Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 463 insertions, 0 deletions

diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h
new file mode 100644
index 000000000000..cf056a990f18
--- /dev/null
+++ b/drivers/char/rio/cirrus.h
@@ -0,0 +1,463 @@
+/****************************************************************************
+ *******                                                              *******
+ *******                CIRRUS.H                                      *******
+ *******                                                              *******
+ ****************************************************************************
+
+ Author  : Jeremy Rolls
+ Date    : 3 Aug 1990
+
+ *
+ *  (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+ Version : 0.01
+
+
+                            Mods
+ ----------------------------------------------------------------------------
+  Date     By                Description
+ ----------------------------------------------------------------------------
+
+ ***************************************************************************/
+
+#ifndef _cirrus_h
+#ifndef lint
+/* static char* _cirrus_h_sccs = "@(#)cirrus.h  1.16"; */
+#endif
+#define _cirrus_h 1
+
+#ifdef RTA
+#define TO_UART RX
+#define TO_DRIVER TX
+#endif
+
+#ifdef HOST
+#define TO_UART TX
+#define TO_DRIVER RX
+#endif
+#ifdef RTA
+/* Miscellaneous defines for CIRRUS addresses and related logic for
+   interrupts etc.
+*/
+#define MAP(a)          ((short *)(cirrus_base + (a)))
+#define outp(a,b)       (*MAP (a) =(b))
+#define inp(a)          ((*MAP (a)) & 0xff)
+#define CIRRUS_FIRST    (short*)0x7300
+#define CIRRUS_SECOND   (short*)0x7200
+#define CIRRUS_THIRD    (short*)0x7100
+#define CIRRUS_FOURTH   (short*)0x7000
+#define PORTS_ON_CIRRUS 4
+#define CIRRUS_FIFO_SIZE        12
+#define SPACE           0x20
+#define TAB             0x09
+#define LINE_FEED       0x0a
+#define CARRIAGE_RETURN 0x0d
+#define BACKSPACE       0x08
+#define SPACES_IN_TABS  8
+#define SEND_ESCAPE     0x00
+#define START_BREAK     0x81
+#define TIMER_TICK      0x82
+#define STOP_BREAK      0x83
+#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH)))
+#define txack1  ((short *)0x7104) 
+#define rxack1  ((short *)0x7102) 
+#define mdack1  ((short *)0x7106)
+#define txack2  ((short *)0x7006) 
+#define rxack2  ((short *)0x7004) 
+#define mdack2  ((short *)0x7100) 
+#define int_latch       ((short *) 0x7800)
+#define int_status      ((short *) 0x7c00) 
+#define tx1_pending     0x20 
+#define rx1_pending     0x10 
+#define md1_pending     0x40 
+#define tx2_pending     0x02 
+#define rx2_pending     0x01 
+#define md2_pending     0x40 
+#define module1_bits    0x07
+#define module1_modern  0x08
+#define module2_bits    0x70
+#define module2_modern  0x80
+#define module_blank    0xf
+#define rs232_d25       0x0
+#define rs232_rj45      0x1
+#define rs422_d25       0x3
+#define parallel        0x5
+
+#define CLK0    0x00
+#define CLK1    0x01
+#define CLK2    0x02
+#define CLK3    0x03
+#define CLK4    0x04
+
+#define CIRRUS_REVC    0x42
+#define CIRRUS_REVE    0x44
+
+#define TURNON  1
+#define TURNOFF 0
+
+/* The list of CIRRUS registers. 
