aboutsummaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/setup.c
Commit message (Collapse)AuthorAge
* Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds2015-04-13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Ingo Molnar: "The main changes in this cycle were: - reduce the x86/32 PAE per task PGD allocation overhead from 4K to 0.032k (Fenghua Yu) - early_ioremap/memunmap() usage cleanups (Juergen Gross) - gbpages support cleanups (Luis R Rodriguez) - improve AMD Bulldozer (family 0x15) ASLR I$ aliasing workaround to increase randomization by 3 bits (per bootup) (Hector Marco-Gisbert) - misc fixlets" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Improve AMD Bulldozer ASLR workaround x86/mm/pat: Initialize __cachemode2pte_tbl[] and __pte2cachemode_tbl[] in a bit more readable fashion init.h: Clean up the __setup()/early_param() macros x86/mm: Simplify probe_page_size_mask() x86/mm: Further simplify 1 GB kernel linear mappings handling x86/mm: Use early_param_on_off() for direct_gbpages init.h: Add early_param_on_off() x86/mm: Simplify enabling direct_gbpages x86/mm: Use IS_ENABLED() for direct_gbpages x86/mm: Unexport set_memory_ro() and set_memory_rw() x86/mm, efi: Use early_ioremap() in arch/x86/platform/efi/efi-bgrt.c x86/mm: Use early_memunmap() instead of early_iounmap() x86/mm/pat: Ensure different messages in STRICT_DEVMEM and PAT cases x86/mm: Reduce PAE-mode per task pgd allocation overhead from 4K to 32 bytes
| * x86/mm: Use early_memunmap() instead of early_iounmap()Juergen Gross2015-02-24
| | | | | | | | | | | | | | | | | | | | Memory mapped via early_memremap() should be unmapped with early_memunmap() instead of early_iounmap(). Signed-off-by: Juergen Gross <jgross@suse.com> Cc: matt.fleming@intel.com Link: http://lkml.kernel.org/r/1424769211-11378-2-git-send-email-jgross@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | x86/mm/KASLR: Propagate KASLR status to kernel properBorislav Petkov2015-04-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit: e2b32e678513 ("x86, kaslr: randomize module base load address") made module base address randomization unconditional and didn't regard disabled KKASLR due to CONFIG_HIBERNATION and command line option "nokaslr". For more info see (now reverted) commit: f47233c2d34f ("x86/mm/ASLR: Propagate base load address calculation") In order to propagate KASLR status to kernel proper, we need a single bit in boot_params.hdr.loadflags and we've chosen bit 1 thus leaving the top-down allocated bits for bits supposed to be used by the bootloader. Originally-From: Jiri Kosina <jkosina@suse.cz> Suggested-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | Revert "x86/mm/ASLR: Propagate base load address calculation"Borislav Petkov2015-03-16
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit: f47233c2d34f ("x86/mm/ASLR: Propagate base load address calculation") The main reason for the revert is that the new boot flag does not work at all currently, and in order to make this work, we need non-trivial changes to the x86 boot code which we didn't manage to get done in time for merging. And even if we did, they would've been too risky so instead of rushing things and break booting 4.1 on boxes left and right, we will be very strict and conservative and will take our time with this to fix and test it properly. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: H. Peter Anvin <hpa@linux.intel.com Cc: Jiri Kosina <jkosina@suse.cz> Cc: Josh Triplett <josh@joshtriplett.org> Cc: Junjie Mao <eternal.n08@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20150316100628.GD22995@pd.tnic Signed-off-by: Ingo Molnar <mingo@kernel.org>
* Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2015-02-21
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: "This contains: - EFI fixes - a boot printout fix - ASLR/kASLR fixes - intel microcode driver fixes - other misc fixes Most of the linecount comes from an EFI revert" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/ASLR: Avoid PAGE_SIZE redefinition for UML subarch x86/microcode/intel: Handle truncated microcode images more robustly x86/microcode/intel: Guard against stack overflow in the loader x86, mm/ASLR: Fix stack randomization on 64-bit systems x86/mm/init: Fix incorrect page size in init_memory_mapping() printks x86/mm/ASLR: Propagate base load address calculation Documentation/x86: Fix path in zero-page.txt x86/apic: Fix the devicetree build in certain configs Revert "efi/libstub: Call get_memory_map() to obtain map and desc sizes" x86/efi: Avoid triple faults during EFI mixed mode calls
| * Merge branch 'tip-x86-kaslr' of ↵Ingo Molnar2015-02-19
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp into x86/urgent Pull ASLR and kASLR fixes from Borislav Petkov: - Add a global flag announcing KASLR state so that relevant code can do informed decisions based on its setting. (Jiri Kosina) - Fix a stack randomization entropy decrease bug. (Hector Marco-Gisbert) Signed-off-by: Ingo Molnar <mingo@kernel.org>
