aboutsummaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/net
Commit message (Collapse)AuthorAge
* net: mvneta: introduce compatible string "marvell, armada-xp-neta"Simon Guinot2015-07-10
| | | | | | | | | | | | | | | | | | [ Upstream commit f522a975a8101895a85354b9c143f41b8248e71a ] The mvneta driver supports the Ethernet IP found in the Armada 370, XP, 380 and 385 SoCs. Since at least one more hardware feature is available for the Armada XP SoCs then a way to identify them is needed. This patch introduces a new compatible string "marvell,armada-xp-neta". Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Cc: <stable@vger.kernel.org> # v3.8+ Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* net: macb: Document zynq gem dt bindingNathan Sullivan2015-05-22
| | | | | | Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2015-04-22
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM DT updates from Olof Johansson: "As always, this tends to be one of our bigger branches. There are lots of updates this release, but not that many jumps out as something that needs more detailed coverage. Some of the highlights are: - DTs for the new Annapurna Labs Alpine platform - more graphics DT pieces falling into place on Exynos, bridges, clocks. - plenty of DT updates for Qualcomm platforms for various IP blocks - some churn on Tegra due to switch-over to tool-generated pinctrl data - misc fixes and updates for Atmel at91 platforms - various DT updates to add IP block support on Broadcom's Cygnus platforms - more updates for Renesas platforms as DT support is added for various IP blocks (IPMMU, display, audio, etc)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (231 commits) ARM: dts: alpine: add internal pci Revert "ARM: dts: mt8135: Add pinctrl/GPIO/EINT node for mt8135." ARM: mvebu: use 0xf1000000 as internal registers on Armada 370 DB ARM: dts: qcom: Add idle state device nodes for 8064 ARM: dts: qcom: Add idle states device nodes for 8084 ARM: dts: qcom: Add idle states device nodes for 8974/8074 ARM: dts: qcom: Update power-controller device node for 8064 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8084 Krait CPUs ARM: dts: qcom: Add power-controller device node for 8074 Krait CPUs devicetree: bindings: Document qcom,idle-states devicetree: bindings: Update qcom,saw2 node bindings dt-bindings: Add #defines for MSM8916 clocks and resets arm: dts: qcom: Add LPASS Audio HW to IPQ8064 device tree arm: dts: qcom: Add APQ8084 chipset SPMI PMIC's nodes arm: dts: qcom: Add 8x74 chipset SPMI PMIC's nodes arm: dts: qcom: Add SPMI PMIC Arbiter nodes for APQ8084 and MSM8974 arm: dts: qcom: Add LCC nodes arm: dts: qcom: Add TCSR support for MSM8960 arm: dts: qcom: Add TCSR support for MSM8660 arm: dts: qcom: Add TCSR support for IPQ8064 ...
| * dt: bindings: add TI's wilink wireless deviceEliad Peller2015-03-24
| | | | | | | | | | | | | | | | | | | | Add device tree binding documentation for TI's wilink (wl12xx and wl18xx) wlan chip. Signed-off-by: Eliad Peller <eliad@wizery.com> Tested-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* | Merge tag 'devicetree-for-linus' of ↵Linus Torvalds2015-04-18
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree changes from Grant Likely: "Here are the devicetree changes queued up for v4.1. Nothing really exciting here. Rob has another few commits for big-endian attached UARTs, but those will be sent in a separate merge request since they haven't been as thoroughly tested as this batch. Here are the highlights: - lots of unittest cleanup from Frank Rowand - bugfixes and updates to the of_graph code - tighten up of_get_mac_address() code - documentation updates" * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/unittest: Fix of_platform_depopulate test case of/unittest: early return from test skips tests of/unittest: breadcrumbs to reduce pain of future maintainers of/unittest: reduce checkpatch noise - line after declarations of/unittest: typo in error string of/unittest: add const where needed of_net: factor out repetitive code from of_get_mac_address() drivers/of: Add empty ranges quirk for PA-Semi of: Allow selection of OF_DYNAMIC and OF_OVERLAY if OF_UNITTEST of: Empty node & property flag accessors when !OF of: Explicitly include linux/types.h in of_graph.h dt-bindings: brcm: rationalize Broadcom documentation naming of/unittest: replace 'selftest' with 'unittest' Documentation: rename of_selftest.txt to of_unittest.txt Documentation: update the of_selftest.txt dt: OF_UNITTEST make dependency broken MAINTAINERS: Pantelis Antoniou device tree overlay maintainer of: Add of_graph_get_port_by_id function of: Add for_each_endpoint_of_node helper macro of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint
