Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Here are a bunch of small bug fixes for various ARM platforms, nothing
  really sticks out this week, most of either fixes bugs in code that
  was just added in 4.4, or that has been broken for many years without
  anyone noticing.

  at91/sama5d2:
   - fix sama5de hardware setup of sd/mmc interface
   - proper selection of pinctrl drivers.  PIO4 is necessary for sama5d2

  berlin:
   - fix incorrect clock input for SDIO

  exynos:
   - Fix potential NULL pointer dereference in Exynos PMU driver.

  imx:
   - Fix vf610 SAI clock configuration bug which is discovered by the
     newly added master mode support in SAI audio driver.
   - Fix buggy L2 cache latency values in vf610 device trees, which may
     cause system hang when cpu runs at a higher frequency.

  ixp4xx:
   - fix prototypes for readl/writel functions

  ls2080a:
   - use little-endian register access for GPIO and SDHCI

  omap:
   - Fix clock source for ARM TWD and global timers on am437x
   - Always select REGULATOR_FIXED_VOLTAGE for omap2+ instead of when
     MACH_OMAP3_PANDORA is selected
   - Fix SPI DMA handles for dm816x as only some were mapped
   - Fix up mbox cells for dm816x to make mailbox usable

  pxa:
   - use PWM lookup table for all ezx machines

  s3c24xx:
   - Remove incorrect __init annotation from s3c24xx cpufreq driver
     structures.

  versatile:
   - fix PCI IRQ mapping on Versatile PB"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ls2080a/dts: Add little endian property for GPIO IP block
  dt-bindings: define little-endian property for QorIQ GPIO
  ARM64: dts: ls2080a: fix eSDHC endianness
  ARM: dts: vf610: use reset values for L2 cache latencies
  ARM: pxa: use PWM lookup table for all machines
  ARM: dts: berlin: add 2nd clock for BG2Q sdhci0 and sdhci1
  ARM: dts: berlin: correct BG2Q's sdhci2 2nd clock
  ARM: dts: am4372: fix clock source for arm twd and global timers
  ARM: at91: fix pinctrl driver selection
  ARM: at91/dt: add always-on to 1.8V regulator
  ARM: dts: vf610: fix clock definition for SAI2
  ARM: imx: clk-vf610: fix SAI clock tree
  ARM: ixp4xx: fix read{b,w,l} return types
  irqchip/versatile-fpga: Fix PCI IRQ mapping on Versatile PB
  ARM: OMAP2+: enable REGULATOR_FIXED_VOLTAGE
  ARM: dts: add dm816x missing spi DT dma handles
  ARM: dts: add dm816x missing #mbox-cells
  cpufreq: s3c24xx: Do not mark s3c2410_plls_add as __init
  ARM: EXYNOS: Fix potential NULL pointer access in exynos_sys_powerdown_conf

21 files changed, 76 insertions, 32 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
index f2455c50533d..120bc4971cf3 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt
@@ -11,6 +11,10 @@ Required properties:
       0 = active high
       1 = active low
 
+Optional properties:
+- little-endian : GPIO registers are used as little endian. If not
+                  present registers are used as big endian by default.
+
 Example:
 
 gpio0: gpio@1100 {
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index d83ff9c9701e..de8791a4d131 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -74,7 +74,7 @@
                 reg = <0x48240200 0x100>;
                 interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
                 interrupt-parent = <&gic>;
-                clocks = <&dpll_mpu_m2_ck>;
+                clocks = <&mpu_periphclk>;
         };
 
         local_timer: timer@48240600 {
@@ -82,7 +82,7 @@
                 reg = <0x48240600 0x100>;
                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
                 interrupt-parent = <&gic>;
-                clocks = <&dpll_mpu_m2_ck>;
+                clocks = <&mpu_periphclk>;
         };
 
         l2-cache-controller@48242000 {
diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
index cc88728d751d..a38af2bfbfcf 100644
--- a/arch/arm/boot/dts/am43xx-clocks.dtsi
+++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
@@ -259,6 +259,14 @@
                 ti,invert-autoidle-bit;
         };
 
