msleep(ap, 1);
 
         /*
-         * SATA device enters reset state after receving a Control register
+         * SATA device enters reset state after receiving a Control register
          * FIS with SRST bit asserted and it awaits another H2D Control reg.
          * FIS with SRST bit cleared, then the device does internal diags &
          * initialization, followed by indicating it's initialization status
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index cd40651e9b7..b52c0519ad0 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1352,7 +1352,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
                         /*
                          * Workaround for 88SX60x1 FEr SATA#26:
                          *
-                         * COMRESETs have to take care not to accidently
+                         * COMRESETs have to take care not to accidentally
                          * put the drive to sleep when writing SCR_CONTROL.
                          * Setting bits 12..15 prevents this problem.
                          *
@@ -2044,7 +2044,7 @@ static void mv_qc_prep(struct ata_queued_cmd *qc)
 
         cw = &pp->crqb[in_index].ata_cmd[0];
 
-        /* Sadly, the CRQB cannot accomodate all registers--there are
+        /* Sadly, the CRQB cannot accommodate all registers--there are
          * only 11 bytes...so we must pick and choose required
          * registers based on the command.  So, we drop feature and
          * hob_feature for [RW] DMA commands, but they are needed for
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 42344e3c686..f173ef3bfc1 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2121,7 +2121,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 
         host_stat = ap->ops->bmdma_status(ap);
         if (unlikely(host_stat & ATA_DMA_ERR)) {
-                /* error when transfering data to/from memory */
+                /* error when transferring data to/from memory */
                 ata_ehi_clear_desc(ehi);
                 ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
                 ehi->err_mask |= AC_ERR_HOST_BUS;
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 21242c5709a..54434db15b1 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -582,7 +582,7 @@ static void svia_configure(struct pci_dev *pdev, int board_id)
          * When host issues HOLD, device may send up to 20DW of data
          * before acknowledging it with HOLDA and the host should be
          * able to buffer them in FIFO.  Unfortunately, some WD drives
-         * send upto 40DW before acknowledging HOLD and, in the
+         * send up to 40DW before acknowledging HOLD and, in the
          * default configuration, this ends up overflowing vt6421's
          * FIFO, making the controller abort the transaction with
          * R_ERR.
diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c
index 9f47e862526..a5fcb1eb862 100644
--- a/drivers/atm/ambassador.c
+++ b/drivers/atm/ambassador.c
@@ -497,7 +497,7 @@ static void rx_complete (amb_dev * dev, rx_out * rx) {
           // VC layer stats
           atomic_inc(&atm_vcc->stats->rx);
           __net_timestamp(skb);
-          // end of our responsability
+          // end of our responsibility
           atm_vcc->push (atm_vcc, skb);
           return;
           
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c
index 049650d42c8..ef7a658312a 100644
--- a/drivers/atm/firestream.c
+++ b/drivers/atm/firestream.c
@@ -1782,7 +1782,7 @@ static int __devinit fs_init (struct fs_dev *dev)
                 write_fs (dev, RAS0, RAS0_DCD_XHLT 
                           | (((1 << FS155_VPI_BITS) - 1) * RAS0_VPSEL)
                           | (((1 << FS155_VCI_BITS) - 1) * RAS0_VCSEL));
-                /* We can chose the split arbitarily. We might be able to 
+                /* We can chose the split arbitrarily. We might be able to 
                    support more. Whatever. This should do for now. */
                 dev->atm_dev->ci_range.vpi_bits = FS155_VPI_BITS;
                 dev->atm_dev->ci_range.vci_bits = FS155_VCI_BITS;
diff --git a/drivers/atm/fore200e.h b/drivers/atm/fore200e.h
index 7f97c09aaea..ba34a02b717 100644
--- a/drivers/atm/fore200e.h
+++ b/drivers/atm/fore200e.h
@@ -263,7 +263,7 @@ typedef enum opcode {
 } opcode_t;
 
 
-/* virtual path / virtual channel identifers */
+/* virtual path / virtual channel identifiers */
 
 typedef struct vpvc {
     BITFIELD3(
@@ -926,7 +926,7 @@ typedef struct fore200e_vcc {
 
 #define PCA200E_PCI_LATENCY      0x40    /* maximum slave latenty            */
 #define PCA200E_PCI_MASTER_CTRL  0x41    /* master control                   */
-#define PCA200E_PCI_THRESHOLD    0x42    /* burst / continous req threshold  */
+#define PCA200E_PCI_THRESHOLD    0x42    /* burst / continuous req threshold  */
 
 /* PBI master control register */
 
diff --git a/drivers/atm/horizon.c b/drivers/atm/horizon.c
index 24761e1d664..d58e3fcb9db 100644
--- a/drivers/atm/horizon.c
+++ b/drivers/atm/horizon.c
@@ -169,13 +169,13 @@ static inline void __init show_version (void) {
   Real Time (cdv and max CDT given)
   
   CBR(pcr)             pcr bandwidth always available
-  rtVBR(pcr,scr,mbs)   scr bandwidth always available, upto pcr at mbs too
+  rtVBR(pcr,scr,mbs)   scr bandwidth always available, up to pcr at mbs too
   
   Non Real Time
   
-  nrtVBR(pcr,scr,mbs)  scr bandwidth always available, upto pcr at mbs too
+  nrtVBR(pcr,scr,mbs)  scr bandwidth always available, up to pcr at mbs too
   UBR()
-  ABR(mcr,pcr)         mcr bandwidth always available, upto pcr (depending) too
+  ABR(mcr,pcr)         mcr bandwidth always available, up to pcr (depending) too
   
   mbs is max burst size (bucket)
   pcr and scr have associated cdvt values
@@ -944,7 +944,7 @@ static void hrz_close_rx (hrz_dev * dev, u16 vc) {
 // to be fixed soon, so do not define TAILRECUSRIONWORKS unless you
 // are sure it does as you may otherwise overflow the kernel stack.
 
-// giving this fn a return value would help GCC, alledgedly
+// giving this fn a return value would help GCC, allegedly
 
 static void rx_schedule (hrz_dev * dev, int irq) {
   unsigned int rx_bytes;
@@ -1036,7 +1036,7 @@ static void rx_schedule (hrz_dev * dev, int irq) {
           // VC layer stats
           atomic_inc(&vcc->stats->rx);
           __net_timestamp(skb);
-          // end of our responsability
+          // end of our responsibility
           vcc->push (vcc, skb);
         }
       }
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index bfb7feee040..048f99fe6f8 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -3495,7 +3495,7 @@ init_card(struct atm_dev *dev)
                 return -1;
         }
         if (dev->phy->ioctl == NULL) {
-                printk("%s: LT had no IOCTL funtion defined.\n", card->name);
+                printk("%s: LT had no IOCTL function defined.\n", card->name);
                 deinit_card(card);
                 return -1;
         }
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index f53a43ae2bb..3a82cc23a05 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -766,7 +766,7 @@ struct idt77252_dev
 #define SAR_RCTE_BUFFSTAT_MASK 0x00003000  /* buffer status                  */
 #define SAR_RCTE_EFCI          0x00000800  /* EFCI Congestion flag           */
 #define SAR_RCTE_CLP           0x00000400  /* Cell Loss Priority flag        */
-#define SAR_RCTE_CRC           0x00000200  /* Recieved CRC Error             */
+#define SAR_RCTE_CRC           0x00000200  /* Received CRC Error             */
 #define SAR_RCTE_CELLCNT_MASK  0x000001FF  /* cell Count                     */
 
 #define SAR_RCTE_AAL0          0x00000000  /* AAL types for ALL field        */
diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index d80d51b62a1..1c674a91f14 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -1025,7 +1025,7 @@ static void desc_dbg(IADEV *iadev) {
 } 
   
   
-/*----------------------------- Recieving side stuff --------------------------*/  
+/*----------------------------- Receiving side stuff --------------------------*/  
  
 static void rx_excp_rcvd(struct atm_dev *dev)  
 {  
@@ -1195,7 +1195,7 @@ static void rx_intr(struct atm_dev *dev)
   if (status & RX_PKT_RCVD)  
   {  
         /* do something */  
-        /* Basically recvd an interrupt for receving a packet.  
+        /* Basically recvd an interrupt for receiving a packet.  
         A descriptor would have been written to the packet complete   
         queue. Get all the descriptors and set up dma to move the   
         packets till the packet complete queue is empty..  
@@ -1855,7 +1855,7 @@ static int open_tx(struct atm_vcc *vcc)
                     return -EINVAL; 
                 }
                 if (vcc->qos.txtp.max_pcr > iadev->LineRate) {
-                   IF_CBR(printk("PCR is not availble\n");)
+                   IF_CBR(printk("PCR is not available\n");)
                    return -1;
                 }
                 vc->type = CBR;
diff --git a/drivers/atm/lanai.c b/drivers/atm/lanai.c
index 52880c8387d..4e8ba56f75d 100644
--- a/drivers/atm/lanai.c
+++ b/drivers/atm/lanai.c
@@ -1255,7 +1255,7 @@ static inline void lanai_endtx(struct lanai_dev *lanai,
         /*
          * Since the "butt register" is a shared resounce on the card we
          * serialize all accesses to it through this spinlock.  This is
-         * mostly just paranoia sicne the register is rarely "busy" anyway
+         * mostly just paranoia since the register is rarely "busy" anyway
          * but is needed for correctness.
          */
         spin_lock(&lanai->endtxlock);
@@ -1990,7 +1990,7 @@ static int __devinit lanai_pci_start(struct lanai_dev *lanai)
 
 /*
  * We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll
- * get a CBRZERO interrupt), and we can use it only if noone is receiving
+ * get a CBRZERO interrupt), and we can use it only if no one is receiving
  * AAL0 traffic (since they will use the same queue) - according to the
  * docs we shouldn't even use it for AAL0 traffic
  */
diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c
index 49758593a5b..41ce4bd9681 100644
--- a/drivers/auxdisplay/cfag12864b.c
+++ b/drivers/auxdisplay/cfag12864b.c
@@ -49,7 +49,7 @@
 static unsigned int cfag12864b_rate = CONFIG_CFAG12864B_RATE;
 module_param(cfag12864b_rate, uint, S_IRUGO);
 MODULE_PARM_DESC(cfag12864b_rate,
-        "Refresh rate (hertzs)");
+        "Refresh rate (hertz)");
 
 unsigned int cfag12864b_getrate(void)
 {
@@ -60,7 +60,7 @@ unsigned int cfag12864b_getrate(void)
  * cfag12864b Commands
  *
  *      E = Enable signal
- *              Everytime E switch from low to high,
+ *              Every time E switch from low to high,
  *              cfag12864b/ks0108 reads the command/data.
  *
  *      CS1 = First ks0108controller.
diff --git a/drivers/base/power/runtime.c b/drivers/base/power/runtime.c
index 54597c859ec..3172c60d23a 100644
--- a/drivers/base/power/runtime.c
+++ b/drivers/base/power/runtime.c
@@ -443,7 +443,7 @@ static int rpm_suspend(struct device *dev, int rpmflags)
  *
  * Check if the device's run-time PM status allows it to be resumed.  Cancel
  * any scheduled or pending requests.  If another resume has been started
- * earlier, either return imediately or wait for it to finish, depending on the
+ * earlier, either return immediately or wait for it to finish, depending on the
  * RPM_NOWAIT and RPM_ASYNC flags.  Similarly, if there's a suspend running in
  * parallel with this function, either tell the other process to resume after
  * suspending (deferred_resume) or wait for it to finish.  If the RPM_ASYNC
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index fbe72da6c41..acde9b5ee13 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -197,7 +197,7 @@ kset_put:
 }
 
 /**
- *      sysdev_driver_register - Register auxillary driver
+ *      sysdev_driver_register - Register auxiliary driver
  *      @cls:   Device class driver belongs to.
  *      @drv:   Driver.
  *
@@ -250,7 +250,7 @@ unlock:
 }
 
 /**
- *      sysdev_driver_unregister - Remove an auxillary driver.
+ *      sysdev_driver_unregister - Remove an auxiliary driver.
  *      @cls:   Class driver belongs to.
  *      @drv:   Driver.
  */
@@ -302,7 +302,7 @@ int sysdev_register(struct sys_device *sysdev)
                  * code that should have called us.
                  */
 
-                /* Notify class auxillary drivers */
+                /* Notify class auxiliary drivers */
                 list_for_each_entry(drv, &cls->drivers, entry) {
                         if (drv->add)
                                 drv->add(sysdev);
@@ -335,7 +335,7 @@ void sysdev_unregister(struct sys_device *sysdev)
  *
  *      Loop over each class of system devices, and the devices in each
  *      of those classes. For each device, we call the shutdown method for
- *      each driver registered for the device - the auxillaries,
+ *      each driver registered for the device - the auxiliaries,
  *      and the class driver.
  *
  *      Note: The list is iterated in reverse order, so that we shut down
@@ -360,7 +360,7 @@ void sysdev_shutdown(void)
                         struct sysdev_driver *drv;
                         pr_debug(" %s\n", kobject_name(&sysdev->kobj));
 
-                        /* Call auxillary drivers first */
+                        /* Call auxiliary drivers first */
                         list_for_each_entry(drv, &cls->drivers, entry) {
                                 if (drv->shutdown)
                                         drv->shutdown(sysdev);
@@ -385,7 +385,7 @@ static void __sysdev_resume(struct sys_device *dev)
         WARN_ONCE(!irqs_disabled(),
                 "Interrupts enabled after %pF\n", cls->resume);
 
-        /* Call auxillary drivers next. */
+        /* Call auxiliary drivers next. */
         list_for_each_entry(drv, &cls->drivers, entry) {
                 if (drv->resume)
                         drv->resume(dev);
@@ -432,7 +432,7 @@ int sysdev_suspend(pm_message_t state)
                 list_for_each_entry(sysdev, &cls->kset.list, kobj.entry) {
                         pr_debug(" %s\n", kobject_name(&sysdev->kobj));
 
-                        /* Call auxillary drivers first */
+                        /* Call auxiliary drivers first */
                         list_for_each_entry(drv, &cls->drivers, entry) {
                                 if (drv->suspend) {
                                         ret = drv->suspend(sysdev, state);
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 79882104e43..8066d086578 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -1790,7 +1790,7 @@ static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T
   unsigned short LogicalDeviceNumber = 0;
   int ModelNameLength;
 
-  /* Get data into dma-able area, then copy into permanant location */
+  /* Get data into dma-able area, then copy into permanent location */
   if (!DAC960_V2_NewControllerInfo(Controller))
     return DAC960_Failure(Controller, "GET CONTROLLER INFO");
   memcpy(ControllerInfo, Controller->V2.NewControllerInformation,
diff --git a/drivers/block/drbd/drbd_actlog.c b/drivers/block/drbd/drbd_actlog.c
index 2a1642bc451..c6828b68d77 100644
--- a/drivers/block/drbd/drbd_actlog.c
+++ b/drivers/block/drbd/drbd_actlog.c
@@ -30,7 +30,7 @@
 
 /* We maintain a trivial check sum in our on disk activity log.
  * With that we can ensure correct operation even when the storage
- * device might do a partial (last) sector write while loosing power.
+ * device might do a partial (last) sector write while losing power.
  */
 struct __packed al_transaction {
         u32       magic;
diff --git a/drivers/block/drbd/drbd_int.h b/drivers/block/drbd/drbd_int.h
index 81030d8d654..b2699bb2e53 100644
--- a/drivers/block/drbd/drbd_int.h
+++ b/drivers/block/drbd/drbd_int.h
@@ -622,7 +622,7 @@ DCBP_set_pad_bits(struct p_compressed_bm *p, int n)
 /* one bitmap packet, including the p_header,
  * should fit within one _architecture independend_ page.
  * so we need to use the fixed size 4KiB page size
- * most architechtures have used for a long time.
+ * most architectures have used for a long time.
  */
 #define BM_PACKET_PAYLOAD_BYTES (4096 - sizeof(struct p_header80))
 #define BM_PACKET_WORDS (BM_PACKET_PAYLOAD_BYTES/sizeof(long))
@@ -810,7 +810,7 @@ enum {
 
 /* global flag bits */
 enum {
-        CREATE_BARRIER,         /* next P_DATA is preceeded by a P_BARRIER */
+        CREATE_BARRIER,         /* next P_DATA is preceded by a P_BARRIER */
         SIGNAL_ASENDER,         /* whether asender wants to be interrupted */
         SEND_PING,              /* whether asender should send a ping asap */
 
@@ -1126,7 +1126,7 @@ struct drbd_conf {
         int c_sync_rate; /* current resync rate after syncer throttle magic */
         struct fifo_buffer rs_plan_s; /* correction values of resync planer */
         int rs_in_flight; /* resync sectors in flight (to proxy, in proxy and from proxy) */
-        int rs_planed;    /* resync sectors already planed */
+        int rs_planed;    /* resync sectors already planned */
         atomic_t ap_in_flight; /* App sectors in flight (waiting for ack) */
 };
 
@@ -1144,7 +1144,7 @@ static inline unsigned int mdev_to_minor(struct drbd_conf *mdev)
         return mdev->minor;
 }
 
-/* returns 1 if it was successfull,
+/* returns 1 if it was successful,
  * returns 0 if there was no data socket.
  * so wherever you are going to use the data.socket, e.g. do
  * if (!drbd_get_data_sock(mdev))
@@ -2079,7 +2079,7 @@ static inline void inc_ap_pending(struct drbd_conf *mdev)
 /* counts how many resync-related answers we still expect from the peer
  *                   increase                   decrease
  * C_SYNC_TARGET sends P_RS_DATA_REQUEST (and expects P_RS_DATA_REPLY)
- * C_SYNC_SOURCE sends P_RS_DATA_REPLY   (and expects P_WRITE_ACK whith ID_SYNCER)
+ * C_SYNC_SOURCE sends P_RS_DATA_REPLY   (and expects P_WRITE_ACK with ID_SYNCER)
  *                                         (or P_NEG_ACK with ID_SYNCER)
  */
 static inline void inc_rs_pending(struct drbd_conf *mdev)
diff --git a/drivers/block/drbd/drbd_main.c b/drivers/block/drbd/drbd_main.c
index dfc85f32d31..5b525c179f3 100644
--- a/drivers/block/drbd/drbd_main.c
+++ b/drivers/block/drbd/drbd_main.c
@@ -1561,7 +1561,7 @@ static void after_state_ch(struct drbd_conf *mdev, union drbd_state os,
                 if (drbd_send_state(mdev))
                         dev_warn(DEV, "Notified peer that I'm now diskless.\n");
                 /* corresponding get_ldev in __drbd_set_state
-                 * this may finaly trigger drbd_ldev_destroy. */
+                 * this may finally trigger drbd_ldev_destroy. */
                 put_ldev(mdev);
         }
 
@@ -3706,7 +3706,7 @@ int drbd_md_read(struct drbd_conf *mdev, struct drbd_backing_dev *bdev)
         buffer = (struct meta_data_on_disk *)page_address(mdev->md_io_page);
 
         if (!drbd_md_sync_page_io(mdev, bdev, bdev->md.md_offset, READ)) {
-                /* NOTE: cant do normal error processing here as this is
+                /* NOTE: can't do normal error processing here as this is
                    called BEFORE disk is attached */
                 dev_err(DEV, "Error while reading metadata.\n");
                 rv = ERR_IO_MD_DISK;
diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c
index fe1564c7d8b..fd26666c0b0 100644
--- a/drivers/block/drbd/drbd_receiver.c
+++ b/drivers/block/drbd/drbd_receiver.c
@@ -862,7 +862,7 @@ retry:
         msock->sk->sk_rcvtimeo = mdev->net_conf->ping_int*HZ;
 
         /* we don't want delays.
-         * we use TCP_CORK where apropriate, though */
+         * we use TCP_CORK where appropriate, though */
         drbd_tcp_nodelay(sock);
         drbd_tcp_nodelay(msock);
 
diff --git a/drivers/block/drbd/drbd_vli.h b/drivers/block/drbd/drbd_vli.h
index fc824006e72..8cb1532a381 100644
--- a/drivers/block/drbd/drbd_vli.h
+++ b/drivers/block/drbd/drbd_vli.h
@@ -32,7 +32,7 @@
  * the bitmap transfer time can take much too long,
  * if transmitted in plain text.
  *
- * We try to reduce the transfered bitmap information
+ * We try to reduce the transferred bitmap information
  * by encoding runlengths of bit polarity.
  *
  * We never actually need to encode a "zero" (runlengths are positive).
diff --git a/drivers/block/hd.c b/drivers/block/hd.c
index 30ec6b37424..007c630904c 100644
--- a/drivers/block/hd.c
+++ b/drivers/block/hd.c
@@ -733,7 +733,7 @@ static int __init hd_init(void)
                  * the BIOS or CMOS.  This doesn't work all that well,
                  * since this assumes that this is a primary or secondary
                  * drive, and if we're using this legacy driver, it's
-                 * probably an auxilliary controller added to recover
+                 * probably an auxiliary controller added to recover
                  * legacy data off an ST-506 drive.  Either way, it's
                  * definitely safest to have the user explicitly specify
                  * the information.
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index e2ff697697c..9a5b2a2d616 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -94,7 +94,7 @@ static const struct vio_error_entry viodasd_err_table[] = {
         { 0x0204, EIO, "Use Error" },
         { 0x0205, EIO, "Release Error" },
         { 0x0206, EINVAL, "Invalid Disk" },
-        { 0x0207, EBUSY, "Cant Lock" },
+        { 0x0207, EBUSY, "Can't Lock" },
         { 0x0208, EIO, "Already Locked" },
         { 0x0209, EIO, "Already Unlocked" },
         { 0x020A, EIO, "Invalid Arg" },
diff --git a/drivers/block/xsysace.c b/drivers/block/xsysace.c
index 73354b081ed..645ff765cd1 100644
--- a/drivers/block/xsysace.c
+++ b/drivers/block/xsysace.c
@@ -621,7 +621,7 @@ static void ace_fsm_dostate(struct ace_device *ace)
                 ace_dump_mem(ace->cf_id, 512);  /* Debug: Dump out disk ID */
 
                 if (ace->data_result) {
-                        /* Error occured, disable the disk */
+                        /* Error occurred, disable the disk */
                         ace->media_change = 1;
                         set_capacity(ace->gd, 0);
                         dev_err(ace->dev, "error fetching CF id (%i)\n",
@@ -801,7 +801,7 @@ static int ace_interrupt_checkstate(struct ace_device *ace)
         u32 sreg = ace_in32(ace, ACE_STATUS);
         u16 creg = ace_in(ace, ACE_CTRL);
 
-        /* Check for error occurance */
+        /* Check for error occurrence */
         if ((sreg & (ACE_STATUS_CFGERROR | ACE_STATUS_CFCERROR)) &&
             (creg & ACE_CTRL_ERRORIRQ)) {
                 dev_err(ace->dev, "transfer failure\n");
@@ -1169,7 +1169,7 @@ static int __devinit ace_probe(struct platform_device *dev)
                         irq = dev->resource[i].start;
         }
 
-        /* Call the bus-independant setup code */
+        /* Call the bus-independent setup code */
         return ace_alloc(&dev->dev, id, physaddr, irq, bus_width);
 }
 
@@ -1222,7 +1222,7 @@ static int __devinit ace_of_probe(struct platform_device *op)
         if (of_find_property(op->dev.of_node, "8-bit", NULL))
                 bus_width = ACE_BUS_WIDTH_8;
 
-        /* Call the bus-independant setup code */
+        /* Call the bus-independent setup code */
         return ace_alloc(&op->dev, id ? be32_to_cpup(id) : 0,
                                                 physaddr, irq, bus_width);
 }
diff --git a/drivers/bluetooth/hci_ll.c b/drivers/bluetooth/hci_ll.c
index 38595e782d0..7e4b435f79f 100644
--- a/drivers/bluetooth/hci_ll.c
+++ b/drivers/bluetooth/hci_ll.c
@@ -207,7 +207,7 @@ static void ll_device_want_to_wakeup(struct hci_uart *hu)
                 /*
                  * This state means that both the host and the BRF chip
                  * have simultaneously sent a wake-up-indication packet.
-                 * Traditionaly, in this case, receiving a wake-up-indication
+                 * Traditionally, in this case, receiving a wake-up-indication
                  * was enough and an additional wake-up-ack wasn't needed.
                  * This has changed with the BRF6350, which does require an
                  * explicit wake-up-ack. Other BRF versions, which do not
diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c
index e2c48a7eccf..514dd8efaf7 100644
--- a/drivers/cdrom/cdrom.c
+++ b/drivers/cdrom/cdrom.c
@@ -30,7 +30,7 @@
   changelog for the 1.x series, David?
 
 2.00  Dec  2, 1997 -- Erik Andersen <andersee@debian.org>
-  -- New maintainer! As David A. van Leeuwen has been too busy to activly
+  -- New maintainer! As David A. van Leeuwen has been too busy to actively
   maintain and improve this driver, I am now carrying on the torch. If
   you have a problem with this driver, please feel free to contact me.
 
@@ -2520,7 +2520,7 @@ static int cdrom_ioctl_drive_status(struct cdrom_device_info *cdi,
 /*
  * Ok, this is where problems start.  The current interface for the
  * CDROM_DISC_STATUS ioctl is flawed.  It makes the false assumption that
- * CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.  Unfortunatly, while this
+ * CDs are all CDS_DATA_1 or all CDS_AUDIO, etc.  Unfortunately, while this
  * is often the case, it is also very common for CDs to have some tracks
  * with data, and some tracks with audio.  Just because I feel like it,
  * I declare the following to be the best way to cope.  If the CD has ANY
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index 3e67ddde9e1..923f99df4f1 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -237,7 +237,7 @@ extern int agp_try_unsupported_boot;
 
 long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg);
 
-/* Chipset independant registers (from AGP Spec) */
+/* Chipset independent registers (from AGP Spec) */
 #define AGP_APBASE      0x10
 
 #define AGPSTAT         0x4
diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c
index 45681c0ff3b..f7e88787af9 100644
--- a/drivers/char/agp/amd-k7-agp.c
+++ b/drivers/char/agp/amd-k7-agp.c
@@ -272,7 +272,7 @@ static void amd_irongate_cleanup(void)
  * This routine could be implemented by taking the addresses
  * written to the GATT, and flushing them individually.  However
  * currently it just flushes the whole table.  Which is probably
- * more efficent, since agp_memory blocks can be a large number of
+ * more efficient, since agp_memory blocks can be a large number of
  * entries.
  */
 
diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c
index 13acaaf64ed..f02f9b07fd4 100644
--- a/drivers/char/agp/sworks-agp.c
+++ b/drivers/char/agp/sworks-agp.c
@@ -229,7 +229,7 @@ static int serverworks_fetch_size(void)
  * This routine could be implemented by taking the addresses
  * written to the GATT, and flushing them individually.  However
  * currently it just flushes the whole table.  Which is probably
- * more efficent, since agp_memory blocks can be a large number of
+ * more efficient, since agp_memory blocks can be a large number of
  * entries.
  */
 static void serverworks_tlbflush(struct agp_memory *temp)
diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c
index df67e80019d..8bc38493740 100644
--- a/drivers/char/agp/via-agp.c
+++ b/drivers/char/agp/via-agp.c
@@ -400,7 +400,7 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata =
          * the traditional AGP which resides only in chipset. AGP is used
          * by 3D driver which wasn't available for the VT3336 and VT3364
          * generation until now.  Unfortunately, by testing, VT3364 works
-         * but VT3336 doesn't. - explaination from via, just leave this as
+         * but VT3336 doesn't. - explanation from via, just leave this as
          * as a placeholder to avoid future patches adding it back in.
          */
 #if 0
diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c
index 0dec5da000e..2efa176beab 100644
--- a/drivers/char/ipmi/ipmi_poweroff.c
+++ b/drivers/char/ipmi/ipmi_poweroff.c
@@ -122,7 +122,7 @@ static struct ipmi_recv_msg halt_recv_msg = {
 
 
 /*
- * Code to send a message and wait for the reponse.
+ * Code to send a message and wait for the response.
  */
 
 static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index d28b484aee4..cc6c9b2546a 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -339,7 +339,7 @@ static void return_hosed_msg(struct smi_info *smi_info, int cCode)
                 cCode = IPMI_ERR_UNSPECIFIED;
         /* else use it as is */
 
-        /* Make it a reponse */
+        /* Make it a response */
         msg->rsp[0] = msg->data[0] | 4;
         msg->rsp[1] = msg->data[1];
         msg->rsp[2] = cCode;
@@ -2927,7 +2927,7 @@ static void return_hosed_msg_badsize(struct smi_info *smi_info)
 {
         struct ipmi_smi_msg *msg = smi_info->curr_msg;
 
-        /* Make it a reponse */
+        /* Make it a response */
         msg->rsp[0] = msg->data[0] | 4;
         msg->rsp[1] = msg->data[1];
         msg->rsp[2] = CANNOT_RETURN_REQUESTED_LENGTH;
diff --git a/drivers/char/mbcs.h b/drivers/char/mbcs.h
index ba671589f4c..1a36884c48b 100644
--- a/drivers/char/mbcs.h
+++ b/drivers/char/mbcs.h
@@ -36,13 +36,13 @@
 #define MBCS_RD_DMA_CTRL        0x0110  /* Read DMA Control */
 #define MBCS_RD_DMA_AMO_DEST    0x0118  /* Read DMA AMO Destination */
 #define MBCS_RD_DMA_INT_DEST    0x0120  /* Read DMA Interrupt Destination */
-#define MBCS_RD_DMA_AUX_STAT    0x0130  /* Read DMA Auxillary Status */
+#define MBCS_RD_DMA_AUX_STAT    0x0130  /* Read DMA Auxiliary Status */
 #define MBCS_WR_DMA_SYS_ADDR    0x0200  /* Write DMA System Address */
 #define MBCS_WR_DMA_LOC_ADDR    0x0208  /* Write DMA Local Address */
 #define MBCS_WR_DMA_CTRL        0x0210  /* Write DMA Control */
 #define MBCS_WR_DMA_AMO_DEST    0x0218  /* Write DMA AMO Destination */
 #define MBCS_WR_DMA_INT_DEST    0x0220  /* Write DMA Interrupt Destination */
-#define MBCS_WR_DMA_AUX_STAT    0x0230  /* Write DMA Auxillary Status */
+#define MBCS_WR_DMA_AUX_STAT    0x0230  /* Write DMA Auxiliary Status */
 #define MBCS_ALG_AMO_DEST       0x0300  /* Algorithm AMO Destination */
 #define MBCS_ALG_INT_DEST       0x0308  /* Algorithm Interrupt Destination */
 #define MBCS_ALG_OFFSETS        0x0310
diff --git a/drivers/char/mwave/3780i.h b/drivers/char/mwave/3780i.h
index 270431ca7da..fba6ab1160c 100644
--- a/drivers/char/mwave/3780i.h
+++ b/drivers/char/mwave/3780i.h
@@ -122,7 +122,7 @@ typedef struct {
 typedef struct {
         unsigned char Dma:3;    /* RW: DMA channel selection */
         unsigned char NumTransfers:2;   /* RW: Maximum # of transfers once being granted the ISA bus */
-        unsigned char ReRequest:2;      /* RW: Minumum delay between releasing the ISA bus and requesting it again */
+        unsigned char ReRequest:2;      /* RW: Minimum delay between releasing the ISA bus and requesting it again */
         unsigned char MEMCS16:1;        /* RW: ISA signal MEMCS16: 0=disabled, 1=enabled */
 } DSP_BUSMASTER_CFG_1;
 
diff --git a/drivers/char/nwbutton.c b/drivers/char/nwbutton.c
index 8994ce32e6c..04a480f86c6 100644
--- a/drivers/char/nwbutton.c
+++ b/drivers/char/nwbutton.c
@@ -75,7 +75,7 @@ int button_add_callback (void (*callback) (void), int count)
  * with -EINVAL. If there is more than one entry with the same address,
  * because it searches the list from end to beginning, it will unregister the
  * last one to be registered first (FILO- First In Last Out).
- * Note that this is not neccessarily true if the entries are not submitted
+ * Note that this is not necessarily true if the entries are not submitted
  * at the same time, because another driver could have unregistered a callback
  * between the submissions creating a gap earlier in the list, which would
  * be filled first at submission time.
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
index bcbbc71febb..90bd01671c7 100644
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@@ -806,7 +806,7 @@ static void monitor_card(unsigned long p)
                 dev->flags1 = 0x01;
                 xoutb(dev->flags1, REG_FLAGS1(iobase));
 
-                /* atr is present (which doesnt mean it's valid) */
+                /* atr is present (which doesn't mean it's valid) */
                 set_bit(IS_ATR_PRESENT, &dev->flags);
                 if (dev->atr[0] == 0x03)
                         str_invert_revert(dev->atr, dev->atr_len);
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
index beca80bb9bd..b575411c69b 100644
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@@ -1290,7 +1290,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
         /* Allocate and claim adapter resources */
         retval = claim_resources(info);
 
-        /* perform existance check and diagnostics */
+        /* perform existence check and diagnostics */
         if ( !retval )
                 retval = adapter_test(info);
 
@@ -2680,7 +2680,7 @@ static void rx_free_buffers(MGSLPC_INFO *info)
 static int claim_resources(MGSLPC_INFO *info)
 {
         if (rx_alloc_buffers(info) < 0 ) {
-                printk( "Cant allocate rx buffer %s\n", info->device_name);
+                printk( "Can't allocate rx buffer %s\n", info->device_name);
                 release_resources(info);
                 return -ENODEV;
         }
diff --git a/drivers/char/random.c b/drivers/char/random.c
index 5e29e8031bb..d4ddeba5668 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -732,7 +732,7 @@ static ssize_t extract_entropy(struct entropy_store *r, void *buf,
                                size_t nbytes, int min, int rsvd);
 
 /*
- * This utility inline function is responsible for transfering entropy
+ * This utility inline function is responsible for transferring entropy
  * from the primary pool to the secondary extraction pool. We make
  * sure we pull enough for a 'catastrophic reseed'.
  */
diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c
index 79e36c878a4..1ee8ce7d276 100644
--- a/drivers/char/sonypi.c
+++ b/drivers/char/sonypi.c
@@ -1241,7 +1241,7 @@ static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,
         while (check_ioport && check->port1) {
                 if (!request_region(check->port1,
                                    sonypi_device.region_size,
-                                   "Sony Programable I/O Device Check")) {
+                                   "Sony Programmable I/O Device Check")) {
                         printk(KERN_ERR "sonypi: ioport 0x%.4x busy, using sony-laptop? "
                                         "if not use check_ioport=0\n",
                                         check->port1);
@@ -1255,7 +1255,7 @@ static int __devinit sonypi_setup_ioports(struct sonypi_device *dev,
 
                 if (request_region(ioport_list->port1,
                                    sonypi_device.region_size,
-                                   "Sony Programable I/O Device")) {
+                                   "Sony Programmable I/O Device")) {
                         dev->ioport1 = ioport_list->port1;
                         dev->ioport2 = ioport_list->port2;
                         return 0;
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index d3c9d755ed9..d6412c16385 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -67,7 +67,7 @@
  * cp foo.bit /dev/icap0
  *
  * Note that unless foo.bit is an appropriately constructed partial
- * bitstream, this has a high likelyhood of overwriting the design
+ * bitstream, this has a high likelihood of overwriting the design
  * currently programmed in the FPGA.
  */
 
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b03771d4787..2dafc5c38ae 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1782,7 +1782,7 @@ error_out:
  *      cpufreq_update_policy - re-evaluate an existing cpufreq policy
  *      @cpu: CPU which shall be re-evaluated
  *
- *      Usefull for policy notifiers which have different necessities
+ *      Useful for policy notifiers which have different necessities
  *      at different times.
  */
 int cpufreq_update_policy(unsigned int cpu)
diff --git a/drivers/crypto/amcc/crypto4xx_sa.c b/drivers/crypto/amcc/crypto4xx_sa.c
index 466fd94cd4a..de8a7a48775 100644
--- a/drivers/crypto/amcc/crypto4xx_sa.c
+++ b/drivers/crypto/amcc/crypto4xx_sa.c
@@ -17,7 +17,7 @@
  * @file crypto4xx_sa.c
  *
  * This file implements the security context
- * assoicate format.
+ * associate format.
  */
 #include <linux/kernel.h>
 #include <linux/module.h>
diff --git a/drivers/crypto/amcc/crypto4xx_sa.h b/drivers/crypto/amcc/crypto4xx_sa.h
index 4b83ed7e557..1352d58d4e3 100644
--- a/drivers/crypto/amcc/crypto4xx_sa.h
+++ b/drivers/crypto/amcc/crypto4xx_sa.h
@@ -15,7 +15,7 @@
  * GNU General Public License for more details.
  *
  * This file defines the security context
- * assoicate format.
+ * associate format.
  */
 
 #ifndef __CRYPTO4XX_SA_H__
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index 0d662213c06..4c20c5bf605 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -1044,7 +1044,7 @@ static int aead_perform(struct aead_request *req, int encrypt,
         memcpy(crypt->iv, req->iv, ivsize);
 
         if (req->src != req->dst) {
-                BUG(); /* -ENOTSUP because of my lazyness */
+                BUG(); /* -ENOTSUP because of my laziness */
         }
 
         /* ASSOC data */
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index 3d7d705f026..235f53bf494 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -167,7 +167,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
 /**
  * atc_assign_cookie - compute and assign new cookie
  * @atchan: channel we work on
- * @desc: descriptor to asign cookie for
+ * @desc: descriptor to assign cookie for
  *
  * Called with atchan->lock held and bh disabled
  */
diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index 00deabd9a04..f48e5400651 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -529,7 +529,7 @@ static void coh901318_pause(struct dma_chan *chan)
         val = readl(virtbase + COH901318_CX_CFG +
                     COH901318_CX_CFG_SPACING * channel);
 
-        /* Stopping infinit transfer */
+        /* Stopping infinite transfer */
         if ((val & COH901318_CX_CTRL_TC_ENABLE) == 0 &&
             (val & COH901318_CX_CFG_CH_ENABLE))
                 cohc->stopped = 1;
diff --git a/drivers/dma/intel_mid_dma.c b/drivers/dma/intel_mid_dma.c
index 798f46a4590..3d4ec38b9b6 100644
--- a/drivers/dma/intel_mid_dma.c
+++ b/drivers/dma/intel_mid_dma.c
@@ -911,8 +911,8 @@ static int intel_mid_dma_alloc_chan_resources(struct dma_chan *chan)
 
 /**
  * midc_handle_error -  Handle DMA txn error
- * @mid: controller where error occured
- * @midc: chan where error occured
+ * @mid: controller where error occurred
+ * @midc: chan where error occurred
  *
  * Scan the descriptor for error
  */
@@ -1099,7 +1099,7 @@ static int mid_setup_dma(struct pci_dev *pdev)
                 dma->mask_reg = ioremap(LNW_PERIPHRAL_MASK_BASE,
                                         LNW_PERIPHRAL_MASK_SIZE);
                 if (dma->mask_reg == NULL) {
-                        pr_err("ERR_MDMA:Cant map periphral intr space !!\n");
+                        pr_err("ERR_MDMA:Can't map periphral intr space !!\n");
                         return -ENOMEM;
                 }
         } else
@@ -1373,7 +1373,7 @@ int dma_resume(struct pci_dev *pci)
         pci_restore_state(pci);
         ret = pci_enable_device(pci);
         if (ret) {
-                pr_err("MDMA: device cant be enabled for %x\n", pci->device);
+                pr_err("MDMA: device can't be enabled for %x\n", pci->device);
                 return ret;
         }
         device->state = RUNNING;
diff --git a/drivers/dma/intel_mid_dma_regs.h b/drivers/dma/intel_mid_dma_regs.h
index 709fecbdde7..aea5ee88ce0 100644
--- a/drivers/dma/intel_mid_dma_regs.h
+++ b/drivers/dma/intel_mid_dma_regs.h
@@ -174,8 +174,8 @@ union intel_mid_dma_cfg_hi {
  * @dma: dma device struture pointer
  * @busy: bool representing if ch is busy (active txn) or not
  * @in_use: bool representing if ch is in use or not
- * @raw_tfr: raw trf interrupt recieved
- * @raw_block: raw block interrupt recieved
+ * @raw_tfr: raw trf interrupt received
+ * @raw_block: raw block interrupt received
  */
 struct intel_mid_dma_chan {
         struct dma_chan         chan;
diff --git a/drivers/dma/mpc512x_dma.c b/drivers/dma/mpc512x_dma.c
index 4f95d31f5a2..b9bae94f201 100644
--- a/drivers/dma/mpc512x_dma.c
+++ b/drivers/dma/mpc512x_dma.c
@@ -328,7 +328,7 @@ static irqreturn_t mpc_dma_irq(int irq, void *data)
         return IRQ_HANDLED;
 }
 
-/* proccess completed descriptors */
+/* process completed descriptors */
 static void mpc_dma_process_completed(struct mpc_dma *mdma)
 {
         dma_cookie_t last_cookie = 0;
diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
index af955de035f..94ee15dd3ae 100644
--- a/drivers/dma/ste_dma40.c
+++ b/drivers/dma/ste_dma40.c
@@ -90,7 +90,7 @@ struct d40_lli_pool {
  * @lli_log: Same as above but for logical channels.
  * @lli_pool: The pool with two entries pre-allocated.
  * @lli_len: Number of llis of current descriptor.
- * @lli_current: Number of transfered llis.
+ * @lli_current: Number of transferred llis.
  * @lcla_alloc: Number of LCLA entries allocated.
  * @txd: DMA engine struct. Used for among other things for communication
  * during a transfer.
@@ -1214,7 +1214,7 @@ static void dma_tasklet(unsigned long data)
         return;
 
  err:
-        /* Rescue manouver if receiving double interrupts */
+        /* Rescue manoeuvre if receiving double interrupts */
         if (d40c->pending_tx > 0)
                 d40c->pending_tx--;
         spin_unlock_irqrestore(&d40c->lock, flags);
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index fac1a2002e6..af1a17d42bd 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -45,7 +45,7 @@ config EDAC_DECODE_MCE
         default y
         ---help---
           Enable this option if you want to decode Machine Check Exceptions
-          occuring on your machine in human-readable form.
+          occurring on your machine in human-readable form.
 
           You should definitely say Y here in case you want to decode MCEs
           which occur really early upon boot, before the module infrastructure
diff --git a/drivers/edac/cpc925_edac.c b/drivers/edac/cpc925_edac.c
index b9a781c47e3..837ad8f85b4 100644
--- a/drivers/edac/cpc925_edac.c
+++ b/drivers/edac/cpc925_edac.c
@@ -817,7 +817,7 @@ static void cpc925_del_edac_devices(void)
         }
 }
 
-/* Convert current back-ground scrub rate into byte/sec bandwith */
+/* Convert current back-ground scrub rate into byte/sec bandwidth */
 static int cpc925_get_sdram_scrub_rate(struct mem_ctl_info *mci)
 {
         struct cpc925_mc_pdata *pdata = mci->pvt_info;
diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h
index 3d965347a67..eefa3501916 100644
--- a/drivers/edac/edac_core.h
+++ b/drivers/edac/edac_core.h
@@ -164,7 +164,7 @@ enum mem_type {
 /* chipset Error Detection and Correction capabilities and mode */
 enum edac_type {
         EDAC_UNKNOWN = 0,       /* Unknown if ECC is available */
-        EDAC_NONE,              /* Doesnt support ECC */
+        EDAC_NONE,              /* Doesn't support ECC */
         EDAC_RESERVED,          /* Reserved ECC type */
         EDAC_PARITY,            /* Detects parity errors */
         EDAC_EC,                /* Error Checking - no correction */
@@ -233,7 +233,7 @@ enum scrub_type {
  *                      of these in parallel provides 64 bits which is common
  *                      for a memory stick.
  *
- * Memory Stick:        A printed circuit board that agregates multiple
+ * Memory Stick:        A printed circuit board that aggregates multiple
  *                      memory devices in parallel.  This is the atomic
  *                      memory component that is purchaseable by Joe consumer
  *                      and loaded into a memory socket.
@@ -385,7 +385,7 @@ struct mem_ctl_info {
 
         /* Get the current sdram memory scrub rate from the internal
            representation and converts it to the closest matching
-           bandwith in bytes/sec.
+           bandwidth in bytes/sec.
          */
         int (*get_sdram_scrub_rate) (struct mem_ctl_info * mci);
 
@@ -823,7 +823,7 @@ extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci,
  * There are a limited number of error logging registers that can
  * be exausted.  When all registers are exhausted and an additional
  * error occurs then an error overflow register records that an
- * error occured and the type of error, but doesn't have any
+ * error occurred and the type of error, but doesn't have any
  * further information.  The ce/ue versions make for cleaner
  * reporting logic and function interface - reduces conditional
  * statement clutter and extra function arguments.
diff --git a/drivers/edac/edac_device.c b/drivers/edac/edac_device.c
index d5e13c94714..a7408cf86f3 100644
--- a/drivers/edac/edac_device.c
+++ b/drivers/edac/edac_device.c
@@ -672,7 +672,7 @@ void edac_device_handle_ce(struct edac_device_ctl_info *edac_dev,
                 block->counters.ce_count++;
         }
 
-        /* Propogate the count up the 'totals' tree */
+        /* Propagate the count up the 'totals' tree */
         instance->counters.ce_count++;
         edac_dev->counters.ce_count++;
 
@@ -718,7 +718,7 @@ void edac_device_handle_ue(struct edac_device_ctl_info *edac_dev,
                 block->counters.ue_count++;
         }
 
-        /* Propogate the count up the 'totals' tree */
+        /* Propagate the count up the 'totals' tree */
         instance->counters.ue_count++;
         edac_dev->counters.ue_count++;
 
diff --git a/drivers/edac/edac_device_sysfs.c b/drivers/edac/edac_device_sysfs.c
index 400de071cab..86649df0028 100644
--- a/drivers/edac/edac_device_sysfs.c
+++ b/drivers/edac/edac_device_sysfs.c
@@ -533,7 +533,7 @@ static int edac_device_create_block(struct edac_device_ctl_info *edac_dev,
         memset(&block->kobj, 0, sizeof(struct kobject));
 
         /* bump the main kobject's reference count for this controller
-         * and this instance is dependant on the main
+         * and this instance is dependent on the main
          */
         main_kobj = kobject_get(&edac_dev->kobj);
         if (!main_kobj) {
@@ -635,7 +635,7 @@ static int edac_device_create_instance(struct edac_device_ctl_info *edac_dev,
         instance->ctl = edac_dev;
 
         /* bump the main kobject's reference count for this controller
-         * and this instance is dependant on the main
+         * and this instance is dependent on the main
          */
         main_kobj = kobject_get(&edac_dev->kobj);
         if (!main_kobj) {
diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c
index a4e9db2d652..1d805604907 100644
--- a/drivers/edac/edac_mc.c
+++ b/drivers/edac/edac_mc.c
@@ -724,7 +724,7 @@ void edac_mc_handle_ce(struct mem_ctl_info *mci,
                  * Some MC's can remap memory so that it is still available
                  * at a different address when PCI devices map into memory.
                  * MC's that can't do this lose the memory where PCI devices
-                 * are mapped.  This mapping is MC dependant and so we call
+                 * are mapped.  This mapping is MC dependent and so we call
                  * back into the MC driver for it to map the MC page to
                  * a physical (CPU) page which can then be mapped to a virtual
                  * page - which can then be scrubbed.
diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c
index 73196f7b722..26343fd4659 100644
--- a/drivers/edac/edac_mc_sysfs.c
+++ b/drivers/edac/edac_mc_sysfs.c
@@ -850,7 +850,7 @@ static void edac_remove_mci_instance_attributes(struct mem_ctl_info *mci,
 
         /*
          * loop if there are attributes and until we hit a NULL entry
-         * Remove first all the atributes
+         * Remove first all the attributes
          */
         while (sysfs_attrib) {
                 debugf4("%s() sysfs_attrib = %p\n",__func__, sysfs_attrib);
diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c
index 023b01cb517..495198ad059 100644
--- a/drivers/edac/edac_pci_sysfs.c
+++ b/drivers/edac/edac_pci_sysfs.c
@@ -352,7 +352,7 @@ static int edac_pci_main_kobj_setup(void)
                 return 0;
 
         /* First time, so create the main kobject and its
-         * controls and atributes
+         * controls and attributes
          */
         edac_class = edac_get_sysfs_class();
         if (edac_class == NULL) {
@@ -551,7 +551,7 @@ static void edac_pci_dev_parity_clear(struct pci_dev *dev)
 /*
  *  PCI Parity polling
  *
- *      Fucntion to retrieve the current parity status
+ *      Function to retrieve the current parity status
  *      and decode it
  *
  */
diff --git a/drivers/edac/i5000_edac.c b/drivers/edac/i5000_edac.c
index a5cefab8d65..87f427c2ce5 100644
--- a/drivers/edac/i5000_edac.c
+++ b/drivers/edac/i5000_edac.c
@@ -1372,7 +1372,7 @@ static int i5000_probe1(struct pci_dev *pdev, int dev_idx)
          * actual number of slots/dimms per channel, we thus utilize the
          * resource as specified by the chipset. Thus, we might have
          * have more DIMMs per channel than actually on the mobo, but this
-         * allows the driver to support upto the chipset max, without
+         * allows the driver to support up to the chipset max, without
          * some fancy mobo determination.
          */
         i5000_get_dimm_and_channel_counts(pdev, &num_dimms_per_channel,
diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c
index 0448da0af75..bcbdeeca48b 100644
--- a/drivers/edac/i5100_edac.c
+++ b/drivers/edac/i5100_edac.c
@@ -11,7 +11,7 @@
  *
  * The intel 5100 has two independent channels. EDAC core currently
  * can not reflect this configuration so instead the chip-select
- * rows for each respective channel are layed out one after another,
+ * rows for each respective channel are laid out one after another,
  * the first half belonging to channel 0, the second half belonging
  * to channel 1.
  */
diff --git a/drivers/edac/i5400_edac.c b/drivers/edac/i5400_edac.c
index 38a9be9e1c7..80a465efbae 100644
--- a/drivers/edac/i5400_edac.c
+++ b/drivers/edac/i5400_edac.c
@@ -648,7 +648,7 @@ static void i5400_process_nonfatal_error_info(struct mem_ctl_info *mci,
                 return;
         }
 
-        /* Miscelaneous errors */
+        /* Miscellaneous errors */
         errnum = find_first_bit(&allErrors, ARRAY_SIZE(error_name));
 
         branch = extract_fbdchan_indx(info->ferr_nf_fbd);
@@ -1240,7 +1240,7 @@ static int i5400_probe1(struct pci_dev *pdev, int dev_idx)
          * actual number of slots/dimms per channel, we thus utilize the
          * resource as specified by the chipset. Thus, we might have
          * have more DIMMs per channel than actually on the mobo, but this
-         * allows the driver to support upto the chipset max, without
+         * allows the driver to support up to the chipset max, without
          * some fancy mobo determination.
          */
         num_dimms_per_channel = MAX_DIMMS_PER_CHANNEL;
diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c
index 76d1f576cdc..363cc160294 100644
--- a/drivers/edac/i7300_edac.c
+++ b/drivers/edac/i7300_edac.c
@@ -1065,7 +1065,7 @@ static int __devinit i7300_init_one(struct pci_dev *pdev,
          * actual number of slots/dimms per channel, we thus utilize the
          * resource as specified by the chipset. Thus, we might have
          * have more DIMMs per channel than actually on the mobo, but this
-         * allows the driver to support upto the chipset max, without
+         * allows the driver to support up to the chipset max, without
          * some fancy mobo determination.
          */
         num_dimms_per_channel = MAX_SLOTS;
diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c
index 81154ab296b..465cbc25149 100644
--- a/drivers/edac/i7core_edac.c
+++ b/drivers/edac/i7core_edac.c
@@ -1772,7 +1772,7 @@ static void i7core_check_error(struct mem_ctl_info *mci)
         /*
          * MCE first step: Copy all mce errors into a temporary buffer
          * We use a double buffering here, to reduce the risk of
-         * loosing an error.
+         * losing an error.
          */
         smp_rmb();
         count = (pvt->mce_out + MCE_LOG_LEN - pvt->mce_in)
diff --git a/drivers/edac/i82443bxgx_edac.c b/drivers/edac/i82443bxgx_edac.c
index 678405ab04e..4329d39f902 100644
--- a/drivers/edac/i82443bxgx_edac.c
+++ b/drivers/edac/i82443bxgx_edac.c
@@ -203,7 +203,7 @@ static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
                 row_high_limit = ((u32) drbar << 23);
                 /* find the DRAM Chip Select Base address and mask */
                 debugf1("MC%d: %s: %s() Row=%d, "
-                        "Boundry Address=%#0x, Last = %#0x\n",
+                        "Boundary Address=%#0x, Last = %#0x\n",
                         mci->mc_idx, __FILE__, __func__, index, row_high_limit,
                         row_high_limit_last);
 
@@ -305,7 +305,7 @@ static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
         i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);
 
         /* Many BIOSes don't clear error flags on boot, so do this
-         * here, or we get "phantom" errors occuring at module-load
+         * here, or we get "phantom" errors occurring at module-load
          * time. */
         pci_write_bits32(pdev, I82443BXGX_EAP,
                         (I82443BXGX_EAP_OFFSET_SBE |
diff --git a/drivers/edac/mce_amd_inj.c b/drivers/edac/mce_amd_inj.c
index 733a7e7a8d6..a4987e03f59 100644
--- a/drivers/edac/mce_amd_inj.c
+++ b/drivers/edac/mce_amd_inj.c
@@ -90,7 +90,7 @@ static ssize_t edac_inject_bank_store(struct kobject *kobj,
 
         if (value > 5)
                 if (boot_cpu_data.x86 != 0x15 || value > 6) {
-                        printk(KERN_ERR "Non-existant MCE bank: %lu\n", value);
+                        printk(KERN_ERR "Non-existent MCE bank: %lu\n", value);
                         return -EINVAL;
                 }
 
diff --git a/drivers/edac/r82600_edac.c b/drivers/edac/r82600_edac.c
index 6a822c631ef..678513738c3 100644
--- a/drivers/edac/r82600_edac.c
+++ b/drivers/edac/r82600_edac.c
@@ -120,7 +120,7 @@
                                  *        write 0=NOP
                                  */
 
-#define R82600_DRBA     0x60    /* + 0x60..0x63 SDRAM Row Boundry Address
+#define R82600_DRBA     0x60    /* + 0x60..0x63 SDRAM Row Boundary Address
                                  *  Registers
                                  *
                                  * 7:0  Address lines 30:24 - upper limit of
@@ -217,7 +217,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
 {
         struct csrow_info *csrow;
         int index;
-        u8 drbar;               /* SDRAM Row Boundry Address Register */
+        u8 drbar;               /* SDRAM Row Boundary Address Register */
         u32 row_high_limit, row_high_limit_last;
         u32 reg_sdram, ecc_on, row_base;
 
@@ -236,7 +236,7 @@ static void r82600_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev,
                 row_high_limit = ((u32) drbar << 24);
 /*              row_high_limit = ((u32)drbar << 24) | 0xffffffUL; */
 
-                debugf1("%s() Row=%d, Boundry Address=%#0x, Last = %#0x\n",
+                debugf1("%s() Row=%d, Boundary Address=%#0x, Last = %#0x\n",
                         __func__, index, row_high_limit, row_high_limit_last);
 
                 /* Empty row [p.57] */
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 7ed08fd1214..3f04dd3681c 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -453,7 +453,7 @@ static bool fwnet_pd_update(struct fwnet_peer *peer,
         memcpy(pd->pbuf + frag_off, frag_buf, frag_len);
 
         /*
-         * Move list entry to beginnig of list so that oldest partial
+         * Move list entry to beginning of list so that oldest partial
          * datagrams percolate to the end of the list
          */
         list_move_tail(&pd->pd_link, &peer->pd_list);
diff --git a/drivers/gpio/mc33880.c b/drivers/gpio/mc33880.c
index 00f6d24c669..4ec797593bd 100644
--- a/drivers/gpio/mc33880.c
+++ b/drivers/gpio/mc33880.c
@@ -45,7 +45,7 @@
  * To save time we cache them here in memory
  */
 struct mc33880 {
-        struct mutex    lock;   /* protect from simultanous accesses */
+        struct mutex    lock;   /* protect from simultaneous accesses */
         u8              port_config;
         struct gpio_chip chip;
         struct spi_device *spi;
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index 799e1490cf2..872747c5a54 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -1699,7 +1699,7 @@ int drm_mode_addfb(struct drm_device *dev,
 
         mutex_lock(&dev->mode_config.mutex);
 
-        /* TODO check buffer is sufficently large */
+        /* TODO check buffer is sufficiently large */
         /* TODO setup destructor callback */
 
         fb = dev->mode_config.funcs->fb_create(dev, file_priv, r);
@@ -1750,7 +1750,7 @@ int drm_mode_rmfb(struct drm_device *dev,
 
         mutex_lock(&dev->mode_config.mutex);
         obj = drm_mode_object_find(dev, *id, DRM_MODE_OBJECT_FB);
-        /* TODO check that we realy get a framebuffer back. */
+        /* TODO check that we really get a framebuffer back. */
         if (!obj) {
                 DRM_ERROR("mode invalid framebuffer id\n");
                 ret = -EINVAL;
diff --git a/drivers/gpu/drm/drm_mm.c b/drivers/gpu/drm/drm_mm.c
index add1737dae0..5d00b0fc0d9 100644
--- a/drivers/gpu/drm/drm_mm.c
+++ b/drivers/gpu/drm/drm_mm.c
@@ -551,7 +551,7 @@ EXPORT_SYMBOL(drm_mm_scan_add_block);
  * corrupted.
  *
  * When the scan list is empty, the selected memory nodes can be freed. An
- * immediatly following drm_mm_search_free with best_match = 0 will then return
+ * immediately following drm_mm_search_free with best_match = 0 will then return
  * the just freed block (because its at the top of the free_stack list).
  *
  * Returns one if this block should be evicted, zero otherwise. Will always
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 5004724ea57..1c1b27c97e5 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -630,7 +630,7 @@ typedef struct drm_i915_private {
                  * Flag if the hardware appears to be wedged.
                  *
                  * This is set when attempts to idle the device timeout.
-                 * It prevents command submission from occuring and makes
+                 * It prevents command submission from occurring and makes
                  * every pending request fail
                  */
                 atomic_t wedged;
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 0daefca5cbb..cb8578b7e44 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -213,7 +213,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
                         return MODE_PANEL;
         }
 
-        /* only refuse the mode on non eDP since we have seen some wierd eDP panels
+        /* only refuse the mode on non eDP since we have seen some weird eDP panels
            which are outside spec tolerances but somehow work by magic */
         if (!is_edp(intel_dp) &&
             (intel_dp_link_required(connector->dev, intel_dp, mode->clock)
diff --git a/drivers/gpu/drm/i915/intel_sdvo_regs.h b/drivers/gpu/drm/i915/intel_sdvo_regs.h
index a386b022e53..4f4e23bc2d1 100644
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -230,7 +230,7 @@ struct intel_sdvo_set_target_input_args {
 } __attribute__((packed));
 
 /**
- * Takes a struct intel_sdvo_output_flags of which outputs are targetted by
+ * Takes a struct intel_sdvo_output_flags of which outputs are targeted by
  * future output commands.
  *
  * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
diff --git a/drivers/gpu/drm/mga/mga_dma.c b/drivers/gpu/drm/mga/mga_dma.c
index 1e1eb1d7e97..5ccb65deb83 100644
--- a/drivers/gpu/drm/mga/mga_dma.c
+++ b/drivers/gpu/drm/mga/mga_dma.c
@@ -426,7 +426,7 @@ int mga_driver_load(struct drm_device *dev, unsigned long flags)
  * Bootstrap the driver for AGP DMA.
  *
  * \todo
- * Investigate whether there is any benifit to storing the WARP microcode in
+ * Investigate whether there is any benefit to storing the WARP microcode in
  * AGP memory.  If not, the microcode may as well always be put in PCI
  * memory.
  *
diff --git a/drivers/gpu/drm/nouveau/nouveau_channel.c b/drivers/gpu/drm/nouveau/nouveau_channel.c
index 3837090d66a..4cea35c57d1 100644
--- a/drivers/gpu/drm/nouveau/nouveau_channel.c
+++ b/drivers/gpu/drm/nouveau/nouveau_channel.c
@@ -200,7 +200,7 @@ nouveau_channel_alloc(struct drm_device *dev, struct nouveau_channel **chan_ret,
         /* disable the fifo caches */
         pfifo->reassign(dev, false);
 
-        /* Construct inital RAMFC for new channel */
+        /* Construct initial RAMFC for new channel */
         ret = pfifo->create_context(chan);
         if (ret) {
                 nouveau_channel_put(&chan);
@@ -278,7 +278,7 @@ nouveau_channel_put_unlocked(struct nouveau_channel **pchan)
                 return;
         }
 
-        /* noone wants the channel anymore */
+        /* no one wants the channel anymore */
         NV_DEBUG(dev, "freeing channel %d\n", chan->id);
         nouveau_debugfs_channel_fini(chan);
 
diff --git a/drivers/gpu/drm/nouveau/nouveau_drv.h b/drivers/gpu/drm/nouveau/nouveau_drv.h
index fff180a9986..57e5302503d 100644
--- a/drivers/gpu/drm/nouveau/nouveau_drv.h
+++ b/drivers/gpu/drm/nouveau/nouveau_drv.h
@@ -216,7 +216,7 @@ struct nouveau_channel {
         /* mapping of the fifo itself */
         struct drm_local_map *map;
 
-        /* mapping of the regs controling the fifo */
+        /* mapping of the regs controlling the fifo */
         void __iomem *user;
         uint32_t user_get;
         uint32_t user_put;
diff --git a/drivers/gpu/drm/nouveau/nouveau_state.c b/drivers/gpu/drm/nouveau/nouveau_state.c
index 4fcbd091a11..5bb2859001e 100644
--- a/drivers/gpu/drm/nouveau/nouveau_state.c
+++ b/drivers/gpu/drm/nouveau/nouveau_state.c
@@ -963,7 +963,7 @@ int nouveau_load(struct drm_device *dev, unsigned long flags)
         if (ret)
                 goto err_mmio;
 
-        /* Map PRAMIN BAR, or on older cards, the aperture withing BAR0 */
+        /* Map PRAMIN BAR, or on older cards, the aperture within BAR0 */
         if (dev_priv->card_type >= NV_40) {
                 int ramin_bar = 2;
                 if (pci_resource_len(dev->pdev, ramin_bar) == 0)
diff --git a/drivers/gpu/drm/nouveau/nv04_crtc.c b/drivers/gpu/drm/nouveau/nv04_crtc.c
index a260fbbe3d9..748b9d9c294 100644
--- a/drivers/gpu/drm/nouveau/nv04_crtc.c
+++ b/drivers/gpu/drm/nouveau/nv04_crtc.c
@@ -164,7 +164,7 @@ nv_crtc_dpms(struct drm_crtc *crtc, int mode)
         NV_DEBUG_KMS(dev, "Setting dpms mode %d on CRTC %d\n", mode,
                                                         nv_crtc->index);
 
-        if (nv_crtc->last_dpms == mode) /* Don't do unnecesary mode changes. */
+        if (nv_crtc->last_dpms == mode) /* Don't do unnecessary mode changes. */
                 return;
 
         nv_crtc->last_dpms = mode;
@@ -677,7 +677,7 @@ static void nv_crtc_prepare(struct drm_crtc *crtc)
 
         NVBlankScreen(dev, nv_crtc->index, true);
 
-        /* Some more preperation. */
+        /* Some more preparation. */
         NVWriteCRTC(dev, nv_crtc->index, NV_PCRTC_CONFIG, NV_PCRTC_CONFIG_START_ADDRESS_NON_VGA);
         if (dev_priv->card_type == NV_40) {
                 uint32_t reg900 = NVReadRAMDAC(dev, nv_crtc->index, NV_PRAMDAC_900);
diff --git a/drivers/gpu/drm/nouveau/nv40_graph.c b/drivers/gpu/drm/nouveau/nv40_graph.c
index 18d30c2c1aa..fceb44c0ec7 100644
--- a/drivers/gpu/drm/nouveau/nv40_graph.c
+++ b/drivers/gpu/drm/nouveau/nv40_graph.c
@@ -181,7 +181,7 @@ nv40_graph_load_context(struct nouveau_channel *chan)
                   NV40_PGRAPH_CTXCTL_CUR_LOADED);
         /* 0x32E0 records the instance address of the active FIFO's PGRAPH
          * context.  If at any time this doesn't match 0x40032C, you will
-         * recieve PGRAPH_INTR_CONTEXT_SWITCH
+         * receive PGRAPH_INTR_CONTEXT_SWITCH
          */
         nv_wr32(dev, NV40_PFIFO_GRCTX_INSTANCE, inst);
         return 0;
diff --git a/drivers/gpu/drm/radeon/atombios.h b/drivers/gpu/drm/radeon/atombios.h
index 04b269d14a5..7fd88497b93 100644
--- a/drivers/gpu/drm/radeon/atombios.h
+++ b/drivers/gpu/drm/radeon/atombios.h
@@ -738,13 +738,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V3
 {
 #if ATOM_BIG_ENDIAN
     UCHAR ucReserved1:1;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved:3;
     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
 #else
     UCHAR ucDPLinkRate:1;         // =0: 1.62Ghz, =1: 2.7Ghz
     UCHAR ucReserved:3;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved1:1;
 #endif
 }ATOM_DIG_ENCODER_CONFIG_V3;
@@ -785,13 +785,13 @@ typedef struct _ATOM_DIG_ENCODER_CONFIG_V4
 {
 #if ATOM_BIG_ENDIAN
     UCHAR ucReserved1:1;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved:2;
     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
 #else
     UCHAR ucDPLinkRate:2;         // =0: 1.62Ghz, =1: 2.7Ghz, 2=5.4Ghz    <= Changed comparing to previous version
     UCHAR ucReserved:2;
-    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also refered as DIGA/B/C/D/E/F)
+    UCHAR ucDigSel:3;             // =0/1/2/3/4/5: DIG0/1/2/3/4/5 (In register spec also referred as DIGA/B/C/D/E/F)
     UCHAR ucReserved1:1;
 #endif
 }ATOM_DIG_ENCODER_CONFIG_V4;
@@ -2126,7 +2126,7 @@ typedef struct _ATOM_MULTIMEDIA_CONFIG_INFO
 // Structures used in FirmwareInfoTable
 /****************************************************************************/  
 
-// usBIOSCapability Defintion:
+// usBIOSCapability Definition:
 // Bit 0 = 0: Bios image is not Posted, =1:Bios image is Posted; 
 // Bit 1 = 0: Dual CRTC is not supported, =1: Dual CRTC is supported; 
 // Bit 2 = 0: Extended Desktop is not supported, =1: Extended Desktop is supported; 
@@ -3341,7 +3341,7 @@ typedef struct _ATOM_SPREAD_SPECTRUM_INFO
 /****************************************************************************/  
 // Structure used in AnalogTV_InfoTable (Top level)
 /****************************************************************************/  
-//ucTVBootUpDefaultStd definiton:
+//ucTVBootUpDefaultStd definition:
 
 //ATOM_TV_NTSC                1
 //ATOM_TV_NTSCJ               2
@@ -3816,7 +3816,7 @@ typedef  struct _ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO
   UCHAR                    Reserved [6];                          // for potential expansion
 }ATOM_EXTERNAL_DISPLAY_CONNECTION_INFO;
 
-//Related definitions, all records are differnt but they have a commond header
+//Related definitions, all records are different but they have a commond header
 typedef struct _ATOM_COMMON_RECORD_HEADER
 {
   UCHAR               ucRecordType;                      //An emun to indicate the record type
@@ -4365,14 +4365,14 @@ ucUMAChannelNumber:      	        System memory channel numbers.
 ulCSR_M3_ARB_CNTL_DEFAULT[10]:    Arrays with values for CSR M3 arbiter for default
 ulCSR_M3_ARB_CNTL_UVD[10]:        Arrays with values for CSR M3 arbiter for UVD playback.
 ulCSR_M3_ARB_CNTL_FS3D[10]:       Arrays with values for CSR M3 arbiter for Full Screen 3D applications.
-sAvail_SCLK[5]:                   Arrays to provide availabe list of SLCK and corresponding voltage, order from low to high  
+sAvail_SCLK[5]:                   Arrays to provide available list of SLCK and corresponding voltage, order from low to high  
 ulGMCRestoreResetTime:            GMC power restore and GMC reset time to calculate data reconnection latency. Unit in ns. 
 ulMinimumNClk:                    Minimum NCLK speed among all NB-Pstates to calcualte data reconnection latency. Unit in 10kHz. 
 ulIdleNClk:                       NCLK speed while memory runs in self-refresh state. Unit in 10kHz.
 ulDDR_DLL_PowerUpTime:            DDR PHY DLL power up time. Unit in ns.
 ulDDR_PLL_PowerUpTime:            DDR PHY PLL power up time. Unit in ns.
-usPCIEClkSSPercentage:            PCIE Clock Spred Spectrum Percentage in unit 0.01%; 100 mean 1%.
-usPCIEClkSSType:                  PCIE Clock Spred Spectrum Type. 0 for Down spread(default); 1 for Center spread.
+usPCIEClkSSPercentage:            PCIE Clock Spread Spectrum Percentage in unit 0.01%; 100 mean 1%.
+usPCIEClkSSType:                  PCIE Clock Spread Spectrum Type. 0 for Down spread(default); 1 for Center spread.
 usLvdsSSPercentage:               LVDS panel ( not include eDP ) Spread Spectrum Percentage in unit of 0.01%, =0, use VBIOS default setting. 
 usLvdsSSpreadRateIn10Hz:          LVDS panel ( not include eDP ) Spread Spectrum frequency in unit of 10Hz, =0, use VBIOS default setting. 
 usHDMISSPercentage:               HDMI Spread Spectrum Percentage in unit 0.01%; 100 mean 1%,  =0, use VBIOS default setting. 
@@ -4555,7 +4555,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LITEAC 3
 #define ATOM_S0_SYSTEM_POWER_STATE_VALUE_LIT2AC 4
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S0_CRT1_MONOb0             0x01
 #define ATOM_S0_CRT1_COLORb0            0x02
 #define ATOM_S0_CRT1_MASKb0             (ATOM_S0_CRT1_MONOb0+ATOM_S0_CRT1_COLORb0)
@@ -4621,7 +4621,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S2_DISPLAY_ROTATION_ANGLE_MASK   0xC0000000L
 
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S2_TV1_STANDARD_MASKb0     0x0F
 #define ATOM_S2_CURRENT_BL_LEVEL_MASKb1 0xFF
 #define ATOM_S2_DEVICE_DPMS_STATEb2     0x01
@@ -4671,7 +4671,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S3_ALLOW_FAST_PWR_SWITCH   0x40000000L
 #define ATOM_S3_RQST_GPU_USE_MIN_PWR    0x80000000L
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S3_CRT1_ACTIVEb0           0x01
 #define ATOM_S3_LCD1_ACTIVEb0           0x02
 #define ATOM_S3_TV1_ACTIVEb0            0x04
@@ -4707,7 +4707,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S4_LCD1_REFRESH_MASK       0x0000FF00L
 #define ATOM_S4_LCD1_REFRESH_SHIFT      8
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S4_LCD1_PANEL_ID_MASKb0      0x0FF
 #define ATOM_S4_LCD1_REFRESH_MASKb1               ATOM_S4_LCD1_PANEL_ID_MASKb0
 #define ATOM_S4_VRAM_INFO_MASKb2        ATOM_S4_LCD1_PANEL_ID_MASKb0
@@ -4786,7 +4786,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3
 #define ATOM_S6_VRI_BRIGHTNESS_CHANGE       0x40000000L
 #define ATOM_S6_CONFIG_DISPLAY_CHANGE_MASK  0x80000000L
 
-//Byte aligned defintion for BIOS usage
+//Byte aligned definition for BIOS usage
 #define ATOM_S6_DEVICE_CHANGEb0         0x01
 #define ATOM_S6_SCALER_CHANGEb0         0x02
 #define ATOM_S6_LID_CHANGEb0            0x04
@@ -5027,7 +5027,7 @@ typedef struct _ENABLE_GRAPH_SURFACE_PS_ALLOCATION
 
 typedef struct _MEMORY_CLEAN_UP_PARAMETERS
 {
-  USHORT  usMemoryStart;                //in 8Kb boundry, offset from memory base address
+  USHORT  usMemoryStart;                //in 8Kb boundary, offset from memory base address
   USHORT  usMemorySize;                 //8Kb blocks aligned
 }MEMORY_CLEAN_UP_PARAMETERS;
 #define MEMORY_CLEAN_UP_PS_ALLOCATION MEMORY_CLEAN_UP_PARAMETERS
@@ -6855,7 +6855,7 @@ typedef struct _ATOM_PPLIB_Clock_Voltage_Limit_Table
 /**************************************************************************/
 
 
-// Following definitions are for compatiblity issue in different SW components. 
+// Following definitions are for compatibility issue in different SW components. 
 #define ATOM_MASTER_DATA_TABLE_REVISION   0x01
 #define Object_Info                                                                                             Object_Header                   
 #define AdjustARB_SEQ                                                                                   MC_InitParameter
diff --git a/drivers/gpu/drm/radeon/evergreen_cs.c b/drivers/gpu/drm/radeon/evergreen_cs.c
index edde90b3755..23d36417158 100644
--- a/drivers/gpu/drm/radeon/evergreen_cs.c
+++ b/drivers/gpu/drm/radeon/evergreen_cs.c
@@ -442,7 +442,7 @@ static inline int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u3
         }
         ib = p->ib->ptr;
         switch (reg) {
-        /* force following reg to 0 in an attemp to disable out buffer
+        /* force following reg to 0 in an attempt to disable out buffer
          * which will need us to better understand how it works to perform
          * security check on it (Jerome)
          */
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index 8713731fa01..55a7f190027 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -437,7 +437,7 @@ int r300_asic_reset(struct radeon_device *rdev)
         status = RREG32(R_000E40_RBBM_STATUS);
         dev_info(rdev->dev, "(%s:%d) RBBM_STATUS=0x%08X\n", __func__, __LINE__, status);
         /* resetting the CP seems to be problematic sometimes it end up
-         * hard locking the computer, but it's necessary for successfull
+         * hard locking the computer, but it's necessary for successful
          * reset more test & playing is needed on R3XX/R4XX to find a
          * reliable (if any solution)
          */
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index f0bce399c9f..00c0d2ba22d 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -608,7 +608,7 @@
  * My guess is that there are two bits for each zbias primitive
  * (FILL, LINE, POINT).
  *  One to enable depth test and one for depth write.
- * Yet this doesnt explain why depth writes work ...
+ * Yet this doesn't explain why depth writes work ...
  */
 #define R300_RE_OCCLUSION_CNTL              0x42B4
 #       define R300_OCCLUSION_ON                (1<<1)
@@ -817,7 +817,7 @@
 #       define R300_TX_MIN_FILTER_LINEAR_MIP_NEAREST        (6  <<  11)
 #       define R300_TX_MIN_FILTER_LINEAR_MIP_LINEAR         (10 <<  11)
 
-/* NOTE: NEAREST doesnt seem to exist.
+/* NOTE: NEAREST doesn't seem to exist.
  * Im not seting MAG_FILTER_MASK and (3 << 11) on for all
  * anisotropy modes because that would void selected mag filter
  */
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 3324620b2db..fd18be9871a 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -921,7 +921,7 @@ static inline int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx
                 return 0;
         ib = p->ib->ptr;
         switch (reg) {
-        /* force following reg to 0 in an attemp to disable out buffer
+        /* force following reg to 0 in an attempt to disable out buffer
          * which will need us to better understand how it works to perform
          * security check on it (Jerome)
          */
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index 50db6d62eec..f5ac7e788d8 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -334,7 +334,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
         r600_hdmi_videoinfoframe(encoder, RGB, 0, 0, 0, 0,
                 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
 
-        /* it's unknown what these bits do excatly, but it's indeed quite usefull for debugging */
+        /* it's unknown what these bits do excatly, but it's indeed quite useful for debugging */
         WREG32(offset+R600_HDMI_AUDIO_DEBUG_0, 0x00FFFFFF);
         WREG32(offset+R600_HDMI_AUDIO_DEBUG_1, 0x007FFFFF);
         WREG32(offset+R600_HDMI_AUDIO_DEBUG_2, 0x00000001);
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index cfe3af1a793..93f536594c7 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -679,11 +679,11 @@ struct radeon_wb {
  * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP)
  * @ht_bandwidth:       ht bandwidth the gpu has (MByte/s) (IGP)
  * @core_bandwidth:     core GPU bandwidth the gpu has (MByte/s) (IGP)
- * @sclk:               GPU clock Mhz (core bandwith depends of this clock)
+ * @sclk:               GPU clock Mhz (core bandwidth depends of this clock)
  * @needed_bandwidth:   current bandwidth needs
  *
  * It keeps track of various data needed to take powermanagement decision.
- * Bandwith need is used to determine minimun clock of the GPU and memory.
+ * Bandwidth need is used to determine minimun clock of the GPU and memory.
  * Equation between gpu/memory clock and available bandwidth is hw dependent
  * (type of memory, bus size, efficiency, ...)
  */
diff --git a/drivers/gpu/drm/radeon/radeon_cp.c b/drivers/gpu/drm/radeon/radeon_cp.c
index 3d599e33b9c..75867792a4e 100644
--- a/drivers/gpu/drm/radeon/radeon_cp.c
+++ b/drivers/gpu/drm/radeon/radeon_cp.c
@@ -244,7 +244,7 @@ void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base)
         u32 agp_base_lo = agp_base & 0xffffffff;
         u32 r6xx_agp_base = (agp_base >> 22) & 0x3ffff;
 
-        /* R6xx/R7xx must be aligned to a 4MB boundry */
+        /* R6xx/R7xx must be aligned to a 4MB boundary */
         if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV770)
                 RADEON_WRITE(R700_MC_VM_AGP_BASE, r6xx_agp_base);
         else if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R600)
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 017ac54920f..bdf2fa1189a 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -226,7 +226,7 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
                 y += crtc->y;
                 DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
 
-                /* avivo cursor image can't end on 128 pixel boundry or
+                /* avivo cursor image can't end on 128 pixel boundary or
                  * go past the end of the frame if both crtcs are enabled
                  */
                 list_for_each_entry(crtc_p, &crtc->dev->mode_config.crtc_list, head) {
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f0209be7a34..890217e678d 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -262,7 +262,7 @@ int radeon_wb_init(struct radeon_device *rdev)
  * Note: GTT start, end, size should be initialized before calling this
  * function on AGP platform.
  *
- * Note: We don't explictly enforce VRAM start to be aligned on VRAM size,
+ * Note: We don't explicitly enforce VRAM start to be aligned on VRAM size,
  * this shouldn't be a problem as we are using the PCI aperture as a reference.
  * Otherwise this would be needed for rv280, all r3xx, and all r4xx, but
  * not IGP.
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 4be58793dc1..bdbab5c43bd 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -1492,7 +1492,7 @@ bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
  *
  * \return Flags, or'ed together as follows:
  *
- * DRM_SCANOUTPOS_VALID = Query successfull.
+ * DRM_SCANOUTPOS_VALID = Query successful.
  * DRM_SCANOUTPOS_INVBL = Inside vblank.
  * DRM_SCANOUTPOS_ACCURATE = Returned position is accurate. A lack of
  * this flag means that returned position may be offset by a constant but
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index 5cba46b9779..a1b59ca96d0 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -271,7 +271,7 @@ typedef struct drm_radeon_private {
 
         int have_z_offset;
 
-        /* starting from here on, data is preserved accross an open */
+        /* starting from here on, data is preserved across an open */
         uint32_t flags;         /* see radeon_chip_flags */
         resource_size_t fb_aper_offset;
 
diff --git a/drivers/gpu/drm/radeon/radeon_object.h b/drivers/gpu/drm/radeon/radeon_object.h
index 7f8e778dba4..ede6c13628f 100644
--- a/drivers/gpu/drm/radeon/radeon_object.h
+++ b/drivers/gpu/drm/radeon/radeon_object.h
@@ -87,7 +87,7 @@ static inline void radeon_bo_unreserve(struct radeon_bo *bo)
  * Returns current GPU offset of the object.
  *
  * Note: object should either be pinned or reserved when calling this
- * function, it might be usefull to add check for this for debugging.
+ * function, it might be useful to add check for this for debugging.
  */
 static inline u64 radeon_bo_gpu_offset(struct radeon_bo *bo)
 {
diff --git a/drivers/gpu/drm/radeon/radeon_state.c b/drivers/gpu/drm/radeon/radeon_state.c
index 4ae5a3d1074..92e7ea73b7c 100644
--- a/drivers/gpu/drm/radeon/radeon_state.c
+++ b/drivers/gpu/drm/radeon/radeon_state.c
@@ -980,7 +980,7 @@ static void radeon_cp_dispatch_clear(struct drm_device * dev,
         }
 
         /* hyper z clear */
-        /* no docs available, based on reverse engeneering by Stephane Marchesin */
+        /* no docs available, based on reverse engineering by Stephane Marchesin */
         if ((flags & (RADEON_DEPTH | RADEON_STENCIL))
             && (flags & RADEON_CLEAR_FASTZ)) {
 
diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
index cceeb42789b..dfe32e62bd9 100644
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
@@ -245,7 +245,7 @@ void vmw_kms_cursor_snoop(struct vmw_surface *srf,
                 /* TODO handle none page aligned offsets */
                 /* TODO handle partial uploads and pitch != 256 */
                 /* TODO handle more then one copy (size != 64) */
-                DRM_ERROR("lazy programer, cant handle wierd stuff\n");
+                DRM_ERROR("lazy programmer, can't handle weird stuff\n");
                 return;
         }
 
diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index ace2b1623b2..be8d4cb5861 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -151,7 +151,7 @@ static inline void vga_irq_set_state(struct vga_device *vgadev, bool state)
 static void vga_check_first_use(void)
 {
         /* we should inform all GPUs in the system that
-         * VGA arb has occured and to try and disable resources
+         * VGA arb has occurred and to try and disable resources
          * if they can */
         if (!vga_arbiter_used) {
                 vga_arbiter_used = true;
@@ -774,7 +774,7 @@ static ssize_t vga_arb_read(struct file *file, char __user * buf,
          */
         spin_lock_irqsave(&vga_lock, flags);
 
-        /* If we are targetting the default, use it */
+        /* If we are targeting the default, use it */
         pdev = priv->target;
         if (pdev == NULL || pdev == PCI_INVALID_CARD) {
                 spin_unlock_irqrestore(&vga_lock, flags);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index e9687768a33..453e7e6da0c 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -306,7 +306,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
         case HID_GLOBAL_ITEM_TAG_PUSH:
 
                 if (parser->global_stack_ptr == HID_GLOBAL_STACK_SIZE) {
-                        dbg_hid("global enviroment stack overflow\n");
+                        dbg_hid("global environment stack overflow\n");
                         return -1;
                 }
 
@@ -317,7 +317,7 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
         case HID_GLOBAL_ITEM_TAG_POP:
 
                 if (!parser->global_stack_ptr) {
-                        dbg_hid("global enviroment stack underflow\n");
+                        dbg_hid("global environment stack underflow\n");
                         return -1;
                 }
 
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index 555382fc741..bae48745bb4 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -341,7 +341,7 @@ static const struct hid_usage_entry hid_usage_table[] = {
     { 0x85, 0x83, "DesignCapacity" },
     { 0x85, 0x85, "ManufacturerDate" },
     { 0x85, 0x89, "iDeviceChemistry" },
-    { 0x85, 0x8b, "Rechargable" },
+    { 0x85, 0x8b, "Rechargeable" },
     { 0x85, 0x8f, "iOEMInformation" },
     { 0x85, 0x8d, "CapacityGranularity1" },
     { 0x85, 0xd0, "ACPresent" },
diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
index 318cc40df92..7a613734609 100644
--- a/drivers/hid/hid-magicmouse.c
+++ b/drivers/hid/hid-magicmouse.c
@@ -76,7 +76,7 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie
  * This is true when single_touch_id is equal to NO_TOUCHES. If multiple touches
  * are down and the touch providing for single touch emulation is lifted,
  * single_touch_id is equal to SINGLE_TOUCH_UP. While single touch emulation is
- * occuring, single_touch_id corresponds with the tracking id of the touch used.
+ * occurring, single_touch_id corresponds with the tracking id of the touch used.
  */
 #define NO_TOUCHES -1
 #define SINGLE_TOUCH_UP -2
diff --git a/drivers/hid/hid-picolcd.c b/drivers/hid/hid-picolcd.c
index 657da5a3d5c..b2f56a13bcf 100644
--- a/drivers/hid/hid-picolcd.c
+++ b/drivers/hid/hid-picolcd.c
@@ -1806,13 +1806,13 @@ static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u,
 /*
  * Notes:
  * - concurrent writing is prevented by mutex and all writes must be
- *   n*64 bytes and 64-byte aligned, each write being preceeded by an
+ *   n*64 bytes and 64-byte aligned, each write being preceded by an
  *   ERASE which erases a 64byte block.
  *   If less than requested was written or an error is returned for an
  *   otherwise correct write request the next 64-byte block which should
  *   have been written is in undefined state (mostly: original, erased,
  *   (half-)written with write error)
- * - reading can happend without special restriction
+ * - reading can happen without special restriction
  */
 static const struct file_operations picolcd_debug_flash_fops = {
         .owner    = THIS_MODULE,
diff --git a/drivers/hid/hid-roccat-kone.h b/drivers/hid/hid-roccat-kone.h
index 64abb5b8a59..4109a028e13 100644
--- a/drivers/hid/hid-roccat-kone.h
+++ b/drivers/hid/hid-roccat-kone.h
@@ -166,7 +166,7 @@ enum kone_mouse_events {
         /* osd events are thought to be display on screen */
         kone_mouse_event_osd_dpi = 0xa0,
         kone_mouse_event_osd_profile = 0xb0,
-        /* TODO clarify meaning and occurence of kone_mouse_event_calibration */
+        /* TODO clarify meaning and occurrence of kone_mouse_event_calibration */
         kone_mouse_event_calibration = 0xc0,
         kone_mouse_event_call_overlong_macro = 0xe0,
         /* switch events notify if user changed values with mousebutton click */
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 0e05aa179ea..e7d4c4687f0 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -1422,7 +1422,7 @@ static int __init abituguru_detect(void)
            at DATA and 0xAC, when this driver has already been loaded once
            DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either
            scenario but some will hold 0x00.
-           Some uGuru's initally hold 0x09 at DATA and will only hold 0x08
+           Some uGuru's initially hold 0x09 at DATA and will only hold 0x08
            after reading CMD first, so CMD must be read first! */
         u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD);
         u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA);
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 034cebfcd27..e89d572e332 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -151,7 +151,7 @@ struct abituguru3_data {
         /* Pointer to the sensors info for the detected motherboard */
         const struct abituguru3_sensor_info *sensors;
 
-        /* The abituguru3 supports upto 48 sensors, and thus has registers
+        /* The abituguru3 supports up to 48 sensors, and thus has registers
            sets for 48 sensors, for convienence reasons / simplicity of the
            code we always read and store all registers for all 48 sensors */
 
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index be0fdd58aa2..0531867484f 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -175,7 +175,7 @@ static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
  * these macros are called: arguments may be evaluated more than once.
  */
 
-/* IN are scaled acording to built-in resistors.  These are the
+/* IN are scaled according to built-in resistors.  These are the
  *   voltages corresponding to 3/4 of full scale (192 or 0xc0)
  *   NOTE: The -12V input needs an additional factor to account
  *      for the Vref pullup resistor.
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index cf47e6e476e..250d099ca39 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -130,7 +130,7 @@ enum chips {
    these macros are called: arguments may be evaluated more than once.
  */
 
-/* IN are scaled acording to built-in resistors */
+/* IN are scaled according to built-in resistors */
 static const int lm85_scaling[] = {  /* .001 Volts */
         2500, 2250, 3300, 5000, 12000,
         3300, 1500, 1800 /*EMC6D100*/
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 812781c655a..c43b4e9f96a 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -356,7 +356,7 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
         /*
          * There is a trick here. We have to read two registers to have the
          * sensor temperature, but we have to beware a conversion could occur
-         * inbetween the readings. The datasheet says we should either use
+         * between the readings. The datasheet says we should either use
          * the one-shot conversion register, which we don't want to do
          * (disables hardware monitoring) or monitor the busy bit, which is
          * impossible (we can't read the values and monitor that bit at the
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 1a9c32d6893..f4e617adb22 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -52,7 +52,7 @@
 #define SHT15_TSU               150     /* data setup time */
 
 /**
- * struct sht15_temppair - elements of voltage dependant temp calc
+ * struct sht15_temppair - elements of voltage dependent temp calc
  * @vdd:        supply voltage in microvolts
  * @d1:         see data sheet
  */
@@ -251,7 +251,7 @@ static inline int sht15_update_single_val(struct sht15_data *data,
         enable_irq(gpio_to_irq(data->pdata->gpio_data));
         if (gpio_get_value(data->pdata->gpio_data) == 0) {
                 disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
-                /* Only relevant if the interrupt hasn't occured. */
+                /* Only relevant if the interrupt hasn't occurred. */
                 if (!atomic_read(&data->interrupt_handled))
                         schedule_work(&data->read_work);
         }
@@ -452,7 +452,7 @@ static void sht15_bh_read_data(struct work_struct *work_s)
                 */
                 atomic_set(&data->interrupt_handled, 0);
                 enable_irq(gpio_to_irq(data->pdata->gpio_data));
-                /* If still not occured or another handler has been scheduled */
+                /* If still not occurred or another handler has been scheduled */
                 if (gpio_get_value(data->pdata->gpio_data)
                     || atomic_read(&data->interrupt_handled))
                         return;
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 93187c3cb5e..5bd19496880 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -166,7 +166,7 @@ static int __devinit tmp102_probe(struct i2c_client *client,
 
         if (!i2c_check_functionality(client->adapter,
                                      I2C_FUNC_SMBUS_WORD_DATA)) {
-                dev_err(&client->dev, "adapter doesnt support SMBus word "
+                dev_err(&client->dev, "adapter doesn't support SMBus word "
                         "transactions\n");
                 return -ENODEV;
         }
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 400a88bde27..17cf1ab9552 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -556,7 +556,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
 
 /* Note: we save and restore the fan minimum here, because its value is
    determined in part by the fan divisor.  This follows the principle of
-   least suprise; the user doesn't expect the fan minimum to change just
+   least surprise; the user doesn't expect the fan minimum to change just
    because the divisor changed. */
 static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
                                 const char *buf, size_t count)
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 63841f8cec0..f3e7130c4cd 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -244,7 +244,7 @@ FAN_TO_REG(long rpm, int div)
 #define TEMP1_TO_REG(val)       (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
                                         : (val)) / 1000, 0, 0xff))
 #define TEMP1_FROM_REG(val)     (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
-/* for temp2 and temp3, because they need addtional resolution */
+/* for temp2 and temp3, because they need additional resolution */
 #define TEMP_ADD_FROM_REG(val1, val2) \
         ((((val1) & 0x80 ? (val1)-0x100 \
                 : (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index e3bdedfb534..854f9117f1a 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1921,7 +1921,7 @@ static void w83793_update_nonvolatile(struct device *dev)
         struct w83793_data *data = i2c_get_clientdata(client);
         int i, j;
         /*
-           They are somewhat "stable" registers, and to update them everytime
+           They are somewhat "stable" registers, and to update them every time
            takes so much time, it's just not worthy. Update them in a long
            interval to avoid exception.
          */
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 2b9a8f54bb2..4ca9cf9cde7 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -343,7 +343,7 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
 
         ret = curmsg;
  out:
-        DEB1("}}} transfered %d/%d messages. "
+        DEB1("}}} transferred %d/%d messages. "
              "status is %#04x. control is %#04x\n",
              curmsg, num, pca_status(adap),
              pca_get_con(adap));
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 906a3ca50db..dd364171f9c 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -295,7 +295,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
         }
 
         /* Unfortunately the ALI SMB controller maps "no response" and "bus
-         * collision" into a single bit. No reponse is the usual case so don't
+         * collision" into a single bit. No response is the usual case so don't
          * do a printk.  This means that bus collisions go unreported.
          */
         if (temp & ALI1535_STS_BUSERR) {
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index b14f6d68221..83e8a60cdc8 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -318,7 +318,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
 
         /*
           Unfortunately the ALI SMB controller maps "no response" and "bus
-          collision" into a single bit. No reponse is the usual case so don't
+          collision" into a single bit. No response is the usual case so don't
           do a printk.
           This means that bus collisions go unreported.
         */
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 5795c8398c7..a76d85fa3ad 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -355,7 +355,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
         /*
          * Write mode register first as needed for correct behaviour
          * on OMAP-L138, but don't set STT yet to avoid a race with XRDY
-         * occuring before we have loaded DXR
+         * occurring before we have loaded DXR
          */
         davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, flag);
 
diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c
index b664ed8bbdb..b7a51c43b18 100644
--- a/drivers/i2c/busses/i2c-designware.c
+++ b/drivers/i2c/busses/i2c-designware.c
@@ -178,7 +178,7 @@ static char *abort_sources[] = {
  * @lock: protect this struct and IO registers
  * @clk: input reference clock
  * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transfered
+ * @msgs: points to an array of messages currently being transferred
  * @msgs_num: the number of elements in msgs
  * @msg_write_idx: the element index of the current tx message in the msgs
  *      array
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index e5b1a3bf5b8..37e2e82a9c8 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -22,7 +22,7 @@
 /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
    Frodo Looijaard <frodol@dds.nl> */
 
-/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of
+/* Partially rewriten by Oleg I. Vdovikin for mmapped support of
    for Alpha Processor Inc. UP-2000(+) boards */
 
 #include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index ed2e0c5ea37..72c0415f6f9 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -96,7 +96,7 @@
 #define SMBHSTCFG_SMB_SMI_EN    2
 #define SMBHSTCFG_I2C_EN        4
 
-/* Auxillary control register bits, ICH4+ only */
+/* Auxiliary control register bits, ICH4+ only */
 #define SMBAUXCTL_CRC           1
 #define SMBAUXCTL_E32B          2
 
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index e4f88dca99b..3c110fbc409 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -494,7 +494,7 @@ static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm,
                 if (unlikely(ret < 0))
                         break;
                 else if (unlikely(ret != count)){
-                        DBG("%d: xfer_bytes, requested %d, transfered %d\n",
+                        DBG("%d: xfer_bytes, requested %d, transferred %d\n",
                                 dev->idx, count, ret);
 
                         /* If it's not a last part of xfer, abort it */
@@ -593,7 +593,7 @@ static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
         if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){
                 DBG("%d: iic_xfer, bus is not free\n", dev->idx);
 
-                /* Usually it means something serious has happend.
+                /* Usually it means something serious has happened.
                  * We *cannot* have unfinished previous transfer
                  * so it doesn't make any sense to try to stop it.
                  * Probably we were not able to recover from the
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
index c71492782bb..e828ac85cfa 100644
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ b/drivers/i2c/busses/i2c-intel-mid.c
@@ -170,8 +170,8 @@ struct intel_mid_i2c_private {
 /* Raw Interrupt Status Register */
 #define IC_RAW_INTR_STAT        0x34            /* Read Only */
 #define GEN_CALL                (1 << 11)       /* General call */
-#define START_DET               (1 << 10)       /* (RE)START occured */
-#define STOP_DET                (1 << 9)        /* STOP occured */
+#define START_DET               (1 << 10)       /* (RE)START occurred */
+#define STOP_DET                (1 << 9)        /* STOP occurred */
 #define ACTIVITY                (1 << 8)        /* Bus busy */
 #define RX_DONE                 (1 << 7)        /* Not used in Master mode */
 #define TX_ABRT                 (1 << 6)        /* Transmit Abort */
@@ -375,7 +375,7 @@ static int intel_mid_i2c_disable(struct i2c_adapter *adap)
  * I2C should be disabled prior to other register operation. If failed, an
  * errno is returned. Mask and Clear all interrpts, this should be done at
  * first.  Set common registers which will not be modified during normal
- * transfers, including: controll register, FIFO threshold and clock freq.
+ * transfers, including: control register, FIFO threshold and clock freq.
  * Check APB data width at last.
  */
 static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
@@ -455,7 +455,7 @@ static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
  *
  * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
  * distingushed. At present, no circumstances have been found out that
- * multiple errors would be occured simutaneously, so we simply use the
+ * multiple errors would be occurred simutaneously, so we simply use the
  * register value directly.
  *
  * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
@@ -469,7 +469,7 @@ static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
 
         /* Single transfer error check:
          * According to databook, TX/RX FIFOs would be flushed when
-         * the abort interrupt occured.
+         * the abort interrupt occurred.
          */
         if (abort & ABRT_MASTER_DIS)
                 dev_err(&adap->dev,
@@ -569,7 +569,7 @@ static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
  * Return Values:
  * 0    if the read transfer succeeds
  * -ETIMEDOUT   if we cannot read the "raw" interrupt register
- * -EINVAL      if a transfer abort occured
+ * -EINVAL      if a transfer abort occurred
  *
  * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
  * data transfer. The actual "write" operation will be performed when the
@@ -697,7 +697,7 @@ static int intel_mid_i2c_setup(struct i2c_adapter *adap,  struct i2c_msg *pmsg)
  * @num: number of i2c_msg
  *
  * Return Values:
- * +            number of messages transfered
+ * +            number of messages transferred
  * -ETIMEDOUT   If cannot disable I2C controller or read IC_STATUS
  * -EINVAL      If the address in i2c_msg is invalid
  *
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index ddc258edb34..0682f8f277b 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -141,7 +141,7 @@ static int sch_transaction(void)
  * This is the main access entry for i2c-sch access
  * adap is i2c_adapter pointer, addr is the i2c device bus address, read_write
  * (0 for read and 1 for write), size is i2c transaction type and data is the
- * union of transaction for data to be transfered or data read from bus.
+ * union of transaction for data to be transferred or data read from bus.
  * return 0 for success and others for failure.
  */
 static s32 sch_access(struct i2c_adapter *adap, u16 addr,
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index caf96dc8ca1..7e78f7c8785 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -149,7 +149,7 @@ static void mxs_i2c_pioq_setup_write(struct mxs_i2c_dev *i2c,
          * We have to copy the slave address (u8) and buffer (arbitrary number
          * of u8) into the data register (u32). To achieve that, the u8 are put
          * into the MSBs of 'data' which is then shifted for the next u8. When
-         * apropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
+         * appropriate, 'data' is written to MXS_I2C_DATA. So, the first u32
          * looks like this:
          *
          *  3          2          1          0
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 594ed5059c4..e10e5cf3751 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -126,9 +126,9 @@ enum i2c_operation {
 /**
  * struct i2c_nmk_client - client specific data
  * @slave_adr: 7-bit slave address
- * @count: no. bytes to be transfered
+ * @count: no. bytes to be transferred
  * @buffer: client data buffer
- * @xfer_bytes: bytes transfered till now
+ * @xfer_bytes: bytes transferred till now
  * @operation: current I2C operation
  */
 struct i2c_nmk_client {
@@ -330,7 +330,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
          * slsu defines the data setup time after SCL clock
          * stretching in terms of i2c clk cycles. The
          * needed setup time for the three modes are 250ns,
-         * 100ns, 10ns repectively thus leading to the values
+         * 100ns, 10ns respectively thus leading to the values
          * of 14, 6, 2 for a 48 MHz i2c clk.
          */
         writel(dev->cfg.slsu << 16, dev->virtbase + I2C_SCR);
@@ -364,7 +364,7 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
         /*
          * set the speed mode. Currently we support
          * only standard and fast mode of operation
-         * TODO - support for fast mode plus (upto 1Mb/s)
+         * TODO - support for fast mode plus (up to 1Mb/s)
          * and high speed (up to 3.4 Mb/s)
          */
         if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index cadc0216e02..cb5d01e279c 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -318,7 +318,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev)
         rc = request_irq(iface->irq, s6i2c_interrupt_entry,
                          IRQF_SHARED, dev->name, iface);
         if (rc) {
-                dev_err(&p_adap->dev, "s6i2c: cant get IRQ %d\n", iface->irq);
+                dev_err(&p_adap->dev, "s6i2c: can't get IRQ %d\n", iface->irq);
                 goto err_clk_dis;
         }
 
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 266135ddf7f..99879617e68 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -497,7 +497,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
         u32 val;
         int i = 0;
 
-        /* Locate the apropriate clock setting */
+        /* Locate the appropriate clock setting */
         while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
                stu300_clktable[i].rate < clkrate)
                 i++;
@@ -644,7 +644,7 @@ static int stu300_send_address(struct stu300_dev *dev,
         ret = stu300_await_event(dev, STU300_EVENT_6);
 
         /*
-         * Clear any pending EVENT 6 no matter what happend during
+         * Clear any pending EVENT 6 no matter what happened during
          * await_event.
          */
         val = stu300_r8(dev->virtbase + I2C_CR);
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 3921f664c9c..b4ab39b741e 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -386,7 +386,7 @@ static irqreturn_t tegra_i2c_isr(int irq, void *dev_id)
                 dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
         return IRQ_HANDLED;
 err:
-        /* An error occured, mask all interrupts */
+        /* An error occurred, mask all interrupts */
         tegra_i2c_mask_irq(i2c_dev, I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST |
                 I2C_INT_PACKET_XFER_COMPLETE | I2C_INT_TX_FIFO_DATA_REQ |
                 I2C_INT_RX_FIFO_DATA_REQ);
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 9fbd7e6fe32..e9d5ff4d149 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -21,7 +21,7 @@
  * to the automotive development board Russellville. The copyright holder
  * as seen in the header is Intel corporation.
  * Mocean Laboratories forked off the GNU/Linux platform work into a
- * separate company called Pelagicore AB, which commited the code to the
+ * separate company called Pelagicore AB, which committed the code to the
  * kernel.
  */
 
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index e5f76a0372f..70c30e6bce0 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -348,7 +348,7 @@ EXPORT_SYMBOL(i2c_verify_client);
 
 
 /* This is a permissive address validity check, I2C address map constraints
- * are purposedly not enforced, except for the general call address. */
+ * are purposely not enforced, except for the general call address. */
 static int i2c_check_client_addr_validity(const struct i2c_client *client)
 {
         if (client->flags & I2C_CLIENT_TEN) {
diff --git a/drivers/ide/cy82c693.c b/drivers/ide/cy82c693.c
index 9383f67deae..3be60da5212 100644
--- a/drivers/ide/cy82c693.c
+++ b/drivers/ide/cy82c693.c
@@ -67,7 +67,7 @@ static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
         /*
          * note: below we set the value for Bus Master IDE TimeOut Register
-         * I'm not absolutly sure what this does, but it solved my problem
+         * I'm not absolutely sure what this does, but it solved my problem
          * with IDE DMA and sound, so I now can play sound and work with
          * my IDE driver at the same time :-)
          *
diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
index 5406b6ea3ad..5a702d02c84 100644
--- a/drivers/ide/ide-floppy.c
+++ b/drivers/ide/ide-floppy.c
@@ -107,7 +107,7 @@ static int ide_floppy_callback(ide_drive_t *drive, int dsc)
 static void ide_floppy_report_error(struct ide_disk_obj *floppy,
                                     struct ide_atapi_pc *pc)
 {
-        /* supress error messages resulting from Medium not present */
+        /* suppress error messages resulting from Medium not present */
         if (floppy->sense_key == 0x02 &&
             floppy->asc       == 0x3a &&
             floppy->ascq      == 0x00)
diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c
index 34b9872f35d..600c89a3d13 100644
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -201,7 +201,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive)
         u8 stat;
 
         /*
-         * Last sector was transfered, wait until device is ready.  This can
+         * Last sector was transferred, wait until device is ready.  This can
          * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms.
          */
         for (retries = 0; retries < 1000; retries++) {
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 1bdca49e5a0..b59d04c7205 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -8,8 +8,8 @@
  *
  * Documentation:
  *
- *      Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
+ *      Publicly available from Intel web site. Errata documentation
+ * is also publicly available. As an aide to anyone hacking on this
  * driver the list of errata that are relevant is below.going back to
  * PIIX4. Older device documentation is now a bit tricky to find.
  *
diff --git a/drivers/ide/sis5513.c b/drivers/ide/sis5513.c
index db7f4e761db..4a002256775 100644
--- a/drivers/ide/sis5513.c
+++ b/drivers/ide/sis5513.c
@@ -53,7 +53,7 @@
 
 #define DRV_NAME "sis5513"
 
-/* registers layout and init values are chipset family dependant */
+/* registers layout and init values are chipset family dependent */
 
 #define ATA_16          0x01
 #define ATA_33          0x02
@@ -406,7 +406,7 @@ static int __devinit sis_find_family(struct pci_dev *dev)
                                         pci_name(dev));
                                 chipset_family = ATA_133;
 
-                                /* Check for 5513 compability mapping
+                                /* Check for 5513 compatibility mapping
                                  * We must use this, else the port enabled code will fail,
                                  * as it expects the enablebits at 0x4a.
                                  */
diff --git a/drivers/ide/triflex.c b/drivers/ide/triflex.c
index 7953447eae0..e53a1b78378 100644
--- a/drivers/ide/triflex.c
+++ b/drivers/ide/triflex.c
@@ -22,7 +22,7 @@
  * Loosely based on the piix & svwks drivers.
  *
  * Documentation:
- *      Not publically available.
+ *      Not publicly available.
  */
 
 #include <linux/types.h>
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index d2a0997b78f..f46f49cfcc2 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -14,7 +14,7 @@
  *      Andre Hedrick
  *
  * Documentation:
- *      Obsolete device documentation publically available from via.com.tw
+ *      Obsolete device documentation publicly available from via.com.tw
  *      Current device documentation available under NDA only
  */
 
diff --git a/drivers/infiniband/hw/amso1100/c2_ae.c b/drivers/infiniband/hw/amso1100/c2_ae.c
index 62af74295db..24f9e3a90e8 100644
--- a/drivers/infiniband/hw/amso1100/c2_ae.c
+++ b/drivers/infiniband/hw/amso1100/c2_ae.c
@@ -157,7 +157,7 @@ void c2_ae_event(struct c2_dev *c2dev, u32 mq_index)
         int status;
 
         /*
-         * retreive the message
+         * retrieve the message
          */
         wr = c2_mq_consume(mq);
         if (!wr)
diff --git a/drivers/infiniband/hw/amso1100/c2_qp.c b/drivers/infiniband/hw/amso1100/c2_qp.c
index d8f4bb8bf42..0d7b6f23caf 100644
--- a/drivers/infiniband/hw/amso1100/c2_qp.c
+++ b/drivers/infiniband/hw/amso1100/c2_qp.c
@@ -612,7 +612,7 @@ void c2_free_qp(struct c2_dev *c2dev, struct c2_qp *qp)
         c2_unlock_cqs(send_cq, recv_cq);
 
         /*
-         * Destory qp in the rnic...
+         * Destroy qp in the rnic...
          */
         destroy_qp(c2dev, qp);
 
diff --git a/drivers/infiniband/hw/amso1100/c2_wr.h b/drivers/infiniband/hw/amso1100/c2_wr.h
index c65fbdd6e46..8d4b4ca463c 100644
--- a/drivers/infiniband/hw/amso1100/c2_wr.h
+++ b/drivers/infiniband/hw/amso1100/c2_wr.h
@@ -131,7 +131,7 @@ enum c2wr_ids {
          *          All the preceding IDs are fixed, and must not change.
          *          You can add new IDs, but must not remove or reorder
          *          any IDs. If you do, YOU will ruin any hope of
-         *          compatability between versions.
+         *          compatibility between versions.
          */
         CCWR_LAST,
 
@@ -242,7 +242,7 @@ enum c2_acf {
 /*
  *  to fix bug 1815 we define the max size allowable of the
  *  terminate message (per the IETF spec).Refer to the IETF
- *  protocal specification, section 12.1.6, page 64)
+ *  protocol specification, section 12.1.6, page 64)
  *  The message is prefixed by 20 types of DDP info.
  *
  *  Then the message has 6 bytes for the terminate control
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 47db4bf3462..58c0e417bc3 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -2392,7 +2392,7 @@ void ipath_shutdown_device(struct ipath_devdata *dd)
         /*
          * clear SerdesEnable and turn the leds off; do this here because
          * we are unloading, so don't count on interrupts to move along
-         * Turn the LEDs off explictly for the same reason.
+         * Turn the LEDs off explicitly for the same reason.
          */
         dd->ipath_f_quiet_serdes(dd);
 
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 6d4b29c4cd8..ee79a2d97b1 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1972,7 +1972,7 @@ static int ipath_do_user_init(struct file *fp,
          * 0 to 1.  So for those chips, we turn it off and then back on.
          * This will (very briefly) affect any other open ports, but the
          * duration is very short, and therefore isn't an issue.  We
-         * explictly set the in-memory tail copy to 0 beforehand, so we
+         * explicitly set the in-memory tail copy to 0 beforehand, so we
          * don't have to wait to be sure the DMA update has happened
          * (chip resets head/tail to 0 on transition to enable).
          */
diff --git a/drivers/infiniband/hw/ipath/ipath_init_chip.c b/drivers/infiniband/hw/ipath/ipath_init_chip.c
index fef0f420125..7c1eebe8c7c 100644
--- a/drivers/infiniband/hw/ipath/ipath_init_chip.c
+++ b/drivers/infiniband/hw/ipath/ipath_init_chip.c
@@ -335,7 +335,7 @@ done:
  * @dd: the infinipath device
  *
  * sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explictly, in case reset
+ * ensure no receive or transmit (explicitly, in case reset
  * failed
  */
 static int init_chip_reset(struct ipath_devdata *dd)
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 7420715256a..e8a2a915251 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -86,7 +86,7 @@ static void ipath_ud_loopback(struct ipath_qp *sqp, struct ipath_swqe *swqe)
         }
 
         /*
-         * A GRH is expected to preceed the data even if not
+         * A GRH is expected to precede the data even if not
          * present on the wire.
          */
         length = swqe->length;
@@ -515,7 +515,7 @@ void ipath_ud_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
         }
 
         /*
-         * A GRH is expected to preceed the data even if not
+         * A GRH is expected to precede the data even if not
          * present on the wire.
          */
         wc.byte_len = tlen + sizeof(struct ib_grh);
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.c b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
index be78f6643c0..f5cb13b2144 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.c
@@ -236,7 +236,7 @@ static int ipath_user_sdma_num_pages(const struct iovec *iov)
         return 1 + ((epage - spage) >> PAGE_SHIFT);
 }
 
-/* truncate length to page boundry */
+/* truncate length to page boundary */
 static int ipath_user_sdma_page_length(unsigned long addr, unsigned long len)
 {
         const unsigned long offset = addr & ~PAGE_MASK;
diff --git a/drivers/infiniband/hw/nes/nes_cm.c b/drivers/infiniband/hw/nes/nes_cm.c
index cfa3a2b2223..33c7eedaba6 100644
--- a/drivers/infiniband/hw/nes/nes_cm.c
+++ b/drivers/infiniband/hw/nes/nes_cm.c
@@ -1397,7 +1397,7 @@ static void handle_fin_pkt(struct nes_cm_node *cm_node)
                 cleanup_retrans_entry(cm_node);
                 cm_node->state = NES_CM_STATE_CLOSING;
                 send_ack(cm_node, NULL);
-                /* Wait for ACK as this is simultanous close..
+                /* Wait for ACK as this is simultaneous close..
                 * After we receive ACK, do not send anything..
                 * Just rm the node.. Done.. */
                 break;
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 08c194861af..10d0a5ec9ad 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -80,7 +80,7 @@ static void nes_terminate_start_timer(struct nes_qp *nesqp);
 
 #ifdef CONFIG_INFINIBAND_NES_DEBUG
 static unsigned char *nes_iwarp_state_str[] = {
-        "Non-Existant",
+        "Non-Existent",
         "Idle",
         "RTS",
         "Closing",
@@ -91,7 +91,7 @@ static unsigned char *nes_iwarp_state_str[] = {
 };
 
 static unsigned char *nes_tcp_state_str[] = {
-        "Non-Existant",
+        "Non-Existent",
         "Closed",
         "Listen",
         "SYN Sent",
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 2c9c1933bbe..e96b8fb5d44 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -902,7 +902,7 @@ static void nes_netdev_set_multicast_list(struct net_device *netdev)
                 nes_write_indexed(nesdev, NES_IDX_NIC_UNICAST_ALL, nic_active);
         }
 
-        nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscous = %d, All Multicast = %d.\n",
+        nes_debug(NES_DBG_NIC_RX, "Number of MC entries = %d, Promiscuous = %d, All Multicast = %d.\n",
                   mc_count, !!(netdev->flags & IFF_PROMISC),
                   !!(netdev->flags & IFF_ALLMULTI));
         if (!mc_all_on) {
diff --git a/drivers/infiniband/hw/qib/qib.h b/drivers/infiniband/hw/qib/qib.h
index 73225eee3cc..769a1d9da4b 100644
--- a/drivers/infiniband/hw/qib/qib.h
+++ b/drivers/infiniband/hw/qib/qib.h
@@ -653,7 +653,7 @@ struct diag_observer_list_elt;
 
 /* device data struct now contains only "general per-device" info.
  * fields related to a physical IB port are in a qib_pportdata struct,
- * described above) while fields only used by a particualr chip-type are in
+ * described above) while fields only used by a particular chip-type are in
  * a qib_chipdata struct, whose contents are opaque to this file.
  */
 struct qib_devdata {
diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c
index 75bfad16c11..406fca50d03 100644
--- a/drivers/infiniband/hw/qib/qib_file_ops.c
+++ b/drivers/infiniband/hw/qib/qib_file_ops.c
@@ -1539,7 +1539,7 @@ done_chk_sdma:
 
                 /*
                  * If process has NOT already set it's affinity, select and
-                 * reserve a processor for it, as a rendevous for all
+                 * reserve a processor for it, as a rendezvous for all
                  * users of the driver.  If they don't actually later
                  * set affinity to this cpu, or set it to some other cpu,
                  * it just means that sooner or later we don't recommend
@@ -1657,7 +1657,7 @@ static int qib_do_user_init(struct file *fp,
          * 0 to 1.  So for those chips, we turn it off and then back on.
          * This will (very briefly) affect any other open ctxts, but the
          * duration is very short, and therefore isn't an issue.  We
-         * explictly set the in-memory tail copy to 0 beforehand, so we
+         * explicitly set the in-memory tail copy to 0 beforehand, so we
          * don't have to wait to be sure the DMA update has happened
          * (chip resets head/tail to 0 on transition to enable).
          */
diff --git a/drivers/infiniband/hw/qib/qib_iba6120.c b/drivers/infiniband/hw/qib/qib_iba6120.c
index 774dea897e9..7de4b7ebffc 100644
--- a/drivers/infiniband/hw/qib/qib_iba6120.c
+++ b/drivers/infiniband/hw/qib/qib_iba6120.c
@@ -1799,7 +1799,7 @@ static int qib_6120_setup_reset(struct qib_devdata *dd)
         /*
          * Keep chip from being accessed until we are ready.  Use
          * writeq() directly, to allow the write even though QIB_PRESENT
-         * isnt' set.
+         * isn't' set.
          */
         dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
         dd->int_counter = 0; /* so we check interrupts work again */
@@ -2171,7 +2171,7 @@ static void rcvctrl_6120_mod(struct qib_pportdata *ppd, unsigned int op,
                  * Init the context registers also; if we were
                  * disabled, tail and head should both be zero
                  * already from the enable, but since we don't
-                 * know, we have to do it explictly.
+                 * know, we have to do it explicitly.
                  */
                 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
                 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
diff --git a/drivers/infiniband/hw/qib/qib_iba7220.c b/drivers/infiniband/hw/qib/qib_iba7220.c
index de799f17cb9..74fe0360bec 100644
--- a/drivers/infiniband/hw/qib/qib_iba7220.c
+++ b/drivers/infiniband/hw/qib/qib_iba7220.c
@@ -2111,7 +2111,7 @@ static int qib_setup_7220_reset(struct qib_devdata *dd)
         /*
          * Keep chip from being accessed until we are ready.  Use
          * writeq() directly, to allow the write even though QIB_PRESENT
-         * isnt' set.
+         * isn't' set.
          */
         dd->flags &= ~(QIB_INITTED | QIB_PRESENT);
         dd->int_counter = 0; /* so we check interrupts work again */
@@ -2479,7 +2479,7 @@ static int qib_7220_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
                  * we command the link down.  As with width, only write the
                  * actual register if the link is currently down, otherwise
                  * takes effect on next link change.  Since setting is being
-                 * explictly requested (via MAD or sysfs), clear autoneg
+                 * explicitly requested (via MAD or sysfs), clear autoneg
                  * failure status if speed autoneg is enabled.
                  */
                 ppd->link_speed_enabled = val;
@@ -2778,7 +2778,7 @@ static void rcvctrl_7220_mod(struct qib_pportdata *ppd, unsigned int op,
                  * Init the context registers also; if we were
                  * disabled, tail and head should both be zero
                  * already from the enable, but since we don't
-                 * know, we have to do it explictly.
+                 * know, we have to do it explicitly.
                  */
                 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
                 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c
index 4a2d21e15a7..55de3cf3441 100644
--- a/drivers/infiniband/hw/qib/qib_iba7322.c
+++ b/drivers/infiniband/hw/qib/qib_iba7322.c
@@ -3299,7 +3299,7 @@ static int qib_do_7322_reset(struct qib_devdata *dd)
         /*
          * Keep chip from being accessed until we are ready.  Use
          * writeq() directly, to allow the write even though QIB_PRESENT
-         * isnt' set.
+         * isn't' set.
          */
         dd->flags &= ~(QIB_INITTED | QIB_PRESENT | QIB_BADINTR);
         dd->flags |= QIB_DOING_RESET;
@@ -3727,7 +3727,7 @@ static int qib_7322_set_ib_cfg(struct qib_pportdata *ppd, int which, u32 val)
                 /*
                  * As with width, only write the actual register if the
                  * link is currently down, otherwise takes effect on next
-                 * link change.  Since setting is being explictly requested
+                 * link change.  Since setting is being explicitly requested
                  * (via MAD or sysfs), clear autoneg failure status if speed
                  * autoneg is enabled.
                  */
@@ -4163,7 +4163,7 @@ static void rcvctrl_7322_mod(struct qib_pportdata *ppd, unsigned int op,
                  * Init the context registers also; if we were
                  * disabled, tail and head should both be zero
                  * already from the enable, but since we don't
-                 * know, we have to do it explictly.
+                 * know, we have to do it explicitly.
                  */
                 val = qib_read_ureg32(dd, ur_rcvegrindextail, ctxt);
                 qib_write_ureg(dd, ur_rcvegrindexhead, val, ctxt);
@@ -7483,7 +7483,7 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd)
         /*       Baseline Wander Correction Gain [13:4-0] (leave as default) */
         /*       Baseline Wander Correction Gain [3:7-5] (leave as default) */
         /*       Data Rate Select [5:7-6] (leave as default) */
-        /*       RX Parralel Word Width [3:10-8] (leave as default) */
+        /*       RX Parallel Word Width [3:10-8] (leave as default) */
 
         /* RX REST */
         /*       Single- or Multi-channel reset */
diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
index ffefb78b894..a01f3fce8eb 100644
--- a/drivers/infiniband/hw/qib/qib_init.c
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -346,7 +346,7 @@ done:
  * @dd: the qlogic_ib device
  *
  * sanity check at least some of the values after reset, and
- * ensure no receive or transmit (explictly, in case reset
+ * ensure no receive or transmit (explicitly, in case reset
  * failed
  */
 static int init_after_reset(struct qib_devdata *dd)
diff --git a/drivers/infiniband/hw/qib/qib_mad.h b/drivers/infiniband/hw/qib/qib_mad.h
index 147aff9117d..7840ab593bc 100644
--- a/drivers/infiniband/hw/qib/qib_mad.h
+++ b/drivers/infiniband/hw/qib/qib_mad.h
@@ -73,7 +73,7 @@ struct ib_mad_notice_attr {
 
                 struct {
                         __be16  reserved;
-                        __be16  lid;            /* LID where change occured */
+                        __be16  lid;            /* LID where change occurred */
                         u8      reserved2;
                         u8      local_changes;  /* low bit - local changes */
                         __be32  new_cap_mask;   /* new capability mask */
diff --git a/drivers/infiniband/hw/qib/qib_twsi.c b/drivers/infiniband/hw/qib/qib_twsi.c
index 6f31ca5039d..ddde72e11ed 100644
--- a/drivers/infiniband/hw/qib/qib_twsi.c
+++ b/drivers/infiniband/hw/qib/qib_twsi.c
@@ -41,7 +41,7 @@
  * QLogic_IB "Two Wire Serial Interface" driver.
  * Originally written for a not-quite-i2c serial eeprom, which is
  * still used on some supported boards. Later boards have added a
- * variety of other uses, most board-specific, so teh bit-boffing
+ * variety of other uses, most board-specific, so the bit-boffing
  * part has been split off to this file, while the other parts
  * have been moved to chip-specific files.
  *
diff --git a/drivers/infiniband/hw/qib/qib_ud.c b/drivers/infiniband/hw/qib/qib_ud.c
index 4a51fd1e9cb..828609fa4d2 100644
--- a/drivers/infiniband/hw/qib/qib_ud.c
+++ b/drivers/infiniband/hw/qib/qib_ud.c
@@ -116,7 +116,7 @@ static void qib_ud_loopback(struct qib_qp *sqp, struct qib_swqe *swqe)
         }
 
         /*
-         * A GRH is expected to preceed the data even if not
+         * A GRH is expected to precede the data even if not
          * present on the wire.
          */
         length = swqe->length;
@@ -520,7 +520,7 @@ void qib_ud_rcv(struct qib_ibport *ibp, struct qib_ib_header *hdr,
                 goto drop;
 
         /*
-         * A GRH is expected to preceed the data even if not
+         * A GRH is expected to precede the data even if not
          * present on the wire.
          */
         wc.byte_len = tlen + sizeof(struct ib_grh);
diff --git a/drivers/infiniband/hw/qib/qib_user_sdma.c b/drivers/infiniband/hw/qib/qib_user_sdma.c
index 66208bcd7c1..82442085cbe 100644
--- a/drivers/infiniband/hw/qib/qib_user_sdma.c
+++ b/drivers/infiniband/hw/qib/qib_user_sdma.c
@@ -239,7 +239,7 @@ static int qib_user_sdma_num_pages(const struct iovec *iov)
 }
 
 /*
- * Truncate length to page boundry.
+ * Truncate length to page boundary.
  */
 static int qib_user_sdma_page_length(unsigned long addr, unsigned long len)
 {
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h
index f1df01567bb..2f02ab0ccc1 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.h
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.h
@@ -91,7 +91,7 @@
 #define SIZE_4K (1UL << SHIFT_4K)
 #define MASK_4K (~(SIZE_4K-1))
 
-                                        /* support upto 512KB in one RDMA */
+                                        /* support up to 512KB in one RDMA */
 #define ISCSI_ISER_SG_TABLESIZE         (0x80000 >> SHIFT_4K)
 #define ISER_DEF_CMD_PER_LUN            128
 
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 3182c9cd1b0..5688b5c88f2 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -758,7 +758,7 @@ static void joydev_remove_chrdev(struct joydev *joydev)
 }
 
 /*
- * Mark device non-existant. This disables writes, ioctls and
+ * Mark device non-existent. This disables writes, ioctls and
  * prevents new users from opening the device. Already posted
  * blocking reads will stay, however new ones will fail.
  */
@@ -777,7 +777,7 @@ static void joydev_cleanup(struct joydev *joydev)
         joydev_hangup(joydev);
         joydev_remove_chrdev(joydev);
 
-        /* joydev is marked dead so noone else accesses joydev->open */
+        /* joydev is marked dead so no one else accesses joydev->open */
         if (joydev->open)
                 input_close_device(handle);
 }
diff --git a/drivers/input/joystick/a3d.c b/drivers/input/joystick/a3d.c
index d259b41354b..1639ab2b94b 100644
--- a/drivers/input/joystick/a3d.c
+++ b/drivers/input/joystick/a3d.c
@@ -3,7 +3,7 @@
  */
 
 /*
- * FP-Gaming Assasin 3D joystick driver for Linux
+ * FP-Gaming Assassin 3D joystick driver for Linux
  */
 
 /*
@@ -34,7 +34,7 @@
 #include <linux/input.h>
 #include <linux/jiffies.h>
 
-#define DRIVER_DESC     "FP-Gaming Assasin 3D joystick driver"
+#define DRIVER_DESC     "FP-Gaming Assassin 3D joystick driver"
 
 MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/input/keyboard/davinci_keyscan.c b/drivers/input/keyboard/davinci_keyscan.c
index a91ee941b5c..cd89d17162a 100644
--- a/drivers/input/keyboard/davinci_keyscan.c
+++ b/drivers/input/keyboard/davinci_keyscan.c
@@ -5,7 +5,7 @@
  *
  * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
  *
- * Intial Code: Sandeep Paulraj <s-paulraj@ti.com>
+ * Initial Code: Sandeep Paulraj <s-paulraj@ti.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
diff --git a/drivers/input/misc/adxl34x.c b/drivers/input/misc/adxl34x.c
index de5900d5078..144ddbdeb9b 100644
--- a/drivers/input/misc/adxl34x.c
+++ b/drivers/input/misc/adxl34x.c
@@ -716,7 +716,7 @@ struct adxl34x *adxl34x_probe(struct device *dev, int irq,
         pdata = dev->platform_data;
         if (!pdata) {
                 dev_dbg(dev,
-                        "No platfrom data: Using default initialization\n");
+                        "No platform data: Using default initialization\n");
                 pdata = &adxl34x_default_init;
         }
 
diff --git a/drivers/input/misc/keyspan_remote.c b/drivers/input/misc/keyspan_remote.c
index a93c525475c..fc62256c963 100644
--- a/drivers/input/misc/keyspan_remote.c
+++ b/drivers/input/misc/keyspan_remote.c
@@ -312,7 +312,7 @@ static void keyspan_check_data(struct usb_keyspan *remote)
                         remote->data.tester = remote->data.tester >> 5;
                         remote->data.bits_left -= 5;
                 } else {
-                        err("Bad message recieved, no stop bit found.\n");
+                        err("Bad message received, no stop bit found.\n");
                 }
 
                 dev_dbg(&remote->udev->dev,
diff --git a/drivers/input/misc/wistron_btns.c b/drivers/input/misc/wistron_btns.c
index 12501de0c5c..52b41934898 100644
--- a/drivers/input/misc/wistron_btns.c
+++ b/drivers/input/misc/wistron_btns.c
@@ -274,7 +274,7 @@ static struct key_entry keymap_fs_amilo_pro_v3505[] __initdata = {
         { KE_BLUETOOTH, 0x30 },                      /* Fn+F10 */
         { KE_KEY,       0x31, {KEY_MAIL} },          /* mail button */
         { KE_KEY,       0x36, {KEY_WWW} },           /* www button */
-        { KE_WIFI,      0x78 },                      /* satelite dish button */
+        { KE_WIFI,      0x78 },                      /* satellite dish button */
         { KE_END,       0 }
 };
 
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 3aead91bacc..3126983c004 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -639,7 +639,7 @@ exit:
  * device, resulting in trackpad malfunction under certain
  * circumstances. To get around this problem, there is at least one
  * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to
- * recieve a reset_resume request rather than the normal resume.
+ * receive a reset_resume request rather than the normal resume.
  * Since the implementation of reset_resume is equal to mode switch
  * plus start_traffic, it seems easier to always do the switch when
  * starting traffic on the device.
diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c
index f6aa26d305e..cba3c84d2f2 100644
--- a/drivers/input/mouse/synaptics_i2c.c
+++ b/drivers/input/mouse/synaptics_i2c.c
@@ -462,7 +462,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work)
          * While interrupt driven, there is no real need to poll the device.
          * But touchpads are very sensitive, so there could be errors
          * related to physical environment and the attention line isn't
-         * neccesarily asserted. In such case we can lose the touchpad.
+         * necessarily asserted. In such case we can lose the touchpad.
          * We poll the device once in THREAD_IRQ_SLEEP_SECS and
          * if error is detected, we try to reset and reconfigure the touchpad.
          */
diff --git a/drivers/input/mouse/vsxxxaa.c b/drivers/input/mouse/vsxxxaa.c
index bf2c0c80d6c..eb9a3cfbeef 100644
--- a/drivers/input/mouse/vsxxxaa.c
+++ b/drivers/input/mouse/vsxxxaa.c
@@ -334,7 +334,7 @@ static void vsxxxaa_handle_POR_packet(struct vsxxxaa *mouse)
          * M: manufacturer location code
          * R: revision code
          * E: Error code. If it's in the range of 0x00..0x1f, only some
-         *    minor problem occured. Errors >= 0x20 are considered bad
+         *    minor problem occurred. Errors >= 0x20 are considered bad
          *    and the device may not work properly...
          * D: <0010> == mouse, <0100> == tablet
          */
diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c
index 8c0b51c3142..42206205e4f 100644
--- a/drivers/input/serio/hp_sdc.c
+++ b/drivers/input/serio/hp_sdc.c
@@ -955,7 +955,7 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d)
         INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
 
         ret = hp_sdc_init();
-        /* after successfull initialization give SDC some time to settle
+        /* after successful initialization give SDC some time to settle
          * and then load the hp_sdc_mlc upper layer driver */
         if (!ret)
                 schedule_delayed_work(&moduleloader_work,
diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c
index 7540bafc95c..80baa53da5b 100644
--- a/drivers/input/serio/xilinx_ps2.c
+++ b/drivers/input/serio/xilinx_ps2.c
@@ -225,7 +225,7 @@ static void sxps2_close(struct serio *pserio)
 /**
  * xps2_of_probe - probe method for the PS/2 device.
  * @of_dev:     pointer to OF device structure
- * @match:      pointer to the stucture used for matching a device
+ * @match:      pointer to the structure used for matching a device
  *
  * This function probes the PS/2 device in the device tree.
  * It initializes the driver data structure and the hardware.
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
index c0307b22d86..66c96bfc552 100644
--- a/drivers/input/touchscreen/intel-mid-touch.c
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -542,7 +542,7 @@ static int __devinit mrstouch_adc_init(struct mrstouch_dev *tsdev)
          * ADC power on, start, enable PENDET and set loop delay
          * ADC loop delay is set to 4.5 ms approximately
          * Loop delay more than this results in jitter in adc readings
-         * Setting loop delay to 0 (continous loop) in MAXIM stops PENDET
+         * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET
          * interrupt generation sometimes.
          */
 
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index 028a5363eea..3b5b5df04dd 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -6,7 +6,7 @@
  *  Copyright:  MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
index 6b5be742c27..98e61175d3f 100644
--- a/drivers/input/touchscreen/wm9705.c
+++ b/drivers/input/touchscreen/wm9705.c
@@ -306,7 +306,7 @@ static int wm9705_acc_enable(struct wm97xx *wm, int enable)
         dig2 = wm->dig[2];
 
         if (enable) {
-                /* continous mode */
+                /* continuous mode */
                 if (wm->mach_ops->acc_startup &&
                     (ret = wm->mach_ops->acc_startup(wm)) < 0)
                         return ret;
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
index 7490b05c356..2bc2fb80100 100644
--- a/drivers/input/touchscreen/wm9712.c
+++ b/drivers/input/touchscreen/wm9712.c
@@ -419,7 +419,7 @@ static int wm9712_acc_enable(struct wm97xx *wm, int enable)
         dig2 = wm->dig[2];
 
         if (enable) {
-                /* continous mode */
+                /* continuous mode */
                 if (wm->mach_ops->acc_startup) {
                         ret = wm->mach_ops->acc_startup(wm);
                         if (ret < 0)
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 238b5132712..73ec99568f1 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -431,7 +431,7 @@ static int wm9713_acc_enable(struct wm97xx *wm, int enable)
         dig3 = wm->dig[2];
 
         if (enable) {
-                /* continous mode */
+                /* continuous mode */
                 if (wm->mach_ops->acc_startup &&
                         (ret = wm->mach_ops->acc_startup(wm)) < 0)
                         return ret;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 6b75c9f660a..5dbe73af2f8 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -335,7 +335,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
          */
         if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
                 if (wm->pen_is_down && !pen_was_down) {
-                        /* Data is not availiable immediately on pen down */
+                        /* Data is not available immediately on pen down */
                         queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
                 }
 
@@ -354,7 +354,7 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
  * Codec PENDOWN irq handler
  *
  * We have to disable the codec interrupt in the handler because it
- * can take upto 1ms to clear the interrupt source. We schedule a task
+ * can take up to 1ms to clear the interrupt source. We schedule a task
  * in a work queue to do the actual interaction with the chip.  The
  * interrupt is then enabled again in the slow handler when the source
  * has been cleared.
diff --git a/drivers/isdn/hardware/eicon/divacapi.h b/drivers/isdn/hardware/eicon/divacapi.h
index 9f5b68037a2..e330da0c5fc 100644
--- a/drivers/isdn/hardware/eicon/divacapi.h
+++ b/drivers/isdn/hardware/eicon/divacapi.h
@@ -673,7 +673,7 @@ struct async_s {
 
 
 /*------------------------------------------------------------------*/
-/* auxilliary states for supplementary services                     */
+/* auxiliary states for supplementary services                     */
 /*------------------------------------------------------------------*/
 
 #define IDLE                0
diff --git a/drivers/isdn/hardware/eicon/io.h b/drivers/isdn/hardware/eicon/io.h
index 0c6c650d76b..a6f17559636 100644
--- a/drivers/isdn/hardware/eicon/io.h
+++ b/drivers/isdn/hardware/eicon/io.h
@@ -60,7 +60,7 @@ typedef struct _diva_xdi_capi_cfg {
   -------------------------------------------------------------------------- */
 struct _ISDN_ADAPTER {
  void             (* DIRequest)(PISDN_ADAPTER, ENTITY *) ;
- int                 State ; /* from NT4 1.srv, a good idea, but  a poor achievment */
+ int                 State ; /* from NT4 1.srv, a good idea, but  a poor achievement */
  int                 Initialized ;
  int         RegisteredWithDidd ;
  int                 Unavailable ;  /* callback function possible? */
diff --git a/drivers/isdn/hardware/eicon/message.c b/drivers/isdn/hardware/eicon/message.c
index 341ef17c22a..8c5c563c4f1 100644
--- a/drivers/isdn/hardware/eicon/message.c
+++ b/drivers/isdn/hardware/eicon/message.c
@@ -2639,7 +2639,7 @@ static byte connect_b3_req(dword Id, word Number, DIVA_CAPI_ADAPTER *a,
     }
     else
     {
-      /* local reply if assign unsuccessfull
+      /* local reply if assign unsuccessful
          or B3 protocol allows only one layer 3 connection
            and already connected
              or B2 protocol not any LAPD
@@ -8189,7 +8189,7 @@ static word add_b23(PLCI *plci, API_PARSE *bp)
       dlc[ 0] = 15;
       if(b2_config->length >= 8) { /* PIAFS control abilities */
         dlc[ 7] = 10; 
-        dlc[16] = 2; /* Length of PIAFS extention */
+        dlc[16] = 2; /* Length of PIAFS extension */
         dlc[17] = PIAFS_UDATA_ABILITIES; /* control (UDATA) ability */
         dlc[18] = b2_config_parms[4].info[0]; /* value */
         dlc[ 0] = 18;
diff --git a/drivers/isdn/hardware/eicon/pc.h b/drivers/isdn/hardware/eicon/pc.h
index 1c6945768a3..bf6b0181240 100644
--- a/drivers/isdn/hardware/eicon/pc.h
+++ b/drivers/isdn/hardware/eicon/pc.h
@@ -701,7 +701,7 @@ Byte | 8 7 6 5 4 3 2 1
 #define PROTCAP_FREE12    0x1000  /* not used                            */
 #define PROTCAP_FREE13    0x2000  /* not used                            */
 #define PROTCAP_FREE14    0x4000  /* not used                            */
-#define PROTCAP_EXTENSION 0x8000  /* used for future extentions          */
+#define PROTCAP_EXTENSION 0x8000  /* used for future extensions          */
 /* -----------------------------------------------------------* */
 /* Onhook data transmission ETS30065901 */
 /* Message Type */
diff --git a/drivers/isdn/hardware/eicon/um_idi.c b/drivers/isdn/hardware/eicon/um_idi.c
index 6563db998d0..ac0bdd1f23f 100644
--- a/drivers/isdn/hardware/eicon/um_idi.c
+++ b/drivers/isdn/hardware/eicon/um_idi.c
@@ -363,7 +363,7 @@ int diva_um_idi_read(void *entity,
 
                 if ((ret = (*cp_fn) (os_handle, dst, data, length)) >= 0) {
                         /*
-                           Acknowledge only if read was successfull
+                           Acknowledge only if read was successful
                          */
                         diva_data_q_ack_segment4read(q);
                 }
diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c
index 4e3780d78ac..f6f3c87cc7c 100644
--- a/drivers/isdn/hardware/mISDN/hfcmulti.c
+++ b/drivers/isdn/hardware/mISDN/hfcmulti.c
@@ -118,7 +118,7 @@
  *      -> See hfc_multi.h for HFC_IO_MODE_* values
  *      By default, the IO mode is pci memory IO (MEMIO).
  *      Some cards require specific IO mode, so it cannot be changed.
- *      It may be usefull to set IO mode to register io (REGIO) to solve
+ *      It may be useful to set IO mode to register io (REGIO) to solve
  *      PCI bridge problems.
  *      If unsure, don't give this parameter.
  *
@@ -903,7 +903,7 @@ vpm_echocan_off(struct hfc_multi *hc, int ch)
 /*
  * Speech Design resync feature
  * NOTE: This is called sometimes outside interrupt handler.
- * We must lock irqsave, so no other interrupt (other card) will occurr!
+ * We must lock irqsave, so no other interrupt (other card) will occur!
  * Also multiple interrupts may nest, so must lock each access (lists, card)!
  */
 static inline void
diff --git a/drivers/isdn/hardware/mISDN/hfcpci.c b/drivers/isdn/hardware/mISDN/hfcpci.c
index 15d323b8be6..4343abac0b1 100644
--- a/drivers/isdn/hardware/mISDN/hfcpci.c
+++ b/drivers/isdn/hardware/mISDN/hfcpci.c
@@ -272,7 +272,7 @@ reset_hfcpci(struct hfc_pci *hc)
          * D- and monitor/CI channel are not enabled
          * STIO1 is used as output for data, B1+B2 from ST->IOM+HFC
          * STIO2 is used as data input, B1+B2 from IOM->ST
-         * ST B-channel send disabled -> continous 1s
+         * ST B-channel send disabled -> continuous 1s
          * The IOM slots are always enabled
          */
         if (test_bit(HFC_CFG_PCM, &hc->cfg)) {
diff --git a/drivers/isdn/hisax/hfc_pci.c b/drivers/isdn/hisax/hfc_pci.c
index 3147020d188..0cb0546ead8 100644
--- a/drivers/isdn/hisax/hfc_pci.c
+++ b/drivers/isdn/hisax/hfc_pci.c
@@ -146,7 +146,7 @@ reset_hfcpci(struct IsdnCardState *cs)
         /* D- and monitor/CI channel are not enabled */
         /* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
         /* STIO2 is used as data input, B1+B2 from IOM->ST */
-        /* ST B-channel send disabled -> continous 1s */
+        /* ST B-channel send disabled -> continuous 1s */
         /* The IOM slots are always enabled */
         cs->hw.hfcpci.conn = 0x36;      /* set data flow directions */
         Write_hfc(cs, HFCPCI_CONNECT, cs->hw.hfcpci.conn);
diff --git a/drivers/isdn/hisax/hfc_sx.c b/drivers/isdn/hisax/hfc_sx.c
index 1235b7131ae..156d7c63d94 100644
--- a/drivers/isdn/hisax/hfc_sx.c
+++ b/drivers/isdn/hisax/hfc_sx.c
@@ -399,7 +399,7 @@ reset_hfcsx(struct IsdnCardState *cs)
         /* D- and monitor/CI channel are not enabled */
         /* STIO1 is used as output for data, B1+B2 from ST->IOM+HFC */
         /* STIO2 is used as data input, B1+B2 from IOM->ST */
-        /* ST B-channel send disabled -> continous 1s */
+        /* ST B-channel send disabled -> continuous 1s */
         /* The IOM slots are always enabled */
         cs->hw.hfcsx.conn = 0x36;       /* set data flow directions */
         Write_hfc(cs, HFCSX_CONNECT, cs->hw.hfcsx.conn);
diff --git a/drivers/isdn/hisax/hfc_usb.h b/drivers/isdn/hisax/hfc_usb.h
index e79f56568d3..2f581c0b469 100644
--- a/drivers/isdn/hisax/hfc_usb.h
+++ b/drivers/isdn/hisax/hfc_usb.h
@@ -126,7 +126,7 @@ static struct hfcusb_symbolic_list urb_errlist[] = {
 
 
 /*
- * device dependant information to support different
+ * device dependent information to support different
  * ISDN Ta's using the HFC-S USB chip
  */
 
diff --git a/drivers/isdn/hisax/l3dss1.c b/drivers/isdn/hisax/l3dss1.c
index cc6ee2d3988..8e2fd02ecce 100644
--- a/drivers/isdn/hisax/l3dss1.c
+++ b/drivers/isdn/hisax/l3dss1.c
@@ -1595,7 +1595,7 @@ l3dss1_setup(struct l3_process *pc, u_char pr, void *arg)
          * Bearer Capabilities
          */
         p = skb->data;
-        /* only the first occurence 'll be detected ! */
+        /* only the first occurrence 'll be detected ! */
         if ((p = findie(p, skb->len, 0x04, 0))) {
                 if ((p[1] < 2) || (p[1] > 11))
                         err = 1;
@@ -2161,7 +2161,7 @@ static void l3dss1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3dss1_cmd_global(struct PStack *st, isdn_ctrl *ic)
diff --git a/drivers/isdn/hisax/l3ni1.c b/drivers/isdn/hisax/l3ni1.c
index f9584491fe8..7b229c0ce11 100644
--- a/drivers/isdn/hisax/l3ni1.c
+++ b/drivers/isdn/hisax/l3ni1.c
@@ -1449,7 +1449,7 @@ l3ni1_setup(struct l3_process *pc, u_char pr, void *arg)
          * Bearer Capabilities
          */
         p = skb->data;
-        /* only the first occurence 'll be detected ! */
+        /* only the first occurrence 'll be detected ! */
         if ((p = findie(p, skb->len, 0x04, 0))) {
                 if ((p[1] < 2) || (p[1] > 11))
                         err = 1;
@@ -2017,7 +2017,7 @@ static void l3ni1_redir_req_early(struct l3_process *pc, u_char pr, void *arg)
 
 /***********************************************/
 /* handle special commands for this protocol.  */
-/* Examples are call independant services like */
+/* Examples are call independent services like */
 /* remote operations with dummy  callref.      */
 /***********************************************/
 static int l3ni1_cmd_global(struct PStack *st, isdn_ctrl *ic)
diff --git a/drivers/isdn/hisax/nj_s.c b/drivers/isdn/hisax/nj_s.c
index 2344e7b3344..a1b89524b50 100644
--- a/drivers/isdn/hisax/nj_s.c
+++ b/drivers/isdn/hisax/nj_s.c
@@ -167,7 +167,7 @@ static int __devinit njs_pci_probe(struct pci_dev *dev_netjet,
                 return(0);
         }
         /* the TJ300 and TJ320 must be detected, the IRQ handling is different
-         * unfortunatly the chips use the same device ID, but the TJ320 has
+         * unfortunately the chips use the same device ID, but the TJ320 has
          * the bit20 in status PCI cfg register set
          */
         pci_read_config_dword(dev_netjet, 0x04, &cfg);
diff --git a/drivers/isdn/hisax/st5481_b.c b/drivers/isdn/hisax/st5481_b.c
index e56e5af889b..ed4bc564dc6 100644
--- a/drivers/isdn/hisax/st5481_b.c
+++ b/drivers/isdn/hisax/st5481_b.c
@@ -124,7 +124,7 @@ static void usb_b_out(struct st5481_bcs *bcs,int buf_nr)
 }
 
 /*
- * Start transfering (flags or data) on the B channel, since
+ * Start transferring (flags or data) on the B channel, since
  * FIFO counters has been set to a non-zero value.
  */
 static void st5481B_start_xfer(void *context)
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index 10d41c5d73e..159e8fa00fd 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -470,7 +470,7 @@ void st5481_release_isocpipes(struct urb* urb[2])
 
 /*
  * Decode frames received on the B/D channel.
- * Note that this function will be called continously
+ * Note that this function will be called continuously
  * with 64Kbit/s / 16Kbit/s of data and hence it will be 
  * called 50 times per second with 20 ISOC descriptors. 
  * Called at interrupt.
diff --git a/drivers/isdn/hisax/teles_cs.c b/drivers/isdn/hisax/teles_cs.c
index 282a4467ef1..aa25e183bf7 100644
--- a/drivers/isdn/hisax/teles_cs.c
+++ b/drivers/isdn/hisax/teles_cs.c
@@ -9,7 +9,7 @@
     Also inspired by ELSA PCMCIA driver 
     by Klaus Lichtenwalder <Lichtenwalder@ACM.org>
     
-    Extentions to new hisax_pcmcia by Karsten Keil
+    Extensions to new hisax_pcmcia by Karsten Keil
 
     minor changes to be compatible with kernel 2.4.x
     by Jan.Schubert@GMX.li
diff --git a/drivers/isdn/hysdn/hysdn_sched.c b/drivers/isdn/hysdn/hysdn_sched.c
index 81db4a190d4..3674d30d6a0 100644
--- a/drivers/isdn/hysdn/hysdn_sched.c
+++ b/drivers/isdn/hysdn/hysdn_sched.c
@@ -143,7 +143,7 @@ hysdn_sched_tx(hysdn_card *card, unsigned char *buf,
 /* send one config line to the card and return 0 if successful, otherwise a */
 /* negative error code.                                                      */
 /* The function works with timeouts perhaps not giving the greatest speed    */
-/* sending the line, but this should be meaningless beacuse only some lines  */
+/* sending the line, but this should be meaningless because only some lines  */
 /* are to be sent and this happens very seldom.                              */
 /*****************************************************************************/
 int
diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c
index afeede7ee29..2a7d17c1948 100644
--- a/drivers/isdn/i4l/isdn_net.c
+++ b/drivers/isdn/i4l/isdn_net.c
@@ -1530,7 +1530,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
                 printk (KERN_WARNING
                                 "UPDOWN: Line protocol on Interface %s,"
                                 " changed state to down\n", lp->netdev->dev->name);
-                /* should stop routing higher-level data accross */
+                /* should stop routing higher-level data across */
         } else if ((!lp->cisco_line_state) &&
                 (myseq_diff >= 0) && (myseq_diff <= 2)) {
                 /* line down -> up */
@@ -1538,7 +1538,7 @@ isdn_net_ciscohdlck_slarp_send_keepalive(unsigned long data)
                 printk (KERN_WARNING
                                 "UPDOWN: Line protocol on Interface %s,"
                                 " changed state to up\n", lp->netdev->dev->name);
-                /* restart routing higher-level data accross */
+                /* restart routing higher-level data across */
         }
 
         if (lp->cisco_debserint)
diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c
index 9e8162c80bb..1b002b0002a 100644
--- a/drivers/isdn/i4l/isdn_ppp.c
+++ b/drivers/isdn/i4l/isdn_ppp.c
@@ -1514,7 +1514,7 @@ int isdn_ppp_autodial_filter(struct sk_buff *skb, isdn_net_local *lp)
 #define MP_LONGSEQ_MAXBIT       ((MP_LONGSEQ_MASK+1)>>1)
 #define MP_SHORTSEQ_MAXBIT      ((MP_SHORTSEQ_MASK+1)>>1)
 
-/* sequence-wrap safe comparisions (for long sequence)*/ 
+/* sequence-wrap safe comparisons (for long sequence)*/
 #define MP_LT(a,b)      ((a-b)&MP_LONGSEQ_MAXBIT)
 #define MP_LE(a,b)      !((b-a)&MP_LONGSEQ_MAXBIT)
 #define MP_GT(a,b)      ((b-a)&MP_LONGSEQ_MAXBIT)
@@ -1746,7 +1746,7 @@ static void isdn_ppp_mp_receive(isdn_net_dev * net_dev, isdn_net_local * lp,
                  * then next fragment should be the start of new reassembly
                  * if sequence is contiguous, but we haven't reassembled yet,
                  * keep going.
-                 * if sequence is not contiguous, either clear everyting
+                 * if sequence is not contiguous, either clear everything
                  * below low watermark and set start to the next frag or
                  * clear start ptr.
                  */ 
diff --git a/drivers/isdn/i4l/isdn_tty.c b/drivers/isdn/i4l/isdn_tty.c
index 3d88f15aa21..607d846ae06 100644
--- a/drivers/isdn/i4l/isdn_tty.c
+++ b/drivers/isdn/i4l/isdn_tty.c
@@ -792,7 +792,7 @@ isdn_tty_suspend(char *id, modem_info * info, atemu * m)
 }
 
 /* isdn_tty_resume() tries to resume a suspended call
- * setup of the lower levels before that. unfortunatly here is no
+ * setup of the lower levels before that. unfortunately here is no
  * checking for compatibility of used protocols implemented by Q931
  * It does the same things like isdn_tty_dial, the last command
  * is different, may be we can merge it.
diff --git a/drivers/isdn/isdnloop/isdnloop.c b/drivers/isdn/isdnloop/isdnloop.c
index b8a1098b66e..d497db0a26d 100644
--- a/drivers/isdn/isdnloop/isdnloop.c
+++ b/drivers/isdn/isdnloop/isdnloop.c
@@ -954,7 +954,7 @@ isdnloop_parse_cmd(isdnloop_card * card)
 /*
  * Put command-strings into the of the 'card'. In reality, execute them
  * right in place by calling isdnloop_parse_cmd(). Also copy every
- * command to the read message ringbuffer, preceeding it with a '>'.
+ * command to the read message ringbuffer, preceding it with a '>'.
  * These mesagges can be read at /dev/isdnctrl.
  *
  * Parameter:
diff --git a/drivers/isdn/mISDN/dsp.h b/drivers/isdn/mISDN/dsp.h
index 18af86879c0..8549431430f 100644
--- a/drivers/isdn/mISDN/dsp.h
+++ b/drivers/isdn/mISDN/dsp.h
@@ -21,7 +21,7 @@
 /* options may be:
  *
  * bit 0 = use ulaw instead of alaw
- * bit 1 = enable hfc hardware accelleration for all channels
+ * bit 1 = enable hfc hardware acceleration for all channels
  *
  */
 #define DSP_OPT_ULAW            (1<<0)
diff --git a/drivers/isdn/mISDN/dsp_cmx.c b/drivers/isdn/mISDN/dsp_cmx.c
index 309bacf1fad..4d395dea32f 100644
--- a/drivers/isdn/mISDN/dsp_cmx.c
+++ b/drivers/isdn/mISDN/dsp_cmx.c
@@ -1513,7 +1513,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
         /* -> if echo is NOT enabled */
         if (!dsp->echo.software) {
                 /*
-                 * -> substract rx-data from conf-data,
+                 * -> subtract rx-data from conf-data,
                  * if tx-data is available, mix
                  */
                 while (r != rr && t != tt) {
@@ -1572,7 +1572,7 @@ dsp_cmx_send_member(struct dsp *dsp, int len, s32 *c, int members)
 send_packet:
         /*
          * send tx-data if enabled - don't filter,
-         * becuase we want what we send, not what we filtered
+         * because we want what we send, not what we filtered
          */
         if (dsp->tx_data) {
                 if (tx_data_only) {
diff --git a/drivers/isdn/mISDN/dsp_core.c b/drivers/isdn/mISDN/dsp_core.c
index 6f5b5486428..2877291a9ed 100644
--- a/drivers/isdn/mISDN/dsp_core.c
+++ b/drivers/isdn/mISDN/dsp_core.c
@@ -115,7 +115,7 @@
  *
  * The CMX has special functions for conferences with one, two and more
  * members. It will allow different types of data flow. Receive and transmit
- * data to/form upper layer may be swithed on/off individually without loosing
+ * data to/form upper layer may be swithed on/off individually without losing
  * features of CMX, Tones and DTMF.
  *
  * Echo Cancellation: Sometimes we like to cancel echo from the interface.
@@ -127,9 +127,9 @@
  *
  * If all used features can be realized in hardware, and if transmit and/or
  * receive data ist disabled, the card may not send/receive any data at all.
- * Not receiving is usefull if only announcements are played. Not sending is
- * usefull if an answering machine records audio. Not sending and receiving is
- * usefull during most states of the call. If supported by hardware, tones
+ * Not receiving is useful if only announcements are played. Not sending is
+ * useful if an answering machine records audio. Not sending and receiving is
+ * useful during most states of the call. If supported by hardware, tones
  * will be played without cpu load. Small PBXs and NT-Mode applications will
  * not need expensive hardware when processing calls.
  *
diff --git a/drivers/isdn/mISDN/dsp_dtmf.c b/drivers/isdn/mISDN/dsp_dtmf.c
index 9ae2d33b06f..5b484c3f4af 100644
--- a/drivers/isdn/mISDN/dsp_dtmf.c
+++ b/drivers/isdn/mISDN/dsp_dtmf.c
@@ -106,7 +106,7 @@ void dsp_dtmf_hardware(struct dsp *dsp)
  * tested it allot. it even works with very short tones (40ms). the only
  * disadvantage is, that it doesn't work good with different volumes of both
  * tones. this will happen, if accoustically coupled dialers are used.
- * it sometimes detects tones during speach, which is normal for decoders.
+ * it sometimes detects tones during speech, which is normal for decoders.
  * use sequences to given commands during calls.
  *
  * dtmf - points to a structure of the current dtmf state
@@ -244,7 +244,7 @@ coefficients:
                 if (result[i] < tresh) {
                         lowgroup = -1;
                         highgroup = -1;
-                        break;  /* noise inbetween */
+                        break;  /* noise in between */
                 }
                 /* good level found. This is allowed only one time per group */
                 if (i < NCOEFF/2) {
diff --git a/drivers/isdn/mISDN/dsp_tones.c b/drivers/isdn/mISDN/dsp_tones.c
index 7dbe54ed1de..4e4440e8bae 100644
--- a/drivers/isdn/mISDN/dsp_tones.c
+++ b/drivers/isdn/mISDN/dsp_tones.c
@@ -394,7 +394,7 @@ void dsp_tone_copy(struct dsp *dsp, u8 *data, int len)
         while (len) {
                 /* find sample to start with */
                 while (42) {
-                        /* warp arround */
+                        /* wrap around */
                         if (!pat->seq[index]) {
                                 count = 0;
                                 index = 0;
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index bd526f664a3..22f8ec8b924 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -179,7 +179,7 @@ NOTE: A value of 0 equals 256 bytes of data.
 - Time Base = Timestamp of first sample in frame
 The "Time Base" is used to rearange packets and to detect packet loss.
 The 16 bits are sent in network order (MSB first) and count 1/8000 th of a
-second. This causes a wrap arround each 8,192 seconds. There is no requirement
+second. This causes a wrap around each 8,192 seconds. There is no requirement
 for the initial "Time Base", but 0 should be used for the first packet.
 In case of HDLC data, this timestamp counts the packet or byte number.
 
@@ -205,7 +205,7 @@ On Demand:
 
 If the ondemand parameter is given, the remote IP is set to 0 on timeout.
 This will stop keepalive traffic to remote. If the remote is online again,
-traffic will continue to the remote address. This is usefull for road warriors.
+traffic will continue to the remote address. This is useful for road warriors.
 This feature only works with ID set, otherwhise it is highly unsecure.
 
