aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
Commit message (Collapse)AuthorAge
* ixgbe: fix typo in enumeration nameDon Skidmore2012-03-28
| | | | | | | | | This was pointed out to me by Xiaojun Zhang on Source Forge. CC: Xiaojun Zhang <zhangxiaojun@sourceforge.net> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* intel: make wired ethernet driver message level consistent (rev2)stephen hemminger2012-03-28
| | | | | | | | | | | | | Dan Carpenter noticed that ixgbevf initial default was different than the rest. But the problem is broader than that, only one Intel driver (ixgb) was doing it almost right. The convention for default debug level should be consistent among Intel drivers and follow established convention. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* e1000: fix vlan processing regressionJiri Pirko2012-03-27
| | | | | | | | | | | | | | | This patch fixes a regression introduced by commit "e1000: do vlan cleanup (799d531)". Apparently some e1000 chips (not mine) are sensitive about the order of setting vlan filter and vlan stripping/inserting functionality. So this patch changes the order so it's the same as before vlan cleanup. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Tested-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* gianfar: Fix possible overrun and simplify interrupt name field creationJoe Perches2012-03-25
| | | | | | | | | | | | | | | Space allocated for int_name_<foo> is insufficient for maximal device name, expand it. Code to create int_name_<foo> is obscure, simplify it by using sprintf. Found by looking for unnecessary \ line continuations. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlcnic: Bug fix for LROAnirban Chakraborty2012-03-23
| | | | | | | | | - After FW reset, IP addresses need to be reprogrammed to FW for LRO to work. This was not happening in context reset path. Fixed it here. - Updated driver version to 5.0.27 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cnic: Fix parity error code conflictMichael Chan2012-03-21
| | | | | | | | | | | | The recently added parity error handling used an error code that was already defined for a different error. This could lead to bnx2x firmware assert. We need to fix this with new error codes that are defined for parity error only. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Fix RSS ring refill race conditionMichael Chan2012-03-21
| | | | | | | | | | | | | | | | | | The RSS feature in tg3 hardware has only one rx producer ring for all RSS rings. NAPI vector 1 is special and handles the refilling of the rx producer ring on behalf of all RSS rings. There is a race condition between these RSS NAPIs and the NAPI[1]. If NAPI[1] finishes checking for refill and then another RSS ring empties the rx producer ring before NAPI[1] exits NAPI, the chip will be completely out of SKBs in the rx producer ring. We fix this by adding a flag tp->rx_refill and rely on napi_schedule()/ napi_complete() to help synchronize it to close the race condition. Update driver version to 3.123. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* sky2: override for PCI legacy power managementstephen hemminger2012-03-21
| | | | | | | | | | | Some BIOS's don't setup power management correctly (what else is new) and don't allow use of PCI Express power control. Add a special exception module parameter to allow working around this issue. Based on slightly different patch by Knut Petersen. Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl> Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'rdma-for-linus' of ↵Linus Torvalds2012-03-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes for the 3.4 merge window from Roland Dreier: "Nothing big really stands out; by patch count lots of fixes to the mlx4 driver plus some cleanups and fixes to the core and other drivers." * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (28 commits) mlx4_core: Scale size of MTT table with system RAM mlx4_core: Allow dynamic MTU configuration for IB ports IB/mlx4: Fix info returned when querying IBoE ports IB/mlx4: Fix possible missed completion event mlx4_core: Report thermal error events mlx4_core: Fix one more static exported function IB: Change CQE "csum_ok" field to a bit flag RDMA/iwcm: Reject connect requests if cmid is not in LISTEN state RDMA/cxgb3: Don't pass irq flags to flush_qp() mlx4_core: Get rid of redundant ext_port_cap flags RDMA/ucma: Fix AB-BA deadlock IB/ehca: Fix ilog2() compile failure IB: Use central enum for speed instead of hard-coded values IB/iser: Post initial receive buffers before sending the final login request IB/iser: Free IB connection resources in the proper place IB/srp: Consolidate repetitive sysfs code IB/srp: Use pr_fmt() and pr_err()/pr_warn() IB/core: Fix SDR rates in sysfs mlx4: Enforce device max FMR maps in FMR alloc IB/mlx4: Set bad_wr for invalid send opcode ...