+        mpu_periphclk: mpu_periphclk {
+                #clock-cells = <0>;
+                compatible = "fixed-factor-clock";
+                clocks = <&dpll_mpu_m2_ck>;
+                clock-mult = <1>;
+                clock-div = <2>;
+        };
+
         dpll_ddr_ck: dpll_ddr_ck {
                 #clock-cells = <0>;
                 compatible = "ti,am3-dpll-clock";
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index ad6de73ed5a5..e74df327cdd3 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -184,6 +184,7 @@
                                                         regulator-name = "VDD_SDHC_1V8";
                                                         regulator-min-microvolt = <1800000>;
                                                         regulator-max-microvolt = <1800000>;
+                                                        regulator-always-on;
                                                 };
                                         };
                                 };
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 8ea177f375dd..fb1da99996ea 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -118,7 +118,8 @@
                 sdhci0: sdhci@ab0000 {
                         compatible = "mrvl,pxav3-mmc";
                         reg = <0xab0000 0x200>;
-                        clocks = <&chip_clk CLKID_SDIO1XIN>;
+                        clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+                        clock-names = "io", "core";
                         interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
                         status = "disabled";
                 };
@@ -126,7 +127,8 @@
                 sdhci1: sdhci@ab0800 {
                         compatible = "mrvl,pxav3-mmc";
                         reg = <0xab0800 0x200>;
-                        clocks = <&chip_clk CLKID_SDIO1XIN>;
+                        clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
+                        clock-names = "io", "core";
                         interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
                         status = "disabled";
                 };
@@ -135,7 +137,7 @@
                         compatible = "mrvl,pxav3-mmc";
                         reg = <0xab1000 0x200>;
                         interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-                        clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_NFC>;
+                        clocks = <&chip_clk CLKID_NFC_ECC>, <&chip_clk CLKID_SDIO>;
                         clock-names = "io", "core";
                         status = "disabled";
                 };
diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi
index 3c99cfa1a876..eee636de4cd8 100644
--- a/arch/arm/boot/dts/dm816x.dtsi
+++ b/arch/arm/boot/dts/dm816x.dtsi
@@ -218,6 +218,7 @@
                         reg = <0x480c8000 0x2000>;
                         interrupts = <77>;
                         ti,hwmods = "mailbox";
+                        #mbox-cells = <1>;
                         ti,mbox-num-users = <4>;
                         ti,mbox-num-fifos = <12>;
                         mbox_dsp: mbox_dsp {
@@ -279,8 +280,11 @@
                         ti,spi-num-cs = <4>;
                         ti,hwmods = "mcspi1";
                         dmas = <&edma 16 &edma 17
-                                &edma 18 &edma 19>;
-                        dma-names = "tx0", "rx0", "tx1", "rx1";
+                                &edma 18 &edma 19
+                                &edma 20 &edma 21
+                                &edma 22 &edma 23>;
+                        dma-names = "tx0", "rx0", "tx1", "rx1",
+                                    "tx2", "rx2", "tx3", "rx3";
                 };
 
