/* Copyright 2021 Joshua Bakita
* SPDX-License-Identifier: MIT
*/
// TODO(jbakita): Don't depend on these.
#include <nvgpu/gk20a.h> // For struct gk20a
#include <linux/proc_fs.h> // For PDE_DATA() macro
#include <linux/device.h> // For dev_get_drvdata()
#include <linux/version.h> // For KERNEL_VERSION and LINUX_VERSION_CODE
#include <asm/io.h>
/* Runlist Channel
A timeslice group (TSG) is composed of channels. Each channel is a FIFO queue
of GPU commands. These commands are typically queued from userspace.
Prior to Volta, channels could also exist independent of a TSG. These are
called "bare channels" in the Jetson nvgpu driver.
`INST_PTR` points to a GPU Instance Block which contains FIFO states, virtual
address space configuration for this context, and a pointer to the page
tables. All channels in a TSG point to the same GPU Instance Block (?).
"RUNQUEUE_SELECTOR determines to which runqueue the channel belongs, and
thereby which PBDMA will run the channel. Increasing values select
increasingly numbered PBDMA IDs serving the runlist. If the selector value
exceeds the number of PBDMAs on the runlist, the hardware will silently
reassign the channel to run on the first PBDMA as though RUNQUEUE_SELECTOR had
been set to 0. (In current hardware, this is used by SCG on the graphics
runlist only to determine which FE pipe should service a given channel. A
value of 0 targets the first FE pipe, which can process all FE driven engines:
Graphics, Compute, Inline2Memory, and TwoD. A value of 1 targets the second
FE pipe, which can only process Compute work. Note that GRCE work is allowed
on either runqueue." (NVIDIA) Note that it appears runqueue 1 is the default
for CUDA work on the Jetson Xavier.
ENTRY_TYPE (T) : type of this entry: ENTRY_TYPE_CHAN
CHID (ID) : identifier of the channel to run (overlays ENTRY_ID)
RUNQUEUE_SELECTOR (Q) : selects which PBDMA should run this channel if
more than one PBDMA is supported by the runlist,
additionally, "A value of 0 targets the first FE
pipe, which can process all FE driven engines:
Graphics, Compute, Inline2Memory, and TwoD. A value
of 1 targets the second FE pipe, which can only
process Compute work. Note that GRCE work is allowed
on either runqueue.)"
INST_PTR_LO : lower 20 bits of the 4k-aligned instance block pointer
INST_PTR_HI : upper 32 bit of instance block pointer
INST_TARGET (TGI) : aperture of the instance block
USERD_PTR_LO : upper 24 bits of the low 32 bits, of the 512-byte-aligned USERD pointer
USERD_PTR_HI : upper 32 bits of USERD pointer
USERD_TARGET (TGU) : aperture of the USERD data structure
Channels were around since at least Fermi, but were rearranged with Volta to
add a USERD pointer, a longer INST pointer, and a runqueue selector flag.
*/
enum ENTRY_TYPE {ENTRY_TYPE_CHAN = 0, ENTRY_TYPE_TSG = 1};
enum INST_TARGET {TARGET_VID_MEM = 0, TARGET_SYS_MEM_COHERENT = 2, TARGET_SYS_MEM_NONCOHERENT = 3};
static inline char* target_to_text(enum INST_TARGET t) {
switch (t) {
case TARGET_VID_MEM:
return "VID_MEM";
case TARGET_SYS_MEM_COHERENT:
return "SYS_MEM_COHERENT";
case TARGET_SYS_MEM_NONCOHERENT:
return "SYS_MEM_NONCOHERENT";
default:
printk(KERN_WARNING "[nvdebug] Invalid aperture!\n");
return "INVALID";
}
}
// Support: Volta, Ampere, Turing
struct gv100_runlist_chan {
// 0:63
enum ENTRY_TYPE entry_type:1;
uint32_t runqueue_selector:1;
uint32_t padding:2;
enum INST_TARGET inst_target:2;
uint32_t padding2:2;
uint32_t userd_ptr_lo:24;
uint32_t userd_ptr_hi:32;
// 64:128
uint32_t chid:12;
uint32_t inst_ptr_lo:20;
uint32_t inst_ptr_hi:32;
} __attribute__((packed));
// Support: Fermi, Kepler*, Maxwell, Pascal
// *In Kepler, inst fields may be unpopulated?
struct gm107_runlist_chan {
uint32_t chid:12;
uint32_t padding0:1;
enum ENTRY_TYPE entry_type:1;
uint32_t padding1:18;
uint32_t inst_ptr_lo:20;
enum INST_TARGET inst_target:2; // Totally guessing on this
uint32_t padding2:10;
} __attribute__((packed));
#define gk110_runlist_chan gm107_runlist_chan
/* Runlist TSG (TimeSlice Group)
The runlist is composed of timeslice groups (TSG). Each TSG corresponds
to a single virtual address space on the GPU and contains `TSG_LENGTH`
channels. These channels and virtual address space are accessible to the GPU
host unit for use until the timeslice expires or a TSG switch is forcibly
initiated via a write to `NV_PFIFO_PREEMPT`.
timeslice = (TSG_TIMESLICE_TIMEOUT << TSG_TIMESLICE_SCALE) * 1024 nanoseconds
ENTRY_TYPE (T) : type of this entry: ENTRY_TYPE_TSG
TIMESLICE_SCALE : scale factor for the TSG's timeslice
TIMESLICE_TIMEOUT : timeout amount for the TSG's timeslice
TSG_LENGTH : number of channels that are part of this timeslice group
TSGID : identifier of the Timeslice group (overlays ENTRY_ID)
TSGs appear to have been introduced with Kepler and stayed the same until
they were rearranged at the time of channel rearrangement to support longer
GPU instance addresses with Volta.
