aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/xhci.c
Commit message (Collapse)AuthorAge
* usb: host: xhci: add mutex for non-thread-safe dataChris Bainbridge2015-05-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Regression in commit 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") The regression resulted in intermittent failure to initialise a 10-port hub (with three internal VL812 4-port hub controllers) on boot, with a failure rate of around 8%, due to multiple race conditions when accessing addr_dev and slot_id in struct xhci_hcd. This regression also exposed a problem with xhci_setup_device, which "should be protected by the usb_address0_mutex" but no longer is due to commit 6fecd4f2a58c ("USB: separate usb_address0 mutexes for each bus") With separate buses (and locks) it is no longer the case that a single lock will protect xhci_setup_device from accesses by two parallel threads processing events on the two buses. Fix this by adding a mutex to protect addr_dev and slot_id in struct xhci_hcd, and by making the assignment of slot_id atomic. Fixes multiple boot errors: [ 0.583008] xhci_hcd 0000:00:14.0: Bad Slot ID 2 [ 0.583009] xhci_hcd 0000:00:14.0: Could not allocate xHCI USB device data structures [ 0.583012] usb usb1-port3: couldn't allocate usb_device And: [ 0.637409] xhci_hcd 0000:00:14.0: Error while assigning device slot ID [ 0.637417] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32. [ 0.637421] usb usb1-port1: couldn't allocate usb_device And: [ 0.753372] xhci_hcd 0000:00:14.0: ERROR: unexpected setup context command completion code 0x0. [ 0.753373] usb 1-3: hub failed to enable device, error -22 [ 0.753400] xhci_hcd 0000:00:14.0: Error while assigning device slot ID [ 0.753402] xhci_hcd 0000:00:14.0: Max number of devices this xHCI host supports is 32. [ 0.753403] usb usb1-port3: couldn't allocate usb_device And: [ 11.018386] usb 1-3: device descriptor read/all, error -110 And: [ 5.753838] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command Tested with 200 reboots, resulting in no USB hub init related errors. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.kernel.org/g/CAP-bSRb=A0iEYobdGCLpwynS7pkxpt_9ZnwyZTPVAoy0Y=Zo3Q@mail.gmail.com Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: <stable@vger.kernel.org> # 3.18+ [changed git commit description style for checkpatch -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: make module xhci_hcd removableArthur Demchenkov2015-05-24
| | | | | | | | | | | | | | Fixed regression. After commit 29e409f0f761 ("xhci: Allow xHCI drivers to be built as separate modules") the module xhci_hcd became non-removable. That behaviour is not expected and there're no notes about it in commit message. The module should be removable as it blocks PM suspend/resume functions (Debian Bug#666406). Signed-off-by: Arthur Demchenkov <spinal.by@gmail.com> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "xhci: Clear the host side toggle manually when endpoint is 'soft reset'"Mathias Nyman2015-03-11
| | | | | | | | | | | | | | | This reverts commit 27082e2654dc ("xhci: Clear the host side toggle manually") Turns out this fix to enable soft resetting endpoints wasn't mature enough. It caused regression with some usb DVB-T devices and needs some more tuning to get the endpiont ring pointers set correctly. The original commit was tagged for stable 3.18, and should be reverted from there as well. Cc: stable <stable@vger.kernel.org> # v3.18 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Clear the host side toggle manually when endpoint is 'soft reset'Mathias Nyman2015-02-24
| | | | | | | | | | | | | | | Main benefit of this is to get xhci connected USB scanners to work. Some devices use a clear endpoint halt request as a 'soft reset' even if the endpoint is not halted. This will clear the toggle and sequence on the device side. xHCI however refuses to reset a non-halted endpoint, so instead we need to issue a configure endpoint command on xHCI to clear its host side toggle and sequence, and get it in sync with the device side. Tested-by: Mike Mammarella <mikem@crystalorb.net> Cc: <stable@vger.kernel.org> # v3.18 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Silence "xHCI xhci_drop_endpoint called with disabled ep ..." messagesHans de Goede2015-01-25
