From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- drivers/char/rio/cirrus.h | 463 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 463 insertions(+) create mode 100644 drivers/char/rio/cirrus.h (limited to 'drivers/char/rio/cirrus.h') diff --git a/drivers/char/rio/cirrus.h b/drivers/char/rio/cirrus.h new file mode 100644 index 000000000000..cf056a990f18 --- /dev/null +++ b/drivers/char/rio/cirrus.h @@ -0,0 +1,463 @@ +/**************************************************************************** + ******* ******* + ******* CIRRUS.H ******* + ******* ******* + **************************************************************************** + + Author : Jeremy Rolls + Date : 3 Aug 1990 + + * + * (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Version : 0.01 + + + Mods + ---------------------------------------------------------------------------- + Date By Description + ---------------------------------------------------------------------------- + + ***************************************************************************/ + +#ifndef _cirrus_h +#ifndef lint +/* static char* _cirrus_h_sccs = "@(#)cirrus.h 1.16"; */ +#endif +#define _cirrus_h 1 + +#ifdef RTA +#define TO_UART RX +#define TO_DRIVER TX +#endif + +#ifdef HOST +#define TO_UART TX +#define TO_DRIVER RX +#endif +#ifdef RTA +/* Miscellaneous defines for CIRRUS addresses and related logic for + interrupts etc. +*/ +#define MAP(a) ((short *)(cirrus_base + (a))) +#define outp(a,b) (*MAP (a) =(b)) +#define inp(a) ((*MAP (a)) & 0xff) +#define CIRRUS_FIRST (short*)0x7300 +#define CIRRUS_SECOND (short*)0x7200 +#define CIRRUS_THIRD (short*)0x7100 +#define CIRRUS_FOURTH (short*)0x7000 +#define PORTS_ON_CIRRUS 4 +#define CIRRUS_FIFO_SIZE 12 +#define SPACE 0x20 +#define TAB 0x09 +#define LINE_FEED 0x0a +#define CARRIAGE_RETURN 0x0d +#define BACKSPACE 0x08 +#define SPACES_IN_TABS 8 +#define SEND_ESCAPE 0x00 +#define START_BREAK 0x81 +#define TIMER_TICK 0x82 +#define STOP_BREAK 0x83 +#define BASE(a) ((a) < 4 ? (short*)CIRRUS_FIRST : ((a) < 8 ? (short *)CIRRUS_SECOND : ((a) < 12 ? (short*)CIRRUS_THIRD : (short *)CIRRUS_FOURTH))) +#define txack1 ((short *)0x7104) +#define rxack1 ((short *)0x7102) +#define mdack1 ((short *)0x7106) +#define txack2 ((short *)0x7006) +#define rxack2 ((short *)0x7004) +#define mdack2 ((short *)0x7100) +#define int_latch ((short *) 0x7800) +#define int_status ((short *) 0x7c00) +#define tx1_pending 0x20 +#define rx1_pending 0x10 +#define md1_pending 0x40 +#define tx2_pending 0x02 +#define rx2_pending 0x01 +#define md2_pending 0x40 +#define module1_bits 0x07 +#define module1_modern 0x08 +#define module2_bits 0x70 +#define module2_modern 0x80 +#define module_blank 0xf +#define rs232_d25 0x0 +#define rs232_rj45 0x1 +#define rs422_d25 0x3 +#define parallel 0x5 + +#define CLK0 0x00 +#define CLK1 0x01 +#define CLK2 0x02 +#define CLK3 0x03 +#define CLK4 0x04 + +#define CIRRUS_REVC 0x42 +#define CIRRUS_REVE 0x44 + +#define TURNON 1 +#define TURNOFF 0 + +/* The list of CIRRUS registers. + NB. These registers are relative values on 8 bit boundaries whereas + on the RTA's the CIRRUS registers are on word boundaries. Use pointer + arithmetic (short *) to obtain the real addresses required */ +#define ccr 0x05 /* Channel Command Register */ +#define ier 0x06 /* Interrupt Enable Register */ +#define