| | * x86/mm/ASLR: Propagate base load address calculationJiri Kosina2015-02-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit: e2b32e678513 ("x86, kaslr: randomize module base load address") makes the base address for module to be unconditionally randomized in case when CONFIG_RANDOMIZE_BASE is defined and "nokaslr" option isn't present on the commandline. This is not consistent with how choose_kernel_location() decides whether it will randomize kernel load base. Namely, CONFIG_HIBERNATION disables kASLR (unless "kaslr" option is explicitly specified on kernel commandline), which makes the state space larger than what module loader is looking at. IOW CONFIG_HIBERNATION && CONFIG_RANDOMIZE_BASE is a valid config option, kASLR wouldn't be applied by default in that case, but module loader is not aware of that. Instead of fixing the logic in module.c, this patch takes more generic aproach. It introduces a new bootparam setup data_type SETUP_KASLR and uses that to pass the information whether kaslr has been applied during kernel decompression, and sets a global 'kaslr_enabled' variable accordingly, so that any kernel code (module loading, livepatching, ...) can make decisions based on its value. x86 module loader is converted to make use of this flag. Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Kees Cook <keescook@chromium.org> Cc: "H. Peter Anvin" <hpa@linux.intel.com> Link: https://lkml.kernel.org/r/alpine.LNX.2.00.1502101411280.10719@pobox.suse.cz [ Always dump correct kaslr status when panicking ] Signed-off-by: Borislav Petkov <bp@suse.de>
* | | Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2015-02-16
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf updates from Ingo Molnar: "This series tightens up RDPMC permissions: currently even highly sandboxed x86 execution environments (such as seccomp) have permission to execute RDPMC, which may leak various perf events / PMU state such as timing information and other CPU execution details. This 'all is allowed' RDPMC mode is still preserved as the (non-default) /sys/devices/cpu/rdpmc=2 setting. The new default is that RDPMC access is only allowed if a perf event is mmap-ed (which is needed to correctly interpret RDPMC counter values in any case). As a side effect of these changes CR4 handling is cleaned up in the x86 code and a shadow copy of the CR4 value is added. The extra CR4 manipulation adds ~ <50ns to the context switch cost between rdpmc-capable and rdpmc-non-capable mms" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Add /sys/devices/cpu/rdpmc=2 to allow rdpmc for all tasks perf/x86: Only allow rdpmc if a perf_event is mapped perf: Pass the event to arch_perf_update_userpage() perf: Add pmu callbacks to track event mapping and unmapping x86: Add a comment clarifying LDT context switching x86: Store a per-cpu shadow copy of CR4 x86: Clean up cr4 manipulation
| * | | x86: Store a per-cpu shadow copy of CR4Andy Lutomirski2015-02-04
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Context switches and TLB flushes can change individual bits of CR4. CR4 reads take several cycles, so store a shadow copy of CR4 in a per-cpu variable. To avoid wasting a cache line, I added the CR4 shadow to cpu_tlbstate, which is already touched in switch_mm. The heaviest users of the cr4 shadow will be switch_mm and __switch_to_xtra, and __switch_to_xtra is called shortly after switch_mm during context switch, so the cacheline is likely to be hot. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Kees Cook <keescook@chromium.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Vince Weaver <vince@deater.net> Cc: "hillf.zj" <hillf.zj@alibaba-inc.com> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/3a54dd3353fffbf84804398e00dfdc5b7c1afd7d.1414190806.git.luto@amacapital.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
* | | x86_64: add KASan supportAndrey Ryabinin2015-02-14
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds arch specific code for kernel address sanitizer. 16TB of virtual addressed used for shadow memory. It's located in range [ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup stacks. At early stage we map whole shadow region with zero page. Latter, after pages mapped to direct mapping address range we unmap zero pages from corresponding shadow (see kasan_map_shadow()) and allocate and map a real shadow memory reusing vmemmap_populate() function. Also replace __pa with __pa_nodebug before shadow initialized. __pa with CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr) __phys_addr is instrumented, so __asan_load could be called before shadow area initialized. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Jim Davis <jim.epost@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | x86, setup: Let early_memremap() handle page alignmentWANG Chao2015-01-23
