2 files changed, 95 insertions, 0 deletions

diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h
index e5f06de7d5..56239f4aab 100644
--- a/include/linux/mmc/sdio.h
+++ b/include/linux/mmc/sdio.h
@@ -49,5 +49,97 @@
 #define R5_STATUS(x)            (x & 0xCB00)
 #define R5_IO_CURRENT_STATE(x)  ((x & 0x3000) >> 12) /* s, b */
 
+/*
+ * Card Common Control Registers (CCCR)
+ */
+
+#define SDIO_CCCR_CCCR          0x00
+
+#define  SDIO_CCCR_REV_1_00     0       /* CCCR/FBR Version 1.00 */
+#define  SDIO_CCCR_REV_1_10     1       /* CCCR/FBR Version 1.10 */
+#define  SDIO_CCCR_REV_1_20     2       /* CCCR/FBR Version 1.20 */
+
+#define  SDIO_SDIO_REV_1_00     0       /* SDIO Spec Version 1.00 */
+#define  SDIO_SDIO_REV_1_10     1       /* SDIO Spec Version 1.10 */
+#define  SDIO_SDIO_REV_1_20     2       /* SDIO Spec Version 1.20 */
+#define  SDIO_SDIO_REV_2_00     3       /* SDIO Spec Version 2.00 */
+
+#define SDIO_CCCR_SD            0x01
+
+#define  SDIO_SD_REV_1_01       0       /* SD Physical Spec Version 1.01 */
+#define  SDIO_SD_REV_1_10       1       /* SD Physical Spec Version 1.10 */
+#define  SDIO_SD_REV_2_00       2       /* SD Physical Spec Version 2.00 */
+
+#define SDIO_CCCR_IOEx          0x02
+#define SDIO_CCCR_IORx          0x03
+
+#define SDIO_CCCR_IENx          0x04    /* Function/Master Interrupt Enable */
+#define SDIO_CCCR_INTx          0x05    /* Function Interrupt Pending */
+
+#define SDIO_CCCR_ABORT         0x06    /* function abort/card reset */
+
+#define SDIO_CCCR_IF            0x07    /* bus interface controls */
+
+#define  SDIO_BUS_WIDTH_1BIT    0x00
+#define  SDIO_BUS_WIDTH_4BIT    0x02
+
+#define  SDIO_BUS_CD_DISABLE     0x80   /* disable pull-up on DAT3 (pin 1) */
+
+#define SDIO_CCCR_CAPS          0x08
+
+#define  SDIO_CCCR_CAP_SDC      0x01    /* can do CMD52 while data transfer */
+#define  SDIO_CCCR_CAP_SMB      0x02    /* can do multi-block xfers (CMD53) */
+#define  SDIO_CCCR_CAP_SRW      0x04    /* supports read-wait protocol */
+#define  SDIO_CCCR_CAP_SBS      0x08    /* supports suspend/resume */
+#define  SDIO_CCCR_CAP_S4MI     0x10    /* interrupt during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_E4MI     0x20    /* enable ints during 4-bit CMD53 */
+#define  SDIO_CCCR_CAP_LSC      0x40    /* low speed card */
+#define  SDIO_CCCR_CAP_4BLS     0x80    /* 4 bit low speed card */
+
+#define SDIO_CCCR_CIS           0x09    /* common CIS pointer (3 bytes) */
+
+/* Following 4 regs are valid only if SBS is set */
+#define SDIO_CCCR_SUSPEND       0x0c
+#define SDIO_CCCR_SELx          0x0d
+#define SDIO_CCCR_EXECx         0x0e
+#define SDIO_CCCR_READYx        0x0f
+
+#define SDIO_CCCR_BLKSIZE       0x10
+
+#define SDIO_CCCR_POWER         0x12
+
+#define  SDIO_POWER_SMPC        0x01    /* Supports Master Power Control */
+#define  SDIO_POWER_EMPC        0x02    /* Enable Master Power Control */
+
+#define SDIO_CCCR_SPEED         0x13
+
+#define  SDIO_SPEED_SHS         0x01    /* Supports High-Speed mode */
+#define  SDIO_SPEED_EHS         0x02    /* Enable High-Speed mode */
+
+/*
+ * Function Basic Registers (FBR)
+ */
+
+#define SDIO_FBR_STD_IF         0x00
+
+#define  SDIO_FBR_SUPPORTS_CSA  0x40    /* supports Code Storage Area */
+#define  SDIO_FBR_ENABLE_CSA    0x80    /* enable Code Storage Area */
+
+#define SDIO_FBR_STD_IF_EXT     0x01
+
+#define SDIO_FBR_POWER          0x02
+
+#define  SDIO_FBR_POWER_SPS     0x01    /* Supports Power Selection */
+#define  SDIO_FBR_POWER_EPS     0x02    /* Enable (low) Power Selection */
+
+#define SDIO_FBR_CIS            0x09    /* CIS pointer (3 bytes) */
+
+
+#define SDIO_FBR_CSA            0x0C    /* CSA pointer (3 bytes) */
+
+#define SDIO_FBR_CSA_DATA       0x0F
+
+#define SDIO_FBR_BLKSIZE        0x10    /* block size (2 bytes) */
+
 #endif
 
diff --git a/include/linux/mmc/sdio_func.h b/include/linux/mmc/sdio_func.h
index 5c56df1962..3365fef5f7 100644
--- a/include/linux/mmc/sdio_func.h
+++ b/include/linux/mmc/sdio_func.h
@@ -55,6 +55,9 @@ extern void sdio_unregister_driver(struct sdio_driver *);
 extern void sdio_claim_host(struct sdio_func *func);
 extern void sdio_release_host(struct sdio_func *func);
 
+extern int sdio_enable_func(struct sdio_func *func);
+extern int sdio_disable_func(struct sdio_func *func);
+
 extern unsigned char sdio_readb(struct sdio_func *func,
         unsigned int addr, int *err_ret);