aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/i915/intel_display.c
Commit message (Collapse)AuthorAge
...
| * drm/i915: Add correct hw/sw config check for DSI encoderShobhit Kumar2014-08-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check in vlv_crtc_clock_get if DPLL is enabled before calling dpio read. It will not be enabled for DSI and avoid dpio read WARN dumps. Absence of ->get_config was causing other WARN dumps as well. Update dpll_hw_state as well correctly v2: Address review comments by Daniel - Check if DPLL is enabled rather than checking pipe output type - set adjusted_mode->flags to 0 in compute_config rather than using pipe_config->quirks - Add helper function in intel_dsi_pll.c and use that in intel_dsi.c - updated dpll_hw_state correctly - Updated commit message and title v3: Address review comments by Imre - Proper masking of P1, M1 fields while computing divisors - assert in case of bpp mismatch - guard for divide by 0 while computing pclk - Use ARRAY_SIZE instead of direct calculation Signed-off-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | drm/i915: Update scanline_offset only for active crtcsVille Syrjälä2014-08-06
| | | | | | | | | | | | | | | | | | | | | | | | | | | | update_scanline_offset() in intel_sanitize_crtc() was supposed to be called only for active crtcs. But due to some underrun patches it now gets updated for all crtcs on gmch platforms. Move the update_scanline_offset() to the very beginning of intel_sanitize_crtc() where we update the vblank state. This seems like a better place anyway since the scanline offset ought to be up to date before we might need to consult it. So before any vblanky stuff happens. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | drm/i915: Warn if drm_vblank_get() still works after drm_vblank_off()Ville Syrjälä2014-08-06
|/ | | | | | | | | | v2: Drop the drm_vblank_off() (Daniel) Use drm_crtc_vblank_{get,put}() Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* Merge tag 'v3.16' into drm-nextDave Airlie2014-08-04
|\ | | | | | | | | | | | | | | | | | | Linux 3.16 backmerge requested by i915, nouveau and radeon authors Conflicts: drivers/gpu/drm/i915/i915_gem_render_state.c drivers/gpu/drm/i915/intel_drv.h
| * drm/i915: Track the primary plane correctly when reassigning planesDaniel Vetter2014-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 98ec77397a5c68ce753dc283aaa6f4742328bcdd Author: Ville Syrjälä <ville.syrjala@linux.intel.com> Date: Wed Apr 30 17:43:01 2014 +0300 drm/i915: Make primary_enabled match the actual hardware state introduced more accurate tracking of the primary plane and some checks. It missed the plane->pipe reassignement code for gen2/3 though, which the checks caught and resulted in WARNING backtraces. Since we only use this path if the plane is on and on the wrong pipe we can just always set the tracking bit to "enabled". Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * drm/i915: Ignore VBT backlight presence check on HP Chromebook 14Scot Doyle2014-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c675949ec58ca50d5a3ae3c757892f1560f6e896 drm/i915: do not setup backlight if not available according to VBT caused a regression on the HP Chromebook 14 (with Celeron 2955U CPU), which has a misconfigured VBT. Apply quirk to ignore the VBT backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Tested-by: Stefan Nagy <public@stefan-nagy.at> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * drm/i915: Toshiba CB35 has a controllable backlightScot Doyle2014-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Toshiba CB35 Chromebook (with Celeron 2955U CPU) has a controllable backlight although its VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Patch tested by author on Toshiba CB35. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> CC: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * drm/i915: Acer C720 and C720P have controllable backlightsScot Doyle2014-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Acer C720 and C720P Chromebooks (with Celeron 2955U CPU) have a controllable backlight although their VBT reports otherwise. Apply quirk to ignore the backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley <jagduley@gmail.com> Tested-by: Michael Mullin <masmullin@gmail.com> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> CC: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * drm/i915: quirk asserts controllable backlight presence, overriding VBTScot Doyle2014-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c675949ec58ca50d5a3ae3c757892f1560f6e896 Author: Jani Nikula <jani.nikula@intel.com> Date: Wed Apr 9 11:31:37 2014 +0300 drm/i915: do not setup backlight if not available according to VBT caused a regression on machines with a misconfigured VBT. Add a quirk to assert the presence of a controllable backlight. Use it to ignore the VBT backlight presence check during backlight setup. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79813 Tested-by: James Duley <jagduley@gmail.com> Tested-by: Michael Mullin <masmullin@gmail.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Scot Doyle <lkml14@scotdoyle.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org # 3.15 only [danvet: Add cc: stable because the regressing commit is in 3.15.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | Merge remote-tracking branch 'airlied/drm-next' into drm-intel-nextDaniel Vetter2014-07-29
