aboutsummaryrefslogtreecommitdiffstats
path: root/net/xfrm/xfrm_input.c
Commit message (Collapse)AuthorAge
* xfrm: Override skb->mark with tunnel->parm.i_key in xfrm_inputAlexander Duyck2015-05-28
| | | | | | | | | This change makes it so that if a tunnel is defined we just use the mark from the tunnel instead of the mark from the skb header. By doing this we can avoid the need to set skb->mark inside of the tunnel receive functions. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* xfrm: fix xfrm_input/xfrm_tunnel_check oopsAlexey Dobriyan2015-04-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | https://bugzilla.kernel.org/show_bug.cgi?id=95211 Commit 70be6c91c86596ad2b60c73587880b47df170a41 ("xfrm: Add xfrm_tunnel_skb_cb to the skb common buffer") added check which dereferences ->outer_mode too early but larval SAs don't have this pointer set (yet). So check for tunnel stuff later. Mike Noordermeer reported this bug and patiently applied all the debugging. Technically this is remote-oops-in-interrupt-context type of thing. BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 IP: [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 ... [<ffffffff81500fc6>] ? xfrm4_esp_rcv+0x36/0x70 [<ffffffff814acc9a>] ? ip_local_deliver_finish+0x9a/0x200 [<ffffffff81471b83>] ? __netif_receive_skb_core+0x6f3/0x8f0 ... RIP [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* xfrm: Introduce xfrm_input_afinfo to access the the callbacks properlySteffen Klassert2014-03-14
| | | | | | | | | | IPv6 can be build as a module, so we need mechanism to access the address family dependent callback functions properly. Therefore we introduce xfrm_input_afinfo, similar to that what we have for the address family dependent part of policies and states. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* xfrm: Add xfrm_tunnel_skb_cb to the skb common bufferSteffen Klassert2014-02-25
| | | | | | | | | | IPsec vti_rcv needs to remind the tunnel pointer to check it later at the vti_rcv_cb callback. So add this pointer to the IPsec common buffer, initialize it and check it to avoid transport state matching of a tunneled packet. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* xfrm4: Add IPsec protocol multiplexerSteffen Klassert2014-02-25
| | | | | | | | This patch add an IPsec protocol multiplexer. With this it is possible to add alternative protocol handlers as needed for IPsec virtual tunnel interfaces. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* xfrm: checkpatch errors with foo * barWeilong Chen2014-01-02
| | | | | | | | | This patch clean up some checkpatch errors like this: ERROR: "foo * bar" should be "foo *bar" ERROR: "(foo*)" should be "(foo *)" Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* xfrm: add LINUX_MIB_XFRMACQUIREERROR statistic counterFan Du2013-06-06
| | | | | | | | | | | | | | | | | | When host ping its peer, ICMP echo request packet triggers IPsec policy, then host negotiates SA secret with its peer. After IKE installed SA for OUT direction, but before SA for IN direction installed, host get ICMP echo reply from its peer. At the time being, the SA state for IN direction could be XFRM_STATE_ACQ, then the received packet will be dropped after adding LINUX_MIB_XFRMINSTATEINVALID statistic. Adding a LINUX_MIB_XFRMACQUIREERROR statistic counter for such scenario when SA in larval state is much clearer for user than LINUX_MIB_XFRMINSTATEINVALID which indicates the SA is totally bad. Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
* xfrm: Workaround incompatibility of ESN and async cryptoSteffen Klassert2012-09-04
| | | | | | | | | | | | | | | | | | | | | | ESN for esp is defined in RFC 4303. This RFC assumes that the sequence number counters are always up to date. However, this is not true if an async crypto algorithm is employed. If the sequence number counters are not up to date on sequence number check, we may incorrectly update the upper 32 bit of the sequence number. This leads to a DOS. We workaround this by comparing the upper sequence number, (used for authentication) with the upper sequence number computed after the async processing. We drop the packet if these numbers are different. To do this, we introduce a recheck function that does this check in the ESN case. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Perform a replay check after return from async codepathsSteffen Klassert2011-09-21
| | | | | | | | | | | | | | | | | When asyncronous crypto algorithms are used, there might be many packets that passed the xfrm replay check, but the replay advance function is not called yet for these packets. So the replay check function would accept a replay of all of these packets. Also the system might crash if there are more packets in async processing than the size of the anti replay window, because the replay advance function would try to update the replay window beyond the bounds. This pach adds a second replay check after resuming from the async processing to fix these issues. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Move the test on replay window size into the replay check functionsSteffen Klassert2011-03-29
| | | | | | | | | | | As it is, the replay check is just performed if the replay window of the legacy implementation is nonzero. So we move the test on a nonzero replay window inside the replay check functions to be sure we are testing for the right implementation. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Force a dst refcount before entering the xfrm type handlersSteffen Klassert2011-03-27
| | | | | | | | | | | | | Crypto requests might return asynchronous. In this case we leave the rcu protected region, so force a refcount on the skb's destination entry before we enter the xfrm type input/output handlers. This fixes a crash when a route is deleted whilst sending IPsec data that is transformed by an asynchronous algorithm. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Add support for IPsec extended sequence numbersSteffen Klassert2011-03-13