| | | | | | | | | | | | | | | | | | | | | When re-applying the configuration after a successful usb device reset, xhci_discover_or_reset_device has already dropped the endpoints, and free-ed the rings. The endpoints already being dropped is expected, and should not lead to warnings. Use the fact that the rings are also free-ed in this scenario to detect this, and suppress the "xHCI xhci_drop_endpoint called with disabled ep ..." message in this case. Signed-off-by: Hans de Goede <hdegoede@redhat.com> -- Changes in v2: Move the ring check to only guard the xhci_warn, so as to avoid side-effects in case we have a scenario where the rings are free-ed, but the endpoint is not yet dropped. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Print hcc params, version and quirks on initHans de Goede2015-01-25
| | | | | | | | To help debugging xhci problems. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.19-rc5 into usb-nextGreg Kroah-Hartman2015-01-18
|\ | | | | | | | | | | We want the usb fixes in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Check if slot is already in default state before moving it thereMathias Nyman2015-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Solves xhci error cases with debug messages: xhci_hcd 0000:00:14.0: Setup ERROR: setup context command for slot 1. usb 1-6: hub failed to enable device, error -22 xhci will give a context state error if we try to set a slot in default state to the same default state with a special address device command. Turns out this happends in several cases: - retry reading the device rescriptor in hub_port_init() - usb_reset_device() is called for a slot in default state - in resume path, usb_port_resume() calls hub_port_init() The default state is usually reached from most states with a reset device command without any context state errors, but using the address device command with BSA bit set (block set address) only works from the enabled state and will otherwise cause context error. solve this by checking if we are already in the default state before issuing a address device BSA=1 command. Fixes: 48fc7dbd52c0 ("usb: xhci: change enumeration scheme to 'new scheme'") Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: clean up work to remove unused parameters for functions in xhci-mem.cLin Wang2015-01-09
| | | | | | | | | | | | | | | | | | | | | | | | Some parameters are not used by functions in xhci-mem.c, just remove it. Changes compared to v1: - Rebase to the latest usb-next branch Signed-off-by: Lin Wang <lin.x.wang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: Use setup_timerJulia Lawall2015-01-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert a call to init_timer and accompanying intializations of the timer's data and function fields to a call to setup_timer. A simplified version of the semantic match that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression t,f,d; @@ -init_timer(&t); +setup_timer(&t,f,d); -t.data = d; -t.function = f; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: remove unused parameter 'xhci' in function xhci_handshake().Lin Wang2015-01-09
| | | | | | | | | | | | | | | | | | Parameter 'xhci' is no longer be used in function xhci_handshake(), just remove it. Signed-off-by: Lin Wang <lin.x.wang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: Clean up work to xhci_add_endpoint().Lin Wang2015-01-09
|/ | | | | | | | | This patch removes unused variable "out_ctx" and avoid multiple calls to function xhci_get_endpoint_flag(). Signed-off-by: Lin Wang <lin.x.wang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-3.19-rc1' of ↵Linus Torvalds2014-12-14
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big set of USB and PHY patches for 3.19-rc1. The normal churn in the USB gadget area is in here, as well as xhci and other individual USB driver updates. The PHY tree is also in here, as there were dependancies on the USB tree. All of these have been in linux-next" * tag 'usb-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (351 commits) arm: omap3: twl: remove usb phy init data usbip: fix error handling in stub_probe() usb: gadget: udc: missing curly braces USB: mos7720: delete some unneeded code wusb: replace memset by memzero_explicit usbip: remove unneeded structure usb: xhci: fix comment for PORT_DEV_REMOVE xhci: don't use the same variable for stopped and halted rings current TD xhci: clear extra bits from slot context when setting max exit latency xhci: cleanup finish_td function USB: adutux: NULL dereferences on disconnect usb: chipidea: fix platform_no_drv_owner.cocci warnings usb: chipidea: Fixed a few typos in comments Documentation: bindings: add doc for the USB2 ChipIdea USB driver usb: chipidea: add a usb2 driver for ci13xxx usb: chipidea: fix phy handling usb: chipidea: remove duplicate dev_set_drvdata for host_start usb: chipidea: parameter 'mode' isn't needed for hw_device_reset usb: chipidea: add controller reset API usb: chipidea: remove flag CI_HDRC_REQUIRE_TRANSCEIVER ...