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull in drm-next with Dave's DP MST support so that I can merge some conflicting patches which also touch the driver load sequencing around interrupt handling. Conflicts: drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_dp.c Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
| * | drm/i915: add DP 1.2 MST support (v0.7)Dave Airlie2014-07-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds DP 1.2 MST support on Haswell systems. Notes: a) this reworks irq handling for DP MST ports, so that we can avoid the mode config locking in the current hpd handlers, as we need to process up/down msgs at a better time. Changes since v0.1: use PORT_PCH_HOTPLUG to detect short vs long pulses add a workqueue to deal with digital events as they can get blocked on the main workqueue beyong mode_config mutex fix a bunch of modeset checker warnings acks irqs in the driver cleanup the MST encoders Changes since v0.2: check irq status again in work handler move around bring up and tear down to fix DPMS on/off use path properties. Changes since v0.3: updates for mst apis more state checker fixes irq handling improvements fbcon handling support improved reference counting of link - fixes redocking. Changes since v0.4: handle gpu reset hpd reinit without oopsing check link status on HPD irqs fix suspend/resume Changes since v0.5: use proper functions to get max link/lane counts fix another checker backtrace - due to connectors disappearing. set output type in more places fro, unknown->displayport don't talk to devices if no HPD asserted check mst on short irqs only check link status properly rebase onto prepping irq changes. drop unsued force_act Changes since v0.6: cleanup unused struct entry. [airlied: fix some sparse warnings]. Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm/i915: split conversion function out into separate functionDave Airlie2014-07-21
| | | | | | | | | | | | | | | | | | for MST I need to reuse this, so just move it now. Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | drm/i915: check connector->encoder before using it.Dave Airlie2014-07-21
| | | | | | | | | | | | | | | | | | | | | | | | DP MST will need connectors that aren't connected to specific encoders, add some checks in advance to avoid oopses. Reviewed-by: Todd Previte <tprevite@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | Merge tag 'drm-intel-next-2014-07-11' of ↵Dave Airlie2014-07-19
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next - fbc improvements when stolen memory is tight (Ben) - cdclk handling improvements for vlv/chv (Ville) - proper fix for stuck primary planes on gmch platforms with cxsr (Imre&Ebgert Eich) - gen8 hw semaphore support (Ben) - more execlist prep work from Oscar Mateo - locking fixes for primary planes (Matt Roper) - code rework to support runtime pm for dpms on hsw/bdw (Paulo, Imre & me), but not yet enabled because some fixes from Paulo haven't made the cut - more gpu boost tuning from Chris - as usual piles of little things all over * tag 'drm-intel-next-2014-07-11' of git://anongit.freedesktop.org/drm-intel: (93 commits) drm/i915: Make the RPS interrupt generation mask handle the vlv wa drm/i915: Move RPS evaluation interval counters to i915->rps drm/i915: Don't cast a pointer to void* unnecessarily drm/i915: don't read LVDS regs at compute_config time drm/i915: check the power domains in intel_lvds_get_hw_state() drm/i915: check the power domains in ironlake_get_pipe_config() drm/i915: don't skip shared DPLL assertion on LPT drm/i915: Only touch WRPLL hw state in enable/disable hooks drm/i915: Switch to common shared dpll framework for WRPLLs drm/i915: ->enable hook for WRPLLs drm/i915: ->disable hook for WRPLLs drm/i915: State readout support for WRPLLs drm/i915: add POWER_DOMAIN_PLLS drm/i915: Document that the pll->mode_set hook is optional drm/i915: Basic shared dpll support for WRPLLs drm/i915: Precompute static ddi_pll_sel values in encoders drm/i915: BDW also has special-purpose DP DDI clocks drm/i915: State readout and cross-checking for ddi_pll_sel drm/i915: Move ddi_pll_sel into the pipe config drm/i915: Add a debugfs file for the shared dpll state ...