 
@@ -590,7 +590,7 @@ multiframe:
                         return;
                 }
         } else
-                mlen = len-2; /* single frame, substract timebase */
+                mlen = len-2; /* single frame, subtract timebase */
 
         if (len < 2) {
                 printk(KERN_WARNING "%s: packet error - packet too short, time "
diff --git a/drivers/isdn/mISDN/layer2.c b/drivers/isdn/mISDN/layer2.c
index 4ae75053c9d..d0aeb44ee7c 100644
--- a/drivers/isdn/mISDN/layer2.c
+++ b/drivers/isdn/mISDN/layer2.c
@@ -1864,7 +1864,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
                 psapi >>= 2;
                 ptei >>= 1;
                 if (psapi != l2->sapi) {
-                        /* not our bussiness */
+                        /* not our business */
                         if (*debug & DEBUG_L2)
                                 printk(KERN_DEBUG "%s: sapi %d/%d mismatch\n",
                                         __func__, psapi, l2->sapi);
@@ -1872,7 +1872,7 @@ ph_data_indication(struct layer2 *l2, struct mISDNhead *hh, struct sk_buff *skb)
                         return 0;
                 }
                 if ((ptei != l2->tei) && (ptei != GROUP_TEI)) {
-                        /* not our bussiness */
+                        /* not our business */
                         if (*debug & DEBUG_L2)
                                 printk(KERN_DEBUG "%s: tei %d/%d mismatch\n",
                                         __func__, ptei, l2->tei);
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index afac338d502..5bf63af09dd 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -58,7 +58,7 @@ static struct i2c_driver pca9532_driver = {
         .id_table = pca9532_id,
 };
 
-/* We have two pwm/blinkers, but 16 possible leds to drive. Additionaly,
+/* We have two pwm/blinkers, but 16 possible leds to drive. Additionally,
  * the clever Thecus people are using one pwm to drive the beeper. So,
  * as a compromise we average one pwm to the values requested by all
  * leds that are not ON/OFF.
diff --git a/drivers/leds/leds-wm8350.c b/drivers/leds/leds-wm8350.c
index a0452327328..f14edd82cb0 100644
--- a/drivers/leds/leds-wm8350.c
+++ b/drivers/leds/leds-wm8350.c
@@ -215,13 +215,13 @@ static int wm8350_led_probe(struct platform_device *pdev)
 
         isink = regulator_get(&pdev->dev, "led_isink");
         if (IS_ERR(isink)) {
-                printk(KERN_ERR "%s: cant get ISINK\n", __func__);
+                printk(KERN_ERR "%s: can't get ISINK\n", __func__);
                 return PTR_ERR(isink);
         }
 
         dcdc = regulator_get(&pdev->dev, "led_vcc");
         if (IS_ERR(dcdc)) {
-                printk(KERN_ERR "%s: cant get DCDC\n", __func__);
+                printk(KERN_ERR "%s: can't get DCDC\n", __func__);
                 ret = PTR_ERR(dcdc);
                 goto err_isink;
         }
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 3c781cdddda..948c547b8e9 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -130,7 +130,7 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
         rcu_assign_pointer(lg->eventfds, new);
 
         /*
-         * We're not in a big hurry.  Wait until noone's looking at old
+         * We're not in a big hurry.  Wait until no one's looking at old
          * version, then free it.
          */
         synchronize_rcu();
diff --git a/drivers/macintosh/adbhid.c b/drivers/macintosh/adbhid.c
index 5396c67ba0a..09d72bb00d1 100644
--- a/drivers/macintosh/adbhid.c
+++ b/drivers/macintosh/adbhid.c
@@ -328,7 +328,7 @@ adbhid_input_keycode(int id, int scancode, int repeat)
         switch (keycode) {
         case ADB_KEY_CAPSLOCK:
                 if (!restore_capslock_events) {
-                        /* Generate down/up events for CapsLock everytime. */
+                        /* Generate down/up events for CapsLock every time. */
                         input_report_key(ahid->input, KEY_CAPSLOCK, 1);
                         input_sync(ahid->input);
                         input_report_key(ahid->input, KEY_CAPSLOCK, 0);
diff --git a/drivers/macintosh/macio-adb.c b/drivers/macintosh/macio-adb.c
index bd6da7a9c55..b6ef8f59076 100644
--- a/drivers/macintosh/macio-adb.c
+++ b/drivers/macintosh/macio-adb.c
@@ -147,7 +147,7 @@ static int macio_adb_reset_bus(void)
 
         /* Hrm... we may want to not lock interrupts for so
          * long ... oh well, who uses that chip anyway ? :)
-         * That function will be seldomly used during boot
+         * That function will be seldom used during boot
          * on rare machines, so...
          */
         spin_lock_irqsave(&macio_lock, flags);
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index 9e3e2c56659..02367308ff2 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -662,7 +662,7 @@ static void thermostat_create_files(void)
                 err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
         if (err)
                 printk(KERN_WARNING
-                        "Failed to create tempertaure attribute file(s).\n");
+                        "Failed to create temperature attribute file(s).\n");
 }
 
 static void thermostat_remove_files(void)
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index bca2af2e376..d25df48b437 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -91,7 +91,7 @@
  *
  *  Mar. 10, 2005 : 1.2
  *      - Add basic support for Xserve G5
- *      - Retreive pumps min/max from EEPROM image in device-tree (broken)
+ *      - Retrieve pumps min/max from EEPROM image in device-tree (broken)
  *      - Use min/max macros here or there
  *      - Latest darwin updated U3H min fan speed to 20% PWM
  *
@@ -375,7 +375,7 @@ static int read_smon_adc(struct cpu_pid_state *state, int chan)
                 rc = i2c_master_send(state->monitor, buf, 2);
                 if (rc <= 0)
                         goto error;
-                /* Wait for convertion */
+                /* Wait for conversion */
                 msleep(1);
                 /* Switch to data register */
                 buf[0] = 4;
@@ -1192,7 +1192,7 @@ static int init_cpu_state(struct cpu_pid_state *state, int index)
                 err |= device_create_file(&of_dev->dev, &dev_attr_cpu1_intake_fan_rpm);
         }
         if (err)
-                printk(KERN_WARNING "Failed to create some of the atribute"
+                printk(KERN_WARNING "Failed to create some of the attribute"
                         "files for CPU %d\n", index);
 
         return 0;
diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c
index d37819fd5ad..46c4e95f10d 100644
--- a/drivers/macintosh/therm_windtunnel.c
+++ b/drivers/macintosh/therm_windtunnel.c
@@ -45,7 +45,7 @@
 #include <asm/sections.h>
 #include <asm/macio.h>
 
-#define LOG_TEMP                0                       /* continously log temperature */
+#define LOG_TEMP                0                       /* continuously log temperature */
 
 static struct {
         volatile int            running;
diff --git a/drivers/md/bitmap.h b/drivers/md/bitmap.h
index 931a7a7c379..d0aeaf46d93 100644
--- a/drivers/md/bitmap.h
+++ b/drivers/md/bitmap.h
@@ -45,7 +45,7 @@
  *
  * The counter counts pending write requests, plus the on-disk bit.
  * When the counter is '1' and the resync bits are clear, the on-disk
- * bit can be cleared aswell, thus setting the counter to 0.
+ * bit can be cleared as well, thus setting the counter to 0.
  * When we set a bit, or in the counter (to start a write), if the fields is
  * 0, we first set the disk bit and set the counter to 1.
  *
diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c
index dad011aed0c..7771ed21218 100644
--- a/drivers/md/dm-region-hash.c
+++ b/drivers/md/dm-region-hash.c
@@ -419,7 +419,7 @@ void dm_rh_mark_nosync(struct dm_region_hash *rh, struct bio *bio)
         /*
          * Possible cases:
          *   1) DM_RH_DIRTY
-         *   2) DM_RH_NOSYNC: was dirty, other preceeding writes failed
+         *   2) DM_RH_NOSYNC: was dirty, other preceding writes failed
          *   3) DM_RH_RECOVERING: flushing pending writes
          * Either case, the region should have not been connected to list.
          */
diff --git a/drivers/md/faulty.c b/drivers/md/faulty.c
index 339fdc67075..23078dabb6d 100644
--- a/drivers/md/faulty.c
+++ b/drivers/md/faulty.c
@@ -30,7 +30,7 @@
  *
  * Different modes can be active at a time, but only
  * one can be set at array creation.  Others can be added later.
- * A mode can be one-shot or recurrent with the recurrance being
+ * A mode can be one-shot or recurrent with the recurrence being
  * once in every N requests.
  * The bottom 5 bits of the "layout" indicate the mode.  The
  * remainder indicate a period, or 0 for one-shot.
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 8b66e04c2ea..b12b3776c0c 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -6266,7 +6266,7 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev)
          * rt is a sector_t, so could be 32bit or 64bit.
          * So we divide before multiply in case it is 32bit and close
          * to the limit.
-         * We scale the divisor (db) by 32 to avoid loosing precision
+         * We scale the divisor (db) by 32 to avoid losing precision
          * near the end of resync when the number of remaining sectors
          * is close to 'db'.
          * We then divide rt by 32 after multiplying by db to compensate.
diff --git a/drivers/md/md.h b/drivers/md/md.h
index 12215d437fc..52b407369e1 100644
--- a/drivers/md/md.h
+++ b/drivers/md/md.h
@@ -94,7 +94,7 @@ struct mdk_rdev_s
 #define In_sync         2               /* device is in_sync with rest of array */
 #define WriteMostly     4               /* Avoid reading if at all possible */
 #define AutoDetected    7               /* added by auto-detect */
-#define Blocked         8               /* An error occured on an externally
+#define Blocked         8               /* An error occurred on an externally
                                          * managed array, don't allow writes
                                          * until it is cleared */
         wait_queue_head_t blocked_wait;
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index f7b62370b37..2da83d56659 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -5,7 +5,7 @@
  *
  * RAID-10 support for md.
  *
- * Base on code in raid1.c.  See raid1.c for futher copyright information.
+ * Base on code in raid1.c.  See raid1.c for further copyright information.
  *
  *
  * This program is free software; you can redistribute it and/or modify
@@ -340,14 +340,14 @@ static void raid10_end_write_request(struct bio *bio, int error)
 
 /*
  * RAID10 layout manager
- * Aswell as the chunksize and raid_disks count, there are two
+ * As well as the chunksize and raid_disks count, there are two
  * parameters: near_copies and far_copies.
  * near_copies * far_copies must be <= raid_disks.
  * Normally one of these will be 1.
  * If both are 1, we get raid0.
  * If near_copies == raid_disks, we get raid1.
  *
- * Chunks are layed out in raid0 style with near_copies copies of the
+ * Chunks are laid out in raid0 style with near_copies copies of the
  * first chunk, followed by near_copies copies of the next chunk and
  * so on.
  * If far_copies > 1, then after 1/far_copies of the array has been assigned
diff --git a/drivers/md/raid10.h b/drivers/md/raid10.h
index 2316ac2e8e2..944b1104d3b 100644
--- a/drivers/md/raid10.h
+++ b/drivers/md/raid10.h
@@ -17,8 +17,8 @@ struct r10_private_data_s {
         spinlock_t              device_lock;
 
         /* geometry */
-        int                     near_copies;  /* number of copies layed out raid0 style */
-        int                     far_copies;   /* number of copies layed out
+        int                     near_copies;  /* number of copies laid out raid0 style */
+        int                     far_copies;   /* number of copies laid out
                                                * at large strides across drives
                                                */
         int                     far_offset;   /* far_copies are offset by 1 stripe
diff --git a/drivers/media/common/saa7146_i2c.c b/drivers/media/common/saa7146_i2c.c
index 74ee172b5bc..b2ba9dc0dd6 100644
--- a/drivers/media/common/saa7146_i2c.c
+++ b/drivers/media/common/saa7146_i2c.c
@@ -161,7 +161,7 @@ static int saa7146_i2c_reset(struct saa7146_dev *dev)
                 msleep(SAA7146_I2C_DELAY);
         }
 
-        /* if any error is still present, a fatal error has occured ... */
+        /* if any error is still present, a fatal error has occurred ... */
         status = saa7146_i2c_status(dev);
         if ( dev->i2c_bitrate != status ) {
                 DEB_I2C(("fatal error. status:0x%08x\n",status));
@@ -326,9 +326,9 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
                         if ( 0 != err) {
                                 /* this one is unsatisfying: some i2c slaves on some
                                    dvb cards don't acknowledge correctly, so the saa7146
-                                   thinks that an address error occured. in that case, the
+                                   thinks that an address error occurred. in that case, the
                                    transaction should be retrying, even if an address error
-                                   occured. analog saa7146 based cards extensively rely on
+                                   occurred. analog saa7146 based cards extensively rely on
                                    i2c address probing, however, and address errors indicate that a
                                    device is really *not* there. retrying in that case
                                    increases the time the device needs to probe greatly, so
@@ -365,7 +365,7 @@ static int saa7146_i2c_transfer(struct saa7146_dev *dev, const struct i2c_msg *m
         DEB_I2C(("transmission successful. (msg:%d).\n",err));
 out:
         /* another bug in revision 0: the i2c-registers get uploaded randomly by other
-           uploads, so we better clear them out before continueing */
+           uploads, so we better clear them out before continuing */
         if( 0 == dev->revision ) {
                 __le32 zero = 0;
                 saa7146_i2c_reset(dev);
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
index 605e28b7326..0d6e0941904 100644
--- a/drivers/media/common/tuners/mxl5005s.c
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -106,7 +106,7 @@ enum {
 /* MXL5005 Tuner Register Struct */
 struct TunerReg {
         u16 Reg_Num;    /* Tuner Register Address */
-        u16 Reg_Val;    /* Current sw programmed value waiting to be writen */
+        u16 Reg_Val;    /* Current sw programmed value waiting to be written */
 };
 
 enum {
diff --git a/drivers/media/common/tuners/tda18271.h b/drivers/media/common/tuners/tda18271.h
index 3abb221f3d0..50cfa8cebb9 100644
--- a/drivers/media/common/tuners/tda18271.h
+++ b/drivers/media/common/tuners/tda18271.h
@@ -98,7 +98,7 @@ struct tda18271_config {
         /* output options that can be disabled */
         enum tda18271_output_options output_opt;
 
-        /* some i2c providers cant write all 39 registers at once */
+        /* some i2c providers can't write all 39 registers at once */
         enum tda18271_small_i2c small_i2c;
 
         /* force rf tracking filter calibration on startup */
diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c
index 227c0200b70..955254090a0 100644
--- a/drivers/media/dvb/b2c2/flexcop-pci.c
+++ b/drivers/media/dvb/b2c2/flexcop-pci.c
@@ -58,7 +58,7 @@ struct flexcop_pci {
 
         int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */
         u32 last_dma1_cur_pos;
-        /* position of the pointer last time the timer/packet irq occured */
+        /* position of the pointer last time the timer/packet irq occurred */
         int count;
         int count_prev;
         int stream_problem;
diff --git a/drivers/media/dvb/bt8xx/dvb-bt8xx.c b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
index 78fc469f0f6..1e1106dcd06 100644
--- a/drivers/media/dvb/bt8xx/dvb-bt8xx.c
+++ b/drivers/media/dvb/bt8xx/dvb-bt8xx.c
@@ -427,10 +427,10 @@ static void or51211_reset(struct dvb_frontend * fe)
         struct dvb_bt8xx_card *bt = fe->dvb->priv;
 
         /* RESET DEVICE
-         * reset is controled by GPIO-0
+         * reset is controlled by GPIO-0
          * when set to 0 causes reset and when to 1 for normal op
          * must remain reset for 128 clock cycles on a 50Mhz clock
-         * also PRM1 PRM2 & PRM4 are controled by GPIO-1,GPIO-2 & GPIO-4
+         * also PRM1 PRM2 & PRM4 are controlled by GPIO-1,GPIO-2 & GPIO-4
          * We assume that the reset has be held low long enough or we
          * have been reset by a power on.  When the driver is unloaded
          * reset set to 0 so if reloaded we have been reset.
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index cad6634610e..31e2c0d45db 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -1638,7 +1638,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
         case FE_READ_STATUS: {
                 fe_status_t* status = parg;
 
-                /* if retune was requested but hasn't occured yet, prevent
+                /* if retune was requested but hasn't occurred yet, prevent
                  * that user get signal state from previous tuning */
                 if (fepriv->state == FESTATE_RETUNE ||
                     fepriv->state == FESTATE_ERROR) {
@@ -1729,7 +1729,7 @@ static int dvb_frontend_ioctl_legacy(struct file *file,
                          * Dish network legacy switches (as used by Dish500)
                          * are controlled by sending 9-bit command words
                          * spaced 8msec apart.
-                         * the actual command word is switch/port dependant
+                         * the actual command word is switch/port dependent
                          * so it is up to the userspace application to send
                          * the right command.
                          * The command must always start with a '0' after
diff --git a/drivers/media/dvb/dvb-usb/af9005-fe.c b/drivers/media/dvb/dvb-usb/af9005-fe.c
index 199ece0d488..6ad94745bbd 100644
--- a/drivers/media/dvb/dvb-usb/af9005-fe.c
+++ b/drivers/media/dvb/dvb-usb/af9005-fe.c
@@ -580,7 +580,7 @@ static int af9005_fe_program_cfoe(struct dvb_usb_device *d, fe_bandwidth_t bw)
                 NS_coeff2_8k = 0x724925;
                 break;
         default:
-                err("Invalid bandwith %d.", bw);
+                err("Invalid bandwidth %d.", bw);
                 return -EINVAL;
         }
 
@@ -789,7 +789,7 @@ static int af9005_fe_select_bw(struct dvb_usb_device *d, fe_bandwidth_t bw)
                 temp = 2;
                 break;
         default:
-                err("Invalid bandwith %d.", bw);
+                err("Invalid bandwidth %d.", bw);
                 return -EINVAL;
         }
         return af9005_write_register_bits(d, xd_g_reg_bw, reg_bw_pos,
@@ -930,7 +930,7 @@ static int af9005_fe_init(struct dvb_frontend *fe)
         if (ret)
                 return ret;
 
-        /* init other parameters: program cfoe and select bandwith */
+        /* init other parameters: program cfoe and select bandwidth */
         deb_info("program cfoe\n");
         if ((ret = af9005_fe_program_cfoe(state->d, BANDWIDTH_6_MHZ)))
                 return ret;
@@ -1167,7 +1167,7 @@ static int af9005_fe_set_frontend(struct dvb_frontend *fe,
         if (ret)
                 return ret;
 
-        /* select bandwith */
+        /* select bandwidth */
         deb_info("select bandwidth");
         ret = af9005_fe_select_bw(state->d, fep->u.ofdm.bandwidth);
         if (ret)
diff --git a/drivers/media/dvb/dvb-usb/friio.h b/drivers/media/dvb/dvb-usb/friio.h
index af8d55e390f..0f461ca10cb 100644
--- a/drivers/media/dvb/dvb-usb/friio.h
+++ b/drivers/media/dvb/dvb-usb/friio.h
@@ -20,7 +20,7 @@
  *         Frontend:                             comtech JDVBT-90502
  *             (tuner PLL:                       tua6034, I2C addr:(0xC0 >> 1))
  *             (OFDM demodulator:                TC90502, I2C addr:(0x30 >> 1))
- *         LED x3 (+LNB) controll:               PIC 16F676
+ *         LED x3 (+LNB) control:                PIC 16F676
  *         EEPROM:                               24C08
  *
  *        (USB smart card reader:                AU9522)
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c
index cd26e7c1536..f2db01212ca 100644
--- a/drivers/media/dvb/dvb-usb/lmedm04.c
+++ b/drivers/media/dvb/dvb-usb/lmedm04.c
@@ -321,7 +321,7 @@ static int lme2510_int_read(struct dvb_usb_adapter *adap)
         lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
 
         usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
-        info("INT Interupt Service Started");
+        info("INT Interrupt Service Started");
 
         return 0;
 }
@@ -482,7 +482,7 @@ static int lme2510_msg(struct dvb_usb_device *d,
                         break;
                 }
 
-                deb_info(4, "I2C From Interupt Message out(%02x) in(%02x)",
+                deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
                                 wbuf[3], rbuf[1]);
 
         }
@@ -632,11 +632,11 @@ static int lme2510_int_service(struct dvb_usb_adapter *adap)
         }
         d->rc_dev = rc;
 
-        /* Start the Interupt */
+        /* Start the Interrupt */
         ret = lme2510_int_read(adap);
         if (ret < 0) {
                 rc_unregister_device(rc);
-                info("INT Unable to start Interupt Service");
+                info("INT Unable to start Interrupt Service");
                 return -ENODEV;
         }
 
@@ -1003,7 +1003,7 @@ static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
                 return -ENODEV;
         }
 
-        /* Start the Interupt & Remote*/
+        /* Start the Interrupt & Remote*/
         ret = lme2510_int_service(adap);
 
         return ret;
@@ -1171,7 +1171,7 @@ void *lme2510_exit_int(struct dvb_usb_device *d)
                 usb_kill_urb(st->lme_urb);
                 usb_free_coherent(d->udev, 5000, st->buffer,
                                   st->lme_urb->transfer_dma);
-                info("Interupt Service Stopped");
+                info("Interrupt Service Stopped");
                 rc_unregister_device(d->rc_dev);
                 info("Remote Stopped");
         }
diff --git a/drivers/media/dvb/frontends/atbm8830.h b/drivers/media/dvb/frontends/atbm8830.h
index e8149f39330..024273374bd 100644
--- a/drivers/media/dvb/frontends/atbm8830.h
+++ b/drivers/media/dvb/frontends/atbm8830.h
@@ -39,7 +39,7 @@ struct atbm8830_config {
         /* parallel or serial transport stream */
         u8 serial_ts;
 
-        /* transport stream clock output only when receving valid stream */
+        /* transport stream clock output only when receiving valid stream */
         u8 ts_clk_gated;
 
         /* Decoder sample TS data at rising edge of clock */
diff --git a/drivers/media/dvb/frontends/au8522_dig.c b/drivers/media/dvb/frontends/au8522_dig.c
index 65f6a36dfb2..1d572940e24 100644
--- a/drivers/media/dvb/frontends/au8522_dig.c
+++ b/drivers/media/dvb/frontends/au8522_dig.c
@@ -635,7 +635,7 @@ static int au8522_led_gpio_enable(struct au8522_state *state, int onoff)
         struct au8522_led_config *led_config = state->config->led_cfg;
         u8 val;
 
-        /* bail out if we cant control an LED */
+        /* bail out if we can't control an LED */
         if (!led_config || !led_config->gpio_output ||
             !led_config->gpio_output_enable || !led_config->gpio_output_disable)
                 return 0;
@@ -665,7 +665,7 @@ static int au8522_led_ctrl(struct au8522_state *state, int led)
         struct au8522_led_config *led_config = state->config->led_cfg;
         int i, ret = 0;
 
-        /* bail out if we cant control an LED */
+        /* bail out if we can't control an LED */
         if (!led_config || !led_config->gpio_leds ||
             !led_config->num_led_states || !led_config->led_states)
                 return 0;
@@ -803,7 +803,7 @@ static int au8522_led_status(struct au8522_state *state, const u16 *snr)
         int led;
         u16 strong;
 
-        /* bail out if we cant control an LED */
+        /* bail out if we can't control an LED */
         if (!led_config)
                 return 0;
 
diff --git a/drivers/media/dvb/frontends/bcm3510.c b/drivers/media/dvb/frontends/bcm3510.c
index cf5e576dfdc..8aff5868a5e 100644
--- a/drivers/media/dvb/frontends/bcm3510.c
+++ b/drivers/media/dvb/frontends/bcm3510.c
@@ -155,7 +155,7 @@ static int bcm3510_hab_send_request(struct bcm3510_state *st, u8 *buf, int len)
         unsigned long t;
 
 /* Check if any previous HAB request still needs to be serviced by the
- * Aquisition Processor before sending new request */
+ * Acquisition Processor before sending new request */
         if ((ret = bcm3510_readB(st,0xa8,&v)) < 0)
                 return ret;
         if (v.HABSTAT_a8.HABR) {
@@ -361,7 +361,7 @@ static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
 /* Set duration of the initial state of TUNCTL = 3.34 micro Sec */
         c.TUNCTL_state = 0x40;
 
-/* PRESCALER DEVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
+/* PRESCALER DIVIDE RATIO | BC1_2_3_4; (band switch), 1stosc REFERENCE COUNTER REF_S12 and REF_S11 */
         c.ctl_dat[0].ctrl.size = BITS_8;
         c.ctl_dat[0].data      = 0x80 | bc;
 
@@ -397,7 +397,7 @@ static int bcm3510_tuner_cmd(struct bcm3510_state* st,u8 bc, u16 n, u8 a)
         c.ctl_dat[7].ctrl.cs0  = 1;
         c.ctl_dat[7].data      = 0x40;
 
-/* PRESCALER DEVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
+/* PRESCALER DIVIDE RATIO, 2ndosc REFERENCE COUNTER REF_S12 and REF_S11 */
         c.ctl_dat[8].ctrl.size = BITS_8;
         c.ctl_dat[8].data      = 0x80;
 
diff --git a/drivers/media/dvb/frontends/cx22700.c b/drivers/media/dvb/frontends/cx22700.c
index 5fbc0fc37ec..0142214b013 100644
--- a/drivers/media/dvb/frontends/cx22700.c
+++ b/drivers/media/dvb/frontends/cx22700.c
@@ -179,7 +179,7 @@ static int cx22700_set_tps (struct cx22700_state *state, struct dvb_ofdm_paramet
         cx22700_writereg (state, 0x06, val);
 
         cx22700_writereg (state, 0x08, 0x04 | 0x02);  /* use user tps parameters */
-        cx22700_writereg (state, 0x08, 0x04);         /* restart aquisition */
+        cx22700_writereg (state, 0x08, 0x04);         /* restart acquisition */
 
         return 0;
 }
diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c
index ff6c4983051..3139558148b 100644
--- a/drivers/media/dvb/frontends/cx22702.c
+++ b/drivers/media/dvb/frontends/cx22702.c
@@ -55,7 +55,7 @@ MODULE_PARM_DESC(debug, "Enable verbose debug messages");
 
 /* Register values to initialise the demod */
 static const u8 init_tab[] = {
-        0x00, 0x00, /* Stop aquisition */
+        0x00, 0x00, /* Stop acquisition */
         0x0B, 0x06,
         0x09, 0x01,
         0x0D, 0x41,
@@ -310,7 +310,7 @@ static int cx22702_set_tps(struct dvb_frontend *fe,
                         & 0xfc);
                 cx22702_writereg(state, 0x0C,
                         (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
-                cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */
+                cx22702_writereg(state, 0x00, 0x01); /* Begin acquisition */
                 dprintk("%s: Autodetecting\n", __func__);
                 return 0;
         }
@@ -424,7 +424,7 @@ static int cx22702_set_tps(struct dvb_frontend *fe,
         cx22702_writereg(state, 0x0C,
                 (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40);
 
-        /* Begin channel aquisition */
+        /* Begin channel acquisition */
         cx22702_writereg(state, 0x00, 0x01);
 
         return 0;
diff --git a/drivers/media/dvb/frontends/cx24110.c b/drivers/media/dvb/frontends/cx24110.c
index 7a1a5bc337d..bf9c999aa47 100644
--- a/drivers/media/dvb/frontends/cx24110.c
+++ b/drivers/media/dvb/frontends/cx24110.c
@@ -544,7 +544,7 @@ static int cx24110_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_par
         cx24110_set_inversion (state, p->inversion);
         cx24110_set_fec (state, p->u.qpsk.fec_inner);
         cx24110_set_symbolrate (state, p->u.qpsk.symbol_rate);
-        cx24110_writereg(state,0x04,0x05); /* start aquisition */
+        cx24110_writereg(state,0x04,0x05); /* start acquisition */
 
         return 0;
 }
diff --git a/drivers/media/dvb/frontends/cx24113.h b/drivers/media/dvb/frontends/cx24113.h
index 5de0f7ffd8d..01eb7b9c28f 100644
--- a/drivers/media/dvb/frontends/cx24113.h
+++ b/drivers/media/dvb/frontends/cx24113.h
@@ -1,5 +1,5 @@
 /*
- *  Driver for Conexant CX24113/CX24128 Tuner (Satelite)
+ *  Driver for Conexant CX24113/CX24128 Tuner (Satellite)
  *
  *  Copyright (C) 2007-8 Patrick Boettcher <pb@linuxtv.org>
  *
diff --git a/drivers/media/dvb/frontends/cx24123.c b/drivers/media/dvb/frontends/cx24123.c
index fad6a990a39..b1dd8acc607 100644
--- a/drivers/media/dvb/frontends/cx24123.c
+++ b/drivers/media/dvb/frontends/cx24123.c
@@ -949,7 +949,7 @@ static int cx24123_set_frontend(struct dvb_frontend *fe,
         else
                 err("it seems I don't have a tuner...");
 
-        /* Enable automatic aquisition and reset cycle */
+        /* Enable automatic acquisition and reset cycle */
         cx24123_writereg(state, 0x03, (cx24123_readreg(state, 0x03) | 0x07));
         cx24123_writereg(state, 0x00, 0x10);
         cx24123_writereg(state, 0x00, 0);
diff --git a/drivers/media/dvb/frontends/drx397xD.c b/drivers/media/dvb/frontends/drx397xD.c
index a05007c8098..536f02b1733 100644
--- a/drivers/media/dvb/frontends/drx397xD.c
+++ b/drivers/media/dvb/frontends/drx397xD.c
@@ -1097,7 +1097,7 @@ static int drx397x_init(struct dvb_frontend *fe)
         s->config.ifagc.w0A = 0x3ff;
         s->config.ifagc.w0C = 0x388;
 
-        /* for signal strenght calculations */
+        /* for signal strength calculations */
         s->config.ss76 = 820;
         s->config.ss78 = 2200;
         s->config.ss7A = 150;
diff --git a/drivers/media/dvb/frontends/mb86a16.c b/drivers/media/dvb/frontends/mb86a16.c
index 33b63235b86..c283112051b 100644
--- a/drivers/media/dvb/frontends/mb86a16.c
+++ b/drivers/media/dvb/frontends/mb86a16.c
@@ -1630,7 +1630,7 @@ static enum dvbfe_search mb86a16_search(struct dvb_frontend *fe,
         state->srate = p->u.qpsk.symbol_rate / 1000;
 
         if (!mb86a16_set_fe(state)) {
-                dprintk(verbose, MB86A16_ERROR, 1, "Succesfully acquired LOCK");
+                dprintk(verbose, MB86A16_ERROR, 1, "Successfully acquired LOCK");
                 return DVBFE_ALGO_SEARCH_SUCCESS;
         }
 
diff --git a/drivers/media/dvb/frontends/mb86a20s.c b/drivers/media/dvb/frontends/mb86a20s.c
index cc4acd2f920..0f867a5055f 100644
--- a/drivers/media/dvb/frontends/mb86a20s.c
+++ b/drivers/media/dvb/frontends/mb86a20s.c
@@ -406,7 +406,7 @@ err:
                 printk(KERN_INFO "mb86a20s: Init failed. Will try again later\n");
         } else {
                 state->need_init = false;
-                dprintk("Initialization succeded.\n");
+                dprintk("Initialization succeeded.\n");
         }
         return rc;
 }
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 472907d4346..83e6f1a1b70 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -670,7 +670,7 @@ static int mt312_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
                 if (ret < 0)
                         goto error;
 
-                /* preserve this bit to not accidently shutdown ADC */
+                /* preserve this bit to not accidentally shutdown ADC */
                 val &= 0x80;
                 break;
         }
diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c
index e87b747ea99..17f8cdf8afe 100644
--- a/drivers/media/dvb/frontends/s5h1420.c
+++ b/drivers/media/dvb/frontends/s5h1420.c
@@ -225,7 +225,7 @@ static int s5h1420_recv_slave_reply (struct dvb_frontend* fe,
         unsigned long timeout;
         int result = 0;
 
-        /* setup for DISEQC recieve */
+        /* setup for DISEQC receive */
         val = s5h1420_readreg(state, 0x3b);
         s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */
         msleep(15);
diff --git a/drivers/media/dvb/frontends/stb6100.c b/drivers/media/dvb/frontends/stb6100.c
index 64673b8b64a..bc1a8af4f6e 100644
--- a/drivers/media/dvb/frontends/stb6100.c
+++ b/drivers/media/dvb/frontends/stb6100.c
@@ -360,7 +360,7 @@ static int stb6100_set_frequency(struct dvb_frontend *fe, u32 frequency)
         else
                 odiv = 0;
 
-        /* VCO enabled, seach clock off as per LL3.7, 3.4.1 */
+        /* VCO enabled, search clock off as per LL3.7, 3.4.1 */
         regs[STB6100_VCO] = 0xe0 | (odiv << STB6100_VCO_ODIV_SHIFT);
 
         /* OSM  */
diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c
index 4fd7479bb62..84d88f33275 100644
--- a/drivers/media/dvb/frontends/stv0297.c
+++ b/drivers/media/dvb/frontends/stv0297.c
@@ -435,7 +435,7 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par
                 return -EINVAL;
         }
 
-        // determine inversion dependant parameters
+        // determine inversion dependent parameters
         inversion = p->inversion;
         if (state->config->invert)
                 inversion = (inversion == INVERSION_ON) ? INVERSION_OFF : INVERSION_ON;
diff --git a/drivers/media/dvb/frontends/stv0367.c b/drivers/media/dvb/frontends/stv0367.c
index 4e0e6a873b8..e57ab53e2e2 100644
--- a/drivers/media/dvb/frontends/stv0367.c
+++ b/drivers/media/dvb/frontends/stv0367.c
@@ -1328,7 +1328,7 @@ stv0367_ter_signal_type stv0367ter_lock_algo(struct stv0367_state *state)
 
         /*guard=stv0367_readbits(state,F367TER_SYR_GUARD); */
 
-        /*supress EPQ auto for SYR_GARD 1/16 or 1/32
+        /*suppress EPQ auto for SYR_GARD 1/16 or 1/32
         and set channel predictor in automatic */
 #if 0
         switch (guard) {
diff --git a/drivers/media/dvb/frontends/stv0900_priv.h b/drivers/media/dvb/frontends/stv0900_priv.h
index b62b0f0a4fe..e0ea74c8e09 100644
--- a/drivers/media/dvb/frontends/stv0900_priv.h
+++ b/drivers/media/dvb/frontends/stv0900_priv.h
@@ -238,7 +238,7 @@ enum fe_stv0900_demod_mode {
 };
 
 struct stv0900_init_params{
-        u32     dmd_ref_clk;/* Refrence,Input clock for the demod in Hz */
+        u32     dmd_ref_clk;/* Reference,Input clock for the demod in Hz */
 
         /* Demodulator Type (single demod or dual demod) */
         enum fe_stv0900_demod_mode      demod_mode;
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index 41d0f0a6655..52d8712411e 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -1424,7 +1424,7 @@ static int stv090x_start_search(struct stv090x_state *state)
                         if (STV090x_WRITE_DEMOD(state, CFRLOW0, 0x00) < 0)
                                 goto err;
 
-                        /*enlarge the timing bandwith for Low SR*/
+                        /*enlarge the timing bandwidth for Low SR*/
                         if (STV090x_WRITE_DEMOD(state, RTCS2, 0x68) < 0)
                                 goto err;
                 } else {
@@ -1432,17 +1432,17 @@ static int stv090x_start_search(struct stv090x_state *state)
                         Set The carrier search up and low to auto mode */
                         if (STV090x_WRITE_DEMOD(state, CARCFG, 0xc4) < 0)
                                 goto err;
-                        /*reduce the timing bandwith for high SR*/
+                        /*reduce the timing bandwidth for high SR*/
                         if (STV090x_WRITE_DEMOD(state, RTCS2, 0x44) < 0)
                                 goto err;
                 }
         } else {
                 /* >= Cut 3 */
                 if (state->srate <= 5000000) {
-                        /* enlarge the timing bandwith for Low SR */
+                        /* enlarge the timing bandwidth for Low SR */
                         STV090x_WRITE_DEMOD(state, RTCS2, 0x68);
                 } else {
-                        /* reduce timing bandwith for high SR */
+                        /* reduce timing bandwidth for high SR */
                         STV090x_WRITE_DEMOD(state, RTCS2, 0x44);
                 }
 
@@ -2482,7 +2482,7 @@ static int stv090x_sw_algo(struct stv090x_state *state)
                                         dvbs2_fly_wheel = STV090x_GETFIELD_Px(reg, FLYWHEEL_CPT_FIELD);
                                 }
                                 if (dvbs2_fly_wheel < 0xd) {
-                                        /*FALSE lock, The demod is loosing lock */
+                                        /*FALSE lock, The demod is losing lock */
                                         lock = 0;
                                         if (trials < 2) {
                                                 if (state->internal->dev_ver >= 0x20) {
@@ -3202,7 +3202,7 @@ static enum stv090x_signal_state stv090x_algo(struct stv090x_state *state)
                         goto err;
                 if (STV090x_WRITE_DEMOD(state, CORRELMANT, 0x70) < 0)
                         goto err;
-                if (stv090x_set_srate(state, 1000000) < 0) /* inital srate = 1Msps */
+                if (stv090x_set_srate(state, 1000000) < 0) /* initial srate = 1Msps */
                         goto err;
         } else {
                 /* known srate */
diff --git a/drivers/media/dvb/mantis/mantis_uart.c b/drivers/media/dvb/mantis/mantis_uart.c
index 97b889e8a34..f807c8ba26e 100644
--- a/drivers/media/dvb/mantis/mantis_uart.c
+++ b/drivers/media/dvb/mantis/mantis_uart.c
@@ -172,7 +172,7 @@ int mantis_uart_init(struct mantis_pci *mantis)
         mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL);
 
         schedule_work(&mantis->uart_work);
-        dprintk(MANTIS_DEBUG, 1, "UART succesfully initialized");
+        dprintk(MANTIS_DEBUG, 1, "UART successfully initialized");
 
         return 0;
 }
diff --git a/drivers/media/dvb/ngene/ngene-core.c b/drivers/media/dvb/ngene/ngene-core.c
index 175a0f6c2a4..ccc2d1af49d 100644
--- a/drivers/media/dvb/ngene/ngene-core.c
+++ b/drivers/media/dvb/ngene/ngene-core.c
@@ -122,7 +122,7 @@ static void demux_tasklet(unsigned long data)
                                                 Cur->ngeneBuffer.SR.Flags &=
                                                         ~0x40;
                                                 break;
-                                                /* Stop proccessing stream */
+                                                /* Stop processing stream */
                                         }
                                 } else {
                                         /* We got a valid buffer,
@@ -133,7 +133,7 @@ static void demux_tasklet(unsigned long data)
                                 printk(KERN_ERR DEVICE_NAME ": OOPS\n");
                                 if (chan->HWState == HWSTATE_RUN) {
                                         Cur->ngeneBuffer.SR.Flags &= ~0x40;
-                                        break;  /* Stop proccessing stream */
+                                        break;  /* Stop processing stream */
                                 }
                         }
                         if (chan->AudioDTOUpdated) {
diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c
index 6ca6713d527..7cb79ec685f 100644
--- a/drivers/media/dvb/pluto2/pluto2.c
+++ b/drivers/media/dvb/pluto2/pluto2.c
@@ -294,13 +294,13 @@ static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets)
 
         /* Workaround for broken hardware:
          * [1] On startup NBPACKETS seems to contain an uninitialized value,
-         *     but no packets have been transfered.
+         *     but no packets have been transferred.
          * [2] Sometimes (actually very often) NBPACKETS stays at zero
-         *     although one packet has been transfered.
+         *     although one packet has been transferred.
          * [3] Sometimes (actually rarely), the card gets into an erroneous
          *     mode where it continuously generates interrupts, claiming it
-         *     has recieved nbpackets>TS_DMA_PACKETS packets, but no packet
-         *     has been transfered. Only a reset seems to solve this
+         *     has received nbpackets>TS_DMA_PACKETS packets, but no packet
+         *     has been transferred. Only a reset seems to solve this
          */
         if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) {
                 unsigned int i = 0;
@@ -332,7 +332,7 @@ static irqreturn_t pluto_irq(int irq, void *dev_id)
         struct pluto *pluto = dev_id;
         u32 tscr;
 
-        /* check whether an interrupt occured on this device */
+        /* check whether an interrupt occurred on this device */
         tscr = pluto_readreg(pluto, REG_TSCR);
         if (!(tscr & (TSCR_DE | TSCR_OVR)))
                 return IRQ_NONE;
diff --git a/drivers/media/dvb/siano/smsdvb.c b/drivers/media/dvb/siano/smsdvb.c
index b80d09b035a..37c594f8278 100644
--- a/drivers/media/dvb/siano/smsdvb.c
+++ b/drivers/media/dvb/siano/smsdvb.c
@@ -650,7 +650,7 @@ static int smsdvb_dvbt_set_frontend(struct dvb_frontend *fe,
                 if (status & FE_HAS_LOCK)
                         return ret;
 
-                /* previous tune didnt lock - enable LNA and tune again */
+                /* previous tune didn't lock - enable LNA and tune again */
                 sms_board_lna_control(client->coredev, 1);
         }
 
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index fc0a60f8a1e..3d20719fce1 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -2332,7 +2332,7 @@ static int frontend_init(struct av7110 *av7110)
  * increment. That's how the 7146 is programmed to do event
  * counting in this budget-patch.c
  * I *think* HPS setting has something to do with the phase
- * of HS but I cant be 100% sure in that.
+ * of HS but I can't be 100% sure in that.
  *
  * hardware debug note: a working budget card (including budget patch)
  * with vpeirq() interrupt setup in mode "0x90" (every 64K) will
diff --git a/drivers/media/dvb/ttpci/budget-patch.c b/drivers/media/dvb/ttpci/budget-patch.c
index 57983559069..3395d1a9051 100644
--- a/drivers/media/dvb/ttpci/budget-patch.c
+++ b/drivers/media/dvb/ttpci/budget-patch.c
@@ -539,7 +539,7 @@ static int budget_patch_attach (struct saa7146_dev* dev, struct saa7146_pci_exte
 **      increment. That's how the 7146 is programmed to do event
 **      counting in this budget-patch.c
 **      I *think* HPS setting has something to do with the phase
-**      of HS but I cant be 100% sure in that.
+**      of HS but I can't be 100% sure in that.
 
 **      hardware debug note: a working budget card (including budget patch)
 **      with vpeirq() interrupt setup in mode "0x90" (every 64K) will
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index fe1b8037b24..f893bffa08a 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -234,7 +234,7 @@ static void ttusb_dec_handle_irq( struct urb *urb)
                  * (with buffer[3] == 0x40) in an intervall of ~100ms.
                  * But to handle this correctly we had to imlemenent some
                  * kind of timer which signals a 'key up' event if no
-                 * keyrepeat signal is recieved for lets say 200ms.
+                 * keyrepeat signal is received for lets say 200ms.
                  * this should/could be added later ...
                  * for now lets report each signal as a key down and up*/
                 dprintk("%s:rc signal:%d\n", __func__, buffer[4]);
diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c
index e6b2d085a44..b3a635b9582 100644
--- a/drivers/media/radio/radio-mr800.c
+++ b/drivers/media/radio/radio-mr800.c
@@ -99,7 +99,7 @@ devices, that would be 76 and 91.  */
 
 /*
  * Commands that device should understand
- * List isnt full and will be updated with implementation of new functions
+ * List isn't full and will be updated with implementation of new functions
  */
 #define AMRADIO_SET_FREQ        0xa4
 #define AMRADIO_SET_MUTE        0xab
diff --git a/drivers/media/radio/si4713-i2c.c b/drivers/media/radio/si4713-i2c.c
index 0fab6f8f7e2..deca2e06ff2 100644
--- a/drivers/media/radio/si4713-i2c.c
+++ b/drivers/media/radio/si4713-i2c.c
@@ -481,7 +481,7 @@ unlock:
 }
 
 /*
- * si4713_wait_stc - Waits STC interrupt and clears status bits. Usefull
+ * si4713_wait_stc - Waits STC interrupt and clears status bits. Useful
  *                   for TX_TUNE_POWER, TX_TUNE_FREQ and TX_TUNE_MEAS
  * @sdev: si4713_device structure for the device we are communicating
  * @usecs: timeout to wait for STC interrupt signal
diff --git a/drivers/media/radio/wl128x/fmdrv_common.c b/drivers/media/radio/wl128x/fmdrv_common.c
index 64454d39c0c..26fb9cbd753 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.c
+++ b/drivers/media/radio/wl128x/fmdrv_common.c
@@ -352,7 +352,7 @@ static void send_tasklet(unsigned long arg)
         if (!atomic_read(&fmdev->tx_cnt))
                 return;
 
-        /* Check, is there any timeout happenned to last transmitted packet */
+        /* Check, is there any timeout happened to last transmitted packet */
         if ((jiffies - fmdev->last_tx_jiffies) > FM_DRV_TX_TIMEOUT) {
                 fmerr("TX timeout occurred\n");
                 atomic_set(&fmdev->tx_cnt, 1);
@@ -478,7 +478,7 @@ u32 fmc_send_cmd(struct fmdev *fmdev, u8 fm_op, u16 type, void *payload,
                 return -ETIMEDOUT;
         }
         if (!fmdev->resp_skb) {
-                fmerr("Reponse SKB is missing\n");
+                fmerr("Response SKB is missing\n");
                 return -EFAULT;
         }
         spin_lock_irqsave(&fmdev->resp_skb_lock, flags);
@@ -1592,7 +1592,7 @@ u32 fmc_release(struct fmdev *fmdev)
                 fmdbg("FM Core is already down\n");
                 return 0;
         }
-        /* Sevice pending read */
+        /* Service pending read */
         wake_up_interruptible(&fmdev->rx.rds.read_queue);
 
         tasklet_kill(&fmdev->tx_task);
diff --git a/drivers/media/radio/wl128x/fmdrv_common.h b/drivers/media/radio/wl128x/fmdrv_common.h
index 427c4164cec..aee243bb663 100644
--- a/drivers/media/radio/wl128x/fmdrv_common.h
+++ b/drivers/media/radio/wl128x/fmdrv_common.h
@@ -362,7 +362,7 @@ struct fm_event_msg_hdr {
 #define FM_TX_PREEMPH_50US              0
 #define FM_TX_PREEMPH_75US              2
 
-/* FM TX antenna impedence values */
+/* FM TX antenna impedance values */
 #define FM_TX_ANT_IMP_50                0
 #define FM_TX_ANT_IMP_200               1
 #define FM_TX_ANT_IMP_500               2
diff --git a/drivers/media/rc/ene_ir.c b/drivers/media/rc/ene_ir.c
index 1ac49139158..a43ed6c41bf 100644
--- a/drivers/media/rc/ene_ir.c
+++ b/drivers/media/rc/ene_ir.c
@@ -520,7 +520,7 @@ static void ene_rx_disable(struct ene_device *dev)
         dev->rx_enabled = false;
 }
 
-/* This resets the receiver. Usefull to stop stream of spaces at end of
+/* This resets the receiver. Useful to stop stream of spaces at end of
  * transmission
  */
 static void ene_rx_reset(struct ene_device *dev)
@@ -1089,7 +1089,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
         if (error < 0)
                 goto error;
 
-        ene_notice("driver has been succesfully loaded");
+        ene_notice("driver has been successfully loaded");
         return 0;
 error:
         if (dev && dev->irq >= 0)
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index f714e1a22c9..ebd68edf5b2 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1293,7 +1293,7 @@ static void imon_pad_to_keys(struct imon_context *ictx, unsigned char *buf)
          * contain a position coordinate (x,y), with each component ranging
          * from -14 to 14. We want to down-sample this to only 4 discrete values
          * for up/down/left/right arrow keys. Also, when you get too close to
-         * diagonals, it has a tendancy to jump back and forth, so lets try to
+         * diagonals, it has a tendency to jump back and forth, so lets try to
          * ignore when they get too close.
          */
         if (ictx->product != 0xffdc) {
diff --git a/drivers/media/rc/ir-raw.c b/drivers/media/rc/ir-raw.c
index 01f258a2a57..11c19d8d0ee 100644
--- a/drivers/media/rc/ir-raw.c
+++ b/drivers/media/rc/ir-raw.c
@@ -153,7 +153,7 @@ EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
  * @type:       the type of the event that has occurred
  *
  * This routine (which may be called from an interrupt context) works
- * in similiar manner to ir_raw_event_store_edge.
+ * in similar manner to ir_raw_event_store_edge.
  * This routine is intended for devices with limited internal buffer
  * It automerges samples of same type, and handles timeouts
  */
diff --git a/drivers/media/rc/keymaps/rc-lme2510.c b/drivers/media/rc/keymaps/rc-lme2510.c
index 3c1913926c1..afae14fd152 100644
--- a/drivers/media/rc/keymaps/rc-lme2510.c
+++ b/drivers/media/rc/keymaps/rc-lme2510.c
@@ -55,7 +55,7 @@ static struct rc_map_table lme2510_rc[] = {
         { 0xff40fb04, KEY_MEDIA_REPEAT}, /* Recall */
         { 0xff40e51a, KEY_PAUSE }, /* Timeshift */
         { 0xff40fd02, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
-        { 0xff40f906, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/
+        { 0xff40f906, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
         { 0xff40fe01, KEY_CHANNELUP },
         { 0xff40fa05, KEY_CHANNELDOWN },
         { 0xff40eb14, KEY_ZOOM },
@@ -76,7 +76,7 @@ static struct rc_map_table lme2510_rc[] = {
         { 0xff00bb44, KEY_MEDIA_REPEAT}, /* Recall */
         { 0xff00b54a, KEY_PAUSE }, /* Timeshift */
         { 0xff00b847, KEY_VOLUMEUP }, /* 2 x -/+ Keys not marked */
-        { 0xff00bc43, KEY_VOLUMEDOWN }, /* Volumne defined as right hand*/
+        { 0xff00bc43, KEY_VOLUMEDOWN }, /* Volume defined as right hand*/
         { 0xff00b946, KEY_CHANNELUP },
         { 0xff00bf40, KEY_CHANNELDOWN },
         { 0xff00f708, KEY_ZOOM },
diff --git a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
index 18b37facb0d..fdd213ff1ad 100644
--- a/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
+++ b/drivers/media/rc/keymaps/rc-msi-tvanywhere.c
@@ -29,7 +29,7 @@ static struct rc_map_table msi_tvanywhere[] = {
 
         { 0x0c, KEY_MUTE },
         { 0x0f, KEY_SCREEN },           /* Full Screen */
-        { 0x10, KEY_FN },               /* Funtion */
+        { 0x10, KEY_FN },               /* Function */
         { 0x11, KEY_TIME },             /* Time shift */
         { 0x12, KEY_POWER },
         { 0x13, KEY_MEDIA },            /* MTS */
diff --git a/drivers/media/rc/keymaps/rc-norwood.c b/drivers/media/rc/keymaps/rc-norwood.c
index f1c1281fbc1..f9f2fa2819b 100644
--- a/drivers/media/rc/keymaps/rc-norwood.c
+++ b/drivers/media/rc/keymaps/rc-norwood.c
@@ -49,7 +49,7 @@ static struct rc_map_table norwood[] = {
         { 0x37, KEY_PLAY },             /* Play                */
         { 0x36, KEY_PAUSE },            /* Pause               */
         { 0x2b, KEY_STOP },             /* Stop                */
-        { 0x67, KEY_FASTFORWARD },      /* Foward              */
+        { 0x67, KEY_FASTFORWARD },      /* Forward              */
         { 0x66, KEY_REWIND },           /* Rewind              */
         { 0x3e, KEY_SEARCH },           /* Auto Scan           */
         { 0x2e, KEY_CAMERA },           /* Capture Video       */
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index 5ac1baf45c8..f53f9c68d38 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -255,7 +255,7 @@ static unsigned int ir_update_mapping(struct rc_dev *dev,
  * @rc_map:     scancode table to be searched
  * @scancode:   the desired scancode
  * @resize:     controls whether we allowed to resize the table to
- *              accomodate not yet present scancodes
+ *              accommodate not yet present scancodes
  * @return:     index of the mapping containing scancode in question
  *              or -1U in case of failure.
  *
@@ -1037,7 +1037,7 @@ int rc_register_device(struct rc_dev *dev)
                 goto out_table;
 
         /*
-         * Default delay of 250ms is too short for some protocols, expecially
+         * Default delay of 250ms is too short for some protocols, especially
          * since the timeout is currently set to 250ms. Increase it to 500ms,
          * to avoid wrong repetition of the keycodes. Note that this must be
          * set after the call to input_register_device().
diff --git a/drivers/media/video/au0828/au0828-video.c b/drivers/media/video/au0828/au0828-video.c
index 6ad83a15d07..c03eb29a9ee 100644
--- a/drivers/media/video/au0828/au0828-video.c
+++ b/drivers/media/video/au0828/au0828-video.c
@@ -502,7 +502,7 @@ static inline void vbi_get_next_buf(struct au0828_dmaqueue *dma_q,
 
         /* Get the next buffer */
         *buf = list_entry(dma_q->active.next, struct au0828_buffer, vb.queue);
-        /* Cleans up buffer - Usefull for testing for frame/URB loss */
+        /* Cleans up buffer - Useful for testing for frame/URB loss */
         outp = videobuf_to_vmalloc(&(*buf)->vb);
         memset(outp, 0x00, (*buf)->vb.size);
 
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index 242f0d51223..3c9e6c7e7b5 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -2244,8 +2244,8 @@ struct tvcard bttv_tvcards[] = {
         },
         [BTTV_BOARD_PICOLO_TETRA_CHIP] = {
                 /*Eric DEBIEF <debief@telemsa.com>*/
-                /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
-                /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
+                /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
+                /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
                 /*0x79 in bttv.h*/
                 .name           = "Euresys Picolo Tetra",
                 .video_inputs   = 4,
@@ -4567,7 +4567,7 @@ static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
  * at one input while the monitor is looking at another.
  *
  * Since I've couldn't be bothered figuring out how to add an
- * independant muxsel for the monitor bus, I've just set it to
+ * independent muxsel for the monitor bus, I've just set it to
  * whatever the card is looking at.
  *
  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
diff --git a/drivers/media/video/bt8xx/bttv-gpio.c b/drivers/media/video/bt8xx/bttv-gpio.c
index fd604d32bbb..13ce72c04b3 100644
--- a/drivers/media/video/bt8xx/bttv-gpio.c
+++ b/drivers/media/video/bt8xx/bttv-gpio.c
@@ -3,7 +3,7 @@
     bttv-gpio.c  --  gpio sub drivers
 
     sysfs-based sub driver interface for bttv
-    mainly intented for gpio access
+    mainly intended for gpio access
 
 
     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 55ffd60ffa7..66470339849 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -383,7 +383,7 @@ static int cafe_smbus_write_data(struct cafe_camera *cam,
          * causes the device to die.
          * Use a busy-wait because we often send a large quantity of small
          * commands at-once; using msleep() would cause a lot of context
-         * switches which take longer than 2ms, resulting in a noticable
+         * switches which take longer than 2ms, resulting in a noticeable
          * boot-time and capture-start delays.
          */
         mdelay(2);
diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h
index 188c9c3d2db..e9c69d9c9e4 100644
--- a/drivers/media/video/cx18/cx18-av-core.h
+++ b/drivers/media/video/cx18/cx18-av-core.h
@@ -109,7 +109,7 @@ struct cx18_av_state {
         int is_initialized;
 
         /*
-         * The VBI slicer starts operating and counting lines, begining at
+         * The VBI slicer starts operating and counting lines, beginning at
          * slicer line count of 1, at D lines after the deassertion of VRESET.
          * This staring field line, S, is 6 (& 319) or 10 (& 273) for 625 or 525
          * line systems respectively.  Sliced ancillary data captured on VBI
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index 86c30b9963e..4f041c033c5 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -312,7 +312,7 @@ static int cx18_s_fmt_vbi_cap(struct file *file, void *fh,
 
         /*
          * Set the digitizer registers for raw active VBI.
-         * Note cx18_av_vbi_wipes out alot of the passed in fmt under valid
+         * Note cx18_av_vbi_wipes out a lot of the passed in fmt under valid
          * calling conditions
          */
         ret = v4l2_subdev_call(cx->sd_av, vbi, s_raw_fmt, &fmt->fmt.vbi);
diff --git a/drivers/media/video/cx18/cx18-vbi.c b/drivers/media/video/cx18/cx18-vbi.c
index 582227522cf..6d3121ff45a 100644
--- a/drivers/media/video/cx18/cx18-vbi.c
+++ b/drivers/media/video/cx18/cx18-vbi.c
@@ -29,7 +29,7 @@
 /*
  * Raster Reference/Protection (RP) bytes, used in Start/End Active
  * Video codes emitted from the digitzer in VIP 1.x mode, that flag the start
- * of VBI sample or VBI ancilliary data regions in the digitial ratser line.
+ * of VBI sample or VBI ancillary data regions in the digitial ratser line.
  *
  * Task FieldEven VerticalBlank HorizontalBlank 0 0 0 0
  */
diff --git a/drivers/media/video/cx231xx/cx231xx-avcore.c b/drivers/media/video/cx231xx/cx231xx-avcore.c
index 62843d39817..280df43ca44 100644
--- a/drivers/media/video/cx231xx/cx231xx-avcore.c
+++ b/drivers/media/video/cx231xx/cx231xx-avcore.c
@@ -2577,7 +2577,7 @@ int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type)
                         break;
 
                 case 6: /* ts1 parallel mode */
-                        cx231xx_info("%s: set ts1 parrallel mode registers\n",
+                        cx231xx_info("%s: set ts1 parallel mode registers\n",
                                      __func__);
                         status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100);
                         status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400);
diff --git a/drivers/media/video/cx231xx/cx231xx-vbi.c b/drivers/media/video/cx231xx/cx231xx-vbi.c
index 1d914488dbb..1c7a4daafec 100644
--- a/drivers/media/video/cx231xx/cx231xx-vbi.c
+++ b/drivers/media/video/cx231xx/cx231xx-vbi.c
@@ -631,7 +631,7 @@ static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q,
         /* Get the next buffer */
         *buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);
 
-        /* Cleans up buffer - Usefull for testing for frame/URB loss */
+        /* Cleans up buffer - Useful for testing for frame/URB loss */
         outp = videobuf_to_vmalloc(&(*buf)->vb);
         memset(outp, 0, (*buf)->vb.size);
 
diff --git a/drivers/media/video/cx231xx/cx231xx-video.c b/drivers/media/video/cx231xx/cx231xx-video.c
index ffd5af914c4..a69c24d8db0 100644
--- a/drivers/media/video/cx231xx/cx231xx-video.c
+++ b/drivers/media/video/cx231xx/cx231xx-video.c
@@ -309,7 +309,7 @@ static inline void get_next_buf(struct cx231xx_dmaqueue *dma_q,
         /* Get the next buffer */
         *buf = list_entry(dma_q->active.next, struct cx231xx_buffer, vb.queue);
 
-        /* Cleans up buffer - Usefull for testing for frame/URB loss */
+        /* Cleans up buffer - Useful for testing for frame/URB loss */
         outp = videobuf_to_vmalloc(&(*buf)->vb);
         memset(outp, 0, (*buf)->vb.size);
 
diff --git a/drivers/media/video/cx23885/cimax2.c b/drivers/media/video/cx23885/cimax2.c
index 209b971bd26..c9f15d6dec4 100644
--- a/drivers/media/video/cx23885/cimax2.c
+++ b/drivers/media/video/cx23885/cimax2.c
@@ -449,7 +449,7 @@ int netup_ci_init(struct cx23885_tsport *port)
                 0x04, /* ack active low */
                 0x00, /* LOCK = 0 */
                 0x33, /* serial mode, rising in, rising out, MSB first*/
-                0x31, /* syncronization */
+                0x31, /* synchronization */
         };
         int ret;
 
diff --git a/drivers/media/video/cx23885/cx23885.h b/drivers/media/video/cx23885/cx23885.h
index 8db2797bc7c..c186473fc57 100644
--- a/drivers/media/video/cx23885/cx23885.h
+++ b/drivers/media/video/cx23885/cx23885.h
@@ -214,7 +214,7 @@ struct cx23885_board {
 
         /* Vendors can and do run the PCIe bridge at different
          * clock rates, driven physically by crystals on the PCBs.
-         * The core has to accomodate this. This allows the user
+         * The core has to accommodate this. This allows the user
          * to add new boards with new frequencys. The value is
          * expressed in Hz.
          *
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 35796e03524..b7ee2ae7058 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -2,7 +2,7 @@
  *
  * Copyright (C) 2004 Ulf Eklund
  *
- * Based on the saa7115 driver and on the first verison of Chris Kennedy's
+ * Based on the saa7115 driver and on the first version of Chris Kennedy's
  * cx25840 driver.
  *
  * Changes by Tyler Trafford <tatrafford@comcast.net>
@@ -445,7 +445,7 @@ static void cx25840_initialize(struct i2c_client *client)
         cx25840_write(client, 0x918, 0xa0);
         cx25840_write(client, 0x919, 0x01);
 
-        /* stereo prefered */
+        /* stereo preferred */
         cx25840_write(client, 0x809, 0x04);
         /* AC97 shift */
         cx25840_write(client, 0x8cf, 0x0f);
@@ -546,7 +546,7 @@ static void cx23885_initialize(struct i2c_client *client)
          * Aux PLL
          * Initial setup for audio sample clock:
          * 48 ksps, 16 bits/sample, x160 multiplier = 122.88 MHz
-         * Intial I2S output/master clock(?):
+         * Initial I2S output/master clock(?):
          * 48 ksps, 16 bits/sample, x16 multiplier = 12.288 MHz
          */
         switch (state->id) {
@@ -903,7 +903,7 @@ static void input_change(struct i2c_client *client)
         } else if (std & V4L2_STD_PAL) {
                 /* Autodetect audio standard and audio system */
                 cx25840_write(client, 0x808, 0xff);
-                /* Since system PAL-L is pretty much non-existant and
+                /* Since system PAL-L is pretty much non-existent and
                    not used by any public broadcast network, force
                    6.5 MHz carrier to be interpreted as System DK,
                    this avoids DK audio detection instability */
@@ -1851,7 +1851,7 @@ static u32 get_cx2388x_ident(struct i2c_client *client)
                         ret = V4L2_IDENT_CX23885_AV;
                 } else {
                         /* CX23887 has a broken DIF, but the registers
-                         * appear valid (but unsed), good enough to detect. */
+                         * appear valid (but unused), good enough to detect. */
                         ret = V4L2_IDENT_CX23887_AV;
                 }
         } else if (cx25840_read4(client, 0x300) & 0x0fffffff) {
diff --git a/drivers/media/video/davinci/dm644x_ccdc.c b/drivers/media/video/davinci/dm644x_ccdc.c
index 490aafb34e2..c8b32c1c738 100644
--- a/drivers/media/video/davinci/dm644x_ccdc.c
+++ b/drivers/media/video/davinci/dm644x_ccdc.c
@@ -258,7 +258,7 @@ static int ccdc_update_raw_params(struct ccdc_config_params_raw *raw_params)
         /*
          * Allocate memory for FPC table if current
          * FPC table buffer is not big enough to
-         * accomodate FPC Number requested
+         * accommodate FPC Number requested
          */
         if (raw_params->fault_pxl.fp_num != config_params->fault_pxl.fp_num) {
                 if (fpc_physaddr != NULL) {
@@ -436,7 +436,7 @@ void ccdc_config_ycbcr(void)
 
         /*
          * configure the horizontal line offset. This should be a
-         * on 32 byte bondary. So clear LSB 5 bits
+         * on 32 byte boundary. So clear LSB 5 bits
          */
         regw(((params->win.width * 2  + 31) & ~0x1f), CCDC_HSIZE_OFF);
 
diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
index 71e961e53a5..5b38fc93ff2 100644
--- a/drivers/media/video/davinci/vpfe_capture.c
+++ b/drivers/media/video/davinci/vpfe_capture.c
@@ -1691,7 +1691,7 @@ static int vpfe_s_crop(struct file *file, void *priv,
                 goto unlock_out;
         }
 
-        /* adjust the width to 16 pixel boundry */
+        /* adjust the width to 16 pixel boundary */
         crop->c.width = ((crop->c.width + 15) & ~0xf);
 
         /* make sure parameters are valid */
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index a83131bd00b..7b6461d2d1f 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -377,7 +377,7 @@ static inline void get_next_buf(struct em28xx_dmaqueue *dma_q,
         /* Get the next buffer */
         *buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue);
 
-        /* Cleans up buffer - Usefull for testing for frame/URB loss */
+        /* Cleans up buffer - Useful for testing for frame/URB loss */
         outp = videobuf_to_vmalloc(&(*buf)->vb);
         memset(outp, 0, (*buf)->vb.size);
 
@@ -404,7 +404,7 @@ static inline void vbi_get_next_buf(struct em28xx_dmaqueue *dma_q,
 
         /* Get the next buffer */
         *buf = list_entry(dma_q->active.next, struct em28xx_buffer, vb.queue);
-        /* Cleans up buffer - Usefull for testing for frame/URB loss */
+        /* Cleans up buffer - Useful for testing for frame/URB loss */
         outp = videobuf_to_vmalloc(&(*buf)->vb);
         memset(outp, 0x00, (*buf)->vb.size);
 
diff --git a/drivers/media/video/gspca/gl860/gl860-mi1320.c b/drivers/media/video/gspca/gl860/gl860-mi1320.c
index c276a7debde..b57160e0486 100644
--- a/drivers/media/video/gspca/gl860/gl860-mi1320.c
+++ b/drivers/media/video/gspca/gl860/gl860-mi1320.c
@@ -201,7 +201,7 @@ void mi1320_init_settings(struct gspca_dev *gspca_dev)
         sd->vmax.backlight  =  2;
         sd->vmax.brightness =  8;
         sd->vmax.sharpness  =  7;
-        sd->vmax.contrast   =  0; /* 10 but not working with tihs driver */
+        sd->vmax.contrast   =  0; /* 10 but not working with this driver */
         sd->vmax.gamma      = 40;
         sd->vmax.hue        =  5 + 1;
         sd->vmax.saturation =  8;
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 9c6a643caf0..e526aa3deda 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -857,7 +857,7 @@ static int gspca_init_transfer(struct gspca_dev *gspca_dev)
                 }
 
                 /* the bandwidth is not wide enough
-                 * negociate or try a lower alternate setting */
+                 * negotiate or try a lower alternate setting */
                 PDEBUG(D_ERR|D_STREAM,
                         "bandwidth not wide enough - trying again");
                 msleep(20);     /* wait for kill complete */
@@ -2346,7 +2346,7 @@ void gspca_disconnect(struct usb_interface *intf)
         usb_set_intfdata(intf, NULL);
 
         /* release the device */
-        /* (this will call gspca_release() immediatly or on last close) */
+        /* (this will call gspca_release() immediately or on last close) */
         video_unregister_device(&gspca_dev->vdev);
 
 /*      PDEBUG(D_PROBE, "disconnect complete"); */
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index cb4d0bf0d78..0196209a948 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -361,7 +361,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
                 mi_w(gspca_dev, i + 1, mi_data[i]);
 
         data[0] = 0x00;
-        data[1] = 0x4d;         /* ISOC transfering enable... */
+        data[1] = 0x4d;         /* ISOC transferring enable... */
         reg_w(gspca_dev, 2);
 
         gspca_dev->ctrl_inac = 0; /* activate the illuminator controls */
diff --git a/drivers/media/video/gspca/mr97310a.c b/drivers/media/video/gspca/mr97310a.c
index 3884c9d300c..97e50796743 100644
--- a/drivers/media/video/gspca/mr97310a.c
+++ b/drivers/media/video/gspca/mr97310a.c
@@ -469,7 +469,7 @@ static void lcd_stop(struct gspca_dev *gspca_dev)
 static int isoc_enable(struct gspca_dev *gspca_dev)
 {
         gspca_dev->usb_buf[0] = 0x00;
-        gspca_dev->usb_buf[1] = 0x4d;  /* ISOC transfering enable... */
+        gspca_dev->usb_buf[1] = 0x4d;  /* ISOC transferring enable... */
         return mr_write(gspca_dev, 2);
 }
 
diff --git a/drivers/media/video/gspca/ov519.c b/drivers/media/video/gspca/ov519.c
index fd1b6082c96..36a46fc7873 100644
--- a/drivers/media/video/gspca/ov519.c
+++ b/drivers/media/video/gspca/ov519.c
@@ -381,7 +381,7 @@ static const struct v4l2_pix_format ov519_sif_mode[] = {
    larger then necessary, however they need to be this big as the ov511 /
    ov518 always fills the entire isoc frame, using 0 padding bytes when
    it doesn't have any data. So with low framerates the amount of data
-   transfered can become quite large (libv4l will remove all the 0 padding
+   transferred can become quite large (libv4l will remove all the 0 padding
    in userspace). */
 static const struct v4l2_pix_format ov518_vga_mode[] = {
         {320, 240, V4L2_PIX_FMT_OV518, V4L2_FIELD_NONE,
@@ -4368,7 +4368,7 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
                                 gspca_dev->last_packet_type = DISCARD_PACKET;
                                 return;
                         }
-                        /* Add 11 byte footer to frame, might be usefull */
+                        /* Add 11 byte footer to frame, might be useful */
                         gspca_frame_add(gspca_dev, LAST_PACKET, in, 11);
                         return;
                 } else {
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c
index 5a08738fba3..146b459b08d 100644
--- a/drivers/media/video/gspca/sonixb.c
+++ b/drivers/media/video/gspca/sonixb.c
@@ -827,7 +827,7 @@ static void setexposure(struct gspca_dev *gspca_dev)
                    possible to use less exposure then what the fps maximum
                    allows by setting register 10. register 10 configures the
                    actual exposure as quotient of the full exposure, with 0
-                   being no exposure at all (not very usefull) and reg10_max
+                   being no exposure at all (not very useful) and reg10_max
                    being max exposure possible at that framerate.
 
                    The code maps our 0 - 510 ms exposure ctrl to these 2
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 45552c3ff8d..3e76951e3c1 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -607,7 +607,7 @@ static void spca500_reinit(struct gspca_dev *gspca_dev)
         reg_w(gspca_dev, 0x00, 0x8880, 2);
         /* family cam Quicksmart stuff */
         reg_w(gspca_dev, 0x00, 0x800a, 0x00);
-        /* Set agc transfer: synced inbetween frames */
+        /* Set agc transfer: synced between frames */
         reg_w(gspca_dev, 0x00, 0x820f, 0x01);
         /* Init SDRAM - needed for SDRAM access */
         reg_w(gspca_dev, 0x00, 0x870a, 0x04);
@@ -831,7 +831,7 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
                 /* familycam Quicksmart pocketDV stuff */
                 reg_w(gspca_dev, 0x00, 0x800a, 0x00);
-                /* Set agc transfer: synced inbetween frames */
+                /* Set agc transfer: synced between frames */
                 reg_w(gspca_dev, 0x00, 0x820f, 0x01);
                 /* Init SDRAM - needed for SDRAM access */
                 reg_w(gspca_dev, 0x00, 0x870a, 0x04);
diff --git a/drivers/media/video/gspca/spca508.c b/drivers/media/video/gspca/spca508.c
index 34831937152..41dce49fb43 100644
--- a/drivers/media/video/gspca/spca508.c
+++ b/drivers/media/video/gspca/spca508.c
@@ -592,7 +592,7 @@ static const u16 spca508_sightcam_init_data[][2] = {
 /* This line seems to setup the frame/canvas */
         {0x000f, 0x8402},
 
-/* Theese 6 lines are needed to startup the webcam */
+/* These 6 lines are needed to startup the webcam */
         {0x0090, 0x8110},
         {0x0001, 0x8114},
         {0x0001, 0x8114},
diff --git a/drivers/media/video/gspca/sq905.c b/drivers/media/video/gspca/sq905.c
index 2e9c0617519..5ba96aff225 100644
--- a/drivers/media/video/gspca/sq905.c
+++ b/drivers/media/video/gspca/sq905.c
@@ -22,7 +22,7 @@
  * History and Acknowledgments
  *
  * The original Linux driver for SQ905 based cameras was written by
- * Marcell Lengyel and furter developed by many other contributers
+ * Marcell Lengyel and furter developed by many other contributors
  * and is available from http://sourceforge.net/projects/sqcam/
  *
  * This driver takes advantage of the reverse engineering work done for
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 17531b41a07..b8156855f2b 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -569,7 +569,7 @@ static int hdcs_init(struct sd *sd)
         if (err < 0)
                 return err;
 
-        /* Enable continous frame capture, bit 2: stop when frame complete */
+        /* Enable continuous frame capture, bit 2: stop when frame complete */
         err = stv06xx_write_sensor(sd, HDCS_REG_CONFIG(sd), BIT(3));
         if (err < 0)
                 return err;
diff --git a/drivers/media/video/hexium_gemini.c b/drivers/media/video/hexium_gemini.c
index cdf8b191f71..cbc505a2fc2 100644
--- a/drivers/media/video/hexium_gemini.c
+++ b/drivers/media/video/hexium_gemini.c
@@ -261,7 +261,7 @@ static int vidioc_s_input(struct file *file, void *fh, unsigned int input)
 
 /* the saa7146 provides some controls (brightness, contrast, saturation)
    which gets registered *after* this function. because of this we have
-   to return with a value != 0 even if the function succeded.. */
+   to return with a value != 0 even if the function succeeded.. */
 static int vidioc_queryctrl(struct file *file, void *fh, struct v4l2_queryctrl *qc)
 {
         struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev;
diff --git a/drivers/media/video/ivtv/ivtv-firmware.c b/drivers/media/video/ivtv/ivtv-firmware.c
index 4df01947a7d..14a1cea1d70 100644
--- a/drivers/media/video/ivtv/ivtv-firmware.c
+++ b/drivers/media/video/ivtv/ivtv-firmware.c
@@ -179,7 +179,7 @@ static volatile struct ivtv_mailbox __iomem *ivtv_search_mailbox(const volatile
 {
         int i;
 
-        /* mailbox is preceeded by a 16 byte 'magic cookie' starting at a 256-byte
+        /* mailbox is preceded by a 16 byte 'magic cookie' starting at a 256-byte
            address boundary */
         for (i = 0; i < size; i += 0x100) {
                 if (readl(mem + i)      == 0x12345678 &&
@@ -377,7 +377,7 @@ int ivtv_firmware_check(struct ivtv *itv, char *where)
                           "Reloading\n", where);
                 res = ivtv_firmware_restart(itv);
                 /*
-                 * Even if restarted ok, still signal a problem had occured.
+                 * Even if restarted ok, still signal a problem had occurred.
                  * The caller can come through this function again to check
                  * if things are really ok after the restart.
                  */
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index f0316d02f09..17247451c69 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -1080,7 +1080,7 @@ static int ivtvfb_init_vidmode(struct ivtv *itv)
                 kmalloc(sizeof(u32) * 16, GFP_KERNEL|__GFP_NOWARN);
 
         if (!oi->ivtvfb_info.pseudo_palette) {
-                IVTVFB_ERR("abort, unable to alloc pseudo pallete\n");
+                IVTVFB_ERR("abort, unable to alloc pseudo palette\n");
                 return -ENOMEM;
         }
 
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index b1763ac93ab..8126622fb4f 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -69,7 +69,7 @@ MODULE_LICENSE("GPL");
 /* module parameters */
 static int opmode   = OPMODE_AUTO;
 int msp_debug;           /* msp_debug output */
-int msp_once;            /* no continous stereo monitoring */
+int msp_once;            /* no continuous stereo monitoring */
 int msp_amsound;         /* hard-wire AM sound at 6.5 Hz (france),
                             the autoscan seems work well only with FM... */
 int msp_standard = 1;    /* Override auto detect of audio msp_standard,
@@ -551,7 +551,7 @@ static int msp_log_status(struct v4l2_subdev *sd)
         switch (state->mode) {
                 case MSP_MODE_AM_DETECT: p = "AM (for carrier detect)"; break;
                 case MSP_MODE_FM_RADIO: p = "FM Radio"; break;
-                case MSP_MODE_FM_TERRA: p = "Terrestial FM-mono/stereo"; break;
+                case MSP_MODE_FM_TERRA: p = "Terrestrial FM-mono/stereo"; break;
                 case MSP_MODE_FM_SAT: p = "Satellite FM-mono"; break;
                 case MSP_MODE_FM_NICAM1: p = "NICAM/FM (B/G, D/K)"; break;
                 case MSP_MODE_FM_NICAM2: p = "NICAM/FM (I)"; break;
diff --git a/drivers/media/video/msp3400-kthreads.c b/drivers/media/video/msp3400-kthreads.c
index b376fcdee65..80387e2c3ec 100644
--- a/drivers/media/video/msp3400-kthreads.c
+++ b/drivers/media/video/msp3400-kthreads.c
@@ -87,7 +87,7 @@ static struct msp3400c_init_data_dem {
                 {-8, -8, 4, 6, 78, 107},
                 MSP_CARRIER(10.7), MSP_CARRIER(10.7),
                 0x00d0, 0x0480, 0x0020, 0x3000
-        }, {    /* Terrestial FM-mono + FM-stereo */
+        }, {    /* Terrestrial FM-mono + FM-stereo */
                 {3, 18, 27, 48, 66, 72},
                 {3, 18, 27, 48, 66, 72},
                 MSP_CARRIER(5.5), MSP_CARRIER(5.5),
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index 029a4babfd6..d4fe7bc92a1 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -473,7 +473,7 @@ static int omap_vout_vrfb_buffer_setup(struct omap_vout_device *vout,
 /*
  * Convert V4L2 rotation to DSS rotation
  *      V4L2 understand 0, 90, 180, 270.
- *      Convert to 0, 1, 2 and 3 repsectively for DSS
+ *      Convert to 0, 1, 2 and 3 respectively for DSS
  */
 static int v4l2_rot_to_dss_rot(int v4l2_rotation,
                         enum dss_rotation *rotation, bool mirror)
@@ -1142,7 +1142,7 @@ static int omap_vout_buffer_prepare(struct videobuf_queue *q,
 }
 
 /*
- * Buffer queue funtion will be called from the videobuf layer when _QBUF
+ * Buffer queue function will be called from the videobuf layer when _QBUF
  * ioctl is called. It is used to enqueue buffer, which is ready to be
  * displayed.
  */
diff --git a/drivers/media/video/omap/omap_voutlib.c b/drivers/media/video/omap/omap_voutlib.c
index b941c761eef..2aa6a76c5e5 100644
--- a/drivers/media/video/omap/omap_voutlib.c
+++ b/drivers/media/video/omap/omap_voutlib.c
@@ -53,7 +53,7 @@ EXPORT_SYMBOL_GPL(omap_vout_default_crop);
 /* Given a new render window in new_win, adjust the window to the
  * nearest supported configuration.  The adjusted window parameters are
  * returned in new_win.
- * Returns zero if succesful, or -EINVAL if the requested window is
+ * Returns zero if successful, or -EINVAL if the requested window is
  * impossible and cannot reasonably be adjusted.
  */
 int omap_vout_try_window(struct v4l2_framebuffer *fbuf,
@@ -101,7 +101,7 @@ EXPORT_SYMBOL_GPL(omap_vout_try_window);
  * will also be adjusted if necessary.  Preference is given to keeping the
  * the window as close to the requested configuration as possible.  If
  * successful, new_win, vout->win, and crop are updated.
- * Returns zero if succesful, or -EINVAL if the requested preview window is
+ * Returns zero if successful, or -EINVAL if the requested preview window is
  * impossible and cannot reasonably be adjusted.
  */
 int omap_vout_new_window(struct v4l2_rect *crop,
@@ -155,7 +155,7 @@ EXPORT_SYMBOL_GPL(omap_vout_new_window);
  * window would fall outside the display boundaries, the cropping rectangle
  * will also be adjusted to maintain the rescaling ratios.  If successful, crop
  * and win are updated.
- * Returns zero if succesful, or -EINVAL if the requested cropping rectangle is
+ * Returns zero if successful, or -EINVAL if the requested cropping rectangle is
  * impossible and cannot reasonably be adjusted.
  */
 int omap_vout_new_crop(struct v4l2_pix_format *pix,
diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c
index eab31cbd68e..5954b930663 100644
--- a/drivers/media/video/omap1_camera.c
+++ b/drivers/media/video/omap1_camera.c
@@ -687,7 +687,7 @@ static void videobuf_done(struct omap1_cam_dev *pcdev,
                  * In CONTIG mode, the current buffer parameters had already
                  * been entered into the DMA programming register set while the
                  * buffer was fetched with prepare_next_vb(), they may have also
-                 * been transfered into the runtime set and already active if
+                 * been transferred into the runtime set and already active if
                  * the DMA still running.
                  */
         } else {
@@ -835,7 +835,7 @@ static irqreturn_t cam_isr(int irq, void *data)
                                 /*
                                  * If exactly 2 sgbufs from the next sglist have
                                  * been programmed into the DMA engine (the
-                                 * frist one already transfered into the DMA
+                                 * first one already transferred into the DMA
                                  * runtime register set, the second one still
                                  * in the programming set), then we are in sync.
                                  */
diff --git a/drivers/media/video/omap3isp/isp.c b/drivers/media/video/omap3isp/isp.c
index 1a9963bd6d4..503bd7922bd 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -715,7 +715,7 @@ static int isp_pipeline_link_notify(struct media_pad *source,
  * Walk the entities chain starting at the pipeline output video node and start
  * all modules in the chain in the given mode.
  *
- * Return 0 if successfull, or the return value of the failed video::s_stream
+ * Return 0 if successful, or the return value of the failed video::s_stream
  * operation otherwise.
  */
 static int isp_pipeline_enable(struct isp_pipeline *pipe,
@@ -883,7 +883,7 @@ static int isp_pipeline_disable(struct isp_pipeline *pipe)
  * Set the pipeline to the given stream state. Pipelines can be started in
  * single-shot or continuous mode.
  *
- * Return 0 if successfull, or the return value of the failed video::s_stream
+ * Return 0 if successful, or the return value of the failed video::s_stream
  * operation otherwise.
  */
 int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe,
@@ -1283,7 +1283,7 @@ static void __isp_subclk_update(struct isp_device *isp)
                 clk |= ISPCTRL_RSZ_CLK_EN;
 
         /* NOTE: For CCDC & Preview submodules, we need to affect internal
-         *       RAM aswell.
+         *       RAM as well.
          */
         if (isp->subclk_resources & OMAP3_ISP_SUBCLK_CCDC)
                 clk |= ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN;
@@ -1431,7 +1431,7 @@ static int isp_get_clocks(struct isp_device *isp)
  * Increment the reference count on the ISP. If the first reference is taken,
  * enable clocks and power-up all submodules.
  *
- * Return a pointer to the ISP device structure, or NULL if an error occured.
+ * Return a pointer to the ISP device structure, or NULL if an error occurred.
  */
 struct isp_device *omap3isp_get(struct isp_device *isp)
 {
diff --git a/drivers/media/video/omap3isp/ispccdc.h b/drivers/media/video/omap3isp/ispccdc.h
index d403af5d31d..483a19cac1a 100644
--- a/drivers/media/video/omap3isp/ispccdc.h
+++ b/drivers/media/video/omap3isp/ispccdc.h
@@ -150,7 +150,7 @@ struct ispccdc_lsc {
  * @input: Active input
  * @output: Active outputs
  * @video_out: Output video node
- * @error: A hardware error occured during capture
+ * @error: A hardware error occurred during capture
  * @alaw: A-law compression enabled (1) or disabled (0)
  * @lpf: Low pass filter enabled (1) or disabled (0)
  * @obclamp: Optical-black clamp enabled (1) or disabled (0)
@@ -163,7 +163,7 @@ struct ispccdc_lsc {
  * @shadow_update: Controls update in progress by userspace
  * @syncif: Interface synchronization configuration
  * @vpcfg: Video port configuration
- * @underrun: A buffer underrun occured and a new buffer has been queued
+ * @underrun: A buffer underrun occurred and a new buffer has been queued
  * @state: Streaming state
  * @lock: Serializes shadow_update with interrupt handler
  * @wait: Wait queue used to stop the module
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c
index 0efef2e78d9..0e16cab8e08 100644
--- a/drivers/media/video/omap3isp/ispccp2.c
+++ b/drivers/media/video/omap3isp/ispccp2.c
@@ -772,7 +772,7 @@ static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
  * @sd    : pointer to v4l2 subdev structure
  * @fh    : V4L2 subdev file handle
  * @fmt   : pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
                               struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c
index fb503f3db3b..69161a682b3 100644
--- a/drivers/media/video/omap3isp/ispcsi2.c
+++ b/drivers/media/video/omap3isp/ispcsi2.c
@@ -969,7 +969,7 @@ static int csi2_enum_frame_size(struct v4l2_subdev *sd,
  * @sd : pointer to v4l2 subdev structure
  * @fh : V4L2 subdev file handle
  * @fmt: pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
                            struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/isppreview.c b/drivers/media/video/omap3isp/isppreview.c
index baf9374201d..2b16988a501 100644
--- a/drivers/media/video/omap3isp/isppreview.c
+++ b/drivers/media/video/omap3isp/isppreview.c
@@ -34,7 +34,7 @@
 #include "ispreg.h"
 #include "isppreview.h"
 
-/* Default values in Office Flourescent Light for RGBtoRGB Blending */
+/* Default values in Office Fluorescent Light for RGBtoRGB Blending */
 static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
         {       /* RGB-RGB Matrix */
                 {0x01E2, 0x0F30, 0x0FEE},
@@ -44,7 +44,7 @@ static struct omap3isp_prev_rgbtorgb flr_rgb2rgb = {
         {0x0000, 0x0000, 0x0000}
 };
 
-/* Default values in Office Flourescent Light for RGB to YUV Conversion*/
+/* Default values in Office Fluorescent Light for RGB to YUV Conversion*/
 static struct omap3isp_prev_csc flr_prev_csc = {
         {       /* CSC Coef Matrix */
                 {66, 129, 25},
@@ -54,22 +54,22 @@ static struct omap3isp_prev_csc flr_prev_csc = {
         {0x0, 0x0, 0x0}
 };
 
-/* Default values in Office Flourescent Light for CFA Gradient*/
+/* Default values in Office Fluorescent Light for CFA Gradient*/
 #define FLR_CFA_GRADTHRS_HORZ   0x28
 #define FLR_CFA_GRADTHRS_VERT   0x28
 
-/* Default values in Office Flourescent Light for Chroma Suppression*/
+/* Default values in Office Fluorescent Light for Chroma Suppression*/
 #define FLR_CSUP_GAIN           0x0D
 #define FLR_CSUP_THRES          0xEB
 
-/* Default values in Office Flourescent Light for Noise Filter*/
+/* Default values in Office Fluorescent Light for Noise Filter*/
 #define FLR_NF_STRGTH           0x03
 
 /* Default values for White Balance */
 #define FLR_WBAL_DGAIN          0x100
 #define FLR_WBAL_COEF           0x20
 
-/* Default values in Office Flourescent Light for Black Adjustment*/
+/* Default values in Office Fluorescent Light for Black Adjustment*/
 #define FLR_BLKADJ_BLUE         0x0
 #define FLR_BLKADJ_GREEN        0x0
 #define FLR_BLKADJ_RED          0x0
@@ -137,7 +137,7 @@ preview_enable_invalaw(struct isp_prev_device *prev, u8 enable)
  * @enable: 1 - Enable, 0 - Disable
  *
  * NOTE: PRV_WSDR_ADDR and PRV_WADD_OFFSET must be set also
- * The proccess is applied for each captured frame.
+ * The process is applied for each captured frame.
  */
 static void
 preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable)
@@ -157,7 +157,7 @@ preview_enable_drkframe_capture(struct isp_prev_device *prev, u8 enable)
  * @enable: 1 - Acquires memory bandwidth since the pixels in each frame is
  *          subtracted with the pixels in the current frame.
  *
- * The proccess is applied for each captured frame.
+ * The process is applied for each captured frame.
  */
 static void
 preview_enable_drkframe(struct isp_prev_device *prev, u8 enable)
@@ -1528,7 +1528,7 @@ static long preview_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
  * preview_set_stream - Enable/Disable streaming on preview subdev
  * @sd    : pointer to v4l2 subdev structure
  * @enable: 1 == Enable, 0 == Disable
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int preview_set_stream(struct v4l2_subdev *sd, int enable)
 {
@@ -1780,7 +1780,7 @@ static int preview_enum_frame_size(struct v4l2_subdev *sd,
  * @sd : pointer to v4l2 subdev structure
  * @fh : V4L2 subdev file handle
  * @fmt: pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int preview_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
                               struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/isppreview.h b/drivers/media/video/omap3isp/isppreview.h
index f2d63ca4bd6..fa943bd05c7 100644
--- a/drivers/media/video/omap3isp/isppreview.h
+++ b/drivers/media/video/omap3isp/isppreview.h
@@ -163,7 +163,7 @@ struct isptables_update {
  * @output: Bitmask of the active output
  * @video_in: Input video entity
  * @video_out: Output video entity
- * @error: A hardware error occured during capture
+ * @error: A hardware error occurred during capture
  * @params: Module configuration data
  * @shadow_update: If set, update the hardware configured in the next interrupt
  * @underrun: Whether the preview entity has queued buffers on the output
diff --git a/drivers/media/video/omap3isp/ispqueue.h b/drivers/media/video/omap3isp/ispqueue.h
index 251de3e1679..92c5a12157d 100644
--- a/drivers/media/video/omap3isp/ispqueue.h
+++ b/drivers/media/video/omap3isp/ispqueue.h
@@ -46,9 +46,9 @@ struct scatterlist;
  *      device yet.
  * @ISP_BUF_STATE_ACTIVE: The buffer is in use for an active video transfer.
  * @ISP_BUF_STATE_ERROR: The device is done with the buffer and an error
- *      occured. For capture device the buffer likely contains corrupted data or
+ *      occurred. For capture device the buffer likely contains corrupted data or
  *      no data at all.
- * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occured.
+ * @ISP_BUF_STATE_DONE: The device is done with the buffer and no error occurred.
  *      For capture devices the buffer contains valid data.
  */
 enum isp_video_buffer_state {
diff --git a/drivers/media/video/omap3isp/ispresizer.c b/drivers/media/video/omap3isp/ispresizer.c
index 75d39b115d4..653f88ba56d 100644
--- a/drivers/media/video/omap3isp/ispresizer.c
+++ b/drivers/media/video/omap3isp/ispresizer.c
@@ -751,7 +751,7 @@ static void resizer_print_status(struct isp_res_device *res)
  * ratio will thus result in a resizing factor slightly larger than the
  * requested value.
  *
- * To accomodate that, and make sure the TRM equations are satisfied exactly, we
+ * To accommodate that, and make sure the TRM equations are satisfied exactly, we
  * compute the input crop rectangle as the last step.
  *
  * As if the situation wasn't complex enough, the maximum output width depends
@@ -1386,7 +1386,7 @@ static int resizer_enum_frame_size(struct v4l2_subdev *sd,
  * @sd    : pointer to v4l2 subdev structure
  * @fh    : V4L2 subdev file handle
  * @fmt   : pointer to v4l2 subdev format structure
- * return -EINVAL or zero on sucess
+ * return -EINVAL or zero on success
  */
 static int resizer_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
                               struct v4l2_subdev_format *fmt)
diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c
index a0bb5db9cb8..208a7ec739d 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -494,12 +494,12 @@ static const struct isp_video_queue_operations isp_video_queue_ops = {
 /*
  * omap3isp_video_buffer_next - Complete the current buffer and return the next
  * @video: ISP video object
- * @error: Whether an error occured during capture
+ * @error: Whether an error occurred during capture
  *
  * Remove the current video buffer from the DMA queue and fill its timestamp,
  * field count and state fields before waking up its completion handler.
  *
- * The buffer state is set to VIDEOBUF_DONE if no error occured (@error is 0)
+ * The buffer state is set to VIDEOBUF_DONE if no error occurred (@error is 0)
  * or VIDEOBUF_ERROR otherwise (@error is non-zero).
  *
  * The DMA queue is expected to contain at least one buffer.
@@ -578,7 +578,7 @@ struct isp_buffer *omap3isp_video_buffer_next(struct isp_video *video,
 /*
  * omap3isp_video_resume - Perform resume operation on the buffers
  * @video: ISP video object
- * @continuous: Pipeline is in single shot mode if 0 or continous mode otherwise
+ * @continuous: Pipeline is in single shot mode if 0 or continuous mode otherwise
  *
  * This function is intended to be used on suspend/resume scenario. It
  * requests video queue layer to discard buffers marked as DONE if it's in
diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c
index fe8e3ebd9ce..456d9ad9ae5 100644
--- a/drivers/media/video/ov6650.c
+++ b/drivers/media/video/ov6650.c
@@ -1038,7 +1038,7 @@ static int ov6650_reset(struct i2c_client *client)
         ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0);
         if (ret)
                 dev_err(&client->dev,
-                        "An error occured while entering soft reset!\n");
+                        "An error occurred while entering soft reset!\n");
 
         return ret;
 }
diff --git a/drivers/media/video/ov9640.c b/drivers/media/video/ov9640.c
index 53d88a2ab92..5173ac449dd 100644
--- a/drivers/media/video/ov9640.c
+++ b/drivers/media/video/ov9640.c
@@ -273,7 +273,7 @@ static int ov9640_reset(struct i2c_client *client)
         ret = ov9640_reg_write(client, OV9640_COM7, OV9640_COM7_SCCB_RESET);
         if (ret)
                 dev_err(&client->dev,
-                        "An error occured while entering soft reset!\n");
+                        "An error occurred while entering soft reset!\n");
 
         return ret;
 }
diff --git a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c
index aeed1c2945f..9515f3a68f8 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-eeprom.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-eeprom.c
@@ -32,7 +32,7 @@
 
    Read and analyze data in the eeprom.  Use tveeprom to figure out
    the packet structure, since this is another Hauppauge device and
-   internally it has a family resemblence to ivtv-type devices
+   internally it has a family resemblance to ivtv-type devices
 
 */
 
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.h b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
index 51d3009ab57..d7753ae9ff4 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.h
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.h
@@ -75,7 +75,7 @@ enum pvr2_v4l_type {
  *  (but it might still on the bus).  In this state there's nothing we can
  *  do; it must be replugged in order to recover.
  *
- *  COLD - Device is in an unusuable state, needs microcontroller firmware.
+ *  COLD - Device is in an unusable state, needs microcontroller firmware.
  *
  *  WARM - We can communicate with the device and the proper
  *  microcontroller firmware is running, but other device initialization is
diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c
index 02686771740..c1ee09a043b 100644
--- a/drivers/media/video/pxa_camera.c
+++ b/drivers/media/video/pxa_camera.c
@@ -714,7 +714,7 @@ static void pxa_camera_wakeup(struct pxa_camera_dev *pcdev,
  *
  * The DMA chaining is done with DMA running. This means a tiny temporal window
  * remains, where a buffer is queued on the chain, while the chain is already
- * stopped. This means the tailed buffer would never be transfered by DMA.
+ * stopped. This means the tailed buffer would never be transferred by DMA.
  * This function restarts the capture for this corner case, where :
  *  - DADR() == DADDR_STOP
  *  - a videobuffer is queued on the pcdev->capture list
diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c
index 4d929a39452..4893b2d91d8 100644
--- a/drivers/media/video/s5p-fimc/fimc-reg.c
+++ b/drivers/media/video/s5p-fimc/fimc-reg.c
@@ -356,7 +356,7 @@ void fimc_hw_en_capture(struct fimc_ctx *ctx)
                 /* one shot mode */
                 cfg |= S5P_CIIMGCPT_CPT_FREN_ENABLE | S5P_CIIMGCPT_IMGCPTEN;
         } else {
-                /* Continous frame capture mode (freerun). */
+                /* Continuous frame capture mode (freerun). */
                 cfg &= ~(S5P_CIIMGCPT_CPT_FREN_ENABLE |
                          S5P_CIIMGCPT_CPT_FRMOD_CNT);
                 cfg |= S5P_CIIMGCPT_IMGCPTEN;
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 61c6007c8ea..50f1be05ebd 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -7460,7 +7460,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                                 dev->tuner_type = TUNER_PHILIPS_FM1216ME_MK3;
                                 break;
                         default:
-                                printk(KERN_ERR "%s Cant determine tuner type %x from EEPROM\n", dev->name, tuner_t);
+                                printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t);
                         }
                 } else if ((data[1] != 0) && (data[1] != 0xff)) {
                         /* new config structure */
@@ -7480,7 +7480,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
                                         printk(KERN_INFO "%s Board has DVB-T\n", dev->name);
                                 break;
                         default:
-                                printk(KERN_ERR "%s Cant determine tuner type %x from EEPROM\n", dev->name, tuner_t);
+                                printk(KERN_ERR "%s Can't determine tuner type %x from EEPROM\n", dev->name, tuner_t);
                         }
                 } else {
                         printk(KERN_ERR "%s unexpected config structure\n", dev->name);
diff --git a/drivers/media/video/saa7164/saa7164-cmd.c b/drivers/media/video/saa7164/saa7164-cmd.c
index 6a4c217ed3a..62fac7f9d04 100644
--- a/drivers/media/video/saa7164/saa7164-cmd.c
+++ b/drivers/media/video/saa7164/saa7164-cmd.c
@@ -257,7 +257,7 @@ out:
 }
 
 /* Wait for a signal event, without holding a mutex. Either return TIMEOUT if
- * the event never occured, or SAA_OK if it was signaled during the wait.
+ * the event never occurred, or SAA_OK if it was signaled during the wait.
  */
 int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno)
 {
diff --git a/drivers/media/video/saa7164/saa7164-fw.c b/drivers/media/video/saa7164/saa7164-fw.c
index b369300cce0..a266bf0169e 100644
--- a/drivers/media/video/saa7164/saa7164-fw.c
+++ b/drivers/media/video/saa7164/saa7164-fw.c
@@ -444,7 +444,7 @@ int saa7164_downloadfirmware(struct saa7164_dev *dev)
                 printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved);
                 printk(KERN_INFO " .Version = 0x%x\n", hdr->version);
 
-                /* Retreive bootloader if reqd */
+                /* Retrieve bootloader if reqd */
                 if ((hdr->firmwaresize == 0) && (hdr->bslsize == 0))
                         /* Second bootloader in the firmware file */
                         filesize = hdr->reserved * 16;
diff --git a/drivers/media/video/saa7164/saa7164-types.h b/drivers/media/video/saa7164/saa7164-types.h
index df1d2997fa6..1d2140a3eb3 100644
--- a/drivers/media/video/saa7164/saa7164-types.h
+++ b/drivers/media/video/saa7164/saa7164-types.h
@@ -412,7 +412,7 @@ struct tmComResVBIFormatDescrHeader {
         u8      StartLine; /* NTSC Start = 10 */
         u8      EndLine; /* NTSC = 21 */
         u8      FieldRate; /* 60 for NTSC */
-        u8      bNumLines; /* Unsed - scheduled for removal */
+        u8      bNumLines; /* Unused - scheduled for removal */
 } __attribute__((packed));
 
 struct tmComResProbeCommit {
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index ce56a1cdbf0..0e07c493e6f 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -1810,7 +1810,7 @@ static int sn9c102_open(struct file *filp)
                 /*
                    We will not release the "open_mutex" lock, so that only one
                    process can be in the wait queue below. This way the process
-                   will be sleeping while holding the lock, without loosing its
+                   will be sleeping while holding the lock, without losing its
                    priority after any wake_up().
                 */
                 err = wait_event_interruptible_exclusive(cam->wait_open,
diff --git a/drivers/media/video/sn9c102/sn9c102_sensor.h b/drivers/media/video/sn9c102/sn9c102_sensor.h
index 7f38549715b..3679970dba2 100644
--- a/drivers/media/video/sn9c102/sn9c102_sensor.h
+++ b/drivers/media/video/sn9c102/sn9c102_sensor.h
@@ -180,7 +180,7 @@ struct sn9c102_sensor {
            It should be used to initialize the sensor only, but may also
            configure part of the SN9C1XX chip if necessary. You don't need to
            setup picture settings like brightness, contrast, etc.. here, if
-           the corrisponding controls are implemented (see below), since
+           the corresponding controls are implemented (see below), since
            they are adjusted in the core driver by calling the set_ctrl()
            method after init(), where the arguments are the default values
            specified in the v4l2_queryctrl list of supported controls;
diff --git a/drivers/media/video/tcm825x.c b/drivers/media/video/tcm825x.c
index 54681a53582..b6ee1bd342d 100644
--- a/drivers/media/video/tcm825x.c
+++ b/drivers/media/video/tcm825x.c
@@ -493,7 +493,7 @@ static int ioctl_g_ctrl(struct v4l2_int_device *s,
         int val, r;
         struct vcontrol *lvc;
 
-        /* exposure time is special, spread accross 2 registers */
+        /* exposure time is special, spread across 2 registers */
         if (vc->id == V4L2_CID_EXPOSURE) {
                 int val_lower, val_upper;
 
@@ -538,7 +538,7 @@ static int ioctl_s_ctrl(struct v4l2_int_device *s,
         struct vcontrol *lvc;
         int val = vc->value;
 
-        /* exposure time is special, spread accross 2 registers */
+        /* exposure time is special, spread across 2 registers */
         if (vc->id == V4L2_CID_EXPOSURE) {
                 int val_lower, val_upper;
                 val_lower = val & TCM825X_MASK(TCM825X_ESRSPD_L);
diff --git a/drivers/media/video/tvaudio.c b/drivers/media/video/tvaudio.c
index a25e2b5e194..c46a3bb9585 100644
--- a/drivers/media/video/tvaudio.c
+++ b/drivers/media/video/tvaudio.c
@@ -1058,11 +1058,11 @@ static int tda9874a_initialize(struct CHIPSTATE *chip)
 #define TDA9875_MVR         0x1b  /* Main volume droite */
 #define TDA9875_MBA         0x1d  /* Main Basse */
 #define TDA9875_MTR         0x1e  /* Main treble */
-#define TDA9875_ACS         0x1f  /* Auxilary channel select (FM) 0b0000000*/
-#define TDA9875_AVL         0x20  /* Auxilary volume gauche */
-#define TDA9875_AVR         0x21  /* Auxilary volume droite */
-#define TDA9875_ABA         0x22  /* Auxilary Basse */
-#define TDA9875_ATR         0x23  /* Auxilary treble */
+#define TDA9875_ACS         0x1f  /* Auxiliary channel select (FM) 0b0000000*/
+#define TDA9875_AVL         0x20  /* Auxiliary volume gauche */
+#define TDA9875_AVR         0x21  /* Auxiliary volume droite */
+#define TDA9875_ABA         0x22  /* Auxiliary Basse */
+#define TDA9875_ATR         0x23  /* Auxiliary treble */
 
 #define TDA9875_MSR         0x02  /* Monitor select register */
 #define TDA9875_C1MSB       0x03  /* Carrier 1 (FM) frequency register MSB */
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 545c0294813..fc766b9f24c 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -394,11 +394,11 @@ int uvc_commit_video(struct uvc_streaming *stream,
  *
  * uvc_video_decode_end is called with header data at the end of a bulk or
  * isochronous payload. It performs any additional header data processing and
- * returns 0 or a negative error code if an error occured. As header data have
+ * returns 0 or a negative error code if an error occurred. As header data have
  * already been processed by uvc_video_decode_start, this functions isn't
  * required to perform sanity checks a second time.
  *
- * For isochronous transfers where a payload is always transfered in a single
+ * For isochronous transfers where a payload is always transferred in a single
  * URB, the three functions will be called in a row.
  *
  * To let the decoder process header data and update its internal state even
@@ -658,7 +658,7 @@ static void uvc_video_decode_bulk(struct urb *urb, struct uvc_streaming *stream,
                                                             buf);
                 } while (ret == -EAGAIN);
 
-                /* If an error occured skip the rest of the payload. */
+                /* If an error occurred skip the rest of the payload. */
                 if (ret < 0 || buf == NULL) {
                         stream->bulk.skip_payload = 1;
                 } else {
@@ -821,7 +821,7 @@ static int uvc_alloc_urb_buffers(struct uvc_streaming *stream,
                 return stream->urb_size / psize;
 
         /* Compute the number of packets. Bulk endpoints might transfer UVC
-         * payloads accross multiple URBs.
+         * payloads across multiple URBs.
          */
         npackets = DIV_ROUND_UP(size, psize);
         if (npackets > UVC_MAX_PACKETS)
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index a01ed39e6c1..506edcc2dde 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -48,7 +48,7 @@
                         printk(KERN_CONT "%s: " fmt, vfd->name, ## arg);\
                 } while (0)
 
-/* Zero out the end of the struct pointed to by p.  Everthing after, but
+/* Zero out the end of the struct pointed to by p.  Everything after, but
  * not including, the specified field is cleared. */
 #define CLEAR_AFTER_FIELD(p, field) \
         memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
diff --git a/drivers/media/video/vpx3220.c b/drivers/media/video/vpx3220.c
index 75301d10a83..ca372eb911d 100644
--- a/drivers/media/video/vpx3220.c
+++ b/drivers/media/video/vpx3220.c
@@ -354,7 +354,7 @@ static int vpx3220_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 
         /* Here we back up the input selection because it gets
            overwritten when we fill the registers with the
-           choosen video norm */
+           chosen video norm */
         temp_input = vpx3220_fp_read(sd, 0xf2);
 
         v4l2_dbg(1, debug, sd, "s_std %llx\n", (unsigned long long)std);
diff --git a/drivers/media/video/zoran/videocodec.h b/drivers/media/video/zoran/videocodec.h
index b654bfff874..def55585ad2 100644
--- a/drivers/media/video/zoran/videocodec.h
+++ b/drivers/media/video/zoran/videocodec.h
@@ -57,7 +57,7 @@
    therfor they may not be initialized.
 
    The other functions are just for convenience, as they are for sure used by
-   most/all of the codecs. The last ones may be ommited, too.
+   most/all of the codecs. The last ones may be omitted, too.
 
    See the structure declaration below for more information and which data has
    to be set up for the master and the slave.
diff --git a/drivers/media/video/zoran/zoran.h b/drivers/media/video/zoran/zoran.h
index 4bb368e6fd4..f3f64001492 100644
--- a/drivers/media/video/zoran/zoran.h
+++ b/drivers/media/video/zoran/zoran.h
@@ -259,7 +259,7 @@ struct card_info {
         struct vfe_polarity vfe_pol;
         u8 gpio_pol[ZR_GPIO_MAX];
 
-        /* is the /GWS line conected? */
+        /* is the /GWS line connected? */
         u8 gws_not_connected;
 
         /* avs6eyes mux setting */
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 7c3921de958..2771d818406 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1254,7 +1254,7 @@ static int setup_overlay(struct zoran_fh *fh, int on)
 {
         struct zoran *zr = fh->zr;
 
-        /* If there is nothing to do, return immediatly */
+        /* If there is nothing to do, return immediately */
         if ((on && fh->overlay_active != ZORAN_FREE) ||
             (!on && fh->overlay_active == ZORAN_FREE))
                 return 0;
diff --git a/drivers/memstick/core/mspro_block.c b/drivers/memstick/core/mspro_block.c
index 57b42bfc7d2..4a1909a32b6 100644
--- a/drivers/memstick/core/mspro_block.c
+++ b/drivers/memstick/core/mspro_block.c
@@ -973,7 +973,7 @@ try_again:
 }
 
 /* Memory allocated for attributes by this function should be freed by
- * mspro_block_data_clear, no matter if the initialization process succeded
+ * mspro_block_data_clear, no matter if the initialization process succeeded
  * or failed.
  */
 static int mspro_block_read_attributes(struct memstick_dev *card)
diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c
index 700d420a59a..668f5c6a039 100644
--- a/drivers/memstick/host/r592.c
+++ b/drivers/memstick/host/r592.c
@@ -796,7 +796,7 @@ static int r592_probe(struct pci_dev *pdev, const struct pci_device_id *id)
         if (memstick_add_host(host))
                 goto error7;
 
-        message("driver succesfully loaded");
+        message("driver successfully loaded");
         return 0;
 error7:
         free_irq(dev->irq, dev);
diff --git a/drivers/memstick/host/r592.h b/drivers/memstick/host/r592.h
index eee264e6028..c5726c1e883 100644
--- a/drivers/memstick/host/r592.h
+++ b/drivers/memstick/host/r592.h
@@ -43,12 +43,12 @@
 
                                                         /* Error detection via CRC */
 #define R592_STATUS_SEND_ERR            (1 << 24)       /* Send failed */
-#define R592_STATUS_RECV_ERR            (1 << 25)       /* Recieve failed */
+#define R592_STATUS_RECV_ERR            (1 << 25)       /* Receive failed */
 
                                                         /* Card state */
-#define R592_STATUS_RDY                 (1 << 28)       /* RDY signal recieved */
+#define R592_STATUS_RDY                 (1 << 28)       /* RDY signal received */
 #define R592_STATUS_CED                 (1 << 29)       /* INT: Command done (serial mode)*/
-#define R592_STATUS_SFIFO_INPUT         (1 << 30)       /* Small fifo recieved data*/
+#define R592_STATUS_SFIFO_INPUT         (1 << 30)       /* Small fifo received data*/
 
 #define R592_SFIFO_SIZE                 32              /* total size of small fifo is 32 bytes */
 #define R592_SFIFO_PACKET               8               /* packet size of small fifo */
diff --git a/drivers/message/fusion/lsi/mpi_log_fc.h b/drivers/message/fusion/lsi/mpi_log_fc.h
index face6e7acc7..03be8b21770 100644
--- a/drivers/message/fusion/lsi/mpi_log_fc.h
+++ b/drivers/message/fusion/lsi/mpi_log_fc.h
@@ -38,8 +38,8 @@ typedef enum _MpiIocLogInfoFc
 {
     MPI_IOCLOGINFO_FC_INIT_BASE                     = 0x20000000,
     MPI_IOCLOGINFO_FC_INIT_ERROR_OUT_OF_ORDER_FRAME = 0x20000001, /* received an out of order frame - unsupported */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primative */
-    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primative */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_START_OF_FRAME = 0x20000002, /* Bad Rx Frame, bad start of frame primitive */
+    MPI_IOCLOGINFO_FC_INIT_ERROR_BAD_END_OF_FRAME   = 0x20000003, /* Bad Rx Frame, bad end of frame primitive */
     MPI_IOCLOGINFO_FC_INIT_ERROR_OVER_RUN           = 0x20000004, /* Bad Rx Frame, overrun */
     MPI_IOCLOGINFO_FC_INIT_ERROR_RX_OTHER           = 0x20000005, /* Other errors caught by IOC which require retries */
     MPI_IOCLOGINFO_FC_INIT_ERROR_SUBPROC_DEAD       = 0x20000006, /* Main processor could not initialize sub-processor */
diff --git a/drivers/message/fusion/lsi/mpi_log_sas.h b/drivers/message/fusion/lsi/mpi_log_sas.h
index 8b04810df46..f62960b5d52 100644
--- a/drivers/message/fusion/lsi/mpi_log_sas.h
+++ b/drivers/message/fusion/lsi/mpi_log_sas.h
@@ -56,9 +56,9 @@
 #define IOP_LOGINFO_CODE_FWUPLOAD_NO_FLASH_AVAILABLE         (0x0003E000) /* Tried to upload from flash, but there is none */
 #define IOP_LOGINFO_CODE_FWUPLOAD_UNKNOWN_IMAGE_TYPE         (0x0003E001) /* ImageType field contents were invalid */
 #define IOP_LOGINFO_CODE_FWUPLOAD_WRONG_IMAGE_SIZE           (0x0003E002) /* ImageSize field in TCSGE was bad/offset in MfgPg 4 was wrong */
-#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occured while attempting to upload the entire flash */
-#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occured while attempting to upload single flash region */
-#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occured while DMAing FW to host memory */
+#define IOP_LOGINFO_CODE_FWUPLOAD_ENTIRE_FLASH_UPLOAD_FAILED (0x0003E003) /* Error occurred while attempting to upload the entire flash */
+#define IOP_LOGINFO_CODE_FWUPLOAD_REGION_UPLOAD_FAILED       (0x0003E004) /* Error occurred while attempting to upload single flash region */
+#define IOP_LOGINFO_CODE_FWUPLOAD_DMA_FAILURE                (0x0003E005) /* Problem occurred while DMAing FW to host memory */
 
 #define IOP_LOGINFO_CODE_DIAG_MSG_ERROR                      (0x00040000) /* Error handling diag msg - or'd with diag status */
 
@@ -187,8 +187,8 @@
 #define PL_LOGINFO_SUB_CODE_BREAK_ON_INCOMPLETE_BREAK_RCVD   (0x00005000)
 
 #define PL_LOGINFO_CODE_ENCL_MGMT_SMP_FRAME_FAILURE          (0x00200000) /* Can't get SMP Frame */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occured on SMP Read */
-#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occured on SMP Write */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_READ_ERROR             (0x00200010) /* Error occurred on SMP Read */
+#define PL_LOGINFO_CODE_ENCL_MGMT_SMP_WRITE_ERROR            (0x00200020) /* Error occurred on SMP Write */
 #define PL_LOGINFO_CODE_ENCL_MGMT_NOT_SUPPORTED_ON_ENCL      (0x00200040) /* Encl Mgmt services not available for this WWID */
 #define PL_LOGINFO_CODE_ENCL_MGMT_ADDR_MODE_NOT_SUPPORTED    (0x00200050) /* Address Mode not suppored */
 #define PL_LOGINFO_CODE_ENCL_MGMT_BAD_SLOT_NUM               (0x00200060) /* Invalid Slot Number in SEP Msg */
@@ -207,8 +207,8 @@
 #define PL_LOGINFO_DA_SEP_RECEIVED_NACK_FROM_SLAVE           (0x00200103) /* SEP NACK'd, it is busy */
 #define PL_LOGINFO_DA_SEP_DID_NOT_RECEIVE_ACK                (0x00200104) /* SEP didn't rcv. ACK (Last Rcvd Bit = 1) */
 #define PL_LOGINFO_DA_SEP_BAD_STATUS_HDR_CHKSUM              (0x00200105) /* SEP stopped or sent bad chksum in Hdr */
-#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transfering data */
-#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transfering sense data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_DATA                       (0x00200106) /* SEP stopped while transferring data */
+#define PL_LOGINFO_DA_SEP_STOP_ON_SENSE_DATA                 (0x00200107) /* SEP stopped while transferring sense data */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_1          (0x00200108) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_UNSUPPORTED_SCSI_STATUS_2          (0x00200109) /* SEP returned unknown scsi status */
 #define PL_LOGINFO_DA_SEP_CHKSUM_ERROR_AFTER_STOP            (0x0020010A) /* SEP returned bad chksum after STOP */
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index ec8080c9808..fa15e853d4e 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -3435,7 +3435,7 @@ SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
  *      If memory has already been allocated, the same (cached) value
  *      is returned.
  *
- *      Return 0 if successfull, or non-zero for failure
+ *      Return 0 if successful, or non-zero for failure
  **/
 int
 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
@@ -6932,7 +6932,7 @@ EXPORT_SYMBOL(mpt_halt_firmware);
  *      Message Unit Reset - instructs the IOC to reset the Reply Post and
  *      Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
  *      All posted buffers are freed, and event notification is turned off.
- *      IOC doesnt reply to any outstanding request. This will transfer IOC
+ *      IOC doesn't reply to any outstanding request. This will transfer IOC
  *      to READY state.
  **/
 int
@@ -7905,7 +7905,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
                     "Owner",                                    /* 15h */
                 "Open Transmit DMA Abort",                      /* 16h */
                 "IO Device Missing Delay Retry",                /* 17h */
-                "IO Cancelled Due to Recieve Error",            /* 18h */
+                "IO Cancelled Due to Receive Error",            /* 18h */
                 NULL,                                           /* 19h */
                 NULL,                                           /* 1Ah */
                 NULL,                                           /* 1Bh */
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 878bda0cce7..6e6e16aab9d 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -985,7 +985,7 @@ retry_wait:
         ReplyMsg = (pFWDownloadReply_t)iocp->ioctl_cmds.reply;
         iocstat = le16_to_cpu(ReplyMsg->IOCStatus) & MPI_IOCSTATUS_MASK;
         if (iocstat == MPI_IOCSTATUS_SUCCESS) {
-                printk(MYIOC_s_INFO_FMT "F/W update successfull!\n", iocp->name);
+                printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
                 return 0;
         } else if (iocstat == MPI_IOCSTATUS_INVALID_FUNCTION) {
                 printk(MYIOC_s_WARN_FMT "Hmmm...  F/W download not supported!?!\n",
@@ -2407,7 +2407,7 @@ done_free_mem:
         }
 
         /* mf is null if command issued successfully
-         * otherwise, failure occured after mf acquired.
+         * otherwise, failure occurred after mf acquired.
          */
         if (mf)
                 mpt_free_msg_frame(ioc, mf);
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index f5a14afad2c..66f94125de4 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -307,7 +307,7 @@ mptsas_requeue_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event,
         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 }
 
-/* free memory assoicated to a sas firmware event */
+/* free memory associated to a sas firmware event */
 static void
 mptsas_free_fw_event(MPT_ADAPTER *ioc, struct fw_event_work *fw_event)
 {
@@ -1094,7 +1094,7 @@ mptsas_block_io_starget(struct scsi_target *starget)
 /**
  * mptsas_target_reset_queue
  *
- * Receive request for TARGET_RESET after recieving an firmware
+ * Receive request for TARGET_RESET after receiving an firmware
  * event NOT_RESPONDING_EVENT, then put command in link list
  * and queue if task_queue already in use.
  *
@@ -1403,7 +1403,7 @@ mptsas_sas_enclosure_pg0(MPT_ADAPTER *ioc, struct mptsas_enclosure *enclosure,
 /**
  *      mptsas_add_end_device - report a new end device to sas transport layer
  *      @ioc: Pointer to MPT_ADAPTER structure
- *      @phy_info: decribes attached device
+ *      @phy_info: describes attached device
  *
  *      return (0) success (1) failure
  *
@@ -1481,7 +1481,7 @@ mptsas_add_end_device(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info)
 /**
  *      mptsas_del_end_device - report a deleted end device to sas transport layer
  *      @ioc: Pointer to MPT_ADAPTER structure
- *      @phy_info: decribes attached device
+ *      @phy_info: describes attached device
  *
  **/
 static void
diff --git a/drivers/message/i2o/README b/drivers/message/i2o/README
index 911fc3021e3..f072a8eb304 100644
--- a/drivers/message/i2o/README
+++ b/drivers/message/i2o/README
@@ -53,7 +53,7 @@ Symbios Logic (Now LSI)
 BoxHill Corporation
         Loan of initial FibreChannel disk array used for development work.
 
-European Comission
+European Commission
         Funding the work done by the University of Helsinki
 
 SysKonnect
diff --git a/drivers/message/i2o/device.c b/drivers/message/i2o/device.c
index 0ee4264f5db..4547db99f7d 100644
--- a/drivers/message/i2o/device.c
+++ b/drivers/message/i2o/device.c
@@ -65,7 +65,7 @@ int i2o_device_claim(struct i2o_device *dev)
 
         rc = i2o_device_issue_claim(dev, I2O_CMD_UTIL_CLAIM, I2O_CLAIM_PRIMARY);
         if (!rc)
-                pr_debug("i2o: claim of device %d succeded\n",
+                pr_debug("i2o: claim of device %d succeeded\n",
                          dev->lct_data.tid);
         else
                 pr_debug("i2o: claim of device %d failed %d\n",
@@ -110,7 +110,7 @@ int i2o_device_claim_release(struct i2o_device *dev)
         }
 
         if (!rc)
-                pr_debug("i2o: claim release of device %d succeded\n",
+                pr_debug("i2o: claim release of device %d succeeded\n",
                          dev->lct_data.tid);
         else
                 pr_debug("i2o: claim release of device %d failed %d\n",
@@ -248,7 +248,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
                         goto unreg_dev;
         }
 
-        /* create user entries refering to this device */
+        /* create user entries referring to this device */
         list_for_each_entry(tmp, &c->devices, list)
             if ((tmp->lct_data.user_tid == i2o_dev->lct_data.tid)
                 && (tmp != i2o_dev)) {
@@ -267,7 +267,7 @@ static int i2o_device_add(struct i2o_controller *c, i2o_lct_entry *entry)
                         goto rmlink1;
         }
 
-        /* create parent entries refering to this device */
+        /* create parent entries referring to this device */
         list_for_each_entry(tmp, &c->devices, list)
             if ((tmp->lct_data.parent_tid == i2o_dev->lct_data.tid)
                 && (tmp != i2o_dev)) {
diff --git a/drivers/message/i2o/i2o_block.c b/drivers/message/i2o/i2o_block.c
index 47ec5bc0ed2..643ad52e3ca 100644
--- a/drivers/message/i2o/i2o_block.c
+++ b/drivers/message/i2o/i2o_block.c
@@ -610,7 +610,7 @@ static int i2o_block_release(struct gendisk *disk, fmode_t mode)
 
         /*
          * This is to deail with the case of an application
-         * opening a device and then the device dissapears while
+         * opening a device and then the device disappears while
          * it's in use, and then the application tries to release
          * it.  ex: Unmounting a deleted RAID volume at reboot.
          * If we send messages, it will just cause FAILs since
@@ -717,7 +717,7 @@ static unsigned int i2o_block_check_events(struct gendisk *disk,
 
 /**
  *      i2o_block_transfer - Transfer a request to/from the I2O controller
- *      @req: the request which should be transfered
+ *      @req: the request which should be transferred
  *
  *      This function converts the request into a I2O message. The necessary
  *      DMA buffers are allocated and after everything is setup post the message
diff --git a/drivers/message/i2o/i2o_block.h b/drivers/message/i2o/i2o_block.h
index 67f921b4419..cf8873cbca3 100644
--- a/drivers/message/i2o/i2o_block.h
+++ b/drivers/message/i2o/i2o_block.h
@@ -73,7 +73,7 @@ struct i2o_block_device {
         struct i2o_device *i2o_dev;     /* pointer to I2O device */
         struct gendisk *gd;
         spinlock_t lock;        /* queue lock */
-        struct list_head open_queue;    /* list of transfered, but unfinished
+        struct list_head open_queue;    /* list of transferred, but unfinished
                                            requests */
         unsigned int open_queue_depth;  /* number of requests in the queue */
 
diff --git a/drivers/message/i2o/i2o_scsi.c b/drivers/message/i2o/i2o_scsi.c
index 97bdf82ec90..f003957e8e1 100644
--- a/drivers/message/i2o/i2o_scsi.c
+++ b/drivers/message/i2o/i2o_scsi.c
@@ -204,7 +204,7 @@ static int i2o_scsi_remove(struct device *dev)
  *      i2o_scsi_probe - verify if dev is a I2O SCSI device and install it
  *      @dev: device to verify if it is a I2O SCSI device
  *
- *      Retrieve channel, id and lun for I2O device. If everthing goes well
+ *      Retrieve channel, id and lun for I2O device. If everything goes well
  *      register the I2O device as SCSI device on the I2O SCSI controller.
  *
  *      Returns 0 on success or negative error code on failure.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index e2fea580585..3ed3ff06be5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -201,7 +201,7 @@ config TWL4030_POWER
           as clock request handshaking.
 
           This driver uses board-specific data to initialize the resources
-          and load scripts controling which resources are switched off/on
+          and load scripts controlling which resources are switched off/on
           or reset when a sleep, wakeup or warm reset event occurs.
 
 config TWL4030_CODEC
diff --git a/drivers/mfd/ab8500-gpadc.c b/drivers/mfd/ab8500-gpadc.c
index bc93b2e8230..6421ad1160d 100644
--- a/drivers/mfd/ab8500-gpadc.c
+++ b/drivers/mfd/ab8500-gpadc.c
@@ -314,7 +314,7 @@ int ab8500_gpadc_convert(struct ab8500_gpadc *gpadc, u8 input)
         /* wait for completion of conversion */
         if (!wait_for_completion_timeout(&gpadc->ab8500_gpadc_complete, 2*HZ)) {
                 dev_err(gpadc->dev,
-                        "timeout: didnt recieve GPADC conversion interrupt\n");
+                        "timeout: didn't receive GPADC conversion interrupt\n");
                 ret = -EINVAL;
                 goto out;
         }
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
index f2f4029e21a..43a76c41cfc 100644
--- a/drivers/mfd/ezx-pcap.c
+++ b/drivers/mfd/ezx-pcap.c
@@ -185,7 +185,7 @@ static void pcap_isr_work(struct work_struct *work)
                 ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
                 ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
 
-                /* We cant service/ack irqs that are assigned to port 2 */
+                /* We can't service/ack irqs that are assigned to port 2 */
                 if (!(pdata->config & PCAP_SECOND_PORT)) {
                         ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
                         isr &= ~int_sel;
@@ -457,7 +457,7 @@ static int __devinit ezx_pcap_probe(struct spi_device *spi)
         pcap->workqueue = create_singlethread_workqueue("pcapd");
         if (!pcap->workqueue) {
                 ret = -ENOMEM;
-                dev_err(&spi->dev, "cant create pcap thread\n");
+                dev_err(&spi->dev, "can't create pcap thread\n");
                 goto free_pcap;
         }
 
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index cb01209754e..53450f433f1 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -332,7 +332,7 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
         int                             i;
 
         if (!pdata) {
-                dev_err(dev, "Missing platfrom data\n");
+                dev_err(dev, "Missing platform data\n");
                 ret = -ENOMEM;
                 goto end_probe;
         }
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index c7687f6a78a..57868416c76 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -51,7 +51,7 @@ static int __pcf50633_write(struct pcf50633 *pcf, u8 reg, int num, u8 *data)
 
 }
 
-/* Read a block of upto 32 regs  */
+/* Read a block of up to 32 regs  */
 int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
                                         int nr_regs, u8 *data)
 {
@@ -65,7 +65,7 @@ int pcf50633_read_block(struct pcf50633 *pcf, u8 reg,
 }
 EXPORT_SYMBOL_GPL(pcf50633_read_block);
 
-/* Write a block of upto 32 regs  */
+/* Write a block of up to 32 regs  */
 int pcf50633_write_block(struct pcf50633 *pcf , u8 reg,
                                         int nr_regs, u8 *data)
 {
diff --git a/drivers/mfd/twl6030-irq.c b/drivers/mfd/twl6030-irq.c
index fa937052fba..dfbae34e180 100644
--- a/drivers/mfd/twl6030-irq.c
+++ b/drivers/mfd/twl6030-irq.c
@@ -229,7 +229,7 @@ int twl6030_mmc_card_detect_config(void)
         twl6030_interrupt_unmask(TWL6030_MMCDETECT_INT_MASK,
                                                 REG_INT_MSK_STS_B);
         /*
-         * Intially Configuring MMC_CTRL for receving interrupts &
+         * Initially Configuring MMC_CTRL for receiving interrupts &
          * Card status on TWL6030 for MMC1
          */
         ret = twl_i2c_read_u8(TWL6030_MODULE_ID0, &reg_val, TWL6030_MMCCTRL);
@@ -275,7 +275,7 @@ int twl6030_mmc_card_detect(struct device *dev, int slot)
                 /* TWL6030 provide's Card detect support for
                  * only MMC1 controller.
                  */
-                pr_err("Unkown MMC controller %d in %s\n", pdev->id, __func__);
+                pr_err("Unknown MMC controller %d in %s\n", pdev->id, __func__);
                 return ret;
         }
         /*
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index d73f84ba0f0..daf69527ed8 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -8,7 +8,7 @@
  *  Copyright:  MontaVista Software, Inc.
  *
  * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
- * If something doesnt work and it worked before spliting, e-mail me,
+ * If something doesn't work and it worked before spliting, e-mail me,
  * dont bother Nicolas please ;-)
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/drivers/misc/bmp085.c b/drivers/misc/bmp085.c
index ecd276ad6b1..5f898cb706a 100644
--- a/drivers/misc/bmp085.c
+++ b/drivers/misc/bmp085.c
@@ -2,7 +2,7 @@
 
     This driver supports the bmp085 digital barometric pressure
     and temperature sensor from Bosch Sensortec. The datasheet
-    is avaliable from their website:
+    is available from their website:
     http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf
 
     A pressure measurement is issued by reading from pressure0_input.
@@ -429,7 +429,7 @@ static int __devinit bmp085_probe(struct i2c_client *client,
         if (err)
                 goto exit_free;
 
-        dev_info(&data->client->dev, "Succesfully initialized bmp085!\n");
+        dev_info(&data->client->dev, "Successfully initialized bmp085!\n");
         goto exit;
 
 exit_free:
diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c
index 338dcc12150..778fc3fdfb9 100644
--- a/drivers/misc/c2port/c2port-duramar2150.c
+++ b/drivers/misc/c2port/c2port-duramar2150.c
@@ -41,7 +41,7 @@ static void duramar2150_c2port_access(struct c2port_device *dev, int status)
                 outb(v | (C2D | C2CK), DIR_PORT);
         else
                 /* When access is "off" is important that both lines are set
-                 * as inputs or hi-impedence */
+                 * as inputs or hi-impedance */
                 outb(v & ~(C2D | C2CK), DIR_PORT);
 
         mutex_unlock(&update_lock);
diff --git a/drivers/misc/ibmasm/remote.h b/drivers/misc/ibmasm/remote.h
index 72acf5af7a2..00dbf1d4373 100644
--- a/drivers/misc/ibmasm/remote.h
+++ b/drivers/misc/ibmasm/remote.h
@@ -20,7 +20,7 @@
  *
  * Author: Max Asböck <amax@us.ibm.com>
  *
- * Orignally written by Pete Reynolds
+ * Originally written by Pete Reynolds
  */
 
 #ifndef _IBMASM_REMOTE_H_
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
index 727af07f1fb..b1f4563be9a 100644
--- a/drivers/misc/iwmc3200top/main.c
+++ b/drivers/misc/iwmc3200top/main.c
@@ -268,7 +268,7 @@ static void iwmct_irq_read_worker(struct work_struct *ws)
                 LOG_INFO(priv, IRQ, "ACK barker arrived "
                                 "- starting FW download\n");
         } else { /* REBOOT barker */
-                LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker);
+                LOG_INFO(priv, IRQ, "Received reboot barker: %x\n", barker);
                 priv->barker = barker;
 
                 if (barker & BARKER_DNLOAD_SYNC_MSK) {
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index 27dc463097f..74f16f167b8 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -645,7 +645,7 @@ static int validate_simple_test(char *put_str)
 
         while (*chk_str != '\0' && *put_str != '\0') {
                 /* If someone does a * to match the rest of the string, allow
-                 * it, or stop if the recieved string is complete.
+                 * it, or stop if the received string is complete.
                  */
                 if (*put_str == '#' || *chk_str == '*')
                         return 0;
diff --git a/drivers/misc/sgi-gru/grukservices.c b/drivers/misc/sgi-gru/grukservices.c
index 34749ee88df..9e9bddaa95a 100644
--- a/drivers/misc/sgi-gru/grukservices.c
+++ b/drivers/misc/sgi-gru/grukservices.c
@@ -229,7 +229,7 @@ again:
         bid = blade_id < 0 ? uv_numa_blade_id() : blade_id;
         bs = gru_base[bid];
 
-        /* Handle the case where migration occured while waiting for the sema */
+        /* Handle the case where migration occurred while waiting for the sema */
         down_read(&bs->bs_kgts_sema);
         if (blade_id < 0 && bid != uv_numa_blade_id()) {
                 up_read(&bs->bs_kgts_sema);
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 7a8b9068ea0..5c3ce245967 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -379,7 +379,7 @@ struct gru_thread_state {
                                                    required for contest */
         char                    ts_cch_req_slice;/* CCH packet slice */
         char                    ts_blade;       /* If >= 0, migrate context if
-                                                   ref from diferent blade */
+                                                   ref from different blade */
         char                    ts_force_cch_reload;
         char                    ts_cbr_idx[GRU_CBR_AU];/* CBR numbers of each
                                                           allocated CB */
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index 9ee4c788aa6..b4488c8f6b2 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -649,7 +649,7 @@ static int kim_probe(struct platform_device *pdev)
                 /* multiple devices could exist */
                 st_kim_devices[pdev->id] = pdev;
         } else {
-                /* platform's sure about existance of 1 device */
+                /* platform's sure about existence of 1 device */
                 st_kim_devices[0] = pdev;
         }
 
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index f5cedeccad4..abc1a63bcc5 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -292,7 +292,7 @@ static void mmc_test_free_mem(struct mmc_test_mem *mem)
 }
 
 /*
- * Allocate a lot of memory, preferrably max_sz but at least min_sz.  In case
+ * Allocate a lot of memory, preferably max_sz but at least min_sz.  In case
  * there isn't much memory do not exceed 1/16th total lowmem pages.  Also do
  * not exceed a maximum number of segments and try not to make segments much
  * bigger than maximum segment size.
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 14e95f39a7b..772d0d0a541 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -538,7 +538,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
 
         /*
          * If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF
-         * bit.  This bit will be lost everytime after a reset or power off.
+         * bit.  This bit will be lost every time after a reset or power off.
          */
         if (card->ext_csd.enhanced_area_en) {
                 err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 60842f878de..f3b22bf89cc 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -105,7 +105,7 @@ int mmc_go_idle(struct mmc_host *host)
          * that in case of hardware that won't pull up DAT3/nCS otherwise.
          *
          * SPI hosts ignore ios.chip_select; it's managed according to
-         * rules that must accomodate non-MMC slaves which this layer
+         * rules that must accommodate non-MMC slaves which this layer
          * won't even know about.
          */
         if (!mmc_host_is_spi(host)) {
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index bb192f90e8e..b3001617e67 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -45,7 +45,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
                         struct sdio_func *func = card->sdio_func[i - 1];
                         if (!func) {
                                 printk(KERN_WARNING "%s: pending IRQ for "
-                                        "non-existant function\n",
+                                        "non-existent function\n",
                                         mmc_card_id(card));
                                 ret = -EINVAL;
                         } else if (func->irq_handler) {
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 80bc9a5c25c..ea3888b65d5 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -127,7 +127,7 @@ struct atmel_mci_dma {
  * EVENT_DATA_COMPLETE is set in @pending_events, all data-related
  * interrupts must be disabled and @data_status updated with a
  * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the
- * CMDRDY interupt must be disabled and @cmd_status updated with a
+ * CMDRDY interrupt must be disabled and @cmd_status updated with a
  * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the
  * bytes_xfered field of @data must be written. This is ensured by
  * using barriers.
@@ -1082,7 +1082,7 @@ static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq)
         /*
          * Update the MMC clock rate if necessary. This may be
          * necessary if set_ios() is called when a different slot is
-         * busy transfering data.
+         * busy transferring data.
          */
         if (host->need_clock_update) {
                 mci_writel(host, MR, host->mode_reg);
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 2f7fc0c5146..7c1e16aaf17 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -99,7 +99,7 @@
 #define r1b_timeout             (HZ * 3)
 
 /* One of the critical speed parameters is the amount of data which may
- * be transfered in one command. If this value is too low, the SD card
+ * be transferred in one command. If this value is too low, the SD card
  * controller has to do multiple partial block writes (argggh!). With
  * today (2008) SD cards there is little speed gain if we transfer more
  * than 64 KBytes at a time. So use this value until there is any indication
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 1ccd4b256ce..a04f87d7ee3 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -874,7 +874,7 @@ static void finalize_request(struct s3cmci_host *host)
         if (!mrq->data)
                 goto request_done;
 
-        /* Calulate the amout of bytes transfer if there was no error */
+        /* Calculate the amout of bytes transfer if there was no error */
         if (mrq->data->error == 0) {
                 mrq->data->bytes_xfered =
                         (mrq->data->blocks * mrq->data->blksz);
@@ -882,7 +882,7 @@ static void finalize_request(struct s3cmci_host *host)
                 mrq->data->bytes_xfered = 0;
         }
 
-        /* If we had an error while transfering data we flush the
+        /* If we had an error while transferring data we flush the
          * DMA channel and the fifo to clear out any garbage. */
         if (mrq->data->error != 0) {
                 if (s3cmci_host_usedma(host))
@@ -980,7 +980,7 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
 
         if ((data->blksz & 3) != 0) {
                 /* We cannot deal with unaligned blocks with more than
-                 * one block being transfered. */
+                 * one block being transferred. */
 
                 if (data->blocks > 1) {
                         pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index 6ae8d2f00ec..62d37de6de7 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -355,7 +355,7 @@ static int tmio_mmc_start_command(struct tmio_mmc_host *host, struct mmc_command
 /*
  * This chip always returns (at least?) as much data as you ask for.
  * I'm unsure what happens if you ask for less than a block. This should be
- * looked into to ensure that a funny length read doesnt hose the controller.
+ * looked into to ensure that a funny length read doesn't hose the controller.
  */
 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host)
 {
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 7fca0a386ba..62e5a4d171e 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -484,7 +484,7 @@ static void wbsd_fill_fifo(struct wbsd_host *host)
 
         /*
          * Check that we aren't being called after the
-         * entire buffer has been transfered.
+         * entire buffer has been transferred.
          */
         if (host->num_sg == 0)
                 return;
@@ -828,7 +828,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
         /*
          * If this is a data transfer the request
          * will be finished after the data has
-         * transfered.
+         * transferred.
          */
         if (cmd->data && !cmd->error) {
                 /*
@@ -904,7 +904,7 @@ static void wbsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                         setup &= ~WBSD_DAT3_H;
 
                         /*
-                         * We cannot resume card detection immediatly
+                         * We cannot resume card detection immediately
                          * because of capacitance and delays in the chip.
                          */
                         mod_timer(&host->ignore_timer, jiffies + HZ / 100);
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
index 35c6a23b183..b1e3c26edd6 100644
--- a/drivers/mtd/chips/Kconfig
+++ b/drivers/mtd/chips/Kconfig
@@ -19,7 +19,7 @@ config MTD_JEDECPROBE
         help
           This option enables JEDEC-style probing of flash chips which are not
           compatible with the Common Flash Interface, but will use the common
-          CFI-targetted flash drivers for any chips which are identified which
+          CFI-targeted flash drivers for any chips which are identified which
           are in fact compatible in all but the probe method. This actually
           covers most AMD/Fujitsu-compatible chips and also non-CFI
           Intel chips.
diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c
index 092aef11120..09cb7c8d93b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0001.c
+++ b/drivers/mtd/chips/cfi_cmdset_0001.c
@@ -1247,12 +1247,12 @@ static int inval_cache_and_wait_for_operation(
                         break;
 
                 if (chip->erase_suspended && chip_state == FL_ERASING)  {
-                        /* Erase suspend occured while sleep: reset timeout */
+                        /* Erase suspend occurred while sleep: reset timeout */
                         timeo = reset_timeo;
                         chip->erase_suspended = 0;
                 }
                 if (chip->write_suspended && chip_state == FL_WRITING)  {
-                        /* Write suspend occured while sleep: reset timeout */
+                        /* Write suspend occurred while sleep: reset timeout */
                         timeo = reset_timeo;
                         chip->write_suspended = 0;
                 }
diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
index f9a5331e944..0b49266840b 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -263,7 +263,7 @@ static void fixup_old_sst_eraseregion(struct mtd_info *mtd)
         struct cfi_private *cfi = map->fldrv_priv;
 
         /*
-         * These flashes report two seperate eraseblock regions based on the
+         * These flashes report two separate eraseblock regions based on the
          * sector_erase-size and block_erase-size, although they both operate on the
          * same memory. This is not allowed according to CFI, so we just pick the
          * sector_erase-size.
@@ -611,8 +611,8 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd)
  *
  * Note that anything more complicated than checking if no bits are toggling
  * (including checking DQ5 for an error status) is tricky to get working
- * correctly and is therefore not done  (particulary with interleaved chips
- * as each chip must be checked independantly of the others).
+ * correctly and is therefore not done  (particularly with interleaved chips
+ * as each chip must be checked independently of the others).
  */
 static int __xipram chip_ready(struct map_info *map, unsigned long addr)
 {
@@ -635,8 +635,8 @@ static int __xipram chip_ready(struct map_info *map, unsigned long addr)
  *
  * Note that anything more complicated than checking if no bits are toggling
  * (including checking DQ5 for an error status) is tricky to get working
- * correctly and is therefore not done  (particulary with interleaved chips
- * as each chip must be checked independantly of the others).
+ * correctly and is therefore not done  (particularly with interleaved chips
+ * as each chip must be checked independently of the others).
  *
  */
 static int __xipram chip_good(struct map_info *map, unsigned long addr, map_word expected)
diff --git a/drivers/mtd/chips/cfi_util.c b/drivers/mtd/chips/cfi_util.c
index 6ae3d111e1e..8e464054a63 100644
--- a/drivers/mtd/chips/cfi_util.c
+++ b/drivers/mtd/chips/cfi_util.c
@@ -1,6 +1,6 @@
 /*
  * Common Flash Interface support:
- *   Generic utility functions not dependant on command set
+ *   Generic utility functions not dependent on command set
  *
  * Copyright (C) 2002 Red Hat
  * Copyright (C) 2003 STMicroelectronics Limited
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 4e1be51cc12..ea832ea0e4a 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -2075,7 +2075,7 @@ static inline int jedec_match( uint32_t base,
         }
 
         /*
-         * Make sure the ID's dissappear when the device is taken out of
+         * Make sure the ID's disappear when the device is taken out of
          * ID mode.  The only time this should fail when it should succeed
          * is when the ID's are written as data to the same
          * addresses.  For this rare and unfortunate case the chip
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index f29a6f9df6e..97183c8c9e3 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -295,7 +295,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
         dev->mtd.owner = THIS_MODULE;
 
         if (add_mtd_device(&dev->mtd)) {
-                /* Device didnt get added, so free the entry */
+                /* Device didn't get added, so free the entry */
                 goto devinit_err;
         }
         list_add(&dev->list, &blkmtd_device_list);
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 719b2915dc3..8b36fa77a19 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -90,7 +90,7 @@ static inline int DoC_WaitReady(void __iomem * docptr)
         return ret;
 }
 
-/* For some reason the Millennium Plus seems to occassionally put itself
+/* For some reason the Millennium Plus seems to occasionally put itself
  * into reset mode. For me this happens randomly, with no pattern that I
  * can detect. M-systems suggest always check this on any block level
  * operation and setting to normal mode if in reset mode.
diff --git a/drivers/mtd/devices/docecc.c b/drivers/mtd/devices/docecc.c
index a99838bb2dc..37ef29a73ee 100644
--- a/drivers/mtd/devices/docecc.c
+++ b/drivers/mtd/devices/docecc.c
@@ -109,7 +109,7 @@ for(ci=(n)-1;ci >=0;ci--)\
    of the integer "alpha_to[i]" with a(0) being the LSB and a(m-1) the MSB. Thus for
    example the polynomial representation of @^5 would be given by the binary
    representation of the integer "alpha_to[5]".
-                   Similarily, index_of[] can be used as follows:
+                   Similarly, index_of[] can be used as follows:
         As above, let @ represent the primitive element of GF(2^m) that is
    the root of the primitive polynomial p(x). In order to find the power
    of @ (alpha) that has the polynomial representation
@@ -121,7 +121,7 @@ for(ci=(n)-1;ci >=0;ci--)\
    NOTE:
         The element alpha_to[2^m-1] = 0 always signifying that the
    representation of "@^infinity" = 0 is (0,0,0,...,0).
-        Similarily, the element index_of[0] = A0 always signifying
+        Similarly, the element index_of[0] = A0 always signifying
    that the power of alpha which has the polynomial representation
    (0,0,...,0) is "infinity".
 
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index caf604167f0..4b829f97d56 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -353,7 +353,7 @@ static inline int erase_block (__u32 offset)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the erase successfull? */
+   /* was the erase successful? */
    if ((status & STATUS_ERASE_ERR))
          {
                 printk (KERN_WARNING "%s: erase error at address 0x%.8x.\n",module_name,offset);
@@ -508,7 +508,7 @@ static inline int write_dword (__u32 offset,__u32 x)
    /* put the flash back into command mode */
    write32 (DATA_TO_FLASH (READ_ARRAY),offset);
 
-   /* was the write successfull? */
+   /* was the write successful? */
    if ((status & STATUS_PGM_ERR) || read32 (offset) != x)
          {
                 printk (KERN_WARNING "%s: write error at address 0x%.8x.\n",module_name,offset);
diff --git a/drivers/mtd/devices/pmc551.c b/drivers/mtd/devices/pmc551.c
index ef0aba0ce58..41b8cdcc64c 100644
--- a/drivers/mtd/devices/pmc551.c
+++ b/drivers/mtd/devices/pmc551.c
@@ -351,7 +351,7 @@ static int pmc551_write(struct mtd_info *mtd, loff_t to, size_t len,
  * Fixup routines for the V370PDC
  * PCI device ID 0x020011b0
  *
- * This function basicly kick starts the DRAM oboard the card and gets it
+ * This function basically kick starts the DRAM oboard the card and gets it
  * ready to be used.  Before this is done the device reads VERY erratic, so
  * much that it can crash the Linux 2.2.x series kernels when a user cat's
  * /proc/pci .. though that is mainly a kernel bug in handling the PCI DEVSEL
@@ -540,7 +540,7 @@ static u32 fixup_pmc551(struct pci_dev *dev)
 
         /*
          * Check to make certain the DEVSEL is set correctly, this device
-         * has a tendancy to assert DEVSEL and TRDY when a write is performed
+         * has a tendency to assert DEVSEL and TRDY when a write is performed
          * to the memory when memory is read-only
          */
         if ((cmd & PCI_STATUS_DEVSEL_MASK) != 0x0) {
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index 04fdfcca93f..12679925b42 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -3,7 +3,7 @@
  * erase, lock/unlock support for LPDDR flash memories
  * (C) 2008 Korolev Alexey <akorolev@infradead.org>
  * (C) 2008 Vasiliy Leonenko <vasiliy.leonenko@gmail.com>
- * Many thanks to Roman Borisov for intial enabling
+ * Many thanks to Roman Borisov for initial enabling
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -171,7 +171,7 @@ static int wait_for_ready(struct map_info *map, struct flchip *chip,
                         mutex_lock(&chip->mutex);
                 }
                 if (chip->erase_suspended || chip->write_suspended)  {
-                        /* Suspend has occured while sleep: reset timeout */
+                        /* Suspend has occurred while sleep: reset timeout */
                         timeo = reset_timeo;
                         chip->erase_suspended = chip->write_suspended = 0;
                 }
diff --git a/drivers/mtd/maps/ceiva.c b/drivers/mtd/maps/ceiva.c
index e5f645b775a..23f551dc8ca 100644
--- a/drivers/mtd/maps/ceiva.c
+++ b/drivers/mtd/maps/ceiva.c
@@ -42,7 +42,7 @@
  *
  * Please note:
  *  1. The flash size given should be the largest flash size that can
- *     be accomodated.
+ *     be accommodated.
  *
  *  2. The bus width must defined in clps_setup_flash.
  *
@@ -58,7 +58,7 @@
 #define BOOT_PARTITION_SIZE_KiB       (16)
 #define PARAMS_PARTITION_SIZE_KiB     (8)
 #define KERNEL_PARTITION_SIZE_KiB     (4*128)
-/* Use both remaing portion of first flash, and all of second flash */
+/* Use both remaining portion of first flash, and all of second flash */
 #define ROOT_PARTITION_SIZE_KiB       (3*128) + (8*128)
 
 static struct mtd_partition ceiva_partitions[] = {
diff --git a/drivers/mtd/maps/cfi_flagadm.c b/drivers/mtd/maps/cfi_flagadm.c
index b4ed8161191..f71343cd77c 100644
--- a/drivers/mtd/maps/cfi_flagadm.c
+++ b/drivers/mtd/maps/cfi_flagadm.c
@@ -33,7 +33,7 @@
 
 
 /* We split the flash chip up into four parts.
- * 1: bootloader firts 128k                     (0x00000000 - 0x0001FFFF) size 0x020000
+ * 1: bootloader first 128k                     (0x00000000 - 0x0001FFFF) size 0x020000
  * 2: kernel 640k                                       (0x00020000 - 0x000BFFFF) size 0x0A0000
  * 3: compressed 1536k root ramdisk     (0x000C0000 - 0x0023FFFF) size 0x180000
  * 4: writeable diskpartition (jffs)(0x00240000 - 0x003FFFFF) size 0x1C0000
diff --git a/drivers/mtd/maps/pcmciamtd.c b/drivers/mtd/maps/pcmciamtd.c
index 91702294839..6799e75d74e 100644
--- a/drivers/mtd/maps/pcmciamtd.c
+++ b/drivers/mtd/maps/pcmciamtd.c
@@ -497,7 +497,7 @@ static int pcmciamtd_config(struct pcmcia_device *link)
                 dev->pcmcia_map.set_vpp = pcmciamtd_set_vpp;
 
         /* Request a memory window for PCMCIA. Some architeures can map windows
-         * upto the maximum that PCMCIA can support (64MiB) - this is ideal and
+         * up to the maximum that PCMCIA can support (64MiB) - this is ideal and
          * we aim for a window the size of the whole card - otherwise we try
          * smaller windows until we succeed
          */
diff --git a/drivers/mtd/maps/pmcmsp-flash.c b/drivers/mtd/maps/pmcmsp-flash.c
index acb13fa5001..64aea6acd48 100644
--- a/drivers/mtd/maps/pmcmsp-flash.c
+++ b/drivers/mtd/maps/pmcmsp-flash.c
@@ -3,7 +3,7 @@
  * Config with both CFI and JEDEC device support.
  *
  * Basically physmap.c with the addition of partitions and
- * an array of mapping info to accomodate more than one flash type per board.
+ * an array of mapping info to accommodate more than one flash type per board.
  *
  * Copyright 2005-2007 PMC-Sierra, Inc.
  *
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
index 85c1e56309e..4d8aaaf4bb7 100644
--- a/drivers/mtd/maps/sc520cdp.c
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -197,7 +197,7 @@ static void sc520cdp_setup_par(void)
         }
 
         /*
-        ** Find the PARxx registers that are reponsible for activating
+        ** Find the PARxx registers that are responsible for activating
         ** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a
         ** new value from the table.
         */
diff --git a/drivers/mtd/maps/tqm8xxl.c b/drivers/mtd/maps/tqm8xxl.c
index c08e140d40e..0718dfb3ee6 100644
--- a/drivers/mtd/maps/tqm8xxl.c
+++ b/drivers/mtd/maps/tqm8xxl.c
@@ -63,7 +63,7 @@ static void __iomem *start_scan_addr;
  */
 
 #ifdef CONFIG_MTD_PARTITIONS
-/* Currently, TQM8xxL has upto 8MiB flash */
+/* Currently, TQM8xxL has up to 8MiB flash */
 static unsigned long tqm8xxl_max_flash_size = 0x00800000;
 
 /* partition definition for first flash bank
diff --git a/drivers/mtd/mtdblock.c b/drivers/mtd/mtdblock.c
index 1e74ad96104..3326615ad66 100644
--- a/drivers/mtd/mtdblock.c
+++ b/drivers/mtd/mtdblock.c
@@ -129,7 +129,7 @@ static int write_cached_data (struct mtdblk_dev *mtdblk)
                 return ret;
 
         /*
-         * Here we could argubly set the cache state to STATE_CLEAN.
+         * Here we could arguably set the cache state to STATE_CLEAN.
          * However this could lead to inconsistency since we will not
          * be notified if this content is altered on the flash by other
          * means.  Let's declare it empty and leave buffering tasks to
diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c
index 145b3d0dc0d..4c36ef66a46 100644
--- a/drivers/mtd/mtdchar.c
+++ b/drivers/mtd/mtdchar.c
@@ -234,7 +234,7 @@ static ssize_t mtd_read(struct file *file, char __user *buf, size_t count,loff_t
                  * the data. For our userspace tools it is important
                  * to dump areas with ecc errors !
                  * For kernel internal usage it also might return -EUCLEAN
-                 * to signal the caller that a bitflip has occured and has
+                 * to signal the caller that a bitflip has occurred and has
                  * been corrected by the ECC algorithm.
                  * Userspace software which accesses NAND this way
                  * must be aware of the fact that it deals with NAND
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index a92054e945e..edec457d361 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -239,7 +239,7 @@ config MTD_NAND_BCM_UMI
         help
           This enables the NAND flash controller on the BCM UMI block.
 