*/
// Support: Volta, Ampere*, Turing*
// *These treat the top 8 bits of TSGID as GFID (unused)
struct gv100_runlist_tsg {
// 0:63
enum ENTRY_TYPE entry_type:1;
uint64_t padding:15;
uint32_t timeslice_scale:4;
uint64_t padding2:4;
uint32_t timeslice_timeout:8;
uint32_t tsg_length:8;
uint32_t padding3:24;
// 64:128
uint32_t tsgid:12;
uint64_t padding4:52;
} __attribute__((packed));
#define MAX_TSGID (1 << 12)
// Support: Kepler (v2?), Maxwell, Pascal
// Same fields as Volta except tsg_length is 6 bits rather than 8
// Last 32 bits appear to contain an undocumented inst ptr
struct gk110_runlist_tsg {
uint32_t tsgid:12;
uint32_t padding0:1;
enum ENTRY_TYPE entry_type:1;
uint32_t timeslice_scale:4;
uint32_t timeslice_timeout:8;
uint32_t tsg_length:6;
uint32_t padding1:32;
} __attribute__((packed));
enum PREEMPT_TYPE {PREEMPT_TYPE_CHANNEL = 0, PREEMPT_TYPE_TSG = 1};
/* Preempt a TSG or Channel by ID
ID/CHID : Id of TSG or channel to preempt
IS_PENDING : Is a context switch pending?
TYPE : PREEMPT_TYPE_CHANNEL or PREEMPT_TYPE_TSG
Support: Kepler, Maxwell, Pascal, Volta, Turing
*/
#define NV_PFIFO_PREEMPT 0x00002634
typedef union {
struct {
uint32_t id:12;
uint32_t padding:8;
bool is_pending:1;
uint32_t padding2:3;
enum PREEMPT_TYPE type:2;
uint32_t padding3:6;
} __attribute__((packed));
uint32_t raw;
} pfifo_preempt_t;
/*
"Initiate a preempt of the engine by writing the bit associated with its
runlist to NV_PFIFO_RUNLIST_PREEMPT... Do not poll NV_PFIFO_RUNLIST_PREEMPT
for the preempt to complete."
Useful for preempting multiple runlists at once.
Appears to trigger an interrupt or some other side-effect on the Jetson
Xavier, as the built-in nvgpu driver seems to be disturbed by writing to this.
To select the runlist dynamically, use the BIT(nr) kernel macro.
Example:
runlist_preempt_t rl_preempt;
rl_preempt.raw = nvdebug_readl(g, NV_PFIFO_RUNLIST_PREEMPT);
rl_preempt.raw |= BIT(nr);
nvdebug_writel(g, NV_PFIFO_RUNLIST_PREEMPT, rl_preempt.raw);
Support: Volta
*/
#define NV_PFIFO_RUNLIST_PREEMPT 0x00002638
typedef union {
struct {
bool runlist_0:1;
bool runlist_1:1;
bool runlist_2:1;
bool runlist_3:1;
bool runlist_4:1;
bool runlist_5:1;
bool runlist_6:1;
bool runlist_7:1;
bool runlist_8:1;
bool runlist_9:1;
bool runlist_10:1;
bool runlist_11:1;
bool runlist_12:1;
bool runlist_13:1;
uint32_t padding:18;
} __attribute__((packed));
uint32_t raw;
} runlist_preempt_t;
/* Additional information on preempting from NVIDIA's driver (commit b1d0d8ece)
* "From h/w team
* Engine save can be blocked by eng stalling interrupts.
* FIFO interrupts shouldn’t block an engine save from
* finishing, but could block FIFO from reporting preempt done.
* No immediate reason to reset the engine if FIFO interrupt is
* pending.
* The hub, priv_ring, and ltc interrupts could block context
* switch (or memory), but doesn’t necessarily have to.
* For Hub interrupts they just report access counters and page
* faults. Neither of these necessarily block context switch
* or preemption, but they could.
* For example a page fault for graphics would prevent graphics
* from saving out. An access counter interrupt is a
* notification and has no effect.
* SW should handle page faults though for preempt to complete.
* PRI interrupt (due to a failed PRI transaction) will result
* in ctxsw failure reported to HOST.
* LTC interrupts are generally ECC related and if so,
* certainly don’t block preemption/ctxsw but they could.
* Bus interrupts shouldn’t have anything to do with preemption
* state as they are part of the Host EXT pipe, though they may
* exhibit a symptom that indicates that GPU is in a bad state.
* To be completely fair, when an engine is preempting SW
* really should just handle other interrupts as they come in.
* It’s generally bad to just poll and wait on a preempt
* to complete since there are many things in the GPU which may
* cause a system to hang/stop responding."