|/ | | | | | | | | | | | | | | | early_memremap() takes care of page alignment and map size, so we can just remap the required data size and get rid of the adjustments in the setup code. [tglx: Massaged changelog ] Signed-off-by: WANG Chao <chaowang@redhat.com> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Link: http://lkml.kernel.org/r/1420628150-16872-1-git-send-email-chaowang@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds2014-12-10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso updates from Ingo Molnar: "Various vDSO updates from Andy Lutomirski, mostly cleanups and reorganization to improve maintainability, but also some micro-optimizations and robustization changes" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86_64/vsyscall: Restore orig_ax after vsyscall seccomp x86_64: Add a comment explaining the TASK_SIZE_MAX guard page x86_64,vsyscall: Make vsyscall emulation configurable x86_64, vsyscall: Rewrite comment and clean up headers in vsyscall code x86_64, vsyscall: Turn vsyscalls all the way off when vsyscall==none x86,vdso: Use LSL unconditionally for vgetcpu x86: vdso: Fix build with older gcc x86_64/vdso: Clean up vgetcpu init and merge the vdso initcalls x86_64/vdso: Remove jiffies from the vvar page x86/vdso: Make the PER_CPU segment 32 bits x86/vdso: Make the PER_CPU segment start out accessed x86/vdso: Change the PER_CPU segment to use struct desc_struct x86_64/vdso: Move getcpu code from vsyscall_64.c to vdso/vma.c x86_64/vsyscall: Move all of the gate_area code to vsyscall_64.c
| * x86_64,vsyscall: Make vsyscall emulation configurableAndy Lutomirski2014-11-03
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds CONFIG_X86_VSYSCALL_EMULATION, guarded by CONFIG_EXPERT. Turning it off completely disables vsyscall emulation, saving ~3.5k for vsyscall_64.c, 4k for vsyscall_emu_64.S (the fake vsyscall page), some tiny amount of core mm code that supports a gate area, and possibly 4k for a wasted pagetable. The latter is because the vsyscall addresses are misaligned and fit poorly in the fixmap. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Link: http://lkml.kernel.org/r/406db88b8dd5f0cbbf38216d11be34bbb43c7eae.1414618407.git.luto@amacapital.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | x86, mpx: On-demand kernel allocation of bounds tablesDave Hansen2014-11-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is really the meat of the MPX patch set. If there is one patch to review in the entire series, this is the one. There is a new ABI here and this kernel code also interacts with userspace memory in a relatively unusual manner. (small FAQ below). Long Description: This patch adds two prctl() commands to provide enable or disable the management of bounds tables in kernel, including on-demand kernel allocation (See the patch "on-demand kernel allocation of bounds tables") and cleanup (See the patch "cleanup unused bound tables"). Applications do not strictly need the kernel to manage bounds tables and we expect some applications to use MPX without taking advantage of this kernel support. This means the kernel can not simply infer whether an application needs bounds table management from the MPX registers. The prctl() is an explicit signal from userspace. PR_MPX_ENABLE_MANAGEMENT is meant to be a signal from userspace to require kernel's help in managing bounds tables. PR_MPX_DISABLE_MANAGEMENT is the opposite, meaning that userspace don't want kernel's help any more. With PR_MPX_DISABLE_MANAGEMENT, the kernel won't allocate and free bounds tables even if the CPU supports MPX. PR_MPX_ENABLE_MANAGEMENT will fetch the base address of the bounds directory out of a userspace register (bndcfgu) and then cache it into a new field (->bd_addr) in the 'mm_struct'. PR_MPX_DISABLE_MANAGEMENT will set "bd_addr" to an invalid address. Using this scheme, we can use "bd_addr" to determine whether the management of bounds tables in kernel is enabled. Also, the only way to access that bndcfgu register is via an xsaves, which can be expensive. Caching "bd_addr" like this also helps reduce the cost of those xsaves when doing table cleanup at munmap() time. Unfortunately, we can not apply this optimization to #BR fault time because we need an xsave to get the value of BNDSTATUS. ==== Why does the hardware even have these Bounds Tables? ==== MPX only has 4 hardware registers for storing bounds information. If MPX-enabled code needs more than these 4 registers, it needs to spill them somewhere. It has two special instructions for this which allow the bounds to be moved between the bounds registers and some new "bounds tables". They are similar conceptually to a page fault and will be raised by the MPX hardware during both bounds violations or when the tables are not present. This patch handles those #BR exceptions for not-present tables by carving the space out of the normal processes address space (essentially calling the new mmap() interface indroduced earlier in this patch set.) and then pointing the bounds-directory over to it. The tables *need* to be accessed and controlled by userspace because the instructions for moving bounds in and out of them are extremely frequent. They potentially happen every time a register pointing to memory is dereferenced. Any direct kernel involvement (like a syscall) to access the tables would obviously destroy performance. ==== Why not do this in userspace? ==== This patch is obviously doing this allocation in the kernel. However, MPX does not strictly *require* anything in the kernel. It can theoretically be done completely from userspace. Here are a few ways this *could* be done. I don't think any of them are practical in the real-world, but here they are. Q: Can virtual space simply be reserved for the bounds tables so that we never have to allocate them? A: As noted earlier, these tables are *HUGE*. An X-GB virtual area needs 4*X GB of virtual space, plus 2GB for the bounds directory. If