path: root/arch/mn10300/Kconfig

#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#

mainmenu "Linux Kernel Configuration"

config MN10300
	def_bool y

config AM33
	def_bool y

config MMU
	def_bool y

config HIGHMEM
	def_bool n

config NUMA
	def_bool n

config UID16
	def_bool y

config RWSEM_GENERIC_SPINLOCK
	def_bool y

config RWSEM_XCHGADD_ALGORITHM
	bool

config GENERIC_HARDIRQS_NO__DO_IRQ
	def_bool y

config GENERIC_CALIBRATE_DELAY
	def_bool y

config GENERIC_FIND_NEXT_BIT
	def_bool y

config GENERIC_HWEIGHT
	def_bool y

config GENERIC_TIME
	def_bool y

config GENERIC_BUG
	def_bool y

config QUICKLIST
	def_bool y

config ARCH_HAS_ILOG2_U32
	def_bool y

# Use the generic interrupt handling code in kernel/irq/
config GENERIC_HARDIRQS
	def_bool y

config HOTPLUG_CPU
	def_bool n

config HZ
	int
	default 1000

mainmenu "Matsushita MN10300/AM33 Kernel Configuration"

source "init/Kconfig"

source "kernel/Kconfig.freezer"


menu "Matsushita MN10300 system setup"

choice
	prompt "Unit type"
	default MN10300_UNIT_ASB2303
	help
	  This option specifies board for which the kernel will be
	  compiled. It affects the external peripherals catered for.

config MN10300_UNIT_ASB2303
	bool "ASB2303"

config MN10300_UNIT_ASB2305
	bool "ASB2305"

endchoice

choice
	prompt "Processor support"
	default MN10300_PROC_MN103E010
	help
	  This option specifies the processor for which the kernel will be
	  compiled. It affects the on-chip peripherals catered for.

config MN10300_PROC_MN103E010
	bool "MN103E010"
	depends on MN10300_UNIT_ASB2303 || MN10300_UNIT_ASB2305
	select MN10300_PROC_HAS_TTYSM0
	select MN10300_PROC_HAS_TTYSM1
	select MN10300_PROC_HAS_TTYSM2

endchoice

choice
	prompt "Processor core support"
	default MN10300_CPU_AM33V2
	help
	  This option specifies the processor core for which the kernel will be
	  compiled. It affects the instruction set used.

config MN10300_CPU_AM33V2
	bool "AM33v2"

endchoice

config FPU
	bool "FPU present"
	default y
	depends on MN10300_PROC_MN103E010

choice
	prompt "CPU Caching mode"
	default MN10300_CACHE_WBACK
	help
	  This option determines the caching mode for the kernel.

	  Write-Back caching mode involves the all reads and writes causing
	  the affected cacheline to be read into the cache first before being
	  operated upon. Memory is not then updated by a write until the cache
	  is filled and a cacheline needs to be displaced from the cache to
	  make room. Only at that point is it written back.

	  Write-Through caching only fetches cachelines from memory on a
	  read. Writes always get written directly to memory. If the affected
	  cacheline is also in cache, it will be updated too.

	  The final option is to turn of caching entirely.

config MN10300_CACHE_WBACK
	bool "Write-Back"

config MN10300_CACHE_WTHRU
	bool "Write-Through"

config MN10300_CACHE_DISABLED
	bool "Disabled"

endchoice

menu "Memory layout options"

config KERNEL_RAM_BASE_ADDRESS
	hex "Base address of kernel RAM"
	default "0x90000000"

config INTERRUPT_VECTOR_BASE
	hex "Base address of vector table"
	default "0x90000000"
	help
	  The base address of the vector table will be programmed into
          the TBR register. It must be on 16MiB address boundary.

config KERNEL_TEXT_ADDRESS
	hex "Base address of kernel"
	default "0x90001000"

config KERNEL_ZIMAGE_BASE_ADDRESS
	hex "Base address of compressed vmlinux image"
	default "0x90700000"

endmenu

config PREEMPT
	bool "Preemptible Kernel"
	help
	  This option reduces the latency of the kernel when reacting to
	  real-time or interactive events by allowing a low priority process to
	  be preempted even if it is in kernel mode executing a system call.
	  This allows applications to run more reliably even when the system is
	  under load.

	  Say Y here if you are building a kernel for a desktop, embedded
	  or real-time system.  Say N if you are unsure.

config MN10300_CURRENT_IN_E2
	bool "Hold current task address in E2 register"
	default y
	help
	  This option removes the E2/R2 register from the set available to gcc
	  for normal use and instead uses it to store the address of the
	  current process's task_struct whilst in the kernel.