+   NB. These registers are relative values on 8 bit boundaries whereas
+   on the RTA's the CIRRUS registers are on word boundaries. Use pointer
+   arithmetic (short *) to obtain the real addresses required */
+#define ccr     0x05    /* Channel Command Register     */
+#define ier     0x06    /* Interrupt Enable Register    */
+#define cor1    0x08    /* Channel Option Register 1    */
+#define cor2    0x09    /* Channel Option Register 2    */
+#define cor3    0x0a    /* Channel Option Register 3    */
+#define cor4    0x1e    /* Channel Option Register 4    */
+#define cor5    0x1f    /* Channel Option Register 5    */
+
+#define ccsr    0x0b    /* Channel Control Status Register */
+#define rdcr    0x0e    /* Receive Data Count Register  */
+#define tdcr    0x12    /* Transmit Data Count Register */
+#define mcor1   0x15    /* Modem Change Option Register 1 */
+#define mcor2   0x16    /* Modem Change Option Regsiter 2 */
+
+#define livr    0x18    /* Local Interrupt Vector Register */
+#define schr1   0x1a    /* Special Character Register 1 */
+#define schr2   0x1b    /* Special Character Register 2 */
+#define schr3   0x1c    /* Special Character Register 3 */
+#define schr4   0x1d    /* Special Character Register 4 */
+
+#define rtr     0x20    /* Receive Timer Register */
+#define rtpr    0x21    /* Receive Timeout Period Register */
+#define lnc     0x24    /* Lnext character */
+
+#define rivr    0x43    /* Receive Interrupt Vector Register    */
+#define tivr    0x42    /* Transmit Interrupt Vector Register   */
+#define mivr    0x41    /* Modem Interrupt Vector Register      */
+#define gfrcr   0x40    /* Global Firmware Revision code Reg    */
+#define ricr    0x44    /* Receive Interrupting Channel Reg     */
+#define ticr    0x45    /* Transmit Interrupting Channel Reg    */
+#define micr    0x46    /* Modem Interrupting Channel Register  */
+
+#define gcr     0x4b    /* Global configuration register*/
+#define misr    0x4c    /* Modem interrupt status register */
+
+#define rbusr   0x59
+#define tbusr   0x5a
+#define mbusr   0x5b
+
+#define eoir    0x60    /* End Of Interrupt Register */
+#define rdsr    0x62    /* Receive Data / Status Register */
+#define tdr     0x63    /* Transmit Data Register */
+#define svrr    0x67    /* Service Request Register */
+
+#define car     0x68    /* Channel Access Register */
+#define mir     0x69    /* Modem Interrupt Register */
+#define tir     0x6a    /* Transmit Interrupt Register */
+#define rir     0x6b    /* Receive Interrupt Register */
+#define msvr1   0x6c    /* Modem Signal Value Register 1 */
+#define msvr2   0x6d    /* Modem Signal Value Register 2*/
+#define psvr    0x6f    /* Printer Signal Value Register*/
+
+#define tbpr    0x72    /* Transmit Baud Rate Period Register */
+#define tcor    0x76    /* Transmit Clock Option Register */
+
+#define rbpr    0x78    /* Receive Baud Rate Period Register */
+#define rber    0x7a    /* Receive Baud Rate Extension Register */
+#define rcor    0x7c    /* Receive Clock Option Register*/
+#define ppr     0x7e    /* Prescalar Period Register    */
+
+/* Misc registers used for forcing the 1400 out of its reset woes */
+#define airl    0x6d
+#define airm    0x6e
+#define airh    0x6f
+#define btcr    0x66
+#define mtcr    0x6c
+#define tber    0x74
+
+#endif                          /* #ifdef RTA */
+
+
+/* Bit fields for particular registers */
+
+/* GCR */
+#define GCR_SERIAL      0x00    /* Configure as serial channel */
+#define GCR_PARALLEL    0x80    /* Configure as parallel channel */
+
+/* RDSR - when status read from FIFO */
+#define RDSR_BREAK              0x08    /* Break received */
+#define RDSR_TIMEOUT            0x80    /* No new data timeout */
+#define RDSR_SC1                0x10    /* Special char 1 (tx XON) matched */
+#define RDSR_SC2                0x20    /* Special char 2 (tx XOFF) matched */