| * xhci: don't use the same variable for stopped and halted rings current TDMathias Nyman2014-12-02
| | | | | | | | | | | | | | | | | | | | | | | | | | Endpoints halted on errors, and endpoints stopped manually both used the same ep->stopped_td to store the halted or stopped td. this causes confusion and possible races. There is no longer a need to use the ep->stopped_td variable to store the halted TD. A halted endpoint is handled immediately and we can pass it to the handling function directly. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: clear extra bits from slot context when setting max exit latencyMathias Nyman2014-12-02
| | | | | | | | | | | | | | | | | | | | If we need to change the max exit latency with a Evaluate Context command, we copy the old output slot context and use it as input context for the command. This also copies the dev_state bits which are supposed to be zero in the input slot context. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge branch 'pm-runtime'Rafael J. Wysocki2014-12-08
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * pm-runtime: (25 commits) i2c-omap / PM: Drop CONFIG_PM_RUNTIME from i2c-omap.c dmaengine / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drivers: sh / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM e1000e / igb / PM: Eliminate CONFIG_PM_RUNTIME MMC / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM MFD / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM misc / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM media / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM input / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM iio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hsi / OMAP / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM i2c-hid / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM drm / exynos / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM gpio / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM hwrandom / exynos / PM: Use CONFIG_PM in #ifdef block / PM: Replace CONFIG_PM_RUNTIME with CONFIG_PM USB / PM: Drop CONFIG_PM_RUNTIME from the USB core PM: Merge the SET*_RUNTIME_PM_OPS() macros PM / Kconfig: Do not select PM directly from Kconfig files PCI / PM: Drop CONFIG_PM_RUNTIME from the PCI core ...
| * USB / PM: Drop CONFIG_PM_RUNTIME from the USB coreRafael J. Wysocki2014-12-03
| | | | | | | | | | | | | | | | | | | | | | | | | | After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: rework root port wake bits if controller isn't allowed to wakeupLu Baolu2014-11-22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When system is being suspended, if host device is not allowed to do wakeup, xhci_suspend() needs to clear all root port wake on bits. Otherwise, some platforms may generate spurious wakeup, even if PCI PME# is disabled. The initial commit ff8cbf250b44 ("xhci: clear root port wake on bits"), which also got into stable, turned out to not work correctly and had to be reverted, and is now rewritten. Cc: stable <stable@vger.kernel.org> # v3.2+ Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Suggested-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Alan Stern <stern@rowland.harvard.edu> [Mathias Nyman: reword commit message] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: xhci: Reset a halted endpoint immediately when we encounter a stall.Mathias Nyman2014-11-22
|/ | | | | | | | | | | | | | | | | | | | | If a device is halted and reuturns a STALL, then the halted endpoint needs to be cleared both on the host and device side. The host side halt is cleared by issueing a xhci reset endpoint command. The device side is cleared with a ClearFeature(ENDPOINT_HALT) request, which should be issued by the device driver if a URB reruen -EPIPE. Previously we cleared the host side halt after the device side was cleared. To make sure the host side halt is cleared in time we want to issue the reset endpoint command immedialtely when a STALL status is encountered. Otherwise we end up not following the specs and not returning -EPIPE several times in a row when trying to transfer data to a halted endpoint. Fixes: bcef3fd (USB: xhci: Handle errors that cause endpoint halts.) Cc: <stable@vger.kernel.org> # v2.6.33+ Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Allow xHCI drivers to be built as separate modulesAndrew Bresticker2014-10-03
| | | | | | | | | | | | Instead of building all of the xHCI code into a single module, separate it out into the core (xhci-hcd), PCI (xhci-pci, now selected by the new config option CONFIG_USB_XHCI_PCI), and platform (xhci-plat) drivers. Also update the PCI/platform drivers with module descriptions/licenses and have them register their respective drivers in their initcalls. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Export symbols used by host-controller driversAndrew Bresticker2014-10-03
| | | | | | | | | | In preparation for allowing the xHCI host controller drivers to be built as separate modules, export symbols from the xHCI core that may be used by the host controller drivers. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Check for XHCI_COMP_MODE_QUIRK when disabling D3coldAndrew Bresticker2014-10-03
| | | | | | | | | | | Instead of calling xhci_compliance_mode_recovery_timer_quirk_check() again in the PCI suspend path, just check for XHCI_COMP_MODE_QUIRK which will have been set based on xhci_compliance_mode_recovery_timer_quirk_check() in xhci_init(). Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Introduce xhci_init_driver()Andrew Bresticker2014-10-03