-          No board specfic support is done by this driver, each board
+          No board specific support is done by this driver, each board
           must advertise a platform_device for the driver to attach.
 
 config MTD_NAND_BCM_UMI_HWCS
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index a067d090cb3..bc65bf71e1a 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -228,7 +228,7 @@ static int __devinit ams_delta_init(struct platform_device *pdev)
                                           AMS_DELTA_LATCH2_NAND_NCE |
                                           AMS_DELTA_LATCH2_NAND_NWP);
 
-        /* Scan to find existance of the device */
+        /* Scan to find existence of the device */
         if (nand_scan(ams_delta_mtd, 1)) {
                 err = -ENXIO;
                 goto out_mtd;
diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c
index 7c95da1f612..0911cf03db8 100644
--- a/drivers/mtd/nand/autcpu12.c
+++ b/drivers/mtd/nand/autcpu12.c
@@ -176,7 +176,7 @@ static int __init autcpu12_init(void)
          */
         this->options = NAND_USE_FLASH_BBT;
 
-        /* Scan to find existance of the device */
+        /* Scan to find existence of the device */
         if (nand_scan(autcpu12_mtd, 1)) {
                 err = -ENXIO;
                 goto out_ior;
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
index 9f1b451005c..71c35a0b982 100644
--- a/drivers/mtd/nand/cs553x_nand.c
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -241,7 +241,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
         /* Enable the following for a flash based bad block table */
         this->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
 
-        /* Scan to find existance of the device */
+        /* Scan to find existence of the device */
         if (nand_scan(new_mtd, 1)) {
                 err = -ENXIO;
                 goto out_ior;
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 8c8d3c86c0e..4633f094c51 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -724,7 +724,7 @@ static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
 }
 
 /* This helper function setups the registers for ECC and whether or not
- * the spare area will be transfered. */
+ * the spare area will be transferred. */
 static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
                                 bool transfer_spare)
 {
@@ -965,7 +965,7 @@ static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
 
                         if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
                                 /* If err_byte is larger than ECC_SECTOR_SIZE,
-                                 * means error happend in OOB, so we ignore
+                                 * means error happened in OOB, so we ignore
                                  * it. It's no need for us to correct it
                                  * err_device is represented the NAND error
                                  * bits are happened in if there are more
@@ -1109,7 +1109,7 @@ static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 }
 
 /* This is the callback that the NAND core calls to write a page without ECC.
- * raw access is similiar to ECC page writes, so all the work is done in the
+ * raw access is similar to ECC page writes, so all the work is done in the
  * write_page() function above.
  */
 static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
index b7f8de7b278..96c0b34ba8d 100644
--- a/drivers/mtd/nand/diskonchip.c
+++ b/drivers/mtd/nand/diskonchip.c
@@ -137,7 +137,7 @@ static struct rs_control *rs_decoder;
  *
  * Fabrice Bellard figured this out in the old docecc code. I added
  * some comments, improved a minor bit and converted it to make use
- * of the generic Reed-Solomon libary. tglx
+ * of the generic Reed-Solomon library. tglx
  */
 static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
 {
@@ -400,7 +400,7 @@ static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
         doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
         doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
 
-        /* We cant' use dev_ready here, but at least we wait for the
+        /* We can't' use dev_ready here, but at least we wait for the
          * command to complete
          */
         udelay(50);
@@ -986,7 +986,7 @@ static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
                 dummy = ReadDOC(docptr, ECCConf);
         }
 
-        /* Error occured ? */
+        /* Error occurred ? */
         if (dummy & 0x80) {
                 for (i = 0; i < 6; i++) {
                         if (DoC_is_MillenniumPlus(doc))
@@ -1160,7 +1160,7 @@ static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partitio
         /* NOTE: The lines below modify internal variables of the NAND and MTD
            layers; variables with have already been configured by nand_scan.
            Unfortunately, we didn't know before this point what these values
-           should be.  Thus, this code is somewhat dependant on the exact
+           should be.  Thus, this code is somewhat dependent on the exact
            implementation of the NAND layer.  */
         if (mh->UnitSizeFactor != 0xff) {
                 this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 7a13d42cbab..537e380b8dc 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -59,7 +59,7 @@ struct fsl_elbc_mtd {
         unsigned int fmr;       /* FCM Flash Mode Register value     */
 };
 
-/* Freescale eLBC FCM controller infomation */
+/* Freescale eLBC FCM controller information */
 
 struct fsl_elbc_fcm_ctrl {
         struct nand_hw_control controller;
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
index 205b10b9f9b..0d45ef3883e 100644
--- a/drivers/mtd/nand/fsmc_nand.c
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -335,7 +335,7 @@ static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
 
 /*
  * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
- * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction upto
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
  * max of 8-bits)
  */
 static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
@@ -381,7 +381,7 @@ static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
 
 /*
  * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
- * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction upto
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
  * max of 1-bit)
  */
 static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
@@ -408,10 +408,10 @@ static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
  * @buf:        buffer to store read data
  * @page:       page number to read
  *
- * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
+ * This routine is needed for fsmc version 8 as reading from NAND chip has to be
  * performed in a strict sequence as follows:
  * data(512 byte) -> ecc(13 byte)
- * After this read, fsmc hardware generates and reports error data bits(upto a
+ * After this read, fsmc hardware generates and reports error data bits(up to a
  * max of 8 bits)
  */
 static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
@@ -686,7 +686,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
         }
 
         /*
-         * Scan to find existance of the device
+         * Scan to find existence of the device
          */
         if (nand_scan_ident(&host->mtd, 1, NULL)) {
                 ret = -ENXIO;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 85cfc061d41..c54a4cbac6b 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -1582,7 +1582,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
 }
 
 /**
- * nand_read - [MTD Interface] MTD compability function for nand_do_read_ecc
+ * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
  * @mtd:        MTD device structure
  * @from:       offset to read from
  * @len:        number of bytes to read
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
index a1e8b30078d..af46428286f 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -945,7 +945,7 @@ static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc
                 rd2 = NULL;
                 /* Per chip or per device ? */
                 chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
-                /* Mirrored table avilable ? */
+                /* Mirrored table available ? */
                 if (md) {
                         if (td->pages[i] == -1 && md->pages[i] == -1) {
                                 writeops = 0x03;
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
index 213181be0d9..893d95bfea4 100644
--- a/drivers/mtd/nand/nandsim.c
+++ b/drivers/mtd/nand/nandsim.c
@@ -162,7 +162,7 @@ MODULE_PARM_DESC(bitflips,       "Maximum number of random bit flips per page (z
 MODULE_PARM_DESC(gravepages,     "Pages that lose data [: maximum reads (defaults to 3)]"
                                  " separated by commas e.g. 1401:2 means page 1401"
                                  " can be read only twice before failing");
-MODULE_PARM_DESC(rptwear,        "Number of erases inbetween reporting wear, if not zero");
+MODULE_PARM_DESC(rptwear,        "Number of erases between reporting wear, if not zero");
 MODULE_PARM_DESC(overridesize,   "Specifies the NAND Flash size overriding the ID bytes. "
                                  "The size is specified in erase blocks and as the exponent of a power of two"
                                  " e.g. 5 means a size of 32 erase blocks");
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
index 8c0b6937522..a045a4a581b 100644
--- a/drivers/mtd/nand/nomadik_nand.c
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -151,7 +151,7 @@ static int nomadik_nand_probe(struct platform_device *pdev)
         nand->options = pdata->options;
 
         /*
-         * Scan to find existance of the device
+         * Scan to find existence of the device
          */
         if (nand_scan(&host->mtd, 1)) {
                 ret = -ENXIO;
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
index 59efa829ef2..20bfe5f15af 100644
--- a/drivers/mtd/nand/pasemi_nand.c
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -157,7 +157,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev)
         /* Enable the following for a flash based bad block table */
         chip->options = NAND_USE_FLASH_BBT | NAND_NO_AUTOINCR;
 
-        /* Scan to find existance of the device */
+        /* Scan to find existence of the device */
         if (nand_scan(pasemi_nand_mtd, 1)) {
                 err = -ENXIO;
                 goto out_lpc;
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
index 317aff428e4..caf5a736340 100644
--- a/drivers/mtd/nand/plat_nand.c
+++ b/drivers/mtd/nand/plat_nand.c
@@ -95,7 +95,7 @@ static int __devinit plat_nand_probe(struct platform_device *pdev)
                         goto out;
         }
 
-        /* Scan to find existance of the device */
+        /* Scan to find existence of the device */
         if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
                 err = -ENXIO;
                 goto out;
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index ab7f4c33ced..ff0701276d6 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -184,7 +184,7 @@ struct pxa3xx_nand_info {
 
 static int use_dma = 1;
 module_param(use_dma, bool, 0444);
-MODULE_PARM_DESC(use_dma, "enable DMA for data transfering to/from NAND HW");
+MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
 
 /*
  * Default NAND flash controller configuration setup by the
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
index 6322d1fb5d6..cae2e013c98 100644
--- a/drivers/mtd/nand/r852.c
+++ b/drivers/mtd/nand/r852.c
@@ -185,7 +185,7 @@ static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
 
         dbg_verbose("doing dma %s ", do_read ? "read" : "write");
 
-        /* Set intial dma state: for reading first fill on board buffer,
+        /* Set initial dma state: for reading first fill on board buffer,
           from device, for writes first fill the buffer  from memory*/
         dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
 
@@ -766,7 +766,7 @@ static irqreturn_t r852_irq(int irq, void *data)
                 ret = IRQ_HANDLED;
                 dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
 
-                /* we shouldn't recieve any interrupts if we wait for card
+                /* we shouldn't receive any interrupts if we wait for card
                         to settle */
                 WARN_ON(dev->card_unstable);
 
@@ -794,13 +794,13 @@ static irqreturn_t r852_irq(int irq, void *data)
                 ret = IRQ_HANDLED;
 
                 if (dma_status & R852_DMA_IRQ_ERROR) {
-                        dbg("recieved dma error IRQ");
+                        dbg("received dma error IRQ");
                         r852_dma_done(dev, -EIO);
                         complete(&dev->dma_done);
                         goto out;
                 }
 
-                /* recieved DMA interrupt out of nowhere? */
+                /* received DMA interrupt out of nowhere? */
                 WARN_ON_ONCE(dev->dma_stage == 0);
 
                 if (dev->dma_stage == 0)
@@ -960,7 +960,7 @@ int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
                 &dev->card_detect_work, 0);
 
 
-        printk(KERN_NOTICE DRV_NAME ": driver loaded succesfully\n");
+        printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n");
         return 0;
 
 error10:
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index 546c2f0eb2e..81bbb5ee148 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -78,7 +78,7 @@ static void start_translation(struct sh_flctl *flctl)
 
 static void timeout_error(struct sh_flctl *flctl, const char *str)
 {
-        dev_err(&flctl->pdev->dev, "Timeout occured in %s\n", str);
+        dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
 }
 
 static void wait_completion(struct sh_flctl *flctl)
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
index 4a8f367c295..57cc80cd01a 100644
--- a/drivers/mtd/nand/sm_common.c
+++ b/drivers/mtd/nand/sm_common.c
@@ -121,7 +121,7 @@ int sm_register_device(struct mtd_info *mtd, int smartmedia)
         if (ret)
                 return ret;
 
-        /* Bad block marker postion */
+        /* Bad block marker position */
         chip->badblockpos = 0x05;
         chip->badblockbits = 7;
         chip->block_markbad = sm_block_markbad;
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
index 38fb16771f8..14c57870782 100644
--- a/drivers/mtd/nand/tmio_nand.c
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -4,7 +4,7 @@
  * Slightly murky pre-git history of the driver:
  *
  * Copyright (c) Ian Molton 2004, 2005, 2008
- *    Original work, independant of sharps code. Included hardware ECC support.
+ *    Original work, independent of sharps code. Included hardware ECC support.
  *    Hard ECC did not work for writes in the early revisions.
  * Copyright (c) Dirk Opfer 2005.
  *    Modifications developed from sharps code but
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index f591f615d3f..1fcb41adab0 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -608,7 +608,7 @@ static int omap2_onenand_enable(struct mtd_info *mtd)
 
         ret = regulator_enable(c->regulator);
         if (ret != 0)
-                dev_err(&c->pdev->dev, "cant enable regulator\n");
+                dev_err(&c->pdev->dev, "can't enable regulator\n");
 
         return ret;
 }
@@ -620,7 +620,7 @@ static int omap2_onenand_disable(struct mtd_info *mtd)
 
         ret = regulator_disable(c->regulator);
         if (ret != 0)
-                dev_err(&c->pdev->dev, "cant disable regulator\n");
+                dev_err(&c->pdev->dev, "can't disable regulator\n");
 
         return ret;
 }
diff --git a/drivers/mtd/onenand/onenand_sim.c b/drivers/mtd/onenand/onenand_sim.c
index 8b246061d51..5ef3bd54777 100644
--- a/drivers/mtd/onenand/onenand_sim.c
+++ b/drivers/mtd/onenand/onenand_sim.c
@@ -321,7 +321,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
                                 continue;
                         if (memcmp(dest + off, ffchars, this->subpagesize) &&
                             onenand_check_overwrite(dest + off, src + off, this->subpagesize))
-                                printk(KERN_ERR "over-write happend at 0x%08x\n", offset);
+                                printk(KERN_ERR "over-write happened at 0x%08x\n", offset);
                         memcpy(dest + off, src + off, this->subpagesize);
                 }
                 /* Fall through */
@@ -335,7 +335,7 @@ static void onenand_data_handle(struct onenand_chip *this, int cmd,
                 dest = ONENAND_CORE_SPARE(flash, this, offset);
                 if (memcmp(dest, ffchars, mtd->oobsize) &&
                     onenand_check_overwrite(dest, src, mtd->oobsize))
-                        printk(KERN_ERR "OOB: over-write happend at 0x%08x\n",
+                        printk(KERN_ERR "OOB: over-write happened at 0x%08x\n",
                                offset);
                 memcpy(dest, src, mtd->oobsize);
                 break;
diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c
index 2b0daae4018..ed3d6cd2c6d 100644
--- a/drivers/mtd/sm_ftl.c
+++ b/drivers/mtd/sm_ftl.c
@@ -540,7 +540,7 @@ static int sm_check_block(struct sm_ftl *ftl, int zone, int block)
                         return -EIO;
         }
 
-        /* If the block is sliced (partialy erased usually) erase it */
+        /* If the block is sliced (partially erased usually) erase it */
         if (i == 2) {
                 sm_erase_block(ftl, zone, block, 1);
                 return 1;
@@ -878,7 +878,7 @@ static int sm_init_zone(struct sm_ftl *ftl, int zone_num)
         return 0;
 }
 
-/* Get and automaticly initialize an FTL mapping for one zone */
+/* Get and automatically initialize an FTL mapping for one zone */
 struct ftl_zone *sm_get_zone(struct sm_ftl *ftl, int zone_num)
 {
         struct ftl_zone *zone;
diff --git a/drivers/mtd/ubi/scan.c b/drivers/mtd/ubi/scan.c
index 11eb8ef1248..d2d12ab7def 100644
--- a/drivers/mtd/ubi/scan.c
+++ b/drivers/mtd/ubi/scan.c
@@ -968,7 +968,7 @@ static int process_eb(struct ubi_device *ubi, struct ubi_scan_info *si,
                          * contains garbage because of a power cut during erase
                          * operation. So we just schedule this PEB for erasure.
                          *
-                         * Besides, in case of NOR flash, we deliberatly
+                         * Besides, in case of NOR flash, we deliberately
                          * corrupt both headers because NOR flash erasure is
                          * slow and can start from the end.
                          */
diff --git a/drivers/net/3c501.c b/drivers/net/3c501.c
index 9e1c03eb97a..5420f6de27d 100644
--- a/drivers/net/3c501.c
+++ b/drivers/net/3c501.c
@@ -399,7 +399,7 @@ static void el_timeout(struct net_device *dev)
  * as we may still be attempting to retrieve the last RX packet buffer.
  *
  * When a transmit times out we dump the card into control mode and just
- * start again. It happens enough that it isnt worth logging.
+ * start again. It happens enough that it isn't worth logging.
  *
  * We avoid holding the spin locks when doing the packet load to the board.
  * The device is very slow, and its DMA mode is even slower. If we held the
@@ -499,7 +499,7 @@ static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev)
  *
  * Handle the ether interface interrupts. The 3c501 needs a lot more
  * hand holding than most cards. In particular we get a transmit interrupt
- * with a collision error because the board firmware isnt capable of rewinding
+ * with a collision error because the board firmware isn't capable of rewinding
  * its own transmit buffer pointers. It can however count to 16 for us.
  *
  * On the receive side the card is also very dumb. It has no buffering to
@@ -732,7 +732,7 @@ static void el_receive(struct net_device *dev)
  * el_reset: Reset a 3c501 card
  * @dev: The 3c501 card about to get zapped
  *
- * Even resetting a 3c501 isnt simple. When you activate reset it loses all
+ * Even resetting a 3c501 isn't simple. When you activate reset it loses all
  * its configuration. You must hold the lock when doing this. The function
  * cannot take the lock itself as it is callable from the irq handler.
  */
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
index de579d04316..bc0d1a1c2e2 100644
--- a/drivers/net/3c523.c
+++ b/drivers/net/3c523.c
@@ -44,7 +44,7 @@
    this for the 64K version would require a lot of heinous bank
    switching, which I'm sure not interested in doing.  If you try to
    implement a bank switching version, you'll basically have to remember
-   what bank is enabled and do a switch everytime you access a memory
+   what bank is enabled and do a switch every time you access a memory
    location that's not current.  You'll also have to remap pointers on
    the driver side, because it only knows about 16K of the memory.
    Anyone desperate or masochistic enough to try?
diff --git a/drivers/net/3c527.c b/drivers/net/3c527.c
index 8c094bae8bf..d9d056d207f 100644
--- a/drivers/net/3c527.c
+++ b/drivers/net/3c527.c
@@ -51,7 +51,7 @@ DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " Richard Procter <rnp@paradise.net.
  *      circular buffer queues.
  *
  *      The mailboxes can be used for controlling how the card traverses
- *      its buffer rings, but are used only for inital setup in this
+ *      its buffer rings, but are used only for initial setup in this
  *      implementation.  The exec mailbox allows a variety of commands to
  *      be executed. Each command must complete before the next is
  *      executed. Primarily we use the exec mailbox for controlling the
@@ -813,7 +813,7 @@ static void mc32_flush_rx_ring(struct net_device *dev)
  *
  *      This sets up the host transmit data-structures.
  *
- *      First, we obtain from the card it's current postion in the tx
+ *      First, we obtain from the card it's current position in the tx
  *      ring, so that we will know where to begin transmitting
  *      packets.
  *
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 0a92436f053..8cc22568ebd 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -984,7 +984,7 @@ static int __init vortex_eisa_init(void)
                  * any device have been found when we exit from
                  * eisa_driver_register (the bus root driver may not be
                  * initialized yet). So we blindly assume something was
-                 * found, and let the sysfs magic happend...
+                 * found, and let the sysfs magic happened...
                  */
                 eisa_found = 1;
         }
diff --git a/drivers/net/acenic.c b/drivers/net/acenic.c
index 41d9911202d..ee648fe5d96 100644
--- a/drivers/net/acenic.c
+++ b/drivers/net/acenic.c
@@ -1584,7 +1584,7 @@ static void ace_watchdog(struct net_device *data)
         /*
          * We haven't received a stats update event for more than 2.5
          * seconds and there is data in the transmit queue, thus we
-         * asume the card is stuck.
+         * assume the card is stuck.
          */
         if (*ap->tx_csm != ap->tx_ret_csm) {
                 printk(KERN_WARNING "%s: Transmitter is stuck, %08x\n",
@@ -2564,7 +2564,7 @@ restart:
 
                 /*
                  * A TX-descriptor producer (an IRQ) might have gotten
-                 * inbetween, making the ring free again. Since xmit is
+                 * between, making the ring free again. Since xmit is
                  * serialized, this is the only situation we have to
                  * re-test.
                  */
diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c
index 2ca880b4c0d..88495c48a81 100644
--- a/drivers/net/amd8111e.c
+++ b/drivers/net/amd8111e.c
@@ -1398,7 +1398,7 @@ static void amd8111e_set_multicast_list(struct net_device *dev)
                 mc_filter[1] = mc_filter[0] = 0;
                 lp->options &= ~OPTION_MULTICAST_ENABLE;
                 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
-                /* disable promiscous mode */
+                /* disable promiscuous mode */
                 writel(PROM, lp->mmio + CMD2);
                 return;
         }
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index f4744fc8976..65a78f965dd 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -133,7 +133,7 @@ struct net_local {
 /* Run-time register bank 2 definitions. */
 #define DATAPORT                8               /* Word-wide DMA or programmed-I/O dataport. */
 #define TX_START                10
-#define COL16CNTL               11              /* Controll Reg for 16 collisions */
+#define COL16CNTL               11              /* Control Reg for 16 collisions */
 #define MODE13                  13
 #define RX_CTRL                 14
 /* Configuration registers only on the '865A/B chips. */
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 1ff001a8270..b0a71e2f28a 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -2509,7 +2509,7 @@ static struct pci_driver atl1e_driver = {
         .id_table = atl1e_pci_tbl,
         .probe    = atl1e_probe,
         .remove   = __devexit_p(atl1e_remove),
-        /* Power Managment Hooks */
+        /* Power Management Hooks */
 #ifdef CONFIG_PM
         .suspend  = atl1e_suspend,
         .resume   = atl1e_resume,
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index e637e9f28fd..f46ee4546fd 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -1701,7 +1701,7 @@ static struct pci_driver atl2_driver = {
         .id_table = atl2_pci_tbl,
         .probe    = atl2_probe,
         .remove   = __devexit_p(atl2_remove),
-        /* Power Managment Hooks */
+        /* Power Management Hooks */
         .suspend  = atl2_suspend,
 #ifdef CONFIG_PM
         .resume   = atl2_resume,
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index e94a966af41..c48104b0886 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -597,7 +597,7 @@ static int bcm_enet_set_mac_address(struct net_device *dev, void *p)
 }
 
 /*
- * Change rx mode (promiscous/allmulti) and update multicast list
+ * Change rx mode (promiscuous/allmulti) and update multicast list
  */
 static void bcm_enet_set_multicast_list(struct net_device *dev)
 {
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 5a4a87e7c5e..1e2d825bb94 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -1331,7 +1331,7 @@ err:
 
 /*
  * Uses MCC for this command as it may be called in BH context
- * (mc == NULL) => multicast promiscous
+ * (mc == NULL) => multicast promiscuous
  */
 int be_cmd_multicast_set(struct be_adapter *adapter, u32 if_id,
                 struct net_device *netdev, struct be_dma_mem *mem)
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index a71163f1e34..9a54c8b24ff 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -708,7 +708,7 @@ static void be_set_multicast_list(struct net_device *netdev)
                 goto done;
         }
 
-        /* BE was previously in promiscous mode; disable it */
+        /* BE was previously in promiscuous mode; disable it */
         if (adapter->promiscuous) {
                 adapter->promiscuous = false;
                 be_cmd_promiscuous_config(adapter, adapter->port_num, 0);
diff --git a/drivers/net/bna/bna_hw.h b/drivers/net/bna/bna_hw.h
index 806b224a4c6..6cb89692f5c 100644
--- a/drivers/net/bna/bna_hw.h
+++ b/drivers/net/bna/bna_hw.h
@@ -897,7 +897,7 @@ static struct bna_ritseg_pool_cfg name[BFI_RIT_SEG_TOTAL_POOLS] =	\
  * Catapult RSS Table Base Offset Address
  *
  * Exists in RAD memory space.
- * Each entry is 352 bits, but alligned on
+ * Each entry is 352 bits, but aligned on
  * 64 byte (512 bit) boundary. Accessed
  * 4 byte words, the whole entry can be
  * broken into 11 word accesses.
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index b7ff87b35fb..e0fca701d2f 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1220,7 +1220,7 @@ struct bnx2x {
         struct bnx2x_dcbx_port_params           dcbx_port_params;
         int                                     dcb_version;
 
-        /* DCBX Negotation results */
+        /* DCBX Negotiation results */
         struct dcbx_features                    dcbx_local_feat;
         u32                                     dcbx_error;
         u32                                     pending_max;
diff --git a/drivers/net/bnx2x/bnx2x_hsi.h b/drivers/net/bnx2x/bnx2x_hsi.h
index be503cc0a50..dac1bf9cbbf 100644
--- a/drivers/net/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/bnx2x/bnx2x_hsi.h
@@ -3019,7 +3019,7 @@ struct tstorm_eth_mac_filter_config {
 
 
 /*
- * common flag to indicate existance of TPA.
+ * common flag to indicate existence of TPA.
  */
 struct tstorm_eth_tpa_exist {
 #if defined(__BIG_ENDIAN)
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index f2f367d4e74..974ef2be36a 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -2823,7 +2823,7 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp,
                                      struct link_params *params)
 {
         u16 cnt, ctrl;
-        /* Wait for soft reset to get cleared upto 1 sec */
+        /* Wait for soft reset to get cleared up to 1 sec */
         for (cnt = 0; cnt < 1000; cnt++) {
                 bnx2x_cl45_read(bp, phy,
                                 MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, &ctrl);
@@ -4141,7 +4141,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
                         val = (1<<5);
                         /*
                          * Note that 2.5G works only when used with 1G
-                         * advertisment
+                         * advertisement
                          */
                 } else
                         val = (1<<5);
@@ -4151,7 +4151,7 @@ static u8 bnx2x_8073_config_init(struct bnx2x_phy *phy,
                         PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
                         val |= (1<<7);
 
-                /* Note that 2.5G works only when used with 1G advertisment */
+                /* Note that 2.5G works only when used with 1G advertisement */
                 if (phy->speed_cap_mask &
                         (PORT_HW_CFG_SPEED_CAPABILITY_D0_1G |
                          PORT_HW_CFG_SPEED_CAPABILITY_D0_2_5G))
@@ -5232,14 +5232,14 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy,
                 bnx2x_cl45_write(bp, phy,
                                  MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 1);
         } else {
-                /* Force 1Gbps using autoneg with 1G advertisment */
+                /* Force 1Gbps using autoneg with 1G advertisement */
 
                 /* Allow CL37 through CL73 */
                 DP(NETIF_MSG_LINK, "XGXS 8706 AutoNeg\n");
                 bnx2x_cl45_write(bp, phy,
                                  MDIO_AN_DEVAD, MDIO_AN_REG_CL37_CL73, 0x040c);
 
-                /* Enable Full-Duplex advertisment on CL37 */
+                /* Enable Full-Duplex advertisement on CL37 */
                 bnx2x_cl45_write(bp, phy,
                                  MDIO_AN_DEVAD, MDIO_AN_REG_CL37_FC_LP, 0x0020);
                 /* Enable CL37 AN */
@@ -6269,7 +6269,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy,
 
         switch (actual_phy_selection) {
         case PORT_HW_CFG_PHY_SELECTION_HARDWARE_DEFAULT:
-                /* Do nothing. Essentialy this is like the priority copper */
+                /* Do nothing. Essentially this is like the priority copper */
                 break;
         case PORT_HW_CFG_PHY_SELECTION_FIRST_PHY_PRIORITY:
                 val |= MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER;
@@ -7765,7 +7765,7 @@ u8 bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
         REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0);
 
         msleep(10);
-        /* The PHY reset is controled by GPIO 1
+        /* The PHY reset is controlled by GPIO 1
          * Hold it as vars low
          */
          /* clear link led */
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 32e64cc85d2..a97a4a1c344 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -3702,7 +3702,7 @@ static void bnx2x_eq_int(struct bnx2x *bp)
         if ((hw_cons & EQ_DESC_MAX_PAGE) == EQ_DESC_MAX_PAGE)
                 hw_cons++;
 
-        /* This function may never run in parralel with itself for a
+        /* This function may never run in parallel with itself for a
          * specific bp, thus there is no need in "paired" read memory
          * barrier here.
          */
@@ -5089,7 +5089,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code)
                 /* Step 1: set zeroes to all ilt page entries with valid bit on
                  * Step 2: set the timers first/last ilt entry to point
                  * to the entire range to prevent ILT range error for 3rd/4th
-                 * vnic (this code assumes existance of the vnic)
+                 * vnic (this code assumes existence of the vnic)
                  *
                  * both steps performed by call to bnx2x_ilt_client_init_op()
                  * with dummy TM client
@@ -8685,7 +8685,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
                                 E1H_FUNC_MAX * sizeof(struct drv_func_mb);
                 /*
                  * get mf configuration:
-                 * 1. existance of MF configuration
+                 * 1. existence of MF configuration
                  * 2. MAC address must be legal (check only upper bytes)
                  *    for  Switch-Independent mode;
                  *    OVLAN must be legal for Switch-Dependent mode
@@ -8727,7 +8727,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
                         default:
                                 /* Unknown configuration: reset mf_config */
                                 bp->mf_config[vn] = 0;
-                                DP(NETIF_MSG_PROBE, "Unkown MF mode 0x%x\n",
+                                DP(NETIF_MSG_PROBE, "Unknown MF mode 0x%x\n",
                                    val);
                         }
                 }
@@ -9777,7 +9777,7 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev,
 
 #endif
 
-        /* Configure interupt mode: try to enable MSI-X/MSI if
+        /* Configure interrupt mode: try to enable MSI-X/MSI if
          * needed, set bp->num_queues appropriately.
          */
         bnx2x_set_int_mode(bp);
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 1c89f19a442..1509a2318af 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -175,9 +175,9 @@
    the initial credit value; read returns the current value of the credit
    counter. Must be initialized to 1 at start-up. */
 #define CCM_REG_CFC_INIT_CRD                                     0xd0204
-/* [RW 2] Auxillary counter flag Q number 1. */
+/* [RW 2] Auxiliary counter flag Q number 1. */
 #define CCM_REG_CNT_AUX1_Q                                       0xd00c8
-/* [RW 2] Auxillary counter flag Q number 2. */
+/* [RW 2] Auxiliary counter flag Q number 2. */
 #define CCM_REG_CNT_AUX2_Q                                       0xd00cc
 /* [RW 28] The CM header value for QM request (primary). */
 #define CCM_REG_CQM_CCM_HDR_P                                    0xd008c
@@ -457,13 +457,13 @@
 #define CSDM_REG_AGG_INT_MODE_9                                  0xc21dc
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define CSDM_REG_CFC_RSP_START_ADDR                              0xc2008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define CSDM_REG_CMP_COUNTER_MAX0                                0xc201c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define CSDM_REG_CMP_COUNTER_MAX1                                0xc2020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define CSDM_REG_CMP_COUNTER_MAX2                                0xc2024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define CSDM_REG_CMP_COUNTER_MAX3                                0xc2028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
@@ -851,7 +851,7 @@
 #define IGU_REG_ATTN_MSG_ADDR_L                          0x130120
 /* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
  * 1-pending). [2:0] = PFID. Pending means attention message was sent; but
- * write done didnt receive. */
+ * write done didn't receive. */
 #define IGU_REG_ATTN_WRITE_DONE_PENDING                  0x130030
 #define IGU_REG_BLOCK_CONFIGURATION                              0x130000
 #define IGU_REG_COMMAND_REG_32LSB_DATA                           0x130124
@@ -862,7 +862,7 @@
 #define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP                         0x130200
 /* [R 5] Debug: ctrl_fsm */
 #define IGU_REG_CTRL_FSM                                         0x130064
-/* [R 1] data availble for error memory. If this bit is clear do not red
+/* [R 1] data available for error memory. If this bit is clear do not red
  * from error_handling_memory. */
 #define IGU_REG_ERROR_HANDLING_DATA_VALID                        0x130130
 /* [RW 11] Parity mask register #0 read/write */
@@ -3015,7 +3015,7 @@
    block. Should be used for close the gates. */
 #define PXP_REG_HST_DISCARD_DOORBELLS                            0x1030a4
 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
-   should update accoring to 'hst_discard_doorbells' register when the state
+   should update according to 'hst_discard_doorbells' register when the state
    machine is idle */
 #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS                     0x1030a0
 /* [RW 1] When 1; new internal writes arriving to the block are discarded.
@@ -3023,7 +3023,7 @@
 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES                      0x1030a8
 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
    means this PSWHST is discarding inputs from this client. Each bit should
-   update accoring to 'hst_discard_internal_writes' register when the state
+   update according to 'hst_discard_internal_writes' register when the state
    machine is idle. */
 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS               0x10309c
 /* [WB 160] Used for initialization of the inbound interrupts memory */
@@ -3822,13 +3822,13 @@
 #define TSDM_REG_AGG_INT_T_1                                     0x420bc
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define TSDM_REG_CFC_RSP_START_ADDR                              0x42008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define TSDM_REG_CMP_COUNTER_MAX0                                0x4201c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define TSDM_REG_CMP_COUNTER_MAX1                                0x42020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define TSDM_REG_CMP_COUNTER_MAX2                                0x42024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define TSDM_REG_CMP_COUNTER_MAX3                                0x42028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
@@ -4284,13 +4284,13 @@
 #define USDM_REG_AGG_INT_T_6                                     0xc40d0
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define USDM_REG_CFC_RSP_START_ADDR                              0xc4008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define USDM_REG_CMP_COUNTER_MAX0                                0xc401c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define USDM_REG_CMP_COUNTER_MAX1                                0xc4020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define USDM_REG_CMP_COUNTER_MAX2                                0xc4024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define USDM_REG_CMP_COUNTER_MAX3                                0xc4028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
@@ -4798,13 +4798,13 @@
 #define XSDM_REG_AGG_INT_MODE_1                                  0x1661bc
 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 #define XSDM_REG_CFC_RSP_START_ADDR                              0x166008
-/* [RW 16] The maximum value of the competion counter #0 */
+/* [RW 16] The maximum value of the completion counter #0 */
 #define XSDM_REG_CMP_COUNTER_MAX0                                0x16601c
-/* [RW 16] The maximum value of the competion counter #1 */
+/* [RW 16] The maximum value of the completion counter #1 */
 #define XSDM_REG_CMP_COUNTER_MAX1                                0x166020
-/* [RW 16] The maximum value of the competion counter #2 */
+/* [RW 16] The maximum value of the completion counter #2 */
 #define XSDM_REG_CMP_COUNTER_MAX2                                0x166024
-/* [RW 16] The maximum value of the competion counter #3 */
+/* [RW 16] The maximum value of the completion counter #3 */
 #define XSDM_REG_CMP_COUNTER_MAX3                                0x166028
 /* [RW 13] The start address in the internal RAM for the completion
    counters. */
diff --git a/drivers/net/bonding/bond_alb.h b/drivers/net/bonding/bond_alb.h
index 118c28aa471..b3bc7502868 100644
--- a/drivers/net/bonding/bond_alb.h
+++ b/drivers/net/bonding/bond_alb.h
@@ -76,7 +76,7 @@ struct tlb_client_info {
                                  */
         u32 tx_bytes;           /* Each Client acumulates the BytesTx that
                                  * were tranmitted to it, and after each
-                                 * CallBack the LoadHistory is devided
+                                 * CallBack the LoadHistory is divided
                                  * by the balance interval
                                  */
         u32 load_history;       /* This field contains the amount of Bytes
diff --git a/drivers/net/caif/caif_shmcore.c b/drivers/net/caif/caif_shmcore.c
index 80511167f35..731aa119377 100644
--- a/drivers/net/caif/caif_shmcore.c
+++ b/drivers/net/caif/caif_shmcore.c
@@ -591,7 +591,7 @@ int caif_shmcore_probe(struct shmdev_layer *pshm_dev)
                         (NR_TX_BUF * TX_BUF_SZ + NR_RX_BUF * RX_BUF_SZ)) {
 
                 pr_warn("ERROR, Amount of available"
-                                " Phys. SHM cannot accomodate current SHM "
+                                " Phys. SHM cannot accommodate current SHM "
                                 "driver configuration, Bailing out ...\n");
                 free_netdev(pshm_dev->pshm_netdev);
                 return -ENOMEM;
diff --git a/drivers/net/caif/caif_spi.c b/drivers/net/caif/caif_spi.c
index 20da1996d35..57e63937381 100644
--- a/drivers/net/caif/caif_spi.c
+++ b/drivers/net/caif/caif_spi.c
@@ -397,7 +397,7 @@ int cfspi_xmitlen(struct cfspi *cfspi)
         int pkts = 0;
 
         /*
-         * Decommit previously commited frames.
+         * Decommit previously committed frames.
          * skb_queue_splice_tail(&cfspi->chead,&cfspi->qhead)
          */
         while (skb_peek(&cfspi->chead)) {
diff --git a/drivers/net/caif/caif_spi_slave.c b/drivers/net/caif/caif_spi_slave.c
index 1b9943a4eda..b009e03cda9 100644
--- a/drivers/net/caif/caif_spi_slave.c
+++ b/drivers/net/caif/caif_spi_slave.c
@@ -98,7 +98,7 @@ void cfspi_xfer(struct work_struct *work)
 
                         cfspi_dbg_state(cfspi, CFSPI_STATE_FETCH_PKT);
 
-                        /* Copy commited SPI frames after the SPI indication. */
+                        /* Copy committed SPI frames after the SPI indication. */
                         ptr = (u8 *) cfspi->xfer.va_tx;
                         ptr += SPI_IND_SZ;
                         len = cfspi_xmitfrm(cfspi, ptr, cfspi->tx_cpck_len);
@@ -158,7 +158,7 @@ void cfspi_xfer(struct work_struct *work)
 
                 cfspi_dbg_state(cfspi, CFSPI_STATE_SIG_ACTIVE);
 
-                /* Signal that we are ready to recieve data. */
+                /* Signal that we are ready to receive data. */
                 cfspi->dev->sig_xfer(true, cfspi->dev);
 
                 cfspi_dbg_state(cfspi, CFSPI_STATE_WAIT_XFER_DONE);
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index 57d2ffbbb43..74efb5a2ad4 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -416,7 +416,7 @@ static netdev_tx_t at91_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
         stats->tx_bytes += cf->can_dlc;
 
-        /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+        /* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */
         can_put_echo_skb(skb, dev, mb - AT91_MB_TX_FIRST);
 
         /*
@@ -782,7 +782,7 @@ static void at91_irq_tx(struct net_device *dev, u32 reg_sr)
                 reg_msr = at91_read(priv, AT91_MSR(mb));
                 if (likely(reg_msr & AT91_MSR_MRDY &&
                            ~reg_msr & AT91_MSR_MABT)) {
-                        /* _NOTE_: substract AT91_MB_TX_FIRST offset from mb! */
+                        /* _NOTE_: subtract AT91_MB_TX_FIRST offset from mb! */
                         can_get_echo_skb(dev, mb - AT91_MB_TX_FIRST);
                         dev->stats.tx_packets++;
                 }
diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c
index 31552959aed..7e5cc0bd913 100644
--- a/drivers/net/can/c_can/c_can.c
+++ b/drivers/net/can/c_can/c_can.c
@@ -813,7 +813,7 @@ static int c_can_handle_state_change(struct net_device *dev,
         struct sk_buff *skb;
         struct can_berr_counter bec;
 
-        /* propogate the error condition to the CAN stack */
+        /* propagate the error condition to the CAN stack */
         skb = alloc_can_err_skb(dev, &cf);
         if (unlikely(!skb))
                 return 0;
@@ -887,7 +887,7 @@ static int c_can_handle_bus_err(struct net_device *dev,
         if (lec_type == LEC_UNUSED || lec_type == LEC_NO_ERROR)
                 return 0;
 
-        /* propogate the error condition to the CAN stack */
+        /* propagate the error condition to the CAN stack */
         skb = alloc_can_err_skb(dev, &cf);
         if (unlikely(!skb))
                 return 0;
diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c
index 102b16c6cc9..587fba48cdd 100644
--- a/drivers/net/can/janz-ican3.c
+++ b/drivers/net/can/janz-ican3.c
@@ -274,7 +274,7 @@ static inline void ican3_set_page(struct ican3_dev *mod, unsigned int page)
  */
 
 /*
- * Recieve a message from the ICAN3 "old-style" firmware interface
+ * Receive a message from the ICAN3 "old-style" firmware interface
  *
  * LOCKING: must hold mod->lock
  *
@@ -1050,7 +1050,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
                 complete(&mod->termination_comp);
                 break;
         default:
-                dev_err(mod->dev, "recieved an unknown inquiry response\n");
+                dev_err(mod->dev, "received an unknown inquiry response\n");
                 break;
         }
 }
@@ -1058,7 +1058,7 @@ static void ican3_handle_inquiry(struct ican3_dev *mod, struct ican3_msg *msg)
 static void ican3_handle_unknown_message(struct ican3_dev *mod,
                                         struct ican3_msg *msg)
 {
-        dev_warn(mod->dev, "recieved unknown message: spec 0x%.2x length %d\n",
+        dev_warn(mod->dev, "received unknown message: spec 0x%.2x length %d\n",
                            msg->spec, le16_to_cpu(msg->len));
 }
 
@@ -1113,7 +1113,7 @@ static bool ican3_txok(struct ican3_dev *mod)
 }
 
 /*
- * Recieve one CAN frame from the hardware
+ * Receive one CAN frame from the hardware
  *
  * CONTEXT: must be called from user context
  */
diff --git a/drivers/net/can/mscan/mscan.c b/drivers/net/can/mscan/mscan.c
index 74cd880c7e0..92feac68b66 100644
--- a/drivers/net/can/mscan/mscan.c
+++ b/drivers/net/can/mscan/mscan.c
@@ -246,7 +246,7 @@ static netdev_tx_t mscan_start_xmit(struct sk_buff *skb, struct net_device *dev)
                 out_be16(&regs->tx.idr3_2, can_id);
 
                 can_id >>= 16;
-                /* EFF_FLAGS are inbetween the IDs :( */
+                /* EFF_FLAGS are between the IDs :( */
                 can_id = (can_id & 0x7) | ((can_id << 2) & 0xffe0)
                          | MSCAN_EFF_FLAGS;
         } else {
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 0a8de01d52f..a358ea9445a 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -425,7 +425,7 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
                         cf->data[3] = ecc & ECC_SEG;
                         break;
                 }
-                /* Error occured during transmission? */
+                /* Error occurred during transmission? */
                 if ((ecc & ECC_DIR) == 0)
                         cf->data[2] |= CAN_ERR_PROT_TX;
         }
diff --git a/drivers/net/can/softing/softing.h b/drivers/net/can/softing/softing.h
index 7ec9f4db3d5..afd7d85b691 100644
--- a/drivers/net/can/softing/softing.h
+++ b/drivers/net/can/softing/softing.h
@@ -22,7 +22,7 @@ struct softing_priv {
         struct softing *card;
         struct {
                 int pending;
-                /* variables wich hold the circular buffer */
+                /* variables which hold the circular buffer */
                 int echo_put;
                 int echo_get;
         } tx;
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index aeea9f9ff6e..7a70709d560 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -218,7 +218,7 @@ static int softing_handle_1(struct softing *card)
         ptr = buf;
         cmd = *ptr++;
         if (cmd == 0xff)
-                /* not quite usefull, probably the card has got out */
+                /* not quite useful, probably the card has got out */
                 return 0;
         netdev = card->net[0];
         if (cmd & CMD_BUS2)
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index 4d07f1ee716..f7bbde9eb2c 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -663,7 +663,7 @@ static int ti_hecc_error(struct net_device *ndev, int int_status,
         struct can_frame *cf;
         struct sk_buff *skb;
 
-        /* propogate the error condition to the can stack */
+        /* propagate the error condition to the can stack */
         skb = alloc_can_err_skb(ndev, &cf);
         if (!skb) {
                 if (printk_ratelimit())
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index e75f1a87697..a72c7bfb409 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -386,7 +386,7 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
                         break;
                 }
 
-                /* Error occured during transmission? */
+                /* Error occurred during transmission? */
                 if ((ecc & SJA1000_ECC_DIR) == 0)
                         cf->data[2] |= CAN_ERR_PROT_TX;
 
diff --git a/drivers/net/can/usb/esd_usb2.c b/drivers/net/can/usb/esd_usb2.c
index dc53c831ea9..eb8b0e60028 100644
--- a/drivers/net/can/usb/esd_usb2.c
+++ b/drivers/net/can/usb/esd_usb2.c
@@ -284,7 +284,7 @@ static void esd_usb2_rx_event(struct esd_usb2_net_priv *priv,
                                 break;
                         }
 
-                        /* Error occured during transmission? */
+                        /* Error occurred during transmission? */
                         if (!(ecc & SJA1000_ECC_DIR))
                                 cf->data[2] |= CAN_ERR_PROT_TX;
 
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 3437613f045..143a28c666a 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -51,7 +51,7 @@
  * TX has 4 queues. currently these queues are used in a round-robin
  * fashion for load balancing. They can also be used for QoS. for that
  * to work, however, QoS information needs to be exposed down to the driver
- * level so that subqueues get targetted to particular transmit rings.
+ * level so that subqueues get targeted to particular transmit rings.
  * alternatively, the queues can be configured via use of the all-purpose
  * ioctl.
  *
@@ -5165,7 +5165,7 @@ err_out_free_res:
         pci_release_regions(pdev);
 
 err_write_cacheline:
-        /* Try to restore it in case the error occured after we
+        /* Try to restore it in case the error occurred after we
          * set it.
          */
         pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, orig_cacheline_size);
diff --git a/drivers/net/cassini.h b/drivers/net/cassini.h
index faf4746a0f3..b361424d5f5 100644
--- a/drivers/net/cassini.h
+++ b/drivers/net/cassini.h
@@ -772,7 +772,7 @@
 #define    RX_DEBUG_INTR_WRITE_PTR_MASK    0xC0000000 /* interrupt write pointer
                                                          of the interrupt queue */
 
-/* flow control frames are emmitted using two PAUSE thresholds:
+/* flow control frames are emitted using two PAUSE thresholds:
  * XOFF PAUSE uses pause time value pre-programmed in the Send PAUSE MAC reg
  * XON PAUSE uses a pause time of 0. granularity of threshold is 64bytes.
  * PAUSE thresholds defined in terms of FIFO occupancy and may be translated
diff --git a/drivers/net/chelsio/mv88e1xxx.c b/drivers/net/chelsio/mv88e1xxx.c
index 809047a99e9..71018a4fdf1 100644
--- a/drivers/net/chelsio/mv88e1xxx.c
+++ b/drivers/net/chelsio/mv88e1xxx.c
@@ -41,7 +41,7 @@ static void mdio_clear_bit(struct cphy *cphy, int reg, u32 bitval)
  *
  * PARAMS: cphy     - Pointer to PHY instance data.
  *
- * RETURN:  0 - Successfull reset.
+ * RETURN:  0 - Successful reset.
  *         -1 - Timeout.
  */
 static int mv88e1xxx_reset(struct cphy *cphy, int wait)
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c
index 7dbb16d36ff..40c7b93abab 100644
--- a/drivers/net/chelsio/pm3393.c
+++ b/drivers/net/chelsio/pm3393.c
@@ -293,7 +293,7 @@ static int pm3393_enable_port(struct cmac *cmac, int which)
         pm3393_enable(cmac, which);
 
         /*
-         * XXX This should be done by the PHY and preferrably not at all.
+         * XXX This should be done by the PHY and preferably not at all.
          * The PHY doesn't give us link status indication on its own so have
          * the link management code query it instead.
          */
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
index f778b15ad3f..8754d447304 100644
--- a/drivers/net/chelsio/sge.c
+++ b/drivers/net/chelsio/sge.c
@@ -1662,7 +1662,7 @@ irqreturn_t t1_interrupt(int irq, void *data)
  * The code figures out how many entries the sk_buff will require in the
  * cmdQ and updates the cmdQ data structure with the state once the enqueue
  * has complete. Then, it doesn't access the global structure anymore, but
- * uses the corresponding fields on the stack. In conjuction with a spinlock
+ * uses the corresponding fields on the stack. In conjunction with a spinlock
  * around that code, we can make the function reentrant without holding the
  * lock when we actually enqueue (which might be expensive, especially on
  * architectures with IO MMUs).
diff --git a/drivers/net/chelsio/vsc7326.c b/drivers/net/chelsio/vsc7326.c
index 106a590f0d9..b0cb388f5e1 100644
--- a/drivers/net/chelsio/vsc7326.c
+++ b/drivers/net/chelsio/vsc7326.c
@@ -566,7 +566,7 @@ static int mac_disable(struct cmac *mac, int which)
         for (i = 0; i <= 0x3a; ++i)
                 vsc_write(mac->adapter, CRA(4, port, i), 0);
 
-        /* Clear sofware counters */
+        /* Clear software counters */
         memset(&mac->stats, 0, sizeof(struct cmac_statistics));
 
         return 0;
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 80c2feeefec..9d267d3a689 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -1383,7 +1383,7 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
         spin_lock(&np->lock); /* Preempt protection */
         switch (cmd) {
                 /* The ioctls below should be considered obsolete but are */
-                /* still present for compatability with old scripts/apps  */
+                /* still present for compatibility with old scripts/apps  */
                 case SET_ETH_SPEED_10:                  /* 10 Mbps */
                         e100_set_speed(dev, 10);
                         break;
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index f9f6645b2e6..bfa2d56af1e 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -199,7 +199,7 @@ static inline void refill_rspq(struct adapter *adapter,
  *      need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
  *      Returns true if the platform needs sk_buff unmapping.  The compiler
- *      optimizes away unecessary code if this returns true.
+ *      optimizes away unnecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index d55db6b38e7..c688421da9c 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -1386,11 +1386,11 @@ struct intr_info {
  *      @reg: the interrupt status register to process
  *      @mask: a mask to apply to the interrupt status
  *      @acts: table of interrupt actions
- *      @stats: statistics counters tracking interrupt occurences
+ *      @stats: statistics counters tracking interrupt occurrences
  *
  *      A table driven interrupt handler that applies a set of masks to an
  *      interrupt status word and performs the corresponding actions if the
- *      interrupts described by the mask have occured.  The actions include
+ *      interrupts described by the mask have occurred.  The actions include
  *      optionally printing a warning or alert message, and optionally
  *      incrementing a stat counter.  The table is terminated by an entry
  *      specifying mask 0.  Returns the number of fatal interrupt conditions.
@@ -2783,7 +2783,7 @@ static void init_mtus(unsigned short mtus[])
 {
         /*
          * See draft-mathis-plpmtud-00.txt for the values.  The min is 88 so
-         * it can accomodate max size TCP/IP headers when SACK and timestamps
+         * it can accommodate max size TCP/IP headers when SACK and timestamps
          * are enabled and still have at least 8 bytes of payload.
          */
         mtus[0] = 88;
diff --git a/drivers/net/cxgb4/t4_hw.c b/drivers/net/cxgb4/t4_hw.c
index b9fd8a6f2cc..d1ec111aebd 100644
--- a/drivers/net/cxgb4/t4_hw.c
+++ b/drivers/net/cxgb4/t4_hw.c
@@ -883,7 +883,7 @@ struct intr_info {
  *
  *      A table driven interrupt handler that applies a set of masks to an
  *      interrupt status word and performs the corresponding actions if the
- *      interrupts described by the mask have occured.  The actions include
+ *      interrupts described by the mask have occurred.  The actions include
  *      optionally emitting a warning or alert message.  The table is terminated
  *      by an entry specifying mask 0.  Returns the number of fatal interrupt
  *      conditions.
diff --git a/drivers/net/cxgb4vf/cxgb4vf_main.c b/drivers/net/cxgb4vf/cxgb4vf_main.c
index 6aad64df4dc..4661cbbd9bd 100644
--- a/drivers/net/cxgb4vf/cxgb4vf_main.c
+++ b/drivers/net/cxgb4vf/cxgb4vf_main.c
@@ -2738,7 +2738,7 @@ static int __devinit cxgb4vf_pci_probe(struct pci_dev *pdev,
         cfg_queues(adapter);
 
         /*
-         * Print a short notice on the existance and configuration of the new
+         * Print a short notice on the existence and configuration of the new
          * VF network device ...
          */
         for_each_port(adapter, pidx) {
diff --git a/drivers/net/cxgb4vf/sge.c b/drivers/net/cxgb4vf/sge.c
index e0b3d1bc2fd..bb65121f581 100644
--- a/drivers/net/cxgb4vf/sge.c
+++ b/drivers/net/cxgb4vf/sge.c
@@ -224,8 +224,8 @@ static inline bool is_buf_mapped(const struct rx_sw_desc *sdesc)
 /**
  *      need_skb_unmap - does the platform need unmapping of sk_buffs?
  *
- *      Returns true if the platfrom needs sk_buff unmapping.  The compiler
- *      optimizes away unecessary code if this returns true.
+ *      Returns true if the platform needs sk_buff unmapping.  The compiler
+ *      optimizes away unnecessary code if this returns true.
  */
 static inline int need_skb_unmap(void)
 {
@@ -267,7 +267,7 @@ static inline unsigned int fl_cap(const struct sge_fl *fl)
  *
  *      Tests specified Free List to see whether the number of buffers
  *      available to the hardware has falled below our "starvation"
- *      threshhold.
+ *      threshold.
  */
 static inline bool fl_starving(const struct sge_fl *fl)
 {
@@ -1149,7 +1149,7 @@ int t4vf_eth_xmit(struct sk_buff *skb, struct net_device *dev)
         if (unlikely(credits < ETHTXQ_STOP_THRES)) {
                 /*
                  * After we're done injecting the Work Request for this
-                 * packet, we'll be below our "stop threshhold" so stop the TX
+                 * packet, we'll be below our "stop threshold" so stop the TX
                  * Queue now and schedule a request for an SGE Egress Queue
                  * Update message.  The queue will get started later on when
                  * the firmware processes this Work Request and sends us an
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index baca6bfcb08..807b6bb200e 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -94,14 +94,14 @@ MODULE_VERSION(EMAC_MODULE_VERSION);
 static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
 
 /* Configuration items */
-#define EMAC_DEF_PASS_CRC               (0) /* Do not pass CRC upto frames */
+#define EMAC_DEF_PASS_CRC               (0) /* Do not pass CRC up to frames */
 #define EMAC_DEF_QOS_EN                 (0) /* EMAC proprietary QoS disabled */
 #define EMAC_DEF_NO_BUFF_CHAIN          (0) /* No buffer chain */
 #define EMAC_DEF_MACCTRL_FRAME_EN       (0) /* Discard Maccontrol frames */
 #define EMAC_DEF_SHORT_FRAME_EN         (0) /* Discard short frames */
 #define EMAC_DEF_ERROR_FRAME_EN         (0) /* Discard error frames */
-#define EMAC_DEF_PROM_EN                (0) /* Promiscous disabled */
-#define EMAC_DEF_PROM_CH                (0) /* Promiscous channel is 0 */
+#define EMAC_DEF_PROM_EN                (0) /* Promiscuous disabled */
+#define EMAC_DEF_PROM_CH                (0) /* Promiscuous channel is 0 */
 #define EMAC_DEF_BCAST_EN               (1) /* Broadcast enabled */
 #define EMAC_DEF_BCAST_CH               (0) /* Broadcast channel is 0 */
 #define EMAC_DEF_MCAST_EN               (1) /* Multicast enabled */
@@ -1013,7 +1013,7 @@ static void emac_rx_handler(void *token, int len, int status)
                 return;
         }
 
-        /* recycle on recieve error */
+        /* recycle on receive error */
         if (status < 0) {
                 ndev->stats.rx_errors++;
                 goto recycle;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index f4d0922ec65..dd70738eb2f 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -160,7 +160,7 @@ static int e1000_get_settings(struct net_device *netdev,
                                                    &adapter->link_duplex);
                 ecmd->speed = adapter->link_speed;
 
-                /* unfortunatly FULL_DUPLEX != DUPLEX_FULL
+                /* unfortunately FULL_DUPLEX != DUPLEX_FULL
                  *          and HALF_DUPLEX != DUPLEX_HALF */
 
                 if (adapter->link_duplex == FULL_DUPLEX)
diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h
index c70b23d5228..5c9a8403668 100644
--- a/drivers/net/e1000/e1000_hw.h
+++ b/drivers/net/e1000/e1000_hw.h
@@ -1026,7 +1026,7 @@ extern void __iomem *ce4100_gbe_mdio_base_virt;
 
 #define E1000_KUMCTRLSTA 0x00034        /* MAC-PHY interface - RW */
 #define E1000_MDPHYA     0x0003C        /* PHY address - RW */
-#define E1000_MANC2H     0x05860        /* Managment Control To Host - RW */
+#define E1000_MANC2H     0x05860        /* Management Control To Host - RW */
 #define E1000_SW_FW_SYNC 0x05B5C        /* Software-Firmware Synchronization - RW */
 
 #define E1000_GCR       0x05B00 /* PCI-Ex Control */
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index bfab14092d2..477e066a1cf 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -205,7 +205,7 @@ static struct pci_driver e1000_driver = {
         .probe    = e1000_probe,
         .remove   = __devexit_p(e1000_remove),
 #ifdef CONFIG_PM
-        /* Power Managment Hooks */
+        /* Power Management Hooks */
         .suspend  = e1000_suspend,
         .resume   = e1000_resume,
 #endif
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index a39d4a4d871..506a0a0043b 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4886,7 +4886,7 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
         if (skb->protocol == htons(ETH_P_IP))
                 tx_flags |= E1000_TX_FLAGS_IPV4;
 
-        /* if count is 0 then mapping error has occured */
+        /* if count is 0 then mapping error has occurred */
         count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
         if (count) {
                 e1000_tx_queue(adapter, tx_flags, count);
diff --git a/drivers/net/enc28j60_hw.h b/drivers/net/enc28j60_hw.h
index 1a0b20969f8..25b41de49f0 100644
--- a/drivers/net/enc28j60_hw.h
+++ b/drivers/net/enc28j60_hw.h
@@ -303,7 +303,7 @@
 /* maximum ethernet frame length */
 #define MAX_FRAMELEN            1518
 
-/* Prefered half duplex: LEDA: Link status LEDB: Rx/Tx activity */
+/* Preferred half duplex: LEDA: Link status LEDB: Rx/Tx activity */
 #define ENC28J60_LAMPS_MODE     0x3476
 
 #endif
diff --git a/drivers/net/eth16i.c b/drivers/net/eth16i.c
index fb717be511f..12d28e9d0cb 100644
--- a/drivers/net/eth16i.c
+++ b/drivers/net/eth16i.c
@@ -13,7 +13,7 @@
    This driver supports following cards :
         - ICL EtherTeam 16i
         - ICL EtherTeam 32 EISA
-          (Uses true 32 bit transfers rather than 16i compability mode)
+          (Uses true 32 bit transfers rather than 16i compatibility mode)
 
    Example Module usage:
         insmod eth16i.o io=0x2a0 mediatype=bnc
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index db0290f05bd..a83dd312c3a 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -542,7 +542,7 @@ static irqreturn_t ethoc_interrupt(int irq, void *dev_id)
 
         /* Figure out what triggered the interrupt...
          * The tricky bit here is that the interrupt source bits get
-         * set in INT_SOURCE for an event irregardless of whether that
+         * set in INT_SOURCE for an event regardless of whether that
          * event is masked or not.  Thus, in order to figure out what
          * triggered the interrupt, we need to remove the sources
          * for all events that are currently masked.  This behaviour
diff --git a/drivers/net/fec.h b/drivers/net/fec.h
index ace318df4c8..8b2c6d797e6 100644
--- a/drivers/net/fec.h
+++ b/drivers/net/fec.h
@@ -97,11 +97,11 @@ struct bufdesc {
  *      The following definitions courtesy of commproc.h, which where
  *      Copyright (c) 1997 Dan Malek (dmalek@jlc.net).
  */
-#define BD_SC_EMPTY     ((ushort)0x8000)        /* Recieve is empty */
+#define BD_SC_EMPTY     ((ushort)0x8000)        /* Receive is empty */
 #define BD_SC_READY     ((ushort)0x8000)        /* Transmit is ready */
 #define BD_SC_WRAP      ((ushort)0x2000)        /* Last buffer descriptor */
 #define BD_SC_INTRPT    ((ushort)0x1000)        /* Interrupt on change */
-#define BD_SC_CM        ((ushort)0x0200)        /* Continous mode */
+#define BD_SC_CM        ((ushort)0x0200)        /* Continuous mode */
 #define BD_SC_ID        ((ushort)0x0100)        /* Rec'd too many idles */
 #define BD_SC_P         ((ushort)0x0100)        /* xmt preamble */
 #define BD_SC_BR        ((ushort)0x0020)        /* Break received */
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 7b92897ca66..d5ab4dad505 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -440,7 +440,7 @@ union ring_type {
 #define NV_RX3_VLAN_TAG_PRESENT (1<<16)
 #define NV_RX3_VLAN_TAG_MASK    (0x0000FFFF)
 
-/* Miscelaneous hardware related defines: */
+/* Miscellaneous hardware related defines: */
 #define NV_PCI_REGSZ_VER1       0x270
 #define NV_PCI_REGSZ_VER2       0x2d4
 #define NV_PCI_REGSZ_VER3       0x604
@@ -1488,7 +1488,7 @@ static int phy_init(struct net_device *dev)
                 }
         }
 
-        /* some phys clear out pause advertisment on reset, set it back */
+        /* some phys clear out pause advertisement on reset, set it back */
         mii_rw(dev, np->phyaddr, MII_ADVERTISE, reg);
 
         /* restart auto negotiation, power down phy */
@@ -2535,7 +2535,7 @@ static void nv_tx_timeout(struct net_device *dev)
         else
                 nv_tx_done_optimized(dev, np->tx_ring_size);
 
-        /* save current HW postion */
+        /* save current HW position */
         if (np->tx_change_owner)
                 put_tx.ex = np->tx_change_owner->first_tx_desc;
         else
@@ -4053,7 +4053,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
         } else if (ecmd->autoneg == AUTONEG_DISABLE) {
                 /* Note: autonegotiation disable, speed 1000 intentionally
-                 * forbidden - noone should need that. */
+                 * forbidden - no one should need that. */
 
                 if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
                         return -EINVAL;
@@ -4103,7 +4103,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
                         adv |= ADVERTISE_100HALF;
                 if (ecmd->advertising & ADVERTISED_100baseT_Full)
                         adv |= ADVERTISE_100FULL;
-                if (np->pause_flags & NV_PAUSEFRAME_RX_REQ)  /* for rx we set both advertisments but disable tx pause */
+                if (np->pause_flags & NV_PAUSEFRAME_RX_REQ)  /* for rx we set both advertisements but disable tx pause */
                         adv |=  ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
                 if (np->pause_flags & NV_PAUSEFRAME_TX_REQ)
                         adv |=  ADVERTISE_PAUSE_ASYM;
@@ -4148,7 +4148,7 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
                 if (ecmd->speed == SPEED_100 && ecmd->duplex == DUPLEX_FULL)
                         adv |= ADVERTISE_100FULL;
                 np->pause_flags &= ~(NV_PAUSEFRAME_AUTONEG|NV_PAUSEFRAME_RX_ENABLE|NV_PAUSEFRAME_TX_ENABLE);
-                if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) {/* for rx we set both advertisments but disable tx pause */
+                if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) {/* for rx we set both advertisements but disable tx pause */
                         adv |=  ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
                         np->pause_flags |= NV_PAUSEFRAME_RX_ENABLE;
                 }
@@ -4449,7 +4449,7 @@ static int nv_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam*
 
                 adv = mii_rw(dev, np->phyaddr, MII_ADVERTISE, MII_READ);
                 adv &= ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-                if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisments but disable tx pause */
+                if (np->pause_flags & NV_PAUSEFRAME_RX_REQ) /* for rx we set both advertisements but disable tx pause */
                         adv |=  ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
                 if (np->pause_flags & NV_PAUSEFRAME_TX_REQ)
                         adv |=  ADVERTISE_PAUSE_ASYM;
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index ec5d595ce2e..b2fe7edefad 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -1043,7 +1043,7 @@ enum gfar_errata {
 };
 
 /* Struct stolen almost completely (and shamelessly) from the FCC enet source
- * (Ok, that's not so true anymore, but there is a family resemblence)
+ * (Ok, that's not so true anymore, but there is a family resemblance)
  * The GFAR buffer descriptors track the ring buffers.  The rx_bd_base
  * and tx_bd_base always point to the currently available buffer.
  * The dirty_tx tracks the current buffer that is being sent by the
diff --git a/drivers/net/hamradio/Makefile b/drivers/net/hamradio/Makefile
index 9def86704a9..10409607002 100644
--- a/drivers/net/hamradio/Makefile
+++ b/drivers/net/hamradio/Makefile
@@ -3,7 +3,7 @@
 #
 #
 # 19971130      Moved the amateur radio related network drivers from 
-#               drivers/net/ to drivers/hamradio for easier maintainance.
+#               drivers/net/ to drivers/hamradio for easier maintenance.
 #               Joerg Reuter DL1BKE <jreuter@yaina.de>
 #
 # 20000806      Rewritten to use lists instead of if-statements.
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
index 7d9ced0738c..96a98d2ff15 100644
--- a/drivers/net/hamradio/yam.c
+++ b/drivers/net/hamradio/yam.c
@@ -30,7 +30,7 @@
  *   0.1 F1OAT 07.06.98  Add timer polling routine for channel arbitration
  *   0.2 F6FBB 08.06.98  Added delay after FPGA programming
  *   0.3 F6FBB 29.07.98  Delayed PTT implementation for dupmode=2
- *   0.4 F6FBB 30.07.98  Added TxTail, Slottime and Persistance
+ *   0.4 F6FBB 30.07.98  Added TxTail, Slottime and Persistence
  *   0.5 F6FBB 01.08.98  Shared IRQs, /proc/net and network statistics
  *   0.6 F6FBB 25.08.98  Added 1200Bds format
  *   0.7 F6FBB 12.09.98  Added to the kernel configuration
diff --git a/drivers/net/hp100.c b/drivers/net/hp100.c
index 8e2c4601b5f..8e10d2f6a5a 100644
--- a/drivers/net/hp100.c
+++ b/drivers/net/hp100.c
@@ -180,8 +180,8 @@ struct hp100_private {
 
         u_int *page_vaddr_algn; /* Aligned virtual address of allocated page */
         u_long whatever_offset; /* Offset to bus/phys/dma address */
-        int rxrcommit;          /* # Rx PDLs commited to adapter */
-        int txrcommit;          /* # Tx PDLs commited to adapter */
+        int rxrcommit;          /* # Rx PDLs committed to adapter */
+        int txrcommit;          /* # Tx PDLs committed to adapter */
 };
 
 /*
@@ -716,7 +716,7 @@ static int __devinit hp100_probe1(struct net_device *dev, int ioaddr,
          * implemented/tested only with the lassen chip anyway... */
         if (lp->mode == 1) {    /* busmaster */
                 dma_addr_t page_baddr;
-                /* Get physically continous memory for TX & RX PDLs    */
+                /* Get physically continuous memory for TX & RX PDLs    */
                 /* Conversion to new PCI API :
                  * Pages are always aligned and zeroed, no need to it ourself.
                  * Doc says should be OK for EISA bus as well - Jean II */
@@ -1596,7 +1596,7 @@ drop:
 
 /* clean_txring checks if packets have been sent by the card by reading
  * the TX_PDL register from the performance page and comparing it to the
- * number of commited packets. It then frees the skb's of the packets that
+ * number of committed packets. It then frees the skb's of the packets that
  * obviously have been sent to the network.
  *
  * Needs the PERFORMANCE page selected.
@@ -1617,7 +1617,7 @@ static void hp100_clean_txring(struct net_device *dev)
 
 #ifdef HP100_DEBUG
         if (donecount > MAX_TX_PDL)
-                printk("hp100: %s: Warning: More PDLs transmitted than commited to card???\n", dev->name);
+                printk("hp100: %s: Warning: More PDLs transmitted than committed to card???\n", dev->name);
 #endif
 
         for (; 0 != donecount; donecount--) {
@@ -1765,7 +1765,7 @@ drop:
  * Receive Function (Non-Busmaster mode)
  * Called when an "Receive Packet" interrupt occurs, i.e. the receive
  * packet counter is non-zero.
- * For non-busmaster, this function does the whole work of transfering
+ * For non-busmaster, this function does the whole work of transferring
  * the packet to the host memory and then up to higher layers via skb
  * and netif_rx.
  */
@@ -1892,7 +1892,7 @@ static void hp100_rx_bm(struct net_device *dev)
                 /* RX_PKT_CNT states how many PDLs are currently formatted and available to
                  * the cards BM engine */
         if ((hp100_inw(RX_PKT_CNT) & 0x00ff) >= lp->rxrcommit) {
-                printk("hp100: %s: More packets received than commited? RX_PKT_CNT=0x%x, commit=0x%x\n",
+                printk("hp100: %s: More packets received than committed? RX_PKT_CNT=0x%x, commit=0x%x\n",
                                      dev->name, hp100_inw(RX_PKT_CNT) & 0x00ff,
                                      lp->rxrcommit);
                 return;
@@ -2256,7 +2256,7 @@ static irqreturn_t hp100_interrupt(int irq, void *dev_id)
                 if (lp->mode != 1)      /* non busmaster */
                         hp100_rx(dev);
                 else if (!(val & HP100_RX_PDL_FILL_COMPL)) {
-                        /* Shouldnt happen - maybe we missed a RX_PDL_FILL Interrupt?  */
+                        /* Shouldn't happen - maybe we missed a RX_PDL_FILL Interrupt?  */
                         hp100_rx_bm(dev);
                 }
         }
diff --git a/drivers/net/hp100.h b/drivers/net/hp100.h
index e6ca128a556..b60e96fe38b 100644
--- a/drivers/net/hp100.h
+++ b/drivers/net/hp100.h
@@ -109,7 +109,7 @@
 #define HP100_REG_MAC_CFG_2     0x0d    /* RW: (8) Misc MAC functions        */
 #define HP100_REG_MAC_CFG_3     0x0e    /* RW: (8) Misc MAC functions */
 #define HP100_REG_MAC_CFG_4     0x0f    /* R:  (8) Misc MAC states */
-#define HP100_REG_DROPPED       0x10    /* R:  (16),11:0 Pkts cant fit in mem */
+#define HP100_REG_DROPPED       0x10    /* R:  (16),11:0 Pkts can't fit in mem */
 #define HP100_REG_CRC           0x12    /* R:  (8) Pkts with CRC             */
 #define HP100_REG_ABORT         0x13    /* R:  (8) Aborted Tx pkts           */
 #define HP100_REG_TRAIN_REQUEST 0x14    /* RW: (16) Endnode MAC register. */
diff --git a/drivers/net/ibm_newemac/tah.c b/drivers/net/ibm_newemac/tah.c
index 8ead6a96aba..5f51bf7c9dc 100644
--- a/drivers/net/ibm_newemac/tah.c
+++ b/drivers/net/ibm_newemac/tah.c
@@ -60,7 +60,7 @@ void tah_reset(struct platform_device *ofdev)
                 printk(KERN_ERR "%s: reset timeout\n",
                         ofdev->dev.of_node->full_name);
 
-        /* 10KB TAH TX FIFO accomodates the max MTU of 9000 */
+        /* 10KB TAH TX FIFO accommodates the max MTU of 9000 */
         out_be32(&p->mr,
                  TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
                  TAH_MR_DIG);
diff --git a/drivers/net/ibmlana.c b/drivers/net/ibmlana.c
index 94d9969ec0b..8ff68ae6b52 100644
--- a/drivers/net/ibmlana.c
+++ b/drivers/net/ibmlana.c
@@ -53,7 +53,7 @@ History:
         still work with 2.0.x....
   Jan 28th, 2000
         in Linux 2.2.13, the version.h file mysteriously didn't get
-        included.  Added a workaround for this.  Futhermore, it now
+        included.  Added a workaround for this.  Furthermore, it now
         not only compiles as a modules ;-)
   Jan 30th, 2000
         newer kernels automatically probe more than one board, so the
@@ -481,7 +481,7 @@ static void InitBoard(struct net_device *dev)
         if ((dev->flags & IFF_ALLMULTI) || netdev_mc_count(dev) > camcnt)
                 rcrval |= RCREG_AMC;
 
-        /* promiscous mode ? */
+        /* promiscuous mode ? */
 
         if (dev->flags & IFF_PROMISC)
                 rcrval |= RCREG_PRO;
diff --git a/drivers/net/ibmlana.h b/drivers/net/ibmlana.h
index aa3ddbdee4b..accd5efc9c8 100644
--- a/drivers/net/ibmlana.h
+++ b/drivers/net/ibmlana.h
@@ -90,7 +90,7 @@ typedef struct {
 #define RCREG_ERR        0x8000 /* accept damaged and collided pkts */
 #define RCREG_RNT        0x4000 /* accept packets that are < 64     */
 #define RCREG_BRD        0x2000 /* accept broadcasts                */
-#define RCREG_PRO        0x1000 /* promiscous mode                  */
+#define RCREG_PRO        0x1000 /* promiscuous mode                  */
 #define RCREG_AMC        0x0800 /* accept all multicasts            */
 #define RCREG_LB_NONE    0x0000 /* no loopback                      */
 #define RCREG_LB_MAC     0x0200 /* MAC loopback                     */
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 90c5e01e923..ce8255fc3c5 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -181,7 +181,7 @@ s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
  *  address and must override the actual permanent MAC address.  If an
  *  alternate MAC address is fopund it is saved in the hw struct and
  *  prgrammed into RAR0 and the cuntion returns success, otherwise the
- *  fucntion returns an error.
+ *  function returns an error.
  **/
 s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
 {
@@ -982,7 +982,7 @@ out:
 }
 
 /**
- *  igb_get_speed_and_duplex_copper - Retreive current speed/duplex
+ *  igb_get_speed_and_duplex_copper - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
  *  @speed: stores the current speed
  *  @duplex: stores the current duplex
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index 6694bf3e5ad..d639706eb3f 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -1421,7 +1421,7 @@ out:
 }
 
 /**
- *  igb_check_downshift - Checks whether a downshift in speed occured
+ *  igb_check_downshift - Checks whether a downshift in speed occurred
  *  @hw: pointer to the HW structure
  *
  *  Success returns 0, Failure returns 1
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3d850af0cdd..0dfd1b93829 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -200,7 +200,7 @@ static struct pci_driver igb_driver = {
         .probe    = igb_probe,
         .remove   = __devexit_p(igb_remove),
 #ifdef CONFIG_PM
-        /* Power Managment Hooks */
+        /* Power Management Hooks */
         .suspend  = igb_suspend,
         .resume   = igb_resume,
 #endif
@@ -2292,7 +2292,7 @@ static void igb_init_hw_timer(struct igb_adapter *adapter)
                 /**
                  * Scale the NIC clock cycle by a large factor so that
                  * relatively small clock corrections can be added or
-                 * substracted at each clock tick. The drawbacks of a large
+                 * subtracted at each clock tick. The drawbacks of a large
                  * factor are a) that the clock register overflows more quickly
                  * (not such a big deal) and b) that the increment per tick has
                  * to fit into 24 bits.  As a result we need to use a shift of
@@ -3409,7 +3409,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
                 } else {
                         /*
                          * Write addresses to the MTA, if the attempt fails
-                         * then we should just turn on promiscous mode so
+                         * then we should just turn on promiscuous mode so
                          * that we can at least receive multicast traffic
                          */
                         count = igb_write_mc_addr_list(netdev);
@@ -3423,7 +3423,7 @@ static void igb_set_rx_mode(struct net_device *netdev)
                 /*
                  * Write addresses to available RAR registers, if there is not
                  * sufficient space to store all the addresses then enable
-                 * unicast promiscous mode
+                 * unicast promiscuous mode
                  */
                 count = igb_write_uc_addr_list(netdev);
                 if (count < 0) {
@@ -4317,7 +4317,7 @@ netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
 
         /*
          * count reflects descriptors mapped, if 0 or less then mapping error
-         * has occured and we need to rewind the descriptor queue
+         * has occurred and we need to rewind the descriptor queue
          */
         count = igb_tx_map_adv(tx_ring, skb, first);
         if (!count) {
@@ -5352,8 +5352,8 @@ static void igb_msg_task(struct igb_adapter *adapter)
  *  The unicast table address is a register array of 32-bit registers.
  *  The table is meant to be used in a way similar to how the MTA is used
  *  however due to certain limitations in the hardware it is necessary to
- *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous
- *  enable bit to allow vlan tag stripping when promiscous mode is enabled
+ *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ *  enable bit to allow vlan tag stripping when promiscuous mode is enabled
  **/
 static void igb_set_uta(struct igb_adapter *adapter)
 {
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 6ccc32fd733..1d04ca6fdae 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -2227,7 +2227,7 @@ static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
 
         /*
          * count reflects descriptors mapped, if 0 then mapping error
-         * has occured and we need to rewind the descriptor queue
+         * has occurred and we need to rewind the descriptor queue
          */
         count = igbvf_tx_map_adv(adapter, tx_ring, skb, first);
 
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index a5b0f0e194b..58cd3202b48 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -486,14 +486,14 @@ static int ipg_config_autoneg(struct net_device *dev)
         phyctrl = ipg_r8(PHY_CTRL);
         mac_ctrl_val = ipg_r32(MAC_CTRL);
 
-        /* Set flags for use in resolving auto-negotation, assuming
+        /* Set flags for use in resolving auto-negotiation, assuming
          * non-1000Mbps, half duplex, no flow control.
          */
         fullduplex = 0;
         txflowcontrol = 0;
         rxflowcontrol = 0;
 
-        /* To accomodate a problem in 10Mbps operation,
+        /* To accommodate a problem in 10Mbps operation,
          * set a global flag if PHY running in 10Mbps mode.
          */
         sp->tenmbpsmode = 0;
@@ -846,7 +846,7 @@ static void init_tfdlist(struct net_device *dev)
 }
 
 /*
- * Free all transmit buffers which have already been transfered
+ * Free all transmit buffers which have already been transferred
  * via DMA to the IPG.
  */
 static void ipg_nic_txfree(struct net_device *dev)
@@ -920,7 +920,7 @@ static void ipg_tx_timeout(struct net_device *dev)
 
 /*
  * For TxComplete interrupts, free all transmit
- * buffers which have already been transfered via DMA
+ * buffers which have already been transferred via DMA
  * to the IPG.
  */
 static void ipg_nic_txcleanup(struct net_device *dev)
@@ -1141,13 +1141,13 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
 
                 /* Increment detailed receive error statistics. */
                 if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
-                        IPG_DEBUG_MSG("RX FIFO overrun occured.\n");
+                        IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");
 
                         sp->stats.rx_fifo_errors++;
                 }
 
                 if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
-                        IPG_DEBUG_MSG("RX runt occured.\n");
+                        IPG_DEBUG_MSG("RX runt occurred.\n");
                         sp->stats.rx_length_errors++;
                 }
 
@@ -1156,7 +1156,7 @@ static int ipg_nic_rx_check_error(struct net_device *dev)
                  */
 
                 if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
-                        IPG_DEBUG_MSG("RX alignment error occured.\n");
+                        IPG_DEBUG_MSG("RX alignment error occurred.\n");
                         sp->stats.rx_frame_errors++;
                 }
 
@@ -1421,12 +1421,12 @@ static int ipg_nic_rx(struct net_device *dev)
 
                         /* Increment detailed receive error statistics. */
                         if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFIFOOVERRUN) {
-                                IPG_DEBUG_MSG("RX FIFO overrun occured.\n");
+                                IPG_DEBUG_MSG("RX FIFO overrun occurred.\n");
                                 sp->stats.rx_fifo_errors++;
                         }
 
                         if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXRUNTFRAME) {
-                                IPG_DEBUG_MSG("RX runt occured.\n");
+                                IPG_DEBUG_MSG("RX runt occurred.\n");
                                 sp->stats.rx_length_errors++;
                         }
 
@@ -1436,7 +1436,7 @@ static int ipg_nic_rx(struct net_device *dev)
                          */
 
                         if (le64_to_cpu(rxfd->rfs) & IPG_RFS_RXALIGNMENTERROR) {
-                                IPG_DEBUG_MSG("RX alignment error occured.\n");
+                                IPG_DEBUG_MSG("RX alignment error occurred.\n");
                                 sp->stats.rx_frame_errors++;
                         }
 
@@ -1460,7 +1460,7 @@ static int ipg_nic_rx(struct net_device *dev)
                         }
                 } else {
 
-                        /* Adjust the new buffer length to accomodate the size
+                        /* Adjust the new buffer length to accommodate the size
                          * of the received frame.
                          */
                         skb_put(skb, framelen);
@@ -1488,7 +1488,7 @@ static int ipg_nic_rx(struct net_device *dev)
         }
 
         /*
-         * If there are more RFDs to proces and the allocated amount of RFD
+         * If there are more RFDs to process and the allocated amount of RFD
          * processing time has expired, assert Interrupt Requested to make
          * sure we come back to process the remaining RFDs.
          */
@@ -1886,7 +1886,7 @@ static netdev_tx_t ipg_nic_hard_start_xmit(struct sk_buff *skb,
         /* Request TxComplete interrupts at an interval defined
          * by the constant IPG_FRAMESBETWEENTXCOMPLETES.
          * Request TxComplete interrupt for every frame
-         * if in 10Mbps mode to accomodate problem with 10Mbps
+         * if in 10Mbps mode to accommodate problem with 10Mbps
          * processing.
          */
         if (sp->tenmbpsmode)
@@ -2098,7 +2098,7 @@ static int ipg_nic_change_mtu(struct net_device *dev, int new_mtu)
         struct ipg_nic_private *sp = netdev_priv(dev);
         int err;
 
-        /* Function to accomodate changes to Maximum Transfer Unit
+        /* Function to accommodate changes to Maximum Transfer Unit
          * (or MTU) of IPG NIC. Cannot use default function since
          * the default will not allow for MTU > 1500 bytes.
          */
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 92631eb6f6a..872183f29ec 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -76,7 +76,7 @@ static int  ali_ircc_probe_53(ali_chip_t *chip, chipio_t *info);
 static int  ali_ircc_init_43(ali_chip_t *chip, chipio_t *info);
 static int  ali_ircc_init_53(ali_chip_t *chip, chipio_t *info);
 
-/* These are the currently known ALi sourth-bridge chipsets, the only one difference
+/* These are the currently known ALi south-bridge chipsets, the only one difference
  * is that M1543C doesn't support HP HDSL-3600
  */
 static ali_chip_t chips[] =
@@ -1108,7 +1108,7 @@ static void ali_ircc_sir_change_speed(struct ali_ircc_cb *priv, __u32 speed)
         outb(lcr,                 iobase+UART_LCR); /* Set 8N1  */
         outb(fcr,                 iobase+UART_FCR); /* Enable FIFO's */
 
-        /* without this, the conection will be broken after come back from FIR speed,
+        /* without this, the connection will be broken after come back from FIR speed,
            but with this, the SIR connection is harder to established */
         outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), iobase+UART_MCR);
         
diff --git a/drivers/net/irda/donauboe.c b/drivers/net/irda/donauboe.c
index f81d944fc36..174cafad2c1 100644
--- a/drivers/net/irda/donauboe.c
+++ b/drivers/net/irda/donauboe.c
@@ -56,7 +56,7 @@
 /* do_probe module parameter Enable this code */
 /* Probe code is very useful for understanding how the hardware works */
 /* Use it with various combinations of TT_LEN, RX_LEN */
-/* Strongly recomended, disable if the probe fails on your machine */
+/* Strongly recommended, disable if the probe fails on your machine */
 /* and send me <james@fishsoup.dhs.org> the output of dmesg */
 #define USE_PROBE 1
 #undef  USE_PROBE
diff --git a/drivers/net/irda/donauboe.h b/drivers/net/irda/donauboe.h
index 77fcf445916..d92d54e839b 100644
--- a/drivers/net/irda/donauboe.h
+++ b/drivers/net/irda/donauboe.h
@@ -51,7 +51,7 @@
 
 /* The documentation for this chip is allegedly released         */
 /* However I have not seen it, not have I managed to contact     */
-/* anyone who has. HOWEVER the chip bears a striking resemblence */
+/* anyone who has. HOWEVER the chip bears a striking resemblance */
 /* to the IrDA controller in the Toshiba RISC TMPR3922 chip      */
 /* the documentation for this is freely available at             */
 /* http://www.madingley.org/james/resources/toshoboe/TMPR3922.pdf */
diff --git a/drivers/net/irda/girbil-sir.c b/drivers/net/irda/girbil-sir.c
index a31b8fa8aaa..96cdecff349 100644
--- a/drivers/net/irda/girbil-sir.c
+++ b/drivers/net/irda/girbil-sir.c
@@ -38,7 +38,7 @@ static int girbil_change_speed(struct sir_dev *dev, unsigned speed);
 /* Control register 1 */
 #define GIRBIL_TXEN    0x01 /* Enable transmitter */
 #define GIRBIL_RXEN    0x02 /* Enable receiver */
-#define GIRBIL_ECAN    0x04 /* Cancel self emmited data */
+#define GIRBIL_ECAN    0x04 /* Cancel self emitted data */
 #define GIRBIL_ECHO    0x08 /* Echo control characters */
 
 /* LED Current Register (0x2) */
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index e4ea61944c2..d9267cb98a2 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -370,7 +370,7 @@ static void speed_bulk_callback(struct urb *urb)
         /* urb is now available */
         //urb->status = 0; -> tested above
 
-        /* New speed and xbof is now commited in hardware */
+        /* New speed and xbof is now committed in hardware */
         self->new_speed = -1;
         self->new_xbofs = -1;
 
@@ -602,7 +602,7 @@ static void write_bulk_callback(struct urb *urb)
                         IRDA_DEBUG(1, "%s(), Changing speed now...\n", __func__);
                         irda_usb_change_speed_xbofs(self);
                 } else {
-                        /* New speed and xbof is now commited in hardware */
+                        /* New speed and xbof is now committed in hardware */
                         self->new_speed = -1;
                         self->new_xbofs = -1;
                         /* Done, waiting for next packet */
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index cc821de2c96..be52bfed66a 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -588,7 +588,7 @@ static int mcs_speed_change(struct mcs_cb *mcs)
 
         mcs_get_reg(mcs, MCS_MODE_REG, &rval);
 
-        /* MINRXPW values recomended by MosChip */
+        /* MINRXPW values recommended by MosChip */
         if (mcs->new_speed <= 115200) {
                 rval &= ~MCS_FIR;
 
@@ -799,7 +799,7 @@ static void mcs_receive_irq(struct urb *urb)
         ret = usb_submit_urb(urb, GFP_ATOMIC);
 }
 
-/* Transmit callback funtion.  */
+/* Transmit callback function.  */
 static void mcs_send_irq(struct urb *urb)
 {
         struct mcs_cb *mcs = urb->context;
@@ -811,7 +811,7 @@ static void mcs_send_irq(struct urb *urb)
                 netif_wake_queue(ndev);
 }
 
-/* Transmit callback funtion.  */
+/* Transmit callback function.  */
 static netdev_tx_t mcs_hard_xmit(struct sk_buff *skb,
                                        struct net_device *ndev)
 {
diff --git a/drivers/net/irda/nsc-ircc.c b/drivers/net/irda/nsc-ircc.c
index 559fe854d76..7a963d4e6d0 100644
--- a/drivers/net/irda/nsc-ircc.c
+++ b/drivers/net/irda/nsc-ircc.c
@@ -716,7 +716,7 @@ static int nsc_ircc_probe_338(nsc_chip_t *chip, chipio_t *info)
         int reg, com = 0;
         int pnp;
 
-        /* Read funtion enable register (FER) */
+        /* Read function enable register (FER) */
         outb(CFG_338_FER, cfg_base);
         reg = inb(cfg_base+1);
 
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
index 7ba7738759b..32fa58211fa 100644
--- a/drivers/net/irda/nsc-ircc.h
+++ b/drivers/net/irda/nsc-ircc.h
@@ -135,7 +135,7 @@
 #define LSR_TXRDY       0x20 /* Transmitter ready */
 #define LSR_TXEMP       0x40 /* Transmitter empty */
 
-#define ASCR            0x07 /* Auxillary Status and Control Register */
+#define ASCR            0x07 /* Auxiliary Status and Control Register */
 #define ASCR_RXF_TOUT   0x01 /* Rx FIFO timeout */
 #define ASCR_FEND_INF   0x02 /* Frame end bytes in rx FIFO */
 #define ASCR_S_EOT      0x04 /* Set end of transmission */
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index c192c31e4c5..001ed0a255f 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -40,7 +40,7 @@
 
 #define ICCR0_AME       (1 << 7)        /* Address match enable */
 #define ICCR0_TIE       (1 << 6)        /* Transmit FIFO interrupt enable */
-#define ICCR0_RIE       (1 << 5)        /* Recieve FIFO interrupt enable */
+#define ICCR0_RIE       (1 << 5)        /* Receive FIFO interrupt enable */
 #define ICCR0_RXE       (1 << 4)        /* Receive enable */
 #define ICCR0_TXE       (1 << 3)        /* Transmit enable */
 #define ICCR0_TUS       (1 << 2)        /* Transmit FIFO underrun select */
@@ -483,7 +483,7 @@ static irqreturn_t pxa_irda_fir_irq(int irq, void *dev_id)
         }
 
         if (icsr0 & ICSR0_EIF) {
-                /* An error in FIFO occured, or there is a end of frame */
+                /* An error in FIFO occurred, or there is a end of frame */
                 pxa_irda_fir_irq_eif(si, dev, icsr0);
         }
 
diff --git a/drivers/net/irda/smsc-ircc2.c b/drivers/net/irda/smsc-ircc2.c
index 1c1677cfea2..8800e1fe412 100644
--- a/drivers/net/irda/smsc-ircc2.c
+++ b/drivers/net/irda/smsc-ircc2.c
@@ -1582,7 +1582,7 @@ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev)
         int iobase;
         int iir, lsr;
 
-        /* Already locked comming here in smsc_ircc_interrupt() */
+        /* Already locked coming here in smsc_ircc_interrupt() */
         /*spin_lock(&self->lock);*/
 
         iobase = self->io.sir_base;
diff --git a/drivers/net/irda/via-ircc.c b/drivers/net/irda/via-ircc.c
index 67c0ad42d81..fc896854e28 100644
--- a/drivers/net/irda/via-ircc.c
+++ b/drivers/net/irda/via-ircc.c
@@ -29,7 +29,7 @@ F02 Oct/28/02: Add SB device ID for 3147 and 3177.
 
 2004-02-16: <sda@bdit.de>
 - Removed unneeded 'legacy' pci stuff.
-- Make sure SIR mode is set (hw_init()) before calling mode-dependant stuff.
+- Make sure SIR mode is set (hw_init()) before calling mode-dependent stuff.
 - On speed change from core, don't send SIR frame with new speed. 
   Use current speed and change speeds later.
 - Make module-param dongle_id actually work.
@@ -385,7 +385,7 @@ static __devinit int via_ircc_open(int i, chipio_t * info, unsigned int id)
         self->io.dongle_id = dongle_id;
 
         /* The only value we must override it the baudrate */
-        /* Maximum speeds and capabilities are dongle-dependant. */
+        /* Maximum speeds and capabilities are dongle-dependent. */
         switch( self->io.dongle_id ){
         case 0x0d:
                 self->qos.baud_rate.bits =
diff --git a/drivers/net/irda/vlsi_ir.h b/drivers/net/irda/vlsi_ir.h
index d66fab854bf..a076eb12534 100644
--- a/drivers/net/irda/vlsi_ir.h
+++ b/drivers/net/irda/vlsi_ir.h
@@ -209,7 +209,7 @@ enum vlsi_pio_irintr {
         IRINTR_ACTEN    = 0x80, /* activity interrupt enable */
         IRINTR_ACTIVITY = 0x40, /* activity monitor (traffic detected) */
         IRINTR_RPKTEN   = 0x20, /* receive packet interrupt enable*/
-        IRINTR_RPKTINT  = 0x10, /* rx-packet transfered from fifo to memory finished */
+        IRINTR_RPKTINT  = 0x10, /* rx-packet transferred from fifo to memory finished */
         IRINTR_TPKTEN   = 0x08, /* transmit packet interrupt enable */
         IRINTR_TPKTINT  = 0x04, /* last bit of tx-packet+crc shifted to ir-pulser */
         IRINTR_OE_EN    = 0x02, /* UART rx fifo overrun error interrupt enable */
@@ -739,7 +739,7 @@ typedef struct vlsi_irda_dev {
 /* the remapped error flags we use for returning from frame
  * post-processing in vlsi_process_tx/rx() after it was completed
  * by the hardware. These functions either return the >=0 number
- * of transfered bytes in case of success or the negative (-)
+ * of transferred bytes in case of success or the negative (-)
  * of the or'ed error flags.
  */
 
diff --git a/drivers/net/ixgbe/ixgbe_dcb.c b/drivers/net/ixgbe/ixgbe_dcb.c
index 41c529fac0a..686a17aadef 100644
--- a/drivers/net/ixgbe/ixgbe_dcb.c
+++ b/drivers/net/ixgbe/ixgbe_dcb.c
@@ -36,7 +36,7 @@
 /**
  * ixgbe_ieee_credits - This calculates the ieee traffic class
  * credits from the configured bandwidth percentages. Credits
- * are the smallest unit programable into the underlying
+ * are the smallest unit programmable into the underlying
  * hardware. The IEEE 802.1Qaz specification do not use bandwidth
  * groups so this is much simplified from the CEE case.
  */
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index fec4c724c37..327c8614198 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -360,7 +360,7 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
                 return DCB_NO_HW_CHG;
 
         /*
-         * Only take down the adapter if an app change occured. FCoE
+         * Only take down the adapter if an app change occurred. FCoE
          * may shuffle tx rings in this case and this can not be done
          * without a reset currently.
          */
@@ -599,7 +599,7 @@ static u8 ixgbe_dcbnl_setapp(struct net_device *netdev,
                                 break;
 
                         /* The FCoE application priority may be changed multiple
-                         * times in quick sucession with switches that build up
+                         * times in quick succession with switches that build up
                          * TLVs. To avoid creating uneeded device resets this
                          * checks the actual HW configuration and clears
                          * BIT_APP_UPCHG if a HW configuration change is not
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index f17e4a7ee73..6f8adc7f5d7 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -644,7 +644,7 @@ void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring,
  * @adapter: driver private struct
  * @index: reg idx of queue to query (0-127)
  *
- * Helper function to determine the traffic index for a paticular
+ * Helper function to determine the traffic index for a particular
  * register index.
  *
  * Returns : a tc index for use in range 0-7, or 0-3
@@ -3556,7 +3556,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
                 } else {
                         /*
                          * Write addresses to the MTA, if the attempt fails
-                         * then we should just turn on promiscous mode so
+                         * then we should just turn on promiscuous mode so
                          * that we can at least receive multicast traffic
                          */
                         hw->mac.ops.update_mc_addr_list(hw, netdev);
@@ -3567,7 +3567,7 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
                 /*
                  * Write addresses to available RAR registers, if there is not
                  * sufficient space to store all the addresses then enable
-                 * unicast promiscous mode
+                 * unicast promiscuous mode
                  */
                 count = ixgbe_write_uc_addr_list(netdev);
                 if (count < 0) {
@@ -4443,7 +4443,7 @@ static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
 }
 
 /*
- * ixgbe_set_num_queues: Allocate queues for device, feature dependant
+ * ixgbe_set_num_queues: Allocate queues for device, feature dependent
  * @adapter: board private structure to initialize
  *
  * This is the top level queue allocation routine.  The order here is very
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index f72f705f618..df5b8aa4795 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -1694,7 +1694,7 @@ static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
 }
 
 /**
- *  ixgbe_tn_check_overtemp - Checks if an overtemp occured.
+ *  ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
  *  @hw: pointer to hardware structure
  *
  *  Checks if the LASI temp alarm status was triggered due to overtemp
diff --git a/drivers/net/ixgbe/ixgbe_x540.c b/drivers/net/ixgbe/ixgbe_x540.c
index f47e93fe32b..d9323c08f5c 100644
--- a/drivers/net/ixgbe/ixgbe_x540.c
+++ b/drivers/net/ixgbe/ixgbe_x540.c
@@ -573,7 +573,7 @@ static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
  * @hw: pointer to hardware structure
  * @mask: Mask to specify which semaphore to release
  *
- * Releases the SWFW semaphore throught the SW_FW_SYNC register
+ * Releases the SWFW semaphore through the SW_FW_SYNC register
  * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
  **/
 static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
diff --git a/drivers/net/ixgbevf/ixgbevf_main.c b/drivers/net/ixgbevf/ixgbevf_main.c
index 054ab05b7c6..05fa7c85dee 100644
--- a/drivers/net/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ixgbevf/ixgbevf_main.c
@@ -1925,7 +1925,7 @@ static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
 }
 
 /*
- * ixgbevf_set_num_queues: Allocate queues for device, feature dependant
+ * ixgbevf_set_num_queues: Allocate queues for device, feature dependent
  * @adapter: board private structure to initialize
  *
  * This is the top level queue allocation routine.  The order here is very
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index efd44afeae8..f0d8346d0fa 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -321,7 +321,7 @@ static void ks8842_reset_hw(struct ks8842_adapter *adapter)
         /* RX 2 kb high watermark */
         ks8842_write16(adapter, 0, 0x1000, REG_QRFCR);
 
-        /* aggresive back off in half duplex */
+        /* aggressive back off in half duplex */
         ks8842_enable_bits(adapter, 32, 1 << 8, REG_SGCR1);
 
         /* enable no excessive collison drop */
diff --git a/drivers/net/ks8851.c b/drivers/net/ks8851.c
index 0fa4a9887ba..bcd9ba68c9f 100644
--- a/drivers/net/ks8851.c
+++ b/drivers/net/ks8851.c
@@ -141,7 +141,7 @@ static int msg_enable;
  *
  * All these calls issue SPI transactions to access the chip's registers. They
  * all require that the necessary lock is held to prevent accesses when the
- * chip is busy transfering packet data (RX/TX FIFO accesses).
+ * chip is busy transferring packet data (RX/TX FIFO accesses).
  */
 
 /**
@@ -483,7 +483,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
          *
          * This form of operation would require us to hold the SPI bus'
          * chipselect low during the entie transaction to avoid any
-         * reset to the data stream comming from the chip.
+         * reset to the data stream coming from the chip.
          */
 
         for (; rxfc != 0; rxfc--) {
@@ -634,7 +634,7 @@ static void ks8851_irq_work(struct work_struct *work)
 
 /**
  * calc_txlen - calculate size of message to send packet
- * @len: Lenght of data
+ * @len: Length of data
  *
  * Returns the size of the TXFIFO message needed to send
  * this packet.
@@ -1472,7 +1472,7 @@ static int ks8851_phy_reg(int reg)
  * @reg: The register to read.
  *
  * This call reads data from the PHY register specified in @reg. Since the
- * device does not support all the MII registers, the non-existant values
+ * device does not support all the MII registers, the non-existent values
  * are always returned as zero.
  *
  * We return zero for unsupported registers as the MII code does not check
diff --git a/drivers/net/ks8851_mll.c b/drivers/net/ks8851_mll.c
index 2e2c69b2406..61631cace91 100644
--- a/drivers/net/ks8851_mll.c
+++ b/drivers/net/ks8851_mll.c
@@ -470,7 +470,7 @@ static int msg_enable;
  *
  * All these calls issue transactions to access the chip's registers. They
  * all require that the necessary lock is held to prevent accesses when the
- * chip is busy transfering packet data (RX/TX FIFO accesses).
+ * chip is busy transferring packet data (RX/TX FIFO accesses).
  */
 
 /**
@@ -1364,7 +1364,7 @@ static int ks_phy_reg(int reg)
  * @reg: The register to read.
  *
  * This call reads data from the PHY register specified in @reg. Since the
- * device does not support all the MII registers, the non-existant values
+ * device does not support all the MII registers, the non-existent values
  * are always returned as zero.
  *
  * We return zero for unsupported registers as the MII code does not check
diff --git a/drivers/net/lib8390.c b/drivers/net/lib8390.c
index da74db4a03d..17b75e5f1b0 100644
--- a/drivers/net/lib8390.c
+++ b/drivers/net/lib8390.c
@@ -35,7 +35,7 @@
   Alexey Kuznetsov      : use the 8390's six bit hash multicast filter.
   Paul Gortmaker        : tweak ANK's above multicast changes a bit.
   Paul Gortmaker        : update packet statistics for v2.1.x
-  Alan Cox              : support arbitary stupid port mappings on the
+  Alan Cox              : support arbitrary stupid port mappings on the
                           68K Macintosh. Support >16bit I/O spaces
   Paul Gortmaker        : add kmod support for auto-loading of the 8390
                           module by all drivers that require it.
@@ -121,7 +121,7 @@ static void __NS8390_init(struct net_device *dev, int startp);
 /*
  *      SMP and the 8390 setup.
  *
- *      The 8390 isnt exactly designed to be multithreaded on RX/TX. There is
+ *      The 8390 isn't exactly designed to be multithreaded on RX/TX. There is
  *      a page register that controls bank and packet buffer access. We guard
  *      this with ei_local->page_lock. Nobody should assume or set the page other
  *      than zero when the lock is not held. Lock holders must restore page 0
diff --git a/drivers/net/lp486e.c b/drivers/net/lp486e.c
index 3698824744c..385a95311cd 100644
--- a/drivers/net/lp486e.c
+++ b/drivers/net/lp486e.c
@@ -27,7 +27,7 @@
 
         Credits:
         Thanks to Murphy Software BV for letting me write this in their time.
-        Well, actually, I get payed doing this...
+        Well, actually, I get paid doing this...
         (Also: see http://www.murphy.nl for murphy, and my homepage ~ard for
         more information on the Professional Workstation)
 
diff --git a/drivers/net/meth.h b/drivers/net/meth.h
index a78dc1ca8c2..5b145c6bad6 100644
--- a/drivers/net/meth.h
+++ b/drivers/net/meth.h
@@ -144,7 +144,7 @@ typedef struct rx_packet {
                                        /* Bits 22 through 28 are used to determine IPGR2 */
 
 #define METH_REV_SHIFT 29       /* Bits 29 through 31 are used to determine the revision */
-                                       /* 000: Inital revision */
+                                       /* 000: Initial revision */
                                        /* 001: First revision, Improved TX concatenation */
 
 
@@ -193,7 +193,7 @@ typedef struct rx_packet {
                                                 /* 1: A TX message had the INT request bit set, the packet has been sent. */
 #define METH_INT_TX_LINK_FAIL   BIT(2)  /* 0: No interrupt pending, 1: PHY has reported a link failure */
 #define METH_INT_MEM_ERROR      BIT(3)  /* 0: No interrupt pending */
-                                                /* 1: A memory error occurred durring DMA, DMA stopped, Fatal */
+                                                /* 1: A memory error occurred during DMA, DMA stopped, Fatal */
 #define METH_INT_TX_ABORT               BIT(4)  /* 0: No interrupt pending, 1: The TX aborted operation, DMA stopped, FATAL */
 #define METH_INT_RX_THRESHOLD   BIT(5)  /* 0: No interrupt pending, 1: Selected receive threshold condition Valid */
 #define METH_INT_RX_UNDERFLOW   BIT(6)  /* 0: No interrupt pending, 1: FIFO was empty, packet could not be queued */
diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c
index 9317b61a75b..9276b1b2558 100644
--- a/drivers/net/mlx4/en_main.c
+++ b/drivers/net/mlx4/en_main.c
@@ -236,7 +236,7 @@ static void *mlx4_en_add(struct mlx4_dev *dev)
                 goto err_mr;
         }
 
-        /* Configure wich ports to start according to module parameters */
+        /* Configure which ports to start according to module parameters */
         mdev->port_cnt = 0;
         mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH)
                 mdev->port_cnt++;
diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index 4f158baa024..77063f91c56 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -247,7 +247,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
                                                                priv->port);
                         if (err)
                                 en_err(priv, "Failed enabling "
-                                             "promiscous mode\n");
+                                             "promiscuous mode\n");
 
                         /* Disable port multicast filter (unconditionally) */
                         err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0,
@@ -276,7 +276,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
         }
 
         /*
-         * Not in promiscous mode
+         * Not in promiscuous mode
          */
 
         if (priv->flags & MLX4_EN_FLAG_PROMISC) {
@@ -292,14 +292,14 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
                         err = mlx4_unicast_promisc_remove(mdev->dev, priv->base_qpn,
                                                           priv->port);
                 if (err)
-                        en_err(priv, "Failed disabling promiscous mode\n");
+                        en_err(priv, "Failed disabling promiscuous mode\n");
 
                 /* Disable Multicast promisc */
                 if (priv->flags & MLX4_EN_FLAG_MC_PROMISC) {
                         err = mlx4_multicast_promisc_remove(mdev->dev, priv->base_qpn,
                                                             priv->port);
                         if (err)
-                                en_err(priv, "Failed disabling multicast promiscous mode\n");
+                                en_err(priv, "Failed disabling multicast promiscuous mode\n");
                         priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC;
                 }
 
@@ -331,7 +331,7 @@ static void mlx4_en_do_set_multicast(struct work_struct *work)
                         err = mlx4_multicast_promisc_remove(mdev->dev, priv->base_qpn,
                                                             priv->port);
                         if (err)
-                                en_err(priv, "Failed disabling multicast promiscous mode\n");
+                                en_err(priv, "Failed disabling multicast promiscuous mode\n");
                         priv->flags &= ~MLX4_EN_FLAG_MC_PROMISC;
                 }
 
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 05998ee297c..cfd50bc4916 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -706,7 +706,7 @@ int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget)
 }
 
 
-/* Calculate the last offset position that accomodates a full fragment
+/* Calculate the last offset position that accommodates a full fragment
  * (assuming fagment size = stride-align) */
 static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16 align)
 {
diff --git a/drivers/net/mlx4/en_selftest.c b/drivers/net/mlx4/en_selftest.c
index 9c91a92da70..191a8dcd8a9 100644
--- a/drivers/net/mlx4/en_selftest.c
+++ b/drivers/net/mlx4/en_selftest.c
@@ -149,7 +149,7 @@ void mlx4_en_ex_selftest(struct net_device *dev, u32 *flags, u64 *buf)
 
                 netif_carrier_off(dev);
 retry_tx:
-                /* Wait untill all tx queues are empty.
+                /* Wait until all tx queues are empty.
                  * there should not be any additional incoming traffic
                  * since we turned the carrier off */
                 msleep(200);
diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c
index 01feb8fd42a..b229acf1855 100644
--- a/drivers/net/mlx4/en_tx.c
+++ b/drivers/net/mlx4/en_tx.c
@@ -636,7 +636,7 @@ netdev_tx_t mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev)
         if (unlikely(!real_size))
                 goto tx_drop;
 
-        /* Allign descriptor to TXBB size */
+        /* Align descriptor to TXBB size */
         desc_size = ALIGN(real_size, TXBB_SIZE);
         nr_txbb = desc_size / TXBB_SIZE;
         if (unlikely(nr_txbb > MAX_DESC_TXBBS)) {
diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c
index e71372aa9cc..279521aed82 100644
--- a/drivers/net/mlx4/mcg.c
+++ b/drivers/net/mlx4/mcg.c
@@ -222,7 +222,7 @@ static int existing_steering_entry(struct mlx4_dev *dev, u8 vep_num, u8 port,
 
         /* the given qpn is listed as a promisc qpn
          * we need to add it as a duplicate to this entry
-         * for future refernce */
+         * for future references */
         list_for_each_entry(dqp, &entry->duplicates, list) {
                 if (qpn == dqp->qpn)
                         return 0; /* qp is already duplicated */
diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c
index eca7d8596f8..8856659fb43 100644
--- a/drivers/net/mlx4/port.c
+++ b/drivers/net/mlx4/port.c
@@ -172,7 +172,7 @@ int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *qpn, u8 wrap)
                 }
 
                 if (mac == (MLX4_MAC_MASK & be64_to_cpu(table->entries[i]))) {
-                        /* MAC already registered, increase refernce count */
+                        /* MAC already registered, increase references count */
                         ++table->refs[i];
                         goto out;
                 }
@@ -360,7 +360,7 @@ int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index)
                 if (table->refs[i] &&
                     (vlan == (MLX4_VLAN_MASK &
                               be32_to_cpu(table->entries[i])))) {
-                        /* Vlan already registered, increase refernce count */
+                        /* Vlan already registered, increase references count */
                         *index = i;
                         ++table->refs[i];
                         goto out;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 673dc600c89..1446de59ae5 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -3702,7 +3702,7 @@ abort:
 
 /*
  * This function determines the number of slices supported.
- * The number slices is the minumum of the number of CPUS,
+ * The number slices is the minimum of the number of CPUS,
  * the number of MSI-X irqs supported, the number of slices
  * supported by the firmware
  */
diff --git a/drivers/net/myri_sbus.c b/drivers/net/myri_sbus.c
index a761076b69c..53aeea4b536 100644
--- a/drivers/net/myri_sbus.c
+++ b/drivers/net/myri_sbus.c
@@ -1009,7 +1009,7 @@ static int __devinit myri_sbus_probe(struct platform_device *op)
 
         /* Map in the MyriCOM register/localram set. */
         if (mp->eeprom.cpuvers < CPUVERS_4_0) {
-                /* XXX Makes no sense, if control reg is non-existant this
+                /* XXX Makes no sense, if control reg is non-existent this
                  * XXX driver cannot function at all... maybe pre-4.0 is
                  * XXX only a valid version for PCI cards?  Ask feldy...
                  */
diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c
index 2fd39630b1e..aa2813e06d0 100644
--- a/drivers/net/natsemi.c
+++ b/drivers/net/natsemi.c
@@ -203,7 +203,7 @@ skbuff at an offset of "+2", 16-byte aligning the IP header.
 IIId. Synchronization
 
 Most operations are synchronized on the np->lock irq spinlock, except the
-recieve and transmit paths which are synchronised using a combination of
+receive and transmit paths which are synchronised using a combination of
 hardware descriptor ownership, disabling interrupts and NAPI poll scheduling.
 
 IVb. References
@@ -726,7 +726,7 @@ static void move_int_phy(struct net_device *dev, int addr)
          * There are two addresses we must avoid:
          * - the address on the external phy that is used for transmission.
          * - the address that we want to access. User space can access phys
-         *   on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independant from the
+         *   on the mii bus with SIOCGMIIREG/SIOCSMIIREG, independent from the
          *   phy that is used for transmission.
          */
 
@@ -1982,7 +1982,7 @@ static void init_ring(struct net_device *dev)
 
         np->rx_head_desc = &np->rx_ring[0];
 
-        /* Please be carefull before changing this loop - at least gcc-2.95.1
+        /* Please be careful before changing this loop - at least gcc-2.95.1
          * miscompiles it otherwise.
          */
         /* Initialize all Rx descriptors. */
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index d8bd73d7e29..dc1967c1f31 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -780,7 +780,7 @@ enum {
 
 /*
  * capabilities register, can be used to selectively enable/disable features
- * for backward compability
+ * for backward compatibility
  */
 #define CRB_NIC_CAPABILITIES_HOST       NETXEN_NIC_REG(0x1a8)
 #define CRB_NIC_MSI_MODE_HOST           NETXEN_NIC_REG(0x270)
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c
index a41b2cf4d91..6667e0667a8 100644
--- a/drivers/net/ns83820.c
+++ b/drivers/net/ns83820.c
@@ -512,7 +512,7 @@ static void ns83820_vlan_rx_register(struct net_device *ndev, struct vlan_group
 /* Packet Receiver
  *
  * The hardware supports linked lists of receive descriptors for
- * which ownership is transfered back and forth by means of an
+ * which ownership is transferred back and forth by means of an
  * ownership bit.  While the hardware does support the use of a
  * ring for receive descriptors, we only make use of a chain in
  * an attempt to reduce bus traffic under heavy load scenarios.
@@ -1147,7 +1147,7 @@ again:
 #ifdef NS83820_VLAN_ACCEL_SUPPORT
         if(vlan_tx_tag_present(skb)) {
                 /* fetch the vlan tag info out of the
-                 * ancilliary data if the vlan code
+                 * ancillary data if the vlan code
                  * is using hw vlan acceleration
                  */
                 short tag = vlan_tx_tag_get(skb);
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h
index e1e33c80fb2..bf126e76fab 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/pch_gbe/pch_gbe.h
@@ -351,7 +351,7 @@ struct pch_gbe_functions {
 };
 
 /**
- * struct pch_gbe_mac_info - MAC infomation
+ * struct pch_gbe_mac_info - MAC information
  * @addr[6]:            Store the MAC address
  * @fc:                 Mode of flow control
  * @fc_autoneg:         Auto negotiation enable for flow control setting
@@ -375,7 +375,7 @@ struct pch_gbe_mac_info {
 };
 
 /**
- * struct pch_gbe_phy_info - PHY infomation
+ * struct pch_gbe_phy_info - PHY information
  * @addr:               PHY address
  * @id:                 PHY's identifier
  * @revision:           PHY's revision
@@ -393,7 +393,7 @@ struct pch_gbe_phy_info {
 /*!
  * @ingroup Gigabit Ether driver Layer
  * @struct  pch_gbe_bus_info
- * @brief   Bus infomation
+ * @brief   Bus information
  */
 struct pch_gbe_bus_info {
         u8 type;
@@ -404,7 +404,7 @@ struct pch_gbe_bus_info {
 /*!
  * @ingroup Gigabit Ether driver Layer
  * @struct  pch_gbe_hw
- * @brief   Hardware infomation
+ * @brief   Hardware information
  */
 struct pch_gbe_hw {
         void *back;
@@ -462,7 +462,7 @@ struct pch_gbe_tx_desc {
 
 
 /**
- * struct pch_gbe_buffer - Buffer infomation
+ * struct pch_gbe_buffer - Buffer information
  * @skb:        pointer to a socket buffer
  * @dma:        DMA address
  * @time_stamp: time stamp
@@ -477,7 +477,7 @@ struct pch_gbe_buffer {
 };
 
 /**
- * struct pch_gbe_tx_ring - tx ring infomation
+ * struct pch_gbe_tx_ring - tx ring information
  * @tx_lock:    spinlock structs
  * @desc:       pointer to the descriptor ring memory
  * @dma:        physical address of the descriptor ring
@@ -499,7 +499,7 @@ struct pch_gbe_tx_ring {
 };
 
 /**
- * struct pch_gbe_rx_ring - rx ring infomation
+ * struct pch_gbe_rx_ring - rx ring information
  * @desc:       pointer to the descriptor ring memory
  * @dma:        physical address of the descriptor ring
  * @size:       length of descriptor ring in bytes
diff --git a/drivers/net/pch_gbe/pch_gbe_ethtool.c b/drivers/net/pch_gbe/pch_gbe_ethtool.c
index c8c873b31a8..d2174a40d70 100644
--- a/drivers/net/pch_gbe/pch_gbe_ethtool.c
+++ b/drivers/net/pch_gbe/pch_gbe_ethtool.c
@@ -21,7 +21,7 @@
 #include "pch_gbe_api.h"
 
 /**
- * pch_gbe_stats - Stats item infomation
+ * pch_gbe_stats - Stats item information
  */
 struct pch_gbe_stats {
         char string[ETH_GSTRING_LEN];
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index 50986840c99..2ef2f9cdefa 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -1011,7 +1011,7 @@ static void pch_gbe_tx_queue(struct pch_gbe_adapter *adapter,
         tmp_skb->len = skb->len;
         memcpy(&tmp_skb->data[ETH_HLEN + 2], &skb->data[ETH_HLEN],
                (skb->len - ETH_HLEN));
-        /*-- Set Buffer infomation --*/
+        /*-- Set Buffer information --*/
         buffer_info->length = tmp_skb->len;
         buffer_info->dma = dma_map_single(&adapter->pdev->dev, tmp_skb->data,
                                           buffer_info->length,
@@ -1540,7 +1540,7 @@ int pch_gbe_setup_tx_resources(struct pch_gbe_adapter *adapter,
         size = (int)sizeof(struct pch_gbe_buffer) * tx_ring->count;
         tx_ring->buffer_info = vzalloc(size);
         if (!tx_ring->buffer_info) {
-                pr_err("Unable to allocate memory for the buffer infomation\n");
+                pr_err("Unable to allocate memory for the buffer information\n");
                 return -ENOMEM;
         }
 
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 1766dc4f07e..c0f23376a46 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -214,7 +214,7 @@ static struct {
         { "SMC1211TX EZCard 10/100 (RealTek RTL8139)" },
 /*      { MPX5030, "Accton MPX5030 (RealTek RTL8139)" },*/
         { "Delta Electronics 8139 10/100BaseTX" },
-        { "Addtron Technolgy 8139 10/100BaseTX" },
+        { "Addtron Technology 8139 10/100BaseTX" },
 };
 
 
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 321b12f8264..81ac330f931 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -950,7 +950,7 @@ static struct net_device_stats *el3_get_stats(struct net_device *dev)
 }
 
 /*  Update statistics.
-        Suprisingly this need not be run single-threaded, but it effectively is.
+        Surprisingly this need not be run single-threaded, but it effectively is.
         The counters clear when read, so the adds must merely be atomic.
  */
 static void update_stats(struct net_device *dev)
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index d3cb7720586..3077d72e822 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -780,7 +780,7 @@ module_exit(exit_axnet_cs);
   Alexey Kuznetsov      : use the 8390's six bit hash multicast filter.
   Paul Gortmaker        : tweak ANK's above multicast changes a bit.
   Paul Gortmaker        : update packet statistics for v2.1.x
-  Alan Cox              : support arbitary stupid port mappings on the
+  Alan Cox              : support arbitrary stupid port mappings on the
                           68K Macintosh. Support >16bit I/O spaces
   Paul Gortmaker        : add kmod support for auto-loading of the 8390
                           module by all drivers that require it.
@@ -842,7 +842,7 @@ static void do_set_multicast_list(struct net_device *dev);
 /*
  *      SMP and the 8390 setup.
  *
- *      The 8390 isnt exactly designed to be multithreaded on RX/TX. There is
+ *      The 8390 isn't exactly designed to be multithreaded on RX/TX. There is
  *      a page register that controls bank and packet buffer access. We guard
  *      this with ei_local->page_lock. Nobody should assume or set the page other
  *      than zero when the lock is not held. Lock holders must restore page 0
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 8a9ff531892..10859175644 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -1264,7 +1264,7 @@ static netdev_tx_t smc_start_xmit(struct sk_buff *skb,
 
 /*======================================================================
 
-    Handle a Tx anomolous event.  Entered while in Window 2.
+    Handle a Tx anomalous event.  Entered while in Window 2.
 
 ======================================================================*/
 
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index aee3bb0358b..768037602df 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -1651,7 +1651,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev)
         /*
          *  On selected chips turn on the BCR18:NOUFLO bit. This stops transmit
          *  starting until the packet is loaded. Strike one for reliability, lose
-         *  one for latency - although on PCI this isnt a big loss. Older chips
+         *  one for latency - although on PCI this isn't a big loss. Older chips
          *  have FIFO's smaller than a packet, so you can't do this.
          *  Turn on BCR18:BurstRdEn and BCR18:BurstWrEn.
          */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 993c52c82ae..ff6129319b8 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -534,7 +534,7 @@ EXPORT_SYMBOL(phy_detach);
 /* Generic PHY support and helper functions */
 
 /**
- * genphy_config_advert - sanitize and advertise auto-negotation parameters
+ * genphy_config_advert - sanitize and advertise auto-negotiation parameters
  * @phydev: target phy_device struct
  *
  * Description: Writes MII_ADVERTISE with the appropriate values,
@@ -683,7 +683,7 @@ int genphy_config_aneg(struct phy_device *phydev)
                 return result;
 
         if (result == 0) {
-                /* Advertisment hasn't changed, but maybe aneg was never on to
+                /* Advertisement hasn't changed, but maybe aneg was never on to
                  * begin with?  Or maybe phy was isolated? */
                 int ctl = phy_read(phydev, MII_BMCR);
 
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 9f6d670748d..4609bc0e2f5 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1448,7 +1448,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb)
 
                 /*
                  *check if we are on the last channel or
-                 *we exceded the lenght of the data to
+                 *we exceded the length of the data to
                  *fragment
                  */
                 if ((nfree <= 0) || (flen > len))
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index 4e6b72f57de..2573f525f11 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -178,7 +178,7 @@ ppp_print_buffer (const char *name, const __u8 *buf, int count)
  * way to fix this is to use a rwlock in the tty struct, but for now
  * we use a single global rwlock for all ttys in ppp line discipline.
  *
- * FIXME: Fixed in tty_io nowdays.
+ * FIXME: Fixed in tty_io nowadays.
  */
 static DEFINE_RWLOCK(disc_data_lock);
 
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 78c0e3c9b2b..693aaef4e3c 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -115,7 +115,7 @@ struct pppoe_net {
  * 2) Session stage (MAC and SID are known)
  *
  * Ethernet frames have a special tag for this but
- * we use simplier approach based on session id
+ * we use simpler approach based on session id
  */
 static inline bool stage_session(__be16 sid)
 {
diff --git a/drivers/net/ps3_gelic_net.c b/drivers/net/ps3_gelic_net.c
index 5ecfa4b1e75..ffdf7349ef7 100644
--- a/drivers/net/ps3_gelic_net.c
+++ b/drivers/net/ps3_gelic_net.c
@@ -632,7 +632,7 @@ static inline void gelic_card_enable_rxdmac(struct gelic_card *card)
  * @card: card structure
  *
  * gelic_card_disable_rxdmac terminates processing on the DMA controller by
- * turing off DMA and issueing a force end
+ * turing off DMA and issuing a force end
  */
 static inline void gelic_card_disable_rxdmac(struct gelic_card *card)
 {
@@ -650,7 +650,7 @@ static inline void gelic_card_disable_rxdmac(struct gelic_card *card)
  * @card: card structure
  *
  * gelic_card_disable_txdmac terminates processing on the DMA controller by
- * turing off DMA and issueing a force end
+ * turing off DMA and issuing a force end
  */
 static inline void gelic_card_disable_txdmac(struct gelic_card *card)
 {
diff --git a/drivers/net/ps3_gelic_net.h b/drivers/net/ps3_gelic_net.h
index 32521ae5e82..fadadf9097a 100644
--- a/drivers/net/ps3_gelic_net.h
+++ b/drivers/net/ps3_gelic_net.h
@@ -117,7 +117,7 @@ enum gelic_descr_rx_error {
         GELIC_DESCR_RXDATAERR   = 0x00020000, /* IP packet format error */
         GELIC_DESCR_RXCALERR    = 0x00010000, /* cariier extension length
                                               * error */
-        GELIC_DESCR_RXCREXERR   = 0x00008000, /* carrier extention error */
+        GELIC_DESCR_RXCREXERR   = 0x00008000, /* carrier extension error */
         GELIC_DESCR_RXMLTCST    = 0x00004000, /* multicast address frame */
         /* bit 13..0 reserved */
 };
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 4a624a29393..b5ae29d20f2 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -814,7 +814,7 @@ static int gelic_wl_set_auth(struct net_device *netdev,
                          * you will not decide suitable cipher from
                          * its beacon.
                          * You should have knowledge about the AP's
-                         * cipher infomation in other method prior to
+                         * cipher information in other method prior to
                          * the association.
                          */
                         if (!precise_ie())
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 1b63c8aef12..89f7540d90f 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -462,7 +462,7 @@ static u32 hash_function(unsigned char *mac_addr_orig)
  * pep - ETHERNET .
  * mac_addr - MAC address.
  * skip - if 1, skip this address.Used in case of deleting an entry which is a
- *        part of chain in the hash table.We cant just delete the entry since
+ *        part of chain in the hash table.We can't just delete the entry since
  *        that will break the chain.We need to defragment the tables time to
  *        time.
  * rd   - 0 Discard packet upon match.
diff --git a/drivers/net/qla3xxx.h b/drivers/net/qla3xxx.h
index 3362a661248..73e234366a8 100644
--- a/drivers/net/qla3xxx.h
+++ b/drivers/net/qla3xxx.h
@@ -770,7 +770,7 @@ enum {
         FM93C56A_WDS = 0x0,
         FM93C56A_ERASE = 0x3,
         FM93C56A_ERASE_ALL = 0x0,
-/* Command Extentions */
+/* Command Extensions */
         FM93C56A_WEN_EXT = 0x3,
         FM93C56A_WRITE_ALL_EXT = 0x1,
         FM93C56A_WDS_EXT = 0x0,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 49bfa581306..5bb31194543 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -660,7 +660,7 @@ static void ql_disable_interrupts(struct ql_adapter *qdev)
 /* If we're running with multiple MSI-X vectors then we enable on the fly.
  * Otherwise, we may have multiple outstanding workers and don't want to
  * enable until the last one finishes. In this case, the irq_cnt gets
- * incremented everytime we queue a worker and decremented everytime
+ * incremented every time we queue a worker and decremented every time
  * a worker finishes.  Once it hits zero we enable the interrupt.
  */
 u32 ql_enable_completion_interrupt(struct ql_adapter *qdev, u32 intr)
@@ -3299,7 +3299,7 @@ msi:
  * will service it.  An example would be if there are
  * 2 vectors (so 2 RSS rings) and 8 TX completion rings.
  * This would mean that vector 0 would service RSS ring 0
- * and TX competion rings 0,1,2 and 3.  Vector 1 would
+ * and TX completion rings 0,1,2 and 3.  Vector 1 would
  * service RSS ring 1 and TX completion rings 4,5,6 and 7.
  */
 static void ql_set_tx_vect(struct ql_adapter *qdev)
@@ -4152,7 +4152,7 @@ static int ql_change_rx_buffers(struct ql_adapter *qdev)
         int i, status;
         u32 lbq_buf_len;
 
-        /* Wait for an oustanding reset to complete. */
+        /* Wait for an outstanding reset to complete. */
         if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) {
                 int i = 3;
                 while (i-- && !test_bit(QL_ADAPTER_UP, &qdev->flags)) {
@@ -4281,7 +4281,7 @@ static void qlge_set_multicast_list(struct net_device *ndev)
                         if (ql_set_routing_reg
                             (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 1)) {
                                 netif_err(qdev, hw, qdev->ndev,
-                                          "Failed to set promiscous mode.\n");
+                                          "Failed to set promiscuous mode.\n");
                         } else {
                                 set_bit(QL_PROMISCUOUS, &qdev->flags);
                         }
@@ -4291,7 +4291,7 @@ static void qlge_set_multicast_list(struct net_device *ndev)
                         if (ql_set_routing_reg
                             (qdev, RT_IDX_PROMISCUOUS_SLOT, RT_IDX_VALID, 0)) {
                                 netif_err(qdev, hw, qdev->ndev,
-                                          "Failed to clear promiscous mode.\n");
+                                          "Failed to clear promiscuous mode.\n");
                         } else {
                                 clear_bit(QL_PROMISCUOUS, &qdev->flags);
                         }
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index e3ebd90ae65..200a363c3bf 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -535,7 +535,7 @@ static int r6040_rx(struct net_device *dev, int limit)
                         /* RX dribble */
                         if (err & DSC_RX_ERR_DRI)
                                 dev->stats.rx_frame_errors++;
-                        /* Buffer lenght exceeded */
+                        /* Buffer length exceeded */
                         if (err & DSC_RX_ERR_BUF)
                                 dev->stats.rx_length_errors++;
                         /* Packet too long */
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 356e74d20b8..337bdcd5abc 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -2353,7 +2353,7 @@ static int start_nic(struct s2io_nic *nic)
 
         if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
                 /*
-                 * Dont see link state interrupts initally on some switches,
+                 * Dont see link state interrupts initially on some switches,
                  * so directly scheduling the link state task here.
                  */
                 schedule_work(&nic->set_link_task);
@@ -3563,7 +3563,7 @@ static void s2io_reset(struct s2io_nic *sp)
         }
 
         /*
-         * Clear spurious ECC interrupts that would have occured on
+         * Clear spurious ECC interrupts that would have occurred on
          * XFRAME II cards after reset.
          */
         if (sp->device_type == XFRAME_II_DEVICE) {
@@ -4065,7 +4065,7 @@ static int s2io_close(struct net_device *dev)
  *  Description :
  *  This function is the Tx entry point of the driver. S2IO NIC supports
  *  certain protocol assist features on Tx side, namely  CSO, S/G, LSO.
- *  NOTE: when device cant queue the pkt,just the trans_start variable will
+ *  NOTE: when device can't queue the pkt,just the trans_start variable will
  *  not be upadted.
  *  Return value:
  *  0 on success & 1 on failure.
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 7d160306b65..2d144979f6f 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -376,7 +376,7 @@ static const u16 fifo_selector[MAX_TX_FIFOS] = {0, 1, 3, 3, 7, 7, 7, 7};
 /* Maintains Per FIFO related information. */
 struct tx_fifo_config {
 #define MAX_AVAILABLE_TXDS      8192
-        u32 fifo_len;           /* specifies len of FIFO upto 8192, ie no of TxDLs */
+        u32 fifo_len;           /* specifies len of FIFO up to 8192, ie no of TxDLs */
 /* Priority definition */
 #define TX_FIFO_PRI_0               0   /*Highest */
 #define TX_FIFO_PRI_1               1
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 734fcfb52e8..d96b23769bd 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -692,7 +692,7 @@ static int falcon_gmii_wait(struct efx_nic *efx)
         efx_oword_t md_stat;
         int count;
 
-        /* wait upto 50ms - taken max from datasheet */
+        /* wait up to 50ms - taken max from datasheet */
         for (count = 0; count < 5000; count++) {
                 efx_reado(efx, &md_stat, FR_AB_MD_STAT);
                 if (EFX_OWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) {
@@ -1221,7 +1221,7 @@ static int falcon_reset_sram(struct efx_nic *efx)
 
                         return 0;
                 }
-        } while (++count < 20); /* wait upto 0.4 sec */
+        } while (++count < 20); /* wait up to 0.4 sec */
 
         netif_err(efx, hw, efx->net_dev, "timed out waiting for SRAM reset\n");
         return -ETIMEDOUT;
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 5e118f0d247..d98479030ef 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -453,7 +453,7 @@ static void efx_mcdi_ev_death(struct efx_nic *efx, int rc)
          *
          * There's a race here with efx_mcdi_rpc(), because we might receive
          * a REBOOT event *before* the request has been copied out. In polled
-         * mode (during startup) this is irrelevent, because efx_mcdi_complete()
+         * mode (during startup) this is irrelevant, because efx_mcdi_complete()
          * is ignored. In event mode, this condition is just an edge-case of
          * receiving a REBOOT event after posting the MCDI request. Did the mc
          * reboot before or after the copyout? The best we can do always is
diff --git a/drivers/net/sfc/mcdi_pcol.h b/drivers/net/sfc/mcdi_pcol.h
index b86a15f221a..41fe06fa060 100644
--- a/drivers/net/sfc/mcdi_pcol.h
+++ b/drivers/net/sfc/mcdi_pcol.h
@@ -103,7 +103,7 @@
  *
  * If Code==CMDDONE, then the fields are further interpreted as:
  *
- *   - LEVEL==INFO    Command succeded
+ *   - LEVEL==INFO    Command succeeded
  *   - LEVEL==ERR     Command failed
  *
  *    0     8         16      24     32
@@ -572,7 +572,7 @@
   (4*(_numwords))
 
 /* MC_CMD_SET_RAND_SEED:
- * Set the 16byte seed for the MC psuedo-random generator
+ * Set the 16byte seed for the MC pseudo-random generator
  */
 #define MC_CMD_SET_RAND_SEED 0x1a
 #define MC_CMD_SET_RAND_SEED_IN_LEN 16
@@ -1162,7 +1162,7 @@
 #define MC_CMD_MAC_STATS_CMD_CLEAR_WIDTH 1
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_LBN 2
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CHANGE_WIDTH 1
-/* Remaining PERIOD* fields only relevent when PERIODIC_CHANGE is set */
+/* Remaining PERIOD* fields only relevant when PERIODIC_CHANGE is set */
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_LBN 3
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_ENABLE_WIDTH 1
 #define MC_CMD_MAC_STATS_CMD_PERIODIC_CLEAR_LBN 4
diff --git a/drivers/net/sfc/mcdi_phy.c b/drivers/net/sfc/mcdi_phy.c
index ec3f740f546..7e3c65b0c99 100644
--- a/drivers/net/sfc/mcdi_phy.c
+++ b/drivers/net/sfc/mcdi_phy.c
@@ -449,7 +449,7 @@ void efx_mcdi_phy_check_fcntl(struct efx_nic *efx, u32 lpa)
         struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
         u32 rmtadv;
 
-        /* The link partner capabilities are only relevent if the
+        /* The link partner capabilities are only relevant if the
          * link supports flow control autonegotiation */
         if (~phy_cfg->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
                 return;
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 215d5c51bfa..9ffa9a6b55a 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -670,7 +670,7 @@ struct efx_filter_state;
  * @irq_zero_count: Number of legacy IRQs seen with queue flags == 0
  * @fatal_irq_level: IRQ level (bit number) used for serious errors
  * @mtd_list: List of MTDs attached to the NIC
- * @nic_data: Hardware dependant state
+ * @nic_data: Hardware dependent state
  * @mac_lock: MAC access lock. Protects @port_enabled, @phy_mode,
  *      @port_inhibited, efx_monitor() and efx_reconfigure_port()
  * @port_enabled: Port enabled indicator.
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index 3a0cc63428e..dd03bf61998 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -33,7 +33,7 @@ static char *sgiseeqstr = "SGI Seeq8003";
  * with that in mind, I've decided to make this driver look completely like a
  * stupid Lance from a driver architecture perspective.  Only difference is that
  * here our "ring buffer" looks and acts like a real Lance one does but is
- * layed out like how the HPC DMA and the Seeq want it to.  You'd be surprised
+ * laid out like how the HPC DMA and the Seeq want it to.  You'd be surprised
  * how a stupid idea like this can pay off in performance, not to mention
  * making this driver 2,000 times easier to write. ;-)
  */
@@ -77,7 +77,7 @@ struct sgiseeq_tx_desc {
 };
 
 /*
- * Warning: This structure is layed out in a certain way because HPC dma
+ * Warning: This structure is laid out in a certain way because HPC dma
  *          descriptors must be 8-byte aligned.  So don't touch this without
  *          some care.
  */
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index e9e7a530552..8a72a979ee7 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -1875,7 +1875,7 @@ static int sh_eth_drv_probe(struct platform_device *pdev)
         if (ret)
                 goto out_unregister;
 
-        /* print device infomation */
+        /* print device information */
         pr_info("Base address at 0x%x, %pM, IRQ %d.\n",
                (u32)ndev->base_addr, ndev->dev_addr, ndev->irq);
 
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 3406ed87091..b436e007eea 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -93,7 +93,7 @@ enum sis190_registers {
         IntrStatus              = 0x20,
         IntrMask                = 0x24,
         IntrControl             = 0x28,
-        IntrTimer               = 0x2c, // unused (Interupt Timer)
+        IntrTimer               = 0x2c, // unused (Interrupt Timer)
         PMControl               = 0x30, // unused (Power Mgmt Control/Status)
         rsv2                    = 0x34, // reserved
         ROMControl              = 0x38,
@@ -234,7 +234,7 @@ enum _DescStatusBit {
         RxSizeMask      = 0x0000ffff
         /*
          * The asic could apparently do vlan, TSO, jumbo (sis191 only) and
-         * provide two (unused with Linux) Tx queues. No publically
+         * provide two (unused with Linux) Tx queues. No publicly
          * available documentation alas.
          */
 };
diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c
index 84d4167eee9..cb317cd069f 100644
--- a/drivers/net/sis900.c
+++ b/drivers/net/sis900.c
@@ -1180,7 +1180,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
  *
  *      630E equalizer workaround rule(Cyrus Huang 08/15)
  *      PHY register 14h(Test)
- *      Bit 14: 0 -- Automatically dectect (default)
+ *      Bit 14: 0 -- Automatically detect (default)
  *              1 -- Manually set Equalizer filter
  *      Bit 13: 0 -- (Default)
  *              1 -- Speed up convergence of equalizer setting
@@ -1192,7 +1192,7 @@ sis900_init_rx_ring(struct net_device *net_dev)
  *      Then set equalizer value, and set Bit 14 to 1, Bit 9 to 0
  *      Link Off:Set Bit 13 to 1, Bit 14 to 0
  *      Calculate Equalizer value:
- *      When Link is ON and Bit 14 is 0, SIS900PHY will auto-dectect proper equalizer value.
+ *      When Link is ON and Bit 14 is 0, SIS900PHY will auto-detect proper equalizer value.
  *      When the equalizer is stable, this value is not a fixed value. It will be within
  *      a small range(eg. 7~9). Then we get a minimum and a maximum value(eg. min=7, max=9)
  *      0 <= max <= 4  --> set equalizer to max
@@ -1723,7 +1723,7 @@ static int sis900_rx(struct net_device *net_dev)
                 rx_size = data_size - CRC_SIZE;
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
-                /* ``TOOLONG'' flag means jumbo packet recived. */
+                /* ``TOOLONG'' flag means jumbo packet received. */
                 if ((rx_status & TOOLONG) && data_size <= MAX_FRAME_SIZE)
                         rx_status &= (~ ((unsigned int)TOOLONG));
 #endif
diff --git a/drivers/net/skfp/ess.c b/drivers/net/skfp/ess.c
index 8639a0884f5..2fc5987b41d 100644
--- a/drivers/net/skfp/ess.c
+++ b/drivers/net/skfp/ess.c
@@ -241,7 +241,7 @@ int ess_raf_received_pack(struct s_smc *smc, SMbuf *mb, struct smt_header *sm,
                         != SMT_RDF_SUCCESS) ||
                         (sm->smt_tid != smc->ess.alloc_trans_id)) {
 
-                        DB_ESS("ESS: Allocation Responce not accepted\n",0,0) ;
+                        DB_ESS("ESS: Allocation Response not accepted\n",0,0) ;
                         return fs;
                 }
 
@@ -393,7 +393,7 @@ static int process_bw_alloc(struct s_smc *smc, long int payload, long int overhe
          *                    |  T-NEG  |
          *                     -       -
          *
-         * T-NEG is discribed by the equation:
+         * T-NEG is described by the equation:
          *
          *                   (-) fddiMACT-NEG
          *      T-NEG =     -------------------
@@ -479,7 +479,7 @@ static void ess_send_response(struct s_smc *smc, struct smt_header *sm,
         void                    *p ;
 
         /*
-         * get and initialize the responce frame
+         * get and initialize the response frame
          */
         if (sba_cmd == CHANGE_ALLOCATION) {
                 if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REPLY,
@@ -578,7 +578,7 @@ static void ess_send_alc_req(struct s_smc *smc)
         }
         
         /*
-         * get and initialize the responce frame
+         * get and initialize the response frame
          */
         if (!(mb=smt_build_frame(smc,SMT_RAF,SMT_REQUEST,
                         sizeof(struct smt_sba_alc_req))))
diff --git a/drivers/net/skfp/fplustm.c b/drivers/net/skfp/fplustm.c
index ca4e7bb6a5a..a20ed1a9809 100644
--- a/drivers/net/skfp/fplustm.c
+++ b/drivers/net/skfp/fplustm.c
@@ -340,7 +340,7 @@ static void mac_counter_init(struct s_smc *smc)
         outpw(FM_A(FM_LCNTR),0) ;
         outpw(FM_A(FM_ECNTR),0) ;
         /*
-         * clear internal error counter stucture
+         * clear internal error counter structure
          */
         ec = (u_long *)&smc->hw.fp.err_stats ;
         for (i = (sizeof(struct err_st)/sizeof(long)) ; i ; i--)
@@ -1262,8 +1262,8 @@ Function	DOWNCALL/INTERN	(SMT, fplustm.c)
 
 Para    mode =  1       RX_ENABLE_ALLMULTI      enable all multicasts
                 2       RX_DISABLE_ALLMULTI     disable "enable all multicasts"
-                3       RX_ENABLE_PROMISC       enable promiscous
-                4       RX_DISABLE_PROMISC      disable promiscous
+                3       RX_ENABLE_PROMISC       enable promiscuous
+                4       RX_DISABLE_PROMISC      disable promiscuous
                 5       RX_ENABLE_NSA           enable reception of NSA frames
                 6       RX_DISABLE_NSA          disable reception of NSA frames
 
diff --git a/drivers/net/skfp/h/cmtdef.h b/drivers/net/skfp/h/cmtdef.h
index f2f771d8be7..5a6c6122ccb 100644
--- a/drivers/net/skfp/h/cmtdef.h
+++ b/drivers/net/skfp/h/cmtdef.h
@@ -19,7 +19,7 @@
 
 /*
  * implementation specific constants
- * MODIIFY THE FOLLWOING THREE DEFINES
+ * MODIIFY THE FOLLOWING THREE DEFINES
  */
 #define AMDPLC                  /* if Amd PLC chip used */
 #ifdef  CONC
@@ -456,7 +456,7 @@ struct s_plc {
         u_long soft_err ;               /* error counter */
         u_long parity_err ;             /* error counter */
         u_long ebuf_err ;               /* error counter */
-        u_long ebuf_cont ;              /* continous error counter */
+        u_long ebuf_cont ;              /* continuous error counter */
         u_long phyinv ;                 /* error counter */
         u_long vsym_ctr ;               /* error counter */
         u_long mini_ctr ;               /* error counter */
diff --git a/drivers/net/skfp/h/fplustm.h b/drivers/net/skfp/h/fplustm.h
index 6d738e1e239..d43191ed938 100644
--- a/drivers/net/skfp/h/fplustm.h
+++ b/drivers/net/skfp/h/fplustm.h
@@ -237,8 +237,8 @@ struct s_smt_fp {
  */
 #define RX_ENABLE_ALLMULTI      1       /* enable all multicasts */
 #define RX_DISABLE_ALLMULTI     2       /* disable "enable all multicasts" */
-#define RX_ENABLE_PROMISC       3       /* enable promiscous */
-#define RX_DISABLE_PROMISC      4       /* disable promiscous */
+#define RX_ENABLE_PROMISC       3       /* enable promiscuous */
+#define RX_DISABLE_PROMISC      4       /* disable promiscuous */
 #define RX_ENABLE_NSA           5       /* enable reception of NSA frames */
 #define RX_DISABLE_NSA          6       /* disable reception of NSA frames */
 
diff --git a/drivers/net/skfp/h/smc.h b/drivers/net/skfp/h/smc.h
index 026a83b9f74..c774a95902f 100644
--- a/drivers/net/skfp/h/smc.h
+++ b/drivers/net/skfp/h/smc.h
@@ -388,7 +388,7 @@ struct smt_config {
         u_long  rmt_t_poll ;            /* RMT : claim/beacon poller */
         u_long  rmt_dup_mac_behavior ;  /* Flag for the beavior of SMT if
                                          * a Duplicate MAC Address was detected.
-                                         * FALSE: SMT will leave finaly the ring
+                                         * FALSE: SMT will leave finally the ring
                                          * TRUE:  SMT will reinstert into the ring
                                          */
         u_long  mac_d_max ;             /* MAC : D_Max timer value */
diff --git a/drivers/net/skfp/h/smt.h b/drivers/net/skfp/h/smt.h
index 2976757a36f..2030f9cbb24 100644
--- a/drivers/net/skfp/h/smt.h
+++ b/drivers/net/skfp/h/smt.h
@@ -793,7 +793,7 @@ struct smt_rdf {
 } ;
 
 /*
- * SBA Request Allocation Responce Frame
+ * SBA Request Allocation Response Frame
  */
 struct smt_sba_alc_res {
         struct smt_header       smt ;           /* generic header */
diff --git a/drivers/net/skfp/h/supern_2.h b/drivers/net/skfp/h/supern_2.h
index 5ba0b830675..0b73690280f 100644
--- a/drivers/net/skfp/h/supern_2.h
+++ b/drivers/net/skfp/h/supern_2.h
@@ -14,7 +14,7 @@
 
 /*
         defines for AMD Supernet II chip set
-        the chips are refered to as
+        the chips are referred to as
                 FPLUS   Formac Plus
                 PLC     Physical Layer
 
@@ -386,7 +386,7 @@ struct tx_queue {
 #define FM_MDISRCV      (4<<8)          /* disable receive function */
 #define FM_MRES0        (5<<8)          /* reserve */
 #define FM_MLIMPROM     (6<<8)          /* limited-promiscuous mode */
-#define FM_MPROMISCOUS  (7<<8)          /* address detection : promiscous */
+#define FM_MPROMISCOUS  (7<<8)          /* address detection : promiscuous */
 
 #define FM_SELSA        0x0800          /* select-short-address bit */
 
diff --git a/drivers/net/skfp/hwmtm.c b/drivers/net/skfp/hwmtm.c
index af5a755e269..e26398b5a7d 100644
--- a/drivers/net/skfp/hwmtm.c
+++ b/drivers/net/skfp/hwmtm.c
@@ -691,7 +691,7 @@ static u_long repair_rxd_ring(struct s_smc *smc, struct s_smt_rx_queue *queue)
  *              interrupt service routine, handles the interrupt requests
  *              generated by the FDDI adapter.
  *
- * NOTE:        The operating system dependent module must garantee that the
+ * NOTE:        The operating system dependent module must guarantee that the
  *              interrupts of the adapter are disabled when it calls fddi_isr.
  *
  *      About the USE_BREAK_ISR mechanismn:
diff --git a/drivers/net/skfp/pcmplc.c b/drivers/net/skfp/pcmplc.c
index 112d35b1bf0..88d02d0a42c 100644
--- a/drivers/net/skfp/pcmplc.c
+++ b/drivers/net/skfp/pcmplc.c
@@ -1680,7 +1680,7 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd)
                          * Prevent counter from being wrapped after
                          * hanging years in that interrupt.
                          */
-                        plc->ebuf_cont++ ;      /* Ebuf continous error */
+                        plc->ebuf_cont++ ;      /* Ebuf continuous error */
                 }
 
 #ifdef  SUPERNET_3
@@ -1717,8 +1717,8 @@ void plc_irq(struct s_smc *smc, int np, unsigned int cmd)
                 }
 #endif  /* SUPERNET_3 */
         } else {
-                /* Reset the continous error variable */
-                plc->ebuf_cont = 0 ;    /* reset Ebuf continous error */
+                /* Reset the continuous error variable */
+                plc->ebuf_cont = 0 ;    /* reset Ebuf continuous error */
         }
         if (cmd & PL_PHYINV) {          /* physical layer invalid signal */
                 plc->phyinv++ ;
diff --git a/drivers/net/skfp/smt.c b/drivers/net/skfp/smt.c
index 1e1bd0c201c..08d94329c12 100644
--- a/drivers/net/skfp/smt.c
+++ b/drivers/net/skfp/smt.c
@@ -219,7 +219,7 @@ void smt_emulate_token_ct(struct s_smc *smc, int mac_index)
 
         /*
          * Only when ring is up we will have a token count. The
-         * flag is unfortunatly a single instance value. This
+         * flag is unfortunately a single instance value. This
          * doesn't matter now, because we currently have only
          * one MAC instance.
          */
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index 507addcaffa..51c0214ac25 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -1038,7 +1038,7 @@ enum {
 
         PHY_ST_PRE_SUP  = 1<<6, /* Bit  6:      Preamble Suppression */
         PHY_ST_AN_OVER  = 1<<5, /* Bit  5:      Auto-Negotiation Over */
-        PHY_ST_REM_FLT  = 1<<4, /* Bit  4:      Remote Fault Condition Occured */
+        PHY_ST_REM_FLT  = 1<<4, /* Bit  4:      Remote Fault Condition Occurred */
         PHY_ST_AN_CAP   = 1<<3, /* Bit  3:      Auto-Negotiation Capability */
         PHY_ST_LSYNC    = 1<<2, /* Bit  2:      Link Synchronized */
         PHY_ST_JAB_DET  = 1<<1, /* Bit  1:      Jabber Detected */
@@ -1721,8 +1721,8 @@ enum {
         GM_GPSR_LINK_UP         = 1<<12, /* Bit 12:     Link Up Status */
         GM_GPSR_PAUSE           = 1<<11, /* Bit 11:     Pause State */
         GM_GPSR_TX_ACTIVE       = 1<<10, /* Bit 10:     Tx in Progress */
-        GM_GPSR_EXC_COL         = 1<<9, /* Bit  9:      Excessive Collisions Occured */
-        GM_GPSR_LAT_COL         = 1<<8, /* Bit  8:      Late Collisions Occured */
+        GM_GPSR_EXC_COL         = 1<<9, /* Bit  9:      Excessive Collisions Occurred */
+        GM_GPSR_LAT_COL         = 1<<8, /* Bit  8:      Late Collisions Occurred */
 
         GM_GPSR_PHY_ST_CH       = 1<<5, /* Bit  5:      PHY Status Change */
         GM_GPSR_GIG_SPEED       = 1<<4, /* Bit  4:      Gigabit Speed (1 = 1000 Mbps) */
@@ -2227,7 +2227,7 @@ enum {
         XM_ST_BC        = 1<<7,         /* Bit  7:      Broadcast packet */
         XM_ST_MC        = 1<<6,         /* Bit  6:      Multicast packet */
         XM_ST_UC        = 1<<5,         /* Bit  5:      Unicast packet */
-        XM_ST_TX_UR     = 1<<4,         /* Bit  4:      FIFO Underrun occured */
+        XM_ST_TX_UR     = 1<<4,         /* Bit  4:      FIFO Underrun occurred */
         XM_ST_CS_ERR    = 1<<3,         /* Bit  3:      Carrier Sense Error */
         XM_ST_LAT_COL   = 1<<2,         /* Bit  2:      Late Collision Error */
         XM_ST_MUL_COL   = 1<<1,         /* Bit  1:      Multiple Collisions */
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 2a91868788f..ff8d262dc27 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -932,7 +932,7 @@ static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
         sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
         sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
 
-        /* On chips without ram buffer, pause is controled by MAC level */
+        /* On chips without ram buffer, pause is controlled by MAC level */
         if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
                 /* Pause threshold is scaled by 8 in bytes */
                 if (hw->chip_id == CHIP_ID_YUKON_FE_P &&
@@ -3255,7 +3255,7 @@ static void sky2_reset(struct sky2_hw *hw)
 
 /* Take device down (offline).
  * Equivalent to doing dev_stop() but this does not
- * inform upper layers of the transistion.
+ * inform upper layers of the transition.
  */
 static void sky2_detach(struct net_device *dev)
 {
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 6861b0e8db9..0c6d10c5f05 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1194,7 +1194,7 @@ enum {
 
         PHY_ST_PRE_SUP  = 1<<6, /* Bit  6:      Preamble Suppression */
         PHY_ST_AN_OVER  = 1<<5, /* Bit  5:      Auto-Negotiation Over */
-        PHY_ST_REM_FLT  = 1<<4, /* Bit  4:      Remote Fault Condition Occured */
+        PHY_ST_REM_FLT  = 1<<4, /* Bit  4:      Remote Fault Condition Occurred */
         PHY_ST_AN_CAP   = 1<<3, /* Bit  3:      Auto-Negotiation Capability */
         PHY_ST_LSYNC    = 1<<2, /* Bit  2:      Link Synchronized */
         PHY_ST_JAB_DET  = 1<<1, /* Bit  1:      Jabber Detected */
@@ -1725,8 +1725,8 @@ enum {
         GM_GPSR_LINK_UP         = 1<<12, /* Bit 12:     Link Up Status */
         GM_GPSR_PAUSE           = 1<<11, /* Bit 11:     Pause State */
         GM_GPSR_TX_ACTIVE       = 1<<10, /* Bit 10:     Tx in Progress */
-        GM_GPSR_EXC_COL         = 1<<9, /* Bit  9:      Excessive Collisions Occured */
-        GM_GPSR_LAT_COL         = 1<<8, /* Bit  8:      Late Collisions Occured */
+        GM_GPSR_EXC_COL         = 1<<9, /* Bit  9:      Excessive Collisions Occurred */
+        GM_GPSR_LAT_COL         = 1<<8, /* Bit  8:      Late Collisions Occurred */
 
         GM_GPSR_PHY_ST_CH       = 1<<5, /* Bit  5:      PHY Status Change */
         GM_GPSR_GIG_SPEED       = 1<<4, /* Bit  4:      Gigabit Speed (1 = 1000 Mbps) */
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 68d48ab6eac..5f53fbbf67b 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -921,7 +921,7 @@ static const char * chip_ids[ 16 ] =  {
  * Hack Alert: Some setups just can't write 8 or 16 bits reliably when not
  * aligned to a 32 bit boundary.  I tell you that does exist!
  * Fortunately the affected register accesses can be easily worked around
- * since we can write zeroes to the preceeding 16 bits without adverse
+ * since we can write zeroes to the preceding 16 bits without adverse
  * effects and use a 32-bit access.
  *
  * Enforce it on any 32-bit capable setup for now.
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index 1566259c1f2..c498b720b53 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -1669,7 +1669,7 @@ static int smsc911x_eeprom_send_cmd(struct smsc911x_data *pdata, u32 op)
         }
 
         if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
-                SMSC_TRACE(DRV, "Error occured during eeprom operation");
+                SMSC_TRACE(DRV, "Error occurred during eeprom operation");
                 return -EINVAL;
         }
 
diff --git a/drivers/net/smsc9420.c b/drivers/net/smsc9420.c
index b09ee1c319e..4c92ad8be76 100644
--- a/drivers/net/smsc9420.c
+++ b/drivers/net/smsc9420.c
@@ -364,7 +364,7 @@ static int smsc9420_eeprom_send_cmd(struct smsc9420_pdata *pd, u32 op)
         }
 
         if (e2cmd & E2P_CMD_EPC_TIMEOUT_) {
-                smsc_info(HW, "Error occured during eeprom operation");
+                smsc_info(HW, "Error occurred during eeprom operation");
                 return -EINVAL;
         }
 
diff --git a/drivers/net/stmmac/norm_desc.c b/drivers/net/stmmac/norm_desc.c
index cd0cc76f7a1..029c2a2cf52 100644
--- a/drivers/net/stmmac/norm_desc.c
+++ b/drivers/net/stmmac/norm_desc.c
@@ -67,7 +67,7 @@ static int ndesc_get_tx_len(struct dma_desc *p)
 
 /* This function verifies if each incoming frame has some errors
  * and, if required, updates the multicast statistics.
- * In case of success, it returns csum_none becasue the device
+ * In case of success, it returns csum_none because the device
  * is not able to compute the csum in HW. */
 static int ndesc_get_rx_status(void *data, struct stmmac_extra_stats *x,
                                struct dma_desc *p)
diff --git a/drivers/net/sunbmac.h b/drivers/net/sunbmac.h
index 8db88945b88..4943e975a73 100644
--- a/drivers/net/sunbmac.h
+++ b/drivers/net/sunbmac.h
@@ -185,7 +185,7 @@
 #define BIGMAC_RXCFG_ENABLE    0x00000001 /* Enable the receiver                      */
 #define BIGMAC_RXCFG_FIFO      0x0000000e /* Default rx fthresh...                    */
 #define BIGMAC_RXCFG_PSTRIP    0x00000020 /* Pad byte strip enable                    */
-#define BIGMAC_RXCFG_PMISC     0x00000040 /* Enable promiscous mode                   */
+#define BIGMAC_RXCFG_PMISC     0x00000040 /* Enable promiscuous mode                   */
 #define BIGMAC_RXCFG_DERR      0x00000080 /* Disable error checking                   */
 #define BIGMAC_RXCFG_DCRCS     0x00000100 /* Disable CRC stripping                    */
 #define BIGMAC_RXCFG_ME        0x00000200 /* Receive packets addressed to me          */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index c1a344829b5..d3be735c471 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1150,7 +1150,7 @@ static void gem_pcs_reinit_adv(struct gem *gp)
         val &= ~(PCS_CFG_ENABLE | PCS_CFG_TO);
         writel(val, gp->regs + PCS_CFG);
 
-        /* Advertise all capabilities except assymetric
+        /* Advertise all capabilities except asymmetric
          * pause.
          */
         val = readl(gp->regs + PCS_MIIADV);
diff --git a/drivers/net/sunhme.h b/drivers/net/sunhme.h
index 756b5bf3aa8..64f278360d8 100644
--- a/drivers/net/sunhme.h
+++ b/drivers/net/sunhme.h
@@ -223,7 +223,7 @@
 /* BigMac receive config register. */
 #define BIGMAC_RXCFG_ENABLE   0x00000001 /* Enable the receiver             */
 #define BIGMAC_RXCFG_PSTRIP   0x00000020 /* Pad byte strip enable           */
-#define BIGMAC_RXCFG_PMISC    0x00000040 /* Enable promiscous mode          */
+#define BIGMAC_RXCFG_PMISC    0x00000040 /* Enable promiscuous mode          */
 #define BIGMAC_RXCFG_DERR     0x00000080 /* Disable error checking          */
 #define BIGMAC_RXCFG_DCRCS    0x00000100 /* Disable CRC stripping           */
 #define BIGMAC_RXCFG_REJME    0x00000200 /* Reject packets addressed to me  */
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index b6eec8cea20..7ca51cebcdd 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -119,13 +119,13 @@ struct tc35815_regs {
 /*
  * Bit assignments
  */
-/* DMA_Ctl bit asign ------------------------------------------------------- */
+/* DMA_Ctl bit assign ------------------------------------------------------- */
 #define DMA_RxAlign            0x00c00000 /* 1:Reception Alignment           */
 #define DMA_RxAlign_1          0x00400000
 #define DMA_RxAlign_2          0x00800000
 #define DMA_RxAlign_3          0x00c00000
 #define DMA_M66EnStat          0x00080000 /* 1:66MHz Enable State            */
-#define DMA_IntMask            0x00040000 /* 1:Interupt mask                 */
+#define DMA_IntMask            0x00040000 /* 1:Interrupt mask                */
 #define DMA_SWIntReq           0x00020000 /* 1:Software Interrupt request    */
 #define DMA_TxWakeUp           0x00010000 /* 1:Transmit Wake Up              */
 #define DMA_RxBigE             0x00008000 /* 1:Receive Big Endian            */
@@ -134,11 +134,11 @@ struct tc35815_regs {
 #define DMA_PowrMgmnt          0x00001000 /* 1:Power Management              */
 #define DMA_DmBurst_Mask       0x000001fc /* DMA Burst size                  */
 
-/* RxFragSize bit asign ---------------------------------------------------- */
+/* RxFragSize bit assign ---------------------------------------------------- */
 #define RxFrag_EnPack          0x00008000 /* 1:Enable Packing                */
 #define RxFrag_MinFragMask     0x00000ffc /* Minimum Fragment                */
 
-/* MAC_Ctl bit asign ------------------------------------------------------- */
+/* MAC_Ctl bit assign ------------------------------------------------------- */
 #define MAC_Link10             0x00008000 /* 1:Link Status 10Mbits           */
 #define MAC_EnMissRoll         0x00002000 /* 1:Enable Missed Roll            */
 #define MAC_MissRoll           0x00000400 /* 1:Missed Roll                   */
@@ -152,7 +152,7 @@ struct tc35815_regs {
 #define MAC_HaltImm            0x00000002 /* 1:Halt Immediate                */
 #define MAC_HaltReq            0x00000001 /* 1:Halt request                  */
 
-/* PROM_Ctl bit asign ------------------------------------------------------ */
+/* PROM_Ctl bit assign ------------------------------------------------------ */
 #define PROM_Busy              0x00008000 /* 1:Busy (Start Operation)        */
 #define PROM_Read              0x00004000 /*10:Read operation                */
 #define PROM_Write             0x00002000 /*01:Write operation               */
@@ -162,7 +162,7 @@ struct tc35815_regs {
 #define PROM_Addr_Ena          0x00000030 /*11xxxx:PROM Write enable         */
                                           /*00xxxx:           disable        */
 
-/* CAM_Ctl bit asign ------------------------------------------------------- */
+/* CAM_Ctl bit assign ------------------------------------------------------- */
 #define CAM_CompEn             0x00000010 /* 1:CAM Compare Enable            */
 #define CAM_NegCAM             0x00000008 /* 1:Reject packets CAM recognizes,*/
                                           /*                    accept other */
@@ -170,7 +170,7 @@ struct tc35815_regs {
 #define CAM_GroupAcc           0x00000002 /* 1:Multicast assept              */
 #define CAM_StationAcc         0x00000001 /* 1:unicast accept                */
 
-/* CAM_Ena bit asign ------------------------------------------------------- */
+/* CAM_Ena bit assign ------------------------------------------------------- */
 #define CAM_ENTRY_MAX                  21   /* CAM Data entry max count      */
 #define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits)  */
 #define CAM_Ena_Bit(index)      (1 << (index))
@@ -178,7 +178,7 @@ struct tc35815_regs {
 #define CAM_ENTRY_SOURCE        1
 #define CAM_ENTRY_MACCTL        20
 
-/* Tx_Ctl bit asign -------------------------------------------------------- */
+/* Tx_Ctl bit assign -------------------------------------------------------- */
 #define Tx_En                  0x00000001 /* 1:Transmit enable               */
 #define Tx_TxHalt              0x00000002 /* 1:Transmit Halt Request         */
 #define Tx_NoPad               0x00000004 /* 1:Suppress Padding              */
@@ -192,7 +192,7 @@ struct tc35815_regs {
 #define Tx_EnTxPar             0x00002000 /* 1:Enable Transmit Parity        */
 #define Tx_EnComp              0x00004000 /* 1:Enable Completion             */
 
-/* Tx_Stat bit asign ------------------------------------------------------- */
+/* Tx_Stat bit assign ------------------------------------------------------- */
 #define Tx_TxColl_MASK         0x0000000F /* Tx Collision Count              */
 #define Tx_ExColl              0x00000010 /* Excessive Collision             */
 #define Tx_TXDefer             0x00000020 /* Transmit Defered                */
@@ -208,7 +208,7 @@ struct tc35815_regs {
 #define Tx_Halted              0x00008000 /* Tx Halted                       */
 #define Tx_SQErr               0x00010000 /* Signal Quality Error(SQE)       */
 
-/* Rx_Ctl bit asign -------------------------------------------------------- */
+/* Rx_Ctl bit assign -------------------------------------------------------- */
 #define Rx_EnGood              0x00004000 /* 1:Enable Good                   */
 #define Rx_EnRxPar             0x00002000 /* 1:Enable Receive Parity         */
 #define Rx_EnLongErr           0x00000800 /* 1:Enable Long Error             */
@@ -222,7 +222,7 @@ struct tc35815_regs {
 #define Rx_RxHalt              0x00000002 /* 1:Receive Halt Request          */
 #define Rx_RxEn                0x00000001 /* 1:Receive Intrrupt Enable       */
 
-/* Rx_Stat bit asign ------------------------------------------------------- */
+/* Rx_Stat bit assign ------------------------------------------------------- */
 #define Rx_Halted              0x00008000 /* Rx Halted                       */
 #define Rx_Good                0x00004000 /* Rx Good                         */
 #define Rx_RxPar               0x00002000 /* Rx Parity Error                 */
@@ -238,7 +238,7 @@ struct tc35815_regs {
 
 #define Rx_Stat_Mask           0x0000FFF0 /* Rx All Status Mask              */
 
-/* Int_En bit asign -------------------------------------------------------- */
+/* Int_En bit assign -------------------------------------------------------- */
 #define Int_NRAbtEn            0x00000800 /* 1:Non-recoverable Abort Enable  */
 #define Int_TxCtlCmpEn         0x00000400 /* 1:Transmit Ctl Complete Enable  */
 #define Int_DmParErrEn         0x00000200 /* 1:DMA Parity Error Enable       */
@@ -253,7 +253,7 @@ struct tc35815_regs {
 #define Int_FDAExEn            0x00000001 /* 1:Free Descriptor Area          */
                                           /*               Exhausted Enable  */
 
-/* Int_Src bit asign ------------------------------------------------------- */
+/* Int_Src bit assign ------------------------------------------------------- */
 #define Int_NRabt              0x00004000 /* 1:Non Recoverable error         */
 #define Int_DmParErrStat       0x00002000 /* 1:DMA Parity Error & Clear      */
 #define Int_BLEx               0x00001000 /* 1:Buffer List Empty & Clear     */
@@ -270,8 +270,8 @@ struct tc35815_regs {
 #define Int_IntMacRx           0x00000002 /* 1:Rx controller & Clear         */
 #define Int_IntMacTx           0x00000001 /* 1:Tx controller & Clear         */
 
-/* MD_CA bit asign --------------------------------------------------------- */
-#define MD_CA_PreSup           0x00001000 /* 1:Preamble Supress              */
+/* MD_CA bit assign --------------------------------------------------------- */
+#define MD_CA_PreSup           0x00001000 /* 1:Preamble Suppress                     */
 #define MD_CA_Busy             0x00000800 /* 1:Busy (Start Operation)        */
 #define MD_CA_Wr               0x00000400 /* 1:Write 0:Read                  */
 
@@ -296,7 +296,7 @@ struct BDesc {
 
 #define FD_ALIGN        16
 
-/* Frame Descripter bit asign ---------------------------------------------- */
+/* Frame Descripter bit assign ---------------------------------------------- */
 #define FD_FDLength_MASK       0x0000FFFF /* Length MASK                     */
 #define FD_BDCnt_MASK          0x001F0000 /* BD count MASK in FD             */
 #define FD_FrmOpt_MASK         0x7C000000 /* Frame option MASK               */
@@ -309,8 +309,8 @@ struct BDesc {
 #define FD_Next_EOL            0x00000001 /* FD EOL indicator                */
 #define FD_BDCnt_SHIFT         16
 
-/* Buffer Descripter bit asign --------------------------------------------- */
-#define BD_BuffLength_MASK     0x0000FFFF /* Recieve Data Size               */
+/* Buffer Descripter bit assign --------------------------------------------- */
+#define BD_BuffLength_MASK     0x0000FFFF /* Receive Data Size               */
 #define BD_RxBDID_MASK         0x00FF0000 /* BD ID Number MASK               */
 #define BD_RxBDSeqN_MASK       0x7F000000 /* Rx BD Sequence Number           */
 #define BD_CownsBD             0x80000000 /* BD Controller owner bit         */
@@ -339,7 +339,7 @@ struct BDesc {
 #define TX_THRESHOLD    1024
 /* used threshold with packet max byte for low pci transfer ability.*/
 #define TX_THRESHOLD_MAX 1536
-/* setting threshold max value when overrun error occured this count. */
+/* setting threshold max value when overrun error occurred this count. */
 #define TX_THRESHOLD_KEEP_LIMIT 10
 
 /* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index 3397618d4d9..8564ec5cfb7 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -645,7 +645,7 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
         if (cmd != SIOCDEVPRIVATE) {
                 error = copy_from_user(data, ifr->ifr_data, sizeof(data));
                 if (error) {
-                        pr_err("cant copy from user\n");
+                        pr_err("can't copy from user\n");
                         RET(-EFAULT);
                 }
                 DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
@@ -999,7 +999,7 @@ static inline void bdx_rxdb_free_elem(struct rxdb *db, int n)
  *
  * RxD fifo is smaller than RxF fifo by design. Upon high load, RxD will be
  * filled and packets will be dropped by nic without getting into host or
- * cousing interrupt. Anyway, in that condition, host has no chance to proccess
+ * cousing interrupt. Anyway, in that condition, host has no chance to process
  * all packets, but dropping in nic is cheaper, since it takes 0 cpu cycles
  */
 
@@ -1200,8 +1200,8 @@ static void bdx_recycle_skb(struct bdx_priv *priv, struct rxd_desc *rxdd)
         RET();
 }
 
-/* bdx_rx_receive - recieves full packets from RXD fifo and pass them to OS
- * NOTE: a special treatment is given to non-continous descriptors
+/* bdx_rx_receive - receives full packets from RXD fifo and pass them to OS
+ * NOTE: a special treatment is given to non-continuous descriptors
  * that start near the end, wraps around and continue at the beginning. a second
  * part is copied right after the first, and then descriptor is interpreted as
  * normal. fifo has an extra space to allow such operations
@@ -1584,9 +1584,9 @@ err_mem:
 }
 
 /*
- * bdx_tx_space - calculates avalable space in TX fifo
+ * bdx_tx_space - calculates available space in TX fifo
  * @priv - NIC private structure
- * Returns avaliable space in TX fifo in bytes
+ * Returns available space in TX fifo in bytes
  */
 static inline int bdx_tx_space(struct bdx_priv *priv)
 {
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index b6ba8601e2b..c5642fefc9e 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -502,7 +502,7 @@ struct txd_desc {
 #define  GMAC_RX_FILTER_ACRC  0x0010    /* accept crc error */
 #define  GMAC_RX_FILTER_AM    0x0008    /* accept multicast */
 #define  GMAC_RX_FILTER_AB    0x0004    /* accept broadcast */
-#define  GMAC_RX_FILTER_PRM   0x0001    /* [0:1] promiscous mode */
+#define  GMAC_RX_FILTER_PRM   0x0001    /* [0:1] promiscuous mode */
 
 #define  MAX_FRAME_AB_VAL       0x3fff  /* 13:0 */
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 73c942d85f0..b8c5f35577e 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -9712,7 +9712,7 @@ static int tg3_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
                 eeprom->len += b_count;
         }
 
-        /* read bytes upto the last 4 byte boundary */
+        /* read bytes up to the last 4 byte boundary */
         pd = &data[eeprom->len];
         for (i = 0; i < (len - (len & 3)); i += 4) {
                 ret = tg3_nvram_read_be32(tp, offset + i, &val);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 73884b69b74..5e96706ad10 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2130,7 +2130,7 @@
 #define MII_TG3_DSP_EXP96               0x0f96
 #define MII_TG3_DSP_EXP97               0x0f97
 
-#define MII_TG3_AUX_CTRL                0x18 /* auxilliary control register */
+#define MII_TG3_AUX_CTRL                0x18 /* auxiliary control register */
 
 #define MII_TG3_AUXCTL_PCTL_100TX_LPWR  0x0010
 #define MII_TG3_AUXCTL_PCTL_SPR_ISOLATE 0x0020
@@ -2146,7 +2146,7 @@
 #define MII_TG3_AUXCTL_ACTL_TX_6DB      0x0400
 #define MII_TG3_AUXCTL_SHDWSEL_AUXCTL   0x0000
 
-#define MII_TG3_AUX_STAT                0x19 /* auxilliary status register */
+#define MII_TG3_AUX_STAT                0x19 /* auxiliary status register */
 #define MII_TG3_AUX_STAT_LPASS          0x0004
 #define MII_TG3_AUX_STAT_SPDMASK        0x0700
 #define MII_TG3_AUX_STAT_10HALF         0x0100
diff --git a/drivers/net/tokenring/3c359.c b/drivers/net/tokenring/3c359.c
index 10800f16a23..8a3b191b195 100644
--- a/drivers/net/tokenring/3c359.c
+++ b/drivers/net/tokenring/3c359.c
@@ -208,7 +208,7 @@ static void print_rx_state(struct net_device *dev)
  *      passing/getting the next value from the nic. As with all requests
  *      on this nic it has to be done in two stages, a) tell the nic which
  *      memory address you want to access and b) pass/get the value from the nic.
- *      With the EEProm, you have to wait before and inbetween access a) and b).
+ *      With the EEProm, you have to wait before and between access a) and b).
  *      As this is only read at initialization time and the wait period is very 
  *      small we shouldn't have to worry about scheduling issues.
  */
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 785ad1a2157..2bedc0ace81 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -73,7 +73,7 @@ static void madgemc_setint(struct net_device *dev, int val);
 static irqreturn_t madgemc_interrupt(int irq, void *dev_id);
 
 /*
- * These work around paging, however they don't guarentee you're on the
+ * These work around paging, however they don't guarantee you're on the
  * right page.
  */
 #define SIFREADB(reg) (inb(dev->base_addr + ((reg<0x8)?reg:reg-0x8)))
@@ -387,7 +387,7 @@ getout:
  * both with their own disadvantages...
  *
  * 1)   Read in the SIFSTS register from the TMS controller.  This
- *      is guarenteed to be accurate, however, there's a fairly
+ *      is guaranteed to be accurate, however, there's a fairly
  *      large performance penalty for doing so: the Madge chips
  *      must request the register from the Eagle, the Eagle must
  *      read them from its internal bus, and then take the route
@@ -454,7 +454,7 @@ static irqreturn_t madgemc_interrupt(int irq, void *dev_id)
 }
 
 /*
- * Set the card to the prefered ring speed.
+ * Set the card to the preferred ring speed.
  *
  * Unlike newer cards, the MC16/32 have their speed selection
  * circuit connected to the Madge ASICs and not to the TMS380
diff --git a/drivers/net/tokenring/smctr.c b/drivers/net/tokenring/smctr.c
index 63db5a6762a..d9044aba7af 100644
--- a/drivers/net/tokenring/smctr.c
+++ b/drivers/net/tokenring/smctr.c
@@ -393,7 +393,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
         tp->rx_bdb_end[NON_MAC_QUEUE] = (BDBlock *)smctr_malloc(dev, 0);
 
         /* Allocate MAC transmit buffers.
-         * MAC Tx Buffers doen't have to be on an ODD Boundry.
+         * MAC Tx Buffers doen't have to be on an ODD Boundary.
          */
         tp->tx_buff_head[MAC_QUEUE]
                 = (__u16 *)smctr_malloc(dev, tp->tx_buff_size[MAC_QUEUE]);
@@ -415,7 +415,7 @@ static int smctr_alloc_shared_memory(struct net_device *dev)
 
         /* Allocate Non-MAC transmit buffers.
          * ?? For maximum Netware performance, put Tx Buffers on
-         * ODD Boundry and then restore malloc to Even Boundrys.
+         * ODD Boundary and then restore malloc to Even Boundrys.
          */
         smctr_malloc(dev, 1L);
         tp->tx_buff_head[NON_MAC_QUEUE]
@@ -1311,7 +1311,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev)
         mem_used += sizeof(BDBlock) * tp->num_rx_bdbs[MAC_QUEUE];
 
         /* Allocate MAC transmit buffers.
-         * MAC transmit buffers don't have to be on an ODD Boundry.
+         * MAC transmit buffers don't have to be on an ODD Boundary.
          */
         mem_used += tp->tx_buff_size[MAC_QUEUE];
 
@@ -1325,7 +1325,7 @@ static unsigned int smctr_get_num_rx_bdbs(struct net_device *dev)
 
         /* Allocate Non-MAC transmit buffers.
          * For maximum Netware performance, put Tx Buffers on
-         * ODD Boundry,and then restore malloc to Even Boundrys.
+         * ODD Boundary,and then restore malloc to Even Boundrys.
          */
         mem_used += 1L;
         mem_used += tp->tx_buff_size[NON_MAC_QUEUE];
@@ -3069,8 +3069,8 @@ static int smctr_load_node_addr(struct net_device *dev)
  * disabled.!?
  *
  * NOTE 2: If the monitor_state is MS_BEACON_TEST_STATE and the receive_mask
- * has any multi-cast or promiscous bits set, the receive_mask needs to
- * be changed to clear the multi-cast or promiscous mode bits, the lobe_test
+ * has any multi-cast or promiscuous bits set, the receive_mask needs to
+ * be changed to clear the multi-cast or promiscuous mode bits, the lobe_test
  * run, and then the receive mask set back to its original value if the test
  * is successful.
  */
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index 60b30ee38dc..e5a617c586c 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -442,7 +442,7 @@ typedef struct {
 #define PASS_FIRST_BUF_ONLY     0x0100  /* Passes only first internal buffer
                                          * of each received frame; FrameSize
                                          * of RPLs must contain internal
-                                         * BUFFER_SIZE bits for promiscous mode.
+                                         * BUFFER_SIZE bits for promiscuous mode.
                                          */
 #define ENABLE_FULL_DUPLEX_SELECTION    0x2000 
                                         /* Enable the use of full-duplex
diff --git a/drivers/net/tsi108_eth.h b/drivers/net/tsi108_eth.h
index 5a77ae6c5f3..5fee7d78dc6 100644
--- a/drivers/net/tsi108_eth.h
+++ b/drivers/net/tsi108_eth.h
@@ -305,9 +305,9 @@
 #define TSI108_TX_CRC   (1 << 5)        /* Generate CRC for this packet */
 #define TSI108_TX_INT   (1 << 14)       /* Generate an IRQ after frag. processed */
 #define TSI108_TX_RETRY (0xf << 16)     /* 4 bit field indicating num. of retries */
-#define TSI108_TX_COL   (1 << 20)       /* Set if a collision occured */
-#define TSI108_TX_LCOL  (1 << 24)       /* Set if a late collision occured */
-#define TSI108_TX_UNDER (1 << 25)       /* Set if a FIFO underrun occured */
+#define TSI108_TX_COL   (1 << 20)       /* Set if a collision occurred */
+#define TSI108_TX_LCOL  (1 << 24)       /* Set if a late collision occurred */
+#define TSI108_TX_UNDER (1 << 25)       /* Set if a FIFO underrun occurred */
 #define TSI108_TX_RLIM  (1 << 26)       /* Set if the retry limit was reached */
 #define TSI108_TX_OK    (1 << 30)       /* Set if the frame TX was successful */
 #define TSI108_TX_OWN   (1 << 31)       /* Set if the device owns the descriptor */
@@ -332,7 +332,7 @@ typedef struct {
 #define TSI108_RX_RUNT  (1 << 4)/* Packet is less than minimum size */
 #define TSI108_RX_HASH  (1 << 7)/* Hash table match */
 #define TSI108_RX_BAD   (1 << 8)        /* Bad frame */
-#define TSI108_RX_OVER  (1 << 9)        /* FIFO overrun occured */
+#define TSI108_RX_OVER  (1 << 9)        /* FIFO overrun occurred */
 #define TSI108_RX_TRUNC (1 << 11)       /* Packet truncated due to excess length */
 #define TSI108_RX_CRC   (1 << 12)       /* Packet had a CRC error */
 #define TSI108_RX_INT   (1 << 13)       /* Generate an IRQ after frag. processed */
diff --git a/drivers/net/tulip/de4x5.c b/drivers/net/tulip/de4x5.c
index 4dbd493b996..efaa1d69b72 100644
--- a/drivers/net/tulip/de4x5.c
+++ b/drivers/net/tulip/de4x5.c
@@ -79,7 +79,7 @@
     every  usable DECchip board,  I  pinched Donald's 'next_module' field to
     link my modules together.
 