| * Merge branches 'misc' and 'mlx4' into for-nextRoland Dreier2012-03-12
| |\ | | | | | | | | | | | | | | | | | | Conflicts: drivers/infiniband/hw/mlx4/main.c drivers/net/ethernet/mellanox/mlx4/main.c include/linux/mlx4/device.h
| | * mlx4_core: Scale size of MTT table with system RAMRoland Dreier2012-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current driver defaults to 1M MTT segments, where each segment holds 8 MTT entries. This limits the total memory registered to 8M * PAGE_SIZE which is 32GB with 4K pages. Since systems that have much more memory are pretty common now (at least among systems with InfiniBand hardware), this limit ends up getting hit in practice quite a bit. Handle this by having the driver allocate at least enough MTT entries to cover 2 * totalram pages. Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * mlx4_core: Allow dynamic MTU configuration for IB portsOr Gerlitz2012-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the MTU for IB ports in the driver instead of using the firmware default of 2KB (the driver defaults to 4KB). Allow for dynamic mtu configuration through a new, per-port sysfs entry. Since there's a dependency between the port MTU and the max number of HW VLs the port can support, apply a mim/max approach, using a loop that goes down from the highest possible number of VLs to the lowest, using the firmware return status to know whether the requested number of VLs is possible with a given MTU. For now, as with the dynamic link type change / VPI support, the sysfs entry to change the mtu is exposed only when NOT running in SR-IOV mode. To allow changing the MTU for the master in SR-IOV mode, primary-function-initiated FLR (Function Level Reset) needs to be implemented. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * mlx4_core: Report thermal error eventsJack Morgenstein2012-03-12
| | | | | | | | | | | | | | | | | | | | | | | | Print an error message when a thermal error async event is reported by the HW. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Dotan Barak <dotanb@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * mlx4_core: Fix one more static exported functionRoland Dreier2012-03-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 22c8bff6face ("mlx4_core: Exported functions can't be static") fixed most of this up, but forgot about mlx4_is_slave_active(). Fix this one too. Cc: <stable@vger.kernel.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * mlx4: Enforce device max FMR maps in FMR allocEli Cohen2012-02-26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ConnectX devices have a limit on the number of mappings that can be done on an FMR before having to call sync_tpt. The current mlx4_ib driver reports the limit correctly in max_map_per_fmr in .query_device(), but mlx4_core doesn't check it when actually allocating FMRs. Add a max_fmr_maps field to struct mlx4_caps and enforce this maximum value on FMR allocations. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
| * | mlx4_core: Get rid of redundant ext_port_cap flagsOr Gerlitz2012-03-06
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While doing the work for commit a6f7feae6d ("IB/mlx4: pass SMP vendor-specific attribute MADs to firmware") we realized that the firmware would respond on all sorts of vendor-specific MADs. Therefore commit 97285b7817 ("mlx4_core: Add extended port capabilities support") adds redundant code into the driver, since there's no real reaon to maintain the extended capabilities of the port, as they can be queried on demand (e.g the FDR10 capability). This patch reverts commit 97285b7817 and removes the check for extended caps from the mlx4_ib driver port query flow. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
* | Merge branch 'kmap_atomic' of git://github.com/congwang/linuxLinus Torvalds2012-03-21
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull kmap_atomic cleanup from Cong Wang. It's been in -next for a long time, and it gets rid of the (no longer used) second argument to k[un]map_atomic(). Fix up a few trivial conflicts in various drivers, and do an "evil merge" to catch some new uses that have come in since Cong's tree. * 'kmap_atomic' of git://github.com/congwang/linux: (59 commits) feature-removal-schedule.txt: schedule the deprecated form of kmap_atomic() for removal highmem: kill all __kmap_atomic() [swarren@nvidia.com: highmem: Fix ARM build break due to __kmap_atomic rename] drbd: remove the second argument of k[un]map_atomic() zcache: remove the second argument of k[un]map_atomic() gma500: remove the second argument of k[un]map_atomic() dm: remove the second argument of k[un]map_atomic() tomoyo: remove the second argument of k[un]map_atomic() sunrpc: remove the second argument of k[un]map_atomic() rds: remove the second argument of k[un]map_atomic() net: remove the second argument of k[un]map_atomic() mm: remove the second argument of k[un]map_atomic() lib: remove the second argument of k[un]map_atomic() power: remove the second argument of k[un]map_atomic() kdb: remove the second argument of k[un]map_atomic() udf: remove the second argument of k[un]map_atomic() ubifs: remove the second argument of k[un]map_atomic() squashfs: remove the second argument of k[un]map_atomic() reiserfs: remove the second argument of k[un]map_atomic() ocfs2: remove the second argument of k[un]map_atomic() ntfs: remove the second argument of k[un]map_atomic() ...