| | | | | | | | | | This patch adds support for IPsec extended sequence numbers (esn) as defined in RFC 4303. The bits to manage the anti-replay window are based on a patch from Alex Badea. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Move IPsec replay detection functions to a separate fileSteffen Klassert2011-03-13
| | | | | | | | | | To support multiple versions of replay detection, we move the replay detection functions to a separate file and make them accessible via function pointers contained in the struct xfrm_replay. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Use separate low and high order bits of the sequence numbers in ↵Steffen Klassert2011-03-13
| | | | | | | | | | | | | xfrm_skb_cb To support IPsec extended sequence numbers, we split the output sequence numbers of xfrm_skb_cb in low and high order 32 bits and we add the high order 32 bits to the input sequence numbers. All users are updated accordingly. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: SA lookups signature with markJamal Hadi Salim2010-02-22
| | | | | | | | pass mark to all SA lookups to prepare them for when we add code to have them search. Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: skb->dst accessorsEric Dumazet2009-06-03
| | | | | | | | | | | | | | | | | | Define three accessors to get/set dst attached to a skb struct dst_entry *skb_dst(const struct sk_buff *skb) void skb_dst_set(struct sk_buff *skb, struct dst_entry *dst) void skb_dst_drop(struct sk_buff *skb) This one should replace occurrences of : dst_release(skb->dst) skb->dst = NULL; Delete skb->dst field Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "xfrm: Accept ESP packets regardless of UDP encapsulation mode"David S. Miller2008-12-19
| | | | | | This reverts commit e061b165c7f4ec5e2e160d990b49011b5b6e5c6a. Signed-off-by: David S. Miller <davem@davemloft.net>
* xfrm: Accept ESP packets regardless of UDP encapsulation modeMartin Willi2008-12-04
| | | | | | | | | | | From: Martin Willi <martin@strongswan.org> An IPsec node speaking IKEv2 MUST accept incoming UDP encapsulated ESP packets, even if no NAT situation is detected. This is important if MOBIKE is in use. Some implementation keep the encapsulation mode if they move out of a NAT situation. Signed-off-by: David S. Miller <davem@davemloft.net>
* netns xfrm: per-netns MIBsAlexey Dobriyan2008-11-25
| | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netns xfrm: xfrm_input() fixupAlexey Dobriyan2008-11-25
| | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netns xfrm: state lookup in netnsAlexey Dobriyan2008-11-25
| | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Fix inter address family IPsec tunnel handling.Kazunori MIYAZAWA2008-03-24
| | | | | Signed-off-by: Kazunori MIYAZAWA <kazunori@miyazawa.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Fix bogus usage of u64 on input sequence numberHerbert Xu2008-02-13
| | | | | | | | | Al Viro spotted a bogus use of u64 on the input sequence number which is big-endian. This patch fixes it by giving the input sequence number its own member in the xfrm_skb_cb structure. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Fix statistics.Masahide NAKAMURA2008-01-31
| | | | | | | | | | | | | | o Outbound sequence number overflow error status is counted as XfrmOutStateSeqError. o Additionaly, it changes inbound sequence number replay error name from XfrmInSeqOutOfWindow to XfrmInStateSeqError to apply name scheme above. o Inbound IPv4 UDP encapsuling type mismatch error is wrongly mapped to XfrmInStateInvalid then this patch fiex the error to XfrmInStateMismatch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Remove unused exports.Adrian Bunk2008-01-31
| | | | | | | | | | This patch removes the following no longer used EXPORT_SYMBOL's: - xfrm_input.c: xfrm_parse_spi - xfrm_state.c: xfrm_replay_check - xfrm_state.c: xfrm_replay_advance Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move all calls to xfrm_audit_state_icvfail to xfrm_inputHerbert Xu2008-01-28
| | | | | | | Let's nip the code duplication in the bud :) Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: RFC4303 compliant auditingPaul Moore2008-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a number of new IPsec audit events to meet the auditing requirements of RFC4303. This includes audit hooks for the following events: * Could not find a valid SA [sections 2.1, 3.4.2] . xfrm_audit_state_notfound() . xfrm_audit_state_notfound_simple() * Sequence number overflow [section 3.3.3] . xfrm_audit_state_replay_overflow() * Replayed packet [section 3.4.3] . xfrm_audit_state_replay() * Integrity check failure [sections 3.4.4.1, 3.4.4.2] . xfrm_audit_state_icvfail() While RFC4304 deals only with ESP most of the changes in this patch apply to IPsec in general, i.e. both AH and ESP. The one case, integrity check failure, where ESP specific code had to be modified the same was done to the AH code for the sake of consistency. Signed-off-by: Paul Moore <paul.moore@hp.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [XFRM]: Support to increment packet dropping statistics.Masahide NAKAMURA2008-01-28
| | | | | Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Add xfrm_input_state helperHerbert Xu2008-01-28
| | | | | | | | | | This patch adds the xfrm_input_state helper function which returns the current xfrm state being processed on the input path given an sk_buff. This is currently only used by xfrm_input but will be used by ESP upon asynchronous resumption. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Use the correct family for input state lookupHerbert Xu2008-01-28
| | | | | | | | | | | | | When merging the input paths of IPsec I accidentally left a hard-coded AF_INET for the state lookup call. This broke IPv6 obviously. This patch fixes by getting the input callers to specify the family through skb->cb. Credit goes to Kazunori Miyazawa for diagnosing this and providing an initial patch. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Add async resume support on inputHerbert Xu2008-01-28