cor1 0x08 /* Channel Option Register 1 */ +#define cor2 0x09 /* Channel Option Register 2 */ +#define cor3 0x0a /* Channel Option Register 3 */ +#define cor4 0x1e /* Channel Option Register 4 */ +#define cor5 0x1f /* Channel Option Register 5 */ + +#define ccsr 0x0b /* Channel Control Status Register */ +#define rdcr 0x0e /* Receive Data Count Register */ +#define tdcr 0x12 /* Transmit Data Count Register */ +#define mcor1 0x15 /* Modem Change Option Register 1 */ +#define mcor2 0x16 /* Modem Change Option Regsiter 2 */ + +#define livr 0x18 /* Local Interrupt Vector Register */ +#define schr1 0x1a /* Special Character Register 1 */ +#define schr2 0x1b /* Special Character Register 2 */ +#define schr3 0x1c /* Special Character Register 3 */ +#define schr4 0x1d /* Special Character Register 4 */ + +#define rtr 0x20 /* Receive Timer Register */ +#define rtpr 0x21 /* Receive Timeout Period Register */ +#define lnc 0x24 /* Lnext character */ + +#define rivr 0x43 /* Receive Interrupt Vector Register */ +#define tivr 0x42 /* Transmit Interrupt Vector Register */ +#define mivr 0x41 /* Modem Interrupt Vector Register */ +#define gfrcr 0x40 /* Global Firmware Revision code Reg */ +#define ricr 0x44 /* Receive Interrupting Channel Reg */ +#define ticr 0x45 /* Transmit Interrupting Channel Reg */ +#define micr 0x46 /* Modem Interrupting Channel Register */ + +#define gcr 0x4b /* Global configuration register*/ +#define misr 0x4c /* Modem interrupt status register */ + +#define rbusr 0x59 +#define tbusr 0x5a +#define mbusr 0x5b + +#define eoir 0x60 /* End Of Interrupt Register */ +#define rdsr 0x62 /* Receive Data / Status Register */ +#define tdr 0x63 /* Transmit Data Register */ +#define svrr 0x67 /* Service Request Register */ + +#define car 0x68 /* Channel Access Register */ +#define mir 0x69 /* Modem Interrupt Register */ +#define tir 0x6a /* Transmit Interrupt Register */ +#define rir 0x6b /* Receive Interrupt Register */ +#define msvr1 0x6c /* Modem Signal Value Register 1 */ +#define msvr2 0x6d /* Modem Signal Value Register 2*/ +#define psvr 0x6f /* Printer Signal Value Register*/ + +#define tbpr 0x72 /* Transmit Baud Rate Period Register */ +#define tcor 0x76 /* Transmit Clock Option Register */ + +#define rbpr 0x78 /* Receive Baud Rate Period Register */ +#define rber 0x7a /* Receive Baud Rate Extension Register */ +#define rcor 0x7c /* Receive Clock Option Register*/ +#define ppr 0x7e /* Prescalar Period Register */ + +/* Misc registers used for forcing the 1400 out of its reset woes */ +#define airl 0x6d +#define airm 0x6e +#define airh 0x6f +#define btcr 0x66 +#define mtcr 0x6c +#define tber 0x74 + +#endif /* #ifdef RTA */ + + +/* Bit fields for particular registers */ + +/* GCR */ +#define GCR_SERIAL 0x00 /* Configure as serial channel */ +#define GCR_PARALLEL 0x80 /* Configure as parallel channel */ + +/* RDSR - when status read from FIFO */ +#define RDSR_BREAK 0x08 /* Break received */ +#define RDSR_TIMEOUT 0x80 /* No new data timeout */ +#define RDSR_SC1 0x10 /* Special char 1 (tx XON) matched */ +#define RDSR_SC2 0x20 /* Special char 2 (tx XOFF) matched */ +#define RDSR_SC12_MASK 0x30 /* Mask for special chars 1 and 2 */ + +/* PPR */ +#define PPR_DEFAULT 0x31 /* Default value - for a 25Mhz clock gives + a timeout period of 1ms */ + +/* LIVR */ +#define