path: root/drivers/ide/ide-atapi.c

/*
 * ATAPI support.
 */

#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <scsi/scsi.h>

#ifdef DEBUG
#define debug_log(fmt, args...) \
	printk(KERN_INFO "ide: " fmt, ## args)
#else
#define debug_log(fmt, args...) do {} while (0)
#endif

/*
 * Check whether we can support a device,
 * based on the ATAPI IDENTIFY command results.
 */
int ide_check_atapi_device(ide_drive_t *drive, const char *s)
{
	u16 *id = drive->id;
	u8 gcw[2], protocol, device_type, removable, drq_type, packet_size;

	*((u16 *)&gcw) = id[ATA_ID_CONFIG];

	protocol    = (gcw[1] & 0xC0) >> 6;
	device_type =  gcw[1] & 0x1F;
	removable   = (gcw[0] & 0x80) >> 7;
	drq_type    = (gcw[0] & 0x60) >> 5;
	packet_size =  gcw[0] & 0x03;

#ifdef CONFIG_PPC
	/* kludge for Apple PowerBook internal zip */
	if (drive->media == ide_floppy && device_type == 5 &&
	    !strstr((char *)&id[ATA_ID_PROD], "CD-ROM") &&
	    strstr((char *)&id[ATA_ID_PROD], "ZIP"))
		device_type = 0;
#endif

	if (protocol != 2)
		printk(KERN_ERR "%s: %s: protocol (0x%02x) is not ATAPI\n",
			s, drive->name, protocol);
	else if ((drive->media == ide_floppy && device_type != 0) ||
		 (drive->media == ide_tape && device_type != 1))
		printk(KERN_ERR "%s: %s: invalid device type (0x%02x)\n",
			s, drive->name, device_type);
	else if (removable == 0)
		printk(KERN_ERR "%s: %s: the removable flag is not set\n",
			s, drive->name);
	else if (drive->media == ide_floppy && drq_type == 3)
		printk(KERN_ERR "%s: %s: sorry, DRQ type (0x%02x) not "
			"supported\n", s, drive->name, drq_type);
	else if (packet_size != 0)
		printk(KERN_ERR "%s: %s: packet size (0x%02x) is not 12 "
			"bytes\n", s, drive->name, packet_size);
	else
		return 1;
	return 0;
}
EXPORT_SYMBOL_GPL(ide_check_atapi_device);

/* PIO data transfer routine using the scatter gather table. */
int ide_io_buffers(ide_drive_t *drive, struct ide_atapi_pc *pc,
		    unsigned int bcount, int write)
{
	ide_hwif_t *hwif = drive->hwif;
	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
	xfer_func_t *xf = write ? tp_ops->output_data : tp_ops->input_data;
	struct scatterlist *sg = pc->sg;
	char *buf;
	int count, done = 0;

	while (bcount) {
		count = min(sg->length - pc->b_count, bcount);

		if (PageHighMem(sg_page(sg))) {
			unsigned long flags;

			local_irq_save(flags);
			buf = kmap_atomic(sg_page(sg), KM_IRQ0) + sg->offset;
			xf(drive, NULL, buf + pc->b_count, count);
			kunmap_atomic(buf - sg->offset, KM_IRQ0);
			local_irq_restore(flags);
		} else {
			buf = sg_virt(sg);
			xf(drive, NULL, buf + pc->b_count, count);
		}

		bcount -= count;
		pc->b_count += count;
		done += count;

		if (pc->b_count == sg->length) {
			if (!--pc->sg_cnt)
				break;
			pc->sg = sg = sg_next(sg);
			pc->b_count = 0;
		}
	}

	if (bcount) {
		printk(KERN_ERR "%s: %d leftover bytes, %s\n", drive->name,
			bcount, write ? "padding with zeros"
				      : "discarding data");
		ide_pad_transfer(drive, write, bcount);
	}

	return done;
}
EXPORT_SYMBOL_GPL(ide_io_buffers);

void ide_init_pc(struct ide_atapi_pc *pc)
{
	memset(pc, 0, sizeof(*pc));
	pc->buf = pc->pc_buf;
	pc->buf_size = IDE_PC_BUFFER_SIZE;
}
EXPORT_SYMBOL_GPL(ide_init_pc);