*/
// Note: This is different with Turing
// Support: Fermi, Kepler, Maxwell, Pascal, Volta
#define NV_PFIFO_RUNLIST_BASE 0x00002270
#define NV_PFIFO_ENG_RUNLIST_BASE(i) (0x00002280+(i)*8)
typedef union {
struct {
uint32_t ptr:28;
enum INST_TARGET target:2;
uint32_t padding:2;
} __attribute__((packed));
uint32_t raw;
} runlist_base_t;
// Support: Kepler, Maxwell, Pascal, Volta
// Works on Fermi, but id is one bit longer and is b11111
#define NV_PFIFO_RUNLIST 0x00002274
#define NV_PFIFO_ENG_RUNLIST(i) (0x00002284+(i)*8)
typedef union {
// RUNLIST fields
struct {
uint32_t len:16;
uint32_t padding:4;
uint32_t id:4; // Runlist ID (each engine may have a seperate runlist)
uint32_t padding2:8;
} __attribute__((packed));
// ENG_RUNLIST fields that differ
struct {
uint32_t padding3:20;
bool is_pending:1; // Is runlist not yet committed?
uint32_t padding4:11;
} __attribute__((packed));
uint32_t raw;
} runlist_info_t;
enum CHANNEL_STATUS {
CHANNEL_STATUS_IDLE = 0,
CHANNEL_STATUS_PENDING = 1,
CHANNEL_STATUS_PENDING_CTX_RELOAD = 2,
CHANNEL_STATUS_PENDING_ACQUIRE = 3,
CHANNEL_STATUS_PENDING_ACQ_CTX_RELOAD = 4,
CHANNEL_STATUS_ON_PBDMA = 5,
CHANNEL_STATUS_ON_PBDMA_AND_ENG = 6,
CHANNEL_STATUS_ON_ENG = 7,
CHANNEL_STATUS_ON_ENG_PENDING_ACQUIRE = 8,
CHANNEL_STATUS_ON_ENG_PENDING = 9,
CHANNEL_STATUS_ON_PBDMA_CTX_RELOAD = 10,
CHANNEL_STATUS_ON_PBDMA_AND_ENG_CTX_RELOAD = 11,
CHANNEL_STATUS_ON_ENG_CTX_RELOAD = 12,
CHANNEL_STATUS_ON_ENG_PENDING_CTX_RELOAD = 13,
CHANNEL_STATUS_ON_ENG_PENDING_ACQ_CTX_RELOAD = 14,
};
#define NV_PCCSR_CHANNEL_INST(i) (0x00800000+(i)*8)
// There are a total of 512 possible channels
#define MAX_CHID 512
typedef union {
struct {
// 0:31
uint32_t inst_ptr:28;
enum INST_TARGET inst_target:2;
uint32_t padding0:1;
bool inst_bind:1;
// 32:64
bool enable:1;
bool next:1;
uint32_t padding:6;
bool force_ctx_reload:1;
uint32_t padding2:1;
bool enable_set:1;
bool enable_clear:1;
uint32_t padding3:10;
bool pbdma_faulted:1;
bool eng_faulted:1;
enum CHANNEL_STATUS status:4;
bool busy:1;
uint32_t padding4:3;
} __attribute__((packed));
uint64_t raw;
} channel_ctrl_t;
/* Control word for runlist enable/disable.
RUNLIST_N : Is runlist n disabled? (1 == disabled, 0 == enabled)
To select the runlist dynamically, use the BIT(nr) kernel macro.
Disabling example:
runlist_disable_t rl_disable;
rl_disable.raw = nvdebug_readl(g, NV_PFIFO_SCHED_DISABLE);
rl_disable.raw |= BIT(nr);
nvdebug_writel(g, NV_PFIFO_SCHED_DISABLE, rl_disable.raw);
Enabling example:
runlist_disable_t rl_disable;
rl_disable.raw = nvdebug_readl(g, NV_PFIFO_SCHED_DISABLE);
rl_disable.raw &= ~BIT(nr);
nvdebug_writel(g, NV_PFIFO_SCHED_DISABLE, rl_disable.raw);
Support: Fermi, Kepler, Maxwell, Pascal, Volta, Turing
*/
#define NV_PFIFO_SCHED_DISABLE 0x00002630
typedef union {
struct {
bool runlist_0:1;
bool runlist_1:1;
bool runlist_2:1;
bool runlist_3:1;
bool runlist_4:1;
bool runlist_5:1;
bool runlist_6:1;
bool runlist_7:1;
bool runlist_8:1;
bool runlist_9:1;
bool runlist_10:1;
uint32_t padding:21;
} __attribute__((packed));
uint32_t raw;
} runlist_disable_t;
/* Read GPU descriptors from the Master Controller (MC)
MINOR_REVISION : Legacy (only used with Celvin in Nouveau)
MAJOR_REVISION : Legacy (only used with Celvin in Nouveau)
IMPLEMENTATION : Which implementation of the GPU architecture
ARCHITECTURE : Which GPU architecture
CHIP_ID = IMPLEMENTATION + ARCHITECTURE << 4
CHIP_ID : Unique ID of all chips since Kelvin
Support: Kelvin, Rankline, Curie, Tesla, Fermi, Kepler, Maxwell, Pascal,
Volta, Turing, Ampere
*/
#define NV_MC_BOOT_0 0x00000000
#define NV_CHIP_ID_GP106 0x136 // Discrete GeForce GTX 1060