| * | dt-bindings: brcm: rationalize Broadcom documentation namingScott Branden2015-03-26
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patchset attempts to standardize the naming of dt-bindings documents based on the Broadcom vendor prefix of brcm. Although there are no guidelines currently present for how to name the dt-bindings document the "vendor,binding.txt" style is in use by some of the other vendors. Acked-by: Lee Jones <lee@kernel.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Rob Herring <robh@kernel.org>
* | stmmac: Add properties for transmit and receive fifo sizesVince Bridgers2015-04-16
| | | | | | | | | | | | | | | | | | | | The Synopsys stmmac fifo sizes are configurable, and need to be known in order to configure certain controller features. This patch adds tx-fifo-depth and rx-fifo-depth properties to the stmmac document file. Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'nfc-next-4.1-1' of ↵David S. Miller2015-04-08
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz says: ==================== NFC: 4.1 pull request This is the NFC pull request for 4.1. This is a shorter one than usual, as the Intel Field Peak NFC driver could not make it in time. We have: - A new driver for NXP NCI based chipsets, like e.g. the NPC100 or the PN7150. It currently only supports an i2c physical layer, but could easily be extended to work on top of e.g. SPI. This driver also includes support for user space triggered firmware updates. - A few minor st21nfc[ab] fixes, cleanups, and comments improvements. - A pn533 error return fix. - A few NFC related logs formatting cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | NFC: nxp-nci_i2c: Add I2C support to NXP NCI driverClément Perrochaud2015-03-26
| | | | | | | | | | | | | | | | | | | | | | | | Add a module to the NXP-NCI driver to support NFC controllers with an I2C control interface, such as the NPC100. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | stmmac: Add an optional register interface clockAndrew Bresticker2015-04-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DWMAC block on certain SoCs (such as IMG Pistachio) have a second clock which must be enabled in order to access the peripheral's register interface, so add support for requesting and enabling an optional "pclk". Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Cc: James Hartley <james.hartley@imgtec.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-04-06
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/mellanox/mlx4/cmd.c net/core/fib_rules.c net/ipv4/fib_frontend.c The fib_rules.c and fib_frontend.c conflicts were locking adjustments in 'net' overlapping addition and removal of code in 'net-next'. The mlx4 conflict was a bug fix in 'net' happening in the same place a constant was being replaced with a more suitable macro. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: dsa: fix filling routing table from OF descriptionPavel Nakonechny2015-04-06
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to description in 'include/net/dsa.h', in cascade switches configurations where there are more than one interconnected devices, 'rtable' array in 'dsa_chip_data' structure is used to indicate which port on this switch should be used to send packets to that are destined for corresponding switch. However, dsa_of_setup_routing_table() fills 'rtable' with port numbers of the _target_ switch, but not current one. This commit removes redundant devicetree parsing and adds needed port number as a function argument. So dsa_of_setup_routing_table() now just looks for target switch number by parsing parent of 'link' device node. To remove possible misunderstandings with the way of determining target switch number, a corresponding comment was added to the source code and to the DSA device tree bindings documentation file. This was tested on a custom board with two Marvell 88E6095 switches with following corresponding routing tables: { -1, 10 } and { 8, -1 }. Signed-off-by: Pavel Nakonechny <pavel.nakonechny@skitlab.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Documentation: dts: xgene: Update interrupt field descriptionIyappan Subramanian2015-03-27