we were to preallocate them for the 128TB of user virtual address space, we would need to reserve 512TB+2GB, which is larger than the entire virtual address space today. This means they can not be reserved ahead of time. Also, a single process's pre-popualated bounds directory consumes 2GB of virtual *AND* physical memory. IOW, it's completely infeasible to prepopulate bounds directories. Q: Can we preallocate bounds table space at the same time memory is allocated which might contain pointers that might eventually need bounds tables? A: This would work if we could hook the site of each and every memory allocation syscall. This can be done for small, constrained applications. But, it isn't practical at a larger scale since a given app has no way of controlling how all the parts of the app might allocate memory (think libraries). The kernel is really the only place to intercept these calls. Q: Could a bounds fault be handed to userspace and the tables allocated there in a signal handler instead of in the kernel? A: (thanks to tglx) mmap() is not on the list of safe async handler functions and even if mmap() would work it still requires locking or nasty tricks to keep track of the allocation state there. Having ruled out all of the userspace-only approaches for managing bounds tables that we could think of, we create them on demand in the kernel. Based-on-patch-by: Qiaowei Ren <qiaowei.ren@intel.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: linux-mm@kvack.org Cc: linux-mips@linux-mips.org Cc: Dave Hansen <dave@sr71.net> Link: http://lkml.kernel.org/r/20141114151829.AD4310DE@viggo.jf.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* | x86, cma: Reserve DMA contiguous area after initmem_init()Weijie Yang2014-10-28
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fengguang Wu reported a boot crash on the x86 platform via the 0-day Linux Kernel Performance Test: cma: dma_contiguous_reserve: reserving 31 MiB for global area BUG: Int 6: CR2 (null) [<41850786>] dump_stack+0x16/0x18 [<41d2b1db>] early_idt_handler+0x6b/0x6b [<41072227>] ? __phys_addr+0x2e/0xca [<41d4ee4d>] cma_declare_contiguous+0x3c/0x2d7 [<41d6d359>] dma_contiguous_reserve_area+0x27/0x47 [<41d6d4d1>] dma_contiguous_reserve+0x158/0x163 [<41d33e0f>] setup_arch+0x79b/0xc68 [<41d2b7cf>] start_kernel+0x9c/0x456 [<41d2b2ca>] i386_start_kernel+0x79/0x7d (See details at: https://lkml.org/lkml/2014/10/8/708) It is because dma_contiguous_reserve() is called before initmem_init() in x86, the variable high_memory is not initialized but accessed by __pa(high_memory) in dma_contiguous_reserve(). This patch moves dma_contiguous_reserve() after initmem_init() so that high_memory is initialized before accessed. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: iamjoonsoo.kim@lge.com Cc: 'Linux-MM' <linux-mm@kvack.org> Cc: 'Weijie Yang' <weijie.yang.kh@gmail.com> Link: http://lkml.kernel.org/r/000101cfef69%2431e528a0%2495af79e0%24%25yang@samsung.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* x86: Quark: Comment setup_arch() to document TLB/PGE bugBryan O'Donoghue2014-10-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quark SoC X1000 advertises Page Global Enable for it's Translation Lookaside Buffer via cpuid. The silicon does not in fact support PGE and hence will not flush the TLB when CR4.PGE is rewritten. The Quark documentation makes clear the necessity to instead rewrite CR3 in order to flush any TLB entries, irrespective of the state of CR4.PGE or an individual PTE.PGE See Intel Quark Core DevMan_001.pdf section 6.4.11 In setup.c setup_arch() the code will load_cr3() and then do a __flush_tlb_all(). On Quark the entire TLB will be flushed at the load_cr3(). The __flush_tlb_all() have no effect and can be safely ignored. Later on in the boot process we switch off the flag for cpu_has_pge() which means that subsequent calls to __flush_tlb_all() will call __flush_tlb() not __flush_tlb_global() flushing the TLB in the correct way via load_cr3() not CR4.PGE rewrite This patch documents the behaviour of flushing the TLB for Quark in setup_arch() Comment text suggested by Thomas Gleixner Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: davej@redhat.com Cc: hmh@hmh.eng.br Link: http://lkml.kernel.org/r/1412641189-12415-2-git-send-email-pure.logic@nexus-software.ie Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* arch/x86: Replace plain strings with constantsDaniel Kiper2014-07-18
| | | | | | | We've got constants, so let's use them instead of hard-coded values. Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* cma: add placement specifier for "cma=" kernel parameterAkinobu Mita2014-06-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, "cma=" kernel parameter is used to specify the size of CMA, but we can't specify where it is located. We want to locate CMA below 4GB for devices only supporting 32-bit addressing on 64-bit systems without iommu. This enables to specify the placement of CMA by extending "cma=" kernel parameter. Examples: 1. locate 64MB CMA below 4GB by "cma=64M@0-4G" 2. locate 64MB CMA exact at 512MB by "cma=64M@512M" Note that the DMA contiguous memory allocator on x86 assumes that page_address() works for the pages to allocate. So this change requires to limit end address of contiguous memory area upto max_pfn_mapped to prevent from locating it on highmem area by the argument of dma_contiguous_reserve(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'x86-nuke-platforms-for-linus' of ↵Linus Torvalds2014-04-02