+#define RDSR_SC12_MASK          0x30    /* Mask for special chars 1 and 2 */
+
+/* PPR */
+#define PPR_DEFAULT     0x31    /* Default value - for a 25Mhz clock gives
+                                   a timeout period of 1ms */
+
+/* LIVR */
+#define LIVR_EXCEPTION  0x07    /* Receive exception interrupt */
+
+/* CCR */
+#define CCR_RESET       0x80    /* Reset channel */
+#define CCR_CHANGE      0x4e    /* COR's have changed - NB always change all
+                                   COR's */
+#define CCR_WFLUSH      0x82    /* Flush transmit FIFO and TSR / THR */
+
+#define CCR_SENDSC1     0x21    /* Send special character one */
+#define CCR_SENDSC2     0x22    /* Send special character two */
+#define CCR_SENDSC3     0x23    /* Send special character three */
+#define CCR_SENDSC4     0x24    /* Send special character four */
+
+#define CCR_TENABLE     0x18    /* Enable transmitter */
+#define CCR_TDISABLE    0x14    /* Disable transmitter */
+#define CCR_RENABLE     0x12    /* Enable receiver */
+#define CCR_RDISABLE    0x11    /* Disable receiver */
+
+#define CCR_READY       0x00    /* CCR is ready for another command */
+
+/* CCSR */
+#define CCSR_TXENABLE   0x08    /* Transmitter enable */
+#define CCSR_RXENABLE   0x80    /* Receiver enable */
+#define CCSR_TXFLOWOFF  0x04    /* Transmit flow off */
+#define CCSR_TXFLOWON   0x02    /* Transmit flow on */
+
+/* SVRR */
+#define SVRR_RECEIVE    0x01    /* Receive interrupt pending */
+#define SVRR_TRANSMIT   0x02    /* Transmit interrupt pending */
+#define SVRR_MODEM      0x04    /* Modem interrupt pending */
+
+/* CAR */
+#define CAR_PORTS       0x03    /* Bit fields for ports */
+
+/* IER */
+#define IER_MODEM       0x80    /* Change in modem status */
+#define IER_RECEIVE     0x10    /* Good data / data exception */
+#define IER_TRANSMITR   0x04    /* Transmit ready (FIFO empty) */
+#define IER_TRANSMITE   0x02    /* Transmit empty */
+#define IER_TIMEOUT     0x01    /* Timeout on no data */
+
+#define IER_DEFAULT     0x94    /* Default values */
+#define IER_PARALLEL    0x84    /* Default for Parallel */
+#define IER_EMPTY       0x92    /* Transmitter empty rather than ready */
+
+/* COR1 - Driver only */
+#define COR1_INPCK      0x10    /* Check parity of received characters */
+
+/* COR1 - driver and RTA */
+#define COR1_ODD        0x80    /* Odd parity */
+#define COR1_EVEN       0x00    /* Even parity */
+#define COR1_NOP        0x00    /* No parity */
+#define COR1_FORCE      0x20    /* Force parity */
+#define COR1_NORMAL     0x40    /* With parity */
+#define COR1_1STOP      0x00    /* 1 stop bit */
+#define COR1_15STOP     0x04    /* 1.5 stop bits */
+#define COR1_2STOP      0x08    /* 2 stop bits */
+#define COR1_5BITS      0x00    /* 5 data bits */
+#define COR1_6BITS      0x01    /* 6 data bits */
+#define COR1_7BITS      0x02    /* 7 data bits */
+#define COR1_8BITS      0x03    /* 8 data bits */
+
+#define COR1_HOST       0xef    /* Safe host bits */
+
+/* RTA only */
+#define COR1_CINPCK     0x00    /* Check parity of received characters */
+#define COR1_CNINPCK    0x10    /* Don't check parity */
+
+/* COR2 bits for both RTA and driver use */
+#define COR2_IXANY      0x80    /* IXANY - any character is XON */
+#define COR2_IXON       0x40    /* IXON - enable tx soft flowcontrol */
+#define COR2_RTSFLOW    0x02    /* Enable tx hardware flow control */
+
+/* Additional driver bits */
+#define COR2_HUPCL      0x20    /* Hang up on close */
+#define COR2_CTSFLOW    0x04    /* Enable rx hardware flow control */
+#define COR2_IXOFF      0x01    /* Enable rx software flow control */
+#define COR2_DTRFLOW    0x08    /* Enable tx hardware flow control */
+
+/* RTA use only */
+#define COR2_ETC        0x20    /* Embedded transmit options */
+#define COR2_LOCAL      0x10    /* Local loopback mode */
