| Commit message (Collapse) | Author | Age |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The original IPUv3 driver uses readl()/writel() to
access the IPUv3 registers in the following way where
ipu->reg_base is a pointer which points to a 32 bit
I/O memory cell of a certain IPUv3 deblock's base address:
writel(value, ipu->reg_base + offset);
readl(ipu->reg_base + offset);
This makes the register offset values shrink 4 times,
comparing to the offset values documented in the
reference manual. For example, we need to change the
offset value from 0x003C to 0x003C/4 so that we may
access the register IPU_INT_CTRL_1 correctly.
This patch redefines the type of ipu->reg_base to
'void __iomem *', then the offset values can be the
same to what they are documented.
Also, this patch corrects some register relevant
macros by wrapping their arguments with parentheses
to avoid any unsafe decipher.
Reviewed-by: Robby Cai <R63905@freescale.com>
Cc: Oliver Brown <oliver.brown@freescale.com>
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
|
| |
|
|
|
|
|
|
|
|
| |
TV will show 639x480p60 when HDMI output 640x480p60.
The same issue can be found when pixel clock sources from ipu internally.
All video modes whose pixel clocks derive from DI clock work OK.
It is caused by the wrong parent clock rate the driver gets.
Fix the issue by getting the right parent clock(ipu->pixel_clk_sel).
Signed-off-by: Sandor Yu <R01008@freescale.com>
|
|
|
This is a fast-forward porting of ipuv3 driver from 3.5.7 kernel to
kernel 3.10. The change set is kept as minimum as possible with only
making necessary code changes to adapt 3.10 kernel internal API and
framework updates. Everything else should be same as 3.5.7 one. The
change set consists of the following.
* Remove unused Kconfig options MXC_IPU_V3D, MXC_IPU_V3EX and
MXC_IPU_V3H
* Comment out busfreq calls
* Move ipu-v3.h into include/linux/, and remove all <mach/*> includes
* Drop __devinit and __devexit
* Remove assignment of pltfm_data->pg = imx6q_ipu_pg;
* Use generic device_reset() API rather than ipu_pltfm_data->init()
hook to reset IPU
* Includes <linux/sched/rt.h> ipu_device.c to fix undeclared
MAX_USER_RT_PRIO error
* Change compatible string to "fsl,imx6q-ipu" to align with community
kernel
* Define irq_sync before irq_err in DTS to align with community kernel
* Drop "ipu1_" and "ipu2_" from clock names to save the handling of the
second parameter of devm_clk_get()
* Remove the buggy csi_clk setup in ipu_clk_setup_enable() and validate
the clock before operate on it in ipu_csi_enable_mclk()
* Replace iram API (linux/iram_alloc.h) with generic memory pool API
(linux/genalloc.h) in VDOA driver
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
|