LIVR_EXCEPTION 0x07 /* Receive exception interrupt */ + +/* CCR */ +#define CCR_RESET 0x80 /* Reset channel */ +#define CCR_CHANGE 0x4e /* COR's have changed - NB always change all + COR's */ +#define CCR_WFLUSH 0x82 /* Flush transmit FIFO and TSR / THR */ + +#define CCR_SENDSC1 0x21 /* Send special character one */ +#define CCR_SENDSC2 0x22 /* Send special character two */ +#define CCR_SENDSC3 0x23 /* Send special character three */ +#define CCR_SENDSC4 0x24 /* Send special character four */ + +#define CCR_TENABLE 0x18 /* Enable transmitter */ +#define CCR_TDISABLE 0x14 /* Disable transmitter */ +#define CCR_RENABLE 0x12 /* Enable receiver */ +#define CCR_RDISABLE 0x11 /* Disable receiver */ + +#define CCR_READY 0x00 /* CCR is ready for another command */ + +/* CCSR */ +#define CCSR_TXENABLE 0x08 /* Transmitter enable */ +#define CCSR_RXENABLE 0x80 /* Receiver enable */ +#define CCSR_TXFLOWOFF 0x04 /* Transmit flow off */ +#define CCSR_TXFLOWON 0x02 /* Transmit flow on */ + +/* SVRR */ +#define SVRR_RECEIVE 0x01 /* Receive interrupt pending */ +#define SVRR_TRANSMIT 0x02 /* Transmit interrupt pending */ +#define SVRR_MODEM 0x04 /* Modem interrupt pending */ + +/* CAR */ +#define CAR_PORTS 0x03 /* Bit fields for ports */ + +/* IER */ +#define IER_MODEM 0x80 /* Change in modem status */ +#define IER_RECEIVE 0x10 /* Good data / data exception */ +#define IER_TRANSMITR 0x04 /* Transmit ready (FIFO empty) */ +#define IER_TRANSMITE 0x02 /* Transmit empty */ +#define IER_TIMEOUT 0x01 /* Timeout on no data */ + +#define IER_DEFAULT 0x94 /* Default values */ +#define IER_PARALLEL 0x84 /* Default for Parallel */ +#define IER_EMPTY 0x92 /* Transmitter empty rather than ready */ + +/* COR1 - Driver only */ +#define COR1_INPCK 0x10 /* Check parity of received characters */ + +/* COR1 - driver and RTA */ +#define COR1_ODD 0x80 /* Odd parity */ +#define COR1_EVEN 0x00 /* Even parity */ +#define COR1_NOP 0x00 /* No parity */ +#define COR1_FORCE 0x20 /* Force parity */ +#define COR1_NORMAL 0x40 /* With parity */ +#define COR1_1STOP 0x00 /* 1 stop bit */ +#define COR1_15STOP 0x04 /* 1.5 stop bits */ +#define COR1_2STOP 0x08 /* 2 stop bits */ +#define COR1_5BITS 0x00 /* 5 data bits */ +#define COR1_6BITS 0x01 /* 6 data bits */ +#define COR1_7BITS 0x02 /* 7 data bits */ +#define COR1_8BITS 0x03 /* 8 data bits */ + +#define COR1_HOST 0xef /* Safe host bits */ + +/* RTA only */ +#define COR1_CINPCK 0x00 /* Check parity of received characters */ +#define COR1_CNINPCK 0x10 /* Don't check parity */ + +/* COR2 bits for both RTA and driver use */ +#define COR2_IXANY 0x80 /* IXANY - any character is XON */ +#define COR2_IXON 0x40 /* IXON - enable tx soft flowcontrol */ +#define COR2_RTSFLOW 0x02 /* Enable tx hardware flow control */ + +/* Additional driver bits */ +#define COR2_HUPCL 0x20 /* Hang up on close */ +#define COR2_CTSFLOW 0x04 /* Enable rx hardware flow control */ +#define COR2_IXOFF 0x01 /* Enable rx software flow control */ +#define COR2_DTRFLOW 0x08 /* Enable tx hardware flow control */ + +/* RTA use only */ +#define COR2_ETC 0x20 /* Embedded transmit options */ +#define COR2_LOCAL 0x10 /* Local loopback mode */ +#define COR2_REMOTE 0x08 /* Remote loopback mode */ +#define COR2_HOST 0xc2 /* Safe host bits */ + +/* COR3 - RTA use only */ +#define COR3_SCDRNG 0x80 /* Enable special