#define NV_CHIP_ID_GV11B 0x15B // Jetson Xavier embedded GPU
#define NV_CHIP_ID_KEPLER 0x0E0
#define NV_CHIP_ID_VOLTA 0x140
inline static const char* ARCH2NAME(uint32_t arch) {
switch (arch) {
case 0x01:
return "Celsius";
case 0x02:
return "Kelvin";
case 0x03:
return "Rankline";
case 0x04:
case 0x06: // 0x06 is (nForce 6XX integrated only)
return "Curie";
// 0x07 is unused/skipped
case 0x05: // First Tesla card was released before the nForce 6XX
case 0x08:
case 0x09:
case 0x0A:
return "Tesla";
// 0x0B is unused/skipped
case 0x0C:
case 0x0D:
return "Fermi";
case 0x0E:
case 0x0F:
case 0x11:
return "Kepler";
case 0x12:
return "Maxwell";
case 0x13:
return "Pascal";
case 0x14:
case 0x15: // Volta integrated
return "Volta";
case 0x16:
return "Turing";
case 0x17:
return "Ampere";
case 0x18:
case 0x19:
return "Hopper (?) or Lovelace (?)";
default:
if (arch < 0x19)
return "[unknown historical architecture]";
else
return "[future]";
}
}
typedef union {
// Fields as defined in the NVIDIA reference
struct {
uint32_t minor_revision:4;
uint32_t major_revision:4;
uint32_t reserved:4;
uint32_t padding0:8;
uint32_t implementation:4;
uint32_t architecture:5;
uint32_t padding1:3;
} __attribute__((packed));
uint32_t raw;
// Arch << 4 + impl is also often used
struct {
uint32_t padding2:20;
uint32_t chip_id:9;
uint32_t padding3:3;
} __attribute__((packed));
} mc_boot_0_t;
enum DEVICE_INFO_TYPE {INFO_TYPE_NOT_VALID = 0, INFO_TYPE_DATA = 1, INFO_TYPE_ENUM = 2, INFO_TYPE_ENGINE_TYPE = 3};
enum ENGINE_TYPES {
ENGINE_GRAPHICS = 0, // GRAPHICS [/compute]
ENGINE_COPY0 = 1, // [raw/physical] COPY #0
ENGINE_COPY1 = 2, // [raw/physical] COPY #1
ENGINE_COPY2 = 3, // [raw/physical] COPY #2
ENGINE_MSPDEC = 8, // Picture DECoder
ENGINE_MSPPP = 9, // [Video] Post Processing
ENGINE_MSVLD = 10, // [Video] Variable Length Decoder
ENGINE_MSENC = 11, // [Video] ENCoding
ENGINE_VIC = 12, // Video Image Compositor
ENGINE_SEC = 13, // SEquenCer [?]
ENGINE_NVENC0 = 14, // Nvidia Video ENCoder #0
ENGINE_NVENC1 = 15, // Nvidia Video ENCoder #1
ENGINE_NVDEC = 16, // Nvidia Video DECoder
ENGINE_IOCTRL = 18, // I/O ConTRoLler [of NVLINK at least]
ENGINE_LCE = 19, // Logical Copy Engine
ENGINE_GSP = 20, // Gpu System Processor
ENGINE_NVJPG = 21, // NVidia JPeG [Decoder] (Ampere+)
};
#define ENGINE_TYPES_LEN 22
static const char* const ENGINE_TYPES_NAMES[ENGINE_TYPES_LEN] = {
"Graphics/Compute",
"COPY0",
"COPY1",
"COPY2",
"Unknown Engine ID#4",
"Unknown Engine ID#5",
"Unknown Engine ID#6",
"Unknown Engine ID#7",
"MSPDEC: Picture Decoder",
"MSPPP: Post Processing",
"MSVLD: Variable Length Decoder",
"MSENC: Encoder",
"VIC: Video Image Compositor",
"SEC: Sequencer",
"NVENC0: NVIDIA Video Encoder #0",
"NVENC1: NVIDIA Video Encoder #1",
"NVDEC: NVIDIA Video Decoder",
"Unknown Engine ID#17",
"IOCTRL: I/O Controller",
"LCE: Logical Copy Engine",
"GSP: GPU System Processor",
"NVJPG: NVIDIA JPEG Decoder",
};
/* GPU engine information and control register offsets
Each engine is described by one or more entries (terminated by an entry with
the `has_next_entry` flag unset) in the fixed-size PTOP_DEVICE_INFO table. A
typical device, such as the graphics/compute engine and any copy engines, are
described by three entries, one of each type.
The PTOP_DEVICE_INFO table is sparsely populated (entries of type
INFO_TYPE_NOT_VALID may be intermingled with valid entries), so any traversal
code should check all NV_PTOP_DEVICE_INFO__SIZE_1 entries and not terminate
upon reaching the first entry of INFO_TYPE_NOT_VALID.
INFO_TYPE : Is this a DATA, ENUM, or ENGINE_TYPE table entry?