| | | | | | | | | | | | | | | Since the struct hc_driver is mostly the same across the xhci-pci, xhci-plat, and the upcoming xhci-tegra driver, introduce the function xhci_init_driver() which will populate the hc_driver with the default xHCI operations. The caller must supply a setup function which will be used as the hc_driver's reset callback. Note that xhci-plat also overrides the default ->start() callback so that it can do rcar-specific initialization. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hub: rename khubd to hub_wq in documentation and commentsPetr Mladek2014-09-24
| | | | | | | | | | | | | | | | | | | USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci_suspend is not stopping the root hub timer for the shared HCDAl Cooper2014-09-24
| | | | | | | | | | | | | V2 - Restart polling (which will restart the timer) for the shared HCD in xhci_resume(). xhci_suspend() will stop the primary HCD's root hub timer, but leaves the shared HCD's timer running. This change adds stopping of the shared HCD timer. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Move allocating of command for new_dequeue_state to queue_set_tr_deq()Hans de Goede2014-09-24
| | | | | | | | | | | | | | | | | | There are multiple reasons for this: 1) This fixes a missing check for xhci_alloc_command failing in xhci_handle_cmd_stop_ep() 2) This adds a warning when we cannot set the new dequeue state because of xhci_alloc_command failing 3) It puts the allocation of the command after the sanity checks in queue_set_tr_deq(), avoiding leaking the command if those fail 4) Since queue_set_tr_deq now owns the command it can free it if queue_command fails 5) It reduces code duplication Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: fix oops when xhci resumes from hibernate with hw lpm capable devicesMathias Nyman2014-09-11
| | | | | | | | | | | | | | | | | | | Resuming from hibernate (S4) will restart and re-initialize xHC. The device contexts are freed and will be re-allocated later during device reset. Usb core will disable link pm in device resume before device reset, which will try to change the max exit latency, accessing the device contexts before they are re-allocated. There is no need to zero (disable) the max exit latency when disabling hw lpm for a freshly re-initialized xHC. So check that device context exists before doing anything. The max exit latency will be set again after device reset when usb core enables the link pm. Reported-by: Imre Deak <imre.deak@intel.com> Tested-by: Imre Deak <imre.deak@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: rework cycle bit checking for new dequeue pointersMathias Nyman2014-08-19
| | | | | | | | | | | | | | | | | | | | | | | | | | When we manually need to move the TR dequeue pointer we need to set the correct cycle bit as well. Previously we used the trb pointer from the last event received as a base, but this was changed in commit 1f81b6d22a59 ("usb: xhci: Prefer endpoint context dequeue pointer") to use the dequeue pointer from the endpoint context instead It turns out some Asmedia controllers advance the dequeue pointer stored in the endpoint context past the event triggering TRB, and this messed up the way the cycle bit was calculated. Instead of adding a quirk or complicating the already hard to follow cycle bit code, the whole cycle bit calculation is now simplified and adapted to handle event and endpoint context dequeue pointer differences. Fixes: 1f81b6d22a59 ("usb: xhci: Prefer endpoint context dequeue pointer") Reported-by: Maciej Puzio <mx34567@gmail.com> Reported-by: Evan Langlois <uudruid74@gmail.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: Maciej Puzio <mx34567@gmail.com> Tested-by: Evan Langlois <uudruid74@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Add missing checks for xhci_alloc_command failureHans de Goede2014-08-01
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Blacklist using streams on the Etron EJ168 controllerHans de Goede2014-08-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Streams on the EJ168 do not work as they should. I've spend 2 days trying to get them to work, but without success. The first problem is that when ever you ring the stream-ring doorbell, the controller starts executing trbs at the beginning of the first ring segment, event if it ended somewhere else previously. This can be worked around by allowing enqueing only one td (not a problem with how streams are typically used) and then resetting our copies of the enqueueing en dequeueing pointers on a td completion to match what the controller seems to be doing. This way things seem to start working with uas and instead of being able to complete only the very first scsi command, the scsi core can probe the disk. But then things break later on when td-s get enqueued with more then one trb. The controller does seem to increase its dequeue pointer while executing a stream-ring (data transfer events I inserted for debugging do trigger). However execution seems to stop at the final normal trb of a multi trb td, even if there is a data transfer event inserted after the final trb. The first problem alone is a serious deviation from the spec, and esp. dealing with cancellation would have been very tricky if not outright impossible, but the second problem simply is a deal breaker altogether, so this patch simply disables streams. Note this will cause the usb-storage + uas driver pair to automatically switch to using usb-storage instead of uas on these devices, essentially reverting to the 3.14 and earlier behavior when uas was marked CONFIG_BROKEN. https://bugzilla.redhat.com/show_bug.cgi?id=1121288 https://bugzilla.kernel.org/show_bug.cgi?id=80101 Cc: stable@vger.kernel.org # 3.15 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: make error messages grepableOliver Neukum2014-07-09
