aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net
Commit message (Collapse)AuthorAge
* net: mvneta: disable IP checksum with jumbo frames for Armada 370Simon Guinot2015-07-10
| | | | | | | | | | | | | | | | | | [ Upstream commit b65657fc240ae6c1d2a1e62db9a0e61ac9631d7a ] The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't support TCP/IP checksumming with frame sizes larger than 1600 bytes. This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set to a value greater than 1600 bytes. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: mvneta: introduce compatible string "marvell, armada-xp-neta"Simon Guinot2015-07-10
| | | | | | | | | | | | | | | | | | [ Upstream commit f522a975a8101895a85354b9c143f41b8248e71a ] The mvneta driver supports the Ethernet IP found in the Armada 370, XP, 380 and 385 SoCs. Since at least one more hardware feature is available for the Armada XP SoCs then a way to identify them is needed. This patch introduces a new compatible string "marvell,armada-xp-neta". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocationTom Lendacky2015-07-10
| | | | | | | | | | | | | | | | [ Upstream commit 472cfe7127760d68b819cf35a26e5a1b44b30f4e ] When allocating Rx related buffers, alloc_pages is called using an order number that is decreased until successful. A system under stress can experience failures during this allocation process resulting in a warning being issued. This message can be of concern to end users even though the failure is not fatal. Since the failure is not fatal and can occur multiple times, the driver should include the __GFP_NOWARN flag to suppress the warning message from being issued. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* bnx2x: fix lockdep splatEric Dumazet2015-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit d53c66a5b80698620f7c9ba2372fff4017e987b8 ] Michel reported following lockdep splat [ 44.718117] INFO: trying to register non-static key. [ 44.723081] the code is fine but needs lockdep annotation. [ 44.728559] turning off the locking correctness validator. [ 44.734036] CPU: 8 PID: 5483 Comm: ethtool Not tainted 4.1.0 [ 44.770289] Call Trace: [ 44.772741] [<ffffffff816eb1cd>] dump_stack+0x4c/0x65 [ 44.777879] [<ffffffff8111d921>] ? console_unlock+0x1f1/0x510 [ 44.783708] [<ffffffff811121f5>] __lock_acquire+0x1d05/0x1f10 [ 44.789538] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.795276] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.801967] [<ffffffff8111390d>] ? trace_hardirqs_on+0xd/0x10 [ 44.807793] [<ffffffff811330fa>] ? hrtimer_try_to_cancel+0x4a/0x250 [ 44.814142] [<ffffffff81112ba6>] lock_acquire+0xb6/0x290 [ 44.819537] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.824844] [<ffffffff810d66ad>] flush_work+0x3d/0x280 [ 44.830061] [<ffffffff810d6675>] ? flush_work+0x5/0x280 [ 44.835366] [<ffffffff816f3c43>] ? schedule_hrtimeout_range+0x13/0x20 [ 44.841889] [<ffffffff8112ec9b>] ? usleep_range+0x4b/0x50 [ 44.847365] [<ffffffff8111370a>] ? mark_held_locks+0x6a/0x90 [ 44.853102] [<ffffffff810d8585>] ? __cancel_work_timer+0x105/0x1c0 [ 44.859359] [<ffffffff81113835>] ? trace_hardirqs_on_caller+0x105/0x1d0 [ 44.866045] [<ffffffff810d851f>] __cancel_work_timer+0x9f/0x1c0 [ 44.872048] [<ffffffffa0010982>] ? bnx2x_func_stop+0x42/0x90 [bnx2x] [ 44.878481] [<ffffffff810d8670>] cancel_work_sync+0x10/0x20 [ 44.884134] [<ffffffffa00259e5>] bnx2x_chip_cleanup+0x245/0x730 [bnx2x] [ 44.890829] [<ffffffff8110ce02>] ? up+0x32/0x50 [ 44.895439] [<ffffffff811306b5>] ? del_timer_sync+0x5/0xd0 [ 44.901005] [<ffffffffa005596d>] bnx2x_nic_unload+0x20d/0x8e0 [bnx2x] [ 44.907527] [<ffffffff811f1aef>] ? might_fault+0x5f/0xb0 [ 44.912921] [<ffffffffa005851c>] bnx2x_reload_if_running+0x2c/0x50 [bnx2x] [ 44.919879] [<ffffffffa005a3c5>] bnx2x_set_ringparam+0x2b5/0x460 [bnx2x] [ 44.926664] [<ffffffff815d498b>] dev_ethtool+0x55b/0x1c40 [ 44.932148] [<ffffffff815dfdc7>] ? rtnl_lock+0x17/0x20 [ 44.937364] [<ffffffff815e7f8b>] dev_ioctl+0x17b/0x630 [ 44.942582] [<ffffffff815abf8d>] sock_do_ioctl+0x5d/0x70 [ 44.947972] [<ffffffff815ac013>] sock_ioctl+0x73/0x280 [ 44.953192] [<ffffffff8124c1c8>] do_vfs_ioctl+0x88/0x5b0 [ 44.958587] [<ffffffff8110d0b3>] ? up_read+0x23/0x40 [ 44.963631] [<ffffffff812584cc>] ? __fget_light+0x6c/0xa0 [ 44.969105] [<ffffffff8124c781>] SyS_ioctl+0x91/0xb0 [ 44.974149] [<ffffffff816f4dd7>] system_call_fastpath+0x12/0x6f As bnx2x_init_ptp() is only called if bp->flags contains PTP_SUPPORTED, we also need to guard bnx2x_stop_ptp() with same condition, otherwise ptp_task workqueue is not initialized and kernel barfs on cancel_work_sync() Fixes: eeed018cbfa30 ("bnx2x: Add timestamping and PTP hardware clock support") Reported-by: Michel Lespinasse <walken@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Michal Kalderon <Michal.Kalderon@qlogic.com> Cc: Ariel Elior <Ariel.Elior@qlogic.com> Cc: Yuval Mintz <Yuval.Mintz@qlogic.com> Cc: David Decotigny <decot@google.com> Acked-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: phy: fix phy link up when limiting speed via device treeMugunthan V N2015-07-10