/*
 * Generate a new packet command request in front of the request queue, before
 * the current request, so that it will be processed immediately, on the next
 * pass through the driver.
 */
static void ide_queue_pc_head(ide_drive_t *drive, struct gendisk *disk,
			      struct ide_atapi_pc *pc, struct request *rq)
{
	blk_rq_init(NULL, rq);
	rq->cmd_type = REQ_TYPE_SPECIAL;
	rq->cmd_flags |= REQ_PREEMPT;
	rq->buffer = (char *)pc;
	rq->rq_disk = disk;
	memcpy(rq->cmd, pc->c, 12);
	if (drive->media == ide_tape)
		rq->cmd[13] = REQ_IDETAPE_PC1;
	ide_do_drive_cmd(drive, rq);
}

/*
 * Add a special packet command request to the tail of the request queue,
 * and wait for it to be serviced.
 */
int ide_queue_pc_tail(ide_drive_t *drive, struct gendisk *disk,
		      struct ide_atapi_pc *pc)
{
	struct request *rq;
	int error;

	rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
	rq->cmd_type = REQ_TYPE_SPECIAL;
	rq->buffer = (char *)pc;
	memcpy(rq->cmd, pc->c, 12);
	if (drive->media == ide_tape)
		rq->cmd[13] = REQ_IDETAPE_PC1;
	error = blk_execute_rq(drive->queue, disk, rq, 0);
	blk_put_request(rq);

	return error;
}
EXPORT_SYMBOL_GPL(ide_queue_pc_tail);

int ide_do_test_unit_ready(ide_drive_t *drive, struct gendisk *disk)
{
	struct ide_atapi_pc pc;

	ide_init_pc(&pc);
	pc.c[0] = TEST_UNIT_READY;

	return ide_queue_pc_tail(drive, disk, &pc);
}
EXPORT_SYMBOL_GPL(ide_do_test_unit_ready);

int ide_do_start_stop(ide_drive_t *drive, struct gendisk *disk, int start)
{
	struct ide_atapi_pc pc;

	ide_init_pc(&pc);
	pc.c[0] = START_STOP;
	pc.c[4] = start;

	if (drive->media == ide_tape)
		pc.flags |= PC_FLAG_WAIT_FOR_DSC;

	return ide_queue_pc_tail(drive, disk, &pc);
}
EXPORT_SYMBOL_GPL(ide_do_start_stop);

int ide_set_media_lock(ide_drive_t *drive, struct gendisk *disk, int on)
{
	struct ide_atapi_pc pc;

	if (drive->atapi_flags & IDE_AFLAG_NO_DOORLOCK)
		return 0;

	ide_init_pc(&pc);
	pc.c[0] = ALLOW_MEDIUM_REMOVAL;
	pc.c[4] = on;

	return ide_queue_pc_tail(drive, disk, &pc);
}
EXPORT_SYMBOL_GPL(ide_set_media_lock);

void ide_create_request_sense_cmd(ide_drive_t *drive, struct ide_atapi_pc *pc)
{
	ide_init_pc(pc);
	pc->c[0] = REQUEST_SENSE;
	if (drive->media == ide_floppy) {
		pc->c[4] = 255;
		pc->req_xfer = 18;
	} else {
		pc->c[4] = 20;
		pc->req_xfer = 20;
	}
}
EXPORT_SYMBOL_GPL(ide_create_request_sense_cmd);

/*
 * Called when an error was detected during the last packet command.
 * We queue a request sense packet command in the head of the request list.
 */
void ide_retry_pc(ide_drive_t *drive, struct gendisk *disk)
{
	struct request *rq = &drive->request_sense_rq;
	struct ide_atapi_pc *pc = &drive->request_sense_pc;