| |/ |/| | | | | | | | | Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: ethss: enhancement to support NetCP 1.5 ethssWingMan Kwok2015-03-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NetCP 1.5 available on newer K2 SoCs such as K2E and K2L introduced 3 variants of the ethss subsystem, 9 port, 5 port and 2 port. These have one host port towards the CPU and N external slave ports. To customize the driver for these new ethss sub systems, multiple compatibility strings are introduced. Currently some of parameters that are different on different variants such as number of ALE ports, stats modules and number of ports are defined through constants. These are now changed to variables in gbe_priv data that get set based on the compatibility string. This is required as there are no hardware identification registers available to distinguish among the variants of NetCP 1.5 ethss. However there is identification register available to differentiate between NetCP 1.4 vs NetCP 1.5 and the same is made use of in the code to differentiate them. For more reading on the details of this peripheral, please refer to the User Guide available at http://www.ti.com/lit/pdf/spruhz3 Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: netcp: use separate reg region for individual ethss modulesKaricheri, Muralidharan2015-03-20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ethss has multiple modules within the sub system - switch sub system - sgmii - mdio - switch module NetCP driver re-uses existing davinci mdio driver. It requires to have its own register region to map the reg space. So restructure the code to use separate reg region for the individual modules it manages. Use range property to define register space of NetCP and use reg property to define individual reg spaces. So MDIO will have its own reg space to map. This is a pre-requisite to enable MDIO driver for NetCP. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'for-upstream' of ↵David S. Miller2015-03-19
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2015-03-19 This wont the last 4.1 bluetooth-next pull request, but we've piled up enough patches in less than a week that I wanted to save you from a single huge "last-minute" pull somewhere closer to the merge window. The main changes are: - Simultaneous LE & BR/EDR discovery support for HW that can do it - Complete LE OOB pairing support - More fine-grained mgmt-command access control (normal user can now do harmless read-only operations). - Added RF power amplifier support in cc2520 ieee802154 driver - Some cleanups/fixes in ieee802154 code Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * | cc2520: Add support for CC2591 amplifier.Brad Campbell2015-03-18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TI CC2521 is an RF power amplifier that is designed to interface with the CC2520. Conveniently, it directly interfaces with the CC2520 and does not require any pins to be connected to a microcontroller/processor. Adding a CC2591 increases the CC2520's range, which is useful for border router and other wall-powered applications. Using the CC2591 with the CC2520 requires configuring the CC2520 GPIOs that are connected to the CC2591 to correctly set the CC2591 into TX and RX modes. Further, TI recommends that the CC2520_TXPOWER and CC2520_AGCCTRL1 registers are set differently to maximize the CC2591's performance. These settings are covered in TI Application Note AN065. This patch adds an optional `amplified` field to the cc2520 entry in the device tree. If present, the CC2520 will be configured to operate with a CC2591. The expected pin mapping is: CC2520 GPIO0 --> CC2591 EN CC2520 GPIO5 --> CC2591 PAEN Signed-off-by: Brad Campbell <bradjc5@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | | Documentation: dtb: Add port-id field for APM X-Gene ethernetKeyur Chudgar2015-03-18
|/ / | | | | | | | | | | Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-09
|\| | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/cadence/macb.c Overlapping changes in macb driver, mostly fixes and cleanups in 'net' overlapping with the integration of at91_ether into macb in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Documentation: dts: Update compatible field description for APM X-GeneIyappan Subramanian2015-03-04
| | | | | | | | | | | | | | Signed-off-by: Iyappan Subramanian <isubramanian@apm.com> Signed-off-by: Keyur Chudgar <kchudgar@apm.com> Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/macb: Update DT bindings documentationBoris BREZILLON2015-03-08
| | | | | | | | | | | | | | | | | | | | Add missing "cdns,at91sam9260-macb", "atmel,sama5d3-gem" and "atmel,sama5d4-gem" compatible strings. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-03-03
|\| | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * amd-xgbe-phy: PHY KX/KR mode differencesTom Lendacky2015-02-25
| | | | | | | | | | | | | | | | | | | | | | | | | | The PHY requires different settings for the Decision Feedback Analyzer (DFE) when running in KX mode vs. KR mode. Update the code to change these settings when changing modes in order to provide a more stable link. Additionally, adjust the 10GbE PQ skew default setting to a more sane value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | at86rf230: add warning if edge-triggered irqAlexander Aring2015-02-27