| | | | | | | | | | | | | | | | [ Upstream commit eb686231fce3770299760f24fdcf5ad041f44153 ] When limiting phy link speed using "max-speed" to 100mbps or less on a giga bit phy, phy never completes auto negotiation and phy state machine is held in PHY_AN. Fixing this issue by comparing the giga bit advertise though phydev->supported doesn't have it but phy has BMSR_ESTATEN set. So that auto negotiation is restarted as old and new advertise are different and link comes up fine. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mlx4: Disable HA for SRIOV PF RoCE devicesOr Gerlitz2015-07-10
| | | | | | | | | | | | | | | [ Upstream commit 7254acffeeec3c0a75b9c5364c29a6eb00014930 ] When in HA mode, the driver exposes an IB (RoCE) device instance with only one port. Under SRIOV, the existing implementation doesn't go well with the PF RoCE driver's role of Special QPs Para-Virtualization, etc. As such, disable HA for the mlx4 PF RoCE device in SRIOV mode. Fixes: a57500903093 ('IB/mlx4: Add port aggregation support') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx4_en: Fix wrong csum complete report when rxvlan offload is disabledIdo Shamay2015-07-10
| | | | | | | | | | | | | | | | | [ Upstream commit 79a258526ce1051cb9684018c25a89d51ac21be8 ] The check_csum() function relied on hwtstamp_rx_filter to know if rxvlan offload is disabled. This is wrong since rxvlan offload can be switched on/off regardless of hwtstamp_rx_filter. Also moved check_csum to query CQE information to identify VLAN packets and removed the check of IP packets, since it has been validated before. Fixes: f8c6455bb04b ('net/mlx4_en: Extend checksum offloading by CHECKSUM COMPLETE') Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx4_en: Wake TX queues only when there's enough roomIdo Shamay2015-07-10
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 488a9b48e398b157703766e2cd91ea45ac6997c5 ] Indication of a single completed packet, marked by txbbs_skipped being bigger then zero, in not enough in order to wake up a stopped TX queue. The completed packet may contain a single TXBB, while next packet to be sent (after the wake up) may have multiple TXBBs (LSO/TSO packets for example), causing overflow in queue followed by WQE corruption and TX queue timeout. Instead, wake the stopped queue only when there's enough room for the worst case (maximum sized WQE) packet that we should need to handle after the queue is opened again. Also created an helper routine - mlx4_en_is_tx_ring_full, which checks if the current TX ring is full or not. It provides better code readability and removes code duplication. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net/mlx4_en: Release TX QP when destroying TX ringEran Ben Elisha2015-07-10
| | | | | | | | | | | | | | [ Upstream commit 0eb08514fdbdcd16fd6870680cd638f203662e9d ] TX ring QP wasn't released at mlx4_en_destroy_tx_ring. Instead, the code used the deprecated base_tx_qpn field. Move TX QP release to mlx4_en_destroy_tx_ring and remove the base_tx_qpn field. Fixes: ddae0349fdb7 ('net/mlx4: Change QP allocation scheme') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xen-netback: fix a BUG() during initializationPalik, Imre2015-07-10
| | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 12b322ac85208de564ecf23aa754d796a91de21f ] Commit edafc132baac ("xen-netback: making the bandwidth limiter runtime settable") introduced the capability to change the bandwidth rate limit at runtime. But it also introduced a possible crashing bug. If netback receives two XenbusStateConnected without getting the hotplug-status watch firing in between, then it will try to register the watches for the rate limiter again. But this triggers a BUG() in the watch registration code. The fix modifies connect() to remove the possibly existing packet-rate watches before trying to install those watches. This behaviour is in line with how connect() deals with the hotplug-status watch. Signed-off-by: Imre Palik <imrep@amazon.de> Cc: Matt Wilson <msw@amazon.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mvneta: add forgotten initialization of autonegotiation bitsStas Sergeev2015-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [ Upstream commit 538761b794c1542f1c6e31eadd9d7aae118889f7 ] The commit 898b2970e2c9 ("mvneta: implement SGMII-based in-band link state signaling") changed mvneta_adjust_link() so that it does not clear the auto-negotiation bits in MVNETA_GMAC_AUTONEG_CONFIG register. This was necessary for auto-negotiation mode to work. Unfortunately I haven't checked if these bits are ever initialized. It appears they are not. This patch adds the missing initialization of the auto-negotiation bits in the MVNETA_GMAC_AUTONEG_CONFIG register. It fixes the following regression: https://www.mail-archive.com/netdev@vger.kernel.org/msg67928.html Since the patch was tested to fix a regression, it should be applied to stable tree. Tested-by: Arnaud Ebalard <arno@natisbad.org> CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* can: fix loss of CAN frames in raw_rcvOliver