aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/genet
Commit message (Collapse)AuthorAge
* net: bcmgenet: remove bcmgenet_internal_phy_setup()Doug Berger2017-03-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 31739eae738ccbe8b9d627c3f2251017ca03f4d2 ] Commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") removed the bcmgenet_mii_reset() function from bcmgenet_power_up() and bcmgenet_internal_phy_setup() functions. In so doing it broke the reset of the internal PHY devices used by the GENETv1-GENETv3 which required this reset before the UniMAC was enabled. It also broke the internal GPHY devices used by the GENETv4 because the config_init that installed the AFE workaround was no longer occurring after the reset of the GPHY performed by bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). In addition the code in bcmgenet_internal_phy_setup() related to the "enable APD" comment goes with the bcmgenet_mii_reset() so it should have also been removed. Commit bd4060a6108b ("net: bcmgenet: Power on integrated GPHY in bcmgenet_power_up()") moved the bcmgenet_phy_power_set() call to the bcmgenet_power_up() function, but failed to remove it from the bcmgenet_internal_phy_setup() function. Had it done so, the bcmgenet_internal_phy_setup() function would have been empty and could have been removed at that time. Commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") was submitted to correct the functional problems introduced by commit 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset"). It was included in v4.4 and made available on 4.3-stable. Unfortunately, it didn't fully revert the commit because this bcmgenet_mii_reset() doesn't apply the soft reset to the internal GPHY used by GENETv4 like the previous one did. This prevents the restoration of the AFE work- arounds for internal GPHY devices after the bcmgenet_phy_power_set() in bcmgenet_internal_phy_setup(). This commit takes the alternate approach of removing the unnecessary bcmgenet_internal_phy_setup() function which shouldn't have been in v4.3 so that when bcmgenet_mii_reset() was restored it should have only gone into bcmgenet_power_up(). This will avoid the problems while also removing the redundancy (and hopefully some of the confusion). Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Doug Berger <opendmb@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: bcmgenet: Do not suspend PHY if Wake-on-LAN is enabledFlorian Fainelli2017-03-30
| | | | | | | | | | | | [ Upstream commit 5371bbf4b295eea334ed453efa286afa2c3ccff3 ] Suspending the PHY would be putting it in a low power state where it may no longer allow us to do Wake-on-LAN. Fixes: cc013fb48898 ("net: bcmgenet: correctly suspend and resume PHY device") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: bcmgenet: Utilize correct struct device for all DMA operationsFlorian Fainelli2016-12-02
| | | | | | | | | | | | __bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the same struct device during unmap that was used for the map operation, which makes DMA-API debugging warn about it. Fix this by always using &priv->pdev->dev throughout the driver, using an identical device reference for all map/unmap calls. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: bcmgenet: fix fixed-link phydev leaksJohan Hovold2016-11-29
| | | | | | | | | | | | Make sure to deregister and free any fixed-link PHY registered using of_phy_register_fixed_link() on probe errors and on driver unbind. Note that we're still leaking any fixed-link PHY registered in the non-OF probe path. Fixes: 9abf0c2b717a ("net: bcmgenet: use the new fixed PHY helpers") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: fix phydev reference leakJohan Hovold2016-11-27
| | | | | | | | | | Make sure to drop the reference taken by of_phy_find_device() when initialising MOCA PHYs. Fixes: 6ac9de5f6563 ("net: bcmgenet: Register link_update callback for all MoCA PHYs") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-09-27
| | | | | | | | The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: ethernet: bcmgenet: use phydev from struct net_device"Florian Fainelli2016-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device") because it causes GENETv1/2/3 adapters to expose the following behavior after an ifconfig down/up sequence: PING fainelli-linux (10.112.156.244): 56 data bytes 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!) 