+#define COR2_REMOTE     0x08    /* Remote loopback mode */
+#define COR2_HOST       0xc2    /* Safe host bits */
+
+/* COR3 - RTA use only */
+#define COR3_SCDRNG     0x80    /* Enable special char detect for range */
+#define COR3_SCD34      0x40    /* Special character detect for SCHR's 3 + 4 */
+#define COR3_FCT        0x20    /* Flow control transparency */
+#define COR3_SCD12      0x10    /* Special character detect for SCHR's 1 + 2 */
+#define COR3_FIFO12     0x0c    /* 12 chars for receive FIFO threshold */
+#define COR3_FIFO10     0x0a    /* 10 chars for receive FIFO threshold */
+#define COR3_FIFO8      0x08    /* 8 chars for receive FIFO threshold */
+#define COR3_FIFO6      0x06    /* 6 chars for receive FIFO threshold */
+
+#define COR3_THRESHOLD  COR3_FIFO8      /* MUST BE LESS THAN MCOR_THRESHOLD */
+
+#define COR3_DEFAULT    (COR3_FCT | COR3_THRESHOLD)
+                                /* Default bits for COR3 */
+
+/* COR4 driver and RTA use */
+#define COR4_IGNCR      0x80    /* Throw away CR's on input */
+#define COR4_ICRNL      0x40    /* Map CR -> NL on input */
+#define COR4_INLCR      0x20    /* Map NL -> CR on input */
+#define COR4_IGNBRK     0x10    /* Ignore Break */
+#define COR4_NBRKINT    0x08    /* No interrupt on break (-BRKINT) */
+#define COR4_RAISEMOD   0x01    /* Raise modem output lines on non-zero baud */
+
+
+/* COR4 driver only */
+#define COR4_IGNPAR     0x04    /* IGNPAR (ignore characters with errors) */
+#define COR4_PARMRK     0x02    /* PARMRK */
+
+#define COR4_HOST       0xf8    /* Safe host bits */
+
+/* COR4 RTA only */
+#define COR4_CIGNPAR    0x02    /* Thrown away bad characters */
+#define COR4_CPARMRK    0x04    /* PARMRK characters */
+#define COR4_CNPARMRK   0x03    /* Don't PARMRK */
+
+/* COR5 driver and RTA use */
+#define COR5_ISTRIP     0x80    /* Strip input chars to 7 bits */
+#define COR5_LNE        0x40    /* Enable LNEXT processing */
+#define COR5_CMOE       0x20    /* Match good and errored characters */
+#define COR5_ONLCR      0x02    /* NL -> CR NL on output */
+#define COR5_OCRNL      0x01    /* CR -> NL on output */
+
+/*
+** Spare bits - these are not used in the CIRRUS registers, so we use
+** them to set various other features.
+*/
+/*
+** tstop and tbusy indication
+*/
+#define COR5_TSTATE_ON  0x08    /* Turn on monitoring of tbusy and tstop */
+#define COR5_TSTATE_OFF 0x04    /* Turn off monitoring of tbusy and tstop */
+/*
+** TAB3
+*/
+#define COR5_TAB3       0x10    /* TAB3 mode */
+
+#define COR5_HOST       0xc3    /* Safe host bits */
+
+/* CCSR */
+#define CCSR_TXFLOFF    0x04    /* Tx is xoffed */
+
+/* MSVR1 */
+/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the
+   RTA. This is because otherwise DCD would get lost on the 1 parallel / 3
+   serial option.
+*/
+#define MSVR1_CD        0x80    /* CD (DSR on Cirrus) */
+#define MSVR1_RTS       0x40    /* RTS (CTS on Cirrus) */
+#define MSVR1_RI        0x20    /* RI */
+#define MSVR1_DTR       0x10    /* DTR (CD on Cirrus) */
+#define MSVR1_CTS       0x01    /* CTS output pin (RTS on Cirrus) */
+/* Next two used to indicate state of tbusy and tstop to driver */
+#define MSVR1_TSTOP     0x08    /* Set if port flow controlled */
+#define MSVR1_TEMPTY    0x04    /* Set if port tx buffer empty */
+
+#define MSVR1_HOST      0xf3    /* The bits the host wants */
+
+/* MSVR2 */
+#define MSVR2_DSR       0x02    /* DSR output pin (DTR on Cirrus) */
+
+/* MCOR */
+#define MCOR_CD         0x80    /* CD (DSR on Cirrus) */
+#define MCOR_RTS        0x40    /* RTS (CTS on Cirrus) */
+#define MCOR_RI         0x20    /* RI */
+#define MCOR_DTR        0x10    /* DTR (CD on Cirrus) */
+
+#define MCOR_DEFAULT    (MCOR_CD | MCOR_RTS | MCOR_RI | MCOR_DTR)
+#define MCOR_FULLMODEM  MCOR_DEFAULT
+#define MCOR_RJ45       (MCOR_CD | MCOR_RTS | MCOR_DTR)
+#define MCOR_RESTRICTED (MCOR_CD | MCOR_RTS)
+