                 mmc1: mmc@48060000 {
diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi
index 19fe045b8334..2d7eab755210 100644
--- a/arch/arm/boot/dts/vf610-colibri.dtsi
+++ b/arch/arm/boot/dts/vf610-colibri.dtsi
@@ -18,8 +18,3 @@
                 reg = <0x80000000 0x10000000>;
         };
 };
-
-&L2 {
-        arm,data-latency = <2 1 2>;
-        arm,tag-latency = <3 2 3>;
-};
diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi
index 5f8eb1bd782b..58bc6e448be5 100644
--- a/arch/arm/boot/dts/vf610.dtsi
+++ b/arch/arm/boot/dts/vf610.dtsi
@@ -19,7 +19,7 @@
                 reg = <0x40006000 0x1000>;
                 cache-unified;
                 cache-level = <2>;
-                arm,data-latency = <1 1 1>;
+                arm,data-latency = <3 3 3>;
                 arm,tag-latency = <2 2 2>;
         };
 };
diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 0d5acc2cdc8e..3cd1b27f2697 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -178,8 +178,10 @@
                                 compatible = "fsl,vf610-sai";
                                 reg = <0x40031000 0x1000>;
                                 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>;
-                                clocks = <&clks VF610_CLK_SAI2>;
-                                clock-names = "sai";
+                                clocks = <&clks VF610_CLK_SAI2>,
+                                        <&clks VF610_CLK_SAI2_DIV>,
+                                        <&clks 0>, <&clks 0>;
+                                clock-names = "bus", "mclk1", "mclk2", "mclk3";
                                 dma-names = "tx", "rx";
                                 dmas = <&edma0 0 21>,
                                         <&edma0 0 20>;
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 92673006e55c..28656c2b54a0 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -4,7 +4,6 @@ menuconfig ARCH_AT91
         select ARCH_REQUIRE_GPIOLIB
         select COMMON_CLK_AT91
         select PINCTRL
-        select PINCTRL_AT91
         select SOC_BUS
 
 if ARCH_AT91
@@ -17,6 +16,7 @@ config SOC_SAMA5D2
         select HAVE_AT91_USB_CLK
         select HAVE_AT91_H32MX
         select HAVE_AT91_GENERATED_CLK
+        select PINCTRL_AT91PIO4
         help
           Select this if ou are using one of Atmel's SAMA5D2 family SoC.
 
@@ -27,6 +27,7 @@ config SOC_SAMA5D3
         select HAVE_AT91_UTMI
         select HAVE_AT91_SMD
         select HAVE_AT91_USB_CLK
+        select PINCTRL_AT91
         help
           Select this if you are using one of Atmel's SAMA5D3 family SoC.
           This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
@@ -40,6 +41,7 @@ config SOC_SAMA5D4
         select HAVE_AT91_SMD
         select HAVE_AT91_USB_CLK
         select HAVE_AT91_H32MX
+        select PINCTRL_AT91
         help
           Select this if you are using one of Atmel's SAMA5D4 family SoC.
 
@@ -50,6 +52,7 @@ config SOC_AT91RM9200
         select CPU_ARM920T
         select HAVE_AT91_USB_CLK
         select MIGHT_HAVE_PCI
+        select PINCTRL_AT91
         select SOC_SAM_V4_V5
         select SRAM if PM
         help
@@ -65,6 +68,7 @@ config SOC_AT91SAM9
         select HAVE_AT91_UTMI
         select HAVE_FB_ATMEL
         select MEMORY
+        select PINCTRL_AT91
         select SOC_SAM_V4_V5
         select SRAM if PM
         help
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 80e277cfcc8b..23726fb31741 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -41,8 +41,10 @@
  * implementation should be moved down into the pinctrl driver and get
  * called as part of the generic suspend/resume path.
  */
+#ifdef CONFIG_PINCTRL_AT91
 extern void at91_pinctrl_gpio_suspend(void);
 extern void at91_pinctrl_gpio_resume(void);
+#endif
 
 static struct {
         unsigned long uhp_udp_mask;
@@ -151,8 +153,9 @@ static void at91_pm_suspend(suspend_state_t state)
 
 static int at91_pm_enter(suspend_state_t state)
 {
+#ifdef CONFIG_PINCTRL_AT91
         at91_pinctrl_gpio_suspend();
-
+#endif
         switch (state) {
         /*
          * Suspend-to-RAM is like STANDBY plus slow clock mode, so
@@ -192,7 +195,9 @@ static int at91_pm_enter(suspend_state_t state)
 error:
         target_state = PM_SUSPEND_ON;
 