-    Upto 15 EISA cards can be supported under this driver, limited primarily
+    Up to 15 EISA cards can be supported under this driver, limited primarily
     by the available IRQ lines.  I have  checked different configurations of
     multiple depca, EtherWORKS 3 cards and de4x5 cards and  have not found a
     problem yet (provided you have at least depca.c v0.38) ...
@@ -517,7 +517,7 @@ struct mii_phy {
     u_int mci;              /* 21142 MII Connector Interrupt info        */
 };
 
-#define DE4X5_MAX_PHY 8     /* Allow upto 8 attached PHY devices per board */
+#define DE4X5_MAX_PHY 8     /* Allow up to 8 attached PHY devices per board */
 
 struct sia_phy {
     u_char mc;              /* Media Code                                */
@@ -1436,7 +1436,7 @@ de4x5_sw_reset(struct net_device *dev)
 
     /* Poll for setup frame completion (adapter interrupts are disabled now) */
 
-    for (j=0, i=0;(i<500) && (j==0);i++) {       /* Upto 500ms delay */
+    for (j=0, i=0;(i<500) && (j==0);i++) {       /* Up to 500ms delay */
         mdelay(1);
         if ((s32)le32_to_cpu(lp->tx_ring[lp->tx_new].status) >= 0) j=1;
     }
diff --git a/drivers/net/tulip/dmfe.c b/drivers/net/tulip/dmfe.c
index 7064e035757..fb07f48910a 100644
--- a/drivers/net/tulip/dmfe.c
+++ b/drivers/net/tulip/dmfe.c
@@ -1224,7 +1224,7 @@ static void dmfe_timer(unsigned long data)
 
 
         /* If chip reports that link is failed it could be because external
-                PHY link status pin is not conected correctly to chip
+                PHY link status pin is not connected correctly to chip
                 To be sure ask PHY too.
         */
 
diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index 3031ed9c4a1..296486bf095 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -115,7 +115,7 @@ static void __devinit tulip_build_fake_mediatable(struct tulip_private *tp)
                           0x02,       /* phy reset sequence length */
                           0x01, 0x00, /* phy reset sequence */
                           0x00, 0x78, /* media capabilities */
-                          0x00, 0xe0, /* nway advertisment */
+                          0x00, 0xe0, /* nway advertisement */
                           0x00, 0x05, /* fdx bit map */
                           0x00, 0x06  /* ttm bit map */
                         };
diff --git a/drivers/net/typhoon.c b/drivers/net/typhoon.c
index 7fa5ec2de94..82653cb0785 100644
--- a/drivers/net/typhoon.c
+++ b/drivers/net/typhoon.c
@@ -846,7 +846,7 @@ typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
         if(typhoon_num_free_tx(txRing) < (numDesc + 2)) {
                 netif_stop_queue(dev);
 
-                /* A Tx complete IRQ could have gotten inbetween, making
+                /* A Tx complete IRQ could have gotten between, making
                  * the ring free again. Only need to recheck here, since
                  * Tx is serialized.
                  */
diff --git a/drivers/net/ucc_geth.h b/drivers/net/ucc_geth.h
index 055b87ab4f0..d12fcad145e 100644
--- a/drivers/net/ucc_geth.h
+++ b/drivers/net/ucc_geth.h
@@ -80,7 +80,7 @@ struct ucc_geth {
                                    frames) received that were between 128
                                    (Including FCS length==4) and 255 octets */
         u32 txok;               /* Total number of octets residing in frames
-                                   that where involved in successfull
+                                   that where involved in successful
                                    transmission */
         u16 txcf;               /* Total number of PAUSE control frames
                                    transmitted by this MAC */
@@ -759,7 +759,7 @@ struct ucc_geth_hardware_statistics {
                                    frames) received that were between 128
                                    (Including FCS length==4) and 255 octets */
         u32 txok;               /* Total number of octets residing in frames
-                                   that where involved in successfull
+                                   that where involved in successful
                                    transmission */
         u16 txcf;               /* Total number of PAUSE control frames
                                    transmitted by this MAC */
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
index 5f3b97668e6..55528476131 100644
--- a/drivers/net/usb/cdc_eem.c
+++ b/drivers/net/usb/cdc_eem.c
@@ -190,7 +190,7 @@ static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 
                 /*
                  * EEM packet header format:
-                 * b0..14:      EEM type dependant (Data or Command)
+                 * b0..14:      EEM type dependent (Data or Command)
                  * b15:         bmType
                  */
                 header = get_unaligned_le16(skb->data);
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 7dc84971f26..ad0298f9b5f 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -1221,7 +1221,7 @@ static void kaweth_disconnect(struct usb_interface *intf)
 
         usb_set_intfdata(intf, NULL);
         if (!kaweth) {
-                dev_warn(&intf->dev, "unregistering non-existant device\n");
+                dev_warn(&intf->dev, "unregistering non-existent device\n");
                 return;
         }
         netdev = kaweth->net;
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 5e7f069eab5..eb5d75df5d5 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1861,7 +1861,7 @@ static void rhine_restart_tx(struct net_device *dev) {
         u32 intr_status;
 
         /*
-         * If new errors occured, we need to sort them out before doing Tx.
+         * If new errors occurred, we need to sort them out before doing Tx.
          * In that case the ISR will be back here RSN anyway.
          */
         intr_status = get_intr_status(dev);
@@ -1887,7 +1887,7 @@ static void rhine_restart_tx(struct net_device *dev) {
                 /* This should never happen */
                 if (debug > 1)
                         printk(KERN_WARNING "%s: rhine_restart_tx() "
-                               "Another error occured %8.8x.\n",
+                               "Another error occurred %8.8x.\n",
                                dev->name, intr_status);
         }
 
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 0d6fec6b7d9..4fe05175384 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -292,7 +292,7 @@ VELOCITY_PARAM(DMA_length, "DMA length");
 /* IP_byte_align[] is used for IP header DWORD byte aligned
    0: indicate the IP header won't be DWORD byte aligned.(Default) .
    1: indicate the IP header will be DWORD byte aligned.
-      In some enviroment, the IP header should be DWORD byte aligned,
+      In some environment, the IP header should be DWORD byte aligned,
       or the packet will be droped when we receive it. (eg: IPVS)
 */
 VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
@@ -1994,7 +1994,7 @@ static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
  *      @dev: network device
  *
  *      Replace the current skb that is scheduled for Rx processing by a
- *      shorter, immediatly allocated skb, if the received packet is small
+ *      shorter, immediately allocated skb, if the received packet is small
  *      enough. This function returns a negative value if the received
  *      packet is too big or if memory is exhausted.
  */
diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c
index cc14b4a7504..0d47c3a0530 100644
--- a/drivers/net/vmxnet3/vmxnet3_drv.c
+++ b/drivers/net/vmxnet3/vmxnet3_drv.c
@@ -892,7 +892,7 @@ vmxnet3_prepare_tso(struct sk_buff *skb,
  * Transmits a pkt thru a given tq
  * Returns:
  *    NETDEV_TX_OK:      descriptors are setup successfully
- *    NETDEV_TX_OK:      error occured, the pkt is dropped
+ *    NETDEV_TX_OK:      error occurred, the pkt is dropped
  *    NETDEV_TX_BUSY:    tx ring is full, queue is stopped
  *
  * Side-effects:
@@ -2685,7 +2685,7 @@ vmxnet3_read_mac_addr(struct vmxnet3_adapter *adapter, u8 *mac)
  * Enable MSIx vectors.
  * Returns :
  *      0 on successful enabling of required vectors,
- *      VMXNET3_LINUX_MIN_MSIX_VECT when only minumum number of vectors required
+ *      VMXNET3_LINUX_MIN_MSIX_VECT when only minimum number of vectors required
  *       could be enabled.
  *      number of vectors which can be enabled otherwise (this number is smaller
  *       than VMXNET3_LINUX_MIN_MSIX_VECT)
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index e74e4b42592..401bebf5950 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -187,7 +187,7 @@ vxge_hw_vpath_fw_api(struct __vxge_hw_virtualpath *vpath, u32 action,
                                            VXGE_HW_DEF_DEVICE_POLL_MILLIS);
 
         /* The __vxge_hw_device_register_poll can udelay for a significant
-         * amount of time, blocking other proccess from the CPU.  If it delays
+         * amount of time, blocking other process from the CPU.  If it delays
          * for ~5secs, a NMI error can occur.  A way around this is to give up
          * the processor via msleep, but this is not allowed is under lock.
          * So, only allow it to sleep for ~4secs if open.  Otherwise, delay for
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 395423aeec0..aff68c1118d 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -2282,7 +2282,7 @@ vxge_alarm_msix_handle(int irq, void *dev_id)
                 VXGE_HW_VPATH_MSIX_ACTIVE) + VXGE_ALARM_MSIX_ID;
 
         for (i = 0; i < vdev->no_of_vpath; i++) {
-                /* Reduce the chance of loosing alarm interrupts by masking
+                /* Reduce the chance of losing alarm interrupts by masking
                  * the vector. A pending bit will be set if an alarm is
                  * generated and on unmask the interrupt will be fired.
                  */
@@ -2788,7 +2788,7 @@ static int vxge_open(struct net_device *dev)
         }
 
         /* Enable vpath to sniff all unicast/multicast traffic that not
-         * addressed to them. We allow promiscous mode for PF only
+         * addressed to them. We allow promiscuous mode for PF only
          */
 
         val64 = 0;
@@ -2890,7 +2890,7 @@ out0:
         return ret;
 }
 
-/* Loop throught the mac address list and delete all the entries */
+/* Loop through the mac address list and delete all the entries */
 static void vxge_free_mac_add_list(struct vxge_vpath *vpath)
 {
 
@@ -2957,7 +2957,7 @@ static int do_vxge_close(struct net_device *dev, int do_io)
                                         val64);
                 }
 
-                /* Remove the function 0 from promiscous mode */
+                /* Remove the function 0 from promiscuous mode */
                 vxge_hw_mgmt_reg_write(vdev->devh,
                         vxge_hw_mgmt_reg_type_mrpcim,
                         0,
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index 8674f331311..2638b8d97b8 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -1111,7 +1111,7 @@ void vxge_hw_channel_dtr_free(struct __vxge_hw_channel *channel, void *dtrh)
  * vxge_hw_channel_dtr_count
  * @channel: Channel handle. Obtained via vxge_hw_channel_open().
  *
- * Retreive number of DTRs available. This function can not be called
+ * Retrieve number of DTRs available. This function can not be called
  * from data path. ring_initial_replenishi() is the only user.
  */
 int vxge_hw_channel_dtr_count(struct __vxge_hw_channel *channel)
@@ -2060,7 +2060,7 @@ enum vxge_hw_status vxge_hw_vpath_promisc_enable(
 
         vpath = vp->vpath;
 
-        /* Enable promiscous mode for function 0 only */
+        /* Enable promiscuous mode for function 0 only */
         if (!(vpath->hldev->access_rights &
                 VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM))
                 return VXGE_HW_OK;
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 9d9dfda4c7a..6c2fc0b72af 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -681,7 +681,7 @@ struct vxge_hw_xmac_aggr_stats {
  * @rx_red_discard: Count of received frames that are discarded because of RED
  *            (Random Early Discard).
  * @rx_xgmii_ctrl_err_cnt: Maintains a count of unexpected or misplaced control
- *            characters occuring between times of normal data transmission
+ *            characters occurring between times of normal data transmission
  *            (i.e. not included in RX_XGMII_DATA_ERR_CNT). This counter is
  *            incremented when either -
  *            1) The Reconciliation Sublayer (RS) is expecting one control
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 10bafd59f9c..6fb6f8e667d 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -329,7 +329,7 @@ static int startmicrocode(struct cosa_data *cosa, int address);
 static int readmem(struct cosa_data *cosa, char __user *data, int addr, int len);
 static int cosa_reset_and_read_id(struct cosa_data *cosa, char *id);
 
-/* Auxilliary functions */
+/* Auxiliary functions */
 static int get_wait_data(struct cosa_data *cosa);
 static int put_wait_data(struct cosa_data *cosa, int data);
 static int puthexnumber(struct cosa_data *cosa, int number);
diff --git a/drivers/net/wan/dscc4.c b/drivers/net/wan/dscc4.c
index 4578e5b4b41..acb9ea83062 100644
--- a/drivers/net/wan/dscc4.c
+++ b/drivers/net/wan/dscc4.c
@@ -56,7 +56,7 @@
  * IV. Notes
  * The current error (XDU, RFO) recovery code is untested.
  * So far, RDO takes his RX channel down and the right sequence to enable it
- * again is still a mistery. If RDO happens, plan a reboot. More details
+ * again is still a mystery. If RDO happens, plan a reboot. More details
  * in the code (NB: as this happens, TX still works).
  * Don't mess the cables during operation, especially on DTE ports. I don't
  * suggest it for DCE either but at least one can get some messages instead
@@ -1065,7 +1065,7 @@ static int dscc4_open(struct net_device *dev)
 
         /*
          * Due to various bugs, there is no way to reliably reset a
-         * specific port (manufacturer's dependant special PCI #RST wiring
+         * specific port (manufacturer's dependent special PCI #RST wiring
          * apart: it affects all ports). Thus the device goes in the best
          * silent mode possible at dscc4_close() time and simply claims to
          * be up if it's opened again. It still isn't possible to change
@@ -1230,9 +1230,9 @@ static inline int dscc4_check_clock_ability(int port)
  *   scaling. Of course some rounding may take place.
  * - no high speed mode (40Mb/s). May be trivial to do but I don't have an
  *   appropriate external clocking device for testing.
- * - no time-slot/clock mode 5: shameless lazyness.
+ * - no time-slot/clock mode 5: shameless laziness.
  *
- * The clock signals wiring can be (is ?) manufacturer dependant. Good luck.
+ * The clock signals wiring can be (is ?) manufacturer dependent. Good luck.
  *
  * BIG FAT WARNING: if the device isn't provided enough clocking signal, it
  * won't pass the init sequence. For example, straight back-to-back DTE without
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 48edc5f4dac..e817583e6ec 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -15,7 +15,7 @@
  *      The hardware does the bus handling to avoid the need for delays between
  *      touching control registers.
  *
- *      Port B isnt wired (why - beats me)
+ *      Port B isn't wired (why - beats me)
  *
  *      Generic HDLC port Copyright (C) 2008 Krzysztof Halasa <khc@pm.waw.pl>
  */
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 6c571e19883..f1e1643dc3e 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -178,7 +178,7 @@
  *
  * The resulting average clock frequency (assuming 33.333 MHz oscillator) is:
  * freq = 66.666 MHz / (A + (B + 1) / (C + 1))
- * minumum freq = 66.666 MHz / (A + 1)
+ * minimum freq = 66.666 MHz / (A + 1)
  * maximum freq = 66.666 MHz / A
  *
  * Example: A = 2, B = 2, C = 7, CLOCK_CR register = 2 << 22 | 2 << 12 | 7
@@ -230,7 +230,7 @@
 #define PKT_PIPE_MODE_WRITE             0x57
 
 /* HDLC packet status values - desc->status */
-#define ERR_SHUTDOWN            1 /* stop or shutdown occurrance */
+#define ERR_SHUTDOWN            1 /* stop or shutdown occurrence */
 #define ERR_HDLC_ALIGN          2 /* HDLC alignment error */
 #define ERR_HDLC_FCS            3 /* HDLC Frame Check Sum error */
 #define ERR_RXFREE_Q_EMPTY      4 /* RX-free queue became empty while receiving
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 70feb84df67..b7f2358d23b 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -24,7 +24,7 @@
   *
   * Linux driver notes:
   * Linux uses the device struct lmc_private to pass private information
-  * arround.
+  * around.
   *
   * The initialization portion of this driver (the lmc_reset() and the
   * lmc_dec_reset() functions, as well as the led controls and the
diff --git a/drivers/net/wan/lmc/lmc_var.h b/drivers/net/wan/lmc/lmc_var.h
index 65d01978e78..01ad45218d1 100644
--- a/drivers/net/wan/lmc/lmc_var.h
+++ b/drivers/net/wan/lmc/lmc_var.h
@@ -180,7 +180,7 @@ struct lmc___ctl {
 
 
 /*
- * Carefull, look at the data sheet, there's more to this
+ * Careful, look at the data sheet, there's more to this
  * structure than meets the eye.  It should probably be:
  *
  * struct tulip_desc_t {
@@ -380,7 +380,7 @@ struct lmc___softc {
 /* CSR6 settings */
 #define OPERATION_MODE  0x00000200 /* Full Duplex      */
 #define PROMISC_MODE    0x00000040 /* Promiscuous Mode */
-#define RECIEVE_ALL     0x40000000 /* Recieve All      */
+#define RECIEVE_ALL     0x40000000 /* Receive All      */
 #define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames  */
 
 /* Dec control registers  CSR6 as well */
@@ -398,7 +398,7 @@ struct lmc___softc {
 #define TULIP_CMD_RECEIVEALL    0x40000000L /* (RW)  Receivel all frames? */
 #define TULIP_CMD_MUSTBEONE     0x02000000L /* (RW)  Must Be One (21140) */
 #define TULIP_CMD_TXTHRSHLDCTL  0x00400000L /* (RW)  Transmit Threshold Mode (21140) */
-#define TULIP_CMD_STOREFWD      0x00200000L /* (RW)  Store and Foward (21140) */
+#define TULIP_CMD_STOREFWD      0x00200000L /* (RW)  Store and Forward (21140) */
 #define TULIP_CMD_NOHEARTBEAT   0x00080000L /* (RW)  No Heartbeat (21140) */
 #define TULIP_CMD_PORTSELECT    0x00040000L /* (RW)  Post Select (100Mb) (21140) */
 #define TULIP_CMD_FULLDUPLEX    0x00000200L /* (RW)  Full Duplex Mode */
diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 93956861ea2..0806232e0f8 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -542,7 +542,7 @@ static void z8530_dma_tx(struct z8530_channel *chan)
                 z8530_tx(chan);
                 return;
         }
-        /* This shouldnt occur in DMA mode */
+        /* This shouldn't occur in DMA mode */
         printk(KERN_ERR "DMA tx - bogus event!\n");
         z8530_tx(chan);
 }
@@ -1219,7 +1219,7 @@ static const char *z8530_type_name[]={
  *      @io: the port value in question
  *
  *      Describe a Z8530 in a standard format. We must pass the I/O as
- *      the port offset isnt predictable. The main reason for this function
+ *      the port offset isn't predictable. The main reason for this function
  *      is to try and get a common format of report.
  */
 
@@ -1588,7 +1588,7 @@ static void z8530_rx_done(struct z8530_channel *c)
                 unsigned long flags;
                 
                 /*
-                 *      Complete this DMA. Neccessary to find the length
+                 *      Complete this DMA. Necessary to find the length
                  */             
                  
                 flags=claim_dma_lock();
@@ -1657,7 +1657,7 @@ static void z8530_rx_done(struct z8530_channel *c)
                  *      fifo length for this. Thus we want to flip to the new
                  *      buffer and then mess around copying and allocating
                  *      things. For the current case it doesn't matter but
-                 *      if you build a system where the sync irq isnt blocked
+                 *      if you build a system where the sync irq isn't blocked
                  *      by the kernel IRQ disable then you need only block the
                  *      sync IRQ for the RT_LOCK area.
                  *
diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c
index 12b84ed0e38..727d728649b 100644
--- a/drivers/net/wimax/i2400m/control.c
+++ b/drivers/net/wimax/i2400m/control.c
@@ -378,7 +378,7 @@ void i2400m_report_tlv_system_state(struct i2400m *i2400m,
  * the device's state as sometimes we need to do a link-renew (the BS
  * wants us to renew a DHCP lease, for example).
  *
- * In fact, doc says that everytime we get a link-up, we should do a
+ * In fact, doc says that every time we get a link-up, we should do a
  * DHCP negotiation...
  */
 static
@@ -675,7 +675,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code)
  *  - the ack message wasn't formatted correctly
  *
  * The returned skb has been allocated with wimax_msg_to_user_alloc(),
- * it contains the reponse in a netlink attribute and is ready to be
+ * it contains the response in a netlink attribute and is ready to be
  * passed up to user space with wimax_msg_to_user_send(). To access
  * the payload and its length, use wimax_msg_{data,len}() on the skb.
  *
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 65bc334ed57..47cae7150bc 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -654,7 +654,7 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
         if (result == -EUCLEAN) {
                 /*
                  * We come here because the reset during operational mode
-                 * wasn't successully done and need to proceed to a bus
+                 * wasn't successfully done and need to proceed to a bus
                  * reset. For the dev_reset_handle() to be able to handle
                  * the reset event later properly, we restore boot_mode back
                  * to the state before previous reset. ie: just like we are
@@ -755,7 +755,7 @@ EXPORT_SYMBOL_GPL(i2400m_error_recovery);
  * Alloc the command and ack buffers for boot mode
  *
  * Get the buffers needed to deal with boot mode messages.  These
- * buffers need to be allocated before the sdio recieve irq is setup.
+ * buffers need to be allocated before the sdio receive irq is setup.
  */
 static
 int i2400m_bm_buf_alloc(struct i2400m *i2400m)
diff --git a/drivers/net/wimax/i2400m/fw.c b/drivers/net/wimax/i2400m/fw.c
index 8b55a5b1415..85dadd5bf4b 100644
--- a/drivers/net/wimax/i2400m/fw.c
+++ b/drivers/net/wimax/i2400m/fw.c
@@ -54,7 +54,7 @@
  * endpoint and read from it in the notification endpoint. In SDIO we
  * talk to it via the write address and read from the read address.
  *
- * Upon entrance to boot mode, the device sends (preceeded with a few
+ * Upon entrance to boot mode, the device sends (preceded with a few
  * zero length packets (ZLPs) on the notification endpoint in USB) a
  * reboot barker (4 le32 words with the same value). We ack it by
  * sending the same barker to the device. The device acks with a
@@ -1589,7 +1589,7 @@ int i2400m_dev_bootstrap(struct i2400m *i2400m, enum i2400m_bri flags)
                 i2400m->fw_name = fw_name;
                 ret = i2400m_fw_bootstrap(i2400m, fw, flags);
                 release_firmware(fw);
-                if (ret >= 0)   /* firmware loaded succesfully */
+                if (ret >= 0)   /* firmware loaded successfully */
                         break;
                 i2400m->fw_name = NULL;
         }
diff --git a/drivers/net/wimax/i2400m/i2400m-usb.h b/drivers/net/wimax/i2400m/i2400m-usb.h
index eb80243e22d..6650fde99e1 100644
--- a/drivers/net/wimax/i2400m/i2400m-usb.h
+++ b/drivers/net/wimax/i2400m/i2400m-usb.h
@@ -105,14 +105,14 @@ static inline void edc_init(struct edc *edc)
  *
  * @edc: pointer to error density counter.
  * @max_err: maximum number of errors we can accept over the timeframe
- * @timeframe: lenght of the timeframe (in jiffies).
+ * @timeframe: length of the timeframe (in jiffies).
  *
  * Returns: !0 1 if maximum acceptable errors per timeframe has been
  *     exceeded. 0 otherwise.
  *
  * This is way to determine if the number of acceptable errors per time
  * period has been exceeded. It is not accurate as there are cases in which
- * this scheme will not work, for example if there are periodic occurences
+ * this scheme will not work, for example if there are periodic occurrences
  * of errors that straddle updates to the start time. This scheme is
  * sufficient for our usage.
  *
@@ -204,7 +204,7 @@ enum {
  *     usb_autopm_get/put_interface() barriers when executing
  *     commands. See doc in i2400mu_suspend() for more information.
  *
- * @rx_size_auto_shrink: if true, the rx_size is shrinked
+ * @rx_size_auto_shrink: if true, the rx_size is shrunk
  *     automatically based on the average size of the received
  *     transactions. This allows the receive code to allocate smaller
  *     chunks of memory and thus reduce pressure on the memory
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index 030cbfd3170..5eacc653a94 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -526,7 +526,7 @@ struct i2400m_barker_db;
  *
  * @barker: barker type that the device uses; this is initialized by
  *     i2400m_is_boot_barker() the first time it is called. Then it
- *     won't change during the life cycle of the device and everytime
+ *     won't change during the life cycle of the device and every time
  *     a boot barker is received, it is just verified for it being the
  *     same.
  *
@@ -928,7 +928,7 @@ extern void i2400m_report_tlv_rf_switches_status(
         struct i2400m *, const struct i2400m_tlv_rf_switches_status *);
 
 /*
- * Helpers for firmware backwards compability
+ * Helpers for firmware backwards compatibility
  *
  * As we aim to support at least the firmware version that was
  * released with the previous kernel/driver release, some code will be
diff --git a/drivers/net/wimax/i2400m/netdev.c b/drivers/net/wimax/i2400m/netdev.c
index 94742e1eafe..2edd8fe1c1f 100644
--- a/drivers/net/wimax/i2400m/netdev.c
+++ b/drivers/net/wimax/i2400m/netdev.c
@@ -166,7 +166,7 @@ void i2400m_wake_tx_work(struct work_struct *ws)
         d_fnstart(3, dev, "(ws %p i2400m %p skb %p)\n", ws, i2400m, skb);
         result = -EINVAL;
         if (skb == NULL) {
-                dev_err(dev, "WAKE&TX: skb dissapeared!\n");
+                dev_err(dev, "WAKE&TX: skb disappeared!\n");
                 goto out_put;
         }
         /* If we have, somehow, lost the connection after this was
diff --git a/drivers/net/wimax/i2400m/op-rfkill.c b/drivers/net/wimax/i2400m/op-rfkill.c
index 9e02b90b008..b0dba35a8ad 100644
--- a/drivers/net/wimax/i2400m/op-rfkill.c
+++ b/drivers/net/wimax/i2400m/op-rfkill.c
@@ -27,7 +27,7 @@
  * - report changes in the HW RF Kill switch [with
  *   wimax_rfkill_{sw,hw}_report(), which happens when we detect those
  *   indications coming through hardware reports]. We also do it on
- *   initialization to let the stack know the intial HW state.
+ *   initialization to let the stack know the initial HW state.
  *
  * - implement indications from the stack to change the SW RF Kill
  *   switch (coming from sysfs, the wimax stack or user space).
@@ -73,7 +73,7 @@ int i2400m_radio_is(struct i2400m *i2400m, enum wimax_rf_state state)
  * Generic Netlink will call this function when a message is sent from
  * userspace to change the software RF-Kill switch status.
  *
- * This function will set the device's sofware RF-Kill switch state to
+ * This function will set the device's software RF-Kill switch state to
  * match what is requested.
  *
  * NOTE: the i2400m has a strict state machine; we can only set the
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 844133b44af..2f94a872101 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -349,7 +349,7 @@ error_no_waiter:
  *
  * For reports: We can't clone the original skb where the data is
  * because we need to send this up via netlink; netlink has to add
- * headers and we can't overwrite what's preceeding the payload...as
+ * headers and we can't overwrite what's preceding the payload...as
  * it is another message. So we just dup them.
  */
 static
@@ -425,7 +425,7 @@ error_check:
  *
  * As in i2400m_rx_ctl(), we can't clone the original skb where the
  * data is because we need to send this up via netlink; netlink has to
- * add headers and we can't overwrite what's preceeding the
+ * add headers and we can't overwrite what's preceding the
  * payload...as it is another message. So we just dup them.
  */
 static
diff --git a/drivers/net/wimax/i2400m/tx.c b/drivers/net/wimax/i2400m/tx.c
index 3f819efc06b..4b30ed11d78 100644
--- a/drivers/net/wimax/i2400m/tx.c
+++ b/drivers/net/wimax/i2400m/tx.c
@@ -149,7 +149,7 @@
  * (with a moved message header to make sure it is size-aligned to
  * 16), TAIL room that was unusable (and thus is marked with a message
  * header that says 'skip this') and at the head of the buffer, an
- * imcomplete message with a couple of payloads.
+ * incomplete message with a couple of payloads.
  *
  * N   ___________________________________________________
  *    |                                                   |
@@ -819,7 +819,7 @@ EXPORT_SYMBOL_GPL(i2400m_tx);
  * the FIF that is ready for transmission.
  *
  * It sets the state in @i2400m to indicate the bus-specific driver is
- * transfering that message (i2400m->tx_msg_size).
+ * transferring that message (i2400m->tx_msg_size).
  *
  * Once the transfer is completed, call i2400m_tx_msg_sent().
  *
diff --git a/drivers/net/wimax/i2400m/usb-fw.c b/drivers/net/wimax/i2400m/usb-fw.c
index b58ec56b86f..1fda46c55eb 100644
--- a/drivers/net/wimax/i2400m/usb-fw.c
+++ b/drivers/net/wimax/i2400m/usb-fw.c
@@ -169,7 +169,7 @@ retry:
  *
  * Command can be a raw command, which requires no preparation (and
  * which might not even be following the command format). Checks that
- * the right amount of data was transfered.
+ * the right amount of data was transferred.
  *
  * To satisfy USB requirements (no onstack, vmalloc or in data segment
  * buffers), we copy the command to i2400m->bm_cmd_buf and send it from
diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c
index a26483a812a..e3257681e36 100644
--- a/drivers/net/wimax/i2400m/usb-rx.c
+++ b/drivers/net/wimax/i2400m/usb-rx.c
@@ -58,7 +58,7 @@
  *    a zillion reads; by serializing, we are throttling.
  *
  *  - RX data processing can get heavy enough so that it is not
- *    appropiate for doing it in the USB callback; thus we run it in a
+ *    appropriate for doing it in the USB callback; thus we run it in a
  *    process context.
  *
  * We provide a read buffer of an arbitrary size (short of a page); if
diff --git a/drivers/net/wimax/i2400m/usb-tx.c b/drivers/net/wimax/i2400m/usb-tx.c
index c65b9979f87..ac357acfb3e 100644
--- a/drivers/net/wimax/i2400m/usb-tx.c
+++ b/drivers/net/wimax/i2400m/usb-tx.c
@@ -168,7 +168,7 @@ retry:
 /*
  * Get the next TX message in the TX FIFO and send it to the device
  *
- * Note we exit the loop if i2400mu_tx() fails; that funtion only
+ * Note we exit the loop if i2400mu_tx() fails; that function only
  * fails on hard error (failing to tx a buffer not being one of them,
  * see its doc).
  *
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 57a79b0475f..4e5c7a11f04 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -1884,7 +1884,7 @@ static int airo_open(struct net_device *dev) {
         /* Make sure the card is configured.
          * Wireless Extensions may postpone config changes until the card
          * is open (to pipeline changes and speed-up card setup). If
-         * those changes are not yet commited, do it now - Jean II */
+         * those changes are not yet committed, do it now - Jean II */
         if (test_bit(FLAG_COMMIT, &ai->flags)) {
                 disable_MAC(ai, 1);
                 writeConfigRid(ai, 1);
@@ -1992,7 +1992,7 @@ static int mpi_send_packet (struct net_device *dev)
 /*
  * Magic, the cards firmware needs a length count (2 bytes) in the host buffer
  * right after  TXFID_HDR.The TXFID_HDR contains the status short so payloadlen
- * is immediatly after it. ------------------------------------------------
+ * is immediately after it. ------------------------------------------------
  *                         |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA|
  *                         ------------------------------------------------
  */
@@ -2006,7 +2006,7 @@ static int mpi_send_packet (struct net_device *dev)
                 sizeof(wifictlhdr8023) + 2 ;
 
         /*
-         * Firmware automaticly puts 802 header on so
+         * Firmware automatically puts 802 header on so
          * we don't need to account for it in the length
          */
         if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
@@ -2531,7 +2531,7 @@ static int mpi_init_descriptors (struct airo_info *ai)
 /*
  * We are setting up three things here:
  * 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid.
- * 2) Map PCI memory for issueing commands.
+ * 2) Map PCI memory for issuing commands.
  * 3) Allocate memory (shared) to send and receive ethernet frames.
  */
 static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci)
@@ -3947,7 +3947,7 @@ static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) {
 
         if ( max_tries == -1 ) {
                 airo_print_err(ai->dev->name,
-                        "Max tries exceeded when issueing command");
+                        "Max tries exceeded when issuing command");
                 if (IN4500(ai, COMMAND) & COMMAND_BUSY)
                         OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
                 return ERROR;
@@ -4173,7 +4173,7 @@ done:
 }
 
 /*  Note, that we are using BAP1 which is also used by transmit, so
- *  make sure this isnt called when a transmit is happening */
+ *  make sure this isn't called when a transmit is happening */
 static int PC4500_writerid(struct airo_info *ai, u16 rid,
                            const void *pBuf, int len, int lock)
 {
@@ -4776,7 +4776,7 @@ static int proc_stats_rid_open( struct inode *inode,
                 if (!statsLabels[i]) continue;
                 if (j+strlen(statsLabels[i])+16>4096) {
                         airo_print_warn(apriv->dev->name,
-                               "Potentially disasterous buffer overflow averted!");
+                               "Potentially disastrous buffer overflow averted!");
                         break;
                 }
                 j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i],
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index b761fec0d72..ccc2edaaeda 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -974,7 +974,7 @@ void ar9170_rx(struct ar9170 *ar, struct sk_buff *skb)
                         if (ar->rx_failover_missing <= 0) {
                                 /*
                                  * nested ar9170_rx call!
-                                 * termination is guranteed, even when the
+                                 * termination is guaranteed, even when the
                                  * combined frame also have a element with
                                  * a bad tag.
                                  */
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index 0dbfcf79ac9..aa8d06ba1ee 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -424,7 +424,7 @@ static u32 ar9170_get_default_phy_reg_val(u32 reg, bool is_2ghz, bool is_40mhz)
 
 /*
  * initialize some phy regs from eeprom values in modal_header[]
- * acc. to band and bandwith
+ * acc. to band and bandwidth
  */
 static int ar9170_init_phy_from_eeprom(struct ar9170 *ar,
                                 bool is_2ghz, bool is_40mhz)
diff --git a/drivers/net/wireless/ath/ath5k/ani.h b/drivers/net/wireless/ath/ath5k/ani.h
index d0a664039c8..03401539709 100644
--- a/drivers/net/wireless/ath/ath5k/ani.h
+++ b/drivers/net/wireless/ath/ath5k/ani.h
@@ -27,7 +27,7 @@
 #define ATH5K_ANI_RSSI_THR_HIGH         40
 #define ATH5K_ANI_RSSI_THR_LOW          7
 
-/* maximum availabe levels */
+/* maximum available levels */
 #define ATH5K_ANI_MAX_FIRSTEP_LVL       2
 #define ATH5K_ANI_MAX_NOISE_IMM_LVL     1
 
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 4d7f21ee111..349a5963931 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -1953,7 +1953,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
 
 #define FUDGE AR5K_TUNE_SW_BEACON_RESP + 3
         /* We use FUDGE to make sure the next TBTT is ahead of the current TU.
-         * Since we later substract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
+         * Since we later subtract AR5K_TUNE_SW_BEACON_RESP (10) in the timer
          * configuration we need to make sure it is bigger than that. */
 
         if (bc_tsf == -1) {
@@ -1971,7 +1971,7 @@ ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf)
                 intval |= AR5K_BEACON_RESET_TSF;
         } else if (bc_tsf > hw_tsf) {
                 /*
-                 * beacon received, SW merge happend but HW TSF not yet updated.
+                 * beacon received, SW merge happened but HW TSF not yet updated.
                  * not possible to reconfigure timers yet, but next time we
                  * receive a beacon with the same BSSID, the hardware will
                  * automatically update the TSF and then we need to reconfigure
@@ -2651,7 +2651,7 @@ ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
         synchronize_irq(sc->irq);
         stop_tasklets(sc);
 
-        /* Save ani mode and disable ANI durring
+        /* Save ani mode and disable ANI during
          * reset. If we don't we might get false
          * PHY error interrupts. */
         ani_mode = ah->ah_sc->ani_state.ani_mode;
diff --git a/drivers/net/wireless/ath/ath5k/desc.c b/drivers/net/wireless/ath/ath5k/desc.c
index 16b44ff7dd3..a8fcc94269f 100644
--- a/drivers/net/wireless/ath/ath5k/desc.c
+++ b/drivers/net/wireless/ath/ath5k/desc.c
@@ -51,7 +51,7 @@ ath5k_hw_setup_2word_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
         /*
          * Validate input
          * - Zero retries don't make sense.
-         * - A zero rate will put the HW into a mode where it continously sends
+         * - A zero rate will put the HW into a mode where it continuously sends
          *   noise on the channel, so it is important to avoid this.
          */
         if (unlikely(tx_tries0 == 0)) {
@@ -190,7 +190,7 @@ static int ath5k_hw_setup_4word_tx_desc(struct ath5k_hw *ah,
         /*
          * Validate input
          * - Zero retries don't make sense.
-         * - A zero rate will put the HW into a mode where it continously sends
+         * - A zero rate will put the HW into a mode where it continuously sends
          *   noise on the channel, so it is important to avoid this.
          */
         if (unlikely(tx_tries0 == 0)) {
@@ -300,7 +300,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
         /*
          * Rates can be 0 as long as the retry count is 0 too.
          * A zero rate and nonzero retry count will put the HW into a mode where
-         * it continously sends noise on the channel, so it is important to
+         * it continuously sends noise on the channel, so it is important to
          * avoid this.
          */
         if (unlikely((tx_rate1 == 0 && tx_tries1 != 0) ||
@@ -342,7 +342,7 @@ ath5k_hw_setup_mrr_tx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 \***********************/
 
 /*
- * Proccess the tx status descriptor on 5210/5211
+ * Process the tx status descriptor on 5210/5211
  */
 static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
                 struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -394,7 +394,7 @@ static int ath5k_hw_proc_2word_tx_status(struct ath5k_hw *ah,
 }
 
 /*
- * Proccess a tx status descriptor on 5212
+ * Process a tx status descriptor on 5212
  */
 static int ath5k_hw_proc_4word_tx_status(struct ath5k_hw *ah,
                 struct ath5k_desc *desc, struct ath5k_tx_status *ts)
@@ -519,7 +519,7 @@ int ath5k_hw_setup_rx_desc(struct ath5k_hw *ah, struct ath5k_desc *desc,
 }
 
 /*
- * Proccess the rx status descriptor on 5210/5211
+ * Process the rx status descriptor on 5210/5211
  */
 static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
                 struct ath5k_desc *desc, struct ath5k_rx_status *rs)
@@ -602,7 +602,7 @@ static int ath5k_hw_proc_5210_rx_status(struct ath5k_hw *ah,
 }
 
 /*
- * Proccess the rx status descriptor on 5212
+ * Process the rx status descriptor on 5212
  */
 static int ath5k_hw_proc_5212_rx_status(struct ath5k_hw *ah,
                                         struct ath5k_desc *desc,
diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c
index b6561f785c6..efb672cb31e 100644
--- a/drivers/net/wireless/ath/ath5k/eeprom.c
+++ b/drivers/net/wireless/ath/ath5k/eeprom.c
@@ -1080,7 +1080,7 @@ ath5k_eeprom_read_pcal_info_5112(struct ath5k_hw *ah, int mode)
  *
  * To recreate the curves we read here the points and interpolate
  * later. Note that in most cases only 2 (higher and lower) curves are
- * used (like RF5112) but vendors have the oportunity to include all
+ * used (like RF5112) but vendors have the opportunity to include all
  * 4 curves on eeprom. The final curve (higher power) has an extra
  * point for better accuracy like RF5112.
  */
@@ -1302,7 +1302,7 @@ ath5k_eeprom_read_pcal_info_2413(struct ath5k_hw *ah, int mode)
                         /*
                          * Pd gain 0 is not the last pd gain
                          * so it only has 2 pd points.
-                         * Continue wih pd gain 1.
+                         * Continue with pd gain 1.
                          */
                         pcinfo->pwr_i[1] = (val >> 10) & 0x1f;
 
diff --git a/drivers/net/wireless/ath/ath5k/pci.c b/drivers/net/wireless/ath/ath5k/pci.c
index 66598a0d1df..3c44689a700 100644
--- a/drivers/net/wireless/ath/ath5k/pci.c
+++ b/drivers/net/wireless/ath/ath5k/pci.c
@@ -57,7 +57,7 @@ static void ath5k_pci_read_cachesize(struct ath_common *common, int *csz)
         *csz = (int)u8tmp;
 
         /*
-         * This check was put in to avoid "unplesant" consequences if
+         * This check was put in to avoid "unpleasant" consequences if
          * the bootrom has not fully initialized all PCI devices.
          * Sometimes the cache line size register is not set
          */
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index a702817daf7..d9b3f828455 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -472,7 +472,7 @@ void ath5k_hw_set_rx_filter(struct ath5k_hw *ah, u32 filter)
         }
 
         /*
-         * The AR5210 uses promiscous mode to detect radar activity
+         * The AR5210 uses promiscuous mode to detect radar activity
          */
         if (ah->ah_version == AR5K_AR5210 &&
                         (filter & AR5K_RX_FILTER_RADARERR)) {
@@ -706,8 +706,8 @@ ath5k_check_timer_win(int a, int b, int window, int intval)
  * The need for this function arises from the fact that we have 4 separate
  * HW timer registers (TIMER0 - TIMER3), which are closely related to the
  * next beacon target time (NBTT), and that the HW updates these timers
- * seperately based on the current TSF value. The hardware increments each
- * timer by the beacon interval, when the local TSF coverted to TU is equal
+ * separately based on the current TSF value. The hardware increments each
+ * timer by the beacon interval, when the local TSF converted to TU is equal
  * to the value stored in the timer.
  *
  * The reception of a beacon with the same BSSID can update the local HW TSF
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 62ce2f4e860..55441913344 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -335,11 +335,11 @@ static void ath5k_hw_wait_for_synth(struct ath5k_hw *ah,
  * http://madwifi-project.org/ticket/1659
  * with various measurements and diagrams
  *
- * TODO: Deal with power drops due to probes by setting an apropriate
+ * TODO: Deal with power drops due to probes by setting an appropriate
  * tx power on the probe packets ! Make this part of the calibration process.
  */
 
-/* Initialize ah_gain durring attach */
+/* Initialize ah_gain during attach */
 int ath5k_hw_rfgain_opt_init(struct ath5k_hw *ah)
 {
         /* Initialize the gain optimization values */
@@ -1049,7 +1049,7 @@ static int ath5k_hw_rfregs_init(struct ath5k_hw *ah,
 \**************************/
 
 /*
- * Convertion needed for RF5110
+ * Conversion needed for RF5110
  */
 static u32 ath5k_hw_rf5110_chan2athchan(struct ieee80211_channel *channel)
 {
@@ -1088,7 +1088,7 @@ static int ath5k_hw_rf5110_channel(struct ath5k_hw *ah,
 }
 
 /*
- * Convertion needed for 5111
+ * Conversion needed for 5111
  */
 static int ath5k_hw_rf5111_chan2athchan(unsigned int ieee,
                 struct ath5k_athchan_2ghz *athchan)
@@ -2201,7 +2201,7 @@ ath5k_create_power_curve(s16 pmin, s16 pmax,
 /*
  * Get the surrounding per-channel power calibration piers
  * for a given frequency so that we can interpolate between
- * them and come up with an apropriate dataset for our current
+ * them and come up with an appropriate dataset for our current
  * channel.
  */
 static void
@@ -2618,7 +2618,7 @@ ath5k_write_pcdac_table(struct ath5k_hw *ah)
 /*
  * Set the gain boundaries and create final Power to PDADC table
  *
- * We can have up to 4 pd curves, we need to do a simmilar process
+ * We can have up to 4 pd curves, we need to do a similar process
  * as we do for RF5112. This time we don't have an edge_flag but we
  * set the gain boundaries on a separate register.
  */
@@ -2826,13 +2826,13 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
         u32 target = channel->center_freq;
         int pdg, i;
 
-        /* Get surounding freq piers for this channel */
+        /* Get surrounding freq piers for this channel */
         ath5k_get_chan_pcal_surrounding_piers(ah, channel,
                                                 &pcinfo_L,
                                                 &pcinfo_R);
 
         /* Loop over pd gain curves on
-         * surounding freq piers by index */
+         * surrounding freq piers by index */
         for (pdg = 0; pdg < ee->ee_pd_gains[ee_mode]; pdg++) {
 
                 /* Fill curves in reverse order
@@ -2923,7 +2923,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
                 }
 
                 /* Interpolate between curves
-                 * of surounding freq piers to
+                 * of surrounding freq piers to
                  * get the final curve for this
                  * pd gain. Re-use tmpL for interpolation
                  * output */
@@ -2947,7 +2947,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 
         /* Fill min and max power levels for this
          * channel by interpolating the values on
-         * surounding channels to complete the dataset */
+         * surrounding channels to complete the dataset */
         ah->ah_txpower.txp_min_pwr = ath5k_get_interpolated_value(target,
                                         (s16) pcinfo_L->freq,
                                         (s16) pcinfo_R->freq,
@@ -3179,7 +3179,7 @@ ath5k_hw_txpower(struct ath5k_hw *ah, struct ieee80211_channel *channel,
 
         /* FIXME: TPC scale reduction */
 
-        /* Get surounding channels for per-rate power table
+        /* Get surrounding channels for per-rate power table
          * calibration */
         ath5k_get_rate_pcal_data(ah, channel, &rate_info);
 
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index e1c9abd8c87..d12b827033c 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -132,8 +132,8 @@
  * As i can see in ar5k_ar5210_tx_start Reyk uses some of the values of BCR
  * for this register, so i guess TQ1V,TQ1FV and BDMAE have the same meaning
  * here and SNP/SNAP means "snapshot" (so this register gets synced with BCR).
- * So SNAPPEDBCRVALID sould also stand for "snapped BCR -values- valid", so i
- * renamed it to SNAPSHOTSVALID to make more sense. I realy have no idea what
+ * So SNAPPEDBCRVALID should also stand for "snapped BCR -values- valid", so i
+ * renamed it to SNAPSHOTSVALID to make more sense. I really have no idea what
  * else can it be. I also renamed SNPBCMD to SNPADHOC to match BCR.
  */
 #define AR5K_BSR                0x002c                  /* Register Address */
@@ -283,7 +283,7 @@
  */
 #define AR5K_ISR                0x001c                  /* Register Address [5210] */
 #define AR5K_PISR               0x0080                  /* Register Address [5211+] */
-#define AR5K_ISR_RXOK           0x00000001      /* Frame successfuly recieved */
+#define AR5K_ISR_RXOK           0x00000001      /* Frame successfuly received */
 #define AR5K_ISR_RXDESC         0x00000002      /* RX descriptor request */
 #define AR5K_ISR_RXERR          0x00000004      /* Receive error */
 #define AR5K_ISR_RXNOFRM        0x00000008      /* No frame received (receive timeout) */
@@ -372,12 +372,12 @@
 /*
  * Interrupt Mask Registers
  *
- * As whith ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
+ * As with ISRs 5210 has one IMR (AR5K_IMR) and 5211/5212 has one primary
  * (AR5K_PIMR) and 4 secondary IMRs (AR5K_SIMRx). Note that ISR/IMR flags match.
  */
 #define AR5K_IMR                0x0020                  /* Register Address [5210] */
 #define AR5K_PIMR               0x00a0                  /* Register Address [5211+] */
-#define AR5K_IMR_RXOK           0x00000001      /* Frame successfuly recieved*/
+#define AR5K_IMR_RXOK           0x00000001      /* Frame successfuly received*/
 #define AR5K_IMR_RXDESC         0x00000002      /* RX descriptor request*/
 #define AR5K_IMR_RXERR          0x00000004      /* Receive error*/
 #define AR5K_IMR_RXNOFRM        0x00000008      /* No frame received (receive timeout)*/
@@ -895,7 +895,7 @@
 #define AR5K_PCICFG_SL_INTEN            0x00000800      /* Enable interrupts when asleep */
 #define AR5K_PCICFG_LED_BCTL            0x00001000      /* Led blink (?) [5210] */
 #define AR5K_PCICFG_RETRY_FIX           0x00001000      /* Enable pci core retry fix */
-#define AR5K_PCICFG_SL_INPEN            0x00002000      /* Sleep even whith pending interrupts*/
+#define AR5K_PCICFG_SL_INPEN            0x00002000      /* Sleep even with pending interrupts*/
 #define AR5K_PCICFG_SPWR_DN             0x00010000      /* Mask for power status */
 #define AR5K_PCICFG_LEDMODE             0x000e0000      /* Ledmode [5211+] */
 #define AR5K_PCICFG_LEDMODE_PROP        0x00000000      /* Blink on standard traffic [5211+] */
diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
index ffcf44a4058..106c0b06cf5 100644
--- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c
@@ -142,7 +142,7 @@ static void ar5008_hw_force_bias(struct ath_hw *ah, u16 synth_freq)
 
 /**
  * ar5008_hw_set_channel - tune to a channel on the external AR2133/AR5133 radios
- * @ah: atheros hardware stucture
+ * @ah: atheros hardware structure
  * @chan:
  *
  * For the external AR2133/AR5133 radios, takes the MHz channel value and set
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 4a927180299..6eadf975ae4 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3240,7 +3240,7 @@ static int ar9300_compress_decision(struct ath_hw *ah,
                         eep = ar9003_eeprom_struct_find_by_id(reference);
                         if (eep == NULL) {
                                 ath_dbg(common, ATH_DBG_EEPROM,
-                                        "cant find reference eeprom struct %d\n",
+                                        "can't find reference eeprom struct %d\n",
                                         reference);
                                 return -1;
                         }
diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c
index c41ab8c3016..62e139a30a7 100644
--- a/drivers/net/wireless/ath/ath9k/htc_hst.c
+++ b/drivers/net/wireless/ath/ath9k/htc_hst.c
@@ -360,7 +360,7 @@ ret:
  * HTC Messages are handled directly here and the obtained SKB
  * is freed.
  *
- * Sevice messages (Data, WMI) passed to the corresponding
+ * Service messages (Data, WMI) passed to the corresponding
  * endpoint RX handlers, which have to free the SKB.
  */
 void ath9k_htc_rx_msg(struct htc_target *htc_handle,
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index e83128c50f7..9c65459be10 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -44,7 +44,7 @@ static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
         *csz = (int)u8tmp;
 
         /*
-         * This check was put in to avoid "unplesant" consequences if
+         * This check was put in to avoid "unpleasant" consequences if
          * the bootrom has not fully initialized all PCI devices.
          * Sometimes the cache line size register is not set
          */
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index a3241cd089b..4c0d36a6980 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -792,7 +792,7 @@ static void ath_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta,
 
                 tx_info->flags |= IEEE80211_TX_CTL_RATE_CTRL_PROBE;
         } else {
-                /* Set the choosen rate. No RTS for first series entry. */
+                /* Set the chosen rate. No RTS for first series entry. */
                 ath_rc_rate_set_series(rate_table, &rates[i++], txrc,
                                        try_per_rate, rix, 0);
         }
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 26734e53b37..88fa7fdffd0 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -628,8 +628,8 @@ static u32 ath_lookup_rate(struct ath_softc *sc, struct ath_buf *bf,
                                  (u32)ATH_AMPDU_LIMIT_MAX);
 
         /*
-         * h/w can accept aggregates upto 16 bit lengths (65535).
-         * The IE, however can hold upto 65536, which shows up here
+         * h/w can accept aggregates up to 16 bit lengths (65535).
+         * The IE, however can hold up to 65536, which shows up here
          * as zero. Ignore 65536 since we  are constrained by hw.
          */
         if (tid->an->maxampdu)
diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h
index c6a5fae634a..c01c43d8e61 100644
--- a/drivers/net/wireless/ath/carl9170/carl9170.h
+++ b/drivers/net/wireless/ath/carl9170/carl9170.h
@@ -161,7 +161,7 @@ struct carl9170_sta_tid {
  * Naturally: The higher the limit, the faster the device CAN send.
  * However, even a slight over-commitment at the wrong time and the
  * hardware is doomed to send all already-queued frames at suboptimal
- * rates. This in turn leads to an enourmous amount of unsuccessful
+ * rates. This in turn leads to an enormous amount of unsuccessful
  * retries => Latency goes up, whereas the throughput goes down. CRASH!
  */
 #define CARL9170_NUM_TX_LIMIT_HARD      ((AR9170_TXQ_DEPTH * 3) / 2)
diff --git a/drivers/net/wireless/ath/carl9170/phy.c b/drivers/net/wireless/ath/carl9170/phy.c
index b6b0de60050..b6ae0e179c8 100644
--- a/drivers/net/wireless/ath/carl9170/phy.c
+++ b/drivers/net/wireless/ath/carl9170/phy.c
@@ -427,7 +427,7 @@ static u32 carl9170_def_val(u32 reg, bool is_2ghz, bool is_40mhz)
 
 /*
  * initialize some phy regs from eeprom values in modal_header[]
- * acc. to band and bandwith
+ * acc. to band and bandwidth
  */
 static int carl9170_init_phy_from_eeprom(struct ar9170 *ar,
                                 bool is_2ghz, bool is_40mhz)
diff --git a/drivers/net/wireless/ath/carl9170/rx.c b/drivers/net/wireless/ath/carl9170/rx.c
index 84866a4b835..ec21ea9fd8d 100644
--- a/drivers/net/wireless/ath/carl9170/rx.c
+++ b/drivers/net/wireless/ath/carl9170/rx.c
@@ -849,7 +849,7 @@ static void carl9170_rx_stream(struct ar9170 *ar, void *buf, unsigned int len)
                                 /*
                                  * nested carl9170_rx_stream call!
                                  *
-                                 * termination is guranteed, even when the
+                                 * termination is guaranteed, even when the
                                  * combined frame also have an element with
                                  * a bad tag.
                                  */
diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
index f82c400be28..2fb53d06751 100644
--- a/drivers/net/wireless/ath/carl9170/usb.c
+++ b/drivers/net/wireless/ath/carl9170/usb.c
@@ -430,7 +430,7 @@ static void carl9170_usb_rx_complete(struct urb *urb)
                          * The system is too slow to cope with
                          * the enormous workload. We have simply
                          * run out of active rx urbs and this
-                         * unfortunatly leads to an unpredictable
+                         * unfortunately leads to an unpredictable
                          * device.
                          */
 
diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c
index 183c2828138..cc11d66f15b 100644
--- a/drivers/net/wireless/ath/hw.c
+++ b/drivers/net/wireless/ath/hw.c
@@ -86,7 +86,7 @@
  * IFRAME-01:  0110
  *
  * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
+ * will not pass our check. This is because the bssid_mask tells the
  * hardware to only look at the second least significant bit and the
  * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
  * as 1, which does not match 0.
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index f828f294ba8..0e1b8793c86 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -268,7 +268,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
         }
 
         /*
-         * If a country IE has been recieved check its rule for this
+         * If a country IE has been received check its rule for this
          * channel first before enabling active scan. The passive scan
          * would have been enforced by the initial processing of our
          * custom regulatory domain.
@@ -476,7 +476,7 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
                 wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY;
         } else {
                 /*
-                 * This gets applied in the case of the absense of CRDA,
+                 * This gets applied in the case of the absence of CRDA,
                  * it's our own custom world regulatory domain, similar to
                  * cfg80211's but we enable passive scanning.
                  */
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index 46e382ed46a..39a11e8af4f 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -439,7 +439,7 @@ static u8 mac_reader[] = {
 };
 
 struct atmel_private {
-        void *card; /* Bus dependent stucture varies for PCcard */
+        void *card; /* Bus dependent structure varies for PCcard */
         int (*present_callback)(void *); /* And callback which uses it */
         char firmware_id[32];
         AtmelFWType firmware_type;
@@ -3895,7 +3895,7 @@ static int reset_atmel_card(struct net_device *dev)
 
            This routine is also responsible for initialising some
            hardware-specific fields in the atmel_private structure,
-           including a copy of the firmware's hostinfo stucture
+           including a copy of the firmware's hostinfo structure
            which is the route into the rest of the firmware datastructures. */
 
         struct atmel_private *priv = netdev_priv(dev);
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index c96e19da294..05263516c11 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -99,7 +99,7 @@ static void atmel_detach(struct pcmcia_device *link)
 }
 
 /* Call-back function to interrogate PCMCIA-specific information
-   about the current existance of the card */
+   about the current existence of the card */
 static int card_present(void *arg)
 {
         struct pcmcia_device *link = (struct pcmcia_device *)arg;
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index bd4cb75b6ca..229f4388f79 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,7 +648,7 @@ struct b43_request_fw_context {
         char errors[B43_NR_FWTYPES][128];
         /* Temporary buffer for storing the firmware name. */
         char fwname[64];
-        /* A fatal error occured while requesting. Firmware reqest
+        /* A fatal error occurred while requesting. Firmware reqest
          * can not continue, as any other reqest will also fail. */
         int fatal_failure;
 };
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 57eb5b64973..d59b0168c14 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4010,7 +4010,7 @@ static int b43_wireless_core_start(struct b43_wldev *dev)
         b43_mac_enable(dev);
         b43_write32(dev, B43_MMIO_GEN_IRQ_MASK, dev->irq_mask);
 
-        /* Start maintainance work */
+        /* Start maintenance work */
         b43_periodic_tasks_setup(dev);
 
         b43_leds_init(dev);
diff --git a/drivers/net/wireless/b43/phy_g.h b/drivers/net/wireless/b43/phy_g.h
index 8569fdd4c6b..5413c906a3e 100644
--- a/drivers/net/wireless/b43/phy_g.h
+++ b/drivers/net/wireless/b43/phy_g.h
@@ -164,7 +164,7 @@ struct b43_phy_g {
         /* Current Interference Mitigation mode */
         int interfmode;
         /* Stack of saved values from the Interference Mitigation code.
-         * Each value in the stack is layed out as follows:
+         * Each value in the stack is laid out as follows:
          * bit 0-11:  offset
          * bit 12-15: register ID
          * bit 16-32: value
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 001e841f118..e789a89f104 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -703,7 +703,7 @@
 #define B43_NPHY_CHAN_ESTHANG                   B43_PHY_N(0x21D) /* Channel estimate hang */
 #define B43_NPHY_FINERX2_CGC                    B43_PHY_N(0x221) /* Fine RX 2 clock gate control */
 #define  B43_NPHY_FINERX2_CGC_DECGC             0x0008 /* Decode gated clocks */
-#define B43_NPHY_TXPCTL_INIT                    B43_PHY_N(0x222) /* TX power controll init */
+#define B43_NPHY_TXPCTL_INIT                    B43_PHY_N(0x222) /* TX power control init */
 #define  B43_NPHY_TXPCTL_INIT_PIDXI1            0x00FF /* Power index init 1 */
 #define  B43_NPHY_TXPCTL_INIT_PIDXI1_SHIFT      0
 #define B43_NPHY_PAPD_EN0                       B43_PHY_N(0x297) /* PAPD Enable0 TBD */
diff --git a/drivers/net/wireless/b43legacy/b43legacy.h b/drivers/net/wireless/b43legacy/b43legacy.h
index c81b2f53b0c..23583be1ee0 100644
--- a/drivers/net/wireless/b43legacy/b43legacy.h
+++ b/drivers/net/wireless/b43legacy/b43legacy.h
@@ -488,7 +488,7 @@ struct b43legacy_phy {
         /* Current Interference Mitigation mode */
         int interfmode;
         /* Stack of saved values from the Interference Mitigation code.
-         * Each value in the stack is layed out as follows:
+         * Each value in the stack is laid out as follows:
          * bit 0-11:  offset
          * bit 12-15: register ID
          * bit 16-32: value
diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c
index 18d63f57777..3d05dc15c6b 100644
--- a/drivers/net/wireless/hostap/hostap_ap.c
+++ b/drivers/net/wireless/hostap/hostap_ap.c
@@ -2359,7 +2359,7 @@ int prism2_ap_get_sta_qual(local_info_t *local, struct sockaddr addr[],
 }
 
 
-/* Translate our list of Access Points & Stations to a card independant
+/* Translate our list of Access Points & Stations to a card independent
  * format that the Wireless Tools will understand - Jean II */
 int prism2_ap_translate_scan(struct net_device *dev,
                              struct iw_request_info *info, char *buffer)
diff --git a/drivers/net/wireless/hostap/hostap_ap.h b/drivers/net/wireless/hostap/hostap_ap.h
index 655ceeba961..334e2d0b8e1 100644
--- a/drivers/net/wireless/hostap/hostap_ap.h
+++ b/drivers/net/wireless/hostap/hostap_ap.h
@@ -114,7 +114,7 @@ struct sta_info {
  * has passed since last received frame from the station, a nullfunc data
  * frame is sent to the station. If this frame is not acknowledged and no other
  * frames have been received, the station will be disassociated after
- * AP_DISASSOC_DELAY. Similarily, a the station will be deauthenticated after
+ * AP_DISASSOC_DELAY. Similarly, a the station will be deauthenticated after
  * AP_DEAUTH_DELAY. AP_TIMEOUT_RESOLUTION is the resolution that is used with
  * max inactivity timer. */
 #define AP_MAX_INACTIVITY_SEC (5 * 60)
diff --git a/drivers/net/wireless/hostap/hostap_ioctl.c b/drivers/net/wireless/hostap/hostap_ioctl.c
index 6038633ef36..12de46407c7 100644
--- a/drivers/net/wireless/hostap/hostap_ioctl.c
+++ b/drivers/net/wireless/hostap/hostap_ioctl.c
@@ -1945,7 +1945,7 @@ static char * __prism2_translate_scan(local_info_t *local,
 }
 
 
-/* Translate scan data returned from the card to a card independant
+/* Translate scan data returned from the card to a card independent
  * format that the Wireless Tools will understand - Jean II */
 static inline int prism2_translate_scan(local_info_t *local,
                                         struct iw_request_info *info,
@@ -2043,7 +2043,7 @@ static inline int prism2_ioctl_giwscan_sta(struct net_device *dev,
                  * until results are ready for various reasons.
                  * First, managing wait queues is complex and racy
                  * (there may be multiple simultaneous callers).
-                 * Second, we grab some rtnetlink lock before comming
+                 * Second, we grab some rtnetlink lock before coming
                  * here (in dev_ioctl()).
                  * Third, the caller can wait on the Wireless Event
                  * - Jean II */
diff --git a/drivers/net/wireless/hostap/hostap_wlan.h b/drivers/net/wireless/hostap/hostap_wlan.h
index 1c66b3c1030..88dc6a52bdf 100644
--- a/drivers/net/wireless/hostap/hostap_wlan.h
+++ b/drivers/net/wireless/hostap/hostap_wlan.h
@@ -853,7 +853,7 @@ struct local_info {
         struct work_struct comms_qual_update;
 
         /* RSSI to dBm adjustment (for RX descriptor fields) */
-        int rssi_to_dBm; /* substract from RSSI to get approximate dBm value */
+        int rssi_to_dBm; /* subtract from RSSI to get approximate dBm value */
 
         /* BSS list / protected by local->lock */
         struct list_head bss_list;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 4b97f918daf..44307753587 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -63,7 +63,7 @@ When data is sent to the firmware, the first TBD is used to indicate to the
 firmware if a Command or Data is being sent.  If it is Command, all of the
 command information is contained within the physical address referred to by the
 TBD.  If it is Data, the first TBD indicates the type of data packet, number
-of fragments, etc.  The next TBD then referrs to the actual packet location.
+of fragments, etc.  The next TBD then refers to the actual packet location.
 
 The Tx flow cycle is as follows:
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 160881f234c..42c3fe37af6 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -1181,7 +1181,7 @@ static void ipw_led_shutdown(struct ipw_priv *priv)
 /*
  * The following adds a new attribute to the sysfs representation
  * of this device driver (i.e. a new file in /sys/bus/pci/drivers/ipw/)
- * used for controling the debug level.
+ * used for controlling the debug level.
  *
  * See the level definitions in ipw for details.
  */
@@ -3763,7 +3763,7 @@ static int ipw_queue_tx_init(struct ipw_priv *priv,
 
         q->txb = kmalloc(sizeof(q->txb[0]) * count, GFP_KERNEL);
         if (!q->txb) {
-                IPW_ERROR("vmalloc for auxilary BD structures failed\n");
+                IPW_ERROR("vmalloc for auxiliary BD structures failed\n");
                 return -ENOMEM;
         }
 
@@ -5581,7 +5581,7 @@ static int ipw_find_adhoc_network(struct ipw_priv *priv,
                 return 0;
         }
 
-        /* Verify privacy compatability */
+        /* Verify privacy compatibility */
         if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) !=
             ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) {
                 IPW_DEBUG_MERGE("Network '%s (%pM)' excluded "
@@ -5808,7 +5808,7 @@ static int ipw_best_network(struct ipw_priv *priv,
                 return 0;
         }
 
-        /* Verify privacy compatability */
+        /* Verify privacy compatibility */
         if (((priv->capability & CAP_PRIVACY_ON) ? 1 : 0) !=
             ((network->capability & WLAN_CAPABILITY_PRIVACY) ? 1 : 0)) {
                 IPW_DEBUG_ASSOC("Network '%s (%pM)' excluded "
@@ -8184,7 +8184,7 @@ static void ipw_handle_promiscuous_rx(struct ipw_priv *priv,
 static int is_network_packet(struct ipw_priv *priv,
                                     struct libipw_hdr_4addr *header)
 {
-        /* Filter incoming packets to determine if they are targetted toward
+        /* Filter incoming packets to determine if they are targeted toward
          * this network, discarding packets coming from ourselves */
         switch (priv->ieee->iw_mode) {
         case IW_MODE_ADHOC:     /* Header: Dest. | Source    | BSSID */
@@ -8340,9 +8340,9 @@ static void ipw_handle_mgmt_packet(struct ipw_priv *priv,
 }
 
 /*
- * Main entry function for recieving a packet with 80211 headers.  This
+ * Main entry function for receiving a packet with 80211 headers.  This
  * should be called when ever the FW has notified us that there is a new
- * skb in the recieve queue.
+ * skb in the receive queue.
  */
 static void ipw_rx(struct ipw_priv *priv)
 {
@@ -8683,7 +8683,7 @@ static int ipw_sw_reset(struct ipw_priv *priv, int option)
  * functions defined in ipw_main to provide the HW interaction.
  *
  * The exception to this is the use of the ipw_get_ordinal()
- * function used to poll the hardware vs. making unecessary calls.
+ * function used to poll the hardware vs. making unnecessary calls.
  *
  */
 
@@ -10419,7 +10419,7 @@ static void ipw_handle_promiscuous_tx(struct ipw_priv *priv,
 
         memset(&dummystats, 0, sizeof(dummystats));
 
-        /* Filtering of fragment chains is done agains the first fragment */
+        /* Filtering of fragment chains is done against the first fragment */
         hdr = (void *)txb->fragments[0]->data;
         if (libipw_is_management(le16_to_cpu(hdr->frame_control))) {
                 if (filter & IPW_PROM_NO_MGMT)
diff --git a/drivers/net/wireless/ipw2x00/libipw_rx.c b/drivers/net/wireless/ipw2x00/libipw_rx.c
index 0de1b189322..e5ad76cd77d 100644
--- a/drivers/net/wireless/ipw2x00/libipw_rx.c
+++ b/drivers/net/wireless/ipw2x00/libipw_rx.c
@@ -925,7 +925,7 @@ drop_free:
 static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
 
 /*
-* Make ther structure we read from the beacon packet has
+* Make the structure we read from the beacon packet to have
 * the right values
 */
 static int libipw_verify_qos_info(struct libipw_qos_information_element
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index d418b647be8..1c3a8cb186b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -1030,7 +1030,7 @@ int iwl_legacy_apm_init(struct iwl_priv *priv)
         /*
          * Enable HAP INTA (interrupt from management bus) to
          * wake device's PCI Express link L1a -> L0s
-         * NOTE:  This is no-op for 3945 (non-existant bit)
+         * NOTE:  This is no-op for 3945 (non-existent bit)
          */
         iwl_legacy_set_bit(priv, CSR_HW_IF_CONFIG_REG,
                                     CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
diff --git a/drivers/net/wireless/iwlegacy/iwl-fh.h b/drivers/net/wireless/iwlegacy/iwl-fh.h
index 4e20c7e5c88..6e6091816e3 100644
--- a/drivers/net/wireless/iwlegacy/iwl-fh.h
+++ b/drivers/net/wireless/iwlegacy/iwl-fh.h
@@ -436,7 +436,7 @@
  * @finished_rb_num [0:11] - Indicates the index of the current RB
  *      in which the last frame was written to
  * @finished_fr_num [0:11] - Indicates the index of the RX Frame
- *      which was transfered
+ *      which was transferred
  */
 struct iwl_rb_status {
         __le16 closed_rb_num;
diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c
index 60f597f796c..353234a02c6 100644
--- a/drivers/net/wireless/iwlegacy/iwl-scan.c
+++ b/drivers/net/wireless/iwlegacy/iwl-scan.c
@@ -143,7 +143,7 @@ static void iwl_legacy_do_scan_abort(struct iwl_priv *priv)
                 IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
                 iwl_legacy_force_scan_end(priv);
         } else
-                IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n");
+                IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
 }
 
 /**
diff --git a/drivers/net/wireless/iwlegacy/iwl-sta.c b/drivers/net/wireless/iwlegacy/iwl-sta.c
index 47c9da3834e..66f0fb2bbe0 100644
--- a/drivers/net/wireless/iwlegacy/iwl-sta.c
+++ b/drivers/net/wireless/iwlegacy/iwl-sta.c
@@ -110,7 +110,7 @@ static int iwl_legacy_process_add_sta_resp(struct iwl_priv *priv,
         /*
          * XXX: The MAC address in the command buffer is often changed from
          * the original sent to the device. That is, the MAC address
-         * written to the command buffer often is not the same MAC adress
+         * written to the command buffer often is not the same MAC address
          * read from the command buffer when the command returns. This
          * issue has not yet been resolved and this debugging is left to
          * observe the problem.
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
index b5cb3be0eb4..ed0148d714d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ict.c
@@ -69,7 +69,7 @@ int iwl_alloc_isr_ict(struct iwl_priv *priv)
         if (!priv->_agn.ict_tbl_vir)
                 return -ENOMEM;
 
-        /* align table to PAGE_SIZE boundry */
+        /* align table to PAGE_SIZE boundary */
         priv->_agn.aligned_ict_tbl_dma = ALIGN(priv->_agn.ict_tbl_dma, PAGE_SIZE);
 
         IWL_DEBUG_ISR(priv, "ict dma addr %Lx dma aligned %Lx diff %d\n",
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 6c30fa652e2..bafbe57c960 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -1040,7 +1040,7 @@ int iwl_apm_init(struct iwl_priv *priv)
         /*
          * Enable HAP INTA (interrupt from management bus) to
          * wake device's PCI Express link L1a -> L0s
-         * NOTE:  This is no-op for 3945 (non-existant bit)
+         * NOTE:  This is no-op for 3945 (non-existent bit)
          */
         iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
                                     CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h
index 55b8370bc6d..474009a244d 100644
--- a/drivers/net/wireless/iwlwifi/iwl-fh.h
+++ b/drivers/net/wireless/iwlwifi/iwl-fh.h
@@ -436,7 +436,7 @@
  * @finished_rb_num [0:11] - Indicates the index of the current RB
  *      in which the last frame was written to
  * @finished_fr_num [0:11] - Indicates the index of the RX Frame
- *      which was transfered
+ *      which was transferred
  */
 struct iwl_rb_status {
         __le16 closed_rb_num;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 3a4d9e6b042..914c77e4458 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -143,7 +143,7 @@ static void iwl_do_scan_abort(struct iwl_priv *priv)
                 IWL_DEBUG_SCAN(priv, "Send scan abort failed %d\n", ret);
                 iwl_force_scan_end(priv);
         } else
-                IWL_DEBUG_SCAN(priv, "Sucessfully send scan abort\n");
+                IWL_DEBUG_SCAN(priv, "Successfully send scan abort\n");
 }
 
 /**
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index 907ac890997..1cabcb39643 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -57,7 +57,7 @@
  *   This is due to the fact the host talks exclusively
  *   to the UMAC and so there needs to be a special UMAC
  *   command for talking to the LMAC.
- *   This is how a wifi command is layed out:
+ *   This is how a wifi command is laid out:
  *    ------------------------
  *   | iwm_udma_out_wifi_hdr  |
  *    ------------------------
@@ -72,7 +72,7 @@
  *   Those commands are handled by the device's bootrom,
  *   and are typically sent when the UMAC and the LMAC
  *   are not yet available.
- *    *   This is how a non-wifi command is layed out:
+ *    *   This is how a non-wifi command is laid out:
  *    ---------------------------
  *   | iwm_udma_out_nonwifi_hdr  |
  *    ---------------------------
diff --git a/drivers/net/wireless/iwmc3200wifi/tx.c b/drivers/net/wireless/iwmc3200wifi/tx.c
index 3216621fc55..be98074c060 100644
--- a/drivers/net/wireless/iwmc3200wifi/tx.c
+++ b/drivers/net/wireless/iwmc3200wifi/tx.c
@@ -197,7 +197,7 @@ int iwm_tx_credit_alloc(struct iwm_priv *iwm, int id, int nb)
         spin_lock(&iwm->tx_credit.lock);
 
         if (!iwm_tx_credit_ok(iwm, id, nb)) {
-                IWM_DBG_TX(iwm, DBG, "No credit avaliable for pool[%d]\n", id);
+                IWM_DBG_TX(iwm, DBG, "No credit available for pool[%d]\n", id);
                 ret = -ENOSPC;
                 goto out;
         }
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index 60fd1afe89a..1453eec82a9 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -70,7 +70,7 @@ rdrf
         These commands are used to read the MAC, BBP and RF registers from the
         card.  These commands take one parameter that specifies the offset
         location that is to be read.  This parameter must be specified in
-        hexadecimal (its possible to preceed preceding the number with a "0x").
+        hexadecimal (its possible to precede preceding the number with a "0x").
 
         Path: /sys/kernel/debug/libertas_wireless/ethX/registers/
 
@@ -84,7 +84,7 @@ wrrf
         These commands are used to write the MAC, BBP and RF registers in the
         card.  These commands take two parameters that specify the offset
         location and the value that is to be written. This parameters must
-        be specified in hexadecimal (its possible to preceed the number
+        be specified in hexadecimal (its possible to precede the number
         with a "0x").
 
         Usage:
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
index 30ef0351bfc..5caa2ac14d6 100644
--- a/drivers/net/wireless/libertas/cfg.c
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -1350,7 +1350,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev,
                  * we remove all keys like in the WPA/WPA2 setup,
                  * we just don't set RSN.
                  *
-                 * Therefore: fall-throught
+                 * Therefore: fall-through
                  */
         case WLAN_CIPHER_SUITE_TKIP:
         case WLAN_CIPHER_SUITE_CCMP:
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index fc8121190d3..8712cb213f2 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -913,7 +913,7 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
                 goto out3;
         }
 
-        /* Clear any interrupt cause that happend while sending
+        /* Clear any interrupt cause that happened while sending
          * firmware/initializing card */
         if_cs_write16(card, IF_CS_CARD_INT_CAUSE, IF_CS_BIT_MASK);
         if_cs_enable_ints(card);
diff --git a/drivers/net/wireless/libertas/if_spi.h b/drivers/net/wireless/libertas/if_spi.h
index 8b1417d3b71..d2ac1dcd7e2 100644
--- a/drivers/net/wireless/libertas/if_spi.h
+++ b/drivers/net/wireless/libertas/if_spi.h
@@ -66,7 +66,7 @@
 #define IF_SPI_HOST_INT_CTRL_REG 0x40   /* Host interrupt controller reg */
 
 #define IF_SPI_CARD_INT_CAUSE_REG 0x44  /* Card interrupt cause reg */
-#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interupt status reg */
+#define IF_SPI_CARD_INT_STATUS_REG 0x48 /* Card interrupt status reg */
 #define IF_SPI_CARD_INT_EVENT_MASK_REG 0x4C /* Card interrupt event mask */
 #define IF_SPI_CARD_INT_STATUS_MASK_REG 0x50 /* Card interrupt status mask */
 
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 56f439d5801..f4f4257a9d6 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -62,7 +62,7 @@ MODULE_PARM_DESC(fake_hw_scan, "Install fake (no-op) hw-scan handler");
  *      an intersection to occur but each device will still use their
  *      respective regulatory requested domains. Subsequent radios will
  *      use the resulting intersection.
- * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We acomplish
+ * @HWSIM_REGTEST_WORLD_ROAM: Used for testing the world roaming. We accomplish
  *      this by using a custom beacon-capable regulatory domain for the first
  *      radio. All other device world roam.
  * @HWSIM_REGTEST_CUSTOM_WORLD: Used for testing the custom world regulatory
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index b4772c1c613..3c7877a7c31 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -1031,7 +1031,7 @@ int __orinoco_hw_set_tkip_key(struct orinoco_private *priv, int key_idx,
         else
                 buf.tsc[4] = 0x10;
 
-        /* Wait upto 100ms for tx queue to empty */
+        /* Wait up to 100ms for tx queue to empty */
         for (k = 100; k > 0; k--) {
                 udelay(1000);
                 ret = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_TXQUEUEEMPTY,
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 356e6bb443a..a946991989c 100644
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -465,7 +465,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
 
                 if (slot < 0) {
                         /*
-                         * The device supports the choosen algorithm, but the
+                         * The device supports the chosen algorithm, but the
                          * firmware does not provide enough key slots to store
                          * all of them.
                          * But encryption offload for outgoing frames is always
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 7ecc0bda57b..6d9204fef90 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -287,7 +287,7 @@ static void p54spi_power_on(struct p54s_priv *priv)
         enable_irq(gpio_to_irq(p54spi_gpio_irq));
 
         /*
-         * need to wait a while before device can be accessed, the lenght
+         * need to wait a while before device can be accessed, the length
          * is just a guess
          */
         msleep(10);
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
index d44f8e20cce..266d45bf86f 100644
--- a/drivers/net/wireless/prism54/islpci_eth.c
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -113,7 +113,7 @@ islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
          * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
          * and add WDS address information */
         if (likely(((long) skb->data & 0x03) | init_wds)) {
-                /* get the number of bytes to add and re-allign */
+                /* get the number of bytes to add and re-align */
                 offset = (4 - (long) skb->data) & 0x03;
                 offset += init_wds ? 6 : 0;
 
@@ -342,7 +342,7 @@ islpci_eth_receive(islpci_private *priv)
                          priv->pci_map_rx_address[index],
                          MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
 
-        /* update the skb structure and allign the buffer */
+        /* update the skb structure and align the buffer */
         skb_put(skb, size);
         if (offset) {
                 /* shift the buffer allocation offset bytes to get the right frame */
diff --git a/drivers/net/wireless/rayctl.h b/drivers/net/wireless/rayctl.h
index 49d9b267bc0..d7646f299bd 100644
--- a/drivers/net/wireless/rayctl.h
+++ b/drivers/net/wireless/rayctl.h
@@ -578,7 +578,7 @@ struct tx_msg {
     UCHAR  var[1];
 };
 
-/****** ECF Receive Control Stucture (RCS) Area at Shared RAM offset 0x0800  */
+/****** ECF Receive Control Structure (RCS) Area at Shared RAM offset 0x0800  */
 /* Structures for command specific parameters (rcs.var) */
 struct rx_packet_cmd {
     UCHAR rx_data_ptr[2];
diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h
index 70b9abbdeb9..8fbc5fa965e 100644
--- a/drivers/net/wireless/rt2x00/rt2800.h
+++ b/drivers/net/wireless/rt2x00/rt2800.h
@@ -616,7 +616,7 @@
  * READ_CONTROL: 0 write BBP, 1 read BBP
  * BUSY: ASIC is busy executing BBP commands
  * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
- * BBP_RW_MODE: 0 serial, 1 paralell
+ * BBP_RW_MODE: 0 serial, 1 parallel
  */
 #define BBP_CSR_CFG                     0x101c
 #define BBP_CSR_CFG_VALUE               FIELD32(0x000000ff)
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 2ee6cebb9b2..dbf74d07d94 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -1518,7 +1518,7 @@ static void rt2800_config_channel_rf2xxx(struct rt2x00_dev *rt2x00dev,
         if (rf->channel > 14) {
                 /*
                  * When TX power is below 0, we should increase it by 7 to
-                 * make it a positive value (Minumum value is -7).
+                 * make it a positive value (Minimum value is -7).
                  * However this means that values between 0 and 7 have
                  * double meaning, and we should set a 7DBm boost flag.
                  */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index a3940d7300a..7f10239f56a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -484,13 +484,13 @@ struct rt2x00intf_conf {
         enum nl80211_iftype type;
 
         /*
-         * TSF sync value, this is dependant on the operation type.
+         * TSF sync value, this is dependent on the operation type.
          */
         enum tsf_sync sync;
 
         /*
-         * The MAC and BSSID addressess are simple array of bytes,
-         * these arrays are little endian, so when sending the addressess
+         * The MAC and BSSID addresses are simple array of bytes,
+         * these arrays are little endian, so when sending the addresses
          * to the drivers, copy the it into a endian-signed variable.
          *
          * Note that all devices (except rt2500usb) have 32 bits
@@ -1131,7 +1131,7 @@ void rt2x00queue_stop_queue(struct data_queue *queue);
  * @drop: True to drop all pending frames.
  *
  * This function will flush the queue. After this call
- * the queue is guarenteed to be empty.
+ * the queue is guaranteed to be empty.
  */
 void rt2x00queue_flush_queue(struct data_queue *queue, bool drop);
 
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index e7f67d5eda5..9416e36de29 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -60,7 +60,7 @@ void rt2x00lib_config_intf(struct rt2x00_dev *rt2x00dev,
          * Note that when NULL is passed as address we will send
          * 00:00:00:00:00 to the device to clear the address.
          * This will prevent the device being confused when it wants
-         * to ACK frames or consideres itself associated.
+         * to ACK frames or considers itself associated.
          */
         memset(conf.mac, 0, sizeof(conf.mac));
         if (mac)
diff --git a/drivers/net/wireless/rt2x00/rt2x00crypto.c b/drivers/net/wireless/rt2x00/rt2x00crypto.c
index 5e9074bf2b8..3f5688fbf3f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00crypto.c
+++ b/drivers/net/wireless/rt2x00/rt2x00crypto.c
@@ -237,7 +237,7 @@ void rt2x00crypto_rx_insert_iv(struct sk_buff *skb,
         }
 
         /*
-         * NOTE: Always count the payload as transfered,
+         * NOTE: Always count the payload as transferred,
          * even when alignment was set to zero. This is required
          * for determining the correct offset for the ICV data.
          */
diff --git a/drivers/net/wireless/rt2x00/rt2x00dump.h b/drivers/net/wireless/rt2x00/rt2x00dump.h
index 5d6e0b83151..063ebcce97f 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dump.h
+++ b/drivers/net/wireless/rt2x00/rt2x00dump.h
@@ -51,7 +51,7 @@
  *   [rt2x00dump header][hardware descriptor][ieee802.11 frame]
  *
  * rt2x00dump header: The description of the dumped frame, as well as
- *      additional information usefull for debugging. See &rt2x00dump_hdr.
+ *      additional information useful for debugging. See &rt2x00dump_hdr.
  * hardware descriptor: Descriptor that was used to receive or transmit
  *      the frame.
  * ieee802.11 frame: The actual frame that was received or transmitted.
diff --git a/drivers/net/wireless/rt2x00/rt2x00link.c b/drivers/net/wireless/rt2x00/rt2x00link.c
index c975b0a12e9..29abfdeb0b6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00link.c
+++ b/drivers/net/wireless/rt2x00/rt2x00link.c
@@ -283,7 +283,7 @@ void rt2x00link_start_tuner(struct rt2x00_dev *rt2x00dev)
         /**
          * While scanning, link tuning is disabled. By default
          * the most sensitive settings will be used to make sure
-         * that all beacons and probe responses will be recieved
+         * that all beacons and probe responses will be received
          * during the scan.
          */
         if (test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags))
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c
index 4b3c70eeef1..4358051bfe1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.c
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.c
@@ -546,7 +546,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb,
         }
 
         /*
-         * When DMA allocation is required we should guarentee to the
+         * When DMA allocation is required we should guarantee to the
          * driver that the DMA is aligned to a 4-byte boundary.
          * However some drivers require L2 padding to pad the payload
          * rather then the header. This could be a requirement for
@@ -689,7 +689,7 @@ void rt2x00queue_for_each_entry(struct data_queue *queue,
         spin_unlock_irqrestore(&queue->index_lock, irqflags);
 
         /*
-         * Start from the TX done pointer, this guarentees that we will
+         * Start from the TX done pointer, this guarantees that we will
          * send out all frames in the correct order.
          */
         if (index_start < index_end) {
@@ -883,7 +883,7 @@ void rt2x00queue_flush_queue(struct data_queue *queue, bool drop)
         }
 
         /*
-         * Check if driver supports flushing, we can only guarentee
+         * Check if driver supports flushing, we can only guarantee
          * full support for flushing if the driver is able
          * to cancel all pending frames (drop = true).
          */
diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h
index 0c8b0c69967..217861f8d95 100644
--- a/drivers/net/wireless/rt2x00/rt2x00queue.h
+++ b/drivers/net/wireless/rt2x00/rt2x00queue.h
@@ -344,8 +344,8 @@ struct txentry_desc {
  *      only be touched after the device has signaled it is done with it.
  * @ENTRY_DATA_PENDING: This entry contains a valid frame and is waiting
  *      for the signal to start sending.
- * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occured
- *      while transfering the data to the hardware. No TX status report will
+ * @ENTRY_DATA_IO_FAILED: Hardware indicated that an IO error occurred
+ *      while transferring the data to the hardware. No TX status report will
  *      be expected from the hardware.
  * @ENTRY_DATA_STATUS_PENDING: The entry has been send to the device and
  *      returned. It is now waiting for the status reporting before the
@@ -365,7 +365,7 @@ enum queue_entry_flags {
  * @flags: Entry flags, see &enum queue_entry_flags.
  * @queue: The data queue (&struct data_queue) to which this entry belongs.
  * @skb: The buffer which is currently being transmitted (for TX queue),
- *      or used to directly recieve data in (for RX queue).
+ *      or used to directly receive data in (for RX queue).
  * @entry_idx: The entry index number.
  * @priv_data: Private data belonging to this queue entry. The pointer
  *      points to data specific to a particular driver and queue type.
@@ -388,7 +388,7 @@ struct queue_entry {
  * @Q_INDEX: Index pointer to the current entry in the queue, if this entry is
  *      owned by the hardware then the queue is considered to be full.
  * @Q_INDEX_DMA_DONE: Index pointer for the next entry which will have been
- *      transfered to the hardware.
+ *      transferred to the hardware.
  * @Q_INDEX_DONE: Index pointer to the next entry which will be completed by
  *      the hardware and for which we need to run the txdone handler. If this
  *      entry is not owned by the hardware the queue is considered to be empty.
@@ -627,7 +627,7 @@ static inline int rt2x00queue_threshold(struct data_queue *queue)
 }
 
 /**
- * rt2x00queue_status_timeout - Check if a timeout occured for STATUS reports
+ * rt2x00queue_status_timeout - Check if a timeout occurred for STATUS reports
  * @queue: Queue to check.
  */
 static inline int rt2x00queue_status_timeout(struct data_queue *queue)
@@ -637,7 +637,7 @@ static inline int rt2x00queue_status_timeout(struct data_queue *queue)
 }
 
 /**
- * rt2x00queue_timeout - Check if a timeout occured for DMA transfers
+ * rt2x00queue_timeout - Check if a timeout occurred for DMA transfers
  * @queue: Queue to check.
  */
 static inline int rt2x00queue_dma_timeout(struct data_queue *queue)
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c
index fbe735f5b35..36f388f97d6 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.c
@@ -173,7 +173,7 @@ static void rt2x00usb_work_txdone_entry(struct queue_entry *entry)
         /*
          * If the transfer to hardware succeeded, it does not mean the
          * frame was send out correctly. It only means the frame
-         * was succesfully pushed to the hardware, we have no
+         * was successfully pushed to the hardware, we have no
          * way to determine the transmission status right now.
          * (Only indirectly by looking at the failed TX counters
          * in the register).
diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h
index 6aaf51fc7ad..e11c759ac9e 100644
--- a/drivers/net/wireless/rt2x00/rt2x00usb.h
+++ b/drivers/net/wireless/rt2x00/rt2x00usb.h
@@ -400,7 +400,7 @@ void rt2x00usb_flush_queue(struct data_queue *queue);
  * @rt2x00dev: Pointer to &struct rt2x00_dev
  *
  * Check the health of the USB communication and determine
- * if timeouts have occured. If this is the case, this function
+ * if timeouts have occurred. If this is the case, this function
  * will reset all communication to restore functionality again.
  */
 void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev);
diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c
index bb0c781f4a1..0d7d93e1d39 100644
--- a/drivers/net/wireless/rtlwifi/base.c
+++ b/drivers/net/wireless/rtlwifi/base.c
@@ -520,7 +520,7 @@ void rtl_get_tcb_desc(struct ieee80211_hw *hw,
                          *because hw will nerver use hw_rate
                          *when tcb_desc->use_driver_rate = false
                          *so we never set highest N rate here,
-                         *and N rate will all be controled by FW
+                         *and N rate will all be controlled by FW
                          *when tcb_desc->use_driver_rate = false
                          */
                         if (rtlmac->ht_enable) {
diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c
index 9cd7703c2a3..5938f6ee21e 100644
--- a/drivers/net/wireless/rtlwifi/pci.c
+++ b/drivers/net/wireless/rtlwifi/pci.c
@@ -395,7 +395,7 @@ static void rtl_pci_init_aspm(struct ieee80211_hw *hw)
          * 0 - Disable ASPM,
          * 1 - Enable ASPM without Clock Req,
          * 2 - Enable ASPM with Clock Req,
-         * 3 - Alwyas Enable ASPM with Clock Req,
+         * 3 - Always Enable ASPM with Clock Req,
          * 4 - Always Enable ASPM without Clock Req.
          * set defult to RTL8192CE:3 RTL8192E:2
          * */
diff --git a/drivers/net/wireless/rtlwifi/regd.c b/drivers/net/wireless/rtlwifi/regd.c
index 3336ca999df..d26f957981a 100644
--- a/drivers/net/wireless/rtlwifi/regd.c
+++ b/drivers/net/wireless/rtlwifi/regd.c
@@ -179,7 +179,7 @@ static void _rtl_reg_apply_active_scan_flags(struct wiphy *wiphy,
         }
 
         /*
-         *If a country IE has been recieved check its rule for this
+         *If a country IE has been received check its rule for this
          *channel first before enabling active scan. The passive scan
          *would have been enforced by the initial processing of our
          *custom regulatory domain.
diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h
index 01226f8e70f..07db95ff9bc 100644
--- a/drivers/net/wireless/rtlwifi/wifi.h
+++ b/drivers/net/wireless/rtlwifi/wifi.h
@@ -1555,7 +1555,7 @@ struct rtl_priv {
 
 
 /***************************************
-    Bluetooth Co-existance Related
+    Bluetooth Co-existence Related
 ****************************************/
 
 enum bt_ant_num {
diff --git a/drivers/net/wireless/wl1251/cmd.c b/drivers/net/wireless/wl1251/cmd.c
index 0ade4bd617c..81f164bc488 100644
--- a/drivers/net/wireless/wl1251/cmd.c
+++ b/drivers/net/wireless/wl1251/cmd.c
@@ -104,7 +104,7 @@ int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer)
  * @wl: wl struct
  * @id: acx id
  * @buf: buffer for the response, including all headers, must work with dma
- * @len: lenght of buf
+ * @len: length of buf
  */
 int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len)
 {
diff --git a/drivers/net/wireless/wl1251/rx.c b/drivers/net/wireless/wl1251/rx.c
index c1b3b3f03da..6af35265c90 100644
--- a/drivers/net/wireless/wl1251/rx.c
+++ b/drivers/net/wireless/wl1251/rx.c
@@ -179,7 +179,7 @@ static void wl1251_rx_body(struct wl1251 *wl,
         rx_buffer = skb_put(skb, length);
         wl1251_mem_read(wl, rx_packet_ring_addr, rx_buffer, length);
 
-        /* The actual lenght doesn't include the target's alignment */
+        /* The actual length doesn't include the target's alignment */
         skb->len = desc->length  - PLCP_HEADER_LENGTH;
 
         fc = (u16 *)skb->data;
diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index f0aa7ab97bf..96324336f93 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -359,7 +359,7 @@ int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
  * @wl: wl struct
  * @id: acx id
  * @buf: buffer for the response, including all headers, must work with dma
- * @len: lenght of buf
+ * @len: length of buf
  */
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len)
 {
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h
index 856a8a2fff4..8a8323896ee 100644
--- a/drivers/net/wireless/wl12xx/conf.h
+++ b/drivers/net/wireless/wl12xx/conf.h
@@ -497,7 +497,7 @@ struct conf_rx_settings {
 #define CONF_TX_RATE_RETRY_LIMIT       10
 
 /*
- * Rates supported for data packets when operating as AP. Note the absense
+ * Rates supported for data packets when operating as AP. Note the absence
  * of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop
  * one. The rate dropped is not mandatory under any operating mode.
  */
@@ -572,7 +572,7 @@ enum conf_tx_ac {
         CONF_TX_AC_BK = 1,         /* background */
         CONF_TX_AC_VI = 2,         /* video */
         CONF_TX_AC_VO = 3,         /* voice */
-        CONF_TX_AC_CTS2SELF = 4,   /* fictious AC, follows AC_VO */
+        CONF_TX_AC_CTS2SELF = 4,   /* fictitious AC, follows AC_VO */
         CONF_TX_AC_ANY_TID = 0x1f
 };
 
@@ -1169,7 +1169,7 @@ struct conf_memory_settings {
 
         /*
          * Minimum required free tx memory blocks in order to assure optimum
-         * performence
+         * performance
          *
          * Range: 0-120
          */
@@ -1177,7 +1177,7 @@ struct conf_memory_settings {
 
         /*
          * Minimum required free rx memory blocks in order to assure optimum
-         * performence
+         * performance
          *
          * Range: 0-120
          */
diff --git a/drivers/net/wireless/wl12xx/io.h b/drivers/net/wireless/wl12xx/io.h
index c1aac829208..00c771ea70b 100644
--- a/drivers/net/wireless/wl12xx/io.h
+++ b/drivers/net/wireless/wl12xx/io.h
@@ -94,7 +94,7 @@ static inline int wl1271_translate_addr(struct wl1271 *wl, int addr)
          * translated region.
          *
          * The translated regions occur next to each other in physical device
-         * memory, so just add the sizes of the preceeding address regions to
+         * memory, so just add the sizes of the preceding address regions to
          * get the offset to the new region.
          *
          * Currently, only the two first regions are addressed, and the
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3e5befe4d03..fc08f36fe1f 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -290,7 +290,7 @@ static void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest,
  *  \               \- IEEE 802.11 -/ \-------------- len --------------/
  *   \-struct wl3501_80211_tx_hdr--/   \-------- Ethernet Frame -------/
  *
- * Return = Postion in Card
+ * Return = Position in Card
  */
 static u16 wl3501_get_tx_buffer(struct wl3501_card *this, u16 len)
 {
@@ -1932,7 +1932,7 @@ static int wl3501_config(struct pcmcia_device *link)
         this->base_addr = dev->base_addr;
 
         if (!wl3501_get_flash_mac_addr(this)) {
-                printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n",
+                printk(KERN_WARNING "%s: Can't read MAC addr in flash ROM?\n",
                        dev->name);
                 unregister_netdev(dev);
                 goto failed;
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
index 0597d862fbd..e36117486c9 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_rf2959.c
@@ -169,7 +169,7 @@ static int rf2959_init_hw(struct zd_rf *rf)
                 { CR85,  0x00 }, { CR86,  0x10 }, { CR87,  0x2A },
                 { CR88,  0x10 }, { CR89,  0x24 }, { CR90,  0x18 },
                 /* { CR91,  0x18 }, */
-                /* should solve continous CTS frame problems */
+                /* should solve continuous CTS frame problems */
                 { CR91,  0x00 },
                 { CR92,  0x0a }, { CR93,  0x00 }, { CR94,  0x01 },
                 { CR95,  0x00 }, { CR96,  0x40 }, { CR97,  0x37 },
diff --git a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
index 9e74eb1b67d..ba0a0ccb1fa 100644
--- a/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
+++ b/drivers/net/wireless/zd1211rw/zd_rf_uw2453.c
@@ -353,7 +353,7 @@ static int uw2453_init_hw(struct zd_rf *rf)
         };
 
         static const u32 rv[] = {
-                UW2453_REGWRITE(4, 0x2b),    /* configure reciever gain */
+                UW2453_REGWRITE(4, 0x2b),    /* configure receiver gain */
                 UW2453_REGWRITE(5, 0x19e4f), /* configure transmitter gain */
                 UW2453_REGWRITE(6, 0xf81ad), /* enable RX/TX filter tuning */
                 UW2453_REGWRITE(7, 0x3fffe), /* disable TX gain in test mode */
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/xilinx_emaclite.c
index 2642af4ee49..372572c0adc 100644
--- a/drivers/net/xilinx_emaclite.c
+++ b/drivers/net/xilinx_emaclite.c
@@ -786,7 +786,7 @@ static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
  * @reg:        register number to write to
  * @val:        value to write to the register number specified by reg
  *
- * This fucntion waits till the device is ready to accept a new MDIO
+ * This function waits till the device is ready to accept a new MDIO
  * request and then writes the val to the MDIO Write Data register.
  */
 static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
diff --git a/drivers/net/znet.c b/drivers/net/znet.c
index ae07b3dfbcc..ec2800ff8d4 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/znet.c
@@ -652,7 +652,7 @@ static irqreturn_t znet_interrupt(int irq, void *dev_id)
                                         dev->stats.tx_errors++;
 
                                 /* Transceiver may be stuck if cable
-                                 * was removed while emiting a
+                                 * was removed while emitting a
                                  * packet. Flip it off, then on to
                                  * reset it. This is very empirical,
                                  * but it seems to work. */
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index c9db49c10f4..8b63a691a9e 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -676,7 +676,7 @@ int __init early_init_dt_scan_chosen(unsigned long node, const char *uname,
 
         early_init_dt_check_for_initrd(node);
 
-        /* Retreive command line */
+        /* Retrieve command line */
         p = of_get_flat_dt_prop(node, "bootargs", &l);
         if (p != NULL && l > 0)
                 strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index dcd7857784f..d35e300b0ad 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -136,7 +136,7 @@ EXPORT_SYMBOL(of_phy_find_device);
  * @hndlr: Link state callback for the network device
  * @iface: PHY data interface type
  *
- * Returns a pointer to the phy_device if successfull.  NULL otherwise
+ * Returns a pointer to the phy_device if successful.  NULL otherwise
  */
 struct phy_device *of_phy_connect(struct net_device *dev,
                                   struct device_node *phy_np,
diff --git a/drivers/parisc/pdc_stable.c b/drivers/parisc/pdc_stable.c
index 1062b8ffe24..246a92f677e 100644
--- a/drivers/parisc/pdc_stable.c
+++ b/drivers/parisc/pdc_stable.c
@@ -141,7 +141,7 @@ struct pdcspath_attribute paths_attr_##_name = { \
  * @entry: A pointer to an allocated pdcspath_entry.
  * 
  * The general idea is that you don't read from the Stable Storage every time
- * you access the files provided by the facilites. We store a copy of the
+ * you access the files provided by the facilities. We store a copy of the
  * content of the stable storage WRT various paths in these structs. We read
  * these structs when reading the files, and we will write to these structs when
  * writing to the files, and only then write them back to the Stable Storage.
@@ -213,7 +213,7 @@ pdcspath_store(struct pdcspath_entry *entry)
 
         /* addr, devpath and count must be word aligned */
         if (pdc_stable_write(entry->addr, devpath, sizeof(*devpath)) != PDC_OK) {
-                printk(KERN_ERR "%s: an error occured when writing to PDC.\n"
+                printk(KERN_ERR "%s: an error occurred when writing to PDC.\n"
                                 "It is likely that the Stable Storage data has been corrupted.\n"
                                 "Please check it carefully upon next reboot.\n", __func__);
                 WARN_ON(1);
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 855f389eea4..d92185a5523 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -142,7 +142,7 @@ config PARPORT_AX88796
           the AX88796 network controller chip. This code is also available
           as a module (say M), called parport_ax88796.
 
-          The driver is not dependant on the AX88796 network driver, and
+          The driver is not dependent on the AX88796 network driver, and
           should not interfere with the networking functions of the chip.
 
 config PARPORT_1284
diff --git a/drivers/parport/ieee1284.c b/drivers/parport/ieee1284.c
index 8901ecf6e03..f9fd4b33a54 100644
--- a/drivers/parport/ieee1284.c
+++ b/drivers/parport/ieee1284.c
@@ -355,7 +355,7 @@ int parport_negotiate (struct parport *port, int mode)
                 return 0;
         }
 
-        /* Go to compability forward idle mode */
+        /* Go to compatibility forward idle mode */
         if (port->ieee1284.mode != IEEE1284_MODE_COMPAT)
                 parport_ieee1284_terminate (port);
 
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 8d62fb76cd4..a3755ffc03d 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -1488,7 +1488,7 @@ static void __devinit winbond_check(int io, int key)
 
         outb(key, io);
         outb(key, io);     /* Write Magic Sequence to EFER, extended
-                              funtion enable register */
+                              function enable register */
         outb(0x20, io);    /* Write EFIR, extended function index register */
         devid = inb(io + 1);  /* Read EFDR, extended function data register */
         outb(0x21, io);
@@ -1527,7 +1527,7 @@ static void __devinit winbond_check2(int io, int key)
         x_oldid = inb(io + 2);
 
         outb(key, io);     /* Write Magic Byte to EFER, extended
-                              funtion enable register */
+                              function enable register */
         outb(0x20, io + 2);  /* Write EFIR, extended function index register */
         devid = inb(io + 2);  /* Read EFDR, extended function data register */
         outb(0x21, io + 1);
@@ -1569,7 +1569,7 @@ static void __devinit smsc_check(int io, int key)
 
         outb(key, io);
         outb(key, io);     /* Write Magic Sequence to EFER, extended
-                              funtion enable register */
+                              function enable register */
         outb(0x0d, io);    /* Write EFIR, extended function index register */
         oldid = inb(io + 1);  /* Read EFDR, extended function data register */
         outb(0x0e, io);
diff --git a/drivers/pci/hotplug/acpi_pcihp.c b/drivers/pci/hotplug/acpi_pcihp.c
index 3bc72d18b12..8f3faf343f7 100644
--- a/drivers/pci/hotplug/acpi_pcihp.c
+++ b/drivers/pci/hotplug/acpi_pcihp.c
@@ -351,7 +351,7 @@ int acpi_get_hp_hw_control_from_firmware(struct pci_dev *pdev, u32 flags)
          * To handle different BIOS behavior, we look for _OSC on a root
          * bridge preferentially (according to PCI fw spec). Later for
          * OSHP within the scope of the hotplug controller and its parents,
-         * upto the host bridge under which this controller exists.
+         * up to the host bridge under which this controller exists.
          */
         handle = acpi_find_root_bridge_handle(pdev);
         if (handle) {
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c
index e610cfe4f07..2f67e9bc2f9 100644
--- a/drivers/pci/hotplug/acpiphp_glue.c
+++ b/drivers/pci/hotplug/acpiphp_glue.c
@@ -585,7 +585,7 @@ static void remove_bridge(acpi_handle handle)
 
         /*
          * On root bridges with hotplug slots directly underneath (ie,
-         * no p2p bridge inbetween), we call cleanup_bridge(). 
+         * no p2p bridge between), we call cleanup_bridge(). 
          *
          * The else clause cleans up root bridges that either had no
          * hotplug slots at all, or had a p2p bridge underneath.
diff --git a/drivers/pci/hotplug/rpaphp_core.c b/drivers/pci/hotplug/rpaphp_core.c
index ef7411c660b..758adb5f47f 100644
--- a/drivers/pci/hotplug/rpaphp_core.c
+++ b/drivers/pci/hotplug/rpaphp_core.c
@@ -290,7 +290,7 @@ static int is_php_dn(struct device_node *dn, const int **indexes,
  * @dn: device node of slot
  *
  * This subroutine will register a hotplugable slot with the
- * PCI hotplug infrastructure. This routine is typicaly called
+ * PCI hotplug infrastructure. This routine is typically called
  * during boot time, if the hotplug slots are present at boot time,
  * or is called later, by the dlpar add code, if the slot is
  * being dynamically added during runtime.
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 7da3bef60d8..505c1c7075f 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -2265,7 +2265,7 @@ int __init init_dmars(void)
                 /*
                  * TBD:
                  * we could share the same root & context tables
-                 * amoung all IOMMU's. Need to Split it later.
+                 * among all IOMMU's. Need to Split it later.
                  */
                 ret = iommu_alloc_root_entry(iommu);
                 if (ret) {
diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c
index a22557b2028..3607faf28a4 100644
--- a/drivers/pci/intr_remapping.c
+++ b/drivers/pci/intr_remapping.c
@@ -289,7 +289,7 @@ int free_irte(int irq)
  * source validation type
  */
 #define SVT_NO_VERIFY           0x0  /* no verification is required */
-#define SVT_VERIFY_SID_SQ       0x1  /* verify using SID and SQ fiels */
+#define SVT_VERIFY_SID_SQ       0x1  /* verify using SID and SQ fields */
 #define SVT_VERIFY_BUS          0x2  /* verify bus of request-id */
 
 /*
diff --git a/drivers/pci/iova.c b/drivers/pci/iova.c
index 7914951ef29..9606e599a47 100644
--- a/drivers/pci/iova.c
+++ b/drivers/pci/iova.c
@@ -391,7 +391,7 @@ reserve_iova(struct iova_domain *iovad,
                                 break;
         }
 
-        /* We are here either becasue this is the first reserver node
+        /* We are here either because this is the first reserver node
          * or need to insert remaining non overlap addr range
          */
         iova = __insert_new_range(iovad, pfn_lo, pfn_hi);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index a8a277a2e0d..f8deb3e380a 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -645,7 +645,7 @@ pci_adjust_legacy_attr(struct pci_bus *b, enum pci_mmap_state mmap_type)
  * a per-bus basis.  This routine creates the files and ties them into
  * their associated read, write and mmap files from pci-sysfs.c
  *
- * On error unwind, but don't propogate the error to the caller
+ * On error unwind, but don't propagate the error to the caller
  * as it is ok to set up the PCI bus without these files.
  */
 void pci_create_legacy_files(struct pci_bus *b)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index bd80f637846..5129ed6d8fa 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -263,7 +263,7 @@ static void quirk_vialatency(struct pci_dev *dev)
          *      This happens to include the IDE controllers....
          *
          *      VIA only apply this fix when an SB Live! is present but under
-         *      both Linux and Windows this isnt enough, and we have seen
+         *      both Linux and Windows this isn't enough, and we have seen
          *      corruption without SB Live! but with things like 3 UDMA IDE
          *      controllers. So we ignore that bit of the VIA recommendation..
          */
@@ -2680,7 +2680,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HINT, 0x0020, quirk_hotplug_bridge);
  * This is a quirk for the Ricoh MMC controller found as a part of
  * some mulifunction chips.
 
- * This is very similiar and based on the ricoh_mmc driver written by
+ * This is very similar and based on the ricoh_mmc driver written by
  * Philip Langdale. Thank you for these magic sequences.
  *
  * These chips implement the four main memory card controllers (SD, MMC, MS, xD)
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index fc7906eaf22..3e447d0387b 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -54,7 +54,7 @@ static struct pccard_operations i82092aa_operations = {
         .set_mem_map            = i82092aa_set_mem_map,
 };
 
-/* The card can do upto 4 sockets, allocate a structure for each of them */
+/* The card can do up to 4 sockets, allocate a structure for each of them */
 
 struct socket_info {
         int     number;
diff --git a/drivers/pcmcia/pcmcia_resource.c b/drivers/pcmcia/pcmcia_resource.c
index 42fbf1a7557..fe77e822384 100644
--- a/drivers/pcmcia/pcmcia_resource.c
+++ b/drivers/pcmcia/pcmcia_resource.c
@@ -173,7 +173,7 @@ static int pcmcia_access_config(struct pcmcia_device *p_dev,
         c = p_dev->function_config;
 
         if (!(c->state & CONFIG_LOCKED)) {
-                dev_dbg(&p_dev->dev, "Configuration isnt't locked\n");
+                dev_dbg(&p_dev->dev, "Configuration isn't't locked\n");
                 mutex_unlock(&s->ops_mutex);
                 return -EACCES;
         }
diff --git a/drivers/pcmcia/pxa2xx_lubbock.c b/drivers/pcmcia/pxa2xx_lubbock.c
index 25afe637c65..c21888eebb5 100644
--- a/drivers/pcmcia/pxa2xx_lubbock.c
+++ b/drivers/pcmcia/pxa2xx_lubbock.c
@@ -187,7 +187,7 @@ lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
                          * We need to hack around the const qualifier as
                          * well to keep this ugly workaround localized and
                          * not force it to the rest of the code. Barf bags
-                         * avaliable in the seat pocket in front of you!
+                         * available in the seat pocket in front of you!
                          */
                         ((socket_state_t *)state)->Vcc = 50;
                         ((socket_state_t *)state)->Vpp = 50;
diff --git a/drivers/pcmcia/ti113x.h b/drivers/pcmcia/ti113x.h
index 9ffa97d0b16..a71789486cd 100644
--- a/drivers/pcmcia/ti113x.h
+++ b/drivers/pcmcia/ti113x.h
@@ -691,7 +691,7 @@ static int ti12xx_2nd_slot_empty(struct yenta_socket *socket)
                 /*
                  * those are either single or dual slot CB with additional functions
                  * like 1394, smartcard reader, etc. check the TIEALL flag for them
-                 * the TIEALL flag binds the IRQ of all functions toghether.
+                 * the TIEALL flag binds the IRQ of all functions together.
                  * we catch the single slot variants later.
                  */
                 sysctl = config_readl(socket, TI113X_SYSTEM_CONTROL);
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 6c12db50316..c2f4bd8013b 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -202,7 +202,7 @@ static int mid_read_temp(struct thermal_zone_device *tzd, unsigned long *temp)
        if (ret)
                return ret;
 
-       /* Shift bits to accomodate the lower two data bits */
+       /* Shift bits to accommodate the lower two data bits */
        adc_val = (data << 2);
        addr++;
 
diff --git a/drivers/pnp/card.c b/drivers/pnp/card.c
index 4a651f69e17..bc00693d0c7 100644
--- a/drivers/pnp/card.c
+++ b/drivers/pnp/card.c
@@ -320,7 +320,7 @@ void pnp_remove_card_device(struct pnp_dev *dev)
  * pnp_request_card_device - Searches for a PnP device under the specified card
  * @clink: pointer to the card link, cannot be NULL
  * @id: pointer to a PnP ID structure that explains the rules for finding the device
- * @from: Starting place to search from. If NULL it will start from the begining.
+ * @from: Starting place to search from. If NULL it will start from the beginning.
  */
 struct pnp_dev *pnp_request_card_device(struct pnp_card_link *clink,
                                         const char *id, struct pnp_dev *from)
@@ -369,7 +369,7 @@ err_out:
 
 /**
  * pnp_release_card_device - call this when the driver no longer needs the device
- * @dev: pointer to the PnP device stucture
+ * @dev: pointer to the PnP device structure
  */
 void pnp_release_card_device(struct pnp_dev *dev)
 {
diff --git a/drivers/pnp/pnpbios/bioscalls.c b/drivers/pnp/pnpbios/bioscalls.c
index 8591f6ab1b3..b859d16cf78 100644
--- a/drivers/pnp/pnpbios/bioscalls.c
+++ b/drivers/pnp/pnpbios/bioscalls.c
@@ -219,7 +219,7 @@ void pnpbios_print_status(const char *module, u16 status)
                        module);
                 break;
         case PNP_HARDWARE_ERROR:
-                printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occured\n",
+                printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occurred\n",
                        module);
                 break;
         default:
diff --git a/drivers/pps/Kconfig b/drivers/pps/Kconfig
index f0d3376b58b..258ca596e1b 100644
--- a/drivers/pps/Kconfig
+++ b/drivers/pps/Kconfig
@@ -35,7 +35,7 @@ config NTP_PPS
         depends on PPS && !NO_HZ
         help
           This option adds support for direct in-kernel time
-          syncronization using an external PPS signal.
+          synchronization using an external PPS signal.
 
           It doesn't work on tickless systems at the moment.
 
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 8000985d0e8..643697f7139 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -919,7 +919,7 @@ EXPORT_SYMBOL_GPL(ps3_disable_pm);
  * @offset: Offset in bytes from the start of the trace buffer.
  * @buf: Copy destination.
  * @count: Maximum count of bytes to copy.
- * @bytes_copied: Pointer to a variable that will recieve the number of
+ * @bytes_copied: Pointer to a variable that will receive the number of
  *  bytes copied to @buf.
  *
  * On error @buf will contain any successfully copied trace buffer data
@@ -974,7 +974,7 @@ EXPORT_SYMBOL_GPL(ps3_lpm_copy_tb);
  * @offset: Offset in bytes from the start of the trace buffer.
  * @buf: A __user copy destination.
  * @count: Maximum count of bytes to copy.
- * @bytes_copied: Pointer to a variable that will recieve the number of
+ * @bytes_copied: Pointer to a variable that will receive the number of
  *  bytes copied to @buf.
  *
  * On error @buf will contain any successfully copied trace buffer data
@@ -1074,7 +1074,7 @@ EXPORT_SYMBOL_GPL(ps3_disable_pm_interrupts);
 
 /**
  * ps3_lpm_open - Open the logical performance monitor device.
- * @tb_type: Specifies the type of trace buffer lv1 sould use for this lpm
+ * @tb_type: Specifies the type of trace buffer lv1 should use for this lpm
  *  instance, specified by one of enum ps3_lpm_tb_type.
  * @tb_cache: Optional user supplied buffer to use as the trace buffer cache.
  *  If NULL, the driver will allocate and manage an internal buffer.
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index d37c445f0ed..1b98367110c 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -80,7 +80,7 @@ static void __maybe_unused _dump_sm_header(
  *
  * Currently all messages received from the system manager are either
  * (16 bytes header + 8 bytes payload = 24 bytes) or (16 bytes header
- * + 16 bytes payload = 32 bytes).  This knowlege is used to simplify
+ * + 16 bytes payload = 32 bytes).  This knowledge is used to simplify
  * the logic.
  */
 
diff --git a/drivers/rapidio/rio-scan.c b/drivers/rapidio/rio-scan.c
index 3a59d5f018d..ee893581d4b 100644
--- a/drivers/rapidio/rio-scan.c
+++ b/drivers/rapidio/rio-scan.c
@@ -295,7 +295,7 @@ static int __devinit rio_add_device(struct rio_dev *rdev)
 }
 
 /**
- * rio_enable_rx_tx_port - enable input reciever and output transmitter of
+ * rio_enable_rx_tx_port - enable input receiver and output transmitter of
  * given port
  * @port: Master port associated with the RIO network
  * @local: local=1 select local port otherwise a far device is reached
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 3ffc6979d16..0fae51c4845 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1313,7 +1313,7 @@ static int _regulator_enable(struct regulator_dev *rdev)
                                 return -EINVAL;
 
                         /* Query before enabling in case configuration
-                         * dependant.  */
+                         * dependent.  */
                         ret = _regulator_get_enable_time(rdev);
                         if (ret >= 0) {
                                 delay = ret;
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index a8f4ecfb084..daff7fd0e95 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -262,7 +262,7 @@ static int __devinit max8952_pmic_probe(struct i2c_client *client,
 
         if (err) {
                 dev_warn(max8952->dev, "VID0/1 gpio invalid: "
-                                "DVS not avilable.\n");
+                                "DVS not available.\n");
                 max8952->vid0 = 0;
                 max8952->vid1 = 0;
                 /* Mark invalid */
diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c
index 8ec6b069a7f..23719f0acbf 100644
--- a/drivers/rtc/interface.c
+++ b/drivers/rtc/interface.c
@@ -454,7 +454,7 @@ EXPORT_SYMBOL_GPL(rtc_update_irq_enable);
  * @rtc: pointer to the rtc device
  *
  * This function is called when an AIE, UIE or PIE mode interrupt
- * has occured (or been emulated).
+ * has occurred (or been emulated).
  *
  * Triggers the registered irq_task function callback.
  */
diff --git a/drivers/rtc/rtc-at91rm9200.c b/drivers/rtc/rtc-at91rm9200.c
index 518a76ec71c..e39b77a4609 100644
--- a/drivers/rtc/rtc-at91rm9200.c
+++ b/drivers/rtc/rtc-at91rm9200.c
@@ -60,7 +60,7 @@ static void at91_rtc_decodetime(unsigned int timereg, unsigned int calreg,
         /*
          * The Calendar Alarm register does not have a field for
          * the year - so these will return an invalid value.  When an
-         * alarm is set, at91_alarm_year wille store the current year.
+         * alarm is set, at91_alarm_year will store the current year.
          */
         tm->tm_year  = bcd2bin(date & AT91_RTC_CENT) * 100;     /* century */
         tm->tm_year += bcd2bin((date & AT91_RTC_YEAR) >> 8);    /* year */
diff --git a/drivers/rtc/rtc-bfin.c b/drivers/rtc/rtc-bfin.c
index ca9cff85ab8..a0fc4cf42ab 100644
--- a/drivers/rtc/rtc-bfin.c
+++ b/drivers/rtc/rtc-bfin.c
@@ -20,9 +20,9 @@
  * write would be discarded and things quickly fall apart.
  *
  * To keep this delay from significantly degrading performance (we, in theory,
- * would have to sleep for up to 1 second everytime we wanted to write a
+ * would have to sleep for up to 1 second every time we wanted to write a
  * register), we only check the write pending status before we start to issue
- * a new write.  We bank on the idea that it doesnt matter when the sync
+ * a new write.  We bank on the idea that it doesn't matter when the sync
  * happens so long as we don't attempt another write before it does.  The only
  * time userspace would take this penalty is when they try and do multiple
  * operations right after another ... but in this case, they need to take the
diff --git a/drivers/rtc/rtc-lpc32xx.c b/drivers/rtc/rtc-lpc32xx.c
index ec8701ce99f..ae16250c762 100644
--- a/drivers/rtc/rtc-lpc32xx.c
+++ b/drivers/rtc/rtc-lpc32xx.c
@@ -240,7 +240,7 @@ static int __devinit lpc32xx_rtc_probe(struct platform_device *pdev)
         spin_lock_init(&rtc->lock);
 
         /*
-         * The RTC is on a seperate power domain and can keep it's state
+         * The RTC is on a separate power domain and can keep it's state
          * across a chip power cycle. If the RTC has never been previously
          * setup, then set it up now for the first time.
          */
diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c
index 9aae49139a0..b00aad2620d 100644
--- a/drivers/rtc/rtc-x1205.c
+++ b/drivers/rtc/rtc-x1205.c
@@ -573,7 +573,7 @@ static int x1205_probe(struct i2c_client *client,
 
         i2c_set_clientdata(client, rtc);
 
-        /* Check for power failures and eventualy enable the osc */
+        /* Check for power failures and eventually enable the osc */
         if ((err = x1205_get_status(client, &sr)) == 0) {
                 if (sr & X1205_SR_RTCF) {
                         dev_err(&client->dev,
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c
index 1654a24817b..87a0cf160fe 100644
--- a/drivers/s390/block/dasd_3990_erp.c
+++ b/drivers/s390/block/dasd_3990_erp.c
@@ -2207,7 +2207,7 @@ dasd_3990_erp_inspect_32(struct dasd_ccw_req * erp, char *sense)
  * DASD_3990_ERP_CONTROL_CHECK
  *
  * DESCRIPTION
- *   Does a generic inspection if a control check occured and sets up
+ *   Does a generic inspection if a control check occurred and sets up
  *   the related error recovery procedure
  *
  * PARAMETER
@@ -2250,7 +2250,7 @@ dasd_3990_erp_inspect(struct dasd_ccw_req *erp)
         struct dasd_ccw_req *erp_new = NULL;
         char *sense;
 
-        /* if this problem occured on an alias retry on base */
+        /* if this problem occurred on an alias retry on base */
         erp_new = dasd_3990_erp_inspect_alias(erp);
         if (erp_new)
                 return erp_new;
@@ -2282,7 +2282,7 @@ dasd_3990_erp_inspect(struct dasd_ccw_req *erp)
  * DASD_3990_ERP_ADD_ERP
  *
  * DESCRIPTION
- *   This funtion adds an additional request block (ERP) to the head of
+ *   This function adds an additional request block (ERP) to the head of
  *   the given cqr (or erp).
  *   For a command mode cqr the erp is initialized as an default erp
  *   (retry TIC).
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index cb6a67bc89f..42e1bf35f68 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -302,7 +302,7 @@ dasd_parse_keyword( char *parsestring ) {
 /*
  * Try to interprete the first element on the comma separated parse string
  * as a device number or a range of devices. If the interpretation is
- * successfull, create the matching dasd_devmap entries and return a pointer
+ * successful, create the matching dasd_devmap entries and return a pointer
  * to the residual string.
  * If interpretation fails or in case of an error, return an error code.
  */
diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c
index 459f2cbe80f..db8005d9f2f 100644
--- a/drivers/s390/block/dasd_eckd.c
+++ b/drivers/s390/block/dasd_eckd.c
@@ -2858,7 +2858,7 @@ static struct dasd_ccw_req *dasd_raw_build_cp(struct dasd_device *startdev,
         /*
          * struct PFX_eckd_data has up to 2 byte as extended parameter
          * this is needed for write full track and has to be mentioned
-         * seperately
+         * separately
          * add 8 instead of 2 to keep 8 byte boundary
          */
         pfx_datasize = sizeof(struct PFX_eckd_data) + 8;
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 4c023761946..e21a5c39ef2 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -604,7 +604,7 @@ __raw3270_size_device(struct raw3270 *rp)
         /*
          * To determine the size of the 3270 device we need to do:
          * 1) send a 'read partition' data stream to the device
-         * 2) wait for the attn interrupt that preceeds the query reply
+         * 2) wait for the attn interrupt that precedes the query reply
          * 3) do a read modified to get the query reply
          * To make things worse we have to cope with intervention
          * required (3270 device switched to 'stand-by') and command
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index e090a307fde..87cd0ab242d 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -139,7 +139,7 @@ tapechar_read(struct file *filp, char __user *data, size_t count, loff_t *ppos)
         /*
          * If the tape isn't terminated yet, do it now. And since we then
          * are at the end of the tape there wouldn't be anything to read
-         * anyways. So we return immediatly.
+         * anyways. So we return immediately.
          */
         if(device->required_tapemarks) {
                 return tape_std_terminate_write(device);
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
index d33554df2b0..2db1482b406 100644
--- a/drivers/s390/char/tty3270.c
+++ b/drivers/s390/char/tty3270.c
@@ -328,7 +328,7 @@ tty3270_write_callback(struct raw3270_request *rq, void *data)
 
         tp = (struct tty3270 *) rq->view;
         if (rq->rc != 0) {
-                /* Write wasn't successfull. Refresh all. */
+                /* Write wasn't successful. Refresh all. */
                 tp->update_flags = TTY_UPDATE_ALL;
                 tty3270_set_timer(tp, 1);
         }
diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c
index a845695ac31..6084103672b 100644
--- a/drivers/s390/cio/device_fsm.c
+++ b/drivers/s390/cio/device_fsm.c
@@ -318,7 +318,7 @@ ccw_device_sense_id_done(struct ccw_device *cdev, int err)
 
 /**
   * ccw_device_notify() - inform the device's driver about an event
-  * @cdev: device for which an event occured
+  * @cdev: device for which an event occurred
   * @event: event that occurred
   *
   * Returns:
@@ -688,7 +688,7 @@ ccw_device_online_verify(struct ccw_device *cdev, enum dev_event dev_event)
             (scsw_stctl(&cdev->private->irb.scsw) & SCSW_STCTL_STATUS_PEND)) {
                 /*
                  * No final status yet or final status not yet delivered
-                 * to the device driver. Can't do path verfication now,
+                 * to the device driver. Can't do path verification now,
                  * delay until final status was delivered.
                  */
                 cdev->private->flags.doverify = 1;
diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h
index 88ebd114735..9688f3985b0 100644
--- a/drivers/s390/crypto/zcrypt_api.h
+++ b/drivers/s390/crypto/zcrypt_api.h
@@ -76,7 +76,7 @@ struct ica_z90_status {
 
 /**
  * Large random numbers are pulled in 4096 byte chunks from the crypto cards
- * and stored in a page. Be carefull when increasing this buffer due to size
+ * and stored in a page. Be careful when increasing this buffer due to size
  * limitations for AP requests.
  */
 #define ZCRYPT_RNG_BUFFER_SIZE  4096
diff --git a/drivers/s390/net/claw.c b/drivers/s390/net/claw.c
index 9feb62febb3..da8aa75bb20 100644
--- a/drivers/s390/net/claw.c
+++ b/drivers/s390/net/claw.c
@@ -779,7 +779,7 @@ claw_irq_handler(struct ccw_device *cdev,
         case CLAW_START_WRITE:
                 if (p_ch->irb->scsw.cmd.dstat & DEV_STAT_UNIT_CHECK) {
                         dev_info(&cdev->dev,
-                                "%s: Unit Check Occured in "
+                                "%s: Unit Check Occurred in "
                                 "write channel\n", dev->name);
                         clear_bit(0, (void *)&p_ch->IO_active);
                         if (p_ch->irb->ecw[0] & 0x80) {
diff --git a/drivers/s390/net/ctcm_fsms.c b/drivers/s390/net/ctcm_fsms.c
index 8c921fc3511..2d602207541 100644
--- a/drivers/s390/net/ctcm_fsms.c
+++ b/drivers/s390/net/ctcm_fsms.c
@@ -184,7 +184,7 @@ static void ctcmpc_chx_resend(fsm_instance *, int, void *);
 static void ctcmpc_chx_send_sweep(fsm_instance *fsm, int event, void *arg);
 
 /**
- * Check return code of a preceeding ccw_device call, halt_IO etc...
+ * Check return code of a preceding ccw_device call, halt_IO etc...
  *
  * ch   :       The channel, the error belongs to.
  * Returns the error code (!= 0) to inspect.
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index 7fbc4adbb6d..49d1cfc3217 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -1123,7 +1123,7 @@ list_modified:
         list_for_each_entry_safe(ipm, tmp, &card->ipm_list, list){
                 switch (ipm->ipm_state) {
                 case LCS_IPM_STATE_SET_REQUIRED:
-                        /* del from ipm_list so noone else can tamper with
+                        /* del from ipm_list so no one else can tamper with
                          * this entry */
                         list_del_init(&ipm->list);
                         spin_unlock_irqrestore(&card->ipm_lock, flags);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 10a3a3b4dd3..85cc53117ea 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -1107,7 +1107,7 @@ static int qeth_setup_card(struct qeth_card *card)
         INIT_LIST_HEAD(card->ip_tbd_list);
         INIT_LIST_HEAD(&card->cmd_waiter_list);
         init_waitqueue_head(&card->wait_q);
-        /* intial options */
+        /* initial options */
         qeth_set_intial_options(card);
         /* IP address takeover */
         INIT_LIST_HEAD(&card->ipato.entries);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index a0e05ef6592..8512b5c0ef8 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -1083,7 +1083,7 @@ static void zfcp_fsf_send_els_handler(struct zfcp_fsf_req *req)
                 }
                 break;
         case FSF_SBAL_MISMATCH:
-                /* should never occure, avoided in zfcp_fsf_send_els */
+                /* should never occur, avoided in zfcp_fsf_send_els */
                 /* fall through */
         default:
                 req->status |= ZFCP_STATUS_FSFREQ_ERROR;
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 8da5ed644c2..98e97d90835 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -391,7 +391,7 @@ int zfcp_qdio_open(struct zfcp_qdio *qdio)
         if (do_QDIO(cdev, QDIO_FLAG_SYNC_INPUT, 0, 0, QDIO_MAX_BUFFERS_PER_Q))
                 goto failed_qdio;
 
-        /* set index of first avalable SBALS / number of available SBALS */
+        /* set index of first available SBALS / number of available SBALS */
         qdio->req_q_idx = 0;
         atomic_set(&qdio->req_q_free, QDIO_MAX_BUFFERS_PER_Q);
         atomic_set_mask(ZFCP_STATUS_ADAPTER_QDIOUP, &qdio->adapter->status);
diff --git a/drivers/sbus/char/jsflash.c b/drivers/sbus/char/jsflash.c
index e8566224fe4..6b4678a7900 100644
--- a/drivers/sbus/char/jsflash.c
+++ b/drivers/sbus/char/jsflash.c
@@ -13,7 +13,7 @@
  * TODO: Erase/program both banks of a 8MB SIMM.
  *
  * It is anticipated that programming an OS Flash will be a routine
- * procedure. In the same time it is exeedingly dangerous because
+ * procedure. In the same time it is exceedingly dangerous because
  * a user can program its OBP flash with OS image and effectively
  * kill the machine.
  *
diff --git a/drivers/sbus/char/max1617.h b/drivers/sbus/char/max1617.h
index 0bb09c286cb..cd30819a0a3 100644
--- a/drivers/sbus/char/max1617.h
+++ b/drivers/sbus/char/max1617.h
@@ -6,7 +6,7 @@
 #define MAX1617_CPU_TEMP        0x01 /* Processor die temp in C */
 #define MAX1617_STATUS          0x02 /* Chip status bits        */
 
-/* Read-only versions of changable registers. */
+/* Read-only versions of changeable registers. */
 #define MAX1617_RD_CFG_BYTE     0x03 /* Config register         */
 #define MAX1617_RD_CVRATE_BYTE  0x04 /* Temp conversion rate    */
 #define MAX1617_RD_AMB_HIGHLIM  0x05 /* Ambient high limit      */
diff --git a/drivers/scsi/3w-9xxx.h b/drivers/scsi/3w-9xxx.h
index 3343824855d..040f7214e5b 100644
--- a/drivers/scsi/3w-9xxx.h
+++ b/drivers/scsi/3w-9xxx.h
@@ -61,7 +61,7 @@ static twa_message_type twa_aen_table[] = {
         {0x0000, "AEN queue empty"},
         {0x0001, "Controller reset occurred"},
         {0x0002, "Degraded unit detected"},
-        {0x0003, "Controller error occured"},
+        {0x0003, "Controller error occurred"},
         {0x0004, "Background rebuild failed"},
         {0x0005, "Background rebuild done"},
         {0x0006, "Incomplete unit detected"},
diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h
index 8b9f9d17e7f..49dcf03c631 100644
--- a/drivers/scsi/3w-xxxx.h
+++ b/drivers/scsi/3w-xxxx.h
@@ -8,7 +8,7 @@
 
    Copyright (C) 1999-2010 3ware Inc.
 