Hartkopp2015-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | commit 36c01245eb8046c16eee6431e7dbfbb302635fa8 upstream. As reported by Manfred Schlaegl here http://marc.info/?l=linux-netdev&m=143482089824232&w=2 commit 514ac99c64b "can: fix multiple delivery of a single CAN frame for overlapping CAN filters" requires the skb->tstamp to be set to check for identical CAN skbs. As net timestamping is influenced by several players (netstamp_needed and netdev_tstamp_prequeue) Manfred missed a proper timestamp which leads to CAN frame loss. As skb timestamping became now mandatory for CAN related skbs this patch makes sure that received CAN skbs always have a proper timestamp set. Maybe there's a better solution in the future but this patch fixes the CAN frame loss so far. Reported-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* b43: fix support for 14e4:4321 PCI dev with BCM4321 chipsetRafał Miłecki2015-06-29
| | | | | | | | | | | | | | | | | commit 90f91b129810c3f169e443252be30ed7c0130326 upstream. It seems Broadcom released two devices with conflicting device id. There are for sure 14e4:4321 PCI devices with BCM4321 (N-PHY) chipset, they can be found in routers, e.g. Netgear WNR834Bv2. However, according to Broadcom public sources 0x4321 is also used for 5 GHz BCM4306 (G-PHY). It's unsure if they meant PCI device id, or "virtual" id (from SPROM). To distinguish these devices lets check PHY type (G vs. N). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: <stable@vger.kernel.org> # 3.16+ Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: igb: fix the start time for periodic output signalsRichard Cochran2015-06-11
| | | | | | | | | | | | | | | When programming the start of a periodic output, the code wrongly places the seconds value into the "low" register and the nanoseconds into the "high" register. Even though this is backwards, it slipped through my testing, because the re-arming code in the interrupt service routine is correct, and the signal does appear starting with the second edge. This patch fixes the issue by programming the registers correctly. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* enic: fix memory leak in rq_cleanGovindarajulu Varadarajan2015-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When incoming packet qualifies for rx_copybreak, we copy the data to newly allocated skb. We do not free/unmap the original buffer. At this point driver assumes this buffer is unallocated. When enic_rq_alloc_buf() is called for buffer allocation, it checks if buf->os_buf is NULL. If its not NULL that means buffer can be re-used. When vnic_rq_clean() is called for freeing all rq buffers, and if the rx_copybreak reused buffer falls outside the used desc, we do not free the buffer. The following trace is observer when dma-debug is enabled. Fix is to walk through complete ring and clean if buffer is present. [ 40.555386] ------------[ cut here ]------------ [ 40.555396] WARNING: CPU: 0 PID: 491 at lib/dma-debug.c:971 dma_debug_device_change+0x188/0x1f0() [ 40.555400] pci 0000:06:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=4] One of leaked entries details: [device address=0x00000000ff4cc040] [size=9018 bytes] [mapped with DMA_FROM_DEVICE] [mapped as single] [ 40.555402] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw joydev mousedev gf128mul hid_generic glue_helper mgag200 usbhid ttm hid drm_kms_helper drm ablk_helper syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core iTCO_wdt cryptd mac_hid evdev pcspkr sb_edac edac_core tpm_tis iTCO_vendor_support ipmi_si wmi tpm ipmi_msghandler shpchp lpc_ich processor acpi_power_meter hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache sd_mod ehci_pci ehci_hcd megaraid_sas usbcore scsi_mod usb_common enic(-) crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 40.555467] CPU: 0 PID: 491 Comm: rmmod Not tainted 4.1.0-rc7-ARCH-01305-gf59b71f #118 [ 40.555469] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 40.555471] 0000000000000000 00000000e2f8a5b7 ffff880275f8bc48 ffffffff8158d6f0 [ 40.555474] 0000000000000000 ffff880275f8bca0 ffff880275f8bc88 ffffffff8107b04a [ 40.555477] ffff8802734e0000 0000000000000004 ffff8804763fb3c0 ffff88027600b650 [ 40.555480] Call Trace: [ 40.555488] [<ffffffff8158d6f0>] dump_stack+0x4f/0x7b [ 40.555492] [<ffffffff8107b04a>] warn_slowpath_common+0x8a/0xc0 [ 40.555494] [<ffffffff8107b0d5>] warn_slowpath_fmt+0x55/0x70 [ 40.555498] [<ffffffff812fa408>] dma_debug_device_change+0x188/0x1f0 [ 40.555503] [<ffffffff8109aaef>] notifier_call_chain+0x4f/0x80 [ 40.555506] [<ffffffff8109aecb>] __blocking_notifier_call_chain+0x4b/0x70 [ 40.555510] [<ffffffff8109af06>] blocking_notifier_call_chain+0x16/0x20 [ 40.555514] [<ffffffff813f8066>] __device_release_driver+0xf6/0x120 [ 40.555518] [<ffffffff813f8b08>] driver_detach+0xc8/0xd0 [ 40.555523] [<ffffffff813f7c59>] bus_remove_driver+0x59/0xe0 [ 40.555527] [<ffffffff813f93a0>] driver_unregister+0x30/0x70 [ 40.555534] [<ffffffff8131532d>] pci_unregister_driver+0x2d/0xa0 [ 40.555542] [<ffffffffa0200ec2>] enic_cleanup_module+0x10/0x14e [enic] [ 40.555547] [<ffffffff8110158f>] SyS_delete_module+0x1cf/0x280 [ 40.555551] [<ffffffff811e284e>] ? ____fput+0xe/0x10 [ 40.555554] [<ffffffff810980ec>] ? task_work_run+0xbc/0xf0 [ 40.555558] [<ffffffff815930ee>] system_call_fastpath+0x12/0x71 [ 40.555561] ---[ end trace 4988cadc77c2b236 ]--- [ 40.555562] Mapped at: [ 40.555563] [<ffffffff812fa865>] debug_dma_map_page+0x95/0x150 [ 40.555566] [<ffffffffa01f4a88>] enic_rq_alloc_buf+0x1b8/0x360 [enic] [ 40.555570] [<ffffffffa01f7658>] enic_open+0xf8/0x820 [enic] [ 40.555574] [<ffffffff8148d50e>] __dev_open+0xce/0x150 [ 40.555579] [<ffffffff8148d851>] __dev_change_flags+0xa1/0x170 Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* enic: check return value for stat dumpGovindarajulu Varadarajan2015-06-11
| | | | | | | | | | | We do not check the return value of enic_dev_stats_dump(). If allocation fails, we will hit NULL pointer reference. Return only if memory allocation fails. For other failures, we return the previously recorded values. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* enic: unlock napi busy poll before unmasking intrGovindarajulu Varadarajan2015-06-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and hits the following WARN_ON message. Fix is to unlock napi_poll before unmasking the interrupt. [ 781.121746] ------------[ cut here ]------------ [ 781.121789] WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/cisco/enic/vnic_rq.h:228 enic_poll_msix_rq+0x36a/0x3c0 [enic]() [ 781.121834] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel mgag200 ttm drm_kms_helper joydev aes_x86_64 lrw drm gf128mul mousedev glue_helper sb_edac ablk_helper iTCO_wdt iTCO_vendor_support evdev ipmi_si syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core edac_core lpc_ich mac_hid cryptd pcspkr ipmi_msghandler shpchp tpm_tis acpi_power_meter tpm wmi processor hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache hid_generic usbhid hid ehci_pci ehci_hcd sd_mod megaraid_sas usbcore scsi_mod usb_common enic crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 781.122176] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc6-ARCH-00040-gc46a024-dirty #106 [ 781.122210] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 781.122252] 0000000000000000 bddbbc9d655ec96e ffff880277e43da8 ffffffff81583fe8 [ 781.122286] 0000000000000000 0000000000000000 ffff880277e43de8 ffffffff8107acfa [ 781.122319] ffff880272c01000 ffff880273f18000 ffff880273f1a100 0000000000000000 [ 781.122352] Call Trace: [ 781.122364] <IRQ> [<ffffffff81583fe8>] dump_stack+0x4f/0x7b [ 781.122399] [<ffffffff8107acfa>] warn_slowpath_common+0x8a/0xc0 [ 781.122425] [<ffffffff8107ae2a>] warn_slowpath_null+0x1a/0x20 [ 781.122455] [<ffffffffa01fa9ca>] enic_poll_msix_rq+0x36a/0x3c0 [enic] [ 781.122487] [<ffffffff8148525a>] net_rx_action+0x22a/0x370 [ 781.122512] [<ffffffff8107ed3d>] __do_softirq+0xed/0x2d0 [ 781.122537] [<ffffffff8107f06e>] irq_exit+0x7e/0xa0 [ 781.122560] [<ffffffff8158c424>] do_IRQ+0x64/0x100 [ 781.122582] [<ffffffff8158a42e>] common_interrupt+0x6e/0x6e [ 781.122605] <EOI> [<ffffffff810bd331>] ? cpu_startup_entry+0x121/0x480 [ 781.122638] [<ffffffff810bd2fc>] ? cpu_startup_entry+0xec/0x480 [ 781.122667] [<ffffffff810f2ed3>] ? clockevents_register_device+0x113/0x1f0 [ 781.122698] [<ffffffff81050ab6>] start_secondary+0x196/0x1e0 [ 781.122723] ---[ end trace cec2e9dd3af7b9db ]--- Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: power on MII block for all MII modesFlorian Fainelli2015-06-08
| | | | | | | | | | | | The RGMII block is currently only powered on when using RGMII or RGMII_NO_ID, which is not correct when using the GENET interface in MII or Reverse MII modes. We always need to power on the RGMII interface for this block to properly work, regardless of the MII mode in which we operate. Fixes: aa09677cba423 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* b44: call netif_napi_del()Hauke Mehrtens2015-06-07
| | | | | | | | | When the driver gets unregistered a call to netif_napi_del() was missing, this all was also missing in the error paths of b44_init_one(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent()Sriharsha Basavapatna2015-06-07
| | | | | | | | | | | | | There are several places in the driver (all in control paths) where coherent dma memory is being allocated using either dma_alloc_coherent() or the deprecated pci_alloc_consistent(). All these calls should be changed to use dma_zalloc_coherent() to avoid uninitialized fields in data structures backed by this memory. Reported-by: Joerg Roedel <jroedel@suse.de> Tested-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe: Use disable_irq_nosync from within timer functionLendacky, Thomas2015-06-07
| | | | | | | | | Since the Tx timer function runs in softirq context the driver needs to call disable_irq_nosync instead of a disable_irq. Reported-by: Josh Stone <jistone@redhat.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* i40e: Make sure to be in VEB mode if SRIOV is enabled at probeAnjali Singhai Jain2015-06-04
