aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
Commit message (Collapse)AuthorAge
* libertas: Added support for host sleep featureAmitkumar Karwar2010-07-12
| | | | | | | | | | | | | Existing "ethtool -s ethX wol X" command configures hostsleep parameters, but those are activated only during suspend/resume, there is no way to configure host sleep without actual suspend. This patch adds debugfs command to enable/disable host sleep based on already configured host sleep parameters using wol command. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlagn: fix the bit mask of a FH register in stop Tx DMA flowEmmanuel Grumbach2010-07-09
| | | | | | | | | | | When we stop the Tx DMA channels, we poll bits 16:31 in FH_TSSR_RX_STATUS_REG. From 4965 and up, only the bits 16:26 are legal. Bits 27:31 are not used and are always unset. Polling them will lead to fail on timeout but since the timeout is quite small, the stall was not felt. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlagn: more generic description for iwlagn devicesWey-Yi Guy2010-07-09
| | | | | | | | Intel Wireless WiFi Next Gen AGN support two major categories: 1. Intel Wireless WiFi 4965 AGN device 2. Intel Wireless-N/Advanced-N/Ultimate-N family Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlwifi: correct descriptions of advanced ucode errorsJay Sternberg2010-07-09
| | | | | | | | | | ucode errors were redefined in new ucode images and all new errors were showing as advanced sysasserts which was misleading. new errors are not sequential so additional lookup table added. errors do not overlap so both are used to support older and newer ucode images. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* iwlwifi: enable 6050 series Gen2 devicesShanyu Zhao2010-07-09
| | | | | | | | | | To enable 6050 series Gen 2 devices: 1) new PCI_IDs are added; 2) new EEPROM version and calibration version numbers defined; 3) new hardware REV number defined; Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
* wl1271: use per-channel max tx power passed by mac80211 when scanningLuciano Coelho2010-07-08
| | | | | | | | | | We were always using the max transmit power when scanning. Now we use the values passed to the driver by the mac80211 stack, so that we comply with regulations. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: rewritten scanning codeLuciano Coelho2010-07-08
| | | | | | | | | | | | | | | | | | This patch is a complete rewrite of the scanning code. It now includes a state machine to scan all four possible sets of channels independently: 2.4GHz active, 2.4GHz passive, 5GHz active and 5GHz passive. The wl1271 firmware doesn't allow these sets to be mixed, so up to several scan commands have to be issued. This patch also allows scanning more than 24 channels per set, by breaking the sets into smaller parts if needed (the firmware can scan a maximum of 24 channels at a time). Previously, the scanning code was erroneously scanning all channels possible actively, not complying with the CRDA values. This is also fixed with this patch. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: moved scan operations to a separate fileLuciano Coelho2010-07-08
| | | | | | | | | | | | | | The scanning code is going to get a bit more complex, with proper support for active/passive scans together with 2.4GHz and 5GHz. In the future, also a new type of scan (periodic scan) will be added. When all this is implemented, the code is going to be much more complex, so we'd better separate it into a separate file. This patch doesn't have any impact on functionality. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Update interface to temporarily disable dynamic PSJuuso Oikarinen2010-07-08
| | | | | | | | | | The mac80211 interface to temporarily disable dynamic PS changed, make corresponding changes to the driver. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Saravanan Dhanabal <ext-saravanan.dhanabal@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Fix warning when disconnecting and ad-hoc networkJuuso Oikarinen2010-07-08
| | | | | | | | Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Disable dynamic PS based on BT co-ext sense eventsJuuso Oikarinen2010-07-08
| | | | | | | | | | | This patch requests mac80211 to disable dynamic PSM based on sense events coming from the firmware. Effectively, whenever there is bluetooth traffic, the mac80211 is forced into full PSM mode. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Update hardware ARP filtering configuration handlingJuuso Oikarinen2010-07-08
| | | | | | | | | | The interface for hardware ARP configuration changed in the mac80211. Change driver accordingly. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: read fem manufacturer value from nvsLuciano Coelho2010-07-08