-   Kernel compatiblity By:      Andre Hedrick <andre@suse.com>
+   Kernel compatibility By:     Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000       Andre Hedrick <andre@suse.com>
 
    This program is free software; you can redistribute it and/or modify
diff --git a/drivers/scsi/53c700.scr b/drivers/scsi/53c700.scr
index a064a092c60..ec822e3b7a2 100644
--- a/drivers/scsi/53c700.scr
+++ b/drivers/scsi/53c700.scr
@@ -31,7 +31,7 @@ ABSOLUTE	StatusAddress = 0	; Addr to receive status return
 ABSOLUTE        ReceiveMsgAddress = 0   ; Addr to receive msg
 ;
 ; This is the magic component for handling scatter-gather.  Each of the
-; SG components is preceeded by a script fragment which moves the
+; SG components is preceded by a script fragment which moves the
 ; necessary amount of data and jumps to the next SG segment.  The final
 ; SG segment jumps back to .  However, this address is the first SG script
 ; segment.
diff --git a/drivers/scsi/53c700_d.h_shipped b/drivers/scsi/53c700_d.h_shipped
index 0b42a51257f..aa623da333c 100644
--- a/drivers/scsi/53c700_d.h_shipped
+++ b/drivers/scsi/53c700_d.h_shipped
@@ -34,7 +34,7 @@ ABSOLUTE	StatusAddress = 0	; Addr to receive status return
 ABSOLUTE        ReceiveMsgAddress = 0   ; Addr to receive msg
 ;
 ; This is the magic component for handling scatter-gather.  Each of the
-; SG components is preceeded by a script fragment which moves the
+; SG components is preceded by a script fragment which moves the
 ; necessary amount of data and jumps to the next SG segment.  The final
 ; SG segment jumps back to .  However, this address is the first SG script
 ; segment.
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index e40cdfb7541..dcd716d6860 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -2509,7 +2509,7 @@ static void FPT_ssel(unsigned long port, unsigned char p_card)
                                 WR_HARPOON(port + hp_autostart_3,
                                            (SELECT + SELCHK_STRT));
 
-                                /* Setup our STATE so we know what happend when
+                                /* Setup our STATE so we know what happened when
                                    the wheels fall off. */
                                 currSCCB->Sccb_scsistat = SELECT_ST;
 
@@ -2900,7 +2900,7 @@ static void FPT_SendMsg(unsigned long port, unsigned char message)
  *
  * Function: FPT_sdecm
  *
- * Description: Determine the proper responce to the message from the
+ * Description: Determine the proper response to the message from the
  *              target device.
  *
  *---------------------------------------------------------------------*/
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index e7cd2fcbe03..165e4dd865d 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -1198,12 +1198,12 @@ static irqreturn_t NCR5380_intr(int dummy, void *dev_id)
                                  */
 
                                 if ((NCR5380_read(MODE_REG) & MR_DMA) && ((basr & BASR_END_DMA_TRANSFER) || !(basr & BASR_PHASE_MATCH))) {
-                                        int transfered;
+                                        int transferred;
 
                                         if (!hostdata->connected)
                                                 panic("scsi%d : received end of DMA interrupt with no connected cmd\n", instance->hostno);
 
-                                        transfered = (hostdata->dmalen - NCR5380_dma_residual(instance));
+                                        transferred = (hostdata->dmalen - NCR5380_dma_residual(instance));
                                         hostdata->connected->SCp.this_residual -= transferred;
                                         hostdata->connected->SCp.ptr += transferred;
                                         hostdata->dmalen = 0;
@@ -1563,7 +1563,7 @@ failed:
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
@@ -1800,7 +1800,7 @@ static int do_abort(struct Scsi_Host *host) {
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index 118ce83a737..06199574144 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -747,8 +747,8 @@ char * get_container_type(unsigned tindex)
  * Arguments: [1] pointer to void [1] int
  *
  * Purpose: Sets SCSI inquiry data strings for vendor, product
- * and revision level. Allows strings to be set in platform dependant
- * files instead of in OS dependant driver source.
+ * and revision level. Allows strings to be set in platform dependent
+ * files instead of in OS dependent driver source.
  */
 
 static void setinqstr(struct aac_dev *dev, void *data, int tindex)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 29ab00016b7..ffb587817ef 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1259,7 +1259,7 @@ struct aac_dev
 #define CACHE_UNSTABLE          2
 
 /*
- *      Lets the client know at which level the data was commited on
+ *      Lets the client know at which level the data was committed on
  *      a write request
  */
 
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index dd7ad3ba2da..e7d0d47b918 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -421,7 +421,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size,
         if (!(hw_fib->header.XferState & cpu_to_le32(HostOwned)))
                 return -EBUSY;
         /*
-         *      There are 5 cases with the wait and reponse requested flags.
+         *      There are 5 cases with the wait and response requested flags.
          *      The only invalid cases are if the caller requests to wait and
          *      does not request a response and if the caller does not want a
          *      response and the Fib is not allocated from pool. If a response
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 081c6de92bc..bfd618a6949 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -4544,7 +4544,7 @@ AscMemWordCopyPtrToLram(PortAddr iop_base, ushort s_addr,
  * Copy 4 bytes to LRAM.
  *
  * The source data is assumed to be in little-endian order in memory
- * and is maintained in little-endian order when writen to LRAM.
+ * and is maintained in little-endian order when written to LRAM.
  */
 static void
 AscMemDWordCopyPtrToLram(PortAddr iop_base,
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index d058f1ab82b..1c10b796c1a 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -461,7 +461,7 @@ static int aha1740_queuecommand_lck(Scsi_Cmnd * SCpnt, void (*done)(Scsi_Cmnd *)
         /* The Adaptec Spec says the card is so fast that the loops
            will only be executed once in the code below. Even if this
            was true with the fastest processors when the spec was
-           written, it doesn't seem to be true with todays fast
+           written, it doesn't seem to be true with today's fast
            processors. We print a warning if the code is executed more
            often than LOOPCNT_WARN. If this happens, it should be
            investigated. If the count reaches LOOPCNT_MAX, we assume
diff --git a/drivers/scsi/aic7xxx/aic79xx.h b/drivers/scsi/aic7xxx/aic79xx.h
index 95ee5038518..9b059422aac 100644
--- a/drivers/scsi/aic7xxx/aic79xx.h
+++ b/drivers/scsi/aic7xxx/aic79xx.h
@@ -473,7 +473,7 @@ struct hardware_scb {
  *      o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *        or residual_sgptr does not have SG_LIST_NULL set.
  *
- *      o We are transfering the last segment if residual_datacnt has
+ *      o We are transferring the last segment if residual_datacnt has
  *        the SG_LAST_SEG flag set.
  *
  * Host:
@@ -516,7 +516,7 @@ struct hardware_scb {
  */
 
 /*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  * the length to store additional address bits and a flag to indicate
  * that a given segment terminates the transfer.  This gives us an
diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg
index 0666c22ab55..7e12c31ccfd 100644
--- a/drivers/scsi/aic7xxx/aic79xx.reg
+++ b/drivers/scsi/aic7xxx/aic79xx.reg
@@ -305,7 +305,7 @@ register HS_MAILBOX {
 }
 
 /*
- * Sequencer Interupt Status
+ * Sequencer Interrupt Status
  */
 register SEQINTSTAT {
         address                 0x00C
@@ -685,7 +685,7 @@ register DCHRXMSG0 {
 }
 
 /*
- * CMC Recieve Message 0
+ * CMC Receive Message 0
  */
 register CMCRXMSG0 {
         address                 0x090
@@ -696,7 +696,7 @@ register CMCRXMSG0 {
 }
 
 /*
- * Overlay Recieve Message 0
+ * Overlay Receive Message 0
  */
 register OVLYRXMSG0 {
         address                 0x090
@@ -732,7 +732,7 @@ register DCHRXMSG1 {
 }
 
 /*
- * CMC Recieve Message 1
+ * CMC Receive Message 1
  */
 register CMCRXMSG1 {
         address                 0x091
@@ -742,7 +742,7 @@ register CMCRXMSG1 {
 }
 
 /*
- * Overlay Recieve Message 1
+ * Overlay Receive Message 1
  */
 register OVLYRXMSG1 {
         address                 0x091
@@ -777,7 +777,7 @@ register DCHRXMSG2 {
 }
 
 /*
- * CMC Recieve Message 2
+ * CMC Receive Message 2
  */
 register CMCRXMSG2 {
         address                 0x092
@@ -787,7 +787,7 @@ register CMCRXMSG2 {
 }
 
 /*
- * Overlay Recieve Message 2
+ * Overlay Receive Message 2
  */
 register OVLYRXMSG2 {
         address                 0x092
@@ -816,7 +816,7 @@ register DCHRXMSG3 {
 }
 
 /*
- * CMC Recieve Message 3
+ * CMC Receive Message 3
  */
 register CMCRXMSG3 {
         address                 0x093
@@ -826,7 +826,7 @@ register CMCRXMSG3 {
 }
 
 /*
- * Overlay Recieve Message 3
+ * Overlay Receive Message 3
  */
 register OVLYRXMSG3 {
         address                 0x093
@@ -1249,7 +1249,7 @@ register TARGPCISTAT {
 
 /*
  * LQ Packet In
- * The last LQ Packet recieved
+ * The last LQ Packet received
  */
 register LQIN {
         address                 0x020
@@ -2573,7 +2573,7 @@ register IOPDNCTL {
 }
 
 /*
- * Shaddow Host Address.
+ * Shadow Host Address.
  */
 register SHADDR {
         address                 0x060
@@ -3983,7 +3983,7 @@ scratch_ram {
 
         /*
          * The maximum amount of time to wait, when interrupt coalescing
-         * is enabled, before issueing a CMDCMPLT interrupt for a completed
+         * is enabled, before issuing a CMDCMPLT interrupt for a completed
          * command.
          */
         INT_COALESCING_TIMER {
diff --git a/drivers/scsi/aic7xxx/aic79xx.seq b/drivers/scsi/aic7xxx/aic79xx.seq
index 2fb78e35a9e..3a36d9362a1 100644
--- a/drivers/scsi/aic7xxx/aic79xx.seq
+++ b/drivers/scsi/aic7xxx/aic79xx.seq
@@ -567,7 +567,7 @@ BEGIN_CRITICAL;
         shr     SELOID, 4, SCB_SCSIID;
         /*
          * If we want to send a message to the device, ensure
-         * we are selecting with atn irregardless of our packetized
+         * we are selecting with atn regardless of our packetized
          * agreement.  Since SPI4 only allows target reset or PPR
          * messages if this is a packetized connection, the change
          * to our negotiation table entry for this selection will
@@ -960,7 +960,7 @@ p_status_okay:
  * This is done to allow the host to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  *
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1507,7 +1507,7 @@ service_fifo:
                  * If the other FIFO needs loading, then it
                  * must not have claimed the S/G cache yet
                  * (SG_CACHE_AVAIL would have been cleared in
-                 * the orginal FIFO mode and we test this above).
+                 * the original FIFO mode and we test this above).
                  * Return to the idle loop so we can process the
                  * FIFO not currently on the bus first.
                  */
@@ -1521,7 +1521,7 @@ idle_sgfetch_okay:
 idle_sgfetch_start:
         /*
          * We fetch a "cacheline aligned" and sized amount of data
-         * so we don't end up referencing a non-existant page.
+         * so we don't end up referencing a non-existent page.
          * Cacheline aligned is in quotes because the kernel will
          * set the prefetch amount to a reasonable level if the
          * cacheline size is unknown.
@@ -1551,7 +1551,7 @@ idle_sg_avail:
         test    DFSTATUS, PRELOAD_AVAIL jz return;
         /*
          * On the A, preloading a segment before HDMAENACK
-         * comes true can clobber the shaddow address of the
+         * comes true can clobber the shadow address of the
          * first segment in the S/G FIFO.  Wait until it is
          * safe to proceed.
          */
@@ -2004,10 +2004,10 @@ pkt_handle_xfer:
          * Defer handling of this NONPACKREQ until we
          * can be sure it pertains to this FIFO.  SAVEPTRS
          * will not be asserted if the NONPACKREQ is for us,
-         * so we must simulate it if shaddow is valid.  If
-         * shaddow is not valid, keep running this FIFO until we
+         * so we must simulate it if shadow is valid.  If
+         * shadow is not valid, keep running this FIFO until we
          * have satisfied the transfer by loading segments and
-         * waiting for either shaddow valid or last_seg_done.
+         * waiting for either shadow valid or last_seg_done.
          */
         test    MDFFSTAT, SHVALID jnz pkt_saveptrs;
 pkt_service_fifo:
@@ -2171,7 +2171,7 @@ pkt_status_check_nonpackreq:
         /*
          * The unexpected nonpkt phase handler assumes that any
          * data channel use will have a FIFO reference count.  It
-         * turns out that the status handler doesn't need a refernce
+         * turns out that the status handler doesn't need a references
          * count since the status received flag, and thus completion
          * processing, cannot be set until the handler is finished.
          * We increment the count here to make the nonpkt handler
diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c
index 3233bf56443..5f8617dd43b 100644
--- a/drivers/scsi/aic7xxx/aic79xx_core.c
+++ b/drivers/scsi/aic7xxx/aic79xx_core.c
@@ -562,7 +562,7 @@ ahd_targetcmd_offset(struct ahd_softc *ahd, u_int index)
 }
 #endif
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 /*
  * Return pointers to the transfer negotiation information
  * for the specified our_id/remote_id pair.
@@ -599,7 +599,7 @@ void
 ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
 {
         /*
-         * Write low byte first to accomodate registers
+         * Write low byte first to accommodate registers
          * such as PRGMCNT where the order maters.
          */
         ahd_outb(ahd, port, value & 0xFF);
@@ -2067,7 +2067,7 @@ ahd_handle_seqint(struct ahd_softc *ahd, u_int intstat)
                  * that requires host assistance for completion.
                  * While handling the message phase(s), we will be
                  * notified by the sequencer after each byte is
-                 * transfered so we can track bus phase changes.
+                 * transferred so we can track bus phase changes.
                  *
                  * If this is the first time we've seen a HOST_MSG_LOOP
                  * interrupt, initialize the state of the host message
@@ -2487,7 +2487,7 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat)
                 /*
                  * Although the driver does not care about the
                  * 'Selection in Progress' status bit, the busy
-                 * LED does.  SELINGO is only cleared by a successfull
+                 * LED does.  SELINGO is only cleared by a successful
                  * selection, so we must manually clear it to insure
                  * the LED turns off just incase no future successful
                  * selections occur (e.g. no devices on the bus).
@@ -3548,7 +3548,7 @@ ahd_clear_critical_section(struct ahd_softc *ahd)
                 ahd_outb(ahd, SEQCTL0, ahd_inb(ahd, SEQCTL0) & ~STEP);
                 ahd_outb(ahd, SIMODE1, simode1);
                 /*
-                 * SCSIINT seems to glitch occassionally when
+                 * SCSIINT seems to glitch occasionally when
                  * the interrupt masks are restored.  Clear SCSIINT
                  * one more time so that only persistent errors
                  * are seen as a real interrupt.
@@ -3838,7 +3838,7 @@ ahd_validate_width(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo,
 
 /*
  * Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity.  This currently
+ * negotiate with at the next convenient opportunity.  This currently
  * means the next time we send the initial identify messages for
  * a new transaction.
  */
@@ -4200,7 +4200,7 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo,
 
         /*
          * During packetized transfers, the target will
-         * give us the oportunity to send command packets
+         * give us the opportunity to send command packets
          * without us asserting attention.
          */
         if ((tinfo->ppr_options & MSG_EXT_PPR_IU_REQ) == 0)
@@ -5651,7 +5651,7 @@ ahd_handle_msg_reject(struct ahd_softc *ahd, struct ahd_devinfo *devinfo)
 
                 /*
                  * Requeue all tagged commands for this target
-                 * currently in our posession so they can be
+                 * currently in our possession so they can be
                  * converted to untagged commands.
                  */
                 ahd_search_qinfifo(ahd, SCB_GET_TARGET(ahd, scb),
@@ -6245,7 +6245,7 @@ ahd_shutdown(void *arg)
 /*
  * Reset the controller and record some information about it
  * that is only available just after a reset.  If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
  * and the caller requests that the chip be fully reinitialized
  * to a runable state.  Chip interrupts are *not* enabled after
  * a reinitialization.  The caller must enable interrupts via
@@ -6495,7 +6495,7 @@ ahd_init_scbdata(struct ahd_softc *ahd)
         }
 
         /*
-         * Note that we were successfull
+         * Note that we were successful
          */
         return (0); 
 
@@ -7079,7 +7079,7 @@ ahd_init(struct ahd_softc *ahd)
                 return (ENOMEM);
 
         /*
-         * Verify that the compiler hasn't over-agressively
+         * Verify that the compiler hasn't over-aggressively
          * padded important structures.
          */
         if (sizeof(struct hardware_scb) != 64)
@@ -10087,7 +10087,7 @@ ahd_write_seeprom(struct ahd_softc *ahd, uint16_t *buf,
                 return (error);
 
         /*
-         * Write the data.  If we don't get throught the loop at
+         * Write the data.  If we don't get through the loop at
          * least once, the arguments were invalid.
          */
         retval = EINVAL;
diff --git a/drivers/scsi/aic7xxx/aic79xx_osm.c b/drivers/scsi/aic7xxx/aic79xx_osm.c
index 25d06662447..7d48700257a 100644
--- a/drivers/scsi/aic7xxx/aic79xx_osm.c
+++ b/drivers/scsi/aic7xxx/aic79xx_osm.c
@@ -1441,7 +1441,7 @@ ahd_platform_set_tags(struct ahd_softc *ahd, struct scsi_device *sdev,
                 usertags = ahd_linux_user_tagdepth(ahd, devinfo);
                 if (!was_queuing) {
                         /*
-                         * Start out agressively and allow our
+                         * Start out aggressively and allow our
                          * dynamic queue depth algorithm to take
                          * care of the rest.
                          */
diff --git a/drivers/scsi/aic7xxx/aic7xxx.h b/drivers/scsi/aic7xxx/aic7xxx.h
index 17444bc18bc..f695774645c 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.h
+++ b/drivers/scsi/aic7xxx/aic7xxx.h
@@ -440,7 +440,7 @@ struct hardware_scb {
  *      o A residual has occurred if SG_FULL_RESID is set in sgptr,
  *        or residual_sgptr does not have SG_LIST_NULL set.
  *
- *      o We are transfering the last segment if residual_datacnt has
+ *      o We are transferring the last segment if residual_datacnt has
  *        the SG_LAST_SEG flag set.
  *
  * Host:
@@ -494,7 +494,7 @@ struct hardware_scb {
  */
 
 /*
- * Definition of a scatter/gather element as transfered to the controller.
+ * Definition of a scatter/gather element as transferred to the controller.
  * The aic7xxx chips only support a 24bit length.  We use the top byte of
  * the length to store additional address bits and a flag to indicate
  * that a given segment terminates the transfer.  This gives us an
diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg
index 9a96e55da39..ba0b411d03e 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.reg
+++ b/drivers/scsi/aic7xxx/aic7xxx.reg
@@ -351,7 +351,7 @@ register SSTAT2 {
         address                 0x00d
         access_mode RO
         field   OVERRUN         0x80
-        field   SHVALID         0x40    /* Shaddow Layer non-zero */
+        field   SHVALID         0x40    /* Shadow Layer non-zero */
         field   EXP_ACTIVE      0x10    /* SCSI Expander Active */
         field   CRCVALERR       0x08    /* CRC doesn't match (U3 only) */
         field   CRCENDERR       0x04    /* No terminal CRC packet (U3 only) */
diff --git a/drivers/scsi/aic7xxx/aic7xxx.seq b/drivers/scsi/aic7xxx/aic7xxx.seq
index 5a4cfc954a9..e60041e8f2d 100644
--- a/drivers/scsi/aic7xxx/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx/aic7xxx.seq
@@ -57,10 +57,10 @@ PREFIX = "ahc_"
  * a later time.  This problem cannot be resolved by holding a single entry
  * in scratch ram since a reconnecting target can request sense and this will
  * create yet another SCB waiting for selection.  The solution used here is to 
- * use byte 27 of the SCB as a psuedo-next pointer and to thread a list
+ * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
  * of SCBs that are awaiting selection.  Since 0-0xfe are valid SCB indexes, 
  * SCB_LIST_NULL is 0xff which is out of range.  An entry is also added to
- * this list everytime a request sense occurs or after completing a non-tagged
+ * this list every time a request sense occurs or after completing a non-tagged
  * command for which a second SCB has been queued.  The sequencer will
  * automatically consume the entries.
  */
@@ -752,7 +752,7 @@ idle_loop:
 
         /*
          * We fetch a "cacheline aligned" and sized amount of data
-         * so we don't end up referencing a non-existant page.
+         * so we don't end up referencing a non-existent page.
          * Cacheline aligned is in quotes because the kernel will
          * set the prefetch amount to a reasonable level if the
          * cacheline size is unknown.
@@ -1485,7 +1485,7 @@ p_status_okay:
  * This is done to allow the host to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  *
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
@@ -1999,7 +1999,7 @@ if ((ahc->flags & AHC_TARGETROLE) != 0) {
  * from out to in, wait an additional data release delay before continuing.
  */
 change_phase:
-        /* Wait for preceeding I/O session to complete. */
+        /* Wait for preceding I/O session to complete. */
         test    SCSISIGI, ACKI jnz .;
 
         /* Change the phase */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c
index e021b4812d5..dc28b0a91b2 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_core.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_core.c
@@ -427,7 +427,7 @@ ahc_targetcmd_offset(struct ahc_softc *ahc, u_int index)
 }
 #endif
 
-/*********************** Miscelaneous Support Functions ***********************/
+/*********************** Miscellaneous Support Functions ***********************/
 /*
  * Determine whether the sequencer reported a residual
  * for this SCB/transaction.
@@ -1243,7 +1243,7 @@ ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
                  * that requires host assistance for completion.
                  * While handling the message phase(s), we will be
                  * notified by the sequencer after each byte is
-                 * transfered so we can track bus phase changes.
+                 * transferred so we can track bus phase changes.
                  *
                  * If this is the first time we've seen a HOST_MSG_LOOP
                  * interrupt, initialize the state of the host message
@@ -1487,7 +1487,7 @@ ahc_handle_seqint(struct ahc_softc *ahc, u_int intstat)
                        scbptr, ahc_inb(ahc, ARG_1),
                        ahc->scb_data->hscbs[scbptr].tag);
                 ahc_dump_card_state(ahc);
-                panic("for saftey");
+                panic("for safety");
                 break;
         }
         case OUT_OF_RANGE:
@@ -1733,7 +1733,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
                 /*
                  * Although the driver does not care about the
                  * 'Selection in Progress' status bit, the busy
-                 * LED does.  SELINGO is only cleared by a successfull
+                 * LED does.  SELINGO is only cleared by a successful
                  * selection, so we must manually clear it to insure
                  * the LED turns off just incase no future successful
                  * selections occur (e.g. no devices on the bus).
@@ -1943,7 +1943,7 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
                         if (lastphase != P_BUSFREE) {
                                 /*
                                  * Renegotiate with this device at the
-                                 * next oportunity just in case this busfree
+                                 * next opportunity just in case this busfree
                                  * is due to a negotiation mismatch with the
                                  * device.
                                  */
@@ -2442,7 +2442,7 @@ ahc_validate_width(struct ahc_softc *ahc, struct ahc_initiator_tinfo *tinfo,
 
 /*
  * Update the bitmask of targets for which the controller should
- * negotiate with at the next convenient oportunity.  This currently
+ * negotiate with at the next convenient opportunity.  This currently
  * means the next time we send the initial identify messages for
  * a new transaction.
  */
@@ -4131,7 +4131,7 @@ ahc_handle_msg_reject(struct ahc_softc *ahc, struct ahc_devinfo *devinfo)
 
                 /*
                  * Requeue all tagged commands for this target
-                 * currently in our posession so they can be
+                 * currently in our possession so they can be
                  * converted to untagged commands.
                  */
                 ahc_search_qinfifo(ahc, SCB_GET_TARGET(ahc, scb),
@@ -4581,7 +4581,7 @@ ahc_shutdown(void *arg)
 /*
  * Reset the controller and record some information about it
  * that is only available just after a reset.  If "reinit" is
- * non-zero, this reset occured after initial configuration
+ * non-zero, this reset occurred after initial configuration
  * and the caller requests that the chip be fully reinitialized
  * to a runable state.  Chip interrupts are *not* enabled after
  * a reinitialization.  The caller must enable interrupts via
@@ -4899,7 +4899,7 @@ ahc_init_scbdata(struct ahc_softc *ahc)
         ahc->next_queued_scb = ahc_get_scb(ahc);
 
         /*
-         * Note that we were successfull
+         * Note that we were successful
          */
         return (0); 
 
diff --git a/drivers/scsi/aic7xxx/aic7xxx_osm.c b/drivers/scsi/aic7xxx/aic7xxx_osm.c
index 4a359bb307c..c6251bb4f43 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_osm.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_osm.c
@@ -294,7 +294,7 @@ static uint32_t aic7xxx_extended;
  * dubious at best.  To my knowledge, this option has never actually
  * solved a PCI parity problem, but on certain machines with broken PCI
  * chipset configurations where stray PCI transactions with bad parity are
- * the norm rather than the exception, the error messages can be overwelming.
+ * the norm rather than the exception, the error messages can be overwhelming.
  * It's included in the driver for completeness.
  *   0     = Shut off PCI parity check
  *   non-0 = reverse polarity pci parity checking
@@ -1318,7 +1318,7 @@ ahc_platform_set_tags(struct ahc_softc *ahc, struct scsi_device *sdev,
                 usertags = ahc_linux_user_tagdepth(ahc, devinfo);
                 if (!was_queuing) {
                         /*
-                         * Start out agressively and allow our
+                         * Start out aggressively and allow our
                          * dynamic queue depth algorithm to take
                          * care of the rest.
                          */
diff --git a/drivers/scsi/aic7xxx/aic7xxx_pci.c b/drivers/scsi/aic7xxx/aic7xxx_pci.c
index 2b11a427236..6917b4f5ac9 100644
--- a/drivers/scsi/aic7xxx/aic7xxx_pci.c
+++ b/drivers/scsi/aic7xxx/aic7xxx_pci.c
@@ -789,7 +789,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
         ahc->bus_intr = ahc_pci_intr;
         ahc->bus_chip_init = ahc_pci_chip_init;
 
-        /* Remeber how the card was setup in case there is no SEEPROM */
+        /* Remember how the card was setup in case there is no SEEPROM */
         if ((ahc_inb(ahc, HCNTRL) & POWRDN) == 0) {
                 ahc_pause(ahc);
                 if ((ahc->features & AHC_ULTRA2) != 0)
@@ -860,7 +860,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
         }
 
         /*
-         * We cannot perform ULTRA speeds without the presense
+         * We cannot perform ULTRA speeds without the presence
          * of the external precision resistor.
          */
         if ((ahc->features & AHC_ULTRA) != 0) {
@@ -969,7 +969,7 @@ ahc_pci_config(struct ahc_softc *ahc, const struct ahc_pci_identity *entry)
 }
 
 /*
- * Test for the presense of external sram in an
+ * Test for the presence of external sram in an
  * "unshared" configuration.
  */
 static int
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
index e4064433842..f1586a43790 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y
@@ -803,7 +803,7 @@ macro_arglist:
 |       macro_arglist ',' T_ARG
         {
                 if ($1 == 0) {
-                        stop("Comma without preceeding argument in arg list",
+                        stop("Comma without preceding argument in arg list",
                              EX_DATAERR);
                         /* NOTREACHED */
                 }
@@ -1319,8 +1319,8 @@ code:
 ;
 
         /*
-         * This grammer differs from the one in the aic7xxx
-         * reference manual since the grammer listed there is
+         * This grammar differs from the one in the aic7xxx
+         * reference manual since the grammar listed there is
          * ambiguous and causes a shift/reduce conflict.
          * It also seems more logical as the "immediate"
          * argument is listed as the second arg like the
@@ -1799,7 +1799,7 @@ format_3_instr(int opcode, symbol_ref_t *src,
         instr = seq_alloc();
         f3_instr = &instr->format.format3;
         if (address->symbol == NULL) {
-                /* 'dot' referrence.  Use the current instruction pointer */
+                /* 'dot' reference.  Use the current instruction pointer */
                 addr = instruction_ptr + address->offset;
         } else if (address->symbol->type == UNINITIALIZED) {
                 /* forward reference */
diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
index ff46aa6801b..708326df076 100644
--- a/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
+++ b/drivers/scsi/aic7xxx/aicasm/aicasm_macro_gram.y
@@ -115,7 +115,7 @@ macro_arglist:
 |       macro_arglist ',' T_ARG
         {
                 if ($1 == 0) {
-                        stop("Comma without preceeding argument in arg list",
+                        stop("Comma without preceding argument in arg list",
                              EX_DATAERR);
                         /* NOTREACHED */
                 }
diff --git a/drivers/scsi/aic7xxx_old.c b/drivers/scsi/aic7xxx_old.c
index 4ff60a08df0..5b212f0df89 100644
--- a/drivers/scsi/aic7xxx_old.c
+++ b/drivers/scsi/aic7xxx_old.c
@@ -905,7 +905,7 @@ struct aic_dev_data {
  * problems with architectures I can't test on (because I don't have one,
  * such as the Alpha based systems) which happen to give faults for
  * non-aligned memory accesses, care was taken to align this structure
- * in a way that gauranteed all accesses larger than 8 bits were aligned
+ * in a way that guaranteed all accesses larger than 8 bits were aligned
  * on the appropriate boundary.  It's also organized to try and be more
  * cache line efficient.  Be careful when changing this lest you might hurt
  * overall performance and bring down the wrath of the masses.
@@ -1180,7 +1180,7 @@ static int aic7xxx_pci_parity = 0;
  * the card's registers in a hex dump format tailored to each model of
  * controller.
  * 
- * NOTE: THE CONTROLLER IS LEFT IN AN UNUSEABLE STATE BY THIS OPTION.
+ * NOTE: THE CONTROLLER IS LEFT IN AN UNUSABLE STATE BY THIS OPTION.
  *       YOU CANNOT BOOT UP WITH THIS OPTION, IT IS FOR DEBUGGING PURPOSES
  *       ONLY
  */
@@ -3467,7 +3467,7 @@ aic7xxx_reset_current_bus(struct aic7xxx_host *p)
   /* Turn off the bus' current operations, after all, we shouldn't have any
    * valid commands left to cause a RSELI and SELO once we've tossed the
    * bus away with this reset, so we might as well shut down the sequencer
-   * until the bus is restarted as oppossed to saving the current settings
+   * until the bus is restarted as opposed to saving the current settings
    * and restoring them (which makes no sense to me). */
 
   /* Turn on the bus reset. */
@@ -4070,7 +4070,7 @@ aic7xxx_handle_seqint(struct aic7xxx_host *p, unsigned char intstat)
             aic_dev->max_q_depth = aic_dev->temp_q_depth = 1;
             /*
              * We set this command up as a bus device reset.  However, we have
-             * to clear the tag type as it's causing us problems.  We shouldnt
+             * to clear the tag type as it's causing us problems.  We shouldn't
              * have to worry about any other commands being active, since if
              * the device is refusing tagged commands, this should be the
              * first tagged command sent to the device, however, we do have
@@ -9748,7 +9748,7 @@ skip_pci_controller:
     }
 
     /*
-     * We are commited now, everything has been checked and this card
+     * We are committed now, everything has been checked and this card
      * has been found, now we just set it up
      */
 
@@ -9906,7 +9906,7 @@ skip_pci_controller:
    *  2: All PCI controllers with BIOS_ENABLED next, according to BIOS
    *     address, going from lowest to highest.
    *  3: Remaining VLB/EISA controllers going in slot order.
-   *  4: Remaining PCI controllers, going in PCI device order (reversable)
+   *  4: Remaining PCI controllers, going in PCI device order (reversible)
    */
 
   {
diff --git a/drivers/scsi/aic7xxx_old/aic7xxx.seq b/drivers/scsi/aic7xxx_old/aic7xxx.seq
index 1565be9ebd4..823ff287322 100644
--- a/drivers/scsi/aic7xxx_old/aic7xxx.seq
+++ b/drivers/scsi/aic7xxx_old/aic7xxx.seq
@@ -51,7 +51,7 @@
  * use byte 27 of the SCB as a pseudo-next pointer and to thread a list
  * of SCBs that are awaiting selection.  Since 0-0xfe are valid SCB indexes, 
  * SCB_LIST_NULL is 0xff which is out of range.  An entry is also added to
- * this list everytime a request sense occurs or after completing a non-tagged
+ * this list every time a request sense occurs or after completing a non-tagged
  * command for which a second SCB has been queued.  The sequencer will
  * automatically consume the entries.
  */
@@ -696,7 +696,7 @@ p_status:
  * This is done to allow the hsot to send messages outside of an identify
  * sequence while protecting the seqencer from testing the MK_MESSAGE bit
  * on an SCB that might not be for the current nexus. (For example, a
- * BDR message in responce to a bad reselection would leave us pointed to
+ * BDR message in response to a bad reselection would leave us pointed to
  * an SCB that doesn't have anything to do with the current target).
  * Otherwise, treat MSG_OUT as a 1 byte message to send (abort, abort tag,
  * bus device reset).
@@ -716,8 +716,8 @@ p_mesgout_identify:
         } else {
                 and     SINDEX,0x7,SCB_TCL;     /* lun */
         }
-        and     A,DISCENB,SCB_CONTROL;  /* mask off disconnect privledge */
-        or      SINDEX,A;               /* or in disconnect privledge */
+        and     A,DISCENB,SCB_CONTROL;  /* mask off disconnect privilege */
+        or      SINDEX,A;               /* or in disconnect privilege */
         or      SINDEX,MSG_IDENTIFYFLAG;
 p_mesgout_mk_message:
         test    SCB_CONTROL,MK_MESSAGE  jz p_mesgout_tag;
diff --git a/drivers/scsi/aic94xx/aic94xx_reg_def.h b/drivers/scsi/aic94xx/aic94xx_reg_def.h
index 40273a747d2..dd6cc8008b1 100644
--- a/drivers/scsi/aic94xx/aic94xx_reg_def.h
+++ b/drivers/scsi/aic94xx/aic94xx_reg_def.h
@@ -2134,7 +2134,7 @@
 * The host accesses this scratch in a different manner from the
 * link sequencer. The sequencer has to use LSEQ registers
 * LmSCRPAGE and LmMnSCRPAGE to access the scratch memory. A flat
-* mapping of the scratch memory is avaliable for software
+* mapping of the scratch memory is available for software
 * convenience and to prevent corruption while the sequencer is
 * running. This memory is mapped onto addresses 800h - 9FFh.
 *
diff --git a/drivers/scsi/arm/acornscsi.c b/drivers/scsi/arm/acornscsi.c
index ec166726b31..c454e44cf51 100644
--- a/drivers/scsi/arm/acornscsi.c
+++ b/drivers/scsi/arm/acornscsi.c
@@ -100,7 +100,7 @@
  */
 #define TIMEOUT_TIME 10
 /*
- * Define this if you want to have verbose explaination of SCSI
+ * Define this if you want to have verbose explanation of SCSI
  * status/messages.
  */
 #undef CONFIG_ACORNSCSI_CONSTANTS
@@ -1561,7 +1561,7 @@ void acornscsi_message(AS_Host *host)
         /*
          * If we were negociating sync transfer, we don't yet know if
          * this REJECT is for the sync transfer or for the tagged queue/wide
-         * transfer.  Re-initiate sync transfer negociation now, and if
+         * transfer.  Re-initiate sync transfer negotiation now, and if
          * we got a REJECT in response to SDTR, then it'll be set to DONE.
          */
         if (host->device[host->SCpnt->device->id].sync_state == SYNC_SENT_REQUEST)
diff --git a/drivers/scsi/arm/acornscsi.h b/drivers/scsi/arm/acornscsi.h
index 8d2172a0b35..01bc715a3ae 100644
--- a/drivers/scsi/arm/acornscsi.h
+++ b/drivers/scsi/arm/acornscsi.h
@@ -223,8 +223,8 @@ typedef enum {
  * Synchronous transfer state
  */
 typedef enum {                                  /* Synchronous transfer state           */
-    SYNC_ASYNCHRONOUS,                          /* don't negociate synchronous transfers*/
-    SYNC_NEGOCIATE,                             /* start negociation                    */
+    SYNC_ASYNCHRONOUS,                          /* don't negotiate synchronous transfers*/
+    SYNC_NEGOCIATE,                             /* start negotiation                    */
     SYNC_SENT_REQUEST,                          /* sent SDTR message                    */
     SYNC_COMPLETED,                             /* received SDTR reply                  */
 } syncxfer_t;
@@ -322,7 +322,7 @@ typedef struct acornscsi_hostdata {
     /* per-device info */
     struct {
         unsigned char   sync_xfer;              /* synchronous transfer (SBIC value)    */
-        syncxfer_t      sync_state;             /* sync xfer negociation state          */
+        syncxfer_t      sync_state;             /* sync xfer negotiation state          */
         unsigned char   disconnect_ok:1;        /* device can disconnect                */
     } device[8];
     unsigned long       busyluns[64 / sizeof(unsigned long)];/* array of bits indicating LUNs busy      */
diff --git a/drivers/scsi/arm/arxescsi.c b/drivers/scsi/arm/arxescsi.c
index 2836fe248df..a750aa72b8e 100644
--- a/drivers/scsi/arm/arxescsi.c
+++ b/drivers/scsi/arm/arxescsi.c
@@ -228,7 +228,7 @@ static const char *arxescsi_info(struct Scsi_Host *host)
  * Params  : buffer - a buffer to write information to
  *           start  - a pointer into this buffer set by this routine to the start
  *                    of the required information.
- *           offset - offset into information that we have read upto.
+ *           offset - offset into information that we have read up to.
  *           length - length of buffer
  *           host_no - host number to return information for
  *           inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/cumana_2.c b/drivers/scsi/arm/cumana_2.c
index c9902b5c1f2..547987b8638 100644
--- a/drivers/scsi/arm/cumana_2.c
+++ b/drivers/scsi/arm/cumana_2.c
@@ -344,7 +344,7 @@ cumanascsi_2_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
  * Params   : buffer - a buffer to write information to
  *            start  - a pointer into this buffer set by this routine to the start
  *                     of the required information.
- *            offset - offset into information that we have read upto.
+ *            offset - offset into information that we have read up to.
  *            length - length of buffer
  *            host_no - host number to return information for
  *            inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/eesox.c b/drivers/scsi/arm/eesox.c
index d8435132f46..edfd12b48c2 100644
--- a/drivers/scsi/arm/eesox.c
+++ b/drivers/scsi/arm/eesox.c
@@ -429,7 +429,7 @@ eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
  * Params   : buffer - a buffer to write information to
  *            start  - a pointer into this buffer set by this routine to the start
  *                     of the required information.
- *            offset - offset into information that we have read upto.
+ *            offset - offset into information that we have read up to.
  *            length - length of buffer
  *            host_no - host number to return information for
  *            inout  - 0 for reading, 1 for writing.
diff --git a/drivers/scsi/arm/fas216.c b/drivers/scsi/arm/fas216.c
index 2b2ce21e227..e85c40b6e19 100644
--- a/drivers/scsi/arm/fas216.c
+++ b/drivers/scsi/arm/fas216.c
@@ -2119,7 +2119,7 @@ request_sense:
          * executed, unless a target connects to us.
          */
         if (info->reqSCpnt)
-                printk(KERN_WARNING "scsi%d.%c: loosing request command\n",
+                printk(KERN_WARNING "scsi%d.%c: losing request command\n",
                         info->host->host_no, '0' + SCpnt->device->id);
         info->reqSCpnt = SCpnt;
 }
@@ -2294,7 +2294,7 @@ static int fas216_noqueue_command_lck(struct scsi_cmnd *SCpnt,
                  * If we don't have an IRQ, then we must poll the card for
                  * it's interrupt, and use that to call this driver's
                  * interrupt routine.  That way, we keep the command
-                 * progressing.  Maybe we can add some inteligence here
+                 * progressing.  Maybe we can add some intelligence here
                  * and go to sleep if we know that the device is going
                  * to be some time (eg, disconnected).
                  */
diff --git a/drivers/scsi/arm/fas216.h b/drivers/scsi/arm/fas216.h
index f30f8d659dc..84b7127c012 100644
--- a/drivers/scsi/arm/fas216.h
+++ b/drivers/scsi/arm/fas216.h
@@ -203,11 +203,11 @@ typedef enum {
 } fasdmatype_t;
 
 typedef enum {
-        neg_wait,                                       /* Negociate with device                */
-        neg_inprogress,                                 /* Negociation sent                     */
-        neg_complete,                                   /* Negociation complete                 */
-        neg_targcomplete,                               /* Target completed negociation         */
-        neg_invalid                                     /* Negociation not supported            */
+        neg_wait,                                       /* Negotiate with device                */
+        neg_inprogress,                                 /* Negotiation sent                     */
+        neg_complete,                                   /* Negotiation complete                 */
+        neg_targcomplete,                               /* Target completed negotiation         */
+        neg_invalid                                     /* Negotiation not supported            */
 } neg_t;
 
 #define MAGIC   0x441296bdUL
diff --git a/drivers/scsi/arm/powertec.c b/drivers/scsi/arm/powertec.c
index e2297b4c1b9..9274c0677b9 100644
--- a/drivers/scsi/arm/powertec.c
+++ b/drivers/scsi/arm/powertec.c
@@ -232,7 +232,7 @@ powertecscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
  * Params   : buffer  - a buffer to write information to
  *            start   - a pointer into this buffer set by this routine to the start
  *                      of the required information.
- *            offset  - offset into information that we have read upto.
+ *            offset  - offset into information that we have read up to.
  *            length  - length of buffer
  *            inout   - 0 for reading, 1 for writing.
  * Returns  : length of data written to buffer.
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index 88b2928b4d3..ea439f93ed8 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -464,7 +464,7 @@ static void free_all_tags(void)
  *
  * Parameters: Scsi_Cmnd *cmd
  *    The command to work on. The first scatter buffer's data are
- *    assumed to be already transfered into ptr/this_residual.
+ *    assumed to be already transferred into ptr/this_residual.
  */
 
 static void merge_contiguous_buffers(Scsi_Cmnd *cmd)
@@ -1720,7 +1720,7 @@ static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
  *      bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes are transfered or exit
+ *      maximum number of bytes, 0 if all bytes are transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
@@ -1911,7 +1911,7 @@ static int do_abort(struct Scsi_Host *host)
  *      bytes to transfer, **data - pointer to data pointer.
  *
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index 76029d570be..7e6eca4a125 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -1228,7 +1228,7 @@ TCM_5:			/* isolation complete..  */
         printk(" \n%x %x %x %s\n ",assignid_map,mbuf[0],mbuf[1],&mbuf[2]); */
         i = 15;
         j = mbuf[0];
-        if ((j & 0x20) != 0) {  /* bit5=1:ID upto 7      */
+        if ((j & 0x20) != 0) {  /* bit5=1:ID up to 7      */
                 i = 7;
         }
         if ((j & 0x06) == 0) {  /* IDvalid?             */
diff --git a/drivers/scsi/be2iscsi/be_cmds.h b/drivers/scsi/be2iscsi/be_cmds.h
index 5218de4ab35..fbd1dc2c15f 100644
--- a/drivers/scsi/be2iscsi/be_cmds.h
+++ b/drivers/scsi/be2iscsi/be_cmds.h
@@ -877,7 +877,7 @@ struct be_all_if_id {
                                                  */
 #define CXN_KILLED_PDU_SIZE_EXCEEDS_DSL 3       /* Connection got invalidated
                                                  * internally
-                                                 * due to a recieved PDU
+                                                 * due to a received PDU
                                                  * size > DSL
                                                  */
 #define CXN_KILLED_BURST_LEN_MISMATCH   4       /* Connection got invalidated
@@ -886,7 +886,7 @@ struct be_all_if_id {
                                                  * FBL/MBL.
                                                  */
 #define CXN_KILLED_AHS_RCVD             5       /* Connection got invalidated
-                                                 * internally due to a recieved
+                                                 * internally due to a received
                                                  * PDU Hdr that has
                                                  * AHS */
 #define CXN_KILLED_HDR_DIGEST_ERR       6       /* Connection got invalidated
@@ -899,12 +899,12 @@ struct be_all_if_id {
                                                  * pdu hdr
                                                  */
 #define CXN_KILLED_STALE_ITT_TTT_RCVD   8       /* Connection got invalidated
-                                                 * internally due to a recieved
+                                                 * internally due to a received
                                                  * ITT/TTT that does not belong
                                                  * to this Connection
                                                  */
 #define CXN_KILLED_INVALID_ITT_TTT_RCVD 9       /* Connection got invalidated
-                                                 * internally due to recieved
+                                                 * internally due to received
                                                  * ITT/TTT value > Max
                                                  * Supported ITTs/TTTs
                                                  */
@@ -936,21 +936,21 @@ struct be_all_if_id {
                                                  * index.
                                                  */
 #define CXN_KILLED_OVER_RUN_RESIDUAL    16      /* Command got invalidated
-                                                 * internally due to recived
+                                                 * internally due to received
                                                  * command has residual
                                                  * over run bytes.
                                                  */
 #define CXN_KILLED_UNDER_RUN_RESIDUAL   17      /* Command got invalidated
-                                                 * internally due to recived
+                                                 * internally due to received
                                                  * command has residual under
                                                  * run bytes.
                                                  */
 #define CMD_KILLED_INVALID_STATSN_RCVD  18      /* Command got invalidated
-                                                 * internally due to a recieved
+                                                 * internally due to a received
                                                  * PDU has an invalid StatusSN
                                                  */
 #define CMD_KILLED_INVALID_R2T_RCVD     19      /* Command got invalidated
-                                                 * internally due to a recieved
+                                                 * internally due to a received
                                                  * an R2T with some invalid
                                                  * fields in it
                                                  */
@@ -973,7 +973,7 @@ struct be_all_if_id {
                                                  */
 #define CMD_CXN_KILLED_INVALID_DATASN_RCVD 24   /* Command got invalidated
                                                  * internally due to a
-                                                 * recieved PDU has an invalid
+                                                 * received PDU has an invalid
                                                  * DataSN
                                                  */
 #define CXN_INVALIDATE_NOTIFY           25      /* Connection invalidation
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c
index 1cd5c8b0618..91838c51fb7 100644
--- a/drivers/scsi/bfa/bfa_core.c
+++ b/drivers/scsi/bfa/bfa_core.c
@@ -355,7 +355,7 @@ bfa_msix_lpu_err(struct bfa_s *bfa, int vec)
                         /*
                          * ERR_PSS bit needs to be cleared as well in case
                          * interrups are shared so driver's interrupt handler is
-                         * still called eventhough it is already masked out.
+                         * still called even though it is already masked out.
                          */
                         curr_value = readl(
                                         bfa->ioc.ioc_regs.pss_err_status_reg);
diff --git a/drivers/scsi/bfa/bfa_defs_svc.h b/drivers/scsi/bfa/bfa_defs_svc.h
index 648c8417672..207f598877c 100644
--- a/drivers/scsi/bfa/bfa_defs_svc.h
+++ b/drivers/scsi/bfa/bfa_defs_svc.h
@@ -145,7 +145,7 @@ struct bfa_fw_io_stats_s {
         u32     ioh_data_oor_event;     /*  Data out of range */
         u32     ioh_ro_ooo_event;       /*  Relative offset out of range */
         u32     ioh_cpu_owned_event;    /*  IOH hit -iost owned by f/w */
-        u32     ioh_unexp_frame_event;  /*  unexpected frame recieved
+        u32     ioh_unexp_frame_event;  /*  unexpected frame received
                                                  *   count */
         u32     ioh_err_int;            /*  IOH error int during data-phase
                                                  *   for scsi write
@@ -566,8 +566,8 @@ struct bfa_itnim_iostats_s {
         u32     input_reqs;             /*  Data in-bound requests      */
         u32     output_reqs;            /*  Data out-bound requests     */
         u32     io_comps;               /*  Total IO Completions        */
-        u32     wr_throughput;          /*  Write data transfered in bytes */
-        u32     rd_throughput;          /*  Read data transfered in bytes  */
+        u32     wr_throughput;          /*  Write data transferred in bytes */
+        u32     rd_throughput;          /*  Read data transferred in bytes  */
 
         u32     iocomp_ok;              /*  Slowpath IO completions     */
         u32     iocomp_underrun;        /*  IO underrun         */
diff --git a/drivers/scsi/bfa/bfa_fc.h b/drivers/scsi/bfa/bfa_fc.h
index 8e764fae8dc..bf0067e0fd0 100644
--- a/drivers/scsi/bfa/bfa_fc.h
+++ b/drivers/scsi/bfa/bfa_fc.h
@@ -315,7 +315,7 @@ struct fc_plogi_csp_s {
                         query_dbc:1,
                         hg_supp:1;
 #endif
-        __be16          rxsz;           /* recieve data_field size */
+        __be16          rxsz;           /* receive data_field size */
         __be16          conseq;
         __be16          ro_bitmap;
         __be32          e_d_tov;
diff --git a/drivers/scsi/bfa/bfa_fcs.c b/drivers/scsi/bfa/bfa_fcs.c
index f674f931862..9b43ca4b677 100644
--- a/drivers/scsi/bfa/bfa_fcs.c
+++ b/drivers/scsi/bfa/bfa_fcs.c
@@ -1033,7 +1033,7 @@ bfa_fcs_fabric_delvport(struct bfa_fcs_fabric_s *fabric,
 
 
 /*
- * Lookup for a vport withing a fabric given its pwwn
+ * Lookup for a vport within a fabric given its pwwn
  */
 struct bfa_fcs_vport_s *
 bfa_fcs_fabric_vport_lookup(struct bfa_fcs_fabric_s *fabric, wwn_t pwwn)
diff --git a/drivers/scsi/bfa/bfa_fcs.h b/drivers/scsi/bfa/bfa_fcs.h
index 0fd63168573..61cdce4bd91 100644
--- a/drivers/scsi/bfa/bfa_fcs.h
+++ b/drivers/scsi/bfa/bfa_fcs.h
@@ -705,7 +705,7 @@ enum rport_event {
         RPSM_EVENT_ADDRESS_CHANGE = 15, /*  Rport's PID has changed     */
         RPSM_EVENT_ADDRESS_DISC = 16,   /*  Need to Discover rport's PID */
         RPSM_EVENT_PRLO_RCVD   = 17,    /*  PRLO from remote device     */
-        RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continously */
+        RPSM_EVENT_PLOGI_RETRY = 18,    /*  Retry PLOGI continuously */
 };
 
 /*
diff --git a/drivers/scsi/bfa/bfa_fcs_lport.c b/drivers/scsi/bfa/bfa_fcs_lport.c
index 43fa986bb58..1d6be8c1447 100644
--- a/drivers/scsi/bfa/bfa_fcs_lport.c
+++ b/drivers/scsi/bfa/bfa_fcs_lport.c
@@ -1149,7 +1149,7 @@ bfa_fcs_lport_fdmi_sm_offline(struct bfa_fcs_lport_fdmi_s *fdmi,
                 } else {
                         /*
                          * For a base port, we should first register the HBA
-                         * atribute. The HBA attribute also contains the base
+                         * attribute. The HBA attribute also contains the base
                          *  port registration.
                          */
                         bfa_sm_set_state(fdmi,
diff --git a/drivers/scsi/bfa/bfa_svc.c b/drivers/scsi/bfa/bfa_svc.c
index 1d34921f88b..16d9a5f61c1 100644
--- a/drivers/scsi/bfa/bfa_svc.c
+++ b/drivers/scsi/bfa/bfa_svc.c
@@ -1035,7 +1035,7 @@ bfa_fcxp_free(struct bfa_fcxp_s *fcxp)
  * @param[in]   rport   BFA rport pointer. Could be left NULL for WKA rports
  * @param[in]   vf_id   virtual Fabric ID
  * @param[in]   lp_tag  lport tag
- * @param[in]   cts     use Continous sequence
+ * @param[in]   cts     use Continuous sequence
  * @param[in]   cos     fc Class of Service
  * @param[in]   reqlen  request length, does not include FCHS length
  * @param[in]   fchs    fc Header Pointer. The header content will be copied
@@ -5022,7 +5022,7 @@ bfa_uf_start(struct bfa_s *bfa)
 }
 
 /*
- * Register handler for all unsolicted recieve frames.
+ * Register handler for all unsolicted receive frames.
  *
  * @param[in]   bfa             BFA instance
  * @param[in]   ufrecv  receive handler function
diff --git a/drivers/scsi/bfa/bfa_svc.h b/drivers/scsi/bfa/bfa_svc.h
index 331ad992a58..5902a45c080 100644
--- a/drivers/scsi/bfa/bfa_svc.h
+++ b/drivers/scsi/bfa/bfa_svc.h
@@ -127,7 +127,7 @@ struct bfa_fcxp_req_info_s {
                                          * rport nexus is established
                                          */
         struct fchs_s   fchs;   /*  request FC header structure */
-        u8              cts;    /*  continous sequence */
+        u8              cts;    /*  continuous sequence */
         u8              class;  /*  FC class for the request/response */
         u16     max_frmsz;      /*  max send frame size */
         u16     vf_id;  /*  vsan tag if applicable */
diff --git a/drivers/scsi/bfa/bfad.c b/drivers/scsi/bfa/bfad.c
index 44524cf55d3..0fd510a0156 100644
--- a/drivers/scsi/bfa/bfad.c
+++ b/drivers/scsi/bfa/bfad.c
@@ -1278,7 +1278,7 @@ bfad_setup_intr(struct bfad_s *bfad)
                          * interrupts into one vector, so even if we
                          * can try to request less vectors, we don't
                          * know how to associate interrupt events to
-                         *  vectors. Linux doesn't dupicate vectors
+                         *  vectors. Linux doesn't duplicate vectors
                          * in the MSIX table for this case.
                          */
 
diff --git a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
index 69d031d9846..97a61b4d81b 100644
--- a/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
+++ b/drivers/scsi/bnx2fc/57xx_hsi_bnx2fc.h
@@ -898,7 +898,7 @@ struct fcoe_confqe {
 
 
 /*
- * FCoE conection data base
+ * FCoE connection data base
  */
 struct fcoe_conn_db {
 #if defined(__BIG_ENDIAN)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_els.c b/drivers/scsi/bnx2fc/bnx2fc_els.c
index 7a11a255157..52c358427ce 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_els.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_els.c
@@ -397,7 +397,7 @@ void bnx2fc_process_els_compl(struct bnx2fc_cmd *els_req,
                              &els_req->req_flags)) {
                 BNX2FC_ELS_DBG("Timer context finished processing this "
                            "els - 0x%x\n", els_req->xid);
-                /* This IO doesnt receive cleanup completion */
+                /* This IO doesn't receive cleanup completion */
                 kref_put(&els_req->refcount, bnx2fc_cmd_release);
                 return;
         }
diff --git a/drivers/scsi/bnx2fc/bnx2fc_io.c b/drivers/scsi/bnx2fc/bnx2fc_io.c
index d3fc302c241..1decefbf32e 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_io.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_io.c
@@ -1273,7 +1273,7 @@ static void bnx2fc_lun_reset_cmpl(struct bnx2fc_cmd *io_req)
                                                  bnx2fc_cmd_release);
                                                         /* timer hold */
                                 rc = bnx2fc_initiate_abts(cmd);
-                                /* abts shouldnt fail in this context */
+                                /* abts shouldn't fail in this context */
                                 WARN_ON(rc != SUCCESS);
                         } else
                                 printk(KERN_ERR PFX "lun_rst: abts already in"
@@ -1308,7 +1308,7 @@ static void bnx2fc_tgt_reset_cmpl(struct bnx2fc_cmd *io_req)
                                 kref_put(&io_req->refcount,
                                          bnx2fc_cmd_release); /* timer hold */
                         rc = bnx2fc_initiate_abts(cmd);
-                        /* abts shouldnt fail in this context */
+                        /* abts shouldn't fail in this context */
                         WARN_ON(rc != SUCCESS);
 
                 } else
diff --git a/drivers/scsi/bnx2fc/bnx2fc_tgt.c b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
index 7cc05e4e82d..a2e3830bd26 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_tgt.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_tgt.c
@@ -395,7 +395,7 @@ void bnx2fc_rport_event_handler(struct fc_lport *lport,
                 rp = rport->dd_data;
                 if (rport->port_id == FC_FID_DIR_SERV) {
                         /*
-                         * bnx2fc_rport structure doesnt exist for
+                         * bnx2fc_rport structure doesn't exist for
                          * directory server.
                          * We should not come here, as lport will
                          * take care of fabric login
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 1da34c019b8..f0b89513fae 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -173,7 +173,7 @@ void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action)
 
 /**
  * bnx2i_get_rq_buf - copy RQ buffer contents to driver buffer
- * @conn:               iscsi connection on which RQ event occured
+ * @conn:               iscsi connection on which RQ event occurred
  * @ptr:                driver buffer to which RQ buffer contents is to
  *                      be copied
  * @len:                length of valid data inside RQ buf
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index 0a20fd5f710..9267844519c 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -262,9 +262,9 @@ struct cxgbi_skb_tx_cb {
 enum cxgbi_skcb_flags {
         SKCBF_TX_NEED_HDR,      /* packet needs a header */
         SKCBF_RX_COALESCED,     /* received whole pdu */
-        SKCBF_RX_HDR,           /* recieved pdu header */
-        SKCBF_RX_DATA,          /* recieved pdu payload */
-        SKCBF_RX_STATUS,        /* recieved ddp status */
+        SKCBF_RX_HDR,           /* received pdu header */
+        SKCBF_RX_DATA,          /* received pdu payload */
+        SKCBF_RX_STATUS,        /* received ddp status */
         SKCBF_RX_DATA_DDPD,     /* pdu payload ddp'd */
         SKCBF_RX_HCRC_ERR,      /* header digest error */
         SKCBF_RX_DCRC_ERR,      /* data digest error */
diff --git a/drivers/scsi/dc395x.c b/drivers/scsi/dc395x.c
index b0f8523e665..b10b3841535 100644
--- a/drivers/scsi/dc395x.c
+++ b/drivers/scsi/dc395x.c
@@ -235,7 +235,7 @@ struct ScsiReqBlk {
 
         u8 sg_count;                    /* No of HW sg entries for this request */
         u8 sg_index;                    /* Index of HW sg entry for this request */
-        size_t total_xfer_length;       /* Total number of bytes remaining to be transfered */
+        size_t total_xfer_length;       /* Total number of bytes remaining to be transferred */
         size_t request_length;          /* Total number of bytes in this request */
         /*
          * The sense buffer handling function, request_sense, uses
@@ -1774,7 +1774,7 @@ static void dc395x_handle_interrupt(struct AdapterCtlBlk *acb,
                 dc395x_statev(acb, srb, &scsi_status);
 
                 /* 
-                 * if there were any exception occured scsi_status
+                 * if there were any exception occurred scsi_status
                  * will be modify to bus free phase new scsi_status
                  * transfer out from ... previous dc395x_statev
                  */
@@ -1954,11 +1954,11 @@ static void sg_verify_length(struct ScsiReqBlk *srb)
 static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 {
         u8 idx;
-        u32 xferred = srb->total_xfer_length - left; /* bytes transfered */
+        u32 xferred = srb->total_xfer_length - left; /* bytes transferred */
         struct SGentry *psge = srb->segment_x + srb->sg_index;
 
         dprintkdbg(DBG_0,
-                "sg_update_list: Transfered %i of %i bytes, %i remain\n",
+                "sg_update_list: Transferred %i of %i bytes, %i remain\n",
                 xferred, srb->total_xfer_length, left);
         if (xferred == 0) {
                 /* nothing to update since we did not transfer any data */
@@ -1990,7 +1990,7 @@ static void sg_update_list(struct ScsiReqBlk *srb, u32 left)
 
 
 /*
- * We have transfered a single byte (PIO mode?) and need to update
+ * We have transferred a single byte (PIO mode?) and need to update
  * the count of bytes remaining (total_xfer_length) and update the sg
  * entry to either point to next byte in the current sg entry, or of
  * already at the end to point to the start of the next sg entry
@@ -2029,7 +2029,7 @@ static void cleanup_after_transfer(struct AdapterCtlBlk *acb,
 
 
 /*
- * Those no of bytes will be transfered w/ PIO through the SCSI FIFO
+ * Those no of bytes will be transferred w/ PIO through the SCSI FIFO
  * Seems to be needed for unknown reasons; could be a hardware bug :-(
  */
 #define DC395x_LASTPIO 4
@@ -2256,7 +2256,7 @@ static void data_in_phase0(struct AdapterCtlBlk *acb, struct ScsiReqBlk *srb,
                         DC395x_read32(acb, TRM_S1040_DMA_CXCNT),
                         srb->total_xfer_length, d_left_counter);
 #if DC395x_LASTPIO
-                /* KG: Less than or equal to 4 bytes can not be transfered via DMA, it seems. */
+                /* KG: Less than or equal to 4 bytes can not be transferred via DMA, it seems. */
                 if (d_left_counter
                     && srb->total_xfer_length <= DC395x_LASTPIO) {
                         size_t left_io = srb->total_xfer_length;
diff --git a/drivers/scsi/dc395x.h b/drivers/scsi/dc395x.h
index b38360e5fe4..fbf35e37701 100644
--- a/drivers/scsi/dc395x.h
+++ b/drivers/scsi/dc395x.h
@@ -617,7 +617,7 @@ struct ScsiInqData
 #define NTC_DO_SEND_START               0x08    /* Send start command SPINUP            */
 #define NTC_DO_DISCONNECT               0x04    /* Enable SCSI disconnect               */
 #define NTC_DO_SYNC_NEGO                0x02    /* Sync negotiation                     */
-#define NTC_DO_PARITY_CHK               0x01    /* (it sould define at NAC)             */
+#define NTC_DO_PARITY_CHK               0x01    /* (it should define at NAC)            */
                                                 /* Parity check enable                  */
 
 /************************************************************************/
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 7cae0bc8539..42fe52902ad 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -541,7 +541,7 @@ static int alua_check_sense(struct scsi_device *sdev,
  *
  * Evaluate the Target Port Group State.
  * Returns SCSI_DH_DEV_OFFLINED if the path is
- * found to be unuseable.
+ * found to be unusable.
  */
 static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
 {
@@ -620,7 +620,7 @@ static int alua_rtpg(struct scsi_device *sdev, struct alua_dh_data *h)
                 break;
         case TPGS_STATE_OFFLINE:
         case TPGS_STATE_UNAVAILABLE:
-                /* Path unuseable for unavailable/offline */
+                /* Path unusable for unavailable/offline */
                 err = SCSI_DH_DEV_OFFLINED;
                 break;
         default:
diff --git a/drivers/scsi/dpt/sys_info.h b/drivers/scsi/dpt/sys_info.h
index a90c4cb8ea8..a4aa1c31ff7 100644
--- a/drivers/scsi/dpt/sys_info.h
+++ b/drivers/scsi/dpt/sys_info.h
@@ -79,9 +79,9 @@
    typedef struct  {
 #endif
 
-   uSHORT       cylinders;      /* Upto 1024 */
-   uCHAR        heads;          /* Upto 255 */
-   uCHAR        sectors;        /* Upto 63 */
+   uSHORT       cylinders;      /* Up to 1024 */
+   uCHAR        heads;          /* Up to 255 */
+   uCHAR        sectors;        /* Up to 63 */
 
 #ifdef  __cplusplus
 
diff --git a/drivers/scsi/eata.c b/drivers/scsi/eata.c
index 53925ac178f..0eb4fe6a4c8 100644
--- a/drivers/scsi/eata.c
+++ b/drivers/scsi/eata.c
@@ -63,7 +63,7 @@
  *          ep:[y|n]      eisa_probe=[1|0]  CONFIG_EISA defined
  *          pp:[y|n]      pci_probe=[1|0]   CONFIG_PCI  defined
  *
- *          The default action is to perform probing if the corrisponding
+ *          The default action is to perform probing if the corresponding
  *          bus is configured and to skip probing otherwise.
  *
  *        + If pci_probe is in effect and a list of I/O  ports is specified
diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index c93f007e702..9d38be2a41f 100644
--- a/drivers/scsi/fcoe/fcoe_ctlr.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -656,7 +656,7 @@ int fcoe_ctlr_els_send(struct fcoe_ctlr *fip, struct fc_lport *lport,
                  * If non-FIP, we may have gotten an SID by accepting an FLOGI
                  * from a point-to-point connection.  Switch to using
                  * the source mac based on the SID.  The destination
-                 * MAC in this case would have been set by receving the
+                 * MAC in this case would have been set by receiving the
                  * FLOGI.
                  */
                 if (fip->state == FIP_ST_NON_FIP) {
@@ -1876,7 +1876,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip,
  * fcoe_ctlr_vn_rport_callback - Event handler for rport events.
  * @lport: The lport which is receiving the event
  * @rdata: remote port private data
- * @event: The event that occured
+ * @event: The event that occurred
  *
  * Locking Note:  The rport lock must not be held when calling this function.
  */
diff --git a/drivers/scsi/fdomain.c b/drivers/scsi/fdomain.c
index 69b7aa54f43..643f6d500fe 100644
--- a/drivers/scsi/fdomain.c
+++ b/drivers/scsi/fdomain.c
@@ -174,7 +174,7 @@
  Future Domain sold DOS BIOS source for $250 and the UN*X driver source was
  $750, but these required a non-disclosure agreement, so even if I could
  have afforded them, they would *not* have been useful for writing this
- publically distributable driver.  Future Domain technical support has
+ publicly distributable driver.  Future Domain technical support has
  provided some information on the phone and have sent a few useful FAXs.
  They have been much more helpful since they started to recognize that the
  word "Linux" refers to an operating system :-).
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index 2b48d79bad9..3c53c3478ee 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -411,7 +411,7 @@ int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do)
                         err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
                         if (err)
                                 shost_printk(KERN_ERR, fnic->lport->host,
-                                             "fnic_alloc_rq_frame cant alloc"
+                                             "fnic_alloc_rq_frame can't alloc"
                                              " frame\n");
                 }
                 tot_rq_work_done += cur_work_done;
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
index 22d02404d15..538b31c2cf5 100644
--- a/drivers/scsi/fnic/fnic_scsi.c
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -1123,7 +1123,7 @@ void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
                                             fc_lun.scsi_lun, io_req)) {
                         /*
                          * Revert the cmd state back to old state, if
-                         * it hasnt changed in between. This cmd will get
+                         * it hasn't changed in between. This cmd will get
                          * aborted later by scsi_eh, or cleaned up during
                          * lun reset
                          */
@@ -1208,7 +1208,7 @@ void fnic_terminate_rport_io(struct fc_rport *rport)
                                             fc_lun.scsi_lun, io_req)) {
                         /*
                          * Revert the cmd state back to old state, if
-                         * it hasnt changed in between. This cmd will get
+                         * it hasn't changed in between. This cmd will get
                          * aborted later by scsi_eh, or cleaned up during
                          * lun reset
                          */
diff --git a/drivers/scsi/g_NCR5380.c b/drivers/scsi/g_NCR5380.c
index 427a56d3117..81182badfeb 100644
--- a/drivers/scsi/g_NCR5380.c
+++ b/drivers/scsi/g_NCR5380.c
@@ -566,7 +566,7 @@ generic_NCR5380_biosparam(struct scsi_device *sdev, struct block_device *bdev,
  *      @dst: buffer to read into
  *      @len: buffer length
  *
- *      Perform a psuedo DMA mode read from an NCR53C400 or equivalent
+ *      Perform a pseudo DMA mode read from an NCR53C400 or equivalent
  *      controller
  */
  
@@ -650,7 +650,7 @@ static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst,
  *      @dst: buffer to read into
  *      @len: buffer length
  *
- *      Perform a psuedo DMA mode read from an NCR53C400 or equivalent
+ *      Perform a pseudo DMA mode read from an NCR53C400 or equivalent
  *      controller
  */
 
diff --git a/drivers/scsi/gdth.h b/drivers/scsi/gdth.h
index 120a0625a7b..d969855ac64 100644
--- a/drivers/scsi/gdth.h
+++ b/drivers/scsi/gdth.h
@@ -895,7 +895,7 @@ typedef struct {
         u8          ldr_no;                 /* log. drive no. */
         u8          rw_attribs;             /* r/w attributes */
         u8          cluster_type;           /* cluster properties */
-        u8          media_changed;          /* Flag:MOUNT/UNMOUNT occured */
+        u8          media_changed;          /* Flag:MOUNT/UNMOUNT occurred */
         u32         start_sec;              /* start sector */
     } hdr[MAX_LDRIVES];                         /* host drives */
     struct {
diff --git a/drivers/scsi/gvp11.c b/drivers/scsi/gvp11.c
index 2ce26eb7a1e..50bb54150a7 100644
--- a/drivers/scsi/gvp11.c
+++ b/drivers/scsi/gvp11.c
@@ -300,7 +300,7 @@ static int __devinit gvp11_probe(struct zorro_dev *z,
         /*
          * Rumors state that some GVP ram boards use the same product
          * code as the SCSI controllers. Therefore if the board-size
-         * is not 64KB we asume it is a ram board and bail out.
+         * is not 64KB we assume it is a ram board and bail out.
          */
         if (zorro_resource_len(z) != 0x10000)
                 return -ENODEV;
diff --git a/drivers/scsi/imm.c b/drivers/scsi/imm.c
index 99aa0e5699b..26cd9d1d757 100644
--- a/drivers/scsi/imm.c
+++ b/drivers/scsi/imm.c
@@ -3,7 +3,7 @@
  * 
  * (The IMM is the embedded controller in the ZIP Plus drive.)
  * 
- * My unoffical company acronym list is 21 pages long:
+ * My unofficial company acronym list is 21 pages long:
  *      FLA:    Four letter acronym with built in facility for
  *              future expansion to five letters.
  */
diff --git a/drivers/scsi/initio.c b/drivers/scsi/initio.c
index 9627d062e16..dd741bcd6cc 100644
--- a/drivers/scsi/initio.c
+++ b/drivers/scsi/initio.c
@@ -242,7 +242,7 @@ static u8 i91udftNvRam[64] =
 
 static u8 initio_rate_tbl[8] =  /* fast 20      */
 {
-                                /* nanosecond devide by 4 */
+                                /* nanosecond divide by 4 */
         12,                     /* 50ns,  20M   */
         18,                     /* 75ns,  13.3M */
         25,                     /* 100ns, 10M   */
@@ -1917,7 +1917,7 @@ static int int_initio_scsi_rst(struct initio_host * host)
 }
 
 /**
- *      int_initio_scsi_resel   -       Reselection occured
+ *      int_initio_scsi_resel   -       Reselection occurred
  *      @host: InitIO host adapter
  *
  *      A SCSI reselection event has been signalled and the interrupt
diff --git a/drivers/scsi/initio.h b/drivers/scsi/initio.h
index e58af9e9550..219b901bdc2 100644
--- a/drivers/scsi/initio.h
+++ b/drivers/scsi/initio.h
@@ -116,7 +116,7 @@ typedef struct {
 #define TUL_SBusId      0x89    /* 09 R   SCSI BUS ID                   */
 #define TUL_STimeOut    0x8A    /* 0A W   Sel/Resel Time Out Register   */
 #define TUL_SIdent      0x8A    /* 0A R   Identify Message Register     */
-#define TUL_SAvail      0x8A    /* 0A R   Availiable Counter Register   */
+#define TUL_SAvail      0x8A    /* 0A R   Available Counter Register   */
 #define TUL_SData       0x8B    /* 0B R/W SCSI data in/out              */
 #define TUL_SFifo       0x8C    /* 0C R/W FIFO                          */
 #define TUL_SSignal     0x90    /* 10 R/W SCSI signal in/out            */
@@ -389,7 +389,7 @@ struct scsi_ctrl_blk {
 /* Bit Definition for status */
 #define SCB_RENT        0x01
 #define SCB_PEND        0x02
-#define SCB_CONTIG      0x04    /* Contigent Allegiance */
+#define SCB_CONTIG      0x04    /* Contingent Allegiance */
 #define SCB_SELECT      0x08
 #define SCB_BUSY        0x10
 #define SCB_DONE        0x20
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index b2511acd39b..218f71a8726 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -137,7 +137,7 @@
 /*          - Fix path/name for scsi_hosts.h include for 2.6 kernels         */
 /*          - Fix sort order of 7k                                           */
 /*          - Remove 3 unused "inline" functions                             */
-/* 7.12.xx  - Use STATIC functions whereever possible                        */
+/* 7.12.xx  - Use STATIC functions wherever possible                        */
 /*          - Clean up deprecated MODULE_PARM calls                          */
 /* 7.12.05  - Remove Version Matching per IBM request                        */
 /*****************************************************************************/
@@ -1665,7 +1665,7 @@ ips_flash_copperhead(ips_ha_t * ha, ips_passthru_t * pt, ips_scb_t * scb)
         int datasize;
 
         /* Trombone is the only copperhead that can do packet flash, but only
-         * for firmware. No one said it had to make sence. */
+         * for firmware. No one said it had to make sense. */
         if (IPS_IS_TROMBONE(ha) && pt->CoppCP.cmd.flashfw.type == IPS_FW_IMAGE) {
                 if (ips_usrcmd(ha, pt, scb))
                         return IPS_SUCCESS;
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 4e49fbcfe8a..f2df0593332 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -1193,7 +1193,7 @@ typedef struct {
 #define IPS_VER_SEBRING "7.12.02"
 #define IPS_VER_KEYWEST "7.12.02"
 
-/* Compatability IDs for various adapters */
+/* Compatibility IDs for various adapters */
 #define IPS_COMPAT_UNKNOWN ""
 #define IPS_COMPAT_CURRENT "KW710"
 #define IPS_COMPAT_SERVERAID1 "2.25.01"
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index a860452a8f7..3df985305f6 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -295,7 +295,7 @@ static int iscsi_sw_tcp_xmit(struct iscsi_conn *conn)
                 rc = iscsi_sw_tcp_xmit_segment(tcp_conn, segment);
                 /*
                  * We may not have been able to send data because the conn
-                 * is getting stopped. libiscsi will know so propogate err
+                 * is getting stopped. libiscsi will know so propagate err
                  * for it to do the right thing.
                  */
                 if (rc == -EAGAIN)
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 28231badd9e..77035a746f6 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -1042,7 +1042,7 @@ static void fc_exch_set_addr(struct fc_exch *ep,
 }
 
 /**
- * fc_seq_els_rsp_send() - Send an ELS response using infomation from
+ * fc_seq_els_rsp_send() - Send an ELS response using information from
  *                         the existing sequence/exchange.
  * @fp:       The received frame
  * @els_cmd:  The ELS command to be sent
@@ -1153,7 +1153,7 @@ static void fc_seq_send_ack(struct fc_seq *sp, const struct fc_frame *rx_fp)
  * fc_exch_send_ba_rjt() - Send BLS Reject
  * @rx_fp:  The frame being rejected
  * @reason: The reason the frame is being rejected
- * @explan: The explaination for the rejection
+ * @explan: The explanation for the rejection
  *
  * This is for rejecting BA_ABTS only.
  */
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index b1b03af158b..5b799a37ad0 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -870,7 +870,7 @@ static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
                                 fsp->scsi_resid = ntohl(rp_ex->fr_resid);
                                 /*
                                  * The cmnd->underflow is the minimum number of
-                                 * bytes that must be transfered for this
+                                 * bytes that must be transferred for this
                                  * command.  Provided a sense condition is not
                                  * present, make sure the actual amount
                                  * transferred is at least the underflow value
@@ -1306,7 +1306,7 @@ static int fc_lun_reset(struct fc_lport *lport, struct fc_fcp_pkt *fsp,
 }
 
 /**
- * fc_tm_done() - Task Managment response handler
+ * fc_tm_done() - Task Management response handler
  * @seq: The sequence that the response is on
  * @fp:  The response frame
  * @arg: The FCP packet the response is for
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 8c08b210001..906bbcad0e2 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -52,7 +52,7 @@
  * while making the callback. To ensure that the rport is not free'd while
  * processing the callback the rport callbacks are serialized through a
  * single-threaded workqueue. An rport would never be free'd while in a
- * callback handler becuase no other rport work in this queue can be executed
+ * callback handler because no other rport work in this queue can be executed
  * at the same time.
  *
  * When discovery succeeds or fails a callback is made to the lport as
@@ -163,7 +163,7 @@ static int fc_frame_drop(struct fc_lport *lport, struct fc_frame *fp)
  * fc_lport_rport_callback() - Event handler for rport events
  * @lport: The lport which is receiving the event
  * @rdata: private remote port data
- * @event: The event that occured
+ * @event: The event that occurred
  *
  * Locking Note: The rport lock should not be held when calling
  *               this function.
@@ -379,7 +379,7 @@ static void fc_lport_add_fc4_type(struct fc_lport *lport, enum fc_fh_type type)
 
 /**
  * fc_lport_recv_rlir_req() - Handle received Registered Link Incident Report.
- * @lport: Fibre Channel local port recieving the RLIR
+ * @lport: Fibre Channel local port receiving the RLIR
  * @fp:    The RLIR request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -396,7 +396,7 @@ static void fc_lport_recv_rlir_req(struct fc_lport *lport, struct fc_frame *fp)
 
 /**
  * fc_lport_recv_echo_req() - Handle received ECHO request
- * @lport: The local port recieving the ECHO
+ * @lport: The local port receiving the ECHO
  * @fp:    ECHO request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -432,7 +432,7 @@ static void fc_lport_recv_echo_req(struct fc_lport *lport,
 
 /**
  * fc_lport_recv_rnid_req() - Handle received Request Node ID data request
- * @lport: The local port recieving the RNID
+ * @lport: The local port receiving the RNID
  * @fp:    The RNID request frame
  *
  * Locking Note: The lport lock is expected to be held before calling
@@ -491,7 +491,7 @@ static void fc_lport_recv_rnid_req(struct fc_lport *lport,
 
 /**
  * fc_lport_recv_logo_req() - Handle received fabric LOGO request
- * @lport: The local port recieving the LOGO
+ * @lport: The local port receiving the LOGO
  * @fp:    The LOGO request frame
  *
  * Locking Note: The lport lock is exected to be held before calling
@@ -771,7 +771,7 @@ EXPORT_SYMBOL(fc_lport_set_local_id);
 
 /**
  * fc_lport_recv_flogi_req() - Receive a FLOGI request
- * @lport: The local port that recieved the request
+ * @lport: The local port that received the request
  * @rx_fp: The FLOGI frame
  *
  * A received FLOGI request indicates a point-to-point connection.
@@ -858,7 +858,7 @@ out:
  * if an rport should handle the request.
  *
  * Locking Note: This function should not be called with the lport
- *               lock held becuase it will grab the lock.
+ *               lock held because it will grab the lock.
  */
 static void fc_lport_recv_els_req(struct fc_lport *lport,
                                   struct fc_frame *fp)
@@ -925,7 +925,7 @@ struct fc4_prov fc_lport_els_prov = {
  * @fp: The frame the request is in
  *
  * Locking Note: This function should not be called with the lport
- *               lock held becuase it may grab the lock.
+ *               lock held because it may grab the lock.
  */
 static void fc_lport_recv_req(struct fc_lport *lport,
                               struct fc_frame *fp)
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index f3f693b772a..874e29d9533 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -240,7 +240,7 @@ static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
                                        disc_resp, DISCOVER_RESP_SIZE);
                 if (res)
                         return res;
-                /* This is detecting a failure to transmit inital
+                /* This is detecting a failure to transmit initial
                  * dev to host FIS as described in section G.5 of
                  * sas-2 r 04b */
                 dr = &((struct smp_resp *)disc_resp)->disc;
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 4e0faa00b96..17d789325f4 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -4515,7 +4515,7 @@ static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
  * Description:
  * This function is called by the transport after the @fc_vport's symbolic name
  * has been changed. This function re-registers the symbolic name with the
- * switch to propogate the change into the fabric if the vport is active.
+ * switch to propagate the change into the fabric if the vport is active.
  **/
 static void
 lpfc_set_vport_symbolic_name(struct fc_vport *fc_vport)
diff --git a/drivers/scsi/lpfc/lpfc_bsg.c b/drivers/scsi/lpfc/lpfc_bsg.c
index 793b9f1131f..77b2871d96b 100644
--- a/drivers/scsi/lpfc/lpfc_bsg.c
+++ b/drivers/scsi/lpfc/lpfc_bsg.c
@@ -1939,7 +1939,7 @@ out:
  * @rxxri: Receive exchange id
  * @len: Number of data bytes
  *
- * This function allocates and posts a data buffer of sufficient size to recieve
+ * This function allocates and posts a data buffer of sufficient size to receive
  * an unsolicted CT command.
  **/
 static int lpfcdiag_loop_post_rxbufs(struct lpfc_hba *phba, uint16_t rxxri,
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index a753581509d..3d967741c70 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -908,7 +908,7 @@ lpfc_debugfs_dumpData_open(struct inode *inode, struct file *file)
         if (!debug)
                 goto out;
 
-        /* Round to page boundry */
+        /* Round to page boundary */
         printk(KERN_ERR "9059 BLKGRD:  %s: _dump_buf_data=0x%p\n",
                         __func__, _dump_buf_data);
         debug->buffer = _dump_buf_data;
@@ -938,7 +938,7 @@ lpfc_debugfs_dumpDif_open(struct inode *inode, struct file *file)
         if (!debug)
                 goto out;
 
-        /* Round to page boundry */
+        /* Round to page boundary */
         printk(KERN_ERR "9060 BLKGRD: %s: _dump_buf_dif=0x%p file=%s\n",
                 __func__, _dump_buf_dif, file->f_dentry->d_name.name);
         debug->buffer = _dump_buf_dif;
@@ -2158,7 +2158,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
                         debugfs_create_dir(name, phba->hba_debugfs_root);
                 if (!vport->vport_debugfs_root) {
                         lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-                                         "0417 Cant create debugfs\n");
+                                         "0417 Can't create debugfs\n");
                         goto debug_failed;
                 }
                 atomic_inc(&phba->debugfs_vport_count);
@@ -2211,7 +2211,7 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
                                  vport, &lpfc_debugfs_op_nodelist);
         if (!vport->debug_nodelist) {
                 lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-                                 "0409 Cant create debugfs nodelist\n");
+                                 "0409 Can't create debugfs nodelist\n");
                 goto debug_failed;
         }
 
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 735028fedda..d34b69f9cdb 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -102,7 +102,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
                          phba->pport->port_state);
 
         /* CLEAR_LA should re-enable link attention events and
-         * we should then imediately take a LATT event. The
+         * we should then immediately take a LATT event. The
          * LATT processing should call lpfc_linkdown() which
          * will cleanup any left over in-progress discovery
          * events.
@@ -1599,7 +1599,7 @@ out:
  * This routine is the completion callback function for issuing the Port
  * Login (PLOGI) command. For PLOGI completion, there must be an active
  * ndlp on the vport node list that matches the remote node ID from the
- * PLOGI reponse IOCB. If such ndlp does not exist, the PLOGI is simply
+ * PLOGI response IOCB. If such ndlp does not exist, the PLOGI is simply
  * ignored and command IOCB released. The PLOGI response IOCB status is
  * checked for error conditons. If there is error status reported, PLOGI
  * retry shall be attempted by invoking the lpfc_els_retry() routine.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 154c715fb3a..301498301a8 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -739,7 +739,7 @@ lpfc_do_work(void *p)
 
 /*
  * This is only called to handle FC worker events. Since this a rare
- * occurance, we allocate a struct lpfc_work_evt structure here instead of
+ * occurrence, we allocate a struct lpfc_work_evt structure here instead of
  * embedding it in the IOCB.
  */
 int
@@ -1348,7 +1348,7 @@ lpfc_register_fcf(struct lpfc_hba *phba)
         int rc;
 
         spin_lock_irq(&phba->hbalock);
-        /* If the FCF is not availabe do nothing. */
+        /* If the FCF is not available do nothing. */
         if (!(phba->fcf.fcf_flag & FCF_AVAILABLE)) {
                 phba->hba_flag &= ~(FCF_TS_INPROG | FCF_RR_INPROG);
                 spin_unlock_irq(&phba->hbalock);
@@ -1538,7 +1538,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
 
                 /*
                  * If user did not specify any addressing mode, or if the
-                 * prefered addressing mode specified by user is not supported
+                 * preferred addressing mode specified by user is not supported
                  * by FCF, allow fabric to pick the addressing mode.
                  */
                 *addr_mode = bf_get(lpfc_fcf_record_mac_addr_prov,
@@ -1553,7 +1553,7 @@ lpfc_match_fcf_conn_list(struct lpfc_hba *phba,
                                 FCFCNCT_AM_SPMA) ?
                                 LPFC_FCF_SPMA : LPFC_FCF_FPMA;
                 /*
-                 * If the user specified a prefered address mode, use the
+                 * If the user specified a preferred address mode, use the
                  * addr mode only if FCF support the addr_mode.
                  */
                 else if ((conn_entry->conn_rec.flags & FCFCNCT_AM_VALID) &&
@@ -3117,7 +3117,7 @@ lpfc_mbx_cmpl_reg_login(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
                  * back at reg login state so this
                  * mbox needs to be ignored becase
                  * there is another reg login in
-                 * proccess.
+                 * process.
                  */
                 spin_lock_irq(shost->host_lock);
                 ndlp->nlp_flag &= ~NLP_IGNR_REG_CMPL;
@@ -4477,7 +4477,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
         if ((vport->fc_flag & FC_RSCN_MODE) &&
             !(vport->fc_flag & FC_NDISC_ACTIVE)) {
                 if (lpfc_rscn_payload_check(vport, did)) {
-                        /* If we've already recieved a PLOGI from this NPort
+                        /* If we've already received a PLOGI from this NPort
                          * we don't need to try to discover it again.
                          */
                         if (ndlp->nlp_flag & NLP_RCV_PLOGI)
@@ -4493,7 +4493,7 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
                 } else
                         ndlp = NULL;
         } else {
-                /* If we've already recieved a PLOGI from this NPort,
+                /* If we've already received a PLOGI from this NPort,
                  * or we are already in the process of discovery on it,
                  * we don't need to try to discover it again.
                  */
@@ -5756,7 +5756,7 @@ lpfc_read_fcoe_param(struct lpfc_hba *phba,
  * @size: Size of the data buffer.
  * @rec_type: Record type to be searched.
  *
- * This function searches config region data to find the begining
+ * This function searches config region data to find the beginning
  * of the record specified by record_type. If record found, this
  * function return pointer to the record else return NULL.
  */
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index e6ebe516cfb..505f88443b5 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -4466,7 +4466,7 @@ lpfc_sli4_driver_resource_unset(struct lpfc_hba *phba)
 }
 
 /**
- * lpfc_init_api_table_setup - Set up init api fucntion jump table
+ * lpfc_init_api_table_setup - Set up init api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -4850,7 +4850,7 @@ out_free_mem:
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -5730,7 +5730,7 @@ lpfc_destroy_bootstrap_mbox(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5835,7 +5835,7 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -5894,7 +5894,7 @@ lpfc_setup_endian_order(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static int
@@ -6189,7 +6189,7 @@ out_error:
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 static void
@@ -6253,7 +6253,7 @@ lpfc_sli4_queue_destroy(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
@@ -6498,7 +6498,7 @@ out_error:
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 void
@@ -6543,7 +6543,7 @@ lpfc_sli4_queue_unset(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  **/
 static int
 lpfc_sli4_cq_event_pool_create(struct lpfc_hba *phba)
@@ -6704,7 +6704,7 @@ lpfc_sli4_cq_event_release_all(struct lpfc_hba *phba)
  *
  * Return codes
  *      0 - successful
- *      -ENOMEM - No availble memory
+ *      -ENOMEM - No available memory
  *      -EIO - The mailbox failed to complete successfully.
  **/
 int
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index dba32dfdb59..fbab9734e9b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1834,7 +1834,7 @@ lpfc_sli4_mbox_opcode_get(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * @fcf_index: index to fcf table.
  *
  * This routine routine allocates and constructs non-embedded mailbox command
- * for reading a FCF table entry refered by @fcf_index.
+ * for reading a FCF table entry referred by @fcf_index.
  *
  * Return: pointer to the mailbox command constructed if successful, otherwise
  * NULL.
diff --git a/drivers/scsi/lpfc/lpfc_nl.h b/drivers/scsi/lpfc/lpfc_nl.h
index f3cfbe2ce98..f2b1bbcb196 100644
--- a/drivers/scsi/lpfc/lpfc_nl.h
+++ b/drivers/scsi/lpfc/lpfc_nl.h
@@ -50,7 +50,7 @@
  * and subcategory. The event type must come first.
  * The subcategory further defines the data that follows in the rest
  * of the payload. Each category will have its own unique header plus
- * any addtional data unique to the subcategory.
+ * any additional data unique to the subcategory.
  * The payload sent via the fc transport is one-way driver->application.
  */
 
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 52b35159fc3..0d92d4205ea 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -658,7 +658,7 @@ lpfc_disc_set_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
         return 0;
 }
 /**
- * lpfc_release_rpi - Release a RPI by issueing unreg_login mailbox cmd.
+ * lpfc_release_rpi - Release a RPI by issuing unreg_login mailbox cmd.
  * @phba : Pointer to lpfc_hba structure.
  * @vport: Pointer to lpfc_vport structure.
  * @rpi  : rpi to be release.
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 2b962b020cf..fe7cc84e773 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -577,7 +577,7 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
                         iocb->un.fcpi64.bdl.addrHigh = 0;
                         iocb->ulpBdeCount = 0;
                         iocb->ulpLe = 0;
-                        /* fill in responce BDE */
+                        /* fill in response BDE */
                         iocb->unsli3.fcp_ext.rbde.tus.f.bdeFlags =
                                                         BUFF_TYPE_BDE_64;
                         iocb->unsli3.fcp_ext.rbde.tus.f.bdeSize =
@@ -1217,10 +1217,10 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
                                      (2 * sizeof(struct ulp_bde64)));
                         data_bde->addrHigh = putPaddrHigh(physaddr);
                         data_bde->addrLow = putPaddrLow(physaddr);
-                        /* ebde count includes the responce bde and data bpl */
+                        /* ebde count includes the response bde and data bpl */
                         iocb_cmd->unsli3.fcp_ext.ebde_count = 2;
                 } else {
-                        /* ebde count includes the responce bde and data bdes */
+                        /* ebde count includes the response bde and data bdes */
                         iocb_cmd->unsli3.fcp_ext.ebde_count = (num_bde + 1);
                 }
         } else {
@@ -2380,7 +2380,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
                 }
                 /*
                  * The cmnd->underflow is the minimum number of bytes that must
-                 * be transfered for this command.  Provided a sense condition
+                 * be transferred for this command.  Provided a sense condition
                  * is not present, make sure the actual amount transferred is at
                  * least the underflow value or fail.
                  */
@@ -2873,7 +2873,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
 }
 
 /**
- * lpfc_scsi_api_table_setup - Set up scsi api fucntion jump table
+ * lpfc_scsi_api_table_setup - Set up scsi api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
diff --git a/drivers/scsi/lpfc/lpfc_scsi.h b/drivers/scsi/lpfc/lpfc_scsi.h
index 5932273870a..ce645b20a6a 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.h
+++ b/drivers/scsi/lpfc/lpfc_scsi.h
@@ -130,7 +130,7 @@ struct lpfc_scsi_buf {
         dma_addr_t nonsg_phys;  /* Non scatter-gather physical address. */
 
         /*
-         * data and dma_handle are the kernel virutal and bus address of the
+         * data and dma_handle are the kernel virtual and bus address of the
          * dma-able buffer containing the fcp_cmd, fcp_rsp and a scatter
          * gather bde list that supports the sg_tablesize value.
          */
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4746dcd756d..dacabbe0a58 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -2817,7 +2817,7 @@ void lpfc_poll_eratt(unsigned long ptr)
  * This function is called from the interrupt context when there is a ring
  * event for the fcp ring. The caller does not hold any lock.
  * The function processes each response iocb in the response ring until it
- * finds an iocb with LE bit set and chains all the iocbs upto the iocb with
+ * finds an iocb with LE bit set and chains all the iocbs up to the iocb with
  * LE bit set. The function will call the completion handler of the command iocb
  * if the response iocb indicates a completion for a command iocb or it is
  * an abort completion. The function will call lpfc_sli_process_unsol_iocb
@@ -5117,7 +5117,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
 
         /* Setting state unknown so lpfc_sli_abort_iocb_ring
          * would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
-         * it to fail all oustanding SCSI IO.
+         * it to fail all outstanding SCSI IO.
          */
         spin_lock_irq(&phba->pport->work_port_lock);
         phba->pport->work_port_events &= ~WORKER_MBOX_TMO;
@@ -6031,7 +6031,7 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
 }
 
 /**
- * lpfc_mbox_api_table_setup - Set up mbox api fucntion jump table
+ * lpfc_mbox_api_table_setup - Set up mbox api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -6847,7 +6847,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, uint32_t ring_number,
 }
 
 /**
- * lpfc_sli_api_table_setup - Set up sli api fucntion jump table
+ * lpfc_sli_api_table_setup - Set up sli api function jump table
  * @phba: The hba struct for which this call is being executed.
  * @dev_grp: The HBA PCI-Device group number.
  *
@@ -7521,7 +7521,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
         struct lpfc_dmabuf *mp, *next_mp;
         struct list_head *slp = &pring->postbufq;
 
-        /* Search postbufq, from the begining, looking for a match on tag */
+        /* Search postbufq, from the beginning, looking for a match on tag */
         spin_lock_irq(&phba->hbalock);
         list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
                 if (mp->buffer_tag == tag) {
@@ -7565,7 +7565,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
         struct lpfc_dmabuf *mp, *next_mp;
         struct list_head *slp = &pring->postbufq;
 
-        /* Search postbufq, from the begining, looking for a match on phys */
+        /* Search postbufq, from the beginning, looking for a match on phys */
         spin_lock_irq(&phba->hbalock);
         list_for_each_entry_safe(mp, next_mp, &pring->postbufq, list) {
                 if (mp->phys == phys) {
@@ -8438,7 +8438,7 @@ lpfc_sli_mbox_sys_shutdown(struct lpfc_hba *phba)
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8491,7 +8491,7 @@ unplug_err:
  * for possible error attention events. The caller must hold the hostlock
  * with spin_lock_irq().
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 static int
@@ -8581,7 +8581,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba)
  * This function is called from timer soft interrupt context to check HBA's
  * error attention register bit for error attention events.
  *
- * This fucntion returns 1 when there is Error Attention in the Host Attention
+ * This function returns 1 when there is Error Attention in the Host Attention
  * Register and returns 0 otherwise.
  **/
 int
@@ -9684,7 +9684,7 @@ out:
  * @cq: Pointer to the completion queue.
  * @wcqe: Pointer to a completion queue entry.
  *
- * This routine process a slow-path work-queue or recieve queue completion queue
+ * This routine process a slow-path work-queue or receive queue completion queue
  * entry.
  *
  * Return: true if work posted to worker thread, otherwise false.
@@ -12971,7 +12971,7 @@ lpfc_sli4_build_dflt_fcf_record(struct lpfc_hba *phba,
  * record and processing it one at a time starting from the @fcf_index
  * for initial FCF discovery or fast FCF failover rediscovery.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -13032,7 +13032,7 @@ fail_fcf_scan:
  * This routine is invoked to read an FCF record indicated by @fcf_index
  * and to use it for FLOGI roundrobin FCF failover.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
@@ -13078,7 +13078,7 @@ fail_fcf_read:
  * This routine is invoked to read an FCF record indicated by @fcf_index to
  * determine whether it's eligible for FLOGI roundrobin failover list.
  *
- * Return 0 if the mailbox command is submitted sucessfully, none 0
+ * Return 0 if the mailbox command is submitted successfully, none 0
  * otherwise.
  **/
 int
diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
index c212694a971..f2684dd09ed 100644
--- a/drivers/scsi/megaraid.c
+++ b/drivers/scsi/megaraid.c
@@ -284,7 +284,7 @@ mega_query_adapter(adapter_t *adapter)
 
         adapter->host->max_id = 16;     /* max targets per channel */
 
-        adapter->host->max_lun = 7;     /* Upto 7 luns for non disk devices */
+        adapter->host->max_lun = 7;     /* Up to 7 luns for non disk devices */
 
         adapter->host->cmd_per_lun = max_cmd_per_lun;
 
@@ -3734,7 +3734,7 @@ mega_m_to_n(void __user *arg, nitioctl_t *uioc)
          * check is the application conforms to NIT. We do not have to do much
          * in that case.
          * We exploit the fact that the signature is stored in the very
-         * begining of the structure.
+         * beginning of the structure.
          */
 
         if( copy_from_user(signature, arg, 7) )
diff --git a/drivers/scsi/megaraid.h b/drivers/scsi/megaraid.h
index 853411911b2..9a7897f8ca4 100644
--- a/drivers/scsi/megaraid.h
+++ b/drivers/scsi/megaraid.h
@@ -532,9 +532,9 @@ struct uioctl_t {
 
 /*
  * struct mcontroller is used to pass information about the controllers in the
- * system. Its upto the application how to use the information. We are passing
+ * system. Its up to the application how to use the information. We are passing
  * as much info about the cards as possible and useful. Before issuing the
- * call to find information about the cards, the applicaiton needs to issue a
+ * call to find information about the cards, the application needs to issue a
  * ioctl first to find out the number of controllers in the system.
  */
 #define MAX_CONTROLLERS 32
@@ -804,7 +804,7 @@ typedef struct {
         unsigned long           base;
         void __iomem            *mmio_base;
 
-        /* mbox64 with mbox not aligned on 16-byte boundry */
+        /* mbox64 with mbox not aligned on 16-byte boundary */
         mbox64_t        *una_mbox64;
         dma_addr_t      una_mbox64_dma;
 
diff --git a/drivers/scsi/megaraid/mbox_defs.h b/drivers/scsi/megaraid/mbox_defs.h
index ce2487a888e..e01c6f7c2ca 100644
--- a/drivers/scsi/megaraid/mbox_defs.h
+++ b/drivers/scsi/megaraid/mbox_defs.h
@@ -660,7 +660,7 @@ typedef struct {
  * @lparam      : logical drives parameters
  * @span        : span
  *
- * 8-LD logical drive with upto 8 spans
+ * 8-LD logical drive with up to 8 spans
  */
 typedef struct {
         logdrv_param_t  lparam;
@@ -673,7 +673,7 @@ typedef struct {
  * @lparam      : logical drives parameters
  * @span        : span
  *
- * 8-LD logical drive with upto 4 spans
+ * 8-LD logical drive with up to 4 spans
  */
 typedef struct {
         logdrv_param_t  lparam;
@@ -720,7 +720,7 @@ typedef struct {
  * @ldrv        : logical drives information
  * @pdrv        : physical drives information
  *
- * Disk array for 8LD logical drives with upto 8 spans
+ * Disk array for 8LD logical drives with up to 8 spans
  */
 typedef struct {
         uint8_t                 numldrv;
@@ -737,7 +737,7 @@ typedef struct {
  * @ldrv        : logical drives information
  * @pdrv        : physical drives information
  *
- * Disk array for 8LD logical drives with upto 4 spans
+ * Disk array for 8LD logical drives with up to 4 spans
  */
 typedef struct {
         uint8_t                 numldrv;
diff --git a/drivers/scsi/megaraid/megaraid_mbox.c b/drivers/scsi/megaraid/megaraid_mbox.c
index 5708cb27d07..1dba32870b4 100644
--- a/drivers/scsi/megaraid/megaraid_mbox.c
+++ b/drivers/scsi/megaraid/megaraid_mbox.c
@@ -2689,7 +2689,7 @@ megaraid_reset_handler(struct scsi_cmnd *scp)
                                 (MBOX_RESET_WAIT + MBOX_RESET_EXT_WAIT) - i));
                 }
 
-                // bailout if no recovery happended in reset time
+                // bailout if no recovery happened in reset time
                 if (adapter->outstanding_cmds == 0) {
                         break;
                 }
@@ -3452,7 +3452,7 @@ megaraid_mbox_display_scb(adapter_t *adapter, scb_t *scb)
  * megaraid_mbox_setup_device_map - manage device ids
  * @adapter     : Driver's soft state
  *
- * Manange the device ids to have an appropraite mapping between the kernel
+ * Manange the device ids to have an appropriate mapping between the kernel
  * scsi addresses and megaraid scsi and logical drive addresses. We export
  * scsi devices on their actual addresses, whereas the logical drives are
  * exported on a virtual scsi channel.
@@ -3973,7 +3973,7 @@ megaraid_sysfs_get_ldmap_timeout(unsigned long data)
  * NOTE: The commands issuance functionality is not generalized and
  * implemented in context of "get ld map" command only. If required, the
  * command issuance logical can be trivially pulled out and implemented as a
- * standalone libary. For now, this should suffice since there is no other
+ * standalone library. For now, this should suffice since there is no other
  * user of this interface.
  *
  * Return 0 on success.
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 635b228c3ea..046dcc672ec 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -1347,7 +1347,7 @@ struct megasas_instance {
         struct timer_list io_completion_timer;
         struct list_head internal_reset_pending_q;
 
-        /* Ptr to hba specfic information */
+        /* Ptr to hba specific information */
         void *ctrl_context;
         u8      msi_flag;
         struct msix_entry msixentry;
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index bbd10c81fd9..66d4cea4df9 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -1698,7 +1698,7 @@ void megasas_do_ocr(struct megasas_instance *instance)
  * megasas_wait_for_outstanding -       Wait for all outstanding cmds
  * @instance:                           Adapter soft state
  *
- * This function waits for upto MEGASAS_RESET_WAIT_TIME seconds for FW to
+ * This function waits for up to MEGASAS_RESET_WAIT_TIME seconds for FW to
  * complete all its outstanding commands. Returns error if one or more IOs
  * are pending after this time period. It also marks the controller dead.
  */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_init.h b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
index 20e6b886934..165454d5259 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_init.h
@@ -21,7 +21,7 @@
  *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
  *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
  *                      Control field Task Attribute flags.
- *                      Moved LUN field defines to mpi2.h becasue they are
+ *                      Moved LUN field defines to mpi2.h because they are
  *                      common to many structures.
  *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
  *                      Query Asynchronous Event.
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 5e001ffd4c1..3346357031e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -925,7 +925,7 @@ _base_interrupt(int irq, void *bus_id)
 }
 
 /**
- * mpt2sas_base_release_callback_handler - clear interupt callback handler
+ * mpt2sas_base_release_callback_handler - clear interrupt callback handler
  * @cb_idx: callback index
  *
  * Return nothing.
@@ -1113,7 +1113,7 @@ _base_restore_msix_table(struct MPT2SAS_ADAPTER *ioc)
  * @ioc: per adapter object
  *
  * Check to see if card is capable of MSIX, and set number
- * of avaliable msix vectors
+ * of available msix vectors
  */
 static int
 _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc)
@@ -1595,7 +1595,7 @@ mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid, u16 handle)
 
 
 /**
- * mpt2sas_base_put_smid_hi_priority - send Task Managment request to firmware
+ * mpt2sas_base_put_smid_hi_priority - send Task Management request to firmware
  * @ioc: per adapter object
  * @smid: system request message index
  *
@@ -2599,7 +2599,7 @@ _base_wait_for_doorbell_int(struct MPT2SAS_ADAPTER *ioc, int timeout,
                 int_status = readl(&ioc->chip->HostInterruptStatus);
                 if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
                         dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-                            "successfull count(%d), timeout(%d)\n", ioc->name,
+                            "successful count(%d), timeout(%d)\n", ioc->name,
                             __func__, count, timeout));
                         return 0;
                 }
@@ -2640,7 +2640,7 @@ _base_wait_for_doorbell_ack(struct MPT2SAS_ADAPTER *ioc, int timeout,
                 int_status = readl(&ioc->chip->HostInterruptStatus);
                 if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
                         dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-                            "successfull count(%d), timeout(%d)\n", ioc->name,
+                            "successful count(%d), timeout(%d)\n", ioc->name,
                             __func__, count, timeout));
                         return 0;
                 } else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
@@ -2688,7 +2688,7 @@ _base_wait_for_doorbell_not_used(struct MPT2SAS_ADAPTER *ioc, int timeout,
                 doorbell_reg = readl(&ioc->chip->Doorbell);
                 if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
                         dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: "
-                            "successfull count(%d), timeout(%d)\n", ioc->name,
+                            "successful count(%d), timeout(%d)\n", ioc->name,
                             __func__, count, timeout));
                         return 0;
                 }
diff --git a/drivers/scsi/mpt2sas/mpt2sas_config.c b/drivers/scsi/mpt2sas/mpt2sas_config.c
index 6afd67b324f..6861244249a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_config.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_config.c
@@ -93,7 +93,7 @@ struct config_request{
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index e92b77af548..1c6d2b405ee 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -116,7 +116,7 @@ _ctl_sas_device_find_by_handle(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * @mpi_reply: reply message frame
  * Context: none.
  *
- * Function for displaying debug info helpfull when debugging issues
+ * Function for displaying debug info helpful when debugging issues
  * in this module.
  */
 static void
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 6ceb7759bfe..d2064a0533a 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -397,7 +397,7 @@ _scsih_get_sas_address(struct MPT2SAS_ADAPTER *ioc, u16 handle,
  * @is_raid: [flag] 1 = raid object, 0 = sas object
  *
  * Determines whether this device should be first reported device to
- * to scsi-ml or sas transport, this purpose is for persistant boot device.
+ * to scsi-ml or sas transport, this purpose is for persistent boot device.
  * There are primary, alternate, and current entries in bios page 2. The order
  * priority is primary, alternate, then current.  This routine saves
  * the corresponding device object and is_raid flag in the ioc object.
@@ -2671,10 +2671,10 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
  * @handle: device handle
  * Context: interrupt time.
  *
- * This code is to initiate the device removal handshake protocal
+ * This code is to initiate the device removal handshake protocol
  * with controller firmware.  This function will issue target reset
  * using high priority request queue.  It will send a sas iounit
- * controll request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
+ * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
  *
  * This is designed to send muliple task management request at the same
  * time to the fifo. If the fifo is full, we will append the request,
@@ -2749,9 +2749,9 @@ _scsih_tm_tr_send(struct MPT2SAS_ADAPTER *ioc, u16 handle)
  * @reply: reply message frame(lower 32bit addr)
  * Context: interrupt time.
  *
- * This is the sas iounit controll completion routine.
+ * This is the sas iounit control completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
+ * handshake protocol with controller firmware.
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2878,8 +2878,8 @@ _scsih_tm_volume_tr_complete(struct MPT2SAS_ADAPTER *ioc, u16 smid,
  *
  * This is the target reset completion routine.
  * This code is part of the code to initiate the device removal
- * handshake protocal with controller firmware.
- * It will send a sas iounit controll request (MPI2_SAS_OP_REMOVE_DEVICE)
+ * handshake protocol with controller firmware.
+ * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
  *
  * Return 1 meaning mf should be freed from _base_interrupt
  *        0 means the mf is freed from this function.
@@ -2984,7 +2984,7 @@ _scsih_check_for_pending_tm(struct MPT2SAS_ADAPTER *ioc, u16 smid)
  *
  * This routine added to better handle cable breaker.
  *
- * This handles the case where driver recieves multiple expander
+ * This handles the case where driver receives multiple expander
  * add and delete events in a single shot.  When there is a delete event
  * the routine will void any pending add events waiting in the event queue.
  *
@@ -3511,7 +3511,7 @@ _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
 
 #ifdef CONFIG_SCSI_MPT2SAS_LOGGING
 /**
- * _scsih_scsi_ioc_info - translated non-successfull SCSI_IO request
+ * _scsih_scsi_ioc_info - translated non-successful SCSI_IO request
  * @ioc: per adapter object
  * @scmd: pointer to scsi command object
  * @mpi_reply: reply mf payload returned from firmware
@@ -5138,7 +5138,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc,
         unsigned long flags;
         int r;
 
-        dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primative: "
+        dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "broadcast primitive: "
             "phy number(%d), width(%d)\n", ioc->name, event_data->PhyNum,
             event_data->PortWidth));
         dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter\n", ioc->name,
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 46cc3825638..835d8d66e69 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -2679,7 +2679,7 @@ static	struct script script0 __initdata = {
 }/*-------------------------< RESEL_TAG >-------------------*/,{
         /*
         **      Read IDENTIFY + SIMPLE + TAG using a single MOVE.
-        **      Agressive optimization, is'nt it?
+        **      Aggressive optimization, is'nt it?
         **      No need to test the SIMPLE TAG message, since the 
         **      driver only supports conformant devices for tags. ;-)
         */
diff --git a/drivers/scsi/nsp32.c b/drivers/scsi/nsp32.c
index 6b8b021400f..f6a50c98c36 100644
--- a/drivers/scsi/nsp32.c
+++ b/drivers/scsi/nsp32.c
@@ -1288,7 +1288,7 @@ static irqreturn_t do_nsp32_isr(int irq, void *dev_id)
                         nsp32_dbg(NSP32_DEBUG_INTR, "SSACK=0x%lx", 
                                     nsp32_read4(base, SAVED_SACK_CNT));
 
-                        scsi_set_resid(SCpnt, 0); /* all data transfered! */
+                        scsi_set_resid(SCpnt, 0); /* all data transferred! */
                 }
 
                 /*
@@ -1630,7 +1630,7 @@ static int nsp32_busfree_occur(struct scsi_cmnd *SCpnt, unsigned short execph)
 
                         /*
                          * If SAVEDSACKCNT == 0, it means SavedDataPointer is
-                         * come after data transfering.
+                         * come after data transferring.
                          */
                         if (s_sacklen > 0) {
                                 /*
@@ -1785,7 +1785,7 @@ static void nsp32_adjust_busfree(struct scsi_cmnd *SCpnt, unsigned int s_sacklen
                    the head element of the sg. restlen is correctly calculated. */
         }
 
-        /* calculate the rest length for transfering */
+        /* calculate the rest length for transferring */
         restlen = sentlen - s_sacklen;
 
         /* update adjusting current SG table entry */
diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h
index 9565acf1aa7..c0221829069 100644
--- a/drivers/scsi/nsp32.h
+++ b/drivers/scsi/nsp32.h
@@ -507,7 +507,7 @@ typedef struct _nsp32_lunt {
 /*
  * SCSI TARGET/LUN definition
  */
-#define NSP32_HOST_SCSIID    7  /* SCSI initiator is everytime defined as 7 */
+#define NSP32_HOST_SCSIID    7  /* SCSI initiator is every time defined as 7 */
 #define MAX_TARGET           8
 #define MAX_LUN              8  /* XXX: In SPI3, max number of LUN is 64. */
 
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 521e2182d45..58f5be4740e 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -1366,7 +1366,7 @@ error:
 /* The values below are based on the OnStream frame payload size of 32K == 2**15,
  * that is, OSST_FRAME_SHIFT + OSST_SECTOR_SHIFT must be 15. With a minimum block
  * size of 512 bytes, we need to be able to resolve 32K/512 == 64 == 2**6 positions
- * inside each frame. Finaly, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
+ * inside each frame. Finally, OSST_SECTOR_MASK == 2**OSST_FRAME_SHIFT - 1.
  */
 #define OSST_FRAME_SHIFT  6
 #define OSST_SECTOR_SHIFT 9
@@ -3131,7 +3131,7 @@ static int osst_flush_write_buffer(struct osst_tape *STp, struct osst_request **
                 }
 #if DEBUG
                 if (debugging)
-                        printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transfering %d bytes in %d lblocks.\n",
+                        printk(OSST_DEB_MSG "%s:D: Flushing %d bytes, Transferring %d bytes in %d lblocks.\n",
                                                  name, offset, transfer, blks);
 #endif
 
@@ -3811,7 +3811,7 @@ static ssize_t osst_read(struct file * filp, char __user * buf, size_t count, lo
 
                         if (transfer == 0) {
                                 printk(KERN_WARNING
-                                  "%s:W: Nothing can be transfered, requested %Zd, tape block size (%d%c).\n",
+                                  "%s:W: Nothing can be transferred, requested %Zd, tape block size (%d%c).\n",
                                         name, count, STp->block_size < 1024?
                                         STp->block_size:STp->block_size/1024,
                                         STp->block_size<1024?'b':'k');
diff --git a/drivers/scsi/osst.h b/drivers/scsi/osst.h
index 11d26c57f3f..b4fea98ba27 100644
--- a/drivers/scsi/osst.h
+++ b/drivers/scsi/osst.h
@@ -413,7 +413,7 @@ typedef struct os_dat_s {
  * AUX
  */
 typedef struct os_aux_s {
-        __be32          format_id;              /* hardware compability AUX is based on */
+        __be32          format_id;              /* hardware compatibility AUX is based on */
         char            application_sig[4];     /* driver used to write this media */
         __be32          hdwr;                   /* reserved */
         __be32          update_frame_cntr;      /* for configuration frame */
diff --git a/drivers/scsi/pcmcia/nsp_cs.c b/drivers/scsi/pcmcia/nsp_cs.c
index be3f33d31a9..54bdf6d85c6 100644
--- a/drivers/scsi/pcmcia/nsp_cs.c
+++ b/drivers/scsi/pcmcia/nsp_cs.c
@@ -742,7 +742,7 @@ static void nsp_pio_read(struct scsi_cmnd *SCpnt)
 
                 res = nsp_fifo_count(SCpnt) - ocount;
                 //nsp_dbg(NSP_DEBUG_DATA_IO, "ptr=0x%p this=0x%x ocount=0x%x res=0x%x", SCpnt->SCp.ptr, SCpnt->SCp.this_residual, ocount, res);
-                if (res == 0) { /* if some data avilable ? */
+                if (res == 0) { /* if some data available ? */
                         if (stat == BUSPHASE_DATA_IN) { /* phase changed? */
                                 //nsp_dbg(NSP_DEBUG_DATA_IO, " wait for data this=%d", SCpnt->SCp.this_residual);
                                 continue;
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index 18b6c55cd08..8b7db1e53c1 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -339,7 +339,7 @@ update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
 
 /**
  * bar4_shift - function is called to shift BAR base address
- * @pm8001_ha : our hba card infomation
+ * @pm8001_ha : our hba card information
  * @shiftValue : shifting value in memory bar.
  */
 static int bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
index 833a5201eda..909132041c0 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.h
+++ b/drivers/scsi/pm8001/pm8001_hwi.h
@@ -209,7 +209,7 @@ struct  pio_setup_fis {
 
 /*
  * brief the data structure of SATA Completion Response
- * use to discribe the sata task response (64 bytes)
+ * use to describe the sata task response (64 bytes)
  */
 struct sata_completion_resp {
         __le32  tag;
@@ -951,7 +951,7 @@ struct set_dev_state_resp {
 #define PCIE_EVENT_INTERRUPT            0x003044
 #define PCIE_ERROR_INTERRUPT_ENABLE     0x003048
 #define PCIE_ERROR_INTERRUPT            0x00304C
-/* signature defintion for host scratch pad0 register */
+/* signature definition for host scratch pad0 register */
 #define SPC_SOFT_RESET_SIGNATURE        0x252acbcd
 /* Signature for Soft Reset */
 
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index bdb6b27dedd..aa05e661d11 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -445,7 +445,7 @@ struct fw_control_info {
 struct fw_control_ex {
         struct fw_control_info *fw_control;
         void                    *buffer;/* keep buffer pointer to be
-        freed when the responce comes*/
+        freed when the response comes*/
         void                    *virtAddr;/* keep virtual address of the data */
         void                    *usrAddr;/* keep virtual address of the
         user data */
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index bcf858e88c6..96d5ad0c1e4 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -213,7 +213,7 @@ static int pmcraid_slave_alloc(struct scsi_device *scsi_dev)
  * pmcraid_slave_configure - Configures a SCSI device
  * @scsi_dev: scsi device struct
  *
- * This fucntion is executed by SCSI mid layer just after a device is first
+ * This function is executed by SCSI mid layer just after a device is first
  * scanned (i.e. it has responded to an INQUIRY). For VSET resources, the
  * timeout value (default 30s) will be over-written to a higher value (60s)
  * and max_sectors value will be over-written to 512. It also sets queue depth
@@ -2122,7 +2122,7 @@ static void pmcraid_fail_outstanding_cmds(struct pmcraid_instance *pinstance)
  *
  * This function executes most of the steps required for IOA reset. This gets
  * called by user threads (modprobe/insmod/rmmod) timer, tasklet and midlayer's
- * 'eh_' thread. Access to variables used for controling the reset sequence is
+ * 'eh_' thread. Access to variables used for controlling the reset sequence is
  * synchronized using host lock. Various functions called during reset process
  * would make use of a single command block, pointer to which is also stored in
  * adapter instance structure.
@@ -2994,7 +2994,7 @@ static int pmcraid_abort_complete(struct pmcraid_cmd *cancel_cmd)
 
         /* If the abort task is not timed out we will get a Good completion
          * as sense_key, otherwise we may get one the following responses
-         * due to subsquent bus reset or device reset. In case IOASC is
+         * due to subsequent bus reset or device reset. In case IOASC is
          * NR_SYNC_REQUIRED, set sync_reqd flag for the corresponding resource
          */
         if (ioasc == PMCRAID_IOASC_UA_BUS_WAS_RESET ||
@@ -3933,7 +3933,7 @@ static long pmcraid_ioctl_passthrough(
 
                         /* if abort task couldn't find the command i.e it got
                          * completed prior to aborting, return good completion.
-                         * if command got aborted succesfully or there was IOA
+                         * if command got aborted successfully or there was IOA
                          * reset due to abort task itself getting timedout then
                          * return -ETIMEDOUT
                          */
@@ -5932,7 +5932,7 @@ static int __devinit pmcraid_probe(
          * However, firmware supports 64-bit streaming DMA buffers, whereas
          * coherent buffers are to be 32-bit. Since pci_alloc_consistent always
          * returns memory within 4GB (if not, change this logic), coherent
-         * buffers are within firmware acceptible address ranges.
+         * buffers are within firmware acceptable address ranges.
          */
         if ((sizeof(dma_addr_t) == 4) ||
             pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 4db210d9394..34e4c915002 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -1024,7 +1024,7 @@ static struct pmcraid_ioasc_error pmcraid_ioasc_error_table[] = {
 
 
 /*
- * pmcraid_ioctl_header - definition of header structure that preceeds all the
+ * pmcraid_ioctl_header - definition of header structure that precedes all the
  * buffers given as ioctl arguments.
  *
  * .signature           : always ASCII string, "PMCRAID"
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 5dec684bf01..8ba5744c267 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -78,7 +78,7 @@
         - Clean up vchan handling
     Rev  3.23.33 July 3, 2003, Jes Sorensen
         - Don't define register access macros before define determining MMIO.
-          This just happend to work out on ia64 but not elsewhere.
+          This just happened to work out on ia64 but not elsewhere.
         - Don't try and read from the card while it is in reset as
           it won't respond and causes an MCA
     Rev  3.23.32 June 23, 2003, Jes Sorensen
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 6c51c0a35b9..ee20353c855 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2086,7 +2086,7 @@ struct ct_sns_pkt {
 };
 
 /*
- * SNS command structures -- for 2200 compatability.
+ * SNS command structures -- for 2200 compatibility.
  */
 #define RFT_ID_SNS_SCMD_LEN     22
 #define RFT_ID_SNS_CMD_SIZE     60
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 631fefc8482..f5ba09c8a66 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -539,7 +539,7 @@ struct sts_entry_24xx {
          * If DIF Error is set in comp_status, these additional fields are
          * defined:
          * &data[10] : uint8_t report_runt_bg[2];       - computed guard
-         * &data[12] : uint8_t actual_dif[8];           - DIF Data recieved
+         * &data[12] : uint8_t actual_dif[8];           - DIF Data received
          * &data[20] : uint8_t expected_dif[8];         - DIF Data computed
         */
 };
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d17ed9a94a0..712518d0512 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -414,7 +414,7 @@ skip_rio:
                                     "marked OFFLINE!\n");
                                 vha->flags.online = 0;
                         } else {
-                                /* Check to see if MPI timeout occured */
+                                /* Check to see if MPI timeout occurred */
                                 if ((mbx & MBX_3) && (ha->flags.port0))
                                         set_bit(MPI_RESET_NEEDED,
                                             &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7a7c0ecfe7d..34893397ac8 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -303,7 +303,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
                             !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
 
                                 qla_printk(KERN_WARNING, ha,
-                                    "Mailbox command timeout occured. "
+                                    "Mailbox command timeout occurred. "
                                     "Scheduling ISP " "abort. eeh_busy: 0x%x\n",
                                     ha->flags.eeh_busy);
                                 set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
@@ -321,7 +321,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
                             !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
 
                                 qla_printk(KERN_WARNING, ha,
-                                    "Mailbox command timeout occured. "
+                                    "Mailbox command timeout occurred. "
                                     "Issuing ISP abort.\n");
 
                                 set_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
@@ -3789,7 +3789,7 @@ qla2x00_loopback_test(scsi_qla_host_t *vha, struct msg_echo_lb *mreq,
         mcp->mb[20] = LSW(MSD(mreq->send_dma));
         mcp->mb[21] = MSW(MSD(mreq->send_dma));
 
-        /* recieve data address */
+        /* receive data address */
         mcp->mb[16] = LSW(mreq->rcv_dma);
         mcp->mb[17] = MSW(mreq->rcv_dma);
         mcp->mb[6] = LSW(MSD(mreq->rcv_dma));
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 76ec876e6b2..455fe134d31 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2598,7 +2598,7 @@ qla82xx_calc_dsd_lists(uint16_t dsds)
  * qla82xx_start_scsi() - Send a SCSI command to the ISP
  * @sp: command to send to the ISP
  *
- * Returns non-zero if a failure occured, else zero.
+ * Returns non-zero if a failure occurred, else zero.
  */
 int
 qla82xx_start_scsi(srb_t *sp)
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 75a966c9486..aa774752916 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1046,7 +1046,7 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 
 eh_bus_reset_done:
         qla_printk(KERN_INFO, vha->hw, "%s: reset %s\n", __func__,
-            (ret == FAILED) ? "failed" : "succeded");
+            (ret == FAILED) ? "failed" : "succeeded");
 
         return ret;
 }
@@ -1136,7 +1136,7 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 
 eh_host_reset_lock:
         qla_printk(KERN_INFO, ha, "%s: reset %s\n", __func__,
-            (ret == FAILED) ? "failed" : "succeded");
+            (ret == FAILED) ? "failed" : "succeeded");
 
         return ret;
 }
@@ -3902,7 +3902,7 @@ uint32_t qla82xx_error_recovery(scsi_qla_host_t *base_vha)
                         continue;
                 if (atomic_read(&other_pdev->enable_cnt)) {
                         DEBUG17(qla_printk(KERN_INFO, ha,
-                            "Found PCI func availabe and enabled at 0x%x\n",
+                            "Found PCI func available and enabled at 0x%x\n",
                             fn));
                         pci_dev_put(other_pdev);
                         break;
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h
index c1f8d1b150f..4757878d59d 100644
--- a/drivers/scsi/qla4xxx/ql4_def.h
+++ b/drivers/scsi/qla4xxx/ql4_def.h
@@ -182,7 +182,7 @@ struct srb {
         uint16_t flags;         /* (1) Status flags. */
 
 #define SRB_DMA_VALID           BIT_3   /* DMA Buffer mapped. */
-#define SRB_GOT_SENSE           BIT_4   /* sense data recieved. */
+#define SRB_GOT_SENSE           BIT_4   /* sense data received. */
         uint8_t state;          /* (1) Status flags. */
 
 #define SRB_NO_QUEUE_STATE       0      /* Request is in between states */
diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c
index bbb2e903d38..48e2241ddaf 100644
--- a/drivers/scsi/qla4xxx/ql4_init.c
+++ b/drivers/scsi/qla4xxx/ql4_init.c
@@ -1338,7 +1338,7 @@ exit_init_hba:
         }
 
         DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,
-            status == QLA_ERROR ? "FAILED" : "SUCCEDED"));
+            status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
         return status;
 }
 
diff --git a/drivers/scsi/qla4xxx/ql4_nvram.h b/drivers/scsi/qla4xxx/ql4_nvram.h
index b3831bd2947..945cc328f57 100644
--- a/drivers/scsi/qla4xxx/ql4_nvram.h
+++ b/drivers/scsi/qla4xxx/ql4_nvram.h
@@ -28,7 +28,7 @@
 #define  FM93C56A_ERASE       0x3
 #define  FM93C56A_ERASE_ALL   0x0
 
-/* Command Extentions */
+/* Command Extensions */
 #define  FM93C56A_WEN_EXT        0x3
 #define  FM93C56A_WRITE_ALL_EXT  0x1
 #define  FM93C56A_WDS_EXT        0x0
diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c
index a4acb0dd7be..230ba097d28 100644
--- a/drivers/scsi/qla4xxx/ql4_os.c
+++ b/drivers/scsi/qla4xxx/ql4_os.c
@@ -1213,7 +1213,7 @@ recover_ha_init_adapter:
 
         clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags);
         DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no,
-            status == QLA_ERROR ? "FAILED" : "SUCCEDED"));
+            status == QLA_ERROR ? "FAILED" : "SUCCEEDED"));
 
         return status;
 }
@@ -2110,7 +2110,7 @@ static int qla4xxx_eh_abort(struct scsi_cmnd *cmd)
 
         ql4_printk(KERN_INFO, ha,
             "scsi%ld:%d:%d: Abort command - %s\n",
-            ha->host_no, id, lun, (ret == SUCCESS) ? "succeded" : "failed");
+            ha->host_no, id, lun, (ret == SUCCESS) ? "succeeded" : "failed");
 
         return ret;
 }
@@ -2278,7 +2278,7 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd)
                 return_status = SUCCESS;
 
         ql4_printk(KERN_INFO, ha, "HOST RESET %s.\n",
-                   return_status == FAILED ? "FAILED" : "SUCCEDED");
+                   return_status == FAILED ? "FAILED" : "SUCCEEDED");
 
         return return_status;
 }
@@ -2492,7 +2492,7 @@ qla4xxx_pci_slot_reset(struct pci_dev *pdev)
         /* Initialize device or resume if in suspended state */
         rc = pci_enable_device(pdev);
         if (rc) {
-                ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cant re-enable "
+                ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Can't re-enable "
                     "device after reset\n", ha->host_no, __func__);
                 goto exit_slot_reset;
         }
diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c
index fa5758cbded..6888b2ca5bf 100644
--- a/drivers/scsi/scsi_debug.c
+++ b/drivers/scsi/scsi_debug.c
@@ -2454,7 +2454,7 @@ static void scsi_debug_slave_destroy(struct scsi_device *sdp)
                 printk(KERN_INFO "scsi_debug: slave_destroy <%u %u %u %u>\n",
                        sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
         if (devip) {
-                /* make this slot avaliable for re-use */
+                /* make this slot available for re-use */
                 devip->used = 0;
                 sdp->hostdata = NULL;
         }
diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c
index a2ed201885a..26a8a45584e 100644
--- a/drivers/scsi/scsi_netlink.c
+++ b/drivers/scsi/scsi_netlink.c
@@ -499,7 +499,7 @@ scsi_netlink_init(void)
                                 SCSI_NL_GRP_CNT, scsi_nl_rcv_msg, NULL,
                                 THIS_MODULE);
         if (!scsi_nl_sock) {
-                printk(KERN_ERR "%s: register of recieve handler failed\n",
+                printk(KERN_ERR "%s: register of receive handler failed\n",
                                 __func__);
                 netlink_unregister_notifier(&scsi_netlink_notifier);
                 return;
diff --git a/drivers/scsi/scsi_tgt_lib.c b/drivers/scsi/scsi_tgt_lib.c
index f67282058ba..8bca8c25ba6 100644
--- a/drivers/scsi/scsi_tgt_lib.c
+++ b/drivers/scsi/scsi_tgt_lib.c
@@ -93,7 +93,7 @@ struct scsi_cmnd *scsi_host_get_command(struct Scsi_Host *shost,
 
         /*
          * The blk helpers are used to the READ/WRITE requests
-         * transfering data from a initiator point of view. Since
+         * transferring data from a initiator point of view. Since
          * we are in target mode we want the opposite.
          */
         rq = blk_get_request(shost->uspace_req_q, !write, gfp_mask);
diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c
index 2941d2d92c9..fdf3fa63905 100644
--- a/drivers/scsi/scsi_transport_fc.c
+++ b/drivers/scsi/scsi_transport_fc.c
@@ -2378,7 +2378,7 @@ fc_flush_devloss(struct Scsi_Host *shost)
  * fc_remove_host - called to terminate any fc_transport-related elements for a scsi host.
  * @shost:      Which &Scsi_Host
  *
- * This routine is expected to be called immediately preceeding the
+ * This routine is expected to be called immediately preceding the
  * a driver's call to scsi_remove_host().
  *
  * WARNING: A driver utilizing the fc_transport, which fails to call
@@ -2458,7 +2458,7 @@ static void fc_terminate_rport_io(struct fc_rport *rport)
 }
 
 /**
- * fc_starget_delete - called to delete the scsi decendents of an rport
+ * fc_starget_delete - called to delete the scsi descendants of an rport
  * @work:       remote port to be operated on.
  *
  * Deletes target and all sdevs.
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index b61ebec6bca..bd0806e64e8 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1055,7 +1055,7 @@ static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
  *      @arg: this is third argument given to ioctl(2) system call.
  *      Often contains a pointer.
  *
- *      Returns 0 if successful (some ioctls return postive numbers on
+ *      Returns 0 if successful (some ioctls return positive numbers on
  *      success as well). Returns a negated errno value in case of error.
  *
  *      Note: most ioctls are forward onto the block subsystem or further
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index aefadc6a160..95019c747cc 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -567,7 +567,7 @@ static const struct block_device_operations sr_bdops =
         .revalidate_disk = sr_block_revalidate_disk,
         /* 
          * No compat_ioctl for now because sr_block_ioctl never
-         * seems to pass arbitary ioctls down to host drivers.
+         * seems to pass arbitrary ioctls down to host drivers.
          */
 };
 
diff --git a/drivers/scsi/sun3_NCR5380.c b/drivers/scsi/sun3_NCR5380.c
index 4f0e5485ffd..07eaef1c722 100644
--- a/drivers/scsi/sun3_NCR5380.c
+++ b/drivers/scsi/sun3_NCR5380.c
@@ -467,7 +467,7 @@ static void free_all_tags( void )
  *
  * Parameters: struct scsi_cmnd *cmd
  *    The command to work on. The first scatter buffer's data are
- *    assumed to be already transfered into ptr/this_residual.
+ *    assumed to be already transferred into ptr/this_residual.
  */
 
 static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
@@ -1717,7 +1717,7 @@ static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd,
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes are transfered or exit
+ *      maximum number of bytes, 0 if all bytes are transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
@@ -1904,7 +1904,7 @@ static int do_abort (struct Scsi_Host *host)
  *      bytes to transfer, **data - pointer to data pointer.
  * 
  * Returns : -1 when different phase is entered without transferring
- *      maximum number of bytes, 0 if all bytes or transfered or exit
+ *      maximum number of bytes, 0 if all bytes or transferred or exit
  *      is in same phase.
  *
  *      Also, *phase, *count, *data are modified in place.
diff --git a/drivers/scsi/sym53c416.c b/drivers/scsi/sym53c416.c
index 190107ae120..012c86edd59 100644
--- a/drivers/scsi/sym53c416.c
+++ b/drivers/scsi/sym53c416.c
@@ -774,7 +774,7 @@ static int sym53c416_host_reset(Scsi_Cmnd *SCpnt)
 
         /* printk("sym53c416_reset\n"); */
         base = SCpnt->device->host->io_port;
-        /* search scsi_id - fixme, we shouldnt need to iterate for this! */
+        /* search scsi_id - fixme, we shouldn't need to iterate for this! */
         for(i = 0; i < host_index && scsi_id == -1; i++)
                 if(hosts[i].base == base)
                         scsi_id = hosts[i].scsi_id;
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw1.h b/drivers/scsi/sym53c8xx_2/sym_fw1.h
index 7b08d6caaa9..63952ee300b 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw1.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw1.h
@@ -1449,7 +1449,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = {
                 PADDR_B (msg_weird_seen),
         /*
          *  We donnot handle extended messages from SCRIPTS.
-         *  Read the amount of data correponding to the 
+         *  Read the amount of data corresponding to the 
          *  message length and call the C code.
          */
         SCR_COPY (1),
diff --git a/drivers/scsi/sym53c8xx_2/sym_fw2.h b/drivers/scsi/sym53c8xx_2/sym_fw2.h
index ae1fb179b88..c87d72443a1 100644
--- a/drivers/scsi/sym53c8xx_2/sym_fw2.h
+++ b/drivers/scsi/sym53c8xx_2/sym_fw2.h
@@ -1326,7 +1326,7 @@ static struct SYM_FWB_SCR SYM_FWB_SCR = {
                 PADDR_B (msg_weird_seen),
         /*
          *  We donnot handle extended messages from SCRIPTS.
-         *  Read the amount of data correponding to the 
+         *  Read the amount of data corresponding to the 
          *  message length and call the C code.
          */
         SCR_STORE_REL (scratcha, 1),
diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c
index 2c3e89ddf06..d92fe4037e9 100644
--- a/drivers/scsi/sym53c8xx_2/sym_hipd.c
+++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c
@@ -2457,7 +2457,7 @@ static void sym_int_ma (struct sym_hcb *np)
                 }
 
                 /*
-                 *  The data in the dma fifo has not been transfered to
+                 *  The data in the dma fifo has not been transferred to
                  *  the target -> add the amount to the rest
                  *  and clear the data.
                  *  Check the sstat2 register in case of wide transfer.
@@ -5094,7 +5094,7 @@ fail:
 }
 
 /*
- *  Lun control block deallocation. Returns the number of valid remaing LCBs
+ *  Lun control block deallocation. Returns the number of valid remaining LCBs
  *  for the target.
  */
 int sym_free_lcb(struct sym_hcb *np, u_char tn, u_char ln)
diff --git a/drivers/scsi/sym53c8xx_2/sym_malloc.c b/drivers/scsi/sym53c8xx_2/sym_malloc.c
index 883cac10daf..6f9af0de7ec 100644
--- a/drivers/scsi/sym53c8xx_2/sym_malloc.c
+++ b/drivers/scsi/sym53c8xx_2/sym_malloc.c
@@ -50,7 +50,7 @@
  *  from the SCRIPTS code. In addition, cache line alignment 
  *  is guaranteed for power of 2 cache line size.
  *
- *  This allocator has been developped for the Linux sym53c8xx  
+ *  This allocator has been developed for the Linux sym53c8xx  
  *  driver, since this O/S does not provide naturally aligned 
  *  allocations.
  *  It has the advantage of allowing the driver to use private 
diff --git a/drivers/scsi/wd33c93.c b/drivers/scsi/wd33c93.c
index 5f697e0bd00..4468ae3610f 100644
--- a/drivers/scsi/wd33c93.c
+++ b/drivers/scsi/wd33c93.c
@@ -1843,7 +1843,7 @@ check_setup_args(char *key, int *flags, int *val, char *buf)
  *
  * The original driver used to rely on a fixed sx_table, containing periods
  * for (only) the lower limits of the respective input-clock-frequency ranges
- * (8-10/12-15/16-20 MHz). Although it seems, that no problems ocurred with
+ * (8-10/12-15/16-20 MHz). Although it seems, that no problems occurred with
  * this setting so far, it might be desirable to adjust the transfer periods
  * closer to the really attached, possibly 25% higher, input-clock, since
  * - the wd33c93 may really use a significant shorter period, than it has
diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c
index db451ae0a36..9ee0afef2d1 100644
--- a/drivers/scsi/wd7000.c
+++ b/drivers/scsi/wd7000.c
@@ -837,7 +837,7 @@ static inline Scb *alloc_scbs(struct Scsi_Host *host, int needed)
                 }
         }
 
-        /* Take the lock, then check we didnt get beaten, if so try again */
+        /* Take the lock, then check we didn't get beaten, if so try again */
         spin_lock_irqsave(&scbpool_lock, flags);
         if (freescbs < needed) {
                 spin_unlock_irqrestore(&scbpool_lock, flags);
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index 04113e5304a..1e824fb1649 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -515,7 +515,7 @@ void __init sfi_init_late(void)
 }
 
 /*
- * The reason we put it here becasue we need wait till the /sys/firmware
+ * The reason we put it here because we need wait till the /sys/firmware
  * is setup, then our interface can be registered in /sys/firmware/sfi
  */
 core_initcall(sfi_sysfs_init);
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index 5a4e0afb9ad..5825370bad2 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -661,7 +661,7 @@ static void readwriter(struct pl022 *pl022)
 {
 
         /*
-         * The FIFO depth is different inbetween primecell variants.
+         * The FIFO depth is different between primecell variants.
          * I believe filling in too much in the FIFO might cause
          * errons in 8bit wide transfers on ARM variants (just 8 words
          * FIFO, means only 8x8 = 64 bits in FIFO) at least.
@@ -722,7 +722,7 @@ static void readwriter(struct pl022 *pl022)
                  * This inner reader takes care of things appearing in the RX
                  * FIFO as we're transmitting. This will happen a lot since the
                  * clock starts running when you put things into the TX FIFO,
-                 * and then things are continously clocked into the RX FIFO.
+                 * and then things are continuously clocked into the RX FIFO.
                  */
                 while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
                        && (pl022->rx < pl022->rx_end)) {
@@ -842,7 +842,7 @@ static void dma_callback(void *data)
 
         unmap_free_dma_scatter(pl022);
 
-        /* Update total bytes transfered */
+        /* Update total bytes transferred */
         msg->actual_length += pl022->cur_transfer->len;
         if (pl022->cur_transfer->cs_change)
                 pl022->cur_chip->
@@ -1224,7 +1224,7 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
                                  "number of bytes on a 16bit bus?)\n",
                                  (u32) (pl022->rx - pl022->rx_end));
                 }
-                /* Update total bytes transfered */
+                /* Update total bytes transferred */
                 msg->actual_length += pl022->cur_transfer->len;
                 if (pl022->cur_transfer->cs_change)
                         pl022->cur_chip->
@@ -1415,11 +1415,11 @@ static void do_polling_transfer(struct pl022 *pl022)
                        SSP_CR1(pl022->virtbase));
 
                 dev_dbg(&pl022->adev->dev, "polling transfer ongoing ...\n");
-                /* FIXME: insert a timeout so we don't hang here indefinately */
+                /* FIXME: insert a timeout so we don't hang here indefinitely */
                 while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
                         readwriter(pl022);
 
-                /* Update total byte transfered */
+                /* Update total byte transferred */
                 message->actual_length += pl022->cur_transfer->len;
                 if (pl022->cur_transfer->cs_change)
                         pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
@@ -2129,7 +2129,7 @@ pl022_probe(struct amba_device *adev, const struct amba_id *id)
                         "probe - problem registering spi master\n");
                 goto err_spi_register;
         }
-        dev_dbg(dev, "probe succeded\n");
+        dev_dbg(dev, "probe succeeded\n");
         /*
          * Disable the silicon block pclk and any voltage domain and just
          * power it up and clock it when it's needed
@@ -2184,7 +2184,7 @@ pl022_remove(struct amba_device *adev)
         spi_unregister_master(pl022->master);
         spi_master_put(pl022->master);
         amba_set_drvdata(adev, NULL);
-        dev_dbg(&adev->dev, "remove succeded\n");
+        dev_dbg(&adev->dev, "remove succeeded\n");
         return 0;
 }
 
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 3c9ade69643..b50563d320e 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -480,7 +480,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct au1550_spi *hw)
                 au1xxx_dbdma_stop(hw->dma_rx_ch);
                 au1xxx_dbdma_stop(hw->dma_tx_ch);
 
-                /* get number of transfered bytes */
+                /* get number of transferred bytes */
                 hw->rx_count = hw->len - au1xxx_get_dma_residue(hw->dma_rx_ch);
                 hw->tx_count = hw->len - au1xxx_get_dma_residue(hw->dma_tx_ch);
 
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index 9a6196461b2..b1a4b9f503a 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -345,7 +345,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
 
 void dw_spi_xfer_done(struct dw_spi *dws)
 {
-        /* Update total byte transfered return count actual bytes read */
+        /* Update total byte transferred return count actual bytes read */
         dws->cur_msg->actual_length += dws->len;
 
         /* Move to next transfer */
diff --git a/drivers/spi/dw_spi.h b/drivers/spi/dw_spi.h
index fb0bce56484..b23e452adaf 100644
--- a/drivers/spi/dw_spi.h
+++ b/drivers/spi/dw_spi.h
@@ -46,7 +46,7 @@
 #define SPI_INT_RXFI                    (1 << 4)
 #define SPI_INT_MSTI                    (1 << 5)
 
-/* TX RX interrupt level threshhold, max can be 256 */
+/* TX RX interrupt level threshold, max can be 256 */
 #define SPI_INT_THRESHOLD               32
 
 enum dw_ssi_type {
diff --git a/drivers/spi/ep93xx_spi.c b/drivers/spi/ep93xx_spi.c
index 0ba35df9a6d..d3570071e98 100644
--- a/drivers/spi/ep93xx_spi.c
+++ b/drivers/spi/ep93xx_spi.c
@@ -512,7 +512,7 @@ static int ep93xx_spi_read_write(struct ep93xx_spi *espi)
  *
  * This function processes one SPI transfer given in @t. Function waits until
  * transfer is complete (may sleep) and updates @msg->status based on whether
- * transfer was succesfully processed or not.
+ * transfer was successfully processed or not.
  */
 static void ep93xx_spi_process_transfer(struct ep93xx_spi *espi,
                                         struct spi_message *msg,
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index a429b01d028..9c74aad6be9 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -700,7 +700,7 @@ static void int_transfer_complete(struct driver_data *drv_data)
         if (!pxa25x_ssp_comp(drv_data))
                 write_SSTO(0, reg);
 
-        /* Update total byte transfered return count actual bytes read */
+        /* Update total byte transferred return count actual bytes read */
         drv_data->cur_msg->actual_length += drv_data->len -
                                 (drv_data->rx_end - drv_data->rx);
 
@@ -759,7 +759,7 @@ static irqreturn_t interrupt_transfer(struct driver_data *drv_data)
 
                 /*
                  * PXA25x_SSP has no timeout, set up rx threshould for the
-                 * remaing RX bytes.
+                 * remaining RX bytes.
                  */
                 if (pxa25x_ssp_comp(drv_data)) {
 
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 34bb17f0301..82b9a428c32 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -957,7 +957,7 @@ EXPORT_SYMBOL_GPL(spi_sync);
  * drivers may DMA directly into and out of the message buffers.
  *
  * This call should be used by drivers that require exclusive access to the
- * SPI bus. It has to be preceeded by a spi_bus_lock call. The SPI bus must
+ * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
  * be released by a spi_bus_unlock call when the exclusive access is over.
  *
  * It returns zero on success, else a negative error code.
diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
index a28462486df..bdb7289a1d2 100644
--- a/drivers/spi/spi_bfin5xx.c
+++ b/drivers/spi/spi_bfin5xx.c
@@ -905,7 +905,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
                         "IO write error!\n");
                 message->state = ERROR_STATE;
         } else {
-                /* Update total byte transfered */
+                /* Update total byte transferred */
                 message->actual_length += drv_data->len_in_bytes;
                 /* Move to next transfer of this msg */
                 message->state = bfin_spi_next_transfer(drv_data);
diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c
index 900e921ab80..496f895a002 100644
--- a/drivers/spi/spi_fsl_espi.c
+++ b/drivers/spi/spi_fsl_espi.c
@@ -474,7 +474,7 @@ static int fsl_espi_setup(struct spi_device *spi)
         mpc8xxx_spi = spi_master_get_devdata(spi->master);
         reg_base = mpc8xxx_spi->reg_base;
 
-        hw_mode = cs->hw_mode; /* Save orginal settings */
+        hw_mode = cs->hw_mode; /* Save original settings */
         cs->hw_mode = mpc8xxx_spi_read_reg(
                         &reg_base->csmode[spi->chip_select]);
         /* mask out bits we are going to set */
diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c
index a467b20baac..6f34963b3c6 100644
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -670,7 +670,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
                 ssb_printk(KERN_ERR PFX "No SPROM available!\n");
                 return -ENODEV;
         }
-        if (bus->chipco.dev) {  /* can be unavailible! */
+        if (bus->chipco.dev) {  /* can be unavailable! */
                 /*
                  * get SPROM offset: SSB_SPROM_BASE1 except for
                  * chipcommon rev >= 31 or chip ID is 0x4312 and
diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c
index 4f7cc8d1327..5f34d7a3e3a 100644
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -185,7 +185,7 @@ bool ssb_is_sprom_available(struct ssb_bus *bus)
         /* this routine differs from specs as we do not access SPROM directly
            on PCMCIA */
         if (bus->bustype == SSB_BUSTYPE_PCI &&
-            bus->chipco.dev &&  /* can be unavailible! */
+            bus->chipco.dev &&  /* can be unavailable! */
             bus->chipco.dev->id.revision >= 31)
                 return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM;
 
diff --git a/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c b/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c
index c6488e0d130..41223f95358 100644
--- a/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c
+++ b/drivers/staging/ath6kl/htc2/AR6000/ar6k_gmbox_hciuart.c
@@ -237,7 +237,7 @@ static int CreditsAvailableCallback(void *pContext, int Credits, bool CreditIRQE
                          pProt->CreditsCurrentSeek));
         
         if (pProt->CreditsAvailable >= pProt->CreditsCurrentSeek) {
-                /* we have enough credits to fullfill at least 1 packet waiting in the queue */
+                /* we have enough credits to fulfill at least 1 packet waiting in the queue */
             pProt->CreditsCurrentSeek = 0;
             pProt->SendStateFlags &= ~HCI_SEND_WAIT_CREDITS;  
             doPendingSends = true;
@@ -285,7 +285,7 @@ static void FailureCallback(void *pContext, int Status)
 {
     struct gmbox_proto_hci_uart  *pProt = (struct gmbox_proto_hci_uart *)pContext; 
     
-        /* target assertion occured */           
+        /* target assertion occurred */           
     NotifyTransportFailure(pProt, Status);  
 }
 
@@ -507,7 +507,7 @@ static int HCIUartMessagePending(void *pContext, u8 LookAheadBytes[], int ValidB
         
     } while (false);
         
-        /* check if we need to disable the reciever */
+        /* check if we need to disable the receiver */
     if (status || blockRecv) {
         DevGMboxIRQAction(pProt->pDev, GMBOX_RECV_IRQ_DISABLE, PROC_IO_SYNC); 
     }
diff --git a/drivers/staging/ath6kl/include/aggr_recv_api.h b/drivers/staging/ath6kl/include/aggr_recv_api.h
index 67a058492c4..5ead58d5feb 100644
--- a/drivers/staging/ath6kl/include/aggr_recv_api.h
+++ b/drivers/staging/ath6kl/include/aggr_recv_api.h
@@ -72,7 +72,7 @@ aggr_process_bar(void *cntxt, u8 tid, u16 seq_no);
  * This event is to initiate/modify the receive side window.
  * Target will send WMI_ADDBA_REQ_EVENTID event to host - to setup 
  * recv re-ordering queues. Target will negotiate ADDBA with peer, 
- * and indicate via this event after succesfully completing the 
+ * and indicate via this event after successfully completing the 
  * negotiation. This happens in two situations:
  *  1. Initial setup of aggregation
  *  2. Renegotiation of current recv window.
diff --git a/drivers/staging/ath6kl/include/common/a_hci.h b/drivers/staging/ath6kl/include/common/a_hci.h
index 08cb013090b..379d65224e3 100644
--- a/drivers/staging/ath6kl/include/common/a_hci.h
+++ b/drivers/staging/ath6kl/include/common/a_hci.h
@@ -124,7 +124,7 @@
 #define PAL_NUM_COMPL_DATA_BLOCK_EVENT              0x48
 #define PAL_SHORT_RANGE_MODE_CHANGE_COMPL_EVENT     0x4C
 #define PAL_AMP_STATUS_CHANGE_EVENT                 0x4D
-/*======== End of PAL events definiton =================*/
+/*======== End of PAL events definition =================*/
 
 
 /*======== Timeouts (not part of HCI cmd, but input to PAL engine) =========*/
@@ -430,7 +430,7 @@ typedef struct  hci_event_hw_err_t {
     u8 hw_err_code;
 } POSTPACK HCI_EVENT_HW_ERR;
 
-/* Flush occured event */
+/* Flush occurred event */
 /* Qos Violation event */
 typedef struct  hci_event_handle_t {
     u8 event_code;
diff --git a/drivers/staging/ath6kl/include/common/dbglog.h b/drivers/staging/ath6kl/include/common/dbglog.h
index 3a3d00da0b8..b7a123086cc 100644
--- a/drivers/staging/ath6kl/include/common/dbglog.h
+++ b/drivers/staging/ath6kl/include/common/dbglog.h
@@ -44,7 +44,7 @@ extern "C" {
 #define DBGLOG_MODULEID_NUM_MAX          16 /* Upper limit is width of mask */
 
 /*
- * Please ensure that the definition of any new module intrduced is captured
+ * Please ensure that the definition of any new module introduced is captured
  * between the DBGLOG_MODULEID_START and DBGLOG_MODULEID_END defines. The 
  * structure is required for the parser to correctly pick up the values for
  * different modules.
diff --git a/drivers/staging/ath6kl/include/common/epping_test.h b/drivers/staging/ath6kl/include/common/epping_test.h
index 5c40d8a2229..7027fac8f37 100644
--- a/drivers/staging/ath6kl/include/common/epping_test.h
+++ b/drivers/staging/ath6kl/include/common/epping_test.h
@@ -92,7 +92,7 @@ typedef PREPACK struct {
 #define EPPING_CMD_RESET_RECV_CNT       2   /* reset recv count */
 #define EPPING_CMD_CAPTURE_RECV_CNT     3   /* fetch recv count, 4-byte count returned in CmdBuffer_t */
 #define EPPING_CMD_NO_ECHO              4   /* non-echo packet test (tx-only) */
-#define EPPING_CMD_CONT_RX_START        5   /* continous RX packets, parameters are in CmdBuffer_h */
+#define EPPING_CMD_CONT_RX_START        5   /* continuous RX packets, parameters are in CmdBuffer_h */
 #define EPPING_CMD_CONT_RX_STOP         6   /* stop continuous RX packet transmission */
 
     /* test command parameters may be no more than 8 bytes */
diff --git a/drivers/staging/ath6kl/include/common/ini_dset.h b/drivers/staging/ath6kl/include/common/ini_dset.h
index 8bfc75940c8..a9e05fa0f65 100644
--- a/drivers/staging/ath6kl/include/common/ini_dset.h
+++ b/drivers/staging/ath6kl/include/common/ini_dset.h
@@ -31,7 +31,7 @@
  */
 typedef enum {
 #if defined(AR6002_REV4) || defined(AR6003)
-/* Add these definitions for compatability  */
+/* Add these definitions for compatibility  */
 #define WHAL_INI_DATA_ID_BB_RFGAIN_LNA1 WHAL_INI_DATA_ID_BB_RFGAIN
 #define WHAL_INI_DATA_ID_BB_RFGAIN_LNA2 WHAL_INI_DATA_ID_BB_RFGAIN
     WHAL_INI_DATA_ID_NULL               =0,
diff --git a/drivers/staging/ath6kl/include/common/testcmd.h b/drivers/staging/ath6kl/include/common/testcmd.h
index 9ca1f2ac2cb..7d94aee508b 100644
--- a/drivers/staging/ath6kl/include/common/testcmd.h
+++ b/drivers/staging/ath6kl/include/common/testcmd.h
@@ -43,8 +43,8 @@ typedef enum {
     PN15_PATTERN
 }TX_DATA_PATTERN;
 
-/* Continous tx
-   mode : TCMD_CONT_TX_OFF - Disabling continous tx
+/* Continuous tx
+   mode : TCMD_CONT_TX_OFF - Disabling continuous tx
           TCMD_CONT_TX_SINE - Enable continuous unmodulated tx
           TCMD_CONT_TX_FRAME- Enable continuous modulated tx
    freq : Channel freq in Mhz. (e.g 2412 for channel 1 in 11 g)
diff --git a/drivers/staging/ath6kl/include/common/wmi.h b/drivers/staging/ath6kl/include/common/wmi.h
index c645af37344..4e634348536 100644
--- a/drivers/staging/ath6kl/include/common/wmi.h
+++ b/drivers/staging/ath6kl/include/common/wmi.h
@@ -1568,8 +1568,8 @@ typedef PREPACK struct {
                                    switch to ps-poll mode
                                   default = 3 */
 
-        u32 scoContStompMax;   /* max number of continous stomp allowed in opt mode.
-                                   if excedded switch to pspoll mode
+        u32 scoContStompMax;   /* max number of continuous stomp allowed in opt mode.
+                                   if exceeded switch to pspoll mode
                                     default = 3 */
 
         u32 scoMinlowRateMbps; /* Low rate threshold */
@@ -2084,7 +2084,7 @@ typedef PREPACK struct {
 /*
  * BSS INFO HDR version 2.0
  * With 6 bytes HTC header and 6 bytes of WMI header
- * WMI_BSS_INFO_HDR cannot be accomodated in the removed 802.11 management
+ * WMI_BSS_INFO_HDR cannot be accommodated in the removed 802.11 management
  * header space.
  * - Reduce the ieMask to 2 bytes as only two bit flags are used
  * - Remove rssi and compute it on the host. rssi = snr - 95
@@ -2911,7 +2911,7 @@ typedef PREPACK struct {
     u8 pktID; /* packet ID to identify parent packet */
     u8 rateIdx; /* rate index on successful transmission */
     u8 ackFailures; /* number of ACK failures in tx attempt */
-#if 0 /* optional params currently ommitted. */
+#if 0 /* optional params currently omitted. */
     u32 queueDelay; // usec delay measured Tx Start time - host delivery time
     u32 mediaDelay; // usec delay measured ACK rx time - host delivery time
 #endif
diff --git a/drivers/staging/ath6kl/include/common/wmix.h b/drivers/staging/ath6kl/include/common/wmix.h
index 5ebb8285d13..36acba66d49 100644
--- a/drivers/staging/ath6kl/include/common/wmix.h
+++ b/drivers/staging/ath6kl/include/common/wmix.h
@@ -191,7 +191,7 @@ typedef PREPACK struct {
 } POSTPACK WMIX_GPIO_INTR_ACK_CMD;
 
 /*
- * Target informs Host of GPIO interrupts that have ocurred since the
+ * Target informs Host of GPIO interrupts that have occurred since the
  * last WMIX_GIPO_INTR_ACK_CMD was received.  Additional information --
  * the current GPIO input values is provided -- in order to support
  * use of a GPIO interrupt as a Data Valid signal for other GPIO pins.
diff --git a/drivers/staging/ath6kl/include/htc_api.h b/drivers/staging/ath6kl/include/htc_api.h
index 1bc2488788a..4fb767559f8 100644
--- a/drivers/staging/ath6kl/include/htc_api.h
+++ b/drivers/staging/ath6kl/include/htc_api.h
@@ -209,7 +209,7 @@ struct htc_endpoint_credit_dist {
 typedef enum _HTC_CREDIT_DIST_REASON {
     HTC_CREDIT_DIST_SEND_COMPLETE = 0,     /* credits available as a result of completed
                                               send operations (MANDATORY) resulting in credit reports */
-    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occured (OPTIONAL) */
+    HTC_CREDIT_DIST_ACTIVITY_CHANGE = 1,   /* a change in endpoint activity occurred (OPTIONAL) */
     HTC_CREDIT_DIST_SEEK_CREDITS,          /* an endpoint needs to "seek" credits (OPTIONAL) */
     HTC_DUMP_CREDIT_STATE                  /* for debugging, dump any state information that is kept by
                                               the distribution function */
@@ -253,7 +253,7 @@ struct htc_endpoint_stats {
     u32 RxPacketsBundled;       /* count of recv packets received in a bundle */
     u32 RxBundleLookAheads;     /* count of number of bundled lookaheads */
     u32 RxBundleIndFromHdr;     /* count of the number of bundle indications from the HTC header */
-    u32 RxAllocThreshHit;       /* count of the number of times the recv allocation threshhold was hit */
+    u32 RxAllocThreshHit;       /* count of the number of times the recv allocation threshold was hit */
     u32 RxAllocThreshBytes;     /* total number of bytes */
 };
 
@@ -391,7 +391,7 @@ int    HTCSendPkt(HTC_HANDLE HTCHandle, struct htc_packet *pPacket);
 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
 void        HTCStop(HTC_HANDLE HTCHandle);
 /*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
-  @desc: Destory HTC service
+  @desc: Destroy HTC service
   @function name: HTCDestroy
   @input: HTCHandle 
   @output:
diff --git a/drivers/staging/ath6kl/miscdrv/credit_dist.c b/drivers/staging/ath6kl/miscdrv/credit_dist.c
index ae54e1f48e5..33fa0209026 100644
--- a/drivers/staging/ath6kl/miscdrv/credit_dist.c
+++ b/drivers/staging/ath6kl/miscdrv/credit_dist.c
@@ -341,7 +341,7 @@ static void SeekCredits(struct common_credit_state_info *pCredInfo,
         credits = min(pCredInfo->CurrentFreeCredits,pEPDist->TxCreditsSeek);
 
         if (credits >= pEPDist->TxCreditsSeek) {
-                /* we found some to fullfill the seek request */
+                /* we found some to fulfill the seek request */
             break;
         }
 
@@ -364,8 +364,8 @@ static void SeekCredits(struct common_credit_state_info *pCredInfo,
 
             if ((pCurEpDist->TxCreditsAssigned - need) >= pCurEpDist->TxCreditsMin) {
                     /* the current one has been allocated more than it's minimum and it
-                     * has enough credits assigned above it's minimum to fullfill our need
-                     * try to take away just enough to fullfill our need */
+                     * has enough credits assigned above it's minimum to fulfill our need
+                     * try to take away just enough to fulfill our need */
                 ReduceCredits(pCredInfo,
                               pCurEpDist,
                               pCurEpDist->TxCreditsAssigned - need);
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_android.c b/drivers/staging/ath6kl/os/linux/ar6000_android.c
index c96f6e9c99c..4aa75ee2cb1 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_android.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_android.c
@@ -372,7 +372,7 @@ void android_ar6k_check_wow_status(struct ar6_softc *ar, struct sk_buff *skb, bo
             }
         }
         if (needWake) {
-            /* keep host wake up if there is any event and packate comming in*/
+            /* keep host wake up if there is any event and packate coming in*/
             if (wowledon) {
                 char buf[32];
                 int len = sprintf(buf, "on");
diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
index 27cb02dfad3..97d6ce63b5c 100644
--- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c
+++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c
@@ -520,7 +520,7 @@ dbglog_parse_debug_logs(s8 *datap, u32 len)
 int
 ar6000_dbglog_get_debug_logs(struct ar6_softc *ar)
 {
-    u32 data[8]; /* Should be able to accomodate struct dbglog_buf_s */
+    u32 data[8]; /* Should be able to accommodate struct dbglog_buf_s */
     u32 address;
     u32 length;
     u32 dropped;
@@ -2063,7 +2063,7 @@ ar6000_stop_endpoint(struct net_device *dev, bool keepprofile, bool getdbglogs)
  * - In case of surprise removal, the hcd already frees up the pending
  *   for the device and hence there is no need to unregister the function
  *   driver inorder to get these requests. For planned removal, the function
- *   driver has to explictly unregister itself to have the hcd return all the
+ *   driver has to explicitly unregister itself to have the hcd return all the
  *   pending requests before the data structures for the devices are freed up.
  *   Note that as per the current implementation, the function driver will
  *   end up releasing all the devices since there is no API to selectively
@@ -2982,7 +2982,7 @@ ar6000_data_tx(struct sk_buff *skb, struct net_device *dev)
     /* If target is not associated */
     if( (!ar->arConnected && !bypasswmi)
 #ifdef CONFIG_HOST_TCMD_SUPPORT
-     /* TCMD doesnt support any data, free the buf and return */
+     /* TCMD doesn't support any data, free the buf and return */
     || (ar->arTargetMode == AR6000_TCMD_MODE)
 #endif
                                             ) {
@@ -6393,7 +6393,7 @@ static void DoHTCSendPktsTest(struct ar6_softc *ar, int MapNo, HTC_ENDPOINT_ID e
 /*
  * Add support for adding and removing a virtual adapter for soft AP.
  * Some OS requires different adapters names for station and soft AP mode.
- * To support these requirement, create and destory a netdevice  instance
+ * To support these requirement, create and destroy a netdevice  instance
  * when the AP mode is operational. A full fledged support for virual device
  * is not implemented. Rather a virtual interface is created and is linked
  * with the existing physical device instance during the operation of the 
diff --git a/drivers/staging/ath6kl/wmi/wmi.c b/drivers/staging/ath6kl/wmi/wmi.c
index 0ddaee21f9d..a00bf0a5987 100644
--- a/drivers/staging/ath6kl/wmi/wmi.c
+++ b/drivers/staging/ath6kl/wmi/wmi.c
@@ -4867,7 +4867,7 @@ wmi_set_country(struct wmi_t *wmip, u8 *countryCode)
 #ifdef CONFIG_HOST_TCMD_SUPPORT
 /* WMI  layer doesn't need to know the data type of the test cmd.
    This would be beneficial for customers like Qualcomm, who might
-   have different test command requirements from differnt manufacturers
+   have different test command requirements from different manufacturers
  */
 int
 wmi_test_cmd(struct wmi_t *wmip, u8 *buf, u32 len)
diff --git a/drivers/staging/bcm/Adapter.h b/drivers/staging/bcm/Adapter.h
index 32909e2938d..20cca24ff5f 100644
--- a/drivers/staging/bcm/Adapter.h
+++ b/drivers/staging/bcm/Adapter.h
@@ -412,7 +412,7 @@ struct _MINI_ADAPTER
 
         // this to keep track of the Tx and Rx MailBox Registers.
         atomic_t                    CurrNumFreeTxDesc;
-        // to keep track the no of byte recieved
+        // to keep track the no of byte received
         USHORT                          PrevNumRecvDescs;
         USHORT                          CurrNumRecvDescs;
         UINT                            u32TotalDSD;
@@ -527,7 +527,7 @@ struct _MINI_ADAPTER
         BOOLEAN                 bStatusWrite;
         UINT                    uiNVMDSDSize;
         UINT                    uiVendorExtnFlag;
-         //it will always represent choosed DSD at any point of time.
+         //it will always represent chosen DSD at any point of time.
          // Generally it is Active DSD but in case of NVM RD/WR it might be different.
         UINT                    ulFlashCalStart;
         ULONG                   ulFlashControlSectionStart;
@@ -546,10 +546,10 @@ struct _MINI_ADAPTER
         PFLASH_CS_INFO psFlashCSInfo ;
         PFLASH2X_VENDORSPECIFIC_INFO psFlash2xVendorInfo;
         UINT uiFlashBaseAdd; //Flash start address
-        UINT uiActiveISOOffset; //Active ISO offset choosen before f/w download
+        UINT uiActiveISOOffset; //Active ISO offset chosen before f/w download
         FLASH2X_SECTION_VAL eActiveISO; //Active ISO section val
-        FLASH2X_SECTION_VAL eActiveDSD; //Active DSD val choosen before f/w download
-        UINT uiActiveDSDOffsetAtFwDld;  //For accessing Active DSD choosen before f/w download
+        FLASH2X_SECTION_VAL eActiveDSD; //Active DSD val chosen before f/w download
+        UINT uiActiveDSDOffsetAtFwDld;  //For accessing Active DSD chosen before f/w download
         UINT uiFlashLayoutMajorVersion ;
         UINT uiFlashLayoutMinorVersion;
         BOOLEAN bAllDSDWriteAllow ;
diff --git a/drivers/staging/bcm/CmHost.c b/drivers/staging/bcm/CmHost.c
index 9be184f143e..c0ee95a7134 100644
--- a/drivers/staging/bcm/CmHost.c
+++ b/drivers/staging/bcm/CmHost.c
@@ -384,7 +384,7 @@ static inline VOID CopyClassifierRuleToSF(PMINI_ADAPTER Adapter,stConvergenceSLT
                 }
                 if(psfCSType->cCPacketClassificationRule.u8Protocol == 0)
                 {
-                        //we didnt get protocol field filled in by the BS
+                        //we didn't get protocol field filled in by the BS
                         pstClassifierEntry->ucProtocolLength=0;
                 }
                 else
@@ -879,7 +879,7 @@ static VOID CopyToAdapter( register PMINI_ADAPTER Adapter,		/**<Pointer to the A
 
                                                 /*
                                                         Passing the argument u8PHSI instead of clsid. Because for DL with no classifier rule,
-                                                        clsid will be zero hence we cant have multiple PHS rules for the same SF.
+                                                        clsid will be zero hence we can't have multiple PHS rules for the same SF.
                                                         To support multiple PHS rule, passing u8PHSI.
                                                 */
 
@@ -1103,7 +1103,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
         BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  "u8TrafficIndicationPreference    : 0x%X",
                 pstAddIndication->sfAuthorizedSet.u8TrafficIndicationPreference);
 
-        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved              : 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
+        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received              : 0x%X",pstAddIndication->sfAuthorizedSet.u8TotalClassifiers);
 
         nCurClassifierCnt = pstAddIndication->sfAuthorizedSet.u8TotalClassifiers;
 
@@ -1305,7 +1305,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
         BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  "u8TrafficIndicationPreference    : 0x%02X",
                 pstAddIndication->sfAdmittedSet.u8TrafficIndicationPreference);
 
-        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved              : 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
+        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received              : 0x%X",pstAddIndication->sfAdmittedSet.u8TotalClassifiers);
 
         nCurClassifierCnt = pstAddIndication->sfAdmittedSet.u8TotalClassifiers;
 
@@ -1502,7 +1502,7 @@ static VOID DumpCmControlPacket(PVOID pvBuffer)
         BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " u8TrafficIndicationPreference   : 0x%X",
                 pstAddIndication->sfActiveSet.u8TrafficIndicationPreference);
 
-        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Recieved              : 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
+        BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, DUMP_CONTROL, DBG_LVL_ALL,  " Total Classifiers Received              : 0x%X",pstAddIndication->sfActiveSet.u8TotalClassifiers);
 
         nCurClassifierCnt = pstAddIndication->sfActiveSet.u8TotalClassifiers;
 
@@ -1696,7 +1696,7 @@ ULONG StoreCmControlResponseMessage(PMINI_ADAPTER Adapter,PVOID pvBuffer,UINT *p
                 //No Special handling send the message as it is
                 return 1;
         }
-        // For DSA_REQ, only upto "psfAuthorizedSet" parameter should be accessed by driver!
+        // For DSA_REQ, only up to "psfAuthorizedSet" parameter should be accessed by driver!
 
         pstAddIndication=kmalloc(sizeof(*pstAddIndication), GFP_KERNEL);
         if(NULL==pstAddIndication)
@@ -1788,7 +1788,7 @@ static inline stLocalSFAddIndicationAlt
         BCM_DEBUG_PRINT( Adapter,DBG_TYPE_OTHERS, CONN_MSG, DBG_LVL_ALL, "Inside RestoreCmControlResponseMessage ");
         /*
         //Need to Allocate memory to contain the SUPER Large structures
-        //Our driver cant create these structures on Stack :(
+        //Our driver can't create these structures on Stack :(
         */
         pstAddIndicationDest=kmalloc(sizeof(stLocalSFAddIndicationAlt), GFP_KERNEL);
 
@@ -1957,7 +1957,7 @@ INT AllocAdapterDsxBuffer(PMINI_ADAPTER Adapter)
 {
         /*
         //Need to Allocate memory to contain the SUPER Large structures
-        //Our driver cant create these structures on Stack
+        //Our driver can't create these structures on Stack
         */
         Adapter->caDsxReqResp=kmalloc(sizeof(stLocalSFAddIndicationAlt)+LEADER_SIZE, GFP_KERNEL);
         if(!Adapter->caDsxReqResp)
diff --git a/drivers/staging/bcm/HostMIBSInterface.h b/drivers/staging/bcm/HostMIBSInterface.h
index f17a4f13474..e34531b638e 100644
--- a/drivers/staging/bcm/HostMIBSInterface.h
+++ b/drivers/staging/bcm/HostMIBSInterface.h
@@ -62,7 +62,7 @@ typedef struct _S_MIBS_HOST_INFO
         ULONG                   NumDesUsed;
         ULONG                   CurrNumFreeDesc;
         ULONG                   PrevNumFreeDesc;
-        // to keep track the no of byte recieved
+        // to keep track the no of byte received
         ULONG                   PrevNumRcevBytes;
         ULONG                   CurrNumRcevBytes;
 
diff --git a/drivers/staging/bcm/IPv6Protocol.c b/drivers/staging/bcm/IPv6Protocol.c
index 91b6fbe33c9..5b4fd372ec3 100644
--- a/drivers/staging/bcm/IPv6Protocol.c
+++ b/drivers/staging/bcm/IPv6Protocol.c
@@ -287,7 +287,7 @@ static BOOLEAN MatchSrcIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Head
 
         for(uiLoopIndex=0;uiLoopIndex<uiCountIPSrcAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
         {
-                BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Recieved Packet : \n ");
+                BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Address In Received Packet : \n ");
                 DumpIpv6Address(aulSrcIP);
                 BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Src Ipv6 Mask In Classifier Rule: \n");
                 DumpIpv6Address(&pstClassifierRule->stSrcIpAddress.ulIpv6Mask[uiLoopIndex]);
@@ -340,7 +340,7 @@ static BOOLEAN MatchDestIpv6Address(S_CLASSIFIER_RULE *pstClassifierRule,IPV6Hea
 
         for(uiLoopIndex=0;uiLoopIndex<uiCountIPDestinationAddresses;uiLoopIndex+=uiIpv6AddrNoLongWords)
         {
-                BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Recieved Packet : \n ");
+                BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Address In Received Packet : \n ");
                 DumpIpv6Address(aulDestIP);
                 BCM_DEBUG_PRINT( Adapter,DBG_TYPE_TX, IPV6_DBG, DBG_LVL_ALL, "\n Destination Ipv6 Mask In Classifier Rule: \n");
                 DumpIpv6Address(&pstClassifierRule->stDestIpAddress.ulIpv6Mask[uiLoopIndex]);
diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index bf5c0ad8661..96fa4ead793 100644
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -11,7 +11,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:                         BCM_STATUS_SUCCESS - If Wakeup of the HW Interface was successful.
-                                                Other           - If an error occured.
+                                                Other           - If an error occurred.
 */
 
 
@@ -26,7 +26,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:                         BCM_STATUS_SUCCESS - If Idle mode response related HW configuration was successful.
-                                                Other           - If an error occured.
+                                                Other           - If an error occurred.
 */
 
 /*
diff --git a/drivers/staging/bcm/InterfaceIsr.c b/drivers/staging/bcm/InterfaceIsr.c
index 220ff922bdc..67719d57256 100644
--- a/drivers/staging/bcm/InterfaceIsr.c
+++ b/drivers/staging/bcm/InterfaceIsr.c
@@ -80,8 +80,8 @@ static void read_int_callback(struct urb *urb/*, struct pt_regs *regs*/)
                 }
                 case -EINPROGRESS:
                 {
-                        //This situation may happend when URBunlink is used. for detail check usb_unlink_urb documentation.
-                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occured... something very bad is going on");
+                        //This situation may happened when URBunlink is used. for detail check usb_unlink_urb documentation.
+                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, INTF_INIT, DBG_LVL_ALL,"Impossibe condition has occurred... something very bad is going on");
                         break ;
                         //return;
                 }
diff --git a/drivers/staging/bcm/InterfaceRx.c b/drivers/staging/bcm/InterfaceRx.c
index 533f8ebe0f8..806ef5d1852 100644
--- a/drivers/staging/bcm/InterfaceRx.c
+++ b/drivers/staging/bcm/InterfaceRx.c
@@ -34,7 +34,7 @@ GetBulkInRcb(PS_INTERFACE_ADAPTER psIntfAdapter)
         return pRcb;
 }
 
-/*this is receive call back - when pkt avilable for receive (BULK IN- end point)*/
+/*this is receive call back - when pkt available for receive (BULK IN- end point)*/
 static void read_bulk_callback(struct urb *urb)
 {
         struct sk_buff *skb = NULL;
@@ -123,7 +123,7 @@ static void read_bulk_callback(struct urb *urb)
         if((ntohs(pLeader->Vcid) == VCID_CONTROL_PACKET) ||
             (!(pLeader->Status >= 0x20  &&  pLeader->Status <= 0x3F)))
         {
-            BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Recived control pkt...");
+            BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_CTRL, DBG_LVL_ALL, "Received control pkt...");
                 *(PUSHORT)skb->data = pLeader->Status;
         memcpy(skb->data+sizeof(USHORT), urb->transfer_buffer +
                         (sizeof(LEADER)), pLeader->PLength);
@@ -142,7 +142,7 @@ static void read_bulk_callback(struct urb *urb)
                   * Data Packet, Format a proper Ethernet Header
                   * and give it to the stack
                   */
-        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt...");
+        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt...");
                 skb_reserve(skb, 2 + SKB_RESERVE_PHS_BYTES);
                 memcpy(skb->data+ETH_HLEN, (PUCHAR)urb->transfer_buffer + sizeof(LEADER), pLeader->PLength);
                 skb->dev = Adapter->dev;
@@ -151,7 +151,7 @@ static void read_bulk_callback(struct urb *urb)
                 skb_put (skb, pLeader->PLength + ETH_HLEN);
                 Adapter->PackInfo[QueueIndex].uiTotalRxBytes+=pLeader->PLength;
                 Adapter->PackInfo[QueueIndex].uiThisPeriodRxBytes+= pLeader->PLength;
-        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Recived Data pkt of len :0x%X", pLeader->PLength);
+        BCM_DEBUG_PRINT(psIntfAdapter->psAdapter,DBG_TYPE_RX, RX_DATA, DBG_LVL_ALL, "Received Data pkt of len :0x%X", pLeader->PLength);
 
                 if(netif_running(Adapter->dev))
                 {
@@ -237,7 +237,7 @@ Input parameters:		IN PMINI_ADAPTER Adapter   - Miniport Adapter Context
 
 
 Return:                         TRUE  - If Rx was successful.
-                                        Other - If an error occured.
+                                        Other - If an error occurred.
 */
 
 BOOLEAN InterfaceRx (PS_INTERFACE_ADAPTER psIntfAdapter)
diff --git a/drivers/staging/bcm/Ioctl.h b/drivers/staging/bcm/Ioctl.h
index e4f8eb70be1..f859cf1c47b 100644
--- a/drivers/staging/bcm/Ioctl.h
+++ b/drivers/staging/bcm/Ioctl.h
@@ -241,7 +241,7 @@ typedef struct bulkwrmbuffer
 
 typedef enum _FLASH2X_SECTION_VAL
 {
-        NO_SECTION_VAL = 0, //no section is choosen when absolute offset is given for RD/WR
+        NO_SECTION_VAL = 0, //no section is chosen when absolute offset is given for RD/WR
         ISO_IMAGE1,
         ISO_IMAGE2,
         DSD0,
diff --git a/drivers/staging/bcm/LeakyBucket.c b/drivers/staging/bcm/LeakyBucket.c
index f4cf41c0e46..a55d4228e8e 100644
--- a/drivers/staging/bcm/LeakyBucket.c
+++ b/drivers/staging/bcm/LeakyBucket.c
@@ -213,7 +213,7 @@ static VOID CheckAndSendPacketFromIndex(PMINI_ADAPTER Adapter, PacketInfo *psSF)
                                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "For Queue: %zd\n", psSF-Adapter->PackInfo);
                                 BCM_DEBUG_PRINT(Adapter,DBG_TYPE_TX, TX_PACKETS, DBG_LVL_ALL, "\nAvailable Tokens = %d required = %d\n",
                                         psSF->uiCurrentTokenCount, iPacketLen);
-                                //this part indicates that becuase of non-availability of the tokens
+                                //this part indicates that because of non-availability of the tokens
                                 //pkt has not been send out hence setting the pending flag indicating the host to send it out
                                 //first next iteration  .
                                 psSF->uiPendedLast = TRUE;
diff --git a/drivers/staging/bcm/Misc.c b/drivers/staging/bcm/Misc.c
index d624f35d055..c5003b62234 100644
--- a/drivers/staging/bcm/Misc.c
+++ b/drivers/staging/bcm/Misc.c
@@ -602,7 +602,7 @@ VOID LinkControlResponseMessage(PMINI_ADAPTER Adapter,PUCHAR pucBuffer)
                                 Adapter->LinkStatus=LINKUP_DONE;
                                 Adapter->bPHSEnabled = *(pucBuffer+3);
                 Adapter->bETHCSEnabled = *(pucBuffer+4) & ETH_CS_MASK;
-                                BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Recieved In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
+                                BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0, "PHS Support Status Received In LinkUp Ack : %x \n",Adapter->bPHSEnabled);
                                 if((FALSE == Adapter->bShutStatus)&&
                                         (FALSE == Adapter->IdleMode))
                                 {
@@ -1153,7 +1153,7 @@ int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
 
         /*
      * 1. If the LED Settings fails, do not stop and do the Firmware download.
-     * 2. This init would happend only if the cfg file is present, else
+     * 2. This init would happened only if the cfg file is present, else
      *    call from the ioctl context.
      */
 
@@ -1185,7 +1185,7 @@ int InitCardAndDownloadFirmware(PMINI_ADAPTER ps_adapter)
                 status = PropagateCalParamsFromFlashToMemory(ps_adapter);
                 if(status)
                 {
-                        BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL," Propogation of Cal param failed .." );
+                        BCM_DEBUG_PRINT(ps_adapter,DBG_TYPE_INITEXIT, MP_INIT, DBG_LVL_ALL," Propagation of Cal param failed .." );
                         goto OUT;
                 }
         }
diff --git a/drivers/staging/bcm/Qos.c b/drivers/staging/bcm/Qos.c
index feade9451b2..c97020f0fb6 100644
--- a/drivers/staging/bcm/Qos.c
+++ b/drivers/staging/bcm/Qos.c
@@ -727,7 +727,7 @@ static BOOLEAN EthCSMatchVLANRules(S_CLASSIFIER_RULE *pstClassifierRule,struct s
 
         BCM_DEBUG_PRINT(Adapter, DBG_TYPE_TX, IPV4_DBG, DBG_LVL_ALL,  "%s  CLS UserPrio:%x CLS VLANID:%x\n",__FUNCTION__,ntohs(*((USHORT *)pstClassifierRule->usUserPriority)),pstClassifierRule->usVLANID);
 
-        /* In case FW didn't recieve the TLV, the priority field should be ignored */
+        /* In case FW didn't receive the TLV, the priority field should be ignored */
         if(pstClassifierRule->usValidityBitMap & (1<<PKT_CLASSIFICATION_USER_PRIORITY_VALID))
         {
                 if(pstEthCsPktInfo->eNwpktEthFrameType!=eEth802QVLANFrame)
diff --git a/drivers/staging/bcm/cntrl_SignalingInterface.h b/drivers/staging/bcm/cntrl_SignalingInterface.h
index 890778450a8..ab131806e2c 100644
--- a/drivers/staging/bcm/cntrl_SignalingInterface.h
+++ b/drivers/staging/bcm/cntrl_SignalingInterface.h
@@ -21,7 +21,7 @@
 #define VENDOR_PHS_PARAM_LENGTH 10
 #define MAX_NUM_ACTIVE_BS 10
 #define AUTH_TOKEN_LENGTH       10
-#define NUM_HARQ_CHANNELS       16      //Changed from 10 to 16 to accomodate all HARQ channels
+#define NUM_HARQ_CHANNELS       16      //Changed from 10 to 16 to accommodate all HARQ channels
 #define VENDOR_CLASSIFIER_PARAM_LENGTH 1 //Changed the size to 1 byte since we dnt use it
 #define  VENDOR_SPECIF_QOS_PARAM 1
 #define VENDOR_PHS_PARAM_LENGTH 10
@@ -109,13 +109,13 @@ typedef struct _stPhsRuleSI {
     B_UINT8                         u8PHSI;
         /**  PHSF Length Of The Service Flow*/
     B_UINT8                         u8PHSFLength;
-    /** String of bytes containing header information to be supressed by the sending CS and reconstructed by the receiving CS*/
+    /** String of bytes containing header information to be suppressed by the sending CS and reconstructed by the receiving CS*/
     B_UINT8                         u8PHSF[MAX_PHS_LENGTHS];
         /**  PHSM Length Of The Service Flow*/
     B_UINT8                         u8PHSMLength;
         /**  PHS Mask for the SF*/
     B_UINT8                         u8PHSM[MAX_PHS_LENGTHS];
-        /**  8bit Total number of bytes to be supressed for the Service Flow*/
+        /**  8bit Total number of bytes to be suppressed for the Service Flow*/
     B_UINT8                         u8PHSS;
         /**  8bit Indicates whether or not Packet Header contents need to be verified prior to supression */
     B_UINT8                         u8PHSV;
diff --git a/drivers/staging/bcm/nvm.c b/drivers/staging/bcm/nvm.c
index c7292373a65..4da5b7b54a1 100644
--- a/drivers/staging/bcm/nvm.c
+++ b/drivers/staging/bcm/nvm.c
@@ -313,7 +313,7 @@ INT ReadMacAddressFromNVM(PMINI_ADAPTER Adapter)
 //              uiNumBytes - Number of bytes to be read from the EEPROM.
 //
 // Returns:
-//              OSAL_STATUS_SUCCESS - if EEPROM read is successfull.
+//              OSAL_STATUS_SUCCESS - if EEPROM read is successful.
 //              <FAILURE>                       - if failed.
 //-----------------------------------------------------------------------------
 
@@ -431,7 +431,7 @@ INT BeceemEEPROMBulkRead(
 //              uiNumBytes - Number of bytes to be read from the FLASH.
 //
 // Returns:
-//              OSAL_STATUS_SUCCESS - if FLASH read is successfull.
+//              OSAL_STATUS_SUCCESS - if FLASH read is successful.
 //              <FAILURE>                       - if failed.
 //-----------------------------------------------------------------------------
 
@@ -1174,7 +1174,7 @@ static INT BeceemFlashBulkWrite(
         if(NULL == pTempBuff)
                 goto BeceemFlashBulkWrite_EXIT;
 //
-// check if the data to be written is overlapped accross sectors
+// check if the data to be written is overlapped across sectors
 //
         if(uiOffset+uiNumBytes < uiSectBoundary)
         {
@@ -1390,7 +1390,7 @@ static INT BeceemFlashBulkWriteStatus(
                 goto BeceemFlashBulkWriteStatus_EXIT;
 
 //
-// check if the data to be written is overlapped accross sectors
+// check if the data to be written is overlapped across sectors
 //
         if(uiOffset+uiNumBytes < uiSectBoundary)
         {
@@ -2020,7 +2020,7 @@ INT BeceemEEPROMBulkWrite(
 //              uiNumBytes - Number of bytes to be read from the NVM.
 //
 // Returns:
-//              OSAL_STATUS_SUCCESS - if NVM read is successfull.
+//              OSAL_STATUS_SUCCESS - if NVM read is successful.
 //              <FAILURE>                       - if failed.
 //-----------------------------------------------------------------------------
 
@@ -2083,7 +2083,7 @@ INT BeceemNVMRead(
 //              uiNumBytes - Number of bytes to be written..
 //
 // Returns:
-//              OSAL_STATUS_SUCCESS - if NVM write is successfull.
+//              OSAL_STATUS_SUCCESS - if NVM write is successful.
 //              <FAILURE>                       - if failed.
 //-----------------------------------------------------------------------------
 
@@ -2218,7 +2218,7 @@ INT BeceemNVMWrite(
 //          uiSectorSize - sector size
 //
 // Returns:
-//              OSAL_STATUS_SUCCESS - if NVM write is successfull.
+//              OSAL_STATUS_SUCCESS - if NVM write is successful.
 //              <FAILURE>                       - if failed.
 //-----------------------------------------------------------------------------
 
@@ -2430,7 +2430,7 @@ INT BcmInitNVM(PMINI_ADAPTER ps_adapter)
 *Input Parameter:
 *               Adapter data structure
 *Return Value :
-*               0. means sucess;
+*               0. means success;
 */
 /***************************************************************************/
 
@@ -2998,7 +2998,7 @@ INT BcmGetSectionValStartOffset(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlas
         /*
         *       Considering all the section for which end offset can be calculated or directly given
         *       in CS Structure. if matching case does not exist, return STATUS_FAILURE indicating section
-        *       endoffset can't be calculated or given in CS Stucture.
+        *       endoffset can't be calculated or given in CS Structure.
         */
 
         INT SectStartOffset = 0 ;
@@ -3173,7 +3173,7 @@ INT BcmGetSectionValEndOffset(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2
 *       @uiNumBytes : Number of Bytes for Read
 *
 *       Return value:-
-*               return true on sucess and STATUS_FAILURE on fail.
+*               return true on success and STATUS_FAILURE on fail.
 */
 
 INT BcmFlash2xBulkRead(
@@ -3241,7 +3241,7 @@ INT BcmFlash2xBulkRead(
 *       @uiNumBytes : Number of Bytes for Write
 *
 *       Return value:-
-*               return true on sucess and STATUS_FAILURE on fail.
+*               return true on success and STATUS_FAILURE on fail.
 *
 */
 
@@ -3308,7 +3308,7 @@ INT BcmFlash2xBulkWrite(
 *       @Adapter :-Drivers private Data Structure
 *
 *       Return Value:-
-*               Return STATUS_SUCESS if get sucess in setting the right DSD else negaive error code
+*               Return STATUS_SUCESS if get success in setting the right DSD else negaive error code
 *
 **/
 static INT BcmGetActiveDSD(PMINI_ADAPTER Adapter)
@@ -3384,7 +3384,7 @@ static INT BcmGetActiveISO(PMINI_ADAPTER Adapter)
 *       @uiOffset : Offset provided in the Flash
 *
 *       Return Value:-
-*       Sucess:-TRUE ,  offset is writable
+*       Success:-TRUE ,  offset is writable
 *       Failure:-FALSE, offset is RO
 *
 **/
@@ -3441,7 +3441,7 @@ static INT BcmDumpFlash2xSectionBitMap(PFLASH2X_BITMAP psFlash2xBitMap)
         @Adapter:-Driver private Data Structure
 *
 *       Return value:-
-*       Sucess:- STATUS_SUCESS
+*       Success:- STATUS_SUCESS
 *       Failure:- negative error code
 **/
 
@@ -3783,7 +3783,7 @@ INT BcmSetActiveSection(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSectV
                                         // This is a SPECIAL Case which will only happen if the current highest priority ISO has priority value = 0x7FFFFFFF.
                                         // We will write 1 to the current Highest priority ISO And then shall increase the priority of the requested ISO
                                         // by user
-                                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happend, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+                                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_OTHERS, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
                                         SectImagePriority = htonl(0x1);
                                         Status = BcmFlash2xBulkWrite(Adapter,
                                                                 &SectImagePriority,
@@ -3853,7 +3853,7 @@ INT BcmSetActiveSection(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSectV
                                         // This is a SPECIAL Case which will only happen if the current highest priority DSD has priority value = 0x7FFFFFFF.
                                         // We will write 1 to the current Highest priority DSD And then shall increase the priority of the requested DSD
                                         // by user
-                                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happend, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
+                                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, NVM_RW, DBG_LVL_ALL, "SectImagePriority wraparound happened, eFlash2xSectVal: 0x%x\n",eFlash2xSectVal);
                                         SectImagePriority = htonl(0x1);
 
                                         Status = BcmFlash2xBulkWrite(Adapter,
@@ -4119,7 +4119,7 @@ INT BcmCopyISO(PMINI_ADAPTER Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
                                                                                                 MAX_RW_SIZE);
                                 IsThisHeaderSector = FALSE ;
                         }
-                        //substracting the written Data
+                        //subtracting the written Data
                         uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
                 }
 
@@ -4250,7 +4250,7 @@ INT BcmCopyISO(PMINI_ADAPTER Adapter, FLASH2X_COPY_SECTION sCopySectStrut)
                                 IsThisHeaderSector = FALSE ;
                         }
 
-                        //substracting the written Data
+                        //subtracting the written Data
                         uiTotalDataToCopy = uiTotalDataToCopy - Adapter->uiSectorSize ;
                 }
 
@@ -4268,7 +4268,7 @@ BcmFlash2xCorruptSig : this API is used to corrupt the written sig in Bcm Header
 @eFlash2xSectionVal :- Flash section val which has header
 
 Return Value :-
-        Sucess :- If Section is present and writable, corrupt the sig and return STATUS_SUCCESS
+        Success :- If Section is present and writable, corrupt the sig and return STATUS_SUCCESS
         Failure :-Return negative error code
 
 
@@ -4301,7 +4301,7 @@ BcmFlash2xWriteSig :-this API is used to Write the sig if requested Section has
 @eFlashSectionVal :- Flash section val which has header
 
 Return Value :-
-        Sucess :- If Section is present and writable write the sig and return STATUS_SUCCESS
+        Success :- If Section is present and writable write the sig and return STATUS_SUCCESS
         Failure :-Return negative error code
 
 **/
@@ -4504,7 +4504,7 @@ BcmCopySection :- This API is used to copy the One section in another. Both sect
                              in case of numofBytes  equal zero complete section will be copied.
 