char detect for range */ +#define COR3_SCD34 0x40 /* Special character detect for SCHR's 3 + 4 */ +#define COR3_FCT 0x20 /* Flow control transparency */ +#define COR3_SCD12 0x10 /* Special character detect for SCHR's 1 + 2 */ +#define COR3_FIFO12 0x0c /* 12 chars for receive FIFO threshold */ +#define COR3_FIFO10 0x0a /* 10 chars for receive FIFO threshold */ +#define COR3_FIFO8 0x08 /* 8 chars for receive FIFO threshold */ +#define COR3_FIFO6 0x06 /* 6 chars for receive FIFO threshold */ + +#define COR3_THRESHOLD COR3_FIFO8 /* MUST BE LESS THAN MCOR_THRESHOLD */ + +#define COR3_DEFAULT (COR3_FCT | COR3_THRESHOLD) + /* Default bits for COR3 */ + +/* COR4 driver and RTA use */ +#define COR4_IGNCR 0x80 /* Throw away CR's on input */ +#define COR4_ICRNL 0x40 /* Map CR -> NL on input */ +#define COR4_INLCR 0x20 /* Map NL -> CR on input */ +#define COR4_IGNBRK 0x10 /* Ignore Break */ +#define COR4_NBRKINT 0x08 /* No interrupt on break (-BRKINT) */ +#define COR4_RAISEMOD 0x01 /* Raise modem output lines on non-zero baud */ + + +/* COR4 driver only */ +#define COR4_IGNPAR 0x04 /* IGNPAR (ignore characters with errors) */ +#define COR4_PARMRK 0x02 /* PARMRK */ + +#define COR4_HOST 0xf8 /* Safe host bits */ + +/* COR4 RTA only */ +#define COR4_CIGNPAR 0x02 /* Thrown away bad characters */ +#define COR4_CPARMRK 0x04 /* PARMRK characters */ +#define COR4_CNPARMRK 0x03 /* Don't PARMRK */ + +/* COR5 driver and RTA use */ +#define COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */ +#define COR5_LNE 0x40 /* Enable LNEXT processing */ +#define COR5_CMOE 0x20 /* Match good and errored characters */ +#define COR5_ONLCR 0x02 /* NL -> CR NL on output */ +#define COR5_OCRNL 0x01 /* CR -> NL on output */ + +/* +** Spare bits - these are not used in the CIRRUS registers, so we use +** them to set various other features. +*/ +/* +** tstop and tbusy indication +*/ +#define COR5_TSTATE_ON 0x08 /* Turn on monitoring of tbusy and tstop */ +#define COR5_TSTATE_OFF 0x04 /* Turn off monitoring of tbusy and tstop */ +/* +** TAB3 +*/ +#define COR5_TAB3 0x10 /* TAB3 mode */ + +#define COR5_HOST 0xc3 /* Safe host bits */ + +/* CCSR */ +#define CCSR_TXFLOFF 0x04 /* Tx is xoffed */ + +/* MSVR1 */ +/* NB. DTR / CD swapped from Cirrus spec as the pins are also reversed on the + RTA. This is because otherwise DCD would get lost on the 1 parallel / 3 + serial option. +*/ +#define MSVR1_CD 0x80 /* CD (DSR on Cirrus) */ +#define MSVR1_RTS 0x40 /* RTS (CTS on Cirrus) */ +#define MSVR1_RI 0x20 /* RI */ +#define MSVR1_DTR 0x10 /* DTR (CD on Cirrus) */ +#define MSVR1_CTS 0x01 /* CTS output pin (RTS on Cirrus) */ +/* Next two used to indicate state of tbusy and tstop to driver */ +#define MSVR1_TSTOP 0x08 /* Set if port flow controlled */ +#define MSVR1_TEMPTY 0x04 /* Set if port tx buffer empty */ + +#define MSVR1_HOST 0xf3 /* The bits the host wants */ + +/* MSVR2 */ +#define MSVR2_DSR 0x02 /* DSR output pin (DTR on Cirrus) */ + +/* MCOR */ +#define MCOR_CD 0x80 /* CD (DSR on Cirrus) */ +#define MCOR_RTS 0x40 /* RTS (CTS on Cirrus) */ +#define MCOR_RI 0x20 /* RI */ +#define MCOR_DTR 0x10 /* DTR (CD on Cirrus) */ + +#define MCOR_DEFAULT (MCOR_CD | MCOR_RTS | MCOR_RI | MCOR_DTR) +#define MCOR_FULLMODEM MCOR_DEFAULT +#define MCOR_RJ45 (MCOR_CD | MCOR_RTS | MCOR_DTR) +#define MCOR_RESTRICTED (MCOR_CD | MCOR_RTS) + +/* More MCOR - H/W Handshake (flowcontrol) stuff */ +#define MCOR_THRESH8 0x08 /* eight characters then we stop */ +#define MCOR_THRESH9 0x09 /* nine characters then we stop */ +#define MCOR_THRESH10 0x0A /* ten characters then we stop */ +#define MCOR_THRESH11 0x0B /* eleven characters then we stop */ + +#define MCOR_THRESHBITS 0x0F /* mask for ANDing out the above */ + +#define MCOR_THRESHOLD MCOR_THRESH9 /* MUST BE GREATER THAN COR3_THRESHOLD */ + + +/* RTPR */ +#define RTPR_DEFAULT 0x02 /* Default */ + + +/* Defines for the subscripts of a CONFIG packet */ +#define CONFIG_COR1 1 /* Option register 1 */ +#define CONFIG_COR2 2 /* Option register 2 */ +#define CONFIG_COR4 3 /* Option register 4 */ +#define CONFIG_COR5 4 /* Option register 5 */ +#define CONFIG_TXXON 5 /* Tx XON character */ +#define CONFIG_TXXOFF 6 /* Tx XOFF character */ +#define CONFIG_RXXON 7 /* Rx XON character */ +#define CONFIG_RXXOFF 8 /* Rx XOFF character */ +#define CONFIG_LNEXT 9 /* LNEXT character */ +#define CONFIG_TXBAUD 10 /* Tx baud rate */ +#define CONFIG_RXBAUD 11 /* Rx baud rate */ + +/* Port status stuff */ +#define IDLE_CLOSED 0 /* Closed */ +#define IDLE_OPEN 1 /* Idle open */ +#define IDLE_BREAK 2 /* Idle on break */ + +/* Subscript of MODEM STATUS packet */ +#define MODEM_VALUE 3 /* Current values of handshake pins */ +/* Subscript of SBREAK packet */ +#define BREAK_LENGTH 1 /* Length of a break in slices of 0.01 seconds + 0 = stay on break until an EBREAK command + is sent */ + + +#define PRE_EMPTIVE 0x80 /* Pre-emptive bit in command field */ + +/* Packet types going from Host to remote - with the exception of OPEN, MOPEN, + CONFIG, SBREAK and MEMDUMP the remaining bytes of the data array will not + be used +*/ +#define OPEN 0x00 /* Open a port */ +#define CONFIG 0x01 /* Configure a port */ +#define MOPEN 0x02 /* Modem open (block for DCD) */ +#define CLOSE 0x03 /* Close a port */ +#define WFLUSH (0x04 | PRE_EMPTIVE) /* Write flush */ +#define RFLUSH (0x05 | PRE_EMPTIVE) /* Read flush */ +#define RESUME (0x06 | PRE_EMPTIVE) /* Resume if xoffed */ +#define SBREAK 0x07 /* Start break */ +#define EBREAK 0x08 /* End break */ +#define SUSPEND (0x09 | PRE_EMPTIVE) /* Susp op (behave as tho xoffed) */ +#define FCLOSE (0x0a | PRE_EMPTIVE) /* Force close */ +#define XPRINT 0x0b /* Xprint packet */ +#define MBIS (0x0c | PRE_EMPTIVE) /* Set modem lines */ +#define MBIC (0x0d | PRE_EMPTIVE) /* Clear modem lines */ +#define MSET (0x0e | PRE_EMPTIVE) /* Set modem lines */ +#define PCLOSE 0x0f /* Pseudo close - Leaves rx/tx enabled */ +#define MGET (0x10 | PRE_EMPTIVE) /* Force update of modem status */ +#define MEMDUMP (0x11 | PRE_EMPTIVE) /* Send back mem from addr supplied */ +#define READ_REGISTER (0x12 | PRE_EMPTIVE) /* Read CD1400 register (debug) */ + +/* "Command" packets going from remote to host COMPLETE and MODEM_STATUS + use data[4] / data[3] to indicate current state and modem status respectively +*/ + +#define COMPLETE (0x20 | PRE_EMPTIVE) + /* Command complete */ +#define BREAK_RECEIVED (0x21 | PRE_EMPTIVE) + /* Break received */ +#define MODEM_STATUS (0x22 | PRE_EMPTIVE) + /* Change in modem status */ + +/* "Command" packet that could go either way - handshake wake-up */ +#define HANDSHAKE (0x23 | PRE_EMPTIVE) + /* Wake-up to HOST / RTA */ + +#endif -- cgit v1.2.2