64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!) This was previously fixed by commit 5dbebbb44a6a ("net: bcmgenet: Software reset EPHY after power on") but the commit we are reverting was essentially making this previous commit void, here is why. Without commit 62469c76007e we would have the following scenario after an ifconfig down then up sequence: - bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is initialized *before* we get to initialize the UniMAC, this is critical to ensure the PHY is in a correct state, priv->phydev is valid, this code executes fine - second time from bcmgenet_mii_probe(), through the normal phy_init_hw() call (which arguably could be optimized out) Everything is fine in that case. With commit 62469c76007e, we would have the following scenario to happen after an ifconfig down then up sequence: - bcmgenet_close() calls phy_disonnect() which makes dev->phydev become NULL - when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from bcmgenet_power_up() to initialize the internal PHY, the NULL check becomes true, so we do not reset the PHY, yet we keep going on and initialize the UniMAC, causing MAC activity to occur - we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is too late, the PHY is botched, and causes the above bogus pings/packets transmission/reception to occur Reported-by: Jaedon Shin <jaedon.shin@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: ethernet: bcmgenet: use new api ethtool_{get|set}_link_ksettings"Philippe Reynes2016-09-27
| | | | | | | | | | | | | | This reverts commit 6b352ebccbcf ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings"). We needs to revert the commit 62469c76007e ("net: ethernet: bcmgenet: use phydev from struct net_device"), because this commit add a regression. As the commit 6b352ebccbcf ("net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettings") depend on the first one, we also need to revert it first. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: remove unused function in bcmgenet.cBaoyou Xie2016-09-26
| | | | | | | | | | | | | | We get 1 warning when building kernel with W=1: drivers/net/ethernet/broadcom/genet/bcmgenet.c:2763:5: warning: no previous prototype for 'bcmgenet_hfb_add_filter' [-Wmissing-prototypes] In fact, this function is implemented in drivers/net/ethernet/broadcom/genet/bcmgenet.c, but be called by no one, thus can be removed. So this patch removes the unused functions. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: broadcom: bcmgenet: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-09-19
| | | | | | | | The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: constify ethtool_ops structuresJulia Lawall2016-08-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check for ethtool_ops structures that are only stored in the ethtool_ops field of a net_device structure or passed as the second argument to netdev_set_default_ethtool_ops. These contexts are declared const, so ethtool_ops structures that have these properties can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct ethtool_ops i@p = { ... }; @ok1@ identifier r.i; struct net_device e; position p; @@ e.ethtool_ops = &i@p; @ok2@ identifier r.i; expression e; position p; @@ netdev_set_default_ethtool_ops(e, &i@p) @bad@ position p != {r.p,ok1.p,ok2.p}; identifier r.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct ethtool_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings"Philippe Reynes2016-07-11
| | | | | | | | | | | | | | | | | This reverts commit 4386f5662e63 ("net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettings") This patch is wrong, the function phy_ethtool_{get|set}_link_ksettings don't check if the device is running, but the driver bcmgenet need this check. The function {get|set}_settings need to access the mdio bus, and this bus may only be used when the device is running. Otherwise, the clock is disable and a mdio access will fail. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: bcmgenet: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes2016-07-04
| | | | | | | | There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: bcmgenet: use phydev from struct net_devicePhilippe Reynes2016-07-04
| | | | | | | | | | The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: replace dev->trans_start update with helperFlorian Westphal2016-05-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2016-04-23
|\ | | | | | | | | | | | | | | | | | | | | Conflicts were two cases of simple overlapping changes, nothing serious. In the UDP case, we need to add a hlist_add_tail_rcu() to linux/rculist.h, because we've moved UDP socket handling away from using nulls lists. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bcmgenet: device stats are unsigned longEric Dumazet2016-04-16
| | | | | | | | | | | | | | | | | | On 64bit kernels, device stats are 64bit wide, not 32bit. Fixes: 1c1008c793fa4 ("net: bcmgenet: add main driver file") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: add BQL supportPetri Gynther2016-04-14
| | | | | | | | | | | | | | Add Byte Queue Limits (BQL) support to bcmgenet driver. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: use __napi_schedule_irqoff()Florian Fainelli2016-04-13
