aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci/bt87x.c
Commit message (Collapse)AuthorAge
* ALSA: Include linux/io.h instead of asm/io.hTakashi Iwai2015-01-28
| | | | | | Nowadays it's recommended. Replace all in a shot. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Deletion of checks before the function call "iounmap"Markus Elfring2015-01-04
| | | | | | | | | | The iounmap() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine2014-08-12
| | | | | | | | | | | | | | | | | | | | | | | | | We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
* arch: Mass conversion of smp_mb__*()Peter Zijlstra2014-04-18
| | | | | | | | | | | Mostly scripted conversion of the smp_mb__* barriers. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/n/tip-55dhyhocezdw1dg7u19hmh1u@git.kernel.org Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: linux-arch@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
* ALSA: bt87x: Use standard printk helpersTakashi Iwai2014-02-26
| | | | | | Convert with dev_err() and co from snd_printk(), etc. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: Convert to snd_card_new() with a device pointerTakashi Iwai2014-02-12
| | | | | | Also remove superfluous snd_card_set_dev() calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at removeTakashi Iwai2013-05-29
| | | | | | | | | | | | | As drvdata is cleared to NULL at probe failure or at removal by the driver core, we don't have to call pci_set_drvdata(pci, NULL) any longer in each driver. The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in hda_intel.c. Since this function itself releases the card instance, we need to clear drvdata here as well, so that it won't be released doubly in the remove callback. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bt87x: Make load_all parameter working againTakashi Iwai2013-02-25
| | | | | | | | | | | Along with a clean up commit [e9f66d9b9: ALSA: pci: clean up using module_pci_driver()], bt87x driver lost the functionality of load_all parameter. This patch does a partial revert of the commit only for bt87x.c to recover it. Reported-by: Clemens Ladisch <cladisch@googlemail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bt87X: remove __dev* attributesBill Pemberton2012-12-07
| | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: pci: clean up using module_pci_driver()Takashi Iwai2012-04-24
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: module_param: make bool parameters really boolRusty Russell2011-12-19
| | | | | | | | | | | | module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: fix drivers needing module.h not moduleparam.hPaul Gortmaker2011-10-31
| | | | | | | | | The implicit presence of module.h lured several users into incorrectly thinking that they only needed/used modparam.h but once we clean up the module.h presence, these will show up as build failures, so fix 'em now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*Takashi Iwai2011-06-10
| | | | | | | | | The name argument of request_irq() appears in /proc/interrupts, and it's quite ugly when the name entry contains a space or special letters. In general, it's simpler and more readable when the module name appears there, so let's replace all entries with KBUILD_MODNAME. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Use KBUILD_MODNAME for pci_driver.name entriesTakashi Iwai2011-06-10
| | | | | | | | | | | | The convention for pci_driver.name entry in kernel drivers seem to be the module name or equivalent ones. But, so far, almost all PCI sound drivers use more verbose name like "ABC Xyz (12)", and these are fairly confusing when appearing as a file name. This patch converts the all pci_driver.name entries in sound/pci/* to use KBUILD_MODNAME for more unified appearance. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bt87x: use enum control info helperClemens Ladisch2011-01-10
| | | | | | | Simplify the info callback by using the snd_ctl_enum_info() helper function. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* sound: use DEFINE_PCI_DEVICE_TABLEAlexey Dobriyan2010-02-09
| | | | | | | | | Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to .devinit.rodata section, so they can be discarded in some cases, and make them const. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bt87x - Add a whitelist for Pinnacle PCTV (11bd:0012)Takashi Iwai2009-10-13
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: bt87x - Add a quirk entry for Askey Computer Corp. MagicTView'99Takashi Iwai2009-06-02
| | | | Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some driversTakashi Iwai2009-04-28
| | | | | | | Added SNDRV_PCM_INFO_BATCH flag to PCM info field of some drivers that really don't give the precise pointer value. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Convert to snd_card_create() in sound/pci/*Takashi Iwai2009-01-12
| | | | | | | Convert from snd_card_new() to the new snd_card_create() function in sound/pci/*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* pci: use pci_ioremap_bar() in sound/Arjan van de Ven2008-10-21
| | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in sound/. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* ALSA: Clean up SG-buffer helper functions and macrosTakashi Iwai2008-08-25
| | | | | | | | Clean up SG-buffer helper functions and macros. Helpers take substream as arguments now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] bt87X: fix freeing of shared interruptClemens Ladisch2008-02-22
| | | | | | | | | Call free_irq() after iounmap() because other devices could trigger our shared interrupt handler. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [ALSA] Remove sound/driver.hTakashi Iwai2008-01-31
| | | | | | | | | | | | This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] snd-bt87x: Make the load_all option work correctlyTrent Piepho2007-10-23
| | | | | | | | | | | | | If the load_all option was turned on all cards would be treated as unknown, even those which are in the database. Of course, if the card is in the database there is no reason to use the load_all option. It's there to force loading when the card isn't in the database. But there are out of date wikis that say to do this and some distros might turn this option on by default. So, we keep the load_all option from turning known cards into unknown cards. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] bt87x - Fix section mismatchTakashi Iwai2007-10-23
| | | | | | | | const and __devinit aren't a good pair, resulting in a section mismatch error. Let's remove const as a temporary solution. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