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 old platform removal from Peter Anvin: "This patchset removes support for several completely obsolete platforms, where the maintainers either have completely vanished or acked the removal. For some of them it is questionable if there even exists functional specimens of the hardware" Geert Uytterhoeven apparently thought this was a April Fool's pull request ;) * 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, platforms: Remove NUMAQ x86, platforms: Remove SGI Visual Workstation x86, apic: Remove support for IBM Summit/EXA chipset x86, apic: Remove support for ia32-based Unisys ES7000
| * x86, platforms: Remove SGI Visual WorkstationH. Peter Anvin2014-02-27
| | | | | | | | | | | | | | | | | | | | The SGI Visual Workstation seems to be dead; remove support so we don't have to continue maintaining it. Cc: Andrey Panin <pazke@donpac.ru> Cc: Michael Reed <mdr@sgi.com> Link: http://lkml.kernel.org/r/530CFD6C.7040705@zytor.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | Merge remote-tracking branch 'tip/x86/urgent' into efi-for-mingoMatt Fleming2014-03-05
|\ \ | | | | | | | | | | | | Conflicts: arch/x86/include/asm/efi.h
| * | x86/efi: Quirk out SGI UVBorislav Petkov2014-03-04
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alex reported hitting the following BUG after the EFI 1:1 virtual mapping work was merged, kernel BUG at arch/x86/mm/init_64.c:351! invalid opcode: 0000 [#1] SMP Call Trace: [<ffffffff818aa71d>] init_extra_mapping_uc+0x13/0x15 [<ffffffff818a5e20>] uv_system_init+0x22b/0x124b [<ffffffff8108b886>] ? clockevents_register_device+0x138/0x13d [<ffffffff81028dbb>] ? setup_APIC_timer+0xc5/0xc7 [<ffffffff8108b620>] ? clockevent_delta2ns+0xb/0xd [<ffffffff818a3a92>] ? setup_boot_APIC_clock+0x4a8/0x4b7 [<ffffffff8153d955>] ? printk+0x72/0x74 [<ffffffff818a1757>] native_smp_prepare_cpus+0x389/0x3d6 [<ffffffff818957bc>] kernel_init_freeable+0xb7/0x1fb [<ffffffff81535530>] ? rest_init+0x74/0x74 [<ffffffff81535539>] kernel_init+0x9/0xff [<ffffffff81541dfc>] ret_from_fork+0x7c/0xb0 [<ffffffff81535530>] ? rest_init+0x74/0x74 Getting this thing to work with the new mapping scheme would need more work, so automatically switch to the old memmap layout for SGI UV. Acked-by: Russ Anderson <rja@sgi.com> Cc: Alex Thorlton <athorlton@sgi.com Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* / efi: Move facility flags to struct efiMatt Fleming2014-03-04
|/ | | | | | | | | | | | | | As we grow support for more EFI architectures they're going to want the ability to query which EFI features are available on the running system. Instead of storing this information in an architecture-specific place, stick it in the global 'struct efi', which is already the central location for EFI state. While we're at it, let's change the return value of efi_enabled() to be bool and replace all references to 'facility' with 'feature', which is the usual word used to describe the attributes of the running system. Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* x86: revert wrong memblock current limit settingYinghai Lu2014-01-28
| | | | | | | | | | | | | | | | | | | | | | | | | | Dave reported big numa system booting is broken. It turns out that commit 5b6e529521d3 ("x86: memblock: set current limit to max low memory address") sets the limit to low wrongly. max_low_pfn_mapped is different from max_pfn_mapped. max_low_pfn_mapped is always under 4G. That will memblock_alloc_nid all go under 4G. Revert 5b6e529521d3 to fix a no-boot regression which was triggered by 457ff1de2d24 ("lib/swiotlb.c: use memblock apis for early memory allocations"). Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reported-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* x86: memblock: set current limit to max low memory addressSantosh Shilimkar2014-01-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The memblock current limit value is used to limit early boot memory allocations below max low memory address by default, as the kernel can access only to the low memory. Hence, set memblock current limit value to the max mapped low memory address instead of max mapped memory address. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tejun Heo <tj@kernel.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'x86-kaslr-for-linus' of ↵Linus Torvalds2014-01-20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 kernel address space randomization support from Peter Anvin: "This enables kernel address space randomization for x86" * 'x86-kaslr-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, kaslr: Clarify RANDOMIZE_BASE_MAX_OFFSET x86, kaslr: Remove unused including <linux/version.h> x86, kaslr: Use char array to gain sizeof sanity x86, kaslr: Add a circular multiply for better bit diffusion x86, kaslr: Mix entropy sources together as needed x86/relocs: Add percpu fixup for GNU ld 2.23 x86, boot: Rename get_flags() and check_flags() to *_cpuflags() x86, kaslr: Raise the maximum virtual address to -1 GiB on x86_64 x86, kaslr: Report kernel offset on panic x86, kaslr: Select random position from e820 maps x86, kaslr: Provide randomness functions x86, kaslr: Return location from decompress_kernel x86, boot: Move CPU flags out of cpucheck x86, relocs: Add more per-cpu gold special cases