+/* More MCOR - H/W Handshake (flowcontrol) stuff */
+#define MCOR_THRESH8    0x08    /* eight characters then we stop */
+#define MCOR_THRESH9    0x09    /* nine characters then we stop */
+#define MCOR_THRESH10   0x0A    /* ten characters then we stop */
+#define MCOR_THRESH11   0x0B    /* eleven characters then we stop */
+
+#define MCOR_THRESHBITS 0x0F    /* mask for ANDing out the above */
+
+#define MCOR_THRESHOLD  MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */
+
+
+/* RTPR */
+#define RTPR_DEFAULT    0x02    /* Default */
+
+
+/* Defines for the subscripts of a CONFIG packet */
+#define CONFIG_COR1     1       /* Option register 1 */
+#define CONFIG_COR2     2       /* Option register 2 */
+#define CONFIG_COR4     3       /* Option register 4 */
+#define CONFIG_COR5     4       /* Option register 5 */
+#define CONFIG_TXXON    5       /* Tx XON character */
+#define CONFIG_TXXOFF   6       /* Tx XOFF character */
+#define CONFIG_RXXON    7       /* Rx XON character */
+#define CONFIG_RXXOFF   8       /* Rx XOFF character */
+#define CONFIG_LNEXT    9       /* LNEXT character */
+#define CONFIG_TXBAUD   10      /* Tx baud rate */
+#define CONFIG_RXBAUD   11      /* Rx baud rate */
+
+/* Port status stuff */
+#define IDLE_CLOSED     0       /* Closed */
+#define IDLE_OPEN       1       /* Idle open */
+#define IDLE_BREAK      2       /* Idle on break */
+
+/* Subscript of MODEM STATUS packet */
+#define MODEM_VALUE     3       /* Current values of handshake pins */
+/* Subscript of SBREAK packet */
+#define BREAK_LENGTH    1       /* Length of a break in slices of 0.01 seconds
+                                   0 = stay on break until an EBREAK command
+                                   is sent */
+
+
+#define PRE_EMPTIVE     0x80    /* Pre-emptive bit in command field */
+
+/* Packet types going from Host to remote - with the exception of OPEN, MOPEN,
+   CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not
+   be used 
+*/
+#define OPEN            0x00    /* Open a port */
+#define CONFIG          0x01    /* Configure a port */
+#define MOPEN           0x02    /* Modem open (block for DCD) */
+#define CLOSE           0x03    /* Close a port */
+#define WFLUSH          (0x04 | PRE_EMPTIVE) /* Write flush */
+#define RFLUSH          (0x05 | PRE_EMPTIVE) /* Read flush */
+#define RESUME          (0x06 | PRE_EMPTIVE) /* Resume if xoffed */
+#define SBREAK          0x07    /* Start break */
+#define EBREAK          0x08    /* End break */
+#define SUSPEND         (0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */
+#define FCLOSE          (0x0a | PRE_EMPTIVE) /* Force close */
+#define XPRINT          0x0b    /* Xprint packet */
+#define MBIS            (0x0c | PRE_EMPTIVE) /* Set modem lines */
+#define MBIC            (0x0d | PRE_EMPTIVE) /* Clear modem lines */
+#define MSET            (0x0e | PRE_EMPTIVE) /* Set modem lines */
+#define PCLOSE          0x0f    /* Pseudo close - Leaves rx/tx enabled */
+#define MGET            (0x10 | PRE_EMPTIVE) /* Force update of modem status */
+#define MEMDUMP         (0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */
+#define READ_REGISTER   (0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */
+
+/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS
+   use data[4] / data[3] to indicate current state and modem status respectively
+*/ 
+
+#define COMPLETE        (0x20 | PRE_EMPTIVE)
+                                /* Command complete */
+#define BREAK_RECEIVED  (0x21 | PRE_EMPTIVE)
+                                /* Break received */
+#define MODEM_STATUS    (0x22 | PRE_EMPTIVE)
+                                /* Change in modem status */
+
+/* "Command" packet that could go either way - handshake wake-up */
+#define HANDSHAKE       (0x23 | PRE_EMPTIVE)
+                                /* Wake-up to HOST / RTA */
+
+#endif