| | | | | | | | | | | | | | | | | | | | bcmgenet_isr1() and bcmgenet_isr0() run in hard irq context, we do not need to block irq again. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: use napi_complete_done()Eric Dumazet2016-04-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By using napi_complete_done(), we allow fine tuning of /sys/class/net/ethX/gro_flush_timeout for higher GRO aggregation efficiency for a Gbit NIC. Check commit 24d2e4a50737 ("tg3: use napi_complete_done()") for details. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Petri Gynther <pgynther@google.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: cleanup for dmadesc_set()Petri Gynther2016-04-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dmadesc_set() is used for setting the Tx buffer DMA address, length, and status bits on a Tx ring descriptor when a frame is being Tx'ed. Always set the Tx buffer DMA address first, before updating the length and status bits, i.e. giving the Tx descriptor to the hardware. The reason this is a cleanup rather than a fix is that the hardware won't transmit anything from a Tx ring until the TDMA producer index has been incremented. As long as the dmadesc_set() writes complete before the TDMA producer index write, life is good. Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: cleanup for bcmgenet_xmit_frag()Petri Gynther2016-04-05
| | | | | | | | | | | | | | | | Add frag_size = skb_frag_size(frag) and use it when needed. Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: cleanup for bcmgenet_xmit()Petri Gynther2016-04-05
|/ | | | | | | | | | | | 1. Readability: Move nr_frags assignment a few lines down in order to bundle index -> ring -> txq calculations together. 2. Readability: Add parentheses around nr_frags + 1. 3. Minor fix: Stop the Tx queue and throw the error message only if the Tx queue hasn't already been stopped. Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: fix skb_len in bcmgenet_xmit_single()Petri Gynther2016-03-24
| | | | | | | | | | | | | | | | | | | | | | skb_len needs to be skb_headlen(skb) in bcmgenet_xmit_single(). Fragmented skbs can have only Ethernet + IP + TCP headers (14+20+20=54 bytes) in the linear buffer, followed by the rest in fragments. Bumping skb_len to ETH_ZLEN would be incorrect for this case, as it would introduce garbage between TCP header and the fragment data. This also works with regular/non-fragmented small packets < ETH_ZLEN bytes. Successfully tested this on GENETv3 with 42-byte ARP frames. For testing, I used: ethtool -K eth0 tx-checksum-ipv4 off ethtool -K eth0 tx-checksum-ipv6 off echo 0 > /proc/sys/net/ipv4/tcp_timestamps Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Petri Gynther <pgynther@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: fix dev->stats.tx_bytes accountingPetri Gynther2016-03-24
| | | | | | | | | | | | | | | | | | 1. Add bytes_compl local variable to __bcmgenet_tx_reclaim() to collect transmitted bytes. dev->stats updates can then be moved outside the while-loop. bytes_compl is also needed for future BQL support. 2. When bcmgenet device uses Tx checksum offload, each transmitted skb gets an extra 64-byte header prepended to it. Before this header is prepended to the skb, we need to save the skb "wire" length in GENET_CB(skb)->bytes_sent, so that proper Tx bytes accounting can be done in __bcmgenet_tx_reclaim(). 3. skb->len covers the entire length of skb, whether it is linear or fragmented. Thus, when we clean the fragments, do not increase transmitted bytes. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: fix dma api length mismatchEric Dumazet2016-03-18
| | | | | | | | | | | | | | When un-mapping skb->data in __bcmgenet_tx_reclaim(), we must use the length that was used in original dma_map_single(), instead of skb->len that might be bigger (includes the frags) We simply can store skb_len into tx_cb_ptr->dma_len and use it at unmap time. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: Fix internal PHY link stateJaedon Shin2016-02-19
| | | | | | | | | | | | | | | | The PHY link state is not chaged in GENETv2 caused by the previous commit 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore interrupt") was set to PHY_IGNORE_INTERRUPT in bcmgenet_mii_probe(). The internal PHY should use phy_mac_interrupt() when not in use PHY_POLL. The statement for phy_mac_interrupt() has two conditions. The first condition to check GENET_HAS_MDIO_INTR is not related PHY link state, so this patch removes it. Fixes: 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore interrupt") Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: Properly configure PHY to ignore interruptFlorian Fainelli2016-01-21