| | | | | | | | | | We should read the fem manufacturer value from the NVS, so we can modify it easily and use a consistent value throughout the configuration. Previously we had to set the FEM value in the NVS and in the driver's initialization parameters. This patch removes the latter. Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Work around AP's with broken ps-poll functionalityJuuso Oikarinen2010-07-08
| | | | | | | | | | | | | | | | | | | | | | | Some AP's (such as Zyxel Prestige 600) have totally broken ps-poll functionality. When powersave is enabled, these AP's will set the TIM bit for a STA in beacons, but when the STA responds with a ps-poll, the AP does not respond with data. The wl1271 firmware is able to send an indication to the host, when this problem occurs. This patch adds implementation, which temporarily disables power-save in response to this indication, allowing the AP to transmit whatever data it has buffered for the STA / whatever data is inbound at that time. This patch does not make these AP's work reliably in PSM, but improves the chances of inbound data getting through. The side effect of this patch is increased power consumption when using a faulty AP. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Use all basic rates for ps-poll, instead of just the slowestJuuso Oikarinen2010-07-08
| | | | | | | | | | This improves ps-poll handling in WLAN PSM. It also improves performance, including WLAN-BT co-existence reliability. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Use the ARP configuration function from mac80211Juuso Oikarinen2010-07-08
| | | | | | | | | | | This patch updates the driver to use the ARP configuration function from the mac80211. Also, clean up IPv6 support from the ACX function as ARP is not used with that protocol version. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Add TSF handlingJuuso Oikarinen2010-07-08
| | | | | | | | | | Add functionality to pass the current TSF (mac time) to the mac80211. This is needed for ad-hoc merging. Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl1271: Remove calibration from join commandJuuso Oikarinen2010-07-08
| | | | | | | | | | | | | | | This patch removes the calibration performed on the first join command. The reasoning is that this is unnecessary as devices get their calibration data via the NVS file, and because the commands break BT coexistence. This is actually safe, because of the implementation the calibration was executed on the first JOIN anyway, after an ifdown/ifup the devices have relied on the NVS for calibration anyway (== most of the time.) Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Reviewed-by: Teemu Paasikivi <ext-teemu.3.paasikivi@nokia.com> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix a buffer leak in A-MPDU completionFelix Fietkau2010-07-07
| | | | | | | | | | | | When ath_tx_complete_aggr() is called, it's responsible for returning all buffers in the linked list. This was not done when the STA lookup failed, leading to a race condition that could leak a few buffers when a STA just disconnected. Fix this by immediately returning all buffers to the free list in this case. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix a potential buffer leak in the STA teardown pathFelix Fietkau2010-07-07
| | | | | | | | | | | | It looks like it might be possible for a TID to be paused, while still holding some queued buffers, however ath_tx_node_cleanup currently only iterates over active TIDs. Fix this by always checking every allocated TID for the STA that is being cleaned up. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wl12xx: Use MODULE_ALIAS macro at correct postion for SPI busAmeya Palande2010-07-06
| | | | | | | | | (Changed title, was "wl1251: Use MODULE_ALIAS macro at correct postion for SPI bus". -- JWL) Signed-off-by: Ameya Palande <ameya.palande@nokia.com> Acked-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'wireless-next-2.6' of ↵John W. Linville2010-07-06
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6
| * iwlwifi: adding enhance sensitivity table entriesWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | | | | | | | For newer devices (6000g2a and 6000g2b), the sensitivity table send to uCode require additional table entries to help sensitivity calibration. All the additional entries has fix data for now, but do expect the value will be change in the future when device become more stable. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