| | | | | | | | | | If SRIOV is enabled we need to be in VEB mode not VEPA mode at probe. This fixes an NPAR bug when SRIOV is enabled in the BIOS. Change-ID: Ibf006abafd9a0ca3698ec24848cd771cf345cbbc Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e: start up in VEPA mode by defaultAnjali Singhai Jain2015-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixes a bug in the default configuration which prevented a software bridge loaded on the PF interface from working correctly because broadcast packets are incorrectly looped back. Fix the general case, by loading the driver in VEPA mode Until a VF or VMDq VSI is added. This way loopback on the Main VSI is turned off until needed and can resolve the issue of unnecessary reflection for users that do not have VF or VMDq VSIs setup. The driver must now coordinate the loopback setting for the Flow Director (FDIR) VSI to make sure it is in sync with the current VEB or VEPA mode setting. The user can still switch bridge modes from the bridge commands and choose to be in VEPA mode with VF VSIs. Because of hardware requirements, the call to switch to VEB mode when no VF/VMDqs are present will be rejected. NOTE: This patch uses BIT_ULL as that is preferred going forward, a followup patch in the lower priority queue to net-next will fix up the remaining 1 << usages. Change-ID: Ib121ddb18fe4b3c4f52e9deda6fcbeb9105683d1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* i40e/i40evf: Fix mixed size frags and linearizationAnjali Singhai Jain2015-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug where the i40e Tx queue will hang if this skb is passed to the driver. With mixed size fragments while using TSO there was a corner case where we needed to linearize but we were not. This was seen with iSCSI traffic and could be reproduced with a frag list that looks like this: num_frags = 17, gso_segs = 17, hdr_len = 66, skb_shinfo(skb)->gso_size = 1448 size = 3002, j = 1, frag_size = 2936, num_frags = 17 size = 4268, j = 1, frag_size = 4096, num_frags = 16 size = 5534, j = 1, frag_size = 4096, num_frags = 15 size = 5352, j = 1, frag_size = 4096, num_frags = 14 size = 5170, j = 1, frag_size = 4096, num_frags = 13 size = 3468, j = 1, frag_size = 2576, num_frags = 12 size = 750, j = 1, frag_size = 112, num_frags = 11 size = 862, j = 2, frag_size = 112, num_frags = 10 size = 974, j = 3, frag_size = 112, num_frags = 9 size = 1126, j = 4, frag_size = 152, num_frags = 8 size = 1330, j = 5, frag_size = 204, num_frags = 7 size = 1534, j = 6, frag_size = 204, num_frags = 6 size = 356, j = 1, frag_size = 204, num_frags = 5 size = 560, j = 2, frag_size = 204, num_frags = 4 size = 764, j = 3, frag_size = 204, num_frags = 3 size = 968, j = 4, frag_size = 204, num_frags = 2 size = 1140, j = 5, frag_size = 172, num_frags = 1 result: linearize = 0, j = 6 Change-ID: I79bb1aeab0af255fe2ce28e93672a85d85bf47e8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-06-01
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Various VTI tunnel (mark handling, PMTU) bug fixes from Alexander Duyck and Steffen Klassert. 2) Revert ethtool PHY query change, it wasn't correct. The PHY address selected by the driver running the PHY to MAC connection decides what PHY address GET ethtool operations return information from. 3) Fix handling of sequence number bits for encryption IV generation in ESP driver, from Herbert Xu. 4) UDP can return -EAGAIN when we hit a bad checksum on receive, even when there are other packets in the receive queue which is wrong. Just respect the error returned from the generic socket recv datagram helper. From Eric Dumazet. 5) Fix BNA driver firmware loading on big-endian systems, from Ivan Vecera. 6) Fix regression in that we were inheriting the congestion control of the listening socket for new connections, the intended behavior always was to use the default in this case. From Neal Cardwell. 7) Fix NULL deref in brcmfmac driver, from Arend van Spriel. 8) OTP parsing fix in iwlwifi from Liad Kaufman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) vti6: Add pmtu handling to vti6_xmit. Revert "net: core: 'ethtool' issue with querying phy settings" bnx2x: Move statistics implementation into semaphores xen: netback: read hotplug script once at start of day. xen: netback: fix printf format string warning Revert "netfilter: ensure number of counters is >0 in do_replace()" net: dsa: Properly propagate errors from dsa_switch_setup_one tcp: fix child sockets to use system default congestion control if not set udp: fix behavior of wrong checksums sfc: free multiple Rx buffers when required bna: fix soft lock-up during firmware initialization failure bna: remove unreasonable iocpf timer start bna: fix firmware loading on big-endian machines bridge: fix br_multicast_query_expired() bug via-rhine: Resigning as maintainer brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() fails mac80211: Fix mac80211.h docbook comments iwlwifi: nvm: fix otp parsing in 8000 hw family iwlwifi: pcie: fix tracking of cmd_in_flight ip_vti/ip6_vti: Preserve skb->mark after rcv_cb call ...
