aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/sram34xx.S
Commit message (Collapse)AuthorAge
* ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific filesPaul Walmsley2012-10-21
| | | | | | | | | | | | | | | | Move OMAP3xxx-specific CM functions & macros into cm3xxx.[ch] and OMAP2xxx-specific macros into cm2xxx.[ch]. Move basic CM register access functions into static inline functions in cm2xxx_3xxx.h, leaving only OMAP2/3 hardreset functions in cm2xxx_3xxx.c. As part of this, split the CM and hwmod code that waits for devices to become ready into SoC-specific functions. This is in preparation for the upcoming move of this code to drivers/. Signed-off-by: Paul Walmsley <paul@pwsan.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+Tony Lindgren2012-09-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: OMAP2+: Move most of plat/io.h into local iomap.hTony Lindgren2012-02-24
| | | | | | | | | | | | There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge branch 'omap-for-linus' of ↵Linus Torvalds2011-03-17
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (258 commits) omap: zoom: host should not pull up wl1271's irq line arm: plat-omap: iommu: fix request_mem_region() error path OMAP2+: Common CPU DIE ID reading code reads wrong registers for OMAP4430 omap4: mux: Remove duplicate mux modes omap: iovmm: don't check 'da' to set IOVMF_DA_FIXED flag omap: iovmm: disallow mapping NULL address when IOVMF_DA_ANON is set omap2+: mux: Fix compile when CONFIG_OMAP_MUX is not selected omap4: board-omap4panda: Initialise the serial pads omap3: board-3430sdp: Initialise the serial pads omap4: board-4430sdp: Initialise the serial pads omap2+: mux: Add macro for configuring static with omap_hwmod_mux_init omap2+: mux: Remove the use of IDLE flag omap2+: Add separate list for dynamic pads to mux perf: add OMAP support for the new power events OMAP4: Add IVA OPP enteries. OMAP4: Update Voltage Rail Values for MPU, IVA and CORE OMAP4: Enable 800 MHz and 1 GHz MPU-OPP OMAP3+: OPP: Replace voltage values with Macros OMAP3: wdtimer: Fix CORE idle transition Watchdog: omap_wdt: add fine grain runtime-pm ... Fix up various conflicts in - arch/arm/mach-omap2/board-omap3evm.c - arch/arm/mach-omap2/clock3xxx_data.c - arch/arm/mach-omap2/usb-musb.c - arch/arm/plat-omap/include/plat/usb.h - drivers/usb/musb/musb_core.h
| * ARM: omap3: Thumb-2 compatibility for sram34xx.SDave Martin2011-03-09
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Build unconditionally as ARM for correct interoperation with OMAP firmware. * Remove deprecated PC-relative stores * Add the required ENDPROC() directive for each ENTRY(). * .align before data words Signed-off-by: Dave Martin <dave.martin@linaro.org> Tested-by: Jean Pihet <j-pihet@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
* | ARM: 6649/1: omap: use fncpy to copy the PM code functions to SRAMJean Pihet2011-02-04
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | The new fncpy API is better suited* for copying some code to SRAM at runtime. This patch changes the ad-hoc code to the more generic fncpy API. *: 1. fncpy ensures that the thumb mode bit is propagated, 2. fncpy provides the security of type safety between the original function and the sram function pointer. Tested OK on OMAP3 in low power modes (RET/OFF) using omap2plus_defconfig with !CONFIG_THUMB2_KERNEL. Compile tested on OMAP1/2 using omap1_defconfig. Boot tested on OMAP1 & OMAP2 Tested OK with suspend/resume on OMAP2420/n810 Boots fine on osk5912 and n800 Signed-off-by: Jean Pihet <j-pihet@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Dave Martin <dave.martin@linaro.org> Tested-by: Kevin Hilman <khilman@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* OMAP2/3: SRAM: add comment about crashes during a TLB missPaul Walmsley2010-12-21
| | | | | | | | | | | | | | | | | | Some users were observing crashes during the execution of CORE DVFS code from OCM RAM -- a locally-modified copy of the linux-omap code. Richard Woodruff tracked this down to a DTLB miss which had been inadvertently and intermittently caused by the local modifications. (The TLB miss caused the ARM MMU to attempt to walk the page tables stored in SDRAM, which was not possible since SDRAM is off-line for a portion of the CORE DVFS OCM RAM code.) Add a note to the OMAP2 & OMAP3 CORE DVFS SRAM code to warn others that changes may result in crashes here if they are not carefully tested. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Jon Hunter <jon-hunter@ti.com> Cc: Nishanth Menon <nm@ti.com>
* OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific filesPaul Walmsley2010-12-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In preparation for adding OMAP4-specific PRCM accessor/mutator functions, split the existing OMAP2/3 PRCM code into OMAP2/3-specific files. Most of what was in mach-omap2/{cm,prm}.{c,h} has now been moved into mach-omap2/{cm,prm}2xxx_3xxx.{c,h}, since it was OMAP2xxx/3xxx-specific. This process also requires the #includes in each of these files to be changed to reference the new file name. As part of doing so, add some comments into plat-omap/sram.c and plat-omap/mcbsp.c, which use "sideways includes", to indicate that these users of the PRM/CM includes should not be doing so. Thanks to Felipe Contreras <felipe.contreras@gmail.com> for comments on this patch. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jarkko Nikula <jhnikula@gmail.com> Cc: Peter Ujfalusi <peter.ujfalusi@nokia.com> Cc: Liam Girdwood <lrg@slimlogic.co.uk> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Acked-by: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Rajendra Nayak <rnayak@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
* omap3: Prevent SDRC deadlock when L3 is changing frequencyJon Hunter2010-09-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When changing the L3 clock frequency, the CPU is executing from internal RAM and the SDRC clock is disabled. During this time accesses made to external DDR are stalled. If the ARM subsystem attempts to access the DDR while the SDRC clock is disabled this will stall the CPU until the access to the SDRC timeouts. A timeout on the SDRC should never occur. Once a timeout occurs all the following accesses will be aborted and the DDR is no longer accessible. Although the code being executed in the internal RAM does not directly access the DDR, it was found that the branch prediction logic in the CPU may cause the CPU to prefetch code from a DDR location while the SDRC clock is disabled. This was causing an SDRC timeout which resulted in a system hang. This patch fixes this problem by ensuring the branch prediction logic is disabled while changing the L3 clock frequency. The branch prediction logic is disabled by clearing the Z-bit in the ARM CTRL register. Disabling the branch prediction logic does not have any noticable impact on the execution time of this code section. The hardware observability signals were used to monitor the sdrc idle time with and without this patch when operating at different CPU frequencies (150MHz, 500MHz and 600MHz) and the total sdrc idle time when changing frequenct was in the range of 9-11us. This was measured on an omap3430 SDP running the omapzoom p-android-omap-2.6.29 branch. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Tony Lindgren <tony@atomide.com>
* OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code ↵Paul Walmsley2009-12-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | behind Kconfig The code that reprograms the SDRC memory controller during CORE DVFS, mach-omap2/sram34xx.S:omap3_sram_configure_core_dpll(), does not ensure that all L3 initiators are prevented from accessing the SDRAM before modifying the SDRC AC timing and MR registers. This can cause memory to be corrupted or cause the SDRC to enter an unpredictable state. This patch places that code behind a Kconfig option, CONFIG_OMAP3_SDRC_AC_TIMING for now, and adds a note explaining what is going on. Ideally the code can be added back in once supporting code is present to ensure that other initiators aren't touching the SDRAM. At the very least, these registers should be reprogrammable during kernel init to deal with buggy bootloaders. Users who know that all other system initiators will not be touching the SDRAM can also re-enable this Kconfig option. This is a modification of a patch originally written by Rajendra Nayak <rnayak@ti.com> (the original is at http://patchwork.kernel.org/patch/51927/). Rather than removing the code completely, this patch just comments it out. Thanks to Benoît Cousson <b-cousson@ti.com> and Christophe Sucur <c-sucur@ti.com> for explaining the technical basis for this and for explaining what can be done to make this path work in future code. Thanks to Richard Woodruff <r-woodruff2@ti.com>, Nishanth Menon <nm@ti.com>, and Olof Johansson <olof@lixom.net> for their comments. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Christophe Sucur <c-sucur@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Olof Johansson <olof@lixom.net>