| | | | | | | grep must work, not matter the line length. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: A default implementation for Ux timeout calculation and tier policy checkPratyush Anand2014-07-09
| | | | | | | | | | | | | | | | | | | As best case, a host controller should support U0 to U1 switching for the devices connected below any tier of hub level supported by usb specification. Therefore xhci_check_tier_policy should always return success as default implementation. A host should be able to issue LGO_Ux after the timeout calculated as per definition of system exit latency defined in C.1.5.2. Therefore xhci_calculate_ux_timeout returns ux_params.sel as the default implementation. Use default calculation in absence of any vendor specific limitations. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Tested-by: Aymen Bouattay <aymen.bouattay@st.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.16-rc4 into usb-nextGreg Kroah-Hartman2014-07-07
|\ | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Fix runtime suspended xhci from blocking system suspend.Wang, Yu2014-06-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The system suspend flow as following: 1, Freeze all user processes and kenrel threads. 2, Try to suspend all devices. 2.1, If pci device is in RPM suspended state, then pci driver will try to resume it to RPM active state in the prepare stage. 2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two workqueue items to resume usb2&usb3 roothub devices. 2.3, Call suspend callbacks of devices. 2.3.1, All suspend callbacks of all hcd's children, including roothub devices are called. 2.3.2, Finally, hcd_pci_suspend callback is called. Due to workqueue threads were already frozen in step 1, the workqueue items can't be scheduled, and the roothub devices can't be resumed in this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in usb_hcd_resume_root_hub won't be cleared. Finally, hcd_pci_suspend will return -EBUSY, and system suspend fails. The reason why this issue doesn't show up very often is due to that choose_wakeup will be called in step 2.3.1. In step 2.3.1, if udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then udev will resume to RPM active for changing the wakeup settings. This has been a lucky hit which hides this issue. For some special xHCI controllers which have no USB2 port, then roothub will not match hub driver due to probe failed. Then its do_remote_wakeup will be set to zero, and we won't be as lucky. xhci driver doesn't need to resume roothub devices everytime like in the above case. It's only needed when there are pending event TRBs. This patch should be back-ported to kernels as old as 3.2, that contains the commit f69e3120df82391a0ee8118e0a156239a06b2afb "USB: XHCI: resume root hubs when the controller resumes" Cc: stable@vger.kernel.org # 3.2 Signed-off-by: Wang, Yu <yu.y.wang@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> [use readl() instead of removed xhci_readl(), reword commit message -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: Correct last context entry calculation for Configure EndpointJulius Werner2014-06-24
|/ | | | | | | | | | | | | | | | | | | | | | | | | | The current XHCI driver recalculates the Context Entries field in the Slot Context on every add_endpoint() and drop_endpoint() call. In the case of drop_endpoint(), it seems to assume that the add_flags will always contain every endpoint for the new configuration, which is not necessarily correct if you don't make assumptions about how the USB core uses the add_endpoint/drop_endpoint interface (add_flags only contains endpoints that are new additions in the new configuration). Furthermore, EP0_FLAG is not consistently set in add_flags throughout the lifetime of a device. This means that when all endpoints are dropped, the Context Entries field can be set to 0 (which is invalid and may cause a Parameter Error) or -1 (which is interpreted as 31 and causes the driver to keep using the old, incorrect value). The only surefire way to set this field right is to also take all existing endpoints into account, and to force the value to 1 (meaning only EP0 is active) if no other endpoint is found. This patch implements that as a single step in the final check_bandwidth() call and removes the intermediary calculations from add_endpoint() and drop_endpoint(). Signed-off-by: Julius Werner <jwerner@chromium.