| * Merge tag 'wireless-drivers-for-davem-2015-06-01' of ↵David S. Miller2015-06-01
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix OTP parsing 8260 * fix powersave handling for 8260 brcmfmac: * fix null pointer crash ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * Merge tag 'iwlwifi-for-kalle-2015-05-28' of ↵Kalle Valo2015-05-28
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * fix OTP parsing 8260 * fix powersave handling for 8260
| | | * iwlwifi: nvm: fix otp parsing in 8000 hw familyLiad Kaufman2015-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The radio cfg DWORD was taken from the wrong place in the 8000 HW family, after a line in the code was wrongly changed by mistake. This broke several 8260 devices. Fixes: 5dd9c68a854a ("iwlwifi: drop support for early versions of 8000") Signed-off-by: Liad Kaufman <liad.kaufman@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| | | * iwlwifi: pcie: fix tracking of cmd_in_flightIlan Peer2015-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cmd_in_flight tracking was introduced to workaround faulty power management hardware, by having the driver keep the NIC awake as long as there are commands in flight. However, some of the code handling this workaround was unconditionally executed, which resulted with an inconsistent state where the driver assumed that the NIC was awake although it wasn't. Fix this by renaming 'cmd_in_flight' to 'cmd_hold_nic_awake' and handling the NIC requested awake state only for hardwares for which the workaround is needed. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| | * | brcmfmac: avoid null pointer access when brcmf_msgbuf_get_pktid() failsArend van Spriel2015-05-28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function brcmf_msgbuf_get_pktid() may return a NULL pointer so the callers should check the return pointer before accessing it to avoid the crash below (see [1]): brcmfmac: brcmf_msgbuf_get_pktid: Invalid packet id 273 (not in use) BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: [<ffffffff8145b225>] skb_pull+0x5/0x50 PGD 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) snd_hda_codec_hdmi bnep mousedev hid_generic ushwmon msr ext4 crc16 mbcache jbd2 sd_mod uas usb_storage ahci libahci libata scsi_mod xhci_pci xhci_hcd usbcore usb_common CPU: 0 PID: 1661 Comm: irq/61-brcmf_pc Tainted: G O 4.0.1-MacbookPro-ARCH #1 Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B02.1503241251 03/24/2015 task: ffff880264203cc0 ti: ffff88025ffe4000 task.ti: ffff88025ffe4000 RIP: 0010:[<ffffffff8145b225>] [<ffffffff8145b225>] skb_pull+0x5/0x50 RSP: 0018:ffff88025ffe7d40 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff88008a33c000 RCX: 0000000000000044 RDX: 0000000000000000 RSI: 000000000000004a RDI: 0000000000000000 RBP: ffff88025ffe7da8 R08: 0000000000000096 R09: 000000000000004a R10: 0000000000000000 R11: 000000000000048e R12: ffff88025ff14f00 R13: 0000000000000000 R14: ffff880263b48200 R15: ffff88008a33c000 FS: 0000000000000000(0000) GS:ffff88026ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 000000000180b000 CR4: 00000000003407f0 Stack: ffffffffa06aed74 ffff88025ffe7dc8 ffff880263b48270 ffff880263b48278 05ea88020000004a 0002ffff81014635 000000001720b2f6 ffff88026ec116c0 ffff880263b48200 0000000000010000 ffff880263b4ae00 ffff880264203cc0 Call Trace: [<ffffffffa06aed74>] ? brcmf_msgbuf_process_rx+0x404/0x480 [brcmfmac] [<ffffffff810cea60>] ? irq_finalize_oneshot.part.30+0xf0/0xf0 [<ffffffffa06afb55>] brcmf_proto_msgbuf_rx_trigger+0x35/0xf0 [brcmfmac] [<ffffffffa06baf2a>] brcmf_pcie_isr_thread_v2+0x8a/0x130 [brcmfmac] [<ffffffff810cea80>] irq_thread_fn+0x20/0x50 [<ffffffff810ceddf>] irq_thread+0x13f/0x170 [<ffffffff810cebf0>] ? wake_threads_waitq+0x30/0x30 [<ffffffff810ceca0>] ? irq_thread_dtor+0xb0/0xb0 [<ffffffff81092a08>] kthread+0xd8/0xf0 [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0 [<ffffffff8156d898>] ret_from_fork+0x58/0x90 [<ffffffff81092930>] ? kthread_create_on_node+0x1c0/0x1c0 Code: 01 83 e2 f7 88 50 01 48 83 c4 08 5b 5d f3 c3 0f 1f 80 00 00 00 00 83 e2 f7 88 50 01 c3 66 0f 1f 84 00 00 00 00 00 0f 1f RIP [<ffffffff8145b225>] skb_pull+0x5/0x50 RSP <ffff88025ffe7d40> CR2: 0000000000000080 ---[ end trace b074c0f90e7c997d ]--- [1] http://mid.gmane.org/20150430193259.GA5630@googlemail.com Cc: <stable@vger.kernel.org> # v3.18, v3.19, v4.0, v4.1 Reported-by: Michael Hornung <mhornung.linux@gmail.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * | | bnx2x: Move statistics implementation into semaphoresYuval Mintz2015-06-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit dff173de84958 ("bnx2x: Fix statistics locking scheme") changed the bnx2x locking around statistics state into using a mutex - but the lock is being accessed via a timer which is forbidden. [If compiled with CONFIG_DEBUG_MUTEXES, logs show a warning about accessing the mutex in interrupt context] This moves the implementation into using a semaphore [with size '1'] instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | xen: netback: read hotplug script once at start of day.Ian Campbell2015-06-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we come to tear things down in netback_remove() and generate the uevent it is possible that the xenstore directory has already been removed (details below). In such cases netback_uevent() won't be able to read the hotplug script and will write a xenstore error node. A recent change to the hypervisor exposed this race such that we now sometimes lose it (where apparently we didn't ever before). Instead read the hotplug script configuration during setup and use it for the lifetime of the backend device. The apparently more obvious fix of moving the transition to state=Closed in netback_remove() to after the uevent does not work because it is possible that we are already in state=Closed (in reaction to the guest having disconnected as it shutdown). Being already in Closed means the toolstack is at liberty to start tearing down the xenstore directories. In principal it might be possible to arrange to unregister the device sooner (e.g on transition to Closing) such that xenstore would still be there but this state machine is fragile and prone to anger... A modern Xen system only relies on the hotplug uevent for driver domains, when the backend is in the same domain as the toolstack it will run the necessary setup/teardown directly in the correct sequence wrt xenstore changes. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | xen: netback: fix printf format string warningIan Campbell2015-06-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/net/xen-netback/netback.c: In function ‘xenvif_tx_build_gops’: drivers/net/xen-netback/netback.c:1253:8: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘int’ [-Wformat=] (txreq.offset&~PAGE_MASK) + txreq.size); ^ PAGE_MASK's type can vary by arch, so a cast is needed. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> ---- v2: Cast to unsigned long, since PAGE_MASK can vary by arch. Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | sfc: free multiple Rx buffers when requiredDaniel Pieczko2015-05-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When Rx packet data must be dropped, all the buffers associated with that Rx packet must be freed. Extend and rename efx_free_rx_buffer() to efx_free_rx_buffers() and loop through all the fragments. By doing so this patch fixes a possible memory leak. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | bna: fix soft lock-up during firmware initialization failureIvan Vecera2015-05-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug in the driver initialization causes soft-lockup if firmware initialization timeout is reached. Polling function bfa_ioc_poll_fwinit() incorrectly calls bfa_nw_iocpf_timeout() when the timeout is reached. The problem is that bfa_nw_iocpf_timeout() calls again bfa_ioc_poll_fwinit()... etc. The bfa_ioc_poll_fwinit() should directly send timeout event for iocpf and the same should be done if firmware download into HW fails. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | bna: remove unreasonable iocpf timer startIvan Vecera2015-05-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver starts iocpf timer prior bnad_ioceth_enable() call and this is unreasonable. This piece of code probably originates from Brocade/Qlogic out-of-box driver during initial import into upstream. This driver uses only one timer and queue to implement multiple timers and this timer is started at this place. The upstream driver uses multiple timers instead of this. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | bna: fix firmware loading on big-endian machinesIvan Vecera2015-05-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Firmware required by bna is stored in appropriate files as sequence of LE32 integers. After loading by request_firmware() they need to be byte-swapped on big-endian arches. Without this conversion the NIC is unusable on big-endian machines. Cc: Rasesh Mody <rasesh.mody@qlogic.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2015-05-29
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull fixes for cpumask and modules from Rusty Russell: "** NOW WITH TESTING! ** Two fixes which got lost in my recent distraction. One is a weird cpumask function which needed to be rewritten, the other is a module bug which is cc:stable" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: cpumask_set_cpu_local_first => cpumask_local_spread, lament module: Call module notifier on failure after complete_formation()
| * | | cpumask_set_cpu_local_first => cpumask_local_spread, lamentRusty Russell2015-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | da91309e0a7e (cpumask: Utility function to set n'th cpu...) created a genuinely weird function. I never saw it before, it went through DaveM. (He only does this to make us other maintainers feel better about our own mistakes.) cpumask_set_cpu_local_first's purpose is say "I need to spread things across N online cpus, choose the ones on this numa node first"; you call it in a loop. It can fail. One of the two callers ignores this, the other aborts and fails the device open. It can fail in two ways: allocating the off-stack cpumask, or through a convoluted codepath which AFAICT can only occur if cpu_online_mask changes. Which shouldn't happen, because if cpu_online_mask can change while you call this, it could return a now-offline cpu anyway. It contains a nonsensical test "!cpumask_of_node(numa_node)". This was drawn to my attention by Geert, who said this causes a warning on Sparc. It sets a single bit in a cpumask instead of returning a cpu number, because that's what the callers want. It could be made more efficient by passing the previous cpu rather than an index, but that would be more invasive to the callers. Fixes: da91309e0a7e8966d916a74cce42ed170fde06bf Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased) Tested-by: Amir Vadai <amirv@mellanox.com> Acked-by: Amir Vadai <amirv@mellanox.com> Acked-by: David S. Miller <davem@davemloft.net>