* [ALSA] bt87x: fix detection of generic boardsClemens Ladisch2007-10-16
| | | | | | | | Add an 'unknown' board type so that it is possible to differentiate between unknown and generic boards. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] snd-bt87x: Power down audio ADC when not in useTrent Piepho2007-10-16
| | | | | | | | | Sets a bit to power down the Bt87x's internal audio ADC when the ALSA device isn't open, or when it is in 'digital mode' using an external ADC. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] snd-bt87x: Improve support for different board typesTrent Piepho2007-10-16
| | | | | | | | | | | | | | | | | | | | | | | | | | Different cards have different audio configurations, but the driver didn't support this. The only setting it had was the digital rate. This patch adds a board configuration list. Currently, configurable items are the digital rate and the digital data format (for cards with an external ADC), a flag for the absence of an external ADC, and a flag for no connection to the Bt87x internal ADC. This allows cards that don't use the internal ADC to omit the ALSA 'Bt87x analog' device and related controls. Cards without an external ADC can omit the 'Bt87x digital' device. In order to support the CS5331A ADC used on the Osprey 440 and 2x0 cards, the digital format needs to be different than the default. Support could be added for defining: The connections or lack of them to the Bt87x's internal ADC mux Multiple sample rates for an external ADC (e.g. Osprey) Control of an external mux for an external ADC (e.g. Osprey) The card definitions for cards other than the Ospreys are kept equivalent to their old values. This is likely inaccurate for most cards, as it is doubtful that both an external and the internal ADC would be used. Lacking information on those cards, the behavior is left unchanged. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] bt87x - Add known PCI ID entriesTakashi Iwai2007-10-16
| | | | | | | | | Added the PCI ID entries for known working devices - Prolink PixelView PV-M4900 - Pinnacle Studio PCTV rave Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] pcm: add snd_pcm_rate_to_rate_bit() helperClemens Ladisch2007-10-16
| | | | | | | | Add a snd_pcm_rate_to_rate_bit() function to factor out common code used by several drivers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] Clean up with common snd_ctl_boolean_*_info callbacksTakashi Iwai2007-10-16
| | | | | | | Clean up codes using the new common snd_ctl_boolean_*_info() callbacks. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* long vs. unsigned long - low-hanging fruits in driversAl Viro2007-10-14
| | | | | | | deal with signedness of the stuff passed to set_bit() et.al. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 supportTrent Piepho2007-07-30
| | | | | | | | | | | | | | | | | | | | | | | Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* [ALSA] Fix alsa-devel ML addressRene Herman2007-05-11
| | | | | | | | | | This replaces all occurences of alsa-devel@lists.s[ource]f[orge].net that a simple recursive grep found in the current HG ALSA repos by alsa-devel@alsa-project.org. Signed-off-by: Rene Herman <rene.herman@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] bt87x - Add ATI TV-Wonder to the supported listTakashi Iwai2007-05-11
| | | | | | | Added ATI TV-Wonder (1002:0001) to the supported list. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* V4L/DVB (5061): Bt8xx: add support for Ultraview DVB-T LiteMichael Krufky2007-02-21
| | | | | | | Ultraview DVB-T Lite is a clone of DViCO FusionHDTV DVB-T Lite Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* [ALSA] Remove IRQF_DISABLED for shared PCI irqsTakashi Iwai2006-12-20
| | | | | | | | | | | | Fix IRQ flags for PCI devices. The shared IRQs for PCI devices shouldn't be allocated with IRQF_DISABLED. Also, when MSI is enabled, IRQF_SHARED shouldn't be used. The patch removes unnecessary cast in request_irq and free_irq, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] use the ALIGN macroClemens Ladisch2006-12-20
| | | | | | | Use the ALIGN macro instead of manual calculations. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [ALSA] Fix section mismatch errors in ALSA PCI driversTakashi Iwai2006-07-12
| | | | | | | | | Fixed 'section mismatch' errors in ALSA PCI drivers: - removed invalid __devinitdata from pci id tables - fix/remove __devinit of functions called in suspend/resume Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [PATCH] irq-flags: sound: Use the new IRQF_ constantsThomas Gleixner2006-07-02
| | | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] 64bit resource: fix up printks for resources in sound driversGreg Kroah-Hartman2006-06-27
| | | | | | | | | | This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [ALSA] bt87x: add Voodoo TV 200 whitelist entryClemens Ladisch2006-06-22
| | | | | | This adds a whitelist entry for the digital audio input of the Voodoo TV 200. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] Remove zero-initialization of static variablesTakashi Iwai2006-06-22
| | | | | | | Removed zero-initializations of static variables. A tiny optimization. Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] add __devinitdata to all pci_device_idHenrik Kretzschmar2006-04-27
| | | | | Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
* [ALSA] bt87x: add more DVB card IDsClemens Ladisch2006-03-22
| | | | | | | | | Modules: BT87x driver Add more PCI subsystem IDs of DVB cards to the blacklist of cards the driver is to ignore. Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
* [ALSA] bt848 - added Leadtek Winfast tv 2000xp delux to whitelistJaroslav Kysela2006-03-22
| | | | | | | | | Modules: BT87x driver - added 0x107d:0x6606 to whitelist - print also the pci device ID for developers when model is not known Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] bt87x - fix detection of unknown cardJaroslav Kysela2006-01-22
| | | | | | Modules: BT87x driver Signed-off-by: Jaroslav Kysela <perex@suse.cz>
* [ALSA] bt87x - Fix the unability of snd-bt87x to recognize AVerMedia StudioMartin Drab2006-01-22
| | | | | | | | | | | Modules: BT87x driver The patch siply adds the PCI IDs of AVerMedia Studio No. 103, 203, and possibly even other versions with the same PCI IDs to the snd-bt87x driver and sets its default sampling rate to 48 kHz. Signed-off-by: Martin Drab <drab@kepler.fjfi.cvut.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-16 02:10:42 -0500