 Return Values-
-        Sucess : Return STATUS_SUCCESS
+        Success : Return STATUS_SUCCESS
         Faillure :- return negative error code
 
 **/
@@ -4621,7 +4621,7 @@ SaveHeaderIfPresent :- This API is use to Protect the Header in case of Header S
 @uiOffset :- Flash offset that has to be written.
 
 Return value :-
-        Sucess :- On sucess return STATUS_SUCCESS
+        Success :- On success return STATUS_SUCCESS
         Faillure :- Return negative error code
 
 **/
@@ -4634,7 +4634,7 @@ INT SaveHeaderIfPresent(PMINI_ADAPTER Adapter, PUCHAR pBuff, UINT uiOffset)
         UINT uiSectAlignAddr = 0;
         UINT sig = 0;
 
-        //making the offset sector alligned
+        //making the offset sector aligned
         uiSectAlignAddr = uiOffset & ~(Adapter->uiSectorSize - 1);
 
 
@@ -4643,7 +4643,7 @@ INT SaveHeaderIfPresent(PMINI_ADAPTER Adapter, PUCHAR pBuff, UINT uiOffset)
         (uiSectAlignAddr == BcmGetSectionValEndOffset(Adapter,DSD0)- Adapter->uiSectorSize))
         {
 
-                //offset from the sector boundry having the header map
+                //offset from the sector boundary having the header map
                 offsetToProtect = Adapter->psFlash2xCSInfo->OffsetFromDSDStartForDSDHeader % Adapter->uiSectorSize;
                 HeaderSizeToProtect = sizeof(DSD_HEADER);
                 bHasHeader = TRUE ;
@@ -4697,7 +4697,7 @@ BcmDoChipSelect : This will selcet the appropriate chip for writing.
 @Adapater :- Bcm Driver Private Data Structure
 
 OutPut:-
-        Select the Appropriate chip and retrn status Sucess
+        Select the Appropriate chip and retrn status Success
 **/
 static INT BcmDoChipSelect(PMINI_ADAPTER Adapter, UINT offset)
 {
@@ -5086,7 +5086,7 @@ static INT CorruptDSDSig(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSect
         {
                 if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
                 {
-                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence cant Corrupt signature");
+                        BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
                         return SECTOR_IS_NOT_WRITABLE;
                 }
         }
@@ -5155,7 +5155,7 @@ static INT CorruptISOSig(PMINI_ADAPTER Adapter, FLASH2X_SECTION_VAL eFlash2xSect
 
         if(IsSectionWritable(Adapter,eFlash2xSectionVal) != TRUE)
         {
-                BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence cant Corrupt signature");
+                BCM_DEBUG_PRINT(Adapter,DBG_TYPE_PRINTK, 0, 0,"Section is not Writable...Hence can't Corrupt signature");
                 return SECTOR_IS_NOT_WRITABLE;
         }
 
diff --git a/drivers/staging/brcm80211/README b/drivers/staging/brcm80211/README
index 99e67669f26..f8facb0786e 100644
--- a/drivers/staging/brcm80211/README
+++ b/drivers/staging/brcm80211/README
@@ -71,7 +71,7 @@ the driver. The devices use a single worldwide regulatory domain, with channels
 passive operation. Transmission on those channels is suppressed until
 appropriate other traffic is observed on those channels.
 
-Within the driver, we use the ficticious country code "X2" to represent this
+Within the driver, we use the fictitious country code "X2" to represent this
 worldwide regulatory domain. There is currently no interface to configure a
 different domain.
 
diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
index 65313fa0cf4..71c3571ee14 100644
--- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
+++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c
@@ -264,7 +264,7 @@ extern SDIOH_API_RC sdioh_disable_func_intr(void)
 }
 #endif                          /* defined(OOB_INTR_ONLY) && defined(HW_OOB) */
 
-/* Configure callback to client when we recieve client interrupt */
+/* Configure callback to client when we receive client interrupt */
 extern SDIOH_API_RC
 sdioh_interrupt_register(sdioh_info_t *sd, sdioh_cb_fn_t fn, void *argh)
 {
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
index cbfa1c1b705..1cf6c5dc2bb 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
@@ -46,7 +46,7 @@ extern int sdioh_mmc_irq(int irq);
 #include <mach/gpio.h>
 #endif
 
-/* Customer specific Host GPIO defintion  */
+/* Customer specific Host GPIO definition  */
 static int dhd_oob_gpio_num = -1;       /* GG 19 */
 
 module_param(dhd_oob_gpio_num, int, 0644);
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
index 02c6d446934..dd037579387 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_linux.c
@@ -478,7 +478,7 @@ static int dhd_set_suspend(int value, dhd_pub_t *dhd)
                         dhd_set_packet_filter(1, dhd);
 
                         /* if dtim skip setup as default force it
-                         * to wake each thrid dtim
+                         * to wake each third dtim
                          * for better power saving.
                          * Note that side effect is chance to miss BC/MC
                          * packet
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
index 106627040db..464f52af131 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c
@@ -3659,7 +3659,7 @@ static uint dhdsdio_readframes(dhd_bus_t *bus, uint maxframes, bool *finished)
                          * control pkt receives.
                          * Later we use buffer-poll for data as well
                          * as control packets.
-                         * This is required becuase dhd receives full
+                         * This is required because dhd receives full
                          * frame in gSPI unlike SDIO.
                          * After the frame is received we have to
                          * distinguish whether it is data
@@ -3744,7 +3744,7 @@ static uint dhdsdio_readframes(dhd_bus_t *bus, uint maxframes, bool *finished)
                                         bus->dhd->rx_errors++;
                                         dhd_os_sdunlock_rxq(bus->dhd);
                                         /* Force retry w/normal header read.
-                                         * Don't attemp NAK for
+                                         * Don't attempt NAK for
                                          * gSPI
                                          */
                                         dhdsdio_rxfail(bus, true,
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
index 774b4e916b2..c1b07ae3167 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
+++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
@@ -1079,7 +1079,7 @@ static int ieee_hw_init(struct ieee80211_hw *hw)
          */
         hw->max_rates = 2;      /* Primary rate and 1 fallback rate */
 
-        hw->channel_change_time = 7 * 1000;     /* channel change time is dependant on chip and band  */
+        hw->channel_change_time = 7 * 1000;     /* channel change time is dependent on chip and band  */
         hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 
         hw->rate_control_algorithm = "minstrel_ht";
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
index c6cdcd94095..f0086595788 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
@@ -89,7 +89,7 @@ u32 wl_ampdu_dbg =
 /* structure to hold tx fifo information and pre-loading state
  * counters specific to tx underflows of ampdus
  * some counters might be redundant with the ones in wlc or ampdu structures.
- * This allows to maintain a specific state independantly of
+ * This allows to maintain a specific state independently of
  * how often and/or when the wlc counters are updated.
  */
 typedef struct wlc_fifo_info {
@@ -265,7 +265,7 @@ static void scb_ampdu_update_config(struct ampdu_info *ampdu, struct scb *scb)
 
         scb_ampdu->max_pdu = (u8) ampdu->wlc->pub->tunables->ampdunummpdu;
 
-        /* go back to legacy size if some preloading is occuring */
+        /* go back to legacy size if some preloading is occurring */
         for (i = 0; i < NUM_FFPLD_FIFO; i++) {
                 if (ampdu->fifo_tb[i].ampdu_pld_size > FFPLD_PLD_INCR)
                         scb_ampdu->max_pdu = AMPDU_NUM_MPDU_LEGACY;
@@ -406,7 +406,7 @@ static int wlc_ffpld_check_txfunfl(struct wlc_info *wlc, int fid)
                 /*
                    compute a new dma xfer rate for max_mpdu @ max mcs.
                    This is the minimum dma rate that
-                   can acheive no unferflow condition for the current mpdu size.
+                   can achieve no unferflow condition for the current mpdu size.
                  */
                 /* note : we divide/multiply by 100 to avoid integer overflows */
                 fifo->dmaxferrate =
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
index 5a96dc3cdb3..4b6e181c7dc 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
@@ -1915,7 +1915,7 @@ void wlc_bmac_phy_reset(struct wlc_hw_info *wlc_hw)
 
         phy_bw_clkbits = wlc_phy_clk_bwbits(wlc_hw->band->pi);
 
-        /* Specfic reset sequence required for NPHY rev 3 and 4 */
+        /* Specific reset sequence required for NPHY rev 3 and 4 */
         if (WLCISNPHY(wlc_hw->band) && NREV_GE(wlc_hw->band->phyrev, 3) &&
             NREV_LE(wlc_hw->band->phyrev, 4)) {
                 /* Set the PHY bandwidth */
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_main.c b/drivers/staging/brcm80211/brcmsmac/wlc_main.c
index 639b5d7c960..717fced4580 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_main.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_main.c
@@ -8295,7 +8295,7 @@ wlc_txflowcontrol_prio_isset(struct wlc_info *wlc, struct wlc_txq_info *q,
         return (q->stopped & prio_mask) == prio_mask;
 }
 
-/* propogate the flow control to all interfaces using the given tx queue */
+/* propagate the flow control to all interfaces using the given tx queue */
 void wlc_txflowcontrol(struct wlc_info *wlc, struct wlc_txq_info *qi,
                        bool on, int prio)
 {
@@ -8462,7 +8462,7 @@ static void wlc_txq_free(struct wlc_info *wlc, struct wlc_txq_info *qi)
 }
 
 /*
- * Flag 'scan in progress' to withold dynamic phy calibration
+ * Flag 'scan in progress' to withhold dynamic phy calibration
  */
 void wlc_scan_start(struct wlc_info *wlc)
 {
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
index 0cfa36023cf..d284f1ac49c 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
@@ -332,7 +332,7 @@ wlc_rate_hwrs_filter_sort_validate(wlc_rateset_t *rs,
                 return false;
 }
 
-/* caluclate the rate of a rx'd frame and return it as a ratespec */
+/* calculate the rate of a rx'd frame and return it as a ratespec */
 ratespec_t BCMFASTPATH wlc_compute_rspec(d11rxhdr_t *rxh, u8 *plcp)
 {
         int phy_type;
diff --git a/drivers/staging/brcm80211/include/bcmsrom_fmt.h b/drivers/staging/brcm80211/include/bcmsrom_fmt.h
index ae2bff82860..4768968f910 100644
--- a/drivers/staging/brcm80211/include/bcmsrom_fmt.h
+++ b/drivers/staging/brcm80211/include/bcmsrom_fmt.h
@@ -103,7 +103,7 @@
 
 #define SROM_CRCREV             63
 
-/* SROM Rev 4: Reallocate the software part of the srom to accomodate
+/* SROM Rev 4: Reallocate the software part of the srom to accommodate
  * MIMO features. It assumes up to two PCIE functions and 440 bytes
  * of useable srom i.e. the useable storage in chips with OTP that
  * implements hardware redundancy.
diff --git a/drivers/staging/brcm80211/include/hndsoc.h b/drivers/staging/brcm80211/include/hndsoc.h
index 9747cc46ca9..6435686b329 100644
--- a/drivers/staging/brcm80211/include/hndsoc.h
+++ b/drivers/staging/brcm80211/include/hndsoc.h
@@ -181,7 +181,7 @@
  * conventions for the use the flash space:
  */
 
-/* Minumum amount of flash we support */
+/* Minimum amount of flash we support */
 #define FLASH_MIN               0x00020000      /* Minimum flash size */
 
 /* A boot/binary may have an embedded block that describes its size  */
diff --git a/drivers/staging/brcm80211/util/bcmotp.c b/drivers/staging/brcm80211/util/bcmotp.c
index ba71c108b36..17991212a22 100644
--- a/drivers/staging/brcm80211/util/bcmotp.c
+++ b/drivers/staging/brcm80211/util/bcmotp.c
@@ -213,7 +213,7 @@ static u16 ipxotp_read_bit(void *oh, chipcregs_t *cc, uint off)
         return (int)st;
 }
 
-/* Calculate max HW/SW region byte size by substracting fuse region and checksum size,
+/* Calculate max HW/SW region byte size by subtracting fuse region and checksum size,
  * osizew is oi->wsize (OTP size - GU size) in words
  */
 static int ipxotp_max_rgnsz(si_t *sih, int osizew)
@@ -229,7 +229,7 @@ static int ipxotp_max_rgnsz(si_t *sih, int osizew)
                 ret = osizew * 2 - OTP_SZ_FU_72 - OTP_SZ_CHECKSUM;
                 break;
         default:
-                ASSERT(0);      /* Don't konw about this chip */
+                ASSERT(0);      /* Don't know about this chip */
         }
 
         return ret;
diff --git a/drivers/staging/brcm80211/util/bcmsrom.c b/drivers/staging/brcm80211/util/bcmsrom.c
index eca35b94e96..850bfa6593e 100644
--- a/drivers/staging/brcm80211/util/bcmsrom.c
+++ b/drivers/staging/brcm80211/util/bcmsrom.c
@@ -1859,7 +1859,7 @@ static int initvars_srom_pci(si_t *sih, void *curmap, char **vars, uint *count)
 
         /*
          * Apply CRC over SROM content regardless SROM is present or not,
-         * and use variable <devpath>sromrev's existance in flash to decide
+         * and use variable <devpath>sromrev's existence in flash to decide
          * if we should return an error when CRC fails or read SROM variables
          * from flash.
          */
diff --git a/drivers/staging/brcm80211/util/hnddma.c b/drivers/staging/brcm80211/util/hnddma.c
index 8a81eb997f9..be339feae77 100644
--- a/drivers/staging/brcm80211/util/hnddma.c
+++ b/drivers/staging/brcm80211/util/hnddma.c
@@ -1179,7 +1179,7 @@ static void BCMFASTPATH dma64_txreclaim(dma_info_t *di, txd_range_t range)
                    (range == HNDDMA_RANGE_ALL) ? "all" :
                    ((range ==
                      HNDDMA_RANGE_TRANSMITTED) ? "transmitted" :
-                    "transfered")));
+                    "transferred")));
 
         if (di->txin == di->txout)
                 return;
@@ -1549,7 +1549,7 @@ static int BCMFASTPATH dma64_txfast(dma_info_t *di, struct sk_buff *p0,
  * If range is HNDDMA_RANGE_TRANSMITTED, reclaim descriptors that have be
  * transmitted as noted by the hardware "CurrDescr" pointer.
  * If range is HNDDMA_RANGE_TRANSFERED, reclaim descriptors that have be
- * transfered by the DMA as noted by the hardware "ActiveDescr" pointer.
+ * transferred by the DMA as noted by the hardware "ActiveDescr" pointer.
  * If range is HNDDMA_RANGE_ALL, reclaim all txd(s) posted to the ring and
  * return associated packet regardless of the value of hardware pointers.
  */
@@ -1563,7 +1563,7 @@ static void *BCMFASTPATH dma64_getnexttxp(dma_info_t *di, txd_range_t range)
                    (range == HNDDMA_RANGE_ALL) ? "all" :
                    ((range ==
                      HNDDMA_RANGE_TRANSMITTED) ? "transmitted" :
-                    "transfered")));
+                    "transferred")));
 
         if (di->ntxd == 0)
                 return NULL;
diff --git a/drivers/staging/brcm80211/util/sbpcmcia.h b/drivers/staging/brcm80211/util/sbpcmcia.h
index 6b9923f551a..d4c156586e8 100644
--- a/drivers/staging/brcm80211/util/sbpcmcia.h
+++ b/drivers/staging/brcm80211/util/sbpcmcia.h
@@ -109,7 +109,7 @@
 #define CISTPL_CFTABLE          0x1b    /* Config table entry */
 #define CISTPL_END              0xff    /* End of the CIS tuple chain */
 
-/* Function identifier provides context for the function extentions tuple */
+/* Function identifier provides context for the function extensions tuple */
 #define CISTPL_FID_SDIO         0x0c    /* Extensions defined by SDIO spec */
 
 /* Function extensions for LANs (assumed for extensions other than SDIO) */
diff --git a/drivers/staging/brcm80211/util/siutils.c b/drivers/staging/brcm80211/util/siutils.c
index ed168ceba5f..6ebd7f58af8 100644
--- a/drivers/staging/brcm80211/util/siutils.c
+++ b/drivers/staging/brcm80211/util/siutils.c
@@ -1319,7 +1319,7 @@ int si_clkctl_xtal(si_t *sih, uint what, bool on)
 }
 
 /*
- *  clock control policy function throught chipcommon
+ *  clock control policy function through chipcommon
  *
  *    set dynamic clk control mode (forceslow, forcefast, dynamic)
  *    returns true if we are forcing fast clock
diff --git a/drivers/staging/comedi/comedi_fops.c b/drivers/staging/comedi/comedi_fops.c
index a4ceb29c358..e7e72b8d8cd 100644
--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -2064,7 +2064,7 @@ void comedi_event(struct comedi_device *dev, struct comedi_subdevice *s)
                              COMEDI_CB_OVERFLOW)) {
                 runflags_mask |= SRF_RUNNING;
         }
-        /* remember if an error event has occured, so an error
+        /* remember if an error event has occurred, so an error
          * can be returned the next time the user does a read() */
         if (s->async->events & (COMEDI_CB_ERROR | COMEDI_CB_OVERFLOW)) {
                 runflags_mask |= SRF_ERROR;
diff --git a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
index 644bda44556..482a412aa65 100644
--- a/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
+++ b/drivers/staging/comedi/drivers/addi-data/APCI1710_Chrono.c
@@ -124,9 +124,9 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 |                     -5: The selected PCI input clock is wrong              |
 |                     -6: Timing unity selection is wrong                    |
 |                     -7: Base timing selection is wrong                     |
-|                     -8: You can not used the 40MHz clock selection wich    |
+|                     -8: You can not used the 40MHz clock selection with    |
 |                         this board                                         |
-|                     -9: You can not used the 40MHz clock selection wich    |
+|                     -9: You can not used the 40MHz clock selection with    |
 |                         this CHRONOS version                               |
 +----------------------------------------------------------------------------+
 */
@@ -721,10 +721,10 @@ int i_APCI1710_InsnConfigInitChrono(struct comedi_device *dev, struct comedi_sub
                                                                 }
                                                         } else {
                              /**************************************************************/
-                                                                /* You can not used the 40MHz clock selection wich this board */
+                                                                /* You can not use the 40MHz clock selection with this board */
                              /**************************************************************/
 
-                                                                DPRINTK("You can not used the 40MHz clock selection wich this board\n");
+                                                                DPRINTK("You can not used the 40MHz clock selection with this board\n");
                                                                 i_ReturnValue =
                                                                         -8;
                                                         }
diff --git a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
index 90e71e12784..b973095146f 100644
--- a/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
+++ b/drivers/staging/comedi/drivers/addi-data/addi_amcc_S5920.c
@@ -59,7 +59,7 @@ You should also find the complete GPL in the COPYING file accompanying this sour
 /*+----------------------------------------------------------------------------+*/
 /*| Input Parameters  : int    i_NbOfWordsToRead : Nbr. of word to read        |*/
 /*|                     unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
-/*|                     unsigned short   w_EepromStartAddress : Eeprom strat address     |*/
+/*|                     unsigned short   w_EepromStartAddress : Eeprom start address     |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Output Parameters : unsigned short * pw_DataRead : Read data                          |*/
 /*+----------------------------------------------------------------------------+*/
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
index 9dd857df93c..002297dfe33 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci2032.c
@@ -498,7 +498,7 @@ void v_APCI2032_Interrupt(int irq, void *d)
         struct comedi_device *dev = d;
         unsigned int ui_DO;
 
-        ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1;   /* Check if VCC OR CC interrupt has occured. */
+        ui_DO = inl(devpriv->iobase + APCI2032_DIGITAL_OP_IRQ) & 0x1;   /* Check if VCC OR CC interrupt has occurred. */
 
         if (ui_DO == 0) {
                 printk("\nInterrupt from unKnown source\n");
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
index a813fdbbd96..fc61214151b 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.c
@@ -148,7 +148,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
         unsigned short us_ConvertTiming, us_TmpValue, i;
         unsigned char b_Tmp;
 
-        /*  fix convertion time to 10 us */
+        /*  fix conversion time to 10 us */
         if (!devpriv->ui_EocEosConversionTime) {
                 printk("No timer0 Value using 10 us\n");
                 us_ConvertTiming = 10;
@@ -251,7 +251,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
                                 APCI3120_SELECT_TIMER_0_WORD;
                         outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0);
 
-                        /* Set the convertion time */
+                        /* Set the conversion time */
                         outw(us_ConvertTiming,
                                 devpriv->iobase + APCI3120_TIMER_VALUE);
 
@@ -311,7 +311,7 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
                                 APCI3120_SELECT_TIMER_0_WORD;
                         outb(b_Tmp, devpriv->iobase + APCI3120_TIMER_CRT0);
 
-                        /* Set the convertion time */
+                        /* Set the conversion time */
                         outw(us_ConvertTiming,
                                 devpriv->iobase + APCI3120_TIMER_VALUE);
 
@@ -354,9 +354,9 @@ int i_APCI3120_InsnReadAnalogInput(struct comedi_device *dev, struct comedi_subd
                         /* Start conversion */
                         outw(0, devpriv->iobase + APCI3120_START_CONVERSION);
 
-                        /* Waiting of end of convertion if interrupt is not installed */
+                        /* Waiting of end of conversion if interrupt is not installed */
                         if (devpriv->b_EocEosInterrupt == APCI3120_DISABLE) {
-                                /* Waiting the end of convertion */
+                                /* Waiting the end of conversion */
                                 do {
                                         us_TmpValue =
                                                 inw(devpriv->iobase +
@@ -854,7 +854,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
                                 b_DigitalOutputRegister) & 0xF0) |
                         APCI3120_SELECT_TIMER_0_WORD;
                 outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
-                /* Set the convertion time */
+                /* Set the conversion time */
                 outw(((unsigned short) ui_TimerValue0),
                         dev->iobase + APCI3120_TIMER_VALUE);
                 break;
@@ -872,7 +872,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
                                 b_DigitalOutputRegister) & 0xF0) |
                         APCI3120_SELECT_TIMER_1_WORD;
                 outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
-                /* Set the convertion time */
+                /* Set the conversion time */
                 outw(((unsigned short) ui_TimerValue1),
                         dev->iobase + APCI3120_TIMER_VALUE);
 
@@ -889,7 +889,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
                         APCI3120_SELECT_TIMER_0_WORD;
                 outb(b_Tmp, dev->iobase + APCI3120_TIMER_CRT0);
 
-                /* Set the convertion time */
+                /* Set the conversion time */
                 outw(((unsigned short) ui_TimerValue0),
                         dev->iobase + APCI3120_TIMER_VALUE);
                 break;
@@ -1104,7 +1104,7 @@ int i_APCI3120_CyclicAnalogInput(int mode, struct comedi_device *dev,
 
 /*
  * 4
- * amount of bytes to be transfered set transfer count used ADDON
+ * amount of bytes to be transferred set transfer count used ADDON
  * MWTC register commented testing
  * outl(devpriv->ui_DmaBufferUsesize[0],
  * devpriv->i_IobaseAddon+AMCC_OP_REG_AMWTC);
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
index b3c81979f14..50eb0a0a0a0 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3120.h
@@ -169,7 +169,7 @@ struct str_AnalogReadInformation {
 
         unsigned char b_Type;           /* EOC or EOS */
         unsigned char b_InterruptFlag;  /* Interrupt use or not                    */
-        unsigned int ui_ConvertTiming;  /* Selection of the convertion time        */
+        unsigned int ui_ConvertTiming;  /* Selection of the conversion time        */
         unsigned char b_NbrOfChannel;   /* Number of channel to read               */
         unsigned int ui_ChannelList[MAX_ANALOGINPUT_CHANNELS];  /* Number of the channel to be read        */
         unsigned int ui_RangeList[MAX_ANALOGINPUT_CHANNELS];    /* Gain of each channel                    */
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index a93e2349ad3..c75a1a1fd77 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -103,7 +103,7 @@ struct str_BoardInfos s_BoardInfos[100];	/*  100 will be the max number of board
 /*+----------------------------------------------------------------------------+*/
 /*| Input Parameters  : int    i_NbOfWordsToRead : Nbr. of word to read        |*/
 /*|                     unsigned int dw_PCIBoardEepromAddress : Address of the eeprom |*/
-/*|                     unsigned short   w_EepromStartAddress : Eeprom strat address     |*/
+/*|                     unsigned short   w_EepromStartAddress : Eeprom start address     |*/
 /*+----------------------------------------------------------------------------+*/
 /*| Output Parameters : unsigned short * pw_DataRead : Read data                          |*/
 /*+----------------------------------------------------------------------------+*/
@@ -849,7 +849,7 @@ int i_APCI3200_ReadDigitalOutput(struct comedi_device *dev, struct comedi_subdev
   |                                             0:Single Read
   |                                             1:Read more channel
   2:Single scan
-  |                                             3:Continous Scan
+  |                                             3:Continuous Scan
   data[13]          :Number of channels to read
   |                          data[14]          :RTD connection type
   :0:RTD not used
diff --git a/drivers/staging/comedi/drivers/adl_pci9118.c b/drivers/staging/comedi/drivers/adl_pci9118.c
index 766103c882a..632d5d0721c 100644
--- a/drivers/staging/comedi/drivers/adl_pci9118.c
+++ b/drivers/staging/comedi/drivers/adl_pci9118.c
@@ -23,7 +23,7 @@ For AI:
 - If cmd->scan_begin_src=TRIG_EXT then trigger input is TGIN (pin 46).
 - If cmd->convert_src=TRIG_EXT then trigger input is EXTTRG (pin 44).
 - If cmd->start_src/stop_src=TRIG_EXT then trigger input is TGIN (pin 46).
-- It is not neccessary to have cmd.scan_end_arg=cmd.chanlist_len but
+- It is not necessary to have cmd.scan_end_arg=cmd.chanlist_len but
   cmd.scan_end_arg modulo cmd.chanlist_len must by 0.
 - If return value of cmdtest is 5 then you've bad channel list
   (it isn't possible mixture S.E. and DIFF inputs or bipolar and unipolar
@@ -823,7 +823,7 @@ static void interrupt_pci9118_ai_dma(struct comedi_device *dev,
                 move_block_from_dma(dev, s,
                                     devpriv->dmabuf_virt[devpriv->dma_actbuf],
                                     samplesinbuf);
-                m = m - sampls;         /* m= how many samples was transfered */
+                m = m - sampls;         /* m= how many samples was transferred */
         }
 /* DPRINTK("YYY\n"); */
 
@@ -1297,7 +1297,7 @@ static int Compute_and_setup_dma(struct comedi_device *dev)
         DPRINTK("3 dmalen0=%d dmalen1=%d\n", dmalen0, dmalen1);
         /* transfer without TRIG_WAKE_EOS */
         if (!(devpriv->ai_flags & TRIG_WAKE_EOS)) {
-                /* if it's possible then allign DMA buffers to length of scan */
+                /* if it's possible then align DMA buffers to length of scan */
                 i = dmalen0;
                 dmalen0 =
                     (dmalen0 / (devpriv->ai_n_realscanlen << 1)) *
diff --git a/drivers/staging/comedi/drivers/adq12b.c b/drivers/staging/comedi/drivers/adq12b.c
index 4b470000b69..5361f318b01 100644
--- a/drivers/staging/comedi/drivers/adq12b.c
+++ b/drivers/staging/comedi/drivers/adq12b.c
@@ -65,7 +65,7 @@ If you do not specify any options, they will default to
    written by jeremy theler <thelerg@ib.cnea.gov.ar>
 
    instituto balseiro
-   comision nacional de energia atomica
+   commission nacional de energia atomica
    universidad nacional de cuyo
    argentina
 
@@ -342,7 +342,7 @@ static int adq12b_ai_rinsn(struct comedi_device *dev,
         /* convert n samples */
         for (n = 0; n < insn->n; n++) {
 
-                /* wait for end of convertion */
+                /* wait for end of conversion */
                 i = 0;
                 do {
                         /* udelay(1); */
diff --git a/drivers/staging/comedi/drivers/adv_pci1710.c b/drivers/staging/comedi/drivers/adv_pci1710.c
index 466e69f94ef..da2b75b15d4 100644
--- a/drivers/staging/comedi/drivers/adv_pci1710.c
+++ b/drivers/staging/comedi/drivers/adv_pci1710.c
@@ -98,7 +98,7 @@ Configuration options:
 #define Status_FE       0x0100  /* 1=FIFO is empty */
 #define Status_FH       0x0200  /* 1=FIFO is half full */
 #define Status_FF       0x0400  /* 1=FIFO is full, fatal error */
-#define Status_IRQ      0x0800  /* 1=IRQ occured */
+#define Status_IRQ      0x0800  /* 1=IRQ occurred */
 /* bits from control register (PCI171x_CONTROL) */
 #define Control_CNT0    0x0040  /* 1=CNT0 have external source,
                                  * 0=have internal 100kHz source */
@@ -1161,7 +1161,7 @@ static int check_channel_list(struct comedi_device *dev,
         }
 
         if (n_chan > 1) {
-                chansegment[0] = chanlist[0];   /*  first channel is everytime ok */
+                chansegment[0] = chanlist[0];   /*  first channel is every time ok */
                 for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {    /*  build part of chanlist */
                         /*  printk("%d. %d %d\n",i,CR_CHAN(chanlist[i]),CR_RANGE(chanlist[i])); */
                         if (chanlist[0] == chanlist[i])
@@ -1176,9 +1176,9 @@ static int check_channel_list(struct comedi_device *dev,
                             (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
                         if (CR_AREF(chansegment[i - 1]) == AREF_DIFF)
                                 nowmustbechan = (nowmustbechan + 1) % s->n_chan;
-                        if (nowmustbechan != CR_CHAN(chanlist[i])) {    /*  channel list isn't continous :-( */
+                        if (nowmustbechan != CR_CHAN(chanlist[i])) {    /*  channel list isn't continuous :-( */
                                 printk
-                                    ("channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
+                                    ("channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
                                      i, CR_CHAN(chanlist[i]), nowmustbechan,
                                      CR_CHAN(chanlist[0]));
                                 return 0;
diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c
index 0941643b386..61968a505f2 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas.c
@@ -115,7 +115,7 @@ analog triggering on 1602 series
 #define   INT_MASK 0x3          /*  mask of interrupt select bits */
 #define   INTE 0x4              /*  interrupt enable */
 #define   DAHFIE 0x8            /*  dac half full interrupt enable */
-#define   EOAIE 0x10            /*  end of aquisition interrupt enable */
+#define   EOAIE 0x10            /*  end of acquisition interrupt enable */
 #define   DAHFI 0x20            /*  dac half full read status / write interrupt clear */
 #define   EOAI 0x40             /*  read end of acq. interrupt status / write clear */
 #define   INT 0x80              /*  read interrupt status / write clear */
@@ -440,7 +440,7 @@ struct cb_pcidas_private {
         unsigned int divisor1;
         unsigned int divisor2;
         volatile unsigned int count;    /*  number of analog input samples remaining */
-        volatile unsigned int adc_fifo_bits;    /*  bits to write to interupt/adcfifo register */
+        volatile unsigned int adc_fifo_bits;    /*  bits to write to interrupt/adcfifo register */
         volatile unsigned int s5933_intcsr_bits;        /*  bits to write to amcc s5933 interrupt control/status register */
         volatile unsigned int ao_control_bits;  /*  bits to write to ao control and status register */
         short ai_buffer[AI_BUFFER_SIZE];
@@ -1653,7 +1653,7 @@ static irqreturn_t cb_pcidas_interrupt(int irq, void *d)
                 spin_unlock_irqrestore(&dev->spinlock, flags);
         } else if (status & EOAI) {
                 comedi_error(dev,
-                             "bug! encountered end of aquisition interrupt?");
+                             "bug! encountered end of acquisition interrupt?");
                 /*  clear EOA interrupt latch */
                 spin_lock_irqsave(&dev->spinlock, flags);
                 outw(devpriv->adc_fifo_bits | EOAI,
diff --git a/drivers/staging/comedi/drivers/cb_pcidas64.c b/drivers/staging/comedi/drivers/cb_pcidas64.c
index 2583e16cd02..1e324198996 100644
--- a/drivers/staging/comedi/drivers/cb_pcidas64.c
+++ b/drivers/staging/comedi/drivers/cb_pcidas64.c
@@ -104,7 +104,7 @@ TODO:
 #endif
 
 #define TIMER_BASE 25           /*  40MHz master clock */
-#define PRESCALED_TIMER_BASE    10000   /*  100kHz 'prescaled' clock for slow aquisition, maybe I'll support this someday */
+#define PRESCALED_TIMER_BASE    10000   /*  100kHz 'prescaled' clock for slow acquisition, maybe I'll support this someday */
 #define DMA_BUFFER_SIZE 0x1000
 
 #define PCI_VENDOR_ID_COMPUTERBOARDS    0x1307
@@ -136,7 +136,7 @@ enum write_only_registers {
         ADC_DELAY_INTERVAL_UPPER_REG = 0x1c,    /*  upper 8 bits of delay interval counter */
         ADC_COUNT_LOWER_REG = 0x1e,     /*  lower 16 bits of hardware conversion/scan counter */
         ADC_COUNT_UPPER_REG = 0x20,     /*  upper 8 bits of hardware conversion/scan counter */
-        ADC_START_REG = 0x22,   /*  software trigger to start aquisition */
+        ADC_START_REG = 0x22,   /*  software trigger to start acquisition */
         ADC_CONVERT_REG = 0x24, /*  initiates single conversion */
         ADC_QUEUE_CLEAR_REG = 0x26,     /*  clears adc queue */
         ADC_QUEUE_LOAD_REG = 0x28,      /*  loads adc queue */
@@ -199,7 +199,7 @@ enum intr_enable_contents {
         ADC_INTR_EOSCAN_BITS = 0x2,     /*  interrupt end of scan */
         ADC_INTR_EOSEQ_BITS = 0x3,      /*  interrupt end of sequence (probably wont use this it's pretty fancy) */
         EN_ADC_INTR_SRC_BIT = 0x4,      /*  enable adc interrupt source */
-        EN_ADC_DONE_INTR_BIT = 0x8,     /*  enable adc aquisition done interrupt */
+        EN_ADC_DONE_INTR_BIT = 0x8,     /*  enable adc acquisition done interrupt */
         DAC_INTR_SRC_MASK = 0x30,
         DAC_INTR_QEMPTY_BITS = 0x0,
         DAC_INTR_HIGH_CHAN_BITS = 0x10,
@@ -2867,7 +2867,7 @@ static int ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
         spin_unlock_irqrestore(&dev->spinlock, flags);
 
-        /*  start aquisition */
+        /*  start acquisition */
         if (cmd->start_src == TRIG_NOW) {
                 writew(0, priv(dev)->main_iobase + ADC_START_REG);
                 DEBUG_PRINT("soft trig\n");
@@ -2942,7 +2942,7 @@ static void pio_drain_ai_fifo_16(struct comedi_device *dev)
 /* Read from 32 bit wide ai fifo of 4020 - deal with insane grey coding of pointers.
  * The pci-4020 hardware only supports
  * dma transfers (it only supports the use of pio for draining the last remaining
- * points from the fifo when a data aquisition operation has completed).
+ * points from the fifo when a data acquisition operation has completed).
  */
 static void pio_drain_ai_fifo_32(struct comedi_device *dev)
 {
@@ -3046,7 +3046,7 @@ static void handle_ai_interrupt(struct comedi_device *dev,
                 comedi_error(dev, "fifo overrun");
                 async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
         }
-        /*  spin lock makes sure noone else changes plx dma control reg */
+        /*  spin lock makes sure no one else changes plx dma control reg */
         spin_lock_irqsave(&dev->spinlock, flags);
         dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
         if (plx_status & ICS_DMA1_A) {  /*  dma chan 1 interrupt */
@@ -3170,7 +3170,7 @@ static void handle_ao_interrupt(struct comedi_device *dev,
         async = s->async;
         cmd = &async->cmd;
 
-        /*  spin lock makes sure noone else changes plx dma control reg */
+        /*  spin lock makes sure no one else changes plx dma control reg */
         spin_lock_irqsave(&dev->spinlock, flags);
         dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
         if (plx_status & ICS_DMA0_A) {  /*  dma chan 0 interrupt */
diff --git a/drivers/staging/comedi/drivers/comedi_test.c b/drivers/staging/comedi/drivers/comedi_test.c
index b220b305541..a804742b802 100644
--- a/drivers/staging/comedi/drivers/comedi_test.c
+++ b/drivers/staging/comedi/drivers/comedi_test.c
@@ -81,7 +81,7 @@ static const struct waveform_board waveform_boards[] = {
 /* Data unique to this driver */
 struct waveform_private {
         struct timer_list timer;
-        struct timeval last;    /* time at which last timer interrupt occured */
+        struct timeval last;    /* time at which last timer interrupt occurred */
         unsigned int uvolt_amplitude;   /* waveform amplitude in microvolts */
         unsigned long usec_period;      /* waveform period in microseconds */
         unsigned long usec_current;     /* current time (modulo waveform period) */
diff --git a/drivers/staging/comedi/drivers/das1800.c b/drivers/staging/comedi/drivers/das1800.c
index 6ea93f9c0b4..60c2b12d6ff 100644
--- a/drivers/staging/comedi/drivers/das1800.c
+++ b/drivers/staging/comedi/drivers/das1800.c
@@ -1087,7 +1087,7 @@ static void das1800_flush_dma_channel(struct comedi_device *dev,
         return;
 }
 
-/* flushes remaining data from board when external trigger has stopped aquisition
+/* flushes remaining data from board when external trigger has stopped acquisition
  * and we are using dma transfers */
 static void das1800_flush_dma(struct comedi_device *dev,
                               struct comedi_subdevice *s)
diff --git a/drivers/staging/comedi/drivers/das800.c b/drivers/staging/comedi/drivers/das800.c
index aecaedc5027..96d41ad7695 100644
--- a/drivers/staging/comedi/drivers/das800.c
+++ b/drivers/staging/comedi/drivers/das800.c
@@ -391,7 +391,7 @@ static irqreturn_t das800_interrupt(int irq, void *d)
         spin_lock_irqsave(&dev->spinlock, irq_flags);
         outb(CONTROL1, dev->iobase + DAS800_GAIN);      /* select base address + 7 to be STATUS2 register */
         status = inb(dev->iobase + DAS800_STATUS2) & STATUS2_HCEN;
-        /* don't release spinlock yet since we want to make sure noone else disables hardware conversions */
+        /* don't release spinlock yet since we want to make sure no one else disables hardware conversions */
         if (status == 0) {
                 spin_unlock_irqrestore(&dev->spinlock, irq_flags);
                 return IRQ_HANDLED;
diff --git a/drivers/staging/comedi/drivers/dmm32at.c b/drivers/staging/comedi/drivers/dmm32at.c
index 693728e14bd..2b4e6e6eb82 100644
--- a/drivers/staging/comedi/drivers/dmm32at.c
+++ b/drivers/staging/comedi/drivers/dmm32at.c
@@ -532,7 +532,7 @@ static int dmm32at_ai_rinsn(struct comedi_device *dev,
                 msb = dmm_inb(dev, DMM32AT_AIMSB);
 
                 /* invert sign bit to make range unsigned, this is an
-                   idiosyncracy of the diamond board, it return
+                   idiosyncrasy of the diamond board, it return
                    conversions as a signed value, i.e. -32768 to
                    32767, flipping the bit and interpreting it as
                    signed gives you a range of 0 to 65535 which is
diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index a1664caa1d9..0131d5225b5 100644
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -560,7 +560,7 @@ int dt2811_adtrig(kdev_t minor, comedi_adtrig *adtrig)
         switch (dev->i_admode) {
         case COMEDI_MDEMAND:
                 dev->ntrig = adtrig->n - 1;
-                /* not neccessary */
+                /* not necessary */
                 /*printk("dt2811: AD soft trigger\n"); */
                 /*outb(DT2811_CLRERROR|DT2811_INTENB,
                         dev->iobase+DT2811_ADCSR); */
diff --git a/drivers/staging/comedi/drivers/dt9812.c b/drivers/staging/comedi/drivers/dt9812.c
index 06059850dae..32d9c42e965 100644
--- a/drivers/staging/comedi/drivers/dt9812.c
+++ b/drivers/staging/comedi/drivers/dt9812.c
@@ -773,7 +773,7 @@ static int dt9812_probe(struct usb_interface *interface,
                         retval = dt9812_read_info(dev, 1, &fw, sizeof(fw));
                         if (retval == 0) {
                                 dev_info(&interface->dev,
-                                         "usb_reset_configuration succeded "
+                                         "usb_reset_configuration succeeded "
                                          "after %d iterations\n", i);
                                 break;
                         }
diff --git a/drivers/staging/comedi/drivers/gsc_hpdi.c b/drivers/staging/comedi/drivers/gsc_hpdi.c
index 1661b57ca2a..bc020dea141 100644
--- a/drivers/staging/comedi/drivers/gsc_hpdi.c
+++ b/drivers/staging/comedi/drivers/gsc_hpdi.c
@@ -1031,7 +1031,7 @@ static irqreturn_t handle_interrupt(int irq, void *d)
                 writel(hpdi_intr_status,
                        priv(dev)->hpdi_iobase + INTERRUPT_STATUS_REG);
         }
-        /*  spin lock makes sure noone else changes plx dma control reg */
+        /*  spin lock makes sure no one else changes plx dma control reg */
         spin_lock_irqsave(&dev->spinlock, flags);
         dma0_status = readb(priv(dev)->plx9080_iobase + PLX_DMA0_CS_REG);
         if (plx_status & ICS_DMA0_A) {  /*  dma chan 0 interrupt */
@@ -1045,7 +1045,7 @@ static irqreturn_t handle_interrupt(int irq, void *d)
         }
         spin_unlock_irqrestore(&dev->spinlock, flags);
 
-        /*  spin lock makes sure noone else changes plx dma control reg */
+        /*  spin lock makes sure no one else changes plx dma control reg */
         spin_lock_irqsave(&dev->spinlock, flags);
         dma1_status = readb(priv(dev)->plx9080_iobase + PLX_DMA1_CS_REG);
         if (plx_status & ICS_DMA1_A) {  /*  XXX *//*  dma chan 1 interrupt */
diff --git a/drivers/staging/comedi/drivers/icp_multi.c b/drivers/staging/comedi/drivers/icp_multi.c
index 0bab39b3409..126550f3c02 100644
--- a/drivers/staging/comedi/drivers/icp_multi.c
+++ b/drivers/staging/comedi/drivers/icp_multi.c
@@ -715,7 +715,7 @@ Description:
         is built correctly
 
 Parameters:
-        struct comedi_device *dev       Pointer to current sevice structure
+        struct comedi_device *dev       Pointer to current service structure
         struct comedi_subdevice *s      Pointer to current subdevice structure
         unsigned int *chanlist  Pointer to packed channel list
         unsigned int n_chan     Number of channels to scan
@@ -772,7 +772,7 @@ Description:
         Status register.
 
 Parameters:
-        struct comedi_device *dev       Pointer to current sevice structure
+        struct comedi_device *dev       Pointer to current service structure
         struct comedi_subdevice *s      Pointer to current subdevice structure
         unsigned int *chanlist  Pointer to packed channel list
         unsigned int n_chan     Number of channels to scan
@@ -848,7 +848,7 @@ Description:
         This function resets the icp multi device to a 'safe' state
 
 Parameters:
-        struct comedi_device *dev       Pointer to current sevice structure
+        struct comedi_device *dev       Pointer to current service structure
 
 Returns:int     0 = success
 
diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c
index 75511bae019..b692fea0d2b 100644
--- a/drivers/staging/comedi/drivers/me4000.c
+++ b/drivers/staging/comedi/drivers/me4000.c
@@ -1810,7 +1810,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
                        ai_context->irq_status_reg) &
             ME4000_IRQ_STATUS_BIT_AI_HF) {
                 ISR_PDEBUG
-                    ("me4000_ai_isr(): Fifo half full interrupt occured\n");
+                    ("me4000_ai_isr(): Fifo half full interrupt occurred\n");
 
                 /* Read status register to find out what happened */
                 tmp = me4000_inl(dev, ai_context->ctrl_reg);
@@ -1903,7 +1903,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id)
         if (me4000_inl(dev,
                        ai_context->irq_status_reg) & ME4000_IRQ_STATUS_BIT_SC) {
                 ISR_PDEBUG
-                    ("me4000_ai_isr(): Sample counter interrupt occured\n");
+                    ("me4000_ai_isr(): Sample counter interrupt occurred\n");
 
                 s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOA;
 
diff --git a/drivers/staging/comedi/drivers/mpc624.c b/drivers/staging/comedi/drivers/mpc624.c
index a89eebd23f6..dd09a6d46e5 100644
--- a/drivers/staging/comedi/drivers/mpc624.c
+++ b/drivers/staging/comedi/drivers/mpc624.c
@@ -39,8 +39,8 @@ Status: working
 
 Configuration Options:
   [0] - I/O base address
-  [1] - convertion rate
-        Convertion rate  RMS noise  Effective Number Of Bits
+  [1] - conversion rate
+        Conversion rate  RMS noise  Effective Number Of Bits
         0      3.52kHz        23uV                17
         1      1.76kHz       3.5uV                20
         2       880Hz         2uV                21.3
@@ -93,8 +93,8 @@ Configuration Options:
 #define MPC624_DMY_BIT          (1<<30)
 #define MPC624_SGN_BIT          (1<<29)
 
-/* Convertion speeds */
-/* OSR4 OSR3 OSR2 OSR1 OSR0  Convertion rate  RMS noise  ENOB^
+/* Conversion speeds */
+/* OSR4 OSR3 OSR2 OSR1 OSR0  Conversion rate  RMS noise  ENOB^
  *  X    0    0    0    1        3.52kHz        23uV      17
  *  X    0    0    1    0        1.76kHz       3.5uV      20
  *  X    0    0    1    1         880Hz         2uV      21.3
@@ -227,7 +227,7 @@ static int mpc624_attach(struct comedi_device *dev, struct comedi_devconfig *it)
                 break;
         default:
                 printk
-                    (KERN_ERR "illegal convertion rate setting!"
+                    (KERN_ERR "illegal conversion rate setting!"
                         " Valid numbers are 0..9. Using 9 => 6.875 Hz, ");
                 devpriv->ulConvertionRate = MPC624_SPEED_3_52_kHz;
         }
@@ -296,7 +296,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
         }
 
         for (n = 0; n < insn->n; n++) {
-                /*  Trigger the convertion */
+                /*  Trigger the conversion */
                 outb(MPC624_ADSCK, dev->iobase + MPC624_ADC);
                 udelay(1);
                 outb(MPC624_ADCS | MPC624_ADSCK, dev->iobase + MPC624_ADC);
@@ -304,7 +304,7 @@ static int mpc624_ai_rinsn(struct comedi_device *dev,
                 outb(0, dev->iobase + MPC624_ADC);
                 udelay(1);
 
-                /*  Wait for the convertion to end */
+                /*  Wait for the conversion to end */
                 for (i = 0; i < TIMEOUT; i++) {
                         ucPort = inb(dev->iobase + MPC624_ADC);
                         if (ucPort & MPC624_ADBUSY)
diff --git a/drivers/staging/comedi/drivers/ni_at_a2150.c b/drivers/staging/comedi/drivers/ni_at_a2150.c
index 4d0053ea246..c192b71ec04 100644
--- a/drivers/staging/comedi/drivers/ni_at_a2150.c
+++ b/drivers/staging/comedi/drivers/ni_at_a2150.c
@@ -104,10 +104,10 @@ TRIG_WAKE_EOS
 #define STATUS_REG              0x12    /*  read only */
 #define   FNE_BIT               0x1     /*  fifo not empty */
 #define   OVFL_BIT              0x8     /*  fifo overflow */
-#define   EDAQ_BIT              0x10    /*  end of aquisition interrupt */
+#define   EDAQ_BIT              0x10    /*  end of acquisition interrupt */
 #define   DCAL_BIT              0x20    /*  offset calibration in progress */
-#define   INTR_BIT              0x40    /*  interrupt has occured */
-#define   DMA_TC_BIT            0x80    /*  dma terminal count interrupt has occured */
+#define   INTR_BIT              0x40    /*  interrupt has occurred */
+#define   DMA_TC_BIT            0x80    /*  dma terminal count interrupt has occurred */
 #define   ID_BITS(x)    (((x) >> 8) & 0x3)
 #define IRQ_DMA_CNTRL_REG               0x12    /*  write only */
 #define   DMA_CHAN_BITS(x)              ((x) & 0x7)     /*  sets dma channel */
@@ -434,7 +434,7 @@ static int a2150_attach(struct comedi_device *dev, struct comedi_devconfig *it)
         s->cancel = a2150_cancel;
 
         /* need to do this for software counting of completed conversions, to
-         * prevent hardware count from stopping aquisition */
+         * prevent hardware count from stopping acquisition */
         outw(HW_COUNT_DISABLE, dev->iobase + I8253_MODE_REG);
 
         /*  set card's irq and dma levels */
@@ -729,7 +729,7 @@ static int a2150_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
         /*  send trigger config bits */
         outw(trigger_bits, dev->iobase + TRIGGER_REG);
 
-        /*  start aquisition for soft trigger */
+        /*  start acquisition for soft trigger */
         if (cmd->start_src == TRIG_NOW) {
                 outw(0, dev->iobase + FIFO_START_REG);
         }
@@ -768,7 +768,7 @@ static int a2150_ai_rinsn(struct comedi_device *dev, struct comedi_subdevice *s,
         /*  setup start triggering */
         outw(0, dev->iobase + TRIGGER_REG);
 
-        /*  start aquisition for soft trigger */
+        /*  start acquisition for soft trigger */
         outw(0, dev->iobase + FIFO_START_REG);
 
         /* there is a 35.6 sample delay for data to get through the antialias filter */
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 241fe525abf..ab8f37022a3 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -183,11 +183,11 @@ NI manuals:
 #define   OVERRUN_BIT   0x2
 /* fifo overflow */
 #define   OVERFLOW_BIT  0x4
-/* timer interrupt has occured */
+/* timer interrupt has occurred */
 #define   TIMER_BIT     0x8
-/* dma terminal count has occured */
+/* dma terminal count has occurred */
 #define   DMATC_BIT     0x10
-/* external trigger has occured */
+/* external trigger has occurred */
 #define   EXT_TRIG_BIT  0x40
 /* 1200 boards only */
 #define STATUS2_REG     0x1d
@@ -1149,7 +1149,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
         range = CR_RANGE(cmd->chanlist[0]);
         aref = CR_AREF(cmd->chanlist[0]);
 
-        /* make sure board is disabled before setting up aquisition */
+        /* make sure board is disabled before setting up acquisition */
         spin_lock_irqsave(&dev->spinlock, flags);
         devpriv->command2_bits &= ~SWTRIG_BIT & ~HWTRIG_BIT & ~PRETRIG_BIT;
         devpriv->write_byte(devpriv->command2_bits, dev->iobase + COMMAND2_REG);
@@ -1349,7 +1349,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                 devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
         devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
-        /*  startup aquisition */
+        /*  startup acquisition */
 
         /*  command2 reg */
         /*  use 2 cascaded counters for pacing */
@@ -1571,8 +1571,8 @@ static void handle_isa_dma(struct comedi_device *dev)
         devpriv->write_byte(0x1, dev->iobase + DMATC_CLEAR_REG);
 }
 
-/* makes sure all data acquired by board is transfered to comedi (used
- * when aquisition is terminated by stop_src == TRIG_EXT). */
+/* makes sure all data acquired by board is transferred to comedi (used
+ * when acquisition is terminated by stop_src == TRIG_EXT). */
 static void labpc_drain_dregs(struct comedi_device *dev)
 {
         if (devpriv->current_transfer == isa_dma_transfer)
diff --git a/drivers/staging/comedi/drivers/ni_pcidio.c b/drivers/staging/comedi/drivers/ni_pcidio.c
index 005d2fe86ee..8dd3a01d48d 100644
--- a/drivers/staging/comedi/drivers/ni_pcidio.c
+++ b/drivers/staging/comedi/drivers/ni_pcidio.c
@@ -821,7 +821,7 @@ static int ni_pcidio_cmdtest(struct comedi_device *dev,
                         cmd->scan_begin_arg = MAX_SPEED;
                         err++;
                 }
-                /* no minumum speed */
+                /* no minimum speed */
         } else {
                 /* TRIG_EXT */
                 /* should be level/edge, hi/lo specification here */
diff --git a/drivers/staging/comedi/drivers/pcl812.c b/drivers/staging/comedi/drivers/pcl812.c
index c6dce4a1425..09ff4723b22 100644
--- a/drivers/staging/comedi/drivers/pcl812.c
+++ b/drivers/staging/comedi/drivers/pcl812.c
@@ -34,7 +34,7 @@
  *             and I cann't test all features.)
  *
  * This driver supports insn and cmd interfaces. Some boards support only insn
- * becouse their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
+ * because their hardware don't allow more (PCL-813/B, ACL-8113, ISO-813).
  * Data transfer over DMA is supported only when you measure only one
  * channel, this is too hardware limitation of these boards.
  *
diff --git a/drivers/staging/comedi/drivers/pcl816.c b/drivers/staging/comedi/drivers/pcl816.c
index ef3cc4f3be6..8f3fc6ee088 100644
--- a/drivers/staging/comedi/drivers/pcl816.c
+++ b/drivers/staging/comedi/drivers/pcl816.c
@@ -954,7 +954,7 @@ check_channel_list(struct comedi_device *dev,
         }
 
         if (chanlen > 1) {
-                /*  first channel is everytime ok */
+                /*  first channel is every time ok */
                 chansegment[0] = chanlist[0];
                 for (i = 1, seglen = 1; i < chanlen; i++, seglen++) {
                         /*  build part of chanlist */
@@ -968,10 +968,10 @@ check_channel_list(struct comedi_device *dev,
                         nowmustbechan =
                             (CR_CHAN(chansegment[i - 1]) + 1) % chanlen;
                         if (nowmustbechan != CR_CHAN(chanlist[i])) {
-                                /*  channel list isn't continous :-( */
+                                /*  channel list isn't continuous :-( */
                                 printk(KERN_WARNING
                                        "comedi%d: pcl816: channel list must "
-                                       "be continous! chanlist[%i]=%d but "
+                                       "be continuous! chanlist[%i]=%d but "
                                        "must be %d or %d!\n", dev->minor,
                                        i, CR_CHAN(chanlist[i]), nowmustbechan,
                                        CR_CHAN(chanlist[0]));
diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c
index f58d75be729..e3eea09ae1f 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -1231,7 +1231,7 @@ static int check_channel_list(struct comedi_device *dev,
         }
 
         if (n_chan > 1) {
-                /*  first channel is everytime ok */
+                /*  first channel is every time ok */
                 chansegment[0] = chanlist[0];
                 /*  build part of chanlist */
                 for (i = 1, seglen = 1; i < n_chan; i++, seglen++) {
@@ -1245,9 +1245,9 @@ static int check_channel_list(struct comedi_device *dev,
                                 break;
                         nowmustbechan =
                             (CR_CHAN(chansegment[i - 1]) + 1) % s->n_chan;
-                        if (nowmustbechan != CR_CHAN(chanlist[i])) {    /*  channel list isn't continous :-( */
+                        if (nowmustbechan != CR_CHAN(chanlist[i])) {    /*  channel list isn't continuous :-( */
                                 printk
-                                    ("comedi%d: pcl818: channel list must be continous! chanlist[%i]=%d but must be %d or %d!\n",
+                                    ("comedi%d: pcl818: channel list must be continuous! chanlist[%i]=%d but must be %d or %d!\n",
                                      dev->minor, i, CR_CHAN(chanlist[i]),
                                      nowmustbechan, CR_CHAN(chanlist[0]));
                                 return 0;
diff --git a/drivers/staging/comedi/drivers/pcmmio.c b/drivers/staging/comedi/drivers/pcmmio.c
index 5c832d7ed45..f2e88e57d55 100644
--- a/drivers/staging/comedi/drivers/pcmmio.c
+++ b/drivers/staging/comedi/drivers/pcmmio.c
@@ -733,7 +733,7 @@ static int pcmmio_dio_insn_config(struct comedi_device *dev,
                 break;
 
         case INSN_CONFIG_DIO_QUERY:
-                /* retreive from shadow register */
+                /* retrieve from shadow register */
                 data[1] =
                     (s->io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
                 return insn->n;
@@ -1279,7 +1279,7 @@ static int wait_dac_ready(unsigned long iobase)
            "no busy waiting" policy. The fact is that the hardware is
            normally so fast that we usually only need one time through the loop
            anyway. The longer timeout is for rare occasions and for detecting
-           non-existant hardware.  */
+           non-existent hardware.  */
 
         while (retry--) {
                 if (inb(iobase + 3) & 0x80)
diff --git a/drivers/staging/comedi/drivers/pcmuio.c b/drivers/staging/comedi/drivers/pcmuio.c
index 7a9287433b2..b2c2c8971a3 100644
--- a/drivers/staging/comedi/drivers/pcmuio.c
+++ b/drivers/staging/comedi/drivers/pcmuio.c
@@ -605,7 +605,7 @@ static int pcmuio_dio_insn_config(struct comedi_device *dev,
                 break;
 
         case INSN_CONFIG_DIO_QUERY:
-                /* retreive from shadow register */
+                /* retrieve from shadow register */
                 data[1] =
                     (s->io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT;
                 return insn->n;
diff --git a/drivers/staging/comedi/drivers/quatech_daqp_cs.c b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
index ebba9bb4777..82942e5728a 100644
--- a/drivers/staging/comedi/drivers/quatech_daqp_cs.c
+++ b/drivers/staging/comedi/drivers/quatech_daqp_cs.c
@@ -390,7 +390,7 @@ static int daqp_ai_insn_read(struct comedi_device *dev,
 
         outb(v, dev->iobase + DAQP_CONTROL);
 
-        /* Reset any pending interrupts (my card has a tendancy to require
+        /* Reset any pending interrupts (my card has a tendency to require
          * require multiple reads on the status register to achieve this)
          */
 
@@ -752,7 +752,7 @@ static int daqp_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 
         outb(v, dev->iobase + DAQP_CONTROL);
 
-        /* Reset any pending interrupts (my card has a tendancy to require
+        /* Reset any pending interrupts (my card has a tendency to require
          * require multiple reads on the status register to achieve this)
          */
         counter = 100;
diff --git a/drivers/staging/comedi/drivers/rtd520.c b/drivers/staging/comedi/drivers/rtd520.c
index 357858d2744..7f09ed755fe 100644
--- a/drivers/staging/comedi/drivers/rtd520.c
+++ b/drivers/staging/comedi/drivers/rtd520.c
@@ -75,7 +75,7 @@ Configuration options:
     das1800, since they have the best documented code.  Driver
     cb_pcidas64.c uses the same DMA controller.
 
-    As far as I can tell, the About interrupt doesnt work if Sample is
+    As far as I can tell, the About interrupt doesn't work if Sample is
     also enabled.  It turns out that About really isn't needed, since
     we always count down samples read.
 
@@ -370,7 +370,7 @@ struct rtdPrivate {
         /* timer gate (when enabled) */
         u8 utcGate[4];          /* 1 extra allows simple range check */
 
-        /* shadow registers affect other registers, but cant be read back */
+        /* shadow registers affect other registers, but can't be read back */
         /* The macros below update these on writes */
         u16 intMask;            /* interrupt mask */
         u16 intClearMask;       /* interrupt clear mask */
@@ -485,7 +485,7 @@ struct rtdPrivate {
 #define RtdAdcFifoGet(dev) \
         readw(devpriv->las1+LAS1_ADC_FIFO)
 
-/* Read two ADC data values (DOESNT WORK) */
+/* Read two ADC data values (DOESN'T WORK) */
 #define RtdAdcFifoGet2(dev) \
         readl(devpriv->las1+LAS1_ADC_FIFO)
 
@@ -857,7 +857,7 @@ static int rtd_attach(struct comedi_device *dev, struct comedi_devconfig *it)
                         DPRINTK("rtd520: PCI latency = %d\n", pci_latency);
                 }
 
-                /* Undocumented EPLD version (doesnt match RTD driver results) */
+                /* Undocumented EPLD version (doesn't match RTD driver results) */
                 /*DPRINTK ("rtd520: Reading epld from %p\n",
                    devpriv->las0+0);
                    epld_version = readl (devpriv->las0+0);
@@ -1291,7 +1291,7 @@ static int rtd520_probe_fifo_depth(struct comedi_device *dev)
 /*
   "instructions" read/write data in "one-shot" or "software-triggered"
   mode (simplest case).
-  This doesnt use interrupts.
+  This doesn't use interrupts.
 
   Note, we don't do any settling delays.  Use a instruction list to
   select, delay, then read.
@@ -2120,7 +2120,7 @@ static int rtd_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
 }
 
 /*
-  Stop a running data aquisition.
+  Stop a running data acquisition.
 */
 static int rtd_ai_cancel(struct comedi_device *dev, struct comedi_subdevice *s)
 {
diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index d5ba3ab357a..23fc64b9988 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -139,7 +139,7 @@ struct s626_private {
         int got_regions;
         short allocatedBuf;
         uint8_t ai_cmd_running; /*  ai_cmd is running */
-        uint8_t ai_continous;   /*  continous aquisition */
+        uint8_t ai_continous;   /*  continous acquisition */
         int ai_sample_count;    /*  number of samples to acquire */
         unsigned int ai_sample_timer;
         /*  time between samples in  units of the timer */
@@ -1048,7 +1048,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
         uint8_t group;
         uint16_t irqbit;
 
-        DEBUG("s626_irq_handler: interrupt request recieved!!!\n");
+        DEBUG("s626_irq_handler: interrupt request received!!!\n");
 
         if (dev->attached == 0)
                 return IRQ_NONE;
@@ -1165,14 +1165,14 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
                                                         (16 * group)))
                                             == 1 && cmd->start_src == TRIG_EXT) {
                                                 DEBUG
-                                                    ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+                                                    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
                                                      cmd->start_arg);
 
                                                 /*  Start executing the RPS program. */
                                                 MC_ENABLE(P_MC1, MC1_ERPS1);
 
                                                 DEBUG
-                                                    ("s626_irq_handler: aquisition start triggered!!!\n");
+                                                    ("s626_irq_handler: acquisition start triggered!!!\n");
 
                                                 if (cmd->scan_begin_src ==
                                                     TRIG_EXT) {
@@ -1194,7 +1194,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
                                             && cmd->scan_begin_src ==
                                             TRIG_EXT) {
                                                 DEBUG
-                                                    ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+                                                    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
                                                      cmd->scan_begin_arg);
 
                                                 /*  Trigger ADC scan loop start by setting RPS Signal 0. */
@@ -1236,7 +1236,7 @@ static irqreturn_t s626_irq_handler(int irq, void *d)
                                             == 1
                                             && cmd->convert_src == TRIG_EXT) {
                                                 DEBUG
-                                                    ("s626_irq_handler: Edge capture interrupt recieved from channel %d\n",
+                                                    ("s626_irq_handler: Edge capture interrupt received from channel %d\n",
                                                      cmd->convert_arg);
 
                                                 /*  Trigger ADC scan loop start by setting RPS Signal 0. */
@@ -1805,7 +1805,7 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                 DEBUG("s626_ai_cmd: NULL command\n");
                 return -EINVAL;
         } else {
-                DEBUG("s626_ai_cmd: command recieved!!!\n");
+                DEBUG("s626_ai_cmd: command received!!!\n");
         }
 
         if (dev->irq == 0) {
@@ -1880,7 +1880,7 @@ static int s626_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                 devpriv->ai_continous = 0;
                 break;
         case TRIG_NONE:
-                /*  continous aquisition */
+                /*  continous acquisition */
                 devpriv->ai_continous = 1;
                 devpriv->ai_sample_count = 0;
                 break;
@@ -2570,7 +2570,7 @@ static uint32_t I2Chandshake(struct comedi_device *dev, uint32_t val)
         while ((RR7146(P_I2CCTRL) & (I2C_BUSY | I2C_ERR)) == I2C_BUSY)
                 ;
 
-        /*  Return non-zero if I2C error occured. */
+        /*  Return non-zero if I2C error occurred. */
         return RR7146(P_I2CCTRL) & I2C_ERR;
 
 }
diff --git a/drivers/staging/comedi/drivers/usbdux.c b/drivers/staging/comedi/drivers/usbdux.c
index be93c30e4b1..e543e6c2b1b 100644
--- a/drivers/staging/comedi/drivers/usbdux.c
+++ b/drivers/staging/comedi/drivers/usbdux.c
@@ -285,7 +285,7 @@ struct usbduxsub {
         short int ao_cmd_running;
         /* pwm is running */
         short int pwm_cmd_running;
-        /* continous aquisition */
+        /* continous acquisition */
         short int ai_continous;
         short int ao_continous;
         /* number of samples to acquire */
@@ -500,7 +500,7 @@ static void usbduxsub_ai_IsocIrq(struct urb *urb)
 
         /* test, if we transmit only a fixed number of samples */
         if (!(this_usbduxsub->ai_continous)) {
-                /* not continous, fixed number of samples */
+                /* not continuous, fixed number of samples */
                 this_usbduxsub->ai_sample_count--;
                 /* all samples received? */
                 if (this_usbduxsub->ai_sample_count < 0) {
@@ -653,7 +653,7 @@ static void usbduxsub_ao_IsocIrq(struct urb *urb)
                 /* timer zero */
                 this_usbduxsub->ao_counter = this_usbduxsub->ao_timer;
 
-                /* handle non continous aquisition */
+                /* handle non continous acquisition */
                 if (!(this_usbduxsub->ao_continous)) {
                         /* fixed number of samples */
                         this_usbduxsub->ao_sample_count--;
@@ -957,7 +957,7 @@ static int usbdux_ai_cmdtest(struct comedi_device *dev,
         if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
                 err++;
 
-        /* scanning is continous */
+        /* scanning is continuous */
         tmp = cmd->convert_src;
         cmd->convert_src &= TRIG_NOW;
         if (!cmd->convert_src || tmp != cmd->convert_src)
@@ -1222,7 +1222,7 @@ static int usbdux_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                 up(&this_usbduxsub->sem);
                 return -EBUSY;
         }
-        /* set current channel of the running aquisition to zero */
+        /* set current channel of the running acquisition to zero */
         s->async->cur_chan = 0;
 
         this_usbduxsub->dux_commands[1] = cmd->chanlist_len;
@@ -1284,7 +1284,7 @@ static int usbdux_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                 this_usbduxsub->ai_sample_count = cmd->stop_arg;
                 this_usbduxsub->ai_continous = 0;
         } else {
-                /* continous aquisition */
+                /* continous acquisition */
                 this_usbduxsub->ai_continous = 1;
                 this_usbduxsub->ai_sample_count = 0;
         }
@@ -1515,7 +1515,7 @@ static int usbdux_ao_cmdtest(struct comedi_device *dev,
         /* just now we scan also in the high speed mode every frame */
         /* this is due to ehci driver limitations */
         if (0) {                /* (this_usbduxsub->high_speed) */
-                /* start immidiately a new scan */
+                /* start immediately a new scan */
                 /* the sampling rate is set by the coversion rate */
                 cmd->scan_begin_src &= TRIG_FOLLOW;
         } else {
@@ -1525,7 +1525,7 @@ static int usbdux_ao_cmdtest(struct comedi_device *dev,
         if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src)
                 err++;
 
-        /* scanning is continous */
+        /* scanning is continuous */
         tmp = cmd->convert_src;
         /* we always output at 1kHz just now all channels at once */
         if (0) {                /* (this_usbduxsub->high_speed) */
@@ -1645,7 +1645,7 @@ static int usbdux_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
         dev_dbg(&this_usbduxsub->interface->dev,
                 "comedi%d: %s\n", dev->minor, __func__);
 
-        /* set current channel of the running aquisition to zero */
+        /* set current channel of the running acquisition to zero */
         s->async->cur_chan = 0;
         for (i = 0; i < cmd->chanlist_len; ++i) {
                 chan = CR_CHAN(cmd->chanlist[i]);
@@ -1694,7 +1694,7 @@ static int usbdux_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
         this_usbduxsub->ao_counter = this_usbduxsub->ao_timer;
 
         if (cmd->stop_src == TRIG_COUNT) {
-                /* not continous */
+                /* not continuous */
                 /* counter */
                 /* high speed also scans everything at once */
                 if (0) {        /* (this_usbduxsub->high_speed) */
@@ -1708,7 +1708,7 @@ static int usbdux_ao_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
                 }
                 this_usbduxsub->ao_continous = 0;
         } else {
-                /* continous aquisition */
+                /* continous acquisition */
                 this_usbduxsub->ao_continous = 1;
                 this_usbduxsub->ao_sample_count = 0;
         }
diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 5b15e6df54e..2a8e725b785 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -180,7 +180,7 @@ struct usbduxfastsub_s {
         /* comedi device for the interrupt context */
         struct comedi_device *comedidev;
         short int ai_cmd_running;       /* asynchronous command is running */
-        short int ai_continous; /* continous aquisition */
+        short int ai_continous; /* continous acquisition */
         long int ai_sample_count;       /* number of samples to acquire */
         uint8_t *dux_commands;  /* commands */
         int ignore;             /* counter which ignores the first
@@ -392,7 +392,7 @@ static void usbduxfastsub_ai_Irq(struct urb *urb)
         p = urb->transfer_buffer;
         if (!udfs->ignore) {
                 if (!udfs->ai_continous) {
-                        /* not continous, fixed number of samples */
+                        /* not continuous, fixed number of samples */
                         n = urb->actual_length / sizeof(uint16_t);
                         if (unlikely(udfs->ai_sample_count < n)) {
                                 /*
@@ -775,7 +775,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
                 up(&udfs->sem);
                 return -EBUSY;
         }
-        /* set current channel of the running aquisition to zero */
+        /* set current channel of the running acquisition to zero */
         s->async->cur_chan = 0;
 
         /*
@@ -1182,7 +1182,7 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
                 }
                 udfs->ai_continous = 0;
         } else {
-                /* continous aquisition */
+                /* continous acquisition */
                 udfs->ai_continous = 1;
                 udfs->ai_sample_count = 0;
         }
diff --git a/drivers/staging/cptm1217/clearpad_tm1217.c b/drivers/staging/cptm1217/clearpad_tm1217.c
index 76e4b782d2f..0fe713e72e9 100644
--- a/drivers/staging/cptm1217/clearpad_tm1217.c
+++ b/drivers/staging/cptm1217/clearpad_tm1217.c
@@ -52,7 +52,7 @@
 #define TMA1217_DEV_STATUS              0x13    /* Device Status */
 #define TMA1217_INT_STATUS              0x14    /* Interrupt Status */
 
-/* Controller can detect upto 2 possible finger touches.
+/* Controller can detect up to 2 possible finger touches.
  * Each finger touch provides  12 bit X Y co-ordinates, the values are split
  * across 2 registers, and an 8 bit  Z value */
 #define TMA1217_FINGER_STATE            0x18 /* Finger State */
diff --git a/drivers/staging/crystalhd/crystalhd_cmds.c b/drivers/staging/crystalhd/crystalhd_cmds.c
index 1429608544d..3735ed3da4c 100644
--- a/drivers/staging/crystalhd/crystalhd_cmds.c
+++ b/drivers/staging/crystalhd/crystalhd_cmds.c
@@ -914,7 +914,7 @@ enum BC_STATUS crystalhd_user_open(struct crystalhd_cmd *ctx,
  * Return:
  *      status
  *
- * Closer aplication handle and release app specific
+ * Closer application handle and release app specific
  * resources.
  */
 enum BC_STATUS crystalhd_user_close(struct crystalhd_cmd *ctx, struct crystalhd_user *uc)
diff --git a/drivers/staging/crystalhd/crystalhd_hw.c b/drivers/staging/crystalhd/crystalhd_hw.c
index 13a514dd0f7..5acf39e7cde 100644
--- a/drivers/staging/crystalhd/crystalhd_hw.c
+++ b/drivers/staging/crystalhd/crystalhd_hw.c
@@ -302,7 +302,7 @@ static bool crystalhd_start_device(struct crystalhd_adp *adp)
         crystalhd_enable_interrupts(adp);
 
         /* Enable the option for getting the total no. of DWORDS
-         * that have been transfered by the RXDMA engine
+         * that have been transferred by the RXDMA engine
          */
         dbg_options = crystalhd_reg_rd(adp, MISC1_DMA_DEBUG_OPTIONS_REG);
         dbg_options |= 0x10;
@@ -1776,7 +1776,7 @@ enum BC_STATUS crystalhd_do_fw_cmd(struct crystalhd_hw *hw,
                 return sts;
         }
 
-        /*Get the Responce Address*/
+        /*Get the Response Address*/
         cmd_res_addr = bc_dec_reg_rd(hw->adp, Cpu2HstMbx1);
 
         /*Read the Response*/
@@ -2367,7 +2367,7 @@ enum BC_STATUS crystalhd_hw_set_core_clock(struct crystalhd_hw *hw)
         BCMLOG(BCMLOG_INFO, "clock is moving to %d with n %d with vco_mg %d\n",
                hw->core_clock_mhz, n, vco_mg);
 
-        /* Change the DRAM refresh rate to accomodate the new frequency */
+        /* Change the DRAM refresh rate to accommodate the new frequency */
         /* refresh reg = ((refresh_rate * clock_rate)/16) - 1; rounding up*/
         refresh_reg = (7 * hw->core_clock_mhz / 16);
         bc_dec_reg_wr(hw->adp, SDRAM_REF_PARAM, ((1 << 12) | refresh_reg));
diff --git a/drivers/staging/cxt1e1/musycc.c b/drivers/staging/cxt1e1/musycc.c
index f274c77fb3f..5cc3423a664 100644
--- a/drivers/staging/cxt1e1/musycc.c
+++ b/drivers/staging/cxt1e1/musycc.c
@@ -1455,7 +1455,7 @@ musycc_intr_bh_tasklet (ci_t * ci)
             /*
              * If the descriptor has not recovered, then leaving the EMPTY
              * entry set will not signal to the MUSYCC that this descriptor
-             * has been serviced. The Interrupt Queue can then start loosing
+             * has been serviced. The Interrupt Queue can then start losing
              * available descriptors and MUSYCC eventually encounters and
              * reports the INTFULL condition.  Per manual, changing any bit
              * marks descriptor as available, thus the use of different
diff --git a/drivers/staging/cxt1e1/musycc.h b/drivers/staging/cxt1e1/musycc.h
index d2c91ef686d..68f3660f447 100644
--- a/drivers/staging/cxt1e1/musycc.h
+++ b/drivers/staging/cxt1e1/musycc.h
@@ -74,7 +74,7 @@ extern      "C"
 
 #define INT_QUEUE_SIZE    MUSYCC_NIQD
 
-/* RAM image of MUSYCC registers layed out as a C structure */
+/* RAM image of MUSYCC registers laid out as a C structure */
     struct musycc_groupr
     {
         VINT32      thp[32];    /* Transmit Head Pointer [5-29]           */
@@ -96,7 +96,7 @@ extern      "C"
         VINT32      pcd;        /* Port Configuration Descriptor [5-19]   */
     };
 
-/* hardware MUSYCC registers layed out as a C structure */
+/* hardware MUSYCC registers laid out as a C structure */
     struct musycc_globalr
     {
         VINT32      gbp;        /* Group Base Pointer                     */
diff --git a/drivers/staging/cxt1e1/pmcc4_defs.h b/drivers/staging/cxt1e1/pmcc4_defs.h
index 186347b8d56..a39505f45c2 100644
--- a/drivers/staging/cxt1e1/pmcc4_defs.h
+++ b/drivers/staging/cxt1e1/pmcc4_defs.h
@@ -54,8 +54,8 @@
 #define MUSYCC_MTU          2048  /* default */
 #define MUSYCC_TXDESC_MIN   10    /* HDLC mode default */
 #define MUSYCC_RXDESC_MIN   18    /* HDLC mode default */
-#define MUSYCC_TXDESC_TRANS 4     /* Transparent mode minumum # of TX descriptors */
-#define MUSYCC_RXDESC_TRANS 12    /* Transparent mode minumum # of RX descriptors */
+#define MUSYCC_TXDESC_TRANS 4     /* Transparent mode minimum # of TX descriptors */
+#define MUSYCC_RXDESC_TRANS 12    /* Transparent mode minimum # of RX descriptors */
 
 #define MAX_DEFAULT_IFQLEN  32    /* network qlen */
 
diff --git a/drivers/staging/cxt1e1/sbecrc.c b/drivers/staging/cxt1e1/sbecrc.c
index 51232948091..3f3cd60ac36 100644
--- a/drivers/staging/cxt1e1/sbecrc.c
+++ b/drivers/staging/cxt1e1/sbecrc.c
@@ -95,7 +95,7 @@ sbeCrc (u_int8_t *buffer,          /* data buffer to crc */
 
     /*
      * if table not yet created, do so. Don't care about "extra" time
-     * checking this everytime sbeCrc() is called, since CRC calculations are
+     * checking this every time sbeCrc() is called, since CRC calculations are
      * already time consuming
      */
     if (!crcTableInit)
diff --git a/drivers/staging/cxt1e1/sbeproc.c b/drivers/staging/cxt1e1/sbeproc.c
index 70b9b33f352..f42531c3d8d 100644
--- a/drivers/staging/cxt1e1/sbeproc.c
+++ b/drivers/staging/cxt1e1/sbeproc.c
@@ -239,7 +239,7 @@ sbecom_proc_get_sbe_info (char *buffer, char **start, off_t offset,
      */
 
 #if 1
-    /* #4 - intepretation of above = set EOF, return len */
+    /* #4 - interpretation of above = set EOF, return len */
     *eof = 1;
 #endif
 
diff --git a/drivers/staging/et131x/et1310_address_map.h b/drivers/staging/et131x/et1310_address_map.h
index e6c8cb3828e..425e9274f28 100644
--- a/drivers/staging/et131x/et1310_address_map.h
+++ b/drivers/staging/et131x/et1310_address_map.h
@@ -856,7 +856,7 @@ typedef union _RXMAC_UNI_PF_ADDR3_t {
  */
 
 /*
- * structure for space availiable reg in rxmac address map.
+ * structure for space available reg in rxmac address map.
  * located at address 0x4094
  *
  * 31-17: reserved
@@ -1031,7 +1031,7 @@ typedef struct _RXMAC_t {				/* Location: */
  * 31: reset MII mgmt
  * 30-6: unused
  * 5: scan auto increment
- * 4: preamble supress
+ * 4: preamble suppress
  * 3: undefined
  * 2-0: mgmt clock reset
  */
diff --git a/drivers/staging/et131x/et1310_phy.h b/drivers/staging/et131x/et1310_phy.h
index 78349adc7d8..946c0c54740 100644
--- a/drivers/staging/et131x/et1310_phy.h
+++ b/drivers/staging/et131x/et1310_phy.h
@@ -468,7 +468,7 @@ typedef union _MI_ANAR_t {
 #define TRUEPHY_ANEG_COMPLETE           1
 #define TRUEPHY_ANEG_DISABLED           2
 
-/* Define duplex advertisment flags */
+/* Define duplex advertisement flags */
 #define TRUEPHY_ADV_DUPLEX_NONE         0x00
 #define TRUEPHY_ADV_DUPLEX_FULL         0x01
 #define TRUEPHY_ADV_DUPLEX_HALF         0x02
diff --git a/drivers/staging/et131x/et1310_rx.c b/drivers/staging/et131x/et1310_rx.c
index 339136f64be..fc6bd438366 100644
--- a/drivers/staging/et131x/et1310_rx.c
+++ b/drivers/staging/et131x/et1310_rx.c
@@ -122,7 +122,7 @@ int et131x_rx_dma_memory_alloc(struct et131x_adapter *adapter)
          * number of entries in FBR1.
          *
          * FBR1 holds "large" frames, FBR0 holds "small" frames.  If FBR1
-         * entries are huge in order to accomodate a "jumbo" frame, then it
+         * entries are huge in order to accommodate a "jumbo" frame, then it
          * will have less entries.  Conversely, FBR1 will now be relied upon
          * to carry more "normal" frames, thus it's entry size also increases
          * and the number of entries goes up too (since it now carries
diff --git a/drivers/staging/et131x/et131x_isr.c b/drivers/staging/et131x/et131x_isr.c
index ce4d9304267..f716e408712 100644
--- a/drivers/staging/et131x/et131x_isr.c
+++ b/drivers/staging/et131x/et131x_isr.c
@@ -466,7 +466,7 @@ void et131x_isr_handler(struct work_struct *work)
                 /* Handle SLV Timeout Interrupt */
                 if (status & ET_INTR_SLV_TIMEOUT) {
                         /*
-                         * This means a timeout has occured on a read or
+                         * This means a timeout has occurred on a read or
                          * write request to one of the JAGCore registers. The
                          * Global Resources block has terminated the request
                          * and on a read request, returned a "fake" value.
diff --git a/drivers/staging/et131x/et131x_netdev.c b/drivers/staging/et131x/et131x_netdev.c
index 0c298cae90d..b25bae29042 100644
--- a/drivers/staging/et131x/et131x_netdev.c
+++ b/drivers/staging/et131x/et131x_netdev.c
@@ -415,7 +415,7 @@ void et131x_multicast(struct net_device *netdev)
          */
         PacketFilter = adapter->PacketFilter;
 
-        /* Clear the 'multicast' flag locally; becuase we only have a single
+        /* Clear the 'multicast' flag locally; because we only have a single
          * flag to check multicast, and multiple multicast addresses can be
          * set, this is the easiest way to determine if more than one
          * multicast address is being set.
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h
index 4a89bd1bbf7..0b63f051f27 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_dev.h
@@ -30,7 +30,7 @@
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_reg
-// Descripton: This function will read the value of a given ASIC register.
+// Description: This function will read the value of a given ASIC register.
 // Input:
 //     dev    - device structure
 //     offset - ASIC register offset
@@ -49,7 +49,7 @@ static inline u16 ft1000_read_reg (struct net_device *dev, u16 offset) {
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_reg
-// Descripton: This function will set the value for a given ASIC register.
+// Description: This function will set the value for a given ASIC register.
 // Input:
 //     dev    - device structure
 //     offset - ASIC register offset
diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
index ff691d9b984..eeb7dd43f9a 100644
--- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
@@ -90,7 +90,7 @@ MODULE_SUPPORTED_DEVICE("FT1000");
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_asic_read
-// Descripton: This function will retrieve the value of a specific ASIC
+// Description: This function will retrieve the value of a specific ASIC
 //             register.
 // Input:
 //    dev - network device structure
@@ -107,7 +107,7 @@ inline u16 ft1000_asic_read(struct net_device *dev, u16 offset)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_asic_write
-// Descripton: This function will set the value of a specific ASIC
+// Description: This function will set the value of a specific ASIC
 //             register.
 // Input:
 //    dev - network device structure
@@ -124,7 +124,7 @@ inline void ft1000_asic_write(struct net_device *dev, u16 offset, u16 value)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_fifo_len
-// Descripton: This function will read the ASIC Uplink FIFO status register
+// Description: This function will read the ASIC Uplink FIFO status register
 //             which will return the number of bytes remaining in the Uplink FIFO.
 //             Sixteen bytes are subtracted to make sure that the ASIC does not
 //             reach its threshold.
@@ -148,7 +148,7 @@ static inline u16 ft1000_read_fifo_len(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_dpram
-// Descripton: This function will read the specific area of dpram
+// Description: This function will read the specific area of dpram
 //             (Electrabuzz ASIC only)
 // Input:
 //     dev    - device structure
@@ -175,7 +175,7 @@ u16 ft1000_read_dpram(struct net_device * dev, int offset)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_dpram
-// Descripton: This function will write to a specific area of dpram
+// Description: This function will write to a specific area of dpram
 //             (Electrabuzz ASIC only)
 // Input:
 //     dev    - device structure
@@ -201,7 +201,7 @@ static inline void ft1000_write_dpram(struct net_device *dev,
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_dpram_mag_16
-// Descripton: This function will read the specific area of dpram
+// Description: This function will read the specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -233,7 +233,7 @@ u16 ft1000_read_dpram_mag_16(struct net_device *dev, int offset, int Index)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_dpram_mag_16
-// Descripton: This function will write to a specific area of dpram
+// Description: This function will write to a specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -263,7 +263,7 @@ static inline void ft1000_write_dpram_mag_16(struct net_device *dev,
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_read_dpram_mag_32
-// Descripton: This function will read the specific area of dpram
+// Description: This function will read the specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -290,7 +290,7 @@ u32 ft1000_read_dpram_mag_32(struct net_device *dev, int offset)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_write_dpram_mag_32
-// Descripton: This function will write to a specific area of dpram
+// Description: This function will write to a specific area of dpram
 //             (Magnemite ASIC only)
 // Input:
 //     dev    - device structure
@@ -315,7 +315,7 @@ void ft1000_write_dpram_mag_32(struct net_device *dev, int offset, u32 value)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_enable_interrupts
-// Descripton: This function will enable interrupts base on the current interrupt mask.
+// Description: This function will enable interrupts base on the current interrupt mask.
 // Input:
 //     dev    - device structure
 // Output:
@@ -340,7 +340,7 @@ static void ft1000_enable_interrupts(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_disable_interrupts
-// Descripton: This function will disable all interrupts.
+// Description: This function will disable all interrupts.
 // Input:
 //     dev    - device structure
 // Output:
@@ -364,7 +364,7 @@ static void ft1000_disable_interrupts(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_asic
-// Descripton: This function will call the Card Service function to reset the
+// Description: This function will call the Card Service function to reset the
 //             ASIC.
 // Input:
 //     dev    - device structure
@@ -408,7 +408,7 @@ static void ft1000_reset_asic(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_card
-// Descripton: This function will reset the card
+// Description: This function will reset the card
 // Input:
 //     dev    - device structure
 // Output:
@@ -571,7 +571,7 @@ static int ft1000_reset_card(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_chkcard
-// Descripton: This function will check if the device is presently available on
+// Description: This function will check if the device is presently available on
 //             the system.
 // Input:
 //     dev    - device structure
@@ -607,7 +607,7 @@ static int ft1000_chkcard(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_hbchk
-// Descripton: This function will perform the heart beat check of the DSP as
+// Description: This function will perform the heart beat check of the DSP as
 //             well as the ASIC.
 // Input:
 //     dev    - device structure
@@ -828,7 +828,7 @@ static void ft1000_hbchk(u_long data)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_send_cmd
-// Descripton:
+// Description:
 // Input:
 // Output:
 //
@@ -908,7 +908,7 @@ void ft1000_send_cmd (struct net_device *dev, u16 *ptempbuffer, int size, u16 qt
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_receive_cmd
-// Descripton: This function will read a message from the dpram area.
+// Description: This function will read a message from the dpram area.
 // Input:
 //    dev - network device structure
 //    pbuffer - caller supply address to buffer
@@ -1003,7 +1003,7 @@ BOOLEAN ft1000_receive_cmd(struct net_device *dev, u16 * pbuffer, int maxsz, u16
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_proc_drvmsg
-// Descripton: This function will process the various driver messages.
+// Description: This function will process the various driver messages.
 // Input:
 //     dev    - device structure
 //     pnxtph - pointer to next pseudo header
@@ -1285,7 +1285,7 @@ void ft1000_proc_drvmsg(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_parse_dpram_msg
-// Descripton: This function will parse the message received from the DSP
+// Description: This function will parse the message received from the DSP
 //             via the DPRAM interface.
 // Input:
 //     dev    - device structure
@@ -1442,7 +1442,7 @@ int ft1000_parse_dpram_msg(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_flush_fifo
-// Descripton: This function will flush one packet from the downlink
+// Description: This function will flush one packet from the downlink
 //             FIFO.
 // Input:
 //     dev      - device structure
@@ -1587,7 +1587,7 @@ static void ft1000_flush_fifo(struct net_device *dev, u16 DrvErrNum)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_up_pkt
-// Descripton: This function will pull Flarion packets out of the Downlink
+// Description: This function will pull Flarion packets out of the Downlink
 //             FIFO and convert it to an ethernet packet.  The ethernet packet will
 //             then be deliver to the TCP/IP stack.
 // Input:
@@ -1773,7 +1773,7 @@ int ft1000_copy_up_pkt(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_down_pkt
-// Descripton: This function will take an ethernet packet and convert it to
+// Description: This function will take an ethernet packet and convert it to
 //             a Flarion packet prior to sending it to the ASIC Downlink
 //             FIFO.
 // Input:
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
index 8e622425aa1..1972b72450d 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_download.c
@@ -488,7 +488,7 @@ static int check_buffers(u16 *buff_w, u16 *buff_r, int len, int offset)
 // Parameters:  struct ft1000_device  - device structure
 //              u16 **pUsFile - DSP image file pointer in u16
 //              u8  **pUcFile - DSP image file pointer in u8
-//              long   word_length - lenght of the buffer to be written
+//              long   word_length - length of the buffer to be written
 //                                   to DPRAM
 //
 // Returns:     STATUS_SUCCESS - success
@@ -628,7 +628,7 @@ static void usb_dnld_complete (struct urb *urb)
 // Parameters:  struct ft1000_device  - device structure
 //              u16 **pUsFile - DSP image file pointer in u16
 //              u8  **pUcFile - DSP image file pointer in u8
-//              long   word_length - lenght of the buffer to be written
+//              long   word_length - length of the buffer to be written
 //                                   to DPRAM
 //
 // Returns:     STATUS_SUCCESS - success
@@ -817,7 +817,7 @@ u16 scram_dnldr(struct ft1000_device *ft1000dev, void *pFileStart,
                                                  * Error, beyond boot code range.
                                                  */
                                                 DEBUG
-                                                    ("FT1000:download:Download error: Requested len=%d exceeds BOOT code boundry.\n",
+                                                    ("FT1000:download:Download error: Requested len=%d exceeds BOOT code boundary.\n",
                                                      (int)word_length);
                                                 status = STATUS_FAILURE;
                                                 break;
@@ -950,7 +950,7 @@ u16 scram_dnldr(struct ft1000_device *ft1000dev, void *pFileStart,
                                                  * Error, beyond boot code range.
                                                  */
                                                 DEBUG
-                                                    ("FT1000:download:Download error: Requested len=%d exceeds DSP code boundry.\n",
+                                                    ("FT1000:download:Download error: Requested len=%d exceeds DSP code boundary.\n",
                                                      (int)word_length);
                                                 status = STATUS_FAILURE;
                                                 break;
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
index 78dcd49bb98..684e69eacb7 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_hw.c
@@ -585,7 +585,7 @@ int dsp_reload(struct ft1000_device *ft1000dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_asic
-// Descripton: This function will call the Card Service function to reset the
+// Description: This function will call the Card Service function to reset the
 //             ASIC.
 // Input:
 //     dev    - device structure
@@ -626,7 +626,7 @@ static void ft1000_reset_asic(struct net_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_reset_card
-// Descripton: This function will reset the card
+// Description: This function will reset the card
 // Input:
 //     dev    - device structure
 // Output:
@@ -917,7 +917,7 @@ static void ft1000_usb_transmit_complete(struct urb *urb)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_down_pkt
-// Descripton: This function will take an ethernet packet and convert it to
+// Description: This function will take an ethernet packet and convert it to
 //             a Flarion packet prior to sending it to the ASIC Downlink
 //             FIFO.
 // Input:
@@ -1075,10 +1075,10 @@ err:
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_copy_up_pkt
-// Descripton: This function will take a packet from the FIFO up link and
+// Description: This function will take a packet from the FIFO up link and
 //             convert it into an ethernet packet and deliver it to the IP stack
 // Input:
-//     urb - the receving usb urb
+//     urb - the receiving usb urb
 //
 // Output:
 //     status - FAILURE
@@ -1182,7 +1182,7 @@ static int ft1000_copy_up_pkt(struct urb *urb)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_submit_rx_urb
-// Descripton: the receiving function of the network driver
+// Description: the receiving function of the network driver
 //
 // Input:
 //     info - a private structure contains the device information
@@ -1316,7 +1316,7 @@ Jim
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_chkcard
-// Descripton: This function will check if the device is presently available on
+// Description: This function will check if the device is presently available on
 //             the system.
 // Input:
 //     dev    - device structure
@@ -1363,7 +1363,7 @@ static int ft1000_chkcard(struct ft1000_device *dev)
 //---------------------------------------------------------------------------
 //
 // Function:   ft1000_receive_cmd
-// Descripton: This function will read a message from the dpram area.
+// Description: This function will read a message from the dpram area.
 // Input:
 //    dev - network device structure
 //    pbuffer - caller supply address to buffer
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
index 3f72d5bb3f9..6a8a1969f9e 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_ioctl.h
@@ -55,7 +55,7 @@ struct pseudo_hdr {
    unsigned char     seq_num;          //sequence number
    unsigned char     rsvd2;            //reserved
    unsigned short    qos_class;        //Quality of Service class (Not applicable on Mobile)
-   unsigned short    checksum;         //Psuedo header checksum
+   unsigned short    checksum;         //Pseudo header checksum
 } __attribute__ ((packed));
 
 typedef struct _IOCTL_GET_VER
diff --git a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
index e047c03fbf3..f2ecb3eae9c 100644
--- a/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
+++ b/drivers/staging/ft1000/ft1000-usb/ft1000_usb.h
@@ -364,7 +364,7 @@ struct prov_record {
 
 #define ISR_EMPTY                       (u8)0x00         // no bits set in ISR
 
-#define ISR_DOORBELL_ACK        (u8)0x01                 //  the doorbell i sent has been recieved.
+#define ISR_DOORBELL_ACK        (u8)0x01                 //  the doorbell i sent has been received.
 
 #define ISR_DOORBELL_PEND       (u8)0x02         //  doorbell for me
 
diff --git a/drivers/staging/generic_serial/generic_serial.c b/drivers/staging/generic_serial/generic_serial.c
index 466988dbc37..f29dda4e9f2 100644
--- a/drivers/staging/generic_serial/generic_serial.c
+++ b/drivers/staging/generic_serial/generic_serial.c
@@ -113,7 +113,7 @@ int gs_write(struct tty_struct * tty,
 
                 c = count;
  
-                /* This is safe because we "OWN" the "head". Noone else can 
+                /* This is safe because we "OWN" the "head". No one else can 
                    change the "head": we own the port_write_mutex. */
                 /* Don't overrun the end of the buffer */
                 t = SERIAL_XMIT_SIZE - port->xmit_head;
diff --git a/drivers/staging/generic_serial/rio/map.h b/drivers/staging/generic_serial/rio/map.h
index 8366978578c..28a66129293 100644
--- a/drivers/staging/generic_serial/rio/map.h
+++ b/drivers/staging/generic_serial/rio/map.h
@@ -87,7 +87,7 @@ struct Map {
 ** The Topology array contains the ID of the unit connected to each of the
 ** four links on this unit. The entry will be 0xFFFF if NOTHING is connected
 ** to the link, or will be 0xFF00 if an UNKNOWN unit is connected to the link.
-** The Name field is a null-terminated string, upto 31 characters, containing
+** The Name field is a null-terminated string, up to 31 characters, containing
 ** the 'cute' name that the sysadmin/users know the RTA by. It is permissible
 ** for this string to contain any character in the range \040 to \176 inclusive.
 ** In particular, ctrl sequences and DEL (0x7F, \177) are not allowed. The
diff --git a/drivers/staging/generic_serial/rio/rioboot.c b/drivers/staging/generic_serial/rio/rioboot.c
index d956dd31600..ffa01c59021 100644
--- a/drivers/staging/generic_serial/rio/rioboot.c
+++ b/drivers/staging/generic_serial/rio/rioboot.c
@@ -109,7 +109,7 @@ int RIOBootCodeRTA(struct rio_info *p, struct DownLoad * rbp)
         rio_dprintk(RIO_DEBUG_BOOT, "Data at user address %p\n", rbp->DataP);
 
         /*
-         ** Check that we have set asside enough memory for this
+         ** Check that we have set aside enough memory for this
          */
         if (rbp->Count > SIXTY_FOUR_K) {
                 rio_dprintk(RIO_DEBUG_BOOT, "RTA Boot Code Too Large!\n");
@@ -293,7 +293,7 @@ int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp)
                 /*
                  **                     S T O P !
                  **
-                 ** Upto this point the code has been fairly rational, and possibly
+                 ** Up to this point the code has been fairly rational, and possibly
                  ** even straight forward. What follows is a pile of crud that will
                  ** magically turn into six bytes of transputer assembler. Normally
                  ** you would expect an array or something, but, being me, I have
@@ -419,7 +419,7 @@ int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp)
                 rio_dprintk(RIO_DEBUG_BOOT, "Set control port\n");
 
                 /*
-                 ** Now, wait for upto five seconds for the Tp to setup the parmmap
+                 ** Now, wait for up to five seconds for the Tp to setup the parmmap
                  ** pointer:
                  */
                 for (wait_count = 0; (wait_count < p->RIOConf.StartupTime) && (readw(&HostP->__ParmMapR) == OldParmMap); wait_count++) {
@@ -475,7 +475,7 @@ int RIOBootCodeHOST(struct rio_info *p, struct DownLoad *rbp)
 
                 /*
                  ** now wait for the card to set all the parmmap->XXX stuff
-                 ** this is a wait of upto two seconds....
+                 ** this is a wait of up to two seconds....
                  */
                 rio_dprintk(RIO_DEBUG_BOOT, "Looking for init_done - %d ticks\n", p->RIOConf.StartupTime);
                 HostP->timeout_id = 0;
diff --git a/drivers/staging/generic_serial/rio/riocmd.c b/drivers/staging/generic_serial/rio/riocmd.c
index f121357e5af..61efd538e85 100644
--- a/drivers/staging/generic_serial/rio/riocmd.c
+++ b/drivers/staging/generic_serial/rio/riocmd.c
@@ -863,7 +863,7 @@ int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP)
          ** being transferred from the write queue into the transmit packets
          ** (add_transmit) and no furthur transmit interrupt will be sent for that
          ** data. The next interrupt will occur up to 500ms later (RIOIntr is called
-         ** twice a second as a saftey measure). This was the case when kermit was
+         ** twice a second as a safety measure). This was the case when kermit was
          ** used to send data into a RIO port. After each packet was sent, TCFLSH
          ** was called to flush the read queue preemptively. PortP->InUse was
          ** incremented, thereby blocking the 6 byte acknowledgement packet
diff --git a/drivers/staging/generic_serial/rio/rioroute.c b/drivers/staging/generic_serial/rio/rioroute.c
index f9b936ac339..8757378e832 100644
--- a/drivers/staging/generic_serial/rio/rioroute.c
+++ b/drivers/staging/generic_serial/rio/rioroute.c
@@ -450,7 +450,7 @@ int RIORouteRup(struct rio_info *p, unsigned int Rup, struct Host *HostP, struct
                  ** we reset the unit, because we didn't boot it.
                  ** However, if the table is full, it could be that we did boot
                  ** this unit, and so we won't reboot it, because it isn't really
-                 ** all that disasterous to keep the old bins in most cases. This
+                 ** all that disastrous to keep the old bins in most cases. This
                  ** is a rather tacky feature, but we are on the edge of reallity
                  ** here, because the implication is that someone has connected
                  ** 16+MAX_EXTRA_UNITS onto one host.
@@ -678,7 +678,7 @@ static int RIOCheck(struct Host *HostP, unsigned int UnitId)
 
         HostP->Mapping[UnitId].Flags &= ~BEEN_HERE;
 
-        /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESNT KNOW THE HOST!\n", UnitId)); */
+        /* rio_dprint(RIO_DEBUG_ROUTE, ("Unit %d DOESN'T KNOW THE HOST!\n", UnitId)); */
 
         return 0;
 }
diff --git a/drivers/staging/generic_serial/rio/riotty.c b/drivers/staging/generic_serial/rio/riotty.c
index 8a90393faf3..e7e9911d7a7 100644
--- a/drivers/staging/generic_serial/rio/riotty.c
+++ b/drivers/staging/generic_serial/rio/riotty.c
@@ -124,7 +124,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
         }
 
         /*
-         ** Grab pointer to the port stucture
+         ** Grab pointer to the port structure
          */
         PortP = p->RIOPortp[SysPort];   /* Get control struc */
         rio_dprintk(RIO_DEBUG_TTY, "PortP: %p\n", PortP);
@@ -161,7 +161,7 @@ int riotopen(struct tty_struct *tty, struct file *filp)
         }
 
         /*
-         ** If the RTA has not booted yet and the user has choosen to block
+         ** If the RTA has not booted yet and the user has chosen to block
          ** until the RTA is present then we must spin here waiting for
          ** the RTA to boot.
          */
diff --git a/drivers/staging/generic_serial/sx.c b/drivers/staging/generic_serial/sx.c
index 1291462bcdd..4f94aaffbe8 100644
--- a/drivers/staging/generic_serial/sx.c
+++ b/drivers/staging/generic_serial/sx.c
@@ -158,13 +158,13 @@
  * Readying for release on 2.0.x (sorry David, 1.01 becomes 1.1 for RCS). 
  *
  * Revision 0.12  1999/03/28 09:20:10  wolff
- * Fixed problem in 0.11, continueing cleanup.
+ * Fixed problem in 0.11, continuing cleanup.
  *
  * Revision 0.11  1999/03/28 08:46:44  wolff
  * cleanup. Not good.
  *
  * Revision 0.10  1999/03/28 08:09:43  wolff
- * Fixed loosing characters on close.
+ * Fixed losing characters on close.
  *
  * Revision 0.9  1999/03/21 22:52:01  wolff
  * Ported back to 2.2.... (minor things)
@@ -1588,7 +1588,7 @@ static void sx_close(void *ptr)
 #define R0              if (read_sx_byte(board, i) != 0x55) return 1
 #define R1              if (read_sx_byte(board, i) != 0xaa) return 1
 
-/* This memtest takes a human-noticable time. You normally only do it
+/* This memtest takes a human-noticeable time. You normally only do it
    once a boot, so I guess that it is worth it. */
 static int do_memtest(struct sx_board *board, int min, int max)
 {
@@ -1645,7 +1645,7 @@ static int do_memtest(struct sx_board *board, int min, int max)
 #define R1              if (read_sx_word(board, i) != 0xaa55) return 1
 
 #if 0
-/* This memtest takes a human-noticable time. You normally only do it
+/* This memtest takes a human-noticeable time. You normally only do it
    once a boot, so I guess that it is worth it. */
 static int do_memtest_w(struct sx_board *board, int min, int max)
 {
diff --git a/drivers/staging/gma500/psb_drm.h b/drivers/staging/gma500/psb_drm.h
index fb9b4245bad..a339406052e 100644
--- a/drivers/staging/gma500/psb_drm.h
+++ b/drivers/staging/gma500/psb_drm.h
@@ -131,7 +131,7 @@ struct drm_psb_reloc {
         u32 pre_add;    /* Destination format: */
         u32 background; /* Destination add */
         u32 dst_buffer; /* Destination buffer. Index into buffer_list */
-        u32 arg0;               /* Reloc-op dependant */
+        u32 arg0;               /* Reloc-op dependent */
         u32 arg1;
 };
 
diff --git a/drivers/staging/gma500/psb_drv.c b/drivers/staging/gma500/psb_drv.c
index 44cd095d286..d01d45e7a14 100644
--- a/drivers/staging/gma500/psb_drv.c
+++ b/drivers/staging/gma500/psb_drv.c
@@ -561,7 +561,7 @@ static int psb_driver_unload(struct drm_device *dev)
                 kfree(dev_priv);
                 dev->dev_private = NULL;
 
-                /*destory VBT data*/
+                /*destroy VBT data*/
                 psb_intel_destroy_bios(dev);
         }
 
diff --git a/drivers/staging/gma500/psb_intel_bios.c b/drivers/staging/gma500/psb_intel_bios.c
index f5bcd119b87..48ac8ba7f40 100644
--- a/drivers/staging/gma500/psb_intel_bios.c
+++ b/drivers/staging/gma500/psb_intel_bios.c
@@ -271,7 +271,7 @@ bool psb_intel_init_bios(struct drm_device *dev)
 }
 
 /**
- * Destory and free VBT data
+ * Destroy and free VBT data
  */
 void psb_intel_destroy_bios(struct drm_device *dev)
 {
diff --git a/drivers/staging/gma500/psb_intel_sdvo.c b/drivers/staging/gma500/psb_intel_sdvo.c
index 731a5a2261d..1d2bb021c0a 100644
--- a/drivers/staging/gma500/psb_intel_sdvo.c
+++ b/drivers/staging/gma500/psb_intel_sdvo.c
@@ -573,7 +573,7 @@ static bool psb_sdvo_set_current_inoutmap(struct psb_intel_output *output,
         /* Make all fields of the  args/ret to zero */
         memset(byArgs, 0, sizeof(byArgs));
 
-        /* Fill up the arguement values; */
+        /* Fill up the argument values; */
         byArgs[0] = (u8) (in0outputmask & 0xFF);
         byArgs[1] = (u8) ((in0outputmask >> 8) & 0xFF);
         byArgs[2] = (u8) (in1outputmask & 0xFF);
diff --git a/drivers/staging/gma500/psb_intel_sdvo_regs.h b/drivers/staging/gma500/psb_intel_sdvo_regs.h
index a1d1475a931..c7107a37e33 100644
--- a/drivers/staging/gma500/psb_intel_sdvo_regs.h
+++ b/drivers/staging/gma500/psb_intel_sdvo_regs.h
@@ -217,7 +217,7 @@ struct psb_intel_sdvo_set_target_input_args {
 } __attribute__ ((packed));
 
 /**
- * Takes a struct psb_intel_sdvo_output_flags of which outputs are targetted by
+ * Takes a struct psb_intel_sdvo_output_flags of which outputs are targeted by
  * future output commands.
  *
  * Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
diff --git a/drivers/staging/gma500/psb_ttm_fence_user.h b/drivers/staging/gma500/psb_ttm_fence_user.h
index fc13f89c6e1..762a0572863 100644
--- a/drivers/staging/gma500/psb_ttm_fence_user.h
+++ b/drivers/staging/gma500/psb_ttm_fence_user.h
@@ -130,7 +130,7 @@ struct ttm_fence_unref_arg {
 };
 
 /*
- * Ioctl offsets frome extenstion start.
+ * Ioctl offsets from extenstion start.
  */
 
 #define TTM_FENCE_SIGNALED 0x01
diff --git a/drivers/staging/go7007/go7007.txt b/drivers/staging/go7007/go7007.txt
index 06a76da3212..9db1f3952fd 100644
--- a/drivers/staging/go7007/go7007.txt
+++ b/drivers/staging/go7007/go7007.txt
@@ -2,7 +2,7 @@ This is a driver for the WIS GO7007SB multi-format video encoder.
 
 Pete Eberlein <pete@sensoray.com>
 
-The driver was orignally released under the GPL and is currently hosted at:
+The driver was originally released under the GPL and is currently hosted at:
 http://nikosapi.org/wiki/index.php/WIS_Go7007_Linux_driver
 The go7007 firmware can be acquired from the package on the site above.
 
diff --git a/drivers/staging/hv/blkvsc_drv.c b/drivers/staging/hv/blkvsc_drv.c
index af789937be4..68ad17d6709 100644
--- a/drivers/staging/hv/blkvsc_drv.c
+++ b/drivers/staging/hv/blkvsc_drv.c
@@ -894,7 +894,7 @@ static int blkvsc_submit_request(struct blkvsc_request *blkvsc_req,
 
 /*
  * We break the request into 1 or more blkvsc_requests and submit
- * them.  If we cant submit them all, we put them on the
+ * them.  If we can't submit them all, we put them on the
  * pending_list. The blkvsc_request() will work on the pending_list.
  */
 static int blkvsc_do_request(struct block_device_context *blkdev,
diff --git a/drivers/staging/hv/channel_mgmt.c b/drivers/staging/hv/channel_mgmt.c
index bc0393a41d2..06b573227e8 100644
--- a/drivers/staging/hv/channel_mgmt.c
+++ b/drivers/staging/hv/channel_mgmt.c
@@ -166,7 +166,7 @@ EXPORT_SYMBOL(prep_negotiate_resp);
  * from Hyper-V. This stub responds to the default negotiate messages
  * that come in for every non IDE/SCSI/Network request.
  * This behavior is normally overwritten in the hv_utils driver. That
- * driver handles requests like gracefull shutdown, heartbeats etc.
+ * driver handles requests like graceful shutdown, heartbeats etc.
  *
  * Mainly used by Hyper-V drivers.
  */
diff --git a/drivers/staging/hv/hv.c b/drivers/staging/hv/hv.c
index 2d492adb95b..0b06f4fe583 100644
--- a/drivers/staging/hv/hv.c
+++ b/drivers/staging/hv/hv.c
@@ -37,7 +37,7 @@ struct hv_context hv_context = {
 
 /*
  * query_hypervisor_presence
- * - Query the cpuid for presense of windows hypervisor
+ * - Query the cpuid for presence of windows hypervisor
  */
 static int query_hypervisor_presence(void)
 {
diff --git a/drivers/staging/hv/hv_api.h b/drivers/staging/hv/hv_api.h
index 7114fceab21..43a722888dc 100644
--- a/drivers/staging/hv/hv_api.h
+++ b/drivers/staging/hv/hv_api.h
@@ -53,14 +53,14 @@ struct hv_guid {
 
 /*
  * HV_STATUS_INVALID_ALIGNMENT
- * The hypervisor could not perform the operation beacuse a parameter has an
+ * The hypervisor could not perform the operation because a parameter has an
  * invalid alignment.
  */
 #define HV_STATUS_INVALID_ALIGNMENT                     ((u16)0x0004)
 
 /*
  * HV_STATUS_INVALID_PARAMETER
- * The hypervisor could not perform the operation beacuse an invalid parameter
+ * The hypervisor could not perform the operation because an invalid parameter
  * was specified.
  */
 #define HV_STATUS_INVALID_PARAMETER                     ((u16)0x0005)
diff --git a/drivers/staging/hv/hv_kvp.h b/drivers/staging/hv/hv_kvp.h
index e069f59b513..8c402f357d3 100644
--- a/drivers/staging/hv/hv_kvp.h
+++ b/drivers/staging/hv/hv_kvp.h
@@ -36,7 +36,7 @@
  * registry.
  *
  * Note:  This value is used in defining the KVP exchange message - this value
- * cannot be modified without affecting the message size and compatability.
+ * cannot be modified without affecting the message size and compatibility.
  */
 
 /*
diff --git a/drivers/staging/hv/hv_util.c b/drivers/staging/hv/hv_util.c
index 4792f2c402b..2df15683f8f 100644
--- a/drivers/staging/hv/hv_util.c
+++ b/drivers/staging/hv/hv_util.c
@@ -80,7 +80,7 @@ static void shutdown_onchannelcallback(void *context)
                                 execute_shutdown = true;
 
                                 DPRINT_INFO(VMBUS, "Shutdown request received -"
-                                            " gracefull shutdown initiated");
+                                            " graceful shutdown initiated");
                                 break;
                         default:
                                 icmsghdrp->status = HV_E_FAIL;
diff --git a/drivers/staging/hv/rndis_filter.c b/drivers/staging/hv/rndis_filter.c
index e7189cd324c..048376b2b67 100644
--- a/drivers/staging/hv/rndis_filter.c
+++ b/drivers/staging/hv/rndis_filter.c
@@ -585,7 +585,7 @@ static int rndis_filter_set_packet_filter(struct rndis_device *dev,
                 ret = -1;
                 DPRINT_ERR(NETVSC, "timeout before we got a set response...");
                 /*
-                 * We cant deallocate the request since we may still receive a
+                 * We can't deallocate the request since we may still receive a
                  * send completion for it.
                  */
                 goto Exit;
diff --git a/drivers/staging/hv/tools/hv_kvp_daemon.c b/drivers/staging/hv/tools/hv_kvp_daemon.c
index f5a2dd69461..aa77a971aac 100644
--- a/drivers/staging/hv/tools/hv_kvp_daemon.c
+++ b/drivers/staging/hv/tools/hv_kvp_daemon.c
@@ -202,7 +202,7 @@ kvp_get_ip_address(int family, char *buffer, int length)
 
                         /*
                          * We only support AF_INET and AF_INET6
-                         * and the list of addresses is seperated by a ";".
+                         * and the list of addresses is separated by a ";".
                          */
                                 struct sockaddr_in6 *addr =
                                 (struct sockaddr_in6 *) curp->ifa_addr;
diff --git a/drivers/staging/iio/Documentation/iio_utils.h b/drivers/staging/iio/Documentation/iio_utils.h
index 8095727b396..fd78e4ff99a 100644
--- a/drivers/staging/iio/Documentation/iio_utils.h
+++ b/drivers/staging/iio/Documentation/iio_utils.h
@@ -556,7 +556,7 @@ int _write_sysfs_string(char *filename, char *basedir, char *val, int verify)
                 if (strcmp(temp, val) != 0) {
                         printf("Possible failure in string write of %s "
                                 "Should be %s "
-                                "writen to %s\%s\n",
+                                "written to %s\%s\n",
                                 temp,
                                 val,
                                 basedir,
diff --git a/drivers/staging/iio/accel/adis16201.h b/drivers/staging/iio/accel/adis16201.h
index c9bf22c1342..23fe54d09d1 100644
--- a/drivers/staging/iio/accel/adis16201.h
+++ b/drivers/staging/iio/accel/adis16201.h
@@ -70,7 +70,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16201_state {
diff --git a/drivers/staging/iio/accel/adis16203.h b/drivers/staging/iio/accel/adis16203.h
index b39323eac9e..b88688128d6 100644
--- a/drivers/staging/iio/accel/adis16203.h
+++ b/drivers/staging/iio/accel/adis16203.h
@@ -65,7 +65,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16203_state {
diff --git a/drivers/staging/iio/accel/adis16204.h b/drivers/staging/iio/accel/adis16204.h
index e9ed7cb048c..e61844684f9 100644
--- a/drivers/staging/iio/accel/adis16204.h
+++ b/drivers/staging/iio/accel/adis16204.h
@@ -73,7 +73,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16204_state {
diff --git a/drivers/staging/iio/accel/adis16209.h b/drivers/staging/iio/accel/adis16209.h
index 4e97596620e..8b0da134955 100644
--- a/drivers/staging/iio/accel/adis16209.h
+++ b/drivers/staging/iio/accel/adis16209.h
@@ -109,7 +109,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16209_state {
diff --git a/drivers/staging/iio/accel/adis16220.h b/drivers/staging/iio/accel/adis16220.h
index 7013314a9d7..4d5758c2c04 100644
--- a/drivers/staging/iio/accel/adis16220.h
+++ b/drivers/staging/iio/accel/adis16220.h
@@ -132,7 +132,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16220_state {
diff --git a/drivers/staging/iio/accel/adis16240.h b/drivers/staging/iio/accel/adis16240.h
index 51a807dde27..76a45797b9d 100644
--- a/drivers/staging/iio/accel/adis16240.h
+++ b/drivers/staging/iio/accel/adis16240.h
@@ -132,7 +132,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16240_state {
diff --git a/drivers/staging/iio/accel/lis3l02dq.h b/drivers/staging/iio/accel/lis3l02dq.h
index 579b3a26e5d..11402187f9a 100644
--- a/drivers/staging/iio/accel/lis3l02dq.h
+++ b/drivers/staging/iio/accel/lis3l02dq.h
@@ -57,7 +57,7 @@
 /* Reboot memory content */
 #define LIS3L02DQ_REG_CTRL_2_REBOOT_MEMORY      0x10
 
-/* Interupt Enable - applies data ready to the RDY pad */
+/* Interrupt Enable - applies data ready to the RDY pad */
 #define LIS3L02DQ_REG_CTRL_2_ENABLE_INTERRUPT   0x08
 
 /* Enable Data Ready Generation - relationship with previous unclear in docs */
@@ -70,34 +70,34 @@
  * - option for 16 bit left justified */
 #define LIS3L02DQ_REG_CTRL_2_DATA_ALIGNMENT_16_BIT_LEFT_JUSTIFIED       0x01
 
-/* Interupt related stuff */
+/* Interrupt related stuff */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_ADDR                  0x23
 
 /* Switch from or combination fo conditions to and */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_BOOLEAN_AND           0x80
 
-/* Latch interupt request,
+/* Latch interrupt request,
  * if on ack must be given by reading the ack register */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_LATCH_SRC             0x40
 
-/* Z Interupt on High (above threshold)*/
+/* Z Interrupt on High (above threshold)*/
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_HIGH      0x20
-/* Z Interupt on Low */
+/* Z Interrupt on Low */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Z_LOW       0x10
-/* Y Interupt on High */
+/* Y Interrupt on High */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_HIGH      0x08
-/* Y Interupt on Low */
+/* Y Interrupt on Low */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_Y_LOW       0x04
-/* X Interupt on High */
+/* X Interrupt on High */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_HIGH      0x02
-/* X Interupt on Low */
+/* X Interrupt on Low */
 #define LIS3L02DQ_REG_WAKE_UP_CFG_INTERRUPT_X_LOW 0x01
 
-/* Register that gives description of what caused interupt
+/* Register that gives description of what caused interrupt
  * - latched if set in CFG_ADDRES */
 #define LIS3L02DQ_REG_WAKE_UP_SRC_ADDR                  0x24
 /* top bit ignored */
-/* Interupt Active */
+/* Interrupt Active */
 #define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_ACTIVATED   0x40
 /* Interupts that have been triggered */
 #define LIS3L02DQ_REG_WAKE_UP_SRC_INTERRUPT_Z_HIGH      0x20
@@ -123,7 +123,7 @@
 #define LIS3L02DQ_REG_STATUS_X_NEW_DATA                 0x01
 
 /* The accelerometer readings - low and high bytes.
-Form of high byte dependant on justification set in ctrl reg */
+Form of high byte dependent on justification set in ctrl reg */
 #define LIS3L02DQ_REG_OUT_X_L_ADDR                      0x28
 #define LIS3L02DQ_REG_OUT_X_H_ADDR                      0x29
 #define LIS3L02DQ_REG_OUT_Y_L_ADDR                      0x2A
@@ -155,7 +155,7 @@ Form of high byte dependant on justification set in ctrl reg */
  * @inter:              used to check if new interrupt has been triggered
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct lis3l02dq_state {
diff --git a/drivers/staging/iio/accel/lis3l02dq_core.c b/drivers/staging/iio/accel/lis3l02dq_core.c
index c4b4ab7e642..3067f9662d2 100644
--- a/drivers/staging/iio/accel/lis3l02dq_core.c
+++ b/drivers/staging/iio/accel/lis3l02dq_core.c
@@ -77,7 +77,7 @@ int lis3l02dq_spi_read_reg_8(struct device *dev, u8 reg_address, u8 *val)
 /**
  * lis3l02dq_spi_write_reg_8() - write single byte to a register
  * @dev: device associated with child of actual device (iio_dev or iio_trig)
- * @reg_address: the address of the register to be writen
+ * @reg_address: the address of the register to be written
  * @val: the value to write
  **/
 int lis3l02dq_spi_write_reg_8(struct device *dev,
diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c
index 2c461a31f12..529a3cc6d0c 100644
--- a/drivers/staging/iio/accel/lis3l02dq_ring.c
+++ b/drivers/staging/iio/accel/lis3l02dq_ring.c
@@ -217,7 +217,7 @@ static const u8 read_all_tx_array[] = {
 /**
  * lis3l02dq_read_all() Reads all channels currently selected
  * @st:         device specific state
- * @rx_array:   (dma capable) recieve array, must be at least
+ * @rx_array:   (dma capable) receive array, must be at least
  *              4*number of channels
  **/
 static int lis3l02dq_read_all(struct lis3l02dq_state *st, u8 *rx_array)
@@ -409,7 +409,7 @@ static const struct attribute_group lis3l02dq_trigger_attr_group = {
  *
  * As the trigger may occur on any data element being updated it is
  * really rather likely to occur during the read from the previous
- * trigger event.  The only way to discover if this has occured on
+ * trigger event.  The only way to discover if this has occurred on
  * boards not supporting level interrupts is to take a look at the line.
  * If it is indicating another interrupt and we don't seem to have a
  * handler looking at it, then we need to notify the core that we need
diff --git a/drivers/staging/iio/accel/sca3000.h b/drivers/staging/iio/accel/sca3000.h
index 23892848f5a..db710334b99 100644
--- a/drivers/staging/iio/accel/sca3000.h
+++ b/drivers/staging/iio/accel/sca3000.h
@@ -185,7 +185,7 @@ struct sca3000_state {
 };
 
 /**
- * struct sca3000_chip_info - model dependant parameters
+ * struct sca3000_chip_info - model dependent parameters
  * @name:                       model identification
  * @scale:                      string containing floating point scale factor
  * @temp_output:                some devices have temperature sensors.
@@ -213,7 +213,7 @@ struct sca3000_chip_info {
  * sca3000_read_data() read a series of values from the device
  * @dev:                device
  * @reg_address_high:   start address (decremented read)
- * @rx:                 pointer where recieved data is placed. Callee
+ * @rx:                 pointer where received data is placed. Callee
  *                      responsible for freeing this.
  * @len:                number of bytes to read
  *
diff --git a/drivers/staging/iio/accel/sca3000_ring.c b/drivers/staging/iio/accel/sca3000_ring.c
index c872fddfb2b..a730a7638de 100644
--- a/drivers/staging/iio/accel/sca3000_ring.c
+++ b/drivers/staging/iio/accel/sca3000_ring.c
@@ -43,7 +43,7 @@
  *                      leading byte used in bus comms.
  *
  * Currently does not provide timestamps.  As the hardware doesn't add them they
- * can only be inferred aproximately from ring buffer events such as 50% full
+ * can only be inferred approximately from ring buffer events such as 50% full
  * and knowledge of when buffer was last emptied.  This is left to userspace.
  **/
 static int sca3000_rip_hw_rb(struct iio_ring_buffer *r,
diff --git a/drivers/staging/iio/adc/ad7298_ring.c b/drivers/staging/iio/adc/ad7298_ring.c
index 19d1aced1e6..9068d7f54d1 100644
--- a/drivers/staging/iio/adc/ad7298_ring.c
+++ b/drivers/staging/iio/adc/ad7298_ring.c
@@ -157,7 +157,7 @@ static int ad7298_ring_preenable(struct iio_dev *indio_dev)
 /**
  * ad7298_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on spi comms occuring, leave timestamping until
+ * As sampling only occurs on spi comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/ad7476_ring.c b/drivers/staging/iio/adc/ad7476_ring.c
index 1d654c86099..92d93787d5b 100644
--- a/drivers/staging/iio/adc/ad7476_ring.c
+++ b/drivers/staging/iio/adc/ad7476_ring.c
@@ -112,7 +112,7 @@ static int ad7476_ring_preenable(struct iio_dev *indio_dev)
 /**
  * ad7476_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on i2c comms occuring, leave timestamping until
+ * As sampling only occurs on i2c comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/ad7887_ring.c b/drivers/staging/iio/adc/ad7887_ring.c
index 2d7fe65049d..da77f266c16 100644
--- a/drivers/staging/iio/adc/ad7887_ring.c
+++ b/drivers/staging/iio/adc/ad7887_ring.c
@@ -165,7 +165,7 @@ static int ad7887_ring_postdisable(struct iio_dev *indio_dev)
 /**
  * ad7887_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on spi comms occuring, leave timestamping until
+ * As sampling only occurs on spi comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
index e50841b3ac6..f04e642e727 100644
--- a/drivers/staging/iio/adc/ad799x_core.c
+++ b/drivers/staging/iio/adc/ad799x_core.c
@@ -184,7 +184,7 @@ static ssize_t ad799x_read_single_channel(struct device *dev,
 
         mutex_lock(&dev_info->mlock);
         mask = 1 << this_attr->address;
-        /* If ring buffer capture is occuring, query the buffer */
+        /* If ring buffer capture is occurring, query the buffer */
         if (iio_ring_enabled(dev_info)) {
                 data = ret = ad799x_single_channel_from_ring(st, mask);
                 if (ret < 0)
diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
index 56abc395f17..0875a7ef67a 100644
--- a/drivers/staging/iio/adc/ad799x_ring.c
+++ b/drivers/staging/iio/adc/ad799x_ring.c
@@ -101,7 +101,7 @@ static int ad799x_ring_preenable(struct iio_dev *indio_dev)
 /**
  * ad799x_poll_func_th() th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on i2c comms occuring, leave timestamping until
+ * As sampling only occurs on i2c comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/adc/max1363_core.c b/drivers/staging/iio/adc/max1363_core.c
index dde097afb43..de83c3b37a2 100644
--- a/drivers/staging/iio/adc/max1363_core.c
+++ b/drivers/staging/iio/adc/max1363_core.c
@@ -255,7 +255,7 @@ static ssize_t max1363_read_single_channel(struct device *dev,
                 goto error_ret;
         }
 
-        /* If ring buffer capture is occuring, query the buffer */
+        /* If ring buffer capture is occurring, query the buffer */
         if (iio_ring_enabled(dev_info)) {
                 mask = max1363_mode_table[this_attr->address].modemask;
                 data = max1363_single_channel_from_ring(mask, st);
@@ -1425,7 +1425,7 @@ error_ret:
 }
 
 /*
- * To keep this managable we always use one of 3 scan modes.
+ * To keep this manageable we always use one of 3 scan modes.
  * Scan 0...3, 0-1,2-3 and 1-0,3-2
  */
 static inline int __max1363_check_event_mask(int thismask, int checkmask)
diff --git a/drivers/staging/iio/adc/max1363_ring.c b/drivers/staging/iio/adc/max1363_ring.c
index 5532f3e466b..d36fcc62e97 100644
--- a/drivers/staging/iio/adc/max1363_ring.c
+++ b/drivers/staging/iio/adc/max1363_ring.c
@@ -108,7 +108,7 @@ static int max1363_ring_preenable(struct iio_dev *indio_dev)
 /**
  * max1363_poll_func_th() - th of trigger launched polling to ring buffer
  *
- * As sampling only occurs on i2c comms occuring, leave timestamping until
+ * As sampling only occurs on i2c comms occurring, leave timestamping until
  * then.  Some triggers will generate their own time stamp.  Currently
  * there is no way of notifying them when no one cares.
  **/
diff --git a/drivers/staging/iio/chrdev.h b/drivers/staging/iio/chrdev.h
index 98d1a2c12df..4fcb99c816f 100644
--- a/drivers/staging/iio/chrdev.h
+++ b/drivers/staging/iio/chrdev.h
@@ -33,7 +33,7 @@ struct iio_handler {
 /**
  * struct iio_event_data - The actual event being pushed to userspace
  * @id:         event identifier
- * @timestamp:  best estimate of time of event occurance (often from
+ * @timestamp:  best estimate of time of event occurrence (often from
  *              the interrupt handler)
  */
 struct iio_event_data {
@@ -42,7 +42,7 @@ struct iio_event_data {
 };
 
 /**
- * struct iio_detected_event_list - list element for events that have occured
+ * struct iio_detected_event_list - list element for events that have occurred
  * @list:               linked list header
  * @ev:                 the event itself
  * @shared_pointer:     used when the event is shared - i.e. can be escallated
@@ -98,7 +98,7 @@ struct iio_event_interface {
  * @list:               list header
  * @refcount:           as the handler may be shared between multiple device
  *                      side events, reference counting ensures clean removal
- * @exist_lock:         prevents race conditions related to refcount useage.
+ * @exist_lock:         prevents race conditions related to refcount usage.
  * @handler:            event handler function - called on event if this
  *                      event_handler is enabled.
  *
diff --git a/drivers/staging/iio/gyro/adis16060_core.c b/drivers/staging/iio/gyro/adis16060_core.c
index 700eb3980f9..ae53e71d1c2 100644
--- a/drivers/staging/iio/gyro/adis16060_core.c
+++ b/drivers/staging/iio/gyro/adis16060_core.c
@@ -30,7 +30,7 @@
  * @us_w:               actual spi_device to write config
  * @us_r:               actual spi_device to read back data
  * @indio_dev:          industrial I/O device structure
- * @buf:                transmit or recieve buffer
+ * @buf:                transmit or receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16060_state {
diff --git a/drivers/staging/iio/gyro/adis16080_core.c b/drivers/staging/iio/gyro/adis16080_core.c
index fb4336c7d2a..ef9e304a226 100644
--- a/drivers/staging/iio/gyro/adis16080_core.c
+++ b/drivers/staging/iio/gyro/adis16080_core.c
@@ -35,7 +35,7 @@
  * struct adis16080_state - device instance specific data
  * @us:                 actual spi_device to write data
  * @indio_dev:          industrial I/O device structure
- * @buf:                transmit or recieve buffer
+ * @buf:                transmit or receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16080_state {
diff --git a/drivers/staging/iio/gyro/adis16260.h b/drivers/staging/iio/gyro/adis16260.h
index c1fd4364287..1369501b409 100644
--- a/drivers/staging/iio/gyro/adis16260.h
+++ b/drivers/staging/iio/gyro/adis16260.h
@@ -91,7 +91,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  * @negate:             negate the scale parameter
  **/
diff --git a/drivers/staging/iio/iio.h b/drivers/staging/iio/iio.h
index 248bdd2846f..7127f26f8d2 100644
--- a/drivers/staging/iio/iio.h
+++ b/drivers/staging/iio/iio.h
@@ -92,7 +92,7 @@ void iio_remove_event_from_list(struct iio_event_handler_list *el,
  *                      changes
  * @available_scan_masks: [DRIVER] optional array of allowed bitmasks
  * @trig:               [INTERN] current device trigger (ring buffer modes)
- * @pollfunc:           [DRIVER] function run on trigger being recieved
+ * @pollfunc:           [DRIVER] function run on trigger being received
  **/
 struct iio_dev {
         int                             id;
diff --git a/drivers/staging/iio/imu/adis16300.h b/drivers/staging/iio/imu/adis16300.h
index 1f25d68064a..c0957591aed 100644
--- a/drivers/staging/iio/imu/adis16300.h
+++ b/drivers/staging/iio/imu/adis16300.h
@@ -99,7 +99,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16300_state {
diff --git a/drivers/staging/iio/imu/adis16350.h b/drivers/staging/iio/imu/adis16350.h
index b00001e3edd..b1ad48662a2 100644
--- a/drivers/staging/iio/imu/adis16350.h
+++ b/drivers/staging/iio/imu/adis16350.h
@@ -105,7 +105,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16350_state {
diff --git a/drivers/staging/iio/imu/adis16400.h b/drivers/staging/iio/imu/adis16400.h
index 6ff33e1ad8c..7a127029e09 100644
--- a/drivers/staging/iio/imu/adis16400.h
+++ b/drivers/staging/iio/imu/adis16400.h
@@ -131,7 +131,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct adis16400_state {
diff --git a/drivers/staging/iio/industrialio-core.c b/drivers/staging/iio/industrialio-core.c
index f3bf111f354..1795ee1e820 100644
--- a/drivers/staging/iio/industrialio-core.c
+++ b/drivers/staging/iio/industrialio-core.c
@@ -258,7 +258,7 @@ static ssize_t iio_event_chrdev_read(struct file *filep,
                                                            ->det_events.list));
                 if (ret)
                         goto error_ret;
-                /* Single access device so noone else can get the data */
+                /* Single access device so no one else can get the data */
                 mutex_lock(&ev_int->event_list_lock);
         }
 
diff --git a/drivers/staging/iio/meter/ade7753.h b/drivers/staging/iio/meter/ade7753.h
index 70dabae6efe..3b9c7f6a50e 100644
--- a/drivers/staging/iio/meter/ade7753.h
+++ b/drivers/staging/iio/meter/ade7753.h
@@ -62,7 +62,7 @@
  * @us:                 actual spi_device
  * @indio_dev:          industrial I/O device structure
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct ade7753_state {
diff --git a/drivers/staging/iio/meter/ade7754.h b/drivers/staging/iio/meter/ade7754.h
index 8faa9b3b48b..0aa0522a33a 100644
--- a/drivers/staging/iio/meter/ade7754.h
+++ b/drivers/staging/iio/meter/ade7754.h
@@ -80,7 +80,7 @@
  * @us:                 actual spi_device
  * @indio_dev:          industrial I/O device structure
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct ade7754_state {
diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h
index df5bb7ba5a0..c6fd94f3b3e 100644
--- a/drivers/staging/iio/meter/ade7758.h
+++ b/drivers/staging/iio/meter/ade7758.h
@@ -98,7 +98,7 @@
  * @indio_dev:          industrial I/O device structure
  * @trig:               data ready trigger registered with iio
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct ade7758_state {
diff --git a/drivers/staging/iio/meter/ade7759.h b/drivers/staging/iio/meter/ade7759.h
index e9d1c43336f..cc76c2c4c03 100644
--- a/drivers/staging/iio/meter/ade7759.h
+++ b/drivers/staging/iio/meter/ade7759.h
@@ -43,7 +43,7 @@
  * @us:                 actual spi_device
  * @indio_dev:          industrial I/O device structure
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct ade7759_state {
diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h
index 4ad84a3bb46..79a21109f4e 100644
--- a/drivers/staging/iio/meter/ade7854.h
+++ b/drivers/staging/iio/meter/ade7854.h
@@ -149,7 +149,7 @@
  * @spi:                        actual spi_device
  * @indio_dev:          industrial I/O device structure
  * @tx:                 transmit buffer
- * @rx:                 recieve buffer
+ * @rx:                 receive buffer
  * @buf_lock:           mutex to protect tx and rx
  **/
 struct ade7854_state {
diff --git a/drivers/staging/iio/ring_generic.h b/drivers/staging/iio/ring_generic.h
index f21ac09373c..32948e55dc8 100644
--- a/drivers/staging/iio/ring_generic.h
+++ b/drivers/staging/iio/ring_generic.h
@@ -30,7 +30,7 @@ int iio_push_ring_event(struct iio_ring_buffer *ring_buf,
  * @event_code:         event indentification code
  * @timestamp:          time of event
  *
- * Typical usecase is to escalate a 50% ring full to 75% full if noone has yet
+ * Typical usecase is to escalate a 50% ring full to 75% full if no one has yet
  * read the first event. Clearly the 50% full is no longer of interest in
  * typical use case.
  **/
diff --git a/drivers/staging/intel_sst/TODO b/drivers/staging/intel_sst/TODO
index a24e5ed5689..c733d701109 100644
--- a/drivers/staging/intel_sst/TODO
+++ b/drivers/staging/intel_sst/TODO
@@ -1,7 +1,7 @@
 TODO
 ----
 
-Get the memrar driver cleaned up and upstream (dependancy blocking SST)
+Get the memrar driver cleaned up and upstream (dependency blocking SST)
 Replace long/short press with two virtual buttons
 Review the printks and kill off any left over ST_ERR: messages
 Review the misc device ioctls for 32/64bit safety and sanity
diff --git a/drivers/staging/intel_sst/intel_sst.c b/drivers/staging/intel_sst/intel_sst.c
index ce4a9f79ccd..81c24d19eb9 100644
--- a/drivers/staging/intel_sst/intel_sst.c
+++ b/drivers/staging/intel_sst/intel_sst.c
@@ -263,7 +263,7 @@ static int __devinit intel_sst_probe(struct pci_dev *pci,
         /* Init the device */
         ret = pci_enable_device(pci);
         if (ret) {
-                pr_err("device cant be enabled\n");
+                pr_err("device can't be enabled\n");
                 goto do_free_mem;
         }
         sst_drv_ctx->pci = pci_dev_get(pci);
@@ -453,7 +453,7 @@ int intel_sst_resume(struct pci_dev *pci)
         pci_restore_state(pci);
         ret = pci_enable_device(pci);
         if (ret)
-                pr_err("device cant be enabled\n");
+                pr_err("device can't be enabled\n");
 
         mutex_lock(&sst_drv_ctx->sst_lock);
         sst_drv_ctx->sst_state = SST_UN_INIT;
diff --git a/drivers/staging/intel_sst/intel_sst_app_interface.c b/drivers/staging/intel_sst/intel_sst_app_interface.c
index a367991d560..1d0621260ea 100644
--- a/drivers/staging/intel_sst/intel_sst_app_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_app_interface.c
@@ -236,7 +236,7 @@ int intel_sst_mmap(struct file *file_ptr, struct vm_area_struct *vma)
         if (!sst_drv_ctx->mmap_mem)
                 return -EIO;
 
-        /* round it up to the page bondary  */
+        /* round it up to the page boundary  */
         /*mem_area = (void *)((((unsigned long)sst_drv_ctx->mmap_mem)
                                 + PAGE_SIZE - 1) & PAGE_MASK);*/
         mem_area = (void *) PAGE_ALIGN((unsigned int) sst_drv_ctx->mmap_mem);
@@ -871,7 +871,7 @@ int sst_send_algo_ipc(struct ipc_post **msg)
 }
 