HAS_NEXT_ENTRY : Does the following entry refer to the same engine?
== INFO_TYPE_DATA fields ==
PRI_BASE : BAR0 base = (PRI_BASE << 12) aka 4k aligned.
INST_ID : "Note that some instanced [engines] (such as logical copy
engines aka LCE) share a PRI_BASE across all [engines] of
the same engine type; such [engines] require an additional
offset: instanced base = BAR0 base + stride * INST_ID.
FAULT_ID_IS_VALID : Does this engine have its own bind point and fault ID
with the MMU?
FAULT_ID : "The MMU fault id used by this [engine]. These IDs
correspond to the NV_PFAULT_MMU_ENG_ID define list."
== INFO_TYPE_ENUM fields ==
ENGINE_IS_VALID : Is this engine a host engine?
ENGINE_ENUM : "[T]he host engine ID for the current [engine] if it is
a host engine, meaning Host can send methods to the
engine. This id is used to index into any register array
whose __SIZE_1 is equal to NV_HOST_NUM_ENGINES. A given
ENGINE_ENUM can be present for at most one device in the
table. Devices corresponding to all ENGINE_ENUM ids 0
through NV_HOST_NUM_ENGINES - 1 must be present in the
device info table."
RUNLIST_IS_VALID : Is this engine a host engine with a runlist?
RUNLIST_ENUM : "[T]he Host runlist ID on which methods for the current
[engine] should be submitted... The runlist id is used to
index into any register array whose __SIZE_1 is equal to
NV_HOST_NUM_RUNLISTS. [Engines] corresponding to all
RUNLIST_ENUM ids 0 through NV_HOST_NUM_RUNLISTS - 1 must
be present in the device info table."
INTR_IS_VALID : Does this device have an interrupt?
INTR_ENUM : Interrupt ID for use with "the NV_PMC_INTR_*_DEVICE
register bitfields."
RESET_IS_VALID : Does this engine have a reset ID?
RESET_ENUM : Reset ID for use indexing the "NV_PMC_ENABLE_DEVICE(i)
and NV_PMC_ELPG_ENABLE_DEVICE(i) register bitfields."
== INFO_TYPE_ENGINE_TYPE fields ==
ENGINE_TYPE : What type of engine is this? (see ENGINE_TYPES_NAMES)
Support: Kepler, Maxwell, Pascal, Volta, Ampere
See dev_top.ref.txt of NVIDIA's open-gpu-doc for more info.
*/
#define NV_PTOP_DEVICE_INFO(i) (0x00022700+(i)*4)
#define NV_PTOP_DEVICE_INFO__SIZE_1 64
typedef union {
// DATA type fields
struct {
enum DEVICE_INFO_TYPE info_type:2;
bool fault_id_is_valid:1;
uint32_t fault_id:7;
uint32_t padding0:2;
uint32_t pri_base:12;
uint32_t padding1:2;
uint32_t inst_id:4;
uint32_t is_not_enum2:1;
bool has_next_entry:1;
} __attribute__((packed));
// ENUM type fields
struct {
uint32_t padding2:2;
bool reset_is_valid:1;
bool intr_is_valid:1;
bool runlist_is_valid:1;
bool engine_is_valid:1;
uint32_t padding3:3;
uint32_t reset_enum:5;
uint32_t padding4:1;
uint32_t intr_enum:5;
uint32_t padding5:1;
uint32_t runlist_enum:4;
uint32_t padding6:1;
uint32_t engine_enum:4;
uint32_t padding7:2;
} __attribute__((packed));
// ENGINE_TYPE type fields
struct {
uint32_t padding8:2;
enum ENGINE_TYPES engine_type:29;
uint32_t padding9:1;
} __attribute__((packed));
uint32_t raw;
} ptop_device_info_t;
#define NV_PTOP_SCAL_NUM_GPCS 0x00022430
#define NV_PTOP_SCAL_NUM_TPC_PER_GPC 0x00022434
#define NV_PTOP_SCAL_NUM_CES 0x00022444
// PCE_MAP is Volta+ only
#define NV_CE_PCE_MAP 0x00104028
// GPC and TPC masks
// Support: Maxwell+
#define NV_FUSE_GPC 0x00021c1c
#define NV_FUSE_TPC_FOR_GPC(i) (0x00021c38+(i)*4)
/* Location of the 1Kb instance block with page tables for BAR1 and BAR2.