| * x86, kaslr: Report kernel offset on panicKees Cook2013-10-13
| | | | | | | | | | | | | | | | | | When the system panics, include the kernel offset in the report to assist in debugging. Signed-off-by: Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/1381450698-28710-6-git-send-email-keescook@chromium.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | Merge branch 'x86-microcode-for-linus' of ↵Linus Torvalds2014-01-20
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 microcode loader updates from Ingo Molnar: "There are two main changes in this tree: - AMD microcode early loading fixes - some microcode loader source files reorganization" * 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, microcode: Move to a proper location x86, microcode, AMD: Fix early ucode loading x86, microcode: Share native MSR accessing variants x86, ramdisk: Export relocated ramdisk VA
| * | x86, ramdisk: Export relocated ramdisk VABorislav Petkov2014-01-13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ramdisk can possibly get relocated if the whole image is not mapped. And since we're going over it in the microcode loader and fishing out the relevant microcode patches, we want access it at its new location. Thus, export it. Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
* | | x86: Reserve setup_data ranges late after parsing memmap cmdlineDave Young2013-12-29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently e820_reserve_setup_data() is called before parsing early params, it works in normal case. But for memmap=exactmap, the final memory ranges are created after parsing memmap= cmdline params, so the previous e820_reserve_setup_data() has no effect. For example, setup_data ranges will still be marked as normal system ram, thus when later sysfs driver ioremap them kernel will warn about mapping normal ram. This patch fix it by moving the e820_reserve_setup_data() callback after parsing early params so they can be set as reserved ranges and later ioremap will be fine with it. Signed-off-by: Dave Young <dyoung@redhat.com> Acked-by: Borislav Petkov <bp@suse.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | | x86/efi: Pass necessary EFI data for kexec via setup_dataDave Young2013-12-29
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new setup_data type SETUP_EFI for kexec use. Passing the saved fw_vendor, runtime, config tables and EFI runtime mappings. When entering virtual mode, directly mapping the EFI runtime regions which we passed in previously. And skip the step to call SetVirtualAddressMap(). Specially for HP z420 workstation we need save the smbios physical address. The kernel boot sequence proceeds in the following order. Step 2 requires efi.smbios to be the physical address. However, I found that on HP z420 EFI system table has a virtual address of SMBIOS in step 1. Hence, we need set it back to the physical address with the smbios in efi_setup_data. (When it is still the physical address, it simply sets the same value.) 1. efi_init() - Set efi.smbios from EFI system table 2. dmi_scan_machine() - Temporary map efi.smbios to access SMBIOS table 3. efi_enter_virtual_mode() - Map EFI ranges Tested on ovmf+qemu, lenovo thinkpad, a dell laptop and an HP z420 workstation. Signed-off-by: Dave Young <dyoung@redhat.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
* | x86, acpi, crash, kdump: do reserve_crashkernel() after SRAT is parsed.Tang Chen2013-11-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Memory reserved for crashkernel could be large. So we should not allocate this memory bottom up from the end of kernel image. When SRAT is parsed, we will be able to know which memory is hotpluggable, and we can avoid allocating this memory for the kernel. So reorder reserve_crashkernel() after SRAT is parsed. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | DMI: Parse memory device (type 17) in SMBIOSChen, Gong2013-10-23
|/ | | | | | | | | | | | This patch adds a new interface to decode memory device (type 17) to help error reporting on DIMMs. Original-author: Tony Luck <tony.luck@intel.com> Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
* Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds2013-09-04
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 mm changes from Ingo Molnar: "Misc smaller fixes: - a parse_setup_data() boot crash fix - a memblock and an __early_ioremap cleanup - turn the always-on CONFIG_ARCH_MEMORY_PROBE=y into a configurable option and turn it off - it's an unrobust debug facility, it shouldn't be enabled by default" * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: avoid remapping data in parse_setup_data() x86: Use memblock_set_current_limit() to set limit for memblock. mm: Remove unused variable idx0 in __early_ioremap() mm/hotplug, x86: Disable ARCH_MEMORY_PROBE by default
