aboutsummaryrefslogtreecommitdiffstats
path: root/sound/soc/codecs/twl4030.c
Commit message (Collapse)AuthorAge
* ASoC: TWL4030: Fix for capture mixer stringsPeter Ujfalusi2009-08-14
| | | | | | | | | Change the strings related to capture in order to be interpreted correctly by alsamixer and possible other UI based mixer applications. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Introduce PGAs for outputsPeter Ujfalusi2009-08-13
| | | | | | | | | | | | | | Dynamically control and control only the needed output amplifier muting/un-muting. The original code was muting and un-muting the following output amplifiers: Earpiece PreDrivL/R, CarkitL/R at the same time regardless which pin is actually in use at the given moment. Move these as separate PGA so only the needed amplifier will be touched. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add tristate callbacks for HiFi and VoiceLopez Cruz, Misael2009-07-03
| | | | | | | | | | Add "set_tristate" callbacks for HiFi and Voice DAIs. Machine drivers can enable and disable tristate for each DAI with "snd_soc_dai_set_tristate" function. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add EXTMUTE to reduce pop-noise effectCandelaria Villareal, Jorge2009-07-02
| | | | | | | | | | | | | | | | | | | | | | According to TRM, an external FET controlled by a 1.8V output signal can be used to reduce the pop-noise heard when the audio amplifier is switched on. It is suggested that GPIO6 of TWL4030 be used, but any other gpio can be used instead. This is indicated in machine driver with the following twl4030_setup_data members: -hs_extmute. Set to 1 if board has support for EXTMUTE. -set_hs_extmute. Set to a callback funcion to control an external gpio line. Set to NULL if MUTE[GPIO6] pin is used. Codec driver takes care of enabling and disabling this output during the headset pop attenuation sequence. Also add a delay to let VMID settle in ramp up sequence. Signed-off-by: Jorge Eduardo Candelaria <x0107209@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Remove word "Switch" from Handsfree switch nameLopez Cruz, Misael2009-06-26
| | | | | | | | | | SoC dapm adds the suffix "Switch" to SND_SOC_DAPM_SWITCH controls, removing word "Switch" from HandsfreeL/HandsfreeR widget name for avoiding to duplicate it. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Correct bypass event for voice sidetoneLopez Cruz, Misael2009-06-23
| | | | | | | | | | | | Event for voice sidetone was being interpreted as an analog HiFi bypass event because VSTPGA register offset is less than ARXR2_APGA_CTL offset. Reordering the register checks allows to handle voice digital bypass event properly. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add AVADC Clock PriorityLopez Cruz, Misael2009-06-23
| | | | | | | | | | AVDAC clk priority allows to determine the path ADC must be connected when the codec is in option2 and both HiFi and Voice paths are enabled. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Fix voice interface clock mastersLopez Cruz, Misael2009-06-22
| | | | | | | | | Voice interface of twl4030 codec supports: CBM_CFM and CBS_CFS. It doesn't support CBS_CFM. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-By: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Staticise put_twl4030_opmode_enum_double()Mark Brown2009-06-20
| | | | | | It's an operation for a control and doesn't need to be exported. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix shadowed variables in twl4030Mark Brown2009-06-20
| | | | | | | | No need to define second copies of mode and format, they're declared with exactly the same type at the head of the function and there's no conflict in their use. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Fix build error in twl4030.cTakashi Iwai2009-06-04
| | | | | | | | | Fix the (likely cut-n-paste) error by commit 16a30fbb0d3aa4ee829a2dd3d0e314e2b5ae96a9, which causes the error below: sound/soc/codecs/twl4030.c: In function 'twl4030_read_reg_cache': sound/soc/codecs/twl4030.c:152: error: 'cache' undeclared (first use in this function) Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ASoC: TWL4030: Check the interface format for 4 channel modePeter Ujfalusi2009-06-01
| | | | | | | | | In addition to the operating mode check, also check the codec's interface format in case of four channel mode. If the codec is not in TDM (DSP_A) mode, return with error. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Use reg_cache in twl4030_init_chipPeter Ujfalusi2009-05-29
| | | | | | | | Use the codec->reg_cache instead of the array directly in twl4030_init_chip for setting the default values. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: HandsfreeL/R mute DAPM switchPeter Ujfalusi2009-05-25