 /**
- * intel_sst_ioctl_dsp - recieves the device ioctl's
+ * intel_sst_ioctl_dsp - receives the device ioctl's
  *
  * @cmd:Ioctl cmd
  * @arg:data
@@ -1067,7 +1067,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
                         retval = -EFAULT;
                         break;
                 }
-                pr_debug("SET_VOLUME recieved for %d!\n",
+                pr_debug("SET_VOLUME received for %d!\n",
                                 set_vol.stream_id);
                 if (minor == STREAM_MODULE && set_vol.stream_id == 0) {
                         pr_debug("invalid operation!\n");
@@ -1085,7 +1085,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
                         retval = -EFAULT;
                         break;
                 }
-                pr_debug("IOCTL_GET_VOLUME recieved for stream = %d!\n",
+                pr_debug("IOCTL_GET_VOLUME received for stream = %d!\n",
                                 get_vol.stream_id);
                 if (minor == STREAM_MODULE && get_vol.stream_id == 0) {
                         pr_debug("invalid operation!\n");
@@ -1117,7 +1117,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
                         retval = -EFAULT;
                         break;
                 }
-                pr_debug("SNDRV_SST_SET_VOLUME recieved for %d!\n",
+                pr_debug("SNDRV_SST_SET_VOLUME received for %d!\n",
                         set_mute.stream_id);
                 if (minor == STREAM_MODULE && set_mute.stream_id == 0) {
                         retval = -EPERM;
@@ -1153,7 +1153,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
         case _IOC_NR(SNDRV_SST_MMAP_CAPTURE): {
                 struct snd_sst_mmap_buffs mmap_buf;
 
-                pr_debug("SNDRV_SST_MMAP_PLAY/CAPTURE recieved!\n");
+                pr_debug("SNDRV_SST_MMAP_PLAY/CAPTURE received!\n");
                 if (minor != STREAM_MODULE) {
                         retval = -EBADRQC;
                         break;
@@ -1239,7 +1239,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
         case _IOC_NR(SNDRV_SST_SET_TARGET_DEVICE): {
                 struct snd_sst_target_device target_device;
 
-                pr_debug("SET_TARGET_DEVICE recieved!\n");
+                pr_debug("SET_TARGET_DEVICE received!\n");
                 if (copy_from_user(&target_device, (void __user *)arg,
                                 sizeof(target_device))) {
                         retval = -EFAULT;
@@ -1256,7 +1256,7 @@ long intel_sst_ioctl(struct file *file_ptr, unsigned int cmd, unsigned long arg)
         case _IOC_NR(SNDRV_SST_DRIVER_INFO): {
                 struct snd_sst_driver_info info;
 
-                pr_debug("SNDRV_SST_DRIVER_INFO recived\n");
+                pr_debug("SNDRV_SST_DRIVER_INFO received\n");
                 info.version = SST_VERSION_NUM;
                 /* hard coding, shud get sumhow later */
                 info.active_pcm_streams = sst_drv_ctx->stream_cnt -
diff --git a/drivers/staging/intel_sst/intel_sst_drv_interface.c b/drivers/staging/intel_sst/intel_sst_drv_interface.c
index ea8e251b509..e9c18210824 100644
--- a/drivers/staging/intel_sst/intel_sst_drv_interface.c
+++ b/drivers/staging/intel_sst/intel_sst_drv_interface.c
@@ -315,7 +315,7 @@ int sst_open_pcm_stream(struct snd_sst_params *str_param)
         pm_runtime_get_sync(&sst_drv_ctx->pci->dev);
 
         if (sst_drv_ctx->sst_state == SST_SUSPENDED) {
-                /* LPE is suspended, resume it before proceding*/
+                /* LPE is suspended, resume it before proceeding*/
                 pr_debug("Resuming from Suspended state\n");
                 retval = intel_sst_resume(sst_drv_ctx->pci);
                 if (retval) {
diff --git a/drivers/staging/intel_sst/intel_sst_dsp.c b/drivers/staging/intel_sst/intel_sst_dsp.c
index 6e5c9152da9..bffe4c6e292 100644
--- a/drivers/staging/intel_sst/intel_sst_dsp.c
+++ b/drivers/staging/intel_sst/intel_sst_dsp.c
@@ -350,7 +350,7 @@ static int sst_download_library(const struct firmware *fw_lib,
 
 }
 
-/* This function is called befoer downloading the codec/postprocessing
+/* This function is called before downloading the codec/postprocessing
 library is set for download to SST DSP*/
 static int sst_validate_library(const struct firmware *fw_lib,
                 struct lib_slot_info *slot,
@@ -405,7 +405,7 @@ exit:
 
 }
 
-/* This function is called when FW requests for a particular libary download
+/* This function is called when FW requests for a particular library download
 This function prepares the library to download*/
 int sst_load_library(struct snd_sst_lib_download *lib, u8 ops)
 {
diff --git a/drivers/staging/intel_sst/intel_sst_fw_ipc.h b/drivers/staging/intel_sst/intel_sst_fw_ipc.h
index 8df313d10d2..0f0c5bbc5f4 100644
--- a/drivers/staging/intel_sst/intel_sst_fw_ipc.h
+++ b/drivers/staging/intel_sst/intel_sst_fw_ipc.h
@@ -111,7 +111,7 @@
 #define IPC_SST_PERIOD_ELAPSED 0x97 /* period elapsed */
 #define IPC_IA_TARGET_DEV_CHNGD 0x98 /* error in processing a stream */
 
-#define IPC_SST_ERROR_EVENT 0x99 /* Buffer over run occured */
+#define IPC_SST_ERROR_EVENT 0x99 /* Buffer over run occurred */
 /* L2S messages */
 #define IPC_SC_DDR_LINK_UP 0xC0
 #define IPC_SC_DDR_LINK_DOWN 0xC1
diff --git a/drivers/staging/intel_sst/intel_sst_stream.c b/drivers/staging/intel_sst/intel_sst_stream.c
index 795e42ab736..dd58be5b197 100644
--- a/drivers/staging/intel_sst/intel_sst_stream.c
+++ b/drivers/staging/intel_sst/intel_sst_stream.c
@@ -98,7 +98,7 @@ static unsigned int get_mrst_stream_id(void)
                 if (sst_drv_ctx->streams[i].status == STREAM_UN_INIT)
                         return i;
         }
-        pr_debug("Didnt find empty stream for mrst\n");
+        pr_debug("Didn't find empty stream for mrst\n");
         return -EBUSY;
 }
 
diff --git a/drivers/staging/intel_sst/intel_sst_stream_encoded.c b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
index 29753c7519a..d5f07b87882 100644
--- a/drivers/staging/intel_sst/intel_sst_stream_encoded.c
+++ b/drivers/staging/intel_sst/intel_sst_stream_encoded.c
@@ -914,7 +914,7 @@ static int sst_prepare_input_buffers_rar(struct stream_info *str_info,
                 (void *) ((unsigned long) rar_buffers.bus_address);
                 pr_debug("RAR buf addr in DnR (input buffer function)0x%lu",
                                  (unsigned long) str_info->decode_ibuf);
-                pr_debug("rar in DnR decode funtion/output b_add rar =0x%lu",
+                pr_debug("rar in DnR decode function/output b_add rar =0x%lu",
                                 (unsigned long) rar_buffers.bus_address);
                 *input_index = i + 1;
                 str_info->decode_isize = dbufs->ibufs->buff_entry[i].size;
diff --git a/drivers/staging/intel_sst/intelmid.c b/drivers/staging/intel_sst/intelmid.c
index fb229218670..d207636a7b6 100644
--- a/drivers/staging/intel_sst/intelmid.c
+++ b/drivers/staging/intel_sst/intelmid.c
@@ -773,7 +773,7 @@ static int __devinit snd_intelmad_sst_register(
                 if (ret_val)
                         return ret_val;
                 sst_card_vendor_id = (vendor_addr.value & (MASK2|MASK1|MASK0));
-                pr_debug("orginal n extrated vendor id = 0x%x %d\n",
+                pr_debug("original n extrated vendor id = 0x%x %d\n",
                                 vendor_addr.value, sst_card_vendor_id);
                 if (sst_card_vendor_id < 0 || sst_card_vendor_id > 2) {
                         pr_err("vendor card not supported!!\n");
diff --git a/drivers/staging/intel_sst/intelmid.h b/drivers/staging/intel_sst/intelmid.h
index ca881b790cb..e77da87e1df 100644
--- a/drivers/staging/intel_sst/intelmid.h
+++ b/drivers/staging/intel_sst/intelmid.h
@@ -90,7 +90,7 @@ struct mad_jack_msg_wq {
  * @card_index: sound card index
  * @card_id: sound card id detected
  * @sstdrv_ops: ptr to sst driver ops
- * @pdev: ptr to platfrom device
+ * @pdev: ptr to platform device
  * @irq: interrupt number detected
  * @pmic_status: Device status of sound card
  * @int_base: ptr to MMIO interrupt region
diff --git a/drivers/staging/keucr/init.c b/drivers/staging/keucr/init.c
index 5c01f28f073..8af7c84daee 100644
--- a/drivers/staging/keucr/init.c
+++ b/drivers/staging/keucr/init.c
@@ -90,7 +90,7 @@ int ENE_MSInit(struct us_data *us)
 
         result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0);
         if (result != USB_STOR_XFER_GOOD) {
-                printk(KERN_ERR "Exection MS Init Code Fail !!\n");
+                printk(KERN_ERR "Execution MS Init Code Fail !!\n");
                 return USB_STOR_TRANSPORT_ERROR;
         }
 
@@ -145,7 +145,7 @@ int ENE_SMInit(struct us_data *us)
         result = ENE_SendScsiCmd(us, FDIR_READ, &buf, 0);
         if (result != USB_STOR_XFER_GOOD) {
                 printk(KERN_ERR
-                       "Exection SM Init Code Fail !! result = %x\n", result);
+                       "Execution SM Init Code Fail !! result = %x\n", result);
                 return USB_STOR_TRANSPORT_ERROR;
         }
 
diff --git a/drivers/staging/keucr/smilmain.c b/drivers/staging/keucr/smilmain.c
index 2cbe9f897ee..95c688a5c95 100644
--- a/drivers/staging/keucr/smilmain.c
+++ b/drivers/staging/keucr/smilmain.c
@@ -64,7 +64,7 @@ extern struct SSFDCTYPE  Ssfdc;
 extern struct ADDRESS    Media;
 extern struct CIS_AREA   CisArea;
 
-//BIT Controll Macro
+//BIT Control Macro
 BYTE BitData[] = { 0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80 } ;
 #define Set_D_Bit(a,b)    (a[(BYTE)((b)/8)]|= BitData[(b)%8])
 #define Clr_D_Bit(a,b)    (a[(BYTE)((b)/8)]&=~BitData[(b)%8])
@@ -76,7 +76,7 @@ extern BYTE     IsXDCompliance;
 
 
 //
-////Power Controll & Media Exist Check Function
+////Power Control & Media Exist Check Function
 ////----- Init_D_SmartMedia() --------------------------------------------
 //int Init_D_SmartMedia(void)
 //{
@@ -575,7 +575,7 @@ int Media_D_OneSectWriteFlush(PFDO_DEVICE_EXTENSION fdoExt)
 //    return(SUCCESS);
 //}
 //
-////Power Controll & Media Exist Check Subroutine
+////Power Control & Media Exist Check Subroutine
 ////----- Initialize_D_Media() -------------------------------------------
 //void Initialize_D_Media(void)
 //{
@@ -738,7 +738,7 @@ int Check_D_MediaFmt(struct us_data *us)
 //    return(SUCCESS);
 //}
 */
-//SmartMedia Physical Address Controll Subroutine
+//SmartMedia Physical Address Control Subroutine
 //----- Conv_D_MediaAddr() ---------------------------------------------
 int Conv_D_MediaAddr(struct us_data *us, DWORD addr)
 {
diff --git a/drivers/staging/keucr/smilsub.c b/drivers/staging/keucr/smilsub.c
index 80da61c37bf..4fe47422eb7 100644
--- a/drivers/staging/keucr/smilsub.c
+++ b/drivers/staging/keucr/smilsub.c
@@ -57,7 +57,7 @@ extern WORD  WriteBlock;
 #define ODD                     1             // Odd Page for 256byte/page
 
 
-//SmartMedia Redundant buffer data Controll Subroutine
+//SmartMedia Redundant buffer data Control Subroutine
 //----- Check_D_DataBlank() --------------------------------------------
 int Check_D_DataBlank(BYTE *redundant)
 {
@@ -1367,7 +1367,7 @@ BYTE _Check_D_DevCode(BYTE dcode)
     }
 }
 /*
-////SmartMedia Power Controll Subroutine
+////SmartMedia Power Control Subroutine
 ////----- Cnt_D_Reset() ----------------------------------------------
 //void Cnt_D_Reset(void)
 //{
@@ -1478,7 +1478,7 @@ BYTE _Check_D_DevCode(BYTE dcode)
 //}
 //
 */
-//SmartMedia ECC Controll Subroutine
+//SmartMedia ECC Control Subroutine
 //----- Check_D_ReadError() ----------------------------------------------
 int Check_D_ReadError(BYTE *redundant)
 {
diff --git a/drivers/staging/lirc/lirc_ene0100.h b/drivers/staging/lirc/lirc_ene0100.h
index 776b693bb30..06bebd6acc4 100644
--- a/drivers/staging/lirc/lirc_ene0100.h
+++ b/drivers/staging/lirc/lirc_ene0100.h
@@ -81,7 +81,7 @@
 
 /* CIR block settings */
 #define ENE_CIR_CONF1           0xFEC0
-#define ENE_CIR_CONF1_ADC_ON    0x7      /* reciever on gpio40 enabled */
+#define ENE_CIR_CONF1_ADC_ON    0x7      /* receiver on gpio40 enabled */
 #define ENE_CIR_CONF1_LEARN1    (1 << 3) /* enabled on learning mode */
 #define ENE_CIR_CONF1_TX_ON     0x30     /* enabled on transmit */
 #define ENE_CIR_CONF1_TX_CARR   (1 << 7) /* send TX carrier or not */
@@ -96,7 +96,7 @@
 
 /* transmitter - not implemented yet */
 /* KB3926C and higher */
-/* transmission is very similiar to recieving, a byte is written to */
+/* transmission is very similar to receiving, a byte is written to */
 /* ENE_TX_INPUT, in same manner as it is read from sample buffer */
 /* sample period is fixed*/
 
diff --git a/drivers/staging/memrar/memrar_handler.c b/drivers/staging/memrar/memrar_handler.c
index cfcaa8e5b8e..1d9399d6f10 100644
--- a/drivers/staging/memrar/memrar_handler.c
+++ b/drivers/staging/memrar/memrar_handler.c
@@ -690,7 +690,7 @@ static int memrar_mmap(struct file *filp, struct vm_area_struct *vma)
  *      @inode: inode to open
  *      @filp: file handle
  *
- *      As we support multiple arbitary opens there is no work to be done
+ *      As we support multiple arbitrary opens there is no work to be done
  *      really.
  */
 
diff --git a/drivers/staging/msm/mdp4_overlay.c b/drivers/staging/msm/mdp4_overlay.c
index de284c28faa..b9acf529929 100644
--- a/drivers/staging/msm/mdp4_overlay.c
+++ b/drivers/staging/msm/mdp4_overlay.c
@@ -696,7 +696,7 @@ void mdp4_mixer_stage_down(struct mdp4_overlay_pipe *pipe)
         stage = pipe->mixer_stage;
         mixer = pipe->mixer_num;
 
-        if (pipe != ctrl->stage[mixer][stage])  /* not runing */
+        if (pipe != ctrl->stage[mixer][stage])  /* not running */
                 return;
 
         /* MDP_LAYERMIXER_IN_CFG, shard by both mixer 0 and 1  */
diff --git a/drivers/staging/msm/mdp_ppp_dq.c b/drivers/staging/msm/mdp_ppp_dq.c
index 3dc1c0cc61f..3a687c7a569 100644
--- a/drivers/staging/msm/mdp_ppp_dq.c
+++ b/drivers/staging/msm/mdp_ppp_dq.c
@@ -200,7 +200,7 @@ static void mdp_ppp_flush_dirty_djobs(void *cond)
                 msm_fb_ensure_mem_coherency_after_dma(job->info, &job->req, 1);
 
                 /* Schedule jobs for cleanup
-                 * A seperate worker thread does this */
+                 * A separate worker thread does this */
                 queue_delayed_work(mdp_ppp_djob_clnr, &job->cleaner,
                         mdp_timer_duration);
         }
diff --git a/drivers/staging/msm/msm_fb.c b/drivers/staging/msm/msm_fb.c
index a2f29d46405..e7ef836eb8d 100644
--- a/drivers/staging/msm/msm_fb.c
+++ b/drivers/staging/msm/msm_fb.c
@@ -859,7 +859,7 @@ static int msm_fb_register(struct msm_fb_data_type *mfd)
                 break;
 
         default:
-                MSM_FB_ERR("msm_fb_init: fb %d unkown image type!\n",
+                MSM_FB_ERR("msm_fb_init: fb %d unknown image type!\n",
                            mfd->index);
                 return ret;
         }
@@ -1793,9 +1793,9 @@ static int msmfb_async_blit(struct fb_info *info, void __user *p)
 /*
  * NOTE: The userspace issues blit operations in a sequence, the sequence
  * start with a operation marked START and ends in an operation marked
- * END. It is guranteed by the userspace that all the blit operations
+ * END. It is guaranteed by the userspace that all the blit operations
  * between START and END are only within the regions of areas designated
- * by the START and END operations and that the userspace doesnt modify
+ * by the START and END operations and that the userspace doesn't modify
  * those areas. Hence it would be enough to perform barrier/cache operations
  * only on the START and END operations.
  */
diff --git a/drivers/staging/octeon/cvmx-cmd-queue.h b/drivers/staging/octeon/cvmx-cmd-queue.h
index 59d22142229..614653b686a 100644
--- a/drivers/staging/octeon/cvmx-cmd-queue.h
+++ b/drivers/staging/octeon/cvmx-cmd-queue.h
@@ -214,7 +214,7 @@ static inline int __cvmx_cmd_queue_get_index(cvmx_cmd_queue_id_t queue_id)
         /*
          * Warning: This code currently only works with devices that
          * have 256 queues or less. Devices with more than 16 queues
-         * are layed out in memory to allow cores quick access to
+         * are laid out in memory to allow cores quick access to
          * every 16th queue. This reduces cache thrashing when you are
          * running 16 queues per port to support lockless operation.
          */
diff --git a/drivers/staging/octeon/cvmx-fpa.h b/drivers/staging/octeon/cvmx-fpa.h
index 50a8c91778f..1f04f965873 100644
--- a/drivers/staging/octeon/cvmx-fpa.h
+++ b/drivers/staging/octeon/cvmx-fpa.h
@@ -195,7 +195,7 @@ static inline void cvmx_fpa_async_alloc(uint64_t scr_addr, uint64_t pool)
         cvmx_fpa_iobdma_data_t data;
 
         /*
-         * Hardware only uses 64 bit alligned locations, so convert
+         * Hardware only uses 64 bit aligned locations, so convert
          * from byte address to 64-bit index
          */
         data.s.scraddr = scr_addr >> 3;
diff --git a/drivers/staging/octeon/cvmx-helper-board.h b/drivers/staging/octeon/cvmx-helper-board.h
index 611a8e03c21..b465bec4355 100644
--- a/drivers/staging/octeon/cvmx-helper-board.h
+++ b/drivers/staging/octeon/cvmx-helper-board.h
@@ -81,7 +81,7 @@ extern int cvmx_helper_board_get_mii_address(int ipd_port);
  * @phy_addr:  The address of the PHY to program
  * @link_flags:
  *                  Flags to control autonegotiation.  Bit 0 is autonegotiation
- *                  enable/disable to maintain backware compatability.
+ *                  enable/disable to maintain backware compatibility.
  * @link_info: Link speed to program. If the speed is zero and autonegotiation
  *                  is enabled, all possible negotiation speeds are advertised.
  *
diff --git a/drivers/staging/octeon/cvmx-helper-util.c b/drivers/staging/octeon/cvmx-helper-util.c
index 41ef8a40bb0..131182bf5ab 100644
--- a/drivers/staging/octeon/cvmx-helper-util.c
+++ b/drivers/staging/octeon/cvmx-helper-util.c
@@ -362,7 +362,7 @@ int __cvmx_helper_setup_gmx(int interface, int num_ports)
 }
 
 /**
- * Returns the IPD/PKO port number for a port on teh given
+ * Returns the IPD/PKO port number for a port on the given
  * interface.
  *
  * @interface: Interface to use
diff --git a/drivers/staging/octeon/cvmx-helper.c b/drivers/staging/octeon/cvmx-helper.c
index 591506643d0..e9c5c836cef 100644
--- a/drivers/staging/octeon/cvmx-helper.c
+++ b/drivers/staging/octeon/cvmx-helper.c
@@ -691,7 +691,7 @@ int __cvmx_helper_errata_fix_ipd_ptr_alignment(void)
 
                 if (!retry_cnt)
                         cvmx_dprintf("WARNING: FIX_IPD_PTR_ALIGNMENT "
-                                     "get_work() timeout occured.\n");
+                                     "get_work() timeout occurred.\n");
 
                 /* Free packet */
                 if (work)
diff --git a/drivers/staging/octeon/cvmx-mdio.h b/drivers/staging/octeon/cvmx-mdio.h
index f45dc49512f..d88ab8d8e37 100644
--- a/drivers/staging/octeon/cvmx-mdio.h
+++ b/drivers/staging/octeon/cvmx-mdio.h
@@ -254,7 +254,7 @@ typedef union {
 #define MDIO_CLAUSE_45_READ_INC 2
 #define MDIO_CLAUSE_45_READ     3
 
-/* MMD identifiers, mostly for accessing devices withing XENPAK modules. */
+/* MMD identifiers, mostly for accessing devices within XENPAK modules. */
 #define CVMX_MMD_DEVICE_PMA_PMD      1
 #define CVMX_MMD_DEVICE_WIS          2
 #define CVMX_MMD_DEVICE_PCS          3
diff --git a/drivers/staging/octeon/cvmx-pko.h b/drivers/staging/octeon/cvmx-pko.h
index f068c198249..de3412aada5 100644
--- a/drivers/staging/octeon/cvmx-pko.h
+++ b/drivers/staging/octeon/cvmx-pko.h
@@ -98,7 +98,7 @@ typedef enum {
         /*
          * PKO doesn't do any locking. It is the responsibility of the
          * application to make sure that no other core is accessing
-         * the same queue at the smae time
+         * the same queue at the same time
          */
         CVMX_PKO_LOCK_NONE = 0,
         /*
@@ -324,7 +324,7 @@ static inline void cvmx_pko_doorbell(uint64_t port, uint64_t queue,
  * - CVMX_PKO_LOCK_NONE
  *      - PKO doesn't do any locking. It is the responsibility
  *          of the application to make sure that no other core
- *          is accessing the same queue at the smae time.
+ *          is accessing the same queue at the same time.
  * - CVMX_PKO_LOCK_ATOMIC_TAG
  *      - PKO performs an atomic tagswitch to insure exclusive
  *          access to the output queue. This will maintain
diff --git a/drivers/staging/octeon/cvmx-pow.h b/drivers/staging/octeon/cvmx-pow.h
index bf9e069a898..999aefe3274 100644
--- a/drivers/staging/octeon/cvmx-pow.h
+++ b/drivers/staging/octeon/cvmx-pow.h
@@ -1492,8 +1492,8 @@ static inline void cvmx_pow_tag_sw_full(cvmx_wqe_t *wqp, uint32_t tag,
 /**
  * Switch to a NULL tag, which ends any ordering or
  * synchronization provided by the POW for the current
- * work queue entry.  This operation completes immediatly,
- * so completetion should not be waited for.
+ * work queue entry.  This operation completes immediately,
+ * so completion should not be waited for.
  * This function does NOT wait for previous tag switches to complete,
  * so the caller must ensure that any previous tag switches have completed.
  */
@@ -1532,8 +1532,8 @@ static inline void cvmx_pow_tag_sw_null_nocheck(void)
 /**
  * Switch to a NULL tag, which ends any ordering or
  * synchronization provided by the POW for the current
- * work queue entry.  This operation completes immediatly,
- * so completetion should not be waited for.
+ * work queue entry.  This operation completes immediately,
+ * so completion should not be waited for.
  * This function waits for any pending tag switches to complete
  * before requesting the switch to NULL.
  */
@@ -1672,7 +1672,7 @@ static inline void cvmx_pow_set_priority(uint64_t core_num,
 
 /**
  * Performs a tag switch and then an immediate deschedule. This completes
- * immediatly, so completion must not be waited for.  This function does NOT
+ * immediately, so completion must not be waited for.  This function does NOT
  * update the wqe in DRAM to match arguments.
  *
  * This function does NOT wait for any prior tag switches to complete, so the
@@ -1758,7 +1758,7 @@ static inline void cvmx_pow_tag_sw_desched_nocheck(
 
 /**
  * Performs a tag switch and then an immediate deschedule. This completes
- * immediatly, so completion must not be waited for.  This function does NOT
+ * immediately, so completion must not be waited for.  This function does NOT
  * update the wqe in DRAM to match arguments.
  *
  * This function waits for any prior tag switches to complete, so the
diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h
index 23467563fe5..c745a72a059 100644
--- a/drivers/staging/octeon/ethernet-util.h
+++ b/drivers/staging/octeon/ethernet-util.h
@@ -55,7 +55,7 @@ static inline int INTERFACE(int ipd_port)
                 return 2;
         else if (ipd_port < 40) /* Interface 3 for loopback */
                 return 3;
-        else if (ipd_port == 40)        /* Non existant interface for POW0 */
+        else if (ipd_port == 40)        /* Non existent interface for POW0 */
                 return 4;
         else
                 panic("Illegal ipd_port %d passed to INTERFACE\n", ipd_port);
diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
index b154be7a2fe..b5d21f6497f 100644
--- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
+++ b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
@@ -80,7 +80,7 @@ static int dcon_init_xo_1(struct dcon_priv *dcon)
         lob &= ~(1 << DCON_IRQ);
         outb(lob, 0x4d0);
 
-        /* Register the interupt handler */
+        /* Register the interrupt handler */
         if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) {
                 printk(KERN_ERR "olpc-dcon: failed to request DCON's irq\n");
                 goto err_req_irq;
diff --git a/drivers/staging/pohmelfs/crypto.c b/drivers/staging/pohmelfs/crypto.c
index 6540864216c..5cca24fcf6c 100644
--- a/drivers/staging/pohmelfs/crypto.c
+++ b/drivers/staging/pohmelfs/crypto.c
@@ -745,7 +745,7 @@ static int pohmelfs_crypto_init_handshake(struct pohmelfs_sb *psb)
 
         /*
          * At this point NETFS_CAPABILITIES response command
-         * should setup superblock in a way, which is acceptible
+         * should setup superblock in a way, which is acceptable
          * for both client and server, so if server refuses connection,
          * it will send error in transaction response.
          */
diff --git a/drivers/staging/quatech_usb2/quatech_usb2.c b/drivers/staging/quatech_usb2/quatech_usb2.c
index c45b09ed0d3..ca098cabc2b 100644
--- a/drivers/staging/quatech_usb2/quatech_usb2.c
+++ b/drivers/staging/quatech_usb2/quatech_usb2.c
@@ -148,7 +148,7 @@ static struct usb_driver quausb2_usb_driver = {
  * value of the line status flags from the port
  * @shadowMSR: Last received state of the modem status register, holds
  * the value of the modem status received from the port
- * @rcv_flush: Flag indicating that a receive flush has occured on
+ * @rcv_flush: Flag indicating that a receive flush has occurred on
  * the hardware.
  * @xmit_flush: Flag indicating that a transmit flush has been processed by
  * the hardware.
@@ -156,7 +156,7 @@ static struct usb_driver quausb2_usb_driver = {
  * includes the size (excluding header) of URBs that have been submitted but
  * have not yet been sent to to the device, and bytes that have been sent out
  * of the port but not yet reported sent by the "xmit_empty" messages (which
- * indicate the number of bytes sent each time they are recieved, despite the
+ * indicate the number of bytes sent each time they are received, despite the
  * misleading name).
  * - Starts at zero when port is initialised.
  * - is incremented by the size of the data to be written (no headers)
@@ -649,7 +649,7 @@ static void qt2_close(struct usb_serial_port *port)
         /* although the USB side is now empty, the UART itself may
          * still be pushing characters out over the line, so we have to
          * wait testing the actual line status until the lines change
-         * indicating that the data is done transfering. */
+         * indicating that the data is done transferring. */
         /* FIXME: slow this polling down so it doesn't run the USB bus flat out
          * if it actually has to spend any time in this loop (which it normally
          * doesn't because the buffer is nearly empty) */
@@ -726,7 +726,7 @@ static int qt2_write(struct tty_struct *tty, struct usb_serial_port *port,
                 return 0;
         } else if (port_extra->tx_pending_bytes >= QT2_FIFO_DEPTH) {
                 /* buffer is full (==). > should not occur, but would indicate
-                 * that an overflow had occured */
+                 * that an overflow had occurred */
                 dbg("%s(): port transmit buffer is full!", __func__);
                 /* schedule_work(&port->work); commented in vendor driver */
                 return 0;
@@ -823,7 +823,7 @@ static int qt2_write_room(struct tty_struct *tty)
          * reduce the free space count by the size of the dispatched write.
          * When a "transmit empty" message comes back up the USB read stream,
          * we decrement the count by the number of bytes reported sent, thus
-         * keeping track of the difference between sent and recieved bytes.
+         * keeping track of the difference between sent and received bytes.
          */
 
         room = (QT2_FIFO_DEPTH - port_extra->tx_pending_bytes);
@@ -1795,7 +1795,7 @@ static void qt2_process_rx_char(struct usb_serial_port *port,
         }
 }
 
-/** @brief Retreive the value of a register from the device
+/** @brief Retrieve the value of a register from the device
  *
  * Issues a GET_REGISTER vendor-spcific request over the USB control
  * pipe to obtain a value back from a specific register on a specific
diff --git a/drivers/staging/rt2860/chip/rtmp_phy.h b/drivers/staging/rt2860/chip/rtmp_phy.h
index 98454df30a2..a52221f1294 100644
--- a/drivers/staging/rt2860/chip/rtmp_phy.h
+++ b/drivers/staging/rt2860/chip/rtmp_phy.h
@@ -467,7 +467,7 @@
                         DBGPRINT_ERR("BBP write R%d=0x%x fail. BusyCnt= %d.bPCIclkOff = %d. \n", _I, BbpCsr.word, BusyCnt, (_A)->bPCIclkOff);   \
                 }                                                                                                                                       \
         } else {                                                        \
-                DBGPRINT_ERR("****** BBP_Write_Latch Buffer exceeds max boundry ****** \n");    \
+                DBGPRINT_ERR("****** BBP_Write_Latch Buffer exceeds max boundary ****** \n");   \
         }                                                                                                                                               \
 }
 #endif /* RTMP_MAC_PCI // */
diff --git a/drivers/staging/rt2860/common/ba_action.c b/drivers/staging/rt2860/common/ba_action.c
index 62f6f6be4ac..133bc1b87d2 100644
--- a/drivers/staging/rt2860/common/ba_action.c
+++ b/drivers/staging/rt2860/common/ba_action.c
@@ -28,7 +28,7 @@
 #include "../rt_config.h"
 #include <linux/kernel.h>
 
-#define BA_ORI_INIT_SEQ         (pEntry->TxSeq[TID])    /*1                        // inital sequence number of BA session */
+#define BA_ORI_INIT_SEQ         (pEntry->TxSeq[TID])    /*1                        // initial sequence number of BA session */
 
 #define ORI_SESSION_MAX_RETRY   8
 #define ORI_BA_SESSION_TIMEOUT  (2000)  /* ms */
@@ -1487,7 +1487,7 @@ static void ba_enqueue_reordering_packet(struct rt_rtmp_adapter *pAd,
 
                 /*
                  * flush all pending reordering mpdus
-                 * and receving mpdu to upper layer
+                 * and receiving mpdu to upper layer
                  * make tcp/ip to take care reordering mechanism
                  */
                 /*ba_refresh_reordering_mpdus(pAd, pBAEntry); */
diff --git a/drivers/staging/rt2860/common/cmm_aes.c b/drivers/staging/rt2860/common/cmm_aes.c
index a99879bada4..d70d229a6e5 100644
--- a/drivers/staging/rt2860/common/cmm_aes.c
+++ b/drivers/staging/rt2860/common/cmm_aes.c
@@ -858,7 +858,7 @@ static uint32 KT1[256];
 static uint32 KT2[256];
 static uint32 KT3[256];
 
-/* platform-independant 32-bit integer manipulation     macros */
+/* platform-independent 32-bit integer manipulation     macros */
 
 #define GET_UINT32(n,b,i)                                               \
 {                                                                                               \
diff --git a/drivers/staging/rt2860/common/cmm_cfg.c b/drivers/staging/rt2860/common/cmm_cfg.c
index 24f43937843..727f7992925 100644
--- a/drivers/staging/rt2860/common/cmm_cfg.c
+++ b/drivers/staging/rt2860/common/cmm_cfg.c
@@ -223,7 +223,7 @@ int RT_CfgSetWepKey(struct rt_rtmp_adapter *pAd,
         pAdapter        Pointer to our adapter
         keyString       WPA pre-shared key string
         pHashStr        String used for password hash function
-        hashStrLen      Lenght of the hash string
+        hashStrLen      Length of the hash string
         pPMKBuf         Output buffer of WPAPSK key
 
     Return:
diff --git a/drivers/staging/rt2860/common/cmm_data.c b/drivers/staging/rt2860/common/cmm_data.c
index f6c193cb84e..33799e1449a 100644
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -337,7 +337,7 @@ int MlmeHardTransmitMgmtRing(struct rt_rtmp_adapter *pAd,
 
         /* */
         /* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
-        /* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
+        /* Data-Null packets also pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
 /*      if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL)) */
         {
                 if ((pHeader_802_11->FC.SubType == SUBTYPE_ACTION) ||
@@ -1933,7 +1933,7 @@ BOOLEAN RTMPCheckEtherType(struct rt_rtmp_adapter *pAd, void *pPacket)
 
         if (TypeLen <= 1500) {  /* 802.3, 802.3 LLC */
                 /*
-                   DestMAC(6) + SrcMAC(6) + Lenght(2) +
+                   DestMAC(6) + SrcMAC(6) + Length(2) +
                    DSAP(1) + SSAP(1) + Control(1) +
                    if the DSAP = 0xAA, SSAP=0xAA, Contorl = 0x03, it has a 5-bytes SNAP header.
                    => + SNAP (5, OriginationID(3) + etherType(2))
diff --git a/drivers/staging/rt2860/common/cmm_data_pci.c b/drivers/staging/rt2860/common/cmm_data_pci.c
index 7af59ff9e22..bef0bbd8cef 100644
--- a/drivers/staging/rt2860/common/cmm_data_pci.c
+++ b/drivers/staging/rt2860/common/cmm_data_pci.c
@@ -438,13 +438,13 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd,
         /* Add Rx size to channel load counter, we should ignore error counts */
         pAd->StaCfg.CLBusyBytes += (pRxD->SDL0 + 14);
 
-        /* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
+        /* Drop ToDs promiscuous frame, it is opened due to CCX 2 channel load statistics */
         if (pHeader != NULL) {
                 if (pHeader->FC.ToDs) {
                         return (NDIS_STATUS_FAILURE);
                 }
         }
-        /* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+        /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */
         /* I am kind of doubting the U2M bit operation */
         /* if (pRxD->U2M == 0) */
         /*      return(NDIS_STATUS_FAILURE); */
@@ -939,7 +939,7 @@ int MlmeHardTransmitTxRing(struct rt_rtmp_adapter *pAd,
         /* */
         /* */
         /* In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame */
-        /* Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
+        /* Data-Null packets also pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD */
         if (pHeader_802_11->FC.Type != BTYPE_DATA) {
                 if ((pHeader_802_11->FC.SubType == SUBTYPE_PROBE_REQ)
                     || !(pAd->CommonCfg.bAPSDCapable
diff --git a/drivers/staging/rt2860/common/cmm_data_usb.c b/drivers/staging/rt2860/common/cmm_data_usb.c
index 7c56c2f5198..5637857ae9e 100644
--- a/drivers/staging/rt2860/common/cmm_data_usb.c
+++ b/drivers/staging/rt2860/common/cmm_data_usb.c
@@ -702,7 +702,7 @@ Arguments:
         *pRxPending                     pending received packet flag
 
 Return Value:
-    the recieved packet
+    the received packet
 
 Note:
 ========================================================================
@@ -850,7 +850,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd,
         /* Add Rx size to channel load counter, we should ignore error counts */
         pAd->StaCfg.CLBusyBytes += (pRxWI->MPDUtotalByteCount + 14);
 
-        /* Drop ToDs promiscous frame, it is opened due to CCX 2 channel load statistics */
+        /* Drop ToDs promiscuous frame, it is opened due to CCX 2 channel load statistics */
         if (pHeader->FC.ToDs) {
                 DBGPRINT_RAW(RT_DEBUG_ERROR, ("Err;FC.ToDs\n"));
                 return NDIS_STATUS_FAILURE;
@@ -860,7 +860,7 @@ int RTMPCheckRxError(struct rt_rtmp_adapter *pAd,
                 DBGPRINT_RAW(RT_DEBUG_ERROR, ("received packet too long\n"));
                 return NDIS_STATUS_FAILURE;
         }
-        /* Drop not U2M frames, cant's drop here because we will drop beacon in this case */
+        /* Drop not U2M frames, can't's drop here because we will drop beacon in this case */
         /* I am kind of doubting the U2M bit operation */
         /* if (pRxD->U2M == 0) */
         /*      return(NDIS_STATUS_FAILURE); */
diff --git a/drivers/staging/rt2860/common/cmm_mac_pci.c b/drivers/staging/rt2860/common/cmm_mac_pci.c
index 21eed2507e1..d06f0a6dc37 100644
--- a/drivers/staging/rt2860/common/cmm_mac_pci.c
+++ b/drivers/staging/rt2860/common/cmm_mac_pci.c
@@ -1446,7 +1446,7 @@ BOOLEAN RT28xxPciAsicRadioOff(struct rt_rtmp_adapter *pAd,
            pAd->CheckDmaBusyCount = 0;
            }
          */
-/*KH Debug:My original codes have the follwoing codes, but currecnt codes do not have it. */
+/*KH Debug:My original codes have the following codes, but currecnt codes do not have it. */
 /* Disable for stability. If PCIE Link Control is modified for advance power save, re-covery this code segment. */
         RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x1280);
 /*OPSTATUS_SET_FLAG(pAd, fOP_STATUS_CLKSELECT_40MHZ); */
diff --git a/drivers/staging/rt2860/common/cmm_sanity.c b/drivers/staging/rt2860/common/cmm_sanity.c
index 6b003c90344..3bfb4ad00c1 100644
--- a/drivers/staging/rt2860/common/cmm_sanity.c
+++ b/drivers/staging/rt2860/common/cmm_sanity.c
@@ -67,7 +67,7 @@ BOOLEAN MlmeAddBAReqSanity(struct rt_rtmp_adapter *pAd,
 
         if ((MsgLen != sizeof(struct rt_mlme_addba_req))) {
                 DBGPRINT(RT_DEBUG_TRACE,
-                         ("MlmeAddBAReqSanity fail - message lenght not correct.\n"));
+                         ("MlmeAddBAReqSanity fail - message length not correct.\n"));
                 return FALSE;
         }
 
@@ -104,7 +104,7 @@ BOOLEAN MlmeDelBAReqSanity(struct rt_rtmp_adapter *pAd, void * Msg, unsigned lon
 
         if ((MsgLen != sizeof(struct rt_mlme_delba_req))) {
                 DBGPRINT(RT_DEBUG_ERROR,
-                         ("MlmeDelBAReqSanity fail - message lenght not correct.\n"));
+                         ("MlmeDelBAReqSanity fail - message length not correct.\n"));
                 return FALSE;
         }
 
diff --git a/drivers/staging/rt2860/common/cmm_sync.c b/drivers/staging/rt2860/common/cmm_sync.c
index f84194da47b..aefe1b77465 100644
--- a/drivers/staging/rt2860/common/cmm_sync.c
+++ b/drivers/staging/rt2860/common/cmm_sync.c
@@ -694,7 +694,7 @@ void ScanNextChannel(struct rt_rtmp_adapter *pAd)
                         MiniportMMRequest(pAd, 0, pOutBuffer, FrameLen);
                         MlmeFreeMemory(pAd, pOutBuffer);
                 }
-                /* For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse */
+                /* For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe response */
 
                 pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
         }
diff --git a/drivers/staging/rt2860/common/cmm_wpa.c b/drivers/staging/rt2860/common/cmm_wpa.c
index 0040f45b629..616ebec50c6 100644
--- a/drivers/staging/rt2860/common/cmm_wpa.c
+++ b/drivers/staging/rt2860/common/cmm_wpa.c
@@ -1222,7 +1222,7 @@ void PeerGroupMsg2Action(struct rt_rtmp_adapter *pAd,
 
         Note:
                 All these constants are defined in wpa.h
-                For supplicant, there is only EAPOL Key message avaliable
+                For supplicant, there is only EAPOL Key message available
 
         ========================================================================
 */
@@ -1267,7 +1267,7 @@ BOOLEAN WpaMsgTypeSubst(u8 EAPType, int * MsgType)
                 int             prefix_len      -       the length of the label
                 u8      *data           -       a specific data with variable length
                 int             data_len        -       the length of a specific data
-                int             len                     -       the output lenght
+                int             len                     -       the output length
 
         Return Value:
                 u8      *output         -       the calculated result
diff --git a/drivers/staging/rt2860/common/mlme.c b/drivers/staging/rt2860/common/mlme.c
index d9c3fd5c216..e48eac0f3a2 100644
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -632,7 +632,7 @@ void MlmeHalt(struct rt_rtmp_adapter *pAd)
                         pChipOps->AsicHaltAction(pAd);
         }
 
-        RTMPusecDelay(5000);    /*  5 msec to gurantee Ant Diversity timer canceled */
+        RTMPusecDelay(5000);    /*  5 msec to guarantee Ant Diversity timer canceled */
 
         MlmeQueueDestroy(&pAd->Mlme.Queue);
         NdisFreeSpinLock(&pAd->Mlme.TaskLock);
@@ -1107,14 +1107,14 @@ void MlmeSelectTxRateTable(struct rt_rtmp_adapter *pAd,
                                         *pInitTxRateIdx =
                                             RateSwitchTable11N1S[1];
                                         DBGPRINT_RAW(RT_DEBUG_ERROR,
-                                                     ("DRS: unkown mode,default use 11N 1S AP \n"));
+                                                     ("DRS: unknown mode,default use 11N 1S AP \n"));
                                 } else {
                                         *ppTable = RateSwitchTable11N2S;
                                         *pTableSize = RateSwitchTable11N2S[0];
                                         *pInitTxRateIdx =
                                             RateSwitchTable11N2S[1];
                                         DBGPRINT_RAW(RT_DEBUG_ERROR,
-                                                     ("DRS: unkown mode,default use 11N 2S AP \n"));
+                                                     ("DRS: unknown mode,default use 11N 2S AP \n"));
                                 }
                         } else {
                                 if (pAd->CommonCfg.TxStream == 1) {
@@ -1123,7 +1123,7 @@ void MlmeSelectTxRateTable(struct rt_rtmp_adapter *pAd,
                                         *pInitTxRateIdx =
                                             RateSwitchTable11N1S[1];
                                         DBGPRINT_RAW(RT_DEBUG_ERROR,
-                                                     ("DRS: unkown mode,default use 11N 1S AP \n"));
+                                                     ("DRS: unknown mode,default use 11N 1S AP \n"));
                                 } else {
                                         *ppTable = RateSwitchTable11N2SForABand;
                                         *pTableSize =
@@ -1131,11 +1131,11 @@ void MlmeSelectTxRateTable(struct rt_rtmp_adapter *pAd,
                                         *pInitTxRateIdx =
                                             RateSwitchTable11N2SForABand[1];
                                         DBGPRINT_RAW(RT_DEBUG_ERROR,
-                                                     ("DRS: unkown mode,default use 11N 2S AP \n"));
+                                                     ("DRS: unknown mode,default use 11N 2S AP \n"));
                                 }
                         }
                         DBGPRINT_RAW(RT_DEBUG_ERROR,
-                                     ("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
+                                     ("DRS: unknown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
                                       pAd->StaActive.SupRateLen,
                                       pAd->StaActive.ExtRateLen,
                                       pAd->StaActive.SupportedPhyInfo.MCSSet[0],
@@ -1368,7 +1368,7 @@ void STAMlmePeriodicExec(struct rt_rtmp_adapter *pAd)
                                         if ((pAd->StaCfg.LastScanTime +
                                              10 * OS_HZ) < pAd->Mlme.Now32) {
                                                 DBGPRINT(RT_DEBUG_TRACE,
-                                                         ("MMCHK - Roaming, No eligable entry, try new scan!\n"));
+                                                         ("MMCHK - Roaming, No eligible entry, try new scan!\n"));
                                                 pAd->StaCfg.ScanCnt = 2;
                                                 pAd->StaCfg.LastScanTime =
                                                     pAd->Mlme.Now32;
@@ -2828,7 +2828,7 @@ void UpdateBasicRateBitmap(struct rt_rtmp_adapter *pAdapter)
 
 /* IRQL = PASSIVE_LEVEL */
 /* IRQL = DISPATCH_LEVEL */
-/* bLinkUp is to identify the inital link speed. */
+/* bLinkUp is to identify the initial link speed. */
 /* TRUE indicates the rate update at linkup, we should not try to set the rate at 54Mbps. */
 void MlmeUpdateTxRates(struct rt_rtmp_adapter *pAd, IN BOOLEAN bLinkUp, u8 apidx)
 {
diff --git a/drivers/staging/rt2860/common/rtmp_init.c b/drivers/staging/rt2860/common/rtmp_init.c
index d359a14f5d4..5fa193eac0d 100644
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -2037,7 +2037,7 @@ void NICUpdateFifoStaCounters(struct rt_rtmp_adapter *pAd)
 
                         pEntry->FIFOCount = 0;
                         pEntry->OneSecTxNoRetryOkCount++;
-                        /* update NoDataIdleCount when sucessful send packet to STA. */
+                        /* update NoDataIdleCount when successful send packet to STA. */
                         pEntry->NoDataIdleCount = 0;
                         pEntry->ContinueTxFailCnt = 0;
                 }
@@ -2516,7 +2516,7 @@ void UserCfgInit(struct rt_rtmp_adapter *pAd)
         /*pAd->TurnAggrBulkInCount = 0; */
         pAd->bUsbTxBulkAggre = 0;
 
-        /* init as unsed value to ensure driver will set to MCU once. */
+        /* init as unused value to ensure driver will set to MCU once. */
         pAd->LedIndicatorStrength = 0xFF;
 
         pAd->CommonCfg.MaxPktOneTxBulk = 2;
@@ -3076,11 +3076,11 @@ void RTMPSetLED(struct rt_rtmp_adapter *pAd, u8 Status)
         ========================================================================
 
         Routine Description:
-                Set LED Signal Stregth
+                Set LED Signal Strength
 
         Arguments:
                 pAd                                             Pointer to our adapter
-                Dbm                                             Signal Stregth
+                Dbm                                             Signal Strength
 
         Return Value:
                 None
@@ -3090,7 +3090,7 @@ void RTMPSetLED(struct rt_rtmp_adapter *pAd, u8 Status)
         Note:
                 Can be run on any IRQL level.
 
-                According to Microsoft Zero Config Wireless Signal Stregth definition as belows.
+                According to Microsoft Zero Config Wireless Signal Strength definition as belows.
                 <= -90  No Signal
                 <= -81  Very Low
                 <= -71  Low
@@ -3118,7 +3118,7 @@ void RTMPSetSignalLED(struct rt_rtmp_adapter *pAd, IN NDIS_802_11_RSSI Dbm)
                         nLed = 31;
 
                 /* */
-                /* Update Signal Stregth to firmware if changed. */
+                /* Update Signal Strength to firmware if changed. */
                 /* */
                 if (pAd->LedIndicatorStrength != nLed) {
                         AsicSendCommandToMcu(pAd, 0x51, 0xff, nLed,
@@ -3166,7 +3166,7 @@ void RTMPEnableRxTx(struct rt_rtmp_adapter *pAd)
                 if (pAd->CommonCfg.PSPXlink)
                         rx_filter_flag = PSPXLINK;
                 else
-                        rx_filter_flag = STANORMAL;     /* Staion not drop control frame will fail WiFi Certification. */
+                        rx_filter_flag = STANORMAL;     /* Station not drop control frame will fail WiFi Certification. */
                 RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag);
         }
 
diff --git a/drivers/staging/rt2860/common/spectrum.c b/drivers/staging/rt2860/common/spectrum.c
index c0d2f428069..ceb622df12d 100644
--- a/drivers/staging/rt2860/common/spectrum.c
+++ b/drivers/staging/rt2860/common/spectrum.c
@@ -1058,8 +1058,8 @@ static void InsertMeasureReqIE(struct rt_rtmp_adapter *pAd,
                 3. Measure Token.
                 4. Measure Request Mode.
                 5. Measure Request Type.
-                6. Length of Report Infomation
-                7. Pointer of Report Infomation Buffer.
+                6. Length of Report Information
+                7. Pointer of Report Information Buffer.
 
         Return  : None.
         ==========================================================================
@@ -1400,7 +1400,7 @@ static void StartDFSProcedure(struct rt_rtmp_adapter *pAd,
         Parametrs:
                 1. MLME message containing the received frame
                 2. message length.
-                3. Channel switch announcement infomation buffer.
+                3. Channel switch announcement information buffer.
 
         Return  : None.
         ==========================================================================
@@ -1465,7 +1465,7 @@ static BOOLEAN PeerChSwAnnSanity(struct rt_rtmp_adapter *pAd,
         Parametrs:
                 1. MLME message containing the received frame
                 2. message length.
-                3. Measurement request infomation buffer.
+                3. Measurement request information buffer.
 
         Return  : None.
         ==========================================================================
@@ -1538,8 +1538,8 @@ static BOOLEAN PeerMeasureReqSanity(struct rt_rtmp_adapter *pAd,
         Parametrs:
                 1. MLME message containing the received frame
                 2. message length.
-                3. Measurement report infomation buffer.
-                4. basic report infomation buffer.
+                3. Measurement report information buffer.
+                4. basic report information buffer.
 
         Return  : None.
         ==========================================================================
diff --git a/drivers/staging/rt2860/mlme.h b/drivers/staging/rt2860/mlme.h
index cd1ee3d7a91..a285851692e 100644
--- a/drivers/staging/rt2860/mlme.h
+++ b/drivers/staging/rt2860/mlme.h
@@ -374,7 +374,7 @@ struct PACKED rt_sec_cha_offset_ie {
 struct rt_ht_phy_info {
         BOOLEAN bHtEnable;      /* If we should use ht rate. */
         BOOLEAN bPreNHt;        /* If we should use ht rate. */
-        /*Substract from HT Capability IE */
+        /*Subtract from HT Capability IE */
         u8 MCSSet[16];
 };
 
@@ -392,7 +392,7 @@ struct rt_ht_capability {
         u16 AmsduSize:1;        /* Max receiving A-MSDU size */
         u16 rsv:5;
 
-        /*Substract from Addiont HT INFO IE */
+        /*Subtract from Addiont HT INFO IE */
         u8 MaxRAmpduFactor:2;
         u8 MpduDensity:3;
         u8 ExtChanOffset:2;     /* Please note the difference with following     u8   NewExtChannelOffset; from 802.11n */
@@ -410,7 +410,7 @@ struct rt_ht_capability {
         u8 BSSCoexist2040;
 };
 
-/*   field in Addtional HT Information IE . */
+/*   field in Additional HT Information IE . */
 struct PACKED rt_add_htinfo {
         u8 ExtChanOffset:2;
         u8 RecomWidth:1;
@@ -857,7 +857,7 @@ struct rt_state_machine {
 };
 
 /* MLME AUX data structure that holds temporarliy settings during a connection attempt. */
-/* Once this attemp succeeds, all settings will be copy to pAd->StaActive. */
+/* Once this attempt succeeds, all settings will be copy to pAd->StaActive. */
 /* A connection attempt (user set OID, roaming, CCX fast roaming,..) consists of */
 /* several steps (JOIN, AUTH, ASSOC or REASSOC) and may fail at any step. We purposely */
 /* separate this under-trial settings away from pAd->StaActive so that once */
diff --git a/drivers/staging/rt2860/rt_linux.c b/drivers/staging/rt2860/rt_linux.c
index e5b04271243..1583347fcd5 100644
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -283,7 +283,7 @@ BOOLEAN OS_Need_Clone_Packet(void)
         Arguments:
                 pAd     Pointer to our adapter
                 pInsAMSDUHdr    EWC A-MSDU format has extra 14-bytes header. if TRUE, insert this 14-byte hdr in front of MSDU.
-                *pSrcTotalLen                   return total packet length. This lenght is calculated with 802.3 format packet.
+                *pSrcTotalLen                   return total packet length. This length is calculated with 802.3 format packet.
 
         Return Value:
                 NDIS_STATUS_SUCCESS
diff --git a/drivers/staging/rt2860/rt_pci_rbus.c b/drivers/staging/rt2860/rt_pci_rbus.c
index e5fb67cd9a6..f80ab4e6a0a 100644
--- a/drivers/staging/rt2860/rt_pci_rbus.c
+++ b/drivers/staging/rt2860/rt_pci_rbus.c
@@ -619,7 +619,7 @@ IRQ_HANDLE_TYPE rt2860_interrupt(int irq, void *dev_instance)
            Or kernel will panic after ifconfig ra0 down sometimes */
 
         /* */
-        /* Inital the Interrupt source. */
+        /* Initial the Interrupt source. */
         /* */
         IntSource.word = 0x00000000L;
 /*      McuIntSource.word = 0x00000000L; */
diff --git a/drivers/staging/rt2860/rtmp.h b/drivers/staging/rt2860/rtmp.h
index d16b06a6e2a..3c31340c946 100644
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -756,7 +756,7 @@ struct rt_tkip_key_info {
 /* */
 struct rt_private {
         u32 SystemResetCnt;     /* System reset counter */
-        u32 TxRingFullCnt;      /* Tx ring full occurrance number */
+        u32 TxRingFullCnt;      /* Tx ring full occurrence number */
         u32 PhyRxErrCnt;        /* PHY Rx error count, for debug purpose, might move to global counter */
         /* Variables for WEP encryption / decryption in rtmp_wep.c */
         u32 FCSCRC32;
@@ -925,7 +925,7 @@ struct rt_mlme {
   **************************************************************************/
 struct reordering_mpdu {
         struct reordering_mpdu *next;
-        void *pPacket;  /* coverted to 802.3 frame */
+        void *pPacket;  /* converted to 802.3 frame */
         int Sequence;           /* sequence number of MPDU */
         BOOLEAN bAMSDU;
 };
diff --git a/drivers/staging/rt2860/sta_ioctl.c b/drivers/staging/rt2860/sta_ioctl.c
index 5717e12a954..49b1013e7a0 100644
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -2460,7 +2460,7 @@ int rt28xx_sta_ioctl(IN struct net_device *net_dev,
                 }
         }
 
-        {                       /* determine this ioctl command is comming from which interface. */
+        {                       /* determine this ioctl command is coming from which interface. */
                 pObj->ioctl_if_type = INT_MAIN;
                 pObj->ioctl_if = MAIN_MBSSID;
         }
diff --git a/drivers/staging/rt2870/common/rtusb_bulk.c b/drivers/staging/rt2870/common/rtusb_bulk.c
index d2746f8732e..679b802d216 100644
--- a/drivers/staging/rt2870/common/rtusb_bulk.c
+++ b/drivers/staging/rt2870/common/rtusb_bulk.c
@@ -298,7 +298,7 @@ void RTUSBBulkOutDataPacket(struct rt_rtmp_adapter *pAd,
                                 /*|| ( (ThisBulkSize != 0)  && (pTxWI->AMPDU == 0)) */
                                 ) {
                                 /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
-                                /* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
+                                /* For performance in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
                                 pHTTXContext->ENextBulkOutPosition =
                                     TmpBulkEndPos;
                                 break;
@@ -311,7 +311,7 @@ void RTUSBBulkOutDataPacket(struct rt_rtmp_adapter *pAd,
                                     TmpBulkEndPos;
                                 break;
                         } else if (((pAd->BulkOutMaxPacketSize < 512) && ((ThisBulkSize & 0xfffff800) != 0)) /*|| ( (ThisBulkSize != 0)  && (pTxWI->AMPDU == 0)) */) {  /* For USB 1.1 or peer which didn't support AMPDU, limit the BulkOut size. */
-                                /* For performence in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
+                                /* For performance in b/g mode, now just check for USB 1.1 and didn't care about the APMDU or not! 2008/06/04. */
                                 pHTTXContext->ENextBulkOutPosition =
                                     TmpBulkEndPos;
                                 break;
@@ -1016,7 +1016,7 @@ void RTUSBKickBulkOut(struct rt_rtmp_adapter *pAd)
                                 RTUSBBulkOutNullFrame(pAd);
                         }
                 }
-                /* 8. No data avaliable */
+                /* 8. No data available */
                 else
                         ;
         }
diff --git a/drivers/staging/rt2870/common/rtusb_data.c b/drivers/staging/rt2870/common/rtusb_data.c
index 69368862217..5b72bcdaa78 100644
--- a/drivers/staging/rt2870/common/rtusb_data.c
+++ b/drivers/staging/rt2870/common/rtusb_data.c
@@ -71,7 +71,7 @@ void REPORT_AMSDU_FRAMES_TO_LLC(struct rt_rtmp_adapter *pAd,
 
         Routine Description:
                 This subroutine will scan through releative ring descriptor to find
-                out avaliable free ring descriptor and compare with request size.
+                out available free ring descriptor and compare with request size.
 
         Arguments:
                 pAd     Pointer to our adapter
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211.h b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
index dc608c70deb..16aa6a8952f 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211.h
@@ -1099,7 +1099,7 @@ struct ieee80211_device {
          * not set. As some cards may have different HW queues that
          * one might want to use for data and management frames
          * the option to have two callbacks might be useful.
-         * This fucntion can't sleep.
+         * This function can't sleep.
          */
         int (*softmac_hard_start_xmit)(struct sk_buff *skb,
                                struct net_device *dev);
@@ -1138,9 +1138,9 @@ struct ieee80211_device {
          * it is called in a work_queue when swithcing to ad-hoc mode
          * or in behalf of iwlist scan when the card is associated
          * and root user ask for a scan.
-         * the fucntion stop_scan should stop both the syncro and
+         * the function stop_scan should stop both the syncro and
          * background scanning and can sleep.
-         * The fucntion start_scan should initiate the background
+         * The function start_scan should initiate the background
          * scanning and can't sleep.
          */
         void (*scan_syncro)(struct net_device *dev);
diff --git a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
index 771e0196842..736a1404f28 100644
--- a/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8187se/ieee80211/ieee80211_softmac.c
@@ -1954,7 +1954,7 @@ associate_complete:
 
 
 
-/* following are for a simplier TX queue management.
+/* following are for a simpler TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
  * will uses these two function (plus a reset one), that
  * will internally uses the kernel netif_* and takes
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 70ab0084e5f..2155a771c33 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -1591,7 +1591,7 @@ void rtl8180_rx(struct net_device *dev)
                 priv->RSSI = RSSI;
                 /* SQ translation formula is provided by SD3 DZ. 2006.06.27 */
                 if (quality >= 127)
-                        quality = 1; /*0; */ /* 0 will cause epc to show signal zero , walk aroud now; */
+                        quality = 1; /*0; */ /* 0 will cause epc to show signal zero , walk around now; */
                 else if (quality < 27)
                         quality = 100;
                 else
@@ -3883,7 +3883,7 @@ void rtl8180_tx_isr(struct net_device *dev, int pri, short error)
          * If the packet previous of the nic pointer has been
          * processed this doesn't matter: it will be checked
          * here at the next round. Anyway if no more packet are
-         * TXed no memory leak occour at all.
+         * TXed no memory leak occur at all.
          */
 
         switch (pri) {
diff --git a/drivers/staging/rtl8187se/r8180_dm.c b/drivers/staging/rtl8187se/r8180_dm.c
index fc4907839c5..261085d4b74 100644
--- a/drivers/staging/rtl8187se/r8180_dm.c
+++ b/drivers/staging/rtl8187se/r8180_dm.c
@@ -123,7 +123,7 @@ DoTxHighPower(
 //
 //      Description:
 //              Callback function of UpdateTxPowerWorkItem.
-//              Because of some event happend, e.g. CCX TPC, High Power Mechanism,
+//              Because of some event happened, e.g. CCX TPC, High Power Mechanism,
 //              We update Tx power of current channel again.
 //
 void rtl8180_tx_pw_wq (struct work_struct *work)
@@ -984,7 +984,7 @@ StaRateAdaptive87SE(
                 {
                         priv->TryupingCount = 0;
                         //
-                        // When transfering from CCK to OFDM, DIG is an important issue.
+                        // When transferring from CCK to OFDM, DIG is an important issue.
                         //
                         if(priv->CurrentOperaRate == 22)
                                 bUpdateInitialGain = true;
diff --git a/drivers/staging/rtl8187se/r8180_rtl8225z2.c b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
index 2a2afd51cf4..3f09f76080a 100644
--- a/drivers/staging/rtl8187se/r8180_rtl8225z2.c
+++ b/drivers/staging/rtl8187se/r8180_rtl8225z2.c
@@ -378,7 +378,7 @@ static u32 read_rtl8225(struct net_device *dev, u8 adr)
         mask = (low2high) ? 0x01 : (((u32)0x01) << (12-1));
 
         /*
-         * We must set data pin to HW controled, otherwise RF can't driver it
+         * We must set data pin to HW controlled, otherwise RF can't driver it
          * and value RF register won't be able to read back properly.
          */
         write_nic_word(dev, RFPinsEnable, (oval2 & (~0x01)));
diff --git a/drivers/staging/rtl8187se/r8185b_init.c b/drivers/staging/rtl8187se/r8185b_init.c
index 3bdf9b31cc4..4b0b830f9ab 100644
--- a/drivers/staging/rtl8187se/r8185b_init.c
+++ b/drivers/staging/rtl8187se/r8185b_init.c
@@ -1273,7 +1273,7 @@ MgntDisconnectIBSS(
         /*
                 Stop Beacon.
 
-                Vista add a Adhoc profile, HW radio off untill OID_DOT11_RESET_REQUEST
+                Vista add a Adhoc profile, HW radio off until OID_DOT11_RESET_REQUEST
                 Driver would set MSR=NO_LINK, then HW Radio ON, MgntQueue Stuck.
                 Because Bcn DMA isn't complete, mgnt queue would stuck until Bcn packet send.
 
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211.h b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
index 3ca38815261..dbe21ab0dbf 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211.h
@@ -1967,7 +1967,7 @@ struct ieee80211_device {
         u16 prev_seq_ctl;       /* used to drop duplicate frames */
 
         /* map of allowed channels. 0 is dummy */
-        // FIXME: remeber to default to a basic channel plan depending of the PHY type
+        // FIXME: remember to default to a basic channel plan depending of the PHY type
 #ifdef ENABLE_DOT11D
         void* pDot11dInfo;
         bool bGlobalDomain;
@@ -2121,7 +2121,7 @@ struct ieee80211_device {
          * not set. As some cards may have different HW queues that
          * one might want to use for data and management frames
          * the option to have two callbacks might be useful.
-         * This fucntion can't sleep.
+         * This function can't sleep.
          */
         int (*softmac_hard_start_xmit)(struct sk_buff *skb,
                                struct ieee80211_device *ieee80211);
@@ -2160,9 +2160,9 @@ struct ieee80211_device {
          * it is called in a work_queue when swithcing to ad-hoc mode
          * or in behalf of iwlist scan when the card is associated
          * and root user ask for a scan.
-         * the fucntion stop_scan should stop both the syncro and
+         * the function stop_scan should stop both the syncro and
          * background scanning and can sleep.
-         * The fucntion start_scan should initiate the background
+         * The function start_scan should initiate the background
          * scanning and can't sleep.
          */
         void (*scan_syncro)(struct ieee80211_device *ieee80211);
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
index add015ebba1..ed5a3802309 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_rx.c
@@ -1426,7 +1426,7 @@ int ieee80211_rtl_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
 
 /*
-* Make ther structure we read from the beacon packet has
+* Make the structure we read from the beacon packet to have
 * the right values
 */
 static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
index f6922d40a88..7d4cba3a7c1 100644
--- a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac.c
@@ -2023,7 +2023,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
                                                         return 1;
                                                 }
                                                 else
-                                                {       //filling the PeerHTCap. //maybe not neccesary as we can get its info from current_network.
+                                                {       //filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
                                                         memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
                                                         memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
                                                 }
@@ -2163,7 +2163,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
         return 0;
 }
 
-/* following are for a simplier TX queue management.
+/* following are for a simpler TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
  * will uses these two function (plus a reset one), that
  * will internally uses the kernel netif_* and takes
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h
index f968817d073..56a120cf629 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_HT.h
@@ -64,7 +64,7 @@ typedef enum _HT_CHANNEL_WIDTH{
 }HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
 
 //
-// Represent Extention Channel Offset in HT Capabilities
+// Represent Extension Channel Offset in HT Capabilities
 // This is available only in 40Mhz mode.
 //
 typedef enum _HT_EXTCHNL_OFFSET{
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
index a2a4fe9dd9d..f7a9da3ec82 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_HTProc.c
@@ -459,7 +459,7 @@ u8 HTIOTActIsForcedCTS2Self(struct ieee80211_device *ieee, struct ieee80211_netw
 /**
 * Function:     HTIOTActIsDisableMCS15
 *
-* Overview:     Check whether driver should declare capability of receving MCS15
+* Overview:     Check whether driver should declare capability of receiving MCS15
 *
 * Input:
 *                       PADAPTER                Adapter,
@@ -496,7 +496,7 @@ bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
 /**
 * Function:     HTIOTActIsDisableMCSTwoSpatialStream
 *
-* Overview:     Check whether driver should declare capability of receving All 2 ss packets
+* Overview:     Check whether driver should declare capability of receiving All 2 ss packets
 *
 * Input:
 *                       PADAPTER                Adapter,
@@ -1681,7 +1681,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
         //if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
         if (Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee)))
          {
-                        // Handle Illegal extention channel offset!!
+                        // Handle Illegal extension channel offset!!
                 if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
                         Offset = HT_EXTCHNL_OFFSET_NO_EXT;
                 if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
@@ -1698,7 +1698,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
 
         pHTInfo->bSwBwInProgress = true;
 
-        // TODO: 2007.7.13 by Emily Wait 2000ms  in order to garantee that switching
+        // TODO: 2007.7.13 by Emily Wait 2000ms  in order to guarantee that switching
         //   bandwidth is executed after scan is finished. It is a temporal solution
         //   because software should ganrantee the last operation of switching bandwidth
         //   is executed properlly.
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h b/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h
index baaac2149de..e7e26fd9639 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_TS.h
@@ -44,7 +44,7 @@ typedef struct _RX_TS_RECORD {
         u16                             RxTimeoutIndicateSeq;
         struct list_head                RxPendingPktList;
         struct timer_list               RxPktPendingTimer;
-        BA_RECORD                       RxAdmittedBARecord;      // For BA Recepient
+        BA_RECORD                       RxAdmittedBARecord;      // For BA Recipient
         u16                             RxLastSeqNum;
         u8                              RxLastFragNum;
         u8                              num;
diff --git a/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c
index 29eecf0ab76..ad6872dcf1c 100644
--- a/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192e/ieee80211/rtl819x_TSProc.c
@@ -135,7 +135,7 @@ void ResetRxTsEntry(PRX_TS_RECORD pTS)
         ResetTsCommonInfo(&pTS->TsCommonInfo);
         pTS->RxIndicateSeq = 0xffff; // This indicate the RxIndicateSeq is not used now!!
         pTS->RxTimeoutIndicateSeq = 0xffff; // This indicate the RxTimeoutIndicateSeq is not used now!!
-        ResetBaEntry(&pTS->RxAdmittedBARecord);   // For BA Recepient
+        ResetBaEntry(&pTS->RxAdmittedBARecord);   // For BA Recipient
 }
 
 void TSInitialize(struct ieee80211_device *ieee)
diff --git a/drivers/staging/rtl8192e/r819xE_phy.c b/drivers/staging/rtl8192e/r819xE_phy.c
index dfa4e112ef4..9e7828ef1cb 100644
--- a/drivers/staging/rtl8192e/r819xE_phy.c
+++ b/drivers/staging/rtl8192e/r819xE_phy.c
@@ -2032,13 +2032,13 @@ void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv)
         {
                 case HT_CHANNEL_WIDTH_20:
                         regBwOpMode |= BW_OPMODE_20MHZ;
-                       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+                       // 2007/02/07 Mark by Emily because we have not verify whether this register works
                         write_nic_byte(priv, BW_OPMODE, regBwOpMode);
                         break;
 
                 case HT_CHANNEL_WIDTH_20_40:
                         regBwOpMode &= ~BW_OPMODE_20MHZ;
-                        // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+                        // 2007/02/07 Mark by Emily because we have not verify whether this register works
                         write_nic_byte(priv, BW_OPMODE, regBwOpMode);
                         break;
 
@@ -2116,7 +2116,7 @@ void rtl8192_SetBWModeWorkItem(struct r8192_priv *priv)
 }
 
 /******************************************************************************
- *function:  This function schedules bandwith switch work.
+ *function:  This function schedules bandwidth switch work.
  *   input:  struct net_device *dev
  *           HT_CHANNEL_WIDTH   Bandwidth  //20M or 40M
  *           HT_EXTCHNL_OFFSET Offset      //Upper, Lower, or Don't care
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index c0b844d75c0..e716f7b1144 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -1965,7 +1965,7 @@ struct ieee80211_device {
         u16 prev_seq_ctl;       /* used to drop duplicate frames */
 
         /* map of allowed channels. 0 is dummy */
-        // FIXME: remeber to default to a basic channel plan depending of the PHY type
+        // FIXME: remember to default to a basic channel plan depending of the PHY type
         void* pDot11dInfo;
         bool bGlobalDomain;
         int rate;       /* current rate */
@@ -2119,7 +2119,7 @@ struct ieee80211_device {
          * not set. As some cards may have different HW queues that
          * one might want to use for data and management frames
          * the option to have two callbacks might be useful.
-         * This fucntion can't sleep.
+         * This function can't sleep.
          */
         int (*softmac_hard_start_xmit)(struct sk_buff *skb,
                                struct net_device *dev);
@@ -2158,9 +2158,9 @@ struct ieee80211_device {
          * it is called in a work_queue when swithcing to ad-hoc mode
          * or in behalf of iwlist scan when the card is associated
          * and root user ask for a scan.
-         * the fucntion stop_scan should stop both the syncro and
+         * the function stop_scan should stop both the syncro and
          * background scanning and can sleep.
-         * The fucntion start_scan should initiate the background
+         * The function start_scan should initiate the background
          * scanning and can't sleep.
          */
         void (*scan_syncro)(struct net_device *dev);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 498b520efcf..a414303aef5 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -1399,7 +1399,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
 static u8 qos_oui[QOS_OUI_LEN] = { 0x00, 0x50, 0xF2 };
 
 /*
-* Make ther structure we read from the beacon packet has
+* Make the structure we read from the beacon packet to have
 * the right values
 */
 static int ieee80211_verify_qos_info(struct ieee80211_qos_information_element
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
index 4992d630f98..4ec0a6520dd 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac.c
@@ -1973,7 +1973,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
                                                         return 1;
                                                 }
                                                 else
-                                                {       //filling the PeerHTCap. //maybe not neccesary as we can get its info from current_network.
+                                                {       //filling the PeerHTCap. //maybe not necessary as we can get its info from current_network.
                                                         memcpy(ieee->pHTInfo->PeerHTCapBuf, network->bssht.bdHTCapBuf, network->bssht.bdHTCapLen);
                                                         memcpy(ieee->pHTInfo->PeerHTInfoBuf, network->bssht.bdHTInfoBuf, network->bssht.bdHTInfoLen);
                                                 }
@@ -2113,7 +2113,7 @@ ieee80211_rx_frame_softmac(struct ieee80211_device *ieee, struct sk_buff *skb,
         return 0;
 }
 
-/* following are for a simplier TX queue management.
+/* following are for a simpler TX queue management.
  * Instead of using netif_[stop/wake]_queue the driver
  * will uses these two function (plus a reset one), that
  * will internally uses the kernel netif_* and takes
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index cde603f67f4..0b1a1fc0939 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -64,7 +64,7 @@ typedef enum _HT_CHANNEL_WIDTH{
 }HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
 
 //
-// Represent Extention Channel Offset in HT Capabilities
+// Represent Extension Channel Offset in HT Capabilities
 // This is available only in 40Mhz mode.
 //
 typedef enum _HT_EXTCHNL_OFFSET{
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 50f4f5943e7..e88a839b2a9 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -423,7 +423,7 @@ u8 HTIOTActIsDisableMCS14(struct ieee80211_device* ieee, u8* PeerMacAddr)
 /**
 * Function:     HTIOTActIsDisableMCS15
 *
-* Overview:     Check whether driver should declare capability of receving MCS15
+* Overview:     Check whether driver should declare capability of receiving MCS15
 *
 * Input:
 *                       PADAPTER                Adapter,
@@ -460,7 +460,7 @@ bool HTIOTActIsDisableMCS15(struct ieee80211_device* ieee)
 /**
 * Function:     HTIOTActIsDisableMCSTwoSpatialStream
 *
-* Overview:     Check whether driver should declare capability of receving All 2 ss packets
+* Overview:     Check whether driver should declare capability of receiving All 2 ss packets
 *
 * Input:
 *                       PADAPTER                Adapter,
@@ -1409,7 +1409,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
         //if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
         if(Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
          {
-                        // Handle Illegal extention channel offset!!
+                        // Handle Illegal extension channel offset!!
                 if(ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
                         Offset = HT_EXTCHNL_OFFSET_NO_EXT;
                 if(Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
@@ -1426,7 +1426,7 @@ void HTSetConnectBwMode(struct ieee80211_device* ieee, HT_CHANNEL_WIDTH	Bandwidt
 
         pHTInfo->bSwBwInProgress = true;
 
-        // TODO: 2007.7.13 by Emily Wait 2000ms  in order to garantee that switching
+        // TODO: 2007.7.13 by Emily Wait 2000ms  in order to guarantee that switching
         //   bandwidth is executed after scan is finished. It is a temporal solution
         //   because software should ganrantee the last operation of switching bandwidth
         //   is executed properlly.
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h
index baaac2149de..e7e26fd9639 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TS.h
@@ -44,7 +44,7 @@ typedef struct _RX_TS_RECORD {
         u16                             RxTimeoutIndicateSeq;
         struct list_head                RxPendingPktList;
         struct timer_list               RxPktPendingTimer;
-        BA_RECORD                       RxAdmittedBARecord;      // For BA Recepient
+        BA_RECORD                       RxAdmittedBARecord;      // For BA Recipient
         u16                             RxLastSeqNum;
         u8                              RxLastFragNum;
         u8                              num;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index c3fcaae0750..957ce4ef48b 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -135,7 +135,7 @@ void ResetRxTsEntry(PRX_TS_RECORD pTS)
         ResetTsCommonInfo(&pTS->TsCommonInfo);
         pTS->RxIndicateSeq = 0xffff; // This indicate the RxIndicateSeq is not used now!!
         pTS->RxTimeoutIndicateSeq = 0xffff; // This indicate the RxTimeoutIndicateSeq is not used now!!
-        ResetBaEntry(&pTS->RxAdmittedBARecord);   // For BA Recepient
+        ResetBaEntry(&pTS->RxAdmittedBARecord);   // For BA Recipient
 }
 
 void TSInitialize(struct ieee80211_device *ieee)
diff --git a/drivers/staging/rtl8192u/ieee80211/scatterwalk.c b/drivers/staging/rtl8192u/ieee80211/scatterwalk.c
index 49f401fbce8..3543a614504 100644
--- a/drivers/staging/rtl8192u/ieee80211/scatterwalk.c
+++ b/drivers/staging/rtl8192u/ieee80211/scatterwalk.c
@@ -71,7 +71,7 @@ static void scatterwalk_pagedone(struct scatter_walk *walk, int out,
                                  unsigned int more)
 {
         /* walk->data may be pointing the first byte of the next page;
-           however, we know we transfered at least one byte.  So,
+           however, we know we transferred at least one byte.  So,
            walk->data - 1 will be a virtual address in the mapped page. */
 
         if (out)
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index da612e6d994..e81b8ab6aa9 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -460,7 +460,7 @@ u32 read_nic_dword(struct net_device *dev, int indx)
 /* u8 read_phy_cck(struct net_device *dev, u8 adr); */
 /* u8 read_phy_ofdm(struct net_device *dev, u8 adr); */
 /* this might still called in what was the PHY rtl8185/rtl8192 common code
- * plans are to possibilty turn it again in one common code...
+ * plans are to possibility turn it again in one common code...
  */
 inline void force_pci_posting(struct net_device *dev)
 {
@@ -1378,7 +1378,7 @@ struct sk_buff *DrvAggr_Aggregation(struct net_device *dev, struct ieee80211_drv
                 //tx_agg_desc->LINIP = 0;
                 //tx_agg_desc->CmdInit = 1;
                 tx_agg_desc->Offset =  sizeof(tx_fwinfo_819x_usb) + 8;
-                /* already raw data, need not to substract header length */
+                /* already raw data, need not to subtract header length */
                 tx_agg_desc->PktSize = skb->len & 0xffff;
 
                 /*DWORD 1*/
@@ -2888,7 +2888,7 @@ static void rtl8192_get_eeprom_size(struct net_device* dev)
         RT_TRACE(COMP_EPROM, "<===========%s(), epromtype:%d\n", __FUNCTION__, priv->epromtype);
 }
 
-//used to swap endian. as ntohl & htonl are not neccessary to swap endian, so use this instead.
+//used to swap endian. as ntohl & htonl are not necessary to swap endian, so use this instead.
 static inline u16 endian_swap(u16* data)
 {
         u16 tmp = *data;
diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h
index 01f58b90202..2ac421626e7 100644
--- a/drivers/staging/rtl8192u/r819xU_HTType.h
+++ b/drivers/staging/rtl8192u/r819xU_HTType.h
@@ -65,7 +65,7 @@ typedef enum _HT_CHANNEL_WIDTH{
 }HT_CHANNEL_WIDTH, *PHT_CHANNEL_WIDTH;
 
 //
-// Represent Extention Channel Offset in HT Capabilities
+// Represent Extension Channel Offset in HT Capabilities
 // This is available only in 40Mhz mode.
 //
 typedef enum _HT_EXTCHNL_OFFSET{
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index 41684e8fcf4..c4586b0817d 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -1531,13 +1531,13 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
         {
                 case HT_CHANNEL_WIDTH_20:
                         regBwOpMode |= BW_OPMODE_20MHZ;
-                       // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+                       // 2007/02/07 Mark by Emily because we have not verify whether this register works
                         write_nic_byte(dev, BW_OPMODE, regBwOpMode);
                         break;
 
                 case HT_CHANNEL_WIDTH_20_40:
                         regBwOpMode &= ~BW_OPMODE_20MHZ;
-                        // 2007/02/07 Mark by Emily becasue we have not verify whether this register works
+                        // 2007/02/07 Mark by Emily because we have not verify whether this register works
                         write_nic_byte(dev, BW_OPMODE, regBwOpMode);
                         break;
 
@@ -1647,7 +1647,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
 }
 
 /******************************************************************************
- *function:  This function schedules bandwith switch work.
+ *function:  This function schedules bandwidth switch work.
  *   input:  struct net_device *dev
  *           HT_CHANNEL_WIDTH   Bandwidth  //20M or 40M
  *           HT_EXTCHNL_OFFSET Offset      //Upper, Lower, or Don't care
diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h
index 3a945b5f0e0..2dc78476b7d 100644
--- a/drivers/staging/rtl8712/rtl871x_cmd.h
+++ b/drivers/staging/rtl8712/rtl871x_cmd.h
@@ -656,7 +656,7 @@ struct PT_param {
 /*
  * Result:
  * 0x00: success
- * 0x01: sucess, and check Response.
+ * 0x01: success, and check Response.
  * 0x02: cmd ignored due to duplicated sequcne number
  * 0x03: cmd dropped due to invalid cmd code
  * 0x04: reserved.
diff --git a/drivers/staging/rtl8712/rtl871x_led.h b/drivers/staging/rtl8712/rtl871x_led.h
index 994ef82141a..8085e5eb82b 100644
--- a/drivers/staging/rtl8712/rtl871x_led.h
+++ b/drivers/staging/rtl8712/rtl871x_led.h
@@ -78,14 +78,14 @@ struct LED_871x {
 };
 
 struct led_priv {
-        /* add for led controll */
+        /* add for led control */
         struct LED_871x         SwLed0;
         struct LED_871x         SwLed1;
         enum LED_STRATEGY_871x  LedStrategy;
         u8                      bRegUseLed;
         void (*LedControlHandler)(struct _adapter *padapter,
                                   enum LED_CTL_MODE LedAction);
-        /* add for led controll */
+        /* add for led control */
 };
 
 /*===========================================================================
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.c b/drivers/staging/rtl8712/rtl871x_mlme.c
index 98ba7602e25..866554d48d8 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.c
+++ b/drivers/staging/rtl8712/rtl871x_mlme.c
@@ -1663,7 +1663,7 @@ void r8712_update_registrypriv_dev_network(struct _adapter *adapter)
                               (struct ndis_wlan_bssid_ex *)pdev_network);
 }
 
-/*the fucntion is at passive_level*/
+/*the function is at passive_level*/
 void r8712_joinbss_reset(struct _adapter *padapter)
 {
         int i;
@@ -1726,7 +1726,7 @@ unsigned int r8712_restructure_ht_ie(struct _adapter *padapter, u8 *in_ie,
         return phtpriv->ht_option;
 }
 
-/* the fucntion is > passive_level (in critical_section) */
+/* the function is > passive_level (in critical_section) */
 static void update_ht_cap(struct _adapter *padapter, u8 *pie, uint ie_len)
 {
         u8 *p, max_ampdu_sz;
@@ -1803,7 +1803,7 @@ void r8712_issue_addbareq_cmd(struct _adapter *padapter, int priority)
         }
 }
 
-/*the fucntion is >= passive_level*/
+/*the function is >= passive_level*/
 unsigned int r8712_add_ht_addt_info(struct _adapter *padapter,
                               u8 *in_ie, u8 *out_ie,
                               uint in_len, uint *pout_len)
diff --git a/drivers/staging/rtl8712/rtl871x_mlme.h b/drivers/staging/rtl8712/rtl871x_mlme.h
index 2b35b740ab8..2794804d082 100644
--- a/drivers/staging/rtl8712/rtl871x_mlme.h
+++ b/drivers/staging/rtl8712/rtl871x_mlme.h
@@ -29,7 +29,7 @@
                                                  *  single-tone*/
 #define WIFI_MP_CTX_BACKGROUND_PENDING  0x00080000 /* pending in cont, tx
                                         * background due to out of skb*/
-#define WIFI_MP_CTX_CCK_HW      0x00100000      /* in continous tx*/
+#define WIFI_MP_CTX_CCK_HW      0x00100000      /* in continuous tx*/
 #define WIFI_MP_CTX_CCK_CS      0x00200000      /* in cont, tx with carrier
                                                  * suppression*/
 #define   WIFI_MP_LPBK_STATE    0x00400000
diff --git a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
index e386fb0aac3..23532a79385 100644
--- a/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
+++ b/drivers/staging/rtl8712/rtl871x_mp_phy_regdef.h
@@ -38,7 +38,7 @@
  * 2. 0x800/0x900/0xA00/0xC00/0xD00/0xE00
  * 3. RF register 0x00-2E
  * 4. Bit Mask for BB/RF register
- * 5. Other defintion for BB/RF R/W
+ * 5. Other definition for BB/RF R/W
  *
  * 1. PMAC duplicate register due to connection: RF_Mode, TRxRN, NumOf L-STF
  * 1. Page1(0x100)
diff --git a/drivers/staging/rtl8712/usb_halinit.c b/drivers/staging/rtl8712/usb_halinit.c
index 0e9483bbabe..46287c17a41 100644
--- a/drivers/staging/rtl8712/usb_halinit.c
+++ b/drivers/staging/rtl8712/usb_halinit.c
@@ -112,7 +112,7 @@ u8 r8712_usb_hal_bus_init(struct _adapter *padapter)
                 /* Initialization for power on sequence, */
                 r8712_write8(padapter, SPS0_CTRL + 1, 0x53);
                 r8712_write8(padapter, SPS0_CTRL, 0x57);
-                /* Enable AFE Macro Block's Bandgap adn Enable AFE Macro
+                /* Enable AFE Macro Block's Bandgap and Enable AFE Macro
                  * Block's Mbias
                  */
                 val8 = r8712_read8(padapter, AFE_MISC);
diff --git a/drivers/staging/rts_pstor/rtsx_chip.h b/drivers/staging/rts_pstor/rtsx_chip.h
index 713c5eaadac..9f7cd82a154 100644
--- a/drivers/staging/rts_pstor/rtsx_chip.h
+++ b/drivers/staging/rts_pstor/rtsx_chip.h
@@ -180,8 +180,8 @@
 #define CUR_ERR                 0x70    /* current error                    */
 #define DEF_ERR                 0x71    /* specific command error           */
 
-/*---- sense key Infomation ----*/
-#define SNSKEYINFO_LEN          3       /* length of sense key infomation   */
+/*---- sense key Information ----*/
+#define SNSKEYINFO_LEN          3       /* length of sense key information   */
 
 #define SKSV                    0x80
 #define CDB_ILLEGAL             0x40
@@ -235,13 +235,13 @@ struct sense_data_t {
     unsigned char   seg_no;             /* segment No.                      */
     unsigned char   sense_key;          /* byte5 : ILI                      */
                                                 /* bit3-0 : sense key              */
-    unsigned char   info[4];            /* infomation                       */
+    unsigned char   info[4];            /* information                       */
     unsigned char   ad_sense_len;       /* additional sense data length     */
-    unsigned char   cmd_info[4];        /* command specific infomation      */
+    unsigned char   cmd_info[4];        /* command specific information      */
     unsigned char   asc;                /* ASC                              */
     unsigned char   ascq;               /* ASCQ                             */
     unsigned char   rfu;                /* FRU                              */
-    unsigned char   sns_key_info[3];    /* sense key specific infomation    */
+    unsigned char   sns_key_info[3];    /* sense key specific information    */
 };
 
 /* PCI Operation Register Address */
diff --git a/drivers/staging/rts_pstor/rtsx_scsi.h b/drivers/staging/rts_pstor/rtsx_scsi.h
index fac122c1eab..64b84992fdb 100644
--- a/drivers/staging/rts_pstor/rtsx_scsi.h
+++ b/drivers/staging/rts_pstor/rtsx_scsi.h
@@ -85,7 +85,7 @@
 #define CHIP_NORMALMODE         0x00
 #define CHIP_DEBUGMODE          0x01
 
-/* SD Pass Through Command Extention */
+/* SD Pass Through Command Extension */
 #define SD_PASS_THRU_MODE       0xD0
 #define SD_EXECUTE_NO_DATA      0xD1
 #define SD_EXECUTE_READ         0xD2
diff --git a/drivers/staging/rts_pstor/sd.c b/drivers/staging/rts_pstor/sd.c
index 21bfa5755be..8d066bd428c 100644
--- a/drivers/staging/rts_pstor/sd.c
+++ b/drivers/staging/rts_pstor/sd.c
@@ -1719,7 +1719,7 @@ static u8 sd_search_final_phase(struct rtsx_chip *chip, u32 phase_map, u8 tune_d
         }
 
 Search_Finish:
-        RTSX_DEBUGP("Final choosen phase: %d\n", final_phase);
+        RTSX_DEBUGP("Final chosen phase: %d\n", final_phase);
         return final_phase;
 }
 
diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c
index 71a5fbc041e..c2f2664b61a 100644
--- a/drivers/staging/sep/sep_driver.c
+++ b/drivers/staging/sep/sep_driver.c
@@ -586,7 +586,7 @@ static unsigned int sep_poll(struct file *filp, poll_table *wait)
         dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n",
                 sep->send_ct, sep->reply_ct);
 
-        /* Check if error occured during poll */
+        /* Check if error occurred during poll */
         retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR);
         if (retval2 != 0x0) {
                 dev_warn(&sep->pdev->dev, "poll; poll error %x\n", retval2);
@@ -1106,7 +1106,7 @@ static int sep_lock_user_pages(struct sep_device *sep,
                         lli_array[count].block_size);
         }
 
-        /* Set output params acording to the in_out flag */
+        /* Set output params according to the in_out flag */
         if (in_out_flag == SEP_DRIVER_IN_FLAG) {
                 *lli_array_ptr = lli_array;
                 sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = num_pages;
@@ -1577,7 +1577,7 @@ static int sep_prepare_input_dma_table(struct sep_device *sep,
 
                 /*
                  * If this is not the last table -
-                 * then allign it to the block size
+                 * then align it to the block size
                  */
                 if (!last_table_flag)
                         table_data_size =
@@ -1974,7 +1974,7 @@ static int sep_prepare_input_output_dma_table(struct sep_device *sep,
         dev_dbg(&sep->pdev->dev, "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n",
                 SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP);
 
-        /* Call the fucntion that creates table from the lli arrays */
+        /* Call the function that creates table from the lli arrays */
         error = sep_construct_dma_tables_from_lli(sep, lli_in_array,
                 sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages,
                 lli_out_array,
@@ -2416,7 +2416,7 @@ end_function:
  *      @cmd: command
  *      @arg: pointer to argument structure
  *
- *      Implement the ioctl methods availble on the SEP device.
+ *      Implement the ioctl methods available on the SEP device.
  */
 static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 {
diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h
index d3b9220f396..1033425c9c3 100644
--- a/drivers/staging/sep/sep_driver_config.h
+++ b/drivers/staging/sep/sep_driver_config.h
@@ -65,11 +65,11 @@
 #define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE              16
 
 /* flag that signifies tah the lock is
-currently held by the proccess (struct file) */
+currently held by the process (struct file) */
 #define SEP_DRIVER_OWN_LOCK_FLAG                        1
 
 /* flag that signifies tah the lock is currently NOT
-held by the proccess (struct file) */
+held by the process (struct file) */
 #define SEP_DRIVER_DISOWN_LOCK_FLAG                     0
 
 /* indicates whether driver has mapped/unmapped shared area */
diff --git a/drivers/staging/slicoss/README b/drivers/staging/slicoss/README
index 70f49099c06..b83bba19b7f 100644
--- a/drivers/staging/slicoss/README
+++ b/drivers/staging/slicoss/README
@@ -33,7 +33,7 @@ TODO:
         - NAPI?
         - wasted overhead of extra stats
         - state variables for things that are
-          easily availble and shouldn't be kept in card structure, cardnum, ...
+          easily available and shouldn't be kept in card structure, cardnum, ...
           slotnumber, events, ...
         - get rid of slic_spinlock wrapper
         - volatile == bad design => bad code
diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c
index d007e4a12c1..78a16a76850 100644
--- a/drivers/staging/sm7xx/smtcfb.c
+++ b/drivers/staging/sm7xx/smtcfb.c
@@ -965,7 +965,7 @@ static int __devinit smtcfb_pci_probe(struct pci_dev *pdev,
                 goto failed;
 
         smtcfb_setmode(sfb);
-        /* Primary display starting from 0 postion */
+        /* Primary display starting from 0 position */
         hw.BaseAddressInVRAM = 0;
         sfb->fb.par = &hw;
 
@@ -1055,7 +1055,7 @@ static int __maybe_unused smtcfb_suspend(struct pci_dev *pdev, pm_message_t msg)
 
         pdev->dev.power.power_state = msg;
 
-        /* additionaly turn off all function blocks including internal PLLs */
+        /* additionally turn off all function blocks including internal PLLs */
         smtc_seqw(0x21, 0xff);
 
         return 0;
diff --git a/drivers/staging/speakup/keyhelp.c b/drivers/staging/speakup/keyhelp.c
index 23cf7f44f45..170f38815ff 100644
--- a/drivers/staging/speakup/keyhelp.c
+++ b/drivers/staging/speakup/keyhelp.c
@@ -69,7 +69,7 @@ static void build_key_data(void)
         memset(key_offsets, 0, sizeof(key_offsets));
         kp = state_tbl + nstates + 1;
         while (*kp++) {
-                /* count occurrances of each function */
+                /* count occurrences of each function */
                 for (i = 0; i < nstates; i++, kp++) {
                         if (!*kp)
                                 continue;
diff --git a/drivers/staging/speakup/spkguide.txt b/drivers/staging/speakup/spkguide.txt
index 24362eb7b8f..f3210571e39 100644
--- a/drivers/staging/speakup/spkguide.txt
+++ b/drivers/staging/speakup/spkguide.txt
@@ -1091,7 +1091,7 @@ screen that is constantly changing, such as a clock or status line.
 
 There is no way to save these window settings, and you can only have one
 window defined for each virtual console.  There is also no way to have
-windows automaticly defined for specific applications.
+windows automatically defined for specific applications.
 
 In order to define a window, use the review keys to move your reading
 cursor to the beginning of the area you want to define.  Then press
diff --git a/drivers/staging/spectra/ffsport.c b/drivers/staging/spectra/ffsport.c
index 007b24b54e2..20dae73d3b7 100644
--- a/drivers/staging/spectra/ffsport.c
+++ b/drivers/staging/spectra/ffsport.c
@@ -38,7 +38,7 @@
 * Outputs:      Number of Used Bits
 *               0, if the argument is 0
 * Description:  Calculate the number of bits used by a given power of 2 number
-*               Number can be upto 32 bit
+*               Number can be up to 32 bit
 *&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
 int GLOB_Calc_Used_Bits(u32 n)
 {
@@ -653,7 +653,7 @@ static int SBD_setup_device(struct spectra_nand_dev *dev, int which)
         }
         dev->queue->queuedata = dev;
 
-        /* As Linux block layer doens't support >4KB hardware sector,  */
+        /* As Linux block layer does't support >4KB hardware sector,  */
         /* Here we force report 512 byte hardware sector size to Kernel */
         blk_queue_logical_block_size(dev->queue, 512);
 
diff --git a/drivers/staging/spectra/flash.c b/drivers/staging/spectra/flash.c
index a2f820025ae..aead358e5c2 100644
--- a/drivers/staging/spectra/flash.c
+++ b/drivers/staging/spectra/flash.c
@@ -965,7 +965,7 @@ static void process_cmd_fail_abort(int *first_failed_cmd,
         if (0 == *first_failed_cmd)
                 *first_failed_cmd = PendingCMD[idx].SBDCmdIndex;
 
-        nand_dbg_print(NAND_DBG_DEBUG, "Uncorrectable error has occured "
+        nand_dbg_print(NAND_DBG_DEBUG, "Uncorrectable error has occurred "
                 "while executing %u Command %u accesing Block %u\n",
                 (unsigned int)p_BTableChangesDelta->ftl_cmd_cnt,
                 PendingCMD[idx].CMD,
@@ -1879,7 +1879,7 @@ static int write_back_to_l2_cache(u8 *buf, u64 logical_addr)
 }
 
 /*
- * Seach in the Level2 Cache table to find the cache item.
+ * Search in the Level2 Cache table to find the cache item.
  * If find, read the data from the NAND page of L2 Cache,
  * Otherwise, return FAIL.
  */
@@ -3989,7 +3989,7 @@ int GLOB_FTL_Block_Erase(u64 blk_addr)
 * Inputs:       index to block that was just incremented and is at the max
 * Outputs:      PASS=0 / FAIL=1
 * Description:  If any erase counts at MAX, adjusts erase count of every
-*               block by substracting least worn
+*               block by subtracting least worn
 *               counter from counter value of every entry in wear table
 *&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&*/
 static int FTL_Adjust_Relative_Erase_Count(u32 Index_of_MAX)
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index d55a8e40318..3e68d58fdff 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -71,7 +71,7 @@
 #define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM  (0x01)
 
 /**
- * struct synaptics_rmi4_fn_desc - contains the funtion descriptor information
+ * struct synaptics_rmi4_fn_desc - contains the function descriptor information
  * @query_base_addr: base address for query
  * @cmd_base_addr: base address for command
  * @ctrl_base_addr: base address for control
@@ -92,7 +92,7 @@ struct synaptics_rmi4_fn_desc {
 };
 
 /**
- * struct synaptics_rmi4_fn - contains the funtion information
+ * struct synaptics_rmi4_fn - contains the function information
  * @fn_number: function number
  * @num_of_data_sources: number of data sources
  * @num_of_data_points: number of fingers touched
@@ -151,7 +151,7 @@ struct synaptics_rmi4_device_info {
  * @input_dev: pointer for input device
  * @i2c_client: pointer for i2c client
  * @board: constant pointer for touch platform data
- * @fn_list_mutex: mutex for funtion list
+ * @fn_list_mutex: mutex for function list
  * @rmi4_page_mutex: mutex for rmi4 page
  * @current_page: variable for integer
  * @number_of_interrupt_register: interrupt registers count
@@ -278,7 +278,7 @@ static int synaptics_rmi4_i2c_byte_write(struct synaptics_rmi4_data *pdata,
         txbuf[0]        = address & MASK_8BIT;
         txbuf[1]        = data;
         retval          = i2c_master_send(pdata->i2c_client, txbuf, 2);
-        /* Add in retry on writes only in certian error return values */
+        /* Add in retry on writes only in certain error return values */
         if (retval != 2) {
                 dev_err(&i2c->dev, "%s:failed:%d\n", __func__, retval);
                 retval = -EIO;
@@ -561,7 +561,7 @@ static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
         }
         /*
          * 2D data sources have only 3 bits for the number of fingers
-         * supported - so the encoding is a bit wierd.
+         * supported - so the encoding is a bit weird.
          */
         if ((queries[1] & MASK_3BIT) <= 4)
                 /* add 1 since zero based */
@@ -1027,7 +1027,7 @@ err_input:
  * synaptics_rmi4_remove() - Removes the i2c-client touchscreen driver
  * @client: i2c client structure pointer
  *
- * This funtion uses to remove the i2c-client
+ * This function uses to remove the i2c-client
  * touchscreen driver and returns integer.
  */
 static int __devexit synaptics_rmi4_remove(struct i2c_client *client)
@@ -1053,7 +1053,7 @@ static int __devexit synaptics_rmi4_remove(struct i2c_client *client)
  * synaptics_rmi4_suspend() - suspend the touch screen controller
  * @dev: pointer to device structure
  *
- * This funtion is used to suspend the
+ * This function is used to suspend the
  * touch panel controller and returns integer
  */
 static int synaptics_rmi4_suspend(struct device *dev)
@@ -1089,7 +1089,7 @@ static int synaptics_rmi4_suspend(struct device *dev)
  * synaptics_rmi4_resume() - resume the touch screen controller
  * @dev: pointer to device structure
  *
- * This funtion is used to resume the touch panel
+ * This function is used to resume the touch panel
  * controller and returns integer.
  */
 static int synaptics_rmi4_resume(struct device *dev)
@@ -1148,7 +1148,7 @@ static struct i2c_driver synaptics_rmi4_driver = {
 /**
  * synaptics_rmi4_init() - Initialize the touchscreen driver
  *
- * This funtion uses to initializes the synaptics
+ * This function uses to initializes the synaptics
  * touchscreen driver and returns integer.
  */
 static int __init synaptics_rmi4_init(void)
@@ -1158,7 +1158,7 @@ static int __init synaptics_rmi4_init(void)
 /**
  * synaptics_rmi4_exit() - De-initialize the touchscreen driver
  *
- * This funtion uses to de-initialize the synaptics
+ * This function uses to de-initialize the synaptics
  * touchscreen driver and returns none.
  */
 static void __exit synaptics_rmi4_exit(void)
diff --git a/drivers/staging/tidspbridge/core/_tiomap.h b/drivers/staging/tidspbridge/core/_tiomap.h
index 1e0273e50d2..7cb58710397 100644
--- a/drivers/staging/tidspbridge/core/_tiomap.h
+++ b/drivers/staging/tidspbridge/core/_tiomap.h
@@ -366,7 +366,7 @@ extern s32 dsp_debug;
  *  ======== sm_interrupt_dsp ========
  *  Purpose:
  *      Set interrupt value & send an interrupt to the DSP processor(s).
- *      This is typicaly used when mailbox interrupt mechanisms allow data
+ *      This is typically used when mailbox interrupt mechanisms allow data
  *      to be associated with interrupt such as for OMAP's CMD/DATA regs.
  *  Parameters:
  *      dev_context:    Handle to Bridge driver defined device info.
diff --git a/drivers/staging/tidspbridge/core/chnl_sm.c b/drivers/staging/tidspbridge/core/chnl_sm.c
index 8381130e146..6d66e7d0fba 100644
--- a/drivers/staging/tidspbridge/core/chnl_sm.c
+++ b/drivers/staging/tidspbridge/core/chnl_sm.c
@@ -578,7 +578,7 @@ int bridge_chnl_get_ioc(struct chnl_object *chnl_obj, u32 timeout,
                 } else if (stat_sync == -EPERM) {
                         /* This can occur when the user mode thread is
                          * aborted (^C), or when _VWIN32_WaitSingleObject()
-                         * fails due to unkown causes. */
+                         * fails due to unknown causes. */
                         /* Even though Wait failed, there may be something in
                          * the Q: */
                         if (list_empty(&pchnl->io_completions)) {
diff --git a/drivers/staging/tidspbridge/dynload/cload.c b/drivers/staging/tidspbridge/dynload/cload.c
index 390040984e0..5cecd237e3f 100644
--- a/drivers/staging/tidspbridge/dynload/cload.c
+++ b/drivers/staging/tidspbridge/dynload/cload.c
@@ -718,7 +718,7 @@ static void dload_symbols(struct dload_state *dlthis)
          * as a temporary for .dllview record construction.
          * Allocate storage for the whole table.  Add 1 to the section count
          * in case a trampoline section is auto-generated as well as the
-         * size of the trampoline section name so DLLView doens't get lost.
+         * size of the trampoline section name so DLLView does't get lost.
          */
 
         siz = sym_count * sizeof(struct local_symbol);
diff --git a/drivers/staging/tidspbridge/hw/hw_mmu.c b/drivers/staging/tidspbridge/hw/hw_mmu.c
index 014f5d5293a..c214df9b205 100644
--- a/drivers/staging/tidspbridge/hw/hw_mmu.c
+++ b/drivers/staging/tidspbridge/hw/hw_mmu.c
@@ -59,7 +59,7 @@ enum hw_mmu_page_size_t {
  * RETURNS:
  *
  *       Type           : hw_status
- *       Description     : 0             -- No errors occured
+ *       Description     : 0             -- No errors occurred
  *                       RET_BAD_NULL_PARAM     -- A Pointer
  *                                              Paramater was set to NULL
  *
@@ -102,7 +102,7 @@ static hw_status mmu_flush_entry(const void __iomem *base_address);
  * RETURNS:
  *
  *       Type           : hw_status
- *       Description     : 0             -- No errors occured
+ *       Description     : 0             -- No errors occurred
  *                       RET_BAD_NULL_PARAM     -- A Pointer Paramater
  *                                                 was set to NULL
  *                       RET_PARAM_OUT_OF_RANGE -- Input Parameter out
@@ -147,7 +147,7 @@ static hw_status mmu_set_cam_entry(const void __iomem *base_address,
  * RETURNS:
  *
  *       Type           : hw_status
- *       Description     : 0             -- No errors occured
+ *       Description     : 0             -- No errors occurred
  *                       RET_BAD_NULL_PARAM     -- A Pointer Paramater
  *                                                      was set to NULL
  *                       RET_PARAM_OUT_OF_RANGE -- Input Parameter
diff --git a/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h b/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
index d60e2525802..6e7ab4fd8c3 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/_chnl_sm.h
@@ -144,7 +144,7 @@ struct chnl_object {
         s8 chnl_mode;           /* Chnl mode and attributes */
         /* Chnl I/O completion event (user mode) */
         void *user_event;
-        /* Abstract syncronization object */
+        /* Abstract synchronization object */
         struct sync_object *sync_event;
         u32 process;            /* Process which created this channel */
         u32 cb_arg;             /* Argument to use with callback */
@@ -156,7 +156,7 @@ struct chnl_object {
         struct list_head io_completions;
         struct list_head free_packets_list;     /* List of free Irps */
         struct ntfy_object *ntfy_obj;
-        u32 bytes_moved;        /* Total number of bytes transfered */
+        u32 bytes_moved;        /* Total number of bytes transferred */
 
         /* For DSP-DMA */
 
diff --git a/drivers/staging/tidspbridge/include/dspbridge/clk.h b/drivers/staging/tidspbridge/include/dspbridge/clk.h
index b2395032342..685341c5069 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/clk.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/clk.h
@@ -55,7 +55,7 @@ extern void dsp_clk_exit(void);
  *      Initializes private state of CLK module.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      CLK initialized.
@@ -71,7 +71,7 @@ void dsp_gpt_wait_overflow(short int clk_id, unsigned int load);
  *  Parameters:
  *  Returns:
  *      0:      Success.
- *      -EPERM: Error occured while enabling the clock.
+ *      -EPERM: Error occurred while enabling the clock.
  *  Requires:
  *  Ensures:
  */
@@ -86,7 +86,7 @@ u32 dsp_clock_enable_all(u32 dsp_per_clocks);
  *  Parameters:
  *  Returns:
  *      0:        Success.
- *      -EPERM:      Error occured while disabling the clock.
+ *      -EPERM:      Error occurred while disabling the clock.
  *  Requires:
  *  Ensures:
  */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cmm.h b/drivers/staging/tidspbridge/include/dspbridge/cmm.h
index 27a21b5f3ff..aff22051cf5 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/cmm.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/cmm.h
@@ -190,7 +190,7 @@ extern int cmm_get_info(struct cmm_object *hcmm_mgr,
  *      Initializes private state of CMM module.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      CMM initialized.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/cod.h b/drivers/staging/tidspbridge/include/dspbridge/cod.h
index 53bd4bb8b0b..cb684c11b30 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/cod.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/cod.h
@@ -249,7 +249,7 @@ extern int cod_get_sym_value(struct cod_manager *cod_mgr_obj,
  *  Parameters:
  *      None.
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      A requirement for each of the other public COD functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dev.h b/drivers/staging/tidspbridge/include/dspbridge/dev.h
index f41e4783157..f92b4be0b41 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dev.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dev.h
@@ -497,7 +497,7 @@ extern void dev_exit(void);
  *      Initialize DEV's private state, keeping a reference count on each call.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      TRUE: A requirement for the other public DEV functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/drv.h b/drivers/staging/tidspbridge/include/dspbridge/drv.h
index 25ef1a2c58e..9cdbd955dce 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/drv.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/drv.h
@@ -154,7 +154,7 @@ struct process_context {
  *  Parameters:
  *      drv_obj:        Location to store created DRV Object handle.
  *  Returns:
- *      0:        Sucess
+ *      0:        Success
  *      -ENOMEM:    Failed in Memory allocation
  *      -EPERM:      General Failure
  *  Requires:
@@ -170,7 +170,7 @@ struct process_context {
  *      There is one Driver Object for the Driver representing
  *      the driver itself. It contains the list of device
  *      Objects and the list of Device Extensions in the system.
- *      Also it can hold other neccessary
+ *      Also it can hold other necessary
  *      information in its storage area.
  */
 extern int drv_create(struct drv_object **drv_obj);
@@ -180,7 +180,7 @@ extern int drv_create(struct drv_object **drv_obj);
  *  Purpose:
  *      destroys the Dev Object list, DrvExt list
  *      and destroy the DRV object
- *      Called upon driver unLoading.or unsuccesful loading of the driver.
+ *      Called upon driver unLoading.or unsuccessful loading of the driver.
  *  Parameters:
  *      driver_obj:     Handle to Driver object .
  *  Returns:
diff --git a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
index c2ba26c0930..ed32bf38313 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/dspdefs.h
@@ -52,7 +52,7 @@ struct bridge_dev_context;
  *      dev_ctxt:    Handle to Bridge driver defined device context.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL
@@ -91,7 +91,7 @@ typedef int(*fxn_brd_setstate) (struct bridge_dev_context
  *      dsp_addr:       DSP address at which to start execution.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL
@@ -142,7 +142,7 @@ typedef int(*fxn_brd_memcopy) (struct bridge_dev_context
  *      mem_type:       Memory space on DSP to which to transfer.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL;
@@ -205,7 +205,7 @@ typedef int(*fxn_brd_memunmap) (struct bridge_dev_context
  *      dev_ctxt:    Handle to Bridge driver defined device context.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL
@@ -248,7 +248,7 @@ typedef int(*fxn_brd_status) (struct bridge_dev_context *dev_ctxt,
  *      mem_type:       Memory space on DSP from which to transfer.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL;
@@ -274,7 +274,7 @@ typedef int(*fxn_brd_read) (struct bridge_dev_context *dev_ctxt,
  *      mem_type:       Memory space on DSP to which to transfer.
  *  Returns:
  *      0:        Success.
- *      -ETIMEDOUT:  Timeout occured waiting for a response from hardware.
+ *      -ETIMEDOUT:  Timeout occurred waiting for a response from hardware.
  *      -EPERM:      Other, unspecified error.
  *  Requires:
  *      dev_ctxt != NULL;
@@ -601,7 +601,7 @@ typedef int(*fxn_chnl_getmgrinfo) (struct chnl_mgr
  *  Returns:
  *      0:            Success;
  *      -EFAULT:        Invalid chnl_obj.
- *      -ETIMEDOUT: Timeout occured before channel could be idled.
+ *      -ETIMEDOUT: Timeout occurred before channel could be idled.
  *  Requires:
  *  Ensures:
  */
diff --git a/drivers/staging/tidspbridge/include/dspbridge/mgr.h b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
index e506c4d4947..47b0318430e 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/mgr.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/mgr.h
@@ -176,7 +176,7 @@ extern void mgr_exit(void);
  *      mgr_handle:     Handle to the Manager Object
  *      dcd_handle:     Ptr to receive the DCD Handle.
  *  Returns:
- *      0:        Sucess
+ *      0:        Success
  *      -EPERM:      Failure to get the Handle
  *  Requires:
  *      MGR is initialized.
@@ -195,7 +195,7 @@ extern int mgr_get_dcd_handle(struct mgr_object
  *      call. Initializes the DCD.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      TRUE: A requirement for the other public MGR functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/node.h b/drivers/staging/tidspbridge/include/dspbridge/node.h
index 53da0ef483c..16371d818e3 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/node.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/node.h
@@ -44,7 +44,7 @@
  *      -ESPIPE:        iAlg functions not found for a DAIS node.
  *      -EDOM:         attr_in != NULL and attr_in->prio out of
  *                          range.
- *      -EPERM:          A failure occured, unable to allocate node.
+ *      -EPERM:          A failure occurred, unable to allocate node.
  *      -EBADR:    Proccessor is not in the running state.
  *  Requires:
  *      node_init(void) called.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/proc.h b/drivers/staging/tidspbridge/include/dspbridge/proc.h
index 5e09fd165d9..f00dffd5198 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/proc.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/proc.h
@@ -89,7 +89,7 @@ extern int proc_auto_start(struct cfg_devnode *dev_node_obj,
  *  Returns:
  *      0     :       SUCCESS
  *      -EFAULT :       Invalid processor handle.
- *      -ETIME:       A Timeout Occured before the Control information
+ *      -ETIME:       A Timeout Occurred before the Control information
  *                        could be sent.
  *      -EPERM   :       General Failure.
  *  Requires:
@@ -169,7 +169,7 @@ extern int proc_enum_nodes(void *hprocessor,
  *      0     :       Success.
  *      -EFAULT :       Invalid processor handle.
  *      -EBADR:    The processor is not in the PROC_RUNNING state.
- *      -ETIME:       A timeout occured before the DSP responded to the
+ *      -ETIME:       A timeout occurred before the DSP responded to the
  *                        querry.
  *      -EPERM   :       Unable to get Resource Information
  *  Requires:
@@ -229,7 +229,7 @@ extern int proc_get_dev_object(void *hprocessor,
  *      call.
  *  Parameters:
  *  Returns:
- *      TRUE if initialized; FALSE if error occured.
+ *      TRUE if initialized; FALSE if error occurred.
  *  Requires:
  *  Ensures:
  *      TRUE: A requirement for the other public PROC functions.
diff --git a/drivers/staging/tidspbridge/include/dspbridge/pwr.h b/drivers/staging/tidspbridge/include/dspbridge/pwr.h
index 5e3ab2123aa..0fb066488da 100644
--- a/drivers/staging/tidspbridge/include/dspbridge/pwr.h
+++ b/drivers/staging/tidspbridge/include/dspbridge/pwr.h
@@ -46,7 +46,7 @@
  *      0:            Success.
  *      0: Success, but the DSP was already asleep.
  *      -EINVAL:    The specified sleep_code is not supported.
- *      -ETIME:       A timeout occured while waiting for DSP sleep
+ *      -ETIME:       A timeout occurred while waiting for DSP sleep
  *                          confirmation.
  *      -EPERM:          General failure, unable to send sleep command to
  *                          the DSP.
@@ -67,7 +67,7 @@ extern int pwr_sleep_dsp(const u32 sleep_code, const u32 timeout);
  *  Returns:
  *      0:            Success.
  *      0:  Success, but the DSP was already awake.
- *      -ETIME:       A timeout occured while waiting for wake
+ *      -ETIME:       A timeout occurred while waiting for wake
  *                          confirmation.
  *      -EPERM:          General failure, unable to send wake command to
  *                          the DSP.
@@ -85,7 +85,7 @@ extern int pwr_wake_dsp(const u32 timeout);
  *  Returns:
  *      0:            Success.
  *      0:  Success, but the DSP was already awake.
- *      -ETIME:       A timeout occured while waiting for wake
+ *      -ETIME:       A timeout occurred while waiting for wake
  *                          confirmation.
  *      -EPERM:          General failure, unable to send wake command to
  *                          the DSP.
@@ -103,7 +103,7 @@ extern int pwr_pm_pre_scale(u16 voltage_domain, u32 level);
  *  Returns:
  *      0:            Success.
  *      0:  Success, but the DSP was already awake.
- *      -ETIME:       A timeout occured while waiting for wake
+ *      -ETIME:       A timeout occurred while waiting for wake
  *                          confirmation.
  *      -EPERM:          General failure, unable to send wake command to
  *                          the DSP.
diff --git a/drivers/staging/tidspbridge/pmgr/dev.c b/drivers/staging/tidspbridge/pmgr/dev.c
index 9a38d86a84a..522810bc742 100644
--- a/drivers/staging/tidspbridge/pmgr/dev.c
+++ b/drivers/staging/tidspbridge/pmgr/dev.c
@@ -787,7 +787,7 @@ int dev_notify_clients(struct dev_object *dev_obj, u32 ret)
 
         /*
          * FIXME: this code needs struct proc_object to have a list_head
-         * at the begining. If not, this can go horribly wrong.
+         * at the beginning. If not, this can go horribly wrong.
          */
         list_for_each(curr, &dev_obj->proc_list)
                 proc_notify_clients((void *)curr, ret);
@@ -810,7 +810,7 @@ int dev_remove_device(struct cfg_devnode *dev_node_obj)
         if (!dev_node_obj)
                 status = -EFAULT;
 
-        /* Retrieve the device object handle originaly stored with
+        /* Retrieve the device object handle originally stored with
          * the dev_node: */
         if (!status) {
                 /* check the device string and then store dev object */
@@ -986,7 +986,7 @@ int dev_insert_proc_object(struct dev_object *hdev_obj,
         /* Add DevObject to tail. */
         /*
          * FIXME: this code needs struct proc_object to have a list_head
-         * at the begining. If not, this can go horribly wrong.
+         * at the beginning. If not, this can go horribly wrong.
          */
         list_add_tail((struct list_head *)proc_obj, &dev_obj->proc_list);
 
diff --git a/drivers/staging/tidspbridge/rmgr/drv.c b/drivers/staging/tidspbridge/rmgr/drv.c
index 8c88583364e..db8215f540d 100644
--- a/drivers/staging/tidspbridge/rmgr/drv.c
+++ b/drivers/staging/tidspbridge/rmgr/drv.c
@@ -609,7 +609,7 @@ int drv_request_resources(u32 dw_context, u32 *dev_node_strg)
         DBC_REQUIRE(dev_node_strg != NULL);
 
         /*
-         *  Allocate memory to hold the string. This will live untill
+         *  Allocate memory to hold the string. This will live until
          *  it is freed in the Release resources. Update the driver object
          *  list.
          */
diff --git a/drivers/staging/tidspbridge/rmgr/nldr.c b/drivers/staging/tidspbridge/rmgr/nldr.c
index fb5c2ba01d4..0e70cba15eb 100644
--- a/drivers/staging/tidspbridge/rmgr/nldr.c
+++ b/drivers/staging/tidspbridge/rmgr/nldr.c
@@ -57,9 +57,9 @@
  *   uuuuuuuu|fueeeeee|fudddddd|fucccccc|
  *  where
  *      u = unused
- *      cccccc = prefered/required dynamic mem segid for create phase data/code
- *      dddddd = prefered/required dynamic mem segid for delete phase data/code
- *      eeeeee = prefered/req. dynamic mem segid for execute phase data/code
+ *      cccccc = preferred/required dynamic mem segid for create phase data/code
+ *      dddddd = preferred/required dynamic mem segid for delete phase data/code
+ *      eeeeee = preferred/req. dynamic mem segid for execute phase data/code
  *      f = flag indicating if memory is preferred or required:
  *        f = 1 if required, f = 0 if preferred.
  *
diff --git a/drivers/staging/tidspbridge/rmgr/proc.c b/drivers/staging/tidspbridge/rmgr/proc.c
index c4e5c4e0d71..242dd139999 100644
--- a/drivers/staging/tidspbridge/rmgr/proc.c
+++ b/drivers/staging/tidspbridge/rmgr/proc.c
@@ -1670,7 +1670,7 @@ int proc_stop(void *hprocessor)
         if (!status) {
                 dev_dbg(bridge, "%s: processor in standby mode\n", __func__);
                 p_proc_object->proc_state = PROC_STOPPED;
-                /* Destory the Node Manager, msg_ctrl Manager */
+                /* Destroy the Node Manager, msg_ctrl Manager */
                 if (!(dev_destroy2(p_proc_object->dev_obj))) {
                         /* Destroy the msg_ctrl by calling msg_delete */
                         dev_get_msg_mgr(p_proc_object->dev_obj, &hmsg_mgr);
@@ -1827,7 +1827,7 @@ static int proc_monitor(struct proc_object *proc_obj)
 
         /* This is needed only when Device is loaded when it is
          * already 'ACTIVE' */
-        /* Destory the Node Manager, msg_ctrl Manager */
+        /* Destroy the Node Manager, msg_ctrl Manager */
         if (!dev_destroy2(proc_obj->dev_obj)) {
                 /* Destroy the msg_ctrl by calling msg_delete */
                 dev_get_msg_mgr(proc_obj->dev_obj, &hmsg_mgr);
diff --git a/drivers/staging/tm6000/tm6000-video.c b/drivers/staging/tm6000/tm6000-video.c
index c80a316d9d8..17db6684abb 100644
--- a/drivers/staging/tm6000/tm6000-video.c
+++ b/drivers/staging/tm6000/tm6000-video.c
@@ -182,7 +182,7 @@ static inline void get_next_buf(struct tm6000_dmaqueue *dma_q,
         if (!buf)
                 return;
 
-        /* Cleans up buffer - Usefull for testing for frame/URB loss */
+        /* Cleans up buffer - Useful for testing for frame/URB loss */
         outp = videobuf_to_vmalloc(&(*buf)->vb);
 
         return;
diff --git a/drivers/staging/tty/cd1865.h b/drivers/staging/tty/cd1865.h
index 9940966e7a1..8c2ad654b79 100644
--- a/drivers/staging/tty/cd1865.h
+++ b/drivers/staging/tty/cd1865.h
@@ -9,7 +9,7 @@
  *      Please DO contact io8-linux@specialix.co.uk if you require
  *      support.
  *
- *      This driver was developped in the BitWizard linux device
+ *      This driver was developed in the BitWizard linux device
  *      driver service. If you require a linux device driver for your
  *      product, please contact devices@BitWizard.nl for a quote.
  *
diff --git a/drivers/staging/tty/epca.c b/drivers/staging/tty/epca.c
index 7ad3638967a..7f1369e5b41 100644
--- a/drivers/staging/tty/epca.c
+++ b/drivers/staging/tty/epca.c
@@ -7,7 +7,7 @@
         ** This driver is no longer supported by Digi **
 
         Much of this design and code came from epca.c which was
-        copyright (C) 1994, 1995 Troy De Jongh, and subsquently
+        copyright (C) 1994, 1995 Troy De Jongh, and subsequently
         modified by David Nugent, Christoph Lameter, Mike McLagan.
 
         This program is free software; you can redistribute it and/or modify
@@ -471,7 +471,7 @@ static void shutdown(struct channel *ch, struct tty_struct *tty)
         memoff(ch);
 
         /*
-         * The channel has officialy been closed. The next time it is opened it
+         * The channel has officially been closed. The next time it is opened it
          * will have to reinitialized. Set a flag to indicate this.
          */
         /* Prevent future Digi programmed interrupts from coming active */
@@ -975,7 +975,7 @@ static int __init pc_init(void)
 
         /*
          * Note : If lilo was used to configure the driver and the ignore
-         * epcaconfig option was choosen (digiepca=2) then nbdevs and num_cards
+         * epcaconfig option was chosen (digiepca=2) then nbdevs and num_cards
          * will equal 0 at this point. This is okay; PCI cards will still be
          * picked up if detected.
          */
@@ -1230,14 +1230,14 @@ static void post_fep_init(unsigned int crd)
         memaddr = bd->re_map_membase;
 
         /*
-         * The below assignment will set bc to point at the BEGINING of the
+         * The below assignment will set bc to point at the BEGINNING of the
          * cards channel structures. For 1 card there will be between 8 and 64
          * of these structures.
          */
         bc = memaddr + CHANSTRUCT;
 
         /*
-         * The below assignment will set gd to point at the BEGINING of global
+         * The below assignment will set gd to point at the BEGINNING of global
          * memory address 0xc00. The first data in that global memory actually
          * starts at address 0xc1a. The command in pointer begins at 0xd10.
          */
@@ -1492,7 +1492,7 @@ static void doevent(int crd)
                 /*
                  * The two assignments below get the current modem status
                  * (mstat) and the previous modem status (lstat). These are
-                 * useful becuase an event could signal a change in modem
+                 * useful because an event could signal a change in modem
                  * signals itself.
                  */
                 mstat = readb(eventbuf + 2);
@@ -1897,7 +1897,7 @@ static void receive_data(struct channel *ch, struct tty_struct *tty)
                 /*
                  * Even if head has wrapped around only report the amount of
                  * data to be equal to the size - tail. Remember memcpy can't
-                 * automaticly wrap around the receive buffer.
+                 * automatically wrap around the receive buffer.
                  */
                 dataToRead = (wrapgap < bytesAvailable) ? wrapgap
                                                         : bytesAvailable;
@@ -2543,7 +2543,7 @@ static void __init epca_setup(char *str, int *ints)
                                         break;
                         /*
                          * If the index incremented above refers to a
-                         * legitamate board type set it here.
+                         * legitimate board type set it here.
                          */
                         if (index < EPCA_NUM_TYPES)
                                 board.type = loop;
diff --git a/drivers/staging/tty/ip2/i2hw.h b/drivers/staging/tty/ip2/i2hw.h
index c0ba6c05f0c..8df2f487217 100644
--- a/drivers/staging/tty/ip2/i2hw.h
+++ b/drivers/staging/tty/ip2/i2hw.h
@@ -335,7 +335,7 @@ be off by a factor of five. The important point is that the first command reset
 in fact generates a reset pulse on the board. This pulse is guaranteed to last
 less than 10 milliseconds. The additional delay ensures the 1400 has had the
 chance to respond sufficiently to the first reset. Why not a longer delay? Much
-more than 50 milliseconds gets to be noticable, but the board would still work.
+more than 50 milliseconds gets to be noticeable, but the board would still work.
 
 Once all 16 bytes of the Power-on Reset Message have been read, the bootstrap
 firmware is ready to receive loadware.
@@ -399,7 +399,7 @@ typedef union _porStr		// "por" stands for Power On Reset
                 // expandable products must report a MAP of available channels. Since 
                 // each UART supports four ports, we represent each UART found by a
                 // single bit. Using two bytes to supply the mapping information we
-                // report the presense or absense of up to 16 UARTS, or 64 ports in
+                // report the presence or absence of up to 16 UARTS, or 64 ports in
                 // steps of 4 ports. For -IIEX products, the ports are numbered
                 // starting at the box closest to the controller in the "chain".
 
diff --git a/drivers/staging/tty/ip2/i2lib.c b/drivers/staging/tty/ip2/i2lib.c
index 0d10b89218e..13a3caba85f 100644
--- a/drivers/staging/tty/ip2/i2lib.c
+++ b/drivers/staging/tty/ip2/i2lib.c
@@ -821,7 +821,7 @@ i2GetStatus(i2ChanStrPtr pCh, int resetBits)
 //
 // Description:
 // Strips data from the input buffer and writes it to pDest. If there is a
-// collosal blunder, (invalid structure pointers or the like), returns -1.
+// colossal blunder, (invalid structure pointers or the like), returns -1.
 // Otherwise, returns the number of bytes read.
 //******************************************************************************
 static int
@@ -909,7 +909,7 @@ i2Input_exit:
 // Returns:    Number of bytes stripped, or -1 for error
 //
 // Description:
-// Strips any data from the input buffer. If there is a collosal blunder,
+// Strips any data from the input buffer. If there is a colossal blunder,
 // (invalid structure pointers or the like), returns -1. Otherwise, returns the
 // number of bytes stripped.
 //******************************************************************************
@@ -963,7 +963,7 @@ i2InputFlush(i2ChanStrPtr pCh)
 // Returns:    Number of bytes available, or -1 for error
 //
 // Description:
-// If there is a collosal blunder, (invalid structure pointers or the like),
+// If there is a colossal blunder, (invalid structure pointers or the like),
 // returns -1. Otherwise, returns the number of bytes stripped. Otherwise,
 // returns the number of bytes available in the buffer.
 //******************************************************************************
@@ -1001,7 +1001,7 @@ i2InputAvailable(i2ChanStrPtr pCh)
 //
 // Description:
 // Queues the data at pSource to be sent as data packets to the board. If there
-// is a collosal blunder, (invalid structure pointers or the like), returns -1.
+// is a colossal blunder, (invalid structure pointers or the like), returns -1.
 // Otherwise, returns the number of bytes written. What if there is not enough
 // room for all the data? If pCh->channelOptions & CO_NBLOCK_WRITE is set, then
 // we transfer as many characters as we can now, then return. If this bit is
diff --git a/drivers/staging/tty/ip2/ip2main.c b/drivers/staging/tty/ip2/ip2main.c
index ea7a8fb0828..ba074fbb4ce 100644
--- a/drivers/staging/tty/ip2/ip2main.c
+++ b/drivers/staging/tty/ip2/ip2main.c
@@ -1824,7 +1824,7 @@ ip2_flush_chars( PTTY tty )
 //              ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
 
                 //
-                // We may need to restart i2Output if it does not fullfill this request
+                // We may need to restart i2Output if it does not fulfill this request
                 //
                 strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff);
                 if ( strip != pCh->Pbuf_stuff ) {
diff --git a/drivers/staging/tty/specialix.c b/drivers/staging/tty/specialix.c
index 17a1be536a4..cb24c6d999d 100644
--- a/drivers/staging/tty/specialix.c
+++ b/drivers/staging/tty/specialix.c
@@ -9,7 +9,7 @@
  *      support. But please read the documentation (specialix.txt)
  *      first.
  *
- *      This driver was developped in the BitWizard linux device
+ *      This driver was developed in the BitWizard linux device
  *      driver service. If you require a linux device driver for your
  *      product, please contact devices@BitWizard.nl for a quote.
  *
@@ -978,7 +978,7 @@ static void sx_change_speed(struct specialix_board *bp,
         spin_lock_irqsave(&bp->lock, flags);
         sx_out(bp, CD186x_CAR, port_No(port));
 
-        /* The Specialix board doens't implement the RTS lines.
+        /* The Specialix board does't implement the RTS lines.
            They are used to set the IRQ level. Don't touch them. */
         if (sx_crtscts(tty))
                 port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS);
diff --git a/drivers/staging/tty/specialix_io8.h b/drivers/staging/tty/specialix_io8.h
index c63005274d9..1215d7e2cb3 100644
--- a/drivers/staging/tty/specialix_io8.h
+++ b/drivers/staging/tty/specialix_io8.h
@@ -10,7 +10,7 @@
  *      Please DO contact io8-linux@specialix.co.uk if you require
  *      support.
  *
- *      This driver was developped in the BitWizard linux device
+ *      This driver was developed in the BitWizard linux device
  *      driver service. If you require a linux device driver for your
  *      product, please contact devices@BitWizard.nl for a quote.
  *
@@ -79,7 +79,7 @@ more than a few  PCI versions of the card. */
 
 #define SPECIALIX_MAGIC         0x0907
 
-#define SX_CCR_TIMEOUT 10000   /* CCR timeout. You may need to wait upto
+#define SX_CCR_TIMEOUT 10000   /* CCR timeout. You may need to wait up to
                                   10 milliseconds before the internal
                                   processor is available again after
                                   you give it a command */
diff --git a/drivers/staging/usbip/vhci_hcd.c b/drivers/staging/usbip/vhci_hcd.c
index e2348499859..0f02a4b12ae 100644
--- a/drivers/staging/usbip/vhci_hcd.c
+++ b/drivers/staging/usbip/vhci_hcd.c
@@ -194,7 +194,7 @@ void rh_port_disconnect(int rhport)
  *
  * So, the maximum number of ports is 31 ( port 0 to port 30) ?
  *
- * The return value is the actual transfered length in byte. If nothing has
+ * The return value is the actual transferred length in byte. If nothing has
  * been changed, return 0. In the case that the number of ports is less than or
  * equal to 6 (VHCI_NPORTS==7), return 1.
  *
diff --git a/drivers/staging/vme/bridges/vme_ca91cx42.c b/drivers/staging/vme/bridges/vme_ca91cx42.c
index d4a48c4e59c..a4007287ef4 100644
--- a/drivers/staging/vme/bridges/vme_ca91cx42.c
+++ b/drivers/staging/vme/bridges/vme_ca91cx42.c
@@ -621,7 +621,7 @@ static int ca91cx42_master_set(struct vme_master_resource *image, int enabled,
 
         /*
          * Let's allocate the resource here rather than further up the stack as
-         * it avoids pushing loads of bus dependant stuff up the stack
+         * it avoids pushing loads of bus dependent stuff up the stack
          */
         retval = ca91cx42_alloc_resource(image, size);
         if (retval) {
@@ -1052,7 +1052,7 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
                 pci_attr = dest->private;
         }
 
-        /* Check we can do fullfill required attributes */
+        /* Check we can do fulfill required attributes */
         if ((vme_attr->aspace & ~(VME_A16 | VME_A24 | VME_A32 | VME_USER1 |
                 VME_USER2)) != 0) {
 
@@ -1069,7 +1069,7 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
                 goto err_cycle;
         }
 
-        /* Check to see if we can fullfill source and destination */
+        /* Check to see if we can fulfill source and destination */
         if (!(((src->type == VME_DMA_PCI) && (dest->type == VME_DMA_VME)) ||
                 ((src->type == VME_DMA_VME) && (dest->type == VME_DMA_PCI)))) {
 
diff --git a/drivers/staging/vme/bridges/vme_tsi148.c b/drivers/staging/vme/bridges/vme_tsi148.c
index b00a53e793e..106aa9daff4 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.c
+++ b/drivers/staging/vme/bridges/vme_tsi148.c
@@ -928,7 +928,7 @@ static int tsi148_master_set(struct vme_master_resource *image, int enabled,
         spin_lock(&image->lock);
 
         /* Let's allocate the resource here rather than further up the stack as
-         * it avoids pushing loads of bus dependant stuff up the stack. If size
+         * it avoids pushing loads of bus dependent stuff up the stack. If size
          * is zero, any existing resource will be freed.
          */
         retval = tsi148_alloc_resource(image, size);
@@ -1320,7 +1320,7 @@ static ssize_t tsi148_master_write(struct vme_master_resource *image, void *buf,
 
         /*
          * Writes are posted. We need to do a read on the VME bus to flush out
-         * all of the writes before we check for errors. We can't guarentee
+         * all of the writes before we check for errors. We can't guarantee
          * that reading the data we have just written is safe. It is believed
          * that there isn't any read, write re-ordering, so we can read any
          * location in VME space, so lets read the Device ID from the tsi148's
diff --git a/drivers/staging/vme/bridges/vme_tsi148.h b/drivers/staging/vme/bridges/vme_tsi148.h
index 9f97fa8084e..a3ac2fe9881 100644
--- a/drivers/staging/vme/bridges/vme_tsi148.h
+++ b/drivers/staging/vme/bridges/vme_tsi148.h
@@ -212,7 +212,7 @@ static const int TSI148_LCSR_OT[8] = { TSI148_LCSR_OT0, TSI148_LCSR_OT1,
 #define TSI148_LCSR_OFFSET_OTAT         0x1C
 
 /*
- * VMEbus interupt ack
+ * VMEbus interrupt ack
  * offset  200
  */
 #define TSI148_LCSR_VIACK1      0x204
@@ -613,7 +613,7 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
 /*
  *  PCI-X Status Register (CRG +$054)
  */
-#define TSI148_PCFS_PCIXSTAT_RSCEM     (1<<29)  /* Recieved Split Comp Error */
+#define TSI148_PCFS_PCIXSTAT_RSCEM     (1<<29)  /* Received Split Comp Error */
 #define TSI148_PCFS_PCIXSTAT_DMCRS_M   (7<<26)  /* max Cumulative Read Size */
 #define TSI148_PCFS_PCIXSTAT_DMOST_M   (7<<23)  /* max outstanding Split Trans
                                                  */
@@ -982,8 +982,8 @@ static const int TSI148_GCSR_MBOX[4] = { TSI148_GCSR_MBOX0,
 #define TSI148_LCSR_VICR_CNTS_IRQ1     (2<<22)  /* IRQ1 to Cntr */
 #define TSI148_LCSR_VICR_CNTS_IRQ2     (3<<22)  /* IRQ2 to Cntr */
 
-#define TSI148_LCSR_VICR_EDGIS_M       (3<<20)  /* Edge interupt MASK */
-#define TSI148_LCSR_VICR_EDGIS_DIS     (1<<20)  /* Edge interupt Disable */
+#define TSI148_LCSR_VICR_EDGIS_M       (3<<20)  /* Edge interrupt MASK */
+#define TSI148_LCSR_VICR_EDGIS_DIS     (1<<20)  /* Edge interrupt Disable */
 #define TSI148_LCSR_VICR_EDGIS_IRQ1    (2<<20)  /* IRQ1 to Edge */
 #define TSI148_LCSR_VICR_EDGIS_IRQ2    (3<<20)  /* IRQ2 to Edge */
 
diff --git a/drivers/staging/vme/vme_api.txt b/drivers/staging/vme/vme_api.txt
index a910a0c4388..4910e92c52a 100644
--- a/drivers/staging/vme/vme_api.txt
+++ b/drivers/staging/vme/vme_api.txt
@@ -6,7 +6,7 @@ Driver registration
 
 As with other subsystems within the Linux kernel, VME device drivers register
 with the VME subsystem, typically called from the devices init routine.  This is
-achieved via a call to the follwoing function:
+achieved via a call to the following function:
 
         int vme_register_driver (struct vme_driver *driver);
 
@@ -108,7 +108,7 @@ Master windows
 ==============
 
 Master windows provide access from the local processor[s] out onto the VME bus.
-The number of windows available and the available access modes is dependant on
+The number of windows available and the available access modes is dependent on
 the underlying chipset. A window must be configured before it can be used.
 
 
@@ -163,7 +163,7 @@ Slave windows
 
 Slave windows provide devices on the VME bus access into mapped portions of the
 local memory. The number of windows available and the access modes that can be
-used is dependant on the underlying chipset. A window must be configured before
+used is dependent on the underlying chipset. A window must be configured before
 it can be used.
 
 
diff --git a/drivers/staging/vt6655/card.c b/drivers/staging/vt6655/card.c
index 951a3a8ddcb..2721e079849 100644
--- a/drivers/staging/vt6655/card.c
+++ b/drivers/staging/vt6655/card.c
@@ -1186,7 +1186,7 @@ CARDbStartMeasure (
             wDuration += 1; // 1 TU for channel switching
 
             if ((LODWORD(qwStartTSF) == 0) && (HIDWORD(qwStartTSF) == 0)) {
-                // start imediately by setting start TSF == current TSF + 2 TU
+                // start immediately by setting start TSF == current TSF + 2 TU
                 LODWORD(qwStartTSF) = LODWORD(qwCurrTSF) + 2048;
                 HIDWORD(qwStartTSF) = HIDWORD(qwCurrTSF);
                 if (LODWORD(qwCurrTSF) > LODWORD(qwStartTSF)) {
diff --git a/drivers/staging/vt6655/device_main.c b/drivers/staging/vt6655/device_main.c
index efaf19bc07b..ad39c8727e9 100644
--- a/drivers/staging/vt6655/device_main.c
+++ b/drivers/staging/vt6655/device_main.c
@@ -137,7 +137,7 @@ DEVICE_PARAM(TxDescriptors1,"Number of transmit descriptors1");
 /* IP_byte_align[] is used for IP header unsigned long byte aligned
    0: indicate the IP header won't be unsigned long byte aligned.(Default) .
    1: indicate the IP header will be unsigned long byte aligned.
-      In some enviroment, the IP header should be unsigned long byte aligned,
+      In some environment, the IP header should be unsigned long byte aligned,
       or the packet will be droped when we receive it. (eg: IPVS)
 */
 DEVICE_PARAM(IP_byte_align,"Enable IP header dword aligned");
diff --git a/drivers/staging/vt6655/wcmd.c b/drivers/staging/vt6655/wcmd.c
index abd6745bc3f..c30170a2bc4 100644
--- a/drivers/staging/vt6655/wcmd.c
+++ b/drivers/staging/vt6655/wcmd.c
@@ -587,7 +587,7 @@ printk("chester-abyDesireSSID=%s\n",((PWLAN_IE_SSID)pMgmt->abyDesireSSID)->abySS
             if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED)) {
 
                 // Call mgr to begin the deauthentication
-                // reason = (3) beacuse sta has left ESS
+                // reason = (3) because sta has left ESS
                 if (pMgmt->eCurrState>= WMAC_STATE_AUTH) {
                     vMgrDeAuthenBeginSta((void *)pDevice, pMgmt, pMgmt->abyCurrBSSID, (3), &Status);
                 }
diff --git a/drivers/staging/vt6655/wmgr.h b/drivers/staging/vt6655/wmgr.h
index 141e80b843a..e3ae562f521 100644
--- a/drivers/staging/vt6655/wmgr.h
+++ b/drivers/staging/vt6655/wmgr.h
@@ -220,7 +220,7 @@ typedef enum tagWMAC_POWER_MODE {
 */
 
 
-// Tx Managment Packet descriptor
+// Tx Management Packet descriptor
 typedef struct tagSTxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
@@ -230,7 +230,7 @@ typedef struct tagSTxMgmtPacket {
 } STxMgmtPacket, *PSTxMgmtPacket;
 
 
-// Rx Managment Packet descriptor
+// Rx Management Packet descriptor
 typedef struct tagSRxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c
index 8f18578a590..5185d61564d 100644
--- a/drivers/staging/vt6656/rxtx.c
+++ b/drivers/staging/vt6656/rxtx.c
@@ -1938,7 +1938,7 @@ s_vGenerateMACHeader (
  *  Out:
  *      none
  *
- * Return Value: CMD_STATUS_PENDING if MAC Tx resource avaliable; otherwise FALSE
+ * Return Value: CMD_STATUS_PENDING if MAC Tx resource available; otherwise FALSE
  *
 -*/
 
diff --git a/drivers/staging/vt6656/wcmd.c b/drivers/staging/vt6656/wcmd.c
index b83b660b1f0..019fb52de36 100644
--- a/drivers/staging/vt6656/wcmd.c
+++ b/drivers/staging/vt6656/wcmd.c
@@ -421,7 +421,7 @@ void vRunCommand(void *hDeviceContext)
                     pMgmt->eScanState = WMAC_IS_SCANNING;
                     pDevice->byScanBBType = pDevice->byBBType;  //lucas
                     pDevice->bStopDataPkt = TRUE;
-                    // Turn off RCR_BSSID filter everytime
+                    // Turn off RCR_BSSID filter every time
                     MACvRegBitsOff(pDevice, MAC_REG_RCR, RCR_BSSID);
                     pDevice->byRxMode &= ~RCR_BSSID;
 
@@ -604,7 +604,7 @@ void vRunCommand(void *hDeviceContext)
             // if Infra mode
             if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_JOINTED)) {
                 // Call mgr to begin the deauthentication
-                // reason = (3) beacuse sta has left ESS
+                // reason = (3) because sta has left ESS
               if (pMgmt->eCurrState >= WMAC_STATE_AUTH) {
                 vMgrDeAuthenBeginSta((void *)pDevice,
                                      pMgmt,
diff --git a/drivers/staging/vt6656/wmgr.h b/drivers/staging/vt6656/wmgr.h
index 594f3a89d8a..13dfb3bf832 100644
--- a/drivers/staging/vt6656/wmgr.h
+++ b/drivers/staging/vt6656/wmgr.h
@@ -218,7 +218,7 @@ typedef enum tagWMAC_POWER_MODE {
 
 
 
-// Tx Managment Packet descriptor
+// Tx Management Packet descriptor
 typedef struct tagSTxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
@@ -228,7 +228,7 @@ typedef struct tagSTxMgmtPacket {
 } STxMgmtPacket, *PSTxMgmtPacket;
 
 
-// Rx Managment Packet descriptor
+// Rx Management Packet descriptor
 typedef struct tagSRxMgmtPacket {
 
     PUWLAN_80211HDR     p80211Header;
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasdma.c b/drivers/staging/westbridge/astoria/api/src/cyasdma.c
index 16b8ec12451..c461d4f60bf 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasdma.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasdma.c
@@ -1082,7 +1082,7 @@ cy_as_dma_received_data(cy_as_device *dev_p,
         /*
          * if the data received exceeds the size of the DMA buffer,
          * clip the data to the size of the buffer.  this can lead
-         * to loosing some data, but is not different than doing
+         * to losing some data, but is not different than doing
          * non-packet reads on the other endpoints.
          */
         if (dsize > dma_p->size - dma_p->offset)
diff --git a/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c b/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
index 60b6f352533..76821e51b81 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyaslep2pep.c
@@ -126,7 +126,7 @@ find_endpoint_directions(cy_as_device *dev_p,
         cy_as_physical_endpoint_state desired;
 
         /*
-         * note, there is no error checking here becuase
+         * note, there is no error checking here because
          * ISO error checking happens when the API is called.
          */
         for (i = 0; i < 10; i++) {
diff --git a/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c b/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
index d43dd858de5..96a86d08830 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyaslowlevel.c
@@ -432,7 +432,7 @@ cy_as_mail_box_queued_data_handler(cy_as_device *dev_p)
 * is received.  When a complete request is received, the callback
 * associated with requests on that context is called.  When a complete
 * response is recevied, the callback associated with the request that
-* generated the reponse is called.
+* generated the response is called.
 */
 void
 cy_as_mail_box_interrupt_handler(cy_as_device *dev_p)
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasmisc.c b/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
index 7852410b0a4..4564fc11df2 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasmisc.c
@@ -428,7 +428,7 @@ my_misc_callback(cy_as_device *dev_p, uint8_t context,
                                 if (v & CY_AS_MEM_P0_VM_SET_CFGMODE)
                                         cy_as_hal_print_message(
                                         "initialization message "
-                                        "recieved, but config bit "
+                                        "received, but config bit "
                                         "still set\n");
 
                                 v = cy_as_hal_read_register(dev_p->tag,
@@ -436,7 +436,7 @@ my_misc_callback(cy_as_device *dev_p, uint8_t context,
                                 if ((v & CY_AS_MEM_RST_RSTCMPT) == 0)
                                         cy_as_hal_print_message(
                                         "initialization message "
-                                        "recieved, but reset complete "
+                                        "received, but reset complete "
                                         "bit still not set\n");
                         }
                         break;
@@ -2381,7 +2381,7 @@ try_wakeup_again:
         /*
          * release the west bridge micro-_controller from reset,
          * so that firmware initialization can complete. the attempt
-         * to release antioch reset is made upto 8 times.
+         * to release antioch reset is made up to 8 times.
          */
         v = 0x03;
         count = 0x08;
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasmtp.c b/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
index 36898463387..8598364f7ab 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasmtp.c
@@ -346,7 +346,7 @@ cy_as_mtp_start(cy_as_device_handle handle,
 
                 dev_p->mtp_event_cb = event_c_b;
                 /*
-                * we register here becuase the start request may cause
+                * we register here because the start request may cause
                 * events to occur before the response to the start request.
                 */
                 cy_as_ll_register_request_callback(dev_p,
@@ -424,7 +424,7 @@ my_handle_response_mtp_stop(cy_as_device *dev_p,
                 goto destroy;
 
         /*
-        * we sucessfully shutdown the stack, so decrement
+        * we successfully shutdown the stack, so decrement
         * to make the count zero.
         */
         dev_p->mtp_count--;
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasstorage.c b/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
index 2451404b88d..7abd6a35e82 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasstorage.c
@@ -1773,7 +1773,7 @@ cy_as_storage_async_oper(cy_as_device *dev_p, cy_as_end_point_number_t ep,
         if (unit > 255)
                 return CY_AS_ERROR_NO_SUCH_UNIT;
 
-        /* We are supposed to return sucess if the number of
+        /* We are supposed to return success if the number of
         * blocks is zero
         */
         if (num_blocks == 0) {
@@ -1969,7 +1969,7 @@ cy_as_storage_sync_oper(cy_as_device *dev_p,
         if (cy_as_device_is_usb_async_pending(dev_p, 6))
                 return CY_AS_ERROR_ASYNC_PENDING;
 
-        /* We are supposed to return sucess if the number of
+        /* We are supposed to return success if the number of
         * blocks is zero
         */
         if (num_blocks == 0)
@@ -3285,7 +3285,7 @@ cy_as_sdio_extended_i_o_async(
         if (callback == 0)
                 return CY_AS_ERROR_NULL_CALLBACK;
 
-        /* We are supposed to return sucess if the number of
+        /* We are supposed to return success if the number of
          * blocks is zero
          */
         if (((misc_buf&CY_SDIO_BLOCKMODE) != 0) && (argument == 0)) {
diff --git a/drivers/staging/westbridge/astoria/api/src/cyasusb.c b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
index 92ea42503bf..1b55e611191 100644
--- a/drivers/staging/westbridge/astoria/api/src/cyasusb.c
+++ b/drivers/staging/westbridge/astoria/api/src/cyasusb.c
@@ -739,7 +739,7 @@ cy_as_usb_start(cy_as_device_handle handle,
                 cy_as_usb_reset_e_p0_state(dev_p);
 
                 /*
-                * we register here becuase the start request may cause
+                * we register here because the start request may cause
                 * events to occur before the response to the start request.
                 */
                 cy_as_ll_register_request_callback(dev_p,
@@ -867,7 +867,7 @@ my_handle_response_usb_stop(cy_as_device *dev_p,
                 goto destroy;
 
         /*
-         * we sucessfully shutdown the stack, so
+         * we successfully shutdown the stack, so
          * decrement to make the count zero.
          */
         cy_as_usb_cleanup(dev_p);
diff --git a/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c b/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
index 21cdb0637be..3bcedce13f4 100644
--- a/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
+++ b/drivers/staging/westbridge/astoria/arch/arm/mach-omap2/cyashalomap_kernel.c
@@ -87,7 +87,7 @@
 
 
 /*
- * For performance reasons, we handle storage endpoint transfers upto 4 KB
+ * For performance reasons, we handle storage endpoint transfers up to 4 KB
  * within the HAL itself.
  */
  #define CYASSTORAGE_WRITE_EP_NUM       (4)
@@ -108,12 +108,12 @@
                                 ((ep) == 6) || ((ep) == 8))
 
 /*
- * persistant, stores current GPMC interface cfg mode
+ * persistent, stores current GPMC interface cfg mode
  */
 static uint8_t pnand_16bit;
 
 /*
- * keep processing new WB DRQ in ISR untill all handled (performance feature)
+ * keep processing new WB DRQ in ISR until all handled (performance feature)
  */
 #define PROCESS_MULTIPLE_DRQ_IN_ISR (1)
 
@@ -157,7 +157,7 @@ typedef struct cy_as_hal_endpoint_dma {
          * dma_xfer_sz - size of the next dma xfer on P port
          * seg_xfer_cnt -  counts xfered bytes for in current sg_list
          *              memory segment
-         * req_xfer_cnt - total number of bytes transfered so far in
+         * req_xfer_cnt - total number of bytes transferred so far in
          *              current request
          * req_length - total request length
          */
@@ -2160,7 +2160,7 @@ void cy_as_hal_mem_set(void *ptr, uint8_t value, uint32_t cnt)
 /*
  * This function is expected to create a sleep channel.
  * The data structure that represents the sleep channel object
- * sleep channel (which is Linux "wait_queue_head_t wq" for this paticular HAL)
+ * sleep channel (which is Linux "wait_queue_head_t wq" for this particular HAL)
  * passed as a pointer, and allpocated by the caller
  * (typically as a local var on the stack) "Create" word should read as
  * "SleepOn", this func doesn't actually create anything
@@ -2364,7 +2364,7 @@ int start_o_m_a_p_kernel(const char *pgm,
          */
         cy_as_hal_gpmc_enable_16bit_bus(cy_true);
 #else
-   /* Astoria and GPMC are already in 8 bit mode, jsut initialize PNAND_CFG */
+   /* Astoria and GPMC are already in 8 bit mode, just initialize PNAND_CFG */
         ast_p_nand_casdi_write(CY_AS_MEM_PNAND_CFG, 0x0000);
 #endif
 
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
index 80dd530bc4f..6426ea61f3d 100644
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
+++ b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyashalomap_kernel.h
@@ -20,7 +20,7 @@
 */
 
 /*
- * This file contains the defintion of the hardware abstraction
+ * This file contains the definition of the hardware abstraction
  * layer on OMAP3430 talking to the West Bridge Astoria device
  */
 
diff --git a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
index 3eee192ffe8..46f06ee2935 100644
--- a/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
+++ b/drivers/staging/westbridge/astoria/arch/arm/plat-omap/include/mach/westbridge/westbridge-omap3-pnand-hal/cyasmemmap.h
@@ -51,7 +51,7 @@
  *                                                      GPMC_ADDR
  *                                                      [A8:A1]->upD[7:0]
  * INT# -GPMC_nWP_GPIO_62
- * DACK -N/C                             not conected
+ * DACK -N/C                             not connected
  * WAKEUP-GPIO_167
  * RESET-GPIO_126
  * R/B  -GPMC_WAIT2_GPIO_64
@@ -108,7 +108,7 @@
          *                                      will be monitored
          * PF_EN_ENGINE - 1- ENABLES ENGINE, but it needs to be started after
          *                                      that C ctrl reg bit 0
-         * PF_FIFO_THRESHOLD - FIFO threshhold in number of BUS(8 or 16) words
+         * PF_FIFO_THRESHOLD - FIFO threshold in number of BUS(8 or 16) words
          * PF_WEIGHTED_PRIO  - NUM of cycles granted to PFE if RND_ROBIN
          *                                      prioritization is enabled
          * PF_ROUND_ROBIN  - if enabled, gives priority to other CS, but
diff --git a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c b/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
index 0bbb8a3e191..d1996a27515 100644
--- a/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
+++ b/drivers/staging/westbridge/astoria/block/cyasblkdev_queue.c
@@ -222,7 +222,7 @@ static int cyasblkdev_queue_thread(void *d)
                         continue;
                 }
 
-                /* new req recieved, issue it to the driver  */
+                /* new req received, issue it to the driver  */
                 set_current_state(TASK_RUNNING);
 
                 #ifndef WESTBRIDGE_NDEBUG
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
index 0c0726b678a..6452a907009 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdevice.h
@@ -119,7 +119,7 @@
 #define CY_AS_REQUEST_LIST_STATE_QUEUED (0x00)
 /* The request is sent, waiting for response */
 #define CY_AS_REQUEST_LIST_STATE_WAITING (0x01)
-/* The response has been received, processing reponse */
+/* The response has been received, processing response */
 #define CY_AS_REQUEST_LIST_STATE_RECEIVED (0x02)
 /* The request/response is being canceled */
 #define CY_AS_REQUEST_LIST_STATE_CANCELING (0x03)
@@ -517,7 +517,7 @@ typedef struct cy_as_context {
         cy_as_ll_request_list_node *request_queue_p;
         /* The list node in the request queue */
         cy_as_ll_request_list_node *last_node_p;
-        /* Index upto which data is stored. */
+        /* Index up to which data is stored. */
         uint16_t queue_index;
         /* Index to the next request in the queue. */
         uint16_t rqt_index;
@@ -768,7 +768,7 @@ struct cy_as_device {
         uint32_t mtp_count;
         /* The MTP event callback supplied by the client */
         cy_as_mtp_event_callback mtp_event_cb;
-        /* The current block table to be transfered */
+        /* The current block table to be transferred */
         cy_as_mtp_block_table *tp_blk_tbl;
 
         cy_as_c_b_queue *func_cbs_mtp;
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
index 8dab5e90014..16dc9f96018 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasdma.h
@@ -108,7 +108,7 @@ typedef enum cy_as_dma_direction {
    completes a requested DMA operation.
 
    Returns
-   CY_AS_ERROR_SUCCESS - the module initialized sucessfully
+   CY_AS_ERROR_SUCCESS - the module initialized successfully
    CY_AS_ERROR_OUT_OF_MEMORY - memory allocation failed during
                 initialization
    CY_AS_ERROR_ALREADY_RUNNING - the DMA module was already running
@@ -131,7 +131,7 @@ cy_as_dma_start(
    then freeing the resources associated with each DMA endpoint.
 
    Returns
-   CY_AS_ERROR_SUCCESS - the module shutdown sucessfully
+   CY_AS_ERROR_SUCCESS - the module shutdown successfully
    CY_AS_ERROR_NOT_RUNNING - the DMA module was not running
 
    See Also
@@ -161,7 +161,7 @@ cy_as_dma_stop(
 
    Returns
    CY_AS_ERROR_SUCCESS - the traffic on the endpoint is canceled
-        sucessfully
+        successfully
 
    See Also
 */
@@ -266,7 +266,7 @@ cy_as_dma_queue_request(
    will have to maintain a list of sleep channels to wake.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the queue has drained sucessfully
+   * CY_AS_ERROR_SUCCESS - the queue has drained successfully
    * CY_AS_ERROR_INVALID_ENDPOINT - the endpoint given is not valid
    * CY_AS_ERROR_NESTED_SLEEP - CyAsDmaQueueRequest() was requested
    *    on an endpoint where CyAsDmaQueueRequest was already called
@@ -295,7 +295,7 @@ cy_as_dma_drain_queue(
    CyAsHalDmaSetupRead() functoins.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the value was set sucessfully
+   * CY_AS_ERROR_SUCCESS - the value was set successfully
    * CY_AS_ERROR_INVALID_SIZE - the size value was not valid
 */
 extern cy_as_return_status_t
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
index f78d60270d4..2cd0af1ed78 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyaserr.h
@@ -29,7 +29,7 @@
 */
 
 /* Summary
-   The function completed sucessfully
+   The function completed successfully
 */
 #define CY_AS_ERROR_SUCCESS      (0)
 
@@ -796,7 +796,7 @@
    Description
    This error is returned when an operation is attempted that cannot be
    completed while the USB stack is connected to a USB host.  In order
-   to sucessfully complete the desired operation, CyAsUsbDisconnect()
+   to successfully complete the desired operation, CyAsUsbDisconnect()
    must be called to disconnect from the host.
 */
 #define CY_AS_ERROR_USB_CONNECTED (53)
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
index 28136ad7511..5bcbe9bf2f5 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyashaldoc.h
@@ -597,7 +597,7 @@ cy_as_mem_set(
    CyAsHalSleepChannel.
 
