1 files changed, 25 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
index 5d2e840ae65c..52464918cfe2 100644
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -6,12 +6,34 @@ Required properties:
 - interrupts: exactly one interrupt specifier
 
 Optional properties:
-- pinctrl: When present, must have one state named "sleep"
-           and one state named "default"
-- clocks:  When present, must refer to exactly one clock named
+- pinctrl: When present, must have one state named "default",
+           and may contain a second name named "sleep". The former
+           state sets up pins for ordinary operation whereas
+           the latter state will put the associated pins to sleep
+           when the UART is unused
+- clocks:  When present, the first clock listed must correspond to
+           the clock named UARTCLK on the IP block, i.e. the clock
+           to the external serial line, whereas the second clock
+           must correspond to the PCLK clocking the internal logic
+           of the block. Just listing one clock (the first one) is
+           deprecated.
+- clocks-names: When present, the first clock listed must be named
+           "uartclk" and the second clock listed must be named
            "apb_pclk"
 - dmas:    When present, may have one or two dma channels.
            The first one must be named "rx", the second one
            must be named "tx".
 
 See also bindings/arm/primecell.txt
+
+Example:
+
+uart@80120000 {
+        compatible = "arm,pl011", "arm,primecell";
+        reg = <0x80120000 0x1000>;
+        interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
+        dmas = <&dma 13 0 0x2>, <&dma 13 0 0x0>;
+        dma-names = "rx", "tx";
+        clocks = <&foo_clk>, <&bar_clk>;
+        clock-names = "uartclk", "apb_pclk";
+};