| * | net: remove the second argument of k[un]map_atomic()Cong Wang2012-03-20
| | | | | | | | | | | | | | | Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com>
* | | cpsw: Hook up default ndo_change_mtu.David S. Miller2012-03-20
| | | | | | | | | | | | | | | Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | netdev: driver: ethernet: Add TI CPSW driverMugunthan V N2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for TI's CPSW driver. The three port switch gigabit ethernet subsystem provides ethernet packet communication and can be configured as an ethernet switch. Supports 10/100/1000 Mbps. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Sriramakrishnan A G <srk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | netdev: driver: ethernet: add cpsw address lookup engine supportMugunthan V N2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | TI CPSW ethernet switch has a built-in address lookup engine. This patch adds the code necessary for programming this module. Signed-off-by: Cyril Chemparathy <cyril@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | mlx4_core: fix race on comm channelEugenia Emantayev2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent race condition between commands on comm channel. Happened while unloading the driver when switching from event to polling mode. VF got completion on the last command before switching to polling mode, but toggle was not changed. After the fix - VF will not write the next command before toggle is updated. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | fs_enet: Add MPC5125 FEC support and PHY interface selectionVladimir Ermakov2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add compatible string for MPC5125 FEC. The FEC on MPC5125 additionally supports RMII PHY interface. Configure controller/PHY interface type according to the optional phy-connection-type property in the ethernet node. This property should be either "rmii" or "mii". Signed-off-by: Vladimir Ermakov <vooon341@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | ixgbe: Fix issues with SR-IOV loopback when flow control is disabledAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows us to avoid a Tx hang when SR-IOV is enabled. This hang can be triggered by sending small packets at a rate that was triggering Rx missed errors from the adapter while the internal Tx switch and at least one VF are enabled. This was all due to the fact that under heavy stress the Rx FIFO never drained below the flow control high water mark. This resulted in the Tx FIFO being head of line blocked due to the fact that it relies on the flow control high water mark to determine when it is acceptable for the Tx to place a packet in the Rx FIFO. The resolution for this is to set the FCRTH value to the RXPBSIZE - 32 so that even if the ring is almost completely full we can still place Tx packets on the Rx ring and drop incoming Rx traffic if we do not have sufficient space available in the Rx FIFO. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'master' of ↵David S. Miller2012-03-19
|\ \ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
| * | | ixgbe: fix namespace issues when FCoE/DCB is not enabledJeff Kirsher2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Resolve namespace issues when FCoE or DCB is not enabled. The issue is with certain configurations we end up with namespace problems. A simple example: ixgbe_main.c - defines func A() - uses func A() ixgbe_fcoe.c - uses func A() ixgbe.h - has prototype for func A() For default (FCoE included) all is good. But when it isn't the namespace checker complains about how func A() could be static. To resolve this, created a ixgbe_lib file to contain functions used by DCB/FCoE and their helper functions so that they are always in namespace whether or not DCB/FCoE is enabled. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
| * | | ixgbe: Correct flag values set by ixgbe_fix_featuresAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the variable name data with the variable name features for ixgbe_fix_features and ixgbe_set_features. This helps to make some issues more obvious such as the fact that we were disabling Rx VLAN tag stripping when we should have been forcing it to be enabled when DCB is enabled. In addition there was deprecated code present that was disabling the LRO flag if we had the itr value set too low. I have updated this logic so that we will now allow the LRO flag to be set, but will not enable RSC until the rx-usecs value is high enough to allow enough time for Rx packet coalescing. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: Add support for enabling UDP RSS via the ethtool rx-flow-hash commandAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for enabling or disabling UDP RSS via the ethtool -N rx-flow-hash command. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: Whitespace cleanupsAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch contains several fixes for formatting in regards to whitespace. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: Two minor fixes for RSS and FDIR set queues functionsAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change fixes two minor issues. The first was the fact that we were setting the return value to false twice in the set_rss_queues function. The second is the fact that we should have been using "min_t(int," instead of "min((int)" in set_fdir_queues. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: drop err_eeprom tag which is at same location as err_sw_initAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The err_eeprom and err_sw_init tags both go to the same location. So instead of maintaining two tags this patch combines them so we only use err_sw_init. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: Move poll routine in order to improve readabilityAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change relocates the ixgbe_poll routine so it is right next to the interrupt routine that schedules and calls it. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: cleanup logic for the service timer and VF hang detectionAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change just cleans up some of the logic in the service_timer function so that we can avoid unnecessary swapping of the ready value between true to false and back to true. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: Update layout of ixgbe_ring structure to improve cache performanceAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes it so that only the 2nd cache line in the ring structure should see frequent updates. The advantage to this is that it should reduce the amount of cross CPU cache bouncing since only the 2nd cache line will be changing between most network transactions. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | ixgbe: Store Tx flags and protocol information to tx_buffer soonerAlexander Duyck2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This change makes it so that we store the tx_flags and protocol information to the tx_buffer_info structure sooner. This allows us to avoid unnecessary read/write transactions since we are placing the data in the final location earlier. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | | | igbvf: Use ETH_ALENJoe Perches2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove an unnecessary #define and use memcpy instead of a loop to copy an ethernet address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | atlx: Use ETH_ALENJoe Perches2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No need for yet another #define for this. Convert NODE_ADDRESS_SIZE use to ETH_ALEN and remove #define. Use memcpy instead of a loop to copy an address. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: validate FW trace prior to its printingDmitry Kravkov2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: consistent statistics for old FWYuval Mintz2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously applied patch making the bnx2x statistics consistent did not apply to old FWs. This remedies it, extending the consistent behaviour to all drivers. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: changed iscsi/fcoe mac init and macrosDmitry Kravkov2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This includes changes in macros to better distinguish between the two protocols, and slightly changed the way their macs are set. Notice this file contains string print lines with more than 80 characters, as to not break prints. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: added TLV_NOT_FOUND flags to the dcbDmitry Kravkov2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new error flags are supported by the bnx2x FW. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: changed initial dcb configurationDmitry Kravkov2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The changes were mostly made to enable back-to-back data flow with dcb. Other changes were simply deemed as a better 'clean' initial configuration. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: removed dcb unused codeYuval Mintz2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: reduced sparse warningsYuval Mintz2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reduces sparse warnings in the bnx2x code, mostly by changing functions into static and changing initialization of structures. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: revised driver printsMerav Sicron2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've revised driver prints, changing the mask of existing prints to allow better control over the debug messages, added prints to error scenarios, removed unnecessary prints and corrected some spelling. Please note that this patch contains lines with over 80 characters, as string messages were kept in a single line. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | bnx2x: added 'likely' to fast-path skb existenceYuval Mintz2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | be2net: fix programming of VLAN tags for VFAjit Khaparde2012-03-19
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | be2net: Fix number of vlan slots in flex modeAjit Khaparde2012-03-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In flex10 mode the number of vlan slots supported is halved. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | be2net: Program secondary UC MAC address into MAC filterAjit Khaparde2012-03-19
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | be2net: enable WOL by default if h/w supports itAjit Khaparde2012-03-19
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-01-15 09:21:22 -0500