* | | | xen-netfront: properly destroy queues when removing deviceDavid Vrabel2015-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xennet_remove() freed the queues before freeing the netdevice which results in a use-after-free when free_netdev() tries to delete the napi instances that have already been freed. Fix this by fully destroy the queues (which includes deleting the napi instances) before freeing the netdevice. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | mlx4_core: Fix fallback from MSI-X to INTxBenjamin Poirier2015-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test in mlx4_load_one() to remove MLX4_FLAG_MSI_X expects mlx4_NOP() to fail with -EBUSY. It is also necessary to avoid the reset since the device is not fully reinitialized before calling mlx4_start_hca() a second time. Note that this will also affect mlx4_test_interrupts(), the only other user of MLX4_CMD_NOP. Fixes: f5aef5a ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: Benjamin Poirier <bpoirier@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | xen/netback: Properly initialize credit_bytesRoss Lagerwall2015-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e9ce7cb6b107 ("xen-netback: Factor queue-specific data into queue struct") introduced a regression when moving queue-specific data into the queue struct by failing to set the credit_bytes field. This prevented bandwidth limiting from working. Initialize the field as it was done before multiqueue support was added. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: netxen: correct sysfs bin attribute return codeVladimir Zapolskiy2015-05-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If read() syscall requests unexpected number of bytes from "dimm" binary attribute file, return EINVAL instead of EPERM. At the same time pin down sysfs file size to the fixed sizeof(struct netxen_dimm_cfg), which allows to exploit some missing sanity checks from kernfs (file boundary checks vs offset etc.) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | amd-xgbe-phy: Fix initial mode when autoneg is disabledLendacky, Thomas2015-05-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. This patch fixes a bug introduced by: d9663c8c2149 ("amd-xgbe-phy: Use phydev advertising field vs supported") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: dp83640: fix improper double spin locking.Richard Cochran2015-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A pair of nested spin locks was introduced in commit 63502b8d0 "dp83640: Fix receive timestamp race condition". Unfortunately the 'flags' parameter was reused for the inner lock, clobbering the originally saved IRQ state. This patch fixes the issue by changing the inner lock to plain spin_lock without irqsave. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: dp83640: reinforce locking rules.Richard Cochran2015-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Callers of the ext_write function are supposed to hold a mutex that protects the state of the dialed page, but one caller was missing the lock from the very start, and over time the code has been changed without following the rule. This patch cleans up the call sites in violation of the rule. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: dp83640: fix broken calibration routine.Richard Cochran2015-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the calibration function that corrects the initial offsets among multiple devices only works the first time. If the function is called more than once, the calibration fails and bogus offsets will be programmed into the devices. In a well hidden spot, the device documentation tells that trigger indexes 0 and 1 are special in allowing the TRIG_IF_LATE flag to actually work. This patch fixes the issue by using one of the special triggers during the recalibration method. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net: stmmac: create one debugfs dir per net-deviceMathieu Olivari2015-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stmmac DebugFS entries are currently global to the driver. As a result, having more than one stmmac device in the system creates the following error: * ERROR stmmaceth, debugfs create directory failed * stmmac_hw_setup: failed debugFS registration This also results in being able to access the debugfs information for the first registered device only. This patch changes the debugfs structure to have one sub-directory per net-device. Files under "/sys/kernel/debug/stmmaceth" will now show-up under /sys/kernel/debug/stmmaceth/ethN/. Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | net/ibm/emac: fix size of emac dump memory areasIvan Mikhaylov2015-05-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix in send of emac regs dump to ethtool which causing in wrong data interpretation on ethtool layer for MII and EMAC. Signed-off-by: Ivan Mikhaylov <ivan@ru.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Merge tag 'wireless-drivers-for-davem-2015-05-25' of ↵David S. Miller2015-05-25
|\ \ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi: * fix firmware name and other things to enable 3165 * fix bad APMG configuration for 8000 (no AMPG on these devices) * fix MAC address assignment for 8000 * fix firmware debugging triggers (MLME) * fix several bugs in low power states code (net-detect, d0i3) ssb: * fix reboot after device reset for WRT350N v1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-10 08:14:33 -0500