| | | | | | | | | This patch adds support for async resumptions on input. To do so, the transform would return -EINPROGRESS and subsequently invoke the function xfrm_input_resume to resume processing. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Remove nhoff from xfrm_inputHerbert Xu2008-01-28
| | | | | | | | | | | | | | | | | | The nhoff field isn't actually necessary in xfrm_input. For tunnel mode transforms we now throw away the output IP header so it makes no sense to fill in the nexthdr field. For transport mode we can now let the function transport_finish do the setting and it knows where the nexthdr field is. The only other thing that needs the nexthdr field to be set is the header extraction code. However, we can simply move the protocol extraction out of the generic header extraction. We want to minimise the amount of info we have to carry around between transforms as this simplifies the resumption process for async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move state lock into x->type->inputHerbert Xu2008-01-28
| | | | | | | | | | | | This patch releases the lock on the state before calling x->type->input. It also adds the lock to the spots where they're currently needed. Most of those places (all except mip6) are expected to disappear with async crypto. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Move integrity stat collection into xfrm_inputHerbert Xu2008-01-28
| | | | | | | | | | | | | | | | Similar to the moving out of the replay processing on the output, this patch moves the integrity stat collectin from x->type->input into xfrm_input. This would eventually allow transforms such as AH/ESP to be lockless. The error value EBADMSG (currently unused in the crypto layer) is used to indicate a failed integrity check. In future this error can be directly returned by the crypto layer once we switch to aead algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Store xfrm states in security path directlyHerbert Xu2008-01-28
| | | | | | | | | | | | | | As it is xfrm_input first collects a list of xfrm states on the stack before storing them in the packet's security path just before it returns. For async crypto, this construction presents an obstacle since we may need to leave the loop after each transform. In fact, it's much easier to just skip the stack completely and always store to the security path. This is proven by the fact that this patch actually shrinks the code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Merge most of the input pathHerbert Xu2008-01-28
| | | | | | | | | | | | As part of the work on asynchronous cryptographic operations, we need to be able to resume from the spot where they occur. As such, it helps if we isolate them to one spot. This patch moves most of the remaining family-specific processing into the common input code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Separate inner/outer mode processing on inputHerbert Xu2008-01-28
| | | | | | | | | | | | | | | | | | | With inter-family transforms the inner mode differs from the outer mode. Attempting to handle both sides from the same function means that it needs to handle both IPv4 and IPv6 which creates duplication and confusion. This patch separates the two parts on the input path so that each function deals with one family only. In particular, the functions xfrm4_extract_inut/xfrm6_extract_inut moves the pertinent fields from the IPv4/IPv6 IP headers into a neutral format stored in skb->cb. This is then used by the inner mode input functions to modify the inner IP header. In this way the input function no longer has to know about the outer address family. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Fix length check in xfrm_parse_spiHerbert Xu2007-10-18
| | | | | | | | | | | Currently xfrm_parse_spi requires there to be 16 bytes for AH and ESP. In contrived cases there may not actually be 16 bytes there since the respective header sizes are less than that (8 and 12 currently). This patch changes the test to use the actual header length instead of 16. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* mm: Remove slab destructors from kmem_cache_create().Paul Mundt2007-07-19
| | | | | | | | | | | | | | Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* [SK_BUFF]: Introduce skb_transport_header(skb)Arnaldo Carvalho de Melo2007-04-26
| | | | | | | | | For the places where we need a pointer to the transport header, it is still legal to touch skb->h.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET] XFRM: Fix whitespace errors.YOSHIFUJI Hideaki2007-02-11
| | | | | Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* [PATCH] slab: remove kmem_cache_tChristoph Lameter2006-12-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] slab: remove SLAB_ATOMICChristoph Lameter2006-12-07
| | | | | | | | SLAB_ATOMIC is an alias of GFP_ATOMIC Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [XFRM]: xfrm_parse_spi() annotationsAl Viro2006-09-28
| | | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Use SLAB_PANICAlexey Dobriyan2006-09-22
| | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: Fix "ntohl(ntohs" bugsAlexey Dobriyan2006-05-22
| | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [IPSEC]: Kill unused decap state structureHerbert Xu2006-04-01
| | | | | | | | | This patch removes the *_decap_state structures which were previously used to share state between input/post_input. This is no longer needed. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
* [NET]: use __read_mostly on kmem_cache_t , DEFINE_SNMP_STAT pointersEric Dumazet2005-08-29
| | | | | | | | | | | | | This patch puts mostly read only data in the right section (read_mostly), to help sharing of these data between CPUS without memory ping pongs. On one of my production machine, tcp_statistics was sitting in a heavily modified cache line, so *every* SNMP update had to force a reload. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-16
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-11 13:44:20 -0500