| | | | | | | | | | | | | | | | | | | | | | | | | | While testing I experience a deadlock while using the at86rf233 on a raspberry pi. The reason was an edge triggered gpio irq because the irq triggered while irq was disabled. This issue doesn't happend on a level triggered irq because the irq will hit after calling enable_irq. This patch adds a warning that it's not recommended to use a edge-triggered irq type. Also change the examples to high-level irqtype. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* | at86rf230: add support for external xtal trimAlexander Aring2015-02-27
|/ | | | | | | | This patch adds support for setting the xtal trim register. Some at86rf2xx transceiver boards needs fine tuning the xtal capacitor. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
* Merge tag 'docs-for-linus' of git://git.lwn.net/linux-2.6Linus Torvalds2015-02-11
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull documentation updates from Jonathan Corbet: "Highlights this time around include: - A thrashing of SubmittingPatches to bring it out of the "send everything to Linus" era of kernel development. - A new document on completions from Nicholas McGuire - Lots of typo fixes, formatting improvements, corrections, build fixes, and more" * tag 'docs-for-linus' of git://git.lwn.net/linux-2.6: (35 commits) Documentation: Fix the wrong command `echo -1 > set_ftrace_pid` for cleaning the filter. can-doc: Fixed a wrong filepath in can.txt Documentation: Fix trivial typo in comment. kgdb,docs: Fix typo and minor style issues Documentation: add description for FTRACE probe status doc: brief user documentation for completion Documentation/misc-devices/mei: Fix indentation of embedded code. Documentation/misc-devices/mei: Fix indentation of enumeration. Documentation/misc-devices/mei: Fix spacing around parentheses. Documentation/misc-devices/mei: Fix formatting of headings. Documentation: devicetree: Fix double words in Doumentation/devicetree Documentation: mm: Fix typo in vm.txt lockstat: Add documentation on contention and contenting points Documentation: fix blackfin gptimers-example build errors Fixes column alignment in table of contents entry 1.9 in Documentation/filesystems/proc.txt CodingStyle: enable emacs display of trailing whitespace DocBook: Do not exceed argument list limit gpio: board.txt: Fix the gpio name example Documentation/SubmittingPatches: unify whitespace/tabs for the DCO MAINTAINERS: Add the docs-next git tree to the maintainer entry ...
| * Documentation: devicetree: Fix double words in Doumentation/devicetreeMasanari Iida2015-01-28
| | | | | | | | | | | | | | | | This patch fix multiple words such as "the the" and "which which" in Documentation/devicetree. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* | net/fsl_pq_mdio: Document supported compatiblesShruti Kanetkar2015-02-03
| | | | | | | | | | | | | | | | | | | | | | The device tree binding(s) document has fallen out of sync with the driver code. Update the list of supported devices to reflect current driver capabilities Change-Id: I440d8de2ee2d9c3b7b23e69b3da851cab18a4c9a Signed-off-by: Shruti Kanetkar <Kanetkar.Shruti@gmail.com> Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge tag 'nfc-next-3.20-1' of ↵David S. Miller2015-01-29
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next NFC: 3.20 first pull request This is the first NFC pull request for 3.20. With this one we have: - Secure element support for the ST Micro st21nfca driver. This depends on a few HCI internal changes in order for example to support more than one secure element per controller. - ACPI support for NXP's pn544 HCI driver. This controller is found on many x86 SoCs and is typically enumerated on the ACPI bus there. - A few st21nfca and st21nfcb fixes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | NFC: dts: st21nfca: Document ese-present & uicc-present DTS propertyChristophe Ricard2015-01-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On st21nfca, the mechanism to enable a secure element needs to add 2 properties in order manage the SWP line correctly. Document ese-present and uicc-present properties. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | NFC: dts: st21nfcb: Fix compatible string spelling to follow other driversChristophe Ricard2015-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Other drivers are following the following compatible string format for dts: s/_/-/ Because some devices may still use the previous string, the new corrected string is added to the of_device_id table. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | NFC: dts: st21nfca: Fix compatible string spelling to follow other driversChristophe Ricard2015-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Other drivers are following the following compatible string format for dts: s/_/-/ Because some devices may still use the previous string, the new corrected string is added to the of_device_id table. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2015-01-27