* OMAP3 SDRC: Move the clk stabilization delay to the right placeRajendra Nayak2009-07-24
| | | | | | | | | The clock stabilization delay post a M2 divider change is needed even before a SDRC interface clock re-enable and not only before jumping back to SDRAM. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 SDRC: Fix freeze when scaling CORE dpll to < 83MhzRajendra Nayak2009-07-24
| | | | | | | | | | | | | | | | | | | This patch fixes a bug in the CORE dpll scaling sequence which was errouneously clearing some bits in the SDRC DLLA CTRL register and hence causing a freeze. The issue was observed only on platforms which scale CORE dpll to < 83Mhz and hence program the DLL in fixed delay mode. Issue reported by Limei Wang <E12499@motorola.com>, with debugging assistance from Richard Woodruff <r-woodruff2@ti.com> and Girish Ghongdemath <girishsg@ti.com>. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Cc: Limei Wang <E12499@motorola.com> Cc: Richard Woodruff <r-woodruff2@ti.com> Cc: Girish Ghongdemath <girishsg@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: updated patch description to include collaboration credits]
* OMAP2/3 SDRC: don't set SDRC_POWER.PWDENA on bootPaul Walmsley2009-07-24
| | | | | | | | | | | | | Stop setting SDRC_POWER.PWDENA on boot. There is a nasty erratum (34xx erratum 1.150) that can cause memory corruption if PWDENA is enabled. Based originally on a patch from Samu P. Onkalo <samu.p.onkalo@nokia.com>. Tested on BeagleBoard rev C2. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Samu P. Onkalo <samu.p.onkalo@nokia.com>
* OMAP3 SDRC: add support for 2 SDRAM chip selectsJean Pihet2009-07-24
| | | | | | | | | | | | | | | | | | | | | | Some OMAP3 boards (Beagle Cx, Overo, RX51, Pandora) have 2 SDRAM parts connected to the SDRC. This patch adds the following: - add a new argument of type omap_sdrc_params struct* to omap2_init_common_hw and omap2_sdrc_init for the 2nd CS params - adapted the OMAP boards files to the new prototype of omap2_init_common_hw - add the SDRC 2nd CS registers offsets defines - adapt the sram sleep code to configure the SDRC for the 2nd CS Note: If the 2nd param to omap2_init_common_hw is NULL, then the parameters are not programmed into the SDRC CS1 registers Tested on 3430 SDP and Beagleboard rev C2 and B5, with suspend/resume and frequency changes (cpufreq). Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 SDRC: set FIXEDDELAY when disabling SDRC DLLPaul Walmsley2009-06-19
| | | | | | | | | | Correspondence with the TI OMAP hardware team indicates that SDRC_DLLA_CTRL.FIXEDDELAY should be initialized to 0x0f. This number was apparently derived from process validation. This is only used when the SDRC DLL is unlocked (e.g., SDRC clock frequency less than 83MHz). Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3: Add support for DPLL3 divisor values higher than 2Tero Kristo2009-06-19
| | | | | | Previously only 1 and 2 was supported. This is needed for DVFS VDD2 control. Signed-off-by: Tero Kristo <tero.kristo@nokia.com>
* OMAP3 SRAM: convert SRAM code to use macros rather than magic numbersPaul Walmsley2009-06-19
| | | | | | | Convert omap3_sram_configure_core_dpll() to use macros rather than magic numbers. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 SRAM: add more comments on the SRAM codePaul Walmsley2009-06-19
| | | | | | Clean up comments and copyrights on the CORE DPLL3 M2 divider change code. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 clock/SDRC: program SDRC_MR register during SDRC clock changePaul Walmsley2009-06-19
| | | | | | | | | Program the SDRC_MR_0 register as well during SDRC clock changes. This register allows selection of the memory CAS latency. Some SDRAM chips, such as the Qimonda HYB18M512160AF6, have a lower CAS latency at lower clock rates. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 clock: add a short delay when lowering CORE clk ratePaul Walmsley2009-06-19
| | | | | | | | | | | | | When changing the SDRAM clock from 166MHz to 83MHz via the CORE DPLL M2 divider, add a short delay before returning to SDRAM to allow the SDRC time to stabilize. Without this delay, the system is prone to random panics upon re-entering SDRAM. This time delay varies based on MPU frequency. At 500MHz MPU frequency at room temperature, 64 loops seems to work okay; so add another 32 loops for environmental and process variation. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 clock: remove wait for DPLL3 M2 clock to stabilizePaul Walmsley2009-06-19