| | | | | | | | | Add DAPM switch for HeadsetL/R mute. Since all bits are are needed for the HFL/R pop removal to work the switch is using the SW_SHADOW no HW register for the HandsfreeL/R mute. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add shadow registerPeter Ujfalusi2009-05-25
| | | | | | | | Shadow, non HW register for dealing with the HandsfreeL/R muting. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Handsfree pop removal redesignPeter Ujfalusi2009-05-25
| | | | | | | | | | | Move the HandsfreeL/R (IHFL/R) pop removal code from the DAPM_MUX_E to a more appropriate DAPM_PGA_E widget. Also fix the power-up sequence to match with the TRM. The power-down sequence is not described in the TRM, so do it in a way, which seams like the correct sequence. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Differentiate the playback streamsPeter Ujfalusi2009-05-22
| | | | | | | | Give unique stream names for the two playback streams so DAPM can figure out which codec_dai is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add support for platform dependent configurationPeter Ujfalusi2009-05-22
| | | | | | | | | | | twl4030_setup_data structure can be passed from platform drivers to the codec via the snd_soc_device->codec_data pointer. Currently the setup data has support for the Headset pop-removal related configuration, which differs from board to board. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Move the Headset pop-attenuation code to PGA eventPeter Ujfalusi2009-05-20
| | | | | | | | | | | | | | | This patch adds SND_SOC_DAPM_PGA_E to the headset path, which handles the headset ramp up and down sequences needed for the pop noise removal. With this patch the order of the internal components in the twl4030 codec is turned on and off in a correct order. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Change DAPM routings and controls for DACs and PGAsPeter Ujfalusi2009-05-20
| | | | | | | | | | | | | | | | | | | | | | | Restructuring the twl4030 codec's DAPM routing to be able to handle the power sequences correctly. The twl4030 codec internal implementation have this order: DAC -> Analog PGA -> Mixer/Mux While the ASoC framework expects the following order: DAC -> Mixer -> Analog PGA This patch moves the Analog PGA handling from SND_SOC_DAPM_PGA to _MIXER and adds two levels of mixer to handle the digital and analog loopback functionality. Now the analog loopback does not powers on any of the DACs. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Tested-by: Anuj Aggarwal <anuj.aggarwal@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Tested-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add control for selecting codec operation modeLopez Cruz, Misael2009-05-19
| | | | | | | | | | | | | | Add a control for selecting the codec operation mode. TWL4030 codec has two modes: - Option 1. Audio only (4 audio DACs) - Option 2. Voice/Audio (2 audio DACs and voice ADC/DAC) Control is restricted when a stream is ongoing, since codec's operation mode cannot be changed on-the-fly. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujflausi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Fix Analog capture path for AUXRPeter Ujfalusi2009-05-19
| | | | | | | AUXR is selected by bit 2 and not by bit 1 in the ANAMICR register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Enable/disable voice digital filtersMisael Lopez Cruz2009-05-18
| | | | | | | | | | | | Enable TWL4030 VTXL/VTXR and VRX digital filters for uplink and downlink paths, respectively. This patch also corrects voice 8/16kHz mode selection bit (SEL_16K) of CODEC_MODE register. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: change DAPM for analog microphone selectionJoonyoung Shim2009-05-12
| | | | | | | | | | | The inputs of the twl4030 codec can be mixed, so we will use the mixer DAPM for the analog microphone registers(0x05, 0x06), but if we enable more than one input at the same time, the input impedance of the input amplifier will be reduced. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Fix typo in twl4030_codec_mute functionPeter Ujfalusi2009-05-08
| | | | | | | | | Copy-paste error: TWL4030_PRECKL_GAIN >> TWL4030_PRECKR_GAIN It has not caused problems, since TWL4030_PRECKL_GAIN == TWL4030_PRECKR_GAIN == 0x30 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add VIBRA outputPeter Ujfalusi2009-05-05
| | | | | | | | | | | This patch adds support for the VIBRA output on TWL4030 codec. The VIBRA output can be driven with audio data or with local vibrator driver. Add the needed DAPM elements and routes for the VIBRA output and controls for the VIBRA driver configuration. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add voice digital loopback: sidetoneLopez Cruz, Misael2009-05-05