Support: Fermi+ (?), Pascal
*/
#define NV_PBUS_BAR1_BLOCK 0x00001704
#define NV_PBUS_BAR2_BLOCK 0x00001714
typedef union {
struct {
uint32_t ptr:28;
enum INST_TARGET target:2;
uint32_t padding0:1;
bool is_virtual:1;
} __attribute__((packed));
uint32_t raw;
struct {
uint32_t map:30;
uint32_t padding1:2;
} __attribute__((packed));
} bar_config_block_t;
/* BAR0 PRAMIN (Private RAM Instance) window configuration
BASE : Base of window >> 16 in [TARGET] virtual address space
TARGET : Which address space BASE points into
Note: This seems to be set to 0x0bff00000 - 0x0c0000000 at least sometimes
Support: Tesla 2.0, Fermi, Kepler, Maxwell, Pascal, Turing, Ampere
*/
#define NV_PBUS_BAR0_WINDOW 0x00001700
#define NV_PRAMIN 0x00700000 // Goes until 0x00800000 (1MB window)
#define NV_PRAMIN_LEN 0x00100000
typedef union {
struct {
uint32_t base:24;
enum INST_TARGET target:2;
uint32_t padding0:6;
} __attribute__((packed));
uint32_t raw;
} bar0_window_t;
// Support: Tesla 2.0, Fermi, Kepler, Maxwell, Pascal, Turing, Ampere
#define NV_PRAMIN_PDB_CONFIG_OFF 0x200
typedef union {
struct {
uint32_t target:2;
uint32_t vol:1;
uint32_t padding0:1;
uint32_t fault_replay_tex:1;
uint32_t fault_replay_gcc:1;
uint32_t padding1:4;
bool is_ver2:1;
bool is_64k_big_page:1; // 128Kb otherwise
uint32_t page_dir_lo:20;
uint32_t page_dir_hi:32;
} __attribute__((packed));
uint64_t raw;
} page_dir_config_t;
/* Page directory entry
Note: Format changed with Pascal (how?)
Support: Pascal, Volta, Turing, Ampere
*/
// FIXME: PDE/PTEs are actually 64 bits =S
// Important: Aperture keys are different with PDEs
enum PD_TARGET {
PD_AND_TARGET_INVALID = 0, // b000
PD_AND_TARGET_VID_MEM = 2, // b010
PD_AND_TARGET_SYS_MEM_COHERENT = 4, // b100
PD_AND_TARGET_SYS_MEM_NONCOHERENT = 6, // b110
PTE_AND_TARGET_VID_MEM = 1, // b001
PTE_AND_TARGET_PEER = 3, // b011
PTE_AND_TARGET_SYS_MEM_COHERENT = 5, // b101
PTE_AND_TARGET_SYS_MEM_NONCOHERENT = 7, // b111
};
static inline char* pd_target_to_text(enum PD_TARGET t) {
switch (t) {
case PD_AND_TARGET_INVALID:
return "INVALID";
case PD_AND_TARGET_VID_MEM:
case PTE_AND_TARGET_VID_MEM:
return "VID_MEM";
case PTE_AND_TARGET_PEER:
return "PEER";
case PD_AND_TARGET_SYS_MEM_COHERENT:
case PTE_AND_TARGET_SYS_MEM_COHERENT:
return "SYS_MEM_COHERENT";
case PD_AND_TARGET_SYS_MEM_NONCOHERENT:
case PTE_AND_TARGET_SYS_MEM_NONCOHERENT:
return "SYS_MEM_NONCOHERENT";
default:
printk(KERN_WARNING "[nvdebug] Invalid aperture!\n");
return NULL;
}
}
// PDE/PTE V2 type
// Note: As the meaning of target (bits 2:1) changes depending on if the entry
// is a PTE or not, this combines them into a single target field to
// simplify comparisons.
// Support: Pascal, Turing, Ampere
typedef union {
// Page Directory Entry (PDE)
struct {
bool is_pte:1;
uint32_t __target:2;
bool is_volatile:1;
uint32_t padding1:4;
uint32_t addr:24;
} __attribute__((packed));
// Page Table Entry (PTE)
struct {
enum PD_TARGET target:3;
uint32_t __is_volatile:1;
bool is_encrypted:1;
bool is_privileged:1;
bool is_readonly:1;
bool atomics_disabled:1;
uint32_t __addr:24;
} __attribute__((packed));
uint32_t raw;
} page_dir_entry_t;
// PDE/PTE V1 types
// Support: Fermi, Kepler, Maxwell
enum V1_PD_TARGET {
PD_TARGET_INVALID = 0,
PD_TARGET_VID_MEM = 1,
PD_TARGET_SYS_MEM_COHERENT = 2,
PD_TARGET_SYS_MEM_NONCOHERENT = 3,
};
// Page Directory Entry (PDE)
typedef union {
// Large page fields
struct {
// 0:32
enum V1_PD_TARGET target:2;
uint32_t padding0:2;
uint64_t addr:28; // May be wider?
// 32:63
uint32_t padding2:3;
uint32_t is_volatile:1; // Might have counted wrong?
uint32_t padding3:28;
} __attribute__((packed));
// Small page fields
struct {
// 0:32
uint32_t padding00:32;
// 32:63
enum V1_PD_TARGET alt_target:2;
uint32_t alt_is_volatile:1; // Might have counted wrong?