	  This means the kernel doesn't need to calculate the address each time
	  "current" is used (take SP, AND with mask and dereference pointer
	  just to get the address), and instead can just use E2+offset
	  addressing each time.

	  This has no effect on userspace.

config MN10300_USING_JTAG
	bool "Using JTAG to debug kernel"
	default y
	help
	  This options indicates that JTAG will be used to debug the kernel. It
	  suppresses the use of certain hardware debugging features, such as
	  single-stepping, which are taken over completely by the JTAG unit.

config MN10300_RTC
	bool "Using MN10300 RTC"
	depends on MN10300_PROC_MN103E010
	default n
	help

	  This option enables support for the RTC, thus enabling time to be
	  tracked, even when system is powered down. This is available on-chip
	  on the MN103E010.

config MN10300_WD_TIMER
	bool "Using MN10300 watchdog timer"
	default y
	help
	  This options indicates that the watchdog timer will be used.

config PCI
	bool "Use PCI"
	depends on MN10300_UNIT_ASB2305
	default y
	help
	  Some systems (such as the ASB2305) have PCI onboard. If you have one
	  of these boards and you wish to use the PCI facilities, say Y here.

	  The PCI-HOWTO, available from
	  <http://www.tldp.org/docs.html#howto>, contains valuable
	  information about which PCI hardware does work under Linux and which
	  doesn't.

source "drivers/pci/Kconfig"

source "drivers/pcmcia/Kconfig"

menu "MN10300 internal serial options"

config MN10300_PROC_HAS_TTYSM0
	bool
	default n

config MN10300_PROC_HAS_TTYSM1
	bool
	default n

config MN10300_PROC_HAS_TTYSM2
	bool
	default n

config MN10300_TTYSM
	bool "Support for ttySM serial ports"
	depends on MN10300
	default y
	select SERIAL_CORE
	help
	  This option enables support for the on-chip serial ports that the
	  MN10300 has available.

config MN10300_TTYSM_CONSOLE
	bool "Support for console on ttySM serial ports"
	depends on MN10300_TTYSM
	select SERIAL_CORE_CONSOLE
	help
	  This option enables support for a console on the on-chip serial ports
	  that the MN10300 has available.

#
# /dev/ttySM0
#
config MN10300_TTYSM0
	bool "Enable SIF0 (/dev/ttySM0)"
	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM0
	help
	  Enable access to SIF0 through /dev/ttySM0 or gdb-stub

choice
	prompt "Select the timer to supply the clock for SIF0"
	default MN10300_TTYSM0_TIMER8
	depends on MN10300_TTYSM0

config MN10300_TTYSM0_TIMER8
	bool "Use timer 8 (16-bit)"

config MN10300_TTYSM0_TIMER2
	bool "Use timer 2 (8-bit)"

endchoice

#
# /dev/ttySM1
#
config MN10300_TTYSM1
	bool "Enable SIF1 (/dev/ttySM1)"
	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM1
	help
	  Enable access to SIF1 through /dev/ttySM1 or gdb-stub

choice
	prompt "Select the timer to supply the clock for SIF1"
	default MN10300_TTYSM0_TIMER9
	depends on MN10300_TTYSM1

config MN10300_TTYSM1_TIMER9
	bool "Use timer 9 (16-bit)"

config MN10300_TTYSM1_TIMER3
	bool "Use timer 3 (8-bit)"

endchoice

#
# /dev/ttySM2
#
config MN10300_TTYSM2
	bool "Enable SIF2 (/dev/ttySM2)"
	depends on MN10300_TTYSM && MN10300_PROC_HAS_TTYSM2
	help
	  Enable access to SIF2 through /dev/ttySM2 or gdb-stub

choice
	prompt "Select the timer to supply the clock for SIF2"
	default MN10300_TTYSM0_TIMER10
	depends on MN10300_TTYSM2

config MN10300_TTYSM2_TIMER10
	bool "Use timer 10 (16-bit)"

endchoice

config MN10300_TTYSM2_CTS
	bool "Enable the use of the CTS line /dev/ttySM2"
	depends on MN10300_TTYSM2

endmenu

source "mm/Kconfig"

menu "Power management options"
source kernel/power/Kconfig
endmenu

endmenu


menu "Executable formats"

source "fs/Kconfig.binfmt"

endmenu

source "net/Kconfig"

source "drivers/Kconfig"

source "fs/Kconfig"

source "arch/mn10300/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"

source "arch/mn10300/oprofile/Kconfig"