+#ifdef CONFIG_PINCTRL_AT91
         at91_pinctrl_gpio_resume();
+#endif
         return 0;
 }
 
diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c
index de68938ee6aa..c21e41dad19c 100644
--- a/arch/arm/mach-exynos/pmu.c
+++ b/arch/arm/mach-exynos/pmu.c
@@ -748,8 +748,12 @@ static void exynos5_powerdown_conf(enum sys_powerdown mode)
 void exynos_sys_powerdown_conf(enum sys_powerdown mode)
 {
         unsigned int i;
+        const struct exynos_pmu_data *pmu_data;
+
+        if (!pmu_context)
+                return;
 
-        const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data;
+        pmu_data = pmu_context->pmu_data;
 
         if (pmu_data->powerdown_conf)
                 pmu_data->powerdown_conf(mode);
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index b02439019963..7a0c13bf4269 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -143,7 +143,7 @@ static inline void __indirect_writesl(volatile void __iomem *bus_addr,
                 writel(*vaddr++, bus_addr);
 }
 
-static inline unsigned char __indirect_readb(const volatile void __iomem *p)
+static inline u8 __indirect_readb(const volatile void __iomem *p)
 {
         u32 addr = (u32)p;
         u32 n, byte_enables, data;
@@ -166,7 +166,7 @@ static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
                 *vaddr++ = readb(bus_addr);
 }
 
-static inline unsigned short __indirect_readw(const volatile void __iomem *p)
+static inline u16 __indirect_readw(const volatile void __iomem *p)
 {
         u32 addr = (u32)p;
         u32 n, byte_enables, data;
@@ -189,7 +189,7 @@ static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
                 *vaddr++ = readw(bus_addr);
 }
 
-static inline unsigned long __indirect_readl(const volatile void __iomem *p)
+static inline u32 __indirect_readl(const volatile void __iomem *p)
 {
         u32 addr = (__force u32)p;
         u32 data;
@@ -350,7 +350,7 @@ static inline void insl(u32 io_addr, void *p, u32 count)
                                         ((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
 
 #define ioread8(p)                      ioread8(p)
-static inline unsigned int ioread8(const void __iomem *addr)
+static inline u8 ioread8(const void __iomem *addr)
 {
         unsigned long port = (unsigned long __force)addr;
         if (__is_io_address(port))
@@ -378,7 +378,7 @@ static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
 }
 
 #define ioread16(p)                     ioread16(p)
-static inline unsigned int ioread16(const void __iomem *addr)
+static inline u16 ioread16(const void __iomem *addr)
 {
         unsigned long port = (unsigned long __force)addr;
         if (__is_io_address(port))
@@ -407,7 +407,7 @@ static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
 }
 
 #define ioread32(p)                     ioread32(p)
-static inline unsigned int ioread32(const void __iomem *addr)
+static inline u32 ioread32(const void __iomem *addr)
 {
         unsigned long port = (unsigned long __force)addr;
         if (__is_io_address(port))
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5076d3f334d2..4b4371db5799 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -121,6 +121,7 @@ config ARCH_OMAP2PLUS_TYPICAL
         select NEON if CPU_V7
         select PM
         select REGULATOR
+        select REGULATOR_FIXED_VOLTAGE
         select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
         select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
         select VFP
@@ -201,7 +202,6 @@ config MACH_OMAP3_PANDORA
         depends on ARCH_OMAP3
         default y
         select OMAP_PACKAGE_CBB
-        select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
 config MACH_NOKIA_N810
        bool
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 9a9c15bfcd34..7c0d5618be5e 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -889,6 +889,7 @@ static void __init e680_init(void)
 
         pxa_set_keypad_info(&e680_keypad_platform_data);
 
+        pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
         platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
         platform_add_devices(ARRAY_AND_SIZE(e680_devices));
 }
@@ -956,6 +957,7 @@ static void __init a1200_init(void)
 
         pxa_set_keypad_info(&a1200_keypad_platform_data);
 
+        pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
         platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
         platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
 }
@@ -1148,6 +1150,7 @@ static void __init a910_init(void)
                 platform_device_register(&a910_camera);
         }
 