uint32_t padding03:1;
uint64_t alt_addr:28;
} __attribute__((packed));
uint64_t raw;
} page_dir_entry_v1_t;
// Page Table Entry (PTE)
// Reconstructed from info in Jetson nvgpu driver
typedef union {
struct {
// 0:32
bool is_present:1;
bool is_privileged:1;
bool is_readonly:1;
uint32_t padding0:1;
uint64_t addr:28;
// 32:63
bool is_volatile:1;
enum INST_TARGET:2;
uint32_t padding1:1;
uint32_t kind:8;
uint32_t comptag:17;
uint32_t padding2:1;
bool is_read_disabled:1;
bool is_write_disabled:1;
} __attribute__((packed));
uint64_t raw;
} page_tbl_entry_v1_t;
//enum V0_PDE_TYPE {NOT_PRESENT = 0, PAGE_64K = 1, PAGE_16K = 2, PAGE_4K = 3};
//enum V0_PDE_SIZE {PDE_SZ_128K = 0, PDE_SZ_32K = 1, PDE_SZ_16K = 2, PDE_SZ_8K = 3};
//static const int V0_PDE_SIZE2NUM[4] = {128*1024, 32*1024, 16*1024, 8*1024};
/* PDE V0 (nv50/Tesla)
typedef union {
struct {
enum V1_PDE_TYPE type:2;
enum INST_TARGET target:2;
uint32_t padding0:1;
enum V1_PDE_SIZE sublevel_size:2;
uint32_t padding1:5;
uint32_t addr:28;
uint32_t padding2:24;
} __attribute__((packed));
uint64_t raw;
} page_dir_entry_v1_t;*/
/* PTE V0 (nv50)
typedef union {
struct {
bool is_present:1;
uint32_t padding3:2;
bool is_readonly:1;
enum INST_TARGET target:2;
bool is_privileged:1;
uint32_t contig_blk_sz:3;
uint32_t padding4:2;
uint32_t addr:28;
uint32_t storage_type:7; // ???
uint32_t compression_mode:2; // ???
uint32_t compression_tag:12; // ???
bool is_long_partition_cycle:1; // ???
bool is_encrypted:1;
uint32_t padding5:1;
} __attribute__((packed));
uint64_t raw;
} page_tbl_entry_v1_t;*/
// TODO(jbakita): Maybe put the above GPU types in a different file.
#define NV_PCI_VENDOR 0x10de
struct nvdebug_state {
// Pointer to the mapped base address of the GPU control registers (obtained
// via ioremap() originally). For embedded GPUs, we extract this from their
// struct nvgpu_os_linux. For discrete GPUs, we create our own mapping of
// BAR0 with pci_iomap(). Access via nvgpu_readl/writel functions.
void __iomem *regs;
// Depending on the architecture, BAR2 or BAR3 are used to access PRAMIN
union {
void __iomem *bar2;
void __iomem *bar3;
};
int chip_id;
// Additional state from the built-in driver. Only set iff
// chip_id == NV_CHIP_ID_GV11B
struct gk20a *g;
// Pointer to PCI device needed for pci_iounmap
struct pci_dev *pcid;
};
/*const struct runlist_funcs {
u8 size;
enum ENTRY_TYPE (*entry_type)(struct nvdebug_state *, void *);
uint32_t (*chid)(struct nvdebug_state *, void *);
uint32_t (*inst_ptr_lo)(struct nvdebug_state *, void *);
enum INST_TARGET (*inst_target)(struct nvdebug_state *, void *):
uint32_t (*tsgid)(struct nvdebug_state *, void *);
uint32_t (*timeslice_scale)(struct nvdebug_state *, void *);
uint32_t (*timeslice_timeout)(struct nvdebug_state *, void *);
uint32_t (*tsg_length)(struct nvdebug_state *, void *);
};*/
// This disgusting macro is a crutch to work around the fact that runlists were
// different prior to Volta.
#define VERSIONED_RL_ACCESSOR(_ENTRY_TYPE, type, prop) \
__attribute__((unused)) \
static type (prop)(const struct nvdebug_state *g, const void *raw) { \
if (g->chip_id > NV_CHIP_ID_VOLTA) { \
const struct gv100_runlist_ ## _ENTRY_TYPE *entry = (struct gv100_runlist_ ## _ENTRY_TYPE*)raw; \
return entry->prop; \
} else if (g->chip_id > NV_CHIP_ID_KEPLER) { \
const struct gk110_runlist_ ## _ENTRY_TYPE *entry = (struct gk110_runlist_ ## _ENTRY_TYPE*)raw; \
return entry->prop; \
} else { \
printk(KERN_WARNING "[nvdebug] " #prop " unavailable on GPU ID %x, which is older than Kepler.\n", g->chip_id); \
return (type)0; \
} \
}
VERSIONED_RL_ACCESSOR(chan, uint32_t, chid);
VERSIONED_RL_ACCESSOR(chan, uint32_t, inst_ptr_lo);
VERSIONED_RL_ACCESSOR(chan, enum INST_TARGET, inst_target);
VERSIONED_RL_ACCESSOR(tsg, uint32_t, tsgid);
VERSIONED_RL_ACCESSOR(tsg, enum ENTRY_TYPE, entry_type);
VERSIONED_RL_ACCESSOR(tsg, uint32_t, timeslice_scale);
VERSIONED_RL_ACCESSOR(tsg, uint32_t, timeslice_timeout);
VERSIONED_RL_ACCESSOR(tsg, uint32_t, tsg_length);
#define NV_RL_ENTRY_SIZE(g) \
((g)->chip_id >= NV_CHIP_ID_VOLTA ? sizeof(struct gv100_runlist_tsg) : sizeof(struct gk110_runlist_tsg))
#define for_chan_in_tsg(g, chan, tsg) \
for (chan = (typeof(chan))(((u8*)tsg) + NV_RL_ENTRY_SIZE(g)); \
(u8*)chan < ((u8*)tsg) + (1 + tsg_length(g, tsg)) * NV_RL_ENTRY_SIZE(g); \
chan = (typeof(chan))(((u8*)chan) + NV_RL_ENTRY_SIZE(g)))
#define next_tsg(g, tsg) \
(typeof(tsg))((u8*)(tsg) + NV_RL_ENTRY_SIZE(g) * (tsg_length(g, tsg) + 1))
struct runlist_iter {
// Pointer to either a TSG or channel entry (they're the same size)
void *curr_entry;
// This should be set to tsg_length when a TSG is reached, and
// decremented as each subsequent channel is printed. This allows us to
// track which channel are and are not part of the TSG.
