blob: 2246bc5c874b7a8c5e1523682e98b9d848fccc00 (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
Binding for TI/National Semiconductor LP8727 Charger
Required properties:
- compatible: "ti,lp8727"
- reg: I2C slave address 27h
Optional properties:
- interrupt-parent: interrupt controller node (see interrupt binding[0])
- interrupts: interrupt specifier (see interrupt binding[0])
- debounce-ms: interrupt debounce time. (u32)
AC and USB charging parameters
- charger-type: "ac" or "usb" (string)
- eoc-level: value of 'enum lp8727_eoc_level' (u8)
- charging-current: value of 'enum lp8727_ichg' (u8)
[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
Example)
lp8727@27 {
compatible = "ti,lp8727";
reg = <0x27>;
/* GPIO 134 is used for LP8728 interrupt pin */
interrupt-parent = <&gpio5>; /* base = 128 */
interrupts = <6 0x2>; /* offset = 6, falling edge type */
debounce-ms = <300>;
/* AC charger: 5% EOC and 500mA charging current */
ac {
charger-type = "ac";
eoc-level = /bits/ 8 <0>;
charging-current = /bits/ 8 <4>;
};
/* USB charger: 10% EOC and 400mA charging current */
usb {
charger-type = "usb";
eoc-level = /bits/ 8 <1>;
charging-current = /bits/ 8 <2>;
};
};
|
