blob: 63c659800c0320a9b08a8878fcb3ab327f270d9f (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
GPIO controlled regulators
Required properties:
- compatible : Must be "regulator-gpio".
- states : Selection of available voltages and GPIO configs.
if there are no states, then use a fixed regulator
Optional properties:
- enable-gpio : GPIO to use to enable/disable the regulator.
- gpios : GPIO group used to control voltage.
- startup-delay-us : Startup time in microseconds.
- enable-active-high : Polarity of GPIO is active high (default is low).
Any property defined as part of the core regulator binding defined in
regulator.txt can also be used.
Example:
mmciv: gpio-regulator {
compatible = "regulator-gpio";
regulator-name = "mmci-gpio-supply";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2600000>;
regulator-boot-on;
enable-gpio = <&gpio0 23 0x4>;
gpios = <&gpio0 24 0x4
&gpio0 25 0x4>;
states = <1800000 0x3
2200000 0x2
2600000 0x1
2900000 0x0>;
startup-delay-us = <100000>;
enable-active-high;
};
|