| * x86: avoid remapping data in parse_setup_data()Linn Crosetto2013-08-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Type SETUP_PCI, added by setup_efi_pci(), may advertise a ROM size larger than early_memremap() is able to handle, which is currently limited to 256kB. If this occurs it leads to a NULL dereference in parse_setup_data(). To avoid this, remap the setup_data header and allow parsing functions for individual types to handle their own data remapping. Signed-off-by: Linn Crosetto <linn@hp.com> Link: http://lkml.kernel.org/r/1376430401-67445-1-git-send-email-linn@hp.com Acked-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
| * x86: Use memblock_set_current_limit() to set limit for memblock.Tang Chen2013-08-14
| | | | | | | | | | | | | | | | | | | | In setup_arch() of x86, it set memblock.current_limit directly. We should use memblock_set_current_limit(). If the implementation is changed, it is easy to maintain. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Link: http://lkml.kernel.org/r/1376451844-15682-1-git-send-email-tangchen@cn.fujitsu.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | x86, asmlinkage: Make several variables used from assembler/linker script ↵Andi Kleen2013-08-06
|/ | | | | | | | | | visible Plus one function, load_gs_index(). Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1375740170-7446-10-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86: delete __cpuinit usage from all x86 filesPaul Gortmaker2013-07-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* mm/x86: prepare for removing num_physpages and simplify mem_init()Jiang Liu2013-07-03
| | | | | | | | | | | | | | | Prepare for removing num_physpages and simplify mem_init(). Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Jianguo Wu <wujianguo@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dump_stack: implement arch-specific hardware description in task dumpsTejun Heo2013-04-30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | x86 and ia64 can acquire extra hardware identification information from DMI and print it along with task dumps; however, the usage isn't consistent. * x86 show_regs() collects vendor, product and board strings and print them out with PID, comm and utsname. Some of the information is printed again later in the same dump. * warn_slowpath_common() explicitly accesses the DMI board and prints it out with "Hardware name:" label. This applies to both x86 and ia64 but is irrelevant on all other archs. * ia64 doesn't show DMI information on other non-WARN dumps. This patch introduces arch-specific hardware description used by dump_stack(). It can be set by calling dump_stack_set_arch_desc() during boot and, if exists, printed out in a separate line with "Hardware name:" label. dmi_set_dump_stack_arch_desc() is added which sets arch-specific description from DMI data. It uses dmi_ids_string[] which is set from dmi_present() used for DMI debug message. It is superset of the information x86 show_regs() is using. The function is called from x86 and ia64 boot code right after dmi_scan_machine(). This makes the explicit DMI handling in warn_slowpath_common() unnecessary. Removed. show_regs() isn't yet converted to use generic debug information printing and this patch doesn't remove the duplicate DMI handling in x86 show_regs(). The next patch will unify show_regs() handling and remove the duplication. An example WARN dump follows. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... v2: Use the same string as the debug message from dmi_present() which also contains BIOS information. Move hardware name into its own line as warn_slowpath_common() did. This change was suggested by Bjorn Helgaas. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds2013-04-30
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: "Small fixes and cleanups all over the map" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/setup: Drop unneeded include <asm/dmi.h> x86/olpc/xo1/sci: Don't call input_free_device() after input_unregister_device() x86/platform/intel/mrst: Remove cast for kmalloc() return value x86/platform/uv: Replace kmalloc() & memset with kzalloc()
| * x86/setup: Drop unneeded include <asm/dmi.h>Jean Delvare2013-04-25
| | | | | | | | | | | | | | | | | | | | arch/x86/kernel/setup.c includes <asm/dmi.h> but it doesn't look like it needs it, <linux/dmi.h> is sufficient. Signed-off-by: Jean Delvare <jdelvare@suse.de> Link: http://lkml.kernel.org/r/1366881845.4186.65.camel@chaos.site Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: "H. Peter Anvin" <hpa@zytor.com>
* | Merge branch 'x86-cpu-for-linus' of ↵Linus Torvalds2013-04-30
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpuid changes from Ingo Molnar: "The biggest change is x86 CPU bug handling refactoring and cleanups, by Borislav Petkov" * 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, CPU, AMD: Drop useless label x86, AMD: Correct {rd,wr}msr_amd_safe warnings x86: Fold-in trivial check_config function x86, cpu: Convert AMD Erratum 400 x86, cpu: Convert AMD Erratum 383 x86, cpu: Convert Cyrix coma bug detection x86, cpu: Convert FDIV bug detection x86, cpu: Convert F00F bug detection x86, cpu: Expand cpufeature facility to include cpu bugs
| * | x86, cpu: Convert FDIV bug detectionBorislav Petkov2013-04-02