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: rework command timeout and cancellation,Mathias Nyman2014-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use one timer to control command timeout. start/kick the timer every time a command is completed and a new command is waiting, or a new command is added to a empty list. If the timer runs out, then tag the current command as "aborted", and start the xhci command abortion process. Previously each function that submitted a command had its own timer. If that command timed out, a new command structure for the command was created and it was put on a cancel_cmd_list list, then a pci write to abort the command ring was issued. when the ring was aborted, it checked if the current command was the one to be canceled, later when the ring was stopped the driver got ownership of the TRBs in the command ring, compared then to the TRBs in the cancel_cmd_list, and turned them into No-ops. Now, instead, at timeout we tag the status of the command in the command queue to be aborted, and start the ring abortion. Ring abortion stops the command ring and gives control of the commands to us. All the aborted commands are now turned into No-ops. If the ring is already stopped when the command times outs its not possible to start the ring abortion, in this case the command is turnd to No-op right away. All these changes allows us to remove the entire cancel_cmd_list code. The functions waiting for a command to finish no longer have their own timeouts. They will wait either until the command completes normally, or until the whole command abortion is done. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Use completion and status in global command queueMathias Nyman2014-05-19
| | | | | | | | | Remove the per-device command list and handle_cmd_in_cmd_wait_list() and use the completion and status variables found in the command structure in the global command list. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Add a global command queueMathias Nyman2014-05-19
| | | | | | | | | | | | | | Create a list to store command structures, add a structure to it every time a command is submitted, and remove it from the list once we get a command completion event matching the command. Callers that wait for completion will free their command structures themselves. The other command structures are freed in the command completion event handler. Also add a check that prevents queuing commands if host is dying Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Use command structures when queuing commands on the command ringMathias Nyman2014-05-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To create a global command queue we require that each command put on the command ring is submitted with a command structure. Functions that queue commands and wait for completion need to allocate a command before submitting it, and free it once completed. The following command queuing functions need to be modified. xhci_configure_endpoint() xhci_address_device() xhci_queue_slot_control() xhci_queue_stop_endpoint() xhci_queue_new_dequeue_state() xhci_queue_reset_ep() xhci_configure_endpoint() xhci_configure_endpoint() could already be called with a command structure, and only xhci_check_maxpacket and xhci_check_bandwidth did not do so. These are changed and a command structure is now required. This change also simplifies the configure endpoint command completion handling and the "goto bandwidth_change" handling code can be removed. In some cases the command queuing function is called in interrupt context. These commands needs to be allocated atomically, and they can't wait for completion. These commands will in this patch be freed directly after queuing, but freeing will be moved to the command completion event handler in a later patch once we get the global command queue up.(Just so that we won't leak memory in the middle of the patch set) Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Report max device limit when Enable Slot command fails.Sarah Sharp2014-05-19
| | | | | | | | | | | | | | | | | | | xHCI host controllers may only support a limited number of device slot IDs, which is usually far less than the theoretical maximum number of devices (255) that the USB specifications advertise. This is frustrating to consumers that expect to be able to plug in a large number of devices. Add a print statement when the Enable Slot command fails to show how many devices the host supports. We can't change hardware manufacturer's design decisions, but hopefully we can save customers a little bit of time trying to debug why their host mysteriously fails when too many devices are plugged in. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Amund Hov <Amund.Hov@silabs.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Use pci_enable_msix_exact() instead of pci_enable_msix()Alexander Gordeev2014-05-19
| | | | | | | | | | | | | | | | | As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() or pci_enable_msi_exact() and pci_enable_msix_range() or pci_enable_msix_exact() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: fix wrong port number reported when setting USB2.0 hardware LPM.Lin Wang2014-05-19
| | | | | | | | | This patch fix wrong port number reported when trying to enable/disable USB2.0 hardware LPM. Signed-off-by: Lin Wang <lin.x.wang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb/xhci: fix compilation warning when !CONFIG_PCI && !CONFIG_PMDavid Cohen2014-04-25