+        pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
         platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
         platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
@@ -1215,6 +1218,7 @@ static void __init e6_init(void)
 
         pxa_set_keypad_info(&e6_keypad_platform_data);
 
+        pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
         platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
         platform_add_devices(ARRAY_AND_SIZE(e6_devices));
 }
@@ -1256,6 +1260,7 @@ static void __init e2_init(void)
 
         pxa_set_keypad_info(&e2_keypad_platform_data);
 
+        pwm_add_table(ezx_pwm_lookup, ARRAY_SIZE(ezx_pwm_lookup));
         platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
         platform_add_devices(ARRAY_AND_SIZE(e2_devices));
 }
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
index a19460e6e7b0..b355fca6cc2e 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c
@@ -20,7 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
-static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = {
+static struct cpufreq_frequency_table s3c2440_plls_12[] = {
         { .frequency = 75000000,        .driver_data = PLLVAL(0x75, 3, 3),  },  /* FVco 600.000000 */
         { .frequency = 80000000,        .driver_data = PLLVAL(0x98, 4, 3),  },  /* FVco 640.000000 */
         { .frequency = 90000000,        .driver_data = PLLVAL(0x70, 2, 3),  },  /* FVco 720.000000 */
diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
index 1191b2905625..be9a248b5ce9 100644
--- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
+++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c
@@ -20,7 +20,7 @@
 #include <plat/cpu.h>
 #include <plat/cpu-freq-core.h>
 
-static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = {
+static struct cpufreq_frequency_table s3c2440_plls_169344[] = {
         { .frequency = 78019200,        .driver_data = PLLVAL(121, 5, 3),       },      /* FVco 624.153600 */
         { .frequency = 84067200,        .driver_data = PLLVAL(131, 5, 3),       },      /* FVco 672.537600 */
         { .frequency = 90115200,        .driver_data = PLLVAL(141, 5, 3),       },      /* FVco 720.921600 */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index e81cd48d6245..925552e7b4f3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -269,6 +269,7 @@
                         clock-frequency = <0>;  /* Updated by bootloader */
                         voltage-ranges = <1800 1800 3300 3300>;
                         sdhci,auto-cmd12;
+                        little-endian;
                         bus-width = <4>;
                 };
 
@@ -277,6 +278,7 @@
                         reg = <0x0 0x2300000 0x0 0x10000>;
                         interrupts = <0 36 0x4>; /* Level high type */
                         gpio-controller;
+                        little-endian;
                         #gpio-cells = <2>;
                         interrupt-controller;
                         #interrupt-cells = <2>;
@@ -287,6 +289,7 @@
                         reg = <0x0 0x2310000 0x0 0x10000>;
                         interrupts = <0 36 0x4>; /* Level high type */
                         gpio-controller;
+                        little-endian;
                         #gpio-cells = <2>;
                         interrupt-controller;
                         #interrupt-cells = <2>;
@@ -297,6 +300,7 @@
                         reg = <0x0 0x2320000 0x0 0x10000>;
                         interrupts = <0 37 0x4>; /* Level high type */
                         gpio-controller;
+                        little-endian;
                         #gpio-cells = <2>;
                         interrupt-controller;
                         #interrupt-cells = <2>;
@@ -307,6 +311,7 @@
                         reg = <0x0 0x2330000 0x0 0x10000>;
                         interrupts = <0 37 0x4>; /* Level high type */
                         gpio-controller;
+                        little-endian;
                         #gpio-cells = <2>;
                         interrupt-controller;
                         #interrupt-cells = <2>;
diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index d1b1c95177bb..0a94d9661d91 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -335,22 +335,22 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
         clk[VF610_CLK_SAI0_SEL] = imx_clk_mux("sai0_sel", CCM_CSCMR1, 0, 2, sai_sels, 4);
         clk[VF610_CLK_SAI0_EN] = imx_clk_gate("sai0_en", "sai0_sel", CCM_CSCDR1, 16);
         clk[VF610_CLK_SAI0_DIV] = imx_clk_divider("sai0_div", "sai0_en", CCM_CSCDR1, 0, 4);
-        clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "sai0_div", CCM_CCGR0, CCM_CCGRx_CGn(15));
+        clk[VF610_CLK_SAI0] = imx_clk_gate2("sai0", "ipg_bus", CCM_CCGR0, CCM_CCGRx_CGn(15));
 