	(void)ide_read_error(drive);
	ide_create_request_sense_cmd(drive, pc);
	if (drive->media == ide_tape)
		set_bit(IDE_AFLAG_IGNORE_DSC, &drive->atapi_flags);
	ide_queue_pc_head(drive, disk, pc, rq);
}
EXPORT_SYMBOL_GPL(ide_retry_pc);

int ide_scsi_expiry(ide_drive_t *drive)
{
	struct ide_atapi_pc *pc = drive->pc;

	debug_log("%s called for %lu at %lu\n", __func__,
		  pc->scsi_cmd->serial_number, jiffies);

	pc->flags |= PC_FLAG_TIMEDOUT;

	return 0; /* we do not want the IDE subsystem to retry */
}
EXPORT_SYMBOL_GPL(ide_scsi_expiry);

/*
 * This is the usual interrupt handler which will be called during a packet
 * command.  We will transfer some of the data (as requested by the drive)
 * and will re-point interrupt handler to us.
 */
static ide_startstop_t ide_pc_intr(ide_drive_t *drive)
{
	struct ide_atapi_pc *pc = drive->pc;
	ide_hwif_t *hwif = drive->hwif;
	struct request *rq = hwif->hwgroup->rq;
	const struct ide_tp_ops *tp_ops = hwif->tp_ops;
	xfer_func_t *xferfunc;
	ide_expiry_t *expiry;
	unsigned int timeout, temp;
	u16 bcount;
	u8 stat, ireason, scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI), dsc = 0;

	debug_log("Enter %s - interrupt handler\n", __func__);

	if (scsi) {
		timeout = ide_scsi_get_timeout(pc);
		expiry = ide_scsi_expiry;
	} else {
		timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
						       : WAIT_TAPE_CMD;
		expiry = NULL;
	}

	if (pc->flags & PC_FLAG_TIMEDOUT) {
		drive->pc_callback(drive, 0);
		return ide_stopped;
	}

	/* Clear the interrupt */
	stat = tp_ops->read_status(hwif);

	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
		if (hwif->dma_ops->dma_end(drive) ||
		    (drive->media == ide_tape && !scsi && (stat & ATA_ERR))) {
			if (drive->media == ide_floppy && !scsi)
				printk(KERN_ERR "%s: DMA %s error\n",
					drive->name, rq_data_dir(pc->rq)
						     ? "write" : "read");
			pc->flags |= PC_FLAG_DMA_ERROR;
		} else {
			pc->xferred = pc->req_xfer;
			if (drive->pc_update_buffers)
				drive->pc_update_buffers(drive, pc);
		}
		debug_log("%s: DMA finished\n", drive->name);
	}

	/* No more interrupts */
	if ((stat & ATA_DRQ) == 0) {
		debug_log("Packet command completed, %d bytes transferred\n",
			  pc->xferred);

		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;

		local_irq_enable_in_hardirq();

		if (drive->media == ide_tape && !scsi &&
		    (stat & ATA_ERR) && rq->cmd[0] == REQUEST_SENSE)
			stat &= ~ATA_ERR;

		if ((stat & ATA_ERR) || (pc->flags & PC_FLAG_DMA_ERROR)) {
			/* Error detected */
			debug_log("%s: I/O error\n", drive->name);

			if (drive->media != ide_tape || scsi) {
				pc->rq->errors++;
				if (scsi)
					goto cmd_finished;
			}

			if (rq->cmd[0] == REQUEST_SENSE) {
				printk(KERN_ERR "%s: I/O error in request sense"
						" command\n", drive->name);
				return ide_do_reset(drive);
			}

			debug_log("[cmd %x]: check condition\n", rq->cmd[0]);

			/* Retry operation */
			ide_retry_pc(drive, rq->rq_disk);

			/* queued, but not started */
			return ide_stopped;
		}
cmd_finished:
		pc->error = 0;

		if ((pc->flags & PC_FLAG_WAIT_FOR_DSC) && (stat & ATA_DSC) == 0)
			dsc = 1;

		/* Command finished - Call the callback function */
		drive->pc_callback(drive, dsc);

		return ide_stopped;
	}

	if (pc->flags & PC_FLAG_DMA_IN_PROGRESS) {
		pc->flags &= ~PC_FLAG_DMA_IN_PROGRESS;
		printk(KERN_ERR "%s: The device wants to issue more interrupts "
				"in DMA mode\n", drive->name);
		ide_dma_off(drive);
		return ide_do_reset(drive);
	}