int channels_left_in_tsg;
// Total runlist length, etc
runlist_info_t rl_info;
};
#define NVDEBUG_MAX_DEVICES 8
extern struct nvdebug_state g_nvdebug_state[NVDEBUG_MAX_DEVICES];
// Defined in runlist.c
int get_runlist_iter(struct nvdebug_state *g, int rl_id, struct runlist_iter *rl_iter);
int preempt_tsg(struct nvdebug_state *g, uint32_t tsg_id);
// Defined in mmu.c
uint32_t vram2PRAMIN(struct nvdebug_state *g, uint64_t addr);
void __iomem *phy2PRAMIN(struct nvdebug_state* g, uint64_t phy);
uint64_t search_page_directory(
struct nvdebug_state *g,
void __iomem *pde_offset,
void __iomem *(*off2addr)(struct nvdebug_state*, uint64_t),
uint64_t addr_to_find);
uint64_t search_v1_page_directory(
struct nvdebug_state *g,
void __iomem *pde_offset,
void __iomem *(*off2addr)(struct nvdebug_state*, uint64_t),
uint64_t addr_to_find);
static inline struct gk20a *get_gk20a(struct device *dev) {
// XXX: Only works because gk20a* is the first member of gk20a_platform
return *((struct gk20a**)dev_get_drvdata(dev));
}
// We us the data field of the proc_dir_entry ("PDE" in this function) to store
// our index into the g_nvdebug_state array
static inline int seq2gpuidx(struct seq_file *s) {
const struct file *f = s->file;
return (uintptr_t)PDE_DATA(file_inode(f));
}
static inline int file2gpuidx(const struct file *f) {
return (uintptr_t)PDE_DATA(file_inode(f));
}
static inline int file2parentgpuidx(const struct file *f) {
// Should be safe to call on ProcFS entries, as our parent should (?)
// still exist if we're called. If not, there are worse races in this
// module.
return (uintptr_t)PDE_DATA(file_dentry(f)->d_parent->d_inode);
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,6,0)
// Commit 643eb158a3 in nvgpu moved the mapped registers to the second entry
// of the gk20a struct (after a function pointer). This change was made as L4T
// was upgraded from Linux 4.9 to 5.10 (r32 -> r34+)
// Note that this is wrong if nvgpu was built without CONFIG_NVGPU_NON_FUSA
// i.e. if FUSA was enabled, this is wrong.
#define gk20a_regs(gk20a) ((void*)gk20a + sizeof(void(*)(void)))
#else
#include <os/linux/os_linux.h> // For struct nvgpu_os_linux, which holds regs
#define gk20a_regs(gk20a) (container_of(gk20a, struct nvgpu_os_linux, g)->regs)
#endif
// Similar to nvgpu_readl()
// (except we don't try to resolve situations where regs is NULL)
static inline u32 nvdebug_readl(struct nvdebug_state *s, u32 r) {
if (unlikely(!s->regs || (s->g && !gk20a_regs(s->g)))) {
printk(KERN_ERR "[nvdebug] Attempted nvgpu_readl on non-existent registers!\n");
return -1;
}
return readl(s->regs + r);
}
// quadword version of nvdebug_readl()
static inline u64 nvdebug_readq(struct nvdebug_state *s, u32 r) {
u64 ret;
if (unlikely(!s->regs || (s->g && !gk20a_regs(s->g)))) {
printk(KERN_ERR "[nvdebug] Attempted nvgpu_readl on non-existent registers!\n");
return -1;
}
// readq seems to always return the uppermost 32 bits as 0, so workaround with readl
ret = readl(s->regs + r);
ret |= ((u64)readl(s->regs + r + 4)) << 32;
return ret;
}
// Similar to nvgpu_writel()
static inline void nvdebug_writel(struct nvdebug_state *s, u32 r, u32 v) {
if (unlikely(!s->regs || (s->g && !gk20a_regs(s->g)))) {
printk(KERN_ERR "[nvdebug] Attempted nvgpu_writel on non-existent registers!\n");
return;
}
writel_relaxed(v, s->regs + r);
wmb();
}
// quadword version of nvdebug_writel()
// XXX: This probably doesn't work XXX: Untested
static inline void nvdebug_writeq(struct nvdebug_state *s, u32 r, u64 v) {
if (unlikely(!s->regs || (s->g && !gk20a_regs(s->g)))) {
printk(KERN_ERR "[nvdebug] Attempted nvgpu_writel on non-existent registers!\n");
return;
}
writeq_relaxed(v, s->regs + r);
wmb();
}