| * iwlwifi: generic parameter define for _agn deviceWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | | | | | | | | | Code clean up to change name from having 5000 as part of name which easy to confuse and think it is for 5000 series devices to more generic _agn name since it is being used by multiple _agn devices. No functional changes. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: debugfs file for txfifo command testingWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | Add debugfs file for REPLY_TXFIFO_FLUSH host command testing. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: add support for device tx flush requestWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "Flush" request can come from two different sources, it can either from mac80211, or from device when the operation is needed. Here adding the support for device issue "flush" request. When receive tx complete with status is TX_STATUS_FAIL_RFKILL_FLUSH, issue REPLY_TXFIFO_FLUSH command to uCode to flush out all the tx frames in queues. In this condition, since mac80211 has no knowledge of "flush" operation, driver need to stop all the tx queues and wait for the operation completed before wake up the queues for frames transmission. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: add mac80211 flush callback supportWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding flush callback support in the driver. Two type of flush can be issued by mac80211: 1. drop = true: frame drop is ok, issue REPLY_TXFIFO_FLUSH host command to uCode to drop all the frames in tx fifo queues; then return the control back to mac80211 2. drop = false: wait for either all the frames in tx fifo queues been transmitted, or timeout; then return the control back to mac80211 If the flush request coming from mac80211, mac80211 will make sure there are no additional frames push down to driver before flush operation is completed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: tx fifo queue flush commandWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | Add host command and structure for tx fifo queue flush Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: add debug print for parsing firmware TLVWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | | | When parsing TLV during loading firmware, if encounter any TLV error, log the error message to help debugging. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
| * iwlwifi: fix fw_restart module parameterWey-Yi Guy2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fw_restart module parameter was broken by the recent check for stuck queue patch, driver check the fx_restart module parameter before reload the firmware; but the stuck queue timer kick in after firmware error and reload the firmware even fw_restart=0. In this case, driver should not reload the firmware, it is important to help debugging uCode error. The only case we can ignore the module parameter is when user request firmware reload from debugfs, which can bypass the checking and perform firmware reload all the time. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
* | ath9k: fix crash with WEP in ad-hoc modeFelix Fietkau2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | Commit eed8e22f0133e8278b1f8079fcb452f1f9692f9d added support for using multicast key lookup to support per-vif/sta keys for AP and ad-hoc. Unfortunately, it also introduced a crash in ad-hoc mode when the sta pointer is NULL, which happens when setting up an interface with WEP keys. This patch fixes it by falling back to the assigned key index. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k: fix false positives in the baseband hang checkFelix Fietkau2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | | | ath9k_hw_check_alive() occasionally returns false, as the hardware is still processing data in a specific state. Fix this issue by repeating the test a few times with longer delay inbetween attempts. This gets rid of excessive hardware resets that appear frequently on some AR9132 based devices, but could also happen on AR9280. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: clean up the noise floor calibration code to reduce code duplicationFelix Fietkau2010-07-02
| | | | | | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: sanitize noise floor values properly on all chipsFelix Fietkau2010-07-02
| | | | | | | | | | | | | | | | This refactors the noise floor range checks to make them generic, and adds proper ranges for each supported chip type. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: sync initvals for ar9001 and ar9002 with AtherosFelix Fietkau2010-07-02
| | | | | | | | | | | | | | | | | | | | | | | | This includes the following changes/fixes: - a bugfix for stuck beacon issues - timing changes for improved performance - AGC setting improvements - fixes for high temperature issues on some chips Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: reformat the ar5008, ar9001 and ar9002 initvals to match ar9003Felix Fietkau2010-07-02
| | | | | | | | | | | | | | | | This format is generated by the initval tool, available at: git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/initvals-tool.git Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | ath9k_hw: fix a few inconsistencies in initval array namesFelix Fietkau2010-07-02
|/ | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k_htc: Add LED support for AR7010Sujith2010-06-30
| | | | | Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: fix TSF after reset on AR913xFelix Fietkau2010-06-30
| | | | | | | | | | | | | | | | | | When issuing a reset, the TSF value is lost in the hardware because of the 913x specific cold reset. As with some AR9280 cards, the TSF needs to be preserved in software here. Additionally, there's an issue that frequently prevents a successful TSF write directly after the chip reset. In this case, repeating the TSF write after the initval-writes usually works. This patch detects failed TSF writes and recovers from them, taking into account the delay caused by the initval writes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Björn Smedman <bjorn.smedman@venatech.se> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix compile warning when debug disabledIvo van Doorn2010-06-30
| | | | | | | | | | CC [M] drivers/net/wireless/rt2x00/rt2800lib.o drivers/net/wireless/rt2x00/rt2800lib.c: In function 'rt2800_ampdu_action': drivers/net/wireless/rt2x00/rt2800lib.c:2821: warning: unused variable 'rt2x00dev' Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Always set BBP_CSR_CFG_BBP_RW_MODE to 1Ivo van Doorn2010-06-30
| | | | | | | | | Latest rt2870 legacy driver also sets BBP_CSR_CFG_BBP_RW_MODE to 1 when reading or writing the EEPROM. This means we can make the BBP reading and writing completely equal on all platforms. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix antenna initializationIvo van Doorn2010-06-30
| | | | | | | | | | | | | | | | | Legacy driver indicates that BBP1_TX_ANTENNA must be set to 0 for TXPATH values of 1 and 3. So the previous statement that nothing should be done for TXPATH = 3, is false. Furthermore, remove the false BBP3_RX_ANTENNA initialization when TXPATH is 1 for PCI and SOC devices. This field will always be overridden in the next switch statement, making this initialization bogus. History of this line indicates it was there from the beginning, and was once caught as typo. Instead of replacing the line with the correct line, the correct line was added... Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Acked-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix IEEE80211_HT_CAP_RX_STBC assignmentIvo van Doorn2010-06-30
| | | | | | | | | | | IEEE80211_HT_CAP_RX_STBC is a 2 bit flag, and should thus never be set as normal flag. Instead we must read the number of RX paths from the EEPROM and set the IEEE80211_HT_CAP_RX_STBC with the correct value (using the same logic as the number of TX streams). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: fix beacon reset on rt2800Helmut Schaa2010-06-30
| | | | | | | | | | | | | | | | When an interface is removed the according beacon entry should be reset. The current approach to only clear the first word is not enough to stop the device from sending out the beacon, hence resulting in beacons being sent out for already removed interfaces. Fix this by invalidating the entire TXWI in front of the beacon instead of only the first word. Also clear all beacons during startup in the same way. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Disable link tuning in AP modeHelmut Schaa2010-06-30
| | | | | | | | | | | Since the link tuning is based on average RSSI values taken from all received frames it doesn't make sense to enable it in AP mode where every associated station provides independent RSSI values. Furthermore the legacy drivers don't enable link tuning in AP mode as well. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix beacon updates in rt61pciHelmut Schaa2010-06-30
| | | | | | | | | | | Fix rt61pci beacon updates in the same way as rt2800pci. rt61pci didn't update the beacon template after each beacon interval, resulting in the DTIM count being incorrect (if DTIM period > 1). Fix this by calling rt2x00lib_beacondone after the current beacon was sent out. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix beacon updates in rt2800pciHelmut Schaa2010-06-30
| | | | | | | | | | rt2800pci didn't update the beacon template after each beacon interval, resulting in the DTIM count being incorrect (if DTIM period > 1). Fix this by calling rt2x00lib_beacondone after the current beacon was sent out. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Enable multiBSS in rt2800Ivo van Doorn2010-06-30
| | | | | | | | | | MAC_BSSID_DW1_BSS_ID_MASK must be set to the mask 3, to enable 8 BSSID's. The MAC_BSSID_DW1_BSS_BCN_NUM is initialized to 7 to enable the 8 beacons. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Tested-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Align rt2800 EEPROM validation to Ralink vendor driver.Gertjan van Wingerde2010-06-30
| | | | | | | | Align with the latest versions of the Ralink legacy driver(s). Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Correctly detect 93C86 EEPROMs in rt2800pci.Gertjan van Wingerde2010-06-30
| | | | | | Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-12-26 10:02:05 -0500