| |/ | | | | | | | | | | | | | | | | ... to the new facility. Add a reference to the wikipedia article explaining the FDIV test we're doing here. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1363788448-31325-4-git-send-email-bp@alien8.de Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* | x86, kdump: Change crashkernel_high/low= to crashkernel=,high/lowYinghai Lu2013-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Per hpa, use crashkernel=X,high crashkernel=Y,low instead of crashkernel_hign=X crashkernel_low=Y. As that could be extensible. -v2: according to Vivek, change delimiter to ; -v3: let hign and low only handle simple form and it conforms to description in kernel-parameters.txt still keep crashkernel=X override any crashkernel=X,high crashkernel=Y,low -v4: update get_last_crashkernel returning and add more strict checking in parse_crashkernel_simple() found by HATAYAMA. -v5: Change delimiter back to , according to HPA. also separate parse_suffix from parse_simper according to vivek. so we can avoid @pos in that path. -v6: Tight the checking about crashkernel=X,highblahblah,high found by HTYAYAMA. Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1366089828-19692-5-git-send-email-yinghai@kernel.org Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | x86, kdump: Retore crashkernel= to allocate under 896MYinghai Lu2013-04-17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Vivek found old kexec-tools does not work new kernel anymore. So change back crashkernel= back to old behavoir, and add crashkernel_high= to let user decide if buffer could be above 4G, and also new kexec-tools will be needed. -v2: let crashkernel=X override crashkernel_high= update description about _high will be ignored by crashkernel=X -v3: update description about kernel-parameters.txt according to Vivek. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1366089828-19692-4-git-send-email-yinghai@kernel.org Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* | x86, kdump: Set crashkernel_low automaticallyYinghai Lu2013-04-17
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Chao said that kdump does does work well on his system on 3.8 without extra parameter, even iommu does not work with kdump. And now have to append crashkernel_low=Y in first kernel to make kdump work. We have now modified crashkernel=X to allocate memory beyong 4G (if available) and do not allocate low range for crashkernel if the user does not specify that with crashkernel_low=Y. This causes regression if iommu is not enabled. Without iommu, swiotlb needs to be setup in first 4G and there is no low memory available to second kernel. Set crashkernel_low automatically if the user does not specify that. For system that does support IOMMU with kdump properly, user could specify crashkernel_low=0 to save that 72M low ram. -v3: add swiotlb_size() according to Konrad. -v4: add comments what 8M is for according to hpa. also update more crashkernel_low= in kernel-parameters.txt -v5: update changelog according to Vivek. -v6: Change description about swiotlb referring according to HATAYAMA. Reported-by: WANG Chao <chaowang@redhat.com> Tested-by: WANG Chao <chaowang@redhat.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1366089828-19692-2-git-send-email-yinghai@kernel.org Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
* x86: Fix 32-bit *_cpu_data initializersKrzysztof Mazur2013-03-06
| | | | | | | | | | | | | | | | | | | | | The commit 27be457000211a6903968dfce06d5f73f051a217 ('x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag') removed the hlt_works_ok flag from struct cpuinfo_x86, but boot_cpu_data and new_cpu_data initializers were not changed causing setting f00f_bug flag, instead of fdiv_bug. If CONFIG_X86_F00F_BUG is not set the f00f_bug flag is never cleared. To avoid such problems in future C99-style initialization is now used. Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net> Acked-by: Borislav Petkov <bp@suse.de> Cc: len.brown@intel.com Link: http://lkml.kernel.org/r/1362266082-2227-1-git-send-email-krzysiek@podlesie.net Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
* x86, ACPI, mm: Revert movablemem_map supportYinghai Lu2013-03-02
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map") 42f47e27e761 ("page_alloc: make movablemem_map have higher priority") 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter") 4d59a75125d5 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Don Morris <don.morris@hp.com> Bisected-by: Don Morris <don.morris@hp.com> Tested-by: Don Morris <don.morris@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds2013-02-27
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/EFI changes from Peter Anvin: - Improve the initrd handling in the EFI boot stub by allowing forward slashes in the pathname - from Chun-Yi Lee. - Cleanup code duplication in the EFI mixed kernel/firmware code - from Satoru Takeuchi. - efivarfs bug fixes for more strict filename validation, with lots of input from Al Viro. * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, efi: remove duplicate code in setup_arch() by using, efi_is_native() efivarfs: guid part of filenames are case-insensitive efivarfs: Validate filenames much more aggressively efivarfs: Use sizeof() instead of magic number x86, efi: Allow slash in file path of initrd
generated by cgit v1.2.2 (git 2.25.0) at 2024-11-18 15:01:20 -0500