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | net: davinci_emac: Add support for emac on dm816xTony Lindgren2015-01-16
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | On dm816x we have two emac controllers with separate memory areas. Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | Merge branch 'master' of ↵David S. Miller2015-01-26
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== pull-request: wireless-drivers-next 2015-01-22 now a bigger pull request for net-next. Rafal found a UTF-8 bug in patchwork[1] and because of that two commits (d0c102f70aec and d0f66df5392a) have his name corrupted: Acked-by: Rafa? Mi?ecki <zajec5@gmail.com> Somehow I failed to spot that when I commited the patches. As rebasing public git trees is bad, I thought we can live with these and decided not to rebase. But I'll pay close attention to this in the future to make sure that it won't happen again. Also we requested an update to patchwork.kernel.org, the latest patchwork doesn't seem to have this bug. Also please note this pull request also adds one DT binding doc, but this was reviewed in the device tree list: .../bindings/net/wireless/qcom,ath10k.txt | 30 + Please let me know if you have any issues. [1] https://lists.ozlabs.org/pipermail/patchwork/2015-January/001261.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * \ \ Merge ath-next from ath.gitKalle Valo2015-01-09
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Major changes in ath10k: * Device tree support * Major restructuring how to handle different WMI interface versions * Add WMI TLV interface in preparation for new firmware interface support * Support new firmware branch 10.2.4 * Add thermal cooling interface * Add hwmon interface to read temparture from the device And of course lots of small fixes and cleanups.
| | * | | dt: bindings: add ath10k wireless deviceKalle Valo2014-12-08
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Document how calibration data can be provided to ath10k via Device Tree. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* | | | | stmmac: Add an optional device tree property "snps,burst_len"Sonic Zhang2015-01-26
| |_|_|/ |/| | | | | | | | | | | | | | | | | | | | | | | This property define the AXI bug lenth. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | dt-bindings: Document phy-supply property in rockchip-dwmacRomain Perier2015-01-24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As no property for phy regulator was documented in this dt-binding documentation, this commit adds an entry for the optional property phy-supply. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Documentation: dt: net: Add binding doc for Keystone NetCP ethernet driverKaricheri, Muralidharan2015-01-19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The network coprocessor (NetCP) is a hardware accelerator that processes Ethernet packets. NetCP has a gigabit Ethernet (GbE) subsystem with a ethernet switch sub-module to send and receive packets. NetCP also includes a packet accelerator (PA) module to perform packet classification operations such as header matching, and packet modification operations such as checksum generation. NetCP can also optionally include a Security Accelerator(SA) capable of performing IPSec operations on ingress/egress packets. Keystone SoC's also have a 10 Gigabit Ethernet Subsystem (XGbE) which includes a 3-port Ethernet switch sub-module capable of 10Gb/s and 1Gb/s rates per Ethernet port. NetCP Subsystem device tree layout looks something like below: ----------------------------- NetCP subsystem(10G or 1G) ----------------------------- | |-> NetCP Devices -> | | |-> GBE/XGBE Switch | | | |-> Packet Accelerator | | | |-> Security Accelerator | | | |-> NetCP Interfaces -> | |-> Ethernet Port 0 | |-> Ethernet Port 1 | |-> Ethernet Port 2 | |-> Ethernet Port 3 Common driver supports GBE as well XGBE network processors. Cc: Rob Herring <robh+dt@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: David Miller <davem@davemloft.net> Cc: Santosh Shilimkar <santosh.shilimkar@kernel.org> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | amd-xgbe-phy: Allow certain PHY settings to be set by UEFILendacky, Thomas2015-01-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Certain PHY settings need to be configurable by UEFI depending on the platform being used. Add new device tree / ACPI properties that, if present, will override the pre-determined values currently used. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | amd-xgbe-phy: Change auto-negotiation logicLendacky, Thomas2015-01-16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The auto negotiation logic was geared to being the initiator of the auto negotiation. This presented problems when auto negotiation was initiated by the remote end. Change the auto negotiation logic to make use of the auto negotiation event interrupt thus allowing the auto negotiation state machine to function properly in either scenario. This also removes the polling during auto-negotiation. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | dm9000: Add regulator and reset support to dm9000Zubair Lutfullah Kakakhel2015-01-15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In boards, the dm9000 chip's power and reset can be controlled by gpio. It makes sense to add them to the dm9000 driver and let dt be used to enable power and reset the phy. Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | Documentation: add Device tree bindings for Hisilicon hip04 ethernetZhangfei Gao2015-01-14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the Device Tree bindings for the Hisilicon hip04 Ethernet controller, including 100M / 1000M controller. Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | | stmmac: dwmac-sti: Pass sysconfig register offset via syscon dt property.Peter Griffin2015-01-11
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161, we should not be mixing address spaces in the reg property like this driver currently does. This patch updates the driver, dt docs and also the existing dt nodes to pass the sysconfig offset in the syscon dt property. This patch breaks DT compatibility! But this platform is considered WIP, and is only used by a few developers who are upstreaming support for it. This change has been done as a single atomic commit to ensure it is bisectable. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | GMAC: add document for Rockchip RK3288 GMACRoger Chen2014-12-31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The document descripts how to add properties for GMAC in device tree. change since v2: 1. remove power-gpio, reset-gpio, phyirq-gpio, pmu_regulator setting 2. add "snps,reset-gpio", "snps,reset-active-low;" "snps,reset-delays-us" Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | | net: fec: add Wake-on-LAN supportNimrod Andy2014-12-31
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for Wake-on-LAN using Magic Packet. ENET IP supports sleep mode in low power status, when system enter suspend status, Magic packet can wake up system even if all SOC clocks are gate. The patch doing below things: - flagging the device as a wakeup source for the system, as well as its Wake-on-LAN interrupt - prepare the hardware for entering WoL mode - add standard ethtool WOL interface - enable the ENET interrupt to wake us Tested on i.MX6q/dl sabresd, sabreauto boards, i.MX6SX arm2 boards. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dt/bindings: add clock-select function property to micrel phy bindingJohan Hovold2014-11-21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add "micrel,rmii-reference-clock-select-25-mhz" to Micrel ethernet PHY binding documentation. This property is needed to properly describe some revisions of Micrel PHYs which has the function of this configuration bit inverted so that setting it enables 25 MHz rather than 50 MHz clock mode. Note that a clock reference ("rmii-ref") is still needed to actually select either mode. Cc: devicetree@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* | dt/bindings: reformat micrel eth-phy documentationJohan Hovold2014-11-21
| | | | | | | | | | | | | | | | | | | | Reduce indentation of Micrel PHY binding documentations somewhat. Also fix "reference input clock" typo while at it. Cc: devicetree@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: phy: micrel: add support for clock-mode select to KSZ8081/KSZ8091Johan Hovold2014-11-21
| | | | | | | | | | | | | | | | | | | | | | | | | | Micrel KSZ8081 and KSZ8091 PHYs have the RMII Reference Clock Select bit, which is used to select 25 or 50 MHz clock mode. Note that on some revisions of the PHY (e.g. KSZ8081RND) the function of this bit is inverted so that setting it enables 25 rather than 50 MHz mode. Add a new device-tree property "micrel,rmii-reference-clock-select-25-mhz" to describe this. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.2 (git 2.25.0) at 2025-03-22 20:40:40 -0400