| | | | | | | | | | | | | | | By the time we execute bcmgenet_mii_probe(), the MDIO bus structure has long been allocated and registered. Overirring the PHY interrupt using the MDIO bus structure has no chance to work anymore, because of_mdiobus_register() has call phy_device_create() for use, which copied the MDIO bus address's irq for the PHY into the PHY device "irq" member. Since we do have a proper reference to a PHY device in bcmgenet_mii_probe(), just assign the desired IRQ value here. Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add API for {un}registering an mdio device to a bus.Andrew Lunn2016-01-07
| | | | | | | | | | Rather than have drivers directly manipulate the mii_bus structure, provide and API for registering and unregistering devices on an MDIO bus, and performing lookups. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: Add an mdio_device structureAndrew Lunn2016-01-07
| | | | | | | | | Not all devices attached to an MDIO bus are phys. So add an mdio_device structure to represent the generic parts of an mdio device, and place this structure into the phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio: Move allocation of interrupts into coreAndrew Lunn2016-01-07
| | | | | | | | | | Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: add netif_tx_napi_add()Eric Dumazet2015-11-18
| | | | | | | | | | | | | netif_tx_napi_add() is a variant of netif_napi_add() It should be used by drivers that use a napi structure to exclusively poll TX. We do not want to add this kind of napi in napi_hash[] in following patches, adding generic busy polling to all NAPI drivers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-11-03
|\ | | | | | | | | | | | | | | Minor overlapping changes in net/ipv4/ipmr.c, in 'net' we were fixing the "BH-ness" of the counter bumps whilst in 'net-next' the functions were modified to take an explicit 'net' parameter. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bcmgenet: Software reset EPHY after power onFlorian Fainelli2015-11-01
| | | | | | | | | | | | | | | | | | | | | | | | | | The EPHY on GENET v1->v3 is extremely finicky, and will show occasional failures based on the timing and reset sequence, ranging from duplicate packets, to extremely high latencies. Perform an additional software reset, and re-configuration to make sure it is in a consistent and working state. Fixes: 6ac3ce8295e6 ("net: bcmgenet: Remove excessive PHY reset") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-10-20
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bcmgenet: Fix early link interrupt enablingFlorian Fainelli2015-10-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Link interrupts are enabled in init_umac(), which is too early for us to process them since we do not yet have a valid PHY device pointer. On BCM7425 chips for instance, we will crash calling phy_mac_interrupt() because phydev is NULL. Fix this by moving the link interrupts enabling in bcmgenet_netif_start(), under a specific function: bcmgenet_link_intr_enable() and while at it, update the comments surrounding the code. Fixes: 6cc8e6d4dcb36 ("net: bcmgenet: Delay PHY initialization to bcmgenet_open()") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera2015-10-16
| | | | | | | | | | | | | | | | | | | | | | | | Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-09-26
|\| | | | | | | | | | | | | | | | | | | Conflicts: net/ipv4/arp.c The net/ipv4/arp.c conflict was one commit adding a new local variable while another commit was deleting one. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bcmgenet: Fix module autoload for OF platform driverLuis de Bethencourt2015-09-21
| | | | | | | | | | | | | | | | | | This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luis@osg.samsung.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: Remove duplicate test for tx_coalesce_usecs_highFlorian Fainelli2015-09-21
| | | | | | | | | | | | | | | | | | | | | | We were checking twice for ec->tx_coalesce_usecs_high, remove the duplicate test. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Reported-by: kbuild-all@01.org Fixes: 2f9130709d2c19 ("net: bcmgenet: Implement TX coalescing control knobs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: Implement RX coalescing control knobsFlorian Fainelli2015-09-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the ethtool rx-frames coalescing parameter which allows defining the number of RX interrupts per frames received. The RDMA engine supports a configurable timeout with a resolution of approximately 8.192 us. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: Implement TX coalescing control knobsFlorian Fainelli2015-09-18