| | | | | | | | | | | | | | | | | | | | When CONFIG_PCI and CONFIG_PM are not selected, xhci.c gets this warning: drivers/usb/host/xhci.c:409:13: warning: ‘xhci_msix_sync_irqs’ defined but not used [-Wunused-function] Instead of creating nested #ifdefs, this patch fixes it by defining the xHCI PCI stubs as inline. This warning has been in since 3.2 kernel and was caused by commit 421aa841a134f6a743111cf44d0c6d3b45e3cf8c "usb/xhci: hide MSI code behind PCI bars", but wasn't noticed until 3.13 when a configuration with these options was tried Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Cc: stable@vger.kernel.org # 3.2 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: Prefer endpoint context dequeue pointer over stopped_trbJulius Werner2014-04-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have observed a rare cycle state desync bug after Set TR Dequeue Pointer commands on Intel LynxPoint xHCs (resulting in an endpoint that doesn't fetch new TRBs and thus an unresponsive USB device). It always triggers when a previous Set TR Dequeue Pointer command has set the pointer to the final Link TRB of a segment, and then another URB gets enqueued and cancelled again before it can be completed. Further investigation showed that the xHC had returned the Link TRB in the TRB Pointer field of the Transfer Event (CC == Stopped -- Length Invalid), but when xhci_find_new_dequeue_state() later accesses the Endpoint Context's TR Dequeue Pointer field it is set to the first TRB of the next segment. The driver expects those two values to be the same in this situation, and uses the cycle state of the latter together with the address of the former. This should be fine according to the XHCI specification, since the endpoint ring should be stopped when returning the Transfer Event and thus should not advance over the Link TRB before it gets restarted. However, real-world XHCI implementations apparently don't really care that much about these details, so the driver should follow a more defensive approach to try to work around HC spec violations. This patch removes the stopped_trb variable that had been used to store the TRB Pointer from the last Transfer Event of a stopped TRB. Instead, xhci_find_new_dequeue_state() now relies only on the Endpoint Context, requiring a small amount of additional processing to find the virtual address corresponding to the TR Dequeue Pointer. Some other parts of the function were slightly rearranged to better fit into this model. This patch should be backported to kernels as old as 2.6.31 that contain the commit ae636747146ea97efa18e04576acd3416e2514f5 "USB: xhci: URB cancellation support." Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.14-rc6 into usb-nextGreg Kroah-Hartman2014-03-12
|\ | | | | | | We want the USB fixes in here as well.
| * Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather."Mathias Nyman2014-03-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 247bf557273dd775505fb9240d2d152f4f20d304. This commit, together with commit 3804fad45411b48233b48003e33a78f290d227c8 "USBNET: ax88179_178a: enable tso if usb host supports sg dma" were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules required, but for now this patch needs to be reverted to get USB 3.0 mass storage devices working at the level they used to. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: add the meaningful IRQ description if it is emptyAdrian Huang2014-03-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When some xHCI host controllers fall back to use the legacy IRQ, the member irq_descr of the usb_hcd structure will be empty. This leads to the empty string of the xHCI host controller in /proc/interrupts. Here is the example (The irq 19 is the xHCI host controller): CPU0 0: 91 IO-APIC-edge timer 8: 1 IO-APIC-edge rtc0 9: 7191 IO-APIC-fasteoi acpi 18: 104 IR-IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 19: 473 IR-IO-APIC-fasteoi After applying the patch, the name of the registered xHCI host controller can be displayed correctly. Here is the example: CPU0 0: 91 IO-APIC-edge timer 8: 1 IO-APIC-edge rtc0 9: 7191 IO-APIC-fasteoi acpi 18: 104 IR-IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2 19: 473 IR-IO-APIC-fasteoi xhci_hcd:usb3 Tested on v3.14-rc4. Signed-off-by: Adrian Huang <ahuang12@lenovo.com> Reviewed-by: Nagananda Chumbalkar <nchumbalkar@lenovo.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | xhci: Handle MaxPSASize == 0Hans de Goede2014-03-04
| | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | xhci: use usb_ss_max_streams in xhci_check_streams_endpointHans de Goede2014-03-04
| | | | | | | | | | | | | | | | The ss_ep_comp bmAttributes filed can contain more info then just the streams, use usb_ss_max_streams to properly get max streams. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* | xhci: Free streams when they are still allocated on a set_interface callHans de Goede2014-03-04
|/ | | | | | | | | | | | | | | | | And warn about this, as that would be a driver bug. Like wise drivers should ensure that streams are properly free-ed before a device is reset. So lets warn about that too. This already causes warnings in the form of: [ 96.982398] xhci_hcd 0000:01:00.0: WARN Can't disable streams for endpoint 0x81 , streams are already disabled! [ 96.982400] xhci_hcd 0000:01:00.0: WARN xhci_free_streams() called with non-streams endpoint But it is better to also warn about the actual cause of this later warnings. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
generated by cgit v1.2.2 (git 2.25.0) at 2024-10-13 15:15:11 -0400