| * | | drm/i915: use helpersRob Clark2014-07-18
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| * | | Merge tag 'drm-intel-next-2014-06-20' of ↵Dave Airlie2014-07-08
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next - Accurate frontbuffer tracking and frontbuffer rendering invalidate, flush and flip events. This is prep work for proper PSR support and should also be useful for DRRS&fbc. - Runtime suspend hardware on system suspend to support the new SOix sleep states, from Jesse. - PSR updates for broadwell (Rodrigo) - Universal plane support for cursors (Matt Roper), including core drm patches. - Prefault gtt mappings (Chris) - baytrail write-enable pte bit support (Akash Goel) - mmio based flips (Sourab Gupta) instead of blitter ring flips - interrupt handling race fixes (Oscar Mateo) And old, not yet merged features from the previous round: - rps/turbo support for chv (Deepak) - some other straggling chv patches (Ville) - proper universal plane conversion for the primary plane (Matt Roper) - ppgtt on vlv from Jesse - pile of cleanups, little fixes for insane corner cases and improved debug support all over * tag 'drm-intel-next-2014-06-20' of git://anongit.freedesktop.org/drm-intel: (99 commits) drm/i915: Update DRIVER_DATE to 20140620 drivers/i915: Fix unnoticed failure of init_ring_common() drm/i915: Track frontbuffer invalidation/flushing drm/i915: Use new frontbuffer bits to increase pll clock drm/i915: don't take runtime PM reference around freeze/thaw drm/i915: use runtime irq suspend/resume in freeze/thaw drm/i915: Properly track domain of the fbcon fb drm/i915: Print obj->frontbuffer_bits in debugfs output drm/i915: Introduce accurate frontbuffer tracking drm/i915: Drop schedule_back from psr_exit drm/i915: Ditch intel_edp_psr_update drm/i915: Drop unecessary complexity from psr_inactivate drm/i915: Remove ctx->last_ring drm/i915/chv: Ack interrupts before handling them (CHV) drm/i915/bdw: Ack interrupts before handling them (GEN8) drm/i915/vlv: Ack interrupts before handling them (VLV) drm/i915: Ack interrupts before handling them (GEN5 - GEN7) drm/i915: Don't BUG_ON in i915_gem_obj_offset drm/i915: Grab dev->struct_mutex in i915_gem_pageflip_info drm/i915: Add some L3 registers to the parser whitelist ... Conflicts: drivers/gpu/drm/i915/i915_drv.c
| * \ \ \ Merge tag 'topic/core-stuff-2014-06-30' of ↵Dave Airlie2014-07-07
| |\ \ \ \ | | |_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel into drm-next misc core patches picked up by Daniel and Jani. * tag 'topic/core-stuff-2014-06-30' of git://anongit.freedesktop.org/drm-intel: drm/fb-helper: Remove unnecessary list empty check in drm_fb_helper_debug_enter() drm/fb-helper: Redundant info->fix.type_aux setting in drm_fb_helper_fill_fix() drm/debugfs: add an "edid_override" file per connector drm/debugfs: add a "force" file per connector drm: add register and unregister functions for connectors drm: fix uninitialized acquire_ctx fields (v2) drm: Driver-specific ioctls range from 0x40 to 0x9f drm: Don't export internal module variables
| | * | | drm: add register and unregister functions for connectorsThomas Wood2014-06-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce generic functions to register and unregister connectors. This provides a common place to add and remove associated user space interfaces. Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: Returning from increase/decrease of pllclock when invalidSonika Jindal2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v2: Adding !HAS_GMCH_DISPLAY(dev) Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: Setting legacy palette correctly for different platformsSonika Jindal2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | v2: Adding !HAS_GMCH_DISPLAY(dev) Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: Writing proper check for reading of pipe status regSonika Jindal2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: remove plane/cursor/pipe assertions from intel_crtc_disablePaulo Zanoni2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we merged runtime PM support for DPMS, it is possible that these assertions will be called when the power wells are disabled but a mode is "set", resulting in "failed assertion" and "device suspended while reading register" WARNs. To reproduce the bug: disable all screens using mode unset, do a modeset on one screen, disable it using DPMS, then try to do a mode unset on it again to see the WARNs. v2: The first version of this patch changed the assertions to also check the power domains. Daniel suggested that it would be better to just remove the assertions: "The modeset state checker will already notice when we've failed to turn off the pipe. And we check cursors and plane state in the enable sequence, too. Since we use these asserts a lot to lock down the precise modeset sequence I actually prefer if they're a bit dumb and don't check the power wells." Testcase: igt/rpm_rpm/dpms-mode-unset-lpsp Testcase: igt/rpm_rpm/dpms-mode-unset-non-lpsp Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: mark IRQs as disabled on unloadJesse Barnes2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To avoid more spew with the new warnings. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: add helper for checking whether IRQs are enabledJesse Barnes2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we use the runtime IRQ enable/disable functions in our suspend path, we can simply check the pm._irqs_disabled flag everywhere. So rename it to catch the users, and add an inline for it to make the checks clear everywhere. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: HSW_BLC_PWM2_CTL doesn't exist on BDWPaulo Zanoni2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So don't write it, otherwise we will trigger unclaimed register errors. Testcase: igt/pm_rpm/rte Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: Fix up PSR frontbuffer trackingDaniel Vetter2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I've tried to split this up, but all the changes are so tightly related that I didn't find a good way to do this without breaking bisecting. Essentially this completely changes how psr is glued into the overall driver, and there's not much you can do to soften such a paradigm change. - Use frontbuffer tracking bits stuff to separate disable and re-enable. - Don't re-check everything in the psr work. We have now accurate tracking for everything, so no need to check for sprites or tiling really. Allows us to ditch tons of locks. - That in turn allows us to properly cancel the work in the disable function - no more deadlocks. - Add a check for HSW sprites and force a flush. Apparently the hardware doesn't forward the flushing when updating the sprite base address. We can do the same trick everywhere else we have such issues, e.g. on baytrail with ... everything. - Don't re-enable psr with a delay in psr_exit. It really must be turned off forever if we detect a gtt write. At least with the current frontbuffer render tracking. Userspace can do a busy ioctl call or no-op pageflip to re-enable psr. - Drop redundant checks for crtc and crtc->active - now that they're only called from enable this is guaranteed. - Fix up the hsw port check. eDP can also happen on port D, but the issue is exactly that it doesn't work there. So an || check is wrong. - We still schedule the psr work with a delay. The frontbuffer flushing interface mandates that we upload the next full frame, so need to wait a bit. Once we have single-shot frame uploads we can do better here. v2: Don't enable psr initially, rely upon the fb flush of the initial plane setup for that. Gives us more unified code flow and makes the crtc enable sequence less a special case. v3: s/psr_exit/psr_invalidate/ for consistency v4: Fixup whitespace. v5: Correctly bail out of psr_invalidate/flush when dev_priv->psr.enabled is NULL. Spotted by Rodrigo. v6: - Only schedule work when there's work to do. Fixes WARNINGs reported by Rodrigo. - Comments Chris requested to clarify the code. v7: Fix conflict on rebase (Rodrigo) Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v6) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: Power gating display wells during i915_pm_suspendBorun Fu2014-07-23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On VLV, after i915_pm_suspend display power wells are staying power ungated. So, after initiating mem sleep "echo mem > /sys/power/state" Display is staing D0 State. There might be better way/place to power gate these wells. Also, we need to make sure that if wells are power gated due to DPMS OFF sequence, they need not be turned off by i915_pm_suspend again. v2: Extracted helper for intel_crtc_disable and power gating CRTC power wells. [Daniel] Cc: Imre Deak <imre.deak@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Change-Id: I34c80da66aa24c423a5576c68aa1f3a8d0f43848 Signed-off-by: Borun Fu <borun.fu@intel.com> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: Call encoder->post_disable() in intel_sanitize_encoder()Ville Syrjälä2014-07-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | VLV and CHV disable the DP port only in the .post_disable() hook, so we need to make intel_sanitize_encoder() call that when it's trying to disable encoders without an active pipes. My bsw actaully hits this when an external display is connected. The BIOS still likes to turn on the eDP port, but leaves the pipe disabled. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rafael Barbalho <rafael.barbalho@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | | drm/i915: ddi: enable runtime pm during dpmsDaniel Vetter2014-07-11
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Remove now bogus comment.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: check the power domains in ironlake_get_pipe_config()Paulo Zanoni2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just like we already do in haswell_get_pipe_config(). This should prevent some WARNs when we run pm_rpm on SNB. Testcase: igt/pm_rpm Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: don't skip shared DPLL assertion on LPTPaulo Zanoni2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we now have support for shared DPLLS. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Only touch WRPLL hw state in enable/disable hooksDaniel Vetter2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To be able to do this we need to separately keep track of how many crtcs need a given WRPLL and how many actually actively use it. The common shared dpll framework already has all this, including massive state readout and cross checking. Which allows us to do this switch in a fairly small patch. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Switch to common shared dpll framework for WRPLLsDaniel Vetter2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mostly this patch is one big excersize in deleting code and asserts which are no longer needed. Note that we still abuse the shared dpll framework a bit since we call the enable/disable functions from the crtc mode_set and off hooks. But changing the actual hardware sequence will be done in the next step. Note that besides the massive amount of changes in this patch the places and order in which the low-level WRPLL code is called is absolutely unchanged. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [imre: rebased on patchset version w/o pch/crt/fdi refactoring] Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: ->disable hook for WRPLLsDaniel Vetter2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently still with a redudant WARN_ON in there, the common shared dpll code will take care of this in the future. Also we need to flip the switch for the transitional hack now to make sure that we disable the right pll. Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: State readout support for WRPLLsDaniel Vetter2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Still tacked onto the side, but slowly getting there. v2: Don't forget the debugfs file. v3 (from Paulo): Don't forget to check the power domains. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: add POWER_DOMAIN_PLLSPaulo Zanoni2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And get/put it when needed. The special thing about this commit is that it will now return false in ibx_pch_dpll_get_hw_state() in case the power domain is not enabled. This will fix some WARNs we have when we run pm_rpm on SNB. Testcase: igt/pm_rpm Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=80463 Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Basic shared dpll support for WRPLLsDaniel Vetter2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Just filing in names and ids, but not yet officially registering them so that the hw state cross checker doesn't completely freak out about them. Still since we do already read out and cross check config->shared_dpll the basics are now there to flesh out the wrpll shared dpll implementation. The idea is now to roll out all the callbacks step-by-step and then at the end switch to the shared dpll framework. This way hw and sw changes are clearly separated. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> [imre: added const to hsw_ddi_pll_names (Damien)] Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: State readout and cross-checking for ddi_pll_selDaniel Vetter2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To make things a bit more manageable extract a new function for reading out common ddi port state. This means a bit of duplication between encoders and the core since both look at the same registers, but doesn't seem worth to make a fuzz about. We can also remove the state readout code in intel_ddi_setup_hw_pll_state. That code is only called from the hardware take over and not the cross check code, and only after the crtc state is reconstructed. So we can rely on an accurate value of crtc->config.ddi_pll_sel already. Compared to the old code also trust the hw state more and don't special-case port A - we want to cross-check the actual-state, not bake in our own assumptions about how this is supposed to all be linked up. v2: Make use of the read-out ddi_pll_sel in intel_ddi_clock_get. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> [imre: rebased on patchset version w/o pch/crt/fdi refactoring] Signed-off-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: ddi: move pch cleanup before encoder->post_disableImre Deak2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed by an upcoming patch that moves the PCH/CRT PLL disabling into the post_disable hook, after which we want to keep the modeset sequence at its current state. At this point this won't have an effect since the PCH/CRT post_disable hook is atm a NOP. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: ddi: move pch setup after encoder->pre_enableImre Deak2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed by an upcoming patch that moves the PCH/CRT PLL enabling into the pre_enable hook, after which we want to keep the modeset sequence at its current state. At this point this won't have an effect since the PCH/CRT pre_enable hook is atm a NOP. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Check hw state in assert_can_disable_lcpllDaniel Vetter2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All the other checks also check hw state, so checking our software refcounts for the plls looks a bit odd. Also this will simplify the conversion over to the shared dpll framework, which itself has massive amounts of checks to make sure that we never leave a display pll enabled when we shouldn't. So after that conversion we should stil have a good enough coverage of asserts for entering pc8/runtime pm on hsw/bdw. Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Add a couple WARN()'s to catch missing locksMatt Roper2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add !mutex_is_locked() checks to intel_pin_and_fence_fb_obj() and intel_unpin_fb_obj() to help catch failures to grab struct_mutex when operating on fb objects. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Add missing locking to primary plane handlersMatt Roper2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | intel_primary_plane_{setplane,disable} were lacking struct_mutex locking around their GEM operations. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reported-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: fix D_COMP usage on BDWPaulo Zanoni2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On HSW, the D_COMP register can be accessed through the mailbox (read and write) or through MMIO on a MCHBAR offset (read only). On BDW, the access should be done through MMIO on another address. So to account for all these cases, create hsw_read_dcomp() with the correct implementation for reading, and also fix hsw_write_dcomp() to do the correct thing on BDW. With this patch, we can now get back from the PC8+ state on BDW. We were previously getting a black screen and lots of dmesg errors. Please notice that the bug only happens when you actually reach the PC8+ states, not when you only allow it. Testcase: igt/pm_rpm/rte Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: fix hsw_write_dcomp() error messagePaulo Zanoni2014-07-10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | That function can be used to write anything on D_COMP, not just disable it, so print a more appropriate message. Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Make use of intel_fb_obj() (v2)Matt Roper2014-07-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This should hopefully simplify the display code slightly and also solves at least one mistake in intel_pipe_set_base() where to_intel_framebuffer(fb)->obj is referenced during local variable initialization, before 'if (!fb)' gets checked. Potential uses of this macro were identified via the following Coccinelle patch: @@ expression E; @@ * to_intel_framebuffer(E)->obj @@ expression E; identifier I; @@ I = to_intel_framebuffer(E); ... * I->obj v2: Rewrite some NULL tests in terms of the obj rather than the fb. Also add a WARN() if trying to pageflip with a disabled primary plane. [Suggested by Chris Wilson] Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Use mmio flips to change tiling mode on BaytrailChris Wilson2014-07-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For whatever reason, MI_DISPLAY_FLIP fails to change tiling mode on Baytrail, so just use CPU driven mmio flips instead. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76176 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Disable RCS flips on IvybridgeChris Wilson2014-07-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We currently see random GPU hangs when using RCS flips with multiple pipes on Ivybridge. Now that we have mmio flips, we can fairly cheaply fallback to using CPU driven flips instead. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77104 Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | drm/i915: Support pf CRC source on haswell transcoder edpDaniel Vetter2014-07-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The always-on power well pixel path on haswell is routed such that it bypasses the panel fitter when we use is. Which means the pfit CRC source won't work in that configuration. Add a new disallow-bypass flags to the pfit pipe config state and set it when we want to use the pf CRC. Results in a bit of flicker, but should get the job done. We'll also undo do it afterwards to make sure other tests arent' negatively affected. Totally untested due to lack of hsw laptops around here. v2: s/disallow_bypass/force_power_well_on/ to avoid a double negative (Damien). v3: force_thru because roadsigns. v4: Don't forget the power wells! Also note that until the runtime pm for DPMS series is fully merged the simple disable/enable trick won't work since the ->crtc_mode_set callback is still required to do nasty things. This stuff is tricky, but I think by both fixing up get_crtc_power_domains and the debugfs wa code we should always grab/drop the additional power well correctly. v5: Wrap in () as suggested by Damien to avoid setting reserved values for the edp transcoder path on bdw+ References: https://bugs.freedesktop.org/show_bug.cgi?id=72864 Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Tested-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* | | | DRM/i915: Remove magic to prevent blank screen on gen4 chipsetsEgbert Eich2014-07-07
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the root cause is understood now and with the fix commit 564ed191f5d816d24501664296991ec70327e2bc Author: Imre Deak <imre.deak@intel.com> Date: Fri Jun 13 14:54:21 2014 +0300 drm/i915: gmch: fix stuck primary plane due to memory self-refresh mode in place the magic for G4x chipsets introduced with commit commit 61bc95c1fbbb6a08b55bbe161fdf1ea5493fc595 Author: Egbert Eich <eich@suse.com> Date: Mon Mar 4 09:24:38 2013 -0500 DRM/i915: On G45 enable cursor plane briefly after enabling the display plane. to avoided occasional screen blanking on mode changes can finally be removed. It's been verified that Imre's fix also resolves the said issue. Signed-off-by: Egbert Eich <eich@suse.de> Tested-by: Stefan Dirsch <sndirsch@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
generated by cgit v1.2.2 (git 2.25.0) at 2025-08-10 01:37:25 -0400