net/bonding: Optionally allow ethernet slaves to keep own MAC

	Update the "don't change MAC of slaves" functionality added in
previous changes to be a generic option, rather than something tied to
IB devices, as it's occasionally useful for regular ethernet devices as
well.

	Adds "fail_over_mac" option (which is automatically enabled for IB
slaves), applicable only to active-backup mode.

	Includes documentation update.

	Updates bonding driver version to 3.2.0.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

1 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 1da5666308..11340625e3 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -281,6 +281,39 @@ downdelay
         will be rounded down to the nearest multiple.  The default
         value is 0.
 
+fail_over_mac
+
+        Specifies whether active-backup mode should set all slaves to
+        the same MAC address (the traditional behavior), or, when
+        enabled, change the bond's MAC address when changing the
+        active interface (i.e., fail over the MAC address itself).
+
+        Fail over MAC is useful for devices that cannot ever alter
+        their MAC address, or for devices that refuse incoming
+        broadcasts with their own source MAC (which interferes with
+        the ARP monitor).
+
+        The down side of fail over MAC is that every device on the
+        network must be updated via gratuitous ARP, vs. just updating
+        a switch or set of switches (which often takes place for any
+        traffic, not just ARP traffic, if the switch snoops incoming
+        traffic to update its tables) for the traditional method.  If
+        the gratuitous ARP is lost, communication may be disrupted.
+
+        When fail over MAC is used in conjuction with the mii monitor,
+        devices which assert link up prior to being able to actually
+        transmit and receive are particularly susecptible to loss of
+        the gratuitous ARP, and an appropriate updelay setting may be
+        required.
+
+        A value of 0 disables fail over MAC, and is the default.  A
+        value of 1 enables fail over MAC.  This option is enabled
+        automatically if the first slave added cannot change its MAC
+        address.  This option may be modified via sysfs only when no
+        slaves are present in the bond.
+
+        This option was added in bonding version 3.2.0.
+
 lacp_rate
 
         Option specifying the rate in which we'll ask our link partner