	/* Get the number of bytes to transfer on this interrupt. */
	ide_read_bcount_and_ireason(drive, &bcount, &ireason);

	if (ireason & ATAPI_COD) {
		printk(KERN_ERR "%s: CoD != 0 in %s\n", drive->name, __func__);
		return ide_do_reset(drive);
	}

	if (((ireason & ATAPI_IO) == ATAPI_IO) ==
		!!(pc->flags & PC_FLAG_WRITING)) {
		/* Hopefully, we will never get here */
		printk(KERN_ERR "%s: We wanted to %s, but the device wants us "
				"to %s!\n", drive->name,
				(ireason & ATAPI_IO) ? "Write" : "Read",
				(ireason & ATAPI_IO) ? "Read" : "Write");
		return ide_do_reset(drive);
	}

	if (!(pc->flags & PC_FLAG_WRITING)) {
		/* Reading - Check that we have enough space */
		temp = pc->xferred + bcount;
		if (temp > pc->req_xfer) {
			if (temp > pc->buf_size) {
				printk(KERN_ERR "%s: The device wants to send "
						"us more data than expected - "
						"discarding data\n",
						drive->name);
				if (scsi)
					temp = pc->buf_size - pc->xferred;
				else
					temp = 0;
				if (temp) {
					if (pc->sg)
						drive->pc_io_buffers(drive, pc,
								     temp, 0);
					else
						tp_ops->input_data(drive, NULL,
							pc->cur_pos, temp);
					printk(KERN_ERR "%s: transferred %d of "
							"%d bytes\n",
							drive->name,
							temp, bcount);
				}
				pc->xferred += temp;
				pc->cur_pos += temp;
				ide_pad_transfer(drive, 0, bcount - temp);
				goto next_irq;
			}
			debug_log("The device wants to send us more data than "
				  "expected - allowing transfer\n");
		}
		xferfunc = tp_ops->input_data;
	} else
		xferfunc = tp_ops->output_data;

	if ((drive->media == ide_floppy && !scsi && !pc->buf) ||
	    (drive->media == ide_tape && !scsi && pc->bh) ||
	    (scsi && pc->sg)) {
		int done = drive->pc_io_buffers(drive, pc, bcount,
				  !!(pc->flags & PC_FLAG_WRITING));

		/* FIXME: don't do partial completions */
		if (drive->media == ide_floppy && !scsi)
			ide_end_request(drive, 1, done >> 9);
	} else
		xferfunc(drive, NULL, pc->cur_pos, bcount);

	/* Update the current position */
	pc->xferred += bcount;
	pc->cur_pos += bcount;

	debug_log("[cmd %x] transferred %d bytes on that intr.\n",
		  rq->cmd[0], bcount);
next_irq:
	/* And set the interrupt handler again */
	ide_set_handler(drive, ide_pc_intr, timeout, expiry);
	return ide_started;
}

static u8 ide_read_ireason(ide_drive_t *drive)
{
	ide_task_t task;

	memset(&task, 0, sizeof(task));
	task.tf_flags = IDE_TFLAG_IN_NSECT;

	drive->hwif->tp_ops->tf_read(drive, &task);

	return task.tf.nsect & 3;
}

static u8 ide_wait_ireason(ide_drive_t *drive, u8 ireason)
{
	int retries = 100;

	while (retries-- && ((ireason & ATAPI_COD) == 0 ||
		(ireason & ATAPI_IO))) {
		printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
				"a packet command, retrying\n", drive->name);
		udelay(100);
		ireason = ide_read_ireason(drive);
		if (retries == 0) {
			printk(KERN_ERR "%s: (IO,CoD != (0,1) while issuing "
					"a packet command, ignoring\n",
					drive->name);
			ireason |= ATAPI_COD;
			ireason &= ~ATAPI_IO;
		}
	}

	return ireason;
}

static int ide_delayed_transfer_pc(ide_drive_t *drive)
{
	/* Send the actual packet */
	drive->hwif->tp_ops->output_data(drive, NULL, drive->pc->c, 12);