| | | | | | | | | | | This patch add voice digital loopback (sidetone) to the twl4030 driver. It mixes voice uplink attenuated (by sidetone gain) with voice downlink when the codec is working in option2 (voice/audio mode). Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add VDL analog bypassLopez Cruz, Misael2009-05-05
| | | | | | | | | | | | This patch adds voice downlink analog bypass switch. It follows the same approach as in other analog bypass switches. DAC switch is moved from 'DAC Voice' to 'Analog Voice Playback Mixer', that will also allow voice DAC to be powered in digital voice loopback (sidetone). Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'for-2.6.30' into for-2.6.31Mark Brown2009-04-28
|\
| * ASoC: TWL4030: Fix gain control for earpiece amplifierJoonyoung Shim2009-04-28
| | | | | | | | | | | | | | | | | | The gain control for earpiece amplifier uses 0dB ~ 12dB according to the TRM, but the present code is implemented to -6dB ~ 6dB. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: TWL4030: Add 4 channel TDM supportPeter Ujfalusi2009-04-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for 4 channel TDM (SND_SOC_DAIFMT_DSP_A) for twl4030 codec. The channel allocations are: Playback: TDM i2s TWL RX Channel 1 Left SDRL2 Channel 3 Right SDRR2 Channel 2 -- SDRL1 Channel 4 -- SDRR1 Capture: TDM i2s TWL TX Channel 1 Left TXL1 Channel 3 Right TXR1 Channel 2 -- TXL2 Channel 4 -- TXR2 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: TWL4030: Add VDL path supportJoonyoung Shim2009-04-23
| | | | | | | | | | | | | | | | | | | | Add DAPMs for VDL(Voice Down Link) path. To support VDL path, we have to change DAPMs of outputs(Earpiece, PreDrive Left/Right, Headset Left/Right, Carkit Left/Right) from mux to mixer. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: TWL4030: Add support Voice DAIJoonyoung Shim2009-04-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add Voice DAI to support the PCM voice interface of the twl4030 codec. The PCM voice interface can be used with 8-kHz(voice narrowband) or 16-kHz(voice wideband) sampling rates, and 16bits, and mono RX and mono TX or stereo TX. The PCM voice interface has two modes - PCM mode1 : This uses the normal FS polarity and the rising edge of the clock signal. - PCM mode2 : This uses the FS polarity inverted and the falling edge of the clock signal. If the system master clock is not 26MHz or the twl4030 codec mode is not option2, the voice PCM interface is not available. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | ASoC: TWL4030: Fix for the constraint handlingPeter Ujfalusi2009-04-17
|/ | | | | | | | | | | | | | | | | | | | | | The original implementation of the constraints were good against sane applications. If the opening sequence is: stream1_open, stream1_hw_params, stream2_open, stream2_hw_params -> the constraints are set correctly for stream2. But if the sequence is: stream1_open, stream2_open, stream2_hw_params, stream1_hw_params -> than stream2 would receive constraint rate = 0, sample_bits = 0, since the stream1 has not yet called hw_params... The command to trigger this event: gst-launch-0.10 alsasrc device=hw:0 ! alsasink device=hw:0 sync=false This patch does some 'black magic' in order to always set the correct constraints and sets it only when it is needed for the other stream. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Compillation error fixPeter Ujfalusi2009-04-07
| | | | | | | Fix for compillation error introduced by the constrain patch. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add actual support for 96KHz playback supportPeter Ujfalusi2009-04-03
| | | | | | | Adds the needed code to be able to use 96KHz playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add constrains for second streamPeter Ujfalusi2009-04-02
| | | | | | | | | In case of duplex mode (capture and playback at the same time), the second stream has to have the same parameters (rate, sample size) as the already running stream. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: 96KHz playback supportPeter Ujfalusi2009-04-02
| | | | | | | TWL4030 supports 96KHz sample playback, but only playback. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: twl4030 - Fix build errorJoonyoung Shim2009-03-16