|/ | | | | | | | | | | | | | | | | | | | | | | | | | Configuring the ethtool tx-frames property, which translates into N packets before a TX interrupt is the simplest configuration scheme because it requires no locking neither at the softare nor hardware level, and is completely indepedent from the link speed. Since ethtool does not allow per-tx queue coalescing parameters, we apply the same setting to any transmit queue. We can no longer enable the BDONE/PDONE interrupts as those would fire for each packet/buffer received, which would defeat the MBDONE interrupt purpose. The MBDONE interrupt is guaranteed to correspond to a PDONE/BDONE interrupt when the threshold is set to 1, but offers interrupt coalescing when the value is > 1. Since the HW is configured to generate an interrupt when the ring becomes emtpy, we have to deny any timeout/timer settings coming from user-space to indicate we can only generate an interrupt very <N> packets. While we are at it, fix the DMA_INTR_THRESHOLD_MASK value which was off by one bit (0xff vs. 0x1ff). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* phy: fixed_phy: Add gpio to determine link up/down.Andrew Lunn2015-08-31
| | | | | | | | | | An SFP module may have a link up/down status pin which can be connection to a GPIO line of the host. Add support for reading such an GPIO in the fixed_phy driver. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-08-28
|\
| * net: bcmgenet: fix uncleaned dma flagsJaedon Shin2015-08-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean the dma flags of multiq ring buffer int the interface stop process. This patch fixes that the genet is not running while the interface is re-enabled. $ ifup eth0 - running after booting $ ifdown eth0 $ ifup eth0 - not running and occur tx_timeout The bcmgenet_dma_disable() in bcmgenet_open() do clean ring16 dma flag only. If the genet has multiq, the dma register is not cleaned. and bcmgenet_init_dma() is not done correctly. in case GENET_V2(tx_queues=4), tdma_ctrl has 0x1e after running bcmgenet_dma_disable(). Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: bcmgenet: Avoid sleeping in bcmgenet_timeoutFlorian Fainelli2015-08-24
| | | | | | | | | | | | | | | | | | | | | | bcmgenet_timeout() executes in atomic context, yet we will invoke napi_disable() which does sleep. Looking back at the changes, disabling TX napi and re-enabling it is completely useless, since we reclaim all TX buffers and re-enable interrupts, and wake up the TX queues. Fixes: 13ea657806cf ("net: bcmgenet: improve TX timeout") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: Add netconsole supportFlorian Fainelli2015-07-31
| | | | | | | | | | | | | | | | Implement a poll controller for netconsole which invokes both of our interrupt handlers for the different RX/TX queues. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: Register link_update callback for all MoCA PHYsFlorian Fainelli2015-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8d88c6ebb34c ("net: bcmgenet: enable MoCA link state change detection") added a fixed PHY link_update callback for MoCA PHYs when registered using platform_data exclusively, this change is also applicable to systems using Device Tree as their primary configuration interface. In order for this to work, move the link_update assignment into bcmgenet_moca_phy_setup() where we know for sure that we are running on a MoCA GENET instance, and do not override phydev->link since this is: - properly taken care of by the PHY library by getting the link UP/DOWN interrupts - this now runs everytime we call bcmgenet_open(), so we need to preserve whatever we detected before we went administratively DOWN and then UP - we need to make sure that MoCA PHYs start with a link DOWN during probe in order to force a link transition to occur To avoid a forward declaration, move bcmgenet_fixed_phy_link_update() above its caller. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: Remove checks on clock handlesFlorian Fainelli2015-07-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of multiplying the number of checks for IS_ERR(priv->clk), simply NULLify the 'struct clk' pointer which is something the Linux common clock framework perfectly deals with and does early return for each and every single clk_* API functions. Having every single function check for !IS_ERR(priv->clk) is both redundant and error prone, as it turns out, we were doing it for the main GENET clock: priv->clk, but not for the Wake-on-LAN or EEE clock, so let's just be consistent here. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: bcmgenet: Remove init parameter from bcmgenet_mii_configFlorian Fainelli2015-07-20
| | | | | | | | | | | | | | | | | | Now that we have reworked the way we perform the PHY initialization, we no longer need to differentiate between init time vs. non-init time calls, just use a dev_info_once() print to print the PHY type. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-04-11 11:55:30 -0400