	/* Timeout for the packet command */
	return WAIT_FLOPPY_CMD;
}

static ide_startstop_t ide_transfer_pc(ide_drive_t *drive)
{
	struct ide_atapi_pc *pc = drive->pc;
	ide_hwif_t *hwif = drive->hwif;
	struct request *rq = hwif->hwgroup->rq;
	ide_expiry_t *expiry;
	unsigned int timeout;
	ide_startstop_t startstop;
	u8 ireason;

	if (ide_wait_stat(&startstop, drive, ATA_DRQ, ATA_BUSY, WAIT_READY)) {
		printk(KERN_ERR "%s: Strange, packet command initiated yet "
				"DRQ isn't asserted\n", drive->name);
		return startstop;
	}

	ireason = ide_read_ireason(drive);
	if (drive->media == ide_tape &&
	    (drive->dev_flags & IDE_DFLAG_SCSI) == 0)
		ireason = ide_wait_ireason(drive, ireason);

	if ((ireason & ATAPI_COD) == 0 || (ireason & ATAPI_IO)) {
		printk(KERN_ERR "%s: (IO,CoD) != (0,1) while issuing "
				"a packet command\n", drive->name);
		return ide_do_reset(drive);
	}

	/*
	 * If necessary schedule the packet transfer to occur 'timeout'
	 * miliseconds later in ide_delayed_transfer_pc() after the device
	 * says it's ready for a packet.
	 */
	if (drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) {
		timeout = drive->pc_delay;
		expiry = &ide_delayed_transfer_pc;
	} else {
		if (drive->dev_flags & IDE_DFLAG_SCSI) {
			timeout = ide_scsi_get_timeout(pc);
			expiry = ide_scsi_expiry;
		} else {
			timeout = (drive->media == ide_floppy) ? WAIT_FLOPPY_CMD
							       : WAIT_TAPE_CMD;
			expiry = NULL;
		}
	}

	/* Set the interrupt routine */
	ide_set_handler(drive, ide_pc_intr, timeout, expiry);

	/* Begin DMA, if necessary */
	if (pc->flags & PC_FLAG_DMA_OK) {
		pc->flags |= PC_FLAG_DMA_IN_PROGRESS;
		hwif->dma_ops->dma_start(drive);
	}

	/* Send the actual packet */
	if ((drive->atapi_flags & IDE_AFLAG_ZIP_DRIVE) == 0)
		hwif->tp_ops->output_data(drive, NULL, rq->cmd, 12);

	return ide_started;
}

ide_startstop_t ide_issue_pc(ide_drive_t *drive, unsigned int timeout,
			     ide_expiry_t *expiry)
{
	struct ide_atapi_pc *pc = drive->pc;
	ide_hwif_t *hwif = drive->hwif;
	u16 bcount;
	u8 scsi = !!(drive->dev_flags & IDE_DFLAG_SCSI);

	/* We haven't transferred any data yet */
	pc->xferred = 0;
	pc->cur_pos = pc->buf;

	/* Request to transfer the entire buffer at once */
	if (drive->media == ide_tape && scsi == 0)
		bcount = pc->req_xfer;
	else
		bcount = min(pc->req_xfer, 63 * 1024);

	if (pc->flags & PC_FLAG_DMA_ERROR) {
		pc->flags &= ~PC_FLAG_DMA_ERROR;
		ide_dma_off(drive);
	}

	if ((pc->flags & PC_FLAG_DMA_OK) &&
	    (drive->dev_flags & IDE_DFLAG_USING_DMA)) {
		if (scsi)
			hwif->sg_mapped = 1;
		drive->dma = !hwif->dma_ops->dma_setup(drive);
		if (scsi)
			hwif->sg_mapped = 0;
	}

	if (!drive->dma)
		pc->flags &= ~PC_FLAG_DMA_OK;

	ide_pktcmd_tf_load(drive, scsi ? 0 : IDE_TFLAG_OUT_DEVICE, bcount,
			   drive->dma);

	/* Issue the packet command */
	if (drive->atapi_flags & IDE_AFLAG_DRQ_INTERRUPT) {
		ide_execute_command(drive, ATA_CMD_PACKET, ide_transfer_pc,
				    timeout, NULL);
		return ide_started;
	} else {
		ide_execute_pkt_cmd(drive);
		return ide_transfer_pc(drive);
	}
}
EXPORT_SYMBOL_GPL(ide_issue_pc);