| | | | | | | | | | | | | | | | | | | | CC sound/soc/codecs/twl4030.o sound/soc/codecs/twl4030.c:1400: warning: braces around scalar initializer sound/soc/codecs/twl4030.c:1400: warning: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1401: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1401: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1401: warning: initialization from incompatible pointer type sound/soc/codecs/twl4030.c:1402: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1402: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1402: warning: excess elements in scalar initializer sound/soc/codecs/twl4030.c:1402: warning: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1403: error: field name not in record or union initializer sound/soc/codecs/twl4030.c:1403: error: (near initialization for 'twl4030_dai.ops') sound/soc/codecs/twl4030.c:1403: warning: excess elements in scalar initializer sound/soc/codecs/twl4030.c:1403: warning: (near initialization for 'twl4030_dai.ops') Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Make the HS ramp delay configurablePeter Ujfalusi2009-03-06
| | | | | | | Enum type for selecting the desired ramp delay for the headset output. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add digital loopback supportPeter Ujfalusi2009-02-18
| | | | | | | | | | | | | | | This patch adds the digital loopback/bypass support for twl4030 codec. The digital loopback will let the digimic0 (routed in the TX1 capture path inside of TWL4030) data to be routed back to the RX2 playback path (I2S stereo). It can also route the analog capture date routed through the TX1 back to RX2. Effectively the digital loopback is routing the audio from the TX1 capture path to the RX2 playback path. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Add analog loopback supportPeter Ujfalusi2009-01-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the analog loopback/bypass support for twl4030 codec. Details for the implementation: It seams that the analog loopback needs the DAC powered on on the channel, where the loopback is selected. The switch for the DACs has been moved from the DAPM_DAC to the "Analog XX Playback Mixer". In this way the DAC will be powered while the audio playback is used or/and the loopback is enabled for the channel. The twl4030 codec powering has been reworked. Now the codec will be powered as long as it does not receives the SND_SOC_BIAS_OFF event. The exceptions are when the given change in the registers needs the codec power down/up cycle in order to take effect. Otherwise the codec is on. When the codec enters to STANDBY state and none of the loopback paths are enabled, than the amplifiers, which are no in the DAPM path are forced to turn off and the PLL is disabled. When playback/capture starts the disabled gains are restored and the PLL is enabled. When one of the loopback enabled in STANDBY mode, the disabled gains are restored and the PLL is enabled also. In short: the codec always goes to the lowest power state based on the bias_level and the bypass_state. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Move the twl4030_power_up and _power_down functionPeter Ujfalusi2009-01-27
| | | | | | | | Move the twl4030_power_up and twl4030_power_down function earlier to facilitate the analog bypass implementation. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Physical ADC and amplifier power switch changePeter Ujfalusi2009-01-27
| | | | | | | | | Change the power switches for the physical ADC and for the amplifiers for the analog capture path to map more closely the actual path inside of the codec. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Enable Headset Left anti-pop/bias ramp only if the Headset ↵Peter Ujfalusi2009-01-27
| | | | | | | | | | | Left is in use The Headset Left anti-pop and bias ramp does not need to be enabled, if the headset is not in use. Move the code to DAPM event handler for HeadsetL. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Code clean up for codec power up and downPeter Ujfalusi2009-01-27
| | | | | | | | Merge the codec up and down functions to a simple one. Codec is powered down by default (reg_cache change). Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: TWL4030: Syncronize the reg_cache for ANAMICL after the offset cancelationPeter Ujfalusi2009-01-27
| | | | | | | | | The offset cancelation bit in ANAMICL register is self cleanig. Make sure that the reg_cache holds the same value as the HW register. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: Push the codec runtime storage into the card structureMark Brown2009-01-27
| | | | | | | This is a further stage on the road to refactoring away the ASoC platform device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* ASoC: fixes to caching implementationsIan Molton2009-01-19
| | | | | | | | This patch takes fixes a number of bugs in the caching code used by several ASoC codec drivers. Mostly off-by-one fixes. Signed-off-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge branch 'for-2.6.29' into for-2.6.30Mark Brown2009-01-09
|\
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 19:02:41 -0500