| | | | | | | | The original CDP kernel that this code comes from waited for 0x800 loops after switching the CORE DPLL M2 divider. This does not appear to be necessary. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 clock: only unlock SDRC DLL if SDRC clk < 83MHzPaul Walmsley2009-05-12
| | | | | | | | | | | | According to the 34xx TRM Rev. K section 11.2.4.4.11.1 "Purpose of the DLL/CDL Module," the SDRC delay-locked-loop can be locked at any SDRC clock frequency from 83MHz to 166MHz. CDP code unconditionally unlocked the DLL whenever shifting to a lower SDRC speed, but this seems unnecessary and error-prone, as the DLL is no longer able to compensate for process, voltage, and temperature variations. Instead, only unlock the DLL when the SDRC clock rate would be less than 83MHz. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 SRAM: renumber registers to make space for argument passingPaul Walmsley2009-05-12
| | | | | | | Renumber registers in omap3_sram_configure_core_dpll() assembly code to make space for additional parameters. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 SRAM: clear the SDRC PWRENA bit during SDRC frequency changePaul Walmsley2009-05-12
| | | | | | | | Clear the SDRC_POWER.PWRENA bit before putting the SDRAM into self-refresh mode. This prevents the SDRC from attempting to power off the SDRAM, which can cause the system to hang. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 clock: add interconnect barriers to CORE DPLL M2 changePaul Walmsley2009-05-12
| | | | | | | Where necessary, add interconnect barriers to force posted writes to complete before continuing. Signed-off-by: Paul Walmsley <paul@pwsan.com>
* OMAP3 SRAM: add ARM barriers to omap3_sram_configure_core_dpllPaul Walmsley2009-05-12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add more barriers in the SRAM CORE DPLL M2 divider change code. - Add a DSB SY after the function's entry point to flush all cached and buffered writes and wait for the interconnect to claim that they have completed[1]. The idea here is to force all delayed write traffic going to the SDRAM to at least post to the L3 interconnect before continuing. If these writes are allowed to occur after the SDRC is idled, the writes will not be acknowledged and the ARM will stall. Note that in this case, it does not matter if the writes actually complete to the SDRAM - it is only necessary for the writes to leave the ARM itself. If the writes are posted by the interconnect when the SDRC goes into idle, the writes will be delayed until the SDRC returns from idle[2]. If the SDRC is in the middle of a write when it is requested to enter idle, the SDRC will not acknowledge the idle request until the writes complete to the SDRAM.[3] The old-style DMB in sdram_in_selfrefresh is now superfluous, so, remove it. - Add an ISB before the function's exit point to prevent the ARM from speculatively executing into SDRAM before the SDRAM is enabled[4]. ... 1. ARMv7 ARM (DDI 0406A) A3-47, A3-48. 2. Private communication with Richard Woodruff <r-woodruff2@ti.com>. 3. Private communication with Richard Woodruff <r-woodruff2@ti.com>. 4. ARMv7 ARM (DDI 0406A) A3-48. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Richard Woodruff <r-woodruff2@ti.com>
* ARM: OMAP3: Add minimal omap3430 supportSyed Mohammed, Khasim2008-10-09
Add minimal omap3430 support based on earlier patches from Syed Mohammed Khasim. Also merge in omap34xx SRAM support from Karthik Dasu and use consistent naming for sram init functions. Also do following changes that make 34xx support usable: - Remove unused sram.c functions for 34xx - Rename IRQ_SIR_IRQ to INTCPS_SIR_IRQ and define it locally in entry-macro.S - Update mach-omap2/io.c to support 2420, 2430, and 34xx - Also merge in 34xx GPMC changes to add fields wr_access and wr_data_mux_bus from Adrian Hunter - Remove memory initialization call omap2_init_memory() until until more generic memory initialization patches are posted. It's OK to rely on bootloader initialization until then. Signed-off-by: Syed Mohammed, Khasim <khasim@ti.com> Signed-off-by: Karthik Dasu<karthik-dp@ti.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>