    Returns
-   CyTrue is the initialization was sucessful, and CyFalse otherwise
+   CyTrue is the initialization was successful, and CyFalse otherwise
 
    See Also
    * CyAsHalSleepChannel
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
index 3d7063ea309..60a6fffb5d5 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasintr.h
@@ -69,7 +69,7 @@ cy_as_intr_start(
 
    Returns
    * CY_AS_ERROR_SUCCESS - the interrupt module was stopped
-   *    sucessfully
+   *    successfully
    * CY_AS_ERROR_NOT_RUNNING - the interrupt module was not
    *    running
 
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
index 2f070185056..df7c2b66cf2 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasmisc.h
@@ -620,7 +620,7 @@ cy_as_misc_in_standby(
    * Nestable: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the firmware was sucessfully downloaded
+   * CY_AS_ERROR_SUCCESS - the firmware was successfully downloaded
    * CY_AS_ERROR_INVALID_HANDLE
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device
    *    was not configured
@@ -836,7 +836,7 @@ cy_as_misc_reset(
    ownership.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the p port sucessfully acquired the
+   * CY_AS_ERROR_SUCCESS - the p port successfully acquired the
    *    resource of interest
    * CY_AS_ERROR_INVALID_HANDLE
    * CY_AS_ERROR_NOT_CONFIGURED
@@ -879,7 +879,7 @@ cy_as_misc_acquire_resource(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - the p port sucessfully released
+   * CY_AS_ERROR_SUCCESS - the p port successfully released
    *    the resource of interest
    * CY_AS_ERROR_INVALID_HANDLE
    * CY_AS_ERROR_NOT_CONFIGURED
@@ -929,7 +929,7 @@ cy_as_misc_release_resource(
 
    Returns
    * CY_AS_ERROR_SUCCESS - the trace configuration has been
-   *    sucessfully changed
+   *    successfully changed
    * CY_AS_ERROR_NO_SUCH_BUS - the bus specified does not exist
    * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
    *    pair does not exist
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
index 317805fc4ff..773b645ea7e 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasprotocol.h
@@ -756,7 +756,7 @@
          * 1 : Debug mode
 
    Description
-   This reponse is sent to return the firmware version
+   This response is sent to return the firmware version
    number to the requestor.
  */
 #define CY_RESP_FIRMWARE_VERSION (16)
@@ -3655,7 +3655,7 @@
    This request is sent to the West Bridge when the P port
    needs to send data to the Host in a Turbo Endpoint.
    Upon receiving this event, Firmware will make the end point
-   avilable for the P port. If the length is zero, then
+   available for the P port. If the length is zero, then
    firmware will send a zero length packet.
 
    Direction
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
index 64f078cf202..52b93c3e481 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasstorage.h
@@ -832,7 +832,7 @@ typedef struct cy_as_sdio_func {
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been
    *    loaded into West Bridge
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was passed in
-   * CY_AS_ERROR_SUCCESS - the module started sucessfully
+   * CY_AS_ERROR_SUCCESS - the module started successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
    *    with the West Bridge device
    * CY_AS_ERROR_OUT_OF_MEMORY
@@ -882,7 +882,7 @@ cy_as_storage_start(
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
    *    passed in
    * CY_AS_ERROR_SUCCESS - this module was shut
-   *    down sucessfully
+   *    down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred
    *    communicating with the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING
@@ -934,7 +934,7 @@ cy_as_storage_stop(
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
    *    was passed in
    * CY_AS_ERROR_SUCCESS - the function was registered
-   *    sucessfully
+   *    successfully
    * CY_AS_ERROR_NOT_RUNNING - the stack is not running
 
    See Also
@@ -981,7 +981,7 @@ cy_as_storage_register_callback(
    *    been started
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle was
    *    passed in
-   * CY_AS_ERROR_SUCCESS - this request was sucessfully
+   * CY_AS_ERROR_SUCCESS - this request was successfully
    *    transmitted to the West Bridge device
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating
    *    with the West Bridge device
@@ -1034,7 +1034,7 @@ cy_as_storage_claim(
    *    been started
    * CY_AS_ERROR_INVALID_HANDLE - an invalid handle
    *    was passed in
-   * CY_AS_ERROR_SUCCESS - the media was sucessfully
+   * CY_AS_ERROR_SUCCESS - the media was successfully
    *    released
    * CY_AS_ERROR_MEDIA_NOT_CLAIMED - the media was not
    *    claimed by the P port
@@ -1905,7 +1905,7 @@ cy_as_storage_get_transfer_amount(
    differ between SD cards.
 
    A large erase can take a while to complete depending on the SD
-   card. In such a case it is reccomended that an async call is made.
+   card. In such a case it is recommended that an async call is made.
 
    Returns
    * CY_AS_ERROR_SUCCESS - API call completed successfully
@@ -1926,7 +1926,7 @@ cy_as_storage_get_transfer_amount(
    *    required before erase is allowed
    * CY_AS_ERROR_NO_SUCH_BUS
    * CY_AS_ERROR_NO_SUCH_DEVICE
-   * CY_AS_ERROR_NOT_SUPPORTED - Erase is currenly only supported
+   * CY_AS_ERROR_NOT_SUPPORTED - Erase is currently only supported
    *    on SD and using SD only firmware
    * CY_AS_ERROR_OUT_OF_MEMORY
 
@@ -1985,7 +1985,7 @@ cy_as_storage_erase(
    *    type was made
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *    recieved from the firmware
+   *    received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *    reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made to
@@ -2047,7 +2047,7 @@ cy_as_sdio_get_c_i_s_info(
    *    pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *    recieved from the firmware
+   *    received from the firmware
 
 */
 cy_as_return_status_t
@@ -2095,7 +2095,7 @@ cy_as_sdio_query_card(
    *    pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *    recieved from the firmware
+   *    received from the firmware
    */
 cy_as_return_status_t
 cy_as_sdio_reset_card(
@@ -2139,7 +2139,7 @@ cy_as_sdio_reset_card(
    * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device pair
    *    does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was recieved
+   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
    *    from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in reading
    *    from the media
@@ -2198,7 +2198,7 @@ cy_as_sdio_direct_read(
    * CY_AS_ERROR_NO_SUCH_DEVICE - the specified media/device
    * pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was recieved
+   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
    * from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    * reading from the media
@@ -2262,7 +2262,7 @@ cy_as_sdio_direct_write(
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
    *    available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *    recieved from the firmware
+   *    received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *    reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
@@ -2319,7 +2319,7 @@ cy_as_sdio_set_blocksize(
    *    pair does not exist
    * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
-   * CY_AS_ERROR_INVALID_RESPONSE - an error message was recieved
+   * CY_AS_ERROR_INVALID_RESPONSE - an error message was received
    *    from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *    reading from the media
@@ -2396,7 +2396,7 @@ cy_as_sdio_extended_read(
    * CY_AS_ERROR_ASYNC_PENDING - an async operation is pending
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *    recieved from the firmware
+   *    received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *    reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
@@ -2471,7 +2471,7 @@ cy_as_sdio_extended_write(
    * pair does not exist
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *    recieved from the firmware
+   *    received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error in
    *    reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was made
@@ -2714,7 +2714,7 @@ cy_as_sdio_suspend(
    * CY_AS_ERROR_OUT_OF_MEMORY - insufficient memory
    *    available
    * CY_AS_ERROR_INVALID_RESPONSE - an error message was
-   *    recieved from the firmware
+   *    received from the firmware
    * CY_AS_ERROR_MEDIA_ACCESS_FAILURE - there was error
    *    in reading from the media
    * CY_AS_ERROR_INVALID_FUNCTION - An IO attempt was
diff --git a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
index 4a549e14681..e3ba9ca4c75 100644
--- a/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
+++ b/drivers/staging/westbridge/astoria/include/linux/westbridge/cyasusb.h
@@ -464,7 +464,7 @@ typedef struct cy_as_usb_end_point_config {
    be selected on a partitioned storage device.
 
    Description
-   West Bridge firmware supports creating upto two
+   West Bridge firmware supports creating up to two
    partitions on mass storage devices connected to
    West Bridge.  When there are two partitions on a device,
    the user can choose which of these partitions should be
@@ -698,7 +698,7 @@ cy_as_usb_start(
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
    *    into West Bridge
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *    the West Bridge device
 
@@ -752,7 +752,7 @@ cy_as_usb_register_callback(
    * Nestable: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -791,7 +791,7 @@ cy_as_usb_connect(
    * Nestable: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -825,7 +825,7 @@ cy_as_usb_disconnect(
    * Valid In Asynchronous Callback: Yes (if cb supplied)
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -855,13 +855,13 @@ cy_as_usb_set_enum_config(
    the USB stack
 
    Description
-   This function sends a request to West Bridge to retreive
+   This function sends a request to West Bridge to retrieve
    the current configuration
 
    * Valid In Asynchronous Callback: Yes (if cb supplied)
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -906,7 +906,7 @@ cy_as_usb_get_enum_config(
    Chapter 9.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -993,7 +993,7 @@ cy_as_usb_clear_descriptors(
    Description
    This data structure the buffer to hold the descriptor
    data, and an in/out parameter ti indicate the
-   lenght of the buffer and descriptor data in bytes.
+   length of the buffer and descriptor data in bytes.
 
    See Also
    * CyAsUsbGetDescriptor
@@ -1027,7 +1027,7 @@ typedef struct cy_as_get_descriptor_data {
    Chapter 9.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1106,7 +1106,7 @@ cy_as_usb_get_descriptor(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1140,7 +1140,7 @@ cy_as_usb_set_physical_configuration(
    Add documentation about endpoint configuration limitations
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1181,7 +1181,7 @@ cy_as_usb_set_end_point_config(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_NOT_CONFIGURED - the West Bridge device has not
    *    been configured
    * CY_AS_ERROR_NO_FIRMWARE - the firmware has not been loaded
@@ -1219,7 +1219,7 @@ cy_as_usb_get_end_point_config(
    functions store away the configuration information and this
    CyAsUsbCommitConfig() actually finds the
    best hardware configuration based on the requested endpoint
-   configuration and sends thsi optimal
+   configuration and sends this optimal
    confiuration down to the West Bridge device.
 
    * Valid In Asynchronous Callback: YES (if cb supplied)
@@ -1268,7 +1268,7 @@ cy_as_usb_commit_config(
    * Valid In Asynchronous Callback: NO
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *    the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1311,7 +1311,7 @@ cy_as_usb_read_data(
    * Valid In Asynchronous Callback: YES
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *    the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1355,7 +1355,7 @@ cy_as_usb_read_data_async(
    a zero length packet transmitted to the USB host.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *    the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1395,7 +1395,7 @@ cy_as_usb_write_data(
    in a zero length packet transmitted to the USB host.
 
    Returns
-   * CY_AS_ERROR_SUCCESS - this module was shut down sucessfully
+   * CY_AS_ERROR_SUCCESS - this module was shut down successfully
    * CY_AS_ERROR_TIMEOUT - a timeout occurred communicating with
    *    the West Bridge device
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not running
@@ -1435,7 +1435,7 @@ cy_as_usb_write_data_async(
 
    Returns
    * CY_AS_ERROR_SUCCESS - this module was shut down
-   *    sucessfully
+   *    successfully
    * CY_AS_ERROR_NOT_RUNNING - the USB stack is not
    *    running
    * CY_AS_ERROR_ASYNC_NOT_PENDING - no asynchronous USB
@@ -1791,7 +1791,7 @@ cy_as_usb_set_m_s_report_threshold(
    device should be made visible to USB.
 
    Description
-   West Bridge firmware supports the creation of upto two
+   West Bridge firmware supports the creation of up to two
    partitions on mass storage devices connected to the West Bridge
    device.  When there are two partitions on a device, the user can
    choose which of these partitions should be made visible to the
diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c
index 9cfea94bcea..c9f0e8f856a 100644
--- a/drivers/staging/winbond/mds.c
+++ b/drivers/staging/winbond/mds.c
@@ -492,7 +492,7 @@ Mds_Tx(struct wbsoft_priv *adapter)
 
                         TxDesIndex = pMds->TxDesIndex; /* Get the current ID */
                         pTxDes->Descriptor_ID = TxDesIndex;
-                        pMds->TxDesFrom[TxDesIndex] = 2; /* Storing the information of source comming from */
+                        pMds->TxDesFrom[TxDesIndex] = 2; /* Storing the information of source coming from */
                         pMds->TxDesIndex++;
                         pMds->TxDesIndex %= MAX_USB_TX_DESCRIPTOR;
 
diff --git a/drivers/staging/wlags49_h2/README.ubuntu b/drivers/staging/wlags49_h2/README.ubuntu
index 47beaec86e4..edee8b9385b 100644
--- a/drivers/staging/wlags49_h2/README.ubuntu
+++ b/drivers/staging/wlags49_h2/README.ubuntu
@@ -116,7 +116,7 @@ LICENSE
 
 The Agere Systems license applies. This is why I include the original
 README.wlags49. The instructions in that file are bogus now. I also
-include the man page. Eventhough setting parameters on the module
+include the man page. Even though setting parameters on the module
 does not work anymore but it provides some information about all the
 settings.
 
diff --git a/drivers/staging/wlags49_h2/TODO b/drivers/staging/wlags49_h2/TODO
index 14aa415b1a8..94032b6ac2b 100644
--- a/drivers/staging/wlags49_h2/TODO
+++ b/drivers/staging/wlags49_h2/TODO
@@ -1,7 +1,7 @@
 First of all, the best thing would be that this driver becomes obsolte by
 adding support for Hermes II and Hermes II.5 cards to the existing orinoco
 driver. The orinoco driver currently only supports Hermes I based cards.
-Since this will not happen by magic and has not happend until now this
+Since this will not happen by magic and has not happened until now this
 driver provides a stop-gap solution for these type of cards.
 
 Having said that, the following wishlist comes to mind to make the driver
@@ -18,7 +18,7 @@ TODO:
         - the driver is split into a Hermes II and a Hermes II.5 part, it
           would be nice to handle both with one module instead of two
         - review by the wireless developer community
-        - verify the code against the coding standards for a propper linux
+        - verify the code against the coding standards for a proper linux
           driver
         - resolve license issues (?)
 
diff --git a/drivers/staging/wlags49_h2/hcf.c b/drivers/staging/wlags49_h2/hcf.c
index d4bdd3ee8be..a73317ef935 100644
--- a/drivers/staging/wlags49_h2/hcf.c
+++ b/drivers/staging/wlags49_h2/hcf.c
@@ -540,7 +540,7 @@ HCF_STATIC hcf_16* BASED xxxx[ ] = {
 *
 *.CONDITIONS
 * Except for hcf_action with HCF_ACT_INT_FORCE_ON or HCF_ACT_INT_OFF as parameter or hcf_connect with an I/O
-* address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceeded by a call of hcf_action with
+* address (i.e. not HCF_DISCONNECT), all hcf-function calls MUST be preceded by a call of hcf_action with
 * HCF_ACT_INT_OFF as parameter.
 * Note that hcf_connect defaults to NIC interrupt disabled mode, i.e. as if hcf_action( HCF_ACT_INT_OFF )
 * was called.
@@ -843,7 +843,7 @@ hcf_16	i;
 *.MODULE                int hcf_cntl( IFBP ifbp, hcf_16 cmd )
 *.PURPOSE               Connect or disconnect a specific port to a specific network.
 *!!  ;???????????????? continue needs more explanation
-*                               recovers by means of "continue" when the connect proces in CCX mode fails
+*                               recovers by means of "continue" when the connect process in CCX mode fails
 *                               Enables or disables data transmission and reception for the NIC.
 *                               Activates static NIC configuration for a specific port at connect.
 *                               Activates static configuration for all ports at enable.
@@ -1170,12 +1170,12 @@ LTV_STRCT	x;
                 io_addr = io_base;
         }
 
-#if 0 //;? if a subsequent hcf_connect is preceeded by an hcf_disconnect the wakeup is not needed !!
+#if 0 //;? if a subsequent hcf_connect is preceded by an hcf_disconnect the wakeup is not needed !!
 #if HCF_SLEEP
     OUT_PORT_WORD( .....+HREG_IO, HREG_IO_WAKEUP_ASYNC );           //OPW not yet useable
         MSF_WAIT(800);                                                          // MSF-defined function to wait n microseconds.
         note that MSF_WAIT uses not yet defined!!!! IFB_IOBase and IFB_TickIni (via PROT_CNT_INI)
-        so be carefull if this code is restored
+        so be careful if this code is restored
 #endif // HCF_SLEEP
 #endif // 0
 
@@ -1563,7 +1563,7 @@ DESC_STRCT *p = descp->next_desc_addr;	//pointer to 2nd descriptor of frame
 * This function is called by the MSF to supply the HCF with new/more buffers for receive purposes.
 * The HCF can be used in 2 fashions: with and without encapsulation for data transfer.
 * This is controlled at compile time by the HCF_ENC bit of the HCF_ENCAP system constant.
-* As a consequence, some additional constaints apply to the number of descriptor and the buffers associated
+* As a consequence, some additional constraints apply to the number of descriptor and the buffers associated
 * with the first 2 descriptors. Independent of the encapsulation feature, the COUNT fields are ignored.
 * A special case is the supplying of the DELWA descriptor, which must be supplied as the first descriptor.
 *
@@ -1735,7 +1735,7 @@ DESC_STRCT *descp;	// pointer to start of FrameList
 * - in case encapsulation by the HCF is selected:
 *         -     The FrameList does not consists of at least 2 Descriptors.
 *         -     The first databuffer does not contain exactly the (space for) the 802.11 header (== 28 words)
-*         -     The first databuffer does not have a size to additionally accomodate the 802.3 header and the
+*         -     The first databuffer does not have a size to additionally accommodate the 802.3 header and the
 *               SNAP header of the frame after encapsulation (== 39 words).
 *         -     The second databuffer does not contain at least DA, SA and 'type/length' (==14 bytes or 7 words)
 *!! The 2nd part of the list of asserts should be kept in sync with put_frame_lst, in order to get
@@ -1762,14 +1762,14 @@ DESC_STRCT *descp;	// pointer to start of FrameList
 *       - Copy DA/SA fields from the 2nd buffer
 *   - Calculate total length of the message (snap-header + type-field + the length of all buffer fragments
 *     associated with the 802.3 frame (i.e all descriptors except the first), but not the DestinationAddress,
-*     SourceAddress and lenght-field)
+*     SourceAddress and length-field)
 *     Assert the message length
 *         Write length. Note that the message is in BE format, hence on LE platforms the length must be converted
 *         ;? THIS IS NOT WHAT CURRENTLY IS IMPLEMENTED
 *       - Write snap header. Note that the last byte of the snap header is NOT copied, that byte is already in
 *         place as result of the call to hcf_encap.
 *       Note that there are many ways to skin a cat. To express the offsets in the 1st buffer while writing
-*       the snap header, HFS_TYPE is choosen as a reference point to make it easier to grasp that the snap header
+*       the snap header, HFS_TYPE is chosen as a reference point to make it easier to grasp that the snap header
 *       and encapsualtion type are at least relative in the right.
 *8:     modify 1st descriptor to reflect moved part of the 802.3 header + Snap-header
 *       modify 2nd descriptor to skip the moved part of the 802.3 header (DA/SA
@@ -1933,7 +1933,7 @@ hcf_16	t = (hcf_16)(*type<<8) + *(type+1);																/* 2 */
 *       HCF_SUCCESS                     Success
 *!!     via cmd_exe ( type >= CFG_RID_FW_MIN )
 *       HCF_ERR_NO_NIC          NIC removed during retrieval
-*       HCF_ERR_TIME_OUT        Expected Hermes event did not occure in expected time
+*       HCF_ERR_TIME_OUT        Expected Hermes event did not occur in expected time
 *!!     via cmd_exe and setup_bap (type >= CFG_RID_FW_MIN )
 *       HCF_ERR_DEFUNCT_...     HCF is in defunct mode (bits 0x7F reflect cause)
 *
@@ -2958,7 +2958,7 @@ or
 *       hcf_service_nic is also skipped in those cases.
 *       To prevent that hcf_service_nic reports bogus information to the MSF with all - possibly difficult to
 *       debug - undesirable side effects, it is paramount to check the NIC presence. In former days the presence
-*       test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is choosen for strategy based on
+*       test was based on the Hermes register HREG_SW_0. Since in HCF_ACT_INT_OFF is chosen for strategy based on
 *       HREG_EV_STAT, this is now also used in hcf_service_nic. The motivation to change strategy is partly
 *       due to inconsistent F/W implementations with respect to HREG_SW_0 manipulation around reset and download.
 *       Note that in polled environments Card Removal is not detected by INT_OFF which makes the check in
@@ -4048,7 +4048,7 @@ hcf_32 FAR	*p4; //prevent side effects from macro
         HCFASSERT( word_len == 0 || word_len == 2 || word_len == 4, word_len )
         HCFASSERT( word_len == 0 || ((hcf_32)bufp & 1 ) == 0, (hcf_32)bufp )
         HCFASSERT( word_len <= len, MERGE2( word_len, len ) )
-        //see put_frag for an alternative implementation, but be carefull about what are int's and what are
+        //see put_frag for an alternative implementation, but be careful about what are int's and what are
         //hcf_16's
         if ( word_len ) {                                                               //.  if there is anything to convert
 hcf_8 c;
@@ -4712,7 +4712,7 @@ int rc = HCF_SUCCESS;
 *       Note that len is unsigned, so even MSF I/F violation works out O.K.
 *       The '2' in the expression "len+2" is used because 1 word is needed for L itself and 1 word is needed
 *       for the zero-sentinel
-*8:     update MailBox Info length report to MSF with "oldest" MB Info Block size. Be carefull here, if you get
+*8:     update MailBox Info length report to MSF with "oldest" MB Info Block size. Be careful here, if you get
 *       here before the MailBox is registered, you can't read from the buffer addressed by IFB_MBp (it is the
 *       Null buffer) so don't move this code till the end of this routine but keep it where there is garuanteed
 *       a buffer.
diff --git a/drivers/staging/wlags49_h2/hcfdef.h b/drivers/staging/wlags49_h2/hcfdef.h
index 4e20171b782..cb1966d8473 100644
--- a/drivers/staging/wlags49_h2/hcfdef.h
+++ b/drivers/staging/wlags49_h2/hcfdef.h
@@ -315,7 +315,7 @@ err: these values should match;
 
 #if HCF_DMA
 //************************* DMA (bus mastering)
-        // Be carefull to use these registers only at a genuine 32 bits NIC
+        // Be careful to use these registers only at a genuine 32 bits NIC
         // On 16 bits NICs, these addresses are mapped into the range 0x00 through 0x3F with all consequences
         // thereof, e.g.  HREG_DMA_CTRL register maps to HREG_CMD.
 #define HREG_DMA_CTRL                                           0x0040
diff --git a/drivers/staging/wlags49_h2/wl_wext.c b/drivers/staging/wlags49_h2/wl_wext.c
index 9e5da081537..522a31090c5 100644
--- a/drivers/staging/wlags49_h2/wl_wext.c
+++ b/drivers/staging/wlags49_h2/wl_wext.c
@@ -2575,7 +2575,7 @@ static int wireless_set_scan(struct net_device *dev, struct iw_request_info *inf
          * This looks like a nice place to test if the HCF is still
          * communicating with the card. It seems that sometimes BAP_1
          * gets corrupted. By looking at the comments in HCF the
-         * cause is still a mistery. Okay, the communication to the
+         * cause is still a mystery. Okay, the communication to the
          * card is dead, reset the card to revive.
          */
         if((lp->hcfCtx.IFB_CardStat & CARD_STAT_DEFUNCT) != 0)
@@ -3924,7 +3924,7 @@ void wl_wext_event_mic_failed( struct net_device *dev )
         memset( msg, 0, sizeof( msg ));
 
 
-        /* Becuase MIC failures are not part of the Wireless Extensions yet, they
+        /* Because MIC failures are not part of the Wireless Extensions yet, they
            must be passed as a string using an IWEVCUSTOM event. In order for the
            event to be effective, the string format must be known by both the
            driver and the supplicant. The following is the string format used by the
@@ -3999,7 +3999,7 @@ void wl_wext_event_assoc_ie( struct net_device *dev )
                 memcpy( &data.rawData, &( lp->ltvRecord.u.u8[1] ), 88 );
                 wpa_ie = wl_parse_wpa_ie( &data, &length );
 
-                /* Becuase this event (Association WPA-IE) is not part of the Wireless
+                /* Because this event (Association WPA-IE) is not part of the Wireless
                 Extensions yet, it must be passed as a string using an IWEVCUSTOM event.
                 In order for the event to be effective, the string format must be known
                 by both the driver and the supplicant. The following is the string format
diff --git a/drivers/staging/wlags49_h25/TODO b/drivers/staging/wlags49_h25/TODO
index 14aa415b1a8..94032b6ac2b 100644
--- a/drivers/staging/wlags49_h25/TODO
+++ b/drivers/staging/wlags49_h25/TODO
@@ -1,7 +1,7 @@
 First of all, the best thing would be that this driver becomes obsolte by
 adding support for Hermes II and Hermes II.5 cards to the existing orinoco
 driver. The orinoco driver currently only supports Hermes I based cards.
-Since this will not happen by magic and has not happend until now this
+Since this will not happen by magic and has not happened until now this
 driver provides a stop-gap solution for these type of cards.
 
 Having said that, the following wishlist comes to mind to make the driver
@@ -18,7 +18,7 @@ TODO:
         - the driver is split into a Hermes II and a Hermes II.5 part, it
           would be nice to handle both with one module instead of two
         - review by the wireless developer community
-        - verify the code against the coding standards for a propper linux
+        - verify the code against the coding standards for a proper linux
           driver
         - resolve license issues (?)
 
diff --git a/drivers/staging/wlan-ng/prism2sta.c b/drivers/staging/wlan-ng/prism2sta.c
index ed751f418db..21f25a21c29 100644
--- a/drivers/staging/wlan-ng/prism2sta.c
+++ b/drivers/staging/wlan-ng/prism2sta.c
@@ -1976,7 +1976,7 @@ static wlandevice_t *create_wlan(void)
 
         wlandev->nsdcaps = P80211_NSDCAP_HWFRAGMENT | P80211_NSDCAP_AUTOJOIN;
 
-        /* Initialize the device private data stucture. */
+        /* Initialize the device private data structure. */
         hw->dot11_desired_bss_type = 1;
 
         return wlandev;
diff --git a/drivers/staging/xgifb/vb_setmode.c b/drivers/staging/xgifb/vb_setmode.c
index 8762a532769..9669c22cc82 100644
--- a/drivers/staging/xgifb/vb_setmode.c
+++ b/drivers/staging/xgifb/vb_setmode.c
@@ -7834,7 +7834,7 @@ unsigned short XGI_GetRatePtrCRT2(struct xgi_hw_device_info *pXGIHWDE,
                                                 == 600)) {
                         index++;
                 }
-                /* Alan 10/19/2007; do the similiar adjustment like XGISearchCRT1Rate() */
+                /* Alan 10/19/2007; do the similar adjustment like XGISearchCRT1Rate() */
                 if ((pVBInfo->RefIndex[RefreshRateTableIndex].XRes == 1024)
                                 && (pVBInfo->RefIndex[RefreshRateTableIndex].YRes
                                                 == 768)) {
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
index 4b87951f432..d613e84aab6 100644
--- a/drivers/staging/xgifb/vgatypes.h
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -85,7 +85,7 @@ struct xgi_hw_device_info
                                             unsigned long *);
 };
 
-/* Addtional IOCTL for communication xgifb <> X driver        */
+/* Additional IOCTL for communication xgifb <> X driver        */
 /* If changing this, xgifb.h must also be changed (for xgifb) */
 
 
diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c
index 2c5fcfed593..30cbb743d9b 100644
--- a/drivers/target/target_core_alua.c
+++ b/drivers/target/target_core_alua.c
@@ -496,8 +496,8 @@ static int core_alua_state_check(
         nonop_delay_msecs = tg_pt_gp->tg_pt_gp_nonop_delay_msecs;
         spin_unlock(&tg_pt_gp_mem->tg_pt_gp_mem_lock);
         /*
-         * Process ALUA_ACCESS_STATE_ACTIVE_OPTMIZED in a seperate conditional
-         * statement so the complier knows explictly to check this case first.
+         * Process ALUA_ACCESS_STATE_ACTIVE_OPTMIZED in a separate conditional
+         * statement so the compiler knows explicitly to check this case first.
          * For the Optimized ALUA access state case, we want to process the
          * incoming fabric cmd ASAP..
          */
@@ -1157,7 +1157,7 @@ void core_alua_free_lu_gp(struct t10_alua_lu_gp *lu_gp)
                 spin_unlock(&lu_gp->lu_gp_lock);
                 /*
                  *
-                 * lu_gp_mem is assoicated with a single
+                 * lu_gp_mem is associated with a single
                  * struct se_device->dev_alua_lu_gp_mem, and is released when
                  * struct se_device is released via core_alua_free_lu_gp_mem().
                  *
@@ -1429,7 +1429,7 @@ void core_alua_free_tg_pt_gp(
                 }
                 spin_unlock(&tg_pt_gp->tg_pt_gp_lock);
                 /*
-                 * tg_pt_gp_mem is assoicated with a single
+                 * tg_pt_gp_mem is associated with a single
                  * se_port->sep_alua_tg_pt_gp_mem, and is released via
                  * core_alua_free_tg_pt_gp_mem().
                  *
@@ -1963,7 +1963,7 @@ int core_setup_alua(struct se_device *dev, int force_pt)
                 printk(KERN_INFO "%s: Enabling ALUA Emulation for SPC-3"
                         " device\n", TRANSPORT(dev)->name);
                 /*
-                 * Assoicate this struct se_device with the default ALUA
+                 * Associate this struct se_device with the default ALUA
                  * LUN Group.
                  */
                 lu_gp_mem = core_alua_allocate_lu_gp_mem(dev);
diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c
index 3fb8e32506e..d25e2082901 100644
--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -371,7 +371,7 @@ int core_update_device_list_for_node(
         if (!(enable)) {
                 /*
                  * deve->se_lun_acl will be NULL for demo-mode created LUNs
-                 * that have not been explictly concerted to MappedLUNs ->
+                 * that have not been explicitly concerted to MappedLUNs ->
                  * struct se_lun_acl, but we remove deve->alua_port_list from
                  * port->sep_alua_list. This also means that active UAs and
                  * NodeACL context specific PR metadata for demo-mode
diff --git a/drivers/target/target_core_fabric_lib.c b/drivers/target/target_core_fabric_lib.c
index d57ad672677..1e193f32489 100644
--- a/drivers/target/target_core_fabric_lib.c
+++ b/drivers/target/target_core_fabric_lib.c
@@ -433,7 +433,7 @@ char *iscsi_parse_pr_out_transport_id(
                 /*
                  * Go ahead and do the lower case conversion of the received
                  * 12 ASCII characters representing the ISID in the TransportID
-                 * for comparision against the running iSCSI session's ISID from
+                 * for comparison against the running iSCSI session's ISID from
                  * iscsi_target.c:lio_sess_get_initiator_sid()
                  */
                 for (i = 0; i < 12; i++) {
diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c
index 02f553aef43..150c4305f38 100644
--- a/drivers/target/target_core_file.c
+++ b/drivers/target/target_core_file.c
@@ -159,7 +159,7 @@ static struct se_device *fd_create_virtdevice(
 #endif
 /*      flags |= O_DIRECT; */
         /*
-         * If fd_buffered_io=1 has not been set explictly (the default),
+         * If fd_buffered_io=1 has not been set explicitly (the default),
          * use O_SYNC to force FILEIO writes to disk.
          */
         if (!(fd_dev->fbd_flags & FDBD_USE_BUFFERED_IO))
diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c
index 2521f75362c..a79f518ca6e 100644
--- a/drivers/target/target_core_pr.c
+++ b/drivers/target/target_core_pr.c
@@ -478,7 +478,7 @@ static int core_scsi3_pr_seq_non_holder(
                 break;
         }
         /*
-         * Case where the CDB is explictly allowed in the above switch
+         * Case where the CDB is explicitly allowed in the above switch
          * statement.
          */
         if (!(ret) && !(other_cdb)) {
@@ -3735,7 +3735,7 @@ static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
                 return PYX_TRANSPORT_LU_COMM_FAILURE;
 
         if (cmd->data_length < 24) {
-                printk(KERN_WARNING "SPC-PR: Recieved PR OUT parameter list"
+                printk(KERN_WARNING "SPC-PR: Received PR OUT parameter list"
                         " length too small: %u\n", cmd->data_length);
                 return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
         }
@@ -3778,7 +3778,7 @@ static int core_scsi3_emulate_pr_out(struct se_cmd *cmd, unsigned char *cdb)
          */
         if (!(spec_i_pt) && ((cdb[1] & 0x1f) != PRO_REGISTER_AND_MOVE) &&
             (cmd->data_length != 24)) {
-                printk(KERN_WARNING "SPC-PR: Recieved PR OUT illegal parameter"
+                printk(KERN_WARNING "SPC-PR: Received PR OUT illegal parameter"
                         " list length: %u\n", cmd->data_length);
                 return PYX_TRANSPORT_INVALID_PARAMETER_LIST;
         }
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index bf6aa8a9f1d..9583b23c9c8 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -719,7 +719,7 @@ static int transport_cmd_check_stop(
                         cmd->se_lun = NULL;
                         /*
                          * Some fabric modules like tcm_loop can release
-                         * their internally allocated I/O refrence now and
+                         * their internally allocated I/O reference now and
                          * struct se_cmd now.
                          */
                         if (CMD_TFO(cmd)->check_stop_free != NULL) {
@@ -2029,7 +2029,7 @@ int transport_generic_handle_data(
          * If the received CDB has aleady been ABORTED by the generic
          * target engine, we now call transport_check_aborted_status()
          * to queue any delated TASK_ABORTED status for the received CDB to the
-         * fabric module as we are expecting no futher incoming DATA OUT
+         * fabric module as we are expecting no further incoming DATA OUT
          * sequences at this point.
          */
         if (transport_check_aborted_status(cmd, 1) != 0)
@@ -2501,7 +2501,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd)
         if (SE_DEV(cmd)->dev_task_attr_type != SAM_TASK_ATTR_EMULATED)
                 return 1;
         /*
-         * Check for the existance of HEAD_OF_QUEUE, and if true return 1
+         * Check for the existence of HEAD_OF_QUEUE, and if true return 1
          * to allow the passed struct se_cmd list of tasks to the front of the list.
          */
          if (cmd->sam_task_attr == TASK_ATTR_HOQ) {
@@ -2547,7 +2547,7 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd)
         if (atomic_read(&SE_DEV(cmd)->dev_ordered_sync) != 0) {
                 /*
                  * Otherwise, add cmd w/ tasks to delayed cmd queue that
-                 * will be drained upon competion of HEAD_OF_QUEUE task.
+                 * will be drained upon completion of HEAD_OF_QUEUE task.
                  */
                 spin_lock(&SE_DEV(cmd)->delayed_cmd_lock);
                 cmd->se_cmd_flags |= SCF_DELAYED_CMD_FROM_SAM_ATTR;
@@ -2589,7 +2589,7 @@ static int transport_execute_tasks(struct se_cmd *cmd)
         }
         /*
          * Call transport_cmd_check_stop() to see if a fabric exception
-         * has occured that prevents execution.
+         * has occurred that prevents execution.
          */
         if (!(transport_cmd_check_stop(cmd, 0, TRANSPORT_PROCESSING))) {
                 /*
@@ -3109,7 +3109,7 @@ static int transport_generic_cmd_sequencer(
         if (ret != 0) {
                 cmd->transport_wait_for_tasks = &transport_nop_wait_for_tasks;
                 /*
-                 * Set SCSI additional sense code (ASC) to 'LUN Not Accessable';
+                 * Set SCSI additional sense code (ASC) to 'LUN Not Accessible';
                  * The ALUA additional sense code qualifier (ASCQ) is determined
                  * by the ALUA primary or secondary access state..
                  */
@@ -3867,7 +3867,7 @@ static void transport_generic_complete_ok(struct se_cmd *cmd)
                 }
         }
         /*
-         * Check for a callback, used by amoungst other things
+         * Check for a callback, used by amongst other things
          * XDWRITE_READ_10 emulation.
          */
         if (cmd->transport_complete_callback)
diff --git a/drivers/target/target_core_ua.c b/drivers/target/target_core_ua.c
index a2ef346087e..df355176a37 100644
--- a/drivers/target/target_core_ua.c
+++ b/drivers/target/target_core_ua.c
@@ -247,7 +247,7 @@ void core_scsi3_ua_for_check_condition(
                 }
                 /*
                  * Otherwise for the default 00b, release the UNIT ATTENTION
-                 * condition.  Return the ASC/ASCQ of the higest priority UA
+                 * condition.  Return the ASC/ASCQ of the highest priority UA
                  * (head of the list) in the outgoing CHECK_CONDITION + sense.
                  */
                 if (head) {
@@ -304,7 +304,7 @@ int core_scsi3_ua_clear_for_request_sense(
          * matching struct se_lun.
          *
          * Once the returning ASC/ASCQ values are set, we go ahead and
-         * release all of the Unit Attention conditions for the assoicated
+         * release all of the Unit Attention conditions for the associated
          * struct se_lun.
          */
         spin_lock(&deve->ua_lock);
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index b00101972f2..d5f923bcdff 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -169,7 +169,7 @@
  * Added support for Linux 2.4.x kernels.
  *
  * Revision 3.77  2001/01/09 04:00:52  eokerson
- * Linetest will now test the line, even if it has previously succeded.
+ * Linetest will now test the line, even if it has previously succeeded.
  *
  * Revision 3.76  2001/01/08 19:27:00  eokerson
  * Fixed problem with standard cable on Internet PhoneCARD.
@@ -352,7 +352,7 @@ static void ixj_fsk_alloc(IXJ *j)
                 } else {
                         j->fsksize = 8000;
                         if(ixjdebug & 0x0200) {
-                                printk("IXJ phone%d - allocate succeded\n", j->board);
+                                printk("IXJ phone%d - allocate succeeded\n", j->board);
                         }
                 }
         }
@@ -487,7 +487,7 @@ DSPbase +
 8-9             Hardware Status Register                        Read Only
 A-B             Hardware Control Register                       Read Write
 C-D Host Transmit (Write) Data Buffer Access Port (buffer input)Write Only
-E-F Host Recieve (Read) Data Buffer Access Port (buffer input)  Read Only
+E-F Host Receive (Read) Data Buffer Access Port (buffer input)  Read Only
 ************************************************************************/
 
 static inline void ixj_read_HSR(IXJ *j)
@@ -4195,7 +4195,7 @@ static void ixj_aec_start(IXJ *j, int level)
                         ixj_WriteDSPCommand(0xE338, j); /* Set Echo Suppresser Attenuation to 0dB */
 
                         /* Now we can set the AGC initial parameters and turn it on */
-                        ixj_WriteDSPCommand(0xCF90, j); /* Set AGC Minumum gain */
+                        ixj_WriteDSPCommand(0xCF90, j); /* Set AGC Minimum gain */
                         ixj_WriteDSPCommand(0x0020, j); /* to 0.125 (-18dB) */
         
                         ixj_WriteDSPCommand(0xCF91, j); /* Set AGC Maximum gain */
diff --git a/drivers/telephony/ixj.h b/drivers/telephony/ixj.h
index 4c32a43b791..2c841134f61 100644
--- a/drivers/telephony/ixj.h
+++ b/drivers/telephony/ixj.h
@@ -1149,7 +1149,7 @@ typedef struct {
         unsigned int firstring:1; /* First ring cadence is complete */
         unsigned int pstncheck:1;       /* Currently checking the PSTN Line */
         unsigned int pstn_rmr:1;
-        unsigned int x:3;       /* unsed bits */
+        unsigned int x:3;       /* unused bits */
 
 } IXJ_FLAGS;
 
diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c
index c3425bb3a1f..b6f7d52f7c3 100644
--- a/drivers/tty/hvc/hvc_iucv.c
+++ b/drivers/tty/hvc/hvc_iucv.c
@@ -255,7 +255,7 @@ static int hvc_iucv_write(struct hvc_iucv_private *priv,
                 default:
                         written = -EIO;
                 }
-                /* remove buffer if an error has occured or received data
+                /* remove buffer if an error has occurred or received data
                  * is not correct */
                 if (rc || (rb->mbuf->version != MSG_VERSION) ||
                           (rb->msg.length    != MSG_SIZE(rb->mbuf->datalen)))
@@ -620,7 +620,7 @@ static void hvc_iucv_hangup(struct hvc_iucv_private *priv)
  *              the index of an struct hvc_iucv_private instance.
  *
  * This routine notifies the HVC back-end that a tty hangup (carrier loss,
- * virtual or otherwise) has occured.
+ * virtual or otherwise) has occurred.
  * The z/VM IUCV HVC device driver ignores virtual hangups (vhangup())
  * to keep an existing IUCV communication path established.
  * (Background: vhangup() is called from user space (by getty or login) to
diff --git a/drivers/tty/hvc/hvc_vio.c b/drivers/tty/hvc/hvc_vio.c
index 5e2f52b3332..e6eea148524 100644
--- a/drivers/tty/hvc/hvc_vio.c
+++ b/drivers/tty/hvc/hvc_vio.c
@@ -1,7 +1,7 @@
 /*
  * vio driver interface to hvc_console.c
  *
- * This code was moved here to allow the remaing code to be reused as a
+ * This code was moved here to allow the remaining code to be reused as a
  * generic polling mode with semi-reliable transport driver core to the
  * console and tty subsystems.
  *
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index bef238f9ffd..4c8b6654693 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -118,7 +118,7 @@
  * arch/powerepc/include/asm/hvcserver.h
  *
  * 1.3.2 -> 1.3.3 Replaced yield() in hvcs_close() with tty_wait_until_sent() to
- * prevent possible lockup with realtime scheduling as similarily pointed out by
+ * prevent possible lockup with realtime scheduling as similarly pointed out by
  * akpm in hvc_console.  Changed resulted in the removal of hvcs_final_close()
  * to reorder cleanup operations and prevent discarding of pending data during
  * an hvcs_close().  Removed spinlock protection of hvcs_struct data members in
@@ -581,7 +581,7 @@ static void hvcs_try_write(struct hvcs_struct *hvcsd)
                         /*
                          * We are still obligated to deliver the data to the
                          * hypervisor even if the tty has been closed because
-                         * we commited to delivering it.  But don't try to wake
+                         * we committed to delivering it.  But don't try to wake
                          * a non-existent tty.
                          */
                         if (tty) {
@@ -1349,7 +1349,7 @@ static int hvcs_write(struct tty_struct *tty,
         spin_lock_irqsave(&hvcsd->lock, flags);
 
         /*
-         * Somehow an open succedded but the device was removed or the
+         * Somehow an open succeeded but the device was removed or the
          * connection terminated between the vty-server and partner vty during
          * the middle of a write operation?  This is a crummy place to do this
          * but we want to keep it all in the spinlock.
@@ -1420,7 +1420,7 @@ static int hvcs_write(struct tty_struct *tty,
 }
 
 /*
- * This is really asking how much can we guarentee that we can send or that we
+ * This is really asking how much can we guarantee that we can send or that we
  * absolutely WILL BUFFER if we can't send it.  This driver MUST honor the
  * return value, hence the reason for hvcs_struct buffering.
  */
diff --git a/drivers/tty/mxser.h b/drivers/tty/mxser.h
index 41878a69203..0bf794313ff 100644
--- a/drivers/tty/mxser.h
+++ b/drivers/tty/mxser.h
@@ -113,7 +113,7 @@
 #define MOXA_MUST_IIR_RTO               0x0C
 #define MOXA_MUST_IIR_LSR               0x06
 
-/* recieved Xon/Xoff or specical interrupt pending */
+/* received Xon/Xoff or specical interrupt pending */
 #define MOXA_MUST_IIR_XSC               0x10
 
 /* RTS/CTS change state interrupt pending */
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 176f63256b3..47f8cdb207f 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -74,7 +74,7 @@ module_param(debug, int, 0600);
 #endif
 
 /*
- * Semi-arbitary buffer size limits. 0710 is normally run with 32-64 byte
+ * Semi-arbitrary buffer size limits. 0710 is normally run with 32-64 byte
  * limits so this is plenty
  */
 #define MAX_MRU 512
@@ -82,7 +82,7 @@ module_param(debug, int, 0600);
 
 /*
  *      Each block of data we have queued to go out is in the form of
- *      a gsm_msg which holds everything we need in a link layer independant
+ *      a gsm_msg which holds everything we need in a link layer independent
  *      format
  */
 
@@ -1193,8 +1193,8 @@ static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
                 break;
                 /* Optional unsupported commands */
         case CMD_PN:    /* Parameter negotiation */
-        case CMD_RPN:   /* Remote port negotation */
-        case CMD_SNC:   /* Service negotation command */
+        case CMD_RPN:   /* Remote port negotiation */
+        case CMD_SNC:   /* Service negotiation command */
         default:
                 /* Reply to bad commands with an NSC */
                 buf[0] = command;
@@ -2026,7 +2026,7 @@ EXPORT_SYMBOL_GPL(gsm_activate_mux);
  *      @mux: mux to free
  *
  *      Dispose of allocated resources for a dead mux. No refcounting
- *      at present so the mux must be truely dead.
+ *      at present so the mux must be truly dead.
  */
 void gsm_free_mux(struct gsm_mux *gsm)
 {
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index f4f11164efe..fd0a98524d5 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -1673,7 +1673,7 @@ static void ntty_hangup(struct tty_struct *tty)
 
 /*
  * called when the userspace process writes to the tty (/dev/noz*).
- * Data is inserted into a fifo, which is then read and transfered to the modem.
+ * Data is inserted into a fifo, which is then read and transferred to the modem.
  */
 static int ntty_write(struct tty_struct *tty, const unsigned char *buffer,
                       int count)
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index 3780da8ad12..036feeb5e3f 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -2060,7 +2060,7 @@ static __init int register_PCI(int i, struct pci_dev *dev)
                         sClockPrescale = 0x19;
                         rp_baud_base[i] = 230400;
                 } else {
-                        /* mod 4 (devide by 5) prescale */
+                        /* mod 4 (divide by 5) prescale */
                         sClockPrescale = 0x14;
                         rp_baud_base[i] = 460800;
                 }
@@ -2183,7 +2183,7 @@ static int __init init_ISA(int i)
                 sClockPrescale = 0x19;  /* mod 9 (divide by 10) prescale */
                 rp_baud_base[i] = 230400;
         } else {
-                sClockPrescale = 0x14;  /* mod 4 (devide by 5) prescale */
+                sClockPrescale = 0x14;  /* mod 4 (divide by 5) prescale */
                 rp_baud_base[i] = 460800;
         }
 
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index b3b881bc471..6611535f444 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -1629,7 +1629,7 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
                             up->port.iotype == UPIO_DWAPB32) &&
                           (iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
                         /* The DesignWare APB UART has an Busy Detect (0x07)
-                         * interrupt meaning an LCR write attempt occured while the
+                         * interrupt meaning an LCR write attempt occurred while the
                          * UART was busy. The interrupt must be cleared by reading
                          * the UART status register (USR) and the LCR re-written. */
                         unsigned int status;
diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c
index 8b8930f700b..738cec9807d 100644
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -433,7 +433,7 @@ static void __devexit sbs_exit(struct pci_dev *dev)
 /*
  * SIIG serial cards have an PCI interface chip which also controls
  * the UART clocking frequency. Each UART can be clocked independently
- * (except cards equiped with 4 UARTs) and initial clocking settings
+ * (except cards equipped with 4 UARTs) and initial clocking settings
  * are stored in the EEPROM chip. It can cause problems because this
  * version of serial driver doesn't support differently clocked UART's
  * on single PCI card. To prevent this, initialization functions set
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 57731e87008..6deee4e546b 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -520,7 +520,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap)
 
         /*
          * We don't have a TX buffer queued, so try to queue one.
-         * If we succesfully queued a buffer, mask the TX IRQ.
+         * If we successfully queued a buffer, mask the TX IRQ.
          */
         if (pl011_dma_tx_refill(uap) > 0) {
                 uap->im &= ~UART011_TXIM;
diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c
index 53a46822705..8a869e58f6d 100644
--- a/drivers/tty/serial/icom.c
+++ b/drivers/tty/serial/icom.c
@@ -1248,7 +1248,7 @@ static void icom_set_termios(struct uart_port *port,
                 }
         }
 
-        /* Enable Transmitter and Reciever */
+        /* Enable Transmitter and Receiver */
         offset =
             (unsigned long) &ICOM_PORT->statStg->rcv[0] -
             (unsigned long) ICOM_PORT->statStg;
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index dfcf4b1878a..cb36b0d4ef3 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -78,7 +78,7 @@
 #define  URXD_FRMERR     (1<<12)
 #define  URXD_BRK        (1<<11)
 #define  URXD_PRERR      (1<<10)
-#define  UCR1_ADEN       (1<<15) /* Auto dectect interrupt */
+#define  UCR1_ADEN       (1<<15) /* Auto detect interrupt */
 #define  UCR1_ADBR       (1<<14) /* Auto detect baud rate */
 #define  UCR1_TRDYEN     (1<<13) /* Transmitter ready interrupt enable */
 #define  UCR1_IDEN       (1<<12) /* Idle condition interrupt */
diff --git a/drivers/tty/serial/ip22zilog.c b/drivers/tty/serial/ip22zilog.c
index ebff4a1d4bc..7b1cda59ebb 100644
--- a/drivers/tty/serial/ip22zilog.c
+++ b/drivers/tty/serial/ip22zilog.c
@@ -375,7 +375,7 @@ static void ip22zilog_transmit_chars(struct uart_ip22zilog_port *up,
                  * be nice to transmit console writes just like we normally would for
                  * a TTY line. (ie. buffered and TX interrupt driven).  That is not
                  * easy because console writes cannot sleep.  One solution might be
-                 * to poll on enough port->xmit space becomming free.  -DaveM
+                 * to poll on enough port->xmit space becoming free.  -DaveM
                  */
                 if (!(status & Tx_BUF_EMP))
                         return;
diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h
index 38a509c684c..b704c8ce0d7 100644
--- a/drivers/tty/serial/jsm/jsm.h
+++ b/drivers/tty/serial/jsm/jsm.h
@@ -273,7 +273,7 @@ struct neo_uart_struct {
          u8 fctr;               /* WR   FCTR - Feature Control Reg */
          u8 efr;                /* WR   EFR - Enhanced Function Reg */
          u8 tfifo;              /* WR   TXCNT/TXTRG - Transmit FIFO Reg */
-         u8 rfifo;              /* WR   RXCNT/RXTRG - Recieve FIFO Reg */
+         u8 rfifo;              /* WR   RXCNT/RXTRG - Receive FIFO Reg */
          u8 xoffchar1;  /* WR   XOFF 1 - XOff Character 1 Reg */
          u8 xoffchar2;  /* WR   XOFF 2 - XOff Character 2 Reg */
          u8 xonchar1;   /* WR   XON 1 - Xon Character 1 Reg */
diff --git a/drivers/tty/serial/jsm/jsm_neo.c b/drivers/tty/serial/jsm/jsm_neo.c
index 7960d9633c1..4538c3e3646 100644
--- a/drivers/tty/serial/jsm/jsm_neo.c
+++ b/drivers/tty/serial/jsm/jsm_neo.c
@@ -381,7 +381,7 @@ static void neo_copy_data_from_uart_to_queue(struct jsm_channel *ch)
                 /* Copy data from uart to the queue */
                 memcpy_fromio(ch->ch_rqueue + head, &ch->ch_neo_uart->txrxburst, n);
                 /*
-                 * Since RX_FIFO_DATA_ERROR was 0, we are guarenteed
+                 * Since RX_FIFO_DATA_ERROR was 0, we are guaranteed
                  * that all the data currently in the FIFO is free of
                  * breaks and parity/frame/orun errors.
                  */
@@ -1210,7 +1210,7 @@ static irqreturn_t neo_intr(int irq, void *voidbrd)
                          * Why would I check EVERY possibility of type of
                          * interrupt, when we know its TXRDY???
                          * Becuz for some reason, even tho we got triggered for TXRDY,
-                         * it seems to be occassionally wrong. Instead of TX, which
+                         * it seems to be occasionally wrong. Instead of TX, which
                          * it should be, I was getting things like RXDY too. Weird.
                          */
                         neo_parse_isr(brd, port);
diff --git a/drivers/tty/serial/max3107.h b/drivers/tty/serial/max3107.h
index 7ab63239250..8415fc723b9 100644
--- a/drivers/tty/serial/max3107.h
+++ b/drivers/tty/serial/max3107.h
@@ -369,7 +369,7 @@ struct max3107_port {
         struct spi_device *spi;
 
 #if defined(CONFIG_GPIOLIB)
-        /* GPIO chip stucture */
+        /* GPIO chip structure */
         struct gpio_chip chip;
 #endif
 
diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c
index 37e13c3d91d..2f548af4e98 100644
--- a/drivers/tty/serial/mrst_max3110.c
+++ b/drivers/tty/serial/mrst_max3110.c
@@ -23,7 +23,7 @@
  *    1 word. If SPI master controller doesn't support sclk frequency change,
  *    then the char need be sent out one by one with some delay
  *
- * 2. Currently only RX availabe interrrupt is used, no need for waiting TXE
+ * 2. Currently only RX available interrrupt is used, no need for waiting TXE
  *    interrupt for a low speed UART device
  */
 
diff --git a/drivers/tty/serial/mrst_max3110.h b/drivers/tty/serial/mrst_max3110.h
index d1ef43af397..c37ea48c825 100644
--- a/drivers/tty/serial/mrst_max3110.h
+++ b/drivers/tty/serial/mrst_max3110.h
@@ -21,7 +21,7 @@
 
 #define WC_IRQ_MASK             (0xF << 8)
 #define WC_TXE_IRQ_ENABLE       (1 << 11)       /* TX empty irq */
-#define WC_RXA_IRQ_ENABLE       (1 << 10)       /* RX availabe irq */
+#define WC_RXA_IRQ_ENABLE       (1 << 10)       /* RX available irq */
 #define WC_PAR_HIGH_IRQ_ENABLE  (1 << 9)
 #define WC_REC_ACT_IRQ_ENABLE   (1 << 8)
 
diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c
index b906f11f7c1..624701f8138 100644
--- a/drivers/tty/serial/msm_serial_hs.c
+++ b/drivers/tty/serial/msm_serial_hs.c
@@ -495,7 +495,7 @@ static void msm_hs_pm(struct uart_port *uport, unsigned int state,
  *
  * Interrupts should be disabled before we are called, as
  * we modify Set Baud rate
- * Set receive stale interrupt level, dependant on Bit Rate
+ * Set receive stale interrupt level, dependent on Bit Rate
  * Goal is to have around 8 ms before indicate stale.
  * roundup (((Bit Rate * .008) / 10) + 1
  */
@@ -1350,7 +1350,7 @@ static irqreturn_t msm_hs_rx_wakeup_isr(int irq, void *dev)
 
         spin_lock_irqsave(&uport->lock, flags);
         if (msm_uport->clk_state == MSM_HS_CLK_OFF) {
-                /* ignore the first irq - it is a pending irq that occured
+                /* ignore the first irq - it is a pending irq that occurred
                  * before enable_irq() */
                 if (msm_uport->rx_wakeup.ignore)
                         msm_uport->rx_wakeup.ignore = 0;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 763537943a5..47cadf47414 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -13,7 +13,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
- * Note: This driver is made seperate from 8250 driver as we cannot
+ * Note: This driver is made separate from 8250 driver as we cannot
  * over load 8250 driver with omap platform specific configuration for
  * features like DMA, it makes easier to implement features like DMA and
  * hardware flow control and software flow control configuration with
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index 5b9cde79e4e..e1c8d4f1ce5 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -330,7 +330,7 @@ static struct tty_struct *pmz_receive_chars(struct uart_pmac_port *uap)
                  * When that happens, I disable the receive side of the driver.
                  * Note that what I've been experiencing is a real irq loop where
                  * I'm getting flooded regardless of the actual port speed.
-                 * Something stange is going on with the HW
+                 * Something strange is going on with the HW
                  */
                 if ((++loops) > 1000)
                         goto flood;
@@ -396,7 +396,7 @@ static void pmz_transmit_chars(struct uart_pmac_port *uap)
                  * be nice to transmit console writes just like we normally would for
                  * a TTY line. (ie. buffered and TX interrupt driven).  That is not
                  * easy because console writes cannot sleep.  One solution might be
-                 * to poll on enough port->xmit space becomming free.  -DaveM
+                 * to poll on enough port->xmit space becoming free.  -DaveM
                  */
                 if (!(status & Tx_BUF_EMP))
                         return;
@@ -809,7 +809,7 @@ static int pmz_set_scc_power(struct uart_pmac_port *uap, int state)
 #endif /* !CONFIG_PPC_PMAC */
 
 /*
- * FixZeroBug....Works around a bug in the SCC receving channel.
+ * FixZeroBug....Works around a bug in the SCC receiving channel.
  * Inspired from Darwin code, 15 Sept. 2000  -DanM
  *
  * The following sequence prevents a problem that is seen with O'Hare ASICs
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 2335edafe90..9e2fa8d784e 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -64,7 +64,7 @@
 #define tx_enabled(port) ((port)->unused[0])
 #define rx_enabled(port) ((port)->unused[1])
 
-/* flag to ignore all characters comming in */
+/* flag to ignore all characters coming in */
 #define RXSTAT_DUMMY_READ (0x10000000)
 
 static inline struct s3c24xx_uart_port *to_ourport(struct uart_port *port)
@@ -291,7 +291,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
                 goto out;
         }
 
-        /* if there isnt anything more to transmit, or the uart is now
+        /* if there isn't anything more to transmit, or the uart is now
          * stopped, disable the uart and exit
         */
 
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index eb7958c675a..a7b083f4ea7 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -812,7 +812,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr)
 }
 
 /*
- * Here we define a transistion notifier so that we can update all of our
+ * Here we define a transition notifier so that we can update all of our
  * ports' baud rate when the peripheral clock changes.
  */
 static int sci_notifier(struct notifier_block *self,
diff --git a/drivers/tty/serial/sn_console.c b/drivers/tty/serial/sn_console.c
index cff9a306660..377ae74e715 100644
--- a/drivers/tty/serial/sn_console.c
+++ b/drivers/tty/serial/sn_console.c
@@ -146,7 +146,7 @@ static struct sn_sal_ops intr_ops = {
 };
 
 /* the console does output in two distinctly different ways:
- * synchronous (raw) and asynchronous (buffered).  initally, early_printk
+ * synchronous (raw) and asynchronous (buffered).  initially, early_printk
  * does synchronous output.  any data written goes directly to the SAL
  * to be output (incidentally, it is internally buffered by the SAL)
  * after interrupts and timers are initialized and available for use,
@@ -481,7 +481,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
         while (port->sc_ops->sal_input_pending()) {
                 ch = port->sc_ops->sal_getc();
                 if (ch < 0) {
-                        printk(KERN_ERR "sn_console: An error occured while "
+                        printk(KERN_ERR "sn_console: An error occurred while "
                                "obtaining data from the console (0x%0x)\n", ch);
                         break;
                 }
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 99ff9abf57c..8e916e76b7b 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -474,7 +474,7 @@ static void sunzilog_transmit_chars(struct uart_sunzilog_port *up,
                  * be nice to transmit console writes just like we normally would for
                  * a TTY line. (ie. buffered and TX interrupt driven).  That is not
                  * easy because console writes cannot sleep.  One solution might be
-                 * to poll on enough port->xmit space becomming free.  -DaveM
+                 * to poll on enough port->xmit space becoming free.  -DaveM
                  */
                 if (!(status & Tx_BUF_EMP))
                         return;
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index 18888d005a0..27da23d98e3 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -4072,7 +4072,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
         
         if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
                 info->device_name, info ) < 0 ) {
-                printk( "%s(%d):Cant request interrupt on device %s IRQ=%d\n",
+                printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
                         __FILE__,__LINE__,info->device_name, info->irq_level );
                 goto errout;
         }
@@ -4095,7 +4095,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
                 info->memory_base = ioremap_nocache(info->phys_memory_base,
                                                                 0x40000);
                 if (!info->memory_base) {
-                        printk( "%s(%d):Cant map shared memory on device %s MemAddr=%08X\n",
+                        printk( "%s(%d):Can't map shared memory on device %s MemAddr=%08X\n",
                                 __FILE__,__LINE__,info->device_name, info->phys_memory_base );
                         goto errout;
                 }
@@ -4109,7 +4109,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
                 info->lcr_base = ioremap_nocache(info->phys_lcr_base,
                                                                 PAGE_SIZE);
                 if (!info->lcr_base) {
-                        printk( "%s(%d):Cant map LCR memory on device %s MemAddr=%08X\n",
+                        printk( "%s(%d):Can't map LCR memory on device %s MemAddr=%08X\n",
                                 __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
                         goto errout;
                 }
@@ -4119,7 +4119,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
                 /* claim DMA channel */
                 
                 if (request_dma(info->dma_level,info->device_name) < 0){
-                        printk( "%s(%d):Cant request DMA channel on device %s DMA=%d\n",
+                        printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
                                 __FILE__,__LINE__,info->device_name, info->dma_level );
                         mgsl_release_resources( info );
                         return -ENODEV;
@@ -4132,7 +4132,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
         }
         
         if ( mgsl_allocate_dma_buffers(info) < 0 ) {
-                printk( "%s(%d):Cant allocate DMA buffers on device %s DMA=%d\n",
+                printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
                         __FILE__,__LINE__,info->device_name, info->dma_level );
                 goto errout;
         }       
diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c
index a35dd549a00..18b48cd3b41 100644
--- a/drivers/tty/synclink_gt.c
+++ b/drivers/tty/synclink_gt.c
@@ -3491,7 +3491,7 @@ static int claim_resources(struct slgt_info *info)
 
         info->reg_addr = ioremap_nocache(info->phys_reg_addr, SLGT_REG_SIZE);
         if (!info->reg_addr) {
-                DBGERR(("%s cant map device registers, addr=%08X\n",
+                DBGERR(("%s can't map device registers, addr=%08X\n",
                         info->device_name, info->phys_reg_addr));
                 info->init_error = DiagStatus_CantAssignPciResources;
                 goto errout;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 32734369447..c77831c7675 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -3595,7 +3595,7 @@ static int claim_resources(SLMP_INFO *info)
         info->memory_base = ioremap_nocache(info->phys_memory_base,
                                                                 SCA_MEM_SIZE);
         if (!info->memory_base) {
-                printk( "%s(%d):%s Cant map shared memory, MemAddr=%08X\n",
+                printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
                         __FILE__,__LINE__,info->device_name, info->phys_memory_base );
                 info->init_error = DiagStatus_CantAssignPciResources;
                 goto errout;
@@ -3603,7 +3603,7 @@ static int claim_resources(SLMP_INFO *info)
 
         info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
         if (!info->lcr_base) {
-                printk( "%s(%d):%s Cant map LCR memory, MemAddr=%08X\n",
+                printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
                         __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
                 info->init_error = DiagStatus_CantAssignPciResources;
                 goto errout;
@@ -3612,7 +3612,7 @@ static int claim_resources(SLMP_INFO *info)
 
         info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
         if (!info->sca_base) {
-                printk( "%s(%d):%s Cant map SCA memory, MemAddr=%08X\n",
+                printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
                         __FILE__,__LINE__,info->device_name, info->phys_sca_base );
                 info->init_error = DiagStatus_CantAssignPciResources;
                 goto errout;
@@ -3622,7 +3622,7 @@ static int claim_resources(SLMP_INFO *info)
         info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
                                                                 PAGE_SIZE);
         if (!info->statctrl_base) {
-                printk( "%s(%d):%s Cant map SCA Status/Control memory, MemAddr=%08X\n",
+                printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
                         __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
                 info->init_error = DiagStatus_CantAssignPciResources;
                 goto errout;
@@ -3869,7 +3869,7 @@ static void device_init(int adapter_num, struct pci_dev *pdev)
                                         port_array[0]->irq_flags,
                                         port_array[0]->device_name,
                                         port_array[0]) < 0 ) {
-                        printk( "%s(%d):%s Cant request interrupt, IRQ=%d\n",
+                        printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
                                 __FILE__,__LINE__,
                                 port_array[0]->device_name,
                                 port_array[0]->irq_level );
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 936a4ead6c2..d7d50b48287 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2134,7 +2134,7 @@ done:
  *      actually has driver level meaning and triggers a VC resize.
  *
  *      Locking:
- *              Driver dependant. The default do_resize method takes the
+ *              Driver dependent. The default do_resize method takes the
  *      tty termios mutex and ctrl_lock. The console takes its own lock
  *      then calls into the default method.
  */
@@ -2155,7 +2155,7 @@ static int tiocswinsz(struct tty_struct *tty, struct winsize __user *arg)
  *      tioccons        -       allow admin to move logical console
  *      @file: the file to become console
  *
- *      Allow the adminstrator to move the redirected console device
+ *      Allow the administrator to move the redirected console device
  *
  *      Locking: uses redirect_lock to guard the redirect information
  */
@@ -2290,7 +2290,7 @@ EXPORT_SYMBOL_GPL(tty_get_pgrp);
 /**
  *      tiocgpgrp               -       get process group
  *      @tty: tty passed by user
- *      @real_tty: tty side of the tty pased by the user if a pty else the tty
+ *      @real_tty: tty side of the tty passed by the user if a pty else the tty
  *      @p: returned pid
  *
  *      Obtain the process group of the tty. If there is no process group
@@ -2367,7 +2367,7 @@ out_unlock:
 /**
  *      tiocgsid                -       get session id
  *      @tty: tty passed by user
- *      @real_tty: tty side of the tty pased by the user if a pty else the tty
+ *      @real_tty: tty side of the tty passed by the user if a pty else the tty
  *      @p: pointer to returned session id
  *
  *      Obtain the session id of the tty. If there is no session
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index 1a1135d580a..21574cb3234 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -247,7 +247,7 @@ speed_t tty_termios_baud_rate(struct ktermios *termios)
         cbaud = termios->c_cflag & CBAUD;
 
 #ifdef BOTHER
-        /* Magic token for arbitary speed via c_ispeed/c_ospeed */
+        /* Magic token for arbitrary speed via c_ispeed/c_ospeed */
         if (cbaud == BOTHER)
                 return termios->c_ospeed;
 #endif
@@ -283,7 +283,7 @@ speed_t tty_termios_input_baud_rate(struct ktermios *termios)
         if (cbaud == B0)
                 return tty_termios_baud_rate(termios);
 
-        /* Magic token for arbitary speed via c_ispeed*/
+        /* Magic token for arbitrary speed via c_ispeed*/
         if (cbaud == BOTHER)
                 return termios->c_ispeed;
 
@@ -449,7 +449,7 @@ EXPORT_SYMBOL(tty_get_baud_rate);
  *      @new: New termios
  *      @old: Old termios
  *
- *      Propogate the hardware specific terminal setting bits from
+ *      Propagate the hardware specific terminal setting bits from
  *      the old termios structure to the new one. This is used in cases
  *      where the hardware does not support reconfiguration or as a helper
  *      in some cases where only minimal reconfiguration is supported
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index c83cdfb56fc..4bea1efaec9 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -3963,7 +3963,7 @@ void reset_palette(struct vc_data *vc)
  *  of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints, 
  *  depending on width) reserved for each character which is kinda wasty, but 
  *  this is done in order to maintain compatibility with the EGA/VGA fonts. It 
- *  is upto the actual low-level console-driver convert data into its favorite
+ *  is up to the actual low-level console-driver convert data into its favorite
  *  format (maybe we should add a `fontoffset' field to the `display'
  *  structure so we won't have to convert the fontdata all the time.
  *  /Jes
diff --git a/drivers/uio/uio_pruss.c b/drivers/uio/uio_pruss.c
index daf6e77de2b..e67b566e7aa 100644
--- a/drivers/uio/uio_pruss.c
+++ b/drivers/uio/uio_pruss.c
@@ -39,7 +39,7 @@ module_param(extram_pool_sz, int, 0);
 MODULE_PARM_DESC(extram_pool_sz, "external ram pool size to allocate");
 
 /*
- * Host event IRQ numbers from PRUSS - PRUSS can generate upto 8 interrupt
+ * Host event IRQ numbers from PRUSS - PRUSS can generate up to 8 interrupt
  * events to AINTC of ARM host processor - which can be used for IPC b/w PRUSS
  * firmware and user space application, async notification from PRU firmware
  * to user space application
diff --git a/drivers/usb/atm/ueagle-atm.c b/drivers/usb/atm/ueagle-atm.c
index b268e9fccb4..e71521ce301 100644
--- a/drivers/usb/atm/ueagle-atm.c
+++ b/drivers/usb/atm/ueagle-atm.c
@@ -1283,7 +1283,7 @@ static void uea_set_bulk_timeout(struct uea_softc *sc, u32 dsrate)
 
         /* in bulk mode the modem have problem with high rate
          * changing internal timing could improve things, but the
-         * value is misterious.
+         * value is mysterious.
          * ADI930 don't support it (-EPIPE error).
          */
 
@@ -1743,7 +1743,7 @@ static int uea_send_cmvs_e1(struct uea_softc *sc)
                                 goto out;
                 }
         } else {
-                /* This realy should not happen */
+                /* This really should not happen */
                 uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
                 goto out;
         }
@@ -1798,7 +1798,7 @@ static int uea_send_cmvs_e4(struct uea_softc *sc)
                                 goto out;
                 }
         } else {
-                /* This realy should not happen */
+                /* This really should not happen */
                 uea_err(INS_TO_USBDEV(sc), "bad cmvs version %d\n", ver);
                 goto out;
         }
@@ -1829,7 +1829,7 @@ static int uea_start_reset(struct uea_softc *sc)
 
         /* mask interrupt */
         sc->booting = 1;
-        /* We need to set this here because, a ack timeout could have occured,
+        /* We need to set this here because, a ack timeout could have occurred,
          * but before we start the reboot, the ack occurs and set this to 1.
          * So we will failed to wait Ready CMV.
          */
diff --git a/drivers/usb/c67x00/c67x00-drv.c b/drivers/usb/c67x00/c67x00-drv.c
index b6d49234e52..62050f7a4f9 100644
--- a/drivers/usb/c67x00/c67x00-drv.c
+++ b/drivers/usb/c67x00/c67x00-drv.c
@@ -27,7 +27,7 @@
  * the link between the common hardware parts and the subdrivers (e.g.
  * interrupt handling).
  *
- * The c67x00 has 2 SIE's (serial interface engine) wich can be configured
+ * The c67x00 has 2 SIE's (serial interface engine) which can be configured
  * to be host, device or OTG (with some limitations, E.G. only SIE1 can be OTG).
  *
  * Depending on the platform configuration, the SIE's are created and
diff --git a/drivers/usb/c67x00/c67x00-hcd.h b/drivers/usb/c67x00/c67x00-hcd.h
index 74e44621e31..e3d493d4d61 100644
--- a/drivers/usb/c67x00/c67x00-hcd.h
+++ b/drivers/usb/c67x00/c67x00-hcd.h
@@ -34,7 +34,7 @@
 /*
  * The following parameters depend on the CPU speed, bus speed, ...
  * These can be tuned for specific use cases, e.g. if isochronous transfers
- * are very important, bandwith can be sacrificed to guarantee that the
+ * are very important, bandwidth can be sacrificed to guarantee that the
  * 1ms deadline will be met.
  * If bulk transfers are important, the MAX_FRAME_BW can be increased,
  * but some (or many) isochronous deadlines might not be met.
diff --git a/drivers/usb/c67x00/c67x00-sched.c b/drivers/usb/c67x00/c67x00-sched.c
index f6b3c253f3f..a03fbc15fa9 100644
--- a/drivers/usb/c67x00/c67x00-sched.c
+++ b/drivers/usb/c67x00/c67x00-sched.c
@@ -907,7 +907,7 @@ static inline int c67x00_end_of_data(struct c67x00_td *td)
 
 /* Remove all td's from the list which come
  * after last_td and are meant for the same pipe.
- * This is used when a short packet has occured */
+ * This is used when a short packet has occurred */
 static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
                                      struct c67x00_td *last_td)
 {
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index 5eeb570b9a6..b4ea54dbf32 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -52,7 +52,7 @@
  */
 
 /*
- * The only reason to have several buffers is to accomodate assumptions
+ * The only reason to have several buffers is to accommodate assumptions
  * in line disciplines. They ask for empty space amount, receive our URB size,
  * and proceed to issue several 1-character writes, assuming they will fit.
  * The very first write takes a complete URB. Fortunately, this only happens
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 6a54634ab82..385acb895ab 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -483,7 +483,7 @@ static ssize_t usbtmc_read(struct file *filp, char __user *buf,
                 }
 
                 done += n_characters;
-                /* Terminate if end-of-message bit recieved from device */
+                /* Terminate if end-of-message bit received from device */
                 if ((buffer[8] &  0x01) && (actual >= n_characters + 12))
                         remaining = 0;
                 else
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 02b4dbfa488..8eed05d2383 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -700,7 +700,7 @@ void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
         /* The USB 2.0 spec says 256 ms.  This is close enough and won't
          * exceed that limit if HZ is 100. The math is more clunky than
          * maybe expected, this is to make sure that all timers for USB devices
-         * fire at the same time to give the CPU a break inbetween */
+         * fire at the same time to give the CPU a break in between */
         if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
                         (length == 0 && hcd->status_urb != NULL))
                 mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 564eaa5525d..8fb754916c6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1649,7 +1649,7 @@ void usb_disconnect(struct usb_device **pdev)
 
         /* mark the device as inactive, so any further urb submissions for
          * this device (and any of its children) will fail immediately.
-         * this quiesces everyting except pending urbs.
+         * this quiesces everything except pending urbs.
          */
         usb_set_device_state(udev, USB_STATE_NOTATTACHED);
         dev_info(&udev->dev, "USB disconnect, device number %d\n",
diff --git a/drivers/usb/early/ehci-dbgp.c b/drivers/usb/early/ehci-dbgp.c
index 0bc06e2bcfc..a6a350f5827 100644
--- a/drivers/usb/early/ehci-dbgp.c
+++ b/drivers/usb/early/ehci-dbgp.c
@@ -648,7 +648,7 @@ static int ehci_reset_port(int port)
                 if (!(portsc & PORT_CONNECT))
                         return -ENOTCONN;
 
-                /* bomb out completely if something weird happend */
+                /* bomb out completely if something weird happened */
                 if ((portsc & PORT_CSC))
                         return -EINVAL;
 
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index f8dd7269d79..6e42aab7580 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -278,7 +278,7 @@ static int udc_enable_dev_setup_interrupts(struct udc *dev)
         return 0;
 }
 
-/* Calculates fifo start of endpoint based on preceeding endpoints */
+/* Calculates fifo start of endpoint based on preceding endpoints */
 static int udc_set_txfifo_addr(struct udc_ep *ep)
 {
         struct udc      *dev;
@@ -2137,7 +2137,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
         if (use_dma) {
                 /* BNA event ? */
                 if (tmp & AMD_BIT(UDC_EPSTS_BNA)) {
-                        DBG(dev, "BNA ep%dout occured - DESPTR = %x \n",
+                        DBG(dev, "BNA ep%dout occurred - DESPTR = %x \n",
                                         ep->num, readl(&ep->regs->desptr));
                         /* clear BNA */
                         writel(tmp | AMD_BIT(UDC_EPSTS_BNA), &ep->regs->sts);
@@ -2151,7 +2151,7 @@ static irqreturn_t udc_data_out_isr(struct udc *dev, int ep_ix)
         }
         /* HE event ? */
         if (tmp & AMD_BIT(UDC_EPSTS_HE)) {
-                dev_err(&dev->pdev->dev, "HE ep%dout occured\n", ep->num);
+                dev_err(&dev->pdev->dev, "HE ep%dout occurred\n", ep->num);
 
                 /* clear HE */
                 writel(tmp | AMD_BIT(UDC_EPSTS_HE), &ep->regs->sts);
@@ -2354,7 +2354,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
                 /* BNA ? */
                 if (epsts & AMD_BIT(UDC_EPSTS_BNA)) {
                         dev_err(&dev->pdev->dev,
-                                "BNA ep%din occured - DESPTR = %08lx \n",
+                                "BNA ep%din occurred - DESPTR = %08lx \n",
                                 ep->num,
                                 (unsigned long) readl(&ep->regs->desptr));
 
@@ -2367,7 +2367,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
         /* HE event ? */
         if (epsts & AMD_BIT(UDC_EPSTS_HE)) {
                 dev_err(&dev->pdev->dev,
-                        "HE ep%dn occured - DESPTR = %08lx \n",
+                        "HE ep%dn occurred - DESPTR = %08lx \n",
                         ep->num, (unsigned long) readl(&ep->regs->desptr));
 
                 /* clear HE */
@@ -2384,7 +2384,7 @@ static irqreturn_t udc_data_in_isr(struct udc *dev, int ep_ix)
                         req = list_entry(ep->queue.next,
                                         struct udc_request, queue);
                         /*
-                         * length bytes transfered
+                         * length bytes transferred
                          * check dma done of last desc. in PPBDU mode
                          */
                         if (use_dma_ppb_du) {
@@ -2784,7 +2784,7 @@ static irqreturn_t udc_control_in_isr(struct udc *dev)
                                         /* write fifo */
                                         udc_txfifo_write(ep, &req->req);
 
-                                        /* lengh bytes transfered */
+                                        /* lengh bytes transferred */
                                         len = req->req.length - req->req.actual;
                                         if (len > ep->ep.maxpacket)
                                                 len = ep->ep.maxpacket;
diff --git a/drivers/usb/gadget/amd5536udc.h b/drivers/usb/gadget/amd5536udc.h
index 4bbabbbfc93..1d1c7543468 100644
--- a/drivers/usb/gadget/amd5536udc.h
+++ b/drivers/usb/gadget/amd5536udc.h
@@ -584,7 +584,7 @@ union udc_setup_data {
  * SET and GET bitfields in u32 values
  * via constants for mask/offset:
  * <bit_field_stub_name> is the text between
- * UDC_ and _MASK|_OFS of appropiate
+ * UDC_ and _MASK|_OFS of appropriate
  * constant
  *
  * set bitfield value in u32 u32Val
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index bb8ddf0469f..9b7cdb16f26 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -826,7 +826,7 @@ done:
         return status;
 }
 
-/* reinit == restore inital software state */
+/* reinit == restore initial software state */
 static void udc_reinit(struct at91_udc *udc)
 {
         u32 i;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index c2251c40a20..82314ed2250 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -42,7 +42,7 @@
 static struct usb_composite_driver *composite;
 static int (*composite_gadget_bind)(struct usb_composite_dev *cdev);
 
-/* Some systems will need runtime overrides for the  product identifers
+/* Some systems will need runtime overrides for the  product identifiers
  * published in the device descriptor, either numbers or strings or both.
  * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
@@ -205,14 +205,14 @@ int usb_function_activate(struct usb_function *function)
  * usb_interface_id() is called from usb_function.bind() callbacks to
  * allocate new interface IDs.  The function driver will then store that
  * ID in interface, association, CDC union, and other descriptors.  It
- * will also handle any control requests targetted at that interface,
+ * will also handle any control requests targeted at that interface,
  * particularly changing its altsetting via set_alt().  There may
  * also be class-specific or vendor-specific requests to handle.
  *
  * All interface identifier should be allocated using this routine, to
  * ensure that for example different functions don't wrongly assign
  * different meanings to the same identifier.  Note that since interface
- * identifers are configuration-specific, functions used in more than
+ * identifiers are configuration-specific, functions used in more than
  * one configuration (or more than once in a given configuration) need
  * multiple versions of the relevant descriptors.
  *
diff --git a/drivers/usb/gadget/f_audio.c b/drivers/usb/gadget/f_audio.c
index 00975ed903d..9abecfddb27 100644
--- a/drivers/usb/gadget/f_audio.c
+++ b/drivers/usb/gadget/f_audio.c
@@ -742,7 +742,7 @@ int __init control_selector_init(struct f_audio *audio)
 }
 
 /**
- * audio_bind_config - add USB audio fucntion to a configuration
+ * audio_bind_config - add USB audio function to a configuration
  * @c: the configuration to supcard the USB audio function
  * Context: single threaded during gadget setup
  *
diff --git a/drivers/usb/gadget/f_ncm.c b/drivers/usb/gadget/f_ncm.c
index 130eee678c8..86902a60bcd 100644
--- a/drivers/usb/gadget/f_ncm.c
+++ b/drivers/usb/gadget/f_ncm.c
@@ -111,7 +111,7 @@ static inline unsigned ncm_bitrate(struct usb_gadget *g)
 #define NTB_OUT_SIZE            16384
 
 /*
- * skbs of size less than that will not be alligned
+ * skbs of size less than that will not be aligned
  * to NCM's dwNtbInMaxSize to save bus bandwidth
  */
 
diff --git a/drivers/usb/gadget/fsl_qe_udc.h b/drivers/usb/gadget/fsl_qe_udc.h
index bea5b827beb..e35e24fd64b 100644
--- a/drivers/usb/gadget/fsl_qe_udc.h
+++ b/drivers/usb/gadget/fsl_qe_udc.h
@@ -208,14 +208,14 @@ struct qe_frame{
 /* Frame status field */
 /* Receive side */
 #define FRAME_OK               0x00000000 /* Frame tranmitted or received OK */
-#define FRAME_ERROR            0x80000000 /* Error occured on frame */
+#define FRAME_ERROR            0x80000000 /* Error occurred on frame */
 #define START_FRAME_LOST       0x40000000 /* START_FRAME_LOST */
 #define END_FRAME_LOST         0x20000000 /* END_FRAME_LOST */
 #define RX_ER_NONOCT           0x10000000 /* Rx Non Octet Aligned Packet */
 #define RX_ER_BITSTUFF         0x08000000 /* Frame Aborted --Received packet
                                              with bit stuff error */
 #define RX_ER_CRC              0x04000000 /* Received packet with CRC error */
-#define RX_ER_OVERUN           0x02000000 /* Over-run occured on reception */
+#define RX_ER_OVERUN           0x02000000 /* Over-run occurred on reception */
 #define RX_ER_PID              0x01000000 /* Wrong PID received */
 /* Tranmit side */
 #define TX_ER_NAK              0x00800000 /* Received NAK handshake */
@@ -379,7 +379,7 @@ struct qe_udc {
 #define T_LSP         0x01000000         /* Low-speed transaction */
 #define T_PID         0x00c00000         /* packet id */
 #define T_NAK         0x00100000         /* No ack. */
-#define T_STAL        0x00080000         /* Stall recieved */
+#define T_STAL        0x00080000         /* Stall received */
 #define T_TO          0x00040000         /* time out */
 #define T_UN          0x00020000         /* underrun */
 
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 912cb8e63fe..07499c1cdcc 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -464,7 +464,7 @@ static int fsl_ep_enable(struct usb_ep *_ep,
 
         max = le16_to_cpu(desc->wMaxPacketSize);
 
-        /* Disable automatic zlp generation.  Driver is reponsible to indicate
+        /* Disable automatic zlp generation.  Driver is responsible to indicate
          * explicitly through req->req.zero.  This is needed to enable multi-td
          * request. */
         zlt = 1;
@@ -648,7 +648,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
                         | EP_QUEUE_HEAD_STATUS_HALT));
         dQH->size_ioc_int_sts &= temp;
 
-        /* Ensure that updates to the QH will occure before priming. */
+        /* Ensure that updates to the QH will occur before priming. */
         wmb();
 
         /* Prime endpoint by writing 1 to ENDPTPRIME */
@@ -1459,7 +1459,7 @@ static int process_ep_req(struct fsl_udc *udc, int pipe,
                                 status = -EILSEQ;
                                 break;
                         } else
-                                ERR("Unknown error has occured (0x%x)!\n",
+                                ERR("Unknown error has occurred (0x%x)!\n",
                                         errors);
 
                 } else if (le32_to_cpu(curr_td->size_ioc_sts)
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index 20aeceed48c..e88cce5c2c0 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -15,7 +15,7 @@ struct usb_dr_device {
         u8 res1[256];
         u16 caplength;          /* Capability Register Length */
         u16 hciversion;         /* Host Controller Interface Version */
-        u32 hcsparams;          /* Host Controller Structual Parameters */
+        u32 hcsparams;          /* Host Controller Structural Parameters */
         u32 hccparams;          /* Host Controller Capability Parameters */
         u8 res2[20];
         u32 dciversion;         /* Device Controller Interface Version */
@@ -52,7 +52,7 @@ struct usb_dr_host {
         u8 res1[256];
         u16 caplength;          /* Capability Register Length */
         u16 hciversion;         /* Host Controller Interface Version */
-        u32 hcsparams;          /* Host Controller Structual Parameters */
+        u32 hcsparams;          /* Host Controller Structural Parameters */
         u32 hccparams;          /* Host Controller Capability Parameters */
         u8 res2[20];
         u32 dciversion;         /* Device Controller Interface Version */
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 0ab7e141d49..47b86b99d44 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -67,7 +67,7 @@ MODULE_PARM_DESC(index, "Index value for the USB MIDI Gadget adapter.");
 module_param(id, charp, 0444);
 MODULE_PARM_DESC(id, "ID string for the USB MIDI Gadget adapter.");
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c
index 1eca8b47ce3..9cee88a43a7 100644
--- a/drivers/usb/gadget/langwell_udc.c
+++ b/drivers/usb/gadget/langwell_udc.c
@@ -642,7 +642,7 @@ static int queue_dtd(struct langwell_ep *ep, struct langwell_request *req)
         dqh->dtd_status &= dtd_status;
         dev_vdbg(&dev->pdev->dev, "dqh->dtd_status = 0x%x\n", dqh->dtd_status);
 
-        /* ensure that updates to the dQH will occure before priming */
+        /* ensure that updates to the dQH will occur before priming */
         wmb();
 
         /* write 1 to endptprime register to PRIME endpoint */
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index d5468a7f38e..b62b2640deb 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -325,7 +325,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
 
                         /*
                          * Ensure that updates to the QH will
-                         * occure before priming.
+                         * occur before priming.
                          */
                         wmb();
 
@@ -338,7 +338,7 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
                         & EP_QUEUE_HEAD_NEXT_POINTER_MASK;;
                 dqh->size_ioc_int_sts = 0;
 
-                /* Ensure that updates to the QH will occure before priming. */
+                /* Ensure that updates to the QH will occur before priming. */
                 wmb();
 
                 /* Prime the Endpoint */
@@ -1845,7 +1845,7 @@ static irqreturn_t mv_udc_irq(int irq, void *dev)
                 return IRQ_NONE;
         }
 
-        /* Clear all the interrupts occured */
+        /* Clear all the interrupts occurred */
         writel(status, &udc->op_regs->usbsts);
 
         if (status & USBSTS_ERR)
diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c
index d09155b25d7..24696f7fa6a 100644
--- a/drivers/usb/gadget/net2280.c
+++ b/drivers/usb/gadget/net2280.c
@@ -117,7 +117,7 @@ module_param (fifo_mode, ushort, 0644);
 
 /* enable_suspend -- When enabled, the driver will respond to
  * USB suspend requests by powering down the NET2280.  Otherwise,
- * USB suspend requests will be ignored.  This is acceptible for
+ * USB suspend requests will be ignored.  This is acceptable for
  * self-powered devices
  */
 static int enable_suspend = 0;
diff --git a/drivers/usb/gadget/nokia.c b/drivers/usb/gadget/nokia.c
index b5364f9d7cd..55ca63ad350 100644
--- a/drivers/usb/gadget/nokia.c
+++ b/drivers/usb/gadget/nokia.c
@@ -203,7 +203,7 @@ static int __init nokia_bind(struct usb_composite_dev *cdev)
                 goto err_usb;
         }
 
-        /* finaly register the configuration */
+        /* finally register the configuration */
         status = usb_add_config(cdev, &nokia_config_500ma_driver,
                         nokia_bind_config);
         if (status < 0)
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 12ff6cffedc..c3f2bd42bd5 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -126,7 +126,7 @@ static struct printer_dev usb_printer_gadget;
 #define PRINTER_VENDOR_NUM      0x0525          /* NetChip */
 #define PRINTER_PRODUCT_NUM     0xa4a8          /* Linux-USB Printer Gadget */
 
-/* Some systems will want different product identifers published in the
+/* Some systems will want different product identifiers published in the
  * device descriptor, either numbers or strings or both.  These string
  * parameters are in UTF-8 (superset of ASCII's 7 bit characters).
  */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 2efd6732d13..78a39a41547 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -602,7 +602,7 @@ static void inc_ep_stats_reqs(struct pxa_ep *ep, int is_in)
 /**
  * inc_ep_stats_bytes - Update ep stats counts
  * @ep: physical endpoint
- * @count: bytes transfered on endpoint
+ * @count: bytes transferred on endpoint
  * @is_in: ep direction (USB_DIR_IN or 0)
  */
 static void inc_ep_stats_bytes(struct pxa_ep *ep, int count, int is_in)
@@ -877,7 +877,7 @@ static void nuke(struct pxa_ep *ep, int status)
  * If there is less space in request than bytes received in OUT endpoint,
  * bytes are left in the OUT endpoint.
  *
- * Returns how many bytes were actually transfered
+ * Returns how many bytes were actually transferred
  */
 static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -914,7 +914,7 @@ static int read_packet(struct pxa_ep *ep, struct pxa27x_request *req)
  * endpoint. If there are no bytes to transfer, doesn't write anything
  * to physical endpoint.
  *
- * Returns how many bytes were actually transfered.
+ * Returns how many bytes were actually transferred.
  */
 static int write_packet(struct pxa_ep *ep, struct pxa27x_request *req,
                         unsigned int max)
@@ -991,7 +991,7 @@ static int read_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * caller guarantees at least one packet buffer is ready (or a zlp).
  * Doesn't complete the request, that's the caller's job
  *
- * Returns 1 if request fully transfered, 0 if partial transfer
+ * Returns 1 if request fully transferred, 0 if partial transfer
  */
 static int write_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
 {
@@ -1094,7 +1094,7 @@ static int read_ep0_fifo(struct pxa_ep *ep, struct pxa27x_request *req)
  * Sends a request (or a part of the request) to the control endpoint (ep0 in).
  * If the request doesn't fit, the remaining part will be sent from irq.
  * The request is considered fully written only if either :
- *   - last write transfered all remaining bytes, but fifo was not fully filled
+ *   - last write transferred all remaining bytes, but fifo was not fully filled
  *   - last write was a 0 length write
  *
  * Returns 1 if request fully written, 0 if request only partially sent
@@ -1548,7 +1548,7 @@ static int pxa_udc_get_frame(struct usb_gadget *_gadget)
  * pxa_udc_wakeup - Force udc device out of suspend
  * @_gadget: usb gadget
  *
- * Returns 0 if successfull, error code otherwise
+ * Returns 0 if successful, error code otherwise
  */
 static int pxa_udc_wakeup(struct usb_gadget *_gadget)
 {
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index ef825c3baed..0912679de99 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -41,8 +41,8 @@
 /* EP0_MPS_LIMIT
  *
  * Unfortunately there seems to be a limit of the amount of data that can
- * be transfered by IN transactions on EP0. This is either 127 bytes or 3
- * packets (which practially means 1 packet and 63 bytes of data) when the
+ * be transferred by IN transactions on EP0. This is either 127 bytes or 3
+ * packets (which practically means 1 packet and 63 bytes of data) when the
  * MPS is set to 64.
  *
  * This means if we are wanting to move >127 bytes of data, we need to
@@ -783,7 +783,7 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg,
                        hsotg->regs + S3C_DIEPINT(index));
 
         /* Note, trying to clear the NAK here causes problems with transmit
-         * on the S3C6400 ending up with the TXFIFO becomming full. */
+         * on the S3C6400 ending up with the TXFIFO becoming full. */
 
         /* check ep is enabled */
         if (!(readl(hsotg->regs + epctrl_reg) & S3C_DxEPCTL_EPEna))
@@ -1176,10 +1176,10 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg,
                 writel(ctrl, hsotg->regs + reg);
 
                 dev_dbg(hsotg->dev,
-                        "writen DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
+                        "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n",
                         ctrl, reg, readl(hsotg->regs + reg));
 
-                /* don't belive we need to anything more to get the EP
+                /* don't believe we need to anything more to get the EP
                  * to reply with a STALL packet */
         }
 }
@@ -1416,7 +1416,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size)
  * transaction.
  *
  * Note, since we don't write any data to the TxFIFO, then it is
- * currently belived that we do not need to wait for any space in
+ * currently believed that we do not need to wait for any space in
  * the TxFIFO.
  */
 static void s3c_hsotg_send_zlp(struct s3c_hsotg *hsotg,
@@ -1540,7 +1540,7 @@ static u32 s3c_hsotg_read_frameno(struct s3c_hsotg *hsotg)
  * that requires processing, so find out what is in there and do the
  * appropriate read.
  *
- * The RXFIFO is a true FIFO, the packets comming out are still in packet
+ * The RXFIFO is a true FIFO, the packets coming out are still in packet
  * chunks, so if you have x packets received on an endpoint you'll get x
  * FIFO events delivered, each with a packet's worth of data in it.
  *
@@ -2188,7 +2188,7 @@ irq_retry:
 
         /* these next two seem to crop-up occasionally causing the core
          * to shutdown the USB transfer, so try clearing them and logging
-         * the occurence. */
+         * the occurrence. */
 
         if (gintsts & S3C_GINTSTS_GOUTNakEff) {
                 dev_info(hsotg->dev, "GOUTNakEff triggered\n");
@@ -2469,7 +2469,7 @@ static struct usb_ep_ops s3c_hsotg_ep_ops = {
         .queue          = s3c_hsotg_ep_queue,
         .dequeue        = s3c_hsotg_ep_dequeue,
         .set_halt       = s3c_hsotg_ep_sethalt,
-        /* note, don't belive we have any call for the fifo routines */
+        /* note, don't believe we have any call for the fifo routines */
 };
 
 /**
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 9483acdf2e9..e0e0787b724 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -402,7 +402,7 @@ config FHCI_DEBUG
         depends on USB_FHCI_HCD && DEBUG_FS
         help
           Say "y" to see some FHCI debug information and statistics
-          throught debugfs.
+          through debugfs.
 
 config USB_U132_HCD
         tristate "Elan U132 Adapter Host Controller"
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index f86d3fa2021..333ddc15691 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -644,7 +644,7 @@ static inline void ehci_writel(const struct ehci_hcd *ehci,
 /*
  * On certain ppc-44x SoC there is a HW issue, that could only worked around with
  * explicit suspend/operate of OHCI. This function hereby makes sense only on that arch.
- * Other common bits are dependant on has_amcc_usb23 quirk flag.
+ * Other common bits are dependent on has_amcc_usb23 quirk flag.
  */
 #ifdef CONFIG_44x
 static inline void set_ohci_hcfs(struct ehci_hcd *ehci, int operational)
diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c
index b84ff7e5189..19223c7449e 100644
--- a/drivers/usb/host/fhci-hcd.c
+++ b/drivers/usb/host/fhci-hcd.c
@@ -401,7 +401,7 @@ static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
                 /* 1 td fro setup,1 for ack */
                 size = 2;
         case PIPE_BULK:
-                /* one td for every 4096 bytes(can be upto 8k) */
+                /* one td for every 4096 bytes(can be up to 8k) */
                 size += urb->transfer_buffer_length / 4096;
                 /* ...add for any remaining bytes... */
                 if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c
index 38fe058fbe6..0ea577bfca2 100644
--- a/drivers/usb/host/fhci-tds.c
+++ b/drivers/usb/host/fhci-tds.c
@@ -40,7 +40,7 @@
 #define TD_RXER         0x0020 /* Rx error or not */
 
 #define TD_NAK          0x0010 /* No ack. */
-#define TD_STAL         0x0008 /* Stall recieved */
+#define TD_STAL         0x0008 /* Stall received */
 #define TD_TO           0x0004 /* time out */
 #define TD_UN           0x0002 /* underrun */
 #define TD_NO           0x0010 /* Rx Non Octet Aligned Packet */
@@ -274,7 +274,7 @@ void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep,
  * It is also preparing the TDs for new frames. If the Tx interrupts
  * are disabled, the application should call that routine to get
  * confirmation about the submitted frames. Otherwise, the routine is
- * called frome the interrupt service routine during the Tx interrupt.
+ * called from the interrupt service routine during the Tx interrupt.
  * In that case the application is informed by calling the application
  * specific 'fhci_transaction_confirm' routine
  */
@@ -337,7 +337,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
                                         pkt->status = USB_TD_RX_ER_NONOCT;
                                 else
                                         fhci_err(usb->fhci, "illegal error "
-                                                 "occured\n");
+                                                 "occurred\n");
                         } else if (td_status & TD_NAK)
                                 pkt->status = USB_TD_TX_ER_NAK;
                         else if (td_status & TD_TO)
@@ -347,7 +347,7 @@ static void fhci_td_transaction_confirm(struct fhci_usb *usb)
                         else if (td_status & TD_STAL)
                                 pkt->status = USB_TD_TX_ER_STALL;
                         else
-                                fhci_err(usb->fhci, "illegal error occured\n");
+                                fhci_err(usb->fhci, "illegal error occurred\n");
                 } else if ((extra_data & TD_TOK_IN) &&
                                 pkt->len > td_length - CRC_SIZE) {
                         pkt->status = USB_TD_RX_DATA_UNDERUN;
diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h
index 71c3caaea4c..dc6939a44a1 100644
--- a/drivers/usb/host/fhci.h
+++ b/drivers/usb/host/fhci.h
@@ -82,7 +82,7 @@
 #define USB_TD_RX_ER_NONOCT     0x40000000 /* Tx Non Octet Aligned Packet */
 #define USB_TD_RX_ER_BITSTUFF   0x20000000 /* Frame Aborted-Received pkt */
 #define USB_TD_RX_ER_CRC        0x10000000 /* CRC error */
-#define USB_TD_RX_ER_OVERUN     0x08000000 /* Over - run occured */
+#define USB_TD_RX_ER_OVERUN     0x08000000 /* Over - run occurred */
 #define USB_TD_RX_ER_PID        0x04000000 /* wrong PID received */
 #define USB_TD_RX_DATA_UNDERUN  0x02000000 /* shorter than expected */
 #define USB_TD_RX_DATA_OVERUN   0x01000000 /* longer than expected */
@@ -363,7 +363,7 @@ struct ed {
 struct td {
         void *data;              /* a pointer to the data buffer */
         unsigned int len;        /* length of the data to be submitted */
-        unsigned int actual_len; /* actual bytes transfered on this td */
+        unsigned int actual_len; /* actual bytes transferred on this td */
         enum fhci_ta_type type;  /* transaction type */
         u8 toggle;               /* toggle for next trans. within this TD */
         u16 iso_index;           /* ISO transaction index */
diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c
index 2562e92e317..af05718bdc7 100644
--- a/drivers/usb/host/imx21-hcd.c
+++ b/drivers/usb/host/imx21-hcd.c
@@ -1323,7 +1323,7 @@ static void process_etds(struct usb_hcd *hcd, struct imx21 *imx21, int sof)
  * (and hence no interrupt occurs).
  * This causes the transfer in question to hang.
  * The kludge below checks for this condition at each SOF and processes any
- * blocked ETDs (after an arbitary 10 frame wait)
+ * blocked ETDs (after an arbitrary 10 frame wait)
  *
  * With a single active transfer the usbtest test suite will run for days
  * without the kludge.
diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h
index 12db961acdf..9a2c400e609 100644
--- a/drivers/usb/host/isp116x.h
+++ b/drivers/usb/host/isp116x.h
@@ -13,7 +13,7 @@
 
 /* Full speed: max # of bytes to transfer for a single urb
    at a time must be < 1024 && must be multiple of 64.
-   832 allows transfering 4kiB within 5 frames. */
+   832 allows transferring 4kiB within 5 frames. */
 #define MAX_TRANSFER_SIZE_FULLSPEED     832
 
 /* Low speed: there is no reason to schedule in very big
diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c
index 662cd002adf..f97570a847c 100644
--- a/drivers/usb/host/isp1362-hcd.c
+++ b/drivers/usb/host/isp1362-hcd.c
@@ -546,7 +546,7 @@ static void postproc_ep(struct isp1362_hcd *isp1362_hcd, struct isp1362_ep *ep)
                         if (usb_pipecontrol(urb->pipe)) {
                                 ep->nextpid = USB_PID_ACK;
                                 /* save the data underrun error code for later and
-                                 * procede with the status stage
+                                 * proceed with the status stage
                                  */
                                 urb->actual_length += PTD_GET_COUNT(ptd);
                                 BUG_ON(urb->actual_length > urb->transfer_buffer_length);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index e7288639edb..d5572351486 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -162,7 +162,7 @@ static int ohci_urb_enqueue (
                 // case PIPE_INTERRUPT:
                 // case PIPE_BULK:
                 default:
-                        /* one TD for every 4096 Bytes (can be upto 8K) */
+                        /* one TD for every 4096 Bytes (can be up to 8K) */
                         size += urb->transfer_buffer_length / 4096;
                         /* ... and for any remaining bytes ... */
                         if ((urb->transfer_buffer_length % 4096) != 0)
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 44e4deb362e..4a771f6cc82 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -2879,7 +2879,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
         /* Ok, we have more job to do! :) */
 
         for (i = 0; i < num - 1; i++) {
-                /* Get free micro URB poll till a free urb is recieved */
+                /* Get free micro URB poll till a free urb is received */
 
                 do {
                         murb = (struct urb *) oxu_murb_alloc(oxu);
@@ -2911,7 +2911,7 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 
         /* Last urb requires special handling  */
 
-        /* Get free micro URB poll till a free urb is recieved */
+        /* Get free micro URB poll till a free urb is received */
         do {
                 murb = (struct urb *) oxu_murb_alloc(oxu);
                 if (!murb)
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index dc0ab8382f5..d6e17542861 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -739,7 +739,7 @@ static int get_urb_status_from_qtd(struct urb *urb, u32 status)
  * process_inactive_qtd - process an inactive (but not halted) qTD.
  *
  * Update the urb with the transfer bytes from the qTD, if the urb is
- * completely transfered or (in the case of an IN only) the LPF is
+ * completely transferred or (in the case of an IN only) the LPF is
  * set, then the transfer is complete and the urb should be returned
  * to the system.
  */
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 9a3645fd759..196e0181b2e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -741,7 +741,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
         int                     retval;
 
         /* Wait a bit if either of the roothubs need to settle from the
-         * transistion into bus suspend.
+         * transition into bus suspend.
          */
         if (time_before(jiffies, xhci->bus_state[0].next_statechange) ||
                         time_before(jiffies,
@@ -2072,7 +2072,7 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
                 return -EINVAL;
         }
         vdev = xhci->devs[udev->slot_id];
-        /* Mark each endpoint as being in transistion, so
+        /* Mark each endpoint as being in transition, so
          * xhci_urb_enqueue() will reject all URBs.
          */
         for (i = 0; i < num_eps; i++) {
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 711de253bc0..07e263063e3 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -873,7 +873,7 @@ struct xhci_transfer_event {
 #define COMP_CMD_ABORT  25
 /* Stopped - transfer was terminated by a stop endpoint command */
 #define COMP_STOP       26
-/* Same as COMP_EP_STOPPED, but the transfered length in the event is invalid */
+/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
 #define COMP_STOP_INVAL 27
 /* Control Abort Error - Debug Capability - control pipe aborted */
 #define COMP_DBG_ABORT  28
diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c
index c90c89dc000..a0037961e5b 100644
--- a/drivers/usb/image/microtek.c
+++ b/drivers/usb/image/microtek.c
@@ -69,7 +69,7 @@
  *      20000513 added IDs for all products supported by Windows driver (john)
  *      20000514 Rewrote mts_scsi_queuecommand to use URBs (john)
  *      20000514 Version 0.0.8j
- *      20000514 Fix reporting of non-existant devices to SCSI layer (john)
+ *      20000514 Fix reporting of non-existent devices to SCSI layer (john)
  *      20000514 Added MTS_DEBUG_INT (john)
  *      20000514 Changed "usb-microtek" to "microtek" for consistency (john)
  *      20000514 Stupid bug fixes (john)
@@ -557,14 +557,14 @@ mts_build_transfer_context(struct scsi_cmnd *srb, struct mts_desc* desc)
 
         if ( !memcmp( srb->cmnd, mts_read_image_sig, mts_read_image_sig_len )
 ) {             pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_image);
-                MTS_DEBUG( "transfering from desc->ep_image == %d\n",
+                MTS_DEBUG( "transferring from desc->ep_image == %d\n",
                            (int)desc->ep_image );
         } else if ( MTS_DIRECTION_IS_IN(srb->cmnd[0]) ) {
                         pipe = usb_rcvbulkpipe(desc->usb_dev,desc->ep_response);
-                        MTS_DEBUG( "transfering from desc->ep_response == %d\n",
+                        MTS_DEBUG( "transferring from desc->ep_response == %d\n",
                                    (int)desc->ep_response);
         } else {
-                MTS_DEBUG("transfering to desc->ep_out == %d\n",
+                MTS_DEBUG("transferring to desc->ep_out == %d\n",
                           (int)desc->ep_out);
                 pipe = usb_sndbulkpipe(desc->usb_dev,desc->ep_out);
         }
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index e573e470401..a2190b983f5 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -40,7 +40,7 @@
 #ifdef CONFIG_USB_DYNAMIC_MINORS
 #define IOWARRIOR_MINOR_BASE    0
 #else
-#define IOWARRIOR_MINOR_BASE    208     // SKELETON_MINOR_BASE 192 + 16, not offical yet
+#define IOWARRIOR_MINOR_BASE    208     // SKELETON_MINOR_BASE 192 + 16, not official yet
 #endif
 
 /* interrupt input queue size */
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index 8c6fdef61d1..e25700f44b6 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -1531,7 +1531,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
         i2c_set_clientdata(i2c, isp);
         isp->client = i2c;
 
-        /* verify the chip (shouldn't be necesary) */
+        /* verify the chip (shouldn't be necessary) */
         status = isp1301_get_u16(isp, ISP1301_VENDOR_ID);
         if (status != I2C_VENDOR_ID_PHILIPS) {
                 dev_dbg(&i2c->dev, "not philips id: %d\n", status);
diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c
index 7f9b8cd4514..e973ff19c55 100644
--- a/drivers/usb/otg/langwell_otg.c
+++ b/drivers/usb/otg/langwell_otg.c
@@ -580,7 +580,7 @@ static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers)
                 time = TB_BUS_SUSPEND;
                 break;
         default:
-                dev_dbg(lnw->dev, "unkown timer, cannot enable it\n");
+                dev_dbg(lnw->dev, "unknown timer, cannot enable it\n");
                 return;
         }
 
@@ -1381,7 +1381,7 @@ static void langwell_otg_work(struct work_struct *work)
                         } else if (!iotg->hsm.a_bus_req && iotg->otg.host &&
                                         iotg->otg.host->b_hnp_enable) {
                                 /* It is not safe enough to do a fast
-                                 * transistion from A_WAIT_BCON to
+                                 * transition from A_WAIT_BCON to
                                  * A_SUSPEND */
                                 msleep(10000);
                                 if (iotg->hsm.a_bus_req)
diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 0db6ace16f7..aba201cb872 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -16,7 +16,7 @@
  * When reading the process is almost equal except that the header starts with
  * 0x00 0x20.
  *
- * The device simply need some stuff to understand data comming from the usb
+ * The device simply need some stuff to understand data coming from the usb
  * buffer: The First and Second byte is used for a Header, the Third and Fourth
  * tells the  device the amount of information the package holds.
  * Packages are 60 bytes long Header Stuff.
@@ -30,7 +30,7 @@
  * one.
  *
  * The driver registers himself with the USB-serial core and the USB Core. I had
- * to implement a probe function agains USB-serial, because other way, the
+ * to implement a probe function against USB-serial, because other way, the
  * driver was attaching himself to both interfaces. I have tryed with different
  * configurations of usb_serial_driver with out exit, only the probe function
  * could handle this correctly.
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 4df3e0cecba..0f11afdda13 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -101,7 +101,7 @@ static const struct usb_device_id id_table[] = {
         { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
         { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
         { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
-        { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
+        { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */
         { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
         { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
         { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 987e9bf7bd0..d9906eb9d16 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -35,7 +35,7 @@
  *
  *  Lonnie Mendez <dignome@gmail.com>
  *  04-10-2004
- *      Driver modified to support dynamic line settings.  Various improvments
+ *      Driver modified to support dynamic line settings.  Various improvements
  *      and features.
  *
  *  Neil Whelchel
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 65967b36365..a973c7a29d6 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -17,7 +17,7 @@
  * See Documentation/usb/usb-serial.txt for more information on using this
  * driver
  *
- * See http://ftdi-usb-sio.sourceforge.net for upto date testing info
+ * See http://ftdi-usb-sio.sourceforge.net for up to date testing info
  *      and extra documentation
  *
  * Change entries from 2004 and earlier can be found in versions of this
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index f1aedfa7c42..abf095be575 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -1981,7 +1981,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
         if (code == IOSP_STATUS_OPEN_RSP) {
                 edge_port->txCredits = GET_TX_BUFFER_SIZE(byte3);
                 edge_port->maxTxCredits = edge_port->txCredits;
-                dbg("%s - Port %u Open Response Inital MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
+                dbg("%s - Port %u Open Response Initial MSR = %02x TxBufferSize = %d", __func__, edge_serial->rxPort, byte2, edge_port->txCredits);
                 handle_new_msr(edge_port, byte2);
 
                 /* send the current line settings to the port so we are
diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h
index dced7ec6547..ad9c1d47a61 100644
--- a/drivers/usb/serial/io_edgeport.h
+++ b/drivers/usb/serial/io_edgeport.h
@@ -68,7 +68,7 @@ struct comMapper {
 #define PROC_SET_COM_ENTRY              2
 
 
-/* The following sturcture is passed to the write */
+/* The following structure is passed to the write */
 struct procWrite {
         int     Command;
         union {
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index d8434910fa7..0aac00afb5c 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -433,7 +433,7 @@ static int write_i2c_mem(struct edgeport_serial *serial,
 
         /* We can only send a maximum of 1 aligned byte page at a time */
 
-        /* calulate the number of bytes left in the first page */
+        /* calculate the number of bytes left in the first page */
         write_length = EPROM_PAGE_SIZE -
                                 (start_address & (EPROM_PAGE_SIZE - 1));
 
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 201f6096844..a6f63cc8c13 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -116,7 +116,7 @@ static void opticon_read_bulk_callback(struct urb *urb)
                 } else {
                         if ((data[0] == 0x00) && (data[1] == 0x01)) {
                                 spin_lock_irqsave(&priv->lock, flags);
-                                /* CTS status infomation package */
+                                /* CTS status information package */
                                 if (data[2] == 0x00)
                                         priv->cts = false;
                                 else
diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c
index 08e03745e25..0e5aafda453 100644
--- a/drivers/usb/storage/ene_ub6250.c
+++ b/drivers/usb/storage/ene_ub6250.c
@@ -562,7 +562,7 @@ static int ene_sd_init(struct us_data *us)
 
         result = ene_send_scsi_cmd(us, FDIR_READ, NULL, 0);
         if (result != USB_STOR_XFER_GOOD) {
-                US_DEBUGP("Exection SD Init Code Fail !!\n");
+                US_DEBUGP("Execution SD Init Code Fail !!\n");
                 return USB_STOR_TRANSPORT_ERROR;
         }
 
@@ -581,7 +581,7 @@ static int ene_sd_init(struct us_data *us)
 
         result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
         if (result != USB_STOR_XFER_GOOD) {
-                US_DEBUGP("Exection SD Init Code Fail !!\n");
+                US_DEBUGP("Execution SD Init Code Fail !!\n");
                 return USB_STOR_TRANSPORT_ERROR;
         }
 
diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c
index 6b9982cd542..09e52ba47dd 100644
--- a/drivers/usb/storage/isd200.c
+++ b/drivers/usb/storage/isd200.c
@@ -1510,7 +1510,7 @@ static int isd200_Initialization(struct us_data *us)
  * Protocol and Transport for the ISD200 ASIC
  *
  * This protocol and transport are for ATA devices connected to an ISD200
- * ASIC.  An ATAPI device that is conected as a slave device will be
+ * ASIC.  An ATAPI device that is connected as a slave device will be
  * detected in the driver initialization function and the protocol will
  * be changed to an ATAPI protocol (Transparent SCSI).
  *
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 689ee1fb702..13b8bcdf3db 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -123,7 +123,7 @@ static int slave_configure(struct scsi_device *sdev)
 {
         struct us_data *us = host_to_us(sdev->host);
 
-        /* Many devices have trouble transfering more than 32KB at a time,
+        /* Many devices have trouble transferring more than 32KB at a time,
          * while others have trouble with more than 64K. At this time we
          * are limiting both to 32K (64 sectores).
          */
diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c
index bd3f415893d..0b00091d2ae 100644
--- a/drivers/usb/storage/shuttle_usbat.c
+++ b/drivers/usb/storage/shuttle_usbat.c
@@ -340,7 +340,7 @@ static int usbat_check_status(struct us_data *us)
 }
 
 /*
- * Stores critical information in internal registers in prepartion for the execution
+ * Stores critical information in internal registers in preparation for the execution
  * of a conditional usbat_read_blocks or usbat_write_blocks call.
  */
 static int usbat_set_shuttle_features(struct us_data *us,
diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c
index 827c87f10cc..7e4bf95f8f7 100644
--- a/drivers/usb/wusbcore/crypto.c
+++ b/drivers/usb/wusbcore/crypto.c
@@ -180,7 +180,7 @@ static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2,
  *     using the 14 bytes of @a to fill up
  *     b1.{mac_header,e0,security_reserved,padding}.
  *
- * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of
+ * NOTE: The definition of l(a) in WUSB1.0[6.5] vs the definition of
  *       l(m) is orthogonal, they bear no relationship, so it is not
  *       in conflict with the parameter's relation that
  *       WUSB1.0[6.4.2]) defines.
@@ -272,7 +272,7 @@ static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc,
 
         /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5]
          * The procedure is to AES crypt the A0 block and XOR the MIC
-         * Tag agains it; we only do the first 8 bytes and place it
+         * Tag against it; we only do the first 8 bytes and place it
          * directly in the destination buffer.
          *
          * POS Crypto API: size is assumed to be AES's block size.
diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c
index 4ed97360c04..6f4fafdc240 100644
--- a/drivers/usb/wusbcore/reservation.c
+++ b/drivers/usb/wusbcore/reservation.c
@@ -71,7 +71,7 @@ static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv)
 
 /**
  * wusbhc_rsv_establish - establish a reservation for the cluster
- * @wusbhc: the WUSB HC requesting a bandwith reservation
+ * @wusbhc: the WUSB HC requesting a bandwidth reservation
  */
 int wusbhc_rsv_establish(struct wusbhc *wusbhc)
 {
diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c
index c175b7300c7..39de3900ad2 100644
--- a/drivers/usb/wusbcore/rh.c
+++ b/drivers/usb/wusbcore/rh.c
@@ -133,7 +133,7 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx)
  *           big of a problem [and we can't make it an spinlock
  *           because other parts need to take it and sleep] .
  *
- *           @usb_hcd is refcounted, so it won't dissapear under us
+ *           @usb_hcd is refcounted, so it won't disappear under us
  *           and before killing a host, the polling of the root hub
  *           would be stopped anyway.
  */
diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c
index 8cb9d80207f..ca80171f42c 100644
--- a/drivers/usb/wusbcore/wa-rpipe.c
+++ b/drivers/usb/wusbcore/wa-rpipe.c
@@ -24,7 +24,7 @@
  *
  * RPIPE
  *
- *   Targetted at different downstream endpoints
+ *   Targeted at different downstream endpoints
  *
  *   Descriptor: use to config the remote pipe.
  *
diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c
index 84b744c428a..6ccd93a9b90 100644
--- a/drivers/usb/wusbcore/wa-xfer.c
+++ b/drivers/usb/wusbcore/wa-xfer.c
@@ -61,7 +61,7 @@
  *
  *     Two methods it could be done:
  *
- *     (a) set up a timer everytime an rpipe's use count drops to 1
+ *     (a) set up a timer every time an rpipe's use count drops to 1
  *         (which means unused) or when a transfer ends. Reset the
  *         timer when a xfer is queued. If the timer expires, release
  *         the rpipe [see rpipe_ep_disable()].
@@ -140,7 +140,7 @@ struct wa_xfer {
 
         struct wahc *wa;                /* Wire adapter we are plugged to */
         struct usb_host_endpoint *ep;
-        struct urb *urb;                /* URB we are transfering for */
+        struct urb *urb;                /* URB we are transferring for */
         struct wa_seg **seg;            /* transfer segments */
         u8 segs, segs_submitted, segs_done;
         unsigned is_inbound:1;
@@ -161,7 +161,7 @@ static inline void wa_xfer_init(struct wa_xfer *xfer)
 }
 
 /*
- * Destory a transfer structure
+ * Destroy a transfer structure
  *
  * Note that the xfer->seg[index] thingies follow the URB life cycle,
  * so we need to put them, not free them.
@@ -494,7 +494,7 @@ static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer,
  * function does almost the same thing and they work closely
  * together.
  *
- * If the seg request has failed but this DTO phase has suceeded,
+ * If the seg request has failed but this DTO phase has succeeded,
  * wa_seg_cb() has already failed the segment and moved the
  * status to WA_SEG_ERROR, so this will go through 'case 0' and
  * effectively do nothing.
diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h
index 6bd426b7ec0..3a2d09162e7 100644
--- a/drivers/usb/wusbcore/wusbhc.h
+++ b/drivers/usb/wusbcore/wusbhc.h
@@ -231,7 +231,7 @@ struct wusb_port {
  *
  *    Most of the times when you need to use it, it will be non-NULL,
  *    so there is no real need to check for it (wusb_dev will
- *    dissapear before usb_dev).
+ *    disappear before usb_dev).
  *
  *  - The following fields need to be filled out before calling
  *    wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}.
diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c
index 08bd6dbfd4a..3e5454aba5d 100644
--- a/drivers/uwb/driver.c
+++ b/drivers/uwb/driver.c
@@ -61,7 +61,7 @@
 
 
 /**
- * If a beacon dissapears for longer than this, then we consider the
+ * If a beacon disappears for longer than this, then we consider the
  * device who was represented by that beacon to be gone.
  *
  * ECMA-368[17.2.3, last para] establishes that a device must not
diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c
index a8d83e25e3b..3fbcf789dfa 100644
--- a/drivers/uwb/drp.c
+++ b/drivers/uwb/drp.c
@@ -27,7 +27,7 @@
 
 /* DRP Conflict Actions ([ECMA-368 2nd Edition] 17.4.6) */
 enum uwb_drp_conflict_action {
-        /* Reservation is mantained, no action needed */
+        /* Reservation is maintained, no action needed */
         UWB_DRP_CONFLICT_MANTAIN = 0,
         
         /* the device shall not transmit frames in conflicting MASs in
@@ -741,12 +741,12 @@ void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt,
  * DRP notifications can occur for three different reasons:
  *
  * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as
- *   the target or source have been recieved.
+ *   the target or source have been received.
  *
  *   These DRP IEs could be new or for an existing reservation.
  *
  *   If the DRP IE for an existing reservation ceases to be to
- *   recieved for at least mMaxLostBeacons, the reservation should be
+ *   received for at least mMaxLostBeacons, the reservation should be
  *   considered to be terminated.  Note that the TERMINATE reason (see
  *   below) may not always be signalled (e.g., the remote device has
  *   two or more reservations established with the RC).
diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c
index b0091c771b9..b4395f41a00 100644
--- a/drivers/uwb/lc-rc.c
+++ b/drivers/uwb/lc-rc.c
@@ -168,7 +168,7 @@ int uwb_rc_mac_addr_setup(struct uwb_rc *rc)
         }
 
         if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) {
-                addr.data[0] = 0x02; /* locally adminstered and unicast */
+                addr.data[0] = 0x02; /* locally administered and unicast */
                 get_random_bytes(&addr.data[1], sizeof(addr.data)-1);
 
                 result = uwb_rc_mac_addr_set(rc, &addr);
diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c
index 27849292b55..3de630b0f69 100644
--- a/drivers/uwb/reset.c
+++ b/drivers/uwb/reset.c
@@ -52,7 +52,7 @@ const char *__strerror[] = {
         "cancelled",
         "invalid state",
         "invalid size",
-        "ack not recieved",
+        "ack not received",
         "no more asie notification",
 };
 
diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c
index ccd2184e05d..b2948ec5787 100644
--- a/drivers/uwb/umc-dev.c
+++ b/drivers/uwb/umc-dev.c
@@ -78,7 +78,7 @@ EXPORT_SYMBOL_GPL(umc_device_register);
  * First we unregister the device, make sure the driver can do it's
  * resource release thing and then we try to release any left over
  * resources. We take a ref to the device, to make sure it doesn't
- * dissapear under our feet.
+ * disappear under our feet.
  */
 void umc_device_unregister(struct umc_dev *umc)
 {
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index ccecf997458..4484c721f0f 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -637,7 +637,7 @@ static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitf
  *      magnitude which needs to be scaled in this function for the hardware.
  *      Things to take into consideration are how many color registers, if
  *      any, are supported with the current color visual. With truecolor mode
- *      no color palettes are supported. Here a psuedo palette is created
+ *      no color palettes are supported. Here a pseudo palette is created
  *      which we store the value in pseudo_palette in struct fb_info. For
  *      pseudocolor mode we have a limited color palette. To deal with this
  *      we can program what color is displayed for a particular pixel value.
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index d437b3daf1f..ebb893c49e9 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3124,12 +3124,12 @@ static int __devinit atyfb_setup_sparc(struct pci_dev *pdev,
                 M = pll_regs[2];
 
                 /*
-                 * PLL Feedback Divider N (Dependant on CLOCK_CNTL):
+                 * PLL Feedback Divider N (Dependent on CLOCK_CNTL):
                  */
                 N = pll_regs[7 + (clock_cntl & 3)];
 
                 /*
-                 * PLL Post Divider P (Dependant on CLOCK_CNTL):
+                 * PLL Post Divider P (Dependent on CLOCK_CNTL):
                  */
                 P = 1 << (pll_regs[6] >> ((clock_cntl & 3) << 1));
 
diff --git a/drivers/video/aty/mach64_cursor.c b/drivers/video/aty/mach64_cursor.c
index 2ba8b3c421a..46f72ed5351 100644
--- a/drivers/video/aty/mach64_cursor.c
+++ b/drivers/video/aty/mach64_cursor.c
@@ -51,7 +51,7 @@
  * to a larger number and saturate CUR_HORZ_POSN to zero.
  *
  * if Y becomes negative, CUR_VERT_OFFSET must be adjusted to a larger number,
- * CUR_OFFSET must be adjusted to a point to the appropraite line in the cursor
+ * CUR_OFFSET must be adjusted to a point to the appropriate line in the cursor
  * definitation and CUR_VERT_POSN must be saturated to zero.
  */
 
diff --git a/drivers/video/au1200fb.c b/drivers/video/au1200fb.c
index 4ea187d9376..5dff32ac804 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/au1200fb.c
@@ -1572,7 +1572,7 @@ static int au1200fb_init_fbinfo(struct au1200fb_device *fbdev)
         /* Copy monitor specs from panel data */
         /* fixme: we're setting up LCD controller windows, so these dont give a
         damn as to what the monitor specs are (the panel itself does, but that
-        isnt done here...so maybe need a generic catchall monitor setting??? */
+        isn't done here...so maybe need a generic catchall monitor setting??? */
         memcpy(&fbi->monspecs, &panel->monspecs, sizeof(struct fb_monspecs));
 
         /* We first try the user mode passed in argument. If that failed,
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index af6098396fe..c6533bad26f 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c
@@ -109,7 +109,7 @@ static unsigned long corgibl_flags;
 #define CORGIBL_BATTLOW       0x02
 
 /*
- * This is only a psuedo I2C interface. We can't use the standard kernel
+ * This is only a pseudo I2C interface. We can't use the standard kernel
  * routines as the interface is write only. We just assume the data is acked...
  */
 static void lcdtg_ssp_i2c_send(struct corgi_lcd *lcd, uint8_t data)
diff --git a/drivers/video/backlight/locomolcd.c b/drivers/video/backlight/locomolcd.c
index bbca3127071..be20b5cbe26 100644
--- a/drivers/video/backlight/locomolcd.c
+++ b/drivers/video/backlight/locomolcd.c
@@ -6,7 +6,7 @@
  * GPL v2
  *
  * This driver assumes single CPU. That's okay, because collie is
- * slightly old hardware, and noone is going to retrofit second CPU to
+ * slightly old hardware, and no one is going to retrofit second CPU to
  * old PDA.
  */
 
diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/bfin_adv7393fb.h
index 8c7f9e4fc6e..cd591b5152a 100644
--- a/drivers/video/bfin_adv7393fb.h
+++ b/drivers/video/bfin_adv7393fb.h
@@ -87,12 +87,12 @@ static const u8 init_NTSC_TESTPATTERN[] = {
 
 static const u8 init_NTSC[] = {
         0x00, 0x1E,     /* Power up all DACs and PLL */
-        0xC3, 0x26,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xC5, 0x12,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xC2, 0x4A,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xC6, 0x5E,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xBD, 0x19,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xBF, 0x42,     /* Program RGB->YCrCb Color Space convertion matrix */
+        0xC3, 0x26,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xC5, 0x12,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xC2, 0x4A,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xC6, 0x5E,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xBD, 0x19,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xBF, 0x42,     /* Program RGB->YCrCb Color Space conversion matrix */
         0x8C, 0x1F,     /* NTSC Subcarrier Frequency */
         0x8D, 0x7C,     /* NTSC Subcarrier Frequency */
         0x8E, 0xF0,     /* NTSC Subcarrier Frequency */
@@ -109,12 +109,12 @@ static const u8 init_NTSC[] = {
 
 static const u8 init_PAL[] = {
         0x00, 0x1E,     /* Power up all DACs and PLL */
-        0xC3, 0x26,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xC5, 0x12,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xC2, 0x4A,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xC6, 0x5E,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xBD, 0x19,     /* Program RGB->YCrCb Color Space convertion matrix */
-        0xBF, 0x42,     /* Program RGB->YCrCb Color Space convertion matrix */
+        0xC3, 0x26,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xC5, 0x12,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xC2, 0x4A,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xC6, 0x5E,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xBD, 0x19,     /* Program RGB->YCrCb Color Space conversion matrix */
+        0xBF, 0x42,     /* Program RGB->YCrCb Color Space conversion matrix */
         0x8C, 0xCB,     /* PAL Subcarrier Frequency */
         0x8D, 0x8A,     /* PAL Subcarrier Frequency */
         0x8E, 0x09,     /* PAL Subcarrier Frequency */
diff --git a/drivers/video/console/font_mini_4x6.c b/drivers/video/console/font_mini_4x6.c
index a19a7f33133..fa6e698e63c 100644
--- a/drivers/video/console/font_mini_4x6.c
+++ b/drivers/video/console/font_mini_4x6.c
@@ -1,5 +1,5 @@
 
-/* Hand composed "Miniscule" 4x6 font, with binary data generated using
+/* Hand composed "Minuscule" 4x6 font, with binary data generated using
  * Perl stub.
  *
  * Use 'perl -x mini_4x6.c < mini_4x6.c > new_version.c' to regenerate
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 8d61ef96eed..8b7d47386f3 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -763,7 +763,7 @@ static int fb_wait_for_vsync(struct fb_info *info)
 
         /*
          * Set flag to 0 and wait for isr to set to 1. It would seem there is a
-         * race condition here where the ISR could have occured just before or
+         * race condition here where the ISR could have occurred just before or
          * just after this set. But since we are just coarsely waiting for
          * a frame to complete then that's OK. i.e. if the frame completed
          * just before this code executed then we have to wait another full
diff --git a/drivers/video/display/display-sysfs.c b/drivers/video/display/display-sysfs.c
index f6a09ab0dac..0c647d7af0e 100644
--- a/drivers/video/display/display-sysfs.c
+++ b/drivers/video/display/display-sysfs.c
@@ -182,7 +182,7 @@ void display_device_unregister(struct display_device *ddev)
         mutex_lock(&ddev->lock);
         device_unregister(ddev->dev);
         mutex_unlock(&ddev->lock);
-        // Mark device index as avaliable
+        // Mark device index as available
         mutex_lock(&allocated_dsp_lock);
         idr_remove(&allocated_dsp, ddev->idx);
         mutex_unlock(&allocated_dsp_lock);
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/ep93xx-fb.c
index b358d045f13..cbdb1bd77c2 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/ep93xx-fb.c
@@ -456,7 +456,7 @@ static int __init ep93xxfb_alloc_videomem(struct fb_info *info)
          * There is a bug in the ep93xx framebuffer which causes problems
          * if bit 27 of the physical address is set.
          * See: http://marc.info/?l=linux-arm-kernel&m=110061245502000&w=2
-         * There does not seem to be any offical errata for this, but I
+         * There does not seem to be any official errata for this, but I
          * have confirmed the problem exists on my hardware (ep9315) at
          * least.
          */
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c
index f4a32779168..04251ce8918 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbsysfs.c
@@ -33,7 +33,7 @@
  * for driver private data (info->par). info->par (if any) will be
  * aligned to sizeof(long).
  *
- * Returns the new structure, or NULL if an error occured.
+ * Returns the new structure, or NULL if an error occurred.
  *
  */
 struct fb_info *framebuffer_alloc(size_t size, struct device *dev)
diff --git a/drivers/video/fm2fb.c b/drivers/video/fm2fb.c
index 1b0feb8e724..d0533b7aad7 100644
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fm2fb.c
@@ -45,7 +45,7 @@
  *      buffer needs an amount of memory of 1.769.472 bytes which
  *      is near to 2 MByte (the allocated address space of Zorro2).
  *      The memory is channel interleaved. That means every channel
- *      owns four VRAMs. Unfortunatly most FrameMasters II are
+ *      owns four VRAMs. Unfortunately most FrameMasters II are
  *      not assembled with memory for the alpha channel. In this
  *      case it could be possible to add the frame buffer into the
  *      normal memory pool.
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index 9048f87fa8c..bedf5be27f0 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -882,7 +882,7 @@ static inline __u32 CNVT_TOHW(__u32 val, __u32 width)
  * which needs to be scaled in this function for the hardware. Things to take
  * into consideration are how many color registers, if any, are supported with
  * the current color visual. With truecolor mode no color palettes are
- * supported. Here a psuedo palette is created which we store the value in
+ * supported. Here a pseudo palette is created which we store the value in
  * pseudo_palette in struct fb_info. For pseudocolor mode we have a limited
  * color palette.
  */
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index 933899dca33..7e7b7a9ba27 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -721,7 +721,7 @@ static int gbefb_set_par(struct fb_info *info)
 
            Tiles have the advantage that they can be allocated individually in
            memory. However, this mapping is not linear at all, which is not
-           really convienient. In order to support linear addressing, the GBE
+           really convenient. In order to support linear addressing, the GBE
            DMA hardware is fooled into thinking the screen is only one tile
            large and but has a greater height, so that the DMA transfer covers
            the same region.
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/geode/lxfb.h
index be8ccb47ebe..cfcd8090f31 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/geode/lxfb.h
@@ -117,7 +117,7 @@ enum gp_registers {
 };
 
 #define GP_BLT_STATUS_CE                (1 << 4)        /* cmd buf empty */
-#define GP_BLT_STATUS_PB                (1 << 0)        /* primative busy */
+#define GP_BLT_STATUS_PB                (1 << 0)        /* primitive busy */
 
 
 /* Display Controller registers (table 6-47 from the data book) */
diff --git a/drivers/video/i810/i810_accel.c b/drivers/video/i810/i810_accel.c
index f5bedee4310..7672d2ea9b3 100644
--- a/drivers/video/i810/i810_accel.c
+++ b/drivers/video/i810/i810_accel.c
@@ -112,7 +112,7 @@ static inline int wait_for_engine_idle(struct fb_info *info)
  * @par: pointer to i810fb_par structure
  *
  * DESCRIPTION:
- * Checks/waits for sufficent space in ringbuffer of size
+ * Checks/waits for sufficient space in ringbuffer of size
  * space.  Returns the tail of the buffer
  */ 
 static inline u32 begin_iring(struct fb_info *info, u32 space)
diff --git a/drivers/video/kyro/STG4000OverlayDevice.c b/drivers/video/kyro/STG4000OverlayDevice.c
index a8c9713413e..0aeeaa10708 100644
--- a/drivers/video/kyro/STG4000OverlayDevice.c
+++ b/drivers/video/kyro/STG4000OverlayDevice.c
@@ -417,7 +417,7 @@ int SetOverlayViewPort(volatile STG4000REG __iomem *pSTGReg,
         /***************** Horizontal decimation/scaling ***************************/
 
         /*
-         * Now we handle the horizontal case, this is a simplified verison of
+         * Now we handle the horizontal case, this is a simplified version of
          * the vertical case in that we decimate by factors of 2.  as we are
          * working in words we should always be able to decimate by these
          * factors.  as we always have to have a buffer which is aligned to a
diff --git a/drivers/video/kyro/STG4000Reg.h b/drivers/video/kyro/STG4000Reg.h
index 244549e6136..5d626988258 100644
--- a/drivers/video/kyro/STG4000Reg.h
+++ b/drivers/video/kyro/STG4000Reg.h
@@ -16,7 +16,7 @@
 
 /*
  * Macros that access memory mapped card registers in PCI space
- * Add an appropraite section for your OS or processor architecture.
+ * Add an appropriate section for your OS or processor architecture.
  */
 #if defined(__KERNEL__)
 #include <asm/page.h>
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/matrox/matroxfb_DAC1064.h
index c6ed7801efe..1e6e45b57b7 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/matrox/matroxfb_DAC1064.h
@@ -46,7 +46,7 @@ void DAC1064_global_restore(struct matrox_fb_info *minfo);
 #define      M1064_XDVICLKCTRL_DVILOOPCTL       0x30
         /* CRTC2 pixel clock allowed to(0)/blocked from(1) driving CRTC2 */
 #define      M1064_XDVICLKCTRL_C2DVICLKEN       0x40
-        /* P1PLL loop filter bandwith selection */
+        /* P1PLL loop filter bandwidth selection */
 #define      M1064_XDVICLKCTRL_P1LOOPBWDTCTL    0x80
 #define M1064_XCURCOL0RED       0x08
 #define M1064_XCURCOL0GREEN     0x09
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/matrox/matroxfb_Ti3026.c
index 835aaaae6b9..9a44cec394b 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/matrox/matroxfb_Ti3026.c
@@ -387,7 +387,7 @@ static int Ti3026_init(struct matrox_fb_info *minfo, struct my_timming *m)
                         hw->DACreg[POS3026_XMISCCTRL] = TVP3026_XMISCCTRL_DAC_PUP | TVP3026_XMISCCTRL_DAC_8BIT | TVP3026_XMISCCTRL_PSEL_DIS | TVP3026_XMISCCTRL_PSEL_LOW;
                         break;
                 case 16:
-                        /* XLATCHCTRL should be _4_1 / _2_1... Why is not? (_2_1 is used everytime) */
+                        /* XLATCHCTRL should be _4_1 / _2_1... Why is not? (_2_1 is used every time) */
                         hw->DACreg[POS3026_XTRUECOLORCTRL] = (minfo->fbcon.var.green.length == 5) ? (TVP3026_XTRUECOLORCTRL_DIRECTCOLOR | TVP3026_XTRUECOLORCTRL_ORGB_1555) : (TVP3026_XTRUECOLORCTRL_DIRECTCOLOR | TVP3026_XTRUECOLORCTRL_RGB_565);
                         hw->DACreg[POS3026_XMUXCTRL] = muxctrl | TVP3026_XMUXCTRL_PIXEL_16BIT;
                         hw->DACreg[POS3026_XCLKCTRL] = TVP3026_XCLKCTRL_SRC_PLL | TVP3026_XCLKCTRL_DIV2;
@@ -399,7 +399,7 @@ static int Ti3026_init(struct matrox_fb_info *minfo, struct my_timming *m)
                         hw->DACreg[POS3026_XCLKCTRL] = TVP3026_XCLKCTRL_SRC_PLL | TVP3026_XCLKCTRL_DIV4;
                         break;
                 case 32:
-                        /* XLATCHCTRL should be _2_1 / _1_1... Why is not? (_2_1 is used everytime) */
+                        /* XLATCHCTRL should be _2_1 / _1_1... Why is not? (_2_1 is used every time) */
                         hw->DACreg[POS3026_XMUXCTRL] = muxctrl | TVP3026_XMUXCTRL_PIXEL_32BIT;
                         break;
                 default:
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 5ce6fa6e59f..44bf8d4a216 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -621,7 +621,7 @@ static int matroxfb_decode_var(const struct matrox_fb_info *minfo,
                 var->yoffset = var->yres_virtual - var->yres;
 
         if (bpp == 16 && var->green.length == 5) {
-                bpp--; /* an artifical value - 15 */
+                bpp--; /* an artificial value - 15 */
         }
 
         for (rgbt = table; rgbt->bpp < bpp; rgbt++);
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index f96a471cb1a..11ed57bb704 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -12,7 +12,7 @@
 #undef MATROXFB_DEBUG
 
 /* heavy debugging: */
-/* -- logs putc[s], so everytime a char is displayed, it's logged */
+/* -- logs putc[s], so every time a char is displayed, it's logged */
 #undef MATROXFB_DEBUG_HEAVY
 
 /* This one _could_ cause infinite loops */
diff --git a/drivers/video/nuc900fb.h b/drivers/video/nuc900fb.h
index 6c23aa3d3b8..bc7c9300f27 100644
--- a/drivers/video/nuc900fb.h
+++ b/drivers/video/nuc900fb.h
@@ -8,7 +8,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
- *   Auther:
+ *   Author:
  *        Wang Qiang(rurality.linux@gmail.com)  2009/12/16
  */
 
diff --git a/drivers/video/omap/Kconfig b/drivers/video/omap/Kconfig
index 15e7f1912af..196fa2e7f43 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/omap/Kconfig
@@ -64,7 +64,7 @@ config FB_OMAP_MANUAL_UPDATE
         depends on FB_OMAP && FB_OMAP_LCDC_EXTERNAL
         help
           Say Y here, if your user-space applications are capable of
-          notifying the frame buffer driver when a change has occured in
+          notifying the frame buffer driver when a change has occurred in
           the frame buffer content and thus a reload of the image data to
           the external frame buffer is required. If unsure, say N.
 
diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c
index 0d44f070ef3..a981def8099 100644
--- a/drivers/video/omap2/dss/hdmi.c
+++ b/drivers/video/omap2/dss/hdmi.c
@@ -587,7 +587,7 @@ static void get_edid_timing_data(u8 *edid)
         struct hdmi_cm cm;
         struct omap_video_timings edid_timings;
 
-        /* seach block 0, there are 4 DTDs arranged in priority order */
+        /* search block 0, there are 4 DTDs arranged in priority order */
         for (count = 0; count < EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR; count++) {
                 current_descriptor_addrs =
                         EDID_DESCRIPTOR_BLOCK0_ADDRESS +
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/pxa3xx-gcu.c
index cf4beb9dc9b..0283c702109 100644
--- a/drivers/video/pxa3xx-gcu.c
+++ b/drivers/video/pxa3xx-gcu.c
@@ -25,7 +25,7 @@
 
 /*
  * WARNING: This controller is attached to System Bus 2 of the PXA which
- * needs its arbiter to be enabled explictly (CKENB & 1<<9).
+ * needs its arbiter to be enabled explicitly (CKENB & 1<<9).
  * There is currently no way to do this from Linux, so you need to teach
  * your bootloader for now.
  */
diff --git a/drivers/video/savage/savagefb.h b/drivers/video/savage/savagefb.h
index e4c3f214eb8..4e9490c19d7 100644
--- a/drivers/video/savage/savagefb.h
+++ b/drivers/video/savage/savagefb.h
@@ -153,7 +153,7 @@ struct savage_reg {
         unsigned char CRTC[25];       /* Crtc Controller */
         unsigned char Sequencer[5];   /* Video Sequencer */
         unsigned char Graphics[9];    /* Video Graphics */
-        unsigned char Attribute[21];  /* Video Atribute */
+        unsigned char Attribute[21];  /* Video Attribute */
 
         unsigned int mode, refresh;
         unsigned char SR08, SR0E, SR0F;
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
index 487911e2926..a2dc1a7ec75 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/savage/savagefb_driver.c
@@ -385,7 +385,7 @@ SavageSetup2DEngine(struct savagefb_par  *par)
         BCI_SEND(GlobalBitmapDescriptor);
 
         /*
-         * I don't know why, sending this twice fixes the intial black screen,
+         * I don't know why, sending this twice fixes the initial black screen,
          * prevents X from crashing at least in Toshiba laptops with SavageIX.
          * --Tony
          */
@@ -2211,7 +2211,7 @@ static int __devinit savagefb_probe(struct pci_dev* dev,
                 goto failed_mmio;
 
         video_len = savage_init_hw(par);
-        /* FIXME: cant be negative */
+        /* FIXME: can't be negative */
         if (video_len < 0) {
                 err = video_len;
                 goto failed_mmio;
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 46d1a64fe80..56ef6b3a985 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -265,7 +265,7 @@ static unsigned long sm501fb_ps_to_hz(unsigned long psvalue)
         return (unsigned long)numerator;
 }
 
-/* sm501fb_hz_to_ps is identical to the oposite transform */
+/* sm501fb_hz_to_ps is identical to the opposite transform */
 
 #define sm501fb_hz_to_ps(x) sm501fb_ps_to_hz(x)
 
@@ -1719,7 +1719,7 @@ static int sm501fb_init_fb(struct fb_info *fb,
                (head == HEAD_CRT) ? &sm501fb_ops_crt : &sm501fb_ops_pnl,
                sizeof(struct fb_ops));
 
-        /* update ops dependant on what we've been passed */
+        /* update ops dependent on what we've been passed */
 
         if ((pd->flags & SM501FB_FLAG_USE_HWCURSOR) == 0)
                 par->ops.fb_cursor = NULL;
diff --git a/drivers/video/sstfb.c b/drivers/video/sstfb.c
index 2ab704118c4..2301c275d63 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/sstfb.c
@@ -221,7 +221,7 @@ static int __sst_wait_idle(u8 __iomem *vbase)
         while(1) {
                 if (__sst_read(vbase, STATUS) & STATUS_FBI_BUSY) {
                         f_dddprintk("status: busy\n");
-/* FIXME basicaly, this is a busy wait. maybe not that good. oh well;
+/* FIXME basically, this is a busy wait. maybe not that good. oh well;
  * this is a small loop after all.
  * Or maybe we should use mdelay() or udelay() here instead ? */
                         count = 0;
@@ -501,7 +501,7 @@ static int sstfb_set_par(struct fb_info *info)
         }
 
         if (IS_VOODOO2(par)) {
-                /* voodoo2 has 32 pixel wide tiles , BUT stange things
+                /* voodoo2 has 32 pixel wide tiles , BUT strange things
                    happen with odd number of tiles */
                 par->tiles_in_X = (info->var.xres + 63 ) / 64 * 2;
         } else {
@@ -920,11 +920,11 @@ static int __devinit sst_detect_ti(struct fb_info *info)
  * we get the 1st byte (M value) of preset f1,f7 and fB
  * why those 3 ? mmmh... for now, i'll do it the glide way...
  * and ask questions later. anyway, it seems that all the freq registers are
- * realy at their default state (cf specs) so i ask again, why those 3 regs ?
+ * really at their default state (cf specs) so i ask again, why those 3 regs ?
  * mmmmh.. it seems that's much more ugly than i thought. we use f0 and fA for
  * pll programming, so in fact, we *hope* that the f1, f7 & fB won't be
  * touched...
- * is it realy safe ? how can i reset this ramdac ? geee...
+ * is it really safe ? how can i reset this ramdac ? geee...
  */
 static int __devinit sst_detect_ics(struct fb_info *info)
 {
diff --git a/drivers/video/sticore.h b/drivers/video/sticore.h
index 7fe5be4bc70..addf7b615ef 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/sticore.h
@@ -79,7 +79,7 @@ struct sti_glob_cfg_ext {
          u8 curr_mon;                   /* current monitor configured */
          u8 friendly_boot;              /* in friendly boot mode */
         s16 power;                      /* power calculation (in Watts) */
-        s32 freq_ref;                   /* frequency refrence */
+        s32 freq_ref;                   /* frequency reference */
         u32 sti_mem_addr;               /* pointer to global sti memory (size=sti_mem_request) */
         u32 future_ptr;                 /* pointer to future data */
 };
diff --git a/drivers/video/tdfxfb.c b/drivers/video/tdfxfb.c
index 3ee5e63cfa4..a99b994c9b6 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/tdfxfb.c
@@ -877,12 +877,12 @@ static void tdfxfb_fillrect(struct fb_info *info,
         else
                 tdfx_rop = TDFX_ROP_XOR;
 
-        /* asume always rect->height < 4096 */
+        /* assume always rect->height < 4096 */
         if (dy + rect->height > 4095) {
                 dstbase = stride * dy;
                 dy = 0;
         }
-        /* asume always rect->width < 4096 */
+        /* assume always rect->width < 4096 */
         if (dx + rect->width > 4095) {
                 dstbase += dx * bpp >> 3;
                 dx = 0;
@@ -915,22 +915,22 @@ static void tdfxfb_copyarea(struct fb_info *info,
         u32 dstbase = 0;
         u32 srcbase = 0;
 
-        /* asume always area->height < 4096 */
+        /* assume always area->height < 4096 */
         if (sy + area->height > 4095) {
                 srcbase = stride * sy;
                 sy = 0;
         }
-        /* asume always area->width < 4096 */
+        /* assume always area->width < 4096 */
         if (sx + area->width > 4095) {
                 srcbase += sx * bpp >> 3;
                 sx = 0;
         }
-        /* asume always area->height < 4096 */
+        /* assume always area->height < 4096 */
         if (dy + area->height > 4095) {
                 dstbase = stride * dy;
                 dy = 0;
         }
-        /* asume always area->width < 4096 */
+        /* assume always area->width < 4096 */
         if (dx + area->width > 4095) {
                 dstbase += dx * bpp >> 3;
                 dx = 0;
@@ -1003,12 +1003,12 @@ static void tdfxfb_imageblit(struct fb_info *info, const struct fb_image *image)
 #else
         srcfmt = 0x400000;
 #endif
-        /* asume always image->height < 4096 */
+        /* assume always image->height < 4096 */
         if (dy + image->height > 4095) {
                 dstbase = stride * dy;
                 dy = 0;
         }
-        /* asume always image->width < 4096 */
+        /* assume always image->width < 4096 */
         if (dx + image->width > 4095) {
                 dstbase += dx * bpp >> 3;
                 dx = 0;
@@ -1124,7 +1124,7 @@ static int tdfxfb_cursor(struct fb_info *info, struct fb_cursor *cursor)
                  * lower half (least significant 64 bits) of a 128 bit word
                  * and pattern 1 the upper half. If you examine the data of
                  * the cursor image the graphics card uses then from the
-                 * begining you see line one of pattern 0, line one of
+                 * beginning you see line one of pattern 0, line one of
                  * pattern 1, line two of pattern 0, line two of pattern 1,
                  * etc etc. The linear stride for the cursor is always 16 bytes
                  * (128 bits) which is the maximum cursor width times two for
diff --git a/drivers/video/tmiofb.c b/drivers/video/tmiofb.c
index 9710bf8caea..0c341d73960 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/tmiofb.c
@@ -359,7 +359,7 @@ tmiofb_acc_wait(struct fb_info *info, unsigned int ccs)
 {
         struct tmiofb_par *par = info->par;
         /*
-         * This code can be called whith interrupts disabled.
+         * This code can be called with interrupts disabled.
          * So instead of relaying on irq to trigger the event,
          * poll the state till the necessary command is executed.
          */
diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
index 2c8364e9b63..68041d9dc26 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -769,7 +769,7 @@ static int dlfb_ops_ioctl(struct fb_info *info, unsigned int cmd,
 
                 /*
                  * If we have a damage-aware client, turn fb_defio "off"
-                 * To avoid perf imact of unecessary page fault handling.
+                 * To avoid perf imact of unnecessary page fault handling.
                  * Done by resetting the delay for this fb_info to a very
                  * long period. Pages will become writable and stay that way.
                  * Reset to normal value when all clients have closed this fb.
diff --git a/drivers/video/vga16fb.c b/drivers/video/vga16fb.c
index 28ccab44a39..53b2c5aae06 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/vga16fb.c
@@ -152,7 +152,7 @@ static inline int setop(int op)
 }
 
 /* Set the Enable Set/Reset Register and return its old value.  
-   The code here always uses value 0xf for thsi register. */
+   The code here always uses value 0xf for this register. */
 static inline int setsr(int sr)
 {
         int oldsr;
diff --git a/drivers/video/via/via_utility.c b/drivers/video/via/via_utility.c
index d05ccb62b55..35458a5eadc 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/via/via_utility.c
@@ -174,7 +174,7 @@ void viafb_set_gamma_table(int bpp, unsigned int *gamma_table)
         }
 
         /* If adjust Gamma value in SAMM, fill IGA1,
-           IGA2 Gamma table simultanous. */
+           IGA2 Gamma table simultaneous. */
         /* Switch to IGA2 Gamma Table */
         if ((active_device_amount > 1) &&
                 !((viaparinfo->chip_info->gfx_chip_name ==
diff --git a/drivers/video/via/via_utility.h b/drivers/video/via/via_utility.h
index 1670ba82143..f23be1708c1 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/via/via_utility.h
@@ -21,7 +21,7 @@
 #ifndef __VIAUTILITY_H__
 #define __VIAUTILITY_H__
 
-/* These functions are used to get infomation about device's state */
+/* These functions are used to get information about device's state */
 void viafb_get_device_support_state(u32 *support_state);
 void viafb_get_device_connect_state(u32 *connect_state);
 bool viafb_lcd_get_support_expand_state(u32 xres, u32 yres);
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index f555b891cc7..b64818953aa 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -2019,7 +2019,7 @@ int __init viafb_init(void)
                 return -EINVAL;
 
         printk(KERN_INFO
-       "VIA Graphics Intergration Chipset framebuffer %d.%d initializing\n",
+       "VIA Graphics Integration Chipset framebuffer %d.%d initializing\n",
                VERSION_MAJOR, VERSION_MINOR);
         return 0;
 }
diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c
index d8b12c32e3e..c8be8af0cc6 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/w100fb.c
@@ -1306,7 +1306,7 @@ static void w100_init_lcd(struct w100fb_par *par)
         union graphic_v_disp_u graphic_v_disp;
         union crtc_total_u crtc_total;
 
-        /* w3200 doesnt like undefined bits being set so zero register values first */
+        /* w3200 doesn't like undefined bits being set so zero register values first */
 
         active_h_disp.val = 0;
         active_h_disp.f.active_h_start=mode->left_margin;
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index 38e96ab9094..5ef385bfed1 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -545,7 +545,7 @@ static void omap_w1_write_byte(void *_hdq, u8 byte)
                 return;
         }
 
-        /* Second write, data transfered. Release the module */
+        /* Second write, data transferred. Release the module */
         if (hdq_data->init_trans > 1) {
                 omap_hdq_put(hdq_data);
                 ret = mutex_lock_interruptible(&hdq_data->hdq_mutex);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b69d7148255..1b0f98bc51b 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -933,7 +933,7 @@ config PNX833X_WDT
         depends on SOC_PNX8335
         help
           Hardware driver for the PNX833x's watchdog. This is a
-          watchdog timer that will reboot the machine after a programable
+          watchdog timer that will reboot the machine after a programmable
           timer has expired and no process has written to /dev/watchdog during
           that time.
 
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index d520bf9c335..3f8608b922a 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -4,7 +4,7 @@
 
 # Only one watchdog can succeed. We probe the ISA/PCI/USB based
 # watchdog-cards first, then the architecture specific watchdog
-# drivers and then the architecture independant "softdog" driver.
+# drivers and then the architecture independent "softdog" driver.
 # This means that if your ISA/PCI/USB card isn't detected that
 # you can fall back to an architecture specific driver and if
 # that also fails then you can fall back to the software watchdog
@@ -153,7 +153,7 @@ obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwd.o
 # Xen
 obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 
-# Architecture Independant
+# Architecture Independent
 obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
 obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
 obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
diff --git a/drivers/watchdog/acquirewdt.c b/drivers/watchdog/acquirewdt.c
index 2ffce4d7544..b6a2b58cbe6 100644
--- a/drivers/watchdog/acquirewdt.c
+++ b/drivers/watchdog/acquirewdt.c
@@ -26,7 +26,7 @@
  *      Theory of Operation:
  *              The Watch-Dog Timer is provided to ensure that standalone
  *              Systems can always recover from catastrophic conditions that
- *              caused the CPU to crash. This condition may have occured by
+ *              caused the CPU to crash. This condition may have occurred by
  *              external EMI or a software bug. When the CPU stops working
  *              correctly, hardware on the board will either perform a hardware
  *              reset (cold boot) or a non-maskable interrupt (NMI) to bring the
diff --git a/drivers/watchdog/pc87413_wdt.c b/drivers/watchdog/pc87413_wdt.c
index 139d773300c..b7c13905157 100644
--- a/drivers/watchdog/pc87413_wdt.c
+++ b/drivers/watchdog/pc87413_wdt.c
@@ -49,7 +49,7 @@
 #define WDT_DATA_IO_PORT    (WDT_INDEX_IO_PORT+1)
 #define SWC_LDN             0x04
 #define SIOCFG2             0x22        /* Serial IO register */
-#define WDCTL               0x10        /* Watchdog-Timer-Controll-Register */
+#define WDCTL               0x10        /* Watchdog-Timer-Control-Register */
 #define WDTO                0x11        /* Watchdog timeout register */
 #define WDCFG               0x12        /* Watchdog config register */
 
diff --git a/drivers/watchdog/sbc7240_wdt.c b/drivers/watchdog/sbc7240_wdt.c
index 67ddeb1c830..ff11504c376 100644
--- a/drivers/watchdog/sbc7240_wdt.c
+++ b/drivers/watchdog/sbc7240_wdt.c
@@ -273,7 +273,7 @@ static int __init sbc7240_wdt_init(void)
 
         /* The IO port 0x043 used to disable the watchdog
          * is already claimed by the system timer, so we
-         * cant request_region() it ...*/
+         * can't request_region() it ...*/
 
         if (timeout < 1 || timeout > SBC7240_MAX_TIMEOUT) {
                 timeout = SBC7240_TIMEOUT;
diff --git a/drivers/watchdog/sch311x_wdt.c b/drivers/watchdog/sch311x_wdt.c
index b61ab1c5429..c7cf4b01f58 100644
--- a/drivers/watchdog/sch311x_wdt.c
+++ b/drivers/watchdog/sch311x_wdt.c
@@ -201,7 +201,7 @@ static void sch311x_wdt_get_status(int *status)
         spin_lock(&sch311x_wdt_data.io_lock);
 
         /* -- Watchdog timer control --
-         * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
+         * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occurred
          * Bit 1   Reserved
          * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
          * Bit 3   P20 Force Timeout enabled:
diff --git a/drivers/watchdog/shwdt.c b/drivers/watchdog/shwdt.c
index 4e3e7eb5919..db84f2322d1 100644
--- a/drivers/watchdog/shwdt.c
+++ b/drivers/watchdog/shwdt.c
@@ -50,7 +50,7 @@
  * necssary.
  *
  * As a result of this timing problem, the only modes that are particularly
- * feasible are the 4096 and the 2048 divisors, which yeild 5.25 and 2.62ms
+ * feasible are the 4096 and the 2048 divisors, which yield 5.25 and 2.62ms
  * overflow periods respectively.
  *
  * Also, since we can't really expect userspace to be responsive enough
diff --git a/drivers/watchdog/smsc37b787_wdt.c b/drivers/watchdog/smsc37b787_wdt.c
index df88cfa05f3..e97b0499bd0 100644
--- a/drivers/watchdog/smsc37b787_wdt.c
+++ b/drivers/watchdog/smsc37b787_wdt.c
@@ -191,7 +191,7 @@ static inline void wdt_timer_conf(unsigned char conf)
 static inline void wdt_timer_ctrl(unsigned char reg)
 {
         /* -- Watchdog timer control --
-         * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occured
+         * Bit 0   Status Bit: 0 = Timer counting, 1 = Timeout occurred
          * Bit 1   Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz
          * Bit 2   Force Timeout: 1 = Forces WD timeout event (self-cleaning)
          * Bit 3   P20 Force Timeout enabled:
diff --git a/drivers/watchdog/sp805_wdt.c b/drivers/watchdog/sp805_wdt.c
index 0a0efe713bc..0d80e08b643 100644
--- a/drivers/watchdog/sp805_wdt.c
+++ b/drivers/watchdog/sp805_wdt.c
@@ -90,7 +90,7 @@ static void wdt_setload(unsigned int timeout)
         /*
          * sp805 runs counter with given value twice, after the end of first
          * counter it gives an interrupt and then starts counter again. If
-         * interrupt already occured then it resets the system. This is why
+         * interrupt already occurred then it resets the system. This is why
          * load is half of what should be required.
          */
         load = div_u64(rate, 2) * timeout - 1;
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index 036343ba204..42d6c930cc8 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -5,7 +5,7 @@
  * domain gets 1024 event channels, but NR_IRQ is not that large, we
  * must dynamically map irqs<->event channels.  The event channels
  * interface with the rest of the kernel by defining a xen interrupt
- * chip.  When an event is recieved, it is mapped to an irq and sent
+ * chip.  When an event is received, it is mapped to an irq and sent
  * through the normal interrupt processing path.
  *
  * There are four kinds of events which can be mapped to an event
@@ -416,7 +416,7 @@ static int __must_check xen_allocate_irq_dynamic(void)
 #ifdef CONFIG_X86_IO_APIC
         /*
          * For an HVM guest or domain 0 which see "real" (emulated or
-         * actual repectively) GSIs we allocate dynamic IRQs
+         * actual respectively) GSIs we allocate dynamic IRQs
          * e.g. those corresponding to event channels or MSIs
          * etc. from the range above those "real" GSIs to avoid
          * collisions.