         clk[VF610_CLK_SAI1_SEL] = imx_clk_mux("sai1_sel", CCM_CSCMR1, 2, 2, sai_sels, 4);
         clk[VF610_CLK_SAI1_EN] = imx_clk_gate("sai1_en", "sai1_sel", CCM_CSCDR1, 17);
         clk[VF610_CLK_SAI1_DIV] = imx_clk_divider("sai1_div", "sai1_en", CCM_CSCDR1, 4, 4);
-        clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "sai1_div", CCM_CCGR1, CCM_CCGRx_CGn(0));
+        clk[VF610_CLK_SAI1] = imx_clk_gate2("sai1", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(0));
 
         clk[VF610_CLK_SAI2_SEL] = imx_clk_mux("sai2_sel", CCM_CSCMR1, 4, 2, sai_sels, 4);
         clk[VF610_CLK_SAI2_EN] = imx_clk_gate("sai2_en", "sai2_sel", CCM_CSCDR1, 18);
         clk[VF610_CLK_SAI2_DIV] = imx_clk_divider("sai2_div", "sai2_en", CCM_CSCDR1, 8, 4);
-        clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "sai2_div", CCM_CCGR1, CCM_CCGRx_CGn(1));
+        clk[VF610_CLK_SAI2] = imx_clk_gate2("sai2", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(1));
 
         clk[VF610_CLK_SAI3_SEL] = imx_clk_mux("sai3_sel", CCM_CSCMR1, 6, 2, sai_sels, 4);
         clk[VF610_CLK_SAI3_EN] = imx_clk_gate("sai3_en", "sai3_sel", CCM_CSCDR1, 19);
         clk[VF610_CLK_SAI3_DIV] = imx_clk_divider("sai3_div", "sai3_en", CCM_CSCDR1, 12, 4);
-        clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "sai3_div", CCM_CCGR1, CCM_CCGRx_CGn(2));
+        clk[VF610_CLK_SAI3] = imx_clk_gate2("sai3", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(2));
 
         clk[VF610_CLK_NFC_SEL] = imx_clk_mux("nfc_sel", CCM_CSCMR1, 12, 2, nfc_sels, 4);
         clk[VF610_CLK_NFC_EN] = imx_clk_gate("nfc_en", "nfc_sel", CCM_CSCDR2, 9);
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index 733aa5153e74..68ef8fd9482f 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -648,7 +648,7 @@ late_initcall(s3c_cpufreq_initcall);
  *
  * Register the given set of PLLs with the system.
  */
-int __init s3c_plltab_register(struct cpufreq_frequency_table *plls,
+int s3c_plltab_register(struct cpufreq_frequency_table *plls,
                                unsigned int plls_no)
 {
         struct cpufreq_frequency_table *vals;
diff --git a/drivers/irqchip/irq-versatile-fpga.c b/drivers/irqchip/irq-versatile-fpga.c
index 598ab3f0e0ac..cadf104e3074 100644
--- a/drivers/irqchip/irq-versatile-fpga.c
+++ b/drivers/irqchip/irq-versatile-fpga.c
@@ -210,7 +210,12 @@ int __init fpga_irq_of_init(struct device_node *node,
                 parent_irq = -1;
         }
 
+#ifdef CONFIG_ARCH_VERSATILE
+        fpga_irq_init(base, node->name, IRQ_SIC_START, parent_irq, valid_mask,
+                                  node);
+#else
         fpga_irq_init(base, node->name, 0, parent_irq, valid_mask, node);
+#endif
 
         writel(clear_mask, base + IRQ_ENABLE_CLEAR);
         writel(clear_mask, base + FIQ_ENABLE_CLEAR);